ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/IO-AIO/AIO.pm

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.171 by root, Sat Jan 2 14:24:32 2010 UTC vs.
Revision 1.283 by root, Tue Feb 20 06:05:19 2018 UTC

1	=head1 NAME	1	=head1 NAME
2		2
3	IO::AIO - Asynchronous Input/Output	3	IO::AIO - Asynchronous/Advanced Input/Output
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	use IO::AIO;	7	use IO::AIO;
8		8
9	aio_open "/etc/passwd", O_RDONLY, 0, sub {	9	aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub {
10	my $fh = shift	10	my $fh = shift
11	or die "/etc/passwd: $!";	11	or die "/etc/passwd: $!";
12	...	12	...
13	};	13	};
14		14
…		…
25	my $req = aio_unlink "/tmp/file", sub { };	25	my $req = aio_unlink "/tmp/file", sub { };
26	$req->cancel; # cancel request if still in queue	26	$req->cancel; # cancel request if still in queue
27		27
28	my $grp = aio_group sub { print "all stats done\n" };	28	my $grp = aio_group sub { print "all stats done\n" };
29	add $grp aio_stat "..." for ...;	29	add $grp aio_stat "..." for ...;
30
31	# AnyEvent integration (EV, Event, Glib, Tk, POE, urxvt, pureperl...)
32	use AnyEvent::AIO;
33
34	# EV integration
35	my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
36
37	# Event integration
38	Event->io (fd => IO::AIO::poll_fileno,
39	poll => 'r',
40	cb => \&IO::AIO::poll_cb);
41
42	# Glib/Gtk2 integration
43	add_watch Glib::IO IO::AIO::poll_fileno,
44	in => sub { IO::AIO::poll_cb; 1 };
45
46	# Tk integration
47	Tk::Event::IO->fileevent (IO::AIO::poll_fileno, "",
48	readable => \&IO::AIO::poll_cb);
49
50	# Danga::Socket integration
51	Danga::Socket->AddOtherFds (IO::AIO::poll_fileno =>
52	\&IO::AIO::poll_cb);
53		30
54	=head1 DESCRIPTION	31	=head1 DESCRIPTION
55		32
56	This module implements asynchronous I/O using whatever means your	33	This module implements asynchronous I/O using whatever means your
57	operating system supports. It is implemented as an interface to C<libeio>	34	operating system supports. It is implemented as an interface to C<libeio>
…		…
81	not well-supported or restricted (GNU/Linux doesn't allow them on normal	58	not well-supported or restricted (GNU/Linux doesn't allow them on normal
82	files currently, for example), and they would only support aio_read and	59	files currently, for example), and they would only support aio_read and
83	aio_write, so the remaining functionality would have to be implemented	60	aio_write, so the remaining functionality would have to be implemented
84	using threads anyway.	61	using threads anyway.
85		62
		63	In addition to asynchronous I/O, this module also exports some rather
		64	arcane interfaces, such as C<madvise> or linux's C<splice> system call,
		65	which is why the C<A> in C<AIO> can also mean I<advanced>.
		66
86	Although the module will work in the presence of other (Perl-) threads,	67	Although the module will work in the presence of other (Perl-) threads,
87	it is currently not reentrant in any way, so use appropriate locking	68	it is currently not reentrant in any way, so use appropriate locking
88	yourself, always call C<poll_cb> from within the same thread, or never	69	yourself, always call C<poll_cb> from within the same thread, or never
89	call C<poll_cb> (or other C<aio_> functions) recursively.	70	call C<poll_cb> (or other C<aio_> functions) recursively.
90		71
91	=head2 EXAMPLE	72	=head2 EXAMPLE
92		73
93	This is a simple example that uses the EV module and loads	74	This is a simple example that uses the EV module and loads
94	F</etc/passwd> asynchronously:	75	F</etc/passwd> asynchronously:
95		76
96	use Fcntl;
97	use EV;	77	use EV;
98	use IO::AIO;	78	use IO::AIO;
99		79
100	# register the IO::AIO callback with EV	80	# register the IO::AIO callback with EV
101	my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;	81	my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
102		82
103	# queue the request to open /etc/passwd	83	# queue the request to open /etc/passwd
104	aio_open "/etc/passwd", O_RDONLY, 0, sub {	84	aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub {
105	my $fh = shift	85	my $fh = shift
106	or die "error while opening: $!";	86	or die "error while opening: $!";
107		87
108	# stat'ing filehandles is generally non-blocking	88	# stat'ing filehandles is generally non-blocking
109	my $size = -s $fh;	89	my $size = -s $fh;
…		…
118		98
119	# file contents now in $contents	99	# file contents now in $contents
120	print $contents;	100	print $contents;
121		101
122	# exit event loop and program	102	# exit event loop and program
123	EV::unloop;	103	EV::break;
124	};	104	};
125	};	105	};
126		106
127	# possibly queue up other requests, or open GUI windows,	107	# possibly queue up other requests, or open GUI windows,
128	# check for sockets etc. etc.	108	# check for sockets etc. etc.
129		109
130	# process events as long as there are some:	110	# process events as long as there are some:
131	EV::loop;	111	EV::run;
132		112
133	=head1 REQUEST ANATOMY AND LIFETIME	113	=head1 REQUEST ANATOMY AND LIFETIME
134		114
135	Every C<aio_*> function creates a request. which is a C data structure not	115	Every C<aio_*> function creates a request. which is a C data structure not
136	directly visible to Perl.	116	directly visible to Perl.
…		…
191	use common::sense;	171	use common::sense;
192		172
193	use base 'Exporter';	173	use base 'Exporter';
194		174
195	BEGIN {	175	BEGIN {
196	our $VERSION = '3.4';	176	our $VERSION = 4.4;
197		177
198	our @AIO_REQ = qw(aio_sendfile aio_read aio_write aio_open aio_close	178	our @AIO_REQ = qw(aio_sendfile aio_seek aio_read aio_write aio_open aio_close
199	aio_stat aio_lstat aio_unlink aio_rmdir aio_readdir aio_readdirx	179	aio_stat aio_lstat aio_unlink aio_rmdir aio_readdir aio_readdirx
200	aio_scandir aio_symlink aio_readlink aio_sync aio_fsync	180	aio_scandir aio_symlink aio_readlink aio_realpath aio_fcntl aio_ioctl
201	aio_fdatasync aio_sync_file_range aio_pathsync aio_readahead	181	aio_sync aio_fsync aio_syncfs aio_fdatasync aio_sync_file_range
		182	aio_pathsync aio_readahead aio_fiemap aio_allocate
202	aio_rename aio_link aio_move aio_copy aio_group	183	aio_rename aio_rename2 aio_link aio_move aio_copy aio_group
203	aio_nop aio_mknod aio_load aio_rmtree aio_mkdir aio_chown	184	aio_nop aio_mknod aio_load aio_rmtree aio_mkdir aio_chown
204	aio_chmod aio_utime aio_truncate	185	aio_chmod aio_utime aio_truncate
205	aio_msync aio_mtouch);	186	aio_msync aio_mtouch aio_mlock aio_mlockall
		187	aio_statvfs
		188	aio_slurp
		189	aio_wd);
206		190
207	our @EXPORT = (@AIO_REQ, qw(aioreq_pri aioreq_nice));	191	our @EXPORT = (@AIO_REQ, qw(aioreq_pri aioreq_nice));
208	our @EXPORT_OK = qw(poll_fileno poll_cb poll_wait flush	192	our @EXPORT_OK = qw(poll_fileno poll_cb poll_wait flush
209	min_parallel max_parallel max_idle	193	min_parallel max_parallel max_idle idle_timeout
210	nreqs nready npending nthreads	194	nreqs nready npending nthreads
211	max_poll_time max_poll_reqs	195	max_poll_time max_poll_reqs
212	sendfile fadvise);	196	sendfile fadvise madvise
		197	mmap munmap munlock munlockall);
213		198
214	push @AIO_REQ, qw(aio_busy); # not exported	199	push @AIO_REQ, qw(aio_busy); # not exported
215		200
216	@IO::AIO::GRP::ISA = 'IO::AIO::REQ';	201	@IO::AIO::GRP::ISA = 'IO::AIO::REQ';
217		202
…		…
219	XSLoader::load ("IO::AIO", $VERSION);	204	XSLoader::load ("IO::AIO", $VERSION);
220	}	205	}
221		206
222	=head1 FUNCTIONS	207	=head1 FUNCTIONS
223		208
224	=head2 AIO REQUEST FUNCTIONS	209	=head2 QUICK OVERVIEW
		210
		211	This section simply lists the prototypes most of the functions for
		212	quick reference. See the following sections for function-by-function
		213	documentation.
		214
		215	aio_wd $pathname, $callback->($wd)
		216	aio_open $pathname, $flags, $mode, $callback->($fh)
		217	aio_close $fh, $callback->($status)
		218	aio_seek $fh,$offset,$whence, $callback->($offs)
		219	aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
		220	aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
		221	aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval)
		222	aio_readahead $fh,$offset,$length, $callback->($retval)
		223	aio_stat $fh_or_path, $callback->($status)
		224	aio_lstat $fh, $callback->($status)
		225	aio_statvfs $fh_or_path, $callback->($statvfs)
		226	aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
		227	aio_chown $fh_or_path, $uid, $gid, $callback->($status)
		228	aio_chmod $fh_or_path, $mode, $callback->($status)
		229	aio_truncate $fh_or_path, $offset, $callback->($status)
		230	aio_allocate $fh, $mode, $offset, $len, $callback->($status)
		231	aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)
		232	aio_unlink $pathname, $callback->($status)
		233	aio_mknod $pathname, $mode, $dev, $callback->($status)
		234	aio_link $srcpath, $dstpath, $callback->($status)
		235	aio_symlink $srcpath, $dstpath, $callback->($status)
		236	aio_readlink $pathname, $callback->($link)
		237	aio_realpath $pathname, $callback->($path)
		238	aio_rename $srcpath, $dstpath, $callback->($status)
		239	aio_rename2 $srcpath, $dstpath, $flags, $callback->($status)
		240	aio_mkdir $pathname, $mode, $callback->($status)
		241	aio_rmdir $pathname, $callback->($status)
		242	aio_readdir $pathname, $callback->($entries)
		243	aio_readdirx $pathname, $flags, $callback->($entries, $flags)
		244	IO::AIO::READDIR_DENTS IO::AIO::READDIR_DIRS_FIRST
		245	IO::AIO::READDIR_STAT_ORDER IO::AIO::READDIR_FOUND_UNKNOWN
		246	aio_scandir $pathname, $maxreq, $callback->($dirs, $nondirs)
		247	aio_load $pathname, $data, $callback->($status)
		248	aio_copy $srcpath, $dstpath, $callback->($status)
		249	aio_move $srcpath, $dstpath, $callback->($status)
		250	aio_rmtree $pathname, $callback->($status)
		251	aio_fcntl $fh, $cmd, $arg, $callback->($status)
		252	aio_ioctl $fh, $request, $buf, $callback->($status)
		253	aio_sync $callback->($status)
		254	aio_syncfs $fh, $callback->($status)
		255	aio_fsync $fh, $callback->($status)
		256	aio_fdatasync $fh, $callback->($status)
		257	aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)
		258	aio_pathsync $pathname, $callback->($status)
		259	aio_msync $scalar, $offset = 0, $length = undef, flags = MS_SYNC, $callback->($status)
		260	aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
		261	aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
		262	aio_mlockall $flags, $callback->($status)
		263	aio_group $callback->(...)
		264	aio_nop $callback->()
		265
		266	$prev_pri = aioreq_pri [$pri]
		267	aioreq_nice $pri_adjust
		268
		269	IO::AIO::poll_wait
		270	IO::AIO::poll_cb
		271	IO::AIO::poll
		272	IO::AIO::flush
		273	IO::AIO::max_poll_reqs $nreqs
		274	IO::AIO::max_poll_time $seconds
		275	IO::AIO::min_parallel $nthreads
		276	IO::AIO::max_parallel $nthreads
		277	IO::AIO::max_idle $nthreads
		278	IO::AIO::idle_timeout $seconds
		279	IO::AIO::max_outstanding $maxreqs
		280	IO::AIO::nreqs
		281	IO::AIO::nready
		282	IO::AIO::npending
		283	$nfd = IO::AIO::get_fdlimit [EXPERIMENTAL]
		284	IO::AIO::min_fdlimit $nfd [EXPERIMENTAL]
		285
		286	IO::AIO::sendfile $ofh, $ifh, $offset, $count
		287	IO::AIO::fadvise $fh, $offset, $len, $advice
		288	IO::AIO::mmap $scalar, $length, $prot, $flags[, $fh[, $offset]]
		289	IO::AIO::munmap $scalar
		290	IO::AIO::madvise $scalar, $offset, $length, $advice
		291	IO::AIO::mprotect $scalar, $offset, $length, $protect
		292	IO::AIO::munlock $scalar, $offset = 0, $length = undef
		293	IO::AIO::munlockall
		294
		295	=head2 API NOTES
225		296
226	All the C<aio_*> calls are more or less thin wrappers around the syscall	297	All the C<aio_*> calls are more or less thin wrappers around the syscall
227	with the same name (sans C<aio_>). The arguments are similar or identical,	298	with the same name (sans C<aio_>). The arguments are similar or identical,
228	and they all accept an additional (and optional) C<$callback> argument	299	and they all accept an additional (and optional) C<$callback> argument
229	which must be a code reference. This code reference will get called with	300	which must be a code reference. This code reference will be called after
230	the syscall return code (e.g. most syscalls return C<-1> on error, unlike	301	the syscall has been executed in an asynchronous fashion. The results
231	perl, which usually delivers "false") as its sole argument after the given	302	of the request will be passed as arguments to the callback (and, if an
232	syscall has been executed asynchronously.	303	error occured, in C<$!>) - for most requests the syscall return code (e.g.
		304	most syscalls return C<-1> on error, unlike perl, which usually delivers
		305	"false").
		306
		307	Some requests (such as C<aio_readdir>) pass the actual results and
		308	communicate failures by passing C<undef>.
233		309
234	All functions expecting a filehandle keep a copy of the filehandle	310	All functions expecting a filehandle keep a copy of the filehandle
235	internally until the request has finished.	311	internally until the request has finished.
236		312
237	All functions return request objects of type L<IO::AIO::REQ> that allow	313	All functions return request objects of type L<IO::AIO::REQ> that allow
238	further manipulation of those requests while they are in-flight.	314	further manipulation of those requests while they are in-flight.
239		315
240	The pathnames you pass to these routines I<must> be absolute and	316	The pathnames you pass to these routines I<should> be absolute. The
241	encoded as octets. The reason for the former is that at the time the	317	reason for this is that at the time the request is being executed, the
242	request is being executed, the current working directory could have	318	current working directory could have changed. Alternatively, you can
243	changed. Alternatively, you can make sure that you never change the	319	make sure that you never change the current working directory anywhere
244	current working directory anywhere in the program and then use relative	320	in the program and then use relative paths. You can also take advantage
245	paths.	321	of IO::AIOs working directory abstraction, that lets you specify paths
		322	relative to some previously-opened "working directory object" - see the
		323	description of the C<IO::AIO::WD> class later in this document.
246		324
247	To encode pathnames as octets, either make sure you either: a) always pass	325	To encode pathnames as octets, either make sure you either: a) always pass
248	in filenames you got from outside (command line, readdir etc.) without	326	in filenames you got from outside (command line, readdir etc.) without
249	tinkering, b) are ASCII or ISO 8859-1, c) use the Encode module and encode	327	tinkering, b) are in your native filesystem encoding, c) use the Encode
250	your pathnames to the locale (or other) encoding in effect in the user	328	module and encode your pathnames to the locale (or other) encoding in
251	environment, d) use Glib::filename_from_unicode on unicode filenames or e)	329	effect in the user environment, d) use Glib::filename_from_unicode on
252	use something else to ensure your scalar has the correct contents.	330	unicode filenames or e) use something else to ensure your scalar has the
		331	correct contents.
253		332
254	This works, btw. independent of the internal UTF-8 bit, which IO::AIO	333	This works, btw. independent of the internal UTF-8 bit, which IO::AIO
255	handles correctly whether it is set or not.	334	handles correctly whether it is set or not.
		335
		336	=head2 AIO REQUEST FUNCTIONS
256		337
257	=over 4	338	=over 4
258		339
259	=item $prev_pri = aioreq_pri [$pri]	340	=item $prev_pri = aioreq_pri [$pri]
260		341
…		…
290		371
291		372
292	=item aio_open $pathname, $flags, $mode, $callback->($fh)	373	=item aio_open $pathname, $flags, $mode, $callback->($fh)
293		374
294	Asynchronously open or create a file and call the callback with a newly	375	Asynchronously open or create a file and call the callback with a newly
295	created filehandle for the file.	376	created filehandle for the file (or C<undef> in case of an error).
296		377
297	The pathname passed to C<aio_open> must be absolute. See API NOTES, above,	378	The pathname passed to C<aio_open> must be absolute. See API NOTES, above,
298	for an explanation.	379	for an explanation.
299		380
300	The C<$flags> argument is a bitmask. See the C<Fcntl> module for a	381	The C<$flags> argument is a bitmask. See the C<Fcntl> module for a
…		…
307	by the umask in effect then the request is being executed, so better never	388	by the umask in effect then the request is being executed, so better never
308	change the umask.	389	change the umask.
309		390
310	Example:	391	Example:
311		392
312	aio_open "/etc/passwd", O_RDONLY, 0, sub {	393	aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub {
313	if ($_[0]) {	394	if ($_[0]) {
314	print "open successful, fh is $_[0]\n";	395	print "open successful, fh is $_[0]\n";
315	...	396	...
316	} else {	397	} else {
317	die "open failed: $!\n";	398	die "open failed: $!\n";
318	}	399	}
319	};	400	};
320		401
		402	In addition to all the common open modes/flags (C<O_RDONLY>, C<O_WRONLY>,
		403	C<O_RDWR>, C<O_CREAT>, C<O_TRUNC>, C<O_EXCL> and C<O_APPEND>), the
		404	following POSIX and non-POSIX constants are available (missing ones on
		405	your system are, as usual, C<0>):
		406
		407	C<O_ASYNC>, C<O_DIRECT>, C<O_NOATIME>, C<O_CLOEXEC>, C<O_NOCTTY>, C<O_NOFOLLOW>,
		408	C<O_NONBLOCK>, C<O_EXEC>, C<O_SEARCH>, C<O_DIRECTORY>, C<O_DSYNC>,
		409	C<O_RSYNC>, C<O_SYNC>, C<O_PATH>, C<O_TMPFILE>, and C<O_TTY_INIT>.
		410
321		411
322	=item aio_close $fh, $callback->($status)	412	=item aio_close $fh, $callback->($status)
323		413
324	Asynchronously close a file and call the callback with the result	414	Asynchronously close a file and call the callback with the result
325	code.	415	code.
…		…
334	Or in other words: the file descriptor will be closed, but it will not be	424	Or in other words: the file descriptor will be closed, but it will not be
335	free for reuse until the perl filehandle is closed.	425	free for reuse until the perl filehandle is closed.
336		426
337	=cut	427	=cut
338		428
		429	=item aio_seek $fh, $offset, $whence, $callback->($offs)
		430
		431	Seeks the filehandle to the new C<$offset>, similarly to perl's
		432	C<sysseek>. The C<$whence> can use the traditional values (C<0> for
		433	C<IO::AIO::SEEK_SET>, C<1> for C<IO::AIO::SEEK_CUR> or C<2> for
		434	C<IO::AIO::SEEK_END>).
		435
		436	The resulting absolute offset will be passed to the callback, or C<-1> in
		437	case of an error.
		438
		439	In theory, the C<$whence> constants could be different than the
		440	corresponding values from L<Fcntl>, but perl guarantees they are the same,
		441	so don't panic.
		442
		443	As a GNU/Linux (and maybe Solaris) extension, also the constants
		444	C<IO::AIO::SEEK_DATA> and C<IO::AIO::SEEK_HOLE> are available, if they
		445	could be found. No guarantees about suitability for use in C<aio_seek> or
		446	Perl's C<sysseek> can be made though, although I would naively assume they
		447	"just work".
		448
339	=item aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)	449	=item aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
340		450
341	=item aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)	451	=item aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
342		452
343	Reads or writes C<$length> bytes from or to the specified C<$fh> and	453	Reads or writes C<$length> bytes from or to the specified C<$fh> and
344	C<$offset> into the scalar given by C<$data> and offset C<$dataoffset>	454	C<$offset> into the scalar given by C<$data> and offset C<$dataoffset> and
345	and calls the callback without the actual number of bytes read (or -1 on	455	calls the callback with the actual number of bytes transferred (or -1 on
346	error, just like the syscall).	456	error, just like the syscall).
347		457
348	C<aio_read> will, like C<sysread>, shrink or grow the C<$data> scalar to	458	C<aio_read> will, like C<sysread>, shrink or grow the C<$data> scalar to
349	offset plus the actual number of bytes read.	459	offset plus the actual number of bytes read.
350		460
…		…
375		485
376	Tries to copy C<$length> bytes from C<$in_fh> to C<$out_fh>. It starts	486	Tries to copy C<$length> bytes from C<$in_fh> to C<$out_fh>. It starts
377	reading at byte offset C<$in_offset>, and starts writing at the current	487	reading at byte offset C<$in_offset>, and starts writing at the current
378	file offset of C<$out_fh>. Because of that, it is not safe to issue more	488	file offset of C<$out_fh>. Because of that, it is not safe to issue more
379	than one C<aio_sendfile> per C<$out_fh>, as they will interfere with each	489	than one C<aio_sendfile> per C<$out_fh>, as they will interfere with each
380	other.	490	other. The same C<$in_fh> works fine though, as this function does not
		491	move or use the file offset of C<$in_fh>.
381		492
		493	Please note that C<aio_sendfile> can read more bytes from C<$in_fh> than
		494	are written, and there is no way to find out how many more bytes have been
		495	read from C<aio_sendfile> alone, as C<aio_sendfile> only provides the
		496	number of bytes written to C<$out_fh>. Only if the result value equals
		497	C<$length> one can assume that C<$length> bytes have been read.
		498
		499	Unlike with other C<aio_> functions, it makes a lot of sense to use
		500	C<aio_sendfile> on non-blocking sockets, as long as one end (typically
		501	the C<$in_fh>) is a file - the file I/O will then be asynchronous, while
		502	the socket I/O will be non-blocking. Note, however, that you can run
		503	into a trap where C<aio_sendfile> reads some data with readahead, then
		504	fails to write all data, and when the socket is ready the next time, the
		505	data in the cache is already lost, forcing C<aio_sendfile> to again hit
		506	the disk. Explicit C<aio_read> + C<aio_write> let's you better control
		507	resource usage.
		508
382	This call tries to make use of a native C<sendfile> syscall to provide	509	This call tries to make use of a native C<sendfile>-like syscall to
383	zero-copy operation. For this to work, C<$out_fh> should refer to a	510	provide zero-copy operation. For this to work, C<$out_fh> should refer to
384	socket, and C<$in_fh> should refer to mmap'able file.	511	a socket, and C<$in_fh> should refer to an mmap'able file.
385		512
386	If a native sendfile cannot be found or it fails with C<ENOSYS>,	513	If a native sendfile cannot be found or it fails with C<ENOSYS>,
387	C<ENOTSUP>, C<EOPNOTSUPP>, C<EAFNOSUPPORT>, C<EPROTOTYPE> or C<ENOTSOCK>,	514	C<EINVAL>, C<ENOTSUP>, C<EOPNOTSUPP>, C<EAFNOSUPPORT>, C<EPROTOTYPE> or
388	it will be emulated, so you can call C<aio_sendfile> on any type of	515	C<ENOTSOCK>, it will be emulated, so you can call C<aio_sendfile> on any
389	filehandle regardless of the limitations of the operating system.	516	type of filehandle regardless of the limitations of the operating system.
390		517
391	Please note, however, that C<aio_sendfile> can read more bytes from	518	As native sendfile syscalls (as practically any non-POSIX interface hacked
392	C<$in_fh> than are written, and there is no way to find out how many	519	together in a hurry to improve benchmark numbers) tend to be rather buggy
393	bytes have been read from C<aio_sendfile> alone, as C<aio_sendfile> only	520	on many systems, this implementation tries to work around some known bugs
394	provides the number of bytes written to C<$out_fh>. Only if the result	521	in Linux and FreeBSD kernels (probably others, too), but that might fail,
395	value equals C<$length> one can assume that C<$length> bytes have been	522	so you really really should check the return value of C<aio_sendfile> -
396	read.	523	fewer bytes than expected might have been transferred.
397		524
398		525
399	=item aio_readahead $fh,$offset,$length, $callback->($retval)	526	=item aio_readahead $fh,$offset,$length, $callback->($retval)
400		527
401	C<aio_readahead> populates the page cache with data from a file so that	528	C<aio_readahead> populates the page cache with data from a file so that
…		…
405	whole pages, so that offset is effectively rounded down to a page boundary	532	whole pages, so that offset is effectively rounded down to a page boundary
406	and bytes are read up to the next page boundary greater than or equal to	533	and bytes are read up to the next page boundary greater than or equal to
407	(off-set+length). C<aio_readahead> does not read beyond the end of the	534	(off-set+length). C<aio_readahead> does not read beyond the end of the
408	file. The current file offset of the file is left unchanged.	535	file. The current file offset of the file is left unchanged.
409		536
410	If that syscall doesn't exist (likely if your OS isn't Linux) it will be	537	If that syscall doesn't exist (likely if your kernel isn't Linux) it will
411	emulated by simply reading the data, which would have a similar effect.	538	be emulated by simply reading the data, which would have a similar effect.
412		539
413		540
414	=item aio_stat $fh_or_path, $callback->($status)	541	=item aio_stat $fh_or_path, $callback->($status)
415		542
416	=item aio_lstat $fh, $callback->($status)	543	=item aio_lstat $fh, $callback->($status)
…		…
423	for an explanation.	550	for an explanation.
424		551
425	Currently, the stats are always 64-bit-stats, i.e. instead of returning an	552	Currently, the stats are always 64-bit-stats, i.e. instead of returning an
426	error when stat'ing a large file, the results will be silently truncated	553	error when stat'ing a large file, the results will be silently truncated
427	unless perl itself is compiled with large file support.	554	unless perl itself is compiled with large file support.
		555
		556	To help interpret the mode and dev/rdev stat values, IO::AIO offers the
		557	following constants and functions (if not implemented, the constants will
		558	be C<0> and the functions will either C<croak> or fall back on traditional
		559	behaviour).
		560
		561	C<S_IFMT>, C<S_IFIFO>, C<S_IFCHR>, C<S_IFBLK>, C<S_IFLNK>, C<S_IFREG>,
		562	C<S_IFDIR>, C<S_IFWHT>, C<S_IFSOCK>, C<IO::AIO::major $dev_t>,
		563	C<IO::AIO::minor $dev_t>, C<IO::AIO::makedev $major, $minor>.
428		564
429	Example: Print the length of F</etc/passwd>:	565	Example: Print the length of F</etc/passwd>:
430		566
431	aio_stat "/etc/passwd", sub {	567	aio_stat "/etc/passwd", sub {
432	$_[0] and die "stat failed: $!";	568	$_[0] and die "stat failed: $!";
433	print "size is ", -s _, "\n";	569	print "size is ", -s _, "\n";
434	};	570	};
435		571
436		572
		573	=item aio_statvfs $fh_or_path, $callback->($statvfs)
		574
		575	Works like the POSIX C<statvfs> or C<fstatvfs> syscalls, depending on
		576	whether a file handle or path was passed.
		577
		578	On success, the callback is passed a hash reference with the following
		579	members: C<bsize>, C<frsize>, C<blocks>, C<bfree>, C<bavail>, C<files>,
		580	C<ffree>, C<favail>, C<fsid>, C<flag> and C<namemax>. On failure, C<undef>
		581	is passed.
		582
		583	The following POSIX IO::AIO::ST_* constants are defined: C<ST_RDONLY> and
		584	C<ST_NOSUID>.
		585
		586	The following non-POSIX IO::AIO::ST_* flag masks are defined to
		587	their correct value when available, or to C<0> on systems that do
		588	not support them: C<ST_NODEV>, C<ST_NOEXEC>, C<ST_SYNCHRONOUS>,
		589	C<ST_MANDLOCK>, C<ST_WRITE>, C<ST_APPEND>, C<ST_IMMUTABLE>, C<ST_NOATIME>,
		590	C<ST_NODIRATIME> and C<ST_RELATIME>.
		591
		592	Example: stat C</wd> and dump out the data if successful.
		593
		594	aio_statvfs "/wd", sub {
		595	my $f = $_[0]
		596	or die "statvfs: $!";
		597
		598	use Data::Dumper;
		599	say Dumper $f;
		600	};
		601
		602	# result:
		603	{
		604	bsize => 1024,
		605	bfree => 4333064312,
		606	blocks => 10253828096,
		607	files => 2050765568,
		608	flag => 4096,
		609	favail => 2042092649,
		610	bavail => 4333064312,
		611	ffree => 2042092649,
		612	namemax => 255,
		613	frsize => 1024,
		614	fsid => 1810
		615	}
		616
437	=item aio_utime $fh_or_path, $atime, $mtime, $callback->($status)	617	=item aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
438		618
439	Works like perl's C<utime> function (including the special case of $atime	619	Works like perl's C<utime> function (including the special case of $atime
440	and $mtime being undef). Fractional times are supported if the underlying	620	and $mtime being undef). Fractional times are supported if the underlying
441	syscalls support them.	621	syscalls support them.
…		…
468	=item aio_truncate $fh_or_path, $offset, $callback->($status)	648	=item aio_truncate $fh_or_path, $offset, $callback->($status)
469		649
470	Works like truncate(2) or ftruncate(2).	650	Works like truncate(2) or ftruncate(2).
471		651
472		652
		653	=item aio_allocate $fh, $mode, $offset, $len, $callback->($status)
		654
		655	Allocates or frees disk space according to the C<$mode> argument. See the
		656	linux C<fallocate> documentation for details.
		657
		658	C<$mode> is usually C<0> or C<IO::AIO::FALLOC_FL_KEEP_SIZE> to allocate
		659	space, or C<IO::AIO::FALLOC_FL_PUNCH_HOLE | IO::AIO::FALLOC_FL_KEEP_SIZE>,
		660	to deallocate a file range.
		661
		662	IO::AIO also supports C<FALLOC_FL_COLLAPSE_RANGE>, to remove a range
		663	(without leaving a hole), C<FALLOC_FL_ZERO_RANGE>, to zero a range,
		664	C<FALLOC_FL_INSERT_RANGE> to insert a range and C<FALLOC_FL_UNSHARE_RANGE>
		665	to unshare shared blocks (see your L<fallocate(2)> manpage).
		666
		667	The file system block size used by C<fallocate> is presumably the
		668	C<f_bsize> returned by C<statvfs>, but different filesystems and filetypes
		669	can dictate other limitations.
		670
		671	If C<fallocate> isn't available or cannot be emulated (currently no
		672	emulation will be attempted), passes C<-1> and sets C<$!> to C<ENOSYS>.
		673
		674
473	=item aio_chmod $fh_or_path, $mode, $callback->($status)	675	=item aio_chmod $fh_or_path, $mode, $callback->($status)
474		676
475	Works like perl's C<chmod> function.	677	Works like perl's C<chmod> function.
476		678
477		679
…		…
479		681
480	Asynchronously unlink (delete) a file and call the callback with the	682	Asynchronously unlink (delete) a file and call the callback with the
481	result code.	683	result code.
482		684
483		685
484	=item aio_mknod $path, $mode, $dev, $callback->($status)	686	=item aio_mknod $pathname, $mode, $dev, $callback->($status)
485		687
486	[EXPERIMENTAL]	688	[EXPERIMENTAL]
487		689
488	Asynchronously create a device node (or fifo). See mknod(2).	690	Asynchronously create a device node (or fifo). See mknod(2).
489		691
490	The only (POSIX-) portable way of calling this function is:	692	The only (POSIX-) portable way of calling this function is:
491		693
492	aio_mknod $path, IO::AIO::S_IFIFO | $mode, 0, sub { ...	694	aio_mknod $pathname, IO::AIO::S_IFIFO | $mode, 0, sub { ...
493		695
		696	See C<aio_stat> for info about some potentially helpful extra constants
		697	and functions.
494		698
495	=item aio_link $srcpath, $dstpath, $callback->($status)	699	=item aio_link $srcpath, $dstpath, $callback->($status)
496		700
497	Asynchronously create a new link to the existing object at C<$srcpath> at	701	Asynchronously create a new link to the existing object at C<$srcpath> at
498	the path C<$dstpath> and call the callback with the result code.	702	the path C<$dstpath> and call the callback with the result code.
…		…
502		706
503	Asynchronously create a new symbolic link to the existing object at C<$srcpath> at	707	Asynchronously create a new symbolic link to the existing object at C<$srcpath> at
504	the path C<$dstpath> and call the callback with the result code.	708	the path C<$dstpath> and call the callback with the result code.
505		709
506		710
507	=item aio_readlink $path, $callback->($link)	711	=item aio_readlink $pathname, $callback->($link)
508		712
509	Asynchronously read the symlink specified by C<$path> and pass it to	713	Asynchronously read the symlink specified by C<$path> and pass it to
510	the callback. If an error occurs, nothing or undef gets passed to the	714	the callback. If an error occurs, nothing or undef gets passed to the
511	callback.	715	callback.
512		716
513		717
		718	=item aio_realpath $pathname, $callback->($path)
		719
		720	Asynchronously make the path absolute and resolve any symlinks in
		721	C<$path>. The resulting path only consists of directories (same as
		722	L<Cwd::realpath>).
		723
		724	This request can be used to get the absolute path of the current working
		725	directory by passing it a path of F<.> (a single dot).
		726
		727
514	=item aio_rename $srcpath, $dstpath, $callback->($status)	728	=item aio_rename $srcpath, $dstpath, $callback->($status)
515		729
516	Asynchronously rename the object at C<$srcpath> to C<$dstpath>, just as	730	Asynchronously rename the object at C<$srcpath> to C<$dstpath>, just as
517	rename(2) and call the callback with the result code.	731	rename(2) and call the callback with the result code.
		732
		733	On systems that support the AIO::WD working directory abstraction
		734	natively, the case C<[$wd, "."]> as C<$srcpath> is specialcased - instead
		735	of failing, C<rename> is called on the absolute path of C<$wd>.
		736
		737
		738	=item aio_rename2 $srcpath, $dstpath, $flags, $callback->($status)
		739
		740	Basically a version of C<aio_rename> with an additional C<$flags>
		741	argument. Calling this with C<$flags=0> is the same as calling
		742	C<aio_rename>.
		743
		744	Non-zero flags are currently only supported on GNU/Linux systems that
		745	support renameat2. Other systems fail with C<ENOSYS> in this case.
		746
		747	The following constants are available (missing ones are, as usual C<0>),
		748	see renameat2(2) for details:
		749
		750	C<IO::AIO::RENAME_NOREPLACE>, C<IO::AIO::RENAME_EXCHANGE>
		751	and C<IO::AIO::RENAME_WHITEOUT>.
518		752
519		753
520	=item aio_mkdir $pathname, $mode, $callback->($status)	754	=item aio_mkdir $pathname, $mode, $callback->($status)
521		755
522	Asynchronously mkdir (create) a directory and call the callback with	756	Asynchronously mkdir (create) a directory and call the callback with
…		…
527	=item aio_rmdir $pathname, $callback->($status)	761	=item aio_rmdir $pathname, $callback->($status)
528		762
529	Asynchronously rmdir (delete) a directory and call the callback with the	763	Asynchronously rmdir (delete) a directory and call the callback with the
530	result code.	764	result code.
531		765
		766	On systems that support the AIO::WD working directory abstraction
		767	natively, the case C<[$wd, "."]> is specialcased - instead of failing,
		768	C<rmdir> is called on the absolute path of C<$wd>.
		769
532		770
533	=item aio_readdir $pathname, $callback->($entries)	771	=item aio_readdir $pathname, $callback->($entries)
534		772
535	Unlike the POSIX call of the same name, C<aio_readdir> reads an entire	773	Unlike the POSIX call of the same name, C<aio_readdir> reads an entire
536	directory (i.e. opendir + readdir + closedir). The entries will not be	774	directory (i.e. opendir + readdir + closedir). The entries will not be
…		…
540	array-ref with the filenames.	778	array-ref with the filenames.
541		779
542		780
543	=item aio_readdirx $pathname, $flags, $callback->($entries, $flags)	781	=item aio_readdirx $pathname, $flags, $callback->($entries, $flags)
544		782
545	Quite similar to C<aio_readdir>, but the C<$flags> argument allows to tune	783	Quite similar to C<aio_readdir>, but the C<$flags> argument allows one to
546	behaviour and output format. In case of an error, C<$entries> will be	784	tune behaviour and output format. In case of an error, C<$entries> will be
547	C<undef>.	785	C<undef>.
548		786
549	The flags are a combination of the following constants, ORed together (the	787	The flags are a combination of the following constants, ORed together (the
550	flags will also be passed to the callback, possibly modified):	788	flags will also be passed to the callback, possibly modified):
551		789
552	=over 4	790	=over 4
553		791
554	=item IO::AIO::READDIR_DENTS	792	=item IO::AIO::READDIR_DENTS
555		793
556	When this flag is off, then the callback gets an arrayref with of names	794	When this flag is off, then the callback gets an arrayref consisting of
557	only (as with C<aio_readdir>), otherwise it gets an arrayref with	795	names only (as with C<aio_readdir>), otherwise it gets an arrayref with
558	C<[$name, $type, $inode]> arrayrefs, each describing a single directory	796	C<[$name, $type, $inode]> arrayrefs, each describing a single directory
559	entry in more detail.	797	entry in more detail.
560		798
561	C<$name> is the name of the entry.	799	C<$name> is the name of the entry.
562		800
…		…
575	systems that do not deliver the inode information.	813	systems that do not deliver the inode information.
576		814
577	=item IO::AIO::READDIR_DIRS_FIRST	815	=item IO::AIO::READDIR_DIRS_FIRST
578		816
579	When this flag is set, then the names will be returned in an order where	817	When this flag is set, then the names will be returned in an order where
580	likely directories come first. This is useful when you need to quickly	818	likely directories come first, in optimal stat order. This is useful when
581	find directories, or you want to find all directories while avoiding to	819	you need to quickly find directories, or you want to find all directories
582	stat() each entry.	820	while avoiding to stat() each entry.
583		821
584	If the system returns type information in readdir, then this is used	822	If the system returns type information in readdir, then this is used
585	to find directories directly. Otherwise, likely directories are files	823	to find directories directly. Otherwise, likely directories are names
586	beginning with ".", or otherwise files with no dots, of which files with	824	beginning with ".", or otherwise names with no dots, of which names with
587	short names are tried first.	825	short names are tried first.
588		826
589	=item IO::AIO::READDIR_STAT_ORDER	827	=item IO::AIO::READDIR_STAT_ORDER
590		828
591	When this flag is set, then the names will be returned in an order	829	When this flag is set, then the names will be returned in an order
…		…
598		836
599	=item IO::AIO::READDIR_FOUND_UNKNOWN	837	=item IO::AIO::READDIR_FOUND_UNKNOWN
600		838
601	This flag should not be set when calling C<aio_readdirx>. Instead, it	839	This flag should not be set when calling C<aio_readdirx>. Instead, it
602	is being set by C<aio_readdirx>, when any of the C<$type>'s found were	840	is being set by C<aio_readdirx>, when any of the C<$type>'s found were
603	C<IO::AIO::DT_UNKNOWN>. The absense of this flag therefore indicates that all	841	C<IO::AIO::DT_UNKNOWN>. The absence of this flag therefore indicates that all
604	C<$type>'s are known, which can be used to speed up some algorithms.	842	C<$type>'s are known, which can be used to speed up some algorithms.
605		843
606	=back	844	=back
607		845
608		846
		847	=item aio_slurp $pathname, $offset, $length, $data, $callback->($status)
		848
		849	Opens, reads and closes the given file. The data is put into C<$data>,
		850	which is resized as required.
		851
		852	If C<$offset> is negative, then it is counted from the end of the file.
		853
		854	If C<$length> is zero, then the remaining length of the file is
		855	used. Also, in this case, the same limitations to modifying C<$data> apply
		856	as when IO::AIO::mmap is used, i.e. it must only be modified in-place
		857	with C<substr>. If the size of the file is known, specifying a non-zero
		858	C<$length> results in a performance advantage.
		859
		860	This request is similar to the older C<aio_load> request, but since it is
		861	a single request, it might be more efficient to use.
		862
		863	Example: load F</etc/passwd> into C<$passwd>.
		864
		865	my $passwd;
		866	aio_slurp "/etc/passwd", 0, 0, $passwd, sub {
		867	$_[0] >= 0
		868	or die "/etc/passwd: $!\n";
		869
		870	printf "/etc/passwd is %d bytes long, and contains:\n", length $passwd;
		871	print $passwd;
		872	};
		873	IO::AIO::flush;
		874
		875
609	=item aio_load $path, $data, $callback->($status)	876	=item aio_load $pathname, $data, $callback->($status)
610		877
611	This is a composite request that tries to fully load the given file into	878	This is a composite request that tries to fully load the given file into
612	memory. Status is the same as with aio_read.	879	memory. Status is the same as with aio_read.
		880
		881	Using C<aio_slurp> might be more efficient, as it is a single request.
613		882
614	=cut	883	=cut
615		884
616	sub aio_load($$;$) {	885	sub aio_load($$;$) {
617	my ($path, undef, $cb) = @_;	886	my ($path, undef, $cb) = @_;
…		…
637	=item aio_copy $srcpath, $dstpath, $callback->($status)	906	=item aio_copy $srcpath, $dstpath, $callback->($status)
638		907
639	Try to copy the I<file> (directories not supported as either source or	908	Try to copy the I<file> (directories not supported as either source or
640	destination) from C<$srcpath> to C<$dstpath> and call the callback with	909	destination) from C<$srcpath> to C<$dstpath> and call the callback with
641	a status of C<0> (ok) or C<-1> (error, see C<$!>).	910	a status of C<0> (ok) or C<-1> (error, see C<$!>).
		911
		912	Existing destination files will be truncated.
642		913
643	This is a composite request that creates the destination file with	914	This is a composite request that creates the destination file with
644	mode 0200 and copies the contents of the source file into it using	915	mode 0200 and copies the contents of the source file into it using
645	C<aio_sendfile>, followed by restoring atime, mtime, access mode and	916	C<aio_sendfile>, followed by restoring atime, mtime, access mode and
646	uid/gid, in that order.	917	uid/gid, in that order.
…		…
736	if ($_[0] && $! == EXDEV) {	1007	if ($_[0] && $! == EXDEV) {
737	aioreq_pri $pri;	1008	aioreq_pri $pri;
738	add $grp aio_copy $src, $dst, sub {	1009	add $grp aio_copy $src, $dst, sub {
739	$grp->result ($_[0]);	1010	$grp->result ($_[0]);
740		1011
741	if (!$_[0]) {	1012	unless ($_[0]) {
742	aioreq_pri $pri;	1013	aioreq_pri $pri;
743	add $grp aio_unlink $src;	1014	add $grp aio_unlink $src;
744	}	1015	}
745	};	1016	};
746	} else {	1017	} else {
…		…
749	};	1020	};
750		1021
751	$grp	1022	$grp
752	}	1023	}
753		1024
754	=item aio_scandir $path, $maxreq, $callback->($dirs, $nondirs)	1025	=item aio_scandir $pathname, $maxreq, $callback->($dirs, $nondirs)
755		1026
756	Scans a directory (similar to C<aio_readdir>) but additionally tries to	1027	Scans a directory (similar to C<aio_readdir>) but additionally tries to
757	efficiently separate the entries of directory C<$path> into two sets of	1028	efficiently separate the entries of directory C<$path> into two sets of
758	names, directories you can recurse into (directories), and ones you cannot	1029	names, directories you can recurse into (directories), and ones you cannot
759	recurse into (everything else, including symlinks to directories).	1030	recurse into (everything else, including symlinks to directories).
760		1031
761	C<aio_scandir> is a composite request that creates of many sub requests_	1032	C<aio_scandir> is a composite request that generates many sub requests.
762	C<$maxreq> specifies the maximum number of outstanding aio requests that	1033	C<$maxreq> specifies the maximum number of outstanding aio requests that
763	this function generates. If it is C<< <= 0 >>, then a suitable default	1034	this function generates. If it is C<< <= 0 >>, then a suitable default
764	will be chosen (currently 4).	1035	will be chosen (currently 4).
765		1036
766	On error, the callback is called without arguments, otherwise it receives	1037	On error, the callback is called without arguments, otherwise it receives
…		…
790	Then entries will be sorted into likely directories a non-initial dot	1061	Then entries will be sorted into likely directories a non-initial dot
791	currently) and likely non-directories (see C<aio_readdirx>). Then every	1062	currently) and likely non-directories (see C<aio_readdirx>). Then every
792	entry plus an appended C</.> will be C<stat>'ed, likely directories first,	1063	entry plus an appended C</.> will be C<stat>'ed, likely directories first,
793	in order of their inode numbers. If that succeeds, it assumes that the	1064	in order of their inode numbers. If that succeeds, it assumes that the
794	entry is a directory or a symlink to directory (which will be checked	1065	entry is a directory or a symlink to directory (which will be checked
795	seperately). This is often faster than stat'ing the entry itself because	1066	separately). This is often faster than stat'ing the entry itself because
796	filesystems might detect the type of the entry without reading the inode	1067	filesystems might detect the type of the entry without reading the inode
797	data (e.g. ext2fs filetype feature), even on systems that cannot return	1068	data (e.g. ext2fs filetype feature), even on systems that cannot return
798	the filetype information on readdir.	1069	the filetype information on readdir.
799		1070
800	If the known number of directories (link count - 2) has been reached, the	1071	If the known number of directories (link count - 2) has been reached, the
…		…
816		1087
817	my $grp = aio_group $cb;	1088	my $grp = aio_group $cb;
818		1089
819	$maxreq = 4 if $maxreq <= 0;	1090	$maxreq = 4 if $maxreq <= 0;
820		1091
821	# stat once	1092	# get a wd object
822	aioreq_pri $pri;	1093	aioreq_pri $pri;
823	add $grp aio_stat $path, sub {	1094	add $grp aio_wd $path, sub {
		1095	$_[0]
824	return $grp->result () if $_[0];	1096	or return $grp->result ();
825	my $now = time;
826	my $hash1 = join ":", (stat _)[0,1,3,7,9];
827		1097
828	# read the directory entries	1098	my $wd = [shift, "."];
		1099
		1100	# stat once
829	aioreq_pri $pri;	1101	aioreq_pri $pri;
830	add $grp aio_readdirx $path, READDIR_DIRS_FIRST, sub {	1102	add $grp aio_stat $wd, sub {
831	my $entries = shift
832	or return $grp->result ();	1103	return $grp->result () if $_[0];
		1104	my $now = time;
		1105	my $hash1 = join ":", (stat _)[0,1,3,7,9];
833		1106
834	# stat the dir another time	1107	# read the directory entries
835	aioreq_pri $pri;	1108	aioreq_pri $pri;
		1109	add $grp aio_readdirx $wd, READDIR_DIRS_FIRST, sub {
		1110	my $entries = shift
		1111	or return $grp->result ();
		1112
		1113	# stat the dir another time
		1114	aioreq_pri $pri;
836	add $grp aio_stat $path, sub {	1115	add $grp aio_stat $wd, sub {
837	my $hash2 = join ":", (stat _)[0,1,3,7,9];	1116	my $hash2 = join ":", (stat _)[0,1,3,7,9];
838		1117
839	my $ndirs;	1118	my $ndirs;
840		1119
841	# take the slow route if anything looks fishy	1120	# take the slow route if anything looks fishy
842	if ($hash1 ne $hash2 or (stat _)[9] == $now) {	1121	if ($hash1 ne $hash2 or (stat _)[9] == $now) {
843	$ndirs = -1;	1122	$ndirs = -1;
844	} else {	1123	} else {
845	# if nlink == 2, we are finished	1124	# if nlink == 2, we are finished
846	# for non-posix-fs's, we rely on nlink < 2	1125	# for non-posix-fs's, we rely on nlink < 2
847	$ndirs = (stat _)[3] - 2	1126	$ndirs = (stat _)[3] - 2
848	or return $grp->result ([], $entries);	1127	or return $grp->result ([], $entries);
849	}	1128	}
850		1129
851	my (@dirs, @nondirs);	1130	my (@dirs, @nondirs);
852		1131
853	my $statgrp = add $grp aio_group sub {	1132	my $statgrp = add $grp aio_group sub {
854	$grp->result (\@dirs, \@nondirs);	1133	$grp->result (\@dirs, \@nondirs);
855	};	1134	};
856		1135
857	limit $statgrp $maxreq;	1136	limit $statgrp $maxreq;
858	feed $statgrp sub {	1137	feed $statgrp sub {
859	return unless @$entries;	1138	return unless @$entries;
860	my $entry = shift @$entries;	1139	my $entry = shift @$entries;
861		1140
862	aioreq_pri $pri;	1141	aioreq_pri $pri;
		1142	$wd->[1] = "$entry/.";
863	add $statgrp aio_stat "$path/$entry/.", sub {	1143	add $statgrp aio_stat $wd, sub {
864	if ($_[0] < 0) {	1144	if ($_[0] < 0) {
865	push @nondirs, $entry;	1145	push @nondirs, $entry;
866	} else {	1146	} else {
867	# need to check for real directory	1147	# need to check for real directory
868	aioreq_pri $pri;	1148	aioreq_pri $pri;
		1149	$wd->[1] = $entry;
869	add $statgrp aio_lstat "$path/$entry", sub {	1150	add $statgrp aio_lstat $wd, sub {
870	if (-d _) {	1151	if (-d _) {
871	push @dirs, $entry;	1152	push @dirs, $entry;
872		1153
873	unless (--$ndirs) {	1154	unless (--$ndirs) {
874	push @nondirs, @$entries;	1155	push @nondirs, @$entries;
875	feed $statgrp;	1156	feed $statgrp;
		1157	}
		1158	} else {
		1159	push @nondirs, $entry;
876	}	1160	}
877	} else {
878	push @nondirs, $entry;
879	}	1161	}
880	}	1162	}
881	}	1163	};
882	};	1164	};
883	};	1165	};
884	};	1166	};
885	};	1167	};
886	};	1168	};
887		1169
888	$grp	1170	$grp
889	}	1171	}
890		1172
891	=item aio_rmtree $path, $callback->($status)	1173	=item aio_rmtree $pathname, $callback->($status)
892		1174
893	Delete a directory tree starting (and including) C<$path>, return the	1175	Delete a directory tree starting (and including) C<$path>, return the
894	status of the final C<rmdir> only. This is a composite request that	1176	status of the final C<rmdir> only. This is a composite request that
895	uses C<aio_scandir> to recurse into and rmdir directories, and unlink	1177	uses C<aio_scandir> to recurse into and rmdir directories, and unlink
896	everything else.	1178	everything else.
897		1179
898	=cut	1180	=cut
899		1181
…		…
921	};	1203	};
922		1204
923	$grp	1205	$grp
924	}	1206	}
925		1207
		1208	=item aio_fcntl $fh, $cmd, $arg, $callback->($status)
		1209
		1210	=item aio_ioctl $fh, $request, $buf, $callback->($status)
		1211
		1212	These work just like the C<fcntl> and C<ioctl> built-in functions, except
		1213	they execute asynchronously and pass the return value to the callback.
