ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.148 by root, Thu Apr 24 01:42:11 2008 UTC vs.
Revision 1.429 by root, Fri Oct 11 07:50:43 2013 UTC

…		…
2		2
3	libev - a high performance full-featured event loop written in C	3	libev - a high performance full-featured event loop written in C
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	#include <ev.h>	7	#include <ev.h>
8		8
9	=head2 EXAMPLE PROGRAM	9	=head2 EXAMPLE PROGRAM
10		10
11	// a single header file is required	11	// a single header file is required
12	#include <ev.h>	12	#include <ev.h>
13		13
		14	#include <stdio.h> // for puts
		15
14	// every watcher type has its own typedef'd struct	16	// every watcher type has its own typedef'd struct
15	// with the name ev_<type>	17	// with the name ev_TYPE
16	ev_io stdin_watcher;	18	ev_io stdin_watcher;
17	ev_timer timeout_watcher;	19	ev_timer timeout_watcher;
18		20
19	// all watcher callbacks have a similar signature	21	// all watcher callbacks have a similar signature
20	// this callback is called when data is readable on stdin	22	// this callback is called when data is readable on stdin
21	static void	23	static void
22	stdin_cb (EV_P_ struct ev_io *w, int revents)	24	stdin_cb (EV_P_ ev_io *w, int revents)
23	{	25	{
24	puts ("stdin ready");	26	puts ("stdin ready");
25	// for one-shot events, one must manually stop the watcher	27	// for one-shot events, one must manually stop the watcher
26	// with its corresponding stop function.	28	// with its corresponding stop function.
27	ev_io_stop (EV_A_ w);	29	ev_io_stop (EV_A_ w);
28		30
29	// this causes all nested ev_loop's to stop iterating	31	// this causes all nested ev_run's to stop iterating
30	ev_unloop (EV_A_ EVUNLOOP_ALL);	32	ev_break (EV_A_ EVBREAK_ALL);
31	}	33	}
32		34
33	// another callback, this time for a time-out	35	// another callback, this time for a time-out
34	static void	36	static void
35	timeout_cb (EV_P_ struct ev_timer *w, int revents)	37	timeout_cb (EV_P_ ev_timer *w, int revents)
36	{	38	{
37	puts ("timeout");	39	puts ("timeout");
38	// this causes the innermost ev_loop to stop iterating	40	// this causes the innermost ev_run to stop iterating
39	ev_unloop (EV_A_ EVUNLOOP_ONE);	41	ev_break (EV_A_ EVBREAK_ONE);
40	}	42	}
41		43
42	int	44	int
43	main (void)	45	main (void)
44	{	46	{
45	// use the default event loop unless you have special needs	47	// use the default event loop unless you have special needs
46	struct ev_loop *loop = ev_default_loop (0);	48	struct ev_loop *loop = EV_DEFAULT;
47		49
48	// initialise an io watcher, then start it	50	// initialise an io watcher, then start it
49	// this one will watch for stdin to become readable	51	// this one will watch for stdin to become readable
50	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
51	ev_io_start (loop, &stdin_watcher);	53	ev_io_start (loop, &stdin_watcher);
52		54
53	// initialise a timer watcher, then start it	55	// initialise a timer watcher, then start it
54	// simple non-repeating 5.5 second timeout	56	// simple non-repeating 5.5 second timeout
55	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	57	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
56	ev_timer_start (loop, &timeout_watcher);	58	ev_timer_start (loop, &timeout_watcher);
57		59
58	// now wait for events to arrive	60	// now wait for events to arrive
59	ev_loop (loop, 0);	61	ev_run (loop, 0);
60		62
61	// unloop was called, so exit	63	// break was called, so exit
62	return 0;	64	return 0;
63	}	65	}
64		66
65	=head1 DESCRIPTION	67	=head1 ABOUT THIS DOCUMENT
		68
		69	This document documents the libev software package.
66		70
67	The newest version of this document is also available as an html-formatted	71	The newest version of this document is also available as an html-formatted
68	web page you might find easier to navigate when reading it for the first	72	web page you might find easier to navigate when reading it for the first
69	time: L<http://cvs.schmorp.de/libev/ev.html>.	73	time: L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.
		74
		75	While this document tries to be as complete as possible in documenting
		76	libev, its usage and the rationale behind its design, it is not a tutorial
		77	on event-based programming, nor will it introduce event-based programming
		78	with libev.
		79
		80	Familiarity with event based programming techniques in general is assumed
		81	throughout this document.
		82
		83	=head1 WHAT TO READ WHEN IN A HURRY
		84
		85	This manual tries to be very detailed, but unfortunately, this also makes
		86	it very long. If you just want to know the basics of libev, I suggest
		87	reading L</ANATOMY OF A WATCHER>, then the L</EXAMPLE PROGRAM> above and
		88	look up the missing functions in L</GLOBAL FUNCTIONS> and the C<ev_io> and
		89	C<ev_timer> sections in L</WATCHER TYPES>.
		90
		91	=head1 ABOUT LIBEV
70		92
71	Libev is an event loop: you register interest in certain events (such as a	93	Libev is an event loop: you register interest in certain events (such as a
72	file descriptor being readable or a timeout occurring), and it will manage	94	file descriptor being readable or a timeout occurring), and it will manage
73	these event sources and provide your program with events.	95	these event sources and provide your program with events.
74		96
…		…
84	=head2 FEATURES	106	=head2 FEATURES
85		107
86	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	108	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
87	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	109	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
88	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	110	for file descriptor events (C<ev_io>), the Linux C<inotify> interface
89	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers	111	(for C<ev_stat>), Linux eventfd/signalfd (for faster and cleaner
90	with customised rescheduling (C<ev_periodic>), synchronous signals	112	inter-thread wakeup (C<ev_async>)/signal handling (C<ev_signal>)) relative
91	(C<ev_signal>), process status change events (C<ev_child>), and event	113	timers (C<ev_timer>), absolute timers with customised rescheduling
92	watchers dealing with the event loop mechanism itself (C<ev_idle>,	114	(C<ev_periodic>), synchronous signals (C<ev_signal>), process status
93	C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as	115	change events (C<ev_child>), and event watchers dealing with the event
94	file watchers (C<ev_stat>) and even limited support for fork events	116	loop mechanism itself (C<ev_idle>, C<ev_embed>, C<ev_prepare> and
95	(C<ev_fork>).	117	C<ev_check> watchers) as well as file watchers (C<ev_stat>) and even
		118	limited support for fork events (C<ev_fork>).
96		119
97	It also is quite fast (see this	120	It also is quite fast (see this
98	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent	121	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
99	for example).	122	for example).
100		123
…		…
108	name C<loop> (which is always of type C<struct ev_loop *>) will not have	131	name C<loop> (which is always of type C<struct ev_loop *>) will not have
109	this argument.	132	this argument.
110		133
111	=head2 TIME REPRESENTATION	134	=head2 TIME REPRESENTATION
112		135
113	Libev represents time as a single floating point number, representing the	136	Libev represents time as a single floating point number, representing
114	(fractional) number of seconds since the (POSIX) epoch (somewhere near	137	the (fractional) number of seconds since the (POSIX) epoch (in practice
115	the beginning of 1970, details are complicated, don't ask). This type is	138	somewhere near the beginning of 1970, details are complicated, don't
116	called C<ev_tstamp>, which is what you should use too. It usually aliases	139	ask). This type is called C<ev_tstamp>, which is what you should use
117	to the C<double> type in C, and when you need to do any calculations on	140	too. It usually aliases to the C<double> type in C. When you need to do
118	it, you should treat it as some floatingpoint value. Unlike the name	141	any calculations on it, you should treat it as some floating point value.
		142
119	component C<stamp> might indicate, it is also used for time differences	143	Unlike the name component C<stamp> might indicate, it is also used for
120	throughout libev.	144	time differences (e.g. delays) throughout libev.
		145
		146	=head1 ERROR HANDLING
		147
		148	Libev knows three classes of errors: operating system errors, usage errors
		149	and internal errors (bugs).
		150
		151	When libev catches an operating system error it cannot handle (for example
		152	a system call indicating a condition libev cannot fix), it calls the callback
		153	set via C<ev_set_syserr_cb>, which is supposed to fix the problem or
		154	abort. The default is to print a diagnostic message and to call C<abort
		155	()>.
		156
		157	When libev detects a usage error such as a negative timer interval, then
		158	it will print a diagnostic message and abort (via the C<assert> mechanism,
		159	so C<NDEBUG> will disable this checking): these are programming errors in
		160	the libev caller and need to be fixed there.
		161
		162	Libev also has a few internal error-checking C<assert>ions, and also has
		163	extensive consistency checking code. These do not trigger under normal
		164	circumstances, as they indicate either a bug in libev or worse.
		165
121		166
122	=head1 GLOBAL FUNCTIONS	167	=head1 GLOBAL FUNCTIONS
123		168
124	These functions can be called anytime, even before initialising the	169	These functions can be called anytime, even before initialising the
125	library in any way.	170	library in any way.
…		…
128		173
129	=item ev_tstamp ev_time ()	174	=item ev_tstamp ev_time ()
130		175
131	Returns the current time as libev would use it. Please note that the	176	Returns the current time as libev would use it. Please note that the
132	C<ev_now> function is usually faster and also often returns the timestamp	177	C<ev_now> function is usually faster and also often returns the timestamp
133	you actually want to know.	178	you actually want to know. Also interesting is the combination of
		179	C<ev_now_update> and C<ev_now>.
134		180
135	=item ev_sleep (ev_tstamp interval)	181	=item ev_sleep (ev_tstamp interval)
136		182
137	Sleep for the given interval: The current thread will be blocked until	183	Sleep for the given interval: The current thread will be blocked
138	either it is interrupted or the given time interval has passed. Basically	184	until either it is interrupted or the given time interval has
		185	passed (approximately - it might return a bit earlier even if not
		186	interrupted). Returns immediately if C<< interval <= 0 >>.
		187
139	this is a subsecond-resolution C<sleep ()>.	188	Basically this is a sub-second-resolution C<sleep ()>.
		189
		190	The range of the C<interval> is limited - libev only guarantees to work
		191	with sleep times of up to one day (C<< interval <= 86400 >>).
140		192
141	=item int ev_version_major ()	193	=item int ev_version_major ()
142		194
143	=item int ev_version_minor ()	195	=item int ev_version_minor ()
144		196
…		…
155	as this indicates an incompatible change. Minor versions are usually	207	as this indicates an incompatible change. Minor versions are usually
156	compatible to older versions, so a larger minor version alone is usually	208	compatible to older versions, so a larger minor version alone is usually
157	not a problem.	209	not a problem.
158		210
159	Example: Make sure we haven't accidentally been linked against the wrong	211	Example: Make sure we haven't accidentally been linked against the wrong
160	version.	212	version (note, however, that this will not detect other ABI mismatches,
		213	such as LFS or reentrancy).
161		214
162	assert (("libev version mismatch",	215	assert (("libev version mismatch",
163	ev_version_major () == EV_VERSION_MAJOR	216	ev_version_major () == EV_VERSION_MAJOR
164	&& ev_version_minor () >= EV_VERSION_MINOR));	217	&& ev_version_minor () >= EV_VERSION_MINOR));
165		218
166	=item unsigned int ev_supported_backends ()	219	=item unsigned int ev_supported_backends ()
167		220
168	Return the set of all backends (i.e. their corresponding C<EV_BACKEND_*>	221	Return the set of all backends (i.e. their corresponding C<EV_BACKEND_*>
169	value) compiled into this binary of libev (independent of their	222	value) compiled into this binary of libev (independent of their
…		…
171	a description of the set values.	224	a description of the set values.
172		225
173	Example: make sure we have the epoll method, because yeah this is cool and	226	Example: make sure we have the epoll method, because yeah this is cool and
174	a must have and can we have a torrent of it please!!!11	227	a must have and can we have a torrent of it please!!!11
175		228
176	assert (("sorry, no epoll, no sex",	229	assert (("sorry, no epoll, no sex",
177	ev_supported_backends () & EVBACKEND_EPOLL));	230	ev_supported_backends () & EVBACKEND_EPOLL));
178		231
179	=item unsigned int ev_recommended_backends ()	232	=item unsigned int ev_recommended_backends ()
180		233
181	Return the set of all backends compiled into this binary of libev and also	234	Return the set of all backends compiled into this binary of libev and
182	recommended for this platform. This set is often smaller than the one	235	also recommended for this platform, meaning it will work for most file
		236	descriptor types. This set is often smaller than the one returned by
183	returned by C<ev_supported_backends>, as for example kqueue is broken on	237	C<ev_supported_backends>, as for example kqueue is broken on most BSDs
184	most BSDs and will not be autodetected unless you explicitly request it	238	and will not be auto-detected unless you explicitly request it (assuming
185	(assuming you know what you are doing). This is the set of backends that	239	you know what you are doing). This is the set of backends that libev will
186	libev will probe for if you specify no backends explicitly.	240	probe for if you specify no backends explicitly.
187		241
188	=item unsigned int ev_embeddable_backends ()	242	=item unsigned int ev_embeddable_backends ()
189		243
190	Returns the set of backends that are embeddable in other event loops. This	244	Returns the set of backends that are embeddable in other event loops. This
191	is the theoretical, all-platform, value. To find which backends	245	value is platform-specific but can include backends not available on the
192	might be supported on the current system, you would need to look at	246	current system. To find which embeddable backends might be supported on
193	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for	247	the current system, you would need to look at C<ev_embeddable_backends ()
194	recommended ones.	248	& ev_supported_backends ()>, likewise for recommended ones.
195		249
196	See the description of C<ev_embed> watchers for more info.	250	See the description of C<ev_embed> watchers for more info.
197		251
198	=item ev_set_allocator (void *(*cb)(void *ptr, long size))	252	=item ev_set_allocator (void *(*cb)(void *ptr, long size) throw ())
199		253
200	Sets the allocation function to use (the prototype is similar - the	254	Sets the allocation function to use (the prototype is similar - the
201	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is	255	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
202	used to allocate and free memory (no surprises here). If it returns zero	256	used to allocate and free memory (no surprises here). If it returns zero
203	when memory needs to be allocated (C<size != 0>), the library might abort	257	when memory needs to be allocated (C<size != 0>), the library might abort
…		…
229	}	283	}
230		284
231	...	285	...
232	ev_set_allocator (persistent_realloc);	286	ev_set_allocator (persistent_realloc);
233		287
234	=item ev_set_syserr_cb (void (*cb)(const char *msg));	288	=item ev_set_syserr_cb (void (*cb)(const char *msg) throw ())
235		289
236	Set the callback function to call on a retryable syscall error (such	290	Set the callback function to call on a retryable system call error (such
237	as failed select, poll, epoll_wait). The message is a printable string	291	as failed select, poll, epoll_wait). The message is a printable string
238	indicating the system call or subsystem causing the problem. If this	292	indicating the system call or subsystem causing the problem. If this
239	callback is set, then libev will expect it to remedy the sitution, no	293	callback is set, then libev will expect it to remedy the situation, no
240	matter what, when it returns. That is, libev will generally retry the	294	matter what, when it returns. That is, libev will generally retry the
241	requested operation, or, if the condition doesn't go away, do bad stuff	295	requested operation, or, if the condition doesn't go away, do bad stuff
242	(such as abort).	296	(such as abort).
243		297
244	Example: This is basically the same thing that libev does internally, too.	298	Example: This is basically the same thing that libev does internally, too.
…		…
251	}	305	}
252		306
253	...	307	...
254	ev_set_syserr_cb (fatal_error);	308	ev_set_syserr_cb (fatal_error);
255		309
		310	=item ev_feed_signal (int signum)
		311
		312	This function can be used to "simulate" a signal receive. It is completely
		313	safe to call this function at any time, from any context, including signal
		314	handlers or random threads.
		315
		316	Its main use is to customise signal handling in your process, especially
		317	in the presence of threads. For example, you could block signals
		318	by default in all threads (and specifying C<EVFLAG_NOSIGMASK> when
		319	creating any loops), and in one thread, use C<sigwait> or any other
		320	mechanism to wait for signals, then "deliver" them to libev by calling
		321	C<ev_feed_signal>.
		322
256	=back	323	=back
257		324
258	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	325	=head1 FUNCTIONS CONTROLLING EVENT LOOPS
259		326
260	An event loop is described by a C<struct ev_loop *>. The library knows two	327	An event loop is described by a C<struct ev_loop *> (the C<struct> is
261	types of such loops, the I<default> loop, which supports signals and child	328	I<not> optional in this case unless libev 3 compatibility is disabled, as
262	events, and dynamically created loops which do not.	329	libev 3 had an C<ev_loop> function colliding with the struct name).
		330
		331	The library knows two types of such loops, the I<default> loop, which
		332	supports child process events, and dynamically created event loops which
		333	do not.
263		334
264	=over 4	335	=over 4
265		336
266	=item struct ev_loop *ev_default_loop (unsigned int flags)	337	=item struct ev_loop *ev_default_loop (unsigned int flags)
267		338
268	This will initialise the default event loop if it hasn't been initialised	339	This returns the "default" event loop object, which is what you should
269	yet and return it. If the default loop could not be initialised, returns	340	normally use when you just need "the event loop". Event loop objects and
270	false. If it already was initialised it simply returns it (and ignores the	341	the C<flags> parameter are described in more detail in the entry for
271	flags. If that is troubling you, check C<ev_backend ()> afterwards).	342	C<ev_loop_new>.
		343
		344	If the default loop is already initialised then this function simply
		345	returns it (and ignores the flags. If that is troubling you, check
		346	C<ev_backend ()> afterwards). Otherwise it will create it with the given
		347	flags, which should almost always be C<0>, unless the caller is also the
		348	one calling C<ev_run> or otherwise qualifies as "the main program".
272		349
273	If you don't know what event loop to use, use the one returned from this	350	If you don't know what event loop to use, use the one returned from this
274	function.	351	function (or via the C<EV_DEFAULT> macro).
275		352
276	Note that this function is I<not> thread-safe, so if you want to use it	353	Note that this function is I<not> thread-safe, so if you want to use it
277	from multiple threads, you have to lock (note also that this is unlikely,	354	from multiple threads, you have to employ some kind of mutex (note also
278	as loops cannot bes hared easily between threads anyway).	355	that this case is unlikely, as loops cannot be shared easily between
		356	threads anyway).
279		357
280	The default loop is the only loop that can handle C<ev_signal> and	358	The default loop is the only loop that can handle C<ev_child> watchers,
281	C<ev_child> watchers, and to do this, it always registers a handler	359	and to do this, it always registers a handler for C<SIGCHLD>. If this is
282	for C<SIGCHLD>. If this is a problem for your app you can either	360	a problem for your application you can either create a dynamic loop with
283	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you	361	C<ev_loop_new> which doesn't do that, or you can simply overwrite the
284	can simply overwrite the C<SIGCHLD> signal handler I<after> calling	362	C<SIGCHLD> signal handler I<after> calling C<ev_default_init>.
285	C<ev_default_init>.	363
		364	Example: This is the most typical usage.
		365
		366	if (!ev_default_loop (0))
		367	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		368
		369	Example: Restrict libev to the select and poll backends, and do not allow
		370	environment settings to be taken into account:
		371
		372	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
		373
		374	=item struct ev_loop *ev_loop_new (unsigned int flags)
		375
		376	This will create and initialise a new event loop object. If the loop
		377	could not be initialised, returns false.
		378
		379	This function is thread-safe, and one common way to use libev with
		380	threads is indeed to create one loop per thread, and using the default
		381	loop in the "main" or "initial" thread.
286		382
287	The flags argument can be used to specify special behaviour or specific	383	The flags argument can be used to specify special behaviour or specific
288	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	384	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
289		385
290	The following flags are supported:	386	The following flags are supported:
…		…
296	The default flags value. Use this if you have no clue (it's the right	392	The default flags value. Use this if you have no clue (it's the right
297	thing, believe me).	393	thing, believe me).
298		394
299	=item C<EVFLAG_NOENV>	395	=item C<EVFLAG_NOENV>
300		396
301	If this flag bit is ored into the flag value (or the program runs setuid	397	If this flag bit is or'ed into the flag value (or the program runs setuid
302	or setgid) then libev will I<not> look at the environment variable	398	or setgid) then libev will I<not> look at the environment variable
303	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will	399	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will
304	override the flags completely if it is found in the environment. This is	400	override the flags completely if it is found in the environment. This is
305	useful to try out specific backends to test their performance, or to work	401	useful to try out specific backends to test their performance, to work
306	around bugs.	402	around bugs, or to make libev threadsafe (accessing environment variables
		403	cannot be done in a threadsafe way, but usually it works if no other
		404	thread modifies them).
307		405
308	=item C<EVFLAG_FORKCHECK>	406	=item C<EVFLAG_FORKCHECK>
309		407
310	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after	408	Instead of calling C<ev_loop_fork> manually after a fork, you can also
311	a fork, you can also make libev check for a fork in each iteration by	409	make libev check for a fork in each iteration by enabling this flag.
312	enabling this flag.
313		410
314	This works by calling C<getpid ()> on every iteration of the loop,	411	This works by calling C<getpid ()> on every iteration of the loop,
315	and thus this might slow down your event loop if you do a lot of loop	412	and thus this might slow down your event loop if you do a lot of loop
316	iterations and little real work, but is usually not noticeable (on my	413	iterations and little real work, but is usually not noticeable (on my
317	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence	414	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence
318	without a syscall and thus I<very> fast, but my GNU/Linux system also has	415	without a system call and thus I<very> fast, but my GNU/Linux system also has
319	C<pthread_atfork> which is even faster).	416	C<pthread_atfork> which is even faster).
320		417
321	The big advantage of this flag is that you can forget about fork (and	418	The big advantage of this flag is that you can forget about fork (and
322	forget about forgetting to tell libev about forking) when you use this	419	forget about forgetting to tell libev about forking) when you use this
323	flag.	420	flag.
324		421
325	This flag setting cannot be overriden or specified in the C<LIBEV_FLAGS>	422	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>
326	environment variable.	423	environment variable.
		424
		425	=item C<EVFLAG_NOINOTIFY>
		426
		427	When this flag is specified, then libev will not attempt to use the
		428	I<inotify> API for its C<ev_stat> watchers. Apart from debugging and
		429	testing, this flag can be useful to conserve inotify file descriptors, as
		430	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.
		431
		432	=item C<EVFLAG_SIGNALFD>
		433
		434	When this flag is specified, then libev will attempt to use the
		435	I<signalfd> API for its C<ev_signal> (and C<ev_child>) watchers. This API
		436	delivers signals synchronously, which makes it both faster and might make
		437	it possible to get the queued signal data. It can also simplify signal
		438	handling with threads, as long as you properly block signals in your
		439	threads that are not interested in handling them.
		440
		441	Signalfd will not be used by default as this changes your signal mask, and
		442	there are a lot of shoddy libraries and programs (glib's threadpool for
		443	example) that can't properly initialise their signal masks.
		444
		445	=item C<EVFLAG_NOSIGMASK>
		446
		447	When this flag is specified, then libev will avoid to modify the signal
		448	mask. Specifically, this means you have to make sure signals are unblocked
		449	when you want to receive them.
		450
		451	This behaviour is useful when you want to do your own signal handling, or
		452	want to handle signals only in specific threads and want to avoid libev
		453	unblocking the signals.
		454
		455	It's also required by POSIX in a threaded program, as libev calls
		456	C<sigprocmask>, whose behaviour is officially unspecified.
		457
		458	This flag's behaviour will become the default in future versions of libev.
327		459
328	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	460	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
329		461
330	This is your standard select(2) backend. Not I<completely> standard, as	462	This is your standard select(2) backend. Not I<completely> standard, as
331	libev tries to roll its own fd_set with no limits on the number of fds,	463	libev tries to roll its own fd_set with no limits on the number of fds,
332	but if that fails, expect a fairly low limit on the number of fds when	464	but if that fails, expect a fairly low limit on the number of fds when
333	using this backend. It doesn't scale too well (O(highest_fd)), but its	465	using this backend. It doesn't scale too well (O(highest_fd)), but its
334	usually the fastest backend for a low number of (low-numbered :) fds.	466	usually the fastest backend for a low number of (low-numbered :) fds.
335		467
336	To get good performance out of this backend you need a high amount of	468	To get good performance out of this backend you need a high amount of
337	parallelity (most of the file descriptors should be busy). If you are	469	parallelism (most of the file descriptors should be busy). If you are
338	writing a server, you should C<accept ()> in a loop to accept as many	470	writing a server, you should C<accept ()> in a loop to accept as many
339	connections as possible during one iteration. You might also want to have	471	connections as possible during one iteration. You might also want to have
340	a look at C<ev_set_io_collect_interval ()> to increase the amount of	472	a look at C<ev_set_io_collect_interval ()> to increase the amount of
341	readyness notifications you get per iteration.	473	readiness notifications you get per iteration.
		474
		475	This backend maps C<EV_READ> to the C<readfds> set and C<EV_WRITE> to the
		476	C<writefds> set (and to work around Microsoft Windows bugs, also onto the
		477	C<exceptfds> set on that platform).
342		478
343	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)	479	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)
344		480
345	And this is your standard poll(2) backend. It's more complicated	481	And this is your standard poll(2) backend. It's more complicated
346	than select, but handles sparse fds better and has no artificial	482	than select, but handles sparse fds better and has no artificial
347	limit on the number of fds you can use (except it will slow down	483	limit on the number of fds you can use (except it will slow down
348	considerably with a lot of inactive fds). It scales similarly to select,	484	considerably with a lot of inactive fds). It scales similarly to select,
349	i.e. O(total_fds). See the entry for C<EVBACKEND_SELECT>, above, for	485	i.e. O(total_fds). See the entry for C<EVBACKEND_SELECT>, above, for
350	performance tips.	486	performance tips.
351		487
		488	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and
		489	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.
		490
352	=item C<EVBACKEND_EPOLL> (value 4, Linux)	491	=item C<EVBACKEND_EPOLL> (value 4, Linux)
353		492
		493	Use the linux-specific epoll(7) interface (for both pre- and post-2.6.9
		494	kernels).
		495
354	For few fds, this backend is a bit little slower than poll and select,	496	For few fds, this backend is a bit little slower than poll and select, but
355	but it scales phenomenally better. While poll and select usually scale	497	it scales phenomenally better. While poll and select usually scale like
356	like O(total_fds) where n is the total number of fds (or the highest fd),	498	O(total_fds) where total_fds is the total number of fds (or the highest
357	epoll scales either O(1) or O(active_fds). The epoll design has a number	499	fd), epoll scales either O(1) or O(active_fds).
358	of shortcomings, such as silently dropping events in some hard-to-detect	500
359	cases and requiring a syscall per fd change, no fork support and bad	501	The epoll mechanism deserves honorable mention as the most misdesigned
360	support for dup.	502	of the more advanced event mechanisms: mere annoyances include silently
		503	dropping file descriptors, requiring a system call per change per file
		504	descriptor (and unnecessary guessing of parameters), problems with dup,
		505	returning before the timeout value, resulting in additional iterations
		506	(and only giving 5ms accuracy while select on the same platform gives
		507	0.1ms) and so on. The biggest issue is fork races, however - if a program
		508	forks then I<both> parent and child process have to recreate the epoll
		509	set, which can take considerable time (one syscall per file descriptor)
		510	and is of course hard to detect.
		511
		512	Epoll is also notoriously buggy - embedding epoll fds I<should> work,
		513	but of course I<doesn't>, and epoll just loves to report events for
		514	totally I<different> file descriptors (even already closed ones, so
		515	one cannot even remove them from the set) than registered in the set
		516	(especially on SMP systems). Libev tries to counter these spurious
		517	notifications by employing an additional generation counter and comparing
		518	that against the events to filter out spurious ones, recreating the set
		519	when required. Epoll also erroneously rounds down timeouts, but gives you
		520	no way to know when and by how much, so sometimes you have to busy-wait
		521	because epoll returns immediately despite a nonzero timeout. And last
		522	not least, it also refuses to work with some file descriptors which work
		523	perfectly fine with C<select> (files, many character devices...).
		524
		525	Epoll is truly the train wreck among event poll mechanisms, a frankenpoll,
		526	cobbled together in a hurry, no thought to design or interaction with
		527	others. Oh, the pain, will it ever stop...
361		528
362	While stopping, setting and starting an I/O watcher in the same iteration	529	While stopping, setting and starting an I/O watcher in the same iteration
363	will result in some caching, there is still a syscall per such incident	530	will result in some caching, there is still a system call per such
364	(because the fd could point to a different file description now), so its	531	incident (because the same I<file descriptor> could point to a different
365	best to avoid that. Also, C<dup ()>'ed file descriptors might not work	532	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed
366	very well if you register events for both fds.	533	file descriptors might not work very well if you register events for both
367		534	file descriptors.
368	Please note that epoll sometimes generates spurious notifications, so you
369	need to use non-blocking I/O or other means to avoid blocking when no data
370	(or space) is available.
371		535
372	Best performance from this backend is achieved by not unregistering all	536	Best performance from this backend is achieved by not unregistering all
373	watchers for a file descriptor until it has been closed, if possible, i.e.	537	watchers for a file descriptor until it has been closed, if possible,
374	keep at least one watcher active per fd at all times.	538	i.e. keep at least one watcher active per fd at all times. Stopping and
		539	starting a watcher (without re-setting it) also usually doesn't cause
		540	extra overhead. A fork can both result in spurious notifications as well
		541	as in libev having to destroy and recreate the epoll object, which can
		542	take considerable time and thus should be avoided.
375		543
		544	All this means that, in practice, C<EVBACKEND_SELECT> can be as fast or
		545	faster than epoll for maybe up to a hundred file descriptors, depending on
		546	the usage. So sad.
		547
376	While nominally embeddeble in other event loops, this feature is broken in	548	While nominally embeddable in other event loops, this feature is broken in
377	all kernel versions tested so far.	549	all kernel versions tested so far.
		550
		551	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
		552	C<EVBACKEND_POLL>.
378		553
379	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	554	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
380		555
381	Kqueue deserves special mention, as at the time of this writing, it	556	Kqueue deserves special mention, as at the time of this writing, it
382	was broken on all BSDs except NetBSD (usually it doesn't work reliably	557	was broken on all BSDs except NetBSD (usually it doesn't work reliably
383	with anything but sockets and pipes, except on Darwin, where of course	558	with anything but sockets and pipes, except on Darwin, where of course
384	it's completely useless). For this reason it's not being "autodetected"	559	it's completely useless). Unlike epoll, however, whose brokenness
		560	is by design, these kqueue bugs can (and eventually will) be fixed
		561	without API changes to existing programs. For this reason it's not being
385	unless you explicitly specify it explicitly in the flags (i.e. using	562	"auto-detected" unless you explicitly specify it in the flags (i.e. using
386	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)	563	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)
387	system like NetBSD.	564	system like NetBSD.
388		565
389	You still can embed kqueue into a normal poll or select backend and use it	566	You still can embed kqueue into a normal poll or select backend and use it
390	only for sockets (after having made sure that sockets work with kqueue on	567	only for sockets (after having made sure that sockets work with kqueue on
391	the target platform). See C<ev_embed> watchers for more info.	568	the target platform). See C<ev_embed> watchers for more info.
392		569
393	It scales in the same way as the epoll backend, but the interface to the	570	It scales in the same way as the epoll backend, but the interface to the
394	kernel is more efficient (which says nothing about its actual speed, of	571	kernel is more efficient (which says nothing about its actual speed, of
395	course). While stopping, setting and starting an I/O watcher does never	572	course). While stopping, setting and starting an I/O watcher does never
396	cause an extra syscall as with C<EVBACKEND_EPOLL>, it still adds up to	573	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to
397	two event changes per incident, support for C<fork ()> is very bad and it	574	two event changes per incident. Support for C<fork ()> is very bad (you
		575	might have to leak fd's on fork, but it's more sane than epoll) and it
398	drops fds silently in similarly hard-to-detect cases.	576	drops fds silently in similarly hard-to-detect cases.
399		577
400	This backend usually performs well under most conditions.	578	This backend usually performs well under most conditions.
401		579
402	While nominally embeddable in other event loops, this doesn't work	580	While nominally embeddable in other event loops, this doesn't work
403	everywhere, so you might need to test for this. And since it is broken	581	everywhere, so you might need to test for this. And since it is broken
404	almost everywhere, you should only use it when you have a lot of sockets	582	almost everywhere, you should only use it when you have a lot of sockets
405	(for which it usually works), by embedding it into another event loop	583	(for which it usually works), by embedding it into another event loop
406	(e.g. C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>) and using it only for	584	(e.g. C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> (but C<poll> is of course
407	sockets.	585	also broken on OS X)) and, did I mention it, using it only for sockets.
		586
		587	This backend maps C<EV_READ> into an C<EVFILT_READ> kevent with
		588	C<NOTE_EOF>, and C<EV_WRITE> into an C<EVFILT_WRITE> kevent with
		589	C<NOTE_EOF>.
408		590
409	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)	591	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)
410		592
411	This is not implemented yet (and might never be, unless you send me an	593	This is not implemented yet (and might never be, unless you send me an
412	implementation). According to reports, C</dev/poll> only supports sockets	594	implementation). According to reports, C</dev/poll> only supports sockets
…		…
416	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	598	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
417		599
418	This uses the Solaris 10 event port mechanism. As with everything on Solaris,	600	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
419	it's really slow, but it still scales very well (O(active_fds)).	601	it's really slow, but it still scales very well (O(active_fds)).
420		602
421	Please note that solaris event ports can deliver a lot of spurious
422	notifications, so you need to use non-blocking I/O or other means to avoid
423	blocking when no data (or space) is available.
424
425	While this backend scales well, it requires one system call per active	603	While this backend scales well, it requires one system call per active
426	file descriptor per loop iteration. For small and medium numbers of file	604	file descriptor per loop iteration. For small and medium numbers of file
427	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend	605	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
428	might perform better.	606	might perform better.
429		607
430	On the positive side, ignoring the spurious readyness notifications, this	608	On the positive side, this backend actually performed fully to
431	backend actually performed to specification in all tests and is fully	609	specification in all tests and is fully embeddable, which is a rare feat
432	embeddable, which is a rare feat among the OS-specific backends.	610	among the OS-specific backends (I vastly prefer correctness over speed
		611	hacks).
		612
		613	On the negative side, the interface is I<bizarre> - so bizarre that
		614	even sun itself gets it wrong in their code examples: The event polling
		615	function sometimes returns events to the caller even though an error
		616	occurred, but with no indication whether it has done so or not (yes, it's
		617	even documented that way) - deadly for edge-triggered interfaces where you
		618	absolutely have to know whether an event occurred or not because you have
		619	to re-arm the watcher.
		620
		621	Fortunately libev seems to be able to work around these idiocies.
		622
		623	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
		624	C<EVBACKEND_POLL>.
433		625
434	=item C<EVBACKEND_ALL>	626	=item C<EVBACKEND_ALL>
435		627
436	Try all backends (even potentially broken ones that wouldn't be tried	628	Try all backends (even potentially broken ones that wouldn't be tried
437	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	629	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
438	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	630	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
439		631
440	It is definitely not recommended to use this flag.	632	It is definitely not recommended to use this flag, use whatever
		633	C<ev_recommended_backends ()> returns, or simply do not specify a backend
		634	at all.
		635
		636	=item C<EVBACKEND_MASK>
		637
		638	Not a backend at all, but a mask to select all backend bits from a
		639	C<flags> value, in case you want to mask out any backends from a flags
		640	value (e.g. when modifying the C<LIBEV_FLAGS> environment variable).
441		641
442	=back	642	=back
443		643
444	If one or more of these are ored into the flags value, then only these	644	If one or more of the backend flags are or'ed into the flags value,
445	backends will be tried (in the reverse order as listed here). If none are	645	then only these backends will be tried (in the reverse order as listed
446	specified, all backends in C<ev_recommended_backends ()> will be tried.	646	here). If none are specified, all backends in C<ev_recommended_backends
447		647	()> will be tried.
448	The most typical usage is like this:
449
450	if (!ev_default_loop (0))
451	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
452
453	Restrict libev to the select and poll backends, and do not allow
454	environment settings to be taken into account:
455
456	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
457
458	Use whatever libev has to offer, but make sure that kqueue is used if
459	available (warning, breaks stuff, best use only with your own private
460	event loop and only if you know the OS supports your types of fds):
461
462	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
463
464	=item struct ev_loop *ev_loop_new (unsigned int flags)
465
466	Similar to C<ev_default_loop>, but always creates a new event loop that is
467	always distinct from the default loop. Unlike the default loop, it cannot
468	handle signal and child watchers, and attempts to do so will be greeted by
469	undefined behaviour (or a failed assertion if assertions are enabled).
470
471	Note that this function I<is> thread-safe, and the recommended way to use
472	libev with threads is indeed to create one loop per thread, and using the
473	default loop in the "main" or "initial" thread.
474		648
475	Example: Try to create a event loop that uses epoll and nothing else.	649	Example: Try to create a event loop that uses epoll and nothing else.
476		650
477	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	651	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
478	if (!epoller)	652	if (!epoller)
479	fatal ("no epoll found here, maybe it hides under your chair");	653	fatal ("no epoll found here, maybe it hides under your chair");
480		654
		655	Example: Use whatever libev has to offer, but make sure that kqueue is
		656	used if available.
		657
		658	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_KQUEUE);
		659
481	=item ev_default_destroy ()	660	=item ev_loop_destroy (loop)
482		661
483	Destroys the default loop again (frees all memory and kernel state	662	Destroys an event loop object (frees all memory and kernel state
484	etc.). None of the active event watchers will be stopped in the normal	663	etc.). None of the active event watchers will be stopped in the normal
485	sense, so e.g. C<ev_is_active> might still return true. It is your	664	sense, so e.g. C<ev_is_active> might still return true. It is your
486	responsibility to either stop all watchers cleanly yoursef I<before>	665	responsibility to either stop all watchers cleanly yourself I<before>
487	calling this function, or cope with the fact afterwards (which is usually	666	calling this function, or cope with the fact afterwards (which is usually
488	the easiest thing, you can just ignore the watchers and/or C<free ()> them	667	the easiest thing, you can just ignore the watchers and/or C<free ()> them
489	for example).	668	for example).
490		669
491	Note that certain global state, such as signal state, will not be freed by	670	Note that certain global state, such as signal state (and installed signal
492	this function, and related watchers (such as signal and child watchers)	671	handlers), will not be freed by this function, and related watchers (such
493	would need to be stopped manually.	672	as signal and child watchers) would need to be stopped manually.
494		673
495	In general it is not advisable to call this function except in the	674	This function is normally used on loop objects allocated by
496	rare occasion where you really need to free e.g. the signal handling	675	C<ev_loop_new>, but it can also be used on the default loop returned by
		676	C<ev_default_loop>, in which case it is not thread-safe.
		677
		678	Note that it is not advisable to call this function on the default loop
		679	except in the rare occasion where you really need to free its resources.
497	pipe fds. If you need dynamically allocated loops it is better to use	680	If you need dynamically allocated loops it is better to use C<ev_loop_new>
498	C<ev_loop_new> and C<ev_loop_destroy>).	681	and C<ev_loop_destroy>.
499		682
500	=item ev_loop_destroy (loop)	683	=item ev_loop_fork (loop)
501		684
502	Like C<ev_default_destroy>, but destroys an event loop created by an
503	earlier call to C<ev_loop_new>.
504
505	=item ev_default_fork ()
506
507	This function sets a flag that causes subsequent C<ev_loop> iterations	685	This function sets a flag that causes subsequent C<ev_run> iterations to
508	to reinitialise the kernel state for backends that have one. Despite the	686	reinitialise the kernel state for backends that have one. Despite the
509	name, you can call it anytime, but it makes most sense after forking, in	687	name, you can call it anytime, but it makes most sense after forking, in
510	the child process (or both child and parent, but that again makes little	688	the child process. You I<must> call it (or use C<EVFLAG_FORKCHECK>) in the
511	sense). You I<must> call it in the child before using any of the libev	689	child before resuming or calling C<ev_run>.
512	functions, and it will only take effect at the next C<ev_loop> iteration.	690
		691	Again, you I<have> to call it on I<any> loop that you want to re-use after
		692	a fork, I<even if you do not plan to use the loop in the parent>. This is
		693	because some kernel interfaces *cough* I<kqueue> *cough* do funny things
		694	during fork.
513		695
514	On the other hand, you only need to call this function in the child	696	On the other hand, you only need to call this function in the child
515	process if and only if you want to use the event library in the child. If	697	process if and only if you want to use the event loop in the child. If
516	you just fork+exec, you don't have to call it at all.	698	you just fork+exec or create a new loop in the child, you don't have to
		699	call it at all (in fact, C<epoll> is so badly broken that it makes a
		700	difference, but libev will usually detect this case on its own and do a
		701	costly reset of the backend).
517		702
518	The function itself is quite fast and it's usually not a problem to call	703	The function itself is quite fast and it's usually not a problem to call
519	it just in case after a fork. To make this easy, the function will fit in	704	it just in case after a fork.
520	quite nicely into a call to C<pthread_atfork>:
521		705
		706	Example: Automate calling C<ev_loop_fork> on the default loop when
		707	using pthreads.
		708
		709	static void
		710	post_fork_child (void)
		711	{
		712	ev_loop_fork (EV_DEFAULT);
		713	}
		714
		715	...
522	pthread_atfork (0, 0, ev_default_fork);	716	pthread_atfork (0, 0, post_fork_child);
523
524	=item ev_loop_fork (loop)
525
526	Like C<ev_default_fork>, but acts on an event loop created by
527	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
528	after fork, and how you do this is entirely your own problem.
529		717
530	=item int ev_is_default_loop (loop)	718	=item int ev_is_default_loop (loop)
531		719
532	Returns true when the given loop actually is the default loop, false otherwise.	720	Returns true when the given loop is, in fact, the default loop, and false
		721	otherwise.
533		722
534	=item unsigned int ev_loop_count (loop)	723	=item unsigned int ev_iteration (loop)
535		724
536	Returns the count of loop iterations for the loop, which is identical to	725	Returns the current iteration count for the event loop, which is identical
537	the number of times libev did poll for new events. It starts at C<0> and	726	to the number of times libev did poll for new events. It starts at C<0>
538	happily wraps around with enough iterations.	727	and happily wraps around with enough iterations.
539		728
540	This value can sometimes be useful as a generation counter of sorts (it	729	This value can sometimes be useful as a generation counter of sorts (it
541	"ticks" the number of loop iterations), as it roughly corresponds with	730	"ticks" the number of loop iterations), as it roughly corresponds with
542	C<ev_prepare> and C<ev_check> calls.	731	C<ev_prepare> and C<ev_check> calls - and is incremented between the
		732	prepare and check phases.
		733
		734	=item unsigned int ev_depth (loop)
		735
		736	Returns the number of times C<ev_run> was entered minus the number of
		737	times C<ev_run> was exited normally, in other words, the recursion depth.
		738
		739	Outside C<ev_run>, this number is zero. In a callback, this number is
		740	C<1>, unless C<ev_run> was invoked recursively (or from another thread),
		741	in which case it is higher.
		742
		743	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread,
		744	throwing an exception etc.), doesn't count as "exit" - consider this
		745	as a hint to avoid such ungentleman-like behaviour unless it's really
		746	convenient, in which case it is fully supported.
543		747
544	=item unsigned int ev_backend (loop)	748	=item unsigned int ev_backend (loop)
545		749
546	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	750	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
547	use.	751	use.
…		…
552	received events and started processing them. This timestamp does not	756	received events and started processing them. This timestamp does not
553	change as long as callbacks are being processed, and this is also the base	757	change as long as callbacks are being processed, and this is also the base
554	time used for relative timers. You can treat it as the timestamp of the	758	time used for relative timers. You can treat it as the timestamp of the
555	event occurring (or more correctly, libev finding out about it).	759	event occurring (or more correctly, libev finding out about it).
556		760
		761	=item ev_now_update (loop)
		762
		763	Establishes the current time by querying the kernel, updating the time
		764	returned by C<ev_now ()> in the progress. This is a costly operation and
		765	is usually done automatically within C<ev_run ()>.
		766
		767	This function is rarely useful, but when some event callback runs for a
		768	very long time without entering the event loop, updating libev's idea of
		769	the current time is a good idea.
		770
		771	See also L</The special problem of time updates> in the C<ev_timer> section.
		772
		773	=item ev_suspend (loop)
		774
		775	=item ev_resume (loop)
		776
		777	These two functions suspend and resume an event loop, for use when the
		778	loop is not used for a while and timeouts should not be processed.
		779
		780	A typical use case would be an interactive program such as a game: When
		781	the user presses C<^Z> to suspend the game and resumes it an hour later it
		782	would be best to handle timeouts as if no time had actually passed while
		783	the program was suspended. This can be achieved by calling C<ev_suspend>
		784	in your C<SIGTSTP> handler, sending yourself a C<SIGSTOP> and calling
		785	C<ev_resume> directly afterwards to resume timer processing.
		786
		787	Effectively, all C<ev_timer> watchers will be delayed by the time spend
		788	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers
		789	will be rescheduled (that is, they will lose any events that would have
		790	occurred while suspended).
		791
		792	After calling C<ev_suspend> you B<must not> call I<any> function on the
		793	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>
		794	without a previous call to C<ev_suspend>.
		795
		796	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the
		797	event loop time (see C<ev_now_update>).
		798
557	=item ev_loop (loop, int flags)	799	=item bool ev_run (loop, int flags)
558		800
559	Finally, this is it, the event handler. This function usually is called	801	Finally, this is it, the event handler. This function usually is called
560	after you initialised all your watchers and you want to start handling	802	after you have initialised all your watchers and you want to start
561	events.	803	handling events. It will ask the operating system for any new events, call
		804	the watcher callbacks, and then repeat the whole process indefinitely: This
		805	is why event loops are called I<loops>.
562		806
563	If the flags argument is specified as C<0>, it will not return until	807	If the flags argument is specified as C<0>, it will keep handling events
564	either no event watchers are active anymore or C<ev_unloop> was called.	808	until either no event watchers are active anymore or C<ev_break> was
		809	called.
565		810
		811	The return value is false if there are no more active watchers (which
		812	usually means "all jobs done" or "deadlock"), and true in all other cases
		813	(which usually means " you should call C<ev_run> again").
		814
566	Please note that an explicit C<ev_unloop> is usually better than	815	Please note that an explicit C<ev_break> is usually better than
567	relying on all watchers to be stopped when deciding when a program has	816	relying on all watchers to be stopped when deciding when a program has
568	finished (especially in interactive programs), but having a program that	817	finished (especially in interactive programs), but having a program
569	automatically loops as long as it has to and no longer by virtue of	818	that automatically loops as long as it has to and no longer by virtue
570	relying on its watchers stopping correctly is a thing of beauty.	819	of relying on its watchers stopping correctly, that is truly a thing of
		820	beauty.
571		821
		822	This function is I<mostly> exception-safe - you can break out of a
		823	C<ev_run> call by calling C<longjmp> in a callback, throwing a C++
		824	exception and so on. This does not decrement the C<ev_depth> value, nor
		825	will it clear any outstanding C<EVBREAK_ONE> breaks.
		826
572	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle	827	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle
573	those events and any outstanding ones, but will not block your process in	828	those events and any already outstanding ones, but will not wait and
574	case there are no events and will return after one iteration of the loop.	829	block your process in case there are no events and will return after one
		830	iteration of the loop. This is sometimes useful to poll and handle new
		831	events while doing lengthy calculations, to keep the program responsive.
575		832
576	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if	833	A flags value of C<EVRUN_ONCE> will look for new events (waiting if
577	neccessary) and will handle those and any outstanding ones. It will block	834	necessary) and will handle those and any already outstanding ones. It
578	your process until at least one new event arrives, and will return after	835	will block your process until at least one new event arrives (which could
579	one iteration of the loop. This is useful if you are waiting for some	836	be an event internal to libev itself, so there is no guarantee that a
580	external event in conjunction with something not expressible using other	837	user-registered callback will be called), and will return after one
		838	iteration of the loop.
		839
		840	This is useful if you are waiting for some external event in conjunction
		841	with something not expressible using other libev watchers (i.e. "roll your
581	libev watchers. However, a pair of C<ev_prepare>/C<ev_check> watchers is	842	own C<ev_run>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is
582	usually a better approach for this kind of thing.	843	usually a better approach for this kind of thing.
583		844
584	Here are the gory details of what C<ev_loop> does:	845	Here are the gory details of what C<ev_run> does (this is for your
		846	understanding, not a guarantee that things will work exactly like this in
		847	future versions):
585		848
		849	- Increment loop depth.
		850	- Reset the ev_break status.
586	- Before the first iteration, call any pending watchers.	851	- Before the first iteration, call any pending watchers.
		852	LOOP:
587	* If EVFLAG_FORKCHECK was used, check for a fork.	853	- If EVFLAG_FORKCHECK was used, check for a fork.
588	- If a fork was detected, queue and call all fork watchers.	854	- If a fork was detected (by any means), queue and call all fork watchers.
589	- Queue and call all prepare watchers.	855	- Queue and call all prepare watchers.
		856	- If ev_break was called, goto FINISH.
590	- If we have been forked, recreate the kernel state.	857	- If we have been forked, detach and recreate the kernel state
		858	as to not disturb the other process.
591	- Update the kernel state with all outstanding changes.	859	- Update the kernel state with all outstanding changes.
592	- Update the "event loop time".	860	- Update the "event loop time" (ev_now ()).
593	- Calculate for how long to sleep or block, if at all	861	- Calculate for how long to sleep or block, if at all
594	(active idle watchers, EVLOOP_NONBLOCK or not having	862	(active idle watchers, EVRUN_NOWAIT or not having
595	any active watchers at all will result in not sleeping).	863	any active watchers at all will result in not sleeping).
596	- Sleep if the I/O and timer collect interval say so.	864	- Sleep if the I/O and timer collect interval say so.
		865	- Increment loop iteration counter.
597	- Block the process, waiting for any events.	866	- Block the process, waiting for any events.
598	- Queue all outstanding I/O (fd) events.	867	- Queue all outstanding I/O (fd) events.
599	- Update the "event loop time" and do time jump handling.	868	- Update the "event loop time" (ev_now ()), and do time jump adjustments.
600	- Queue all outstanding timers.	869	- Queue all expired timers.
601	- Queue all outstanding periodics.	870	- Queue all expired periodics.
602	- If no events are pending now, queue all idle watchers.	871	- Queue all idle watchers with priority higher than that of pending events.
603	- Queue all check watchers.	872	- Queue all check watchers.
604	- Call all queued watchers in reverse order (i.e. check watchers first).	873	- Call all queued watchers in reverse order (i.e. check watchers first).
605	Signals and child watchers are implemented as I/O watchers, and will	874	Signals and child watchers are implemented as I/O watchers, and will
606	be handled here by queueing them when their watcher gets executed.	875	be handled here by queueing them when their watcher gets executed.
607	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	876	- If ev_break has been called, or EVRUN_ONCE or EVRUN_NOWAIT
608	were used, or there are no active watchers, return, otherwise	877	were used, or there are no active watchers, goto FINISH, otherwise
609	continue with step *.	878	continue with step LOOP.
		879	FINISH:
		880	- Reset the ev_break status iff it was EVBREAK_ONE.
		881	- Decrement the loop depth.
		882	- Return.
610		883
611	Example: Queue some jobs and then loop until no events are outstanding	884	Example: Queue some jobs and then loop until no events are outstanding
612	anymore.	885	anymore.
613		886
614	... queue jobs here, make sure they register event watchers as long	887	... queue jobs here, make sure they register event watchers as long
615	... as they still have work to do (even an idle watcher will do..)	888	... as they still have work to do (even an idle watcher will do..)
616	ev_loop (my_loop, 0);	889	ev_run (my_loop, 0);
617	... jobs done. yeah!	890	... jobs done or somebody called break. yeah!
618		891
619	=item ev_unloop (loop, how)	892	=item ev_break (loop, how)
620		893
621	Can be used to make a call to C<ev_loop> return early (but only after it	894	Can be used to make a call to C<ev_run> return early (but only after it
622	has processed all outstanding events). The C<how> argument must be either	895	has processed all outstanding events). The C<how> argument must be either
623	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	896	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or
624	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	897	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.
625		898
626	This "unloop state" will be cleared when entering C<ev_loop> again.	899	This "break state" will be cleared on the next call to C<ev_run>.
		900
		901	It is safe to call C<ev_break> from outside any C<ev_run> calls, too, in
		902	which case it will have no effect.
627		903
628	=item ev_ref (loop)	904	=item ev_ref (loop)
629		905
630	=item ev_unref (loop)	906	=item ev_unref (loop)
631		907
632	Ref/unref can be used to add or remove a reference count on the event	908	Ref/unref can be used to add or remove a reference count on the event
633	loop: Every watcher keeps one reference, and as long as the reference	909	loop: Every watcher keeps one reference, and as long as the reference
634	count is nonzero, C<ev_loop> will not return on its own. If you have	910	count is nonzero, C<ev_run> will not return on its own.
635	a watcher you never unregister that should not keep C<ev_loop> from	911
636	returning, ev_unref() after starting, and ev_ref() before stopping it. For	912	This is useful when you have a watcher that you never intend to
		913	unregister, but that nevertheless should not keep C<ev_run> from
		914	returning. In such a case, call C<ev_unref> after starting, and C<ev_ref>
		915	before stopping it.
		916
637	example, libev itself uses this for its internal signal pipe: It is not	917	As an example, libev itself uses this for its internal signal pipe: It
638	visible to the libev user and should not keep C<ev_loop> from exiting if	918	is not visible to the libev user and should not keep C<ev_run> from
639	no event watchers registered by it are active. It is also an excellent	919	exiting if no event watchers registered by it are active. It is also an
640	way to do this for generic recurring timers or from within third-party	920	excellent way to do this for generic recurring timers or from within
641	libraries. Just remember to I<unref after start> and I<ref before stop>	921	third-party libraries. Just remember to I<unref after start> and I<ref
642	(but only if the watcher wasn't active before, or was active before,	922	before stop> (but only if the watcher wasn't active before, or was active
643	respectively).	923	before, respectively. Note also that libev might stop watchers itself
		924	(e.g. non-repeating timers) in which case you have to C<ev_ref>
		925	in the callback).
644		926
645	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	927	Example: Create a signal watcher, but keep it from keeping C<ev_run>
646	running when nothing else is active.	928	running when nothing else is active.
647		929
648	struct ev_signal exitsig;	930	ev_signal exitsig;
649	ev_signal_init (&exitsig, sig_cb, SIGINT);	931	ev_signal_init (&exitsig, sig_cb, SIGINT);
650	ev_signal_start (loop, &exitsig);	932	ev_signal_start (loop, &exitsig);
651	evf_unref (loop);	933	ev_unref (loop);
652		934
653	Example: For some weird reason, unregister the above signal handler again.	935	Example: For some weird reason, unregister the above signal handler again.
654		936
655	ev_ref (loop);	937	ev_ref (loop);
656	ev_signal_stop (loop, &exitsig);	938	ev_signal_stop (loop, &exitsig);
657		939
658	=item ev_set_io_collect_interval (loop, ev_tstamp interval)	940	=item ev_set_io_collect_interval (loop, ev_tstamp interval)
659		941
660	=item ev_set_timeout_collect_interval (loop, ev_tstamp interval)	942	=item ev_set_timeout_collect_interval (loop, ev_tstamp interval)
661		943
662	These advanced functions influence the time that libev will spend waiting	944	These advanced functions influence the time that libev will spend waiting
663	for events. Both are by default C<0>, meaning that libev will try to	945	for events. Both time intervals are by default C<0>, meaning that libev
664	invoke timer/periodic callbacks and I/O callbacks with minimum latency.	946	will try to invoke timer/periodic callbacks and I/O callbacks with minimum
		947	latency.
665		948
666	Setting these to a higher value (the C<interval> I<must> be >= C<0>)	949	Setting these to a higher value (the C<interval> I<must> be >= C<0>)
667	allows libev to delay invocation of I/O and timer/periodic callbacks to	950	allows libev to delay invocation of I/O and timer/periodic callbacks
668	increase efficiency of loop iterations.	951	to increase efficiency of loop iterations (or to increase power-saving
		952	opportunities).
669		953
670	The background is that sometimes your program runs just fast enough to	954	The idea is that sometimes your program runs just fast enough to handle
671	handle one (or very few) event(s) per loop iteration. While this makes	955	one (or very few) event(s) per loop iteration. While this makes the
672	the program responsive, it also wastes a lot of CPU time to poll for new	956	program responsive, it also wastes a lot of CPU time to poll for new
673	events, especially with backends like C<select ()> which have a high	957	events, especially with backends like C<select ()> which have a high
674	overhead for the actual polling but can deliver many events at once.	958	overhead for the actual polling but can deliver many events at once.
675		959
676	By setting a higher I<io collect interval> you allow libev to spend more	960	By setting a higher I<io collect interval> you allow libev to spend more
677	time collecting I/O events, so you can handle more events per iteration,	961	time collecting I/O events, so you can handle more events per iteration,
678	at the cost of increasing latency. Timeouts (both C<ev_periodic> and	962	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
679	C<ev_timer>) will be not affected. Setting this to a non-null value will	963	C<ev_timer>) will not be affected. Setting this to a non-null value will
680	introduce an additional C<ev_sleep ()> call into most loop iterations.	964	introduce an additional C<ev_sleep ()> call into most loop iterations. The
		965	sleep time ensures that libev will not poll for I/O events more often then
		966	once per this interval, on average (as long as the host time resolution is
		967	good enough).
681		968
682	Likewise, by setting a higher I<timeout collect interval> you allow libev	969	Likewise, by setting a higher I<timeout collect interval> you allow libev
683	to spend more time collecting timeouts, at the expense of increased	970	to spend more time collecting timeouts, at the expense of increased
684	latency (the watcher callback will be called later). C<ev_io> watchers	971	latency/jitter/inexactness (the watcher callback will be called
685	will not be affected. Setting this to a non-null value will not introduce	972	later). C<ev_io> watchers will not be affected. Setting this to a non-null
686	any overhead in libev.	973	value will not introduce any overhead in libev.
687		974
688	Many (busy) programs can usually benefit by setting the io collect	975	Many (busy) programs can usually benefit by setting the I/O collect
689	interval to a value near C<0.1> or so, which is often enough for	976	interval to a value near C<0.1> or so, which is often enough for
690	interactive servers (of course not for games), likewise for timeouts. It	977	interactive servers (of course not for games), likewise for timeouts. It
691	usually doesn't make much sense to set it to a lower value than C<0.01>,	978	usually doesn't make much sense to set it to a lower value than C<0.01>,
692	as this approsaches the timing granularity of most systems.	979	as this approaches the timing granularity of most systems. Note that if
		980	you do transactions with the outside world and you can't increase the
		981	parallelity, then this setting will limit your transaction rate (if you
		982	need to poll once per transaction and the I/O collect interval is 0.01,
		983	then you can't do more than 100 transactions per second).
		984
		985	Setting the I<timeout collect interval> can improve the opportunity for
		986	saving power, as the program will "bundle" timer callback invocations that
		987	are "near" in time together, by delaying some, thus reducing the number of
		988	times the process sleeps and wakes up again. Another useful technique to
		989	reduce iterations/wake-ups is to use C<ev_periodic> watchers and make sure
		990	they fire on, say, one-second boundaries only.
		991
		992	Example: we only need 0.1s timeout granularity, and we wish not to poll
		993	more often than 100 times per second:
		994
		995	ev_set_timeout_collect_interval (EV_DEFAULT_UC_ 0.1);
		996	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);
		997
		998	=item ev_invoke_pending (loop)
		999
		1000	This call will simply invoke all pending watchers while resetting their
		1001	pending state. Normally, C<ev_run> does this automatically when required,
		1002	but when overriding the invoke callback this call comes handy. This
		1003	function can be invoked from a watcher - this can be useful for example
		1004	when you want to do some lengthy calculation and want to pass further
		1005	event handling to another thread (you still have to make sure only one
		1006	thread executes within C<ev_invoke_pending> or C<ev_run> of course).
		1007
		1008	=item int ev_pending_count (loop)
		1009
		1010	Returns the number of pending watchers - zero indicates that no watchers
		1011	are pending.
		1012
		1013	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))
		1014
		1015	This overrides the invoke pending functionality of the loop: Instead of
		1016	invoking all pending watchers when there are any, C<ev_run> will call
		1017	this callback instead. This is useful, for example, when you want to
		1018	invoke the actual watchers inside another context (another thread etc.).
		1019
		1020	If you want to reset the callback, use C<ev_invoke_pending> as new
		1021	callback.
		1022
		1023	=item ev_set_loop_release_cb (loop, void (*release)(EV_P) throw (), void (*acquire)(EV_P) throw ())
		1024
		1025	Sometimes you want to share the same loop between multiple threads. This
		1026	can be done relatively simply by putting mutex_lock/unlock calls around
		1027	each call to a libev function.
		1028
		1029	However, C<ev_run> can run an indefinite time, so it is not feasible
		1030	to wait for it to return. One way around this is to wake up the event
		1031	loop via C<ev_break> and C<ev_async_send>, another way is to set these
		1032	I<release> and I<acquire> callbacks on the loop.
		1033
		1034	When set, then C<release> will be called just before the thread is
		1035	suspended waiting for new events, and C<acquire> is called just
		1036	afterwards.
		1037
		1038	Ideally, C<release> will just call your mutex_unlock function, and
		1039	C<acquire> will just call the mutex_lock function again.
		1040
		1041	While event loop modifications are allowed between invocations of
		1042	C<release> and C<acquire> (that's their only purpose after all), no
		1043	modifications done will affect the event loop, i.e. adding watchers will
		1044	have no effect on the set of file descriptors being watched, or the time
		1045	waited. Use an C<ev_async> watcher to wake up C<ev_run> when you want it
		1046	to take note of any changes you made.
		1047
		1048	In theory, threads executing C<ev_run> will be async-cancel safe between
		1049	invocations of C<release> and C<acquire>.
		1050
		1051	See also the locking example in the C<THREADS> section later in this
		1052	document.
		1053
		1054	=item ev_set_userdata (loop, void *data)
		1055
		1056	=item void *ev_userdata (loop)
		1057
		1058	Set and retrieve a single C<void *> associated with a loop. When
		1059	C<ev_set_userdata> has never been called, then C<ev_userdata> returns
		1060	C<0>.
		1061
		1062	These two functions can be used to associate arbitrary data with a loop,
		1063	and are intended solely for the C<invoke_pending_cb>, C<release> and
		1064	C<acquire> callbacks described above, but of course can be (ab-)used for
		1065	any other purpose as well.
		1066
		1067	=item ev_verify (loop)
		1068
		1069	This function only does something when C<EV_VERIFY> support has been
		1070	compiled in, which is the default for non-minimal builds. It tries to go
		1071	through all internal structures and checks them for validity. If anything
		1072	is found to be inconsistent, it will print an error message to standard
		1073	error and call C<abort ()>.
		1074
		1075	This can be used to catch bugs inside libev itself: under normal
		1076	circumstances, this function will never abort as of course libev keeps its
		1077	data structures consistent.
693		1078
694	=back	1079	=back
695		1080
696		1081
697	=head1 ANATOMY OF A WATCHER	1082	=head1 ANATOMY OF A WATCHER
698		1083
		1084	In the following description, uppercase C<TYPE> in names stands for the
		1085	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer
		1086	watchers and C<ev_io_start> for I/O watchers.
		1087
699	A watcher is a structure that you create and register to record your	1088	A watcher is an opaque structure that you allocate and register to record
700	interest in some event. For instance, if you want to wait for STDIN to	1089	your interest in some event. To make a concrete example, imagine you want
701	become readable, you would create an C<ev_io> watcher for that:	1090	to wait for STDIN to become readable, you would create an C<ev_io> watcher
		1091	for that:
702		1092
703	static void my_cb (struct ev_loop *loop, struct ev_io *w, int revents)	1093	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)
704	{	1094	{
705	ev_io_stop (w);	1095	ev_io_stop (w);
706	ev_unloop (loop, EVUNLOOP_ALL);	1096	ev_break (loop, EVBREAK_ALL);
707	}	1097	}
708		1098
709	struct ev_loop *loop = ev_default_loop (0);	1099	struct ev_loop *loop = ev_default_loop (0);
		1100
710	struct ev_io stdin_watcher;	1101	ev_io stdin_watcher;
		1102
711	ev_init (&stdin_watcher, my_cb);	1103	ev_init (&stdin_watcher, my_cb);
712	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);	1104	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
713	ev_io_start (loop, &stdin_watcher);	1105	ev_io_start (loop, &stdin_watcher);
		1106
714	ev_loop (loop, 0);	1107	ev_run (loop, 0);
715		1108
716	As you can see, you are responsible for allocating the memory for your	1109	As you can see, you are responsible for allocating the memory for your
717	watcher structures (and it is usually a bad idea to do this on the stack,	1110	watcher structures (and it is I<usually> a bad idea to do this on the
718	although this can sometimes be quite valid).	1111	stack).
719		1112
		1113	Each watcher has an associated watcher structure (called C<struct ev_TYPE>
		1114	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).
		1115
720	Each watcher structure must be initialised by a call to C<ev_init	1116	Each watcher structure must be initialised by a call to C<ev_init (watcher
721	(watcher *, callback)>, which expects a callback to be provided. This	1117	*, callback)>, which expects a callback to be provided. This callback is
722	callback gets invoked each time the event occurs (or, in the case of io	1118	invoked each time the event occurs (or, in the case of I/O watchers, each
723	watchers, each time the event loop detects that the file descriptor given	1119	time the event loop detects that the file descriptor given is readable
724	is readable and/or writable).	1120	and/or writable).
725		1121
726	Each watcher type has its own C<< ev_<type>_set (watcher *, ...) >> macro	1122	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>
727	with arguments specific to this watcher type. There is also a macro	1123	macro to configure it, with arguments specific to the watcher type. There
728	to combine initialisation and setting in one call: C<< ev_<type>_init	1124	is also a macro to combine initialisation and setting in one call: C<<
729	(watcher *, callback, ...) >>.	1125	ev_TYPE_init (watcher *, callback, ...) >>.
730		1126
731	To make the watcher actually watch out for events, you have to start it	1127	To make the watcher actually watch out for events, you have to start it
732	with a watcher-specific start function (C<< ev_<type>_start (loop, watcher	1128	with a watcher-specific start function (C<< ev_TYPE_start (loop, watcher
733	*) >>), and you can stop watching for events at any time by calling the	1129	*) >>), and you can stop watching for events at any time by calling the
734	corresponding stop function (C<< ev_<type>_stop (loop, watcher *) >>.	1130	corresponding stop function (C<< ev_TYPE_stop (loop, watcher *) >>.
735		1131
736	As long as your watcher is active (has been started but not stopped) you	1132	As long as your watcher is active (has been started but not stopped) you
737	must not touch the values stored in it. Most specifically you must never	1133	must not touch the values stored in it. Most specifically you must never
738	reinitialise it or call its C<set> macro.	1134	reinitialise it or call its C<ev_TYPE_set> macro.
739		1135
740	Each and every callback receives the event loop pointer as first, the	1136	Each and every callback receives the event loop pointer as first, the
741	registered watcher structure as second, and a bitset of received events as	1137	registered watcher structure as second, and a bitset of received events as
742	third argument.	1138	third argument.
743		1139
…		…
752	=item C<EV_WRITE>	1148	=item C<EV_WRITE>
753		1149
754	The file descriptor in the C<ev_io> watcher has become readable and/or	1150	The file descriptor in the C<ev_io> watcher has become readable and/or
755	writable.	1151	writable.
756		1152
757	=item C<EV_TIMEOUT>	1153	=item C<EV_TIMER>
758		1154
759	The C<ev_timer> watcher has timed out.	1155	The C<ev_timer> watcher has timed out.
760		1156
761	=item C<EV_PERIODIC>	1157	=item C<EV_PERIODIC>
762		1158
…		…
780		1176
781	=item C<EV_PREPARE>	1177	=item C<EV_PREPARE>
782		1178
783	=item C<EV_CHECK>	1179	=item C<EV_CHECK>
784		1180
785	All C<ev_prepare> watchers are invoked just I<before> C<ev_loop> starts	1181	All C<ev_prepare> watchers are invoked just I<before> C<ev_run> starts to
786	to gather new events, and all C<ev_check> watchers are invoked just after	1182	gather new events, and all C<ev_check> watchers are queued (not invoked)
787	C<ev_loop> has gathered them, but before it invokes any callbacks for any	1183	just after C<ev_run> has gathered them, but before it queues any callbacks
		1184	for any received events. That means C<ev_prepare> watchers are the last
		1185	watchers invoked before the event loop sleeps or polls for new events, and
		1186	C<ev_check> watchers will be invoked before any other watchers of the same
		1187	or lower priority within an event loop iteration.
		1188
788	received events. Callbacks of both watcher types can start and stop as	1189	Callbacks of both watcher types can start and stop as many watchers as
789	many watchers as they want, and all of them will be taken into account	1190	they want, and all of them will be taken into account (for example, a
790	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	1191	C<ev_prepare> watcher might start an idle watcher to keep C<ev_run> from
791	C<ev_loop> from blocking).	1192	blocking).
792		1193
793	=item C<EV_EMBED>	1194	=item C<EV_EMBED>
794		1195
795	The embedded event loop specified in the C<ev_embed> watcher needs attention.	1196	The embedded event loop specified in the C<ev_embed> watcher needs attention.
796		1197
797	=item C<EV_FORK>	1198	=item C<EV_FORK>
798		1199
799	The event loop has been resumed in the child process after fork (see	1200	The event loop has been resumed in the child process after fork (see
800	C<ev_fork>).	1201	C<ev_fork>).
801		1202
		1203	=item C<EV_CLEANUP>
		1204
		1205	The event loop is about to be destroyed (see C<ev_cleanup>).
		1206
802	=item C<EV_ASYNC>	1207	=item C<EV_ASYNC>
803		1208
804	The given async watcher has been asynchronously notified (see C<ev_async>).	1209	The given async watcher has been asynchronously notified (see C<ev_async>).
805		1210
		1211	=item C<EV_CUSTOM>
		1212
		1213	Not ever sent (or otherwise used) by libev itself, but can be freely used
		1214	by libev users to signal watchers (e.g. via C<ev_feed_event>).
		1215
806	=item C<EV_ERROR>	1216	=item C<EV_ERROR>
807		1217
808	An unspecified error has occured, the watcher has been stopped. This might	1218	An unspecified error has occurred, the watcher has been stopped. This might
809	happen because the watcher could not be properly started because libev	1219	happen because the watcher could not be properly started because libev
810	ran out of memory, a file descriptor was found to be closed or any other	1220	ran out of memory, a file descriptor was found to be closed or any other
		1221	problem. Libev considers these application bugs.
		1222
811	problem. You best act on it by reporting the problem and somehow coping	1223	You best act on it by reporting the problem and somehow coping with the
812	with the watcher being stopped.	1224	watcher being stopped. Note that well-written programs should not receive
		1225	an error ever, so when your watcher receives it, this usually indicates a
		1226	bug in your program.
813		1227
814	Libev will usually signal a few "dummy" events together with an error,	1228	Libev will usually signal a few "dummy" events together with an error, for
815	for example it might indicate that a fd is readable or writable, and if	1229	example it might indicate that a fd is readable or writable, and if your
816	your callbacks is well-written it can just attempt the operation and cope	1230	callbacks is well-written it can just attempt the operation and cope with
817	with the error from read() or write(). This will not work in multithreaded	1231	the error from read() or write(). This will not work in multi-threaded
818	programs, though, so beware.	1232	programs, though, as the fd could already be closed and reused for another
		1233	thing, so beware.
819		1234
820	=back	1235	=back
821		1236
822	=head2 GENERIC WATCHER FUNCTIONS	1237	=head2 GENERIC WATCHER FUNCTIONS
823
824	In the following description, C<TYPE> stands for the watcher type,
825	e.g. C<timer> for C<ev_timer> watchers and C<io> for C<ev_io> watchers.
826		1238
827	=over 4	1239	=over 4
828		1240
829	=item C<ev_init> (ev_TYPE *watcher, callback)	1241	=item C<ev_init> (ev_TYPE *watcher, callback)
830		1242
…		…
836	which rolls both calls into one.	1248	which rolls both calls into one.
837		1249
838	You can reinitialise a watcher at any time as long as it has been stopped	1250	You can reinitialise a watcher at any time as long as it has been stopped
839	(or never started) and there are no pending events outstanding.	1251	(or never started) and there are no pending events outstanding.
840		1252
841	The callback is always of type C<void (*)(ev_loop *loop, ev_TYPE *watcher,	1253	The callback is always of type C<void (*)(struct ev_loop *loop, ev_TYPE *watcher,
842	int revents)>.	1254	int revents)>.
843		1255
		1256	Example: Initialise an C<ev_io> watcher in two steps.
		1257
		1258	ev_io w;
		1259	ev_init (&w, my_cb);
		1260	ev_io_set (&w, STDIN_FILENO, EV_READ);
		1261
844	=item C<ev_TYPE_set> (ev_TYPE *, [args])	1262	=item C<ev_TYPE_set> (ev_TYPE *watcher, [args])
845		1263
846	This macro initialises the type-specific parts of a watcher. You need to	1264	This macro initialises the type-specific parts of a watcher. You need to
847	call C<ev_init> at least once before you call this macro, but you can	1265	call C<ev_init> at least once before you call this macro, but you can
848	call C<ev_TYPE_set> any number of times. You must not, however, call this	1266	call C<ev_TYPE_set> any number of times. You must not, however, call this
849	macro on a watcher that is active (it can be pending, however, which is a	1267	macro on a watcher that is active (it can be pending, however, which is a
850	difference to the C<ev_init> macro).	1268	difference to the C<ev_init> macro).
851		1269
852	Although some watcher types do not have type-specific arguments	1270	Although some watcher types do not have type-specific arguments
853	(e.g. C<ev_prepare>) you still need to call its C<set> macro.	1271	(e.g. C<ev_prepare>) you still need to call its C<set> macro.
854		1272
		1273	See C<ev_init>, above, for an example.
		1274
855	=item C<ev_TYPE_init> (ev_TYPE *watcher, callback, [args])	1275	=item C<ev_TYPE_init> (ev_TYPE *watcher, callback, [args])
856		1276
857	This convinience macro rolls both C<ev_init> and C<ev_TYPE_set> macro	1277	This convenience macro rolls both C<ev_init> and C<ev_TYPE_set> macro
858	calls into a single call. This is the most convinient method to initialise	1278	calls into a single call. This is the most convenient method to initialise
859	a watcher. The same limitations apply, of course.	1279	a watcher. The same limitations apply, of course.
860		1280
		1281	Example: Initialise and set an C<ev_io> watcher in one step.
		1282
		1283	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);
		1284
861	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)	1285	=item C<ev_TYPE_start> (loop, ev_TYPE *watcher)
862		1286
863	Starts (activates) the given watcher. Only active watchers will receive	1287	Starts (activates) the given watcher. Only active watchers will receive
864	events. If the watcher is already active nothing will happen.	1288	events. If the watcher is already active nothing will happen.
865		1289
		1290	Example: Start the C<ev_io> watcher that is being abused as example in this
		1291	whole section.
		1292
		1293	ev_io_start (EV_DEFAULT_UC, &w);
		1294
866	=item C<ev_TYPE_stop> (loop *, ev_TYPE *watcher)	1295	=item C<ev_TYPE_stop> (loop, ev_TYPE *watcher)
867		1296
868	Stops the given watcher again (if active) and clears the pending	1297	Stops the given watcher if active, and clears the pending status (whether
		1298	the watcher was active or not).
		1299
869	status. It is possible that stopped watchers are pending (for example,	1300	It is possible that stopped watchers are pending - for example,
870	non-repeating timers are being stopped when they become pending), but	1301	non-repeating timers are being stopped when they become pending - but
871	C<ev_TYPE_stop> ensures that the watcher is neither active nor pending. If	1302	calling C<ev_TYPE_stop> ensures that the watcher is neither active nor
872	you want to free or reuse the memory used by the watcher it is therefore a	1303	pending. If you want to free or reuse the memory used by the watcher it is
873	good idea to always call its C<ev_TYPE_stop> function.	1304	therefore a good idea to always call its C<ev_TYPE_stop> function.
874		1305
875	=item bool ev_is_active (ev_TYPE *watcher)	1306	=item bool ev_is_active (ev_TYPE *watcher)
876		1307
877	Returns a true value iff the watcher is active (i.e. it has been started	1308	Returns a true value iff the watcher is active (i.e. it has been started
878	and not yet been stopped). As long as a watcher is active you must not modify	1309	and not yet been stopped). As long as a watcher is active you must not modify
…		…
889		1320
890	=item callback ev_cb (ev_TYPE *watcher)	1321	=item callback ev_cb (ev_TYPE *watcher)
891		1322
892	Returns the callback currently set on the watcher.	1323	Returns the callback currently set on the watcher.
893		1324
894	=item ev_cb_set (ev_TYPE *watcher, callback)	1325	=item ev_set_cb (ev_TYPE *watcher, callback)
895		1326
896	Change the callback. You can change the callback at virtually any time	1327	Change the callback. You can change the callback at virtually any time
897	(modulo threads).	1328	(modulo threads).
898		1329
899	=item ev_set_priority (ev_TYPE *watcher, priority)	1330	=item ev_set_priority (ev_TYPE *watcher, int priority)
900		1331
901	=item int ev_priority (ev_TYPE *watcher)	1332	=item int ev_priority (ev_TYPE *watcher)
902		1333
903	Set and query the priority of the watcher. The priority is a small	1334	Set and query the priority of the watcher. The priority is a small
904	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>	1335	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
905	(default: C<-2>). Pending watchers with higher priority will be invoked	1336	(default: C<-2>). Pending watchers with higher priority will be invoked
906	before watchers with lower priority, but priority will not keep watchers	1337	before watchers with lower priority, but priority will not keep watchers
907	from being executed (except for C<ev_idle> watchers).	1338	from being executed (except for C<ev_idle> watchers).
908		1339
909	This means that priorities are I<only> used for ordering callback
910	invocation after new events have been received. This is useful, for
911	example, to reduce latency after idling, or more often, to bind two
912	watchers on the same event and make sure one is called first.
913
914	If you need to suppress invocation when higher priority events are pending	1340	If you need to suppress invocation when higher priority events are pending
915	you need to look at C<ev_idle> watchers, which provide this functionality.	1341	you need to look at C<ev_idle> watchers, which provide this functionality.
916		1342
917	You I<must not> change the priority of a watcher as long as it is active or	1343	You I<must not> change the priority of a watcher as long as it is active or
918	pending.	1344	pending.
919		1345
		1346	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is
		1347	fine, as long as you do not mind that the priority value you query might
		1348	or might not have been clamped to the valid range.
		1349
920	The default priority used by watchers when no priority has been set is	1350	The default priority used by watchers when no priority has been set is
921	always C<0>, which is supposed to not be too high and not be too low :).	1351	always C<0>, which is supposed to not be too high and not be too low :).
922		1352
923	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is	1353	See L</WATCHER PRIORITY MODELS>, below, for a more thorough treatment of
924	fine, as long as you do not mind that the priority value you query might	1354	priorities.
925	or might not have been adjusted to be within valid range.
926		1355
927	=item ev_invoke (loop, ev_TYPE *watcher, int revents)	1356	=item ev_invoke (loop, ev_TYPE *watcher, int revents)
928		1357
929	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither	1358	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
930	C<loop> nor C<revents> need to be valid as long as the watcher callback	1359	C<loop> nor C<revents> need to be valid as long as the watcher callback
931	can deal with that fact.	1360	can deal with that fact, as both are simply passed through to the
		1361	callback.
932		1362
933	=item int ev_clear_pending (loop, ev_TYPE *watcher)	1363	=item int ev_clear_pending (loop, ev_TYPE *watcher)
934		1364
935	If the watcher is pending, this function returns clears its pending status	1365	If the watcher is pending, this function clears its pending status and
936	and returns its C<revents> bitset (as if its callback was invoked). If the	1366	returns its C<revents> bitset (as if its callback was invoked). If the
937	watcher isn't pending it does nothing and returns C<0>.	1367	watcher isn't pending it does nothing and returns C<0>.
938		1368
		1369	Sometimes it can be useful to "poll" a watcher instead of waiting for its
		1370	callback to be invoked, which can be accomplished with this function.
		1371
		1372	=item ev_feed_event (loop, ev_TYPE *watcher, int revents)
		1373
		1374	Feeds the given event set into the event loop, as if the specified event
		1375	had happened for the specified watcher (which must be a pointer to an
		1376	initialised but not necessarily started event watcher). Obviously you must
		1377	not free the watcher as long as it has pending events.
		1378
		1379	Stopping the watcher, letting libev invoke it, or calling
		1380	C<ev_clear_pending> will clear the pending event, even if the watcher was
		1381	not started in the first place.
		1382
		1383	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
		1384	functions that do not need a watcher.
		1385
939	=back	1386	=back
940		1387
		1388	See also the L</ASSOCIATING CUSTOM DATA WITH A WATCHER> and L</BUILDING YOUR
		1389	OWN COMPOSITE WATCHERS> idioms.
941		1390
942	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	1391	=head2 WATCHER STATES
943		1392
944	Each watcher has, by default, a member C<void *data> that you can change	1393	There are various watcher states mentioned throughout this manual -
945	and read at any time, libev will completely ignore it. This can be used	1394	active, pending and so on. In this section these states and the rules to
946	to associate arbitrary data with your watcher. If you need more data and	1395	transition between them will be described in more detail - and while these
947	don't want to allocate memory and store a pointer to it in that data	1396	rules might look complicated, they usually do "the right thing".
948	member, you can also "subclass" the watcher type and provide your own
949	data:
950		1397
951	struct my_io	1398	=over 4
952	{
953	struct ev_io io;
954	int otherfd;
955	void *somedata;
956	struct whatever *mostinteresting;
957	}
958		1399
959	And since your callback will be called with a pointer to the watcher, you	1400	=item initialised
960	can cast it back to your own type:
961		1401
962	static void my_cb (struct ev_loop *loop, struct ev_io *w_, int revents)	1402	Before a watcher can be registered with the event loop it has to be
963	{	1403	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
964	struct my_io *w = (struct my_io *)w_;	1404	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
965	...
966	}
967		1405
968	More interesting and less C-conformant ways of casting your callback type	1406	In this state it is simply some block of memory that is suitable for
969	instead have been omitted.	1407	use in an event loop. It can be moved around, freed, reused etc. at
		1408	will - as long as you either keep the memory contents intact, or call
		1409	C<ev_TYPE_init> again.
970		1410
971	Another common scenario is having some data structure with multiple	1411	=item started/running/active
972	watchers:
973		1412
974	struct my_biggy	1413	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
975	{	1414	property of the event loop, and is actively waiting for events. While in
976	int some_data;	1415	this state it cannot be accessed (except in a few documented ways), moved,
977	ev_timer t1;	1416	freed or anything else - the only legal thing is to keep a pointer to it,
978	ev_timer t2;	1417	and call libev functions on it that are documented to work on active watchers.
979	}
980		1418
981	In this case getting the pointer to C<my_biggy> is a bit more complicated,	1419	=item pending
982	you need to use C<offsetof>:
983		1420
984	#include <stddef.h>	1421	If a watcher is active and libev determines that an event it is interested
		1422	in has occurred (such as a timer expiring), it will become pending. It will
		1423	stay in this pending state until either it is stopped or its callback is
		1424	about to be invoked, so it is not normally pending inside the watcher
		1425	callback.
985		1426
		1427	The watcher might or might not be active while it is pending (for example,
		1428	an expired non-repeating timer can be pending but no longer active). If it
		1429	is stopped, it can be freely accessed (e.g. by calling C<ev_TYPE_set>),
		1430	but it is still property of the event loop at this time, so cannot be
		1431	moved, freed or reused. And if it is active the rules described in the
		1432	previous item still apply.
		1433
		1434	It is also possible to feed an event on a watcher that is not active (e.g.
		1435	via C<ev_feed_event>), in which case it becomes pending without being
		1436	active.
		1437
		1438	=item stopped
		1439
		1440	A watcher can be stopped implicitly by libev (in which case it might still
		1441	be pending), or explicitly by calling its C<ev_TYPE_stop> function. The
		1442	latter will clear any pending state the watcher might be in, regardless
		1443	of whether it was active or not, so stopping a watcher explicitly before
		1444	freeing it is often a good idea.
		1445
		1446	While stopped (and not pending) the watcher is essentially in the
		1447	initialised state, that is, it can be reused, moved, modified in any way
		1448	you wish (but when you trash the memory block, you need to C<ev_TYPE_init>
		1449	it again).
		1450
		1451	=back
		1452
		1453	=head2 WATCHER PRIORITY MODELS
		1454
		1455	Many event loops support I<watcher priorities>, which are usually small
		1456	integers that influence the ordering of event callback invocation
		1457	between watchers in some way, all else being equal.
		1458
		1459	In libev, Watcher priorities can be set using C<ev_set_priority>. See its
		1460	description for the more technical details such as the actual priority
		1461	range.
		1462
		1463	There are two common ways how these these priorities are being interpreted
		1464	by event loops:
		1465
		1466	In the more common lock-out model, higher priorities "lock out" invocation
		1467	of lower priority watchers, which means as long as higher priority
		1468	watchers receive events, lower priority watchers are not being invoked.
		1469
		1470	The less common only-for-ordering model uses priorities solely to order
		1471	callback invocation within a single event loop iteration: Higher priority
		1472	watchers are invoked before lower priority ones, but they all get invoked
		1473	before polling for new events.
		1474
		1475	Libev uses the second (only-for-ordering) model for all its watchers
		1476	except for idle watchers (which use the lock-out model).
		1477
		1478	The rationale behind this is that implementing the lock-out model for
		1479	watchers is not well supported by most kernel interfaces, and most event
		1480	libraries will just poll for the same events again and again as long as
		1481	their callbacks have not been executed, which is very inefficient in the
		1482	common case of one high-priority watcher locking out a mass of lower
		1483	priority ones.
		1484
		1485	Static (ordering) priorities are most useful when you have two or more
		1486	watchers handling the same resource: a typical usage example is having an
		1487	C<ev_io> watcher to receive data, and an associated C<ev_timer> to handle
		1488	timeouts. Under load, data might be received while the program handles
		1489	other jobs, but since timers normally get invoked first, the timeout
		1490	handler will be executed before checking for data. In that case, giving
		1491	the timer a lower priority than the I/O watcher ensures that I/O will be
		1492	handled first even under adverse conditions (which is usually, but not
		1493	always, what you want).
		1494
		1495	Since idle watchers use the "lock-out" model, meaning that idle watchers
		1496	will only be executed when no same or higher priority watchers have
		1497	received events, they can be used to implement the "lock-out" model when
		1498	required.
		1499
		1500	For example, to emulate how many other event libraries handle priorities,
		1501	you can associate an C<ev_idle> watcher to each such watcher, and in
		1502	the normal watcher callback, you just start the idle watcher. The real
		1503	processing is done in the idle watcher callback. This causes libev to
		1504	continuously poll and process kernel event data for the watcher, but when
		1505	the lock-out case is known to be rare (which in turn is rare :), this is
		1506	workable.
		1507
		1508	Usually, however, the lock-out model implemented that way will perform
		1509	miserably under the type of load it was designed to handle. In that case,
		1510	it might be preferable to stop the real watcher before starting the
		1511	idle watcher, so the kernel will not have to process the event in case
		1512	the actual processing will be delayed for considerable time.
		1513
		1514	Here is an example of an I/O watcher that should run at a strictly lower
		1515	priority than the default, and which should only process data when no
		1516	other events are pending:
		1517
		1518	ev_idle idle; // actual processing watcher
		1519	ev_io io; // actual event watcher
		1520
986	static void	1521	static void
987	t1_cb (EV_P_ struct ev_timer *w, int revents)	1522	io_cb (EV_P_ ev_io *w, int revents)
988	{	1523	{
989	struct my_biggy big = (struct my_biggy *	1524	// stop the I/O watcher, we received the event, but
990	(((char *)w) - offsetof (struct my_biggy, t1));	1525	// are not yet ready to handle it.
		1526	ev_io_stop (EV_A_ w);
		1527
		1528	// start the idle watcher to handle the actual event.
		1529	// it will not be executed as long as other watchers
		1530	// with the default priority are receiving events.
		1531	ev_idle_start (EV_A_ &idle);
991	}	1532	}
992		1533
993	static void	1534	static void
994	t2_cb (EV_P_ struct ev_timer *w, int revents)	1535	idle_cb (EV_P_ ev_idle *w, int revents)
995	{	1536	{
996	struct my_biggy big = (struct my_biggy *	1537	// actual processing
997	(((char *)w) - offsetof (struct my_biggy, t2));	1538	read (STDIN_FILENO, ...);
		1539
		1540	// have to start the I/O watcher again, as
		1541	// we have handled the event
		1542	ev_io_start (EV_P_ &io);
998	}	1543	}
		1544
		1545	// initialisation
		1546	ev_idle_init (&idle, idle_cb);
		1547	ev_io_init (&io, io_cb, STDIN_FILENO, EV_READ);
		1548	ev_io_start (EV_DEFAULT_ &io);
		1549
		1550	In the "real" world, it might also be beneficial to start a timer, so that
		1551	low-priority connections can not be locked out forever under load. This
		1552	enables your program to keep a lower latency for important connections
		1553	during short periods of high load, while not completely locking out less
		1554	important ones.
999		1555
1000		1556
1001	=head1 WATCHER TYPES	1557	=head1 WATCHER TYPES
1002		1558
1003	This section describes each watcher in detail, but will not repeat	1559	This section describes each watcher in detail, but will not repeat
…		…
1027	In general you can register as many read and/or write event watchers per	1583	In general you can register as many read and/or write event watchers per
1028	fd as you want (as long as you don't confuse yourself). Setting all file	1584	fd as you want (as long as you don't confuse yourself). Setting all file
1029	descriptors to non-blocking mode is also usually a good idea (but not	1585	descriptors to non-blocking mode is also usually a good idea (but not
1030	required if you know what you are doing).	1586	required if you know what you are doing).
1031		1587
1032	If you must do this, then force the use of a known-to-be-good backend
1033	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and
1034	C<EVBACKEND_POLL>).
1035
1036	Another thing you have to watch out for is that it is quite easy to	1588	Another thing you have to watch out for is that it is quite easy to
1037	receive "spurious" readyness notifications, that is your callback might	1589	receive "spurious" readiness notifications, that is, your callback might
1038	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1590	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
1039	because there is no data. Not only are some backends known to create a	1591	because there is no data. It is very easy to get into this situation even
1040	lot of those (for example solaris ports), it is very easy to get into	1592	with a relatively standard program structure. Thus it is best to always
1041	this situation even with a relatively standard program structure. Thus	1593	use non-blocking I/O: An extra C<read>(2) returning C<EAGAIN> is far
1042	it is best to always use non-blocking I/O: An extra C<read>(2) returning
1043	C<EAGAIN> is far preferable to a program hanging until some data arrives.	1594	preferable to a program hanging until some data arrives.
1044		1595
1045	If you cannot run the fd in non-blocking mode (for example you should not	1596	If you cannot run the fd in non-blocking mode (for example you should
1046	play around with an Xlib connection), then you have to seperately re-test	1597	not play around with an Xlib connection), then you have to separately
1047	whether a file descriptor is really ready with a known-to-be good interface	1598	re-test whether a file descriptor is really ready with a known-to-be good
1048	such as poll (fortunately in our Xlib example, Xlib already does this on	1599	interface such as poll (fortunately in the case of Xlib, it already does
1049	its own, so its quite safe to use).	1600	this on its own, so its quite safe to use). Some people additionally
		1601	use C<SIGALRM> and an interval timer, just to be sure you won't block
		1602	indefinitely.
		1603
		1604	But really, best use non-blocking mode.
1050		1605
1051	=head3 The special problem of disappearing file descriptors	1606	=head3 The special problem of disappearing file descriptors
1052		1607
1053	Some backends (e.g. kqueue, epoll) need to be told about closing a file	1608	Some backends (e.g. kqueue, epoll) need to be told about closing a file
1054	descriptor (either by calling C<close> explicitly or by any other means,	1609	descriptor (either due to calling C<close> explicitly or any other means,
1055	such as C<dup>). The reason is that you register interest in some file	1610	such as C<dup2>). The reason is that you register interest in some file
1056	descriptor, but when it goes away, the operating system will silently drop	1611	descriptor, but when it goes away, the operating system will silently drop
1057	this interest. If another file descriptor with the same number then is	1612	this interest. If another file descriptor with the same number then is
1058	registered with libev, there is no efficient way to see that this is, in	1613	registered with libev, there is no efficient way to see that this is, in
1059	fact, a different file descriptor.	1614	fact, a different file descriptor.
1060		1615
…		…
1078		1633
1079	There is no workaround possible except not registering events	1634	There is no workaround possible except not registering events
1080	for potentially C<dup ()>'ed file descriptors, or to resort to	1635	for potentially C<dup ()>'ed file descriptors, or to resort to
1081	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.	1636	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1082		1637
		1638	=head3 The special problem of files
		1639
		1640	Many people try to use C<select> (or libev) on file descriptors
		1641	representing files, and expect it to become ready when their program
		1642	doesn't block on disk accesses (which can take a long time on their own).
		1643
		1644	However, this cannot ever work in the "expected" way - you get a readiness
		1645	notification as soon as the kernel knows whether and how much data is
		1646	there, and in the case of open files, that's always the case, so you
		1647	always get a readiness notification instantly, and your read (or possibly
		1648	write) will still block on the disk I/O.
		1649
		1650	Another way to view it is that in the case of sockets, pipes, character
		1651	devices and so on, there is another party (the sender) that delivers data
		1652	on its own, but in the case of files, there is no such thing: the disk
		1653	will not send data on its own, simply because it doesn't know what you
		1654	wish to read - you would first have to request some data.
		1655
		1656	Since files are typically not-so-well supported by advanced notification
		1657	mechanism, libev tries hard to emulate POSIX behaviour with respect
		1658	to files, even though you should not use it. The reason for this is
		1659	convenience: sometimes you want to watch STDIN or STDOUT, which is
		1660	usually a tty, often a pipe, but also sometimes files or special devices
		1661	(for example, C<epoll> on Linux works with F</dev/random> but not with
		1662	F</dev/urandom>), and even though the file might better be served with
		1663	asynchronous I/O instead of with non-blocking I/O, it is still useful when
		1664	it "just works" instead of freezing.
		1665
		1666	So avoid file descriptors pointing to files when you know it (e.g. use
		1667	libeio), but use them when it is convenient, e.g. for STDIN/STDOUT, or
		1668	when you rarely read from a file instead of from a socket, and want to
		1669	reuse the same code path.
		1670
1083	=head3 The special problem of fork	1671	=head3 The special problem of fork
1084		1672
1085	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit	1673	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit
1086	useless behaviour. Libev fully supports fork, but needs to be told about	1674	useless behaviour. Libev fully supports fork, but needs to be told about
1087	it in the child.	1675	it in the child if you want to continue to use it in the child.
1088		1676
1089	To support fork in your programs, you either have to call	1677	To support fork in your child processes, you have to call C<ev_loop_fork
1090	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,	1678	()> after a fork in the child, enable C<EVFLAG_FORKCHECK>, or resort to
1091	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or	1679	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1092	C<EVBACKEND_POLL>.
1093		1680
1094	=head3 The special problem of SIGPIPE	1681	=head3 The special problem of SIGPIPE
1095		1682
1096	While not really specific to libev, it is easy to forget about SIGPIPE:	1683	While not really specific to libev, it is easy to forget about C<SIGPIPE>:
1097	when reading from a pipe whose other end has been closed, your program	1684	when writing to a pipe whose other end has been closed, your program gets
1098	gets send a SIGPIPE, which, by default, aborts your program. For most	1685	sent a SIGPIPE, which, by default, aborts your program. For most programs
1099	programs this is sensible behaviour, for daemons, this is usually	1686	this is sensible behaviour, for daemons, this is usually undesirable.
1100	undesirable.
1101		1687
1102	So when you encounter spurious, unexplained daemon exits, make sure you	1688	So when you encounter spurious, unexplained daemon exits, make sure you
1103	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon	1689	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
1104	somewhere, as that would have given you a big clue).	1690	somewhere, as that would have given you a big clue).
1105		1691
		1692	=head3 The special problem of accept()ing when you can't
		1693
		1694	Many implementations of the POSIX C<accept> function (for example,
		1695	found in post-2004 Linux) have the peculiar behaviour of not removing a
		1696	connection from the pending queue in all error cases.
		1697
		1698	For example, larger servers often run out of file descriptors (because
		1699	of resource limits), causing C<accept> to fail with C<ENFILE> but not
		1700	rejecting the connection, leading to libev signalling readiness on
		1701	the next iteration again (the connection still exists after all), and
		1702	typically causing the program to loop at 100% CPU usage.
		1703
		1704	Unfortunately, the set of errors that cause this issue differs between
		1705	operating systems, there is usually little the app can do to remedy the
		1706	situation, and no known thread-safe method of removing the connection to
		1707	cope with overload is known (to me).
		1708
		1709	One of the easiest ways to handle this situation is to just ignore it
		1710	- when the program encounters an overload, it will just loop until the
		1711	situation is over. While this is a form of busy waiting, no OS offers an
		1712	event-based way to handle this situation, so it's the best one can do.
		1713
		1714	A better way to handle the situation is to log any errors other than
		1715	C<EAGAIN> and C<EWOULDBLOCK>, making sure not to flood the log with such
		1716	messages, and continue as usual, which at least gives the user an idea of
		1717	what could be wrong ("raise the ulimit!"). For extra points one could stop
		1718	the C<ev_io> watcher on the listening fd "for a while", which reduces CPU
		1719	usage.
		1720
		1721	If your program is single-threaded, then you could also keep a dummy file
		1722	descriptor for overload situations (e.g. by opening F</dev/null>), and
		1723	when you run into C<ENFILE> or C<EMFILE>, close it, run C<accept>,
		1724	close that fd, and create a new dummy fd. This will gracefully refuse
		1725	clients under typical overload conditions.
		1726
		1727	The last way to handle it is to simply log the error and C<exit>, as
		1728	is often done with C<malloc> failures, but this results in an easy
		1729	opportunity for a DoS attack.
1106		1730
1107	=head3 Watcher-Specific Functions	1731	=head3 Watcher-Specific Functions
1108		1732
1109	=over 4	1733	=over 4
1110		1734
1111	=item ev_io_init (ev_io *, callback, int fd, int events)	1735	=item ev_io_init (ev_io *, callback, int fd, int events)
1112		1736
1113	=item ev_io_set (ev_io *, int fd, int events)	1737	=item ev_io_set (ev_io *, int fd, int events)
1114		1738
1115	Configures an C<ev_io> watcher. The C<fd> is the file descriptor to	1739	Configures an C<ev_io> watcher. The C<fd> is the file descriptor to
1116	rceeive events for and events is either C<EV_READ>, C<EV_WRITE> or	1740	receive events for and C<events> is either C<EV_READ>, C<EV_WRITE> or
1117	C<EV_READ | EV_WRITE> to receive the given events.	1741	C<EV_READ | EV_WRITE>, to express the desire to receive the given events.
1118		1742
1119	=item int fd [read-only]	1743	=item int fd [read-only]
1120		1744
1121	The file descriptor being watched.	1745	The file descriptor being watched.
1122		1746
…		…
1130		1754
1131	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well	1755	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well
1132	readable, but only once. Since it is likely line-buffered, you could	1756	readable, but only once. Since it is likely line-buffered, you could
1133	attempt to read a whole line in the callback.	1757	attempt to read a whole line in the callback.
1134		1758
1135	static void	1759	static void
1136	stdin_readable_cb (struct ev_loop *loop, struct ev_io *w, int revents)	1760	stdin_readable_cb (struct ev_loop *loop, ev_io *w, int revents)
1137	{	1761	{
1138	ev_io_stop (loop, w);	1762	ev_io_stop (loop, w);
1139	.. read from stdin here (or from w->fd) and haqndle any I/O errors	1763	.. read from stdin here (or from w->fd) and handle any I/O errors
1140	}	1764	}
1141		1765
1142	...	1766	...
1143	struct ev_loop *loop = ev_default_init (0);	1767	struct ev_loop *loop = ev_default_init (0);
1144	struct ev_io stdin_readable;	1768	ev_io stdin_readable;
1145	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);	1769	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
1146	ev_io_start (loop, &stdin_readable);	1770	ev_io_start (loop, &stdin_readable);
1147	ev_loop (loop, 0);	1771	ev_run (loop, 0);
1148		1772
1149		1773
1150	=head2 C<ev_timer> - relative and optionally repeating timeouts	1774	=head2 C<ev_timer> - relative and optionally repeating timeouts
1151		1775
1152	Timer watchers are simple relative timers that generate an event after a	1776	Timer watchers are simple relative timers that generate an event after a
1153	given time, and optionally repeating in regular intervals after that.	1777	given time, and optionally repeating in regular intervals after that.
1154		1778
1155	The timers are based on real time, that is, if you register an event that	1779	The timers are based on real time, that is, if you register an event that
1156	times out after an hour and you reset your system clock to last years	1780	times out after an hour and you reset your system clock to January last
1157	time, it will still time out after (roughly) and hour. "Roughly" because	1781	year, it will still time out after (roughly) one hour. "Roughly" because
1158	detecting time jumps is hard, and some inaccuracies are unavoidable (the	1782	detecting time jumps is hard, and some inaccuracies are unavoidable (the
1159	monotonic clock option helps a lot here).	1783	monotonic clock option helps a lot here).
		1784
		1785	The callback is guaranteed to be invoked only I<after> its timeout has
		1786	passed (not I<at>, so on systems with very low-resolution clocks this
		1787	might introduce a small delay, see "the special problem of being too
		1788	early", below). If multiple timers become ready during the same loop
		1789	iteration then the ones with earlier time-out values are invoked before
		1790	ones of the same priority with later time-out values (but this is no
		1791	longer true when a callback calls C<ev_run> recursively).
		1792
		1793	=head3 Be smart about timeouts
		1794
		1795	Many real-world problems involve some kind of timeout, usually for error
		1796	recovery. A typical example is an HTTP request - if the other side hangs,
		1797	you want to raise some error after a while.
		1798
		1799	What follows are some ways to handle this problem, from obvious and
		1800	inefficient to smart and efficient.
		1801
		1802	In the following, a 60 second activity timeout is assumed - a timeout that
		1803	gets reset to 60 seconds each time there is activity (e.g. each time some
		1804	data or other life sign was received).
		1805
		1806	=over 4
		1807
		1808	=item 1. Use a timer and stop, reinitialise and start it on activity.
		1809
		1810	This is the most obvious, but not the most simple way: In the beginning,
		1811	start the watcher:
		1812
		1813	ev_timer_init (timer, callback, 60., 0.);
		1814	ev_timer_start (loop, timer);
		1815
		1816	Then, each time there is some activity, C<ev_timer_stop> it, initialise it
		1817	and start it again:
		1818
		1819	ev_timer_stop (loop, timer);
		1820	ev_timer_set (timer, 60., 0.);
		1821	ev_timer_start (loop, timer);
		1822
		1823	This is relatively simple to implement, but means that each time there is
		1824	some activity, libev will first have to remove the timer from its internal
		1825	data structure and then add it again. Libev tries to be fast, but it's
		1826	still not a constant-time operation.
		1827
		1828	=item 2. Use a timer and re-start it with C<ev_timer_again> inactivity.
		1829
		1830	This is the easiest way, and involves using C<ev_timer_again> instead of
		1831	C<ev_timer_start>.
		1832
		1833	To implement this, configure an C<ev_timer> with a C<repeat> value
		1834	of C<60> and then call C<ev_timer_again> at start and each time you
		1835	successfully read or write some data. If you go into an idle state where
		1836	you do not expect data to travel on the socket, you can C<ev_timer_stop>
		1837	the timer, and C<ev_timer_again> will automatically restart it if need be.
		1838
		1839	That means you can ignore both the C<ev_timer_start> function and the
		1840	C<after> argument to C<ev_timer_set>, and only ever use the C<repeat>
		1841	member and C<ev_timer_again>.
		1842
		1843	At start:
		1844
		1845	ev_init (timer, callback);
		1846	timer->repeat = 60.;
		1847	ev_timer_again (loop, timer);
		1848
		1849	Each time there is some activity:
		1850
		1851	ev_timer_again (loop, timer);
		1852
		1853	It is even possible to change the time-out on the fly, regardless of
		1854	whether the watcher is active or not:
		1855
		1856	timer->repeat = 30.;
		1857	ev_timer_again (loop, timer);
		1858
		1859	This is slightly more efficient then stopping/starting the timer each time
		1860	you want to modify its timeout value, as libev does not have to completely
		1861	remove and re-insert the timer from/into its internal data structure.
		1862
		1863	It is, however, even simpler than the "obvious" way to do it.
		1864
		1865	=item 3. Let the timer time out, but then re-arm it as required.
		1866
		1867	This method is more tricky, but usually most efficient: Most timeouts are
		1868	relatively long compared to the intervals between other activity - in
		1869	our example, within 60 seconds, there are usually many I/O events with
		1870	associated activity resets.
		1871
		1872	In this case, it would be more efficient to leave the C<ev_timer> alone,
		1873	but remember the time of last activity, and check for a real timeout only
		1874	within the callback:
		1875
		1876	ev_tstamp timeout = 60.;
		1877	ev_tstamp last_activity; // time of last activity
		1878	ev_timer timer;
		1879
		1880	static void
		1881	callback (EV_P_ ev_timer *w, int revents)
		1882	{
		1883	// calculate when the timeout would happen
		1884	ev_tstamp after = last_activity - ev_now (EV_A) + timeout;
		1885
		1886	// if negative, it means we the timeout already occurred
		1887	if (after < 0.)
		1888	{
		1889	// timeout occurred, take action
		1890	}
		1891	else
		1892	{
		1893	// callback was invoked, but there was some recent
		1894	// activity. simply restart the timer to time out
		1895	// after "after" seconds, which is the earliest time
		1896	// the timeout can occur.
		1897	ev_timer_set (w, after, 0.);
		1898	ev_timer_start (EV_A_ w);
		1899	}
		1900	}
		1901
		1902	To summarise the callback: first calculate in how many seconds the
		1903	timeout will occur (by calculating the absolute time when it would occur,
		1904	C<last_activity + timeout>, and subtracting the current time, C<ev_now
		1905	(EV_A)> from that).
		1906
		1907	If this value is negative, then we are already past the timeout, i.e. we
		1908	timed out, and need to do whatever is needed in this case.
		1909
		1910	Otherwise, we now the earliest time at which the timeout would trigger,
		1911	and simply start the timer with this timeout value.
		1912
		1913	In other words, each time the callback is invoked it will check whether
		1914	the timeout occurred. If not, it will simply reschedule itself to check
		1915	again at the earliest time it could time out. Rinse. Repeat.
		1916
		1917	This scheme causes more callback invocations (about one every 60 seconds
		1918	minus half the average time between activity), but virtually no calls to
		1919	libev to change the timeout.
		1920
		1921	To start the machinery, simply initialise the watcher and set
		1922	C<last_activity> to the current time (meaning there was some activity just
		1923	now), then call the callback, which will "do the right thing" and start
		1924	the timer:
		1925
		1926	last_activity = ev_now (EV_A);
		1927	ev_init (&timer, callback);
		1928	callback (EV_A_ &timer, 0);
		1929
		1930	When there is some activity, simply store the current time in
		1931	C<last_activity>, no libev calls at all:
		1932
		1933	if (activity detected)
		1934	last_activity = ev_now (EV_A);
		1935
		1936	When your timeout value changes, then the timeout can be changed by simply
		1937	providing a new value, stopping the timer and calling the callback, which
		1938	will again do the right thing (for example, time out immediately :).
		1939
		1940	timeout = new_value;
		1941	ev_timer_stop (EV_A_ &timer);
		1942	callback (EV_A_ &timer, 0);
		1943
		1944	This technique is slightly more complex, but in most cases where the
		1945	time-out is unlikely to be triggered, much more efficient.
		1946
		1947	=item 4. Wee, just use a double-linked list for your timeouts.
		1948
		1949	If there is not one request, but many thousands (millions...), all
		1950	employing some kind of timeout with the same timeout value, then one can
		1951	do even better:
		1952
		1953	When starting the timeout, calculate the timeout value and put the timeout
		1954	at the I<end> of the list.
		1955
		1956	Then use an C<ev_timer> to fire when the timeout at the I<beginning> of
		1957	the list is expected to fire (for example, using the technique #3).
		1958
		1959	When there is some activity, remove the timer from the list, recalculate
		1960	the timeout, append it to the end of the list again, and make sure to
		1961	update the C<ev_timer> if it was taken from the beginning of the list.
		1962
		1963	This way, one can manage an unlimited number of timeouts in O(1) time for
		1964	starting, stopping and updating the timers, at the expense of a major
		1965	complication, and having to use a constant timeout. The constant timeout
		1966	ensures that the list stays sorted.
		1967
		1968	=back
		1969
		1970	So which method the best?
		1971
		1972	Method #2 is a simple no-brain-required solution that is adequate in most
		1973	situations. Method #3 requires a bit more thinking, but handles many cases
		1974	better, and isn't very complicated either. In most case, choosing either
		1975	one is fine, with #3 being better in typical situations.
		1976
		1977	Method #1 is almost always a bad idea, and buys you nothing. Method #4 is
		1978	rather complicated, but extremely efficient, something that really pays
		1979	off after the first million or so of active timers, i.e. it's usually
		1980	overkill :)
		1981
		1982	=head3 The special problem of being too early
		1983
		1984	If you ask a timer to call your callback after three seconds, then
		1985	you expect it to be invoked after three seconds - but of course, this
		1986	cannot be guaranteed to infinite precision. Less obviously, it cannot be
		1987	guaranteed to any precision by libev - imagine somebody suspending the
		1988	process with a STOP signal for a few hours for example.
		1989
		1990	So, libev tries to invoke your callback as soon as possible I<after> the
		1991	delay has occurred, but cannot guarantee this.
		1992
		1993	A less obvious failure mode is calling your callback too early: many event
		1994	loops compare timestamps with a "elapsed delay >= requested delay", but
		1995	this can cause your callback to be invoked much earlier than you would
		1996	expect.
		1997
		1998	To see why, imagine a system with a clock that only offers full second
		1999	resolution (think windows if you can't come up with a broken enough OS
		2000	yourself). If you schedule a one-second timer at the time 500.9, then the
		2001	event loop will schedule your timeout to elapse at a system time of 500
		2002	(500.9 truncated to the resolution) + 1, or 501.
		2003
		2004	If an event library looks at the timeout 0.1s later, it will see "501 >=
		2005	501" and invoke the callback 0.1s after it was started, even though a
		2006	one-second delay was requested - this is being "too early", despite best
		2007	intentions.
		2008
		2009	This is the reason why libev will never invoke the callback if the elapsed
		2010	delay equals the requested delay, but only when the elapsed delay is
		2011	larger than the requested delay. In the example above, libev would only invoke
		2012	the callback at system time 502, or 1.1s after the timer was started.
		2013
		2014	So, while libev cannot guarantee that your callback will be invoked
		2015	exactly when requested, it I<can> and I<does> guarantee that the requested
		2016	delay has actually elapsed, or in other words, it always errs on the "too
		2017	late" side of things.
		2018
		2019	=head3 The special problem of time updates
		2020
		2021	Establishing the current time is a costly operation (it usually takes
		2022	at least one system call): EV therefore updates its idea of the current
		2023	time only before and after C<ev_run> collects new events, which causes a
		2024	growing difference between C<ev_now ()> and C<ev_time ()> when handling
		2025	lots of events in one iteration.
1160		2026
1161	The relative timeouts are calculated relative to the C<ev_now ()>	2027	The relative timeouts are calculated relative to the C<ev_now ()>
1162	time. This is usually the right thing as this timestamp refers to the time	2028	time. This is usually the right thing as this timestamp refers to the time
1163	of the event triggering whatever timeout you are modifying/starting. If	2029	of the event triggering whatever timeout you are modifying/starting. If
1164	you suspect event processing to be delayed and you I<need> to base the timeout	2030	you suspect event processing to be delayed and you I<need> to base the
1165	on the current time, use something like this to adjust for this:	2031	timeout on the current time, use something like this to adjust for this:
1166		2032
1167	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);	2033	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);
1168		2034
1169	The callback is guarenteed to be invoked only when its timeout has passed,	2035	If the event loop is suspended for a long time, you can also force an
1170	but if multiple timers become ready during the same loop iteration then	2036	update of the time returned by C<ev_now ()> by calling C<ev_now_update
1171	order of execution is undefined.	2037	()>.
		2038
		2039	=head3 The special problem of unsynchronised clocks
		2040
		2041	Modern systems have a variety of clocks - libev itself uses the normal
		2042	"wall clock" clock and, if available, the monotonic clock (to avoid time
		2043	jumps).
		2044
		2045	Neither of these clocks is synchronised with each other or any other clock
		2046	on the system, so C<ev_time ()> might return a considerably different time
		2047	than C<gettimeofday ()> or C<time ()>. On a GNU/Linux system, for example,
		2048	a call to C<gettimeofday> might return a second count that is one higher
		2049	than a directly following call to C<time>.
		2050
		2051	The moral of this is to only compare libev-related timestamps with
		2052	C<ev_time ()> and C<ev_now ()>, at least if you want better precision than
		2053	a second or so.
		2054
		2055	One more problem arises due to this lack of synchronisation: if libev uses
		2056	the system monotonic clock and you compare timestamps from C<ev_time>
		2057	or C<ev_now> from when you started your timer and when your callback is
		2058	invoked, you will find that sometimes the callback is a bit "early".
		2059
		2060	This is because C<ev_timer>s work in real time, not wall clock time, so
		2061	libev makes sure your callback is not invoked before the delay happened,
		2062	I<measured according to the real time>, not the system clock.
		2063
		2064	If your timeouts are based on a physical timescale (e.g. "time out this
		2065	connection after 100 seconds") then this shouldn't bother you as it is
		2066	exactly the right behaviour.
		2067
		2068	If you want to compare wall clock/system timestamps to your timers, then
		2069	you need to use C<ev_periodic>s, as these are based on the wall clock
		2070	time, where your comparisons will always generate correct results.
		2071
		2072	=head3 The special problems of suspended animation
		2073
		2074	When you leave the server world it is quite customary to hit machines that
		2075	can suspend/hibernate - what happens to the clocks during such a suspend?
		2076
		2077	Some quick tests made with a Linux 2.6.28 indicate that a suspend freezes
		2078	all processes, while the clocks (C<times>, C<CLOCK_MONOTONIC>) continue
		2079	to run until the system is suspended, but they will not advance while the
		2080	system is suspended. That means, on resume, it will be as if the program
		2081	was frozen for a few seconds, but the suspend time will not be counted
		2082	towards C<ev_timer> when a monotonic clock source is used. The real time
		2083	clock advanced as expected, but if it is used as sole clocksource, then a
		2084	long suspend would be detected as a time jump by libev, and timers would
		2085	be adjusted accordingly.
		2086
		2087	I would not be surprised to see different behaviour in different between
		2088	operating systems, OS versions or even different hardware.
		2089
		2090	The other form of suspend (job control, or sending a SIGSTOP) will see a
		2091	time jump in the monotonic clocks and the realtime clock. If the program
		2092	is suspended for a very long time, and monotonic clock sources are in use,
		2093	then you can expect C<ev_timer>s to expire as the full suspension time
		2094	will be counted towards the timers. When no monotonic clock source is in
		2095	use, then libev will again assume a timejump and adjust accordingly.
		2096
		2097	It might be beneficial for this latter case to call C<ev_suspend>
		2098	and C<ev_resume> in code that handles C<SIGTSTP>, to at least get
		2099	deterministic behaviour in this case (you can do nothing against
		2100	C<SIGSTOP>).
1172		2101
1173	=head3 Watcher-Specific Functions and Data Members	2102	=head3 Watcher-Specific Functions and Data Members
1174		2103
1175	=over 4	2104	=over 4
1176		2105
1177	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	2106	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
1178		2107
1179	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)	2108	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)
1180		2109
1181	Configure the timer to trigger after C<after> seconds. If C<repeat> is	2110	Configure the timer to trigger after C<after> seconds. If C<repeat>
1182	C<0.>, then it will automatically be stopped. If it is positive, then the	2111	is C<0.>, then it will automatically be stopped once the timeout is
1183	timer will automatically be configured to trigger again C<repeat> seconds	2112	reached. If it is positive, then the timer will automatically be
1184	later, again, and again, until stopped manually.	2113	configured to trigger again C<repeat> seconds later, again, and again,
		2114	until stopped manually.
1185		2115
1186	The timer itself will do a best-effort at avoiding drift, that is, if you	2116	The timer itself will do a best-effort at avoiding drift, that is, if
1187	configure a timer to trigger every 10 seconds, then it will trigger at	2117	you configure a timer to trigger every 10 seconds, then it will normally
1188	exactly 10 second intervals. If, however, your program cannot keep up with	2118	trigger at exactly 10 second intervals. If, however, your program cannot
1189	the timer (because it takes longer than those 10 seconds to do stuff) the	2119	keep up with the timer (because it takes longer than those 10 seconds to
1190	timer will not fire more than once per event loop iteration.	2120	do stuff) the timer will not fire more than once per event loop iteration.
1191		2121
1192	=item ev_timer_again (loop, ev_timer *)	2122	=item ev_timer_again (loop, ev_timer *)
1193		2123
1194	This will act as if the timer timed out and restart it again if it is	2124	This will act as if the timer timed out, and restarts it again if it is
1195	repeating. The exact semantics are:	2125	repeating. It basically works like calling C<ev_timer_stop>, updating the
		2126	timeout to the C<repeat> value and calling C<ev_timer_start>.
1196		2127
		2128	The exact semantics are as in the following rules, all of which will be
		2129	applied to the watcher:
		2130
		2131	=over 4
		2132
1197	If the timer is pending, its pending status is cleared.	2133	=item If the timer is pending, the pending status is always cleared.
1198		2134
1199	If the timer is started but nonrepeating, stop it (as if it timed out).	2135	=item If the timer is started but non-repeating, stop it (as if it timed
		2136	out, without invoking it).
1200		2137
1201	If the timer is repeating, either start it if necessary (with the	2138	=item If the timer is repeating, make the C<repeat> value the new timeout
1202	C<repeat> value), or reset the running timer to the C<repeat> value.	2139	and start the timer, if necessary.
1203		2140
1204	This sounds a bit complicated, but here is a useful and typical	2141	=back
1205	example: Imagine you have a tcp connection and you want a so-called idle
1206	timeout, that is, you want to be called when there have been, say, 60
1207	seconds of inactivity on the socket. The easiest way to do this is to
1208	configure an C<ev_timer> with a C<repeat> value of C<60> and then call
1209	C<ev_timer_again> each time you successfully read or write some data. If
1210	you go into an idle state where you do not expect data to travel on the
1211	socket, you can C<ev_timer_stop> the timer, and C<ev_timer_again> will
1212	automatically restart it if need be.
1213		2142
1214	That means you can ignore the C<after> value and C<ev_timer_start>	2143	This sounds a bit complicated, see L</Be smart about timeouts>, above, for a
1215	altogether and only ever use the C<repeat> value and C<ev_timer_again>:	2144	usage example.
1216		2145
1217	ev_timer_init (timer, callback, 0., 5.);	2146	=item ev_tstamp ev_timer_remaining (loop, ev_timer *)
1218	ev_timer_again (loop, timer);
1219	...
1220	timer->again = 17.;
1221	ev_timer_again (loop, timer);
1222	...
1223	timer->again = 10.;
1224	ev_timer_again (loop, timer);
1225		2147
1226	This is more slightly efficient then stopping/starting the timer each time	2148	Returns the remaining time until a timer fires. If the timer is active,
1227	you want to modify its timeout value.	2149	then this time is relative to the current event loop time, otherwise it's
		2150	the timeout value currently configured.
		2151
		2152	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns
		2153	C<5>. When the timer is started and one second passes, C<ev_timer_remaining>
		2154	will return C<4>. When the timer expires and is restarted, it will return
		2155	roughly C<7> (likely slightly less as callback invocation takes some time,
		2156	too), and so on.
1228		2157
1229	=item ev_tstamp repeat [read-write]	2158	=item ev_tstamp repeat [read-write]
1230		2159
1231	The current C<repeat> value. Will be used each time the watcher times out	2160	The current C<repeat> value. Will be used each time the watcher times out
1232	or C<ev_timer_again> is called and determines the next timeout (if any),	2161	or C<ev_timer_again> is called, and determines the next timeout (if any),
1233	which is also when any modifications are taken into account.	2162	which is also when any modifications are taken into account.
1234		2163
1235	=back	2164	=back
1236		2165
1237	=head3 Examples	2166	=head3 Examples
1238		2167
1239	Example: Create a timer that fires after 60 seconds.	2168	Example: Create a timer that fires after 60 seconds.
1240		2169
1241	static void	2170	static void
1242	one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)	2171	one_minute_cb (struct ev_loop *loop, ev_timer *w, int revents)
1243	{	2172	{
1244	.. one minute over, w is actually stopped right here	2173	.. one minute over, w is actually stopped right here
1245	}	2174	}
1246		2175
1247	struct ev_timer mytimer;	2176	ev_timer mytimer;
1248	ev_timer_init (&mytimer, one_minute_cb, 60., 0.);	2177	ev_timer_init (&mytimer, one_minute_cb, 60., 0.);
1249	ev_timer_start (loop, &mytimer);	2178	ev_timer_start (loop, &mytimer);
1250		2179
1251	Example: Create a timeout timer that times out after 10 seconds of	2180	Example: Create a timeout timer that times out after 10 seconds of
1252	inactivity.	2181	inactivity.
1253		2182
1254	static void	2183	static void
1255	timeout_cb (struct ev_loop *loop, struct ev_timer *w, int revents)	2184	timeout_cb (struct ev_loop *loop, ev_timer *w, int revents)
1256	{	2185	{
1257	.. ten seconds without any activity	2186	.. ten seconds without any activity
1258	}	2187	}
1259		2188
1260	struct ev_timer mytimer;	2189	ev_timer mytimer;
1261	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */	2190	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
1262	ev_timer_again (&mytimer); /* start timer */	2191	ev_timer_again (&mytimer); /* start timer */
1263	ev_loop (loop, 0);	2192	ev_run (loop, 0);
1264		2193
1265	// and in some piece of code that gets executed on any "activity":	2194	// and in some piece of code that gets executed on any "activity":
1266	// reset the timeout to start ticking again at 10 seconds	2195	// reset the timeout to start ticking again at 10 seconds
1267	ev_timer_again (&mytimer);	2196	ev_timer_again (&mytimer);
1268		2197
1269		2198
1270	=head2 C<ev_periodic> - to cron or not to cron?	2199	=head2 C<ev_periodic> - to cron or not to cron?
1271		2200
1272	Periodic watchers are also timers of a kind, but they are very versatile	2201	Periodic watchers are also timers of a kind, but they are very versatile
1273	(and unfortunately a bit complex).	2202	(and unfortunately a bit complex).
1274		2203
1275	Unlike C<ev_timer>'s, they are not based on real time (or relative time)	2204	Unlike C<ev_timer>, periodic watchers are not based on real time (or
1276	but on wallclock time (absolute time). You can tell a periodic watcher	2205	relative time, the physical time that passes) but on wall clock time
1277	to trigger "at" some specific point in time. For example, if you tell a	2206	(absolute time, the thing you can read on your calender or clock). The
1278	periodic watcher to trigger in 10 seconds (by specifiying e.g. C<ev_now ()	2207	difference is that wall clock time can run faster or slower than real
1279	+ 10.>) and then reset your system clock to the last year, then it will	2208	time, and time jumps are not uncommon (e.g. when you adjust your
1280	take a year to trigger the event (unlike an C<ev_timer>, which would trigger	2209	wrist-watch).
1281	roughly 10 seconds later).
1282		2210
1283	They can also be used to implement vastly more complex timers, such as	2211	You can tell a periodic watcher to trigger after some specific point
1284	triggering an event on each midnight, local time or other, complicated,	2212	in time: for example, if you tell a periodic watcher to trigger "in 10
1285	rules.	2213	seconds" (by specifying e.g. C<ev_now () + 10.>, that is, an absolute time
		2214	not a delay) and then reset your system clock to January of the previous
		2215	year, then it will take a year or more to trigger the event (unlike an
		2216	C<ev_timer>, which would still trigger roughly 10 seconds after starting
		2217	it, as it uses a relative timeout).
1286		2218
		2219	C<ev_periodic> watchers can also be used to implement vastly more complex
		2220	timers, such as triggering an event on each "midnight, local time", or
		2221	other complicated rules. This cannot be done with C<ev_timer> watchers, as
		2222	those cannot react to time jumps.
		2223
1287	As with timers, the callback is guarenteed to be invoked only when the	2224	As with timers, the callback is guaranteed to be invoked only when the
1288	time (C<at>) has been passed, but if multiple periodic timers become ready	2225	point in time where it is supposed to trigger has passed. If multiple
1289	during the same loop iteration then order of execution is undefined.	2226	timers become ready during the same loop iteration then the ones with
		2227	earlier time-out values are invoked before ones with later time-out values
		2228	(but this is no longer true when a callback calls C<ev_run> recursively).
1290		2229
1291	=head3 Watcher-Specific Functions and Data Members	2230	=head3 Watcher-Specific Functions and Data Members
1292		2231
1293	=over 4	2232	=over 4
1294		2233
1295	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)	2234	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp offset, ev_tstamp interval, reschedule_cb)
1296		2235
1297	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)	2236	=item ev_periodic_set (ev_periodic *, ev_tstamp offset, ev_tstamp interval, reschedule_cb)
1298		2237
1299	Lots of arguments, lets sort it out... There are basically three modes of	2238	Lots of arguments, let's sort it out... There are basically three modes of
1300	operation, and we will explain them from simplest to complex:	2239	operation, and we will explain them from simplest to most complex:
1301		2240
1302	=over 4	2241	=over 4
1303		2242
1304	=item * absolute timer (at = time, interval = reschedule_cb = 0)	2243	=item * absolute timer (offset = absolute time, interval = 0, reschedule_cb = 0)
1305		2244
1306	In this configuration the watcher triggers an event at the wallclock time	2245	In this configuration the watcher triggers an event after the wall clock
1307	C<at> and doesn't repeat. It will not adjust when a time jump occurs,	2246	time C<offset> has passed. It will not repeat and will not adjust when a
1308	that is, if it is to be run at January 1st 2011 then it will run when the	2247	time jump occurs, that is, if it is to be run at January 1st 2011 then it
1309	system time reaches or surpasses this time.	2248	will be stopped and invoked when the system clock reaches or surpasses
		2249	this point in time.
1310		2250
1311	=item * repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)	2251	=item * repeating interval timer (offset = offset within interval, interval > 0, reschedule_cb = 0)
1312		2252
1313	In this mode the watcher will always be scheduled to time out at the next	2253	In this mode the watcher will always be scheduled to time out at the next
1314	C<at + N * interval> time (for some integer N, which can also be negative)	2254	C<offset + N * interval> time (for some integer N, which can also be
1315	and then repeat, regardless of any time jumps.	2255	negative) and then repeat, regardless of any time jumps. The C<offset>
		2256	argument is merely an offset into the C<interval> periods.
1316		2257
1317	This can be used to create timers that do not drift with respect to system	2258	This can be used to create timers that do not drift with respect to the
1318	time:	2259	system clock, for example, here is an C<ev_periodic> that triggers each
		2260	hour, on the hour (with respect to UTC):
1319		2261
1320	ev_periodic_set (&periodic, 0., 3600., 0);	2262	ev_periodic_set (&periodic, 0., 3600., 0);
1321		2263
1322	This doesn't mean there will always be 3600 seconds in between triggers,	2264	This doesn't mean there will always be 3600 seconds in between triggers,
1323	but only that the the callback will be called when the system time shows a	2265	but only that the callback will be called when the system time shows a
1324	full hour (UTC), or more correctly, when the system time is evenly divisible	2266	full hour (UTC), or more correctly, when the system time is evenly divisible
1325	by 3600.	2267	by 3600.
1326		2268
1327	Another way to think about it (for the mathematically inclined) is that	2269	Another way to think about it (for the mathematically inclined) is that
1328	C<ev_periodic> will try to run the callback in this mode at the next possible	2270	C<ev_periodic> will try to run the callback in this mode at the next possible
1329	time where C<time = at (mod interval)>, regardless of any time jumps.	2271	time where C<time = offset (mod interval)>, regardless of any time jumps.
1330		2272
1331	For numerical stability it is preferable that the C<at> value is near	2273	The C<interval> I<MUST> be positive, and for numerical stability, the
1332	C<ev_now ()> (the current time), but there is no range requirement for	2274	interval value should be higher than C<1/8192> (which is around 100
1333	this value.	2275	microseconds) and C<offset> should be higher than C<0> and should have
		2276	at most a similar magnitude as the current time (say, within a factor of
		2277	ten). Typical values for offset are, in fact, C<0> or something between
		2278	C<0> and C<interval>, which is also the recommended range.
1334		2279
		2280	Note also that there is an upper limit to how often a timer can fire (CPU
		2281	speed for example), so if C<interval> is very small then timing stability
		2282	will of course deteriorate. Libev itself tries to be exact to be about one
		2283	millisecond (if the OS supports it and the machine is fast enough).
		2284
1335	=item * manual reschedule mode (at and interval ignored, reschedule_cb = callback)	2285	=item * manual reschedule mode (offset ignored, interval ignored, reschedule_cb = callback)
1336		2286
1337	In this mode the values for C<interval> and C<at> are both being	2287	In this mode the values for C<interval> and C<offset> are both being
1338	ignored. Instead, each time the periodic watcher gets scheduled, the	2288	ignored. Instead, each time the periodic watcher gets scheduled, the
1339	reschedule callback will be called with the watcher as first, and the	2289	reschedule callback will be called with the watcher as first, and the
1340	current time as second argument.	2290	current time as second argument.
1341		2291
1342	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,	2292	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher, ever,
1343	ever, or make any event loop modifications>. If you need to stop it,	2293	or make ANY other event loop modifications whatsoever, unless explicitly
1344	return C<now + 1e30> (or so, fudge fudge) and stop it afterwards (e.g. by	2294	allowed by documentation here>.
1345	starting an C<ev_prepare> watcher, which is legal).
1346		2295
		2296	If you need to stop it, return C<now + 1e30> (or so, fudge fudge) and stop
		2297	it afterwards (e.g. by starting an C<ev_prepare> watcher, which is the
		2298	only event loop modification you are allowed to do).
		2299
1347	Its prototype is C<ev_tstamp (*reschedule_cb)(struct ev_periodic *w,	2300	The callback prototype is C<ev_tstamp (*reschedule_cb)(ev_periodic
1348	ev_tstamp now)>, e.g.:	2301	*w, ev_tstamp now)>, e.g.:
1349		2302
		2303	static ev_tstamp
1350	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)	2304	my_rescheduler (ev_periodic *w, ev_tstamp now)
1351	{	2305	{
1352	return now + 60.;	2306	return now + 60.;
1353	}	2307	}
1354		2308
1355	It must return the next time to trigger, based on the passed time value	2309	It must return the next time to trigger, based on the passed time value
1356	(that is, the lowest time value larger than to the second argument). It	2310	(that is, the lowest time value larger than to the second argument). It
1357	will usually be called just before the callback will be triggered, but	2311	will usually be called just before the callback will be triggered, but
1358	might be called at other times, too.	2312	might be called at other times, too.
1359		2313
1360	NOTE: I<< This callback must always return a time that is later than the	2314	NOTE: I<< This callback must always return a time that is higher than or
1361	passed C<now> value >>. Not even C<now> itself will do, it I<must> be larger.	2315	equal to the passed C<now> value >>.
1362		2316
1363	This can be used to create very complex timers, such as a timer that	2317	This can be used to create very complex timers, such as a timer that
1364	triggers on each midnight, local time. To do this, you would calculate the	2318	triggers on "next midnight, local time". To do this, you would calculate the
1365	next midnight after C<now> and return the timestamp value for this. How	2319	next midnight after C<now> and return the timestamp value for this. How
1366	you do this is, again, up to you (but it is not trivial, which is the main	2320	you do this is, again, up to you (but it is not trivial, which is the main
1367	reason I omitted it as an example).	2321	reason I omitted it as an example).
1368		2322
1369	=back	2323	=back
…		…
1373	Simply stops and restarts the periodic watcher again. This is only useful	2327	Simply stops and restarts the periodic watcher again. This is only useful
1374	when you changed some parameters or the reschedule callback would return	2328	when you changed some parameters or the reschedule callback would return
1375	a different time than the last time it was called (e.g. in a crond like	2329	a different time than the last time it was called (e.g. in a crond like
1376	program when the crontabs have changed).	2330	program when the crontabs have changed).
1377		2331
		2332	=item ev_tstamp ev_periodic_at (ev_periodic *)
		2333
		2334	When active, returns the absolute time that the watcher is supposed
		2335	to trigger next. This is not the same as the C<offset> argument to
		2336	C<ev_periodic_set>, but indeed works even in interval and manual
		2337	rescheduling modes.
		2338
1378	=item ev_tstamp offset [read-write]	2339	=item ev_tstamp offset [read-write]
1379		2340
1380	When repeating, this contains the offset value, otherwise this is the	2341	When repeating, this contains the offset value, otherwise this is the
1381	absolute point in time (the C<at> value passed to C<ev_periodic_set>).	2342	absolute point in time (the C<offset> value passed to C<ev_periodic_set>,
		2343	although libev might modify this value for better numerical stability).
1382		2344
1383	Can be modified any time, but changes only take effect when the periodic	2345	Can be modified any time, but changes only take effect when the periodic
1384	timer fires or C<ev_periodic_again> is being called.	2346	timer fires or C<ev_periodic_again> is being called.
1385		2347
1386	=item ev_tstamp interval [read-write]	2348	=item ev_tstamp interval [read-write]
1387		2349
1388	The current interval value. Can be modified any time, but changes only	2350	The current interval value. Can be modified any time, but changes only
1389	take effect when the periodic timer fires or C<ev_periodic_again> is being	2351	take effect when the periodic timer fires or C<ev_periodic_again> is being
1390	called.	2352	called.
1391		2353
1392	=item ev_tstamp (*reschedule_cb)(struct ev_periodic *w, ev_tstamp now) [read-write]	2354	=item ev_tstamp (*reschedule_cb)(ev_periodic *w, ev_tstamp now) [read-write]
1393		2355
1394	The current reschedule callback, or C<0>, if this functionality is	2356	The current reschedule callback, or C<0>, if this functionality is
1395	switched off. Can be changed any time, but changes only take effect when	2357	switched off. Can be changed any time, but changes only take effect when
1396	the periodic timer fires or C<ev_periodic_again> is being called.	2358	the periodic timer fires or C<ev_periodic_again> is being called.
1397		2359
1398	=item ev_tstamp at [read-only]
1399
1400	When active, contains the absolute time that the watcher is supposed to
1401	trigger next.
1402
1403	=back	2360	=back
1404		2361
1405	=head3 Examples	2362	=head3 Examples
1406		2363
1407	Example: Call a callback every hour, or, more precisely, whenever the	2364	Example: Call a callback every hour, or, more precisely, whenever the
1408	system clock is divisible by 3600. The callback invocation times have	2365	system time is divisible by 3600. The callback invocation times have
1409	potentially a lot of jittering, but good long-term stability.	2366	potentially a lot of jitter, but good long-term stability.
1410		2367
1411	static void	2368	static void
1412	clock_cb (struct ev_loop *loop, struct ev_io *w, int revents)	2369	clock_cb (struct ev_loop *loop, ev_periodic *w, int revents)
1413	{	2370	{
1414	... its now a full hour (UTC, or TAI or whatever your clock follows)	2371	... its now a full hour (UTC, or TAI or whatever your clock follows)
1415	}	2372	}
1416		2373
1417	struct ev_periodic hourly_tick;	2374	ev_periodic hourly_tick;
1418	ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);	2375	ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);
1419	ev_periodic_start (loop, &hourly_tick);	2376	ev_periodic_start (loop, &hourly_tick);
1420		2377
1421	Example: The same as above, but use a reschedule callback to do it:	2378	Example: The same as above, but use a reschedule callback to do it:
1422		2379
1423	#include <math.h>	2380	#include <math.h>
1424		2381
1425	static ev_tstamp	2382	static ev_tstamp
1426	my_scheduler_cb (struct ev_periodic *w, ev_tstamp now)	2383	my_scheduler_cb (ev_periodic *w, ev_tstamp now)
1427	{	2384	{
1428	return fmod (now, 3600.) + 3600.;	2385	return now + (3600. - fmod (now, 3600.));
1429	}	2386	}
1430		2387
1431	ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);	2388	ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);
1432		2389
1433	Example: Call a callback every hour, starting now:	2390	Example: Call a callback every hour, starting now:
1434		2391
1435	struct ev_periodic hourly_tick;	2392	ev_periodic hourly_tick;
1436	ev_periodic_init (&hourly_tick, clock_cb,	2393	ev_periodic_init (&hourly_tick, clock_cb,
1437	fmod (ev_now (loop), 3600.), 3600., 0);	2394	fmod (ev_now (loop), 3600.), 3600., 0);
1438	ev_periodic_start (loop, &hourly_tick);	2395	ev_periodic_start (loop, &hourly_tick);
1439		2396
1440		2397
1441	=head2 C<ev_signal> - signal me when a signal gets signalled!	2398	=head2 C<ev_signal> - signal me when a signal gets signalled!
1442		2399
1443	Signal watchers will trigger an event when the process receives a specific	2400	Signal watchers will trigger an event when the process receives a specific
1444	signal one or more times. Even though signals are very asynchronous, libev	2401	signal one or more times. Even though signals are very asynchronous, libev
1445	will try it's best to deliver signals synchronously, i.e. as part of the	2402	will try its best to deliver signals synchronously, i.e. as part of the
1446	normal event processing, like any other event.	2403	normal event processing, like any other event.
1447		2404
		2405	If you want signals to be delivered truly asynchronously, just use
		2406	C<sigaction> as you would do without libev and forget about sharing
		2407	the signal. You can even use C<ev_async> from a signal handler to
		2408	synchronously wake up an event loop.
		2409
1448	You can configure as many watchers as you like per signal. Only when the	2410	You can configure as many watchers as you like for the same signal, but
		2411	only within the same loop, i.e. you can watch for C<SIGINT> in your
		2412	default loop and for C<SIGIO> in another loop, but you cannot watch for
		2413	C<SIGINT> in both the default loop and another loop at the same time. At
		2414	the moment, C<SIGCHLD> is permanently tied to the default loop.
		2415
1449	first watcher gets started will libev actually register a signal watcher	2416	When the first watcher gets started will libev actually register something
1450	with the kernel (thus it coexists with your own signal handlers as long	2417	with the kernel (thus it coexists with your own signal handlers as long as
1451	as you don't register any with libev). Similarly, when the last signal	2418	you don't register any with libev for the same signal).
1452	watcher for a signal is stopped libev will reset the signal handler to
1453	SIG_DFL (regardless of what it was set to before).
1454		2419
1455	If possible and supported, libev will install its handlers with	2420	If possible and supported, libev will install its handlers with
1456	C<SA_RESTART> behaviour enabled, so syscalls should not be unduly	2421	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should
1457	interrupted. If you have a problem with syscalls getting interrupted by	2422	not be unduly interrupted. If you have a problem with system calls getting
1458	signals you can block all signals in an C<ev_check> watcher and unblock	2423	interrupted by signals you can block all signals in an C<ev_check> watcher
1459	them in an C<ev_prepare> watcher.	2424	and unblock them in an C<ev_prepare> watcher.
		2425
		2426	=head3 The special problem of inheritance over fork/execve/pthread_create
		2427
		2428	Both the signal mask (C<sigprocmask>) and the signal disposition
		2429	(C<sigaction>) are unspecified after starting a signal watcher (and after
		2430	stopping it again), that is, libev might or might not block the signal,
		2431	and might or might not set or restore the installed signal handler (but
		2432	see C<EVFLAG_NOSIGMASK>).
		2433
		2434	While this does not matter for the signal disposition (libev never
		2435	sets signals to C<SIG_IGN>, so handlers will be reset to C<SIG_DFL> on
		2436	C<execve>), this matters for the signal mask: many programs do not expect
		2437	certain signals to be blocked.
		2438
		2439	This means that before calling C<exec> (from the child) you should reset
		2440	the signal mask to whatever "default" you expect (all clear is a good
		2441	choice usually).
		2442
		2443	The simplest way to ensure that the signal mask is reset in the child is
		2444	to install a fork handler with C<pthread_atfork> that resets it. That will
		2445	catch fork calls done by libraries (such as the libc) as well.
		2446
		2447	In current versions of libev, the signal will not be blocked indefinitely
		2448	unless you use the C<signalfd> API (C<EV_SIGNALFD>). While this reduces
		2449	the window of opportunity for problems, it will not go away, as libev
		2450	I<has> to modify the signal mask, at least temporarily.
		2451
		2452	So I can't stress this enough: I<If you do not reset your signal mask when
		2453	you expect it to be empty, you have a race condition in your code>. This
		2454	is not a libev-specific thing, this is true for most event libraries.
		2455
		2456	=head3 The special problem of threads signal handling
		2457
		2458	POSIX threads has problematic signal handling semantics, specifically,
		2459	a lot of functionality (sigfd, sigwait etc.) only really works if all
		2460	threads in a process block signals, which is hard to achieve.
		2461
		2462	When you want to use sigwait (or mix libev signal handling with your own
		2463	for the same signals), you can tackle this problem by globally blocking
		2464	all signals before creating any threads (or creating them with a fully set
		2465	sigprocmask) and also specifying the C<EVFLAG_NOSIGMASK> when creating
		2466	loops. Then designate one thread as "signal receiver thread" which handles
		2467	these signals. You can pass on any signals that libev might be interested
		2468	in by calling C<ev_feed_signal>.
1460		2469
1461	=head3 Watcher-Specific Functions and Data Members	2470	=head3 Watcher-Specific Functions and Data Members
1462		2471
1463	=over 4	2472	=over 4
1464		2473
…		…
1475		2484
1476	=back	2485	=back
1477		2486
1478	=head3 Examples	2487	=head3 Examples
1479		2488
1480	Example: Try to exit cleanly on SIGINT and SIGTERM.	2489	Example: Try to exit cleanly on SIGINT.
1481		2490
1482	static void	2491	static void
1483	sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)	2492	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)
1484	{	2493	{
1485	ev_unloop (loop, EVUNLOOP_ALL);	2494	ev_break (loop, EVBREAK_ALL);
1486	}	2495	}
1487		2496
1488	struct ev_signal signal_watcher;	2497	ev_signal signal_watcher;
1489	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	2498	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
1490	ev_signal_start (loop, &sigint_cb);	2499	ev_signal_start (loop, &signal_watcher);
1491		2500
1492		2501
1493	=head2 C<ev_child> - watch out for process status changes	2502	=head2 C<ev_child> - watch out for process status changes
1494		2503
1495	Child watchers trigger when your process receives a SIGCHLD in response to	2504	Child watchers trigger when your process receives a SIGCHLD in response to
1496	some child status changes (most typically when a child of yours dies). It	2505	some child status changes (most typically when a child of yours dies or
1497	is permissible to install a child watcher I<after> the child has been	2506	exits). It is permissible to install a child watcher I<after> the child
1498	forked (which implies it might have already exited), as long as the event	2507	has been forked (which implies it might have already exited), as long
1499	loop isn't entered (or is continued from a watcher).	2508	as the event loop isn't entered (or is continued from a watcher), i.e.,
		2509	forking and then immediately registering a watcher for the child is fine,
		2510	but forking and registering a watcher a few event loop iterations later or
		2511	in the next callback invocation is not.
1500		2512
1501	Only the default event loop is capable of handling signals, and therefore	2513	Only the default event loop is capable of handling signals, and therefore
1502	you can only rgeister child watchers in the default event loop.	2514	you can only register child watchers in the default event loop.
		2515
		2516	Due to some design glitches inside libev, child watchers will always be
		2517	handled at maximum priority (their priority is set to C<EV_MAXPRI> by
		2518	libev)
1503		2519
1504	=head3 Process Interaction	2520	=head3 Process Interaction
1505		2521
1506	Libev grabs C<SIGCHLD> as soon as the default event loop is	2522	Libev grabs C<SIGCHLD> as soon as the default event loop is
1507	initialised. This is necessary to guarantee proper behaviour even if	2523	initialised. This is necessary to guarantee proper behaviour even if the
1508	the first child watcher is started after the child exits. The occurance	2524	first child watcher is started after the child exits. The occurrence
1509	of C<SIGCHLD> is recorded asynchronously, but child reaping is done	2525	of C<SIGCHLD> is recorded asynchronously, but child reaping is done
1510	synchronously as part of the event loop processing. Libev always reaps all	2526	synchronously as part of the event loop processing. Libev always reaps all
1511	children, even ones not watched.	2527	children, even ones not watched.
1512		2528
1513	=head3 Overriding the Built-In Processing	2529	=head3 Overriding the Built-In Processing
…		…
1517	handler, you can override it easily by installing your own handler for	2533	handler, you can override it easily by installing your own handler for
1518	C<SIGCHLD> after initialising the default loop, and making sure the	2534	C<SIGCHLD> after initialising the default loop, and making sure the
1519	default loop never gets destroyed. You are encouraged, however, to use an	2535	default loop never gets destroyed. You are encouraged, however, to use an
1520	event-based approach to child reaping and thus use libev's support for	2536	event-based approach to child reaping and thus use libev's support for
1521	that, so other libev users can use C<ev_child> watchers freely.	2537	that, so other libev users can use C<ev_child> watchers freely.
		2538
		2539	=head3 Stopping the Child Watcher
		2540
		2541	Currently, the child watcher never gets stopped, even when the
		2542	child terminates, so normally one needs to stop the watcher in the
		2543	callback. Future versions of libev might stop the watcher automatically
		2544	when a child exit is detected (calling C<ev_child_stop> twice is not a
		2545	problem).
1522		2546
1523	=head3 Watcher-Specific Functions and Data Members	2547	=head3 Watcher-Specific Functions and Data Members
1524		2548
1525	=over 4	2549	=over 4
1526		2550
…		…
1555	=head3 Examples	2579	=head3 Examples
1556		2580
1557	Example: C<fork()> a new process and install a child handler to wait for	2581	Example: C<fork()> a new process and install a child handler to wait for
1558	its completion.	2582	its completion.
1559		2583
1560	ev_child cw;	2584	ev_child cw;
1561		2585
1562	static void	2586	static void
1563	child_cb (EV_P_ struct ev_child *w, int revents)	2587	child_cb (EV_P_ ev_child *w, int revents)
1564	{	2588	{
1565	ev_child_stop (EV_A_ w);	2589	ev_child_stop (EV_A_ w);
1566	printf ("process %d exited with status %x\n", w->rpid, w->rstatus);	2590	printf ("process %d exited with status %x\n", w->rpid, w->rstatus);
1567	}	2591	}
1568		2592
1569	pid_t pid = fork ();	2593	pid_t pid = fork ();
1570		2594
1571	if (pid < 0)	2595	if (pid < 0)
1572	// error	2596	// error
1573	else if (pid == 0)	2597	else if (pid == 0)
1574	{	2598	{
1575	// the forked child executes here	2599	// the forked child executes here
1576	exit (1);	2600	exit (1);
1577	}	2601	}
1578	else	2602	else
1579	{	2603	{
1580	ev_child_init (&cw, child_cb, pid, 0);	2604	ev_child_init (&cw, child_cb, pid, 0);
1581	ev_child_start (EV_DEFAULT_ &cw);	2605	ev_child_start (EV_DEFAULT_ &cw);
1582	}	2606	}
1583		2607
1584		2608
1585	=head2 C<ev_stat> - did the file attributes just change?	2609	=head2 C<ev_stat> - did the file attributes just change?
1586		2610
1587	This watches a filesystem path for attribute changes. That is, it calls	2611	This watches a file system path for attribute changes. That is, it calls
1588	C<stat> regularly (or when the OS says it changed) and sees if it changed	2612	C<stat> on that path in regular intervals (or when the OS says it changed)
1589	compared to the last time, invoking the callback if it did.	2613	and sees if it changed compared to the last time, invoking the callback
		2614	if it did. Starting the watcher C<stat>'s the file, so only changes that
		2615	happen after the watcher has been started will be reported.
1590		2616
1591	The path does not need to exist: changing from "path exists" to "path does	2617	The path does not need to exist: changing from "path exists" to "path does
1592	not exist" is a status change like any other. The condition "path does	2618	not exist" is a status change like any other. The condition "path does not
1593	not exist" is signified by the C<st_nlink> field being zero (which is	2619	exist" (or more correctly "path cannot be stat'ed") is signified by the
1594	otherwise always forced to be at least one) and all the other fields of	2620	C<st_nlink> field being zero (which is otherwise always forced to be at
1595	the stat buffer having unspecified contents.	2621	least one) and all the other fields of the stat buffer having unspecified
		2622	contents.
1596		2623
1597	The path I<should> be absolute and I<must not> end in a slash. If it is	2624	The path I<must not> end in a slash or contain special components such as
		2625	C<.> or C<..>. The path I<should> be absolute: If it is relative and
1598	relative and your working directory changes, the behaviour is undefined.	2626	your working directory changes, then the behaviour is undefined.
1599		2627
1600	Since there is no standard to do this, the portable implementation simply	2628	Since there is no portable change notification interface available, the
1601	calls C<stat (2)> regularly on the path to see if it changed somehow. You	2629	portable implementation simply calls C<stat(2)> regularly on the path
1602	can specify a recommended polling interval for this case. If you specify	2630	to see if it changed somehow. You can specify a recommended polling
1603	a polling interval of C<0> (highly recommended!) then a I<suitable,	2631	interval for this case. If you specify a polling interval of C<0> (highly
1604	unspecified default> value will be used (which you can expect to be around	2632	recommended!) then a I<suitable, unspecified default> value will be used
1605	five seconds, although this might change dynamically). Libev will also	2633	(which you can expect to be around five seconds, although this might
1606	impose a minimum interval which is currently around C<0.1>, but thats	2634	change dynamically). Libev will also impose a minimum interval which is
1607	usually overkill.	2635	currently around C<0.1>, but that's usually overkill.
1608		2636
1609	This watcher type is not meant for massive numbers of stat watchers,	2637	This watcher type is not meant for massive numbers of stat watchers,
1610	as even with OS-supported change notifications, this can be	2638	as even with OS-supported change notifications, this can be
1611	resource-intensive.	2639	resource-intensive.
1612		2640
1613	At the time of this writing, only the Linux inotify interface is	2641	At the time of this writing, the only OS-specific interface implemented
1614	implemented (implementing kqueue support is left as an exercise for the	2642	is the Linux inotify interface (implementing kqueue support is left as an
1615	reader). Inotify will be used to give hints only and should not change the	2643	exercise for the reader. Note, however, that the author sees no way of
1616	semantics of C<ev_stat> watchers, which means that libev sometimes needs	2644	implementing C<ev_stat> semantics with kqueue, except as a hint).
1617	to fall back to regular polling again even with inotify, but changes are
1618	usually detected immediately, and if the file exists there will be no
1619	polling.
1620		2645
1621	=head3 ABI Issues (Largefile Support)	2646	=head3 ABI Issues (Largefile Support)
1622		2647
1623	Libev by default (unless the user overrides this) uses the default	2648	Libev by default (unless the user overrides this) uses the default
1624	compilation environment, which means that on systems with optionally	2649	compilation environment, which means that on systems with large file
1625	disabled large file support, you get the 32 bit version of the stat	2650	support disabled by default, you get the 32 bit version of the stat
1626	structure. When using the library from programs that change the ABI to	2651	structure. When using the library from programs that change the ABI to
1627	use 64 bit file offsets the programs will fail. In that case you have to	2652	use 64 bit file offsets the programs will fail. In that case you have to
1628	compile libev with the same flags to get binary compatibility. This is	2653	compile libev with the same flags to get binary compatibility. This is
1629	obviously the case with any flags that change the ABI, but the problem is	2654	obviously the case with any flags that change the ABI, but the problem is
1630	most noticably with ev_stat and largefile support.	2655	most noticeably displayed with ev_stat and large file support.
1631		2656
1632	=head3 Inotify	2657	The solution for this is to lobby your distribution maker to make large
		2658	file interfaces available by default (as e.g. FreeBSD does) and not
		2659	optional. Libev cannot simply switch on large file support because it has
		2660	to exchange stat structures with application programs compiled using the
		2661	default compilation environment.
1633		2662
		2663	=head3 Inotify and Kqueue
		2664
1634	When C<inotify (7)> support has been compiled into libev (generally only	2665	When C<inotify (7)> support has been compiled into libev and present at
1635	available on Linux) and present at runtime, it will be used to speed up	2666	runtime, it will be used to speed up change detection where possible. The
1636	change detection where possible. The inotify descriptor will be created lazily	2667	inotify descriptor will be created lazily when the first C<ev_stat>
1637	when the first C<ev_stat> watcher is being started.	2668	watcher is being started.
1638		2669
1639	Inotify presence does not change the semantics of C<ev_stat> watchers	2670	Inotify presence does not change the semantics of C<ev_stat> watchers
1640	except that changes might be detected earlier, and in some cases, to avoid	2671	except that changes might be detected earlier, and in some cases, to avoid
1641	making regular C<stat> calls. Even in the presence of inotify support	2672	making regular C<stat> calls. Even in the presence of inotify support
1642	there are many cases where libev has to resort to regular C<stat> polling.	2673	there are many cases where libev has to resort to regular C<stat> polling,
		2674	but as long as kernel 2.6.25 or newer is used (2.6.24 and older have too
		2675	many bugs), the path exists (i.e. stat succeeds), and the path resides on
		2676	a local filesystem (libev currently assumes only ext2/3, jfs, reiserfs and
		2677	xfs are fully working) libev usually gets away without polling.
1643		2678
1644	(There is no support for kqueue, as apparently it cannot be used to	2679	There is no support for kqueue, as apparently it cannot be used to
1645	implement this functionality, due to the requirement of having a file	2680	implement this functionality, due to the requirement of having a file
1646	descriptor open on the object at all times).	2681	descriptor open on the object at all times, and detecting renames, unlinks
		2682	etc. is difficult.
		2683
		2684	=head3 C<stat ()> is a synchronous operation
		2685
		2686	Libev doesn't normally do any kind of I/O itself, and so is not blocking
		2687	the process. The exception are C<ev_stat> watchers - those call C<stat
		2688	()>, which is a synchronous operation.
		2689
		2690	For local paths, this usually doesn't matter: unless the system is very
		2691	busy or the intervals between stat's are large, a stat call will be fast,
		2692	as the path data is usually in memory already (except when starting the
		2693	watcher).
		2694
		2695	For networked file systems, calling C<stat ()> can block an indefinite
		2696	time due to network issues, and even under good conditions, a stat call
		2697	often takes multiple milliseconds.
		2698
		2699	Therefore, it is best to avoid using C<ev_stat> watchers on networked
		2700	paths, although this is fully supported by libev.
1647		2701
1648	=head3 The special problem of stat time resolution	2702	=head3 The special problem of stat time resolution
1649		2703
1650	The C<stat ()> syscall only supports full-second resolution portably, and	2704	The C<stat ()> system call only supports full-second resolution portably,
1651	even on systems where the resolution is higher, many filesystems still	2705	and even on systems where the resolution is higher, most file systems
1652	only support whole seconds.	2706	still only support whole seconds.
1653		2707
1654	That means that, if the time is the only thing that changes, you might	2708	That means that, if the time is the only thing that changes, you can
1655	miss updates: on the first update, C<ev_stat> detects a change and calls	2709	easily miss updates: on the first update, C<ev_stat> detects a change and
1656	your callback, which does something. When there is another update within	2710	calls your callback, which does something. When there is another update
1657	the same second, C<ev_stat> will be unable to detect it.	2711	within the same second, C<ev_stat> will be unable to detect unless the
		2712	stat data does change in other ways (e.g. file size).
1658		2713
1659	The solution to this is to delay acting on a change for a second (or till	2714	The solution to this is to delay acting on a change for slightly more
1660	the next second boundary), using a roughly one-second delay C<ev_timer>	2715	than a second (or till slightly after the next full second boundary), using
1661	(C<ev_timer_set (w, 0., 1.01); ev_timer_again (loop, w)>). The C<.01>	2716	a roughly one-second-delay C<ev_timer> (e.g. C<ev_timer_set (w, 0., 1.02);
1662	is added to work around small timing inconsistencies of some operating	2717	ev_timer_again (loop, w)>).
1663	systems.	2718
		2719	The C<.02> offset is added to work around small timing inconsistencies
		2720	of some operating systems (where the second counter of the current time
		2721	might be be delayed. One such system is the Linux kernel, where a call to
		2722	C<gettimeofday> might return a timestamp with a full second later than
		2723	a subsequent C<time> call - if the equivalent of C<time ()> is used to
		2724	update file times then there will be a small window where the kernel uses
		2725	the previous second to update file times but libev might already execute
		2726	the timer callback).
1664		2727
1665	=head3 Watcher-Specific Functions and Data Members	2728	=head3 Watcher-Specific Functions and Data Members
1666		2729
1667	=over 4	2730	=over 4
1668		2731
…		…
1674	C<path>. The C<interval> is a hint on how quickly a change is expected to	2737	C<path>. The C<interval> is a hint on how quickly a change is expected to
1675	be detected and should normally be specified as C<0> to let libev choose	2738	be detected and should normally be specified as C<0> to let libev choose
1676	a suitable value. The memory pointed to by C<path> must point to the same	2739	a suitable value. The memory pointed to by C<path> must point to the same
1677	path for as long as the watcher is active.	2740	path for as long as the watcher is active.
1678		2741
1679	The callback will be receive C<EV_STAT> when a change was detected,	2742	The callback will receive an C<EV_STAT> event when a change was detected,
1680	relative to the attributes at the time the watcher was started (or the	2743	relative to the attributes at the time the watcher was started (or the
1681	last change was detected).	2744	last change was detected).
1682		2745
1683	=item ev_stat_stat (loop, ev_stat *)	2746	=item ev_stat_stat (loop, ev_stat *)
1684		2747
1685	Updates the stat buffer immediately with new values. If you change the	2748	Updates the stat buffer immediately with new values. If you change the
1686	watched path in your callback, you could call this fucntion to avoid	2749	watched path in your callback, you could call this function to avoid
1687	detecting this change (while introducing a race condition). Can also be	2750	detecting this change (while introducing a race condition if you are not
1688	useful simply to find out the new values.	2751	the only one changing the path). Can also be useful simply to find out the
		2752	new values.
1689		2753
1690	=item ev_statdata attr [read-only]	2754	=item ev_statdata attr [read-only]
1691		2755
1692	The most-recently detected attributes of the file. Although the type is of	2756	The most-recently detected attributes of the file. Although the type is
1693	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types	2757	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types
1694	suitable for your system. If the C<st_nlink> member is C<0>, then there	2758	suitable for your system, but you can only rely on the POSIX-standardised
		2759	members to be present. If the C<st_nlink> member is C<0>, then there was
1695	was some error while C<stat>ing the file.	2760	some error while C<stat>ing the file.
1696		2761
1697	=item ev_statdata prev [read-only]	2762	=item ev_statdata prev [read-only]
1698		2763
1699	The previous attributes of the file. The callback gets invoked whenever	2764	The previous attributes of the file. The callback gets invoked whenever
1700	C<prev> != C<attr>.	2765	C<prev> != C<attr>, or, more precisely, one or more of these members
		2766	differ: C<st_dev>, C<st_ino>, C<st_mode>, C<st_nlink>, C<st_uid>,
		2767	C<st_gid>, C<st_rdev>, C<st_size>, C<st_atime>, C<st_mtime>, C<st_ctime>.
1701		2768
1702	=item ev_tstamp interval [read-only]	2769	=item ev_tstamp interval [read-only]
1703		2770
1704	The specified interval.	2771	The specified interval.
1705		2772
1706	=item const char *path [read-only]	2773	=item const char *path [read-only]
1707		2774
1708	The filesystem path that is being watched.	2775	The file system path that is being watched.
1709		2776
1710	=back	2777	=back
1711		2778
1712	=head3 Examples	2779	=head3 Examples
1713		2780
1714	Example: Watch C</etc/passwd> for attribute changes.	2781	Example: Watch C</etc/passwd> for attribute changes.
1715		2782
1716	static void	2783	static void
1717	passwd_cb (struct ev_loop *loop, ev_stat *w, int revents)	2784	passwd_cb (struct ev_loop *loop, ev_stat *w, int revents)
1718	{	2785	{
1719	/* /etc/passwd changed in some way */	2786	/* /etc/passwd changed in some way */
1720	if (w->attr.st_nlink)	2787	if (w->attr.st_nlink)
1721	{	2788	{
1722	printf ("passwd current size %ld\n", (long)w->attr.st_size);	2789	printf ("passwd current size %ld\n", (long)w->attr.st_size);
1723	printf ("passwd current atime %ld\n", (long)w->attr.st_mtime);	2790	printf ("passwd current atime %ld\n", (long)w->attr.st_mtime);
1724	printf ("passwd current mtime %ld\n", (long)w->attr.st_mtime);	2791	printf ("passwd current mtime %ld\n", (long)w->attr.st_mtime);
1725	}	2792	}
1726	else	2793	else
1727	/* you shalt not abuse printf for puts */	2794	/* you shalt not abuse printf for puts */
1728	puts ("wow, /etc/passwd is not there, expect problems. "	2795	puts ("wow, /etc/passwd is not there, expect problems. "
1729	"if this is windows, they already arrived\n");	2796	"if this is windows, they already arrived\n");
1730	}	2797	}
1731		2798
1732	...	2799	...
1733	ev_stat passwd;	2800	ev_stat passwd;
1734		2801
1735	ev_stat_init (&passwd, passwd_cb, "/etc/passwd", 0.);	2802	ev_stat_init (&passwd, passwd_cb, "/etc/passwd", 0.);
1736	ev_stat_start (loop, &passwd);	2803	ev_stat_start (loop, &passwd);
1737		2804
1738	Example: Like above, but additionally use a one-second delay so we do not	2805	Example: Like above, but additionally use a one-second delay so we do not
1739	miss updates (however, frequent updates will delay processing, too, so	2806	miss updates (however, frequent updates will delay processing, too, so
1740	one might do the work both on C<ev_stat> callback invocation I<and> on	2807	one might do the work both on C<ev_stat> callback invocation I<and> on
1741	C<ev_timer> callback invocation).	2808	C<ev_timer> callback invocation).
1742		2809
1743	static ev_stat passwd;	2810	static ev_stat passwd;
1744	static ev_timer timer;	2811	static ev_timer timer;
1745		2812
1746	static void	2813	static void
1747	timer_cb (EV_P_ ev_timer *w, int revents)	2814	timer_cb (EV_P_ ev_timer *w, int revents)
1748	{	2815	{
1749	ev_timer_stop (EV_A_ w);	2816	ev_timer_stop (EV_A_ w);
1750		2817
1751	/* now it's one second after the most recent passwd change */	2818	/* now it's one second after the most recent passwd change */
1752	}	2819	}
1753		2820
1754	static void	2821	static void
1755	stat_cb (EV_P_ ev_stat *w, int revents)	2822	stat_cb (EV_P_ ev_stat *w, int revents)
1756	{	2823	{
1757	/* reset the one-second timer */	2824	/* reset the one-second timer */
1758	ev_timer_again (EV_A_ &timer);	2825	ev_timer_again (EV_A_ &timer);
1759	}	2826	}
1760		2827
1761	...	2828	...
1762	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);	2829	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);
1763	ev_stat_start (loop, &passwd);	2830	ev_stat_start (loop, &passwd);
1764	ev_timer_init (&timer, timer_cb, 0., 1.01);	2831	ev_timer_init (&timer, timer_cb, 0., 1.02);
1765		2832
1766		2833
1767	=head2 C<ev_idle> - when you've got nothing better to do...	2834	=head2 C<ev_idle> - when you've got nothing better to do...
1768		2835
1769	Idle watchers trigger events when no other events of the same or higher	2836	Idle watchers trigger events when no other events of the same or higher
1770	priority are pending (prepare, check and other idle watchers do not	2837	priority are pending (prepare, check and other idle watchers do not count
1771	count).	2838	as receiving "events").
1772		2839
1773	That is, as long as your process is busy handling sockets or timeouts	2840	That is, as long as your process is busy handling sockets or timeouts
1774	(or even signals, imagine) of the same or higher priority it will not be	2841	(or even signals, imagine) of the same or higher priority it will not be
1775	triggered. But when your process is idle (or only lower-priority watchers	2842	triggered. But when your process is idle (or only lower-priority watchers
1776	are pending), the idle watchers are being called once per event loop	2843	are pending), the idle watchers are being called once per event loop
…		…
1783	Apart from keeping your process non-blocking (which is a useful	2850	Apart from keeping your process non-blocking (which is a useful
1784	effect on its own sometimes), idle watchers are a good place to do	2851	effect on its own sometimes), idle watchers are a good place to do
1785	"pseudo-background processing", or delay processing stuff to after the	2852	"pseudo-background processing", or delay processing stuff to after the
1786	event loop has handled all outstanding events.	2853	event loop has handled all outstanding events.
1787		2854
		2855	=head3 Abusing an C<ev_idle> watcher for its side-effect
		2856
		2857	As long as there is at least one active idle watcher, libev will never
		2858	sleep unnecessarily. Or in other words, it will loop as fast as possible.
		2859	For this to work, the idle watcher doesn't need to be invoked at all - the
		2860	lowest priority will do.
		2861
		2862	This mode of operation can be useful together with an C<ev_check> watcher,
		2863	to do something on each event loop iteration - for example to balance load
		2864	between different connections.
		2865
		2866	See L</Abusing an ev_check watcher for its side-effect> for a longer
		2867	example.
		2868
1788	=head3 Watcher-Specific Functions and Data Members	2869	=head3 Watcher-Specific Functions and Data Members
1789		2870
1790	=over 4	2871	=over 4
1791		2872
1792	=item ev_idle_init (ev_signal *, callback)	2873	=item ev_idle_init (ev_idle *, callback)
1793		2874
1794	Initialises and configures the idle watcher - it has no parameters of any	2875	Initialises and configures the idle watcher - it has no parameters of any
1795	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,	2876	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,
1796	believe me.	2877	believe me.
1797		2878
…		…
1800	=head3 Examples	2881	=head3 Examples
1801		2882
1802	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the	2883	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the
1803	callback, free it. Also, use no error checking, as usual.	2884	callback, free it. Also, use no error checking, as usual.
1804		2885
1805	static void	2886	static void
1806	idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)	2887	idle_cb (struct ev_loop *loop, ev_idle *w, int revents)
1807	{	2888	{
		2889	// stop the watcher
		2890	ev_idle_stop (loop, w);
		2891
		2892	// now we can free it
1808	free (w);	2893	free (w);
		2894
1809	// now do something you wanted to do when the program has	2895	// now do something you wanted to do when the program has
1810	// no longer anything immediate to do.	2896	// no longer anything immediate to do.
1811	}	2897	}
1812		2898
1813	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));	2899	ev_idle *idle_watcher = malloc (sizeof (ev_idle));
1814	ev_idle_init (idle_watcher, idle_cb);	2900	ev_idle_init (idle_watcher, idle_cb);
1815	ev_idle_start (loop, idle_cb);	2901	ev_idle_start (loop, idle_watcher);
1816		2902
1817		2903
1818	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!	2904	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!
1819		2905
1820	Prepare and check watchers are usually (but not always) used in tandem:	2906	Prepare and check watchers are often (but not always) used in pairs:
1821	prepare watchers get invoked before the process blocks and check watchers	2907	prepare watchers get invoked before the process blocks and check watchers
1822	afterwards.	2908	afterwards.
1823		2909
1824	You I<must not> call C<ev_loop> or similar functions that enter	2910	You I<must not> call C<ev_run> or similar functions that enter
1825	the current event loop from either C<ev_prepare> or C<ev_check>	2911	the current event loop from either C<ev_prepare> or C<ev_check>
1826	watchers. Other loops than the current one are fine, however. The	2912	watchers. Other loops than the current one are fine, however. The
1827	rationale behind this is that you do not need to check for recursion in	2913	rationale behind this is that you do not need to check for recursion in
1828	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,	2914	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,
1829	C<ev_check> so if you have one watcher of each kind they will always be	2915	C<ev_check> so if you have one watcher of each kind they will always be
1830	called in pairs bracketing the blocking call.	2916	called in pairs bracketing the blocking call.
1831		2917
1832	Their main purpose is to integrate other event mechanisms into libev and	2918	Their main purpose is to integrate other event mechanisms into libev and
1833	their use is somewhat advanced. This could be used, for example, to track	2919	their use is somewhat advanced. They could be used, for example, to track
1834	variable changes, implement your own watchers, integrate net-snmp or a	2920	variable changes, implement your own watchers, integrate net-snmp or a
1835	coroutine library and lots more. They are also occasionally useful if	2921	coroutine library and lots more. They are also occasionally useful if
1836	you cache some data and want to flush it before blocking (for example,	2922	you cache some data and want to flush it before blocking (for example,
1837	in X programs you might want to do an C<XFlush ()> in an C<ev_prepare>	2923	in X programs you might want to do an C<XFlush ()> in an C<ev_prepare>
1838	watcher).	2924	watcher).
1839		2925
1840	This is done by examining in each prepare call which file descriptors need	2926	This is done by examining in each prepare call which file descriptors
1841	to be watched by the other library, registering C<ev_io> watchers for	2927	need to be watched by the other library, registering C<ev_io> watchers
1842	them and starting an C<ev_timer> watcher for any timeouts (many libraries	2928	for them and starting an C<ev_timer> watcher for any timeouts (many
1843	provide just this functionality). Then, in the check watcher you check for	2929	libraries provide exactly this functionality). Then, in the check watcher,
1844	any events that occured (by checking the pending status of all watchers	2930	you check for any events that occurred (by checking the pending status
1845	and stopping them) and call back into the library. The I/O and timer	2931	of all watchers and stopping them) and call back into the library. The
1846	callbacks will never actually be called (but must be valid nevertheless,	2932	I/O and timer callbacks will never actually be called (but must be valid
1847	because you never know, you know?).	2933	nevertheless, because you never know, you know?).
1848		2934
1849	As another example, the Perl Coro module uses these hooks to integrate	2935	As another example, the Perl Coro module uses these hooks to integrate
1850	coroutines into libev programs, by yielding to other active coroutines	2936	coroutines into libev programs, by yielding to other active coroutines
1851	during each prepare and only letting the process block if no coroutines	2937	during each prepare and only letting the process block if no coroutines
1852	are ready to run (it's actually more complicated: it only runs coroutines	2938	are ready to run (it's actually more complicated: it only runs coroutines
1853	with priority higher than or equal to the event loop and one coroutine	2939	with priority higher than or equal to the event loop and one coroutine
1854	of lower priority, but only once, using idle watchers to keep the event	2940	of lower priority, but only once, using idle watchers to keep the event
1855	loop from blocking if lower-priority coroutines are active, thus mapping	2941	loop from blocking if lower-priority coroutines are active, thus mapping
1856	low-priority coroutines to idle/background tasks).	2942	low-priority coroutines to idle/background tasks).
1857		2943
1858	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)	2944	When used for this purpose, it is recommended to give C<ev_check> watchers
1859	priority, to ensure that they are being run before any other watchers	2945	highest (C<EV_MAXPRI>) priority, to ensure that they are being run before
		2946	any other watchers after the poll (this doesn't matter for C<ev_prepare>
		2947	watchers).
		2948
1860	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,	2949	Also, C<ev_check> watchers (and C<ev_prepare> watchers, too) should not
1861	too) should not activate ("feed") events into libev. While libev fully	2950	activate ("feed") events into libev. While libev fully supports this, they
1862	supports this, they will be called before other C<ev_check> watchers	2951	might get executed before other C<ev_check> watchers did their job. As
1863	did their job. As C<ev_check> watchers are often used to embed other	2952	C<ev_check> watchers are often used to embed other (non-libev) event
1864	(non-libev) event loops those other event loops might be in an unusable	2953	loops those other event loops might be in an unusable state until their
1865	state until their C<ev_check> watcher ran (always remind yourself to	2954	C<ev_check> watcher ran (always remind yourself to coexist peacefully with
1866	coexist peacefully with others).	2955	others).
		2956
		2957	=head3 Abusing an C<ev_check> watcher for its side-effect
		2958
		2959	C<ev_check> (and less often also C<ev_prepare>) watchers can also be
		2960	useful because they are called once per event loop iteration. For
		2961	example, if you want to handle a large number of connections fairly, you
		2962	normally only do a bit of work for each active connection, and if there
		2963	is more work to do, you wait for the next event loop iteration, so other
		2964	connections have a chance of making progress.
		2965
		2966	Using an C<ev_check> watcher is almost enough: it will be called on the
		2967	next event loop iteration. However, that isn't as soon as possible -
		2968	without external events, your C<ev_check> watcher will not be invoked.
		2969
		2970	This is where C<ev_idle> watchers come in handy - all you need is a
		2971	single global idle watcher that is active as long as you have one active
		2972	C<ev_check> watcher. The C<ev_idle> watcher makes sure the event loop
		2973	will not sleep, and the C<ev_check> watcher makes sure a callback gets
		2974	invoked. Neither watcher alone can do that.
1867		2975
1868	=head3 Watcher-Specific Functions and Data Members	2976	=head3 Watcher-Specific Functions and Data Members
1869		2977
1870	=over 4	2978	=over 4
1871		2979
…		…
1873		2981
1874	=item ev_check_init (ev_check *, callback)	2982	=item ev_check_init (ev_check *, callback)
1875		2983
1876	Initialises and configures the prepare or check watcher - they have no	2984	Initialises and configures the prepare or check watcher - they have no
1877	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>	2985	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>
1878	macros, but using them is utterly, utterly and completely pointless.	2986	macros, but using them is utterly, utterly, utterly and completely
		2987	pointless.
1879		2988
1880	=back	2989	=back
1881		2990
1882	=head3 Examples	2991	=head3 Examples
1883		2992
1884	There are a number of principal ways to embed other event loops or modules	2993	There are a number of principal ways to embed other event loops or modules
1885	into libev. Here are some ideas on how to include libadns into libev	2994	into libev. Here are some ideas on how to include libadns into libev
1886	(there is a Perl module named C<EV::ADNS> that does this, which you could	2995	(there is a Perl module named C<EV::ADNS> that does this, which you could
1887	use for an actually working example. Another Perl module named C<EV::Glib>	2996	use as a working example. Another Perl module named C<EV::Glib> embeds a
1888	embeds a Glib main context into libev, and finally, C<Glib::EV> embeds EV	2997	Glib main context into libev, and finally, C<Glib::EV> embeds EV into the
1889	into the Glib event loop).	2998	Glib event loop).
1890		2999
1891	Method 1: Add IO watchers and a timeout watcher in a prepare handler,	3000	Method 1: Add IO watchers and a timeout watcher in a prepare handler,
1892	and in a check watcher, destroy them and call into libadns. What follows	3001	and in a check watcher, destroy them and call into libadns. What follows
1893	is pseudo-code only of course. This requires you to either use a low	3002	is pseudo-code only of course. This requires you to either use a low
1894	priority for the check watcher or use C<ev_clear_pending> explicitly, as	3003	priority for the check watcher or use C<ev_clear_pending> explicitly, as
1895	the callbacks for the IO/timeout watchers might not have been called yet.	3004	the callbacks for the IO/timeout watchers might not have been called yet.
1896		3005
1897	static ev_io iow [nfd];	3006	static ev_io iow [nfd];
1898	static ev_timer tw;	3007	static ev_timer tw;
1899		3008
1900	static void	3009	static void
1901	io_cb (ev_loop *loop, ev_io *w, int revents)	3010	io_cb (struct ev_loop *loop, ev_io *w, int revents)
1902	{	3011	{
1903	}	3012	}
1904		3013
1905	// create io watchers for each fd and a timer before blocking	3014	// create io watchers for each fd and a timer before blocking
1906	static void	3015	static void
1907	adns_prepare_cb (ev_loop *loop, ev_prepare *w, int revents)	3016	adns_prepare_cb (struct ev_loop *loop, ev_prepare *w, int revents)
1908	{	3017	{
1909	int timeout = 3600000;	3018	int timeout = 3600000;
1910	struct pollfd fds [nfd];	3019	struct pollfd fds [nfd];
1911	// actual code will need to loop here and realloc etc.	3020	// actual code will need to loop here and realloc etc.
1912	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));	3021	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
1913		3022
1914	/* the callback is illegal, but won't be called as we stop during check */	3023	/* the callback is illegal, but won't be called as we stop during check */
1915	ev_timer_init (&tw, 0, timeout * 1e-3);	3024	ev_timer_init (&tw, 0, timeout * 1e-3, 0.);
1916	ev_timer_start (loop, &tw);	3025	ev_timer_start (loop, &tw);
1917		3026
1918	// create one ev_io per pollfd	3027	// create one ev_io per pollfd
1919	for (int i = 0; i < nfd; ++i)	3028	for (int i = 0; i < nfd; ++i)
1920	{	3029	{
1921	ev_io_init (iow + i, io_cb, fds [i].fd,	3030	ev_io_init (iow + i, io_cb, fds [i].fd,
1922	((fds [i].events & POLLIN ? EV_READ : 0)	3031	((fds [i].events & POLLIN ? EV_READ : 0)
1923	| (fds [i].events & POLLOUT ? EV_WRITE : 0)));	3032	| (fds [i].events & POLLOUT ? EV_WRITE : 0)));
1924		3033
1925	fds [i].revents = 0;	3034	fds [i].revents = 0;
1926	ev_io_start (loop, iow + i);	3035	ev_io_start (loop, iow + i);
1927	}	3036	}
1928	}	3037	}
1929		3038
1930	// stop all watchers after blocking	3039	// stop all watchers after blocking
1931	static void	3040	static void
1932	adns_check_cb (ev_loop *loop, ev_check *w, int revents)	3041	adns_check_cb (struct ev_loop *loop, ev_check *w, int revents)
1933	{	3042	{
1934	ev_timer_stop (loop, &tw);	3043	ev_timer_stop (loop, &tw);
1935		3044
1936	for (int i = 0; i < nfd; ++i)	3045	for (int i = 0; i < nfd; ++i)
1937	{	3046	{
1938	// set the relevant poll flags	3047	// set the relevant poll flags
1939	// could also call adns_processreadable etc. here	3048	// could also call adns_processreadable etc. here
1940	struct pollfd *fd = fds + i;	3049	struct pollfd *fd = fds + i;
1941	int revents = ev_clear_pending (iow + i);	3050	int revents = ev_clear_pending (iow + i);
1942	if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;	3051	if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;
1943	if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;	3052	if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;
1944		3053
1945	// now stop the watcher	3054	// now stop the watcher
1946	ev_io_stop (loop, iow + i);	3055	ev_io_stop (loop, iow + i);
1947	}	3056	}
1948		3057
1949	adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));	3058	adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));
1950	}	3059	}
1951		3060
1952	Method 2: This would be just like method 1, but you run C<adns_afterpoll>	3061	Method 2: This would be just like method 1, but you run C<adns_afterpoll>
1953	in the prepare watcher and would dispose of the check watcher.	3062	in the prepare watcher and would dispose of the check watcher.
1954		3063
1955	Method 3: If the module to be embedded supports explicit event	3064	Method 3: If the module to be embedded supports explicit event
1956	notification (adns does), you can also make use of the actual watcher	3065	notification (libadns does), you can also make use of the actual watcher
1957	callbacks, and only destroy/create the watchers in the prepare watcher.	3066	callbacks, and only destroy/create the watchers in the prepare watcher.
1958		3067
1959	static void	3068	static void
1960	timer_cb (EV_P_ ev_timer *w, int revents)	3069	timer_cb (EV_P_ ev_timer *w, int revents)
1961	{	3070	{
1962	adns_state ads = (adns_state)w->data;	3071	adns_state ads = (adns_state)w->data;
1963	update_now (EV_A);	3072	update_now (EV_A);
1964		3073
1965	adns_processtimeouts (ads, &tv_now);	3074	adns_processtimeouts (ads, &tv_now);
1966	}	3075	}
1967		3076
1968	static void	3077	static void
1969	io_cb (EV_P_ ev_io *w, int revents)	3078	io_cb (EV_P_ ev_io *w, int revents)
1970	{	3079	{
1971	adns_state ads = (adns_state)w->data;	3080	adns_state ads = (adns_state)w->data;
1972	update_now (EV_A);	3081	update_now (EV_A);
1973		3082
1974	if (revents & EV_READ ) adns_processreadable (ads, w->fd, &tv_now);	3083	if (revents & EV_READ ) adns_processreadable (ads, w->fd, &tv_now);
1975	if (revents & EV_WRITE) adns_processwriteable (ads, w->fd, &tv_now);	3084	if (revents & EV_WRITE) adns_processwriteable (ads, w->fd, &tv_now);
1976	}	3085	}
1977		3086
1978	// do not ever call adns_afterpoll	3087	// do not ever call adns_afterpoll
1979		3088
1980	Method 4: Do not use a prepare or check watcher because the module you	3089	Method 4: Do not use a prepare or check watcher because the module you
1981	want to embed is too inflexible to support it. Instead, youc na override	3090	want to embed is not flexible enough to support it. Instead, you can
1982	their poll function. The drawback with this solution is that the main	3091	override their poll function. The drawback with this solution is that the
1983	loop is now no longer controllable by EV. The C<Glib::EV> module does	3092	main loop is now no longer controllable by EV. The C<Glib::EV> module uses
1984	this.	3093	this approach, effectively embedding EV as a client into the horrible
		3094	libglib event loop.
1985		3095
1986	static gint	3096	static gint
1987	event_poll_func (GPollFD *fds, guint nfds, gint timeout)	3097	event_poll_func (GPollFD *fds, guint nfds, gint timeout)
1988	{	3098	{
1989	int got_events = 0;	3099	int got_events = 0;
1990		3100
1991	for (n = 0; n < nfds; ++n)	3101	for (n = 0; n < nfds; ++n)
1992	// create/start io watcher that sets the relevant bits in fds[n] and increment got_events	3102	// create/start io watcher that sets the relevant bits in fds[n] and increment got_events
1993		3103
1994	if (timeout >= 0)	3104	if (timeout >= 0)
1995	// create/start timer	3105	// create/start timer
1996		3106
1997	// poll	3107	// poll
1998	ev_loop (EV_A_ 0);	3108	ev_run (EV_A_ 0);
1999		3109
2000	// stop timer again	3110	// stop timer again
2001	if (timeout >= 0)	3111	if (timeout >= 0)
2002	ev_timer_stop (EV_A_ &to);	3112	ev_timer_stop (EV_A_ &to);
2003		3113
2004	// stop io watchers again - their callbacks should have set	3114	// stop io watchers again - their callbacks should have set
2005	for (n = 0; n < nfds; ++n)	3115	for (n = 0; n < nfds; ++n)
2006	ev_io_stop (EV_A_ iow [n]);	3116	ev_io_stop (EV_A_ iow [n]);
2007		3117
2008	return got_events;	3118	return got_events;
2009	}	3119	}
2010		3120
2011		3121
2012	=head2 C<ev_embed> - when one backend isn't enough...	3122	=head2 C<ev_embed> - when one backend isn't enough...
2013		3123
2014	This is a rather advanced watcher type that lets you embed one event loop	3124	This is a rather advanced watcher type that lets you embed one event loop
…		…
2020	prioritise I/O.	3130	prioritise I/O.
2021		3131
2022	As an example for a bug workaround, the kqueue backend might only support	3132	As an example for a bug workaround, the kqueue backend might only support
2023	sockets on some platform, so it is unusable as generic backend, but you	3133	sockets on some platform, so it is unusable as generic backend, but you
2024	still want to make use of it because you have many sockets and it scales	3134	still want to make use of it because you have many sockets and it scales
2025	so nicely. In this case, you would create a kqueue-based loop and embed it	3135	so nicely. In this case, you would create a kqueue-based loop and embed
2026	into your default loop (which might use e.g. poll). Overall operation will	3136	it into your default loop (which might use e.g. poll). Overall operation
2027	be a bit slower because first libev has to poll and then call kevent, but	3137	will be a bit slower because first libev has to call C<poll> and then
2028	at least you can use both at what they are best.	3138	C<kevent>, but at least you can use both mechanisms for what they are
		3139	best: C<kqueue> for scalable sockets and C<poll> if you want it to work :)
2029		3140
2030	As for prioritising I/O: rarely you have the case where some fds have	3141	As for prioritising I/O: under rare circumstances you have the case where
2031	to be watched and handled very quickly (with low latency), and even	3142	some fds have to be watched and handled very quickly (with low latency),
2032	priorities and idle watchers might have too much overhead. In this case	3143	and even priorities and idle watchers might have too much overhead. In
2033	you would put all the high priority stuff in one loop and all the rest in	3144	this case you would put all the high priority stuff in one loop and all
2034	a second one, and embed the second one in the first.	3145	the rest in a second one, and embed the second one in the first.
2035		3146
2036	As long as the watcher is active, the callback will be invoked every time	3147	As long as the watcher is active, the callback will be invoked every
2037	there might be events pending in the embedded loop. The callback must then	3148	time there might be events pending in the embedded loop. The callback
2038	call C<ev_embed_sweep (mainloop, watcher)> to make a single sweep and invoke	3149	must then call C<ev_embed_sweep (mainloop, watcher)> to make a single
2039	their callbacks (you could also start an idle watcher to give the embedded	3150	sweep and invoke their callbacks (the callback doesn't need to invoke the
2040	loop strictly lower priority for example). You can also set the callback	3151	C<ev_embed_sweep> function directly, it could also start an idle watcher
2041	to C<0>, in which case the embed watcher will automatically execute the	3152	to give the embedded loop strictly lower priority for example).
2042	embedded loop sweep.
2043		3153
2044	As long as the watcher is started it will automatically handle events. The	3154	You can also set the callback to C<0>, in which case the embed watcher
2045	callback will be invoked whenever some events have been handled. You can	3155	will automatically execute the embedded loop sweep whenever necessary.
2046	set the callback to C<0> to avoid having to specify one if you are not
2047	interested in that.
2048		3156
2049	Also, there have not currently been made special provisions for forking:	3157	Fork detection will be handled transparently while the C<ev_embed> watcher
2050	when you fork, you not only have to call C<ev_loop_fork> on both loops,	3158	is active, i.e., the embedded loop will automatically be forked when the
2051	but you will also have to stop and restart any C<ev_embed> watchers	3159	embedding loop forks. In other cases, the user is responsible for calling
2052	yourself.	3160	C<ev_loop_fork> on the embedded loop.
2053		3161
2054	Unfortunately, not all backends are embeddable, only the ones returned by	3162	Unfortunately, not all backends are embeddable: only the ones returned by
2055	C<ev_embeddable_backends> are, which, unfortunately, does not include any	3163	C<ev_embeddable_backends> are, which, unfortunately, does not include any
2056	portable one.	3164	portable one.
2057		3165
2058	So when you want to use this feature you will always have to be prepared	3166	So when you want to use this feature you will always have to be prepared
2059	that you cannot get an embeddable loop. The recommended way to get around	3167	that you cannot get an embeddable loop. The recommended way to get around
2060	this is to have a separate variables for your embeddable loop, try to	3168	this is to have a separate variables for your embeddable loop, try to
2061	create it, and if that fails, use the normal loop for everything.	3169	create it, and if that fails, use the normal loop for everything.
2062		3170
		3171	=head3 C<ev_embed> and fork
		3172
		3173	While the C<ev_embed> watcher is running, forks in the embedding loop will
		3174	automatically be applied to the embedded loop as well, so no special
		3175	fork handling is required in that case. When the watcher is not running,
		3176	however, it is still the task of the libev user to call C<ev_loop_fork ()>
		3177	as applicable.
		3178
2063	=head3 Watcher-Specific Functions and Data Members	3179	=head3 Watcher-Specific Functions and Data Members
2064		3180
2065	=over 4	3181	=over 4
2066		3182
2067	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)	3183	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
2068		3184
2069	=item ev_embed_set (ev_embed *, callback, struct ev_loop *embedded_loop)	3185	=item ev_embed_set (ev_embed *, struct ev_loop *embedded_loop)
2070		3186
2071	Configures the watcher to embed the given loop, which must be	3187	Configures the watcher to embed the given loop, which must be
2072	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be	3188	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
2073	invoked automatically, otherwise it is the responsibility of the callback	3189	invoked automatically, otherwise it is the responsibility of the callback
2074	to invoke it (it will continue to be called until the sweep has been done,	3190	to invoke it (it will continue to be called until the sweep has been done,
2075	if you do not want thta, you need to temporarily stop the embed watcher).	3191	if you do not want that, you need to temporarily stop the embed watcher).
2076		3192
2077	=item ev_embed_sweep (loop, ev_embed *)	3193	=item ev_embed_sweep (loop, ev_embed *)
2078		3194
2079	Make a single, non-blocking sweep over the embedded loop. This works	3195	Make a single, non-blocking sweep over the embedded loop. This works
2080	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	3196	similarly to C<ev_run (embedded_loop, EVRUN_NOWAIT)>, but in the most
2081	apropriate way for embedded loops.	3197	appropriate way for embedded loops.
2082		3198
2083	=item struct ev_loop *other [read-only]	3199	=item struct ev_loop *other [read-only]
2084		3200
2085	The embedded event loop.	3201	The embedded event loop.
2086		3202
…		…
2088		3204
2089	=head3 Examples	3205	=head3 Examples
2090		3206
2091	Example: Try to get an embeddable event loop and embed it into the default	3207	Example: Try to get an embeddable event loop and embed it into the default
2092	event loop. If that is not possible, use the default loop. The default	3208	event loop. If that is not possible, use the default loop. The default
2093	loop is stored in C<loop_hi>, while the mebeddable loop is stored in	3209	loop is stored in C<loop_hi>, while the embeddable loop is stored in
2094	C<loop_lo> (which is C<loop_hi> in the acse no embeddable loop can be	3210	C<loop_lo> (which is C<loop_hi> in the case no embeddable loop can be
2095	used).	3211	used).
2096		3212
2097	struct ev_loop *loop_hi = ev_default_init (0);	3213	struct ev_loop *loop_hi = ev_default_init (0);
2098	struct ev_loop *loop_lo = 0;	3214	struct ev_loop *loop_lo = 0;
2099	struct ev_embed embed;	3215	ev_embed embed;
2100		3216
2101	// see if there is a chance of getting one that works	3217	// see if there is a chance of getting one that works
2102	// (remember that a flags value of 0 means autodetection)	3218	// (remember that a flags value of 0 means autodetection)
2103	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()	3219	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()
2104	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())	3220	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())
2105	: 0;	3221	: 0;
2106		3222
2107	// if we got one, then embed it, otherwise default to loop_hi	3223	// if we got one, then embed it, otherwise default to loop_hi
2108	if (loop_lo)	3224	if (loop_lo)
2109	{	3225	{
2110	ev_embed_init (&embed, 0, loop_lo);	3226	ev_embed_init (&embed, 0, loop_lo);
2111	ev_embed_start (loop_hi, &embed);	3227	ev_embed_start (loop_hi, &embed);
2112	}	3228	}
2113	else	3229	else
2114	loop_lo = loop_hi;	3230	loop_lo = loop_hi;
2115		3231
2116	Example: Check if kqueue is available but not recommended and create	3232	Example: Check if kqueue is available but not recommended and create
2117	a kqueue backend for use with sockets (which usually work with any	3233	a kqueue backend for use with sockets (which usually work with any
2118	kqueue implementation). Store the kqueue/socket-only event loop in	3234	kqueue implementation). Store the kqueue/socket-only event loop in
2119	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).	3235	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
2120		3236
2121	struct ev_loop *loop = ev_default_init (0);	3237	struct ev_loop *loop = ev_default_init (0);
2122	struct ev_loop *loop_socket = 0;	3238	struct ev_loop *loop_socket = 0;
2123	struct ev_embed embed;	3239	ev_embed embed;
2124		3240
2125	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)	3241	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
2126	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))	3242	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
2127	{	3243	{
2128	ev_embed_init (&embed, 0, loop_socket);	3244	ev_embed_init (&embed, 0, loop_socket);
2129	ev_embed_start (loop, &embed);	3245	ev_embed_start (loop, &embed);
2130	}	3246	}
2131		3247
2132	if (!loop_socket)	3248	if (!loop_socket)
2133	loop_socket = loop;	3249	loop_socket = loop;
2134		3250
2135	// now use loop_socket for all sockets, and loop for everything else	3251	// now use loop_socket for all sockets, and loop for everything else
2136		3252
2137		3253
2138	=head2 C<ev_fork> - the audacity to resume the event loop after a fork	3254	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
2139		3255
2140	Fork watchers are called when a C<fork ()> was detected (usually because	3256	Fork watchers are called when a C<fork ()> was detected (usually because
2141	whoever is a good citizen cared to tell libev about it by calling	3257	whoever is a good citizen cared to tell libev about it by calling
2142	C<ev_default_fork> or C<ev_loop_fork>). The invocation is done before the	3258	C<ev_loop_fork>). The invocation is done before the event loop blocks next
2143	event loop blocks next and before C<ev_check> watchers are being called,	3259	and before C<ev_check> watchers are being called, and only in the child
2144	and only in the child after the fork. If whoever good citizen calling	3260	after the fork. If whoever good citizen calling C<ev_default_fork> cheats
2145	C<ev_default_fork> cheats and calls it in the wrong process, the fork	3261	and calls it in the wrong process, the fork handlers will be invoked, too,
2146	handlers will be invoked, too, of course.	3262	of course.
		3263
		3264	=head3 The special problem of life after fork - how is it possible?
		3265
		3266	Most uses of C<fork()> consist of forking, then some simple calls to set
		3267	up/change the process environment, followed by a call to C<exec()>. This
		3268	sequence should be handled by libev without any problems.
		3269
		3270	This changes when the application actually wants to do event handling
		3271	in the child, or both parent in child, in effect "continuing" after the
		3272	fork.
		3273
		3274	The default mode of operation (for libev, with application help to detect
		3275	forks) is to duplicate all the state in the child, as would be expected
		3276	when I<either> the parent I<or> the child process continues.
		3277
		3278	When both processes want to continue using libev, then this is usually the
		3279	wrong result. In that case, usually one process (typically the parent) is
		3280	supposed to continue with all watchers in place as before, while the other
		3281	process typically wants to start fresh, i.e. without any active watchers.
		3282
		3283	The cleanest and most efficient way to achieve that with libev is to
		3284	simply create a new event loop, which of course will be "empty", and
		3285	use that for new watchers. This has the advantage of not touching more
		3286	memory than necessary, and thus avoiding the copy-on-write, and the
		3287	disadvantage of having to use multiple event loops (which do not support
		3288	signal watchers).
		3289
		3290	When this is not possible, or you want to use the default loop for
		3291	other reasons, then in the process that wants to start "fresh", call
		3292	C<ev_loop_destroy (EV_DEFAULT)> followed by C<ev_default_loop (...)>.
		3293	Destroying the default loop will "orphan" (not stop) all registered
		3294	watchers, so you have to be careful not to execute code that modifies
		3295	those watchers. Note also that in that case, you have to re-register any
		3296	signal watchers.
2147		3297
2148	=head3 Watcher-Specific Functions and Data Members	3298	=head3 Watcher-Specific Functions and Data Members
2149		3299
2150	=over 4	3300	=over 4
2151		3301
2152	=item ev_fork_init (ev_signal *, callback)	3302	=item ev_fork_init (ev_fork *, callback)
2153		3303
2154	Initialises and configures the fork watcher - it has no parameters of any	3304	Initialises and configures the fork watcher - it has no parameters of any
2155	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	3305	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
2156	believe me.	3306	really.
2157		3307
2158	=back	3308	=back
2159		3309
2160		3310
		3311	=head2 C<ev_cleanup> - even the best things end
		3312
		3313	Cleanup watchers are called just before the event loop is being destroyed
		3314	by a call to C<ev_loop_destroy>.
		3315
		3316	While there is no guarantee that the event loop gets destroyed, cleanup
		3317	watchers provide a convenient method to install cleanup hooks for your
		3318	program, worker threads and so on - you just to make sure to destroy the
		3319	loop when you want them to be invoked.
		3320
		3321	Cleanup watchers are invoked in the same way as any other watcher. Unlike
		3322	all other watchers, they do not keep a reference to the event loop (which
		3323	makes a lot of sense if you think about it). Like all other watchers, you
		3324	can call libev functions in the callback, except C<ev_cleanup_start>.
		3325
		3326	=head3 Watcher-Specific Functions and Data Members
		3327
		3328	=over 4
		3329
		3330	=item ev_cleanup_init (ev_cleanup *, callback)
		3331
		3332	Initialises and configures the cleanup watcher - it has no parameters of
		3333	any kind. There is a C<ev_cleanup_set> macro, but using it is utterly
		3334	pointless, I assure you.
		3335
		3336	=back
		3337
		3338	Example: Register an atexit handler to destroy the default loop, so any
		3339	cleanup functions are called.
		3340
		3341	static void
		3342	program_exits (void)
		3343	{
		3344	ev_loop_destroy (EV_DEFAULT_UC);
		3345	}
		3346
		3347	...
		3348	atexit (program_exits);
		3349
		3350
2161	=head2 C<ev_async> - how to wake up another event loop	3351	=head2 C<ev_async> - how to wake up an event loop
2162		3352
2163	In general, you cannot use an C<ev_loop> from multiple threads or other	3353	In general, you cannot use an C<ev_loop> from multiple threads or other
2164	asynchronous sources such as signal handlers (as opposed to multiple event	3354	asynchronous sources such as signal handlers (as opposed to multiple event
2165	loops - those are of course safe to use in different threads).	3355	loops - those are of course safe to use in different threads).
2166		3356
2167	Sometimes, however, you need to wake up another event loop you do not	3357	Sometimes, however, you need to wake up an event loop you do not control,
2168	control, for example because it belongs to another thread. This is what	3358	for example because it belongs to another thread. This is what C<ev_async>
2169	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you	3359	watchers do: as long as the C<ev_async> watcher is active, you can signal
2170	can signal it by calling C<ev_async_send>, which is thread- and signal	3360	it by calling C<ev_async_send>, which is thread- and signal safe.
2171	safe.
2172		3361
2173	This functionality is very similar to C<ev_signal> watchers, as signals,	3362	This functionality is very similar to C<ev_signal> watchers, as signals,
2174	too, are asynchronous in nature, and signals, too, will be compressed	3363	too, are asynchronous in nature, and signals, too, will be compressed
2175	(i.e. the number of callback invocations may be less than the number of	3364	(i.e. the number of callback invocations may be less than the number of
2176	C<ev_async_sent> calls).	3365	C<ev_async_send> calls). In fact, you could use signal watchers as a kind
2177		3366	of "global async watchers" by using a watcher on an otherwise unused
2178	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not	3367	signal, and C<ev_feed_signal> to signal this watcher from another thread,
2179	just the default loop.	3368	even without knowing which loop owns the signal.
2180		3369
2181	=head3 Queueing	3370	=head3 Queueing
2182		3371
2183	C<ev_async> does not support queueing of data in any way. The reason	3372	C<ev_async> does not support queueing of data in any way. The reason
2184	is that the author does not know of a simple (or any) algorithm for a	3373	is that the author does not know of a simple (or any) algorithm for a
2185	multiple-writer-single-reader queue that works in all cases and doesn't	3374	multiple-writer-single-reader queue that works in all cases and doesn't
2186	need elaborate support such as pthreads.	3375	need elaborate support such as pthreads or unportable memory access
		3376	semantics.
2187		3377
2188	That means that if you want to queue data, you have to provide your own	3378	That means that if you want to queue data, you have to provide your own
2189	queue. But at least I can tell you would implement locking around your	3379	queue. But at least I can tell you how to implement locking around your
2190	queue:	3380	queue:
2191		3381
2192	=over 4	3382	=over 4
2193		3383
2194	=item queueing from a signal handler context	3384	=item queueing from a signal handler context
2195		3385
2196	To implement race-free queueing, you simply add to the queue in the signal	3386	To implement race-free queueing, you simply add to the queue in the signal
2197	handler but you block the signal handler in the watcher callback. Here is an example that does that for	3387	handler but you block the signal handler in the watcher callback. Here is
2198	some fictitiuous SIGUSR1 handler:	3388	an example that does that for some fictitious SIGUSR1 handler:
2199		3389
2200	static ev_async mysig;	3390	static ev_async mysig;
2201		3391
2202	static void	3392	static void
2203	sigusr1_handler (void)	3393	sigusr1_handler (void)
…		…
2269	=over 4	3459	=over 4
2270		3460
2271	=item ev_async_init (ev_async *, callback)	3461	=item ev_async_init (ev_async *, callback)
2272		3462
2273	Initialises and configures the async watcher - it has no parameters of any	3463	Initialises and configures the async watcher - it has no parameters of any
2274	kind. There is a C<ev_asynd_set> macro, but using it is utterly pointless,	3464	kind. There is a C<ev_async_set> macro, but using it is utterly pointless,
2275	believe me.	3465	trust me.
2276		3466
2277	=item ev_async_send (loop, ev_async *)	3467	=item ev_async_send (loop, ev_async *)
2278		3468
2279	Sends/signals/activates the given C<ev_async> watcher, that is, feeds	3469	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
2280	an C<EV_ASYNC> event on the watcher into the event loop. Unlike	3470	an C<EV_ASYNC> event on the watcher into the event loop, and instantly
		3471	returns.
		3472
2281	C<ev_feed_event>, this call is safe to do in other threads, signal or	3473	Unlike C<ev_feed_event>, this call is safe to do from other threads,
2282	similar contexts (see the dicusssion of C<EV_ATOMIC_T> in the embedding	3474	signal or similar contexts (see the discussion of C<EV_ATOMIC_T> in the
2283	section below on what exactly this means).	3475	embedding section below on what exactly this means).
2284		3476
2285	This call incurs the overhead of a syscall only once per loop iteration,	3477	Note that, as with other watchers in libev, multiple events might get
2286	so while the overhead might be noticable, it doesn't apply to repeated	3478	compressed into a single callback invocation (another way to look at
2287	calls to C<ev_async_send>.	3479	this is that C<ev_async> watchers are level-triggered: they are set on
		3480	C<ev_async_send>, reset when the event loop detects that).
		3481
		3482	This call incurs the overhead of at most one extra system call per event
		3483	loop iteration, if the event loop is blocked, and no syscall at all if
		3484	the event loop (or your program) is processing events. That means that
		3485	repeated calls are basically free (there is no need to avoid calls for
		3486	performance reasons) and that the overhead becomes smaller (typically
		3487	zero) under load.
2288		3488
2289	=item bool = ev_async_pending (ev_async *)	3489	=item bool = ev_async_pending (ev_async *)
2290		3490
2291	Returns a non-zero value when C<ev_async_send> has been called on the	3491	Returns a non-zero value when C<ev_async_send> has been called on the
2292	watcher but the event has not yet been processed (or even noted) by the	3492	watcher but the event has not yet been processed (or even noted) by the
2293	event loop.	3493	event loop.
2294		3494
2295	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When	3495	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When
2296	the loop iterates next and checks for the watcher to have become active,	3496	the loop iterates next and checks for the watcher to have become active,
2297	it will reset the flag again. C<ev_async_pending> can be used to very	3497	it will reset the flag again. C<ev_async_pending> can be used to very
2298	quickly check wether invoking the loop might be a good idea.	3498	quickly check whether invoking the loop might be a good idea.
2299		3499
2300	Not that this does I<not> check wether the watcher itself is pending, only	3500	Not that this does I<not> check whether the watcher itself is pending,
2301	wether it has been requested to make this watcher pending.	3501	only whether it has been requested to make this watcher pending: there
		3502	is a time window between the event loop checking and resetting the async
		3503	notification, and the callback being invoked.
2302		3504
2303	=back	3505	=back
2304		3506
2305		3507
2306	=head1 OTHER FUNCTIONS	3508	=head1 OTHER FUNCTIONS
…		…
2310	=over 4	3512	=over 4
2311		3513
2312	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback)	3514	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback)
2313		3515
2314	This function combines a simple timer and an I/O watcher, calls your	3516	This function combines a simple timer and an I/O watcher, calls your
2315	callback on whichever event happens first and automatically stop both	3517	callback on whichever event happens first and automatically stops both
2316	watchers. This is useful if you want to wait for a single event on an fd	3518	watchers. This is useful if you want to wait for a single event on an fd
2317	or timeout without having to allocate/configure/start/stop/free one or	3519	or timeout without having to allocate/configure/start/stop/free one or
2318	more watchers yourself.	3520	more watchers yourself.
2319		3521
2320	If C<fd> is less than 0, then no I/O watcher will be started and events	3522	If C<fd> is less than 0, then no I/O watcher will be started and the
2321	is being ignored. Otherwise, an C<ev_io> watcher for the given C<fd> and	3523	C<events> argument is being ignored. Otherwise, an C<ev_io> watcher for
2322	C<events> set will be craeted and started.	3524	the given C<fd> and C<events> set will be created and started.
2323		3525
2324	If C<timeout> is less than 0, then no timeout watcher will be	3526	If C<timeout> is less than 0, then no timeout watcher will be
2325	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and	3527	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
2326	repeat = 0) will be started. While C<0> is a valid timeout, it is of	3528	repeat = 0) will be started. C<0> is a valid timeout.
2327	dubious value.
2328		3529
2329	The callback has the type C<void (*cb)(int revents, void *arg)> and gets	3530	The callback has the type C<void (*cb)(int revents, void *arg)> and is
2330	passed an C<revents> set like normal event callbacks (a combination of	3531	passed an C<revents> set like normal event callbacks (a combination of
2331	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>	3532	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMER>) and the C<arg>
2332	value passed to C<ev_once>:	3533	value passed to C<ev_once>. Note that it is possible to receive I<both>
		3534	a timeout and an io event at the same time - you probably should give io
		3535	events precedence.
2333		3536
		3537	Example: wait up to ten seconds for data to appear on STDIN_FILENO.
		3538
2334	static void stdin_ready (int revents, void *arg)	3539	static void stdin_ready (int revents, void *arg)
		3540	{
		3541	if (revents & EV_READ)
		3542	/* stdin might have data for us, joy! */;
		3543	else if (revents & EV_TIMER)
		3544	/* doh, nothing entered */;
		3545	}
		3546
		3547	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
		3548
		3549	=item ev_feed_fd_event (loop, int fd, int revents)
		3550
		3551	Feed an event on the given fd, as if a file descriptor backend detected
		3552	the given events.
		3553
		3554	=item ev_feed_signal_event (loop, int signum)
		3555
		3556	Feed an event as if the given signal occurred. See also C<ev_feed_signal>,
		3557	which is async-safe.
		3558
		3559	=back
		3560
		3561
		3562	=head1 COMMON OR USEFUL IDIOMS (OR BOTH)
		3563
		3564	This section explains some common idioms that are not immediately
		3565	obvious. Note that examples are sprinkled over the whole manual, and this
		3566	section only contains stuff that wouldn't fit anywhere else.
		3567
		3568	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
		3569
		3570	Each watcher has, by default, a C<void *data> member that you can read
		3571	or modify at any time: libev will completely ignore it. This can be used
		3572	to associate arbitrary data with your watcher. If you need more data and
		3573	don't want to allocate memory separately and store a pointer to it in that
		3574	data member, you can also "subclass" the watcher type and provide your own
		3575	data:
		3576
		3577	struct my_io
		3578	{
		3579	ev_io io;
		3580	int otherfd;
		3581	void *somedata;
		3582	struct whatever *mostinteresting;
		3583	};
		3584
		3585	...
		3586	struct my_io w;
		3587	ev_io_init (&w.io, my_cb, fd, EV_READ);
		3588
		3589	And since your callback will be called with a pointer to the watcher, you
		3590	can cast it back to your own type:
		3591
		3592	static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)
		3593	{
		3594	struct my_io *w = (struct my_io *)w_;
		3595	...
		3596	}
		3597
		3598	More interesting and less C-conformant ways of casting your callback
		3599	function type instead have been omitted.
		3600
		3601	=head2 BUILDING YOUR OWN COMPOSITE WATCHERS
		3602
		3603	Another common scenario is to use some data structure with multiple
		3604	embedded watchers, in effect creating your own watcher that combines
		3605	multiple libev event sources into one "super-watcher":
		3606
		3607	struct my_biggy
		3608	{
		3609	int some_data;
		3610	ev_timer t1;
		3611	ev_timer t2;
		3612	}
		3613
		3614	In this case getting the pointer to C<my_biggy> is a bit more
		3615	complicated: Either you store the address of your C<my_biggy> struct in
		3616	the C<data> member of the watcher (for woozies or C++ coders), or you need
		3617	to use some pointer arithmetic using C<offsetof> inside your watchers (for
		3618	real programmers):
		3619
		3620	#include <stddef.h>
		3621
		3622	static void
		3623	t1_cb (EV_P_ ev_timer *w, int revents)
		3624	{
		3625	struct my_biggy big = (struct my_biggy *)
		3626	(((char *)w) - offsetof (struct my_biggy, t1));
		3627	}
		3628
		3629	static void
		3630	t2_cb (EV_P_ ev_timer *w, int revents)
		3631	{
		3632	struct my_biggy big = (struct my_biggy *)
		3633	(((char *)w) - offsetof (struct my_biggy, t2));
		3634	}
		3635
		3636	=head2 AVOIDING FINISHING BEFORE RETURNING
		3637
		3638	Often you have structures like this in event-based programs:
		3639
		3640	callback ()
2335	{	3641	{
2336	if (revents & EV_TIMEOUT)	3642	free (request);
2337	/* doh, nothing entered */;
2338	else if (revents & EV_READ)
2339	/* stdin might have data for us, joy! */;
2340	}	3643	}
2341		3644
2342	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	3645	request = start_new_request (..., callback);
2343		3646
2344	=item ev_feed_event (ev_loop *, watcher *, int revents)	3647	The intent is to start some "lengthy" operation. The C<request> could be
		3648	used to cancel the operation, or do other things with it.
2345		3649
2346	Feeds the given event set into the event loop, as if the specified event	3650	It's not uncommon to have code paths in C<start_new_request> that
2347	had happened for the specified watcher (which must be a pointer to an	3651	immediately invoke the callback, for example, to report errors. Or you add
2348	initialised but not necessarily started event watcher).	3652	some caching layer that finds that it can skip the lengthy aspects of the
		3653	operation and simply invoke the callback with the result.
2349		3654
2350	=item ev_feed_fd_event (ev_loop *, int fd, int revents)	3655	The problem here is that this will happen I<before> C<start_new_request>
		3656	has returned, so C<request> is not set.
2351		3657
2352	Feed an event on the given fd, as if a file descriptor backend detected	3658	Even if you pass the request by some safer means to the callback, you
2353	the given events it.	3659	might want to do something to the request after starting it, such as
		3660	canceling it, which probably isn't working so well when the callback has
		3661	already been invoked.
2354		3662
2355	=item ev_feed_signal_event (ev_loop *loop, int signum)	3663	A common way around all these issues is to make sure that
		3664	C<start_new_request> I<always> returns before the callback is invoked. If
		3665	C<start_new_request> immediately knows the result, it can artificially
		3666	delay invoking the callback by using a C<prepare> or C<idle> watcher for
		3667	example, or more sneakily, by reusing an existing (stopped) watcher and
		3668	pushing it into the pending queue:
2356		3669
2357	Feed an event as if the given signal occured (C<loop> must be the default	3670	ev_set_cb (watcher, callback);
2358	loop!).	3671	ev_feed_event (EV_A_ watcher, 0);
2359		3672
2360	=back	3673	This way, C<start_new_request> can safely return before the callback is
		3674	invoked, while not delaying callback invocation too much.
		3675
		3676	=head2 MODEL/NESTED EVENT LOOP INVOCATIONS AND EXIT CONDITIONS
		3677
		3678	Often (especially in GUI toolkits) there are places where you have
		3679	I<modal> interaction, which is most easily implemented by recursively
		3680	invoking C<ev_run>.
		3681
		3682	This brings the problem of exiting - a callback might want to finish the
		3683	main C<ev_run> call, but not the nested one (e.g. user clicked "Quit", but
		3684	a modal "Are you sure?" dialog is still waiting), or just the nested one
		3685	and not the main one (e.g. user clocked "Ok" in a modal dialog), or some
		3686	other combination: In these cases, a simple C<ev_break> will not work.
		3687
		3688	The solution is to maintain "break this loop" variable for each C<ev_run>
		3689	invocation, and use a loop around C<ev_run> until the condition is
		3690	triggered, using C<EVRUN_ONCE>:
		3691
		3692	// main loop
		3693	int exit_main_loop = 0;
		3694
		3695	while (!exit_main_loop)
		3696	ev_run (EV_DEFAULT_ EVRUN_ONCE);
		3697
		3698	// in a modal watcher
		3699	int exit_nested_loop = 0;
		3700
		3701	while (!exit_nested_loop)
		3702	ev_run (EV_A_ EVRUN_ONCE);
		3703
		3704	To exit from any of these loops, just set the corresponding exit variable:
		3705
		3706	// exit modal loop
		3707	exit_nested_loop = 1;
		3708
		3709	// exit main program, after modal loop is finished
		3710	exit_main_loop = 1;
		3711
		3712	// exit both
		3713	exit_main_loop = exit_nested_loop = 1;
		3714
		3715	=head2 THREAD LOCKING EXAMPLE
		3716
		3717	Here is a fictitious example of how to run an event loop in a different
		3718	thread from where callbacks are being invoked and watchers are
		3719	created/added/removed.
		3720
		3721	For a real-world example, see the C<EV::Loop::Async> perl module,
		3722	which uses exactly this technique (which is suited for many high-level
		3723	languages).
		3724
		3725	The example uses a pthread mutex to protect the loop data, a condition
		3726	variable to wait for callback invocations, an async watcher to notify the
		3727	event loop thread and an unspecified mechanism to wake up the main thread.
		3728
		3729	First, you need to associate some data with the event loop:
		3730
		3731	typedef struct {
		3732	mutex_t lock; /* global loop lock */
		3733	ev_async async_w;
		3734	thread_t tid;
		3735	cond_t invoke_cv;
		3736	} userdata;
		3737
		3738	void prepare_loop (EV_P)
		3739	{
		3740	// for simplicity, we use a static userdata struct.
		3741	static userdata u;
		3742
		3743	ev_async_init (&u->async_w, async_cb);
		3744	ev_async_start (EV_A_ &u->async_w);
		3745
		3746	pthread_mutex_init (&u->lock, 0);
		3747	pthread_cond_init (&u->invoke_cv, 0);
		3748
		3749	// now associate this with the loop
		3750	ev_set_userdata (EV_A_ u);
		3751	ev_set_invoke_pending_cb (EV_A_ l_invoke);
		3752	ev_set_loop_release_cb (EV_A_ l_release, l_acquire);
		3753
		3754	// then create the thread running ev_run
		3755	pthread_create (&u->tid, 0, l_run, EV_A);
		3756	}
		3757
		3758	The callback for the C<ev_async> watcher does nothing: the watcher is used
		3759	solely to wake up the event loop so it takes notice of any new watchers
		3760	that might have been added:
		3761
		3762	static void
		3763	async_cb (EV_P_ ev_async *w, int revents)
		3764	{
		3765	// just used for the side effects
		3766	}
		3767
		3768	The C<l_release> and C<l_acquire> callbacks simply unlock/lock the mutex
		3769	protecting the loop data, respectively.
		3770
		3771	static void
		3772	l_release (EV_P)
		3773	{
		3774	userdata *u = ev_userdata (EV_A);
		3775	pthread_mutex_unlock (&u->lock);
		3776	}
		3777
		3778	static void
		3779	l_acquire (EV_P)
		3780	{
		3781	userdata *u = ev_userdata (EV_A);
		3782	pthread_mutex_lock (&u->lock);
		3783	}
		3784
		3785	The event loop thread first acquires the mutex, and then jumps straight
		3786	into C<ev_run>:
		3787
		3788	void *
		3789	l_run (void *thr_arg)
		3790	{
		3791	struct ev_loop *loop = (struct ev_loop *)thr_arg;
		3792
		3793	l_acquire (EV_A);
		3794	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
		3795	ev_run (EV_A_ 0);
		3796	l_release (EV_A);
		3797
		3798	return 0;
		3799	}
		3800
		3801	Instead of invoking all pending watchers, the C<l_invoke> callback will
		3802	signal the main thread via some unspecified mechanism (signals? pipe
		3803	writes? C<Async::Interrupt>?) and then waits until all pending watchers
		3804	have been called (in a while loop because a) spurious wakeups are possible
		3805	and b) skipping inter-thread-communication when there are no pending
		3806	watchers is very beneficial):
		3807
		3808	static void
		3809	l_invoke (EV_P)
		3810	{
		3811	userdata *u = ev_userdata (EV_A);
		3812
		3813	while (ev_pending_count (EV_A))
		3814	{
		3815	wake_up_other_thread_in_some_magic_or_not_so_magic_way ();
		3816	pthread_cond_wait (&u->invoke_cv, &u->lock);
		3817	}
		3818	}
		3819
		3820	Now, whenever the main thread gets told to invoke pending watchers, it
		3821	will grab the lock, call C<ev_invoke_pending> and then signal the loop
		3822	thread to continue:
		3823
		3824	static void
		3825	real_invoke_pending (EV_P)
		3826	{
		3827	userdata *u = ev_userdata (EV_A);
		3828
		3829	pthread_mutex_lock (&u->lock);
		3830	ev_invoke_pending (EV_A);
		3831	pthread_cond_signal (&u->invoke_cv);
		3832	pthread_mutex_unlock (&u->lock);
		3833	}
		3834
		3835	Whenever you want to start/stop a watcher or do other modifications to an
		3836	event loop, you will now have to lock:
		3837
		3838	ev_timer timeout_watcher;
		3839	userdata *u = ev_userdata (EV_A);
		3840
		3841	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
		3842
		3843	pthread_mutex_lock (&u->lock);
		3844	ev_timer_start (EV_A_ &timeout_watcher);
		3845	ev_async_send (EV_A_ &u->async_w);
		3846	pthread_mutex_unlock (&u->lock);
		3847
		3848	Note that sending the C<ev_async> watcher is required because otherwise
		3849	an event loop currently blocking in the kernel will have no knowledge
		3850	about the newly added timer. By waking up the loop it will pick up any new
		3851	watchers in the next event loop iteration.
		3852
		3853	=head2 THREADS, COROUTINES, CONTINUATIONS, QUEUES... INSTEAD OF CALLBACKS
		3854
		3855	While the overhead of a callback that e.g. schedules a thread is small, it
		3856	is still an overhead. If you embed libev, and your main usage is with some
		3857	kind of threads or coroutines, you might want to customise libev so that
		3858	doesn't need callbacks anymore.
		3859
		3860	Imagine you have coroutines that you can switch to using a function
		3861	C<switch_to (coro)>, that libev runs in a coroutine called C<libev_coro>
		3862	and that due to some magic, the currently active coroutine is stored in a
		3863	global called C<current_coro>. Then you can build your own "wait for libev
		3864	event" primitive by changing C<EV_CB_DECLARE> and C<EV_CB_INVOKE> (note
		3865	the differing C<;> conventions):
		3866
		3867	#define EV_CB_DECLARE(type) struct my_coro *cb;
		3868	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)
		3869
		3870	That means instead of having a C callback function, you store the
		3871	coroutine to switch to in each watcher, and instead of having libev call
		3872	your callback, you instead have it switch to that coroutine.
		3873
		3874	A coroutine might now wait for an event with a function called
		3875	C<wait_for_event>. (the watcher needs to be started, as always, but it doesn't
		3876	matter when, or whether the watcher is active or not when this function is
		3877	called):
		3878
		3879	void
		3880	wait_for_event (ev_watcher *w)
		3881	{
		3882	ev_set_cb (w, current_coro);
		3883	switch_to (libev_coro);
		3884	}
		3885
		3886	That basically suspends the coroutine inside C<wait_for_event> and
		3887	continues the libev coroutine, which, when appropriate, switches back to
		3888	this or any other coroutine.
		3889
		3890	You can do similar tricks if you have, say, threads with an event queue -
		3891	instead of storing a coroutine, you store the queue object and instead of
		3892	switching to a coroutine, you push the watcher onto the queue and notify
		3893	any waiters.
		3894
		3895	To embed libev, see L</EMBEDDING>, but in short, it's easiest to create two
		3896	files, F<my_ev.h> and F<my_ev.c> that include the respective libev files:
		3897
		3898	// my_ev.h
		3899	#define EV_CB_DECLARE(type) struct my_coro *cb;
		3900	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb);
		3901	#include "../libev/ev.h"
		3902
		3903	// my_ev.c
		3904	#define EV_H "my_ev.h"
		3905	#include "../libev/ev.c"
		3906
		3907	And then use F<my_ev.h> when you would normally use F<ev.h>, and compile
		3908	F<my_ev.c> into your project. When properly specifying include paths, you
		3909	can even use F<ev.h> as header file name directly.
2361		3910
2362		3911
2363	=head1 LIBEVENT EMULATION	3912	=head1 LIBEVENT EMULATION
2364		3913
2365	Libev offers a compatibility emulation layer for libevent. It cannot	3914	Libev offers a compatibility emulation layer for libevent. It cannot
2366	emulate the internals of libevent, so here are some usage hints:	3915	emulate the internals of libevent, so here are some usage hints:
2367		3916
2368	=over 4	3917	=over 4
		3918
		3919	=item * Only the libevent-1.4.1-beta API is being emulated.
		3920
		3921	This was the newest libevent version available when libev was implemented,
		3922	and is still mostly unchanged in 2010.
2369		3923
2370	=item * Use it by including <event.h>, as usual.	3924	=item * Use it by including <event.h>, as usual.
2371		3925
2372	=item * The following members are fully supported: ev_base, ev_callback,	3926	=item * The following members are fully supported: ev_base, ev_callback,
2373	ev_arg, ev_fd, ev_res, ev_events.	3927	ev_arg, ev_fd, ev_res, ev_events.
…		…
2379	=item * Priorities are not currently supported. Initialising priorities	3933	=item * Priorities are not currently supported. Initialising priorities
2380	will fail and all watchers will have the same priority, even though there	3934	will fail and all watchers will have the same priority, even though there
2381	is an ev_pri field.	3935	is an ev_pri field.
2382		3936
2383	=item * In libevent, the last base created gets the signals, in libev, the	3937	=item * In libevent, the last base created gets the signals, in libev, the
2384	first base created (== the default loop) gets the signals.	3938	base that registered the signal gets the signals.
2385		3939
2386	=item * Other members are not supported.	3940	=item * Other members are not supported.
2387		3941
2388	=item * The libev emulation is I<not> ABI compatible to libevent, you need	3942	=item * The libev emulation is I<not> ABI compatible to libevent, you need
2389	to use the libev header file and library.	3943	to use the libev header file and library.
2390		3944
2391	=back	3945	=back
2392		3946
2393	=head1 C++ SUPPORT	3947	=head1 C++ SUPPORT
2394		3948
		3949	=head2 C API
		3950
		3951	The normal C API should work fine when used from C++: both ev.h and the
		3952	libev sources can be compiled as C++. Therefore, code that uses the C API
		3953	will work fine.
		3954
		3955	Proper exception specifications might have to be added to callbacks passed
		3956	to libev: exceptions may be thrown only from watcher callbacks, all
		3957	other callbacks (allocator, syserr, loop acquire/release and periodic
		3958	reschedule callbacks) must not throw exceptions, and might need a C<throw
		3959	()> specification. If you have code that needs to be compiled as both C
		3960	and C++ you can use the C<EV_THROW> macro for this:
		3961
		3962	static void
		3963	fatal_error (const char *msg) EV_THROW
		3964	{
		3965	perror (msg);
		3966	abort ();
		3967	}
		3968
		3969	...
		3970	ev_set_syserr_cb (fatal_error);
		3971
		3972	The only API functions that can currently throw exceptions are C<ev_run>,
		3973	C<ev_invoke>, C<ev_invoke_pending> and C<ev_loop_destroy> (the latter
		3974	because it runs cleanup watchers).
		3975
		3976	Throwing exceptions in watcher callbacks is only supported if libev itself
		3977	is compiled with a C++ compiler or your C and C++ environments allow
		3978	throwing exceptions through C libraries (most do).
		3979
		3980	=head2 C++ API
		3981
2395	Libev comes with some simplistic wrapper classes for C++ that mainly allow	3982	Libev comes with some simplistic wrapper classes for C++ that mainly allow
2396	you to use some convinience methods to start/stop watchers and also change	3983	you to use some convenience methods to start/stop watchers and also change
2397	the callback model to a model using method callbacks on objects.	3984	the callback model to a model using method callbacks on objects.
2398		3985
2399	To use it,	3986	To use it,
2400		3987
2401	#include <ev++.h>	3988	#include <ev++.h>
2402		3989
2403	This automatically includes F<ev.h> and puts all of its definitions (many	3990	This automatically includes F<ev.h> and puts all of its definitions (many
2404	of them macros) into the global namespace. All C++ specific things are	3991	of them macros) into the global namespace. All C++ specific things are
2405	put into the C<ev> namespace. It should support all the same embedding	3992	put into the C<ev> namespace. It should support all the same embedding
2406	options as F<ev.h>, most notably C<EV_MULTIPLICITY>.	3993	options as F<ev.h>, most notably C<EV_MULTIPLICITY>.
…		…
2408	Care has been taken to keep the overhead low. The only data member the C++	3995	Care has been taken to keep the overhead low. The only data member the C++
2409	classes add (compared to plain C-style watchers) is the event loop pointer	3996	classes add (compared to plain C-style watchers) is the event loop pointer
2410	that the watcher is associated with (or no additional members at all if	3997	that the watcher is associated with (or no additional members at all if
2411	you disable C<EV_MULTIPLICITY> when embedding libev).	3998	you disable C<EV_MULTIPLICITY> when embedding libev).
2412		3999
2413	Currently, functions, and static and non-static member functions can be	4000	Currently, functions, static and non-static member functions and classes
2414	used as callbacks. Other types should be easy to add as long as they only	4001	with C<operator ()> can be used as callbacks. Other types should be easy
2415	need one additional pointer for context. If you need support for other	4002	to add as long as they only need one additional pointer for context. If
2416	types of functors please contact the author (preferably after implementing	4003	you need support for other types of functors please contact the author
2417	it).	4004	(preferably after implementing it).
		4005
		4006	For all this to work, your C++ compiler either has to use the same calling
		4007	conventions as your C compiler (for static member functions), or you have
		4008	to embed libev and compile libev itself as C++.
2418		4009
2419	Here is a list of things available in the C<ev> namespace:	4010	Here is a list of things available in the C<ev> namespace:
2420		4011
2421	=over 4	4012	=over 4
2422		4013
…		…
2432	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.	4023	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.
2433		4024
2434	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of	4025	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of
2435	the same name in the C<ev> namespace, with the exception of C<ev_signal>	4026	the same name in the C<ev> namespace, with the exception of C<ev_signal>
2436	which is called C<ev::sig> to avoid clashes with the C<signal> macro	4027	which is called C<ev::sig> to avoid clashes with the C<signal> macro
2437	defines by many implementations.	4028	defined by many implementations.
2438		4029
2439	All of those classes have these methods:	4030	All of those classes have these methods:
2440		4031
2441	=over 4	4032	=over 4
2442		4033
2443	=item ev::TYPE::TYPE ()	4034	=item ev::TYPE::TYPE ()
2444		4035
2445	=item ev::TYPE::TYPE (struct ev_loop *)	4036	=item ev::TYPE::TYPE (loop)
2446		4037
2447	=item ev::TYPE::~TYPE	4038	=item ev::TYPE::~TYPE
2448		4039
2449	The constructor (optionally) takes an event loop to associate the watcher	4040	The constructor (optionally) takes an event loop to associate the watcher
2450	with. If it is omitted, it will use C<EV_DEFAULT>.	4041	with. If it is omitted, it will use C<EV_DEFAULT>.
…		…
2473	your compiler is good :), then the method will be fully inlined into the	4064	your compiler is good :), then the method will be fully inlined into the
2474	thunking function, making it as fast as a direct C callback.	4065	thunking function, making it as fast as a direct C callback.
2475		4066
2476	Example: simple class declaration and watcher initialisation	4067	Example: simple class declaration and watcher initialisation
2477		4068
2478	struct myclass	4069	struct myclass
2479	{	4070	{
2480	void io_cb (ev::io &w, int revents) { }	4071	void io_cb (ev::io &w, int revents) { }
2481	}	4072	}
2482		4073
2483	myclass obj;	4074	myclass obj;
2484	ev::io iow;	4075	ev::io iow;
2485	iow.set <myclass, &myclass::io_cb> (&obj);	4076	iow.set <myclass, &myclass::io_cb> (&obj);
		4077
		4078	=item w->set (object *)
		4079
		4080	This is a variation of a method callback - leaving out the method to call
		4081	will default the method to C<operator ()>, which makes it possible to use
		4082	functor objects without having to manually specify the C<operator ()> all
		4083	the time. Incidentally, you can then also leave out the template argument
		4084	list.
		4085
		4086	The C<operator ()> method prototype must be C<void operator ()(watcher &w,
		4087	int revents)>.
		4088
		4089	See the method-C<set> above for more details.
		4090
		4091	Example: use a functor object as callback.
		4092
		4093	struct myfunctor
		4094	{
		4095	void operator() (ev::io &w, int revents)
		4096	{
		4097	...
		4098	}
		4099	}
		4100
		4101	myfunctor f;
		4102
		4103	ev::io w;
		4104	w.set (&f);
2486		4105
2487	=item w->set<function> (void *data = 0)	4106	=item w->set<function> (void *data = 0)
2488		4107
2489	Also sets a callback, but uses a static method or plain function as	4108	Also sets a callback, but uses a static method or plain function as
2490	callback. The optional C<data> argument will be stored in the watcher's	4109	callback. The optional C<data> argument will be stored in the watcher's
…		…
2492		4111
2493	The prototype of the C<function> must be C<void (*)(ev::TYPE &w, int)>.	4112	The prototype of the C<function> must be C<void (*)(ev::TYPE &w, int)>.
2494		4113
2495	See the method-C<set> above for more details.	4114	See the method-C<set> above for more details.
2496		4115
2497	Example:	4116	Example: Use a plain function as callback.
2498		4117
2499	static void io_cb (ev::io &w, int revents) { }	4118	static void io_cb (ev::io &w, int revents) { }
2500	iow.set <io_cb> ();	4119	iow.set <io_cb> ();
2501		4120
2502	=item w->set (struct ev_loop *)	4121	=item w->set (loop)
2503		4122
2504	Associates a different C<struct ev_loop> with this watcher. You can only	4123	Associates a different C<struct ev_loop> with this watcher. You can only
2505	do this when the watcher is inactive (and not pending either).	4124	do this when the watcher is inactive (and not pending either).
2506		4125
2507	=item w->set ([args])	4126	=item w->set ([arguments])
2508		4127
2509	Basically the same as C<ev_TYPE_set>, with the same args. Must be	4128	Basically the same as C<ev_TYPE_set> (except for C<ev::embed> watchers>),
		4129	with the same arguments. Either this method or a suitable start method
2510	called at least once. Unlike the C counterpart, an active watcher gets	4130	must be called at least once. Unlike the C counterpart, an active watcher
2511	automatically stopped and restarted when reconfiguring it with this	4131	gets automatically stopped and restarted when reconfiguring it with this
2512	method.	4132	method.
		4133
		4134	For C<ev::embed> watchers this method is called C<set_embed>, to avoid
		4135	clashing with the C<set (loop)> method.
2513		4136
2514	=item w->start ()	4137	=item w->start ()
2515		4138
2516	Starts the watcher. Note that there is no C<loop> argument, as the	4139	Starts the watcher. Note that there is no C<loop> argument, as the
2517	constructor already stores the event loop.	4140	constructor already stores the event loop.
2518		4141
		4142	=item w->start ([arguments])
		4143
		4144	Instead of calling C<set> and C<start> methods separately, it is often
		4145	convenient to wrap them in one call. Uses the same type of arguments as
		4146	the configure C<set> method of the watcher.
		4147
2519	=item w->stop ()	4148	=item w->stop ()
2520		4149
2521	Stops the watcher if it is active. Again, no C<loop> argument.	4150	Stops the watcher if it is active. Again, no C<loop> argument.
2522		4151
2523	=item w->again () (C<ev::timer>, C<ev::periodic> only)	4152	=item w->again () (C<ev::timer>, C<ev::periodic> only)
…		…
2535		4164
2536	=back	4165	=back
2537		4166
2538	=back	4167	=back
2539		4168
2540	Example: Define a class with an IO and idle watcher, start one of them in	4169	Example: Define a class with two I/O and idle watchers, start the I/O
2541	the constructor.	4170	watchers in the constructor.
2542		4171
2543	class myclass	4172	class myclass
2544	{	4173	{
2545	ev::io io; void io_cb (ev::io &w, int revents);	4174	ev::io io ; void io_cb (ev::io &w, int revents);
		4175	ev::io io2 ; void io2_cb (ev::io &w, int revents);
2546	ev:idle idle void idle_cb (ev::idle &w, int revents);	4176	ev::idle idle; void idle_cb (ev::idle &w, int revents);
2547		4177
2548	myclass (int fd)	4178	myclass (int fd)
2549	{	4179	{
2550	io .set <myclass, &myclass::io_cb > (this);	4180	io .set <myclass, &myclass::io_cb > (this);
		4181	io2 .set <myclass, &myclass::io2_cb > (this);
2551	idle.set <myclass, &myclass::idle_cb> (this);	4182	idle.set <myclass, &myclass::idle_cb> (this);
2552		4183
2553	io.start (fd, ev::READ);	4184	io.set (fd, ev::WRITE); // configure the watcher
		4185	io.start (); // start it whenever convenient
		4186
		4187	io2.start (fd, ev::READ); // set + start in one call
2554	}	4188	}
2555	};	4189	};
2556		4190
2557		4191
2558	=head1 OTHER LANGUAGE BINDINGS	4192	=head1 OTHER LANGUAGE BINDINGS
2559		4193
2560	Libev does not offer other language bindings itself, but bindings for a	4194	Libev does not offer other language bindings itself, but bindings for a
2561	numbe rof languages exist in the form of third-party packages. If you know	4195	number of languages exist in the form of third-party packages. If you know
2562	any interesting language binding in addition to the ones listed here, drop	4196	any interesting language binding in addition to the ones listed here, drop
2563	me a note.	4197	me a note.
2564		4198
2565	=over 4	4199	=over 4
2566		4200
2567	=item Perl	4201	=item Perl
2568		4202
2569	The EV module implements the full libev API and is actually used to test	4203	The EV module implements the full libev API and is actually used to test
2570	libev. EV is developed together with libev. Apart from the EV core module,	4204	libev. EV is developed together with libev. Apart from the EV core module,
2571	there are additional modules that implement libev-compatible interfaces	4205	there are additional modules that implement libev-compatible interfaces
2572	to C<libadns> (C<EV::ADNS>), C<Net::SNMP> (C<Net::SNMP::EV>) and the	4206	to C<libadns> (C<EV::ADNS>, but C<AnyEvent::DNS> is preferred nowadays),
2573	C<libglib> event core (C<Glib::EV> and C<EV::Glib>).	4207	C<Net::SNMP> (C<Net::SNMP::EV>) and the C<libglib> event core (C<Glib::EV>
		4208	and C<EV::Glib>).
2574		4209
2575	It can be found and installed via CPAN, its homepage is found at	4210	It can be found and installed via CPAN, its homepage is at
2576	L<http://software.schmorp.de/pkg/EV>.	4211	L<http://software.schmorp.de/pkg/EV>.
2577		4212
		4213	=item Python
		4214
		4215	Python bindings can be found at L<http://code.google.com/p/pyev/>. It
		4216	seems to be quite complete and well-documented.
		4217
2578	=item Ruby	4218	=item Ruby
2579		4219
2580	Tony Arcieri has written a ruby extension that offers access to a subset	4220	Tony Arcieri has written a ruby extension that offers access to a subset
2581	of the libev API and adds filehandle abstractions, asynchronous DNS and	4221	of the libev API and adds file handle abstractions, asynchronous DNS and
2582	more on top of it. It can be found via gem servers. Its homepage is at	4222	more on top of it. It can be found via gem servers. Its homepage is at
2583	L<http://rev.rubyforge.org/>.	4223	L<http://rev.rubyforge.org/>.
2584		4224
		4225	Roger Pack reports that using the link order C<-lws2_32 -lmsvcrt-ruby-190>
		4226	makes rev work even on mingw.
		4227
		4228	=item Haskell
		4229
		4230	A haskell binding to libev is available at
		4231	L<http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hlibev>.
		4232
2585	=item D	4233	=item D
2586		4234
2587	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to	4235	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
2588	be found at L<http://git.llucax.com.ar/?p=software/ev.d.git;a=summary>.	4236	be found at L<http://www.llucax.com.ar/proj/ev.d/index.html>.
		4237
		4238	=item Ocaml
		4239
		4240	Erkki Seppala has written Ocaml bindings for libev, to be found at
		4241	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.
		4242
		4243	=item Lua
		4244
		4245	Brian Maher has written a partial interface to libev for lua (at the
		4246	time of this writing, only C<ev_io> and C<ev_timer>), to be found at
		4247	L<http://github.com/brimworks/lua-ev>.
		4248
		4249	=item Javascript
		4250
		4251	Node.js (L<http://nodejs.org>) uses libev as the underlying event library.
		4252
		4253	=item Others
		4254
		4255	There are others, and I stopped counting.
2589		4256
2590	=back	4257	=back
2591		4258
2592		4259
2593	=head1 MACRO MAGIC	4260	=head1 MACRO MAGIC
2594		4261
2595	Libev can be compiled with a variety of options, the most fundamantal	4262	Libev can be compiled with a variety of options, the most fundamental
2596	of which is C<EV_MULTIPLICITY>. This option determines whether (most)	4263	of which is C<EV_MULTIPLICITY>. This option determines whether (most)
2597	functions and callbacks have an initial C<struct ev_loop *> argument.	4264	functions and callbacks have an initial C<struct ev_loop *> argument.
2598		4265
2599	To make it easier to write programs that cope with either variant, the	4266	To make it easier to write programs that cope with either variant, the
2600	following macros are defined:	4267	following macros are defined:
…		…
2605		4272
2606	This provides the loop I<argument> for functions, if one is required ("ev	4273	This provides the loop I<argument> for functions, if one is required ("ev
2607	loop argument"). The C<EV_A> form is used when this is the sole argument,	4274	loop argument"). The C<EV_A> form is used when this is the sole argument,
2608	C<EV_A_> is used when other arguments are following. Example:	4275	C<EV_A_> is used when other arguments are following. Example:
2609		4276
2610	ev_unref (EV_A);	4277	ev_unref (EV_A);
2611	ev_timer_add (EV_A_ watcher);	4278	ev_timer_add (EV_A_ watcher);
2612	ev_loop (EV_A_ 0);	4279	ev_run (EV_A_ 0);
2613		4280
2614	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,	4281	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
2615	which is often provided by the following macro.	4282	which is often provided by the following macro.
2616		4283
2617	=item C<EV_P>, C<EV_P_>	4284	=item C<EV_P>, C<EV_P_>
2618		4285
2619	This provides the loop I<parameter> for functions, if one is required ("ev	4286	This provides the loop I<parameter> for functions, if one is required ("ev
2620	loop parameter"). The C<EV_P> form is used when this is the sole parameter,	4287	loop parameter"). The C<EV_P> form is used when this is the sole parameter,
2621	C<EV_P_> is used when other parameters are following. Example:	4288	C<EV_P_> is used when other parameters are following. Example:
2622		4289
2623	// this is how ev_unref is being declared	4290	// this is how ev_unref is being declared
2624	static void ev_unref (EV_P);	4291	static void ev_unref (EV_P);
2625		4292
2626	// this is how you can declare your typical callback	4293	// this is how you can declare your typical callback
2627	static void cb (EV_P_ ev_timer *w, int revents)	4294	static void cb (EV_P_ ev_timer *w, int revents)
2628		4295
2629	It declares a parameter C<loop> of type C<struct ev_loop *>, quite	4296	It declares a parameter C<loop> of type C<struct ev_loop *>, quite
2630	suitable for use with C<EV_A>.	4297	suitable for use with C<EV_A>.
2631		4298
2632	=item C<EV_DEFAULT>, C<EV_DEFAULT_>	4299	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
2633		4300
2634	Similar to the other two macros, this gives you the value of the default	4301	Similar to the other two macros, this gives you the value of the default
2635	loop, if multiple loops are supported ("ev loop default").	4302	loop, if multiple loops are supported ("ev loop default"). The default loop
		4303	will be initialised if it isn't already initialised.
		4304
		4305	For non-multiplicity builds, these macros do nothing, so you always have
		4306	to initialise the loop somewhere.
2636		4307
2637	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>	4308	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
2638		4309
2639	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the	4310	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
2640	default loop has been initialised (C<UC> == unchecked). Their behaviour	4311	default loop has been initialised (C<UC> == unchecked). Their behaviour
…		…
2648		4319
2649	Example: Declare and initialise a check watcher, utilising the above	4320	Example: Declare and initialise a check watcher, utilising the above
2650	macros so it will work regardless of whether multiple loops are supported	4321	macros so it will work regardless of whether multiple loops are supported
2651	or not.	4322	or not.
2652		4323
2653	static void	4324	static void
2654	check_cb (EV_P_ ev_timer *w, int revents)	4325	check_cb (EV_P_ ev_timer *w, int revents)
2655	{	4326	{
2656	ev_check_stop (EV_A_ w);	4327	ev_check_stop (EV_A_ w);
2657	}	4328	}
2658		4329
2659	ev_check check;	4330	ev_check check;
2660	ev_check_init (&check, check_cb);	4331	ev_check_init (&check, check_cb);
2661	ev_check_start (EV_DEFAULT_ &check);	4332	ev_check_start (EV_DEFAULT_ &check);
2662	ev_loop (EV_DEFAULT_ 0);	4333	ev_run (EV_DEFAULT_ 0);
2663		4334
2664	=head1 EMBEDDING	4335	=head1 EMBEDDING
2665		4336
2666	Libev can (and often is) directly embedded into host	4337	Libev can (and often is) directly embedded into host
2667	applications. Examples of applications that embed it include the Deliantra	4338	applications. Examples of applications that embed it include the Deliantra
…		…
2674	libev somewhere in your source tree).	4345	libev somewhere in your source tree).
2675		4346
2676	=head2 FILESETS	4347	=head2 FILESETS
2677		4348
2678	Depending on what features you need you need to include one or more sets of files	4349	Depending on what features you need you need to include one or more sets of files
2679	in your app.	4350	in your application.
2680		4351
2681	=head3 CORE EVENT LOOP	4352	=head3 CORE EVENT LOOP
2682		4353
2683	To include only the libev core (all the C<ev_*> functions), with manual	4354	To include only the libev core (all the C<ev_*> functions), with manual
2684	configuration (no autoconf):	4355	configuration (no autoconf):
2685		4356
2686	#define EV_STANDALONE 1	4357	#define EV_STANDALONE 1
2687	#include "ev.c"	4358	#include "ev.c"
2688		4359
2689	This will automatically include F<ev.h>, too, and should be done in a	4360	This will automatically include F<ev.h>, too, and should be done in a
2690	single C source file only to provide the function implementations. To use	4361	single C source file only to provide the function implementations. To use
2691	it, do the same for F<ev.h> in all files wishing to use this API (best	4362	it, do the same for F<ev.h> in all files wishing to use this API (best
2692	done by writing a wrapper around F<ev.h> that you can include instead and	4363	done by writing a wrapper around F<ev.h> that you can include instead and
2693	where you can put other configuration options):	4364	where you can put other configuration options):
2694		4365
2695	#define EV_STANDALONE 1	4366	#define EV_STANDALONE 1
2696	#include "ev.h"	4367	#include "ev.h"
2697		4368
2698	Both header files and implementation files can be compiled with a C++	4369	Both header files and implementation files can be compiled with a C++
2699	compiler (at least, thats a stated goal, and breakage will be treated	4370	compiler (at least, that's a stated goal, and breakage will be treated
2700	as a bug).	4371	as a bug).
2701		4372
2702	You need the following files in your source tree, or in a directory	4373	You need the following files in your source tree, or in a directory
2703	in your include path (e.g. in libev/ when using -Ilibev):	4374	in your include path (e.g. in libev/ when using -Ilibev):
2704		4375
2705	ev.h	4376	ev.h
2706	ev.c	4377	ev.c
2707	ev_vars.h	4378	ev_vars.h
2708	ev_wrap.h	4379	ev_wrap.h
2709		4380
2710	ev_win32.c required on win32 platforms only	4381	ev_win32.c required on win32 platforms only
2711		4382
2712	ev_select.c only when select backend is enabled (which is enabled by default)	4383	ev_select.c only when select backend is enabled (which is enabled by default)
2713	ev_poll.c only when poll backend is enabled (disabled by default)	4384	ev_poll.c only when poll backend is enabled (disabled by default)
2714	ev_epoll.c only when the epoll backend is enabled (disabled by default)	4385	ev_epoll.c only when the epoll backend is enabled (disabled by default)
2715	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)	4386	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)
2716	ev_port.c only when the solaris port backend is enabled (disabled by default)	4387	ev_port.c only when the solaris port backend is enabled (disabled by default)
2717		4388
2718	F<ev.c> includes the backend files directly when enabled, so you only need	4389	F<ev.c> includes the backend files directly when enabled, so you only need
2719	to compile this single file.	4390	to compile this single file.
2720		4391
2721	=head3 LIBEVENT COMPATIBILITY API	4392	=head3 LIBEVENT COMPATIBILITY API
2722		4393
2723	To include the libevent compatibility API, also include:	4394	To include the libevent compatibility API, also include:
2724		4395
2725	#include "event.c"	4396	#include "event.c"
2726		4397
2727	in the file including F<ev.c>, and:	4398	in the file including F<ev.c>, and:
2728		4399
2729	#include "event.h"	4400	#include "event.h"
2730		4401
2731	in the files that want to use the libevent API. This also includes F<ev.h>.	4402	in the files that want to use the libevent API. This also includes F<ev.h>.
2732		4403
2733	You need the following additional files for this:	4404	You need the following additional files for this:
2734		4405
2735	event.h	4406	event.h
2736	event.c	4407	event.c
2737		4408
2738	=head3 AUTOCONF SUPPORT	4409	=head3 AUTOCONF SUPPORT
2739		4410
2740	Instead of using C<EV_STANDALONE=1> and providing your config in	4411	Instead of using C<EV_STANDALONE=1> and providing your configuration in
2741	whatever way you want, you can also C<m4_include([libev.m4])> in your	4412	whatever way you want, you can also C<m4_include([libev.m4])> in your
2742	F<configure.ac> and leave C<EV_STANDALONE> undefined. F<ev.c> will then	4413	F<configure.ac> and leave C<EV_STANDALONE> undefined. F<ev.c> will then
2743	include F<config.h> and configure itself accordingly.	4414	include F<config.h> and configure itself accordingly.
2744		4415
2745	For this of course you need the m4 file:	4416	For this of course you need the m4 file:
2746		4417
2747	libev.m4	4418	libev.m4
2748		4419
2749	=head2 PREPROCESSOR SYMBOLS/MACROS	4420	=head2 PREPROCESSOR SYMBOLS/MACROS
2750		4421
2751	Libev can be configured via a variety of preprocessor symbols you have to	4422	Libev can be configured via a variety of preprocessor symbols you have to
2752	define before including any of its files. The default in the absense of	4423	define before including (or compiling) any of its files. The default in
2753	autoconf is noted for every option.	4424	the absence of autoconf is documented for every option.
		4425
		4426	Symbols marked with "(h)" do not change the ABI, and can have different
		4427	values when compiling libev vs. including F<ev.h>, so it is permissible
		4428	to redefine them before including F<ev.h> without breaking compatibility
		4429	to a compiled library. All other symbols change the ABI, which means all
		4430	users of libev and the libev code itself must be compiled with compatible
		4431	settings.
2754		4432
2755	=over 4	4433	=over 4
2756		4434
		4435	=item EV_COMPAT3 (h)
		4436
		4437	Backwards compatibility is a major concern for libev. This is why this
		4438	release of libev comes with wrappers for the functions and symbols that
		4439	have been renamed between libev version 3 and 4.
		4440
		4441	You can disable these wrappers (to test compatibility with future
		4442	versions) by defining C<EV_COMPAT3> to C<0> when compiling your
		4443	sources. This has the additional advantage that you can drop the C<struct>
		4444	from C<struct ev_loop> declarations, as libev will provide an C<ev_loop>
		4445	typedef in that case.
		4446
		4447	In some future version, the default for C<EV_COMPAT3> will become C<0>,
		4448	and in some even more future version the compatibility code will be
		4449	removed completely.
		4450
2757	=item EV_STANDALONE	4451	=item EV_STANDALONE (h)
2758		4452
2759	Must always be C<1> if you do not use autoconf configuration, which	4453	Must always be C<1> if you do not use autoconf configuration, which
2760	keeps libev from including F<config.h>, and it also defines dummy	4454	keeps libev from including F<config.h>, and it also defines dummy
2761	implementations for some libevent functions (such as logging, which is not	4455	implementations for some libevent functions (such as logging, which is not
2762	supported). It will also not define any of the structs usually found in	4456	supported). It will also not define any of the structs usually found in
2763	F<event.h> that are not directly supported by the libev core alone.	4457	F<event.h> that are not directly supported by the libev core alone.
2764		4458
		4459	In standalone mode, libev will still try to automatically deduce the
		4460	configuration, but has to be more conservative.
		4461
		4462	=item EV_USE_FLOOR
		4463
		4464	If defined to be C<1>, libev will use the C<floor ()> function for its
		4465	periodic reschedule calculations, otherwise libev will fall back on a
		4466	portable (slower) implementation. If you enable this, you usually have to
		4467	link against libm or something equivalent. Enabling this when the C<floor>
		4468	function is not available will fail, so the safe default is to not enable
		4469	this.
		4470
2765	=item EV_USE_MONOTONIC	4471	=item EV_USE_MONOTONIC
2766		4472
2767	If defined to be C<1>, libev will try to detect the availability of the	4473	If defined to be C<1>, libev will try to detect the availability of the
2768	monotonic clock option at both compiletime and runtime. Otherwise no use	4474	monotonic clock option at both compile time and runtime. Otherwise no
2769	of the monotonic clock option will be attempted. If you enable this, you	4475	use of the monotonic clock option will be attempted. If you enable this,
2770	usually have to link against librt or something similar. Enabling it when	4476	you usually have to link against librt or something similar. Enabling it
2771	the functionality isn't available is safe, though, although you have	4477	when the functionality isn't available is safe, though, although you have
2772	to make sure you link against any libraries where the C<clock_gettime>	4478	to make sure you link against any libraries where the C<clock_gettime>
2773	function is hiding in (often F<-lrt>).	4479	function is hiding in (often F<-lrt>). See also C<EV_USE_CLOCK_SYSCALL>.
2774		4480
2775	=item EV_USE_REALTIME	4481	=item EV_USE_REALTIME
2776		4482
2777	If defined to be C<1>, libev will try to detect the availability of the	4483	If defined to be C<1>, libev will try to detect the availability of the
2778	realtime clock option at compiletime (and assume its availability at	4484	real-time clock option at compile time (and assume its availability
2779	runtime if successful). Otherwise no use of the realtime clock option will	4485	at runtime if successful). Otherwise no use of the real-time clock
2780	be attempted. This effectively replaces C<gettimeofday> by C<clock_get	4486	option will be attempted. This effectively replaces C<gettimeofday>
2781	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See the	4487	by C<clock_get (CLOCK_REALTIME, ...)> and will not normally affect
2782	note about libraries in the description of C<EV_USE_MONOTONIC>, though.	4488	correctness. See the note about libraries in the description of
		4489	C<EV_USE_MONOTONIC>, though. Defaults to the opposite value of
		4490	C<EV_USE_CLOCK_SYSCALL>.
		4491
		4492	=item EV_USE_CLOCK_SYSCALL
		4493
		4494	If defined to be C<1>, libev will try to use a direct syscall instead
		4495	of calling the system-provided C<clock_gettime> function. This option
		4496	exists because on GNU/Linux, C<clock_gettime> is in C<librt>, but C<librt>
		4497	unconditionally pulls in C<libpthread>, slowing down single-threaded
		4498	programs needlessly. Using a direct syscall is slightly slower (in
		4499	theory), because no optimised vdso implementation can be used, but avoids
		4500	the pthread dependency. Defaults to C<1> on GNU/Linux with glibc 2.x or
		4501	higher, as it simplifies linking (no need for C<-lrt>).
2783		4502
2784	=item EV_USE_NANOSLEEP	4503	=item EV_USE_NANOSLEEP
2785		4504
2786	If defined to be C<1>, libev will assume that C<nanosleep ()> is available	4505	If defined to be C<1>, libev will assume that C<nanosleep ()> is available
2787	and will use it for delays. Otherwise it will use C<select ()>.	4506	and will use it for delays. Otherwise it will use C<select ()>.
…		…
2795	2.7 or newer, otherwise disabled.	4514	2.7 or newer, otherwise disabled.
2796		4515
2797	=item EV_USE_SELECT	4516	=item EV_USE_SELECT
2798		4517
2799	If undefined or defined to be C<1>, libev will compile in support for the	4518	If undefined or defined to be C<1>, libev will compile in support for the
2800	C<select>(2) backend. No attempt at autodetection will be done: if no	4519	C<select>(2) backend. No attempt at auto-detection will be done: if no
2801	other method takes over, select will be it. Otherwise the select backend	4520	other method takes over, select will be it. Otherwise the select backend
2802	will not be compiled in.	4521	will not be compiled in.
2803		4522
2804	=item EV_SELECT_USE_FD_SET	4523	=item EV_SELECT_USE_FD_SET
2805		4524
2806	If defined to C<1>, then the select backend will use the system C<fd_set>	4525	If defined to C<1>, then the select backend will use the system C<fd_set>
2807	structure. This is useful if libev doesn't compile due to a missing	4526	structure. This is useful if libev doesn't compile due to a missing
2808	C<NFDBITS> or C<fd_mask> definition or it misguesses the bitset layout on	4527	C<NFDBITS> or C<fd_mask> definition or it mis-guesses the bitset layout
2809	exotic systems. This usually limits the range of file descriptors to some	4528	on exotic systems. This usually limits the range of file descriptors to
2810	low limit such as 1024 or might have other limitations (winsocket only	4529	some low limit such as 1024 or might have other limitations (winsocket
2811	allows 64 sockets). The C<FD_SETSIZE> macro, set before compilation, might	4530	only allows 64 sockets). The C<FD_SETSIZE> macro, set before compilation,
2812	influence the size of the C<fd_set> used.	4531	configures the maximum size of the C<fd_set>.
2813		4532
2814	=item EV_SELECT_IS_WINSOCKET	4533	=item EV_SELECT_IS_WINSOCKET
2815		4534
2816	When defined to C<1>, the select backend will assume that	4535	When defined to C<1>, the select backend will assume that
2817	select/socket/connect etc. don't understand file descriptors but	4536	select/socket/connect etc. don't understand file descriptors but
…		…
2819	be used is the winsock select). This means that it will call	4538	be used is the winsock select). This means that it will call
2820	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	4539	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
2821	it is assumed that all these functions actually work on fds, even	4540	it is assumed that all these functions actually work on fds, even
2822	on win32. Should not be defined on non-win32 platforms.	4541	on win32. Should not be defined on non-win32 platforms.
2823		4542
2824	=item EV_FD_TO_WIN32_HANDLE	4543	=item EV_FD_TO_WIN32_HANDLE(fd)
2825		4544
2826	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map	4545	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
2827	file descriptors to socket handles. When not defining this symbol (the	4546	file descriptors to socket handles. When not defining this symbol (the
2828	default), then libev will call C<_get_osfhandle>, which is usually	4547	default), then libev will call C<_get_osfhandle>, which is usually
2829	correct. In some cases, programs use their own file descriptor management,	4548	correct. In some cases, programs use their own file descriptor management,
2830	in which case they can provide this function to map fds to socket handles.	4549	in which case they can provide this function to map fds to socket handles.
		4550
		4551	=item EV_WIN32_HANDLE_TO_FD(handle)
		4552
		4553	If C<EV_SELECT_IS_WINSOCKET> then libev maps handles to file descriptors
		4554	using the standard C<_open_osfhandle> function. For programs implementing
		4555	their own fd to handle mapping, overwriting this function makes it easier
		4556	to do so. This can be done by defining this macro to an appropriate value.
		4557
		4558	=item EV_WIN32_CLOSE_FD(fd)
		4559
		4560	If programs implement their own fd to handle mapping on win32, then this
		4561	macro can be used to override the C<close> function, useful to unregister
		4562	file descriptors again. Note that the replacement function has to close
		4563	the underlying OS handle.
		4564
		4565	=item EV_USE_WSASOCKET
		4566
		4567	If defined to be C<1>, libev will use C<WSASocket> to create its internal
		4568	communication socket, which works better in some environments. Otherwise,
		4569	the normal C<socket> function will be used, which works better in other
		4570	environments.
2831		4571
2832	=item EV_USE_POLL	4572	=item EV_USE_POLL
2833		4573
2834	If defined to be C<1>, libev will compile in support for the C<poll>(2)	4574	If defined to be C<1>, libev will compile in support for the C<poll>(2)
2835	backend. Otherwise it will be enabled on non-win32 platforms. It	4575	backend. Otherwise it will be enabled on non-win32 platforms. It
…		…
2862	otherwise another method will be used as fallback. This is the preferred	4602	otherwise another method will be used as fallback. This is the preferred
2863	backend for Solaris 10 systems.	4603	backend for Solaris 10 systems.
2864		4604
2865	=item EV_USE_DEVPOLL	4605	=item EV_USE_DEVPOLL
2866		4606
2867	reserved for future expansion, works like the USE symbols above.	4607	Reserved for future expansion, works like the USE symbols above.
2868		4608
2869	=item EV_USE_INOTIFY	4609	=item EV_USE_INOTIFY
2870		4610
2871	If defined to be C<1>, libev will compile in support for the Linux inotify	4611	If defined to be C<1>, libev will compile in support for the Linux inotify
2872	interface to speed up C<ev_stat> watchers. Its actual availability will	4612	interface to speed up C<ev_stat> watchers. Its actual availability will
2873	be detected at runtime. If undefined, it will be enabled if the headers	4613	be detected at runtime. If undefined, it will be enabled if the headers
2874	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.	4614	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
2875		4615
		4616	=item EV_NO_SMP
		4617
		4618	If defined to be C<1>, libev will assume that memory is always coherent
		4619	between threads, that is, threads can be used, but threads never run on
		4620	different cpus (or different cpu cores). This reduces dependencies
		4621	and makes libev faster.
		4622
		4623	=item EV_NO_THREADS
		4624
		4625	If defined to be C<1>, libev will assume that it will never be called from
		4626	different threads (that includes signal handlers), which is a stronger
		4627	assumption than C<EV_NO_SMP>, above. This reduces dependencies and makes
		4628	libev faster.
		4629
2876	=item EV_ATOMIC_T	4630	=item EV_ATOMIC_T
2877		4631
2878	Libev requires an integer type (suitable for storing C<0> or C<1>) whose	4632	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
2879	access is atomic with respect to other threads or signal contexts. No such	4633	access is atomic with respect to other threads or signal contexts. No
2880	type is easily found in the C language, so you can provide your own type	4634	such type is easily found in the C language, so you can provide your own
2881	that you know is safe for your purposes. It is used both for signal handler "locking"	4635	type that you know is safe for your purposes. It is used both for signal
2882	as well as for signal and thread safety in C<ev_async> watchers.	4636	handler "locking" as well as for signal and thread safety in C<ev_async>
		4637	watchers.
2883		4638
2884	In the absense of this define, libev will use C<sig_atomic_t volatile>	4639	In the absence of this define, libev will use C<sig_atomic_t volatile>
2885	(from F<signal.h>), which is usually good enough on most platforms.	4640	(from F<signal.h>), which is usually good enough on most platforms.
2886		4641
2887	=item EV_H	4642	=item EV_H (h)
2888		4643
2889	The name of the F<ev.h> header file used to include it. The default if	4644	The name of the F<ev.h> header file used to include it. The default if
2890	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be	4645	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
2891	used to virtually rename the F<ev.h> header file in case of conflicts.	4646	used to virtually rename the F<ev.h> header file in case of conflicts.
2892		4647
2893	=item EV_CONFIG_H	4648	=item EV_CONFIG_H (h)
2894		4649
2895	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	4650	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
2896	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	4651	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
2897	C<EV_H>, above.	4652	C<EV_H>, above.
2898		4653
2899	=item EV_EVENT_H	4654	=item EV_EVENT_H (h)
2900		4655
2901	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	4656	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
2902	of how the F<event.h> header can be found, the default is C<"event.h">.	4657	of how the F<event.h> header can be found, the default is C<"event.h">.
2903		4658
2904	=item EV_PROTOTYPES	4659	=item EV_PROTOTYPES (h)
2905		4660
2906	If defined to be C<0>, then F<ev.h> will not define any function	4661	If defined to be C<0>, then F<ev.h> will not define any function
2907	prototypes, but still define all the structs and other symbols. This is	4662	prototypes, but still define all the structs and other symbols. This is
2908	occasionally useful if you want to provide your own wrapper functions	4663	occasionally useful if you want to provide your own wrapper functions
2909	around libev functions.	4664	around libev functions.
…		…
2914	will have the C<struct ev_loop *> as first argument, and you can create	4669	will have the C<struct ev_loop *> as first argument, and you can create
2915	additional independent event loops. Otherwise there will be no support	4670	additional independent event loops. Otherwise there will be no support
2916	for multiple event loops and there is no first event loop pointer	4671	for multiple event loops and there is no first event loop pointer
2917	argument. Instead, all functions act on the single default loop.	4672	argument. Instead, all functions act on the single default loop.
2918		4673
		4674	Note that C<EV_DEFAULT> and C<EV_DEFAULT_> will no longer provide a
		4675	default loop when multiplicity is switched off - you always have to
		4676	initialise the loop manually in this case.
		4677
2919	=item EV_MINPRI	4678	=item EV_MINPRI
2920		4679
2921	=item EV_MAXPRI	4680	=item EV_MAXPRI
2922		4681
2923	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to	4682	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to
…		…
2928	When doing priority-based operations, libev usually has to linearly search	4687	When doing priority-based operations, libev usually has to linearly search
2929	all the priorities, so having many of them (hundreds) uses a lot of space	4688	all the priorities, so having many of them (hundreds) uses a lot of space
2930	and time, so using the defaults of five priorities (-2 .. +2) is usually	4689	and time, so using the defaults of five priorities (-2 .. +2) is usually
2931	fine.	4690	fine.
2932		4691
2933	If your embedding app does not need any priorities, defining these both to	4692	If your embedding application does not need any priorities, defining these
2934	C<0> will save some memory and cpu.	4693	both to C<0> will save some memory and CPU.
2935		4694
2936	=item EV_PERIODIC_ENABLE	4695	=item EV_PERIODIC_ENABLE, EV_IDLE_ENABLE, EV_EMBED_ENABLE, EV_STAT_ENABLE,
		4696	EV_PREPARE_ENABLE, EV_CHECK_ENABLE, EV_FORK_ENABLE, EV_SIGNAL_ENABLE,
		4697	EV_ASYNC_ENABLE, EV_CHILD_ENABLE.
2937		4698
2938	If undefined or defined to be C<1>, then periodic timers are supported. If	4699	If undefined or defined to be C<1> (and the platform supports it), then
2939	defined to be C<0>, then they are not. Disabling them saves a few kB of	4700	the respective watcher type is supported. If defined to be C<0>, then it
2940	code.	4701	is not. Disabling watcher types mainly saves code size.
2941		4702
2942	=item EV_IDLE_ENABLE	4703	=item EV_FEATURES
2943
2944	If undefined or defined to be C<1>, then idle watchers are supported. If
2945	defined to be C<0>, then they are not. Disabling them saves a few kB of
2946	code.
2947
2948	=item EV_EMBED_ENABLE
2949
2950	If undefined or defined to be C<1>, then embed watchers are supported. If
2951	defined to be C<0>, then they are not.
2952
2953	=item EV_STAT_ENABLE
2954
2955	If undefined or defined to be C<1>, then stat watchers are supported. If
2956	defined to be C<0>, then they are not.
2957
2958	=item EV_FORK_ENABLE
2959
2960	If undefined or defined to be C<1>, then fork watchers are supported. If
2961	defined to be C<0>, then they are not.
2962
2963	=item EV_ASYNC_ENABLE
2964
2965	If undefined or defined to be C<1>, then async watchers are supported. If
2966	defined to be C<0>, then they are not.
2967
2968	=item EV_MINIMAL
2969		4704
2970	If you need to shave off some kilobytes of code at the expense of some	4705	If you need to shave off some kilobytes of code at the expense of some
2971	speed, define this symbol to C<1>. Currently only used for gcc to override	4706	speed (but with the full API), you can define this symbol to request
2972	some inlining decisions, saves roughly 30% codesize of amd64.	4707	certain subsets of functionality. The default is to enable all features
		4708	that can be enabled on the platform.
		4709
		4710	A typical way to use this symbol is to define it to C<0> (or to a bitset
		4711	with some broad features you want) and then selectively re-enable
		4712	additional parts you want, for example if you want everything minimal,
		4713	but multiple event loop support, async and child watchers and the poll
		4714	backend, use this:
		4715
		4716	#define EV_FEATURES 0
		4717	#define EV_MULTIPLICITY 1
		4718	#define EV_USE_POLL 1
		4719	#define EV_CHILD_ENABLE 1
		4720	#define EV_ASYNC_ENABLE 1
		4721
		4722	The actual value is a bitset, it can be a combination of the following
		4723	values (by default, all of these are enabled):
		4724
		4725	=over 4
		4726
		4727	=item C<1> - faster/larger code
		4728
		4729	Use larger code to speed up some operations.
		4730
		4731	Currently this is used to override some inlining decisions (enlarging the
		4732	code size by roughly 30% on amd64).
		4733
		4734	When optimising for size, use of compiler flags such as C<-Os> with
		4735	gcc is recommended, as well as C<-DNDEBUG>, as libev contains a number of
		4736	assertions.
		4737
		4738	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4739	(e.g. gcc with C<-Os>).
		4740
		4741	=item C<2> - faster/larger data structures
		4742
		4743	Replaces the small 2-heap for timer management by a faster 4-heap, larger
		4744	hash table sizes and so on. This will usually further increase code size
		4745	and can additionally have an effect on the size of data structures at
		4746	runtime.
		4747
		4748	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4749	(e.g. gcc with C<-Os>).
		4750
		4751	=item C<4> - full API configuration
		4752
		4753	This enables priorities (sets C<EV_MAXPRI>=2 and C<EV_MINPRI>=-2), and
		4754	enables multiplicity (C<EV_MULTIPLICITY>=1).
		4755
		4756	=item C<8> - full API
		4757
		4758	This enables a lot of the "lesser used" API functions. See C<ev.h> for
		4759	details on which parts of the API are still available without this
		4760	feature, and do not complain if this subset changes over time.
		4761
		4762	=item C<16> - enable all optional watcher types
		4763
		4764	Enables all optional watcher types. If you want to selectively enable
		4765	only some watcher types other than I/O and timers (e.g. prepare,
		4766	embed, async, child...) you can enable them manually by defining
		4767	C<EV_watchertype_ENABLE> to C<1> instead.
		4768
		4769	=item C<32> - enable all backends
		4770
		4771	This enables all backends - without this feature, you need to enable at
		4772	least one backend manually (C<EV_USE_SELECT> is a good choice).
		4773
		4774	=item C<64> - enable OS-specific "helper" APIs
		4775
		4776	Enable inotify, eventfd, signalfd and similar OS-specific helper APIs by
		4777	default.
		4778
		4779	=back
		4780
		4781	Compiling with C<gcc -Os -DEV_STANDALONE -DEV_USE_EPOLL=1 -DEV_FEATURES=0>
		4782	reduces the compiled size of libev from 24.7Kb code/2.8Kb data to 6.5Kb
		4783	code/0.3Kb data on my GNU/Linux amd64 system, while still giving you I/O
		4784	watchers, timers and monotonic clock support.
		4785
		4786	With an intelligent-enough linker (gcc+binutils are intelligent enough
		4787	when you use C<-Wl,--gc-sections -ffunction-sections>) functions unused by
		4788	your program might be left out as well - a binary starting a timer and an
		4789	I/O watcher then might come out at only 5Kb.
		4790
		4791	=item EV_API_STATIC
		4792
		4793	If this symbol is defined (by default it is not), then all identifiers
		4794	will have static linkage. This means that libev will not export any
		4795	identifiers, and you cannot link against libev anymore. This can be useful
		4796	when you embed libev, only want to use libev functions in a single file,
		4797	and do not want its identifiers to be visible.
		4798
		4799	To use this, define C<EV_API_STATIC> and include F<ev.c> in the file that
		4800	wants to use libev.
		4801
		4802	This option only works when libev is compiled with a C compiler, as C++
		4803	doesn't support the required declaration syntax.
		4804
		4805	=item EV_AVOID_STDIO
		4806
		4807	If this is set to C<1> at compiletime, then libev will avoid using stdio
		4808	functions (printf, scanf, perror etc.). This will increase the code size
		4809	somewhat, but if your program doesn't otherwise depend on stdio and your
		4810	libc allows it, this avoids linking in the stdio library which is quite
		4811	big.
		4812
		4813	Note that error messages might become less precise when this option is
		4814	enabled.
		4815
		4816	=item EV_NSIG
		4817
		4818	The highest supported signal number, +1 (or, the number of
		4819	signals): Normally, libev tries to deduce the maximum number of signals
		4820	automatically, but sometimes this fails, in which case it can be
		4821	specified. Also, using a lower number than detected (C<32> should be
		4822	good for about any system in existence) can save some memory, as libev
		4823	statically allocates some 12-24 bytes per signal number.
2973		4824
2974	=item EV_PID_HASHSIZE	4825	=item EV_PID_HASHSIZE
2975		4826
2976	C<ev_child> watchers use a small hash table to distribute workload by	4827	C<ev_child> watchers use a small hash table to distribute workload by
2977	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	4828	pid. The default size is C<16> (or C<1> with C<EV_FEATURES> disabled),
2978	than enough. If you need to manage thousands of children you might want to	4829	usually more than enough. If you need to manage thousands of children you
2979	increase this value (I<must> be a power of two).	4830	might want to increase this value (I<must> be a power of two).
2980		4831
2981	=item EV_INOTIFY_HASHSIZE	4832	=item EV_INOTIFY_HASHSIZE
2982		4833
2983	C<ev_stat> watchers use a small hash table to distribute workload by	4834	C<ev_stat> watchers use a small hash table to distribute workload by
2984	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	4835	inotify watch id. The default size is C<16> (or C<1> with C<EV_FEATURES>
2985	usually more than enough. If you need to manage thousands of C<ev_stat>	4836	disabled), usually more than enough. If you need to manage thousands of
2986	watchers you might want to increase this value (I<must> be a power of	4837	C<ev_stat> watchers you might want to increase this value (I<must> be a
2987	two).	4838	power of two).
		4839
		4840	=item EV_USE_4HEAP
		4841
		4842	Heaps are not very cache-efficient. To improve the cache-efficiency of the
		4843	timer and periodics heaps, libev uses a 4-heap when this symbol is defined
		4844	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably
		4845	faster performance with many (thousands) of watchers.
		4846
		4847	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
		4848	will be C<0>.
		4849
		4850	=item EV_HEAP_CACHE_AT
		4851
		4852	Heaps are not very cache-efficient. To improve the cache-efficiency of the
		4853	timer and periodics heaps, libev can cache the timestamp (I<at>) within
		4854	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
		4855	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
		4856	but avoids random read accesses on heap changes. This improves performance
		4857	noticeably with many (hundreds) of watchers.
		4858
		4859	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
		4860	will be C<0>.
		4861
		4862	=item EV_VERIFY
		4863
		4864	Controls how much internal verification (see C<ev_verify ()>) will
		4865	be done: If set to C<0>, no internal verification code will be compiled
		4866	in. If set to C<1>, then verification code will be compiled in, but not
		4867	called. If set to C<2>, then the internal verification code will be
		4868	called once per loop, which can slow down libev. If set to C<3>, then the
		4869	verification code will be called very frequently, which will slow down
		4870	libev considerably.
		4871
		4872	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
		4873	will be C<0>.
2988		4874
2989	=item EV_COMMON	4875	=item EV_COMMON
2990		4876
2991	By default, all watchers have a C<void *data> member. By redefining	4877	By default, all watchers have a C<void *data> member. By redefining
2992	this macro to a something else you can include more and other types of	4878	this macro to something else you can include more and other types of
2993	members. You have to define it each time you include one of the files,	4879	members. You have to define it each time you include one of the files,
2994	though, and it must be identical each time.	4880	though, and it must be identical each time.
2995		4881
2996	For example, the perl EV module uses something like this:	4882	For example, the perl EV module uses something like this:
2997		4883
2998	#define EV_COMMON \	4884	#define EV_COMMON \
2999	SV *self; /* contains this struct */ \	4885	SV *self; /* contains this struct */ \
3000	SV *cb_sv, *fh /* note no trailing ";" */	4886	SV *cb_sv, *fh /* note no trailing ";" */
3001		4887
3002	=item EV_CB_DECLARE (type)	4888	=item EV_CB_DECLARE (type)
3003		4889
3004	=item EV_CB_INVOKE (watcher, revents)	4890	=item EV_CB_INVOKE (watcher, revents)
3005		4891
…		…
3010	definition and a statement, respectively. See the F<ev.h> header file for	4896	definition and a statement, respectively. See the F<ev.h> header file for
3011	their default definitions. One possible use for overriding these is to	4897	their default definitions. One possible use for overriding these is to
3012	avoid the C<struct ev_loop *> as first argument in all cases, or to use	4898	avoid the C<struct ev_loop *> as first argument in all cases, or to use
3013	method calls instead of plain function calls in C++.	4899	method calls instead of plain function calls in C++.
3014		4900
		4901	=back
		4902
3015	=head2 EXPORTED API SYMBOLS	4903	=head2 EXPORTED API SYMBOLS
3016		4904
3017	If you need to re-export the API (e.g. via a dll) and you need a list of	4905	If you need to re-export the API (e.g. via a DLL) and you need a list of
3018	exported symbols, you can use the provided F<Symbol.*> files which list	4906	exported symbols, you can use the provided F<Symbol.*> files which list
3019	all public symbols, one per line:	4907	all public symbols, one per line:
3020		4908
3021	Symbols.ev for libev proper	4909	Symbols.ev for libev proper
3022	Symbols.event for the libevent emulation	4910	Symbols.event for the libevent emulation
3023		4911
3024	This can also be used to rename all public symbols to avoid clashes with	4912	This can also be used to rename all public symbols to avoid clashes with
3025	multiple versions of libev linked together (which is obviously bad in	4913	multiple versions of libev linked together (which is obviously bad in
3026	itself, but sometimes it is inconvinient to avoid this).	4914	itself, but sometimes it is inconvenient to avoid this).
3027		4915
3028	A sed command like this will create wrapper C<#define>'s that you need to	4916	A sed command like this will create wrapper C<#define>'s that you need to
3029	include before including F<ev.h>:	4917	include before including F<ev.h>:
3030		4918
3031	<Symbols.ev sed -e "s/.*/#define & myprefix_&/" >wrap.h	4919	<Symbols.ev sed -e "s/.*/#define & myprefix_&/" >wrap.h
…		…
3048	file.	4936	file.
3049		4937
3050	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	4938	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
3051	that everybody includes and which overrides some configure choices:	4939	that everybody includes and which overrides some configure choices:
3052		4940
3053	#define EV_MINIMAL 1	4941	#define EV_FEATURES 8
3054	#define EV_USE_POLL 0	4942	#define EV_USE_SELECT 1
3055	#define EV_MULTIPLICITY 0
3056	#define EV_PERIODIC_ENABLE 0	4943	#define EV_PREPARE_ENABLE 1
		4944	#define EV_IDLE_ENABLE 1
3057	#define EV_STAT_ENABLE 0	4945	#define EV_SIGNAL_ENABLE 1
3058	#define EV_FORK_ENABLE 0	4946	#define EV_CHILD_ENABLE 1
		4947	#define EV_USE_STDEXCEPT 0
3059	#define EV_CONFIG_H <config.h>	4948	#define EV_CONFIG_H <config.h>
3060	#define EV_MINPRI 0
3061	#define EV_MAXPRI 0
3062		4949
3063	#include "ev++.h"	4950	#include "ev++.h"
3064		4951
3065	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	4952	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
3066		4953
3067	#include "ev_cpp.h"	4954	#include "ev_cpp.h"
3068	#include "ev.c"	4955	#include "ev.c"
3069		4956
		4957	=head1 INTERACTION WITH OTHER PROGRAMS, LIBRARIES OR THE ENVIRONMENT
3070		4958
3071	=head1 THREADS AND COROUTINES	4959	=head2 THREADS AND COROUTINES
3072		4960
3073	=head2 THREADS	4961	=head3 THREADS
3074		4962
3075	Libev itself is completely threadsafe, but it uses no locking. This	4963	All libev functions are reentrant and thread-safe unless explicitly
		4964	documented otherwise, but libev implements no locking itself. This means
3076	means that you can use as many loops as you want in parallel, as long as	4965	that you can use as many loops as you want in parallel, as long as there
3077	only one thread ever calls into one libev function with the same loop	4966	are no concurrent calls into any libev function with the same loop
3078	parameter.	4967	parameter (C<ev_default_*> calls have an implicit default loop parameter,
		4968	of course): libev guarantees that different event loops share no data
		4969	structures that need any locking.
3079		4970
3080	Or put differently: calls with different loop parameters can be done in	4971	Or to put it differently: calls with different loop parameters can be done
3081	parallel from multiple threads, calls with the same loop parameter must be	4972	concurrently from multiple threads, calls with the same loop parameter
3082	done serially (but can be done from different threads, as long as only one	4973	must be done serially (but can be done from different threads, as long as
3083	thread ever is inside a call at any point in time, e.g. by using a mutex	4974	only one thread ever is inside a call at any point in time, e.g. by using
3084	per loop).	4975	a mutex per loop).
3085		4976
3086	If you want to know which design is best for your problem, then I cannot	4977	Specifically to support threads (and signal handlers), libev implements
		4978	so-called C<ev_async> watchers, which allow some limited form of
		4979	concurrency on the same event loop, namely waking it up "from the
		4980	outside".
		4981
		4982	If you want to know which design (one loop, locking, or multiple loops
		4983	without or something else still) is best for your problem, then I cannot
3087	help you but by giving some generic advice:	4984	help you, but here is some generic advice:
3088		4985
3089	=over 4	4986	=over 4
3090		4987
3091	=item * most applications have a main thread: use the default libev loop	4988	=item * most applications have a main thread: use the default libev loop
3092	in that thread, or create a seperate thread running only the default loop.	4989	in that thread, or create a separate thread running only the default loop.
3093		4990
3094	This helps integrating other libraries or software modules that use libev	4991	This helps integrating other libraries or software modules that use libev
3095	themselves and don't care/know about threading.	4992	themselves and don't care/know about threading.
3096		4993
3097	=item * one loop per thread is usually a good model.	4994	=item * one loop per thread is usually a good model.
3098		4995
3099	Doing this is almost never wrong, sometimes a better-performance model	4996	Doing this is almost never wrong, sometimes a better-performance model
3100	exists, but it is always a good start.	4997	exists, but it is always a good start.
3101		4998
3102	=item * other models exist, such as the leader/follower pattern, where one	4999	=item * other models exist, such as the leader/follower pattern, where one
3103	loop is handed through multiple threads in a kind of round-robbin fashion.	5000	loop is handed through multiple threads in a kind of round-robin fashion.
3104		5001
3105	Chosing a model is hard - look around, learn, know that usually you cna do	5002	Choosing a model is hard - look around, learn, know that usually you can do
3106	better than you currently do :-)	5003	better than you currently do :-)
3107		5004
3108	=item * often you need to talk to some other thread which blocks in the	5005	=item * often you need to talk to some other thread which blocks in the
		5006	event loop.
		5007
3109	event loop - C<ev_async> watchers can be used to wake them up from other	5008	C<ev_async> watchers can be used to wake them up from other threads safely
3110	threads safely (or from signal contexts...).	5009	(or from signal contexts...).
		5010
		5011	An example use would be to communicate signals or other events that only
		5012	work in the default loop by registering the signal watcher with the
		5013	default loop and triggering an C<ev_async> watcher from the default loop
		5014	watcher callback into the event loop interested in the signal.
3111		5015
3112	=back	5016	=back
3113		5017
		5018	See also L</THREAD LOCKING EXAMPLE>.
		5019
3114	=head2 COROUTINES	5020	=head3 COROUTINES
3115		5021
3116	Libev is much more accomodating to coroutines ("cooperative threads"):	5022	Libev is very accommodating to coroutines ("cooperative threads"):
3117	libev fully supports nesting calls to it's functions from different	5023	libev fully supports nesting calls to its functions from different
3118	coroutines (e.g. you can call C<ev_loop> on the same loop from two	5024	coroutines (e.g. you can call C<ev_run> on the same loop from two
3119	different coroutines and switch freely between both coroutines running the	5025	different coroutines, and switch freely between both coroutines running
3120	loop, as long as you don't confuse yourself). The only exception is that	5026	the loop, as long as you don't confuse yourself). The only exception is
3121	you must not do this from C<ev_periodic> reschedule callbacks.	5027	that you must not do this from C<ev_periodic> reschedule callbacks.
3122		5028
3123	Care has been invested into making sure that libev does not keep local	5029	Care has been taken to ensure that libev does not keep local state inside
3124	state inside C<ev_loop>, and other calls do not usually allow coroutine	5030	C<ev_run>, and other calls do not usually allow for coroutine switches as
3125	switches.	5031	they do not call any callbacks.
3126		5032
		5033	=head2 COMPILER WARNINGS
3127		5034
3128	=head1 COMPLEXITIES	5035	Depending on your compiler and compiler settings, you might get no or a
		5036	lot of warnings when compiling libev code. Some people are apparently
		5037	scared by this.
3129		5038
3130	In this section the complexities of (many of) the algorithms used inside	5039	However, these are unavoidable for many reasons. For one, each compiler
3131	libev will be explained. For complexity discussions about backends see the	5040	has different warnings, and each user has different tastes regarding
3132	documentation for C<ev_default_init>.	5041	warning options. "Warn-free" code therefore cannot be a goal except when
		5042	targeting a specific compiler and compiler-version.
3133		5043
3134	All of the following are about amortised time: If an array needs to be	5044	Another reason is that some compiler warnings require elaborate
3135	extended, libev needs to realloc and move the whole array, but this	5045	workarounds, or other changes to the code that make it less clear and less
3136	happens asymptotically never with higher number of elements, so O(1) might	5046	maintainable.
3137	mean it might do a lengthy realloc operation in rare cases, but on average
3138	it is much faster and asymptotically approaches constant time.
3139		5047
3140	=over 4	5048	And of course, some compiler warnings are just plain stupid, or simply
		5049	wrong (because they don't actually warn about the condition their message
		5050	seems to warn about). For example, certain older gcc versions had some
		5051	warnings that resulted in an extreme number of false positives. These have
		5052	been fixed, but some people still insist on making code warn-free with
		5053	such buggy versions.
3141		5054
3142	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)	5055	While libev is written to generate as few warnings as possible,
		5056	"warn-free" code is not a goal, and it is recommended not to build libev
		5057	with any compiler warnings enabled unless you are prepared to cope with
		5058	them (e.g. by ignoring them). Remember that warnings are just that:
		5059	warnings, not errors, or proof of bugs.
3143		5060
3144	This means that, when you have a watcher that triggers in one hour and
3145	there are 100 watchers that would trigger before that then inserting will
3146	have to skip roughly seven (C<ld 100>) of these watchers.
3147		5061
3148	=item Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)	5062	=head2 VALGRIND
3149		5063
3150	That means that changing a timer costs less than removing/adding them	5064	Valgrind has a special section here because it is a popular tool that is
3151	as only the relative motion in the event queue has to be paid for.	5065	highly useful. Unfortunately, valgrind reports are very hard to interpret.
3152		5066
3153	=item Starting io/check/prepare/idle/signal/child/fork/async watchers: O(1)	5067	If you think you found a bug (memory leak, uninitialised data access etc.)
		5068	in libev, then check twice: If valgrind reports something like:
3154		5069
3155	These just add the watcher into an array or at the head of a list.	5070	==2274== definitely lost: 0 bytes in 0 blocks.
		5071	==2274== possibly lost: 0 bytes in 0 blocks.
		5072	==2274== still reachable: 256 bytes in 1 blocks.
3156		5073
3157	=item Stopping check/prepare/idle/fork/async watchers: O(1)	5074	Then there is no memory leak, just as memory accounted to global variables
		5075	is not a memleak - the memory is still being referenced, and didn't leak.
3158		5076
3159	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))	5077	Similarly, under some circumstances, valgrind might report kernel bugs
		5078	as if it were a bug in libev (e.g. in realloc or in the poll backend,
		5079	although an acceptable workaround has been found here), or it might be
		5080	confused.
3160		5081
3161	These watchers are stored in lists then need to be walked to find the	5082	Keep in mind that valgrind is a very good tool, but only a tool. Don't
3162	correct watcher to remove. The lists are usually short (you don't usually	5083	make it into some kind of religion.
3163	have many watchers waiting for the same fd or signal).
3164		5084
3165	=item Finding the next timer in each loop iteration: O(1)	5085	If you are unsure about something, feel free to contact the mailing list
		5086	with the full valgrind report and an explanation on why you think this
		5087	is a bug in libev (best check the archives, too :). However, don't be
		5088	annoyed when you get a brisk "this is no bug" answer and take the chance
		5089	of learning how to interpret valgrind properly.
3166		5090
3167	By virtue of using a binary heap, the next timer is always found at the	5091	If you need, for some reason, empty reports from valgrind for your project
3168	beginning of the storage array.	5092	I suggest using suppression lists.
3169		5093
3170	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
3171		5094
3172	A change means an I/O watcher gets started or stopped, which requires	5095	=head1 PORTABILITY NOTES
3173	libev to recalculate its status (and possibly tell the kernel, depending
3174	on backend and wether C<ev_io_set> was used).
3175		5096
3176	=item Activating one watcher (putting it into the pending state): O(1)	5097	=head2 GNU/LINUX 32 BIT LIMITATIONS
3177		5098
3178	=item Priority handling: O(number_of_priorities)	5099	GNU/Linux is the only common platform that supports 64 bit file/large file
		5100	interfaces but I<disables> them by default.
3179		5101
3180	Priorities are implemented by allocating some space for each	5102	That means that libev compiled in the default environment doesn't support
3181	priority. When doing priority-based operations, libev usually has to	5103	files larger than 2GiB or so, which mainly affects C<ev_stat> watchers.
3182	linearly search all the priorities, but starting/stopping and activating
3183	watchers becomes O(1) w.r.t. priority handling.
3184		5104
3185	=item Sending an ev_async: O(1)	5105	Unfortunately, many programs try to work around this GNU/Linux issue
		5106	by enabling the large file API, which makes them incompatible with the
		5107	standard libev compiled for their system.
3186		5108
3187	=item Processing ev_async_send: O(number_of_async_watchers)	5109	Likewise, libev cannot enable the large file API itself as this would
		5110	suddenly make it incompatible to the default compile time environment,
		5111	i.e. all programs not using special compile switches.
3188		5112
3189	=item Processing signals: O(max_signal_number)	5113	=head2 OS/X AND DARWIN BUGS
3190		5114
3191	Sending involves a syscall I<iff> there were no other C<ev_async_send>	5115	The whole thing is a bug if you ask me - basically any system interface
3192	calls in the current loop iteration. Checking for async and signal events	5116	you touch is broken, whether it is locales, poll, kqueue or even the
3193	involves iterating over all running async watchers or all signal numbers.	5117	OpenGL drivers.
3194		5118
3195	=back	5119	=head3 C<kqueue> is buggy
3196		5120
		5121	The kqueue syscall is broken in all known versions - most versions support
		5122	only sockets, many support pipes.
3197		5123
3198	=head1 Win32 platform limitations and workarounds	5124	Libev tries to work around this by not using C<kqueue> by default on this
		5125	rotten platform, but of course you can still ask for it when creating a
		5126	loop - embedding a socket-only kqueue loop into a select-based one is
		5127	probably going to work well.
		5128
		5129	=head3 C<poll> is buggy
		5130
		5131	Instead of fixing C<kqueue>, Apple replaced their (working) C<poll>
		5132	implementation by something calling C<kqueue> internally around the 10.5.6
		5133	release, so now C<kqueue> I<and> C<poll> are broken.
		5134
		5135	Libev tries to work around this by not using C<poll> by default on
		5136	this rotten platform, but of course you can still ask for it when creating
		5137	a loop.
		5138
		5139	=head3 C<select> is buggy
		5140
		5141	All that's left is C<select>, and of course Apple found a way to fuck this
		5142	one up as well: On OS/X, C<select> actively limits the number of file
		5143	descriptors you can pass in to 1024 - your program suddenly crashes when
		5144	you use more.
		5145
		5146	There is an undocumented "workaround" for this - defining
		5147	C<_DARWIN_UNLIMITED_SELECT>, which libev tries to use, so select I<should>
		5148	work on OS/X.
		5149
		5150	=head2 SOLARIS PROBLEMS AND WORKAROUNDS
		5151
		5152	=head3 C<errno> reentrancy
		5153
		5154	The default compile environment on Solaris is unfortunately so
		5155	thread-unsafe that you can't even use components/libraries compiled
		5156	without C<-D_REENTRANT> in a threaded program, which, of course, isn't
		5157	defined by default. A valid, if stupid, implementation choice.
		5158
		5159	If you want to use libev in threaded environments you have to make sure
		5160	it's compiled with C<_REENTRANT> defined.
		5161
		5162	=head3 Event port backend
		5163
		5164	The scalable event interface for Solaris is called "event
		5165	ports". Unfortunately, this mechanism is very buggy in all major
		5166	releases. If you run into high CPU usage, your program freezes or you get
		5167	a large number of spurious wakeups, make sure you have all the relevant
		5168	and latest kernel patches applied. No, I don't know which ones, but there
		5169	are multiple ones to apply, and afterwards, event ports actually work
		5170	great.
		5171
		5172	If you can't get it to work, you can try running the program by setting
		5173	the environment variable C<LIBEV_FLAGS=3> to only allow C<poll> and
		5174	C<select> backends.
		5175
		5176	=head2 AIX POLL BUG
		5177
		5178	AIX unfortunately has a broken C<poll.h> header. Libev works around
		5179	this by trying to avoid the poll backend altogether (i.e. it's not even
		5180	compiled in), which normally isn't a big problem as C<select> works fine
		5181	with large bitsets on AIX, and AIX is dead anyway.
		5182
		5183	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
		5184
		5185	=head3 General issues
3199		5186
3200	Win32 doesn't support any of the standards (e.g. POSIX) that libev	5187	Win32 doesn't support any of the standards (e.g. POSIX) that libev
3201	requires, and its I/O model is fundamentally incompatible with the POSIX	5188	requires, and its I/O model is fundamentally incompatible with the POSIX
3202	model. Libev still offers limited functionality on this platform in	5189	model. Libev still offers limited functionality on this platform in
3203	the form of the C<EVBACKEND_SELECT> backend, and only supports socket	5190	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
3204	descriptors. This only applies when using Win32 natively, not when using	5191	descriptors. This only applies when using Win32 natively, not when using
3205	e.g. cygwin.	5192	e.g. cygwin. Actually, it only applies to the microsofts own compilers,
		5193	as every compiler comes with a slightly differently broken/incompatible
		5194	environment.
		5195
		5196	Lifting these limitations would basically require the full
		5197	re-implementation of the I/O system. If you are into this kind of thing,
		5198	then note that glib does exactly that for you in a very portable way (note
		5199	also that glib is the slowest event library known to man).
3206		5200
3207	There is no supported compilation method available on windows except	5201	There is no supported compilation method available on windows except
3208	embedding it into other applications.	5202	embedding it into other applications.
3209		5203
		5204	Sensible signal handling is officially unsupported by Microsoft - libev
		5205	tries its best, but under most conditions, signals will simply not work.
		5206
		5207	Not a libev limitation but worth mentioning: windows apparently doesn't
		5208	accept large writes: instead of resulting in a partial write, windows will
		5209	either accept everything or return C<ENOBUFS> if the buffer is too large,
		5210	so make sure you only write small amounts into your sockets (less than a
		5211	megabyte seems safe, but this apparently depends on the amount of memory
		5212	available).
		5213
3210	Due to the many, low, and arbitrary limits on the win32 platform and the	5214	Due to the many, low, and arbitrary limits on the win32 platform and
3211	abysmal performance of winsockets, using a large number of sockets is not	5215	the abysmal performance of winsockets, using a large number of sockets
3212	recommended (and not reasonable). If your program needs to use more than	5216	is not recommended (and not reasonable). If your program needs to use
3213	a hundred or so sockets, then likely it needs to use a totally different	5217	more than a hundred or so sockets, then likely it needs to use a totally
3214	implementation for windows, as libev offers the POSIX model, which cannot	5218	different implementation for windows, as libev offers the POSIX readiness
3215	be implemented efficiently on windows (microsoft monopoly games).	5219	notification model, which cannot be implemented efficiently on windows
		5220	(due to Microsoft monopoly games).
3216		5221
3217	=over 4	5222	A typical way to use libev under windows is to embed it (see the embedding
		5223	section for details) and use the following F<evwrap.h> header file instead
		5224	of F<ev.h>:
3218		5225
		5226	#define EV_STANDALONE /* keeps ev from requiring config.h */
		5227	#define EV_SELECT_IS_WINSOCKET 1 /* configure libev for windows select */
		5228
		5229	#include "ev.h"
		5230
		5231	And compile the following F<evwrap.c> file into your project (make sure
		5232	you do I<not> compile the F<ev.c> or any other embedded source files!):
		5233
		5234	#include "evwrap.h"
		5235	#include "ev.c"
		5236
3219	=item The winsocket select function	5237	=head3 The winsocket C<select> function
3220		5238
3221	The winsocket C<select> function doesn't follow POSIX in that it requires	5239	The winsocket C<select> function doesn't follow POSIX in that it
3222	socket I<handles> and not socket I<file descriptors>. This makes select	5240	requires socket I<handles> and not socket I<file descriptors> (it is
3223	very inefficient, and also requires a mapping from file descriptors	5241	also extremely buggy). This makes select very inefficient, and also
3224	to socket handles. See the discussion of the C<EV_SELECT_USE_FD_SET>,	5242	requires a mapping from file descriptors to socket handles (the Microsoft
3225	C<EV_SELECT_IS_WINSOCKET> and C<EV_FD_TO_WIN32_HANDLE> preprocessor	5243	C runtime provides the function C<_open_osfhandle> for this). See the
3226	symbols for more info.	5244	discussion of the C<EV_SELECT_USE_FD_SET>, C<EV_SELECT_IS_WINSOCKET> and
		5245	C<EV_FD_TO_WIN32_HANDLE> preprocessor symbols for more info.
3227		5246
3228	The configuration for a "naked" win32 using the microsoft runtime	5247	The configuration for a "naked" win32 using the Microsoft runtime
3229	libraries and raw winsocket select is:	5248	libraries and raw winsocket select is:
3230		5249
3231	#define EV_USE_SELECT 1	5250	#define EV_USE_SELECT 1
3232	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */	5251	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
3233		5252
3234	Note that winsockets handling of fd sets is O(n), so you can easily get a	5253	Note that winsockets handling of fd sets is O(n), so you can easily get a
3235	complexity in the O(n²) range when using win32.	5254	complexity in the O(n²) range when using win32.
3236		5255
3237	=item Limited number of file descriptors	5256	=head3 Limited number of file descriptors
3238		5257
3239	Windows has numerous arbitrary (and low) limits on things. Early versions	5258	Windows has numerous arbitrary (and low) limits on things.
3240	of winsocket's select only supported waiting for a max. of C<64> handles	5259
		5260	Early versions of winsocket's select only supported waiting for a maximum
3241	(probably owning to the fact that all windows kernels can only wait for	5261	of C<64> handles (probably owning to the fact that all windows kernels
3242	C<64> things at the same time internally; microsoft recommends spawning a	5262	can only wait for C<64> things at the same time internally; Microsoft
3243	chain of threads and wait for 63 handles and the previous thread in each).	5263	recommends spawning a chain of threads and wait for 63 handles and the
		5264	previous thread in each. Sounds great!).
3244		5265
3245	Newer versions support more handles, but you need to define C<FD_SETSIZE>	5266	Newer versions support more handles, but you need to define C<FD_SETSIZE>
3246	to some high number (e.g. C<2048>) before compiling the winsocket select	5267	to some high number (e.g. C<2048>) before compiling the winsocket select
3247	call (which might be in libev or elsewhere, for example, perl does its own	5268	call (which might be in libev or elsewhere, for example, perl and many
3248	select emulation on windows).	5269	other interpreters do their own select emulation on windows).
3249		5270
3250	Another limit is the number of file descriptors in the microsoft runtime	5271	Another limit is the number of file descriptors in the Microsoft runtime
3251	libraries, which by default is C<64> (there must be a hidden I<64> fetish	5272	libraries, which by default is C<64> (there must be a hidden I<64>
3252	or something like this inside microsoft). You can increase this by calling	5273	fetish or something like this inside Microsoft). You can increase this
3253	C<_setmaxstdio>, which can increase this limit to C<2048> (another	5274	by calling C<_setmaxstdio>, which can increase this limit to C<2048>
3254	arbitrary limit), but is broken in many versions of the microsoft runtime	5275	(another arbitrary limit), but is broken in many versions of the Microsoft
3255	libraries.
3256
3257	This might get you to about C<512> or C<2048> sockets (depending on	5276	runtime libraries. This might get you to about C<512> or C<2048> sockets
3258	windows version and/or the phase of the moon). To get more, you need to	5277	(depending on windows version and/or the phase of the moon). To get more,
3259	wrap all I/O functions and provide your own fd management, but the cost of	5278	you need to wrap all I/O functions and provide your own fd management, but
3260	calling select (O(n²)) will likely make this unworkable.	5279	the cost of calling select (O(n²)) will likely make this unworkable.
3261		5280
3262	=back
3263
3264
3265	=head1 PORTABILITY REQUIREMENTS	5281	=head2 PORTABILITY REQUIREMENTS
3266		5282
3267	In addition to a working ISO-C implementation, libev relies on a few	5283	In addition to a working ISO-C implementation and of course the
3268	additional extensions:	5284	backend-specific APIs, libev relies on a few additional extensions:
3269		5285
3270	=over 4	5286	=over 4
3271		5287
		5288	=item C<void (*)(ev_watcher_type *, int revents)> must have compatible
		5289	calling conventions regardless of C<ev_watcher_type *>.
		5290
		5291	Libev assumes not only that all watcher pointers have the same internal
		5292	structure (guaranteed by POSIX but not by ISO C for example), but it also
		5293	assumes that the same (machine) code can be used to call any watcher
		5294	callback: The watcher callbacks have different type signatures, but libev
		5295	calls them using an C<ev_watcher *> internally.
		5296
		5297	=item pointer accesses must be thread-atomic
		5298
		5299	Accessing a pointer value must be atomic, it must both be readable and
		5300	writable in one piece - this is the case on all current architectures.
		5301
3272	=item C<sig_atomic_t volatile> must be thread-atomic as well	5302	=item C<sig_atomic_t volatile> must be thread-atomic as well
3273		5303
3274	The type C<sig_atomic_t volatile> (or whatever is defined as	5304	The type C<sig_atomic_t volatile> (or whatever is defined as
3275	C<EV_ATOMIC_T>) must be atomic w.r.t. accesses from different	5305	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different
3276	threads. This is not part of the specification for C<sig_atomic_t>, but is	5306	threads. This is not part of the specification for C<sig_atomic_t>, but is
3277	believed to be sufficiently portable.	5307	believed to be sufficiently portable.
3278		5308
3279	=item C<sigprocmask> must work in a threaded environment	5309	=item C<sigprocmask> must work in a threaded environment
3280		5310
…		…
3284	thread" or will block signals process-wide, both behaviours would	5314	thread" or will block signals process-wide, both behaviours would
3285	be compatible with libev. Interaction between C<sigprocmask> and	5315	be compatible with libev. Interaction between C<sigprocmask> and
3286	C<pthread_sigmask> could complicate things, however.	5316	C<pthread_sigmask> could complicate things, however.
3287		5317
3288	The most portable way to handle signals is to block signals in all threads	5318	The most portable way to handle signals is to block signals in all threads
3289	except the initial one, and run the default loop in the initial thread as	5319	except the initial one, and run the signal handling loop in the initial
3290	well.	5320	thread as well.
		5321
		5322	=item C<long> must be large enough for common memory allocation sizes
		5323
		5324	To improve portability and simplify its API, libev uses C<long> internally
		5325	instead of C<size_t> when allocating its data structures. On non-POSIX
		5326	systems (Microsoft...) this might be unexpectedly low, but is still at
		5327	least 31 bits everywhere, which is enough for hundreds of millions of
		5328	watchers.
		5329
		5330	=item C<double> must hold a time value in seconds with enough accuracy
		5331
		5332	The type C<double> is used to represent timestamps. It is required to
		5333	have at least 51 bits of mantissa (and 9 bits of exponent), which is
		5334	good enough for at least into the year 4000 with millisecond accuracy
		5335	(the design goal for libev). This requirement is overfulfilled by
		5336	implementations using IEEE 754, which is basically all existing ones.
		5337
		5338	With IEEE 754 doubles, you get microsecond accuracy until at least the
		5339	year 2255 (and millisecond accuracy till the year 287396 - by then, libev
		5340	is either obsolete or somebody patched it to use C<long double> or
		5341	something like that, just kidding).
3291		5342
3292	=back	5343	=back
3293		5344
3294	If you know of other additional requirements drop me a note.	5345	If you know of other additional requirements drop me a note.
3295		5346
3296		5347
		5348	=head1 ALGORITHMIC COMPLEXITIES
		5349
		5350	In this section the complexities of (many of) the algorithms used inside
		5351	libev will be documented. For complexity discussions about backends see
		5352	the documentation for C<ev_default_init>.
		5353
		5354	All of the following are about amortised time: If an array needs to be
		5355	extended, libev needs to realloc and move the whole array, but this
		5356	happens asymptotically rarer with higher number of elements, so O(1) might
		5357	mean that libev does a lengthy realloc operation in rare cases, but on
		5358	average it is much faster and asymptotically approaches constant time.
		5359
		5360	=over 4
		5361
		5362	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)
		5363
		5364	This means that, when you have a watcher that triggers in one hour and
		5365	there are 100 watchers that would trigger before that, then inserting will
		5366	have to skip roughly seven (C<ld 100>) of these watchers.
		5367
		5368	=item Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)
		5369
		5370	That means that changing a timer costs less than removing/adding them,
		5371	as only the relative motion in the event queue has to be paid for.
		5372
		5373	=item Starting io/check/prepare/idle/signal/child/fork/async watchers: O(1)
		5374
		5375	These just add the watcher into an array or at the head of a list.
		5376
		5377	=item Stopping check/prepare/idle/fork/async watchers: O(1)
		5378
		5379	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
		5380
		5381	These watchers are stored in lists, so they need to be walked to find the
		5382	correct watcher to remove. The lists are usually short (you don't usually
		5383	have many watchers waiting for the same fd or signal: one is typical, two
		5384	is rare).
		5385
		5386	=item Finding the next timer in each loop iteration: O(1)
		5387
		5388	By virtue of using a binary or 4-heap, the next timer is always found at a
		5389	fixed position in the storage array.
		5390
		5391	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
		5392
		5393	A change means an I/O watcher gets started or stopped, which requires
		5394	libev to recalculate its status (and possibly tell the kernel, depending
		5395	on backend and whether C<ev_io_set> was used).
		5396
		5397	=item Activating one watcher (putting it into the pending state): O(1)
		5398
		5399	=item Priority handling: O(number_of_priorities)
		5400
		5401	Priorities are implemented by allocating some space for each
		5402	priority. When doing priority-based operations, libev usually has to
		5403	linearly search all the priorities, but starting/stopping and activating
		5404	watchers becomes O(1) with respect to priority handling.
		5405
		5406	=item Sending an ev_async: O(1)
		5407
		5408	=item Processing ev_async_send: O(number_of_async_watchers)
		5409
		5410	=item Processing signals: O(max_signal_number)
		5411
		5412	Sending involves a system call I<iff> there were no other C<ev_async_send>
		5413	calls in the current loop iteration and the loop is currently
		5414	blocked. Checking for async and signal events involves iterating over all
		5415	running async watchers or all signal numbers.
		5416
		5417	=back
		5418
		5419
		5420	=head1 PORTING FROM LIBEV 3.X TO 4.X
		5421
		5422	The major version 4 introduced some incompatible changes to the API.
		5423
		5424	At the moment, the C<ev.h> header file provides compatibility definitions
		5425	for all changes, so most programs should still compile. The compatibility
		5426	layer might be removed in later versions of libev, so better update to the
		5427	new API early than late.
		5428
		5429	=over 4
		5430
		5431	=item C<EV_COMPAT3> backwards compatibility mechanism
		5432
		5433	The backward compatibility mechanism can be controlled by
		5434	C<EV_COMPAT3>. See L</"PREPROCESSOR SYMBOLS/MACROS"> in the L</EMBEDDING>
		5435	section.
		5436
		5437	=item C<ev_default_destroy> and C<ev_default_fork> have been removed
		5438
		5439	These calls can be replaced easily by their C<ev_loop_xxx> counterparts:
		5440
		5441	ev_loop_destroy (EV_DEFAULT_UC);
		5442	ev_loop_fork (EV_DEFAULT);
		5443
		5444	=item function/symbol renames
		5445
		5446	A number of functions and symbols have been renamed:
		5447
		5448	ev_loop => ev_run
		5449	EVLOOP_NONBLOCK => EVRUN_NOWAIT
		5450	EVLOOP_ONESHOT => EVRUN_ONCE
		5451
		5452	ev_unloop => ev_break
		5453	EVUNLOOP_CANCEL => EVBREAK_CANCEL
		5454	EVUNLOOP_ONE => EVBREAK_ONE
		5455	EVUNLOOP_ALL => EVBREAK_ALL
		5456
		5457	EV_TIMEOUT => EV_TIMER
		5458
		5459	ev_loop_count => ev_iteration
		5460	ev_loop_depth => ev_depth
		5461	ev_loop_verify => ev_verify
		5462
		5463	Most functions working on C<struct ev_loop> objects don't have an
		5464	C<ev_loop_> prefix, so it was removed; C<ev_loop>, C<ev_unloop> and
		5465	associated constants have been renamed to not collide with the C<struct
		5466	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme
		5467	as all other watcher types. Note that C<ev_loop_fork> is still called
		5468	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>
		5469	typedef.
		5470
		5471	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>
		5472
		5473	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different
		5474	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile
		5475	and work, but the library code will of course be larger.
		5476
		5477	=back
		5478
		5479
		5480	=head1 GLOSSARY
		5481
		5482	=over 4
		5483
		5484	=item active
		5485
		5486	A watcher is active as long as it has been started and not yet stopped.
		5487	See L</WATCHER STATES> for details.
		5488
		5489	=item application
		5490
		5491	In this document, an application is whatever is using libev.
		5492
		5493	=item backend
		5494
		5495	The part of the code dealing with the operating system interfaces.
		5496
		5497	=item callback
		5498
		5499	The address of a function that is called when some event has been
		5500	detected. Callbacks are being passed the event loop, the watcher that
		5501	received the event, and the actual event bitset.
		5502
		5503	=item callback/watcher invocation
		5504
		5505	The act of calling the callback associated with a watcher.
		5506
		5507	=item event
		5508
		5509	A change of state of some external event, such as data now being available
		5510	for reading on a file descriptor, time having passed or simply not having
		5511	any other events happening anymore.
		5512
		5513	In libev, events are represented as single bits (such as C<EV_READ> or
		5514	C<EV_TIMER>).
		5515
		5516	=item event library
		5517
		5518	A software package implementing an event model and loop.
		5519
		5520	=item event loop
		5521
		5522	An entity that handles and processes external events and converts them
		5523	into callback invocations.
		5524
		5525	=item event model
		5526
		5527	The model used to describe how an event loop handles and processes
		5528	watchers and events.
		5529
		5530	=item pending
		5531
		5532	A watcher is pending as soon as the corresponding event has been
		5533	detected. See L</WATCHER STATES> for details.
		5534
		5535	=item real time
		5536
		5537	The physical time that is observed. It is apparently strictly monotonic :)
		5538
		5539	=item wall-clock time
		5540
		5541	The time and date as shown on clocks. Unlike real time, it can actually
		5542	be wrong and jump forwards and backwards, e.g. when you adjust your
		5543	clock.
		5544
		5545	=item watcher
		5546
		5547	A data structure that describes interest in certain events. Watchers need
		5548	to be started (attached to an event loop) before they can receive events.
		5549
		5550	=back
		5551
3297	=head1 AUTHOR	5552	=head1 AUTHOR
3298		5553
3299	Marc Lehmann <libev@schmorp.de>.	5554	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael
		5555	Magnusson and Emanuele Giaquinta, and minor corrections by many others.
3300		5556

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines