[ViewVC] Diff of: cvs/cvsroot/Coro/Coro.pm

Comparing cvsroot/Coro/Coro.pm (file contents):
Revision 1.98 by root, Mon Dec 4 21:56:00 2006 UTC vs.
Revision 1.220 by root, Sun Nov 16 11:12:57 2008 UTC

…		…
2		2
3	Coro - coroutine process abstraction	3	Coro - coroutine process abstraction
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	use Coro;	7	use Coro;
8		8
9	async {	9	async {
10	# some asynchronous thread of execution	10	# some asynchronous thread of execution
		11	print "2\n";
		12	cede; # yield back to main
		13	print "4\n";
11	};	14	};
12		15	print "1\n";
13	# alternatively create an async coroutine like this:	16	cede; # yield to coroutine
14		17	print "3\n";
15	sub some_func : Coro {	18	cede; # and again
16	# some more async code	19
17	}	20	# use locking
18		21	use Coro::Semaphore;
19	cede;	22	my $lock = new Coro::Semaphore;
		23	my $locked;
		24
		25	$lock->down;
		26	$locked = 1;
		27	$lock->up;
20		28
21	=head1 DESCRIPTION	29	=head1 DESCRIPTION
22		30
23	This module collection manages coroutines. Coroutines are similar	31	This module collection manages coroutines. Coroutines are similar to
24	to threads but don't run in parallel at the same time even on SMP	32	threads but don't (in general) run in parallel at the same time even
25	machines. The specific flavor of coroutine use din this module also	33	on SMP machines. The specific flavor of coroutine used in this module
26	guarentees you that it will not switch between coroutines unless	34	also guarantees you that it will not switch between coroutines unless
27	necessary, at easily-identified points in your program, so locking and	35	necessary, at easily-identified points in your program, so locking and
28	parallel access are rarely an issue, making coroutine programming much	36	parallel access are rarely an issue, making coroutine programming much
29	safer than threads programming.	37	safer and easier than threads programming.
30		38
31	(Perl, however, does not natively support real threads but instead does a	39	Unlike a normal perl program, however, coroutines allow you to have
32	very slow and memory-intensive emulation of processes using threads. This	40	multiple running interpreters that share data, which is especially useful
33	is a performance win on Windows machines, and a loss everywhere else).	41	to code pseudo-parallel processes and for event-based programming, such as
		42	multiple HTTP-GET requests running concurrently. See L<Coro::AnyEvent> to
		43	learn more.
		44
		45	Coroutines are also useful because Perl has no support for threads (the so
		46	called "threads" that perl offers are nothing more than the (bad) process
		47	emulation coming from the Windows platform: On standard operating systems
		48	they serve no purpose whatsoever, except by making your programs slow and
		49	making them use a lot of memory. Best disable them when building perl, or
		50	aks your software vendor/distributor to do it for you).
34		51
35	In this module, coroutines are defined as "callchain + lexical variables +	52	In this module, coroutines are defined as "callchain + lexical variables +
36	@_ + $_ + $@ + $/ + C stack), that is, a coroutine has its own callchain,	53	@_ + $_ + $@ + $/ + C stack), that is, a coroutine has its own callchain,
37	its own set of lexicals and its own set of perls most important global	54	its own set of lexicals and its own set of perls most important global
38	variables.	55	variables (see L<Coro::State> for more configuration).
39		56
40	=cut	57	=cut
41		58
42	package Coro;	59	package Coro;
43		60
44	use strict;	61	use strict qw(vars subs);
45	no warnings "uninitialized";	62	no warnings "uninitialized";
46		63
47	use Coro::State;	64	use Coro::State;
48		65
49	use base qw(Coro::State Exporter);	66	use base qw(Coro::State Exporter);
50		67
51	our $idle; # idle handler	68	our $idle; # idle handler
52	our $main; # main coroutine	69	our $main; # main coroutine
53	our $current; # current coroutine	70	our $current; # current coroutine
54		71
55	our $VERSION = '3.1';	72	our $VERSION = 5.0;
56		73
57	our @EXPORT = qw(async cede schedule terminate current unblock_sub);	74	our @EXPORT = qw(async async_pool cede schedule terminate current unblock_sub);
58	our %EXPORT_TAGS = (	75	our %EXPORT_TAGS = (
59	prio => [qw(PRIO_MAX PRIO_HIGH PRIO_NORMAL PRIO_LOW PRIO_IDLE PRIO_MIN)],	76	prio => [qw(PRIO_MAX PRIO_HIGH PRIO_NORMAL PRIO_LOW PRIO_IDLE PRIO_MIN)],
60	);	77	);
61	our @EXPORT_OK = (@{$EXPORT_TAGS{prio}}, qw(nready));	78	our @EXPORT_OK = (@{$EXPORT_TAGS{prio}}, qw(nready));
62		79
63	{
64	my @async;
65	my $init;
66
67	# this way of handling attributes simply is NOT scalable ;()
68	sub import {
69	no strict 'refs';
70
71	Coro->export_to_level (1, @_);
72
73	my $old = *{(caller)[0]."::MODIFY_CODE_ATTRIBUTES"}{CODE};
74	*{(caller)[0]."::MODIFY_CODE_ATTRIBUTES"} = sub {
75	my ($package, $ref) = (shift, shift);
76	my @attrs;
77	for (@_) {
78	if ($_ eq "Coro") {
79	push @async, $ref;
80	unless ($init++) {
81	eval q{
82	sub INIT {
83	&async(pop @async) while @async;
84	}
85	};
86	}
87	} else {
88	push @attrs, $_;
89	}
90	}
91	return $old ? $old->($package, $ref, @attrs) : @attrs;
92	};
93	}
94
95	}
96
97	=over 4	80	=over 4
98		81
99	=item $main	82	=item $Coro::main
100		83
101	This coroutine represents the main program.	84	This variable stores the coroutine object that represents the main
		85	program. While you cna C<ready> it and do most other things you can do to
		86	coroutines, it is mainly useful to compare again C<$Coro::current>, to see
		87	whether you are running in the main program or not.
102		88
103	=cut	89	=cut
104		90
105	$main = new Coro;	91	# $main is now being initialised by Coro::State
106		92
107	=item $current (or as function: current)	93	=item $Coro::current
108		94
109	The current coroutine (the last coroutine switched to). The initial value	95	The coroutine object representing the current coroutine (the last
		96	coroutine that the Coro scheduler switched to). The initial value is
110	is C<$main> (of course).	97	C<$Coro::main> (of course).
111		98
112	This variable is B<strictly> I<read-only>. It is provided for performance	99	This variable is B<strictly> I<read-only>. You can take copies of the
113	reasons. If performance is not essentiel you are encouraged to use the	100	value stored in it and use it as any other coroutine object, but you must
114	C<Coro::current> function instead.	101	not otherwise modify the variable itself.
115		102
116	=cut	103	=cut
117		104
118	# maybe some other module used Coro::Specific before...
119	$main->{specific} = $current->{specific}
120	if $current;
121
122	_set_current $main;
123
124	sub current() { $current }	105	sub current() { $current } # [DEPRECATED]
125		106
126	=item $idle	107	=item $Coro::idle
127		108
128	A callback that is called whenever the scheduler finds no ready coroutines	109	This variable is mainly useful to integrate Coro into event loops. It is
129	to run. The default implementation prints "FATAL: deadlock detected" and	110	usually better to rely on L<Coro::AnyEvent> or LC<Coro::EV>, as this is
130	exits, because the program has no other way to continue.	111	pretty low-level functionality.
		112
		113	This variable stores a callback that is called whenever the scheduler
		114	finds no ready coroutines to run. The default implementation prints
		115	"FATAL: deadlock detected" and exits, because the program has no other way
		116	to continue.
131		117
132	This hook is overwritten by modules such as C<Coro::Timer> and	118	This hook is overwritten by modules such as C<Coro::Timer> and
133	C<Coro::Event> to wait on an external event that hopefully wake up a	119	C<Coro::AnyEvent> to wait on an external event that hopefully wake up a
134	coroutine so the scheduler can run it.	120	coroutine so the scheduler can run it.
135		121
		122	Note that the callback I<must not>, under any circumstances, block
		123	the current coroutine. Normally, this is achieved by having an "idle
		124	coroutine" that calls the event loop and then blocks again, and then
		125	readying that coroutine in the idle handler.
		126
		127	See L<Coro::Event> or L<Coro::AnyEvent> for examples of using this
		128	technique.
		129
136	Please note that if your callback recursively invokes perl (e.g. for event	130	Please note that if your callback recursively invokes perl (e.g. for event
137	handlers), then it must be prepared to be called recursively.	131	handlers), then it must be prepared to be called recursively itself.
138		132
139	=cut	133	=cut
140		134
141	$idle = sub {	135	$idle = sub {
142	require Carp;	136	require Carp;
143	Carp::croak ("FATAL: deadlock detected");	137	Carp::croak ("FATAL: deadlock detected");
144	};	138	};
145		139
		140	sub _cancel {
		141	my ($self) = @_;
		142
		143	# free coroutine data and mark as destructed
		144	$self->_destroy
		145	or return;
		146
		147	# call all destruction callbacks
		148	$_->(@{$self->{_status}})
		149	for @{ delete $self->{_on_destroy} \|\| [] };
		150	}
		151
146	# this coroutine is necessary because a coroutine	152	# this coroutine is necessary because a coroutine
147	# cannot destroy itself.	153	# cannot destroy itself.
148	my @destroy;	154	my @destroy;
		155	my $manager;
		156
149	my $manager; $manager = new Coro sub {	157	$manager = new Coro sub {
150	while () {	158	while () {
151	# by overwriting the state object with the manager we destroy it	159	(shift @destroy)->_cancel
152	# while still being able to schedule this coroutine (in case it has
153	# been readied multiple times. this is harmless since the manager
154	# can be called as many times as neccessary and will always
155	# remove itself from the runqueue
156	while (@destroy) {	160	while @destroy;
157	my $coro = pop @destroy;
158	$coro->{status} \|\|= [];
159	$_->ready for @{delete $coro->{join} \|\| []};
160		161
161	# the next line destroys the coro state, but keeps the
162	# coroutine itself intact (we basically make it a zombie
163	# coroutine that always runs the manager thread, so it's possible
164	# to transfer() to this coroutine).
165	$coro->_clone_state_from ($manager);
166	}
167	&schedule;	162	&schedule;
168	}	163	}
169	};	164	};
170		165	$manager->{desc} = "[coro manager]";
171	# static methods. not really.	166	$manager->prio (PRIO_MAX);
172		167
173	=back	168	=back
174		169
175	=head2 STATIC METHODS	170	=head2 SIMPLE COROUTINE CREATION
176
177	Static methods are actually functions that operate on the current coroutine only.
178		171
179	=over 4	172	=over 4
180		173
181	=item async { ... } [@args...]	174	=item async { ... } [@args...]
182		175
183	Create a new asynchronous coroutine and return it's coroutine object	176	Create a new coroutine and return it's coroutine object (usually
184	(usually unused). When the sub returns the new coroutine is automatically	177	unused). The coroutine will be put into the ready queue, so
		178	it will start running automatically on the next scheduler run.
		179
		180	The first argument is a codeblock/closure that should be executed in the
		181	coroutine. When it returns argument returns the coroutine is automatically
185	terminated.	182	terminated.
186		183
187	Calling C<exit> in a coroutine will not work correctly, so do not do that.	184	The remaining arguments are passed as arguments to the closure.
188		185
189	When the coroutine dies, the program will exit, just as in the main	186	See the C<Coro::State::new> constructor for info about the coroutine
190	program.	187	environment in which coroutines are executed.
191		188
		189	Calling C<exit> in a coroutine will do the same as calling exit outside
		190	the coroutine. Likewise, when the coroutine dies, the program will exit,
		191	just as it would in the main program.
		192
		193	If you do not want that, you can provide a default C<die> handler, or
		194	simply avoid dieing (by use of C<eval>).
		195
192	# create a new coroutine that just prints its arguments	196	Example: Create a new coroutine that just prints its arguments.
		197
193	async {	198	async {
194	print "@_\n";	199	print "@_\n";
195	} 1,2,3,4;	200	} 1,2,3,4;
196		201
197	=cut	202	=cut
198		203
199	sub async(&@) {	204	sub async(&@) {
200	my $pid = new Coro @_;	205	my $coro = new Coro @_;
201	$pid->ready;	206	$coro->ready;
202	$pid	207	$coro
203	}	208	}
		209
		210	=item async_pool { ... } [@args...]
		211
		212	Similar to C<async>, but uses a coroutine pool, so you should not call
		213	terminate or join on it (although you are allowed to), and you get a
		214	coroutine that might have executed other code already (which can be good
		215	or bad :).
		216
		217	On the plus side, this function is faster than creating (and destroying)
		218	a completly new coroutine, so if you need a lot of generic coroutines in
		219	quick successsion, use C<async_pool>, not C<async>.
		220
		221	The code block is executed in an C<eval> context and a warning will be
		222	issued in case of an exception instead of terminating the program, as
		223	C<async> does. As the coroutine is being reused, stuff like C<on_destroy>
		224	will not work in the expected way, unless you call terminate or cancel,
		225	which somehow defeats the purpose of pooling (but is fine in the
		226	exceptional case).
		227
		228	The priority will be reset to C<0> after each run, tracing will be
		229	disabled, the description will be reset and the default output filehandle
		230	gets restored, so you can change all these. Otherwise the coroutine will
		231	be re-used "as-is": most notably if you change other per-coroutine global
		232	stuff such as C<$/> you I<must needs> revert that change, which is most
		233	simply done by using local as in: C<< local $/ >>.
		234
		235	The idle pool size is limited to C<8> idle coroutines (this can be
		236	adjusted by changing $Coro::POOL_SIZE), but there can be as many non-idle
		237	coros as required.
		238
		239	If you are concerned about pooled coroutines growing a lot because a
		240	single C<async_pool> used a lot of stackspace you can e.g. C<async_pool
		241	{ terminate }> once per second or so to slowly replenish the pool. In
		242	addition to that, when the stacks used by a handler grows larger than 16kb
		243	(adjustable via $Coro::POOL_RSS) it will also be destroyed.
		244
		245	=cut
		246
		247	our $POOL_SIZE = 8;
		248	our $POOL_RSS = 16 * 1024;
		249	our @async_pool;
		250
		251	sub pool_handler {
		252	my $cb;
		253
		254	while () {
		255	eval {
		256	while () {
		257	_pool_1 $cb;
		258	&$cb;
		259	_pool_2 $cb;
		260	&schedule;
		261	}
		262	};
		263
		264	if ($@) {
		265	last if $@ eq "\3async_pool terminate\2\n";
		266	warn $@;
		267	}
		268	}
		269	}
		270
		271	sub async_pool(&@) {
		272	# this is also inlined into the unblock_scheduler
		273	my $coro = (pop @async_pool) \|\| new Coro \&pool_handler;
		274
		275	$coro->{_invoke} = [@_];
		276	$coro->ready;
		277
		278	$coro
		279	}
		280
		281	=back
		282
		283	=head2 STATIC METHODS
		284
		285	Static methods are actually functions that operate on the current coroutine.
		286
		287	=over 4
204		288
205	=item schedule	289	=item schedule
206		290
207	Calls the scheduler. Please note that the current coroutine will not be put	291	Calls the scheduler. The scheduler will find the next coroutine that is
		292	to be run from the ready queue and switches to it. The next coroutine
		293	to be run is simply the one with the highest priority that is longest
		294	in its ready queue. If there is no coroutine ready, it will clal the
		295	C<$Coro::idle> hook.
		296
		297	Please note that the current coroutine will I<not> be put into the ready
208	into the ready queue, so calling this function usually means you will	298	queue, so calling this function usually means you will never be called
209	never be called again unless something else (e.g. an event handler) calls	299	again unless something else (e.g. an event handler) calls C<< ->ready >>,
210	ready.	300	thus waking you up.
		301
		302	This makes C<schedule> I<the> generic method to use to block the current
		303	coroutine and wait for events: first you remember the current coroutine in
		304	a variable, then arrange for some callback of yours to call C<< ->ready
		305	>> on that once some event happens, and last you call C<schedule> to put
		306	yourself to sleep. Note that a lot of things can wake your coroutine up,
		307	so you need to check whether the event indeed happened, e.g. by storing the
		308	status in a variable.
211		309
212	The canonical way to wait on external events is this:	310	The canonical way to wait on external events is this:
213		311
214	{	312	{
215	# remember current coroutine	313	# remember current coroutine
…		…
220	# wake up sleeping coroutine	318	# wake up sleeping coroutine
221	$current->ready;	319	$current->ready;
222	undef $current;	320	undef $current;
223	};	321	};
224		322
225	# call schedule until event occured.	323	# call schedule until event occurred.
226	# in case we are woken up for other reasons	324	# in case we are woken up for other reasons
227	# (current still defined), loop.	325	# (current still defined), loop.
228	Coro::schedule while $current;	326	Coro::schedule while $current;
229	}	327	}
230		328
231	=item cede	329	=item cede
232		330
233	"Cede" to other coroutines. This function puts the current coroutine into the	331	"Cede" to other coroutines. This function puts the current coroutine into
234	ready queue and calls C<schedule>, which has the effect of giving up the	332	the ready queue and calls C<schedule>, which has the effect of giving
235	current "timeslice" to other coroutines of the same or higher priority.	333	up the current "timeslice" to other coroutines of the same or higher
		334	priority. Once your coroutine gets its turn again it will automatically be
		335	resumed.
		336
		337	This function is often called C<yield> in other languages.
		338
		339	=item Coro::cede_notself
		340
		341	Works like cede, but is not exported by default and will cede to I<any>
		342	coroutine, regardless of priority. This is useful sometimes to ensure
		343	progress is made.
236		344
237	=item terminate [arg...]	345	=item terminate [arg...]
238		346
239	Terminates the current coroutine with the given status values (see L<cancel>).	347	Terminates the current coroutine with the given status values (see L<cancel>).
		348
		349	=item killall
		350
		351	Kills/terminates/cancels all coroutines except the currently running
		352	one. This is useful after a fork, either in the child or the parent, as
		353	usually only one of them should inherit the running coroutines.
		354
		355	Note that while this will try to free some of the main programs resources,
		356	you cannot free all of them, so if a coroutine that is not the main
		357	program calls this function, there will be some one-time resource leak.
240		358
241	=cut	359	=cut
242		360
243	sub terminate {	361	sub terminate {
244	$current->cancel (@_);	362	$current->cancel (@_);
245	}	363	}
246		364
		365	sub killall {
		366	for (Coro::State::list) {
		367	$_->cancel
		368	if $_ != $current && UNIVERSAL::isa $_, "Coro";
		369	}
		370	}
		371
247	=back	372	=back
248		373
249	# dynamic methods
250
251	=head2 COROUTINE METHODS	374	=head2 COROUTINE METHODS
252		375
253	These are the methods you can call on coroutine objects.	376	These are the methods you can call on coroutine objects (or to create
		377	them).
254		378
255	=over 4	379	=over 4
256		380
257	=item new Coro \&sub [, @args...]	381	=item new Coro \&sub [, @args...]
258		382
259	Create a new coroutine and return it. When the sub returns the coroutine	383	Create a new coroutine and return it. When the sub returns, the coroutine
260	automatically terminates as if C<terminate> with the returned values were	384	automatically terminates as if C<terminate> with the returned values were
261	called. To make the coroutine run you must first put it into the ready queue	385	called. To make the coroutine run you must first put it into the ready
262	by calling the ready method.	386	queue by calling the ready method.
263		387
264	Calling C<exit> in a coroutine will not work correctly, so do not do that.	388	See C<async> and C<Coro::State::new> for additional info about the
		389	coroutine environment.
265		390
266	=cut	391	=cut
267		392
268	sub _run_coro {	393	sub _run_coro {
269	terminate &{+shift};	394	terminate &{+shift};
…		…
275	$class->SUPER::new (\&_run_coro, @_)	400	$class->SUPER::new (\&_run_coro, @_)
276	}	401	}
277		402
278	=item $success = $coroutine->ready	403	=item $success = $coroutine->ready
279		404
280	Put the given coroutine into the ready queue (according to it's priority)	405	Put the given coroutine into the end of its ready queue (there is one
281	and return true. If the coroutine is already in the ready queue, do nothing	406	queue for each priority) and return true. If the coroutine is already in
282	and return false.	407	the ready queue, do nothing and return false.
		408
		409	This ensures that the scheduler will resume this coroutine automatically
		410	once all the coroutines of higher priority and all coroutines of the same
		411	priority that were put into the ready queue earlier have been resumed.
283		412
284	=item $is_ready = $coroutine->is_ready	413	=item $is_ready = $coroutine->is_ready
285		414
286	Return wether the coroutine is currently the ready queue or not,	415	Return whether the coroutine is currently the ready queue or not,
287		416
288	=item $coroutine->cancel (arg...)	417	=item $coroutine->cancel (arg...)
289		418
290	Terminates the given coroutine and makes it return the given arguments as	419	Terminates the given coroutine and makes it return the given arguments as
291	status (default: the empty list).	420	status (default: the empty list). Never returns if the coroutine is the
		421	current coroutine.
292		422
293	=cut	423	=cut
294		424
295	sub cancel {	425	sub cancel {
296	my $self = shift;	426	my $self = shift;
297	$self->{status} = [@_];	427	$self->{_status} = [@_];
		428
		429	if ($current == $self) {
298	push @destroy, $self;	430	push @destroy, $self;
299	$manager->ready;	431	$manager->ready;
300	&schedule if $current == $self;	432	&schedule while 1;
		433	} else {
		434	$self->_cancel;
		435	}
301	}	436	}
		437
		438	=item $coroutine->throw ([$scalar])
		439
		440	If C<$throw> is specified and defined, it will be thrown as an exception
		441	inside the coroutine at the next convenient point in time (usually after
		442	it gains control at the next schedule/transfer/cede). Otherwise clears the
		443	exception object.
		444
		445	The exception object will be thrown "as is" with the specified scalar in
		446	C<$@>, i.e. if it is a string, no line number or newline will be appended
		447	(unlike with C<die>).
		448
		449	This can be used as a softer means than C<cancel> to ask a coroutine to
		450	end itself, although there is no guarantee that the exception will lead to
		451	termination, and if the exception isn't caught it might well end the whole
		452	program.
		453
		454	You might also think of C<throw> as being the moral equivalent of
		455	C<kill>ing a coroutine with a signal (in this case, a scalar).
302		456
303	=item $coroutine->join	457	=item $coroutine->join
304		458
305	Wait until the coroutine terminates and return any values given to the	459	Wait until the coroutine terminates and return any values given to the
306	C<terminate> or C<cancel> functions. C<join> can be called multiple times	460	C<terminate> or C<cancel> functions. C<join> can be called concurrently
307	from multiple coroutine.	461	from multiple coroutines, and all will be resumed and given the status
		462	return once the C<$coroutine> terminates.
308		463
309	=cut	464	=cut
310		465
311	sub join {	466	sub join {
312	my $self = shift;	467	my $self = shift;
		468
313	unless ($self->{status}) {	469	unless ($self->{_status}) {
314	push @{$self->{join}}, $current;	470	my $current = $current;
315	&schedule;	471
		472	push @{$self->{_on_destroy}}, sub {
		473	$current->ready;
		474	undef $current;
		475	};
		476
		477	&schedule while $current;
316	}	478	}
		479
317	wantarray ? @{$self->{status}} : $self->{status}[0];	480	wantarray ? @{$self->{_status}} : $self->{_status}[0];
		481	}
		482
		483	=item $coroutine->on_destroy (\&cb)
		484
		485	Registers a callback that is called when this coroutine gets destroyed,
		486	but before it is joined. The callback gets passed the terminate arguments,
		487	if any, and I<must not> die, under any circumstances.
		488
		489	=cut
		490
		491	sub on_destroy {
		492	my ($self, $cb) = @_;
		493
		494	push @{ $self->{_on_destroy} }, $cb;
318	}	495	}
319		496
320	=item $oldprio = $coroutine->prio ($newprio)	497	=item $oldprio = $coroutine->prio ($newprio)
321		498
322	Sets (or gets, if the argument is missing) the priority of the	499	Sets (or gets, if the argument is missing) the priority of the
…		…
345	higher values mean lower priority, just as in unix).	522	higher values mean lower priority, just as in unix).
346		523
347	=item $olddesc = $coroutine->desc ($newdesc)	524	=item $olddesc = $coroutine->desc ($newdesc)
348		525
349	Sets (or gets in case the argument is missing) the description for this	526	Sets (or gets in case the argument is missing) the description for this
350	coroutine. This is just a free-form string you can associate with a coroutine.	527	coroutine. This is just a free-form string you can associate with a
		528	coroutine.
		529
		530	This method simply sets the C<< $coroutine->{desc} >> member to the given
		531	string. You can modify this member directly if you wish.
351		532
352	=cut	533	=cut
353		534
354	sub desc {	535	sub desc {
355	my $old = $_[0]{desc};	536	my $old = $_[0]{desc};
…		…
364	=over 4	545	=over 4
365		546
366	=item Coro::nready	547	=item Coro::nready
367		548
368	Returns the number of coroutines that are currently in the ready state,	549	Returns the number of coroutines that are currently in the ready state,
369	i.e. that can be swicthed to. The value C<0> means that the only runnable	550	i.e. that can be switched to by calling C<schedule> directory or
		551	indirectly. The value C<0> means that the only runnable coroutine is the
370	coroutine is the currently running one, so C<cede> would have no effect,	552	currently running one, so C<cede> would have no effect, and C<schedule>
371	and C<schedule> would cause a deadlock unless there is an idle handler	553	would cause a deadlock unless there is an idle handler that wakes up some
372	that wakes up some coroutines.	554	coroutines.
		555
		556	=item my $guard = Coro::guard { ... }
		557
		558	This creates and returns a guard object. Nothing happens until the object
		559	gets destroyed, in which case the codeblock given as argument will be
		560	executed. This is useful to free locks or other resources in case of a
		561	runtime error or when the coroutine gets canceled, as in both cases the
		562	guard block will be executed. The guard object supports only one method,
		563	C<< ->cancel >>, which will keep the codeblock from being executed.
		564
		565	Example: set some flag and clear it again when the coroutine gets canceled
		566	or the function returns:
		567
		568	sub do_something {
		569	my $guard = Coro::guard { $busy = 0 };
		570	$busy = 1;
		571
		572	# do something that requires $busy to be true
		573	}
		574
		575	=cut
		576
		577	sub guard(&) {
		578	bless \(my $cb = $_[0]), "Coro::guard"
		579	}
		580
		581	sub Coro::guard::cancel {
		582	${$_[0]} = sub { };
		583	}
		584
		585	sub Coro::guard::DESTROY {
		586	${$_[0]}->();
		587	}
		588
373		589
374	=item unblock_sub { ... }	590	=item unblock_sub { ... }
375		591
376	This utility function takes a BLOCK or code reference and "unblocks" it,	592	This utility function takes a BLOCK or code reference and "unblocks" it,
377	returning the new coderef. This means that the new coderef will return	593	returning a new coderef. Unblocking means that calling the new coderef
378	immediately without blocking, returning nothing, while the original code	594	will return immediately without blocking, returning nothing, while the
379	ref will be called (with parameters) from within its own coroutine.	595	original code ref will be called (with parameters) from within another
		596	coroutine.
380		597
381	The reason this fucntion exists is that many event libraries (such as the	598	The reason this function exists is that many event libraries (such as the
382	venerable L<Event\|Event> module) are not coroutine-safe (a weaker form	599	venerable L<Event\|Event> module) are not coroutine-safe (a weaker form
383	of thread-safety). This means you must not block within event callbacks,	600	of thread-safety). This means you must not block within event callbacks,
384	otherwise you might suffer from crashes or worse.	601	otherwise you might suffer from crashes or worse. The only event library
		602	currently known that is safe to use without C<unblock_sub> is L<EV>.
385		603
386	This function allows your callbacks to block by executing them in another	604	This function allows your callbacks to block by executing them in another
387	coroutine where it is safe to block. One example where blocking is handy	605	coroutine where it is safe to block. One example where blocking is handy
388	is when you use the L<Coro::AIO\|Coro::AIO> functions to save results to	606	is when you use the L<Coro::AIO\|Coro::AIO> functions to save results to
389	disk.	607	disk, for example.
390		608
391	In short: simply use C<unblock_sub { ... }> instead of C<sub { ... }> when	609	In short: simply use C<unblock_sub { ... }> instead of C<sub { ... }> when
392	creating event callbacks that want to block.	610	creating event callbacks that want to block.
393		611
394	=cut	612	If your handler does not plan to block (e.g. simply sends a message to
		613	another coroutine, or puts some other coroutine into the ready queue),
		614	there is no reason to use C<unblock_sub>.
395		615
396	our @unblock_pool;	616	Note that you also need to use C<unblock_sub> for any other callbacks that
		617	are indirectly executed by any C-based event loop. For example, when you
		618	use a module that uses L<AnyEvent> (and you use L<Coro::AnyEvent>) and it
		619	provides callbacks that are the result of some event callback, then you
		620	must not block either, or use C<unblock_sub>.
		621
		622	=cut
		623
397	our @unblock_queue;	624	our @unblock_queue;
398	our $UNBLOCK_POOL_SIZE = 2;
399		625
400	sub unblock_handler_ {	626	# we create a special coro because we want to cede,
401	while () {	627	# to reduce pressure on the coro pool (because most callbacks
402	my ($cb, @arg) = @{ delete $Coro::current->{arg} };	628	# return immediately and can be reused) and because we cannot cede
403	$cb->(@arg);	629	# inside an event callback.
404
405	last if @unblock_pool >= $UNBLOCK_POOL_SIZE;
406	push @unblock_pool, $Coro::current;
407	schedule;
408	}
409	}
410
411	our $unblock_scheduler = async {	630	our $unblock_scheduler = new Coro sub {
412	while () {	631	while () {
413	while (my $cb = pop @unblock_queue) {	632	while (my $cb = pop @unblock_queue) {
414	my $handler = (pop @unblock_pool or new Coro \&unblock_handler_);	633	# this is an inlined copy of async_pool
415	$handler->{arg} = $cb;	634	my $coro = (pop @async_pool) \|\| new Coro \&pool_handler;
		635
		636	$coro->{_invoke} = $cb;
416	$handler->ready;	637	$coro->ready;
417	cede;	638	cede; # for short-lived callbacks, this reduces pressure on the coro pool
418	}	639	}
419		640	schedule; # sleep well
420	schedule;
421	}	641	}
422	};	642	};
		643	$unblock_scheduler->{desc} = "[unblock_sub scheduler]";
423		644
424	sub unblock_sub(&) {	645	sub unblock_sub(&) {
425	my $cb = shift;	646	my $cb = shift;
426		647
427	sub {	648	sub {
428	push @unblock_queue, [$cb, @_];	649	unshift @unblock_queue, [$cb, @_];
429	$unblock_scheduler->ready;	650	$unblock_scheduler->ready;
430	}	651	}
431	}	652	}
432		653
433	=back	654	=back
…		…
436		657
437	1;	658	1;
438		659
439	=head1 BUGS/LIMITATIONS	660	=head1 BUGS/LIMITATIONS
440		661
441	- you must make very sure that no coro is still active on global	662	=over 4
442	destruction. very bad things might happen otherwise (usually segfaults).
443		663
		664	=item fork with pthread backend
		665
		666	When Coro is compiled using the pthread backend (which isn't recommended
		667	but required on many BSDs as their libcs are completely broken), then
		668	coroutines will not survive a fork. There is no known workaround except to
		669	fix your libc and use a saner backend.
		670
		671	=item perl process emulation ("threads")
		672
444	- this module is not thread-safe. You should only ever use this module	673	This module is not perl-pseudo-thread-safe. You should only ever use this
445	from the same thread (this requirement might be losened in the future	674	module from the same thread (this requirement might be removed in the
446	to allow per-thread schedulers, but Coro::State does not yet allow	675	future to allow per-thread schedulers, but Coro::State does not yet allow
447	this).	676	this). I recommend disabling thread support and using processes, as having
		677	the windows process emulation enabled under unix roughly halves perl
		678	performance, even when not used.
		679
		680	=item coroutine switching not signal safe
		681
		682	You must not switch to another coroutine from within a signal handler
		683	(only relevant with %SIG - most event libraries provide safe signals).
		684
		685	That means you I<MUST NOT> call any fucntion that might "block" the
		686	current coroutine - C<cede>, C<schedule> C<< Coro::Semaphore->down >> or
		687	anything that calls those. Everything else, including calling C<ready>,
		688	works.
		689
		690	=back
		691
448		692
449	=head1 SEE ALSO	693	=head1 SEE ALSO
450		694
		695	Event-Loop integration: L<Coro::AnyEvent>, L<Coro::EV>, L<Coro::Event>.
		696
		697	Debugging: L<Coro::Debug>.
		698
451	Support/Utility: L<Coro::Cont>, L<Coro::Specific>, L<Coro::State>, L<Coro::Util>.	699	Support/Utility: L<Coro::Specific>, L<Coro::Util>.
452		700
453	Locking/IPC: L<Coro::Signal>, L<Coro::Channel>, L<Coro::Semaphore>, L<Coro::SemaphoreSet>, L<Coro::RWLock>.	701	Locking/IPC: L<Coro::Signal>, L<Coro::Channel>, L<Coro::Semaphore>, L<Coro::SemaphoreSet>, L<Coro::RWLock>.
454		702
455	Event/IO: L<Coro::Timer>, L<Coro::Event>, L<Coro::Handle>, L<Coro::Socket>, L<Coro::Select>.	703	IO/Timers: L<Coro::Timer>, L<Coro::Handle>, L<Coro::Socket>, L<Coro::AIO>.
456		704
457	Embedding: L<Coro:MakeMaker>	705	Compatibility: L<Coro::LWP>, L<Coro::BDB>, L<Coro::Storable>, L<Coro::Select>.
		706
		707	XS API: L<Coro::MakeMaker>.
		708
		709	Low level Configuration, Coroutine Environment: L<Coro::State>.
458		710
459	=head1 AUTHOR	711	=head1 AUTHOR
460		712
461	Marc Lehmann <schmorp@schmorp.de>	713	Marc Lehmann <schmorp@schmorp.de>
462	http://home.schmorp.de/	714	http://home.schmorp.de/

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing cvsroot/Coro/Coro.pm (file contents): Revision 1.98 by root, Mon Dec 4 21:56:00 2006 UTC vs. Revision 1.220 by root, Sun Nov 16 11:12:57 2008 UTC

Diff Legend

Comparing cvsroot/Coro/Coro.pm (file contents):
Revision 1.98 by root, Mon Dec 4 21:56:00 2006 UTC vs.
Revision 1.220 by root, Sun Nov 16 11:12:57 2008 UTC