[ViewVC] Diff of: cvs/EV/Makefile.PL

Comparing EV/Makefile.PL (file contents):
Revision 1.34 by root, Thu Oct 2 12:26:25 2008 UTC vs.
Revision 1.63 by root, Fri Jul 12 06:18:37 2019 UTC

…		…
1	use 5.006;	1	use strict qw(vars subs);
2		2	use Canary::Stability EV => 1, 5.008002;
3	use Config;	3	use Config;
4	use ExtUtils::MakeMaker;	4	use ExtUtils::MakeMaker;
5		5
		6	sub have_inc($) {
		7	scalar grep -r "$_/$_[0]", $Config{usrinc}, split / /, $Config{incpth}
		8	}
		9
		10	my $DEFINE;
		11
6	unless (-e "libev/ev_epoll.c") {	12	unless (-e "libev/ev_linuxaio.c") {
7	print <<EOF;	13	print <<EOF;
8		14
9	***	15	***
10	*** ERROR: libev is missing or damaged. If you used a CVS check-out of EV,	16	*** ERROR: libev is missing or damaged. If you used a CVS check-out of EV,
11	*** you also have to check-out the "libev" module from the same CVS	17	*** you also have to check-out the "libev" module from the same CVS
34		40
35	* * * * * * * * * * * * * * * * * *	41	* * * * * * * * * * * * * * * * * *
36		42
37		43
38	POSIX optionally offers support for a monotonic clock source. EV	44	POSIX optionally offers support for a monotonic clock source. EV
39	can take advantage of this clock source to detect time jumps	45	can take advantage of this clock source to detect time jumps more
40	reliably. Unfortunately, some systems are bound to be broken, so you can	46	reliably. Unfortunately, some systems are bound to be broken, so you can
41	disable this here: you can completely disable the detection and use of	47	disable this here: you can completely disable the detection and use of
42	the monotonic clock by answering 'n' here. Support for this clock type	48	the monotonic clock by answering 'n' here. Support for this clock type
43	will otherwise be autodetected at both compile- and runtime. (this setting	49	will otherwise be autodetected at both compile- and runtime. (this setting
44	currently affects the use of nanosleep over select as well).	50	currently affects the use of nanosleep over select as well).
45		51
46	EOF	52	EOF
47		53
48	$DEFINE .= " -DEV_USE_MONOTONIC=" . (0 + (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/));	54	unless (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/) {
		55	$DEFINE .= " -DEV_USE_MONOTONIC=0";
		56	}
49		57
50	print <<EOF;	58	print <<EOF;
51		59
52	* * * * * * * * * * * * * * * * * *	60	* * * * * * * * * * * * * * * * * *
53		61
54		62
55	POSIX optionally offers support for a (potentially) high-resolution	63	POSIX optionally offers support for a (potentially) high-resolution
56	realtime clock interface. In a good implementation, using it is faster	64	realtime clock interface. In a good implementation, using it is faster
57	than the normal method of using gettimeofday. Unfortunately, this option	65	than the normal method of using gettimeofday. Unfortunately, this option
58	is also bound to be broken on some systems, so you can disable use and	66	is also bound to be broken on some systems, and current EV versions do not
59	probing of this feature altogether here. Otherwise support for this clock	67	actually call gettimeofday very often, so it defaults to no.
60	type will be autodetected at compiletime.
61		68
62	EOF	69	EOF
63		70
64	$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "y") =~ /[yY]/));	71	$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "n") =~ /[yY]/));
65		72
66	print <<EOF;	73	print <<EOF;
67		74
68	* * * * * * * * * * * * * * * * * *	75	* * * * * * * * * * * * * * * * * *
69		76
70		77
71	Another useful bit of functionality is the Linux eventfd, which is useful
72	for faster signal handling (don't care) and intra-thread communications
73	(mostly useful for embedding). Kernel support for this will be probed at
74	runtime, but your libc must contain the necessary wrapper. Glibc 2.7 and
75	later should have this wrapper.
