[ViewVC] Diff of: cvs/IO-AIO/README

Comparing IO-AIO/README (file contents):
Revision 1.9 by root, Tue Aug 16 23:33:38 2005 UTC vs.
Revision 1.17 by root, Mon Jun 26 14:53:55 2006 UTC

      aio_unlink "/tmp/file", sub { };
      aio_read $fh, 30000, 1024, $buffer, 0, sub {
         $_[0] > 0 or die "read error: $!";
      };
+     # AnyEvent
+     open my $fh, "<&=" . IO::AIO::poll_fileno or die "$!";
+     my $w = AnyEvent->io (fh => $fh, poll => 'r', cb => sub { IO::AIO::poll_cb });
      # Event
      Event->io (fd => IO::AIO::poll_fileno,
                 poll => 'r',
                 cb => \&IO::AIO::poll_cb);
     are ASCII or ISO 8859-1, c) use the Encode module and encode your
     pathnames to the locale (or other) encoding in effect in the user
     environment, d) use Glib::filename_from_unicode on unicode filenames or
     e) use something else.
-    aio_open $pathname, $flags, $mode, $callback
+    aio_open $pathname, $flags, $mode, $callback->($fh)
         Asynchronously open or create a file and call the callback with a
         newly created filehandle for the file.
         The pathname passed to "aio_open" must be absolute. See API NOTES,
         above, for an explanation.
               } else {
                  die "open failed: $!\n";
               }
            };
-    aio_close $fh, $callback
+    aio_close $fh, $callback->($status)
         Asynchronously close a file and call the callback with the result
         code. *WARNING:* although accepted, you should not pass in a perl
         filehandle here, as perl will likely close the file descriptor
         another time when the filehandle is destroyed. Normally, you can
         safely call perls "close" or just let filehandles go out of scope.
         This is supposed to be a bug in the API, so that might change. It's
         therefore best to avoid this function.
-    aio_read $fh,$offset,$length, $data,$dataoffset,$callback
+    aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
-    aio_write $fh,$offset,$length, $data,$dataoffset,$callback
+    aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
         Reads or writes "length" bytes from the specified "fh" and "offset"
         into the scalar given by "data" and offset "dataoffset" and calls
         the callback without the actual number of bytes read (or -1 on
         error, just like the syscall).
+        The $data scalar *MUST NOT* be modified in any way while the request
+        is outstanding. Modifying it can result in segfaults or WW3 (if the
+        necessary/optional hardware is installed).
         Example: Read 15 bytes at offset 7 into scalar $buffer, starting at
         offset 0 within the scalar:
            aio_read $fh, 7, 15, $buffer, 0, sub {
               $_[0] > 0 or die "read error: $!";
               print "read $_[0] bytes: <$buffer>\n";
            };
+    aio_move $srcpath, $dstpath, $callback->($status)
+        [EXPERIMENTAL]
+        Try to move the *file* (directories not supported as either source
+        or destination) from $srcpath to $dstpath and call the callback with
+        the 0 (error) or -1 ok.
+        This is a composite request that tries to rename(2) the file first.
+        If rename files with "EXDEV", it creates the destination file with
+        mode 0200 and copies the contents of the source file into it using
+        "aio_sendfile", followed by restoring atime, mtime, access mode and
+        uid/gid, in that order, and unlinking the $srcpath.
+        If an error occurs, the partial destination file will be unlinked,
+        if possible, except when setting atime, mtime, access mode and
+        uid/gid, where errors are being ignored.
+    aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval)
+        Tries to copy $length bytes from $in_fh to $out_fh. It starts
+        reading at byte offset $in_offset, and starts writing at the current
+        file offset of $out_fh. Because of that, it is not safe to issue
+        more than one "aio_sendfile" per $out_fh, as they will interfere
+        with each other.
+        This call tries to make use of a native "sendfile" syscall to
+        provide zero-copy operation. For this to work, $out_fh should refer
+        to a socket, and $in_fh should refer to mmap'able file.
+        If the native sendfile call fails or is not implemented, it will be
+        emulated, so you can call "aio_sendfile" on any type of filehandle
+        regardless of the limitations of the operating system.
+        Please note, however, that "aio_sendfile" can read more bytes from
+        $in_fh than are written, and there is no way to find out how many
+        bytes have been read from "aio_sendfile" alone, as "aio_sendfile"
+        only provides the number of bytes written to $out_fh. Only if the
+        result value equals $length one can assume that $length bytes have
+        been read.
-    aio_readahead $fh,$offset,$length, $callback
+    aio_readahead $fh,$offset,$length, $callback->($retval)
         "aio_readahead" populates the page cache with data from a file so
         that subsequent reads from that file will not block on disk I/O. The
         $offset argument specifies the starting point from which data is to
         be read and $length specifies the number of bytes to be read. I/O is
         performed in whole pages, so that offset is effectively rounded down
         If that syscall doesn't exist (likely if your OS isn't Linux) it
         will be emulated by simply reading the data, which would have a
         similar effect.
-    aio_stat $fh_or_path, $callback
+    aio_stat $fh_or_path, $callback->($status)
-    aio_lstat $fh, $callback
+    aio_lstat $fh, $callback->($status)
         Works like perl's "stat" or "lstat" in void context. The callback
         will be called after the stat and the results will be available
         using "stat _" or "-s _" etc...
         The pathname passed to "aio_stat" must be absolute. See API NOTES,
            aio_stat "/etc/passwd", sub {
               $_[0] and die "stat failed: $!";
               print "size is ", -s _, "\n";
            };
-    aio_unlink $pathname, $callback
+    aio_unlink $pathname, $callback->($status)
         Asynchronously unlink (delete) a file and call the callback with the
         result code.
+    aio_link $srcpath, $dstpath, $callback->($status)
+        Asynchronously create a new link to the existing object at $srcpath
+        at the path $dstpath and call the callback with the result code.
+    aio_symlink $srcpath, $dstpath, $callback->($status)
+        Asynchronously create a new symbolic link to the existing object at
+        $srcpath at the path $dstpath and call the callback with the result
+        code.
+    aio_rename $srcpath, $dstpath, $callback->($status)
+        Asynchronously rename the object at $srcpath to $dstpath, just as
+        rename(2) and call the callback with the result code.
-    aio_rmdir $pathname, $callback
+    aio_rmdir $pathname, $callback->($status)
         Asynchronously rmdir (delete) a directory and call the callback with
         the result code.
+    aio_readdir $pathname, $callback->($entries)
+        Unlike the POSIX call of the same name, "aio_readdir" reads an
+        entire directory (i.e. opendir + readdir + closedir). The entries
+        will not be sorted, and will NOT include the "." and ".." entries.
+        The callback a single argument which is either "undef" or an
+        array-ref with the filenames.
+    aio_scandir $path, $maxreq, $callback->($dirs, $nondirs)
+        Scans a directory (similar to "aio_readdir") and tries to separate
+        the entries of directory $path into two sets of names, ones you can
+        recurse into (directories), and ones you cannot recurse into
+        (everything else).
+        "aio_scandir" is a composite request that consists of many
+        aio-primitives. $maxreq specifies the maximum number of outstanding
+        aio requests that this function generates. If it is "<= 0", then a
+        suitable default will be chosen (currently 8).
+        On error, the callback is called without arguments, otherwise it
+        receives two array-refs with path-relative entry names.
+        Example:
+           aio_scandir $dir, 0, sub {
+              my ($dirs, $nondirs) = @_;
+              print "real directories: @$dirs\n";
+              print "everything else: @$nondirs\n";
+           };
+        Implementation notes.
+        The "aio_readdir" cannot be avoided, but "stat()"'ing every entry
+        can.
+        After reading the directory, the modification time, size etc. of the
+        directory before and after the readdir is checked, and if they
+        match, the link count will be used to decide how many entries are
+        directories (if >= 2). Otherwise, no knowledge of the number of
+        subdirectories will be assumed.
+        Then entires will be sorted into likely directories (everything
+        without a non-initial dot) and likely non-directories (everything
+        else). Then every entry + "/." will be "stat"'ed, likely directories
+        first. This is often faster because filesystems might detect the
+        type of the entry without reading the inode data (e.g. ext2fs
+        filetype feature). If that succeeds, it assumes that the entry is a
+        directory or a symlink to directory (which will be checked
+        seperately).
+        If the known number of directories has been reached, the rest of the
+        entries is assumed to be non-directories.
-    aio_fsync $fh, $callback
+    aio_fsync $fh, $callback->($status)
         Asynchronously call fsync on the given filehandle and call the
         callback with the fsync result code.
-    aio_fdatasync $fh, $callback
+    aio_fdatasync $fh, $callback->($status)
         Asynchronously call fdatasync on the given filehandle and call the
         callback with the fdatasync result code.
         If this call isn't available because your OS lacks it or it couldn't
         be detected, it will be emulated by calling "fsync" instead.
            IO::AIO::poll_wait, IO::AIO::poll_cb
               if IO::AIO::nreqs;
     IO::AIO::min_parallel $nthreads
-        Set the minimum number of AIO threads to $nthreads. The default is
+        Set the minimum number of AIO threads to $nthreads. The current
-        1, which means a single asynchronous operation can be done at one
+        default is 4, which means four asynchronous operations can be done
-        time (the number of outstanding operations, however, is unlimited).
+        at one time (the number of outstanding operations, however, is
+        unlimited).
+        IO::AIO starts threads only on demand, when an AIO request is queued
+        and no free thread exists.
         It is recommended to keep the number of threads low, as some Linux
         kernel versions will scale negatively with the number of threads
         (higher parallelity => MUCH higher latency). With current Linux 2.6
         versions, 4-32 threads should be fine.
-        Under normal circumstances you don't need to call this function, as
+        Under most circumstances you don't need to call this function, as
-        this module automatically starts some threads (the exact number
+        the module selects a default that is suitable for low to moderate
-        might change, and is currently 4).
+        load.
     IO::AIO::max_parallel $nthreads
         Sets the maximum number of AIO threads to $nthreads. If more than
-        the specified number of threads are currently running, kill them.
+        the specified number of threads are currently running, this function
-        This function blocks until the limit is reached.
+        kills them. This function blocks until the limit is reached.
+        While $nthreads are zero, aio requests get queued but not executed
+        until the number of threads has been increased again.
         This module automatically runs "max_parallel 0" at program end, to
         ensure that all threads are killed and that there are no outstanding
         requests.
         Sets the maximum number of outstanding requests to $nreqs. If you
         try to queue up more than this number of requests, the caller will
         block until some requests have been handled.
         The default is very large, so normally there is no practical limit.
-        If you queue up many requests in a loop it it often improves speed
+        If you queue up many requests in a loop it often improves speed if
-        if you set this to a relatively low number, such as 100.
+        you set this to a relatively low number, such as 100.
         Under normal circumstances you don't need to call this function.
   FORK BEHAVIOUR
-    IO::AIO handles all outstanding AIO requests before the fork, destroys
+    Before the fork, IO::AIO enters a quiescent state where no requests can
-    all AIO threads, and recreates them in both the parent and the child
+    be added in other threads and no results will be processed. After the
-    after the fork.
+    fork the parent simply leaves the quiescent state and continues
+    request/result processing, while the child clears the request/result
+    queue (so the requests started before the fork will only be handled in
+    the parent). Threats will be started on demand until the limit ste in
+    the parent process has been reached again.
 SEE ALSO
     Coro, Linux::AIO.
 AUTHOR

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing IO-AIO/README (file contents): Revision 1.9 by root, Tue Aug 16 23:33:38 2005 UTC vs. Revision 1.17 by root, Mon Jun 26 14:53:55 2006 UTC

Diff Legend

Comparing IO-AIO/README (file contents):
Revision 1.9 by root, Tue Aug 16 23:33:38 2005 UTC vs.
Revision 1.17 by root, Mon Jun 26 14:53:55 2006 UTC