[ViewVC] Diff of: cvs/IO-AIO/AIO.pm

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.229 by root, Wed Jul 25 16:32:30 2012 UTC vs.
Revision 1.303 by root, Wed Apr 3 03:09:04 2019 UTC

…		…
1	=head1 NAME	1	=head1 NAME
2		2
3	IO::AIO - Asynchronous Input/Output	3	IO::AIO - Asynchronous/Advanced Input/Output
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	use IO::AIO;	7	use IO::AIO;
8		8
58	not well-supported or restricted (GNU/Linux doesn't allow them on normal	58	not well-supported or restricted (GNU/Linux doesn't allow them on normal
59	files currently, for example), and they would only support aio_read and	59	files currently, for example), and they would only support aio_read and
60	aio_write, so the remaining functionality would have to be implemented	60	aio_write, so the remaining functionality would have to be implemented
61	using threads anyway.	61	using threads anyway.
62		62
		63	In addition to asynchronous I/O, this module also exports some rather
		64	arcane interfaces, such as C<madvise> or linux's C<splice> system call,
		65	which is why the C<A> in C<AIO> can also mean I<advanced>.
		66
63	Although the module will work in the presence of other (Perl-) threads,	67	Although the module will work in the presence of other (Perl-) threads,
64	it is currently not reentrant in any way, so use appropriate locking	68	it is currently not reentrant in any way, so use appropriate locking
65	yourself, always call C<poll_cb> from within the same thread, or never	69	yourself, always call C<poll_cb> from within the same thread, or never
66	call C<poll_cb> (or other C<aio_> functions) recursively.	70	call C<poll_cb> (or other C<aio_> functions) recursively.
67		71
68	=head2 EXAMPLE	72	=head2 EXAMPLE
69		73
70	This is a simple example that uses the EV module and loads	74	This is a simple example that uses the EV module and loads
71	F</etc/passwd> asynchronously:	75	F</etc/passwd> asynchronously:
72		76
73	use Fcntl;
74	use EV;	77	use EV;
75	use IO::AIO;	78	use IO::AIO;
76		79
77	# register the IO::AIO callback with EV	80	# register the IO::AIO callback with EV
78	my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;	81	my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
…		…
95		98
96	# file contents now in $contents	99	# file contents now in $contents
97	print $contents;	100	print $contents;
98		101
99	# exit event loop and program	102	# exit event loop and program
100	EV::unloop;	103	EV::break;
101	};	104	};
102	};	105	};
103		106
104	# possibly queue up other requests, or open GUI windows,	107	# possibly queue up other requests, or open GUI windows,
105	# check for sockets etc. etc.	108	# check for sockets etc. etc.
106		109
107	# process events as long as there are some:	110	# process events as long as there are some:
108	EV::loop;	111	EV::run;
109		112
110	=head1 REQUEST ANATOMY AND LIFETIME	113	=head1 REQUEST ANATOMY AND LIFETIME
111		114
112	Every C<aio_*> function creates a request. which is a C data structure not	115	Every C<aio_*> function creates a request. which is a C data structure not
113	directly visible to Perl.	116	directly visible to Perl.
…		…
168	use common::sense;	171	use common::sense;
169		172
170	use base 'Exporter';	173	use base 'Exporter';
171		174
172	BEGIN {	175	BEGIN {
173	our $VERSION = '4.15';	176	our $VERSION = 4.72;
174		177
175	our @AIO_REQ = qw(aio_sendfile aio_seek aio_read aio_write aio_open aio_close	178	our @AIO_REQ = qw(aio_sendfile aio_seek aio_read aio_write aio_open aio_close
176	aio_stat aio_lstat aio_unlink aio_rmdir aio_readdir aio_readdirx	179	aio_stat aio_lstat aio_unlink aio_rmdir aio_readdir aio_readdirx
177	aio_scandir aio_symlink aio_readlink aio_realpath aio_sync	180	aio_scandir aio_symlink aio_readlink aio_realpath aio_fcntl aio_ioctl
178	aio_fsync aio_syncfs aio_fdatasync aio_sync_file_range aio_fallocate	181	aio_sync aio_fsync aio_syncfs aio_fdatasync aio_sync_file_range
179	aio_pathsync aio_readahead aio_fiemap	182	aio_pathsync aio_readahead aio_fiemap aio_allocate
180	aio_rename aio_link aio_move aio_copy aio_group	183	aio_rename aio_rename2 aio_link aio_move aio_copy aio_group
181	aio_nop aio_mknod aio_load aio_rmtree aio_mkdir aio_chown	184	aio_nop aio_mknod aio_load aio_rmtree aio_mkdir aio_chown
182	aio_chmod aio_utime aio_truncate	185	aio_chmod aio_utime aio_truncate
183	aio_msync aio_mtouch aio_mlock aio_mlockall	186	aio_msync aio_mtouch aio_mlock aio_mlockall
184	aio_statvfs	187	aio_statvfs
		188	aio_slurp
185	aio_wd);	189	aio_wd);
186		190
187	our @EXPORT = (@AIO_REQ, qw(aioreq_pri aioreq_nice));	191	our @EXPORT = (@AIO_REQ, qw(aioreq_pri aioreq_nice));
188	our @EXPORT_OK = qw(poll_fileno poll_cb poll_wait flush	192	our @EXPORT_OK = qw(poll_fileno poll_cb poll_wait flush
189	min_parallel max_parallel max_idle idle_timeout	193	min_parallel max_parallel max_idle idle_timeout
190	nreqs nready npending nthreads	194	nreqs nready npending nthreads
191	max_poll_time max_poll_reqs	195	max_poll_time max_poll_reqs
192	sendfile fadvise madvise	196	sendfile fadvise madvise
193	mmap munmap munlock munlockall);	197	mmap munmap mremap munlock munlockall);
194		198
195	push @AIO_REQ, qw(aio_busy); # not exported	199	push @AIO_REQ, qw(aio_busy); # not exported
196		200
197	@IO::AIO::GRP::ISA = 'IO::AIO::REQ';	201	@IO::AIO::GRP::ISA = 'IO::AIO::REQ';
198		202
…		…
202		206
203	=head1 FUNCTIONS	207	=head1 FUNCTIONS
204		208
205	=head2 QUICK OVERVIEW	209	=head2 QUICK OVERVIEW
206		210
207	This section simply lists the prototypes of the most important functions	211	This section simply lists the prototypes most of the functions for
208	for quick reference. See the following sections for function-by-function	212	quick reference. See the following sections for function-by-function
209	documentation.	213	documentation.
210		214
211	aio_wd $pathname, $callback->($wd)	215	aio_wd $pathname, $callback->($wd)
212	aio_open $pathname, $flags, $mode, $callback->($fh)	216	aio_open $pathname, $flags, $mode, $callback->($fh)
213	aio_close $fh, $callback->($status)	217	aio_close $fh, $callback->($status)
…		…
222	aio_utime $fh_or_path, $atime, $mtime, $callback->($status)	226	aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
223	aio_chown $fh_or_path, $uid, $gid, $callback->($status)	227	aio_chown $fh_or_path, $uid, $gid, $callback->($status)
224	aio_chmod $fh_or_path, $mode, $callback->($status)	228	aio_chmod $fh_or_path, $mode, $callback->($status)
225	aio_truncate $fh_or_path, $offset, $callback->($status)	229	aio_truncate $fh_or_path, $offset, $callback->($status)
226	aio_allocate $fh, $mode, $offset, $len, $callback->($status)	230	aio_allocate $fh, $mode, $offset, $len, $callback->($status)
		231	aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)
227	aio_unlink $pathname, $callback->($status)	232	aio_unlink $pathname, $callback->($status)
228	aio_mknod $pathname, $mode, $dev, $callback->($status)	233	aio_mknod $pathname, $mode, $dev, $callback->($status)
229	aio_link $srcpath, $dstpath, $callback->($status)	234	aio_link $srcpath, $dstpath, $callback->($status)
230	aio_symlink $srcpath, $dstpath, $callback->($status)	235	aio_symlink $srcpath, $dstpath, $callback->($status)
231	aio_readlink $pathname, $callback->($link)	236	aio_readlink $pathname, $callback->($link)
232	aio_realpath $pathname, $callback->($link)	237	aio_realpath $pathname, $callback->($path)
233	aio_rename $srcpath, $dstpath, $callback->($status)	238	aio_rename $srcpath, $dstpath, $callback->($status)
		239	aio_rename2 $srcpath, $dstpath, $flags, $callback->($status)
234	aio_mkdir $pathname, $mode, $callback->($status)	240	aio_mkdir $pathname, $mode, $callback->($status)
235	aio_rmdir $pathname, $callback->($status)	241	aio_rmdir $pathname, $callback->($status)
236	aio_readdir $pathname, $callback->($entries)	242	aio_readdir $pathname, $callback->($entries)
237	aio_readdirx $pathname, $flags, $callback->($entries, $flags)	243	aio_readdirx $pathname, $flags, $callback->($entries, $flags)
238	IO::AIO::READDIR_DENTS IO::AIO::READDIR_DIRS_FIRST	244	IO::AIO::READDIR_DENTS IO::AIO::READDIR_DIRS_FIRST
…		…
240	aio_scandir $pathname, $maxreq, $callback->($dirs, $nondirs)	246	aio_scandir $pathname, $maxreq, $callback->($dirs, $nondirs)
241	aio_load $pathname, $data, $callback->($status)	247	aio_load $pathname, $data, $callback->($status)
242	aio_copy $srcpath, $dstpath, $callback->($status)	248	aio_copy $srcpath, $dstpath, $callback->($status)
243	aio_move $srcpath, $dstpath, $callback->($status)	249	aio_move $srcpath, $dstpath, $callback->($status)
244	aio_rmtree $pathname, $callback->($status)	250	aio_rmtree $pathname, $callback->($status)
		251	aio_fcntl $fh, $cmd, $arg, $callback->($status)
		252	aio_ioctl $fh, $request, $buf, $callback->($status)
245	aio_sync $callback->($status)	253	aio_sync $callback->($status)
246	aio_syncfs $fh, $callback->($status)	254	aio_syncfs $fh, $callback->($status)
247	aio_fsync $fh, $callback->($status)	255	aio_fsync $fh, $callback->($status)
248	aio_fdatasync $fh, $callback->($status)	256	aio_fdatasync $fh, $callback->($status)
249	aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)	257	aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)
250	aio_pathsync $pathname, $callback->($status)	258	aio_pathsync $pathname, $callback->($status)
251	aio_msync $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)	259	aio_msync $scalar, $offset = 0, $length = undef, flags = MS_SYNC, $callback->($status)
252	aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)	260	aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
253	aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)	261	aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
254	aio_mlockall $flags, $callback->($status)	262	aio_mlockall $flags, $callback->($status)
255	aio_group $callback->(...)	263	aio_group $callback->(...)
256	aio_nop $callback->()	264	aio_nop $callback->()
…		…
270	IO::AIO::idle_timeout $seconds	278	IO::AIO::idle_timeout $seconds
271	IO::AIO::max_outstanding $maxreqs	279	IO::AIO::max_outstanding $maxreqs
272	IO::AIO::nreqs	280	IO::AIO::nreqs
273	IO::AIO::nready	281	IO::AIO::nready
274	IO::AIO::npending	282	IO::AIO::npending
		283	IO::AIO::reinit
		284
		285	$nfd = IO::AIO::get_fdlimit [EXPERIMENTAL]
		286	IO::AIO::min_fdlimit $nfd [EXPERIMENTAL]
275		287
276	IO::AIO::sendfile $ofh, $ifh, $offset, $count	288	IO::AIO::sendfile $ofh, $ifh, $offset, $count
277	IO::AIO::fadvise $fh, $offset, $len, $advice	289	IO::AIO::fadvise $fh, $offset, $len, $advice
		290
278	IO::AIO::mmap $scalar, $length, $prot, $flags[, $fh[, $offset]]	291	IO::AIO::mmap $scalar, $length, $prot, $flags[, $fh[, $offset]]
279	IO::AIO::munmap $scalar	292	IO::AIO::munmap $scalar
		293	IO::AIO::mremap $scalar, $new_length, $flags[, $new_address]
280	IO::AIO::madvise $scalar, $offset, $length, $advice	294	IO::AIO::madvise $scalar, $offset, $length, $advice
281	IO::AIO::mprotect $scalar, $offset, $length, $protect	295	IO::AIO::mprotect $scalar, $offset, $length, $protect
282	IO::AIO::munlock $scalar, $offset = 0, $length = undef	296	IO::AIO::munlock $scalar, $offset = 0, $length = undef
283	IO::AIO::munlockall	297	IO::AIO::munlockall
		298
		299	# stat extensions
		300	$counter = IO::AIO::st_gen
		301	$seconds = IO::AIO::st_atime, IO::AIO::st_mtime, IO::AIO::st_ctime, IO::AIO::st_btime
		302	($atime, $mtime, $ctime, $btime, ...) = IO::AIO::st_xtime
		303	$nanoseconds = IO::AIO::st_atimensec, IO::AIO::st_mtimensec, IO::AIO::st_ctimensec, IO::AIO::st_btimensec
		304	$seconds = IO::AIO::st_btimesec
		305	($atime, $mtime, $ctime, $btime, ...) = IO::AIO::st_xtimensec
		306
		307	# very much unportable syscalls
		308	IO::AIO::splice $r_fh, $r_off, $w_fh, $w_off, $length, $flags
		309	IO::AIO::tee $r_fh, $w_fh, $length, $flags
		310	$actual_size = IO::AIO::pipesize $r_fh[, $new_size]
		311	($rfh, $wfh) = IO::AIO::pipe2 [$flags]
		312	$fh = IO::AIO::memfd_create $pathname[, $flags]
		313	$fh = IO::AIO::eventfd [$initval, [$flags]]
		314	$fh = IO::AIO::timerfd_create $clockid[, $flags]
		315	($cur_interval, $cur_value) = IO::AIO::timerfd_settime $fh, $flags, $new_interval, $nbw_value
		316	($cur_interval, $cur_value) = IO::AIO::timerfd_gettime $fh
284		317
285	=head2 API NOTES	318	=head2 API NOTES
286		319
287	All the C<aio_*> calls are more or less thin wrappers around the syscall	320	All the C<aio_*> calls are more or less thin wrappers around the syscall
288	with the same name (sans C<aio_>). The arguments are similar or identical,	321	with the same name (sans C<aio_>). The arguments are similar or identical,
…		…
361		394
362		395
363	=item aio_open $pathname, $flags, $mode, $callback->($fh)	396	=item aio_open $pathname, $flags, $mode, $callback->($fh)
364		397
365	Asynchronously open or create a file and call the callback with a newly	398	Asynchronously open or create a file and call the callback with a newly
366	created filehandle for the file.	399	created filehandle for the file (or C<undef> in case of an error).
367		400
368	The pathname passed to C<aio_open> must be absolute. See API NOTES, above,	401	The pathname passed to C<aio_open> must be absolute. See API NOTES, above,
369	for an explanation.	402	for an explanation.
370		403
371	The C<$flags> argument is a bitmask. See the C<Fcntl> module for a	404	The C<$flags> argument is a bitmask. See the C<Fcntl> module for a
…		…
394	following POSIX and non-POSIX constants are available (missing ones on	427	following POSIX and non-POSIX constants are available (missing ones on
395	your system are, as usual, C<0>):	428	your system are, as usual, C<0>):
396		429
397	C<O_ASYNC>, C<O_DIRECT>, C<O_NOATIME>, C<O_CLOEXEC>, C<O_NOCTTY>, C<O_NOFOLLOW>,	430	C<O_ASYNC>, C<O_DIRECT>, C<O_NOATIME>, C<O_CLOEXEC>, C<O_NOCTTY>, C<O_NOFOLLOW>,
398	C<O_NONBLOCK>, C<O_EXEC>, C<O_SEARCH>, C<O_DIRECTORY>, C<O_DSYNC>,	431	C<O_NONBLOCK>, C<O_EXEC>, C<O_SEARCH>, C<O_DIRECTORY>, C<O_DSYNC>,
399	C<O_RSYNC>, C<O_SYNC> and C<O_TTY_INIT>.	432	C<O_RSYNC>, C<O_SYNC>, C<O_PATH>, C<O_TMPFILE>, C<O_TTY_INIT> and C<O_ACCMODE>.
400		433
401		434
402	=item aio_close $fh, $callback->($status)	435	=item aio_close $fh, $callback->($status)
403		436
404	Asynchronously close a file and call the callback with the result	437	Asynchronously close a file and call the callback with the result
…		…
439	=item aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)	472	=item aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
440		473
441	=item aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)	474	=item aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
442		475
443	Reads or writes C<$length> bytes from or to the specified C<$fh> and	476	Reads or writes C<$length> bytes from or to the specified C<$fh> and
444	C<$offset> into the scalar given by C<$data> and offset C<$dataoffset>	477	C<$offset> into the scalar given by C<$data> and offset C<$dataoffset> and
445	and calls the callback without the actual number of bytes read (or -1 on	478	calls the callback with the actual number of bytes transferred (or -1 on
446	error, just like the syscall).	479	error, just like the syscall).
447		480
448	C<aio_read> will, like C<sysread>, shrink or grow the C<$data> scalar to	481	C<aio_read> will, like C<sysread>, shrink or grow the C<$data> scalar to
449	offset plus the actual number of bytes read.	482	offset plus the actual number of bytes read.
450		483
…		…
508	As native sendfile syscalls (as practically any non-POSIX interface hacked	541	As native sendfile syscalls (as practically any non-POSIX interface hacked
509	together in a hurry to improve benchmark numbers) tend to be rather buggy	542	together in a hurry to improve benchmark numbers) tend to be rather buggy
510	on many systems, this implementation tries to work around some known bugs	543	on many systems, this implementation tries to work around some known bugs
511	in Linux and FreeBSD kernels (probably others, too), but that might fail,	544	in Linux and FreeBSD kernels (probably others, too), but that might fail,
512	so you really really should check the return value of C<aio_sendfile> -	545	so you really really should check the return value of C<aio_sendfile> -
513	fewre bytes than expected might have been transferred.	546	fewer bytes than expected might have been transferred.
514		547
515		548
516	=item aio_readahead $fh,$offset,$length, $callback->($retval)	549	=item aio_readahead $fh,$offset,$length, $callback->($retval)
517		550
518	C<aio_readahead> populates the page cache with data from a file so that	551	C<aio_readahead> populates the page cache with data from a file so that
…		…
522	whole pages, so that offset is effectively rounded down to a page boundary	555	whole pages, so that offset is effectively rounded down to a page boundary
523	and bytes are read up to the next page boundary greater than or equal to	556	and bytes are read up to the next page boundary greater than or equal to
524	(off-set+length). C<aio_readahead> does not read beyond the end of the	557	(off-set+length). C<aio_readahead> does not read beyond the end of the
525	file. The current file offset of the file is left unchanged.	558	file. The current file offset of the file is left unchanged.
526		559
527	If that syscall doesn't exist (likely if your OS isn't Linux) it will be	560	If that syscall doesn't exist (likely if your kernel isn't Linux) it will
528	emulated by simply reading the data, which would have a similar effect.	561	be emulated by simply reading the data, which would have a similar effect.
529		562
530		563
531	=item aio_stat $fh_or_path, $callback->($status)	564	=item aio_stat $fh_or_path, $callback->($status)
532		565
533	=item aio_lstat $fh, $callback->($status)	566	=item aio_lstat $fh, $callback->($status)
534		567
535	Works like perl's C<stat> or C<lstat> in void context. The callback will	568	Works almost exactly like perl's C<stat> or C<lstat> in void context. The
536	be called after the stat and the results will be available using C<stat _>	569	callback will be called after the stat and the results will be available
537	or C<-s _> etc...	570	using C<stat _> or C<-s _> and other tests (with the exception of C<-B>
		571	and C<-T>).
538		572
539	The pathname passed to C<aio_stat> must be absolute. See API NOTES, above,	573	The pathname passed to C<aio_stat> must be absolute. See API NOTES, above,
540	for an explanation.	574	for an explanation.
541		575
542	Currently, the stats are always 64-bit-stats, i.e. instead of returning an	576	Currently, the stats are always 64-bit-stats, i.e. instead of returning an
…		…
549	behaviour).	583	behaviour).
550		584
551	C<S_IFMT>, C<S_IFIFO>, C<S_IFCHR>, C<S_IFBLK>, C<S_IFLNK>, C<S_IFREG>,	585	C<S_IFMT>, C<S_IFIFO>, C<S_IFCHR>, C<S_IFBLK>, C<S_IFLNK>, C<S_IFREG>,
552	C<S_IFDIR>, C<S_IFWHT>, C<S_IFSOCK>, C<IO::AIO::major $dev_t>,	586	C<S_IFDIR>, C<S_IFWHT>, C<S_IFSOCK>, C<IO::AIO::major $dev_t>,
553	C<IO::AIO::minor $dev_t>, C<IO::AIO::makedev $major, $minor>.	587	C<IO::AIO::minor $dev_t>, C<IO::AIO::makedev $major, $minor>.
		588
		589	To access higher resolution stat timestamps, see L<SUBSECOND STAT TIME
		590	ACCESS>.
554		591
555	Example: Print the length of F</etc/passwd>:	592	Example: Print the length of F</etc/passwd>:
556		593
557	aio_stat "/etc/passwd", sub {	594	aio_stat "/etc/passwd", sub {
558	$_[0] and die "stat failed: $!";	595	$_[0] and die "stat failed: $!";
…		…
602	namemax => 255,	639	namemax => 255,
603	frsize => 1024,	640	frsize => 1024,
604	fsid => 1810	641	fsid => 1810
605	}	642	}
606		643
607
608	=item aio_utime $fh_or_path, $atime, $mtime, $callback->($status)	644	=item aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
609		645
610	Works like perl's C<utime> function (including the special case of $atime	646	Works like perl's C<utime> function (including the special case of $atime
611	and $mtime being undef). Fractional times are supported if the underlying	647	and $mtime being undef). Fractional times are supported if the underlying
612	syscalls support them.	648	syscalls support them.
613		649
614	When called with a pathname, uses utimes(2) if available, otherwise	650	When called with a pathname, uses utimensat(2) or utimes(2) if available,
615	utime(2). If called on a file descriptor, uses futimes(2) if available,	651	otherwise utime(2). If called on a file descriptor, uses futimens(2)
616	otherwise returns ENOSYS, so this is not portable.	652	or futimes(2) if available, otherwise returns ENOSYS, so this is not
		653	portable.
617		654
618	Examples:	655	Examples:
619		656
620	# set atime and mtime to current time (basically touch(1)):	657	# set atime and mtime to current time (basically touch(1)):
621	aio_utime "path", undef, undef;	658	aio_utime "path", undef, undef;
…		…
641	Works like truncate(2) or ftruncate(2).	678	Works like truncate(2) or ftruncate(2).
642		679
643		680
644	=item aio_allocate $fh, $mode, $offset, $len, $callback->($status)	681	=item aio_allocate $fh, $mode, $offset, $len, $callback->($status)
645		682
646	Allocates or freed disk space according to the C<$mode> argument. See the	683	Allocates or frees disk space according to the C<$mode> argument. See the
647	linux C<fallocate> docuemntation for details.	684	linux C<fallocate> documentation for details.
648		685
649	C<$mode> can currently be C<0> or C<IO::AIO::FALLOC_FL_KEEP_SIZE>	686	C<$mode> is usually C<0> or C<IO::AIO::FALLOC_FL_KEEP_SIZE> to allocate
650	to allocate space, or C<IO::AIO::FALLOC_FL_PUNCH_HOLE \|	687	space, or C<IO::AIO::FALLOC_FL_PUNCH_HOLE \| IO::AIO::FALLOC_FL_KEEP_SIZE>,
651	IO::AIO::FALLOC_FL_KEEP_SIZE>, to deallocate a file range.	688	to deallocate a file range.
		689
		690	IO::AIO also supports C<FALLOC_FL_COLLAPSE_RANGE>, to remove a range
		691	(without leaving a hole), C<FALLOC_FL_ZERO_RANGE>, to zero a range,
		692	C<FALLOC_FL_INSERT_RANGE> to insert a range and C<FALLOC_FL_UNSHARE_RANGE>
		693	to unshare shared blocks (see your L<fallocate(2)> manpage).
652		694
653	The file system block size used by C<fallocate> is presumably the	695	The file system block size used by C<fallocate> is presumably the
654	C<f_bsize> returned by C<statvfs>.	696	C<f_bsize> returned by C<statvfs>, but different filesystems and filetypes
		697	can dictate other limitations.
655		698
656	If C<fallocate> isn't available or cannot be emulated (currently no	699	If C<fallocate> isn't available or cannot be emulated (currently no
657	emulation will be attempted), passes C<-1> and sets C<$!> to C<ENOSYS>.	700	emulation will be attempted), passes C<-1> and sets C<$!> to C<ENOSYS>.
658		701
659		702
…		…
701		744
702		745
703	=item aio_realpath $pathname, $callback->($path)	746	=item aio_realpath $pathname, $callback->($path)
704		747
705	Asynchronously make the path absolute and resolve any symlinks in	748	Asynchronously make the path absolute and resolve any symlinks in
706	C<$path>. The resulting path only consists of directories (Same as	749	C<$path>. The resulting path only consists of directories (same as
707	L<Cwd::realpath>).	750	L<Cwd::realpath>).
708		751
709	This request can be used to get the absolute path of the current working	752	This request can be used to get the absolute path of the current working
710	directory by passing it a path of F<.> (a single dot).	753	directory by passing it a path of F<.> (a single dot).
711		754
712		755
713	=item aio_rename $srcpath, $dstpath, $callback->($status)	756	=item aio_rename $srcpath, $dstpath, $callback->($status)
714		757
715	Asynchronously rename the object at C<$srcpath> to C<$dstpath>, just as	758	Asynchronously rename the object at C<$srcpath> to C<$dstpath>, just as
716	rename(2) and call the callback with the result code.	759	rename(2) and call the callback with the result code.
		760
		761	On systems that support the AIO::WD working directory abstraction
		762	natively, the case C<[$wd, "."]> as C<$srcpath> is specialcased - instead
		763	of failing, C<rename> is called on the absolute path of C<$wd>.
		764
		765
		766	=item aio_rename2 $srcpath, $dstpath, $flags, $callback->($status)
		767
		768	Basically a version of C<aio_rename> with an additional C<$flags>
		769	argument. Calling this with C<$flags=0> is the same as calling
		770	C<aio_rename>.
		771
		772	Non-zero flags are currently only supported on GNU/Linux systems that
		773	support renameat2. Other systems fail with C<ENOSYS> in this case.
		774
		775	The following constants are available (missing ones are, as usual C<0>),
		776	see renameat2(2) for details:
		777
		778	C<IO::AIO::RENAME_NOREPLACE>, C<IO::AIO::RENAME_EXCHANGE>
		779	and C<IO::AIO::RENAME_WHITEOUT>.
717		780
718		781
719	=item aio_mkdir $pathname, $mode, $callback->($status)	782	=item aio_mkdir $pathname, $mode, $callback->($status)
720		783
721	Asynchronously mkdir (create) a directory and call the callback with	784	Asynchronously mkdir (create) a directory and call the callback with
…		…
726	=item aio_rmdir $pathname, $callback->($status)	789	=item aio_rmdir $pathname, $callback->($status)
727		790
728	Asynchronously rmdir (delete) a directory and call the callback with the	791	Asynchronously rmdir (delete) a directory and call the callback with the
729	result code.	792	result code.
730		793
		794	On systems that support the AIO::WD working directory abstraction
		795	natively, the case C<[$wd, "."]> is specialcased - instead of failing,
		796	C<rmdir> is called on the absolute path of C<$wd>.
		797
731		798
732	=item aio_readdir $pathname, $callback->($entries)	799	=item aio_readdir $pathname, $callback->($entries)
733		800
734	Unlike the POSIX call of the same name, C<aio_readdir> reads an entire	801	Unlike the POSIX call of the same name, C<aio_readdir> reads an entire
735	directory (i.e. opendir + readdir + closedir). The entries will not be	802	directory (i.e. opendir + readdir + closedir). The entries will not be
…		…
750		817
751	=over 4	818	=over 4
752		819
753	=item IO::AIO::READDIR_DENTS	820	=item IO::AIO::READDIR_DENTS
754		821
755	When this flag is off, then the callback gets an arrayref consisting of	822	Normally the callback gets an arrayref consisting of names only (as
756	names only (as with C<aio_readdir>), otherwise it gets an arrayref with	823	with C<aio_readdir>). If this flag is set, then the callback gets an
757	C<[$name, $type, $inode]> arrayrefs, each describing a single directory	824	arrayref with C<[$name, $type, $inode]> arrayrefs, each describing a
758	entry in more detail.	825	single directory entry in more detail:
759		826
760	C<$name> is the name of the entry.	827	C<$name> is the name of the entry.
761		828
762	C<$type> is one of the C<IO::AIO::DT_xxx> constants:	829	C<$type> is one of the C<IO::AIO::DT_xxx> constants:
763		830
764	C<IO::AIO::DT_UNKNOWN>, C<IO::AIO::DT_FIFO>, C<IO::AIO::DT_CHR>, C<IO::AIO::DT_DIR>,	831	C<IO::AIO::DT_UNKNOWN>, C<IO::AIO::DT_FIFO>, C<IO::AIO::DT_CHR>, C<IO::AIO::DT_DIR>,
765	C<IO::AIO::DT_BLK>, C<IO::AIO::DT_REG>, C<IO::AIO::DT_LNK>, C<IO::AIO::DT_SOCK>,	832	C<IO::AIO::DT_BLK>, C<IO::AIO::DT_REG>, C<IO::AIO::DT_LNK>, C<IO::AIO::DT_SOCK>,
766	C<IO::AIO::DT_WHT>.	833	C<IO::AIO::DT_WHT>.
767		834
768	C<IO::AIO::DT_UNKNOWN> means just that: readdir does not know. If you need to	835	C<IO::AIO::DT_UNKNOWN> means just that: readdir does not know. If you need
769	know, you have to run stat yourself. Also, for speed reasons, the C<$type>	836	to know, you have to run stat yourself. Also, for speed/memory reasons,
770	scalars are read-only: you can not modify them.	837	the C<$type> scalars are read-only: you must not modify them.
771		838
772	C<$inode> is the inode number (which might not be exact on systems with 64	839	C<$inode> is the inode number (which might not be exact on systems with 64
773	bit inode numbers and 32 bit perls). This field has unspecified content on	840	bit inode numbers and 32 bit perls). This field has unspecified content on
774	systems that do not deliver the inode information.	841	systems that do not deliver the inode information.
775		842
…		…
786	short names are tried first.	853	short names are tried first.
787		854
788	=item IO::AIO::READDIR_STAT_ORDER	855	=item IO::AIO::READDIR_STAT_ORDER
789		856
790	When this flag is set, then the names will be returned in an order	857	When this flag is set, then the names will be returned in an order
791	suitable for stat()'ing each one. That is, when you plan to stat()	858	suitable for stat()'ing each one. That is, when you plan to stat() most or
792	all files in the given directory, then the returned order will likely	859	all files in the given directory, then the returned order will likely be
793	be fastest.	860	faster.
794		861
795	If both this flag and C<IO::AIO::READDIR_DIRS_FIRST> are specified, then	862	If both this flag and C<IO::AIO::READDIR_DIRS_FIRST> are specified,
796	the likely dirs come first, resulting in a less optimal stat order.	863	then the likely dirs come first, resulting in a less optimal stat order
		864	for stat'ing all entries, but likely a more optimal order for finding
		865	subdirectories.
797		866
798	=item IO::AIO::READDIR_FOUND_UNKNOWN	867	=item IO::AIO::READDIR_FOUND_UNKNOWN
799		868
800	This flag should not be set when calling C<aio_readdirx>. Instead, it	869	This flag should not be set when calling C<aio_readdirx>. Instead, it
801	is being set by C<aio_readdirx>, when any of the C<$type>'s found were	870	is being set by C<aio_readdirx>, when any of the C<$type>'s found were
…		…
803	C<$type>'s are known, which can be used to speed up some algorithms.	872	C<$type>'s are known, which can be used to speed up some algorithms.
804		873
805	=back	874	=back
806		875
807		876
		877	=item aio_slurp $pathname, $offset, $length, $data, $callback->($status)
		878
		879	Opens, reads and closes the given file. The data is put into C<$data>,
		880	which is resized as required.
		881
		882	If C<$offset> is negative, then it is counted from the end of the file.
		883
		884	If C<$length> is zero, then the remaining length of the file is
		885	used. Also, in this case, the same limitations to modifying C<$data> apply
		886	as when IO::AIO::mmap is used, i.e. it must only be modified in-place
		887	with C<substr>. If the size of the file is known, specifying a non-zero
		888	C<$length> results in a performance advantage.
		889
		890	This request is similar to the older C<aio_load> request, but since it is
		891	a single request, it might be more efficient to use.
		892
		893	Example: load F</etc/passwd> into C<$passwd>.
		894
		895	my $passwd;
		896	aio_slurp "/etc/passwd", 0, 0, $passwd, sub {
		897	$_[0] >= 0
		898	or die "/etc/passwd: $!\n";
		899
		900	printf "/etc/passwd is %d bytes long, and contains:\n", length $passwd;
		901	print $passwd;
		902	};
		903	IO::AIO::flush;
		904
		905
808	=item aio_load $pathname, $data, $callback->($status)	906	=item aio_load $pathname, $data, $callback->($status)
809		907
810	This is a composite request that tries to fully load the given file into	908	This is a composite request that tries to fully load the given file into
811	memory. Status is the same as with aio_read.	909	memory. Status is the same as with aio_read.
		910
		911	Using C<aio_slurp> might be more efficient, as it is a single request.
812		912
813	=cut	913	=cut
814		914
815	sub aio_load($$;$) {	915	sub aio_load($$;$) {
816	my ($path, undef, $cb) = @_;	916	my ($path, undef, $cb) = @_;
…		…
836	=item aio_copy $srcpath, $dstpath, $callback->($status)	936	=item aio_copy $srcpath, $dstpath, $callback->($status)
837		937
838	Try to copy the I<file> (directories not supported as either source or	938	Try to copy the I<file> (directories not supported as either source or
839	destination) from C<$srcpath> to C<$dstpath> and call the callback with	939	destination) from C<$srcpath> to C<$dstpath> and call the callback with
840	a status of C<0> (ok) or C<-1> (error, see C<$!>).	940	a status of C<0> (ok) or C<-1> (error, see C<$!>).
		941
		942	Existing destination files will be truncated.
841		943
842	This is a composite request that creates the destination file with	944	This is a composite request that creates the destination file with
843	mode 0200 and copies the contents of the source file into it using	945	mode 0200 and copies the contents of the source file into it using
844	C<aio_sendfile>, followed by restoring atime, mtime, access mode and	946	C<aio_sendfile>, followed by restoring atime, mtime, access mode and
845	uid/gid, in that order.	947	uid/gid, in that order.
…		…
955	Scans a directory (similar to C<aio_readdir>) but additionally tries to	1057	Scans a directory (similar to C<aio_readdir>) but additionally tries to
956	efficiently separate the entries of directory C<$path> into two sets of	1058	efficiently separate the entries of directory C<$path> into two sets of
957	names, directories you can recurse into (directories), and ones you cannot	1059	names, directories you can recurse into (directories), and ones you cannot
958	recurse into (everything else, including symlinks to directories).	1060	recurse into (everything else, including symlinks to directories).
959		1061
960	C<aio_scandir> is a composite request that creates of many sub requests_	1062	C<aio_scandir> is a composite request that generates many sub requests.
961	C<$maxreq> specifies the maximum number of outstanding aio requests that	1063	C<$maxreq> specifies the maximum number of outstanding aio requests that
962	this function generates. If it is C<< <= 0 >>, then a suitable default	1064	this function generates. If it is C<< <= 0 >>, then a suitable default
963	will be chosen (currently 4).	1065	will be chosen (currently 4).
964		1066
965	On error, the callback is called without arguments, otherwise it receives	1067	On error, the callback is called without arguments, otherwise it receives
…		…
1029	aioreq_pri $pri;	1131	aioreq_pri $pri;
1030	add $grp aio_stat $wd, sub {	1132	add $grp aio_stat $wd, sub {
1031	return $grp->result () if $_[0];	1133	return $grp->result () if $_[0];
1032	my $now = time;	1134	my $now = time;
1033	my $hash1 = join ":", (stat _)[0,1,3,7,9];	1135	my $hash1 = join ":", (stat _)[0,1,3,7,9];
		1136	my $rdxflags = READDIR_DIRS_FIRST;
		1137
		1138	if ((stat _)[3] < 2) {
		1139	# at least one non-POSIX filesystem exists
		1140	# that returns useful DT_type values: btrfs,
		1141	# so optimise for this here by requesting dents
		1142	$rdxflags \|= READDIR_DENTS;
		1143	}
1034		1144
1035	# read the directory entries	1145	# read the directory entries
1036	aioreq_pri $pri;	1146	aioreq_pri $pri;
1037	add $grp aio_readdirx $wd, READDIR_DIRS_FIRST, sub {	1147	add $grp aio_readdirx $wd, $rdxflags, sub {
1038	my $entries = shift	1148	my ($entries, $flags) = @_
1039	or return $grp->result ();	1149	or return $grp->result ();
		1150
		1151	if ($rdxflags & READDIR_DENTS) {
		1152	# if we requested type values, see if we can use them directly.
		1153
		1154	# if there were any DT_UNKNOWN entries then we assume we
		1155	# don't know. alternatively, we could assume that if we get
		1156	# one DT_DIR, then all directories are indeed marked with
		1157	# DT_DIR, but this seems not required for btrfs, and this
		1158	# is basically the "btrfs can't get it's act together" code
		1159	# branch.
		1160	unless ($flags & READDIR_FOUND_UNKNOWN) {
		1161	# now we have valid DT_ information for all entries,
		1162	# so use it as an optimisation without further stat's.
		1163	# they must also all be at the beginning of @$entries
		1164	# by now.
		1165
		1166	my $dirs;
		1167
		1168	if (@$entries) {
		1169	for (0 .. $#$entries) {
		1170	if ($entries->[$_][1] != DT_DIR) {
		1171	# splice out directories
		1172	$dirs = [splice @$entries, 0, $_];
		1173	last;
		1174	}
		1175	}
		1176
		1177	# if we didn't find any non-dir, then all entries are dirs
		1178	unless ($dirs) {
		1179	($dirs, $entries) = ($entries, []);
		1180	}
		1181	} else {
		1182	# directory is empty, so there are no sbdirs
		1183	$dirs = [];
		1184	}
		1185
		1186	# either splice'd the directories out or the dir was empty.
		1187	# convert dents to filenames
		1188	$_ = $_->[0] for @$dirs;
		1189	$_ = $_->[0] for @$entries;
		1190
		1191	return $grp->result ($dirs, $entries);
		1192	}
		1193
		1194	# cannot use, so return to our old ways
		1195	# by pretending we only scanned for names.
		1196	$_ = $_->[0] for @$entries;
		1197	}
1040		1198
1041	# stat the dir another time	1199	# stat the dir another time
1042	aioreq_pri $pri;	1200	aioreq_pri $pri;
1043	add $grp aio_stat $wd, sub {	1201	add $grp aio_stat $wd, sub {
1044	my $hash2 = join ":", (stat _)[0,1,3,7,9];	1202	my $hash2 = join ":", (stat _)[0,1,3,7,9];
…		…
1099	}	1257	}
1100		1258
1101	=item aio_rmtree $pathname, $callback->($status)	1259	=item aio_rmtree $pathname, $callback->($status)
1102		1260
1103	Delete a directory tree starting (and including) C<$path>, return the	1261	Delete a directory tree starting (and including) C<$path>, return the
1104	status of the final C<rmdir> only. This is a composite request that	1262	status of the final C<rmdir> only. This is a composite request that
1105	uses C<aio_scandir> to recurse into and rmdir directories, and unlink	1263	uses C<aio_scandir> to recurse into and rmdir directories, and unlink
1106	everything else.	1264	everything else.
1107		1265
1108	=cut	1266	=cut
1109		1267
…		…
1130	add $grp $dirgrp;	1288	add $grp $dirgrp;
1131	};	1289	};
1132		1290
1133	$grp	1291	$grp
1134	}	1292	}
		1293
		1294	=item aio_fcntl $fh, $cmd, $arg, $callback->($status)
		1295
		1296	=item aio_ioctl $fh, $request, $buf, $callback->($status)
		1297
		1298	These work just like the C<fcntl> and C<ioctl> built-in functions, except
		1299	they execute asynchronously and pass the return value to the callback.
		1300
		1301	Both calls can be used for a lot of things, some of which make more sense
		1302	to run asynchronously in their own thread, while some others make less
		1303	sense. For example, calls that block waiting for external events, such
		1304	as locking, will also lock down an I/O thread while it is waiting, which
		1305	can deadlock the whole I/O system. At the same time, there might be no
		1306	alternative to using a thread to wait.
		1307
		1308	So in general, you should only use these calls for things that do
		1309	(filesystem) I/O, not for things that wait for other events (network,
		1310	other processes), although if you are careful and know what you are doing,
		1311	you still can.
		1312
		1313	The following constants are available and can be used for normal C<ioctl>
		1314	and C<fcntl> as well (missing ones are, as usual C<0>):
		1315
		1316	C<F_DUPFD_CLOEXEC>,
		1317
		1318	C<F_OFD_GETLK>, C<F_OFD_SETLK>, C<F_OFD_GETLKW>,
		1319
		1320	C<FIFREEZE>, C<FITHAW>, C<FITRIM>, C<FICLONE>, C<FICLONERANGE>, C<FIDEDUPERANGE>.
		1321
		1322	C<F_ADD_SEALS>, C<F_GET_SEALS>, C<F_SEAL_SEAL>, C<F_SEAL_SHRINK>, C<F_SEAL_GROW> and
		1323	C<F_SEAL_WRITE>.
		1324
		1325	C<FS_IOC_GETFLAGS>, C<FS_IOC_SETFLAGS>, C<FS_IOC_GETVERSION>, C<FS_IOC_SETVERSION>,
		1326	C<FS_IOC_FIEMAP>.
		1327
		1328	C<FS_IOC_FSGETXATTR>, C<FS_IOC_FSSETXATTR>, C<FS_IOC_SET_ENCRYPTION_POLICY>,
		1329	C<FS_IOC_GET_ENCRYPTION_PWSALT>, C<FS_IOC_GET_ENCRYPTION_POLICY>, C<FS_KEY_DESCRIPTOR_SIZE>.
		1330
		1331	C<FS_SECRM_FL>, C<FS_UNRM_FL>, C<FS_COMPR_FL>, C<FS_SYNC_FL>, C<FS_IMMUTABLE_FL>,
		1332	C<FS_APPEND_FL>, C<FS_NODUMP_FL>, C<FS_NOATIME_FL>, C<FS_DIRTY_FL>,
		1333	C<FS_COMPRBLK_FL>, C<FS_NOCOMP_FL>, C<FS_ENCRYPT_FL>, C<FS_BTREE_FL>,
		1334	C<FS_INDEX_FL>, C<FS_JOURNAL_DATA_FL>, C<FS_NOTAIL_FL>, C<FS_DIRSYNC_FL>, C<FS_TOPDIR_FL>,
		1335	C<FS_FL_USER_MODIFIABLE>.
		1336
		1337	C<FS_XFLAG_REALTIME>, C<FS_XFLAG_PREALLOC>, C<FS_XFLAG_IMMUTABLE>, C<FS_XFLAG_APPEND>,
		1338	C<FS_XFLAG_SYNC>, C<FS_XFLAG_NOATIME>, C<FS_XFLAG_NODUMP>, C<FS_XFLAG_RTINHERIT>,
		1339	C<FS_XFLAG_PROJINHERIT>, C<FS_XFLAG_NOSYMLINKS>, C<FS_XFLAG_EXTSIZE>, C<FS_XFLAG_EXTSZINHERIT>,
		1340	C<FS_XFLAG_NODEFRAG>, C<FS_XFLAG_FILESTREAM>, C<FS_XFLAG_DAX>, C<FS_XFLAG_HASATTR>,
1135		1341
1136	=item aio_sync $callback->($status)	1342	=item aio_sync $callback->($status)
1137		1343
1138	Asynchronously call sync and call the callback when finished.	1344	Asynchronously call sync and call the callback when finished.
1139		1345
…		…
1208	};	1414	};
1209		1415
1210	$grp	1416	$grp
1211	}	1417	}
1212		1418
1213	=item aio_msync $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)	1419	=item aio_msync $scalar, $offset = 0, $length = undef, flags = MS_SYNC, $callback->($status)
1214		1420
1215	This is a rather advanced IO::AIO call, which only works on mmap(2)ed	1421	This is a rather advanced IO::AIO call, which only works on mmap(2)ed
1216	scalars (see the C<IO::AIO::mmap> function, although it also works on data	1422	scalars (see the C<IO::AIO::mmap> function, although it also works on data
1217	scalars managed by the L<Sys::Mmap> or L<Mmap> modules, note that the	1423	scalars managed by the L<Sys::Mmap> or L<Mmap> modules, note that the
1218	scalar must only be modified in-place while an aio operation is pending on	1424	scalar must only be modified in-place while an aio operation is pending on
…		…
1220		1426
1221	It calls the C<msync> function of your OS, if available, with the memory	1427	It calls the C<msync> function of your OS, if available, with the memory
1222	area starting at C<$offset> in the string and ending C<$length> bytes	1428	area starting at C<$offset> in the string and ending C<$length> bytes
1223	later. If C<$length> is negative, counts from the end, and if C<$length>	1429	later. If C<$length> is negative, counts from the end, and if C<$length>
1224	is C<undef>, then it goes till the end of the string. The flags can be	1430	is C<undef>, then it goes till the end of the string. The flags can be
1225	a combination of C<IO::AIO::MS_ASYNC>, C<IO::AIO::MS_INVALIDATE> and	1431	either C<IO::AIO::MS_ASYNC> or C<IO::AIO::MS_SYNC>, plus an optional
1226	C<IO::AIO::MS_SYNC>.	1432	C<IO::AIO::MS_INVALIDATE>.
1227		1433
1228	=item aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)	1434	=item aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
1229		1435
1230	This is a rather advanced IO::AIO call, which works best on mmap(2)ed	1436	This is a rather advanced IO::AIO call, which works best on mmap(2)ed
1231	scalars.	1437	scalars.
1232		1438
1233	It touches (reads or writes) all memory pages in the specified	1439	It touches (reads or writes) all memory pages in the specified
1234	range inside the scalar. All caveats and parameters are the same	1440	range inside the scalar. All caveats and parameters are the same
1235	as for C<aio_msync>, above, except for flags, which must be either	1441	as for C<aio_msync>, above, except for flags, which must be either
1236	C<0> (which reads all pages and ensures they are instantiated) or	1442	C<0> (which reads all pages and ensures they are instantiated) or
1237	C<IO::AIO::MT_MODIFY>, which modifies the memory page s(by reading and	1443	C<IO::AIO::MT_MODIFY>, which modifies the memory pages (by reading and
1238	writing an octet from it, which dirties the page).	1444	writing an octet from it, which dirties the page).
1239		1445
1240	=item aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)	1446	=item aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
1241		1447
1242	This is a rather advanced IO::AIO call, which works best on mmap(2)ed	1448	This is a rather advanced IO::AIO call, which works best on mmap(2)ed
…		…
1261	IO::AIO::mmap $data, -s $fh, IO::AIO::PROT_READ, IO::AIO::MAP_SHARED, $fh;	1467	IO::AIO::mmap $data, -s $fh, IO::AIO::PROT_READ, IO::AIO::MAP_SHARED, $fh;
1262	aio_mlock $data; # mlock in background	1468	aio_mlock $data; # mlock in background
1263		1469
1264	=item aio_mlockall $flags, $callback->($status)	1470	=item aio_mlockall $flags, $callback->($status)
1265		1471
1266	Calls the C<mlockall> function with the given C<$flags> (a combination of	1472	Calls the C<mlockall> function with the given C<$flags> (a
1267	C<IO::AIO::MCL_CURRENT> and C<IO::AIO::MCL_FUTURE>).	1473	combination of C<IO::AIO::MCL_CURRENT>, C<IO::AIO::MCL_FUTURE> and
		1474	C<IO::AIO::MCL_ONFAULT>).
1268		1475
1269	On systems that do not implement C<mlockall>, this function returns C<-1>	1476	On systems that do not implement C<mlockall>, this function returns C<-1>
1270	and sets errno to C<ENOSYS>.	1477	and sets errno to C<ENOSYS>. Similarly, flag combinations not supported
		1478	by the system result in a return value of C<-1> with errno being set to
		1479	C<EINVAL>.
1271		1480
1272	Note that the corresponding C<munlockall> is synchronous and is	1481	Note that the corresponding C<munlockall> is synchronous and is
1273	documented under L<MISCELLANEOUS FUNCTIONS>.	1482	documented under L<MISCELLANEOUS FUNCTIONS>.
1274		1483
1275	Example: asynchronously lock all current and future pages into memory.	1484	Example: asynchronously lock all current and future pages into memory.
1276		1485
1277	aio_mlockall IO::AIO::MCL_FUTURE;	1486	aio_mlockall IO::AIO::MCL_FUTURE;
1278		1487
1279	=item aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)	1488	=item aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)
1280		1489
1281	Queries the extents of the given file (by calling the Linux FIEMAP ioctl,	1490	Queries the extents of the given file (by calling the Linux C<FIEMAP>
1282	see L<http://cvs.schmorp.de/IO-AIO/doc/fiemap.txt> for details). If the	1491	ioctl, see L<http://cvs.schmorp.de/IO-AIO/doc/fiemap.txt> for details). If
1283	C<ioctl> is not available on your OS, then this rquiest will fail with	1492	the ioctl is not available on your OS, then this request will fail with
1284	C<ENOSYS>.	1493	C<ENOSYS>.
1285		1494
1286	C<$start> is the starting offset to query extents for, C<$length> is the	1495	C<$start> is the starting offset to query extents for, C<$length> is the
1287	size of the range to query - if it is C<undef>, then the whole file will	1496	size of the range to query - if it is C<undef>, then the whole file will
1288	be queried.	1497	be queried.
…		…
1291	C<IO::AIO::FIEMAP_FLAG_XATTR> - C<IO::AIO::FIEMAP_FLAGS_COMPAT> is also	1500	C<IO::AIO::FIEMAP_FLAG_XATTR> - C<IO::AIO::FIEMAP_FLAGS_COMPAT> is also
1292	exported), and is normally C<0> or C<IO::AIO::FIEMAP_FLAG_SYNC> to query	1501	exported), and is normally C<0> or C<IO::AIO::FIEMAP_FLAG_SYNC> to query
1293	the data portion.	1502	the data portion.
1294		1503
1295	C<$count> is the maximum number of extent records to return. If it is	1504	C<$count> is the maximum number of extent records to return. If it is
1296	C<undef>, then IO::AIO queries all extents of the file. As a very special	1505	C<undef>, then IO::AIO queries all extents of the range. As a very special
1297	case, if it is C<0>, then the callback receives the number of extents	1506	case, if it is C<0>, then the callback receives the number of extents
1298	instead of the extents themselves.	1507	instead of the extents themselves (which is unreliable, see below).
1299		1508
1300	If an error occurs, the callback receives no arguments. The special	1509	If an error occurs, the callback receives no arguments. The special
1301	C<errno> value C<IO::AIO::EBADR> is available to test for flag errors.	1510	C<errno> value C<IO::AIO::EBADR> is available to test for flag errors.
1302		1511
1303	Otherwise, the callback receives an array reference with extent	1512	Otherwise, the callback receives an array reference with extent
…		…
1305	following members:	1514	following members:
1306		1515
1307	[$logical, $physical, $length, $flags]	1516	[$logical, $physical, $length, $flags]
1308		1517
1309	Flags is any combination of the following flag values (typically either C<0>	1518	Flags is any combination of the following flag values (typically either C<0>
1310	or C<IO::AIO::FIEMAP_EXTENT_LAST>):	1519	or C<IO::AIO::FIEMAP_EXTENT_LAST> (1)):
1311		1520
1312	C<IO::AIO::FIEMAP_EXTENT_LAST>, C<IO::AIO::FIEMAP_EXTENT_UNKNOWN>,	1521	C<IO::AIO::FIEMAP_EXTENT_LAST>, C<IO::AIO::FIEMAP_EXTENT_UNKNOWN>,
1313	C<IO::AIO::FIEMAP_EXTENT_DELALLOC>, C<IO::AIO::FIEMAP_EXTENT_ENCODED>,	1522	C<IO::AIO::FIEMAP_EXTENT_DELALLOC>, C<IO::AIO::FIEMAP_EXTENT_ENCODED>,
1314	C<IO::AIO::FIEMAP_EXTENT_DATA_ENCRYPTED>, C<IO::AIO::FIEMAP_EXTENT_NOT_ALIGNED>,	1523	C<IO::AIO::FIEMAP_EXTENT_DATA_ENCRYPTED>, C<IO::AIO::FIEMAP_EXTENT_NOT_ALIGNED>,
1315	C<IO::AIO::FIEMAP_EXTENT_DATA_INLINE>, C<IO::AIO::FIEMAP_EXTENT_DATA_TAIL>,	1524	C<IO::AIO::FIEMAP_EXTENT_DATA_INLINE>, C<IO::AIO::FIEMAP_EXTENT_DATA_TAIL>,
1316	C<IO::AIO::FIEMAP_EXTENT_UNWRITTEN>, C<IO::AIO::FIEMAP_EXTENT_MERGED> or	1525	C<IO::AIO::FIEMAP_EXTENT_UNWRITTEN>, C<IO::AIO::FIEMAP_EXTENT_MERGED> or
1317	C<IO::AIO::FIEMAP_EXTENT_SHARED>.	1526	C<IO::AIO::FIEMAP_EXTENT_SHARED>.
1318		1527
		1528	At the time of this writing (Linux 3.2), this request is unreliable unless
		1529	C<$count> is C<undef>, as the kernel has all sorts of bugs preventing
		1530	it to return all extents of a range for files with a large number of
		1531	extents. The code (only) works around all these issues if C<$count> is
		1532	C<undef>.
		1533
1319	=item aio_group $callback->(...)	1534	=item aio_group $callback->(...)
1320		1535
1321	This is a very special aio request: Instead of doing something, it is a	1536	This is a very special aio request: Instead of doing something, it is a
1322	container for other aio requests, which is useful if you want to bundle	1537	container for other aio requests, which is useful if you want to bundle
1323	many requests into a single, composite, request with a definite callback	1538	many requests into a single, composite, request with a definite callback
…		…
1406	aio_stat [$etcdir, "passwd"], sub {	1621	aio_stat [$etcdir, "passwd"], sub {
1407	# yay	1622	# yay
1408	};	1623	};
1409	};	1624	};
1410		1625
1411	That C<aio_wd> is a request and not a normal function shows that creating	1626	The fact that C<aio_wd> is a request and not a normal function shows that
1412	an IO::AIO::WD object is itself a potentially blocking operation, which is	1627	creating an IO::AIO::WD object is itself a potentially blocking operation,
1413	why it is done asynchronously.	1628	which is why it is done asynchronously.
1414		1629
1415	To stat the directory obtained with C<aio_wd> above, one could write	1630	To stat the directory obtained with C<aio_wd> above, one could write
1416	either of the following three request calls:	1631	either of the following three request calls:
1417		1632
1418	aio_lstat "/etc" , sub { ... # pathname as normal string	1633	aio_lstat "/etc" , sub { ... # pathname as normal string
…		…
1435	There are some caveats: when directories get renamed (or deleted), the	1650	There are some caveats: when directories get renamed (or deleted), the
1436	pathname string doesn't change, so will point to the new directory (or	1651	pathname string doesn't change, so will point to the new directory (or
1437	nowhere at all), while the directory fd, if available on the system,	1652	nowhere at all), while the directory fd, if available on the system,
1438	will still point to the original directory. Most functions accepting a	1653	will still point to the original directory. Most functions accepting a
1439	pathname will use the directory fd on newer systems, and the string on	1654	pathname will use the directory fd on newer systems, and the string on
1440	older systems. Some functions (such as realpath) will always rely on the	1655	older systems. Some functions (such as C<aio_realpath>) will always rely on
1441	string form of the pathname.	1656	the string form of the pathname.
1442		1657
1443	So this fucntionality is mainly useful to get some protection against	1658	So this functionality is mainly useful to get some protection against
1444	C<chdir>, to easily get an absolute path out of a relative path for future	1659	C<chdir>, to easily get an absolute path out of a relative path for future
1445	reference, and to speed up doing many operations in the same directory	1660	reference, and to speed up doing many operations in the same directory
1446	(e.g. when stat'ing all files in a directory).	1661	(e.g. when stat'ing all files in a directory).
1447		1662
1448	The following functions implement this working directory abstraction:	1663	The following functions implement this working directory abstraction:
…		…
1461	passing C<undef> as working directory component of a pathname fails the	1676	passing C<undef> as working directory component of a pathname fails the
1462	request with C<ENOENT>, there is often no need for error checking in the	1677	request with C<ENOENT>, there is often no need for error checking in the
1463	C<aio_wd> callback, as future requests using the value will fail in the	1678	C<aio_wd> callback, as future requests using the value will fail in the
1464	expected way.	1679	expected way.
1465		1680
1466	If this call isn't available because your OS lacks it or it couldn't be
1467	detected, it will be emulated by calling C<fsync> instead.
1468
1469	=item IO::AIO::CWD	1681	=item IO::AIO::CWD
1470		1682
1471	This is a compiletime constant (object) that represents the process	1683	This is a compiletime constant (object) that represents the process
1472	current working directory.	1684	current working directory.
1473		1685
1474	Specifying this object as working directory object for a pathname is as	1686	Specifying this object as working directory object for a pathname is as if
1475	if the pathname would be specified directly, without a directory object,	1687	the pathname would be specified directly, without a directory object. For
1476	e.g., these calls are functionally identical:	1688	example, these calls are functionally identical:
1477		1689
1478	aio_stat "somefile", sub { ... };	1690	aio_stat "somefile", sub { ... };
1479	aio_stat [IO::AIO::CWD, "somefile"], sub { ... };	1691	aio_stat [IO::AIO::CWD, "somefile"], sub { ... };
1480		1692
1481	=back	1693	=back
1482		1694
		1695	To recover the path associated with an IO::AIO::WD object, you can use
		1696	C<aio_realpath>:
		1697
		1698	aio_realpath $wd, sub {
		1699	warn "path is $_[0]\n";
		1700	};
		1701
		1702	Currently, C<aio_statvfs> always, and C<aio_rename> and C<aio_rmdir>
		1703	sometimes, fall back to using an absolue path.
1483		1704
1484	=head2 IO::AIO::REQ CLASS	1705	=head2 IO::AIO::REQ CLASS
1485		1706
1486	All non-aggregate C<aio_*> functions return an object of this class when	1707	All non-aggregate C<aio_*> functions return an object of this class when
1487	called in non-void context.	1708	called in non-void context.
…		…
1648	The default value for the limit is C<0>, but note that setting a feeder	1869	The default value for the limit is C<0>, but note that setting a feeder
1649	automatically bumps it up to C<2>.	1870	automatically bumps it up to C<2>.
1650		1871
1651	=back	1872	=back
1652		1873
		1874
1653	=head2 SUPPORT FUNCTIONS	1875	=head2 SUPPORT FUNCTIONS
1654		1876
1655	=head3 EVENT PROCESSING AND EVENT LOOP INTEGRATION	1877	=head3 EVENT PROCESSING AND EVENT LOOP INTEGRATION
1656		1878
1657	=over 4	1879	=over 4
…		…
1665		1887
1666	See C<poll_cb> for an example.	1888	See C<poll_cb> for an example.
1667		1889
1668	=item IO::AIO::poll_cb	1890	=item IO::AIO::poll_cb
1669		1891
1670	Process some outstanding events on the result pipe. You have to call	1892	Process some requests that have reached the result phase (i.e. they have
		1893	been executed but the results are not yet reported). You have to call
		1894	this "regularly" to finish outstanding requests.
		1895
1671	this regularly. Returns C<0> if all events could be processed (or there	1896	Returns C<0> if all events could be processed (or there were no
1672	were no events to process), or C<-1> if it returned earlier for whatever	1897	events to process), or C<-1> if it returned earlier for whatever
1673	reason. Returns immediately when no events are outstanding. The amount of	1898	reason. Returns immediately when no events are outstanding. The amount
1674	events processed depends on the settings of C<IO::AIO::max_poll_req> and	1899	of events processed depends on the settings of C<IO::AIO::max_poll_req>,
1675	C<IO::AIO::max_poll_time>.	1900	C<IO::AIO::max_poll_time> and C<IO::AIO::max_outstanding>.
1676		1901
1677	If not all requests were processed for whatever reason, the filehandle	1902	If not all requests were processed for whatever reason, the poll file
1678	will still be ready when C<poll_cb> returns, so normally you don't have to	1903	descriptor will still be ready when C<poll_cb> returns, so normally you
1679	do anything special to have it called later.	1904	don't have to do anything special to have it called later.
1680		1905
1681	Apart from calling C<IO::AIO::poll_cb> when the event filehandle becomes	1906	Apart from calling C<IO::AIO::poll_cb> when the event filehandle becomes
1682	ready, it can be beneficial to call this function from loops which submit	1907	ready, it can be beneficial to call this function from loops which submit
1683	a lot of requests, to make sure the results get processed when they become	1908	a lot of requests, to make sure the results get processed when they become
1684	available and not just when the loop is finished and the event loop takes	1909	available and not just when the loop is finished and the event loop takes
…		…
1693	poll => 'r', async => 1,	1918	poll => 'r', async => 1,
1694	cb => \&IO::AIO::poll_cb);	1919	cb => \&IO::AIO::poll_cb);
1695		1920
1696	=item IO::AIO::poll_wait	1921	=item IO::AIO::poll_wait
1697		1922
1698	If there are any outstanding requests and none of them in the result	1923	Wait until either at least one request is in the result phase or no
1699	phase, wait till the result filehandle becomes ready for reading (simply	1924	requests are outstanding anymore.
1700	does a C<select> on the filehandle. This is useful if you want to	1925
1701	synchronously wait for some requests to finish).	1926	This is useful if you want to synchronously wait for some requests to
		1927	become ready, without actually handling them.
1702		1928
1703	See C<nreqs> for an example.	1929	See C<nreqs> for an example.
1704		1930
1705	=item IO::AIO::poll	1931	=item IO::AIO::poll
1706		1932
…		…
1717		1943
1718	Strictly equivalent to:	1944	Strictly equivalent to:
1719		1945
1720	IO::AIO::poll_wait, IO::AIO::poll_cb	1946	IO::AIO::poll_wait, IO::AIO::poll_cb
1721	while IO::AIO::nreqs;	1947	while IO::AIO::nreqs;
		1948
		1949	This function can be useful at program aborts, to make sure outstanding
		1950	I/O has been done (C<IO::AIO> uses an C<END> block which already calls
		1951	this function on normal exits), or when you are merely using C<IO::AIO>
		1952	for its more advanced functions, rather than for async I/O, e.g.:
		1953
		1954	my ($dirs, $nondirs);
		1955	IO::AIO::aio_scandir "/tmp", 0, sub { ($dirs, $nondirs) = @_ };
		1956	IO::AIO::flush;
		1957	# $dirs, $nondirs are now set
1722		1958
1723	=item IO::AIO::max_poll_reqs $nreqs	1959	=item IO::AIO::max_poll_reqs $nreqs
1724		1960
1725	=item IO::AIO::max_poll_time $seconds	1961	=item IO::AIO::max_poll_time $seconds
1726		1962
…		…
1753	poll => 'r', nice => 1,	1989	poll => 'r', nice => 1,
1754	cb => &IO::AIO::poll_cb);	1990	cb => &IO::AIO::poll_cb);
1755		1991
1756	=back	1992	=back
1757		1993
		1994
1758	=head3 CONTROLLING THE NUMBER OF THREADS	1995	=head3 CONTROLLING THE NUMBER OF THREADS
1759		1996
1760	=over	1997	=over
1761		1998
1762	=item IO::AIO::min_parallel $nthreads	1999	=item IO::AIO::min_parallel $nthreads
…		…
1827		2064
1828	This is a very bad function to use in interactive programs because it	2065	This is a very bad function to use in interactive programs because it
1829	blocks, and a bad way to reduce concurrency because it is inexact: Better	2066	blocks, and a bad way to reduce concurrency because it is inexact: Better
1830	use an C<aio_group> together with a feed callback.	2067	use an C<aio_group> together with a feed callback.
1831		2068
1832	It's main use is in scripts without an event loop - when you want to stat	2069	Its main use is in scripts without an event loop - when you want to stat
1833	a lot of files, you can write somehting like this:	2070	a lot of files, you can write something like this:
1834		2071
1835	IO::AIO::max_outstanding 32;	2072	IO::AIO::max_outstanding 32;
1836		2073
1837	for my $path (...) {	2074	for my $path (...) {
1838	aio_stat $path , ...;	2075	aio_stat $path , ...;
…		…
1849	The default value for C<max_outstanding> is very large, so there is no	2086	The default value for C<max_outstanding> is very large, so there is no
1850	practical limit on the number of outstanding requests.	2087	practical limit on the number of outstanding requests.
1851		2088
1852	=back	2089	=back
1853		2090
		2091
1854	=head3 STATISTICAL INFORMATION	2092	=head3 STATISTICAL INFORMATION
1855		2093
1856	=over	2094	=over
1857		2095
1858	=item IO::AIO::nreqs	2096	=item IO::AIO::nreqs
…		…
1875	Returns the number of requests currently in the pending state (executed,	2113	Returns the number of requests currently in the pending state (executed,
1876	but not yet processed by poll_cb).	2114	but not yet processed by poll_cb).
1877		2115
1878	=back	2116	=back
1879		2117
		2118
		2119	=head3 SUBSECOND STAT TIME ACCESS
		2120
		2121	Both C<aio_stat>/C<aio_lstat> and perl's C<stat>/C<lstat> functions can
		2122	generally find access/modification and change times with subsecond time
		2123	accuracy of the system supports it, but perl's built-in functions only
		2124	return the integer part.
		2125
		2126	The following functions return the timestamps of the most recent
		2127	stat with subsecond precision on most systems and work both after
		2128	C<aio_stat>/C<aio_lstat> and perl's C<stat>/C<lstat> calls. Their return
		2129	value is only meaningful after a successful C<stat>/C<lstat> call, or
		2130	during/after a successful C<aio_stat>/C<aio_lstat> callback.
		2131
		2132	This is similar to the L<Time::HiRes> C<stat> functions, but can return
		2133	full resolution without rounding and work with standard perl C<stat>,
		2134	alleviating the need to call the special C<Time::HiRes> functions, which
		2135	do not act like their perl counterparts.
		2136
		2137	On operating systems or file systems where subsecond time resolution is
		2138	not supported or could not be detected, a fractional part of C<0> is
		2139	returned, so it is always safe to call these functions.
		2140
		2141	=over 4
		2142
		2143	=item $seconds = IO::AIO::st_atime, IO::AIO::st_mtime, IO::AIO::st_ctime, IO::AIO::st_btime
		2144
		2145	Return the access, modication, change or birth time, respectively,
		2146	including fractional part. Due to the limited precision of floating point,
		2147	the accuracy on most platforms is only a bit better than milliseconds
		2148	for times around now - see the I<nsec> function family, below, for full
		2149	accuracy.
		2150
		2151	File birth time is only available when the OS and perl support it (on
		2152	FreeBSD and NetBSD at the time of this writing, although support is
		2153	adaptive, so if your OS/perl gains support, IO::AIO can take advantage of
		2154	it). On systems where it isn't available, C<0> is currently returned, but
		2155	this might change to C<undef> in a future version.
		2156
		2157	=item ($atime, $mtime, $ctime, $btime, ...) = IO::AIO::st_xtime
		2158
		2159	Returns access, modification, change and birth time all in one go, and
		2160	maybe more times in the future version.
		2161
		2162	=item $nanoseconds = IO::AIO::st_atimensec, IO::AIO::st_mtimensec, IO::AIO::st_ctimensec, IO::AIO::st_btimensec
		2163
		2164	Return the fractional access, modifcation, change or birth time, in nanoseconds,
		2165	as an integer in the range C<0> to C<999999999>.
		2166
		2167	Note that no accessors are provided for access, modification and
		2168	change times - you need to get those from C<stat _> if required (C<int
		2169	IO::AIO::st_atime> and so on will I<not> generally give you the correct
		2170	value).
		2171
		2172	=item $seconds = IO::AIO::st_btimesec
		2173
		2174	The (integral) seconds part of the file birth time, if available.
		2175
		2176	=item ($atime, $mtime, $ctime, $btime, ...) = IO::AIO::st_xtimensec
		2177
		2178	Like the functions above, but returns all four times in one go (and maybe
		2179	more in future versions).
		2180
		2181	=item $counter = IO::AIO::st_gen
		2182
		2183	Returns the generation counter (in practice this is just a random number)
		2184	of the file. This is only available on platforms which have this member in
		2185	their C<struct stat> (most BSDs at the time of this writing) and generally
		2186	only to the root usert. If unsupported, C<0> is returned, but this might
		2187	change to C<undef> in a future version.
		2188
		2189	=back
		2190
		2191	Example: print the high resolution modification time of F</etc>, using
		2192	C<stat>, and C<IO::AIO::aio_stat>.
		2193
		2194	if (stat "/etc") {
		2195	printf "stat(/etc) mtime: %f\n", IO::AIO::st_mtime;
		2196	}
		2197
		2198	IO::AIO::aio_stat "/etc", sub {
		2199	$_[0]
		2200	and return;
		2201
		2202	printf "aio_stat(/etc) mtime: %d.%09d\n", (stat _)[9], IO::AIO::st_mtimensec;
		2203	};
		2204
		2205	IO::AIO::flush;
		2206
		2207	Output of the awbove on my system, showing reduced and full accuracy:
		2208
		2209	stat(/etc) mtime: 1534043702.020808
		2210	aio_stat(/etc) mtime: 1534043702.020807792
		2211
		2212
1880	=head3 MISCELLANEOUS FUNCTIONS	2213	=head3 MISCELLANEOUS FUNCTIONS
1881		2214
1882	IO::AIO implements some functions that might be useful, but are not	2215	IO::AIO implements some functions that are useful when you want to use
1883	asynchronous.	2216	some "Advanced I/O" function not available to in Perl, without going the
		2217	"Asynchronous I/O" route. Many of these have an asynchronous C<aio_*>
		2218	counterpart.
1884		2219
1885	=over 4	2220	=over 4
		2221
		2222	=item $numfd = IO::AIO::get_fdlimit
		2223
		2224	This function is I<EXPERIMENTAL> and subject to change.
		2225
		2226	Tries to find the current file descriptor limit and returns it, or
		2227	C<undef> and sets C<$!> in case of an error. The limit is one larger than
		2228	the highest valid file descriptor number.
		2229
		2230	=item IO::AIO::min_fdlimit [$numfd]
		2231
		2232	This function is I<EXPERIMENTAL> and subject to change.
		2233
		2234	Try to increase the current file descriptor limit(s) to at least C<$numfd>
		2235	by changing the soft or hard file descriptor resource limit. If C<$numfd>
		2236	is missing, it will try to set a very high limit, although this is not
		2237	recommended when you know the actual minimum that you require.
		2238
		2239	If the limit cannot be raised enough, the function makes a best-effort
		2240	attempt to increase the limit as much as possible, using various
		2241	tricks, while still failing. You can query the resulting limit using
		2242	C<IO::AIO::get_fdlimit>.
		2243
		2244	If an error occurs, returns C<undef> and sets C<$!>, otherwise returns
		2245	true.
1886		2246
1887	=item IO::AIO::sendfile $ofh, $ifh, $offset, $count	2247	=item IO::AIO::sendfile $ofh, $ifh, $offset, $count
1888		2248
1889	Calls the C<eio_sendfile_sync> function, which is like C<aio_sendfile>,	2249	Calls the C<eio_sendfile_sync> function, which is like C<aio_sendfile>,
1890	but is blocking (this makes most sense if you know the input data is	2250	but is blocking (this makes most sense if you know the input data is
…		…
1907	=item IO::AIO::madvise $scalar, $offset, $len, $advice	2267	=item IO::AIO::madvise $scalar, $offset, $len, $advice
1908		2268
1909	Simply calls the C<posix_madvise> function (see its	2269	Simply calls the C<posix_madvise> function (see its
1910	manpage for details). The following advice constants are	2270	manpage for details). The following advice constants are
1911	available: C<IO::AIO::MADV_NORMAL>, C<IO::AIO::MADV_SEQUENTIAL>,	2271	available: C<IO::AIO::MADV_NORMAL>, C<IO::AIO::MADV_SEQUENTIAL>,
1912	C<IO::AIO::MADV_RANDOM>, C<IO::AIO::MADV_WILLNEED>, C<IO::AIO::MADV_DONTNEED>.	2272	C<IO::AIO::MADV_RANDOM>, C<IO::AIO::MADV_WILLNEED>,
		2273	C<IO::AIO::MADV_DONTNEED>.
		2274
		2275	If C<$offset> is negative, counts from the end. If C<$length> is negative,
		2276	the remaining length of the C<$scalar> is used. If possible, C<$length>
		2277	will be reduced to fit into the C<$scalar>.
1913		2278
1914	On systems that do not implement C<posix_madvise>, this function returns	2279	On systems that do not implement C<posix_madvise>, this function returns
1915	ENOSYS, otherwise the return value of C<posix_madvise>.	2280	ENOSYS, otherwise the return value of C<posix_madvise>.
1916		2281
1917	=item IO::AIO::mprotect $scalar, $offset, $len, $protect	2282	=item IO::AIO::mprotect $scalar, $offset, $len, $protect
…		…
1919	Simply calls the C<mprotect> function on the preferably AIO::mmap'ed	2284	Simply calls the C<mprotect> function on the preferably AIO::mmap'ed
1920	$scalar (see its manpage for details). The following protect	2285	$scalar (see its manpage for details). The following protect
1921	constants are available: C<IO::AIO::PROT_NONE>, C<IO::AIO::PROT_READ>,	2286	constants are available: C<IO::AIO::PROT_NONE>, C<IO::AIO::PROT_READ>,
1922	C<IO::AIO::PROT_WRITE>, C<IO::AIO::PROT_EXEC>.	2287	C<IO::AIO::PROT_WRITE>, C<IO::AIO::PROT_EXEC>.
1923		2288
		2289	If C<$offset> is negative, counts from the end. If C<$length> is negative,
		2290	the remaining length of the C<$scalar> is used. If possible, C<$length>
		2291	will be reduced to fit into the C<$scalar>.
		2292
1924	On systems that do not implement C<mprotect>, this function returns	2293	On systems that do not implement C<mprotect>, this function returns
1925	ENOSYS, otherwise the return value of C<mprotect>.	2294	ENOSYS, otherwise the return value of C<mprotect>.
1926		2295
1927	=item IO::AIO::mmap $scalar, $length, $prot, $flags, $fh[, $offset]	2296	=item IO::AIO::mmap $scalar, $length, $prot, $flags, $fh[, $offset]
1928		2297
1929	Memory-maps a file (or anonymous memory range) and attaches it to the	2298	Memory-maps a file (or anonymous memory range) and attaches it to the
1930	given C<$scalar>, which will act like a string scalar. Returns true on	2299	given C<$scalar>, which will act like a string scalar. Returns true on
1931	success, and false otherwise.	2300	success, and false otherwise.
1932		2301
		2302	The scalar must exist, but its contents do not matter - this means you
		2303	cannot use a nonexistant array or hash element. When in doubt, C<undef>
		2304	the scalar first.
		2305
1933	The only operations allowed on the scalar are C<substr>/C<vec> that don't	2306	The only operations allowed on the mmapped scalar are C<substr>/C<vec>,
1934	change the string length, and most read-only operations such as copying it	2307	which don't change the string length, and most read-only operations such
1935	or searching it with regexes and so on.	2308	as copying it or searching it with regexes and so on.
1936		2309
1937	Anything else is unsafe and will, at best, result in memory leaks.	2310	Anything else is unsafe and will, at best, result in memory leaks.
1938		2311
1939	The memory map associated with the C<$scalar> is automatically removed	2312	The memory map associated with the C<$scalar> is automatically removed
1940	when the C<$scalar> is destroyed, or when the C<IO::AIO::mmap> or	2313	when the C<$scalar> is undef'd or destroyed, or when the C<IO::AIO::mmap>
1941	C<IO::AIO::munmap> functions are called.	2314	or C<IO::AIO::munmap> functions are called on it.
1942		2315
1943	This calls the C<mmap>(2) function internally. See your system's manual	2316	This calls the C<mmap>(2) function internally. See your system's manual
1944	page for details on the C<$length>, C<$prot> and C<$flags> parameters.	2317	page for details on the C<$length>, C<$prot> and C<$flags> parameters.
1945		2318
1946	The C<$length> must be larger than zero and smaller than the actual	2319	The C<$length> must be larger than zero and smaller than the actual
1947	filesize.	2320	filesize.
1948		2321
1949	C<$prot> is a combination of C<IO::AIO::PROT_NONE>, C<IO::AIO::PROT_EXEC>,	2322	C<$prot> is a combination of C<IO::AIO::PROT_NONE>, C<IO::AIO::PROT_EXEC>,
1950	C<IO::AIO::PROT_READ> and/or C<IO::AIO::PROT_WRITE>,	2323	C<IO::AIO::PROT_READ> and/or C<IO::AIO::PROT_WRITE>,
1951		2324
1952	C<$flags> can be a combination of C<IO::AIO::MAP_SHARED> or	2325	C<$flags> can be a combination of
1953	C<IO::AIO::MAP_PRIVATE>, or a number of system-specific flags (when	2326	C<IO::AIO::MAP_SHARED> or
1954	not available, the are defined as 0): C<IO::AIO::MAP_ANONYMOUS>	2327	C<IO::AIO::MAP_PRIVATE>,
		2328	or a number of system-specific flags (when not available, the are C<0>):
1955	(which is set to C<MAP_ANON> if your system only provides this	2329	C<IO::AIO::MAP_ANONYMOUS> (which is set to C<MAP_ANON> if your system only provides this constant),
1956	constant), C<IO::AIO::MAP_HUGETLB>, C<IO::AIO::MAP_LOCKED>,	2330	C<IO::AIO::MAP_LOCKED>,
1957	C<IO::AIO::MAP_NORESERVE>, C<IO::AIO::MAP_POPULATE> or	2331	C<IO::AIO::MAP_NORESERVE>,
		2332	C<IO::AIO::MAP_POPULATE>,
1958	C<IO::AIO::MAP_NONBLOCK>	2333	C<IO::AIO::MAP_NONBLOCK>,
		2334	C<IO::AIO::MAP_FIXED>,
		2335	C<IO::AIO::MAP_GROWSDOWN>,
		2336	C<IO::AIO::MAP_32BIT>,
		2337	C<IO::AIO::MAP_HUGETLB> or
		2338	C<IO::AIO::MAP_STACK>.
1959		2339
1960	If C<$fh> is C<undef>, then a file descriptor of C<-1> is passed.	2340	If C<$fh> is C<undef>, then a file descriptor of C<-1> is passed.
1961		2341
1962	C<$offset> is the offset from the start of the file - it generally must be	2342	C<$offset> is the offset from the start of the file - it generally must be
1963	a multiple of C<IO::AIO::PAGESIZE> and defaults to C<0>.	2343	a multiple of C<IO::AIO::PAGESIZE> and defaults to C<0>.
…		…
1976	my $fast_md5 = md5 $data;	2356	my $fast_md5 = md5 $data;
1977		2357
1978	=item IO::AIO::munmap $scalar	2358	=item IO::AIO::munmap $scalar
1979		2359
1980	Removes a previous mmap and undefines the C<$scalar>.	2360	Removes a previous mmap and undefines the C<$scalar>.
		2361
		2362	=item IO::AIO::mremap $scalar, $new_length, $flags = MREMAP_MAYMOVE[, $new_address = 0]
		2363
		2364	Calls the Linux-specific mremap(2) system call. The C<$scalar> must have
		2365	been mapped by C<IO::AIO::mmap>, and C<$flags> must currently either be
		2366	C<0> or C<IO::AIO::MREMAP_MAYMOVE>.
		2367
		2368	Returns true if successful, and false otherwise. If the underlying mmapped
		2369	region has changed address, then the true value has the numerical value
		2370	C<1>, otherwise it has the numerical value C<0>:
		2371
		2372	my $success = IO::AIO::mremap $mmapped, 8192, IO::AIO::MREMAP_MAYMOVE
		2373	or die "mremap: $!";
		2374
		2375	if ($success*1) {
		2376	warn "scalar has chanegd address in memory\n";
		2377	}
		2378
		2379	C<IO::AIO::MREMAP_FIXED> and the C<$new_address> argument are currently
		2380	implemented, but not supported and might go away in a future version.
		2381
		2382	On systems where this call is not supported or is not emulated, this call
		2383	returns falls and sets C<$!> to C<ENOSYS>.
		2384
		2385	=item IO::AIO::mlockall $flags
		2386
		2387	Calls the C<eio_mlockall_sync> function, which is like C<aio_mlockall>,
		2388	but is blocking.
1981		2389
1982	=item IO::AIO::munlock $scalar, $offset = 0, $length = undef	2390	=item IO::AIO::munlock $scalar, $offset = 0, $length = undef
1983		2391
1984	Calls the C<munlock> function, undoing the effects of a previous	2392	Calls the C<munlock> function, undoing the effects of a previous
1985	C<aio_mlock> call (see its description for details).	2393	C<aio_mlock> call (see its description for details).
…		…
2006		2414
2007	See the C<splice(2)> manpage for details.	2415	See the C<splice(2)> manpage for details.
2008		2416
2009	=item IO::AIO::tee $r_fh, $w_fh, $length, $flags	2417	=item IO::AIO::tee $r_fh, $w_fh, $length, $flags
2010		2418
2011	Calls the GNU/Linux C<tee(2)> syscall, see it's manpage and the	2419	Calls the GNU/Linux C<tee(2)> syscall, see its manpage and the
2012	description for C<IO::AIO::splice> above for details.	2420	description for C<IO::AIO::splice> above for details.
		2421
		2422	=item $actual_size = IO::AIO::pipesize $r_fh[, $new_size]
		2423
		2424	Attempts to query or change the pipe buffer size. Obviously works only
		2425	on pipes, and currently works only on GNU/Linux systems, and fails with
		2426	C<-1>/C<ENOSYS> everywhere else. If anybody knows how to influence pipe buffer
		2427	size on other systems, drop me a note.
		2428
		2429	=item ($rfh, $wfh) = IO::AIO::pipe2 [$flags]
		2430
		2431	This is a direct interface to the Linux L<pipe2(2)> system call. If
		2432	C<$flags> is missing or C<0>, then this should be the same as a call to
		2433	perl's built-in C<pipe> function and create a new pipe, and works on
		2434	systems that lack the pipe2 syscall. On win32, this case invokes C<_pipe
		2435	(..., 4096, O_BINARY)>.
		2436
		2437	If C<$flags> is non-zero, it tries to invoke the pipe2 system call with
		2438	the given flags (Linux 2.6.27, glibc 2.9).
		2439
		2440	On success, the read and write file handles are returned.
		2441
		2442	On error, nothing will be returned. If the pipe2 syscall is missing and
		2443	C<$flags> is non-zero, fails with C<ENOSYS>.
		2444
		2445	Please refer to L<pipe2(2)> for more info on the C<$flags>, but at the
		2446	time of this writing, C<IO::AIO::O_CLOEXEC>, C<IO::AIO::O_NONBLOCK> and
		2447	C<IO::AIO::O_DIRECT> (Linux 3.4, for packet-based pipes) were supported.
		2448
		2449	Example: create a pipe race-free w.r.t. threads and fork:
		2450
		2451	my ($rfh, $wfh) = IO::AIO::pipe2 IO::AIO::O_CLOEXEC
		2452	or die "pipe2: $!\n";
		2453
		2454	=item $fh = IO::AIO::memfd_create $pathname[, $flags]
		2455
		2456	This is a direct interface to the Linux L<memfd_create(2)> system
		2457	call. The (unhelpful) default for C<$flags> is C<0>, but your default
		2458	should be C<IO::AIO::MFD_CLOEXEC>.
		2459
		2460	On success, the new memfd filehandle is returned, otherwise returns
		2461	C<undef>. If the memfd_create syscall is missing, fails with C<ENOSYS>.
		2462
		2463	Please refer to L<memfd_create(2)> for more info on this call.
		2464
		2465	The following C<$flags> values are available: C<IO::AIO::MFD_CLOEXEC>,
		2466	C<IO::AIO::MFD_ALLOW_SEALING> and C<IO::AIO::MFD_HUGETLB>.
		2467
		2468	Example: create a new memfd.
		2469
		2470	my $fh = IO::AIO::memfd_create "somenameforprocfd", IO::AIO::MFD_CLOEXEC
		2471	or die "m,emfd_create: $!\n";
		2472	=item $fh = IO::AIO::eventfd [$initval, [$flags]]
		2473
		2474	This is a direct interface to the Linux L<eventfd(2)> system call. The
		2475	(unhelpful) defaults for C<$initval> and C<$flags> are C<0> for both.
		2476
		2477	On success, the new eventfd filehandle is returned, otherwise returns
		2478	C<undef>. If the eventfd syscall is missing, fails with C<ENOSYS>.
		2479
		2480	Please refer to L<eventfd(2)> for more info on this call.
		2481
		2482	The following symbol flag values are available: C<IO::AIO::EFD_CLOEXEC>,
		2483	C<IO::AIO::EFD_NONBLOCK> and C<IO::AIO::EFD_SEMAPHORE> (Linux 2.6.30).
		2484
		2485	Example: create a new eventfd filehandle:
		2486
		2487	$fh = IO::AIO::eventfd 0, IO::AIO::EFD_CLOEXEC
		2488	or die "eventfd: $!\n";
		2489
		2490	=item $fh = IO::AIO::timerfd_create $clockid[, $flags]
		2491
		2492	This is a direct interface to the Linux L<timerfd_create(2)> system
		2493	call. The (unhelpful) default for C<$flags> is C<0>, but your default
		2494	should be C<IO::AIO::TFD_CLOEXEC>.
		2495
		2496	On success, the new timerfd filehandle is returned, otherwise returns
		2497	C<undef>. If the timerfd_create syscall is missing, fails with C<ENOSYS>.
		2498
		2499	Please refer to L<timerfd_create(2)> for more info on this call.
		2500
		2501	The following C<$clockid> values are
		2502	available: C<IO::AIO::CLOCK_REALTIME>, C<IO::AIO::CLOCK_MONOTONIC>
		2503	C<IO::AIO::CLOCK_CLOCK_BOOTTIME> (Linux 3.15)
		2504	C<IO::AIO::CLOCK_CLOCK_REALTIME_ALARM> (Linux 3.11) and
		2505	C<IO::AIO::CLOCK_CLOCK_BOOTTIME_ALARM> (Linux 3.11).
		2506
		2507	The following C<$flags> values are available (Linux
		2508	2.6.27): C<IO::AIO::TFD_NONBLOCK> and C<IO::AIO::TFD_CLOEXEC>.
		2509
		2510	Example: create a new timerfd and set it to one-second repeated alarms,
		2511	then wait for two alarms:
		2512
		2513	my $fh = IO::AIO::timerfd_create IO::AIO::CLOCK_BOOTTIME, IO::AIO::TFD_CLOEXEC
		2514	or die "timerfd_create: $!\n";
		2515
		2516	defined IO::AIO::timerfd_settime $fh, 0, 1, 1
		2517	or die "timerfd_settime: $!\n";
		2518
		2519	for (1..2) {
		2520	8 == sysread $fh, my $buf, 8
		2521	or die "timerfd read failure\n";
		2522
		2523	printf "number of expirations (likely 1): %d\n",
		2524	unpack "Q", $buf;
		2525	}
		2526
		2527	=item ($cur_interval, $cur_value) = IO::AIO::timerfd_settime $fh, $flags, $new_interval, $nbw_value
		2528
		2529	This is a direct interface to the Linux L<timerfd_settime(2)> system
		2530	call. Please refer to its manpage for more info on this call.
		2531
		2532	The new itimerspec is specified using two (possibly fractional) second
		2533	values, C<$new_interval> and C<$new_value>).
		2534
		2535	On success, the current interval and value are returned (as per
		2536	C<timerfd_gettime>). On failure, the empty list is returned.
		2537
		2538	The following C<$flags> values are
		2539	available: C<IO::AIO::TFD_TIMER_ABSTIME> and
		2540	C<IO::AIO::TFD_TIMER_CANCEL_ON_SET>.
		2541
		2542	See C<IO::AIO::timerfd_create> for a full example.
		2543
		2544	=item ($cur_interval, $cur_value) = IO::AIO::timerfd_gettime $fh
		2545
		2546	This is a direct interface to the Linux L<timerfd_gettime(2)> system
		2547	call. Please refer to its manpage for more info on this call.
		2548
		2549	On success, returns the current values of interval and value for the given
		2550	timerfd (as potentially fractional second values). On failure, the empty
		2551	list is returned.
2013		2552
2014	=back	2553	=back
2015		2554
2016	=cut	2555	=cut
2017		2556
…		…
2083	the process will result in undefined behaviour. Calling it at any time	2622	the process will result in undefined behaviour. Calling it at any time
2084	will also result in any undefined (by POSIX) behaviour.	2623	will also result in any undefined (by POSIX) behaviour.
2085		2624
2086	=back	2625	=back
2087		2626
		2627	=head2 LINUX-SPECIFIC CALLS
		2628
		2629	When a call is documented as "linux-specific" then this means it
		2630	originated on GNU/Linux. C<IO::AIO> will usually try to autodetect the
		2631	availability and compatibility of such calls regardless of the platform
		2632	it is compiled on, so platforms such as FreeBSD which often implement
		2633	these calls will work. When in doubt, call them and see if they fail wth
		2634	C<ENOSYS>.
		2635
2088	=head2 MEMORY USAGE	2636	=head2 MEMORY USAGE
2089		2637
2090	Per-request usage:	2638	Per-request usage:
2091		2639
2092	Each aio request uses - depending on your architecture - around 100-200	2640	Each aio request uses - depending on your architecture - around 100-200
…		…
2104	temporary buffers, and each thread requires a stack and other data	2652	temporary buffers, and each thread requires a stack and other data
2105	structures (usually around 16k-128k, depending on the OS).	2653	structures (usually around 16k-128k, depending on the OS).
2106		2654
2107	=head1 KNOWN BUGS	2655	=head1 KNOWN BUGS
2108		2656
2109	Known bugs will be fixed in the next release.	2657	Known bugs will be fixed in the next release :)
		2658
		2659	=head1 KNOWN ISSUES
		2660
		2661	Calls that try to "import" foreign memory areas (such as C<IO::AIO::mmap>
		2662	or C<IO::AIO::aio_slurp>) do not work with generic lvalues, such as
		2663	non-created hash slots or other scalars I didn't think of. It's best to
		2664	avoid such and either use scalar variables or making sure that the scalar
		2665	exists (e.g. by storing C<undef>) and isn't "funny" (e.g. tied).
		2666
		2667	I am not sure anything can be done about this, so this is considered a
		2668	known issue, rather than a bug.
2110		2669
2111	=head1 SEE ALSO	2670	=head1 SEE ALSO
2112		2671
2113	L<AnyEvent::AIO> for easy integration into event loops, L<Coro::AIO> for a	2672	L<AnyEvent::AIO> for easy integration into event loops, L<Coro::AIO> for a
2114	more natural syntax.	2673	more natural syntax.

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing IO-AIO/AIO.pm (file contents): Revision 1.229 by root, Wed Jul 25 16:32:30 2012 UTC vs. Revision 1.303 by root, Wed Apr 3 03:09:04 2019 UTC

Diff Legend

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.229 by root, Wed Jul 25 16:32:30 2012 UTC vs.
Revision 1.303 by root, Wed Apr 3 03:09:04 2019 UTC