76
77	EOF
78
79	$DEFINE .= " -DEV_USE_EVENTFD=" . (0 + (prompt ("Enable linux eventfd support (y/n)?", (-e "/usr/include/sys/eventfd.h") \|\| $ENV{EV_EVENTFD} ? "y" : "n") =~ /[yY]/));
80
81	print <<EOF;
82
83	* * * * * * * * * * * * * * * * * *
84
85
86	EV can use various backends with various portability issue. The select	78	EV can use various backends with various portability issues. The select
87	backend is the most portable and makes for a good fallback, but it can be	79	backend is the most portable and makes for a good fallback, but it can be
88	limited to a low number of file descriptors and/or might not compile. If	80	limited to a low number of file descriptors and/or might not compile. If
89	you have problems with compiling ev_select.c, you might try to play around	81	you have problems with compiling ev_select.c, you might try to play around
90	with disabling it here, or forcing it to use the fd_set provided by your	82	with disabling it here, or forcing it to use the fd_set provided by your
91	OS, via the next question. I highly recommend keeping it in.	83	OS, via the next question. I highly recommend keeping it in.
…		…
108		100
109	EOF	101	EOF
110		102
111	if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {	103	if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {
112	$DEFINE .= " -DEV_SELECT_USE_FD_SET";	104	$DEFINE .= " -DEV_SELECT_USE_FD_SET";
113	}	105	}
114	} else {	106	} else {
115	$DEFINE .= " -DEV_USE_SELECT=0";	107	$DEFINE .= " -DEV_USE_SELECT=0";
116	}	108	}
117		109
118	print <<EOF;	110	print <<EOF;
119		111
120	* * * * * * * * * * * * * * * * * *	112	* * * * * * * * * * * * * * * * * *
121		113
…		…
125	doesn't work), but works basically everywhere else. It is recommended to use	117	doesn't work), but works basically everywhere else. It is recommended to use
126	the default here unless you run into compile problems in ev_poll.c.	118	the default here unless you run into compile problems in ev_poll.c.
127		119
128	EOF	120	EOF
129		121
130	$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (-e "/usr/include/poll.h") ? "y" : "n") =~ /[yY]/));	122	$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (have_inc "poll.h") ? "y" : "n") =~ /[yY]/));
131		123
132	print <<EOF;	124	print <<EOF;
133		125
134	* * * * * * * * * * * * * * * * * *	126	* * * * * * * * * * * * * * * * * *
135		127
…		…
142	fall back to using select when epoll isn't available. If unsure, accept	134	fall back to using select when epoll isn't available. If unsure, accept
143	the default.	135	the default.
144		136
145	EOF	137	EOF
146		138
		139	my $can_epoll = have_inc "sys/epoll.h";
		140	$can_epoll = $ENV{EV_EPOLL} if exists $ENV{EV_EPOLL};
147	$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", (-e "/usr/include/sys/epoll.h") ? "y" : "n") =~ /[yY]/));	141	$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", $can_epoll ? "y" : "n") =~ /[yY]/));
		142
		143	print <<EOF;
		144
		145	* * * * * * * * * * * * * * * * * *
		146
		147
		148	Linux 4.18 introduced another event polling interface, this time using
		149	the Linux AIO API. While this API is far superior to epoll and almost
		150	rivals kqueue, it also suffers from the same issues as kqueue typically
		151	does: only a subset of file types are supported (as of 4.19, I have seen
		152	eventfd, pipes, sockets files and some devices, but no ttys). It also
		153	is subject arbitrary system-wide limits imposed on it. Therefore, this
		154	backend is not used by default, even when it is compiled in, and you have
		155	to request it explicitly, e.g. with LIBEV_FLAGS=64. If unsure, accept the
		156	default.
		157
		158	EOF
		159
		160	my $can_linuxaio = have_inc "linux/aio_abi.h";
		161	$can_linuxaio = $ENV{EV_LINUXAIO} if exists $ENV{EV_LINUXAIO};
		162	$can_linuxaio = 0 + (prompt ("Enable linux aio backend (y/n)?", $can_linuxaio ? "y" : "n") =~ /[yY]/);
		163	$DEFINE .= " -DEV_USE_LINUXAIO=$can_linuxaio";
		164
		165	if ($can_linuxaio) {
		166	print <<EOF;
		167
		168	* * * * * * * * * * * * * * * * * *
		169
		170
		171	The previously mentioned Linux AIO backend is experimental and will not
		172	be used unless requested explicitly. You can, howeer, choose to make ti a
		173	recommended basckend, which means it will be chosen if available even when
		174	not explicitly asked for, in preference to epoll on GNU/Linux. This option
		175	is likely temporary. When unsure, accept the default.
