[ViewVC] Diff of: cvs/IO-AIO/AIO.pm

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.208 by root, Mon Sep 26 20:19:08 2011 UTC vs.
Revision 1.225 by root, Tue Apr 10 05:01:33 2012 UTC

 use common::sense;
 use base 'Exporter';
 BEGIN {
-   our $VERSION = '4.0';
+   our $VERSION = '4.15';
-   our @AIO_REQ = qw(aio_sendfile aio_read aio_write aio_open aio_close
+   our @AIO_REQ = qw(aio_sendfile aio_seek aio_read aio_write aio_open aio_close
                      aio_stat aio_lstat aio_unlink aio_rmdir aio_readdir aio_readdirx
                      aio_scandir aio_symlink aio_readlink aio_realpath aio_sync
                      aio_fsync aio_syncfs aio_fdatasync aio_sync_file_range aio_fallocate
-                     aio_pathsync aio_readahead
+                     aio_pathsync aio_readahead aio_fiemap
                      aio_rename aio_link aio_move aio_copy aio_group
                      aio_nop aio_mknod aio_load aio_rmtree aio_mkdir aio_chown
                      aio_chmod aio_utime aio_truncate
                      aio_msync aio_mtouch aio_mlock aio_mlockall
                      aio_statvfs
 documentation.
    aio_wd $pathname, $callback->($wd)
    aio_open $pathname, $flags, $mode, $callback->($fh)
    aio_close $fh, $callback->($status)
+   aio_seek  $fh,$offset,$whence, $callback->($offs)
    aio_read  $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
    aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
    aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval)
    aio_readahead $fh,$offset,$length, $callback->($retval)
    aio_stat  $fh_or_path, $callback->($status)
    aio_lstat $fh, $callback->($status)
    aio_statvfs $fh_or_path, $callback->($statvfs)
    aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
    aio_chown $fh_or_path, $uid, $gid, $callback->($status)
+   aio_chmod $fh_or_path, $mode, $callback->($status)
    aio_truncate $fh_or_path, $offset, $callback->($status)
-   aio_chmod $fh_or_path, $mode, $callback->($status)
    aio_unlink $pathname, $callback->($status)
-   aio_mknod $path, $mode, $dev, $callback->($status)
+   aio_mknod $pathname, $mode, $dev, $callback->($status)
    aio_link $srcpath, $dstpath, $callback->($status)
    aio_symlink $srcpath, $dstpath, $callback->($status)
-   aio_readlink $path, $callback->($link)
+   aio_readlink $pathname, $callback->($link)
-   aio_realpath $path, $callback->($link)
+   aio_realpath $pathname, $callback->($link)
    aio_rename $srcpath, $dstpath, $callback->($status)
    aio_mkdir $pathname, $mode, $callback->($status)
    aio_rmdir $pathname, $callback->($status)
    aio_readdir $pathname, $callback->($entries)
    aio_readdirx $pathname, $flags, $callback->($entries, $flags)
       IO::AIO::READDIR_DENTS IO::AIO::READDIR_DIRS_FIRST
       IO::AIO::READDIR_STAT_ORDER IO::AIO::READDIR_FOUND_UNKNOWN
+   aio_scandir $pathname, $maxreq, $callback->($dirs, $nondirs)
-   aio_load $path, $data, $callback->($status)
+   aio_load $pathname, $data, $callback->($status)
    aio_copy $srcpath, $dstpath, $callback->($status)
    aio_move $srcpath, $dstpath, $callback->($status)
-   aio_scandir $path, $maxreq, $callback->($dirs, $nondirs)
-   aio_rmtree $path, $callback->($status)
+   aio_rmtree $pathname, $callback->($status)
    aio_sync $callback->($status)
    aio_syncfs $fh, $callback->($status)
    aio_fsync $fh, $callback->($status)
    aio_fdatasync $fh, $callback->($status)
    aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)
-   aio_pathsync $path, $callback->($status)
+   aio_pathsync $pathname, $callback->($status)
    aio_msync $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
    aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
    aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
    aio_mlockall $flags, $callback->($status)
    aio_group $callback->(...)
    IO::AIO::madvise $scalar, $offset, $length, $advice
    IO::AIO::mprotect $scalar, $offset, $length, $protect
    IO::AIO::munlock $scalar, $offset = 0, $length = undef
    IO::AIO::munlockall
-=head2 AIO REQUEST FUNCTIONS
+=head2 API NOTES
 All the C<aio_*> calls are more or less thin wrappers around the syscall
 with the same name (sans C<aio_>). The arguments are similar or identical,
 and they all accept an additional (and optional) C<$callback> argument
-which must be a code reference. This code reference will get called with
+which must be a code reference. This code reference will be called after
-the syscall return code (e.g. most syscalls return C<-1> on error, unlike
+the syscall has been executed in an asynchronous fashion. The results
-perl, which usually delivers "false") as its sole argument after the given
+of the request will be passed as arguments to the callback (and, if an
-syscall has been executed asynchronously.
+error occured, in C<$!>) - for most requests the syscall return code (e.g.
+most syscalls return C<-1> on error, unlike perl, which usually delivers
+"false").
+Some requests (such as C<aio_readdir>) pass the actual results and
+communicate failures by passing C<undef>.
 All functions expecting a filehandle keep a copy of the filehandle
 internally until the request has finished.
 All functions return request objects of type L<IO::AIO::REQ> that allow
 further manipulation of those requests while they are in-flight.
-The pathnames you pass to these routines I<must> be absolute and
+The pathnames you pass to these routines I<should> be absolute. The
-encoded as octets. The reason for the former is that at the time the
+reason for this is that at the time the request is being executed, the
-request is being executed, the current working directory could have
+current working directory could have changed. Alternatively, you can
-changed. Alternatively, you can make sure that you never change the
+make sure that you never change the current working directory anywhere
-current working directory anywhere in the program and then use relative
+in the program and then use relative paths. You can also take advantage
-paths.
+of IO::AIOs working directory abstraction, that lets you specify paths
+relative to some previously-opened "working directory object" - see the
+description of the C<IO::AIO::WD> class later in this document.
 To encode pathnames as octets, either make sure you either: a) always pass
 in filenames you got from outside (command line, readdir etc.) without
-tinkering, b) are ASCII or ISO 8859-1, c) use the Encode module and encode
+tinkering, b) are in your native filesystem encoding, c) use the Encode
-your pathnames to the locale (or other) encoding in effect in the user
+module and encode your pathnames to the locale (or other) encoding in
-environment, d) use Glib::filename_from_unicode on unicode filenames or e)
+effect in the user environment, d) use Glib::filename_from_unicode on
-use something else to ensure your scalar has the correct contents.
+unicode filenames or e) use something else to ensure your scalar has the
+correct contents.
 This works, btw. independent of the internal UTF-8 bit, which IO::AIO
 handles correctly whether it is set or not.
+=head2 AIO REQUEST FUNCTIONS
 =over 4
 =item $prev_pri = aioreq_pri [$pri]
 Or in other words: the file descriptor will be closed, but it will not be
 free for reuse until the perl filehandle is closed.
 =cut
+=item aio_seek $fh, $offset, $whence, $callback->($offs)
+Seeks the filehandle to the new C<$offset>, similarly to perl's
+C<sysseek>. The C<$whence> can use the traditional values (C<0> for
+C<IO::AIO::SEEK_SET>, C<1> for C<IO::AIO::SEEK_CUR> or C<2> for
+C<IO::AIO::SEEK_END>).
+The resulting absolute offset will be passed to the callback, or C<-1> in
+case of an error.
+In theory, the C<$whence> constants could be different than the
+corresponding values from L<Fcntl>, but perl guarantees they are the same,
+so don't panic.
+As a GNU/Linux (and maybe Solaris) extension, also the constants
+C<IO::AIO::SEEK_DATA> and C<IO::AIO::SEEK_HOLE> are available, if they
+could be found. No guarantees about suitability for use in C<aio_seek> or
+Perl's C<sysseek> can be made though, although I would naively assume they
+"just work".
 =item aio_read  $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
 =item aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
 Asynchronously unlink (delete) a file and call the callback with the
 result code.
-=item aio_mknod $path, $mode, $dev, $callback->($status)
+=item aio_mknod $pathname, $mode, $dev, $callback->($status)
 [EXPERIMENTAL]
 Asynchronously create a device node (or fifo). See mknod(2).
 The only (POSIX-) portable way of calling this function is:
-   aio_mknod $path, IO::AIO::S_IFIFO | $mode, 0, sub { ...
+   aio_mknod $pathname, IO::AIO::S_IFIFO | $mode, 0, sub { ...
 See C<aio_stat> for info about some potentially helpful extra constants
 and functions.
 =item aio_link $srcpath, $dstpath, $callback->($status)
 Asynchronously create a new symbolic link to the existing object at C<$srcpath> at
 the path C<$dstpath> and call the callback with the result code.
-=item aio_readlink $path, $callback->($link)
+=item aio_readlink $pathname, $callback->($link)
 Asynchronously read the symlink specified by C<$path> and pass it to
 the callback. If an error occurs, nothing or undef gets passed to the
 callback.
-=item aio_realpath $path, $callback->($path)
+=item aio_realpath $pathname, $callback->($path)
 Asynchronously make the path absolute and resolve any symlinks in
 C<$path>. The resulting path only consists of directories (Same as
 L<Cwd::realpath>).
 C<$type>'s are known, which can be used to speed up some algorithms.
 =back
-=item aio_load $path, $data, $callback->($status)
+=item aio_load $pathname, $data, $callback->($status)
 This is a composite request that tries to fully load the given file into
 memory. Status is the same as with aio_read.
 =cut
    };
    $grp
 }
-=item aio_scandir $path, $maxreq, $callback->($dirs, $nondirs)
+=item aio_scandir $pathname, $maxreq, $callback->($dirs, $nondirs)
 Scans a directory (similar to C<aio_readdir>) but additionally tries to
 efficiently separate the entries of directory C<$path> into two sets of
 names, directories you can recurse into (directories), and ones you cannot
 recurse into (everything else, including symlinks to directories).
    my $grp = aio_group $cb;
    $maxreq = 4 if $maxreq <= 0;
-   # stat once
+   # get a wd object
    aioreq_pri $pri;
-   add $grp aio_stat $path, sub {
+   add $grp aio_wd $path, sub {
+      $_[0]
-      return $grp->result () if $_[0];
+         or return $grp->result ();
-      my $now = time;
-      my $hash1 = join ":", (stat _)[0,1,3,7,9];
-      # read the directory entries
+      my $wd = [shift, "."];
+      # stat once
       aioreq_pri $pri;
-      add $grp aio_readdirx $path, READDIR_DIRS_FIRST, sub {
+      add $grp aio_stat $wd, sub {
-         my $entries = shift
-            or return $grp->result ();
+         return $grp->result () if $_[0];
+         my $now = time;
+         my $hash1 = join ":", (stat _)[0,1,3,7,9];
-         # stat the dir another time
+         # read the directory entries
          aioreq_pri $pri;
+         add $grp aio_readdirx $wd, READDIR_DIRS_FIRST, sub {
+            my $entries = shift
+               or return $grp->result ();
+            # stat the dir another time
+            aioreq_pri $pri;
-         add $grp aio_stat $path, sub {
+            add $grp aio_stat $wd, sub {
-            my $hash2 = join ":", (stat _)[0,1,3,7,9];
+               my $hash2 = join ":", (stat _)[0,1,3,7,9];
-            my $ndirs;
+               my $ndirs;
-            # take the slow route if anything looks fishy
+               # take the slow route if anything looks fishy
-            if ($hash1 ne $hash2 or (stat _)[9] == $now) {
+               if ($hash1 ne $hash2 or (stat _)[9] == $now) {
-               $ndirs = -1;
+                  $ndirs = -1;
-            } else {
+               } else {
-               # if nlink == 2, we are finished
+                  # if nlink == 2, we are finished
-               # for non-posix-fs's, we rely on nlink < 2
+                  # for non-posix-fs's, we rely on nlink < 2
-               $ndirs = (stat _)[3] - 2
+                  $ndirs = (stat _)[3] - 2
-                  or return $grp->result ([], $entries);
+                     or return $grp->result ([], $entries);
-            }
+               }
-            my (@dirs, @nondirs);
+               my (@dirs, @nondirs);
-            my $statgrp = add $grp aio_group sub {
+               my $statgrp = add $grp aio_group sub {
-               $grp->result (\@dirs, \@nondirs);
+                  $grp->result (\@dirs, \@nondirs);
-            };
+               };
-            limit $statgrp $maxreq;
+               limit $statgrp $maxreq;
-            feed $statgrp sub {
+               feed $statgrp sub {
-               return unless @$entries;
+                  return unless @$entries;
-               my $entry = shift @$entries;
+                  my $entry = shift @$entries;
-               aioreq_pri $pri;
+                  aioreq_pri $pri;
+                  $wd->[1] = "$entry/.";
-               add $statgrp aio_stat "$path/$entry/.", sub {
+                  add $statgrp aio_stat $wd, sub {
-                  if ($_[0] < 0) {
+                     if ($_[0] < 0) {
-                     push @nondirs, $entry;
+                        push @nondirs, $entry;
-                  } else {
+                     } else {
-                     # need to check for real directory
+                        # need to check for real directory
-                     aioreq_pri $pri;
+                        aioreq_pri $pri;
+                        $wd->[1] = $entry;
-                     add $statgrp aio_lstat "$path/$entry", sub {
+                        add $statgrp aio_lstat $wd, sub {
-                        if (-d _) {
+                           if (-d _) {
-                           push @dirs, $entry;
+                              push @dirs, $entry;
-                           unless (--$ndirs) {
+                              unless (--$ndirs) {
-                              push @nondirs, @$entries;
+                                 push @nondirs, @$entries;
-                              feed $statgrp;
+                                 feed $statgrp;
+                              }
+                           } else {
+                              push @nondirs, $entry;
                            }
-                        } else {
-                           push @nondirs, $entry;
                         }
                      }
-                  }
+                  };
                };
             };
          };
       };
    };
    $grp
 }
-=item aio_rmtree $path, $callback->($status)
+=item aio_rmtree $pathname, $callback->($status)
 Delete a directory tree starting (and including) C<$path>, return the
 status of the final C<rmdir> only.  This is a composite request that
 uses C<aio_scandir> to recurse into and rmdir directories, and unlink
 everything else.
 C<$flags> can be a combination of C<IO::AIO::SYNC_FILE_RANGE_WAIT_BEFORE>,
 C<IO::AIO::SYNC_FILE_RANGE_WRITE> and
 C<IO::AIO::SYNC_FILE_RANGE_WAIT_AFTER>: refer to the sync_file_range
 manpage for details.
-=item aio_pathsync $path, $callback->($status)
+=item aio_pathsync $pathname, $callback->($status)
 This request tries to open, fsync and close the given path. This is a
 composite request intended to sync directories after directory operations
 (E.g. rename). This might not work on all operating systems or have any
 specific effect, but usually it makes sure that directory changes get
 Example: asynchronously lock all current and future pages into memory.
    aio_mlockall IO::AIO::MCL_FUTURE;
+=item aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)
+Queries the extents of the given file (by calling the Linux FIEMAP ioctl,
+see L<http://cvs.schmorp.de/IO-AIO/doc/fiemap.txt> for details). If the
+C<ioctl> is not available on your OS, then this rquiest will fail with
+C<ENOSYS>.
+C<$start> is the starting offset to query extents for, C<$length> is the
+size of the range to query - if it is C<undef>, then the whole file will
+be queried.
+C<$flags> is a combination of flags (C<IO::AIO::FIEMAP_FLAG_SYNC> or
+C<IO::AIO::FIEMAP_FLAG_XATTR> - C<IO::AIO::FIEMAP_FLAGS_COMPAT> is also
+exported), and is normally C<0> or C<IO::AIO::FIEMAP_FLAG_SYNC> to query
+the data portion.
+C<$count> is the maximum number of extent records to return. If it is
+C<undef>, then IO::AIO queries all extents of the file. As a very special
+case, if it is C<0>, then the callback receives the number of extents
+instead of the extents themselves.
+If an error occurs, the callback receives no arguments. The special
+C<errno> value C<IO::AIO::EBADR> is available to test for flag errors.
+Otherwise, the callback receives an array reference with extent
+structures. Each extent structure is an array reference itself, with the
+following members:
+   [$logical, $physical, $length, $flags]
+Flags is any combination of the following flag values (typically either C<0>
+or C<IO::AIO::FIEMAP_EXTENT_LAST>):
+C<IO::AIO::FIEMAP_EXTENT_LAST>, C<IO::AIO::FIEMAP_EXTENT_UNKNOWN>,
+C<IO::AIO::FIEMAP_EXTENT_DELALLOC>, C<IO::AIO::FIEMAP_EXTENT_ENCODED>,
+C<IO::AIO::FIEMAP_EXTENT_DATA_ENCRYPTED>, C<IO::AIO::FIEMAP_EXTENT_NOT_ALIGNED>,
+C<IO::AIO::FIEMAP_EXTENT_DATA_INLINE>, C<IO::AIO::FIEMAP_EXTENT_DATA_TAIL>,
+C<IO::AIO::FIEMAP_EXTENT_UNWRITTEN>, C<IO::AIO::FIEMAP_EXTENT_MERGED> or
+C<IO::AIO::FIEMAP_EXTENT_SHARED>.
 =item aio_group $callback->(...)
 This is a very special aio request: Instead of doing something, it is a
 container for other aio requests, which is useful if you want to bundle
 many requests into a single, composite, request with a definite callback
 like sleep and file handle readable/writable, the overhead this creates is
 immense (it blocks a thread for a long time) so do not use this function
 except to put your application under artificial I/O pressure.
 =back
+=head2 IO::AIO::WD - multiple working directories
+Your process only has one current working directory, which is used by all
+threads. This makes it hard to use relative paths (some other component
+could call C<chdir> at any time, and it is hard to control when the path
+will be used by IO::AIO).
+One solution for this is to always use absolute paths. This usually works,
+but can be quite slow (the kernel has to walk the whole path on every
+access), and can also be a hassle to implement.
+Newer POSIX systems have a number of functions (openat, fdopendir,
+futimensat and so on) that make it possible to specify working directories
+per operation.
+For portability, and because the clowns who "designed", or shall I write,
+perpetrated this new interface were obviously half-drunk, this abstraction
+cannot be perfect, though.
+IO::AIO allows you to convert directory paths into a so-called IO::AIO::WD
+object. This object stores the canonicalised, absolute version of the
+path, and on systems that allow it, also a directory file descriptor.
+Everywhere where a pathname is accepted by IO::AIO (e.g. in C<aio_stat>
+or C<aio_unlink>), one can specify an array reference with an IO::AIO::WD
+object and a pathname instead (or the IO::AIO::WD object alone, which
+gets interpreted as C<[$wd, "."]>). If the pathname is absolute, the
+IO::AIO::WD object is ignored, otherwise the pathname is resolved relative
+to that IO::AIO::WD object.
+For example, to get a wd object for F</etc> and then stat F<passwd>
+inside, you would write:
+   aio_wd "/etc", sub {
+      my $etcdir = shift;
+      # although $etcdir can be undef on error, there is generally no reason
+      # to check for errors here, as aio_stat will fail with ENOENT
+      # when $etcdir is undef.
+      aio_stat [$etcdir, "passwd"], sub {
+         # yay
+      };
+   };
+That C<aio_wd> is a request and not a normal function shows that creating
+an IO::AIO::WD object is itself a potentially blocking operation, which is
+why it is done asynchronously.
+To stat the directory obtained with C<aio_wd> above, one could write
+either of the following three request calls:
+   aio_lstat "/etc"    , sub { ...  # pathname as normal string
+   aio_lstat [$wd, "."], sub { ...  # "." relative to $wd (i.e. $wd itself)
+   aio_lstat $wd       , sub { ...  # shorthand for the previous
+As with normal pathnames, IO::AIO keeps a copy of the working directory
+object and the pathname string, so you could write the following without
+causing any issues due to C<$path> getting reused:
+   my $path = [$wd, undef];
+   for my $name (qw(abc def ghi)) {
+      $path->[1] = $name;
+      aio_stat $path, sub {
+         # ...
+      };
+   }
+There are some caveats: when directories get renamed (or deleted), the
+pathname string doesn't change, so will point to the new directory (or
+nowhere at all), while the directory fd, if available on the system,
+will still point to the original directory. Most functions accepting a
+pathname will use the directory fd on newer systems, and the string on
+older systems. Some functions (such as realpath) will always rely on the
+string form of the pathname.
+So this fucntionality is mainly useful to get some protection against
+C<chdir>, to easily get an absolute path out of a relative path for future
+reference, and to speed up doing many operations in the same directory
+(e.g. when stat'ing all files in a directory).
+The following functions implement this working directory abstraction:
+=over 4
+=item aio_wd $pathname, $callback->($wd)
+Asynchonously canonicalise the given pathname and convert it to an
+IO::AIO::WD object representing it. If possible and supported on the
+system, also open a directory fd to speed up pathname resolution relative
+to this working directory.
+If something goes wrong, then C<undef> is passwd to the callback instead
+of a working directory object and C<$!> is set appropriately. Since
+passing C<undef> as working directory component of a pathname fails the
+request with C<ENOENT>, there is often no need for error checking in the
+C<aio_wd> callback, as future requests using the value will fail in the
+expected way.
+If this call isn't available because your OS lacks it or it couldn't be
+detected, it will be emulated by calling C<fsync> instead.
+=item IO::AIO::CWD
+This is a compiletime constant (object) that represents the process
+current working directory.
+Specifying this object as working directory object for a pathname is as
+if the pathname would be specified directly, without a directory object,
+e.g., these calls are functionally identical:
+   aio_stat "somefile", sub { ... };
+   aio_stat [IO::AIO::CWD, "somefile"], sub { ... };
+=back
 =head2 IO::AIO::REQ CLASS
 All non-aggregate C<aio_*> functions return an object of this class when
 called in non-void context.
 Sets a feeder/generator on this group: every group can have an attached
 generator that generates requests if idle. The idea behind this is that,
 although you could just queue as many requests as you want in a group,
 this might starve other requests for a potentially long time. For example,
-C<aio_scandir> might generate hundreds of thousands C<aio_stat> requests,
+C<aio_scandir> might generate hundreds of thousands of C<aio_stat>
-delaying any later requests for a long time.
+requests, delaying any later requests for a long time.
 To avoid this, and allow incremental generation of requests, you can
 instead a group and set a feeder on it that generates those requests. The
 feed callback will be called whenever there are few enough (see C<limit>,
 below) requests active in the group itself and is expected to queue more
 Calls the C<munlockall> function.
 On systems that do not implement C<munlockall>, this function returns
 ENOSYS, otherwise the return value of C<munlockall>.
+=item IO::AIO::splice $r_fh, $r_off, $w_fh, $w_off, $length, $flags
+Calls the GNU/Linux C<splice(2)> syscall, if available. If C<$r_off> or
+C<$w_off> are C<undef>, then C<NULL> is passed for these, otherwise they
+should be the file offset.
+The following symbol flag values are available: C<IO::AIO::SPLICE_F_MOVE>,
+C<IO::AIO::SPLICE_F_NONBLOCK>, C<IO::AIO::SPLICE_F_MORE> and
+C<IO::AIO::SPLICE_F_GIFT>.
+See the C<splice(2)> manpage for details.
+=item IO::AIO::tee $r_fh, $w_fh, $length, $flags
+Calls the GNU/Linux C<tee(2)> syscall, see it's manpage and the
+description for C<IO::AIO::splice> above for details.
 =back
 =cut
 min_parallel 8;

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing IO-AIO/AIO.pm (file contents): Revision 1.208 by root, Mon Sep 26 20:19:08 2011 UTC vs. Revision 1.225 by root, Tue Apr 10 05:01:33 2012 UTC

Diff Legend

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.208 by root, Mon Sep 26 20:19:08 2011 UTC vs.
Revision 1.225 by root, Tue Apr 10 05:01:33 2012 UTC