ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.16 by root, Mon Nov 12 08:47:14 2007 UTC vs.
Revision 1.59 by root, Wed Nov 28 17:32:24 2007 UTC

…		…
3	libev - a high performance full-featured event loop written in C	3	libev - a high performance full-featured event loop written in C
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	#include <ev.h>	7	#include <ev.h>
		8
		9	=head1 EXAMPLE PROGRAM
		10
		11	#include <ev.h>
		12
		13	ev_io stdin_watcher;
		14	ev_timer timeout_watcher;
		15
		16	/* called when data readable on stdin */
		17	static void
		18	stdin_cb (EV_P_ struct ev_io *w, int revents)
		19	{
		20	/* puts ("stdin ready"); */
		21	ev_io_stop (EV_A_ w); /* just a syntax example */
		22	ev_unloop (EV_A_ EVUNLOOP_ALL); /* leave all loop calls */
		23	}
		24
		25	static void
		26	timeout_cb (EV_P_ struct ev_timer *w, int revents)
		27	{
		28	/* puts ("timeout"); */
		29	ev_unloop (EV_A_ EVUNLOOP_ONE); /* leave one loop call */
		30	}
		31
		32	int
		33	main (void)
		34	{
		35	struct ev_loop *loop = ev_default_loop (0);
		36
		37	/* initialise an io watcher, then start it */
		38	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
		39	ev_io_start (loop, &stdin_watcher);
		40
		41	/* simple non-repeating 5.5 second timeout */
		42	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
		43	ev_timer_start (loop, &timeout_watcher);
		44
		45	/* loop till timeout or data ready */
		46	ev_loop (loop, 0);
		47
		48	return 0;
		49	}
8		50
9	=head1 DESCRIPTION	51	=head1 DESCRIPTION
10		52
11	Libev is an event loop: you register interest in certain events (such as a	53	Libev is an event loop: you register interest in certain events (such as a
12	file descriptor being readable or a timeout occuring), and it will manage	54	file descriptor being readable or a timeout occuring), and it will manage
…		…
21	details of the event, and then hand it over to libev by I<starting> the	63	details of the event, and then hand it over to libev by I<starting> the
22	watcher.	64	watcher.
23		65
24	=head1 FEATURES	66	=head1 FEATURES
25		67
26	Libev supports select, poll, the linux-specific epoll and the bsd-specific	68	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
27	kqueue mechanisms for file descriptor events, relative timers, absolute	69	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
28	timers with customised rescheduling, signal events, process status change	70	for file descriptor events (C<ev_io>), the Linux C<inotify> interface
29	events (related to SIGCHLD), and event watchers dealing with the event	71	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers
30	loop mechanism itself (idle, prepare and check watchers). It also is quite	72	with customised rescheduling (C<ev_periodic>), synchronous signals
		73	(C<ev_signal>), process status change events (C<ev_child>), and event
		74	watchers dealing with the event loop mechanism itself (C<ev_idle>,
		75	C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as
		76	file watchers (C<ev_stat>) and even limited support for fork events
		77	(C<ev_fork>).
		78
		79	It also is quite fast (see this
31	fast (see this L<benchmark|http://libev.schmorp.de/bench.html> comparing	80	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
32	it to libevent for example).	81	for example).
33		82
34	=head1 CONVENTIONS	83	=head1 CONVENTIONS
35		84
36	Libev is very configurable. In this manual the default configuration	85	Libev is very configurable. In this manual the default configuration will
37	will be described, which supports multiple event loops. For more info	86	be described, which supports multiple event loops. For more info about
38	about various configuration options please have a look at the file	87	various configuration options please have a look at B<EMBED> section in
39	F<README.embed> in the libev distribution. If libev was configured without	88	this manual. If libev was configured without support for multiple event
40	support for multiple event loops, then all functions taking an initial	89	loops, then all functions taking an initial argument of name C<loop>
41	argument of name C<loop> (which is always of type C<struct ev_loop *>)	90	(which is always of type C<struct ev_loop *>) will not have this argument.
42	will not have this argument.
43		91
44	=head1 TIME AND OTHER GLOBAL FUNCTIONS	92	=head1 TIME REPRESENTATION
45		93
46	Libev represents time as a single floating point number, representing the	94	Libev represents time as a single floating point number, representing the
47	(fractional) number of seconds since the (POSIX) epoch (somewhere near	95	(fractional) number of seconds since the (POSIX) epoch (somewhere near
48	the beginning of 1970, details are complicated, don't ask). This type is	96	the beginning of 1970, details are complicated, don't ask). This type is
49	called C<ev_tstamp>, which is what you should use too. It usually aliases	97	called C<ev_tstamp>, which is what you should use too. It usually aliases
50	to the double type in C.	98	to the C<double> type in C, and when you need to do any calculations on
		99	it, you should treat it as such.
		100
		101	=head1 GLOBAL FUNCTIONS
		102
		103	These functions can be called anytime, even before initialising the
		104	library in any way.
51		105
52	=over 4	106	=over 4
53		107
54	=item ev_tstamp ev_time ()	108	=item ev_tstamp ev_time ()
55		109
56	Returns the current time as libev would use it.	110	Returns the current time as libev would use it. Please note that the
		111	C<ev_now> function is usually faster and also often returns the timestamp
		112	you actually want to know.
57		113
58	=item int ev_version_major ()	114	=item int ev_version_major ()
59		115
60	=item int ev_version_minor ()	116	=item int ev_version_minor ()
61		117
…		…
68	Usually, it's a good idea to terminate if the major versions mismatch,	124	Usually, it's a good idea to terminate if the major versions mismatch,
69	as this indicates an incompatible change. Minor versions are usually	125	as this indicates an incompatible change. Minor versions are usually
70	compatible to older versions, so a larger minor version alone is usually	126	compatible to older versions, so a larger minor version alone is usually
71	not a problem.	127	not a problem.
72		128
		129	Example: Make sure we haven't accidentally been linked against the wrong
		130	version.
		131
		132	assert (("libev version mismatch",
		133	ev_version_major () == EV_VERSION_MAJOR
		134	&& ev_version_minor () >= EV_VERSION_MINOR));
		135
		136	=item unsigned int ev_supported_backends ()
		137
		138	Return the set of all backends (i.e. their corresponding C<EV_BACKEND_*>
		139	value) compiled into this binary of libev (independent of their
		140	availability on the system you are running on). See C<ev_default_loop> for
		141	a description of the set values.
		142
		143	Example: make sure we have the epoll method, because yeah this is cool and
		144	a must have and can we have a torrent of it please!!!11
		145
		146	assert (("sorry, no epoll, no sex",
		147	ev_supported_backends () & EVBACKEND_EPOLL));
		148
		149	=item unsigned int ev_recommended_backends ()
		150
		151	Return the set of all backends compiled into this binary of libev and also
		152	recommended for this platform. This set is often smaller than the one
		153	returned by C<ev_supported_backends>, as for example kqueue is broken on
		154	most BSDs and will not be autodetected unless you explicitly request it
		155	(assuming you know what you are doing). This is the set of backends that
		156	libev will probe for if you specify no backends explicitly.
		157
		158	=item unsigned int ev_embeddable_backends ()
		159
		160	Returns the set of backends that are embeddable in other event loops. This
		161	is the theoretical, all-platform, value. To find which backends
		162	might be supported on the current system, you would need to look at
		163	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for
		164	recommended ones.
		165
		166	See the description of C<ev_embed> watchers for more info.
		167
73	=item ev_set_allocator (void *(*cb)(void *ptr, long size))	168	=item ev_set_allocator (void *(*cb)(void *ptr, long size))
74		169
75	Sets the allocation function to use (the prototype is similar to the	170	Sets the allocation function to use (the prototype is similar - the
76	realloc C function, the semantics are identical). It is used to allocate	171	semantics is identical - to the realloc C function). It is used to
77	and free memory (no surprises here). If it returns zero when memory	172	allocate and free memory (no surprises here). If it returns zero when
78	needs to be allocated, the library might abort or take some potentially	173	memory needs to be allocated, the library might abort or take some
79	destructive action. The default is your system realloc function.	174	potentially destructive action. The default is your system realloc
		175	function.
80		176
81	You could override this function in high-availability programs to, say,	177	You could override this function in high-availability programs to, say,
82	free some memory if it cannot allocate memory, to use a special allocator,	178	free some memory if it cannot allocate memory, to use a special allocator,
83	or even to sleep a while and retry until some memory is available.	179	or even to sleep a while and retry until some memory is available.
		180
		181	Example: Replace the libev allocator with one that waits a bit and then
		182	retries).
		183
		184	static void *
		185	persistent_realloc (void *ptr, size_t size)
		186	{
		187	for (;;)
		188	{
		189	void *newptr = realloc (ptr, size);
		190
		191	if (newptr)
		192	return newptr;
		193
		194	sleep (60);
		195	}
		196	}
		197
		198	...
		199	ev_set_allocator (persistent_realloc);
84		200
85	=item ev_set_syserr_cb (void (*cb)(const char *msg));	201	=item ev_set_syserr_cb (void (*cb)(const char *msg));
86		202
87	Set the callback function to call on a retryable syscall error (such	203	Set the callback function to call on a retryable syscall error (such
88	as failed select, poll, epoll_wait). The message is a printable string	204	as failed select, poll, epoll_wait). The message is a printable string
…		…
90	callback is set, then libev will expect it to remedy the sitution, no	206	callback is set, then libev will expect it to remedy the sitution, no
91	matter what, when it returns. That is, libev will generally retry the	207	matter what, when it returns. That is, libev will generally retry the
92	requested operation, or, if the condition doesn't go away, do bad stuff	208	requested operation, or, if the condition doesn't go away, do bad stuff
93	(such as abort).	209	(such as abort).
94		210
		211	Example: This is basically the same thing that libev does internally, too.
		212
		213	static void
		214	fatal_error (const char *msg)
		215	{
		216	perror (msg);
		217	abort ();
		218	}
		219
		220	...
		221	ev_set_syserr_cb (fatal_error);
		222
95	=back	223	=back
96		224
97	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	225	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP
98		226
99	An event loop is described by a C<struct ev_loop *>. The library knows two	227	An event loop is described by a C<struct ev_loop *>. The library knows two
100	types of such loops, the I<default> loop, which supports signals and child	228	types of such loops, the I<default> loop, which supports signals and child
101	events, and dynamically created loops which do not.	229	events, and dynamically created loops which do not.
102		230
103	If you use threads, a common model is to run the default event loop	231	If you use threads, a common model is to run the default event loop
104	in your main thread (or in a separate thrad) and for each thread you	232	in your main thread (or in a separate thread) and for each thread you
105	create, you also create another event loop. Libev itself does no locking	233	create, you also create another event loop. Libev itself does no locking
106	whatsoever, so if you mix calls to the same event loop in different	234	whatsoever, so if you mix calls to the same event loop in different
107	threads, make sure you lock (this is usually a bad idea, though, even if	235	threads, make sure you lock (this is usually a bad idea, though, even if
108	done correctly, because it's hideous and inefficient).	236	done correctly, because it's hideous and inefficient).
109		237
…		…
112	=item struct ev_loop *ev_default_loop (unsigned int flags)	240	=item struct ev_loop *ev_default_loop (unsigned int flags)
113		241
114	This will initialise the default event loop if it hasn't been initialised	242	This will initialise the default event loop if it hasn't been initialised
115	yet and return it. If the default loop could not be initialised, returns	243	yet and return it. If the default loop could not be initialised, returns
116	false. If it already was initialised it simply returns it (and ignores the	244	false. If it already was initialised it simply returns it (and ignores the
117	flags).	245	flags. If that is troubling you, check C<ev_backend ()> afterwards).
118		246
119	If you don't know what event loop to use, use the one returned from this	247	If you don't know what event loop to use, use the one returned from this
120	function.	248	function.
