[ViewVC] Diff of: cvs/IO-AIO/AIO.pm

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.225 by root, Tue Apr 10 05:01:33 2012 UTC vs.
Revision 1.249 by root, Wed Jul 30 22:00:04 2014 UTC

…		…
68	=head2 EXAMPLE	68	=head2 EXAMPLE
69		69
70	This is a simple example that uses the EV module and loads	70	This is a simple example that uses the EV module and loads
71	F</etc/passwd> asynchronously:	71	F</etc/passwd> asynchronously:
72		72
73	use Fcntl;
74	use EV;	73	use EV;
75	use IO::AIO;	74	use IO::AIO;
76		75
77	# register the IO::AIO callback with EV	76	# register the IO::AIO callback with EV
78	my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;	77	my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
…		…
168	use common::sense;	167	use common::sense;
169		168
170	use base 'Exporter';	169	use base 'Exporter';
171		170
172	BEGIN {	171	BEGIN {
173	our $VERSION = '4.15';	172	our $VERSION = 4.31;
174		173
175	our @AIO_REQ = qw(aio_sendfile aio_seek aio_read aio_write aio_open aio_close	174	our @AIO_REQ = qw(aio_sendfile aio_seek aio_read aio_write aio_open aio_close
176	aio_stat aio_lstat aio_unlink aio_rmdir aio_readdir aio_readdirx	175	aio_stat aio_lstat aio_unlink aio_rmdir aio_readdir aio_readdirx
177	aio_scandir aio_symlink aio_readlink aio_realpath aio_sync	176	aio_scandir aio_symlink aio_readlink aio_realpath aio_sync
178	aio_fsync aio_syncfs aio_fdatasync aio_sync_file_range aio_fallocate	177	aio_fsync aio_syncfs aio_fdatasync aio_sync_file_range aio_allocate
179	aio_pathsync aio_readahead aio_fiemap	178	aio_pathsync aio_readahead aio_fiemap
180	aio_rename aio_link aio_move aio_copy aio_group	179	aio_rename aio_link aio_move aio_copy aio_group
181	aio_nop aio_mknod aio_load aio_rmtree aio_mkdir aio_chown	180	aio_nop aio_mknod aio_load aio_rmtree aio_mkdir aio_chown
182	aio_chmod aio_utime aio_truncate	181	aio_chmod aio_utime aio_truncate
183	aio_msync aio_mtouch aio_mlock aio_mlockall	182	aio_msync aio_mtouch aio_mlock aio_mlockall
…		…
202		201
203	=head1 FUNCTIONS	202	=head1 FUNCTIONS
204		203
205	=head2 QUICK OVERVIEW	204	=head2 QUICK OVERVIEW
206		205
207	This section simply lists the prototypes of the most important functions	206	This section simply lists the prototypes most of the functions for
208	for quick reference. See the following sections for function-by-function	207	quick reference. See the following sections for function-by-function
209	documentation.	208	documentation.
210		209
211	aio_wd $pathname, $callback->($wd)	210	aio_wd $pathname, $callback->($wd)
212	aio_open $pathname, $flags, $mode, $callback->($fh)	211	aio_open $pathname, $flags, $mode, $callback->($fh)
213	aio_close $fh, $callback->($status)	212	aio_close $fh, $callback->($status)
…		…
221	aio_statvfs $fh_or_path, $callback->($statvfs)	220	aio_statvfs $fh_or_path, $callback->($statvfs)
222	aio_utime $fh_or_path, $atime, $mtime, $callback->($status)	221	aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
223	aio_chown $fh_or_path, $uid, $gid, $callback->($status)	222	aio_chown $fh_or_path, $uid, $gid, $callback->($status)
224	aio_chmod $fh_or_path, $mode, $callback->($status)	223	aio_chmod $fh_or_path, $mode, $callback->($status)
225	aio_truncate $fh_or_path, $offset, $callback->($status)	224	aio_truncate $fh_or_path, $offset, $callback->($status)
		225	aio_allocate $fh, $mode, $offset, $len, $callback->($status)
		226	aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)
226	aio_unlink $pathname, $callback->($status)	227	aio_unlink $pathname, $callback->($status)
227	aio_mknod $pathname, $mode, $dev, $callback->($status)	228	aio_mknod $pathname, $mode, $dev, $callback->($status)
228	aio_link $srcpath, $dstpath, $callback->($status)	229	aio_link $srcpath, $dstpath, $callback->($status)
229	aio_symlink $srcpath, $dstpath, $callback->($status)	230	aio_symlink $srcpath, $dstpath, $callback->($status)
230	aio_readlink $pathname, $callback->($link)	231	aio_readlink $pathname, $callback->($link)
231	aio_realpath $pathname, $callback->($link)	232	aio_realpath $pathname, $callback->($path)
232	aio_rename $srcpath, $dstpath, $callback->($status)	233	aio_rename $srcpath, $dstpath, $callback->($status)
233	aio_mkdir $pathname, $mode, $callback->($status)	234	aio_mkdir $pathname, $mode, $callback->($status)
234	aio_rmdir $pathname, $callback->($status)	235	aio_rmdir $pathname, $callback->($status)
235	aio_readdir $pathname, $callback->($entries)	236	aio_readdir $pathname, $callback->($entries)
236	aio_readdirx $pathname, $flags, $callback->($entries, $flags)	237	aio_readdirx $pathname, $flags, $callback->($entries, $flags)
…		…
272	IO::AIO::nready	273	IO::AIO::nready
273	IO::AIO::npending	274	IO::AIO::npending
274		275
275	IO::AIO::sendfile $ofh, $ifh, $offset, $count	276	IO::AIO::sendfile $ofh, $ifh, $offset, $count
276	IO::AIO::fadvise $fh, $offset, $len, $advice	277	IO::AIO::fadvise $fh, $offset, $len, $advice
		278	IO::AIO::mmap $scalar, $length, $prot, $flags[, $fh[, $offset]]
		279	IO::AIO::munmap $scalar
277	IO::AIO::madvise $scalar, $offset, $length, $advice	280	IO::AIO::madvise $scalar, $offset, $length, $advice
278	IO::AIO::mprotect $scalar, $offset, $length, $protect	281	IO::AIO::mprotect $scalar, $offset, $length, $protect
279	IO::AIO::munlock $scalar, $offset = 0, $length = undef	282	IO::AIO::munlock $scalar, $offset = 0, $length = undef
280	IO::AIO::munlockall	283	IO::AIO::munlockall
281		284
…		…
358		361
359		362
360	=item aio_open $pathname, $flags, $mode, $callback->($fh)	363	=item aio_open $pathname, $flags, $mode, $callback->($fh)
361		364
362	Asynchronously open or create a file and call the callback with a newly	365	Asynchronously open or create a file and call the callback with a newly
363	created filehandle for the file.	366	created filehandle for the file (or C<undef> in case of an error).
364		367
365	The pathname passed to C<aio_open> must be absolute. See API NOTES, above,	368	The pathname passed to C<aio_open> must be absolute. See API NOTES, above,
366	for an explanation.	369	for an explanation.
367		370
368	The C<$flags> argument is a bitmask. See the C<Fcntl> module for a	371	The C<$flags> argument is a bitmask. See the C<Fcntl> module for a
…		…
599	namemax => 255,	602	namemax => 255,
600	frsize => 1024,	603	frsize => 1024,
601	fsid => 1810	604	fsid => 1810
602	}	605	}
603		606
		607	Here is a (likely partial - send me updates!) list of fsid values used by
		608	Linux - it is safe to hardcode these when C<$^O> is C<linux>:
		609
		610	0x0000adf5 adfs
		611	0x0000adff affs
		612	0x5346414f afs
		613	0x09041934 anon-inode filesystem
		614	0x00000187 autofs
		615	0x42465331 befs
		616	0x1badface bfs
		617	0x42494e4d binfmt_misc
		618	0x9123683e btrfs
		619	0x0027e0eb cgroupfs
		620	0xff534d42 cifs
		621	0x73757245 coda
		622	0x012ff7b7 coh
		623	0x28cd3d45 cramfs
		624	0x453dcd28 cramfs-wend (wrong endianness)
		625	0x64626720 debugfs
		626	0x00001373 devfs
		627	0x00001cd1 devpts
		628	0x0000f15f ecryptfs
		629	0x00414a53 efs
		630	0x0000137d ext
		631	0x0000ef53 ext2/ext3
		632	0x0000ef51 ext2
		633	0x00004006 fat
		634	0x65735546 fuseblk
		635	0x65735543 fusectl
		636	0x0bad1dea futexfs
		637	0x01161970 gfs2
		638	0x47504653 gpfs
		639	0x00004244 hfs
		640	0xf995e849 hpfs
		641	0x958458f6 hugetlbfs
		642	0x2bad1dea inotifyfs
		643	0x00009660 isofs
		644	0x000072b6 jffs2
		645	0x3153464a jfs
		646	0x6b414653 k-afs
		647	0x0bd00bd0 lustre
		648	0x0000137f minix
		649	0x0000138f minix 30 char names
		650	0x00002468 minix v2
		651	0x00002478 minix v2 30 char names
		652	0x00004d5a minix v3
		653	0x19800202 mqueue
		654	0x00004d44 msdos
		655	0x0000564c novell
		656	0x00006969 nfs
		657	0x6e667364 nfsd
		658	0x00003434 nilfs
		659	0x5346544e ntfs
		660	0x00009fa1 openprom
		661	0x7461636F ocfs2
		662	0x00009fa0 proc
		663	0x6165676c pstorefs
		664	0x0000002f qnx4
		665	0x858458f6 ramfs
		666	0x52654973 reiserfs
		667	0x00007275 romfs
		668	0x67596969 rpc_pipefs
		669	0x73636673 securityfs
		670	0xf97cff8c selinux
		671	0x0000517b smb
		672	0x534f434b sockfs
		673	0x73717368 squashfs
		674	0x62656572 sysfs
		675	0x012ff7b6 sysv2
		676	0x012ff7b5 sysv4
		677	0x01021994 tmpfs
		678	0x15013346 udf
		679	0x00011954 ufs
		680	0x54190100 ufs byteswapped
		681	0x00009fa2 usbdevfs
		682	0x01021997 v9fs
		683	0xa501fcf5 vxfs
		684	0xabba1974 xenfs
		685	0x012ff7b4 xenix
		686	0x58465342 xfs
		687	0x012fd16d xia
604		688
605	=item aio_utime $fh_or_path, $atime, $mtime, $callback->($status)	689	=item aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
606		690
607	Works like perl's C<utime> function (including the special case of $atime	691	Works like perl's C<utime> function (including the special case of $atime
608	and $mtime being undef). Fractional times are supported if the underlying	692	and $mtime being undef). Fractional times are supported if the underlying
…		…
636	=item aio_truncate $fh_or_path, $offset, $callback->($status)	720	=item aio_truncate $fh_or_path, $offset, $callback->($status)
637		721
638	Works like truncate(2) or ftruncate(2).	722	Works like truncate(2) or ftruncate(2).
639		723
640		724
		725	=item aio_allocate $fh, $mode, $offset, $len, $callback->($status)
		726
		727	Allocates or frees disk space according to the C<$mode> argument. See the
		728	linux C<fallocate> documentation for details.
		729
		730	C<$mode> can currently be C<0> or C<IO::AIO::FALLOC_FL_KEEP_SIZE>
		731	to allocate space, or C<IO::AIO::FALLOC_FL_PUNCH_HOLE \|
		732	IO::AIO::FALLOC_FL_KEEP_SIZE>, to deallocate a file range.
		733
		734	The file system block size used by C<fallocate> is presumably the
		735	C<f_bsize> returned by C<statvfs>.
		736
		737	If C<fallocate> isn't available or cannot be emulated (currently no
		738	emulation will be attempted), passes C<-1> and sets C<$!> to C<ENOSYS>.
		739
		740
641	=item aio_chmod $fh_or_path, $mode, $callback->($status)	741	=item aio_chmod $fh_or_path, $mode, $callback->($status)
642		742
643	Works like perl's C<chmod> function.	743	Works like perl's C<chmod> function.
644		744
645		745
…		…
682		782
683		783
684	=item aio_realpath $pathname, $callback->($path)	784	=item aio_realpath $pathname, $callback->($path)
685		785
686	Asynchronously make the path absolute and resolve any symlinks in	786	Asynchronously make the path absolute and resolve any symlinks in
687	C<$path>. The resulting path only consists of directories (Same as	787	C<$path>. The resulting path only consists of directories (same as
688	L<Cwd::realpath>).	788	L<Cwd::realpath>).
689		789
690	This request can be used to get the absolute path of the current working	790	This request can be used to get the absolute path of the current working
691	directory by passing it a path of F<.> (a single dot).	791	directory by passing it a path of F<.> (a single dot).
692		792
693		793
694	=item aio_rename $srcpath, $dstpath, $callback->($status)	794	=item aio_rename $srcpath, $dstpath, $callback->($status)
695		795
696	Asynchronously rename the object at C<$srcpath> to C<$dstpath>, just as	796	Asynchronously rename the object at C<$srcpath> to C<$dstpath>, just as
697	rename(2) and call the callback with the result code.	797	rename(2) and call the callback with the result code.
		798
		799	On systems that support the AIO::WD working directory abstraction
		800	natively, the case C<[$wd, "."]> as C<$srcpath> is specialcased - instead
		801	of failing, C<rename> is called on the absolute path of C<$wd>.
698		802
699		803
700	=item aio_mkdir $pathname, $mode, $callback->($status)	804	=item aio_mkdir $pathname, $mode, $callback->($status)
701		805
702	Asynchronously mkdir (create) a directory and call the callback with	806	Asynchronously mkdir (create) a directory and call the callback with
…		…
706		810
707	=item aio_rmdir $pathname, $callback->($status)	811	=item aio_rmdir $pathname, $callback->($status)
708		812
709	Asynchronously rmdir (delete) a directory and call the callback with the	813	Asynchronously rmdir (delete) a directory and call the callback with the
710	result code.	814	result code.
		815
		816	On systems that support the AIO::WD working directory abstraction
		817	natively, the case C<[$wd, "."]> is specialcased - instead of failing,
		818	C<rmdir> is called on the absolute path of C<$wd>.
711		819
712		820
713	=item aio_readdir $pathname, $callback->($entries)	821	=item aio_readdir $pathname, $callback->($entries)
714		822
715	Unlike the POSIX call of the same name, C<aio_readdir> reads an entire	823	Unlike the POSIX call of the same name, C<aio_readdir> reads an entire
…		…
1080	}	1188	}
1081		1189
1082	=item aio_rmtree $pathname, $callback->($status)	1190	=item aio_rmtree $pathname, $callback->($status)
1083		1191
1084	Delete a directory tree starting (and including) C<$path>, return the	1192	Delete a directory tree starting (and including) C<$path>, return the
1085	status of the final C<rmdir> only. This is a composite request that	1193	status of the final C<rmdir> only. This is a composite request that
1086	uses C<aio_scandir> to recurse into and rmdir directories, and unlink	1194	uses C<aio_scandir> to recurse into and rmdir directories, and unlink
1087	everything else.	1195	everything else.
1088		1196
1089	=cut	1197	=cut
1090		1198
…		…
1210		1318
1211	This is a rather advanced IO::AIO call, which works best on mmap(2)ed	1319	This is a rather advanced IO::AIO call, which works best on mmap(2)ed
1212	scalars.	1320	scalars.
1213		1321
1214	It touches (reads or writes) all memory pages in the specified	1322	It touches (reads or writes) all memory pages in the specified
1215	range inside the scalar. All caveats and parameters are the same	1323	range inside the scalar. All caveats and parameters are the same
1216	as for C<aio_msync>, above, except for flags, which must be either	1324	as for C<aio_msync>, above, except for flags, which must be either
1217	C<0> (which reads all pages and ensures they are instantiated) or	1325	C<0> (which reads all pages and ensures they are instantiated) or
1218	C<IO::AIO::MT_MODIFY>, which modifies the memory page s(by reading and	1326	C<IO::AIO::MT_MODIFY>, which modifies the memory pages (by reading and
1219	writing an octet from it, which dirties the page).	1327	writing an octet from it, which dirties the page).
1220		1328
1221	=item aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)	1329	=item aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
1222		1330
1223	This is a rather advanced IO::AIO call, which works best on mmap(2)ed	1331	This is a rather advanced IO::AIO call, which works best on mmap(2)ed
…		…
1257		1365
1258	aio_mlockall IO::AIO::MCL_FUTURE;	1366	aio_mlockall IO::AIO::MCL_FUTURE;
1259		1367
1260	=item aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)	1368	=item aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)
1261		1369
1262	Queries the extents of the given file (by calling the Linux FIEMAP ioctl,	1370	Queries the extents of the given file (by calling the Linux C<FIEMAP>
1263	see L<http://cvs.schmorp.de/IO-AIO/doc/fiemap.txt> for details). If the	1371	ioctl, see L<http://cvs.schmorp.de/IO-AIO/doc/fiemap.txt> for details). If
1264	C<ioctl> is not available on your OS, then this rquiest will fail with	1372	the ioctl is not available on your OS, then this request will fail with
1265	C<ENOSYS>.	1373	C<ENOSYS>.
1266		1374
1267	C<$start> is the starting offset to query extents for, C<$length> is the	1375	C<$start> is the starting offset to query extents for, C<$length> is the
1268	size of the range to query - if it is C<undef>, then the whole file will	1376	size of the range to query - if it is C<undef>, then the whole file will
1269	be queried.	1377	be queried.
…		…
1272	C<IO::AIO::FIEMAP_FLAG_XATTR> - C<IO::AIO::FIEMAP_FLAGS_COMPAT> is also	1380	C<IO::AIO::FIEMAP_FLAG_XATTR> - C<IO::AIO::FIEMAP_FLAGS_COMPAT> is also
1273	exported), and is normally C<0> or C<IO::AIO::FIEMAP_FLAG_SYNC> to query	1381	exported), and is normally C<0> or C<IO::AIO::FIEMAP_FLAG_SYNC> to query
1274	the data portion.	1382	the data portion.
1275		1383
1276	C<$count> is the maximum number of extent records to return. If it is	1384	C<$count> is the maximum number of extent records to return. If it is
1277	C<undef>, then IO::AIO queries all extents of the file. As a very special	1385	C<undef>, then IO::AIO queries all extents of the range. As a very special
1278	case, if it is C<0>, then the callback receives the number of extents	1386	case, if it is C<0>, then the callback receives the number of extents
1279	instead of the extents themselves.	1387	instead of the extents themselves (which is unreliable, see below).
1280		1388
1281	If an error occurs, the callback receives no arguments. The special	1389	If an error occurs, the callback receives no arguments. The special
1282	C<errno> value C<IO::AIO::EBADR> is available to test for flag errors.	1390	C<errno> value C<IO::AIO::EBADR> is available to test for flag errors.
1283		1391
1284	Otherwise, the callback receives an array reference with extent	1392	Otherwise, the callback receives an array reference with extent
…		…
1286	following members:	1394	following members:
1287		1395
1288	[$logical, $physical, $length, $flags]	1396	[$logical, $physical, $length, $flags]
1289		1397
1290	Flags is any combination of the following flag values (typically either C<0>	1398	Flags is any combination of the following flag values (typically either C<0>
1291	or C<IO::AIO::FIEMAP_EXTENT_LAST>):	1399	or C<IO::AIO::FIEMAP_EXTENT_LAST> (1)):
1292		1400
1293	C<IO::AIO::FIEMAP_EXTENT_LAST>, C<IO::AIO::FIEMAP_EXTENT_UNKNOWN>,	1401	C<IO::AIO::FIEMAP_EXTENT_LAST>, C<IO::AIO::FIEMAP_EXTENT_UNKNOWN>,
1294	C<IO::AIO::FIEMAP_EXTENT_DELALLOC>, C<IO::AIO::FIEMAP_EXTENT_ENCODED>,	1402	C<IO::AIO::FIEMAP_EXTENT_DELALLOC>, C<IO::AIO::FIEMAP_EXTENT_ENCODED>,
1295	C<IO::AIO::FIEMAP_EXTENT_DATA_ENCRYPTED>, C<IO::AIO::FIEMAP_EXTENT_NOT_ALIGNED>,	1403	C<IO::AIO::FIEMAP_EXTENT_DATA_ENCRYPTED>, C<IO::AIO::FIEMAP_EXTENT_NOT_ALIGNED>,
1296	C<IO::AIO::FIEMAP_EXTENT_DATA_INLINE>, C<IO::AIO::FIEMAP_EXTENT_DATA_TAIL>,	1404	C<IO::AIO::FIEMAP_EXTENT_DATA_INLINE>, C<IO::AIO::FIEMAP_EXTENT_DATA_TAIL>,
1297	C<IO::AIO::FIEMAP_EXTENT_UNWRITTEN>, C<IO::AIO::FIEMAP_EXTENT_MERGED> or	1405	C<IO::AIO::FIEMAP_EXTENT_UNWRITTEN>, C<IO::AIO::FIEMAP_EXTENT_MERGED> or
1298	C<IO::AIO::FIEMAP_EXTENT_SHARED>.	1406	C<IO::AIO::FIEMAP_EXTENT_SHARED>.
		1407
		1408	At the time of this writing (Linux 3.2), this requets is unreliable unless
		1409	C<$count> is C<undef>, as the kernel has all sorts of bugs preventing
		1410	it to return all extents of a range for files with large number of
		1411	extents. The code works around all these issues if C<$count> is undef.
1299		1412
1300	=item aio_group $callback->(...)	1413	=item aio_group $callback->(...)
1301		1414
1302	This is a very special aio request: Instead of doing something, it is a	1415	This is a very special aio request: Instead of doing something, it is a
1303	container for other aio requests, which is useful if you want to bundle	1416	container for other aio requests, which is useful if you want to bundle
…		…
1419	will still point to the original directory. Most functions accepting a	1532	will still point to the original directory. Most functions accepting a
1420	pathname will use the directory fd on newer systems, and the string on	1533	pathname will use the directory fd on newer systems, and the string on
1421	older systems. Some functions (such as realpath) will always rely on the	1534	older systems. Some functions (such as realpath) will always rely on the
1422	string form of the pathname.	1535	string form of the pathname.
1423		1536
1424	So this fucntionality is mainly useful to get some protection against	1537	So this functionality is mainly useful to get some protection against
1425	C<chdir>, to easily get an absolute path out of a relative path for future	1538	C<chdir>, to easily get an absolute path out of a relative path for future
1426	reference, and to speed up doing many operations in the same directory	1539	reference, and to speed up doing many operations in the same directory
1427	(e.g. when stat'ing all files in a directory).	1540	(e.g. when stat'ing all files in a directory).
1428		1541
1429	The following functions implement this working directory abstraction:	1542	The following functions implement this working directory abstraction:
…		…
1442	passing C<undef> as working directory component of a pathname fails the	1555	passing C<undef> as working directory component of a pathname fails the
1443	request with C<ENOENT>, there is often no need for error checking in the	1556	request with C<ENOENT>, there is often no need for error checking in the
1444	C<aio_wd> callback, as future requests using the value will fail in the	1557	C<aio_wd> callback, as future requests using the value will fail in the
1445	expected way.	1558	expected way.
1446		1559
1447	If this call isn't available because your OS lacks it or it couldn't be
1448	detected, it will be emulated by calling C<fsync> instead.
1449
1450	=item IO::AIO::CWD	1560	=item IO::AIO::CWD
1451		1561
1452	This is a compiletime constant (object) that represents the process	1562	This is a compiletime constant (object) that represents the process
1453	current working directory.	1563	current working directory.
1454		1564
1455	Specifying this object as working directory object for a pathname is as	1565	Specifying this object as working directory object for a pathname is as if
1456	if the pathname would be specified directly, without a directory object,	1566	the pathname would be specified directly, without a directory object. For
1457	e.g., these calls are functionally identical:	1567	example, these calls are functionally identical:
1458		1568
1459	aio_stat "somefile", sub { ... };	1569	aio_stat "somefile", sub { ... };
1460	aio_stat [IO::AIO::CWD, "somefile"], sub { ... };	1570	aio_stat [IO::AIO::CWD, "somefile"], sub { ... };
1461		1571
1462	=back	1572	=back
1463		1573
		1574	To recover the path associated with an IO::AIO::WD object, you can use
		1575	C<aio_realpath>:
		1576
		1577	aio_realpath $wd, sub {
		1578	warn "path is $_[0]\n";
		1579	};
		1580
		1581	Currently, C<aio_statvfs> always, and C<aio_rename> and C<aio_rmdir>
		1582	sometimes, fall back to using an absolue path.
1464		1583
1465	=head2 IO::AIO::REQ CLASS	1584	=head2 IO::AIO::REQ CLASS
1466		1585
1467	All non-aggregate C<aio_*> functions return an object of this class when	1586	All non-aggregate C<aio_*> functions return an object of this class when
1468	called in non-void context.	1587	called in non-void context.
…		…
1646		1765
1647	See C<poll_cb> for an example.	1766	See C<poll_cb> for an example.
1648		1767
1649	=item IO::AIO::poll_cb	1768	=item IO::AIO::poll_cb
1650		1769
1651	Process some outstanding events on the result pipe. You have to call	1770	Process some requests that have reached the result phase (i.e. they have
		1771	been executed but the results are not yet reported). You have to call
		1772	this "regularly" to finish outstanding requests.
		1773
1652	this regularly. Returns C<0> if all events could be processed (or there	1774	Returns C<0> if all events could be processed (or there were no
1653	were no events to process), or C<-1> if it returned earlier for whatever	1775	events to process), or C<-1> if it returned earlier for whatever
1654	reason. Returns immediately when no events are outstanding. The amount of	1776	reason. Returns immediately when no events are outstanding. The amount
1655	events processed depends on the settings of C<IO::AIO::max_poll_req> and	1777	of events processed depends on the settings of C<IO::AIO::max_poll_req>,
1656	C<IO::AIO::max_poll_time>.	1778	C<IO::AIO::max_poll_time> and C<IO::AIO::max_outstanding>.
1657		1779
1658	If not all requests were processed for whatever reason, the filehandle	1780	If not all requests were processed for whatever reason, the poll file
1659	will still be ready when C<poll_cb> returns, so normally you don't have to	1781	descriptor will still be ready when C<poll_cb> returns, so normally you
1660	do anything special to have it called later.	1782	don't have to do anything special to have it called later.
1661		1783
1662	Apart from calling C<IO::AIO::poll_cb> when the event filehandle becomes	1784	Apart from calling C<IO::AIO::poll_cb> when the event filehandle becomes
1663	ready, it can be beneficial to call this function from loops which submit	1785	ready, it can be beneficial to call this function from loops which submit
1664	a lot of requests, to make sure the results get processed when they become	1786	a lot of requests, to make sure the results get processed when they become
1665	available and not just when the loop is finished and the event loop takes	1787	available and not just when the loop is finished and the event loop takes
…		…
1674	poll => 'r', async => 1,	1796	poll => 'r', async => 1,
1675	cb => \&IO::AIO::poll_cb);	1797	cb => \&IO::AIO::poll_cb);
1676		1798
1677	=item IO::AIO::poll_wait	1799	=item IO::AIO::poll_wait
1678		1800
1679	If there are any outstanding requests and none of them in the result	1801	Wait until either at least one request is in the result phase or no
1680	phase, wait till the result filehandle becomes ready for reading (simply	1802	requests are outstanding anymore.
1681	does a C<select> on the filehandle. This is useful if you want to	1803
1682	synchronously wait for some requests to finish).	1804	This is useful if you want to synchronously wait for some requests to
		1805	become ready, without actually handling them.
1683		1806
1684	See C<nreqs> for an example.	1807	See C<nreqs> for an example.
1685		1808
1686	=item IO::AIO::poll	1809	=item IO::AIO::poll
1687		1810
…		…
1808		1931
1809	This is a very bad function to use in interactive programs because it	1932	This is a very bad function to use in interactive programs because it
1810	blocks, and a bad way to reduce concurrency because it is inexact: Better	1933	blocks, and a bad way to reduce concurrency because it is inexact: Better
1811	use an C<aio_group> together with a feed callback.	1934	use an C<aio_group> together with a feed callback.
1812		1935
1813	It's main use is in scripts without an event loop - when you want to stat	1936	Its main use is in scripts without an event loop - when you want to stat
1814	a lot of files, you can write somehting like this:	1937	a lot of files, you can write somehting like this:
1815		1938
1816	IO::AIO::max_outstanding 32;	1939	IO::AIO::max_outstanding 32;
1817		1940
1818	for my $path (...) {	1941	for my $path (...) {
…		…
1858		1981
1859	=back	1982	=back
1860		1983
1861	=head3 MISCELLANEOUS FUNCTIONS	1984	=head3 MISCELLANEOUS FUNCTIONS
1862		1985
1863	IO::AIO implements some functions that might be useful, but are not	1986	IO::AIO implements some functions that are useful when you want to use
1864	asynchronous.	1987	some "Advanced I/O" function not available to in Perl, without going the
		1988	"Asynchronous I/O" route. Many of these have an asynchronous C<aio_*>
		1989	counterpart.
1865		1990
1866	=over 4	1991	=over 4
1867		1992
1868	=item IO::AIO::sendfile $ofh, $ifh, $offset, $count	1993	=item IO::AIO::sendfile $ofh, $ifh, $offset, $count
1869		1994
…		…
1906	ENOSYS, otherwise the return value of C<mprotect>.	2031	ENOSYS, otherwise the return value of C<mprotect>.
1907		2032
1908	=item IO::AIO::mmap $scalar, $length, $prot, $flags, $fh[, $offset]	2033	=item IO::AIO::mmap $scalar, $length, $prot, $flags, $fh[, $offset]
1909		2034
1910	Memory-maps a file (or anonymous memory range) and attaches it to the	2035	Memory-maps a file (or anonymous memory range) and attaches it to the
1911	given C<$scalar>, which will act like a string scalar.	2036	given C<$scalar>, which will act like a string scalar. Returns true on
		2037	success, and false otherwise.
1912		2038
1913	The only operations allowed on the scalar are C<substr>/C<vec> that don't	2039	The only operations allowed on the scalar are C<substr>/C<vec> that don't
1914	change the string length, and most read-only operations such as copying it	2040	change the string length, and most read-only operations such as copying it
1915	or searching it with regexes and so on.	2041	or searching it with regexes and so on.
1916		2042
…		…
1975		2101
1976	Calls the GNU/Linux C<splice(2)> syscall, if available. If C<$r_off> or	2102	Calls the GNU/Linux C<splice(2)> syscall, if available. If C<$r_off> or
1977	C<$w_off> are C<undef>, then C<NULL> is passed for these, otherwise they	2103	C<$w_off> are C<undef>, then C<NULL> is passed for these, otherwise they
1978	should be the file offset.	2104	should be the file offset.
1979		2105
		2106	C<$r_fh> and C<$w_fh> should not refer to the same file, as splice might
		2107	silently corrupt the data in this case.
		2108
1980	The following symbol flag values are available: C<IO::AIO::SPLICE_F_MOVE>,	2109	The following symbol flag values are available: C<IO::AIO::SPLICE_F_MOVE>,
1981	C<IO::AIO::SPLICE_F_NONBLOCK>, C<IO::AIO::SPLICE_F_MORE> and	2110	C<IO::AIO::SPLICE_F_NONBLOCK>, C<IO::AIO::SPLICE_F_MORE> and
1982	C<IO::AIO::SPLICE_F_GIFT>.	2111	C<IO::AIO::SPLICE_F_GIFT>.
1983		2112
1984	See the C<splice(2)> manpage for details.	2113	See the C<splice(2)> manpage for details.
1985		2114
1986	=item IO::AIO::tee $r_fh, $w_fh, $length, $flags	2115	=item IO::AIO::tee $r_fh, $w_fh, $length, $flags
1987		2116
1988	Calls the GNU/Linux C<tee(2)> syscall, see it's manpage and the	2117	Calls the GNU/Linux C<tee(2)> syscall, see its manpage and the
1989	description for C<IO::AIO::splice> above for details.	2118	description for C<IO::AIO::splice> above for details.
		2119
		2120	=item $actual_size = IO::AIO::pipesize $r_fh[, $new_size]
		2121
		2122	Attempts to query or change the pipe buffer size. Obviously works only
		2123	on pipes, and currently works only on GNU/Linux systems, and fails with
		2124	C<-1>/C<ENOSYS> everywhere else. If anybody knows how to influence pipe buffer
		2125	size on other systems, drop me a note.
1990		2126
1991	=back	2127	=back
1992		2128
1993	=cut	2129	=cut
1994		2130

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing IO-AIO/AIO.pm (file contents): Revision 1.225 by root, Tue Apr 10 05:01:33 2012 UTC vs. Revision 1.249 by root, Wed Jul 30 22:00:04 2014 UTC

Diff Legend

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.225 by root, Tue Apr 10 05:01:33 2012 UTC vs.
Revision 1.249 by root, Wed Jul 30 22:00:04 2014 UTC