[ViewVC] Diff of: cvs/IO-AIO/AIO.pm

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.68 by root, Tue Oct 24 03:17:39 2006 UTC vs.
Revision 1.121 by root, Wed Apr 16 16:45:18 2008 UTC

…		…
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	use IO::AIO;	7	use IO::AIO;
8		8
9	aio_open "/etc/passwd", O_RDONLY, 0, sub {	9	aio_open "/etc/passwd", O_RDONLY, 0, sub {
10	my ($fh) = @_;	10	my $fh = shift
		11	or die "/etc/passwd: $!";
11	...	12	...
12	};	13	};
13		14
14	aio_unlink "/tmp/file", sub { };	15	aio_unlink "/tmp/file", sub { };
15		16
…		…
25	$req->cancel; # cancel request if still in queue	26	$req->cancel; # cancel request if still in queue
26		27
27	my $grp = aio_group sub { print "all stats done\n" };	28	my $grp = aio_group sub { print "all stats done\n" };
28	add $grp aio_stat "..." for ...;	29	add $grp aio_stat "..." for ...;
29		30
30	# AnyEvent integration	31	# AnyEvent integration (EV, Event, Glib, Tk, urxvt, pureperl...)
31	open my $fh, "<&=" . IO::AIO::poll_fileno or die "$!";	32	open my $fh, "<&=" . IO::AIO::poll_fileno or die "$!";
32	my $w = AnyEvent->io (fh => $fh, poll => 'r', cb => sub { IO::AIO::poll_cb });	33	my $w = AnyEvent->io (fh => $fh, poll => 'r', cb => sub { IO::AIO::poll_cb });
		34
		35	# EV integration
		36	my $w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
33		37
34	# Event integration	38	# Event integration
35	Event->io (fd => IO::AIO::poll_fileno,	39	Event->io (fd => IO::AIO::poll_fileno,
36	poll => 'r',	40	poll => 'r',
37	cb => \&IO::AIO::poll_cb);	41	cb => \&IO::AIO::poll_cb);
…		…
51	=head1 DESCRIPTION	55	=head1 DESCRIPTION
52		56
53	This module implements asynchronous I/O using whatever means your	57	This module implements asynchronous I/O using whatever means your
54	operating system supports.	58	operating system supports.
55		59
		60	Asynchronous means that operations that can normally block your program
		61	(e.g. reading from disk) will be done asynchronously: the operation
		62	will still block, but you can do something else in the meantime. This
		63	is extremely useful for programs that need to stay interactive even
		64	when doing heavy I/O (GUI programs, high performance network servers
		65	etc.), but can also be used to easily do operations in parallel that are
		66	normally done sequentially, e.g. stat'ing many files, which is much faster
		67	on a RAID volume or over NFS when you do a number of stat operations
		68	concurrently.
		69
		70	While most of this works on all types of file descriptors (for
		71	example sockets), using these functions on file descriptors that
		72	support nonblocking operation (again, sockets, pipes etc.) is very
		73	inefficient. Use an event loop for that (such as the L<Event\|Event>
		74	module): IO::AIO will naturally fit into such an event loop itself.
		75
56	Currently, a number of threads are started that execute your read/writes	76	In this version, a number of threads are started that execute your
57	and signal their completion. You don't need thread support in perl, and	77	requests and signal their completion. You don't need thread support
58	the threads created by this module will not be visible to perl. In the	78	in perl, and the threads created by this module will not be visible
59	future, this module might make use of the native aio functions available	79	to perl. In the future, this module might make use of the native aio
60	on many operating systems. However, they are often not well-supported	80	functions available on many operating systems. However, they are often
61	(Linux doesn't allow them on normal files currently, for example),	81	not well-supported or restricted (GNU/Linux doesn't allow them on normal
62	and they would only support aio_read and aio_write, so the remaining	82	files currently, for example), and they would only support aio_read and
63	functionality would have to be implemented using threads anyway.	83	aio_write, so the remaining functionality would have to be implemented
		84	using threads anyway.
64		85
65	Although the module will work with in the presence of other threads,	86	Although the module will work in the presence of other (Perl-) threads,
66	it is currently not reentrant in any way, so use appropriate locking	87	it is currently not reentrant in any way, so use appropriate locking
67	yourself, always call C<poll_cb> from within the same thread, or never	88	yourself, always call C<poll_cb> from within the same thread, or never
68	call C<poll_cb> (or other C<aio_> functions) recursively.	89	call C<poll_cb> (or other C<aio_> functions) recursively.
69		90
		91	=head2 EXAMPLE
		92
		93	This is a simple example that uses the Event module and loads
		94	F</etc/passwd> asynchronously:
		95
		96	use Fcntl;
		97	use Event;
		98	use IO::AIO;
		99
		100	# register the IO::AIO callback with Event
		101	Event->io (fd => IO::AIO::poll_fileno,
		102	poll => 'r',
		103	cb => \&IO::AIO::poll_cb);
		104
		105	# queue the request to open /etc/passwd
		106	aio_open "/etc/passwd", O_RDONLY, 0, sub {
		107	my $fh = shift
		108	or die "error while opening: $!";
		109
		110	# stat'ing filehandles is generally non-blocking
		111	my $size = -s $fh;
		112
		113	# queue a request to read the file
		114	my $contents;
		115	aio_read $fh, 0, $size, $contents, 0, sub {
		116	$_[0] == $size
		117	or die "short read: $!";
		118
		119	close $fh;
		120
		121	# file contents now in $contents
		122	print $contents;
		123
		124	# exit event loop and program
		125	Event::unloop;
		126	};
		127	};
		128
		129	# possibly queue up other requests, or open GUI windows,
		130	# check for sockets etc. etc.
		131
		132	# process events as long as there are some:
		133	Event::loop;
		134
		135	=head1 REQUEST ANATOMY AND LIFETIME
		136
		137	Every C<aio_*> function creates a request. which is a C data structure not
		138	directly visible to Perl.
		139
		140	If called in non-void context, every request function returns a Perl
		141	object representing the request. In void context, nothing is returned,
		142	which saves a bit of memory.
		143
		144	The perl object is a fairly standard ref-to-hash object. The hash contents
		145	are not used by IO::AIO so you are free to store anything you like in it.
		146
		147	During their existance, aio requests travel through the following states,
		148	in order:
		149
		150	=over 4
		151
		152	=item ready
		153
		154	Immediately after a request is created it is put into the ready state,
		155	waiting for a thread to execute it.
		156
		157	=item execute
		158
		159	A thread has accepted the request for processing and is currently
		160	executing it (e.g. blocking in read).
		161
		162	=item pending
		163
		164	The request has been executed and is waiting for result processing.
		165
		166	While request submission and execution is fully asynchronous, result
		167	processing is not and relies on the perl interpreter calling C<poll_cb>
		168	(or another function with the same effect).
		169
		170	=item result
		171
		172	The request results are processed synchronously by C<poll_cb>.
		173
		174	The C<poll_cb> function will process all outstanding aio requests by
		175	calling their callbacks, freeing memory associated with them and managing
		176	any groups they are contained in.
		177
		178	=item done
		179
		180	Request has reached the end of its lifetime and holds no resources anymore
		181	(except possibly for the Perl object, but its connection to the actual
		182	aio request is severed and calling its methods will either do nothing or
		183	result in a runtime error).
		184
		185	=back
		186
70	=cut	187	=cut
71		188
72	package IO::AIO;	189	package IO::AIO;
		190
		191	use Carp ();
73		192
74	no warnings;	193	no warnings;
75	use strict 'vars';	194	use strict 'vars';
76		195
77	use base 'Exporter';	196	use base 'Exporter';
78		197
79	BEGIN {	198	BEGIN {
80	our $VERSION = '2.0';	199	our $VERSION = '2.61';
81		200
82	our @AIO_REQ = qw(aio_sendfile aio_read aio_write aio_open aio_close aio_stat	201	our @AIO_REQ = qw(aio_sendfile aio_read aio_write aio_open aio_close
83	aio_lstat aio_unlink aio_rmdir aio_readdir aio_scandir aio_symlink	202	aio_stat aio_lstat aio_unlink aio_rmdir aio_readdir
84	aio_fsync aio_fdatasync aio_readahead aio_rename aio_link aio_move	203	aio_scandir aio_symlink aio_readlink aio_sync aio_fsync
85	aio_group aio_nop);	204	aio_fdatasync aio_pathsync aio_readahead
		205	aio_rename aio_link aio_move aio_copy aio_group
		206	aio_nop aio_mknod aio_load aio_rmtree aio_mkdir aio_chown
		207	aio_chmod aio_utime aio_truncate);
		208
86	our @EXPORT = (@AIO_REQ, qw(aioreq_pri));	209	our @EXPORT = (@AIO_REQ, qw(aioreq_pri aioreq_nice aio_block));
87	our @EXPORT_OK = qw(poll_fileno poll_cb poll_wait flush	210	our @EXPORT_OK = qw(poll_fileno poll_cb poll_wait flush
88	min_parallel max_parallel max_outstanding nreqs);	211	min_parallel max_parallel max_idle
		212	nreqs nready npending nthreads
		213	max_poll_time max_poll_reqs);
89		214
90	@IO::AIO::GRP::ISA = 'IO::AIO::REQ';	215	@IO::AIO::GRP::ISA = 'IO::AIO::REQ';
91		216
92	require XSLoader;	217	require XSLoader;
93	XSLoader::load ("IO::AIO", $VERSION);	218	XSLoader::load ("IO::AIO", $VERSION);
94	}	219	}
95		220
96	=head1 FUNCTIONS	221	=head1 FUNCTIONS
97		222
98	=head2 AIO FUNCTIONS	223	=head2 AIO REQUEST FUNCTIONS
99		224
100	All the C<aio_*> calls are more or less thin wrappers around the syscall	225	All the C<aio_*> calls are more or less thin wrappers around the syscall
101	with the same name (sans C<aio_>). The arguments are similar or identical,	226	with the same name (sans C<aio_>). The arguments are similar or identical,
102	and they all accept an additional (and optional) C<$callback> argument	227	and they all accept an additional (and optional) C<$callback> argument
103	which must be a code reference. This code reference will get called with	228	which must be a code reference. This code reference will get called with
…		…
106	syscall has been executed asynchronously.	231	syscall has been executed asynchronously.
107		232
108	All functions expecting a filehandle keep a copy of the filehandle	233	All functions expecting a filehandle keep a copy of the filehandle
109	internally until the request has finished.	234	internally until the request has finished.
110		235
111	All requests return objects of type L<IO::AIO::REQ> that allow further	236	All functions return request objects of type L<IO::AIO::REQ> that allow
112	manipulation of those requests while they are in-flight.	237	further manipulation of those requests while they are in-flight.
113		238
114	The pathnames you pass to these routines I<must> be absolute and	239	The pathnames you pass to these routines I<must> be absolute and
115	encoded in byte form. The reason for the former is that at the time the	240	encoded as octets. The reason for the former is that at the time the
116	request is being executed, the current working directory could have	241	request is being executed, the current working directory could have
117	changed. Alternatively, you can make sure that you never change the	242	changed. Alternatively, you can make sure that you never change the
118	current working directory.	243	current working directory anywhere in the program and then use relative
		244	paths.
119		245
120	To encode pathnames to byte form, either make sure you either: a)	246	To encode pathnames as octets, either make sure you either: a) always pass
121	always pass in filenames you got from outside (command line, readdir	247	in filenames you got from outside (command line, readdir etc.) without
122	etc.), b) are ASCII or ISO 8859-1, c) use the Encode module and encode	248	tinkering, b) are ASCII or ISO 8859-1, c) use the Encode module and encode
123	your pathnames to the locale (or other) encoding in effect in the user	249	your pathnames to the locale (or other) encoding in effect in the user
124	environment, d) use Glib::filename_from_unicode on unicode filenames or e)	250	environment, d) use Glib::filename_from_unicode on unicode filenames or e)
125	use something else.	251	use something else to ensure your scalar has the correct contents.
		252
		253	This works, btw. independent of the internal UTF-8 bit, which IO::AIO
		254	handles correctly wether it is set or not.
126		255
127	=over 4	256	=over 4
128		257
129	=item aioreq_pri $pri	258	=item $prev_pri = aioreq_pri [$pri]
130		259
131	Sets the priority for the next aio request. The default priority	260	Returns the priority value that would be used for the next request and, if
		261	C<$pri> is given, sets the priority for the next aio request.
		262
132	is C<0>, the minimum and maximum priorities are C<-4> and C<4>,	263	The default priority is C<0>, the minimum and maximum priorities are C<-4>
133	respectively. Requests with higher priority will be serviced first.	264	and C<4>, respectively. Requests with higher priority will be serviced
		265	first.
134		266
135	The priority will be reset to C<0> after each call to one of the C<aio_>	267	The priority will be reset to C<0> after each call to one of the C<aio_*>
136	functions.	268	functions.
		269
		270	Example: open a file with low priority, then read something from it with
		271	higher priority so the read request is serviced before other low priority
		272	open requests (potentially spamming the cache):
		273
		274	aioreq_pri -3;
		275	aio_open ..., sub {
		276	return unless $_[0];
		277
		278	aioreq_pri -2;
		279	aio_read $_[0], ..., sub {
		280	...
		281	};
		282	};
		283
		284
		285	=item aioreq_nice $pri_adjust
		286
		287	Similar to C<aioreq_pri>, but subtracts the given value from the current
		288	priority, so the effect is cumulative.
		289
137		290
138	=item aio_open $pathname, $flags, $mode, $callback->($fh)	291	=item aio_open $pathname, $flags, $mode, $callback->($fh)
139		292
140	Asynchronously open or create a file and call the callback with a newly	293	Asynchronously open or create a file and call the callback with a newly
141	created filehandle for the file.	294	created filehandle for the file.
…		…
147	list. They are the same as used by C<sysopen>.	300	list. They are the same as used by C<sysopen>.
148		301
149	Likewise, C<$mode> specifies the mode of the newly created file, if it	302	Likewise, C<$mode> specifies the mode of the newly created file, if it
150	didn't exist and C<O_CREAT> has been given, just like perl's C<sysopen>,	303	didn't exist and C<O_CREAT> has been given, just like perl's C<sysopen>,
151	except that it is mandatory (i.e. use C<0> if you don't create new files,	304	except that it is mandatory (i.e. use C<0> if you don't create new files,
152	and C<0666> or C<0777> if you do).	305	and C<0666> or C<0777> if you do). Note that the C<$mode> will be modified
		306	by the umask in effect then the request is being executed, so better never
		307	change the umask.
153		308
154	Example:	309	Example:
155		310
156	aio_open "/etc/passwd", O_RDONLY, 0, sub {	311	aio_open "/etc/passwd", O_RDONLY, 0, sub {
157	if ($_[0]) {	312	if ($_[0]) {
…		…
160	} else {	315	} else {
161	die "open failed: $!\n";	316	die "open failed: $!\n";
162	}	317	}
163	};	318	};
164		319
		320
165	=item aio_close $fh, $callback->($status)	321	=item aio_close $fh, $callback->($status)
166		322
167	Asynchronously close a file and call the callback with the result	323	Asynchronously close a file and call the callback with the result
168	code. I<WARNING:> although accepted, you should not pass in a perl	324	code.
169	filehandle here, as perl will likely close the file descriptor another
170	time when the filehandle is destroyed. Normally, you can safely call perls
171	C<close> or just let filehandles go out of scope.
172		325
173	This is supposed to be a bug in the API, so that might change. It's	326	Unfortunately, you can't do this to perl. Perl I<insists> very strongly on
174	therefore best to avoid this function.	327	closing the file descriptor associated with the filehandle itself.
		328
		329	Therefore, C<aio_close> will not close the filehandle - instead it will
		330	use dup2 to overwrite the file descriptor with the write-end of a pipe
		331	(the pipe fd will be created on demand and will be cached).
		332
		333	Or in other words: the file descriptor will be closed, but it will not be
		334	free for reuse until the perl filehandle is closed.
		335
		336	=cut
175		337
176	=item aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)	338	=item aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
177		339
178	=item aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)	340	=item aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
179		341
180	Reads or writes C<length> bytes from the specified C<fh> and C<offset>	342	Reads or writes C<$length> bytes from the specified C<$fh> and C<$offset>
181	into the scalar given by C<data> and offset C<dataoffset> and calls the	343	into the scalar given by C<$data> and offset C<$dataoffset> and calls the
182	callback without the actual number of bytes read (or -1 on error, just	344	callback without the actual number of bytes read (or -1 on error, just
183	like the syscall).	345	like the syscall).
184		346
		347	If C<$offset> is undefined, then the current file descriptor offset will
		348	be used (and updated), otherwise the file descriptor offset will not be
		349	changed by these calls.
		350
		351	If C<$length> is undefined in C<aio_write>, use the remaining length of C<$data>.
		352
		353	If C<$dataoffset> is less than zero, it will be counted from the end of
		354	C<$data>.
		355
185	The C<$data> scalar I<MUST NOT> be modified in any way while the request	356	The C<$data> scalar I<MUST NOT> be modified in any way while the request
186	is outstanding. Modifying it can result in segfaults or WW3 (if the	357	is outstanding. Modifying it can result in segfaults or World War III (if
187	necessary/optional hardware is installed).	358	the necessary/optional hardware is installed).
188		359
189	Example: Read 15 bytes at offset 7 into scalar C<$buffer>, starting at	360	Example: Read 15 bytes at offset 7 into scalar C<$buffer>, starting at
190	offset C<0> within the scalar:	361	offset C<0> within the scalar:
191		362
192	aio_read $fh, 7, 15, $buffer, 0, sub {	363	aio_read $fh, 7, 15, $buffer, 0, sub {
193	$_[0] > 0 or die "read error: $!";	364	$_[0] > 0 or die "read error: $!";
194	print "read $_[0] bytes: <$buffer>\n";	365	print "read $_[0] bytes: <$buffer>\n";
195	};	366	};
196		367
197	=item aio_move $srcpath, $dstpath, $callback->($status)
198
199	[EXPERIMENTAL due to internal aio_group use]
200
201	Try to move the I<file> (directories not supported as either source or
202	destination) from C<$srcpath> to C<$dstpath> and call the callback with
203	the C<0> (error) or C<-1> ok.
204
205	This is a composite request that tries to rename(2) the file first. If
206	rename files with C<EXDEV>, it creates the destination file with mode 0200
207	and copies the contents of the source file into it using C<aio_sendfile>,
208	followed by restoring atime, mtime, access mode and uid/gid, in that
209	order, and unlinking the C<$srcpath>.
210
211	If an error occurs, the partial destination file will be unlinked, if
212	possible, except when setting atime, mtime, access mode and uid/gid, where
213	errors are being ignored.
214
215	=cut
216
217	sub aio_move($$$) {
218	my ($src, $dst, $cb) = @_;
219
220	my $grp = aio_group $cb;
221
222	add $grp aio_rename $src, $dst, sub {
223	if ($_[0] && $! == EXDEV) {
224	add $grp aio_open $src, O_RDONLY, 0, sub {
225	if (my $src_fh = $_[0]) {
226	my @stat = stat $src_fh;
227
228	add $grp aio_open $dst, O_WRONLY, 0200, sub {
229	if (my $dst_fh = $_[0]) {
230	add $grp aio_sendfile $dst_fh, $src_fh, 0, $stat[7], sub {
231	close $src_fh;
232
233	if ($_[0] == $stat[7]) {
234	utime $stat[8], $stat[9], $dst;
235	chmod $stat[2] & 07777, $dst_fh;
236	chown $stat[4], $stat[5], $dst_fh;
237	close $dst_fh;
238
239	add $grp aio_unlink $src, sub {
240	$grp->result ($_[0]);
241	};
242	} else {
243	my $errno = $!;
244	add $grp aio_unlink $dst, sub {
245	$! = $errno;
246	$grp->result (-1);
247	};
248	}
249	};
250	} else {
251	$grp->result (-1);
252	}
253	},
254
255	} else {
256	$grp->result (-1);
257	}
258	};
259	} else {
260	$grp->result ($_[0]);
261	}
262	};
263
264	$grp
265	}
266		368
267	=item aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval)	369	=item aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval)
268		370
269	Tries to copy C<$length> bytes from C<$in_fh> to C<$out_fh>. It starts	371	Tries to copy C<$length> bytes from C<$in_fh> to C<$out_fh>. It starts
270	reading at byte offset C<$in_offset>, and starts writing at the current	372	reading at byte offset C<$in_offset>, and starts writing at the current
…		…
284	C<$in_fh> than are written, and there is no way to find out how many	386	C<$in_fh> than are written, and there is no way to find out how many
285	bytes have been read from C<aio_sendfile> alone, as C<aio_sendfile> only	387	bytes have been read from C<aio_sendfile> alone, as C<aio_sendfile> only
286	provides the number of bytes written to C<$out_fh>. Only if the result	388	provides the number of bytes written to C<$out_fh>. Only if the result
287	value equals C<$length> one can assume that C<$length> bytes have been	389	value equals C<$length> one can assume that C<$length> bytes have been
288	read.	390	read.
		391
289		392
290	=item aio_readahead $fh,$offset,$length, $callback->($retval)	393	=item aio_readahead $fh,$offset,$length, $callback->($retval)
291		394
292	C<aio_readahead> populates the page cache with data from a file so that	395	C<aio_readahead> populates the page cache with data from a file so that
293	subsequent reads from that file will not block on disk I/O. The C<$offset>	396	subsequent reads from that file will not block on disk I/O. The C<$offset>
…		…
299	file. The current file offset of the file is left unchanged.	402	file. The current file offset of the file is left unchanged.
300		403
301	If that syscall doesn't exist (likely if your OS isn't Linux) it will be	404	If that syscall doesn't exist (likely if your OS isn't Linux) it will be
302	emulated by simply reading the data, which would have a similar effect.	405	emulated by simply reading the data, which would have a similar effect.
303		406
		407
304	=item aio_stat $fh_or_path, $callback->($status)	408	=item aio_stat $fh_or_path, $callback->($status)
305		409
306	=item aio_lstat $fh, $callback->($status)	410	=item aio_lstat $fh, $callback->($status)
307		411
308	Works like perl's C<stat> or C<lstat> in void context. The callback will	412	Works like perl's C<stat> or C<lstat> in void context. The callback will
…		…
321	aio_stat "/etc/passwd", sub {	425	aio_stat "/etc/passwd", sub {
322	$_[0] and die "stat failed: $!";	426	$_[0] and die "stat failed: $!";
323	print "size is ", -s _, "\n";	427	print "size is ", -s _, "\n";
324	};	428	};
325		429
		430
		431	=item aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
		432
		433	Works like perl's C<utime> function (including the special case of $atime
		434	and $mtime being undef). Fractional times are supported if the underlying
		435	syscalls support them.
		436
		437	When called with a pathname, uses utimes(2) if available, otherwise
		438	utime(2). If called on a file descriptor, uses futimes(2) if available,
		439	otherwise returns ENOSYS, so this is not portable.
		440
		441	Examples:
		442
		443	# set atime and mtime to current time (basically touch(1)):
		444	aio_utime "path", undef, undef;
		445	# set atime to current time and mtime to beginning of the epoch:
		446	aio_utime "path", time, undef; # undef==0
		447
		448
		449	=item aio_chown $fh_or_path, $uid, $gid, $callback->($status)
		450
		451	Works like perl's C<chown> function, except that C<undef> for either $uid
		452	or $gid is being interpreted as "do not change" (but -1 can also be used).
		453
		454	Examples:
		455
		456	# same as "chown root path" in the shell:
		457	aio_chown "path", 0, -1;
		458	# same as above:
		459	aio_chown "path", 0, undef;
		460
		461
		462	=item aio_truncate $fh_or_path, $offset, $callback->($status)
		463
		464	Works like truncate(2) or ftruncate(2).
		465
		466
		467	=item aio_chmod $fh_or_path, $mode, $callback->($status)
		468
		469	Works like perl's C<chmod> function.
		470
		471
326	=item aio_unlink $pathname, $callback->($status)	472	=item aio_unlink $pathname, $callback->($status)
327		473
328	Asynchronously unlink (delete) a file and call the callback with the	474	Asynchronously unlink (delete) a file and call the callback with the
329	result code.	475	result code.
330		476
		477
		478	=item aio_mknod $path, $mode, $dev, $callback->($status)
		479
		480	[EXPERIMENTAL]
		481
		482	Asynchronously create a device node (or fifo). See mknod(2).
		483
		484	The only (POSIX-) portable way of calling this function is:
		485
		486	aio_mknod $path, IO::AIO::S_IFIFO \| $mode, 0, sub { ...
		487
		488
331	=item aio_link $srcpath, $dstpath, $callback->($status)	489	=item aio_link $srcpath, $dstpath, $callback->($status)
332		490
333	Asynchronously create a new link to the existing object at C<$srcpath> at	491	Asynchronously create a new link to the existing object at C<$srcpath> at
334	the path C<$dstpath> and call the callback with the result code.	492	the path C<$dstpath> and call the callback with the result code.
335		493
		494
336	=item aio_symlink $srcpath, $dstpath, $callback->($status)	495	=item aio_symlink $srcpath, $dstpath, $callback->($status)
337		496
338	Asynchronously create a new symbolic link to the existing object at C<$srcpath> at	497	Asynchronously create a new symbolic link to the existing object at C<$srcpath> at
339	the path C<$dstpath> and call the callback with the result code.	498	the path C<$dstpath> and call the callback with the result code.
340		499
		500
		501	=item aio_readlink $path, $callback->($link)
		502
		503	Asynchronously read the symlink specified by C<$path> and pass it to
		504	the callback. If an error occurs, nothing or undef gets passed to the
		505	callback.
		506
		507
341	=item aio_rename $srcpath, $dstpath, $callback->($status)	508	=item aio_rename $srcpath, $dstpath, $callback->($status)
342		509
343	Asynchronously rename the object at C<$srcpath> to C<$dstpath>, just as	510	Asynchronously rename the object at C<$srcpath> to C<$dstpath>, just as
344	rename(2) and call the callback with the result code.	511	rename(2) and call the callback with the result code.
345		512
		513
		514	=item aio_mkdir $pathname, $mode, $callback->($status)
		515
		516	Asynchronously mkdir (create) a directory and call the callback with
		517	the result code. C<$mode> will be modified by the umask at the time the
		518	request is executed, so do not change your umask.
		519
		520
346	=item aio_rmdir $pathname, $callback->($status)	521	=item aio_rmdir $pathname, $callback->($status)
347		522
348	Asynchronously rmdir (delete) a directory and call the callback with the	523	Asynchronously rmdir (delete) a directory and call the callback with the
349	result code.	524	result code.
		525
350		526
351	=item aio_readdir $pathname, $callback->($entries)	527	=item aio_readdir $pathname, $callback->($entries)
352		528
353	Unlike the POSIX call of the same name, C<aio_readdir> reads an entire	529	Unlike the POSIX call of the same name, C<aio_readdir> reads an entire
354	directory (i.e. opendir + readdir + closedir). The entries will not be	530	directory (i.e. opendir + readdir + closedir). The entries will not be
355	sorted, and will B<NOT> include the C<.> and C<..> entries.	531	sorted, and will B<NOT> include the C<.> and C<..> entries.
356		532
357	The callback a single argument which is either C<undef> or an array-ref	533	The callback a single argument which is either C<undef> or an array-ref
358	with the filenames.	534	with the filenames.
359		535
		536
		537	=item aio_load $path, $data, $callback->($status)
		538
		539	This is a composite request that tries to fully load the given file into
		540	memory. Status is the same as with aio_read.
		541
		542	=cut
		543
		544	sub aio_load($$;$) {
		545	aio_block {
		546	my ($path, undef, $cb) = @_;
		547	my $data = \$_[1];
		548
		549	my $pri = aioreq_pri;
		550	my $grp = aio_group $cb;
		551
		552	aioreq_pri $pri;
		553	add $grp aio_open $path, O_RDONLY, 0, sub {
		554	my $fh = shift
		555	or return $grp->result (-1);
		556
		557	aioreq_pri $pri;
		558	add $grp aio_read $fh, 0, (-s $fh), $$data, 0, sub {
		559	$grp->result ($_[0]);
		560	};
		561	};
		562
		563	$grp
		564	}
		565	}
		566
		567	=item aio_copy $srcpath, $dstpath, $callback->($status)
		568
		569	Try to copy the I<file> (directories not supported as either source or
		570	destination) from C<$srcpath> to C<$dstpath> and call the callback with
		571	the C<0> (error) or C<-1> ok.
		572
		573	This is a composite request that it creates the destination file with
		574	mode 0200 and copies the contents of the source file into it using
		575	C<aio_sendfile>, followed by restoring atime, mtime, access mode and
		576	uid/gid, in that order.
		577
		578	If an error occurs, the partial destination file will be unlinked, if
		579	possible, except when setting atime, mtime, access mode and uid/gid, where
		580	errors are being ignored.
		581
		582	=cut
		583
		584	sub aio_copy($$;$) {
		585	aio_block {
		586	my ($src, $dst, $cb) = @_;
		587
		588	my $pri = aioreq_pri;
		589	my $grp = aio_group $cb;
		590
		591	aioreq_pri $pri;
		592	add $grp aio_open $src, O_RDONLY, 0, sub {
		593	if (my $src_fh = $_[0]) {
		594	my @stat = stat $src_fh;
		595
		596	aioreq_pri $pri;
		597	add $grp aio_open $dst, O_CREAT \| O_WRONLY \| O_TRUNC, 0200, sub {
		598	if (my $dst_fh = $_[0]) {
		599	aioreq_pri $pri;
		600	add $grp aio_sendfile $dst_fh, $src_fh, 0, $stat[7], sub {
		601	if ($_[0] == $stat[7]) {
		602	$grp->result (0);
		603	close $src_fh;
		604
		605	# those should not normally block. should. should.
		606	utime $stat[8], $stat[9], $dst;
		607	chmod $stat[2] & 07777, $dst_fh;
		608	chown $stat[4], $stat[5], $dst_fh;
		609
		610	aioreq_pri $pri;
		611	add $grp aio_close $dst_fh;
		612	} else {
		613	$grp->result (-1);
		614	close $src_fh;
		615	close $dst_fh;
		616
		617	aioreq $pri;
		618	add $grp aio_unlink $dst;
		619	}
		620	};
		621	} else {
		622	$grp->result (-1);
		623	}
		624	},
		625
		626	} else {
		627	$grp->result (-1);
		628	}
		629	};
		630
		631	$grp
		632	}
		633	}
		634
		635	=item aio_move $srcpath, $dstpath, $callback->($status)
		636
		637	Try to move the I<file> (directories not supported as either source or
		638	destination) from C<$srcpath> to C<$dstpath> and call the callback with
		639	the C<0> (error) or C<-1> ok.
