[ViewVC] Diff of: cvs/gvpe/doc/gvpe.conf.5.pod

Comparing gvpe/doc/gvpe.conf.5.pod (file contents):
Revision 1.1 by pcg, Fri Jun 11 15:56:13 2004 UTC vs.
Revision 1.13 by pcg, Sat Mar 26 03:16:23 2005 UTC

…		…
2		2
3	gvpe.conf - configuration file for the GNU VPE daemon	3	gvpe.conf - configuration file for the GNU VPE daemon
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	enable-udp = yes
8	udp-port = 407	7	udp-port = 407
9	mtu = 1492	8	mtu = 1492
10	ifname = vpn0	9	ifname = vpn0
11		10
12	node = branch1	11	node = branch1
…		…
22	=head1 DESCRIPTION	21	=head1 DESCRIPTION
23		22
24	The gvpe config file consists of a series of lines that contain C<variable	23	The gvpe config file consists of a series of lines that contain C<variable
25	= value> pairs. Empty lines are ignored. Comments start with a C<#> and	24	= value> pairs. Empty lines are ignored. Comments start with a C<#> and
26	extend to the end of the line. They can be used on their own lines, or	25	extend to the end of the line. They can be used on their own lines, or
27	after any directives. Spaces are allowed before or after the C<=> sign or	26	after any directives. Whitespace is allowed around the C<=> sign or after
28	after values, but not within the variable names or values themselves.	27	values, but not within the variable names or values themselves.
29		28
30	The only exception to the above is the "on" directive that can prefix any	29	The only exception to the above is the "on" directive that can prefix any
31	C<name = value> setting and will only "execute" it on the named node, or	30	C<name = value> setting and will only "execute" it on the named node, or
32	(if the nodename starts with "!") on all nodes except the named one.	31	(if the nodename starts with "!") on all nodes except the named one.
33		32
…		…
61	values on different nodes using C<on>), but will affect the behaviour of	60	values on different nodes using C<on>), but will affect the behaviour of
62	the gvpe daemon and all connections it creates.	61	the gvpe daemon and all connections it creates.
63		62
64	=over 4	63	=over 4
65		64
66	=item loglevel = noise\|trace\|debug\|info\|notice\|warn\|error\|critical	65	=item dns-forw-host = hostname/ip
67		66
68	Set the logging level. Connection established messages are logged at level	67	The dns server to forward dns requests to for the DNS tunnel protocol
69	C<info>, notable errors are logged with C<error>. Default is C<info>.	68	(default: C<127.0.0.1>, changing it is highly recommended).
70		69
71	=item node = nickname	70	=item dns-forw-port = port-number
72		71
73	Not really a config setting but introduces a node section. The nickname is	72	The port where the C<dns-forw-host> is to be contacted (default: C<53>,
74	used to select the right configuration section and must be passed as an	73	which is fine in most cases).
75	argument to the gvpe daemon.
76		74
77	=item private-key = relative-path-to-key	75	=item dns-max-outstanding = integer-number-of-requests
78		76
79	Sets the path (relative to the config directory) to the private key	77	The maximum number of outstanding DNS transport requests
80	(default: C<hostkey>). This is a printf format string so every C<%> must	78	(default: C<100>). GVPE will never issue more requests then the given
81	be doubled. A single C<%s> is replaced by the hostname, so you could	79	limit without receiving replies. In heavily overloaded situations it might
82	use paths like C<hostkeys/%s> to fetch the files at the location where	80	help to set this to a low number (e.g. C<3> or even C<1>) to limit the
83	C<gvpectrl> puts them.	81	number of parallel requests.
84		82
85	Since only the private key file of the current node is used and the	83	The default should be working ok for most links.
86	private key file should be kept secret per-host to avoid spoofings, it is	84
87	not recommended to use this feature.	85	=item dns-overlap-factor = float
		86
		87	The DNS transport uses the minimum request latency (B<min_latency>) seen
		88	during a connection as it's timing base. This factor (default: C<0.5>,
		89	must be > 0) is multiplied by B<min_latency> to get the maximum sending
		90	rate (= minimum send interval), i.e. a factor of C<1> means that a new
		91	request might be generated every B<min_latency> seconds, which means on
		92	average there should only ever be one outstanding request. A factor of
		93	C<0.5> means that GVPE will send requests twice as often as the minimum
		94	latency measured.
		95
		96	For congested or picky dns forwarders you could use a value nearer to or
		97	exceeding C<1>.
		98
		99	The default should be working ok for most links.
		100
		101	=item dns-send-interval = send-interval-in-seconds
		102
		103	The minimum send interval (= maximum rate) that the DNS transport will
		104	use to send new DNS requests. GVPE will not exceed this rate even when
		105	the latency is very low. The default is C<0.01>, which means GVPE will
		106	not send more than 100 DNS requests per connection per second. For
		107	high-bandwidth links you could go lower, e.g. to C<0.001> or so. For
		108	congested or rate-limited links, you might want to go higher, say C<0.1>,
		109	C<0.2> or even higher.
		110
		111	The default should be working ok for most links.
		112
		113	=item dns-timeout-factor = float
		114
		115	Factor to multiply the C<min_latency> (see C<dns-overlap-factor>) by to
		116	get request timeouts. The default of C<8> means that the DNS transport
		117	will resend the request when no reply has been received for longer than
		118	eight times the minimum (= expected) latency, assuming the request or
		119	reply has been lost.
		120
		121	For congested links a higher value might be necessary (e.g. C<30>). If the
		122	link is very stable lower values (e.g. C<2>) might work nicely. Values
		123	near or below C<1> makes no sense whatsoever.
		124
		125	The default should be working ok for most links.
		126
		127	=item if-up = relative-or-absolute-path
		128
		129	Sets the path of a script that should be called immediately after the
		130	network interface is initialized (but not neccessarily up). The following
		131	environment variables are passed to it (the values are just examples).
		132
		133	Variables that have the same value on all nodes:
		134
		135	=over 4
		136
		137	=item CONFBASE=/etc/gvpe
		138
		139	The configuration base directory.
		140
		141	=item IFNAME=vpn0
		142
		143	The network interface to initialize.
		144
		145	=item IFTYPE=native # or tincd
		146
		147	=item IFSUBTYPE=linux # or freebsd, darwin etc..
		148
		149	The interface type (C<native> or C<tincd>) and the subtype (usually the
		150	OS name in lowercase) that this GVPE was configured for. Can be used to
		151	select the correct syntax to use for network-related commands.
		152
		153	=item MTU=1436
		154
		155	The MTU to set the interface to. You can use lower values (if done
		156	consistently on all hosts), but this is usually ineffective.
		157
		158	=item NODES=5
		159
		160	The number of nodes in this GVPE network.
		161
		162	=back
		163
		164	Variables that are node-specific and with values pertaining to the node
		165	running this GVPE:
		166
		167	=over 4
		168
		169	=item IFUPDATA=string
		170
		171	The value of the configuration directive C<if-up-data>.
		172
		173	=item MAC=fe:fd:80:00:00:01
		174
		175	The MAC address the network interface has to use.
		176
		177	Might be used to initialize interfaces on platforms where GVPE does not
		178	do this automatically. Please see the C<gvpe.osdep(5)> manpage for
		179	platform-specific information.
		180
		181	=item NODENAME=branch1
		182
		183	The nickname of the node.
		184
		185	=item NODEID=1
		186
		187	The numerical node ID of the node running this instance of GVPE. The first
		188	node mentioned in the config file gets ID 1, the second ID 2 and so on.
		189
		190	=back
		191
		192	In addition, all node-specific variables (except C<NODEID>) will be
		193	available with a postfix of C<_nodeid>, which contains the value for that
		194	node, e.g. the C<MAC_1> variable contains the MAC address of node #1, while
		195	the C<NODENAME_22> variable contains the name of node #22.
		196
		197	Here is a simple if-up script:
		198
		199	#!/bin/sh
		200	ip link set $IFNAME up
		201	[ $NODENAME = branch1 ] && ip addr add 10.0.0.1 dev $IFNAME
		202	[ $NODENAME = branch2 ] && ip addr add 10.1.0.1 dev $IFNAME
		203	ip route add 10.0.0.0/8 dev $IFNAME
		204
		205	More complicated examples (using routing to reduce arp traffic) can be
		206	found in the etc/ subdirectory of the distribution.
		207
		208	=item ifname = devname
		209
		210	Sets the tun interface name to the given name. The default is OS-specific
		211	and most probably something like C<tun0>.
88		212
89	=item ifpersist = yes\|true\|on \| no\|false\|off	213	=item ifpersist = yes\|true\|on \| no\|false\|off
90		214
91	Should the tun/tap device be made persistent, that is, should the device	215	Should the tun/tap device be made persistent, that is, should the device
92	stay up even when gvpe exits? Some versions of the tunnel device have	216	stay up even when gvpe exits? Some versions of the tunnel device have
93	problems sending packets when gvpe is restarted in persistent mode, so	217	problems sending packets when gvpe is restarted in persistent mode, so
94	if the connections can be established but you cannot send packets from	218	if the connections can be established but you cannot send packets from
95	the local node, try to set this to C<off> and do an ifconfig down on the	219	the local node, try to set this to C<off> and do an ifconfig down on the
96	device.	220	device.
97		221
98	=item ifname = devname	222	=item ip-proto = numerical-ip-protocol
99		223
100	Sets the tun interface name to the given name. The default is OS-specific	224	Sets the protocol number to be used for the rawip protocol. This is a
101	and most probably something like C<tun0>.	225	global option because all hosts must use the same protocol, and since
		226	there are no port numbers, you cannot easily run more than one gvpe
		227	instance using the same protocol, nor can you share the protocol with
		228	other programs.
102		229
103	=item rekey = seconds	230	The default is 47 (GRE), which has a good chance of tunneling through
		231	firewalls (but note that the rawip protocol is not GRE compatible). Other
		232	common choices are 50 (IPSEC, ESP), 51 (IPSEC, AH), 4 (IPIP tunnels) or 98
		233	(ENCAP, rfc1241)
104		234
105	Sets the rekeying interval in seconds (default: C<3600>). Connections are	235	=item http-proxy-host = hostname/ip
106	reestablished every C<rekey> seconds.	236
		237	The C<http-proxy-*> family of options are only available if gvpe was
		238	compiled with the C<--enable-http-proxy> option and enable tunneling of
		239	tcp connections through a http proxy server.
		240
		241	C<http-proxy-host> and C<http-proxy-port> should specify the hostname and
		242	port number of the proxy server. See C<http-proxy-loginpw> if your proxy
		243	requires authentication.
		244
		245	Please note that gvpe will still try to resolve all hostnames in the
		246	configuration file, so if you are behind a proxy without access to a dns
		247	server better use numerical IP addresses.
		248
		249	To make best use of this option disable all protocols except tcp in your
		250	config file and make sure your routers (or all other hosts) are listening
		251	on a port that the proxy allows (443, https, is a common choice).
		252
		253	If you have a router, connecting to it will suffice. Otherwise tcp must be
		254	enabled on all hosts.
		255
		256	Example:
		257
		258	http-proxy-host = proxy.example.com
		259	http-proxy-port = 3128 # 8080 is another common choice
		260	http-proxy-auth = schmorp:grumbeere
		261
		262	=item http-proxy-port = proxy-tcp-port
		263
		264	The port where your proxy server listens.
		265
		266	=item http-proxy-auth = login:password
		267
		268	The optional login and password used to authenticate to the proxy server,
		269	seperated by a literal colon (C<:>). Only basic authentication is
		270	currently supported.
107		271
108	=item keepalive = seconds	272	=item keepalive = seconds
109		273
110	Sets the keepalive probe interval in seconds (default: C<60>). After this	274	Sets the keepalive probe interval in seconds (default: C<60>). After this
111	many seconds of inactivity the daemon will start to send keepalive probe	275	many seconds of inactivity the daemon will start to send keepalive probe
112	every 5 seconds until it receives a reply from the other end. If no reply	276	every 5 seconds until it receives a reply from the other end. If no reply
113	is received within 30 seconds, the peer is considered unreachable and the	277	is received within 30 seconds, the peer is considered unreachable and the
114	connection is closed.	278	connection is closed.
115		279
		280	=item loglevel = noise\|trace\|debug\|info\|notice\|warn\|error\|critical
		281
		282	Set the logging level. Connection established messages are logged at level
		283	C<info>, notable errors are logged with C<error>. Default is C<info>.
		284
116	=item mtu = bytes	285	=item mtu = bytes
117		286
118	Sets the maximum MTU that should be used on outgoing packets (basically	287	Sets the maximum MTU that should be used on outgoing packets (basically
119	the MTU of the outgoing interface) The daemon will automatically calculate	288	the MTU of the outgoing interface) The daemon will automatically calculate
120	maximum overhead (e.g. udp header size, encryption blocksize...) and pass	289	maximum overhead (e.g. udp header size, encryption blocksize...) and pass
…		…
122		291
123	Recommended values are 1500 (ethernet), 1492 (pppoe), 1472 (pptp).	292	Recommended values are 1500 (ethernet), 1492 (pppoe), 1472 (pptp).
124		293
125	This value must be the minimum of the mtu values of all hosts.	294	This value must be the minimum of the mtu values of all hosts.
126		295
127	=item ip-proto = numerical-ip-protocol	296	=item node = nickname
128		297
129	Sets the protocol number to be used for the rawip protocol. This is a	298	Not really a config setting but introduces a node section. The nickname is
130	global option because all hosts must use the same protocol, and since	299	used to select the right configuration section and must be passed as an
131	there are no port numbers, you cannot easily run more than one gvpe	300	argument to the gvpe daemon.
132	instance using the same protocol, nor can you share the protocol with
133	other programs.
134
135	The default is 47 (GRE), which has a good chance of tunneling through
136	firewalls (but note that the rawip protocol is not GRE compatible). Other
137	common choices are 50 (IPSEC, ESP), 51 (IPSEC, AH), 4 (IPIP tunnels) or 98
138	(ENCAP, rfc1241)
139
140	=item if-up = relative-or-absolute-path
141
142	Sets the path of a script that should be called immediately after the
143	network interface is initialized (but not neccessarily up). The following
144	environment variables are passed to it (the values are just examples):
145
146	=over 4
147
148	=item CONFBASE=/etc/gvpe
149
150	The configuration base directory.
151
152	=item IFNAME=vpn0
153
154	The interface to initialize.
155
156	=item MTU=1436
157
158	The MTU to set the interface to. You can use lower values (if done
159	consistently on all hosts), but this is usually ineffective.
160
161	=item MAC=fe:fd:80:00:00:01
162
163	The MAC address to set the interface to. The script must set the
164	interface MAC to this value. You will most likely use one of these:
165
166	ip link set $IFNAME address $MAC mtu $MTU up # GNU/Linux
167	ifconfig $IFNAME ether $MAC mtu $MTU up # FreeBSD
168
169	Please see the C<gvpe.osdep(5)> manpage for platform-specific information.
170
171	=item IFTYPE=native # or tincd
172
173	=item IFSUBTYPE=linux # or freebsd, darwin etc..
174
175	The interface type (C<native> or C<tincd>) and the subtype (usually the os
176	name in lowercase) that this gvpe was configured for. Can be used to select
177	the correct syntax to use for network-related commands.
178
179	=item NODENAME=branch1
180
181	The nickname of the current node, as passed to the gvpe daemon.
182
183	=item NODEID=1
184
185	The numerical node id of the current node. The first node mentioned in the
186	config file gets ID 1, the second ID 2 and so on.
187
188	=back
189
190	Here is a simple if-up script:
191
192	#!/bin/sh
193	ip link set $IFNAME address $MAC mtu $MTU up
194	[ $NODENAME = branch1 ] && ip addr add 10.0.0.1 dev $IFNAME
195	[ $NODENAME = branch2 ] && ip addr add 10.1.0.1 dev $IFNAME
196	ip route add 10.0.0.0/8 dev $IFNAME
197
198	More complicated examples (using routing to reduce arp traffic) can be
199	found in the etc/ subdirectory of the distribution.
200		301
201	=item node-up = relative-or-absolute-path	302	=item node-up = relative-or-absolute-path
202		303
203	Sets a command (default: no script) that should be called whenever a	304	Sets a command (default: no script) that should be called whenever a
204	connection is established (even on rekeying operations). In addition	305	connection is established (even on rekeying operations). In addition to
205	to the variables passed to C<if-up> scripts, the following environment	306	all the variables passed to C<if-up> scripts, the following environment
206	variables will be set:	307	variables will be set:
207		308
208	=over 4	309	=over 4
209		310
210	=item DESTNODE=branch2	311	=item DESTNODE=branch2
…		…
243		344
244	=item node-down = relative-or-absolute-path	345	=item node-down = relative-or-absolute-path
245		346
246	Same as C<node-up>, but gets called whenever a connection is lost.	347	Same as C<node-up>, but gets called whenever a connection is lost.
247		348
248	=item http-proxy-host = hostname/ip
249
250	The C<http-proxy-*> family of options are only available if gvpe was
251	compiled with the C<--enable-http-proxy> option and enable tunneling of
252	tcp connections through a http proxy server.
253
254	C<http-proxy-host> and C<http-proxy-port> should specify the hostname and
255	port number of the proxy server. See C<http-proxy-loginpw> if your proxy
256	requires authentication.
257
258	Please note that gvpe will still try to resolve all hostnames in the
259	configuration file, so if you are behind a proxy without access to a dns
260	server better use numerical IP addresses.
261
262	To make best use of this option disable all protocols except tcp in your
263	config file and make sure your routers (or all other hosts) are listening
264	on a port that the proxy allows (443, https, is a common choice).
265
266	If you have a router, connecting to it will suffice. Otherwise tcp must be
267	enabled on all hosts.
268
269	Example:
270
271	http-proxy-host = proxy.example.com
272	http-proxy-port = 3128 # 8080 is another common choice
273	http-proxy-auth = schmorp:grumbeere
274
275	=item http-proxy-port = proxy-tcp-port
276
277	The port where your proxy server listens.
278
279	=item http-proxy-auth = login:password
280
281	The optional login and password used to authenticate to the proxy server,
282	seperated by a literal colon (C<:>). Only basic authentication is
283	currently supported.
284
285	=item pid-file = path	349	=item pid-file = path
286		350
287	The path to the pid file to check and create (Default:	351	The path to the pid file to check and create
		352	(default: C<LOCALSTATEDIR/run/gvpe.pid>).
		353
		354	=item private-key = relative-path-to-key
		355
		356	Sets the path (relative to the config directory) to the private key
		357	(default: C<hostkey>). This is a printf format string so every C<%> must
		358	be doubled. A single C<%s> is replaced by the hostname, so you could
		359	use paths like C<hostkeys/%s> to fetch the files at the location where
		360	C<gvpectrl> puts them.
		361
		362	Since only the private key file of the current node is used and the
		363	private key file should be kept secret per-host to avoid spoofings, it is
		364	not recommended to use this feature.
		365
		366	=item rekey = seconds
		367
		368	Sets the rekeying interval in seconds (default: C<3600>). Connections are
		369	reestablished every C<rekey> seconds.
288		370
289	=back	371	=back
290		372
291	=head2 NODE SPECIFIC SETTINGS	373	=head2 NODE SPECIFIC SETTINGS
292		374
…		…
295	executed before the first node section set the defaults, settings that are	377	executed before the first node section set the defaults, settings that are
296	executed within a node section only apply to the given node.	378	executed within a node section only apply to the given node.
297		379
298	=over 4	380	=over 4
299		381
300	=item udp-port = port-number
301
302	Sets the port number used by the UDP protocol (default: C<655>, not
303	officially assigned by IANA!).
304
305	=item tcp-port = port-number
306
307	Similar to C<udp-port> (default: C<655>), but sets the TCP port number.
308
309	=item enable-rawip = yes\|true\|on \| no\|false\|off
310
311	Enable the RAW IPv4 transport using the C<ip-proto> protocol
312	(default: C<no>). This is the best choice, since the overhead per packet
313	is only 38 bytes, as opposed to UDP's 58 (or TCP's 60+).
314
315	=item enable-udp = yes\|true\|on \| no\|false\|off	382	=item compress = yes\|true\|on \| no\|false\|off
316		383
317	Enable the UDPv4 transport using the C<udp-port> port (default: C<yes>,	384	Wether to compress data packets sent to this host (default: C<yes>).
318	but this will change!). This is a good general choice since UDP tunnels	385	Compression is really cheap even on slow computers and has no size
319	well through many firewalls.	386	overhead at all, so enabling this is a good idea.
320		387
321	NOTE: Please specify C<enable-udp = yes> even though it is the default, as
322	some future version will have all protocols disabled by default.
323
324	=item enable-tcp = yes\|true\|on \| no\|false\|off
325
326	Enable the TCPv4 transport using the C<tcp-port> port
327	(default: C<no>). Support for this horribly unsuitable protocol is only
328	available when gvpe was compiled using the C<--enable-tcp> option. Never
329	use this transport unless you really must, it is horribly ineffiecent and
330	resource-intensive compared to the other transports.
331
332	=item router-priority = positive-number
333
334	Sets the router priority of the given host (default: C<0>, disabled). If
335	some host tries to connect to another host without a hostname, it asks
336	the router host for it's IP address. The router host is the one with the
337	highest priority that is currently reachable. Make sure all clients always
338	connect to the router hosts, otherwise conencting to them is impossible.
339
340	=item connect = ondemand\|never\|always\|disabled	388	=item connect = ondemand \| never \| always \| disabled
341		389
342	Sets the connect mode (default: C<always>). It can be C<always> (always	390	Sets the connect mode (default: C<always>). It can be C<always> (always
343	try to establish and keep a conenction to the given host), C<never>	391	try to establish and keep a connection to the given host), C<never>
344	(nevr initiate a connection to the given host, but accept connections),	392	(never initiate a connection to the given host, but accept connections),
345	C<ondemand> (try to establish a connection on the first packet sent, and	393	C<ondemand> (try to establish a connection on the first packet sent, and
346	take it down after the keepalive interval) or C<disabled> (node is bad,	394	take it down after the keepalive interval) or C<disabled> (node is bad,
347	don't talk to it).	395	don't talk to it).
		396
		397	=item dns-domain = domain-suffix
		398
		399	The DNS domain suffix that points to the DNS tunnel server for this node.
		400
		401	The domain must point to a NS record that points to the I<dns-hostname>,
		402	i.e.
		403
		404	dns-domainname = tunnel.example.net
		405	dns-hostname = tunnel-server.example.net
		406
		407	Corresponds to the following DNS entries in the C<example.net> domain:
		408
		409	tunnel.example.net. NS tunnel-server.example.net.
		410	tunnel-server.example.net. A 13.13.13.13
		411
		412	=item dns-hostname = hostname/ip
		413
		414	The address to bind the DNS tunnel socket to, similar to the C<hostname>,
		415	but for the DNS tunnel protocol only. Default: C<0.0.0.0>, but that might
		416	change.
		417
		418	=item dns-port = port-number
		419
		420	The port to bind the DNS tunnel socket to. Must be C<53> on DNS tunnel servers.
		421
		422	=item enable-dns = yes\|true\|on \| no\|false\|off
		423
		424	See gvpe.protocol(7) for a description of the DNS transport
		425	protocol. Avoid this protocol if you can.
		426
		427	Enable the DNS tunneling protocol on this node, either as server or as
		428	client. Support for this transport protocol is only available when gvpe
		429	was compiled using the C<--enable-dns> option.
		430
		431	=item enable-icmp = yes\|true\|on \| no\|false\|off
		432
		433	See gvpe.protocol(7) for a description of the ICMP transport protocol.
		434
		435	Enable the ICMP transport using icmp packets of type C<icmp-type> on this
		436	node.
		437
		438	=item enable-rawip = yes\|true\|on \| no\|false\|off
		439
		440	See gvpe.protocol(7) for a description of the RAW IP transport protocol.
		441
		442	Enable the RAW IPv4 transport using the C<ip-proto> protocol
		443	(default: C<no>).
		444
		445	=item enable-tcp = yes\|true\|on \| no\|false\|off
		446
		447	See gvpe.protocol(7) for a description of the TCP transport protocol.
		448
		449	Enable the TCPv4 transport using the C<tcp-port> port
		450	(default: C<no>). Support for this transport protocol is only available
		451	when gvpe was compiled using the C<--enable-tcp> option.
		452
		453	=item enable-udp = yes\|true\|on \| no\|false\|off
		454
		455	See gvpe.protocol(7) for a description of the UDP transport protocol.
		456
		457	Enable the UDPv4 transport using the C<udp-port> port (default: C<no>,
		458	unless no other protocol is enabled for a node, in which case this
		459	protocol is enabled automatically).
		460
		461	NOTE: Please specify C<enable-udp = yes> if you want t use it even though
		462	it might get switched on automatically, as some future version might
		463	default to another default protocol.
		464
		465	=item icmp-type = integer
		466
		467	Sets the type value to be used for outgoing (and incoming) packets sent
		468	via the ICMP transport.
		469
		470	The default is C<0> (which is C<echo-reply>, also known as
		471	"ping-replies"). Other useful values include C<8> (C<echo-request>, a.k.a.
		472	"ping") and C<11> (C<time-exceeded>), but any 8-bit value can be used.
		473
		474	=item if-up-data = value
		475
		476	The value specified using this directive will be passed to the C<if-up>
		477	script in the environment variable C<IFUPDATA>.
348		478
349	=item inherit-tos = yes\|true\|on \| no\|false\|off	479	=item inherit-tos = yes\|true\|on \| no\|false\|off
350		480
351	Wether to inherit the TOS settings of packets sent to the tunnel when	481	Wether to inherit the TOS settings of packets sent to the tunnel when
352	sending packets to this node (default: C<yes>). If set to C<yes> then	482	sending packets to this node (default: C<yes>). If set to C<yes> then
353	outgoing tunnel packets will have the same TOS setting as the packets sent	483	outgoing tunnel packets will have the same TOS setting as the packets sent
354	to the tunnel device, which is usually what you want.	484	to the tunnel device, which is usually what you want.
355		485
356	=item compress = yes\|true\|on \| no\|false\|off
357
358	Wether to compress data packets sent to this host (default: C<yes>).
359	Compression is really cheap even on slow computers and has no size
360	overhead at all, so enabling this is a good idea.
361
362	=item max-retry = positive-number	486	=item max-retry = positive-number
363		487
364	The maximum interval in seconds (default: C<28800>, 8 hours) between	488	The maximum interval in seconds (default: C<3600>, one hour) between
365	retries to establish a connection to this node. When a connection cannot	489	retries to establish a connection to this node. When a connection cannot
366	be established, gvpe uses exponential backoff capped at this value. It's	490	be established, gvpe uses exponential backoff capped at this value. It's
367	sometimes useful to set this to a much lower value (e.g. C<120>) on	491	sometimes useful to set this to a much lower value (e.g. C<120>) on
368	connections to routers that usually are stable but sometimes are down, to	492	connections to routers that usually are stable but sometimes are down, to
369	assure quick reconnections.	493	assure quick reconnections even after longer downtimes.
		494
		495	=item router-priority = 0 \| 1 \| positive-number>=2
		496
		497	Sets the router priority of the given host (default: C<0>, disabled). If
		498	some host tries to connect to another host without a hostname, it asks
		499	the router host for it's IP address. The router host is the one with the
		500	highest priority larger than C<1> that is currently reachable.
		501
		502	Make sure all hosts always connect (C<connect = always>) to the router
		503	hosts, otherwise connecting to them might be impossible.
		504
		505	The special value C<1> allows other hosts to route through the router
		506	host, but they will never route through it by default. The value C<0>
		507	disables routing. The idea behind this is that some hosts can, if
		508	required, bump the C<router-priority> setting to higher than C<1> in their
		509	local config to route through specific hosts. If C<router-priority> is
		510	C<0>, then routing will be refused, so C<1> serves as a "enable, but do
		511	not use by default" switch.
		512
		513	=item tcp-port = port-number
		514
		515	Similar to C<udp-port> (default: C<655>), but sets the TCP port number.
		516
		517	=item udp-port = port-number
		518
		519	Sets the port number used by the UDP protocol (default: C<655>, not
		520	officially assigned by IANA!).
370		521
371	=back	522	=back
372		523
373	=head1 CONFIG DIRECTORY LAYOUT	524	=head1 CONFIG DIRECTORY LAYOUT
374		525
375	The default (or recommended) directory layout for the config directory is:	526	The default (or recommended) directory layout for the config directory is:
376		527
377	=over 4	528	=over 4
378		529
379	=item gvpe.conf	530	=item X<gvpe.conf>
380		531
381	The config file.	532	The config file.
382		533
383	=item if-up	534	=item X<if-up>
384		535
385	The if-up script	536	The if-up script
386		537
387	=item node-up, node-down	538	=item X<node-up>, X<node-down>
388		539
389	If used the node up or node-down scripts.	540	If used the node up or node-down scripts.
390		541
391	=item hostkey	542	=item X<hostkey>
392		543
393	The private key (taken from C<hostkeys/nodename>) of the current host.	544	The private key (taken from C<hostkeys/nodename>) of the current host.
394		545
395	=item pubkey/nodename	546	=item X<pubkey/nodename>
396		547
397	The public keys of the other nodes, one file per node.	548	The public keys of the other nodes, one file per node.
398		549
399	=back	550	=back
400		551

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing gvpe/doc/gvpe.conf.5.pod (file contents): Revision 1.1 by pcg, Fri Jun 11 15:56:13 2004 UTC vs. Revision 1.13 by pcg, Sat Mar 26 03:16:23 2005 UTC

Diff Legend

Comparing gvpe/doc/gvpe.conf.5.pod (file contents):
Revision 1.1 by pcg, Fri Jun 11 15:56:13 2004 UTC vs.
Revision 1.13 by pcg, Sat Mar 26 03:16:23 2005 UTC