[ViewVC] Diff of: cvs/IO-AIO/AIO.pm

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.71 by root, Tue Oct 24 11:57:30 2006 UTC vs.
Revision 1.88 by root, Sun Oct 29 01:50:29 2006 UTC

…		…
51	=head1 DESCRIPTION	51	=head1 DESCRIPTION
52		52
53	This module implements asynchronous I/O using whatever means your	53	This module implements asynchronous I/O using whatever means your
54	operating system supports.	54	operating system supports.
55		55
		56	Asynchronous means that operations that can normally block your program
		57	(e.g. reading from disk) will be done asynchronously: the operation
		58	will still block, but you can do something else in the meantime. This
		59	is extremely useful for programs that need to stay interactive even
		60	when doing heavy I/O (GUI programs, high performance network servers
		61	etc.), but can also be used to easily do operations in parallel that are
		62	normally done sequentially, e.g. stat'ing many files, which is much faster
		63	on a RAID volume or over NFS when you do a number of stat operations
		64	concurrently.
		65
		66	While this works on all types of file descriptors (for example sockets),
		67	using these functions on file descriptors that support nonblocking
		68	operation (again, sockets, pipes etc.) is very inefficient. Use an event
		69	loop for that (such as the L<Event\|Event> module): IO::AIO will naturally
		70	fit into such an event loop itself.
		71
56	Currently, a number of threads are started that execute your read/writes	72	In this version, a number of threads are started that execute your
57	and signal their completion. You don't need thread support in perl, and	73	requests and signal their completion. You don't need thread support
58	the threads created by this module will not be visible to perl. In the	74	in perl, and the threads created by this module will not be visible
59	future, this module might make use of the native aio functions available	75	to perl. In the future, this module might make use of the native aio
60	on many operating systems. However, they are often not well-supported	76	functions available on many operating systems. However, they are often
61	(Linux doesn't allow them on normal files currently, for example),	77	not well-supported or restricted (GNU/Linux doesn't allow them on normal
62	and they would only support aio_read and aio_write, so the remaining	78	files currently, for example), and they would only support aio_read and
63	functionality would have to be implemented using threads anyway.	79	aio_write, so the remaining functionality would have to be implemented
		80	using threads anyway.
64		81
65	Although the module will work with in the presence of other threads,	82	Although the module will work with in the presence of other (Perl-)
66	it is currently not reentrant in any way, so use appropriate locking	83	threads, it is currently not reentrant in any way, so use appropriate
67	yourself, always call C<poll_cb> from within the same thread, or never	84	locking yourself, always call C<poll_cb> from within the same thread, or
68	call C<poll_cb> (or other C<aio_> functions) recursively.	85	never call C<poll_cb> (or other C<aio_> functions) recursively.
		86
		87	=head2 EXAMPLE
		88
		89	This is a simple example that uses the Event module and loads
		90	F</etc/passwd> asynchronously:
		91
		92	use Fcntl;
		93	use Event;
		94	use IO::AIO;
		95
		96	# register the IO::AIO callback with Event
		97	Event->io (fd => IO::AIO::poll_fileno,
		98	poll => 'r',
		99	cb => \&IO::AIO::poll_cb);
		100
		101	# queue the request to open /etc/passwd
		102	aio_open "/etc/passwd", O_RDONLY, 0, sub {
		103	my $fh = $_[0]
		104	or die "error while opening: $!";
		105
		106	# stat'ing filehandles is generally non-blocking
		107	my $size = -s $fh;
		108
		109	# queue a request to read the file
		110	my $contents;
		111	aio_read $fh, 0, $size, $contents, 0, sub {
		112	$_[0] == $size
		113	or die "short read: $!";
		114
		115	close $fh;
		116
		117	# file contents now in $contents
		118	print $contents;
		119
		120	# exit event loop and program
		121	Event::unloop;
		122	};
		123	};
		124
		125	# possibly queue up other requests, or open GUI windows,
		126	# check for sockets etc. etc.
		127
		128	# process events as long as there are some:
		129	Event::loop;
		130
		131	=head1 REQUEST ANATOMY AND LIFETIME
		132
		133	Every C<aio_*> function creates a request. which is a C data structure not
		134	directly visible to Perl.
		135
		136	If called in non-void context, every request function returns a Perl
		137	object representing the request. In void context, nothing is returned,
		138	which saves a bit of memory.
		139
		140	The perl object is a fairly standard ref-to-hash object. The hash contents
		141	are not used by IO::AIO so you are free to store anything you like in it.
		142
		143	During their existance, aio requests travel through the following states,
		144	in order:
		145
		146	=over 4
		147
		148	=item ready
		149
		150	Immediately after a request is created it is put into the ready state,
		151	waiting for a thread to execute it.
		152
		153	=item execute
		154
		155	A thread has accepted the request for processing and is currently
		156	executing it (e.g. blocking in read).
		157
		158	=item pending
		159
		160	The request has been executed and is waiting for result processing.
		161
		162	While request submission and execution is fully asynchronous, result
		163	processing is not and relies on the perl interpreter calling C<poll_cb>
		164	(or another function with the same effect).
		165
		166	=item result
		167
		168	The request results are processed synchronously by C<poll_cb>.
		169
		170	The C<poll_cb> function will process all outstanding aio requests by
		171	calling their callbacks, freeing memory associated with them and managing
		172	any groups they are contained in.
		173
		174	=item done
		175
		176	Request has reached the end of its lifetime and holds no resources anymore
		177	(except possibly for the Perl object, but its connection to the actual
		178	aio request is severed and calling its methods will either do nothing or
		179	result in a runtime error).
		180
		181	=back
69		182
70	=cut	183	=cut
71		184
72	package IO::AIO;	185	package IO::AIO;
73		186
…		…
75	use strict 'vars';	188	use strict 'vars';
76		189
77	use base 'Exporter';	190	use base 'Exporter';
78		191
79	BEGIN {	192	BEGIN {
80	our $VERSION = '2.0';	193	our $VERSION = '2.1';
81		194
82	our @AIO_REQ = qw(aio_sendfile aio_read aio_write aio_open aio_close aio_stat	195	our @AIO_REQ = qw(aio_sendfile aio_read aio_write aio_open aio_close aio_stat
83	aio_lstat aio_unlink aio_rmdir aio_readdir aio_scandir aio_symlink	196	aio_lstat aio_unlink aio_rmdir aio_readdir aio_scandir aio_symlink
84	aio_fsync aio_fdatasync aio_readahead aio_rename aio_link aio_move	197	aio_fsync aio_fdatasync aio_readahead aio_rename aio_link aio_move
85	aio_group aio_nop);	198	aio_copy aio_group aio_nop aio_mknod);
86	our @EXPORT = (@AIO_REQ, qw(aioreq_pri aioreq_nice));	199	our @EXPORT = (@AIO_REQ, qw(aioreq_pri aioreq_nice));
87	our @EXPORT_OK = qw(poll_fileno poll_cb poll_wait flush	200	our @EXPORT_OK = qw(poll_fileno poll_cb poll_wait flush
88	min_parallel max_parallel max_outstanding nreqs);	201	min_parallel max_parallel max_idle
		202	nreqs nready npending nthreads
		203	max_poll_time max_poll_reqs);
89		204
90	@IO::AIO::GRP::ISA = 'IO::AIO::REQ';	205	@IO::AIO::GRP::ISA = 'IO::AIO::REQ';
91		206
92	require XSLoader;	207	require XSLoader;
93	XSLoader::load ("IO::AIO", $VERSION);	208	XSLoader::load ("IO::AIO", $VERSION);
94	}	209	}
95		210
96	=head1 FUNCTIONS	211	=head1 FUNCTIONS
97		212
98	=head2 AIO FUNCTIONS	213	=head2 AIO REQUEST FUNCTIONS
99		214
100	All the C<aio_*> calls are more or less thin wrappers around the syscall	215	All the C<aio_*> calls are more or less thin wrappers around the syscall
101	with the same name (sans C<aio_>). The arguments are similar or identical,	216	with the same name (sans C<aio_>). The arguments are similar or identical,
102	and they all accept an additional (and optional) C<$callback> argument	217	and they all accept an additional (and optional) C<$callback> argument
103	which must be a code reference. This code reference will get called with	218	which must be a code reference. This code reference will get called with
…		…
106	syscall has been executed asynchronously.	221	syscall has been executed asynchronously.
107		222
108	All functions expecting a filehandle keep a copy of the filehandle	223	All functions expecting a filehandle keep a copy of the filehandle
109	internally until the request has finished.	224	internally until the request has finished.
110		225
111	All requests return objects of type L<IO::AIO::REQ> that allow further	226	All functions return request objects of type L<IO::AIO::REQ> that allow
112	manipulation of those requests while they are in-flight.	227	further manipulation of those requests while they are in-flight.
113		228
114	The pathnames you pass to these routines I<must> be absolute and	229	The pathnames you pass to these routines I<must> be absolute and
115	encoded in byte form. The reason for the former is that at the time the	230	encoded as octets. The reason for the former is that at the time the
116	request is being executed, the current working directory could have	231	request is being executed, the current working directory could have
117	changed. Alternatively, you can make sure that you never change the	232	changed. Alternatively, you can make sure that you never change the
118	current working directory.	233	current working directory anywhere in the program and then use relative
		234	paths.
119		235
120	To encode pathnames to byte form, either make sure you either: a)	236	To encode pathnames as octets, either make sure you either: a) always pass
121	always pass in filenames you got from outside (command line, readdir	237	in filenames you got from outside (command line, readdir etc.) without
122	etc.), b) are ASCII or ISO 8859-1, c) use the Encode module and encode	238	tinkering, b) are ASCII or ISO 8859-1, c) use the Encode module and encode
123	your pathnames to the locale (or other) encoding in effect in the user	239	your pathnames to the locale (or other) encoding in effect in the user
124	environment, d) use Glib::filename_from_unicode on unicode filenames or e)	240	environment, d) use Glib::filename_from_unicode on unicode filenames or e)
125	use something else.	241	use something else to ensure your scalar has the correct contents.
		242
		243	This works, btw. independent of the internal UTF-8 bit, which IO::AIO
		244	handles correctly wether it is set or not.
126		245
127	=over 4	246	=over 4
128		247
129	=item aioreq_pri $pri	248	=item $prev_pri = aioreq_pri [$pri]
130		249
131	Sets the priority for the next aio request. The default priority	250	Returns the priority value that would be used for the next request and, if
		251	C<$pri> is given, sets the priority for the next aio request.
		252
132	is C<0>, the minimum and maximum priorities are C<-4> and C<4>,	253	The default priority is C<0>, the minimum and maximum priorities are C<-4>
133	respectively. Requests with higher priority will be serviced first.	254	and C<4>, respectively. Requests with higher priority will be serviced
		255	first.
