[ViewVC] Diff of: cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.114 by root, Mon Dec 31 01:31:30 2007 UTC vs.
Revision 1.156 by root, Tue May 20 20:00:34 2008 UTC

…		…
6		6
7	#include <ev.h>	7	#include <ev.h>
8		8
9	=head2 EXAMPLE PROGRAM	9	=head2 EXAMPLE PROGRAM
10		10
		11	// a single header file is required
11	#include <ev.h>	12	#include <ev.h>
12		13
		14	// every watcher type has its own typedef'd struct
		15	// with the name ev_<type>
13	ev_io stdin_watcher;	16	ev_io stdin_watcher;
14	ev_timer timeout_watcher;	17	ev_timer timeout_watcher;
15		18
		19	// all watcher callbacks have a similar signature
16	/* called when data readable on stdin */	20	// this callback is called when data is readable on stdin
17	static void	21	static void
18	stdin_cb (EV_P_ struct ev_io *w, int revents)	22	stdin_cb (EV_P_ struct ev_io *w, int revents)
19	{	23	{
20	/* puts ("stdin ready"); */	24	puts ("stdin ready");
21	ev_io_stop (EV_A_ w); /* just a syntax example */	25	// for one-shot events, one must manually stop the watcher
22	ev_unloop (EV_A_ EVUNLOOP_ALL); /* leave all loop calls */	26	// with its corresponding stop function.
		27	ev_io_stop (EV_A_ w);
		28
		29	// this causes all nested ev_loop's to stop iterating
		30	ev_unloop (EV_A_ EVUNLOOP_ALL);
23	}	31	}
24		32
		33	// another callback, this time for a time-out
25	static void	34	static void
26	timeout_cb (EV_P_ struct ev_timer *w, int revents)	35	timeout_cb (EV_P_ struct ev_timer *w, int revents)
27	{	36	{
28	/* puts ("timeout"); */	37	puts ("timeout");
29	ev_unloop (EV_A_ EVUNLOOP_ONE); /* leave one loop call */	38	// this causes the innermost ev_loop to stop iterating
		39	ev_unloop (EV_A_ EVUNLOOP_ONE);
30	}	40	}
31		41
32	int	42	int
33	main (void)	43	main (void)
34	{	44	{
		45	// use the default event loop unless you have special needs
35	struct ev_loop *loop = ev_default_loop (0);	46	struct ev_loop *loop = ev_default_loop (0);
36		47
37	/* initialise an io watcher, then start it */	48	// initialise an io watcher, then start it
		49	// this one will watch for stdin to become readable
38	ev_io_init (&stdin_watcher, stdin_cb, /STDIN_FILENO/ 0, EV_READ);	50	ev_io_init (&stdin_watcher, stdin_cb, /STDIN_FILENO/ 0, EV_READ);
39	ev_io_start (loop, &stdin_watcher);	51	ev_io_start (loop, &stdin_watcher);
40		52
		53	// initialise a timer watcher, then start it
41	/* simple non-repeating 5.5 second timeout */	54	// simple non-repeating 5.5 second timeout
42	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	55	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
43	ev_timer_start (loop, &timeout_watcher);	56	ev_timer_start (loop, &timeout_watcher);
44		57
45	/* loop till timeout or data ready */	58	// now wait for events to arrive
46	ev_loop (loop, 0);	59	ev_loop (loop, 0);
47		60
		61	// unloop was called, so exit
48	return 0;	62	return 0;
49	}	63	}
50		64
51	=head1 DESCRIPTION	65	=head1 DESCRIPTION
52		66
53	The newest version of this document is also available as a html-formatted	67	The newest version of this document is also available as an html-formatted
54	web page you might find easier to navigate when reading it for the first	68	web page you might find easier to navigate when reading it for the first
55	time: L<http://cvs.schmorp.de/libev/ev.html>.	69	time: L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.
56		70
57	Libev is an event loop: you register interest in certain events (such as a	71	Libev is an event loop: you register interest in certain events (such as a
58	file descriptor being readable or a timeout occurring), and it will manage	72	file descriptor being readable or a timeout occurring), and it will manage
59	these event sources and provide your program with events.	73	these event sources and provide your program with events.
60		74
…		…
84	L<benchmark\|http://libev.schmorp.de/bench.html> comparing it to libevent	98	L<benchmark\|http://libev.schmorp.de/bench.html> comparing it to libevent
85	for example).	99	for example).
86		100
87	=head2 CONVENTIONS	101	=head2 CONVENTIONS
88		102
89	Libev is very configurable. In this manual the default configuration will	103	Libev is very configurable. In this manual the default (and most common)
90	be described, which supports multiple event loops. For more info about	104	configuration will be described, which supports multiple event loops. For
91	various configuration options please have a look at B<EMBED> section in	105	more info about various configuration options please have a look at
92	this manual. If libev was configured without support for multiple event	106	B<EMBED> section in this manual. If libev was configured without support
93	loops, then all functions taking an initial argument of name C<loop>	107	for multiple event loops, then all functions taking an initial argument of
94	(which is always of type C<struct ev_loop *>) will not have this argument.	108	name C<loop> (which is always of type C<struct ev_loop *>) will not have
		109	this argument.
95		110
96	=head2 TIME REPRESENTATION	111	=head2 TIME REPRESENTATION
97		112
98	Libev represents time as a single floating point number, representing the	113	Libev represents time as a single floating point number, representing the
99	(fractional) number of seconds since the (POSIX) epoch (somewhere near	114	(fractional) number of seconds since the (POSIX) epoch (somewhere near
…		…
181	See the description of C<ev_embed> watchers for more info.	196	See the description of C<ev_embed> watchers for more info.
182		197
183	=item ev_set_allocator (void (cb)(void *ptr, long size))	198	=item ev_set_allocator (void (cb)(void *ptr, long size))
184		199
185	Sets the allocation function to use (the prototype is similar - the	200	Sets the allocation function to use (the prototype is similar - the
186	semantics is identical - to the realloc C function). It is used to	201	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
187	allocate and free memory (no surprises here). If it returns zero when	202	used to allocate and free memory (no surprises here). If it returns zero
188	memory needs to be allocated, the library might abort or take some	203	when memory needs to be allocated (C<size != 0>), the library might abort
189	potentially destructive action. The default is your system realloc	204	or take some potentially destructive action.
190	function.	205
		206	Since some systems (at least OpenBSD and Darwin) fail to implement
		207	correct C<realloc> semantics, libev will use a wrapper around the system
		208	C<realloc> and C<free> functions by default.
191		209
192	You could override this function in high-availability programs to, say,	210	You could override this function in high-availability programs to, say,
193	free some memory if it cannot allocate memory, to use a special allocator,	211	free some memory if it cannot allocate memory, to use a special allocator,
194	or even to sleep a while and retry until some memory is available.	212	or even to sleep a while and retry until some memory is available.
195		213
196	Example: Replace the libev allocator with one that waits a bit and then	214	Example: Replace the libev allocator with one that waits a bit and then
197	retries).	215	retries (example requires a standards-compliant C<realloc>).
198		216
199	static void *	217	static void *
200	persistent_realloc (void *ptr, size_t size)	218	persistent_realloc (void *ptr, size_t size)
201	{	219	{
202	for (;;)	220	for (;;)
…		…
241		259
242	An event loop is described by a C<struct ev_loop *>. The library knows two	260	An event loop is described by a C<struct ev_loop *>. The library knows two
243	types of such loops, the I<default> loop, which supports signals and child	261	types of such loops, the I<default> loop, which supports signals and child
244	events, and dynamically created loops which do not.	262	events, and dynamically created loops which do not.
245		263
246	If you use threads, a common model is to run the default event loop
247	in your main thread (or in a separate thread) and for each thread you
248	create, you also create another event loop. Libev itself does no locking
249	whatsoever, so if you mix calls to the same event loop in different
250	threads, make sure you lock (this is usually a bad idea, though, even if
251	done correctly, because it's hideous and inefficient).
252
253	=over 4	264	=over 4
254		265
255	=item struct ev_loop *ev_default_loop (unsigned int flags)	266	=item struct ev_loop *ev_default_loop (unsigned int flags)
256		267
257	This will initialise the default event loop if it hasn't been initialised	268	This will initialise the default event loop if it hasn't been initialised
…		…
259	false. If it already was initialised it simply returns it (and ignores the	270	false. If it already was initialised it simply returns it (and ignores the
260	flags. If that is troubling you, check C<ev_backend ()> afterwards).	271	flags. If that is troubling you, check C<ev_backend ()> afterwards).
261		272
262	If you don't know what event loop to use, use the one returned from this	273	If you don't know what event loop to use, use the one returned from this
263	function.	274	function.
		275
		276	Note that this function is I<not> thread-safe, so if you want to use it
		277	from multiple threads, you have to lock (note also that this is unlikely,
		278	as loops cannot bes hared easily between threads anyway).
		279
		280	The default loop is the only loop that can handle C<ev_signal> and
		281	C<ev_child> watchers, and to do this, it always registers a handler
		282	for C<SIGCHLD>. If this is a problem for your app you can either
		283	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you
		284	can simply overwrite the C<SIGCHLD> signal handler I<after> calling
		285	C<ev_default_init>.
264		286
265	The flags argument can be used to specify special behaviour or specific	287	The flags argument can be used to specify special behaviour or specific
266	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	288	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
267		289
268	The following flags are supported:	290	The following flags are supported:
…		…
290	enabling this flag.	312	enabling this flag.
291		313
292	This works by calling C<getpid ()> on every iteration of the loop,	314	This works by calling C<getpid ()> on every iteration of the loop,
293	and thus this might slow down your event loop if you do a lot of loop	315	and thus this might slow down your event loop if you do a lot of loop
294	iterations and little real work, but is usually not noticeable (on my	316	iterations and little real work, but is usually not noticeable (on my
295	Linux system for example, C<getpid> is actually a simple 5-insn sequence	317	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence
296	without a syscall and thus I<very> fast, but my Linux system also has	318	without a syscall and thus I<very> fast, but my GNU/Linux system also has
297	C<pthread_atfork> which is even faster).	319	C<pthread_atfork> which is even faster).
298		320
299	The big advantage of this flag is that you can forget about fork (and	321	The big advantage of this flag is that you can forget about fork (and
300	forget about forgetting to tell libev about forking) when you use this	322	forget about forgetting to tell libev about forking) when you use this
301	flag.	323	flag.
…		…
314	To get good performance out of this backend you need a high amount of	336	To get good performance out of this backend you need a high amount of
315	parallelity (most of the file descriptors should be busy). If you are	337	parallelity (most of the file descriptors should be busy). If you are
316	writing a server, you should C<accept ()> in a loop to accept as many	338	writing a server, you should C<accept ()> in a loop to accept as many
317	connections as possible during one iteration. You might also want to have	339	connections as possible during one iteration. You might also want to have
318	a look at C<ev_set_io_collect_interval ()> to increase the amount of	340	a look at C<ev_set_io_collect_interval ()> to increase the amount of
319	readyness notifications you get per iteration.	341	readiness notifications you get per iteration.
320		342
321	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)	343	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)
322		344
323	And this is your standard poll(2) backend. It's more complicated	345	And this is your standard poll(2) backend. It's more complicated
324	than select, but handles sparse fds better and has no artificial	346	than select, but handles sparse fds better and has no artificial
…		…
332	For few fds, this backend is a bit little slower than poll and select,	354	For few fds, this backend is a bit little slower than poll and select,
333	but it scales phenomenally better. While poll and select usually scale	355	but it scales phenomenally better. While poll and select usually scale
334	like O(total_fds) where n is the total number of fds (or the highest fd),	356	like O(total_fds) where n is the total number of fds (or the highest fd),
335	epoll scales either O(1) or O(active_fds). The epoll design has a number	357	epoll scales either O(1) or O(active_fds). The epoll design has a number
336	of shortcomings, such as silently dropping events in some hard-to-detect	358	of shortcomings, such as silently dropping events in some hard-to-detect
337	cases and rewiring a syscall per fd change, no fork support and bad	359	cases and requiring a syscall per fd change, no fork support and bad
338	support for dup.	360	support for dup.
339		361
340	While stopping, setting and starting an I/O watcher in the same iteration	362	While stopping, setting and starting an I/O watcher in the same iteration
341	will result in some caching, there is still a syscall per such incident	363	will result in some caching, there is still a syscall per such incident
342	(because the fd could point to a different file description now), so its	364	(because the fd could point to a different file description now), so its
…		…
403	While this backend scales well, it requires one system call per active	425	While this backend scales well, it requires one system call per active
404	file descriptor per loop iteration. For small and medium numbers of file	426	file descriptor per loop iteration. For small and medium numbers of file
405	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend	427	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
406	might perform better.	428	might perform better.
407		429
		430	On the positive side, ignoring the spurious readiness notifications, this
		431	backend actually performed to specification in all tests and is fully
		432	embeddable, which is a rare feat among the OS-specific backends.
		433
408	=item C<EVBACKEND_ALL>	434	=item C<EVBACKEND_ALL>
409		435
410	Try all backends (even potentially broken ones that wouldn't be tried	436	Try all backends (even potentially broken ones that wouldn't be tried
411	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	437	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
412	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	438	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
…		…
414	It is definitely not recommended to use this flag.	440	It is definitely not recommended to use this flag.
415		441
416	=back	442	=back
417		443
418	If one or more of these are ored into the flags value, then only these	444	If one or more of these are ored into the flags value, then only these
419	backends will be tried (in the reverse order as given here). If none are	445	backends will be tried (in the reverse order as listed here). If none are
420	specified, most compiled-in backend will be tried, usually in reverse	446	specified, all backends in C<ev_recommended_backends ()> will be tried.
421	order of their flag values :)
422		447
423	The most typical usage is like this:	448	The most typical usage is like this:
424		449
425	if (!ev_default_loop (0))	450	if (!ev_default_loop (0))
426	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");	451	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
…		…
440		465
441	Similar to C<ev_default_loop>, but always creates a new event loop that is	466	Similar to C<ev_default_loop>, but always creates a new event loop that is
442	always distinct from the default loop. Unlike the default loop, it cannot	467	always distinct from the default loop. Unlike the default loop, it cannot
443	handle signal and child watchers, and attempts to do so will be greeted by	468	handle signal and child watchers, and attempts to do so will be greeted by
444	undefined behaviour (or a failed assertion if assertions are enabled).	469	undefined behaviour (or a failed assertion if assertions are enabled).
		470
		471	Note that this function I<is> thread-safe, and the recommended way to use
		472	libev with threads is indeed to create one loop per thread, and using the
		473	default loop in the "main" or "initial" thread.
445		474
446	Example: Try to create a event loop that uses epoll and nothing else.	475	Example: Try to create a event loop that uses epoll and nothing else.
447		476
448	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL \| EVFLAG_NOENV);	477	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL \| EVFLAG_NOENV);
449	if (!epoller)	478	if (!epoller)
…		…
473	Like C<ev_default_destroy>, but destroys an event loop created by an	502	Like C<ev_default_destroy>, but destroys an event loop created by an
474	earlier call to C<ev_loop_new>.	503	earlier call to C<ev_loop_new>.
475		504
476	=item ev_default_fork ()	505	=item ev_default_fork ()
477		506
		507	This function sets a flag that causes subsequent C<ev_loop> iterations
478	This function reinitialises the kernel state for backends that have	508	to reinitialise the kernel state for backends that have one. Despite the
479	one. Despite the name, you can call it anytime, but it makes most sense	509	name, you can call it anytime, but it makes most sense after forking, in
480	after forking, in either the parent or child process (or both, but that	510	the child process (or both child and parent, but that again makes little
481	again makes little sense).	511	sense). You I<must> call it in the child before using any of the libev
		512	functions, and it will only take effect at the next C<ev_loop> iteration.
482		513
483	You I<must> call this function in the child process after forking if and	514	On the other hand, you only need to call this function in the child
484	only if you want to use the event library in both processes. If you just	515	process if and only if you want to use the event library in the child. If
485	fork+exec, you don't have to call it.	516	you just fork+exec, you don't have to call it at all.
486		517
487	The function itself is quite fast and it's usually not a problem to call	518	The function itself is quite fast and it's usually not a problem to call
488	it just in case after a fork. To make this easy, the function will fit in	519	it just in case after a fork. To make this easy, the function will fit in
489	quite nicely into a call to C<pthread_atfork>:	520	quite nicely into a call to C<pthread_atfork>:
490		521
491	pthread_atfork (0, 0, ev_default_fork);	522	pthread_atfork (0, 0, ev_default_fork);
492		523
493	At the moment, C<EVBACKEND_SELECT> and C<EVBACKEND_POLL> are safe to use
494	without calling this function, so if you force one of those backends you
495	do not need to care.
496
497	=item ev_loop_fork (loop)	524	=item ev_loop_fork (loop)
498		525
499	Like C<ev_default_fork>, but acts on an event loop created by	526	Like C<ev_default_fork>, but acts on an event loop created by
500	C<ev_loop_new>. Yes, you have to call this on every allocated event loop	527	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
501	after fork, and how you do this is entirely your own problem.	528	after fork, and how you do this is entirely your own problem.
		529
		530	=item int ev_is_default_loop (loop)
		531
		532	Returns true when the given loop actually is the default loop, false otherwise.
502		533
503	=item unsigned int ev_loop_count (loop)	534	=item unsigned int ev_loop_count (loop)
504		535
505	Returns the count of loop iterations for the loop, which is identical to	536	Returns the count of loop iterations for the loop, which is identical to
506	the number of times libev did poll for new events. It starts at C<0> and	537	the number of times libev did poll for new events. It starts at C<0> and
…		…
590	Can be used to make a call to C<ev_loop> return early (but only after it	621	Can be used to make a call to C<ev_loop> return early (but only after it
591	has processed all outstanding events). The C<how> argument must be either	622	has processed all outstanding events). The C<how> argument must be either
592	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	623	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or
593	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	624	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.
594		625
		626	This "unloop state" will be cleared when entering C<ev_loop> again.
		627
595	=item ev_ref (loop)	628	=item ev_ref (loop)
596		629
597	=item ev_unref (loop)	630	=item ev_unref (loop)
598		631
599	Ref/unref can be used to add or remove a reference count on the event	632	Ref/unref can be used to add or remove a reference count on the event
…		…
603	returning, ev_unref() after starting, and ev_ref() before stopping it. For	636	returning, ev_unref() after starting, and ev_ref() before stopping it. For
604	example, libev itself uses this for its internal signal pipe: It is not	637	example, libev itself uses this for its internal signal pipe: It is not
605	visible to the libev user and should not keep C<ev_loop> from exiting if	638	visible to the libev user and should not keep C<ev_loop> from exiting if
606	no event watchers registered by it are active. It is also an excellent	639	no event watchers registered by it are active. It is also an excellent
607	way to do this for generic recurring timers or from within third-party	640	way to do this for generic recurring timers or from within third-party
608	libraries. Just remember to I<unref after start> and I<ref before stop>.	641	libraries. Just remember to I<unref after start> and I<ref before stop>
		642	(but only if the watcher wasn't active before, or was active before,
		643	respectively).
609		644
610	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	645	Example: Create a signal watcher, but keep it from keeping C<ev_loop>
611	running when nothing else is active.	646	running when nothing else is active.
612		647
613	struct ev_signal exitsig;	648	struct ev_signal exitsig;
…		…
761		796
762	=item C<EV_FORK>	797	=item C<EV_FORK>
763		798
764	The event loop has been resumed in the child process after fork (see	799	The event loop has been resumed in the child process after fork (see
765	C<ev_fork>).	800	C<ev_fork>).
		801
		802	=item C<EV_ASYNC>
		803
		804	The given async watcher has been asynchronously notified (see C<ev_async>).
766		805
767	=item C<EV_ERROR>	806	=item C<EV_ERROR>
768		807
769	An unspecified error has occured, the watcher has been stopped. This might	808	An unspecified error has occured, the watcher has been stopped. This might
770	happen because the watcher could not be properly started because libev	809	happen because the watcher could not be properly started because libev
…		…
993	If you must do this, then force the use of a known-to-be-good backend	1032	If you must do this, then force the use of a known-to-be-good backend
994	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and	1033	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and
995	C<EVBACKEND_POLL>).	1034	C<EVBACKEND_POLL>).
996		1035
997	Another thing you have to watch out for is that it is quite easy to	1036	Another thing you have to watch out for is that it is quite easy to
998	receive "spurious" readyness notifications, that is your callback might	1037	receive "spurious" readiness notifications, that is your callback might
999	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1038	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
1000	because there is no data. Not only are some backends known to create a	1039	because there is no data. Not only are some backends known to create a
1001	lot of those (for example solaris ports), it is very easy to get into	1040	lot of those (for example solaris ports), it is very easy to get into
1002	this situation even with a relatively standard program structure. Thus	1041	this situation even with a relatively standard program structure. Thus
1003	it is best to always use non-blocking I/O: An extra C<read>(2) returning	1042	it is best to always use non-blocking I/O: An extra C<read>(2) returning
…		…
1050	To support fork in your programs, you either have to call	1089	To support fork in your programs, you either have to call
1051	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,	1090	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,
1052	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or	1091	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or
1053	C<EVBACKEND_POLL>.	1092	C<EVBACKEND_POLL>.
1054		1093
		1094	=head3 The special problem of SIGPIPE
		1095
		1096	While not really specific to libev, it is easy to forget about SIGPIPE:
		1097	when reading from a pipe whose other end has been closed, your program
		1098	gets send a SIGPIPE, which, by default, aborts your program. For most
		1099	programs this is sensible behaviour, for daemons, this is usually
		1100	undesirable.
		1101
		1102	So when you encounter spurious, unexplained daemon exits, make sure you
		1103	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
		1104	somewhere, as that would have given you a big clue).
		1105
1055		1106
1056	=head3 Watcher-Specific Functions	1107	=head3 Watcher-Specific Functions
1057		1108
1058	=over 4	1109	=over 4
1059		1110
…		…
1136	configure a timer to trigger every 10 seconds, then it will trigger at	1187	configure a timer to trigger every 10 seconds, then it will trigger at
1137	exactly 10 second intervals. If, however, your program cannot keep up with	1188	exactly 10 second intervals. If, however, your program cannot keep up with
1138	the timer (because it takes longer than those 10 seconds to do stuff) the	1189	the timer (because it takes longer than those 10 seconds to do stuff) the
1139	timer will not fire more than once per event loop iteration.	1190	timer will not fire more than once per event loop iteration.
1140		1191
1141	=item ev_timer_again (loop)	1192	=item ev_timer_again (loop, ev_timer *)
1142		1193
1143	This will act as if the timer timed out and restart it again if it is	1194	This will act as if the timer timed out and restart it again if it is
1144	repeating. The exact semantics are:	1195	repeating. The exact semantics are:
1145		1196
1146	If the timer is pending, its pending status is cleared.	1197	If the timer is pending, its pending status is cleared.
…		…
1255	In this configuration the watcher triggers an event at the wallclock time	1306	In this configuration the watcher triggers an event at the wallclock time
1256	C<at> and doesn't repeat. It will not adjust when a time jump occurs,	1307	C<at> and doesn't repeat. It will not adjust when a time jump occurs,
1257	that is, if it is to be run at January 1st 2011 then it will run when the	1308	that is, if it is to be run at January 1st 2011 then it will run when the
1258	system time reaches or surpasses this time.	1309	system time reaches or surpasses this time.
1259		1310
1260	=item * non-repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)	1311	=item * repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)
1261		1312
1262	In this mode the watcher will always be scheduled to time out at the next	1313	In this mode the watcher will always be scheduled to time out at the next
1263	C<at + N * interval> time (for some integer N, which can also be negative)	1314	C<at + N * interval> time (for some integer N, which can also be negative)
1264	and then repeat, regardless of any time jumps.	1315	and then repeat, regardless of any time jumps.
1265		1316
…		…
1322	Simply stops and restarts the periodic watcher again. This is only useful	1373	Simply stops and restarts the periodic watcher again. This is only useful
1323	when you changed some parameters or the reschedule callback would return	1374	when you changed some parameters or the reschedule callback would return
1324	a different time than the last time it was called (e.g. in a crond like	1375	a different time than the last time it was called (e.g. in a crond like
1325	program when the crontabs have changed).	1376	program when the crontabs have changed).
1326		1377
		1378	=item ev_tstamp ev_periodic_at (ev_periodic *)
		1379
		1380	When active, returns the absolute time that the watcher is supposed to
		1381	trigger next.
		1382
1327	=item ev_tstamp offset [read-write]	1383	=item ev_tstamp offset [read-write]
1328		1384
1329	When repeating, this contains the offset value, otherwise this is the	1385	When repeating, this contains the offset value, otherwise this is the
1330	absolute point in time (the C<at> value passed to C<ev_periodic_set>).	1386	absolute point in time (the C<at> value passed to C<ev_periodic_set>).
1331		1387
…		…
1341	=item ev_tstamp (reschedule_cb)(struct ev_periodic w, ev_tstamp now) [read-write]	1397	=item ev_tstamp (reschedule_cb)(struct ev_periodic w, ev_tstamp now) [read-write]
1342		1398
1343	The current reschedule callback, or C<0>, if this functionality is	1399	The current reschedule callback, or C<0>, if this functionality is
1344	switched off. Can be changed any time, but changes only take effect when	1400	switched off. Can be changed any time, but changes only take effect when
1345	the periodic timer fires or C<ev_periodic_again> is being called.	1401	the periodic timer fires or C<ev_periodic_again> is being called.
1346
1347	=item ev_tstamp at [read-only]
1348
1349	When active, contains the absolute time that the watcher is supposed to
1350	trigger next.
1351		1402
1352	=back	1403	=back
1353		1404
1354	=head3 Examples	1405	=head3 Examples
1355		1406
…		…
1399	with the kernel (thus it coexists with your own signal handlers as long	1450	with the kernel (thus it coexists with your own signal handlers as long
1400	as you don't register any with libev). Similarly, when the last signal	1451	as you don't register any with libev). Similarly, when the last signal
1401	watcher for a signal is stopped libev will reset the signal handler to	1452	watcher for a signal is stopped libev will reset the signal handler to
1402	SIG_DFL (regardless of what it was set to before).	1453	SIG_DFL (regardless of what it was set to before).
1403		1454
		1455	If possible and supported, libev will install its handlers with
		1456	C<SA_RESTART> behaviour enabled, so syscalls should not be unduly
		1457	interrupted. If you have a problem with syscalls getting interrupted by
		1458	signals you can block all signals in an C<ev_check> watcher and unblock
		1459	them in an C<ev_prepare> watcher.
		1460
1404	=head3 Watcher-Specific Functions and Data Members	1461	=head3 Watcher-Specific Functions and Data Members
1405		1462
1406	=over 4	1463	=over 4
1407		1464
1408	=item ev_signal_init (ev_signal *, callback, int signum)	1465	=item ev_signal_init (ev_signal *, callback, int signum)
…		…
1416		1473
1417	The signal the watcher watches out for.	1474	The signal the watcher watches out for.
1418		1475
1419	=back	1476	=back
1420		1477
		1478	=head3 Examples
		1479
		1480	Example: Try to exit cleanly on SIGINT and SIGTERM.
		1481
		1482	static void
		1483	sigint_cb (struct ev_loop loop, struct ev_signal w, int revents)
		1484	{
		1485	ev_unloop (loop, EVUNLOOP_ALL);
		1486	}
		1487
		1488	struct ev_signal signal_watcher;
		1489	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
		1490	ev_signal_start (loop, &sigint_cb);
		1491
1421		1492
1422	=head2 C<ev_child> - watch out for process status changes	1493	=head2 C<ev_child> - watch out for process status changes
1423		1494
1424	Child watchers trigger when your process receives a SIGCHLD in response to	1495	Child watchers trigger when your process receives a SIGCHLD in response to
1425	some child status changes (most typically when a child of yours dies).	1496	some child status changes (most typically when a child of yours dies). It
		1497	is permissible to install a child watcher I<after> the child has been
		1498	forked (which implies it might have already exited), as long as the event
		1499	loop isn't entered (or is continued from a watcher).
		1500
		1501	Only the default event loop is capable of handling signals, and therefore
		1502	you can only rgeister child watchers in the default event loop.
		1503
		1504	=head3 Process Interaction
		1505
		1506	Libev grabs C<SIGCHLD> as soon as the default event loop is
		1507	initialised. This is necessary to guarantee proper behaviour even if
		1508	the first child watcher is started after the child exits. The occurance
		1509	of C<SIGCHLD> is recorded asynchronously, but child reaping is done
		1510	synchronously as part of the event loop processing. Libev always reaps all
		1511	children, even ones not watched.
		1512
		1513	=head3 Overriding the Built-In Processing
		1514
		1515	Libev offers no special support for overriding the built-in child
		1516	processing, but if your application collides with libev's default child
		1517	handler, you can override it easily by installing your own handler for
		1518	C<SIGCHLD> after initialising the default loop, and making sure the
		1519	default loop never gets destroyed. You are encouraged, however, to use an
		1520	event-based approach to child reaping and thus use libev's support for
		1521	that, so other libev users can use C<ev_child> watchers freely.
1426		1522
1427	=head3 Watcher-Specific Functions and Data Members	1523	=head3 Watcher-Specific Functions and Data Members
1428		1524
1429	=over 4	1525	=over 4
1430		1526
1431	=item ev_child_init (ev_child *, callback, int pid)	1527	=item ev_child_init (ev_child *, callback, int pid, int trace)
1432		1528
1433	=item ev_child_set (ev_child *, int pid)	1529	=item ev_child_set (ev_child *, int pid, int trace)
1434		1530
1435	Configures the watcher to wait for status changes of process C<pid> (or	1531	Configures the watcher to wait for status changes of process C<pid> (or
1436	I<any> process if C<pid> is specified as C<0>). The callback can look	1532	I<any> process if C<pid> is specified as C<0>). The callback can look
1437	at the C<rstatus> member of the C<ev_child> watcher structure to see	1533	at the C<rstatus> member of the C<ev_child> watcher structure to see
1438	the status word (use the macros from C<sys/wait.h> and see your systems	1534	the status word (use the macros from C<sys/wait.h> and see your systems
1439	C<waitpid> documentation). The C<rpid> member contains the pid of the	1535	C<waitpid> documentation). The C<rpid> member contains the pid of the
1440	process causing the status change.	1536	process causing the status change. C<trace> must be either C<0> (only
		1537	activate the watcher when the process terminates) or C<1> (additionally
		1538	activate the watcher when the process is stopped or continued).
1441		1539
1442	=item int pid [read-only]	1540	=item int pid [read-only]
1443		1541
1444	The process id this watcher watches out for, or C<0>, meaning any process id.	1542	The process id this watcher watches out for, or C<0>, meaning any process id.
1445		1543
…		…
1454		1552
1455	=back	1553	=back
1456		1554
1457	=head3 Examples	1555	=head3 Examples
1458		1556
1459	Example: Try to exit cleanly on SIGINT and SIGTERM.	1557	Example: C<fork()> a new process and install a child handler to wait for
		1558	its completion.
		1559
		1560	ev_child cw;
1460		1561
1461	static void	1562	static void
1462	sigint_cb (struct ev_loop loop, struct ev_signal w, int revents)	1563	child_cb (EV_P_ struct ev_child *w, int revents)
1463	{	1564	{
1464	ev_unloop (loop, EVUNLOOP_ALL);	1565	ev_child_stop (EV_A_ w);
		1566	printf ("process %d exited with status %x\n", w->rpid, w->rstatus);
1465	}	1567	}
1466		1568
1467	struct ev_signal signal_watcher;	1569	pid_t pid = fork ();
1468	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	1570
1469	ev_signal_start (loop, &sigint_cb);	1571	if (pid < 0)
		1572	// error
		1573	else if (pid == 0)
		1574	{
		1575	// the forked child executes here
		1576	exit (1);
		1577	}
		1578	else
		1579	{
		1580	ev_child_init (&cw, child_cb, pid, 0);
		1581	ev_child_start (EV_DEFAULT_ &cw);
		1582	}
1470		1583
1471		1584
1472	=head2 C<ev_stat> - did the file attributes just change?	1585	=head2 C<ev_stat> - did the file attributes just change?
1473		1586
1474	This watches a filesystem path for attribute changes. That is, it calls	1587	This watches a filesystem path for attribute changes. That is, it calls
…		…
1497	as even with OS-supported change notifications, this can be	1610	as even with OS-supported change notifications, this can be
1498	resource-intensive.	1611	resource-intensive.
1499		1612
1500	At the time of this writing, only the Linux inotify interface is	1613	At the time of this writing, only the Linux inotify interface is
1501	implemented (implementing kqueue support is left as an exercise for the	1614	implemented (implementing kqueue support is left as an exercise for the
		1615	reader, note, however, that the author sees no way of implementing ev_stat
1502	reader). Inotify will be used to give hints only and should not change the	1616	semantics with kqueue). Inotify will be used to give hints only and should
1503	semantics of C<ev_stat> watchers, which means that libev sometimes needs	1617	not change the semantics of C<ev_stat> watchers, which means that libev
1504	to fall back to regular polling again even with inotify, but changes are	1618	sometimes needs to fall back to regular polling again even with inotify,
1505	usually detected immediately, and if the file exists there will be no	1619	but changes are usually detected immediately, and if the file exists there
1506	polling.	1620	will be no polling.
		1621
		1622	=head3 ABI Issues (Largefile Support)
		1623
		1624	Libev by default (unless the user overrides this) uses the default
		1625	compilation environment, which means that on systems with optionally
		1626	disabled large file support, you get the 32 bit version of the stat
		1627	structure. When using the library from programs that change the ABI to
		1628	use 64 bit file offsets the programs will fail. In that case you have to
		1629	compile libev with the same flags to get binary compatibility. This is
		1630	obviously the case with any flags that change the ABI, but the problem is
		1631	most noticably with ev_stat and largefile support.
1507		1632
1508	=head3 Inotify	1633	=head3 Inotify
1509		1634
1510	When C<inotify (7)> support has been compiled into libev (generally only	1635	When C<inotify (7)> support has been compiled into libev (generally only
1511	available on Linux) and present at runtime, it will be used to speed up	1636	available on Linux) and present at runtime, it will be used to speed up
1512	change detection where possible. The inotify descriptor will be created lazily	1637	change detection where possible. The inotify descriptor will be created lazily
1513	when the first C<ev_stat> watcher is being started.	1638	when the first C<ev_stat> watcher is being started.
1514		1639
1515	Inotify presense does not change the semantics of C<ev_stat> watchers	1640	Inotify presence does not change the semantics of C<ev_stat> watchers
1516	except that changes might be detected earlier, and in some cases, to avoid	1641	except that changes might be detected earlier, and in some cases, to avoid
1517	making regular C<stat> calls. Even in the presense of inotify support	1642	making regular C<stat> calls. Even in the presence of inotify support
1518	there are many cases where libev has to resort to regular C<stat> polling.	1643	there are many cases where libev has to resort to regular C<stat> polling.
1519		1644
1520	(There is no support for kqueue, as apparently it cannot be used to	1645	(There is no support for kqueue, as apparently it cannot be used to
1521	implement this functionality, due to the requirement of having a file	1646	implement this functionality, due to the requirement of having a file
1522	descriptor open on the object at all times).	1647	descriptor open on the object at all times).
…		…
1525		1650
1526	The C<stat ()> syscall only supports full-second resolution portably, and	1651	The C<stat ()> syscall only supports full-second resolution portably, and
1527	even on systems where the resolution is higher, many filesystems still	1652	even on systems where the resolution is higher, many filesystems still
1528	only support whole seconds.	1653	only support whole seconds.
1529		1654
1530	That means that, if the time is the only thing that changes, you might	1655	That means that, if the time is the only thing that changes, you can
1531	miss updates: on the first update, C<ev_stat> detects a change and calls	1656	easily miss updates: on the first update, C<ev_stat> detects a change and
1532	your callback, which does something. When there is another update within	1657	calls your callback, which does something. When there is another update
1533	the same second, C<ev_stat> will be unable to detect it.	1658	within the same second, C<ev_stat> will be unable to detect it as the stat
		1659	data does not change.
1534		1660
1535	The solution to this is to delay acting on a change for a second (or till	1661	The solution to this is to delay acting on a change for slightly more
1536	the next second boundary), using a roughly one-second delay C<ev_timer>	1662	than a second (or till slightly after the next full second boundary), using
1537	(C<ev_timer_set (w, 0., 1.01); ev_timer_again (loop, w)>). The C<.01>	1663	a roughly one-second-delay C<ev_timer> (e.g. C<ev_timer_set (w, 0., 1.02);
1538	is added to work around small timing inconsistencies of some operating	1664	ev_timer_again (loop, w)>).
1539	systems.	1665
		1666	The C<.02> offset is added to work around small timing inconsistencies
		1667	of some operating systems (where the second counter of the current time
		1668	might be be delayed. One such system is the Linux kernel, where a call to
		1669	C<gettimeofday> might return a timestamp with a full second later than
		1670	a subsequent C<time> call - if the equivalent of C<time ()> is used to
		1671	update file times then there will be a small window where the kernel uses
		1672	the previous second to update file times but libev might already execute
		1673	the timer callback).
1540		1674
1541	=head3 Watcher-Specific Functions and Data Members	1675	=head3 Watcher-Specific Functions and Data Members
1542		1676
1543	=over 4	1677	=over 4
1544		1678
…		…
1550	C<path>. The C<interval> is a hint on how quickly a change is expected to	1684	C<path>. The C<interval> is a hint on how quickly a change is expected to
1551	be detected and should normally be specified as C<0> to let libev choose	1685	be detected and should normally be specified as C<0> to let libev choose
1552	a suitable value. The memory pointed to by C<path> must point to the same	1686	a suitable value. The memory pointed to by C<path> must point to the same
1553	path for as long as the watcher is active.	1687	path for as long as the watcher is active.
1554		1688
1555	The callback will be receive C<EV_STAT> when a change was detected,	1689	The callback will receive C<EV_STAT> when a change was detected, relative
1556	relative to the attributes at the time the watcher was started (or the	1690	to the attributes at the time the watcher was started (or the last change
1557	last change was detected).	1691	was detected).
1558		1692
1559	=item ev_stat_stat (ev_stat *)	1693	=item ev_stat_stat (loop, ev_stat *)
1560		1694
1561	Updates the stat buffer immediately with new values. If you change the	1695	Updates the stat buffer immediately with new values. If you change the
1562	watched path in your callback, you could call this fucntion to avoid	1696	watched path in your callback, you could call this function to avoid
1563	detecting this change (while introducing a race condition). Can also be	1697	detecting this change (while introducing a race condition if you are not
1564	useful simply to find out the new values.	1698	the only one changing the path). Can also be useful simply to find out the
		1699	new values.
1565		1700
1566	=item ev_statdata attr [read-only]	1701	=item ev_statdata attr [read-only]
1567		1702
1568	The most-recently detected attributes of the file. Although the type is of	1703	The most-recently detected attributes of the file. Although the type is
1569	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types	1704	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types
1570	suitable for your system. If the C<st_nlink> member is C<0>, then there	1705	suitable for your system, but you can only rely on the POSIX-standardised
		1706	members to be present. If the C<st_nlink> member is C<0>, then there was
1571	was some error while C<stat>ing the file.	1707	some error while C<stat>ing the file.
1572		1708
1573	=item ev_statdata prev [read-only]	1709	=item ev_statdata prev [read-only]
1574		1710
1575	The previous attributes of the file. The callback gets invoked whenever	1711	The previous attributes of the file. The callback gets invoked whenever
1576	C<prev> != C<attr>.	1712	C<prev> != C<attr>, or, more precisely, one or more of these members
		1713	differ: C<st_dev>, C<st_ino>, C<st_mode>, C<st_nlink>, C<st_uid>,
		1714	C<st_gid>, C<st_rdev>, C<st_size>, C<st_atime>, C<st_mtime>, C<st_ctime>.
1577		1715
1578	=item ev_tstamp interval [read-only]	1716	=item ev_tstamp interval [read-only]
1579		1717
1580	The specified interval.	1718	The specified interval.
1581		1719
…		…
1635	}	1773	}
1636		1774
1637	...	1775	...
1638	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);	1776	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);
1639	ev_stat_start (loop, &passwd);	1777	ev_stat_start (loop, &passwd);
1640	ev_timer_init (&timer, timer_cb, 0., 1.01);	1778	ev_timer_init (&timer, timer_cb, 0., 1.02);
1641		1779
1642		1780
1643	=head2 C<ev_idle> - when you've got nothing better to do...	1781	=head2 C<ev_idle> - when you've got nothing better to do...
1644		1782
1645	Idle watchers trigger events when no other events of the same or higher	1783	Idle watchers trigger events when no other events of the same or higher
…		…
1681	static void	1819	static void
1682	idle_cb (struct ev_loop loop, struct ev_idle w, int revents)	1820	idle_cb (struct ev_loop loop, struct ev_idle w, int revents)
1683	{	1821	{
1684	free (w);	1822	free (w);
1685	// now do something you wanted to do when the program has	1823	// now do something you wanted to do when the program has
1686	// no longer asnything immediate to do.	1824	// no longer anything immediate to do.
1687	}	1825	}
1688		1826
1689	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));	1827	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));
1690	ev_idle_init (idle_watcher, idle_cb);	1828	ev_idle_init (idle_watcher, idle_cb);
1691	ev_idle_start (loop, idle_cb);	1829	ev_idle_start (loop, idle_cb);
…		…
1733		1871
1734	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)	1872	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)
1735	priority, to ensure that they are being run before any other watchers	1873	priority, to ensure that they are being run before any other watchers
1736	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,	1874	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,
1737	too) should not activate ("feed") events into libev. While libev fully	1875	too) should not activate ("feed") events into libev. While libev fully
1738	supports this, they will be called before other C<ev_check> watchers	1876	supports this, they might get executed before other C<ev_check> watchers
1739	did their job. As C<ev_check> watchers are often used to embed other	1877	did their job. As C<ev_check> watchers are often used to embed other
1740	(non-libev) event loops those other event loops might be in an unusable	1878	(non-libev) event loops those other event loops might be in an unusable
1741	state until their C<ev_check> watcher ran (always remind yourself to	1879	state until their C<ev_check> watcher ran (always remind yourself to
1742	coexist peacefully with others).	1880	coexist peacefully with others).
1743		1881
…		…
1758	=head3 Examples	1896	=head3 Examples
1759		1897
1760	There are a number of principal ways to embed other event loops or modules	1898	There are a number of principal ways to embed other event loops or modules
1761	into libev. Here are some ideas on how to include libadns into libev	1899	into libev. Here are some ideas on how to include libadns into libev
1762	(there is a Perl module named C<EV::ADNS> that does this, which you could	1900	(there is a Perl module named C<EV::ADNS> that does this, which you could
1763	use for an actually working example. Another Perl module named C<EV::Glib>	1901	use as a working example. Another Perl module named C<EV::Glib> embeds a
1764	embeds a Glib main context into libev, and finally, C<Glib::EV> embeds EV	1902	Glib main context into libev, and finally, C<Glib::EV> embeds EV into the
1765	into the Glib event loop).	1903	Glib event loop).
1766		1904
1767	Method 1: Add IO watchers and a timeout watcher in a prepare handler,	1905	Method 1: Add IO watchers and a timeout watcher in a prepare handler,
1768	and in a check watcher, destroy them and call into libadns. What follows	1906	and in a check watcher, destroy them and call into libadns. What follows
1769	is pseudo-code only of course. This requires you to either use a low	1907	is pseudo-code only of course. This requires you to either use a low
1770	priority for the check watcher or use C<ev_clear_pending> explicitly, as	1908	priority for the check watcher or use C<ev_clear_pending> explicitly, as
…		…
2032	believe me.	2170	believe me.
2033		2171
2034	=back	2172	=back
2035		2173
2036		2174
		2175	=head2 C<ev_async> - how to wake up another event loop
		2176
		2177	In general, you cannot use an C<ev_loop> from multiple threads or other
		2178	asynchronous sources such as signal handlers (as opposed to multiple event
		2179	loops - those are of course safe to use in different threads).
		2180
		2181	Sometimes, however, you need to wake up another event loop you do not
		2182	control, for example because it belongs to another thread. This is what
		2183	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you
		2184	can signal it by calling C<ev_async_send>, which is thread- and signal
		2185	safe.
		2186
		2187	This functionality is very similar to C<ev_signal> watchers, as signals,
		2188	too, are asynchronous in nature, and signals, too, will be compressed
		2189	(i.e. the number of callback invocations may be less than the number of
		2190	C<ev_async_sent> calls).
		2191
		2192	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not
		2193	just the default loop.
		2194
		2195	=head3 Queueing
		2196
		2197	C<ev_async> does not support queueing of data in any way. The reason
		2198	is that the author does not know of a simple (or any) algorithm for a
		2199	multiple-writer-single-reader queue that works in all cases and doesn't
		2200	need elaborate support such as pthreads.
		2201
		2202	That means that if you want to queue data, you have to provide your own
		2203	queue. But at least I can tell you would implement locking around your
		2204	queue:
		2205
		2206	=over 4
		2207
		2208	=item queueing from a signal handler context
		2209
		2210	To implement race-free queueing, you simply add to the queue in the signal
		2211	handler but you block the signal handler in the watcher callback. Here is an example that does that for
		2212	some fictitiuous SIGUSR1 handler:
		2213
		2214	static ev_async mysig;
		2215
		2216	static void
		2217	sigusr1_handler (void)
		2218	{
		2219	sometype data;
		2220
		2221	// no locking etc.
		2222	queue_put (data);
		2223	ev_async_send (EV_DEFAULT_ &mysig);
		2224	}
		2225
		2226	static void
		2227	mysig_cb (EV_P_ ev_async *w, int revents)
		2228	{
		2229	sometype data;
		2230	sigset_t block, prev;
		2231
		2232	sigemptyset (&block);
		2233	sigaddset (&block, SIGUSR1);
		2234	sigprocmask (SIG_BLOCK, &block, &prev);
		2235
		2236	while (queue_get (&data))
		2237	process (data);
		2238
		2239	if (sigismember (&prev, SIGUSR1)
		2240	sigprocmask (SIG_UNBLOCK, &block, 0);
		2241	}
		2242
		2243	(Note: pthreads in theory requires you to use C<pthread_setmask>
		2244	instead of C<sigprocmask> when you use threads, but libev doesn't do it
		2245	either...).
		2246
		2247	=item queueing from a thread context
		2248
		2249	The strategy for threads is different, as you cannot (easily) block
		2250	threads but you can easily preempt them, so to queue safely you need to
		2251	employ a traditional mutex lock, such as in this pthread example:
		2252
		2253	static ev_async mysig;
		2254	static pthread_mutex_t mymutex = PTHREAD_MUTEX_INITIALIZER;
		2255
		2256	static void
		2257	otherthread (void)
		2258	{
		2259	// only need to lock the actual queueing operation
		2260	pthread_mutex_lock (&mymutex);
		2261	queue_put (data);
		2262	pthread_mutex_unlock (&mymutex);
		2263
		2264	ev_async_send (EV_DEFAULT_ &mysig);
		2265	}
		2266
		2267	static void
		2268	mysig_cb (EV_P_ ev_async *w, int revents)
		2269	{
		2270	pthread_mutex_lock (&mymutex);
		2271
		2272	while (queue_get (&data))
		2273	process (data);
		2274
		2275	pthread_mutex_unlock (&mymutex);
		2276	}
		2277
		2278	=back
		2279
		2280
		2281	=head3 Watcher-Specific Functions and Data Members
		2282
		2283	=over 4
		2284
		2285	=item ev_async_init (ev_async *, callback)
		2286
		2287	Initialises and configures the async watcher - it has no parameters of any
		2288	kind. There is a C<ev_asynd_set> macro, but using it is utterly pointless,
		2289	believe me.
		2290
		2291	=item ev_async_send (loop, ev_async *)
		2292
		2293	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
		2294	an C<EV_ASYNC> event on the watcher into the event loop. Unlike
		2295	C<ev_feed_event>, this call is safe to do in other threads, signal or
		2296	similar contexts (see the dicusssion of C<EV_ATOMIC_T> in the embedding
		2297	section below on what exactly this means).
		2298
		2299	This call incurs the overhead of a syscall only once per loop iteration,
		2300	so while the overhead might be noticable, it doesn't apply to repeated
		2301	calls to C<ev_async_send>.
		2302
		2303	=item bool = ev_async_pending (ev_async *)
		2304
		2305	Returns a non-zero value when C<ev_async_send> has been called on the
		2306	watcher but the event has not yet been processed (or even noted) by the
		2307	event loop.
		2308
		2309	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When
		2310	the loop iterates next and checks for the watcher to have become active,
		2311	it will reset the flag again. C<ev_async_pending> can be used to very
		2312	quickly check wether invoking the loop might be a good idea.
		2313
		2314	Not that this does I<not> check wether the watcher itself is pending, only
		2315	wether it has been requested to make this watcher pending.
		2316
		2317	=back
		2318
		2319
2037	=head1 OTHER FUNCTIONS	2320	=head1 OTHER FUNCTIONS
2038		2321
2039	There are some other functions of possible interest. Described. Here. Now.	2322	There are some other functions of possible interest. Described. Here. Now.
2040		2323
2041	=over 4	2324	=over 4
…		…
2109		2392
2110	=item * Priorities are not currently supported. Initialising priorities	2393	=item * Priorities are not currently supported. Initialising priorities
2111	will fail and all watchers will have the same priority, even though there	2394	will fail and all watchers will have the same priority, even though there
2112	is an ev_pri field.	2395	is an ev_pri field.
2113		2396
		2397	=item * In libevent, the last base created gets the signals, in libev, the
		2398	first base created (== the default loop) gets the signals.
		2399
2114	=item * Other members are not supported.	2400	=item * Other members are not supported.
2115		2401
2116	=item * The libev emulation is I<not> ABI compatible to libevent, you need	2402	=item * The libev emulation is I<not> ABI compatible to libevent, you need
2117	to use the libev header file and library.	2403	to use the libev header file and library.
2118		2404
…		…
2268	Example: Define a class with an IO and idle watcher, start one of them in	2554	Example: Define a class with an IO and idle watcher, start one of them in
2269	the constructor.	2555	the constructor.
2270		2556
2271	class myclass	2557	class myclass
2272	{	2558	{
2273	ev_io io; void io_cb (ev::io &w, int revents);	2559	ev::io io; void io_cb (ev::io &w, int revents);
2274	ev_idle idle void idle_cb (ev::idle &w, int revents);	2560	ev:idle idle void idle_cb (ev::idle &w, int revents);
2275		2561
2276	myclass ();	2562	myclass (int fd)
2277	}
2278
2279	myclass::myclass (int fd)
2280	{	2563	{
2281	io .set <myclass, &myclass::io_cb > (this);	2564	io .set <myclass, &myclass::io_cb > (this);
2282	idle.set <myclass, &myclass::idle_cb> (this);	2565	idle.set <myclass, &myclass::idle_cb> (this);
2283		2566
2284	io.start (fd, ev::READ);	2567	io.start (fd, ev::READ);
		2568	}
2285	}	2569	};
		2570
		2571
		2572	=head1 OTHER LANGUAGE BINDINGS
		2573
		2574	Libev does not offer other language bindings itself, but bindings for a
		2575	numbe rof languages exist in the form of third-party packages. If you know
		2576	any interesting language binding in addition to the ones listed here, drop
		2577	me a note.
		2578
		2579	=over 4
		2580
		2581	=item Perl
		2582
		2583	The EV module implements the full libev API and is actually used to test
		2584	libev. EV is developed together with libev. Apart from the EV core module,
		2585	there are additional modules that implement libev-compatible interfaces
		2586	to C<libadns> (C<EV::ADNS>), C<Net::SNMP> (C<Net::SNMP::EV>) and the
		2587	C<libglib> event core (C<Glib::EV> and C<EV::Glib>).
		2588
		2589	It can be found and installed via CPAN, its homepage is found at
		2590	L<http://software.schmorp.de/pkg/EV>.
		2591
		2592	=item Ruby
		2593
		2594	Tony Arcieri has written a ruby extension that offers access to a subset
		2595	of the libev API and adds filehandle abstractions, asynchronous DNS and
		2596	more on top of it. It can be found via gem servers. Its homepage is at
		2597	L<http://rev.rubyforge.org/>.
		2598
		2599	=item D
		2600
		2601	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
		2602	be found at L<http://git.llucax.com.ar/?p=software/ev.d.git;a=summary>.
		2603
		2604	=back
2286		2605
2287		2606
2288	=head1 MACRO MAGIC	2607	=head1 MACRO MAGIC
2289		2608
2290	Libev can be compiled with a variety of options, the most fundamantal	2609	Libev can be compiled with a variety of options, the most fundamantal
…		…
2326		2645
2327	=item C<EV_DEFAULT>, C<EV_DEFAULT_>	2646	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
2328		2647
2329	Similar to the other two macros, this gives you the value of the default	2648	Similar to the other two macros, this gives you the value of the default
2330	loop, if multiple loops are supported ("ev loop default").	2649	loop, if multiple loops are supported ("ev loop default").
		2650
		2651	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
		2652
		2653	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
		2654	default loop has been initialised (C<UC> == unchecked). Their behaviour
		2655	is undefined when the default loop has not been initialised by a previous
		2656	execution of C<EV_DEFAULT>, C<EV_DEFAULT_> or C<ev_default_init (...)>.
		2657
		2658	It is often prudent to use C<EV_DEFAULT> when initialising the first
		2659	watcher in a function but use C<EV_DEFAULT_UC> afterwards.
2331		2660
2332	=back	2661	=back
2333		2662
2334	Example: Declare and initialise a check watcher, utilising the above	2663	Example: Declare and initialise a check watcher, utilising the above
2335	macros so it will work regardless of whether multiple loops are supported	2664	macros so it will work regardless of whether multiple loops are supported
…		…
2431		2760
2432	libev.m4	2761	libev.m4
2433		2762
2434	=head2 PREPROCESSOR SYMBOLS/MACROS	2763	=head2 PREPROCESSOR SYMBOLS/MACROS
2435		2764
2436	Libev can be configured via a variety of preprocessor symbols you have to define	2765	Libev can be configured via a variety of preprocessor symbols you have to
2437	before including any of its files. The default is not to build for multiplicity	2766	define before including any of its files. The default in the absense of
2438	and only include the select backend.	2767	autoconf is noted for every option.
2439		2768
2440	=over 4	2769	=over 4
2441		2770
2442	=item EV_STANDALONE	2771	=item EV_STANDALONE
2443		2772
…		…
2469	=item EV_USE_NANOSLEEP	2798	=item EV_USE_NANOSLEEP
2470		2799
2471	If defined to be C<1>, libev will assume that C<nanosleep ()> is available	2800	If defined to be C<1>, libev will assume that C<nanosleep ()> is available
2472	and will use it for delays. Otherwise it will use C<select ()>.	2801	and will use it for delays. Otherwise it will use C<select ()>.
2473		2802
		2803	=item EV_USE_EVENTFD
		2804
		2805	If defined to be C<1>, then libev will assume that C<eventfd ()> is
		2806	available and will probe for kernel support at runtime. This will improve
		2807	C<ev_signal> and C<ev_async> performance and reduce resource consumption.
		2808	If undefined, it will be enabled if the headers indicate GNU/Linux + Glibc
		2809	2.7 or newer, otherwise disabled.
		2810
2474	=item EV_USE_SELECT	2811	=item EV_USE_SELECT
2475		2812
2476	If undefined or defined to be C<1>, libev will compile in support for the	2813	If undefined or defined to be C<1>, libev will compile in support for the
2477	C<select>(2) backend. No attempt at autodetection will be done: if no	2814	C<select>(2) backend. No attempt at autodetection will be done: if no
2478	other method takes over, select will be it. Otherwise the select backend	2815	other method takes over, select will be it. Otherwise the select backend
…		…
2514		2851
2515	=item EV_USE_EPOLL	2852	=item EV_USE_EPOLL
2516		2853
2517	If defined to be C<1>, libev will compile in support for the Linux	2854	If defined to be C<1>, libev will compile in support for the Linux
2518	C<epoll>(7) backend. Its availability will be detected at runtime,	2855	C<epoll>(7) backend. Its availability will be detected at runtime,
2519	otherwise another method will be used as fallback. This is the	2856	otherwise another method will be used as fallback. This is the preferred
2520	preferred backend for GNU/Linux systems.	2857	backend for GNU/Linux systems. If undefined, it will be enabled if the
		2858	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
2521		2859
2522	=item EV_USE_KQUEUE	2860	=item EV_USE_KQUEUE
2523		2861
2524	If defined to be C<1>, libev will compile in support for the BSD style	2862	If defined to be C<1>, libev will compile in support for the BSD style
2525	C<kqueue>(2) backend. Its actual availability will be detected at runtime,	2863	C<kqueue>(2) backend. Its actual availability will be detected at runtime,
…		…
2544		2882
2545	=item EV_USE_INOTIFY	2883	=item EV_USE_INOTIFY
2546		2884
2547	If defined to be C<1>, libev will compile in support for the Linux inotify	2885	If defined to be C<1>, libev will compile in support for the Linux inotify
2548	interface to speed up C<ev_stat> watchers. Its actual availability will	2886	interface to speed up C<ev_stat> watchers. Its actual availability will
2549	be detected at runtime.	2887	be detected at runtime. If undefined, it will be enabled if the headers
		2888	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
		2889
		2890	=item EV_ATOMIC_T
		2891
		2892	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
		2893	access is atomic with respect to other threads or signal contexts. No such
		2894	type is easily found in the C language, so you can provide your own type
		2895	that you know is safe for your purposes. It is used both for signal handler "locking"
		2896	as well as for signal and thread safety in C<ev_async> watchers.
		2897
		2898	In the absense of this define, libev will use C<sig_atomic_t volatile>
		2899	(from F<signal.h>), which is usually good enough on most platforms.
2550		2900
2551	=item EV_H	2901	=item EV_H
2552		2902
2553	The name of the F<ev.h> header file used to include it. The default if	2903	The name of the F<ev.h> header file used to include it. The default if
2554	undefined is C<"ev.h"> in F<event.h> and F<ev.c>. This can be used to	2904	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
2555	virtually rename the F<ev.h> header file in case of conflicts.	2905	used to virtually rename the F<ev.h> header file in case of conflicts.
2556		2906
2557	=item EV_CONFIG_H	2907	=item EV_CONFIG_H
2558		2908
2559	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	2909	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
2560	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	2910	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
2561	C<EV_H>, above.	2911	C<EV_H>, above.
2562		2912
2563	=item EV_EVENT_H	2913	=item EV_EVENT_H
2564		2914
2565	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	2915	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
2566	of how the F<event.h> header can be found, the dfeault is C<"event.h">.	2916	of how the F<event.h> header can be found, the default is C<"event.h">.
2567		2917
2568	=item EV_PROTOTYPES	2918	=item EV_PROTOTYPES
2569		2919
2570	If defined to be C<0>, then F<ev.h> will not define any function	2920	If defined to be C<0>, then F<ev.h> will not define any function
2571	prototypes, but still define all the structs and other symbols. This is	2921	prototypes, but still define all the structs and other symbols. This is
…		…
2622	=item EV_FORK_ENABLE	2972	=item EV_FORK_ENABLE
2623		2973
2624	If undefined or defined to be C<1>, then fork watchers are supported. If	2974	If undefined or defined to be C<1>, then fork watchers are supported. If
2625	defined to be C<0>, then they are not.	2975	defined to be C<0>, then they are not.
2626		2976
		2977	=item EV_ASYNC_ENABLE
		2978
		2979	If undefined or defined to be C<1>, then async watchers are supported. If
		2980	defined to be C<0>, then they are not.
		2981
2627	=item EV_MINIMAL	2982	=item EV_MINIMAL
2628		2983
2629	If you need to shave off some kilobytes of code at the expense of some	2984	If you need to shave off some kilobytes of code at the expense of some
2630	speed, define this symbol to C<1>. Currently only used for gcc to override	2985	speed, define this symbol to C<1>. Currently this is used to override some
2631	some inlining decisions, saves roughly 30% codesize of amd64.	2986	inlining decisions, saves roughly 30% codesize of amd64. It also selects a
		2987	much smaller 2-heap for timer management over the default 4-heap.
2632		2988
2633	=item EV_PID_HASHSIZE	2989	=item EV_PID_HASHSIZE
2634		2990
2635	C<ev_child> watchers use a small hash table to distribute workload by	2991	C<ev_child> watchers use a small hash table to distribute workload by
2636	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	2992	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more
…		…
2642	C<ev_stat> watchers use a small hash table to distribute workload by	2998	C<ev_stat> watchers use a small hash table to distribute workload by
2643	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	2999	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),
2644	usually more than enough. If you need to manage thousands of C<ev_stat>	3000	usually more than enough. If you need to manage thousands of C<ev_stat>
2645	watchers you might want to increase this value (I<must> be a power of	3001	watchers you might want to increase this value (I<must> be a power of
2646	two).	3002	two).
		3003
		3004	=item EV_USE_4HEAP
		3005
		3006	Heaps are not very cache-efficient. To improve the cache-efficiency of the
		3007	timer and periodics heap, libev uses a 4-heap when this symbol is defined
		3008	to C<1>. The 4-heap uses more complicated (longer) code but has
		3009	noticably faster performance with many (thousands) of watchers.
		3010
		3011	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>
		3012	(disabled).
		3013
		3014	=item EV_HEAP_CACHE_AT
		3015
		3016	Heaps are not very cache-efficient. To improve the cache-efficiency of the
		3017	timer and periodics heap, libev can cache the timestamp (I<at>) within
		3018	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
		3019	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
		3020	but avoids random read accesses on heap changes. This improves performance
		3021	noticably with with many (hundreds) of watchers.
		3022
		3023	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>
		3024	(disabled).
2647		3025
2648	=item EV_COMMON	3026	=item EV_COMMON
2649		3027
2650	By default, all watchers have a C<void *data> member. By redefining	3028	By default, all watchers have a C<void *data> member. By redefining
2651	this macro to a something else you can include more and other types of	3029	this macro to a something else you can include more and other types of
…		…
2725		3103
2726	#include "ev_cpp.h"	3104	#include "ev_cpp.h"
2727	#include "ev.c"	3105	#include "ev.c"
2728		3106
2729		3107
		3108	=head1 THREADS AND COROUTINES
		3109
		3110	=head2 THREADS
		3111
		3112	Libev itself is completely threadsafe, but it uses no locking. This
		3113	means that you can use as many loops as you want in parallel, as long as
		3114	only one thread ever calls into one libev function with the same loop
		3115	parameter.
		3116
		3117	Or put differently: calls with different loop parameters can be done in
		3118	parallel from multiple threads, calls with the same loop parameter must be
		3119	done serially (but can be done from different threads, as long as only one
		3120	thread ever is inside a call at any point in time, e.g. by using a mutex
		3121	per loop).
		3122
		3123	If you want to know which design is best for your problem, then I cannot
		3124	help you but by giving some generic advice:
		3125
		3126	=over 4
		3127
		3128	=item * most applications have a main thread: use the default libev loop
		3129	in that thread, or create a seperate thread running only the default loop.
		3130
		3131	This helps integrating other libraries or software modules that use libev
		3132	themselves and don't care/know about threading.
		3133
		3134	=item * one loop per thread is usually a good model.
		3135
		3136	Doing this is almost never wrong, sometimes a better-performance model
		3137	exists, but it is always a good start.
		3138
		3139	=item * other models exist, such as the leader/follower pattern, where one
		3140	loop is handed through multiple threads in a kind of round-robbin fashion.
		3141
		3142	Chosing a model is hard - look around, learn, know that usually you cna do
		3143	better than you currently do :-)
		3144
		3145	=item * often you need to talk to some other thread which blocks in the
		3146	event loop - C<ev_async> watchers can be used to wake them up from other
		3147	threads safely (or from signal contexts...).
		3148
		3149	=back
		3150
		3151	=head2 COROUTINES
		3152
		3153	Libev is much more accomodating to coroutines ("cooperative threads"):
		3154	libev fully supports nesting calls to it's functions from different
		3155	coroutines (e.g. you can call C<ev_loop> on the same loop from two
		3156	different coroutines and switch freely between both coroutines running the
		3157	loop, as long as you don't confuse yourself). The only exception is that
		3158	you must not do this from C<ev_periodic> reschedule callbacks.
		3159
		3160	Care has been invested into making sure that libev does not keep local
		3161	state inside C<ev_loop>, and other calls do not usually allow coroutine
		3162	switches.
		3163
		3164
2730	=head1 COMPLEXITIES	3165	=head1 COMPLEXITIES
2731		3166
2732	In this section the complexities of (many of) the algorithms used inside	3167	In this section the complexities of (many of) the algorithms used inside
2733	libev will be explained. For complexity discussions about backends see the	3168	libev will be explained. For complexity discussions about backends see the
2734	documentation for C<ev_default_init>.	3169	documentation for C<ev_default_init>.
…		…
2750	=item Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)	3185	=item Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)
2751		3186
2752	That means that changing a timer costs less than removing/adding them	3187	That means that changing a timer costs less than removing/adding them
2753	as only the relative motion in the event queue has to be paid for.	3188	as only the relative motion in the event queue has to be paid for.
2754		3189
2755	=item Starting io/check/prepare/idle/signal/child watchers: O(1)	3190	=item Starting io/check/prepare/idle/signal/child/fork/async watchers: O(1)
2756		3191
2757	These just add the watcher into an array or at the head of a list.	3192	These just add the watcher into an array or at the head of a list.
2758		3193
2759	=item Stopping check/prepare/idle watchers: O(1)	3194	=item Stopping check/prepare/idle/fork/async watchers: O(1)
2760		3195
2761	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))	3196	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
2762		3197
2763	These watchers are stored in lists then need to be walked to find the	3198	These watchers are stored in lists then need to be walked to find the
2764	correct watcher to remove. The lists are usually short (you don't usually	3199	correct watcher to remove. The lists are usually short (you don't usually
2765	have many watchers waiting for the same fd or signal).	3200	have many watchers waiting for the same fd or signal).
2766		3201
2767	=item Finding the next timer in each loop iteration: O(1)	3202	=item Finding the next timer in each loop iteration: O(1)
2768		3203
2769	By virtue of using a binary heap, the next timer is always found at the	3204	By virtue of using a binary or 4-heap, the next timer is always found at a
2770	beginning of the storage array.	3205	fixed position in the storage array.
2771		3206
2772	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)	3207	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
2773		3208
2774	A change means an I/O watcher gets started or stopped, which requires	3209	A change means an I/O watcher gets started or stopped, which requires
2775	libev to recalculate its status (and possibly tell the kernel, depending	3210	libev to recalculate its status (and possibly tell the kernel, depending
…		…
2780	=item Priority handling: O(number_of_priorities)	3215	=item Priority handling: O(number_of_priorities)
2781		3216
2782	Priorities are implemented by allocating some space for each	3217	Priorities are implemented by allocating some space for each
2783	priority. When doing priority-based operations, libev usually has to	3218	priority. When doing priority-based operations, libev usually has to
2784	linearly search all the priorities, but starting/stopping and activating	3219	linearly search all the priorities, but starting/stopping and activating
2785	watchers becomes O(1) w.r.t. prioritiy handling.	3220	watchers becomes O(1) w.r.t. priority handling.
		3221
		3222	=item Sending an ev_async: O(1)
		3223
		3224	=item Processing ev_async_send: O(number_of_async_watchers)
		3225
		3226	=item Processing signals: O(max_signal_number)
		3227
		3228	Sending involves a syscall I<iff> there were no other C<ev_async_send>
		3229	calls in the current loop iteration. Checking for async and signal events
		3230	involves iterating over all running async watchers or all signal numbers.
2786		3231
2787	=back	3232	=back
2788		3233
2789		3234
2790	=head1 Win32 platform limitations and workarounds	3235	=head1 Win32 platform limitations and workarounds
…		…
2794	model. Libev still offers limited functionality on this platform in	3239	model. Libev still offers limited functionality on this platform in
2795	the form of the C<EVBACKEND_SELECT> backend, and only supports socket	3240	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
2796	descriptors. This only applies when using Win32 natively, not when using	3241	descriptors. This only applies when using Win32 natively, not when using
2797	e.g. cygwin.	3242	e.g. cygwin.
2798		3243
		3244	Lifting these limitations would basically require the full
		3245	re-implementation of the I/O system. If you are into these kinds of
		3246	things, then note that glib does exactly that for you in a very portable
		3247	way (note also that glib is the slowest event library known to man).
		3248
2799	There is no supported compilation method available on windows except	3249	There is no supported compilation method available on windows except
2800	embedding it into other applications.	3250	embedding it into other applications.
2801		3251
2802	Due to the many, low, and arbitrary limits on the win32 platform and the	3252	Due to the many, low, and arbitrary limits on the win32 platform and
2803	abysmal performance of winsockets, using a large number of sockets is not	3253	the abysmal performance of winsockets, using a large number of sockets
2804	recommended (and not reasonable). If your program needs to use more than	3254	is not recommended (and not reasonable). If your program needs to use
2805	a hundred or so sockets, then likely it needs to use a totally different	3255	more than a hundred or so sockets, then likely it needs to use a totally
2806	implementation for windows, as libev offers the POSIX model, which cannot	3256	different implementation for windows, as libev offers the POSIX readiness
2807	be implemented efficiently on windows (microsoft monopoly games).	3257	notification model, which cannot be implemented efficiently on windows
		3258	(microsoft monopoly games).
2808		3259
2809	=over 4	3260	=over 4
2810		3261
2811	=item The winsocket select function	3262	=item The winsocket select function
2812		3263
…		…
2826	Note that winsockets handling of fd sets is O(n), so you can easily get a	3277	Note that winsockets handling of fd sets is O(n), so you can easily get a
2827	complexity in the O(n²) range when using win32.	3278	complexity in the O(n²) range when using win32.
2828		3279
2829	=item Limited number of file descriptors	3280	=item Limited number of file descriptors
2830		3281
2831	Windows has numerous arbitrary (and low) limits on things. Early versions	3282	Windows has numerous arbitrary (and low) limits on things.
2832	of winsocket's select only supported waiting for a max. of C<64> handles	3283
		3284	Early versions of winsocket's select only supported waiting for a maximum
2833	(probably owning to the fact that all windows kernels can only wait for	3285	of C<64> handles (probably owning to the fact that all windows kernels
2834	C<64> things at the same time internally; microsoft recommends spawning a	3286	can only wait for C<64> things at the same time internally; microsoft
2835	chain of threads and wait for 63 handles and the previous thread in each).	3287	recommends spawning a chain of threads and wait for 63 handles and the
		3288	previous thread in each. Great).
2836		3289
2837	Newer versions support more handles, but you need to define C<FD_SETSIZE>	3290	Newer versions support more handles, but you need to define C<FD_SETSIZE>
2838	to some high number (e.g. C<2048>) before compiling the winsocket select	3291	to some high number (e.g. C<2048>) before compiling the winsocket select
2839	call (which might be in libev or elsewhere, for example, perl does its own	3292	call (which might be in libev or elsewhere, for example, perl does its own
2840	select emulation on windows).	3293	select emulation on windows).
…		…
2852	calling select (O(n²)) will likely make this unworkable.	3305	calling select (O(n²)) will likely make this unworkable.
2853		3306
2854	=back	3307	=back
2855		3308
2856		3309
		3310	=head1 PORTABILITY REQUIREMENTS
		3311
		3312	In addition to a working ISO-C implementation, libev relies on a few
		3313	additional extensions:
		3314
		3315	=over 4
		3316
		3317	=item C<sig_atomic_t volatile> must be thread-atomic as well
		3318
		3319	The type C<sig_atomic_t volatile> (or whatever is defined as
		3320	C<EV_ATOMIC_T>) must be atomic w.r.t. accesses from different
		3321	threads. This is not part of the specification for C<sig_atomic_t>, but is
		3322	believed to be sufficiently portable.
		3323
		3324	=item C<sigprocmask> must work in a threaded environment
		3325
		3326	Libev uses C<sigprocmask> to temporarily block signals. This is not
		3327	allowed in a threaded program (C<pthread_sigmask> has to be used). Typical
		3328	pthread implementations will either allow C<sigprocmask> in the "main
		3329	thread" or will block signals process-wide, both behaviours would
		3330	be compatible with libev. Interaction between C<sigprocmask> and
		3331	C<pthread_sigmask> could complicate things, however.
		3332
		3333	The most portable way to handle signals is to block signals in all threads
		3334	except the initial one, and run the default loop in the initial thread as
		3335	well.
		3336
		3337	=item C<long> must be large enough for common memory allocation sizes
		3338
		3339	To improve portability and simplify using libev, libev uses C<long>
		3340	internally instead of C<size_t> when allocating its data structures. On
		3341	non-POSIX systems (Microsoft...) this might be unexpectedly low, but
		3342	is still at least 31 bits everywhere, which is enough for hundreds of
		3343	millions of watchers.
		3344
		3345	=item C<double> must hold a time value in seconds with enough accuracy
		3346
		3347	The type C<double> is used to represent timestamps. It is required to
		3348	have at least 51 bits of mantissa (and 9 bits of exponent), which is good
		3349	enough for at least into the year 4000. This requirement is fulfilled by
		3350	implementations implementing IEEE 754 (basically all existing ones).
		3351
		3352	=back
		3353
		3354	If you know of other additional requirements drop me a note.
		3355
		3356
		3357	=head1 VALGRIND
		3358
		3359	Valgrind has a special section here because it is a popular tool that is
		3360	highly useful, but valgrind reports are very hard to interpret.
		3361
		3362	If you think you found a bug (memory leak, uninitialised data access etc.)
		3363	in libev, then check twice: If valgrind reports something like:
		3364
		3365	==2274== definitely lost: 0 bytes in 0 blocks.
		3366	==2274== possibly lost: 0 bytes in 0 blocks.
		3367	==2274== still reachable: 256 bytes in 1 blocks.
		3368
		3369	then there is no memory leak. Similarly, under some circumstances,
		3370	valgrind might report kernel bugs as if it were a bug in libev, or it
		3371	might be confused (it is a very good tool, but only a tool).
		3372
		3373	If you are unsure about something, feel free to contact the mailing list
		3374	with the full valgrind report and an explanation on why you think this is
		3375	a bug in libev. However, don't be annoyed when you get a brisk "this is
		3376	no bug" answer and take the chance of learning how to interpret valgrind
		3377	properly.
		3378
		3379	If you need, for some reason, empty reports from valgrind for your project
		3380	I suggest using suppression lists.
		3381
		3382
2857	=head1 AUTHOR	3383	=head1 AUTHOR
2858		3384
2859	Marc Lehmann <libev@schmorp.de>.	3385	Marc Lehmann <libev@schmorp.de>.
2860		3386

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing libev/ev.pod (file contents): Revision 1.114 by root, Mon Dec 31 01:31:30 2007 UTC vs. Revision 1.156 by root, Tue May 20 20:00:34 2008 UTC

Diff Legend

Comparing libev/ev.pod (file contents):
Revision 1.114 by root, Mon Dec 31 01:31:30 2007 UTC vs.
Revision 1.156 by root, Tue May 20 20:00:34 2008 UTC