		1214
		1215	Both calls can be used for a lot of things, some of which make more sense
		1216	to run asynchronously in their own thread, while some others make less
		1217	sense. For example, calls that block waiting for external events, such
		1218	as locking, will also lock down an I/O thread while it is waiting, which
		1219	can deadlock the whole I/O system. At the same time, there might be no
		1220	alternative to using a thread to wait.
		1221
		1222	So in general, you should only use these calls for things that do
		1223	(filesystem) I/O, not for things that wait for other events (network,
		1224	other processes), although if you are careful and know what you are doing,
		1225	you still can.
		1226
		1227	The following constants are available (missing ones are, as usual C<0>):
		1228
		1229	C<F_DUPFD_CLOEXEC>,
		1230
		1231	C<F_OFD_GETLK>, C<F_OFD_SETLK>, C<F_OFD_GETLKW>,
		1232
		1233	C<FIFREEZE>, C<FITHAW>, C<FITRIM>, C<FICLONE>, C<FICLONERANGE>, C<FIDEDUPERANGE>.
		1234
		1235	C<FS_IOC_GETFLAGS>, C<FS_IOC_SETFLAGS>, C<FS_IOC_GETVERSION>, C<FS_IOC_SETVERSION>,
		1236	C<FS_IOC_FIEMAP>.
		1237
		1238	C<FS_IOC_FSGETXATTR>, C<FS_IOC_FSSETXATTR>, C<FS_IOC_SET_ENCRYPTION_POLICY>,
		1239	C<FS_IOC_GET_ENCRYPTION_PWSALT>, C<FS_IOC_GET_ENCRYPTION_POLICY>, C<FS_KEY_DESCRIPTOR_SIZE>.
		1240
		1241	C<FS_SECRM_FL>, C<FS_UNRM_FL>, C<FS_COMPR_FL>, C<FS_SYNC_FL>, C<FS_IMMUTABLE_FL>,
		1242	C<FS_APPEND_FL>, C<FS_NODUMP_FL>, C<FS_NOATIME_FL>, C<FS_DIRTY_FL>,
		1243	C<FS_COMPRBLK_FL>, C<FS_NOCOMP_FL>, C<FS_ENCRYPT_FL>, C<FS_BTREE_FL>,
		1244	C<FS_INDEX_FL>, C<FS_JOURNAL_DATA_FL>, C<FS_NOTAIL_FL>, C<FS_DIRSYNC_FL>, C<FS_TOPDIR_FL>,
		1245	C<FS_FL_USER_MODIFIABLE>.
		1246
		1247	C<FS_XFLAG_REALTIME>, C<FS_XFLAG_PREALLOC>, C<FS_XFLAG_IMMUTABLE>, C<FS_XFLAG_APPEND>,
		1248	C<FS_XFLAG_SYNC>, C<FS_XFLAG_NOATIME>, C<FS_XFLAG_NODUMP>, C<FS_XFLAG_RTINHERIT>,
		1249	C<FS_XFLAG_PROJINHERIT>, C<FS_XFLAG_NOSYMLINKS>, C<FS_XFLAG_EXTSIZE>, C<FS_XFLAG_EXTSZINHERIT>,
		1250	C<FS_XFLAG_NODEFRAG>, C<FS_XFLAG_FILESTREAM>, C<FS_XFLAG_DAX>, C<FS_XFLAG_HASATTR>,
		1251
926	=item aio_sync $callback->($status)	1252	=item aio_sync $callback->($status)
927		1253
928	Asynchronously call sync and call the callback when finished.	1254	Asynchronously call sync and call the callback when finished.
929		1255
930	=item aio_fsync $fh, $callback->($status)	1256	=item aio_fsync $fh, $callback->($status)
…		…
937	Asynchronously call fdatasync on the given filehandle and call the	1263	Asynchronously call fdatasync on the given filehandle and call the
938	callback with the fdatasync result code.	1264	callback with the fdatasync result code.
939		1265
940	If this call isn't available because your OS lacks it or it couldn't be	1266	If this call isn't available because your OS lacks it or it couldn't be
941	detected, it will be emulated by calling C<fsync> instead.	1267	detected, it will be emulated by calling C<fsync> instead.
		1268
		1269	=item aio_syncfs $fh, $callback->($status)
		1270
		1271	Asynchronously call the syncfs syscall to sync the filesystem associated
		1272	to the given filehandle and call the callback with the syncfs result
		1273	code. If syncfs is not available, calls sync(), but returns C<-1> and sets
		1274	errno to C<ENOSYS> nevertheless.
942		1275
943	=item aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)	1276	=item aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)
944		1277
945	Sync the data portion of the file specified by C<$offset> and C<$length>	1278	Sync the data portion of the file specified by C<$offset> and C<$length>
946	to disk (but NOT the metadata), by calling the Linux-specific	1279	to disk (but NOT the metadata), by calling the Linux-specific
…		…
950	C<$flags> can be a combination of C<IO::AIO::SYNC_FILE_RANGE_WAIT_BEFORE>,	1283	C<$flags> can be a combination of C<IO::AIO::SYNC_FILE_RANGE_WAIT_BEFORE>,
951	C<IO::AIO::SYNC_FILE_RANGE_WRITE> and	1284	C<IO::AIO::SYNC_FILE_RANGE_WRITE> and
952	C<IO::AIO::SYNC_FILE_RANGE_WAIT_AFTER>: refer to the sync_file_range	1285	C<IO::AIO::SYNC_FILE_RANGE_WAIT_AFTER>: refer to the sync_file_range
953	manpage for details.	1286	manpage for details.
954		1287
955	=item aio_pathsync $path, $callback->($status)	1288	=item aio_pathsync $pathname, $callback->($status)
956		1289
957	This request tries to open, fsync and close the given path. This is a	1290	This request tries to open, fsync and close the given path. This is a
958	composite request intended to sync directories after directory operations	1291	composite request intended to sync directories after directory operations
959	(E.g. rename). This might not work on all operating systems or have any	1292	(E.g. rename). This might not work on all operating systems or have any
960	specific effect, but usually it makes sure that directory changes get	1293	specific effect, but usually it makes sure that directory changes get
…		…
991	};	1324	};
992		1325
993	$grp	1326	$grp
994	}	1327	}
995		1328
996	=item aio_msync $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)	1329	=item aio_msync $scalar, $offset = 0, $length = undef, flags = MS_SYNC, $callback->($status)
997		1330
998	This is a rather advanced IO::AIO call, which only works on mmap(2)ed	1331	This is a rather advanced IO::AIO call, which only works on mmap(2)ed
999	scalars (see the L<Sys::Mmap> or L<Mmap> modules for details on this, note	1332	scalars (see the C<IO::AIO::mmap> function, although it also works on data
		1333	scalars managed by the L<Sys::Mmap> or L<Mmap> modules, note that the
1000	that the scalar must only be modified in-place while an aio operation is	1334	scalar must only be modified in-place while an aio operation is pending on
1001	pending on it).	1335	it).
1002		1336
1003	It calls the C<msync> function of your OS, if available, with the memory	1337	It calls the C<msync> function of your OS, if available, with the memory
1004	area starting at C<$offset> in the string and ending C<$length> bytes	1338	area starting at C<$offset> in the string and ending C<$length> bytes
1005	later. If C<$length> is negative, counts from the end, and if C<$length>	1339	later. If C<$length> is negative, counts from the end, and if C<$length>
1006	is C<undef>, then it goes till the end of the string. The flags can be	1340	is C<undef>, then it goes till the end of the string. The flags can be
1007	a combination of C<IO::AIO::MS_ASYNC>, C<IO::AIO::MS_INVALIDATE> and	1341	either C<IO::AIO::MS_ASYNC> or C<IO::AIO::MS_SYNC>, plus an optional
1008	C<IO::AIO::MS_SYNC>.	1342	C<IO::AIO::MS_INVALIDATE>.
1009		1343
1010	=item aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)	1344	=item aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
1011		1345
1012	This is a rather advanced IO::AIO call, which works best on mmap(2)ed	1346	This is a rather advanced IO::AIO call, which works best on mmap(2)ed
1013	scalars.	1347	scalars.
1014		1348
1015	It touches (reads or writes) all memory pages in the specified	1349	It touches (reads or writes) all memory pages in the specified
1016	range inside the scalar. All caveats and parameters are the same	1350	range inside the scalar. All caveats and parameters are the same
1017	as for C<aio_msync>, above, except for flags, which must be either	1351	as for C<aio_msync>, above, except for flags, which must be either
1018	C<0> (which reads all pages and ensures they are instantiated) or	1352	C<0> (which reads all pages and ensures they are instantiated) or
1019	C<IO::AIO::MT_MODIFY>, which modifies the memory page s(by reading and	1353	C<IO::AIO::MT_MODIFY>, which modifies the memory pages (by reading and
1020	writing an octet from it, which dirties the page).	1354	writing an octet from it, which dirties the page).
		1355
		1356	=item aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
		1357
		1358	This is a rather advanced IO::AIO call, which works best on mmap(2)ed
		1359	scalars.
		1360
		1361	It reads in all the pages of the underlying storage into memory (if any)
		1362	and locks them, so they are not getting swapped/paged out or removed.
		1363
		1364	If C<$length> is undefined, then the scalar will be locked till the end.
		1365
		1366	On systems that do not implement C<mlock>, this function returns C<-1>
		1367	and sets errno to C<ENOSYS>.
		1368
		1369	Note that the corresponding C<munlock> is synchronous and is
		1370	documented under L<MISCELLANEOUS FUNCTIONS>.
		1371
		1372	Example: open a file, mmap and mlock it - both will be undone when
		1373	C<$data> gets destroyed.
		1374
		1375	open my $fh, "<", $path or die "$path: $!";
		1376	my $data;
		1377	IO::AIO::mmap $data, -s $fh, IO::AIO::PROT_READ, IO::AIO::MAP_SHARED, $fh;
		1378	aio_mlock $data; # mlock in background
		1379
		1380	=item aio_mlockall $flags, $callback->($status)
		1381
		1382	Calls the C<mlockall> function with the given C<$flags> (a combination of
		1383	C<IO::AIO::MCL_CURRENT> and C<IO::AIO::MCL_FUTURE>).
		1384
		1385	On systems that do not implement C<mlockall>, this function returns C<-1>
		1386	and sets errno to C<ENOSYS>.
		1387
		1388	Note that the corresponding C<munlockall> is synchronous and is
		1389	documented under L<MISCELLANEOUS FUNCTIONS>.
		1390
		1391	Example: asynchronously lock all current and future pages into memory.
		1392
		1393	aio_mlockall IO::AIO::MCL_FUTURE;
		1394
		1395	=item aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)
		1396
		1397	Queries the extents of the given file (by calling the Linux C<FIEMAP>
		1398	ioctl, see L<http://cvs.schmorp.de/IO-AIO/doc/fiemap.txt> for details). If
		1399	the ioctl is not available on your OS, then this request will fail with
		1400	C<ENOSYS>.
		1401
		1402	C<$start> is the starting offset to query extents for, C<$length> is the
		1403	size of the range to query - if it is C<undef>, then the whole file will
		1404	be queried.
		1405
		1406	C<$flags> is a combination of flags (C<IO::AIO::FIEMAP_FLAG_SYNC> or
		1407	C<IO::AIO::FIEMAP_FLAG_XATTR> - C<IO::AIO::FIEMAP_FLAGS_COMPAT> is also
		1408	exported), and is normally C<0> or C<IO::AIO::FIEMAP_FLAG_SYNC> to query
		1409	the data portion.
		1410
		1411	C<$count> is the maximum number of extent records to return. If it is
		1412	C<undef>, then IO::AIO queries all extents of the range. As a very special
		1413	case, if it is C<0>, then the callback receives the number of extents
		1414	instead of the extents themselves (which is unreliable, see below).
		1415
		1416	If an error occurs, the callback receives no arguments. The special
		1417	C<errno> value C<IO::AIO::EBADR> is available to test for flag errors.
		1418
		1419	Otherwise, the callback receives an array reference with extent
		1420	structures. Each extent structure is an array reference itself, with the
		1421	following members:
		1422
		1423	[$logical, $physical, $length, $flags]
		1424
		1425	Flags is any combination of the following flag values (typically either C<0>
		1426	or C<IO::AIO::FIEMAP_EXTENT_LAST> (1)):
		1427
		1428	C<IO::AIO::FIEMAP_EXTENT_LAST>, C<IO::AIO::FIEMAP_EXTENT_UNKNOWN>,
		1429	C<IO::AIO::FIEMAP_EXTENT_DELALLOC>, C<IO::AIO::FIEMAP_EXTENT_ENCODED>,
		1430	C<IO::AIO::FIEMAP_EXTENT_DATA_ENCRYPTED>, C<IO::AIO::FIEMAP_EXTENT_NOT_ALIGNED>,
		1431	C<IO::AIO::FIEMAP_EXTENT_DATA_INLINE>, C<IO::AIO::FIEMAP_EXTENT_DATA_TAIL>,
		1432	C<IO::AIO::FIEMAP_EXTENT_UNWRITTEN>, C<IO::AIO::FIEMAP_EXTENT_MERGED> or
		1433	C<IO::AIO::FIEMAP_EXTENT_SHARED>.
		1434
		1435	At the time of this writing (Linux 3.2), this request is unreliable unless
		1436	C<$count> is C<undef>, as the kernel has all sorts of bugs preventing
		1437	it to return all extents of a range for files with a large number of
		1438	extents. The code (only) works around all these issues if C<$count> is
		1439	C<undef>.
1021		1440
1022	=item aio_group $callback->(...)	1441	=item aio_group $callback->(...)
1023		1442
1024	This is a very special aio request: Instead of doing something, it is a	1443	This is a very special aio request: Instead of doing something, it is a
1025	container for other aio requests, which is useful if you want to bundle	1444	container for other aio requests, which is useful if you want to bundle
…		…
1062	like sleep and file handle readable/writable, the overhead this creates is	1481	like sleep and file handle readable/writable, the overhead this creates is
1063	immense (it blocks a thread for a long time) so do not use this function	1482	immense (it blocks a thread for a long time) so do not use this function
1064	except to put your application under artificial I/O pressure.	1483	except to put your application under artificial I/O pressure.
1065		1484
1066	=back	1485	=back
		1486
		1487
		1488	=head2 IO::AIO::WD - multiple working directories
		1489
		1490	Your process only has one current working directory, which is used by all
		1491	threads. This makes it hard to use relative paths (some other component
		1492	could call C<chdir> at any time, and it is hard to control when the path
		1493	will be used by IO::AIO).
		1494
		1495	One solution for this is to always use absolute paths. This usually works,
		1496	but can be quite slow (the kernel has to walk the whole path on every
		1497	access), and can also be a hassle to implement.
		1498
		1499	Newer POSIX systems have a number of functions (openat, fdopendir,
		1500	futimensat and so on) that make it possible to specify working directories
		1501	per operation.
		1502
		1503	For portability, and because the clowns who "designed", or shall I write,
		1504	perpetrated this new interface were obviously half-drunk, this abstraction
		1505	cannot be perfect, though.
		1506
		1507	IO::AIO allows you to convert directory paths into a so-called IO::AIO::WD
		1508	object. This object stores the canonicalised, absolute version of the
		1509	path, and on systems that allow it, also a directory file descriptor.
		1510
		1511	Everywhere where a pathname is accepted by IO::AIO (e.g. in C<aio_stat>
		1512	or C<aio_unlink>), one can specify an array reference with an IO::AIO::WD
		1513	object and a pathname instead (or the IO::AIO::WD object alone, which
		1514	gets interpreted as C<[$wd, "."]>). If the pathname is absolute, the
		1515	IO::AIO::WD object is ignored, otherwise the pathname is resolved relative
		1516	to that IO::AIO::WD object.
		1517
		1518	For example, to get a wd object for F</etc> and then stat F<passwd>
		1519	inside, you would write:
		1520
		1521	aio_wd "/etc", sub {
		1522	my $etcdir = shift;
		1523
		1524	# although $etcdir can be undef on error, there is generally no reason
		1525	# to check for errors here, as aio_stat will fail with ENOENT
		1526	# when $etcdir is undef.
		1527
		1528	aio_stat [$etcdir, "passwd"], sub {
		1529	# yay
		1530	};
		1531	};
		1532
		1533	The fact that C<aio_wd> is a request and not a normal function shows that
		1534	creating an IO::AIO::WD object is itself a potentially blocking operation,
		1535	which is why it is done asynchronously.
		1536
		1537	To stat the directory obtained with C<aio_wd> above, one could write
		1538	either of the following three request calls:
		1539
		1540	aio_lstat "/etc" , sub { ... # pathname as normal string
		1541	aio_lstat [$wd, "."], sub { ... # "." relative to $wd (i.e. $wd itself)
		1542	aio_lstat $wd , sub { ... # shorthand for the previous
		1543
		1544	As with normal pathnames, IO::AIO keeps a copy of the working directory
		1545	object and the pathname string, so you could write the following without
		1546	causing any issues due to C<$path> getting reused:
		1547
		1548	my $path = [$wd, undef];
		1549
		1550	for my $name (qw(abc def ghi)) {
		1551	$path->[1] = $name;
		1552	aio_stat $path, sub {
		1553	# ...
		1554	};
		1555	}
		1556
		1557	There are some caveats: when directories get renamed (or deleted), the
		1558	pathname string doesn't change, so will point to the new directory (or
		1559	nowhere at all), while the directory fd, if available on the system,
		1560	will still point to the original directory. Most functions accepting a
		1561	pathname will use the directory fd on newer systems, and the string on
		1562	older systems. Some functions (such as C<aio_realpath>) will always rely on
		1563	the string form of the pathname.
		1564
		1565	So this functionality is mainly useful to get some protection against
		1566	C<chdir>, to easily get an absolute path out of a relative path for future
		1567	reference, and to speed up doing many operations in the same directory
		1568	(e.g. when stat'ing all files in a directory).
		1569
		1570	The following functions implement this working directory abstraction:
		1571
		1572	=over 4
		1573
		1574	=item aio_wd $pathname, $callback->($wd)
		1575
		1576	Asynchonously canonicalise the given pathname and convert it to an
		1577	IO::AIO::WD object representing it. If possible and supported on the
		1578	system, also open a directory fd to speed up pathname resolution relative
		1579	to this working directory.
		1580
		1581	If something goes wrong, then C<undef> is passwd to the callback instead
		1582	of a working directory object and C<$!> is set appropriately. Since
		1583	passing C<undef> as working directory component of a pathname fails the
		1584	request with C<ENOENT>, there is often no need for error checking in the
		1585	C<aio_wd> callback, as future requests using the value will fail in the
		1586	expected way.
		1587
		1588	=item IO::AIO::CWD
		1589
		1590	This is a compiletime constant (object) that represents the process
		1591	current working directory.
		1592
		1593	Specifying this object as working directory object for a pathname is as if
		1594	the pathname would be specified directly, without a directory object. For
		1595	example, these calls are functionally identical:
		1596
		1597	aio_stat "somefile", sub { ... };
		1598	aio_stat [IO::AIO::CWD, "somefile"], sub { ... };
		1599
		1600	=back
		1601
		1602	To recover the path associated with an IO::AIO::WD object, you can use
		1603	C<aio_realpath>:
		1604
		1605	aio_realpath $wd, sub {
		1606	warn "path is $_[0]\n";
		1607	};
		1608
		1609	Currently, C<aio_statvfs> always, and C<aio_rename> and C<aio_rmdir>
		1610	sometimes, fall back to using an absolue path.
1067		1611
1068	=head2 IO::AIO::REQ CLASS	1612	=head2 IO::AIO::REQ CLASS
1069		1613
1070	All non-aggregate C<aio_*> functions return an object of this class when	1614	All non-aggregate C<aio_*> functions return an object of this class when
1071	called in non-void context.	1615	called in non-void context.
…		…
1189		1733
1190	Sets a feeder/generator on this group: every group can have an attached	1734	Sets a feeder/generator on this group: every group can have an attached
1191	generator that generates requests if idle. The idea behind this is that,	1735	generator that generates requests if idle. The idea behind this is that,
1192	although you could just queue as many requests as you want in a group,	1736	although you could just queue as many requests as you want in a group,
1193	this might starve other requests for a potentially long time. For example,	1737	this might starve other requests for a potentially long time. For example,
1194	C<aio_scandir> might generate hundreds of thousands C<aio_stat> requests,	1738	C<aio_scandir> might generate hundreds of thousands of C<aio_stat>
1195	delaying any later requests for a long time.	1739	requests, delaying any later requests for a long time.
1196		1740
1197	To avoid this, and allow incremental generation of requests, you can	1741	To avoid this, and allow incremental generation of requests, you can
1198	instead a group and set a feeder on it that generates those requests. The	1742	instead a group and set a feeder on it that generates those requests. The
1199	feed callback will be called whenever there are few enough (see C<limit>,	1743	feed callback will be called whenever there are few enough (see C<limit>,
1200	below) requests active in the group itself and is expected to queue more	1744	below) requests active in the group itself and is expected to queue more
…		…
1249		1793
1250	See C<poll_cb> for an example.	1794	See C<poll_cb> for an example.
1251		1795
1252	=item IO::AIO::poll_cb	1796	=item IO::AIO::poll_cb
1253		1797
1254	Process some outstanding events on the result pipe. You have to call this	1798	Process some requests that have reached the result phase (i.e. they have
1255	regularly. Returns C<0> if all events could be processed, or C<-1> if it	1799	been executed but the results are not yet reported). You have to call
1256	returned earlier for whatever reason. Returns immediately when no events	1800	this "regularly" to finish outstanding requests.
1257	are outstanding. The amount of events processed depends on the settings of
1258	C<IO::AIO::max_poll_req> and C<IO::AIO::max_poll_time>.
1259		1801
		1802	Returns C<0> if all events could be processed (or there were no
		1803	events to process), or C<-1> if it returned earlier for whatever
		1804	reason. Returns immediately when no events are outstanding. The amount
		1805	of events processed depends on the settings of C<IO::AIO::max_poll_req>,
		1806	C<IO::AIO::max_poll_time> and C<IO::AIO::max_outstanding>.
		1807
1260	If not all requests were processed for whatever reason, the filehandle	1808	If not all requests were processed for whatever reason, the poll file
1261	will still be ready when C<poll_cb> returns, so normally you don't have to	1809	descriptor will still be ready when C<poll_cb> returns, so normally you
1262	do anything special to have it called later.	1810	don't have to do anything special to have it called later.
		1811
		1812	Apart from calling C<IO::AIO::poll_cb> when the event filehandle becomes
		1813	ready, it can be beneficial to call this function from loops which submit
		1814	a lot of requests, to make sure the results get processed when they become
		1815	available and not just when the loop is finished and the event loop takes
		1816	over again. This function returns very fast when there are no outstanding
		1817	requests.
1263		1818
1264	Example: Install an Event watcher that automatically calls	1819	Example: Install an Event watcher that automatically calls
1265	IO::AIO::poll_cb with high priority (more examples can be found in the	1820	IO::AIO::poll_cb with high priority (more examples can be found in the
1266	SYNOPSIS section, at the top of this document):	1821	SYNOPSIS section, at the top of this document):
1267		1822
1268	Event->io (fd => IO::AIO::poll_fileno,	1823	Event->io (fd => IO::AIO::poll_fileno,
1269	poll => 'r', async => 1,	1824	poll => 'r', async => 1,
1270	cb => \&IO::AIO::poll_cb);	1825	cb => \&IO::AIO::poll_cb);
		1826
		1827	=item IO::AIO::poll_wait
		1828
		1829	Wait until either at least one request is in the result phase or no
		1830	requests are outstanding anymore.
		1831
		1832	This is useful if you want to synchronously wait for some requests to
		1833	become ready, without actually handling them.
		1834
		1835	See C<nreqs> for an example.
		1836
		1837	=item IO::AIO::poll
		1838
		1839	Waits until some requests have been handled.
		1840
		1841	Returns the number of requests processed, but is otherwise strictly
		1842	equivalent to:
		1843
		1844	IO::AIO::poll_wait, IO::AIO::poll_cb
		1845
		1846	=item IO::AIO::flush
		1847
		1848	Wait till all outstanding AIO requests have been handled.
		1849
		1850	Strictly equivalent to:
		1851
		1852	IO::AIO::poll_wait, IO::AIO::poll_cb
		1853	while IO::AIO::nreqs;
1271		1854
1272	=item IO::AIO::max_poll_reqs $nreqs	1855	=item IO::AIO::max_poll_reqs $nreqs
1273		1856
1274	=item IO::AIO::max_poll_time $seconds	1857	=item IO::AIO::max_poll_time $seconds
1275		1858
…		…
1300	# use a low priority so other tasks have priority	1883	# use a low priority so other tasks have priority
1301	Event->io (fd => IO::AIO::poll_fileno,	1884	Event->io (fd => IO::AIO::poll_fileno,
1302	poll => 'r', nice => 1,	1885	poll => 'r', nice => 1,
1303	cb => &IO::AIO::poll_cb);	1886	cb => &IO::AIO::poll_cb);
1304		1887
1305	=item IO::AIO::poll_wait
1306
1307	If there are any outstanding requests and none of them in the result
1308	phase, wait till the result filehandle becomes ready for reading (simply
1309	does a C<select> on the filehandle. This is useful if you want to
1310	synchronously wait for some requests to finish).
1311
1312	See C<nreqs> for an example.
1313
1314	=item IO::AIO::poll
1315
1316	Waits until some requests have been handled.
1317
1318	Returns the number of requests processed, but is otherwise strictly
1319	equivalent to:
1320
1321	IO::AIO::poll_wait, IO::AIO::poll_cb
1322
1323	=item IO::AIO::flush
1324
1325	Wait till all outstanding AIO requests have been handled.
1326
1327	Strictly equivalent to:
1328
1329	IO::AIO::poll_wait, IO::AIO::poll_cb
1330	while IO::AIO::nreqs;
1331
1332	=back	1888	=back
1333		1889
1334	=head3 CONTROLLING THE NUMBER OF THREADS	1890	=head3 CONTROLLING THE NUMBER OF THREADS
1335		1891
1336	=over	1892	=over
…		…
1369		1925
1370	Under normal circumstances you don't need to call this function.	1926	Under normal circumstances you don't need to call this function.
1371		1927
1372	=item IO::AIO::max_idle $nthreads	1928	=item IO::AIO::max_idle $nthreads
1373		1929
1374	Limit the number of threads (default: 4) that are allowed to idle (i.e.,	1930	Limit the number of threads (default: 4) that are allowed to idle
1375	threads that did not get a request to process within 10 seconds). That	1931	(i.e., threads that did not get a request to process within the idle
1376	means if a thread becomes idle while C<$nthreads> other threads are also	1932	timeout (default: 10 seconds). That means if a thread becomes idle while
1377	idle, it will free its resources and exit.	1933	C<$nthreads> other threads are also idle, it will free its resources and
		1934	exit.
1378		1935
1379	This is useful when you allow a large number of threads (e.g. 100 or 1000)	1936	This is useful when you allow a large number of threads (e.g. 100 or 1000)
1380	to allow for extremely high load situations, but want to free resources	1937	to allow for extremely high load situations, but want to free resources
1381	under normal circumstances (1000 threads can easily consume 30MB of RAM).	1938	under normal circumstances (1000 threads can easily consume 30MB of RAM).
1382		1939
1383	The default is probably ok in most situations, especially if thread	1940	The default is probably ok in most situations, especially if thread
1384	creation is fast. If thread creation is very slow on your system you might	1941	creation is fast. If thread creation is very slow on your system you might
1385	want to use larger values.	1942	want to use larger values.
1386		1943
		1944	=item IO::AIO::idle_timeout $seconds
		1945
		1946	Sets the minimum idle timeout (default 10) after which worker threads are
		1947	allowed to exit. SEe C<IO::AIO::max_idle>.
		1948
1387	=item IO::AIO::max_outstanding $maxreqs	1949	=item IO::AIO::max_outstanding $maxreqs
		1950
		1951	Sets the maximum number of outstanding requests to C<$nreqs>. If
		1952	you do queue up more than this number of requests, the next call to
		1953	C<IO::AIO::poll_cb> (and other functions calling C<poll_cb>, such as
		1954	C<IO::AIO::flush> or C<IO::AIO::poll>) will block until the limit is no
		1955	longer exceeded.
		1956
		1957	In other words, this setting does not enforce a queue limit, but can be
		1958	used to make poll functions block if the limit is exceeded.
1388		1959
1389	This is a very bad function to use in interactive programs because it	1960	This is a very bad function to use in interactive programs because it
1390	blocks, and a bad way to reduce concurrency because it is inexact: Better	1961	blocks, and a bad way to reduce concurrency because it is inexact: Better
1391	use an C<aio_group> together with a feed callback.	1962	use an C<aio_group> together with a feed callback.
1392		1963
1393	Sets the maximum number of outstanding requests to C<$nreqs>. If you	1964	Its main use is in scripts without an event loop - when you want to stat
1394	do queue up more than this number of requests, the next call to the	1965	a lot of files, you can write something like this:
1395	C<poll_cb> (and C<poll_some> and other functions calling C<poll_cb>)
1396	function will block until the limit is no longer exceeded.
1397		1966
1398	The default value is very large, so there is no practical limit on the	1967	IO::AIO::max_outstanding 32;
1399	number of outstanding requests.
1400		1968
1401	You can still queue as many requests as you want. Therefore,	1969	for my $path (...) {
1402	C<max_outstanding> is mainly useful in simple scripts (with low values) or	1970	aio_stat $path , ...;
1403	as a stop gap to shield against fatal memory overflow (with large values).	1971	IO::AIO::poll_cb;
		1972	}
		1973
		1974	IO::AIO::flush;
		1975
		1976	The call to C<poll_cb> inside the loop will normally return instantly, but
		1977	as soon as more thna C<32> reqeusts are in-flight, it will block until
		1978	some requests have been handled. This keeps the loop from pushing a large
		1979	number of C<aio_stat> requests onto the queue.
		1980
		1981	The default value for C<max_outstanding> is very large, so there is no
		1982	practical limit on the number of outstanding requests.
1404		1983
1405	=back	1984	=back
1406		1985
1407	=head3 STATISTICAL INFORMATION	1986	=head3 STATISTICAL INFORMATION
1408		1987
…		…
1430		2009
1431	=back	2010	=back
1432		2011
1433	=head3 MISCELLANEOUS FUNCTIONS	2012	=head3 MISCELLANEOUS FUNCTIONS
1434		2013
1435	IO::AIO implements some functions that might be useful, but are not	2014	IO::AIO implements some functions that are useful when you want to use
1436	asynchronous.	2015	some "Advanced I/O" function not available to in Perl, without going the
		2016	"Asynchronous I/O" route. Many of these have an asynchronous C<aio_*>
		2017	counterpart.
1437		2018
1438	=over 4	2019	=over 4
		2020
		2021	=item $numfd = IO::AIO::get_fdlimit
		2022
		2023	This function is I<EXPERIMENTAL> and subject to change.
		2024
		2025	Tries to find the current file descriptor limit and returns it, or
		2026	C<undef> and sets C<$!> in case of an error. The limit is one larger than
		2027	the highest valid file descriptor number.
		2028
		2029	=item IO::AIO::min_fdlimit [$numfd]
		2030
		2031	This function is I<EXPERIMENTAL> and subject to change.
		2032
		2033	Try to increase the current file descriptor limit(s) to at least C<$numfd>
		2034	by changing the soft or hard file descriptor resource limit. If C<$numfd>
		2035	is missing, it will try to set a very high limit, although this is not
		2036	recommended when you know the actual minimum that you require.
		2037
		2038	If the limit cannot be raised enough, the function makes a best-effort
		2039	attempt to increase the limit as much as possible, using various
		2040	tricks, while still failing. You can query the resulting limit using
		2041	C<IO::AIO::get_fdlimit>.
		2042
		2043	If an error occurs, returns C<undef> and sets C<$!>, otherwise returns
		2044	true.
1439		2045
1440	=item IO::AIO::sendfile $ofh, $ifh, $offset, $count	2046	=item IO::AIO::sendfile $ofh, $ifh, $offset, $count
1441		2047
1442	Calls the C<eio_sendfile_sync> function, which is like C<aio_sendfile>,	2048	Calls the C<eio_sendfile_sync> function, which is like C<aio_sendfile>,
1443	but is blocking (this makes most sense if you know the input data is	2049	but is blocking (this makes most sense if you know the input data is
…		…
1446		2052
1447	Returns the number of bytes copied, or C<-1> on error.	2053	Returns the number of bytes copied, or C<-1> on error.
1448		2054
1449	=item IO::AIO::fadvise $fh, $offset, $len, $advice	2055	=item IO::AIO::fadvise $fh, $offset, $len, $advice
1450		2056
1451	Simply calls the C<posix_fadvise> function (see it's	2057	Simply calls the C<posix_fadvise> function (see its
1452	manpage for details). The following advice constants are	2058	manpage for details). The following advice constants are
1453	avaiable: C<IO::AIO::FADV_NORMAL>, C<IO::AIO::FADV_SEQUENTIAL>,	2059	available: C<IO::AIO::FADV_NORMAL>, C<IO::AIO::FADV_SEQUENTIAL>,
1454	C<IO::AIO::FADV_RANDOM>, C<IO::AIO::FADV_NOREUSE>,	2060	C<IO::AIO::FADV_RANDOM>, C<IO::AIO::FADV_NOREUSE>,
1455	C<IO::AIO::FADV_WILLNEED>, C<IO::AIO::FADV_DONTNEED>.	2061	C<IO::AIO::FADV_WILLNEED>, C<IO::AIO::FADV_DONTNEED>.
1456		2062
1457	On systems that do not implement C<posix_fadvise>, this function returns	2063	On systems that do not implement C<posix_fadvise>, this function returns
1458	ENOSYS, otherwise the return value of C<posix_fadvise>.	2064	ENOSYS, otherwise the return value of C<posix_fadvise>.
1459		2065
		2066	=item IO::AIO::madvise $scalar, $offset, $len, $advice
		2067
		2068	Simply calls the C<posix_madvise> function (see its
		2069	manpage for details). The following advice constants are
		2070	available: C<IO::AIO::MADV_NORMAL>, C<IO::AIO::MADV_SEQUENTIAL>,
		2071	C<IO::AIO::MADV_RANDOM>, C<IO::AIO::MADV_WILLNEED>,
		2072	C<IO::AIO::MADV_DONTNEED>.
		2073
		2074	If C<$offset> is negative, counts from the end. If C<$length> is negative,
		2075	the remaining length of the C<$scalar> is used. If possible, C<$length>
		2076	will be reduced to fit into the C<$scalar>.
		2077
		2078	On systems that do not implement C<posix_madvise>, this function returns
		2079	ENOSYS, otherwise the return value of C<posix_madvise>.
		2080
		2081	=item IO::AIO::mprotect $scalar, $offset, $len, $protect
		2082
		2083	Simply calls the C<mprotect> function on the preferably AIO::mmap'ed
		2084	$scalar (see its manpage for details). The following protect
		2085	constants are available: C<IO::AIO::PROT_NONE>, C<IO::AIO::PROT_READ>,
		2086	C<IO::AIO::PROT_WRITE>, C<IO::AIO::PROT_EXEC>.
		2087
		2088	If C<$offset> is negative, counts from the end. If C<$length> is negative,
		2089	the remaining length of the C<$scalar> is used. If possible, C<$length>
		2090	will be reduced to fit into the C<$scalar>.
		2091
		2092	On systems that do not implement C<mprotect>, this function returns
		2093	ENOSYS, otherwise the return value of C<mprotect>.
		2094
		2095	=item IO::AIO::mmap $scalar, $length, $prot, $flags, $fh[, $offset]
		2096
		2097	Memory-maps a file (or anonymous memory range) and attaches it to the
		2098	given C<$scalar>, which will act like a string scalar. Returns true on
		2099	success, and false otherwise.
		2100
		2101	The scalar must exist, but its contents do not matter - this means you
		2102	cannot use a nonexistant array or hash element. When in doubt, C<undef>
		2103	the scalar first.
		2104
		2105	The only operations allowed on the mmapped scalar are C<substr>/C<vec>,
		2106	which don't change the string length, and most read-only operations such
		2107	as copying it or searching it with regexes and so on.
		2108
		2109	Anything else is unsafe and will, at best, result in memory leaks.
		2110
		2111	The memory map associated with the C<$scalar> is automatically removed
		2112	when the C<$scalar> is undef'd or destroyed, or when the C<IO::AIO::mmap>
		2113	or C<IO::AIO::munmap> functions are called on it.
		2114
		2115	This calls the C<mmap>(2) function internally. See your system's manual
		2116	page for details on the C<$length>, C<$prot> and C<$flags> parameters.
		2117
		2118	The C<$length> must be larger than zero and smaller than the actual
		2119	filesize.
		2120
		2121	C<$prot> is a combination of C<IO::AIO::PROT_NONE>, C<IO::AIO::PROT_EXEC>,
		2122	C<IO::AIO::PROT_READ> and/or C<IO::AIO::PROT_WRITE>,
		2123
		2124	C<$flags> can be a combination of
		2125	C<IO::AIO::MAP_SHARED> or
		2126	C<IO::AIO::MAP_PRIVATE>,
		2127	or a number of system-specific flags (when not available, the are C<0>):
		2128	C<IO::AIO::MAP_ANONYMOUS> (which is set to C<MAP_ANON> if your system only provides this constant),
		2129	C<IO::AIO::MAP_LOCKED>,
		2130	C<IO::AIO::MAP_NORESERVE>,
		2131	C<IO::AIO::MAP_POPULATE>,
		2132	C<IO::AIO::MAP_NONBLOCK>,
		2133	C<IO::AIO::MAP_FIXED>,
		2134	C<IO::AIO::MAP_GROWSDOWN>,
		2135	C<IO::AIO::MAP_32BIT>,
		2136	C<IO::AIO::MAP_HUGETLB> or
		2137	C<IO::AIO::MAP_STACK>.
		2138
		2139	If C<$fh> is C<undef>, then a file descriptor of C<-1> is passed.
		2140
		2141	C<$offset> is the offset from the start of the file - it generally must be
		2142	a multiple of C<IO::AIO::PAGESIZE> and defaults to C<0>.
		2143
		2144	Example:
		2145
		2146	use Digest::MD5;
		2147	use IO::AIO;
		2148
		2149	open my $fh, "<verybigfile"
		2150	or die "$!";
		2151
		2152	IO::AIO::mmap my $data, -s $fh, IO::AIO::PROT_READ, IO::AIO::MAP_SHARED, $fh
		2153	or die "verybigfile: $!";
		2154
		2155	my $fast_md5 = md5 $data;
		2156
		2157	=item IO::AIO::munmap $scalar
		2158
		2159	Removes a previous mmap and undefines the C<$scalar>.
		2160
		2161	=item IO::AIO::munlock $scalar, $offset = 0, $length = undef
		2162
		2163	Calls the C<munlock> function, undoing the effects of a previous
		2164	C<aio_mlock> call (see its description for details).
		2165
		2166	=item IO::AIO::munlockall
		2167
		2168	Calls the C<munlockall> function.
		2169
		2170	On systems that do not implement C<munlockall>, this function returns
		2171	ENOSYS, otherwise the return value of C<munlockall>.
		2172
		2173	=item IO::AIO::splice $r_fh, $r_off, $w_fh, $w_off, $length, $flags
		2174
		2175	Calls the GNU/Linux C<splice(2)> syscall, if available. If C<$r_off> or
		2176	C<$w_off> are C<undef>, then C<NULL> is passed for these, otherwise they
		2177	should be the file offset.
		2178
		2179	C<$r_fh> and C<$w_fh> should not refer to the same file, as splice might
		2180	silently corrupt the data in this case.
		2181
		2182	The following symbol flag values are available: C<IO::AIO::SPLICE_F_MOVE>,
		2183	C<IO::AIO::SPLICE_F_NONBLOCK>, C<IO::AIO::SPLICE_F_MORE> and
		2184	C<IO::AIO::SPLICE_F_GIFT>.
		2185
		2186	See the C<splice(2)> manpage for details.
		2187
		2188	=item IO::AIO::tee $r_fh, $w_fh, $length, $flags
		2189
		2190	Calls the GNU/Linux C<tee(2)> syscall, see its manpage and the
		2191	description for C<IO::AIO::splice> above for details.
		2192
		2193	=item $actual_size = IO::AIO::pipesize $r_fh[, $new_size]
		2194
		2195	Attempts to query or change the pipe buffer size. Obviously works only
		2196	on pipes, and currently works only on GNU/Linux systems, and fails with
		2197	C<-1>/C<ENOSYS> everywhere else. If anybody knows how to influence pipe buffer
		2198	size on other systems, drop me a note.
		2199
		2200	=item ($rfh, $wfh) = IO::AIO::pipe2 [$flags]
		2201
		2202	This is a direct interface to the Linux L<pipe2(2)> system call. If
		2203	C<$flags> is missing or C<0>, then this should be the same as a call to
		2204	perl's built-in C<pipe> function and create a new pipe, and works on
		2205	systems that lack the pipe2 syscall. On win32, this case invokes C<_pipe
		2206	(..., 4096, O_BINARY)>.
		2207
		2208	If C<$flags> is non-zero, it tries to invoke the pipe2 system call with
		2209	the given flags (Linux 2.6.27, glibc 2.9).
		2210
		2211	On success, the read and write file handles are returned.
		2212
		2213	On error, nothing will be returned. If the pipe2 syscall is missing and
		2214	C<$flags> is non-zero, fails with C<ENOSYS>.
		2215
		2216	Please refer to L<pipe2(2)> for more info on the C<$flags>, but at the
		2217	time of this writing, C<IO::AIO::O_CLOEXEC>, C<IO::AIO::O_NONBLOCK> and
		2218	C<IO::AIO::O_DIRECT> (Linux 3.4, for packet-based pipes) were supported.
		2219
		2220	Example: create a pipe race-free w.r.t. threads and fork:
		2221
		2222	my ($rfh, $wfh) = IO::AIO::pipe2 IO::AIO::O_CLOEXEC
		2223	or die "pipe2: $!\n";
		2224
		2225	=item $fh = IO::AIO::eventfd [$initval, [$flags]]
		2226
		2227	This is a direct interface to the Linux L<eventfd(2)> system call. The
		2228	(unhelpful) defaults for C<$initval> and C<$flags> are C<0> for both.
		2229
		2230	On success, the new eventfd filehandle is returned, otherwise returns
		2231	C<undef>. If the eventfd syscall is missing, fails with C<ENOSYS>.
		2232
		2233	Please refer to L<eventfd(2)> for more info on this call.
		2234
		2235	The following symbol flag values are available: C<IO::AIO::EFD_CLOEXEC>,
		2236	C<IO::AIO::EFD_NONBLOCK> and C<IO::AIO::EFD_SEMAPHORE> (Linux 2.6.30).
		2237
		2238	Example: create a new eventfd filehandle:
		2239
		2240	$fh = IO::AIO::eventfd 0, IO::AIO::O_CLOEXEC
		2241	or die "eventfd: $!\n";
		2242
		2243	=item $fh = IO::AIO::timerfd_create $clockid[, $flags]
		2244
		2245	This is a direct interface to the Linux L<timerfd_create(2)> system call. The
		2246	(unhelpful) default for C<$flags> is C<0>.
		2247
		2248	On success, the new timerfd filehandle is returned, otherwise returns
		2249	C<undef>. If the eventfd syscall is missing, fails with C<ENOSYS>.
		2250
		2251	Please refer to L<timerfd_create(2)> for more info on this call.
		2252
		2253	The following C<$clockid> values are
		2254	available: C<IO::AIO::CLOCK_REALTIME>, C<IO::AIO::CLOCK_MONOTONIC>
		2255	C<IO::AIO::CLOCK_CLOCK_BOOTTIME> (Linux 3.15)
		2256	C<IO::AIO::CLOCK_CLOCK_REALTIME_ALARM> (Linux 3.11) and
		2257	C<IO::AIO::CLOCK_CLOCK_BOOTTIME_ALARM> (Linux 3.11).
		2258
		2259	The following C<$flags> values are available (Linux
		2260	2.6.27): C<IO::AIO::TFD_NONBLOCK> and C<IO::AIO::TFD_CLOEXEC>.
		2261
		2262	Example: create a new timerfd and set it to one-second repeated alarms,
		2263	then wait for two alarms:
		2264
		2265	my $fh = IO::AIO::timerfd_create IO::AIO::CLOCK_BOOTTIME, IO::AIO::TFD_CLOEXEC
		2266	or die "timerfd_create: $!\n";
		2267
		2268	defined IO::AIO::timerfd_settime $fh, 0, 1, 1
		2269	or die "timerfd_settime: $!\n";
		2270
		2271	for (1..2) {
		2272	8 == sysread $fh, my $buf, 8
		2273	or die "timerfd read failure\n";
		2274
		2275	printf "number of expirations (likely 1): %d\n",
		2276	unpack "Q", $buf;
		2277	}
		2278
		2279	=item ($cur_interval, $cur_value) = IO::AIO::timerfd_settime $fh, $flags, $new_interval, $nbw_value
		2280
		2281	This is a direct interface to the Linux L<timerfd_settime(2)> system
		2282	call. Please refer to its manpage for more info on this call.
		2283
		2284	The new itimerspec is specified using two (possibly fractional) second
		2285	values, C<$new_interval> and C<$new_value>).
		2286
		2287	On success, the current interval and value are returned (as per
		2288	C<timerfd_gettime>). On failure, the empty list is returned.
		2289
		2290	The following C<$flags> values are
		2291	available: C<IO::AIO::TFD_TIMER_ABSTIME> and
		2292	C<IO::AIO::TFD_TIMER_CANCEL_ON_SET>.
		2293
		2294	See C<IO::AIO::timerfd_create> for a full example.
		2295
		2296	=item ($cur_interval, $cur_value) = IO::AIO::timerfd_gettime $fh
		2297
		2298	This is a direct interface to the Linux L<timerfd_gettime(2)> system
		2299	call. Please refer to its manpage for more info on this call.
		2300
		2301	On success, returns the current values of interval and value for the given
		2302	timerfd (as potentially fractional second values). On failure, the empty
		2303	list is returned.
		2304
1460	=back	2305	=back
1461		2306
1462	=cut	2307	=cut
1463		2308
1464	min_parallel 8;	2309	min_parallel 8;
1465		2310
1466	END { flush }	2311	END { flush }
1467		2312
1468	1;	2313	1;
1469		2314
		2315	=head1 EVENT LOOP INTEGRATION
		2316
		2317	It is recommended to use L<AnyEvent::AIO> to integrate IO::AIO
		2318	automatically into many event loops:
		2319
		2320	# AnyEvent integration (EV, Event, Glib, Tk, POE, urxvt, pureperl...)
		2321	use AnyEvent::AIO;
		2322
		2323	You can also integrate IO::AIO manually into many event loops, here are
		2324	some examples of how to do this:
		2325
		2326	# EV integration
		2327	my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
		2328
		2329	# Event integration
		2330	Event->io (fd => IO::AIO::poll_fileno,
		2331	poll => 'r',
		2332	cb => \&IO::AIO::poll_cb);
		2333
		2334	# Glib/Gtk2 integration
		2335	add_watch Glib::IO IO::AIO::poll_fileno,
		2336	in => sub { IO::AIO::poll_cb; 1 };
		2337
		2338	# Tk integration
		2339	Tk::Event::IO->fileevent (IO::AIO::poll_fileno, "",
		2340	readable => \&IO::AIO::poll_cb);
		2341
		2342	# Danga::Socket integration
		2343	Danga::Socket->AddOtherFds (IO::AIO::poll_fileno =>
		2344	\&IO::AIO::poll_cb);
		2345
1470	=head2 FORK BEHAVIOUR	2346	=head2 FORK BEHAVIOUR
1471		2347
1472	This module should do "the right thing" when the process using it forks:	2348	Usage of pthreads in a program changes the semantics of fork
		2349	considerably. Specifically, only async-safe functions can be called after
		2350	fork. Perl doesn't know about this, so in general, you cannot call fork
		2351	with defined behaviour in perl if pthreads are involved. IO::AIO uses
		2352	pthreads, so this applies, but many other extensions and (for inexplicable
		2353	reasons) perl itself often is linked against pthreads, so this limitation
		2354	applies to quite a lot of perls.
1473		2355
1474	Before the fork, IO::AIO enters a quiescent state where no requests	2356	This module no longer tries to fight your OS, or POSIX. That means IO::AIO
1475	can be added in other threads and no results will be processed. After	2357	only works in the process that loaded it. Forking is fully supported, but
1476	the fork the parent simply leaves the quiescent state and continues	2358	using IO::AIO in the child is not.
1477	request/result processing, while the child frees the request/result queue
1478	(so that the requests started before the fork will only be handled in the
1479	parent). Threads will be started on demand until the limit set in the
1480	parent process has been reached again.
1481		2359
1482	In short: the parent will, after a short pause, continue as if fork had	2360	You might get around by not I<using> IO::AIO before (or after)
1483	not been called, while the child will act as if IO::AIO has not been used	2361	forking. You could also try to call the L<IO::AIO::reinit> function in the
1484	yet.	2362	child:
		2363
		2364	=over 4
		2365
		2366	=item IO::AIO::reinit
		2367
		2368	Abandons all current requests and I/O threads and simply reinitialises all
		2369	data structures. This is not an operation supported by any standards, but
		2370	happens to work on GNU/Linux and some newer BSD systems.
		2371
		2372	The only reasonable use for this function is to call it after forking, if
		2373	C<IO::AIO> was used in the parent. Calling it while IO::AIO is active in
		2374	the process will result in undefined behaviour. Calling it at any time
		2375	will also result in any undefined (by POSIX) behaviour.
		2376
		2377	=back
		2378
		2379	=head2 LINUX-SPECIFIC CALLS
		2380
		2381	When a call is documented as "linux-specific" then this means it
		2382	originated on GNU/Linux. C<IO::AIO> will usually try to autodetect the
		2383	availability and compatibility of such calls regardless of the platform
		2384	it is compiled on, so platforms such as FreeBSD which often implement
		2385	these calls will work. When in doubt, call them and see if they fail wth
		2386	C<ENOSYS>.
1485		2387
1486	=head2 MEMORY USAGE	2388	=head2 MEMORY USAGE
1487		2389
1488	Per-request usage:	2390	Per-request usage:
1489		2391
…		…
1502	temporary buffers, and each thread requires a stack and other data	2404	temporary buffers, and each thread requires a stack and other data
1503	structures (usually around 16k-128k, depending on the OS).	2405	structures (usually around 16k-128k, depending on the OS).
1504		2406
1505	=head1 KNOWN BUGS	2407	=head1 KNOWN BUGS
1506		2408
1507	Known bugs will be fixed in the next release.	2409	Known bugs will be fixed in the next release :)
		2410
		2411	=head1 KNOWN ISSUES
		2412
		2413	Calls that try to "import" foreign memory areas (such as C<IO::AIO::mmap>
		2414	or C<IO::AIO::aio_slurp>) do not work with generic lvalues, such as
		2415	non-created hash slots or other scalars I didn't think of. It's best to
		2416	avoid such and either use scalar variables or making sure that the scalar
		2417	exists (e.g. by storing C<undef>) and isn't "funny" (e.g. tied).
		2418
		2419	I am not sure anything can be done about this, so this is considered a
		2420	known issue, rather than a bug.
1508		2421
1509	=head1 SEE ALSO	2422	=head1 SEE ALSO
1510		2423
1511	L<AnyEvent::AIO> for easy integration into event loops, L<Coro::AIO> for a	2424	L<AnyEvent::AIO> for easy integration into event loops, L<Coro::AIO> for a
1512	more natural syntax.	2425	more natural syntax.

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines