--- IO-AIO/AIO.pm 2005/07/10 18:16:49 1.2 +++ IO-AIO/AIO.pm 2011/06/29 11:25:17 1.198 @@ -6,124 +6,342 @@ use IO::AIO; + aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub { + my $fh = shift + or die "/etc/passwd: $!"; + ... + }; + + aio_unlink "/tmp/file", sub { }; + + aio_read $fh, 30000, 1024, $buffer, 0, sub { + $_[0] > 0 or die "read error: $!"; + }; + + # version 2+ has request and group objects + use IO::AIO 2; + + aioreq_pri 4; # give next request a very high priority + my $req = aio_unlink "/tmp/file", sub { }; + $req->cancel; # cancel request if still in queue + + my $grp = aio_group sub { print "all stats done\n" }; + add $grp aio_stat "..." for ...; + =head1 DESCRIPTION This module implements asynchronous I/O using whatever means your -operating system supports. +operating system supports. It is implemented as an interface to C +(L). -Currently, a number of threads are started that execute your read/writes -and signal their completion. You don't need thread support in your libc or -perl, and the threads created by this module will not be visible to the -pthreads library. In the future, this module might make use of the native -aio functions available on many operating systems. However, they are often -not well-supported (Linux doesn't allow them on normal files currently, -for example), and they would only support aio_read and aio_write, so the -remaining functionality would have to be implemented using threads anyway. +Asynchronous means that operations that can normally block your program +(e.g. reading from disk) will be done asynchronously: the operation +will still block, but you can do something else in the meantime. This +is extremely useful for programs that need to stay interactive even +when doing heavy I/O (GUI programs, high performance network servers +etc.), but can also be used to easily do operations in parallel that are +normally done sequentially, e.g. stat'ing many files, which is much faster +on a RAID volume or over NFS when you do a number of stat operations +concurrently. + +While most of this works on all types of file descriptors (for +example sockets), using these functions on file descriptors that +support nonblocking operation (again, sockets, pipes etc.) is +very inefficient. Use an event loop for that (such as the L +module): IO::AIO will naturally fit into such an event loop itself. + +In this version, a number of threads are started that execute your +requests and signal their completion. You don't need thread support +in perl, and the threads created by this module will not be visible +to perl. In the future, this module might make use of the native aio +functions available on many operating systems. However, they are often +not well-supported or restricted (GNU/Linux doesn't allow them on normal +files currently, for example), and they would only support aio_read and +aio_write, so the remaining functionality would have to be implemented +using threads anyway. + +Although the module will work in the presence of other (Perl-) threads, +it is currently not reentrant in any way, so use appropriate locking +yourself, always call C from within the same thread, or never +call C (or other C functions) recursively. + +=head2 EXAMPLE + +This is a simple example that uses the EV module and loads +F asynchronously: + + use Fcntl; + use EV; + use IO::AIO; + + # register the IO::AIO callback with EV + my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb; + + # queue the request to open /etc/passwd + aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub { + my $fh = shift + or die "error while opening: $!"; + + # stat'ing filehandles is generally non-blocking + my $size = -s $fh; + + # queue a request to read the file + my $contents; + aio_read $fh, 0, $size, $contents, 0, sub { + $_[0] == $size + or die "short read: $!"; + + close $fh; + + # file contents now in $contents + print $contents; + + # exit event loop and program + EV::unloop; + }; + }; -Although the module will work with in the presence of other threads, it is -currently not reentrant, so use appropriate locking yourself. + # possibly queue up other requests, or open GUI windows, + # check for sockets etc. etc. -=head2 API NOTES + # process events as long as there are some: + EV::loop; -All the C calls are more or less thin wrappers around the syscall -with the same name (sans C). The arguments are similar or identical, -and they all accept an additional C<$callback> argument which must be -a code reference. This code reference will get called with the syscall -return code (e.g. most syscalls return C<-1> on error, unlike perl, which -usually delivers "false") as it's sole argument when the given syscall has -been executed asynchronously. - -All functions that expect a filehandle will also accept a file descriptor. - -The filenames you pass to these routines I be absolute. The reason -is that at the time the request is being executed, the current working -directory could have changed. Alternatively, you can make sure that you -never change the current working directory. +=head1 REQUEST ANATOMY AND LIFETIME + +Every C function creates a request. which is a C data structure not +directly visible to Perl. + +If called in non-void context, every request function returns a Perl +object representing the request. In void context, nothing is returned, +which saves a bit of memory. + +The perl object is a fairly standard ref-to-hash object. The hash contents +are not used by IO::AIO so you are free to store anything you like in it. + +During their existance, aio requests travel through the following states, +in order: =over 4 +=item ready + +Immediately after a request is created it is put into the ready state, +waiting for a thread to execute it. + +=item execute + +A thread has accepted the request for processing and is currently +executing it (e.g. blocking in read). + +=item pending + +The request has been executed and is waiting for result processing. + +While request submission and execution is fully asynchronous, result +processing is not and relies on the perl interpreter calling C +(or another function with the same effect). + +=item result + +The request results are processed synchronously by C. + +The C function will process all outstanding aio requests by +calling their callbacks, freeing memory associated with them and managing +any groups they are contained in. + +=item done + +Request has reached the end of its lifetime and holds no resources anymore +(except possibly for the Perl object, but its connection to the actual +aio request is severed and calling its methods will either do nothing or +result in a runtime error). + +=back + =cut package IO::AIO; -use base 'Exporter'; +use Carp (); + +use common::sense; -use Fcntl (); +use base 'Exporter'; BEGIN { - $VERSION = 0.1; + our $VERSION = '3.91'; - @EXPORT = qw(aio_read aio_write aio_open aio_close aio_stat aio_lstat aio_unlink - aio_fsync aio_fdatasync aio_readahead); - @EXPORT_OK = qw(poll_fileno poll_cb min_parallel max_parallel nreqs); + our @AIO_REQ = qw(aio_sendfile aio_read aio_write aio_open aio_close + aio_stat aio_lstat aio_unlink aio_rmdir aio_readdir aio_readdirx + aio_scandir aio_symlink aio_readlink aio_sync aio_fsync + aio_fdatasync aio_sync_file_range aio_pathsync aio_readahead + aio_rename aio_link aio_move aio_copy aio_group + aio_nop aio_mknod aio_load aio_rmtree aio_mkdir aio_chown + aio_chmod aio_utime aio_truncate + aio_msync aio_mtouch aio_mlock aio_mlockall + aio_statvfs); + + our @EXPORT = (@AIO_REQ, qw(aioreq_pri aioreq_nice)); + our @EXPORT_OK = qw(poll_fileno poll_cb poll_wait flush + min_parallel max_parallel max_idle idle_timeout + nreqs nready npending nthreads + max_poll_time max_poll_reqs + sendfile fadvise madvise + mmap munmap munlock munlockall); - require XSLoader; - XSLoader::load IO::AIO, $VERSION; -} - -=item IO::AIO::min_parallel $nthreads + push @AIO_REQ, qw(aio_busy); # not exported -Set the minimum number of AIO threads to C<$nthreads>. The default is -C<1>, which means a single asynchronous operation can be done at one time -(the number of outstanding operations, however, is unlimited). - -It is recommended to keep the number of threads low, as some linux -kernel versions will scale negatively with the number of threads (higher -parallelity => MUCH higher latency). + @IO::AIO::GRP::ISA = 'IO::AIO::REQ'; -Under normal circumstances you don't need to call this function, as this -module automatically starts a single async thread. + require XSLoader; + XSLoader::load ("IO::AIO", $VERSION); +} -=item IO::AIO::max_parallel $nthreads +=head1 FUNCTIONS -Sets the maximum number of AIO threads to C<$nthreads>. If more than -the specified number of threads are currently running, kill them. This -function blocks until the limit is reached. +=head2 QUICK OVERVIEW -This module automatically runs C at program end, to ensure -that all threads are killed and that there are no outstanding requests. +This section simply lists the prototypes of the most important functions +for quick reference. See the following sections for function-by-function +documentation. + + aio_open $pathname, $flags, $mode, $callback->($fh) + aio_close $fh, $callback->($status) + aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval) + aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval) + aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval) + aio_readahead $fh,$offset,$length, $callback->($retval) + aio_stat $fh_or_path, $callback->($status) + aio_lstat $fh, $callback->($status) + aio_statvfs $fh_or_path, $callback->($statvfs) + aio_utime $fh_or_path, $atime, $mtime, $callback->($status) + aio_chown $fh_or_path, $uid, $gid, $callback->($status) + aio_truncate $fh_or_path, $offset, $callback->($status) + aio_chmod $fh_or_path, $mode, $callback->($status) + aio_unlink $pathname, $callback->($status) + aio_mknod $path, $mode, $dev, $callback->($status) + aio_link $srcpath, $dstpath, $callback->($status) + aio_symlink $srcpath, $dstpath, $callback->($status) + aio_readlink $path, $callback->($link) + aio_rename $srcpath, $dstpath, $callback->($status) + aio_mkdir $pathname, $mode, $callback->($status) + aio_rmdir $pathname, $callback->($status) + aio_readdir $pathname, $callback->($entries) + aio_readdirx $pathname, $flags, $callback->($entries, $flags) + IO::AIO::READDIR_DENTS IO::AIO::READDIR_DIRS_FIRST + IO::AIO::READDIR_STAT_ORDER IO::AIO::READDIR_FOUND_UNKNOWN + aio_load $path, $data, $callback->($status) + aio_copy $srcpath, $dstpath, $callback->($status) + aio_move $srcpath, $dstpath, $callback->($status) + aio_scandir $path, $maxreq, $callback->($dirs, $nondirs) + aio_rmtree $path, $callback->($status) + aio_sync $callback->($status) + aio_fsync $fh, $callback->($status) + aio_fdatasync $fh, $callback->($status) + aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status) + aio_pathsync $path, $callback->($status) + aio_msync $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status) + aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status) + aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status) + aio_mlockall $flags, $callback->($status) + aio_group $callback->(...) + aio_nop $callback->() + + $prev_pri = aioreq_pri [$pri] + aioreq_nice $pri_adjust + + IO::AIO::poll_wait + IO::AIO::poll_cb + IO::AIO::poll + IO::AIO::flush + IO::AIO::max_poll_reqs $nreqs + IO::AIO::max_poll_time $seconds + IO::AIO::min_parallel $nthreads + IO::AIO::max_parallel $nthreads + IO::AIO::max_idle $nthreads + IO::AIO::idle_timeout $seconds + IO::AIO::max_outstanding $maxreqs + IO::AIO::nreqs + IO::AIO::nready + IO::AIO::npending + + IO::AIO::sendfile $ofh, $ifh, $offset, $count + IO::AIO::fadvise $fh, $offset, $len, $advice + IO::AIO::madvise $scalar, $offset, $length, $advice + IO::AIO::mprotect $scalar, $offset, $length, $protect + IO::AIO::munlock $scalar, $offset = 0, $length = undef + IO::AIO::munlockall -Under normal circumstances you don't need to call this function. +=head2 AIO REQUEST FUNCTIONS -=item $fileno = IO::AIO::poll_fileno +All the C calls are more or less thin wrappers around the syscall +with the same name (sans C). The arguments are similar or identical, +and they all accept an additional (and optional) C<$callback> argument +which must be a code reference. This code reference will get called with +the syscall return code (e.g. most syscalls return C<-1> on error, unlike +perl, which usually delivers "false") as its sole argument after the given +syscall has been executed asynchronously. + +All functions expecting a filehandle keep a copy of the filehandle +internally until the request has finished. + +All functions return request objects of type L that allow +further manipulation of those requests while they are in-flight. + +The pathnames you pass to these routines I be absolute and +encoded as octets. The reason for the former is that at the time the +request is being executed, the current working directory could have +changed. Alternatively, you can make sure that you never change the +current working directory anywhere in the program and then use relative +paths. + +To encode pathnames as octets, either make sure you either: a) always pass +in filenames you got from outside (command line, readdir etc.) without +tinkering, b) are ASCII or ISO 8859-1, c) use the Encode module and encode +your pathnames to the locale (or other) encoding in effect in the user +environment, d) use Glib::filename_from_unicode on unicode filenames or e) +use something else to ensure your scalar has the correct contents. -Return the I. This filehandle must be -polled for reading by some mechanism outside this module (e.g. Event -or select, see below). If the pipe becomes readable you have to call -C to check the results. +This works, btw. independent of the internal UTF-8 bit, which IO::AIO +handles correctly whether it is set or not. -See C for an example. +=over 4 -=item IO::AIO::poll_cb +=item $prev_pri = aioreq_pri [$pri] -Process all outstanding events on the result pipe. You have to call this -regularly. Returns the number of events processed. Returns immediately -when no events are outstanding. +Returns the priority value that would be used for the next request and, if +C<$pri> is given, sets the priority for the next aio request. -You can use Event to multiplex, e.g.: +The default priority is C<0>, the minimum and maximum priorities are C<-4> +and C<4>, respectively. Requests with higher priority will be serviced +first. - Event->io (fd => IO::AIO::poll_fileno, - poll => 'r', async => 1, - cb => \&IO::AIO::poll_cb); +The priority will be reset to C<0> after each call to one of the C +functions. -=item IO::AIO::poll_wait +Example: open a file with low priority, then read something from it with +higher priority so the read request is serviced before other low priority +open requests (potentially spamming the cache): -Wait till the result filehandle becomes ready for reading (simply does a -select on the filehandle. This is useful if you want to synchronously wait -for some requests to finish). + aioreq_pri -3; + aio_open ..., sub { + return unless $_[0]; -See C for an example. + aioreq_pri -2; + aio_read $_[0], ..., sub { + ... + }; + }; -=item IO::AIO::nreqs -Returns the number of requests currently outstanding. +=item aioreq_nice $pri_adjust -Example: wait till there are no outstanding requests anymore: +Similar to C, but subtracts the given value from the current +priority, so the effect is cumulative. - IO::AIO::poll_wait, IO::AIO::poll_cb - while IO::AIO::nreqs; -=item aio_open $pathname, $flags, $mode, $callback +=item aio_open $pathname, $flags, $mode, $callback->($fh) Asynchronously open or create a file and call the callback with a newly created filehandle for the file. @@ -131,12 +349,19 @@ The pathname passed to C must be absolute. See API NOTES, above, for an explanation. -The C<$mode> argument is a bitmask. See the C module for a -list. They are the same as used in C. +The C<$flags> argument is a bitmask. See the C module for a +list. They are the same as used by C. + +Likewise, C<$mode> specifies the mode of the newly created file, if it +didn't exist and C has been given, just like perl's C, +except that it is mandatory (i.e. use C<0> if you don't create new files, +and C<0666> or C<0777> if you do). Note that the C<$mode> will be modified +by the umask in effect then the request is being executed, so better never +change the umask. Example: - aio_open "/etc/passwd", O_RDONLY, 0, sub { + aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub { if ($_[0]) { print "open successful, fh is $_[0]\n"; ... @@ -145,49 +370,128 @@ } }; -=item aio_close $fh, $callback +In addition to all the common open modes/flags (C, C, +C, C, C, C and C), the +following POSIX and non-POSIX constants are available (missing ones on +your system are, as usual, C<0>): + +C, C, C, C, C, C, +C, C, C, C, C, +C, C and C. + + +=item aio_close $fh, $callback->($status) Asynchronously close a file and call the callback with the result -code. I although accepted, you should not pass in a perl -filehandle here, as perl will likely close the file descriptor itself when -the filehandle is destroyed. Normally, you can safely call perls C -or just let filehandles go out of scope. +code. + +Unfortunately, you can't do this to perl. Perl I very strongly on +closing the file descriptor associated with the filehandle itself. + +Therefore, C will not close the filehandle - instead it will +use dup2 to overwrite the file descriptor with the write-end of a pipe +(the pipe fd will be created on demand and will be cached). + +Or in other words: the file descriptor will be closed, but it will not be +free for reuse until the perl filehandle is closed. -=item aio_read $fh,$offset,$length, $data,$dataoffset,$callback +=cut + +=item aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval) + +=item aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval) + +Reads or writes C<$length> bytes from or to the specified C<$fh> and +C<$offset> into the scalar given by C<$data> and offset C<$dataoffset> +and calls the callback without the actual number of bytes read (or -1 on +error, just like the syscall). -=item aio_write $fh,$offset,$length, $data,$dataoffset,$callback +C will, like C, shrink or grow the C<$data> scalar to +offset plus the actual number of bytes read. -Reads or writes C bytes from the specified C and C -into the scalar given by C and offset C and calls the -callback without the actual number of bytes read (or -1 on error, just -like the syscall). +If C<$offset> is undefined, then the current file descriptor offset will +be used (and updated), otherwise the file descriptor offset will not be +changed by these calls. -Example: Read 15 bytes at offset 7 into scalar C<$buffer>, strating at +If C<$length> is undefined in C, use the remaining length of +C<$data>. + +If C<$dataoffset> is less than zero, it will be counted from the end of +C<$data>. + +The C<$data> scalar I be modified in any way while the request +is outstanding. Modifying it can result in segfaults or World War III (if +the necessary/optional hardware is installed). + +Example: Read 15 bytes at offset 7 into scalar C<$buffer>, starting at offset C<0> within the scalar: aio_read $fh, 7, 15, $buffer, 0, sub { - $_[0] >= 0 or die "read error: $!"; - print "read <$buffer>\n"; + $_[0] > 0 or die "read error: $!"; + print "read $_[0] bytes: <$buffer>\n"; }; -=item aio_readahead $fh,$offset,$length, $callback -Asynchronously reads the specified byte range into the page cache, using -the C syscall. If that syscall doesn't exist the status will be -C<-1> and C<$!> is set to ENOSYS. +=item aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval) + +Tries to copy C<$length> bytes from C<$in_fh> to C<$out_fh>. It starts +reading at byte offset C<$in_offset>, and starts writing at the current +file offset of C<$out_fh>. Because of that, it is not safe to issue more +than one C per C<$out_fh>, as they will interfere with each +other. The same C<$in_fh> works fine though, as this function does not +move or use the file offset of C<$in_fh>. + +Please note that C can read more bytes from C<$in_fh> than +are written, and there is no way to find out how many more bytes have been +read from C alone, as C only provides the +number of bytes written to C<$out_fh>. Only if the result value equals +C<$length> one can assume that C<$length> bytes have been read. + +Unlike with other C functions, it makes a lot of sense to use +C on non-blocking sockets, as long as one end (typically +the C<$in_fh>) is a file - the file I/O will then be asynchronous, while +the socket I/O will be non-blocking. Note, however, that you can run +into a trap where C reads some data with readahead, then +fails to write all data, and when the socket is ready the next time, the +data in the cache is already lost, forcing C to again hit +the disk. Explicit C + C let's you better control +resource usage. + +This call tries to make use of a native C-like syscall to +provide zero-copy operation. For this to work, C<$out_fh> should refer to +a socket, and C<$in_fh> should refer to an mmap'able file. + +If a native sendfile cannot be found or it fails with C, +C, C, C, C, C or +C, it will be emulated, so you can call C on any +type of filehandle regardless of the limitations of the operating system. + +As native sendfile syscalls (as practically any non-POSIX interface hacked +together in a hurry to improve benchmark numbers) tend to be rather buggy +on many systems, this implementation tries to work around some known bugs +in Linux and FreeBSD kernels (probably others, too), but that might fail, +so you really really should check the return value of C - +fewre bytes than expected might have been transferred. -readahead() populates the page cache with data from a file so that + +=item aio_readahead $fh,$offset,$length, $callback->($retval) + +C populates the page cache with data from a file so that subsequent reads from that file will not block on disk I/O. The C<$offset> argument specifies the starting point from which data is to be read and C<$length> specifies the number of bytes to be read. I/O is performed in whole pages, so that offset is effectively rounded down to a page boundary and bytes are read up to the next page boundary greater than or equal to -(off-set+length). aio_readahead() does not read beyond the end of the +(off-set+length). C does not read beyond the end of the file. The current file offset of the file is left unchanged. -=item aio_stat $fh_or_path, $callback +If that syscall doesn't exist (likely if your OS isn't Linux) it will be +emulated by simply reading the data, which would have a similar effect. + + +=item aio_stat $fh_or_path, $callback->($status) -=item aio_lstat $fh, $callback +=item aio_lstat $fh, $callback->($status) Works like perl's C or C in void context. The callback will be called after the stat and the results will be available using C @@ -200,6 +504,15 @@ error when stat'ing a large file, the results will be silently truncated unless perl itself is compiled with large file support. +To help interpret the mode and dev/rdev stat values, IO::AIO offers the +following constants and functions (if not implemented, the constants will +be C<0> and the functions will either C or fall back on traditional +behaviour). + +C, C, C, C, C, C, +C, C, C, C, +C, C. + Example: Print the length of F: aio_stat "/etc/passwd", sub { @@ -207,52 +520,1316 @@ print "size is ", -s _, "\n"; }; -=item aio_unlink $pathname, $callback + +=item aio_statvfs $fh_or_path, $callback->($statvfs) + +Works like the POSIX C or C syscalls, depending on +whether a file handle or path was passed. + +On success, the callback is passed a hash reference with the following +members: C, C, C, C, C, C, +C, C, C, C and C. On failure, C +is passed. + +The following POSIX IO::AIO::ST_* constants are defined: C and +C. + +The following non-POSIX IO::AIO::ST_* flag masks are defined to +their correct value when available, or to C<0> on systems that do +not support them: C, C, C, +C, C, C, C, C, +C and C. + +Example: stat C and dump out the data if successful. + + aio_statvfs "/wd", sub { + my $f = $_[0] + or die "statvfs: $!"; + + use Data::Dumper; + say Dumper $f; + }; + + # result: + { + bsize => 1024, + bfree => 4333064312, + blocks => 10253828096, + files => 2050765568, + flag => 4096, + favail => 2042092649, + bavail => 4333064312, + ffree => 2042092649, + namemax => 255, + frsize => 1024, + fsid => 1810 + } + + +=item aio_utime $fh_or_path, $atime, $mtime, $callback->($status) + +Works like perl's C function (including the special case of $atime +and $mtime being undef). Fractional times are supported if the underlying +syscalls support them. + +When called with a pathname, uses utimes(2) if available, otherwise +utime(2). If called on a file descriptor, uses futimes(2) if available, +otherwise returns ENOSYS, so this is not portable. + +Examples: + + # set atime and mtime to current time (basically touch(1)): + aio_utime "path", undef, undef; + # set atime to current time and mtime to beginning of the epoch: + aio_utime "path", time, undef; # undef==0 + + +=item aio_chown $fh_or_path, $uid, $gid, $callback->($status) + +Works like perl's C function, except that C for either $uid +or $gid is being interpreted as "do not change" (but -1 can also be used). + +Examples: + + # same as "chown root path" in the shell: + aio_chown "path", 0, -1; + # same as above: + aio_chown "path", 0, undef; + + +=item aio_truncate $fh_or_path, $offset, $callback->($status) + +Works like truncate(2) or ftruncate(2). + + +=item aio_chmod $fh_or_path, $mode, $callback->($status) + +Works like perl's C function. + + +=item aio_unlink $pathname, $callback->($status) Asynchronously unlink (delete) a file and call the callback with the result code. -=item aio_fsync $fh, $callback + +=item aio_mknod $path, $mode, $dev, $callback->($status) + +[EXPERIMENTAL] + +Asynchronously create a device node (or fifo). See mknod(2). + +The only (POSIX-) portable way of calling this function is: + + aio_mknod $path, IO::AIO::S_IFIFO | $mode, 0, sub { ... + +See C for info about some potentially helpful extra constants +and functions. + +=item aio_link $srcpath, $dstpath, $callback->($status) + +Asynchronously create a new link to the existing object at C<$srcpath> at +the path C<$dstpath> and call the callback with the result code. + + +=item aio_symlink $srcpath, $dstpath, $callback->($status) + +Asynchronously create a new symbolic link to the existing object at C<$srcpath> at +the path C<$dstpath> and call the callback with the result code. + + +=item aio_readlink $path, $callback->($link) + +Asynchronously read the symlink specified by C<$path> and pass it to +the callback. If an error occurs, nothing or undef gets passed to the +callback. + + +=item aio_rename $srcpath, $dstpath, $callback->($status) + +Asynchronously rename the object at C<$srcpath> to C<$dstpath>, just as +rename(2) and call the callback with the result code. + + +=item aio_mkdir $pathname, $mode, $callback->($status) + +Asynchronously mkdir (create) a directory and call the callback with +the result code. C<$mode> will be modified by the umask at the time the +request is executed, so do not change your umask. + + +=item aio_rmdir $pathname, $callback->($status) + +Asynchronously rmdir (delete) a directory and call the callback with the +result code. + + +=item aio_readdir $pathname, $callback->($entries) + +Unlike the POSIX call of the same name, C reads an entire +directory (i.e. opendir + readdir + closedir). The entries will not be +sorted, and will B include the C<.> and C<..> entries. + +The callback is passed a single argument which is either C or an +array-ref with the filenames. + + +=item aio_readdirx $pathname, $flags, $callback->($entries, $flags) + +Quite similar to C, but the C<$flags> argument allows to tune +behaviour and output format. In case of an error, C<$entries> will be +C. + +The flags are a combination of the following constants, ORed together (the +flags will also be passed to the callback, possibly modified): + +=over 4 + +=item IO::AIO::READDIR_DENTS + +When this flag is off, then the callback gets an arrayref consisting of +names only (as with C), otherwise it gets an arrayref with +C<[$name, $type, $inode]> arrayrefs, each describing a single directory +entry in more detail. + +C<$name> is the name of the entry. + +C<$type> is one of the C constants: + +C, C, C, C, +C, C, C, C, +C. + +C means just that: readdir does not know. If you need to +know, you have to run stat yourself. Also, for speed reasons, the C<$type> +scalars are read-only: you can not modify them. + +C<$inode> is the inode number (which might not be exact on systems with 64 +bit inode numbers and 32 bit perls). This field has unspecified content on +systems that do not deliver the inode information. + +=item IO::AIO::READDIR_DIRS_FIRST + +When this flag is set, then the names will be returned in an order where +likely directories come first, in optimal stat order. This is useful when +you need to quickly find directories, or you want to find all directories +while avoiding to stat() each entry. + +If the system returns type information in readdir, then this is used +to find directories directly. Otherwise, likely directories are names +beginning with ".", or otherwise names with no dots, of which names with +short names are tried first. + +=item IO::AIO::READDIR_STAT_ORDER + +When this flag is set, then the names will be returned in an order +suitable for stat()'ing each one. That is, when you plan to stat() +all files in the given directory, then the returned order will likely +be fastest. + +If both this flag and C are specified, then +the likely dirs come first, resulting in a less optimal stat order. + +=item IO::AIO::READDIR_FOUND_UNKNOWN + +This flag should not be set when calling C. Instead, it +is being set by C, when any of the C<$type>'s found were +C. The absense of this flag therefore indicates that all +C<$type>'s are known, which can be used to speed up some algorithms. + +=back + + +=item aio_load $path, $data, $callback->($status) + +This is a composite request that tries to fully load the given file into +memory. Status is the same as with aio_read. + +=cut + +sub aio_load($$;$) { + my ($path, undef, $cb) = @_; + my $data = \$_[1]; + + my $pri = aioreq_pri; + my $grp = aio_group $cb; + + aioreq_pri $pri; + add $grp aio_open $path, O_RDONLY, 0, sub { + my $fh = shift + or return $grp->result (-1); + + aioreq_pri $pri; + add $grp aio_read $fh, 0, (-s $fh), $$data, 0, sub { + $grp->result ($_[0]); + }; + }; + + $grp +} + +=item aio_copy $srcpath, $dstpath, $callback->($status) + +Try to copy the I (directories not supported as either source or +destination) from C<$srcpath> to C<$dstpath> and call the callback with +a status of C<0> (ok) or C<-1> (error, see C<$!>). + +This is a composite request that creates the destination file with +mode 0200 and copies the contents of the source file into it using +C, followed by restoring atime, mtime, access mode and +uid/gid, in that order. + +If an error occurs, the partial destination file will be unlinked, if +possible, except when setting atime, mtime, access mode and uid/gid, where +errors are being ignored. + +=cut + +sub aio_copy($$;$) { + my ($src, $dst, $cb) = @_; + + my $pri = aioreq_pri; + my $grp = aio_group $cb; + + aioreq_pri $pri; + add $grp aio_open $src, O_RDONLY, 0, sub { + if (my $src_fh = $_[0]) { + my @stat = stat $src_fh; # hmm, might block over nfs? + + aioreq_pri $pri; + add $grp aio_open $dst, O_CREAT | O_WRONLY | O_TRUNC, 0200, sub { + if (my $dst_fh = $_[0]) { + aioreq_pri $pri; + add $grp aio_sendfile $dst_fh, $src_fh, 0, $stat[7], sub { + if ($_[0] == $stat[7]) { + $grp->result (0); + close $src_fh; + + my $ch = sub { + aioreq_pri $pri; + add $grp aio_chmod $dst_fh, $stat[2] & 07777, sub { + aioreq_pri $pri; + add $grp aio_chown $dst_fh, $stat[4], $stat[5], sub { + aioreq_pri $pri; + add $grp aio_close $dst_fh; + } + }; + }; + + aioreq_pri $pri; + add $grp aio_utime $dst_fh, $stat[8], $stat[9], sub { + if ($_[0] < 0 && $! == ENOSYS) { + aioreq_pri $pri; + add $grp aio_utime $dst, $stat[8], $stat[9], $ch; + } else { + $ch->(); + } + }; + } else { + $grp->result (-1); + close $src_fh; + close $dst_fh; + + aioreq $pri; + add $grp aio_unlink $dst; + } + }; + } else { + $grp->result (-1); + } + }, + + } else { + $grp->result (-1); + } + }; + + $grp +} + +=item aio_move $srcpath, $dstpath, $callback->($status) + +Try to move the I (directories not supported as either source or +destination) from C<$srcpath> to C<$dstpath> and call the callback with +a status of C<0> (ok) or C<-1> (error, see C<$!>). + +This is a composite request that tries to rename(2) the file first; if +rename fails with C, it copies the file with C and, if +that is successful, unlinks the C<$srcpath>. + +=cut + +sub aio_move($$;$) { + my ($src, $dst, $cb) = @_; + + my $pri = aioreq_pri; + my $grp = aio_group $cb; + + aioreq_pri $pri; + add $grp aio_rename $src, $dst, sub { + if ($_[0] && $! == EXDEV) { + aioreq_pri $pri; + add $grp aio_copy $src, $dst, sub { + $grp->result ($_[0]); + + unless ($_[0]) { + aioreq_pri $pri; + add $grp aio_unlink $src; + } + }; + } else { + $grp->result ($_[0]); + } + }; + + $grp +} + +=item aio_scandir $path, $maxreq, $callback->($dirs, $nondirs) + +Scans a directory (similar to C) but additionally tries to +efficiently separate the entries of directory C<$path> into two sets of +names, directories you can recurse into (directories), and ones you cannot +recurse into (everything else, including symlinks to directories). + +C is a composite request that creates of many sub requests_ +C<$maxreq> specifies the maximum number of outstanding aio requests that +this function generates. If it is C<< <= 0 >>, then a suitable default +will be chosen (currently 4). + +On error, the callback is called without arguments, otherwise it receives +two array-refs with path-relative entry names. + +Example: + + aio_scandir $dir, 0, sub { + my ($dirs, $nondirs) = @_; + print "real directories: @$dirs\n"; + print "everything else: @$nondirs\n"; + }; + +Implementation notes. + +The C cannot be avoided, but C'ing every entry can. + +If readdir returns file type information, then this is used directly to +find directories. + +Otherwise, after reading the directory, the modification time, size etc. +of the directory before and after the readdir is checked, and if they +match (and isn't the current time), the link count will be used to decide +how many entries are directories (if >= 2). Otherwise, no knowledge of the +number of subdirectories will be assumed. + +Then entries will be sorted into likely directories a non-initial dot +currently) and likely non-directories (see C). Then every +entry plus an appended C will be C'ed, likely directories first, +in order of their inode numbers. If that succeeds, it assumes that the +entry is a directory or a symlink to directory (which will be checked +seperately). This is often faster than stat'ing the entry itself because +filesystems might detect the type of the entry without reading the inode +data (e.g. ext2fs filetype feature), even on systems that cannot return +the filetype information on readdir. + +If the known number of directories (link count - 2) has been reached, the +rest of the entries is assumed to be non-directories. + +This only works with certainty on POSIX (= UNIX) filesystems, which +fortunately are the vast majority of filesystems around. + +It will also likely work on non-POSIX filesystems with reduced efficiency +as those tend to return 0 or 1 as link counts, which disables the +directory counting heuristic. + +=cut + +sub aio_scandir($$;$) { + my ($path, $maxreq, $cb) = @_; + + my $pri = aioreq_pri; + + my $grp = aio_group $cb; + + $maxreq = 4 if $maxreq <= 0; + + # stat once + aioreq_pri $pri; + add $grp aio_stat $path, sub { + return $grp->result () if $_[0]; + my $now = time; + my $hash1 = join ":", (stat _)[0,1,3,7,9]; + + # read the directory entries + aioreq_pri $pri; + add $grp aio_readdirx $path, READDIR_DIRS_FIRST, sub { + my $entries = shift + or return $grp->result (); + + # stat the dir another time + aioreq_pri $pri; + add $grp aio_stat $path, sub { + my $hash2 = join ":", (stat _)[0,1,3,7,9]; + + my $ndirs; + + # take the slow route if anything looks fishy + if ($hash1 ne $hash2 or (stat _)[9] == $now) { + $ndirs = -1; + } else { + # if nlink == 2, we are finished + # for non-posix-fs's, we rely on nlink < 2 + $ndirs = (stat _)[3] - 2 + or return $grp->result ([], $entries); + } + + my (@dirs, @nondirs); + + my $statgrp = add $grp aio_group sub { + $grp->result (\@dirs, \@nondirs); + }; + + limit $statgrp $maxreq; + feed $statgrp sub { + return unless @$entries; + my $entry = shift @$entries; + + aioreq_pri $pri; + add $statgrp aio_stat "$path/$entry/.", sub { + if ($_[0] < 0) { + push @nondirs, $entry; + } else { + # need to check for real directory + aioreq_pri $pri; + add $statgrp aio_lstat "$path/$entry", sub { + if (-d _) { + push @dirs, $entry; + + unless (--$ndirs) { + push @nondirs, @$entries; + feed $statgrp; + } + } else { + push @nondirs, $entry; + } + } + } + }; + }; + }; + }; + }; + + $grp +} + +=item aio_rmtree $path, $callback->($status) + +Delete a directory tree starting (and including) C<$path>, return the +status of the final C only. This is a composite request that +uses C to recurse into and rmdir directories, and unlink +everything else. + +=cut + +sub aio_rmtree; +sub aio_rmtree($;$) { + my ($path, $cb) = @_; + + my $pri = aioreq_pri; + my $grp = aio_group $cb; + + aioreq_pri $pri; + add $grp aio_scandir $path, 0, sub { + my ($dirs, $nondirs) = @_; + + my $dirgrp = aio_group sub { + add $grp aio_rmdir $path, sub { + $grp->result ($_[0]); + }; + }; + + (aioreq_pri $pri), add $dirgrp aio_rmtree "$path/$_" for @$dirs; + (aioreq_pri $pri), add $dirgrp aio_unlink "$path/$_" for @$nondirs; + + add $grp $dirgrp; + }; + + $grp +} + +=item aio_sync $callback->($status) + +Asynchronously call sync and call the callback when finished. + +=item aio_fsync $fh, $callback->($status) Asynchronously call fsync on the given filehandle and call the callback with the fsync result code. -=item aio_fdatasync $fh, $callback +=item aio_fdatasync $fh, $callback->($status) Asynchronously call fdatasync on the given filehandle and call the callback with the fdatasync result code. +If this call isn't available because your OS lacks it or it couldn't be +detected, it will be emulated by calling C instead. + +=item aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status) + +Sync the data portion of the file specified by C<$offset> and C<$length> +to disk (but NOT the metadata), by calling the Linux-specific +sync_file_range call. If sync_file_range is not available or it returns +ENOSYS, then fdatasync or fsync is being substituted. + +C<$flags> can be a combination of C, +C and +C: refer to the sync_file_range +manpage for details. + +=item aio_pathsync $path, $callback->($status) + +This request tries to open, fsync and close the given path. This is a +composite request intended to sync directories after directory operations +(E.g. rename). This might not work on all operating systems or have any +specific effect, but usually it makes sure that directory changes get +written to disc. It works for anything that can be opened for read-only, +not just directories. + +Future versions of this function might fall back to other methods when +C on the directory fails (such as calling C). + +Passes C<0> when everything went ok, and C<-1> on error. + =cut -# support function to convert a fd into a perl filehandle -sub _fd2fh { - return undef if $_[0] < 0; +sub aio_pathsync($;$) { + my ($path, $cb) = @_; + + my $pri = aioreq_pri; + my $grp = aio_group $cb; - # try to be perl5.6-compatible - local *AIO_FH; - open AIO_FH, "+<&=$_[0]" - or return undef; + aioreq_pri $pri; + add $grp aio_open $path, O_RDONLY, 0, sub { + my ($fh) = @_; + if ($fh) { + aioreq_pri $pri; + add $grp aio_fsync $fh, sub { + $grp->result ($_[0]); + + aioreq_pri $pri; + add $grp aio_close $fh; + }; + } else { + $grp->result (-1); + } + }; - *AIO_FH + $grp } -min_parallel 4; +=item aio_msync $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status) -END { - max_parallel 0; -} +This is a rather advanced IO::AIO call, which only works on mmap(2)ed +scalars (see the C function, although it also works on data +scalars managed by the L or L modules, note that the +scalar must only be modified in-place while an aio operation is pending on +it). -1; +It calls the C function of your OS, if available, with the memory +area starting at C<$offset> in the string and ending C<$length> bytes +later. If C<$length> is negative, counts from the end, and if C<$length> +is C, then it goes till the end of the string. The flags can be +a combination of C, C and +C. + +=item aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status) + +This is a rather advanced IO::AIO call, which works best on mmap(2)ed +scalars. + +It touches (reads or writes) all memory pages in the specified +range inside the scalar. All caveats and parameters are the same +as for C, above, except for flags, which must be either +C<0> (which reads all pages and ensures they are instantiated) or +C, which modifies the memory page s(by reading and +writing an octet from it, which dirties the page). + +=item aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status) + +This is a rather advanced IO::AIO call, which works best on mmap(2)ed +scalars. + +It reads in all the pages of the underlying storage into memory (if any) +and locks them, so they are not getting swapped/paged out or removed. + +If C<$length> is undefined, then the scalar will be locked till the end. + +On systems that do not implement C, this function returns C<-1> +and sets errno to C. + +Note that the corresponding C is synchronous and is +documented under L. + +Example: open a file, mmap and mlock it - both will be undone when +C<$data> gets destroyed. + + open my $fh, "<", $path or die "$path: $!"; + my $data; + IO::AIO::mmap $data, -s $fh, IO::AIO::PROT_READ, IO::AIO::MAP_SHARED, $fh; + aio_mlock $data; # mlock in background + +=item aio_mlockall $flags, $callback->($status) + +Calls the C function with the given C<$flags> (a combination of +C and C). + +On systems that do not implement C, this function returns C<-1> +and sets errno to C. + +Note that the corresponding C is synchronous and is +documented under L. + +Example: asynchronously lock all current and future pages into memory. + + aio_mlockall IO::AIO::MCL_FUTURE; + +=item aio_group $callback->(...) + +This is a very special aio request: Instead of doing something, it is a +container for other aio requests, which is useful if you want to bundle +many requests into a single, composite, request with a definite callback +and the ability to cancel the whole request with its subrequests. + +Returns an object of class L. See its documentation below +for more info. + +Example: + + my $grp = aio_group sub { + print "all stats done\n"; + }; + + add $grp + (aio_stat ...), + (aio_stat ...), + ...; + +=item aio_nop $callback->() + +This is a special request - it does nothing in itself and is only used for +side effects, such as when you want to add a dummy request to a group so +that finishing the requests in the group depends on executing the given +code. + +While this request does nothing, it still goes through the execution +phase and still requires a worker thread. Thus, the callback will not +be executed immediately but only after other requests in the queue have +entered their execution phase. This can be used to measure request +latency. + +=item IO::AIO::aio_busy $fractional_seconds, $callback->() *NOT EXPORTED* + +Mainly used for debugging and benchmarking, this aio request puts one of +the request workers to sleep for the given time. + +While it is theoretically handy to have simple I/O scheduling requests +like sleep and file handle readable/writable, the overhead this creates is +immense (it blocks a thread for a long time) so do not use this function +except to put your application under artificial I/O pressure. + +=back + +=head2 IO::AIO::REQ CLASS + +All non-aggregate C functions return an object of this class when +called in non-void context. + +=over 4 + +=item cancel $req + +Cancels the request, if possible. Has the effect of skipping execution +when entering the B state and skipping calling the callback when +entering the the B state, but will leave the request otherwise +untouched (with the exception of readdir). That means that requests that +currently execute will not be stopped and resources held by the request +will not be freed prematurely. + +=item cb $req $callback->(...) + +Replace (or simply set) the callback registered to the request. + +=back + +=head2 IO::AIO::GRP CLASS + +This class is a subclass of L, so all its methods apply to +objects of this class, too. + +A IO::AIO::GRP object is a special request that can contain multiple other +aio requests. + +You create one by calling the C constructing function with a +callback that will be called when all contained requests have entered the +C state: + + my $grp = aio_group sub { + print "all requests are done\n"; + }; + +You add requests by calling the C method with one or more +C objects: + + $grp->add (aio_unlink "..."); + + add $grp aio_stat "...", sub { + $_[0] or return $grp->result ("error"); + + # add another request dynamically, if first succeeded + add $grp aio_open "...", sub { + $grp->result ("ok"); + }; + }; + +This makes it very easy to create composite requests (see the source of +C for an application) that work and feel like simple requests. + +=over 4 + +=item * The IO::AIO::GRP objects will be cleaned up during calls to +C, just like any other request. + +=item * They can be canceled like any other request. Canceling will cancel not +only the request itself, but also all requests it contains. + +=item * They can also can also be added to other IO::AIO::GRP objects. + +=item * You must not add requests to a group from within the group callback (or +any later time). + +=back + +Their lifetime, simplified, looks like this: when they are empty, they +will finish very quickly. If they contain only requests that are in the +C state, they will also finish. Otherwise they will continue to +exist. + +That means after creating a group you have some time to add requests +(precisely before the callback has been invoked, which is only done within +the C). And in the callbacks of those requests, you can add +further requests to the group. And only when all those requests have +finished will the the group itself finish. + +=over 4 + +=item add $grp ... + +=item $grp->add (...) + +Add one or more requests to the group. Any type of L can +be added, including other groups, as long as you do not create circular +dependencies. + +Returns all its arguments. + +=item $grp->cancel_subs + +Cancel all subrequests and clears any feeder, but not the group request +itself. Useful when you queued a lot of events but got a result early. + +The group request will finish normally (you cannot add requests to the +group). + +=item $grp->result (...) + +Set the result value(s) that will be passed to the group callback when all +subrequests have finished and set the groups errno to the current value +of errno (just like calling C without an error number). By default, +no argument will be passed and errno is zero. + +=item $grp->errno ([$errno]) + +Sets the group errno value to C<$errno>, or the current value of errno +when the argument is missing. + +Every aio request has an associated errno value that is restored when +the callback is invoked. This method lets you change this value from its +default (0). + +Calling C will also set errno, so make sure you either set C<$!> +before the call to C, or call c after it. + +=item feed $grp $callback->($grp) + +Sets a feeder/generator on this group: every group can have an attached +generator that generates requests if idle. The idea behind this is that, +although you could just queue as many requests as you want in a group, +this might starve other requests for a potentially long time. For example, +C might generate hundreds of thousands C requests, +delaying any later requests for a long time. + +To avoid this, and allow incremental generation of requests, you can +instead a group and set a feeder on it that generates those requests. The +feed callback will be called whenever there are few enough (see C, +below) requests active in the group itself and is expected to queue more +requests. + +The feed callback can queue as many requests as it likes (i.e. C does +not impose any limits). + +If the feed does not queue more requests when called, it will be +automatically removed from the group. + +If the feed limit is C<0> when this method is called, it will be set to +C<2> automatically. + +Example: + + # stat all files in @files, but only ever use four aio requests concurrently: + + my $grp = aio_group sub { print "finished\n" }; + limit $grp 4; + feed $grp sub { + my $file = pop @files + or return; + + add $grp aio_stat $file, sub { ... }; + }; + +=item limit $grp $num + +Sets the feeder limit for the group: The feeder will be called whenever +the group contains less than this many requests. + +Setting the limit to C<0> will pause the feeding process. + +The default value for the limit is C<0>, but note that setting a feeder +automatically bumps it up to C<2>. + +=back + +=head2 SUPPORT FUNCTIONS + +=head3 EVENT PROCESSING AND EVENT LOOP INTEGRATION + +=over 4 + +=item $fileno = IO::AIO::poll_fileno + +Return the I. This filehandle must be +polled for reading by some mechanism outside this module (e.g. EV, Glib, +select and so on, see below or the SYNOPSIS). If the pipe becomes readable +you have to call C to check the results. + +See C for an example. + +=item IO::AIO::poll_cb + +Process some outstanding events on the result pipe. You have to call +this regularly. Returns C<0> if all events could be processed (or there +were no events to process), or C<-1> if it returned earlier for whatever +reason. Returns immediately when no events are outstanding. The amount of +events processed depends on the settings of C and +C. + +If not all requests were processed for whatever reason, the filehandle +will still be ready when C returns, so normally you don't have to +do anything special to have it called later. + +Apart from calling C when the event filehandle becomes +ready, it can be beneficial to call this function from loops which submit +a lot of requests, to make sure the results get processed when they become +available and not just when the loop is finished and the event loop takes +over again. This function returns very fast when there are no outstanding +requests. + +Example: Install an Event watcher that automatically calls +IO::AIO::poll_cb with high priority (more examples can be found in the +SYNOPSIS section, at the top of this document): + + Event->io (fd => IO::AIO::poll_fileno, + poll => 'r', async => 1, + cb => \&IO::AIO::poll_cb); + +=item IO::AIO::poll_wait + +If there are any outstanding requests and none of them in the result +phase, wait till the result filehandle becomes ready for reading (simply +does a C