[ViewVC] Diff of: cvs/deliantra/Deliantra-Client/pod/command

Comparing deliantra/Deliantra-Client/pod/command_help.pod (file contents):
Revision 1.14 by root, Sun Mar 18 03:03:36 2007 UTC vs.
Revision 1.25 by elmex, Wed Oct 17 11:51:11 2007 UTC

-=head1 Crossfire+ Command ListingX<command>
+=head1 Deliantra Command ListingX<command>
 =head2 accept-invitation
 Accepts an invitation previously issued by another player using the invite
 command. This will transfer you to the location you were invited to.
 will be dropped. A collection of 5 scrolls will not be dropped.
 See also B<dropall> and mouse button control within client for dropping
 objects.
+=head2 cointoss
+Tosses a coin and reports the outcome to you and other players on the same
+map, much like the say command does.
+=head2 orcknuckle
+Throws your orcknuckle set and reports the outcome to you and other
+players on the same map, much like the say command does. Your first
+three orcknuckle throws can report I<beholder>, I<ghost>, I<knight>,
+I<princess>, I<dragon>, while the fourth can additionally roll up to
+I<orc>.
 =head2 dropall
    dropall [type]
 B<dropall> drops all items in your inventory to the ground, excepting
 =head2 gsay
 If you are in a party (party join or party form), you will be able to message
 only your party. Even people standing right next to you can't hear it.
-=head2 golem
-ERROR: not a command, but another help topic => move to a different file maybe?
-Golems are creatures that the player has some control over. Note that many
-summoned creatures are considered golems, even if they are not called
-golems.
-If you have a golem in control your spell type will be listed as golem,
-with the creature name in parantheses.
-To control your golem, just press the fire key in the direction you want
-your golem to move. Your golem will then start moving in that direction,
-and keep moving in that direction until you change its direction.
-Note that once you leave the map that the golem is on, the golem will
-disappear. Also, once you select another spell to cast, or change your
-range type, your golem will disappear.
 =head2 help
 Gives you online help for the command or help topic specified.
+=head2 hintmode (show|mark|hide)
+   hintmode show|mark|hide
+Sets the I<hint mode> to the given value: Throughout the game you can find
+hints that sometimes help you to solve a puzzle or manage a situation
+better than without. You can change the display of these hints with this
+command:
+=over 4
+=item show
+Show the hints (the default mode).
+=item mark
+Do not show the hints themselves, but notify you when a hint would have
+been available.
+=item hide
+Hide all hints: You will not be able to tell wether there is a hint
+available or not.
+=back
 =head2 hiscore
 Shows a list of the highest level players in the game.
 One can never transport from nor to an unholy place. That means, one can
 not be saved out of jail using invite.
 =head2 invoke
-The invoke command is used
+The invoke command is used to cast a spell immediately, or when it is
-to cast a spell immediately,
+necessary to give a parameter to the spell. Invoke will not set the range
-or when it is necessary to give
+weapon.
-a parameter to the spell. Invoke
-will not set the range weapon.
 Examples:
-'invoke restoration
+   invoke restoration
-'invoke magic rune of large fireball
+   invoke magic rune of large fireball
-'invoke reincarnation of Iamdead
+   invoke reincarnation of Iamdead
-'invoke create food of waybread
+   invoke create food of waybread
-It is very helpful to bind healing
+It is very helpful to bind healing spells to keys, for example go to your
-spells to keys like this:
+I<playerbook>, tab I<spells>, the press the right mosue button on the
+spell I<medium healing> and choose C<bind invoke ... to a key>. It is
+recommended to bind a healing spell or potion to an easily-accessible-key,
+such as '1'.
-'bind invoke medium healing
-c
-the c key now casts medium healing
-instantly
-=head2 keys
-ERROR: not a command, but another help topic => move to a different file maybe?
-ERROR: its wrong anyways
-These are the basic movement
-keys:
-    yku
-    h l
-    bjn
-Running is done by holding
-control and move. Running
-is recommended.
-Firing the range weapon (help range)
-is done by holding shift and
-move.
-'help mouse for help on what the
-mouse buttons do.
-'help melee for advice on how to
-fight
-'help traps for help with finding
-and disarming traps
 =head2 killpets
    killpets [name]
 The rest is information the mapper may or may not provide. Often, this is
 the mapper's name, email and map creation date as this example shows.
 =head2 maps
-[crossfire+]
    maps <mapname>
 Shows a list of maps matching the regex <mapname> that are currently being
 known to the server. The different fields are Pl, I, Svd, Reset and Path:
 emergency save), at most 20 seconds of gameplay are lost.
 =item Reset: the minimum number of seconds the map will stay as is (will not reset).
 Most maps will not reset as long as players are on it, and usually the
-reset counter only starts going down when all players left the map.
+reset counter only starts going down when all players left the map. Some
+maps will never reset in the common sense, these are usually marked with a
+very high number (sucha s C<1e+99>).
 =item Path: the name that uniquely identifies the map, can be used for goto etc.
 =back
 finds.
 =head2 motd
 Shows the message of the day. It takes no arguments.
-=head2 melee
-ERROR: not a command, but another help topic => move to a different file maybe?
-You fight to kill monsters. You can either use magic or weapons.
-To use weapons, simply wield a weapon (and armour!) and move into the
-monster you want to attack.
-To use magic or bows, read
-'help spells
-and
-'help range
-and
-'help cast
-and
-'help invoke
-=head2 mode
-ERROR: not a command, but another help topic => move to a different file maybe?
-The mode commands are as follows:
-Applymode, adjusts how items are applied
-Bowmode, adjusts the way bows work
-Peaceful, sets how you react to other players
-Petmode, adjusts how your pets behave
-=head2 mouse
-ERROR: not a command, but another help topic => move to a different file maybe?
-The mouse isn't a great way to move your character. It'll work, but you'll
-be handicapped unless you use the keyboard for this. However, the mouse
-has the following inventory uses:
-Middle button on item:  apply
-or equip
-Right button:  drop or pickup
-item on ground
-Left button: info on item
-=head2 move
-ERROR: not a command, but another help topic => move to a different file maybe?
-ERROR: same as "keys"?
-These are the basic movement
-keys:
-    yku
-    h l
-    bjn
-Running is done by holding
-control and move. Running
-is recommended.
-Firing the range weapon (help range)
-is done by holding shift and
-move.
-'help mouse  for help on what the
-mouse buttons do.
-'help melee for advice on how to
-fight
-'help traps for help with finding
-and disarming traps
 =head2 output-count
    output-count [lines]
 buffer has its own time value, and will be flushed independantly. The
 default value is usually less than a second.
 See also L<output-sync>.
+=head2 output-rate
-=head2 output-rate [bytes per second]
+   output-rate [bytes per second]
 Show the current setting of the output-rate, or set it to the provided
-value.  The server will try not to send (much) more than this many bytes
+value. The server will try very hard not to send more than this many bytes
 per second to your client. If the rate is exceeded, the server tries to
-hold back less important information (such as new images), to increase
+hold back less important information (such as new images) to increase
+responsiveness.
-responsiveness. The server-side default is usually quite high, around
+The server-side default is usually quite high, around 100000. If the
-100000, so if you have a slow link and want to be able to control your
+server is running on a Linux kernel, it will adjust to the actual
-character even when downloading faces, set this to a lower value, such as
+bandwidth available, and output-rate only sets an upper bound. That is,
-7000 (for ISDN).
+the server will automatically set an optimal send rate and adjusting your
+output-rate is not required.
 =head2 output-sync
    output-sync [seconds]
 Goldcoins have a value density of 66,
 Density 10 will pickup silver, gold, rings, wands, books, and scrolls.
 Artifacts are also picked up.
 =head2 prepare
 The same as cast. Usage:
    prepare <spell>
-=head2 X<quests>quests (|finished|.*)
-The quests command lists the quests you are doing or have completed.
-Parameters are:
-=over 4
-=item no arguments: displays current quests.
-=item B<finished>: displays finished quests;
-=item anything else: displays details for quests (finished or not) with name containing the given string.
-=back
 =head2 quit
 Deletes your character from the server. If you want to quit the session
 without deleting your character, you must use a I<Bed to Reality>. Find a
 bed (probably in a building close to where you entered the game), get on
 top of it, and apply it using B<Tab> ro the B<apply> command.
 =head2 range
 Your range weapon can be one of several weapons, a spell you cast, a
 bow-and-arrow, a rod, or a wand, to name a few.
 Your range weapon is fired when you press SHIFT-direction, and will be
 fired in that direction.
 =head2 ready_skill
    ready_skill <name of skill>
 readied, some need to be actively used by "firing" them.
 If you just want to invoke a skill once, leaving your range slot
 untouched, use L<use_skill> instead.
 =head2 rename
 Changes/removes the custom name of given item (or the marked one).
    rename oldname to newname
 If the new name is empty (i.e. C<"">), then the original (unrenamed) name
 will be restored.
 Note: maximum allowed name length is 127 characters.
-=head2 reply
-   reply <message>
-Similar to tell, but instead of having to supply a username, it replies
-to the last player that sent you a tell. This is a bit racy (e.g. when
-somebody else tells you something while you type and you do not realise
-that), so be careful not to supply confidential information in the
-message.
 =head2 resistances
 This shows you the resistances you have to specific attack types.
 If you have for example "cold +20", it means you get 20% damage done
 Toggles between sound enabled and disabled. This has no relevance to the
 sound settings of the client, it only governs wether the server will send
 sound effect command to the client and is enabled if the client supports
 sound (i.e. always for cfplus).
+=head2 sourcecode
+This command displays the means to download the sourcecode (server code,
+maps and archetypes) used to implement this version of the game.
+Every player has the right to download and modify the source code of the
+server, as required by both the GNU General Public License and the GNU
+Affero General Public license.
+If you modify your version of the server, you will have to provide a means
+to download the modified sources (and resources) via this command. If you
+run an unmodified version of the server, the default will do.
 =head2 statistics
 B<statistics> shows various useful information about your character.
 None of the information it shows is stuff that is not contained in the
 documentation.
 thrown away. God-given items can not be thrown. You need the skill throwing
 for this to work.
 =head2 time
-Shows the Crossfire in-game time, not the server time. It looks like this:
+Shows the Deliantra in-game time, not the server time. It looks like this:
    It is 52 minutes past 8 o'clock am, on the Day of the Bull
    The 2nd Day of the Month of the Frost Giant, Year 63
    Time of Year: The Season of New Year
    title <new title>
    title clear   # Sets your title back to your race.
 Dragons cannot set their title because it changes during the game.
-=head2 traps
-ERROR: not a command, but another help topic => move to a different file maybe?
-I recommend the following
-keybindings
-'bind search
-s
-'bind disarm
-d
-Then you can use the 's' and
-'d' keys for searching for and
-disarming traps.
-Traps appear at random in doors and in chests. Search those before you
-open them up. Search by going near where you suspect a trap, and type 's'
 =head2 unignore
    unignore <login>
 Cancels all ignores set for the specified login. See B<ignore>.
 The wimpy level is the amount of health points (hp) that may be left before you
 automatically run away. This may be useful in hand-to-hand combats but should
 not be used when the opponent attacks with spells.
 =head1 Authors
 Parts of this document were originally taken from the crossfire server
 help files with unknwon authors.
-Adapted for use by I<cfplus>, enhanced and corrected by Pippijn van
+Adapted for use by I<deliantra>, enhanced and corrected by Pippijn van
 Steenhoven and Marc A. Lehmann.

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing deliantra/Deliantra-Client/pod/command_help.pod (file contents): Revision 1.14 by root, Sun Mar 18 03:03:36 2007 UTC vs. Revision 1.25 by elmex, Wed Oct 17 11:51:11 2007 UTC

Diff Legend

Comparing deliantra/Deliantra-Client/pod/command_help.pod (file contents):
Revision 1.14 by root, Sun Mar 18 03:03:36 2007 UTC vs.
Revision 1.25 by elmex, Wed Oct 17 11:51:11 2007 UTC