ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.41 by root, Sat Nov 24 10:19:14 2007 UTC vs.
Revision 1.148 by root, Thu Apr 24 01:42:11 2008 UTC

…		…
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	#include <ev.h>	7	#include <ev.h>
8		8
		9	=head2 EXAMPLE PROGRAM
		10
		11	// a single header file is required
		12	#include <ev.h>
		13
		14	// every watcher type has its own typedef'd struct
		15	// with the name ev_<type>
		16	ev_io stdin_watcher;
		17	ev_timer timeout_watcher;
		18
		19	// all watcher callbacks have a similar signature
		20	// this callback is called when data is readable on stdin
		21	static void
		22	stdin_cb (EV_P_ struct ev_io *w, int revents)
		23	{
		24	puts ("stdin ready");
		25	// for one-shot events, one must manually stop the watcher
		26	// with its corresponding stop function.
		27	ev_io_stop (EV_A_ w);
		28
		29	// this causes all nested ev_loop's to stop iterating
		30	ev_unloop (EV_A_ EVUNLOOP_ALL);
		31	}
		32
		33	// another callback, this time for a time-out
		34	static void
		35	timeout_cb (EV_P_ struct ev_timer *w, int revents)
		36	{
		37	puts ("timeout");
		38	// this causes the innermost ev_loop to stop iterating
		39	ev_unloop (EV_A_ EVUNLOOP_ONE);
		40	}
		41
		42	int
		43	main (void)
		44	{
		45	// use the default event loop unless you have special needs
		46	struct ev_loop *loop = ev_default_loop (0);
		47
		48	// initialise an io watcher, then start it
		49	// this one will watch for stdin to become readable
		50	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
		51	ev_io_start (loop, &stdin_watcher);
		52
		53	// initialise a timer watcher, then start it
		54	// simple non-repeating 5.5 second timeout
		55	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
		56	ev_timer_start (loop, &timeout_watcher);
		57
		58	// now wait for events to arrive
		59	ev_loop (loop, 0);
		60
		61	// unloop was called, so exit
		62	return 0;
		63	}
		64
9	=head1 DESCRIPTION	65	=head1 DESCRIPTION
10		66
		67	The newest version of this document is also available as an html-formatted
		68	web page you might find easier to navigate when reading it for the first
		69	time: L<http://cvs.schmorp.de/libev/ev.html>.
		70
11	Libev is an event loop: you register interest in certain events (such as a	71	Libev is an event loop: you register interest in certain events (such as a
12	file descriptor being readable or a timeout occuring), and it will manage	72	file descriptor being readable or a timeout occurring), and it will manage
13	these event sources and provide your program with events.	73	these event sources and provide your program with events.
14		74
15	To do this, it must take more or less complete control over your process	75	To do this, it must take more or less complete control over your process
16	(or thread) by executing the I<event loop> handler, and will then	76	(or thread) by executing the I<event loop> handler, and will then
17	communicate events via a callback mechanism.	77	communicate events via a callback mechanism.
…		…
19	You register interest in certain events by registering so-called I<event	79	You register interest in certain events by registering so-called I<event
20	watchers>, which are relatively small C structures you initialise with the	80	watchers>, which are relatively small C structures you initialise with the
21	details of the event, and then hand it over to libev by I<starting> the	81	details of the event, and then hand it over to libev by I<starting> the
22	watcher.	82	watcher.
23		83
24	=head1 FEATURES	84	=head2 FEATURES
25		85
26	Libev supports select, poll, the linux-specific epoll and the bsd-specific	86	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
27	kqueue mechanisms for file descriptor events, relative timers, absolute	87	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
28	timers with customised rescheduling, signal events, process status change	88	for file descriptor events (C<ev_io>), the Linux C<inotify> interface
29	events (related to SIGCHLD), and event watchers dealing with the event	89	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers
30	loop mechanism itself (idle, prepare and check watchers). It also is quite	90	with customised rescheduling (C<ev_periodic>), synchronous signals
		91	(C<ev_signal>), process status change events (C<ev_child>), and event
		92	watchers dealing with the event loop mechanism itself (C<ev_idle>,
		93	C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as
		94	file watchers (C<ev_stat>) and even limited support for fork events
		95	(C<ev_fork>).
		96
		97	It also is quite fast (see this
31	fast (see this L<benchmark|http://libev.schmorp.de/bench.html> comparing	98	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
32	it to libevent for example).	99	for example).
33		100
34	=head1 CONVENTIONS	101	=head2 CONVENTIONS
35		102
36	Libev is very configurable. In this manual the default configuration	103	Libev is very configurable. In this manual the default (and most common)
37	will be described, which supports multiple event loops. For more info	104	configuration will be described, which supports multiple event loops. For
38	about various configuration options please have a look at the file	105	more info about various configuration options please have a look at
39	F<README.embed> in the libev distribution. If libev was configured without	106	B<EMBED> section in this manual. If libev was configured without support
40	support for multiple event loops, then all functions taking an initial	107	for multiple event loops, then all functions taking an initial argument of
41	argument of name C<loop> (which is always of type C<struct ev_loop *>)	108	name C<loop> (which is always of type C<struct ev_loop *>) will not have
42	will not have this argument.	109	this argument.
43		110
44	=head1 TIME REPRESENTATION	111	=head2 TIME REPRESENTATION
45		112
46	Libev represents time as a single floating point number, representing the	113	Libev represents time as a single floating point number, representing the
47	(fractional) number of seconds since the (POSIX) epoch (somewhere near	114	(fractional) number of seconds since the (POSIX) epoch (somewhere near
48	the beginning of 1970, details are complicated, don't ask). This type is	115	the beginning of 1970, details are complicated, don't ask). This type is
49	called C<ev_tstamp>, which is what you should use too. It usually aliases	116	called C<ev_tstamp>, which is what you should use too. It usually aliases
50	to the C<double> type in C, and when you need to do any calculations on	117	to the C<double> type in C, and when you need to do any calculations on
51	it, you should treat it as such.	118	it, you should treat it as some floatingpoint value. Unlike the name
52		119	component C<stamp> might indicate, it is also used for time differences
		120	throughout libev.
53		121
54	=head1 GLOBAL FUNCTIONS	122	=head1 GLOBAL FUNCTIONS
55		123
56	These functions can be called anytime, even before initialising the	124	These functions can be called anytime, even before initialising the
57	library in any way.	125	library in any way.
…		…
62		130
63	Returns the current time as libev would use it. Please note that the	131	Returns the current time as libev would use it. Please note that the
64	C<ev_now> function is usually faster and also often returns the timestamp	132	C<ev_now> function is usually faster and also often returns the timestamp
65	you actually want to know.	133	you actually want to know.
66		134
		135	=item ev_sleep (ev_tstamp interval)
		136
		137	Sleep for the given interval: The current thread will be blocked until
		138	either it is interrupted or the given time interval has passed. Basically
		139	this is a subsecond-resolution C<sleep ()>.
		140
67	=item int ev_version_major ()	141	=item int ev_version_major ()
68		142
69	=item int ev_version_minor ()	143	=item int ev_version_minor ()
70		144
71	You can find out the major and minor version numbers of the library	145	You can find out the major and minor ABI version numbers of the library
72	you linked against by calling the functions C<ev_version_major> and	146	you linked against by calling the functions C<ev_version_major> and
73	C<ev_version_minor>. If you want, you can compare against the global	147	C<ev_version_minor>. If you want, you can compare against the global
74	symbols C<EV_VERSION_MAJOR> and C<EV_VERSION_MINOR>, which specify the	148	symbols C<EV_VERSION_MAJOR> and C<EV_VERSION_MINOR>, which specify the
75	version of the library your program was compiled against.	149	version of the library your program was compiled against.
76		150
		151	These version numbers refer to the ABI version of the library, not the
		152	release version.
		153
77	Usually, it's a good idea to terminate if the major versions mismatch,	154	Usually, it's a good idea to terminate if the major versions mismatch,
78	as this indicates an incompatible change. Minor versions are usually	155	as this indicates an incompatible change. Minor versions are usually
79	compatible to older versions, so a larger minor version alone is usually	156	compatible to older versions, so a larger minor version alone is usually
80	not a problem.	157	not a problem.
81		158
82	Example: make sure we haven't accidentally been linked against the wrong	159	Example: Make sure we haven't accidentally been linked against the wrong
83	version:	160	version.
84		161
85	assert (("libev version mismatch",	162	assert (("libev version mismatch",
86	ev_version_major () == EV_VERSION_MAJOR	163	ev_version_major () == EV_VERSION_MAJOR
87	&& ev_version_minor () >= EV_VERSION_MINOR));	164	&& ev_version_minor () >= EV_VERSION_MINOR));
88		165
…		…
118		195
119	See the description of C<ev_embed> watchers for more info.	196	See the description of C<ev_embed> watchers for more info.
120		197
121	=item ev_set_allocator (void *(*cb)(void *ptr, long size))	198	=item ev_set_allocator (void *(*cb)(void *ptr, long size))
122		199
123	Sets the allocation function to use (the prototype is similar to the	200	Sets the allocation function to use (the prototype is similar - the
124	realloc C function, the semantics are identical). It is used to allocate	201	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
125	and free memory (no surprises here). If it returns zero when memory	202	used to allocate and free memory (no surprises here). If it returns zero
126	needs to be allocated, the library might abort or take some potentially	203	when memory needs to be allocated (C<size != 0>), the library might abort
127	destructive action. The default is your system realloc function.	204	or take some potentially destructive action.
		205
		206	Since some systems (at least OpenBSD and Darwin) fail to implement
		207	correct C<realloc> semantics, libev will use a wrapper around the system
		208	C<realloc> and C<free> functions by default.
128		209
129	You could override this function in high-availability programs to, say,	210	You could override this function in high-availability programs to, say,
130	free some memory if it cannot allocate memory, to use a special allocator,	211	free some memory if it cannot allocate memory, to use a special allocator,
131	or even to sleep a while and retry until some memory is available.	212	or even to sleep a while and retry until some memory is available.
132		213
133	Example: replace the libev allocator with one that waits a bit and then	214	Example: Replace the libev allocator with one that waits a bit and then
134	retries: better than mine).	215	retries (example requires a standards-compliant C<realloc>).
135		216
136	static void *	217	static void *
137	persistent_realloc (void *ptr, long size)	218	persistent_realloc (void *ptr, size_t size)
138	{	219	{
139	for (;;)	220	for (;;)
140	{	221	{
141	void *newptr = realloc (ptr, size);	222	void *newptr = realloc (ptr, size);
142		223
…		…
158	callback is set, then libev will expect it to remedy the sitution, no	239	callback is set, then libev will expect it to remedy the sitution, no
159	matter what, when it returns. That is, libev will generally retry the	240	matter what, when it returns. That is, libev will generally retry the
160	requested operation, or, if the condition doesn't go away, do bad stuff	241	requested operation, or, if the condition doesn't go away, do bad stuff
161	(such as abort).	242	(such as abort).
162		243
163	Example: do the same thing as libev does internally:	244	Example: This is basically the same thing that libev does internally, too.
164		245
165	static void	246	static void
166	fatal_error (const char *msg)	247	fatal_error (const char *msg)
167	{	248	{
168	perror (msg);	249	perror (msg);
…		…
178		259
179	An event loop is described by a C<struct ev_loop *>. The library knows two	260	An event loop is described by a C<struct ev_loop *>. The library knows two
180	types of such loops, the I<default> loop, which supports signals and child	261	types of such loops, the I<default> loop, which supports signals and child
181	events, and dynamically created loops which do not.	262	events, and dynamically created loops which do not.
182		263
183	If you use threads, a common model is to run the default event loop
184	in your main thread (or in a separate thread) and for each thread you
185	create, you also create another event loop. Libev itself does no locking
186	whatsoever, so if you mix calls to the same event loop in different
187	threads, make sure you lock (this is usually a bad idea, though, even if
188	done correctly, because it's hideous and inefficient).
189
190	=over 4	264	=over 4
191		265
192	=item struct ev_loop *ev_default_loop (unsigned int flags)	266	=item struct ev_loop *ev_default_loop (unsigned int flags)
193		267
194	This will initialise the default event loop if it hasn't been initialised	268	This will initialise the default event loop if it hasn't been initialised
…		…
196	false. If it already was initialised it simply returns it (and ignores the	270	false. If it already was initialised it simply returns it (and ignores the
197	flags. If that is troubling you, check C<ev_backend ()> afterwards).	271	flags. If that is troubling you, check C<ev_backend ()> afterwards).
198		272
199	If you don't know what event loop to use, use the one returned from this	273	If you don't know what event loop to use, use the one returned from this
200	function.	274	function.
		275
		276	Note that this function is I<not> thread-safe, so if you want to use it
		277	from multiple threads, you have to lock (note also that this is unlikely,
		278	as loops cannot bes hared easily between threads anyway).
		279
		280	The default loop is the only loop that can handle C<ev_signal> and
		281	C<ev_child> watchers, and to do this, it always registers a handler
		282	for C<SIGCHLD>. If this is a problem for your app you can either
		283	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you
		284	can simply overwrite the C<SIGCHLD> signal handler I<after> calling
		285	C<ev_default_init>.
201		286
202	The flags argument can be used to specify special behaviour or specific	287	The flags argument can be used to specify special behaviour or specific
203	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	288	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
204		289
205	The following flags are supported:	290	The following flags are supported:
…		…
218	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will	303	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will
219	override the flags completely if it is found in the environment. This is	304	override the flags completely if it is found in the environment. This is
220	useful to try out specific backends to test their performance, or to work	305	useful to try out specific backends to test their performance, or to work
221	around bugs.	306	around bugs.
222		307
		308	=item C<EVFLAG_FORKCHECK>
		309
		310	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after
		311	a fork, you can also make libev check for a fork in each iteration by
		312	enabling this flag.
		313
		314	This works by calling C<getpid ()> on every iteration of the loop,
		315	and thus this might slow down your event loop if you do a lot of loop
		316	iterations and little real work, but is usually not noticeable (on my
		317	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence
		318	without a syscall and thus I<very> fast, but my GNU/Linux system also has
		319	C<pthread_atfork> which is even faster).
		320
		321	The big advantage of this flag is that you can forget about fork (and
		322	forget about forgetting to tell libev about forking) when you use this
		323	flag.
		324
		325	This flag setting cannot be overriden or specified in the C<LIBEV_FLAGS>
		326	environment variable.
		327
223	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	328	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
224		329
225	This is your standard select(2) backend. Not I<completely> standard, as	330	This is your standard select(2) backend. Not I<completely> standard, as
226	libev tries to roll its own fd_set with no limits on the number of fds,	331	libev tries to roll its own fd_set with no limits on the number of fds,
227	but if that fails, expect a fairly low limit on the number of fds when	332	but if that fails, expect a fairly low limit on the number of fds when
228	using this backend. It doesn't scale too well (O(highest_fd)), but its usually	333	using this backend. It doesn't scale too well (O(highest_fd)), but its
229	the fastest backend for a low number of fds.	334	usually the fastest backend for a low number of (low-numbered :) fds.
		335
		336	To get good performance out of this backend you need a high amount of
		337	parallelity (most of the file descriptors should be busy). If you are
		338	writing a server, you should C<accept ()> in a loop to accept as many
		339	connections as possible during one iteration. You might also want to have
		340	a look at C<ev_set_io_collect_interval ()> to increase the amount of
		341	readyness notifications you get per iteration.
230		342
231	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)	343	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)
232		344
233	And this is your standard poll(2) backend. It's more complicated than	345	And this is your standard poll(2) backend. It's more complicated
234	select, but handles sparse fds better and has no artificial limit on the	346	than select, but handles sparse fds better and has no artificial
235	number of fds you can use (except it will slow down considerably with a	347	limit on the number of fds you can use (except it will slow down
236	lot of inactive fds). It scales similarly to select, i.e. O(total_fds).	348	considerably with a lot of inactive fds). It scales similarly to select,
		349	i.e. O(total_fds). See the entry for C<EVBACKEND_SELECT>, above, for
		350	performance tips.
237		351
238	=item C<EVBACKEND_EPOLL> (value 4, Linux)	352	=item C<EVBACKEND_EPOLL> (value 4, Linux)
239		353
240	For few fds, this backend is a bit little slower than poll and select,	354	For few fds, this backend is a bit little slower than poll and select,
241	but it scales phenomenally better. While poll and select usually scale like	355	but it scales phenomenally better. While poll and select usually scale
242	O(total_fds) where n is the total number of fds (or the highest fd), epoll scales	356	like O(total_fds) where n is the total number of fds (or the highest fd),
243	either O(1) or O(active_fds).	357	epoll scales either O(1) or O(active_fds). The epoll design has a number
		358	of shortcomings, such as silently dropping events in some hard-to-detect
		359	cases and requiring a syscall per fd change, no fork support and bad
		360	support for dup.
244		361
245	While stopping and starting an I/O watcher in the same iteration will	362	While stopping, setting and starting an I/O watcher in the same iteration
246	result in some caching, there is still a syscall per such incident	363	will result in some caching, there is still a syscall per such incident
247	(because the fd could point to a different file description now), so its	364	(because the fd could point to a different file description now), so its
248	best to avoid that. Also, dup()ed file descriptors might not work very	365	best to avoid that. Also, C<dup ()>'ed file descriptors might not work
249	well if you register events for both fds.	366	very well if you register events for both fds.
250		367
251	Please note that epoll sometimes generates spurious notifications, so you	368	Please note that epoll sometimes generates spurious notifications, so you
252	need to use non-blocking I/O or other means to avoid blocking when no data	369	need to use non-blocking I/O or other means to avoid blocking when no data
253	(or space) is available.	370	(or space) is available.
254		371
		372	Best performance from this backend is achieved by not unregistering all
		373	watchers for a file descriptor until it has been closed, if possible, i.e.
		374	keep at least one watcher active per fd at all times.
		375
		376	While nominally embeddeble in other event loops, this feature is broken in
		377	all kernel versions tested so far.
		378
255	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	379	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
256		380
257	Kqueue deserves special mention, as at the time of this writing, it	381	Kqueue deserves special mention, as at the time of this writing, it
258	was broken on all BSDs except NetBSD (usually it doesn't work with	382	was broken on all BSDs except NetBSD (usually it doesn't work reliably
259	anything but sockets and pipes, except on Darwin, where of course its	383	with anything but sockets and pipes, except on Darwin, where of course
260	completely useless). For this reason its not being "autodetected"	384	it's completely useless). For this reason it's not being "autodetected"
261	unless you explicitly specify it explicitly in the flags (i.e. using	385	unless you explicitly specify it explicitly in the flags (i.e. using
262	C<EVBACKEND_KQUEUE>).	386	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)
		387	system like NetBSD.
		388
		389	You still can embed kqueue into a normal poll or select backend and use it
		390	only for sockets (after having made sure that sockets work with kqueue on
		391	the target platform). See C<ev_embed> watchers for more info.
263		392
264	It scales in the same way as the epoll backend, but the interface to the	393	It scales in the same way as the epoll backend, but the interface to the
265	kernel is more efficient (which says nothing about its actual speed, of	394	kernel is more efficient (which says nothing about its actual speed, of
266	course). While starting and stopping an I/O watcher does not cause an	395	course). While stopping, setting and starting an I/O watcher does never
267	extra syscall as with epoll, it still adds up to four event changes per	396	cause an extra syscall as with C<EVBACKEND_EPOLL>, it still adds up to
268	incident, so its best to avoid that.	397	two event changes per incident, support for C<fork ()> is very bad and it
		398	drops fds silently in similarly hard-to-detect cases.
		399
		400	This backend usually performs well under most conditions.
		401
		402	While nominally embeddable in other event loops, this doesn't work
		403	everywhere, so you might need to test for this. And since it is broken
		404	almost everywhere, you should only use it when you have a lot of sockets
		405	(for which it usually works), by embedding it into another event loop
		406	(e.g. C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>) and using it only for
		407	sockets.
269		408
270	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)	409	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)
271		410
272	This is not implemented yet (and might never be).	411	This is not implemented yet (and might never be, unless you send me an
		412	implementation). According to reports, C</dev/poll> only supports sockets
		413	and is not embeddable, which would limit the usefulness of this backend
		414	immensely.
273		415
274	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	416	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
275		417
276	This uses the Solaris 10 port mechanism. As with everything on Solaris,	418	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
277	it's really slow, but it still scales very well (O(active_fds)).	419	it's really slow, but it still scales very well (O(active_fds)).
278		420
279	Please note that solaris ports can result in a lot of spurious	421	Please note that solaris event ports can deliver a lot of spurious
280	notifications, so you need to use non-blocking I/O or other means to avoid	422	notifications, so you need to use non-blocking I/O or other means to avoid
281	blocking when no data (or space) is available.	423	blocking when no data (or space) is available.
		424
		425	While this backend scales well, it requires one system call per active
		426	file descriptor per loop iteration. For small and medium numbers of file
		427	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
		428	might perform better.
		429
		430	On the positive side, ignoring the spurious readyness notifications, this
		431	backend actually performed to specification in all tests and is fully
		432	embeddable, which is a rare feat among the OS-specific backends.
282		433
283	=item C<EVBACKEND_ALL>	434	=item C<EVBACKEND_ALL>
284		435
285	Try all backends (even potentially broken ones that wouldn't be tried	436	Try all backends (even potentially broken ones that wouldn't be tried
286	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	437	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
287	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	438	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
288		439
		440	It is definitely not recommended to use this flag.
		441
289	=back	442	=back
290		443
291	If one or more of these are ored into the flags value, then only these	444	If one or more of these are ored into the flags value, then only these
292	backends will be tried (in the reverse order as given here). If none are	445	backends will be tried (in the reverse order as listed here). If none are
293	specified, most compiled-in backend will be tried, usually in reverse	446	specified, all backends in C<ev_recommended_backends ()> will be tried.
294	order of their flag values :)
295		447
296	The most typical usage is like this:	448	The most typical usage is like this:
297		449
298	if (!ev_default_loop (0))	450	if (!ev_default_loop (0))
299	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");	451	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
…		…
314	Similar to C<ev_default_loop>, but always creates a new event loop that is	466	Similar to C<ev_default_loop>, but always creates a new event loop that is
315	always distinct from the default loop. Unlike the default loop, it cannot	467	always distinct from the default loop. Unlike the default loop, it cannot
316	handle signal and child watchers, and attempts to do so will be greeted by	468	handle signal and child watchers, and attempts to do so will be greeted by
317	undefined behaviour (or a failed assertion if assertions are enabled).	469	undefined behaviour (or a failed assertion if assertions are enabled).
318		470
		471	Note that this function I<is> thread-safe, and the recommended way to use
		472	libev with threads is indeed to create one loop per thread, and using the
		473	default loop in the "main" or "initial" thread.
		474
319	Example: try to create a event loop that uses epoll and nothing else.	475	Example: Try to create a event loop that uses epoll and nothing else.
320		476
321	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	477	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
322	if (!epoller)	478	if (!epoller)
323	fatal ("no epoll found here, maybe it hides under your chair");	479	fatal ("no epoll found here, maybe it hides under your chair");
324		480
…		…
327	Destroys the default loop again (frees all memory and kernel state	483	Destroys the default loop again (frees all memory and kernel state
328	etc.). None of the active event watchers will be stopped in the normal	484	etc.). None of the active event watchers will be stopped in the normal
329	sense, so e.g. C<ev_is_active> might still return true. It is your	485	sense, so e.g. C<ev_is_active> might still return true. It is your
330	responsibility to either stop all watchers cleanly yoursef I<before>	486	responsibility to either stop all watchers cleanly yoursef I<before>
331	calling this function, or cope with the fact afterwards (which is usually	487	calling this function, or cope with the fact afterwards (which is usually
332	the easiest thing, youc na just ignore the watchers and/or C<free ()> them	488	the easiest thing, you can just ignore the watchers and/or C<free ()> them
333	for example).	489	for example).
		490
		491	Note that certain global state, such as signal state, will not be freed by
		492	this function, and related watchers (such as signal and child watchers)
		493	would need to be stopped manually.
		494
		495	In general it is not advisable to call this function except in the
		496	rare occasion where you really need to free e.g. the signal handling
		497	pipe fds. If you need dynamically allocated loops it is better to use
		498	C<ev_loop_new> and C<ev_loop_destroy>).
334		499
335	=item ev_loop_destroy (loop)	500	=item ev_loop_destroy (loop)
336		501
337	Like C<ev_default_destroy>, but destroys an event loop created by an	502	Like C<ev_default_destroy>, but destroys an event loop created by an
338	earlier call to C<ev_loop_new>.	503	earlier call to C<ev_loop_new>.
339		504
340	=item ev_default_fork ()	505	=item ev_default_fork ()
341		506
		507	This function sets a flag that causes subsequent C<ev_loop> iterations
342	This function reinitialises the kernel state for backends that have	508	to reinitialise the kernel state for backends that have one. Despite the
343	one. Despite the name, you can call it anytime, but it makes most sense	509	name, you can call it anytime, but it makes most sense after forking, in
344	after forking, in either the parent or child process (or both, but that	510	the child process (or both child and parent, but that again makes little
345	again makes little sense).	511	sense). You I<must> call it in the child before using any of the libev
		512	functions, and it will only take effect at the next C<ev_loop> iteration.
346		513
347	You I<must> call this function in the child process after forking if and	514	On the other hand, you only need to call this function in the child
348	only if you want to use the event library in both processes. If you just	515	process if and only if you want to use the event library in the child. If
349	fork+exec, you don't have to call it.	516	you just fork+exec, you don't have to call it at all.
350		517
351	The function itself is quite fast and it's usually not a problem to call	518	The function itself is quite fast and it's usually not a problem to call
352	it just in case after a fork. To make this easy, the function will fit in	519	it just in case after a fork. To make this easy, the function will fit in
353	quite nicely into a call to C<pthread_atfork>:	520	quite nicely into a call to C<pthread_atfork>:
354		521
355	pthread_atfork (0, 0, ev_default_fork);	522	pthread_atfork (0, 0, ev_default_fork);
356		523
357	At the moment, C<EVBACKEND_SELECT> and C<EVBACKEND_POLL> are safe to use
358	without calling this function, so if you force one of those backends you
359	do not need to care.
360
361	=item ev_loop_fork (loop)	524	=item ev_loop_fork (loop)
362		525
363	Like C<ev_default_fork>, but acts on an event loop created by	526	Like C<ev_default_fork>, but acts on an event loop created by
364	C<ev_loop_new>. Yes, you have to call this on every allocated event loop	527	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
365	after fork, and how you do this is entirely your own problem.	528	after fork, and how you do this is entirely your own problem.
		529
		530	=item int ev_is_default_loop (loop)
		531
		532	Returns true when the given loop actually is the default loop, false otherwise.
		533
		534	=item unsigned int ev_loop_count (loop)
		535
		536	Returns the count of loop iterations for the loop, which is identical to
		537	the number of times libev did poll for new events. It starts at C<0> and
		538	happily wraps around with enough iterations.
		539
		540	This value can sometimes be useful as a generation counter of sorts (it
		541	"ticks" the number of loop iterations), as it roughly corresponds with
		542	C<ev_prepare> and C<ev_check> calls.
366		543
367	=item unsigned int ev_backend (loop)	544	=item unsigned int ev_backend (loop)
368		545
369	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	546	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
370	use.	547	use.
…		…
373		550
374	Returns the current "event loop time", which is the time the event loop	551	Returns the current "event loop time", which is the time the event loop
375	received events and started processing them. This timestamp does not	552	received events and started processing them. This timestamp does not
376	change as long as callbacks are being processed, and this is also the base	553	change as long as callbacks are being processed, and this is also the base
377	time used for relative timers. You can treat it as the timestamp of the	554	time used for relative timers. You can treat it as the timestamp of the
378	event occuring (or more correctly, libev finding out about it).	555	event occurring (or more correctly, libev finding out about it).
379		556
380	=item ev_loop (loop, int flags)	557	=item ev_loop (loop, int flags)
381		558
382	Finally, this is it, the event handler. This function usually is called	559	Finally, this is it, the event handler. This function usually is called
383	after you initialised all your watchers and you want to start handling	560	after you initialised all your watchers and you want to start handling
…		…
404	libev watchers. However, a pair of C<ev_prepare>/C<ev_check> watchers is	581	libev watchers. However, a pair of C<ev_prepare>/C<ev_check> watchers is
405	usually a better approach for this kind of thing.	582	usually a better approach for this kind of thing.
406		583
407	Here are the gory details of what C<ev_loop> does:	584	Here are the gory details of what C<ev_loop> does:
408		585
409	* If there are no active watchers (reference count is zero), return.	586	- Before the first iteration, call any pending watchers.
410	- Queue prepare watchers and then call all outstanding watchers.	587	* If EVFLAG_FORKCHECK was used, check for a fork.
		588	- If a fork was detected, queue and call all fork watchers.
		589	- Queue and call all prepare watchers.
411	- If we have been forked, recreate the kernel state.	590	- If we have been forked, recreate the kernel state.
412	- Update the kernel state with all outstanding changes.	591	- Update the kernel state with all outstanding changes.
413	- Update the "event loop time".	592	- Update the "event loop time".
414	- Calculate for how long to block.	593	- Calculate for how long to sleep or block, if at all
		594	(active idle watchers, EVLOOP_NONBLOCK or not having
		595	any active watchers at all will result in not sleeping).
		596	- Sleep if the I/O and timer collect interval say so.
415	- Block the process, waiting for any events.	597	- Block the process, waiting for any events.
416	- Queue all outstanding I/O (fd) events.	598	- Queue all outstanding I/O (fd) events.
417	- Update the "event loop time" and do time jump handling.	599	- Update the "event loop time" and do time jump handling.
418	- Queue all outstanding timers.	600	- Queue all outstanding timers.
419	- Queue all outstanding periodics.	601	- Queue all outstanding periodics.
420	- If no events are pending now, queue all idle watchers.	602	- If no events are pending now, queue all idle watchers.
421	- Queue all check watchers.	603	- Queue all check watchers.
422	- Call all queued watchers in reverse order (i.e. check watchers first).	604	- Call all queued watchers in reverse order (i.e. check watchers first).
423	Signals and child watchers are implemented as I/O watchers, and will	605	Signals and child watchers are implemented as I/O watchers, and will
424	be handled here by queueing them when their watcher gets executed.	606	be handled here by queueing them when their watcher gets executed.
425	- If ev_unloop has been called or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	607	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK
426	were used, return, otherwise continue with step *.	608	were used, or there are no active watchers, return, otherwise
		609	continue with step *.
427		610
428	Example: queue some jobs and then loop until no events are outsanding	611	Example: Queue some jobs and then loop until no events are outstanding
429	anymore.	612	anymore.
430		613
431	... queue jobs here, make sure they register event watchers as long	614	... queue jobs here, make sure they register event watchers as long
432	... as they still have work to do (even an idle watcher will do..)	615	... as they still have work to do (even an idle watcher will do..)
433	ev_loop (my_loop, 0);	616	ev_loop (my_loop, 0);
…		…
437		620
438	Can be used to make a call to C<ev_loop> return early (but only after it	621	Can be used to make a call to C<ev_loop> return early (but only after it
439	has processed all outstanding events). The C<how> argument must be either	622	has processed all outstanding events). The C<how> argument must be either
440	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	623	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or
441	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	624	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.
		625
		626	This "unloop state" will be cleared when entering C<ev_loop> again.
442		627
443	=item ev_ref (loop)	628	=item ev_ref (loop)
444		629
445	=item ev_unref (loop)	630	=item ev_unref (loop)
446		631
…		…
451	returning, ev_unref() after starting, and ev_ref() before stopping it. For	636	returning, ev_unref() after starting, and ev_ref() before stopping it. For
452	example, libev itself uses this for its internal signal pipe: It is not	637	example, libev itself uses this for its internal signal pipe: It is not
453	visible to the libev user and should not keep C<ev_loop> from exiting if	638	visible to the libev user and should not keep C<ev_loop> from exiting if
454	no event watchers registered by it are active. It is also an excellent	639	no event watchers registered by it are active. It is also an excellent
455	way to do this for generic recurring timers or from within third-party	640	way to do this for generic recurring timers or from within third-party
456	libraries. Just remember to I<unref after start> and I<ref before stop>.	641	libraries. Just remember to I<unref after start> and I<ref before stop>
		642	(but only if the watcher wasn't active before, or was active before,
		643	respectively).
457		644
458	Example: create a signal watcher, but keep it from keeping C<ev_loop>	645	Example: Create a signal watcher, but keep it from keeping C<ev_loop>
459	running when nothing else is active.	646	running when nothing else is active.
460		647
461	struct dv_signal exitsig;	648	struct ev_signal exitsig;
462	ev_signal_init (&exitsig, sig_cb, SIGINT);	649	ev_signal_init (&exitsig, sig_cb, SIGINT);
463	ev_signal_start (myloop, &exitsig);	650	ev_signal_start (loop, &exitsig);
464	evf_unref (myloop);	651	evf_unref (loop);
465		652
466	Example: for some weird reason, unregister the above signal handler again.	653	Example: For some weird reason, unregister the above signal handler again.
467		654
468	ev_ref (myloop);	655	ev_ref (loop);
469	ev_signal_stop (myloop, &exitsig);	656	ev_signal_stop (loop, &exitsig);
		657
		658	=item ev_set_io_collect_interval (loop, ev_tstamp interval)
		659
		660	=item ev_set_timeout_collect_interval (loop, ev_tstamp interval)
		661
		662	These advanced functions influence the time that libev will spend waiting
		663	for events. Both are by default C<0>, meaning that libev will try to
		664	invoke timer/periodic callbacks and I/O callbacks with minimum latency.
		665
		666	Setting these to a higher value (the C<interval> I<must> be >= C<0>)
		667	allows libev to delay invocation of I/O and timer/periodic callbacks to
		668	increase efficiency of loop iterations.
		669
		670	The background is that sometimes your program runs just fast enough to
		671	handle one (or very few) event(s) per loop iteration. While this makes
		672	the program responsive, it also wastes a lot of CPU time to poll for new
		673	events, especially with backends like C<select ()> which have a high
		674	overhead for the actual polling but can deliver many events at once.
		675
		676	By setting a higher I<io collect interval> you allow libev to spend more
		677	time collecting I/O events, so you can handle more events per iteration,
		678	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
		679	C<ev_timer>) will be not affected. Setting this to a non-null value will
		680	introduce an additional C<ev_sleep ()> call into most loop iterations.
		681
		682	Likewise, by setting a higher I<timeout collect interval> you allow libev
		683	to spend more time collecting timeouts, at the expense of increased
		684	latency (the watcher callback will be called later). C<ev_io> watchers
		685	will not be affected. Setting this to a non-null value will not introduce
		686	any overhead in libev.
		687
		688	Many (busy) programs can usually benefit by setting the io collect
		689	interval to a value near C<0.1> or so, which is often enough for
		690	interactive servers (of course not for games), likewise for timeouts. It
		691	usually doesn't make much sense to set it to a lower value than C<0.01>,
		692	as this approsaches the timing granularity of most systems.
470		693
471	=back	694	=back
		695
472		696
473	=head1 ANATOMY OF A WATCHER	697	=head1 ANATOMY OF A WATCHER
474		698
475	A watcher is a structure that you create and register to record your	699	A watcher is a structure that you create and register to record your
476	interest in some event. For instance, if you want to wait for STDIN to	700	interest in some event. For instance, if you want to wait for STDIN to
…		…
543	The signal specified in the C<ev_signal> watcher has been received by a thread.	767	The signal specified in the C<ev_signal> watcher has been received by a thread.
544		768
545	=item C<EV_CHILD>	769	=item C<EV_CHILD>
546		770
547	The pid specified in the C<ev_child> watcher has received a status change.	771	The pid specified in the C<ev_child> watcher has received a status change.
		772
		773	=item C<EV_STAT>
		774
		775	The path specified in the C<ev_stat> watcher changed its attributes somehow.
548		776
549	=item C<EV_IDLE>	777	=item C<EV_IDLE>
550		778
551	The C<ev_idle> watcher has determined that you have nothing better to do.	779	The C<ev_idle> watcher has determined that you have nothing better to do.
552		780
…		…
560	received events. Callbacks of both watcher types can start and stop as	788	received events. Callbacks of both watcher types can start and stop as
561	many watchers as they want, and all of them will be taken into account	789	many watchers as they want, and all of them will be taken into account
562	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	790	(for example, a C<ev_prepare> watcher might start an idle watcher to keep
563	C<ev_loop> from blocking).	791	C<ev_loop> from blocking).
564		792
		793	=item C<EV_EMBED>
		794
		795	The embedded event loop specified in the C<ev_embed> watcher needs attention.
		796
		797	=item C<EV_FORK>
		798
		799	The event loop has been resumed in the child process after fork (see
		800	C<ev_fork>).
		801
		802	=item C<EV_ASYNC>
		803
		804	The given async watcher has been asynchronously notified (see C<ev_async>).
		805
565	=item C<EV_ERROR>	806	=item C<EV_ERROR>
566		807
567	An unspecified error has occured, the watcher has been stopped. This might	808	An unspecified error has occured, the watcher has been stopped. This might
568	happen because the watcher could not be properly started because libev	809	happen because the watcher could not be properly started because libev
569	ran out of memory, a file descriptor was found to be closed or any other	810	ran out of memory, a file descriptor was found to be closed or any other
…		…
576	with the error from read() or write(). This will not work in multithreaded	817	with the error from read() or write(). This will not work in multithreaded
577	programs, though, so beware.	818	programs, though, so beware.
578		819
579	=back	820	=back
580		821
581	=head2 SUMMARY OF GENERIC WATCHER FUNCTIONS	822	=head2 GENERIC WATCHER FUNCTIONS
582		823
583	In the following description, C<TYPE> stands for the watcher type,	824	In the following description, C<TYPE> stands for the watcher type,
584	e.g. C<timer> for C<ev_timer> watchers and C<io> for C<ev_io> watchers.	825	e.g. C<timer> for C<ev_timer> watchers and C<io> for C<ev_io> watchers.
585		826
586	=over 4	827	=over 4
…		…
595	which rolls both calls into one.	836	which rolls both calls into one.
596		837
597	You can reinitialise a watcher at any time as long as it has been stopped	838	You can reinitialise a watcher at any time as long as it has been stopped
598	(or never started) and there are no pending events outstanding.	839	(or never started) and there are no pending events outstanding.
599		840
600	The callbakc is always of type C<void (*)(ev_loop *loop, ev_TYPE *watcher,	841	The callback is always of type C<void (*)(ev_loop *loop, ev_TYPE *watcher,
601	int revents)>.	842	int revents)>.
602		843
603	=item C<ev_TYPE_set> (ev_TYPE *, [args])	844	=item C<ev_TYPE_set> (ev_TYPE *, [args])
604		845
605	This macro initialises the type-specific parts of a watcher. You need to	846	This macro initialises the type-specific parts of a watcher. You need to
…		…
640	=item bool ev_is_pending (ev_TYPE *watcher)	881	=item bool ev_is_pending (ev_TYPE *watcher)
641		882
642	Returns a true value iff the watcher is pending, (i.e. it has outstanding	883	Returns a true value iff the watcher is pending, (i.e. it has outstanding
643	events but its callback has not yet been invoked). As long as a watcher	884	events but its callback has not yet been invoked). As long as a watcher
644	is pending (but not active) you must not call an init function on it (but	885	is pending (but not active) you must not call an init function on it (but
645	C<ev_TYPE_set> is safe) and you must make sure the watcher is available to	886	C<ev_TYPE_set> is safe), you must not change its priority, and you must
646	libev (e.g. you cnanot C<free ()> it).	887	make sure the watcher is available to libev (e.g. you cannot C<free ()>
		888	it).
647		889
648	=item callback = ev_cb (ev_TYPE *watcher)	890	=item callback ev_cb (ev_TYPE *watcher)
649		891
650	Returns the callback currently set on the watcher.	892	Returns the callback currently set on the watcher.
651		893
652	=item ev_cb_set (ev_TYPE *watcher, callback)	894	=item ev_cb_set (ev_TYPE *watcher, callback)
653		895
654	Change the callback. You can change the callback at virtually any time	896	Change the callback. You can change the callback at virtually any time
655	(modulo threads).	897	(modulo threads).
		898
		899	=item ev_set_priority (ev_TYPE *watcher, priority)
		900
		901	=item int ev_priority (ev_TYPE *watcher)
		902
		903	Set and query the priority of the watcher. The priority is a small
		904	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
		905	(default: C<-2>). Pending watchers with higher priority will be invoked
		906	before watchers with lower priority, but priority will not keep watchers
		907	from being executed (except for C<ev_idle> watchers).
		908
		909	This means that priorities are I<only> used for ordering callback
		910	invocation after new events have been received. This is useful, for
		911	example, to reduce latency after idling, or more often, to bind two
		912	watchers on the same event and make sure one is called first.
		913
		914	If you need to suppress invocation when higher priority events are pending
		915	you need to look at C<ev_idle> watchers, which provide this functionality.
		916
		917	You I<must not> change the priority of a watcher as long as it is active or
		918	pending.
		919
		920	The default priority used by watchers when no priority has been set is
		921	always C<0>, which is supposed to not be too high and not be too low :).
		922
		923	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is
		924	fine, as long as you do not mind that the priority value you query might
		925	or might not have been adjusted to be within valid range.
		926
		927	=item ev_invoke (loop, ev_TYPE *watcher, int revents)
		928
		929	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
		930	C<loop> nor C<revents> need to be valid as long as the watcher callback
		931	can deal with that fact.
		932
		933	=item int ev_clear_pending (loop, ev_TYPE *watcher)
		934
		935	If the watcher is pending, this function returns clears its pending status
		936	and returns its C<revents> bitset (as if its callback was invoked). If the
		937	watcher isn't pending it does nothing and returns C<0>.
656		938
657	=back	939	=back
658		940
659		941
660	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	942	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
…		…
681	{	963	{
682	struct my_io *w = (struct my_io *)w_;	964	struct my_io *w = (struct my_io *)w_;
683	...	965	...
684	}	966	}
685		967
686	More interesting and less C-conformant ways of catsing your callback type	968	More interesting and less C-conformant ways of casting your callback type
687	have been omitted....	969	instead have been omitted.
		970
		971	Another common scenario is having some data structure with multiple
		972	watchers:
		973
		974	struct my_biggy
		975	{
		976	int some_data;
		977	ev_timer t1;
		978	ev_timer t2;
		979	}
		980
		981	In this case getting the pointer to C<my_biggy> is a bit more complicated,
		982	you need to use C<offsetof>:
		983
		984	#include <stddef.h>
		985
		986	static void
		987	t1_cb (EV_P_ struct ev_timer *w, int revents)
		988	{
		989	struct my_biggy big = (struct my_biggy *
		990	(((char *)w) - offsetof (struct my_biggy, t1));
		991	}
		992
		993	static void
		994	t2_cb (EV_P_ struct ev_timer *w, int revents)
		995	{
		996	struct my_biggy big = (struct my_biggy *
		997	(((char *)w) - offsetof (struct my_biggy, t2));
		998	}
688		999
689		1000
690	=head1 WATCHER TYPES	1001	=head1 WATCHER TYPES
691		1002
692	This section describes each watcher in detail, but will not repeat	1003	This section describes each watcher in detail, but will not repeat
693	information given in the last section.	1004	information given in the last section. Any initialisation/set macros,
		1005	functions and members specific to the watcher type are explained.
694		1006
		1007	Members are additionally marked with either I<[read-only]>, meaning that,
		1008	while the watcher is active, you can look at the member and expect some
		1009	sensible content, but you must not modify it (you can modify it while the
		1010	watcher is stopped to your hearts content), or I<[read-write]>, which
		1011	means you can expect it to have some sensible content while the watcher
		1012	is active, but you can also modify it. Modifying it may not do something
		1013	sensible or take immediate effect (or do anything at all), but libev will
		1014	not crash or malfunction in any way.
695		1015
		1016
696	=head2 C<ev_io> - is this file descriptor readable or writable	1017	=head2 C<ev_io> - is this file descriptor readable or writable?
697		1018
698	I/O watchers check whether a file descriptor is readable or writable	1019	I/O watchers check whether a file descriptor is readable or writable
699	in each iteration of the event loop (This behaviour is called	1020	in each iteration of the event loop, or, more precisely, when reading
700	level-triggering because you keep receiving events as long as the	1021	would not block the process and writing would at least be able to write
701	condition persists. Remember you can stop the watcher if you don't want to	1022	some data. This behaviour is called level-triggering because you keep
702	act on the event and neither want to receive future events).	1023	receiving events as long as the condition persists. Remember you can stop
		1024	the watcher if you don't want to act on the event and neither want to
		1025	receive future events.
703		1026
704	In general you can register as many read and/or write event watchers per	1027	In general you can register as many read and/or write event watchers per
705	fd as you want (as long as you don't confuse yourself). Setting all file	1028	fd as you want (as long as you don't confuse yourself). Setting all file
706	descriptors to non-blocking mode is also usually a good idea (but not	1029	descriptors to non-blocking mode is also usually a good idea (but not
707	required if you know what you are doing).	1030	required if you know what you are doing).
708		1031
709	You have to be careful with dup'ed file descriptors, though. Some backends
710	(the linux epoll backend is a notable example) cannot handle dup'ed file
711	descriptors correctly if you register interest in two or more fds pointing
712	to the same underlying file/socket etc. description (that is, they share
713	the same underlying "file open").
714
715	If you must do this, then force the use of a known-to-be-good backend	1032	If you must do this, then force the use of a known-to-be-good backend
716	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and	1033	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and
717	C<EVBACKEND_POLL>).	1034	C<EVBACKEND_POLL>).
718		1035
		1036	Another thing you have to watch out for is that it is quite easy to
		1037	receive "spurious" readyness notifications, that is your callback might
		1038	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
		1039	because there is no data. Not only are some backends known to create a
		1040	lot of those (for example solaris ports), it is very easy to get into
		1041	this situation even with a relatively standard program structure. Thus
		1042	it is best to always use non-blocking I/O: An extra C<read>(2) returning
		1043	C<EAGAIN> is far preferable to a program hanging until some data arrives.
		1044
		1045	If you cannot run the fd in non-blocking mode (for example you should not
		1046	play around with an Xlib connection), then you have to seperately re-test
		1047	whether a file descriptor is really ready with a known-to-be good interface
		1048	such as poll (fortunately in our Xlib example, Xlib already does this on
		1049	its own, so its quite safe to use).
		1050
		1051	=head3 The special problem of disappearing file descriptors
		1052
		1053	Some backends (e.g. kqueue, epoll) need to be told about closing a file
		1054	descriptor (either by calling C<close> explicitly or by any other means,
		1055	such as C<dup>). The reason is that you register interest in some file
		1056	descriptor, but when it goes away, the operating system will silently drop
		1057	this interest. If another file descriptor with the same number then is
		1058	registered with libev, there is no efficient way to see that this is, in
		1059	fact, a different file descriptor.
		1060
		1061	To avoid having to explicitly tell libev about such cases, libev follows
		1062	the following policy: Each time C<ev_io_set> is being called, libev
		1063	will assume that this is potentially a new file descriptor, otherwise
		1064	it is assumed that the file descriptor stays the same. That means that
		1065	you I<have> to call C<ev_io_set> (or C<ev_io_init>) when you change the
		1066	descriptor even if the file descriptor number itself did not change.
		1067
		1068	This is how one would do it normally anyway, the important point is that
		1069	the libev application should not optimise around libev but should leave
		1070	optimisations to libev.
		1071
		1072	=head3 The special problem of dup'ed file descriptors
		1073
		1074	Some backends (e.g. epoll), cannot register events for file descriptors,
		1075	but only events for the underlying file descriptions. That means when you
		1076	have C<dup ()>'ed file descriptors or weirder constellations, and register
		1077	events for them, only one file descriptor might actually receive events.
		1078
		1079	There is no workaround possible except not registering events
		1080	for potentially C<dup ()>'ed file descriptors, or to resort to
		1081	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
		1082
		1083	=head3 The special problem of fork
		1084
		1085	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit
		1086	useless behaviour. Libev fully supports fork, but needs to be told about
		1087	it in the child.
		1088
		1089	To support fork in your programs, you either have to call
		1090	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,
		1091	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or
		1092	C<EVBACKEND_POLL>.
		1093
		1094	=head3 The special problem of SIGPIPE
		1095
		1096	While not really specific to libev, it is easy to forget about SIGPIPE:
		1097	when reading from a pipe whose other end has been closed, your program
		1098	gets send a SIGPIPE, which, by default, aborts your program. For most
		1099	programs this is sensible behaviour, for daemons, this is usually
		1100	undesirable.
		1101
		1102	So when you encounter spurious, unexplained daemon exits, make sure you
		1103	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
		1104	somewhere, as that would have given you a big clue).
		1105
		1106
		1107	=head3 Watcher-Specific Functions
		1108
719	=over 4	1109	=over 4
720		1110
721	=item ev_io_init (ev_io *, callback, int fd, int events)	1111	=item ev_io_init (ev_io *, callback, int fd, int events)
722		1112
723	=item ev_io_set (ev_io *, int fd, int events)	1113	=item ev_io_set (ev_io *, int fd, int events)
724		1114
725	Configures an C<ev_io> watcher. The fd is the file descriptor to rceeive	1115	Configures an C<ev_io> watcher. The C<fd> is the file descriptor to
726	events for and events is either C<EV_READ>, C<EV_WRITE> or C<EV_READ |	1116	rceeive events for and events is either C<EV_READ>, C<EV_WRITE> or
727	EV_WRITE> to receive the given events.	1117	C<EV_READ | EV_WRITE> to receive the given events.
728		1118
729	Please note that most of the more scalable backend mechanisms (for example	1119	=item int fd [read-only]
730	epoll and solaris ports) can result in spurious readyness notifications	1120
731	for file descriptors, so you practically need to use non-blocking I/O (and	1121	The file descriptor being watched.
732	treat callback invocation as hint only), or retest separately with a safe	1122
733	interface before doing I/O (XLib can do this), or force the use of either	1123	=item int events [read-only]
734	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>, which don't suffer from this	1124
735	problem. Also note that it is quite easy to have your callback invoked	1125	The events being watched.
736	when the readyness condition is no longer valid even when employing
737	typical ways of handling events, so its a good idea to use non-blocking
738	I/O unconditionally.
739		1126
740	=back	1127	=back
741		1128
		1129	=head3 Examples
		1130
742	Example: call C<stdin_readable_cb> when STDIN_FILENO has become, well	1131	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well
743	readable, but only once. Since it is likely line-buffered, you could	1132	readable, but only once. Since it is likely line-buffered, you could
744	attempt to read a whole line in the callback:	1133	attempt to read a whole line in the callback.
745		1134
746	static void	1135	static void
747	stdin_readable_cb (struct ev_loop *loop, struct ev_io *w, int revents)	1136	stdin_readable_cb (struct ev_loop *loop, struct ev_io *w, int revents)
748	{	1137	{
749	ev_io_stop (loop, w);	1138	ev_io_stop (loop, w);
…		…
756	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);	1145	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
757	ev_io_start (loop, &stdin_readable);	1146	ev_io_start (loop, &stdin_readable);
758	ev_loop (loop, 0);	1147	ev_loop (loop, 0);
759		1148
760		1149
761	=head2 C<ev_timer> - relative and optionally recurring timeouts	1150	=head2 C<ev_timer> - relative and optionally repeating timeouts
762		1151
763	Timer watchers are simple relative timers that generate an event after a	1152	Timer watchers are simple relative timers that generate an event after a
764	given time, and optionally repeating in regular intervals after that.	1153	given time, and optionally repeating in regular intervals after that.
765		1154
766	The timers are based on real time, that is, if you register an event that	1155	The timers are based on real time, that is, if you register an event that
…		…
779		1168
780	The callback is guarenteed to be invoked only when its timeout has passed,	1169	The callback is guarenteed to be invoked only when its timeout has passed,
781	but if multiple timers become ready during the same loop iteration then	1170	but if multiple timers become ready during the same loop iteration then
782	order of execution is undefined.	1171	order of execution is undefined.
783		1172
		1173	=head3 Watcher-Specific Functions and Data Members
		1174
784	=over 4	1175	=over 4
785		1176
786	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	1177	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
787		1178
788	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)	1179	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)
…		…
796	configure a timer to trigger every 10 seconds, then it will trigger at	1187	configure a timer to trigger every 10 seconds, then it will trigger at
797	exactly 10 second intervals. If, however, your program cannot keep up with	1188	exactly 10 second intervals. If, however, your program cannot keep up with
798	the timer (because it takes longer than those 10 seconds to do stuff) the	1189	the timer (because it takes longer than those 10 seconds to do stuff) the
799	timer will not fire more than once per event loop iteration.	1190	timer will not fire more than once per event loop iteration.
800		1191
801	=item ev_timer_again (loop)	1192	=item ev_timer_again (loop, ev_timer *)
802		1193
803	This will act as if the timer timed out and restart it again if it is	1194	This will act as if the timer timed out and restart it again if it is
804	repeating. The exact semantics are:	1195	repeating. The exact semantics are:
805		1196
		1197	If the timer is pending, its pending status is cleared.
		1198
806	If the timer is started but nonrepeating, stop it.	1199	If the timer is started but nonrepeating, stop it (as if it timed out).
807		1200
808	If the timer is repeating, either start it if necessary (with the repeat	1201	If the timer is repeating, either start it if necessary (with the
809	value), or reset the running timer to the repeat value.	1202	C<repeat> value), or reset the running timer to the C<repeat> value.
810		1203
811	This sounds a bit complicated, but here is a useful and typical	1204	This sounds a bit complicated, but here is a useful and typical
812	example: Imagine you have a tcp connection and you want a so-called idle	1205	example: Imagine you have a tcp connection and you want a so-called idle
813	timeout, that is, you want to be called when there have been, say, 60	1206	timeout, that is, you want to be called when there have been, say, 60
814	seconds of inactivity on the socket. The easiest way to do this is to	1207	seconds of inactivity on the socket. The easiest way to do this is to
815	configure an C<ev_timer> with after=repeat=60 and calling ev_timer_again each	1208	configure an C<ev_timer> with a C<repeat> value of C<60> and then call
816	time you successfully read or write some data. If you go into an idle	1209	C<ev_timer_again> each time you successfully read or write some data. If
817	state where you do not expect data to travel on the socket, you can stop	1210	you go into an idle state where you do not expect data to travel on the
818	the timer, and again will automatically restart it if need be.	1211	socket, you can C<ev_timer_stop> the timer, and C<ev_timer_again> will
		1212	automatically restart it if need be.
		1213
		1214	That means you can ignore the C<after> value and C<ev_timer_start>
		1215	altogether and only ever use the C<repeat> value and C<ev_timer_again>:
		1216
		1217	ev_timer_init (timer, callback, 0., 5.);
		1218	ev_timer_again (loop, timer);
		1219	...
		1220	timer->again = 17.;
		1221	ev_timer_again (loop, timer);
		1222	...
		1223	timer->again = 10.;
		1224	ev_timer_again (loop, timer);
		1225
		1226	This is more slightly efficient then stopping/starting the timer each time
		1227	you want to modify its timeout value.
		1228
		1229	=item ev_tstamp repeat [read-write]
		1230
		1231	The current C<repeat> value. Will be used each time the watcher times out
		1232	or C<ev_timer_again> is called and determines the next timeout (if any),
		1233	which is also when any modifications are taken into account.
819		1234
820	=back	1235	=back
821		1236
		1237	=head3 Examples
		1238
822	Example: create a timer that fires after 60 seconds.	1239	Example: Create a timer that fires after 60 seconds.
823		1240
824	static void	1241	static void
825	one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)	1242	one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)
826	{	1243	{
827	.. one minute over, w is actually stopped right here	1244	.. one minute over, w is actually stopped right here
…		…
829		1246
830	struct ev_timer mytimer;	1247	struct ev_timer mytimer;
831	ev_timer_init (&mytimer, one_minute_cb, 60., 0.);	1248	ev_timer_init (&mytimer, one_minute_cb, 60., 0.);
832	ev_timer_start (loop, &mytimer);	1249	ev_timer_start (loop, &mytimer);
833		1250
834	Example: create a timeout timer that times out after 10 seconds of	1251	Example: Create a timeout timer that times out after 10 seconds of
835	inactivity.	1252	inactivity.
836		1253
837	static void	1254	static void
838	timeout_cb (struct ev_loop *loop, struct ev_timer *w, int revents)	1255	timeout_cb (struct ev_loop *loop, struct ev_timer *w, int revents)
839	{	1256	{
…		…
848	// and in some piece of code that gets executed on any "activity":	1265	// and in some piece of code that gets executed on any "activity":
849	// reset the timeout to start ticking again at 10 seconds	1266	// reset the timeout to start ticking again at 10 seconds
850	ev_timer_again (&mytimer);	1267	ev_timer_again (&mytimer);
851		1268
852		1269
853	=head2 C<ev_periodic> - to cron or not to cron	1270	=head2 C<ev_periodic> - to cron or not to cron?
854		1271
855	Periodic watchers are also timers of a kind, but they are very versatile	1272	Periodic watchers are also timers of a kind, but they are very versatile
856	(and unfortunately a bit complex).	1273	(and unfortunately a bit complex).
857		1274
858	Unlike C<ev_timer>'s, they are not based on real time (or relative time)	1275	Unlike C<ev_timer>'s, they are not based on real time (or relative time)
859	but on wallclock time (absolute time). You can tell a periodic watcher	1276	but on wallclock time (absolute time). You can tell a periodic watcher
860	to trigger "at" some specific point in time. For example, if you tell a	1277	to trigger "at" some specific point in time. For example, if you tell a
861	periodic watcher to trigger in 10 seconds (by specifiying e.g. C<ev_now ()	1278	periodic watcher to trigger in 10 seconds (by specifiying e.g. C<ev_now ()
862	+ 10.>) and then reset your system clock to the last year, then it will	1279	+ 10.>) and then reset your system clock to the last year, then it will
863	take a year to trigger the event (unlike an C<ev_timer>, which would trigger	1280	take a year to trigger the event (unlike an C<ev_timer>, which would trigger
864	roughly 10 seconds later and of course not if you reset your system time	1281	roughly 10 seconds later).
865	again).
866		1282
867	They can also be used to implement vastly more complex timers, such as	1283	They can also be used to implement vastly more complex timers, such as
868	triggering an event on eahc midnight, local time.	1284	triggering an event on each midnight, local time or other, complicated,
		1285	rules.
869		1286
870	As with timers, the callback is guarenteed to be invoked only when the	1287	As with timers, the callback is guarenteed to be invoked only when the
871	time (C<at>) has been passed, but if multiple periodic timers become ready	1288	time (C<at>) has been passed, but if multiple periodic timers become ready
872	during the same loop iteration then order of execution is undefined.	1289	during the same loop iteration then order of execution is undefined.
873		1290
		1291	=head3 Watcher-Specific Functions and Data Members
		1292
874	=over 4	1293	=over 4
875		1294
876	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)	1295	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)
877		1296
878	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)	1297	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)
…		…
880	Lots of arguments, lets sort it out... There are basically three modes of	1299	Lots of arguments, lets sort it out... There are basically three modes of
881	operation, and we will explain them from simplest to complex:	1300	operation, and we will explain them from simplest to complex:
882		1301
883	=over 4	1302	=over 4
884		1303
885	=item * absolute timer (interval = reschedule_cb = 0)	1304	=item * absolute timer (at = time, interval = reschedule_cb = 0)
886		1305
887	In this configuration the watcher triggers an event at the wallclock time	1306	In this configuration the watcher triggers an event at the wallclock time
888	C<at> and doesn't repeat. It will not adjust when a time jump occurs,	1307	C<at> and doesn't repeat. It will not adjust when a time jump occurs,
889	that is, if it is to be run at January 1st 2011 then it will run when the	1308	that is, if it is to be run at January 1st 2011 then it will run when the
890	system time reaches or surpasses this time.	1309	system time reaches or surpasses this time.
891		1310
892	=item * non-repeating interval timer (interval > 0, reschedule_cb = 0)	1311	=item * repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)
893		1312
894	In this mode the watcher will always be scheduled to time out at the next	1313	In this mode the watcher will always be scheduled to time out at the next
895	C<at + N * interval> time (for some integer N) and then repeat, regardless	1314	C<at + N * interval> time (for some integer N, which can also be negative)
896	of any time jumps.	1315	and then repeat, regardless of any time jumps.
897		1316
898	This can be used to create timers that do not drift with respect to system	1317	This can be used to create timers that do not drift with respect to system
899	time:	1318	time:
900		1319
901	ev_periodic_set (&periodic, 0., 3600., 0);	1320	ev_periodic_set (&periodic, 0., 3600., 0);
…		…
907		1326
908	Another way to think about it (for the mathematically inclined) is that	1327	Another way to think about it (for the mathematically inclined) is that
909	C<ev_periodic> will try to run the callback in this mode at the next possible	1328	C<ev_periodic> will try to run the callback in this mode at the next possible
910	time where C<time = at (mod interval)>, regardless of any time jumps.	1329	time where C<time = at (mod interval)>, regardless of any time jumps.
911		1330
		1331	For numerical stability it is preferable that the C<at> value is near
		1332	C<ev_now ()> (the current time), but there is no range requirement for
		1333	this value.
		1334
912	=item * manual reschedule mode (reschedule_cb = callback)	1335	=item * manual reschedule mode (at and interval ignored, reschedule_cb = callback)
913		1336
914	In this mode the values for C<interval> and C<at> are both being	1337	In this mode the values for C<interval> and C<at> are both being
915	ignored. Instead, each time the periodic watcher gets scheduled, the	1338	ignored. Instead, each time the periodic watcher gets scheduled, the
916	reschedule callback will be called with the watcher as first, and the	1339	reschedule callback will be called with the watcher as first, and the
917	current time as second argument.	1340	current time as second argument.
918		1341
919	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,	1342	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,
920	ever, or make any event loop modifications>. If you need to stop it,	1343	ever, or make any event loop modifications>. If you need to stop it,
921	return C<now + 1e30> (or so, fudge fudge) and stop it afterwards (e.g. by	1344	return C<now + 1e30> (or so, fudge fudge) and stop it afterwards (e.g. by
922	starting a prepare watcher).	1345	starting an C<ev_prepare> watcher, which is legal).
923		1346
924	Its prototype is C<ev_tstamp (*reschedule_cb)(struct ev_periodic *w,	1347	Its prototype is C<ev_tstamp (*reschedule_cb)(struct ev_periodic *w,
925	ev_tstamp now)>, e.g.:	1348	ev_tstamp now)>, e.g.:
926		1349
927	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)	1350	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)
…		…
950	Simply stops and restarts the periodic watcher again. This is only useful	1373	Simply stops and restarts the periodic watcher again. This is only useful
951	when you changed some parameters or the reschedule callback would return	1374	when you changed some parameters or the reschedule callback would return
952	a different time than the last time it was called (e.g. in a crond like	1375	a different time than the last time it was called (e.g. in a crond like
953	program when the crontabs have changed).	1376	program when the crontabs have changed).
954		1377
		1378	=item ev_tstamp offset [read-write]
		1379
		1380	When repeating, this contains the offset value, otherwise this is the
		1381	absolute point in time (the C<at> value passed to C<ev_periodic_set>).
		1382
		1383	Can be modified any time, but changes only take effect when the periodic
		1384	timer fires or C<ev_periodic_again> is being called.
		1385
		1386	=item ev_tstamp interval [read-write]
		1387
		1388	The current interval value. Can be modified any time, but changes only
		1389	take effect when the periodic timer fires or C<ev_periodic_again> is being
		1390	called.
		1391
		1392	=item ev_tstamp (*reschedule_cb)(struct ev_periodic *w, ev_tstamp now) [read-write]
		1393
		1394	The current reschedule callback, or C<0>, if this functionality is
		1395	switched off. Can be changed any time, but changes only take effect when
		1396	the periodic timer fires or C<ev_periodic_again> is being called.
		1397
		1398	=item ev_tstamp at [read-only]
		1399
		1400	When active, contains the absolute time that the watcher is supposed to
		1401	trigger next.
		1402
955	=back	1403	=back
956		1404
		1405	=head3 Examples
		1406
957	Example: call a callback every hour, or, more precisely, whenever the	1407	Example: Call a callback every hour, or, more precisely, whenever the
958	system clock is divisible by 3600. The callback invocation times have	1408	system clock is divisible by 3600. The callback invocation times have
959	potentially a lot of jittering, but good long-term stability.	1409	potentially a lot of jittering, but good long-term stability.
960		1410
961	static void	1411	static void
962	clock_cb (struct ev_loop *loop, struct ev_io *w, int revents)	1412	clock_cb (struct ev_loop *loop, struct ev_io *w, int revents)
…		…
966		1416
967	struct ev_periodic hourly_tick;	1417	struct ev_periodic hourly_tick;
968	ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);	1418	ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);
969	ev_periodic_start (loop, &hourly_tick);	1419	ev_periodic_start (loop, &hourly_tick);
970		1420
971	Example: the same as above, but use a reschedule callback to do it:	1421	Example: The same as above, but use a reschedule callback to do it:
972		1422
973	#include <math.h>	1423	#include <math.h>
974		1424
975	static ev_tstamp	1425	static ev_tstamp
976	my_scheduler_cb (struct ev_periodic *w, ev_tstamp now)	1426	my_scheduler_cb (struct ev_periodic *w, ev_tstamp now)
…		…
978	return fmod (now, 3600.) + 3600.;	1428	return fmod (now, 3600.) + 3600.;
979	}	1429	}
980		1430
981	ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);	1431	ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);
982		1432
983	Example: call a callback every hour, starting now:	1433	Example: Call a callback every hour, starting now:
984		1434
985	struct ev_periodic hourly_tick;	1435	struct ev_periodic hourly_tick;
986	ev_periodic_init (&hourly_tick, clock_cb,	1436	ev_periodic_init (&hourly_tick, clock_cb,
987	fmod (ev_now (loop), 3600.), 3600., 0);	1437	fmod (ev_now (loop), 3600.), 3600., 0);
988	ev_periodic_start (loop, &hourly_tick);	1438	ev_periodic_start (loop, &hourly_tick);
989		1439
990		1440
991	=head2 C<ev_signal> - signal me when a signal gets signalled	1441	=head2 C<ev_signal> - signal me when a signal gets signalled!
992		1442
993	Signal watchers will trigger an event when the process receives a specific	1443	Signal watchers will trigger an event when the process receives a specific
994	signal one or more times. Even though signals are very asynchronous, libev	1444	signal one or more times. Even though signals are very asynchronous, libev
995	will try it's best to deliver signals synchronously, i.e. as part of the	1445	will try it's best to deliver signals synchronously, i.e. as part of the
996	normal event processing, like any other event.	1446	normal event processing, like any other event.
…		…
1000	with the kernel (thus it coexists with your own signal handlers as long	1450	with the kernel (thus it coexists with your own signal handlers as long
1001	as you don't register any with libev). Similarly, when the last signal	1451	as you don't register any with libev). Similarly, when the last signal
1002	watcher for a signal is stopped libev will reset the signal handler to	1452	watcher for a signal is stopped libev will reset the signal handler to
1003	SIG_DFL (regardless of what it was set to before).	1453	SIG_DFL (regardless of what it was set to before).
1004		1454
		1455	If possible and supported, libev will install its handlers with
		1456	C<SA_RESTART> behaviour enabled, so syscalls should not be unduly
		1457	interrupted. If you have a problem with syscalls getting interrupted by
		1458	signals you can block all signals in an C<ev_check> watcher and unblock
		1459	them in an C<ev_prepare> watcher.
		1460
		1461	=head3 Watcher-Specific Functions and Data Members
		1462
1005	=over 4	1463	=over 4
1006		1464
1007	=item ev_signal_init (ev_signal *, callback, int signum)	1465	=item ev_signal_init (ev_signal *, callback, int signum)
1008		1466
1009	=item ev_signal_set (ev_signal *, int signum)	1467	=item ev_signal_set (ev_signal *, int signum)
1010		1468
1011	Configures the watcher to trigger on the given signal number (usually one	1469	Configures the watcher to trigger on the given signal number (usually one
1012	of the C<SIGxxx> constants).	1470	of the C<SIGxxx> constants).
1013		1471
		1472	=item int signum [read-only]
		1473
		1474	The signal the watcher watches out for.
		1475
1014	=back	1476	=back
1015		1477
		1478	=head3 Examples
1016		1479
		1480	Example: Try to exit cleanly on SIGINT and SIGTERM.
		1481
		1482	static void
		1483	sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)
		1484	{
		1485	ev_unloop (loop, EVUNLOOP_ALL);
		1486	}
		1487
		1488	struct ev_signal signal_watcher;
		1489	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
		1490	ev_signal_start (loop, &sigint_cb);
		1491
		1492
1017	=head2 C<ev_child> - wait for pid status changes	1493	=head2 C<ev_child> - watch out for process status changes
1018		1494
1019	Child watchers trigger when your process receives a SIGCHLD in response to	1495	Child watchers trigger when your process receives a SIGCHLD in response to
1020	some child status changes (most typically when a child of yours dies).	1496	some child status changes (most typically when a child of yours dies). It
		1497	is permissible to install a child watcher I<after> the child has been
		1498	forked (which implies it might have already exited), as long as the event
		1499	loop isn't entered (or is continued from a watcher).
		1500
		1501	Only the default event loop is capable of handling signals, and therefore
		1502	you can only rgeister child watchers in the default event loop.
		1503
		1504	=head3 Process Interaction
		1505
		1506	Libev grabs C<SIGCHLD> as soon as the default event loop is
		1507	initialised. This is necessary to guarantee proper behaviour even if
		1508	the first child watcher is started after the child exits. The occurance
		1509	of C<SIGCHLD> is recorded asynchronously, but child reaping is done
		1510	synchronously as part of the event loop processing. Libev always reaps all
		1511	children, even ones not watched.
		1512
		1513	=head3 Overriding the Built-In Processing
		1514
		1515	Libev offers no special support for overriding the built-in child
		1516	processing, but if your application collides with libev's default child
		1517	handler, you can override it easily by installing your own handler for
		1518	C<SIGCHLD> after initialising the default loop, and making sure the
		1519	default loop never gets destroyed. You are encouraged, however, to use an
		1520	event-based approach to child reaping and thus use libev's support for
		1521	that, so other libev users can use C<ev_child> watchers freely.
		1522
		1523	=head3 Watcher-Specific Functions and Data Members
1021		1524
1022	=over 4	1525	=over 4
1023		1526
1024	=item ev_child_init (ev_child *, callback, int pid)	1527	=item ev_child_init (ev_child *, callback, int pid, int trace)
1025		1528
1026	=item ev_child_set (ev_child *, int pid)	1529	=item ev_child_set (ev_child *, int pid, int trace)
1027		1530
1028	Configures the watcher to wait for status changes of process C<pid> (or	1531	Configures the watcher to wait for status changes of process C<pid> (or
1029	I<any> process if C<pid> is specified as C<0>). The callback can look	1532	I<any> process if C<pid> is specified as C<0>). The callback can look
1030	at the C<rstatus> member of the C<ev_child> watcher structure to see	1533	at the C<rstatus> member of the C<ev_child> watcher structure to see
1031	the status word (use the macros from C<sys/wait.h> and see your systems	1534	the status word (use the macros from C<sys/wait.h> and see your systems
1032	C<waitpid> documentation). The C<rpid> member contains the pid of the	1535	C<waitpid> documentation). The C<rpid> member contains the pid of the
1033	process causing the status change.	1536	process causing the status change. C<trace> must be either C<0> (only
		1537	activate the watcher when the process terminates) or C<1> (additionally
		1538	activate the watcher when the process is stopped or continued).
		1539
		1540	=item int pid [read-only]
		1541
		1542	The process id this watcher watches out for, or C<0>, meaning any process id.
		1543
		1544	=item int rpid [read-write]
		1545
		1546	The process id that detected a status change.
		1547
		1548	=item int rstatus [read-write]
		1549
		1550	The process exit/trace status caused by C<rpid> (see your systems
		1551	C<waitpid> and C<sys/wait.h> documentation for details).
1034		1552
1035	=back	1553	=back
1036		1554
1037	Example: try to exit cleanly on SIGINT and SIGTERM.	1555	=head3 Examples
		1556
		1557	Example: C<fork()> a new process and install a child handler to wait for
		1558	its completion.
		1559
		1560	ev_child cw;
1038		1561
1039	static void	1562	static void
1040	sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)	1563	child_cb (EV_P_ struct ev_child *w, int revents)
1041	{	1564	{
1042	ev_unloop (loop, EVUNLOOP_ALL);	1565	ev_child_stop (EV_A_ w);
		1566	printf ("process %d exited with status %x\n", w->rpid, w->rstatus);
1043	}	1567	}
1044		1568
1045	struct ev_signal signal_watcher;	1569	pid_t pid = fork ();
1046	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
1047	ev_signal_start (loop, &sigint_cb);
1048		1570
		1571	if (pid < 0)
		1572	// error
		1573	else if (pid == 0)
		1574	{
		1575	// the forked child executes here
		1576	exit (1);
		1577	}
		1578	else
		1579	{
		1580	ev_child_init (&cw, child_cb, pid, 0);
		1581	ev_child_start (EV_DEFAULT_ &cw);
		1582	}
1049		1583
		1584
		1585	=head2 C<ev_stat> - did the file attributes just change?
		1586
		1587	This watches a filesystem path for attribute changes. That is, it calls
		1588	C<stat> regularly (or when the OS says it changed) and sees if it changed
		1589	compared to the last time, invoking the callback if it did.
		1590
		1591	The path does not need to exist: changing from "path exists" to "path does
		1592	not exist" is a status change like any other. The condition "path does
		1593	not exist" is signified by the C<st_nlink> field being zero (which is
		1594	otherwise always forced to be at least one) and all the other fields of
		1595	the stat buffer having unspecified contents.
		1596
		1597	The path I<should> be absolute and I<must not> end in a slash. If it is
		1598	relative and your working directory changes, the behaviour is undefined.
		1599
		1600	Since there is no standard to do this, the portable implementation simply
		1601	calls C<stat (2)> regularly on the path to see if it changed somehow. You
		1602	can specify a recommended polling interval for this case. If you specify
		1603	a polling interval of C<0> (highly recommended!) then a I<suitable,
		1604	unspecified default> value will be used (which you can expect to be around
		1605	five seconds, although this might change dynamically). Libev will also
		1606	impose a minimum interval which is currently around C<0.1>, but thats
		1607	usually overkill.
		1608
		1609	This watcher type is not meant for massive numbers of stat watchers,
		1610	as even with OS-supported change notifications, this can be
		1611	resource-intensive.
		1612
		1613	At the time of this writing, only the Linux inotify interface is
		1614	implemented (implementing kqueue support is left as an exercise for the
		1615	reader). Inotify will be used to give hints only and should not change the
		1616	semantics of C<ev_stat> watchers, which means that libev sometimes needs
		1617	to fall back to regular polling again even with inotify, but changes are
		1618	usually detected immediately, and if the file exists there will be no
		1619	polling.
		1620
		1621	=head3 ABI Issues (Largefile Support)
		1622
		1623	Libev by default (unless the user overrides this) uses the default
		1624	compilation environment, which means that on systems with optionally
		1625	disabled large file support, you get the 32 bit version of the stat
		1626	structure. When using the library from programs that change the ABI to
		1627	use 64 bit file offsets the programs will fail. In that case you have to
		1628	compile libev with the same flags to get binary compatibility. This is
		1629	obviously the case with any flags that change the ABI, but the problem is
		1630	most noticably with ev_stat and largefile support.
		1631
		1632	=head3 Inotify
		1633
		1634	When C<inotify (7)> support has been compiled into libev (generally only
		1635	available on Linux) and present at runtime, it will be used to speed up
		1636	change detection where possible. The inotify descriptor will be created lazily
		1637	when the first C<ev_stat> watcher is being started.
		1638
		1639	Inotify presence does not change the semantics of C<ev_stat> watchers
		1640	except that changes might be detected earlier, and in some cases, to avoid
		1641	making regular C<stat> calls. Even in the presence of inotify support
		1642	there are many cases where libev has to resort to regular C<stat> polling.
		1643
		1644	(There is no support for kqueue, as apparently it cannot be used to
		1645	implement this functionality, due to the requirement of having a file
		1646	descriptor open on the object at all times).
		1647
		1648	=head3 The special problem of stat time resolution
		1649
		1650	The C<stat ()> syscall only supports full-second resolution portably, and
		1651	even on systems where the resolution is higher, many filesystems still
		1652	only support whole seconds.
		1653
		1654	That means that, if the time is the only thing that changes, you might
		1655	miss updates: on the first update, C<ev_stat> detects a change and calls
		1656	your callback, which does something. When there is another update within
		1657	the same second, C<ev_stat> will be unable to detect it.
		1658
		1659	The solution to this is to delay acting on a change for a second (or till
		1660	the next second boundary), using a roughly one-second delay C<ev_timer>
		1661	(C<ev_timer_set (w, 0., 1.01); ev_timer_again (loop, w)>). The C<.01>
		1662	is added to work around small timing inconsistencies of some operating
		1663	systems.
		1664
		1665	=head3 Watcher-Specific Functions and Data Members
		1666
		1667	=over 4
		1668
		1669	=item ev_stat_init (ev_stat *, callback, const char *path, ev_tstamp interval)
		1670
		1671	=item ev_stat_set (ev_stat *, const char *path, ev_tstamp interval)
		1672
		1673	Configures the watcher to wait for status changes of the given
		1674	C<path>. The C<interval> is a hint on how quickly a change is expected to
		1675	be detected and should normally be specified as C<0> to let libev choose
		1676	a suitable value. The memory pointed to by C<path> must point to the same
		1677	path for as long as the watcher is active.
		1678
		1679	The callback will be receive C<EV_STAT> when a change was detected,
		1680	relative to the attributes at the time the watcher was started (or the
		1681	last change was detected).
		1682
		1683	=item ev_stat_stat (loop, ev_stat *)
		1684
		1685	Updates the stat buffer immediately with new values. If you change the
		1686	watched path in your callback, you could call this fucntion to avoid
		1687	detecting this change (while introducing a race condition). Can also be
		1688	useful simply to find out the new values.
		1689
		1690	=item ev_statdata attr [read-only]
		1691
		1692	The most-recently detected attributes of the file. Although the type is of
		1693	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types
		1694	suitable for your system. If the C<st_nlink> member is C<0>, then there
		1695	was some error while C<stat>ing the file.
		1696
		1697	=item ev_statdata prev [read-only]
		1698
		1699	The previous attributes of the file. The callback gets invoked whenever
		1700	C<prev> != C<attr>.
		1701
		1702	=item ev_tstamp interval [read-only]
		1703
		1704	The specified interval.
		1705
		1706	=item const char *path [read-only]
		1707
		1708	The filesystem path that is being watched.
		1709
		1710	=back
		1711
		1712	=head3 Examples
		1713
		1714	Example: Watch C</etc/passwd> for attribute changes.
		1715
		1716	static void
		1717	passwd_cb (struct ev_loop *loop, ev_stat *w, int revents)
		1718	{
		1719	/* /etc/passwd changed in some way */
		1720	if (w->attr.st_nlink)
		1721	{
		1722	printf ("passwd current size %ld\n", (long)w->attr.st_size);
		1723	printf ("passwd current atime %ld\n", (long)w->attr.st_mtime);
		1724	printf ("passwd current mtime %ld\n", (long)w->attr.st_mtime);
		1725	}
		1726	else
		1727	/* you shalt not abuse printf for puts */
		1728	puts ("wow, /etc/passwd is not there, expect problems. "
		1729	"if this is windows, they already arrived\n");
		1730	}
		1731
		1732	...
		1733	ev_stat passwd;
		1734
		1735	ev_stat_init (&passwd, passwd_cb, "/etc/passwd", 0.);
		1736	ev_stat_start (loop, &passwd);
		1737
		1738	Example: Like above, but additionally use a one-second delay so we do not
		1739	miss updates (however, frequent updates will delay processing, too, so
		1740	one might do the work both on C<ev_stat> callback invocation I<and> on
		1741	C<ev_timer> callback invocation).
		1742
		1743	static ev_stat passwd;
		1744	static ev_timer timer;
		1745
		1746	static void
		1747	timer_cb (EV_P_ ev_timer *w, int revents)
		1748	{
		1749	ev_timer_stop (EV_A_ w);
		1750
		1751	/* now it's one second after the most recent passwd change */
		1752	}
		1753
		1754	static void
		1755	stat_cb (EV_P_ ev_stat *w, int revents)
		1756	{
		1757	/* reset the one-second timer */
		1758	ev_timer_again (EV_A_ &timer);
		1759	}
		1760
		1761	...
		1762	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);
		1763	ev_stat_start (loop, &passwd);
		1764	ev_timer_init (&timer, timer_cb, 0., 1.01);
		1765
		1766
1050	=head2 C<ev_idle> - when you've got nothing better to do	1767	=head2 C<ev_idle> - when you've got nothing better to do...
1051		1768
1052	Idle watchers trigger events when there are no other events are pending	1769	Idle watchers trigger events when no other events of the same or higher
1053	(prepare, check and other idle watchers do not count). That is, as long	1770	priority are pending (prepare, check and other idle watchers do not
1054	as your process is busy handling sockets or timeouts (or even signals,	1771	count).
1055	imagine) it will not be triggered. But when your process is idle all idle	1772
1056	watchers are being called again and again, once per event loop iteration -	1773	That is, as long as your process is busy handling sockets or timeouts
		1774	(or even signals, imagine) of the same or higher priority it will not be
		1775	triggered. But when your process is idle (or only lower-priority watchers
		1776	are pending), the idle watchers are being called once per event loop
1057	until stopped, that is, or your process receives more events and becomes	1777	iteration - until stopped, that is, or your process receives more events
1058	busy.	1778	and becomes busy again with higher priority stuff.
1059		1779
1060	The most noteworthy effect is that as long as any idle watchers are	1780	The most noteworthy effect is that as long as any idle watchers are
1061	active, the process will not block when waiting for new events.	1781	active, the process will not block when waiting for new events.
1062		1782
1063	Apart from keeping your process non-blocking (which is a useful	1783	Apart from keeping your process non-blocking (which is a useful
1064	effect on its own sometimes), idle watchers are a good place to do	1784	effect on its own sometimes), idle watchers are a good place to do
1065	"pseudo-background processing", or delay processing stuff to after the	1785	"pseudo-background processing", or delay processing stuff to after the
1066	event loop has handled all outstanding events.	1786	event loop has handled all outstanding events.
1067		1787
		1788	=head3 Watcher-Specific Functions and Data Members
		1789
1068	=over 4	1790	=over 4
1069		1791
1070	=item ev_idle_init (ev_signal *, callback)	1792	=item ev_idle_init (ev_signal *, callback)
1071		1793
1072	Initialises and configures the idle watcher - it has no parameters of any	1794	Initialises and configures the idle watcher - it has no parameters of any
1073	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,	1795	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,
1074	believe me.	1796	believe me.
1075		1797
1076	=back	1798	=back
1077		1799
		1800	=head3 Examples
		1801
1078	Example: dynamically allocate an C<ev_idle>, start it, and in the	1802	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the
1079	callback, free it. Alos, use no error checking, as usual.	1803	callback, free it. Also, use no error checking, as usual.
1080		1804
1081	static void	1805	static void
1082	idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)	1806	idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)
1083	{	1807	{
1084	free (w);	1808	free (w);
1085	// now do something you wanted to do when the program has	1809	// now do something you wanted to do when the program has
1086	// no longer asnything immediate to do.	1810	// no longer anything immediate to do.
1087	}	1811	}
1088		1812
1089	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));	1813	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));
1090	ev_idle_init (idle_watcher, idle_cb);	1814	ev_idle_init (idle_watcher, idle_cb);
1091	ev_idle_start (loop, idle_cb);	1815	ev_idle_start (loop, idle_cb);
1092		1816
1093		1817
1094	=head2 C<ev_prepare> and C<ev_check> - customise your event loop	1818	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!
1095		1819
1096	Prepare and check watchers are usually (but not always) used in tandem:	1820	Prepare and check watchers are usually (but not always) used in tandem:
1097	prepare watchers get invoked before the process blocks and check watchers	1821	prepare watchers get invoked before the process blocks and check watchers
1098	afterwards.	1822	afterwards.
1099		1823
		1824	You I<must not> call C<ev_loop> or similar functions that enter
		1825	the current event loop from either C<ev_prepare> or C<ev_check>
		1826	watchers. Other loops than the current one are fine, however. The
		1827	rationale behind this is that you do not need to check for recursion in
		1828	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,
		1829	C<ev_check> so if you have one watcher of each kind they will always be
		1830	called in pairs bracketing the blocking call.
		1831
1100	Their main purpose is to integrate other event mechanisms into libev and	1832	Their main purpose is to integrate other event mechanisms into libev and
1101	their use is somewhat advanced. This could be used, for example, to track	1833	their use is somewhat advanced. This could be used, for example, to track
1102	variable changes, implement your own watchers, integrate net-snmp or a	1834	variable changes, implement your own watchers, integrate net-snmp or a
1103	coroutine library and lots more.	1835	coroutine library and lots more. They are also occasionally useful if
		1836	you cache some data and want to flush it before blocking (for example,
		1837	in X programs you might want to do an C<XFlush ()> in an C<ev_prepare>
		1838	watcher).
1104		1839
1105	This is done by examining in each prepare call which file descriptors need	1840	This is done by examining in each prepare call which file descriptors need
1106	to be watched by the other library, registering C<ev_io> watchers for	1841	to be watched by the other library, registering C<ev_io> watchers for
1107	them and starting an C<ev_timer> watcher for any timeouts (many libraries	1842	them and starting an C<ev_timer> watcher for any timeouts (many libraries
1108	provide just this functionality). Then, in the check watcher you check for	1843	provide just this functionality). Then, in the check watcher you check for
…		…
1118	with priority higher than or equal to the event loop and one coroutine	1853	with priority higher than or equal to the event loop and one coroutine
1119	of lower priority, but only once, using idle watchers to keep the event	1854	of lower priority, but only once, using idle watchers to keep the event
1120	loop from blocking if lower-priority coroutines are active, thus mapping	1855	loop from blocking if lower-priority coroutines are active, thus mapping
1121	low-priority coroutines to idle/background tasks).	1856	low-priority coroutines to idle/background tasks).
1122		1857
		1858	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)
		1859	priority, to ensure that they are being run before any other watchers
		1860	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,
		1861	too) should not activate ("feed") events into libev. While libev fully
		1862	supports this, they will be called before other C<ev_check> watchers
		1863	did their job. As C<ev_check> watchers are often used to embed other
		1864	(non-libev) event loops those other event loops might be in an unusable
		1865	state until their C<ev_check> watcher ran (always remind yourself to
		1866	coexist peacefully with others).
		1867
		1868	=head3 Watcher-Specific Functions and Data Members
		1869
1123	=over 4	1870	=over 4
1124		1871
1125	=item ev_prepare_init (ev_prepare *, callback)	1872	=item ev_prepare_init (ev_prepare *, callback)
1126		1873
1127	=item ev_check_init (ev_check *, callback)	1874	=item ev_check_init (ev_check *, callback)
…		…
1130	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>	1877	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>
1131	macros, but using them is utterly, utterly and completely pointless.	1878	macros, but using them is utterly, utterly and completely pointless.
1132		1879
1133	=back	1880	=back
1134		1881
1135	Example: *TODO*.	1882	=head3 Examples
1136		1883
		1884	There are a number of principal ways to embed other event loops or modules
		1885	into libev. Here are some ideas on how to include libadns into libev
		1886	(there is a Perl module named C<EV::ADNS> that does this, which you could
		1887	use for an actually working example. Another Perl module named C<EV::Glib>
		1888	embeds a Glib main context into libev, and finally, C<Glib::EV> embeds EV
		1889	into the Glib event loop).
1137		1890
		1891	Method 1: Add IO watchers and a timeout watcher in a prepare handler,
		1892	and in a check watcher, destroy them and call into libadns. What follows
		1893	is pseudo-code only of course. This requires you to either use a low
		1894	priority for the check watcher or use C<ev_clear_pending> explicitly, as
		1895	the callbacks for the IO/timeout watchers might not have been called yet.
		1896
		1897	static ev_io iow [nfd];
		1898	static ev_timer tw;
		1899
		1900	static void
		1901	io_cb (ev_loop *loop, ev_io *w, int revents)
		1902	{
		1903	}
		1904
		1905	// create io watchers for each fd and a timer before blocking
		1906	static void
		1907	adns_prepare_cb (ev_loop *loop, ev_prepare *w, int revents)
		1908	{
		1909	int timeout = 3600000;
		1910	struct pollfd fds [nfd];
		1911	// actual code will need to loop here and realloc etc.
		1912	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
		1913
		1914	/* the callback is illegal, but won't be called as we stop during check */
		1915	ev_timer_init (&tw, 0, timeout * 1e-3);
		1916	ev_timer_start (loop, &tw);
		1917
		1918	// create one ev_io per pollfd
		1919	for (int i = 0; i < nfd; ++i)
		1920	{
		1921	ev_io_init (iow + i, io_cb, fds [i].fd,
		1922	((fds [i].events & POLLIN ? EV_READ : 0)
		1923	| (fds [i].events & POLLOUT ? EV_WRITE : 0)));
		1924
		1925	fds [i].revents = 0;
		1926	ev_io_start (loop, iow + i);
		1927	}
		1928	}
		1929
		1930	// stop all watchers after blocking
		1931	static void
		1932	adns_check_cb (ev_loop *loop, ev_check *w, int revents)
		1933	{
		1934	ev_timer_stop (loop, &tw);
		1935
		1936	for (int i = 0; i < nfd; ++i)
		1937	{
		1938	// set the relevant poll flags
		1939	// could also call adns_processreadable etc. here
		1940	struct pollfd *fd = fds + i;
		1941	int revents = ev_clear_pending (iow + i);
		1942	if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;
		1943	if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;
		1944
		1945	// now stop the watcher
		1946	ev_io_stop (loop, iow + i);
		1947	}
		1948
		1949	adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));
		1950	}
		1951
		1952	Method 2: This would be just like method 1, but you run C<adns_afterpoll>
		1953	in the prepare watcher and would dispose of the check watcher.
		1954
		1955	Method 3: If the module to be embedded supports explicit event
		1956	notification (adns does), you can also make use of the actual watcher
		1957	callbacks, and only destroy/create the watchers in the prepare watcher.
		1958
		1959	static void
		1960	timer_cb (EV_P_ ev_timer *w, int revents)
		1961	{
		1962	adns_state ads = (adns_state)w->data;
		1963	update_now (EV_A);
		1964
		1965	adns_processtimeouts (ads, &tv_now);
		1966	}
		1967
		1968	static void
		1969	io_cb (EV_P_ ev_io *w, int revents)
		1970	{
		1971	adns_state ads = (adns_state)w->data;
		1972	update_now (EV_A);
		1973
		1974	if (revents & EV_READ ) adns_processreadable (ads, w->fd, &tv_now);
		1975	if (revents & EV_WRITE) adns_processwriteable (ads, w->fd, &tv_now);
		1976	}
		1977
		1978	// do not ever call adns_afterpoll
		1979
		1980	Method 4: Do not use a prepare or check watcher because the module you
		1981	want to embed is too inflexible to support it. Instead, youc na override
		1982	their poll function. The drawback with this solution is that the main
		1983	loop is now no longer controllable by EV. The C<Glib::EV> module does
		1984	this.
		1985
		1986	static gint
		1987	event_poll_func (GPollFD *fds, guint nfds, gint timeout)
		1988	{
		1989	int got_events = 0;
		1990
		1991	for (n = 0; n < nfds; ++n)
		1992	// create/start io watcher that sets the relevant bits in fds[n] and increment got_events
		1993
		1994	if (timeout >= 0)
		1995	// create/start timer
		1996
		1997	// poll
		1998	ev_loop (EV_A_ 0);
		1999
		2000	// stop timer again
		2001	if (timeout >= 0)
		2002	ev_timer_stop (EV_A_ &to);
		2003
		2004	// stop io watchers again - their callbacks should have set
		2005	for (n = 0; n < nfds; ++n)
		2006	ev_io_stop (EV_A_ iow [n]);
		2007
		2008	return got_events;
		2009	}
		2010
		2011
1138	=head2 C<ev_embed> - when one backend isn't enough	2012	=head2 C<ev_embed> - when one backend isn't enough...
1139		2013
1140	This is a rather advanced watcher type that lets you embed one event loop	2014	This is a rather advanced watcher type that lets you embed one event loop
1141	into another (currently only C<ev_io> events are supported in the embedded	2015	into another (currently only C<ev_io> events are supported in the embedded
1142	loop, other types of watchers might be handled in a delayed or incorrect	2016	loop, other types of watchers might be handled in a delayed or incorrect
1143	fashion and must not be used).	2017	fashion and must not be used).
…		…
1182	portable one.	2056	portable one.
1183		2057
1184	So when you want to use this feature you will always have to be prepared	2058	So when you want to use this feature you will always have to be prepared
1185	that you cannot get an embeddable loop. The recommended way to get around	2059	that you cannot get an embeddable loop. The recommended way to get around
1186	this is to have a separate variables for your embeddable loop, try to	2060	this is to have a separate variables for your embeddable loop, try to
1187	create it, and if that fails, use the normal loop for everything:	2061	create it, and if that fails, use the normal loop for everything.
		2062
		2063	=head3 Watcher-Specific Functions and Data Members
		2064
		2065	=over 4
		2066
		2067	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
		2068
		2069	=item ev_embed_set (ev_embed *, callback, struct ev_loop *embedded_loop)
		2070
		2071	Configures the watcher to embed the given loop, which must be
		2072	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
		2073	invoked automatically, otherwise it is the responsibility of the callback
		2074	to invoke it (it will continue to be called until the sweep has been done,
		2075	if you do not want thta, you need to temporarily stop the embed watcher).
		2076
		2077	=item ev_embed_sweep (loop, ev_embed *)
		2078
		2079	Make a single, non-blocking sweep over the embedded loop. This works
		2080	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
		2081	apropriate way for embedded loops.
		2082
		2083	=item struct ev_loop *other [read-only]
		2084
		2085	The embedded event loop.
		2086
		2087	=back
		2088
		2089	=head3 Examples
		2090
		2091	Example: Try to get an embeddable event loop and embed it into the default
		2092	event loop. If that is not possible, use the default loop. The default
		2093	loop is stored in C<loop_hi>, while the mebeddable loop is stored in
		2094	C<loop_lo> (which is C<loop_hi> in the acse no embeddable loop can be
		2095	used).
1188		2096
1189	struct ev_loop *loop_hi = ev_default_init (0);	2097	struct ev_loop *loop_hi = ev_default_init (0);
1190	struct ev_loop *loop_lo = 0;	2098	struct ev_loop *loop_lo = 0;
1191	struct ev_embed embed;	2099	struct ev_embed embed;
1192		2100
…		…
1203	ev_embed_start (loop_hi, &embed);	2111	ev_embed_start (loop_hi, &embed);
1204	}	2112	}
1205	else	2113	else
1206	loop_lo = loop_hi;	2114	loop_lo = loop_hi;
1207		2115
		2116	Example: Check if kqueue is available but not recommended and create
		2117	a kqueue backend for use with sockets (which usually work with any
		2118	kqueue implementation). Store the kqueue/socket-only event loop in
		2119	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
		2120
		2121	struct ev_loop *loop = ev_default_init (0);
		2122	struct ev_loop *loop_socket = 0;
		2123	struct ev_embed embed;
		2124
		2125	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
		2126	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
		2127	{
		2128	ev_embed_init (&embed, 0, loop_socket);
		2129	ev_embed_start (loop, &embed);
		2130	}
		2131
		2132	if (!loop_socket)
		2133	loop_socket = loop;
		2134
		2135	// now use loop_socket for all sockets, and loop for everything else
		2136
		2137
		2138	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
		2139
		2140	Fork watchers are called when a C<fork ()> was detected (usually because
		2141	whoever is a good citizen cared to tell libev about it by calling
		2142	C<ev_default_fork> or C<ev_loop_fork>). The invocation is done before the
		2143	event loop blocks next and before C<ev_check> watchers are being called,
		2144	and only in the child after the fork. If whoever good citizen calling
		2145	C<ev_default_fork> cheats and calls it in the wrong process, the fork
		2146	handlers will be invoked, too, of course.
		2147
		2148	=head3 Watcher-Specific Functions and Data Members
		2149
1208	=over 4	2150	=over 4
1209		2151
1210	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)	2152	=item ev_fork_init (ev_signal *, callback)
1211		2153
1212	=item ev_embed_set (ev_embed *, callback, struct ev_loop *embedded_loop)	2154	Initialises and configures the fork watcher - it has no parameters of any
		2155	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
		2156	believe me.
1213		2157
1214	Configures the watcher to embed the given loop, which must be	2158	=back
1215	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
1216	invoked automatically, otherwise it is the responsibility of the callback
1217	to invoke it (it will continue to be called until the sweep has been done,
1218	if you do not want thta, you need to temporarily stop the embed watcher).
1219		2159
1220	=item ev_embed_sweep (loop, ev_embed *)
1221		2160
1222	Make a single, non-blocking sweep over the embedded loop. This works	2161	=head2 C<ev_async> - how to wake up another event loop
1223	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	2162
1224	apropriate way for embedded loops.	2163	In general, you cannot use an C<ev_loop> from multiple threads or other
		2164	asynchronous sources such as signal handlers (as opposed to multiple event
		2165	loops - those are of course safe to use in different threads).
		2166
		2167	Sometimes, however, you need to wake up another event loop you do not
		2168	control, for example because it belongs to another thread. This is what
		2169	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you
		2170	can signal it by calling C<ev_async_send>, which is thread- and signal
		2171	safe.
		2172
		2173	This functionality is very similar to C<ev_signal> watchers, as signals,
		2174	too, are asynchronous in nature, and signals, too, will be compressed
		2175	(i.e. the number of callback invocations may be less than the number of
		2176	C<ev_async_sent> calls).
		2177
		2178	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not
		2179	just the default loop.
		2180
		2181	=head3 Queueing
		2182
		2183	C<ev_async> does not support queueing of data in any way. The reason
		2184	is that the author does not know of a simple (or any) algorithm for a
		2185	multiple-writer-single-reader queue that works in all cases and doesn't
		2186	need elaborate support such as pthreads.
		2187
		2188	That means that if you want to queue data, you have to provide your own
		2189	queue. But at least I can tell you would implement locking around your
		2190	queue:
		2191
		2192	=over 4
		2193
		2194	=item queueing from a signal handler context
		2195
		2196	To implement race-free queueing, you simply add to the queue in the signal
		2197	handler but you block the signal handler in the watcher callback. Here is an example that does that for
		2198	some fictitiuous SIGUSR1 handler:
		2199
		2200	static ev_async mysig;
		2201
		2202	static void
		2203	sigusr1_handler (void)
		2204	{
		2205	sometype data;
		2206
		2207	// no locking etc.
		2208	queue_put (data);
		2209	ev_async_send (EV_DEFAULT_ &mysig);
		2210	}
		2211
		2212	static void
		2213	mysig_cb (EV_P_ ev_async *w, int revents)
		2214	{
		2215	sometype data;
		2216	sigset_t block, prev;
		2217
		2218	sigemptyset (&block);
		2219	sigaddset (&block, SIGUSR1);
		2220	sigprocmask (SIG_BLOCK, &block, &prev);
		2221
		2222	while (queue_get (&data))
		2223	process (data);
		2224
		2225	if (sigismember (&prev, SIGUSR1)
		2226	sigprocmask (SIG_UNBLOCK, &block, 0);
		2227	}
		2228
		2229	(Note: pthreads in theory requires you to use C<pthread_setmask>
		2230	instead of C<sigprocmask> when you use threads, but libev doesn't do it
		2231	either...).
		2232
		2233	=item queueing from a thread context
		2234
		2235	The strategy for threads is different, as you cannot (easily) block
		2236	threads but you can easily preempt them, so to queue safely you need to
		2237	employ a traditional mutex lock, such as in this pthread example:
		2238
		2239	static ev_async mysig;
		2240	static pthread_mutex_t mymutex = PTHREAD_MUTEX_INITIALIZER;
		2241
		2242	static void
		2243	otherthread (void)
		2244	{
		2245	// only need to lock the actual queueing operation
		2246	pthread_mutex_lock (&mymutex);
		2247	queue_put (data);
		2248	pthread_mutex_unlock (&mymutex);
		2249
		2250	ev_async_send (EV_DEFAULT_ &mysig);
		2251	}
		2252
		2253	static void
		2254	mysig_cb (EV_P_ ev_async *w, int revents)
		2255	{
		2256	pthread_mutex_lock (&mymutex);
		2257
		2258	while (queue_get (&data))
		2259	process (data);
		2260
		2261	pthread_mutex_unlock (&mymutex);
		2262	}
		2263
		2264	=back
		2265
		2266
		2267	=head3 Watcher-Specific Functions and Data Members
		2268
		2269	=over 4
		2270
		2271	=item ev_async_init (ev_async *, callback)
		2272
		2273	Initialises and configures the async watcher - it has no parameters of any
		2274	kind. There is a C<ev_asynd_set> macro, but using it is utterly pointless,
		2275	believe me.
		2276
		2277	=item ev_async_send (loop, ev_async *)
		2278
		2279	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
		2280	an C<EV_ASYNC> event on the watcher into the event loop. Unlike
		2281	C<ev_feed_event>, this call is safe to do in other threads, signal or
		2282	similar contexts (see the dicusssion of C<EV_ATOMIC_T> in the embedding
		2283	section below on what exactly this means).
		2284
		2285	This call incurs the overhead of a syscall only once per loop iteration,
		2286	so while the overhead might be noticable, it doesn't apply to repeated
		2287	calls to C<ev_async_send>.
		2288
		2289	=item bool = ev_async_pending (ev_async *)
		2290
		2291	Returns a non-zero value when C<ev_async_send> has been called on the
		2292	watcher but the event has not yet been processed (or even noted) by the
		2293	event loop.
		2294
		2295	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When
		2296	the loop iterates next and checks for the watcher to have become active,
		2297	it will reset the flag again. C<ev_async_pending> can be used to very
		2298	quickly check wether invoking the loop might be a good idea.
		2299
		2300	Not that this does I<not> check wether the watcher itself is pending, only
		2301	wether it has been requested to make this watcher pending.
1225		2302
1226	=back	2303	=back
1227		2304
1228		2305
1229	=head1 OTHER FUNCTIONS	2306	=head1 OTHER FUNCTIONS
…		…
1301		2378
1302	=item * Priorities are not currently supported. Initialising priorities	2379	=item * Priorities are not currently supported. Initialising priorities
1303	will fail and all watchers will have the same priority, even though there	2380	will fail and all watchers will have the same priority, even though there
1304	is an ev_pri field.	2381	is an ev_pri field.
1305		2382
		2383	=item * In libevent, the last base created gets the signals, in libev, the
		2384	first base created (== the default loop) gets the signals.
		2385
1306	=item * Other members are not supported.	2386	=item * Other members are not supported.
1307		2387
1308	=item * The libev emulation is I<not> ABI compatible to libevent, you need	2388	=item * The libev emulation is I<not> ABI compatible to libevent, you need
1309	to use the libev header file and library.	2389	to use the libev header file and library.
1310		2390
…		…
1318		2398
1319	To use it,	2399	To use it,
1320		2400
1321	#include <ev++.h>	2401	#include <ev++.h>
1322		2402
1323	(it is not installed by default). This automatically includes F<ev.h>	2403	This automatically includes F<ev.h> and puts all of its definitions (many
1324	and puts all of its definitions (many of them macros) into the global	2404	of them macros) into the global namespace. All C++ specific things are
1325	namespace. All C++ specific things are put into the C<ev> namespace.	2405	put into the C<ev> namespace. It should support all the same embedding
		2406	options as F<ev.h>, most notably C<EV_MULTIPLICITY>.
1326		2407
1327	It should support all the same embedding options as F<ev.h>, most notably	2408	Care has been taken to keep the overhead low. The only data member the C++
1328	C<EV_MULTIPLICITY>.	2409	classes add (compared to plain C-style watchers) is the event loop pointer
		2410	that the watcher is associated with (or no additional members at all if
		2411	you disable C<EV_MULTIPLICITY> when embedding libev).
		2412
		2413	Currently, functions, and static and non-static member functions can be
		2414	used as callbacks. Other types should be easy to add as long as they only
		2415	need one additional pointer for context. If you need support for other
		2416	types of functors please contact the author (preferably after implementing
		2417	it).
1329		2418
1330	Here is a list of things available in the C<ev> namespace:	2419	Here is a list of things available in the C<ev> namespace:
1331		2420
1332	=over 4	2421	=over 4
1333		2422
…		…
1349		2438
1350	All of those classes have these methods:	2439	All of those classes have these methods:
1351		2440
1352	=over 4	2441	=over 4
1353		2442
1354	=item ev::TYPE::TYPE (object *, object::method *)	2443	=item ev::TYPE::TYPE ()
1355		2444
1356	=item ev::TYPE::TYPE (object *, object::method *, struct ev_loop *)	2445	=item ev::TYPE::TYPE (struct ev_loop *)
1357		2446
1358	=item ev::TYPE::~TYPE	2447	=item ev::TYPE::~TYPE
1359		2448
1360	The constructor takes a pointer to an object and a method pointer to	2449	The constructor (optionally) takes an event loop to associate the watcher
1361	the event handler callback to call in this class. The constructor calls	2450	with. If it is omitted, it will use C<EV_DEFAULT>.
1362	C<ev_init> for you, which means you have to call the C<set> method	2451
1363	before starting it. If you do not specify a loop then the constructor	2452	The constructor calls C<ev_init> for you, which means you have to call the
1364	automatically associates the default loop with this watcher.	2453	C<set> method before starting it.
		2454
		2455	It will not set a callback, however: You have to call the templated C<set>
		2456	method to set a callback before you can start the watcher.
		2457
		2458	(The reason why you have to use a method is a limitation in C++ which does
		2459	not allow explicit template arguments for constructors).
1365		2460
1366	The destructor automatically stops the watcher if it is active.	2461	The destructor automatically stops the watcher if it is active.
		2462
		2463	=item w->set<class, &class::method> (object *)
		2464
		2465	This method sets the callback method to call. The method has to have a
		2466	signature of C<void (*)(ev_TYPE &, int)>, it receives the watcher as
		2467	first argument and the C<revents> as second. The object must be given as
		2468	parameter and is stored in the C<data> member of the watcher.
		2469
		2470	This method synthesizes efficient thunking code to call your method from
		2471	the C callback that libev requires. If your compiler can inline your
		2472	callback (i.e. it is visible to it at the place of the C<set> call and
		2473	your compiler is good :), then the method will be fully inlined into the
		2474	thunking function, making it as fast as a direct C callback.
		2475
		2476	Example: simple class declaration and watcher initialisation
		2477
		2478	struct myclass
		2479	{
		2480	void io_cb (ev::io &w, int revents) { }
		2481	}
		2482
		2483	myclass obj;
		2484	ev::io iow;
		2485	iow.set <myclass, &myclass::io_cb> (&obj);
		2486
		2487	=item w->set<function> (void *data = 0)
		2488
		2489	Also sets a callback, but uses a static method or plain function as
		2490	callback. The optional C<data> argument will be stored in the watcher's
		2491	C<data> member and is free for you to use.
		2492
		2493	The prototype of the C<function> must be C<void (*)(ev::TYPE &w, int)>.
		2494
		2495	See the method-C<set> above for more details.
		2496
		2497	Example:
		2498
		2499	static void io_cb (ev::io &w, int revents) { }
		2500	iow.set <io_cb> ();
1367		2501
1368	=item w->set (struct ev_loop *)	2502	=item w->set (struct ev_loop *)
1369		2503
1370	Associates a different C<struct ev_loop> with this watcher. You can only	2504	Associates a different C<struct ev_loop> with this watcher. You can only
1371	do this when the watcher is inactive (and not pending either).	2505	do this when the watcher is inactive (and not pending either).
1372		2506
1373	=item w->set ([args])	2507	=item w->set ([args])
1374		2508
1375	Basically the same as C<ev_TYPE_set>, with the same args. Must be	2509	Basically the same as C<ev_TYPE_set>, with the same args. Must be
1376	called at least once. Unlike the C counterpart, an active watcher gets	2510	called at least once. Unlike the C counterpart, an active watcher gets
1377	automatically stopped and restarted.	2511	automatically stopped and restarted when reconfiguring it with this
		2512	method.
1378		2513
1379	=item w->start ()	2514	=item w->start ()
1380		2515
1381	Starts the watcher. Note that there is no C<loop> argument as the	2516	Starts the watcher. Note that there is no C<loop> argument, as the
1382	constructor already takes the loop.	2517	constructor already stores the event loop.
1383		2518
1384	=item w->stop ()	2519	=item w->stop ()
1385		2520
1386	Stops the watcher if it is active. Again, no C<loop> argument.	2521	Stops the watcher if it is active. Again, no C<loop> argument.
1387		2522
1388	=item w->again () C<ev::timer>, C<ev::periodic> only	2523	=item w->again () (C<ev::timer>, C<ev::periodic> only)
1389		2524
1390	For C<ev::timer> and C<ev::periodic>, this invokes the corresponding	2525	For C<ev::timer> and C<ev::periodic>, this invokes the corresponding
1391	C<ev_TYPE_again> function.	2526	C<ev_TYPE_again> function.
1392		2527
1393	=item w->sweep () C<ev::embed> only	2528	=item w->sweep () (C<ev::embed> only)
1394		2529
1395	Invokes C<ev_embed_sweep>.	2530	Invokes C<ev_embed_sweep>.
		2531
		2532	=item w->update () (C<ev::stat> only)
		2533
		2534	Invokes C<ev_stat_stat>.
1396		2535
1397	=back	2536	=back
1398		2537
1399	=back	2538	=back
1400		2539
1401	Example: Define a class with an IO and idle watcher, start one of them in	2540	Example: Define a class with an IO and idle watcher, start one of them in
1402	the constructor.	2541	the constructor.
1403		2542
1404	class myclass	2543	class myclass
1405	{	2544	{
1406	ev_io io; void io_cb (ev::io &w, int revents);	2545	ev::io io; void io_cb (ev::io &w, int revents);
1407	ev_idle idle void idle_cb (ev::idle &w, int revents);	2546	ev:idle idle void idle_cb (ev::idle &w, int revents);
1408		2547
1409	myclass ();	2548	myclass (int fd)
		2549	{
		2550	io .set <myclass, &myclass::io_cb > (this);
		2551	idle.set <myclass, &myclass::idle_cb> (this);
		2552
		2553	io.start (fd, ev::READ);
		2554	}
		2555	};
		2556
		2557
		2558	=head1 OTHER LANGUAGE BINDINGS
		2559
		2560	Libev does not offer other language bindings itself, but bindings for a
		2561	numbe rof languages exist in the form of third-party packages. If you know
		2562	any interesting language binding in addition to the ones listed here, drop
		2563	me a note.
		2564
		2565	=over 4
		2566
		2567	=item Perl
		2568
		2569	The EV module implements the full libev API and is actually used to test
		2570	libev. EV is developed together with libev. Apart from the EV core module,
		2571	there are additional modules that implement libev-compatible interfaces
		2572	to C<libadns> (C<EV::ADNS>), C<Net::SNMP> (C<Net::SNMP::EV>) and the
		2573	C<libglib> event core (C<Glib::EV> and C<EV::Glib>).
		2574
		2575	It can be found and installed via CPAN, its homepage is found at
		2576	L<http://software.schmorp.de/pkg/EV>.
		2577
		2578	=item Ruby
		2579
		2580	Tony Arcieri has written a ruby extension that offers access to a subset
		2581	of the libev API and adds filehandle abstractions, asynchronous DNS and
		2582	more on top of it. It can be found via gem servers. Its homepage is at
		2583	L<http://rev.rubyforge.org/>.
		2584
		2585	=item D
		2586
		2587	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
		2588	be found at L<http://git.llucax.com.ar/?p=software/ev.d.git;a=summary>.
		2589
		2590	=back
		2591
		2592
		2593	=head1 MACRO MAGIC
		2594
		2595	Libev can be compiled with a variety of options, the most fundamantal
		2596	of which is C<EV_MULTIPLICITY>. This option determines whether (most)
		2597	functions and callbacks have an initial C<struct ev_loop *> argument.
		2598
		2599	To make it easier to write programs that cope with either variant, the
		2600	following macros are defined:
		2601
		2602	=over 4
		2603
		2604	=item C<EV_A>, C<EV_A_>
		2605
		2606	This provides the loop I<argument> for functions, if one is required ("ev
		2607	loop argument"). The C<EV_A> form is used when this is the sole argument,
		2608	C<EV_A_> is used when other arguments are following. Example:
		2609
		2610	ev_unref (EV_A);
		2611	ev_timer_add (EV_A_ watcher);
		2612	ev_loop (EV_A_ 0);
		2613
		2614	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
		2615	which is often provided by the following macro.
		2616
		2617	=item C<EV_P>, C<EV_P_>
		2618
		2619	This provides the loop I<parameter> for functions, if one is required ("ev
		2620	loop parameter"). The C<EV_P> form is used when this is the sole parameter,
		2621	C<EV_P_> is used when other parameters are following. Example:
		2622
		2623	// this is how ev_unref is being declared
		2624	static void ev_unref (EV_P);
		2625
		2626	// this is how you can declare your typical callback
		2627	static void cb (EV_P_ ev_timer *w, int revents)
		2628
		2629	It declares a parameter C<loop> of type C<struct ev_loop *>, quite
		2630	suitable for use with C<EV_A>.
		2631
		2632	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
		2633
		2634	Similar to the other two macros, this gives you the value of the default
		2635	loop, if multiple loops are supported ("ev loop default").
		2636
		2637	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
		2638
		2639	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
		2640	default loop has been initialised (C<UC> == unchecked). Their behaviour
		2641	is undefined when the default loop has not been initialised by a previous
		2642	execution of C<EV_DEFAULT>, C<EV_DEFAULT_> or C<ev_default_init (...)>.
		2643
		2644	It is often prudent to use C<EV_DEFAULT> when initialising the first
		2645	watcher in a function but use C<EV_DEFAULT_UC> afterwards.
		2646
		2647	=back
		2648
		2649	Example: Declare and initialise a check watcher, utilising the above
		2650	macros so it will work regardless of whether multiple loops are supported
		2651	or not.
		2652
		2653	static void
		2654	check_cb (EV_P_ ev_timer *w, int revents)
		2655	{
		2656	ev_check_stop (EV_A_ w);
1410	}	2657	}
1411		2658
1412	myclass::myclass (int fd)	2659	ev_check check;
1413	: io (this, &myclass::io_cb),	2660	ev_check_init (&check, check_cb);
1414	idle (this, &myclass::idle_cb)	2661	ev_check_start (EV_DEFAULT_ &check);
1415	{	2662	ev_loop (EV_DEFAULT_ 0);
1416	io.start (fd, ev::READ);
1417	}
1418		2663
1419	=head1 EMBEDDING	2664	=head1 EMBEDDING
1420		2665
1421	Libev can (and often is) directly embedded into host	2666	Libev can (and often is) directly embedded into host
1422	applications. Examples of applications that embed it include the Deliantra	2667	applications. Examples of applications that embed it include the Deliantra
1423	Game Server, the EV perl module, the GNU Virtual Private Ethernet (gvpe)	2668	Game Server, the EV perl module, the GNU Virtual Private Ethernet (gvpe)
1424	and rxvt-unicode.	2669	and rxvt-unicode.
1425		2670
1426	The goal is to enable you to just copy the neecssary files into your	2671	The goal is to enable you to just copy the necessary files into your
1427	source directory without having to change even a single line in them, so	2672	source directory without having to change even a single line in them, so
1428	you can easily upgrade by simply copying (or having a checked-out copy of	2673	you can easily upgrade by simply copying (or having a checked-out copy of
1429	libev somewhere in your source tree).	2674	libev somewhere in your source tree).
1430		2675
1431	=head2 FILESETS	2676	=head2 FILESETS
…		…
1462	ev_vars.h	2707	ev_vars.h
1463	ev_wrap.h	2708	ev_wrap.h
1464		2709
1465	ev_win32.c required on win32 platforms only	2710	ev_win32.c required on win32 platforms only
1466		2711
1467	ev_select.c only when select backend is enabled (which is is by default)	2712	ev_select.c only when select backend is enabled (which is enabled by default)
1468	ev_poll.c only when poll backend is enabled (disabled by default)	2713	ev_poll.c only when poll backend is enabled (disabled by default)
1469	ev_epoll.c only when the epoll backend is enabled (disabled by default)	2714	ev_epoll.c only when the epoll backend is enabled (disabled by default)
1470	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)	2715	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)
1471	ev_port.c only when the solaris port backend is enabled (disabled by default)	2716	ev_port.c only when the solaris port backend is enabled (disabled by default)
1472		2717
1473	F<ev.c> includes the backend files directly when enabled, so you only need	2718	F<ev.c> includes the backend files directly when enabled, so you only need
1474	to compile a single file.	2719	to compile this single file.
1475		2720
1476	=head3 LIBEVENT COMPATIBILITY API	2721	=head3 LIBEVENT COMPATIBILITY API
1477		2722
1478	To include the libevent compatibility API, also include:	2723	To include the libevent compatibility API, also include:
1479		2724
…		…
1492		2737
1493	=head3 AUTOCONF SUPPORT	2738	=head3 AUTOCONF SUPPORT
1494		2739
1495	Instead of using C<EV_STANDALONE=1> and providing your config in	2740	Instead of using C<EV_STANDALONE=1> and providing your config in
1496	whatever way you want, you can also C<m4_include([libev.m4])> in your	2741	whatever way you want, you can also C<m4_include([libev.m4])> in your
1497	F<configure.ac> and leave C<EV_STANDALONE> off. F<ev.c> will then include	2742	F<configure.ac> and leave C<EV_STANDALONE> undefined. F<ev.c> will then
1498	F<config.h> and configure itself accordingly.	2743	include F<config.h> and configure itself accordingly.
1499		2744
1500	For this of course you need the m4 file:	2745	For this of course you need the m4 file:
1501		2746
1502	libev.m4	2747	libev.m4
1503		2748
1504	=head2 PREPROCESSOR SYMBOLS/MACROS	2749	=head2 PREPROCESSOR SYMBOLS/MACROS
1505		2750
1506	Libev can be configured via a variety of preprocessor symbols you have to define	2751	Libev can be configured via a variety of preprocessor symbols you have to
1507	before including any of its files. The default is not to build for multiplicity	2752	define before including any of its files. The default in the absense of
1508	and only include the select backend.	2753	autoconf is noted for every option.
1509		2754
1510	=over 4	2755	=over 4
1511		2756
1512	=item EV_STANDALONE	2757	=item EV_STANDALONE
1513		2758
…		…
1521		2766
1522	If defined to be C<1>, libev will try to detect the availability of the	2767	If defined to be C<1>, libev will try to detect the availability of the
1523	monotonic clock option at both compiletime and runtime. Otherwise no use	2768	monotonic clock option at both compiletime and runtime. Otherwise no use
1524	of the monotonic clock option will be attempted. If you enable this, you	2769	of the monotonic clock option will be attempted. If you enable this, you
1525	usually have to link against librt or something similar. Enabling it when	2770	usually have to link against librt or something similar. Enabling it when
1526	the functionality isn't available is safe, though, althoguh you have	2771	the functionality isn't available is safe, though, although you have
1527	to make sure you link against any libraries where the C<clock_gettime>	2772	to make sure you link against any libraries where the C<clock_gettime>
1528	function is hiding in (often F<-lrt>).	2773	function is hiding in (often F<-lrt>).
1529		2774
1530	=item EV_USE_REALTIME	2775	=item EV_USE_REALTIME
1531		2776
1532	If defined to be C<1>, libev will try to detect the availability of the	2777	If defined to be C<1>, libev will try to detect the availability of the
1533	realtime clock option at compiletime (and assume its availability at	2778	realtime clock option at compiletime (and assume its availability at
1534	runtime if successful). Otherwise no use of the realtime clock option will	2779	runtime if successful). Otherwise no use of the realtime clock option will
1535	be attempted. This effectively replaces C<gettimeofday> by C<clock_get	2780	be attempted. This effectively replaces C<gettimeofday> by C<clock_get
1536	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See tzhe note about libraries	2781	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See the
1537	in the description of C<EV_USE_MONOTONIC>, though.	2782	note about libraries in the description of C<EV_USE_MONOTONIC>, though.
		2783
		2784	=item EV_USE_NANOSLEEP
		2785
		2786	If defined to be C<1>, libev will assume that C<nanosleep ()> is available
		2787	and will use it for delays. Otherwise it will use C<select ()>.
		2788
		2789	=item EV_USE_EVENTFD
		2790
		2791	If defined to be C<1>, then libev will assume that C<eventfd ()> is
		2792	available and will probe for kernel support at runtime. This will improve
		2793	C<ev_signal> and C<ev_async> performance and reduce resource consumption.
		2794	If undefined, it will be enabled if the headers indicate GNU/Linux + Glibc
		2795	2.7 or newer, otherwise disabled.
1538		2796
1539	=item EV_USE_SELECT	2797	=item EV_USE_SELECT
1540		2798
1541	If undefined or defined to be C<1>, libev will compile in support for the	2799	If undefined or defined to be C<1>, libev will compile in support for the
1542	C<select>(2) backend. No attempt at autodetection will be done: if no	2800	C<select>(2) backend. No attempt at autodetection will be done: if no
…		…
1561	be used is the winsock select). This means that it will call	2819	be used is the winsock select). This means that it will call
1562	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	2820	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
1563	it is assumed that all these functions actually work on fds, even	2821	it is assumed that all these functions actually work on fds, even
1564	on win32. Should not be defined on non-win32 platforms.	2822	on win32. Should not be defined on non-win32 platforms.
1565		2823
		2824	=item EV_FD_TO_WIN32_HANDLE
		2825
		2826	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
		2827	file descriptors to socket handles. When not defining this symbol (the
		2828	default), then libev will call C<_get_osfhandle>, which is usually
		2829	correct. In some cases, programs use their own file descriptor management,
		2830	in which case they can provide this function to map fds to socket handles.
		2831
1566	=item EV_USE_POLL	2832	=item EV_USE_POLL
1567		2833
1568	If defined to be C<1>, libev will compile in support for the C<poll>(2)	2834	If defined to be C<1>, libev will compile in support for the C<poll>(2)
1569	backend. Otherwise it will be enabled on non-win32 platforms. It	2835	backend. Otherwise it will be enabled on non-win32 platforms. It
1570	takes precedence over select.	2836	takes precedence over select.
1571		2837
1572	=item EV_USE_EPOLL	2838	=item EV_USE_EPOLL
1573		2839
1574	If defined to be C<1>, libev will compile in support for the Linux	2840	If defined to be C<1>, libev will compile in support for the Linux
1575	C<epoll>(7) backend. Its availability will be detected at runtime,	2841	C<epoll>(7) backend. Its availability will be detected at runtime,
1576	otherwise another method will be used as fallback. This is the	2842	otherwise another method will be used as fallback. This is the preferred
1577	preferred backend for GNU/Linux systems.	2843	backend for GNU/Linux systems. If undefined, it will be enabled if the
		2844	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
1578		2845
1579	=item EV_USE_KQUEUE	2846	=item EV_USE_KQUEUE
1580		2847
1581	If defined to be C<1>, libev will compile in support for the BSD style	2848	If defined to be C<1>, libev will compile in support for the BSD style
1582	C<kqueue>(2) backend. Its actual availability will be detected at runtime,	2849	C<kqueue>(2) backend. Its actual availability will be detected at runtime,
…		…
1597		2864
1598	=item EV_USE_DEVPOLL	2865	=item EV_USE_DEVPOLL
1599		2866
1600	reserved for future expansion, works like the USE symbols above.	2867	reserved for future expansion, works like the USE symbols above.
1601		2868
		2869	=item EV_USE_INOTIFY
		2870
		2871	If defined to be C<1>, libev will compile in support for the Linux inotify
		2872	interface to speed up C<ev_stat> watchers. Its actual availability will
		2873	be detected at runtime. If undefined, it will be enabled if the headers
		2874	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
		2875
		2876	=item EV_ATOMIC_T
		2877
		2878	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
		2879	access is atomic with respect to other threads or signal contexts. No such
		2880	type is easily found in the C language, so you can provide your own type
		2881	that you know is safe for your purposes. It is used both for signal handler "locking"
		2882	as well as for signal and thread safety in C<ev_async> watchers.
		2883
		2884	In the absense of this define, libev will use C<sig_atomic_t volatile>
		2885	(from F<signal.h>), which is usually good enough on most platforms.
		2886
1602	=item EV_H	2887	=item EV_H
1603		2888
1604	The name of the F<ev.h> header file used to include it. The default if	2889	The name of the F<ev.h> header file used to include it. The default if
1605	undefined is C<< <ev.h> >> in F<event.h> and C<"ev.h"> in F<ev.c>. This	2890	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
1606	can be used to virtually rename the F<ev.h> header file in case of conflicts.	2891	used to virtually rename the F<ev.h> header file in case of conflicts.
1607		2892
1608	=item EV_CONFIG_H	2893	=item EV_CONFIG_H
1609		2894
1610	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	2895	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
1611	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	2896	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
1612	C<EV_H>, above.	2897	C<EV_H>, above.
1613		2898
1614	=item EV_EVENT_H	2899	=item EV_EVENT_H
1615		2900
1616	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	2901	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
1617	of how the F<event.h> header can be found.	2902	of how the F<event.h> header can be found, the default is C<"event.h">.
1618		2903
1619	=item EV_PROTOTYPES	2904	=item EV_PROTOTYPES
1620		2905
1621	If defined to be C<0>, then F<ev.h> will not define any function	2906	If defined to be C<0>, then F<ev.h> will not define any function
1622	prototypes, but still define all the structs and other symbols. This is	2907	prototypes, but still define all the structs and other symbols. This is
…		…
1629	will have the C<struct ev_loop *> as first argument, and you can create	2914	will have the C<struct ev_loop *> as first argument, and you can create
1630	additional independent event loops. Otherwise there will be no support	2915	additional independent event loops. Otherwise there will be no support
1631	for multiple event loops and there is no first event loop pointer	2916	for multiple event loops and there is no first event loop pointer
1632	argument. Instead, all functions act on the single default loop.	2917	argument. Instead, all functions act on the single default loop.
1633		2918
		2919	=item EV_MINPRI
		2920
		2921	=item EV_MAXPRI
		2922
		2923	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to
		2924	C<EV_MAXPRI>, but otherwise there are no non-obvious limitations. You can
		2925	provide for more priorities by overriding those symbols (usually defined
		2926	to be C<-2> and C<2>, respectively).
		2927
		2928	When doing priority-based operations, libev usually has to linearly search
		2929	all the priorities, so having many of them (hundreds) uses a lot of space
		2930	and time, so using the defaults of five priorities (-2 .. +2) is usually
		2931	fine.
		2932
		2933	If your embedding app does not need any priorities, defining these both to
		2934	C<0> will save some memory and cpu.
		2935
1634	=item EV_PERIODICS	2936	=item EV_PERIODIC_ENABLE
1635		2937
1636	If undefined or defined to be C<1>, then periodic timers are supported,	2938	If undefined or defined to be C<1>, then periodic timers are supported. If
1637	otherwise not. This saves a few kb of code.	2939	defined to be C<0>, then they are not. Disabling them saves a few kB of
		2940	code.
		2941
		2942	=item EV_IDLE_ENABLE
		2943
		2944	If undefined or defined to be C<1>, then idle watchers are supported. If
		2945	defined to be C<0>, then they are not. Disabling them saves a few kB of
		2946	code.
		2947
		2948	=item EV_EMBED_ENABLE
		2949
		2950	If undefined or defined to be C<1>, then embed watchers are supported. If
		2951	defined to be C<0>, then they are not.
		2952
		2953	=item EV_STAT_ENABLE
		2954
		2955	If undefined or defined to be C<1>, then stat watchers are supported. If
		2956	defined to be C<0>, then they are not.
		2957
		2958	=item EV_FORK_ENABLE
		2959
		2960	If undefined or defined to be C<1>, then fork watchers are supported. If
		2961	defined to be C<0>, then they are not.
		2962
		2963	=item EV_ASYNC_ENABLE
		2964
		2965	If undefined or defined to be C<1>, then async watchers are supported. If
		2966	defined to be C<0>, then they are not.
		2967
		2968	=item EV_MINIMAL
		2969
		2970	If you need to shave off some kilobytes of code at the expense of some
		2971	speed, define this symbol to C<1>. Currently only used for gcc to override
		2972	some inlining decisions, saves roughly 30% codesize of amd64.
		2973
		2974	=item EV_PID_HASHSIZE
		2975
		2976	C<ev_child> watchers use a small hash table to distribute workload by
		2977	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more
		2978	than enough. If you need to manage thousands of children you might want to
		2979	increase this value (I<must> be a power of two).
		2980
		2981	=item EV_INOTIFY_HASHSIZE
		2982
		2983	C<ev_stat> watchers use a small hash table to distribute workload by
		2984	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),
		2985	usually more than enough. If you need to manage thousands of C<ev_stat>
		2986	watchers you might want to increase this value (I<must> be a power of
		2987	two).
1638		2988
1639	=item EV_COMMON	2989	=item EV_COMMON
1640		2990
1641	By default, all watchers have a C<void *data> member. By redefining	2991	By default, all watchers have a C<void *data> member. By redefining
1642	this macro to a something else you can include more and other types of	2992	this macro to a something else you can include more and other types of
…		…
1647		2997
1648	#define EV_COMMON \	2998	#define EV_COMMON \
1649	SV *self; /* contains this struct */ \	2999	SV *self; /* contains this struct */ \
1650	SV *cb_sv, *fh /* note no trailing ";" */	3000	SV *cb_sv, *fh /* note no trailing ";" */
1651		3001
1652	=item EV_CB_DECLARE(type)	3002	=item EV_CB_DECLARE (type)
1653		3003
1654	=item EV_CB_INVOKE(watcher,revents)	3004	=item EV_CB_INVOKE (watcher, revents)
1655		3005
1656	=item ev_set_cb(ev,cb)	3006	=item ev_set_cb (ev, cb)
1657		3007
1658	Can be used to change the callback member declaration in each watcher,	3008	Can be used to change the callback member declaration in each watcher,
1659	and the way callbacks are invoked and set. Must expand to a struct member	3009	and the way callbacks are invoked and set. Must expand to a struct member
1660	definition and a statement, respectively. See the F<ev.v> header file for	3010	definition and a statement, respectively. See the F<ev.h> header file for
1661	their default definitions. One possible use for overriding these is to	3011	their default definitions. One possible use for overriding these is to
1662	avoid the ev_loop pointer as first argument in all cases, or to use method	3012	avoid the C<struct ev_loop *> as first argument in all cases, or to use
1663	calls instead of plain function calls in C++.	3013	method calls instead of plain function calls in C++.
		3014
		3015	=head2 EXPORTED API SYMBOLS
		3016
		3017	If you need to re-export the API (e.g. via a dll) and you need a list of
		3018	exported symbols, you can use the provided F<Symbol.*> files which list
		3019	all public symbols, one per line:
		3020
		3021	Symbols.ev for libev proper
		3022	Symbols.event for the libevent emulation
		3023
		3024	This can also be used to rename all public symbols to avoid clashes with
		3025	multiple versions of libev linked together (which is obviously bad in
		3026	itself, but sometimes it is inconvinient to avoid this).
		3027
		3028	A sed command like this will create wrapper C<#define>'s that you need to
		3029	include before including F<ev.h>:
		3030
		3031	<Symbols.ev sed -e "s/.*/#define & myprefix_&/" >wrap.h
		3032
		3033	This would create a file F<wrap.h> which essentially looks like this:
		3034
		3035	#define ev_backend myprefix_ev_backend
		3036	#define ev_check_start myprefix_ev_check_start
		3037	#define ev_check_stop myprefix_ev_check_stop
		3038	...
1664		3039
1665	=head2 EXAMPLES	3040	=head2 EXAMPLES
1666		3041
1667	For a real-world example of a program the includes libev	3042	For a real-world example of a program the includes libev
1668	verbatim, you can have a look at the EV perl module	3043	verbatim, you can have a look at the EV perl module
…		…
1671	interface) and F<EV.xs> (implementation) files. Only the F<EV.xs> file	3046	interface) and F<EV.xs> (implementation) files. Only the F<EV.xs> file
1672	will be compiled. It is pretty complex because it provides its own header	3047	will be compiled. It is pretty complex because it provides its own header
1673	file.	3048	file.
1674		3049
1675	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	3050	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
1676	that everybody includes and which overrides some autoconf choices:	3051	that everybody includes and which overrides some configure choices:
1677		3052
		3053	#define EV_MINIMAL 1
1678	#define EV_USE_POLL 0	3054	#define EV_USE_POLL 0
1679	#define EV_MULTIPLICITY 0	3055	#define EV_MULTIPLICITY 0
1680	#define EV_PERIODICS 0	3056	#define EV_PERIODIC_ENABLE 0
		3057	#define EV_STAT_ENABLE 0
		3058	#define EV_FORK_ENABLE 0
1681	#define EV_CONFIG_H <config.h>	3059	#define EV_CONFIG_H <config.h>
		3060	#define EV_MINPRI 0
		3061	#define EV_MAXPRI 0
1682		3062
1683	#include "ev++.h"	3063	#include "ev++.h"
1684		3064
1685	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	3065	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
1686		3066
1687	#include "ev_cpp.h"	3067	#include "ev_cpp.h"
1688	#include "ev.c"	3068	#include "ev.c"
1689		3069
		3070
		3071	=head1 THREADS AND COROUTINES
		3072
		3073	=head2 THREADS
		3074
		3075	Libev itself is completely threadsafe, but it uses no locking. This
		3076	means that you can use as many loops as you want in parallel, as long as
		3077	only one thread ever calls into one libev function with the same loop
		3078	parameter.
		3079
		3080	Or put differently: calls with different loop parameters can be done in
		3081	parallel from multiple threads, calls with the same loop parameter must be
		3082	done serially (but can be done from different threads, as long as only one
		3083	thread ever is inside a call at any point in time, e.g. by using a mutex
		3084	per loop).
		3085
		3086	If you want to know which design is best for your problem, then I cannot
		3087	help you but by giving some generic advice:
		3088
		3089	=over 4
		3090
		3091	=item * most applications have a main thread: use the default libev loop
		3092	in that thread, or create a seperate thread running only the default loop.
		3093
		3094	This helps integrating other libraries or software modules that use libev
		3095	themselves and don't care/know about threading.
		3096
		3097	=item * one loop per thread is usually a good model.
		3098
		3099	Doing this is almost never wrong, sometimes a better-performance model
		3100	exists, but it is always a good start.
		3101
		3102	=item * other models exist, such as the leader/follower pattern, where one
		3103	loop is handed through multiple threads in a kind of round-robbin fashion.
		3104
		3105	Chosing a model is hard - look around, learn, know that usually you cna do
		3106	better than you currently do :-)
		3107
		3108	=item * often you need to talk to some other thread which blocks in the
		3109	event loop - C<ev_async> watchers can be used to wake them up from other
		3110	threads safely (or from signal contexts...).
		3111
		3112	=back
		3113
		3114	=head2 COROUTINES
		3115
		3116	Libev is much more accomodating to coroutines ("cooperative threads"):
		3117	libev fully supports nesting calls to it's functions from different
		3118	coroutines (e.g. you can call C<ev_loop> on the same loop from two
		3119	different coroutines and switch freely between both coroutines running the
		3120	loop, as long as you don't confuse yourself). The only exception is that
		3121	you must not do this from C<ev_periodic> reschedule callbacks.
		3122
		3123	Care has been invested into making sure that libev does not keep local
		3124	state inside C<ev_loop>, and other calls do not usually allow coroutine
		3125	switches.
		3126
		3127
		3128	=head1 COMPLEXITIES
		3129
		3130	In this section the complexities of (many of) the algorithms used inside
		3131	libev will be explained. For complexity discussions about backends see the
		3132	documentation for C<ev_default_init>.
		3133
		3134	All of the following are about amortised time: If an array needs to be
		3135	extended, libev needs to realloc and move the whole array, but this
		3136	happens asymptotically never with higher number of elements, so O(1) might
		3137	mean it might do a lengthy realloc operation in rare cases, but on average
		3138	it is much faster and asymptotically approaches constant time.
		3139
		3140	=over 4
		3141
		3142	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)
		3143
		3144	This means that, when you have a watcher that triggers in one hour and
		3145	there are 100 watchers that would trigger before that then inserting will
		3146	have to skip roughly seven (C<ld 100>) of these watchers.
		3147
		3148	=item Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)
		3149
		3150	That means that changing a timer costs less than removing/adding them
		3151	as only the relative motion in the event queue has to be paid for.
		3152
		3153	=item Starting io/check/prepare/idle/signal/child/fork/async watchers: O(1)
		3154
		3155	These just add the watcher into an array or at the head of a list.
		3156
		3157	=item Stopping check/prepare/idle/fork/async watchers: O(1)
		3158
		3159	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
		3160
		3161	These watchers are stored in lists then need to be walked to find the
		3162	correct watcher to remove. The lists are usually short (you don't usually
		3163	have many watchers waiting for the same fd or signal).
		3164
		3165	=item Finding the next timer in each loop iteration: O(1)
		3166
		3167	By virtue of using a binary heap, the next timer is always found at the
		3168	beginning of the storage array.
		3169
		3170	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
		3171
		3172	A change means an I/O watcher gets started or stopped, which requires
		3173	libev to recalculate its status (and possibly tell the kernel, depending
		3174	on backend and wether C<ev_io_set> was used).
		3175
		3176	=item Activating one watcher (putting it into the pending state): O(1)
		3177
		3178	=item Priority handling: O(number_of_priorities)
		3179
		3180	Priorities are implemented by allocating some space for each
		3181	priority. When doing priority-based operations, libev usually has to
		3182	linearly search all the priorities, but starting/stopping and activating
		3183	watchers becomes O(1) w.r.t. priority handling.
		3184
		3185	=item Sending an ev_async: O(1)
		3186
		3187	=item Processing ev_async_send: O(number_of_async_watchers)
		3188
		3189	=item Processing signals: O(max_signal_number)
		3190
		3191	Sending involves a syscall I<iff> there were no other C<ev_async_send>
		3192	calls in the current loop iteration. Checking for async and signal events
		3193	involves iterating over all running async watchers or all signal numbers.
		3194
		3195	=back
		3196
		3197
		3198	=head1 Win32 platform limitations and workarounds
		3199
		3200	Win32 doesn't support any of the standards (e.g. POSIX) that libev
		3201	requires, and its I/O model is fundamentally incompatible with the POSIX
		3202	model. Libev still offers limited functionality on this platform in
		3203	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
		3204	descriptors. This only applies when using Win32 natively, not when using
		3205	e.g. cygwin.
		3206
		3207	There is no supported compilation method available on windows except
		3208	embedding it into other applications.
		3209
		3210	Due to the many, low, and arbitrary limits on the win32 platform and the
		3211	abysmal performance of winsockets, using a large number of sockets is not
		3212	recommended (and not reasonable). If your program needs to use more than
		3213	a hundred or so sockets, then likely it needs to use a totally different
		3214	implementation for windows, as libev offers the POSIX model, which cannot
		3215	be implemented efficiently on windows (microsoft monopoly games).
		3216
		3217	=over 4
		3218
		3219	=item The winsocket select function
		3220
		3221	The winsocket C<select> function doesn't follow POSIX in that it requires
		3222	socket I<handles> and not socket I<file descriptors>. This makes select
		3223	very inefficient, and also requires a mapping from file descriptors
		3224	to socket handles. See the discussion of the C<EV_SELECT_USE_FD_SET>,
		3225	C<EV_SELECT_IS_WINSOCKET> and C<EV_FD_TO_WIN32_HANDLE> preprocessor
		3226	symbols for more info.
		3227
		3228	The configuration for a "naked" win32 using the microsoft runtime
		3229	libraries and raw winsocket select is:
		3230
		3231	#define EV_USE_SELECT 1
		3232	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
		3233
		3234	Note that winsockets handling of fd sets is O(n), so you can easily get a
		3235	complexity in the O(n²) range when using win32.
		3236
		3237	=item Limited number of file descriptors
		3238
		3239	Windows has numerous arbitrary (and low) limits on things. Early versions
		3240	of winsocket's select only supported waiting for a max. of C<64> handles
		3241	(probably owning to the fact that all windows kernels can only wait for
		3242	C<64> things at the same time internally; microsoft recommends spawning a
		3243	chain of threads and wait for 63 handles and the previous thread in each).
		3244
		3245	Newer versions support more handles, but you need to define C<FD_SETSIZE>
		3246	to some high number (e.g. C<2048>) before compiling the winsocket select
		3247	call (which might be in libev or elsewhere, for example, perl does its own
		3248	select emulation on windows).
		3249
		3250	Another limit is the number of file descriptors in the microsoft runtime
		3251	libraries, which by default is C<64> (there must be a hidden I<64> fetish
		3252	or something like this inside microsoft). You can increase this by calling
		3253	C<_setmaxstdio>, which can increase this limit to C<2048> (another
		3254	arbitrary limit), but is broken in many versions of the microsoft runtime
		3255	libraries.
		3256
		3257	This might get you to about C<512> or C<2048> sockets (depending on
		3258	windows version and/or the phase of the moon). To get more, you need to
		3259	wrap all I/O functions and provide your own fd management, but the cost of
		3260	calling select (O(n²)) will likely make this unworkable.
		3261
		3262	=back
		3263
		3264
		3265	=head1 PORTABILITY REQUIREMENTS
		3266
		3267	In addition to a working ISO-C implementation, libev relies on a few
		3268	additional extensions:
		3269
		3270	=over 4
		3271
		3272	=item C<sig_atomic_t volatile> must be thread-atomic as well
		3273
		3274	The type C<sig_atomic_t volatile> (or whatever is defined as
		3275	C<EV_ATOMIC_T>) must be atomic w.r.t. accesses from different
		3276	threads. This is not part of the specification for C<sig_atomic_t>, but is
		3277	believed to be sufficiently portable.
		3278
		3279	=item C<sigprocmask> must work in a threaded environment
		3280
		3281	Libev uses C<sigprocmask> to temporarily block signals. This is not
		3282	allowed in a threaded program (C<pthread_sigmask> has to be used). Typical
		3283	pthread implementations will either allow C<sigprocmask> in the "main
		3284	thread" or will block signals process-wide, both behaviours would
		3285	be compatible with libev. Interaction between C<sigprocmask> and
		3286	C<pthread_sigmask> could complicate things, however.
		3287
		3288	The most portable way to handle signals is to block signals in all threads
		3289	except the initial one, and run the default loop in the initial thread as
		3290	well.
		3291
		3292	=back
		3293
		3294	If you know of other additional requirements drop me a note.
		3295
		3296
1690	=head1 AUTHOR	3297	=head1 AUTHOR
1691		3298
1692	Marc Lehmann <libev@schmorp.de>.	3299	Marc Lehmann <libev@schmorp.de>.
1693		3300

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines