ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.105 by root, Sun Dec 23 03:50:10 2007 UTC vs.
Revision 1.451 by root, Mon Jun 24 00:19:26 2019 UTC

		1	=encoding utf-8
		2
1	=head1 NAME	3	=head1 NAME
2		4
3	libev - a high performance full-featured event loop written in C	5	libev - a high performance full-featured event loop written in C
4		6
5	=head1 SYNOPSIS	7	=head1 SYNOPSIS
6		8
7	#include <ev.h>	9	#include <ev.h>
8		10
9	=head2 EXAMPLE PROGRAM	11	=head2 EXAMPLE PROGRAM
10		12
		13	// a single header file is required
11	#include <ev.h>	14	#include <ev.h>
12		15
		16	#include <stdio.h> // for puts
		17
		18	// every watcher type has its own typedef'd struct
		19	// with the name ev_TYPE
13	ev_io stdin_watcher;	20	ev_io stdin_watcher;
14	ev_timer timeout_watcher;	21	ev_timer timeout_watcher;
15		22
16	/* called when data readable on stdin */	23	// all watcher callbacks have a similar signature
		24	// this callback is called when data is readable on stdin
17	static void	25	static void
18	stdin_cb (EV_P_ struct ev_io *w, int revents)	26	stdin_cb (EV_P_ ev_io *w, int revents)
19	{	27	{
20	/* puts ("stdin ready"); */	28	puts ("stdin ready");
21	ev_io_stop (EV_A_ w); /* just a syntax example */	29	// for one-shot events, one must manually stop the watcher
22	ev_unloop (EV_A_ EVUNLOOP_ALL); /* leave all loop calls */	30	// with its corresponding stop function.
		31	ev_io_stop (EV_A_ w);
		32
		33	// this causes all nested ev_run's to stop iterating
		34	ev_break (EV_A_ EVBREAK_ALL);
23	}	35	}
24		36
		37	// another callback, this time for a time-out
25	static void	38	static void
26	timeout_cb (EV_P_ struct ev_timer *w, int revents)	39	timeout_cb (EV_P_ ev_timer *w, int revents)
27	{	40	{
28	/* puts ("timeout"); */	41	puts ("timeout");
29	ev_unloop (EV_A_ EVUNLOOP_ONE); /* leave one loop call */	42	// this causes the innermost ev_run to stop iterating
		43	ev_break (EV_A_ EVBREAK_ONE);
30	}	44	}
31		45
32	int	46	int
33	main (void)	47	main (void)
34	{	48	{
35	struct ev_loop *loop = ev_default_loop (0);	49	// use the default event loop unless you have special needs
		50	struct ev_loop *loop = EV_DEFAULT;
36		51
37	/* initialise an io watcher, then start it */	52	// initialise an io watcher, then start it
		53	// this one will watch for stdin to become readable
38	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	54	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
39	ev_io_start (loop, &stdin_watcher);	55	ev_io_start (loop, &stdin_watcher);
40		56
		57	// initialise a timer watcher, then start it
41	/* simple non-repeating 5.5 second timeout */	58	// simple non-repeating 5.5 second timeout
42	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	59	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
43	ev_timer_start (loop, &timeout_watcher);	60	ev_timer_start (loop, &timeout_watcher);
44		61
45	/* loop till timeout or data ready */	62	// now wait for events to arrive
46	ev_loop (loop, 0);	63	ev_run (loop, 0);
47		64
		65	// break was called, so exit
48	return 0;	66	return 0;
49	}	67	}
50		68
51	=head1 DESCRIPTION	69	=head1 ABOUT THIS DOCUMENT
52		70
		71	This document documents the libev software package.
		72
53	The newest version of this document is also available as a html-formatted	73	The newest version of this document is also available as an html-formatted
54	web page you might find easier to navigate when reading it for the first	74	web page you might find easier to navigate when reading it for the first
55	time: L<http://cvs.schmorp.de/libev/ev.html>.	75	time: L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.
		76
		77	While this document tries to be as complete as possible in documenting
		78	libev, its usage and the rationale behind its design, it is not a tutorial
		79	on event-based programming, nor will it introduce event-based programming
		80	with libev.
		81
		82	Familiarity with event based programming techniques in general is assumed
		83	throughout this document.
		84
		85	=head1 WHAT TO READ WHEN IN A HURRY
		86
		87	This manual tries to be very detailed, but unfortunately, this also makes
		88	it very long. If you just want to know the basics of libev, I suggest
		89	reading L</ANATOMY OF A WATCHER>, then the L</EXAMPLE PROGRAM> above and
		90	look up the missing functions in L</GLOBAL FUNCTIONS> and the C<ev_io> and
		91	C<ev_timer> sections in L</WATCHER TYPES>.
		92
		93	=head1 ABOUT LIBEV
56		94
57	Libev is an event loop: you register interest in certain events (such as a	95	Libev is an event loop: you register interest in certain events (such as a
58	file descriptor being readable or a timeout occurring), and it will manage	96	file descriptor being readable or a timeout occurring), and it will manage
59	these event sources and provide your program with events.	97	these event sources and provide your program with events.
60		98
…		…
67	details of the event, and then hand it over to libev by I<starting> the	105	details of the event, and then hand it over to libev by I<starting> the
68	watcher.	106	watcher.
69		107
70	=head2 FEATURES	108	=head2 FEATURES
71		109
72	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	110	Libev supports C<select>, C<poll>, the Linux-specific aio and C<epoll>
73	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	111	interfaces, the BSD-specific C<kqueue> and the Solaris-specific event port
74	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	112	mechanisms for file descriptor events (C<ev_io>), the Linux C<inotify>
75	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers	113	interface (for C<ev_stat>), Linux eventfd/signalfd (for faster and cleaner
76	with customised rescheduling (C<ev_periodic>), synchronous signals	114	inter-thread wakeup (C<ev_async>)/signal handling (C<ev_signal>)) relative
77	(C<ev_signal>), process status change events (C<ev_child>), and event	115	timers (C<ev_timer>), absolute timers with customised rescheduling
78	watchers dealing with the event loop mechanism itself (C<ev_idle>,	116	(C<ev_periodic>), synchronous signals (C<ev_signal>), process status
79	C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as	117	change events (C<ev_child>), and event watchers dealing with the event
80	file watchers (C<ev_stat>) and even limited support for fork events	118	loop mechanism itself (C<ev_idle>, C<ev_embed>, C<ev_prepare> and
81	(C<ev_fork>).	119	C<ev_check> watchers) as well as file watchers (C<ev_stat>) and even
		120	limited support for fork events (C<ev_fork>).
82		121
83	It also is quite fast (see this	122	It also is quite fast (see this
84	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent	123	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
85	for example).	124	for example).
86		125
87	=head2 CONVENTIONS	126	=head2 CONVENTIONS
88		127
89	Libev is very configurable. In this manual the default configuration will	128	Libev is very configurable. In this manual the default (and most common)
90	be described, which supports multiple event loops. For more info about	129	configuration will be described, which supports multiple event loops. For
91	various configuration options please have a look at B<EMBED> section in	130	more info about various configuration options please have a look at
92	this manual. If libev was configured without support for multiple event	131	B<EMBED> section in this manual. If libev was configured without support
93	loops, then all functions taking an initial argument of name C<loop>	132	for multiple event loops, then all functions taking an initial argument of
94	(which is always of type C<struct ev_loop *>) will not have this argument.	133	name C<loop> (which is always of type C<struct ev_loop *>) will not have
		134	this argument.
95		135
96	=head2 TIME REPRESENTATION	136	=head2 TIME REPRESENTATION
97		137
98	Libev represents time as a single floating point number, representing the	138	Libev represents time as a single floating point number, representing
99	(fractional) number of seconds since the (POSIX) epoch (somewhere near	139	the (fractional) number of seconds since the (POSIX) epoch (in practice
100	the beginning of 1970, details are complicated, don't ask). This type is	140	somewhere near the beginning of 1970, details are complicated, don't
101	called C<ev_tstamp>, which is what you should use too. It usually aliases	141	ask). This type is called C<ev_tstamp>, which is what you should use
102	to the C<double> type in C, and when you need to do any calculations on	142	too. It usually aliases to the C<double> type in C. When you need to do
103	it, you should treat it as some floatingpoint value. Unlike the name	143	any calculations on it, you should treat it as some floating point value.
		144
104	component C<stamp> might indicate, it is also used for time differences	145	Unlike the name component C<stamp> might indicate, it is also used for
105	throughout libev.	146	time differences (e.g. delays) throughout libev.
		147
		148	=head1 ERROR HANDLING
		149
		150	Libev knows three classes of errors: operating system errors, usage errors
		151	and internal errors (bugs).
		152
		153	When libev catches an operating system error it cannot handle (for example
		154	a system call indicating a condition libev cannot fix), it calls the callback
		155	set via C<ev_set_syserr_cb>, which is supposed to fix the problem or
		156	abort. The default is to print a diagnostic message and to call C<abort
		157	()>.
		158
		159	When libev detects a usage error such as a negative timer interval, then
		160	it will print a diagnostic message and abort (via the C<assert> mechanism,
		161	so C<NDEBUG> will disable this checking): these are programming errors in
		162	the libev caller and need to be fixed there.
		163
		164	Libev also has a few internal error-checking C<assert>ions, and also has
		165	extensive consistency checking code. These do not trigger under normal
		166	circumstances, as they indicate either a bug in libev or worse.
		167
106		168
107	=head1 GLOBAL FUNCTIONS	169	=head1 GLOBAL FUNCTIONS
108		170
109	These functions can be called anytime, even before initialising the	171	These functions can be called anytime, even before initialising the
110	library in any way.	172	library in any way.
…		…
113		175
114	=item ev_tstamp ev_time ()	176	=item ev_tstamp ev_time ()
115		177
116	Returns the current time as libev would use it. Please note that the	178	Returns the current time as libev would use it. Please note that the
117	C<ev_now> function is usually faster and also often returns the timestamp	179	C<ev_now> function is usually faster and also often returns the timestamp
118	you actually want to know.	180	you actually want to know. Also interesting is the combination of
		181	C<ev_now_update> and C<ev_now>.
119		182
120	=item ev_sleep (ev_tstamp interval)	183	=item ev_sleep (ev_tstamp interval)
121		184
122	Sleep for the given interval: The current thread will be blocked until	185	Sleep for the given interval: The current thread will be blocked
123	either it is interrupted or the given time interval has passed. Basically	186	until either it is interrupted or the given time interval has
		187	passed (approximately - it might return a bit earlier even if not
		188	interrupted). Returns immediately if C<< interval <= 0 >>.
		189
124	this is a subsecond-resolution C<sleep ()>.	190	Basically this is a sub-second-resolution C<sleep ()>.
		191
		192	The range of the C<interval> is limited - libev only guarantees to work
		193	with sleep times of up to one day (C<< interval <= 86400 >>).
125		194
126	=item int ev_version_major ()	195	=item int ev_version_major ()
127		196
128	=item int ev_version_minor ()	197	=item int ev_version_minor ()
129		198
…		…
140	as this indicates an incompatible change. Minor versions are usually	209	as this indicates an incompatible change. Minor versions are usually
141	compatible to older versions, so a larger minor version alone is usually	210	compatible to older versions, so a larger minor version alone is usually
142	not a problem.	211	not a problem.
143		212
144	Example: Make sure we haven't accidentally been linked against the wrong	213	Example: Make sure we haven't accidentally been linked against the wrong
145	version.	214	version (note, however, that this will not detect other ABI mismatches,
		215	such as LFS or reentrancy).
146		216
147	assert (("libev version mismatch",	217	assert (("libev version mismatch",
148	ev_version_major () == EV_VERSION_MAJOR	218	ev_version_major () == EV_VERSION_MAJOR
149	&& ev_version_minor () >= EV_VERSION_MINOR));	219	&& ev_version_minor () >= EV_VERSION_MINOR));
150		220
151	=item unsigned int ev_supported_backends ()	221	=item unsigned int ev_supported_backends ()
152		222
153	Return the set of all backends (i.e. their corresponding C<EV_BACKEND_*>	223	Return the set of all backends (i.e. their corresponding C<EV_BACKEND_*>
154	value) compiled into this binary of libev (independent of their	224	value) compiled into this binary of libev (independent of their
…		…
156	a description of the set values.	226	a description of the set values.
157		227
158	Example: make sure we have the epoll method, because yeah this is cool and	228	Example: make sure we have the epoll method, because yeah this is cool and
159	a must have and can we have a torrent of it please!!!11	229	a must have and can we have a torrent of it please!!!11
160		230
161	assert (("sorry, no epoll, no sex",	231	assert (("sorry, no epoll, no sex",
162	ev_supported_backends () & EVBACKEND_EPOLL));	232	ev_supported_backends () & EVBACKEND_EPOLL));
163		233
164	=item unsigned int ev_recommended_backends ()	234	=item unsigned int ev_recommended_backends ()
165		235
166	Return the set of all backends compiled into this binary of libev and also	236	Return the set of all backends compiled into this binary of libev and
167	recommended for this platform. This set is often smaller than the one	237	also recommended for this platform, meaning it will work for most file
		238	descriptor types. This set is often smaller than the one returned by
168	returned by C<ev_supported_backends>, as for example kqueue is broken on	239	C<ev_supported_backends>, as for example kqueue is broken on most BSDs
169	most BSDs and will not be autodetected unless you explicitly request it	240	and will not be auto-detected unless you explicitly request it (assuming
170	(assuming you know what you are doing). This is the set of backends that	241	you know what you are doing). This is the set of backends that libev will
171	libev will probe for if you specify no backends explicitly.	242	probe for if you specify no backends explicitly.
172		243
173	=item unsigned int ev_embeddable_backends ()	244	=item unsigned int ev_embeddable_backends ()
174		245
175	Returns the set of backends that are embeddable in other event loops. This	246	Returns the set of backends that are embeddable in other event loops. This
176	is the theoretical, all-platform, value. To find which backends	247	value is platform-specific but can include backends not available on the
177	might be supported on the current system, you would need to look at	248	current system. To find which embeddable backends might be supported on
178	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for	249	the current system, you would need to look at C<ev_embeddable_backends ()
179	recommended ones.	250	& ev_supported_backends ()>, likewise for recommended ones.
180		251
181	See the description of C<ev_embed> watchers for more info.	252	See the description of C<ev_embed> watchers for more info.
182		253
183	=item ev_set_allocator (void *(*cb)(void *ptr, long size))	254	=item ev_set_allocator (void *(*cb)(void *ptr, long size) throw ())
184		255
185	Sets the allocation function to use (the prototype is similar - the	256	Sets the allocation function to use (the prototype is similar - the
186	semantics is identical - to the realloc C function). It is used to	257	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
187	allocate and free memory (no surprises here). If it returns zero when	258	used to allocate and free memory (no surprises here). If it returns zero
188	memory needs to be allocated, the library might abort or take some	259	when memory needs to be allocated (C<size != 0>), the library might abort
189	potentially destructive action. The default is your system realloc	260	or take some potentially destructive action.
190	function.	261
		262	Since some systems (at least OpenBSD and Darwin) fail to implement
		263	correct C<realloc> semantics, libev will use a wrapper around the system
		264	C<realloc> and C<free> functions by default.
191		265
192	You could override this function in high-availability programs to, say,	266	You could override this function in high-availability programs to, say,
193	free some memory if it cannot allocate memory, to use a special allocator,	267	free some memory if it cannot allocate memory, to use a special allocator,
194	or even to sleep a while and retry until some memory is available.	268	or even to sleep a while and retry until some memory is available.
195		269
		270	Example: The following is the C<realloc> function that libev itself uses
		271	which should work with C<realloc> and C<free> functions of all kinds and
		272	is probably a good basis for your own implementation.
		273
		274	static void *
		275	ev_realloc_emul (void *ptr, long size) EV_NOEXCEPT
		276	{
		277	if (size)
		278	return realloc (ptr, size);
		279
		280	free (ptr);
		281	return 0;
		282	}
		283
196	Example: Replace the libev allocator with one that waits a bit and then	284	Example: Replace the libev allocator with one that waits a bit and then
197	retries).	285	retries.
198		286
199	static void *	287	static void *
200	persistent_realloc (void *ptr, size_t size)	288	persistent_realloc (void *ptr, size_t size)
201	{	289	{
		290	if (!size)
		291	{
		292	free (ptr);
		293	return 0;
		294	}
		295
202	for (;;)	296	for (;;)
203	{	297	{
204	void *newptr = realloc (ptr, size);	298	void *newptr = realloc (ptr, size);
205		299
206	if (newptr)	300	if (newptr)
…		…
211	}	305	}
212		306
213	...	307	...
214	ev_set_allocator (persistent_realloc);	308	ev_set_allocator (persistent_realloc);
215		309
216	=item ev_set_syserr_cb (void (*cb)(const char *msg));	310	=item ev_set_syserr_cb (void (*cb)(const char *msg) throw ())
217		311
218	Set the callback function to call on a retryable syscall error (such	312	Set the callback function to call on a retryable system call error (such
219	as failed select, poll, epoll_wait). The message is a printable string	313	as failed select, poll, epoll_wait). The message is a printable string
220	indicating the system call or subsystem causing the problem. If this	314	indicating the system call or subsystem causing the problem. If this
221	callback is set, then libev will expect it to remedy the sitution, no	315	callback is set, then libev will expect it to remedy the situation, no
222	matter what, when it returns. That is, libev will generally retry the	316	matter what, when it returns. That is, libev will generally retry the
223	requested operation, or, if the condition doesn't go away, do bad stuff	317	requested operation, or, if the condition doesn't go away, do bad stuff
224	(such as abort).	318	(such as abort).
225		319
226	Example: This is basically the same thing that libev does internally, too.	320	Example: This is basically the same thing that libev does internally, too.
…		…
233	}	327	}
234		328
235	...	329	...
236	ev_set_syserr_cb (fatal_error);	330	ev_set_syserr_cb (fatal_error);
237		331
		332	=item ev_feed_signal (int signum)
		333
		334	This function can be used to "simulate" a signal receive. It is completely
		335	safe to call this function at any time, from any context, including signal
		336	handlers or random threads.
		337
		338	Its main use is to customise signal handling in your process, especially
		339	in the presence of threads. For example, you could block signals
		340	by default in all threads (and specifying C<EVFLAG_NOSIGMASK> when
		341	creating any loops), and in one thread, use C<sigwait> or any other
		342	mechanism to wait for signals, then "deliver" them to libev by calling
		343	C<ev_feed_signal>.
		344
238	=back	345	=back
239		346
240	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	347	=head1 FUNCTIONS CONTROLLING EVENT LOOPS
241		348
242	An event loop is described by a C<struct ev_loop *>. The library knows two	349	An event loop is described by a C<struct ev_loop *> (the C<struct> is
243	types of such loops, the I<default> loop, which supports signals and child	350	I<not> optional in this case unless libev 3 compatibility is disabled, as
244	events, and dynamically created loops which do not.	351	libev 3 had an C<ev_loop> function colliding with the struct name).
245		352
246	If you use threads, a common model is to run the default event loop	353	The library knows two types of such loops, the I<default> loop, which
247	in your main thread (or in a separate thread) and for each thread you	354	supports child process events, and dynamically created event loops which
248	create, you also create another event loop. Libev itself does no locking	355	do not.
249	whatsoever, so if you mix calls to the same event loop in different
250	threads, make sure you lock (this is usually a bad idea, though, even if
251	done correctly, because it's hideous and inefficient).
252		356
253	=over 4	357	=over 4
254		358
255	=item struct ev_loop *ev_default_loop (unsigned int flags)	359	=item struct ev_loop *ev_default_loop (unsigned int flags)
256		360
257	This will initialise the default event loop if it hasn't been initialised	361	This returns the "default" event loop object, which is what you should
258	yet and return it. If the default loop could not be initialised, returns	362	normally use when you just need "the event loop". Event loop objects and
259	false. If it already was initialised it simply returns it (and ignores the	363	the C<flags> parameter are described in more detail in the entry for
260	flags. If that is troubling you, check C<ev_backend ()> afterwards).	364	C<ev_loop_new>.
		365
		366	If the default loop is already initialised then this function simply
		367	returns it (and ignores the flags. If that is troubling you, check
		368	C<ev_backend ()> afterwards). Otherwise it will create it with the given
		369	flags, which should almost always be C<0>, unless the caller is also the
		370	one calling C<ev_run> or otherwise qualifies as "the main program".
261		371
262	If you don't know what event loop to use, use the one returned from this	372	If you don't know what event loop to use, use the one returned from this
263	function.	373	function (or via the C<EV_DEFAULT> macro).
		374
		375	Note that this function is I<not> thread-safe, so if you want to use it
		376	from multiple threads, you have to employ some kind of mutex (note also
		377	that this case is unlikely, as loops cannot be shared easily between
		378	threads anyway).
		379
		380	The default loop is the only loop that can handle C<ev_child> watchers,
		381	and to do this, it always registers a handler for C<SIGCHLD>. If this is
		382	a problem for your application you can either create a dynamic loop with
		383	C<ev_loop_new> which doesn't do that, or you can simply overwrite the
		384	C<SIGCHLD> signal handler I<after> calling C<ev_default_init>.
		385
		386	Example: This is the most typical usage.
		387
		388	if (!ev_default_loop (0))
		389	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		390
		391	Example: Restrict libev to the select and poll backends, and do not allow
		392	environment settings to be taken into account:
		393
		394	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
		395
		396	=item struct ev_loop *ev_loop_new (unsigned int flags)
		397
		398	This will create and initialise a new event loop object. If the loop
		399	could not be initialised, returns false.
		400
		401	This function is thread-safe, and one common way to use libev with
		402	threads is indeed to create one loop per thread, and using the default
		403	loop in the "main" or "initial" thread.
264		404
265	The flags argument can be used to specify special behaviour or specific	405	The flags argument can be used to specify special behaviour or specific
266	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	406	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
267		407
268	The following flags are supported:	408	The following flags are supported:
…		…
274	The default flags value. Use this if you have no clue (it's the right	414	The default flags value. Use this if you have no clue (it's the right
275	thing, believe me).	415	thing, believe me).
276		416
277	=item C<EVFLAG_NOENV>	417	=item C<EVFLAG_NOENV>
278		418
279	If this flag bit is ored into the flag value (or the program runs setuid	419	If this flag bit is or'ed into the flag value (or the program runs setuid
280	or setgid) then libev will I<not> look at the environment variable	420	or setgid) then libev will I<not> look at the environment variable
281	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will	421	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will
282	override the flags completely if it is found in the environment. This is	422	override the flags completely if it is found in the environment. This is
283	useful to try out specific backends to test their performance, or to work	423	useful to try out specific backends to test their performance, to work
284	around bugs.	424	around bugs, or to make libev threadsafe (accessing environment variables
		425	cannot be done in a threadsafe way, but usually it works if no other
		426	thread modifies them).
285		427
286	=item C<EVFLAG_FORKCHECK>	428	=item C<EVFLAG_FORKCHECK>
287		429
288	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after	430	Instead of calling C<ev_loop_fork> manually after a fork, you can also
289	a fork, you can also make libev check for a fork in each iteration by	431	make libev check for a fork in each iteration by enabling this flag.
290	enabling this flag.
291		432
292	This works by calling C<getpid ()> on every iteration of the loop,	433	This works by calling C<getpid ()> on every iteration of the loop,
293	and thus this might slow down your event loop if you do a lot of loop	434	and thus this might slow down your event loop if you do a lot of loop
294	iterations and little real work, but is usually not noticeable (on my	435	iterations and little real work, but is usually not noticeable (on my
295	Linux system for example, C<getpid> is actually a simple 5-insn sequence	436	GNU/Linux system for example, C<getpid> is actually a simple 5-insn
296	without a syscall and thus I<very> fast, but my Linux system also has	437	sequence without a system call and thus I<very> fast, but my GNU/Linux
297	C<pthread_atfork> which is even faster).	438	system also has C<pthread_atfork> which is even faster). (Update: glibc
		439	versions 2.25 apparently removed the C<getpid> optimisation again).
298		440
299	The big advantage of this flag is that you can forget about fork (and	441	The big advantage of this flag is that you can forget about fork (and
300	forget about forgetting to tell libev about forking) when you use this	442	forget about forgetting to tell libev about forking, although you still
301	flag.	443	have to ignore C<SIGPIPE>) when you use this flag.
302		444
303	This flag setting cannot be overriden or specified in the C<LIBEV_FLAGS>	445	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>
304	environment variable.	446	environment variable.
		447
		448	=item C<EVFLAG_NOINOTIFY>
		449
		450	When this flag is specified, then libev will not attempt to use the
		451	I<inotify> API for its C<ev_stat> watchers. Apart from debugging and
		452	testing, this flag can be useful to conserve inotify file descriptors, as
		453	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.
		454
		455	=item C<EVFLAG_SIGNALFD>
		456
		457	When this flag is specified, then libev will attempt to use the
		458	I<signalfd> API for its C<ev_signal> (and C<ev_child>) watchers. This API
		459	delivers signals synchronously, which makes it both faster and might make
		460	it possible to get the queued signal data. It can also simplify signal
		461	handling with threads, as long as you properly block signals in your
		462	threads that are not interested in handling them.
		463
		464	Signalfd will not be used by default as this changes your signal mask, and
		465	there are a lot of shoddy libraries and programs (glib's threadpool for
		466	example) that can't properly initialise their signal masks.
		467
		468	=item C<EVFLAG_NOSIGMASK>
		469
		470	When this flag is specified, then libev will avoid to modify the signal
		471	mask. Specifically, this means you have to make sure signals are unblocked
		472	when you want to receive them.
		473
		474	This behaviour is useful when you want to do your own signal handling, or
		475	want to handle signals only in specific threads and want to avoid libev
		476	unblocking the signals.
		477
		478	It's also required by POSIX in a threaded program, as libev calls
		479	C<sigprocmask>, whose behaviour is officially unspecified.
		480
		481	This flag's behaviour will become the default in future versions of libev.
305		482
306	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	483	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
307		484
308	This is your standard select(2) backend. Not I<completely> standard, as	485	This is your standard select(2) backend. Not I<completely> standard, as
309	libev tries to roll its own fd_set with no limits on the number of fds,	486	libev tries to roll its own fd_set with no limits on the number of fds,
310	but if that fails, expect a fairly low limit on the number of fds when	487	but if that fails, expect a fairly low limit on the number of fds when
311	using this backend. It doesn't scale too well (O(highest_fd)), but its	488	using this backend. It doesn't scale too well (O(highest_fd)), but its
312	usually the fastest backend for a low number of (low-numbered :) fds.	489	usually the fastest backend for a low number of (low-numbered :) fds.
313		490
314	To get good performance out of this backend you need a high amount of	491	To get good performance out of this backend you need a high amount of
315	parallelity (most of the file descriptors should be busy). If you are	492	parallelism (most of the file descriptors should be busy). If you are
316	writing a server, you should C<accept ()> in a loop to accept as many	493	writing a server, you should C<accept ()> in a loop to accept as many
317	connections as possible during one iteration. You might also want to have	494	connections as possible during one iteration. You might also want to have
318	a look at C<ev_set_io_collect_interval ()> to increase the amount of	495	a look at C<ev_set_io_collect_interval ()> to increase the amount of
319	readyness notifications you get per iteration.	496	readiness notifications you get per iteration.
		497
		498	This backend maps C<EV_READ> to the C<readfds> set and C<EV_WRITE> to the
		499	C<writefds> set (and to work around Microsoft Windows bugs, also onto the
		500	C<exceptfds> set on that platform).
320		501
321	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)	502	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)
322		503
323	And this is your standard poll(2) backend. It's more complicated	504	And this is your standard poll(2) backend. It's more complicated
324	than select, but handles sparse fds better and has no artificial	505	than select, but handles sparse fds better and has no artificial
325	limit on the number of fds you can use (except it will slow down	506	limit on the number of fds you can use (except it will slow down
326	considerably with a lot of inactive fds). It scales similarly to select,	507	considerably with a lot of inactive fds). It scales similarly to select,
327	i.e. O(total_fds). See the entry for C<EVBACKEND_SELECT>, above, for	508	i.e. O(total_fds). See the entry for C<EVBACKEND_SELECT>, above, for
328	performance tips.	509	performance tips.
329		510
		511	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and
		512	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.
		513
330	=item C<EVBACKEND_EPOLL> (value 4, Linux)	514	=item C<EVBACKEND_EPOLL> (value 4, Linux)
331		515
		516	Use the linux-specific epoll(7) interface (for both pre- and post-2.6.9
		517	kernels).
		518
332	For few fds, this backend is a bit little slower than poll and select,	519	For few fds, this backend is a bit little slower than poll and select, but
333	but it scales phenomenally better. While poll and select usually scale	520	it scales phenomenally better. While poll and select usually scale like
334	like O(total_fds) where n is the total number of fds (or the highest fd),	521	O(total_fds) where total_fds is the total number of fds (or the highest
335	epoll scales either O(1) or O(active_fds). The epoll design has a number	522	fd), epoll scales either O(1) or O(active_fds).
336	of shortcomings, such as silently dropping events in some hard-to-detect	523
337	cases and rewiring a syscall per fd change, no fork support and bad	524	The epoll mechanism deserves honorable mention as the most misdesigned
338	support for dup.	525	of the more advanced event mechanisms: mere annoyances include silently
		526	dropping file descriptors, requiring a system call per change per file
		527	descriptor (and unnecessary guessing of parameters), problems with dup,
		528	returning before the timeout value, resulting in additional iterations
		529	(and only giving 5ms accuracy while select on the same platform gives
		530	0.1ms) and so on. The biggest issue is fork races, however - if a program
		531	forks then I<both> parent and child process have to recreate the epoll
		532	set, which can take considerable time (one syscall per file descriptor)
		533	and is of course hard to detect.
		534
		535	Epoll is also notoriously buggy - embedding epoll fds I<should> work,
		536	but of course I<doesn't>, and epoll just loves to report events for
		537	totally I<different> file descriptors (even already closed ones, so
		538	one cannot even remove them from the set) than registered in the set
		539	(especially on SMP systems). Libev tries to counter these spurious
		540	notifications by employing an additional generation counter and comparing
		541	that against the events to filter out spurious ones, recreating the set
		542	when required. Epoll also erroneously rounds down timeouts, but gives you
		543	no way to know when and by how much, so sometimes you have to busy-wait
		544	because epoll returns immediately despite a nonzero timeout. And last
		545	not least, it also refuses to work with some file descriptors which work
		546	perfectly fine with C<select> (files, many character devices...).
		547
		548	Epoll is truly the train wreck among event poll mechanisms, a frankenpoll,
		549	cobbled together in a hurry, no thought to design or interaction with
		550	others. Oh, the pain, will it ever stop...
339		551
340	While stopping, setting and starting an I/O watcher in the same iteration	552	While stopping, setting and starting an I/O watcher in the same iteration
341	will result in some caching, there is still a syscall per such incident	553	will result in some caching, there is still a system call per such
342	(because the fd could point to a different file description now), so its	554	incident (because the same I<file descriptor> could point to a different
343	best to avoid that. Also, C<dup ()>'ed file descriptors might not work	555	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed
344	very well if you register events for both fds.	556	file descriptors might not work very well if you register events for both
345		557	file descriptors.
346	Please note that epoll sometimes generates spurious notifications, so you
347	need to use non-blocking I/O or other means to avoid blocking when no data
348	(or space) is available.
349		558
350	Best performance from this backend is achieved by not unregistering all	559	Best performance from this backend is achieved by not unregistering all
351	watchers for a file descriptor until it has been closed, if possible, i.e.	560	watchers for a file descriptor until it has been closed, if possible,
352	keep at least one watcher active per fd at all times.	561	i.e. keep at least one watcher active per fd at all times. Stopping and
		562	starting a watcher (without re-setting it) also usually doesn't cause
		563	extra overhead. A fork can both result in spurious notifications as well
		564	as in libev having to destroy and recreate the epoll object, which can
		565	take considerable time and thus should be avoided.
353		566
		567	All this means that, in practice, C<EVBACKEND_SELECT> can be as fast or
		568	faster than epoll for maybe up to a hundred file descriptors, depending on
		569	the usage. So sad.
		570
354	While nominally embeddeble in other event loops, this feature is broken in	571	While nominally embeddable in other event loops, this feature is broken in
355	all kernel versions tested so far.	572	a lot of kernel revisions, but probably(!) works in current versions.
		573
		574	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
		575	C<EVBACKEND_POLL>.
		576
		577	=item C<EVBACKEND_LINUXAIO> (value 64, Linux)
		578
		579	Use the linux-specific linux aio (I<not> C<< aio(7) >> but C<<
		580	io_submit(2) >>) event interface available in post-4.18 kernels.
		581
		582	If this backend works for you (as of this writing, it was very
		583	experimental), it is the best event interface available on linux and might
		584	be well worth enabling it - if it isn't available in your kernel this will
		585	be detected and this backend will be skipped.
		586
		587	This backend can batch oneshot requests and supports a user-space ring
		588	buffer to receive events. It also doesn't suffer from most of the design
		589	problems of epoll (such as not being able to remove event sources from the
		590	epoll set), and generally sounds too good to be true. Because, this being
		591	the linux kernel, of course it suffers from a whole new set of limitations.
		592
		593	For one, it is not easily embeddable (but probably could be done using
		594	an event fd at some extra overhead). It also is subject to a system wide
		595	limit that can be configured in F</proc/sys/fs/aio-max-nr> - each loop
		596	currently requires C<61> of this number. If no aio requests are left, this
		597	backend will be skipped during initialisation.
		598
		599	Most problematic in practise, however, is that not all file descriptors
		600	work with it. For example, in linux 5.1, tcp sockets, pipes, event fds,
		601	files, F</dev/null> and a few others are supported, but ttys do not work
		602	properly (a known bug that the kernel developers don't care about, see
		603	L<https://lore.kernel.org/patchwork/patch/1047453/>), so this is not
		604	(yet?) a generic event polling interface.
		605
		606	Overall, it seems the linux developers just don't want it to have a
		607	generic event handling mechanism other than C<select> or C<poll>.
		608
		609	To work around the fd type problem, the current version of libev uses
		610	epoll as a fallback for file deescriptor types that do not work. Epoll
		611	is used in, kind of, slow mode that hopefully avoids most of its design
		612	problems and requires 1-3 extra syscalls per active fd every iteration.
		613
		614	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
		615	C<EVBACKEND_POLL>.
356		616
357	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	617	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
358		618
359	Kqueue deserves special mention, as at the time of this writing, it	619	Kqueue deserves special mention, as at the time of this writing, it
360	was broken on all BSDs except NetBSD (usually it doesn't work reliably	620	was broken on all BSDs except NetBSD (usually it doesn't work reliably
361	with anything but sockets and pipes, except on Darwin, where of course	621	with anything but sockets and pipes, except on Darwin, where of course
362	it's completely useless). For this reason it's not being "autodetected"	622	it's completely useless). Unlike epoll, however, whose brokenness
		623	is by design, these kqueue bugs can (and eventually will) be fixed
		624	without API changes to existing programs. For this reason it's not being
363	unless you explicitly specify it explicitly in the flags (i.e. using	625	"auto-detected" unless you explicitly specify it in the flags (i.e. using
364	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)	626	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)
365	system like NetBSD.	627	system like NetBSD.
366		628
367	You still can embed kqueue into a normal poll or select backend and use it	629	You still can embed kqueue into a normal poll or select backend and use it
368	only for sockets (after having made sure that sockets work with kqueue on	630	only for sockets (after having made sure that sockets work with kqueue on
369	the target platform). See C<ev_embed> watchers for more info.	631	the target platform). See C<ev_embed> watchers for more info.
370		632
371	It scales in the same way as the epoll backend, but the interface to the	633	It scales in the same way as the epoll backend, but the interface to the
372	kernel is more efficient (which says nothing about its actual speed, of	634	kernel is more efficient (which says nothing about its actual speed, of
373	course). While stopping, setting and starting an I/O watcher does never	635	course). While stopping, setting and starting an I/O watcher does never
374	cause an extra syscall as with C<EVBACKEND_EPOLL>, it still adds up to	636	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to
375	two event changes per incident, support for C<fork ()> is very bad and it	637	two event changes per incident. Support for C<fork ()> is very bad (you
		638	might have to leak fd's on fork, but it's more sane than epoll) and it
376	drops fds silently in similarly hard-to-detect cases.	639	drops fds silently in similarly hard-to-detect cases.
377		640
378	This backend usually performs well under most conditions.	641	This backend usually performs well under most conditions.
379		642
380	While nominally embeddable in other event loops, this doesn't work	643	While nominally embeddable in other event loops, this doesn't work
381	everywhere, so you might need to test for this. And since it is broken	644	everywhere, so you might need to test for this. And since it is broken
382	almost everywhere, you should only use it when you have a lot of sockets	645	almost everywhere, you should only use it when you have a lot of sockets
383	(for which it usually works), by embedding it into another event loop	646	(for which it usually works), by embedding it into another event loop
384	(e.g. C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>) and using it only for	647	(e.g. C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> (but C<poll> is of course
385	sockets.	648	also broken on OS X)) and, did I mention it, using it only for sockets.
		649
		650	This backend maps C<EV_READ> into an C<EVFILT_READ> kevent with
		651	C<NOTE_EOF>, and C<EV_WRITE> into an C<EVFILT_WRITE> kevent with
		652	C<NOTE_EOF>.
386		653
387	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)	654	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)
388		655
389	This is not implemented yet (and might never be, unless you send me an	656	This is not implemented yet (and might never be, unless you send me an
390	implementation). According to reports, C</dev/poll> only supports sockets	657	implementation). According to reports, C</dev/poll> only supports sockets
…		…
394	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	661	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
395		662
396	This uses the Solaris 10 event port mechanism. As with everything on Solaris,	663	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
397	it's really slow, but it still scales very well (O(active_fds)).	664	it's really slow, but it still scales very well (O(active_fds)).
398		665
399	Please note that solaris event ports can deliver a lot of spurious
400	notifications, so you need to use non-blocking I/O or other means to avoid
401	blocking when no data (or space) is available.
402
403	While this backend scales well, it requires one system call per active	666	While this backend scales well, it requires one system call per active
404	file descriptor per loop iteration. For small and medium numbers of file	667	file descriptor per loop iteration. For small and medium numbers of file
405	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend	668	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
406	might perform better.	669	might perform better.
407		670
		671	On the positive side, this backend actually performed fully to
		672	specification in all tests and is fully embeddable, which is a rare feat
		673	among the OS-specific backends (I vastly prefer correctness over speed
		674	hacks).
		675
		676	On the negative side, the interface is I<bizarre> - so bizarre that
		677	even sun itself gets it wrong in their code examples: The event polling
		678	function sometimes returns events to the caller even though an error
		679	occurred, but with no indication whether it has done so or not (yes, it's
		680	even documented that way) - deadly for edge-triggered interfaces where you
		681	absolutely have to know whether an event occurred or not because you have
		682	to re-arm the watcher.
		683
		684	Fortunately libev seems to be able to work around these idiocies.
		685
		686	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
		687	C<EVBACKEND_POLL>.
		688
408	=item C<EVBACKEND_ALL>	689	=item C<EVBACKEND_ALL>
409		690
410	Try all backends (even potentially broken ones that wouldn't be tried	691	Try all backends (even potentially broken ones that wouldn't be tried
411	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	692	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
412	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	693	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
413		694
414	It is definitely not recommended to use this flag.	695	It is definitely not recommended to use this flag, use whatever
		696	C<ev_recommended_backends ()> returns, or simply do not specify a backend
		697	at all.
		698
		699	=item C<EVBACKEND_MASK>
		700
		701	Not a backend at all, but a mask to select all backend bits from a
		702	C<flags> value, in case you want to mask out any backends from a flags
		703	value (e.g. when modifying the C<LIBEV_FLAGS> environment variable).
415		704
416	=back	705	=back
417		706
418	If one or more of these are ored into the flags value, then only these	707	If one or more of the backend flags are or'ed into the flags value,
419	backends will be tried (in the reverse order as given here). If none are	708	then only these backends will be tried (in the reverse order as listed
420	specified, most compiled-in backend will be tried, usually in reverse	709	here). If none are specified, all backends in C<ev_recommended_backends
421	order of their flag values :)	710	()> will be tried.
422
423	The most typical usage is like this:
424
425	if (!ev_default_loop (0))
426	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
427
428	Restrict libev to the select and poll backends, and do not allow
429	environment settings to be taken into account:
430
431	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
432
433	Use whatever libev has to offer, but make sure that kqueue is used if
434	available (warning, breaks stuff, best use only with your own private
435	event loop and only if you know the OS supports your types of fds):
436
437	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
438
439	=item struct ev_loop *ev_loop_new (unsigned int flags)
440
441	Similar to C<ev_default_loop>, but always creates a new event loop that is
442	always distinct from the default loop. Unlike the default loop, it cannot
443	handle signal and child watchers, and attempts to do so will be greeted by
444	undefined behaviour (or a failed assertion if assertions are enabled).
445		711
446	Example: Try to create a event loop that uses epoll and nothing else.	712	Example: Try to create a event loop that uses epoll and nothing else.
447		713
448	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	714	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
449	if (!epoller)	715	if (!epoller)
450	fatal ("no epoll found here, maybe it hides under your chair");	716	fatal ("no epoll found here, maybe it hides under your chair");
451		717
		718	Example: Use whatever libev has to offer, but make sure that kqueue is
		719	used if available.
		720
		721	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_KQUEUE);
		722
		723	Example: Similarly, on linux, you mgiht want to take advantage of the
		724	linux aio backend if possible, but fall back to something else if that
		725	isn't available.
		726
		727	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_LINUXAIO);
		728
452	=item ev_default_destroy ()	729	=item ev_loop_destroy (loop)
453		730
454	Destroys the default loop again (frees all memory and kernel state	731	Destroys an event loop object (frees all memory and kernel state
455	etc.). None of the active event watchers will be stopped in the normal	732	etc.). None of the active event watchers will be stopped in the normal
456	sense, so e.g. C<ev_is_active> might still return true. It is your	733	sense, so e.g. C<ev_is_active> might still return true. It is your
457	responsibility to either stop all watchers cleanly yoursef I<before>	734	responsibility to either stop all watchers cleanly yourself I<before>
458	calling this function, or cope with the fact afterwards (which is usually	735	calling this function, or cope with the fact afterwards (which is usually
459	the easiest thing, you can just ignore the watchers and/or C<free ()> them	736	the easiest thing, you can just ignore the watchers and/or C<free ()> them
460	for example).	737	for example).
461		738
462	Note that certain global state, such as signal state, will not be freed by	739	Note that certain global state, such as signal state (and installed signal
463	this function, and related watchers (such as signal and child watchers)	740	handlers), will not be freed by this function, and related watchers (such
464	would need to be stopped manually.	741	as signal and child watchers) would need to be stopped manually.
465		742
466	In general it is not advisable to call this function except in the	743	This function is normally used on loop objects allocated by
467	rare occasion where you really need to free e.g. the signal handling	744	C<ev_loop_new>, but it can also be used on the default loop returned by
		745	C<ev_default_loop>, in which case it is not thread-safe.
		746
		747	Note that it is not advisable to call this function on the default loop
		748	except in the rare occasion where you really need to free its resources.
468	pipe fds. If you need dynamically allocated loops it is better to use	749	If you need dynamically allocated loops it is better to use C<ev_loop_new>
469	C<ev_loop_new> and C<ev_loop_destroy>).	750	and C<ev_loop_destroy>.
470		751
471	=item ev_loop_destroy (loop)	752	=item ev_loop_fork (loop)
472		753
473	Like C<ev_default_destroy>, but destroys an event loop created by an	754	This function sets a flag that causes subsequent C<ev_run> iterations
474	earlier call to C<ev_loop_new>.
475
476	=item ev_default_fork ()
477
478	This function reinitialises the kernel state for backends that have	755	to reinitialise the kernel state for backends that have one. Despite
479	one. Despite the name, you can call it anytime, but it makes most sense	756	the name, you can call it anytime you are allowed to start or stop
480	after forking, in either the parent or child process (or both, but that	757	watchers (except inside an C<ev_prepare> callback), but it makes most
481	again makes little sense).	758	sense after forking, in the child process. You I<must> call it (or use
		759	C<EVFLAG_FORKCHECK>) in the child before resuming or calling C<ev_run>.
482		760
483	You I<must> call this function in the child process after forking if and	761	In addition, if you want to reuse a loop (via this function or
484	only if you want to use the event library in both processes. If you just	762	C<EVFLAG_FORKCHECK>), you I<also> have to ignore C<SIGPIPE>.
485	fork+exec, you don't have to call it.	763
		764	Again, you I<have> to call it on I<any> loop that you want to re-use after
		765	a fork, I<even if you do not plan to use the loop in the parent>. This is
		766	because some kernel interfaces *cough* I<kqueue> *cough* do funny things
		767	during fork.
		768
		769	On the other hand, you only need to call this function in the child
		770	process if and only if you want to use the event loop in the child. If
		771	you just fork+exec or create a new loop in the child, you don't have to
		772	call it at all (in fact, C<epoll> is so badly broken that it makes a
		773	difference, but libev will usually detect this case on its own and do a
		774	costly reset of the backend).
486		775
487	The function itself is quite fast and it's usually not a problem to call	776	The function itself is quite fast and it's usually not a problem to call
488	it just in case after a fork. To make this easy, the function will fit in	777	it just in case after a fork.
489	quite nicely into a call to C<pthread_atfork>:
490		778
		779	Example: Automate calling C<ev_loop_fork> on the default loop when
		780	using pthreads.
		781
		782	static void
		783	post_fork_child (void)
		784	{
		785	ev_loop_fork (EV_DEFAULT);
		786	}
		787
		788	...
491	pthread_atfork (0, 0, ev_default_fork);	789	pthread_atfork (0, 0, post_fork_child);
492		790
493	At the moment, C<EVBACKEND_SELECT> and C<EVBACKEND_POLL> are safe to use	791	=item int ev_is_default_loop (loop)
494	without calling this function, so if you force one of those backends you
495	do not need to care.
496		792
497	=item ev_loop_fork (loop)	793	Returns true when the given loop is, in fact, the default loop, and false
		794	otherwise.
498		795
499	Like C<ev_default_fork>, but acts on an event loop created by
500	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
501	after fork, and how you do this is entirely your own problem.
502
503	=item unsigned int ev_loop_count (loop)	796	=item unsigned int ev_iteration (loop)
504		797
505	Returns the count of loop iterations for the loop, which is identical to	798	Returns the current iteration count for the event loop, which is identical
506	the number of times libev did poll for new events. It starts at C<0> and	799	to the number of times libev did poll for new events. It starts at C<0>
507	happily wraps around with enough iterations.	800	and happily wraps around with enough iterations.
508		801
509	This value can sometimes be useful as a generation counter of sorts (it	802	This value can sometimes be useful as a generation counter of sorts (it
510	"ticks" the number of loop iterations), as it roughly corresponds with	803	"ticks" the number of loop iterations), as it roughly corresponds with
511	C<ev_prepare> and C<ev_check> calls.	804	C<ev_prepare> and C<ev_check> calls - and is incremented between the
		805	prepare and check phases.
		806
		807	=item unsigned int ev_depth (loop)
		808
		809	Returns the number of times C<ev_run> was entered minus the number of
		810	times C<ev_run> was exited normally, in other words, the recursion depth.
		811
		812	Outside C<ev_run>, this number is zero. In a callback, this number is
		813	C<1>, unless C<ev_run> was invoked recursively (or from another thread),
		814	in which case it is higher.
		815
		816	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread,
		817	throwing an exception etc.), doesn't count as "exit" - consider this
		818	as a hint to avoid such ungentleman-like behaviour unless it's really
		819	convenient, in which case it is fully supported.
512		820
513	=item unsigned int ev_backend (loop)	821	=item unsigned int ev_backend (loop)
514		822
515	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	823	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
516	use.	824	use.
…		…
521	received events and started processing them. This timestamp does not	829	received events and started processing them. This timestamp does not
522	change as long as callbacks are being processed, and this is also the base	830	change as long as callbacks are being processed, and this is also the base
523	time used for relative timers. You can treat it as the timestamp of the	831	time used for relative timers. You can treat it as the timestamp of the
524	event occurring (or more correctly, libev finding out about it).	832	event occurring (or more correctly, libev finding out about it).
525		833
		834	=item ev_now_update (loop)
		835
		836	Establishes the current time by querying the kernel, updating the time
		837	returned by C<ev_now ()> in the progress. This is a costly operation and
		838	is usually done automatically within C<ev_run ()>.
		839
		840	This function is rarely useful, but when some event callback runs for a
		841	very long time without entering the event loop, updating libev's idea of
		842	the current time is a good idea.
		843
		844	See also L</The special problem of time updates> in the C<ev_timer> section.
		845
		846	=item ev_suspend (loop)
		847
		848	=item ev_resume (loop)
		849
		850	These two functions suspend and resume an event loop, for use when the
		851	loop is not used for a while and timeouts should not be processed.
		852
		853	A typical use case would be an interactive program such as a game: When
		854	the user presses C<^Z> to suspend the game and resumes it an hour later it
		855	would be best to handle timeouts as if no time had actually passed while
		856	the program was suspended. This can be achieved by calling C<ev_suspend>
		857	in your C<SIGTSTP> handler, sending yourself a C<SIGSTOP> and calling
		858	C<ev_resume> directly afterwards to resume timer processing.
		859
		860	Effectively, all C<ev_timer> watchers will be delayed by the time spend
		861	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers
		862	will be rescheduled (that is, they will lose any events that would have
		863	occurred while suspended).
		864
		865	After calling C<ev_suspend> you B<must not> call I<any> function on the
		866	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>
		867	without a previous call to C<ev_suspend>.
		868
		869	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the
		870	event loop time (see C<ev_now_update>).
		871
526	=item ev_loop (loop, int flags)	872	=item bool ev_run (loop, int flags)
527		873
528	Finally, this is it, the event handler. This function usually is called	874	Finally, this is it, the event handler. This function usually is called
529	after you initialised all your watchers and you want to start handling	875	after you have initialised all your watchers and you want to start
530	events.	876	handling events. It will ask the operating system for any new events, call
		877	the watcher callbacks, and then repeat the whole process indefinitely: This
		878	is why event loops are called I<loops>.
531		879
532	If the flags argument is specified as C<0>, it will not return until	880	If the flags argument is specified as C<0>, it will keep handling events
533	either no event watchers are active anymore or C<ev_unloop> was called.	881	until either no event watchers are active anymore or C<ev_break> was
		882	called.
534		883
		884	The return value is false if there are no more active watchers (which
		885	usually means "all jobs done" or "deadlock"), and true in all other cases
		886	(which usually means " you should call C<ev_run> again").
		887
535	Please note that an explicit C<ev_unloop> is usually better than	888	Please note that an explicit C<ev_break> is usually better than
536	relying on all watchers to be stopped when deciding when a program has	889	relying on all watchers to be stopped when deciding when a program has
537	finished (especially in interactive programs), but having a program that	890	finished (especially in interactive programs), but having a program
538	automatically loops as long as it has to and no longer by virtue of	891	that automatically loops as long as it has to and no longer by virtue
539	relying on its watchers stopping correctly is a thing of beauty.	892	of relying on its watchers stopping correctly, that is truly a thing of
		893	beauty.
540		894
		895	This function is I<mostly> exception-safe - you can break out of a
		896	C<ev_run> call by calling C<longjmp> in a callback, throwing a C++
		897	exception and so on. This does not decrement the C<ev_depth> value, nor
		898	will it clear any outstanding C<EVBREAK_ONE> breaks.
		899
541	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle	900	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle
542	those events and any outstanding ones, but will not block your process in	901	those events and any already outstanding ones, but will not wait and
543	case there are no events and will return after one iteration of the loop.	902	block your process in case there are no events and will return after one
		903	iteration of the loop. This is sometimes useful to poll and handle new
		904	events while doing lengthy calculations, to keep the program responsive.
544		905
545	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if	906	A flags value of C<EVRUN_ONCE> will look for new events (waiting if
546	neccessary) and will handle those and any outstanding ones. It will block	907	necessary) and will handle those and any already outstanding ones. It
547	your process until at least one new event arrives, and will return after	908	will block your process until at least one new event arrives (which could
548	one iteration of the loop. This is useful if you are waiting for some	909	be an event internal to libev itself, so there is no guarantee that a
549	external event in conjunction with something not expressible using other	910	user-registered callback will be called), and will return after one
		911	iteration of the loop.
		912
		913	This is useful if you are waiting for some external event in conjunction
		914	with something not expressible using other libev watchers (i.e. "roll your
550	libev watchers. However, a pair of C<ev_prepare>/C<ev_check> watchers is	915	own C<ev_run>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is
551	usually a better approach for this kind of thing.	916	usually a better approach for this kind of thing.
552		917
553	Here are the gory details of what C<ev_loop> does:	918	Here are the gory details of what C<ev_run> does (this is for your
		919	understanding, not a guarantee that things will work exactly like this in
		920	future versions):
554		921
		922	- Increment loop depth.
		923	- Reset the ev_break status.
555	- Before the first iteration, call any pending watchers.	924	- Before the first iteration, call any pending watchers.
556	* If there are no active watchers (reference count is zero), return.	925	LOOP:
557	- Queue all prepare watchers and then call all outstanding watchers.	926	- If EVFLAG_FORKCHECK was used, check for a fork.
		927	- If a fork was detected (by any means), queue and call all fork watchers.
		928	- Queue and call all prepare watchers.
		929	- If ev_break was called, goto FINISH.
558	- If we have been forked, recreate the kernel state.	930	- If we have been forked, detach and recreate the kernel state
		931	as to not disturb the other process.
559	- Update the kernel state with all outstanding changes.	932	- Update the kernel state with all outstanding changes.
560	- Update the "event loop time".	933	- Update the "event loop time" (ev_now ()).
561	- Calculate for how long to block.	934	- Calculate for how long to sleep or block, if at all
		935	(active idle watchers, EVRUN_NOWAIT or not having
		936	any active watchers at all will result in not sleeping).
		937	- Sleep if the I/O and timer collect interval say so.
		938	- Increment loop iteration counter.
562	- Block the process, waiting for any events.	939	- Block the process, waiting for any events.
563	- Queue all outstanding I/O (fd) events.	940	- Queue all outstanding I/O (fd) events.
564	- Update the "event loop time" and do time jump handling.	941	- Update the "event loop time" (ev_now ()), and do time jump adjustments.
565	- Queue all outstanding timers.	942	- Queue all expired timers.
566	- Queue all outstanding periodics.	943	- Queue all expired periodics.
567	- If no events are pending now, queue all idle watchers.	944	- Queue all idle watchers with priority higher than that of pending events.
568	- Queue all check watchers.	945	- Queue all check watchers.
569	- Call all queued watchers in reverse order (i.e. check watchers first).	946	- Call all queued watchers in reverse order (i.e. check watchers first).
570	Signals and child watchers are implemented as I/O watchers, and will	947	Signals and child watchers are implemented as I/O watchers, and will
571	be handled here by queueing them when their watcher gets executed.	948	be handled here by queueing them when their watcher gets executed.
572	- If ev_unloop has been called or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	949	- If ev_break has been called, or EVRUN_ONCE or EVRUN_NOWAIT
573	were used, return, otherwise continue with step *.	950	were used, or there are no active watchers, goto FINISH, otherwise
		951	continue with step LOOP.
		952	FINISH:
		953	- Reset the ev_break status iff it was EVBREAK_ONE.
		954	- Decrement the loop depth.
		955	- Return.
574		956
575	Example: Queue some jobs and then loop until no events are outsanding	957	Example: Queue some jobs and then loop until no events are outstanding
576	anymore.	958	anymore.
577		959
578	... queue jobs here, make sure they register event watchers as long	960	... queue jobs here, make sure they register event watchers as long
579	... as they still have work to do (even an idle watcher will do..)	961	... as they still have work to do (even an idle watcher will do..)
580	ev_loop (my_loop, 0);	962	ev_run (my_loop, 0);
581	... jobs done. yeah!	963	... jobs done or somebody called break. yeah!
582		964
583	=item ev_unloop (loop, how)	965	=item ev_break (loop, how)
584		966
585	Can be used to make a call to C<ev_loop> return early (but only after it	967	Can be used to make a call to C<ev_run> return early (but only after it
586	has processed all outstanding events). The C<how> argument must be either	968	has processed all outstanding events). The C<how> argument must be either
587	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	969	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or
588	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	970	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.
		971
		972	This "break state" will be cleared on the next call to C<ev_run>.
		973
		974	It is safe to call C<ev_break> from outside any C<ev_run> calls, too, in
		975	which case it will have no effect.
589		976
590	=item ev_ref (loop)	977	=item ev_ref (loop)
591		978
592	=item ev_unref (loop)	979	=item ev_unref (loop)
593		980
594	Ref/unref can be used to add or remove a reference count on the event	981	Ref/unref can be used to add or remove a reference count on the event
595	loop: Every watcher keeps one reference, and as long as the reference	982	loop: Every watcher keeps one reference, and as long as the reference
596	count is nonzero, C<ev_loop> will not return on its own. If you have	983	count is nonzero, C<ev_run> will not return on its own.
597	a watcher you never unregister that should not keep C<ev_loop> from	984
598	returning, ev_unref() after starting, and ev_ref() before stopping it. For	985	This is useful when you have a watcher that you never intend to
		986	unregister, but that nevertheless should not keep C<ev_run> from
		987	returning. In such a case, call C<ev_unref> after starting, and C<ev_ref>
		988	before stopping it.
		989
599	example, libev itself uses this for its internal signal pipe: It is not	990	As an example, libev itself uses this for its internal signal pipe: It
600	visible to the libev user and should not keep C<ev_loop> from exiting if	991	is not visible to the libev user and should not keep C<ev_run> from
601	no event watchers registered by it are active. It is also an excellent	992	exiting if no event watchers registered by it are active. It is also an
602	way to do this for generic recurring timers or from within third-party	993	excellent way to do this for generic recurring timers or from within
603	libraries. Just remember to I<unref after start> and I<ref before stop>.	994	third-party libraries. Just remember to I<unref after start> and I<ref
		995	before stop> (but only if the watcher wasn't active before, or was active
		996	before, respectively. Note also that libev might stop watchers itself
		997	(e.g. non-repeating timers) in which case you have to C<ev_ref>
		998	in the callback).
604		999
605	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	1000	Example: Create a signal watcher, but keep it from keeping C<ev_run>
606	running when nothing else is active.	1001	running when nothing else is active.
607		1002
608	struct ev_signal exitsig;	1003	ev_signal exitsig;
609	ev_signal_init (&exitsig, sig_cb, SIGINT);	1004	ev_signal_init (&exitsig, sig_cb, SIGINT);
610	ev_signal_start (loop, &exitsig);	1005	ev_signal_start (loop, &exitsig);
611	evf_unref (loop);	1006	ev_unref (loop);
612		1007
613	Example: For some weird reason, unregister the above signal handler again.	1008	Example: For some weird reason, unregister the above signal handler again.
614		1009
615	ev_ref (loop);	1010	ev_ref (loop);
616	ev_signal_stop (loop, &exitsig);	1011	ev_signal_stop (loop, &exitsig);
617		1012
618	=item ev_set_io_collect_interval (loop, ev_tstamp interval)	1013	=item ev_set_io_collect_interval (loop, ev_tstamp interval)
619		1014
620	=item ev_set_timeout_collect_interval (loop, ev_tstamp interval)	1015	=item ev_set_timeout_collect_interval (loop, ev_tstamp interval)
621		1016
622	These advanced functions influence the time that libev will spend waiting	1017	These advanced functions influence the time that libev will spend waiting
623	for events. Both are by default C<0>, meaning that libev will try to	1018	for events. Both time intervals are by default C<0>, meaning that libev
624	invoke timer/periodic callbacks and I/O callbacks with minimum latency.	1019	will try to invoke timer/periodic callbacks and I/O callbacks with minimum
		1020	latency.
625		1021
626	Setting these to a higher value (the C<interval> I<must> be >= C<0>)	1022	Setting these to a higher value (the C<interval> I<must> be >= C<0>)
627	allows libev to delay invocation of I/O and timer/periodic callbacks to	1023	allows libev to delay invocation of I/O and timer/periodic callbacks
628	increase efficiency of loop iterations.	1024	to increase efficiency of loop iterations (or to increase power-saving
		1025	opportunities).
629		1026
630	The background is that sometimes your program runs just fast enough to	1027	The idea is that sometimes your program runs just fast enough to handle
631	handle one (or very few) event(s) per loop iteration. While this makes	1028	one (or very few) event(s) per loop iteration. While this makes the
632	the program responsive, it also wastes a lot of CPU time to poll for new	1029	program responsive, it also wastes a lot of CPU time to poll for new
633	events, especially with backends like C<select ()> which have a high	1030	events, especially with backends like C<select ()> which have a high
634	overhead for the actual polling but can deliver many events at once.	1031	overhead for the actual polling but can deliver many events at once.
635		1032
636	By setting a higher I<io collect interval> you allow libev to spend more	1033	By setting a higher I<io collect interval> you allow libev to spend more
637	time collecting I/O events, so you can handle more events per iteration,	1034	time collecting I/O events, so you can handle more events per iteration,
638	at the cost of increasing latency. Timeouts (both C<ev_periodic> and	1035	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
639	C<ev_timer>) will be not affected. Setting this to a non-null value will	1036	C<ev_timer>) will not be affected. Setting this to a non-null value will
640	introduce an additional C<ev_sleep ()> call into most loop iterations.	1037	introduce an additional C<ev_sleep ()> call into most loop iterations. The
		1038	sleep time ensures that libev will not poll for I/O events more often then
		1039	once per this interval, on average (as long as the host time resolution is
		1040	good enough).
641		1041
642	Likewise, by setting a higher I<timeout collect interval> you allow libev	1042	Likewise, by setting a higher I<timeout collect interval> you allow libev
643	to spend more time collecting timeouts, at the expense of increased	1043	to spend more time collecting timeouts, at the expense of increased
644	latency (the watcher callback will be called later). C<ev_io> watchers	1044	latency/jitter/inexactness (the watcher callback will be called
645	will not be affected. Setting this to a non-null value will not introduce	1045	later). C<ev_io> watchers will not be affected. Setting this to a non-null
646	any overhead in libev.	1046	value will not introduce any overhead in libev.
647		1047
648	Many (busy) programs can usually benefit by setting the io collect	1048	Many (busy) programs can usually benefit by setting the I/O collect
649	interval to a value near C<0.1> or so, which is often enough for	1049	interval to a value near C<0.1> or so, which is often enough for
650	interactive servers (of course not for games), likewise for timeouts. It	1050	interactive servers (of course not for games), likewise for timeouts. It
651	usually doesn't make much sense to set it to a lower value than C<0.01>,	1051	usually doesn't make much sense to set it to a lower value than C<0.01>,
652	as this approsaches the timing granularity of most systems.	1052	as this approaches the timing granularity of most systems. Note that if
		1053	you do transactions with the outside world and you can't increase the
		1054	parallelity, then this setting will limit your transaction rate (if you
		1055	need to poll once per transaction and the I/O collect interval is 0.01,
		1056	then you can't do more than 100 transactions per second).
		1057
		1058	Setting the I<timeout collect interval> can improve the opportunity for
		1059	saving power, as the program will "bundle" timer callback invocations that
		1060	are "near" in time together, by delaying some, thus reducing the number of
		1061	times the process sleeps and wakes up again. Another useful technique to
		1062	reduce iterations/wake-ups is to use C<ev_periodic> watchers and make sure
		1063	they fire on, say, one-second boundaries only.
		1064
		1065	Example: we only need 0.1s timeout granularity, and we wish not to poll
		1066	more often than 100 times per second:
		1067
		1068	ev_set_timeout_collect_interval (EV_DEFAULT_UC_ 0.1);
		1069	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);
		1070
		1071	=item ev_invoke_pending (loop)
		1072
		1073	This call will simply invoke all pending watchers while resetting their
		1074	pending state. Normally, C<ev_run> does this automatically when required,
		1075	but when overriding the invoke callback this call comes handy. This
		1076	function can be invoked from a watcher - this can be useful for example
		1077	when you want to do some lengthy calculation and want to pass further
		1078	event handling to another thread (you still have to make sure only one
		1079	thread executes within C<ev_invoke_pending> or C<ev_run> of course).
		1080
		1081	=item int ev_pending_count (loop)
		1082
		1083	Returns the number of pending watchers - zero indicates that no watchers
		1084	are pending.
		1085
		1086	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))
		1087
		1088	This overrides the invoke pending functionality of the loop: Instead of
		1089	invoking all pending watchers when there are any, C<ev_run> will call
		1090	this callback instead. This is useful, for example, when you want to
		1091	invoke the actual watchers inside another context (another thread etc.).
		1092
		1093	If you want to reset the callback, use C<ev_invoke_pending> as new
		1094	callback.
		1095
		1096	=item ev_set_loop_release_cb (loop, void (*release)(EV_P) throw (), void (*acquire)(EV_P) throw ())
		1097
		1098	Sometimes you want to share the same loop between multiple threads. This
		1099	can be done relatively simply by putting mutex_lock/unlock calls around
		1100	each call to a libev function.
		1101
		1102	However, C<ev_run> can run an indefinite time, so it is not feasible
		1103	to wait for it to return. One way around this is to wake up the event
		1104	loop via C<ev_break> and C<ev_async_send>, another way is to set these
		1105	I<release> and I<acquire> callbacks on the loop.
		1106
		1107	When set, then C<release> will be called just before the thread is
		1108	suspended waiting for new events, and C<acquire> is called just
		1109	afterwards.
		1110
		1111	Ideally, C<release> will just call your mutex_unlock function, and
		1112	C<acquire> will just call the mutex_lock function again.
		1113
		1114	While event loop modifications are allowed between invocations of
		1115	C<release> and C<acquire> (that's their only purpose after all), no
		1116	modifications done will affect the event loop, i.e. adding watchers will
		1117	have no effect on the set of file descriptors being watched, or the time
		1118	waited. Use an C<ev_async> watcher to wake up C<ev_run> when you want it
		1119	to take note of any changes you made.
		1120
		1121	In theory, threads executing C<ev_run> will be async-cancel safe between
		1122	invocations of C<release> and C<acquire>.
		1123
		1124	See also the locking example in the C<THREADS> section later in this
		1125	document.
		1126
		1127	=item ev_set_userdata (loop, void *data)
		1128
		1129	=item void *ev_userdata (loop)
		1130
		1131	Set and retrieve a single C<void *> associated with a loop. When
		1132	C<ev_set_userdata> has never been called, then C<ev_userdata> returns
		1133	C<0>.
		1134
		1135	These two functions can be used to associate arbitrary data with a loop,
		1136	and are intended solely for the C<invoke_pending_cb>, C<release> and
		1137	C<acquire> callbacks described above, but of course can be (ab-)used for
		1138	any other purpose as well.
		1139
		1140	=item ev_verify (loop)
		1141
		1142	This function only does something when C<EV_VERIFY> support has been
		1143	compiled in, which is the default for non-minimal builds. It tries to go
		1144	through all internal structures and checks them for validity. If anything
		1145	is found to be inconsistent, it will print an error message to standard
		1146	error and call C<abort ()>.
		1147
		1148	This can be used to catch bugs inside libev itself: under normal
		1149	circumstances, this function will never abort as of course libev keeps its
		1150	data structures consistent.
653		1151
654	=back	1152	=back
655		1153
656		1154
657	=head1 ANATOMY OF A WATCHER	1155	=head1 ANATOMY OF A WATCHER
658		1156
		1157	In the following description, uppercase C<TYPE> in names stands for the
		1158	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer
		1159	watchers and C<ev_io_start> for I/O watchers.
		1160
659	A watcher is a structure that you create and register to record your	1161	A watcher is an opaque structure that you allocate and register to record
660	interest in some event. For instance, if you want to wait for STDIN to	1162	your interest in some event. To make a concrete example, imagine you want
661	become readable, you would create an C<ev_io> watcher for that:	1163	to wait for STDIN to become readable, you would create an C<ev_io> watcher
		1164	for that:
662		1165
663	static void my_cb (struct ev_loop *loop, struct ev_io *w, int revents)	1166	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)
664	{	1167	{
665	ev_io_stop (w);	1168	ev_io_stop (w);
666	ev_unloop (loop, EVUNLOOP_ALL);	1169	ev_break (loop, EVBREAK_ALL);
667	}	1170	}
668		1171
669	struct ev_loop *loop = ev_default_loop (0);	1172	struct ev_loop *loop = ev_default_loop (0);
		1173
670	struct ev_io stdin_watcher;	1174	ev_io stdin_watcher;
		1175
671	ev_init (&stdin_watcher, my_cb);	1176	ev_init (&stdin_watcher, my_cb);
672	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);	1177	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
673	ev_io_start (loop, &stdin_watcher);	1178	ev_io_start (loop, &stdin_watcher);
		1179
674	ev_loop (loop, 0);	1180	ev_run (loop, 0);
675		1181
676	As you can see, you are responsible for allocating the memory for your	1182	As you can see, you are responsible for allocating the memory for your
677	watcher structures (and it is usually a bad idea to do this on the stack,	1183	watcher structures (and it is I<usually> a bad idea to do this on the
678	although this can sometimes be quite valid).	1184	stack).
679		1185
		1186	Each watcher has an associated watcher structure (called C<struct ev_TYPE>
		1187	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).
		1188
680	Each watcher structure must be initialised by a call to C<ev_init	1189	Each watcher structure must be initialised by a call to C<ev_init (watcher
681	(watcher *, callback)>, which expects a callback to be provided. This	1190	*, callback)>, which expects a callback to be provided. This callback is
682	callback gets invoked each time the event occurs (or, in the case of io	1191	invoked each time the event occurs (or, in the case of I/O watchers, each
683	watchers, each time the event loop detects that the file descriptor given	1192	time the event loop detects that the file descriptor given is readable
684	is readable and/or writable).	1193	and/or writable).
685		1194
686	Each watcher type has its own C<< ev_<type>_set (watcher *, ...) >> macro	1195	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>
687	with arguments specific to this watcher type. There is also a macro	1196	macro to configure it, with arguments specific to the watcher type. There
688	to combine initialisation and setting in one call: C<< ev_<type>_init	1197	is also a macro to combine initialisation and setting in one call: C<<
689	(watcher *, callback, ...) >>.	1198	ev_TYPE_init (watcher *, callback, ...) >>.
690		1199
691	To make the watcher actually watch out for events, you have to start it	1200	To make the watcher actually watch out for events, you have to start it
692	with a watcher-specific start function (C<< ev_<type>_start (loop, watcher	1201	with a watcher-specific start function (C<< ev_TYPE_start (loop, watcher
693	*) >>), and you can stop watching for events at any time by calling the	1202	*) >>), and you can stop watching for events at any time by calling the
694	corresponding stop function (C<< ev_<type>_stop (loop, watcher *) >>.	1203	corresponding stop function (C<< ev_TYPE_stop (loop, watcher *) >>.
695		1204
696	As long as your watcher is active (has been started but not stopped) you	1205	As long as your watcher is active (has been started but not stopped) you
697	must not touch the values stored in it. Most specifically you must never	1206	must not touch the values stored in it. Most specifically you must never
698	reinitialise it or call its C<set> macro.	1207	reinitialise it or call its C<ev_TYPE_set> macro.
699		1208
700	Each and every callback receives the event loop pointer as first, the	1209	Each and every callback receives the event loop pointer as first, the
701	registered watcher structure as second, and a bitset of received events as	1210	registered watcher structure as second, and a bitset of received events as
702	third argument.	1211	third argument.
703		1212
…		…
712	=item C<EV_WRITE>	1221	=item C<EV_WRITE>
713		1222
714	The file descriptor in the C<ev_io> watcher has become readable and/or	1223	The file descriptor in the C<ev_io> watcher has become readable and/or
715	writable.	1224	writable.
716		1225
717	=item C<EV_TIMEOUT>	1226	=item C<EV_TIMER>
718		1227
719	The C<ev_timer> watcher has timed out.	1228	The C<ev_timer> watcher has timed out.
720		1229
721	=item C<EV_PERIODIC>	1230	=item C<EV_PERIODIC>
722		1231
…		…
740		1249
741	=item C<EV_PREPARE>	1250	=item C<EV_PREPARE>
742		1251
743	=item C<EV_CHECK>	1252	=item C<EV_CHECK>
744		1253
745	All C<ev_prepare> watchers are invoked just I<before> C<ev_loop> starts	1254	All C<ev_prepare> watchers are invoked just I<before> C<ev_run> starts to
746	to gather new events, and all C<ev_check> watchers are invoked just after	1255	gather new events, and all C<ev_check> watchers are queued (not invoked)
747	C<ev_loop> has gathered them, but before it invokes any callbacks for any	1256	just after C<ev_run> has gathered them, but before it queues any callbacks
		1257	for any received events. That means C<ev_prepare> watchers are the last
		1258	watchers invoked before the event loop sleeps or polls for new events, and
		1259	C<ev_check> watchers will be invoked before any other watchers of the same
		1260	or lower priority within an event loop iteration.
		1261
748	received events. Callbacks of both watcher types can start and stop as	1262	Callbacks of both watcher types can start and stop as many watchers as
749	many watchers as they want, and all of them will be taken into account	1263	they want, and all of them will be taken into account (for example, a
750	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	1264	C<ev_prepare> watcher might start an idle watcher to keep C<ev_run> from
751	C<ev_loop> from blocking).	1265	blocking).
752		1266
753	=item C<EV_EMBED>	1267	=item C<EV_EMBED>
754		1268
755	The embedded event loop specified in the C<ev_embed> watcher needs attention.	1269	The embedded event loop specified in the C<ev_embed> watcher needs attention.
756		1270
757	=item C<EV_FORK>	1271	=item C<EV_FORK>
758		1272
759	The event loop has been resumed in the child process after fork (see	1273	The event loop has been resumed in the child process after fork (see
760	C<ev_fork>).	1274	C<ev_fork>).
761		1275
		1276	=item C<EV_CLEANUP>
		1277
		1278	The event loop is about to be destroyed (see C<ev_cleanup>).
		1279
		1280	=item C<EV_ASYNC>
		1281
		1282	The given async watcher has been asynchronously notified (see C<ev_async>).
		1283
		1284	=item C<EV_CUSTOM>
		1285
		1286	Not ever sent (or otherwise used) by libev itself, but can be freely used
		1287	by libev users to signal watchers (e.g. via C<ev_feed_event>).
		1288
762	=item C<EV_ERROR>	1289	=item C<EV_ERROR>
763		1290
764	An unspecified error has occured, the watcher has been stopped. This might	1291	An unspecified error has occurred, the watcher has been stopped. This might
765	happen because the watcher could not be properly started because libev	1292	happen because the watcher could not be properly started because libev
766	ran out of memory, a file descriptor was found to be closed or any other	1293	ran out of memory, a file descriptor was found to be closed or any other
		1294	problem. Libev considers these application bugs.
		1295
767	problem. You best act on it by reporting the problem and somehow coping	1296	You best act on it by reporting the problem and somehow coping with the
768	with the watcher being stopped.	1297	watcher being stopped. Note that well-written programs should not receive
		1298	an error ever, so when your watcher receives it, this usually indicates a
		1299	bug in your program.
769		1300
770	Libev will usually signal a few "dummy" events together with an error,	1301	Libev will usually signal a few "dummy" events together with an error, for
771	for example it might indicate that a fd is readable or writable, and if	1302	example it might indicate that a fd is readable or writable, and if your
772	your callbacks is well-written it can just attempt the operation and cope	1303	callbacks is well-written it can just attempt the operation and cope with
773	with the error from read() or write(). This will not work in multithreaded	1304	the error from read() or write(). This will not work in multi-threaded
774	programs, though, so beware.	1305	programs, though, as the fd could already be closed and reused for another
		1306	thing, so beware.
775		1307
776	=back	1308	=back
777		1309
778	=head2 GENERIC WATCHER FUNCTIONS	1310	=head2 GENERIC WATCHER FUNCTIONS
779
780	In the following description, C<TYPE> stands for the watcher type,
781	e.g. C<timer> for C<ev_timer> watchers and C<io> for C<ev_io> watchers.
782		1311
783	=over 4	1312	=over 4
784		1313
785	=item C<ev_init> (ev_TYPE *watcher, callback)	1314	=item C<ev_init> (ev_TYPE *watcher, callback)
786		1315
…		…
792	which rolls both calls into one.	1321	which rolls both calls into one.
793		1322
794	You can reinitialise a watcher at any time as long as it has been stopped	1323	You can reinitialise a watcher at any time as long as it has been stopped
795	(or never started) and there are no pending events outstanding.	1324	(or never started) and there are no pending events outstanding.
796		1325
797	The callback is always of type C<void (*)(ev_loop *loop, ev_TYPE *watcher,	1326	The callback is always of type C<void (*)(struct ev_loop *loop, ev_TYPE *watcher,
798	int revents)>.	1327	int revents)>.
799		1328
		1329	Example: Initialise an C<ev_io> watcher in two steps.
		1330
		1331	ev_io w;
		1332	ev_init (&w, my_cb);
		1333	ev_io_set (&w, STDIN_FILENO, EV_READ);
		1334
800	=item C<ev_TYPE_set> (ev_TYPE *, [args])	1335	=item C<ev_TYPE_set> (ev_TYPE *watcher, [args])
801		1336
802	This macro initialises the type-specific parts of a watcher. You need to	1337	This macro initialises the type-specific parts of a watcher. You need to
803	call C<ev_init> at least once before you call this macro, but you can	1338	call C<ev_init> at least once before you call this macro, but you can
804	call C<ev_TYPE_set> any number of times. You must not, however, call this	1339	call C<ev_TYPE_set> any number of times. You must not, however, call this
805	macro on a watcher that is active (it can be pending, however, which is a	1340	macro on a watcher that is active (it can be pending, however, which is a
806	difference to the C<ev_init> macro).	1341	difference to the C<ev_init> macro).
807		1342
808	Although some watcher types do not have type-specific arguments	1343	Although some watcher types do not have type-specific arguments
809	(e.g. C<ev_prepare>) you still need to call its C<set> macro.	1344	(e.g. C<ev_prepare>) you still need to call its C<set> macro.
810		1345
		1346	See C<ev_init>, above, for an example.
		1347
811	=item C<ev_TYPE_init> (ev_TYPE *watcher, callback, [args])	1348	=item C<ev_TYPE_init> (ev_TYPE *watcher, callback, [args])
812		1349
813	This convinience macro rolls both C<ev_init> and C<ev_TYPE_set> macro	1350	This convenience macro rolls both C<ev_init> and C<ev_TYPE_set> macro
814	calls into a single call. This is the most convinient method to initialise	1351	calls into a single call. This is the most convenient method to initialise
815	a watcher. The same limitations apply, of course.	1352	a watcher. The same limitations apply, of course.
816		1353
		1354	Example: Initialise and set an C<ev_io> watcher in one step.
		1355
		1356	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);
		1357
817	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)	1358	=item C<ev_TYPE_start> (loop, ev_TYPE *watcher)
818		1359
819	Starts (activates) the given watcher. Only active watchers will receive	1360	Starts (activates) the given watcher. Only active watchers will receive
820	events. If the watcher is already active nothing will happen.	1361	events. If the watcher is already active nothing will happen.
821		1362
		1363	Example: Start the C<ev_io> watcher that is being abused as example in this
		1364	whole section.
		1365
		1366	ev_io_start (EV_DEFAULT_UC, &w);
		1367
822	=item C<ev_TYPE_stop> (loop *, ev_TYPE *watcher)	1368	=item C<ev_TYPE_stop> (loop, ev_TYPE *watcher)
823		1369
824	Stops the given watcher again (if active) and clears the pending	1370	Stops the given watcher if active, and clears the pending status (whether
		1371	the watcher was active or not).
		1372
825	status. It is possible that stopped watchers are pending (for example,	1373	It is possible that stopped watchers are pending - for example,
826	non-repeating timers are being stopped when they become pending), but	1374	non-repeating timers are being stopped when they become pending - but
827	C<ev_TYPE_stop> ensures that the watcher is neither active nor pending. If	1375	calling C<ev_TYPE_stop> ensures that the watcher is neither active nor
828	you want to free or reuse the memory used by the watcher it is therefore a	1376	pending. If you want to free or reuse the memory used by the watcher it is
829	good idea to always call its C<ev_TYPE_stop> function.	1377	therefore a good idea to always call its C<ev_TYPE_stop> function.
830		1378
831	=item bool ev_is_active (ev_TYPE *watcher)	1379	=item bool ev_is_active (ev_TYPE *watcher)
832		1380
833	Returns a true value iff the watcher is active (i.e. it has been started	1381	Returns a true value iff the watcher is active (i.e. it has been started
834	and not yet been stopped). As long as a watcher is active you must not modify	1382	and not yet been stopped). As long as a watcher is active you must not modify
…		…
845		1393
846	=item callback ev_cb (ev_TYPE *watcher)	1394	=item callback ev_cb (ev_TYPE *watcher)
847		1395
848	Returns the callback currently set on the watcher.	1396	Returns the callback currently set on the watcher.
849		1397
850	=item ev_cb_set (ev_TYPE *watcher, callback)	1398	=item ev_set_cb (ev_TYPE *watcher, callback)
851		1399
852	Change the callback. You can change the callback at virtually any time	1400	Change the callback. You can change the callback at virtually any time
853	(modulo threads).	1401	(modulo threads).
854		1402
855	=item ev_set_priority (ev_TYPE *watcher, priority)	1403	=item ev_set_priority (ev_TYPE *watcher, int priority)
856		1404
857	=item int ev_priority (ev_TYPE *watcher)	1405	=item int ev_priority (ev_TYPE *watcher)
858		1406
859	Set and query the priority of the watcher. The priority is a small	1407	Set and query the priority of the watcher. The priority is a small
860	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>	1408	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
861	(default: C<-2>). Pending watchers with higher priority will be invoked	1409	(default: C<-2>). Pending watchers with higher priority will be invoked
862	before watchers with lower priority, but priority will not keep watchers	1410	before watchers with lower priority, but priority will not keep watchers
863	from being executed (except for C<ev_idle> watchers).	1411	from being executed (except for C<ev_idle> watchers).
864		1412
865	This means that priorities are I<only> used for ordering callback
866	invocation after new events have been received. This is useful, for
867	example, to reduce latency after idling, or more often, to bind two
868	watchers on the same event and make sure one is called first.
869
870	If you need to suppress invocation when higher priority events are pending	1413	If you need to suppress invocation when higher priority events are pending
871	you need to look at C<ev_idle> watchers, which provide this functionality.	1414	you need to look at C<ev_idle> watchers, which provide this functionality.
872		1415
873	You I<must not> change the priority of a watcher as long as it is active or	1416	You I<must not> change the priority of a watcher as long as it is active or
874	pending.	1417	pending.
875		1418
		1419	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is
		1420	fine, as long as you do not mind that the priority value you query might
		1421	or might not have been clamped to the valid range.
		1422
876	The default priority used by watchers when no priority has been set is	1423	The default priority used by watchers when no priority has been set is
877	always C<0>, which is supposed to not be too high and not be too low :).	1424	always C<0>, which is supposed to not be too high and not be too low :).
878		1425
879	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is	1426	See L</WATCHER PRIORITY MODELS>, below, for a more thorough treatment of
880	fine, as long as you do not mind that the priority value you query might	1427	priorities.
881	or might not have been adjusted to be within valid range.
882		1428
883	=item ev_invoke (loop, ev_TYPE *watcher, int revents)	1429	=item ev_invoke (loop, ev_TYPE *watcher, int revents)
884		1430
885	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither	1431	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
886	C<loop> nor C<revents> need to be valid as long as the watcher callback	1432	C<loop> nor C<revents> need to be valid as long as the watcher callback
887	can deal with that fact.	1433	can deal with that fact, as both are simply passed through to the
		1434	callback.
888		1435
889	=item int ev_clear_pending (loop, ev_TYPE *watcher)	1436	=item int ev_clear_pending (loop, ev_TYPE *watcher)
890		1437
891	If the watcher is pending, this function returns clears its pending status	1438	If the watcher is pending, this function clears its pending status and
892	and returns its C<revents> bitset (as if its callback was invoked). If the	1439	returns its C<revents> bitset (as if its callback was invoked). If the
893	watcher isn't pending it does nothing and returns C<0>.	1440	watcher isn't pending it does nothing and returns C<0>.
894		1441
		1442	Sometimes it can be useful to "poll" a watcher instead of waiting for its
		1443	callback to be invoked, which can be accomplished with this function.
		1444
		1445	=item ev_feed_event (loop, ev_TYPE *watcher, int revents)
		1446
		1447	Feeds the given event set into the event loop, as if the specified event
		1448	had happened for the specified watcher (which must be a pointer to an
		1449	initialised but not necessarily started event watcher). Obviously you must
		1450	not free the watcher as long as it has pending events.
		1451
		1452	Stopping the watcher, letting libev invoke it, or calling
		1453	C<ev_clear_pending> will clear the pending event, even if the watcher was
		1454	not started in the first place.
		1455
		1456	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
		1457	functions that do not need a watcher.
		1458
895	=back	1459	=back
896		1460
		1461	See also the L</ASSOCIATING CUSTOM DATA WITH A WATCHER> and L</BUILDING YOUR
		1462	OWN COMPOSITE WATCHERS> idioms.
897		1463
898	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	1464	=head2 WATCHER STATES
899		1465
900	Each watcher has, by default, a member C<void *data> that you can change	1466	There are various watcher states mentioned throughout this manual -
901	and read at any time, libev will completely ignore it. This can be used	1467	active, pending and so on. In this section these states and the rules to
902	to associate arbitrary data with your watcher. If you need more data and	1468	transition between them will be described in more detail - and while these
903	don't want to allocate memory and store a pointer to it in that data	1469	rules might look complicated, they usually do "the right thing".
904	member, you can also "subclass" the watcher type and provide your own
905	data:
906		1470
907	struct my_io	1471	=over 4
908	{
909	struct ev_io io;
910	int otherfd;
911	void *somedata;
912	struct whatever *mostinteresting;
913	}
914		1472
915	And since your callback will be called with a pointer to the watcher, you	1473	=item initialised
916	can cast it back to your own type:
917		1474
918	static void my_cb (struct ev_loop *loop, struct ev_io *w_, int revents)	1475	Before a watcher can be registered with the event loop it has to be
919	{	1476	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
920	struct my_io *w = (struct my_io *)w_;	1477	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
921	...
922	}
923		1478
924	More interesting and less C-conformant ways of casting your callback type	1479	In this state it is simply some block of memory that is suitable for
925	instead have been omitted.	1480	use in an event loop. It can be moved around, freed, reused etc. at
		1481	will - as long as you either keep the memory contents intact, or call
		1482	C<ev_TYPE_init> again.
926		1483
927	Another common scenario is having some data structure with multiple	1484	=item started/running/active
928	watchers:
929		1485
930	struct my_biggy	1486	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
931	{	1487	property of the event loop, and is actively waiting for events. While in
932	int some_data;	1488	this state it cannot be accessed (except in a few documented ways), moved,
933	ev_timer t1;	1489	freed or anything else - the only legal thing is to keep a pointer to it,
934	ev_timer t2;	1490	and call libev functions on it that are documented to work on active watchers.
935	}
936		1491
937	In this case getting the pointer to C<my_biggy> is a bit more complicated,	1492	=item pending
938	you need to use C<offsetof>:
939		1493
940	#include <stddef.h>	1494	If a watcher is active and libev determines that an event it is interested
		1495	in has occurred (such as a timer expiring), it will become pending. It will
		1496	stay in this pending state until either it is stopped or its callback is
		1497	about to be invoked, so it is not normally pending inside the watcher
		1498	callback.
941		1499
		1500	The watcher might or might not be active while it is pending (for example,
		1501	an expired non-repeating timer can be pending but no longer active). If it
		1502	is stopped, it can be freely accessed (e.g. by calling C<ev_TYPE_set>),
		1503	but it is still property of the event loop at this time, so cannot be
		1504	moved, freed or reused. And if it is active the rules described in the
		1505	previous item still apply.
		1506
		1507	It is also possible to feed an event on a watcher that is not active (e.g.
		1508	via C<ev_feed_event>), in which case it becomes pending without being
		1509	active.
		1510
		1511	=item stopped
		1512
		1513	A watcher can be stopped implicitly by libev (in which case it might still
		1514	be pending), or explicitly by calling its C<ev_TYPE_stop> function. The
		1515	latter will clear any pending state the watcher might be in, regardless
		1516	of whether it was active or not, so stopping a watcher explicitly before
		1517	freeing it is often a good idea.
		1518
		1519	While stopped (and not pending) the watcher is essentially in the
		1520	initialised state, that is, it can be reused, moved, modified in any way
		1521	you wish (but when you trash the memory block, you need to C<ev_TYPE_init>
		1522	it again).
		1523
		1524	=back
		1525
		1526	=head2 WATCHER PRIORITY MODELS
		1527
		1528	Many event loops support I<watcher priorities>, which are usually small
		1529	integers that influence the ordering of event callback invocation
		1530	between watchers in some way, all else being equal.
		1531
		1532	In libev, Watcher priorities can be set using C<ev_set_priority>. See its
		1533	description for the more technical details such as the actual priority
		1534	range.
		1535
		1536	There are two common ways how these these priorities are being interpreted
		1537	by event loops:
		1538
		1539	In the more common lock-out model, higher priorities "lock out" invocation
		1540	of lower priority watchers, which means as long as higher priority
		1541	watchers receive events, lower priority watchers are not being invoked.
		1542
		1543	The less common only-for-ordering model uses priorities solely to order
		1544	callback invocation within a single event loop iteration: Higher priority
		1545	watchers are invoked before lower priority ones, but they all get invoked
		1546	before polling for new events.
		1547
		1548	Libev uses the second (only-for-ordering) model for all its watchers
		1549	except for idle watchers (which use the lock-out model).
		1550
		1551	The rationale behind this is that implementing the lock-out model for
		1552	watchers is not well supported by most kernel interfaces, and most event
		1553	libraries will just poll for the same events again and again as long as
		1554	their callbacks have not been executed, which is very inefficient in the
		1555	common case of one high-priority watcher locking out a mass of lower
		1556	priority ones.
		1557
		1558	Static (ordering) priorities are most useful when you have two or more
		1559	watchers handling the same resource: a typical usage example is having an
		1560	C<ev_io> watcher to receive data, and an associated C<ev_timer> to handle
		1561	timeouts. Under load, data might be received while the program handles
		1562	other jobs, but since timers normally get invoked first, the timeout
		1563	handler will be executed before checking for data. In that case, giving
		1564	the timer a lower priority than the I/O watcher ensures that I/O will be
		1565	handled first even under adverse conditions (which is usually, but not
		1566	always, what you want).
		1567
		1568	Since idle watchers use the "lock-out" model, meaning that idle watchers
		1569	will only be executed when no same or higher priority watchers have
		1570	received events, they can be used to implement the "lock-out" model when
		1571	required.
		1572
		1573	For example, to emulate how many other event libraries handle priorities,
		1574	you can associate an C<ev_idle> watcher to each such watcher, and in
		1575	the normal watcher callback, you just start the idle watcher. The real
		1576	processing is done in the idle watcher callback. This causes libev to
		1577	continuously poll and process kernel event data for the watcher, but when
		1578	the lock-out case is known to be rare (which in turn is rare :), this is
		1579	workable.
		1580
		1581	Usually, however, the lock-out model implemented that way will perform
		1582	miserably under the type of load it was designed to handle. In that case,
		1583	it might be preferable to stop the real watcher before starting the
		1584	idle watcher, so the kernel will not have to process the event in case
		1585	the actual processing will be delayed for considerable time.
		1586
		1587	Here is an example of an I/O watcher that should run at a strictly lower
		1588	priority than the default, and which should only process data when no
		1589	other events are pending:
		1590
		1591	ev_idle idle; // actual processing watcher
		1592	ev_io io; // actual event watcher
		1593
942	static void	1594	static void
943	t1_cb (EV_P_ struct ev_timer *w, int revents)	1595	io_cb (EV_P_ ev_io *w, int revents)
944	{	1596	{
945	struct my_biggy big = (struct my_biggy *	1597	// stop the I/O watcher, we received the event, but
946	(((char *)w) - offsetof (struct my_biggy, t1));	1598	// are not yet ready to handle it.
		1599	ev_io_stop (EV_A_ w);
		1600
		1601	// start the idle watcher to handle the actual event.
		1602	// it will not be executed as long as other watchers
		1603	// with the default priority are receiving events.
		1604	ev_idle_start (EV_A_ &idle);
947	}	1605	}
948		1606
949	static void	1607	static void
950	t2_cb (EV_P_ struct ev_timer *w, int revents)	1608	idle_cb (EV_P_ ev_idle *w, int revents)
951	{	1609	{
952	struct my_biggy big = (struct my_biggy *	1610	// actual processing
953	(((char *)w) - offsetof (struct my_biggy, t2));	1611	read (STDIN_FILENO, ...);
		1612
		1613	// have to start the I/O watcher again, as
		1614	// we have handled the event
		1615	ev_io_start (EV_P_ &io);
954	}	1616	}
		1617
		1618	// initialisation
		1619	ev_idle_init (&idle, idle_cb);
		1620	ev_io_init (&io, io_cb, STDIN_FILENO, EV_READ);
		1621	ev_io_start (EV_DEFAULT_ &io);
		1622
		1623	In the "real" world, it might also be beneficial to start a timer, so that
		1624	low-priority connections can not be locked out forever under load. This
		1625	enables your program to keep a lower latency for important connections
		1626	during short periods of high load, while not completely locking out less
		1627	important ones.
955		1628
956		1629
957	=head1 WATCHER TYPES	1630	=head1 WATCHER TYPES
958		1631
959	This section describes each watcher in detail, but will not repeat	1632	This section describes each watcher in detail, but will not repeat
…		…
983	In general you can register as many read and/or write event watchers per	1656	In general you can register as many read and/or write event watchers per
984	fd as you want (as long as you don't confuse yourself). Setting all file	1657	fd as you want (as long as you don't confuse yourself). Setting all file
985	descriptors to non-blocking mode is also usually a good idea (but not	1658	descriptors to non-blocking mode is also usually a good idea (but not
986	required if you know what you are doing).	1659	required if you know what you are doing).
987		1660
988	You have to be careful with dup'ed file descriptors, though. Some backends
989	(the linux epoll backend is a notable example) cannot handle dup'ed file
990	descriptors correctly if you register interest in two or more fds pointing
991	to the same underlying file/socket/etc. description (that is, they share
992	the same underlying "file open").
993
994	If you must do this, then force the use of a known-to-be-good backend
995	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and
996	C<EVBACKEND_POLL>).
997
998	Another thing you have to watch out for is that it is quite easy to	1661	Another thing you have to watch out for is that it is quite easy to
999	receive "spurious" readyness notifications, that is your callback might	1662	receive "spurious" readiness notifications, that is, your callback might
1000	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1663	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
1001	because there is no data. Not only are some backends known to create a	1664	because there is no data. It is very easy to get into this situation even
1002	lot of those (for example solaris ports), it is very easy to get into	1665	with a relatively standard program structure. Thus it is best to always
1003	this situation even with a relatively standard program structure. Thus	1666	use non-blocking I/O: An extra C<read>(2) returning C<EAGAIN> is far
1004	it is best to always use non-blocking I/O: An extra C<read>(2) returning
1005	C<EAGAIN> is far preferable to a program hanging until some data arrives.	1667	preferable to a program hanging until some data arrives.
1006		1668
1007	If you cannot run the fd in non-blocking mode (for example you should not	1669	If you cannot run the fd in non-blocking mode (for example you should
1008	play around with an Xlib connection), then you have to seperately re-test	1670	not play around with an Xlib connection), then you have to separately
1009	whether a file descriptor is really ready with a known-to-be good interface	1671	re-test whether a file descriptor is really ready with a known-to-be good
1010	such as poll (fortunately in our Xlib example, Xlib already does this on	1672	interface such as poll (fortunately in the case of Xlib, it already does
1011	its own, so its quite safe to use).	1673	this on its own, so its quite safe to use). Some people additionally
		1674	use C<SIGALRM> and an interval timer, just to be sure you won't block
		1675	indefinitely.
		1676
		1677	But really, best use non-blocking mode.
1012		1678
1013	=head3 The special problem of disappearing file descriptors	1679	=head3 The special problem of disappearing file descriptors
1014		1680
1015	Some backends (e.g. kqueue, epoll) need to be told about closing a file	1681	Some backends (e.g. kqueue, epoll, linuxaio) need to be told about closing
1016	descriptor (either by calling C<close> explicitly or by any other means,	1682	a file descriptor (either due to calling C<close> explicitly or any other
1017	such as C<dup>). The reason is that you register interest in some file	1683	means, such as C<dup2>). The reason is that you register interest in some
1018	descriptor, but when it goes away, the operating system will silently drop	1684	file descriptor, but when it goes away, the operating system will silently
1019	this interest. If another file descriptor with the same number then is	1685	drop this interest. If another file descriptor with the same number then
1020	registered with libev, there is no efficient way to see that this is, in	1686	is registered with libev, there is no efficient way to see that this is,
1021	fact, a different file descriptor.	1687	in fact, a different file descriptor.
1022		1688
1023	To avoid having to explicitly tell libev about such cases, libev follows	1689	To avoid having to explicitly tell libev about such cases, libev follows
1024	the following policy: Each time C<ev_io_set> is being called, libev	1690	the following policy: Each time C<ev_io_set> is being called, libev
1025	will assume that this is potentially a new file descriptor, otherwise	1691	will assume that this is potentially a new file descriptor, otherwise
1026	it is assumed that the file descriptor stays the same. That means that	1692	it is assumed that the file descriptor stays the same. That means that
…		…
1033		1699
1034	=head3 The special problem of dup'ed file descriptors	1700	=head3 The special problem of dup'ed file descriptors
1035		1701
1036	Some backends (e.g. epoll), cannot register events for file descriptors,	1702	Some backends (e.g. epoll), cannot register events for file descriptors,
1037	but only events for the underlying file descriptions. That means when you	1703	but only events for the underlying file descriptions. That means when you
1038	have C<dup ()>'ed file descriptors and register events for them, only one	1704	have C<dup ()>'ed file descriptors or weirder constellations, and register
1039	file descriptor might actually receive events.	1705	events for them, only one file descriptor might actually receive events.
1040		1706
1041	There is no workaround possible except not registering events	1707	There is no workaround possible except not registering events
1042	for potentially C<dup ()>'ed file descriptors, or to resort to	1708	for potentially C<dup ()>'ed file descriptors, or to resort to
1043	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.	1709	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1044		1710
		1711	=head3 The special problem of files
		1712
		1713	Many people try to use C<select> (or libev) on file descriptors
		1714	representing files, and expect it to become ready when their program
		1715	doesn't block on disk accesses (which can take a long time on their own).
		1716
		1717	However, this cannot ever work in the "expected" way - you get a readiness
		1718	notification as soon as the kernel knows whether and how much data is
		1719	there, and in the case of open files, that's always the case, so you
		1720	always get a readiness notification instantly, and your read (or possibly
		1721	write) will still block on the disk I/O.
		1722
		1723	Another way to view it is that in the case of sockets, pipes, character
		1724	devices and so on, there is another party (the sender) that delivers data
		1725	on its own, but in the case of files, there is no such thing: the disk
		1726	will not send data on its own, simply because it doesn't know what you
		1727	wish to read - you would first have to request some data.
		1728
		1729	Since files are typically not-so-well supported by advanced notification
		1730	mechanism, libev tries hard to emulate POSIX behaviour with respect
		1731	to files, even though you should not use it. The reason for this is
		1732	convenience: sometimes you want to watch STDIN or STDOUT, which is
		1733	usually a tty, often a pipe, but also sometimes files or special devices
		1734	(for example, C<epoll> on Linux works with F</dev/random> but not with
		1735	F</dev/urandom>), and even though the file might better be served with
		1736	asynchronous I/O instead of with non-blocking I/O, it is still useful when
		1737	it "just works" instead of freezing.
		1738
		1739	So avoid file descriptors pointing to files when you know it (e.g. use
		1740	libeio), but use them when it is convenient, e.g. for STDIN/STDOUT, or
		1741	when you rarely read from a file instead of from a socket, and want to
		1742	reuse the same code path.
		1743
1045	=head3 The special problem of fork	1744	=head3 The special problem of fork
1046		1745
1047	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit	1746	Some backends (epoll, kqueue, probably linuxaio) do not support C<fork ()>
1048	useless behaviour. Libev fully supports fork, but needs to be told about	1747	at all or exhibit useless behaviour. Libev fully supports fork, but needs
1049	it in the child.	1748	to be told about it in the child if you want to continue to use it in the
		1749	child.
1050		1750
1051	To support fork in your programs, you either have to call	1751	To support fork in your child processes, you have to call C<ev_loop_fork
1052	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,	1752	()> after a fork in the child, enable C<EVFLAG_FORKCHECK>, or resort to
1053	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or	1753	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1054	C<EVBACKEND_POLL>.
1055		1754
		1755	=head3 The special problem of SIGPIPE
		1756
		1757	While not really specific to libev, it is easy to forget about C<SIGPIPE>:
		1758	when writing to a pipe whose other end has been closed, your program gets
		1759	sent a SIGPIPE, which, by default, aborts your program. For most programs
		1760	this is sensible behaviour, for daemons, this is usually undesirable.
		1761
		1762	So when you encounter spurious, unexplained daemon exits, make sure you
		1763	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
		1764	somewhere, as that would have given you a big clue).
		1765
		1766	=head3 The special problem of accept()ing when you can't
		1767
		1768	Many implementations of the POSIX C<accept> function (for example,
		1769	found in post-2004 Linux) have the peculiar behaviour of not removing a
		1770	connection from the pending queue in all error cases.
		1771
		1772	For example, larger servers often run out of file descriptors (because
		1773	of resource limits), causing C<accept> to fail with C<ENFILE> but not
		1774	rejecting the connection, leading to libev signalling readiness on
		1775	the next iteration again (the connection still exists after all), and
		1776	typically causing the program to loop at 100% CPU usage.
		1777
		1778	Unfortunately, the set of errors that cause this issue differs between
		1779	operating systems, there is usually little the app can do to remedy the
		1780	situation, and no known thread-safe method of removing the connection to
		1781	cope with overload is known (to me).
		1782
		1783	One of the easiest ways to handle this situation is to just ignore it
		1784	- when the program encounters an overload, it will just loop until the
		1785	situation is over. While this is a form of busy waiting, no OS offers an
		1786	event-based way to handle this situation, so it's the best one can do.
		1787
		1788	A better way to handle the situation is to log any errors other than
		1789	C<EAGAIN> and C<EWOULDBLOCK>, making sure not to flood the log with such
		1790	messages, and continue as usual, which at least gives the user an idea of
		1791	what could be wrong ("raise the ulimit!"). For extra points one could stop
		1792	the C<ev_io> watcher on the listening fd "for a while", which reduces CPU
		1793	usage.
		1794
		1795	If your program is single-threaded, then you could also keep a dummy file
		1796	descriptor for overload situations (e.g. by opening F</dev/null>), and
		1797	when you run into C<ENFILE> or C<EMFILE>, close it, run C<accept>,
		1798	close that fd, and create a new dummy fd. This will gracefully refuse
		1799	clients under typical overload conditions.
		1800
		1801	The last way to handle it is to simply log the error and C<exit>, as
		1802	is often done with C<malloc> failures, but this results in an easy
		1803	opportunity for a DoS attack.
1056		1804
1057	=head3 Watcher-Specific Functions	1805	=head3 Watcher-Specific Functions
1058		1806
1059	=over 4	1807	=over 4
1060		1808
1061	=item ev_io_init (ev_io *, callback, int fd, int events)	1809	=item ev_io_init (ev_io *, callback, int fd, int events)
1062		1810
1063	=item ev_io_set (ev_io *, int fd, int events)	1811	=item ev_io_set (ev_io *, int fd, int events)
1064		1812
1065	Configures an C<ev_io> watcher. The C<fd> is the file descriptor to	1813	Configures an C<ev_io> watcher. The C<fd> is the file descriptor to
1066	rceeive events for and events is either C<EV_READ>, C<EV_WRITE> or	1814	receive events for and C<events> is either C<EV_READ>, C<EV_WRITE> or
1067	C<EV_READ | EV_WRITE> to receive the given events.	1815	C<EV_READ | EV_WRITE>, to express the desire to receive the given events.
1068		1816
1069	=item int fd [read-only]	1817	=item int fd [read-only]
1070		1818
1071	The file descriptor being watched.	1819	The file descriptor being watched.
1072		1820
1073	=item int events [read-only]	1821	=item int events [read-only]
1074		1822
1075	The events being watched.	1823	The events being watched.
1076		1824
1077	=back	1825	=back
		1826
		1827	=head3 Examples
1078		1828
1079	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well	1829	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well
1080	readable, but only once. Since it is likely line-buffered, you could	1830	readable, but only once. Since it is likely line-buffered, you could
1081	attempt to read a whole line in the callback.	1831	attempt to read a whole line in the callback.
1082		1832
1083	static void	1833	static void
1084	stdin_readable_cb (struct ev_loop *loop, struct ev_io *w, int revents)	1834	stdin_readable_cb (struct ev_loop *loop, ev_io *w, int revents)
1085	{	1835	{
1086	ev_io_stop (loop, w);	1836	ev_io_stop (loop, w);
1087	.. read from stdin here (or from w->fd) and haqndle any I/O errors	1837	.. read from stdin here (or from w->fd) and handle any I/O errors
1088	}	1838	}
1089		1839
1090	...	1840	...
1091	struct ev_loop *loop = ev_default_init (0);	1841	struct ev_loop *loop = ev_default_init (0);
1092	struct ev_io stdin_readable;	1842	ev_io stdin_readable;
1093	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);	1843	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
1094	ev_io_start (loop, &stdin_readable);	1844	ev_io_start (loop, &stdin_readable);
1095	ev_loop (loop, 0);	1845	ev_run (loop, 0);
1096		1846
1097		1847
1098	=head2 C<ev_timer> - relative and optionally repeating timeouts	1848	=head2 C<ev_timer> - relative and optionally repeating timeouts
1099		1849
1100	Timer watchers are simple relative timers that generate an event after a	1850	Timer watchers are simple relative timers that generate an event after a
1101	given time, and optionally repeating in regular intervals after that.	1851	given time, and optionally repeating in regular intervals after that.
1102		1852
1103	The timers are based on real time, that is, if you register an event that	1853	The timers are based on real time, that is, if you register an event that
1104	times out after an hour and you reset your system clock to last years	1854	times out after an hour and you reset your system clock to January last
1105	time, it will still time out after (roughly) and hour. "Roughly" because	1855	year, it will still time out after (roughly) one hour. "Roughly" because
1106	detecting time jumps is hard, and some inaccuracies are unavoidable (the	1856	detecting time jumps is hard, and some inaccuracies are unavoidable (the
1107	monotonic clock option helps a lot here).	1857	monotonic clock option helps a lot here).
		1858
		1859	The callback is guaranteed to be invoked only I<after> its timeout has
		1860	passed (not I<at>, so on systems with very low-resolution clocks this
		1861	might introduce a small delay, see "the special problem of being too
		1862	early", below). If multiple timers become ready during the same loop
		1863	iteration then the ones with earlier time-out values are invoked before
		1864	ones of the same priority with later time-out values (but this is no
		1865	longer true when a callback calls C<ev_run> recursively).
		1866
		1867	=head3 Be smart about timeouts
		1868
		1869	Many real-world problems involve some kind of timeout, usually for error
		1870	recovery. A typical example is an HTTP request - if the other side hangs,
		1871	you want to raise some error after a while.
		1872
		1873	What follows are some ways to handle this problem, from obvious and
		1874	inefficient to smart and efficient.
		1875
		1876	In the following, a 60 second activity timeout is assumed - a timeout that
		1877	gets reset to 60 seconds each time there is activity (e.g. each time some
		1878	data or other life sign was received).
		1879
		1880	=over 4
		1881
		1882	=item 1. Use a timer and stop, reinitialise and start it on activity.
		1883
		1884	This is the most obvious, but not the most simple way: In the beginning,
		1885	start the watcher:
		1886
		1887	ev_timer_init (timer, callback, 60., 0.);
		1888	ev_timer_start (loop, timer);
		1889
		1890	Then, each time there is some activity, C<ev_timer_stop> it, initialise it
		1891	and start it again:
		1892
		1893	ev_timer_stop (loop, timer);
		1894	ev_timer_set (timer, 60., 0.);
		1895	ev_timer_start (loop, timer);
		1896
		1897	This is relatively simple to implement, but means that each time there is
		1898	some activity, libev will first have to remove the timer from its internal
		1899	data structure and then add it again. Libev tries to be fast, but it's
		1900	still not a constant-time operation.
		1901
		1902	=item 2. Use a timer and re-start it with C<ev_timer_again> inactivity.
		1903
		1904	This is the easiest way, and involves using C<ev_timer_again> instead of
		1905	C<ev_timer_start>.
		1906
		1907	To implement this, configure an C<ev_timer> with a C<repeat> value
		1908	of C<60> and then call C<ev_timer_again> at start and each time you
		1909	successfully read or write some data. If you go into an idle state where
		1910	you do not expect data to travel on the socket, you can C<ev_timer_stop>
		1911	the timer, and C<ev_timer_again> will automatically restart it if need be.
		1912
		1913	That means you can ignore both the C<ev_timer_start> function and the
		1914	C<after> argument to C<ev_timer_set>, and only ever use the C<repeat>
		1915	member and C<ev_timer_again>.
		1916
		1917	At start:
		1918
		1919	ev_init (timer, callback);
		1920	timer->repeat = 60.;
		1921	ev_timer_again (loop, timer);
		1922
		1923	Each time there is some activity:
		1924
		1925	ev_timer_again (loop, timer);
		1926
		1927	It is even possible to change the time-out on the fly, regardless of
		1928	whether the watcher is active or not:
		1929
		1930	timer->repeat = 30.;
		1931	ev_timer_again (loop, timer);
		1932
		1933	This is slightly more efficient then stopping/starting the timer each time
		1934	you want to modify its timeout value, as libev does not have to completely
		1935	remove and re-insert the timer from/into its internal data structure.
		1936
		1937	It is, however, even simpler than the "obvious" way to do it.
		1938
		1939	=item 3. Let the timer time out, but then re-arm it as required.
		1940
		1941	This method is more tricky, but usually most efficient: Most timeouts are
		1942	relatively long compared to the intervals between other activity - in
		1943	our example, within 60 seconds, there are usually many I/O events with
		1944	associated activity resets.
		1945
		1946	In this case, it would be more efficient to leave the C<ev_timer> alone,
		1947	but remember the time of last activity, and check for a real timeout only
		1948	within the callback:
		1949
		1950	ev_tstamp timeout = 60.;
		1951	ev_tstamp last_activity; // time of last activity
		1952	ev_timer timer;
		1953
		1954	static void
		1955	callback (EV_P_ ev_timer *w, int revents)
		1956	{
		1957	// calculate when the timeout would happen
		1958	ev_tstamp after = last_activity - ev_now (EV_A) + timeout;
		1959
		1960	// if negative, it means we the timeout already occurred
		1961	if (after < 0.)
		1962	{
		1963	// timeout occurred, take action
		1964	}
		1965	else
		1966	{
		1967	// callback was invoked, but there was some recent
		1968	// activity. simply restart the timer to time out
		1969	// after "after" seconds, which is the earliest time
		1970	// the timeout can occur.
		1971	ev_timer_set (w, after, 0.);
		1972	ev_timer_start (EV_A_ w);
		1973	}
		1974	}
		1975
		1976	To summarise the callback: first calculate in how many seconds the
		1977	timeout will occur (by calculating the absolute time when it would occur,
		1978	C<last_activity + timeout>, and subtracting the current time, C<ev_now
		1979	(EV_A)> from that).
		1980
		1981	If this value is negative, then we are already past the timeout, i.e. we
		1982	timed out, and need to do whatever is needed in this case.
		1983
		1984	Otherwise, we now the earliest time at which the timeout would trigger,
		1985	and simply start the timer with this timeout value.
		1986
		1987	In other words, each time the callback is invoked it will check whether
		1988	the timeout occurred. If not, it will simply reschedule itself to check
		1989	again at the earliest time it could time out. Rinse. Repeat.
		1990
		1991	This scheme causes more callback invocations (about one every 60 seconds
		1992	minus half the average time between activity), but virtually no calls to
		1993	libev to change the timeout.
		1994
		1995	To start the machinery, simply initialise the watcher and set
		1996	C<last_activity> to the current time (meaning there was some activity just
		1997	now), then call the callback, which will "do the right thing" and start
		1998	the timer:
		1999
		2000	last_activity = ev_now (EV_A);
		2001	ev_init (&timer, callback);
		2002	callback (EV_A_ &timer, 0);
		2003
		2004	When there is some activity, simply store the current time in
		2005	C<last_activity>, no libev calls at all:
		2006
		2007	if (activity detected)
		2008	last_activity = ev_now (EV_A);
		2009
		2010	When your timeout value changes, then the timeout can be changed by simply
		2011	providing a new value, stopping the timer and calling the callback, which
		2012	will again do the right thing (for example, time out immediately :).
		2013
		2014	timeout = new_value;
		2015	ev_timer_stop (EV_A_ &timer);
		2016	callback (EV_A_ &timer, 0);
		2017
		2018	This technique is slightly more complex, but in most cases where the
		2019	time-out is unlikely to be triggered, much more efficient.
		2020
		2021	=item 4. Wee, just use a double-linked list for your timeouts.
		2022
		2023	If there is not one request, but many thousands (millions...), all
		2024	employing some kind of timeout with the same timeout value, then one can
		2025	do even better:
		2026
		2027	When starting the timeout, calculate the timeout value and put the timeout
		2028	at the I<end> of the list.
		2029
		2030	Then use an C<ev_timer> to fire when the timeout at the I<beginning> of
		2031	the list is expected to fire (for example, using the technique #3).
		2032
		2033	When there is some activity, remove the timer from the list, recalculate
		2034	the timeout, append it to the end of the list again, and make sure to
		2035	update the C<ev_timer> if it was taken from the beginning of the list.
		2036
		2037	This way, one can manage an unlimited number of timeouts in O(1) time for
		2038	starting, stopping and updating the timers, at the expense of a major
		2039	complication, and having to use a constant timeout. The constant timeout
		2040	ensures that the list stays sorted.
		2041
		2042	=back
		2043
		2044	So which method the best?
		2045
		2046	Method #2 is a simple no-brain-required solution that is adequate in most
		2047	situations. Method #3 requires a bit more thinking, but handles many cases
		2048	better, and isn't very complicated either. In most case, choosing either
		2049	one is fine, with #3 being better in typical situations.
		2050
		2051	Method #1 is almost always a bad idea, and buys you nothing. Method #4 is
		2052	rather complicated, but extremely efficient, something that really pays
		2053	off after the first million or so of active timers, i.e. it's usually
		2054	overkill :)
		2055
		2056	=head3 The special problem of being too early
		2057
		2058	If you ask a timer to call your callback after three seconds, then
		2059	you expect it to be invoked after three seconds - but of course, this
		2060	cannot be guaranteed to infinite precision. Less obviously, it cannot be
		2061	guaranteed to any precision by libev - imagine somebody suspending the
		2062	process with a STOP signal for a few hours for example.
		2063
		2064	So, libev tries to invoke your callback as soon as possible I<after> the
		2065	delay has occurred, but cannot guarantee this.
		2066
		2067	A less obvious failure mode is calling your callback too early: many event
		2068	loops compare timestamps with a "elapsed delay >= requested delay", but
		2069	this can cause your callback to be invoked much earlier than you would
		2070	expect.
		2071
		2072	To see why, imagine a system with a clock that only offers full second
		2073	resolution (think windows if you can't come up with a broken enough OS
		2074	yourself). If you schedule a one-second timer at the time 500.9, then the
		2075	event loop will schedule your timeout to elapse at a system time of 500
		2076	(500.9 truncated to the resolution) + 1, or 501.
		2077
		2078	If an event library looks at the timeout 0.1s later, it will see "501 >=
		2079	501" and invoke the callback 0.1s after it was started, even though a
		2080	one-second delay was requested - this is being "too early", despite best
		2081	intentions.
		2082
		2083	This is the reason why libev will never invoke the callback if the elapsed
		2084	delay equals the requested delay, but only when the elapsed delay is
		2085	larger than the requested delay. In the example above, libev would only invoke
		2086	the callback at system time 502, or 1.1s after the timer was started.
		2087
		2088	So, while libev cannot guarantee that your callback will be invoked
		2089	exactly when requested, it I<can> and I<does> guarantee that the requested
		2090	delay has actually elapsed, or in other words, it always errs on the "too
		2091	late" side of things.
		2092
		2093	=head3 The special problem of time updates
		2094
		2095	Establishing the current time is a costly operation (it usually takes
		2096	at least one system call): EV therefore updates its idea of the current
		2097	time only before and after C<ev_run> collects new events, which causes a
		2098	growing difference between C<ev_now ()> and C<ev_time ()> when handling
		2099	lots of events in one iteration.
1108		2100
1109	The relative timeouts are calculated relative to the C<ev_now ()>	2101	The relative timeouts are calculated relative to the C<ev_now ()>
1110	time. This is usually the right thing as this timestamp refers to the time	2102	time. This is usually the right thing as this timestamp refers to the time
1111	of the event triggering whatever timeout you are modifying/starting. If	2103	of the event triggering whatever timeout you are modifying/starting. If
1112	you suspect event processing to be delayed and you I<need> to base the timeout	2104	you suspect event processing to be delayed and you I<need> to base the
1113	on the current time, use something like this to adjust for this:	2105	timeout on the current time, use something like the following to adjust
		2106	for it:
1114		2107
1115	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);	2108	ev_timer_set (&timer, after + (ev_time () - ev_now ()), 0.);
1116		2109
1117	The callback is guarenteed to be invoked only when its timeout has passed,	2110	If the event loop is suspended for a long time, you can also force an
1118	but if multiple timers become ready during the same loop iteration then	2111	update of the time returned by C<ev_now ()> by calling C<ev_now_update
1119	order of execution is undefined.	2112	()>, although that will push the event time of all outstanding events
		2113	further into the future.
		2114
		2115	=head3 The special problem of unsynchronised clocks
		2116
		2117	Modern systems have a variety of clocks - libev itself uses the normal
		2118	"wall clock" clock and, if available, the monotonic clock (to avoid time
		2119	jumps).
		2120
		2121	Neither of these clocks is synchronised with each other or any other clock
		2122	on the system, so C<ev_time ()> might return a considerably different time
		2123	than C<gettimeofday ()> or C<time ()>. On a GNU/Linux system, for example,
		2124	a call to C<gettimeofday> might return a second count that is one higher
		2125	than a directly following call to C<time>.
		2126
		2127	The moral of this is to only compare libev-related timestamps with
		2128	C<ev_time ()> and C<ev_now ()>, at least if you want better precision than
		2129	a second or so.
		2130
		2131	One more problem arises due to this lack of synchronisation: if libev uses
		2132	the system monotonic clock and you compare timestamps from C<ev_time>
		2133	or C<ev_now> from when you started your timer and when your callback is
		2134	invoked, you will find that sometimes the callback is a bit "early".
		2135
		2136	This is because C<ev_timer>s work in real time, not wall clock time, so
		2137	libev makes sure your callback is not invoked before the delay happened,
		2138	I<measured according to the real time>, not the system clock.
		2139
		2140	If your timeouts are based on a physical timescale (e.g. "time out this
		2141	connection after 100 seconds") then this shouldn't bother you as it is
		2142	exactly the right behaviour.
		2143
		2144	If you want to compare wall clock/system timestamps to your timers, then
		2145	you need to use C<ev_periodic>s, as these are based on the wall clock
		2146	time, where your comparisons will always generate correct results.
		2147
		2148	=head3 The special problems of suspended animation
		2149
		2150	When you leave the server world it is quite customary to hit machines that
		2151	can suspend/hibernate - what happens to the clocks during such a suspend?
		2152
		2153	Some quick tests made with a Linux 2.6.28 indicate that a suspend freezes
		2154	all processes, while the clocks (C<times>, C<CLOCK_MONOTONIC>) continue
		2155	to run until the system is suspended, but they will not advance while the
		2156	system is suspended. That means, on resume, it will be as if the program
		2157	was frozen for a few seconds, but the suspend time will not be counted
		2158	towards C<ev_timer> when a monotonic clock source is used. The real time
		2159	clock advanced as expected, but if it is used as sole clocksource, then a
		2160	long suspend would be detected as a time jump by libev, and timers would
		2161	be adjusted accordingly.
		2162
		2163	I would not be surprised to see different behaviour in different between
		2164	operating systems, OS versions or even different hardware.
		2165
		2166	The other form of suspend (job control, or sending a SIGSTOP) will see a
		2167	time jump in the monotonic clocks and the realtime clock. If the program
		2168	is suspended for a very long time, and monotonic clock sources are in use,
		2169	then you can expect C<ev_timer>s to expire as the full suspension time
		2170	will be counted towards the timers. When no monotonic clock source is in
		2171	use, then libev will again assume a timejump and adjust accordingly.
		2172
		2173	It might be beneficial for this latter case to call C<ev_suspend>
		2174	and C<ev_resume> in code that handles C<SIGTSTP>, to at least get
		2175	deterministic behaviour in this case (you can do nothing against
		2176	C<SIGSTOP>).
1120		2177
1121	=head3 Watcher-Specific Functions and Data Members	2178	=head3 Watcher-Specific Functions and Data Members
1122		2179
1123	=over 4	2180	=over 4
1124		2181
1125	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	2182	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
1126		2183
1127	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)	2184	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)
1128		2185
1129	Configure the timer to trigger after C<after> seconds. If C<repeat> is	2186	Configure the timer to trigger after C<after> seconds (fractional and
1130	C<0.>, then it will automatically be stopped. If it is positive, then the	2187	negative values are supported). If C<repeat> is C<0.>, then it will
		2188	automatically be stopped once the timeout is reached. If it is positive,
1131	timer will automatically be configured to trigger again C<repeat> seconds	2189	then the timer will automatically be configured to trigger again C<repeat>
1132	later, again, and again, until stopped manually.	2190	seconds later, again, and again, until stopped manually.
1133		2191
1134	The timer itself will do a best-effort at avoiding drift, that is, if you	2192	The timer itself will do a best-effort at avoiding drift, that is, if
1135	configure a timer to trigger every 10 seconds, then it will trigger at	2193	you configure a timer to trigger every 10 seconds, then it will normally
1136	exactly 10 second intervals. If, however, your program cannot keep up with	2194	trigger at exactly 10 second intervals. If, however, your program cannot
1137	the timer (because it takes longer than those 10 seconds to do stuff) the	2195	keep up with the timer (because it takes longer than those 10 seconds to
1138	timer will not fire more than once per event loop iteration.	2196	do stuff) the timer will not fire more than once per event loop iteration.
1139		2197
1140	=item ev_timer_again (loop)	2198	=item ev_timer_again (loop, ev_timer *)
1141		2199
1142	This will act as if the timer timed out and restart it again if it is	2200	This will act as if the timer timed out, and restarts it again if it is
1143	repeating. The exact semantics are:	2201	repeating. It basically works like calling C<ev_timer_stop>, updating the
		2202	timeout to the C<repeat> value and calling C<ev_timer_start>.
1144		2203
		2204	The exact semantics are as in the following rules, all of which will be
		2205	applied to the watcher:
		2206
		2207	=over 4
		2208
1145	If the timer is pending, its pending status is cleared.	2209	=item If the timer is pending, the pending status is always cleared.
1146		2210
1147	If the timer is started but nonrepeating, stop it (as if it timed out).	2211	=item If the timer is started but non-repeating, stop it (as if it timed
		2212	out, without invoking it).
1148		2213
1149	If the timer is repeating, either start it if necessary (with the	2214	=item If the timer is repeating, make the C<repeat> value the new timeout
1150	C<repeat> value), or reset the running timer to the C<repeat> value.	2215	and start the timer, if necessary.
1151		2216
1152	This sounds a bit complicated, but here is a useful and typical	2217	=back
1153	example: Imagine you have a tcp connection and you want a so-called idle
1154	timeout, that is, you want to be called when there have been, say, 60
1155	seconds of inactivity on the socket. The easiest way to do this is to
1156	configure an C<ev_timer> with a C<repeat> value of C<60> and then call
1157	C<ev_timer_again> each time you successfully read or write some data. If
1158	you go into an idle state where you do not expect data to travel on the
1159	socket, you can C<ev_timer_stop> the timer, and C<ev_timer_again> will
1160	automatically restart it if need be.
1161		2218
1162	That means you can ignore the C<after> value and C<ev_timer_start>	2219	This sounds a bit complicated, see L</Be smart about timeouts>, above, for a
1163	altogether and only ever use the C<repeat> value and C<ev_timer_again>:	2220	usage example.
1164		2221
1165	ev_timer_init (timer, callback, 0., 5.);	2222	=item ev_tstamp ev_timer_remaining (loop, ev_timer *)
1166	ev_timer_again (loop, timer);
1167	...
1168	timer->again = 17.;
1169	ev_timer_again (loop, timer);
1170	...
1171	timer->again = 10.;
1172	ev_timer_again (loop, timer);
1173		2223
1174	This is more slightly efficient then stopping/starting the timer each time	2224	Returns the remaining time until a timer fires. If the timer is active,
1175	you want to modify its timeout value.	2225	then this time is relative to the current event loop time, otherwise it's
		2226	the timeout value currently configured.
		2227
		2228	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns
		2229	C<5>. When the timer is started and one second passes, C<ev_timer_remaining>
		2230	will return C<4>. When the timer expires and is restarted, it will return
		2231	roughly C<7> (likely slightly less as callback invocation takes some time,
		2232	too), and so on.
1176		2233
1177	=item ev_tstamp repeat [read-write]	2234	=item ev_tstamp repeat [read-write]
1178		2235
1179	The current C<repeat> value. Will be used each time the watcher times out	2236	The current C<repeat> value. Will be used each time the watcher times out
1180	or C<ev_timer_again> is called and determines the next timeout (if any),	2237	or C<ev_timer_again> is called, and determines the next timeout (if any),
1181	which is also when any modifications are taken into account.	2238	which is also when any modifications are taken into account.
1182		2239
1183	=back	2240	=back
1184		2241
		2242	=head3 Examples
		2243
1185	Example: Create a timer that fires after 60 seconds.	2244	Example: Create a timer that fires after 60 seconds.
1186		2245
1187	static void	2246	static void
1188	one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)	2247	one_minute_cb (struct ev_loop *loop, ev_timer *w, int revents)
1189	{	2248	{
1190	.. one minute over, w is actually stopped right here	2249	.. one minute over, w is actually stopped right here
1191	}	2250	}
1192		2251
1193	struct ev_timer mytimer;	2252	ev_timer mytimer;
1194	ev_timer_init (&mytimer, one_minute_cb, 60., 0.);	2253	ev_timer_init (&mytimer, one_minute_cb, 60., 0.);
1195	ev_timer_start (loop, &mytimer);	2254	ev_timer_start (loop, &mytimer);
1196		2255
1197	Example: Create a timeout timer that times out after 10 seconds of	2256	Example: Create a timeout timer that times out after 10 seconds of
1198	inactivity.	2257	inactivity.
1199		2258
1200	static void	2259	static void
1201	timeout_cb (struct ev_loop *loop, struct ev_timer *w, int revents)	2260	timeout_cb (struct ev_loop *loop, ev_timer *w, int revents)
1202	{	2261	{
1203	.. ten seconds without any activity	2262	.. ten seconds without any activity
1204	}	2263	}
1205		2264
1206	struct ev_timer mytimer;	2265	ev_timer mytimer;
1207	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */	2266	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
1208	ev_timer_again (&mytimer); /* start timer */	2267	ev_timer_again (&mytimer); /* start timer */
1209	ev_loop (loop, 0);	2268	ev_run (loop, 0);
1210		2269
1211	// and in some piece of code that gets executed on any "activity":	2270	// and in some piece of code that gets executed on any "activity":
1212	// reset the timeout to start ticking again at 10 seconds	2271	// reset the timeout to start ticking again at 10 seconds
1213	ev_timer_again (&mytimer);	2272	ev_timer_again (&mytimer);
1214		2273
1215		2274
1216	=head2 C<ev_periodic> - to cron or not to cron?	2275	=head2 C<ev_periodic> - to cron or not to cron?
1217		2276
1218	Periodic watchers are also timers of a kind, but they are very versatile	2277	Periodic watchers are also timers of a kind, but they are very versatile
1219	(and unfortunately a bit complex).	2278	(and unfortunately a bit complex).
1220		2279
1221	Unlike C<ev_timer>'s, they are not based on real time (or relative time)	2280	Unlike C<ev_timer>, periodic watchers are not based on real time (or
1222	but on wallclock time (absolute time). You can tell a periodic watcher	2281	relative time, the physical time that passes) but on wall clock time
1223	to trigger "at" some specific point in time. For example, if you tell a	2282	(absolute time, the thing you can read on your calendar or clock). The
1224	periodic watcher to trigger in 10 seconds (by specifiying e.g. C<ev_now ()	2283	difference is that wall clock time can run faster or slower than real
1225	+ 10.>) and then reset your system clock to the last year, then it will	2284	time, and time jumps are not uncommon (e.g. when you adjust your
1226	take a year to trigger the event (unlike an C<ev_timer>, which would trigger	2285	wrist-watch).
1227	roughly 10 seconds later).
1228		2286
1229	They can also be used to implement vastly more complex timers, such as	2287	You can tell a periodic watcher to trigger after some specific point
1230	triggering an event on each midnight, local time or other, complicated,	2288	in time: for example, if you tell a periodic watcher to trigger "in 10
1231	rules.	2289	seconds" (by specifying e.g. C<ev_now () + 10.>, that is, an absolute time
		2290	not a delay) and then reset your system clock to January of the previous
		2291	year, then it will take a year or more to trigger the event (unlike an
		2292	C<ev_timer>, which would still trigger roughly 10 seconds after starting
		2293	it, as it uses a relative timeout).
1232		2294
		2295	C<ev_periodic> watchers can also be used to implement vastly more complex
		2296	timers, such as triggering an event on each "midnight, local time", or
		2297	other complicated rules. This cannot easily be done with C<ev_timer>
		2298	watchers, as those cannot react to time jumps.
		2299
1233	As with timers, the callback is guarenteed to be invoked only when the	2300	As with timers, the callback is guaranteed to be invoked only when the
1234	time (C<at>) has been passed, but if multiple periodic timers become ready	2301	point in time where it is supposed to trigger has passed. If multiple
1235	during the same loop iteration then order of execution is undefined.	2302	timers become ready during the same loop iteration then the ones with
		2303	earlier time-out values are invoked before ones with later time-out values
		2304	(but this is no longer true when a callback calls C<ev_run> recursively).
1236		2305
1237	=head3 Watcher-Specific Functions and Data Members	2306	=head3 Watcher-Specific Functions and Data Members
1238		2307
1239	=over 4	2308	=over 4
1240		2309
1241	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)	2310	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp offset, ev_tstamp interval, reschedule_cb)
1242		2311
1243	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)	2312	=item ev_periodic_set (ev_periodic *, ev_tstamp offset, ev_tstamp interval, reschedule_cb)
1244		2313
1245	Lots of arguments, lets sort it out... There are basically three modes of	2314	Lots of arguments, let's sort it out... There are basically three modes of
1246	operation, and we will explain them from simplest to complex:	2315	operation, and we will explain them from simplest to most complex:
1247		2316
1248	=over 4	2317	=over 4
1249		2318
1250	=item * absolute timer (at = time, interval = reschedule_cb = 0)	2319	=item * absolute timer (offset = absolute time, interval = 0, reschedule_cb = 0)
1251		2320
1252	In this configuration the watcher triggers an event at the wallclock time	2321	In this configuration the watcher triggers an event after the wall clock
1253	C<at> and doesn't repeat. It will not adjust when a time jump occurs,	2322	time C<offset> has passed. It will not repeat and will not adjust when a
1254	that is, if it is to be run at January 1st 2011 then it will run when the	2323	time jump occurs, that is, if it is to be run at January 1st 2011 then it
1255	system time reaches or surpasses this time.	2324	will be stopped and invoked when the system clock reaches or surpasses
		2325	this point in time.
1256		2326
1257	=item * non-repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)	2327	=item * repeating interval timer (offset = offset within interval, interval > 0, reschedule_cb = 0)
1258		2328
1259	In this mode the watcher will always be scheduled to time out at the next	2329	In this mode the watcher will always be scheduled to time out at the next
1260	C<at + N * interval> time (for some integer N, which can also be negative)	2330	C<offset + N * interval> time (for some integer N, which can also be
1261	and then repeat, regardless of any time jumps.	2331	negative) and then repeat, regardless of any time jumps. The C<offset>
		2332	argument is merely an offset into the C<interval> periods.
1262		2333
1263	This can be used to create timers that do not drift with respect to system	2334	This can be used to create timers that do not drift with respect to the
1264	time:	2335	system clock, for example, here is an C<ev_periodic> that triggers each
		2336	hour, on the hour (with respect to UTC):
1265		2337
1266	ev_periodic_set (&periodic, 0., 3600., 0);	2338	ev_periodic_set (&periodic, 0., 3600., 0);
1267		2339
1268	This doesn't mean there will always be 3600 seconds in between triggers,	2340	This doesn't mean there will always be 3600 seconds in between triggers,
1269	but only that the the callback will be called when the system time shows a	2341	but only that the callback will be called when the system time shows a
1270	full hour (UTC), or more correctly, when the system time is evenly divisible	2342	full hour (UTC), or more correctly, when the system time is evenly divisible
1271	by 3600.	2343	by 3600.
1272		2344
1273	Another way to think about it (for the mathematically inclined) is that	2345	Another way to think about it (for the mathematically inclined) is that
1274	C<ev_periodic> will try to run the callback in this mode at the next possible	2346	C<ev_periodic> will try to run the callback in this mode at the next possible
1275	time where C<time = at (mod interval)>, regardless of any time jumps.	2347	time where C<time = offset (mod interval)>, regardless of any time jumps.
1276		2348
1277	For numerical stability it is preferable that the C<at> value is near	2349	The C<interval> I<MUST> be positive, and for numerical stability, the
1278	C<ev_now ()> (the current time), but there is no range requirement for	2350	interval value should be higher than C<1/8192> (which is around 100
1279	this value.	2351	microseconds) and C<offset> should be higher than C<0> and should have
		2352	at most a similar magnitude as the current time (say, within a factor of
		2353	ten). Typical values for offset are, in fact, C<0> or something between
		2354	C<0> and C<interval>, which is also the recommended range.
1280		2355
		2356	Note also that there is an upper limit to how often a timer can fire (CPU
		2357	speed for example), so if C<interval> is very small then timing stability
		2358	will of course deteriorate. Libev itself tries to be exact to be about one
		2359	millisecond (if the OS supports it and the machine is fast enough).
		2360
1281	=item * manual reschedule mode (at and interval ignored, reschedule_cb = callback)	2361	=item * manual reschedule mode (offset ignored, interval ignored, reschedule_cb = callback)
1282		2362
1283	In this mode the values for C<interval> and C<at> are both being	2363	In this mode the values for C<interval> and C<offset> are both being
1284	ignored. Instead, each time the periodic watcher gets scheduled, the	2364	ignored. Instead, each time the periodic watcher gets scheduled, the
1285	reschedule callback will be called with the watcher as first, and the	2365	reschedule callback will be called with the watcher as first, and the
1286	current time as second argument.	2366	current time as second argument.
1287		2367
1288	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,	2368	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher, ever,
1289	ever, or make any event loop modifications>. If you need to stop it,	2369	or make ANY other event loop modifications whatsoever, unless explicitly
1290	return C<now + 1e30> (or so, fudge fudge) and stop it afterwards (e.g. by	2370	allowed by documentation here>.
1291	starting an C<ev_prepare> watcher, which is legal).
1292		2371
		2372	If you need to stop it, return C<now + 1e30> (or so, fudge fudge) and stop
		2373	it afterwards (e.g. by starting an C<ev_prepare> watcher, which is the
		2374	only event loop modification you are allowed to do).
		2375
1293	Its prototype is C<ev_tstamp (*reschedule_cb)(struct ev_periodic *w,	2376	The callback prototype is C<ev_tstamp (*reschedule_cb)(ev_periodic
1294	ev_tstamp now)>, e.g.:	2377	*w, ev_tstamp now)>, e.g.:
1295		2378
		2379	static ev_tstamp
1296	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)	2380	my_rescheduler (ev_periodic *w, ev_tstamp now)
1297	{	2381	{
1298	return now + 60.;	2382	return now + 60.;
1299	}	2383	}
1300		2384
1301	It must return the next time to trigger, based on the passed time value	2385	It must return the next time to trigger, based on the passed time value
1302	(that is, the lowest time value larger than to the second argument). It	2386	(that is, the lowest time value larger than to the second argument). It
1303	will usually be called just before the callback will be triggered, but	2387	will usually be called just before the callback will be triggered, but
1304	might be called at other times, too.	2388	might be called at other times, too.
1305		2389
1306	NOTE: I<< This callback must always return a time that is later than the	2390	NOTE: I<< This callback must always return a time that is higher than or
1307	passed C<now> value >>. Not even C<now> itself will do, it I<must> be larger.	2391	equal to the passed C<now> value >>.
1308		2392
1309	This can be used to create very complex timers, such as a timer that	2393	This can be used to create very complex timers, such as a timer that
1310	triggers on each midnight, local time. To do this, you would calculate the	2394	triggers on "next midnight, local time". To do this, you would calculate
1311	next midnight after C<now> and return the timestamp value for this. How	2395	the next midnight after C<now> and return the timestamp value for
1312	you do this is, again, up to you (but it is not trivial, which is the main	2396	this. Here is a (completely untested, no error checking) example on how to
1313	reason I omitted it as an example).	2397	do this:
		2398
		2399	#include <time.h>
		2400
		2401	static ev_tstamp
		2402	my_rescheduler (ev_periodic *w, ev_tstamp now)
		2403	{
		2404	time_t tnow = (time_t)now;
		2405	struct tm tm;
		2406	localtime_r (&tnow, &tm);
		2407
		2408	tm.tm_sec = tm.tm_min = tm.tm_hour = 0; // midnight current day
		2409	++tm.tm_mday; // midnight next day
		2410
		2411	return mktime (&tm);
		2412	}
		2413
		2414	Note: this code might run into trouble on days that have more then two
		2415	midnights (beginning and end).
1314		2416
1315	=back	2417	=back
1316		2418
1317	=item ev_periodic_again (loop, ev_periodic *)	2419	=item ev_periodic_again (loop, ev_periodic *)
1318		2420
1319	Simply stops and restarts the periodic watcher again. This is only useful	2421	Simply stops and restarts the periodic watcher again. This is only useful
1320	when you changed some parameters or the reschedule callback would return	2422	when you changed some parameters or the reschedule callback would return
1321	a different time than the last time it was called (e.g. in a crond like	2423	a different time than the last time it was called (e.g. in a crond like
1322	program when the crontabs have changed).	2424	program when the crontabs have changed).
1323		2425
		2426	=item ev_tstamp ev_periodic_at (ev_periodic *)
		2427
		2428	When active, returns the absolute time that the watcher is supposed
		2429	to trigger next. This is not the same as the C<offset> argument to
		2430	C<ev_periodic_set>, but indeed works even in interval and manual
		2431	rescheduling modes.
		2432
1324	=item ev_tstamp offset [read-write]	2433	=item ev_tstamp offset [read-write]
1325		2434
1326	When repeating, this contains the offset value, otherwise this is the	2435	When repeating, this contains the offset value, otherwise this is the
1327	absolute point in time (the C<at> value passed to C<ev_periodic_set>).	2436	absolute point in time (the C<offset> value passed to C<ev_periodic_set>,
		2437	although libev might modify this value for better numerical stability).
1328		2438
1329	Can be modified any time, but changes only take effect when the periodic	2439	Can be modified any time, but changes only take effect when the periodic
1330	timer fires or C<ev_periodic_again> is being called.	2440	timer fires or C<ev_periodic_again> is being called.
1331		2441
1332	=item ev_tstamp interval [read-write]	2442	=item ev_tstamp interval [read-write]
1333		2443
1334	The current interval value. Can be modified any time, but changes only	2444	The current interval value. Can be modified any time, but changes only
1335	take effect when the periodic timer fires or C<ev_periodic_again> is being	2445	take effect when the periodic timer fires or C<ev_periodic_again> is being
1336	called.	2446	called.
1337		2447
1338	=item ev_tstamp (*reschedule_cb)(struct ev_periodic *w, ev_tstamp now) [read-write]	2448	=item ev_tstamp (*reschedule_cb)(ev_periodic *w, ev_tstamp now) [read-write]
1339		2449
1340	The current reschedule callback, or C<0>, if this functionality is	2450	The current reschedule callback, or C<0>, if this functionality is
1341	switched off. Can be changed any time, but changes only take effect when	2451	switched off. Can be changed any time, but changes only take effect when
1342	the periodic timer fires or C<ev_periodic_again> is being called.	2452	the periodic timer fires or C<ev_periodic_again> is being called.
1343		2453
1344	=item ev_tstamp at [read-only]
1345
1346	When active, contains the absolute time that the watcher is supposed to
1347	trigger next.
1348
1349	=back	2454	=back
1350		2455
		2456	=head3 Examples
		2457
1351	Example: Call a callback every hour, or, more precisely, whenever the	2458	Example: Call a callback every hour, or, more precisely, whenever the
1352	system clock is divisible by 3600. The callback invocation times have	2459	system time is divisible by 3600. The callback invocation times have
1353	potentially a lot of jittering, but good long-term stability.	2460	potentially a lot of jitter, but good long-term stability.
1354		2461
1355	static void	2462	static void
1356	clock_cb (struct ev_loop *loop, struct ev_io *w, int revents)	2463	clock_cb (struct ev_loop *loop, ev_periodic *w, int revents)
1357	{	2464	{
1358	... its now a full hour (UTC, or TAI or whatever your clock follows)	2465	... its now a full hour (UTC, or TAI or whatever your clock follows)
1359	}	2466	}
1360		2467
1361	struct ev_periodic hourly_tick;	2468	ev_periodic hourly_tick;
1362	ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);	2469	ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);
1363	ev_periodic_start (loop, &hourly_tick);	2470	ev_periodic_start (loop, &hourly_tick);
1364		2471
1365	Example: The same as above, but use a reschedule callback to do it:	2472	Example: The same as above, but use a reschedule callback to do it:
1366		2473
1367	#include <math.h>	2474	#include <math.h>
1368		2475
1369	static ev_tstamp	2476	static ev_tstamp
1370	my_scheduler_cb (struct ev_periodic *w, ev_tstamp now)	2477	my_scheduler_cb (ev_periodic *w, ev_tstamp now)
1371	{	2478	{
1372	return fmod (now, 3600.) + 3600.;	2479	return now + (3600. - fmod (now, 3600.));
1373	}	2480	}
1374		2481
1375	ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);	2482	ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);
1376		2483
1377	Example: Call a callback every hour, starting now:	2484	Example: Call a callback every hour, starting now:
1378		2485
1379	struct ev_periodic hourly_tick;	2486	ev_periodic hourly_tick;
1380	ev_periodic_init (&hourly_tick, clock_cb,	2487	ev_periodic_init (&hourly_tick, clock_cb,
1381	fmod (ev_now (loop), 3600.), 3600., 0);	2488	fmod (ev_now (loop), 3600.), 3600., 0);
1382	ev_periodic_start (loop, &hourly_tick);	2489	ev_periodic_start (loop, &hourly_tick);
1383		2490
1384		2491
1385	=head2 C<ev_signal> - signal me when a signal gets signalled!	2492	=head2 C<ev_signal> - signal me when a signal gets signalled!
1386		2493
1387	Signal watchers will trigger an event when the process receives a specific	2494	Signal watchers will trigger an event when the process receives a specific
1388	signal one or more times. Even though signals are very asynchronous, libev	2495	signal one or more times. Even though signals are very asynchronous, libev
1389	will try it's best to deliver signals synchronously, i.e. as part of the	2496	will try its best to deliver signals synchronously, i.e. as part of the
1390	normal event processing, like any other event.	2497	normal event processing, like any other event.
1391		2498
		2499	If you want signals to be delivered truly asynchronously, just use
		2500	C<sigaction> as you would do without libev and forget about sharing
		2501	the signal. You can even use C<ev_async> from a signal handler to
		2502	synchronously wake up an event loop.
		2503
1392	You can configure as many watchers as you like per signal. Only when the	2504	You can configure as many watchers as you like for the same signal, but
1393	first watcher gets started will libev actually register a signal watcher	2505	only within the same loop, i.e. you can watch for C<SIGINT> in your
1394	with the kernel (thus it coexists with your own signal handlers as long	2506	default loop and for C<SIGIO> in another loop, but you cannot watch for
1395	as you don't register any with libev). Similarly, when the last signal	2507	C<SIGINT> in both the default loop and another loop at the same time. At
1396	watcher for a signal is stopped libev will reset the signal handler to	2508	the moment, C<SIGCHLD> is permanently tied to the default loop.
1397	SIG_DFL (regardless of what it was set to before).	2509
		2510	Only after the first watcher for a signal is started will libev actually
		2511	register something with the kernel. It thus coexists with your own signal
		2512	handlers as long as you don't register any with libev for the same signal.
		2513
		2514	If possible and supported, libev will install its handlers with
		2515	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should
		2516	not be unduly interrupted. If you have a problem with system calls getting
		2517	interrupted by signals you can block all signals in an C<ev_check> watcher
		2518	and unblock them in an C<ev_prepare> watcher.
		2519
		2520	=head3 The special problem of inheritance over fork/execve/pthread_create
		2521
		2522	Both the signal mask (C<sigprocmask>) and the signal disposition
		2523	(C<sigaction>) are unspecified after starting a signal watcher (and after
		2524	stopping it again), that is, libev might or might not block the signal,
		2525	and might or might not set or restore the installed signal handler (but
		2526	see C<EVFLAG_NOSIGMASK>).
		2527
		2528	While this does not matter for the signal disposition (libev never
		2529	sets signals to C<SIG_IGN>, so handlers will be reset to C<SIG_DFL> on
		2530	C<execve>), this matters for the signal mask: many programs do not expect
		2531	certain signals to be blocked.
		2532
		2533	This means that before calling C<exec> (from the child) you should reset
		2534	the signal mask to whatever "default" you expect (all clear is a good
		2535	choice usually).
		2536
		2537	The simplest way to ensure that the signal mask is reset in the child is
		2538	to install a fork handler with C<pthread_atfork> that resets it. That will
		2539	catch fork calls done by libraries (such as the libc) as well.
		2540
		2541	In current versions of libev, the signal will not be blocked indefinitely
		2542	unless you use the C<signalfd> API (C<EV_SIGNALFD>). While this reduces
		2543	the window of opportunity for problems, it will not go away, as libev
		2544	I<has> to modify the signal mask, at least temporarily.
		2545
		2546	So I can't stress this enough: I<If you do not reset your signal mask when
		2547	you expect it to be empty, you have a race condition in your code>. This
		2548	is not a libev-specific thing, this is true for most event libraries.
		2549
		2550	=head3 The special problem of threads signal handling
		2551
		2552	POSIX threads has problematic signal handling semantics, specifically,
		2553	a lot of functionality (sigfd, sigwait etc.) only really works if all
		2554	threads in a process block signals, which is hard to achieve.
		2555
		2556	When you want to use sigwait (or mix libev signal handling with your own
		2557	for the same signals), you can tackle this problem by globally blocking
		2558	all signals before creating any threads (or creating them with a fully set
		2559	sigprocmask) and also specifying the C<EVFLAG_NOSIGMASK> when creating
		2560	loops. Then designate one thread as "signal receiver thread" which handles
		2561	these signals. You can pass on any signals that libev might be interested
		2562	in by calling C<ev_feed_signal>.
1398		2563
1399	=head3 Watcher-Specific Functions and Data Members	2564	=head3 Watcher-Specific Functions and Data Members
1400		2565
1401	=over 4	2566	=over 4
1402		2567
…		…
1411		2576
1412	The signal the watcher watches out for.	2577	The signal the watcher watches out for.
1413		2578
1414	=back	2579	=back
1415		2580
		2581	=head3 Examples
		2582
		2583	Example: Try to exit cleanly on SIGINT.
		2584
		2585	static void
		2586	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)
		2587	{
		2588	ev_break (loop, EVBREAK_ALL);
		2589	}
		2590
		2591	ev_signal signal_watcher;
		2592	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
		2593	ev_signal_start (loop, &signal_watcher);
		2594
1416		2595
1417	=head2 C<ev_child> - watch out for process status changes	2596	=head2 C<ev_child> - watch out for process status changes
1418		2597
1419	Child watchers trigger when your process receives a SIGCHLD in response to	2598	Child watchers trigger when your process receives a SIGCHLD in response to
1420	some child status changes (most typically when a child of yours dies).	2599	some child status changes (most typically when a child of yours dies or
		2600	exits). It is permissible to install a child watcher I<after> the child
		2601	has been forked (which implies it might have already exited), as long
		2602	as the event loop isn't entered (or is continued from a watcher), i.e.,
		2603	forking and then immediately registering a watcher for the child is fine,
		2604	but forking and registering a watcher a few event loop iterations later or
		2605	in the next callback invocation is not.
		2606
		2607	Only the default event loop is capable of handling signals, and therefore
		2608	you can only register child watchers in the default event loop.
		2609
		2610	Due to some design glitches inside libev, child watchers will always be
		2611	handled at maximum priority (their priority is set to C<EV_MAXPRI> by
		2612	libev)
		2613
		2614	=head3 Process Interaction
		2615
		2616	Libev grabs C<SIGCHLD> as soon as the default event loop is
		2617	initialised. This is necessary to guarantee proper behaviour even if the
		2618	first child watcher is started after the child exits. The occurrence
		2619	of C<SIGCHLD> is recorded asynchronously, but child reaping is done
		2620	synchronously as part of the event loop processing. Libev always reaps all
		2621	children, even ones not watched.
		2622
		2623	=head3 Overriding the Built-In Processing
		2624
		2625	Libev offers no special support for overriding the built-in child
		2626	processing, but if your application collides with libev's default child
		2627	handler, you can override it easily by installing your own handler for
		2628	C<SIGCHLD> after initialising the default loop, and making sure the
		2629	default loop never gets destroyed. You are encouraged, however, to use an
		2630	event-based approach to child reaping and thus use libev's support for
		2631	that, so other libev users can use C<ev_child> watchers freely.
		2632
		2633	=head3 Stopping the Child Watcher
		2634
		2635	Currently, the child watcher never gets stopped, even when the
		2636	child terminates, so normally one needs to stop the watcher in the
		2637	callback. Future versions of libev might stop the watcher automatically
		2638	when a child exit is detected (calling C<ev_child_stop> twice is not a
		2639	problem).
1421		2640
1422	=head3 Watcher-Specific Functions and Data Members	2641	=head3 Watcher-Specific Functions and Data Members
1423		2642
1424	=over 4	2643	=over 4
1425		2644
1426	=item ev_child_init (ev_child *, callback, int pid)	2645	=item ev_child_init (ev_child *, callback, int pid, int trace)
1427		2646
1428	=item ev_child_set (ev_child *, int pid)	2647	=item ev_child_set (ev_child *, int pid, int trace)
1429		2648
1430	Configures the watcher to wait for status changes of process C<pid> (or	2649	Configures the watcher to wait for status changes of process C<pid> (or
1431	I<any> process if C<pid> is specified as C<0>). The callback can look	2650	I<any> process if C<pid> is specified as C<0>). The callback can look
1432	at the C<rstatus> member of the C<ev_child> watcher structure to see	2651	at the C<rstatus> member of the C<ev_child> watcher structure to see
1433	the status word (use the macros from C<sys/wait.h> and see your systems	2652	the status word (use the macros from C<sys/wait.h> and see your systems
1434	C<waitpid> documentation). The C<rpid> member contains the pid of the	2653	C<waitpid> documentation). The C<rpid> member contains the pid of the
1435	process causing the status change.	2654	process causing the status change. C<trace> must be either C<0> (only
		2655	activate the watcher when the process terminates) or C<1> (additionally
		2656	activate the watcher when the process is stopped or continued).
1436		2657
1437	=item int pid [read-only]	2658	=item int pid [read-only]
1438		2659
1439	The process id this watcher watches out for, or C<0>, meaning any process id.	2660	The process id this watcher watches out for, or C<0>, meaning any process id.
1440		2661
…		…
1447	The process exit/trace status caused by C<rpid> (see your systems	2668	The process exit/trace status caused by C<rpid> (see your systems
1448	C<waitpid> and C<sys/wait.h> documentation for details).	2669	C<waitpid> and C<sys/wait.h> documentation for details).
1449		2670
1450	=back	2671	=back
1451		2672
1452	Example: Try to exit cleanly on SIGINT and SIGTERM.	2673	=head3 Examples
1453		2674
		2675	Example: C<fork()> a new process and install a child handler to wait for
		2676	its completion.
		2677
		2678	ev_child cw;
		2679
1454	static void	2680	static void
1455	sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)	2681	child_cb (EV_P_ ev_child *w, int revents)
1456	{	2682	{
1457	ev_unloop (loop, EVUNLOOP_ALL);	2683	ev_child_stop (EV_A_ w);
		2684	printf ("process %d exited with status %x\n", w->rpid, w->rstatus);
1458	}	2685	}
1459		2686
1460	struct ev_signal signal_watcher;	2687	pid_t pid = fork ();
1461	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	2688
1462	ev_signal_start (loop, &sigint_cb);	2689	if (pid < 0)
		2690	// error
		2691	else if (pid == 0)
		2692	{
		2693	// the forked child executes here
		2694	exit (1);
		2695	}
		2696	else
		2697	{
		2698	ev_child_init (&cw, child_cb, pid, 0);
		2699	ev_child_start (EV_DEFAULT_ &cw);
		2700	}
1463		2701
1464		2702
1465	=head2 C<ev_stat> - did the file attributes just change?	2703	=head2 C<ev_stat> - did the file attributes just change?
1466		2704
1467	This watches a filesystem path for attribute changes. That is, it calls	2705	This watches a file system path for attribute changes. That is, it calls
1468	C<stat> regularly (or when the OS says it changed) and sees if it changed	2706	C<stat> on that path in regular intervals (or when the OS says it changed)
1469	compared to the last time, invoking the callback if it did.	2707	and sees if it changed compared to the last time, invoking the callback
		2708	if it did. Starting the watcher C<stat>'s the file, so only changes that
		2709	happen after the watcher has been started will be reported.
1470		2710
1471	The path does not need to exist: changing from "path exists" to "path does	2711	The path does not need to exist: changing from "path exists" to "path does
1472	not exist" is a status change like any other. The condition "path does	2712	not exist" is a status change like any other. The condition "path does not
1473	not exist" is signified by the C<st_nlink> field being zero (which is	2713	exist" (or more correctly "path cannot be stat'ed") is signified by the
1474	otherwise always forced to be at least one) and all the other fields of	2714	C<st_nlink> field being zero (which is otherwise always forced to be at
1475	the stat buffer having unspecified contents.	2715	least one) and all the other fields of the stat buffer having unspecified
		2716	contents.
1476		2717
1477	The path I<should> be absolute and I<must not> end in a slash. If it is	2718	The path I<must not> end in a slash or contain special components such as
		2719	C<.> or C<..>. The path I<should> be absolute: If it is relative and
1478	relative and your working directory changes, the behaviour is undefined.	2720	your working directory changes, then the behaviour is undefined.
1479		2721
1480	Since there is no standard to do this, the portable implementation simply	2722	Since there is no portable change notification interface available, the
1481	calls C<stat (2)> regularly on the path to see if it changed somehow. You	2723	portable implementation simply calls C<stat(2)> regularly on the path
1482	can specify a recommended polling interval for this case. If you specify	2724	to see if it changed somehow. You can specify a recommended polling
1483	a polling interval of C<0> (highly recommended!) then a I<suitable,	2725	interval for this case. If you specify a polling interval of C<0> (highly
1484	unspecified default> value will be used (which you can expect to be around	2726	recommended!) then a I<suitable, unspecified default> value will be used
1485	five seconds, although this might change dynamically). Libev will also	2727	(which you can expect to be around five seconds, although this might
1486	impose a minimum interval which is currently around C<0.1>, but thats	2728	change dynamically). Libev will also impose a minimum interval which is
1487	usually overkill.	2729	currently around C<0.1>, but that's usually overkill.
1488		2730
1489	This watcher type is not meant for massive numbers of stat watchers,	2731	This watcher type is not meant for massive numbers of stat watchers,
1490	as even with OS-supported change notifications, this can be	2732	as even with OS-supported change notifications, this can be
1491	resource-intensive.	2733	resource-intensive.
1492		2734
1493	At the time of this writing, only the Linux inotify interface is	2735	At the time of this writing, the only OS-specific interface implemented
1494	implemented (implementing kqueue support is left as an exercise for the	2736	is the Linux inotify interface (implementing kqueue support is left as an
1495	reader). Inotify will be used to give hints only and should not change the	2737	exercise for the reader. Note, however, that the author sees no way of
1496	semantics of C<ev_stat> watchers, which means that libev sometimes needs	2738	implementing C<ev_stat> semantics with kqueue, except as a hint).
1497	to fall back to regular polling again even with inotify, but changes are	2739
1498	usually detected immediately, and if the file exists there will be no	2740	=head3 ABI Issues (Largefile Support)
1499	polling.	2741
		2742	Libev by default (unless the user overrides this) uses the default
		2743	compilation environment, which means that on systems with large file
		2744	support disabled by default, you get the 32 bit version of the stat
		2745	structure. When using the library from programs that change the ABI to
		2746	use 64 bit file offsets the programs will fail. In that case you have to
		2747	compile libev with the same flags to get binary compatibility. This is
		2748	obviously the case with any flags that change the ABI, but the problem is
		2749	most noticeably displayed with ev_stat and large file support.
		2750
		2751	The solution for this is to lobby your distribution maker to make large
		2752	file interfaces available by default (as e.g. FreeBSD does) and not
		2753	optional. Libev cannot simply switch on large file support because it has
		2754	to exchange stat structures with application programs compiled using the
		2755	default compilation environment.
		2756
		2757	=head3 Inotify and Kqueue
		2758
		2759	When C<inotify (7)> support has been compiled into libev and present at
		2760	runtime, it will be used to speed up change detection where possible. The
		2761	inotify descriptor will be created lazily when the first C<ev_stat>
		2762	watcher is being started.
		2763
		2764	Inotify presence does not change the semantics of C<ev_stat> watchers
		2765	except that changes might be detected earlier, and in some cases, to avoid
		2766	making regular C<stat> calls. Even in the presence of inotify support
		2767	there are many cases where libev has to resort to regular C<stat> polling,
		2768	but as long as kernel 2.6.25 or newer is used (2.6.24 and older have too
		2769	many bugs), the path exists (i.e. stat succeeds), and the path resides on
		2770	a local filesystem (libev currently assumes only ext2/3, jfs, reiserfs and
		2771	xfs are fully working) libev usually gets away without polling.
		2772
		2773	There is no support for kqueue, as apparently it cannot be used to
		2774	implement this functionality, due to the requirement of having a file
		2775	descriptor open on the object at all times, and detecting renames, unlinks
		2776	etc. is difficult.
		2777
		2778	=head3 C<stat ()> is a synchronous operation
		2779
		2780	Libev doesn't normally do any kind of I/O itself, and so is not blocking
		2781	the process. The exception are C<ev_stat> watchers - those call C<stat
		2782	()>, which is a synchronous operation.
		2783
		2784	For local paths, this usually doesn't matter: unless the system is very
		2785	busy or the intervals between stat's are large, a stat call will be fast,
		2786	as the path data is usually in memory already (except when starting the
		2787	watcher).
		2788
		2789	For networked file systems, calling C<stat ()> can block an indefinite
		2790	time due to network issues, and even under good conditions, a stat call
		2791	often takes multiple milliseconds.
		2792
		2793	Therefore, it is best to avoid using C<ev_stat> watchers on networked
		2794	paths, although this is fully supported by libev.
		2795
		2796	=head3 The special problem of stat time resolution
		2797
		2798	The C<stat ()> system call only supports full-second resolution portably,
		2799	and even on systems where the resolution is higher, most file systems
		2800	still only support whole seconds.
		2801
		2802	That means that, if the time is the only thing that changes, you can
		2803	easily miss updates: on the first update, C<ev_stat> detects a change and
		2804	calls your callback, which does something. When there is another update
		2805	within the same second, C<ev_stat> will be unable to detect unless the
		2806	stat data does change in other ways (e.g. file size).
		2807
		2808	The solution to this is to delay acting on a change for slightly more
		2809	than a second (or till slightly after the next full second boundary), using
		2810	a roughly one-second-delay C<ev_timer> (e.g. C<ev_timer_set (w, 0., 1.02);
		2811	ev_timer_again (loop, w)>).
		2812
		2813	The C<.02> offset is added to work around small timing inconsistencies
		2814	of some operating systems (where the second counter of the current time
		2815	might be be delayed. One such system is the Linux kernel, where a call to
		2816	C<gettimeofday> might return a timestamp with a full second later than
		2817	a subsequent C<time> call - if the equivalent of C<time ()> is used to
		2818	update file times then there will be a small window where the kernel uses
		2819	the previous second to update file times but libev might already execute
		2820	the timer callback).
1500		2821
1501	=head3 Watcher-Specific Functions and Data Members	2822	=head3 Watcher-Specific Functions and Data Members
1502		2823
1503	=over 4	2824	=over 4
1504		2825
…		…
1510	C<path>. The C<interval> is a hint on how quickly a change is expected to	2831	C<path>. The C<interval> is a hint on how quickly a change is expected to
1511	be detected and should normally be specified as C<0> to let libev choose	2832	be detected and should normally be specified as C<0> to let libev choose
1512	a suitable value. The memory pointed to by C<path> must point to the same	2833	a suitable value. The memory pointed to by C<path> must point to the same
1513	path for as long as the watcher is active.	2834	path for as long as the watcher is active.
1514		2835
1515	The callback will be receive C<EV_STAT> when a change was detected,	2836	The callback will receive an C<EV_STAT> event when a change was detected,
1516	relative to the attributes at the time the watcher was started (or the	2837	relative to the attributes at the time the watcher was started (or the
1517	last change was detected).	2838	last change was detected).
1518		2839
1519	=item ev_stat_stat (ev_stat *)	2840	=item ev_stat_stat (loop, ev_stat *)
1520		2841
1521	Updates the stat buffer immediately with new values. If you change the	2842	Updates the stat buffer immediately with new values. If you change the
1522	watched path in your callback, you could call this fucntion to avoid	2843	watched path in your callback, you could call this function to avoid
1523	detecting this change (while introducing a race condition). Can also be	2844	detecting this change (while introducing a race condition if you are not
1524	useful simply to find out the new values.	2845	the only one changing the path). Can also be useful simply to find out the
		2846	new values.
1525		2847
1526	=item ev_statdata attr [read-only]	2848	=item ev_statdata attr [read-only]
1527		2849
1528	The most-recently detected attributes of the file. Although the type is of	2850	The most-recently detected attributes of the file. Although the type is
1529	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types	2851	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types
1530	suitable for your system. If the C<st_nlink> member is C<0>, then there	2852	suitable for your system, but you can only rely on the POSIX-standardised
		2853	members to be present. If the C<st_nlink> member is C<0>, then there was
1531	was some error while C<stat>ing the file.	2854	some error while C<stat>ing the file.
1532		2855
1533	=item ev_statdata prev [read-only]	2856	=item ev_statdata prev [read-only]
1534		2857
1535	The previous attributes of the file. The callback gets invoked whenever	2858	The previous attributes of the file. The callback gets invoked whenever
1536	C<prev> != C<attr>.	2859	C<prev> != C<attr>, or, more precisely, one or more of these members
		2860	differ: C<st_dev>, C<st_ino>, C<st_mode>, C<st_nlink>, C<st_uid>,
		2861	C<st_gid>, C<st_rdev>, C<st_size>, C<st_atime>, C<st_mtime>, C<st_ctime>.
1537		2862
1538	=item ev_tstamp interval [read-only]	2863	=item ev_tstamp interval [read-only]
1539		2864
1540	The specified interval.	2865	The specified interval.
1541		2866
1542	=item const char *path [read-only]	2867	=item const char *path [read-only]
1543		2868
1544	The filesystem path that is being watched.	2869	The file system path that is being watched.
1545		2870
1546	=back	2871	=back
1547		2872
		2873	=head3 Examples
		2874
1548	Example: Watch C</etc/passwd> for attribute changes.	2875	Example: Watch C</etc/passwd> for attribute changes.
1549		2876
1550	static void	2877	static void
1551	passwd_cb (struct ev_loop *loop, ev_stat *w, int revents)	2878	passwd_cb (struct ev_loop *loop, ev_stat *w, int revents)
1552	{	2879	{
1553	/* /etc/passwd changed in some way */	2880	/* /etc/passwd changed in some way */
1554	if (w->attr.st_nlink)	2881	if (w->attr.st_nlink)
1555	{	2882	{
1556	printf ("passwd current size %ld\n", (long)w->attr.st_size);	2883	printf ("passwd current size %ld\n", (long)w->attr.st_size);
1557	printf ("passwd current atime %ld\n", (long)w->attr.st_mtime);	2884	printf ("passwd current atime %ld\n", (long)w->attr.st_mtime);
1558	printf ("passwd current mtime %ld\n", (long)w->attr.st_mtime);	2885	printf ("passwd current mtime %ld\n", (long)w->attr.st_mtime);
1559	}	2886	}
1560	else	2887	else
1561	/* you shalt not abuse printf for puts */	2888	/* you shalt not abuse printf for puts */
1562	puts ("wow, /etc/passwd is not there, expect problems. "	2889	puts ("wow, /etc/passwd is not there, expect problems. "
1563	"if this is windows, they already arrived\n");	2890	"if this is windows, they already arrived\n");
1564	}	2891	}
1565		2892
1566	...	2893	...
1567	ev_stat passwd;	2894	ev_stat passwd;
1568		2895
1569	ev_stat_init (&passwd, passwd_cb, "/etc/passwd");	2896	ev_stat_init (&passwd, passwd_cb, "/etc/passwd", 0.);
1570	ev_stat_start (loop, &passwd);	2897	ev_stat_start (loop, &passwd);
		2898
		2899	Example: Like above, but additionally use a one-second delay so we do not
		2900	miss updates (however, frequent updates will delay processing, too, so
		2901	one might do the work both on C<ev_stat> callback invocation I<and> on
		2902	C<ev_timer> callback invocation).
		2903
		2904	static ev_stat passwd;
		2905	static ev_timer timer;
		2906
		2907	static void
		2908	timer_cb (EV_P_ ev_timer *w, int revents)
		2909	{
		2910	ev_timer_stop (EV_A_ w);
		2911
		2912	/* now it's one second after the most recent passwd change */
		2913	}
		2914
		2915	static void
		2916	stat_cb (EV_P_ ev_stat *w, int revents)
		2917	{
		2918	/* reset the one-second timer */
		2919	ev_timer_again (EV_A_ &timer);
		2920	}
		2921
		2922	...
		2923	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);
		2924	ev_stat_start (loop, &passwd);
		2925	ev_timer_init (&timer, timer_cb, 0., 1.02);
1571		2926
1572		2927
1573	=head2 C<ev_idle> - when you've got nothing better to do...	2928	=head2 C<ev_idle> - when you've got nothing better to do...
1574		2929
1575	Idle watchers trigger events when no other events of the same or higher	2930	Idle watchers trigger events when no other events of the same or higher
1576	priority are pending (prepare, check and other idle watchers do not	2931	priority are pending (prepare, check and other idle watchers do not count
1577	count).	2932	as receiving "events").
1578		2933
1579	That is, as long as your process is busy handling sockets or timeouts	2934	That is, as long as your process is busy handling sockets or timeouts
1580	(or even signals, imagine) of the same or higher priority it will not be	2935	(or even signals, imagine) of the same or higher priority it will not be
1581	triggered. But when your process is idle (or only lower-priority watchers	2936	triggered. But when your process is idle (or only lower-priority watchers
1582	are pending), the idle watchers are being called once per event loop	2937	are pending), the idle watchers are being called once per event loop
…		…
1589	Apart from keeping your process non-blocking (which is a useful	2944	Apart from keeping your process non-blocking (which is a useful
1590	effect on its own sometimes), idle watchers are a good place to do	2945	effect on its own sometimes), idle watchers are a good place to do
1591	"pseudo-background processing", or delay processing stuff to after the	2946	"pseudo-background processing", or delay processing stuff to after the
1592	event loop has handled all outstanding events.	2947	event loop has handled all outstanding events.
1593		2948
		2949	=head3 Abusing an C<ev_idle> watcher for its side-effect
		2950
		2951	As long as there is at least one active idle watcher, libev will never
		2952	sleep unnecessarily. Or in other words, it will loop as fast as possible.
		2953	For this to work, the idle watcher doesn't need to be invoked at all - the
		2954	lowest priority will do.
		2955
		2956	This mode of operation can be useful together with an C<ev_check> watcher,
		2957	to do something on each event loop iteration - for example to balance load
		2958	between different connections.
		2959
		2960	See L</Abusing an ev_check watcher for its side-effect> for a longer
		2961	example.
		2962
1594	=head3 Watcher-Specific Functions and Data Members	2963	=head3 Watcher-Specific Functions and Data Members
1595		2964
1596	=over 4	2965	=over 4
1597		2966
1598	=item ev_idle_init (ev_signal *, callback)	2967	=item ev_idle_init (ev_idle *, callback)
1599		2968
1600	Initialises and configures the idle watcher - it has no parameters of any	2969	Initialises and configures the idle watcher - it has no parameters of any
1601	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,	2970	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,
1602	believe me.	2971	believe me.
1603		2972
1604	=back	2973	=back
1605		2974
		2975	=head3 Examples
		2976
1606	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the	2977	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the
1607	callback, free it. Also, use no error checking, as usual.	2978	callback, free it. Also, use no error checking, as usual.
1608		2979
1609	static void	2980	static void
1610	idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)	2981	idle_cb (struct ev_loop *loop, ev_idle *w, int revents)
1611	{	2982	{
		2983	// stop the watcher
		2984	ev_idle_stop (loop, w);
		2985
		2986	// now we can free it
1612	free (w);	2987	free (w);
		2988
1613	// now do something you wanted to do when the program has	2989	// now do something you wanted to do when the program has
1614	// no longer asnything immediate to do.	2990	// no longer anything immediate to do.
1615	}	2991	}
1616		2992
1617	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));	2993	ev_idle *idle_watcher = malloc (sizeof (ev_idle));
1618	ev_idle_init (idle_watcher, idle_cb);	2994	ev_idle_init (idle_watcher, idle_cb);
1619	ev_idle_start (loop, idle_cb);	2995	ev_idle_start (loop, idle_watcher);
1620		2996
1621		2997
1622	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!	2998	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!
1623		2999
1624	Prepare and check watchers are usually (but not always) used in tandem:	3000	Prepare and check watchers are often (but not always) used in pairs:
1625	prepare watchers get invoked before the process blocks and check watchers	3001	prepare watchers get invoked before the process blocks and check watchers
1626	afterwards.	3002	afterwards.
1627		3003
1628	You I<must not> call C<ev_loop> or similar functions that enter	3004	You I<must not> call C<ev_run> (or similar functions that enter the
1629	the current event loop from either C<ev_prepare> or C<ev_check>	3005	current event loop) or C<ev_loop_fork> from either C<ev_prepare> or
1630	watchers. Other loops than the current one are fine, however. The	3006	C<ev_check> watchers. Other loops than the current one are fine,
1631	rationale behind this is that you do not need to check for recursion in	3007	however. The rationale behind this is that you do not need to check
1632	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,	3008	for recursion in those watchers, i.e. the sequence will always be
1633	C<ev_check> so if you have one watcher of each kind they will always be	3009	C<ev_prepare>, blocking, C<ev_check> so if you have one watcher of each
1634	called in pairs bracketing the blocking call.	3010	kind they will always be called in pairs bracketing the blocking call.
1635		3011
1636	Their main purpose is to integrate other event mechanisms into libev and	3012	Their main purpose is to integrate other event mechanisms into libev and
1637	their use is somewhat advanced. This could be used, for example, to track	3013	their use is somewhat advanced. They could be used, for example, to track
1638	variable changes, implement your own watchers, integrate net-snmp or a	3014	variable changes, implement your own watchers, integrate net-snmp or a
1639	coroutine library and lots more. They are also occasionally useful if	3015	coroutine library and lots more. They are also occasionally useful if
1640	you cache some data and want to flush it before blocking (for example,	3016	you cache some data and want to flush it before blocking (for example,
1641	in X programs you might want to do an C<XFlush ()> in an C<ev_prepare>	3017	in X programs you might want to do an C<XFlush ()> in an C<ev_prepare>
1642	watcher).	3018	watcher).
1643		3019
1644	This is done by examining in each prepare call which file descriptors need	3020	This is done by examining in each prepare call which file descriptors
1645	to be watched by the other library, registering C<ev_io> watchers for	3021	need to be watched by the other library, registering C<ev_io> watchers
1646	them and starting an C<ev_timer> watcher for any timeouts (many libraries	3022	for them and starting an C<ev_timer> watcher for any timeouts (many
1647	provide just this functionality). Then, in the check watcher you check for	3023	libraries provide exactly this functionality). Then, in the check watcher,
1648	any events that occured (by checking the pending status of all watchers	3024	you check for any events that occurred (by checking the pending status
1649	and stopping them) and call back into the library. The I/O and timer	3025	of all watchers and stopping them) and call back into the library. The
1650	callbacks will never actually be called (but must be valid nevertheless,	3026	I/O and timer callbacks will never actually be called (but must be valid
1651	because you never know, you know?).	3027	nevertheless, because you never know, you know?).
1652		3028
1653	As another example, the Perl Coro module uses these hooks to integrate	3029	As another example, the Perl Coro module uses these hooks to integrate
1654	coroutines into libev programs, by yielding to other active coroutines	3030	coroutines into libev programs, by yielding to other active coroutines
1655	during each prepare and only letting the process block if no coroutines	3031	during each prepare and only letting the process block if no coroutines
1656	are ready to run (it's actually more complicated: it only runs coroutines	3032	are ready to run (it's actually more complicated: it only runs coroutines
1657	with priority higher than or equal to the event loop and one coroutine	3033	with priority higher than or equal to the event loop and one coroutine
1658	of lower priority, but only once, using idle watchers to keep the event	3034	of lower priority, but only once, using idle watchers to keep the event
1659	loop from blocking if lower-priority coroutines are active, thus mapping	3035	loop from blocking if lower-priority coroutines are active, thus mapping
1660	low-priority coroutines to idle/background tasks).	3036	low-priority coroutines to idle/background tasks).
1661		3037
1662	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)	3038	When used for this purpose, it is recommended to give C<ev_check> watchers
1663	priority, to ensure that they are being run before any other watchers	3039	highest (C<EV_MAXPRI>) priority, to ensure that they are being run before
		3040	any other watchers after the poll (this doesn't matter for C<ev_prepare>
		3041	watchers).
		3042
1664	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,	3043	Also, C<ev_check> watchers (and C<ev_prepare> watchers, too) should not
1665	too) should not activate ("feed") events into libev. While libev fully	3044	activate ("feed") events into libev. While libev fully supports this, they
1666	supports this, they will be called before other C<ev_check> watchers	3045	might get executed before other C<ev_check> watchers did their job. As
1667	did their job. As C<ev_check> watchers are often used to embed other	3046	C<ev_check> watchers are often used to embed other (non-libev) event
1668	(non-libev) event loops those other event loops might be in an unusable	3047	loops those other event loops might be in an unusable state until their
1669	state until their C<ev_check> watcher ran (always remind yourself to	3048	C<ev_check> watcher ran (always remind yourself to coexist peacefully with
1670	coexist peacefully with others).	3049	others).
		3050
		3051	=head3 Abusing an C<ev_check> watcher for its side-effect
		3052
		3053	C<ev_check> (and less often also C<ev_prepare>) watchers can also be
		3054	useful because they are called once per event loop iteration. For
		3055	example, if you want to handle a large number of connections fairly, you
		3056	normally only do a bit of work for each active connection, and if there
		3057	is more work to do, you wait for the next event loop iteration, so other
		3058	connections have a chance of making progress.
		3059
		3060	Using an C<ev_check> watcher is almost enough: it will be called on the
		3061	next event loop iteration. However, that isn't as soon as possible -
		3062	without external events, your C<ev_check> watcher will not be invoked.
		3063
		3064	This is where C<ev_idle> watchers come in handy - all you need is a
		3065	single global idle watcher that is active as long as you have one active
		3066	C<ev_check> watcher. The C<ev_idle> watcher makes sure the event loop
		3067	will not sleep, and the C<ev_check> watcher makes sure a callback gets
		3068	invoked. Neither watcher alone can do that.
1671		3069
1672	=head3 Watcher-Specific Functions and Data Members	3070	=head3 Watcher-Specific Functions and Data Members
1673		3071
1674	=over 4	3072	=over 4
1675		3073
…		…
1677		3075
1678	=item ev_check_init (ev_check *, callback)	3076	=item ev_check_init (ev_check *, callback)
1679		3077
1680	Initialises and configures the prepare or check watcher - they have no	3078	Initialises and configures the prepare or check watcher - they have no
1681	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>	3079	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>
1682	macros, but using them is utterly, utterly and completely pointless.	3080	macros, but using them is utterly, utterly, utterly and completely
		3081	pointless.
1683		3082
1684	=back	3083	=back
		3084
		3085	=head3 Examples
1685		3086
1686	There are a number of principal ways to embed other event loops or modules	3087	There are a number of principal ways to embed other event loops or modules
1687	into libev. Here are some ideas on how to include libadns into libev	3088	into libev. Here are some ideas on how to include libadns into libev
1688	(there is a Perl module named C<EV::ADNS> that does this, which you could	3089	(there is a Perl module named C<EV::ADNS> that does this, which you could
1689	use for an actually working example. Another Perl module named C<EV::Glib>	3090	use as a working example. Another Perl module named C<EV::Glib> embeds a
1690	embeds a Glib main context into libev, and finally, C<Glib::EV> embeds EV	3091	Glib main context into libev, and finally, C<Glib::EV> embeds EV into the
1691	into the Glib event loop).	3092	Glib event loop).
1692		3093
1693	Method 1: Add IO watchers and a timeout watcher in a prepare handler,	3094	Method 1: Add IO watchers and a timeout watcher in a prepare handler,
1694	and in a check watcher, destroy them and call into libadns. What follows	3095	and in a check watcher, destroy them and call into libadns. What follows
1695	is pseudo-code only of course. This requires you to either use a low	3096	is pseudo-code only of course. This requires you to either use a low
1696	priority for the check watcher or use C<ev_clear_pending> explicitly, as	3097	priority for the check watcher or use C<ev_clear_pending> explicitly, as
1697	the callbacks for the IO/timeout watchers might not have been called yet.	3098	the callbacks for the IO/timeout watchers might not have been called yet.
1698		3099
1699	static ev_io iow [nfd];	3100	static ev_io iow [nfd];
1700	static ev_timer tw;	3101	static ev_timer tw;
1701		3102
1702	static void	3103	static void
1703	io_cb (ev_loop *loop, ev_io *w, int revents)	3104	io_cb (struct ev_loop *loop, ev_io *w, int revents)
1704	{	3105	{
1705	}	3106	}
1706		3107
1707	// create io watchers for each fd and a timer before blocking	3108	// create io watchers for each fd and a timer before blocking
1708	static void	3109	static void
1709	adns_prepare_cb (ev_loop *loop, ev_prepare *w, int revents)	3110	adns_prepare_cb (struct ev_loop *loop, ev_prepare *w, int revents)
1710	{	3111	{
1711	int timeout = 3600000;	3112	int timeout = 3600000;
1712	struct pollfd fds [nfd];	3113	struct pollfd fds [nfd];
1713	// actual code will need to loop here and realloc etc.	3114	// actual code will need to loop here and realloc etc.
1714	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));	3115	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
1715		3116
1716	/* the callback is illegal, but won't be called as we stop during check */	3117	/* the callback is illegal, but won't be called as we stop during check */
1717	ev_timer_init (&tw, 0, timeout * 1e-3);	3118	ev_timer_init (&tw, 0, timeout * 1e-3, 0.);
1718	ev_timer_start (loop, &tw);	3119	ev_timer_start (loop, &tw);
1719		3120
1720	// create one ev_io per pollfd	3121	// create one ev_io per pollfd
1721	for (int i = 0; i < nfd; ++i)	3122	for (int i = 0; i < nfd; ++i)
1722	{	3123	{
1723	ev_io_init (iow + i, io_cb, fds [i].fd,	3124	ev_io_init (iow + i, io_cb, fds [i].fd,
1724	((fds [i].events & POLLIN ? EV_READ : 0)	3125	((fds [i].events & POLLIN ? EV_READ : 0)
1725	| (fds [i].events & POLLOUT ? EV_WRITE : 0)));	3126	| (fds [i].events & POLLOUT ? EV_WRITE : 0)));
1726		3127
1727	fds [i].revents = 0;	3128	fds [i].revents = 0;
1728	ev_io_start (loop, iow + i);	3129	ev_io_start (loop, iow + i);
1729	}	3130	}
1730	}	3131	}
1731		3132
1732	// stop all watchers after blocking	3133	// stop all watchers after blocking
1733	static void	3134	static void
1734	adns_check_cb (ev_loop *loop, ev_check *w, int revents)	3135	adns_check_cb (struct ev_loop *loop, ev_check *w, int revents)
1735	{	3136	{
1736	ev_timer_stop (loop, &tw);	3137	ev_timer_stop (loop, &tw);
1737		3138
1738	for (int i = 0; i < nfd; ++i)	3139	for (int i = 0; i < nfd; ++i)
1739	{	3140	{
1740	// set the relevant poll flags	3141	// set the relevant poll flags
1741	// could also call adns_processreadable etc. here	3142	// could also call adns_processreadable etc. here
1742	struct pollfd *fd = fds + i;	3143	struct pollfd *fd = fds + i;
1743	int revents = ev_clear_pending (iow + i);	3144	int revents = ev_clear_pending (iow + i);
1744	if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;	3145	if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;
1745	if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;	3146	if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;
1746		3147
1747	// now stop the watcher	3148	// now stop the watcher
1748	ev_io_stop (loop, iow + i);	3149	ev_io_stop (loop, iow + i);
1749	}	3150	}
1750		3151
1751	adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));	3152	adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));
1752	}	3153	}
1753		3154
1754	Method 2: This would be just like method 1, but you run C<adns_afterpoll>	3155	Method 2: This would be just like method 1, but you run C<adns_afterpoll>
1755	in the prepare watcher and would dispose of the check watcher.	3156	in the prepare watcher and would dispose of the check watcher.
1756		3157
1757	Method 3: If the module to be embedded supports explicit event	3158	Method 3: If the module to be embedded supports explicit event
1758	notification (adns does), you can also make use of the actual watcher	3159	notification (libadns does), you can also make use of the actual watcher
1759	callbacks, and only destroy/create the watchers in the prepare watcher.	3160	callbacks, and only destroy/create the watchers in the prepare watcher.
1760		3161
1761	static void	3162	static void
1762	timer_cb (EV_P_ ev_timer *w, int revents)	3163	timer_cb (EV_P_ ev_timer *w, int revents)
1763	{	3164	{
1764	adns_state ads = (adns_state)w->data;	3165	adns_state ads = (adns_state)w->data;
1765	update_now (EV_A);	3166	update_now (EV_A);
1766		3167
1767	adns_processtimeouts (ads, &tv_now);	3168	adns_processtimeouts (ads, &tv_now);
1768	}	3169	}
1769		3170
1770	static void	3171	static void
1771	io_cb (EV_P_ ev_io *w, int revents)	3172	io_cb (EV_P_ ev_io *w, int revents)
1772	{	3173	{
1773	adns_state ads = (adns_state)w->data;	3174	adns_state ads = (adns_state)w->data;
1774	update_now (EV_A);	3175	update_now (EV_A);
1775		3176
1776	if (revents & EV_READ ) adns_processreadable (ads, w->fd, &tv_now);	3177	if (revents & EV_READ ) adns_processreadable (ads, w->fd, &tv_now);
1777	if (revents & EV_WRITE) adns_processwriteable (ads, w->fd, &tv_now);	3178	if (revents & EV_WRITE) adns_processwriteable (ads, w->fd, &tv_now);
1778	}	3179	}
1779		3180
1780	// do not ever call adns_afterpoll	3181	// do not ever call adns_afterpoll
1781		3182
1782	Method 4: Do not use a prepare or check watcher because the module you	3183	Method 4: Do not use a prepare or check watcher because the module you
1783	want to embed is too inflexible to support it. Instead, youc na override	3184	want to embed is not flexible enough to support it. Instead, you can
1784	their poll function. The drawback with this solution is that the main	3185	override their poll function. The drawback with this solution is that the
1785	loop is now no longer controllable by EV. The C<Glib::EV> module does	3186	main loop is now no longer controllable by EV. The C<Glib::EV> module uses
1786	this.	3187	this approach, effectively embedding EV as a client into the horrible
		3188	libglib event loop.
1787		3189
1788	static gint	3190	static gint
1789	event_poll_func (GPollFD *fds, guint nfds, gint timeout)	3191	event_poll_func (GPollFD *fds, guint nfds, gint timeout)
1790	{	3192	{
1791	int got_events = 0;	3193	int got_events = 0;
1792		3194
1793	for (n = 0; n < nfds; ++n)	3195	for (n = 0; n < nfds; ++n)
1794	// create/start io watcher that sets the relevant bits in fds[n] and increment got_events	3196	// create/start io watcher that sets the relevant bits in fds[n] and increment got_events
1795		3197
1796	if (timeout >= 0)	3198	if (timeout >= 0)
1797	// create/start timer	3199	// create/start timer
1798		3200
1799	// poll	3201	// poll
1800	ev_loop (EV_A_ 0);	3202	ev_run (EV_A_ 0);
1801		3203
1802	// stop timer again	3204	// stop timer again
1803	if (timeout >= 0)	3205	if (timeout >= 0)
1804	ev_timer_stop (EV_A_ &to);	3206	ev_timer_stop (EV_A_ &to);
1805		3207
1806	// stop io watchers again - their callbacks should have set	3208	// stop io watchers again - their callbacks should have set
1807	for (n = 0; n < nfds; ++n)	3209	for (n = 0; n < nfds; ++n)
1808	ev_io_stop (EV_A_ iow [n]);	3210	ev_io_stop (EV_A_ iow [n]);
1809		3211
1810	return got_events;	3212	return got_events;
1811	}	3213	}
1812		3214
1813		3215
1814	=head2 C<ev_embed> - when one backend isn't enough...	3216	=head2 C<ev_embed> - when one backend isn't enough...
1815		3217
1816	This is a rather advanced watcher type that lets you embed one event loop	3218	This is a rather advanced watcher type that lets you embed one event loop
…		…
1822	prioritise I/O.	3224	prioritise I/O.
1823		3225
1824	As an example for a bug workaround, the kqueue backend might only support	3226	As an example for a bug workaround, the kqueue backend might only support
1825	sockets on some platform, so it is unusable as generic backend, but you	3227	sockets on some platform, so it is unusable as generic backend, but you
1826	still want to make use of it because you have many sockets and it scales	3228	still want to make use of it because you have many sockets and it scales
1827	so nicely. In this case, you would create a kqueue-based loop and embed it	3229	so nicely. In this case, you would create a kqueue-based loop and embed
1828	into your default loop (which might use e.g. poll). Overall operation will	3230	it into your default loop (which might use e.g. poll). Overall operation
1829	be a bit slower because first libev has to poll and then call kevent, but	3231	will be a bit slower because first libev has to call C<poll> and then
1830	at least you can use both at what they are best.	3232	C<kevent>, but at least you can use both mechanisms for what they are
		3233	best: C<kqueue> for scalable sockets and C<poll> if you want it to work :)
1831		3234
1832	As for prioritising I/O: rarely you have the case where some fds have	3235	As for prioritising I/O: under rare circumstances you have the case where
1833	to be watched and handled very quickly (with low latency), and even	3236	some fds have to be watched and handled very quickly (with low latency),
1834	priorities and idle watchers might have too much overhead. In this case	3237	and even priorities and idle watchers might have too much overhead. In
1835	you would put all the high priority stuff in one loop and all the rest in	3238	this case you would put all the high priority stuff in one loop and all
1836	a second one, and embed the second one in the first.	3239	the rest in a second one, and embed the second one in the first.
1837		3240
1838	As long as the watcher is active, the callback will be invoked every time	3241	As long as the watcher is active, the callback will be invoked every
1839	there might be events pending in the embedded loop. The callback must then	3242	time there might be events pending in the embedded loop. The callback
1840	call C<ev_embed_sweep (mainloop, watcher)> to make a single sweep and invoke	3243	must then call C<ev_embed_sweep (mainloop, watcher)> to make a single
1841	their callbacks (you could also start an idle watcher to give the embedded	3244	sweep and invoke their callbacks (the callback doesn't need to invoke the
1842	loop strictly lower priority for example). You can also set the callback	3245	C<ev_embed_sweep> function directly, it could also start an idle watcher
1843	to C<0>, in which case the embed watcher will automatically execute the	3246	to give the embedded loop strictly lower priority for example).
1844	embedded loop sweep.
1845		3247
1846	As long as the watcher is started it will automatically handle events. The	3248	You can also set the callback to C<0>, in which case the embed watcher
1847	callback will be invoked whenever some events have been handled. You can	3249	will automatically execute the embedded loop sweep whenever necessary.
1848	set the callback to C<0> to avoid having to specify one if you are not
1849	interested in that.
1850		3250
1851	Also, there have not currently been made special provisions for forking:	3251	Fork detection will be handled transparently while the C<ev_embed> watcher
1852	when you fork, you not only have to call C<ev_loop_fork> on both loops,	3252	is active, i.e., the embedded loop will automatically be forked when the
1853	but you will also have to stop and restart any C<ev_embed> watchers	3253	embedding loop forks. In other cases, the user is responsible for calling
1854	yourself.	3254	C<ev_loop_fork> on the embedded loop.
1855		3255
1856	Unfortunately, not all backends are embeddable, only the ones returned by	3256	Unfortunately, not all backends are embeddable: only the ones returned by
1857	C<ev_embeddable_backends> are, which, unfortunately, does not include any	3257	C<ev_embeddable_backends> are, which, unfortunately, does not include any
1858	portable one.	3258	portable one.
1859		3259
1860	So when you want to use this feature you will always have to be prepared	3260	So when you want to use this feature you will always have to be prepared
1861	that you cannot get an embeddable loop. The recommended way to get around	3261	that you cannot get an embeddable loop. The recommended way to get around
1862	this is to have a separate variables for your embeddable loop, try to	3262	this is to have a separate variables for your embeddable loop, try to
1863	create it, and if that fails, use the normal loop for everything:	3263	create it, and if that fails, use the normal loop for everything.
1864		3264
1865	struct ev_loop *loop_hi = ev_default_init (0);	3265	=head3 C<ev_embed> and fork
1866	struct ev_loop *loop_lo = 0;
1867	struct ev_embed embed;
1868
1869	// see if there is a chance of getting one that works
1870	// (remember that a flags value of 0 means autodetection)
1871	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()
1872	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())
1873	: 0;
1874		3266
1875	// if we got one, then embed it, otherwise default to loop_hi	3267	While the C<ev_embed> watcher is running, forks in the embedding loop will
1876	if (loop_lo)	3268	automatically be applied to the embedded loop as well, so no special
1877	{	3269	fork handling is required in that case. When the watcher is not running,
1878	ev_embed_init (&embed, 0, loop_lo);	3270	however, it is still the task of the libev user to call C<ev_loop_fork ()>
1879	ev_embed_start (loop_hi, &embed);	3271	as applicable.
1880	}
1881	else
1882	loop_lo = loop_hi;
1883		3272
1884	=head3 Watcher-Specific Functions and Data Members	3273	=head3 Watcher-Specific Functions and Data Members
1885		3274
1886	=over 4	3275	=over 4
1887		3276
1888	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)	3277	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
1889		3278
1890	=item ev_embed_set (ev_embed *, callback, struct ev_loop *embedded_loop)	3279	=item ev_embed_set (ev_embed *, struct ev_loop *embedded_loop)
1891		3280
1892	Configures the watcher to embed the given loop, which must be	3281	Configures the watcher to embed the given loop, which must be
1893	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be	3282	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
1894	invoked automatically, otherwise it is the responsibility of the callback	3283	invoked automatically, otherwise it is the responsibility of the callback
1895	to invoke it (it will continue to be called until the sweep has been done,	3284	to invoke it (it will continue to be called until the sweep has been done,
1896	if you do not want thta, you need to temporarily stop the embed watcher).	3285	if you do not want that, you need to temporarily stop the embed watcher).
1897		3286
1898	=item ev_embed_sweep (loop, ev_embed *)	3287	=item ev_embed_sweep (loop, ev_embed *)
1899		3288
1900	Make a single, non-blocking sweep over the embedded loop. This works	3289	Make a single, non-blocking sweep over the embedded loop. This works
1901	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	3290	similarly to C<ev_run (embedded_loop, EVRUN_NOWAIT)>, but in the most
1902	apropriate way for embedded loops.	3291	appropriate way for embedded loops.
1903		3292
1904	=item struct ev_loop *other [read-only]	3293	=item struct ev_loop *other [read-only]
1905		3294
1906	The embedded event loop.	3295	The embedded event loop.
1907		3296
1908	=back	3297	=back
		3298
		3299	=head3 Examples
		3300
		3301	Example: Try to get an embeddable event loop and embed it into the default
		3302	event loop. If that is not possible, use the default loop. The default
		3303	loop is stored in C<loop_hi>, while the embeddable loop is stored in
		3304	C<loop_lo> (which is C<loop_hi> in the case no embeddable loop can be
		3305	used).
		3306
		3307	struct ev_loop *loop_hi = ev_default_init (0);
		3308	struct ev_loop *loop_lo = 0;
		3309	ev_embed embed;
		3310
		3311	// see if there is a chance of getting one that works
		3312	// (remember that a flags value of 0 means autodetection)
		3313	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()
		3314	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())
		3315	: 0;
		3316
		3317	// if we got one, then embed it, otherwise default to loop_hi
		3318	if (loop_lo)
		3319	{
		3320	ev_embed_init (&embed, 0, loop_lo);
		3321	ev_embed_start (loop_hi, &embed);
		3322	}
		3323	else
		3324	loop_lo = loop_hi;
		3325
		3326	Example: Check if kqueue is available but not recommended and create
		3327	a kqueue backend for use with sockets (which usually work with any
		3328	kqueue implementation). Store the kqueue/socket-only event loop in
		3329	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
		3330
		3331	struct ev_loop *loop = ev_default_init (0);
		3332	struct ev_loop *loop_socket = 0;
		3333	ev_embed embed;
		3334
		3335	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
		3336	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
		3337	{
		3338	ev_embed_init (&embed, 0, loop_socket);
		3339	ev_embed_start (loop, &embed);
		3340	}
		3341
		3342	if (!loop_socket)
		3343	loop_socket = loop;
		3344
		3345	// now use loop_socket for all sockets, and loop for everything else
1909		3346
1910		3347
1911	=head2 C<ev_fork> - the audacity to resume the event loop after a fork	3348	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
1912		3349
1913	Fork watchers are called when a C<fork ()> was detected (usually because	3350	Fork watchers are called when a C<fork ()> was detected (usually because
1914	whoever is a good citizen cared to tell libev about it by calling	3351	whoever is a good citizen cared to tell libev about it by calling
1915	C<ev_default_fork> or C<ev_loop_fork>). The invocation is done before the	3352	C<ev_loop_fork>). The invocation is done before the event loop blocks next
1916	event loop blocks next and before C<ev_check> watchers are being called,	3353	and before C<ev_check> watchers are being called, and only in the child
1917	and only in the child after the fork. If whoever good citizen calling	3354	after the fork. If whoever good citizen calling C<ev_default_fork> cheats
1918	C<ev_default_fork> cheats and calls it in the wrong process, the fork	3355	and calls it in the wrong process, the fork handlers will be invoked, too,
1919	handlers will be invoked, too, of course.	3356	of course.
		3357
		3358	=head3 The special problem of life after fork - how is it possible?
		3359
		3360	Most uses of C<fork ()> consist of forking, then some simple calls to set
		3361	up/change the process environment, followed by a call to C<exec()>. This
		3362	sequence should be handled by libev without any problems.
		3363
		3364	This changes when the application actually wants to do event handling
		3365	in the child, or both parent in child, in effect "continuing" after the
		3366	fork.
		3367
		3368	The default mode of operation (for libev, with application help to detect
		3369	forks) is to duplicate all the state in the child, as would be expected
		3370	when I<either> the parent I<or> the child process continues.
		3371
		3372	When both processes want to continue using libev, then this is usually the
		3373	wrong result. In that case, usually one process (typically the parent) is
		3374	supposed to continue with all watchers in place as before, while the other
		3375	process typically wants to start fresh, i.e. without any active watchers.
		3376
		3377	The cleanest and most efficient way to achieve that with libev is to
		3378	simply create a new event loop, which of course will be "empty", and
		3379	use that for new watchers. This has the advantage of not touching more
		3380	memory than necessary, and thus avoiding the copy-on-write, and the
		3381	disadvantage of having to use multiple event loops (which do not support
		3382	signal watchers).
		3383
		3384	When this is not possible, or you want to use the default loop for
		3385	other reasons, then in the process that wants to start "fresh", call
		3386	C<ev_loop_destroy (EV_DEFAULT)> followed by C<ev_default_loop (...)>.
		3387	Destroying the default loop will "orphan" (not stop) all registered
		3388	watchers, so you have to be careful not to execute code that modifies
		3389	those watchers. Note also that in that case, you have to re-register any
		3390	signal watchers.
1920		3391
1921	=head3 Watcher-Specific Functions and Data Members	3392	=head3 Watcher-Specific Functions and Data Members
1922		3393
1923	=over 4	3394	=over 4
1924		3395
1925	=item ev_fork_init (ev_signal *, callback)	3396	=item ev_fork_init (ev_fork *, callback)
1926		3397
1927	Initialises and configures the fork watcher - it has no parameters of any	3398	Initialises and configures the fork watcher - it has no parameters of any
1928	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	3399	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
1929	believe me.	3400	really.
1930		3401
1931	=back	3402	=back
1932		3403
1933		3404
		3405	=head2 C<ev_cleanup> - even the best things end
		3406
		3407	Cleanup watchers are called just before the event loop is being destroyed
		3408	by a call to C<ev_loop_destroy>.
		3409
		3410	While there is no guarantee that the event loop gets destroyed, cleanup
		3411	watchers provide a convenient method to install cleanup hooks for your
		3412	program, worker threads and so on - you just to make sure to destroy the
		3413	loop when you want them to be invoked.
		3414
		3415	Cleanup watchers are invoked in the same way as any other watcher. Unlike
		3416	all other watchers, they do not keep a reference to the event loop (which
		3417	makes a lot of sense if you think about it). Like all other watchers, you
		3418	can call libev functions in the callback, except C<ev_cleanup_start>.
		3419
		3420	=head3 Watcher-Specific Functions and Data Members
		3421
		3422	=over 4
		3423
		3424	=item ev_cleanup_init (ev_cleanup *, callback)
		3425
		3426	Initialises and configures the cleanup watcher - it has no parameters of
		3427	any kind. There is a C<ev_cleanup_set> macro, but using it is utterly
		3428	pointless, I assure you.
		3429
		3430	=back
		3431
		3432	Example: Register an atexit handler to destroy the default loop, so any
		3433	cleanup functions are called.
		3434
		3435	static void
		3436	program_exits (void)
		3437	{
		3438	ev_loop_destroy (EV_DEFAULT_UC);
		3439	}
		3440
		3441	...
		3442	atexit (program_exits);
		3443
		3444
		3445	=head2 C<ev_async> - how to wake up an event loop
		3446
		3447	In general, you cannot use an C<ev_loop> from multiple threads or other
		3448	asynchronous sources such as signal handlers (as opposed to multiple event
		3449	loops - those are of course safe to use in different threads).
		3450
		3451	Sometimes, however, you need to wake up an event loop you do not control,
		3452	for example because it belongs to another thread. This is what C<ev_async>
		3453	watchers do: as long as the C<ev_async> watcher is active, you can signal
		3454	it by calling C<ev_async_send>, which is thread- and signal safe.
		3455
		3456	This functionality is very similar to C<ev_signal> watchers, as signals,
		3457	too, are asynchronous in nature, and signals, too, will be compressed
		3458	(i.e. the number of callback invocations may be less than the number of
		3459	C<ev_async_send> calls). In fact, you could use signal watchers as a kind
		3460	of "global async watchers" by using a watcher on an otherwise unused
		3461	signal, and C<ev_feed_signal> to signal this watcher from another thread,
		3462	even without knowing which loop owns the signal.
		3463
		3464	=head3 Queueing
		3465
		3466	C<ev_async> does not support queueing of data in any way. The reason
		3467	is that the author does not know of a simple (or any) algorithm for a
		3468	multiple-writer-single-reader queue that works in all cases and doesn't
		3469	need elaborate support such as pthreads or unportable memory access
		3470	semantics.
		3471
		3472	That means that if you want to queue data, you have to provide your own
		3473	queue. But at least I can tell you how to implement locking around your
		3474	queue:
		3475
		3476	=over 4
		3477
		3478	=item queueing from a signal handler context
		3479
		3480	To implement race-free queueing, you simply add to the queue in the signal
		3481	handler but you block the signal handler in the watcher callback. Here is
		3482	an example that does that for some fictitious SIGUSR1 handler:
		3483
		3484	static ev_async mysig;
		3485
		3486	static void
		3487	sigusr1_handler (void)
		3488	{
		3489	sometype data;
		3490
		3491	// no locking etc.
		3492	queue_put (data);
		3493	ev_async_send (EV_DEFAULT_ &mysig);
		3494	}
		3495
		3496	static void
		3497	mysig_cb (EV_P_ ev_async *w, int revents)
		3498	{
		3499	sometype data;
		3500	sigset_t block, prev;
		3501
		3502	sigemptyset (&block);
		3503	sigaddset (&block, SIGUSR1);
		3504	sigprocmask (SIG_BLOCK, &block, &prev);
		3505
		3506	while (queue_get (&data))
		3507	process (data);
		3508
		3509	if (sigismember (&prev, SIGUSR1)
		3510	sigprocmask (SIG_UNBLOCK, &block, 0);
		3511	}
		3512
		3513	(Note: pthreads in theory requires you to use C<pthread_setmask>
		3514	instead of C<sigprocmask> when you use threads, but libev doesn't do it
		3515	either...).
		3516
		3517	=item queueing from a thread context
		3518
		3519	The strategy for threads is different, as you cannot (easily) block
		3520	threads but you can easily preempt them, so to queue safely you need to
		3521	employ a traditional mutex lock, such as in this pthread example:
		3522
		3523	static ev_async mysig;
		3524	static pthread_mutex_t mymutex = PTHREAD_MUTEX_INITIALIZER;
		3525
		3526	static void
		3527	otherthread (void)
		3528	{
		3529	// only need to lock the actual queueing operation
		3530	pthread_mutex_lock (&mymutex);
		3531	queue_put (data);
		3532	pthread_mutex_unlock (&mymutex);
		3533
		3534	ev_async_send (EV_DEFAULT_ &mysig);
		3535	}
		3536
		3537	static void
		3538	mysig_cb (EV_P_ ev_async *w, int revents)
		3539	{
		3540	pthread_mutex_lock (&mymutex);
		3541
		3542	while (queue_get (&data))
		3543	process (data);
		3544
		3545	pthread_mutex_unlock (&mymutex);
		3546	}
		3547
		3548	=back
		3549
		3550
		3551	=head3 Watcher-Specific Functions and Data Members
		3552
		3553	=over 4
		3554
		3555	=item ev_async_init (ev_async *, callback)
		3556
		3557	Initialises and configures the async watcher - it has no parameters of any
		3558	kind. There is a C<ev_async_set> macro, but using it is utterly pointless,
		3559	trust me.
		3560
		3561	=item ev_async_send (loop, ev_async *)
		3562
		3563	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
		3564	an C<EV_ASYNC> event on the watcher into the event loop, and instantly
		3565	returns.
		3566
		3567	Unlike C<ev_feed_event>, this call is safe to do from other threads,
		3568	signal or similar contexts (see the discussion of C<EV_ATOMIC_T> in the
		3569	embedding section below on what exactly this means).
		3570
		3571	Note that, as with other watchers in libev, multiple events might get
		3572	compressed into a single callback invocation (another way to look at
		3573	this is that C<ev_async> watchers are level-triggered: they are set on
		3574	C<ev_async_send>, reset when the event loop detects that).
		3575
		3576	This call incurs the overhead of at most one extra system call per event
		3577	loop iteration, if the event loop is blocked, and no syscall at all if
		3578	the event loop (or your program) is processing events. That means that
		3579	repeated calls are basically free (there is no need to avoid calls for
		3580	performance reasons) and that the overhead becomes smaller (typically
		3581	zero) under load.
		3582
		3583	=item bool = ev_async_pending (ev_async *)
		3584
		3585	Returns a non-zero value when C<ev_async_send> has been called on the
		3586	watcher but the event has not yet been processed (or even noted) by the
		3587	event loop.
		3588
		3589	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When
		3590	the loop iterates next and checks for the watcher to have become active,
		3591	it will reset the flag again. C<ev_async_pending> can be used to very
		3592	quickly check whether invoking the loop might be a good idea.
		3593
		3594	Not that this does I<not> check whether the watcher itself is pending,
		3595	only whether it has been requested to make this watcher pending: there
		3596	is a time window between the event loop checking and resetting the async
		3597	notification, and the callback being invoked.
		3598
		3599	=back
		3600
		3601
1934	=head1 OTHER FUNCTIONS	3602	=head1 OTHER FUNCTIONS
1935		3603
1936	There are some other functions of possible interest. Described. Here. Now.	3604	There are some other functions of possible interest. Described. Here. Now.
1937		3605
1938	=over 4	3606	=over 4
1939		3607
1940	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback)	3608	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback, arg)
1941		3609
1942	This function combines a simple timer and an I/O watcher, calls your	3610	This function combines a simple timer and an I/O watcher, calls your
1943	callback on whichever event happens first and automatically stop both	3611	callback on whichever event happens first and automatically stops both
1944	watchers. This is useful if you want to wait for a single event on an fd	3612	watchers. This is useful if you want to wait for a single event on an fd
1945	or timeout without having to allocate/configure/start/stop/free one or	3613	or timeout without having to allocate/configure/start/stop/free one or
1946	more watchers yourself.	3614	more watchers yourself.
1947		3615
1948	If C<fd> is less than 0, then no I/O watcher will be started and events	3616	If C<fd> is less than 0, then no I/O watcher will be started and the
1949	is being ignored. Otherwise, an C<ev_io> watcher for the given C<fd> and	3617	C<events> argument is being ignored. Otherwise, an C<ev_io> watcher for
1950	C<events> set will be craeted and started.	3618	the given C<fd> and C<events> set will be created and started.
1951		3619
1952	If C<timeout> is less than 0, then no timeout watcher will be	3620	If C<timeout> is less than 0, then no timeout watcher will be
1953	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and	3621	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
1954	repeat = 0) will be started. While C<0> is a valid timeout, it is of	3622	repeat = 0) will be started. C<0> is a valid timeout.
1955	dubious value.
1956		3623
1957	The callback has the type C<void (*cb)(int revents, void *arg)> and gets	3624	The callback has the type C<void (*cb)(int revents, void *arg)> and is
1958	passed an C<revents> set like normal event callbacks (a combination of	3625	passed an C<revents> set like normal event callbacks (a combination of
1959	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>	3626	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMER>) and the C<arg>
1960	value passed to C<ev_once>:	3627	value passed to C<ev_once>. Note that it is possible to receive I<both>
		3628	a timeout and an io event at the same time - you probably should give io
		3629	events precedence.
1961		3630
		3631	Example: wait up to ten seconds for data to appear on STDIN_FILENO.
		3632
1962	static void stdin_ready (int revents, void *arg)	3633	static void stdin_ready (int revents, void *arg)
		3634	{
		3635	if (revents & EV_READ)
		3636	/* stdin might have data for us, joy! */;
		3637	else if (revents & EV_TIMER)
		3638	/* doh, nothing entered */;
		3639	}
		3640
		3641	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
		3642
		3643	=item ev_feed_fd_event (loop, int fd, int revents)
		3644
		3645	Feed an event on the given fd, as if a file descriptor backend detected
		3646	the given events.
		3647
		3648	=item ev_feed_signal_event (loop, int signum)
		3649
		3650	Feed an event as if the given signal occurred. See also C<ev_feed_signal>,
		3651	which is async-safe.
		3652
		3653	=back
		3654
		3655
		3656	=head1 COMMON OR USEFUL IDIOMS (OR BOTH)
		3657
		3658	This section explains some common idioms that are not immediately
		3659	obvious. Note that examples are sprinkled over the whole manual, and this
		3660	section only contains stuff that wouldn't fit anywhere else.
		3661
		3662	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
		3663
		3664	Each watcher has, by default, a C<void *data> member that you can read
		3665	or modify at any time: libev will completely ignore it. This can be used
		3666	to associate arbitrary data with your watcher. If you need more data and
		3667	don't want to allocate memory separately and store a pointer to it in that
		3668	data member, you can also "subclass" the watcher type and provide your own
		3669	data:
		3670
		3671	struct my_io
		3672	{
		3673	ev_io io;
		3674	int otherfd;
		3675	void *somedata;
		3676	struct whatever *mostinteresting;
		3677	};
		3678
		3679	...
		3680	struct my_io w;
		3681	ev_io_init (&w.io, my_cb, fd, EV_READ);
		3682
		3683	And since your callback will be called with a pointer to the watcher, you
		3684	can cast it back to your own type:
		3685
		3686	static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)
		3687	{
		3688	struct my_io *w = (struct my_io *)w_;
		3689	...
		3690	}
		3691
		3692	More interesting and less C-conformant ways of casting your callback
		3693	function type instead have been omitted.
		3694
		3695	=head2 BUILDING YOUR OWN COMPOSITE WATCHERS
		3696
		3697	Another common scenario is to use some data structure with multiple
		3698	embedded watchers, in effect creating your own watcher that combines
		3699	multiple libev event sources into one "super-watcher":
		3700
		3701	struct my_biggy
		3702	{
		3703	int some_data;
		3704	ev_timer t1;
		3705	ev_timer t2;
		3706	}
		3707
		3708	In this case getting the pointer to C<my_biggy> is a bit more
		3709	complicated: Either you store the address of your C<my_biggy> struct in
		3710	the C<data> member of the watcher (for woozies or C++ coders), or you need
		3711	to use some pointer arithmetic using C<offsetof> inside your watchers (for
		3712	real programmers):
		3713
		3714	#include <stddef.h>
		3715
		3716	static void
		3717	t1_cb (EV_P_ ev_timer *w, int revents)
		3718	{
		3719	struct my_biggy big = (struct my_biggy *)
		3720	(((char *)w) - offsetof (struct my_biggy, t1));
		3721	}
		3722
		3723	static void
		3724	t2_cb (EV_P_ ev_timer *w, int revents)
		3725	{
		3726	struct my_biggy big = (struct my_biggy *)
		3727	(((char *)w) - offsetof (struct my_biggy, t2));
		3728	}
		3729
		3730	=head2 AVOIDING FINISHING BEFORE RETURNING
		3731
		3732	Often you have structures like this in event-based programs:
		3733
		3734	callback ()
1963	{	3735	{
1964	if (revents & EV_TIMEOUT)	3736	free (request);
1965	/* doh, nothing entered */;
1966	else if (revents & EV_READ)
1967	/* stdin might have data for us, joy! */;
1968	}	3737	}
1969		3738
1970	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	3739	request = start_new_request (..., callback);
1971		3740
1972	=item ev_feed_event (ev_loop *, watcher *, int revents)	3741	The intent is to start some "lengthy" operation. The C<request> could be
		3742	used to cancel the operation, or do other things with it.
1973		3743
1974	Feeds the given event set into the event loop, as if the specified event	3744	It's not uncommon to have code paths in C<start_new_request> that
1975	had happened for the specified watcher (which must be a pointer to an	3745	immediately invoke the callback, for example, to report errors. Or you add
1976	initialised but not necessarily started event watcher).	3746	some caching layer that finds that it can skip the lengthy aspects of the
		3747	operation and simply invoke the callback with the result.
1977		3748
1978	=item ev_feed_fd_event (ev_loop *, int fd, int revents)	3749	The problem here is that this will happen I<before> C<start_new_request>
		3750	has returned, so C<request> is not set.
1979		3751
1980	Feed an event on the given fd, as if a file descriptor backend detected	3752	Even if you pass the request by some safer means to the callback, you
1981	the given events it.	3753	might want to do something to the request after starting it, such as
		3754	canceling it, which probably isn't working so well when the callback has
		3755	already been invoked.
1982		3756
1983	=item ev_feed_signal_event (ev_loop *loop, int signum)	3757	A common way around all these issues is to make sure that
		3758	C<start_new_request> I<always> returns before the callback is invoked. If
		3759	C<start_new_request> immediately knows the result, it can artificially
		3760	delay invoking the callback by using a C<prepare> or C<idle> watcher for
		3761	example, or more sneakily, by reusing an existing (stopped) watcher and
		3762	pushing it into the pending queue:
1984		3763
1985	Feed an event as if the given signal occured (C<loop> must be the default	3764	ev_set_cb (watcher, callback);
1986	loop!).	3765	ev_feed_event (EV_A_ watcher, 0);
1987		3766
1988	=back	3767	This way, C<start_new_request> can safely return before the callback is
		3768	invoked, while not delaying callback invocation too much.
		3769
		3770	=head2 MODEL/NESTED EVENT LOOP INVOCATIONS AND EXIT CONDITIONS
		3771
		3772	Often (especially in GUI toolkits) there are places where you have
		3773	I<modal> interaction, which is most easily implemented by recursively
		3774	invoking C<ev_run>.
		3775
		3776	This brings the problem of exiting - a callback might want to finish the
		3777	main C<ev_run> call, but not the nested one (e.g. user clicked "Quit", but
		3778	a modal "Are you sure?" dialog is still waiting), or just the nested one
		3779	and not the main one (e.g. user clocked "Ok" in a modal dialog), or some
		3780	other combination: In these cases, a simple C<ev_break> will not work.
		3781
		3782	The solution is to maintain "break this loop" variable for each C<ev_run>
		3783	invocation, and use a loop around C<ev_run> until the condition is
		3784	triggered, using C<EVRUN_ONCE>:
		3785
		3786	// main loop
		3787	int exit_main_loop = 0;
		3788
		3789	while (!exit_main_loop)
		3790	ev_run (EV_DEFAULT_ EVRUN_ONCE);
		3791
		3792	// in a modal watcher
		3793	int exit_nested_loop = 0;
		3794
		3795	while (!exit_nested_loop)
		3796	ev_run (EV_A_ EVRUN_ONCE);
		3797
		3798	To exit from any of these loops, just set the corresponding exit variable:
		3799
		3800	// exit modal loop
		3801	exit_nested_loop = 1;
		3802
		3803	// exit main program, after modal loop is finished
		3804	exit_main_loop = 1;
		3805
		3806	// exit both
		3807	exit_main_loop = exit_nested_loop = 1;
		3808
		3809	=head2 THREAD LOCKING EXAMPLE
		3810
		3811	Here is a fictitious example of how to run an event loop in a different
		3812	thread from where callbacks are being invoked and watchers are
		3813	created/added/removed.
		3814
		3815	For a real-world example, see the C<EV::Loop::Async> perl module,
		3816	which uses exactly this technique (which is suited for many high-level
		3817	languages).
		3818
		3819	The example uses a pthread mutex to protect the loop data, a condition
		3820	variable to wait for callback invocations, an async watcher to notify the
		3821	event loop thread and an unspecified mechanism to wake up the main thread.
		3822
		3823	First, you need to associate some data with the event loop:
		3824
		3825	typedef struct {
		3826	mutex_t lock; /* global loop lock */
		3827	ev_async async_w;
		3828	thread_t tid;
		3829	cond_t invoke_cv;
		3830	} userdata;
		3831
		3832	void prepare_loop (EV_P)
		3833	{
		3834	// for simplicity, we use a static userdata struct.
		3835	static userdata u;
		3836
		3837	ev_async_init (&u->async_w, async_cb);
		3838	ev_async_start (EV_A_ &u->async_w);
		3839
		3840	pthread_mutex_init (&u->lock, 0);
		3841	pthread_cond_init (&u->invoke_cv, 0);
		3842
		3843	// now associate this with the loop
		3844	ev_set_userdata (EV_A_ u);
		3845	ev_set_invoke_pending_cb (EV_A_ l_invoke);
		3846	ev_set_loop_release_cb (EV_A_ l_release, l_acquire);
		3847
		3848	// then create the thread running ev_run
		3849	pthread_create (&u->tid, 0, l_run, EV_A);
		3850	}
		3851
		3852	The callback for the C<ev_async> watcher does nothing: the watcher is used
		3853	solely to wake up the event loop so it takes notice of any new watchers
		3854	that might have been added:
		3855
		3856	static void
		3857	async_cb (EV_P_ ev_async *w, int revents)
		3858	{
		3859	// just used for the side effects
		3860	}
		3861
		3862	The C<l_release> and C<l_acquire> callbacks simply unlock/lock the mutex
		3863	protecting the loop data, respectively.
		3864
		3865	static void
		3866	l_release (EV_P)
		3867	{
		3868	userdata *u = ev_userdata (EV_A);
		3869	pthread_mutex_unlock (&u->lock);
		3870	}
		3871
		3872	static void
		3873	l_acquire (EV_P)
		3874	{
		3875	userdata *u = ev_userdata (EV_A);
		3876	pthread_mutex_lock (&u->lock);
		3877	}
		3878
		3879	The event loop thread first acquires the mutex, and then jumps straight
		3880	into C<ev_run>:
		3881
		3882	void *
		3883	l_run (void *thr_arg)
		3884	{
		3885	struct ev_loop *loop = (struct ev_loop *)thr_arg;
		3886
		3887	l_acquire (EV_A);
		3888	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
		3889	ev_run (EV_A_ 0);
		3890	l_release (EV_A);
		3891
		3892	return 0;
		3893	}
		3894
		3895	Instead of invoking all pending watchers, the C<l_invoke> callback will
		3896	signal the main thread via some unspecified mechanism (signals? pipe
		3897	writes? C<Async::Interrupt>?) and then waits until all pending watchers
		3898	have been called (in a while loop because a) spurious wakeups are possible
		3899	and b) skipping inter-thread-communication when there are no pending
		3900	watchers is very beneficial):
		3901
		3902	static void
		3903	l_invoke (EV_P)
		3904	{
		3905	userdata *u = ev_userdata (EV_A);
		3906
		3907	while (ev_pending_count (EV_A))
		3908	{
		3909	wake_up_other_thread_in_some_magic_or_not_so_magic_way ();
		3910	pthread_cond_wait (&u->invoke_cv, &u->lock);
		3911	}
		3912	}
		3913
		3914	Now, whenever the main thread gets told to invoke pending watchers, it
		3915	will grab the lock, call C<ev_invoke_pending> and then signal the loop
		3916	thread to continue:
		3917
		3918	static void
		3919	real_invoke_pending (EV_P)
		3920	{
		3921	userdata *u = ev_userdata (EV_A);
		3922
		3923	pthread_mutex_lock (&u->lock);
		3924	ev_invoke_pending (EV_A);
		3925	pthread_cond_signal (&u->invoke_cv);
		3926	pthread_mutex_unlock (&u->lock);
		3927	}
		3928
		3929	Whenever you want to start/stop a watcher or do other modifications to an
		3930	event loop, you will now have to lock:
		3931
		3932	ev_timer timeout_watcher;
		3933	userdata *u = ev_userdata (EV_A);
		3934
		3935	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
		3936
		3937	pthread_mutex_lock (&u->lock);
		3938	ev_timer_start (EV_A_ &timeout_watcher);
		3939	ev_async_send (EV_A_ &u->async_w);
		3940	pthread_mutex_unlock (&u->lock);
		3941
		3942	Note that sending the C<ev_async> watcher is required because otherwise
		3943	an event loop currently blocking in the kernel will have no knowledge
		3944	about the newly added timer. By waking up the loop it will pick up any new
		3945	watchers in the next event loop iteration.
		3946
		3947	=head2 THREADS, COROUTINES, CONTINUATIONS, QUEUES... INSTEAD OF CALLBACKS
		3948
		3949	While the overhead of a callback that e.g. schedules a thread is small, it
		3950	is still an overhead. If you embed libev, and your main usage is with some
		3951	kind of threads or coroutines, you might want to customise libev so that
		3952	doesn't need callbacks anymore.
		3953
		3954	Imagine you have coroutines that you can switch to using a function
		3955	C<switch_to (coro)>, that libev runs in a coroutine called C<libev_coro>
		3956	and that due to some magic, the currently active coroutine is stored in a
		3957	global called C<current_coro>. Then you can build your own "wait for libev
		3958	event" primitive by changing C<EV_CB_DECLARE> and C<EV_CB_INVOKE> (note
		3959	the differing C<;> conventions):
		3960
		3961	#define EV_CB_DECLARE(type) struct my_coro *cb;
		3962	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)
		3963
		3964	That means instead of having a C callback function, you store the
		3965	coroutine to switch to in each watcher, and instead of having libev call
		3966	your callback, you instead have it switch to that coroutine.
		3967
		3968	A coroutine might now wait for an event with a function called
		3969	C<wait_for_event>. (the watcher needs to be started, as always, but it doesn't
		3970	matter when, or whether the watcher is active or not when this function is
		3971	called):
		3972
		3973	void
		3974	wait_for_event (ev_watcher *w)
		3975	{
		3976	ev_set_cb (w, current_coro);
		3977	switch_to (libev_coro);
		3978	}
		3979
		3980	That basically suspends the coroutine inside C<wait_for_event> and
		3981	continues the libev coroutine, which, when appropriate, switches back to
		3982	this or any other coroutine.
		3983
		3984	You can do similar tricks if you have, say, threads with an event queue -
		3985	instead of storing a coroutine, you store the queue object and instead of
		3986	switching to a coroutine, you push the watcher onto the queue and notify
		3987	any waiters.
		3988
		3989	To embed libev, see L</EMBEDDING>, but in short, it's easiest to create two
		3990	files, F<my_ev.h> and F<my_ev.c> that include the respective libev files:
		3991
		3992	// my_ev.h
		3993	#define EV_CB_DECLARE(type) struct my_coro *cb;
		3994	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)
		3995	#include "../libev/ev.h"
		3996
		3997	// my_ev.c
		3998	#define EV_H "my_ev.h"
		3999	#include "../libev/ev.c"
		4000
		4001	And then use F<my_ev.h> when you would normally use F<ev.h>, and compile
		4002	F<my_ev.c> into your project. When properly specifying include paths, you
		4003	can even use F<ev.h> as header file name directly.
1989		4004
1990		4005
1991	=head1 LIBEVENT EMULATION	4006	=head1 LIBEVENT EMULATION
1992		4007
1993	Libev offers a compatibility emulation layer for libevent. It cannot	4008	Libev offers a compatibility emulation layer for libevent. It cannot
1994	emulate the internals of libevent, so here are some usage hints:	4009	emulate the internals of libevent, so here are some usage hints:
1995		4010
1996	=over 4	4011	=over 4
		4012
		4013	=item * Only the libevent-1.4.1-beta API is being emulated.
		4014
		4015	This was the newest libevent version available when libev was implemented,
		4016	and is still mostly unchanged in 2010.
1997		4017
1998	=item * Use it by including <event.h>, as usual.	4018	=item * Use it by including <event.h>, as usual.
1999		4019
2000	=item * The following members are fully supported: ev_base, ev_callback,	4020	=item * The following members are fully supported: ev_base, ev_callback,
2001	ev_arg, ev_fd, ev_res, ev_events.	4021	ev_arg, ev_fd, ev_res, ev_events.
…		…
2006		4026
2007	=item * Priorities are not currently supported. Initialising priorities	4027	=item * Priorities are not currently supported. Initialising priorities
2008	will fail and all watchers will have the same priority, even though there	4028	will fail and all watchers will have the same priority, even though there
2009	is an ev_pri field.	4029	is an ev_pri field.
2010		4030
		4031	=item * In libevent, the last base created gets the signals, in libev, the
		4032	base that registered the signal gets the signals.
		4033
2011	=item * Other members are not supported.	4034	=item * Other members are not supported.
2012		4035
2013	=item * The libev emulation is I<not> ABI compatible to libevent, you need	4036	=item * The libev emulation is I<not> ABI compatible to libevent, you need
2014	to use the libev header file and library.	4037	to use the libev header file and library.
2015		4038
2016	=back	4039	=back
2017		4040
2018	=head1 C++ SUPPORT	4041	=head1 C++ SUPPORT
2019		4042
		4043	=head2 C API
		4044
		4045	The normal C API should work fine when used from C++: both ev.h and the
		4046	libev sources can be compiled as C++. Therefore, code that uses the C API
		4047	will work fine.
		4048
		4049	Proper exception specifications might have to be added to callbacks passed
		4050	to libev: exceptions may be thrown only from watcher callbacks, all other
		4051	callbacks (allocator, syserr, loop acquire/release and periodic reschedule
		4052	callbacks) must not throw exceptions, and might need a C<noexcept>
		4053	specification. If you have code that needs to be compiled as both C and
		4054	C++ you can use the C<EV_NOEXCEPT> macro for this:
		4055
		4056	static void
		4057	fatal_error (const char *msg) EV_NOEXCEPT
		4058	{
		4059	perror (msg);
		4060	abort ();
		4061	}
		4062
		4063	...
		4064	ev_set_syserr_cb (fatal_error);
		4065
		4066	The only API functions that can currently throw exceptions are C<ev_run>,
		4067	C<ev_invoke>, C<ev_invoke_pending> and C<ev_loop_destroy> (the latter
		4068	because it runs cleanup watchers).
		4069
		4070	Throwing exceptions in watcher callbacks is only supported if libev itself
		4071	is compiled with a C++ compiler or your C and C++ environments allow
		4072	throwing exceptions through C libraries (most do).
		4073
		4074	=head2 C++ API
		4075
2020	Libev comes with some simplistic wrapper classes for C++ that mainly allow	4076	Libev comes with some simplistic wrapper classes for C++ that mainly allow
2021	you to use some convinience methods to start/stop watchers and also change	4077	you to use some convenience methods to start/stop watchers and also change
2022	the callback model to a model using method callbacks on objects.	4078	the callback model to a model using method callbacks on objects.
2023		4079
2024	To use it,	4080	To use it,
2025		4081
2026	#include <ev++.h>	4082	#include <ev++.h>
2027		4083
2028	This automatically includes F<ev.h> and puts all of its definitions (many	4084	This automatically includes F<ev.h> and puts all of its definitions (many
2029	of them macros) into the global namespace. All C++ specific things are	4085	of them macros) into the global namespace. All C++ specific things are
2030	put into the C<ev> namespace. It should support all the same embedding	4086	put into the C<ev> namespace. It should support all the same embedding
2031	options as F<ev.h>, most notably C<EV_MULTIPLICITY>.	4087	options as F<ev.h>, most notably C<EV_MULTIPLICITY>.
…		…
2033	Care has been taken to keep the overhead low. The only data member the C++	4089	Care has been taken to keep the overhead low. The only data member the C++
2034	classes add (compared to plain C-style watchers) is the event loop pointer	4090	classes add (compared to plain C-style watchers) is the event loop pointer
2035	that the watcher is associated with (or no additional members at all if	4091	that the watcher is associated with (or no additional members at all if
2036	you disable C<EV_MULTIPLICITY> when embedding libev).	4092	you disable C<EV_MULTIPLICITY> when embedding libev).
2037		4093
2038	Currently, functions, and static and non-static member functions can be	4094	Currently, functions, static and non-static member functions and classes
2039	used as callbacks. Other types should be easy to add as long as they only	4095	with C<operator ()> can be used as callbacks. Other types should be easy
2040	need one additional pointer for context. If you need support for other	4096	to add as long as they only need one additional pointer for context. If
2041	types of functors please contact the author (preferably after implementing	4097	you need support for other types of functors please contact the author
2042	it).	4098	(preferably after implementing it).
		4099
		4100	For all this to work, your C++ compiler either has to use the same calling
		4101	conventions as your C compiler (for static member functions), or you have
		4102	to embed libev and compile libev itself as C++.
2043		4103
2044	Here is a list of things available in the C<ev> namespace:	4104	Here is a list of things available in the C<ev> namespace:
2045		4105
2046	=over 4	4106	=over 4
2047		4107
…		…
2057	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.	4117	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.
2058		4118
2059	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of	4119	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of
2060	the same name in the C<ev> namespace, with the exception of C<ev_signal>	4120	the same name in the C<ev> namespace, with the exception of C<ev_signal>
2061	which is called C<ev::sig> to avoid clashes with the C<signal> macro	4121	which is called C<ev::sig> to avoid clashes with the C<signal> macro
2062	defines by many implementations.	4122	defined by many implementations.
2063		4123
2064	All of those classes have these methods:	4124	All of those classes have these methods:
2065		4125
2066	=over 4	4126	=over 4
2067		4127
2068	=item ev::TYPE::TYPE ()	4128	=item ev::TYPE::TYPE ()
2069		4129
2070	=item ev::TYPE::TYPE (struct ev_loop *)	4130	=item ev::TYPE::TYPE (loop)
2071		4131
2072	=item ev::TYPE::~TYPE	4132	=item ev::TYPE::~TYPE
2073		4133
2074	The constructor (optionally) takes an event loop to associate the watcher	4134	The constructor (optionally) takes an event loop to associate the watcher
2075	with. If it is omitted, it will use C<EV_DEFAULT>.	4135	with. If it is omitted, it will use C<EV_DEFAULT>.
…		…
2098	your compiler is good :), then the method will be fully inlined into the	4158	your compiler is good :), then the method will be fully inlined into the
2099	thunking function, making it as fast as a direct C callback.	4159	thunking function, making it as fast as a direct C callback.
2100		4160
2101	Example: simple class declaration and watcher initialisation	4161	Example: simple class declaration and watcher initialisation
2102		4162
2103	struct myclass	4163	struct myclass
2104	{	4164	{
2105	void io_cb (ev::io &w, int revents) { }	4165	void io_cb (ev::io &w, int revents) { }
2106	}	4166	}
2107		4167
2108	myclass obj;	4168	myclass obj;
2109	ev::io iow;	4169	ev::io iow;
2110	iow.set <myclass, &myclass::io_cb> (&obj);	4170	iow.set <myclass, &myclass::io_cb> (&obj);
		4171
		4172	=item w->set (object *)
		4173
		4174	This is a variation of a method callback - leaving out the method to call
		4175	will default the method to C<operator ()>, which makes it possible to use
		4176	functor objects without having to manually specify the C<operator ()> all
		4177	the time. Incidentally, you can then also leave out the template argument
		4178	list.
		4179
		4180	The C<operator ()> method prototype must be C<void operator ()(watcher &w,
		4181	int revents)>.
		4182
		4183	See the method-C<set> above for more details.
		4184
		4185	Example: use a functor object as callback.
		4186
		4187	struct myfunctor
		4188	{
		4189	void operator() (ev::io &w, int revents)
		4190	{
		4191	...
		4192	}
		4193	}
		4194
		4195	myfunctor f;
		4196
		4197	ev::io w;
		4198	w.set (&f);
2111		4199
2112	=item w->set<function> (void *data = 0)	4200	=item w->set<function> (void *data = 0)
2113		4201
2114	Also sets a callback, but uses a static method or plain function as	4202	Also sets a callback, but uses a static method or plain function as
2115	callback. The optional C<data> argument will be stored in the watcher's	4203	callback. The optional C<data> argument will be stored in the watcher's
…		…
2117		4205
2118	The prototype of the C<function> must be C<void (*)(ev::TYPE &w, int)>.	4206	The prototype of the C<function> must be C<void (*)(ev::TYPE &w, int)>.
2119		4207
2120	See the method-C<set> above for more details.	4208	See the method-C<set> above for more details.
2121		4209
2122	Example:	4210	Example: Use a plain function as callback.
2123		4211
2124	static void io_cb (ev::io &w, int revents) { }	4212	static void io_cb (ev::io &w, int revents) { }
2125	iow.set <io_cb> ();	4213	iow.set <io_cb> ();
2126		4214
2127	=item w->set (struct ev_loop *)	4215	=item w->set (loop)
2128		4216
2129	Associates a different C<struct ev_loop> with this watcher. You can only	4217	Associates a different C<struct ev_loop> with this watcher. You can only
2130	do this when the watcher is inactive (and not pending either).	4218	do this when the watcher is inactive (and not pending either).
2131		4219
2132	=item w->set ([args])	4220	=item w->set ([arguments])
2133		4221
2134	Basically the same as C<ev_TYPE_set>, with the same args. Must be	4222	Basically the same as C<ev_TYPE_set> (except for C<ev::embed> watchers>),
		4223	with the same arguments. Either this method or a suitable start method
2135	called at least once. Unlike the C counterpart, an active watcher gets	4224	must be called at least once. Unlike the C counterpart, an active watcher
2136	automatically stopped and restarted when reconfiguring it with this	4225	gets automatically stopped and restarted when reconfiguring it with this
2137	method.	4226	method.
		4227
		4228	For C<ev::embed> watchers this method is called C<set_embed>, to avoid
		4229	clashing with the C<set (loop)> method.
2138		4230
2139	=item w->start ()	4231	=item w->start ()
2140		4232
2141	Starts the watcher. Note that there is no C<loop> argument, as the	4233	Starts the watcher. Note that there is no C<loop> argument, as the
2142	constructor already stores the event loop.	4234	constructor already stores the event loop.
2143		4235
		4236	=item w->start ([arguments])
		4237
		4238	Instead of calling C<set> and C<start> methods separately, it is often
		4239	convenient to wrap them in one call. Uses the same type of arguments as
		4240	the configure C<set> method of the watcher.
		4241
2144	=item w->stop ()	4242	=item w->stop ()
2145		4243
2146	Stops the watcher if it is active. Again, no C<loop> argument.	4244	Stops the watcher if it is active. Again, no C<loop> argument.
2147		4245
2148	=item w->again () (C<ev::timer>, C<ev::periodic> only)	4246	=item w->again () (C<ev::timer>, C<ev::periodic> only)
…		…
2160		4258
2161	=back	4259	=back
2162		4260
2163	=back	4261	=back
2164		4262
2165	Example: Define a class with an IO and idle watcher, start one of them in	4263	Example: Define a class with two I/O and idle watchers, start the I/O
2166	the constructor.	4264	watchers in the constructor.
2167		4265
2168	class myclass	4266	class myclass
2169	{	4267	{
2170	ev_io io; void io_cb (ev::io &w, int revents);	4268	ev::io io ; void io_cb (ev::io &w, int revents);
		4269	ev::io io2 ; void io2_cb (ev::io &w, int revents);
2171	ev_idle idle void idle_cb (ev::idle &w, int revents);	4270	ev::idle idle; void idle_cb (ev::idle &w, int revents);
2172		4271
2173	myclass ();	4272	myclass (int fd)
2174	}	4273	{
2175
2176	myclass::myclass (int fd)
2177	{
2178	io .set <myclass, &myclass::io_cb > (this);	4274	io .set <myclass, &myclass::io_cb > (this);
		4275	io2 .set <myclass, &myclass::io2_cb > (this);
2179	idle.set <myclass, &myclass::idle_cb> (this);	4276	idle.set <myclass, &myclass::idle_cb> (this);
2180		4277
2181	io.start (fd, ev::READ);	4278	io.set (fd, ev::WRITE); // configure the watcher
		4279	io.start (); // start it whenever convenient
		4280
		4281	io2.start (fd, ev::READ); // set + start in one call
		4282	}
2182	}	4283	};
		4284
		4285
		4286	=head1 OTHER LANGUAGE BINDINGS
		4287
		4288	Libev does not offer other language bindings itself, but bindings for a
		4289	number of languages exist in the form of third-party packages. If you know
		4290	any interesting language binding in addition to the ones listed here, drop
		4291	me a note.
		4292
		4293	=over 4
		4294
		4295	=item Perl
		4296
		4297	The EV module implements the full libev API and is actually used to test
		4298	libev. EV is developed together with libev. Apart from the EV core module,
		4299	there are additional modules that implement libev-compatible interfaces
		4300	to C<libadns> (C<EV::ADNS>, but C<AnyEvent::DNS> is preferred nowadays),
		4301	C<Net::SNMP> (C<Net::SNMP::EV>) and the C<libglib> event core (C<Glib::EV>
		4302	and C<EV::Glib>).
		4303
		4304	It can be found and installed via CPAN, its homepage is at
		4305	L<http://software.schmorp.de/pkg/EV>.
		4306
		4307	=item Python
		4308
		4309	Python bindings can be found at L<http://code.google.com/p/pyev/>. It
		4310	seems to be quite complete and well-documented.
		4311
		4312	=item Ruby
		4313
		4314	Tony Arcieri has written a ruby extension that offers access to a subset
		4315	of the libev API and adds file handle abstractions, asynchronous DNS and
		4316	more on top of it. It can be found via gem servers. Its homepage is at
		4317	L<http://rev.rubyforge.org/>.
		4318
		4319	Roger Pack reports that using the link order C<-lws2_32 -lmsvcrt-ruby-190>
		4320	makes rev work even on mingw.
		4321
		4322	=item Haskell
		4323
		4324	A haskell binding to libev is available at
		4325	L<http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hlibev>.
		4326
		4327	=item D
		4328
		4329	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
		4330	be found at L<http://www.llucax.com.ar/proj/ev.d/index.html>.
		4331
		4332	=item Ocaml
		4333
		4334	Erkki Seppala has written Ocaml bindings for libev, to be found at
		4335	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.
		4336
		4337	=item Lua
		4338
		4339	Brian Maher has written a partial interface to libev for lua (at the
		4340	time of this writing, only C<ev_io> and C<ev_timer>), to be found at
		4341	L<http://github.com/brimworks/lua-ev>.
		4342
		4343	=item Javascript
		4344
		4345	Node.js (L<http://nodejs.org>) uses libev as the underlying event library.
		4346
		4347	=item Others
		4348
		4349	There are others, and I stopped counting.
		4350
		4351	=back
2183		4352
2184		4353
2185	=head1 MACRO MAGIC	4354	=head1 MACRO MAGIC
2186		4355
2187	Libev can be compiled with a variety of options, the most fundamantal	4356	Libev can be compiled with a variety of options, the most fundamental
2188	of which is C<EV_MULTIPLICITY>. This option determines whether (most)	4357	of which is C<EV_MULTIPLICITY>. This option determines whether (most)
2189	functions and callbacks have an initial C<struct ev_loop *> argument.	4358	functions and callbacks have an initial C<struct ev_loop *> argument.
2190		4359
2191	To make it easier to write programs that cope with either variant, the	4360	To make it easier to write programs that cope with either variant, the
2192	following macros are defined:	4361	following macros are defined:
…		…
2197		4366
2198	This provides the loop I<argument> for functions, if one is required ("ev	4367	This provides the loop I<argument> for functions, if one is required ("ev
2199	loop argument"). The C<EV_A> form is used when this is the sole argument,	4368	loop argument"). The C<EV_A> form is used when this is the sole argument,
2200	C<EV_A_> is used when other arguments are following. Example:	4369	C<EV_A_> is used when other arguments are following. Example:
2201		4370
2202	ev_unref (EV_A);	4371	ev_unref (EV_A);
2203	ev_timer_add (EV_A_ watcher);	4372	ev_timer_add (EV_A_ watcher);
2204	ev_loop (EV_A_ 0);	4373	ev_run (EV_A_ 0);
2205		4374
2206	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,	4375	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
2207	which is often provided by the following macro.	4376	which is often provided by the following macro.
2208		4377
2209	=item C<EV_P>, C<EV_P_>	4378	=item C<EV_P>, C<EV_P_>
2210		4379
2211	This provides the loop I<parameter> for functions, if one is required ("ev	4380	This provides the loop I<parameter> for functions, if one is required ("ev
2212	loop parameter"). The C<EV_P> form is used when this is the sole parameter,	4381	loop parameter"). The C<EV_P> form is used when this is the sole parameter,
2213	C<EV_P_> is used when other parameters are following. Example:	4382	C<EV_P_> is used when other parameters are following. Example:
2214		4383
2215	// this is how ev_unref is being declared	4384	// this is how ev_unref is being declared
2216	static void ev_unref (EV_P);	4385	static void ev_unref (EV_P);
2217		4386
2218	// this is how you can declare your typical callback	4387	// this is how you can declare your typical callback
2219	static void cb (EV_P_ ev_timer *w, int revents)	4388	static void cb (EV_P_ ev_timer *w, int revents)
2220		4389
2221	It declares a parameter C<loop> of type C<struct ev_loop *>, quite	4390	It declares a parameter C<loop> of type C<struct ev_loop *>, quite
2222	suitable for use with C<EV_A>.	4391	suitable for use with C<EV_A>.
2223		4392
2224	=item C<EV_DEFAULT>, C<EV_DEFAULT_>	4393	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
2225		4394
2226	Similar to the other two macros, this gives you the value of the default	4395	Similar to the other two macros, this gives you the value of the default
2227	loop, if multiple loops are supported ("ev loop default").	4396	loop, if multiple loops are supported ("ev loop default"). The default loop
		4397	will be initialised if it isn't already initialised.
		4398
		4399	For non-multiplicity builds, these macros do nothing, so you always have
		4400	to initialise the loop somewhere.
		4401
		4402	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
		4403
		4404	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
		4405	default loop has been initialised (C<UC> == unchecked). Their behaviour
		4406	is undefined when the default loop has not been initialised by a previous
		4407	execution of C<EV_DEFAULT>, C<EV_DEFAULT_> or C<ev_default_init (...)>.
		4408
		4409	It is often prudent to use C<EV_DEFAULT> when initialising the first
		4410	watcher in a function but use C<EV_DEFAULT_UC> afterwards.
2228		4411
2229	=back	4412	=back
2230		4413
2231	Example: Declare and initialise a check watcher, utilising the above	4414	Example: Declare and initialise a check watcher, utilising the above
2232	macros so it will work regardless of whether multiple loops are supported	4415	macros so it will work regardless of whether multiple loops are supported
2233	or not.	4416	or not.
2234		4417
2235	static void	4418	static void
2236	check_cb (EV_P_ ev_timer *w, int revents)	4419	check_cb (EV_P_ ev_timer *w, int revents)
2237	{	4420	{
2238	ev_check_stop (EV_A_ w);	4421	ev_check_stop (EV_A_ w);
2239	}	4422	}
2240		4423
2241	ev_check check;	4424	ev_check check;
2242	ev_check_init (&check, check_cb);	4425	ev_check_init (&check, check_cb);
2243	ev_check_start (EV_DEFAULT_ &check);	4426	ev_check_start (EV_DEFAULT_ &check);
2244	ev_loop (EV_DEFAULT_ 0);	4427	ev_run (EV_DEFAULT_ 0);
2245		4428
2246	=head1 EMBEDDING	4429	=head1 EMBEDDING
2247		4430
2248	Libev can (and often is) directly embedded into host	4431	Libev can (and often is) directly embedded into host
2249	applications. Examples of applications that embed it include the Deliantra	4432	applications. Examples of applications that embed it include the Deliantra
…		…
2256	libev somewhere in your source tree).	4439	libev somewhere in your source tree).
2257		4440
2258	=head2 FILESETS	4441	=head2 FILESETS
2259		4442
2260	Depending on what features you need you need to include one or more sets of files	4443	Depending on what features you need you need to include one or more sets of files
2261	in your app.	4444	in your application.
2262		4445
2263	=head3 CORE EVENT LOOP	4446	=head3 CORE EVENT LOOP
2264		4447
2265	To include only the libev core (all the C<ev_*> functions), with manual	4448	To include only the libev core (all the C<ev_*> functions), with manual
2266	configuration (no autoconf):	4449	configuration (no autoconf):
2267		4450
2268	#define EV_STANDALONE 1	4451	#define EV_STANDALONE 1
2269	#include "ev.c"	4452	#include "ev.c"
2270		4453
2271	This will automatically include F<ev.h>, too, and should be done in a	4454	This will automatically include F<ev.h>, too, and should be done in a
2272	single C source file only to provide the function implementations. To use	4455	single C source file only to provide the function implementations. To use
2273	it, do the same for F<ev.h> in all files wishing to use this API (best	4456	it, do the same for F<ev.h> in all files wishing to use this API (best
2274	done by writing a wrapper around F<ev.h> that you can include instead and	4457	done by writing a wrapper around F<ev.h> that you can include instead and
2275	where you can put other configuration options):	4458	where you can put other configuration options):
2276		4459
2277	#define EV_STANDALONE 1	4460	#define EV_STANDALONE 1
2278	#include "ev.h"	4461	#include "ev.h"
2279		4462
2280	Both header files and implementation files can be compiled with a C++	4463	Both header files and implementation files can be compiled with a C++
2281	compiler (at least, thats a stated goal, and breakage will be treated	4464	compiler (at least, that's a stated goal, and breakage will be treated
2282	as a bug).	4465	as a bug).
2283		4466
2284	You need the following files in your source tree, or in a directory	4467	You need the following files in your source tree, or in a directory
2285	in your include path (e.g. in libev/ when using -Ilibev):	4468	in your include path (e.g. in libev/ when using -Ilibev):
2286		4469
2287	ev.h	4470	ev.h
2288	ev.c	4471	ev.c
2289	ev_vars.h	4472	ev_vars.h
2290	ev_wrap.h	4473	ev_wrap.h
2291		4474
2292	ev_win32.c required on win32 platforms only	4475	ev_win32.c required on win32 platforms only
2293		4476
2294	ev_select.c only when select backend is enabled (which is enabled by default)	4477	ev_select.c only when select backend is enabled
2295	ev_poll.c only when poll backend is enabled (disabled by default)	4478	ev_poll.c only when poll backend is enabled
2296	ev_epoll.c only when the epoll backend is enabled (disabled by default)	4479	ev_epoll.c only when the epoll backend is enabled
		4480	ev_linuxaio.c only when the linux aio backend is enabled
2297	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)	4481	ev_kqueue.c only when the kqueue backend is enabled
2298	ev_port.c only when the solaris port backend is enabled (disabled by default)	4482	ev_port.c only when the solaris port backend is enabled
2299		4483
2300	F<ev.c> includes the backend files directly when enabled, so you only need	4484	F<ev.c> includes the backend files directly when enabled, so you only need
2301	to compile this single file.	4485	to compile this single file.
2302		4486
2303	=head3 LIBEVENT COMPATIBILITY API	4487	=head3 LIBEVENT COMPATIBILITY API
2304		4488
2305	To include the libevent compatibility API, also include:	4489	To include the libevent compatibility API, also include:
2306		4490
2307	#include "event.c"	4491	#include "event.c"
2308		4492
2309	in the file including F<ev.c>, and:	4493	in the file including F<ev.c>, and:
2310		4494
2311	#include "event.h"	4495	#include "event.h"
2312		4496
2313	in the files that want to use the libevent API. This also includes F<ev.h>.	4497	in the files that want to use the libevent API. This also includes F<ev.h>.
2314		4498
2315	You need the following additional files for this:	4499	You need the following additional files for this:
2316		4500
2317	event.h	4501	event.h
2318	event.c	4502	event.c
2319		4503
2320	=head3 AUTOCONF SUPPORT	4504	=head3 AUTOCONF SUPPORT
2321		4505
2322	Instead of using C<EV_STANDALONE=1> and providing your config in	4506	Instead of using C<EV_STANDALONE=1> and providing your configuration in
2323	whatever way you want, you can also C<m4_include([libev.m4])> in your	4507	whatever way you want, you can also C<m4_include([libev.m4])> in your
2324	F<configure.ac> and leave C<EV_STANDALONE> undefined. F<ev.c> will then	4508	F<configure.ac> and leave C<EV_STANDALONE> undefined. F<ev.c> will then
2325	include F<config.h> and configure itself accordingly.	4509	include F<config.h> and configure itself accordingly.
2326		4510
2327	For this of course you need the m4 file:	4511	For this of course you need the m4 file:
2328		4512
2329	libev.m4	4513	libev.m4
2330		4514
2331	=head2 PREPROCESSOR SYMBOLS/MACROS	4515	=head2 PREPROCESSOR SYMBOLS/MACROS
2332		4516
2333	Libev can be configured via a variety of preprocessor symbols you have to define	4517	Libev can be configured via a variety of preprocessor symbols you have to
2334	before including any of its files. The default is not to build for multiplicity	4518	define before including (or compiling) any of its files. The default in
2335	and only include the select backend.	4519	the absence of autoconf is documented for every option.
		4520
		4521	Symbols marked with "(h)" do not change the ABI, and can have different
		4522	values when compiling libev vs. including F<ev.h>, so it is permissible
		4523	to redefine them before including F<ev.h> without breaking compatibility
		4524	to a compiled library. All other symbols change the ABI, which means all
		4525	users of libev and the libev code itself must be compiled with compatible
		4526	settings.
2336		4527
2337	=over 4	4528	=over 4
2338		4529
		4530	=item EV_COMPAT3 (h)
		4531
		4532	Backwards compatibility is a major concern for libev. This is why this
		4533	release of libev comes with wrappers for the functions and symbols that
		4534	have been renamed between libev version 3 and 4.
		4535
		4536	You can disable these wrappers (to test compatibility with future
		4537	versions) by defining C<EV_COMPAT3> to C<0> when compiling your
		4538	sources. This has the additional advantage that you can drop the C<struct>
		4539	from C<struct ev_loop> declarations, as libev will provide an C<ev_loop>
		4540	typedef in that case.
		4541
		4542	In some future version, the default for C<EV_COMPAT3> will become C<0>,
		4543	and in some even more future version the compatibility code will be
		4544	removed completely.
		4545
2339	=item EV_STANDALONE	4546	=item EV_STANDALONE (h)
2340		4547
2341	Must always be C<1> if you do not use autoconf configuration, which	4548	Must always be C<1> if you do not use autoconf configuration, which
2342	keeps libev from including F<config.h>, and it also defines dummy	4549	keeps libev from including F<config.h>, and it also defines dummy
2343	implementations for some libevent functions (such as logging, which is not	4550	implementations for some libevent functions (such as logging, which is not
2344	supported). It will also not define any of the structs usually found in	4551	supported). It will also not define any of the structs usually found in
2345	F<event.h> that are not directly supported by the libev core alone.	4552	F<event.h> that are not directly supported by the libev core alone.
2346		4553
		4554	In standalone mode, libev will still try to automatically deduce the
		4555	configuration, but has to be more conservative.
		4556
		4557	=item EV_USE_FLOOR
		4558
		4559	If defined to be C<1>, libev will use the C<floor ()> function for its
		4560	periodic reschedule calculations, otherwise libev will fall back on a
		4561	portable (slower) implementation. If you enable this, you usually have to
		4562	link against libm or something equivalent. Enabling this when the C<floor>
		4563	function is not available will fail, so the safe default is to not enable
		4564	this.
		4565
2347	=item EV_USE_MONOTONIC	4566	=item EV_USE_MONOTONIC
2348		4567
2349	If defined to be C<1>, libev will try to detect the availability of the	4568	If defined to be C<1>, libev will try to detect the availability of the
2350	monotonic clock option at both compiletime and runtime. Otherwise no use	4569	monotonic clock option at both compile time and runtime. Otherwise no
2351	of the monotonic clock option will be attempted. If you enable this, you	4570	use of the monotonic clock option will be attempted. If you enable this,
2352	usually have to link against librt or something similar. Enabling it when	4571	you usually have to link against librt or something similar. Enabling it
2353	the functionality isn't available is safe, though, although you have	4572	when the functionality isn't available is safe, though, although you have
2354	to make sure you link against any libraries where the C<clock_gettime>	4573	to make sure you link against any libraries where the C<clock_gettime>
2355	function is hiding in (often F<-lrt>).	4574	function is hiding in (often F<-lrt>). See also C<EV_USE_CLOCK_SYSCALL>.
2356		4575
2357	=item EV_USE_REALTIME	4576	=item EV_USE_REALTIME
2358		4577
2359	If defined to be C<1>, libev will try to detect the availability of the	4578	If defined to be C<1>, libev will try to detect the availability of the
2360	realtime clock option at compiletime (and assume its availability at	4579	real-time clock option at compile time (and assume its availability
2361	runtime if successful). Otherwise no use of the realtime clock option will	4580	at runtime if successful). Otherwise no use of the real-time clock
2362	be attempted. This effectively replaces C<gettimeofday> by C<clock_get	4581	option will be attempted. This effectively replaces C<gettimeofday>
2363	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See the	4582	by C<clock_get (CLOCK_REALTIME, ...)> and will not normally affect
2364	note about libraries in the description of C<EV_USE_MONOTONIC>, though.	4583	correctness. See the note about libraries in the description of
		4584	C<EV_USE_MONOTONIC>, though. Defaults to the opposite value of
		4585	C<EV_USE_CLOCK_SYSCALL>.
		4586
		4587	=item EV_USE_CLOCK_SYSCALL
		4588
		4589	If defined to be C<1>, libev will try to use a direct syscall instead
		4590	of calling the system-provided C<clock_gettime> function. This option
		4591	exists because on GNU/Linux, C<clock_gettime> is in C<librt>, but C<librt>
		4592	unconditionally pulls in C<libpthread>, slowing down single-threaded
		4593	programs needlessly. Using a direct syscall is slightly slower (in
		4594	theory), because no optimised vdso implementation can be used, but avoids
		4595	the pthread dependency. Defaults to C<1> on GNU/Linux with glibc 2.x or
		4596	higher, as it simplifies linking (no need for C<-lrt>).
2365		4597
2366	=item EV_USE_NANOSLEEP	4598	=item EV_USE_NANOSLEEP
2367		4599
2368	If defined to be C<1>, libev will assume that C<nanosleep ()> is available	4600	If defined to be C<1>, libev will assume that C<nanosleep ()> is available
2369	and will use it for delays. Otherwise it will use C<select ()>.	4601	and will use it for delays. Otherwise it will use C<select ()>.
2370		4602
		4603	=item EV_USE_EVENTFD
		4604
		4605	If defined to be C<1>, then libev will assume that C<eventfd ()> is
		4606	available and will probe for kernel support at runtime. This will improve
		4607	C<ev_signal> and C<ev_async> performance and reduce resource consumption.
		4608	If undefined, it will be enabled if the headers indicate GNU/Linux + Glibc
		4609	2.7 or newer, otherwise disabled.
		4610
2371	=item EV_USE_SELECT	4611	=item EV_USE_SELECT
2372		4612
2373	If undefined or defined to be C<1>, libev will compile in support for the	4613	If undefined or defined to be C<1>, libev will compile in support for the
2374	C<select>(2) backend. No attempt at autodetection will be done: if no	4614	C<select>(2) backend. No attempt at auto-detection will be done: if no
2375	other method takes over, select will be it. Otherwise the select backend	4615	other method takes over, select will be it. Otherwise the select backend
2376	will not be compiled in.	4616	will not be compiled in.
2377		4617
2378	=item EV_SELECT_USE_FD_SET	4618	=item EV_SELECT_USE_FD_SET
2379		4619
2380	If defined to C<1>, then the select backend will use the system C<fd_set>	4620	If defined to C<1>, then the select backend will use the system C<fd_set>
2381	structure. This is useful if libev doesn't compile due to a missing	4621	structure. This is useful if libev doesn't compile due to a missing
2382	C<NFDBITS> or C<fd_mask> definition or it misguesses the bitset layout on	4622	C<NFDBITS> or C<fd_mask> definition or it mis-guesses the bitset layout
2383	exotic systems. This usually limits the range of file descriptors to some	4623	on exotic systems. This usually limits the range of file descriptors to
2384	low limit such as 1024 or might have other limitations (winsocket only	4624	some low limit such as 1024 or might have other limitations (winsocket
2385	allows 64 sockets). The C<FD_SETSIZE> macro, set before compilation, might	4625	only allows 64 sockets). The C<FD_SETSIZE> macro, set before compilation,
2386	influence the size of the C<fd_set> used.	4626	configures the maximum size of the C<fd_set>.
2387		4627
2388	=item EV_SELECT_IS_WINSOCKET	4628	=item EV_SELECT_IS_WINSOCKET
2389		4629
2390	When defined to C<1>, the select backend will assume that	4630	When defined to C<1>, the select backend will assume that
2391	select/socket/connect etc. don't understand file descriptors but	4631	select/socket/connect etc. don't understand file descriptors but
…		…
2393	be used is the winsock select). This means that it will call	4633	be used is the winsock select). This means that it will call
2394	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	4634	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
2395	it is assumed that all these functions actually work on fds, even	4635	it is assumed that all these functions actually work on fds, even
2396	on win32. Should not be defined on non-win32 platforms.	4636	on win32. Should not be defined on non-win32 platforms.
2397		4637
		4638	=item EV_FD_TO_WIN32_HANDLE(fd)
		4639
		4640	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
		4641	file descriptors to socket handles. When not defining this symbol (the
		4642	default), then libev will call C<_get_osfhandle>, which is usually
		4643	correct. In some cases, programs use their own file descriptor management,
		4644	in which case they can provide this function to map fds to socket handles.
		4645
		4646	=item EV_WIN32_HANDLE_TO_FD(handle)
		4647
		4648	If C<EV_SELECT_IS_WINSOCKET> then libev maps handles to file descriptors
		4649	using the standard C<_open_osfhandle> function. For programs implementing
		4650	their own fd to handle mapping, overwriting this function makes it easier
		4651	to do so. This can be done by defining this macro to an appropriate value.
		4652
		4653	=item EV_WIN32_CLOSE_FD(fd)
		4654
		4655	If programs implement their own fd to handle mapping on win32, then this
		4656	macro can be used to override the C<close> function, useful to unregister
		4657	file descriptors again. Note that the replacement function has to close
		4658	the underlying OS handle.
		4659
		4660	=item EV_USE_WSASOCKET
		4661
		4662	If defined to be C<1>, libev will use C<WSASocket> to create its internal
		4663	communication socket, which works better in some environments. Otherwise,
		4664	the normal C<socket> function will be used, which works better in other
		4665	environments.
		4666
2398	=item EV_USE_POLL	4667	=item EV_USE_POLL
2399		4668
2400	If defined to be C<1>, libev will compile in support for the C<poll>(2)	4669	If defined to be C<1>, libev will compile in support for the C<poll>(2)
2401	backend. Otherwise it will be enabled on non-win32 platforms. It	4670	backend. Otherwise it will be enabled on non-win32 platforms. It
2402	takes precedence over select.	4671	takes precedence over select.
2403		4672
2404	=item EV_USE_EPOLL	4673	=item EV_USE_EPOLL
2405		4674
2406	If defined to be C<1>, libev will compile in support for the Linux	4675	If defined to be C<1>, libev will compile in support for the Linux
2407	C<epoll>(7) backend. Its availability will be detected at runtime,	4676	C<epoll>(7) backend. Its availability will be detected at runtime,
2408	otherwise another method will be used as fallback. This is the	4677	otherwise another method will be used as fallback. This is the preferred
2409	preferred backend for GNU/Linux systems.	4678	backend for GNU/Linux systems. If undefined, it will be enabled if the
		4679	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
		4680
		4681	=item EV_USE_LINUXAIO
		4682
		4683	If defined to be C<1>, libev will compile in support for the Linux
		4684	aio backend. Due to it's currenbt limitations it has to be requested
		4685	explicitly. If undefined, it will be enabled on linux, otherwise
		4686	disabled.
2410		4687
2411	=item EV_USE_KQUEUE	4688	=item EV_USE_KQUEUE
2412		4689
2413	If defined to be C<1>, libev will compile in support for the BSD style	4690	If defined to be C<1>, libev will compile in support for the BSD style
2414	C<kqueue>(2) backend. Its actual availability will be detected at runtime,	4691	C<kqueue>(2) backend. Its actual availability will be detected at runtime,
…		…
2427	otherwise another method will be used as fallback. This is the preferred	4704	otherwise another method will be used as fallback. This is the preferred
2428	backend for Solaris 10 systems.	4705	backend for Solaris 10 systems.
2429		4706
2430	=item EV_USE_DEVPOLL	4707	=item EV_USE_DEVPOLL
2431		4708
2432	reserved for future expansion, works like the USE symbols above.	4709	Reserved for future expansion, works like the USE symbols above.
2433		4710
2434	=item EV_USE_INOTIFY	4711	=item EV_USE_INOTIFY
2435		4712
2436	If defined to be C<1>, libev will compile in support for the Linux inotify	4713	If defined to be C<1>, libev will compile in support for the Linux inotify
2437	interface to speed up C<ev_stat> watchers. Its actual availability will	4714	interface to speed up C<ev_stat> watchers. Its actual availability will
2438	be detected at runtime.	4715	be detected at runtime. If undefined, it will be enabled if the headers
		4716	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
2439		4717
		4718	=item EV_NO_SMP
		4719
		4720	If defined to be C<1>, libev will assume that memory is always coherent
		4721	between threads, that is, threads can be used, but threads never run on
		4722	different cpus (or different cpu cores). This reduces dependencies
		4723	and makes libev faster.
		4724
		4725	=item EV_NO_THREADS
		4726
		4727	If defined to be C<1>, libev will assume that it will never be called from
		4728	different threads (that includes signal handlers), which is a stronger
		4729	assumption than C<EV_NO_SMP>, above. This reduces dependencies and makes
		4730	libev faster.
		4731
		4732	=item EV_ATOMIC_T
		4733
		4734	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
		4735	access is atomic with respect to other threads or signal contexts. No
		4736	such type is easily found in the C language, so you can provide your own
		4737	type that you know is safe for your purposes. It is used both for signal
		4738	handler "locking" as well as for signal and thread safety in C<ev_async>
		4739	watchers.
		4740
		4741	In the absence of this define, libev will use C<sig_atomic_t volatile>
		4742	(from F<signal.h>), which is usually good enough on most platforms.
		4743
2440	=item EV_H	4744	=item EV_H (h)
2441		4745
2442	The name of the F<ev.h> header file used to include it. The default if	4746	The name of the F<ev.h> header file used to include it. The default if
2443	undefined is C<< <ev.h> >> in F<event.h> and C<"ev.h"> in F<ev.c>. This	4747	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
2444	can be used to virtually rename the F<ev.h> header file in case of conflicts.	4748	used to virtually rename the F<ev.h> header file in case of conflicts.
2445		4749
2446	=item EV_CONFIG_H	4750	=item EV_CONFIG_H (h)
2447		4751
2448	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	4752	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
2449	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	4753	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
2450	C<EV_H>, above.	4754	C<EV_H>, above.
2451		4755
2452	=item EV_EVENT_H	4756	=item EV_EVENT_H (h)
2453		4757
2454	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	4758	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
2455	of how the F<event.h> header can be found.	4759	of how the F<event.h> header can be found, the default is C<"event.h">.
2456		4760
2457	=item EV_PROTOTYPES	4761	=item EV_PROTOTYPES (h)
2458		4762
2459	If defined to be C<0>, then F<ev.h> will not define any function	4763	If defined to be C<0>, then F<ev.h> will not define any function
2460	prototypes, but still define all the structs and other symbols. This is	4764	prototypes, but still define all the structs and other symbols. This is
2461	occasionally useful if you want to provide your own wrapper functions	4765	occasionally useful if you want to provide your own wrapper functions
2462	around libev functions.	4766	around libev functions.
…		…
2467	will have the C<struct ev_loop *> as first argument, and you can create	4771	will have the C<struct ev_loop *> as first argument, and you can create
2468	additional independent event loops. Otherwise there will be no support	4772	additional independent event loops. Otherwise there will be no support
2469	for multiple event loops and there is no first event loop pointer	4773	for multiple event loops and there is no first event loop pointer
2470	argument. Instead, all functions act on the single default loop.	4774	argument. Instead, all functions act on the single default loop.
2471		4775
		4776	Note that C<EV_DEFAULT> and C<EV_DEFAULT_> will no longer provide a
		4777	default loop when multiplicity is switched off - you always have to
		4778	initialise the loop manually in this case.
		4779
2472	=item EV_MINPRI	4780	=item EV_MINPRI
2473		4781
2474	=item EV_MAXPRI	4782	=item EV_MAXPRI
2475		4783
2476	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to	4784	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to
…		…
2481	When doing priority-based operations, libev usually has to linearly search	4789	When doing priority-based operations, libev usually has to linearly search
2482	all the priorities, so having many of them (hundreds) uses a lot of space	4790	all the priorities, so having many of them (hundreds) uses a lot of space
2483	and time, so using the defaults of five priorities (-2 .. +2) is usually	4791	and time, so using the defaults of five priorities (-2 .. +2) is usually
2484	fine.	4792	fine.
2485		4793
2486	If your embedding app does not need any priorities, defining these both to	4794	If your embedding application does not need any priorities, defining these
2487	C<0> will save some memory and cpu.	4795	both to C<0> will save some memory and CPU.
2488		4796
2489	=item EV_PERIODIC_ENABLE	4797	=item EV_PERIODIC_ENABLE, EV_IDLE_ENABLE, EV_EMBED_ENABLE, EV_STAT_ENABLE,
		4798	EV_PREPARE_ENABLE, EV_CHECK_ENABLE, EV_FORK_ENABLE, EV_SIGNAL_ENABLE,
		4799	EV_ASYNC_ENABLE, EV_CHILD_ENABLE.
2490		4800
2491	If undefined or defined to be C<1>, then periodic timers are supported. If	4801	If undefined or defined to be C<1> (and the platform supports it), then
2492	defined to be C<0>, then they are not. Disabling them saves a few kB of	4802	the respective watcher type is supported. If defined to be C<0>, then it
2493	code.	4803	is not. Disabling watcher types mainly saves code size.
2494		4804
2495	=item EV_IDLE_ENABLE	4805	=item EV_FEATURES
2496
2497	If undefined or defined to be C<1>, then idle watchers are supported. If
2498	defined to be C<0>, then they are not. Disabling them saves a few kB of
2499	code.
2500
2501	=item EV_EMBED_ENABLE
2502
2503	If undefined or defined to be C<1>, then embed watchers are supported. If
2504	defined to be C<0>, then they are not.
2505
2506	=item EV_STAT_ENABLE
2507
2508	If undefined or defined to be C<1>, then stat watchers are supported. If
2509	defined to be C<0>, then they are not.
2510
2511	=item EV_FORK_ENABLE
2512
2513	If undefined or defined to be C<1>, then fork watchers are supported. If
2514	defined to be C<0>, then they are not.
2515
2516	=item EV_MINIMAL
2517		4806
2518	If you need to shave off some kilobytes of code at the expense of some	4807	If you need to shave off some kilobytes of code at the expense of some
2519	speed, define this symbol to C<1>. Currently only used for gcc to override	4808	speed (but with the full API), you can define this symbol to request
2520	some inlining decisions, saves roughly 30% codesize of amd64.	4809	certain subsets of functionality. The default is to enable all features
		4810	that can be enabled on the platform.
		4811
		4812	A typical way to use this symbol is to define it to C<0> (or to a bitset
		4813	with some broad features you want) and then selectively re-enable
		4814	additional parts you want, for example if you want everything minimal,
		4815	but multiple event loop support, async and child watchers and the poll
		4816	backend, use this:
		4817
		4818	#define EV_FEATURES 0
		4819	#define EV_MULTIPLICITY 1
		4820	#define EV_USE_POLL 1
		4821	#define EV_CHILD_ENABLE 1
		4822	#define EV_ASYNC_ENABLE 1
		4823
		4824	The actual value is a bitset, it can be a combination of the following
		4825	values (by default, all of these are enabled):
		4826
		4827	=over 4
		4828
		4829	=item C<1> - faster/larger code
		4830
		4831	Use larger code to speed up some operations.
		4832
		4833	Currently this is used to override some inlining decisions (enlarging the
		4834	code size by roughly 30% on amd64).
		4835
		4836	When optimising for size, use of compiler flags such as C<-Os> with
		4837	gcc is recommended, as well as C<-DNDEBUG>, as libev contains a number of
		4838	assertions.
		4839
		4840	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4841	(e.g. gcc with C<-Os>).
		4842
		4843	=item C<2> - faster/larger data structures
		4844
		4845	Replaces the small 2-heap for timer management by a faster 4-heap, larger
		4846	hash table sizes and so on. This will usually further increase code size
		4847	and can additionally have an effect on the size of data structures at
		4848	runtime.
		4849
		4850	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4851	(e.g. gcc with C<-Os>).
		4852
		4853	=item C<4> - full API configuration
		4854
		4855	This enables priorities (sets C<EV_MAXPRI>=2 and C<EV_MINPRI>=-2), and
		4856	enables multiplicity (C<EV_MULTIPLICITY>=1).
		4857
		4858	=item C<8> - full API
		4859
		4860	This enables a lot of the "lesser used" API functions. See C<ev.h> for
		4861	details on which parts of the API are still available without this
		4862	feature, and do not complain if this subset changes over time.
		4863
		4864	=item C<16> - enable all optional watcher types
		4865
		4866	Enables all optional watcher types. If you want to selectively enable
		4867	only some watcher types other than I/O and timers (e.g. prepare,
		4868	embed, async, child...) you can enable them manually by defining
		4869	C<EV_watchertype_ENABLE> to C<1> instead.
		4870
		4871	=item C<32> - enable all backends
		4872
		4873	This enables all backends - without this feature, you need to enable at
		4874	least one backend manually (C<EV_USE_SELECT> is a good choice).
		4875
		4876	=item C<64> - enable OS-specific "helper" APIs
		4877
		4878	Enable inotify, eventfd, signalfd and similar OS-specific helper APIs by
		4879	default.
		4880
		4881	=back
		4882
		4883	Compiling with C<gcc -Os -DEV_STANDALONE -DEV_USE_EPOLL=1 -DEV_FEATURES=0>
		4884	reduces the compiled size of libev from 24.7Kb code/2.8Kb data to 6.5Kb
		4885	code/0.3Kb data on my GNU/Linux amd64 system, while still giving you I/O
		4886	watchers, timers and monotonic clock support.
		4887
		4888	With an intelligent-enough linker (gcc+binutils are intelligent enough
		4889	when you use C<-Wl,--gc-sections -ffunction-sections>) functions unused by
		4890	your program might be left out as well - a binary starting a timer and an
		4891	I/O watcher then might come out at only 5Kb.
		4892
		4893	=item EV_API_STATIC
		4894
		4895	If this symbol is defined (by default it is not), then all identifiers
		4896	will have static linkage. This means that libev will not export any
		4897	identifiers, and you cannot link against libev anymore. This can be useful
		4898	when you embed libev, only want to use libev functions in a single file,
		4899	and do not want its identifiers to be visible.
		4900
		4901	To use this, define C<EV_API_STATIC> and include F<ev.c> in the file that
		4902	wants to use libev.
		4903
		4904	This option only works when libev is compiled with a C compiler, as C++
		4905	doesn't support the required declaration syntax.
		4906
		4907	=item EV_AVOID_STDIO
		4908
		4909	If this is set to C<1> at compiletime, then libev will avoid using stdio
		4910	functions (printf, scanf, perror etc.). This will increase the code size
		4911	somewhat, but if your program doesn't otherwise depend on stdio and your
		4912	libc allows it, this avoids linking in the stdio library which is quite
		4913	big.
		4914
		4915	Note that error messages might become less precise when this option is
		4916	enabled.
		4917
		4918	=item EV_NSIG
		4919
		4920	The highest supported signal number, +1 (or, the number of
		4921	signals): Normally, libev tries to deduce the maximum number of signals
		4922	automatically, but sometimes this fails, in which case it can be
		4923	specified. Also, using a lower number than detected (C<32> should be
		4924	good for about any system in existence) can save some memory, as libev
		4925	statically allocates some 12-24 bytes per signal number.
2521		4926
2522	=item EV_PID_HASHSIZE	4927	=item EV_PID_HASHSIZE
2523		4928
2524	C<ev_child> watchers use a small hash table to distribute workload by	4929	C<ev_child> watchers use a small hash table to distribute workload by
2525	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	4930	pid. The default size is C<16> (or C<1> with C<EV_FEATURES> disabled),
2526	than enough. If you need to manage thousands of children you might want to	4931	usually more than enough. If you need to manage thousands of children you
2527	increase this value (I<must> be a power of two).	4932	might want to increase this value (I<must> be a power of two).
2528		4933
2529	=item EV_INOTIFY_HASHSIZE	4934	=item EV_INOTIFY_HASHSIZE
2530		4935
2531	C<ev_stat> watchers use a small hash table to distribute workload by	4936	C<ev_stat> watchers use a small hash table to distribute workload by
2532	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	4937	inotify watch id. The default size is C<16> (or C<1> with C<EV_FEATURES>
2533	usually more than enough. If you need to manage thousands of C<ev_stat>	4938	disabled), usually more than enough. If you need to manage thousands of
2534	watchers you might want to increase this value (I<must> be a power of	4939	C<ev_stat> watchers you might want to increase this value (I<must> be a
2535	two).	4940	power of two).
		4941
		4942	=item EV_USE_4HEAP
		4943
		4944	Heaps are not very cache-efficient. To improve the cache-efficiency of the
		4945	timer and periodics heaps, libev uses a 4-heap when this symbol is defined
		4946	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably
		4947	faster performance with many (thousands) of watchers.
		4948
		4949	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
		4950	will be C<0>.
		4951
		4952	=item EV_HEAP_CACHE_AT
		4953
		4954	Heaps are not very cache-efficient. To improve the cache-efficiency of the
		4955	timer and periodics heaps, libev can cache the timestamp (I<at>) within
		4956	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
		4957	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
		4958	but avoids random read accesses on heap changes. This improves performance
		4959	noticeably with many (hundreds) of watchers.
		4960
		4961	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
		4962	will be C<0>.
		4963
		4964	=item EV_VERIFY
		4965
		4966	Controls how much internal verification (see C<ev_verify ()>) will
		4967	be done: If set to C<0>, no internal verification code will be compiled
		4968	in. If set to C<1>, then verification code will be compiled in, but not
		4969	called. If set to C<2>, then the internal verification code will be
		4970	called once per loop, which can slow down libev. If set to C<3>, then the
		4971	verification code will be called very frequently, which will slow down
		4972	libev considerably.
		4973
		4974	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
		4975	will be C<0>.
2536		4976
2537	=item EV_COMMON	4977	=item EV_COMMON
2538		4978
2539	By default, all watchers have a C<void *data> member. By redefining	4979	By default, all watchers have a C<void *data> member. By redefining
2540	this macro to a something else you can include more and other types of	4980	this macro to something else you can include more and other types of
2541	members. You have to define it each time you include one of the files,	4981	members. You have to define it each time you include one of the files,
2542	though, and it must be identical each time.	4982	though, and it must be identical each time.
2543		4983
2544	For example, the perl EV module uses something like this:	4984	For example, the perl EV module uses something like this:
2545		4985
2546	#define EV_COMMON \	4986	#define EV_COMMON \
2547	SV *self; /* contains this struct */ \	4987	SV *self; /* contains this struct */ \
2548	SV *cb_sv, *fh /* note no trailing ";" */	4988	SV *cb_sv, *fh /* note no trailing ";" */
2549		4989
2550	=item EV_CB_DECLARE (type)	4990	=item EV_CB_DECLARE (type)
2551		4991
2552	=item EV_CB_INVOKE (watcher, revents)	4992	=item EV_CB_INVOKE (watcher, revents)
2553		4993
…		…
2558	definition and a statement, respectively. See the F<ev.h> header file for	4998	definition and a statement, respectively. See the F<ev.h> header file for
2559	their default definitions. One possible use for overriding these is to	4999	their default definitions. One possible use for overriding these is to
2560	avoid the C<struct ev_loop *> as first argument in all cases, or to use	5000	avoid the C<struct ev_loop *> as first argument in all cases, or to use
2561	method calls instead of plain function calls in C++.	5001	method calls instead of plain function calls in C++.
2562		5002
		5003	=back
		5004
2563	=head2 EXPORTED API SYMBOLS	5005	=head2 EXPORTED API SYMBOLS
2564		5006
2565	If you need to re-export the API (e.g. via a dll) and you need a list of	5007	If you need to re-export the API (e.g. via a DLL) and you need a list of
2566	exported symbols, you can use the provided F<Symbol.*> files which list	5008	exported symbols, you can use the provided F<Symbol.*> files which list
2567	all public symbols, one per line:	5009	all public symbols, one per line:
2568		5010
2569	Symbols.ev for libev proper	5011	Symbols.ev for libev proper
2570	Symbols.event for the libevent emulation	5012	Symbols.event for the libevent emulation
2571		5013
2572	This can also be used to rename all public symbols to avoid clashes with	5014	This can also be used to rename all public symbols to avoid clashes with
2573	multiple versions of libev linked together (which is obviously bad in	5015	multiple versions of libev linked together (which is obviously bad in
2574	itself, but sometimes it is inconvinient to avoid this).	5016	itself, but sometimes it is inconvenient to avoid this).
2575		5017
2576	A sed command like this will create wrapper C<#define>'s that you need to	5018	A sed command like this will create wrapper C<#define>'s that you need to
2577	include before including F<ev.h>:	5019	include before including F<ev.h>:
2578		5020
2579	<Symbols.ev sed -e "s/.*/#define & myprefix_&/" >wrap.h	5021	<Symbols.ev sed -e "s/.*/#define & myprefix_&/" >wrap.h
…		…
2596	file.	5038	file.
2597		5039
2598	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	5040	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
2599	that everybody includes and which overrides some configure choices:	5041	that everybody includes and which overrides some configure choices:
2600		5042
2601	#define EV_MINIMAL 1	5043	#define EV_FEATURES 8
2602	#define EV_USE_POLL 0	5044	#define EV_USE_SELECT 1
2603	#define EV_MULTIPLICITY 0
2604	#define EV_PERIODIC_ENABLE 0	5045	#define EV_PREPARE_ENABLE 1
		5046	#define EV_IDLE_ENABLE 1
2605	#define EV_STAT_ENABLE 0	5047	#define EV_SIGNAL_ENABLE 1
2606	#define EV_FORK_ENABLE 0	5048	#define EV_CHILD_ENABLE 1
		5049	#define EV_USE_STDEXCEPT 0
2607	#define EV_CONFIG_H <config.h>	5050	#define EV_CONFIG_H <config.h>
2608	#define EV_MINPRI 0
2609	#define EV_MAXPRI 0
2610		5051
2611	#include "ev++.h"	5052	#include "ev++.h"
2612		5053
2613	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	5054	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
2614		5055
2615	#include "ev_cpp.h"	5056	#include "ev_cpp.h"
2616	#include "ev.c"	5057	#include "ev.c"
2617		5058
		5059	=head1 INTERACTION WITH OTHER PROGRAMS, LIBRARIES OR THE ENVIRONMENT
2618		5060
		5061	=head2 THREADS AND COROUTINES
		5062
		5063	=head3 THREADS
		5064
		5065	All libev functions are reentrant and thread-safe unless explicitly
		5066	documented otherwise, but libev implements no locking itself. This means
		5067	that you can use as many loops as you want in parallel, as long as there
		5068	are no concurrent calls into any libev function with the same loop
		5069	parameter (C<ev_default_*> calls have an implicit default loop parameter,
		5070	of course): libev guarantees that different event loops share no data
		5071	structures that need any locking.
		5072
		5073	Or to put it differently: calls with different loop parameters can be done
		5074	concurrently from multiple threads, calls with the same loop parameter
		5075	must be done serially (but can be done from different threads, as long as
		5076	only one thread ever is inside a call at any point in time, e.g. by using
		5077	a mutex per loop).
		5078
		5079	Specifically to support threads (and signal handlers), libev implements
		5080	so-called C<ev_async> watchers, which allow some limited form of
		5081	concurrency on the same event loop, namely waking it up "from the
		5082	outside".
		5083
		5084	If you want to know which design (one loop, locking, or multiple loops
		5085	without or something else still) is best for your problem, then I cannot
		5086	help you, but here is some generic advice:
		5087
		5088	=over 4
		5089
		5090	=item * most applications have a main thread: use the default libev loop
		5091	in that thread, or create a separate thread running only the default loop.
		5092
		5093	This helps integrating other libraries or software modules that use libev
		5094	themselves and don't care/know about threading.
		5095
		5096	=item * one loop per thread is usually a good model.
		5097
		5098	Doing this is almost never wrong, sometimes a better-performance model
		5099	exists, but it is always a good start.
		5100
		5101	=item * other models exist, such as the leader/follower pattern, where one
		5102	loop is handed through multiple threads in a kind of round-robin fashion.
		5103
		5104	Choosing a model is hard - look around, learn, know that usually you can do
		5105	better than you currently do :-)
		5106
		5107	=item * often you need to talk to some other thread which blocks in the
		5108	event loop.
		5109
		5110	C<ev_async> watchers can be used to wake them up from other threads safely
		5111	(or from signal contexts...).
		5112
		5113	An example use would be to communicate signals or other events that only
		5114	work in the default loop by registering the signal watcher with the
		5115	default loop and triggering an C<ev_async> watcher from the default loop
		5116	watcher callback into the event loop interested in the signal.
		5117
		5118	=back
		5119
		5120	See also L</THREAD LOCKING EXAMPLE>.
		5121
		5122	=head3 COROUTINES
		5123
		5124	Libev is very accommodating to coroutines ("cooperative threads"):
		5125	libev fully supports nesting calls to its functions from different
		5126	coroutines (e.g. you can call C<ev_run> on the same loop from two
		5127	different coroutines, and switch freely between both coroutines running
		5128	the loop, as long as you don't confuse yourself). The only exception is
		5129	that you must not do this from C<ev_periodic> reschedule callbacks.
		5130
		5131	Care has been taken to ensure that libev does not keep local state inside
		5132	C<ev_run>, and other calls do not usually allow for coroutine switches as
		5133	they do not call any callbacks.
		5134
		5135	=head2 COMPILER WARNINGS
		5136
		5137	Depending on your compiler and compiler settings, you might get no or a
		5138	lot of warnings when compiling libev code. Some people are apparently
		5139	scared by this.
		5140
		5141	However, these are unavoidable for many reasons. For one, each compiler
		5142	has different warnings, and each user has different tastes regarding
		5143	warning options. "Warn-free" code therefore cannot be a goal except when
		5144	targeting a specific compiler and compiler-version.
		5145
		5146	Another reason is that some compiler warnings require elaborate
		5147	workarounds, or other changes to the code that make it less clear and less
		5148	maintainable.
		5149
		5150	And of course, some compiler warnings are just plain stupid, or simply
		5151	wrong (because they don't actually warn about the condition their message
		5152	seems to warn about). For example, certain older gcc versions had some
		5153	warnings that resulted in an extreme number of false positives. These have
		5154	been fixed, but some people still insist on making code warn-free with
		5155	such buggy versions.
		5156
		5157	While libev is written to generate as few warnings as possible,
		5158	"warn-free" code is not a goal, and it is recommended not to build libev
		5159	with any compiler warnings enabled unless you are prepared to cope with
		5160	them (e.g. by ignoring them). Remember that warnings are just that:
		5161	warnings, not errors, or proof of bugs.
		5162
		5163
		5164	=head2 VALGRIND
		5165
		5166	Valgrind has a special section here because it is a popular tool that is
		5167	highly useful. Unfortunately, valgrind reports are very hard to interpret.
		5168
		5169	If you think you found a bug (memory leak, uninitialised data access etc.)
		5170	in libev, then check twice: If valgrind reports something like:
		5171
		5172	==2274== definitely lost: 0 bytes in 0 blocks.
		5173	==2274== possibly lost: 0 bytes in 0 blocks.
		5174	==2274== still reachable: 256 bytes in 1 blocks.
		5175
		5176	Then there is no memory leak, just as memory accounted to global variables
		5177	is not a memleak - the memory is still being referenced, and didn't leak.
		5178
		5179	Similarly, under some circumstances, valgrind might report kernel bugs
		5180	as if it were a bug in libev (e.g. in realloc or in the poll backend,
		5181	although an acceptable workaround has been found here), or it might be
		5182	confused.
		5183
		5184	Keep in mind that valgrind is a very good tool, but only a tool. Don't
		5185	make it into some kind of religion.
		5186
		5187	If you are unsure about something, feel free to contact the mailing list
		5188	with the full valgrind report and an explanation on why you think this
		5189	is a bug in libev (best check the archives, too :). However, don't be
		5190	annoyed when you get a brisk "this is no bug" answer and take the chance
		5191	of learning how to interpret valgrind properly.
		5192
		5193	If you need, for some reason, empty reports from valgrind for your project
		5194	I suggest using suppression lists.
		5195
		5196
		5197	=head1 PORTABILITY NOTES
		5198
		5199	=head2 GNU/LINUX 32 BIT LIMITATIONS
		5200
		5201	GNU/Linux is the only common platform that supports 64 bit file/large file
		5202	interfaces but I<disables> them by default.
		5203
		5204	That means that libev compiled in the default environment doesn't support
		5205	files larger than 2GiB or so, which mainly affects C<ev_stat> watchers.
		5206
		5207	Unfortunately, many programs try to work around this GNU/Linux issue
		5208	by enabling the large file API, which makes them incompatible with the
		5209	standard libev compiled for their system.
		5210
		5211	Likewise, libev cannot enable the large file API itself as this would
		5212	suddenly make it incompatible to the default compile time environment,
		5213	i.e. all programs not using special compile switches.
		5214
		5215	=head2 OS/X AND DARWIN BUGS
		5216
		5217	The whole thing is a bug if you ask me - basically any system interface
		5218	you touch is broken, whether it is locales, poll, kqueue or even the
		5219	OpenGL drivers.
		5220
		5221	=head3 C<kqueue> is buggy
		5222
		5223	The kqueue syscall is broken in all known versions - most versions support
		5224	only sockets, many support pipes.
		5225
		5226	Libev tries to work around this by not using C<kqueue> by default on this
		5227	rotten platform, but of course you can still ask for it when creating a
		5228	loop - embedding a socket-only kqueue loop into a select-based one is
		5229	probably going to work well.
		5230
		5231	=head3 C<poll> is buggy
		5232
		5233	Instead of fixing C<kqueue>, Apple replaced their (working) C<poll>
		5234	implementation by something calling C<kqueue> internally around the 10.5.6
		5235	release, so now C<kqueue> I<and> C<poll> are broken.
		5236
		5237	Libev tries to work around this by not using C<poll> by default on
		5238	this rotten platform, but of course you can still ask for it when creating
		5239	a loop.
		5240
		5241	=head3 C<select> is buggy
		5242
		5243	All that's left is C<select>, and of course Apple found a way to fuck this
		5244	one up as well: On OS/X, C<select> actively limits the number of file
		5245	descriptors you can pass in to 1024 - your program suddenly crashes when
		5246	you use more.
		5247
		5248	There is an undocumented "workaround" for this - defining
		5249	C<_DARWIN_UNLIMITED_SELECT>, which libev tries to use, so select I<should>
		5250	work on OS/X.
		5251
		5252	=head2 SOLARIS PROBLEMS AND WORKAROUNDS
		5253
		5254	=head3 C<errno> reentrancy
		5255
		5256	The default compile environment on Solaris is unfortunately so
		5257	thread-unsafe that you can't even use components/libraries compiled
		5258	without C<-D_REENTRANT> in a threaded program, which, of course, isn't
		5259	defined by default. A valid, if stupid, implementation choice.
		5260
		5261	If you want to use libev in threaded environments you have to make sure
		5262	it's compiled with C<_REENTRANT> defined.
		5263
		5264	=head3 Event port backend
		5265
		5266	The scalable event interface for Solaris is called "event
		5267	ports". Unfortunately, this mechanism is very buggy in all major
		5268	releases. If you run into high CPU usage, your program freezes or you get
		5269	a large number of spurious wakeups, make sure you have all the relevant
		5270	and latest kernel patches applied. No, I don't know which ones, but there
		5271	are multiple ones to apply, and afterwards, event ports actually work
		5272	great.
		5273
		5274	If you can't get it to work, you can try running the program by setting
		5275	the environment variable C<LIBEV_FLAGS=3> to only allow C<poll> and
		5276	C<select> backends.
		5277
		5278	=head2 AIX POLL BUG
		5279
		5280	AIX unfortunately has a broken C<poll.h> header. Libev works around
		5281	this by trying to avoid the poll backend altogether (i.e. it's not even
		5282	compiled in), which normally isn't a big problem as C<select> works fine
		5283	with large bitsets on AIX, and AIX is dead anyway.
		5284
		5285	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
		5286
		5287	=head3 General issues
		5288
		5289	Win32 doesn't support any of the standards (e.g. POSIX) that libev
		5290	requires, and its I/O model is fundamentally incompatible with the POSIX
		5291	model. Libev still offers limited functionality on this platform in
		5292	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
		5293	descriptors. This only applies when using Win32 natively, not when using
		5294	e.g. cygwin. Actually, it only applies to the microsofts own compilers,
		5295	as every compiler comes with a slightly differently broken/incompatible
		5296	environment.
		5297
		5298	Lifting these limitations would basically require the full
		5299	re-implementation of the I/O system. If you are into this kind of thing,
		5300	then note that glib does exactly that for you in a very portable way (note
		5301	also that glib is the slowest event library known to man).
		5302
		5303	There is no supported compilation method available on windows except
		5304	embedding it into other applications.
		5305
		5306	Sensible signal handling is officially unsupported by Microsoft - libev
		5307	tries its best, but under most conditions, signals will simply not work.
		5308
		5309	Not a libev limitation but worth mentioning: windows apparently doesn't
		5310	accept large writes: instead of resulting in a partial write, windows will
		5311	either accept everything or return C<ENOBUFS> if the buffer is too large,
		5312	so make sure you only write small amounts into your sockets (less than a
		5313	megabyte seems safe, but this apparently depends on the amount of memory
		5314	available).
		5315
		5316	Due to the many, low, and arbitrary limits on the win32 platform and
		5317	the abysmal performance of winsockets, using a large number of sockets
		5318	is not recommended (and not reasonable). If your program needs to use
		5319	more than a hundred or so sockets, then likely it needs to use a totally
		5320	different implementation for windows, as libev offers the POSIX readiness
		5321	notification model, which cannot be implemented efficiently on windows
		5322	(due to Microsoft monopoly games).
		5323
		5324	A typical way to use libev under windows is to embed it (see the embedding
		5325	section for details) and use the following F<evwrap.h> header file instead
		5326	of F<ev.h>:
		5327
		5328	#define EV_STANDALONE /* keeps ev from requiring config.h */
		5329	#define EV_SELECT_IS_WINSOCKET 1 /* configure libev for windows select */
		5330
		5331	#include "ev.h"
		5332
		5333	And compile the following F<evwrap.c> file into your project (make sure
		5334	you do I<not> compile the F<ev.c> or any other embedded source files!):
		5335
		5336	#include "evwrap.h"
		5337	#include "ev.c"
		5338
		5339	=head3 The winsocket C<select> function
		5340
		5341	The winsocket C<select> function doesn't follow POSIX in that it
		5342	requires socket I<handles> and not socket I<file descriptors> (it is
		5343	also extremely buggy). This makes select very inefficient, and also
		5344	requires a mapping from file descriptors to socket handles (the Microsoft
		5345	C runtime provides the function C<_open_osfhandle> for this). See the
		5346	discussion of the C<EV_SELECT_USE_FD_SET>, C<EV_SELECT_IS_WINSOCKET> and
		5347	C<EV_FD_TO_WIN32_HANDLE> preprocessor symbols for more info.
		5348
		5349	The configuration for a "naked" win32 using the Microsoft runtime
		5350	libraries and raw winsocket select is:
		5351
		5352	#define EV_USE_SELECT 1
		5353	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
		5354
		5355	Note that winsockets handling of fd sets is O(n), so you can easily get a
		5356	complexity in the O(n²) range when using win32.
		5357
		5358	=head3 Limited number of file descriptors
		5359
		5360	Windows has numerous arbitrary (and low) limits on things.
		5361
		5362	Early versions of winsocket's select only supported waiting for a maximum
		5363	of C<64> handles (probably owning to the fact that all windows kernels
		5364	can only wait for C<64> things at the same time internally; Microsoft
		5365	recommends spawning a chain of threads and wait for 63 handles and the
		5366	previous thread in each. Sounds great!).
		5367
		5368	Newer versions support more handles, but you need to define C<FD_SETSIZE>
		5369	to some high number (e.g. C<2048>) before compiling the winsocket select
		5370	call (which might be in libev or elsewhere, for example, perl and many
		5371	other interpreters do their own select emulation on windows).
		5372
		5373	Another limit is the number of file descriptors in the Microsoft runtime
		5374	libraries, which by default is C<64> (there must be a hidden I<64>
		5375	fetish or something like this inside Microsoft). You can increase this
		5376	by calling C<_setmaxstdio>, which can increase this limit to C<2048>
		5377	(another arbitrary limit), but is broken in many versions of the Microsoft
		5378	runtime libraries. This might get you to about C<512> or C<2048> sockets
		5379	(depending on windows version and/or the phase of the moon). To get more,
		5380	you need to wrap all I/O functions and provide your own fd management, but
		5381	the cost of calling select (O(n²)) will likely make this unworkable.
		5382
		5383	=head2 PORTABILITY REQUIREMENTS
		5384
		5385	In addition to a working ISO-C implementation and of course the
		5386	backend-specific APIs, libev relies on a few additional extensions:
		5387
		5388	=over 4
		5389
		5390	=item C<void (*)(ev_watcher_type *, int revents)> must have compatible
		5391	calling conventions regardless of C<ev_watcher_type *>.
		5392
		5393	Libev assumes not only that all watcher pointers have the same internal
		5394	structure (guaranteed by POSIX but not by ISO C for example), but it also
		5395	assumes that the same (machine) code can be used to call any watcher
		5396	callback: The watcher callbacks have different type signatures, but libev
		5397	calls them using an C<ev_watcher *> internally.
		5398
		5399	=item null pointers and integer zero are represented by 0 bytes
		5400
		5401	Libev uses C<memset> to initialise structs and arrays to C<0> bytes, and
		5402	relies on this setting pointers and integers to null.
		5403
		5404	=item pointer accesses must be thread-atomic
		5405
		5406	Accessing a pointer value must be atomic, it must both be readable and
		5407	writable in one piece - this is the case on all current architectures.
		5408
		5409	=item C<sig_atomic_t volatile> must be thread-atomic as well
		5410
		5411	The type C<sig_atomic_t volatile> (or whatever is defined as
		5412	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different
		5413	threads. This is not part of the specification for C<sig_atomic_t>, but is
		5414	believed to be sufficiently portable.
		5415
		5416	=item C<sigprocmask> must work in a threaded environment
		5417
		5418	Libev uses C<sigprocmask> to temporarily block signals. This is not
		5419	allowed in a threaded program (C<pthread_sigmask> has to be used). Typical
		5420	pthread implementations will either allow C<sigprocmask> in the "main
		5421	thread" or will block signals process-wide, both behaviours would
		5422	be compatible with libev. Interaction between C<sigprocmask> and
		5423	C<pthread_sigmask> could complicate things, however.
		5424
		5425	The most portable way to handle signals is to block signals in all threads
		5426	except the initial one, and run the signal handling loop in the initial
		5427	thread as well.
		5428
		5429	=item C<long> must be large enough for common memory allocation sizes
		5430
		5431	To improve portability and simplify its API, libev uses C<long> internally
		5432	instead of C<size_t> when allocating its data structures. On non-POSIX
		5433	systems (Microsoft...) this might be unexpectedly low, but is still at
		5434	least 31 bits everywhere, which is enough for hundreds of millions of
		5435	watchers.
		5436
		5437	=item C<double> must hold a time value in seconds with enough accuracy
		5438
		5439	The type C<double> is used to represent timestamps. It is required to
		5440	have at least 51 bits of mantissa (and 9 bits of exponent), which is
		5441	good enough for at least into the year 4000 with millisecond accuracy
		5442	(the design goal for libev). This requirement is overfulfilled by
		5443	implementations using IEEE 754, which is basically all existing ones.
		5444
		5445	With IEEE 754 doubles, you get microsecond accuracy until at least the
		5446	year 2255 (and millisecond accuracy till the year 287396 - by then, libev
		5447	is either obsolete or somebody patched it to use C<long double> or
		5448	something like that, just kidding).
		5449
		5450	=back
		5451
		5452	If you know of other additional requirements drop me a note.
		5453
		5454
2619	=head1 COMPLEXITIES	5455	=head1 ALGORITHMIC COMPLEXITIES
2620		5456
2621	In this section the complexities of (many of) the algorithms used inside	5457	In this section the complexities of (many of) the algorithms used inside
2622	libev will be explained. For complexity discussions about backends see the	5458	libev will be documented. For complexity discussions about backends see
2623	documentation for C<ev_default_init>.	5459	the documentation for C<ev_default_init>.
2624		5460
2625	All of the following are about amortised time: If an array needs to be	5461	All of the following are about amortised time: If an array needs to be
2626	extended, libev needs to realloc and move the whole array, but this	5462	extended, libev needs to realloc and move the whole array, but this
2627	happens asymptotically never with higher number of elements, so O(1) might	5463	happens asymptotically rarer with higher number of elements, so O(1) might
2628	mean it might do a lengthy realloc operation in rare cases, but on average	5464	mean that libev does a lengthy realloc operation in rare cases, but on
2629	it is much faster and asymptotically approaches constant time.	5465	average it is much faster and asymptotically approaches constant time.
2630		5466
2631	=over 4	5467	=over 4
2632		5468
2633	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)	5469	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)
2634		5470
2635	This means that, when you have a watcher that triggers in one hour and	5471	This means that, when you have a watcher that triggers in one hour and
2636	there are 100 watchers that would trigger before that then inserting will	5472	there are 100 watchers that would trigger before that, then inserting will
2637	have to skip those 100 watchers.	5473	have to skip roughly seven (C<ld 100>) of these watchers.
2638		5474
2639	=item Changing timer/periodic watchers (by autorepeat, again): O(log skipped_other_timers)	5475	=item Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)
2640		5476
2641	That means that for changing a timer costs less than removing/adding them	5477	That means that changing a timer costs less than removing/adding them,
2642	as only the relative motion in the event queue has to be paid for.	5478	as only the relative motion in the event queue has to be paid for.
2643		5479
2644	=item Starting io/check/prepare/idle/signal/child watchers: O(1)	5480	=item Starting io/check/prepare/idle/signal/child/fork/async watchers: O(1)
2645		5481
2646	These just add the watcher into an array or at the head of a list.	5482	These just add the watcher into an array or at the head of a list.
		5483
2647	=item Stopping check/prepare/idle watchers: O(1)	5484	=item Stopping check/prepare/idle/fork/async watchers: O(1)
2648		5485
2649	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))	5486	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
2650		5487
2651	These watchers are stored in lists then need to be walked to find the	5488	These watchers are stored in lists, so they need to be walked to find the
2652	correct watcher to remove. The lists are usually short (you don't usually	5489	correct watcher to remove. The lists are usually short (you don't usually
2653	have many watchers waiting for the same fd or signal).	5490	have many watchers waiting for the same fd or signal: one is typical, two
		5491	is rare).
2654		5492
2655	=item Finding the next timer per loop iteration: O(1)	5493	=item Finding the next timer in each loop iteration: O(1)
		5494
		5495	By virtue of using a binary or 4-heap, the next timer is always found at a
		5496	fixed position in the storage array.
2656		5497
2657	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)	5498	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
2658		5499
2659	A change means an I/O watcher gets started or stopped, which requires	5500	A change means an I/O watcher gets started or stopped, which requires
2660	libev to recalculate its status (and possibly tell the kernel).	5501	libev to recalculate its status (and possibly tell the kernel, depending
		5502	on backend and whether C<ev_io_set> was used).
2661		5503
2662	=item Activating one watcher: O(1)	5504	=item Activating one watcher (putting it into the pending state): O(1)
2663		5505
2664	=item Priority handling: O(number_of_priorities)	5506	=item Priority handling: O(number_of_priorities)
2665		5507
2666	Priorities are implemented by allocating some space for each	5508	Priorities are implemented by allocating some space for each
2667	priority. When doing priority-based operations, libev usually has to	5509	priority. When doing priority-based operations, libev usually has to
2668	linearly search all the priorities.	5510	linearly search all the priorities, but starting/stopping and activating
		5511	watchers becomes O(1) with respect to priority handling.
		5512
		5513	=item Sending an ev_async: O(1)
		5514
		5515	=item Processing ev_async_send: O(number_of_async_watchers)
		5516
		5517	=item Processing signals: O(max_signal_number)
		5518
		5519	Sending involves a system call I<iff> there were no other C<ev_async_send>
		5520	calls in the current loop iteration and the loop is currently
		5521	blocked. Checking for async and signal events involves iterating over all
		5522	running async watchers or all signal numbers.
2669		5523
2670	=back	5524	=back
2671		5525
2672		5526
		5527	=head1 PORTING FROM LIBEV 3.X TO 4.X
		5528
		5529	The major version 4 introduced some incompatible changes to the API.
		5530
		5531	At the moment, the C<ev.h> header file provides compatibility definitions
		5532	for all changes, so most programs should still compile. The compatibility
		5533	layer might be removed in later versions of libev, so better update to the
		5534	new API early than late.
		5535
		5536	=over 4
		5537
		5538	=item C<EV_COMPAT3> backwards compatibility mechanism
		5539
		5540	The backward compatibility mechanism can be controlled by
		5541	C<EV_COMPAT3>. See L</"PREPROCESSOR SYMBOLS/MACROS"> in the L</EMBEDDING>
		5542	section.
		5543
		5544	=item C<ev_default_destroy> and C<ev_default_fork> have been removed
		5545
		5546	These calls can be replaced easily by their C<ev_loop_xxx> counterparts:
		5547
		5548	ev_loop_destroy (EV_DEFAULT_UC);
		5549	ev_loop_fork (EV_DEFAULT);
		5550
		5551	=item function/symbol renames
		5552
		5553	A number of functions and symbols have been renamed:
		5554
		5555	ev_loop => ev_run
		5556	EVLOOP_NONBLOCK => EVRUN_NOWAIT
		5557	EVLOOP_ONESHOT => EVRUN_ONCE
		5558
		5559	ev_unloop => ev_break
		5560	EVUNLOOP_CANCEL => EVBREAK_CANCEL
		5561	EVUNLOOP_ONE => EVBREAK_ONE
		5562	EVUNLOOP_ALL => EVBREAK_ALL
		5563
		5564	EV_TIMEOUT => EV_TIMER
		5565
		5566	ev_loop_count => ev_iteration
		5567	ev_loop_depth => ev_depth
		5568	ev_loop_verify => ev_verify
		5569
		5570	Most functions working on C<struct ev_loop> objects don't have an
		5571	C<ev_loop_> prefix, so it was removed; C<ev_loop>, C<ev_unloop> and
		5572	associated constants have been renamed to not collide with the C<struct
		5573	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme
		5574	as all other watcher types. Note that C<ev_loop_fork> is still called
		5575	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>
		5576	typedef.
		5577
		5578	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>
		5579
		5580	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different
		5581	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile
		5582	and work, but the library code will of course be larger.
		5583
		5584	=back
		5585
		5586
		5587	=head1 GLOSSARY
		5588
		5589	=over 4
		5590
		5591	=item active
		5592
		5593	A watcher is active as long as it has been started and not yet stopped.
		5594	See L</WATCHER STATES> for details.
		5595
		5596	=item application
		5597
		5598	In this document, an application is whatever is using libev.
		5599
		5600	=item backend
		5601
		5602	The part of the code dealing with the operating system interfaces.
		5603
		5604	=item callback
		5605
		5606	The address of a function that is called when some event has been
		5607	detected. Callbacks are being passed the event loop, the watcher that
		5608	received the event, and the actual event bitset.
		5609
		5610	=item callback/watcher invocation
		5611
		5612	The act of calling the callback associated with a watcher.
		5613
		5614	=item event
		5615
		5616	A change of state of some external event, such as data now being available
		5617	for reading on a file descriptor, time having passed or simply not having
		5618	any other events happening anymore.
		5619
		5620	In libev, events are represented as single bits (such as C<EV_READ> or
		5621	C<EV_TIMER>).
		5622
		5623	=item event library
		5624
		5625	A software package implementing an event model and loop.
		5626
		5627	=item event loop
		5628
		5629	An entity that handles and processes external events and converts them
		5630	into callback invocations.
		5631
		5632	=item event model
		5633
		5634	The model used to describe how an event loop handles and processes
		5635	watchers and events.
		5636
		5637	=item pending
		5638
		5639	A watcher is pending as soon as the corresponding event has been
		5640	detected. See L</WATCHER STATES> for details.
		5641
		5642	=item real time
		5643
		5644	The physical time that is observed. It is apparently strictly monotonic :)
		5645
		5646	=item wall-clock time
		5647
		5648	The time and date as shown on clocks. Unlike real time, it can actually
		5649	be wrong and jump forwards and backwards, e.g. when you adjust your
		5650	clock.
		5651
		5652	=item watcher
		5653
		5654	A data structure that describes interest in certain events. Watchers need
		5655	to be started (attached to an event loop) before they can receive events.
		5656
		5657	=back
		5658
2673	=head1 AUTHOR	5659	=head1 AUTHOR
2674		5660
2675	Marc Lehmann <libev@schmorp.de>.	5661	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael
		5662	Magnusson and Emanuele Giaquinta, and minor corrections by many others.
2676		5663

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines