[ViewVC] Diff of: cvs/JSON-XS/XS.pm

Comparing JSON-XS/XS.pm (file contents):
Revision 1.116 by root, Tue Feb 17 23:41:20 2009 UTC vs.
Revision 1.136 by root, Wed Jul 27 15:53:40 2011 UTC

 so, and even documents what "correct" means.
 =item * round-trip integrity
 When you serialise a perl data structure using only data types supported
-by JSON, the deserialised data structure is identical on the Perl level.
+by JSON and Perl, the deserialised data structure is identical on the Perl
-(e.g. the string "2.0" doesn't suddenly become "2" just because it looks
+level. (e.g. the string "2.0" doesn't suddenly become "2" just because
-like a number). There minor I<are> exceptions to this, read the MAPPING
+it looks like a number). There I<are> minor exceptions to this, read the
-section below to learn about those.
+MAPPING section below to learn about those.
 =item * strict checking of JSON correctness
 There is no guessing, no generating of illegal JSON texts by default,
 and only JSON is accepted as input by default (the latter is a security
 =cut
 package JSON::XS;
-no warnings;
+use common::sense;
-use strict;
-our $VERSION = '2.232';
+our $VERSION = '2.31';
 our @ISA = qw(Exporter);
 our @EXPORT = qw(encode_json decode_json to_json from_json);
 sub to_json($) {
 the same JSON text (given the same overall settings). If it is disabled,
 the same hash might be encoded differently even if contains the same data,
 as key-value pairs have no inherent ordering in Perl.
 This setting has no effect when decoding JSON texts.
+This setting has currently no effect on tied hashes.
 =item $json = $json->allow_nonref ([$enable])
 =item $enabled = $json->get_allow_nonref
 calls).
 JSON::XS will only attempt to parse the JSON text once it is sure it
 has enough text to get a decisive result, using a very simple but
 truly incremental parser. This means that it sometimes won't stop as
-early as the full parser, for example, it doesn't detect parenthese
+early as the full parser, for example, it doesn't detect mismatched
-mismatches. The only thing it guarantees is that it starts decoding as
+parentheses. The only thing it guarantees is that it starts decoding as
 soon as a syntactically valid JSON text has been seen. This means you need
 to set resource limits (e.g. C<max_size>) to ensure the parser will stop
 parsing in the presence if syntax errors.
 The following methods implement this incremental parser.
 otherwise. For this to work, there must be no separators between the JSON
 objects or arrays, instead they must be concatenated back-to-back. If
 an error occurs, an exception will be raised as in the scalar context
 case. Note that in this case, any previously-parsed JSON texts will be
 lost.
+Example: Parse some JSON arrays/objects in a given string and return
+them.
+   my @objs = JSON::XS->new->incr_parse ("[5][7][1,2]");
 =item $lvalue_string = $json->incr_text
 This method returns the currently stored JSON fragment as an lvalue, that
 is, you can manipulate it. This I<only> works when a preceding call to
 Numbers containing a fractional or exponential part will always be
 represented as numeric (floating point) values, possibly at a loss of
 precision (in which case you might lose perfect roundtripping ability, but
 the JSON number will still be re-encoded as a JSON number).
+Note that precision is not accuracy - binary floating point values cannot
+represent most decimal fractions exactly, and when converting from and to
+floating point, JSON::XS only guarantees precision up to but not including
+the leats significant bit.
 =item true, false
 These JSON atoms become C<JSON::XS::true> and C<JSON::XS::false>,
 respectively. They are overloaded to act almost exactly like the numbers
 C<1> and C<0>. You can check whether a scalar is a JSON boolean by using
 You can not currently force the type in other, less obscure, ways. Tell me
 if you need this capability (but don't forget to explain why it's needed
 :).
+Note that numerical precision has the same meaning as under Perl (so
+binary to decimal conversion follows the same rules as in Perl, which
+can differ to other languages). Also, your perl interpreter might expose
+extensions to the floating point numbers of your platform, such as
+infinities or NaN's - these cannot be represented in JSON, and it is an
+error to pass those in.
 =back
 =head1 ENCODING/CODESET FLAG NOTES
    use JSON::XS;
    print encode_json [chr 0x2028];
 The right fix for this is to use a proper JSON parser in your javascript
-programs, and not rely on C<eval>.
+programs, and not rely on C<eval> (see for example Douglas Crockford's
+F<json2.js> parser).
 If this is not an option, you can, as a stop-gap measure, simply encode to
 ASCII-only JSON:
    use JSON::XS;
    print JSON::XS->new->ascii->encode ([chr 0x2028]);
-And if you are concerned about the size of the resulting JSON text, you
+Note that this will enlarge the resulting JSON text quite a bit if you
-can run some regexes to only escape U+2028 and U+2029:
+have many non-ASCII characters. You might be tempted to run some regexes
+to only escape U+2028 and U+2029, e.g.:
-   use JSON::XS;
+   # DO NOT USE THIS!
    my $json = JSON::XS->new->utf8->encode ([chr 0x2028]);
    $json =~ s/\xe2\x80\xa8/\\u2028/g; # escape U+2028
    $json =~ s/\xe2\x80\xa9/\\u2029/g; # escape U+2029
    print $json;
-This works because U+2028/U+2029 are not allowed outside of strings and
+Note that I<this is a bad idea>: the above only works for U+2028 and
-are not used for syntax, so replacing them unconditionally just works.
-Note, however, that fixing the broken JSON parser is better than working
-around it in every other generator. The above regexes should work well in
-other languages, as long as they operate on UTF-8. It is equally valid to
-replace all occurences of U+2028/2029 directly by their \\u-escaped forms
-in unicode texts, so they can simply be used to fix any parsers relying on
-C<eval> by first applying the regexes on the encoded texts.
-Note also that the above only works for U+2028 and U+2029 and thus
-only for fully ECMAscript-compliant parsers. Many existing javascript
+U+2029 and thus only for fully ECMAscript-compliant parsers. Many existing
-implementations misparse other characters as well. Best rely on a good
+javascript implementations, however, have issues with other characters as
-JSON parser, such as Douglas Crockfords F<json2.js>, which escapes the
+well - using C<eval> naively simply I<will> cause problems.
-above and many more problematic characters properly before passing them
-into C<eval>.
 Another problem is that some javascript implementations reserve
 some property names for their own purposes (which probably makes
 them non-ECMAscript-compliant). For example, Iceweasel reserves the
-C<__proto__> property name for it's own purposes.
+C<__proto__> property name for its own purposes.
 If that is a problem, you could parse try to filter the resulting JSON
 output for these property strings, e.g.:
    $json =~ s/"__proto__"\s*:/"__proto__renamed":/g;
    my $yaml = $to_yaml->encode ($ref) . "\n";
 This will I<usually> generate JSON texts that also parse as valid
 YAML. Please note that YAML has hardcoded limits on (simple) object key
 lengths that JSON doesn't have and also has different and incompatible
-unicode handling, so you should make sure that your hash keys are
+unicode character escape syntax, so you should make sure that your hash
-noticeably shorter than the 1024 "stream characters" YAML allows and that
+keys are noticeably shorter than the 1024 "stream characters" YAML allows
-you do not have characters with codepoint values outside the Unicode BMP
+and that you do not have characters with codepoint values outside the
-(basic multilingual page). YAML also does not allow C<\/> sequences in
+Unicode BMP (basic multilingual page). YAML also does not allow C<\/>
-strings (which JSON::XS does not I<currently> generate, but other JSON
+sequences in strings (which JSON::XS does not I<currently> generate, but
-generators might).
+other JSON generators might).
 There might be other incompatibilities that I am not aware of (or the YAML
 specification has been changed yet again - it does so quite often). In
 general you should not try to generate YAML with a JSON generator or vice
 versa, or try to parse JSON with a YAML parser or vice versa: chances are
 that difficult or long) and finally make YAML compatible to it, and
 educating users about the changes, instead of spreading lies about the
 real compatibility for many I<years> and trying to silence people who
 point out that it isn't true.
+Addendum/2009: the YAML 1.2 spec is still incompatible with JSON, even
+though the incompatibilities have been documented (and are known to Brian)
+for many years and the spec makes explicit claims that YAML is a superset
+of JSON. It would be so easy to fix, but apparently, bullying people and
+corrupting userdata is so much easier.
 =back
 =head2 SPEED
 a very short single-line JSON string (also available at
 L<http://dist.schmorp.de/misc/json/short.json>).
    {"method": "handleMessage", "params": ["user1",
    "we were just talking"], "id": null, "array":[1,11,234,-5,1e5,1e7,
-   true,  false]}
+   1,  0]}
 It shows the number of encodes/decodes per second (JSON::XS uses
 the functional interface, while JSON::XS/2 uses the OO interface
 with pretty-printing and hashkey sorting enabled, JSON::XS/3 enables
-shrink). Higher is better:
+shrink. JSON::DWIW/DS uses the deserialise function, while JSON::DWIW::FJ
+uses the from_json method). Higher is better:
-   module     |     encode |     decode |
+   module        |     encode |     decode |
-   -----------|------------|------------|
+   --------------|------------|------------|
-   JSON 1.x   |   4990.842 |   4088.813 |
+   JSON::DWIW/DS |  86302.551 | 102300.098 |
-   JSON::DWIW |  51653.990 |  71575.154 |
+   JSON::DWIW/FJ |  86302.551 |  75983.768 |
-   JSON::PC   |  65948.176 |  74631.744 |
+   JSON::PP      |  15827.562 |   6638.658 |
-   JSON::PP   |   8931.652 |   3817.168 |
+   JSON::Syck    |  63358.066 |  47662.545 |
-   JSON::Syck |  24877.248 |  27776.848 |
+   JSON::XS      | 511500.488 | 511500.488 |
-   JSON::XS   | 388361.481 | 227951.304 |
+   JSON::XS/2    | 291271.111 | 388361.481 |
-   JSON::XS/2 | 227951.304 | 218453.333 |
+   JSON::XS/3    | 361577.931 | 361577.931 |
-   JSON::XS/3 | 338250.323 | 218453.333 |
+   Storable      |  66788.280 | 265462.278 |
-   Storable   |  16500.016 | 135300.129 |
-   -----------+------------+------------+
+   --------------+------------+------------+
-That is, JSON::XS is about five times faster than JSON::DWIW on encoding,
+That is, JSON::XS is almost six times faster than JSON::DWIW on encoding,
-about three times faster on decoding, and over forty times faster
+about five times faster on decoding, and over thirty to seventy times
-than JSON, even with pretty-printing and key sorting. It also compares
+faster than JSON's pure perl implementation. It also compares favourably
-favourably to Storable for small amounts of data.
+to Storable for small amounts of data.
 Using a longer test string (roughly 18KB, generated from Yahoo! Locals
 search API (L<http://dist.schmorp.de/misc/json/long.json>).
-   module     |     encode |     decode |
+   module        |     encode |     decode |
-   -----------|------------|------------|
+   --------------|------------|------------|
-   JSON 1.x   |     55.260 |     34.971 |
+   JSON::DWIW/DS |   1647.927 |   2673.916 |
-   JSON::DWIW |    825.228 |   1082.513 |
+   JSON::DWIW/FJ |   1630.249 |   2596.128 |
-   JSON::PC   |   3571.444 |   2394.829 |
-   JSON::PP   |    210.987 |     32.574 |
+   JSON::PP      |    400.640 |     62.311 |
-   JSON::Syck |    552.551 |    787.544 |
+   JSON::Syck    |   1481.040 |   1524.869 |
-   JSON::XS   |   5780.463 |   4854.519 |
+   JSON::XS      |  20661.596 |   9541.183 |
-   JSON::XS/2 |   3869.998 |   4798.975 |
+   JSON::XS/2    |  10683.403 |   9416.938 |
-   JSON::XS/3 |   5862.880 |   4798.975 |
+   JSON::XS/3    |  20661.596 |   9400.054 |
-   Storable   |   4445.002 |   5235.027 |
+   Storable      |  19765.806 |  10000.725 |
-   -----------+------------+------------+
+   --------------+------------+------------+
 Again, JSON::XS leads by far (except for Storable which non-surprisingly
-decodes faster).
+decodes a bit faster).
 On large strings containing lots of high Unicode characters, some modules
 (such as JSON::PC) seem to decode faster than JSON::XS, but the result
 will be broken due to missing (or wrong) Unicode handling. Others refuse
 to decode or encode properly, so it was impossible to prepare a fair
 information you might want to make sure that exceptions thrown by JSON::XS
 will not end up in front of untrusted eyes.
 If you are using JSON::XS to return packets to consumption
 by JavaScript scripts in a browser you should have a look at
-L<http://jpsykes.com/47/practical-csrf-and-json-security> to see whether
+L<http://blog.archive.jpsykes.com/47/practical-csrf-and-json-security/> to
-you are vulnerable to some common attack vectors (which really are browser
+see whether you are vulnerable to some common attack vectors (which really
-design bugs, but it is still you who will have to deal with it, as major
+are browser design bugs, but it is still you who will have to deal with
-browser developers care only for features, not about getting security
+it, as major browser developers care only for features, not about getting
-right).
+security right).
 =head1 THREADS
 This module is I<not> guaranteed to be thread safe and there are no

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing JSON-XS/XS.pm (file contents): Revision 1.116 by root, Tue Feb 17 23:41:20 2009 UTC vs. Revision 1.136 by root, Wed Jul 27 15:53:40 2011 UTC

Diff Legend

Comparing JSON-XS/XS.pm (file contents):
Revision 1.116 by root, Tue Feb 17 23:41:20 2009 UTC vs.
Revision 1.136 by root, Wed Jul 27 15:53:40 2011 UTC