libcoro/coro.h

/*
 * Copyright (c) 2001-2008 Marc Alexander Lehmann <schmorp@schmorp.de>
 * 
 * Redistribution and use in source and binary forms, with or without modifica-
 * tion, are permitted provided that the following conditions are met:
 * 
 *   1.  Redistributions of source code must retain the above copyright notice,
 *       this list of conditions and the following disclaimer.
 * 
 *   2.  Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MER-
 * CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
 * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPE-
 * CIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTH-
 * ERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * Alternatively, the contents of this file may be used under the terms of
 * the GNU General Public License ("GPL") version 2 or any later version,
 * in which case the provisions of the GPL are applicable instead of
 * the above. If you wish to allow the use of your version of this file
 * only under the terms of the GPL and not to allow others to use your
 * version of this file under the BSD license, indicate your decision
 * by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL. If you do not delete the
 * provisions above, a recipient may use your version of this file under
 * either the BSD or the GPL.
 *
 * This library is modelled strictly after Ralf S. Engelschalls article at
 * http://www.gnu.org/software/pth/rse-pmt.ps. So most of the credit must
 * go to Ralf S. Engelschall <rse@engelschall.com>.
 *
 * This coroutine library is very much stripped down. You should either
 * build your own process abstraction using it or - better - just use GNU
 * Portable Threads, http://www.gnu.org/software/pth/.
 *
 */

/*
 * 2006-10-26 Include stddef.h on OS X to work around one of its bugs.
 *            Reported by Michael_G_Schwern.
 * 2006-11-26 Use _setjmp instead of setjmp on GNU/Linux.
 * 2007-04-27 Set unwind frame info if gcc 3+ and ELF is detected.
 *            Use _setjmp instead of setjmp on _XOPEN_SOURCE >= 600.
 * 2007-05-02 Add assembly versions for x86 and amd64 (to avoid reliance
 *            on SIGUSR2 and sigaltstack in Crossfire).
 * 2008-01-21 Disable CFI usage on anything but GNU/Linux.
 * 2008-03-02 Switched to 2-clause BSD license with GPL exception.
 * 2008-04-04 New (but highly unrecommended) pthreads backend.
 * 2008-04-24 Reinstate CORO_LOSER (had wrong stack adjustments).
 * 2008-10-30 Support assembly method on x86 with and without frame pointer.
 * 2008-11-03 Use a global asm statement for CORO_ASM, idea by pippijn.
 * 2008-11-05 Hopefully fix misaligned stacks with CORO_ASM/SETJMP.
 * 2008-11-07 rbp wasn't saved in CORO_ASM on x86_64.
 *            introduce coro_destroy, which is a nop except for pthreads.
 *            speed up CORO_PTHREAD. Do no longer leak threads either.
 *            coro_create now allows one to create source coro_contexts.
 *            do not rely on makecontext passing a void * correctly.
 *            try harder to get _setjmp/_longjmp.
 *            major code cleanup/restructuring.
 */

#ifndef CORO_H
#define CORO_H

#define CORO_VERSION 2

/*
 * Changes since API version 1:
 * replaced bogus -DCORO_LOOSE with gramatically more correct -DCORO_LOSER
 */

/*
 * This library consists of only three files
 * coro.h, coro.c and LICENSE (and optionally README)
 *
 * It implements what is known as coroutines, in a hopefully
 * portable way. At the moment you have to define which kind
 * of implementation flavour you want:
 *
 * -DCORO_UCONTEXT
 *
 *    This flavour uses SUSv2's get/set/swap/makecontext functions that
 *    unfortunately only newer unices support.
 *
 * -DCORO_SJLJ
 *
 *    This flavour uses SUSv2's setjmp/longjmp and sigaltstack functions to
 *    do it's job. Coroutine creation is much slower than UCONTEXT, but
 *    context switching is often a bit cheaper. It should work on almost
 *    all unices.
 *
 * -DCORO_LINUX
 *
 *    Old GNU/Linux systems (<= glibc-2.1) only work with this implementation
 *    (it is very fast and therefore recommended over other methods, but
 *    doesn't work with anything newer).
 *
 * -DCORO_LOSER
 *
 *    Microsoft's highly proprietary platform doesn't support sigaltstack, and
 *    this automatically selects a suitable workaround for this platform.
 *    (untested)
 *
 * -DCORO_IRIX
 *
 *    SGI's version of Microsoft's NT ;)
 *
 * -DCORO_ASM
 *
 *    Handcoded assembly, known to work only on a few architectures/ABI:
 *    ELF Linux x86 && amd64 when gcc is used and optimisation is turned on.
 *
 * -DCORO_PTHREAD
 *
 *    Use the pthread API. You have to provide <pthread.h> and -lpthread.
 *
 * If you define neither of these symbols, coro.h will try to autodetect
 * the model. This currently works for CORO_LOSER only. For the other
 * alternatives you should check (e.g. using autoconf) and define the
 * following symbols: HAVE_UCONTEXT_H / HAVE_SETJMP_H / HAVE_SIGALTSTACK.
 */

/*
 * This is the type for the initialization function of a new coroutine.
 */
typedef void (*coro_func)(void *);

/*
 * A coroutine state is saved in the following structure. Treat it as an
 * opaque type. errno and sigmask might be saved, but don't rely on it,
 * implement your own switching primitive if you need that.
 */
typedef struct coro_context coro_context;

/*
 * This function creates a new coroutine. Apart from a pointer to an
 * uninitialised coro_context, it expects a pointer to the entry function
 * and the single pointer value that is given to it as argument.
 *
 * Allocating/deallocating the stack is your own responsibility.
 *
 * As a special case, if coro, arg, sptr and ssize are all zero,
 * then an "empty" coro_contetx will be created that is suitable
 * as an initial source for coro_transfer.
 *
 * This function is not reentrant, but putting a mutex around it
 * will work.
 */
void coro_create (coro_context *ctx, /* an uninitialised coro_context */
                  coro_func coro,    /* the coroutine code to be executed */
                  void *arg,         /* a single pointer passed to the coro */
                  void *sptr,        /* start of stack area */
                  long ssize);       /* size of stack area */

/*
 * The following prototype defines the coroutine switching function. It is
 * usually implemented as a macro, so watch out.
 *
 * This function is thread-safe and reentrant.
 */
#if 0
void coro_transfer (coro_context *prev, coro_context *next);
#endif

/*
 * The following prototype defines the coroutine destroy function. It is
 * usually implemented as a macro, so watch out. It also serves
 * no purpose unless you want to use the CORO_PTHREAD backend.
 *
 * This function is thread-safe and reentrant.
 */
#if 0
void coro_destroy (coro_context *ctx);
#endif

/*
 * That was it. No other user-visible functions are implemented here.
 */

/*****************************************************************************/

#if !defined(CORO_LOSER) && !defined(CORO_UCONTEXT) \
    && !defined(CORO_SJLJ) && !defined(CORO_LINUX) \
    && !defined(CORO_IRIX) && !defined(CORO_ASM) \
    && !defined(CORO_PTHREAD)
# if defined(WINDOWS)
#  define CORO_LOSER 1 /* you don't win with windoze */
# elif defined(__linux) && (defined(__x86) || defined (__amd64))
#  define CORO_ASM 1
# elif defined(HAVE_UCONTEXT_H)
#  define CORO_UCONTEXT 1
# elif defined(HAVE_SETJMP_H) && defined(HAVE_SIGALTSTACK)
#  define CORO_SJLJ 1
# else
error unknown or unsupported architecture
# endif
#endif

/*****************************************************************************/

#if CORO_UCONTEXT

# include <ucontext.h>

struct coro_context {
  ucontext_t uc;
};

# define coro_transfer(p,n) swapcontext (&((p)->uc), &((n)->uc))
# define coro_destroy(ctx) (void *)(ctx)

#elif CORO_SJLJ || CORO_LOSER || CORO_LINUX || CORO_IRIX

# if defined(CORO_LINUX) && !defined(_GNU_SOURCE)
#  define _GNU_SOURCE /* for linux libc */
# endif

# if !CORO_LOSER
#  include <unistd.h>
# endif

/* solaris is hopelessly borked, it expands _XOPEN_UNIX to nothing */
# if __sun
#  undef _XOPEN_UNIX
#  define _XOPEN_UNIX 1
# endif

# include <setjmp.h>

struct coro_context {
#if _XOPEN_UNIX > 0 || CORO_LOSER
  jmp_buf env;
#else
  sigjmp_buf env;
#endif
};

# if _XOPEN_UNIX > 0
#  define coro_transfer(p,n) do { if (!  _setjmp ((p)->env   ))   _longjmp ((n)->env, 1); } while (0)
# elif CORO_LOSER
#  define coro_transfer(p,n) do { if (!   setjmp ((p)->env   ))    longjmp ((n)->env, 1); } while (0)
# else
#  define coro_transfer(p,n) do { if (!sigsetjmp ((p)->env, 0)) siglongjmp ((n)->env, 1); } while (0)
# endif

# define coro_destroy(ctx) (void *)(ctx)

#elif CORO_ASM

struct coro_context {
  void **sp; /* must be at offset 0 */
};

void __attribute__ ((__noinline__, __regparm__(2)))
coro_transfer (coro_context *prev, coro_context *next);

# define coro_destroy(ctx) (void *)(ctx)

#elif CORO_PTHREAD

# include <pthread.h>

extern pthread_mutex_t coro_mutex;

struct coro_context {
  pthread_cond_t cv;
  pthread_t id;
};

void coro_transfer (coro_context *prev, coro_context *next);
void coro_destroy (coro_context *ctx);

#endif

#endif

Revision:	1.36
Committed:	Sat Nov 8 13:53:27 2008 UTC (15 years, 6 months ago) by root
Content type:	text/plain
Branch:	MAIN
CVS Tags:	rel-4_9
Changes since 1.35:	+6 -0 lines
Log Message:	* empty log message *
#	Content
1	/*
2	* Copyright (c) 2001-2008 Marc Alexander Lehmann <schmorp@schmorp.de>
3	*
4	* Redistribution and use in source and binary forms, with or without modifica-
5	* tion, are permitted provided that the following conditions are met:
6	*
7	* 1. Redistributions of source code must retain the above copyright notice,
8	* this list of conditions and the following disclaimer.
9	*
10	* 2. Redistributions in binary form must reproduce the above copyright
11	* notice, this list of conditions and the following disclaimer in the
12	* documentation and/or other materials provided with the distribution.
13	*
14	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
15	* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MER-
16	* CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
17	* EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPE-
18	* CIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
19	* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
20	* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
21	* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTH-
22	* ERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
23	* OF THE POSSIBILITY OF SUCH DAMAGE.
24	*
25	* Alternatively, the contents of this file may be used under the terms of
26	* the GNU General Public License ("GPL") version 2 or any later version,
27	* in which case the provisions of the GPL are applicable instead of
28	* the above. If you wish to allow the use of your version of this file
29	* only under the terms of the GPL and not to allow others to use your
30	* version of this file under the BSD license, indicate your decision
31	* by deleting the provisions above and replace them with the notice
32	* and other provisions required by the GPL. If you do not delete the
33	* provisions above, a recipient may use your version of this file under
34	* either the BSD or the GPL.
35	*
36	* This library is modelled strictly after Ralf S. Engelschalls article at
37	* http://www.gnu.org/software/pth/rse-pmt.ps. So most of the credit must
38	* go to Ralf S. Engelschall <rse@engelschall.com>.
39	*
40	* This coroutine library is very much stripped down. You should either
41	* build your own process abstraction using it or - better - just use GNU
42	* Portable Threads, http://www.gnu.org/software/pth/.
43	*
44	*/
45
46	/*
47	* 2006-10-26 Include stddef.h on OS X to work around one of its bugs.
48	* Reported by Michael_G_Schwern.
49	* 2006-11-26 Use _setjmp instead of setjmp on GNU/Linux.
50	* 2007-04-27 Set unwind frame info if gcc 3+ and ELF is detected.
51	* Use _setjmp instead of setjmp on _XOPEN_SOURCE >= 600.
52	* 2007-05-02 Add assembly versions for x86 and amd64 (to avoid reliance
53	* on SIGUSR2 and sigaltstack in Crossfire).
54	* 2008-01-21 Disable CFI usage on anything but GNU/Linux.
55	* 2008-03-02 Switched to 2-clause BSD license with GPL exception.
56	* 2008-04-04 New (but highly unrecommended) pthreads backend.
57	* 2008-04-24 Reinstate CORO_LOSER (had wrong stack adjustments).
58	* 2008-10-30 Support assembly method on x86 with and without frame pointer.
59	* 2008-11-03 Use a global asm statement for CORO_ASM, idea by pippijn.
60	* 2008-11-05 Hopefully fix misaligned stacks with CORO_ASM/SETJMP.
61	* 2008-11-07 rbp wasn't saved in CORO_ASM on x86_64.
62	* introduce coro_destroy, which is a nop except for pthreads.
63	* speed up CORO_PTHREAD. Do no longer leak threads either.
64	* coro_create now allows one to create source coro_contexts.
65	* do not rely on makecontext passing a void * correctly.
66	* try harder to get _setjmp/_longjmp.
67	* major code cleanup/restructuring.
68	*/
69
70	#ifndef CORO_H
71	#define CORO_H
72
73	#define CORO_VERSION 2
74
75	/*
76	* Changes since API version 1:
77	* replaced bogus -DCORO_LOOSE with gramatically more correct -DCORO_LOSER
78	*/
79
80	/*
81	* This library consists of only three files
82	* coro.h, coro.c and LICENSE (and optionally README)
83	*
84	* It implements what is known as coroutines, in a hopefully
85	* portable way. At the moment you have to define which kind
86	* of implementation flavour you want:
87	*
88	* -DCORO_UCONTEXT
89	*
90	* This flavour uses SUSv2's get/set/swap/makecontext functions that
91	* unfortunately only newer unices support.
92	*
93	* -DCORO_SJLJ
94	*
95	* This flavour uses SUSv2's setjmp/longjmp and sigaltstack functions to
96	* do it's job. Coroutine creation is much slower than UCONTEXT, but
97	* context switching is often a bit cheaper. It should work on almost
98	* all unices.
99	*
100	* -DCORO_LINUX
101	*
102	* Old GNU/Linux systems (<= glibc-2.1) only work with this implementation
103	* (it is very fast and therefore recommended over other methods, but
104	* doesn't work with anything newer).
105	*
106	* -DCORO_LOSER
107	*
108	* Microsoft's highly proprietary platform doesn't support sigaltstack, and
109	* this automatically selects a suitable workaround for this platform.
110	* (untested)
111	*
112	* -DCORO_IRIX
113	*
114	* SGI's version of Microsoft's NT ;)
115	*
116	* -DCORO_ASM
117	*
118	* Handcoded assembly, known to work only on a few architectures/ABI:
119	* ELF Linux x86 && amd64 when gcc is used and optimisation is turned on.
120	*
121	* -DCORO_PTHREAD
122	*
123	* Use the pthread API. You have to provide <pthread.h> and -lpthread.
124	*
125	* If you define neither of these symbols, coro.h will try to autodetect
126	* the model. This currently works for CORO_LOSER only. For the other
127	* alternatives you should check (e.g. using autoconf) and define the
128	* following symbols: HAVE_UCONTEXT_H / HAVE_SETJMP_H / HAVE_SIGALTSTACK.
129	*/
130
131	/*
132	* This is the type for the initialization function of a new coroutine.
133	*/
134	typedef void (coro_func)(void );
135
136	/*
137	* A coroutine state is saved in the following structure. Treat it as an
138	* opaque type. errno and sigmask might be saved, but don't rely on it,
139	* implement your own switching primitive if you need that.
140	*/
141	typedef struct coro_context coro_context;
142
143	/*
144	* This function creates a new coroutine. Apart from a pointer to an
145	* uninitialised coro_context, it expects a pointer to the entry function
146	* and the single pointer value that is given to it as argument.
147	*
148	* Allocating/deallocating the stack is your own responsibility.
149	*
150	* As a special case, if coro, arg, sptr and ssize are all zero,
151	* then an "empty" coro_contetx will be created that is suitable
152	* as an initial source for coro_transfer.
153	*
154	* This function is not reentrant, but putting a mutex around it
155	* will work.
156	*/
157	void coro_create (coro_context ctx, / an uninitialised coro_context */
158	coro_func coro, /* the coroutine code to be executed */
159	void arg, / a single pointer passed to the coro */
160	void sptr, / start of stack area */
161	long ssize); /* size of stack area */
162
163	/*
164	* The following prototype defines the coroutine switching function. It is
165	* usually implemented as a macro, so watch out.
166	*
167	* This function is thread-safe and reentrant.
168	*/
169	#if 0
170	void coro_transfer (coro_context prev, coro_context next);
171	#endif
172
173	/*
174	* The following prototype defines the coroutine destroy function. It is
175	* usually implemented as a macro, so watch out. It also serves
176	* no purpose unless you want to use the CORO_PTHREAD backend.
177	*
178	* This function is thread-safe and reentrant.
179	*/
180	#if 0
181	void coro_destroy (coro_context *ctx);
182	#endif
183
184	/*
185	* That was it. No other user-visible functions are implemented here.
186	*/
187
188	/*****************************************************************************/
189
190	#if !defined(CORO_LOSER) && !defined(CORO_UCONTEXT) \
191	&& !defined(CORO_SJLJ) && !defined(CORO_LINUX) \
192	&& !defined(CORO_IRIX) && !defined(CORO_ASM) \
193	&& !defined(CORO_PTHREAD)
194	# if defined(WINDOWS)
195	# define CORO_LOSER 1 /* you don't win with windoze */
196	# elif defined(__linux) && (defined(__x86) \|\| defined (__amd64))
197	# define CORO_ASM 1
198	# elif defined(HAVE_UCONTEXT_H)
199	# define CORO_UCONTEXT 1
200	# elif defined(HAVE_SETJMP_H) && defined(HAVE_SIGALTSTACK)
201	# define CORO_SJLJ 1
202	# else
203	error unknown or unsupported architecture
204	# endif
205	#endif
206
207	/*****************************************************************************/
208
209	#if CORO_UCONTEXT
210
211	# include <ucontext.h>
212
213	struct coro_context {
214	ucontext_t uc;
215	};
216
217	# define coro_transfer(p,n) swapcontext (&((p)->uc), &((n)->uc))
218	# define coro_destroy(ctx) (void *)(ctx)
219
220	#elif CORO_SJLJ \|\| CORO_LOSER \|\| CORO_LINUX \|\| CORO_IRIX
221
222	# if defined(CORO_LINUX) && !defined(_GNU_SOURCE)
223	# define _GNU_SOURCE /* for linux libc */
224	# endif
225
226	# if !CORO_LOSER
227	# include <unistd.h>
228	# endif
229
230	/* solaris is hopelessly borked, it expands _XOPEN_UNIX to nothing */
231	# if __sun
232	# undef _XOPEN_UNIX
233	# define _XOPEN_UNIX 1
234	# endif
235
236	# include <setjmp.h>
237
238	struct coro_context {
239	#if _XOPEN_UNIX > 0 \|\| CORO_LOSER
240	jmp_buf env;
241	#else
242	sigjmp_buf env;
243	#endif
244	};
245
246	# if _XOPEN_UNIX > 0
247	# define coro_transfer(p,n) do { if (! _setjmp ((p)->env )) _longjmp ((n)->env, 1); } while (0)
248	# elif CORO_LOSER
249	# define coro_transfer(p,n) do { if (! setjmp ((p)->env )) longjmp ((n)->env, 1); } while (0)
250	# else
251	# define coro_transfer(p,n) do { if (!sigsetjmp ((p)->env, 0)) siglongjmp ((n)->env, 1); } while (0)
252	# endif
253
254	# define coro_destroy(ctx) (void *)(ctx)
255
256	#elif CORO_ASM
257
258	struct coro_context {
259	void *sp; / must be at offset 0 */
260	};
261
262	void __attribute__ ((__noinline__, __regparm__(2)))
263	coro_transfer (coro_context prev, coro_context next);
264
265	# define coro_destroy(ctx) (void *)(ctx)
266
267	#elif CORO_PTHREAD
268
269	# include <pthread.h>
270
271	extern pthread_mutex_t coro_mutex;
272
273	struct coro_context {
274	pthread_cond_t cv;
275	pthread_t id;
276	};
277
278	void coro_transfer (coro_context prev, coro_context next);
279	void coro_destroy (coro_context *ctx);
280
281	#endif
282
283	#endif
284