121		249
122	The flags argument can be used to specify special behaviour or specific	250	The flags argument can be used to specify special behaviour or specific
123	backends to use, and is usually specified as 0 (or EVFLAG_AUTO).	251	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
124		252
125	It supports the following flags:	253	The following flags are supported:
126		254
127	=over 4	255	=over 4
128		256
129	=item C<EVFLAG_AUTO>	257	=item C<EVFLAG_AUTO>
130		258
…		…
138	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will	266	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will
139	override the flags completely if it is found in the environment. This is	267	override the flags completely if it is found in the environment. This is
140	useful to try out specific backends to test their performance, or to work	268	useful to try out specific backends to test their performance, or to work
141	around bugs.	269	around bugs.
142		270
143	=item C<EVMETHOD_SELECT> (portable select backend)	271	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
144		272
		273	This is your standard select(2) backend. Not I<completely> standard, as
		274	libev tries to roll its own fd_set with no limits on the number of fds,
		275	but if that fails, expect a fairly low limit on the number of fds when
		276	using this backend. It doesn't scale too well (O(highest_fd)), but its usually
		277	the fastest backend for a low number of fds.
		278
145	=item C<EVMETHOD_POLL> (poll backend, available everywhere except on windows)	279	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)
146		280
147	=item C<EVMETHOD_EPOLL> (linux only)	281	And this is your standard poll(2) backend. It's more complicated than
		282	select, but handles sparse fds better and has no artificial limit on the
		283	number of fds you can use (except it will slow down considerably with a
		284	lot of inactive fds). It scales similarly to select, i.e. O(total_fds).
148		285
149	=item C<EVMETHOD_KQUEUE> (some bsds only)	286	=item C<EVBACKEND_EPOLL> (value 4, Linux)
150		287
151	=item C<EVMETHOD_DEVPOLL> (solaris 8 only)	288	For few fds, this backend is a bit little slower than poll and select,
		289	but it scales phenomenally better. While poll and select usually scale like
		290	O(total_fds) where n is the total number of fds (or the highest fd), epoll scales
		291	either O(1) or O(active_fds).
152		292
153	=item C<EVMETHOD_PORT> (solaris 10 only)	293	While stopping and starting an I/O watcher in the same iteration will
		294	result in some caching, there is still a syscall per such incident
		295	(because the fd could point to a different file description now), so its
		296	best to avoid that. Also, dup()ed file descriptors might not work very
		297	well if you register events for both fds.
		298
		299	Please note that epoll sometimes generates spurious notifications, so you
		300	need to use non-blocking I/O or other means to avoid blocking when no data
		301	(or space) is available.
		302
		303	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
		304
		305	Kqueue deserves special mention, as at the time of this writing, it
		306	was broken on all BSDs except NetBSD (usually it doesn't work with
		307	anything but sockets and pipes, except on Darwin, where of course its
		308	completely useless). For this reason its not being "autodetected"
		309	unless you explicitly specify it explicitly in the flags (i.e. using
		310	C<EVBACKEND_KQUEUE>).
		311
		312	It scales in the same way as the epoll backend, but the interface to the
		313	kernel is more efficient (which says nothing about its actual speed, of
		314	course). While starting and stopping an I/O watcher does not cause an
		315	extra syscall as with epoll, it still adds up to four event changes per
		316	incident, so its best to avoid that.
		317
		318	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)
		319
		320	This is not implemented yet (and might never be).
		321
		322	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
		323
		324	This uses the Solaris 10 port mechanism. As with everything on Solaris,
		325	it's really slow, but it still scales very well (O(active_fds)).
		326
		327	Please note that solaris ports can result in a lot of spurious
		328	notifications, so you need to use non-blocking I/O or other means to avoid
		329	blocking when no data (or space) is available.
		330
		331	=item C<EVBACKEND_ALL>
		332
		333	Try all backends (even potentially broken ones that wouldn't be tried
		334	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
		335	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
		336
		337	=back
154		338
155	If one or more of these are ored into the flags value, then only these	339	If one or more of these are ored into the flags value, then only these
156	backends will be tried (in the reverse order as given here). If one are	340	backends will be tried (in the reverse order as given here). If none are
157	specified, any backend will do.	341	specified, most compiled-in backend will be tried, usually in reverse
		342	order of their flag values :)
158		343
159	=back	344	The most typical usage is like this:
		345
		346	if (!ev_default_loop (0))
		347	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		348
		349	Restrict libev to the select and poll backends, and do not allow
		350	environment settings to be taken into account:
		351
		352	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
		353
		354	Use whatever libev has to offer, but make sure that kqueue is used if
		355	available (warning, breaks stuff, best use only with your own private
		356	event loop and only if you know the OS supports your types of fds):
		357
		358	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
160		359
161	=item struct ev_loop *ev_loop_new (unsigned int flags)	360	=item struct ev_loop *ev_loop_new (unsigned int flags)
162		361
163	Similar to C<ev_default_loop>, but always creates a new event loop that is	362	Similar to C<ev_default_loop>, but always creates a new event loop that is
164	always distinct from the default loop. Unlike the default loop, it cannot	363	always distinct from the default loop. Unlike the default loop, it cannot
165	handle signal and child watchers, and attempts to do so will be greeted by	364	handle signal and child watchers, and attempts to do so will be greeted by
166	undefined behaviour (or a failed assertion if assertions are enabled).	365	undefined behaviour (or a failed assertion if assertions are enabled).
167		366
		367	Example: Try to create a event loop that uses epoll and nothing else.
		368
		369	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
		370	if (!epoller)
		371	fatal ("no epoll found here, maybe it hides under your chair");
		372
168	=item ev_default_destroy ()	373	=item ev_default_destroy ()
169		374
170	Destroys the default loop again (frees all memory and kernel state	375	Destroys the default loop again (frees all memory and kernel state
171	etc.). This stops all registered event watchers (by not touching them in	376	etc.). None of the active event watchers will be stopped in the normal
172	any way whatsoever, although you cannot rely on this :).	377	sense, so e.g. C<ev_is_active> might still return true. It is your
		378	responsibility to either stop all watchers cleanly yoursef I<before>
		379	calling this function, or cope with the fact afterwards (which is usually
		380	the easiest thing, youc na just ignore the watchers and/or C<free ()> them
		381	for example).
173		382
174	=item ev_loop_destroy (loop)	383	=item ev_loop_destroy (loop)
175		384
176	Like C<ev_default_destroy>, but destroys an event loop created by an	385	Like C<ev_default_destroy>, but destroys an event loop created by an
177	earlier call to C<ev_loop_new>.	386	earlier call to C<ev_loop_new>.
…		…
181	This function reinitialises the kernel state for backends that have	390	This function reinitialises the kernel state for backends that have
182	one. Despite the name, you can call it anytime, but it makes most sense	391	one. Despite the name, you can call it anytime, but it makes most sense
183	after forking, in either the parent or child process (or both, but that	392	after forking, in either the parent or child process (or both, but that
184	again makes little sense).	393	again makes little sense).
185		394
186	You I<must> call this function after forking if and only if you want to	395	You I<must> call this function in the child process after forking if and
187	use the event library in both processes. If you just fork+exec, you don't	396	only if you want to use the event library in both processes. If you just
188	have to call it.	397	fork+exec, you don't have to call it.
189		398
190	The function itself is quite fast and it's usually not a problem to call	399	The function itself is quite fast and it's usually not a problem to call
191	it just in case after a fork. To make this easy, the function will fit in	400	it just in case after a fork. To make this easy, the function will fit in
192	quite nicely into a call to C<pthread_atfork>:	401	quite nicely into a call to C<pthread_atfork>:
193		402
194	pthread_atfork (0, 0, ev_default_fork);	403	pthread_atfork (0, 0, ev_default_fork);
195		404
		405	At the moment, C<EVBACKEND_SELECT> and C<EVBACKEND_POLL> are safe to use
		406	without calling this function, so if you force one of those backends you
		407	do not need to care.
		408
196	=item ev_loop_fork (loop)	409	=item ev_loop_fork (loop)
197		410
198	Like C<ev_default_fork>, but acts on an event loop created by	411	Like C<ev_default_fork>, but acts on an event loop created by
199	C<ev_loop_new>. Yes, you have to call this on every allocated event loop	412	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
200	after fork, and how you do this is entirely your own problem.	413	after fork, and how you do this is entirely your own problem.
201		414
202	=item unsigned int ev_method (loop)	415	=item unsigned int ev_backend (loop)
203		416
204	Returns one of the C<EVMETHOD_*> flags indicating the event backend in	417	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
205	use.	418	use.
206		419
207	=item ev_tstamp ev_now (loop)	420	=item ev_tstamp ev_now (loop)
208		421
209	Returns the current "event loop time", which is the time the event loop	422	Returns the current "event loop time", which is the time the event loop
210	got events and started processing them. This timestamp does not change	423	received events and started processing them. This timestamp does not
211	as long as callbacks are being processed, and this is also the base time	424	change as long as callbacks are being processed, and this is also the base
212	used for relative timers. You can treat it as the timestamp of the event	425	time used for relative timers. You can treat it as the timestamp of the
213	occuring (or more correctly, the mainloop finding out about it).	426	event occuring (or more correctly, libev finding out about it).
214		427
215	=item ev_loop (loop, int flags)	428	=item ev_loop (loop, int flags)
216		429
217	Finally, this is it, the event handler. This function usually is called	430	Finally, this is it, the event handler. This function usually is called
218	after you initialised all your watchers and you want to start handling	431	after you initialised all your watchers and you want to start handling
219	events.	432	events.
220		433
221	If the flags argument is specified as 0, it will not return until either	434	If the flags argument is specified as C<0>, it will not return until
222	no event watchers are active anymore or C<ev_unloop> was called.	435	either no event watchers are active anymore or C<ev_unloop> was called.
		436
		437	Please note that an explicit C<ev_unloop> is usually better than
		438	relying on all watchers to be stopped when deciding when a program has
		439	finished (especially in interactive programs), but having a program that
		440	automatically loops as long as it has to and no longer by virtue of
		441	relying on its watchers stopping correctly is a thing of beauty.
223		442
224	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle	443	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle
225	those events and any outstanding ones, but will not block your process in	444	those events and any outstanding ones, but will not block your process in
226	case there are no events and will return after one iteration of the loop.	445	case there are no events and will return after one iteration of the loop.
227		446
228	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if	447	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if
229	neccessary) and will handle those and any outstanding ones. It will block	448	neccessary) and will handle those and any outstanding ones. It will block
230	your process until at least one new event arrives, and will return after	449	your process until at least one new event arrives, and will return after
231	one iteration of the loop.	450	one iteration of the loop. This is useful if you are waiting for some
		451	external event in conjunction with something not expressible using other
		452	libev watchers. However, a pair of C<ev_prepare>/C<ev_check> watchers is
		453	usually a better approach for this kind of thing.
232		454
233	This flags value could be used to implement alternative looping	455	Here are the gory details of what C<ev_loop> does:
234	constructs, but the C<prepare> and C<check> watchers provide a better and	456
235	more generic mechanism.	457	* If there are no active watchers (reference count is zero), return.
		458	- Queue prepare watchers and then call all outstanding watchers.
		459	- If we have been forked, recreate the kernel state.
		460	- Update the kernel state with all outstanding changes.
		461	- Update the "event loop time".
		462	- Calculate for how long to block.
		463	- Block the process, waiting for any events.
		464	- Queue all outstanding I/O (fd) events.
		465	- Update the "event loop time" and do time jump handling.
		466	- Queue all outstanding timers.
		467	- Queue all outstanding periodics.
		468	- If no events are pending now, queue all idle watchers.
		469	- Queue all check watchers.
		470	- Call all queued watchers in reverse order (i.e. check watchers first).
		471	Signals and child watchers are implemented as I/O watchers, and will
		472	be handled here by queueing them when their watcher gets executed.
		473	- If ev_unloop has been called or EVLOOP_ONESHOT or EVLOOP_NONBLOCK
		474	were used, return, otherwise continue with step *.
		475
		476	Example: Queue some jobs and then loop until no events are outsanding
		477	anymore.
		478
		479	... queue jobs here, make sure they register event watchers as long
		480	... as they still have work to do (even an idle watcher will do..)
		481	ev_loop (my_loop, 0);
		482	... jobs done. yeah!
236		483
237	=item ev_unloop (loop, how)	484	=item ev_unloop (loop, how)
238		485
239	Can be used to make a call to C<ev_loop> return early (but only after it	486	Can be used to make a call to C<ev_loop> return early (but only after it
240	has processed all outstanding events). The C<how> argument must be either	487	has processed all outstanding events). The C<how> argument must be either
241	C<EVUNLOOP_ONCE>, which will make the innermost C<ev_loop> call return, or	488	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or
242	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	489	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.
243		490
244	=item ev_ref (loop)	491	=item ev_ref (loop)
245		492
246	=item ev_unref (loop)	493	=item ev_unref (loop)
…		…
254	visible to the libev user and should not keep C<ev_loop> from exiting if	501	visible to the libev user and should not keep C<ev_loop> from exiting if
255	no event watchers registered by it are active. It is also an excellent	502	no event watchers registered by it are active. It is also an excellent
256	way to do this for generic recurring timers or from within third-party	503	way to do this for generic recurring timers or from within third-party
257	libraries. Just remember to I<unref after start> and I<ref before stop>.	504	libraries. Just remember to I<unref after start> and I<ref before stop>.
258		505
		506	Example: Create a signal watcher, but keep it from keeping C<ev_loop>
		507	running when nothing else is active.
		508
		509	struct ev_signal exitsig;
		510	ev_signal_init (&exitsig, sig_cb, SIGINT);
		511	ev_signal_start (loop, &exitsig);
		512	evf_unref (loop);
		513
		514	Example: For some weird reason, unregister the above signal handler again.
		515
		516	ev_ref (loop);
		517	ev_signal_stop (loop, &exitsig);
		518
259	=back	519	=back
		520
260		521
261	=head1 ANATOMY OF A WATCHER	522	=head1 ANATOMY OF A WATCHER
262		523
263	A watcher is a structure that you create and register to record your	524	A watcher is a structure that you create and register to record your
264	interest in some event. For instance, if you want to wait for STDIN to	525	interest in some event. For instance, if you want to wait for STDIN to
…		…
297	*) >>), and you can stop watching for events at any time by calling the	558	*) >>), and you can stop watching for events at any time by calling the
298	corresponding stop function (C<< ev_<type>_stop (loop, watcher *) >>.	559	corresponding stop function (C<< ev_<type>_stop (loop, watcher *) >>.
299		560
300	As long as your watcher is active (has been started but not stopped) you	561	As long as your watcher is active (has been started but not stopped) you
301	must not touch the values stored in it. Most specifically you must never	562	must not touch the values stored in it. Most specifically you must never
302	reinitialise it or call its set method.	563	reinitialise it or call its C<set> macro.
303
304	You can check whether an event is active by calling the C<ev_is_active
305	(watcher *)> macro. To see whether an event is outstanding (but the
306	callback for it has not been called yet) you can use the C<ev_is_pending
307	(watcher *)> macro.
308		564
309	Each and every callback receives the event loop pointer as first, the	565	Each and every callback receives the event loop pointer as first, the
310	registered watcher structure as second, and a bitset of received events as	566	registered watcher structure as second, and a bitset of received events as
311	third argument.	567	third argument.
312		568
…		…
336	The signal specified in the C<ev_signal> watcher has been received by a thread.	592	The signal specified in the C<ev_signal> watcher has been received by a thread.
337		593
338	=item C<EV_CHILD>	594	=item C<EV_CHILD>
339		595
340	The pid specified in the C<ev_child> watcher has received a status change.	596	The pid specified in the C<ev_child> watcher has received a status change.
		597
		598	=item C<EV_STAT>
		599
		600	The path specified in the C<ev_stat> watcher changed its attributes somehow.
341		601
342	=item C<EV_IDLE>	602	=item C<EV_IDLE>
343		603
344	The C<ev_idle> watcher has determined that you have nothing better to do.	604	The C<ev_idle> watcher has determined that you have nothing better to do.
345		605
…		…
353	received events. Callbacks of both watcher types can start and stop as	613	received events. Callbacks of both watcher types can start and stop as
354	many watchers as they want, and all of them will be taken into account	614	many watchers as they want, and all of them will be taken into account
355	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	615	(for example, a C<ev_prepare> watcher might start an idle watcher to keep
356	C<ev_loop> from blocking).	616	C<ev_loop> from blocking).
357		617
		618	=item C<EV_EMBED>
		619
		620	The embedded event loop specified in the C<ev_embed> watcher needs attention.
		621
		622	=item C<EV_FORK>
		623
		624	The event loop has been resumed in the child process after fork (see
		625	C<ev_fork>).
		626
358	=item C<EV_ERROR>	627	=item C<EV_ERROR>
359		628
360	An unspecified error has occured, the watcher has been stopped. This might	629	An unspecified error has occured, the watcher has been stopped. This might
361	happen because the watcher could not be properly started because libev	630	happen because the watcher could not be properly started because libev
362	ran out of memory, a file descriptor was found to be closed or any other	631	ran out of memory, a file descriptor was found to be closed or any other
…		…
368	your callbacks is well-written it can just attempt the operation and cope	637	your callbacks is well-written it can just attempt the operation and cope
369	with the error from read() or write(). This will not work in multithreaded	638	with the error from read() or write(). This will not work in multithreaded
370	programs, though, so beware.	639	programs, though, so beware.
371		640
372	=back	641	=back
		642
		643	=head2 GENERIC WATCHER FUNCTIONS
		644
		645	In the following description, C<TYPE> stands for the watcher type,
		646	e.g. C<timer> for C<ev_timer> watchers and C<io> for C<ev_io> watchers.
		647
		648	=over 4
		649
		650	=item C<ev_init> (ev_TYPE *watcher, callback)
		651
		652	This macro initialises the generic portion of a watcher. The contents
		653	of the watcher object can be arbitrary (so C<malloc> will do). Only
		654	the generic parts of the watcher are initialised, you I<need> to call
		655	the type-specific C<ev_TYPE_set> macro afterwards to initialise the
		656	type-specific parts. For each type there is also a C<ev_TYPE_init> macro
		657	which rolls both calls into one.
		658
		659	You can reinitialise a watcher at any time as long as it has been stopped
		660	(or never started) and there are no pending events outstanding.
		661
		662	The callback is always of type C<void (*)(ev_loop *loop, ev_TYPE *watcher,
		663	int revents)>.
		664
		665	=item C<ev_TYPE_set> (ev_TYPE *, [args])
		666
		667	This macro initialises the type-specific parts of a watcher. You need to
		668	call C<ev_init> at least once before you call this macro, but you can
		669	call C<ev_TYPE_set> any number of times. You must not, however, call this
		670	macro on a watcher that is active (it can be pending, however, which is a
		671	difference to the C<ev_init> macro).
		672
		673	Although some watcher types do not have type-specific arguments
		674	(e.g. C<ev_prepare>) you still need to call its C<set> macro.
		675
		676	=item C<ev_TYPE_init> (ev_TYPE *watcher, callback, [args])
		677
		678	This convinience macro rolls both C<ev_init> and C<ev_TYPE_set> macro
		679	calls into a single call. This is the most convinient method to initialise
		680	a watcher. The same limitations apply, of course.
		681
		682	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)
		683
		684	Starts (activates) the given watcher. Only active watchers will receive
		685	events. If the watcher is already active nothing will happen.
		686
		687	=item C<ev_TYPE_stop> (loop *, ev_TYPE *watcher)
		688
		689	Stops the given watcher again (if active) and clears the pending
		690	status. It is possible that stopped watchers are pending (for example,
		691	non-repeating timers are being stopped when they become pending), but
		692	C<ev_TYPE_stop> ensures that the watcher is neither active nor pending. If
		693	you want to free or reuse the memory used by the watcher it is therefore a
		694	good idea to always call its C<ev_TYPE_stop> function.
		695
		696	=item bool ev_is_active (ev_TYPE *watcher)
		697
		698	Returns a true value iff the watcher is active (i.e. it has been started
		699	and not yet been stopped). As long as a watcher is active you must not modify
		700	it.
		701
		702	=item bool ev_is_pending (ev_TYPE *watcher)
		703
		704	Returns a true value iff the watcher is pending, (i.e. it has outstanding
		705	events but its callback has not yet been invoked). As long as a watcher
		706	is pending (but not active) you must not call an init function on it (but
		707	C<ev_TYPE_set> is safe) and you must make sure the watcher is available to
		708	libev (e.g. you cnanot C<free ()> it).
		709
		710	=item callback ev_cb (ev_TYPE *watcher)
		711
		712	Returns the callback currently set on the watcher.
		713
		714	=item ev_cb_set (ev_TYPE *watcher, callback)
		715
		716	Change the callback. You can change the callback at virtually any time
		717	(modulo threads).
		718
		719	=back
		720
373		721
374	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	722	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
375		723
376	Each watcher has, by default, a member C<void *data> that you can change	724	Each watcher has, by default, a member C<void *data> that you can change
377	and read at any time, libev will completely ignore it. This can be used	725	and read at any time, libev will completely ignore it. This can be used
…		…
395	{	743	{
396	struct my_io *w = (struct my_io *)w_;	744	struct my_io *w = (struct my_io *)w_;
397	...	745	...
398	}	746	}
399		747
400	More interesting and less C-conformant ways of catsing your callback type	748	More interesting and less C-conformant ways of casting your callback type
401	have been omitted....	749	instead have been omitted.
		750
		751	Another common scenario is having some data structure with multiple
		752	watchers:
		753
		754	struct my_biggy
		755	{
		756	int some_data;
		757	ev_timer t1;
		758	ev_timer t2;
		759	}
		760
		761	In this case getting the pointer to C<my_biggy> is a bit more complicated,
		762	you need to use C<offsetof>:
		763
		764	#include <stddef.h>
		765
		766	static void
		767	t1_cb (EV_P_ struct ev_timer *w, int revents)
		768	{
		769	struct my_biggy big = (struct my_biggy *
		770	(((char *)w) - offsetof (struct my_biggy, t1));
		771	}
		772
		773	static void
		774	t2_cb (EV_P_ struct ev_timer *w, int revents)
		775	{
		776	struct my_biggy big = (struct my_biggy *
		777	(((char *)w) - offsetof (struct my_biggy, t2));
		778	}
402		779
403		780
404	=head1 WATCHER TYPES	781	=head1 WATCHER TYPES
405		782
406	This section describes each watcher in detail, but will not repeat	783	This section describes each watcher in detail, but will not repeat
407	information given in the last section.	784	information given in the last section. Any initialisation/set macros,
		785	functions and members specific to the watcher type are explained.
408		786
		787	Members are additionally marked with either I<[read-only]>, meaning that,
		788	while the watcher is active, you can look at the member and expect some
		789	sensible content, but you must not modify it (you can modify it while the
		790	watcher is stopped to your hearts content), or I<[read-write]>, which
		791	means you can expect it to have some sensible content while the watcher
		792	is active, but you can also modify it. Modifying it may not do something
		793	sensible or take immediate effect (or do anything at all), but libev will
		794	not crash or malfunction in any way.
		795
		796
409	=head2 C<ev_io> - is this file descriptor readable or writable	797	=head2 C<ev_io> - is this file descriptor readable or writable?
410		798
411	I/O watchers check whether a file descriptor is readable or writable	799	I/O watchers check whether a file descriptor is readable or writable
412	in each iteration of the event loop (This behaviour is called	800	in each iteration of the event loop, or, more precisely, when reading
413	level-triggering because you keep receiving events as long as the	801	would not block the process and writing would at least be able to write
414	condition persists. Remember you can stop the watcher if you don't want to	802	some data. This behaviour is called level-triggering because you keep
415	act on the event and neither want to receive future events).	803	receiving events as long as the condition persists. Remember you can stop
		804	the watcher if you don't want to act on the event and neither want to
		805	receive future events.
