[ViewVC] Diff of: cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.136 by root, Thu Mar 13 13:06:16 2008 UTC vs.
Revision 1.150 by root, Tue May 6 23:34:16 2008 UTC

…		…
196	See the description of C<ev_embed> watchers for more info.	196	See the description of C<ev_embed> watchers for more info.
197		197
198	=item ev_set_allocator (void (cb)(void *ptr, long size))	198	=item ev_set_allocator (void (cb)(void *ptr, long size))
199		199
200	Sets the allocation function to use (the prototype is similar - the	200	Sets the allocation function to use (the prototype is similar - the
201	semantics is identical - to the realloc C function). It is used to	201	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
202	allocate and free memory (no surprises here). If it returns zero when	202	used to allocate and free memory (no surprises here). If it returns zero
203	memory needs to be allocated, the library might abort or take some	203	when memory needs to be allocated (C<size != 0>), the library might abort
204	potentially destructive action. The default is your system realloc	204	or take some potentially destructive action.
205	function.	205
		206	Since some systems (at least OpenBSD and Darwin) fail to implement
		207	correct C<realloc> semantics, libev will use a wrapper around the system
		208	C<realloc> and C<free> functions by default.
206		209
207	You could override this function in high-availability programs to, say,	210	You could override this function in high-availability programs to, say,
208	free some memory if it cannot allocate memory, to use a special allocator,	211	free some memory if it cannot allocate memory, to use a special allocator,
209	or even to sleep a while and retry until some memory is available.	212	or even to sleep a while and retry until some memory is available.
210		213
211	Example: Replace the libev allocator with one that waits a bit and then	214	Example: Replace the libev allocator with one that waits a bit and then
212	retries).	215	retries (example requires a standards-compliant C<realloc>).
213		216
214	static void *	217	static void *
215	persistent_realloc (void *ptr, size_t size)	218	persistent_realloc (void *ptr, size_t size)
216	{	219	{
217	for (;;)	220	for (;;)
…		…
256		259
257	An event loop is described by a C<struct ev_loop *>. The library knows two	260	An event loop is described by a C<struct ev_loop *>. The library knows two
258	types of such loops, the I<default> loop, which supports signals and child	261	types of such loops, the I<default> loop, which supports signals and child
259	events, and dynamically created loops which do not.	262	events, and dynamically created loops which do not.
260		263
261	If you use threads, a common model is to run the default event loop
262	in your main thread (or in a separate thread) and for each thread you
263	create, you also create another event loop. Libev itself does no locking
264	whatsoever, so if you mix calls to the same event loop in different
265	threads, make sure you lock (this is usually a bad idea, though, even if
266	done correctly, because it's hideous and inefficient).
267
268	=over 4	264	=over 4
269		265
270	=item struct ev_loop *ev_default_loop (unsigned int flags)	266	=item struct ev_loop *ev_default_loop (unsigned int flags)
271		267
272	This will initialise the default event loop if it hasn't been initialised	268	This will initialise the default event loop if it hasn't been initialised
…		…
274	false. If it already was initialised it simply returns it (and ignores the	270	false. If it already was initialised it simply returns it (and ignores the
275	flags. If that is troubling you, check C<ev_backend ()> afterwards).	271	flags. If that is troubling you, check C<ev_backend ()> afterwards).
276		272
277	If you don't know what event loop to use, use the one returned from this	273	If you don't know what event loop to use, use the one returned from this
278	function.	274	function.
		275
		276	Note that this function is I<not> thread-safe, so if you want to use it
		277	from multiple threads, you have to lock (note also that this is unlikely,
		278	as loops cannot bes hared easily between threads anyway).
279		279
280	The default loop is the only loop that can handle C<ev_signal> and	280	The default loop is the only loop that can handle C<ev_signal> and
281	C<ev_child> watchers, and to do this, it always registers a handler	281	C<ev_child> watchers, and to do this, it always registers a handler
282	for C<SIGCHLD>. If this is a problem for your app you can either	282	for C<SIGCHLD>. If this is a problem for your app you can either
283	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you	283	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you
…		…
354	For few fds, this backend is a bit little slower than poll and select,	354	For few fds, this backend is a bit little slower than poll and select,
355	but it scales phenomenally better. While poll and select usually scale	355	but it scales phenomenally better. While poll and select usually scale
356	like O(total_fds) where n is the total number of fds (or the highest fd),	356	like O(total_fds) where n is the total number of fds (or the highest fd),
357	epoll scales either O(1) or O(active_fds). The epoll design has a number	357	epoll scales either O(1) or O(active_fds). The epoll design has a number
358	of shortcomings, such as silently dropping events in some hard-to-detect	358	of shortcomings, such as silently dropping events in some hard-to-detect
359	cases and rewiring a syscall per fd change, no fork support and bad	359	cases and requiring a syscall per fd change, no fork support and bad
360	support for dup.	360	support for dup.
361		361
362	While stopping, setting and starting an I/O watcher in the same iteration	362	While stopping, setting and starting an I/O watcher in the same iteration
363	will result in some caching, there is still a syscall per such incident	363	will result in some caching, there is still a syscall per such incident
364	(because the fd could point to a different file description now), so its	364	(because the fd could point to a different file description now), so its
…		…
465		465
466	Similar to C<ev_default_loop>, but always creates a new event loop that is	466	Similar to C<ev_default_loop>, but always creates a new event loop that is
467	always distinct from the default loop. Unlike the default loop, it cannot	467	always distinct from the default loop. Unlike the default loop, it cannot
468	handle signal and child watchers, and attempts to do so will be greeted by	468	handle signal and child watchers, and attempts to do so will be greeted by
469	undefined behaviour (or a failed assertion if assertions are enabled).	469	undefined behaviour (or a failed assertion if assertions are enabled).
		470
		471	Note that this function I<is> thread-safe, and the recommended way to use
		472	libev with threads is indeed to create one loop per thread, and using the
		473	default loop in the "main" or "initial" thread.
470		474
471	Example: Try to create a event loop that uses epoll and nothing else.	475	Example: Try to create a event loop that uses epoll and nothing else.
472		476
473	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL \| EVFLAG_NOENV);	477	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL \| EVFLAG_NOENV);
474	if (!epoller)	478	if (!epoller)
…		…
1085	To support fork in your programs, you either have to call	1089	To support fork in your programs, you either have to call
1086	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,	1090	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,
1087	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or	1091	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or
1088	C<EVBACKEND_POLL>.	1092	C<EVBACKEND_POLL>.
1089		1093
		1094	=head3 The special problem of SIGPIPE
		1095
		1096	While not really specific to libev, it is easy to forget about SIGPIPE:
		1097	when reading from a pipe whose other end has been closed, your program
		1098	gets send a SIGPIPE, which, by default, aborts your program. For most
		1099	programs this is sensible behaviour, for daemons, this is usually
		1100	undesirable.
		1101
		1102	So when you encounter spurious, unexplained daemon exits, make sure you
		1103	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
		1104	somewhere, as that would have given you a big clue).
		1105
1090		1106
1091	=head3 Watcher-Specific Functions	1107	=head3 Watcher-Specific Functions
1092		1108
1093	=over 4	1109	=over 4
1094		1110
…		…
1357	Simply stops and restarts the periodic watcher again. This is only useful	1373	Simply stops and restarts the periodic watcher again. This is only useful
1358	when you changed some parameters or the reschedule callback would return	1374	when you changed some parameters or the reschedule callback would return
1359	a different time than the last time it was called (e.g. in a crond like	1375	a different time than the last time it was called (e.g. in a crond like
1360	program when the crontabs have changed).	1376	program when the crontabs have changed).
1361		1377
		1378	=item ev_tstamp ev_periodic_at (ev_periodic *)
		1379
		1380	When active, returns the absolute time that the watcher is supposed to
		1381	trigger next.
		1382
1362	=item ev_tstamp offset [read-write]	1383	=item ev_tstamp offset [read-write]
1363		1384
1364	When repeating, this contains the offset value, otherwise this is the	1385	When repeating, this contains the offset value, otherwise this is the
1365	absolute point in time (the C<at> value passed to C<ev_periodic_set>).	1386	absolute point in time (the C<at> value passed to C<ev_periodic_set>).
1366		1387
…		…
1376	=item ev_tstamp (reschedule_cb)(struct ev_periodic w, ev_tstamp now) [read-write]	1397	=item ev_tstamp (reschedule_cb)(struct ev_periodic w, ev_tstamp now) [read-write]
1377		1398
1378	The current reschedule callback, or C<0>, if this functionality is	1399	The current reschedule callback, or C<0>, if this functionality is
1379	switched off. Can be changed any time, but changes only take effect when	1400	switched off. Can be changed any time, but changes only take effect when
1380	the periodic timer fires or C<ev_periodic_again> is being called.	1401	the periodic timer fires or C<ev_periodic_again> is being called.
1381
1382	=item ev_tstamp at [read-only]
1383
1384	When active, contains the absolute time that the watcher is supposed to
1385	trigger next.
1386		1402
1387	=back	1403	=back
1388		1404
1389	=head3 Examples	1405	=head3 Examples
1390		1406
…		…
1594	as even with OS-supported change notifications, this can be	1610	as even with OS-supported change notifications, this can be
1595	resource-intensive.	1611	resource-intensive.
1596		1612
1597	At the time of this writing, only the Linux inotify interface is	1613	At the time of this writing, only the Linux inotify interface is
1598	implemented (implementing kqueue support is left as an exercise for the	1614	implemented (implementing kqueue support is left as an exercise for the
		1615	reader, note, however, that the author sees no way of implementing ev_stat
1599	reader). Inotify will be used to give hints only and should not change the	1616	semantics with kqueue). Inotify will be used to give hints only and should
1600	semantics of C<ev_stat> watchers, which means that libev sometimes needs	1617	not change the semantics of C<ev_stat> watchers, which means that libev
1601	to fall back to regular polling again even with inotify, but changes are	1618	sometimes needs to fall back to regular polling again even with inotify,
1602	usually detected immediately, and if the file exists there will be no	1619	but changes are usually detected immediately, and if the file exists there
1603	polling.	1620	will be no polling.
		1621
		1622	=head3 ABI Issues (Largefile Support)
		1623
		1624	Libev by default (unless the user overrides this) uses the default
		1625	compilation environment, which means that on systems with optionally
		1626	disabled large file support, you get the 32 bit version of the stat
		1627	structure. When using the library from programs that change the ABI to
		1628	use 64 bit file offsets the programs will fail. In that case you have to
		1629	compile libev with the same flags to get binary compatibility. This is
		1630	obviously the case with any flags that change the ABI, but the problem is
		1631	most noticably with ev_stat and largefile support.
1604		1632
1605	=head3 Inotify	1633	=head3 Inotify
1606		1634
1607	When C<inotify (7)> support has been compiled into libev (generally only	1635	When C<inotify (7)> support has been compiled into libev (generally only
1608	available on Linux) and present at runtime, it will be used to speed up	1636	available on Linux) and present at runtime, it will be used to speed up
1609	change detection where possible. The inotify descriptor will be created lazily	1637	change detection where possible. The inotify descriptor will be created lazily
1610	when the first C<ev_stat> watcher is being started.	1638	when the first C<ev_stat> watcher is being started.
1611		1639
1612	Inotify presense does not change the semantics of C<ev_stat> watchers	1640	Inotify presence does not change the semantics of C<ev_stat> watchers
1613	except that changes might be detected earlier, and in some cases, to avoid	1641	except that changes might be detected earlier, and in some cases, to avoid
1614	making regular C<stat> calls. Even in the presense of inotify support	1642	making regular C<stat> calls. Even in the presence of inotify support
1615	there are many cases where libev has to resort to regular C<stat> polling.	1643	there are many cases where libev has to resort to regular C<stat> polling.
1616		1644
1617	(There is no support for kqueue, as apparently it cannot be used to	1645	(There is no support for kqueue, as apparently it cannot be used to
1618	implement this functionality, due to the requirement of having a file	1646	implement this functionality, due to the requirement of having a file
1619	descriptor open on the object at all times).	1647	descriptor open on the object at all times).
…		…
1622		1650
1623	The C<stat ()> syscall only supports full-second resolution portably, and	1651	The C<stat ()> syscall only supports full-second resolution portably, and
1624	even on systems where the resolution is higher, many filesystems still	1652	even on systems where the resolution is higher, many filesystems still
1625	only support whole seconds.	1653	only support whole seconds.
1626		1654
1627	That means that, if the time is the only thing that changes, you might	1655	That means that, if the time is the only thing that changes, you can
1628	miss updates: on the first update, C<ev_stat> detects a change and calls	1656	easily miss updates: on the first update, C<ev_stat> detects a change and
1629	your callback, which does something. When there is another update within	1657	calls your callback, which does something. When there is another update
1630	the same second, C<ev_stat> will be unable to detect it.	1658	within the same second, C<ev_stat> will be unable to detect it as the stat
		1659	data does not change.
1631		1660
1632	The solution to this is to delay acting on a change for a second (or till	1661	The solution to this is to delay acting on a change for slightly more
1633	the next second boundary), using a roughly one-second delay C<ev_timer>	1662	than second (or till slightly after the next full second boundary), using
1634	(C<ev_timer_set (w, 0., 1.01); ev_timer_again (loop, w)>). The C<.01>	1663	a roughly one-second-delay C<ev_timer> (e.g. C<ev_timer_set (w, 0., 1.02);
1635	is added to work around small timing inconsistencies of some operating	1664	ev_timer_again (loop, w)>).
1636	systems.	1665
		1666	The C<.02> offset is added to work around small timing inconsistencies
		1667	of some operating systems (where the second counter of the current time
		1668	might be be delayed. One such system is the Linux kernel, where a call to
		1669	C<gettimeofday> might return a timestamp with a full second later than
		1670	a subsequent C<time> call - if the equivalent of C<time ()> is used to
		1671	update file times then there will be a small window where the kernel uses
		1672	the previous second to update file times but libev might already execute
		1673	the timer callback).
1637		1674
1638	=head3 Watcher-Specific Functions and Data Members	1675	=head3 Watcher-Specific Functions and Data Members
1639		1676
1640	=over 4	1677	=over 4
1641		1678
…		…
1647	C<path>. The C<interval> is a hint on how quickly a change is expected to	1684	C<path>. The C<interval> is a hint on how quickly a change is expected to
1648	be detected and should normally be specified as C<0> to let libev choose	1685	be detected and should normally be specified as C<0> to let libev choose
1649	a suitable value. The memory pointed to by C<path> must point to the same	1686	a suitable value. The memory pointed to by C<path> must point to the same
1650	path for as long as the watcher is active.	1687	path for as long as the watcher is active.
1651		1688
1652	The callback will be receive C<EV_STAT> when a change was detected,	1689	The callback will receive C<EV_STAT> when a change was detected, relative
1653	relative to the attributes at the time the watcher was started (or the	1690	to the attributes at the time the watcher was started (or the last change
1654	last change was detected).	1691	was detected).
1655		1692
1656	=item ev_stat_stat (loop, ev_stat *)	1693	=item ev_stat_stat (loop, ev_stat *)
1657		1694
1658	Updates the stat buffer immediately with new values. If you change the	1695	Updates the stat buffer immediately with new values. If you change the
1659	watched path in your callback, you could call this fucntion to avoid	1696	watched path in your callback, you could call this function to avoid
1660	detecting this change (while introducing a race condition). Can also be	1697	detecting this change (while introducing a race condition if you are not
1661	useful simply to find out the new values.	1698	the only one changing the path). Can also be useful simply to find out the
		1699	new values.
1662		1700
1663	=item ev_statdata attr [read-only]	1701	=item ev_statdata attr [read-only]
1664		1702
1665	The most-recently detected attributes of the file. Although the type is of	1703	The most-recently detected attributes of the file. Although the type is
1666	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types	1704	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types
1667	suitable for your system. If the C<st_nlink> member is C<0>, then there	1705	suitable for your system, but you can only rely on the POSIX-standardised
		1706	members to be present. If the C<st_nlink> member is C<0>, then there was
1668	was some error while C<stat>ing the file.	1707	some error while C<stat>ing the file.
1669		1708
1670	=item ev_statdata prev [read-only]	1709	=item ev_statdata prev [read-only]
1671		1710
1672	The previous attributes of the file. The callback gets invoked whenever	1711	The previous attributes of the file. The callback gets invoked whenever
1673	C<prev> != C<attr>.	1712	C<prev> != C<attr>, or, more precisely, one or more of these members
		1713	differ: C<st_dev>, C<st_ino>, C<st_mode>, C<st_nlink>, C<st_uid>,
		1714	C<st_gid>, C<st_rdev>, C<st_size>, C<st_atime>, C<st_mtime>, C<st_ctime>.
1674		1715
1675	=item ev_tstamp interval [read-only]	1716	=item ev_tstamp interval [read-only]
1676		1717
1677	The specified interval.	1718	The specified interval.
1678		1719
…		…
1732	}	1773	}
1733		1774
1734	...	1775	...
1735	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);	1776	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);
1736	ev_stat_start (loop, &passwd);	1777	ev_stat_start (loop, &passwd);
1737	ev_timer_init (&timer, timer_cb, 0., 1.01);	1778	ev_timer_init (&timer, timer_cb, 0., 1.02);
1738		1779
1739		1780
1740	=head2 C<ev_idle> - when you've got nothing better to do...	1781	=head2 C<ev_idle> - when you've got nothing better to do...
1741		1782
1742	Idle watchers trigger events when no other events of the same or higher	1783	Idle watchers trigger events when no other events of the same or higher
…		…
1830		1871
1831	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)	1872	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)
1832	priority, to ensure that they are being run before any other watchers	1873	priority, to ensure that they are being run before any other watchers
1833	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,	1874	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,
1834	too) should not activate ("feed") events into libev. While libev fully	1875	too) should not activate ("feed") events into libev. While libev fully
1835	supports this, they will be called before other C<ev_check> watchers	1876	supports this, they might get executed before other C<ev_check> watchers
1836	did their job. As C<ev_check> watchers are often used to embed other	1877	did their job. As C<ev_check> watchers are often used to embed other
1837	(non-libev) event loops those other event loops might be in an unusable	1878	(non-libev) event loops those other event loops might be in an unusable
1838	state until their C<ev_check> watcher ran (always remind yourself to	1879	state until their C<ev_check> watcher ran (always remind yourself to
1839	coexist peacefully with others).	1880	coexist peacefully with others).
1840		1881
…		…
1855	=head3 Examples	1896	=head3 Examples
1856		1897
1857	There are a number of principal ways to embed other event loops or modules	1898	There are a number of principal ways to embed other event loops or modules
1858	into libev. Here are some ideas on how to include libadns into libev	1899	into libev. Here are some ideas on how to include libadns into libev
1859	(there is a Perl module named C<EV::ADNS> that does this, which you could	1900	(there is a Perl module named C<EV::ADNS> that does this, which you could
1860	use for an actually working example. Another Perl module named C<EV::Glib>	1901	use as a working example. Another Perl module named C<EV::Glib> embeds a
1861	embeds a Glib main context into libev, and finally, C<Glib::EV> embeds EV	1902	Glib main context into libev, and finally, C<Glib::EV> embeds EV into the
1862	into the Glib event loop).	1903	Glib event loop).
1863		1904
1864	Method 1: Add IO watchers and a timeout watcher in a prepare handler,	1905	Method 1: Add IO watchers and a timeout watcher in a prepare handler,
1865	and in a check watcher, destroy them and call into libadns. What follows	1906	and in a check watcher, destroy them and call into libadns. What follows
1866	is pseudo-code only of course. This requires you to either use a low	1907	is pseudo-code only of course. This requires you to either use a low
1867	priority for the check watcher or use C<ev_clear_pending> explicitly, as	1908	priority for the check watcher or use C<ev_clear_pending> explicitly, as
…		…
2257		2298
2258	This call incurs the overhead of a syscall only once per loop iteration,	2299	This call incurs the overhead of a syscall only once per loop iteration,
2259	so while the overhead might be noticable, it doesn't apply to repeated	2300	so while the overhead might be noticable, it doesn't apply to repeated
2260	calls to C<ev_async_send>.	2301	calls to C<ev_async_send>.
2261		2302
		2303	=item bool = ev_async_pending (ev_async *)
		2304
		2305	Returns a non-zero value when C<ev_async_send> has been called on the
		2306	watcher but the event has not yet been processed (or even noted) by the
		2307	event loop.
		2308
		2309	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When
		2310	the loop iterates next and checks for the watcher to have become active,
		2311	it will reset the flag again. C<ev_async_pending> can be used to very
		2312	quickly check wether invoking the loop might be a good idea.
		2313
		2314	Not that this does I<not> check wether the watcher itself is pending, only
		2315	wether it has been requested to make this watcher pending.
		2316
2262	=back	2317	=back
2263		2318
2264		2319
2265	=head1 OTHER FUNCTIONS	2320	=head1 OTHER FUNCTIONS
2266		2321
…		…
2337		2392
2338	=item * Priorities are not currently supported. Initialising priorities	2393	=item * Priorities are not currently supported. Initialising priorities
2339	will fail and all watchers will have the same priority, even though there	2394	will fail and all watchers will have the same priority, even though there
2340	is an ev_pri field.	2395	is an ev_pri field.
2341		2396
		2397	=item * In libevent, the last base created gets the signals, in libev, the
		2398	first base created (== the default loop) gets the signals.
		2399
2342	=item * Other members are not supported.	2400	=item * Other members are not supported.
2343		2401
2344	=item * The libev emulation is I<not> ABI compatible to libevent, you need	2402	=item * The libev emulation is I<not> ABI compatible to libevent, you need
2345	to use the libev header file and library.	2403	to use the libev header file and library.
2346		2404
…		…
2588	=item C<EV_DEFAULT>, C<EV_DEFAULT_>	2646	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
2589		2647
2590	Similar to the other two macros, this gives you the value of the default	2648	Similar to the other two macros, this gives you the value of the default
2591	loop, if multiple loops are supported ("ev loop default").	2649	loop, if multiple loops are supported ("ev loop default").
2592		2650
		2651	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
		2652
		2653	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
		2654	default loop has been initialised (C<UC> == unchecked). Their behaviour
		2655	is undefined when the default loop has not been initialised by a previous
		2656	execution of C<EV_DEFAULT>, C<EV_DEFAULT_> or C<ev_default_init (...)>.
		2657
		2658	It is often prudent to use C<EV_DEFAULT> when initialising the first
		2659	watcher in a function but use C<EV_DEFAULT_UC> afterwards.
		2660
2593	=back	2661	=back
2594		2662
2595	Example: Declare and initialise a check watcher, utilising the above	2663	Example: Declare and initialise a check watcher, utilising the above
2596	macros so it will work regardless of whether multiple loops are supported	2664	macros so it will work regardless of whether multiple loops are supported
2597	or not.	2665	or not.
…		…
2692		2760
2693	libev.m4	2761	libev.m4
2694		2762
2695	=head2 PREPROCESSOR SYMBOLS/MACROS	2763	=head2 PREPROCESSOR SYMBOLS/MACROS
2696		2764
2697	Libev can be configured via a variety of preprocessor symbols you have to define	2765	Libev can be configured via a variety of preprocessor symbols you have to
2698	before including any of its files. The default is not to build for multiplicity	2766	define before including any of its files. The default in the absense of
2699	and only include the select backend.	2767	autoconf is noted for every option.
2700		2768
2701	=over 4	2769	=over 4
2702		2770
2703	=item EV_STANDALONE	2771	=item EV_STANDALONE
2704		2772
…		…
2730	=item EV_USE_NANOSLEEP	2798	=item EV_USE_NANOSLEEP
2731		2799
2732	If defined to be C<1>, libev will assume that C<nanosleep ()> is available	2800	If defined to be C<1>, libev will assume that C<nanosleep ()> is available
2733	and will use it for delays. Otherwise it will use C<select ()>.	2801	and will use it for delays. Otherwise it will use C<select ()>.
2734		2802
		2803	=item EV_USE_EVENTFD
		2804
		2805	If defined to be C<1>, then libev will assume that C<eventfd ()> is
		2806	available and will probe for kernel support at runtime. This will improve
		2807	C<ev_signal> and C<ev_async> performance and reduce resource consumption.
		2808	If undefined, it will be enabled if the headers indicate GNU/Linux + Glibc
		2809	2.7 or newer, otherwise disabled.
		2810
2735	=item EV_USE_SELECT	2811	=item EV_USE_SELECT
2736		2812
2737	If undefined or defined to be C<1>, libev will compile in support for the	2813	If undefined or defined to be C<1>, libev will compile in support for the
2738	C<select>(2) backend. No attempt at autodetection will be done: if no	2814	C<select>(2) backend. No attempt at autodetection will be done: if no
2739	other method takes over, select will be it. Otherwise the select backend	2815	other method takes over, select will be it. Otherwise the select backend
…		…
2775		2851
2776	=item EV_USE_EPOLL	2852	=item EV_USE_EPOLL
2777		2853
2778	If defined to be C<1>, libev will compile in support for the Linux	2854	If defined to be C<1>, libev will compile in support for the Linux
2779	C<epoll>(7) backend. Its availability will be detected at runtime,	2855	C<epoll>(7) backend. Its availability will be detected at runtime,
2780	otherwise another method will be used as fallback. This is the	2856	otherwise another method will be used as fallback. This is the preferred
2781	preferred backend for GNU/Linux systems.	2857	backend for GNU/Linux systems. If undefined, it will be enabled if the
		2858	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
2782		2859
2783	=item EV_USE_KQUEUE	2860	=item EV_USE_KQUEUE
2784		2861
2785	If defined to be C<1>, libev will compile in support for the BSD style	2862	If defined to be C<1>, libev will compile in support for the BSD style
2786	C<kqueue>(2) backend. Its actual availability will be detected at runtime,	2863	C<kqueue>(2) backend. Its actual availability will be detected at runtime,
…		…
2805		2882
2806	=item EV_USE_INOTIFY	2883	=item EV_USE_INOTIFY
2807		2884
2808	If defined to be C<1>, libev will compile in support for the Linux inotify	2885	If defined to be C<1>, libev will compile in support for the Linux inotify
2809	interface to speed up C<ev_stat> watchers. Its actual availability will	2886	interface to speed up C<ev_stat> watchers. Its actual availability will
2810	be detected at runtime.	2887	be detected at runtime. If undefined, it will be enabled if the headers
		2888	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
2811		2889
2812	=item EV_ATOMIC_T	2890	=item EV_ATOMIC_T
2813		2891
2814	Libev requires an integer type (suitable for storing C<0> or C<1>) whose	2892	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
2815	access is atomic with respect to other threads or signal contexts. No such	2893	access is atomic with respect to other threads or signal contexts. No such
…		…
3002		3080
3003	#include "ev_cpp.h"	3081	#include "ev_cpp.h"
3004	#include "ev.c"	3082	#include "ev.c"
3005		3083
3006		3084
		3085	=head1 THREADS AND COROUTINES
		3086
		3087	=head2 THREADS
		3088
		3089	Libev itself is completely threadsafe, but it uses no locking. This
		3090	means that you can use as many loops as you want in parallel, as long as
		3091	only one thread ever calls into one libev function with the same loop
		3092	parameter.
		3093
		3094	Or put differently: calls with different loop parameters can be done in
		3095	parallel from multiple threads, calls with the same loop parameter must be
		3096	done serially (but can be done from different threads, as long as only one
		3097	thread ever is inside a call at any point in time, e.g. by using a mutex
		3098	per loop).
		3099
		3100	If you want to know which design is best for your problem, then I cannot
		3101	help you but by giving some generic advice:
		3102
		3103	=over 4
		3104
		3105	=item * most applications have a main thread: use the default libev loop
		3106	in that thread, or create a seperate thread running only the default loop.
		3107
		3108	This helps integrating other libraries or software modules that use libev
		3109	themselves and don't care/know about threading.
		3110
		3111	=item * one loop per thread is usually a good model.
		3112
		3113	Doing this is almost never wrong, sometimes a better-performance model
		3114	exists, but it is always a good start.
		3115
		3116	=item * other models exist, such as the leader/follower pattern, where one
		3117	loop is handed through multiple threads in a kind of round-robbin fashion.
		3118
		3119	Chosing a model is hard - look around, learn, know that usually you cna do
		3120	better than you currently do :-)
		3121
		3122	=item * often you need to talk to some other thread which blocks in the
		3123	event loop - C<ev_async> watchers can be used to wake them up from other
		3124	threads safely (or from signal contexts...).
		3125
		3126	=back
		3127
		3128	=head2 COROUTINES
		3129
		3130	Libev is much more accomodating to coroutines ("cooperative threads"):
		3131	libev fully supports nesting calls to it's functions from different
		3132	coroutines (e.g. you can call C<ev_loop> on the same loop from two
		3133	different coroutines and switch freely between both coroutines running the
		3134	loop, as long as you don't confuse yourself). The only exception is that
		3135	you must not do this from C<ev_periodic> reschedule callbacks.
		3136
		3137	Care has been invested into making sure that libev does not keep local
		3138	state inside C<ev_loop>, and other calls do not usually allow coroutine
		3139	switches.
		3140
		3141
3007	=head1 COMPLEXITIES	3142	=head1 COMPLEXITIES
3008		3143
3009	In this section the complexities of (many of) the algorithms used inside	3144	In this section the complexities of (many of) the algorithms used inside
3010	libev will be explained. For complexity discussions about backends see the	3145	libev will be explained. For complexity discussions about backends see the
3011	documentation for C<ev_default_init>.	3146	documentation for C<ev_default_init>.
…		…
3081	model. Libev still offers limited functionality on this platform in	3216	model. Libev still offers limited functionality on this platform in
3082	the form of the C<EVBACKEND_SELECT> backend, and only supports socket	3217	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
3083	descriptors. This only applies when using Win32 natively, not when using	3218	descriptors. This only applies when using Win32 natively, not when using
3084	e.g. cygwin.	3219	e.g. cygwin.
3085		3220
		3221	Lifting these limitations would basically require the full
		3222	re-implementation of the I/O system. If you are into these kinds of
		3223	things, then note that glib does exactly that for you in a very portable
		3224	way (note also that glib is the slowest event library known to man).
		3225
3086	There is no supported compilation method available on windows except	3226	There is no supported compilation method available on windows except
3087	embedding it into other applications.	3227	embedding it into other applications.
3088		3228
3089	Due to the many, low, and arbitrary limits on the win32 platform and the	3229	Due to the many, low, and arbitrary limits on the win32 platform and
3090	abysmal performance of winsockets, using a large number of sockets is not	3230	the abysmal performance of winsockets, using a large number of sockets
3091	recommended (and not reasonable). If your program needs to use more than	3231	is not recommended (and not reasonable). If your program needs to use
3092	a hundred or so sockets, then likely it needs to use a totally different	3232	more than a hundred or so sockets, then likely it needs to use a totally
3093	implementation for windows, as libev offers the POSIX model, which cannot	3233	different implementation for windows, as libev offers the POSIX readyness
3094	be implemented efficiently on windows (microsoft monopoly games).	3234	notification model, which cannot be implemented efficiently on windows
		3235	(microsoft monopoly games).
3095		3236
3096	=over 4	3237	=over 4
3097		3238
3098	=item The winsocket select function	3239	=item The winsocket select function
3099		3240
…		…
3113	Note that winsockets handling of fd sets is O(n), so you can easily get a	3254	Note that winsockets handling of fd sets is O(n), so you can easily get a
3114	complexity in the O(n²) range when using win32.	3255	complexity in the O(n²) range when using win32.
3115		3256
3116	=item Limited number of file descriptors	3257	=item Limited number of file descriptors
3117		3258
3118	Windows has numerous arbitrary (and low) limits on things. Early versions	3259	Windows has numerous arbitrary (and low) limits on things.
3119	of winsocket's select only supported waiting for a max. of C<64> handles	3260
		3261	Early versions of winsocket's select only supported waiting for a maximum
3120	(probably owning to the fact that all windows kernels can only wait for	3262	of C<64> handles (probably owning to the fact that all windows kernels
3121	C<64> things at the same time internally; microsoft recommends spawning a	3263	can only wait for C<64> things at the same time internally; microsoft
3122	chain of threads and wait for 63 handles and the previous thread in each).	3264	recommends spawning a chain of threads and wait for 63 handles and the
		3265	previous thread in each. Great).
3123		3266
3124	Newer versions support more handles, but you need to define C<FD_SETSIZE>	3267	Newer versions support more handles, but you need to define C<FD_SETSIZE>
3125	to some high number (e.g. C<2048>) before compiling the winsocket select	3268	to some high number (e.g. C<2048>) before compiling the winsocket select
3126	call (which might be in libev or elsewhere, for example, perl does its own	3269	call (which might be in libev or elsewhere, for example, perl does its own
3127	select emulation on windows).	3270	select emulation on windows).
…		…
3139	calling select (O(n²)) will likely make this unworkable.	3282	calling select (O(n²)) will likely make this unworkable.
3140		3283
3141	=back	3284	=back
3142		3285
3143		3286
		3287	=head1 PORTABILITY REQUIREMENTS
		3288
		3289	In addition to a working ISO-C implementation, libev relies on a few
		3290	additional extensions:
		3291
		3292	=over 4
		3293
		3294	=item C<sig_atomic_t volatile> must be thread-atomic as well
		3295
		3296	The type C<sig_atomic_t volatile> (or whatever is defined as
		3297	C<EV_ATOMIC_T>) must be atomic w.r.t. accesses from different
		3298	threads. This is not part of the specification for C<sig_atomic_t>, but is
		3299	believed to be sufficiently portable.
		3300
		3301	=item C<sigprocmask> must work in a threaded environment
		3302
		3303	Libev uses C<sigprocmask> to temporarily block signals. This is not
		3304	allowed in a threaded program (C<pthread_sigmask> has to be used). Typical
		3305	pthread implementations will either allow C<sigprocmask> in the "main
		3306	thread" or will block signals process-wide, both behaviours would
		3307	be compatible with libev. Interaction between C<sigprocmask> and
		3308	C<pthread_sigmask> could complicate things, however.
		3309
		3310	The most portable way to handle signals is to block signals in all threads
		3311	except the initial one, and run the default loop in the initial thread as
		3312	well.
		3313
		3314	=item C<long> must be large enough for common memory allocation sizes
		3315
		3316	To improve portability and simplify using libev, libev uses C<long>
		3317	internally instead of C<size_t> when allocating its data structures. On
		3318	non-POSIX systems (Microsoft...) this might be unexpectedly low, but
		3319	is still at least 31 bits everywhere, which is enough for hundreds of
		3320	millions of watchers.
		3321
		3322	=item C<double> must hold a time value in seconds with enough accuracy
		3323
		3324	The type C<double> is used to represent timestamps. It is required to have
		3325	at least 51 bits of mantissa, which is good enough for at least into the
		3326	year 4000. This requirement is fulfilled by implementations implementing
		3327	IEEE 754 (basically all existing ones).
		3328
		3329	=back
		3330
		3331	If you know of other additional requirements drop me a note.
		3332
		3333
3144	=head1 AUTHOR	3334	=head1 AUTHOR
3145		3335
3146	Marc Lehmann <libev@schmorp.de>.	3336	Marc Lehmann <libev@schmorp.de>.
3147		3337

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing libev/ev.pod (file contents): Revision 1.136 by root, Thu Mar 13 13:06:16 2008 UTC vs. Revision 1.150 by root, Tue May 6 23:34:16 2008 UTC

Diff Legend

Comparing libev/ev.pod (file contents):
Revision 1.136 by root, Thu Mar 13 13:06:16 2008 UTC vs.
Revision 1.150 by root, Tue May 6 23:34:16 2008 UTC