		176
		177	EOF
		178
		179	my $recommend_linuxaio = 0;
		180	$recommend_linuxaio = $ENV{EV_RECOMMEND_LINUXAIO} if exists $ENV{EV_RECOMMEND_LINUXAIO};
		181	$recommend_linuxaio = 0 + (prompt ("Treat linux aio as a recommended backend (y/n)?", $recommend_linuxaio ? "y" : "n") =~ /[yY]/);
		182	$DEFINE .= " -DEV_RECOMMEND_LINUXAIO=$recommend_linuxaio";
		183	}
148		184
149	print <<EOF;	185	print <<EOF;
150		186
151	* * * * * * * * * * * * * * * * * *	187	* * * * * * * * * * * * * * * * * *
152		188
…		…
155	many BSD systems. Support for kqueue will be detected at runtime, with a	191	many BSD systems. Support for kqueue will be detected at runtime, with a
156	safe fallback to other methods when it cannot be used.	192	safe fallback to other methods when it cannot be used.
157		193
158	Note that kqueue is broken on most operating systems, so by default it	194	Note that kqueue is broken on most operating systems, so by default it
159	won't be used on many platforms, but you can still create your own event	195	won't be used on many platforms, but you can still create your own event
160	loop with qkueue backend.	196	loop with kqueue backend if you ask specifically for it.
161		197
162	Here is what we know:	198	Here is what we know:
163		199
164	NetBSD: partially working in at least 3.1. Yeah! :)	200	NetBSD: partially working in at least 3.1 and later. Yeah! :)
165	FreeBSD: broken on at least 6.2-STABLE,	201	FreeBSD: broken on at least 6.2-STABLE, spotty in later versions,
166	sockets likely work, ptys definitely don't.	202	sockets likely work, ptys definitely don't.
167	OpenBSD: reports indicate that it likely doesn't work	203	OpenBSD: reports indicate that it likely doesn't work
168	(similar problems as on FreeBSD).	204	(similar problems as on FreeBSD).
169	OS X: completely, utterly broken on at least < 10.5.	205	OS X: completely, utterly broken on at least <= 10.6.
170		206
171	EOF	207	EOF
172		208
173	my $can_kqueue = -e "/usr/include/sys/event.h";	209	# minix has all the header files, but no implementation. won-der-ful.
174		210	my $can_kqueue = have_inc "sys/event.h" && $^O ne "minix";
		211	$can_kqueue = $ENV{EV_KQUEUE} if exists $ENV{EV_KQUEUE};
175	$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));	212	$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));
176		213
177	print <<EOF;	214	print <<EOF;
178		215
179	* * * * * * * * * * * * * * * * * *	216	* * * * * * * * * * * * * * * * * *
…		…
183	solaris 10 event port interface. Support for event ports will be detected	220	solaris 10 event port interface. Support for event ports will be detected
184	at runtime, with a safe fallback to other methods when it cannot be used.	221	at runtime, with a safe fallback to other methods when it cannot be used.
185		222
186	EOF	223	EOF
187		224
188	$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (-e "/usr/include/sys/port.h") ? "y" : "n") =~ /[yY]/));	225	$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (have_inc "sys/port.h") ? "y" : "n") =~ /[yY]/));
189		226
190	print <<EOF;	227	print <<EOF;
191		228
192	* * * * * * * * * * * * * * * * * *	229	* * * * * * * * * * * * * * * * * *
193		230
…		…
195	EV needs the functions pthread_atfork and clock_gettime. On most systems	232	EV needs the functions pthread_atfork and clock_gettime. On most systems
196	you need some special libraries for this (such as -lrt and -lpthread). You	233	you need some special libraries for this (such as -lrt and -lpthread). You
197	can specify additional libraries to provide these calls (and any other	234	can specify additional libraries to provide these calls (and any other
198	required by EV) now, or accept the default.	235	required by EV) now, or accept the default.
199		236
200	EOF	237	On GNU/Linux systems, EV uses the LSB 3.1 __register_atfork function
		238	to avoid the dependency on libpthread, and directly uses the clock_gettime
		239	syscall to avoid a dependency on librt.
201		240
		241	EOF
		242
202	$SOLARIS_LIBS = $^O =~ /solaris/ ? " -lsocket -lnsl" : "";	243	my $solaris_libs = $^O =~ /solaris/i ? "-lsocket -lnsl" : "";
203		244	my $librt = $^O =~ /linux/i ? "" : "-lpthread -lrt";
		245	my $LIBS = exists $ENV{EV_LIBS} ? $ENV{EV_LIBS} : "$librt $solaris_libs";
204	$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", "-lpthread -lrt$SOLARIS_LIBS";	246	$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", $LIBS;
205		247
206		248
207	print <<EOF;	249	print <<EOF;
208		250
209	* * * * * * * * * * * * * * * * * *	251	* * * * * * * * * * * * * * * * * *
210		252
211		253
212	A backend of a different kind is the Linux inotify(7) interface, which can	254	A backend of a different kind is the Linux inotify(7) interface, which can
213	be used to speed up (and reduce resource consumption) of stat watchers. If	255	be used to speed up (and reduce resource consumption) of stat watchers. If
214	you have it, it is usually a good idea to enable it.	256	you have the include file and libc support for it, it is usually a good
		257	idea to enable it, as kernel availability is detected at runtime.
215		258
216	EOF	259	EOF
217		260
218	my $can_inotify = -e "/usr/include/sys/inotify.h";	261	my $can_inotify = have_inc "sys/inotify.h";
219		262	$can_inotify = $ENV{EV_INOTIFY} if exists $ENV{EV_INOTIFY};
220	$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));	263	$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));
221		264
222	print <<EOF;	265	print <<EOF;
223		266
224	* * * * * * * * * * * * * * * * * *	267	* * * * * * * * * * * * * * * * * *
225		268
226		269
227	EOF	270	Another useful bit of functionality is the Linux eventfd, which is useful
		271	for faster signal handling (don't care) and intra-thread communications
		272	(more relevant). Kernel support for this will be probed at runtime, but
		273	your libc must contain the necessary wrapper. Glibc 2.7 and later should
		274	have this wrapper.
228		275
		276	EOF
		277
		278	my $can_eventfd = have_inc "sys/eventfd.h";
		279	$can_eventfd = $ENV{EV_EVENTFD} if exists $ENV{EV_EVENTFD};
		280	$DEFINE .= " -DEV_USE_EVENTFD=" . (0 + (prompt ("Enable linux eventfd support (y/n)?", $can_eventfd ? "y" : "n") =~ /[yY]/));
		281
		282	print <<EOF;
		283
		284	* * * * * * * * * * * * * * * * * *
		285
		286
		287	Another sometimes useful bit of functionality is the Linux signalfd, which
		288	is useful for faster signal handling (don't care). Kernel support for
		289	this will be probed at runtime, but your libc must contain the necessary
		290	wrapper. Glibc 2.7 and later should have this wrapper.
		291
		292	EOF
		293
		294	my $can_signalfd = have_inc "sys/signalfd.h";
		295	$can_signalfd = $ENV{EV_SIGNALFD} if exists $ENV{EV_SIGNALFD};
		296	$DEFINE .= " -DEV_USE_SIGNALFD=" . (0 + (prompt ("Enable linux signalfd support (y/n)?", $can_signalfd ? "y" : "n") =~ /[yY]/));
		297
		298	print <<EOF;
		299
		300	* * * * * * * * * * * * * * * * * *
		301
		302
		303	Libev contains numerous internal assert() invocations to check for
		304	consistency and user errors. These are normally enabled, but most
		305	perl builds disable this error reporting mechanism by default. You
		306	can re-enable these asserts here. Enabling them might help you catch
		307	programming bugs earlier, but might cause a small slowdown. Also, failures
		308	will be reported by aboritng your program, instead of throwing a perl
		309	exception.
		310
		311	If unsure, enable this if you only use this perl installation for
		312	development, and leave it off for use in production environments.
		313
		314	EOF
		315
		316	my $enable_assertions = 0;
		317	$enable_assertions = 0 + (prompt ("Make sure assertions are enabled? (y/n)?", $enable_assertions ? "y" : "n") =~ /[yY]/);
		318	$DEFINE .= " -DEV_ENABLE_ASERTIONS=1" if $enable_assertions;
		319
		320	print <<EOF;
		321
		322	* * * * * * * * * * * * * * * * * *
		323
		324
		325	Very rarely, people want to tweak EV even more, e.g. to exclude
		326	or include certain watcher types or backends. This can be done by adding
		327	extra -D options here, or via the EV_EXTRA_DEFS environment variable.
		328
		329	For example, if you run into compile problems because of missing memory
		330	fences (or you just want extra performance), you can tell EV to not support
		331	smp and threads via -DEV_NO_THREADS.
		332
		333	Normal persons just press enter.
		334
		335	EOF
		336
		337	$DEFINE .= " " . prompt "Any extra -D options?", "$ENV{EV_EXTRA_DEFS}";
		338
		339	print <<EOF;
		340
		341	* * * * * * * * * * * * * * * * * *
		342
		343
		344	EOF
		345
229	my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 2.6 } ? (AnyEvent => 2.6) : ();	346	my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 5.29 } ? (AnyEvent => 5.29) : ();
230		347
231	WriteMakefile(	348	WriteMakefile(
232	dist => {	349	dist => {
233	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',	350	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',
234	COMPRESS => 'gzip -9v',	351	COMPRESS => 'gzip -9v',
235	SUFFIX => '.gz',	352	SUFFIX => '.gz',
236	},	353	},
237	depend => {	354	depend => {
238	"EV.c" => "EV/EVAPI.h "	355	"EV.c" => "EV/EVAPI.h "
239	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c "	356	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c libev/ev_linuxaio.c "
240	. "libev/ev_vars.h libev/ev_wrap.h",	357	. "libev/ev_vars.h libev/ev_wrap.h",
241	},	358	},
242	INC => "-Ilibev",	359	INC => "-Ilibev",
243	DEFINE => "$DEFINE",	360	DEFINE => "$DEFINE",
244	NAME => "EV",	361	NAME => "EV",
245	LIBS => [$LIBS],	362	LIBS => [$LIBS],
246	PREREQ_PM => {	363	PREREQ_PM => {
247	@anyevent,	364	@anyevent,
		365	"common::sense" => 0,
248	},	366	},
		367	CONFIGURE_REQUIRES => { "ExtUtils::MakeMaker" => 6.52, "Canary::Stability" => 0 },
249	VERSION_FROM => "EV.pm",	368	VERSION_FROM => "EV.pm",
250	PM => {	369	PM => {
251	'EV.pm' => '$(INST_LIBDIR)/EV.pm',	370	'EV.pm' => '$(INST_LIB)/EV.pm',
252	'EV/EVAPI.h' => '$(INST_LIBDIR)/EV/EVAPI.h',	371	'EV/EVAPI.h' => '$(INST_LIB)/EV/EVAPI.h',
253	'EV/MakeMaker.pm' => '$(INST_LIBDIR)/EV/MakeMaker.pm',	372	'EV/MakeMaker.pm' => '$(INST_LIB)/EV/MakeMaker.pm',
254	'libev/ev.h' => '$(INST_LIBDIR)/EV/ev.h',	373	'libev/ev.h' => '$(INST_LIB)/EV/ev.h',
255	'libev/ev.pod' => '$(INST_LIBDIR)/EV/c_doc.pod',	374	'libev/ev.pod' => '$(INST_LIB)/EV/libev.pod',
256	},	375	},
257	MAN3PODS => {	376	MAN3PODS => {
258	'EV.pm' => '$(INST_MAN3DIR)/EV.$(MAN3EXT)',	377	'EV.pm' => '$(INST_MAN3DIR)/EV.$(MAN3EXT)',
259	'EV/MakeMaker.pm' => '$(INST_MAN3DIR)/EV::MakeMaker.$(MAN3EXT)',	378	'EV/MakeMaker.pm' => '$(INST_MAN3DIR)/EV::MakeMaker.$(MAN3EXT)',
260	'libev/ev.pod' => '$(INST_MAN3DIR)/EV::c_doc.$(MAN3EXT)',	379	'libev/ev.pod' => '$(INST_MAN3DIR)/EV::libev.$(MAN3EXT)',
261	},	380	},
262	);	381	);
263		382
264

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing EV/Makefile.PL (file contents): Revision 1.34 by root, Thu Oct 2 12:26:25 2008 UTC vs. Revision 1.63 by root, Fri Jul 12 06:18:37 2019 UTC

Diff Legend

Comparing EV/Makefile.PL (file contents):
Revision 1.34 by root, Thu Oct 2 12:26:25 2008 UTC vs.
Revision 1.63 by root, Fri Jul 12 06:18:37 2019 UTC