134		256
135	The priority will be reset to C<0> after each call to one of the C<aio_>	257	The priority will be reset to C<0> after each call to one of the C<aio_*>
136	functions.	258	functions.
137		259
138	Example: open a file with low priority, then read something from it with	260	Example: open a file with low priority, then read something from it with
139	higher priority so the read request is serviced before other low priority	261	higher priority so the read request is serviced before other low priority
140	open requests (potentially spamming the cache):	262	open requests (potentially spamming the cache):
…		…
150	};	272	};
151		273
152	=item aioreq_nice $pri_adjust	274	=item aioreq_nice $pri_adjust
153		275
154	Similar to C<aioreq_pri>, but subtracts the given value from the current	276	Similar to C<aioreq_pri>, but subtracts the given value from the current
155	priority, so effects are cumulative.	277	priority, so the effect is cumulative.
156		278
157	=item aio_open $pathname, $flags, $mode, $callback->($fh)	279	=item aio_open $pathname, $flags, $mode, $callback->($fh)
158		280
159	Asynchronously open or create a file and call the callback with a newly	281	Asynchronously open or create a file and call the callback with a newly
160	created filehandle for the file.	282	created filehandle for the file.
…		…
210		332
211	aio_read $fh, 7, 15, $buffer, 0, sub {	333	aio_read $fh, 7, 15, $buffer, 0, sub {
212	$_[0] > 0 or die "read error: $!";	334	$_[0] > 0 or die "read error: $!";
213	print "read $_[0] bytes: <$buffer>\n";	335	print "read $_[0] bytes: <$buffer>\n";
214	};	336	};
215
216	=item aio_move $srcpath, $dstpath, $callback->($status)
217
218	Try to move the I<file> (directories not supported as either source or
219	destination) from C<$srcpath> to C<$dstpath> and call the callback with
220	the C<0> (error) or C<-1> ok.
221
222	This is a composite request that tries to rename(2) the file first. If
223	rename files with C<EXDEV>, it creates the destination file with mode 0200
224	and copies the contents of the source file into it using C<aio_sendfile>,
225	followed by restoring atime, mtime, access mode and uid/gid, in that
226	order, and unlinking the C<$srcpath>.
227
228	If an error occurs, the partial destination file will be unlinked, if
229	possible, except when setting atime, mtime, access mode and uid/gid, where
230	errors are being ignored.
231
232	=cut
233
234	sub aio_move($$$) {
235	my ($src, $dst, $cb) = @_;
236
237	my $grp = aio_group $cb;
238
239	add $grp aio_rename $src, $dst, sub {
240	if ($_[0] && $! == EXDEV) {
241	add $grp aio_open $src, O_RDONLY, 0, sub {
242	if (my $src_fh = $_[0]) {
243	my @stat = stat $src_fh;
244
245	add $grp aio_open $dst, O_WRONLY, 0200, sub {
246	if (my $dst_fh = $_[0]) {
247	add $grp aio_sendfile $dst_fh, $src_fh, 0, $stat[7], sub {
248	close $src_fh;
249
250	if ($_[0] == $stat[7]) {
251	utime $stat[8], $stat[9], $dst;
252	chmod $stat[2] & 07777, $dst_fh;
253	chown $stat[4], $stat[5], $dst_fh;
254	close $dst_fh;
255
256	add $grp aio_unlink $src, sub {
257	$grp->result ($_[0]);
258	};
259	} else {
260	my $errno = $!;
261	add $grp aio_unlink $dst, sub {
262	$! = $errno;
263	$grp->result (-1);
264	};
265	}
266	};
267	} else {
268	$grp->result (-1);
269	}
270	},
271
272	} else {
273	$grp->result (-1);
274	}
275	};
276	} else {
277	$grp->result ($_[0]);
278	}
279	};
280
281	$grp
282	}
283		337
284	=item aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval)	338	=item aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval)
285		339
286	Tries to copy C<$length> bytes from C<$in_fh> to C<$out_fh>. It starts	340	Tries to copy C<$length> bytes from C<$in_fh> to C<$out_fh>. It starts
287	reading at byte offset C<$in_offset>, and starts writing at the current	341	reading at byte offset C<$in_offset>, and starts writing at the current
…		…
343	=item aio_unlink $pathname, $callback->($status)	397	=item aio_unlink $pathname, $callback->($status)
344		398
345	Asynchronously unlink (delete) a file and call the callback with the	399	Asynchronously unlink (delete) a file and call the callback with the
346	result code.	400	result code.
347		401
		402	=item aio_mknod $path, $mode, $dev, $callback->($status)
		403
		404	[EXPERIMENTAL]
		405
		406	Asynchronously create a device node (or fifo). See mknod(2).
		407
		408	The only (POSIX-) portable way of calling this function is:
		409
		410	aio_mknod $path, IO::AIO::S_IFIFO \| $mode, 0, sub { ...
		411
348	=item aio_link $srcpath, $dstpath, $callback->($status)	412	=item aio_link $srcpath, $dstpath, $callback->($status)
349		413
350	Asynchronously create a new link to the existing object at C<$srcpath> at	414	Asynchronously create a new link to the existing object at C<$srcpath> at
351	the path C<$dstpath> and call the callback with the result code.	415	the path C<$dstpath> and call the callback with the result code.
352		416
…		…
372	sorted, and will B<NOT> include the C<.> and C<..> entries.	436	sorted, and will B<NOT> include the C<.> and C<..> entries.
373		437
374	The callback a single argument which is either C<undef> or an array-ref	438	The callback a single argument which is either C<undef> or an array-ref
375	with the filenames.	439	with the filenames.
376		440
		441	=item aio_copy $srcpath, $dstpath, $callback->($status)
		442
		443	Try to copy the I<file> (directories not supported as either source or
		444	destination) from C<$srcpath> to C<$dstpath> and call the callback with
		445	the C<0> (error) or C<-1> ok.
		446
		447	This is a composite request that it creates the destination file with
		448	mode 0200 and copies the contents of the source file into it using
		449	C<aio_sendfile>, followed by restoring atime, mtime, access mode and
		450	uid/gid, in that order.
		451
		452	If an error occurs, the partial destination file will be unlinked, if
		453	possible, except when setting atime, mtime, access mode and uid/gid, where
		454	errors are being ignored.
		455
		456	=cut
		457
		458	sub aio_copy($$;$) {
		459	my ($src, $dst, $cb) = @_;
		460
		461	my $pri = aioreq_pri;
		462	my $grp = aio_group $cb;
		463
		464	aioreq_pri $pri;
		465	add $grp aio_open $src, O_RDONLY, 0, sub {
		466	if (my $src_fh = $_[0]) {
		467	my @stat = stat $src_fh;
		468
		469	aioreq_pri $pri;
		470	add $grp aio_open $dst, O_CREAT \| O_WRONLY \| O_TRUNC, 0200, sub {
		471	if (my $dst_fh = $_[0]) {
		472	aioreq_pri $pri;
		473	add $grp aio_sendfile $dst_fh, $src_fh, 0, $stat[7], sub {
		474	if ($_[0] == $stat[7]) {
		475	$grp->result (0);
		476	close $src_fh;
		477
		478	# those should not normally block. should. should.
		479	utime $stat[8], $stat[9], $dst;
		480	chmod $stat[2] & 07777, $dst_fh;
		481	chown $stat[4], $stat[5], $dst_fh;
		482	close $dst_fh;
		483	} else {
		484	$grp->result (-1);
		485	close $src_fh;
		486	close $dst_fh;
		487
		488	aioreq $pri;
		489	add $grp aio_unlink $dst;
		490	}
		491	};
		492	} else {
		493	$grp->result (-1);
		494	}
		495	},
		496
		497	} else {
		498	$grp->result (-1);
		499	}
		500	};
		501
		502	$grp
		503	}
		504
		505	=item aio_move $srcpath, $dstpath, $callback->($status)
		506
		507	Try to move the I<file> (directories not supported as either source or
		508	destination) from C<$srcpath> to C<$dstpath> and call the callback with
		509	the C<0> (error) or C<-1> ok.
		510
		511	This is a composite request that tries to rename(2) the file first. If
		512	rename files with C<EXDEV>, it copies the file with C<aio_copy> and, if
		513	that is successful, unlinking the C<$srcpath>.
		514
		515	=cut
		516
		517	sub aio_move($$;$) {
		518	my ($src, $dst, $cb) = @_;
		519
		520	my $pri = aioreq_pri;
		521	my $grp = aio_group $cb;
		522
		523	aioreq_pri $pri;
		524	add $grp aio_rename $src, $dst, sub {
		525	if ($_[0] && $! == EXDEV) {
		526	aioreq_pri $pri;
		527	add $grp aio_copy $src, $dst, sub {
		528	$grp->result ($_[0]);
		529
		530	if (!$_[0]) {
		531	aioreq_pri $pri;
		532	add $grp aio_unlink $src;
		533	}
		534	};
		535	} else {
		536	$grp->result ($_[0]);
		537	}
		538	};
		539
		540	$grp
		541	}
		542
377	=item aio_scandir $path, $maxreq, $callback->($dirs, $nondirs)	543	=item aio_scandir $path, $maxreq, $callback->($dirs, $nondirs)
378		544
379	Scans a directory (similar to C<aio_readdir>) but additionally tries to	545	Scans a directory (similar to C<aio_readdir>) but additionally tries to
380	separate the entries of directory C<$path> into two sets of names, ones	546	efficiently separate the entries of directory C<$path> into two sets of
381	you can recurse into (directories or links to them), and ones you cannot	547	names, directories you can recurse into (directories), and ones you cannot
382	recurse into (everything else).	548	recurse into (everything else, including symlinks to directories).
383		549
384	C<aio_scandir> is a composite request that creates of many sub requests_	550	C<aio_scandir> is a composite request that creates of many sub requests_
385	C<$maxreq> specifies the maximum number of outstanding aio requests that	551	C<$maxreq> specifies the maximum number of outstanding aio requests that
386	this function generates. If it is C<< <= 0 >>, then a suitable default	552	this function generates. If it is C<< <= 0 >>, then a suitable default
387	will be chosen (currently 6).	553	will be chosen (currently 4).
388		554
389	On error, the callback is called without arguments, otherwise it receives	555	On error, the callback is called without arguments, otherwise it receives
390	two array-refs with path-relative entry names.	556	two array-refs with path-relative entry names.
391		557
392	Example:	558	Example:
…		…
429	=cut	595	=cut
430		596
431	sub aio_scandir($$$) {	597	sub aio_scandir($$$) {
432	my ($path, $maxreq, $cb) = @_;	598	my ($path, $maxreq, $cb) = @_;
433		599
		600	my $pri = aioreq_pri;
		601
434	my $grp = aio_group $cb;	602	my $grp = aio_group $cb;
435		603
436	$maxreq = 6 if $maxreq <= 0;	604	$maxreq = 4 if $maxreq <= 0;
437		605
438	# stat once	606	# stat once
		607	aioreq_pri $pri;
439	add $grp aio_stat $path, sub {	608	add $grp aio_stat $path, sub {
440	return $grp->result () if $_[0];	609	return $grp->result () if $_[0];
441	my $now = time;	610	my $now = time;
442	my $hash1 = join ":", (stat _)[0,1,3,7,9];	611	my $hash1 = join ":", (stat _)[0,1,3,7,9];
443		612
444	# read the directory entries	613	# read the directory entries
		614	aioreq_pri $pri;
445	add $grp aio_readdir $path, sub {	615	add $grp aio_readdir $path, sub {
446	my $entries = shift	616	my $entries = shift
447	or return $grp->result ();	617	or return $grp->result ();
448		618
449	# stat the dir another time	619	# stat the dir another time
		620	aioreq_pri $pri;
450	add $grp aio_stat $path, sub {	621	add $grp aio_stat $path, sub {
451	my $hash2 = join ":", (stat _)[0,1,3,7,9];	622	my $hash2 = join ":", (stat _)[0,1,3,7,9];
452		623
453	my $ndirs;	624	my $ndirs;
454		625
…		…
469	map [$_, sprintf "%s%04d", (/.\./ ? "1" : "0"), length],	640	map [$_, sprintf "%s%04d", (/.\./ ? "1" : "0"), length],
470	@$entries];	641	@$entries];
471		642
472	my (@dirs, @nondirs);	643	my (@dirs, @nondirs);
473		644
474	my ($statcb, $schedcb);
475	my $nreq = 0;
476
477	my $statgrp = add $grp aio_group;	645	my $statgrp = add $grp aio_group sub {
		646	$grp->result (\@dirs, \@nondirs);
		647	};
478		648
479	$schedcb = sub {	649	limit $statgrp $maxreq;
480	if (@$entries) {	650	feed $statgrp sub {
481	if ($nreq < $maxreq) {	651	return unless @$entries;
482	my $ent = pop @$entries;	652	my $entry = pop @$entries;
		653
		654	aioreq_pri $pri;
		655	add $statgrp aio_stat "$path/$entry/.", sub {
		656	if ($_[0] < 0) {
		657	push @nondirs, $entry;
		658	} else {
		659	# need to check for real directory
		660	aioreq_pri $pri;
		661	add $statgrp aio_lstat "$path/$entry", sub {
		662	if (-d _) {
		663	push @dirs, $entry;
		664
		665	unless (--$ndirs) {
		666	push @nondirs, @$entries;
		667	feed $statgrp;
		668	}
		669	} else {
		670	push @nondirs, $entry;
		671	}
483	$nreq++;	672	}
484	add $statgrp aio_stat "$path/$ent/.", sub { $statcb->($_[0], $ent) };
485	}	673	}
486	} elsif (!$nreq) {
487	# finished
488	$statgrp->cancel;
489	undef $statcb;
490	undef $schedcb;
491	$grp->result (\@dirs, \@nondirs);
492	}	674	};
493	};	675	};
494	$statcb = sub {
495	my ($status, $entry) = @_;
496
497	if ($status < 0) {
498	$nreq--;
499	push @nondirs, $entry;
500	&$schedcb;
501	} else {
502	# need to check for real directory
503	add $grp aio_lstat "$path/$entry", sub {
504	$nreq--;
505
506	if (-d _) {
507	push @dirs, $entry;
508
509	if (!--$ndirs) {
510	push @nondirs, @$entries;
511	$entries = [];
512	}
513	} else {
514	push @nondirs, $entry;
515	}
516
517	&$schedcb;
518	}
519	}
520	};
521
522	&$schedcb while @$entries && $nreq < $maxreq;
523	};	676	};
524	};	677	};
525	};	678	};
526		679
527	$grp	680	$grp
…		…
539		692
540	If this call isn't available because your OS lacks it or it couldn't be	693	If this call isn't available because your OS lacks it or it couldn't be
541	detected, it will be emulated by calling C<fsync> instead.	694	detected, it will be emulated by calling C<fsync> instead.
542		695
543	=item aio_group $callback->(...)	696	=item aio_group $callback->(...)
544
545	[EXPERIMENTAL]
546		697
547	This is a very special aio request: Instead of doing something, it is a	698	This is a very special aio request: Instead of doing something, it is a
548	container for other aio requests, which is useful if you want to bundle	699	container for other aio requests, which is useful if you want to bundle
549	many requests into a single, composite, request with a definite callback	700	many requests into a single, composite, request with a definite callback
550	and the ability to cancel the whole request with its subrequests.	701	and the ability to cancel the whole request with its subrequests.
…		…
591	=head2 IO::AIO::REQ CLASS	742	=head2 IO::AIO::REQ CLASS
592		743
593	All non-aggregate C<aio_*> functions return an object of this class when	744	All non-aggregate C<aio_*> functions return an object of this class when
594	called in non-void context.	745	called in non-void context.
595		746
596	A request always moves through the following five states in its lifetime,
597	in order: B<ready> (request has been created, but has not been executed
598	yet), B<execute> (request is currently being executed), B<pending>
599	(request has been executed but callback has not been called yet),
600	B<result> (results are being processed synchronously, includes calling the
601	callback) and B<done> (request has reached the end of its lifetime and
602	holds no resources anymore).
603
604	=over 4	747	=over 4
605		748
606	=item cancel $req	749	=item cancel $req
607		750
608	Cancels the request, if possible. Has the effect of skipping execution	751	Cancels the request, if possible. Has the effect of skipping execution
…		…
661	=item * They can also can also be added to other IO::AIO::GRP objects.	804	=item * They can also can also be added to other IO::AIO::GRP objects.
662		805
663	=item * You must not add requests to a group from within the group callback (or	806	=item * You must not add requests to a group from within the group callback (or
664	any later time).	807	any later time).
665		808
666	=item * This does not harmonise well with C<max_outstanding>, so best do
667	not combine C<aio_group> with it. Groups and feeders are recommended for
668	this kind of concurrency-limiting.
669
670	=back	809	=back
671		810
672	Their lifetime, simplified, looks like this: when they are empty, they	811	Their lifetime, simplified, looks like this: when they are empty, they
673	will finish very quickly. If they contain only requests that are in the	812	will finish very quickly. If they contain only requests that are in the
674	C<done> state, they will also finish. Otherwise they will continue to	813	C<done> state, they will also finish. Otherwise they will continue to
…		…
689	be added, including other groups, as long as you do not create circular	828	be added, including other groups, as long as you do not create circular
690	dependencies.	829	dependencies.
691		830
692	Returns all its arguments.	831	Returns all its arguments.
693		832
		833	=item $grp->cancel_subs
		834
		835	Cancel all subrequests and clears any feeder, but not the group request
		836	itself. Useful when you queued a lot of events but got a result early.
		837
694	=item $grp->result (...)	838	=item $grp->result (...)
695		839
696	Set the result value(s) that will be passed to the group callback when all	840	Set the result value(s) that will be passed to the group callback when all
697	subrequests have finished. By default, no argument will be passed.	841	subrequests have finished and set thre groups errno to the current value
		842	of errno (just like calling C<errno> without an error number). By default,
		843	no argument will be passed and errno is zero.
		844
		845	=item $grp->errno ([$errno])
		846
		847	Sets the group errno value to C<$errno>, or the current value of errno
		848	when the argument is missing.
		849
		850	Every aio request has an associated errno value that is restored when
		851	the callback is invoked. This method lets you change this value from its
		852	default (0).
		853
		854	Calling C<result> will also set errno, so make sure you either set C<$!>
		855	before the call to C<result>, or call c<errno> after it.
698		856
699	=item feed $grp $callback->($grp)	857	=item feed $grp $callback->($grp)
700
701	[VERY EXPERIMENTAL]
702		858
703	Sets a feeder/generator on this group: every group can have an attached	859	Sets a feeder/generator on this group: every group can have an attached
704	generator that generates requests if idle. The idea behind this is that,	860	generator that generates requests if idle. The idea behind this is that,
705	although you could just queue as many requests as you want in a group,	861	although you could just queue as many requests as you want in a group,
706	this might starve other requests for a potentially long time. For	862	this might starve other requests for a potentially long time. For
…		…
743		899
744	=back	900	=back
745		901
746	=head2 SUPPORT FUNCTIONS	902	=head2 SUPPORT FUNCTIONS
747		903
		904	=head3 EVENT PROCESSING AND EVENT LOOP INTEGRATION
		905
748	=over 4	906	=over 4
749		907
750	=item $fileno = IO::AIO::poll_fileno	908	=item $fileno = IO::AIO::poll_fileno
751		909
752	Return the I<request result pipe file descriptor>. This filehandle must be	910	Return the I<request result pipe file descriptor>. This filehandle must be
…		…
756		914
757	See C<poll_cb> for an example.	915	See C<poll_cb> for an example.
758		916
759	=item IO::AIO::poll_cb	917	=item IO::AIO::poll_cb
760		918
761	Process all outstanding events on the result pipe. You have to call this	919	Process some outstanding events on the result pipe. You have to call this
762	regularly. Returns the number of events processed. Returns immediately	920	regularly. Returns the number of events processed. Returns immediately
763	when no events are outstanding.	921	when no events are outstanding. The amount of events processed depends on
		922	the settings of C<IO::AIO::max_poll_req> and C<IO::AIO::max_poll_time>.
		923
		924	If not all requests were processed for whatever reason, the filehandle
		925	will still be ready when C<poll_cb> returns.
764		926
765	Example: Install an Event watcher that automatically calls	927	Example: Install an Event watcher that automatically calls
766	IO::AIO::poll_cb with high priority:	928	IO::AIO::poll_cb with high priority:
767		929
768	Event->io (fd => IO::AIO::poll_fileno,	930	Event->io (fd => IO::AIO::poll_fileno,
769	poll => 'r', async => 1,	931	poll => 'r', async => 1,
770	cb => \&IO::AIO::poll_cb);	932	cb => \&IO::AIO::poll_cb);
771		933
		934	=item IO::AIO::max_poll_reqs $nreqs
		935
		936	=item IO::AIO::max_poll_time $seconds
		937
		938	These set the maximum number of requests (default C<0>, meaning infinity)
		939	that are being processed by C<IO::AIO::poll_cb> in one call, respectively
		940	the maximum amount of time (default C<0>, meaning infinity) spent in
		941	C<IO::AIO::poll_cb> to process requests (more correctly the mininum amount
		942	of time C<poll_cb> is allowed to use).
		943
		944	Setting these is useful if you want to ensure some level of
		945	interactiveness when perl is not fast enough to process all requests in
		946	time.
		947
		948	For interactive programs, values such as C<0.01> to C<0.1> should be fine.
		949
		950	Example: Install an Event watcher that automatically calls
		951	IO::AIO::poll_some with low priority, to ensure that other parts of the
		952	program get the CPU sometimes even under high AIO load.
		953
		954	# try not to spend much more than 0.1s in poll_cb
		955	IO::AIO::max_poll_time 0.1;
		956
		957	# use a low priority so other tasks have priority
		958	Event->io (fd => IO::AIO::poll_fileno,
		959	poll => 'r', nice => 1,
		960	cb => &IO::AIO::poll_cb);
		961
772	=item IO::AIO::poll_wait	962	=item IO::AIO::poll_wait
773		963
774	Wait till the result filehandle becomes ready for reading (simply does a	964	Wait till the result filehandle becomes ready for reading (simply does a
775	C<select> on the filehandle. This is useful if you want to synchronously wait	965	C<select> on the filehandle. This is useful if you want to synchronously
776	for some requests to finish).	966	wait for some requests to finish).
777		967
778	See C<nreqs> for an example.	968	See C<nreqs> for an example.
779		969
		970	=item IO::AIO::poll
		971
		972	Waits until some requests have been handled.
		973
		974	Strictly equivalent to:
		975
		976	IO::AIO::poll_wait, IO::AIO::poll_cb
		977	if IO::AIO::nreqs;
		978
780	=item IO::AIO::nreqs	979	=item IO::AIO::flush
781		980
782	Returns the number of requests currently outstanding (i.e. for which their	981	Wait till all outstanding AIO requests have been handled.
783	callback has not been invoked yet).
784		982
785	Example: wait till there are no outstanding requests anymore:	983	Strictly equivalent to:
786		984
787	IO::AIO::poll_wait, IO::AIO::poll_cb	985	IO::AIO::poll_wait, IO::AIO::poll_cb
788	while IO::AIO::nreqs;	986	while IO::AIO::nreqs;
789		987
790	=item IO::AIO::flush	988	=head3 CONTROLLING THE NUMBER OF THREADS
791
792	Wait till all outstanding AIO requests have been handled.
793
794	Strictly equivalent to:
795
796	IO::AIO::poll_wait, IO::AIO::poll_cb
797	while IO::AIO::nreqs;
798
799	=item IO::AIO::poll
800
801	Waits until some requests have been handled.
802
803	Strictly equivalent to:
804
805	IO::AIO::poll_wait, IO::AIO::poll_cb
806	if IO::AIO::nreqs;
807		989
808	=item IO::AIO::min_parallel $nthreads	990	=item IO::AIO::min_parallel $nthreads
809		991
810	Set the minimum number of AIO threads to C<$nthreads>. The current	992	Set the minimum number of AIO threads to C<$nthreads>. The current
811	default is C<8>, which means eight asynchronous operations can execute	993	default is C<8>, which means eight asynchronous operations can execute
812	concurrently at any one time (the number of outstanding requests,	994	concurrently at any one time (the number of outstanding requests,
813	however, is unlimited).	995	however, is unlimited).
814		996
815	IO::AIO starts threads only on demand, when an AIO request is queued and	997	IO::AIO starts threads only on demand, when an AIO request is queued and
816	no free thread exists.	998	no free thread exists. Please note that queueing up a hundred requests can
		999	create demand for a hundred threads, even if it turns out that everything
		1000	is in the cache and could have been processed faster by a single thread.
817		1001
818	It is recommended to keep the number of threads relatively low, as some	1002	It is recommended to keep the number of threads relatively low, as some
819	Linux kernel versions will scale negatively with the number of threads	1003	Linux kernel versions will scale negatively with the number of threads
820	(higher parallelity => MUCH higher latency). With current Linux 2.6	1004	(higher parallelity => MUCH higher latency). With current Linux 2.6
821	versions, 4-32 threads should be fine.	1005	versions, 4-32 threads should be fine.
…		…
835	This module automatically runs C<max_parallel 0> at program end, to ensure	1019	This module automatically runs C<max_parallel 0> at program end, to ensure
836	that all threads are killed and that there are no outstanding requests.	1020	that all threads are killed and that there are no outstanding requests.
837		1021
838	Under normal circumstances you don't need to call this function.	1022	Under normal circumstances you don't need to call this function.
839		1023
		1024	=item IO::AIO::max_idle $nthreads
		1025
		1026	Limit the number of threads (default: 4) that are allowed to idle (i.e.,
		1027	threads that did not get a request to process within 10 seconds). That
		1028	means if a thread becomes idle while C<$nthreads> other threads are also
		1029	idle, it will free its resources and exit.
		1030
		1031	This is useful when you allow a large number of threads (e.g. 100 or 1000)
		1032	to allow for extremely high load situations, but want to free resources
		1033	under normal circumstances (1000 threads can easily consume 30MB of RAM).
		1034
		1035	The default is probably ok in most situations, especially if thread
		1036	creation is fast. If thread creation is very slow on your system you might
		1037	want to use larger values.
		1038
840	=item $oldnreqs = IO::AIO::max_outstanding $nreqs	1039	=item $oldmaxreqs = IO::AIO::max_outstanding $maxreqs
841		1040
842	[DEPRECATED]	1041	This is a very bad function to use in interactive programs because it
		1042	blocks, and a bad way to reduce concurrency because it is inexact: Better
		1043	use an C<aio_group> together with a feed callback.
843		1044
844	Sets the maximum number of outstanding requests to C<$nreqs>. If you	1045	Sets the maximum number of outstanding requests to C<$nreqs>. If you
845	try to queue up more than this number of requests, the caller will block until	1046	to queue up more than this number of requests, the next call to the
846	some requests have been handled.	1047	C<poll_cb> (and C<poll_some> and other functions calling C<poll_cb>)
		1048	function will block until the limit is no longer exceeded.
847		1049
848	The default is very large, so normally there is no practical limit. If you	1050	The default value is very large, so there is no practical limit on the
849	queue up many requests in a loop it often improves speed if you set	1051	number of outstanding requests.
850	this to a relatively low number, such as C<100>.
851		1052
852	This function does not work well together with C<aio_group>'s, and their	1053	You can still queue as many requests as you want. Therefore,
853	feeder interface is better suited to limiting concurrency, so do not use	1054	C<max_oustsanding> is mainly useful in simple scripts (with low values) or
854	this function.	1055	as a stop gap to shield against fatal memory overflow (with large values).
855		1056
856	Under normal circumstances you don't need to call this function.	1057	=head3 STATISTICAL INFORMATION
		1058
		1059	=item IO::AIO::nreqs
		1060
		1061	Returns the number of requests currently in the ready, execute or pending
		1062	states (i.e. for which their callback has not been invoked yet).
		1063
		1064	Example: wait till there are no outstanding requests anymore:
		1065
		1066	IO::AIO::poll_wait, IO::AIO::poll_cb
		1067	while IO::AIO::nreqs;
		1068
		1069	=item IO::AIO::nready
		1070
		1071	Returns the number of requests currently in the ready state (not yet
		1072	executed).
		1073
		1074	=item IO::AIO::npending
		1075
		1076	Returns the number of requests currently in the pending state (executed,
		1077	but not yet processed by poll_cb).
857		1078
858	=back	1079	=back
859		1080
860	=cut	1081	=cut
861		1082
…		…
876	}	1097	}
877		1098
878	min_parallel 8;	1099	min_parallel 8;
879		1100
880	END {	1101	END {
881	max_parallel 0;	1102	min_parallel 1;
882	}	1103	flush;
		1104	};
883		1105
884	1;	1106	1;
885		1107
886	=head2 FORK BEHAVIOUR	1108	=head2 FORK BEHAVIOUR
887		1109
888	This module should do "the right thing" when the process using it forks:	1110	This module should do "the right thing" when the process using it forks:
889		1111
890	Before the fork, IO::AIO enters a quiescent state where no requests	1112	Before the fork, IO::AIO enters a quiescent state where no requests
891	can be added in other threads and no results will be processed. After	1113	can be added in other threads and no results will be processed. After
892	the fork the parent simply leaves the quiescent state and continues	1114	the fork the parent simply leaves the quiescent state and continues
893	request/result processing, while the child clears the request/result	1115	request/result processing, while the child frees the request/result queue
894	queue (so the requests started before the fork will only be handled in	1116	(so that the requests started before the fork will only be handled in the
895	the parent). Threads will be started on demand until the limit ste in the	1117	parent). Threads will be started on demand until the limit set in the
896	parent process has been reached again.	1118	parent process has been reached again.
897		1119
898	In short: the parent will, after a short pause, continue as if fork had	1120	In short: the parent will, after a short pause, continue as if fork had
899	not been called, while the child will act as if IO::AIO has not been used	1121	not been called, while the child will act as if IO::AIO has not been used
900	yet.	1122	yet.
901		1123
902	=head2 MEMORY USAGE	1124	=head2 MEMORY USAGE
903		1125
		1126	Per-request usage:
		1127
904	Each aio request uses - depending on your architecture - around 128 bytes	1128	Each aio request uses - depending on your architecture - around 100-200
905	of memory. In addition, stat requests need a stat buffer (possibly a few	1129	bytes of memory. In addition, stat requests need a stat buffer (possibly
906	hundred bytes). Perl scalars and other data passed into aio requests will	1130	a few hundred bytes), readdir requires a result buffer and so on. Perl
907	also be locked.	1131	scalars and other data passed into aio requests will also be locked and
		1132	will consume memory till the request has entered the done state.
908		1133
909	This is now awfully much, so queuing lots of requests is not usually a	1134	This is now awfully much, so queuing lots of requests is not usually a
910	problem.	1135	problem.
911		1136
912	Each thread needs a stack area which is usually around 16k, sometimes much	1137	Per-thread usage:
913	larger, depending on the OS.	1138
		1139	In the execution phase, some aio requests require more memory for
		1140	temporary buffers, and each thread requires a stack and other data
		1141	structures (usually around 16k-128k, depending on the OS).
		1142
		1143	=head1 KNOWN BUGS
		1144
		1145	Known bugs will be fixed in the next release.
914		1146
915	=head1 SEE ALSO	1147	=head1 SEE ALSO
916		1148
917	L<Coro::AIO>.	1149	L<Coro::AIO>.
918		1150

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing IO-AIO/AIO.pm (file contents): Revision 1.71 by root, Tue Oct 24 11:57:30 2006 UTC vs. Revision 1.88 by root, Sun Oct 29 01:50:29 2006 UTC

Diff Legend

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.71 by root, Tue Oct 24 11:57:30 2006 UTC vs.
Revision 1.88 by root, Sun Oct 29 01:50:29 2006 UTC