[ViewVC] Diff of: cvs/JSON-XS/README

Comparing JSON-XS/README (file contents):
Revision 1.27 by root, Tue Jul 15 11:29:29 2008 UTC vs.
Revision 1.34 by root, Thu Mar 11 17:36:09 2010 UTC

      $perl_scalar = $coder->decode ($unicode_json_text);
      # Note that JSON version 2.0 and above will automatically use JSON::XS
      # if available, at virtually no speed overhead either, so you should
      # be able to just:
- use JSON;
+     use JSON;
      # and do the same things, except that you have a pure-perl fallback now.
 DESCRIPTION
     This module converts Perl data structures to JSON and vice versa. Its
     As this is the n-th-something JSON module on CPAN, what was the reason
     to write yet another JSON module? While it seems there are many JSON
     modules, none of them correctly handle all corner cases, and in most
     cases their maintainers are unresponsive, gone missing, or not listening
     to bug reports for other reasons.
-    See COMPARISON, below, for a comparison to some other JSON modules.
     See MAPPING, below, on how JSON::XS maps perl values to JSON values and
     vice versa.
   FEATURES
         it is disabled, the same hash might be encoded differently even if
         contains the same data, as key-value pairs have no inherent ordering
         in Perl.
         This setting has no effect when decoding JSON texts.
+        This setting has currently no effect on tied hashes.
     $json = $json->allow_nonref ([$enable])
     $enabled = $json->get_allow_nonref
         If $enable is true (or missing), then the "encode" method can
         convert a non-reference into its corresponding string, number or
         after a JSON object or b) parsing multiple JSON objects separated by
         non-JSON text (such as commas).
     $json->incr_skip
         This will reset the state of the incremental parser and will remove
-        the parsed text from the input buffer. This is useful after
+        the parsed text from the input buffer so far. This is useful after
         "incr_parse" died, in which case the input buffer and incremental
         parser state is left unchanged, to skip the text parsed so far and
         to reset the parse state.
+        The difference to "incr_reset" is that only text until the parse
+        error occured is removed.
     $json->incr_reset
         This completely resets the incremental parser, that is, after this
         call, it will be as if the parser had never parsed anything.
-        This is useful if you want ot repeatedly parse JSON objects and want
+        This is useful if you want to repeatedly parse JSON objects and want
         to ignore any trailing data, which means you have to reset the
         parser after each successful decode.
   LIMITATIONS
     All options that affect decoding are supported, except "allow_nonref".
         structure back. This is useful when your channel for JSON transfer
         is not 8-bit clean or the encoding might be mangled in between (e.g.
         in mail), and works because ASCII is a proper subset of most 8-bit
         and multibyte encodings in use in the world.
+  JSON and ECMAscript
+    JSON syntax is based on how literals are represented in javascript (the
+    not-standardised predecessor of ECMAscript) which is presumably why it
+    is called "JavaScript Object Notation".
+    However, JSON is not a subset (and also not a superset of course) of
+    ECMAscript (the standard) or javascript (whatever browsers actually
+    implement).
+    If you want to use javascript's "eval" function to "parse" JSON, you
+    might run into parse errors for valid JSON texts, or the resulting data
+    structure might not be queryable:
+    One of the problems is that U+2028 and U+2029 are valid characters
+    inside JSON strings, but are not allowed in ECMAscript string literals,
+    so the following Perl fragment will not output something that can be
+    guaranteed to be parsable by javascript's "eval":
+       use JSON::XS;
+       print encode_json [chr 0x2028];
+    The right fix for this is to use a proper JSON parser in your javascript
+    programs, and not rely on "eval" (see for example Douglas Crockford's
+    json2.js parser).
+    If this is not an option, you can, as a stop-gap measure, simply encode
+    to ASCII-only JSON:
+       use JSON::XS;
+       print JSON::XS->new->ascii->encode ([chr 0x2028]);
+    Note that this will enlarge the resulting JSON text quite a bit if you
+    have many non-ASCII characters. You might be tempted to run some regexes
+    to only escape U+2028 and U+2029, e.g.:
+       # DO NOT USE THIS!
+       my $json = JSON::XS->new->utf8->encode ([chr 0x2028]);
+       $json =~ s/\xe2\x80\xa8/\\u2028/g; # escape U+2028
+       $json =~ s/\xe2\x80\xa9/\\u2029/g; # escape U+2029
+       print $json;
+    Note that *this is a bad idea*: the above only works for U+2028 and
+    U+2029 and thus only for fully ECMAscript-compliant parsers. Many
+    existing javascript implementations, however, have issues with other
+    characters as well - using "eval" naively simply *will* cause problems.
+    Another problem is that some javascript implementations reserve some
+    property names for their own purposes (which probably makes them
+    non-ECMAscript-compliant). For example, Iceweasel reserves the
+    "__proto__" property name for it's own purposes.
+    If that is a problem, you could parse try to filter the resulting JSON
+    output for these property strings, e.g.:
+       $json =~ s/"__proto__"\s*:/"__proto__renamed":/g;
+    This works because "__proto__" is not valid outside of strings, so every
+    occurence of ""__proto__"\s*:" must be a string used as property name.
+    If you know of other incompatibilities, please let me know.
   JSON and YAML
     You often hear that JSON is a subset of YAML. This is, however, a mass
     hysteria(*) and very far from the truth (as of the time of this
     writing), so let me state it clearly: *in general, there is no way to
     configure JSON::XS to output a data structure as valid YAML* that works
        my $yaml = $to_yaml->encode ($ref) . "\n";
     This will *usually* generate JSON texts that also parse as valid YAML.
     Please note that YAML has hardcoded limits on (simple) object key
     lengths that JSON doesn't have and also has different and incompatible
-    unicode handling, so you should make sure that your hash keys are
+    unicode character escape syntax, so you should make sure that your hash
-    noticeably shorter than the 1024 "stream characters" YAML allows and
+    keys are noticeably shorter than the 1024 "stream characters" YAML
-    that you do not have characters with codepoint values outside the
+    allows and that you do not have characters with codepoint values outside
-    Unicode BMP (basic multilingual page). YAML also does not allow "\/"
+    the Unicode BMP (basic multilingual page). YAML also does not allow "\/"
     sequences in strings (which JSON::XS does not *currently* generate, but
     other JSON generators might).
     There might be other incompatibilities that I am not aware of (or the
     YAML specification has been changed yet again - it does so quite often).
         (which is not that difficult or long) and finally make YAML
         compatible to it, and educating users about the changes, instead of
         spreading lies about the real compatibility for many *years* and
         trying to silence people who point out that it isn't true.
+        Addendum/2009: the YAML 1.2 spec is still incomaptible with JSON,
+        even though the incompatibilities have been documented (and are
+        known to Brian) for many years and the spec makes explicit claims
+        that YAML is a superset of JSON. It would be so easy to fix, but
+        apparently, bullying and corrupting userdata is so much easier.
   SPEED
     It seems that JSON::XS is surprisingly fast, as shown in the following
     tables. They have been generated with the help of the "eg/bench" program
     in the JSON::XS distribution, to make it easy to compare on your own
     system.
     single-line JSON string (also available at
     <http://dist.schmorp.de/misc/json/short.json>).
        {"method": "handleMessage", "params": ["user1",
        "we were just talking"], "id": null, "array":[1,11,234,-5,1e5,1e7,
-       true,  false]}
+       1,  0]}
     It shows the number of encodes/decodes per second (JSON::XS uses the
     functional interface, while JSON::XS/2 uses the OO interface with
-    pretty-printing and hashkey sorting enabled, JSON::XS/3 enables shrink).
+    pretty-printing and hashkey sorting enabled, JSON::XS/3 enables shrink.
-    Higher is better:
+    JSON::DWIW/DS uses the deserialise function, while JSON::DWIW::FJ uses
+    the from_json method). Higher is better:
-       module     |     encode |     decode |
+       module        |     encode |     decode |
-       -----------|------------|------------|
+       --------------|------------|------------|
-       JSON 1.x   |   4990.842 |   4088.813 |
+       JSON::DWIW/DS |  86302.551 | 102300.098 |
-       JSON::DWIW |  51653.990 |  71575.154 |
+       JSON::DWIW/FJ |  86302.551 |  75983.768 |
-       JSON::PC   |  65948.176 |  74631.744 |
+       JSON::PP      |  15827.562 |   6638.658 |
-       JSON::PP   |   8931.652 |   3817.168 |
+       JSON::Syck    |  63358.066 |  47662.545 |
-       JSON::Syck |  24877.248 |  27776.848 |
+       JSON::XS      | 511500.488 | 511500.488 |
-       JSON::XS   | 388361.481 | 227951.304 |
+       JSON::XS/2    | 291271.111 | 388361.481 |
-       JSON::XS/2 | 227951.304 | 218453.333 |
+       JSON::XS/3    | 361577.931 | 361577.931 |
-       JSON::XS/3 | 338250.323 | 218453.333 |
+       Storable      |  66788.280 | 265462.278 |
-       Storable   |  16500.016 | 135300.129 |
-       -----------+------------+------------+
+       --------------+------------+------------+
-    That is, JSON::XS is about five times faster than JSON::DWIW on
+    That is, JSON::XS is almost six times faster than JSON::DWIW on
-    encoding, about three times faster on decoding, and over forty times
+    encoding, about five times faster on decoding, and over thirty to
-    faster than JSON, even with pretty-printing and key sorting. It also
+    seventy times faster than JSON's pure perl implementation. It also
     compares favourably to Storable for small amounts of data.
     Using a longer test string (roughly 18KB, generated from Yahoo! Locals
     search API (<http://dist.schmorp.de/misc/json/long.json>).
-       module     |     encode |     decode |
+       module        |     encode |     decode |
-       -----------|------------|------------|
+       --------------|------------|------------|
-       JSON 1.x   |     55.260 |     34.971 |
+       JSON::DWIW/DS |   1647.927 |   2673.916 |
-       JSON::DWIW |    825.228 |   1082.513 |
+       JSON::DWIW/FJ |   1630.249 |   2596.128 |
-       JSON::PC   |   3571.444 |   2394.829 |
-       JSON::PP   |    210.987 |     32.574 |
+       JSON::PP      |    400.640 |     62.311 |
-       JSON::Syck |    552.551 |    787.544 |
+       JSON::Syck    |   1481.040 |   1524.869 |
-       JSON::XS   |   5780.463 |   4854.519 |
+       JSON::XS      |  20661.596 |   9541.183 |
-       JSON::XS/2 |   3869.998 |   4798.975 |
+       JSON::XS/2    |  10683.403 |   9416.938 |
-       JSON::XS/3 |   5862.880 |   4798.975 |
+       JSON::XS/3    |  20661.596 |   9400.054 |
-       Storable   |   4445.002 |   5235.027 |
+       Storable      |  19765.806 |  10000.725 |
-       -----------+------------+------------+
+       --------------+------------+------------+
     Again, JSON::XS leads by far (except for Storable which non-surprisingly
-    decodes faster).
+    decodes a bit faster).
     On large strings containing lots of high Unicode characters, some
     modules (such as JSON::PC) seem to decode faster than JSON::XS, but the
     result will be broken due to missing (or wrong) Unicode handling. Others
     refuse to decode or encode properly, so it was impossible to prepare a
     information you might want to make sure that exceptions thrown by
     JSON::XS will not end up in front of untrusted eyes.
     If you are using JSON::XS to return packets to consumption by JavaScript
     scripts in a browser you should have a look at
-    <http://jpsykes.com/47/practical-csrf-and-json-security> to see whether
+    <http://blog.archive.jpsykes.com/47/practical-csrf-and-json-security/>
-    you are vulnerable to some common attack vectors (which really are
+    to see whether you are vulnerable to some common attack vectors (which
-    browser design bugs, but it is still you who will have to deal with it,
+    really are browser design bugs, but it is still you who will have to
-    as major browser developers care only for features, not about getting
+    deal with it, as major browser developers care only for features, not
-    security right).
+    about getting security right).
 THREADS
     This module is *not* guaranteed to be thread safe and there are no plans
     to change this until Perl gets thread support (as opposed to the
     horribly slow so-called "threads" which are simply slow and bloated

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing JSON-XS/README (file contents): Revision 1.27 by root, Tue Jul 15 11:29:29 2008 UTC vs. Revision 1.34 by root, Thu Mar 11 17:36:09 2010 UTC

Diff Legend

Comparing JSON-XS/README (file contents):
Revision 1.27 by root, Tue Jul 15 11:29:29 2008 UTC vs.
Revision 1.34 by root, Thu Mar 11 17:36:09 2010 UTC