[ViewVC] Diff of: cvs/IO-AIO/AIO.pm

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.222 by root, Fri Apr 6 11:39:25 2012 UTC vs.
Revision 1.241 by root, Fri Dec 28 07:33:41 2012 UTC

…		…
168	use common::sense;	168	use common::sense;
169		169
170	use base 'Exporter';	170	use base 'Exporter';
171		171
172	BEGIN {	172	BEGIN {
173	our $VERSION = '4.13';	173	our $VERSION = '4.18';
174		174
175	our @AIO_REQ = qw(aio_sendfile aio_seek aio_read aio_write aio_open aio_close	175	our @AIO_REQ = qw(aio_sendfile aio_seek aio_read aio_write aio_open aio_close
176	aio_stat aio_lstat aio_unlink aio_rmdir aio_readdir aio_readdirx	176	aio_stat aio_lstat aio_unlink aio_rmdir aio_readdir aio_readdirx
177	aio_scandir aio_symlink aio_readlink aio_realpath aio_sync	177	aio_scandir aio_symlink aio_readlink aio_realpath aio_sync
178	aio_fsync aio_syncfs aio_fdatasync aio_sync_file_range aio_fallocate	178	aio_fsync aio_syncfs aio_fdatasync aio_sync_file_range aio_allocate
179	aio_pathsync aio_readahead aio_fiemap	179	aio_pathsync aio_readahead aio_fiemap
180	aio_rename aio_link aio_move aio_copy aio_group	180	aio_rename aio_link aio_move aio_copy aio_group
181	aio_nop aio_mknod aio_load aio_rmtree aio_mkdir aio_chown	181	aio_nop aio_mknod aio_load aio_rmtree aio_mkdir aio_chown
182	aio_chmod aio_utime aio_truncate	182	aio_chmod aio_utime aio_truncate
183	aio_msync aio_mtouch aio_mlock aio_mlockall	183	aio_msync aio_mtouch aio_mlock aio_mlockall
…		…
202		202
203	=head1 FUNCTIONS	203	=head1 FUNCTIONS
204		204
205	=head2 QUICK OVERVIEW	205	=head2 QUICK OVERVIEW
206		206
207	This section simply lists the prototypes of the most important functions	207	This section simply lists the prototypes most of the functions for
208	for quick reference. See the following sections for function-by-function	208	quick reference. See the following sections for function-by-function
209	documentation.	209	documentation.
210		210
211	aio_wd $pathname, $callback->($wd)	211	aio_wd $pathname, $callback->($wd)
212	aio_open $pathname, $flags, $mode, $callback->($fh)	212	aio_open $pathname, $flags, $mode, $callback->($fh)
213	aio_close $fh, $callback->($status)	213	aio_close $fh, $callback->($status)
…		…
221	aio_statvfs $fh_or_path, $callback->($statvfs)	221	aio_statvfs $fh_or_path, $callback->($statvfs)
222	aio_utime $fh_or_path, $atime, $mtime, $callback->($status)	222	aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
223	aio_chown $fh_or_path, $uid, $gid, $callback->($status)	223	aio_chown $fh_or_path, $uid, $gid, $callback->($status)
224	aio_chmod $fh_or_path, $mode, $callback->($status)	224	aio_chmod $fh_or_path, $mode, $callback->($status)
225	aio_truncate $fh_or_path, $offset, $callback->($status)	225	aio_truncate $fh_or_path, $offset, $callback->($status)
		226	aio_allocate $fh, $mode, $offset, $len, $callback->($status)
		227	aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)
226	aio_unlink $pathname, $callback->($status)	228	aio_unlink $pathname, $callback->($status)
227	aio_mknod $pathname, $mode, $dev, $callback->($status)	229	aio_mknod $pathname, $mode, $dev, $callback->($status)
228	aio_link $srcpath, $dstpath, $callback->($status)	230	aio_link $srcpath, $dstpath, $callback->($status)
229	aio_symlink $srcpath, $dstpath, $callback->($status)	231	aio_symlink $srcpath, $dstpath, $callback->($status)
230	aio_readlink $pathname, $callback->($link)	232	aio_readlink $pathname, $callback->($link)
…		…
272	IO::AIO::nready	274	IO::AIO::nready
273	IO::AIO::npending	275	IO::AIO::npending
274		276
275	IO::AIO::sendfile $ofh, $ifh, $offset, $count	277	IO::AIO::sendfile $ofh, $ifh, $offset, $count
276	IO::AIO::fadvise $fh, $offset, $len, $advice	278	IO::AIO::fadvise $fh, $offset, $len, $advice
		279	IO::AIO::mmap $scalar, $length, $prot, $flags[, $fh[, $offset]]
		280	IO::AIO::munmap $scalar
277	IO::AIO::madvise $scalar, $offset, $length, $advice	281	IO::AIO::madvise $scalar, $offset, $length, $advice
278	IO::AIO::mprotect $scalar, $offset, $length, $protect	282	IO::AIO::mprotect $scalar, $offset, $length, $protect
279	IO::AIO::munlock $scalar, $offset = 0, $length = undef	283	IO::AIO::munlock $scalar, $offset = 0, $length = undef
280	IO::AIO::munlockall	284	IO::AIO::munlockall
281		285
…		…
358		362
359		363
360	=item aio_open $pathname, $flags, $mode, $callback->($fh)	364	=item aio_open $pathname, $flags, $mode, $callback->($fh)
361		365
362	Asynchronously open or create a file and call the callback with a newly	366	Asynchronously open or create a file and call the callback with a newly
363	created filehandle for the file.	367	created filehandle for the file (or C<undef> in case of an error).
364		368
365	The pathname passed to C<aio_open> must be absolute. See API NOTES, above,	369	The pathname passed to C<aio_open> must be absolute. See API NOTES, above,
366	for an explanation.	370	for an explanation.
367		371
368	The C<$flags> argument is a bitmask. See the C<Fcntl> module for a	372	The C<$flags> argument is a bitmask. See the C<Fcntl> module for a
…		…
424	case of an error.	428	case of an error.
425		429
426	In theory, the C<$whence> constants could be different than the	430	In theory, the C<$whence> constants could be different than the
427	corresponding values from L<Fcntl>, but perl guarantees they are the same,	431	corresponding values from L<Fcntl>, but perl guarantees they are the same,
428	so don't panic.	432	so don't panic.
		433
		434	As a GNU/Linux (and maybe Solaris) extension, also the constants
		435	C<IO::AIO::SEEK_DATA> and C<IO::AIO::SEEK_HOLE> are available, if they
		436	could be found. No guarantees about suitability for use in C<aio_seek> or
		437	Perl's C<sysseek> can be made though, although I would naively assume they
		438	"just work".
429		439
430	=item aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)	440	=item aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
431		441
432	=item aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)	442	=item aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
433		443
…		…
593	namemax => 255,	603	namemax => 255,
594	frsize => 1024,	604	frsize => 1024,
595	fsid => 1810	605	fsid => 1810
596	}	606	}
597		607
		608	Here is a (likely partial) list of fsid values used by Linux - it is safe
		609	to hardcode these when the $^O is C<linux>:
		610
		611	0x0000adf5 adfs
		612	0x0000adff affs
		613	0x5346414f afs
		614	0x09041934 anon-inode filesystem
		615	0x00000187 autofs
		616	0x42465331 befs
		617	0x1badface bfs
		618	0x42494e4d binfmt_misc
		619	0x9123683e btrfs
		620	0x0027e0eb cgroupfs
		621	0xff534d42 cifs
		622	0x73757245 coda
		623	0x012ff7b7 coh
		624	0x28cd3d45 cramfs
		625	0x453dcd28 cramfs-wend (wrong endianness)
		626	0x64626720 debugfs
		627	0x00001373 devfs
		628	0x00001cd1 devpts
		629	0x0000f15f ecryptfs
		630	0x00414a53 efs
		631	0x0000137d ext
		632	0x0000ef53 ext2/ext3
		633	0x0000ef51 ext2
		634	0x00004006 fat
		635	0x65735546 fuseblk
		636	0x65735543 fusectl
		637	0x0bad1dea futexfs
		638	0x01161970 gfs2
		639	0x47504653 gpfs
		640	0x00004244 hfs
		641	0xf995e849 hpfs
		642	0x958458f6 hugetlbfs
		643	0x2bad1dea inotifyfs
		644	0x00009660 isofs
		645	0x000072b6 jffs2
		646	0x3153464a jfs
		647	0x6b414653 k-afs
		648	0x0bd00bd0 lustre
		649	0x0000137f minix
		650	0x0000138f minix 30 char names
		651	0x00002468 minix v2
		652	0x00002478 minix v2 30 char names
		653	0x00004d5a minix v3
		654	0x19800202 mqueue
		655	0x00004d44 msdos
		656	0x0000564c novell
		657	0x00006969 nfs
		658	0x6e667364 nfsd
		659	0x00003434 nilfs
		660	0x5346544e ntfs
		661	0x00009fa1 openprom
		662	0x7461636F ocfs2
		663	0x00009fa0 proc
		664	0x6165676c pstorefs
		665	0x0000002f qnx4
		666	0x858458f6 ramfs
		667	0x52654973 reiserfs
		668	0x00007275 romfs
		669	0x67596969 rpc_pipefs
		670	0x73636673 securityfs
		671	0xf97cff8c selinux
		672	0x0000517b smb
		673	0x534f434b sockfs
		674	0x73717368 squashfs
		675	0x62656572 sysfs
		676	0x012ff7b6 sysv2
		677	0x012ff7b5 sysv4
		678	0x01021994 tmpfs
		679	0x15013346 udf
		680	0x00011954 ufs
		681	0x54190100 ufs byteswapped
		682	0x00009fa2 usbdevfs
		683	0x01021997 v9fs
		684	0xa501fcf5 vxfs
		685	0xabba1974 xenfs
		686	0x012ff7b4 xenix
		687	0x58465342 xfs
		688	0x012fd16d xia
598		689
599	=item aio_utime $fh_or_path, $atime, $mtime, $callback->($status)	690	=item aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
600		691
601	Works like perl's C<utime> function (including the special case of $atime	692	Works like perl's C<utime> function (including the special case of $atime
602	and $mtime being undef). Fractional times are supported if the underlying	693	and $mtime being undef). Fractional times are supported if the underlying
…		…
630	=item aio_truncate $fh_or_path, $offset, $callback->($status)	721	=item aio_truncate $fh_or_path, $offset, $callback->($status)
631		722
632	Works like truncate(2) or ftruncate(2).	723	Works like truncate(2) or ftruncate(2).
633		724
634		725
		726	=item aio_allocate $fh, $mode, $offset, $len, $callback->($status)
		727
		728	Allocates or freed disk space according to the C<$mode> argument. See the
		729	linux C<fallocate> docuemntation for details.
		730
		731	C<$mode> can currently be C<0> or C<IO::AIO::FALLOC_FL_KEEP_SIZE>
		732	to allocate space, or C<IO::AIO::FALLOC_FL_PUNCH_HOLE \|
		733	IO::AIO::FALLOC_FL_KEEP_SIZE>, to deallocate a file range.
		734
		735	The file system block size used by C<fallocate> is presumably the
		736	C<f_bsize> returned by C<statvfs>.
		737
		738	If C<fallocate> isn't available or cannot be emulated (currently no
		739	emulation will be attempted), passes C<-1> and sets C<$!> to C<ENOSYS>.
		740
		741
635	=item aio_chmod $fh_or_path, $mode, $callback->($status)	742	=item aio_chmod $fh_or_path, $mode, $callback->($status)
636		743
637	Works like perl's C<chmod> function.	744	Works like perl's C<chmod> function.
638		745
639		746
…		…
676		783
677		784
678	=item aio_realpath $pathname, $callback->($path)	785	=item aio_realpath $pathname, $callback->($path)
679		786
680	Asynchronously make the path absolute and resolve any symlinks in	787	Asynchronously make the path absolute and resolve any symlinks in
681	C<$path>. The resulting path only consists of directories (Same as	788	C<$path>. The resulting path only consists of directories (same as
682	L<Cwd::realpath>).	789	L<Cwd::realpath>).
683		790
684	This request can be used to get the absolute path of the current working	791	This request can be used to get the absolute path of the current working
685	directory by passing it a path of F<.> (a single dot).	792	directory by passing it a path of F<.> (a single dot).
686		793
687		794
688	=item aio_rename $srcpath, $dstpath, $callback->($status)	795	=item aio_rename $srcpath, $dstpath, $callback->($status)
689		796
690	Asynchronously rename the object at C<$srcpath> to C<$dstpath>, just as	797	Asynchronously rename the object at C<$srcpath> to C<$dstpath>, just as
691	rename(2) and call the callback with the result code.	798	rename(2) and call the callback with the result code.
		799
		800	On systems that support the AIO::WD working directory abstraction
		801	natively, the case C<[$wd, "."]> as C<$srcpath> is specialcased - instead
		802	of failing, C<rename> is called on the absolute path of C<$wd>.
692		803
693		804
694	=item aio_mkdir $pathname, $mode, $callback->($status)	805	=item aio_mkdir $pathname, $mode, $callback->($status)
695		806
696	Asynchronously mkdir (create) a directory and call the callback with	807	Asynchronously mkdir (create) a directory and call the callback with
…		…
700		811
701	=item aio_rmdir $pathname, $callback->($status)	812	=item aio_rmdir $pathname, $callback->($status)
702		813
703	Asynchronously rmdir (delete) a directory and call the callback with the	814	Asynchronously rmdir (delete) a directory and call the callback with the
704	result code.	815	result code.
		816
		817	On systems that support the AIO::WD working directory abstraction
		818	natively, the case C<[$wd, "."]> is specialcased - instead of failing,
		819	C<rmdir> is called on the absolute path of C<$wd>.
705		820
706		821
707	=item aio_readdir $pathname, $callback->($entries)	822	=item aio_readdir $pathname, $callback->($entries)
708		823
709	Unlike the POSIX call of the same name, C<aio_readdir> reads an entire	824	Unlike the POSIX call of the same name, C<aio_readdir> reads an entire
…		…
1074	}	1189	}
1075		1190
1076	=item aio_rmtree $pathname, $callback->($status)	1191	=item aio_rmtree $pathname, $callback->($status)
1077		1192
1078	Delete a directory tree starting (and including) C<$path>, return the	1193	Delete a directory tree starting (and including) C<$path>, return the
1079	status of the final C<rmdir> only. This is a composite request that	1194	status of the final C<rmdir> only. This is a composite request that
1080	uses C<aio_scandir> to recurse into and rmdir directories, and unlink	1195	uses C<aio_scandir> to recurse into and rmdir directories, and unlink
1081	everything else.	1196	everything else.
1082		1197
1083	=cut	1198	=cut
1084		1199
…		…
1204		1319
1205	This is a rather advanced IO::AIO call, which works best on mmap(2)ed	1320	This is a rather advanced IO::AIO call, which works best on mmap(2)ed
1206	scalars.	1321	scalars.
1207		1322
1208	It touches (reads or writes) all memory pages in the specified	1323	It touches (reads or writes) all memory pages in the specified
1209	range inside the scalar. All caveats and parameters are the same	1324	range inside the scalar. All caveats and parameters are the same
1210	as for C<aio_msync>, above, except for flags, which must be either	1325	as for C<aio_msync>, above, except for flags, which must be either
1211	C<0> (which reads all pages and ensures they are instantiated) or	1326	C<0> (which reads all pages and ensures they are instantiated) or
1212	C<IO::AIO::MT_MODIFY>, which modifies the memory page s(by reading and	1327	C<IO::AIO::MT_MODIFY>, which modifies the memory pages (by reading and
1213	writing an octet from it, which dirties the page).	1328	writing an octet from it, which dirties the page).
1214		1329
1215	=item aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)	1330	=item aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
1216		1331
1217	This is a rather advanced IO::AIO call, which works best on mmap(2)ed	1332	This is a rather advanced IO::AIO call, which works best on mmap(2)ed
…		…
1248	documented under L<MISCELLANEOUS FUNCTIONS>.	1363	documented under L<MISCELLANEOUS FUNCTIONS>.
1249		1364
1250	Example: asynchronously lock all current and future pages into memory.	1365	Example: asynchronously lock all current and future pages into memory.
1251		1366
1252	aio_mlockall IO::AIO::MCL_FUTURE;	1367	aio_mlockall IO::AIO::MCL_FUTURE;
		1368
		1369	=item aio_fiemap $fh, $start, $length, $flags, $count, $cb->(\@extents)
		1370
		1371	Queries the extents of the given file (by calling the Linux C<FIEMAP>
		1372	ioctl, see L<http://cvs.schmorp.de/IO-AIO/doc/fiemap.txt> for details). If
		1373	the ioctl is not available on your OS, then this request will fail with
		1374	C<ENOSYS>.
		1375
		1376	C<$start> is the starting offset to query extents for, C<$length> is the
		1377	size of the range to query - if it is C<undef>, then the whole file will
		1378	be queried.
		1379
		1380	C<$flags> is a combination of flags (C<IO::AIO::FIEMAP_FLAG_SYNC> or
		1381	C<IO::AIO::FIEMAP_FLAG_XATTR> - C<IO::AIO::FIEMAP_FLAGS_COMPAT> is also
		1382	exported), and is normally C<0> or C<IO::AIO::FIEMAP_FLAG_SYNC> to query
		1383	the data portion.
		1384
		1385	C<$count> is the maximum number of extent records to return. If it is
		1386	C<undef>, then IO::AIO queries all extents of the range. As a very special
		1387	case, if it is C<0>, then the callback receives the number of extents
		1388	instead of the extents themselves (which is unreliable, see below).
		1389
		1390	If an error occurs, the callback receives no arguments. The special
		1391	C<errno> value C<IO::AIO::EBADR> is available to test for flag errors.
		1392
		1393	Otherwise, the callback receives an array reference with extent
		1394	structures. Each extent structure is an array reference itself, with the
		1395	following members:
		1396
		1397	[$logical, $physical, $length, $flags]
		1398
		1399	Flags is any combination of the following flag values (typically either C<0>
		1400	or C<IO::AIO::FIEMAP_EXTENT_LAST> (1)):
		1401
		1402	C<IO::AIO::FIEMAP_EXTENT_LAST>, C<IO::AIO::FIEMAP_EXTENT_UNKNOWN>,
		1403	C<IO::AIO::FIEMAP_EXTENT_DELALLOC>, C<IO::AIO::FIEMAP_EXTENT_ENCODED>,
		1404	C<IO::AIO::FIEMAP_EXTENT_DATA_ENCRYPTED>, C<IO::AIO::FIEMAP_EXTENT_NOT_ALIGNED>,
		1405	C<IO::AIO::FIEMAP_EXTENT_DATA_INLINE>, C<IO::AIO::FIEMAP_EXTENT_DATA_TAIL>,
		1406	C<IO::AIO::FIEMAP_EXTENT_UNWRITTEN>, C<IO::AIO::FIEMAP_EXTENT_MERGED> or
		1407	C<IO::AIO::FIEMAP_EXTENT_SHARED>.
		1408
		1409	At the time of this writing (Linux 3.2), this requets is unreliable unless
		1410	C<$count> is C<undef>, as the kernel has all sorts of bugs preventing
		1411	it to return all extents of a range for files with large number of
		1412	extents. The code works around all these issues if C<$count> is undef.
1253		1413
1254	=item aio_group $callback->(...)	1414	=item aio_group $callback->(...)
1255		1415
1256	This is a very special aio request: Instead of doing something, it is a	1416	This is a very special aio request: Instead of doing something, it is a
1257	container for other aio requests, which is useful if you want to bundle	1417	container for other aio requests, which is useful if you want to bundle
…		…
1373	will still point to the original directory. Most functions accepting a	1533	will still point to the original directory. Most functions accepting a
1374	pathname will use the directory fd on newer systems, and the string on	1534	pathname will use the directory fd on newer systems, and the string on
1375	older systems. Some functions (such as realpath) will always rely on the	1535	older systems. Some functions (such as realpath) will always rely on the
1376	string form of the pathname.	1536	string form of the pathname.
1377		1537
1378	So this fucntionality is mainly useful to get some protection against	1538	So this functionality is mainly useful to get some protection against
1379	C<chdir>, to easily get an absolute path out of a relative path for future	1539	C<chdir>, to easily get an absolute path out of a relative path for future
1380	reference, and to speed up doing many operations in the same directory	1540	reference, and to speed up doing many operations in the same directory
1381	(e.g. when stat'ing all files in a directory).	1541	(e.g. when stat'ing all files in a directory).
1382		1542
1383	The following functions implement this working directory abstraction:	1543	The following functions implement this working directory abstraction:
…		…
1404	=item IO::AIO::CWD	1564	=item IO::AIO::CWD
1405		1565
1406	This is a compiletime constant (object) that represents the process	1566	This is a compiletime constant (object) that represents the process
1407	current working directory.	1567	current working directory.
1408		1568
1409	Specifying this object as working directory object for a pathname is as	1569	Specifying this object as working directory object for a pathname is as if
1410	if the pathname would be specified directly, without a directory object,	1570	the pathname would be specified directly, without a directory object. For
1411	e.g., these calls are functionally identical:	1571	example, these calls are functionally identical:
1412		1572
1413	aio_stat "somefile", sub { ... };	1573	aio_stat "somefile", sub { ... };
1414	aio_stat [IO::AIO::CWD, "somefile"], sub { ... };	1574	aio_stat [IO::AIO::CWD, "somefile"], sub { ... };
1415		1575
1416	=back	1576	=back
1417		1577
		1578	To recover the path associated with an IO::AIO::WD object, you can use
		1579	C<aio_realpath>:
		1580
		1581	aio_realpath $wd, sub {
		1582	warn "path is $_[0]\n";
		1583	};
		1584
		1585	Currently, C<aio_statvfs> always, and C<aio_rename> and C<aio_rmdir>
		1586	sometimes, fall back to using an absolue path.
1418		1587
1419	=head2 IO::AIO::REQ CLASS	1588	=head2 IO::AIO::REQ CLASS
1420		1589
1421	All non-aggregate C<aio_*> functions return an object of this class when	1590	All non-aggregate C<aio_*> functions return an object of this class when
1422	called in non-void context.	1591	called in non-void context.
…		…
1600		1769
1601	See C<poll_cb> for an example.	1770	See C<poll_cb> for an example.
1602		1771
1603	=item IO::AIO::poll_cb	1772	=item IO::AIO::poll_cb
1604		1773
1605	Process some outstanding events on the result pipe. You have to call	1774	Process some requests that have reached the result phase (i.e. they have
		1775	been executed but the results are not yet reported). You have to call
		1776	this "regularly" to finish outstanding requests.
		1777
1606	this regularly. Returns C<0> if all events could be processed (or there	1778	Returns C<0> if all events could be processed (or there were no
1607	were no events to process), or C<-1> if it returned earlier for whatever	1779	events to process), or C<-1> if it returned earlier for whatever
1608	reason. Returns immediately when no events are outstanding. The amount of	1780	reason. Returns immediately when no events are outstanding. The amount
1609	events processed depends on the settings of C<IO::AIO::max_poll_req> and	1781	of events processed depends on the settings of C<IO::AIO::max_poll_req>,
1610	C<IO::AIO::max_poll_time>.	1782	C<IO::AIO::max_poll_time> and C<IO::AIO::max_outstanding>.
1611		1783
1612	If not all requests were processed for whatever reason, the filehandle	1784	If not all requests were processed for whatever reason, the poll file
1613	will still be ready when C<poll_cb> returns, so normally you don't have to	1785	descriptor will still be ready when C<poll_cb> returns, so normally you
1614	do anything special to have it called later.	1786	don't have to do anything special to have it called later.
1615		1787
1616	Apart from calling C<IO::AIO::poll_cb> when the event filehandle becomes	1788	Apart from calling C<IO::AIO::poll_cb> when the event filehandle becomes
1617	ready, it can be beneficial to call this function from loops which submit	1789	ready, it can be beneficial to call this function from loops which submit
1618	a lot of requests, to make sure the results get processed when they become	1790	a lot of requests, to make sure the results get processed when they become
1619	available and not just when the loop is finished and the event loop takes	1791	available and not just when the loop is finished and the event loop takes
…		…
1628	poll => 'r', async => 1,	1800	poll => 'r', async => 1,
1629	cb => \&IO::AIO::poll_cb);	1801	cb => \&IO::AIO::poll_cb);
1630		1802
1631	=item IO::AIO::poll_wait	1803	=item IO::AIO::poll_wait
1632		1804
1633	If there are any outstanding requests and none of them in the result	1805	Wait until either at least one request is in the result phase or no
1634	phase, wait till the result filehandle becomes ready for reading (simply	1806	requests are outstanding anymore.
1635	does a C<select> on the filehandle. This is useful if you want to	1807
1636	synchronously wait for some requests to finish).	1808	This is useful if you want to synchronously wait for some requests to
		1809	become ready, without actually handling them.
1637		1810
1638	See C<nreqs> for an example.	1811	See C<nreqs> for an example.
1639		1812
1640	=item IO::AIO::poll	1813	=item IO::AIO::poll
1641		1814
…		…
1860	ENOSYS, otherwise the return value of C<mprotect>.	2033	ENOSYS, otherwise the return value of C<mprotect>.
1861		2034
1862	=item IO::AIO::mmap $scalar, $length, $prot, $flags, $fh[, $offset]	2035	=item IO::AIO::mmap $scalar, $length, $prot, $flags, $fh[, $offset]
1863		2036
1864	Memory-maps a file (or anonymous memory range) and attaches it to the	2037	Memory-maps a file (or anonymous memory range) and attaches it to the
1865	given C<$scalar>, which will act like a string scalar.	2038	given C<$scalar>, which will act like a string scalar. Returns true on
		2039	success, and false otherwise.
1866		2040
1867	The only operations allowed on the scalar are C<substr>/C<vec> that don't	2041	The only operations allowed on the scalar are C<substr>/C<vec> that don't
1868	change the string length, and most read-only operations such as copying it	2042	change the string length, and most read-only operations such as copying it
1869	or searching it with regexes and so on.	2043	or searching it with regexes and so on.
1870		2044
…		…
1923	Calls the C<munlockall> function.	2097	Calls the C<munlockall> function.
1924		2098
1925	On systems that do not implement C<munlockall>, this function returns	2099	On systems that do not implement C<munlockall>, this function returns
1926	ENOSYS, otherwise the return value of C<munlockall>.	2100	ENOSYS, otherwise the return value of C<munlockall>.
1927		2101
		2102	=item IO::AIO::splice $r_fh, $r_off, $w_fh, $w_off, $length, $flags
		2103
		2104	Calls the GNU/Linux C<splice(2)> syscall, if available. If C<$r_off> or
		2105	C<$w_off> are C<undef>, then C<NULL> is passed for these, otherwise they
		2106	should be the file offset.
		2107
		2108	C<$r_fh> and C<$w_fh> should not refer to the same file, as splice might
		2109	silently corrupt the data in this case.
		2110
		2111	The following symbol flag values are available: C<IO::AIO::SPLICE_F_MOVE>,
		2112	C<IO::AIO::SPLICE_F_NONBLOCK>, C<IO::AIO::SPLICE_F_MORE> and
		2113	C<IO::AIO::SPLICE_F_GIFT>.
		2114
		2115	See the C<splice(2)> manpage for details.
		2116
		2117	=item IO::AIO::tee $r_fh, $w_fh, $length, $flags
		2118
		2119	Calls the GNU/Linux C<tee(2)> syscall, see it's manpage and the
		2120	description for C<IO::AIO::splice> above for details.
		2121
1928	=back	2122	=back
1929		2123
1930	=cut	2124	=cut
1931		2125
1932	min_parallel 8;	2126	min_parallel 8;

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing IO-AIO/AIO.pm (file contents): Revision 1.222 by root, Fri Apr 6 11:39:25 2012 UTC vs. Revision 1.241 by root, Fri Dec 28 07:33:41 2012 UTC

Diff Legend

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.222 by root, Fri Apr 6 11:39:25 2012 UTC vs.
Revision 1.241 by root, Fri Dec 28 07:33:41 2012 UTC