		640
		641	This is a composite request that tries to rename(2) the file first. If
		642	rename files with C<EXDEV>, it copies the file with C<aio_copy> and, if
		643	that is successful, unlinking the C<$srcpath>.
		644
		645	=cut
		646
		647	sub aio_move($$;$) {
		648	aio_block {
		649	my ($src, $dst, $cb) = @_;
		650
		651	my $pri = aioreq_pri;
		652	my $grp = aio_group $cb;
		653
		654	aioreq_pri $pri;
		655	add $grp aio_rename $src, $dst, sub {
		656	if ($_[0] && $! == EXDEV) {
		657	aioreq_pri $pri;
		658	add $grp aio_copy $src, $dst, sub {
		659	$grp->result ($_[0]);
		660
		661	if (!$_[0]) {
		662	aioreq_pri $pri;
		663	add $grp aio_unlink $src;
		664	}
		665	};
		666	} else {
		667	$grp->result ($_[0]);
		668	}
		669	};
		670
		671	$grp
		672	}
		673	}
		674
360	=item aio_scandir $path, $maxreq, $callback->($dirs, $nondirs)	675	=item aio_scandir $path, $maxreq, $callback->($dirs, $nondirs)
361		676
362	[EXPERIMENTAL due to internal aio_group use]
363
364	Scans a directory (similar to C<aio_readdir>) but additionally tries to	677	Scans a directory (similar to C<aio_readdir>) but additionally tries to
365	separate the entries of directory C<$path> into two sets of names, ones	678	efficiently separate the entries of directory C<$path> into two sets of
366	you can recurse into (directories or links to them), and ones you cannot	679	names, directories you can recurse into (directories), and ones you cannot
367	recurse into (everything else).	680	recurse into (everything else, including symlinks to directories).
368		681
369	C<aio_scandir> is a composite request that creates of many sub requests_	682	C<aio_scandir> is a composite request that creates of many sub requests_
370	C<$maxreq> specifies the maximum number of outstanding aio requests that	683	C<$maxreq> specifies the maximum number of outstanding aio requests that
371	this function generates. If it is C<< <= 0 >>, then a suitable default	684	this function generates. If it is C<< <= 0 >>, then a suitable default
372	will be chosen (currently 6).	685	will be chosen (currently 4).
373		686
374	On error, the callback is called without arguments, otherwise it receives	687	On error, the callback is called without arguments, otherwise it receives
375	two array-refs with path-relative entry names.	688	two array-refs with path-relative entry names.
376		689
377	Example:	690	Example:
…		…
411	as those tend to return 0 or 1 as link counts, which disables the	724	as those tend to return 0 or 1 as link counts, which disables the
412	directory counting heuristic.	725	directory counting heuristic.
413		726
414	=cut	727	=cut
415		728
416	sub aio_scandir($$$) {	729	sub aio_scandir($$;$) {
		730	aio_block {
417	my ($path, $maxreq, $cb) = @_;	731	my ($path, $maxreq, $cb) = @_;
418		732
		733	my $pri = aioreq_pri;
		734
419	my $grp = aio_group $cb;	735	my $grp = aio_group $cb;
420		736
421	$maxreq = 6 if $maxreq <= 0;	737	$maxreq = 4 if $maxreq <= 0;
422		738
423	# stat once	739	# stat once
		740	aioreq_pri $pri;
424	add $grp aio_stat $path, sub {	741	add $grp aio_stat $path, sub {
425	return $grp->result () if $_[0];	742	return $grp->result () if $_[0];
426	my $now = time;	743	my $now = time;
427	my $hash1 = join ":", (stat _)[0,1,3,7,9];	744	my $hash1 = join ":", (stat _)[0,1,3,7,9];
428		745
429	# read the directory entries	746	# read the directory entries
		747	aioreq_pri $pri;
430	add $grp aio_readdir $path, sub {	748	add $grp aio_readdir $path, sub {
431	my $entries = shift	749	my $entries = shift
432	or return $grp->result ();	750	or return $grp->result ();
433		751
434	# stat the dir another time	752	# stat the dir another time
		753	aioreq_pri $pri;
435	add $grp aio_stat $path, sub {	754	add $grp aio_stat $path, sub {
436	my $hash2 = join ":", (stat _)[0,1,3,7,9];	755	my $hash2 = join ":", (stat _)[0,1,3,7,9];
437		756
438	my $ndirs;	757	my $ndirs;
439		758
440	# take the slow route if anything looks fishy	759	# take the slow route if anything looks fishy
441	if ($hash1 ne $hash2 or (stat _)[9] == $now) {	760	if ($hash1 ne $hash2 or (stat _)[9] == $now) {
442	$ndirs = -1;	761	$ndirs = -1;
443	} else {	762	} else {
444	# if nlink == 2, we are finished	763	# if nlink == 2, we are finished
445	# on non-posix-fs's, we rely on nlink < 2	764	# on non-posix-fs's, we rely on nlink < 2
446	$ndirs = (stat _)[3] - 2	765	$ndirs = (stat _)[3] - 2
447	or return $grp->result ([], $entries);	766	or return $grp->result ([], $entries);
448	}	767	}
449		768
450	# sort into likely dirs and likely nondirs	769	# sort into likely dirs and likely nondirs
451	# dirs == files without ".", short entries first	770	# dirs == files without ".", short entries first
452	$entries = [map $_->[0],	771	$entries = [map $_->[0],
453	sort { $b->[1] cmp $a->[1] }	772	sort { $b->[1] cmp $a->[1] }
454	map [$_, sprintf "%s%04d", (/.\./ ? "1" : "0"), length],	773	map [$_, sprintf "%s%04d", (/.\./ ? "1" : "0"), length],
455	@$entries];	774	@$entries];
456		775
457	my (@dirs, @nondirs);	776	my (@dirs, @nondirs);
458		777
459	my ($statcb, $schedcb);
460	my $nreq = 0;
461
462	my $statgrp = add $grp aio_group;	778	my $statgrp = add $grp aio_group sub {
463
464	$schedcb = sub {
465	if (@$entries) {
466	if ($nreq < $maxreq) {
467	my $ent = pop @$entries;
468	$nreq++;
469	add $statgrp aio_stat "$path/$ent/.", sub { $statcb->($_[0], $ent) };
470	}
471	} elsif (!$nreq) {
472	# finished
473	$statgrp->cancel;
474	undef $statcb;
475	undef $schedcb;
476	$grp->result (\@dirs, \@nondirs);	779	$grp->result (\@dirs, \@nondirs);
477	}	780	};
		781
		782	limit $statgrp $maxreq;
		783	feed $statgrp sub {
		784	return unless @$entries;
		785	my $entry = pop @$entries;
		786
		787	aioreq_pri $pri;
		788	add $statgrp aio_stat "$path/$entry/.", sub {
		789	if ($_[0] < 0) {
		790	push @nondirs, $entry;
		791	} else {
		792	# need to check for real directory
		793	aioreq_pri $pri;
		794	add $statgrp aio_lstat "$path/$entry", sub {
		795	if (-d _) {
		796	push @dirs, $entry;
		797
		798	unless (--$ndirs) {
		799	push @nondirs, @$entries;
		800	feed $statgrp;
		801	}
		802	} else {
		803	push @nondirs, $entry;
		804	}
		805	}
		806	}
		807	};
		808	};
478	};	809	};
479	$statcb = sub {
480	my ($status, $entry) = @_;
481
482	if ($status < 0) {
483	$nreq--;
484	push @nondirs, $entry;
485	&$schedcb;
486	} else {
487	# need to check for real directory
488	add $grp aio_lstat "$path/$entry", sub {
489	$nreq--;
490
491	if (-d _) {
492	push @dirs, $entry;
493
494	if (!--$ndirs) {
495	push @nondirs, @$entries;
496	$entries = [];
497	}
498	} else {
499	push @nondirs, $entry;
500	}
501
502	&$schedcb;
503	}
504	}
505	};
506
507	&$schedcb while @$entries && $nreq < $maxreq;
508	};	810	};
509	};	811	};
		812
		813	$grp
510	};	814	}
511
512	$grp
513	}	815	}
		816
		817	=item aio_rmtree $path, $callback->($status)
		818
		819	Delete a directory tree starting (and including) C<$path>, return the
		820	status of the final C<rmdir> only. This is a composite request that
		821	uses C<aio_scandir> to recurse into and rmdir directories, and unlink
		822	everything else.
		823
		824	=cut
		825
		826	sub aio_rmtree;
		827	sub aio_rmtree($;$) {
		828	aio_block {
		829	my ($path, $cb) = @_;
		830
		831	my $pri = aioreq_pri;
		832	my $grp = aio_group $cb;
		833
		834	aioreq_pri $pri;
		835	add $grp aio_scandir $path, 0, sub {
		836	my ($dirs, $nondirs) = @_;
		837
		838	my $dirgrp = aio_group sub {
		839	add $grp aio_rmdir $path, sub {
		840	$grp->result ($_[0]);
		841	};
		842	};
		843
		844	(aioreq_pri $pri), add $dirgrp aio_rmtree "$path/$_" for @$dirs;
		845	(aioreq_pri $pri), add $dirgrp aio_unlink "$path/$_" for @$nondirs;
		846
		847	add $grp $dirgrp;
		848	};
		849
		850	$grp
		851	}
		852	}
		853
		854	=item aio_sync $callback->($status)
		855
		856	Asynchronously call sync and call the callback when finished.
514		857
515	=item aio_fsync $fh, $callback->($status)	858	=item aio_fsync $fh, $callback->($status)
516		859
517	Asynchronously call fsync on the given filehandle and call the callback	860	Asynchronously call fsync on the given filehandle and call the callback
518	with the fsync result code.	861	with the fsync result code.
…		…
523	callback with the fdatasync result code.	866	callback with the fdatasync result code.
524		867
525	If this call isn't available because your OS lacks it or it couldn't be	868	If this call isn't available because your OS lacks it or it couldn't be
526	detected, it will be emulated by calling C<fsync> instead.	869	detected, it will be emulated by calling C<fsync> instead.
527		870
		871	=item aio_pathsync $path, $callback->($status)
		872
		873	This request tries to open, fsync and close the given path. This is a
		874	composite request intended tosync directories after directory operations
		875	(E.g. rename). This might not work on all operating systems or have any
		876	specific effect, but usually it makes sure that directory changes get
		877	written to disc. It works for anything that can be opened for read-only,
		878	not just directories.
		879
		880	Passes C<0> when everything went ok, and C<-1> on error.
		881
		882	=cut
		883
		884	sub aio_pathsync($;$) {
		885	aio_block {
		886	my ($path, $cb) = @_;
		887
		888	my $pri = aioreq_pri;
		889	my $grp = aio_group $cb;
		890
		891	aioreq_pri $pri;
		892	add $grp aio_open $path, O_RDONLY, 0, sub {
		893	my ($fh) = @_;
		894	if ($fh) {
		895	aioreq_pri $pri;
		896	add $grp aio_fsync $fh, sub {
		897	$grp->result ($_[0]);
		898
		899	aioreq_pri $pri;
		900	add $grp aio_close $fh;
		901	};
		902	} else {
		903	$grp->result (-1);
		904	}
		905	};
		906
		907	$grp
		908	}
		909	}
		910
528	=item aio_group $callback->(...)	911	=item aio_group $callback->(...)
529
530	[EXPERIMENTAL]
531		912
532	This is a very special aio request: Instead of doing something, it is a	913	This is a very special aio request: Instead of doing something, it is a
533	container for other aio requests, which is useful if you want to bundle	914	container for other aio requests, which is useful if you want to bundle
534	many requests into a single, composite, request.	915	many requests into a single, composite, request with a definite callback
		916	and the ability to cancel the whole request with its subrequests.
535		917
536	Returns an object of class L<IO::AIO::GRP>. See its documentation below	918	Returns an object of class L<IO::AIO::GRP>. See its documentation below
537	for more info.	919	for more info.
538		920
539	Example:	921	Example:
…		…
558	phase and still requires a worker thread. Thus, the callback will not	940	phase and still requires a worker thread. Thus, the callback will not
559	be executed immediately but only after other requests in the queue have	941	be executed immediately but only after other requests in the queue have
560	entered their execution phase. This can be used to measure request	942	entered their execution phase. This can be used to measure request
561	latency.	943	latency.
562		944
563	=item IO::AIO::aio_sleep $fractional_seconds, $callback->() NOT EXPORTED	945	=item IO::AIO::aio_busy $fractional_seconds, $callback->() NOT EXPORTED
564		946
565	Mainly used for debugging and benchmarking, this aio request puts one of	947	Mainly used for debugging and benchmarking, this aio request puts one of
566	the request workers to sleep for the given time.	948	the request workers to sleep for the given time.
567		949
568	While it is theoretically handy to have simple I/O scheduling requests	950	While it is theoretically handy to have simple I/O scheduling requests
569	like sleep and file handle readable/writable, the overhead this creates	951	like sleep and file handle readable/writable, the overhead this creates is
570	is immense, so do not use this function except to put your application	952	immense (it blocks a thread for a long time) so do not use this function
571	under artificial I/O pressure.	953	except to put your application under artificial I/O pressure.
572		954
573	=back	955	=back
574		956
575	=head2 IO::AIO::REQ CLASS	957	=head2 IO::AIO::REQ CLASS
576		958
577	All non-aggregate C<aio_*> functions return an object of this class when	959	All non-aggregate C<aio_*> functions return an object of this class when
578	called in non-void context.	960	called in non-void context.
579
580	A request always moves through the following five states in its lifetime,
581	in order: B<ready> (request has been created, but has not been executed
582	yet), B<execute> (request is currently being executed), B<pending>
583	(request has been executed but callback has not been called yet),
584	B<result> (results are being processed synchronously, includes calling the
585	callback) and B<done> (request has reached the end of its lifetime and
586	holds no resources anymore).
587		961
588	=over 4	962	=over 4
589		963
590	=item cancel $req	964	=item cancel $req
591		965
…		…
645	=item * They can also can also be added to other IO::AIO::GRP objects.	1019	=item * They can also can also be added to other IO::AIO::GRP objects.
646		1020
647	=item * You must not add requests to a group from within the group callback (or	1021	=item * You must not add requests to a group from within the group callback (or
648	any later time).	1022	any later time).
649		1023
650	=item * This does not harmonise well with C<max_outstanding>, so best do
651	not combine C<aio_group> with it. Groups and feeders are recommended for
652	this kind of concurrency-limiting.
653
654	=back	1024	=back
655		1025
656	Their lifetime, simplified, looks like this: when they are empty, they	1026	Their lifetime, simplified, looks like this: when they are empty, they
657	will finish very quickly. If they contain only requests that are in the	1027	will finish very quickly. If they contain only requests that are in the
658	C<done> state, they will also finish. Otherwise they will continue to	1028	C<done> state, they will also finish. Otherwise they will continue to
…		…
673	be added, including other groups, as long as you do not create circular	1043	be added, including other groups, as long as you do not create circular
674	dependencies.	1044	dependencies.
675		1045
676	Returns all its arguments.	1046	Returns all its arguments.
677		1047
		1048	=item $grp->cancel_subs
		1049
		1050	Cancel all subrequests and clears any feeder, but not the group request
		1051	itself. Useful when you queued a lot of events but got a result early.
		1052
678	=item $grp->result (...)	1053	=item $grp->result (...)
679		1054
680	Set the result value(s) that will be passed to the group callback when all	1055	Set the result value(s) that will be passed to the group callback when all
681	subrequests have finished. By default, no argument will be passed.	1056	subrequests have finished and set the groups errno to the current value
		1057	of errno (just like calling C<errno> without an error number). By default,
		1058	no argument will be passed and errno is zero.
		1059
		1060	=item $grp->errno ([$errno])
		1061
		1062	Sets the group errno value to C<$errno>, or the current value of errno
		1063	when the argument is missing.
		1064
		1065	Every aio request has an associated errno value that is restored when
		1066	the callback is invoked. This method lets you change this value from its
		1067	default (0).
		1068
		1069	Calling C<result> will also set errno, so make sure you either set C<$!>
		1070	before the call to C<result>, or call c<errno> after it.
682		1071
683	=item feed $grp $callback->($grp)	1072	=item feed $grp $callback->($grp)
684
685	[VERY EXPERIMENTAL]
686		1073
687	Sets a feeder/generator on this group: every group can have an attached	1074	Sets a feeder/generator on this group: every group can have an attached
688	generator that generates requests if idle. The idea behind this is that,	1075	generator that generates requests if idle. The idea behind this is that,
689	although you could just queue as many requests as you want in a group,	1076	although you could just queue as many requests as you want in a group,
690	this might starve other requests for a potentially long time. For	1077	this might starve other requests for a potentially long time. For
…		…
727		1114
728	=back	1115	=back
729		1116
730	=head2 SUPPORT FUNCTIONS	1117	=head2 SUPPORT FUNCTIONS
731		1118
		1119	=head3 EVENT PROCESSING AND EVENT LOOP INTEGRATION
		1120
732	=over 4	1121	=over 4
733		1122
734	=item $fileno = IO::AIO::poll_fileno	1123	=item $fileno = IO::AIO::poll_fileno
735		1124
736	Return the I<request result pipe file descriptor>. This filehandle must be	1125	Return the I<request result pipe file descriptor>. This filehandle must be
…		…
740		1129
741	See C<poll_cb> for an example.	1130	See C<poll_cb> for an example.
742		1131
743	=item IO::AIO::poll_cb	1132	=item IO::AIO::poll_cb
744		1133
745	Process all outstanding events on the result pipe. You have to call this	1134	Process some outstanding events on the result pipe. You have to call this
746	regularly. Returns the number of events processed. Returns immediately	1135	regularly. Returns the number of events processed. Returns immediately
747	when no events are outstanding.	1136	when no events are outstanding. The amount of events processed depends on
		1137	the settings of C<IO::AIO::max_poll_req> and C<IO::AIO::max_poll_time>.
		1138
		1139	If not all requests were processed for whatever reason, the filehandle
		1140	will still be ready when C<poll_cb> returns.
748		1141
749	Example: Install an Event watcher that automatically calls	1142	Example: Install an Event watcher that automatically calls
750	IO::AIO::poll_cb with high priority:	1143	IO::AIO::poll_cb with high priority:
751		1144
752	Event->io (fd => IO::AIO::poll_fileno,	1145	Event->io (fd => IO::AIO::poll_fileno,
753	poll => 'r', async => 1,	1146	poll => 'r', async => 1,
754	cb => \&IO::AIO::poll_cb);	1147	cb => \&IO::AIO::poll_cb);
755		1148
		1149	=item IO::AIO::max_poll_reqs $nreqs
		1150
		1151	=item IO::AIO::max_poll_time $seconds
		1152
		1153	These set the maximum number of requests (default C<0>, meaning infinity)
		1154	that are being processed by C<IO::AIO::poll_cb> in one call, respectively
		1155	the maximum amount of time (default C<0>, meaning infinity) spent in
		1156	C<IO::AIO::poll_cb> to process requests (more correctly the mininum amount
		1157	of time C<poll_cb> is allowed to use).
		1158
		1159	Setting C<max_poll_time> to a non-zero value creates an overhead of one
		1160	syscall per request processed, which is not normally a problem unless your
		1161	callbacks are really really fast or your OS is really really slow (I am
		1162	not mentioning Solaris here). Using C<max_poll_reqs> incurs no overhead.
		1163
		1164	Setting these is useful if you want to ensure some level of
		1165	interactiveness when perl is not fast enough to process all requests in
		1166	time.
		1167
		1168	For interactive programs, values such as C<0.01> to C<0.1> should be fine.
		1169
		1170	Example: Install an Event watcher that automatically calls
		1171	IO::AIO::poll_cb with low priority, to ensure that other parts of the
		1172	program get the CPU sometimes even under high AIO load.
		1173
		1174	# try not to spend much more than 0.1s in poll_cb
		1175	IO::AIO::max_poll_time 0.1;
		1176
		1177	# use a low priority so other tasks have priority
		1178	Event->io (fd => IO::AIO::poll_fileno,
		1179	poll => 'r', nice => 1,
		1180	cb => &IO::AIO::poll_cb);
		1181
756	=item IO::AIO::poll_wait	1182	=item IO::AIO::poll_wait
757		1183
		1184	If there are any outstanding requests and none of them in the result
758	Wait till the result filehandle becomes ready for reading (simply does a	1185	phase, wait till the result filehandle becomes ready for reading (simply
759	C<select> on the filehandle. This is useful if you want to synchronously wait	1186	does a C<select> on the filehandle. This is useful if you want to
760	for some requests to finish).	1187	synchronously wait for some requests to finish).
761		1188
762	See C<nreqs> for an example.	1189	See C<nreqs> for an example.
763		1190
		1191	=item IO::AIO::poll
		1192
		1193	Waits until some requests have been handled.
		1194
		1195	Returns the number of requests processed, but is otherwise strictly
		1196	equivalent to:
		1197
		1198	IO::AIO::poll_wait, IO::AIO::poll_cb
		1199
764	=item IO::AIO::nreqs	1200	=item IO::AIO::flush
765		1201
766	Returns the number of requests currently outstanding (i.e. for which their	1202	Wait till all outstanding AIO requests have been handled.
767	callback has not been invoked yet).
768		1203
769	Example: wait till there are no outstanding requests anymore:	1204	Strictly equivalent to:
770		1205
771	IO::AIO::poll_wait, IO::AIO::poll_cb	1206	IO::AIO::poll_wait, IO::AIO::poll_cb
772	while IO::AIO::nreqs;	1207	while IO::AIO::nreqs;
773		1208
774	=item IO::AIO::flush	1209	=back
775		1210
776	Wait till all outstanding AIO requests have been handled.	1211	=head3 CONTROLLING THE NUMBER OF THREADS
777		1212
778	Strictly equivalent to:	1213	=over
779
780	IO::AIO::poll_wait, IO::AIO::poll_cb
781	while IO::AIO::nreqs;
782
783	=item IO::AIO::poll
784
785	Waits until some requests have been handled.
786
787	Strictly equivalent to:
788
789	IO::AIO::poll_wait, IO::AIO::poll_cb
790	if IO::AIO::nreqs;
791		1214
792	=item IO::AIO::min_parallel $nthreads	1215	=item IO::AIO::min_parallel $nthreads
793		1216
794	Set the minimum number of AIO threads to C<$nthreads>. The current	1217	Set the minimum number of AIO threads to C<$nthreads>. The current
795	default is C<8>, which means eight asynchronous operations can execute	1218	default is C<8>, which means eight asynchronous operations can execute
796	concurrently at any one time (the number of outstanding requests,	1219	concurrently at any one time (the number of outstanding requests,
797	however, is unlimited).	1220	however, is unlimited).
798		1221
799	IO::AIO starts threads only on demand, when an AIO request is queued and	1222	IO::AIO starts threads only on demand, when an AIO request is queued and
800	no free thread exists.	1223	no free thread exists. Please note that queueing up a hundred requests can
		1224	create demand for a hundred threads, even if it turns out that everything
		1225	is in the cache and could have been processed faster by a single thread.
801		1226
802	It is recommended to keep the number of threads relatively low, as some	1227	It is recommended to keep the number of threads relatively low, as some
803	Linux kernel versions will scale negatively with the number of threads	1228	Linux kernel versions will scale negatively with the number of threads
804	(higher parallelity => MUCH higher latency). With current Linux 2.6	1229	(higher parallelity => MUCH higher latency). With current Linux 2.6
805	versions, 4-32 threads should be fine.	1230	versions, 4-32 threads should be fine.
…		…
819	This module automatically runs C<max_parallel 0> at program end, to ensure	1244	This module automatically runs C<max_parallel 0> at program end, to ensure
820	that all threads are killed and that there are no outstanding requests.	1245	that all threads are killed and that there are no outstanding requests.
821		1246
822	Under normal circumstances you don't need to call this function.	1247	Under normal circumstances you don't need to call this function.
823		1248
		1249	=item IO::AIO::max_idle $nthreads
		1250
		1251	Limit the number of threads (default: 4) that are allowed to idle (i.e.,
		1252	threads that did not get a request to process within 10 seconds). That
		1253	means if a thread becomes idle while C<$nthreads> other threads are also
		1254	idle, it will free its resources and exit.
		1255
		1256	This is useful when you allow a large number of threads (e.g. 100 or 1000)
		1257	to allow for extremely high load situations, but want to free resources
		1258	under normal circumstances (1000 threads can easily consume 30MB of RAM).
		1259
		1260	The default is probably ok in most situations, especially if thread
		1261	creation is fast. If thread creation is very slow on your system you might
		1262	want to use larger values.
		1263
824	=item $oldnreqs = IO::AIO::max_outstanding $nreqs	1264	=item $oldmaxreqs = IO::AIO::max_outstanding $maxreqs
825		1265
826	[DEPRECATED]	1266	This is a very bad function to use in interactive programs because it
		1267	blocks, and a bad way to reduce concurrency because it is inexact: Better
		1268	use an C<aio_group> together with a feed callback.
827		1269
828	Sets the maximum number of outstanding requests to C<$nreqs>. If you	1270	Sets the maximum number of outstanding requests to C<$nreqs>. If you
829	try to queue up more than this number of requests, the caller will block until	1271	do queue up more than this number of requests, the next call to the
830	some requests have been handled.	1272	C<poll_cb> (and C<poll_some> and other functions calling C<poll_cb>)
		1273	function will block until the limit is no longer exceeded.
831		1274
832	The default is very large, so normally there is no practical limit. If you	1275	The default value is very large, so there is no practical limit on the
833	queue up many requests in a loop it often improves speed if you set	1276	number of outstanding requests.
834	this to a relatively low number, such as C<100>.
835		1277
836	This function does not work well together with C<aio_group>'s, and their	1278	You can still queue as many requests as you want. Therefore,
837	feeder interface is better suited to limiting concurrency, so do not use	1279	C<max_oustsanding> is mainly useful in simple scripts (with low values) or
838	this function.	1280	as a stop gap to shield against fatal memory overflow (with large values).
839
840	Under normal circumstances you don't need to call this function.
841		1281
842	=back	1282	=back
843		1283
		1284	=head3 STATISTICAL INFORMATION
		1285
		1286	=over
		1287
		1288	=item IO::AIO::nreqs
		1289
		1290	Returns the number of requests currently in the ready, execute or pending
		1291	states (i.e. for which their callback has not been invoked yet).
		1292
		1293	Example: wait till there are no outstanding requests anymore:
		1294
		1295	IO::AIO::poll_wait, IO::AIO::poll_cb
		1296	while IO::AIO::nreqs;
		1297
		1298	=item IO::AIO::nready
		1299
		1300	Returns the number of requests currently in the ready state (not yet
		1301	executed).
		1302
		1303	=item IO::AIO::npending
		1304
		1305	Returns the number of requests currently in the pending state (executed,
		1306	but not yet processed by poll_cb).
		1307
		1308	=back
		1309
844	=cut	1310	=cut
845		1311
846	# support function to convert a fd into a perl filehandle
847	sub _fd2fh {
848	return undef if $_[0] < 0;
849
850	# try to generate nice filehandles
851	my $sym = "IO::AIO::fd#$_[0]";
852	local *$sym;
853
854	open *$sym, "+<&=$_[0]" # usually works under any unix
855	or open *$sym, "<&=$_[0]" # cygwin needs this
856	or open *$sym, ">&=$_[0]" # or this
857	or return undef;
858
859	*$sym
860	}
861
862	min_parallel 8;	1312	min_parallel 8;
863		1313
864	END {	1314	END { flush }
865	max_parallel 0;
866	}
867		1315
868	1;	1316	1;
869		1317
870	=head2 FORK BEHAVIOUR	1318	=head2 FORK BEHAVIOUR
871		1319
872	This module should do "the right thing" when the process using it forks:	1320	This module should do "the right thing" when the process using it forks:
873		1321
874	Before the fork, IO::AIO enters a quiescent state where no requests	1322	Before the fork, IO::AIO enters a quiescent state where no requests
875	can be added in other threads and no results will be processed. After	1323	can be added in other threads and no results will be processed. After
876	the fork the parent simply leaves the quiescent state and continues	1324	the fork the parent simply leaves the quiescent state and continues
877	request/result processing, while the child clears the request/result	1325	request/result processing, while the child frees the request/result queue
878	queue (so the requests started before the fork will only be handled in	1326	(so that the requests started before the fork will only be handled in the
879	the parent). Threads will be started on demand until the limit ste in the	1327	parent). Threads will be started on demand until the limit set in the
880	parent process has been reached again.	1328	parent process has been reached again.
881		1329
882	In short: the parent will, after a short pause, continue as if fork had	1330	In short: the parent will, after a short pause, continue as if fork had
883	not been called, while the child will act as if IO::AIO has not been used	1331	not been called, while the child will act as if IO::AIO has not been used
884	yet.	1332	yet.
885		1333
886	=head2 MEMORY USAGE	1334	=head2 MEMORY USAGE
887		1335
		1336	Per-request usage:
		1337
888	Each aio request uses - depending on your architecture - around 128 bytes	1338	Each aio request uses - depending on your architecture - around 100-200
889	of memory. In addition, stat requests need a stat buffer (possibly a few	1339	bytes of memory. In addition, stat requests need a stat buffer (possibly
890	hundred bytes). Perl scalars and other data passed into aio requests will	1340	a few hundred bytes), readdir requires a result buffer and so on. Perl
891	also be locked.	1341	scalars and other data passed into aio requests will also be locked and
		1342	will consume memory till the request has entered the done state.
892		1343
893	This is now awfully much, so queuing lots of requests is not usually a	1344	This is not awfully much, so queuing lots of requests is not usually a
894	problem.	1345	problem.
895		1346
896	Each thread needs a stack area which is usually around 16k, sometimes much	1347	Per-thread usage:
897	larger, depending on the OS.	1348
		1349	In the execution phase, some aio requests require more memory for
		1350	temporary buffers, and each thread requires a stack and other data
		1351	structures (usually around 16k-128k, depending on the OS).
		1352
		1353	=head1 KNOWN BUGS
		1354
		1355	Known bugs will be fixed in the next release.
898		1356
899	=head1 SEE ALSO	1357	=head1 SEE ALSO
900		1358
901	L<Coro::AIO>.	1359	L<Coro::AIO>.
902		1360

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing IO-AIO/AIO.pm (file contents): Revision 1.68 by root, Tue Oct 24 03:17:39 2006 UTC vs. Revision 1.121 by root, Wed Apr 16 16:45:18 2008 UTC

Diff Legend

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.68 by root, Tue Oct 24 03:17:39 2006 UTC vs.
Revision 1.121 by root, Wed Apr 16 16:45:18 2008 UTC