1 |
GVPE NEWS |
2 |
|
3 |
- INCOMPATIBLE CHANGE: no longer enable udp protocol if no other |
4 |
protocols are enabled - this is necessary when you have nodes with |
5 |
completely unknown protocols, to force mediated connection requests. |
6 |
- INCOMPATIBLE CHANGE: dns transport protocol bumped to version 2. |
7 |
- core protocol version 0.1, compatible with older releases. |
8 |
- fix a bug where nodes would tell the other side that it supports |
9 |
the same protocols as that other side, instead of its own. |
10 |
- add zlib when found, as openssl depends on it in newer versions. |
11 |
- work around append-bugs in uclibc by using an extra seek. |
12 |
- new "include" directive for the config file. |
13 |
- gvpectrl no longer evaluates any "on" directives. |
14 |
- major, but incremental, dns transport improvements: |
15 |
- do not simply abort in some error cases in the dns transport, |
16 |
but try to recover. |
17 |
- allow lowercase/uppercase alises for base-n encodings that do |
18 |
not rely on case. |
19 |
- use base26 instead of base22 encoding for dns syn's, and |
20 |
base36 instead of base22 for headers (saves one byte/packet). |
21 |
- back off far quicker in dns tunnel when idling - increases |
22 |
latency on an idle link somewhat, but avoids hundreds of |
23 |
needless packets. |
24 |
- poll more aggressively when idling in dns (poll once per |
25 |
second as opposed to once per 5 seconds). |
26 |
- upgrade to libev 4 API. |
27 |
|
28 |
2.24 Sat Feb 12 05:15:48 CET 2011 |
29 |
- protocol version 0.1, compatible with older releases. |
30 |
- due to a bug, when packets were lost, a connection could go into a |
31 |
state where a ping/connection request from another node would be |
32 |
ignored, leading to connections not being re-established. |
33 |
- due to a bug, compression was almost always enabled. |
34 |
- enable-max-mtu was actually enable-mtu, contrary to documentation. |
35 |
- add nfmark support. |
36 |
- add node-change script support. |
37 |
- new DESTSI variable for node-xxx scripts. |
38 |
- updated codingstyle a bit, declared truly static stuff as static. |
39 |
- clarify compression docs. |
40 |
|
41 |
2.22 Sun Feb 1 17:25:28 CET 2009 |
42 |
- protocol version 0.1, compatible with older releases. |
43 |
- enabled icmp/tcp/http-proxy protocols by default. |
44 |
- updated copyright in program greetings. |
45 |
- fix some configure messages. |
46 |
- updated to libev 3.52. |
47 |
|
48 |
2.21 Wed Sep 3 06:56:27 CEST 2008 |
49 |
- protocol version 0.1, compatible with older releases. |
50 |
- add missing ev++.h include header to tarball, which everybody |
51 |
who tested it apparently had in their include path :(. Caught |
52 |
by Karl Kleinpaste and Marcus Kong. |
53 |
|
54 |
2.2 Mon Sep 1 06:28:09 CEST 2008 |
55 |
- protocol version 0.1, compatible with older releases. |
56 |
but upgrade is recommended to due changed ondemand behaviour. |
57 |
- new per-node options max-ttl and max-queue. |
58 |
- convert from iom.C to libev, a high-performance event loop |
59 |
(http://software.schmorp.de/pkg/libev). |
60 |
- tcp connections were leaking in some cases. |
61 |
- retry more aggressively (once/s) to establish a connection if |
62 |
new packets arrive for it. |
63 |
- save a lot of setsockopt calls when the tos doesn't change. |
64 |
- honor disabled even on initial connect attempt. |
65 |
- changed callback mechanism to be slightly less portable |
66 |
but more efficient mechanism (standards-compliant c++ compilers |
67 |
should work). |
68 |
- increased receive window positive size, to allow for massive |
69 |
packet loss due to occasional longer drop-outs. |
70 |
- send RST when a positive window size violation is detected, but |
71 |
not in other cases, to reconnect more quickly. |
72 |
- upgraded liblzf to version 3.4. |
73 |
- dropped -fno-exceptions due to ev++.h using it. |
74 |
- node-up/down scripts are now run in sequence. |
75 |
- new -q switch for gvpectrl, for when you run it often. |
76 |
- work around the horribly inconsistent, ad-hoc, ever-changing |
77 |
and broken texinfo syntax. YMMV. avoid texinfo. |
78 |
- keepalive is more aggressive now, sensding ping's every 3 seconds |
79 |
and killing the conenction after 15 seconds. |
80 |
- bugfixes. |
81 |
|
82 |
2.01 Thu Mar 29 19:26:04 CEST 2007 |
83 |
- protocol version 0.1, compatible with older releases. |
84 |
- bugfix of callback.h, might have cause callback return values to |
85 |
be corrupted on architectures like sparc before. |
86 |
- dns transport retries more aggressively. |
87 |
- updated documentation, improved dns transport reliability |
88 |
and throughput. |
89 |
- added experimental support for sha256 and sha512 digests. |
90 |
|
91 |
2.0 Mon Dec 5 13:59:26 CET 2005 |
92 |
- protocol version 0.1, compatible with older releases. |
93 |
- implement allow-direct, deny-direct node config statements. |
94 |
- implemented != for sockinfo. This fixes a bug where |
95 |
gvpe sent packets to the old ip address of another host |
96 |
even though it had received packets from it's new address. |
97 |
This only causes problems if you forget to -HUP your gvpe after |
98 |
your ip address changed, which is *required*. |
99 |
- sets close-on-exec flag on tcp connections. This fixes a bug |
100 |
where child processes kept tcp connections open and caused |
101 |
connections to fail when only one side can connect. |
102 |
- fixed a bug in receive sequence checking that made gvpe |
103 |
accept out-of-window packets in most cases. |
104 |
- tighter limit for the maximum sequence # to avoid overflow |
105 |
conditions + allow more headroom for packet reordering. |
106 |
- replace some asserts that trapped config mismatches by |
107 |
more useful log messages. |
108 |
- fix spurious extra newline in some log messages. |
109 |
|
110 |
1.9 Tue Apr 19 06:21:50 CEST 2005 |
111 |
- protocol version 0.1, compatible with older releases. |
112 |
- WARNING: this version checks the return value of if-up etc. |
113 |
scripts and exits on failure. |
114 |
- IMPORTANT: run if-up/node-up etc. scripts via /bin/sh. |
115 |
- IMPORTANT: interface initialization (MAC, MTU) is now done |
116 |
automatically in most configurations. |
117 |
- options can now be specified on the gvpe command line, too. |
118 |
- make some DNS transport values configurable and document them. |
119 |
- improved OS specific information in gvpe.osdep(5). |
120 |
- new tap device type "native/darwin", that supports the tap |
121 |
driver available for darwin (thanks to matthew mead who tested |
122 |
it out with me in a long session). tincd/darwin is still available. |
123 |
- new device type "tincd/bsd", which is a newer version of the |
124 |
*bsd-drivers taken from tinc. |
125 |
- fixed a bug in relying on the order of global construction |
126 |
when tcp transport was enabled. The fix makes it use no |
127 |
cpu time unless it is in use, too. |
128 |
- information about other nodes is now available to if-up etc. scripts. |
129 |
- the value of the config variable if-up-data is passed to the if-up |
130 |
etc. scripts. |
131 |
- skip unparsable config lines with a warning instead of stopping |
132 |
parsing and continuing with a certainly unusable config. |
133 |
|
134 |
1.8 Fri Mar 18 00:58:55 CET 2005 |
135 |
- protocol version 0.1, compatible with older releases. |
136 |
- enable-udp = yes is now default only when no other protocols |
137 |
are enabled. otherwise it is disabled unless explicitly enabled. |
138 |
- implemented dns tunneling (experimental now and in the future). |
139 |
- remove support for pre-release version protocol. |
140 |
- updated tincd drivers (rev 1433), added uml_socket driver, documented |
141 |
tincd drivers a bit better. |
142 |
- document icmp configuration values. |
143 |
- document transport protocols in gvpe.protocol(7). |
144 |
- remove unused ChangeLog file. |
145 |
- created a mailinglist at gvpe@lists.schmorp.de. |
146 |
- added an exemption to allow distribution of binaries linked against |
147 |
OpenSSL, as suggested by Guus Sliepen (author of tinc). No |
148 |
GNUTLS conversion in sight. |
149 |
- some portability fixes with respect to --disable-nls. |
150 |
|
151 |
1.7 Tue Feb 22 23:58:59 CET 2005 |
152 |
- protocol version 0.1, compatible with older releases. |
153 |
- first gnu release. |
154 |
- documented the special value 1 for router-priority. |
155 |
- renamed vped => gvpe and vpectrl => gvpectrl, as well as |
156 |
vped.conf => gvpe.conf. |
157 |
- new per-node option "max-retry". |
158 |
- asymmetric rekeying behaviour, so hosts don't rekey simultaneously. |
159 |
- new configure option --enable-static-daemon. |
160 |
- fix configure --help output. |
161 |
- many documentation layout fixes. |
162 |
- synced iom.[Ch] from rxvt-unicode. |
163 |
- try to cope with some non-monotonic time changes. |
164 |
- revert to locale.h - a usual, clocale is nonfunctioning on macosx. |
165 |
- considerably improved pod2texi and the resulting texi doc. |
166 |
|
167 |
1.6.1 Wed May 12 14:48:20 CEST 2004 |
168 |
- protocol version 0.1, compatible with older releases. |
169 |
- fix -c switch that has been broken due to a last-minute fix |
170 |
to option and config file parsing. |
171 |
|
172 |
1.6 Mon May 10 20:55:10 CEST 2004 |
173 |
- protocol version 0.1, compatible with older releases. |
174 |
- do not RESET on out-of-sequence packets (good for wireless). |
175 |
- various non-security-related bugfixes. |
176 |
- c++ify (at least make it compile with g++-3.4, which should make |
177 |
it a little bit more standard c++). |
178 |
|
179 |
1.5 Fri Jan 30 00:50:04 CET 2004 |
180 |
- protocol version 0.1, compatible with older releases. |
181 |
- vped will refuse to start when hostkey and public key do not match. |
182 |
- updated lzf code to version 1.2. |
183 |
- better error reporting for "unusual" conditions, like failing |
184 |
to allocate memory, that should not normally happen and |
185 |
will otherwise result in spurious other error messages. Also |
186 |
adds paranoid checks in case openssl's API changes in a bad way. |
187 |
- fix a bug where queued vpn packets were cleared to zero. while |
188 |
this doesn't affect security, it did cause warning messages and |
189 |
unnecessary connectivity delays. |
190 |
|
191 |
1.4 Sat Jan 17 15:49:21 CET 2004 |
192 |
- protocol version 0.1, compatible with older releases. |
193 |
- better retry behaviour on key mismatch. |
194 |
- use select-based io_manager instead of poll-based one. |
195 |
- share io manager between rxvt-unicode and vpe. |
196 |
- sooo many *BSD workarounds because no BSD I could find is even |
197 |
remotely POSIX-compatible. |
198 |
|
199 |
1.2 Fri Oct 17 03:44:44 CEST 2003 |
200 |
- protocol version 0.1. |
201 |
- tincd kernel interface code imported, more supported platforms |
202 |
(native/linux (2.4), tincd/linux (2.2 and 2.4), tincd/freebsd, |
203 |
native/cygwin). |
204 |
- added primitive ethernet emulation (ipv4 only), which allows |
205 |
the following platforms that only have tun drivers to work: |
206 |
/* none yet tested */ |
207 |
- portability workarounds, especially for unfriendly freebsd |
208 |
- very minor bugfixes |
209 |
- warnings when choosing insecure ciphers/hashes |
210 |
- reduced default hmac length to 8. |
211 |
- cvs now contains configure, Makefile.in and other generated files. |
212 |
- added doc/complex-example to the distribution. |
213 |
|
214 |
1.0 distant past |
215 |
- protocol version 0.1. |
216 |
- tweaked various timeouts to help very slow (486) class |
217 |
machines or nets with many hosts. |
218 |
- tweaked rate-limiting to be more forgiving for hosts |
219 |
connecting through routers (not a fix). |
220 |
|