416		806
417	In general you can register as many read and/or write event watchers oer	807	In general you can register as many read and/or write event watchers per
418	fd as you want (as long as you don't confuse yourself). Setting all file	808	fd as you want (as long as you don't confuse yourself). Setting all file
419	descriptors to non-blocking mode is also usually a good idea (but not	809	descriptors to non-blocking mode is also usually a good idea (but not
420	required if you know what you are doing).	810	required if you know what you are doing).
421		811
422	You have to be careful with dup'ed file descriptors, though. Some backends	812	You have to be careful with dup'ed file descriptors, though. Some backends
423	(the linux epoll backend is a notable example) cannot handle dup'ed file	813	(the linux epoll backend is a notable example) cannot handle dup'ed file
424	descriptors correctly if you register interest in two or more fds pointing	814	descriptors correctly if you register interest in two or more fds pointing
425	to the same file/socket etc. description.	815	to the same underlying file/socket/etc. description (that is, they share
		816	the same underlying "file open").
426		817
427	If you must do this, then force the use of a known-to-be-good backend	818	If you must do this, then force the use of a known-to-be-good backend
428	(at the time of this writing, this includes only EVMETHOD_SELECT and	819	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and
429	EVMETHOD_POLL).	820	C<EVBACKEND_POLL>).
		821
		822	Another thing you have to watch out for is that it is quite easy to
		823	receive "spurious" readyness notifications, that is your callback might
		824	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
		825	because there is no data. Not only are some backends known to create a
		826	lot of those (for example solaris ports), it is very easy to get into
		827	this situation even with a relatively standard program structure. Thus
		828	it is best to always use non-blocking I/O: An extra C<read>(2) returning
		829	C<EAGAIN> is far preferable to a program hanging until some data arrives.
		830
		831	If you cannot run the fd in non-blocking mode (for example you should not
		832	play around with an Xlib connection), then you have to seperately re-test
		833	wether a file descriptor is really ready with a known-to-be good interface
		834	such as poll (fortunately in our Xlib example, Xlib already does this on
		835	its own, so its quite safe to use).
430		836
431	=over 4	837	=over 4
432		838
433	=item ev_io_init (ev_io *, callback, int fd, int events)	839	=item ev_io_init (ev_io *, callback, int fd, int events)
434		840
435	=item ev_io_set (ev_io *, int fd, int events)	841	=item ev_io_set (ev_io *, int fd, int events)
436		842
437	Configures an C<ev_io> watcher. The fd is the file descriptor to rceeive	843	Configures an C<ev_io> watcher. The C<fd> is the file descriptor to
438	events for and events is either C<EV_READ>, C<EV_WRITE> or C<EV_READ |	844	rceeive events for and events is either C<EV_READ>, C<EV_WRITE> or
439	EV_WRITE> to receive the given events.	845	C<EV_READ | EV_WRITE> to receive the given events.
		846
		847	=item int fd [read-only]
		848
		849	The file descriptor being watched.
		850
		851	=item int events [read-only]
		852
		853	The events being watched.
440		854
441	=back	855	=back
442		856
		857	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well
		858	readable, but only once. Since it is likely line-buffered, you could
		859	attempt to read a whole line in the callback.
		860
		861	static void
		862	stdin_readable_cb (struct ev_loop *loop, struct ev_io *w, int revents)
		863	{
		864	ev_io_stop (loop, w);
		865	.. read from stdin here (or from w->fd) and haqndle any I/O errors
		866	}
		867
		868	...
		869	struct ev_loop *loop = ev_default_init (0);
		870	struct ev_io stdin_readable;
		871	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
		872	ev_io_start (loop, &stdin_readable);
		873	ev_loop (loop, 0);
		874
		875
443	=head2 C<ev_timer> - relative and optionally recurring timeouts	876	=head2 C<ev_timer> - relative and optionally repeating timeouts
444		877
445	Timer watchers are simple relative timers that generate an event after a	878	Timer watchers are simple relative timers that generate an event after a
446	given time, and optionally repeating in regular intervals after that.	879	given time, and optionally repeating in regular intervals after that.
447		880
448	The timers are based on real time, that is, if you register an event that	881	The timers are based on real time, that is, if you register an event that
449	times out after an hour and youreset your system clock to last years	882	times out after an hour and you reset your system clock to last years
450	time, it will still time out after (roughly) and hour. "Roughly" because	883	time, it will still time out after (roughly) and hour. "Roughly" because
451	detecting time jumps is hard, and soem inaccuracies are unavoidable (the	884	detecting time jumps is hard, and some inaccuracies are unavoidable (the
452	monotonic clock option helps a lot here).	885	monotonic clock option helps a lot here).
453		886
454	The relative timeouts are calculated relative to the C<ev_now ()>	887	The relative timeouts are calculated relative to the C<ev_now ()>
455	time. This is usually the right thing as this timestamp refers to the time	888	time. This is usually the right thing as this timestamp refers to the time
456	of the event triggering whatever timeout you are modifying/starting. If	889	of the event triggering whatever timeout you are modifying/starting. If
457	you suspect event processing to be delayed and you *need* to base the timeout	890	you suspect event processing to be delayed and you I<need> to base the timeout
458	ion the current time, use something like this to adjust for this:	891	on the current time, use something like this to adjust for this:
459		892
460	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);	893	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);
		894
		895	The callback is guarenteed to be invoked only when its timeout has passed,
		896	but if multiple timers become ready during the same loop iteration then
		897	order of execution is undefined.
461		898
462	=over 4	899	=over 4
463		900
464	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	901	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
465		902
…		…
471	later, again, and again, until stopped manually.	908	later, again, and again, until stopped manually.
472		909
473	The timer itself will do a best-effort at avoiding drift, that is, if you	910	The timer itself will do a best-effort at avoiding drift, that is, if you
474	configure a timer to trigger every 10 seconds, then it will trigger at	911	configure a timer to trigger every 10 seconds, then it will trigger at
475	exactly 10 second intervals. If, however, your program cannot keep up with	912	exactly 10 second intervals. If, however, your program cannot keep up with
476	the timer (ecause it takes longer than those 10 seconds to do stuff) the	913	the timer (because it takes longer than those 10 seconds to do stuff) the
477	timer will not fire more than once per event loop iteration.	914	timer will not fire more than once per event loop iteration.
478		915
479	=item ev_timer_again (loop)	916	=item ev_timer_again (loop)
480		917
481	This will act as if the timer timed out and restart it again if it is	918	This will act as if the timer timed out and restart it again if it is
…		…
485		922
486	If the timer is repeating, either start it if necessary (with the repeat	923	If the timer is repeating, either start it if necessary (with the repeat
487	value), or reset the running timer to the repeat value.	924	value), or reset the running timer to the repeat value.
488		925
489	This sounds a bit complicated, but here is a useful and typical	926	This sounds a bit complicated, but here is a useful and typical
490	example: Imagine you have a tcp connection and you want a so-called idle	927	example: Imagine you have a tcp connection and you want a so-called
491	timeout, that is, you want to be called when there have been, say, 60	928	idle timeout, that is, you want to be called when there have been,
492	seconds of inactivity on the socket. The easiest way to do this is to	929	say, 60 seconds of inactivity on the socket. The easiest way to do
493	configure an C<ev_timer> with after=repeat=60 and calling ev_timer_again each	930	this is to configure an C<ev_timer> with C<after>=C<repeat>=C<60> and calling
494	time you successfully read or write some data. If you go into an idle	931	C<ev_timer_again> each time you successfully read or write some data. If
495	state where you do not expect data to travel on the socket, you can stop	932	you go into an idle state where you do not expect data to travel on the
496	the timer, and again will automatically restart it if need be.	933	socket, you can stop the timer, and again will automatically restart it if
		934	need be.
		935
		936	You can also ignore the C<after> value and C<ev_timer_start> altogether
		937	and only ever use the C<repeat> value:
		938
		939	ev_timer_init (timer, callback, 0., 5.);
		940	ev_timer_again (loop, timer);
		941	...
		942	timer->again = 17.;
		943	ev_timer_again (loop, timer);
		944	...
		945	timer->again = 10.;
		946	ev_timer_again (loop, timer);
		947
		948	This is more efficient then stopping/starting the timer eahc time you want
		949	to modify its timeout value.
		950
		951	=item ev_tstamp repeat [read-write]
		952
		953	The current C<repeat> value. Will be used each time the watcher times out
		954	or C<ev_timer_again> is called and determines the next timeout (if any),
		955	which is also when any modifications are taken into account.
497		956
498	=back	957	=back
499		958
		959	Example: Create a timer that fires after 60 seconds.
		960
		961	static void
		962	one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)
		963	{
		964	.. one minute over, w is actually stopped right here
		965	}
		966
		967	struct ev_timer mytimer;
		968	ev_timer_init (&mytimer, one_minute_cb, 60., 0.);
		969	ev_timer_start (loop, &mytimer);
		970
		971	Example: Create a timeout timer that times out after 10 seconds of
		972	inactivity.
		973
		974	static void
		975	timeout_cb (struct ev_loop *loop, struct ev_timer *w, int revents)
		976	{
		977	.. ten seconds without any activity
		978	}
		979
		980	struct ev_timer mytimer;
		981	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
		982	ev_timer_again (&mytimer); /* start timer */
		983	ev_loop (loop, 0);
		984
		985	// and in some piece of code that gets executed on any "activity":
		986	// reset the timeout to start ticking again at 10 seconds
		987	ev_timer_again (&mytimer);
		988
		989
500	=head2 C<ev_periodic> - to cron or not to cron	990	=head2 C<ev_periodic> - to cron or not to cron?
501		991
502	Periodic watchers are also timers of a kind, but they are very versatile	992	Periodic watchers are also timers of a kind, but they are very versatile
503	(and unfortunately a bit complex).	993	(and unfortunately a bit complex).
504		994
505	Unlike C<ev_timer>'s, they are not based on real time (or relative time)	995	Unlike C<ev_timer>'s, they are not based on real time (or relative time)
506	but on wallclock time (absolute time). You can tell a periodic watcher	996	but on wallclock time (absolute time). You can tell a periodic watcher
507	to trigger "at" some specific point in time. For example, if you tell a	997	to trigger "at" some specific point in time. For example, if you tell a
508	periodic watcher to trigger in 10 seconds (by specifiying e.g. c<ev_now ()	998	periodic watcher to trigger in 10 seconds (by specifiying e.g. C<ev_now ()
509	+ 10.>) and then reset your system clock to the last year, then it will	999	+ 10.>) and then reset your system clock to the last year, then it will
510	take a year to trigger the event (unlike an C<ev_timer>, which would trigger	1000	take a year to trigger the event (unlike an C<ev_timer>, which would trigger
511	roughly 10 seconds later and of course not if you reset your system time	1001	roughly 10 seconds later and of course not if you reset your system time
512	again).	1002	again).
513		1003
514	They can also be used to implement vastly more complex timers, such as	1004	They can also be used to implement vastly more complex timers, such as
515	triggering an event on eahc midnight, local time.	1005	triggering an event on eahc midnight, local time.
516		1006
		1007	As with timers, the callback is guarenteed to be invoked only when the
		1008	time (C<at>) has been passed, but if multiple periodic timers become ready
		1009	during the same loop iteration then order of execution is undefined.
		1010
517	=over 4	1011	=over 4
518		1012
519	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)	1013	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)
520		1014
521	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)	1015	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)
522		1016
523	Lots of arguments, lets sort it out... There are basically three modes of	1017	Lots of arguments, lets sort it out... There are basically three modes of
524	operation, and we will explain them from simplest to complex:	1018	operation, and we will explain them from simplest to complex:
525
526		1019
527	=over 4	1020	=over 4
528		1021
529	=item * absolute timer (interval = reschedule_cb = 0)	1022	=item * absolute timer (interval = reschedule_cb = 0)
530		1023
…		…
558	In this mode the values for C<interval> and C<at> are both being	1051	In this mode the values for C<interval> and C<at> are both being
559	ignored. Instead, each time the periodic watcher gets scheduled, the	1052	ignored. Instead, each time the periodic watcher gets scheduled, the
560	reschedule callback will be called with the watcher as first, and the	1053	reschedule callback will be called with the watcher as first, and the
561	current time as second argument.	1054	current time as second argument.
562		1055
563	NOTE: I<This callback MUST NOT stop or destroy the periodic or any other	1056	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,
564	periodic watcher, ever, or make any event loop modifications>. If you need	1057	ever, or make any event loop modifications>. If you need to stop it,
565	to stop it, return C<now + 1e30> (or so, fudge fudge) and stop it afterwards.	1058	return C<now + 1e30> (or so, fudge fudge) and stop it afterwards (e.g. by
566		1059	starting a prepare watcher).
567	Also, I<< this callback must always return a time that is later than the
568	passed C<now> value >>. Not even C<now> itself will be ok.
569		1060
570	Its prototype is C<ev_tstamp (*reschedule_cb)(struct ev_periodic *w,	1061	Its prototype is C<ev_tstamp (*reschedule_cb)(struct ev_periodic *w,
571	ev_tstamp now)>, e.g.:	1062	ev_tstamp now)>, e.g.:
572		1063
573	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)	1064	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)
…		…
578	It must return the next time to trigger, based on the passed time value	1069	It must return the next time to trigger, based on the passed time value
579	(that is, the lowest time value larger than to the second argument). It	1070	(that is, the lowest time value larger than to the second argument). It
580	will usually be called just before the callback will be triggered, but	1071	will usually be called just before the callback will be triggered, but
581	might be called at other times, too.	1072	might be called at other times, too.
582		1073
		1074	NOTE: I<< This callback must always return a time that is later than the
		1075	passed C<now> value >>. Not even C<now> itself will do, it I<must> be larger.
		1076
583	This can be used to create very complex timers, such as a timer that	1077	This can be used to create very complex timers, such as a timer that
584	triggers on each midnight, local time. To do this, you would calculate the	1078	triggers on each midnight, local time. To do this, you would calculate the
585	next midnight after C<now> and return the timestamp value for this. How you do this	1079	next midnight after C<now> and return the timestamp value for this. How
586	is, again, up to you (but it is not trivial).	1080	you do this is, again, up to you (but it is not trivial, which is the main
		1081	reason I omitted it as an example).
587		1082
588	=back	1083	=back
589		1084
590	=item ev_periodic_again (loop, ev_periodic *)	1085	=item ev_periodic_again (loop, ev_periodic *)
591		1086
592	Simply stops and restarts the periodic watcher again. This is only useful	1087	Simply stops and restarts the periodic watcher again. This is only useful
593	when you changed some parameters or the reschedule callback would return	1088	when you changed some parameters or the reschedule callback would return
594	a different time than the last time it was called (e.g. in a crond like	1089	a different time than the last time it was called (e.g. in a crond like
595	program when the crontabs have changed).	1090	program when the crontabs have changed).
596		1091
		1092	=item ev_tstamp interval [read-write]
		1093
		1094	The current interval value. Can be modified any time, but changes only
		1095	take effect when the periodic timer fires or C<ev_periodic_again> is being
		1096	called.
		1097
		1098	=item ev_tstamp (*reschedule_cb)(struct ev_periodic *w, ev_tstamp now) [read-write]
		1099
		1100	The current reschedule callback, or C<0>, if this functionality is
		1101	switched off. Can be changed any time, but changes only take effect when
		1102	the periodic timer fires or C<ev_periodic_again> is being called.
		1103
597	=back	1104	=back
598		1105
		1106	Example: Call a callback every hour, or, more precisely, whenever the
		1107	system clock is divisible by 3600. The callback invocation times have
		1108	potentially a lot of jittering, but good long-term stability.
		1109
		1110	static void
		1111	clock_cb (struct ev_loop *loop, struct ev_io *w, int revents)
		1112	{
		1113	... its now a full hour (UTC, or TAI or whatever your clock follows)
		1114	}
		1115
		1116	struct ev_periodic hourly_tick;
		1117	ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);
		1118	ev_periodic_start (loop, &hourly_tick);
		1119
		1120	Example: The same as above, but use a reschedule callback to do it:
		1121
		1122	#include <math.h>
		1123
		1124	static ev_tstamp
		1125	my_scheduler_cb (struct ev_periodic *w, ev_tstamp now)
		1126	{
		1127	return fmod (now, 3600.) + 3600.;
		1128	}
		1129
		1130	ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);
		1131
		1132	Example: Call a callback every hour, starting now:
		1133
		1134	struct ev_periodic hourly_tick;
		1135	ev_periodic_init (&hourly_tick, clock_cb,
		1136	fmod (ev_now (loop), 3600.), 3600., 0);
		1137	ev_periodic_start (loop, &hourly_tick);
		1138
		1139
599	=head2 C<ev_signal> - signal me when a signal gets signalled	1140	=head2 C<ev_signal> - signal me when a signal gets signalled!
600		1141
601	Signal watchers will trigger an event when the process receives a specific	1142	Signal watchers will trigger an event when the process receives a specific
602	signal one or more times. Even though signals are very asynchronous, libev	1143	signal one or more times. Even though signals are very asynchronous, libev
603	will try it's best to deliver signals synchronously, i.e. as part of the	1144	will try it's best to deliver signals synchronously, i.e. as part of the
604	normal event processing, like any other event.	1145	normal event processing, like any other event.
…		…
617	=item ev_signal_set (ev_signal *, int signum)	1158	=item ev_signal_set (ev_signal *, int signum)
618		1159
619	Configures the watcher to trigger on the given signal number (usually one	1160	Configures the watcher to trigger on the given signal number (usually one
620	of the C<SIGxxx> constants).	1161	of the C<SIGxxx> constants).
621		1162
		1163	=item int signum [read-only]
		1164
		1165	The signal the watcher watches out for.
		1166
622	=back	1167	=back
623		1168
		1169
624	=head2 C<ev_child> - wait for pid status changes	1170	=head2 C<ev_child> - watch out for process status changes
625		1171
626	Child watchers trigger when your process receives a SIGCHLD in response to	1172	Child watchers trigger when your process receives a SIGCHLD in response to
627	some child status changes (most typically when a child of yours dies).	1173	some child status changes (most typically when a child of yours dies).
628		1174
629	=over 4	1175	=over 4
…		…
637	at the C<rstatus> member of the C<ev_child> watcher structure to see	1183	at the C<rstatus> member of the C<ev_child> watcher structure to see
638	the status word (use the macros from C<sys/wait.h> and see your systems	1184	the status word (use the macros from C<sys/wait.h> and see your systems
639	C<waitpid> documentation). The C<rpid> member contains the pid of the	1185	C<waitpid> documentation). The C<rpid> member contains the pid of the
640	process causing the status change.	1186	process causing the status change.
641		1187
		1188	=item int pid [read-only]
		1189
		1190	The process id this watcher watches out for, or C<0>, meaning any process id.
		1191
		1192	=item int rpid [read-write]
		1193
		1194	The process id that detected a status change.
		1195
		1196	=item int rstatus [read-write]
		1197
		1198	The process exit/trace status caused by C<rpid> (see your systems
		1199	C<waitpid> and C<sys/wait.h> documentation for details).
		1200
642	=back	1201	=back
643		1202
		1203	Example: Try to exit cleanly on SIGINT and SIGTERM.
		1204
		1205	static void
		1206	sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)
		1207	{
		1208	ev_unloop (loop, EVUNLOOP_ALL);
		1209	}
		1210
		1211	struct ev_signal signal_watcher;
		1212	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
		1213	ev_signal_start (loop, &sigint_cb);
		1214
		1215
		1216	=head2 C<ev_stat> - did the file attributes just change?
		1217
		1218	This watches a filesystem path for attribute changes. That is, it calls
		1219	C<stat> regularly (or when the OS says it changed) and sees if it changed
		1220	compared to the last time, invoking the callback if it did.
		1221
		1222	The path does not need to exist: changing from "path exists" to "path does
		1223	not exist" is a status change like any other. The condition "path does
		1224	not exist" is signified by the C<st_nlink> field being zero (which is
		1225	otherwise always forced to be at least one) and all the other fields of
		1226	the stat buffer having unspecified contents.
		1227
		1228	Since there is no standard to do this, the portable implementation simply
		1229	calls C<stat (2)> regularly on the path to see if it changed somehow. You
		1230	can specify a recommended polling interval for this case. If you specify
		1231	a polling interval of C<0> (highly recommended!) then a I<suitable,
		1232	unspecified default> value will be used (which you can expect to be around
		1233	five seconds, although this might change dynamically). Libev will also
		1234	impose a minimum interval which is currently around C<0.1>, but thats
		1235	usually overkill.
		1236
		1237	This watcher type is not meant for massive numbers of stat watchers,
		1238	as even with OS-supported change notifications, this can be
		1239	resource-intensive.
		1240
		1241	At the time of this writing, only the Linux inotify interface is
		1242	implemented (implementing kqueue support is left as an exercise for the
		1243	reader). Inotify will be used to give hints only and should not change the
		1244	semantics of C<ev_stat> watchers, which means that libev sometimes needs
		1245	to fall back to regular polling again even with inotify, but changes are
		1246	usually detected immediately, and if the file exists there will be no
		1247	polling.
		1248
		1249	=over 4
		1250
		1251	=item ev_stat_init (ev_stat *, callback, const char *path, ev_tstamp interval)
		1252
		1253	=item ev_stat_set (ev_stat *, const char *path, ev_tstamp interval)
		1254
		1255	Configures the watcher to wait for status changes of the given
		1256	C<path>. The C<interval> is a hint on how quickly a change is expected to
		1257	be detected and should normally be specified as C<0> to let libev choose
		1258	a suitable value. The memory pointed to by C<path> must point to the same
		1259	path for as long as the watcher is active.
		1260
		1261	The callback will be receive C<EV_STAT> when a change was detected,
		1262	relative to the attributes at the time the watcher was started (or the
		1263	last change was detected).
		1264
		1265	=item ev_stat_stat (ev_stat *)
		1266
		1267	Updates the stat buffer immediately with new values. If you change the
		1268	watched path in your callback, you could call this fucntion to avoid
		1269	detecting this change (while introducing a race condition). Can also be
		1270	useful simply to find out the new values.
		1271
		1272	=item ev_statdata attr [read-only]
		1273
		1274	The most-recently detected attributes of the file. Although the type is of
		1275	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types
		1276	suitable for your system. If the C<st_nlink> member is C<0>, then there
		1277	was some error while C<stat>ing the file.
		1278
		1279	=item ev_statdata prev [read-only]
		1280
		1281	The previous attributes of the file. The callback gets invoked whenever
		1282	C<prev> != C<attr>.
		1283
		1284	=item ev_tstamp interval [read-only]
		1285
		1286	The specified interval.
		1287
		1288	=item const char *path [read-only]
		1289
		1290	The filesystem path that is being watched.
		1291
		1292	=back
		1293
		1294	Example: Watch C</etc/passwd> for attribute changes.
		1295
		1296	static void
		1297	passwd_cb (struct ev_loop *loop, ev_stat *w, int revents)
		1298	{
		1299	/* /etc/passwd changed in some way */
		1300	if (w->attr.st_nlink)
		1301	{
		1302	printf ("passwd current size %ld\n", (long)w->attr.st_size);
		1303	printf ("passwd current atime %ld\n", (long)w->attr.st_mtime);
		1304	printf ("passwd current mtime %ld\n", (long)w->attr.st_mtime);
		1305	}
		1306	else
		1307	/* you shalt not abuse printf for puts */
		1308	puts ("wow, /etc/passwd is not there, expect problems. "
		1309	"if this is windows, they already arrived\n");
		1310	}
		1311
		1312	...
		1313	ev_stat passwd;
		1314
		1315	ev_stat_init (&passwd, passwd_cb, "/etc/passwd");
		1316	ev_stat_start (loop, &passwd);
		1317
		1318
644	=head2 C<ev_idle> - when you've got nothing better to do	1319	=head2 C<ev_idle> - when you've got nothing better to do...
645		1320
646	Idle watchers trigger events when there are no other events are pending	1321	Idle watchers trigger events when there are no other events are pending
647	(prepare, check and other idle watchers do not count). That is, as long	1322	(prepare, check and other idle watchers do not count). That is, as long
648	as your process is busy handling sockets or timeouts (or even signals,	1323	as your process is busy handling sockets or timeouts (or even signals,
649	imagine) it will not be triggered. But when your process is idle all idle	1324	imagine) it will not be triggered. But when your process is idle all idle
…		…
667	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,	1342	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,
668	believe me.	1343	believe me.
669		1344
670	=back	1345	=back
671		1346
		1347	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the
		1348	callback, free it. Also, use no error checking, as usual.
		1349
		1350	static void
		1351	idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)
		1352	{
		1353	free (w);
		1354	// now do something you wanted to do when the program has
		1355	// no longer asnything immediate to do.
		1356	}
		1357
		1358	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));
		1359	ev_idle_init (idle_watcher, idle_cb);
		1360	ev_idle_start (loop, idle_cb);
		1361
		1362
672	=head2 C<ev_prepare> and C<ev_check> - customise your event loop	1363	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!
673		1364
674	Prepare and check watchers are usually (but not always) used in tandem:	1365	Prepare and check watchers are usually (but not always) used in tandem:
675	Prepare watchers get invoked before the process blocks and check watchers	1366	prepare watchers get invoked before the process blocks and check watchers
676	afterwards.	1367	afterwards.
677		1368
		1369	You I<must not> call C<ev_loop> or similar functions that enter
		1370	the current event loop from either C<ev_prepare> or C<ev_check>
		1371	watchers. Other loops than the current one are fine, however. The
		1372	rationale behind this is that you do not need to check for recursion in
		1373	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,
		1374	C<ev_check> so if you have one watcher of each kind they will always be
		1375	called in pairs bracketing the blocking call.
		1376
678	Their main purpose is to integrate other event mechanisms into libev. This	1377	Their main purpose is to integrate other event mechanisms into libev and
679	could be used, for example, to track variable changes, implement your own	1378	their use is somewhat advanced. This could be used, for example, to track
680	watchers, integrate net-snmp or a coroutine library and lots more.	1379	variable changes, implement your own watchers, integrate net-snmp or a
		1380	coroutine library and lots more. They are also occasionally useful if
		1381	you cache some data and want to flush it before blocking (for example,
		1382	in X programs you might want to do an C<XFlush ()> in an C<ev_prepare>
		1383	watcher).
681		1384
682	This is done by examining in each prepare call which file descriptors need	1385	This is done by examining in each prepare call which file descriptors need
683	to be watched by the other library, registering C<ev_io> watchers for	1386	to be watched by the other library, registering C<ev_io> watchers for
684	them and starting an C<ev_timer> watcher for any timeouts (many libraries	1387	them and starting an C<ev_timer> watcher for any timeouts (many libraries
685	provide just this functionality). Then, in the check watcher you check for	1388	provide just this functionality). Then, in the check watcher you check for
686	any events that occured (by checking the pending status of all watchers	1389	any events that occured (by checking the pending status of all watchers
687	and stopping them) and call back into the library. The I/O and timer	1390	and stopping them) and call back into the library. The I/O and timer
688	callbacks will never actually be called (but must be valid neverthelles,	1391	callbacks will never actually be called (but must be valid nevertheless,
689	because you never know, you know?).	1392	because you never know, you know?).
690		1393
691	As another example, the Perl Coro module uses these hooks to integrate	1394	As another example, the Perl Coro module uses these hooks to integrate
692	coroutines into libev programs, by yielding to other active coroutines	1395	coroutines into libev programs, by yielding to other active coroutines
693	during each prepare and only letting the process block if no coroutines	1396	during each prepare and only letting the process block if no coroutines
694	are ready to run (its actually more complicated, it only runs coroutines	1397	are ready to run (it's actually more complicated: it only runs coroutines
695	with priority higher than the event loop and one lower priority once,	1398	with priority higher than or equal to the event loop and one coroutine
696	using idle watchers to keep the event loop from blocking if lower-priority	1399	of lower priority, but only once, using idle watchers to keep the event
697	coroutines exist, thus mapping low-priority coroutines to idle/background	1400	loop from blocking if lower-priority coroutines are active, thus mapping
698	tasks).	1401	low-priority coroutines to idle/background tasks).
699		1402
700	=over 4	1403	=over 4
701		1404
702	=item ev_prepare_init (ev_prepare *, callback)	1405	=item ev_prepare_init (ev_prepare *, callback)
703		1406
…		…
707	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>	1410	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>
708	macros, but using them is utterly, utterly and completely pointless.	1411	macros, but using them is utterly, utterly and completely pointless.
709		1412
710	=back	1413	=back
711		1414
		1415	Example: To include a library such as adns, you would add IO watchers
		1416	and a timeout watcher in a prepare handler, as required by libadns, and
		1417	in a check watcher, destroy them and call into libadns. What follows is
		1418	pseudo-code only of course:
		1419
		1420	static ev_io iow [nfd];
		1421	static ev_timer tw;
		1422
		1423	static void
		1424	io_cb (ev_loop *loop, ev_io *w, int revents)
		1425	{
		1426	// set the relevant poll flags
		1427	// could also call adns_processreadable etc. here
		1428	struct pollfd *fd = (struct pollfd *)w->data;
		1429	if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;
		1430	if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;
		1431	}
		1432
		1433	// create io watchers for each fd and a timer before blocking
		1434	static void
		1435	adns_prepare_cb (ev_loop *loop, ev_prepare *w, int revents)
		1436	{
		1437	int timeout = 3600000;truct pollfd fds [nfd];
		1438	// actual code will need to loop here and realloc etc.
		1439	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
		1440
		1441	/* the callback is illegal, but won't be called as we stop during check */
		1442	ev_timer_init (&tw, 0, timeout * 1e-3);
		1443	ev_timer_start (loop, &tw);
		1444
		1445	// create on ev_io per pollfd
		1446	for (int i = 0; i < nfd; ++i)
		1447	{
		1448	ev_io_init (iow + i, io_cb, fds [i].fd,
		1449	((fds [i].events & POLLIN ? EV_READ : 0)
		1450	| (fds [i].events & POLLOUT ? EV_WRITE : 0)));
		1451
		1452	fds [i].revents = 0;
		1453	iow [i].data = fds + i;
		1454	ev_io_start (loop, iow + i);
		1455	}
		1456	}
		1457
		1458	// stop all watchers after blocking
		1459	static void
		1460	adns_check_cb (ev_loop *loop, ev_check *w, int revents)
		1461	{
		1462	ev_timer_stop (loop, &tw);
		1463
		1464	for (int i = 0; i < nfd; ++i)
		1465	ev_io_stop (loop, iow + i);
		1466
		1467	adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));
		1468	}
		1469
		1470
		1471	=head2 C<ev_embed> - when one backend isn't enough...
		1472
		1473	This is a rather advanced watcher type that lets you embed one event loop
		1474	into another (currently only C<ev_io> events are supported in the embedded
		1475	loop, other types of watchers might be handled in a delayed or incorrect
		1476	fashion and must not be used).
		1477
		1478	There are primarily two reasons you would want that: work around bugs and
		1479	prioritise I/O.
		1480
		1481	As an example for a bug workaround, the kqueue backend might only support
		1482	sockets on some platform, so it is unusable as generic backend, but you
		1483	still want to make use of it because you have many sockets and it scales
		1484	so nicely. In this case, you would create a kqueue-based loop and embed it
		1485	into your default loop (which might use e.g. poll). Overall operation will
		1486	be a bit slower because first libev has to poll and then call kevent, but
		1487	at least you can use both at what they are best.
		1488
		1489	As for prioritising I/O: rarely you have the case where some fds have
		1490	to be watched and handled very quickly (with low latency), and even
		1491	priorities and idle watchers might have too much overhead. In this case
		1492	you would put all the high priority stuff in one loop and all the rest in
		1493	a second one, and embed the second one in the first.
		1494
		1495	As long as the watcher is active, the callback will be invoked every time
		1496	there might be events pending in the embedded loop. The callback must then
		1497	call C<ev_embed_sweep (mainloop, watcher)> to make a single sweep and invoke
		1498	their callbacks (you could also start an idle watcher to give the embedded
		1499	loop strictly lower priority for example). You can also set the callback
		1500	to C<0>, in which case the embed watcher will automatically execute the
		1501	embedded loop sweep.
		1502
		1503	As long as the watcher is started it will automatically handle events. The
		1504	callback will be invoked whenever some events have been handled. You can
		1505	set the callback to C<0> to avoid having to specify one if you are not
		1506	interested in that.
		1507
		1508	Also, there have not currently been made special provisions for forking:
		1509	when you fork, you not only have to call C<ev_loop_fork> on both loops,
		1510	but you will also have to stop and restart any C<ev_embed> watchers
		1511	yourself.
		1512
		1513	Unfortunately, not all backends are embeddable, only the ones returned by
		1514	C<ev_embeddable_backends> are, which, unfortunately, does not include any
		1515	portable one.
		1516
		1517	So when you want to use this feature you will always have to be prepared
		1518	that you cannot get an embeddable loop. The recommended way to get around
		1519	this is to have a separate variables for your embeddable loop, try to
		1520	create it, and if that fails, use the normal loop for everything:
		1521
		1522	struct ev_loop *loop_hi = ev_default_init (0);
		1523	struct ev_loop *loop_lo = 0;
		1524	struct ev_embed embed;
		1525
		1526	// see if there is a chance of getting one that works
		1527	// (remember that a flags value of 0 means autodetection)
		1528	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()
		1529	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())
		1530	: 0;
		1531
		1532	// if we got one, then embed it, otherwise default to loop_hi
		1533	if (loop_lo)
		1534	{
		1535	ev_embed_init (&embed, 0, loop_lo);
		1536	ev_embed_start (loop_hi, &embed);
		1537	}
		1538	else
		1539	loop_lo = loop_hi;
		1540
		1541	=over 4
		1542
		1543	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
		1544
		1545	=item ev_embed_set (ev_embed *, callback, struct ev_loop *embedded_loop)
		1546
		1547	Configures the watcher to embed the given loop, which must be
		1548	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
		1549	invoked automatically, otherwise it is the responsibility of the callback
		1550	to invoke it (it will continue to be called until the sweep has been done,
		1551	if you do not want thta, you need to temporarily stop the embed watcher).
		1552
		1553	=item ev_embed_sweep (loop, ev_embed *)
		1554
		1555	Make a single, non-blocking sweep over the embedded loop. This works
		1556	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
		1557	apropriate way for embedded loops.
		1558
		1559	=item struct ev_loop *loop [read-only]
		1560
		1561	The embedded event loop.
		1562
		1563	=back
		1564
		1565
		1566	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
		1567
		1568	Fork watchers are called when a C<fork ()> was detected (usually because
		1569	whoever is a good citizen cared to tell libev about it by calling
		1570	C<ev_default_fork> or C<ev_loop_fork>). The invocation is done before the
		1571	event loop blocks next and before C<ev_check> watchers are being called,
		1572	and only in the child after the fork. If whoever good citizen calling
		1573	C<ev_default_fork> cheats and calls it in the wrong process, the fork
		1574	handlers will be invoked, too, of course.
		1575
		1576	=over 4
		1577
		1578	=item ev_fork_init (ev_signal *, callback)
		1579
		1580	Initialises and configures the fork watcher - it has no parameters of any
		1581	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
		1582	believe me.
		1583
		1584	=back
		1585
		1586
712	=head1 OTHER FUNCTIONS	1587	=head1 OTHER FUNCTIONS
713		1588
714	There are some other functions of possible interest. Described. Here. Now.	1589	There are some other functions of possible interest. Described. Here. Now.
715		1590
716	=over 4	1591	=over 4
…		…
718	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback)	1593	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback)
719		1594
720	This function combines a simple timer and an I/O watcher, calls your	1595	This function combines a simple timer and an I/O watcher, calls your
721	callback on whichever event happens first and automatically stop both	1596	callback on whichever event happens first and automatically stop both
722	watchers. This is useful if you want to wait for a single event on an fd	1597	watchers. This is useful if you want to wait for a single event on an fd
723	or timeout without havign to allocate/configure/start/stop/free one or	1598	or timeout without having to allocate/configure/start/stop/free one or
724	more watchers yourself.	1599	more watchers yourself.
725		1600
726	If C<fd> is less than 0, then no I/O watcher will be started and events	1601	If C<fd> is less than 0, then no I/O watcher will be started and events
727	is being ignored. Otherwise, an C<ev_io> watcher for the given C<fd> and	1602	is being ignored. Otherwise, an C<ev_io> watcher for the given C<fd> and
728	C<events> set will be craeted and started.	1603	C<events> set will be craeted and started.
…		…
731	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and	1606	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
732	repeat = 0) will be started. While C<0> is a valid timeout, it is of	1607	repeat = 0) will be started. While C<0> is a valid timeout, it is of
733	dubious value.	1608	dubious value.
734		1609
735	The callback has the type C<void (*cb)(int revents, void *arg)> and gets	1610	The callback has the type C<void (*cb)(int revents, void *arg)> and gets
736	passed an events set like normal event callbacks (with a combination of	1611	passed an C<revents> set like normal event callbacks (a combination of
737	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>	1612	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>
738	value passed to C<ev_once>:	1613	value passed to C<ev_once>:
739		1614
740	static void stdin_ready (int revents, void *arg)	1615	static void stdin_ready (int revents, void *arg)
741	{	1616	{
…		…
745	/* stdin might have data for us, joy! */;	1620	/* stdin might have data for us, joy! */;
746	}	1621	}
747		1622
748	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	1623	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
749		1624
750	=item ev_feed_event (loop, watcher, int events)	1625	=item ev_feed_event (ev_loop *, watcher *, int revents)
751		1626
752	Feeds the given event set into the event loop, as if the specified event	1627	Feeds the given event set into the event loop, as if the specified event
753	had happened for the specified watcher (which must be a pointer to an	1628	had happened for the specified watcher (which must be a pointer to an
754	initialised but not necessarily started event watcher).	1629	initialised but not necessarily started event watcher).
755		1630
756	=item ev_feed_fd_event (loop, int fd, int revents)	1631	=item ev_feed_fd_event (ev_loop *, int fd, int revents)
757		1632
758	Feed an event on the given fd, as if a file descriptor backend detected	1633	Feed an event on the given fd, as if a file descriptor backend detected
759	the given events it.	1634	the given events it.
760		1635
761	=item ev_feed_signal_event (loop, int signum)	1636	=item ev_feed_signal_event (ev_loop *loop, int signum)
762		1637
763	Feed an event as if the given signal occured (loop must be the default loop!).	1638	Feed an event as if the given signal occured (C<loop> must be the default
		1639	loop!).
764		1640
765	=back	1641	=back
766		1642
		1643
		1644	=head1 LIBEVENT EMULATION
		1645
		1646	Libev offers a compatibility emulation layer for libevent. It cannot
		1647	emulate the internals of libevent, so here are some usage hints:
		1648
		1649	=over 4
		1650
		1651	=item * Use it by including <event.h>, as usual.
		1652
		1653	=item * The following members are fully supported: ev_base, ev_callback,
		1654	ev_arg, ev_fd, ev_res, ev_events.
		1655
		1656	=item * Avoid using ev_flags and the EVLIST_*-macros, while it is
		1657	maintained by libev, it does not work exactly the same way as in libevent (consider
		1658	it a private API).
		1659
		1660	=item * Priorities are not currently supported. Initialising priorities
		1661	will fail and all watchers will have the same priority, even though there
		1662	is an ev_pri field.
		1663
		1664	=item * Other members are not supported.
		1665
		1666	=item * The libev emulation is I<not> ABI compatible to libevent, you need
		1667	to use the libev header file and library.
		1668
		1669	=back
		1670
		1671	=head1 C++ SUPPORT
		1672
		1673	Libev comes with some simplistic wrapper classes for C++ that mainly allow
		1674	you to use some convinience methods to start/stop watchers and also change
		1675	the callback model to a model using method callbacks on objects.
		1676
		1677	To use it,
		1678
		1679	#include <ev++.h>
		1680
		1681	(it is not installed by default). This automatically includes F<ev.h>
		1682	and puts all of its definitions (many of them macros) into the global
		1683	namespace. All C++ specific things are put into the C<ev> namespace.
		1684
		1685	It should support all the same embedding options as F<ev.h>, most notably
		1686	C<EV_MULTIPLICITY>.
		1687
		1688	Here is a list of things available in the C<ev> namespace:
		1689
		1690	=over 4
		1691
		1692	=item C<ev::READ>, C<ev::WRITE> etc.
		1693
		1694	These are just enum values with the same values as the C<EV_READ> etc.
		1695	macros from F<ev.h>.
		1696
		1697	=item C<ev::tstamp>, C<ev::now>
		1698
		1699	Aliases to the same types/functions as with the C<ev_> prefix.
		1700
		1701	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.
		1702
		1703	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of
		1704	the same name in the C<ev> namespace, with the exception of C<ev_signal>
		1705	which is called C<ev::sig> to avoid clashes with the C<signal> macro
		1706	defines by many implementations.
		1707
		1708	All of those classes have these methods:
		1709
		1710	=over 4
		1711
		1712	=item ev::TYPE::TYPE (object *, object::method *)
		1713
		1714	=item ev::TYPE::TYPE (object *, object::method *, struct ev_loop *)
		1715
		1716	=item ev::TYPE::~TYPE
		1717
		1718	The constructor takes a pointer to an object and a method pointer to
		1719	the event handler callback to call in this class. The constructor calls
		1720	C<ev_init> for you, which means you have to call the C<set> method
		1721	before starting it. If you do not specify a loop then the constructor
		1722	automatically associates the default loop with this watcher.
		1723
		1724	The destructor automatically stops the watcher if it is active.
		1725
		1726	=item w->set (struct ev_loop *)
		1727
		1728	Associates a different C<struct ev_loop> with this watcher. You can only
		1729	do this when the watcher is inactive (and not pending either).
		1730
		1731	=item w->set ([args])
		1732
		1733	Basically the same as C<ev_TYPE_set>, with the same args. Must be
		1734	called at least once. Unlike the C counterpart, an active watcher gets
		1735	automatically stopped and restarted.
		1736
		1737	=item w->start ()
		1738
		1739	Starts the watcher. Note that there is no C<loop> argument as the
		1740	constructor already takes the loop.
		1741
		1742	=item w->stop ()
		1743
		1744	Stops the watcher if it is active. Again, no C<loop> argument.
		1745
		1746	=item w->again () C<ev::timer>, C<ev::periodic> only
		1747
		1748	For C<ev::timer> and C<ev::periodic>, this invokes the corresponding
		1749	C<ev_TYPE_again> function.
		1750
		1751	=item w->sweep () C<ev::embed> only
		1752
		1753	Invokes C<ev_embed_sweep>.
		1754
		1755	=item w->update () C<ev::stat> only
		1756
		1757	Invokes C<ev_stat_stat>.
		1758
		1759	=back
		1760
		1761	=back
		1762
		1763	Example: Define a class with an IO and idle watcher, start one of them in
		1764	the constructor.
		1765
		1766	class myclass
		1767	{
		1768	ev_io io; void io_cb (ev::io &w, int revents);
		1769	ev_idle idle void idle_cb (ev::idle &w, int revents);
		1770
		1771	myclass ();
		1772	}
		1773
		1774	myclass::myclass (int fd)
		1775	: io (this, &myclass::io_cb),
		1776	idle (this, &myclass::idle_cb)
		1777	{
		1778	io.start (fd, ev::READ);
		1779	}
		1780
		1781
		1782	=head1 MACRO MAGIC
		1783
		1784	Libev can be compiled with a variety of options, the most fundemantal is
		1785	C<EV_MULTIPLICITY>. This option determines wether (most) functions and
		1786	callbacks have an initial C<struct ev_loop *> argument.
		1787
		1788	To make it easier to write programs that cope with either variant, the
		1789	following macros are defined:
		1790
		1791	=over 4
		1792
		1793	=item C<EV_A>, C<EV_A_>
		1794
		1795	This provides the loop I<argument> for functions, if one is required ("ev
		1796	loop argument"). The C<EV_A> form is used when this is the sole argument,
		1797	C<EV_A_> is used when other arguments are following. Example:
		1798
		1799	ev_unref (EV_A);
		1800	ev_timer_add (EV_A_ watcher);
		1801	ev_loop (EV_A_ 0);
		1802
		1803	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
		1804	which is often provided by the following macro.
		1805
		1806	=item C<EV_P>, C<EV_P_>
		1807
		1808	This provides the loop I<parameter> for functions, if one is required ("ev
		1809	loop parameter"). The C<EV_P> form is used when this is the sole parameter,
		1810	C<EV_P_> is used when other parameters are following. Example:
		1811
		1812	// this is how ev_unref is being declared
		1813	static void ev_unref (EV_P);
		1814
		1815	// this is how you can declare your typical callback
		1816	static void cb (EV_P_ ev_timer *w, int revents)
		1817
		1818	It declares a parameter C<loop> of type C<struct ev_loop *>, quite
		1819	suitable for use with C<EV_A>.
		1820
		1821	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
		1822
		1823	Similar to the other two macros, this gives you the value of the default
		1824	loop, if multiple loops are supported ("ev loop default").
		1825
		1826	=back
		1827
		1828	Example: Declare and initialise a check watcher, working regardless of
		1829	wether multiple loops are supported or not.
		1830
		1831	static void
		1832	check_cb (EV_P_ ev_timer *w, int revents)
		1833	{
		1834	ev_check_stop (EV_A_ w);
		1835	}
		1836
		1837	ev_check check;
		1838	ev_check_init (&check, check_cb);
		1839	ev_check_start (EV_DEFAULT_ &check);
		1840	ev_loop (EV_DEFAULT_ 0);
		1841
		1842
		1843	=head1 EMBEDDING
		1844
		1845	Libev can (and often is) directly embedded into host
		1846	applications. Examples of applications that embed it include the Deliantra
		1847	Game Server, the EV perl module, the GNU Virtual Private Ethernet (gvpe)
		1848	and rxvt-unicode.
		1849
		1850	The goal is to enable you to just copy the neecssary files into your
		1851	source directory without having to change even a single line in them, so
		1852	you can easily upgrade by simply copying (or having a checked-out copy of
		1853	libev somewhere in your source tree).
		1854
		1855	=head2 FILESETS
		1856
		1857	Depending on what features you need you need to include one or more sets of files
		1858	in your app.
		1859
		1860	=head3 CORE EVENT LOOP
		1861
		1862	To include only the libev core (all the C<ev_*> functions), with manual
		1863	configuration (no autoconf):
		1864
		1865	#define EV_STANDALONE 1
		1866	#include "ev.c"
		1867
		1868	This will automatically include F<ev.h>, too, and should be done in a
		1869	single C source file only to provide the function implementations. To use
		1870	it, do the same for F<ev.h> in all files wishing to use this API (best
		1871	done by writing a wrapper around F<ev.h> that you can include instead and
		1872	where you can put other configuration options):
		1873
		1874	#define EV_STANDALONE 1
		1875	#include "ev.h"
		1876
		1877	Both header files and implementation files can be compiled with a C++
		1878	compiler (at least, thats a stated goal, and breakage will be treated
		1879	as a bug).
		1880
		1881	You need the following files in your source tree, or in a directory
		1882	in your include path (e.g. in libev/ when using -Ilibev):
		1883
		1884	ev.h
		1885	ev.c
		1886	ev_vars.h
		1887	ev_wrap.h
		1888
		1889	ev_win32.c required on win32 platforms only
		1890
		1891	ev_select.c only when select backend is enabled (which is by default)
		1892	ev_poll.c only when poll backend is enabled (disabled by default)
		1893	ev_epoll.c only when the epoll backend is enabled (disabled by default)
		1894	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)
		1895	ev_port.c only when the solaris port backend is enabled (disabled by default)
		1896
		1897	F<ev.c> includes the backend files directly when enabled, so you only need
		1898	to compile this single file.
		1899
		1900	=head3 LIBEVENT COMPATIBILITY API
		1901
		1902	To include the libevent compatibility API, also include:
		1903
		1904	#include "event.c"
		1905
		1906	in the file including F<ev.c>, and:
		1907
		1908	#include "event.h"
		1909
		1910	in the files that want to use the libevent API. This also includes F<ev.h>.
		1911
		1912	You need the following additional files for this:
		1913
		1914	event.h
		1915	event.c
		1916
		1917	=head3 AUTOCONF SUPPORT
		1918
		1919	Instead of using C<EV_STANDALONE=1> and providing your config in
		1920	whatever way you want, you can also C<m4_include([libev.m4])> in your
		1921	F<configure.ac> and leave C<EV_STANDALONE> undefined. F<ev.c> will then
		1922	include F<config.h> and configure itself accordingly.
		1923
		1924	For this of course you need the m4 file:
		1925
		1926	libev.m4
		1927
		1928	=head2 PREPROCESSOR SYMBOLS/MACROS
		1929
		1930	Libev can be configured via a variety of preprocessor symbols you have to define
		1931	before including any of its files. The default is not to build for multiplicity
		1932	and only include the select backend.
		1933
		1934	=over 4
		1935
		1936	=item EV_STANDALONE
		1937
		1938	Must always be C<1> if you do not use autoconf configuration, which
		1939	keeps libev from including F<config.h>, and it also defines dummy
		1940	implementations for some libevent functions (such as logging, which is not
		1941	supported). It will also not define any of the structs usually found in
		1942	F<event.h> that are not directly supported by the libev core alone.
		1943
		1944	=item EV_USE_MONOTONIC
		1945
		1946	If defined to be C<1>, libev will try to detect the availability of the
		1947	monotonic clock option at both compiletime and runtime. Otherwise no use
		1948	of the monotonic clock option will be attempted. If you enable this, you
		1949	usually have to link against librt or something similar. Enabling it when
		1950	the functionality isn't available is safe, though, althoguh you have
		1951	to make sure you link against any libraries where the C<clock_gettime>
		1952	function is hiding in (often F<-lrt>).
		1953
		1954	=item EV_USE_REALTIME
		1955
		1956	If defined to be C<1>, libev will try to detect the availability of the
		1957	realtime clock option at compiletime (and assume its availability at
		1958	runtime if successful). Otherwise no use of the realtime clock option will
		1959	be attempted. This effectively replaces C<gettimeofday> by C<clock_get
		1960	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See tzhe note about libraries
		1961	in the description of C<EV_USE_MONOTONIC>, though.
		1962
		1963	=item EV_USE_SELECT
		1964
		1965	If undefined or defined to be C<1>, libev will compile in support for the
		1966	C<select>(2) backend. No attempt at autodetection will be done: if no
		1967	other method takes over, select will be it. Otherwise the select backend
		1968	will not be compiled in.
		1969
		1970	=item EV_SELECT_USE_FD_SET
		1971
		1972	If defined to C<1>, then the select backend will use the system C<fd_set>
		1973	structure. This is useful if libev doesn't compile due to a missing
		1974	C<NFDBITS> or C<fd_mask> definition or it misguesses the bitset layout on
		1975	exotic systems. This usually limits the range of file descriptors to some
		1976	low limit such as 1024 or might have other limitations (winsocket only
		1977	allows 64 sockets). The C<FD_SETSIZE> macro, set before compilation, might
		1978	influence the size of the C<fd_set> used.
		1979
		1980	=item EV_SELECT_IS_WINSOCKET
		1981
		1982	When defined to C<1>, the select backend will assume that
		1983	select/socket/connect etc. don't understand file descriptors but
		1984	wants osf handles on win32 (this is the case when the select to
		1985	be used is the winsock select). This means that it will call
		1986	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
		1987	it is assumed that all these functions actually work on fds, even
		1988	on win32. Should not be defined on non-win32 platforms.
		1989
		1990	=item EV_USE_POLL
		1991
		1992	If defined to be C<1>, libev will compile in support for the C<poll>(2)
		1993	backend. Otherwise it will be enabled on non-win32 platforms. It
		1994	takes precedence over select.
		1995
		1996	=item EV_USE_EPOLL
		1997
		1998	If defined to be C<1>, libev will compile in support for the Linux
		1999	C<epoll>(7) backend. Its availability will be detected at runtime,
		2000	otherwise another method will be used as fallback. This is the
		2001	preferred backend for GNU/Linux systems.
		2002
		2003	=item EV_USE_KQUEUE
		2004
		2005	If defined to be C<1>, libev will compile in support for the BSD style
		2006	C<kqueue>(2) backend. Its actual availability will be detected at runtime,
		2007	otherwise another method will be used as fallback. This is the preferred
		2008	backend for BSD and BSD-like systems, although on most BSDs kqueue only
		2009	supports some types of fds correctly (the only platform we found that
		2010	supports ptys for example was NetBSD), so kqueue might be compiled in, but
		2011	not be used unless explicitly requested. The best way to use it is to find
		2012	out whether kqueue supports your type of fd properly and use an embedded
		2013	kqueue loop.
		2014
		2015	=item EV_USE_PORT
		2016
		2017	If defined to be C<1>, libev will compile in support for the Solaris
		2018	10 port style backend. Its availability will be detected at runtime,
		2019	otherwise another method will be used as fallback. This is the preferred
		2020	backend for Solaris 10 systems.
		2021
		2022	=item EV_USE_DEVPOLL
		2023
		2024	reserved for future expansion, works like the USE symbols above.
		2025
		2026	=item EV_USE_INOTIFY
		2027
		2028	If defined to be C<1>, libev will compile in support for the Linux inotify
		2029	interface to speed up C<ev_stat> watchers. Its actual availability will
		2030	be detected at runtime.
		2031
		2032	=item EV_H
		2033
		2034	The name of the F<ev.h> header file used to include it. The default if
		2035	undefined is C<< <ev.h> >> in F<event.h> and C<"ev.h"> in F<ev.c>. This
		2036	can be used to virtually rename the F<ev.h> header file in case of conflicts.
		2037
		2038	=item EV_CONFIG_H
		2039
		2040	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
		2041	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
		2042	C<EV_H>, above.
		2043
		2044	=item EV_EVENT_H
		2045
		2046	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
		2047	of how the F<event.h> header can be found.
		2048
		2049	=item EV_PROTOTYPES
		2050
		2051	If defined to be C<0>, then F<ev.h> will not define any function
		2052	prototypes, but still define all the structs and other symbols. This is
		2053	occasionally useful if you want to provide your own wrapper functions
		2054	around libev functions.
		2055
		2056	=item EV_MULTIPLICITY
		2057
		2058	If undefined or defined to C<1>, then all event-loop-specific functions
		2059	will have the C<struct ev_loop *> as first argument, and you can create
		2060	additional independent event loops. Otherwise there will be no support
		2061	for multiple event loops and there is no first event loop pointer
		2062	argument. Instead, all functions act on the single default loop.
		2063
		2064	=item EV_PERIODIC_ENABLE
		2065
		2066	If undefined or defined to be C<1>, then periodic timers are supported. If
		2067	defined to be C<0>, then they are not. Disabling them saves a few kB of
		2068	code.
		2069
		2070	=item EV_EMBED_ENABLE
		2071
		2072	If undefined or defined to be C<1>, then embed watchers are supported. If
		2073	defined to be C<0>, then they are not.
		2074
		2075	=item EV_STAT_ENABLE
		2076
		2077	If undefined or defined to be C<1>, then stat watchers are supported. If
		2078	defined to be C<0>, then they are not.
		2079
		2080	=item EV_FORK_ENABLE
		2081
		2082	If undefined or defined to be C<1>, then fork watchers are supported. If
		2083	defined to be C<0>, then they are not.
		2084
		2085	=item EV_MINIMAL
		2086
		2087	If you need to shave off some kilobytes of code at the expense of some
		2088	speed, define this symbol to C<1>. Currently only used for gcc to override
		2089	some inlining decisions, saves roughly 30% codesize of amd64.
		2090
		2091	=item EV_PID_HASHSIZE
		2092
		2093	C<ev_child> watchers use a small hash table to distribute workload by
		2094	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more
		2095	than enough. If you need to manage thousands of children you might want to
		2096	increase this value (I<must> be a power of two).
		2097
		2098	=item EV_INOTIFY_HASHSIZE
		2099
		2100	C<ev_staz> watchers use a small hash table to distribute workload by
		2101	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),
		2102	usually more than enough. If you need to manage thousands of C<ev_stat>
		2103	watchers you might want to increase this value (I<must> be a power of
		2104	two).
		2105
		2106	=item EV_COMMON
		2107
		2108	By default, all watchers have a C<void *data> member. By redefining
		2109	this macro to a something else you can include more and other types of
		2110	members. You have to define it each time you include one of the files,
		2111	though, and it must be identical each time.
		2112
		2113	For example, the perl EV module uses something like this:
		2114
		2115	#define EV_COMMON \
		2116	SV *self; /* contains this struct */ \
		2117	SV *cb_sv, *fh /* note no trailing ";" */
		2118
		2119	=item EV_CB_DECLARE (type)
		2120
		2121	=item EV_CB_INVOKE (watcher, revents)
		2122
		2123	=item ev_set_cb (ev, cb)
		2124
		2125	Can be used to change the callback member declaration in each watcher,
		2126	and the way callbacks are invoked and set. Must expand to a struct member
		2127	definition and a statement, respectively. See the F<ev.v> header file for
		2128	their default definitions. One possible use for overriding these is to
		2129	avoid the C<struct ev_loop *> as first argument in all cases, or to use
		2130	method calls instead of plain function calls in C++.
		2131
		2132	=head2 EXAMPLES
		2133
		2134	For a real-world example of a program the includes libev
		2135	verbatim, you can have a look at the EV perl module
		2136	(L<http://software.schmorp.de/pkg/EV.html>). It has the libev files in
		2137	the F<libev/> subdirectory and includes them in the F<EV/EVAPI.h> (public
		2138	interface) and F<EV.xs> (implementation) files. Only the F<EV.xs> file
		2139	will be compiled. It is pretty complex because it provides its own header
		2140	file.
		2141
		2142	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
		2143	that everybody includes and which overrides some autoconf choices:
		2144
		2145	#define EV_USE_POLL 0
		2146	#define EV_MULTIPLICITY 0
		2147	#define EV_PERIODICS 0
		2148	#define EV_CONFIG_H <config.h>
		2149
		2150	#include "ev++.h"
		2151
		2152	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
		2153
		2154	#include "ev_cpp.h"
		2155	#include "ev.c"
		2156
		2157
		2158	=head1 COMPLEXITIES
		2159
		2160	In this section the complexities of (many of) the algorithms used inside
		2161	libev will be explained. For complexity discussions about backends see the
		2162	documentation for C<ev_default_init>.
		2163
		2164	=over 4
		2165
		2166	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)
		2167
		2168	=item Changing timer/periodic watchers (by autorepeat, again): O(log skipped_other_timers)
		2169
		2170	=item Starting io/check/prepare/idle/signal/child watchers: O(1)
		2171
		2172	=item Stopping check/prepare/idle watchers: O(1)
		2173
		2174	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
		2175
		2176	=item Finding the next timer per loop iteration: O(1)
		2177
		2178	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
		2179
		2180	=item Activating one watcher: O(1)
		2181
		2182	=back
		2183
		2184
767	=head1 AUTHOR	2185	=head1 AUTHOR
768		2186
769	Marc Lehmann <libev@schmorp.de>.	2187	Marc Lehmann <libev@schmorp.de>.
770		2188

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines