[ViewVC] Diff of: cvs/IO-AIO/README

Comparing IO-AIO/README (file contents):
Revision 1.25 by root, Mon Sep 24 19:28:50 2007 UTC vs.
Revision 1.39 by root, Wed Aug 5 11:53:16 2009 UTC

      $req->cancel; # cancel request if still in queue
      my $grp = aio_group sub { print "all stats done\n" };
      add $grp aio_stat "..." for ...;
+     # AnyEvent integration (EV, Event, Glib, Tk, POE, urxvt, pureperl...)
+     use AnyEvent::AIO;
-     # AnyEvent integration
+     # EV integration
-     open my $fh, "<&=" . IO::AIO::poll_fileno or die "$!";
+     my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
-     my $w = AnyEvent->io (fh => $fh, poll => 'r', cb => sub { IO::AIO::poll_cb });
      # Event integration
      Event->io (fd => IO::AIO::poll_fileno,
                 poll => 'r',
                 cb => \&IO::AIO::poll_cb);
      Danga::Socket->AddOtherFds (IO::AIO::poll_fileno =>
                                  \&IO::AIO::poll_cb);
 DESCRIPTION
     This module implements asynchronous I/O using whatever means your
-    operating system supports.
+    operating system supports. It is implemented as an interface to "libeio"
+    (<http://software.schmorp.de/pkg/libeio.html>).
     Asynchronous means that operations that can normally block your program
     (e.g. reading from disk) will be done asynchronously: the operation will
     still block, but you can do something else in the meantime. This is
     extremely useful for programs that need to stay interactive even when
     operations concurrently.
     While most of this works on all types of file descriptors (for example
     sockets), using these functions on file descriptors that support
     nonblocking operation (again, sockets, pipes etc.) is very inefficient.
-    Use an event loop for that (such as the Event module): IO::AIO will
+    Use an event loop for that (such as the EV module): IO::AIO will
     naturally fit into such an event loop itself.
     In this version, a number of threads are started that execute your
     requests and signal their completion. You don't need thread support in
     perl, and the threads created by this module will not be visible to
     it is currently not reentrant in any way, so use appropriate locking
     yourself, always call "poll_cb" from within the same thread, or never
     call "poll_cb" (or other "aio_" functions) recursively.
   EXAMPLE
-    This is a simple example that uses the Event module and loads
+    This is a simple example that uses the EV module and loads /etc/passwd
-    /etc/passwd asynchronously:
+    asynchronously:
        use Fcntl;
-       use Event;
+       use EV;
        use IO::AIO;
-       # register the IO::AIO callback with Event
+       # register the IO::AIO callback with EV
-       Event->io (fd => IO::AIO::poll_fileno,
+       my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
-                  poll => 'r',
-                  cb => \&IO::AIO::poll_cb);
        # queue the request to open /etc/passwd
        aio_open "/etc/passwd", O_RDONLY, 0, sub {
           my $fh = shift
              or die "error while opening: $!";
              # file contents now in $contents
              print $contents;
              # exit event loop and program
-             Event::unloop;
+             EV::unloop;
           };
        };
        # possibly queue up other requests, or open GUI windows,
        # check for sockets etc. etc.
        # process events as long as there are some:
-       Event::loop;
+       EV::loop;
 REQUEST ANATOMY AND LIFETIME
     Every "aio_*" function creates a request. which is a C data structure
     not directly visible to Perl.
     All the "aio_*" calls are more or less thin wrappers around the syscall
     with the same name (sans "aio_"). The arguments are similar or
     identical, and they all accept an additional (and optional) $callback
     argument which must be a code reference. This code reference will get
     called with the syscall return code (e.g. most syscalls return -1 on
-    error, unlike perl, which usually delivers "false") as it's sole
+    error, unlike perl, which usually delivers "false") as its sole argument
-    argument when the given syscall has been executed asynchronously.
+    after the given syscall has been executed asynchronously.
     All functions expecting a filehandle keep a copy of the filehandle
     internally until the request has finished.
     All functions return request objects of type IO::AIO::REQ that allow
     the user environment, d) use Glib::filename_from_unicode on unicode
     filenames or e) use something else to ensure your scalar has the correct
     contents.
     This works, btw. independent of the internal UTF-8 bit, which IO::AIO
-    handles correctly wether it is set or not.
+    handles correctly whether it is set or not.
     $prev_pri = aioreq_pri [$pri]
         Returns the priority value that would be used for the next request
         and, if $pri is given, sets the priority for the next aio request.
               }
            };
     aio_close $fh, $callback->($status)
         Asynchronously close a file and call the callback with the result
-        code. *WARNING:* although accepted, you should not pass in a perl
+        code.
-        filehandle here, as perl will likely close the file descriptor
-        another time when the filehandle is destroyed. Normally, you can
-        safely call perls "close" or just let filehandles go out of scope.
-        This is supposed to be a bug in the API, so that might change. It's
+        Unfortunately, you can't do this to perl. Perl *insists* very
-        therefore best to avoid this function.
+        strongly on closing the file descriptor associated with the
+        filehandle itself.
+        Therefore, "aio_close" will not close the filehandle - instead it
+        will use dup2 to overwrite the file descriptor with the write-end of
+        a pipe (the pipe fd will be created on demand and will be cached).
+        Or in other words: the file descriptor will be closed, but it will
+        not be free for reuse until the perl filehandle is closed.
     aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
     aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
-        Reads or writes $length bytes from the specified $fh and $offset
+        Reads or writes $length bytes from or to the specified $fh and
-        into the scalar given by $data and offset $dataoffset and calls the
+        $offset into the scalar given by $data and offset $dataoffset and
-        callback without the actual number of bytes read (or -1 on error,
+        calls the callback without the actual number of bytes read (or -1 on
-        just like the syscall).
+        error, just like the syscall).
+        "aio_read" will, like "sysread", shrink or grow the $data scalar to
+        offset plus the actual number of bytes read.
         If $offset is undefined, then the current file descriptor offset
         will be used (and updated), otherwise the file descriptor offset
         will not be changed by these calls.
     aio_readdir $pathname, $callback->($entries)
         Unlike the POSIX call of the same name, "aio_readdir" reads an
         entire directory (i.e. opendir + readdir + closedir). The entries
         will not be sorted, and will NOT include the "." and ".." entries.
-        The callback a single argument which is either "undef" or an
+        The callback is passed a single argument which is either "undef" or
-        array-ref with the filenames.
+        an array-ref with the filenames.
+    aio_readdirx $pathname, $flags, $callback->($entries, $flags)
+        Quite similar to "aio_readdir", but the $flags argument allows to
+        tune behaviour and output format. In case of an error, $entries will
+        be "undef".
+        The flags are a combination of the following constants, ORed
+        together (the flags will also be passed to the callback, possibly
+        modified):
+        IO::AIO::READDIR_DENTS
+            When this flag is off, then the callback gets an arrayref with
+            of names only (as with "aio_readdir"), otherwise it gets an
+            arrayref with "[$name, $type, $inode]" arrayrefs, each
+            describing a single directory entry in more detail.
+            $name is the name of the entry.
+            $type is one of the "IO::AIO::DT_xxx" constants:
+            "IO::AIO::DT_UNKNOWN", "IO::AIO::DT_FIFO", "IO::AIO::DT_CHR",
+            "IO::AIO::DT_DIR", "IO::AIO::DT_BLK", "IO::AIO::DT_REG",
+            "IO::AIO::DT_LNK", "IO::AIO::DT_SOCK", "IO::AIO::DT_WHT".
+            "IO::AIO::DT_UNKNOWN" means just that: readdir does not know. If
+            you need to know, you have to run stat yourself. Also, for speed
+            reasons, the $type scalars are read-only: you can not modify
+            them.
+            $inode is the inode number (which might not be exact on systems
+            with 64 bit inode numbers and 32 bit perls). This field has
+            unspecified content on systems that do not deliver the inode
+            information.
+        IO::AIO::READDIR_DIRS_FIRST
+            When this flag is set, then the names will be returned in an
+            order where likely directories come first. This is useful when
+            you need to quickly find directories, or you want to find all
+            directories while avoiding to stat() each entry.
+            If the system returns type information in readdir, then this is
+            used to find directories directly. Otherwise, likely directories
+            are files beginning with ".", or otherwise files with no dots,
+            of which files with short names are tried first.
+        IO::AIO::READDIR_STAT_ORDER
+            When this flag is set, then the names will be returned in an
+            order suitable for stat()'ing each one. That is, when you plan
+            to stat() all files in the given directory, then the returned
+            order will likely be fastest.
+            If both this flag and "IO::AIO::READDIR_DIRS_FIRST" are
+            specified, then the likely dirs come first, resulting in a less
+            optimal stat order.
+        IO::AIO::READDIR_FOUND_UNKNOWN
+            This flag should not be set when calling "aio_readdirx".
+            Instead, it is being set by "aio_readdirx", when any of the
+            $type's found were "IO::AIO::DT_UNKNOWN". The absense of this
+            flag therefore indicates that all $type's are known, which can
+            be used to speed up some algorithms.
     aio_load $path, $data, $callback->($status)
         This is a composite request that tries to fully load the given file
         into memory. Status is the same as with aio_read.
     aio_copy $srcpath, $dstpath, $callback->($status)
         Try to copy the *file* (directories not supported as either source
         or destination) from $srcpath to $dstpath and call the callback with
         the 0 (error) or -1 ok.
-        This is a composite request that it creates the destination file
+        This is a composite request that creates the destination file with
-        with mode 0200 and copies the contents of the source file into it
+        mode 0200 and copies the contents of the source file into it using
-        using "aio_sendfile", followed by restoring atime, mtime, access
+        "aio_sendfile", followed by restoring atime, mtime, access mode and
-        mode and uid/gid, in that order.
+        uid/gid, in that order.
         If an error occurs, the partial destination file will be unlinked,
         if possible, except when setting atime, mtime, access mode and
         uid/gid, where errors are being ignored.
     aio_move $srcpath, $dstpath, $callback->($status)
         Try to move the *file* (directories not supported as either source
         or destination) from $srcpath to $dstpath and call the callback with
         the 0 (error) or -1 ok.
-        This is a composite request that tries to rename(2) the file first.
+        This is a composite request that tries to rename(2) the file first;
-        If rename files with "EXDEV", it copies the file with "aio_copy"
+        if rename fails with "EXDEV", it copies the file with "aio_copy"
-        and, if that is successful, unlinking the $srcpath.
+        and, if that is successful, unlinks the $srcpath.
     aio_scandir $path, $maxreq, $callback->($dirs, $nondirs)
         Scans a directory (similar to "aio_readdir") but additionally tries
         to efficiently separate the entries of directory $path into two sets
         of names, directories you can recurse into (directories), and ones
         Implementation notes.
         The "aio_readdir" cannot be avoided, but "stat()"'ing every entry
         can.
+        If readdir returns file type information, then this is used directly
+        to find directories.
-        After reading the directory, the modification time, size etc. of the
+        Otherwise, after reading the directory, the modification time, size
-        directory before and after the readdir is checked, and if they match
+        etc. of the directory before and after the readdir is checked, and
-        (and isn't the current time), the link count will be used to decide
+        if they match (and isn't the current time), the link count will be
-        how many entries are directories (if >= 2). Otherwise, no knowledge
+        used to decide how many entries are directories (if >= 2).
-        of the number of subdirectories will be assumed.
+        Otherwise, no knowledge of the number of subdirectories will be
+        assumed.
-        Then entries will be sorted into likely directories (everything
+        Then entries will be sorted into likely directories a non-initial
-        without a non-initial dot currently) and likely non-directories
+        dot currently) and likely non-directories (see "aio_readdirx"). Then
-        (everything else). Then every entry plus an appended "/." will be
+        every entry plus an appended "/." will be "stat"'ed, likely
-        "stat"'ed, likely directories first. If that succeeds, it assumes
+        directories first, in order of their inode numbers. If that
-        that the entry is a directory or a symlink to directory (which will
+        succeeds, it assumes that the entry is a directory or a symlink to
-        be checked seperately). This is often faster than stat'ing the entry
+        directory (which will be checked seperately). This is often faster
-        itself because filesystems might detect the type of the entry
+        than stat'ing the entry itself because filesystems might detect the
-        without reading the inode data (e.g. ext2fs filetype feature).
+        type of the entry without reading the inode data (e.g. ext2fs
+        filetype feature), even on systems that cannot return the filetype
+        information on readdir.
         If the known number of directories (link count - 2) has been
         reached, the rest of the entries is assumed to be non-directories.
         This only works with certainty on POSIX (= UNIX) filesystems, which
         Delete a directory tree starting (and including) $path, return the
         status of the final "rmdir" only. This is a composite request that
         uses "aio_scandir" to recurse into and rmdir directories, and unlink
         everything else.
+    aio_sync $callback->($status)
+        Asynchronously call sync and call the callback when finished.
     aio_fsync $fh, $callback->($status)
         Asynchronously call fsync on the given filehandle and call the
         callback with the fsync result code.
     aio_fdatasync $fh, $callback->($status)
         Asynchronously call fdatasync on the given filehandle and call the
         callback with the fdatasync result code.
         If this call isn't available because your OS lacks it or it couldn't
         be detected, it will be emulated by calling "fsync" instead.
+    aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)
+        Sync the data portion of the file specified by $offset and $length
+        to disk (but NOT the metadata), by calling the Linux-specific
+        sync_file_range call. If sync_file_range is not available or it
+        returns ENOSYS, then fdatasync or fsync is being substituted.
+        $flags can be a combination of
+        "IO::AIO::SYNC_FILE_RANGE_WAIT_BEFORE",
+        "IO::AIO::SYNC_FILE_RANGE_WRITE" and
+        "IO::AIO::SYNC_FILE_RANGE_WAIT_AFTER": refer to the sync_file_range
+        manpage for details.
+    aio_pathsync $path, $callback->($status)
+        This request tries to open, fsync and close the given path. This is
+        a composite request intended to sync directories after directory
+        operations (E.g. rename). This might not work on all operating
+        systems or have any specific effect, but usually it makes sure that
+        directory changes get written to disc. It works for anything that
+        can be opened for read-only, not just directories.
+        Future versions of this function might fall back to other methods
+        when "fsync" on the directory fails (such as calling "sync").
+        Passes 0 when everything went ok, and -1 on error.
     aio_group $callback->(...)
         This is a very special aio request: Instead of doing something, it
         is a container for other aio requests, which is useful if you want
         to bundle many requests into a single, composite, request with a
     cancel $req
         Cancels the request, if possible. Has the effect of skipping
         execution when entering the execute state and skipping calling the
         callback when entering the the result state, but will leave the
-        request otherwise untouched. That means that requests that currently
+        request otherwise untouched (with the exception of readdir). That
-        execute will not be stopped and resources held by the request will
+        means that requests that currently execute will not be stopped and
-        not be freed prematurely.
+        resources held by the request will not be freed prematurely.
     cb $req $callback->(...)
         Replace (or simply set) the callback registered to the request.
   IO::AIO::GRP CLASS
        };
     This makes it very easy to create composite requests (see the source of
     "aio_move" for an application) that work and feel like simple requests.
-    * The IO::AIO::GRP objects will be cleaned up during calls to
+    *   The IO::AIO::GRP objects will be cleaned up during calls to
-    "IO::AIO::poll_cb", just like any other request.
+        "IO::AIO::poll_cb", just like any other request.
-    * They can be canceled like any other request. Canceling will cancel not
+    *   They can be canceled like any other request. Canceling will cancel
-    only the request itself, but also all requests it contains.
+        not only the request itself, but also all requests it contains.
-    * They can also can also be added to other IO::AIO::GRP objects.
+    *   They can also can also be added to other IO::AIO::GRP objects.
-    * You must not add requests to a group from within the group callback
+    *   You must not add requests to a group from within the group callback
-    (or any later time).
+        (or any later time).
     Their lifetime, simplified, looks like this: when they are empty, they
     will finish very quickly. If they contain only requests that are in the
     "done" state, they will also finish. Otherwise they will continue to
     exist.
-    That means after creating a group you have some time to add requests.
+    That means after creating a group you have some time to add requests
-    And in the callbacks of those requests, you can add further requests to
+    (precisely before the callback has been invoked, which is only done
-    the group. And only when all those requests have finished will the the
+    within the "poll_cb"). And in the callbacks of those requests, you can
-    group itself finish.
+    add further requests to the group. And only when all those requests have
+    finished will the the group itself finish.
     add $grp ...
     $grp->add (...)
         Add one or more requests to the group. Any type of IO::AIO::REQ can
         be added, including other groups, as long as you do not create
         request itself. Useful when you queued a lot of events but got a
         result early.
     $grp->result (...)
         Set the result value(s) that will be passed to the group callback
-        when all subrequests have finished and set thre groups errno to the
+        when all subrequests have finished and set the groups errno to the
         current value of errno (just like calling "errno" without an error
         number). By default, no argument will be passed and errno is zero.
     $grp->errno ([$errno])
         Sets the group errno value to $errno, or the current value of errno
         does not impose any limits).
         If the feed does not queue more requests when called, it will be
         automatically removed from the group.
-        If the feed limit is 0, it will be set to 2 automatically.
+        If the feed limit is 0 when this method is called, it will be set to
+        2 automatically.
         Example:
            # stat all files in @files, but only ever use four aio requests concurrently:
         Sets the feeder limit for the group: The feeder will be called
         whenever the group contains less than this many requests.
         Setting the limit to 0 will pause the feeding process.
+        The default value for the limit is 0, but note that setting a feeder
+        automatically bumps it up to 2.
   SUPPORT FUNCTIONS
    EVENT PROCESSING AND EVENT LOOP INTEGRATION
     $fileno = IO::AIO::poll_fileno
         Return the *request result pipe file descriptor*. This filehandle
         must be polled for reading by some mechanism outside this module
-        (e.g. Event or select, see below or the SYNOPSIS). If the pipe
+        (e.g. EV, Glib, select and so on, see below or the SYNOPSIS). If the
-        becomes readable you have to call "poll_cb" to check the results.
+        pipe becomes readable you have to call "poll_cb" to check the
+        results.
         See "poll_cb" for an example.
     IO::AIO::poll_cb
         Process some outstanding events on the result pipe. You have to call
-        this regularly. Returns the number of events processed. Returns
+        this regularly. Returns 0 if all events could be processed, or -1 if
-        immediately when no events are outstanding. The amount of events
+        it returned earlier for whatever reason. Returns immediately when no
+        events are outstanding. The amount of events processed depends on
-        processed depends on the settings of "IO::AIO::max_poll_req" and
+        the settings of "IO::AIO::max_poll_req" and
         "IO::AIO::max_poll_time".
         If not all requests were processed for whatever reason, the
-        filehandle will still be ready when "poll_cb" returns.
+        filehandle will still be ready when "poll_cb" returns, so normally
+        you don't have to do anything special to have it called later.
         Example: Install an Event watcher that automatically calls
-        IO::AIO::poll_cb with high priority:
+        IO::AIO::poll_cb with high priority (more examples can be found in
+        the SYNOPSIS section, at the top of this document):
            Event->io (fd => IO::AIO::poll_fileno,
                       poll => 'r', async => 1,
                       cb => \&IO::AIO::poll_cb);
         The default is probably ok in most situations, especially if thread
         creation is fast. If thread creation is very slow on your system you
         might want to use larger values.
-    $oldmaxreqs = IO::AIO::max_outstanding $maxreqs
+    IO::AIO::max_outstanding $maxreqs
         This is a very bad function to use in interactive programs because
         it blocks, and a bad way to reduce concurrency because it is
         inexact: Better use an "aio_group" together with a feed callback.
         Sets the maximum number of outstanding requests to $nreqs. If you do
         The default value is very large, so there is no practical limit on
         the number of outstanding requests.
         You can still queue as many requests as you want. Therefore,
-        "max_oustsanding" is mainly useful in simple scripts (with low
+        "max_outstanding" is mainly useful in simple scripts (with low
         values) or as a stop gap to shield against fatal memory overflow
         (with large values).
    STATISTICAL INFORMATION
     IO::AIO::nreqs
         executed).
     IO::AIO::npending
         Returns the number of requests currently in the pending state
         (executed, but not yet processed by poll_cb).
+   MISCELLANEOUS FUNCTIONS
+    IO::AIO implements some functions that might be useful, but are not
+    asynchronous.
+    IO::AIO::sendfile $ofh, $ifh, $offset, $count
+        Calls the "eio_sendfile_sync" function, which is like
+        "aio_sendfile", but is blocking (this makes most sense if you know
+        the input data is likely cached already and the output filehandle is
+        set to non-blocking operations).
+        Returns the number of bytes copied, or -1 on error.
+    IO::AIO::fadvise $fh, $offset, $len, $advice
+        Simply calls the "posix_fadvise" function (see it's manpage for
+        details). The following advice constants are avaiable:
+        "IO::AIO::FADV_NORMAL", "IO::AIO::FADV_SEQUENTIAL",
+        "IO::AIO::FADV_RANDOM", "IO::AIO::FADV_NOREUSE",
+        "IO::AIO::FADV_WILLNEED", "IO::AIO::FADV_DONTNEED".
+        On systems that do not implement "posix_fadvise", this function
+        returns ENOSYS, otherwise the return value of "posix_fadvise".
   FORK BEHAVIOUR
     This module should do "the right thing" when the process using it forks:
     Before the fork, IO::AIO enters a quiescent state where no requests can
 KNOWN BUGS
     Known bugs will be fixed in the next release.
 SEE ALSO
-    Coro::AIO.
+    AnyEvent::AIO for easy integration into event loops, Coro::AIO for a
+    more natural syntax.
 AUTHOR
      Marc Lehmann <schmorp@schmorp.de>
      http://home.schmorp.de/

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing IO-AIO/README (file contents): Revision 1.25 by root, Mon Sep 24 19:28:50 2007 UTC vs. Revision 1.39 by root, Wed Aug 5 11:53:16 2009 UTC

Diff Legend

Comparing IO-AIO/README (file contents):
Revision 1.25 by root, Mon Sep 24 19:28:50 2007 UTC vs.
Revision 1.39 by root, Wed Aug 5 11:53:16 2009 UTC