ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/IO-AIO/AIO.pm

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.113 by root, Thu Sep 20 14:06:21 2007 UTC vs.
Revision 1.202 by root, Tue Jul 5 14:02:15 2011 UTC

…		…
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	use IO::AIO;	7	use IO::AIO;
8		8
9	aio_open "/etc/passwd", O_RDONLY, 0, sub {	9	aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub {
10	my $fh = shift	10	my $fh = shift
11	or die "/etc/passwd: $!";	11	or die "/etc/passwd: $!";
12	...	12	...
13	};	13	};
14		14
…		…
26	$req->cancel; # cancel request if still in queue	26	$req->cancel; # cancel request if still in queue
27		27
28	my $grp = aio_group sub { print "all stats done\n" };	28	my $grp = aio_group sub { print "all stats done\n" };
29	add $grp aio_stat "..." for ...;	29	add $grp aio_stat "..." for ...;
30		30
31	# AnyEvent integration
32	open my $fh, "<&=" . IO::AIO::poll_fileno or die "$!";
33	my $w = AnyEvent->io (fh => $fh, poll => 'r', cb => sub { IO::AIO::poll_cb });
34
35	# Event integration
36	Event->io (fd => IO::AIO::poll_fileno,
37	poll => 'r',
38	cb => \&IO::AIO::poll_cb);
39
40	# Glib/Gtk2 integration
41	add_watch Glib::IO IO::AIO::poll_fileno,
42	in => sub { IO::AIO::poll_cb; 1 };
43
44	# Tk integration
45	Tk::Event::IO->fileevent (IO::AIO::poll_fileno, "",
46	readable => \&IO::AIO::poll_cb);
47
48	# Danga::Socket integration
49	Danga::Socket->AddOtherFds (IO::AIO::poll_fileno =>
50	\&IO::AIO::poll_cb);
51
52	=head1 DESCRIPTION	31	=head1 DESCRIPTION
53		32
54	This module implements asynchronous I/O using whatever means your	33	This module implements asynchronous I/O using whatever means your
55	operating system supports.	34	operating system supports. It is implemented as an interface to C<libeio>
		35	(L<http://software.schmorp.de/pkg/libeio.html>).
56		36
57	Asynchronous means that operations that can normally block your program	37	Asynchronous means that operations that can normally block your program
58	(e.g. reading from disk) will be done asynchronously: the operation	38	(e.g. reading from disk) will be done asynchronously: the operation
59	will still block, but you can do something else in the meantime. This	39	will still block, but you can do something else in the meantime. This
60	is extremely useful for programs that need to stay interactive even	40	is extremely useful for programs that need to stay interactive even
…		…
64	on a RAID volume or over NFS when you do a number of stat operations	44	on a RAID volume or over NFS when you do a number of stat operations
65	concurrently.	45	concurrently.
66		46
67	While most of this works on all types of file descriptors (for	47	While most of this works on all types of file descriptors (for
68	example sockets), using these functions on file descriptors that	48	example sockets), using these functions on file descriptors that
69	support nonblocking operation (again, sockets, pipes etc.) is very	49	support nonblocking operation (again, sockets, pipes etc.) is
70	inefficient. Use an event loop for that (such as the L<Event|Event>	50	very inefficient. Use an event loop for that (such as the L<EV>
71	module): IO::AIO will naturally fit into such an event loop itself.	51	module): IO::AIO will naturally fit into such an event loop itself.
72		52
73	In this version, a number of threads are started that execute your	53	In this version, a number of threads are started that execute your
74	requests and signal their completion. You don't need thread support	54	requests and signal their completion. You don't need thread support
75	in perl, and the threads created by this module will not be visible	55	in perl, and the threads created by this module will not be visible
…		…
85	yourself, always call C<poll_cb> from within the same thread, or never	65	yourself, always call C<poll_cb> from within the same thread, or never
86	call C<poll_cb> (or other C<aio_> functions) recursively.	66	call C<poll_cb> (or other C<aio_> functions) recursively.
87		67
88	=head2 EXAMPLE	68	=head2 EXAMPLE
89		69
90	This is a simple example that uses the Event module and loads	70	This is a simple example that uses the EV module and loads
91	F</etc/passwd> asynchronously:	71	F</etc/passwd> asynchronously:
92		72
93	use Fcntl;	73	use Fcntl;
94	use Event;	74	use EV;
95	use IO::AIO;	75	use IO::AIO;
96		76
97	# register the IO::AIO callback with Event	77	# register the IO::AIO callback with EV
98	Event->io (fd => IO::AIO::poll_fileno,	78	my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
99	poll => 'r',
100	cb => \&IO::AIO::poll_cb);
101		79
102	# queue the request to open /etc/passwd	80	# queue the request to open /etc/passwd
103	aio_open "/etc/passwd", O_RDONLY, 0, sub {	81	aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub {
104	my $fh = shift	82	my $fh = shift
105	or die "error while opening: $!";	83	or die "error while opening: $!";
106		84
107	# stat'ing filehandles is generally non-blocking	85	# stat'ing filehandles is generally non-blocking
108	my $size = -s $fh;	86	my $size = -s $fh;
…		…
117		95
118	# file contents now in $contents	96	# file contents now in $contents
119	print $contents;	97	print $contents;
120		98
121	# exit event loop and program	99	# exit event loop and program
122	Event::unloop;	100	EV::unloop;
123	};	101	};
124	};	102	};
125		103
126	# possibly queue up other requests, or open GUI windows,	104	# possibly queue up other requests, or open GUI windows,
127	# check for sockets etc. etc.	105	# check for sockets etc. etc.
128		106
129	# process events as long as there are some:	107	# process events as long as there are some:
130	Event::loop;	108	EV::loop;
131		109
132	=head1 REQUEST ANATOMY AND LIFETIME	110	=head1 REQUEST ANATOMY AND LIFETIME
133		111
134	Every C<aio_*> function creates a request. which is a C data structure not	112	Every C<aio_*> function creates a request. which is a C data structure not
135	directly visible to Perl.	113	directly visible to Perl.
…		…
183		161
184	=cut	162	=cut
185		163
186	package IO::AIO;	164	package IO::AIO;
187		165
188	no warnings;	166	use Carp ();
189	use strict 'vars';	167
		168	use common::sense;
190		169
191	use base 'Exporter';	170	use base 'Exporter';
192		171
193	BEGIN {	172	BEGIN {
194	our $VERSION = '2.4';	173	our $VERSION = '3.93';
195		174
196	our @AIO_REQ = qw(aio_sendfile aio_read aio_write aio_open aio_close aio_stat	175	our @AIO_REQ = qw(aio_sendfile aio_read aio_write aio_open aio_close
197	aio_lstat aio_unlink aio_rmdir aio_readdir aio_scandir aio_symlink	176	aio_stat aio_lstat aio_unlink aio_rmdir aio_readdir aio_readdirx
198	aio_readlink aio_fsync aio_fdatasync aio_readahead aio_rename aio_link	177	aio_scandir aio_symlink aio_readlink aio_realpath aio_sync aio_fsync
		178	aio_fdatasync aio_sync_file_range aio_pathsync aio_readahead
		179	aio_rename aio_link aio_move aio_copy aio_group
199	aio_move aio_copy aio_group aio_nop aio_mknod aio_load aio_rmtree aio_mkdir	180	aio_nop aio_mknod aio_load aio_rmtree aio_mkdir aio_chown
200	aio_chown aio_chmod aio_utime aio_truncate);	181	aio_chmod aio_utime aio_truncate
		182	aio_msync aio_mtouch aio_mlock aio_mlockall
		183	aio_statvfs);
		184
201	our @EXPORT = (@AIO_REQ, qw(aioreq_pri aioreq_nice aio_block));	185	our @EXPORT = (@AIO_REQ, qw(aioreq_pri aioreq_nice));
202	our @EXPORT_OK = qw(poll_fileno poll_cb poll_wait flush	186	our @EXPORT_OK = qw(poll_fileno poll_cb poll_wait flush
203	min_parallel max_parallel max_idle	187	min_parallel max_parallel max_idle idle_timeout
204	nreqs nready npending nthreads	188	nreqs nready npending nthreads
205	max_poll_time max_poll_reqs);	189	max_poll_time max_poll_reqs
		190	sendfile fadvise madvise
		191	mmap munmap munlock munlockall);
		192
		193	push @AIO_REQ, qw(aio_busy); # not exported
206		194
207	@IO::AIO::GRP::ISA = 'IO::AIO::REQ';	195	@IO::AIO::GRP::ISA = 'IO::AIO::REQ';
208		196
209	require XSLoader;	197	require XSLoader;
210	XSLoader::load ("IO::AIO", $VERSION);	198	XSLoader::load ("IO::AIO", $VERSION);
211	}	199	}
212		200
213	=head1 FUNCTIONS	201	=head1 FUNCTIONS
		202
		203	=head2 QUICK OVERVIEW
		204
		205	This section simply lists the prototypes of the most important functions
		206	for quick reference. See the following sections for function-by-function
		207	documentation.
		208
		209	aio_open $pathname, $flags, $mode, $callback->($fh)
		210	aio_close $fh, $callback->($status)
		211	aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
		212	aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
		213	aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval)
		214	aio_readahead $fh,$offset,$length, $callback->($retval)
		215	aio_stat $fh_or_path, $callback->($status)
		216	aio_lstat $fh, $callback->($status)
		217	aio_statvfs $fh_or_path, $callback->($statvfs)
		218	aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
		219	aio_chown $fh_or_path, $uid, $gid, $callback->($status)
		220	aio_truncate $fh_or_path, $offset, $callback->($status)
		221	aio_chmod $fh_or_path, $mode, $callback->($status)
		222	aio_unlink $pathname, $callback->($status)
		223	aio_mknod $path, $mode, $dev, $callback->($status)
		224	aio_link $srcpath, $dstpath, $callback->($status)
		225	aio_symlink $srcpath, $dstpath, $callback->($status)
		226	aio_readlink $path, $callback->($link)
		227	aio_realpath $path, $callback->($link)
		228	aio_rename $srcpath, $dstpath, $callback->($status)
		229	aio_mkdir $pathname, $mode, $callback->($status)
		230	aio_rmdir $pathname, $callback->($status)
		231	aio_readdir $pathname, $callback->($entries)
		232	aio_readdirx $pathname, $flags, $callback->($entries, $flags)
		233	IO::AIO::READDIR_DENTS IO::AIO::READDIR_DIRS_FIRST
		234	IO::AIO::READDIR_STAT_ORDER IO::AIO::READDIR_FOUND_UNKNOWN
		235	aio_load $path, $data, $callback->($status)
		236	aio_copy $srcpath, $dstpath, $callback->($status)
		237	aio_move $srcpath, $dstpath, $callback->($status)
		238	aio_scandir $path, $maxreq, $callback->($dirs, $nondirs)
		239	aio_rmtree $path, $callback->($status)
		240	aio_sync $callback->($status)
		241	aio_fsync $fh, $callback->($status)
		242	aio_fdatasync $fh, $callback->($status)
		243	aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)
		244	aio_pathsync $path, $callback->($status)
		245	aio_msync $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
		246	aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
		247	aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
		248	aio_mlockall $flags, $callback->($status)
		249	aio_group $callback->(...)
		250	aio_nop $callback->()
		251
		252	$prev_pri = aioreq_pri [$pri]
		253	aioreq_nice $pri_adjust
		254
		255	IO::AIO::poll_wait
		256	IO::AIO::poll_cb
		257	IO::AIO::poll
		258	IO::AIO::flush
		259	IO::AIO::max_poll_reqs $nreqs
		260	IO::AIO::max_poll_time $seconds
		261	IO::AIO::min_parallel $nthreads
		262	IO::AIO::max_parallel $nthreads
		263	IO::AIO::max_idle $nthreads
		264	IO::AIO::idle_timeout $seconds
		265	IO::AIO::max_outstanding $maxreqs
		266	IO::AIO::nreqs
		267	IO::AIO::nready
		268	IO::AIO::npending
		269
		270	IO::AIO::sendfile $ofh, $ifh, $offset, $count
		271	IO::AIO::fadvise $fh, $offset, $len, $advice
		272	IO::AIO::madvise $scalar, $offset, $length, $advice
		273	IO::AIO::mprotect $scalar, $offset, $length, $protect
		274	IO::AIO::munlock $scalar, $offset = 0, $length = undef
		275	IO::AIO::munlockall
214		276
215	=head2 AIO REQUEST FUNCTIONS	277	=head2 AIO REQUEST FUNCTIONS
216		278
217	All the C<aio_*> calls are more or less thin wrappers around the syscall	279	All the C<aio_*> calls are more or less thin wrappers around the syscall
218	with the same name (sans C<aio_>). The arguments are similar or identical,	280	with the same name (sans C<aio_>). The arguments are similar or identical,
219	and they all accept an additional (and optional) C<$callback> argument	281	and they all accept an additional (and optional) C<$callback> argument
220	which must be a code reference. This code reference will get called with	282	which must be a code reference. This code reference will get called with
221	the syscall return code (e.g. most syscalls return C<-1> on error, unlike	283	the syscall return code (e.g. most syscalls return C<-1> on error, unlike
222	perl, which usually delivers "false") as it's sole argument when the given	284	perl, which usually delivers "false") as its sole argument after the given
223	syscall has been executed asynchronously.	285	syscall has been executed asynchronously.
224		286
225	All functions expecting a filehandle keep a copy of the filehandle	287	All functions expecting a filehandle keep a copy of the filehandle
226	internally until the request has finished.	288	internally until the request has finished.
227		289
…		…
241	your pathnames to the locale (or other) encoding in effect in the user	303	your pathnames to the locale (or other) encoding in effect in the user
242	environment, d) use Glib::filename_from_unicode on unicode filenames or e)	304	environment, d) use Glib::filename_from_unicode on unicode filenames or e)
243	use something else to ensure your scalar has the correct contents.	305	use something else to ensure your scalar has the correct contents.
244		306
245	This works, btw. independent of the internal UTF-8 bit, which IO::AIO	307	This works, btw. independent of the internal UTF-8 bit, which IO::AIO
246	handles correctly wether it is set or not.	308	handles correctly whether it is set or not.
247		309
248	=over 4	310	=over 4
249		311
250	=item $prev_pri = aioreq_pri [$pri]	312	=item $prev_pri = aioreq_pri [$pri]
251		313
…		…
298	by the umask in effect then the request is being executed, so better never	360	by the umask in effect then the request is being executed, so better never
299	change the umask.	361	change the umask.
300		362
301	Example:	363	Example:
302		364
303	aio_open "/etc/passwd", O_RDONLY, 0, sub {	365	aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub {
304	if ($_[0]) {	366	if ($_[0]) {
305	print "open successful, fh is $_[0]\n";	367	print "open successful, fh is $_[0]\n";
306	...	368	...
307	} else {	369	} else {
308	die "open failed: $!\n";	370	die "open failed: $!\n";
309	}	371	}
310	};	372	};
311		373
		374	In addition to all the common open modes/flags (C<O_RDONLY>, C<O_WRONLY>,
		375	C<O_RDWR>, C<O_CREAT>, C<O_TRUNC>, C<O_EXCL> and C<O_APPEND>), the
		376	following POSIX and non-POSIX constants are available (missing ones on
		377	your system are, as usual, C<0>):
		378
		379	C<O_ASYNC>, C<O_DIRECT>, C<O_NOATIME>, C<O_CLOEXEC>, C<O_NOCTTY>, C<O_NOFOLLOW>,
		380	C<O_NONBLOCK>, C<O_EXEC>, C<O_SEARCH>, C<O_DIRECTORY>, C<O_DSYNC>,
		381	C<O_RSYNC>, C<O_SYNC> and C<O_TTY_INIT>.
		382
312		383
313	=item aio_close $fh, $callback->($status)	384	=item aio_close $fh, $callback->($status)
314		385
315	Asynchronously close a file and call the callback with the result	386	Asynchronously close a file and call the callback with the result
316	code. I<WARNING:> although accepted, you should not pass in a perl	387	code.
317	filehandle here, as perl will likely close the file descriptor another
318	time when the filehandle is destroyed. Normally, you can safely call perls
319	C<close> or just let filehandles go out of scope.
320		388
321	This is supposed to be a bug in the API, so that might change. It's	389	Unfortunately, you can't do this to perl. Perl I<insists> very strongly on
322	therefore best to avoid this function.	390	closing the file descriptor associated with the filehandle itself.
323		391
		392	Therefore, C<aio_close> will not close the filehandle - instead it will
		393	use dup2 to overwrite the file descriptor with the write-end of a pipe
		394	(the pipe fd will be created on demand and will be cached).
		395
		396	Or in other words: the file descriptor will be closed, but it will not be
		397	free for reuse until the perl filehandle is closed.
		398
		399	=cut
324		400
325	=item aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)	401	=item aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
326		402
327	=item aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)	403	=item aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
328		404
329	Reads or writes C<$length> bytes from the specified C<$fh> and C<$offset>	405	Reads or writes C<$length> bytes from or to the specified C<$fh> and
330	into the scalar given by C<$data> and offset C<$dataoffset> and calls the	406	C<$offset> into the scalar given by C<$data> and offset C<$dataoffset>
331	callback without the actual number of bytes read (or -1 on error, just	407	and calls the callback without the actual number of bytes read (or -1 on
332	like the syscall).	408	error, just like the syscall).
		409
		410	C<aio_read> will, like C<sysread>, shrink or grow the C<$data> scalar to
		411	offset plus the actual number of bytes read.
333		412
334	If C<$offset> is undefined, then the current file descriptor offset will	413	If C<$offset> is undefined, then the current file descriptor offset will
335	be used (and updated), otherwise the file descriptor offset will not be	414	be used (and updated), otherwise the file descriptor offset will not be
336	changed by these calls.	415	changed by these calls.
337		416
338	If C<$length> is undefined in C<aio_write>, use the remaining length of C<$data>.	417	If C<$length> is undefined in C<aio_write>, use the remaining length of
		418	C<$data>.
339		419
340	If C<$dataoffset> is less than zero, it will be counted from the end of	420	If C<$dataoffset> is less than zero, it will be counted from the end of
341	C<$data>.	421	C<$data>.
342		422
343	The C<$data> scalar I<MUST NOT> be modified in any way while the request	423	The C<$data> scalar I<MUST NOT> be modified in any way while the request
…		…
357		437
358	Tries to copy C<$length> bytes from C<$in_fh> to C<$out_fh>. It starts	438	Tries to copy C<$length> bytes from C<$in_fh> to C<$out_fh>. It starts
359	reading at byte offset C<$in_offset>, and starts writing at the current	439	reading at byte offset C<$in_offset>, and starts writing at the current
360	file offset of C<$out_fh>. Because of that, it is not safe to issue more	440	file offset of C<$out_fh>. Because of that, it is not safe to issue more
361	than one C<aio_sendfile> per C<$out_fh>, as they will interfere with each	441	than one C<aio_sendfile> per C<$out_fh>, as they will interfere with each
362	other.	442	other. The same C<$in_fh> works fine though, as this function does not
		443	move or use the file offset of C<$in_fh>.
363		444
		445	Please note that C<aio_sendfile> can read more bytes from C<$in_fh> than
		446	are written, and there is no way to find out how many more bytes have been
		447	read from C<aio_sendfile> alone, as C<aio_sendfile> only provides the
		448	number of bytes written to C<$out_fh>. Only if the result value equals
		449	C<$length> one can assume that C<$length> bytes have been read.
		450
		451	Unlike with other C<aio_> functions, it makes a lot of sense to use
		452	C<aio_sendfile> on non-blocking sockets, as long as one end (typically
		453	the C<$in_fh>) is a file - the file I/O will then be asynchronous, while
		454	the socket I/O will be non-blocking. Note, however, that you can run
		455	into a trap where C<aio_sendfile> reads some data with readahead, then
		456	fails to write all data, and when the socket is ready the next time, the
		457	data in the cache is already lost, forcing C<aio_sendfile> to again hit
		458	the disk. Explicit C<aio_read> + C<aio_write> let's you better control
		459	resource usage.
		460
364	This call tries to make use of a native C<sendfile> syscall to provide	461	This call tries to make use of a native C<sendfile>-like syscall to
365	zero-copy operation. For this to work, C<$out_fh> should refer to a	462	provide zero-copy operation. For this to work, C<$out_fh> should refer to
366	socket, and C<$in_fh> should refer to mmap'able file.	463	a socket, and C<$in_fh> should refer to an mmap'able file.
367		464
368	If the native sendfile call fails or is not implemented, it will be	465	If a native sendfile cannot be found or it fails with C<ENOSYS>,
369	emulated, so you can call C<aio_sendfile> on any type of filehandle	466	C<EINVAL>, C<ENOTSUP>, C<EOPNOTSUPP>, C<EAFNOSUPPORT>, C<EPROTOTYPE> or
		467	C<ENOTSOCK>, it will be emulated, so you can call C<aio_sendfile> on any
370	regardless of the limitations of the operating system.	468	type of filehandle regardless of the limitations of the operating system.
371		469
372	Please note, however, that C<aio_sendfile> can read more bytes from	470	As native sendfile syscalls (as practically any non-POSIX interface hacked
373	C<$in_fh> than are written, and there is no way to find out how many	471	together in a hurry to improve benchmark numbers) tend to be rather buggy
374	bytes have been read from C<aio_sendfile> alone, as C<aio_sendfile> only	472	on many systems, this implementation tries to work around some known bugs
375	provides the number of bytes written to C<$out_fh>. Only if the result	473	in Linux and FreeBSD kernels (probably others, too), but that might fail,
376	value equals C<$length> one can assume that C<$length> bytes have been	474	so you really really should check the return value of C<aio_sendfile> -
377	read.	475	fewre bytes than expected might have been transferred.
378		476
379		477
380	=item aio_readahead $fh,$offset,$length, $callback->($retval)	478	=item aio_readahead $fh,$offset,$length, $callback->($retval)
381		479
382	C<aio_readahead> populates the page cache with data from a file so that	480	C<aio_readahead> populates the page cache with data from a file so that
…		…
405		503
406	Currently, the stats are always 64-bit-stats, i.e. instead of returning an	504	Currently, the stats are always 64-bit-stats, i.e. instead of returning an
407	error when stat'ing a large file, the results will be silently truncated	505	error when stat'ing a large file, the results will be silently truncated
408	unless perl itself is compiled with large file support.	506	unless perl itself is compiled with large file support.
409		507
		508	To help interpret the mode and dev/rdev stat values, IO::AIO offers the
		509	following constants and functions (if not implemented, the constants will
		510	be C<0> and the functions will either C<croak> or fall back on traditional
		511	behaviour).
		512
		513	C<S_IFMT>, C<S_IFIFO>, C<S_IFCHR>, C<S_IFBLK>, C<S_IFLNK>, C<S_IFREG>,
		514	C<S_IFDIR>, C<S_IFWHT>, C<S_IFSOCK>, C<IO::AIO::major $dev_t>,
		515	C<IO::AIO::minor $dev_t>, C<IO::AIO::makedev $major, $minor>.
		516
410	Example: Print the length of F</etc/passwd>:	517	Example: Print the length of F</etc/passwd>:
411		518
412	aio_stat "/etc/passwd", sub {	519	aio_stat "/etc/passwd", sub {
413	$_[0] and die "stat failed: $!";	520	$_[0] and die "stat failed: $!";
414	print "size is ", -s _, "\n";	521	print "size is ", -s _, "\n";
415	};	522	};
416		523
417		524
		525	=item aio_statvfs $fh_or_path, $callback->($statvfs)
		526
		527	Works like the POSIX C<statvfs> or C<fstatvfs> syscalls, depending on
		528	whether a file handle or path was passed.
		529
		530	On success, the callback is passed a hash reference with the following
		531	members: C<bsize>, C<frsize>, C<blocks>, C<bfree>, C<bavail>, C<files>,
		532	C<ffree>, C<favail>, C<fsid>, C<flag> and C<namemax>. On failure, C<undef>
		533	is passed.
		534
		535	The following POSIX IO::AIO::ST_* constants are defined: C<ST_RDONLY> and
		536	C<ST_NOSUID>.
		537
		538	The following non-POSIX IO::AIO::ST_* flag masks are defined to
		539	their correct value when available, or to C<0> on systems that do
		540	not support them: C<ST_NODEV>, C<ST_NOEXEC>, C<ST_SYNCHRONOUS>,
		541	C<ST_MANDLOCK>, C<ST_WRITE>, C<ST_APPEND>, C<ST_IMMUTABLE>, C<ST_NOATIME>,
		542	C<ST_NODIRATIME> and C<ST_RELATIME>.
		543
		544	Example: stat C</wd> and dump out the data if successful.
		545
		546	aio_statvfs "/wd", sub {
		547	my $f = $_[0]
		548	or die "statvfs: $!";
		549
		550	use Data::Dumper;
		551	say Dumper $f;
		552	};
		553
		554	# result:
		555	{
		556	bsize => 1024,
		557	bfree => 4333064312,
		558	blocks => 10253828096,
		559	files => 2050765568,
		560	flag => 4096,
		561	favail => 2042092649,
		562	bavail => 4333064312,
		563	ffree => 2042092649,
		564	namemax => 255,
		565	frsize => 1024,
		566	fsid => 1810
		567	}
		568
		569
418	=item aio_utime $fh_or_path, $atime, $mtime, $callback->($status)	570	=item aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
419		571
420	Works like perl's C<utime> function (including the special case of $atime	572	Works like perl's C<utime> function (including the special case of $atime
421	and $mtime being undef). Fractional times are supported if the underlying	573	and $mtime being undef). Fractional times are supported if the underlying
422	syscalls support them.	574	syscalls support them.
…		…
470		622
471	The only (POSIX-) portable way of calling this function is:	623	The only (POSIX-) portable way of calling this function is:
472		624
473	aio_mknod $path, IO::AIO::S_IFIFO | $mode, 0, sub { ...	625	aio_mknod $path, IO::AIO::S_IFIFO | $mode, 0, sub { ...
474		626
		627	See C<aio_stat> for info about some potentially helpful extra constants
		628	and functions.
475		629
476	=item aio_link $srcpath, $dstpath, $callback->($status)	630	=item aio_link $srcpath, $dstpath, $callback->($status)
477		631
478	Asynchronously create a new link to the existing object at C<$srcpath> at	632	Asynchronously create a new link to the existing object at C<$srcpath> at
479	the path C<$dstpath> and call the callback with the result code.	633	the path C<$dstpath> and call the callback with the result code.
…		…
490	Asynchronously read the symlink specified by C<$path> and pass it to	644	Asynchronously read the symlink specified by C<$path> and pass it to
491	the callback. If an error occurs, nothing or undef gets passed to the	645	the callback. If an error occurs, nothing or undef gets passed to the
492	callback.	646	callback.
493		647
494		648
		649	=item aio_realpath $path, $callback->($path)
		650
		651	Asynchronously make the path absolute and resolve any symlinks in
		652	C<$path>. The resulting path only consists of directories (Same as
		653	L<Cwd::realpath>).
		654
		655	This request can be used to get the absolute path of the current working
		656	directory by passing it a path of F<.> (a single dot).
		657
		658
495	=item aio_rename $srcpath, $dstpath, $callback->($status)	659	=item aio_rename $srcpath, $dstpath, $callback->($status)
496		660
497	Asynchronously rename the object at C<$srcpath> to C<$dstpath>, just as	661	Asynchronously rename the object at C<$srcpath> to C<$dstpath>, just as
498	rename(2) and call the callback with the result code.	662	rename(2) and call the callback with the result code.
499		663
…		…
515		679
516	Unlike the POSIX call of the same name, C<aio_readdir> reads an entire	680	Unlike the POSIX call of the same name, C<aio_readdir> reads an entire
517	directory (i.e. opendir + readdir + closedir). The entries will not be	681	directory (i.e. opendir + readdir + closedir). The entries will not be
518	sorted, and will B<NOT> include the C<.> and C<..> entries.	682	sorted, and will B<NOT> include the C<.> and C<..> entries.
519		683
520	The callback a single argument which is either C<undef> or an array-ref	684	The callback is passed a single argument which is either C<undef> or an
521	with the filenames.	685	array-ref with the filenames.
		686
		687
		688	=item aio_readdirx $pathname, $flags, $callback->($entries, $flags)
		689
		690	Quite similar to C<aio_readdir>, but the C<$flags> argument allows to tune
		691	behaviour and output format. In case of an error, C<$entries> will be
		692	C<undef>.
		693
		694	The flags are a combination of the following constants, ORed together (the
		695	flags will also be passed to the callback, possibly modified):
		696
		697	=over 4
		698
		699	=item IO::AIO::READDIR_DENTS
		700
		701	When this flag is off, then the callback gets an arrayref consisting of
		702	names only (as with C<aio_readdir>), otherwise it gets an arrayref with
		703	C<[$name, $type, $inode]> arrayrefs, each describing a single directory
		704	entry in more detail.
		705
		706	C<$name> is the name of the entry.
		707
		708	C<$type> is one of the C<IO::AIO::DT_xxx> constants:
		709
		710	C<IO::AIO::DT_UNKNOWN>, C<IO::AIO::DT_FIFO>, C<IO::AIO::DT_CHR>, C<IO::AIO::DT_DIR>,
		711	C<IO::AIO::DT_BLK>, C<IO::AIO::DT_REG>, C<IO::AIO::DT_LNK>, C<IO::AIO::DT_SOCK>,
		712	C<IO::AIO::DT_WHT>.
		713
		714	C<IO::AIO::DT_UNKNOWN> means just that: readdir does not know. If you need to
		715	know, you have to run stat yourself. Also, for speed reasons, the C<$type>
		716	scalars are read-only: you can not modify them.
		717
		718	C<$inode> is the inode number (which might not be exact on systems with 64
		719	bit inode numbers and 32 bit perls). This field has unspecified content on
		720	systems that do not deliver the inode information.
		721
		722	=item IO::AIO::READDIR_DIRS_FIRST
		723
		724	When this flag is set, then the names will be returned in an order where
		725	likely directories come first, in optimal stat order. This is useful when
		726	you need to quickly find directories, or you want to find all directories
		727	while avoiding to stat() each entry.
		728
		729	If the system returns type information in readdir, then this is used
		730	to find directories directly. Otherwise, likely directories are names
		731	beginning with ".", or otherwise names with no dots, of which names with
		732	short names are tried first.
		733
		734	=item IO::AIO::READDIR_STAT_ORDER
		735
		736	When this flag is set, then the names will be returned in an order
		737	suitable for stat()'ing each one. That is, when you plan to stat()
		738	all files in the given directory, then the returned order will likely
		739	be fastest.
		740
		741	If both this flag and C<IO::AIO::READDIR_DIRS_FIRST> are specified, then
		742	the likely dirs come first, resulting in a less optimal stat order.
		743
		744	=item IO::AIO::READDIR_FOUND_UNKNOWN
		745
		746	This flag should not be set when calling C<aio_readdirx>. Instead, it
		747	is being set by C<aio_readdirx>, when any of the C<$type>'s found were
		748	C<IO::AIO::DT_UNKNOWN>. The absense of this flag therefore indicates that all
		749	C<$type>'s are known, which can be used to speed up some algorithms.
		750
		751	=back
522		752
523		753
524	=item aio_load $path, $data, $callback->($status)	754	=item aio_load $path, $data, $callback->($status)
525		755
526	This is a composite request that tries to fully load the given file into	756	This is a composite request that tries to fully load the given file into
527	memory. Status is the same as with aio_read.	757	memory. Status is the same as with aio_read.
528		758
529	=cut	759	=cut
530		760
531	sub aio_load($$;$) {	761	sub aio_load($$;$) {
532	aio_block {
533	my ($path, undef, $cb) = @_;	762	my ($path, undef, $cb) = @_;
534	my $data = \$_[1];	763	my $data = \$_[1];
535		764
536	my $pri = aioreq_pri;	765	my $pri = aioreq_pri;
537	my $grp = aio_group $cb;	766	my $grp = aio_group $cb;
		767
		768	aioreq_pri $pri;
		769	add $grp aio_open $path, O_RDONLY, 0, sub {
		770	my $fh = shift
		771	or return $grp->result (-1);
538		772
539	aioreq_pri $pri;	773	aioreq_pri $pri;
540	add $grp aio_open $path, O_RDONLY, 0, sub {
541	my $fh = shift
542	or return $grp->result (-1);
543
544	aioreq_pri $pri;
545	add $grp aio_read $fh, 0, (-s $fh), $$data, 0, sub {	774	add $grp aio_read $fh, 0, (-s $fh), $$data, 0, sub {
546	$grp->result ($_[0]);	775	$grp->result ($_[0]);
547	};
548	};	776	};
549
550	$grp
551	}	777	};
		778
		779	$grp
552	}	780	}
553		781
554	=item aio_copy $srcpath, $dstpath, $callback->($status)	782	=item aio_copy $srcpath, $dstpath, $callback->($status)
555		783
556	Try to copy the I<file> (directories not supported as either source or	784	Try to copy the I<file> (directories not supported as either source or
557	destination) from C<$srcpath> to C<$dstpath> and call the callback with	785	destination) from C<$srcpath> to C<$dstpath> and call the callback with
558	the C<0> (error) or C<-1> ok.	786	a status of C<0> (ok) or C<-1> (error, see C<$!>).
559		787
560	This is a composite request that it creates the destination file with	788	This is a composite request that creates the destination file with
561	mode 0200 and copies the contents of the source file into it using	789	mode 0200 and copies the contents of the source file into it using
562	C<aio_sendfile>, followed by restoring atime, mtime, access mode and	790	C<aio_sendfile>, followed by restoring atime, mtime, access mode and
563	uid/gid, in that order.	791	uid/gid, in that order.
564		792
565	If an error occurs, the partial destination file will be unlinked, if	793	If an error occurs, the partial destination file will be unlinked, if
…		…
567	errors are being ignored.	795	errors are being ignored.
568		796
569	=cut	797	=cut
570		798
571	sub aio_copy($$;$) {	799	sub aio_copy($$;$) {
572	aio_block {
573	my ($src, $dst, $cb) = @_;	800	my ($src, $dst, $cb) = @_;
574		801
575	my $pri = aioreq_pri;	802	my $pri = aioreq_pri;
576	my $grp = aio_group $cb;	803	my $grp = aio_group $cb;
577		804
578	aioreq_pri $pri;	805	aioreq_pri $pri;
579	add $grp aio_open $src, O_RDONLY, 0, sub {	806	add $grp aio_open $src, O_RDONLY, 0, sub {
580	if (my $src_fh = $_[0]) {	807	if (my $src_fh = $_[0]) {
581	my @stat = stat $src_fh;	808	my @stat = stat $src_fh; # hmm, might block over nfs?
582		809
583	aioreq_pri $pri;	810	aioreq_pri $pri;
584	add $grp aio_open $dst, O_CREAT | O_WRONLY | O_TRUNC, 0200, sub {	811	add $grp aio_open $dst, O_CREAT | O_WRONLY | O_TRUNC, 0200, sub {
585	if (my $dst_fh = $_[0]) {	812	if (my $dst_fh = $_[0]) {
586	aioreq_pri $pri;	813	aioreq_pri $pri;
587	add $grp aio_sendfile $dst_fh, $src_fh, 0, $stat[7], sub {	814	add $grp aio_sendfile $dst_fh, $src_fh, 0, $stat[7], sub {
588	if ($_[0] == $stat[7]) {	815	if ($_[0] == $stat[7]) {
589	$grp->result (0);	816	$grp->result (0);
590	close $src_fh;	817	close $src_fh;
591		818
592	# those should not normally block. should. should.
593	utime $stat[8], $stat[9], $dst;
594	chmod $stat[2] & 07777, $dst_fh;
595	chown $stat[4], $stat[5], $dst_fh;
596	close $dst_fh;
597	} else {	819	my $ch = sub {
598	$grp->result (-1);
599	close $src_fh;
600	close $dst_fh;
601
602	aioreq $pri;	820	aioreq_pri $pri;
		821	add $grp aio_chmod $dst_fh, $stat[2] & 07777, sub {
		822	aioreq_pri $pri;
		823	add $grp aio_chown $dst_fh, $stat[4], $stat[5], sub {
		824	aioreq_pri $pri;
603	add $grp aio_unlink $dst;	825	add $grp aio_close $dst_fh;
		826	}
		827	};
604	}	828	};
		829
		830	aioreq_pri $pri;
		831	add $grp aio_utime $dst_fh, $stat[8], $stat[9], sub {
		832	if ($_[0] < 0 && $! == ENOSYS) {
		833	aioreq_pri $pri;
		834	add $grp aio_utime $dst, $stat[8], $stat[9], $ch;
		835	} else {
		836	$ch->();
		837	}
		838	};
		839	} else {
		840	$grp->result (-1);
		841	close $src_fh;
		842	close $dst_fh;
		843
		844	aioreq $pri;
		845	add $grp aio_unlink $dst;
605	};	846	}
606	} else {
607	$grp->result (-1);
608	}	847	};
		848	} else {
		849	$grp->result (-1);
609	},	850	}
610
611	} else {
612	$grp->result (-1);
613	}	851	},
		852
		853	} else {
		854	$grp->result (-1);
614	};	855	}
615
616	$grp
617	}	856	};
		857
		858	$grp
618	}	859	}
619		860
620	=item aio_move $srcpath, $dstpath, $callback->($status)	861	=item aio_move $srcpath, $dstpath, $callback->($status)
621		862
622	Try to move the I<file> (directories not supported as either source or	863	Try to move the I<file> (directories not supported as either source or
623	destination) from C<$srcpath> to C<$dstpath> and call the callback with	864	destination) from C<$srcpath> to C<$dstpath> and call the callback with
624	the C<0> (error) or C<-1> ok.	865	a status of C<0> (ok) or C<-1> (error, see C<$!>).
625		866
626	This is a composite request that tries to rename(2) the file first. If	867	This is a composite request that tries to rename(2) the file first; if
627	rename files with C<EXDEV>, it copies the file with C<aio_copy> and, if	868	rename fails with C<EXDEV>, it copies the file with C<aio_copy> and, if
628	that is successful, unlinking the C<$srcpath>.	869	that is successful, unlinks the C<$srcpath>.
629		870
630	=cut	871	=cut
631		872
632	sub aio_move($$;$) {	873	sub aio_move($$;$) {
633	aio_block {
634	my ($src, $dst, $cb) = @_;	874	my ($src, $dst, $cb) = @_;
635		875
636	my $pri = aioreq_pri;	876	my $pri = aioreq_pri;
637	my $grp = aio_group $cb;	877	my $grp = aio_group $cb;
638		878
639	aioreq_pri $pri;	879	aioreq_pri $pri;
640	add $grp aio_rename $src, $dst, sub {	880	add $grp aio_rename $src, $dst, sub {
641	if ($_[0] && $! == EXDEV) {	881	if ($_[0] && $! == EXDEV) {
642	aioreq_pri $pri;	882	aioreq_pri $pri;
643	add $grp aio_copy $src, $dst, sub {	883	add $grp aio_copy $src, $dst, sub {
644	$grp->result ($_[0]);
645
646	if (!$_[0]) {
647	aioreq_pri $pri;
648	add $grp aio_unlink $src;
649	}
650	};
651	} else {
652	$grp->result ($_[0]);	884	$grp->result ($_[0]);
		885
		886	unless ($_[0]) {
		887	aioreq_pri $pri;
		888	add $grp aio_unlink $src;
		889	}
653	}	890	};
		891	} else {
		892	$grp->result ($_[0]);
654	};	893	}
655
656	$grp
657	}	894	};
		895
		896	$grp
658	}	897	}
659		898
660	=item aio_scandir $path, $maxreq, $callback->($dirs, $nondirs)	899	=item aio_scandir $path, $maxreq, $callback->($dirs, $nondirs)
661		900
662	Scans a directory (similar to C<aio_readdir>) but additionally tries to	901	Scans a directory (similar to C<aio_readdir>) but additionally tries to
…		…
682		921
683	Implementation notes.	922	Implementation notes.
684		923
685	The C<aio_readdir> cannot be avoided, but C<stat()>'ing every entry can.	924	The C<aio_readdir> cannot be avoided, but C<stat()>'ing every entry can.
686		925
		926	If readdir returns file type information, then this is used directly to
		927	find directories.
		928
687	After reading the directory, the modification time, size etc. of the	929	Otherwise, after reading the directory, the modification time, size etc.
688	directory before and after the readdir is checked, and if they match (and	930	of the directory before and after the readdir is checked, and if they
689	isn't the current time), the link count will be used to decide how many	931	match (and isn't the current time), the link count will be used to decide
690	entries are directories (if >= 2). Otherwise, no knowledge of the number	932	how many entries are directories (if >= 2). Otherwise, no knowledge of the
691	of subdirectories will be assumed.	933	number of subdirectories will be assumed.
692		934
693	Then entries will be sorted into likely directories (everything without	935	Then entries will be sorted into likely directories a non-initial dot
694	a non-initial dot currently) and likely non-directories (everything	936	currently) and likely non-directories (see C<aio_readdirx>). Then every
695	else). Then every entry plus an appended C</.> will be C<stat>'ed,	937	entry plus an appended C</.> will be C<stat>'ed, likely directories first,
696	likely directories first. If that succeeds, it assumes that the entry	938	in order of their inode numbers. If that succeeds, it assumes that the
697	is a directory or a symlink to directory (which will be checked	939	entry is a directory or a symlink to directory (which will be checked
698	seperately). This is often faster than stat'ing the entry itself because	940	seperately). This is often faster than stat'ing the entry itself because
699	filesystems might detect the type of the entry without reading the inode	941	filesystems might detect the type of the entry without reading the inode
700	data (e.g. ext2fs filetype feature).	942	data (e.g. ext2fs filetype feature), even on systems that cannot return
		943	the filetype information on readdir.
701		944
702	If the known number of directories (link count - 2) has been reached, the	945	If the known number of directories (link count - 2) has been reached, the
703	rest of the entries is assumed to be non-directories.	946	rest of the entries is assumed to be non-directories.
704		947
705	This only works with certainty on POSIX (= UNIX) filesystems, which	948	This only works with certainty on POSIX (= UNIX) filesystems, which
…		…
710	directory counting heuristic.	953	directory counting heuristic.
711		954
712	=cut	955	=cut
713		956
714	sub aio_scandir($$;$) {	957	sub aio_scandir($$;$) {
715	aio_block {
716	my ($path, $maxreq, $cb) = @_;	958	my ($path, $maxreq, $cb) = @_;
717		959
718	my $pri = aioreq_pri;	960	my $pri = aioreq_pri;
719		961
720	my $grp = aio_group $cb;	962	my $grp = aio_group $cb;
721		963
722	$maxreq = 4 if $maxreq <= 0;	964	$maxreq = 4 if $maxreq <= 0;
723		965
724	# stat once	966	# stat once
		967	aioreq_pri $pri;
		968	add $grp aio_stat $path, sub {
		969	return $grp->result () if $_[0];
		970	my $now = time;
		971	my $hash1 = join ":", (stat _)[0,1,3,7,9];
		972
		973	# read the directory entries
725	aioreq_pri $pri;	974	aioreq_pri $pri;
726	add $grp aio_stat $path, sub {	975	add $grp aio_readdirx $path, READDIR_DIRS_FIRST, sub {
		976	my $entries = shift
727	return $grp->result () if $_[0];	977	or return $grp->result ();
728	my $now = time;
729	my $hash1 = join ":", (stat _)[0,1,3,7,9];
730		978
731	# read the directory entries	979	# stat the dir another time
732	aioreq_pri $pri;	980	aioreq_pri $pri;
733	add $grp aio_readdir $path, sub {
734	my $entries = shift
735	or return $grp->result ();
736
737	# stat the dir another time
738	aioreq_pri $pri;
739	add $grp aio_stat $path, sub {	981	add $grp aio_stat $path, sub {
740	my $hash2 = join ":", (stat _)[0,1,3,7,9];	982	my $hash2 = join ":", (stat _)[0,1,3,7,9];
741		983
742	my $ndirs;	984	my $ndirs;
743		985
744	# take the slow route if anything looks fishy	986	# take the slow route if anything looks fishy
745	if ($hash1 ne $hash2 or (stat _)[9] == $now) {	987	if ($hash1 ne $hash2 or (stat _)[9] == $now) {
746	$ndirs = -1;	988	$ndirs = -1;
747	} else {	989	} else {
748	# if nlink == 2, we are finished	990	# if nlink == 2, we are finished
749	# on non-posix-fs's, we rely on nlink < 2	991	# for non-posix-fs's, we rely on nlink < 2
750	$ndirs = (stat _)[3] - 2	992	$ndirs = (stat _)[3] - 2
751	or return $grp->result ([], $entries);	993	or return $grp->result ([], $entries);
752	}	994	}
753		995
754	# sort into likely dirs and likely nondirs
755	# dirs == files without ".", short entries first
756	$entries = [map $_->[0],
757	sort { $b->[1] cmp $a->[1] }
758	map [$_, sprintf "%s%04d", (/.\./ ? "1" : "0"), length],
759	@$entries];
760
761	my (@dirs, @nondirs);	996	my (@dirs, @nondirs);
762		997
763	my $statgrp = add $grp aio_group sub {	998	my $statgrp = add $grp aio_group sub {
764	$grp->result (\@dirs, \@nondirs);	999	$grp->result (\@dirs, \@nondirs);
765	};	1000	};
766		1001
767	limit $statgrp $maxreq;	1002	limit $statgrp $maxreq;
768	feed $statgrp sub {	1003	feed $statgrp sub {
769	return unless @$entries;	1004	return unless @$entries;
770	my $entry = pop @$entries;	1005	my $entry = shift @$entries;
771		1006
772	aioreq_pri $pri;	1007	aioreq_pri $pri;
773	add $statgrp aio_stat "$path/$entry/.", sub {	1008	add $statgrp aio_stat "$path/$entry/.", sub {
774	if ($_[0] < 0) {	1009	if ($_[0] < 0) {
775	push @nondirs, $entry;	1010	push @nondirs, $entry;
776	} else {	1011	} else {
777	# need to check for real directory	1012	# need to check for real directory
778	aioreq_pri $pri;	1013	aioreq_pri $pri;
779	add $statgrp aio_lstat "$path/$entry", sub {	1014	add $statgrp aio_lstat "$path/$entry", sub {
780	if (-d _) {	1015	if (-d _) {
781	push @dirs, $entry;	1016	push @dirs, $entry;
782		1017
783	unless (--$ndirs) {	1018	unless (--$ndirs) {
784	push @nondirs, @$entries;	1019	push @nondirs, @$entries;
785	feed $statgrp;	1020	feed $statgrp;
786	}
787	} else {
788	push @nondirs, $entry;
789	}	1021	}
		1022	} else {
		1023	push @nondirs, $entry;
790	}	1024	}
791	}	1025	}
792	};	1026	}
793	};	1027	};
794	};	1028	};
795	};	1029	};
796	};	1030	};
797
798	$grp
799	}	1031	};
		1032
		1033	$grp
800	}	1034	}
801		1035
802	=item aio_rmtree $path, $callback->($status)	1036	=item aio_rmtree $path, $callback->($status)
803		1037
804	Delete a directory tree starting (and including) C<$path>, return the	1038	Delete a directory tree starting (and including) C<$path>, return the
…		…
808		1042
809	=cut	1043	=cut
810		1044
811	sub aio_rmtree;	1045	sub aio_rmtree;
812	sub aio_rmtree($;$) {	1046	sub aio_rmtree($;$) {
813	aio_block {
814	my ($path, $cb) = @_;	1047	my ($path, $cb) = @_;
815		1048
816	my $pri = aioreq_pri;	1049	my $pri = aioreq_pri;
817	my $grp = aio_group $cb;	1050	my $grp = aio_group $cb;
818		1051
819	aioreq_pri $pri;	1052	aioreq_pri $pri;
820	add $grp aio_scandir $path, 0, sub {	1053	add $grp aio_scandir $path, 0, sub {
821	my ($dirs, $nondirs) = @_;	1054	my ($dirs, $nondirs) = @_;
822		1055
823	my $dirgrp = aio_group sub {	1056	my $dirgrp = aio_group sub {
824	add $grp aio_rmdir $path, sub {	1057	add $grp aio_rmdir $path, sub {
825	$grp->result ($_[0]);	1058	$grp->result ($_[0]);
826	};
827	};	1059	};
828
829	(aioreq_pri $pri), add $dirgrp aio_rmtree "$path/$_" for @$dirs;
830	(aioreq_pri $pri), add $dirgrp aio_unlink "$path/$_" for @$nondirs;
831
832	add $grp $dirgrp;
833	};	1060	};
834		1061
835	$grp	1062	(aioreq_pri $pri), add $dirgrp aio_rmtree "$path/$_" for @$dirs;
		1063	(aioreq_pri $pri), add $dirgrp aio_unlink "$path/$_" for @$nondirs;
		1064
		1065	add $grp $dirgrp;
836	}	1066	};
		1067
		1068	$grp
837	}	1069	}
		1070
		1071	=item aio_sync $callback->($status)
		1072
		1073	Asynchronously call sync and call the callback when finished.
838		1074
839	=item aio_fsync $fh, $callback->($status)	1075	=item aio_fsync $fh, $callback->($status)
840		1076
841	Asynchronously call fsync on the given filehandle and call the callback	1077	Asynchronously call fsync on the given filehandle and call the callback
842	with the fsync result code.	1078	with the fsync result code.
…		…
846	Asynchronously call fdatasync on the given filehandle and call the	1082	Asynchronously call fdatasync on the given filehandle and call the
847	callback with the fdatasync result code.	1083	callback with the fdatasync result code.
848		1084
849	If this call isn't available because your OS lacks it or it couldn't be	1085	If this call isn't available because your OS lacks it or it couldn't be
850	detected, it will be emulated by calling C<fsync> instead.	1086	detected, it will be emulated by calling C<fsync> instead.
		1087
		1088	=item aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)
		1089
		1090	Sync the data portion of the file specified by C<$offset> and C<$length>
		1091	to disk (but NOT the metadata), by calling the Linux-specific
		1092	sync_file_range call. If sync_file_range is not available or it returns
		1093	ENOSYS, then fdatasync or fsync is being substituted.
		1094
		1095	C<$flags> can be a combination of C<IO::AIO::SYNC_FILE_RANGE_WAIT_BEFORE>,
		1096	C<IO::AIO::SYNC_FILE_RANGE_WRITE> and
		1097	C<IO::AIO::SYNC_FILE_RANGE_WAIT_AFTER>: refer to the sync_file_range
		1098	manpage for details.
		1099
		1100	=item aio_pathsync $path, $callback->($status)
		1101
		1102	This request tries to open, fsync and close the given path. This is a
		1103	composite request intended to sync directories after directory operations
		1104	(E.g. rename). This might not work on all operating systems or have any
		1105	specific effect, but usually it makes sure that directory changes get
		1106	written to disc. It works for anything that can be opened for read-only,
		1107	not just directories.
		1108
		1109	Future versions of this function might fall back to other methods when
		1110	C<fsync> on the directory fails (such as calling C<sync>).
		1111
		1112	Passes C<0> when everything went ok, and C<-1> on error.
		1113
		1114	=cut
		1115
		1116	sub aio_pathsync($;$) {
		1117	my ($path, $cb) = @_;
		1118
		1119	my $pri = aioreq_pri;
		1120	my $grp = aio_group $cb;
		1121
		1122	aioreq_pri $pri;
		1123	add $grp aio_open $path, O_RDONLY, 0, sub {
		1124	my ($fh) = @_;
		1125	if ($fh) {
		1126	aioreq_pri $pri;
		1127	add $grp aio_fsync $fh, sub {
		1128	$grp->result ($_[0]);
		1129
		1130	aioreq_pri $pri;
		1131	add $grp aio_close $fh;
		1132	};
		1133	} else {
		1134	$grp->result (-1);
		1135	}
		1136	};
		1137
		1138	$grp
		1139	}
		1140
		1141	=item aio_msync $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
		1142
		1143	This is a rather advanced IO::AIO call, which only works on mmap(2)ed
		1144	scalars (see the C<IO::AIO::mmap> function, although it also works on data
		1145	scalars managed by the L<Sys::Mmap> or L<Mmap> modules, note that the
		1146	scalar must only be modified in-place while an aio operation is pending on
		1147	it).
		1148
		1149	It calls the C<msync> function of your OS, if available, with the memory
		1150	area starting at C<$offset> in the string and ending C<$length> bytes
		1151	later. If C<$length> is negative, counts from the end, and if C<$length>
		1152	is C<undef>, then it goes till the end of the string. The flags can be
		1153	a combination of C<IO::AIO::MS_ASYNC>, C<IO::AIO::MS_INVALIDATE> and
		1154	C<IO::AIO::MS_SYNC>.
		1155
		1156	=item aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
		1157
		1158	This is a rather advanced IO::AIO call, which works best on mmap(2)ed
		1159	scalars.
		1160
		1161	It touches (reads or writes) all memory pages in the specified
		1162	range inside the scalar. All caveats and parameters are the same
		1163	as for C<aio_msync>, above, except for flags, which must be either
		1164	C<0> (which reads all pages and ensures they are instantiated) or
		1165	C<IO::AIO::MT_MODIFY>, which modifies the memory page s(by reading and
		1166	writing an octet from it, which dirties the page).
		1167
		1168	=item aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
		1169
		1170	This is a rather advanced IO::AIO call, which works best on mmap(2)ed
		1171	scalars.
		1172
		1173	It reads in all the pages of the underlying storage into memory (if any)
		1174	and locks them, so they are not getting swapped/paged out or removed.
		1175
		1176	If C<$length> is undefined, then the scalar will be locked till the end.
		1177
		1178	On systems that do not implement C<mlock>, this function returns C<-1>
		1179	and sets errno to C<ENOSYS>.
		1180
		1181	Note that the corresponding C<munlock> is synchronous and is
		1182	documented under L<MISCELLANEOUS FUNCTIONS>.
		1183
		1184	Example: open a file, mmap and mlock it - both will be undone when
		1185	C<$data> gets destroyed.
		1186
		1187	open my $fh, "<", $path or die "$path: $!";
		1188	my $data;
		1189	IO::AIO::mmap $data, -s $fh, IO::AIO::PROT_READ, IO::AIO::MAP_SHARED, $fh;
		1190	aio_mlock $data; # mlock in background
		1191
		1192	=item aio_mlockall $flags, $callback->($status)
		1193
		1194	Calls the C<mlockall> function with the given C<$flags> (a combination of
		1195	C<IO::AIO::MCL_CURRENT> and C<IO::AIO::MCL_FUTURE>).
		1196
		1197	On systems that do not implement C<mlockall>, this function returns C<-1>
		1198	and sets errno to C<ENOSYS>.
		1199
		1200	Note that the corresponding C<munlockall> is synchronous and is
		1201	documented under L<MISCELLANEOUS FUNCTIONS>.
		1202
		1203	Example: asynchronously lock all current and future pages into memory.
		1204
		1205	aio_mlockall IO::AIO::MCL_FUTURE;
851		1206
852	=item aio_group $callback->(...)	1207	=item aio_group $callback->(...)
853		1208
854	This is a very special aio request: Instead of doing something, it is a	1209	This is a very special aio request: Instead of doing something, it is a
855	container for other aio requests, which is useful if you want to bundle	1210	container for other aio requests, which is useful if you want to bundle
…		…
905	=item cancel $req	1260	=item cancel $req
906		1261
907	Cancels the request, if possible. Has the effect of skipping execution	1262	Cancels the request, if possible. Has the effect of skipping execution
908	when entering the B<execute> state and skipping calling the callback when	1263	when entering the B<execute> state and skipping calling the callback when
909	entering the the B<result> state, but will leave the request otherwise	1264	entering the the B<result> state, but will leave the request otherwise
910	untouched. That means that requests that currently execute will not be	1265	untouched (with the exception of readdir). That means that requests that
911	stopped and resources held by the request will not be freed prematurely.	1266	currently execute will not be stopped and resources held by the request
		1267	will not be freed prematurely.
912		1268
913	=item cb $req $callback->(...)	1269	=item cb $req $callback->(...)
914		1270
915	Replace (or simply set) the callback registered to the request.	1271	Replace (or simply set) the callback registered to the request.
916		1272
…		…
967	Their lifetime, simplified, looks like this: when they are empty, they	1323	Their lifetime, simplified, looks like this: when they are empty, they
968	will finish very quickly. If they contain only requests that are in the	1324	will finish very quickly. If they contain only requests that are in the
969	C<done> state, they will also finish. Otherwise they will continue to	1325	C<done> state, they will also finish. Otherwise they will continue to
970	exist.	1326	exist.
971		1327
972	That means after creating a group you have some time to add requests. And	1328	That means after creating a group you have some time to add requests
973	in the callbacks of those requests, you can add further requests to the	1329	(precisely before the callback has been invoked, which is only done within
974	group. And only when all those requests have finished will the the group	1330	the C<poll_cb>). And in the callbacks of those requests, you can add
975	itself finish.	1331	further requests to the group. And only when all those requests have
		1332	finished will the the group itself finish.
976		1333
977	=over 4	1334	=over 4
978		1335
979	=item add $grp ...	1336	=item add $grp ...
980		1337
…		…
989	=item $grp->cancel_subs	1346	=item $grp->cancel_subs
990		1347
991	Cancel all subrequests and clears any feeder, but not the group request	1348	Cancel all subrequests and clears any feeder, but not the group request
992	itself. Useful when you queued a lot of events but got a result early.	1349	itself. Useful when you queued a lot of events but got a result early.
993		1350
		1351	The group request will finish normally (you cannot add requests to the
		1352	group).
		1353
994	=item $grp->result (...)	1354	=item $grp->result (...)
995		1355
996	Set the result value(s) that will be passed to the group callback when all	1356	Set the result value(s) that will be passed to the group callback when all
997	subrequests have finished and set thre groups errno to the current value	1357	subrequests have finished and set the groups errno to the current value
998	of errno (just like calling C<errno> without an error number). By default,	1358	of errno (just like calling C<errno> without an error number). By default,
999	no argument will be passed and errno is zero.	1359	no argument will be passed and errno is zero.
1000		1360
1001	=item $grp->errno ([$errno])	1361	=item $grp->errno ([$errno])
1002		1362
…		…
1013	=item feed $grp $callback->($grp)	1373	=item feed $grp $callback->($grp)
1014		1374
1015	Sets a feeder/generator on this group: every group can have an attached	1375	Sets a feeder/generator on this group: every group can have an attached
1016	generator that generates requests if idle. The idea behind this is that,	1376	generator that generates requests if idle. The idea behind this is that,
1017	although you could just queue as many requests as you want in a group,	1377	although you could just queue as many requests as you want in a group,
1018	this might starve other requests for a potentially long time. For	1378	this might starve other requests for a potentially long time. For example,
1019	example, C<aio_scandir> might generate hundreds of thousands C<aio_stat>	1379	C<aio_scandir> might generate hundreds of thousands C<aio_stat> requests,
1020	requests, delaying any later requests for a long time.	1380	delaying any later requests for a long time.
1021		1381
1022	To avoid this, and allow incremental generation of requests, you can	1382	To avoid this, and allow incremental generation of requests, you can
1023	instead a group and set a feeder on it that generates those requests. The	1383	instead a group and set a feeder on it that generates those requests. The
1024	feed callback will be called whenever there are few enough (see C<limit>,	1384	feed callback will be called whenever there are few enough (see C<limit>,
1025	below) requests active in the group itself and is expected to queue more	1385	below) requests active in the group itself and is expected to queue more
…		…
1029	not impose any limits).	1389	not impose any limits).
1030		1390
1031	If the feed does not queue more requests when called, it will be	1391	If the feed does not queue more requests when called, it will be
1032	automatically removed from the group.	1392	automatically removed from the group.
1033		1393
1034	If the feed limit is C<0>, it will be set to C<2> automatically.	1394	If the feed limit is C<0> when this method is called, it will be set to
		1395	C<2> automatically.
1035		1396
1036	Example:	1397	Example:
1037		1398
1038	# stat all files in @files, but only ever use four aio requests concurrently:	1399	# stat all files in @files, but only ever use four aio requests concurrently:
1039		1400
…		…
1051	Sets the feeder limit for the group: The feeder will be called whenever	1412	Sets the feeder limit for the group: The feeder will be called whenever
1052	the group contains less than this many requests.	1413	the group contains less than this many requests.
1053		1414
1054	Setting the limit to C<0> will pause the feeding process.	1415	Setting the limit to C<0> will pause the feeding process.
1055		1416
		1417	The default value for the limit is C<0>, but note that setting a feeder
		1418	automatically bumps it up to C<2>.
		1419
1056	=back	1420	=back
1057		1421
1058	=head2 SUPPORT FUNCTIONS	1422	=head2 SUPPORT FUNCTIONS
1059		1423
1060	=head3 EVENT PROCESSING AND EVENT LOOP INTEGRATION	1424	=head3 EVENT PROCESSING AND EVENT LOOP INTEGRATION
…		…
1062	=over 4	1426	=over 4
1063		1427
1064	=item $fileno = IO::AIO::poll_fileno	1428	=item $fileno = IO::AIO::poll_fileno
1065		1429
1066	Return the I<request result pipe file descriptor>. This filehandle must be	1430	Return the I<request result pipe file descriptor>. This filehandle must be
1067	polled for reading by some mechanism outside this module (e.g. Event or	1431	polled for reading by some mechanism outside this module (e.g. EV, Glib,
1068	select, see below or the SYNOPSIS). If the pipe becomes readable you have	1432	select and so on, see below or the SYNOPSIS). If the pipe becomes readable
1069	to call C<poll_cb> to check the results.	1433	you have to call C<poll_cb> to check the results.
1070		1434
1071	See C<poll_cb> for an example.	1435	See C<poll_cb> for an example.
1072		1436
1073	=item IO::AIO::poll_cb	1437	=item IO::AIO::poll_cb
1074		1438
1075	Process some outstanding events on the result pipe. You have to call this	1439	Process some outstanding events on the result pipe. You have to call
1076	regularly. Returns the number of events processed. Returns immediately	1440	this regularly. Returns C<0> if all events could be processed (or there
1077	when no events are outstanding. The amount of events processed depends on	1441	were no events to process), or C<-1> if it returned earlier for whatever
1078	the settings of C<IO::AIO::max_poll_req> and C<IO::AIO::max_poll_time>.	1442	reason. Returns immediately when no events are outstanding. The amount of
		1443	events processed depends on the settings of C<IO::AIO::max_poll_req> and
		1444	C<IO::AIO::max_poll_time>.
1079		1445
1080	If not all requests were processed for whatever reason, the filehandle	1446	If not all requests were processed for whatever reason, the filehandle
1081	will still be ready when C<poll_cb> returns.	1447	will still be ready when C<poll_cb> returns, so normally you don't have to
		1448	do anything special to have it called later.
		1449
		1450	Apart from calling C<IO::AIO::poll_cb> when the event filehandle becomes
		1451	ready, it can be beneficial to call this function from loops which submit
		1452	a lot of requests, to make sure the results get processed when they become
		1453	available and not just when the loop is finished and the event loop takes
		1454	over again. This function returns very fast when there are no outstanding
		1455	requests.
1082		1456
1083	Example: Install an Event watcher that automatically calls	1457	Example: Install an Event watcher that automatically calls
1084	IO::AIO::poll_cb with high priority:	1458	IO::AIO::poll_cb with high priority (more examples can be found in the
		1459	SYNOPSIS section, at the top of this document):
1085		1460
1086	Event->io (fd => IO::AIO::poll_fileno,	1461	Event->io (fd => IO::AIO::poll_fileno,
1087	poll => 'r', async => 1,	1462	poll => 'r', async => 1,
1088	cb => \&IO::AIO::poll_cb);	1463	cb => \&IO::AIO::poll_cb);
		1464
		1465	=item IO::AIO::poll_wait
		1466
		1467	If there are any outstanding requests and none of them in the result
		1468	phase, wait till the result filehandle becomes ready for reading (simply
		1469	does a C<select> on the filehandle. This is useful if you want to
		1470	synchronously wait for some requests to finish).
		1471
		1472	See C<nreqs> for an example.
		1473
		1474	=item IO::AIO::poll
		1475
		1476	Waits until some requests have been handled.
		1477
		1478	Returns the number of requests processed, but is otherwise strictly
		1479	equivalent to:
		1480
		1481	IO::AIO::poll_wait, IO::AIO::poll_cb
		1482
		1483	=item IO::AIO::flush
		1484
		1485	Wait till all outstanding AIO requests have been handled.
		1486
		1487	Strictly equivalent to:
		1488
		1489	IO::AIO::poll_wait, IO::AIO::poll_cb
		1490	while IO::AIO::nreqs;
1089		1491
1090	=item IO::AIO::max_poll_reqs $nreqs	1492	=item IO::AIO::max_poll_reqs $nreqs
1091		1493
1092	=item IO::AIO::max_poll_time $seconds	1494	=item IO::AIO::max_poll_time $seconds
1093		1495
…		…
1118	# use a low priority so other tasks have priority	1520	# use a low priority so other tasks have priority
1119	Event->io (fd => IO::AIO::poll_fileno,	1521	Event->io (fd => IO::AIO::poll_fileno,
1120	poll => 'r', nice => 1,	1522	poll => 'r', nice => 1,
1121	cb => &IO::AIO::poll_cb);	1523	cb => &IO::AIO::poll_cb);
1122		1524
1123	=item IO::AIO::poll_wait
1124
1125	If there are any outstanding requests and none of them in the result
1126	phase, wait till the result filehandle becomes ready for reading (simply
1127	does a C<select> on the filehandle. This is useful if you want to
1128	synchronously wait for some requests to finish).
1129
1130	See C<nreqs> for an example.
1131
1132	=item IO::AIO::poll
1133
1134	Waits until some requests have been handled.
1135
1136	Returns the number of requests processed, but is otherwise strictly
1137	equivalent to:
1138
1139	IO::AIO::poll_wait, IO::AIO::poll_cb
1140
1141	=item IO::AIO::flush
1142
1143	Wait till all outstanding AIO requests have been handled.
1144
1145	Strictly equivalent to:
1146
1147	IO::AIO::poll_wait, IO::AIO::poll_cb
1148	while IO::AIO::nreqs;
1149
1150	=back	1525	=back
1151		1526
1152	=head3 CONTROLLING THE NUMBER OF THREADS	1527	=head3 CONTROLLING THE NUMBER OF THREADS
1153		1528
1154	=over	1529	=over
…		…
1187		1562
1188	Under normal circumstances you don't need to call this function.	1563	Under normal circumstances you don't need to call this function.
1189		1564
1190	=item IO::AIO::max_idle $nthreads	1565	=item IO::AIO::max_idle $nthreads
1191		1566
1192	Limit the number of threads (default: 4) that are allowed to idle (i.e.,	1567	Limit the number of threads (default: 4) that are allowed to idle
1193	threads that did not get a request to process within 10 seconds). That	1568	(i.e., threads that did not get a request to process within the idle
1194	means if a thread becomes idle while C<$nthreads> other threads are also	1569	timeout (default: 10 seconds). That means if a thread becomes idle while
1195	idle, it will free its resources and exit.	1570	C<$nthreads> other threads are also idle, it will free its resources and
		1571	exit.
1196		1572
1197	This is useful when you allow a large number of threads (e.g. 100 or 1000)	1573	This is useful when you allow a large number of threads (e.g. 100 or 1000)
1198	to allow for extremely high load situations, but want to free resources	1574	to allow for extremely high load situations, but want to free resources
1199	under normal circumstances (1000 threads can easily consume 30MB of RAM).	1575	under normal circumstances (1000 threads can easily consume 30MB of RAM).
1200		1576
1201	The default is probably ok in most situations, especially if thread	1577	The default is probably ok in most situations, especially if thread
1202	creation is fast. If thread creation is very slow on your system you might	1578	creation is fast. If thread creation is very slow on your system you might
1203	want to use larger values.	1579	want to use larger values.
1204		1580
		1581	=item IO::AIO::idle_timeout $seconds
		1582
		1583	Sets the minimum idle timeout (default 10) after which worker threads are
		1584	allowed to exit. SEe C<IO::AIO::max_idle>.
		1585
1205	=item $oldmaxreqs = IO::AIO::max_outstanding $maxreqs	1586	=item IO::AIO::max_outstanding $maxreqs
		1587
		1588	Sets the maximum number of outstanding requests to C<$nreqs>. If
		1589	you do queue up more than this number of requests, the next call to
		1590	C<IO::AIO::poll_cb> (and other functions calling C<poll_cb>, such as
		1591	C<IO::AIO::flush> or C<IO::AIO::poll>) will block until the limit is no
		1592	longer exceeded.
		1593
		1594	In other words, this setting does not enforce a queue limit, but can be
		1595	used to make poll functions block if the limit is exceeded.
1206		1596
1207	This is a very bad function to use in interactive programs because it	1597	This is a very bad function to use in interactive programs because it
1208	blocks, and a bad way to reduce concurrency because it is inexact: Better	1598	blocks, and a bad way to reduce concurrency because it is inexact: Better
1209	use an C<aio_group> together with a feed callback.	1599	use an C<aio_group> together with a feed callback.
1210		1600
1211	Sets the maximum number of outstanding requests to C<$nreqs>. If you	1601	It's main use is in scripts without an event loop - when you want to stat
1212	do queue up more than this number of requests, the next call to the	1602	a lot of files, you can write somehting like this:
1213	C<poll_cb> (and C<poll_some> and other functions calling C<poll_cb>)
1214	function will block until the limit is no longer exceeded.
1215		1603
1216	The default value is very large, so there is no practical limit on the	1604	IO::AIO::max_outstanding 32;
1217	number of outstanding requests.
1218		1605
1219	You can still queue as many requests as you want. Therefore,	1606	for my $path (...) {
1220	C<max_oustsanding> is mainly useful in simple scripts (with low values) or	1607	aio_stat $path , ...;
1221	as a stop gap to shield against fatal memory overflow (with large values).	1608	IO::AIO::poll_cb;
		1609	}
		1610
		1611	IO::AIO::flush;
		1612
		1613	The call to C<poll_cb> inside the loop will normally return instantly, but
		1614	as soon as more thna C<32> reqeusts are in-flight, it will block until
		1615	some requests have been handled. This keeps the loop from pushing a large
		1616	number of C<aio_stat> requests onto the queue.
		1617
		1618	The default value for C<max_outstanding> is very large, so there is no
		1619	practical limit on the number of outstanding requests.
1222		1620
1223	=back	1621	=back
1224		1622
1225	=head3 STATISTICAL INFORMATION	1623	=head3 STATISTICAL INFORMATION
1226		1624
…		…
1246	Returns the number of requests currently in the pending state (executed,	1644	Returns the number of requests currently in the pending state (executed,
1247	but not yet processed by poll_cb).	1645	but not yet processed by poll_cb).
1248		1646
1249	=back	1647	=back
1250		1648
		1649	=head3 MISCELLANEOUS FUNCTIONS
		1650
		1651	IO::AIO implements some functions that might be useful, but are not
		1652	asynchronous.
		1653
		1654	=over 4
		1655
		1656	=item IO::AIO::sendfile $ofh, $ifh, $offset, $count
		1657
		1658	Calls the C<eio_sendfile_sync> function, which is like C<aio_sendfile>,
		1659	but is blocking (this makes most sense if you know the input data is
		1660	likely cached already and the output filehandle is set to non-blocking
		1661	operations).
		1662
		1663	Returns the number of bytes copied, or C<-1> on error.
		1664
		1665	=item IO::AIO::fadvise $fh, $offset, $len, $advice
		1666
		1667	Simply calls the C<posix_fadvise> function (see its
		1668	manpage for details). The following advice constants are
		1669	avaiable: C<IO::AIO::FADV_NORMAL>, C<IO::AIO::FADV_SEQUENTIAL>,
		1670	C<IO::AIO::FADV_RANDOM>, C<IO::AIO::FADV_NOREUSE>,
		1671	C<IO::AIO::FADV_WILLNEED>, C<IO::AIO::FADV_DONTNEED>.
		1672
		1673	On systems that do not implement C<posix_fadvise>, this function returns
		1674	ENOSYS, otherwise the return value of C<posix_fadvise>.
		1675
		1676	=item IO::AIO::madvise $scalar, $offset, $len, $advice
		1677
		1678	Simply calls the C<posix_madvise> function (see its
		1679	manpage for details). The following advice constants are
		1680	avaiable: C<IO::AIO::MADV_NORMAL>, C<IO::AIO::MADV_SEQUENTIAL>,
		1681	C<IO::AIO::MADV_RANDOM>, C<IO::AIO::MADV_WILLNEED>, C<IO::AIO::MADV_DONTNEED>.
		1682
		1683	On systems that do not implement C<posix_madvise>, this function returns
		1684	ENOSYS, otherwise the return value of C<posix_madvise>.
		1685
		1686	=item IO::AIO::mprotect $scalar, $offset, $len, $protect
		1687
		1688	Simply calls the C<mprotect> function on the preferably AIO::mmap'ed
		1689	$scalar (see its manpage for details). The following protect
		1690	constants are avaiable: C<IO::AIO::PROT_NONE>, C<IO::AIO::PROT_READ>,
		1691	C<IO::AIO::PROT_WRITE>, C<IO::AIO::PROT_EXEC>.
		1692
		1693	On systems that do not implement C<mprotect>, this function returns
		1694	ENOSYS, otherwise the return value of C<mprotect>.
		1695
		1696	=item IO::AIO::mmap $scalar, $length, $prot, $flags, $fh[, $offset]
		1697
		1698	Memory-maps a file (or anonymous memory range) and attaches it to the
		1699	given C<$scalar>, which will act like a string scalar.
		1700
		1701	The only operations allowed on the scalar are C<substr>/C<vec> that don't
		1702	change the string length, and most read-only operations such as copying it
		1703	or searching it with regexes and so on.
		1704
		1705	Anything else is unsafe and will, at best, result in memory leaks.
		1706
		1707	The memory map associated with the C<$scalar> is automatically removed
		1708	when the C<$scalar> is destroyed, or when the C<IO::AIO::mmap> or
		1709	C<IO::AIO::munmap> functions are called.
		1710
		1711	This calls the C<mmap>(2) function internally. See your system's manual
		1712	page for details on the C<$length>, C<$prot> and C<$flags> parameters.
		1713
		1714	The C<$length> must be larger than zero and smaller than the actual
		1715	filesize.
		1716
		1717	C<$prot> is a combination of C<IO::AIO::PROT_NONE>, C<IO::AIO::PROT_EXEC>,
		1718	C<IO::AIO::PROT_READ> and/or C<IO::AIO::PROT_WRITE>,
		1719
		1720	C<$flags> can be a combination of C<IO::AIO::MAP_SHARED> or
		1721	C<IO::AIO::MAP_PRIVATE>, or a number of system-specific flags (when
		1722	not available, the are defined as 0): C<IO::AIO::MAP_ANONYMOUS>
		1723	(which is set to C<MAP_ANON> if your system only provides this
		1724	constant), C<IO::AIO::MAP_HUGETLB>, C<IO::AIO::MAP_LOCKED>,
		1725	C<IO::AIO::MAP_NORESERVE>, C<IO::AIO::MAP_POPULATE> or
		1726	C<IO::AIO::MAP_NONBLOCK>
		1727
		1728	If C<$fh> is C<undef>, then a file descriptor of C<-1> is passed.
		1729
		1730	C<$offset> is the offset from the start of the file - it generally must be
		1731	a multiple of C<IO::AIO::PAGESIZE> and defaults to C<0>.
		1732
		1733	Example:
		1734
		1735	use Digest::MD5;
		1736	use IO::AIO;
		1737
		1738	open my $fh, "<verybigfile"
		1739	or die "$!";
		1740
		1741	IO::AIO::mmap my $data, -s $fh, IO::AIO::PROT_READ, IO::AIO::MAP_SHARED, $fh
		1742	or die "verybigfile: $!";
		1743
		1744	my $fast_md5 = md5 $data;
		1745
		1746	=item IO::AIO::munmap $scalar
		1747
		1748	Removes a previous mmap and undefines the C<$scalar>.
		1749
		1750	=item IO::AIO::munlock $scalar, $offset = 0, $length = undef
		1751
		1752	Calls the C<munlock> function, undoing the effects of a previous
		1753	C<aio_mlock> call (see its description for details).
		1754
		1755	=item IO::AIO::munlockall
		1756
		1757	Calls the C<munlockall> function.
		1758
		1759	On systems that do not implement C<munlockall>, this function returns
		1760	ENOSYS, otherwise the return value of C<munlockall>.
		1761
		1762	=back
		1763
1251	=cut	1764	=cut
1252		1765
1253	# support function to convert a fd into a perl filehandle
1254	sub _fd2fh {
1255	return undef if $_[0] < 0;
1256
1257	# try to generate nice filehandles
1258	my $sym = "IO::AIO::fd#$_[0]";
1259	local *$sym;
1260
1261	open *$sym, "+<&=$_[0]" # usually works under any unix
1262	or open *$sym, "<&=$_[0]" # cygwin needs this
1263	or open *$sym, ">&=$_[0]" # or this
1264	or return undef;
1265
1266	*$sym
1267	}
1268
1269	min_parallel 8;	1766	min_parallel 8;
1270		1767
1271	END { flush }	1768	END { flush }
1272		1769
1273	1;	1770	1;
1274		1771
		1772	=head1 EVENT LOOP INTEGRATION
		1773
		1774	It is recommended to use L<AnyEvent::AIO> to integrate IO::AIO
		1775	automatically into many event loops:
		1776
		1777	# AnyEvent integration (EV, Event, Glib, Tk, POE, urxvt, pureperl...)
		1778	use AnyEvent::AIO;
		1779
		1780	You can also integrate IO::AIO manually into many event loops, here are
		1781	some examples of how to do this:
		1782
		1783	# EV integration
		1784	my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
		1785
		1786	# Event integration
		1787	Event->io (fd => IO::AIO::poll_fileno,
		1788	poll => 'r',
		1789	cb => \&IO::AIO::poll_cb);
		1790
		1791	# Glib/Gtk2 integration
		1792	add_watch Glib::IO IO::AIO::poll_fileno,
		1793	in => sub { IO::AIO::poll_cb; 1 };
		1794
		1795	# Tk integration
		1796	Tk::Event::IO->fileevent (IO::AIO::poll_fileno, "",
		1797	readable => \&IO::AIO::poll_cb);
		1798
		1799	# Danga::Socket integration
		1800	Danga::Socket->AddOtherFds (IO::AIO::poll_fileno =>
		1801	\&IO::AIO::poll_cb);
		1802
1275	=head2 FORK BEHAVIOUR	1803	=head2 FORK BEHAVIOUR
1276		1804
1277	This module should do "the right thing" when the process using it forks:	1805	Usage of pthreads in a program changes the semantics of fork
		1806	considerably. Specifically, only async-safe functions can be called after
		1807	fork. Perl doesn't know about this, so in general, you cannot call fork
		1808	with defined behaviour in perl. IO::AIO uses pthreads, so this applies,
		1809	but many other extensions and (for inexplicable reasons) perl itself often
		1810	is linked against pthreads, so this limitation applies.
1278		1811
1279	Before the fork, IO::AIO enters a quiescent state where no requests	1812	Some operating systems have extensions that allow safe use of fork, and
1280	can be added in other threads and no results will be processed. After	1813	this module should do "the right thing" on those, and tries on others. At
1281	the fork the parent simply leaves the quiescent state and continues	1814	the time of this writing (2011) only GNU/Linux supports these extensions
1282	request/result processing, while the child frees the request/result queue	1815	to POSIX.
1283	(so that the requests started before the fork will only be handled in the
1284	parent). Threads will be started on demand until the limit set in the
1285	parent process has been reached again.
1286
1287	In short: the parent will, after a short pause, continue as if fork had
1288	not been called, while the child will act as if IO::AIO has not been used
1289	yet.
1290		1816
1291	=head2 MEMORY USAGE	1817	=head2 MEMORY USAGE
1292		1818
1293	Per-request usage:	1819	Per-request usage:
1294		1820
…		…
1311		1837
1312	Known bugs will be fixed in the next release.	1838	Known bugs will be fixed in the next release.
1313		1839
1314	=head1 SEE ALSO	1840	=head1 SEE ALSO
1315		1841
1316	L<Coro::AIO>.	1842	L<AnyEvent::AIO> for easy integration into event loops, L<Coro::AIO> for a
		1843	more natural syntax.
1317		1844
1318	=head1 AUTHOR	1845	=head1 AUTHOR
1319		1846
1320	Marc Lehmann <schmorp@schmorp.de>	1847	Marc Lehmann <schmorp@schmorp.de>
1321	http://home.schmorp.de/	1848	http://home.schmorp.de/

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines