[ViewVC] Diff of: cvs/IO-AIO/AIO.pm

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.251 by root, Wed Feb 11 19:32:36 2015 UTC vs.
Revision 1.270 by root, Fri Jun 23 03:23:19 2017 UTC

 =head1 NAME
-IO::AIO - Asynchronous Input/Output
+IO::AIO - Asynchronous/Advanced Input/Output
 =head1 SYNOPSIS
  use IO::AIO;
 not well-supported or restricted (GNU/Linux doesn't allow them on normal
 files currently, for example), and they would only support aio_read and
 aio_write, so the remaining functionality would have to be implemented
 using threads anyway.
+In addition to asynchronous I/O, this module also exports some rather
+arcane interfaces, such as C<madvise> or linux's C<splice> system call,
+which is why the C<A> in C<AIO> can also mean I<advanced>.
 Although the module will work in the presence of other (Perl-) threads,
 it is currently not reentrant in any way, so use appropriate locking
 yourself, always call C<poll_cb> from within the same thread, or never
 call C<poll_cb> (or other C<aio_> functions) recursively.
          # file contents now in $contents
          print $contents;
          # exit event loop and program
-         EV::unloop;
+         EV::break;
       };
    };
    # possibly queue up other requests, or open GUI windows,
    # check for sockets etc. etc.
    # process events as long as there are some:
-   EV::loop;
+   EV::run;
 =head1 REQUEST ANATOMY AND LIFETIME
 Every C<aio_*> function creates a request. which is a C data structure not
 directly visible to Perl.
 use common::sense;
 use base 'Exporter';
 BEGIN {
-   our $VERSION = 4.32;
+   our $VERSION = 4.35;
    our @AIO_REQ = qw(aio_sendfile aio_seek aio_read aio_write aio_open aio_close
                      aio_stat aio_lstat aio_unlink aio_rmdir aio_readdir aio_readdirx
-                     aio_scandir aio_symlink aio_readlink aio_realpath aio_sync
+                     aio_scandir aio_symlink aio_readlink aio_realpath aio_fcntl aio_ioctl
-                     aio_fsync aio_syncfs aio_fdatasync aio_sync_file_range aio_allocate
+                     aio_sync aio_fsync aio_syncfs aio_fdatasync aio_sync_file_range
-                     aio_pathsync aio_readahead aio_fiemap
+                     aio_pathsync aio_readahead aio_fiemap aio_allocate
-                     aio_rename aio_link aio_move aio_copy aio_group
+                     aio_rename aio_rename2 aio_link aio_move aio_copy aio_group
                      aio_nop aio_mknod aio_load aio_rmtree aio_mkdir aio_chown
                      aio_chmod aio_utime aio_truncate
                      aio_msync aio_mtouch aio_mlock aio_mlockall
                      aio_statvfs
                      aio_wd);
    aio_link $srcpath, $dstpath, $callback->($status)
    aio_symlink $srcpath, $dstpath, $callback->($status)
    aio_readlink $pathname, $callback->($link)
    aio_realpath $pathname, $callback->($path)
    aio_rename $srcpath, $dstpath, $callback->($status)
+   aio_rename2 $srcpath, $dstpath, $flags, $callback->($status)
    aio_mkdir $pathname, $mode, $callback->($status)
    aio_rmdir $pathname, $callback->($status)
    aio_readdir $pathname, $callback->($entries)
    aio_readdirx $pathname, $flags, $callback->($entries, $flags)
       IO::AIO::READDIR_DENTS IO::AIO::READDIR_DIRS_FIRST
    aio_scandir $pathname, $maxreq, $callback->($dirs, $nondirs)
    aio_load $pathname, $data, $callback->($status)
    aio_copy $srcpath, $dstpath, $callback->($status)
    aio_move $srcpath, $dstpath, $callback->($status)
    aio_rmtree $pathname, $callback->($status)
+   aio_fcntl $fh, $cmd, $arg, $callback->($status)
+   aio_ioctl $fh, $request, $buf, $callback->($status)
    aio_sync $callback->($status)
    aio_syncfs $fh, $callback->($status)
    aio_fsync $fh, $callback->($status)
    aio_fdatasync $fh, $callback->($status)
    aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)
    aio_pathsync $pathname, $callback->($status)
-   aio_msync $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
+   aio_msync $scalar, $offset = 0, $length = undef, flags = MS_SYNC, $callback->($status)
    aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
    aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
    aio_mlockall $flags, $callback->($status)
    aio_group $callback->(...)
    aio_nop $callback->()
 following POSIX and non-POSIX constants are available (missing ones on
 your system are, as usual, C<0>):
 C<O_ASYNC>, C<O_DIRECT>, C<O_NOATIME>, C<O_CLOEXEC>, C<O_NOCTTY>, C<O_NOFOLLOW>,
 C<O_NONBLOCK>, C<O_EXEC>, C<O_SEARCH>, C<O_DIRECTORY>, C<O_DSYNC>,
-C<O_RSYNC>, C<O_SYNC> and C<O_TTY_INIT>.
+C<O_RSYNC>, C<O_SYNC>, C<O_PATH>, C<O_TMPFILE>, and C<O_TTY_INIT>.
 =item aio_close $fh, $callback->($status)
 Asynchronously close a file and call the callback with the result
 =item aio_read  $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
 =item aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
 Reads or writes C<$length> bytes from or to the specified C<$fh> and
-C<$offset> into the scalar given by C<$data> and offset C<$dataoffset>
+C<$offset> into the scalar given by C<$data> and offset C<$dataoffset> and
-and calls the callback without the actual number of bytes read (or -1 on
+calls the callback with the actual number of bytes transferred (or -1 on
 error, just like the syscall).
 C<aio_read> will, like C<sysread>, shrink or grow the C<$data> scalar to
 offset plus the actual number of bytes read.
 As native sendfile syscalls (as practically any non-POSIX interface hacked
 together in a hurry to improve benchmark numbers) tend to be rather buggy
 on many systems, this implementation tries to work around some known bugs
 in Linux and FreeBSD kernels (probably others, too), but that might fail,
 so you really really should check the return value of C<aio_sendfile> -
-fewre bytes than expected might have been transferred.
+fewer bytes than expected might have been transferred.
 =item aio_readahead $fh,$offset,$length, $callback->($retval)
 C<aio_readahead> populates the page cache with data from a file so that
 whole pages, so that offset is effectively rounded down to a page boundary
 and bytes are read up to the next page boundary greater than or equal to
 (off-set+length). C<aio_readahead> does not read beyond the end of the
 file. The current file offset of the file is left unchanged.
-If that syscall doesn't exist (likely if your OS isn't Linux) it will be
+If that syscall doesn't exist (likely if your kernel isn't Linux) it will
-emulated by simply reading the data, which would have a similar effect.
+be emulated by simply reading the data, which would have a similar effect.
 =item aio_stat  $fh_or_path, $callback->($status)
 =item aio_lstat $fh, $callback->($status)
    0x00001373 devfs
    0x00001cd1 devpts
    0x0000f15f ecryptfs
    0x00414a53 efs
    0x0000137d ext
-   0x0000ef53 ext2/ext3
+   0x0000ef53 ext2/ext3/ext4
    0x0000ef51 ext2
+   0xf2f52010 f2fs
    0x00004006 fat
    0x65735546 fuseblk
    0x65735543 fusectl
    0x0bad1dea futexfs
    0x01161970 gfs2
    0x47504653 gpfs
    0x00004244 hfs
    0xf995e849 hpfs
+   0x00c0ffee hostfs
    0x958458f6 hugetlbfs
    0x2bad1dea inotifyfs
    0x00009660 isofs
    0x000072b6 jffs2
    0x3153464a jfs
    0x00009fa1 openprom
    0x7461636F ocfs2
    0x00009fa0 proc
    0x6165676c pstorefs
    0x0000002f qnx4
+   0x68191122 qnx6
    0x858458f6 ramfs
    0x52654973 reiserfs
    0x00007275 romfs
    0x67596969 rpc_pipefs
    0x73636673 securityfs
 =item aio_allocate $fh, $mode, $offset, $len, $callback->($status)
 Allocates or frees disk space according to the C<$mode> argument. See the
 linux C<fallocate> documentation for details.
-C<$mode> can currently be C<0> or C<IO::AIO::FALLOC_FL_KEEP_SIZE>
+C<$mode> is usually C<0> or C<IO::AIO::FALLOC_FL_KEEP_SIZE> to allocate
-to allocate space, or C<IO::AIO::FALLOC_FL_PUNCH_HOLE |
+space, or C<IO::AIO::FALLOC_FL_PUNCH_HOLE | IO::AIO::FALLOC_FL_KEEP_SIZE>,
-IO::AIO::FALLOC_FL_KEEP_SIZE>, to deallocate a file range.
+to deallocate a file range.
+IO::AIO also supports C<FALLOC_FL_COLLAPSE_RANGE>, to remove a range
+(without leaving a hole) and C<FALLOC_FL_ZERO_RANGE>, to zero a range (see
+your L<fallocate(2)> manpage).
 The file system block size used by C<fallocate> is presumably the
 C<f_bsize> returned by C<statvfs>.
 If C<fallocate> isn't available or cannot be emulated (currently no
 rename(2) and call the callback with the result code.
 On systems that support the AIO::WD working directory abstraction
 natively, the case C<[$wd, "."]> as C<$srcpath> is specialcased - instead
 of failing, C<rename> is called on the absolute path of C<$wd>.
+=item aio_rename2 $srcpath, $dstpath, $flags, $callback->($status)
+Basically a version of C<aio_rename> with an additional C<$flags>
+argument. Calling this with C<$flags=0> is the same as calling
+C<aio_rename>.
+Non-zero flags are currently only supported on GNU/Linux systems that
+support renameat2. Other systems fail with C<ENOSYS> in this case.
+The following constants are available (missing ones are, as usual C<0>),
+see renameat2(2) for details:
+C<IO::AIO::RENAME_NOREPLACE>, C<IO::AIO::RENAME_EXCHANGE>
+and C<IO::AIO::RENAME_WHITEOUT>.
 =item aio_mkdir $pathname, $mode, $callback->($status)
 Asynchronously mkdir (create) a directory and call the callback with
    };
    $grp
 }
+=item aio_fcntl $fh, $cmd, $arg, $callback->($status)
+=item aio_ioctl $fh, $request, $buf, $callback->($status)
+These work just like the C<fcntl> and C<ioctl> built-in functions, except
+they execute asynchronously and pass the return value to the callback.
+Both calls can be used for a lot of things, some of which make more sense
+to run asynchronously in their own thread, while some others make less
+sense. For example, calls that block waiting for external events, such
+as locking, will also lock down an I/O thread while it is waiting, which
+can deadlock the whole I/O system. At the same time, there might be no
+alternative to using a thread to wait.
+So in general, you should only use these calls for things that do
+(filesystem) I/O, not for things that wait for other events (network,
+other processes), although if you are careful and know what you are doing,
+you still can.
+The following constants are available (missing ones are, as usual C<0>):
+C<FIFREEZE>, C<FITHAW>, C<FITRIM>, C<FICLONE>, C<FICLONERANGE>, C<FIDEDUPERANGE>.
+C<FS_IOC_GETFLAGS>, C<FS_IOC_SETFLAGS>, C<FS_IOC_GETVERSION>, C<FS_IOC_SETVERSION>,
+C<FS_IOC_FIEMAP>.
+C<FS_IOC_FSGETXATTR>, C<FS_IOC_FSSETXATTR>, C<FS_IOC_SET_ENCRYPTION_POLICY>,
+C<FS_IOC_GET_ENCRYPTION_PWSALT>, C<FS_IOC_GET_ENCRYPTION_POLICY>, C<FS_KEY_DESCRIPTOR_SIZE>.
+C<FS_SECRM_FL>, C<FS_UNRM_FL>, C<FS_COMPR_FL>, C<FS_SYNC_FL>, C<FS_IMMUTABLE_FL>,
+C<FS_APPEND_FL>, C<FS_NODUMP_FL>, C<FS_NOATIME_FL>, C<FS_DIRTY_FL>,
+C<FS_COMPRBLK_FL>, C<FS_NOCOMP_FL>, C<FS_ENCRYPT_FL>, C<FS_BTREE_FL>,
+C<FS_INDEX_FL>, C<FS_JOURNAL_DATA_FL>, C<FS_NOTAIL_FL>, C<FS_DIRSYNC_FL>, C<FS_TOPDIR_FL>,
+C<FS_FL_USER_MODIFIABLE>.
+C<FS_XFLAG_REALTIME>, C<FS_XFLAG_PREALLOC>, C<FS_XFLAG_IMMUTABLE>, C<FS_XFLAG_APPEND>,
+C<FS_XFLAG_SYNC>, C<FS_XFLAG_NOATIME>, C<FS_XFLAG_NODUMP>, C<FS_XFLAG_RTINHERIT>,
+C<FS_XFLAG_PROJINHERIT>, C<FS_XFLAG_NOSYMLINKS>, C<FS_XFLAG_EXTSIZE>, C<FS_XFLAG_EXTSZINHERIT>,
+C<FS_XFLAG_NODEFRAG>, C<FS_XFLAG_FILESTREAM>, C<FS_XFLAG_DAX>, C<FS_XFLAG_HASATTR>,
 =item aio_sync $callback->($status)
 Asynchronously call sync and call the callback when finished.
 =item aio_fsync $fh, $callback->($status)
    };
    $grp
 }
-=item aio_msync $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
+=item aio_msync $scalar, $offset = 0, $length = undef, flags = MS_SYNC, $callback->($status)
 This is a rather advanced IO::AIO call, which only works on mmap(2)ed
 scalars (see the C<IO::AIO::mmap> function, although it also works on data
 scalars managed by the L<Sys::Mmap> or L<Mmap> modules, note that the
 scalar must only be modified in-place while an aio operation is pending on
 It calls the C<msync> function of your OS, if available, with the memory
 area starting at C<$offset> in the string and ending C<$length> bytes
 later. If C<$length> is negative, counts from the end, and if C<$length>
 is C<undef>, then it goes till the end of the string. The flags can be
-a combination of C<IO::AIO::MS_ASYNC>, C<IO::AIO::MS_INVALIDATE> and
+either C<IO::AIO::MS_ASYNC> or C<IO::AIO::MS_SYNC>, plus an optional
-C<IO::AIO::MS_SYNC>.
+C<IO::AIO::MS_INVALIDATE>.
 =item aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
 This is a rather advanced IO::AIO call, which works best on mmap(2)ed
 scalars.
 =item IO::AIO::madvise $scalar, $offset, $len, $advice
 Simply calls the C<posix_madvise> function (see its
 manpage for details). The following advice constants are
 available: C<IO::AIO::MADV_NORMAL>, C<IO::AIO::MADV_SEQUENTIAL>,
-C<IO::AIO::MADV_RANDOM>, C<IO::AIO::MADV_WILLNEED>, C<IO::AIO::MADV_DONTNEED>.
+C<IO::AIO::MADV_RANDOM>, C<IO::AIO::MADV_WILLNEED>, C<IO::AIO::MADV_DONTNEED>,
+C<IO::AIO::MADV_FREE>.
+If C<$offset> is negative, counts from the end. If C<$length> is negative,
+the remaining length of the C<$scalar> is used. If possible, C<$length>
+will be reduced to fit into the C<$scalar>.
 On systems that do not implement C<posix_madvise>, this function returns
 ENOSYS, otherwise the return value of C<posix_madvise>.
 =item IO::AIO::mprotect $scalar, $offset, $len, $protect
 Simply calls the C<mprotect> function on the preferably AIO::mmap'ed
 $scalar (see its manpage for details). The following protect
 constants are available: C<IO::AIO::PROT_NONE>, C<IO::AIO::PROT_READ>,
 C<IO::AIO::PROT_WRITE>, C<IO::AIO::PROT_EXEC>.
+If C<$offset> is negative, counts from the end. If C<$length> is negative,
+the remaining length of the C<$scalar> is used. If possible, C<$length>
+will be reduced to fit into the C<$scalar>.
 On systems that do not implement C<mprotect>, this function returns
 ENOSYS, otherwise the return value of C<mprotect>.
 =item IO::AIO::mmap $scalar, $length, $prot, $flags, $fh[, $offset]
 Memory-maps a file (or anonymous memory range) and attaches it to the
 given C<$scalar>, which will act like a string scalar. Returns true on
 success, and false otherwise.
+The scalar must exist, but its contents do not matter - this means you
+cannot use a nonexistant array or hash element. When in doubt, C<undef>
+the scalar first.
-The only operations allowed on the scalar are C<substr>/C<vec> that don't
+The only operations allowed on the mmapped scalar are C<substr>/C<vec>,
-change the string length, and most read-only operations such as copying it
+which don't change the string length, and most read-only operations such
-or searching it with regexes and so on.
+as copying it or searching it with regexes and so on.
 Anything else is unsafe and will, at best, result in memory leaks.
 The memory map associated with the C<$scalar> is automatically removed
-when the C<$scalar> is destroyed, or when the C<IO::AIO::mmap> or
+when the C<$scalar> is undef'd or destroyed, or when the C<IO::AIO::mmap>
-C<IO::AIO::munmap> functions are called.
+or C<IO::AIO::munmap> functions are called on it.
 This calls the C<mmap>(2) function internally. See your system's manual
 page for details on the C<$length>, C<$prot> and C<$flags> parameters.
 The C<$length> must be larger than zero and smaller than the actual
 filesize.
 C<$prot> is a combination of C<IO::AIO::PROT_NONE>, C<IO::AIO::PROT_EXEC>,
 C<IO::AIO::PROT_READ> and/or C<IO::AIO::PROT_WRITE>,
-C<$flags> can be a combination of C<IO::AIO::MAP_SHARED> or
+C<$flags> can be a combination of
-C<IO::AIO::MAP_PRIVATE>, or a number of system-specific flags (when
+C<IO::AIO::MAP_SHARED> or
-not available, the are defined as 0): C<IO::AIO::MAP_ANONYMOUS>
+C<IO::AIO::MAP_PRIVATE>,
+or a number of system-specific flags (when not available, the are C<0>):
-(which is set to C<MAP_ANON> if your system only provides this
+C<IO::AIO::MAP_ANONYMOUS> (which is set to C<MAP_ANON> if your system only provides this constant),
-constant), C<IO::AIO::MAP_HUGETLB>, C<IO::AIO::MAP_LOCKED>,
+C<IO::AIO::MAP_LOCKED>,
-C<IO::AIO::MAP_NORESERVE>, C<IO::AIO::MAP_POPULATE> or
+C<IO::AIO::MAP_NORESERVE>,
+C<IO::AIO::MAP_POPULATE>,
-C<IO::AIO::MAP_NONBLOCK>
+C<IO::AIO::MAP_NONBLOCK>,
+C<IO::AIO::MAP_FIXED>,
+C<IO::AIO::MAP_GROWSDOWN>,
+C<IO::AIO::MAP_32BIT>,
+C<IO::AIO::MAP_HUGETLB> or
+C<IO::AIO::MAP_STACK>.
 If C<$fh> is C<undef>, then a file descriptor of C<-1> is passed.
 C<$offset> is the offset from the start of the file - it generally must be
 a multiple of C<IO::AIO::PAGESIZE> and defaults to C<0>.
 Attempts to query or change the pipe buffer size. Obviously works only
 on pipes, and currently works only on GNU/Linux systems, and fails with
 C<-1>/C<ENOSYS> everywhere else. If anybody knows how to influence pipe buffer
 size on other systems, drop me a note.
+=item ($rfh, $wfh) = IO::AIO::pipe2 [$flags]
+This is a direct interface to the Linux L<pipe2(2)> system call. If
+C<$flags> is missing or C<0>, then this should be the same as a call to
+perl's built-in C<pipe> function and create a new pipe, and works on
+systems that lack the pipe2 syscall. On win32, this case invokes C<_pipe
+(..., 4096, O_BINARY)>.
+If C<$flags> is non-zero, it tries to invoke the pipe2 system call with
+the given flags (Linux 2.6.27, glibc 2.9).
+On success, the read and write file handles are returned.
+On error, nothing will be returned. If the pipe2 syscall is missing and
+C<$flags> is non-zero, fails with C<ENOSYS>.
+Please refer to L<pipe2(2)> for more info on the C<$flags>, but at the
+time of this writing, C<IO::AIO::O_CLOEXEC>, C<IO::AIO::O_NONBLOCK> and
+C<IO::AIO::O_DIRECT> (Linux 3.4, for packet-based pipes) were supported.
 =back
 =cut

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing IO-AIO/AIO.pm (file contents): Revision 1.251 by root, Wed Feb 11 19:32:36 2015 UTC vs. Revision 1.270 by root, Fri Jun 23 03:23:19 2017 UTC

Diff Legend

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.251 by root, Wed Feb 11 19:32:36 2015 UTC vs.
Revision 1.270 by root, Fri Jun 23 03:23:19 2017 UTC