[ViewVC] Diff of: cvs/libev/ev.3

Comparing libev/ev.3 (file contents):
Revision 1.71 by root, Mon Sep 29 03:31:14 2008 UTC vs.
Revision 1.77 by root, Sun Feb 15 01:44:40 2009 UTC

 .\}
 .rm #[ #] #H #V #F C
 .\" ========================================================================
 .\"
 .IX Title "LIBEV 3"
-.TH LIBEV 3 "2008-09-29" "libev-3.44" "libev - high performance full featured event loop"
+.TH LIBEV 3 "2009-02-06" "libev-3.53" "libev - high performance full featured event loop"
 .\" For nroff, turn off justification.  Always turn off hyphenation; it makes
 .\" way too many mistakes in technical documents.
 .if n .ad l
 .nh
 .SH "NAME"
 .IX Subsection "EXAMPLE PROGRAM"
 .Vb 2
 \&   // a single header file is required
 \&   #include <ev.h>
 \&
+\&   #include <stdio.h> // for puts
+\&
 \&   // every watcher type has its own typedef\*(Aqd struct
-\&   // with the name ev_<type>
+\&   // with the name ev_TYPE
 \&   ev_io stdin_watcher;
 \&   ev_timer timeout_watcher;
 \&
 \&   // all watcher callbacks have a similar signature
 \&   // this callback is called when data is readable on stdin
 \&   static void
-\&   stdin_cb (EV_P_ struct ev_io *w, int revents)
+\&   stdin_cb (EV_P_ ev_io *w, int revents)
 \&   {
 \&     puts ("stdin ready");
 \&     // for one\-shot events, one must manually stop the watcher
 \&     // with its corresponding stop function.
 \&     ev_io_stop (EV_A_ w);
 \&     ev_unloop (EV_A_ EVUNLOOP_ALL);
 \&   }
 \&
 \&   // another callback, this time for a time\-out
 \&   static void
-\&   timeout_cb (EV_P_ struct ev_timer *w, int revents)
+\&   timeout_cb (EV_P_ ev_timer *w, int revents)
 \&   {
 \&     puts ("timeout");
 \&     // this causes the innermost ev_loop to stop iterating
 \&     ev_unloop (EV_A_ EVUNLOOP_ONE);
 \&   }
 Libev is very configurable. In this manual the default (and most common)
 configuration will be described, which supports multiple event loops. For
 more info about various configuration options please have a look at
 \&\fB\s-1EMBED\s0\fR section in this manual. If libev was configured without support
 for multiple event loops, then all functions taking an initial argument of
-name \f(CW\*(C`loop\*(C'\fR (which is always of type \f(CW\*(C`struct ev_loop *\*(C'\fR) will not have
+name \f(CW\*(C`loop\*(C'\fR (which is always of type \f(CW\*(C`ev_loop *\*(C'\fR) will not have
 this argument.
 .Sh "\s-1TIME\s0 \s-1REPRESENTATION\s0"
 .IX Subsection "TIME REPRESENTATION"
 Libev represents time as a single floating point number, representing the
 (fractional) number of seconds since the (\s-1POSIX\s0) epoch (somewhere near
 \&   ...
 \&   ev_set_syserr_cb (fatal_error);
 .Ve
 .SH "FUNCTIONS CONTROLLING THE EVENT LOOP"
 .IX Header "FUNCTIONS CONTROLLING THE EVENT LOOP"
-An event loop is described by a \f(CW\*(C`struct ev_loop *\*(C'\fR. The library knows two
+An event loop is described by a \f(CW\*(C`struct ev_loop *\*(C'\fR (the \f(CW\*(C`struct\*(C'\fR
-types of such loops, the \fIdefault\fR loop, which supports signals and child
+is \fInot\fR optional in this case, as there is also an \f(CW\*(C`ev_loop\*(C'\fR
-events, and dynamically created loops which do not.
+\&\fIfunction\fR).
+.PP
+The library knows two types of such loops, the \fIdefault\fR loop, which
+supports signals and child events, and dynamically created loops which do
+not.
 .IP "struct ev_loop *ev_default_loop (unsigned int flags)" 4
 .IX Item "struct ev_loop *ev_default_loop (unsigned int flags)"
 This will initialise the default event loop if it hasn't been initialised
 yet and return it. If the default loop could not be initialised, returns
 false. If it already was initialised it simply returns it (and ignores the
 If you don't know what event loop to use, use the one returned from this
 function.
 .Sp
 Note that this function is \fInot\fR thread-safe, so if you want to use it
 from multiple threads, you have to lock (note also that this is unlikely,
-as loops cannot bes hared easily between threads anyway).
+as loops cannot be shared easily between threads anyway).
 .Sp
 The default loop is the only loop that can handle \f(CW\*(C`ev_signal\*(C'\fR and
 \&\f(CW\*(C`ev_child\*(C'\fR watchers, and to do this, it always registers a handler
 for \f(CW\*(C`SIGCHLD\*(C'\fR. If this is a problem for your application you can either
 create a dynamic loop with \f(CW\*(C`ev_loop_new\*(C'\fR that doesn't do that, or you
 .el .IP "\f(CWEVBACKEND_EPOLL\fR   (value 4, Linux)" 4
 .IX Item "EVBACKEND_EPOLL   (value 4, Linux)"
 For few fds, this backend is a bit little slower than poll and select,
 but it scales phenomenally better. While poll and select usually scale
 like O(total_fds) where n is the total number of fds (or the highest fd),
-epoll scales either O(1) or O(active_fds). The epoll design has a number
+epoll scales either O(1) or O(active_fds).
-of shortcomings, such as silently dropping events in some hard-to-detect
+.Sp
-cases and requiring a system call per fd change, no fork support and bad
+The epoll mechanism deserves honorable mention as the most misdesigned
-support for dup.
+of the more advanced event mechanisms: mere annoyances include silently
+dropping file descriptors, requiring a system call per change per file
+descriptor (and unnecessary guessing of parameters), problems with dup and
+so on. The biggest issue is fork races, however \- if a program forks then
+\&\fIboth\fR parent and child process have to recreate the epoll set, which can
+take considerable time (one syscall per file descriptor) and is of course
+hard to detect.
+.Sp
+Epoll is also notoriously buggy \- embedding epoll fds \fIshould\fR work, but
+of course \fIdoesn't\fR, and epoll just loves to report events for totally
+\&\fIdifferent\fR file descriptors (even already closed ones, so one cannot
+even remove them from the set) than registered in the set (especially
+on \s-1SMP\s0 systems). Libev tries to counter these spurious notifications by
+employing an additional generation counter and comparing that against the
+events to filter out spurious ones, recreating the set when required.
 .Sp
 While stopping, setting and starting an I/O watcher in the same iteration
-will result in some caching, there is still a system call per such incident
+will result in some caching, there is still a system call per such
-(because the fd could point to a different file description now), so its
+incident (because the same \fIfile descriptor\fR could point to a different
-best to avoid that. Also, \f(CW\*(C`dup ()\*(C'\fR'ed file descriptors might not work
+\&\fIfile description\fR now), so its best to avoid that. Also, \f(CW\*(C`dup ()\*(C'\fR'ed
-very well if you register events for both fds.
+file descriptors might not work very well if you register events for both
-.Sp
+file descriptors.
-Please note that epoll sometimes generates spurious notifications, so you
-need to use non-blocking I/O or other means to avoid blocking when no data
-(or space) is available.
 .Sp
 Best performance from this backend is achieved by not unregistering all
 watchers for a file descriptor until it has been closed, if possible,
 i.e. keep at least one watcher active per fd at all times. Stopping and
 starting a watcher (without re-setting it) also usually doesn't cause
-extra overhead.
+extra overhead. A fork can both result in spurious notifications as well
+as in libev having to destroy and recreate the epoll object, which can
+take considerable time and thus should be avoided.
+.Sp
+All this means that, in practice, \f(CW\*(C`EVBACKEND_SELECT\*(C'\fR can be as fast or
+faster than epoll for maybe up to a hundred file descriptors, depending on
+the usage. So sad.
 .Sp
 While nominally embeddable in other event loops, this feature is broken in
 all kernel versions tested so far.
 .Sp
 This backend maps \f(CW\*(C`EV_READ\*(C'\fR and \f(CW\*(C`EV_WRITE\*(C'\fR in the same way as
 \&\f(CW\*(C`EVBACKEND_POLL\*(C'\fR.
 .ie n .IP """EVBACKEND_KQUEUE""  (value 8, most \s-1BSD\s0 clones)" 4
 .el .IP "\f(CWEVBACKEND_KQUEUE\fR  (value 8, most \s-1BSD\s0 clones)" 4
 .IX Item "EVBACKEND_KQUEUE  (value 8, most BSD clones)"
-Kqueue deserves special mention, as at the time of this writing, it was
+Kqueue deserves special mention, as at the time of this writing, it
-broken on all BSDs except NetBSD (usually it doesn't work reliably with
+was broken on all BSDs except NetBSD (usually it doesn't work reliably
-anything but sockets and pipes, except on Darwin, where of course it's
+with anything but sockets and pipes, except on Darwin, where of course
-completely useless). For this reason it's not being \*(L"auto-detected\*(R" unless
+it's completely useless). Unlike epoll, however, whose brokenness
-you explicitly specify it in the flags (i.e. using \f(CW\*(C`EVBACKEND_KQUEUE\*(C'\fR) or
+is by design, these kqueue bugs can (and eventually will) be fixed
-libev was compiled on a known-to-be-good (\-enough) system like NetBSD.
+without \s-1API\s0 changes to existing programs. For this reason it's not being
+\&\*(L"auto-detected\*(R" unless you explicitly specify it in the flags (i.e. using
+\&\f(CW\*(C`EVBACKEND_KQUEUE\*(C'\fR) or libev was compiled on a known-to-be-good (\-enough)
+system like NetBSD.
 .Sp
 You still can embed kqueue into a normal poll or select backend and use it
 only for sockets (after having made sure that sockets work with kqueue on
 the target platform). See \f(CW\*(C`ev_embed\*(C'\fR watchers for more info.
 .Sp
 It scales in the same way as the epoll backend, but the interface to the
 kernel is more efficient (which says nothing about its actual speed, of
 course). While stopping, setting and starting an I/O watcher does never
 cause an extra system call as with \f(CW\*(C`EVBACKEND_EPOLL\*(C'\fR, it still adds up to
-two event changes per incident. Support for \f(CW\*(C`fork ()\*(C'\fR is very bad and it
+two event changes per incident. Support for \f(CW\*(C`fork ()\*(C'\fR is very bad (but
-drops fds silently in similarly hard-to-detect cases.
+sane, unlike epoll) and it drops fds silently in similarly hard-to-detect
+cases
 .Sp
 This backend usually performs well under most conditions.
 .Sp
 While nominally embeddable in other event loops, this doesn't work
 everywhere, so you might need to test for this. And since it is broken
 almost everywhere, you should only use it when you have a lot of sockets
 (for which it usually works), by embedding it into another event loop
-(e.g. \f(CW\*(C`EVBACKEND_SELECT\*(C'\fR or \f(CW\*(C`EVBACKEND_POLL\*(C'\fR) and, did I mention it,
+(e.g. \f(CW\*(C`EVBACKEND_SELECT\*(C'\fR or \f(CW\*(C`EVBACKEND_POLL\*(C'\fR (but \f(CW\*(C`poll\*(C'\fR is of course
-using it only for sockets.
+also broken on \s-1OS\s0 X)) and, did I mention it, using it only for sockets.
 .Sp
 This backend maps \f(CW\*(C`EV_READ\*(C'\fR into an \f(CW\*(C`EVFILT_READ\*(C'\fR kevent with
 \&\f(CW\*(C`NOTE_EOF\*(C'\fR, and \f(CW\*(C`EV_WRITE\*(C'\fR into an \f(CW\*(C`EVFILT_WRITE\*(C'\fR kevent with
 \&\f(CW\*(C`NOTE_EOF\*(C'\fR.
 .ie n .IP """EVBACKEND_DEVPOLL"" (value 16, Solaris 8)" 4
 might perform better.
 .Sp
 On the positive side, with the exception of the spurious readiness
 notifications, this backend actually performed fully to specification
 in all tests and is fully embeddable, which is a rare feat among the
-OS-specific backends.
+OS-specific backends (I vastly prefer correctness over speed hacks).
 .Sp
 This backend maps \f(CW\*(C`EV_READ\*(C'\fR and \f(CW\*(C`EV_WRITE\*(C'\fR in the same way as
 \&\f(CW\*(C`EVBACKEND_POLL\*(C'\fR.
 .ie n .IP """EVBACKEND_ALL""" 4
 .el .IP "\f(CWEVBACKEND_ALL\fR" 4
 responsibility to either stop all watchers cleanly yourself \fIbefore\fR
 calling this function, or cope with the fact afterwards (which is usually
 the easiest thing, you can just ignore the watchers and/or \f(CW\*(C`free ()\*(C'\fR them
 for example).
 .Sp
-Note that certain global state, such as signal state, will not be freed by
+Note that certain global state, such as signal state (and installed signal
-this function, and related watchers (such as signal and child watchers)
+handlers), will not be freed by this function, and related watchers (such
-would need to be stopped manually.
+as signal and child watchers) would need to be stopped manually.
 .Sp
 In general it is not advisable to call this function except in the
 rare occasion where you really need to free e.g. the signal handling
 pipe fds. If you need dynamically allocated loops it is better to use
 \&\f(CW\*(C`ev_loop_new\*(C'\fR and \f(CW\*(C`ev_loop_destroy\*(C'\fR).
 the loop.
 .Sp
 A flags value of \f(CW\*(C`EVLOOP_ONESHOT\*(C'\fR will look for new events (waiting if
 necessary) and will handle those and any already outstanding ones. It
 will block your process until at least one new event arrives (which could
-be an event internal to libev itself, so there is no guarentee that a
+be an event internal to libev itself, so there is no guarantee that a
 user-registered callback will be called), and will return after one
 iteration of the loop.
 .Sp
 This is useful if you are waiting for some external event in conjunction
 with something not expressible using other libev watchers (i.e. "roll your
 has processed all outstanding events). The \f(CW\*(C`how\*(C'\fR argument must be either
 \&\f(CW\*(C`EVUNLOOP_ONE\*(C'\fR, which will make the innermost \f(CW\*(C`ev_loop\*(C'\fR call return, or
 \&\f(CW\*(C`EVUNLOOP_ALL\*(C'\fR, which will make all nested \f(CW\*(C`ev_loop\*(C'\fR calls return.
 .Sp
 This \*(L"unloop state\*(R" will be cleared when entering \f(CW\*(C`ev_loop\*(C'\fR again.
+.Sp
+It is safe to call \f(CW\*(C`ev_unloop\*(C'\fR from otuside any \f(CW\*(C`ev_loop\*(C'\fR calls.
 .IP "ev_ref (loop)" 4
 .IX Item "ev_ref (loop)"
 .PD 0
 .IP "ev_unref (loop)" 4
 .IX Item "ev_unref (loop)"
 .Sp
 Example: Create a signal watcher, but keep it from keeping \f(CW\*(C`ev_loop\*(C'\fR
 running when nothing else is active.
 .Sp
 .Vb 4
-\&   struct ev_signal exitsig;
+\&   ev_signal exitsig;
 \&   ev_signal_init (&exitsig, sig_cb, SIGINT);
 \&   ev_signal_start (loop, &exitsig);
 \&   evf_unref (loop);
 .Ve
 .Sp
 reduce iterations/wake\-ups is to use \f(CW\*(C`ev_periodic\*(C'\fR watchers and make sure
 they fire on, say, one-second boundaries only.
 .IP "ev_loop_verify (loop)" 4
 .IX Item "ev_loop_verify (loop)"
 This function only does something when \f(CW\*(C`EV_VERIFY\*(C'\fR support has been
-compiled in. which is the default for non-minimal builds. It tries to go
+compiled in, which is the default for non-minimal builds. It tries to go
 through all internal structures and checks them for validity. If anything
 is found to be inconsistent, it will print an error message to standard
 error and call \f(CW\*(C`abort ()\*(C'\fR.
 .Sp
 This can be used to catch bugs inside libev itself: under normal
 circumstances, this function will never abort as of course libev keeps its
 data structures consistent.
 .SH "ANATOMY OF A WATCHER"
 .IX Header "ANATOMY OF A WATCHER"
+In the following description, uppercase \f(CW\*(C`TYPE\*(C'\fR in names stands for the
+watcher type, e.g. \f(CW\*(C`ev_TYPE_start\*(C'\fR can mean \f(CW\*(C`ev_timer_start\*(C'\fR for timer
+watchers and \f(CW\*(C`ev_io_start\*(C'\fR for I/O watchers.
+.PP
 A watcher is a structure that you create and register to record your
 interest in some event. For instance, if you want to wait for \s-1STDIN\s0 to
 become readable, you would create an \f(CW\*(C`ev_io\*(C'\fR watcher for that:
 .PP
 .Vb 5
-\&   static void my_cb (struct ev_loop *loop, struct ev_io *w, int revents)
+\&   static void my_cb (struct ev_loop *loop, ev_io *w, int revents)
 \&   {
 \&     ev_io_stop (w);
 \&     ev_unloop (loop, EVUNLOOP_ALL);
 \&   }
 \&
 \&   struct ev_loop *loop = ev_default_loop (0);
+\&
-\&   struct ev_io stdin_watcher;
+\&   ev_io stdin_watcher;
+\&
 \&   ev_init (&stdin_watcher, my_cb);
 \&   ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
 \&   ev_io_start (loop, &stdin_watcher);
+\&
 \&   ev_loop (loop, 0);
 .Ve
 .PP
 As you can see, you are responsible for allocating the memory for your
-watcher structures (and it is usually a bad idea to do this on the stack,
+watcher structures (and it is \fIusually\fR a bad idea to do this on the
-although this can sometimes be quite valid).
+stack).
+.PP
+Each watcher has an associated watcher structure (called \f(CW\*(C`struct ev_TYPE\*(C'\fR
+or simply \f(CW\*(C`ev_TYPE\*(C'\fR, as typedefs are provided for all watcher structs).
 .PP
 Each watcher structure must be initialised by a call to \f(CW\*(C`ev_init
 (watcher *, callback)\*(C'\fR, which expects a callback to be provided. This
 callback gets invoked each time the event occurs (or, in the case of I/O
 watchers, each time the event loop detects that the file descriptor given
 is readable and/or writable).
 .PP
-Each watcher type has its own \f(CW\*(C`ev_<type>_set (watcher *, ...)\*(C'\fR macro
+Each watcher type further has its own \f(CW\*(C`ev_TYPE_set (watcher *, ...)\*(C'\fR
-with arguments specific to this watcher type. There is also a macro
+macro to configure it, with arguments specific to the watcher type. There
-to combine initialisation and setting in one call: \f(CW\*(C`ev_<type>_init
+is also a macro to combine initialisation and setting in one call: \f(CW\*(C`ev_TYPE_init (watcher *, callback, ...)\*(C'\fR.
-(watcher *, callback, ...)\*(C'\fR.
 .PP
 To make the watcher actually watch out for events, you have to start it
-with a watcher-specific start function (\f(CW\*(C`ev_<type>_start (loop, watcher
+with a watcher-specific start function (\f(CW\*(C`ev_TYPE_start (loop, watcher
 *)\*(C'\fR), and you can stop watching for events at any time by calling the
-corresponding stop function (\f(CW\*(C`ev_<type>_stop (loop, watcher *)\*(C'\fR.
+corresponding stop function (\f(CW\*(C`ev_TYPE_stop (loop, watcher *)\*(C'\fR.
 .PP
 As long as your watcher is active (has been started but not stopped) you
 must not touch the values stored in it. Most specifically you must never
-reinitialise it or call its \f(CW\*(C`set\*(C'\fR macro.
+reinitialise it or call its \f(CW\*(C`ev_TYPE_set\*(C'\fR macro.
 .PP
 Each and every callback receives the event loop pointer as first, the
 registered watcher structure as second, and a bitset of received events as
 third argument.
 .PP
 .el .IP "\f(CWEV_ERROR\fR" 4
 .IX Item "EV_ERROR"
 An unspecified error has occurred, the watcher has been stopped. This might
 happen because the watcher could not be properly started because libev
 ran out of memory, a file descriptor was found to be closed or any other
+problem. Libev considers these application bugs.
+.Sp
-problem. You best act on it by reporting the problem and somehow coping
+You best act on it by reporting the problem and somehow coping with the
-with the watcher being stopped.
+watcher being stopped. Note that well-written programs should not receive
+an error ever, so when your watcher receives it, this usually indicates a
+bug in your program.
 .Sp
 Libev will usually signal a few \*(L"dummy\*(R" events together with an error, for
 example it might indicate that a fd is readable or writable, and if your
 callbacks is well-written it can just attempt the operation and cope with
 the error from \fIread()\fR or \fIwrite()\fR. This will not work in multi-threaded
 programs, though, as the fd could already be closed and reused for another
 thing, so beware.
 .Sh "\s-1GENERIC\s0 \s-1WATCHER\s0 \s-1FUNCTIONS\s0"
 .IX Subsection "GENERIC WATCHER FUNCTIONS"
-In the following description, \f(CW\*(C`TYPE\*(C'\fR stands for the watcher type,
-e.g. \f(CW\*(C`timer\*(C'\fR for \f(CW\*(C`ev_timer\*(C'\fR watchers and \f(CW\*(C`io\*(C'\fR for \f(CW\*(C`ev_io\*(C'\fR watchers.
 .ie n .IP """ev_init"" (ev_TYPE *watcher, callback)" 4
 .el .IP "\f(CWev_init\fR (ev_TYPE *watcher, callback)" 4
 .IX Item "ev_init (ev_TYPE *watcher, callback)"
 This macro initialises the generic portion of a watcher. The contents
 of the watcher object can be arbitrary (so \f(CW\*(C`malloc\*(C'\fR will do). Only
 which rolls both calls into one.
 .Sp
 You can reinitialise a watcher at any time as long as it has been stopped
 (or never started) and there are no pending events outstanding.
 .Sp
-The callback is always of type \f(CW\*(C`void (*)(ev_loop *loop, ev_TYPE *watcher,
+The callback is always of type \f(CW\*(C`void (*)(struct ev_loop *loop, ev_TYPE *watcher,
 int revents)\*(C'\fR.
 .Sp
 Example: Initialise an \f(CW\*(C`ev_io\*(C'\fR watcher in two steps.
 .Sp
 .Vb 3
 \&   ev_io_start (EV_DEFAULT_UC, &w);
 .Ve
 .ie n .IP """ev_TYPE_stop"" (loop *, ev_TYPE *watcher)" 4
 .el .IP "\f(CWev_TYPE_stop\fR (loop *, ev_TYPE *watcher)" 4
 .IX Item "ev_TYPE_stop (loop *, ev_TYPE *watcher)"
-Stops the given watcher again (if active) and clears the pending
+Stops the given watcher if active, and clears the pending status (whether
+the watcher was active or not).
+.Sp
-status. It is possible that stopped watchers are pending (for example,
+It is possible that stopped watchers are pending \- for example,
-non-repeating timers are being stopped when they become pending), but
+non-repeating timers are being stopped when they become pending \- but
-\&\f(CW\*(C`ev_TYPE_stop\*(C'\fR ensures that the watcher is neither active nor pending. If
+calling \f(CW\*(C`ev_TYPE_stop\*(C'\fR ensures that the watcher is neither active nor
-you want to free or reuse the memory used by the watcher it is therefore a
+pending. If you want to free or reuse the memory used by the watcher it is
-good idea to always call its \f(CW\*(C`ev_TYPE_stop\*(C'\fR function.
+therefore a good idea to always call its \f(CW\*(C`ev_TYPE_stop\*(C'\fR function.
 .IP "bool ev_is_active (ev_TYPE *watcher)" 4
 .IX Item "bool ev_is_active (ev_TYPE *watcher)"
 Returns a true value iff the watcher is active (i.e. it has been started
 and not yet been stopped). As long as a watcher is active you must not modify
 it.
 The default priority used by watchers when no priority has been set is
 always \f(CW0\fR, which is supposed to not be too high and not be too low :).
 .Sp
 Setting a priority outside the range of \f(CW\*(C`EV_MINPRI\*(C'\fR to \f(CW\*(C`EV_MAXPRI\*(C'\fR is
 fine, as long as you do not mind that the priority value you query might
-or might not have been adjusted to be within valid range.
+or might not have been clamped to the valid range.
 .IP "ev_invoke (loop, ev_TYPE *watcher, int revents)" 4
 .IX Item "ev_invoke (loop, ev_TYPE *watcher, int revents)"
 Invoke the \f(CW\*(C`watcher\*(C'\fR with the given \f(CW\*(C`loop\*(C'\fR and \f(CW\*(C`revents\*(C'\fR. Neither
 \&\f(CW\*(C`loop\*(C'\fR nor \f(CW\*(C`revents\*(C'\fR need to be valid as long as the watcher callback
 can deal with that fact, as both are simply passed through to the
 data:
 .PP
 .Vb 7
 \&   struct my_io
 \&   {
-\&     struct ev_io io;
+\&     ev_io io;
 \&     int otherfd;
 \&     void *somedata;
 \&     struct whatever *mostinteresting;
 \&   };
 \&
 .PP
 And since your callback will be called with a pointer to the watcher, you
 can cast it back to your own type:
 .PP
 .Vb 5
-\&   static void my_cb (struct ev_loop *loop, struct ev_io *w_, int revents)
+\&   static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)
 \&   {
 \&     struct my_io *w = (struct my_io *)w_;
 \&     ...
 \&   }
 .Ve
 .PP
 .Vb 1
 \&   #include <stddef.h>
 \&
 \&   static void
-\&   t1_cb (EV_P_ struct ev_timer *w, int revents)
+\&   t1_cb (EV_P_ ev_timer *w, int revents)
 \&   {
 \&     struct my_biggy big = (struct my_biggy *
 \&       (((char *)w) \- offsetof (struct my_biggy, t1));
 \&   }
 \&
 \&   static void
-\&   t2_cb (EV_P_ struct ev_timer *w, int revents)
+\&   t2_cb (EV_P_ ev_timer *w, int revents)
 \&   {
 \&     struct my_biggy big = (struct my_biggy *
 \&       (((char *)w) \- offsetof (struct my_biggy, t2));
 \&   }
 .Ve
 readable, but only once. Since it is likely line-buffered, you could
 attempt to read a whole line in the callback.
 .PP
 .Vb 6
 \&   static void
-\&   stdin_readable_cb (struct ev_loop *loop, struct ev_io *w, int revents)
+\&   stdin_readable_cb (struct ev_loop *loop, ev_io *w, int revents)
 \&   {
 \&      ev_io_stop (loop, w);
 \&     .. read from stdin here (or from w\->fd) and handle any I/O errors
 \&   }
 \&
 \&   ...
 \&   struct ev_loop *loop = ev_default_init (0);
-\&   struct ev_io stdin_readable;
+\&   ev_io stdin_readable;
 \&   ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
 \&   ev_io_start (loop, &stdin_readable);
 \&   ev_loop (loop, 0);
 .Ve
 .ie n .Sh """ev_timer"" \- relative and optionally repeating timeouts"
 monotonic clock option helps a lot here).
 .PP
 The callback is guaranteed to be invoked only \fIafter\fR its timeout has
 passed, but if multiple timers become ready during the same loop iteration
 then order of execution is undefined.
+.PP
+\fIBe smart about timeouts\fR
+.IX Subsection "Be smart about timeouts"
+.PP
+Many real-world problems involve some kind of timeout, usually for error
+recovery. A typical example is an \s-1HTTP\s0 request \- if the other side hangs,
+you want to raise some error after a while.
+.PP
+What follows are some ways to handle this problem, from obvious and
+inefficient to smart and efficient.
+.PP
+In the following, a 60 second activity timeout is assumed \- a timeout that
+gets reset to 60 seconds each time there is activity (e.g. each time some
+data or other life sign was received).
+.IP "1. Use a timer and stop, reinitialise and start it on activity." 4
+.IX Item "1. Use a timer and stop, reinitialise and start it on activity."
+This is the most obvious, but not the most simple way: In the beginning,
+start the watcher:
+.Sp
+.Vb 2
+\&   ev_timer_init (timer, callback, 60., 0.);
+\&   ev_timer_start (loop, timer);
+.Ve
+.Sp
+Then, each time there is some activity, \f(CW\*(C`ev_timer_stop\*(C'\fR it, initialise it
+and start it again:
+.Sp
+.Vb 3
+\&   ev_timer_stop (loop, timer);
+\&   ev_timer_set (timer, 60., 0.);
+\&   ev_timer_start (loop, timer);
+.Ve
+.Sp
+This is relatively simple to implement, but means that each time there is
+some activity, libev will first have to remove the timer from its internal
+data structure and then add it again. Libev tries to be fast, but it's
+still not a constant-time operation.
+.ie n .IP "2. Use a timer and re-start it with ""ev_timer_again"" inactivity." 4
+.el .IP "2. Use a timer and re-start it with \f(CWev_timer_again\fR inactivity." 4
+.IX Item "2. Use a timer and re-start it with ev_timer_again inactivity."
+This is the easiest way, and involves using \f(CW\*(C`ev_timer_again\*(C'\fR instead of
+\&\f(CW\*(C`ev_timer_start\*(C'\fR.
+.Sp
+To implement this, configure an \f(CW\*(C`ev_timer\*(C'\fR with a \f(CW\*(C`repeat\*(C'\fR value
+of \f(CW60\fR and then call \f(CW\*(C`ev_timer_again\*(C'\fR at start and each time you
+successfully read or write some data. If you go into an idle state where
+you do not expect data to travel on the socket, you can \f(CW\*(C`ev_timer_stop\*(C'\fR
+the timer, and \f(CW\*(C`ev_timer_again\*(C'\fR will automatically restart it if need be.
+.Sp
+That means you can ignore both the \f(CW\*(C`ev_timer_start\*(C'\fR function and the
+\&\f(CW\*(C`after\*(C'\fR argument to \f(CW\*(C`ev_timer_set\*(C'\fR, and only ever use the \f(CW\*(C`repeat\*(C'\fR
+member and \f(CW\*(C`ev_timer_again\*(C'\fR.
+.Sp
+At start:
+.Sp
+.Vb 3
+\&   ev_timer_init (timer, callback);
+\&   timer\->repeat = 60.;
+\&   ev_timer_again (loop, timer);
+.Ve
+.Sp
+Each time there is some activity:
+.Sp
+.Vb 1
+\&   ev_timer_again (loop, timer);
+.Ve
+.Sp
+It is even possible to change the time-out on the fly, regardless of
+whether the watcher is active or not:
+.Sp
+.Vb 2
+\&   timer\->repeat = 30.;
+\&   ev_timer_again (loop, timer);
+.Ve
+.Sp
+This is slightly more efficient then stopping/starting the timer each time
+you want to modify its timeout value, as libev does not have to completely
+remove and re-insert the timer from/into its internal data structure.
+.Sp
+It is, however, even simpler than the \*(L"obvious\*(R" way to do it.
+.IP "3. Let the timer time out, but then re-arm it as required." 4
+.IX Item "3. Let the timer time out, but then re-arm it as required."
+This method is more tricky, but usually most efficient: Most timeouts are
+relatively long compared to the intervals between other activity \- in
+our example, within 60 seconds, there are usually many I/O events with
+associated activity resets.
+.Sp
+In this case, it would be more efficient to leave the \f(CW\*(C`ev_timer\*(C'\fR alone,
+but remember the time of last activity, and check for a real timeout only
+within the callback:
+.Sp
+.Vb 1
+\&   ev_tstamp last_activity; // time of last activity
+\&
+\&   static void
+\&   callback (EV_P_ ev_timer *w, int revents)
+\&   {
+\&     ev_tstamp now     = ev_now (EV_A);
+\&     ev_tstamp timeout = last_activity + 60.;
+\&
+\&     // if last_activity + 60. is older than now, we did time out
+\&     if (timeout < now)
+\&       {
+\&         // timeout occured, take action
+\&       }
+\&     else
+\&       {
+\&         // callback was invoked, but there was some activity, re\-arm
+\&         // the watcher to fire in last_activity + 60, which is
+\&         // guaranteed to be in the future, so "again" is positive:
+\&         w\->repeat = timeout \- now;
+\&         ev_timer_again (EV_A_ w);
+\&       }
+\&   }
+.Ve
+.Sp
+To summarise the callback: first calculate the real timeout (defined
+as \*(L"60 seconds after the last activity\*(R"), then check if that time has
+been reached, which means something \fIdid\fR, in fact, time out. Otherwise
+the callback was invoked too early (\f(CW\*(C`timeout\*(C'\fR is in the future), so
+re-schedule the timer to fire at that future time, to see if maybe we have
+a timeout then.
+.Sp
+Note how \f(CW\*(C`ev_timer_again\*(C'\fR is used, taking advantage of the
+\&\f(CW\*(C`ev_timer_again\*(C'\fR optimisation when the timer is already running.
+.Sp
+This scheme causes more callback invocations (about one every 60 seconds
+minus half the average time between activity), but virtually no calls to
+libev to change the timeout.
+.Sp
+To start the timer, simply initialise the watcher and set \f(CW\*(C`last_activity\*(C'\fR
+to the current time (meaning we just have some activity :), then call the
+callback, which will \*(L"do the right thing\*(R" and start the timer:
+.Sp
+.Vb 3
+\&   ev_timer_init (timer, callback);
+\&   last_activity = ev_now (loop);
+\&   callback (loop, timer, EV_TIMEOUT);
+.Ve
+.Sp
+And when there is some activity, simply store the current time in
+\&\f(CW\*(C`last_activity\*(C'\fR, no libev calls at all:
+.Sp
+.Vb 1
+\&   last_actiivty = ev_now (loop);
+.Ve
+.Sp
+This technique is slightly more complex, but in most cases where the
+time-out is unlikely to be triggered, much more efficient.
+.Sp
+Changing the timeout is trivial as well (if it isn't hard-coded in the
+callback :) \- just change the timeout and invoke the callback, which will
+fix things for you.
+.IP "4. Wee, just use a double-linked list for your timeouts." 4
+.IX Item "4. Wee, just use a double-linked list for your timeouts."
+If there is not one request, but many thousands (millions...), all
+employing some kind of timeout with the same timeout value, then one can
+do even better:
+.Sp
+When starting the timeout, calculate the timeout value and put the timeout
+at the \fIend\fR of the list.
+.Sp
+Then use an \f(CW\*(C`ev_timer\*(C'\fR to fire when the timeout at the \fIbeginning\fR of
+the list is expected to fire (for example, using the technique #3).
+.Sp
+When there is some activity, remove the timer from the list, recalculate
+the timeout, append it to the end of the list again, and make sure to
+update the \f(CW\*(C`ev_timer\*(C'\fR if it was taken from the beginning of the list.
+.Sp
+This way, one can manage an unlimited number of timeouts in O(1) time for
+starting, stopping and updating the timers, at the expense of a major
+complication, and having to use a constant timeout. The constant timeout
+ensures that the list stays sorted.
+.PP
+So which method the best?
+.PP
+Method #2 is a simple no-brain-required solution that is adequate in most
+situations. Method #3 requires a bit more thinking, but handles many cases
+better, and isn't very complicated either. In most case, choosing either
+one is fine, with #3 being better in typical situations.
+.PP
+Method #1 is almost always a bad idea, and buys you nothing. Method #4 is
+rather complicated, but extremely efficient, something that really pays
+off after the first million or so of active timers, i.e. it's usually
+overkill :)
 .PP
 \fIThe special problem of time updates\fR
 .IX Subsection "The special problem of time updates"
 .PP
 Establishing the current time is a costly operation (it usually takes at
 If the timer is started but non-repeating, stop it (as if it timed out).
 .Sp
 If the timer is repeating, either start it if necessary (with the
 \&\f(CW\*(C`repeat\*(C'\fR value), or reset the running timer to the \f(CW\*(C`repeat\*(C'\fR value.
 .Sp
-This sounds a bit complicated, but here is a useful and typical
+This sounds a bit complicated, see \*(L"Be smart about timeouts\*(R", above, for a
-example: Imagine you have a \s-1TCP\s0 connection and you want a so-called idle
+usage example.
-timeout, that is, you want to be called when there have been, say, 60
-seconds of inactivity on the socket. The easiest way to do this is to
-configure an \f(CW\*(C`ev_timer\*(C'\fR with a \f(CW\*(C`repeat\*(C'\fR value of \f(CW60\fR and then call
-\&\f(CW\*(C`ev_timer_again\*(C'\fR each time you successfully read or write some data. If
-you go into an idle state where you do not expect data to travel on the
-socket, you can \f(CW\*(C`ev_timer_stop\*(C'\fR the timer, and \f(CW\*(C`ev_timer_again\*(C'\fR will
-automatically restart it if need be.
-.Sp
-That means you can ignore the \f(CW\*(C`after\*(C'\fR value and \f(CW\*(C`ev_timer_start\*(C'\fR
-altogether and only ever use the \f(CW\*(C`repeat\*(C'\fR value and \f(CW\*(C`ev_timer_again\*(C'\fR:
-.Sp
-.Vb 8
-\&   ev_timer_init (timer, callback, 0., 5.);
-\&   ev_timer_again (loop, timer);
-\&   ...
-\&   timer\->again = 17.;
-\&   ev_timer_again (loop, timer);
-\&   ...
-\&   timer\->again = 10.;
-\&   ev_timer_again (loop, timer);
-.Ve
-.Sp
-This is more slightly efficient then stopping/starting the timer each time
-you want to modify its timeout value.
-.Sp
-Note, however, that it is often even more efficient to remember the
-time of the last activity and let the timer time-out naturally. In the
-callback, you then check whether the time-out is real, or, if there was
-some activity, you reschedule the watcher to time-out in \*(L"last_activity +
-timeout \- ev_now ()\*(R" seconds.
 .IP "ev_tstamp repeat [read\-write]" 4
 .IX Item "ev_tstamp repeat [read-write]"
 The current \f(CW\*(C`repeat\*(C'\fR value. Will be used each time the watcher times out
 or \f(CW\*(C`ev_timer_again\*(C'\fR is called, and determines the next timeout (if any),
 which is also when any modifications are taken into account.
 .PP
 Example: Create a timer that fires after 60 seconds.
 .PP
 .Vb 5
 \&   static void
-\&   one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)
+\&   one_minute_cb (struct ev_loop *loop, ev_timer *w, int revents)
 \&   {
 \&     .. one minute over, w is actually stopped right here
 \&   }
 \&
-\&   struct ev_timer mytimer;
+\&   ev_timer mytimer;
 \&   ev_timer_init (&mytimer, one_minute_cb, 60., 0.);
 \&   ev_timer_start (loop, &mytimer);
 .Ve
 .PP
 Example: Create a timeout timer that times out after 10 seconds of
 inactivity.
 .PP
 .Vb 5
 \&   static void
-\&   timeout_cb (struct ev_loop *loop, struct ev_timer *w, int revents)
+\&   timeout_cb (struct ev_loop *loop, ev_timer *w, int revents)
 \&   {
 \&     .. ten seconds without any activity
 \&   }
 \&
-\&   struct ev_timer mytimer;
+\&   ev_timer mytimer;
 \&   ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
 \&   ev_timer_again (&mytimer); /* start timer */
 \&   ev_loop (loop, 0);
 \&
 \&   // and in some piece of code that gets executed on any "activity":
 .Sp
 If you need to stop it, return \f(CW\*(C`now + 1e30\*(C'\fR (or so, fudge fudge) and stop
 it afterwards (e.g. by starting an \f(CW\*(C`ev_prepare\*(C'\fR watcher, which is the
 only event loop modification you are allowed to do).
 .Sp
-The callback prototype is \f(CW\*(C`ev_tstamp (*reschedule_cb)(struct ev_periodic
+The callback prototype is \f(CW\*(C`ev_tstamp (*reschedule_cb)(ev_periodic
 *w, ev_tstamp now)\*(C'\fR, e.g.:
 .Sp
-.Vb 4
+.Vb 5
+\&   static ev_tstamp
-\&   static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)
+\&   my_rescheduler (ev_periodic *w, ev_tstamp now)
 \&   {
 \&     return now + 60.;
 \&   }
 .Ve
 .Sp
 .IP "ev_tstamp interval [read\-write]" 4
 .IX Item "ev_tstamp interval [read-write]"
 The current interval value. Can be modified any time, but changes only
 take effect when the periodic timer fires or \f(CW\*(C`ev_periodic_again\*(C'\fR is being
 called.
-.IP "ev_tstamp (*reschedule_cb)(struct ev_periodic *w, ev_tstamp now) [read\-write]" 4
+.IP "ev_tstamp (*reschedule_cb)(ev_periodic *w, ev_tstamp now) [read\-write]" 4
-.IX Item "ev_tstamp (*reschedule_cb)(struct ev_periodic *w, ev_tstamp now) [read-write]"
+.IX Item "ev_tstamp (*reschedule_cb)(ev_periodic *w, ev_tstamp now) [read-write]"
 The current reschedule callback, or \f(CW0\fR, if this functionality is
 switched off. Can be changed any time, but changes only take effect when
 the periodic timer fires or \f(CW\*(C`ev_periodic_again\*(C'\fR is being called.
 .PP
 \fIExamples\fR
 system time is divisible by 3600. The callback invocation times have
 potentially a lot of jitter, but good long-term stability.
 .PP
 .Vb 5
 \&   static void
-\&   clock_cb (struct ev_loop *loop, struct ev_io *w, int revents)
+\&   clock_cb (struct ev_loop *loop, ev_io *w, int revents)
 \&   {
 \&     ... its now a full hour (UTC, or TAI or whatever your clock follows)
 \&   }
 \&
-\&   struct ev_periodic hourly_tick;
+\&   ev_periodic hourly_tick;
 \&   ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);
 \&   ev_periodic_start (loop, &hourly_tick);
 .Ve
 .PP
 Example: The same as above, but use a reschedule callback to do it:
 .PP
 .Vb 1
 \&   #include <math.h>
 \&
 \&   static ev_tstamp
-\&   my_scheduler_cb (struct ev_periodic *w, ev_tstamp now)
+\&   my_scheduler_cb (ev_periodic *w, ev_tstamp now)
 \&   {
 \&     return now + (3600. \- fmod (now, 3600.));
 \&   }
 \&
 \&   ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);
 .Ve
 .PP
 Example: Call a callback every hour, starting now:
 .PP
 .Vb 4
-\&   struct ev_periodic hourly_tick;
+\&   ev_periodic hourly_tick;
 \&   ev_periodic_init (&hourly_tick, clock_cb,
 \&                     fmod (ev_now (loop), 3600.), 3600., 0);
 \&   ev_periodic_start (loop, &hourly_tick);
 .Ve
 .ie n .Sh """ev_signal"" \- signal me when a signal gets signalled!"
 The signal the watcher watches out for.
 .PP
 \fIExamples\fR
 .IX Subsection "Examples"
 .PP
-Example: Try to exit cleanly on \s-1SIGINT\s0 and \s-1SIGTERM\s0.
+Example: Try to exit cleanly on \s-1SIGINT\s0.
 .PP
 .Vb 5
 \&   static void
-\&   sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)
+\&   sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)
 \&   {
 \&     ev_unloop (loop, EVUNLOOP_ALL);
 \&   }
 \&
-\&   struct ev_signal signal_watcher;
+\&   ev_signal signal_watcher;
 \&   ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
-\&   ev_signal_start (loop, &sigint_cb);
+\&   ev_signal_start (loop, &signal_watcher);
 .Ve
 .ie n .Sh """ev_child"" \- watch out for process status changes"
 .el .Sh "\f(CWev_child\fP \- watch out for process status changes"
 .IX Subsection "ev_child - watch out for process status changes"
 Child watchers trigger when your process receives a \s-1SIGCHLD\s0 in response to
 .PP
 .Vb 1
 \&   ev_child cw;
 \&
 \&   static void
-\&   child_cb (EV_P_ struct ev_child *w, int revents)
+\&   child_cb (EV_P_ ev_child *w, int revents)
 \&   {
 \&     ev_child_stop (EV_A_ w);
 \&     printf ("process %d exited with status %x\en", w\->rpid, w\->rstatus);
 \&   }
 \&
 .Ve
 .ie n .Sh """ev_stat"" \- did the file attributes just change?"
 .el .Sh "\f(CWev_stat\fP \- did the file attributes just change?"
 .IX Subsection "ev_stat - did the file attributes just change?"
 This watches a file system path for attribute changes. That is, it calls
-\&\f(CW\*(C`stat\*(C'\fR regularly (or when the \s-1OS\s0 says it changed) and sees if it changed
+\&\f(CW\*(C`stat\*(C'\fR on that path in regular intervals (or when the \s-1OS\s0 says it changed)
-compared to the last time, invoking the callback if it did.
+and sees if it changed compared to the last time, invoking the callback if
+it did.
 .PP
 The path does not need to exist: changing from \*(L"path exists\*(R" to \*(L"path does
-not exist\*(R" is a status change like any other. The condition \*(L"path does
+not exist\*(R" is a status change like any other. The condition \*(L"path does not
-not exist\*(R" is signified by the \f(CW\*(C`st_nlink\*(C'\fR field being zero (which is
+exist\*(R" (or more correctly \*(L"path cannot be stat'ed\*(R") is signified by the
-otherwise always forced to be at least one) and all the other fields of
+\&\f(CW\*(C`st_nlink\*(C'\fR field being zero (which is otherwise always forced to be at
-the stat buffer having unspecified contents.
+least one) and all the other fields of the stat buffer having unspecified
+contents.
 .PP
-The path \fIshould\fR be absolute and \fImust not\fR end in a slash. If it is
+The path \fImust not\fR end in a slash or contain special components such as
+\&\f(CW\*(C`.\*(C'\fR or \f(CW\*(C`..\*(C'\fR. The path \fIshould\fR be absolute: If it is relative and
-relative and your working directory changes, the behaviour is undefined.
+your working directory changes, then the behaviour is undefined.
 .PP
-Since there is no standard kernel interface to do this, the portable
+Since there is no portable change notification interface available, the
-implementation simply calls \f(CW\*(C`stat (2)\*(C'\fR regularly on the path to see if
+portable implementation simply calls \f(CWstat(2)\fR regularly on the path
-it changed somehow. You can specify a recommended polling interval for
+to see if it changed somehow. You can specify a recommended polling
-this case. If you specify a polling interval of \f(CW0\fR (highly recommended!)
+interval for this case. If you specify a polling interval of \f(CW0\fR (highly
-then a \fIsuitable, unspecified default\fR value will be used (which
+recommended!) then a \fIsuitable, unspecified default\fR value will be used
-you can expect to be around five seconds, although this might change
+(which you can expect to be around five seconds, although this might
-dynamically). Libev will also impose a minimum interval which is currently
+change dynamically). Libev will also impose a minimum interval which is
-around \f(CW0.1\fR, but thats usually overkill.
+currently around \f(CW0.1\fR, but that's usually overkill.
 .PP
 This watcher type is not meant for massive numbers of stat watchers,
 as even with OS-supported change notifications, this can be
 resource-intensive.
 .PP
 At the time of this writing, the only OS-specific interface implemented
-is the Linux inotify interface (implementing kqueue support is left as
+is the Linux inotify interface (implementing kqueue support is left as an
-an exercise for the reader. Note, however, that the author sees no way
+exercise for the reader. Note, however, that the author sees no way of
-of implementing \f(CW\*(C`ev_stat\*(C'\fR semantics with kqueue).
+implementing \f(CW\*(C`ev_stat\*(C'\fR semantics with kqueue, except as a hint).
 .PP
 \fI\s-1ABI\s0 Issues (Largefile Support)\fR
 .IX Subsection "ABI Issues (Largefile Support)"
 .PP
 Libev by default (unless the user overrides this) uses the default
 support disabled by default, you get the 32 bit version of the stat
 structure. When using the library from programs that change the \s-1ABI\s0 to
 use 64 bit file offsets the programs will fail. In that case you have to
 compile libev with the same flags to get binary compatibility. This is
 obviously the case with any flags that change the \s-1ABI\s0, but the problem is
-most noticeably disabled with ev_stat and large file support.
+most noticeably displayed with ev_stat and large file support.
 .PP
 The solution for this is to lobby your distribution maker to make large
 file interfaces available by default (as e.g. FreeBSD does) and not
 optional. Libev cannot simply switch on large file support because it has
 to exchange stat structures with application programs compiled using the
 default compilation environment.
 .PP
 \fIInotify and Kqueue\fR
 .IX Subsection "Inotify and Kqueue"
 .PP
-When \f(CW\*(C`inotify (7)\*(C'\fR support has been compiled into libev (generally only
+When \f(CW\*(C`inotify (7)\*(C'\fR support has been compiled into libev and present at
-available with Linux) and present at runtime, it will be used to speed up
+runtime, it will be used to speed up change detection where possible. The
-change detection where possible. The inotify descriptor will be created lazily
+inotify descriptor will be created lazily when the first \f(CW\*(C`ev_stat\*(C'\fR
-when the first \f(CW\*(C`ev_stat\*(C'\fR watcher is being started.
+watcher is being started.
 .PP
 Inotify presence does not change the semantics of \f(CW\*(C`ev_stat\*(C'\fR watchers
 except that changes might be detected earlier, and in some cases, to avoid
 making regular \f(CW\*(C`stat\*(C'\fR calls. Even in the presence of inotify support
 there are many cases where libev has to resort to regular \f(CW\*(C`stat\*(C'\fR polling,
-but as long as the path exists, libev usually gets away without polling.
+but as long as kernel 2.6.25 or newer is used (2.6.24 and older have too
+many bugs), the path exists (i.e. stat succeeds), and the path resides on
+a local filesystem (libev currently assumes only ext2/3, jfs, reiserfs and
+xfs are fully working) libev usually gets away without polling.
 .PP
 There is no support for kqueue, as apparently it cannot be used to
 implement this functionality, due to the requirement of having a file
 descriptor open on the object at all times, and detecting renames, unlinks
 etc. is difficult.
 .PP
+\fI\f(CI\*(C`stat ()\*(C'\fI is a synchronous operation\fR
+.IX Subsection "stat () is a synchronous operation"
+.PP
+Libev doesn't normally do any kind of I/O itself, and so is not blocking
+the process. The exception are \f(CW\*(C`ev_stat\*(C'\fR watchers \- those call \f(CW\*(C`stat
+()\*(C'\fR, which is a synchronous operation.
+.PP
+For local paths, this usually doesn't matter: unless the system is very
+busy or the intervals between stat's are large, a stat call will be fast,
+as the path data is usually in memory already (except when starting the
+watcher).
+.PP
+For networked file systems, calling \f(CW\*(C`stat ()\*(C'\fR can block an indefinite
+time due to network issues, and even under good conditions, a stat call
+often takes multiple milliseconds.
+.PP
+Therefore, it is best to avoid using \f(CW\*(C`ev_stat\*(C'\fR watchers on networked
+paths, although this is fully supported by libev.
+.PP
 \fIThe special problem of stat time resolution\fR
 .IX Subsection "The special problem of stat time resolution"
 .PP
-The \f(CW\*(C`stat ()\*(C'\fR system call only supports full-second resolution portably, and
+The \f(CW\*(C`stat ()\*(C'\fR system call only supports full-second resolution portably,
-even on systems where the resolution is higher, most file systems still
+and even on systems where the resolution is higher, most file systems
-only support whole seconds.
+still only support whole seconds.
 .PP
 That means that, if the time is the only thing that changes, you can
 easily miss updates: on the first update, \f(CW\*(C`ev_stat\*(C'\fR detects a change and
 calls your callback, which does something. When there is another update
 within the same second, \f(CW\*(C`ev_stat\*(C'\fR will be unable to detect unless the
 Example: Dynamically allocate an \f(CW\*(C`ev_idle\*(C'\fR watcher, start it, and in the
 callback, free it. Also, use no error checking, as usual.
 .PP
 .Vb 7
 \&   static void
-\&   idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)
+\&   idle_cb (struct ev_loop *loop, ev_idle *w, int revents)
 \&   {
 \&     free (w);
 \&     // now do something you wanted to do when the program has
 \&     // no longer anything immediate to do.
 \&   }
 \&
-\&   struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));
+\&   ev_idle *idle_watcher = malloc (sizeof (ev_idle));
 \&   ev_idle_init (idle_watcher, idle_cb);
 \&   ev_idle_start (loop, idle_cb);
 .Ve
 .ie n .Sh """ev_prepare""\fP and \f(CW""ev_check"" \- customise your event loop!"
 .el .Sh "\f(CWev_prepare\fP and \f(CWev_check\fP \- customise your event loop!"
 .Vb 2
 \&   static ev_io iow [nfd];
 \&   static ev_timer tw;
 \&
 \&   static void
-\&   io_cb (ev_loop *loop, ev_io *w, int revents)
+\&   io_cb (struct ev_loop *loop, ev_io *w, int revents)
 \&   {
 \&   }
 \&
 \&   // create io watchers for each fd and a timer before blocking
 \&   static void
-\&   adns_prepare_cb (ev_loop *loop, ev_prepare *w, int revents)
+\&   adns_prepare_cb (struct ev_loop *loop, ev_prepare *w, int revents)
 \&   {
 \&     int timeout = 3600000;
 \&     struct pollfd fds [nfd];
 \&     // actual code will need to loop here and realloc etc.
 \&     adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
 \&       }
 \&   }
 \&
 \&   // stop all watchers after blocking
 \&   static void
-\&   adns_check_cb (ev_loop *loop, ev_check *w, int revents)
+\&   adns_check_cb (struct ev_loop *loop, ev_check *w, int revents)
 \&   {
 \&     ev_timer_stop (loop, &tw);
 \&
 \&     for (int i = 0; i < nfd; ++i)
 \&       {
 some fds have to be watched and handled very quickly (with low latency),
 and even priorities and idle watchers might have too much overhead. In
 this case you would put all the high priority stuff in one loop and all
 the rest in a second one, and embed the second one in the first.
 .PP
-As long as the watcher is active, the callback will be invoked every time
+As long as the watcher is active, the callback will be invoked every
-there might be events pending in the embedded loop. The callback must then
+time there might be events pending in the embedded loop. The callback
-call \f(CW\*(C`ev_embed_sweep (mainloop, watcher)\*(C'\fR to make a single sweep and invoke
+must then call \f(CW\*(C`ev_embed_sweep (mainloop, watcher)\*(C'\fR to make a single
-their callbacks (you could also start an idle watcher to give the embedded
+sweep and invoke their callbacks (the callback doesn't need to invoke the
-loop strictly lower priority for example). You can also set the callback
+\&\f(CW\*(C`ev_embed_sweep\*(C'\fR function directly, it could also start an idle watcher
-to \f(CW0\fR, in which case the embed watcher will automatically execute the
+to give the embedded loop strictly lower priority for example).
-embedded loop sweep.
 .PP
-As long as the watcher is started it will automatically handle events. The
+You can also set the callback to \f(CW0\fR, in which case the embed watcher
-callback will be invoked whenever some events have been handled. You can
+will automatically execute the embedded loop sweep whenever necessary.
-set the callback to \f(CW0\fR to avoid having to specify one if you are not
-interested in that.
 .PP
-Also, there have not currently been made special provisions for forking:
+Fork detection will be handled transparently while the \f(CW\*(C`ev_embed\*(C'\fR watcher
-when you fork, you not only have to call \f(CW\*(C`ev_loop_fork\*(C'\fR on both loops,
+is active, i.e., the embedded loop will automatically be forked when the
-but you will also have to stop and restart any \f(CW\*(C`ev_embed\*(C'\fR watchers
+embedding loop forks. In other cases, the user is responsible for calling
-yourself \- but you can use a fork watcher to handle this automatically,
+\&\f(CW\*(C`ev_loop_fork\*(C'\fR on the embedded loop.
-and future versions of libev might do just that.
 .PP
 Unfortunately, not all backends are embeddable: only the ones returned by
 \&\f(CW\*(C`ev_embeddable_backends\*(C'\fR are, which, unfortunately, does not include any
 portable one.
 .PP
 used).
 .PP
 .Vb 3
 \&   struct ev_loop *loop_hi = ev_default_init (0);
 \&   struct ev_loop *loop_lo = 0;
-\&   struct ev_embed embed;
+\&   ev_embed embed;
 \&
 \&   // see if there is a chance of getting one that works
 \&   // (remember that a flags value of 0 means autodetection)
 \&   loop_lo = ev_embeddable_backends () & ev_recommended_backends ()
 \&     ? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())
 \&\f(CW\*(C`loop_socket\*(C'\fR. (One might optionally use \f(CW\*(C`EVFLAG_NOENV\*(C'\fR, too).
 .PP
 .Vb 3
 \&   struct ev_loop *loop = ev_default_init (0);
 \&   struct ev_loop *loop_socket = 0;
-\&   struct ev_embed embed;
+\&   ev_embed embed;
 \&
 \&   if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
 \&     if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
 \&       {
 \&         ev_embed_init (&embed, 0, loop_socket);
 queue. But at least I can tell you how to implement locking around your
 queue:
 .IP "queueing from a signal handler context" 4
 .IX Item "queueing from a signal handler context"
 To implement race-free queueing, you simply add to the queue in the signal
-handler but you block the signal handler in the watcher callback. Here is an example that does that for
+handler but you block the signal handler in the watcher callback. Here is
-some fictitious \s-1SIGUSR1\s0 handler:
+an example that does that for some fictitious \s-1SIGUSR1\s0 handler:
 .Sp
 .Vb 1
 \&   static ev_async mysig;
 \&
 \&   static void
 \fIWatcher-Specific Functions and Data Members\fR
 .IX Subsection "Watcher-Specific Functions and Data Members"
 .IP "ev_async_init (ev_async *, callback)" 4
 .IX Item "ev_async_init (ev_async *, callback)"
 Initialises and configures the async watcher \- it has no parameters of any
-kind. There is a \f(CW\*(C`ev_asynd_set\*(C'\fR macro, but using it is utterly pointless,
+kind. There is a \f(CW\*(C`ev_async_set\*(C'\fR macro, but using it is utterly pointless,
 trust me.
 .IP "ev_async_send (loop, ev_async *)" 4
 .IX Item "ev_async_send (loop, ev_async *)"
 Sends/signals/activates the given \f(CW\*(C`ev_async\*(C'\fR watcher, that is, feeds
 an \f(CW\*(C`EV_ASYNC\*(C'\fR event on the watcher into the event loop. Unlike
 .IX Header "OTHER FUNCTIONS"
 There are some other functions of possible interest. Described. Here. Now.
 .IP "ev_once (loop, int fd, int events, ev_tstamp timeout, callback)" 4
 .IX Item "ev_once (loop, int fd, int events, ev_tstamp timeout, callback)"
 This function combines a simple timer and an I/O watcher, calls your
-callback on whichever event happens first and automatically stop both
+callback on whichever event happens first and automatically stops both
 watchers. This is useful if you want to wait for a single event on an fd
 or timeout without having to allocate/configure/start/stop/free one or
 more watchers yourself.
 .Sp
-If \f(CW\*(C`fd\*(C'\fR is less than 0, then no I/O watcher will be started and events
+If \f(CW\*(C`fd\*(C'\fR is less than 0, then no I/O watcher will be started and the
-is being ignored. Otherwise, an \f(CW\*(C`ev_io\*(C'\fR watcher for the given \f(CW\*(C`fd\*(C'\fR and
+\&\f(CW\*(C`events\*(C'\fR argument is being ignored. Otherwise, an \f(CW\*(C`ev_io\*(C'\fR watcher for
-\&\f(CW\*(C`events\*(C'\fR set will be created and started.
+the given \f(CW\*(C`fd\*(C'\fR and \f(CW\*(C`events\*(C'\fR set will be created and started.
 .Sp
 If \f(CW\*(C`timeout\*(C'\fR is less than 0, then no timeout watcher will be
 started. Otherwise an \f(CW\*(C`ev_timer\*(C'\fR watcher with after = \f(CW\*(C`timeout\*(C'\fR (and
-repeat = 0) will be started. While \f(CW0\fR is a valid timeout, it is of
+repeat = 0) will be started. \f(CW0\fR is a valid timeout.
-dubious value.
 .Sp
 The callback has the type \f(CW\*(C`void (*cb)(int revents, void *arg)\*(C'\fR and gets
 passed an \f(CW\*(C`revents\*(C'\fR set like normal event callbacks (a combination of
 \&\f(CW\*(C`EV_ERROR\*(C'\fR, \f(CW\*(C`EV_READ\*(C'\fR, \f(CW\*(C`EV_WRITE\*(C'\fR or \f(CW\*(C`EV_TIMEOUT\*(C'\fR) and the \f(CW\*(C`arg\*(C'\fR
-value passed to \f(CW\*(C`ev_once\*(C'\fR:
+value passed to \f(CW\*(C`ev_once\*(C'\fR. Note that it is possible to receive \fIboth\fR
+a timeout and an io event at the same time \- you probably should give io
+events precedence.
+.Sp
+Example: wait up to ten seconds for data to appear on \s-1STDIN_FILENO\s0.
 .Sp
 .Vb 7
 \&   static void stdin_ready (int revents, void *arg)
 \&   {
+\&     if (revents & EV_READ)
+\&       /* stdin might have data for us, joy! */;
-\&     if (revents & EV_TIMEOUT)
+\&     else if (revents & EV_TIMEOUT)
 \&       /* doh, nothing entered */;
-\&     else if (revents & EV_READ)
-\&       /* stdin might have data for us, joy! */;
 \&   }
 \&
 \&   ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
 .Ve
-.IP "ev_feed_event (ev_loop *, watcher *, int revents)" 4
+.IP "ev_feed_event (struct ev_loop *, watcher *, int revents)" 4
-.IX Item "ev_feed_event (ev_loop *, watcher *, int revents)"
+.IX Item "ev_feed_event (struct ev_loop *, watcher *, int revents)"
 Feeds the given event set into the event loop, as if the specified event
 had happened for the specified watcher (which must be a pointer to an
 initialised but not necessarily started event watcher).
-.IP "ev_feed_fd_event (ev_loop *, int fd, int revents)" 4
+.IP "ev_feed_fd_event (struct ev_loop *, int fd, int revents)" 4
-.IX Item "ev_feed_fd_event (ev_loop *, int fd, int revents)"
+.IX Item "ev_feed_fd_event (struct ev_loop *, int fd, int revents)"
 Feed an event on the given fd, as if a file descriptor backend detected
 the given events it.
-.IP "ev_feed_signal_event (ev_loop *loop, int signum)" 4
+.IP "ev_feed_signal_event (struct ev_loop *loop, int signum)" 4
-.IX Item "ev_feed_signal_event (ev_loop *loop, int signum)"
+.IX Item "ev_feed_signal_event (struct ev_loop *loop, int signum)"
 Feed an event as if the given signal occurred (\f(CW\*(C`loop\*(C'\fR must be the default
 loop!).
 .SH "LIBEVENT EMULATION"
 .IX Header "LIBEVENT EMULATION"
 Libev offers a compatibility emulation layer for libevent. It cannot
 \&   }
 \&
 \&   myclass obj;
 \&   ev::io iow;
 \&   iow.set <myclass, &myclass::io_cb> (&obj);
+.Ve
+.IP "w\->set (object *)" 4
+.IX Item "w->set (object *)"
+This is an \fBexperimental\fR feature that might go away in a future version.
+.Sp
+This is a variation of a method callback \- leaving out the method to call
+will default the method to \f(CW\*(C`operator ()\*(C'\fR, which makes it possible to use
+functor objects without having to manually specify the \f(CW\*(C`operator ()\*(C'\fR all
+the time. Incidentally, you can then also leave out the template argument
+list.
+.Sp
+The \f(CW\*(C`operator ()\*(C'\fR method prototype must be \f(CW\*(C`void operator ()(watcher &w,
+int revents)\*(C'\fR.
+.Sp
+See the method\-\f(CW\*(C`set\*(C'\fR above for more details.
+.Sp
+Example: use a functor object as callback.
+.Sp
+.Vb 7
+\&   struct myfunctor
+\&   {
+\&     void operator() (ev::io &w, int revents)
+\&     {
+\&       ...
+\&     }
+\&   }
+\&
+\&   myfunctor f;
+\&
+\&   ev::io w;
+\&   w.set (&f);
 .Ve
 .IP "w\->set<function> (void *data = 0)" 4
 .IX Item "w->set<function> (void *data = 0)"
 Also sets a callback, but uses a static method or plain function as
 callback. The optional \f(CW\*(C`data\*(C'\fR argument will be stored in the watcher's
 .IX Item "Ruby"
 Tony Arcieri has written a ruby extension that offers access to a subset
 of the libev \s-1API\s0 and adds file handle abstractions, asynchronous \s-1DNS\s0 and
 more on top of it. It can be found via gem servers. Its homepage is at
 <http://rev.rubyforge.org/>.
+.Sp
+Roger Pack reports that using the link order \f(CW\*(C`\-lws2_32 \-lmsvcrt\-ruby\-190\*(C'\fR
+makes rev work even on mingw.
 .IP "D" 4
 .IX Item "D"
 Leandro Lucarella has written a D language binding (\fIev.d\fR) for libev, to
 be found at <http://proj.llucax.com.ar/wiki/evd>.
+.IP "Ocaml" 4
+.IX Item "Ocaml"
+Erkki Seppala has written Ocaml bindings for libev, to be found at
+<http://modeemi.cs.tut.fi/~flux/software/ocaml\-ev/>.
 .SH "MACRO MAGIC"
 .IX Header "MACRO MAGIC"
 Libev can be compiled with a variety of options, the most fundamental
 of which is \f(CW\*(C`EV_MULTIPLICITY\*(C'\fR. This option determines whether (most)
 functions and callbacks have an initial \f(CW\*(C`struct ev_loop *\*(C'\fR argument.
 \&   #define EV_STANDALONE 1
 \&   #include "ev.h"
 .Ve
 .PP
 Both header files and implementation files can be compiled with a \*(C+
-compiler (at least, thats a stated goal, and breakage will be treated
+compiler (at least, that's a stated goal, and breakage will be treated
 as a bug).
 .PP
 You need the following files in your source tree, or in a directory
 in your include path (e.g. in libev/ when using \-Ilibev):
 .PP
 Must always be \f(CW1\fR if you do not use autoconf configuration, which
 keeps libev from including \fIconfig.h\fR, and it also defines dummy
 implementations for some libevent functions (such as logging, which is not
 supported). It will also not define any of the structs usually found in
 \&\fIevent.h\fR that are not directly supported by the libev core alone.
+.Sp
+In stanbdalone mode, libev will still try to automatically deduce the
+configuration, but has to be more conservative.
 .IP "\s-1EV_USE_MONOTONIC\s0" 4
 .IX Item "EV_USE_MONOTONIC"
 If defined to be \f(CW1\fR, libev will try to detect the availability of the
-monotonic clock option at both compile time and runtime. Otherwise no use
+monotonic clock option at both compile time and runtime. Otherwise no
-of the monotonic clock option will be attempted. If you enable this, you
+use of the monotonic clock option will be attempted. If you enable this,
-usually have to link against librt or something similar. Enabling it when
+you usually have to link against librt or something similar. Enabling it
-the functionality isn't available is safe, though, although you have
+when the functionality isn't available is safe, though, although you have
 to make sure you link against any libraries where the \f(CW\*(C`clock_gettime\*(C'\fR
-function is hiding in (often \fI\-lrt\fR).
+function is hiding in (often \fI\-lrt\fR). See also \f(CW\*(C`EV_USE_CLOCK_SYSCALL\*(C'\fR.
 .IP "\s-1EV_USE_REALTIME\s0" 4
 .IX Item "EV_USE_REALTIME"
 If defined to be \f(CW1\fR, libev will try to detect the availability of the
-real-time clock option at compile time (and assume its availability at
+real-time clock option at compile time (and assume its availability
-runtime if successful). Otherwise no use of the real-time clock option will
+at runtime if successful). Otherwise no use of the real-time clock
-be attempted. This effectively replaces \f(CW\*(C`gettimeofday\*(C'\fR by \f(CW\*(C`clock_get
+option will be attempted. This effectively replaces \f(CW\*(C`gettimeofday\*(C'\fR
-(CLOCK_REALTIME, ...)\*(C'\fR and will not normally affect correctness. See the
+by \f(CW\*(C`clock_get (CLOCK_REALTIME, ...)\*(C'\fR and will not normally affect
-note about libraries in the description of \f(CW\*(C`EV_USE_MONOTONIC\*(C'\fR, though.
+correctness. See the note about libraries in the description of
+\&\f(CW\*(C`EV_USE_MONOTONIC\*(C'\fR, though. Defaults to the opposite value of
+\&\f(CW\*(C`EV_USE_CLOCK_SYSCALL\*(C'\fR.
+.IP "\s-1EV_USE_CLOCK_SYSCALL\s0" 4
+.IX Item "EV_USE_CLOCK_SYSCALL"
+If defined to be \f(CW1\fR, libev will try to use a direct syscall instead
+of calling the system-provided \f(CW\*(C`clock_gettime\*(C'\fR function. This option
+exists because on GNU/Linux, \f(CW\*(C`clock_gettime\*(C'\fR is in \f(CW\*(C`librt\*(C'\fR, but \f(CW\*(C`librt\*(C'\fR
+unconditionally pulls in \f(CW\*(C`libpthread\*(C'\fR, slowing down single-threaded
+programs needlessly. Using a direct syscall is slightly slower (in
+theory), because no optimised vdso implementation can be used, but avoids
+the pthread dependency. Defaults to \f(CW1\fR on GNU/Linux with glibc 2.x or
+higher, as it simplifies linking (no need for \f(CW\*(C`\-lrt\*(C'\fR).
 .IP "\s-1EV_USE_NANOSLEEP\s0" 4
 .IX Item "EV_USE_NANOSLEEP"
 If defined to be \f(CW1\fR, libev will assume that \f(CW\*(C`nanosleep ()\*(C'\fR is available
 and will use it for delays. Otherwise it will use \f(CW\*(C`select ()\*(C'\fR.
 .IP "\s-1EV_USE_EVENTFD\s0" 4
 will not be compiled in.
 .IP "\s-1EV_SELECT_USE_FD_SET\s0" 4
 .IX Item "EV_SELECT_USE_FD_SET"
 If defined to \f(CW1\fR, then the select backend will use the system \f(CW\*(C`fd_set\*(C'\fR
 structure. This is useful if libev doesn't compile due to a missing
-\&\f(CW\*(C`NFDBITS\*(C'\fR or \f(CW\*(C`fd_mask\*(C'\fR definition or it mis-guesses the bitset layout on
+\&\f(CW\*(C`NFDBITS\*(C'\fR or \f(CW\*(C`fd_mask\*(C'\fR definition or it mis-guesses the bitset layout
-exotic systems. This usually limits the range of file descriptors to some
+on exotic systems. This usually limits the range of file descriptors to
-low limit such as 1024 or might have other limitations (winsocket only
+some low limit such as 1024 or might have other limitations (winsocket
-allows 64 sockets). The \f(CW\*(C`FD_SETSIZE\*(C'\fR macro, set before compilation, might
+only allows 64 sockets). The \f(CW\*(C`FD_SETSIZE\*(C'\fR macro, set before compilation,
-influence the size of the \f(CW\*(C`fd_set\*(C'\fR used.
+configures the maximum size of the \f(CW\*(C`fd_set\*(C'\fR.
 .IP "\s-1EV_SELECT_IS_WINSOCKET\s0" 4
 .IX Item "EV_SELECT_IS_WINSOCKET"
 When defined to \f(CW1\fR, the select backend will assume that
 select/socket/connect etc. don't understand file descriptors but
 wants osf handles on win32 (this is the case when the select to
 .PP
 .Vb 2
 \&   #include "ev_cpp.h"
 \&   #include "ev.c"
 .Ve
-.SH "THREADS AND COROUTINES"
+.SH "INTERACTION WITH OTHER PROGRAMS OR LIBRARIES"
+.IX Header "INTERACTION WITH OTHER PROGRAMS OR LIBRARIES"
+.Sh "\s-1THREADS\s0 \s-1AND\s0 \s-1COROUTINES\s0"
-.IX Header "THREADS AND COROUTINES"
+.IX Subsection "THREADS AND COROUTINES"
-.Sh "\s-1THREADS\s0"
+\fI\s-1THREADS\s0\fR
 .IX Subsection "THREADS"
+.PP
 All libev functions are reentrant and thread-safe unless explicitly
-documented otherwise, but it uses no locking itself. This means that you
+documented otherwise, but libev implements no locking itself. This means
-can use as many loops as you want in parallel, as long as there are no
+that you can use as many loops as you want in parallel, as long as there
-concurrent calls into any libev function with the same loop parameter
+are no concurrent calls into any libev function with the same loop
-(\f(CW\*(C`ev_default_*\*(C'\fR calls have an implicit default loop parameter, of
+parameter (\f(CW\*(C`ev_default_*\*(C'\fR calls have an implicit default loop parameter,
-course): libev guarantees that different event loops share no data
+of course): libev guarantees that different event loops share no data
 structures that need any locking.
 .PP
 Or to put it differently: calls with different loop parameters can be done
 concurrently from multiple threads, calls with the same loop parameter
 must be done serially (but can be done from different threads, as long as
 .Sp
 An example use would be to communicate signals or other events that only
 work in the default loop by registering the signal watcher with the
 default loop and triggering an \f(CW\*(C`ev_async\*(C'\fR watcher from the default loop
 watcher callback into the event loop interested in the signal.
-.Sh "\s-1COROUTINES\s0"
+.PP
+\fI\s-1COROUTINES\s0\fR
 .IX Subsection "COROUTINES"
+.PP
-Libev is much more accommodating to coroutines (\*(L"cooperative threads\*(R"):
+Libev is very accommodating to coroutines (\*(L"cooperative threads\*(R"):
-libev fully supports nesting calls to it's functions from different
+libev fully supports nesting calls to its functions from different
 coroutines (e.g. you can call \f(CW\*(C`ev_loop\*(C'\fR on the same loop from two
-different coroutines and switch freely between both coroutines running the
+different coroutines, and switch freely between both coroutines running the
 loop, as long as you don't confuse yourself). The only exception is that
 you must not do this from \f(CW\*(C`ev_periodic\*(C'\fR reschedule callbacks.
 .PP
 Care has been taken to ensure that libev does not keep local state inside
-\&\f(CW\*(C`ev_loop\*(C'\fR, and other calls do not usually allow coroutine switches.
+\&\f(CW\*(C`ev_loop\*(C'\fR, and other calls do not usually allow for coroutine switches as
+they do not call any callbacks.
+.Sh "\s-1COMPILER\s0 \s-1WARNINGS\s0"
+.IX Subsection "COMPILER WARNINGS"
+Depending on your compiler and compiler settings, you might get no or a
+lot of warnings when compiling libev code. Some people are apparently
+scared by this.
+.PP
+However, these are unavoidable for many reasons. For one, each compiler
+has different warnings, and each user has different tastes regarding
+warning options. \*(L"Warn-free\*(R" code therefore cannot be a goal except when
+targeting a specific compiler and compiler-version.
+.PP
+Another reason is that some compiler warnings require elaborate
+workarounds, or other changes to the code that make it less clear and less
+maintainable.
+.PP
+And of course, some compiler warnings are just plain stupid, or simply
+wrong (because they don't actually warn about the condition their message
+seems to warn about). For example, certain older gcc versions had some
+warnings that resulted an extreme number of false positives. These have
+been fixed, but some people still insist on making code warn-free with
+such buggy versions.
+.PP
+While libev is written to generate as few warnings as possible,
+\&\*(L"warn-free\*(R" code is not a goal, and it is recommended not to build libev
+with any compiler warnings enabled unless you are prepared to cope with
+them (e.g. by ignoring them). Remember that warnings are just that:
+warnings, not errors, or proof of bugs.
+.Sh "\s-1VALGRIND\s0"
+.IX Subsection "VALGRIND"
+Valgrind has a special section here because it is a popular tool that is
+highly useful. Unfortunately, valgrind reports are very hard to interpret.
+.PP
+If you think you found a bug (memory leak, uninitialised data access etc.)
+in libev, then check twice: If valgrind reports something like:
+.PP
+.Vb 3
+\&   ==2274==    definitely lost: 0 bytes in 0 blocks.
+\&   ==2274==      possibly lost: 0 bytes in 0 blocks.
+\&   ==2274==    still reachable: 256 bytes in 1 blocks.
+.Ve
+.PP
+Then there is no memory leak, just as memory accounted to global variables
+is not a memleak \- the memory is still being referenced, and didn't leak.
+.PP
+Similarly, under some circumstances, valgrind might report kernel bugs
+as if it were a bug in libev (e.g. in realloc or in the poll backend,
+although an acceptable workaround has been found here), or it might be
+confused.
+.PP
+Keep in mind that valgrind is a very good tool, but only a tool. Don't
+make it into some kind of religion.
+.PP
+If you are unsure about something, feel free to contact the mailing list
+with the full valgrind report and an explanation on why you think this
+is a bug in libev (best check the archives, too :). However, don't be
+annoyed when you get a brisk \*(L"this is no bug\*(R" answer and take the chance
+of learning how to interpret valgrind properly.
+.PP
+If you need, for some reason, empty reports from valgrind for your project
+I suggest using suppression lists.
+.SH "PORTABILITY NOTES"
+.IX Header "PORTABILITY NOTES"
+.Sh "\s-1WIN32\s0 \s-1PLATFORM\s0 \s-1LIMITATIONS\s0 \s-1AND\s0 \s-1WORKAROUNDS\s0"
+.IX Subsection "WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS"
+Win32 doesn't support any of the standards (e.g. \s-1POSIX\s0) that libev
+requires, and its I/O model is fundamentally incompatible with the \s-1POSIX\s0
+model. Libev still offers limited functionality on this platform in
+the form of the \f(CW\*(C`EVBACKEND_SELECT\*(C'\fR backend, and only supports socket
+descriptors. This only applies when using Win32 natively, not when using
+e.g. cygwin.
+.PP
+Lifting these limitations would basically require the full
+re-implementation of the I/O system. If you are into these kinds of
+things, then note that glib does exactly that for you in a very portable
+way (note also that glib is the slowest event library known to man).
+.PP
+There is no supported compilation method available on windows except
+embedding it into other applications.
+.PP
+Not a libev limitation but worth mentioning: windows apparently doesn't
+accept large writes: instead of resulting in a partial write, windows will
+either accept everything or return \f(CW\*(C`ENOBUFS\*(C'\fR if the buffer is too large,
+so make sure you only write small amounts into your sockets (less than a
+megabyte seems safe, but this apparently depends on the amount of memory
+available).
+.PP
+Due to the many, low, and arbitrary limits on the win32 platform and
+the abysmal performance of winsockets, using a large number of sockets
+is not recommended (and not reasonable). If your program needs to use
+more than a hundred or so sockets, then likely it needs to use a totally
+different implementation for windows, as libev offers the \s-1POSIX\s0 readiness
+notification model, which cannot be implemented efficiently on windows
+(Microsoft monopoly games).
+.PP
+A typical way to use libev under windows is to embed it (see the embedding
+section for details) and use the following \fIevwrap.h\fR header file instead
+of \fIev.h\fR:
+.PP
+.Vb 2
+\&   #define EV_STANDALONE              /* keeps ev from requiring config.h */
+\&   #define EV_SELECT_IS_WINSOCKET 1   /* configure libev for windows select */
+\&
+\&   #include "ev.h"
+.Ve
+.PP
+And compile the following \fIevwrap.c\fR file into your project (make sure
+you do \fInot\fR compile the \fIev.c\fR or any other embedded source files!):
+.PP
+.Vb 2
+\&   #include "evwrap.h"
+\&   #include "ev.c"
+.Ve
+.IP "The winsocket select function" 4
+.IX Item "The winsocket select function"
+The winsocket \f(CW\*(C`select\*(C'\fR function doesn't follow \s-1POSIX\s0 in that it
+requires socket \fIhandles\fR and not socket \fIfile descriptors\fR (it is
+also extremely buggy). This makes select very inefficient, and also
+requires a mapping from file descriptors to socket handles (the Microsoft
+C runtime provides the function \f(CW\*(C`_open_osfhandle\*(C'\fR for this). See the
+discussion of the \f(CW\*(C`EV_SELECT_USE_FD_SET\*(C'\fR, \f(CW\*(C`EV_SELECT_IS_WINSOCKET\*(C'\fR and
+\&\f(CW\*(C`EV_FD_TO_WIN32_HANDLE\*(C'\fR preprocessor symbols for more info.
+.Sp
+The configuration for a \*(L"naked\*(R" win32 using the Microsoft runtime
+libraries and raw winsocket select is:
+.Sp
+.Vb 2
+\&   #define EV_USE_SELECT 1
+\&   #define EV_SELECT_IS_WINSOCKET 1   /* forces EV_SELECT_USE_FD_SET, too */
+.Ve
+.Sp
+Note that winsockets handling of fd sets is O(n), so you can easily get a
+complexity in the O(nA\*^X) range when using win32.
+.IP "Limited number of file descriptors" 4
+.IX Item "Limited number of file descriptors"
+Windows has numerous arbitrary (and low) limits on things.
+.Sp
+Early versions of winsocket's select only supported waiting for a maximum
+of \f(CW64\fR handles (probably owning to the fact that all windows kernels
+can only wait for \f(CW64\fR things at the same time internally; Microsoft
+recommends spawning a chain of threads and wait for 63 handles and the
+previous thread in each. Great).
+.Sp
+Newer versions support more handles, but you need to define \f(CW\*(C`FD_SETSIZE\*(C'\fR
+to some high number (e.g. \f(CW2048\fR) before compiling the winsocket select
+call (which might be in libev or elsewhere, for example, perl does its own
+select emulation on windows).
+.Sp
+Another limit is the number of file descriptors in the Microsoft runtime
+libraries, which by default is \f(CW64\fR (there must be a hidden \fI64\fR fetish
+or something like this inside Microsoft). You can increase this by calling
+\&\f(CW\*(C`_setmaxstdio\*(C'\fR, which can increase this limit to \f(CW2048\fR (another
+arbitrary limit), but is broken in many versions of the Microsoft runtime
+libraries.
+.Sp
+This might get you to about \f(CW512\fR or \f(CW2048\fR sockets (depending on
+windows version and/or the phase of the moon). To get more, you need to
+wrap all I/O functions and provide your own fd management, but the cost of
+calling select (O(nA\*^X)) will likely make this unworkable.
+.Sh "\s-1PORTABILITY\s0 \s-1REQUIREMENTS\s0"
+.IX Subsection "PORTABILITY REQUIREMENTS"
+In addition to a working ISO-C implementation and of course the
+backend-specific APIs, libev relies on a few additional extensions:
+.ie n .IP """void (*)(ev_watcher_type *, int revents)""\fR must have compatible calling conventions regardless of \f(CW""ev_watcher_type *""." 4
+.el .IP "\f(CWvoid (*)(ev_watcher_type *, int revents)\fR must have compatible calling conventions regardless of \f(CWev_watcher_type *\fR." 4
+.IX Item "void (*)(ev_watcher_type *, int revents) must have compatible calling conventions regardless of ev_watcher_type *."
+Libev assumes not only that all watcher pointers have the same internal
+structure (guaranteed by \s-1POSIX\s0 but not by \s-1ISO\s0 C for example), but it also
+assumes that the same (machine) code can be used to call any watcher
+callback: The watcher callbacks have different type signatures, but libev
+calls them using an \f(CW\*(C`ev_watcher *\*(C'\fR internally.
+.ie n .IP """sig_atomic_t volatile"" must be thread-atomic as well" 4
+.el .IP "\f(CWsig_atomic_t volatile\fR must be thread-atomic as well" 4
+.IX Item "sig_atomic_t volatile must be thread-atomic as well"
+The type \f(CW\*(C`sig_atomic_t volatile\*(C'\fR (or whatever is defined as
+\&\f(CW\*(C`EV_ATOMIC_T\*(C'\fR) must be atomic with respect to accesses from different
+threads. This is not part of the specification for \f(CW\*(C`sig_atomic_t\*(C'\fR, but is
+believed to be sufficiently portable.
+.ie n .IP """sigprocmask"" must work in a threaded environment" 4
+.el .IP "\f(CWsigprocmask\fR must work in a threaded environment" 4
+.IX Item "sigprocmask must work in a threaded environment"
+Libev uses \f(CW\*(C`sigprocmask\*(C'\fR to temporarily block signals. This is not
+allowed in a threaded program (\f(CW\*(C`pthread_sigmask\*(C'\fR has to be used). Typical
+pthread implementations will either allow \f(CW\*(C`sigprocmask\*(C'\fR in the \*(L"main
+thread\*(R" or will block signals process-wide, both behaviours would
+be compatible with libev. Interaction between \f(CW\*(C`sigprocmask\*(C'\fR and
+\&\f(CW\*(C`pthread_sigmask\*(C'\fR could complicate things, however.
+.Sp
+The most portable way to handle signals is to block signals in all threads
+except the initial one, and run the default loop in the initial thread as
+well.
+.ie n .IP """long"" must be large enough for common memory allocation sizes" 4
+.el .IP "\f(CWlong\fR must be large enough for common memory allocation sizes" 4
+.IX Item "long must be large enough for common memory allocation sizes"
+To improve portability and simplify its \s-1API\s0, libev uses \f(CW\*(C`long\*(C'\fR internally
+instead of \f(CW\*(C`size_t\*(C'\fR when allocating its data structures. On non-POSIX
+systems (Microsoft...) this might be unexpectedly low, but is still at
+least 31 bits everywhere, which is enough for hundreds of millions of
+watchers.
+.ie n .IP """double"" must hold a time value in seconds with enough accuracy" 4
+.el .IP "\f(CWdouble\fR must hold a time value in seconds with enough accuracy" 4
+.IX Item "double must hold a time value in seconds with enough accuracy"
+The type \f(CW\*(C`double\*(C'\fR is used to represent timestamps. It is required to
+have at least 51 bits of mantissa (and 9 bits of exponent), which is good
+enough for at least into the year 4000. This requirement is fulfilled by
+implementations implementing \s-1IEEE\s0 754 (basically all existing ones).
+.PP
+If you know of other additional requirements drop me a note.
-.SH "COMPLEXITIES"
+.SH "ALGORITHMIC COMPLEXITIES"
-.IX Header "COMPLEXITIES"
+.IX Header "ALGORITHMIC COMPLEXITIES"
 In this section the complexities of (many of) the algorithms used inside
-libev will be explained. For complexity discussions about backends see the
+libev will be documented. For complexity discussions about backends see
-documentation for \f(CW\*(C`ev_default_init\*(C'\fR.
+the documentation for \f(CW\*(C`ev_default_init\*(C'\fR.
 .PP
 All of the following are about amortised time: If an array needs to be
 extended, libev needs to realloc and move the whole array, but this
-happens asymptotically never with higher number of elements, so O(1) might
+happens asymptotically rarer with higher number of elements, so O(1) might
-mean it might do a lengthy realloc operation in rare cases, but on average
+mean that libev does a lengthy realloc operation in rare cases, but on
-it is much faster and asymptotically approaches constant time.
+average it is much faster and asymptotically approaches constant time.
 .IP "Starting and stopping timer/periodic watchers: O(log skipped_other_timers)" 4
 .IX Item "Starting and stopping timer/periodic watchers: O(log skipped_other_timers)"
 This means that, when you have a watcher that triggers in one hour and
-there are 100 watchers that would trigger before that then inserting will
+there are 100 watchers that would trigger before that, then inserting will
 have to skip roughly seven (\f(CW\*(C`ld 100\*(C'\fR) of these watchers.
 .IP "Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)" 4
 .IX Item "Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)"
-That means that changing a timer costs less than removing/adding them
+That means that changing a timer costs less than removing/adding them,
 as only the relative motion in the event queue has to be paid for.
 .IP "Starting io/check/prepare/idle/signal/child/fork/async watchers: O(1)" 4
 .IX Item "Starting io/check/prepare/idle/signal/child/fork/async watchers: O(1)"
 These just add the watcher into an array or at the head of a list.
 .IP "Stopping check/prepare/idle/fork/async watchers: O(1)" 4
 .IX Item "Stopping check/prepare/idle/fork/async watchers: O(1)"
 .PD 0
 .IP "Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % \s-1EV_PID_HASHSIZE\s0))" 4
 .IX Item "Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))"
 .PD
-These watchers are stored in lists then need to be walked to find the
+These watchers are stored in lists, so they need to be walked to find the
 correct watcher to remove. The lists are usually short (you don't usually
-have many watchers waiting for the same fd or signal).
+have many watchers waiting for the same fd or signal: one is typical, two
+is rare).
 .IP "Finding the next timer in each loop iteration: O(1)" 4
 .IX Item "Finding the next timer in each loop iteration: O(1)"
 By virtue of using a binary or 4\-heap, the next timer is always found at a
 fixed position in the storage array.
 .IP "Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)" 4
 .IX Item "Processing signals: O(max_signal_number)"
 .PD
 Sending involves a system call \fIiff\fR there were no other \f(CW\*(C`ev_async_send\*(C'\fR
 calls in the current loop iteration. Checking for async and signal events
 involves iterating over all running async watchers or all signal numbers.
-.SH "WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS"
-.IX Header "WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS"
-Win32 doesn't support any of the standards (e.g. \s-1POSIX\s0) that libev
-requires, and its I/O model is fundamentally incompatible with the \s-1POSIX\s0
-model. Libev still offers limited functionality on this platform in
-the form of the \f(CW\*(C`EVBACKEND_SELECT\*(C'\fR backend, and only supports socket
-descriptors. This only applies when using Win32 natively, not when using
-e.g. cygwin.
-.PP
-Lifting these limitations would basically require the full
-re-implementation of the I/O system. If you are into these kinds of
-things, then note that glib does exactly that for you in a very portable
-way (note also that glib is the slowest event library known to man).
-.PP
-There is no supported compilation method available on windows except
-embedding it into other applications.
-.PP
-Not a libev limitation but worth mentioning: windows apparently doesn't
-accept large writes: instead of resulting in a partial write, windows will
-either accept everything or return \f(CW\*(C`ENOBUFS\*(C'\fR if the buffer is too large,
-so make sure you only write small amounts into your sockets (less than a
-megabyte seems safe, but this apparently depends on the amount of memory
-available).
-.PP
-Due to the many, low, and arbitrary limits on the win32 platform and
-the abysmal performance of winsockets, using a large number of sockets
-is not recommended (and not reasonable). If your program needs to use
-more than a hundred or so sockets, then likely it needs to use a totally
-different implementation for windows, as libev offers the \s-1POSIX\s0 readiness
-notification model, which cannot be implemented efficiently on windows
-(Microsoft monopoly games).
-.PP
-A typical way to use libev under windows is to embed it (see the embedding
-section for details) and use the following \fIevwrap.h\fR header file instead
-of \fIev.h\fR:
-.PP
-.Vb 2
-\&   #define EV_STANDALONE              /* keeps ev from requiring config.h */
-\&   #define EV_SELECT_IS_WINSOCKET 1   /* configure libev for windows select */
-\&
-\&   #include "ev.h"
-.Ve
-.PP
-And compile the following \fIevwrap.c\fR file into your project (make sure
-you do \fInot\fR compile the \fIev.c\fR or any other embedded source files!):
-.PP
-.Vb 2
-\&   #include "evwrap.h"
-\&   #include "ev.c"
-.Ve
-.IP "The winsocket select function" 4
-.IX Item "The winsocket select function"
-The winsocket \f(CW\*(C`select\*(C'\fR function doesn't follow \s-1POSIX\s0 in that it
-requires socket \fIhandles\fR and not socket \fIfile descriptors\fR (it is
-also extremely buggy). This makes select very inefficient, and also
-requires a mapping from file descriptors to socket handles (the Microsoft
-C runtime provides the function \f(CW\*(C`_open_osfhandle\*(C'\fR for this). See the
-discussion of the \f(CW\*(C`EV_SELECT_USE_FD_SET\*(C'\fR, \f(CW\*(C`EV_SELECT_IS_WINSOCKET\*(C'\fR and
-\&\f(CW\*(C`EV_FD_TO_WIN32_HANDLE\*(C'\fR preprocessor symbols for more info.
-.Sp
-The configuration for a \*(L"naked\*(R" win32 using the Microsoft runtime
-libraries and raw winsocket select is:
-.Sp
-.Vb 2
-\&   #define EV_USE_SELECT 1
-\&   #define EV_SELECT_IS_WINSOCKET 1   /* forces EV_SELECT_USE_FD_SET, too */
-.Ve
-.Sp
-Note that winsockets handling of fd sets is O(n), so you can easily get a
-complexity in the O(nA\*^X) range when using win32.
-.IP "Limited number of file descriptors" 4
-.IX Item "Limited number of file descriptors"
-Windows has numerous arbitrary (and low) limits on things.
-.Sp
-Early versions of winsocket's select only supported waiting for a maximum
-of \f(CW64\fR handles (probably owning to the fact that all windows kernels
-can only wait for \f(CW64\fR things at the same time internally; Microsoft
-recommends spawning a chain of threads and wait for 63 handles and the
-previous thread in each. Great).
-.Sp
-Newer versions support more handles, but you need to define \f(CW\*(C`FD_SETSIZE\*(C'\fR
-to some high number (e.g. \f(CW2048\fR) before compiling the winsocket select
-call (which might be in libev or elsewhere, for example, perl does its own
-select emulation on windows).
-.Sp
-Another limit is the number of file descriptors in the Microsoft runtime
-libraries, which by default is \f(CW64\fR (there must be a hidden \fI64\fR fetish
-or something like this inside Microsoft). You can increase this by calling
-\&\f(CW\*(C`_setmaxstdio\*(C'\fR, which can increase this limit to \f(CW2048\fR (another
-arbitrary limit), but is broken in many versions of the Microsoft runtime
-libraries.
-.Sp
-This might get you to about \f(CW512\fR or \f(CW2048\fR sockets (depending on
-windows version and/or the phase of the moon). To get more, you need to
-wrap all I/O functions and provide your own fd management, but the cost of
-calling select (O(nA\*^X)) will likely make this unworkable.
-.SH "PORTABILITY REQUIREMENTS"
-.IX Header "PORTABILITY REQUIREMENTS"
-In addition to a working ISO-C implementation, libev relies on a few
-additional extensions:
-.ie n .IP """void (*)(ev_watcher_type *, int revents)""\fR must have compatible calling conventions regardless of \f(CW""ev_watcher_type *""." 4
-.el .IP "\f(CWvoid (*)(ev_watcher_type *, int revents)\fR must have compatible calling conventions regardless of \f(CWev_watcher_type *\fR." 4
-.IX Item "void (*)(ev_watcher_type *, int revents) must have compatible calling conventions regardless of ev_watcher_type *."
-Libev assumes not only that all watcher pointers have the same internal
-structure (guaranteed by \s-1POSIX\s0 but not by \s-1ISO\s0 C for example), but it also
-assumes that the same (machine) code can be used to call any watcher
-callback: The watcher callbacks have different type signatures, but libev
-calls them using an \f(CW\*(C`ev_watcher *\*(C'\fR internally.
-.ie n .IP """sig_atomic_t volatile"" must be thread-atomic as well" 4
-.el .IP "\f(CWsig_atomic_t volatile\fR must be thread-atomic as well" 4
-.IX Item "sig_atomic_t volatile must be thread-atomic as well"
-The type \f(CW\*(C`sig_atomic_t volatile\*(C'\fR (or whatever is defined as
-\&\f(CW\*(C`EV_ATOMIC_T\*(C'\fR) must be atomic with respect to accesses from different
-threads. This is not part of the specification for \f(CW\*(C`sig_atomic_t\*(C'\fR, but is
-believed to be sufficiently portable.
-.ie n .IP """sigprocmask"" must work in a threaded environment" 4
-.el .IP "\f(CWsigprocmask\fR must work in a threaded environment" 4
-.IX Item "sigprocmask must work in a threaded environment"
-Libev uses \f(CW\*(C`sigprocmask\*(C'\fR to temporarily block signals. This is not
-allowed in a threaded program (\f(CW\*(C`pthread_sigmask\*(C'\fR has to be used). Typical
-pthread implementations will either allow \f(CW\*(C`sigprocmask\*(C'\fR in the \*(L"main
-thread\*(R" or will block signals process-wide, both behaviours would
-be compatible with libev. Interaction between \f(CW\*(C`sigprocmask\*(C'\fR and
-\&\f(CW\*(C`pthread_sigmask\*(C'\fR could complicate things, however.
-.Sp
-The most portable way to handle signals is to block signals in all threads
-except the initial one, and run the default loop in the initial thread as
-well.
-.ie n .IP """long"" must be large enough for common memory allocation sizes" 4
-.el .IP "\f(CWlong\fR must be large enough for common memory allocation sizes" 4
-.IX Item "long must be large enough for common memory allocation sizes"
-To improve portability and simplify using libev, libev uses \f(CW\*(C`long\*(C'\fR
-internally instead of \f(CW\*(C`size_t\*(C'\fR when allocating its data structures. On
-non-POSIX systems (Microsoft...) this might be unexpectedly low, but
-is still at least 31 bits everywhere, which is enough for hundreds of
-millions of watchers.
-.ie n .IP """double"" must hold a time value in seconds with enough accuracy" 4
-.el .IP "\f(CWdouble\fR must hold a time value in seconds with enough accuracy" 4
-.IX Item "double must hold a time value in seconds with enough accuracy"
-The type \f(CW\*(C`double\*(C'\fR is used to represent timestamps. It is required to
-have at least 51 bits of mantissa (and 9 bits of exponent), which is good
-enough for at least into the year 4000. This requirement is fulfilled by
-implementations implementing \s-1IEEE\s0 754 (basically all existing ones).
-.PP
-If you know of other additional requirements drop me a note.
-.SH "COMPILER WARNINGS"
-.IX Header "COMPILER WARNINGS"
-Depending on your compiler and compiler settings, you might get no or a
-lot of warnings when compiling libev code. Some people are apparently
-scared by this.
-.PP
-However, these are unavoidable for many reasons. For one, each compiler
-has different warnings, and each user has different tastes regarding
-warning options. \*(L"Warn-free\*(R" code therefore cannot be a goal except when
-targeting a specific compiler and compiler-version.
-.PP
-Another reason is that some compiler warnings require elaborate
-workarounds, or other changes to the code that make it less clear and less
-maintainable.
-.PP
-And of course, some compiler warnings are just plain stupid, or simply
-wrong (because they don't actually warn about the condition their message
-seems to warn about).
-.PP
-While libev is written to generate as few warnings as possible,
-\&\*(L"warn-free\*(R" code is not a goal, and it is recommended not to build libev
-with any compiler warnings enabled unless you are prepared to cope with
-them (e.g. by ignoring them). Remember that warnings are just that:
-warnings, not errors, or proof of bugs.
-.SH "VALGRIND"
-.IX Header "VALGRIND"
-Valgrind has a special section here because it is a popular tool that is
-highly useful, but valgrind reports are very hard to interpret.
-.PP
-If you think you found a bug (memory leak, uninitialised data access etc.)
-in libev, then check twice: If valgrind reports something like:
-.PP
-.Vb 3
-\&   ==2274==    definitely lost: 0 bytes in 0 blocks.
-\&   ==2274==      possibly lost: 0 bytes in 0 blocks.
-\&   ==2274==    still reachable: 256 bytes in 1 blocks.
-.Ve
-.PP
-Then there is no memory leak. Similarly, under some circumstances,
-valgrind might report kernel bugs as if it were a bug in libev, or it
-might be confused (it is a very good tool, but only a tool).
-.PP
-If you are unsure about something, feel free to contact the mailing list
-with the full valgrind report and an explanation on why you think this is
-a bug in libev. However, don't be annoyed when you get a brisk \*(L"this is
-no bug\*(R" answer and take the chance of learning how to interpret valgrind
-properly.
-.PP
-If you need, for some reason, empty reports from valgrind for your project
-I suggest using suppression lists.
 .SH "AUTHOR"
 .IX Header "AUTHOR"
-Marc Lehmann <libev@schmorp.de>.
+Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael Magnusson.

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing libev/ev.3 (file contents): Revision 1.71 by root, Mon Sep 29 03:31:14 2008 UTC vs. Revision 1.77 by root, Sun Feb 15 01:44:40 2009 UTC

Diff Legend

Comparing libev/ev.3 (file contents):
Revision 1.71 by root, Mon Sep 29 03:31:14 2008 UTC vs.
Revision 1.77 by root, Sun Feb 15 01:44:40 2009 UTC