gvpe/src/conf.h

/*
    conf.h -- configuration database
    Copyright (C) 2003-2008 Marc Lehmann <gvpe@schmorp.de>
 
    This file is part of GVPE.

    GVPE is free software; you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by the
    Free Software Foundation; either version 3 of the License, or (at your
    option) any later version.
   
    This program is distributed in the hope that it will be useful, but
    WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
    Public License for more details.
   
    You should have received a copy of the GNU General Public License along
    with this program; if not, see <http://www.gnu.org/licenses/>.
   
    Additional permission under GNU GPL version 3 section 7
   
    If you modify this Program, or any covered work, by linking or
    combining it with the OpenSSL project's OpenSSL library (or a modified
    version of that library), containing parts covered by the terms of the
    OpenSSL or SSLeay licenses, the licensors of this Program grant you
    additional permission to convey the resulting work.  Corresponding
    Source for a non-source form of such a combination shall include the
    source code for the parts of OpenSSL used as well as that of the
    covered work.
*/

#ifndef GVPE_CONF_H__
#define GVPE_CONF_H__

#include <vector>

#include <openssl/rsa.h>

#include "slog.h"
#include "global.h"

#define DEFAULT_REKEY                   3607    // interval between rekeys
#define DEFAULT_RESEED                  3613    // interval between rng reseeds
#define DEFAULT_KEEPALIVE               60      // one keepalive/minute (it's just 8 bytes...)
#define DEFAULT_UDPPORT                 655     // same as tinc, conflicts would be rare
#define DEFAULT_MTU                     1500    // let's ether-net
#define DEFAULT_MAX_RETRY               3600    // retry at least this often
#define DEFAULT_MAX_TTL                 60      // packets expire after this many seconds
#define DEFAULT_MAX_QUEUE               512     // never queue more than this many packets
 
#define DEFAULT_DNS_TIMEOUT_FACTOR      8.F     // initial retry timeout multiple
#define DEFAULT_DNS_SEND_INTERVAL       .01F    // minimum send interval
#define DEFAULT_DNS_OVERLAP_FACTOR      .5F     // RTT * LATENCY_FACTOR == sending rate
#define DEFAULT_DNS_MAX_OUTSTANDING     100     // max. number of outstanding requests

enum
{
  PROT_UDPv4  = 0x01, // udp over ipv4
  PROT_IPv4   = 0x02, // generic ip protocol
  PROT_TCPv4  = 0x04, // tcp over ipv4 (server)
  PROT_ICMPv4 = 0x08, // icmp over ipv4
  PROT_DNSv4  = 0x10, // dns tunnel ipv4 (server)
  PROT_ALL    = 0x1f
};

#define PROT_RELIABLE (PROT_TCPv4 | PROT_DNSv4)
#define PROT_SLOW     PROT_DNSv4

// select the "best" protocol of the available ones
u8 best_protocol (u8 protset);
const char *strprotocol (u8 protocol);

struct conf_node
{
  int id;         // the id of this node, a 12-bit-number

  RSA *rsa_key;   // his public key
  char *nodename; // nodename, an internal nickname.
  char *hostname; // hostname, if known, or NULL.
  char *if_up_data;
#if ENABLE_DNS
  char *domain;   // dns tunnel domain
#endif
  char *dns_hostname;
  u16 dns_port;

  u8 protocols;   // protocols this host can send & receive
  u16 udp_port, tcp_port;   // the port to bind to
  int max_retry;
  double max_ttl;   // packets expire after this many seconds
  int max_queue;    // maixmum send queue length

  enum connectmode { C_ONDEMAND, C_NEVER, C_ALWAYS, C_DISABLED } connectmode;
  bool compress;
  bool inherit_tos; // inherit TOS in packets send to this destination
  bool low_power; // node is a low-power node (reduce cpu usage, wakeups and assume higher latency)

  vector<const char *> allow_direct;
  vector<const char *> deny_direct;

  u32 routerprio;

  u8 connectable_protocols () const
  {
    u8 protocols = this->protocols;

    // mask out endpoints we can't connect to
    if (!udp_port) protocols &= ~PROT_UDPv4;
    if (!tcp_port) protocols &= ~PROT_TCPv4;
    if (!dns_port) protocols &= ~PROT_DNSv4;

    return protocols;
  }

  bool may_direct (struct conf_node *other);
  void finalise ();

  void print ();

  ~conf_node ();
};

struct configuration
{
  typedef vector<conf_node *> node_vector;
  node_vector nodes;
  conf_node default_node;
  conf_node *thisnode;
  char serial[SERIAL_SIZE];
  char *seed_dev;   // the randomd evice to use for seeding
  double reseed;    // the interval between additional seeds
  int mtu;          // the mtu used for outgoing tunnel packets
  int nfmark;       // the SO_MARK // netfilter mark // fwmark
  double rekey;     // rekey interval
  double keepalive; // keepalive probes interval
  char *ifname;     // the interface name (tap0 ...)
  bool ifpersist;   // should the interface be persistent
  char *prikeyfile;
  RSA *rsa_key;     // our private rsa key
  loglevel llevel;
  u8 ip_proto;      // the ip protocol to use
  uid_t change_uid; // the uid of the user to switch to, or 0
  gid_t change_gid; // the gid of the user to switch to, or 0
  char *change_root;// the path to chroot to, "/" == anonymous
#if ENABLE_ICMP
  u8 icmp_type;     // the icmp type for the icmp-protocol
#endif

  char *script_if_up;
  char *script_node_up;
  char *script_node_change;
  char *script_node_down;
  char *pidfilename;

#if ENABLE_HTTP_PROXY
  char *proxy_auth;     // login:password
  char *proxy_host;     // the proxy hostname, e.g. proxy1.example.net
  u16 proxy_port;       // the proxy port, e.g. 3128
#endif

#if ENABLE_DNS
  char *dns_forw_host;
  bool dns_case_preserving;
  u16 dns_forw_port;
  float dns_timeout_factor;
  float dns_send_interval;
  float dns_overlap_factor;
  int dns_max_outstanding;
#endif

  void init ();
  void cleanup ();
  void clear ();

  conf_node *find_node (const char *name);

  // create a filename from string, replacing %s by the nodename
  // and using relative paths under confbase.
  char *config_filename (const char *name, const char *dflt = 0);

  void print ();

  configuration ();
  ~configuration ();
};

struct configuration_parser
{
  configuration &conf;

  bool need_keys;
  conf_node *node;

  int argc;
  char **argv;

  configuration_parser (configuration &conf, bool need_keys, int argc, char **argv);

  void parse_file (const char *fname);
  const char *parse_line (char *line);
  void parse_argv ();
};

extern struct configuration conf;

#define THISNODE ::conf.thisnode

#endif

Revision:	1.46
Committed:	Fri Oct 11 07:56:07 2013 UTC (10 years, 7 months ago) by root
Content type:	text/plain
Branch:	MAIN
Changes since 1.45:	+1 -0 lines
Log Message:	* empty log message *
#	Content
1	/*
2	conf.h -- configuration database
3	Copyright (C) 2003-2008 Marc Lehmann <gvpe@schmorp.de>
4
5	This file is part of GVPE.
6
7	GVPE is free software; you can redistribute it and/or modify it
8	under the terms of the GNU General Public License as published by the
9	Free Software Foundation; either version 3 of the License, or (at your
10	option) any later version.
11
12	This program is distributed in the hope that it will be useful, but
13	WITHOUT ANY WARRANTY; without even the implied warranty of
14	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
15	Public License for more details.
16
17	You should have received a copy of the GNU General Public License along
18	with this program; if not, see <http://www.gnu.org/licenses/>.
19
20	Additional permission under GNU GPL version 3 section 7
21
22	If you modify this Program, or any covered work, by linking or
23	combining it with the OpenSSL project's OpenSSL library (or a modified
24	version of that library), containing parts covered by the terms of the
25	OpenSSL or SSLeay licenses, the licensors of this Program grant you
26	additional permission to convey the resulting work. Corresponding
27	Source for a non-source form of such a combination shall include the
28	source code for the parts of OpenSSL used as well as that of the
29	covered work.
30	*/
31
32	#ifndef GVPE_CONF_H__
33	#define GVPE_CONF_H__
34
35	#include <vector>
36
37	#include <openssl/rsa.h>
38
39	#include "slog.h"
40	#include "global.h"
41
42	#define DEFAULT_REKEY 3607 // interval between rekeys
43	#define DEFAULT_RESEED 3613 // interval between rng reseeds
44	#define DEFAULT_KEEPALIVE 60 // one keepalive/minute (it's just 8 bytes...)
45	#define DEFAULT_UDPPORT 655 // same as tinc, conflicts would be rare
46	#define DEFAULT_MTU 1500 // let's ether-net
47	#define DEFAULT_MAX_RETRY 3600 // retry at least this often
48	#define DEFAULT_MAX_TTL 60 // packets expire after this many seconds
49	#define DEFAULT_MAX_QUEUE 512 // never queue more than this many packets
50
51	#define DEFAULT_DNS_TIMEOUT_FACTOR 8.F // initial retry timeout multiple
52	#define DEFAULT_DNS_SEND_INTERVAL .01F // minimum send interval
53	#define DEFAULT_DNS_OVERLAP_FACTOR .5F // RTT * LATENCY_FACTOR == sending rate
54	#define DEFAULT_DNS_MAX_OUTSTANDING 100 // max. number of outstanding requests
55
56	enum
57	{
58	PROT_UDPv4 = 0x01, // udp over ipv4
59	PROT_IPv4 = 0x02, // generic ip protocol
60	PROT_TCPv4 = 0x04, // tcp over ipv4 (server)
61	PROT_ICMPv4 = 0x08, // icmp over ipv4
62	PROT_DNSv4 = 0x10, // dns tunnel ipv4 (server)
63	PROT_ALL = 0x1f
64	};
65
66	#define PROT_RELIABLE (PROT_TCPv4 \| PROT_DNSv4)
67	#define PROT_SLOW PROT_DNSv4
68
69	// select the "best" protocol of the available ones
70	u8 best_protocol (u8 protset);
71	const char *strprotocol (u8 protocol);
72
73	struct conf_node
74	{
75	int id; // the id of this node, a 12-bit-number
76
77	RSA *rsa_key; // his public key
78	char *nodename; // nodename, an internal nickname.
79	char *hostname; // hostname, if known, or NULL.
80	char *if_up_data;
81	#if ENABLE_DNS
82	char *domain; // dns tunnel domain
83	#endif
84	char *dns_hostname;
85	u16 dns_port;
86
87	u8 protocols; // protocols this host can send & receive
88	u16 udp_port, tcp_port; // the port to bind to
89	int max_retry;
90	double max_ttl; // packets expire after this many seconds
91	int max_queue; // maixmum send queue length
92
93	enum connectmode { C_ONDEMAND, C_NEVER, C_ALWAYS, C_DISABLED } connectmode;
94	bool compress;
95	bool inherit_tos; // inherit TOS in packets send to this destination
96	bool low_power; // node is a low-power node (reduce cpu usage, wakeups and assume higher latency)
97
98	vector<const char *> allow_direct;
99	vector<const char *> deny_direct;
100
101	u32 routerprio;
102
103	u8 connectable_protocols () const
104	{
105	u8 protocols = this->protocols;
106
107	// mask out endpoints we can't connect to
108	if (!udp_port) protocols &= ~PROT_UDPv4;
109	if (!tcp_port) protocols &= ~PROT_TCPv4;
110	if (!dns_port) protocols &= ~PROT_DNSv4;
111
112	return protocols;
113	}
114
115	bool may_direct (struct conf_node *other);
116	void finalise ();
117
118	void print ();
119
120	~conf_node ();
121	};
122
123	struct configuration
124	{
125	typedef vector<conf_node *> node_vector;
126	node_vector nodes;
127	conf_node default_node;
128	conf_node *thisnode;
129	char serial[SERIAL_SIZE];
130	char *seed_dev; // the randomd evice to use for seeding
131	double reseed; // the interval between additional seeds
132	int mtu; // the mtu used for outgoing tunnel packets
133	int nfmark; // the SO_MARK // netfilter mark // fwmark
134	double rekey; // rekey interval
135	double keepalive; // keepalive probes interval
136	char *ifname; // the interface name (tap0 ...)
137	bool ifpersist; // should the interface be persistent
138	char *prikeyfile;
139	RSA *rsa_key; // our private rsa key
140	loglevel llevel;
141	u8 ip_proto; // the ip protocol to use
142	uid_t change_uid; // the uid of the user to switch to, or 0
143	gid_t change_gid; // the gid of the user to switch to, or 0
144	char *change_root;// the path to chroot to, "/" == anonymous
145	#if ENABLE_ICMP
146	u8 icmp_type; // the icmp type for the icmp-protocol
147	#endif
148
149	char *script_if_up;
150	char *script_node_up;
151	char *script_node_change;
152	char *script_node_down;
153	char *pidfilename;
154
155	#if ENABLE_HTTP_PROXY
156	char *proxy_auth; // login:password
157	char *proxy_host; // the proxy hostname, e.g. proxy1.example.net
158	u16 proxy_port; // the proxy port, e.g. 3128
159	#endif
160
161	#if ENABLE_DNS
162	char *dns_forw_host;
163	bool dns_case_preserving;
164	u16 dns_forw_port;
165	float dns_timeout_factor;
166	float dns_send_interval;
167	float dns_overlap_factor;
168	int dns_max_outstanding;
169	#endif
170
171	void init ();
172	void cleanup ();
173	void clear ();
174
175	conf_node find_node (const char name);
176
177	// create a filename from string, replacing %s by the nodename
178	// and using relative paths under confbase.
179	char config_filename (const char name, const char *dflt = 0);
180
181	void print ();
182
183	configuration ();
184	~configuration ();
185	};
186
187	struct configuration_parser
188	{
189	configuration &conf;
190
191	bool need_keys;
192	conf_node *node;
193
194	int argc;
195	char **argv;
196
197	configuration_parser (configuration &conf, bool need_keys, int argc, char **argv);
198
199	void parse_file (const char *fname);
200	const char parse_line (char line);
201	void parse_argv ();
202	};
203
204	extern struct configuration conf;
205
206	#define THISNODE ::conf.thisnode
207
208	#endif
209