[ViewVC] Diff of: cvs/IO-AIO/AIO.pm

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.85 by root, Sat Oct 28 01:40:30 2006 UTC vs.
Revision 1.144 by root, Sun Apr 19 19:17:59 2009 UTC

 =head1 SYNOPSIS
  use IO::AIO;
  aio_open "/etc/passwd", O_RDONLY, 0, sub {
-    my ($fh) = @_;
+    my $fh = shift
+       or die "/etc/passwd: $!";
     ...
  };
  aio_unlink "/tmp/file", sub { };
  $req->cancel; # cancel request if still in queue
  my $grp = aio_group sub { print "all stats done\n" };
  add $grp aio_stat "..." for ...;
+ # AnyEvent integration (EV, Event, Glib, Tk, POE, urxvt, pureperl...)
+ use AnyEvent::AIO;
- # AnyEvent integration
+ # EV integration
- open my $fh, "<&=" . IO::AIO::poll_fileno or die "$!";
+ my $w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
- my $w = AnyEvent->io (fh => $fh, poll => 'r', cb => sub { IO::AIO::poll_cb });
  # Event integration
  Event->io (fd => IO::AIO::poll_fileno,
             poll => 'r',
             cb => \&IO::AIO::poll_cb);
 etc.), but can also be used to easily do operations in parallel that are
 normally done sequentially, e.g. stat'ing many files, which is much faster
 on a RAID volume or over NFS when you do a number of stat operations
 concurrently.
-While this works on all types of file descriptors (for example sockets),
+While most of this works on all types of file descriptors (for
-using these functions on file descriptors that support nonblocking
+example sockets), using these functions on file descriptors that
-operation (again, sockets, pipes etc.) is very inefficient. Use an event
+support nonblocking operation (again, sockets, pipes etc.) is very
-loop for that (such as the L<Event|Event> module): IO::AIO will naturally
+inefficient. Use an event loop for that (such as the L<Event|Event>
-fit into such an event loop itself.
+module): IO::AIO will naturally fit into such an event loop itself.
 In this version, a number of threads are started that execute your
 requests and signal their completion. You don't need thread support
 in perl, and the threads created by this module will not be visible
 to perl. In the future, this module might make use of the native aio
 not well-supported or restricted (GNU/Linux doesn't allow them on normal
 files currently, for example), and they would only support aio_read and
 aio_write, so the remaining functionality would have to be implemented
 using threads anyway.
-Although the module will work with in the presence of other (Perl-)
+Although the module will work in the presence of other (Perl-) threads,
-threads, it is currently not reentrant in any way, so use appropriate
+it is currently not reentrant in any way, so use appropriate locking
-locking yourself, always call C<poll_cb> from within the same thread, or
+yourself, always call C<poll_cb> from within the same thread, or never
-never call C<poll_cb> (or other C<aio_> functions) recursively.
+call C<poll_cb> (or other C<aio_> functions) recursively.
+=head2 EXAMPLE
+This is a simple example that uses the Event module and loads
+F</etc/passwd> asynchronously:
+   use Fcntl;
+   use Event;
+   use IO::AIO;
+   # register the IO::AIO callback with Event
+   Event->io (fd => IO::AIO::poll_fileno,
+              poll => 'r',
+              cb => \&IO::AIO::poll_cb);
+   # queue the request to open /etc/passwd
+   aio_open "/etc/passwd", O_RDONLY, 0, sub {
+      my $fh = shift
+         or die "error while opening: $!";
+      # stat'ing filehandles is generally non-blocking
+      my $size = -s $fh;
+      # queue a request to read the file
+      my $contents;
+      aio_read $fh, 0, $size, $contents, 0, sub {
+         $_[0] == $size
+            or die "short read: $!";
+         close $fh;
+         # file contents now in $contents
+         print $contents;
+         # exit event loop and program
+         Event::unloop;
+      };
+   };
+   # possibly queue up other requests, or open GUI windows,
+   # check for sockets etc. etc.
+   # process events as long as there are some:
+   Event::loop;
 =head1 REQUEST ANATOMY AND LIFETIME
 Every C<aio_*> function creates a request. which is a C data structure not
 directly visible to Perl.
 Request has reached the end of its lifetime and holds no resources anymore
 (except possibly for the Perl object, but its connection to the actual
 aio request is severed and calling its methods will either do nothing or
 result in a runtime error).
+=back
 =cut
 package IO::AIO;
+use Carp ();
 no warnings;
 use strict 'vars';
 use base 'Exporter';
 BEGIN {
-   our $VERSION = '2.0';
+   our $VERSION = '3.18';
-   our @AIO_REQ = qw(aio_sendfile aio_read aio_write aio_open aio_close aio_stat
+   our @AIO_REQ = qw(aio_sendfile aio_read aio_write aio_open aio_close
-                     aio_lstat aio_unlink aio_rmdir aio_readdir aio_scandir aio_symlink
+                     aio_stat aio_lstat aio_unlink aio_rmdir aio_readdir
-                     aio_fsync aio_fdatasync aio_readahead aio_rename aio_link aio_move
+                     aio_scandir aio_symlink aio_readlink aio_sync aio_fsync
-                     aio_copy aio_group aio_nop aio_mknod);
+                     aio_fdatasync aio_sync_file_range aio_pathsync aio_readahead
+                     aio_rename aio_link aio_move aio_copy aio_group
+                     aio_nop aio_mknod aio_load aio_rmtree aio_mkdir aio_chown
+                     aio_chmod aio_utime aio_truncate);
    our @EXPORT = (@AIO_REQ, qw(aioreq_pri aioreq_nice));
    our @EXPORT_OK = qw(poll_fileno poll_cb poll_wait flush
-                       min_parallel max_parallel nreqs nready npending);
+                       min_parallel max_parallel max_idle
+                       nreqs nready npending nthreads
+                       max_poll_time max_poll_reqs);
+   push @AIO_REQ, qw(aio_busy); # not exported
    @IO::AIO::GRP::ISA = 'IO::AIO::REQ';
    require XSLoader;
    XSLoader::load ("IO::AIO", $VERSION);
 }
 =head1 FUNCTIONS
-=head2 AIO FUNCTIONS
+=head2 AIO REQUEST FUNCTIONS
 All the C<aio_*> calls are more or less thin wrappers around the syscall
 with the same name (sans C<aio_>). The arguments are similar or identical,
 and they all accept an additional (and optional) C<$callback> argument
 which must be a code reference. This code reference will get called with
 the syscall return code (e.g. most syscalls return C<-1> on error, unlike
-perl, which usually delivers "false") as it's sole argument when the given
+perl, which usually delivers "false") as its sole argument after the given
 syscall has been executed asynchronously.
 All functions expecting a filehandle keep a copy of the filehandle
 internally until the request has finished.
-All requests return objects of type L<IO::AIO::REQ> that allow further
+All functions return request objects of type L<IO::AIO::REQ> that allow
-manipulation of those requests while they are in-flight.
+further manipulation of those requests while they are in-flight.
 The pathnames you pass to these routines I<must> be absolute and
-encoded in byte form. The reason for the former is that at the time the
+encoded as octets. The reason for the former is that at the time the
 request is being executed, the current working directory could have
 changed. Alternatively, you can make sure that you never change the
-current working directory.
+current working directory anywhere in the program and then use relative
+paths.
-To encode pathnames to byte form, either make sure you either: a)
+To encode pathnames as octets, either make sure you either: a) always pass
-always pass in filenames you got from outside (command line, readdir
+in filenames you got from outside (command line, readdir etc.) without
-etc.), b) are ASCII or ISO 8859-1, c) use the Encode module and encode
+tinkering, b) are ASCII or ISO 8859-1, c) use the Encode module and encode
 your pathnames to the locale (or other) encoding in effect in the user
 environment, d) use Glib::filename_from_unicode on unicode filenames or e)
-use something else.
+use something else to ensure your scalar has the correct contents.
+This works, btw. independent of the internal UTF-8 bit, which IO::AIO
+handles correctly whether it is set or not.
 =over 4
 =item $prev_pri = aioreq_pri [$pri]
       aio_read $_[0], ..., sub {
          ...
       };
    };
 =item aioreq_nice $pri_adjust
 Similar to C<aioreq_pri>, but subtracts the given value from the current
-priority, so effects are cumulative.
+priority, so the effect is cumulative.
 =item aio_open $pathname, $flags, $mode, $callback->($fh)
 Asynchronously open or create a file and call the callback with a newly
 created filehandle for the file.
 list. They are the same as used by C<sysopen>.
 Likewise, C<$mode> specifies the mode of the newly created file, if it
 didn't exist and C<O_CREAT> has been given, just like perl's C<sysopen>,
 except that it is mandatory (i.e. use C<0> if you don't create new files,
-and C<0666> or C<0777> if you do).
+and C<0666> or C<0777> if you do). Note that the C<$mode> will be modified
+by the umask in effect then the request is being executed, so better never
+change the umask.
 Example:
    aio_open "/etc/passwd", O_RDONLY, 0, sub {
       if ($_[0]) {
       } else {
          die "open failed: $!\n";
       }
    };
 =item aio_close $fh, $callback->($status)
 Asynchronously close a file and call the callback with the result
-code. I<WARNING:> although accepted, you should not pass in a perl
+code.
-filehandle here, as perl will likely close the file descriptor another
-time when the filehandle is destroyed. Normally, you can safely call perls
-C<close> or just let filehandles go out of scope.
-This is supposed to be a bug in the API, so that might change. It's
+Unfortunately, you can't do this to perl. Perl I<insists> very strongly on
-therefore best to avoid this function.
+closing the file descriptor associated with the filehandle itself.
+Therefore, C<aio_close> will not close the filehandle - instead it will
+use dup2 to overwrite the file descriptor with the write-end of a pipe
+(the pipe fd will be created on demand and will be cached).
+Or in other words: the file descriptor will be closed, but it will not be
+free for reuse until the perl filehandle is closed.
+=cut
 =item aio_read  $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
 =item aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
-Reads or writes C<length> bytes from the specified C<fh> and C<offset>
+Reads or writes C<$length> bytes from the specified C<$fh> and C<$offset>
-into the scalar given by C<data> and offset C<dataoffset> and calls the
+into the scalar given by C<$data> and offset C<$dataoffset> and calls the
 callback without the actual number of bytes read (or -1 on error, just
 like the syscall).
+If C<$offset> is undefined, then the current file descriptor offset will
+be used (and updated), otherwise the file descriptor offset will not be
+changed by these calls.
+If C<$length> is undefined in C<aio_write>, use the remaining length of C<$data>.
+If C<$dataoffset> is less than zero, it will be counted from the end of
+C<$data>.
 The C<$data> scalar I<MUST NOT> be modified in any way while the request
-is outstanding. Modifying it can result in segfaults or WW3 (if the
+is outstanding. Modifying it can result in segfaults or World War III (if
-necessary/optional hardware is installed).
+the necessary/optional hardware is installed).
 Example: Read 15 bytes at offset 7 into scalar C<$buffer>, starting at
 offset C<0> within the scalar:
    aio_read $fh, 7, 15, $buffer, 0, sub {
       $_[0] > 0 or die "read error: $!";
       print "read $_[0] bytes: <$buffer>\n";
    };
 =item aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval)
 Tries to copy C<$length> bytes from C<$in_fh> to C<$out_fh>. It starts
 reading at byte offset C<$in_offset>, and starts writing at the current
 C<$in_fh> than are written, and there is no way to find out how many
 bytes have been read from C<aio_sendfile> alone, as C<aio_sendfile> only
 provides the number of bytes written to C<$out_fh>. Only if the result
 value equals C<$length> one can assume that C<$length> bytes have been
 read.
 =item aio_readahead $fh,$offset,$length, $callback->($retval)
 C<aio_readahead> populates the page cache with data from a file so that
 subsequent reads from that file will not block on disk I/O. The C<$offset>
 file. The current file offset of the file is left unchanged.
 If that syscall doesn't exist (likely if your OS isn't Linux) it will be
 emulated by simply reading the data, which would have a similar effect.
 =item aio_stat  $fh_or_path, $callback->($status)
 =item aio_lstat $fh, $callback->($status)
 Works like perl's C<stat> or C<lstat> in void context. The callback will
    aio_stat "/etc/passwd", sub {
       $_[0] and die "stat failed: $!";
       print "size is ", -s _, "\n";
    };
+=item aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
+Works like perl's C<utime> function (including the special case of $atime
+and $mtime being undef). Fractional times are supported if the underlying
+syscalls support them.
+When called with a pathname, uses utimes(2) if available, otherwise
+utime(2). If called on a file descriptor, uses futimes(2) if available,
+otherwise returns ENOSYS, so this is not portable.
+Examples:
+   # set atime and mtime to current time (basically touch(1)):
+   aio_utime "path", undef, undef;
+   # set atime to current time and mtime to beginning of the epoch:
+   aio_utime "path", time, undef; # undef==0
+=item aio_chown $fh_or_path, $uid, $gid, $callback->($status)
+Works like perl's C<chown> function, except that C<undef> for either $uid
+or $gid is being interpreted as "do not change" (but -1 can also be used).
+Examples:
+   # same as "chown root path" in the shell:
+   aio_chown "path", 0, -1;
+   # same as above:
+   aio_chown "path", 0, undef;
+=item aio_truncate $fh_or_path, $offset, $callback->($status)
+Works like truncate(2) or ftruncate(2).
+=item aio_chmod $fh_or_path, $mode, $callback->($status)
+Works like perl's C<chmod> function.
 =item aio_unlink $pathname, $callback->($status)
 Asynchronously unlink (delete) a file and call the callback with the
 result code.
 =item aio_mknod $path, $mode, $dev, $callback->($status)
+[EXPERIMENTAL]
 Asynchronously create a device node (or fifo). See mknod(2).
-The only portable (POSIX) way of calling this function is:
+The only (POSIX-) portable way of calling this function is:
    aio_mknod $path, IO::AIO::S_IFIFO | $mode, 0, sub { ...
 =item aio_link $srcpath, $dstpath, $callback->($status)
 Asynchronously create a new link to the existing object at C<$srcpath> at
 the path C<$dstpath> and call the callback with the result code.
 =item aio_symlink $srcpath, $dstpath, $callback->($status)
 Asynchronously create a new symbolic link to the existing object at C<$srcpath> at
 the path C<$dstpath> and call the callback with the result code.
+=item aio_readlink $path, $callback->($link)
+Asynchronously read the symlink specified by C<$path> and pass it to
+the callback. If an error occurs, nothing or undef gets passed to the
+callback.
 =item aio_rename $srcpath, $dstpath, $callback->($status)
 Asynchronously rename the object at C<$srcpath> to C<$dstpath>, just as
 rename(2) and call the callback with the result code.
+=item aio_mkdir $pathname, $mode, $callback->($status)
+Asynchronously mkdir (create) a directory and call the callback with
+the result code. C<$mode> will be modified by the umask at the time the
+request is executed, so do not change your umask.
 =item aio_rmdir $pathname, $callback->($status)
 Asynchronously rmdir (delete) a directory and call the callback with the
 result code.
 =item aio_readdir $pathname, $callback->($entries)
 Unlike the POSIX call of the same name, C<aio_readdir> reads an entire
 directory (i.e. opendir + readdir + closedir). The entries will not be
 sorted, and will B<NOT> include the C<.> and C<..> entries.
 The callback a single argument which is either C<undef> or an array-ref
 with the filenames.
+=item aio_load $path, $data, $callback->($status)
+This is a composite request that tries to fully load the given file into
+memory. Status is the same as with aio_read.
+=cut
+sub aio_load($$;$) {
+   my ($path, undef, $cb) = @_;
+   my $data = \$_[1];
+   my $pri = aioreq_pri;
+   my $grp = aio_group $cb;
+   aioreq_pri $pri;
+   add $grp aio_open $path, O_RDONLY, 0, sub {
+      my $fh = shift
+         or return $grp->result (-1);
+      aioreq_pri $pri;
+      add $grp aio_read $fh, 0, (-s $fh), $$data, 0, sub {
+         $grp->result ($_[0]);
+      };
+   };
+   $grp
+}
 =item aio_copy $srcpath, $dstpath, $callback->($status)
 Try to copy the I<file> (directories not supported as either source or
 destination) from C<$srcpath> to C<$dstpath> and call the callback with
 the C<0> (error) or C<-1> ok.
-This is a composite request that it creates the destination file with
+This is a composite request that creates the destination file with
 mode 0200 and copies the contents of the source file into it using
 C<aio_sendfile>, followed by restoring atime, mtime, access mode and
 uid/gid, in that order.
 If an error occurs, the partial destination file will be unlinked, if
                      # those should not normally block. should. should.
                      utime $stat[8], $stat[9], $dst;
                      chmod $stat[2] & 07777, $dst_fh;
                      chown $stat[4], $stat[5], $dst_fh;
+                     aioreq_pri $pri;
-                     close $dst_fh;
+                     add $grp aio_close $dst_fh;
                   } else {
                      $grp->result (-1);
                      close $src_fh;
                      close $dst_fh;
 Try to move the I<file> (directories not supported as either source or
 destination) from C<$srcpath> to C<$dstpath> and call the callback with
 the C<0> (error) or C<-1> ok.
-This is a composite request that tries to rename(2) the file first. If
+This is a composite request that tries to rename(2) the file first; if
-rename files with C<EXDEV>, it copies the file with C<aio_copy> and, if
+rename fails with C<EXDEV>, it copies the file with C<aio_copy> and, if
-that is successful, unlinking the C<$srcpath>.
+that is successful, unlinks the C<$srcpath>.
 =cut
 sub aio_move($$;$) {
    my ($src, $dst, $cb) = @_;
 as those tend to return 0 or 1 as link counts, which disables the
 directory counting heuristic.
 =cut
-sub aio_scandir($$$) {
+sub aio_scandir($$;$) {
    my ($path, $maxreq, $cb) = @_;
    my $pri = aioreq_pri;
    my $grp = aio_group $cb;
    };
    $grp
 }
+=item aio_rmtree $path, $callback->($status)
+Delete a directory tree starting (and including) C<$path>, return the
+status of the final C<rmdir> only.  This is a composite request that
+uses C<aio_scandir> to recurse into and rmdir directories, and unlink
+everything else.
+=cut
+sub aio_rmtree;
+sub aio_rmtree($;$) {
+   my ($path, $cb) = @_;
+   my $pri = aioreq_pri;
+   my $grp = aio_group $cb;
+   aioreq_pri $pri;
+   add $grp aio_scandir $path, 0, sub {
+      my ($dirs, $nondirs) = @_;
+      my $dirgrp = aio_group sub {
+         add $grp aio_rmdir $path, sub {
+            $grp->result ($_[0]);
+         };
+      };
+      (aioreq_pri $pri), add $dirgrp aio_rmtree "$path/$_" for @$dirs;
+      (aioreq_pri $pri), add $dirgrp aio_unlink "$path/$_" for @$nondirs;
+      add $grp $dirgrp;
+   };
+   $grp
+}
+=item aio_sync $callback->($status)
+Asynchronously call sync and call the callback when finished.
 =item aio_fsync $fh, $callback->($status)
 Asynchronously call fsync on the given filehandle and call the callback
 with the fsync result code.
 Asynchronously call fdatasync on the given filehandle and call the
 callback with the fdatasync result code.
 If this call isn't available because your OS lacks it or it couldn't be
 detected, it will be emulated by calling C<fsync> instead.
+=item aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)
+Sync the data portion of the file specified by C<$offset> and C<$length>
+to disk (but NOT the metadata), by calling the Linux-specific
+sync_file_range call. If sync_file_range is not available or it returns
+ENOSYS, then fdatasync or fsync is being substituted.
+C<$flags> can be a combination of C<IO::AIO::SYNC_FILE_RANGE_WAIT_BEFORE>,
+C<IO::AIO::SYNC_FILE_RANGE_WRITE> and
+C<IO::AIO::SYNC_FILE_RANGE_WAIT_AFTER>: refer to the sync_file_range
+manpage for details.
+=item aio_pathsync $path, $callback->($status)
+This request tries to open, fsync and close the given path. This is a
+composite request intended to sync directories after directory operations
+(E.g. rename). This might not work on all operating systems or have any
+specific effect, but usually it makes sure that directory changes get
+written to disc. It works for anything that can be opened for read-only,
+not just directories.
+Passes C<0> when everything went ok, and C<-1> on error.
+=cut
+sub aio_pathsync($;$) {
+   my ($path, $cb) = @_;
+   my $pri = aioreq_pri;
+   my $grp = aio_group $cb;
+   aioreq_pri $pri;
+   add $grp aio_open $path, O_RDONLY, 0, sub {
+      my ($fh) = @_;
+      if ($fh) {
+         aioreq_pri $pri;
+         add $grp aio_fsync $fh, sub {
+            $grp->result ($_[0]);
+            aioreq_pri $pri;
+            add $grp aio_close $fh;
+         };
+      } else {
+         $grp->result (-1);
+      }
+   };
+   $grp
+}
 =item aio_group $callback->(...)
 This is a very special aio request: Instead of doing something, it is a
 container for other aio requests, which is useful if you want to bundle
 Their lifetime, simplified, looks like this: when they are empty, they
 will finish very quickly. If they contain only requests that are in the
 C<done> state, they will also finish. Otherwise they will continue to
 exist.
-That means after creating a group you have some time to add requests. And
+That means after creating a group you have some time to add requests
-in the callbacks of those requests, you can add further requests to the
+(precisely before the callback has been invoked, which is only done within
-group. And only when all those requests have finished will the the group
+the C<poll_cb>). And in the callbacks of those requests, you can add
-itself finish.
+further requests to the group. And only when all those requests have
+finished will the the group itself finish.
 =over 4
 =item add $grp ...
 itself. Useful when you queued a lot of events but got a result early.
 =item $grp->result (...)
 Set the result value(s) that will be passed to the group callback when all
-subrequests have finished and set thre groups errno to the current value
+subrequests have finished and set the groups errno to the current value
 of errno (just like calling C<errno> without an error number). By default,
 no argument will be passed and errno is zero.
 =item $grp->errno ([$errno])
 =item feed $grp $callback->($grp)
 Sets a feeder/generator on this group: every group can have an attached
 generator that generates requests if idle. The idea behind this is that,
 although you could just queue as many requests as you want in a group,
-this might starve other requests for a potentially long time.  For
+this might starve other requests for a potentially long time. For example,
-example, C<aio_scandir> might generate hundreds of thousands C<aio_stat>
+C<aio_scandir> might generate hundreds of thousands C<aio_stat> requests,
-requests, delaying any later requests for a long time.
+delaying any later requests for a long time.
 To avoid this, and allow incremental generation of requests, you can
 instead a group and set a feeder on it that generates those requests. The
 feed callback will be called whenever there are few enough (see C<limit>,
 below) requests active in the group itself and is expected to queue more
 not impose any limits).
 If the feed does not queue more requests when called, it will be
 automatically removed from the group.
-If the feed limit is C<0>, it will be set to C<2> automatically.
+If the feed limit is C<0> when this method is called, it will be set to
+C<2> automatically.
 Example:
    # stat all files in @files, but only ever use four aio requests concurrently:
 Sets the feeder limit for the group: The feeder will be called whenever
 the group contains less than this many requests.
 Setting the limit to C<0> will pause the feeding process.
+The default value for the limit is C<0>, but note that setting a feeder
+automatically bumps it up to C<2>.
 =back
 =head2 SUPPORT FUNCTIONS
+=head3 EVENT PROCESSING AND EVENT LOOP INTEGRATION
 =over 4
 =item $fileno = IO::AIO::poll_fileno
 See C<poll_cb> for an example.
 =item IO::AIO::poll_cb
-Process all outstanding events on the result pipe. You have to call this
+Process some outstanding events on the result pipe. You have to call this
-regularly. Returns the number of events processed. Returns immediately
+regularly. Returns C<0> if all events could be processed, or C<-1> if it
-when no events are outstanding.
+returned earlier for whatever reason. Returns immediately when no events
+are outstanding. The amount of events processed depends on the settings of
+C<IO::AIO::max_poll_req> and C<IO::AIO::max_poll_time>.
 If not all requests were processed for whatever reason, the filehandle
-will still be ready when C<poll_cb> returns.
+will still be ready when C<poll_cb> returns, so normally you don't have to
+do anything special to have it called later.
 Example: Install an Event watcher that automatically calls
 IO::AIO::poll_cb with high priority:
    Event->io (fd => IO::AIO::poll_fileno,
               poll => 'r', async => 1,
               cb => \&IO::AIO::poll_cb);
-=item IO::AIO::poll_some $max_requests
+=item IO::AIO::max_poll_reqs $nreqs
-Similar to C<poll_cb>, but only processes up to C<$max_requests> requests
+=item IO::AIO::max_poll_time $seconds
-at a time.
-Useful if you want to ensure some level of interactiveness when perl is
+These set the maximum number of requests (default C<0>, meaning infinity)
-not fast enough to process all requests in time.
+that are being processed by C<IO::AIO::poll_cb> in one call, respectively
+the maximum amount of time (default C<0>, meaning infinity) spent in
+C<IO::AIO::poll_cb> to process requests (more correctly the mininum amount
+of time C<poll_cb> is allowed to use).
+Setting C<max_poll_time> to a non-zero value creates an overhead of one
+syscall per request processed, which is not normally a problem unless your
+callbacks are really really fast or your OS is really really slow (I am
+not mentioning Solaris here). Using C<max_poll_reqs> incurs no overhead.
+Setting these is useful if you want to ensure some level of
+interactiveness when perl is not fast enough to process all requests in
+time.
+For interactive programs, values such as C<0.01> to C<0.1> should be fine.
 Example: Install an Event watcher that automatically calls
-IO::AIO::poll_some with low priority, to ensure that other parts of the
+IO::AIO::poll_cb with low priority, to ensure that other parts of the
 program get the CPU sometimes even under high AIO load.
+   # try not to spend much more than 0.1s in poll_cb
+   IO::AIO::max_poll_time 0.1;
+   # use a low priority so other tasks have priority
    Event->io (fd => IO::AIO::poll_fileno,
               poll => 'r', nice => 1,
-              cb => sub { IO::AIO::poll_some 256 });
+              cb => &IO::AIO::poll_cb);
 =item IO::AIO::poll_wait
+If there are any outstanding requests and none of them in the result
-Wait till the result filehandle becomes ready for reading (simply does a
+phase, wait till the result filehandle becomes ready for reading (simply
-C<select> on the filehandle. This is useful if you want to synchronously wait
+does a C<select> on the filehandle. This is useful if you want to
-for some requests to finish).
+synchronously wait for some requests to finish).
 See C<nreqs> for an example.
+=item IO::AIO::poll
+Waits until some requests have been handled.
+Returns the number of requests processed, but is otherwise strictly
+equivalent to:
+   IO::AIO::poll_wait, IO::AIO::poll_cb
-=item IO::AIO::nreqs
+=item IO::AIO::flush
-Returns the number of requests currently in the ready, execute or pending
+Wait till all outstanding AIO requests have been handled.
-states (i.e. for which their callback has not been invoked yet).
-Example: wait till there are no outstanding requests anymore:
+Strictly equivalent to:
    IO::AIO::poll_wait, IO::AIO::poll_cb
       while IO::AIO::nreqs;
-=item IO::AIO::nready
+=back
-Returns the number of requests currently in the ready state (not yet
+=head3 CONTROLLING THE NUMBER OF THREADS
-executed).
-=item IO::AIO::npending
+=over
-Returns the number of requests currently in the pending state (executed,
-but not yet processed by poll_cb).
-=item IO::AIO::flush
-Wait till all outstanding AIO requests have been handled.
-Strictly equivalent to:
-   IO::AIO::poll_wait, IO::AIO::poll_cb
-      while IO::AIO::nreqs;
-=item IO::AIO::poll
-Waits until some requests have been handled.
-Strictly equivalent to:
-   IO::AIO::poll_wait, IO::AIO::poll_cb
-      if IO::AIO::nreqs;
 =item IO::AIO::min_parallel $nthreads
 Set the minimum number of AIO threads to C<$nthreads>. The current
 default is C<8>, which means eight asynchronous operations can execute
 concurrently at any one time (the number of outstanding requests,
 however, is unlimited).
 IO::AIO starts threads only on demand, when an AIO request is queued and
-no free thread exists.
+no free thread exists. Please note that queueing up a hundred requests can
+create demand for a hundred threads, even if it turns out that everything
+is in the cache and could have been processed faster by a single thread.
 It is recommended to keep the number of threads relatively low, as some
 Linux kernel versions will scale negatively with the number of threads
 (higher parallelity => MUCH higher latency). With current Linux 2.6
 versions, 4-32 threads should be fine.
 This module automatically runs C<max_parallel 0> at program end, to ensure
 that all threads are killed and that there are no outstanding requests.
 Under normal circumstances you don't need to call this function.
+=item IO::AIO::max_idle $nthreads
+Limit the number of threads (default: 4) that are allowed to idle (i.e.,
+threads that did not get a request to process within 10 seconds). That
+means if a thread becomes idle while C<$nthreads> other threads are also
+idle, it will free its resources and exit.
+This is useful when you allow a large number of threads (e.g. 100 or 1000)
+to allow for extremely high load situations, but want to free resources
+under normal circumstances (1000 threads can easily consume 30MB of RAM).
+The default is probably ok in most situations, especially if thread
+creation is fast. If thread creation is very slow on your system you might
+want to use larger values.
-=item $oldmaxreqs = IO::AIO::max_outstanding $maxreqs
+=item IO::AIO::max_outstanding $maxreqs
 This is a very bad function to use in interactive programs because it
 blocks, and a bad way to reduce concurrency because it is inexact: Better
 use an C<aio_group> together with a feed callback.
 Sets the maximum number of outstanding requests to C<$nreqs>. If you
-to queue up more than this number of requests, the next call to the
+do queue up more than this number of requests, the next call to the
 C<poll_cb> (and C<poll_some> and other functions calling C<poll_cb>)
 function will block until the limit is no longer exceeded.
 The default value is very large, so there is no practical limit on the
 number of outstanding requests.
 You can still queue as many requests as you want. Therefore,
-C<max_oustsanding> is mainly useful in simple scripts (with low values) or
+C<max_outstanding> is mainly useful in simple scripts (with low values) or
 as a stop gap to shield against fatal memory overflow (with large values).
 =back
+=head3 STATISTICAL INFORMATION
+=over
+=item IO::AIO::nreqs
+Returns the number of requests currently in the ready, execute or pending
+states (i.e. for which their callback has not been invoked yet).
+Example: wait till there are no outstanding requests anymore:
+   IO::AIO::poll_wait, IO::AIO::poll_cb
+      while IO::AIO::nreqs;
+=item IO::AIO::nready
+Returns the number of requests currently in the ready state (not yet
+executed).
+=item IO::AIO::npending
+Returns the number of requests currently in the pending state (executed,
+but not yet processed by poll_cb).
+=back
 =cut
-# support function to convert a fd into a perl filehandle
-sub _fd2fh {
-   return undef if $_[0] < 0;
-   # try to generate nice filehandles
-   my $sym = "IO::AIO::fd#$_[0]";
-   local *$sym;
-   open *$sym, "+<&=$_[0]"      # usually works under any unix
-      or open *$sym, "<&=$_[0]" # cygwin needs this
-      or open *$sym, ">&=$_[0]" # or this
-      or return undef;
-   *$sym
-}
 min_parallel 8;
-END {
+END { flush }
-   min_parallel 1;
-   flush;
-};
 1;
 =head2 FORK BEHAVIOUR
 bytes of memory. In addition, stat requests need a stat buffer (possibly
 a few hundred bytes), readdir requires a result buffer and so on. Perl
 scalars and other data passed into aio requests will also be locked and
 will consume memory till the request has entered the done state.
-This is now awfully much, so queuing lots of requests is not usually a
+This is not awfully much, so queuing lots of requests is not usually a
 problem.
 Per-thread usage:
 In the execution phase, some aio requests require more memory for
 Known bugs will be fixed in the next release.
 =head1 SEE ALSO
-L<Coro::AIO>.
+L<AnyEvent::AIO> for easy integration into event loops, L<Coro::AIO> for a
+more natural syntax.
 =head1 AUTHOR
  Marc Lehmann <schmorp@schmorp.de>
  http://home.schmorp.de/

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing IO-AIO/AIO.pm (file contents): Revision 1.85 by root, Sat Oct 28 01:40:30 2006 UTC vs. Revision 1.144 by root, Sun Apr 19 19:17:59 2009 UTC

Diff Legend

Comparing IO-AIO/AIO.pm (file contents):
Revision 1.85 by root, Sat Oct 28 01:40:30 2006 UTC vs.
Revision 1.144 by root, Sun Apr 19 19:17:59 2009 UTC