[ViewVC] Diff of: cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.97 by root, Sat Dec 22 05:48:02 2007 UTC vs.
Revision 1.138 by root, Mon Mar 31 01:14:12 2008 UTC

…		…
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	#include <ev.h>	7	#include <ev.h>
8		8
9	=head1 EXAMPLE PROGRAM	9	=head2 EXAMPLE PROGRAM
10		10
		11	// a single header file is required
11	#include <ev.h>	12	#include <ev.h>
12		13
		14	// every watcher type has its own typedef'd struct
		15	// with the name ev_<type>
13	ev_io stdin_watcher;	16	ev_io stdin_watcher;
14	ev_timer timeout_watcher;	17	ev_timer timeout_watcher;
15		18
		19	// all watcher callbacks have a similar signature
16	/* called when data readable on stdin */	20	// this callback is called when data is readable on stdin
17	static void	21	static void
18	stdin_cb (EV_P_ struct ev_io *w, int revents)	22	stdin_cb (EV_P_ struct ev_io *w, int revents)
19	{	23	{
20	/* puts ("stdin ready"); */	24	puts ("stdin ready");
21	ev_io_stop (EV_A_ w); /* just a syntax example */	25	// for one-shot events, one must manually stop the watcher
22	ev_unloop (EV_A_ EVUNLOOP_ALL); /* leave all loop calls */	26	// with its corresponding stop function.
		27	ev_io_stop (EV_A_ w);
		28
		29	// this causes all nested ev_loop's to stop iterating
		30	ev_unloop (EV_A_ EVUNLOOP_ALL);
23	}	31	}
24		32
		33	// another callback, this time for a time-out
25	static void	34	static void
26	timeout_cb (EV_P_ struct ev_timer *w, int revents)	35	timeout_cb (EV_P_ struct ev_timer *w, int revents)
27	{	36	{
28	/* puts ("timeout"); */	37	puts ("timeout");
29	ev_unloop (EV_A_ EVUNLOOP_ONE); /* leave one loop call */	38	// this causes the innermost ev_loop to stop iterating
		39	ev_unloop (EV_A_ EVUNLOOP_ONE);
30	}	40	}
31		41
32	int	42	int
33	main (void)	43	main (void)
34	{	44	{
		45	// use the default event loop unless you have special needs
35	struct ev_loop *loop = ev_default_loop (0);	46	struct ev_loop *loop = ev_default_loop (0);
36		47
37	/* initialise an io watcher, then start it */	48	// initialise an io watcher, then start it
		49	// this one will watch for stdin to become readable
38	ev_io_init (&stdin_watcher, stdin_cb, /STDIN_FILENO/ 0, EV_READ);	50	ev_io_init (&stdin_watcher, stdin_cb, /STDIN_FILENO/ 0, EV_READ);
39	ev_io_start (loop, &stdin_watcher);	51	ev_io_start (loop, &stdin_watcher);
40		52
		53	// initialise a timer watcher, then start it
41	/* simple non-repeating 5.5 second timeout */	54	// simple non-repeating 5.5 second timeout
42	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	55	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
43	ev_timer_start (loop, &timeout_watcher);	56	ev_timer_start (loop, &timeout_watcher);
44		57
45	/* loop till timeout or data ready */	58	// now wait for events to arrive
46	ev_loop (loop, 0);	59	ev_loop (loop, 0);
47		60
		61	// unloop was called, so exit
48	return 0;	62	return 0;
49	}	63	}
50		64
51	=head1 DESCRIPTION	65	=head1 DESCRIPTION
52		66
53	The newest version of this document is also available as a html-formatted	67	The newest version of this document is also available as an html-formatted
54	web page you might find easier to navigate when reading it for the first	68	web page you might find easier to navigate when reading it for the first
55	time: L<http://cvs.schmorp.de/libev/ev.html>.	69	time: L<http://cvs.schmorp.de/libev/ev.html>.
56		70
57	Libev is an event loop: you register interest in certain events (such as a	71	Libev is an event loop: you register interest in certain events (such as a
58	file descriptor being readable or a timeout occurring), and it will manage	72	file descriptor being readable or a timeout occurring), and it will manage
…		…
65	You register interest in certain events by registering so-called I<event	79	You register interest in certain events by registering so-called I<event
66	watchers>, which are relatively small C structures you initialise with the	80	watchers>, which are relatively small C structures you initialise with the
67	details of the event, and then hand it over to libev by I<starting> the	81	details of the event, and then hand it over to libev by I<starting> the
68	watcher.	82	watcher.
69		83
70	=head1 FEATURES	84	=head2 FEATURES
71		85
72	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	86	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
73	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	87	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
74	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	88	for file descriptor events (C<ev_io>), the Linux C<inotify> interface
75	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers	89	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers
…		…
82		96
83	It also is quite fast (see this	97	It also is quite fast (see this
84	L<benchmark\|http://libev.schmorp.de/bench.html> comparing it to libevent	98	L<benchmark\|http://libev.schmorp.de/bench.html> comparing it to libevent
85	for example).	99	for example).
86		100
87	=head1 CONVENTIONS	101	=head2 CONVENTIONS
88		102
89	Libev is very configurable. In this manual the default configuration will	103	Libev is very configurable. In this manual the default (and most common)
90	be described, which supports multiple event loops. For more info about	104	configuration will be described, which supports multiple event loops. For
91	various configuration options please have a look at B<EMBED> section in	105	more info about various configuration options please have a look at
92	this manual. If libev was configured without support for multiple event	106	B<EMBED> section in this manual. If libev was configured without support
93	loops, then all functions taking an initial argument of name C<loop>	107	for multiple event loops, then all functions taking an initial argument of
94	(which is always of type C<struct ev_loop *>) will not have this argument.	108	name C<loop> (which is always of type C<struct ev_loop *>) will not have
		109	this argument.
95		110
96	=head1 TIME REPRESENTATION	111	=head2 TIME REPRESENTATION
97		112
98	Libev represents time as a single floating point number, representing the	113	Libev represents time as a single floating point number, representing the
99	(fractional) number of seconds since the (POSIX) epoch (somewhere near	114	(fractional) number of seconds since the (POSIX) epoch (somewhere near
100	the beginning of 1970, details are complicated, don't ask). This type is	115	the beginning of 1970, details are complicated, don't ask). This type is
101	called C<ev_tstamp>, which is what you should use too. It usually aliases	116	called C<ev_tstamp>, which is what you should use too. It usually aliases
…		…
260	flags. If that is troubling you, check C<ev_backend ()> afterwards).	275	flags. If that is troubling you, check C<ev_backend ()> afterwards).
261		276
262	If you don't know what event loop to use, use the one returned from this	277	If you don't know what event loop to use, use the one returned from this
263	function.	278	function.
264		279
		280	The default loop is the only loop that can handle C<ev_signal> and
		281	C<ev_child> watchers, and to do this, it always registers a handler
		282	for C<SIGCHLD>. If this is a problem for your app you can either
		283	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you
		284	can simply overwrite the C<SIGCHLD> signal handler I<after> calling
		285	C<ev_default_init>.
		286
265	The flags argument can be used to specify special behaviour or specific	287	The flags argument can be used to specify special behaviour or specific
266	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	288	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
267		289
268	The following flags are supported:	290	The following flags are supported:
269		291
…		…
290	enabling this flag.	312	enabling this flag.
291		313
292	This works by calling C<getpid ()> on every iteration of the loop,	314	This works by calling C<getpid ()> on every iteration of the loop,
293	and thus this might slow down your event loop if you do a lot of loop	315	and thus this might slow down your event loop if you do a lot of loop
294	iterations and little real work, but is usually not noticeable (on my	316	iterations and little real work, but is usually not noticeable (on my
295	Linux system for example, C<getpid> is actually a simple 5-insn sequence	317	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence
296	without a syscall and thus I<very> fast, but my Linux system also has	318	without a syscall and thus I<very> fast, but my GNU/Linux system also has
297	C<pthread_atfork> which is even faster).	319	C<pthread_atfork> which is even faster).
298		320
299	The big advantage of this flag is that you can forget about fork (and	321	The big advantage of this flag is that you can forget about fork (and
300	forget about forgetting to tell libev about forking) when you use this	322	forget about forgetting to tell libev about forking) when you use this
301	flag.	323	flag.
…		…
306	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	328	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
307		329
308	This is your standard select(2) backend. Not I<completely> standard, as	330	This is your standard select(2) backend. Not I<completely> standard, as
309	libev tries to roll its own fd_set with no limits on the number of fds,	331	libev tries to roll its own fd_set with no limits on the number of fds,
310	but if that fails, expect a fairly low limit on the number of fds when	332	but if that fails, expect a fairly low limit on the number of fds when
311	using this backend. It doesn't scale too well (O(highest_fd)), but its usually	333	using this backend. It doesn't scale too well (O(highest_fd)), but its
312	the fastest backend for a low number of fds.	334	usually the fastest backend for a low number of (low-numbered :) fds.
		335
		336	To get good performance out of this backend you need a high amount of
		337	parallelity (most of the file descriptors should be busy). If you are
		338	writing a server, you should C<accept ()> in a loop to accept as many
		339	connections as possible during one iteration. You might also want to have
		340	a look at C<ev_set_io_collect_interval ()> to increase the amount of
		341	readyness notifications you get per iteration.
313		342
314	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)	343	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)
315		344
316	And this is your standard poll(2) backend. It's more complicated than	345	And this is your standard poll(2) backend. It's more complicated
317	select, but handles sparse fds better and has no artificial limit on the	346	than select, but handles sparse fds better and has no artificial
318	number of fds you can use (except it will slow down considerably with a	347	limit on the number of fds you can use (except it will slow down
319	lot of inactive fds). It scales similarly to select, i.e. O(total_fds).	348	considerably with a lot of inactive fds). It scales similarly to select,
		349	i.e. O(total_fds). See the entry for C<EVBACKEND_SELECT>, above, for
		350	performance tips.
320		351
321	=item C<EVBACKEND_EPOLL> (value 4, Linux)	352	=item C<EVBACKEND_EPOLL> (value 4, Linux)
322		353
323	For few fds, this backend is a bit little slower than poll and select,	354	For few fds, this backend is a bit little slower than poll and select,
324	but it scales phenomenally better. While poll and select usually scale	355	but it scales phenomenally better. While poll and select usually scale
325	like O(total_fds) where n is the total number of fds (or the highest fd),	356	like O(total_fds) where n is the total number of fds (or the highest fd),
326	epoll scales either O(1) or O(active_fds). The epoll design has a number	357	epoll scales either O(1) or O(active_fds). The epoll design has a number
327	of shortcomings, such as silently dropping events in some hard-to-detect	358	of shortcomings, such as silently dropping events in some hard-to-detect
328	cases and rewiring a syscall per fd change, no fork support and bad	359	cases and rewiring a syscall per fd change, no fork support and bad
329	support for dup:	360	support for dup.
330		361
331	While stopping, setting and starting an I/O watcher in the same iteration	362	While stopping, setting and starting an I/O watcher in the same iteration
332	will result in some caching, there is still a syscall per such incident	363	will result in some caching, there is still a syscall per such incident
333	(because the fd could point to a different file description now), so its	364	(because the fd could point to a different file description now), so its
334	best to avoid that. Also, C<dup ()>'ed file descriptors might not work	365	best to avoid that. Also, C<dup ()>'ed file descriptors might not work
…		…
336		367
337	Please note that epoll sometimes generates spurious notifications, so you	368	Please note that epoll sometimes generates spurious notifications, so you
338	need to use non-blocking I/O or other means to avoid blocking when no data	369	need to use non-blocking I/O or other means to avoid blocking when no data
339	(or space) is available.	370	(or space) is available.
340		371
		372	Best performance from this backend is achieved by not unregistering all
		373	watchers for a file descriptor until it has been closed, if possible, i.e.
		374	keep at least one watcher active per fd at all times.
		375
		376	While nominally embeddeble in other event loops, this feature is broken in
		377	all kernel versions tested so far.
		378
341	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	379	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
342		380
343	Kqueue deserves special mention, as at the time of this writing, it	381	Kqueue deserves special mention, as at the time of this writing, it
344	was broken on I<all> BSDs (usually it doesn't work with anything but	382	was broken on all BSDs except NetBSD (usually it doesn't work reliably
345	sockets and pipes, except on Darwin, where of course it's completely	383	with anything but sockets and pipes, except on Darwin, where of course
346	useless. On NetBSD, it seems to work for all the FD types I tested, so it
347	is used by default there). For this reason it's not being "autodetected"	384	it's completely useless). For this reason it's not being "autodetected"
348	unless you explicitly specify it explicitly in the flags (i.e. using	385	unless you explicitly specify it explicitly in the flags (i.e. using
349	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)	386	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)
350	system like NetBSD.	387	system like NetBSD.
351		388
		389	You still can embed kqueue into a normal poll or select backend and use it
		390	only for sockets (after having made sure that sockets work with kqueue on
		391	the target platform). See C<ev_embed> watchers for more info.
		392
352	It scales in the same way as the epoll backend, but the interface to the	393	It scales in the same way as the epoll backend, but the interface to the
353	kernel is more efficient (which says nothing about its actual speed,	394	kernel is more efficient (which says nothing about its actual speed, of
354	of course). While stopping, setting and starting an I/O watcher does	395	course). While stopping, setting and starting an I/O watcher does never
355	never cause an extra syscall as with epoll, it still adds up to two event	396	cause an extra syscall as with C<EVBACKEND_EPOLL>, it still adds up to
356	changes per incident, support for C<fork ()> is very bad and it drops fds	397	two event changes per incident, support for C<fork ()> is very bad and it
357	silently in similarly hard-to-detetc cases.	398	drops fds silently in similarly hard-to-detect cases.
		399
		400	This backend usually performs well under most conditions.
		401
		402	While nominally embeddable in other event loops, this doesn't work
		403	everywhere, so you might need to test for this. And since it is broken
		404	almost everywhere, you should only use it when you have a lot of sockets
		405	(for which it usually works), by embedding it into another event loop
		406	(e.g. C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>) and using it only for
		407	sockets.
358		408
359	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)	409	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)
360		410
361	This is not implemented yet (and might never be).	411	This is not implemented yet (and might never be, unless you send me an
		412	implementation). According to reports, C</dev/poll> only supports sockets
		413	and is not embeddable, which would limit the usefulness of this backend
		414	immensely.
362		415
363	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	416	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
364		417
365	This uses the Solaris 10 event port mechanism. As with everything on Solaris,	418	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
366	it's really slow, but it still scales very well (O(active_fds)).	419	it's really slow, but it still scales very well (O(active_fds)).
367		420
368	Please note that solaris event ports can deliver a lot of spurious	421	Please note that solaris event ports can deliver a lot of spurious
369	notifications, so you need to use non-blocking I/O or other means to avoid	422	notifications, so you need to use non-blocking I/O or other means to avoid
370	blocking when no data (or space) is available.	423	blocking when no data (or space) is available.
371		424
		425	While this backend scales well, it requires one system call per active
		426	file descriptor per loop iteration. For small and medium numbers of file
		427	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
		428	might perform better.
		429
		430	On the positive side, ignoring the spurious readyness notifications, this
		431	backend actually performed to specification in all tests and is fully
		432	embeddable, which is a rare feat among the OS-specific backends.
		433
372	=item C<EVBACKEND_ALL>	434	=item C<EVBACKEND_ALL>
373		435
374	Try all backends (even potentially broken ones that wouldn't be tried	436	Try all backends (even potentially broken ones that wouldn't be tried
375	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	437	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
376	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	438	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
377		439
		440	It is definitely not recommended to use this flag.
		441
378	=back	442	=back
379		443
380	If one or more of these are ored into the flags value, then only these	444	If one or more of these are ored into the flags value, then only these
381	backends will be tried (in the reverse order as given here). If none are	445	backends will be tried (in the reverse order as listed here). If none are
382	specified, most compiled-in backend will be tried, usually in reverse	446	specified, all backends in C<ev_recommended_backends ()> will be tried.
383	order of their flag values :)
384		447
385	The most typical usage is like this:	448	The most typical usage is like this:
386		449
387	if (!ev_default_loop (0))	450	if (!ev_default_loop (0))
388	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");	451	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
…		…
435	Like C<ev_default_destroy>, but destroys an event loop created by an	498	Like C<ev_default_destroy>, but destroys an event loop created by an
436	earlier call to C<ev_loop_new>.	499	earlier call to C<ev_loop_new>.
437		500
438	=item ev_default_fork ()	501	=item ev_default_fork ()
439		502
		503	This function sets a flag that causes subsequent C<ev_loop> iterations
440	This function reinitialises the kernel state for backends that have	504	to reinitialise the kernel state for backends that have one. Despite the
441	one. Despite the name, you can call it anytime, but it makes most sense	505	name, you can call it anytime, but it makes most sense after forking, in
442	after forking, in either the parent or child process (or both, but that	506	the child process (or both child and parent, but that again makes little
443	again makes little sense).	507	sense). You I<must> call it in the child before using any of the libev
		508	functions, and it will only take effect at the next C<ev_loop> iteration.
444		509
445	You I<must> call this function in the child process after forking if and	510	On the other hand, you only need to call this function in the child
446	only if you want to use the event library in both processes. If you just	511	process if and only if you want to use the event library in the child. If
447	fork+exec, you don't have to call it.	512	you just fork+exec, you don't have to call it at all.
448		513
449	The function itself is quite fast and it's usually not a problem to call	514	The function itself is quite fast and it's usually not a problem to call
450	it just in case after a fork. To make this easy, the function will fit in	515	it just in case after a fork. To make this easy, the function will fit in
451	quite nicely into a call to C<pthread_atfork>:	516	quite nicely into a call to C<pthread_atfork>:
452		517
453	pthread_atfork (0, 0, ev_default_fork);	518	pthread_atfork (0, 0, ev_default_fork);
454		519
455	At the moment, C<EVBACKEND_SELECT> and C<EVBACKEND_POLL> are safe to use
456	without calling this function, so if you force one of those backends you
457	do not need to care.
458
459	=item ev_loop_fork (loop)	520	=item ev_loop_fork (loop)
460		521
461	Like C<ev_default_fork>, but acts on an event loop created by	522	Like C<ev_default_fork>, but acts on an event loop created by
462	C<ev_loop_new>. Yes, you have to call this on every allocated event loop	523	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
463	after fork, and how you do this is entirely your own problem.	524	after fork, and how you do this is entirely your own problem.
		525
		526	=item int ev_is_default_loop (loop)
		527
		528	Returns true when the given loop actually is the default loop, false otherwise.
464		529
465	=item unsigned int ev_loop_count (loop)	530	=item unsigned int ev_loop_count (loop)
466		531
467	Returns the count of loop iterations for the loop, which is identical to	532	Returns the count of loop iterations for the loop, which is identical to
468	the number of times libev did poll for new events. It starts at C<0> and	533	the number of times libev did poll for new events. It starts at C<0> and
…		…
513	usually a better approach for this kind of thing.	578	usually a better approach for this kind of thing.
514		579
515	Here are the gory details of what C<ev_loop> does:	580	Here are the gory details of what C<ev_loop> does:
516		581
517	- Before the first iteration, call any pending watchers.	582	- Before the first iteration, call any pending watchers.
518	* If there are no active watchers (reference count is zero), return.	583	* If EVFLAG_FORKCHECK was used, check for a fork.
519	- Queue all prepare watchers and then call all outstanding watchers.	584	- If a fork was detected, queue and call all fork watchers.
		585	- Queue and call all prepare watchers.
520	- If we have been forked, recreate the kernel state.	586	- If we have been forked, recreate the kernel state.
521	- Update the kernel state with all outstanding changes.	587	- Update the kernel state with all outstanding changes.
522	- Update the "event loop time".	588	- Update the "event loop time".
523	- Calculate for how long to block.	589	- Calculate for how long to sleep or block, if at all
		590	(active idle watchers, EVLOOP_NONBLOCK or not having
		591	any active watchers at all will result in not sleeping).
		592	- Sleep if the I/O and timer collect interval say so.
524	- Block the process, waiting for any events.	593	- Block the process, waiting for any events.
525	- Queue all outstanding I/O (fd) events.	594	- Queue all outstanding I/O (fd) events.
526	- Update the "event loop time" and do time jump handling.	595	- Update the "event loop time" and do time jump handling.
527	- Queue all outstanding timers.	596	- Queue all outstanding timers.
528	- Queue all outstanding periodics.	597	- Queue all outstanding periodics.
529	- If no events are pending now, queue all idle watchers.	598	- If no events are pending now, queue all idle watchers.
530	- Queue all check watchers.	599	- Queue all check watchers.
531	- Call all queued watchers in reverse order (i.e. check watchers first).	600	- Call all queued watchers in reverse order (i.e. check watchers first).
532	Signals and child watchers are implemented as I/O watchers, and will	601	Signals and child watchers are implemented as I/O watchers, and will
533	be handled here by queueing them when their watcher gets executed.	602	be handled here by queueing them when their watcher gets executed.
534	- If ev_unloop has been called or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	603	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK
535	were used, return, otherwise continue with step *.	604	were used, or there are no active watchers, return, otherwise
		605	continue with step *.
536		606
537	Example: Queue some jobs and then loop until no events are outsanding	607	Example: Queue some jobs and then loop until no events are outstanding
538	anymore.	608	anymore.
539		609
540	... queue jobs here, make sure they register event watchers as long	610	... queue jobs here, make sure they register event watchers as long
541	... as they still have work to do (even an idle watcher will do..)	611	... as they still have work to do (even an idle watcher will do..)
542	ev_loop (my_loop, 0);	612	ev_loop (my_loop, 0);
…		…
546		616
547	Can be used to make a call to C<ev_loop> return early (but only after it	617	Can be used to make a call to C<ev_loop> return early (but only after it
548	has processed all outstanding events). The C<how> argument must be either	618	has processed all outstanding events). The C<how> argument must be either
549	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	619	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or
550	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	620	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.
		621
		622	This "unloop state" will be cleared when entering C<ev_loop> again.
551		623
552	=item ev_ref (loop)	624	=item ev_ref (loop)
553		625
554	=item ev_unref (loop)	626	=item ev_unref (loop)
555		627
…		…
560	returning, ev_unref() after starting, and ev_ref() before stopping it. For	632	returning, ev_unref() after starting, and ev_ref() before stopping it. For
561	example, libev itself uses this for its internal signal pipe: It is not	633	example, libev itself uses this for its internal signal pipe: It is not
562	visible to the libev user and should not keep C<ev_loop> from exiting if	634	visible to the libev user and should not keep C<ev_loop> from exiting if
563	no event watchers registered by it are active. It is also an excellent	635	no event watchers registered by it are active. It is also an excellent
564	way to do this for generic recurring timers or from within third-party	636	way to do this for generic recurring timers or from within third-party
565	libraries. Just remember to I<unref after start> and I<ref before stop>.	637	libraries. Just remember to I<unref after start> and I<ref before stop>
		638	(but only if the watcher wasn't active before, or was active before,
		639	respectively).
566		640
567	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	641	Example: Create a signal watcher, but keep it from keeping C<ev_loop>
568	running when nothing else is active.	642	running when nothing else is active.
569		643
570	struct ev_signal exitsig;	644	struct ev_signal exitsig;
…		…
596	overhead for the actual polling but can deliver many events at once.	670	overhead for the actual polling but can deliver many events at once.
597		671
598	By setting a higher I<io collect interval> you allow libev to spend more	672	By setting a higher I<io collect interval> you allow libev to spend more
599	time collecting I/O events, so you can handle more events per iteration,	673	time collecting I/O events, so you can handle more events per iteration,
600	at the cost of increasing latency. Timeouts (both C<ev_periodic> and	674	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
601	C<ev_timer>) will be not affected.	675	C<ev_timer>) will be not affected. Setting this to a non-null value will
		676	introduce an additional C<ev_sleep ()> call into most loop iterations.
602		677
603	Likewise, by setting a higher I<timeout collect interval> you allow libev	678	Likewise, by setting a higher I<timeout collect interval> you allow libev
604	to spend more time collecting timeouts, at the expense of increased	679	to spend more time collecting timeouts, at the expense of increased
605	latency (the watcher callback will be called later). C<ev_io> watchers	680	latency (the watcher callback will be called later). C<ev_io> watchers
606	will not be affected.	681	will not be affected. Setting this to a non-null value will not introduce
		682	any overhead in libev.
607		683
608	Many programs can usually benefit by setting the io collect interval to	684	Many (busy) programs can usually benefit by setting the io collect
609	a value near C<0.1> or so, which is often enough for interactive servers	685	interval to a value near C<0.1> or so, which is often enough for
610	(of course not for games), likewise for timeouts. It usually doesn't make	686	interactive servers (of course not for games), likewise for timeouts. It
611	much sense to set it to a lower value than C<0.01>, as this approsaches	687	usually doesn't make much sense to set it to a lower value than C<0.01>,
612	the timing granularity of most systems.	688	as this approsaches the timing granularity of most systems.
613		689
614	=back	690	=back
615		691
616		692
617	=head1 ANATOMY OF A WATCHER	693	=head1 ANATOMY OF A WATCHER
…		…
716		792
717	=item C<EV_FORK>	793	=item C<EV_FORK>
718		794
719	The event loop has been resumed in the child process after fork (see	795	The event loop has been resumed in the child process after fork (see
720	C<ev_fork>).	796	C<ev_fork>).
		797
		798	=item C<EV_ASYNC>
		799
		800	The given async watcher has been asynchronously notified (see C<ev_async>).
721		801
722	=item C<EV_ERROR>	802	=item C<EV_ERROR>
723		803
724	An unspecified error has occured, the watcher has been stopped. This might	804	An unspecified error has occured, the watcher has been stopped. This might
725	happen because the watcher could not be properly started because libev	805	happen because the watcher could not be properly started because libev
…		…
943	In general you can register as many read and/or write event watchers per	1023	In general you can register as many read and/or write event watchers per
944	fd as you want (as long as you don't confuse yourself). Setting all file	1024	fd as you want (as long as you don't confuse yourself). Setting all file
945	descriptors to non-blocking mode is also usually a good idea (but not	1025	descriptors to non-blocking mode is also usually a good idea (but not
946	required if you know what you are doing).	1026	required if you know what you are doing).
947		1027
948	You have to be careful with dup'ed file descriptors, though. Some backends
949	(the linux epoll backend is a notable example) cannot handle dup'ed file
950	descriptors correctly if you register interest in two or more fds pointing
951	to the same underlying file/socket/etc. description (that is, they share
952	the same underlying "file open").
953
954	If you must do this, then force the use of a known-to-be-good backend	1028	If you must do this, then force the use of a known-to-be-good backend
955	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and	1029	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and
956	C<EVBACKEND_POLL>).	1030	C<EVBACKEND_POLL>).
957		1031
958	Another thing you have to watch out for is that it is quite easy to	1032	Another thing you have to watch out for is that it is quite easy to
…		…
992	optimisations to libev.	1066	optimisations to libev.
993		1067
994	=head3 The special problem of dup'ed file descriptors	1068	=head3 The special problem of dup'ed file descriptors
995		1069
996	Some backends (e.g. epoll), cannot register events for file descriptors,	1070	Some backends (e.g. epoll), cannot register events for file descriptors,
997	but only events for the underlying file descriptions. That menas when you	1071	but only events for the underlying file descriptions. That means when you
998	have C<dup ()>'ed file descriptors and register events for them, only one	1072	have C<dup ()>'ed file descriptors or weirder constellations, and register
999	file descriptor might actually receive events.	1073	events for them, only one file descriptor might actually receive events.
1000		1074
1001	There is no workaorund possible except not registering events	1075	There is no workaround possible except not registering events
1002	for potentially C<dup ()>'ed file descriptors or to resort to	1076	for potentially C<dup ()>'ed file descriptors, or to resort to
1003	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.	1077	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1004		1078
1005	=head3 The special problem of fork	1079	=head3 The special problem of fork
1006		1080
1007	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit	1081	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit
…		…
1011	To support fork in your programs, you either have to call	1085	To support fork in your programs, you either have to call
1012	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,	1086	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,
1013	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or	1087	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or
1014	C<EVBACKEND_POLL>.	1088	C<EVBACKEND_POLL>.
1015		1089
		1090	=head3 The special problem of SIGPIPE
		1091
		1092	While not really specific to libev, it is easy to forget about SIGPIPE:
		1093	when reading from a pipe whose other end has been closed, your program
		1094	gets send a SIGPIPE, which, by default, aborts your program. For most
		1095	programs this is sensible behaviour, for daemons, this is usually
		1096	undesirable.
		1097
		1098	So when you encounter spurious, unexplained daemon exits, make sure you
		1099	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
		1100	somewhere, as that would have given you a big clue).
		1101
1016		1102
1017	=head3 Watcher-Specific Functions	1103	=head3 Watcher-Specific Functions
1018		1104
1019	=over 4	1105	=over 4
1020		1106
…		…
1033	=item int events [read-only]	1119	=item int events [read-only]
1034		1120
1035	The events being watched.	1121	The events being watched.
1036		1122
1037	=back	1123	=back
		1124
		1125	=head3 Examples
1038		1126
1039	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well	1127	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well
1040	readable, but only once. Since it is likely line-buffered, you could	1128	readable, but only once. Since it is likely line-buffered, you could
1041	attempt to read a whole line in the callback.	1129	attempt to read a whole line in the callback.
1042		1130
…		…
1095	configure a timer to trigger every 10 seconds, then it will trigger at	1183	configure a timer to trigger every 10 seconds, then it will trigger at
1096	exactly 10 second intervals. If, however, your program cannot keep up with	1184	exactly 10 second intervals. If, however, your program cannot keep up with
1097	the timer (because it takes longer than those 10 seconds to do stuff) the	1185	the timer (because it takes longer than those 10 seconds to do stuff) the
1098	timer will not fire more than once per event loop iteration.	1186	timer will not fire more than once per event loop iteration.
1099		1187
1100	=item ev_timer_again (loop)	1188	=item ev_timer_again (loop, ev_timer *)
1101		1189
1102	This will act as if the timer timed out and restart it again if it is	1190	This will act as if the timer timed out and restart it again if it is
1103	repeating. The exact semantics are:	1191	repeating. The exact semantics are:
1104		1192
1105	If the timer is pending, its pending status is cleared.	1193	If the timer is pending, its pending status is cleared.
…		…
1140	or C<ev_timer_again> is called and determines the next timeout (if any),	1228	or C<ev_timer_again> is called and determines the next timeout (if any),
1141	which is also when any modifications are taken into account.	1229	which is also when any modifications are taken into account.
1142		1230
1143	=back	1231	=back
1144		1232
		1233	=head3 Examples
		1234
1145	Example: Create a timer that fires after 60 seconds.	1235	Example: Create a timer that fires after 60 seconds.
1146		1236
1147	static void	1237	static void
1148	one_minute_cb (struct ev_loop loop, struct ev_timer w, int revents)	1238	one_minute_cb (struct ev_loop loop, struct ev_timer w, int revents)
1149	{	1239	{
…		…
1212	In this configuration the watcher triggers an event at the wallclock time	1302	In this configuration the watcher triggers an event at the wallclock time
1213	C<at> and doesn't repeat. It will not adjust when a time jump occurs,	1303	C<at> and doesn't repeat. It will not adjust when a time jump occurs,
1214	that is, if it is to be run at January 1st 2011 then it will run when the	1304	that is, if it is to be run at January 1st 2011 then it will run when the
1215	system time reaches or surpasses this time.	1305	system time reaches or surpasses this time.
1216		1306
1217	=item * non-repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)	1307	=item * repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)
1218		1308
1219	In this mode the watcher will always be scheduled to time out at the next	1309	In this mode the watcher will always be scheduled to time out at the next
1220	C<at + N * interval> time (for some integer N, which can also be negative)	1310	C<at + N * interval> time (for some integer N, which can also be negative)
1221	and then repeat, regardless of any time jumps.	1311	and then repeat, regardless of any time jumps.
1222		1312
…		…
1305		1395
1306	When active, contains the absolute time that the watcher is supposed to	1396	When active, contains the absolute time that the watcher is supposed to
1307	trigger next.	1397	trigger next.
1308		1398
1309	=back	1399	=back
		1400
		1401	=head3 Examples
1310		1402
1311	Example: Call a callback every hour, or, more precisely, whenever the	1403	Example: Call a callback every hour, or, more precisely, whenever the
1312	system clock is divisible by 3600. The callback invocation times have	1404	system clock is divisible by 3600. The callback invocation times have
1313	potentially a lot of jittering, but good long-term stability.	1405	potentially a lot of jittering, but good long-term stability.
1314		1406
…		…
1354	with the kernel (thus it coexists with your own signal handlers as long	1446	with the kernel (thus it coexists with your own signal handlers as long
1355	as you don't register any with libev). Similarly, when the last signal	1447	as you don't register any with libev). Similarly, when the last signal
1356	watcher for a signal is stopped libev will reset the signal handler to	1448	watcher for a signal is stopped libev will reset the signal handler to
1357	SIG_DFL (regardless of what it was set to before).	1449	SIG_DFL (regardless of what it was set to before).
1358		1450
		1451	If possible and supported, libev will install its handlers with
		1452	C<SA_RESTART> behaviour enabled, so syscalls should not be unduly
		1453	interrupted. If you have a problem with syscalls getting interrupted by
		1454	signals you can block all signals in an C<ev_check> watcher and unblock
		1455	them in an C<ev_prepare> watcher.
		1456
1359	=head3 Watcher-Specific Functions and Data Members	1457	=head3 Watcher-Specific Functions and Data Members
1360		1458
1361	=over 4	1459	=over 4
1362		1460
1363	=item ev_signal_init (ev_signal *, callback, int signum)	1461	=item ev_signal_init (ev_signal *, callback, int signum)
…		…
1371		1469
1372	The signal the watcher watches out for.	1470	The signal the watcher watches out for.
1373		1471
1374	=back	1472	=back
1375		1473
		1474	=head3 Examples
		1475
		1476	Example: Try to exit cleanly on SIGINT and SIGTERM.
		1477
		1478	static void
		1479	sigint_cb (struct ev_loop loop, struct ev_signal w, int revents)
		1480	{
		1481	ev_unloop (loop, EVUNLOOP_ALL);
		1482	}
		1483
		1484	struct ev_signal signal_watcher;
		1485	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
		1486	ev_signal_start (loop, &sigint_cb);
		1487
1376		1488
1377	=head2 C<ev_child> - watch out for process status changes	1489	=head2 C<ev_child> - watch out for process status changes
1378		1490
1379	Child watchers trigger when your process receives a SIGCHLD in response to	1491	Child watchers trigger when your process receives a SIGCHLD in response to
1380	some child status changes (most typically when a child of yours dies).	1492	some child status changes (most typically when a child of yours dies). It
		1493	is permissible to install a child watcher I<after> the child has been
		1494	forked (which implies it might have already exited), as long as the event
		1495	loop isn't entered (or is continued from a watcher).
		1496
		1497	Only the default event loop is capable of handling signals, and therefore
		1498	you can only rgeister child watchers in the default event loop.
		1499
		1500	=head3 Process Interaction
		1501
		1502	Libev grabs C<SIGCHLD> as soon as the default event loop is
		1503	initialised. This is necessary to guarantee proper behaviour even if
		1504	the first child watcher is started after the child exits. The occurance
		1505	of C<SIGCHLD> is recorded asynchronously, but child reaping is done
		1506	synchronously as part of the event loop processing. Libev always reaps all
		1507	children, even ones not watched.
		1508
		1509	=head3 Overriding the Built-In Processing
		1510
		1511	Libev offers no special support for overriding the built-in child
		1512	processing, but if your application collides with libev's default child
		1513	handler, you can override it easily by installing your own handler for
		1514	C<SIGCHLD> after initialising the default loop, and making sure the
		1515	default loop never gets destroyed. You are encouraged, however, to use an
		1516	event-based approach to child reaping and thus use libev's support for
		1517	that, so other libev users can use C<ev_child> watchers freely.
1381		1518
1382	=head3 Watcher-Specific Functions and Data Members	1519	=head3 Watcher-Specific Functions and Data Members
1383		1520
1384	=over 4	1521	=over 4
1385		1522
1386	=item ev_child_init (ev_child *, callback, int pid)	1523	=item ev_child_init (ev_child *, callback, int pid, int trace)
1387		1524
1388	=item ev_child_set (ev_child *, int pid)	1525	=item ev_child_set (ev_child *, int pid, int trace)
1389		1526
1390	Configures the watcher to wait for status changes of process C<pid> (or	1527	Configures the watcher to wait for status changes of process C<pid> (or
1391	I<any> process if C<pid> is specified as C<0>). The callback can look	1528	I<any> process if C<pid> is specified as C<0>). The callback can look
1392	at the C<rstatus> member of the C<ev_child> watcher structure to see	1529	at the C<rstatus> member of the C<ev_child> watcher structure to see
1393	the status word (use the macros from C<sys/wait.h> and see your systems	1530	the status word (use the macros from C<sys/wait.h> and see your systems
1394	C<waitpid> documentation). The C<rpid> member contains the pid of the	1531	C<waitpid> documentation). The C<rpid> member contains the pid of the
1395	process causing the status change.	1532	process causing the status change. C<trace> must be either C<0> (only
		1533	activate the watcher when the process terminates) or C<1> (additionally
		1534	activate the watcher when the process is stopped or continued).
1396		1535
1397	=item int pid [read-only]	1536	=item int pid [read-only]
1398		1537
1399	The process id this watcher watches out for, or C<0>, meaning any process id.	1538	The process id this watcher watches out for, or C<0>, meaning any process id.
1400		1539
…		…
1407	The process exit/trace status caused by C<rpid> (see your systems	1546	The process exit/trace status caused by C<rpid> (see your systems
1408	C<waitpid> and C<sys/wait.h> documentation for details).	1547	C<waitpid> and C<sys/wait.h> documentation for details).
1409		1548
1410	=back	1549	=back
1411		1550
1412	Example: Try to exit cleanly on SIGINT and SIGTERM.	1551	=head3 Examples
		1552
		1553	Example: C<fork()> a new process and install a child handler to wait for
		1554	its completion.
		1555
		1556	ev_child cw;
1413		1557
1414	static void	1558	static void
1415	sigint_cb (struct ev_loop loop, struct ev_signal w, int revents)	1559	child_cb (EV_P_ struct ev_child *w, int revents)
1416	{	1560	{
1417	ev_unloop (loop, EVUNLOOP_ALL);	1561	ev_child_stop (EV_A_ w);
		1562	printf ("process %d exited with status %x\n", w->rpid, w->rstatus);
1418	}	1563	}
1419		1564
1420	struct ev_signal signal_watcher;	1565	pid_t pid = fork ();
1421	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	1566
1422	ev_signal_start (loop, &sigint_cb);	1567	if (pid < 0)
		1568	// error
		1569	else if (pid == 0)
		1570	{
		1571	// the forked child executes here
		1572	exit (1);
		1573	}
		1574	else
		1575	{
		1576	ev_child_init (&cw, child_cb, pid, 0);
		1577	ev_child_start (EV_DEFAULT_ &cw);
		1578	}
1423		1579
1424		1580
1425	=head2 C<ev_stat> - did the file attributes just change?	1581	=head2 C<ev_stat> - did the file attributes just change?
1426		1582
1427	This watches a filesystem path for attribute changes. That is, it calls	1583	This watches a filesystem path for attribute changes. That is, it calls
…		…
1456	semantics of C<ev_stat> watchers, which means that libev sometimes needs	1612	semantics of C<ev_stat> watchers, which means that libev sometimes needs
1457	to fall back to regular polling again even with inotify, but changes are	1613	to fall back to regular polling again even with inotify, but changes are
1458	usually detected immediately, and if the file exists there will be no	1614	usually detected immediately, and if the file exists there will be no
1459	polling.	1615	polling.
1460		1616
		1617	=head3 ABI Issues (Largefile Support)
		1618
		1619	Libev by default (unless the user overrides this) uses the default
		1620	compilation environment, which means that on systems with optionally
		1621	disabled large file support, you get the 32 bit version of the stat
		1622	structure. When using the library from programs that change the ABI to
		1623	use 64 bit file offsets the programs will fail. In that case you have to
		1624	compile libev with the same flags to get binary compatibility. This is
		1625	obviously the case with any flags that change the ABI, but the problem is
		1626	most noticably with ev_stat and largefile support.
		1627
		1628	=head3 Inotify
		1629
		1630	When C<inotify (7)> support has been compiled into libev (generally only
		1631	available on Linux) and present at runtime, it will be used to speed up
		1632	change detection where possible. The inotify descriptor will be created lazily
		1633	when the first C<ev_stat> watcher is being started.
		1634
		1635	Inotify presense does not change the semantics of C<ev_stat> watchers
		1636	except that changes might be detected earlier, and in some cases, to avoid
		1637	making regular C<stat> calls. Even in the presense of inotify support
		1638	there are many cases where libev has to resort to regular C<stat> polling.
		1639
		1640	(There is no support for kqueue, as apparently it cannot be used to
		1641	implement this functionality, due to the requirement of having a file
		1642	descriptor open on the object at all times).
		1643
		1644	=head3 The special problem of stat time resolution
		1645
		1646	The C<stat ()> syscall only supports full-second resolution portably, and
		1647	even on systems where the resolution is higher, many filesystems still
		1648	only support whole seconds.
		1649
		1650	That means that, if the time is the only thing that changes, you might
		1651	miss updates: on the first update, C<ev_stat> detects a change and calls
		1652	your callback, which does something. When there is another update within
		1653	the same second, C<ev_stat> will be unable to detect it.
		1654
		1655	The solution to this is to delay acting on a change for a second (or till
		1656	the next second boundary), using a roughly one-second delay C<ev_timer>
		1657	(C<ev_timer_set (w, 0., 1.01); ev_timer_again (loop, w)>). The C<.01>
		1658	is added to work around small timing inconsistencies of some operating
		1659	systems.
		1660
1461	=head3 Watcher-Specific Functions and Data Members	1661	=head3 Watcher-Specific Functions and Data Members
1462		1662
1463	=over 4	1663	=over 4
1464		1664
1465	=item ev_stat_init (ev_stat , callback, const char path, ev_tstamp interval)	1665	=item ev_stat_init (ev_stat , callback, const char path, ev_tstamp interval)
…		…
1474		1674
1475	The callback will be receive C<EV_STAT> when a change was detected,	1675	The callback will be receive C<EV_STAT> when a change was detected,
1476	relative to the attributes at the time the watcher was started (or the	1676	relative to the attributes at the time the watcher was started (or the
1477	last change was detected).	1677	last change was detected).
1478		1678
1479	=item ev_stat_stat (ev_stat *)	1679	=item ev_stat_stat (loop, ev_stat *)
1480		1680
1481	Updates the stat buffer immediately with new values. If you change the	1681	Updates the stat buffer immediately with new values. If you change the
1482	watched path in your callback, you could call this fucntion to avoid	1682	watched path in your callback, you could call this fucntion to avoid
1483	detecting this change (while introducing a race condition). Can also be	1683	detecting this change (while introducing a race condition). Can also be
1484	useful simply to find out the new values.	1684	useful simply to find out the new values.
…		…
1502	=item const char *path [read-only]	1702	=item const char *path [read-only]
1503		1703
1504	The filesystem path that is being watched.	1704	The filesystem path that is being watched.
1505		1705
1506	=back	1706	=back
		1707
		1708	=head3 Examples
1507		1709
1508	Example: Watch C</etc/passwd> for attribute changes.	1710	Example: Watch C</etc/passwd> for attribute changes.
1509		1711
1510	static void	1712	static void
1511	passwd_cb (struct ev_loop loop, ev_stat w, int revents)	1713	passwd_cb (struct ev_loop loop, ev_stat w, int revents)
…		…
1524	}	1726	}
1525		1727
1526	...	1728	...
1527	ev_stat passwd;	1729	ev_stat passwd;
1528		1730
1529	ev_stat_init (&passwd, passwd_cb, "/etc/passwd");	1731	ev_stat_init (&passwd, passwd_cb, "/etc/passwd", 0.);
1530	ev_stat_start (loop, &passwd);	1732	ev_stat_start (loop, &passwd);
		1733
		1734	Example: Like above, but additionally use a one-second delay so we do not
		1735	miss updates (however, frequent updates will delay processing, too, so
		1736	one might do the work both on C<ev_stat> callback invocation I<and> on
		1737	C<ev_timer> callback invocation).
		1738
		1739	static ev_stat passwd;
		1740	static ev_timer timer;
		1741
		1742	static void
		1743	timer_cb (EV_P_ ev_timer *w, int revents)
		1744	{
		1745	ev_timer_stop (EV_A_ w);
		1746
		1747	/* now it's one second after the most recent passwd change */
		1748	}
		1749
		1750	static void
		1751	stat_cb (EV_P_ ev_stat *w, int revents)
		1752	{
		1753	/* reset the one-second timer */
		1754	ev_timer_again (EV_A_ &timer);
		1755	}
		1756
		1757	...
		1758	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);
		1759	ev_stat_start (loop, &passwd);
		1760	ev_timer_init (&timer, timer_cb, 0., 1.01);
1531		1761
1532		1762
1533	=head2 C<ev_idle> - when you've got nothing better to do...	1763	=head2 C<ev_idle> - when you've got nothing better to do...
1534		1764
1535	Idle watchers trigger events when no other events of the same or higher	1765	Idle watchers trigger events when no other events of the same or higher
…		…
1561	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,	1791	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,
1562	believe me.	1792	believe me.
1563		1793
1564	=back	1794	=back
1565		1795
		1796	=head3 Examples
		1797
1566	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the	1798	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the
1567	callback, free it. Also, use no error checking, as usual.	1799	callback, free it. Also, use no error checking, as usual.
1568		1800
1569	static void	1801	static void
1570	idle_cb (struct ev_loop loop, struct ev_idle w, int revents)	1802	idle_cb (struct ev_loop loop, struct ev_idle w, int revents)
1571	{	1803	{
1572	free (w);	1804	free (w);
1573	// now do something you wanted to do when the program has	1805	// now do something you wanted to do when the program has
1574	// no longer asnything immediate to do.	1806	// no longer anything immediate to do.
1575	}	1807	}
1576		1808
1577	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));	1809	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));
1578	ev_idle_init (idle_watcher, idle_cb);	1810	ev_idle_init (idle_watcher, idle_cb);
1579	ev_idle_start (loop, idle_cb);	1811	ev_idle_start (loop, idle_cb);
…		…
1621		1853
1622	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)	1854	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)
1623	priority, to ensure that they are being run before any other watchers	1855	priority, to ensure that they are being run before any other watchers
1624	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,	1856	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,
1625	too) should not activate ("feed") events into libev. While libev fully	1857	too) should not activate ("feed") events into libev. While libev fully
1626	supports this, they will be called before other C<ev_check> watchers did	1858	supports this, they will be called before other C<ev_check> watchers
1627	their job. As C<ev_check> watchers are often used to embed other event	1859	did their job. As C<ev_check> watchers are often used to embed other
1628	loops those other event loops might be in an unusable state until their	1860	(non-libev) event loops those other event loops might be in an unusable
1629	C<ev_check> watcher ran (always remind yourself to coexist peacefully with	1861	state until their C<ev_check> watcher ran (always remind yourself to
1630	others).	1862	coexist peacefully with others).
1631		1863
1632	=head3 Watcher-Specific Functions and Data Members	1864	=head3 Watcher-Specific Functions and Data Members
1633		1865
1634	=over 4	1866	=over 4
1635		1867
…		…
1640	Initialises and configures the prepare or check watcher - they have no	1872	Initialises and configures the prepare or check watcher - they have no
1641	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>	1873	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>
1642	macros, but using them is utterly, utterly and completely pointless.	1874	macros, but using them is utterly, utterly and completely pointless.
1643		1875
1644	=back	1876	=back
		1877
		1878	=head3 Examples
1645		1879
1646	There are a number of principal ways to embed other event loops or modules	1880	There are a number of principal ways to embed other event loops or modules
1647	into libev. Here are some ideas on how to include libadns into libev	1881	into libev. Here are some ideas on how to include libadns into libev
1648	(there is a Perl module named C<EV::ADNS> that does this, which you could	1882	(there is a Perl module named C<EV::ADNS> that does this, which you could
1649	use for an actually working example. Another Perl module named C<EV::Glib>	1883	use for an actually working example. Another Perl module named C<EV::Glib>
…		…
1774	=head2 C<ev_embed> - when one backend isn't enough...	2008	=head2 C<ev_embed> - when one backend isn't enough...
1775		2009
1776	This is a rather advanced watcher type that lets you embed one event loop	2010	This is a rather advanced watcher type that lets you embed one event loop
1777	into another (currently only C<ev_io> events are supported in the embedded	2011	into another (currently only C<ev_io> events are supported in the embedded
1778	loop, other types of watchers might be handled in a delayed or incorrect	2012	loop, other types of watchers might be handled in a delayed or incorrect
1779	fashion and must not be used). (See portability notes, below).	2013	fashion and must not be used).
1780		2014
1781	There are primarily two reasons you would want that: work around bugs and	2015	There are primarily two reasons you would want that: work around bugs and
1782	prioritise I/O.	2016	prioritise I/O.
1783		2017
1784	As an example for a bug workaround, the kqueue backend might only support	2018	As an example for a bug workaround, the kqueue backend might only support
…		…
1818	portable one.	2052	portable one.
1819		2053
1820	So when you want to use this feature you will always have to be prepared	2054	So when you want to use this feature you will always have to be prepared
1821	that you cannot get an embeddable loop. The recommended way to get around	2055	that you cannot get an embeddable loop. The recommended way to get around
1822	this is to have a separate variables for your embeddable loop, try to	2056	this is to have a separate variables for your embeddable loop, try to
1823	create it, and if that fails, use the normal loop for everything:	2057	create it, and if that fails, use the normal loop for everything.
		2058
		2059	=head3 Watcher-Specific Functions and Data Members
		2060
		2061	=over 4
		2062
		2063	=item ev_embed_init (ev_embed , callback, struct ev_loop embedded_loop)
		2064
		2065	=item ev_embed_set (ev_embed , callback, struct ev_loop embedded_loop)
		2066
		2067	Configures the watcher to embed the given loop, which must be
		2068	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
		2069	invoked automatically, otherwise it is the responsibility of the callback
		2070	to invoke it (it will continue to be called until the sweep has been done,
		2071	if you do not want thta, you need to temporarily stop the embed watcher).
		2072
		2073	=item ev_embed_sweep (loop, ev_embed *)
		2074
		2075	Make a single, non-blocking sweep over the embedded loop. This works
		2076	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
		2077	apropriate way for embedded loops.
		2078
		2079	=item struct ev_loop *other [read-only]
		2080
		2081	The embedded event loop.
		2082
		2083	=back
		2084
		2085	=head3 Examples
		2086
		2087	Example: Try to get an embeddable event loop and embed it into the default
		2088	event loop. If that is not possible, use the default loop. The default
		2089	loop is stored in C<loop_hi>, while the mebeddable loop is stored in
		2090	C<loop_lo> (which is C<loop_hi> in the acse no embeddable loop can be
		2091	used).
1824		2092
1825	struct ev_loop *loop_hi = ev_default_init (0);	2093	struct ev_loop *loop_hi = ev_default_init (0);
1826	struct ev_loop *loop_lo = 0;	2094	struct ev_loop *loop_lo = 0;
1827	struct ev_embed embed;	2095	struct ev_embed embed;
1828		2096
…		…
1839	ev_embed_start (loop_hi, &embed);	2107	ev_embed_start (loop_hi, &embed);
1840	}	2108	}
1841	else	2109	else
1842	loop_lo = loop_hi;	2110	loop_lo = loop_hi;
1843		2111
1844	=head2 Portability notes	2112	Example: Check if kqueue is available but not recommended and create
		2113	a kqueue backend for use with sockets (which usually work with any
		2114	kqueue implementation). Store the kqueue/socket-only event loop in
		2115	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
1845		2116
1846	Kqueue is nominally embeddable, but this is broken on all BSDs that I	2117	struct ev_loop *loop = ev_default_init (0);
1847	tried, in various ways. Usually the embedded event loop will simply never	2118	struct ev_loop *loop_socket = 0;
1848	receive events, sometimes it will only trigger a few times, sometimes in a	2119	struct ev_embed embed;
1849	loop. Epoll is also nominally embeddable, but many Linux kernel versions	2120
1850	will always eport the epoll fd as ready, even when no events are pending.	2121	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
		2122	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
		2123	{
		2124	ev_embed_init (&embed, 0, loop_socket);
		2125	ev_embed_start (loop, &embed);
		2126	}
1851		2127
1852	While libev allows embedding these backends (they are contained in	2128	if (!loop_socket)
1853	C<ev_embeddable_backends ()>), take extreme care that it will actually	2129	loop_socket = loop;
1854	work.
1855		2130
1856	When in doubt, create a dynamic event loop forced to use sockets (this	2131	// now use loop_socket for all sockets, and loop for everything else
1857	usually works) and possibly another thread and a pipe or so to report to
1858	your main event loop.
1859
1860	=head3 Watcher-Specific Functions and Data Members
1861
1862	=over 4
1863
1864	=item ev_embed_init (ev_embed , callback, struct ev_loop embedded_loop)
1865
1866	=item ev_embed_set (ev_embed , callback, struct ev_loop embedded_loop)
1867
1868	Configures the watcher to embed the given loop, which must be
1869	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
1870	invoked automatically, otherwise it is the responsibility of the callback
1871	to invoke it (it will continue to be called until the sweep has been done,
1872	if you do not want thta, you need to temporarily stop the embed watcher).
1873
1874	=item ev_embed_sweep (loop, ev_embed *)
1875
1876	Make a single, non-blocking sweep over the embedded loop. This works
1877	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
1878	apropriate way for embedded loops.
1879
1880	=item struct ev_loop *other [read-only]
1881
1882	The embedded event loop.
1883
1884	=back
1885		2132
1886		2133
1887	=head2 C<ev_fork> - the audacity to resume the event loop after a fork	2134	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
1888		2135
1889	Fork watchers are called when a C<fork ()> was detected (usually because	2136	Fork watchers are called when a C<fork ()> was detected (usually because
…		…
1905	believe me.	2152	believe me.
1906		2153
1907	=back	2154	=back
1908		2155
1909		2156
		2157	=head2 C<ev_async> - how to wake up another event loop
		2158
		2159	In general, you cannot use an C<ev_loop> from multiple threads or other
		2160	asynchronous sources such as signal handlers (as opposed to multiple event
		2161	loops - those are of course safe to use in different threads).
		2162
		2163	Sometimes, however, you need to wake up another event loop you do not
		2164	control, for example because it belongs to another thread. This is what
		2165	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you
		2166	can signal it by calling C<ev_async_send>, which is thread- and signal
		2167	safe.
		2168
		2169	This functionality is very similar to C<ev_signal> watchers, as signals,
		2170	too, are asynchronous in nature, and signals, too, will be compressed
		2171	(i.e. the number of callback invocations may be less than the number of
		2172	C<ev_async_sent> calls).
		2173
		2174	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not
		2175	just the default loop.
		2176
		2177	=head3 Queueing
		2178
		2179	C<ev_async> does not support queueing of data in any way. The reason
		2180	is that the author does not know of a simple (or any) algorithm for a
		2181	multiple-writer-single-reader queue that works in all cases and doesn't
		2182	need elaborate support such as pthreads.
		2183
		2184	That means that if you want to queue data, you have to provide your own
		2185	queue. But at least I can tell you would implement locking around your
		2186	queue:
		2187
		2188	=over 4
		2189
		2190	=item queueing from a signal handler context
		2191
		2192	To implement race-free queueing, you simply add to the queue in the signal
		2193	handler but you block the signal handler in the watcher callback. Here is an example that does that for
		2194	some fictitiuous SIGUSR1 handler:
		2195
		2196	static ev_async mysig;
		2197
		2198	static void
		2199	sigusr1_handler (void)
		2200	{
		2201	sometype data;
		2202
		2203	// no locking etc.
		2204	queue_put (data);
		2205	ev_async_send (EV_DEFAULT_ &mysig);
		2206	}
		2207
		2208	static void
		2209	mysig_cb (EV_P_ ev_async *w, int revents)
		2210	{
		2211	sometype data;
		2212	sigset_t block, prev;
		2213
		2214	sigemptyset (&block);
		2215	sigaddset (&block, SIGUSR1);
		2216	sigprocmask (SIG_BLOCK, &block, &prev);
		2217
		2218	while (queue_get (&data))
		2219	process (data);
		2220
		2221	if (sigismember (&prev, SIGUSR1)
		2222	sigprocmask (SIG_UNBLOCK, &block, 0);
		2223	}
		2224
		2225	(Note: pthreads in theory requires you to use C<pthread_setmask>
		2226	instead of C<sigprocmask> when you use threads, but libev doesn't do it
		2227	either...).
		2228
		2229	=item queueing from a thread context
		2230
		2231	The strategy for threads is different, as you cannot (easily) block
		2232	threads but you can easily preempt them, so to queue safely you need to
		2233	employ a traditional mutex lock, such as in this pthread example:
		2234
		2235	static ev_async mysig;
		2236	static pthread_mutex_t mymutex = PTHREAD_MUTEX_INITIALIZER;
		2237
		2238	static void
		2239	otherthread (void)
		2240	{
		2241	// only need to lock the actual queueing operation
		2242	pthread_mutex_lock (&mymutex);
		2243	queue_put (data);
		2244	pthread_mutex_unlock (&mymutex);
		2245
		2246	ev_async_send (EV_DEFAULT_ &mysig);
		2247	}
		2248
		2249	static void
		2250	mysig_cb (EV_P_ ev_async *w, int revents)
		2251	{
		2252	pthread_mutex_lock (&mymutex);
		2253
		2254	while (queue_get (&data))
		2255	process (data);
		2256
		2257	pthread_mutex_unlock (&mymutex);
		2258	}
		2259
		2260	=back
		2261
		2262
		2263	=head3 Watcher-Specific Functions and Data Members
		2264
		2265	=over 4
		2266
		2267	=item ev_async_init (ev_async *, callback)
		2268
		2269	Initialises and configures the async watcher - it has no parameters of any
		2270	kind. There is a C<ev_asynd_set> macro, but using it is utterly pointless,
		2271	believe me.
		2272
		2273	=item ev_async_send (loop, ev_async *)
		2274
		2275	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
		2276	an C<EV_ASYNC> event on the watcher into the event loop. Unlike
		2277	C<ev_feed_event>, this call is safe to do in other threads, signal or
		2278	similar contexts (see the dicusssion of C<EV_ATOMIC_T> in the embedding
		2279	section below on what exactly this means).
		2280
		2281	This call incurs the overhead of a syscall only once per loop iteration,
		2282	so while the overhead might be noticable, it doesn't apply to repeated
		2283	calls to C<ev_async_send>.
		2284
		2285	=back
		2286
		2287
1910	=head1 OTHER FUNCTIONS	2288	=head1 OTHER FUNCTIONS
1911		2289
1912	There are some other functions of possible interest. Described. Here. Now.	2290	There are some other functions of possible interest. Described. Here. Now.
1913		2291
1914	=over 4	2292	=over 4
…		…
2141	Example: Define a class with an IO and idle watcher, start one of them in	2519	Example: Define a class with an IO and idle watcher, start one of them in
2142	the constructor.	2520	the constructor.
2143		2521
2144	class myclass	2522	class myclass
2145	{	2523	{
2146	ev_io io; void io_cb (ev::io &w, int revents);	2524	ev::io io; void io_cb (ev::io &w, int revents);
2147	ev_idle idle void idle_cb (ev::idle &w, int revents);	2525	ev:idle idle void idle_cb (ev::idle &w, int revents);
2148		2526
2149	myclass ();	2527	myclass (int fd)
2150	}
2151
2152	myclass::myclass (int fd)
2153	{	2528	{
2154	io .set <myclass, &myclass::io_cb > (this);	2529	io .set <myclass, &myclass::io_cb > (this);
2155	idle.set <myclass, &myclass::idle_cb> (this);	2530	idle.set <myclass, &myclass::idle_cb> (this);
2156		2531
2157	io.start (fd, ev::READ);	2532	io.start (fd, ev::READ);
		2533	}
2158	}	2534	};
		2535
		2536
		2537	=head1 OTHER LANGUAGE BINDINGS
		2538
		2539	Libev does not offer other language bindings itself, but bindings for a
		2540	numbe rof languages exist in the form of third-party packages. If you know
		2541	any interesting language binding in addition to the ones listed here, drop
		2542	me a note.
		2543
		2544	=over 4
		2545
		2546	=item Perl
		2547
		2548	The EV module implements the full libev API and is actually used to test
		2549	libev. EV is developed together with libev. Apart from the EV core module,
		2550	there are additional modules that implement libev-compatible interfaces
		2551	to C<libadns> (C<EV::ADNS>), C<Net::SNMP> (C<Net::SNMP::EV>) and the
		2552	C<libglib> event core (C<Glib::EV> and C<EV::Glib>).
		2553
		2554	It can be found and installed via CPAN, its homepage is found at
		2555	L<http://software.schmorp.de/pkg/EV>.
		2556
		2557	=item Ruby
		2558
		2559	Tony Arcieri has written a ruby extension that offers access to a subset
		2560	of the libev API and adds filehandle abstractions, asynchronous DNS and
		2561	more on top of it. It can be found via gem servers. Its homepage is at
		2562	L<http://rev.rubyforge.org/>.
		2563
		2564	=item D
		2565
		2566	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
		2567	be found at L<http://git.llucax.com.ar/?p=software/ev.d.git;a=summary>.
		2568
		2569	=back
2159		2570
2160		2571
2161	=head1 MACRO MAGIC	2572	=head1 MACRO MAGIC
2162		2573
2163	Libev can be compiled with a variety of options, the most fundamantal	2574	Libev can be compiled with a variety of options, the most fundamantal
…		…
2368	wants osf handles on win32 (this is the case when the select to	2779	wants osf handles on win32 (this is the case when the select to
2369	be used is the winsock select). This means that it will call	2780	be used is the winsock select). This means that it will call
2370	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	2781	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
2371	it is assumed that all these functions actually work on fds, even	2782	it is assumed that all these functions actually work on fds, even
2372	on win32. Should not be defined on non-win32 platforms.	2783	on win32. Should not be defined on non-win32 platforms.
		2784
		2785	=item EV_FD_TO_WIN32_HANDLE
		2786
		2787	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
		2788	file descriptors to socket handles. When not defining this symbol (the
		2789	default), then libev will call C<_get_osfhandle>, which is usually
		2790	correct. In some cases, programs use their own file descriptor management,
		2791	in which case they can provide this function to map fds to socket handles.
2373		2792
2374	=item EV_USE_POLL	2793	=item EV_USE_POLL
2375		2794
2376	If defined to be C<1>, libev will compile in support for the C<poll>(2)	2795	If defined to be C<1>, libev will compile in support for the C<poll>(2)
2377	backend. Otherwise it will be enabled on non-win32 platforms. It	2796	backend. Otherwise it will be enabled on non-win32 platforms. It
…		…
2411		2830
2412	If defined to be C<1>, libev will compile in support for the Linux inotify	2831	If defined to be C<1>, libev will compile in support for the Linux inotify
2413	interface to speed up C<ev_stat> watchers. Its actual availability will	2832	interface to speed up C<ev_stat> watchers. Its actual availability will
2414	be detected at runtime.	2833	be detected at runtime.
2415		2834
		2835	=item EV_ATOMIC_T
		2836
		2837	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
		2838	access is atomic with respect to other threads or signal contexts. No such
		2839	type is easily found in the C language, so you can provide your own type
		2840	that you know is safe for your purposes. It is used both for signal handler "locking"
		2841	as well as for signal and thread safety in C<ev_async> watchers.
		2842
		2843	In the absense of this define, libev will use C<sig_atomic_t volatile>
		2844	(from F<signal.h>), which is usually good enough on most platforms.
		2845
2416	=item EV_H	2846	=item EV_H
2417		2847
2418	The name of the F<ev.h> header file used to include it. The default if	2848	The name of the F<ev.h> header file used to include it. The default if
2419	undefined is C<< <ev.h> >> in F<event.h> and C<"ev.h"> in F<ev.c>. This	2849	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
2420	can be used to virtually rename the F<ev.h> header file in case of conflicts.	2850	used to virtually rename the F<ev.h> header file in case of conflicts.
2421		2851
2422	=item EV_CONFIG_H	2852	=item EV_CONFIG_H
2423		2853
2424	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	2854	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
2425	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	2855	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
2426	C<EV_H>, above.	2856	C<EV_H>, above.
2427		2857
2428	=item EV_EVENT_H	2858	=item EV_EVENT_H
2429		2859
2430	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	2860	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
2431	of how the F<event.h> header can be found.	2861	of how the F<event.h> header can be found, the default is C<"event.h">.
2432		2862
2433	=item EV_PROTOTYPES	2863	=item EV_PROTOTYPES
2434		2864
2435	If defined to be C<0>, then F<ev.h> will not define any function	2865	If defined to be C<0>, then F<ev.h> will not define any function
2436	prototypes, but still define all the structs and other symbols. This is	2866	prototypes, but still define all the structs and other symbols. This is
…		…
2487	=item EV_FORK_ENABLE	2917	=item EV_FORK_ENABLE
2488		2918
2489	If undefined or defined to be C<1>, then fork watchers are supported. If	2919	If undefined or defined to be C<1>, then fork watchers are supported. If
2490	defined to be C<0>, then they are not.	2920	defined to be C<0>, then they are not.
2491		2921
		2922	=item EV_ASYNC_ENABLE
		2923
		2924	If undefined or defined to be C<1>, then async watchers are supported. If
		2925	defined to be C<0>, then they are not.
		2926
2492	=item EV_MINIMAL	2927	=item EV_MINIMAL
2493		2928
2494	If you need to shave off some kilobytes of code at the expense of some	2929	If you need to shave off some kilobytes of code at the expense of some
2495	speed, define this symbol to C<1>. Currently only used for gcc to override	2930	speed, define this symbol to C<1>. Currently only used for gcc to override
2496	some inlining decisions, saves roughly 30% codesize of amd64.	2931	some inlining decisions, saves roughly 30% codesize of amd64.
…		…
2502	than enough. If you need to manage thousands of children you might want to	2937	than enough. If you need to manage thousands of children you might want to
2503	increase this value (I<must> be a power of two).	2938	increase this value (I<must> be a power of two).
2504		2939
2505	=item EV_INOTIFY_HASHSIZE	2940	=item EV_INOTIFY_HASHSIZE
2506		2941
2507	C<ev_staz> watchers use a small hash table to distribute workload by	2942	C<ev_stat> watchers use a small hash table to distribute workload by
2508	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	2943	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),
2509	usually more than enough. If you need to manage thousands of C<ev_stat>	2944	usually more than enough. If you need to manage thousands of C<ev_stat>
2510	watchers you might want to increase this value (I<must> be a power of	2945	watchers you might want to increase this value (I<must> be a power of
2511	two).	2946	two).
2512		2947
…		…
2608		3043
2609	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)	3044	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)
2610		3045
2611	This means that, when you have a watcher that triggers in one hour and	3046	This means that, when you have a watcher that triggers in one hour and
2612	there are 100 watchers that would trigger before that then inserting will	3047	there are 100 watchers that would trigger before that then inserting will
2613	have to skip those 100 watchers.	3048	have to skip roughly seven (C<ld 100>) of these watchers.
2614		3049
2615	=item Changing timer/periodic watchers (by autorepeat, again): O(log skipped_other_timers)	3050	=item Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)
2616		3051
2617	That means that for changing a timer costs less than removing/adding them	3052	That means that changing a timer costs less than removing/adding them
2618	as only the relative motion in the event queue has to be paid for.	3053	as only the relative motion in the event queue has to be paid for.
2619		3054
2620	=item Starting io/check/prepare/idle/signal/child watchers: O(1)	3055	=item Starting io/check/prepare/idle/signal/child/fork/async watchers: O(1)
2621		3056
2622	These just add the watcher into an array or at the head of a list.	3057	These just add the watcher into an array or at the head of a list.
		3058
2623	=item Stopping check/prepare/idle watchers: O(1)	3059	=item Stopping check/prepare/idle/fork/async watchers: O(1)
2624		3060
2625	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))	3061	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
2626		3062
2627	These watchers are stored in lists then need to be walked to find the	3063	These watchers are stored in lists then need to be walked to find the
2628	correct watcher to remove. The lists are usually short (you don't usually	3064	correct watcher to remove. The lists are usually short (you don't usually
2629	have many watchers waiting for the same fd or signal).	3065	have many watchers waiting for the same fd or signal).
2630		3066
2631	=item Finding the next timer per loop iteration: O(1)	3067	=item Finding the next timer in each loop iteration: O(1)
		3068
		3069	By virtue of using a binary heap, the next timer is always found at the
		3070	beginning of the storage array.
2632		3071
2633	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)	3072	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
2634		3073
2635	A change means an I/O watcher gets started or stopped, which requires	3074	A change means an I/O watcher gets started or stopped, which requires
2636	libev to recalculate its status (and possibly tell the kernel).	3075	libev to recalculate its status (and possibly tell the kernel, depending
		3076	on backend and wether C<ev_io_set> was used).
2637		3077
2638	=item Activating one watcher: O(1)	3078	=item Activating one watcher (putting it into the pending state): O(1)
2639		3079
2640	=item Priority handling: O(number_of_priorities)	3080	=item Priority handling: O(number_of_priorities)
2641		3081
2642	Priorities are implemented by allocating some space for each	3082	Priorities are implemented by allocating some space for each
2643	priority. When doing priority-based operations, libev usually has to	3083	priority. When doing priority-based operations, libev usually has to
2644	linearly search all the priorities.	3084	linearly search all the priorities, but starting/stopping and activating
		3085	watchers becomes O(1) w.r.t. priority handling.
		3086
		3087	=item Sending an ev_async: O(1)
		3088
		3089	=item Processing ev_async_send: O(number_of_async_watchers)
		3090
		3091	=item Processing signals: O(max_signal_number)
		3092
		3093	Sending involves a syscall I<iff> there were no other C<ev_async_send>
		3094	calls in the current loop iteration. Checking for async and signal events
		3095	involves iterating over all running async watchers or all signal numbers.
2645		3096
2646	=back	3097	=back
2647		3098
2648		3099
		3100	=head1 Win32 platform limitations and workarounds
		3101
		3102	Win32 doesn't support any of the standards (e.g. POSIX) that libev
		3103	requires, and its I/O model is fundamentally incompatible with the POSIX
		3104	model. Libev still offers limited functionality on this platform in
		3105	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
		3106	descriptors. This only applies when using Win32 natively, not when using
		3107	e.g. cygwin.
		3108
		3109	There is no supported compilation method available on windows except
		3110	embedding it into other applications.
		3111
		3112	Due to the many, low, and arbitrary limits on the win32 platform and the
		3113	abysmal performance of winsockets, using a large number of sockets is not
		3114	recommended (and not reasonable). If your program needs to use more than
		3115	a hundred or so sockets, then likely it needs to use a totally different
		3116	implementation for windows, as libev offers the POSIX model, which cannot
		3117	be implemented efficiently on windows (microsoft monopoly games).
		3118
		3119	=over 4
		3120
		3121	=item The winsocket select function
		3122
		3123	The winsocket C<select> function doesn't follow POSIX in that it requires
		3124	socket I<handles> and not socket I<file descriptors>. This makes select
		3125	very inefficient, and also requires a mapping from file descriptors
		3126	to socket handles. See the discussion of the C<EV_SELECT_USE_FD_SET>,
		3127	C<EV_SELECT_IS_WINSOCKET> and C<EV_FD_TO_WIN32_HANDLE> preprocessor
		3128	symbols for more info.
		3129
		3130	The configuration for a "naked" win32 using the microsoft runtime
		3131	libraries and raw winsocket select is:
		3132
		3133	#define EV_USE_SELECT 1
		3134	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
		3135
		3136	Note that winsockets handling of fd sets is O(n), so you can easily get a
		3137	complexity in the O(n²) range when using win32.
		3138
		3139	=item Limited number of file descriptors
		3140
		3141	Windows has numerous arbitrary (and low) limits on things. Early versions
		3142	of winsocket's select only supported waiting for a max. of C<64> handles
		3143	(probably owning to the fact that all windows kernels can only wait for
		3144	C<64> things at the same time internally; microsoft recommends spawning a
		3145	chain of threads and wait for 63 handles and the previous thread in each).
		3146
		3147	Newer versions support more handles, but you need to define C<FD_SETSIZE>
		3148	to some high number (e.g. C<2048>) before compiling the winsocket select
		3149	call (which might be in libev or elsewhere, for example, perl does its own
		3150	select emulation on windows).
		3151
		3152	Another limit is the number of file descriptors in the microsoft runtime
		3153	libraries, which by default is C<64> (there must be a hidden I<64> fetish
		3154	or something like this inside microsoft). You can increase this by calling
		3155	C<_setmaxstdio>, which can increase this limit to C<2048> (another
		3156	arbitrary limit), but is broken in many versions of the microsoft runtime
		3157	libraries.
		3158
		3159	This might get you to about C<512> or C<2048> sockets (depending on
		3160	windows version and/or the phase of the moon). To get more, you need to
		3161	wrap all I/O functions and provide your own fd management, but the cost of
		3162	calling select (O(n²)) will likely make this unworkable.
		3163
		3164	=back
		3165
		3166
2649	=head1 AUTHOR	3167	=head1 AUTHOR
2650		3168
2651	Marc Lehmann <libev@schmorp.de>.	3169	Marc Lehmann <libev@schmorp.de>.
2652		3170

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing libev/ev.pod (file contents): Revision 1.97 by root, Sat Dec 22 05:48:02 2007 UTC vs. Revision 1.138 by root, Mon Mar 31 01:14:12 2008 UTC

Diff Legend

Comparing libev/ev.pod (file contents):
Revision 1.97 by root, Sat Dec 22 05:48:02 2007 UTC vs.
Revision 1.138 by root, Mon Mar 31 01:14:12 2008 UTC