ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.57 by root, Wed Nov 28 11:27:29 2007 UTC vs.
Revision 1.156 by root, Tue May 20 20:00:34 2008 UTC

…		…
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	#include <ev.h>	7	#include <ev.h>
8		8
9	=head1 EXAMPLE PROGRAM	9	=head2 EXAMPLE PROGRAM
10		10
		11	// a single header file is required
11	#include <ev.h>	12	#include <ev.h>
12		13
		14	// every watcher type has its own typedef'd struct
		15	// with the name ev_<type>
13	ev_io stdin_watcher;	16	ev_io stdin_watcher;
14	ev_timer timeout_watcher;	17	ev_timer timeout_watcher;
15		18
		19	// all watcher callbacks have a similar signature
16	/* called when data readable on stdin */	20	// this callback is called when data is readable on stdin
17	static void	21	static void
18	stdin_cb (EV_P_ struct ev_io *w, int revents)	22	stdin_cb (EV_P_ struct ev_io *w, int revents)
19	{	23	{
20	/* puts ("stdin ready"); */	24	puts ("stdin ready");
21	ev_io_stop (EV_A_ w); /* just a syntax example */	25	// for one-shot events, one must manually stop the watcher
22	ev_unloop (EV_A_ EVUNLOOP_ALL); /* leave all loop calls */	26	// with its corresponding stop function.
		27	ev_io_stop (EV_A_ w);
		28
		29	// this causes all nested ev_loop's to stop iterating
		30	ev_unloop (EV_A_ EVUNLOOP_ALL);
23	}	31	}
24		32
		33	// another callback, this time for a time-out
25	static void	34	static void
26	timeout_cb (EV_P_ struct ev_timer *w, int revents)	35	timeout_cb (EV_P_ struct ev_timer *w, int revents)
27	{	36	{
28	/* puts ("timeout"); */	37	puts ("timeout");
29	ev_unloop (EV_A_ EVUNLOOP_ONE); /* leave one loop call */	38	// this causes the innermost ev_loop to stop iterating
		39	ev_unloop (EV_A_ EVUNLOOP_ONE);
30	}	40	}
31		41
32	int	42	int
33	main (void)	43	main (void)
34	{	44	{
		45	// use the default event loop unless you have special needs
35	struct ev_loop *loop = ev_default_loop (0);	46	struct ev_loop *loop = ev_default_loop (0);
36		47
37	/* initialise an io watcher, then start it */	48	// initialise an io watcher, then start it
		49	// this one will watch for stdin to become readable
38	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	50	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
39	ev_io_start (loop, &stdin_watcher);	51	ev_io_start (loop, &stdin_watcher);
40		52
		53	// initialise a timer watcher, then start it
41	/* simple non-repeating 5.5 second timeout */	54	// simple non-repeating 5.5 second timeout
42	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	55	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
43	ev_timer_start (loop, &timeout_watcher);	56	ev_timer_start (loop, &timeout_watcher);
44		57
45	/* loop till timeout or data ready */	58	// now wait for events to arrive
46	ev_loop (loop, 0);	59	ev_loop (loop, 0);
47		60
		61	// unloop was called, so exit
48	return 0;	62	return 0;
49	}	63	}
50		64
51	=head1 DESCRIPTION	65	=head1 DESCRIPTION
52		66
		67	The newest version of this document is also available as an html-formatted
		68	web page you might find easier to navigate when reading it for the first
		69	time: L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.
		70
53	Libev is an event loop: you register interest in certain events (such as a	71	Libev is an event loop: you register interest in certain events (such as a
54	file descriptor being readable or a timeout occuring), and it will manage	72	file descriptor being readable or a timeout occurring), and it will manage
55	these event sources and provide your program with events.	73	these event sources and provide your program with events.
56		74
57	To do this, it must take more or less complete control over your process	75	To do this, it must take more or less complete control over your process
58	(or thread) by executing the I<event loop> handler, and will then	76	(or thread) by executing the I<event loop> handler, and will then
59	communicate events via a callback mechanism.	77	communicate events via a callback mechanism.
…		…
61	You register interest in certain events by registering so-called I<event	79	You register interest in certain events by registering so-called I<event
62	watchers>, which are relatively small C structures you initialise with the	80	watchers>, which are relatively small C structures you initialise with the
63	details of the event, and then hand it over to libev by I<starting> the	81	details of the event, and then hand it over to libev by I<starting> the
64	watcher.	82	watcher.
65		83
66	=head1 FEATURES	84	=head2 FEATURES
67		85
68	Libev supports C<select>, C<poll>, the linux-specific C<epoll>, the	86	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
69	bsd-specific C<kqueue> and the solaris-specific event port mechanisms	87	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
70	for file descriptor events (C<ev_io>), relative timers (C<ev_timer>),	88	for file descriptor events (C<ev_io>), the Linux C<inotify> interface
		89	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers
71	absolute timers with customised rescheduling (C<ev_periodic>), synchronous	90	with customised rescheduling (C<ev_periodic>), synchronous signals
72	signals (C<ev_signal>), process status change events (C<ev_child>), and	91	(C<ev_signal>), process status change events (C<ev_child>), and event
73	event watchers dealing with the event loop mechanism itself (C<ev_idle>,	92	watchers dealing with the event loop mechanism itself (C<ev_idle>,
74	C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as	93	C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as
75	file watchers (C<ev_stat>) and even limited support for fork events	94	file watchers (C<ev_stat>) and even limited support for fork events
76	(C<ev_fork>).	95	(C<ev_fork>).
77		96
78	It also is quite fast (see this	97	It also is quite fast (see this
79	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent	98	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
80	for example).	99	for example).
81		100
82	=head1 CONVENTIONS	101	=head2 CONVENTIONS
83		102
84	Libev is very configurable. In this manual the default configuration will	103	Libev is very configurable. In this manual the default (and most common)
85	be described, which supports multiple event loops. For more info about	104	configuration will be described, which supports multiple event loops. For
86	various configuration options please have a look at B<EMBED> section in	105	more info about various configuration options please have a look at
87	this manual. If libev was configured without support for multiple event	106	B<EMBED> section in this manual. If libev was configured without support
88	loops, then all functions taking an initial argument of name C<loop>	107	for multiple event loops, then all functions taking an initial argument of
89	(which is always of type C<struct ev_loop *>) will not have this argument.	108	name C<loop> (which is always of type C<struct ev_loop *>) will not have
		109	this argument.
90		110
91	=head1 TIME REPRESENTATION	111	=head2 TIME REPRESENTATION
92		112
93	Libev represents time as a single floating point number, representing the	113	Libev represents time as a single floating point number, representing the
94	(fractional) number of seconds since the (POSIX) epoch (somewhere near	114	(fractional) number of seconds since the (POSIX) epoch (somewhere near
95	the beginning of 1970, details are complicated, don't ask). This type is	115	the beginning of 1970, details are complicated, don't ask). This type is
96	called C<ev_tstamp>, which is what you should use too. It usually aliases	116	called C<ev_tstamp>, which is what you should use too. It usually aliases
97	to the C<double> type in C, and when you need to do any calculations on	117	to the C<double> type in C, and when you need to do any calculations on
98	it, you should treat it as such.	118	it, you should treat it as some floatingpoint value. Unlike the name
		119	component C<stamp> might indicate, it is also used for time differences
		120	throughout libev.
99		121
100	=head1 GLOBAL FUNCTIONS	122	=head1 GLOBAL FUNCTIONS
101		123
102	These functions can be called anytime, even before initialising the	124	These functions can be called anytime, even before initialising the
103	library in any way.	125	library in any way.
…		…
108		130
109	Returns the current time as libev would use it. Please note that the	131	Returns the current time as libev would use it. Please note that the
110	C<ev_now> function is usually faster and also often returns the timestamp	132	C<ev_now> function is usually faster and also often returns the timestamp
111	you actually want to know.	133	you actually want to know.
112		134
		135	=item ev_sleep (ev_tstamp interval)
		136
		137	Sleep for the given interval: The current thread will be blocked until
		138	either it is interrupted or the given time interval has passed. Basically
		139	this is a subsecond-resolution C<sleep ()>.
		140
113	=item int ev_version_major ()	141	=item int ev_version_major ()
114		142
115	=item int ev_version_minor ()	143	=item int ev_version_minor ()
116		144
117	You can find out the major and minor version numbers of the library	145	You can find out the major and minor ABI version numbers of the library
118	you linked against by calling the functions C<ev_version_major> and	146	you linked against by calling the functions C<ev_version_major> and
119	C<ev_version_minor>. If you want, you can compare against the global	147	C<ev_version_minor>. If you want, you can compare against the global
120	symbols C<EV_VERSION_MAJOR> and C<EV_VERSION_MINOR>, which specify the	148	symbols C<EV_VERSION_MAJOR> and C<EV_VERSION_MINOR>, which specify the
121	version of the library your program was compiled against.	149	version of the library your program was compiled against.
122		150
		151	These version numbers refer to the ABI version of the library, not the
		152	release version.
		153
123	Usually, it's a good idea to terminate if the major versions mismatch,	154	Usually, it's a good idea to terminate if the major versions mismatch,
124	as this indicates an incompatible change. Minor versions are usually	155	as this indicates an incompatible change. Minor versions are usually
125	compatible to older versions, so a larger minor version alone is usually	156	compatible to older versions, so a larger minor version alone is usually
126	not a problem.	157	not a problem.
127		158
128	Example: Make sure we haven't accidentally been linked against the wrong	159	Example: Make sure we haven't accidentally been linked against the wrong
129	version.	160	version.
…		…
162	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for	193	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for
163	recommended ones.	194	recommended ones.
164		195
165	See the description of C<ev_embed> watchers for more info.	196	See the description of C<ev_embed> watchers for more info.
166		197
167	=item ev_set_allocator (void *(*cb)(void *ptr, size_t size))	198	=item ev_set_allocator (void *(*cb)(void *ptr, long size))
168		199
169	Sets the allocation function to use (the prototype and semantics are	200	Sets the allocation function to use (the prototype is similar - the
170	identical to the realloc C function). It is used to allocate and free	201	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
171	memory (no surprises here). If it returns zero when memory needs to be	202	used to allocate and free memory (no surprises here). If it returns zero
172	allocated, the library might abort or take some potentially destructive	203	when memory needs to be allocated (C<size != 0>), the library might abort
173	action. The default is your system realloc function.	204	or take some potentially destructive action.
		205
		206	Since some systems (at least OpenBSD and Darwin) fail to implement
		207	correct C<realloc> semantics, libev will use a wrapper around the system
		208	C<realloc> and C<free> functions by default.
174		209
175	You could override this function in high-availability programs to, say,	210	You could override this function in high-availability programs to, say,
176	free some memory if it cannot allocate memory, to use a special allocator,	211	free some memory if it cannot allocate memory, to use a special allocator,
177	or even to sleep a while and retry until some memory is available.	212	or even to sleep a while and retry until some memory is available.
178		213
179	Example: Replace the libev allocator with one that waits a bit and then	214	Example: Replace the libev allocator with one that waits a bit and then
180	retries).	215	retries (example requires a standards-compliant C<realloc>).
181		216
182	static void *	217	static void *
183	persistent_realloc (void *ptr, size_t size)	218	persistent_realloc (void *ptr, size_t size)
184	{	219	{
185	for (;;)	220	for (;;)
…		…
224		259
225	An event loop is described by a C<struct ev_loop *>. The library knows two	260	An event loop is described by a C<struct ev_loop *>. The library knows two
226	types of such loops, the I<default> loop, which supports signals and child	261	types of such loops, the I<default> loop, which supports signals and child
227	events, and dynamically created loops which do not.	262	events, and dynamically created loops which do not.
228		263
229	If you use threads, a common model is to run the default event loop
230	in your main thread (or in a separate thread) and for each thread you
231	create, you also create another event loop. Libev itself does no locking
232	whatsoever, so if you mix calls to the same event loop in different
233	threads, make sure you lock (this is usually a bad idea, though, even if
234	done correctly, because it's hideous and inefficient).
235
236	=over 4	264	=over 4
237		265
238	=item struct ev_loop *ev_default_loop (unsigned int flags)	266	=item struct ev_loop *ev_default_loop (unsigned int flags)
239		267
240	This will initialise the default event loop if it hasn't been initialised	268	This will initialise the default event loop if it hasn't been initialised
…		…
242	false. If it already was initialised it simply returns it (and ignores the	270	false. If it already was initialised it simply returns it (and ignores the
243	flags. If that is troubling you, check C<ev_backend ()> afterwards).	271	flags. If that is troubling you, check C<ev_backend ()> afterwards).
244		272
245	If you don't know what event loop to use, use the one returned from this	273	If you don't know what event loop to use, use the one returned from this
246	function.	274	function.
		275
		276	Note that this function is I<not> thread-safe, so if you want to use it
		277	from multiple threads, you have to lock (note also that this is unlikely,
		278	as loops cannot bes hared easily between threads anyway).
		279
		280	The default loop is the only loop that can handle C<ev_signal> and
		281	C<ev_child> watchers, and to do this, it always registers a handler
		282	for C<SIGCHLD>. If this is a problem for your app you can either
		283	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you
		284	can simply overwrite the C<SIGCHLD> signal handler I<after> calling
		285	C<ev_default_init>.
247		286
248	The flags argument can be used to specify special behaviour or specific	287	The flags argument can be used to specify special behaviour or specific
249	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	288	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
250		289
251	The following flags are supported:	290	The following flags are supported:
…		…
264	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will	303	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will
265	override the flags completely if it is found in the environment. This is	304	override the flags completely if it is found in the environment. This is
266	useful to try out specific backends to test their performance, or to work	305	useful to try out specific backends to test their performance, or to work
267	around bugs.	306	around bugs.
268		307
		308	=item C<EVFLAG_FORKCHECK>
		309
		310	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after
		311	a fork, you can also make libev check for a fork in each iteration by
		312	enabling this flag.
		313
		314	This works by calling C<getpid ()> on every iteration of the loop,
		315	and thus this might slow down your event loop if you do a lot of loop
		316	iterations and little real work, but is usually not noticeable (on my
		317	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence
		318	without a syscall and thus I<very> fast, but my GNU/Linux system also has
		319	C<pthread_atfork> which is even faster).
		320
		321	The big advantage of this flag is that you can forget about fork (and
		322	forget about forgetting to tell libev about forking) when you use this
		323	flag.
		324
		325	This flag setting cannot be overriden or specified in the C<LIBEV_FLAGS>
		326	environment variable.
		327
269	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	328	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
270		329
271	This is your standard select(2) backend. Not I<completely> standard, as	330	This is your standard select(2) backend. Not I<completely> standard, as
272	libev tries to roll its own fd_set with no limits on the number of fds,	331	libev tries to roll its own fd_set with no limits on the number of fds,
273	but if that fails, expect a fairly low limit on the number of fds when	332	but if that fails, expect a fairly low limit on the number of fds when
274	using this backend. It doesn't scale too well (O(highest_fd)), but its usually	333	using this backend. It doesn't scale too well (O(highest_fd)), but its
275	the fastest backend for a low number of fds.	334	usually the fastest backend for a low number of (low-numbered :) fds.
		335
		336	To get good performance out of this backend you need a high amount of
		337	parallelity (most of the file descriptors should be busy). If you are
		338	writing a server, you should C<accept ()> in a loop to accept as many
		339	connections as possible during one iteration. You might also want to have
		340	a look at C<ev_set_io_collect_interval ()> to increase the amount of
		341	readiness notifications you get per iteration.
276		342
277	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)	343	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)
278		344
279	And this is your standard poll(2) backend. It's more complicated than	345	And this is your standard poll(2) backend. It's more complicated
280	select, but handles sparse fds better and has no artificial limit on the	346	than select, but handles sparse fds better and has no artificial
281	number of fds you can use (except it will slow down considerably with a	347	limit on the number of fds you can use (except it will slow down
282	lot of inactive fds). It scales similarly to select, i.e. O(total_fds).	348	considerably with a lot of inactive fds). It scales similarly to select,
		349	i.e. O(total_fds). See the entry for C<EVBACKEND_SELECT>, above, for
		350	performance tips.
283		351
284	=item C<EVBACKEND_EPOLL> (value 4, Linux)	352	=item C<EVBACKEND_EPOLL> (value 4, Linux)
285		353
286	For few fds, this backend is a bit little slower than poll and select,	354	For few fds, this backend is a bit little slower than poll and select,
287	but it scales phenomenally better. While poll and select usually scale like	355	but it scales phenomenally better. While poll and select usually scale
288	O(total_fds) where n is the total number of fds (or the highest fd), epoll scales	356	like O(total_fds) where n is the total number of fds (or the highest fd),
289	either O(1) or O(active_fds).	357	epoll scales either O(1) or O(active_fds). The epoll design has a number
		358	of shortcomings, such as silently dropping events in some hard-to-detect
		359	cases and requiring a syscall per fd change, no fork support and bad
		360	support for dup.
290		361
291	While stopping and starting an I/O watcher in the same iteration will	362	While stopping, setting and starting an I/O watcher in the same iteration
292	result in some caching, there is still a syscall per such incident	363	will result in some caching, there is still a syscall per such incident
293	(because the fd could point to a different file description now), so its	364	(because the fd could point to a different file description now), so its
294	best to avoid that. Also, dup()ed file descriptors might not work very	365	best to avoid that. Also, C<dup ()>'ed file descriptors might not work
295	well if you register events for both fds.	366	very well if you register events for both fds.
296		367
297	Please note that epoll sometimes generates spurious notifications, so you	368	Please note that epoll sometimes generates spurious notifications, so you
298	need to use non-blocking I/O or other means to avoid blocking when no data	369	need to use non-blocking I/O or other means to avoid blocking when no data
299	(or space) is available.	370	(or space) is available.
300		371
		372	Best performance from this backend is achieved by not unregistering all
		373	watchers for a file descriptor until it has been closed, if possible, i.e.
		374	keep at least one watcher active per fd at all times.
		375
		376	While nominally embeddeble in other event loops, this feature is broken in
		377	all kernel versions tested so far.
		378
301	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	379	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
302		380
303	Kqueue deserves special mention, as at the time of this writing, it	381	Kqueue deserves special mention, as at the time of this writing, it
304	was broken on all BSDs except NetBSD (usually it doesn't work with	382	was broken on all BSDs except NetBSD (usually it doesn't work reliably
305	anything but sockets and pipes, except on Darwin, where of course its	383	with anything but sockets and pipes, except on Darwin, where of course
306	completely useless). For this reason its not being "autodetected"	384	it's completely useless). For this reason it's not being "autodetected"
307	unless you explicitly specify it explicitly in the flags (i.e. using	385	unless you explicitly specify it explicitly in the flags (i.e. using
308	C<EVBACKEND_KQUEUE>).	386	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)
		387	system like NetBSD.
		388
		389	You still can embed kqueue into a normal poll or select backend and use it
		390	only for sockets (after having made sure that sockets work with kqueue on
		391	the target platform). See C<ev_embed> watchers for more info.
309		392
310	It scales in the same way as the epoll backend, but the interface to the	393	It scales in the same way as the epoll backend, but the interface to the
311	kernel is more efficient (which says nothing about its actual speed, of	394	kernel is more efficient (which says nothing about its actual speed, of
312	course). While starting and stopping an I/O watcher does not cause an	395	course). While stopping, setting and starting an I/O watcher does never
313	extra syscall as with epoll, it still adds up to four event changes per	396	cause an extra syscall as with C<EVBACKEND_EPOLL>, it still adds up to
314	incident, so its best to avoid that.	397	two event changes per incident, support for C<fork ()> is very bad and it
		398	drops fds silently in similarly hard-to-detect cases.
		399
		400	This backend usually performs well under most conditions.
		401
		402	While nominally embeddable in other event loops, this doesn't work
		403	everywhere, so you might need to test for this. And since it is broken
		404	almost everywhere, you should only use it when you have a lot of sockets
		405	(for which it usually works), by embedding it into another event loop
		406	(e.g. C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>) and using it only for
		407	sockets.
315		408
316	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)	409	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)
317		410
318	This is not implemented yet (and might never be).	411	This is not implemented yet (and might never be, unless you send me an
		412	implementation). According to reports, C</dev/poll> only supports sockets
		413	and is not embeddable, which would limit the usefulness of this backend
		414	immensely.
319		415
320	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	416	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
321		417
322	This uses the Solaris 10 port mechanism. As with everything on Solaris,	418	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
323	it's really slow, but it still scales very well (O(active_fds)).	419	it's really slow, but it still scales very well (O(active_fds)).
324		420
325	Please note that solaris ports can result in a lot of spurious	421	Please note that solaris event ports can deliver a lot of spurious
326	notifications, so you need to use non-blocking I/O or other means to avoid	422	notifications, so you need to use non-blocking I/O or other means to avoid
327	blocking when no data (or space) is available.	423	blocking when no data (or space) is available.
		424
		425	While this backend scales well, it requires one system call per active
		426	file descriptor per loop iteration. For small and medium numbers of file
		427	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
		428	might perform better.
		429
		430	On the positive side, ignoring the spurious readiness notifications, this
		431	backend actually performed to specification in all tests and is fully
		432	embeddable, which is a rare feat among the OS-specific backends.
328		433
329	=item C<EVBACKEND_ALL>	434	=item C<EVBACKEND_ALL>
330		435
331	Try all backends (even potentially broken ones that wouldn't be tried	436	Try all backends (even potentially broken ones that wouldn't be tried
332	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	437	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
333	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	438	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
334		439
		440	It is definitely not recommended to use this flag.
		441
335	=back	442	=back
336		443
337	If one or more of these are ored into the flags value, then only these	444	If one or more of these are ored into the flags value, then only these
338	backends will be tried (in the reverse order as given here). If none are	445	backends will be tried (in the reverse order as listed here). If none are
339	specified, most compiled-in backend will be tried, usually in reverse	446	specified, all backends in C<ev_recommended_backends ()> will be tried.
340	order of their flag values :)
341		447
342	The most typical usage is like this:	448	The most typical usage is like this:
343		449
344	if (!ev_default_loop (0))	450	if (!ev_default_loop (0))
345	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");	451	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
…		…
359		465
360	Similar to C<ev_default_loop>, but always creates a new event loop that is	466	Similar to C<ev_default_loop>, but always creates a new event loop that is
361	always distinct from the default loop. Unlike the default loop, it cannot	467	always distinct from the default loop. Unlike the default loop, it cannot
362	handle signal and child watchers, and attempts to do so will be greeted by	468	handle signal and child watchers, and attempts to do so will be greeted by
363	undefined behaviour (or a failed assertion if assertions are enabled).	469	undefined behaviour (or a failed assertion if assertions are enabled).
		470
		471	Note that this function I<is> thread-safe, and the recommended way to use
		472	libev with threads is indeed to create one loop per thread, and using the
		473	default loop in the "main" or "initial" thread.
364		474
365	Example: Try to create a event loop that uses epoll and nothing else.	475	Example: Try to create a event loop that uses epoll and nothing else.
366		476
367	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	477	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
368	if (!epoller)	478	if (!epoller)
…		…
373	Destroys the default loop again (frees all memory and kernel state	483	Destroys the default loop again (frees all memory and kernel state
374	etc.). None of the active event watchers will be stopped in the normal	484	etc.). None of the active event watchers will be stopped in the normal
375	sense, so e.g. C<ev_is_active> might still return true. It is your	485	sense, so e.g. C<ev_is_active> might still return true. It is your
376	responsibility to either stop all watchers cleanly yoursef I<before>	486	responsibility to either stop all watchers cleanly yoursef I<before>
377	calling this function, or cope with the fact afterwards (which is usually	487	calling this function, or cope with the fact afterwards (which is usually
378	the easiest thing, youc na just ignore the watchers and/or C<free ()> them	488	the easiest thing, you can just ignore the watchers and/or C<free ()> them
379	for example).	489	for example).
		490
		491	Note that certain global state, such as signal state, will not be freed by
		492	this function, and related watchers (such as signal and child watchers)
		493	would need to be stopped manually.
		494
		495	In general it is not advisable to call this function except in the
		496	rare occasion where you really need to free e.g. the signal handling
		497	pipe fds. If you need dynamically allocated loops it is better to use
		498	C<ev_loop_new> and C<ev_loop_destroy>).
380		499
381	=item ev_loop_destroy (loop)	500	=item ev_loop_destroy (loop)
382		501
383	Like C<ev_default_destroy>, but destroys an event loop created by an	502	Like C<ev_default_destroy>, but destroys an event loop created by an
384	earlier call to C<ev_loop_new>.	503	earlier call to C<ev_loop_new>.
385		504
386	=item ev_default_fork ()	505	=item ev_default_fork ()
387		506
		507	This function sets a flag that causes subsequent C<ev_loop> iterations
388	This function reinitialises the kernel state for backends that have	508	to reinitialise the kernel state for backends that have one. Despite the
389	one. Despite the name, you can call it anytime, but it makes most sense	509	name, you can call it anytime, but it makes most sense after forking, in
390	after forking, in either the parent or child process (or both, but that	510	the child process (or both child and parent, but that again makes little
391	again makes little sense).	511	sense). You I<must> call it in the child before using any of the libev
		512	functions, and it will only take effect at the next C<ev_loop> iteration.
392		513
393	You I<must> call this function in the child process after forking if and	514	On the other hand, you only need to call this function in the child
394	only if you want to use the event library in both processes. If you just	515	process if and only if you want to use the event library in the child. If
395	fork+exec, you don't have to call it.	516	you just fork+exec, you don't have to call it at all.
396		517
397	The function itself is quite fast and it's usually not a problem to call	518	The function itself is quite fast and it's usually not a problem to call
398	it just in case after a fork. To make this easy, the function will fit in	519	it just in case after a fork. To make this easy, the function will fit in
399	quite nicely into a call to C<pthread_atfork>:	520	quite nicely into a call to C<pthread_atfork>:
400		521
401	pthread_atfork (0, 0, ev_default_fork);	522	pthread_atfork (0, 0, ev_default_fork);
402		523
403	At the moment, C<EVBACKEND_SELECT> and C<EVBACKEND_POLL> are safe to use
404	without calling this function, so if you force one of those backends you
405	do not need to care.
406
407	=item ev_loop_fork (loop)	524	=item ev_loop_fork (loop)
408		525
409	Like C<ev_default_fork>, but acts on an event loop created by	526	Like C<ev_default_fork>, but acts on an event loop created by
410	C<ev_loop_new>. Yes, you have to call this on every allocated event loop	527	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
411	after fork, and how you do this is entirely your own problem.	528	after fork, and how you do this is entirely your own problem.
		529
		530	=item int ev_is_default_loop (loop)
		531
		532	Returns true when the given loop actually is the default loop, false otherwise.
		533
		534	=item unsigned int ev_loop_count (loop)
		535
		536	Returns the count of loop iterations for the loop, which is identical to
		537	the number of times libev did poll for new events. It starts at C<0> and
		538	happily wraps around with enough iterations.
		539
		540	This value can sometimes be useful as a generation counter of sorts (it
		541	"ticks" the number of loop iterations), as it roughly corresponds with
		542	C<ev_prepare> and C<ev_check> calls.
412		543
413	=item unsigned int ev_backend (loop)	544	=item unsigned int ev_backend (loop)
414		545
415	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	546	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
416	use.	547	use.
…		…
419		550
420	Returns the current "event loop time", which is the time the event loop	551	Returns the current "event loop time", which is the time the event loop
421	received events and started processing them. This timestamp does not	552	received events and started processing them. This timestamp does not
422	change as long as callbacks are being processed, and this is also the base	553	change as long as callbacks are being processed, and this is also the base
423	time used for relative timers. You can treat it as the timestamp of the	554	time used for relative timers. You can treat it as the timestamp of the
424	event occuring (or more correctly, libev finding out about it).	555	event occurring (or more correctly, libev finding out about it).
425		556
426	=item ev_loop (loop, int flags)	557	=item ev_loop (loop, int flags)
427		558
428	Finally, this is it, the event handler. This function usually is called	559	Finally, this is it, the event handler. This function usually is called
429	after you initialised all your watchers and you want to start handling	560	after you initialised all your watchers and you want to start handling
…		…
450	libev watchers. However, a pair of C<ev_prepare>/C<ev_check> watchers is	581	libev watchers. However, a pair of C<ev_prepare>/C<ev_check> watchers is
451	usually a better approach for this kind of thing.	582	usually a better approach for this kind of thing.
452		583
453	Here are the gory details of what C<ev_loop> does:	584	Here are the gory details of what C<ev_loop> does:
454		585
455	* If there are no active watchers (reference count is zero), return.	586	- Before the first iteration, call any pending watchers.
456	- Queue prepare watchers and then call all outstanding watchers.	587	* If EVFLAG_FORKCHECK was used, check for a fork.
		588	- If a fork was detected, queue and call all fork watchers.
		589	- Queue and call all prepare watchers.
457	- If we have been forked, recreate the kernel state.	590	- If we have been forked, recreate the kernel state.
458	- Update the kernel state with all outstanding changes.	591	- Update the kernel state with all outstanding changes.
459	- Update the "event loop time".	592	- Update the "event loop time".
460	- Calculate for how long to block.	593	- Calculate for how long to sleep or block, if at all
		594	(active idle watchers, EVLOOP_NONBLOCK or not having
		595	any active watchers at all will result in not sleeping).
		596	- Sleep if the I/O and timer collect interval say so.
461	- Block the process, waiting for any events.	597	- Block the process, waiting for any events.
462	- Queue all outstanding I/O (fd) events.	598	- Queue all outstanding I/O (fd) events.
463	- Update the "event loop time" and do time jump handling.	599	- Update the "event loop time" and do time jump handling.
464	- Queue all outstanding timers.	600	- Queue all outstanding timers.
465	- Queue all outstanding periodics.	601	- Queue all outstanding periodics.
466	- If no events are pending now, queue all idle watchers.	602	- If no events are pending now, queue all idle watchers.
467	- Queue all check watchers.	603	- Queue all check watchers.
468	- Call all queued watchers in reverse order (i.e. check watchers first).	604	- Call all queued watchers in reverse order (i.e. check watchers first).
469	Signals and child watchers are implemented as I/O watchers, and will	605	Signals and child watchers are implemented as I/O watchers, and will
470	be handled here by queueing them when their watcher gets executed.	606	be handled here by queueing them when their watcher gets executed.
471	- If ev_unloop has been called or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	607	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK
472	were used, return, otherwise continue with step *.	608	were used, or there are no active watchers, return, otherwise
		609	continue with step *.
473		610
474	Example: Queue some jobs and then loop until no events are outsanding	611	Example: Queue some jobs and then loop until no events are outstanding
475	anymore.	612	anymore.
476		613
477	... queue jobs here, make sure they register event watchers as long	614	... queue jobs here, make sure they register event watchers as long
478	... as they still have work to do (even an idle watcher will do..)	615	... as they still have work to do (even an idle watcher will do..)
479	ev_loop (my_loop, 0);	616	ev_loop (my_loop, 0);
…		…
483		620
484	Can be used to make a call to C<ev_loop> return early (but only after it	621	Can be used to make a call to C<ev_loop> return early (but only after it
485	has processed all outstanding events). The C<how> argument must be either	622	has processed all outstanding events). The C<how> argument must be either
486	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	623	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or
487	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	624	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.
		625
		626	This "unloop state" will be cleared when entering C<ev_loop> again.
488		627
489	=item ev_ref (loop)	628	=item ev_ref (loop)
490		629
491	=item ev_unref (loop)	630	=item ev_unref (loop)
492		631
…		…
497	returning, ev_unref() after starting, and ev_ref() before stopping it. For	636	returning, ev_unref() after starting, and ev_ref() before stopping it. For
498	example, libev itself uses this for its internal signal pipe: It is not	637	example, libev itself uses this for its internal signal pipe: It is not
499	visible to the libev user and should not keep C<ev_loop> from exiting if	638	visible to the libev user and should not keep C<ev_loop> from exiting if
500	no event watchers registered by it are active. It is also an excellent	639	no event watchers registered by it are active. It is also an excellent
501	way to do this for generic recurring timers or from within third-party	640	way to do this for generic recurring timers or from within third-party
502	libraries. Just remember to I<unref after start> and I<ref before stop>.	641	libraries. Just remember to I<unref after start> and I<ref before stop>
		642	(but only if the watcher wasn't active before, or was active before,
		643	respectively).
503		644
504	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	645	Example: Create a signal watcher, but keep it from keeping C<ev_loop>
505	running when nothing else is active.	646	running when nothing else is active.
506		647
507	struct ev_signal exitsig;	648	struct ev_signal exitsig;
…		…
511		652
512	Example: For some weird reason, unregister the above signal handler again.	653	Example: For some weird reason, unregister the above signal handler again.
513		654
514	ev_ref (loop);	655	ev_ref (loop);
515	ev_signal_stop (loop, &exitsig);	656	ev_signal_stop (loop, &exitsig);
		657
		658	=item ev_set_io_collect_interval (loop, ev_tstamp interval)
		659
		660	=item ev_set_timeout_collect_interval (loop, ev_tstamp interval)
		661
		662	These advanced functions influence the time that libev will spend waiting
		663	for events. Both are by default C<0>, meaning that libev will try to
		664	invoke timer/periodic callbacks and I/O callbacks with minimum latency.
		665
		666	Setting these to a higher value (the C<interval> I<must> be >= C<0>)
		667	allows libev to delay invocation of I/O and timer/periodic callbacks to
		668	increase efficiency of loop iterations.
		669
		670	The background is that sometimes your program runs just fast enough to
		671	handle one (or very few) event(s) per loop iteration. While this makes
		672	the program responsive, it also wastes a lot of CPU time to poll for new
		673	events, especially with backends like C<select ()> which have a high
		674	overhead for the actual polling but can deliver many events at once.
		675
		676	By setting a higher I<io collect interval> you allow libev to spend more
		677	time collecting I/O events, so you can handle more events per iteration,
		678	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
		679	C<ev_timer>) will be not affected. Setting this to a non-null value will
		680	introduce an additional C<ev_sleep ()> call into most loop iterations.
		681
		682	Likewise, by setting a higher I<timeout collect interval> you allow libev
		683	to spend more time collecting timeouts, at the expense of increased
		684	latency (the watcher callback will be called later). C<ev_io> watchers
		685	will not be affected. Setting this to a non-null value will not introduce
		686	any overhead in libev.
		687
		688	Many (busy) programs can usually benefit by setting the io collect
		689	interval to a value near C<0.1> or so, which is often enough for
		690	interactive servers (of course not for games), likewise for timeouts. It
		691	usually doesn't make much sense to set it to a lower value than C<0.01>,
		692	as this approsaches the timing granularity of most systems.
516		693
517	=back	694	=back
518		695
519		696
520	=head1 ANATOMY OF A WATCHER	697	=head1 ANATOMY OF A WATCHER
…		…
620	=item C<EV_FORK>	797	=item C<EV_FORK>
621		798
622	The event loop has been resumed in the child process after fork (see	799	The event loop has been resumed in the child process after fork (see
623	C<ev_fork>).	800	C<ev_fork>).
624		801
		802	=item C<EV_ASYNC>
		803
		804	The given async watcher has been asynchronously notified (see C<ev_async>).
		805
625	=item C<EV_ERROR>	806	=item C<EV_ERROR>
626		807
627	An unspecified error has occured, the watcher has been stopped. This might	808	An unspecified error has occured, the watcher has been stopped. This might
628	happen because the watcher could not be properly started because libev	809	happen because the watcher could not be properly started because libev
629	ran out of memory, a file descriptor was found to be closed or any other	810	ran out of memory, a file descriptor was found to be closed or any other
…		…
700	=item bool ev_is_pending (ev_TYPE *watcher)	881	=item bool ev_is_pending (ev_TYPE *watcher)
701		882
702	Returns a true value iff the watcher is pending, (i.e. it has outstanding	883	Returns a true value iff the watcher is pending, (i.e. it has outstanding
703	events but its callback has not yet been invoked). As long as a watcher	884	events but its callback has not yet been invoked). As long as a watcher
704	is pending (but not active) you must not call an init function on it (but	885	is pending (but not active) you must not call an init function on it (but
705	C<ev_TYPE_set> is safe) and you must make sure the watcher is available to	886	C<ev_TYPE_set> is safe), you must not change its priority, and you must
706	libev (e.g. you cnanot C<free ()> it).	887	make sure the watcher is available to libev (e.g. you cannot C<free ()>
		888	it).
707		889
708	=item callback ev_cb (ev_TYPE *watcher)	890	=item callback ev_cb (ev_TYPE *watcher)
709		891
710	Returns the callback currently set on the watcher.	892	Returns the callback currently set on the watcher.
711		893
712	=item ev_cb_set (ev_TYPE *watcher, callback)	894	=item ev_cb_set (ev_TYPE *watcher, callback)
713		895
714	Change the callback. You can change the callback at virtually any time	896	Change the callback. You can change the callback at virtually any time
715	(modulo threads).	897	(modulo threads).
		898
		899	=item ev_set_priority (ev_TYPE *watcher, priority)
		900
		901	=item int ev_priority (ev_TYPE *watcher)
		902
		903	Set and query the priority of the watcher. The priority is a small
		904	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
		905	(default: C<-2>). Pending watchers with higher priority will be invoked
		906	before watchers with lower priority, but priority will not keep watchers
		907	from being executed (except for C<ev_idle> watchers).
		908
		909	This means that priorities are I<only> used for ordering callback
		910	invocation after new events have been received. This is useful, for
		911	example, to reduce latency after idling, or more often, to bind two
		912	watchers on the same event and make sure one is called first.
		913
		914	If you need to suppress invocation when higher priority events are pending
		915	you need to look at C<ev_idle> watchers, which provide this functionality.
		916
		917	You I<must not> change the priority of a watcher as long as it is active or
		918	pending.
		919
		920	The default priority used by watchers when no priority has been set is
		921	always C<0>, which is supposed to not be too high and not be too low :).
		922
		923	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is
		924	fine, as long as you do not mind that the priority value you query might
		925	or might not have been adjusted to be within valid range.
		926
		927	=item ev_invoke (loop, ev_TYPE *watcher, int revents)
		928
		929	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
		930	C<loop> nor C<revents> need to be valid as long as the watcher callback
		931	can deal with that fact.
		932
		933	=item int ev_clear_pending (loop, ev_TYPE *watcher)
		934
		935	If the watcher is pending, this function returns clears its pending status
		936	and returns its C<revents> bitset (as if its callback was invoked). If the
		937	watcher isn't pending it does nothing and returns C<0>.
716		938
717	=back	939	=back
718		940
719		941
720	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	942	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
…		…
805	In general you can register as many read and/or write event watchers per	1027	In general you can register as many read and/or write event watchers per
806	fd as you want (as long as you don't confuse yourself). Setting all file	1028	fd as you want (as long as you don't confuse yourself). Setting all file
807	descriptors to non-blocking mode is also usually a good idea (but not	1029	descriptors to non-blocking mode is also usually a good idea (but not
808	required if you know what you are doing).	1030	required if you know what you are doing).
809		1031
810	You have to be careful with dup'ed file descriptors, though. Some backends
811	(the linux epoll backend is a notable example) cannot handle dup'ed file
812	descriptors correctly if you register interest in two or more fds pointing
813	to the same underlying file/socket/etc. description (that is, they share
814	the same underlying "file open").
815
816	If you must do this, then force the use of a known-to-be-good backend	1032	If you must do this, then force the use of a known-to-be-good backend
817	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and	1033	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and
818	C<EVBACKEND_POLL>).	1034	C<EVBACKEND_POLL>).
819		1035
820	Another thing you have to watch out for is that it is quite easy to	1036	Another thing you have to watch out for is that it is quite easy to
821	receive "spurious" readyness notifications, that is your callback might	1037	receive "spurious" readiness notifications, that is your callback might
822	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1038	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
823	because there is no data. Not only are some backends known to create a	1039	because there is no data. Not only are some backends known to create a
824	lot of those (for example solaris ports), it is very easy to get into	1040	lot of those (for example solaris ports), it is very easy to get into
825	this situation even with a relatively standard program structure. Thus	1041	this situation even with a relatively standard program structure. Thus
826	it is best to always use non-blocking I/O: An extra C<read>(2) returning	1042	it is best to always use non-blocking I/O: An extra C<read>(2) returning
827	C<EAGAIN> is far preferable to a program hanging until some data arrives.	1043	C<EAGAIN> is far preferable to a program hanging until some data arrives.
828		1044
829	If you cannot run the fd in non-blocking mode (for example you should not	1045	If you cannot run the fd in non-blocking mode (for example you should not
830	play around with an Xlib connection), then you have to seperately re-test	1046	play around with an Xlib connection), then you have to seperately re-test
831	wether a file descriptor is really ready with a known-to-be good interface	1047	whether a file descriptor is really ready with a known-to-be good interface
832	such as poll (fortunately in our Xlib example, Xlib already does this on	1048	such as poll (fortunately in our Xlib example, Xlib already does this on
833	its own, so its quite safe to use).	1049	its own, so its quite safe to use).
		1050
		1051	=head3 The special problem of disappearing file descriptors
		1052
		1053	Some backends (e.g. kqueue, epoll) need to be told about closing a file
		1054	descriptor (either by calling C<close> explicitly or by any other means,
		1055	such as C<dup>). The reason is that you register interest in some file
		1056	descriptor, but when it goes away, the operating system will silently drop
		1057	this interest. If another file descriptor with the same number then is
		1058	registered with libev, there is no efficient way to see that this is, in
		1059	fact, a different file descriptor.
		1060
		1061	To avoid having to explicitly tell libev about such cases, libev follows
		1062	the following policy: Each time C<ev_io_set> is being called, libev
		1063	will assume that this is potentially a new file descriptor, otherwise
		1064	it is assumed that the file descriptor stays the same. That means that
		1065	you I<have> to call C<ev_io_set> (or C<ev_io_init>) when you change the
		1066	descriptor even if the file descriptor number itself did not change.
		1067
		1068	This is how one would do it normally anyway, the important point is that
		1069	the libev application should not optimise around libev but should leave
		1070	optimisations to libev.
		1071
		1072	=head3 The special problem of dup'ed file descriptors
		1073
		1074	Some backends (e.g. epoll), cannot register events for file descriptors,
		1075	but only events for the underlying file descriptions. That means when you
		1076	have C<dup ()>'ed file descriptors or weirder constellations, and register
		1077	events for them, only one file descriptor might actually receive events.
		1078
		1079	There is no workaround possible except not registering events
		1080	for potentially C<dup ()>'ed file descriptors, or to resort to
		1081	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
		1082
		1083	=head3 The special problem of fork
		1084
		1085	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit
		1086	useless behaviour. Libev fully supports fork, but needs to be told about
		1087	it in the child.
		1088
		1089	To support fork in your programs, you either have to call
		1090	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,
		1091	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or
		1092	C<EVBACKEND_POLL>.
		1093
		1094	=head3 The special problem of SIGPIPE
		1095
		1096	While not really specific to libev, it is easy to forget about SIGPIPE:
		1097	when reading from a pipe whose other end has been closed, your program
		1098	gets send a SIGPIPE, which, by default, aborts your program. For most
		1099	programs this is sensible behaviour, for daemons, this is usually
		1100	undesirable.
		1101
		1102	So when you encounter spurious, unexplained daemon exits, make sure you
		1103	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
		1104	somewhere, as that would have given you a big clue).
		1105
		1106
		1107	=head3 Watcher-Specific Functions
834		1108
835	=over 4	1109	=over 4
836		1110
837	=item ev_io_init (ev_io *, callback, int fd, int events)	1111	=item ev_io_init (ev_io *, callback, int fd, int events)
838		1112
…		…
849	=item int events [read-only]	1123	=item int events [read-only]
850		1124
851	The events being watched.	1125	The events being watched.
852		1126
853	=back	1127	=back
		1128
		1129	=head3 Examples
854		1130
855	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well	1131	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well
856	readable, but only once. Since it is likely line-buffered, you could	1132	readable, but only once. Since it is likely line-buffered, you could
857	attempt to read a whole line in the callback.	1133	attempt to read a whole line in the callback.
858		1134
…		…
892		1168
893	The callback is guarenteed to be invoked only when its timeout has passed,	1169	The callback is guarenteed to be invoked only when its timeout has passed,
894	but if multiple timers become ready during the same loop iteration then	1170	but if multiple timers become ready during the same loop iteration then
895	order of execution is undefined.	1171	order of execution is undefined.
896		1172
		1173	=head3 Watcher-Specific Functions and Data Members
		1174
897	=over 4	1175	=over 4
898		1176
899	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	1177	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
900		1178
901	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)	1179	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)
…		…
909	configure a timer to trigger every 10 seconds, then it will trigger at	1187	configure a timer to trigger every 10 seconds, then it will trigger at
910	exactly 10 second intervals. If, however, your program cannot keep up with	1188	exactly 10 second intervals. If, however, your program cannot keep up with
911	the timer (because it takes longer than those 10 seconds to do stuff) the	1189	the timer (because it takes longer than those 10 seconds to do stuff) the
912	timer will not fire more than once per event loop iteration.	1190	timer will not fire more than once per event loop iteration.
913		1191
914	=item ev_timer_again (loop)	1192	=item ev_timer_again (loop, ev_timer *)
915		1193
916	This will act as if the timer timed out and restart it again if it is	1194	This will act as if the timer timed out and restart it again if it is
917	repeating. The exact semantics are:	1195	repeating. The exact semantics are:
918		1196
		1197	If the timer is pending, its pending status is cleared.
		1198
919	If the timer is started but nonrepeating, stop it.	1199	If the timer is started but nonrepeating, stop it (as if it timed out).
920		1200
921	If the timer is repeating, either start it if necessary (with the repeat	1201	If the timer is repeating, either start it if necessary (with the
922	value), or reset the running timer to the repeat value.	1202	C<repeat> value), or reset the running timer to the C<repeat> value.
923		1203
924	This sounds a bit complicated, but here is a useful and typical	1204	This sounds a bit complicated, but here is a useful and typical
925	example: Imagine you have a tcp connection and you want a so-called	1205	example: Imagine you have a tcp connection and you want a so-called idle
926	idle timeout, that is, you want to be called when there have been,	1206	timeout, that is, you want to be called when there have been, say, 60
927	say, 60 seconds of inactivity on the socket. The easiest way to do	1207	seconds of inactivity on the socket. The easiest way to do this is to
928	this is to configure an C<ev_timer> with C<after>=C<repeat>=C<60> and calling	1208	configure an C<ev_timer> with a C<repeat> value of C<60> and then call
929	C<ev_timer_again> each time you successfully read or write some data. If	1209	C<ev_timer_again> each time you successfully read or write some data. If
930	you go into an idle state where you do not expect data to travel on the	1210	you go into an idle state where you do not expect data to travel on the
931	socket, you can stop the timer, and again will automatically restart it if	1211	socket, you can C<ev_timer_stop> the timer, and C<ev_timer_again> will
932	need be.	1212	automatically restart it if need be.
933		1213
934	You can also ignore the C<after> value and C<ev_timer_start> altogether	1214	That means you can ignore the C<after> value and C<ev_timer_start>
935	and only ever use the C<repeat> value:	1215	altogether and only ever use the C<repeat> value and C<ev_timer_again>:
936		1216
937	ev_timer_init (timer, callback, 0., 5.);	1217	ev_timer_init (timer, callback, 0., 5.);
938	ev_timer_again (loop, timer);	1218	ev_timer_again (loop, timer);
939	...	1219	...
940	timer->again = 17.;	1220	timer->again = 17.;
941	ev_timer_again (loop, timer);	1221	ev_timer_again (loop, timer);
942	...	1222	...
943	timer->again = 10.;	1223	timer->again = 10.;
944	ev_timer_again (loop, timer);	1224	ev_timer_again (loop, timer);
945		1225
946	This is more efficient then stopping/starting the timer eahc time you want	1226	This is more slightly efficient then stopping/starting the timer each time
947	to modify its timeout value.	1227	you want to modify its timeout value.
948		1228
949	=item ev_tstamp repeat [read-write]	1229	=item ev_tstamp repeat [read-write]
950		1230
951	The current C<repeat> value. Will be used each time the watcher times out	1231	The current C<repeat> value. Will be used each time the watcher times out
952	or C<ev_timer_again> is called and determines the next timeout (if any),	1232	or C<ev_timer_again> is called and determines the next timeout (if any),
953	which is also when any modifications are taken into account.	1233	which is also when any modifications are taken into account.
954		1234
955	=back	1235	=back
		1236
		1237	=head3 Examples
956		1238
957	Example: Create a timer that fires after 60 seconds.	1239	Example: Create a timer that fires after 60 seconds.
958		1240
959	static void	1241	static void
960	one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)	1242	one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)
…		…
994	but on wallclock time (absolute time). You can tell a periodic watcher	1276	but on wallclock time (absolute time). You can tell a periodic watcher
995	to trigger "at" some specific point in time. For example, if you tell a	1277	to trigger "at" some specific point in time. For example, if you tell a
996	periodic watcher to trigger in 10 seconds (by specifiying e.g. C<ev_now ()	1278	periodic watcher to trigger in 10 seconds (by specifiying e.g. C<ev_now ()
997	+ 10.>) and then reset your system clock to the last year, then it will	1279	+ 10.>) and then reset your system clock to the last year, then it will
998	take a year to trigger the event (unlike an C<ev_timer>, which would trigger	1280	take a year to trigger the event (unlike an C<ev_timer>, which would trigger
999	roughly 10 seconds later and of course not if you reset your system time	1281	roughly 10 seconds later).
1000	again).
1001		1282
1002	They can also be used to implement vastly more complex timers, such as	1283	They can also be used to implement vastly more complex timers, such as
1003	triggering an event on eahc midnight, local time.	1284	triggering an event on each midnight, local time or other, complicated,
		1285	rules.
1004		1286
1005	As with timers, the callback is guarenteed to be invoked only when the	1287	As with timers, the callback is guarenteed to be invoked only when the
1006	time (C<at>) has been passed, but if multiple periodic timers become ready	1288	time (C<at>) has been passed, but if multiple periodic timers become ready
1007	during the same loop iteration then order of execution is undefined.	1289	during the same loop iteration then order of execution is undefined.
1008		1290
		1291	=head3 Watcher-Specific Functions and Data Members
		1292
1009	=over 4	1293	=over 4
1010		1294
1011	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)	1295	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)
1012		1296
1013	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)	1297	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)
…		…
1015	Lots of arguments, lets sort it out... There are basically three modes of	1299	Lots of arguments, lets sort it out... There are basically three modes of
1016	operation, and we will explain them from simplest to complex:	1300	operation, and we will explain them from simplest to complex:
1017		1301
1018	=over 4	1302	=over 4
1019		1303
1020	=item * absolute timer (interval = reschedule_cb = 0)	1304	=item * absolute timer (at = time, interval = reschedule_cb = 0)
1021		1305
1022	In this configuration the watcher triggers an event at the wallclock time	1306	In this configuration the watcher triggers an event at the wallclock time
1023	C<at> and doesn't repeat. It will not adjust when a time jump occurs,	1307	C<at> and doesn't repeat. It will not adjust when a time jump occurs,
1024	that is, if it is to be run at January 1st 2011 then it will run when the	1308	that is, if it is to be run at January 1st 2011 then it will run when the
1025	system time reaches or surpasses this time.	1309	system time reaches or surpasses this time.
1026		1310
1027	=item * non-repeating interval timer (interval > 0, reschedule_cb = 0)	1311	=item * repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)
1028		1312
1029	In this mode the watcher will always be scheduled to time out at the next	1313	In this mode the watcher will always be scheduled to time out at the next
1030	C<at + N * interval> time (for some integer N) and then repeat, regardless	1314	C<at + N * interval> time (for some integer N, which can also be negative)
1031	of any time jumps.	1315	and then repeat, regardless of any time jumps.
1032		1316
1033	This can be used to create timers that do not drift with respect to system	1317	This can be used to create timers that do not drift with respect to system
1034	time:	1318	time:
1035		1319
1036	ev_periodic_set (&periodic, 0., 3600., 0);	1320	ev_periodic_set (&periodic, 0., 3600., 0);
…		…
1042		1326
1043	Another way to think about it (for the mathematically inclined) is that	1327	Another way to think about it (for the mathematically inclined) is that
1044	C<ev_periodic> will try to run the callback in this mode at the next possible	1328	C<ev_periodic> will try to run the callback in this mode at the next possible
1045	time where C<time = at (mod interval)>, regardless of any time jumps.	1329	time where C<time = at (mod interval)>, regardless of any time jumps.
1046		1330
		1331	For numerical stability it is preferable that the C<at> value is near
		1332	C<ev_now ()> (the current time), but there is no range requirement for
		1333	this value.
		1334
1047	=item * manual reschedule mode (reschedule_cb = callback)	1335	=item * manual reschedule mode (at and interval ignored, reschedule_cb = callback)
1048		1336
1049	In this mode the values for C<interval> and C<at> are both being	1337	In this mode the values for C<interval> and C<at> are both being
1050	ignored. Instead, each time the periodic watcher gets scheduled, the	1338	ignored. Instead, each time the periodic watcher gets scheduled, the
1051	reschedule callback will be called with the watcher as first, and the	1339	reschedule callback will be called with the watcher as first, and the
1052	current time as second argument.	1340	current time as second argument.
1053		1341
1054	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,	1342	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,
1055	ever, or make any event loop modifications>. If you need to stop it,	1343	ever, or make any event loop modifications>. If you need to stop it,
1056	return C<now + 1e30> (or so, fudge fudge) and stop it afterwards (e.g. by	1344	return C<now + 1e30> (or so, fudge fudge) and stop it afterwards (e.g. by
1057	starting a prepare watcher).	1345	starting an C<ev_prepare> watcher, which is legal).
1058		1346
1059	Its prototype is C<ev_tstamp (*reschedule_cb)(struct ev_periodic *w,	1347	Its prototype is C<ev_tstamp (*reschedule_cb)(struct ev_periodic *w,
1060	ev_tstamp now)>, e.g.:	1348	ev_tstamp now)>, e.g.:
1061		1349
1062	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)	1350	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)
…		…
1085	Simply stops and restarts the periodic watcher again. This is only useful	1373	Simply stops and restarts the periodic watcher again. This is only useful
1086	when you changed some parameters or the reschedule callback would return	1374	when you changed some parameters or the reschedule callback would return
1087	a different time than the last time it was called (e.g. in a crond like	1375	a different time than the last time it was called (e.g. in a crond like
1088	program when the crontabs have changed).	1376	program when the crontabs have changed).
1089		1377
		1378	=item ev_tstamp ev_periodic_at (ev_periodic *)
		1379
		1380	When active, returns the absolute time that the watcher is supposed to
		1381	trigger next.
		1382
		1383	=item ev_tstamp offset [read-write]
		1384
		1385	When repeating, this contains the offset value, otherwise this is the
		1386	absolute point in time (the C<at> value passed to C<ev_periodic_set>).
		1387
		1388	Can be modified any time, but changes only take effect when the periodic
		1389	timer fires or C<ev_periodic_again> is being called.
		1390
1090	=item ev_tstamp interval [read-write]	1391	=item ev_tstamp interval [read-write]
1091		1392
1092	The current interval value. Can be modified any time, but changes only	1393	The current interval value. Can be modified any time, but changes only
1093	take effect when the periodic timer fires or C<ev_periodic_again> is being	1394	take effect when the periodic timer fires or C<ev_periodic_again> is being
1094	called.	1395	called.
…		…
1098	The current reschedule callback, or C<0>, if this functionality is	1399	The current reschedule callback, or C<0>, if this functionality is
1099	switched off. Can be changed any time, but changes only take effect when	1400	switched off. Can be changed any time, but changes only take effect when
1100	the periodic timer fires or C<ev_periodic_again> is being called.	1401	the periodic timer fires or C<ev_periodic_again> is being called.
1101		1402
1102	=back	1403	=back
		1404
		1405	=head3 Examples
1103		1406
1104	Example: Call a callback every hour, or, more precisely, whenever the	1407	Example: Call a callback every hour, or, more precisely, whenever the
1105	system clock is divisible by 3600. The callback invocation times have	1408	system clock is divisible by 3600. The callback invocation times have
1106	potentially a lot of jittering, but good long-term stability.	1409	potentially a lot of jittering, but good long-term stability.
1107		1410
…		…
1147	with the kernel (thus it coexists with your own signal handlers as long	1450	with the kernel (thus it coexists with your own signal handlers as long
1148	as you don't register any with libev). Similarly, when the last signal	1451	as you don't register any with libev). Similarly, when the last signal
1149	watcher for a signal is stopped libev will reset the signal handler to	1452	watcher for a signal is stopped libev will reset the signal handler to
1150	SIG_DFL (regardless of what it was set to before).	1453	SIG_DFL (regardless of what it was set to before).
1151		1454
		1455	If possible and supported, libev will install its handlers with
		1456	C<SA_RESTART> behaviour enabled, so syscalls should not be unduly
		1457	interrupted. If you have a problem with syscalls getting interrupted by
		1458	signals you can block all signals in an C<ev_check> watcher and unblock
		1459	them in an C<ev_prepare> watcher.
		1460
		1461	=head3 Watcher-Specific Functions and Data Members
		1462
1152	=over 4	1463	=over 4
1153		1464
1154	=item ev_signal_init (ev_signal *, callback, int signum)	1465	=item ev_signal_init (ev_signal *, callback, int signum)
1155		1466
1156	=item ev_signal_set (ev_signal *, int signum)	1467	=item ev_signal_set (ev_signal *, int signum)
…		…
1162		1473
1163	The signal the watcher watches out for.	1474	The signal the watcher watches out for.
1164		1475
1165	=back	1476	=back
1166		1477
		1478	=head3 Examples
		1479
		1480	Example: Try to exit cleanly on SIGINT and SIGTERM.
		1481
		1482	static void
		1483	sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)
		1484	{
		1485	ev_unloop (loop, EVUNLOOP_ALL);
		1486	}
		1487
		1488	struct ev_signal signal_watcher;
		1489	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
		1490	ev_signal_start (loop, &sigint_cb);
		1491
1167		1492
1168	=head2 C<ev_child> - watch out for process status changes	1493	=head2 C<ev_child> - watch out for process status changes
1169		1494
1170	Child watchers trigger when your process receives a SIGCHLD in response to	1495	Child watchers trigger when your process receives a SIGCHLD in response to
1171	some child status changes (most typically when a child of yours dies).	1496	some child status changes (most typically when a child of yours dies). It
		1497	is permissible to install a child watcher I<after> the child has been
		1498	forked (which implies it might have already exited), as long as the event
		1499	loop isn't entered (or is continued from a watcher).
		1500
		1501	Only the default event loop is capable of handling signals, and therefore
		1502	you can only rgeister child watchers in the default event loop.
		1503
		1504	=head3 Process Interaction
		1505
		1506	Libev grabs C<SIGCHLD> as soon as the default event loop is
		1507	initialised. This is necessary to guarantee proper behaviour even if
		1508	the first child watcher is started after the child exits. The occurance
		1509	of C<SIGCHLD> is recorded asynchronously, but child reaping is done
		1510	synchronously as part of the event loop processing. Libev always reaps all
		1511	children, even ones not watched.
		1512
		1513	=head3 Overriding the Built-In Processing
		1514
		1515	Libev offers no special support for overriding the built-in child
		1516	processing, but if your application collides with libev's default child
		1517	handler, you can override it easily by installing your own handler for
		1518	C<SIGCHLD> after initialising the default loop, and making sure the
		1519	default loop never gets destroyed. You are encouraged, however, to use an
		1520	event-based approach to child reaping and thus use libev's support for
		1521	that, so other libev users can use C<ev_child> watchers freely.
		1522
		1523	=head3 Watcher-Specific Functions and Data Members
1172		1524
1173	=over 4	1525	=over 4
1174		1526
1175	=item ev_child_init (ev_child *, callback, int pid)	1527	=item ev_child_init (ev_child *, callback, int pid, int trace)
1176		1528
1177	=item ev_child_set (ev_child *, int pid)	1529	=item ev_child_set (ev_child *, int pid, int trace)
1178		1530
1179	Configures the watcher to wait for status changes of process C<pid> (or	1531	Configures the watcher to wait for status changes of process C<pid> (or
1180	I<any> process if C<pid> is specified as C<0>). The callback can look	1532	I<any> process if C<pid> is specified as C<0>). The callback can look
1181	at the C<rstatus> member of the C<ev_child> watcher structure to see	1533	at the C<rstatus> member of the C<ev_child> watcher structure to see
1182	the status word (use the macros from C<sys/wait.h> and see your systems	1534	the status word (use the macros from C<sys/wait.h> and see your systems
1183	C<waitpid> documentation). The C<rpid> member contains the pid of the	1535	C<waitpid> documentation). The C<rpid> member contains the pid of the
1184	process causing the status change.	1536	process causing the status change. C<trace> must be either C<0> (only
		1537	activate the watcher when the process terminates) or C<1> (additionally
		1538	activate the watcher when the process is stopped or continued).
1185		1539
1186	=item int pid [read-only]	1540	=item int pid [read-only]
1187		1541
1188	The process id this watcher watches out for, or C<0>, meaning any process id.	1542	The process id this watcher watches out for, or C<0>, meaning any process id.
1189		1543
…		…
1196	The process exit/trace status caused by C<rpid> (see your systems	1550	The process exit/trace status caused by C<rpid> (see your systems
1197	C<waitpid> and C<sys/wait.h> documentation for details).	1551	C<waitpid> and C<sys/wait.h> documentation for details).
1198		1552
1199	=back	1553	=back
1200		1554
1201	Example: Try to exit cleanly on SIGINT and SIGTERM.	1555	=head3 Examples
		1556
		1557	Example: C<fork()> a new process and install a child handler to wait for
		1558	its completion.
		1559
		1560	ev_child cw;
1202		1561
1203	static void	1562	static void
1204	sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)	1563	child_cb (EV_P_ struct ev_child *w, int revents)
1205	{	1564	{
1206	ev_unloop (loop, EVUNLOOP_ALL);	1565	ev_child_stop (EV_A_ w);
		1566	printf ("process %d exited with status %x\n", w->rpid, w->rstatus);
1207	}	1567	}
1208		1568
1209	struct ev_signal signal_watcher;	1569	pid_t pid = fork ();
1210	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	1570
1211	ev_signal_start (loop, &sigint_cb);	1571	if (pid < 0)
		1572	// error
		1573	else if (pid == 0)
		1574	{
		1575	// the forked child executes here
		1576	exit (1);
		1577	}
		1578	else
		1579	{
		1580	ev_child_init (&cw, child_cb, pid, 0);
		1581	ev_child_start (EV_DEFAULT_ &cw);
		1582	}
1212		1583
1213		1584
1214	=head2 C<ev_stat> - did the file attributes just change?	1585	=head2 C<ev_stat> - did the file attributes just change?
1215		1586
1216	This watches a filesystem path for attribute changes. That is, it calls	1587	This watches a filesystem path for attribute changes. That is, it calls
…		…
1220	The path does not need to exist: changing from "path exists" to "path does	1591	The path does not need to exist: changing from "path exists" to "path does
1221	not exist" is a status change like any other. The condition "path does	1592	not exist" is a status change like any other. The condition "path does
1222	not exist" is signified by the C<st_nlink> field being zero (which is	1593	not exist" is signified by the C<st_nlink> field being zero (which is
1223	otherwise always forced to be at least one) and all the other fields of	1594	otherwise always forced to be at least one) and all the other fields of
1224	the stat buffer having unspecified contents.	1595	the stat buffer having unspecified contents.
		1596
		1597	The path I<should> be absolute and I<must not> end in a slash. If it is
		1598	relative and your working directory changes, the behaviour is undefined.
1225		1599
1226	Since there is no standard to do this, the portable implementation simply	1600	Since there is no standard to do this, the portable implementation simply
1227	calls C<stat (2)> regularly on the path to see if it changed somehow. You	1601	calls C<stat (2)> regularly on the path to see if it changed somehow. You
1228	can specify a recommended polling interval for this case. If you specify	1602	can specify a recommended polling interval for this case. If you specify
1229	a polling interval of C<0> (highly recommended!) then a I<suitable,	1603	a polling interval of C<0> (highly recommended!) then a I<suitable,
…		…
1236	as even with OS-supported change notifications, this can be	1610	as even with OS-supported change notifications, this can be
1237	resource-intensive.	1611	resource-intensive.
1238		1612
1239	At the time of this writing, only the Linux inotify interface is	1613	At the time of this writing, only the Linux inotify interface is
1240	implemented (implementing kqueue support is left as an exercise for the	1614	implemented (implementing kqueue support is left as an exercise for the
		1615	reader, note, however, that the author sees no way of implementing ev_stat
1241	reader). Inotify will be used to give hints only and should not change the	1616	semantics with kqueue). Inotify will be used to give hints only and should
1242	semantics of C<ev_stat> watchers, which means that libev sometimes needs	1617	not change the semantics of C<ev_stat> watchers, which means that libev
1243	to fall back to regular polling again even with inotify, but changes are	1618	sometimes needs to fall back to regular polling again even with inotify,
1244	usually detected immediately, and if the file exists there will be no	1619	but changes are usually detected immediately, and if the file exists there
1245	polling.	1620	will be no polling.
		1621
		1622	=head3 ABI Issues (Largefile Support)
		1623
		1624	Libev by default (unless the user overrides this) uses the default
		1625	compilation environment, which means that on systems with optionally
		1626	disabled large file support, you get the 32 bit version of the stat
		1627	structure. When using the library from programs that change the ABI to
		1628	use 64 bit file offsets the programs will fail. In that case you have to
		1629	compile libev with the same flags to get binary compatibility. This is
		1630	obviously the case with any flags that change the ABI, but the problem is
		1631	most noticably with ev_stat and largefile support.
		1632
		1633	=head3 Inotify
		1634
		1635	When C<inotify (7)> support has been compiled into libev (generally only
		1636	available on Linux) and present at runtime, it will be used to speed up
		1637	change detection where possible. The inotify descriptor will be created lazily
		1638	when the first C<ev_stat> watcher is being started.
		1639
		1640	Inotify presence does not change the semantics of C<ev_stat> watchers
		1641	except that changes might be detected earlier, and in some cases, to avoid
		1642	making regular C<stat> calls. Even in the presence of inotify support
		1643	there are many cases where libev has to resort to regular C<stat> polling.
		1644
		1645	(There is no support for kqueue, as apparently it cannot be used to
		1646	implement this functionality, due to the requirement of having a file
		1647	descriptor open on the object at all times).
		1648
		1649	=head3 The special problem of stat time resolution
		1650
		1651	The C<stat ()> syscall only supports full-second resolution portably, and
		1652	even on systems where the resolution is higher, many filesystems still
		1653	only support whole seconds.
		1654
		1655	That means that, if the time is the only thing that changes, you can
		1656	easily miss updates: on the first update, C<ev_stat> detects a change and
		1657	calls your callback, which does something. When there is another update
		1658	within the same second, C<ev_stat> will be unable to detect it as the stat
		1659	data does not change.
		1660
		1661	The solution to this is to delay acting on a change for slightly more
		1662	than a second (or till slightly after the next full second boundary), using
		1663	a roughly one-second-delay C<ev_timer> (e.g. C<ev_timer_set (w, 0., 1.02);
		1664	ev_timer_again (loop, w)>).
		1665
		1666	The C<.02> offset is added to work around small timing inconsistencies
		1667	of some operating systems (where the second counter of the current time
		1668	might be be delayed. One such system is the Linux kernel, where a call to
		1669	C<gettimeofday> might return a timestamp with a full second later than
		1670	a subsequent C<time> call - if the equivalent of C<time ()> is used to
		1671	update file times then there will be a small window where the kernel uses
		1672	the previous second to update file times but libev might already execute
		1673	the timer callback).
		1674
		1675	=head3 Watcher-Specific Functions and Data Members
1246		1676
1247	=over 4	1677	=over 4
1248		1678
1249	=item ev_stat_init (ev_stat *, callback, const char *path, ev_tstamp interval)	1679	=item ev_stat_init (ev_stat *, callback, const char *path, ev_tstamp interval)
1250		1680
…		…
1254	C<path>. The C<interval> is a hint on how quickly a change is expected to	1684	C<path>. The C<interval> is a hint on how quickly a change is expected to
1255	be detected and should normally be specified as C<0> to let libev choose	1685	be detected and should normally be specified as C<0> to let libev choose
1256	a suitable value. The memory pointed to by C<path> must point to the same	1686	a suitable value. The memory pointed to by C<path> must point to the same
1257	path for as long as the watcher is active.	1687	path for as long as the watcher is active.
1258		1688
1259	The callback will be receive C<EV_STAT> when a change was detected,	1689	The callback will receive C<EV_STAT> when a change was detected, relative
1260	relative to the attributes at the time the watcher was started (or the	1690	to the attributes at the time the watcher was started (or the last change
1261	last change was detected).	1691	was detected).
1262		1692
1263	=item ev_stat_stat (ev_stat *)	1693	=item ev_stat_stat (loop, ev_stat *)
1264		1694
1265	Updates the stat buffer immediately with new values. If you change the	1695	Updates the stat buffer immediately with new values. If you change the
1266	watched path in your callback, you could call this fucntion to avoid	1696	watched path in your callback, you could call this function to avoid
1267	detecting this change (while introducing a race condition). Can also be	1697	detecting this change (while introducing a race condition if you are not
1268	useful simply to find out the new values.	1698	the only one changing the path). Can also be useful simply to find out the
		1699	new values.
1269		1700
1270	=item ev_statdata attr [read-only]	1701	=item ev_statdata attr [read-only]
1271		1702
1272	The most-recently detected attributes of the file. Although the type is of	1703	The most-recently detected attributes of the file. Although the type is
1273	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types	1704	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types
1274	suitable for your system. If the C<st_nlink> member is C<0>, then there	1705	suitable for your system, but you can only rely on the POSIX-standardised
		1706	members to be present. If the C<st_nlink> member is C<0>, then there was
1275	was some error while C<stat>ing the file.	1707	some error while C<stat>ing the file.
1276		1708
1277	=item ev_statdata prev [read-only]	1709	=item ev_statdata prev [read-only]
1278		1710
1279	The previous attributes of the file. The callback gets invoked whenever	1711	The previous attributes of the file. The callback gets invoked whenever
1280	C<prev> != C<attr>.	1712	C<prev> != C<attr>, or, more precisely, one or more of these members
		1713	differ: C<st_dev>, C<st_ino>, C<st_mode>, C<st_nlink>, C<st_uid>,
		1714	C<st_gid>, C<st_rdev>, C<st_size>, C<st_atime>, C<st_mtime>, C<st_ctime>.
1281		1715
1282	=item ev_tstamp interval [read-only]	1716	=item ev_tstamp interval [read-only]
1283		1717
1284	The specified interval.	1718	The specified interval.
1285		1719
1286	=item const char *path [read-only]	1720	=item const char *path [read-only]
1287		1721
1288	The filesystem path that is being watched.	1722	The filesystem path that is being watched.
1289		1723
1290	=back	1724	=back
		1725
		1726	=head3 Examples
1291		1727
1292	Example: Watch C</etc/passwd> for attribute changes.	1728	Example: Watch C</etc/passwd> for attribute changes.
1293		1729
1294	static void	1730	static void
1295	passwd_cb (struct ev_loop *loop, ev_stat *w, int revents)	1731	passwd_cb (struct ev_loop *loop, ev_stat *w, int revents)
…		…
1308	}	1744	}
1309		1745
1310	...	1746	...
1311	ev_stat passwd;	1747	ev_stat passwd;
1312		1748
1313	ev_stat_init (&passwd, passwd_cb, "/etc/passwd");	1749	ev_stat_init (&passwd, passwd_cb, "/etc/passwd", 0.);
1314	ev_stat_start (loop, &passwd);	1750	ev_stat_start (loop, &passwd);
1315		1751
		1752	Example: Like above, but additionally use a one-second delay so we do not
		1753	miss updates (however, frequent updates will delay processing, too, so
		1754	one might do the work both on C<ev_stat> callback invocation I<and> on
		1755	C<ev_timer> callback invocation).
		1756
		1757	static ev_stat passwd;
		1758	static ev_timer timer;
		1759
		1760	static void
		1761	timer_cb (EV_P_ ev_timer *w, int revents)
		1762	{
		1763	ev_timer_stop (EV_A_ w);
		1764
		1765	/* now it's one second after the most recent passwd change */
		1766	}
		1767
		1768	static void
		1769	stat_cb (EV_P_ ev_stat *w, int revents)
		1770	{
		1771	/* reset the one-second timer */
		1772	ev_timer_again (EV_A_ &timer);
		1773	}
		1774
		1775	...
		1776	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);
		1777	ev_stat_start (loop, &passwd);
		1778	ev_timer_init (&timer, timer_cb, 0., 1.02);
		1779
1316		1780
1317	=head2 C<ev_idle> - when you've got nothing better to do...	1781	=head2 C<ev_idle> - when you've got nothing better to do...
1318		1782
1319	Idle watchers trigger events when there are no other events are pending	1783	Idle watchers trigger events when no other events of the same or higher
1320	(prepare, check and other idle watchers do not count). That is, as long	1784	priority are pending (prepare, check and other idle watchers do not
1321	as your process is busy handling sockets or timeouts (or even signals,	1785	count).
1322	imagine) it will not be triggered. But when your process is idle all idle	1786
1323	watchers are being called again and again, once per event loop iteration -	1787	That is, as long as your process is busy handling sockets or timeouts
		1788	(or even signals, imagine) of the same or higher priority it will not be
		1789	triggered. But when your process is idle (or only lower-priority watchers
		1790	are pending), the idle watchers are being called once per event loop
1324	until stopped, that is, or your process receives more events and becomes	1791	iteration - until stopped, that is, or your process receives more events
1325	busy.	1792	and becomes busy again with higher priority stuff.
1326		1793
1327	The most noteworthy effect is that as long as any idle watchers are	1794	The most noteworthy effect is that as long as any idle watchers are
1328	active, the process will not block when waiting for new events.	1795	active, the process will not block when waiting for new events.
1329		1796
1330	Apart from keeping your process non-blocking (which is a useful	1797	Apart from keeping your process non-blocking (which is a useful
1331	effect on its own sometimes), idle watchers are a good place to do	1798	effect on its own sometimes), idle watchers are a good place to do
1332	"pseudo-background processing", or delay processing stuff to after the	1799	"pseudo-background processing", or delay processing stuff to after the
1333	event loop has handled all outstanding events.	1800	event loop has handled all outstanding events.
1334		1801
		1802	=head3 Watcher-Specific Functions and Data Members
		1803
1335	=over 4	1804	=over 4
1336		1805
1337	=item ev_idle_init (ev_signal *, callback)	1806	=item ev_idle_init (ev_signal *, callback)
1338		1807
1339	Initialises and configures the idle watcher - it has no parameters of any	1808	Initialises and configures the idle watcher - it has no parameters of any
1340	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,	1809	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,
1341	believe me.	1810	believe me.
1342		1811
1343	=back	1812	=back
		1813
		1814	=head3 Examples
1344		1815
1345	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the	1816	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the
1346	callback, free it. Also, use no error checking, as usual.	1817	callback, free it. Also, use no error checking, as usual.
1347		1818
1348	static void	1819	static void
1349	idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)	1820	idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)
1350	{	1821	{
1351	free (w);	1822	free (w);
1352	// now do something you wanted to do when the program has	1823	// now do something you wanted to do when the program has
1353	// no longer asnything immediate to do.	1824	// no longer anything immediate to do.
1354	}	1825	}
1355		1826
1356	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));	1827	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));
1357	ev_idle_init (idle_watcher, idle_cb);	1828	ev_idle_init (idle_watcher, idle_cb);
1358	ev_idle_start (loop, idle_cb);	1829	ev_idle_start (loop, idle_cb);
…		…
1396	with priority higher than or equal to the event loop and one coroutine	1867	with priority higher than or equal to the event loop and one coroutine
1397	of lower priority, but only once, using idle watchers to keep the event	1868	of lower priority, but only once, using idle watchers to keep the event
1398	loop from blocking if lower-priority coroutines are active, thus mapping	1869	loop from blocking if lower-priority coroutines are active, thus mapping
1399	low-priority coroutines to idle/background tasks).	1870	low-priority coroutines to idle/background tasks).
1400		1871
		1872	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)
		1873	priority, to ensure that they are being run before any other watchers
		1874	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,
		1875	too) should not activate ("feed") events into libev. While libev fully
		1876	supports this, they might get executed before other C<ev_check> watchers
		1877	did their job. As C<ev_check> watchers are often used to embed other
		1878	(non-libev) event loops those other event loops might be in an unusable
		1879	state until their C<ev_check> watcher ran (always remind yourself to
		1880	coexist peacefully with others).
		1881
		1882	=head3 Watcher-Specific Functions and Data Members
		1883
1401	=over 4	1884	=over 4
1402		1885
1403	=item ev_prepare_init (ev_prepare *, callback)	1886	=item ev_prepare_init (ev_prepare *, callback)
1404		1887
1405	=item ev_check_init (ev_check *, callback)	1888	=item ev_check_init (ev_check *, callback)
…		…
1408	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>	1891	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>
1409	macros, but using them is utterly, utterly and completely pointless.	1892	macros, but using them is utterly, utterly and completely pointless.
1410		1893
1411	=back	1894	=back
1412		1895
1413	Example: To include a library such as adns, you would add IO watchers	1896	=head3 Examples
1414	and a timeout watcher in a prepare handler, as required by libadns, and	1897
		1898	There are a number of principal ways to embed other event loops or modules
		1899	into libev. Here are some ideas on how to include libadns into libev
		1900	(there is a Perl module named C<EV::ADNS> that does this, which you could
		1901	use as a working example. Another Perl module named C<EV::Glib> embeds a
		1902	Glib main context into libev, and finally, C<Glib::EV> embeds EV into the
		1903	Glib event loop).
		1904
		1905	Method 1: Add IO watchers and a timeout watcher in a prepare handler,
1415	in a check watcher, destroy them and call into libadns. What follows is	1906	and in a check watcher, destroy them and call into libadns. What follows
1416	pseudo-code only of course:	1907	is pseudo-code only of course. This requires you to either use a low
		1908	priority for the check watcher or use C<ev_clear_pending> explicitly, as
		1909	the callbacks for the IO/timeout watchers might not have been called yet.
1417		1910
1418	static ev_io iow [nfd];	1911	static ev_io iow [nfd];
1419	static ev_timer tw;	1912	static ev_timer tw;
1420		1913
1421	static void	1914	static void
1422	io_cb (ev_loop *loop, ev_io *w, int revents)	1915	io_cb (ev_loop *loop, ev_io *w, int revents)
1423	{	1916	{
1424	// set the relevant poll flags
1425	// could also call adns_processreadable etc. here
1426	struct pollfd *fd = (struct pollfd *)w->data;
1427	if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;
1428	if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;
1429	}	1917	}
1430		1918
1431	// create io watchers for each fd and a timer before blocking	1919	// create io watchers for each fd and a timer before blocking
1432	static void	1920	static void
1433	adns_prepare_cb (ev_loop *loop, ev_prepare *w, int revents)	1921	adns_prepare_cb (ev_loop *loop, ev_prepare *w, int revents)
1434	{	1922	{
1435	int timeout = 3600000;truct pollfd fds [nfd];	1923	int timeout = 3600000;
		1924	struct pollfd fds [nfd];
1436	// actual code will need to loop here and realloc etc.	1925	// actual code will need to loop here and realloc etc.
1437	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));	1926	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
1438		1927
1439	/* the callback is illegal, but won't be called as we stop during check */	1928	/* the callback is illegal, but won't be called as we stop during check */
1440	ev_timer_init (&tw, 0, timeout * 1e-3);	1929	ev_timer_init (&tw, 0, timeout * 1e-3);
1441	ev_timer_start (loop, &tw);	1930	ev_timer_start (loop, &tw);
1442		1931
1443	// create on ev_io per pollfd	1932	// create one ev_io per pollfd
1444	for (int i = 0; i < nfd; ++i)	1933	for (int i = 0; i < nfd; ++i)
1445	{	1934	{
1446	ev_io_init (iow + i, io_cb, fds [i].fd,	1935	ev_io_init (iow + i, io_cb, fds [i].fd,
1447	((fds [i].events & POLLIN ? EV_READ : 0)	1936	((fds [i].events & POLLIN ? EV_READ : 0)
1448	| (fds [i].events & POLLOUT ? EV_WRITE : 0)));	1937	| (fds [i].events & POLLOUT ? EV_WRITE : 0)));
1449		1938
1450	fds [i].revents = 0;	1939	fds [i].revents = 0;
1451	iow [i].data = fds + i;
1452	ev_io_start (loop, iow + i);	1940	ev_io_start (loop, iow + i);
1453	}	1941	}
1454	}	1942	}
1455		1943
1456	// stop all watchers after blocking	1944	// stop all watchers after blocking
…		…
1458	adns_check_cb (ev_loop *loop, ev_check *w, int revents)	1946	adns_check_cb (ev_loop *loop, ev_check *w, int revents)
1459	{	1947	{
1460	ev_timer_stop (loop, &tw);	1948	ev_timer_stop (loop, &tw);
1461		1949
1462	for (int i = 0; i < nfd; ++i)	1950	for (int i = 0; i < nfd; ++i)
		1951	{
		1952	// set the relevant poll flags
		1953	// could also call adns_processreadable etc. here
		1954	struct pollfd *fd = fds + i;
		1955	int revents = ev_clear_pending (iow + i);
		1956	if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;
		1957	if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;
		1958
		1959	// now stop the watcher
1463	ev_io_stop (loop, iow + i);	1960	ev_io_stop (loop, iow + i);
		1961	}
1464		1962
1465	adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));	1963	adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));
		1964	}
		1965
		1966	Method 2: This would be just like method 1, but you run C<adns_afterpoll>
		1967	in the prepare watcher and would dispose of the check watcher.
		1968
		1969	Method 3: If the module to be embedded supports explicit event
		1970	notification (adns does), you can also make use of the actual watcher
		1971	callbacks, and only destroy/create the watchers in the prepare watcher.
		1972
		1973	static void
		1974	timer_cb (EV_P_ ev_timer *w, int revents)
		1975	{
		1976	adns_state ads = (adns_state)w->data;
		1977	update_now (EV_A);
		1978
		1979	adns_processtimeouts (ads, &tv_now);
		1980	}
		1981
		1982	static void
		1983	io_cb (EV_P_ ev_io *w, int revents)
		1984	{
		1985	adns_state ads = (adns_state)w->data;
		1986	update_now (EV_A);
		1987
		1988	if (revents & EV_READ ) adns_processreadable (ads, w->fd, &tv_now);
		1989	if (revents & EV_WRITE) adns_processwriteable (ads, w->fd, &tv_now);
		1990	}
		1991
		1992	// do not ever call adns_afterpoll
		1993
		1994	Method 4: Do not use a prepare or check watcher because the module you
		1995	want to embed is too inflexible to support it. Instead, youc na override
		1996	their poll function. The drawback with this solution is that the main
		1997	loop is now no longer controllable by EV. The C<Glib::EV> module does
		1998	this.
		1999
		2000	static gint
		2001	event_poll_func (GPollFD *fds, guint nfds, gint timeout)
		2002	{
		2003	int got_events = 0;
		2004
		2005	for (n = 0; n < nfds; ++n)
		2006	// create/start io watcher that sets the relevant bits in fds[n] and increment got_events
		2007
		2008	if (timeout >= 0)
		2009	// create/start timer
		2010
		2011	// poll
		2012	ev_loop (EV_A_ 0);
		2013
		2014	// stop timer again
		2015	if (timeout >= 0)
		2016	ev_timer_stop (EV_A_ &to);
		2017
		2018	// stop io watchers again - their callbacks should have set
		2019	for (n = 0; n < nfds; ++n)
		2020	ev_io_stop (EV_A_ iow [n]);
		2021
		2022	return got_events;
1466	}	2023	}
1467		2024
1468		2025
1469	=head2 C<ev_embed> - when one backend isn't enough...	2026	=head2 C<ev_embed> - when one backend isn't enough...
1470		2027
…		…
1513	portable one.	2070	portable one.
1514		2071
1515	So when you want to use this feature you will always have to be prepared	2072	So when you want to use this feature you will always have to be prepared
1516	that you cannot get an embeddable loop. The recommended way to get around	2073	that you cannot get an embeddable loop. The recommended way to get around
1517	this is to have a separate variables for your embeddable loop, try to	2074	this is to have a separate variables for your embeddable loop, try to
1518	create it, and if that fails, use the normal loop for everything:	2075	create it, and if that fails, use the normal loop for everything.
		2076
		2077	=head3 Watcher-Specific Functions and Data Members
		2078
		2079	=over 4
		2080
		2081	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
		2082
		2083	=item ev_embed_set (ev_embed *, callback, struct ev_loop *embedded_loop)
		2084
		2085	Configures the watcher to embed the given loop, which must be
		2086	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
		2087	invoked automatically, otherwise it is the responsibility of the callback
		2088	to invoke it (it will continue to be called until the sweep has been done,
		2089	if you do not want thta, you need to temporarily stop the embed watcher).
		2090
		2091	=item ev_embed_sweep (loop, ev_embed *)
		2092
		2093	Make a single, non-blocking sweep over the embedded loop. This works
		2094	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
		2095	apropriate way for embedded loops.
		2096
		2097	=item struct ev_loop *other [read-only]
		2098
		2099	The embedded event loop.
		2100
		2101	=back
		2102
		2103	=head3 Examples
		2104
		2105	Example: Try to get an embeddable event loop and embed it into the default
		2106	event loop. If that is not possible, use the default loop. The default
		2107	loop is stored in C<loop_hi>, while the mebeddable loop is stored in
		2108	C<loop_lo> (which is C<loop_hi> in the acse no embeddable loop can be
		2109	used).
1519		2110
1520	struct ev_loop *loop_hi = ev_default_init (0);	2111	struct ev_loop *loop_hi = ev_default_init (0);
1521	struct ev_loop *loop_lo = 0;	2112	struct ev_loop *loop_lo = 0;
1522	struct ev_embed embed;	2113	struct ev_embed embed;
1523		2114
…		…
1534	ev_embed_start (loop_hi, &embed);	2125	ev_embed_start (loop_hi, &embed);
1535	}	2126	}
1536	else	2127	else
1537	loop_lo = loop_hi;	2128	loop_lo = loop_hi;
1538		2129
1539	=over 4	2130	Example: Check if kqueue is available but not recommended and create
		2131	a kqueue backend for use with sockets (which usually work with any
		2132	kqueue implementation). Store the kqueue/socket-only event loop in
		2133	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
1540		2134
1541	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)	2135	struct ev_loop *loop = ev_default_init (0);
		2136	struct ev_loop *loop_socket = 0;
		2137	struct ev_embed embed;
		2138
		2139	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
		2140	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
		2141	{
		2142	ev_embed_init (&embed, 0, loop_socket);
		2143	ev_embed_start (loop, &embed);
		2144	}
1542		2145
1543	=item ev_embed_set (ev_embed *, callback, struct ev_loop *embedded_loop)	2146	if (!loop_socket)
		2147	loop_socket = loop;
1544		2148
1545	Configures the watcher to embed the given loop, which must be	2149	// now use loop_socket for all sockets, and loop for everything else
1546	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
1547	invoked automatically, otherwise it is the responsibility of the callback
1548	to invoke it (it will continue to be called until the sweep has been done,
1549	if you do not want thta, you need to temporarily stop the embed watcher).
1550
1551	=item ev_embed_sweep (loop, ev_embed *)
1552
1553	Make a single, non-blocking sweep over the embedded loop. This works
1554	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
1555	apropriate way for embedded loops.
1556
1557	=item struct ev_loop *loop [read-only]
1558
1559	The embedded event loop.
1560
1561	=back
1562		2150
1563		2151
1564	=head2 C<ev_fork> - the audacity to resume the event loop after a fork	2152	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
1565		2153
1566	Fork watchers are called when a C<fork ()> was detected (usually because	2154	Fork watchers are called when a C<fork ()> was detected (usually because
…		…
1569	event loop blocks next and before C<ev_check> watchers are being called,	2157	event loop blocks next and before C<ev_check> watchers are being called,
1570	and only in the child after the fork. If whoever good citizen calling	2158	and only in the child after the fork. If whoever good citizen calling
1571	C<ev_default_fork> cheats and calls it in the wrong process, the fork	2159	C<ev_default_fork> cheats and calls it in the wrong process, the fork
1572	handlers will be invoked, too, of course.	2160	handlers will be invoked, too, of course.
1573		2161
		2162	=head3 Watcher-Specific Functions and Data Members
		2163
1574	=over 4	2164	=over 4
1575		2165
1576	=item ev_fork_init (ev_signal *, callback)	2166	=item ev_fork_init (ev_signal *, callback)
1577		2167
1578	Initialises and configures the fork watcher - it has no parameters of any	2168	Initialises and configures the fork watcher - it has no parameters of any
1579	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	2169	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
1580	believe me.	2170	believe me.
		2171
		2172	=back
		2173
		2174
		2175	=head2 C<ev_async> - how to wake up another event loop
		2176
		2177	In general, you cannot use an C<ev_loop> from multiple threads or other
		2178	asynchronous sources such as signal handlers (as opposed to multiple event
		2179	loops - those are of course safe to use in different threads).
		2180
		2181	Sometimes, however, you need to wake up another event loop you do not
		2182	control, for example because it belongs to another thread. This is what
		2183	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you
		2184	can signal it by calling C<ev_async_send>, which is thread- and signal
		2185	safe.
		2186
		2187	This functionality is very similar to C<ev_signal> watchers, as signals,
		2188	too, are asynchronous in nature, and signals, too, will be compressed
		2189	(i.e. the number of callback invocations may be less than the number of
		2190	C<ev_async_sent> calls).
		2191
		2192	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not
		2193	just the default loop.
		2194
		2195	=head3 Queueing
		2196
		2197	C<ev_async> does not support queueing of data in any way. The reason
		2198	is that the author does not know of a simple (or any) algorithm for a
		2199	multiple-writer-single-reader queue that works in all cases and doesn't
		2200	need elaborate support such as pthreads.
		2201
		2202	That means that if you want to queue data, you have to provide your own
		2203	queue. But at least I can tell you would implement locking around your
		2204	queue:
		2205
		2206	=over 4
		2207
		2208	=item queueing from a signal handler context
		2209
		2210	To implement race-free queueing, you simply add to the queue in the signal
		2211	handler but you block the signal handler in the watcher callback. Here is an example that does that for
		2212	some fictitiuous SIGUSR1 handler:
		2213
		2214	static ev_async mysig;
		2215
		2216	static void
		2217	sigusr1_handler (void)
		2218	{
		2219	sometype data;
		2220
		2221	// no locking etc.
		2222	queue_put (data);
		2223	ev_async_send (EV_DEFAULT_ &mysig);
		2224	}
		2225
		2226	static void
		2227	mysig_cb (EV_P_ ev_async *w, int revents)
		2228	{
		2229	sometype data;
		2230	sigset_t block, prev;
		2231
		2232	sigemptyset (&block);
		2233	sigaddset (&block, SIGUSR1);
		2234	sigprocmask (SIG_BLOCK, &block, &prev);
		2235
		2236	while (queue_get (&data))
		2237	process (data);
		2238
		2239	if (sigismember (&prev, SIGUSR1)
		2240	sigprocmask (SIG_UNBLOCK, &block, 0);
		2241	}
		2242
		2243	(Note: pthreads in theory requires you to use C<pthread_setmask>
		2244	instead of C<sigprocmask> when you use threads, but libev doesn't do it
		2245	either...).
		2246
		2247	=item queueing from a thread context
		2248
		2249	The strategy for threads is different, as you cannot (easily) block
		2250	threads but you can easily preempt them, so to queue safely you need to
		2251	employ a traditional mutex lock, such as in this pthread example:
		2252
		2253	static ev_async mysig;
		2254	static pthread_mutex_t mymutex = PTHREAD_MUTEX_INITIALIZER;
		2255
		2256	static void
		2257	otherthread (void)
		2258	{
		2259	// only need to lock the actual queueing operation
		2260	pthread_mutex_lock (&mymutex);
		2261	queue_put (data);
		2262	pthread_mutex_unlock (&mymutex);
		2263
		2264	ev_async_send (EV_DEFAULT_ &mysig);
		2265	}
		2266
		2267	static void
		2268	mysig_cb (EV_P_ ev_async *w, int revents)
		2269	{
		2270	pthread_mutex_lock (&mymutex);
		2271
		2272	while (queue_get (&data))
		2273	process (data);
		2274
		2275	pthread_mutex_unlock (&mymutex);
		2276	}
		2277
		2278	=back
		2279
		2280
		2281	=head3 Watcher-Specific Functions and Data Members
		2282
		2283	=over 4
		2284
		2285	=item ev_async_init (ev_async *, callback)
		2286
		2287	Initialises and configures the async watcher - it has no parameters of any
		2288	kind. There is a C<ev_asynd_set> macro, but using it is utterly pointless,
		2289	believe me.
		2290
		2291	=item ev_async_send (loop, ev_async *)
		2292
		2293	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
		2294	an C<EV_ASYNC> event on the watcher into the event loop. Unlike
		2295	C<ev_feed_event>, this call is safe to do in other threads, signal or
		2296	similar contexts (see the dicusssion of C<EV_ATOMIC_T> in the embedding
		2297	section below on what exactly this means).
		2298
		2299	This call incurs the overhead of a syscall only once per loop iteration,
		2300	so while the overhead might be noticable, it doesn't apply to repeated
		2301	calls to C<ev_async_send>.
		2302
		2303	=item bool = ev_async_pending (ev_async *)
		2304
		2305	Returns a non-zero value when C<ev_async_send> has been called on the
		2306	watcher but the event has not yet been processed (or even noted) by the
		2307	event loop.
		2308
		2309	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When
		2310	the loop iterates next and checks for the watcher to have become active,
		2311	it will reset the flag again. C<ev_async_pending> can be used to very
		2312	quickly check wether invoking the loop might be a good idea.
		2313
		2314	Not that this does I<not> check wether the watcher itself is pending, only
		2315	wether it has been requested to make this watcher pending.
1581		2316
1582	=back	2317	=back
1583		2318
1584		2319
1585	=head1 OTHER FUNCTIONS	2320	=head1 OTHER FUNCTIONS
…		…
1657		2392
1658	=item * Priorities are not currently supported. Initialising priorities	2393	=item * Priorities are not currently supported. Initialising priorities
1659	will fail and all watchers will have the same priority, even though there	2394	will fail and all watchers will have the same priority, even though there
1660	is an ev_pri field.	2395	is an ev_pri field.
1661		2396
		2397	=item * In libevent, the last base created gets the signals, in libev, the
		2398	first base created (== the default loop) gets the signals.
		2399
1662	=item * Other members are not supported.	2400	=item * Other members are not supported.
1663		2401
1664	=item * The libev emulation is I<not> ABI compatible to libevent, you need	2402	=item * The libev emulation is I<not> ABI compatible to libevent, you need
1665	to use the libev header file and library.	2403	to use the libev header file and library.
1666		2404
…		…
1674		2412
1675	To use it,	2413	To use it,
1676		2414
1677	#include <ev++.h>	2415	#include <ev++.h>
1678		2416
1679	(it is not installed by default). This automatically includes F<ev.h>	2417	This automatically includes F<ev.h> and puts all of its definitions (many
1680	and puts all of its definitions (many of them macros) into the global	2418	of them macros) into the global namespace. All C++ specific things are
1681	namespace. All C++ specific things are put into the C<ev> namespace.	2419	put into the C<ev> namespace. It should support all the same embedding
		2420	options as F<ev.h>, most notably C<EV_MULTIPLICITY>.
1682		2421
1683	It should support all the same embedding options as F<ev.h>, most notably	2422	Care has been taken to keep the overhead low. The only data member the C++
1684	C<EV_MULTIPLICITY>.	2423	classes add (compared to plain C-style watchers) is the event loop pointer
		2424	that the watcher is associated with (or no additional members at all if
		2425	you disable C<EV_MULTIPLICITY> when embedding libev).
		2426
		2427	Currently, functions, and static and non-static member functions can be
		2428	used as callbacks. Other types should be easy to add as long as they only
		2429	need one additional pointer for context. If you need support for other
		2430	types of functors please contact the author (preferably after implementing
		2431	it).
1685		2432
1686	Here is a list of things available in the C<ev> namespace:	2433	Here is a list of things available in the C<ev> namespace:
1687		2434
1688	=over 4	2435	=over 4
1689		2436
…		…
1705		2452
1706	All of those classes have these methods:	2453	All of those classes have these methods:
1707		2454
1708	=over 4	2455	=over 4
1709		2456
1710	=item ev::TYPE::TYPE (object *, object::method *)	2457	=item ev::TYPE::TYPE ()
1711		2458
1712	=item ev::TYPE::TYPE (object *, object::method *, struct ev_loop *)	2459	=item ev::TYPE::TYPE (struct ev_loop *)
1713		2460
1714	=item ev::TYPE::~TYPE	2461	=item ev::TYPE::~TYPE
1715		2462
1716	The constructor takes a pointer to an object and a method pointer to	2463	The constructor (optionally) takes an event loop to associate the watcher
1717	the event handler callback to call in this class. The constructor calls	2464	with. If it is omitted, it will use C<EV_DEFAULT>.
1718	C<ev_init> for you, which means you have to call the C<set> method	2465
1719	before starting it. If you do not specify a loop then the constructor	2466	The constructor calls C<ev_init> for you, which means you have to call the
1720	automatically associates the default loop with this watcher.	2467	C<set> method before starting it.
		2468
		2469	It will not set a callback, however: You have to call the templated C<set>
		2470	method to set a callback before you can start the watcher.
		2471
		2472	(The reason why you have to use a method is a limitation in C++ which does
		2473	not allow explicit template arguments for constructors).
1721		2474
1722	The destructor automatically stops the watcher if it is active.	2475	The destructor automatically stops the watcher if it is active.
		2476
		2477	=item w->set<class, &class::method> (object *)
		2478
		2479	This method sets the callback method to call. The method has to have a
		2480	signature of C<void (*)(ev_TYPE &, int)>, it receives the watcher as
		2481	first argument and the C<revents> as second. The object must be given as
		2482	parameter and is stored in the C<data> member of the watcher.
		2483
		2484	This method synthesizes efficient thunking code to call your method from
		2485	the C callback that libev requires. If your compiler can inline your
		2486	callback (i.e. it is visible to it at the place of the C<set> call and
		2487	your compiler is good :), then the method will be fully inlined into the
		2488	thunking function, making it as fast as a direct C callback.
		2489
		2490	Example: simple class declaration and watcher initialisation
		2491
		2492	struct myclass
		2493	{
		2494	void io_cb (ev::io &w, int revents) { }
		2495	}
		2496
		2497	myclass obj;
		2498	ev::io iow;
		2499	iow.set <myclass, &myclass::io_cb> (&obj);
		2500
		2501	=item w->set<function> (void *data = 0)
		2502
		2503	Also sets a callback, but uses a static method or plain function as
		2504	callback. The optional C<data> argument will be stored in the watcher's
		2505	C<data> member and is free for you to use.
		2506
		2507	The prototype of the C<function> must be C<void (*)(ev::TYPE &w, int)>.
		2508
		2509	See the method-C<set> above for more details.
		2510
		2511	Example:
		2512
		2513	static void io_cb (ev::io &w, int revents) { }
		2514	iow.set <io_cb> ();
1723		2515
1724	=item w->set (struct ev_loop *)	2516	=item w->set (struct ev_loop *)
1725		2517
1726	Associates a different C<struct ev_loop> with this watcher. You can only	2518	Associates a different C<struct ev_loop> with this watcher. You can only
1727	do this when the watcher is inactive (and not pending either).	2519	do this when the watcher is inactive (and not pending either).
1728		2520
1729	=item w->set ([args])	2521	=item w->set ([args])
1730		2522
1731	Basically the same as C<ev_TYPE_set>, with the same args. Must be	2523	Basically the same as C<ev_TYPE_set>, with the same args. Must be
1732	called at least once. Unlike the C counterpart, an active watcher gets	2524	called at least once. Unlike the C counterpart, an active watcher gets
1733	automatically stopped and restarted.	2525	automatically stopped and restarted when reconfiguring it with this
		2526	method.
1734		2527
1735	=item w->start ()	2528	=item w->start ()
1736		2529
1737	Starts the watcher. Note that there is no C<loop> argument as the	2530	Starts the watcher. Note that there is no C<loop> argument, as the
1738	constructor already takes the loop.	2531	constructor already stores the event loop.
1739		2532
1740	=item w->stop ()	2533	=item w->stop ()
1741		2534
1742	Stops the watcher if it is active. Again, no C<loop> argument.	2535	Stops the watcher if it is active. Again, no C<loop> argument.
1743		2536
1744	=item w->again () C<ev::timer>, C<ev::periodic> only	2537	=item w->again () (C<ev::timer>, C<ev::periodic> only)
1745		2538
1746	For C<ev::timer> and C<ev::periodic>, this invokes the corresponding	2539	For C<ev::timer> and C<ev::periodic>, this invokes the corresponding
1747	C<ev_TYPE_again> function.	2540	C<ev_TYPE_again> function.
1748		2541
1749	=item w->sweep () C<ev::embed> only	2542	=item w->sweep () (C<ev::embed> only)
1750		2543
1751	Invokes C<ev_embed_sweep>.	2544	Invokes C<ev_embed_sweep>.
1752		2545
1753	=item w->update () C<ev::stat> only	2546	=item w->update () (C<ev::stat> only)
1754		2547
1755	Invokes C<ev_stat_stat>.	2548	Invokes C<ev_stat_stat>.
1756		2549
1757	=back	2550	=back
1758		2551
…		…
1761	Example: Define a class with an IO and idle watcher, start one of them in	2554	Example: Define a class with an IO and idle watcher, start one of them in
1762	the constructor.	2555	the constructor.
1763		2556
1764	class myclass	2557	class myclass
1765	{	2558	{
1766	ev_io io; void io_cb (ev::io &w, int revents);	2559	ev::io io; void io_cb (ev::io &w, int revents);
1767	ev_idle idle void idle_cb (ev::idle &w, int revents);	2560	ev:idle idle void idle_cb (ev::idle &w, int revents);
1768		2561
1769	myclass ();	2562	myclass (int fd)
1770	}
1771
1772	myclass::myclass (int fd)
1773	: io (this, &myclass::io_cb),
1774	idle (this, &myclass::idle_cb)
1775	{	2563	{
		2564	io .set <myclass, &myclass::io_cb > (this);
		2565	idle.set <myclass, &myclass::idle_cb> (this);
		2566
1776	io.start (fd, ev::READ);	2567	io.start (fd, ev::READ);
		2568	}
1777	}	2569	};
		2570
		2571
		2572	=head1 OTHER LANGUAGE BINDINGS
		2573
		2574	Libev does not offer other language bindings itself, but bindings for a
		2575	numbe rof languages exist in the form of third-party packages. If you know
		2576	any interesting language binding in addition to the ones listed here, drop
		2577	me a note.
		2578
		2579	=over 4
		2580
		2581	=item Perl
		2582
		2583	The EV module implements the full libev API and is actually used to test
		2584	libev. EV is developed together with libev. Apart from the EV core module,
		2585	there are additional modules that implement libev-compatible interfaces
		2586	to C<libadns> (C<EV::ADNS>), C<Net::SNMP> (C<Net::SNMP::EV>) and the
		2587	C<libglib> event core (C<Glib::EV> and C<EV::Glib>).
		2588
		2589	It can be found and installed via CPAN, its homepage is found at
		2590	L<http://software.schmorp.de/pkg/EV>.
		2591
		2592	=item Ruby
		2593
		2594	Tony Arcieri has written a ruby extension that offers access to a subset
		2595	of the libev API and adds filehandle abstractions, asynchronous DNS and
		2596	more on top of it. It can be found via gem servers. Its homepage is at
		2597	L<http://rev.rubyforge.org/>.
		2598
		2599	=item D
		2600
		2601	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
		2602	be found at L<http://git.llucax.com.ar/?p=software/ev.d.git;a=summary>.
		2603
		2604	=back
1778		2605
1779		2606
1780	=head1 MACRO MAGIC	2607	=head1 MACRO MAGIC
1781		2608
1782	Libev can be compiled with a variety of options, the most fundemantal is	2609	Libev can be compiled with a variety of options, the most fundamantal
1783	C<EV_MULTIPLICITY>. This option determines wether (most) functions and	2610	of which is C<EV_MULTIPLICITY>. This option determines whether (most)
1784	callbacks have an initial C<struct ev_loop *> argument.	2611	functions and callbacks have an initial C<struct ev_loop *> argument.
1785		2612
1786	To make it easier to write programs that cope with either variant, the	2613	To make it easier to write programs that cope with either variant, the
1787	following macros are defined:	2614	following macros are defined:
1788		2615
1789	=over 4	2616	=over 4
…		…
1819	=item C<EV_DEFAULT>, C<EV_DEFAULT_>	2646	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
1820		2647
1821	Similar to the other two macros, this gives you the value of the default	2648	Similar to the other two macros, this gives you the value of the default
1822	loop, if multiple loops are supported ("ev loop default").	2649	loop, if multiple loops are supported ("ev loop default").
1823		2650
		2651	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
		2652
		2653	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
		2654	default loop has been initialised (C<UC> == unchecked). Their behaviour
		2655	is undefined when the default loop has not been initialised by a previous
		2656	execution of C<EV_DEFAULT>, C<EV_DEFAULT_> or C<ev_default_init (...)>.
		2657
		2658	It is often prudent to use C<EV_DEFAULT> when initialising the first
		2659	watcher in a function but use C<EV_DEFAULT_UC> afterwards.
		2660
1824	=back	2661	=back
1825		2662
1826	Example: Declare and initialise a check watcher, working regardless of	2663	Example: Declare and initialise a check watcher, utilising the above
1827	wether multiple loops are supported or not.	2664	macros so it will work regardless of whether multiple loops are supported
		2665	or not.
1828		2666
1829	static void	2667	static void
1830	check_cb (EV_P_ ev_timer *w, int revents)	2668	check_cb (EV_P_ ev_timer *w, int revents)
1831	{	2669	{
1832	ev_check_stop (EV_A_ w);	2670	ev_check_stop (EV_A_ w);
…		…
1835	ev_check check;	2673	ev_check check;
1836	ev_check_init (&check, check_cb);	2674	ev_check_init (&check, check_cb);
1837	ev_check_start (EV_DEFAULT_ &check);	2675	ev_check_start (EV_DEFAULT_ &check);
1838	ev_loop (EV_DEFAULT_ 0);	2676	ev_loop (EV_DEFAULT_ 0);
1839		2677
1840
1841	=head1 EMBEDDING	2678	=head1 EMBEDDING
1842		2679
1843	Libev can (and often is) directly embedded into host	2680	Libev can (and often is) directly embedded into host
1844	applications. Examples of applications that embed it include the Deliantra	2681	applications. Examples of applications that embed it include the Deliantra
1845	Game Server, the EV perl module, the GNU Virtual Private Ethernet (gvpe)	2682	Game Server, the EV perl module, the GNU Virtual Private Ethernet (gvpe)
1846	and rxvt-unicode.	2683	and rxvt-unicode.
1847		2684
1848	The goal is to enable you to just copy the neecssary files into your	2685	The goal is to enable you to just copy the necessary files into your
1849	source directory without having to change even a single line in them, so	2686	source directory without having to change even a single line in them, so
1850	you can easily upgrade by simply copying (or having a checked-out copy of	2687	you can easily upgrade by simply copying (or having a checked-out copy of
1851	libev somewhere in your source tree).	2688	libev somewhere in your source tree).
1852		2689
1853	=head2 FILESETS	2690	=head2 FILESETS
…		…
1884	ev_vars.h	2721	ev_vars.h
1885	ev_wrap.h	2722	ev_wrap.h
1886		2723
1887	ev_win32.c required on win32 platforms only	2724	ev_win32.c required on win32 platforms only
1888		2725
1889	ev_select.c only when select backend is enabled (which is by default)	2726	ev_select.c only when select backend is enabled (which is enabled by default)
1890	ev_poll.c only when poll backend is enabled (disabled by default)	2727	ev_poll.c only when poll backend is enabled (disabled by default)
1891	ev_epoll.c only when the epoll backend is enabled (disabled by default)	2728	ev_epoll.c only when the epoll backend is enabled (disabled by default)
1892	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)	2729	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)
1893	ev_port.c only when the solaris port backend is enabled (disabled by default)	2730	ev_port.c only when the solaris port backend is enabled (disabled by default)
1894		2731
…		…
1923		2760
1924	libev.m4	2761	libev.m4
1925		2762
1926	=head2 PREPROCESSOR SYMBOLS/MACROS	2763	=head2 PREPROCESSOR SYMBOLS/MACROS
1927		2764
1928	Libev can be configured via a variety of preprocessor symbols you have to define	2765	Libev can be configured via a variety of preprocessor symbols you have to
1929	before including any of its files. The default is not to build for multiplicity	2766	define before including any of its files. The default in the absense of
1930	and only include the select backend.	2767	autoconf is noted for every option.
1931		2768
1932	=over 4	2769	=over 4
1933		2770
1934	=item EV_STANDALONE	2771	=item EV_STANDALONE
1935		2772
…		…
1943		2780
1944	If defined to be C<1>, libev will try to detect the availability of the	2781	If defined to be C<1>, libev will try to detect the availability of the
1945	monotonic clock option at both compiletime and runtime. Otherwise no use	2782	monotonic clock option at both compiletime and runtime. Otherwise no use
1946	of the monotonic clock option will be attempted. If you enable this, you	2783	of the monotonic clock option will be attempted. If you enable this, you
1947	usually have to link against librt or something similar. Enabling it when	2784	usually have to link against librt or something similar. Enabling it when
1948	the functionality isn't available is safe, though, althoguh you have	2785	the functionality isn't available is safe, though, although you have
1949	to make sure you link against any libraries where the C<clock_gettime>	2786	to make sure you link against any libraries where the C<clock_gettime>
1950	function is hiding in (often F<-lrt>).	2787	function is hiding in (often F<-lrt>).
1951		2788
1952	=item EV_USE_REALTIME	2789	=item EV_USE_REALTIME
1953		2790
1954	If defined to be C<1>, libev will try to detect the availability of the	2791	If defined to be C<1>, libev will try to detect the availability of the
1955	realtime clock option at compiletime (and assume its availability at	2792	realtime clock option at compiletime (and assume its availability at
1956	runtime if successful). Otherwise no use of the realtime clock option will	2793	runtime if successful). Otherwise no use of the realtime clock option will
1957	be attempted. This effectively replaces C<gettimeofday> by C<clock_get	2794	be attempted. This effectively replaces C<gettimeofday> by C<clock_get
1958	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See tzhe note about libraries	2795	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See the
1959	in the description of C<EV_USE_MONOTONIC>, though.	2796	note about libraries in the description of C<EV_USE_MONOTONIC>, though.
		2797
		2798	=item EV_USE_NANOSLEEP
		2799
		2800	If defined to be C<1>, libev will assume that C<nanosleep ()> is available
		2801	and will use it for delays. Otherwise it will use C<select ()>.
		2802
		2803	=item EV_USE_EVENTFD
		2804
		2805	If defined to be C<1>, then libev will assume that C<eventfd ()> is
		2806	available and will probe for kernel support at runtime. This will improve
		2807	C<ev_signal> and C<ev_async> performance and reduce resource consumption.
		2808	If undefined, it will be enabled if the headers indicate GNU/Linux + Glibc
		2809	2.7 or newer, otherwise disabled.
1960		2810
1961	=item EV_USE_SELECT	2811	=item EV_USE_SELECT
1962		2812
1963	If undefined or defined to be C<1>, libev will compile in support for the	2813	If undefined or defined to be C<1>, libev will compile in support for the
1964	C<select>(2) backend. No attempt at autodetection will be done: if no	2814	C<select>(2) backend. No attempt at autodetection will be done: if no
…		…
1983	be used is the winsock select). This means that it will call	2833	be used is the winsock select). This means that it will call
1984	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	2834	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
1985	it is assumed that all these functions actually work on fds, even	2835	it is assumed that all these functions actually work on fds, even
1986	on win32. Should not be defined on non-win32 platforms.	2836	on win32. Should not be defined on non-win32 platforms.
1987		2837
		2838	=item EV_FD_TO_WIN32_HANDLE
		2839
		2840	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
		2841	file descriptors to socket handles. When not defining this symbol (the
		2842	default), then libev will call C<_get_osfhandle>, which is usually
		2843	correct. In some cases, programs use their own file descriptor management,
		2844	in which case they can provide this function to map fds to socket handles.
		2845
1988	=item EV_USE_POLL	2846	=item EV_USE_POLL
1989		2847
1990	If defined to be C<1>, libev will compile in support for the C<poll>(2)	2848	If defined to be C<1>, libev will compile in support for the C<poll>(2)
1991	backend. Otherwise it will be enabled on non-win32 platforms. It	2849	backend. Otherwise it will be enabled on non-win32 platforms. It
1992	takes precedence over select.	2850	takes precedence over select.
1993		2851
1994	=item EV_USE_EPOLL	2852	=item EV_USE_EPOLL
1995		2853
1996	If defined to be C<1>, libev will compile in support for the Linux	2854	If defined to be C<1>, libev will compile in support for the Linux
1997	C<epoll>(7) backend. Its availability will be detected at runtime,	2855	C<epoll>(7) backend. Its availability will be detected at runtime,
1998	otherwise another method will be used as fallback. This is the	2856	otherwise another method will be used as fallback. This is the preferred
1999	preferred backend for GNU/Linux systems.	2857	backend for GNU/Linux systems. If undefined, it will be enabled if the
		2858	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
2000		2859
2001	=item EV_USE_KQUEUE	2860	=item EV_USE_KQUEUE
2002		2861
2003	If defined to be C<1>, libev will compile in support for the BSD style	2862	If defined to be C<1>, libev will compile in support for the BSD style
2004	C<kqueue>(2) backend. Its actual availability will be detected at runtime,	2863	C<kqueue>(2) backend. Its actual availability will be detected at runtime,
…		…
2023		2882
2024	=item EV_USE_INOTIFY	2883	=item EV_USE_INOTIFY
2025		2884
2026	If defined to be C<1>, libev will compile in support for the Linux inotify	2885	If defined to be C<1>, libev will compile in support for the Linux inotify
2027	interface to speed up C<ev_stat> watchers. Its actual availability will	2886	interface to speed up C<ev_stat> watchers. Its actual availability will
2028	be detected at runtime.	2887	be detected at runtime. If undefined, it will be enabled if the headers
		2888	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
		2889
		2890	=item EV_ATOMIC_T
		2891
		2892	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
		2893	access is atomic with respect to other threads or signal contexts. No such
		2894	type is easily found in the C language, so you can provide your own type
		2895	that you know is safe for your purposes. It is used both for signal handler "locking"
		2896	as well as for signal and thread safety in C<ev_async> watchers.
		2897
		2898	In the absense of this define, libev will use C<sig_atomic_t volatile>
		2899	(from F<signal.h>), which is usually good enough on most platforms.
2029		2900
2030	=item EV_H	2901	=item EV_H
2031		2902
2032	The name of the F<ev.h> header file used to include it. The default if	2903	The name of the F<ev.h> header file used to include it. The default if
2033	undefined is C<< <ev.h> >> in F<event.h> and C<"ev.h"> in F<ev.c>. This	2904	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
2034	can be used to virtually rename the F<ev.h> header file in case of conflicts.	2905	used to virtually rename the F<ev.h> header file in case of conflicts.
2035		2906
2036	=item EV_CONFIG_H	2907	=item EV_CONFIG_H
2037		2908
2038	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	2909	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
2039	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	2910	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
2040	C<EV_H>, above.	2911	C<EV_H>, above.
2041		2912
2042	=item EV_EVENT_H	2913	=item EV_EVENT_H
2043		2914
2044	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	2915	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
2045	of how the F<event.h> header can be found.	2916	of how the F<event.h> header can be found, the default is C<"event.h">.
2046		2917
2047	=item EV_PROTOTYPES	2918	=item EV_PROTOTYPES
2048		2919
2049	If defined to be C<0>, then F<ev.h> will not define any function	2920	If defined to be C<0>, then F<ev.h> will not define any function
2050	prototypes, but still define all the structs and other symbols. This is	2921	prototypes, but still define all the structs and other symbols. This is
…		…
2057	will have the C<struct ev_loop *> as first argument, and you can create	2928	will have the C<struct ev_loop *> as first argument, and you can create
2058	additional independent event loops. Otherwise there will be no support	2929	additional independent event loops. Otherwise there will be no support
2059	for multiple event loops and there is no first event loop pointer	2930	for multiple event loops and there is no first event loop pointer
2060	argument. Instead, all functions act on the single default loop.	2931	argument. Instead, all functions act on the single default loop.
2061		2932
		2933	=item EV_MINPRI
		2934
		2935	=item EV_MAXPRI
		2936
		2937	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to
		2938	C<EV_MAXPRI>, but otherwise there are no non-obvious limitations. You can
		2939	provide for more priorities by overriding those symbols (usually defined
		2940	to be C<-2> and C<2>, respectively).
		2941
		2942	When doing priority-based operations, libev usually has to linearly search
		2943	all the priorities, so having many of them (hundreds) uses a lot of space
		2944	and time, so using the defaults of five priorities (-2 .. +2) is usually
		2945	fine.
		2946
		2947	If your embedding app does not need any priorities, defining these both to
		2948	C<0> will save some memory and cpu.
		2949
2062	=item EV_PERIODIC_ENABLE	2950	=item EV_PERIODIC_ENABLE
2063		2951
2064	If undefined or defined to be C<1>, then periodic timers are supported. If	2952	If undefined or defined to be C<1>, then periodic timers are supported. If
2065	defined to be C<0>, then they are not. Disabling them saves a few kB of	2953	defined to be C<0>, then they are not. Disabling them saves a few kB of
2066	code.	2954	code.
2067		2955
		2956	=item EV_IDLE_ENABLE
		2957
		2958	If undefined or defined to be C<1>, then idle watchers are supported. If
		2959	defined to be C<0>, then they are not. Disabling them saves a few kB of
		2960	code.
		2961
2068	=item EV_EMBED_ENABLE	2962	=item EV_EMBED_ENABLE
2069		2963
2070	If undefined or defined to be C<1>, then embed watchers are supported. If	2964	If undefined or defined to be C<1>, then embed watchers are supported. If
2071	defined to be C<0>, then they are not.	2965	defined to be C<0>, then they are not.
2072		2966
…		…
2078	=item EV_FORK_ENABLE	2972	=item EV_FORK_ENABLE
2079		2973
2080	If undefined or defined to be C<1>, then fork watchers are supported. If	2974	If undefined or defined to be C<1>, then fork watchers are supported. If
2081	defined to be C<0>, then they are not.	2975	defined to be C<0>, then they are not.
2082		2976
		2977	=item EV_ASYNC_ENABLE
		2978
		2979	If undefined or defined to be C<1>, then async watchers are supported. If
		2980	defined to be C<0>, then they are not.
		2981
2083	=item EV_MINIMAL	2982	=item EV_MINIMAL
2084		2983
2085	If you need to shave off some kilobytes of code at the expense of some	2984	If you need to shave off some kilobytes of code at the expense of some
2086	speed, define this symbol to C<1>. Currently only used for gcc to override	2985	speed, define this symbol to C<1>. Currently this is used to override some
2087	some inlining decisions, saves roughly 30% codesize of amd64.	2986	inlining decisions, saves roughly 30% codesize of amd64. It also selects a
		2987	much smaller 2-heap for timer management over the default 4-heap.
2088		2988
2089	=item EV_PID_HASHSIZE	2989	=item EV_PID_HASHSIZE
2090		2990
2091	C<ev_child> watchers use a small hash table to distribute workload by	2991	C<ev_child> watchers use a small hash table to distribute workload by
2092	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	2992	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more
2093	than enough. If you need to manage thousands of children you might want to	2993	than enough. If you need to manage thousands of children you might want to
2094	increase this value (I<must> be a power of two).	2994	increase this value (I<must> be a power of two).
2095		2995
2096	=item EV_INOTIFY_HASHSIZE	2996	=item EV_INOTIFY_HASHSIZE
2097		2997
2098	C<ev_staz> watchers use a small hash table to distribute workload by	2998	C<ev_stat> watchers use a small hash table to distribute workload by
2099	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	2999	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),
2100	usually more than enough. If you need to manage thousands of C<ev_stat>	3000	usually more than enough. If you need to manage thousands of C<ev_stat>
2101	watchers you might want to increase this value (I<must> be a power of	3001	watchers you might want to increase this value (I<must> be a power of
2102	two).	3002	two).
2103		3003
		3004	=item EV_USE_4HEAP
		3005
		3006	Heaps are not very cache-efficient. To improve the cache-efficiency of the
		3007	timer and periodics heap, libev uses a 4-heap when this symbol is defined
		3008	to C<1>. The 4-heap uses more complicated (longer) code but has
		3009	noticably faster performance with many (thousands) of watchers.
		3010
		3011	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>
		3012	(disabled).
		3013
		3014	=item EV_HEAP_CACHE_AT
		3015
		3016	Heaps are not very cache-efficient. To improve the cache-efficiency of the
		3017	timer and periodics heap, libev can cache the timestamp (I<at>) within
		3018	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
		3019	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
		3020	but avoids random read accesses on heap changes. This improves performance
		3021	noticably with with many (hundreds) of watchers.
		3022
		3023	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>
		3024	(disabled).
		3025
2104	=item EV_COMMON	3026	=item EV_COMMON
2105		3027
2106	By default, all watchers have a C<void *data> member. By redefining	3028	By default, all watchers have a C<void *data> member. By redefining
2107	this macro to a something else you can include more and other types of	3029	this macro to a something else you can include more and other types of
2108	members. You have to define it each time you include one of the files,	3030	members. You have to define it each time you include one of the files,
…		…
2120		3042
2121	=item ev_set_cb (ev, cb)	3043	=item ev_set_cb (ev, cb)
2122		3044
2123	Can be used to change the callback member declaration in each watcher,	3045	Can be used to change the callback member declaration in each watcher,
2124	and the way callbacks are invoked and set. Must expand to a struct member	3046	and the way callbacks are invoked and set. Must expand to a struct member
2125	definition and a statement, respectively. See the F<ev.v> header file for	3047	definition and a statement, respectively. See the F<ev.h> header file for
2126	their default definitions. One possible use for overriding these is to	3048	their default definitions. One possible use for overriding these is to
2127	avoid the C<struct ev_loop *> as first argument in all cases, or to use	3049	avoid the C<struct ev_loop *> as first argument in all cases, or to use
2128	method calls instead of plain function calls in C++.	3050	method calls instead of plain function calls in C++.
		3051
		3052	=head2 EXPORTED API SYMBOLS
		3053
		3054	If you need to re-export the API (e.g. via a dll) and you need a list of
		3055	exported symbols, you can use the provided F<Symbol.*> files which list
		3056	all public symbols, one per line:
		3057
		3058	Symbols.ev for libev proper
		3059	Symbols.event for the libevent emulation
		3060
		3061	This can also be used to rename all public symbols to avoid clashes with
		3062	multiple versions of libev linked together (which is obviously bad in
		3063	itself, but sometimes it is inconvinient to avoid this).
		3064
		3065	A sed command like this will create wrapper C<#define>'s that you need to
		3066	include before including F<ev.h>:
		3067
		3068	<Symbols.ev sed -e "s/.*/#define & myprefix_&/" >wrap.h
		3069
		3070	This would create a file F<wrap.h> which essentially looks like this:
		3071
		3072	#define ev_backend myprefix_ev_backend
		3073	#define ev_check_start myprefix_ev_check_start
		3074	#define ev_check_stop myprefix_ev_check_stop
		3075	...
2129		3076
2130	=head2 EXAMPLES	3077	=head2 EXAMPLES
2131		3078
2132	For a real-world example of a program the includes libev	3079	For a real-world example of a program the includes libev
2133	verbatim, you can have a look at the EV perl module	3080	verbatim, you can have a look at the EV perl module
…		…
2136	interface) and F<EV.xs> (implementation) files. Only the F<EV.xs> file	3083	interface) and F<EV.xs> (implementation) files. Only the F<EV.xs> file
2137	will be compiled. It is pretty complex because it provides its own header	3084	will be compiled. It is pretty complex because it provides its own header
2138	file.	3085	file.
2139		3086
2140	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	3087	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
2141	that everybody includes and which overrides some autoconf choices:	3088	that everybody includes and which overrides some configure choices:
2142		3089
		3090	#define EV_MINIMAL 1
2143	#define EV_USE_POLL 0	3091	#define EV_USE_POLL 0
2144	#define EV_MULTIPLICITY 0	3092	#define EV_MULTIPLICITY 0
2145	#define EV_PERIODICS 0	3093	#define EV_PERIODIC_ENABLE 0
		3094	#define EV_STAT_ENABLE 0
		3095	#define EV_FORK_ENABLE 0
2146	#define EV_CONFIG_H <config.h>	3096	#define EV_CONFIG_H <config.h>
		3097	#define EV_MINPRI 0
		3098	#define EV_MAXPRI 0
2147		3099
2148	#include "ev++.h"	3100	#include "ev++.h"
2149		3101
2150	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	3102	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
2151		3103
2152	#include "ev_cpp.h"	3104	#include "ev_cpp.h"
2153	#include "ev.c"	3105	#include "ev.c"
		3106
		3107
		3108	=head1 THREADS AND COROUTINES
		3109
		3110	=head2 THREADS
		3111
		3112	Libev itself is completely threadsafe, but it uses no locking. This
		3113	means that you can use as many loops as you want in parallel, as long as
		3114	only one thread ever calls into one libev function with the same loop
		3115	parameter.
		3116
		3117	Or put differently: calls with different loop parameters can be done in
		3118	parallel from multiple threads, calls with the same loop parameter must be
		3119	done serially (but can be done from different threads, as long as only one
		3120	thread ever is inside a call at any point in time, e.g. by using a mutex
		3121	per loop).
		3122
		3123	If you want to know which design is best for your problem, then I cannot
		3124	help you but by giving some generic advice:
		3125
		3126	=over 4
		3127
		3128	=item * most applications have a main thread: use the default libev loop
		3129	in that thread, or create a seperate thread running only the default loop.
		3130
		3131	This helps integrating other libraries or software modules that use libev
		3132	themselves and don't care/know about threading.
		3133
		3134	=item * one loop per thread is usually a good model.
		3135
		3136	Doing this is almost never wrong, sometimes a better-performance model
		3137	exists, but it is always a good start.
		3138
		3139	=item * other models exist, such as the leader/follower pattern, where one
		3140	loop is handed through multiple threads in a kind of round-robbin fashion.
		3141
		3142	Chosing a model is hard - look around, learn, know that usually you cna do
		3143	better than you currently do :-)
		3144
		3145	=item * often you need to talk to some other thread which blocks in the
		3146	event loop - C<ev_async> watchers can be used to wake them up from other
		3147	threads safely (or from signal contexts...).
		3148
		3149	=back
		3150
		3151	=head2 COROUTINES
		3152
		3153	Libev is much more accomodating to coroutines ("cooperative threads"):
		3154	libev fully supports nesting calls to it's functions from different
		3155	coroutines (e.g. you can call C<ev_loop> on the same loop from two
		3156	different coroutines and switch freely between both coroutines running the
		3157	loop, as long as you don't confuse yourself). The only exception is that
		3158	you must not do this from C<ev_periodic> reschedule callbacks.
		3159
		3160	Care has been invested into making sure that libev does not keep local
		3161	state inside C<ev_loop>, and other calls do not usually allow coroutine
		3162	switches.
2154		3163
2155		3164
2156	=head1 COMPLEXITIES	3165	=head1 COMPLEXITIES
2157		3166
2158	In this section the complexities of (many of) the algorithms used inside	3167	In this section the complexities of (many of) the algorithms used inside
2159	libev will be explained. For complexity discussions about backends see the	3168	libev will be explained. For complexity discussions about backends see the
2160	documentation for C<ev_default_init>.	3169	documentation for C<ev_default_init>.
2161		3170
		3171	All of the following are about amortised time: If an array needs to be
		3172	extended, libev needs to realloc and move the whole array, but this
		3173	happens asymptotically never with higher number of elements, so O(1) might
		3174	mean it might do a lengthy realloc operation in rare cases, but on average
		3175	it is much faster and asymptotically approaches constant time.
		3176
2162	=over 4	3177	=over 4
2163		3178
2164	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)	3179	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)
2165		3180
		3181	This means that, when you have a watcher that triggers in one hour and
		3182	there are 100 watchers that would trigger before that then inserting will
		3183	have to skip roughly seven (C<ld 100>) of these watchers.
		3184
2166	=item Changing timer/periodic watchers (by autorepeat, again): O(log skipped_other_timers)	3185	=item Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)
2167		3186
		3187	That means that changing a timer costs less than removing/adding them
		3188	as only the relative motion in the event queue has to be paid for.
		3189
2168	=item Starting io/check/prepare/idle/signal/child watchers: O(1)	3190	=item Starting io/check/prepare/idle/signal/child/fork/async watchers: O(1)
2169		3191
		3192	These just add the watcher into an array or at the head of a list.
		3193
2170	=item Stopping check/prepare/idle watchers: O(1)	3194	=item Stopping check/prepare/idle/fork/async watchers: O(1)
2171		3195
2172	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))	3196	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
2173		3197
		3198	These watchers are stored in lists then need to be walked to find the
		3199	correct watcher to remove. The lists are usually short (you don't usually
		3200	have many watchers waiting for the same fd or signal).
		3201
2174	=item Finding the next timer per loop iteration: O(1)	3202	=item Finding the next timer in each loop iteration: O(1)
		3203
		3204	By virtue of using a binary or 4-heap, the next timer is always found at a
		3205	fixed position in the storage array.
2175		3206
2176	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)	3207	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
2177		3208
2178	=item Activating one watcher: O(1)	3209	A change means an I/O watcher gets started or stopped, which requires
		3210	libev to recalculate its status (and possibly tell the kernel, depending
		3211	on backend and wether C<ev_io_set> was used).
		3212
		3213	=item Activating one watcher (putting it into the pending state): O(1)
		3214
		3215	=item Priority handling: O(number_of_priorities)
		3216
		3217	Priorities are implemented by allocating some space for each
		3218	priority. When doing priority-based operations, libev usually has to
		3219	linearly search all the priorities, but starting/stopping and activating
		3220	watchers becomes O(1) w.r.t. priority handling.
		3221
		3222	=item Sending an ev_async: O(1)
		3223
		3224	=item Processing ev_async_send: O(number_of_async_watchers)
		3225
		3226	=item Processing signals: O(max_signal_number)
		3227
		3228	Sending involves a syscall I<iff> there were no other C<ev_async_send>
		3229	calls in the current loop iteration. Checking for async and signal events
		3230	involves iterating over all running async watchers or all signal numbers.
2179		3231
2180	=back	3232	=back
2181		3233
2182		3234
		3235	=head1 Win32 platform limitations and workarounds
		3236
		3237	Win32 doesn't support any of the standards (e.g. POSIX) that libev
		3238	requires, and its I/O model is fundamentally incompatible with the POSIX
		3239	model. Libev still offers limited functionality on this platform in
		3240	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
		3241	descriptors. This only applies when using Win32 natively, not when using
		3242	e.g. cygwin.
		3243
		3244	Lifting these limitations would basically require the full
		3245	re-implementation of the I/O system. If you are into these kinds of
		3246	things, then note that glib does exactly that for you in a very portable
		3247	way (note also that glib is the slowest event library known to man).
		3248
		3249	There is no supported compilation method available on windows except
		3250	embedding it into other applications.
		3251
		3252	Due to the many, low, and arbitrary limits on the win32 platform and
		3253	the abysmal performance of winsockets, using a large number of sockets
		3254	is not recommended (and not reasonable). If your program needs to use
		3255	more than a hundred or so sockets, then likely it needs to use a totally
		3256	different implementation for windows, as libev offers the POSIX readiness
		3257	notification model, which cannot be implemented efficiently on windows
		3258	(microsoft monopoly games).
		3259
		3260	=over 4
		3261
		3262	=item The winsocket select function
		3263
		3264	The winsocket C<select> function doesn't follow POSIX in that it requires
		3265	socket I<handles> and not socket I<file descriptors>. This makes select
		3266	very inefficient, and also requires a mapping from file descriptors
		3267	to socket handles. See the discussion of the C<EV_SELECT_USE_FD_SET>,
		3268	C<EV_SELECT_IS_WINSOCKET> and C<EV_FD_TO_WIN32_HANDLE> preprocessor
		3269	symbols for more info.
		3270
		3271	The configuration for a "naked" win32 using the microsoft runtime
		3272	libraries and raw winsocket select is:
		3273
		3274	#define EV_USE_SELECT 1
		3275	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
		3276
		3277	Note that winsockets handling of fd sets is O(n), so you can easily get a
		3278	complexity in the O(n²) range when using win32.
		3279
		3280	=item Limited number of file descriptors
		3281
		3282	Windows has numerous arbitrary (and low) limits on things.
		3283
		3284	Early versions of winsocket's select only supported waiting for a maximum
		3285	of C<64> handles (probably owning to the fact that all windows kernels
		3286	can only wait for C<64> things at the same time internally; microsoft
		3287	recommends spawning a chain of threads and wait for 63 handles and the
		3288	previous thread in each. Great).
		3289
		3290	Newer versions support more handles, but you need to define C<FD_SETSIZE>
		3291	to some high number (e.g. C<2048>) before compiling the winsocket select
		3292	call (which might be in libev or elsewhere, for example, perl does its own
		3293	select emulation on windows).
		3294
		3295	Another limit is the number of file descriptors in the microsoft runtime
		3296	libraries, which by default is C<64> (there must be a hidden I<64> fetish
		3297	or something like this inside microsoft). You can increase this by calling
		3298	C<_setmaxstdio>, which can increase this limit to C<2048> (another
		3299	arbitrary limit), but is broken in many versions of the microsoft runtime
		3300	libraries.
		3301
		3302	This might get you to about C<512> or C<2048> sockets (depending on
		3303	windows version and/or the phase of the moon). To get more, you need to
		3304	wrap all I/O functions and provide your own fd management, but the cost of
		3305	calling select (O(n²)) will likely make this unworkable.
		3306
		3307	=back
		3308
		3309
		3310	=head1 PORTABILITY REQUIREMENTS
		3311
		3312	In addition to a working ISO-C implementation, libev relies on a few
		3313	additional extensions:
		3314
		3315	=over 4
		3316
		3317	=item C<sig_atomic_t volatile> must be thread-atomic as well
		3318
		3319	The type C<sig_atomic_t volatile> (or whatever is defined as
		3320	C<EV_ATOMIC_T>) must be atomic w.r.t. accesses from different
		3321	threads. This is not part of the specification for C<sig_atomic_t>, but is
		3322	believed to be sufficiently portable.
		3323
		3324	=item C<sigprocmask> must work in a threaded environment
		3325
		3326	Libev uses C<sigprocmask> to temporarily block signals. This is not
		3327	allowed in a threaded program (C<pthread_sigmask> has to be used). Typical
		3328	pthread implementations will either allow C<sigprocmask> in the "main
		3329	thread" or will block signals process-wide, both behaviours would
		3330	be compatible with libev. Interaction between C<sigprocmask> and
		3331	C<pthread_sigmask> could complicate things, however.
		3332
		3333	The most portable way to handle signals is to block signals in all threads
		3334	except the initial one, and run the default loop in the initial thread as
		3335	well.
		3336
		3337	=item C<long> must be large enough for common memory allocation sizes
		3338
		3339	To improve portability and simplify using libev, libev uses C<long>
		3340	internally instead of C<size_t> when allocating its data structures. On
		3341	non-POSIX systems (Microsoft...) this might be unexpectedly low, but
		3342	is still at least 31 bits everywhere, which is enough for hundreds of
		3343	millions of watchers.
		3344
		3345	=item C<double> must hold a time value in seconds with enough accuracy
		3346
		3347	The type C<double> is used to represent timestamps. It is required to
		3348	have at least 51 bits of mantissa (and 9 bits of exponent), which is good
		3349	enough for at least into the year 4000. This requirement is fulfilled by
		3350	implementations implementing IEEE 754 (basically all existing ones).
		3351
		3352	=back
		3353
		3354	If you know of other additional requirements drop me a note.
		3355
		3356
		3357	=head1 VALGRIND
		3358
		3359	Valgrind has a special section here because it is a popular tool that is
		3360	highly useful, but valgrind reports are very hard to interpret.
		3361
		3362	If you think you found a bug (memory leak, uninitialised data access etc.)
		3363	in libev, then check twice: If valgrind reports something like:
		3364
		3365	==2274== definitely lost: 0 bytes in 0 blocks.
		3366	==2274== possibly lost: 0 bytes in 0 blocks.
		3367	==2274== still reachable: 256 bytes in 1 blocks.
		3368
		3369	then there is no memory leak. Similarly, under some circumstances,
		3370	valgrind might report kernel bugs as if it were a bug in libev, or it
		3371	might be confused (it is a very good tool, but only a tool).
		3372
		3373	If you are unsure about something, feel free to contact the mailing list
		3374	with the full valgrind report and an explanation on why you think this is
		3375	a bug in libev. However, don't be annoyed when you get a brisk "this is
		3376	no bug" answer and take the chance of learning how to interpret valgrind
		3377	properly.
		3378
		3379	If you need, for some reason, empty reports from valgrind for your project
		3380	I suggest using suppression lists.
		3381
		3382
2183	=head1 AUTHOR	3383	=head1 AUTHOR
2184		3384
2185	Marc Lehmann <libev@schmorp.de>.	3385	Marc Lehmann <libev@schmorp.de>.
2186		3386

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines