ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.111 by root, Tue Dec 25 18:01:20 2007 UTC vs.
Revision 1.170 by root, Sat Jul 5 02:25:40 2008 UTC

…		…
2		2
3	libev - a high performance full-featured event loop written in C	3	libev - a high performance full-featured event loop written in C
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	#include <ev.h>	7	#include <ev.h>
8		8
9	=head2 EXAMPLE PROGRAM	9	=head2 EXAMPLE PROGRAM
10		10
		11	// a single header file is required
11	#include <ev.h>	12	#include <ev.h>
12		13
		14	// every watcher type has its own typedef'd struct
		15	// with the name ev_<type>
13	ev_io stdin_watcher;	16	ev_io stdin_watcher;
14	ev_timer timeout_watcher;	17	ev_timer timeout_watcher;
15		18
16	/* called when data readable on stdin */	19	// all watcher callbacks have a similar signature
		20	// this callback is called when data is readable on stdin
17	static void	21	static void
18	stdin_cb (EV_P_ struct ev_io *w, int revents)	22	stdin_cb (EV_P_ struct ev_io *w, int revents)
19	{	23	{
20	/* puts ("stdin ready"); */	24	puts ("stdin ready");
21	ev_io_stop (EV_A_ w); /* just a syntax example */	25	// for one-shot events, one must manually stop the watcher
22	ev_unloop (EV_A_ EVUNLOOP_ALL); /* leave all loop calls */	26	// with its corresponding stop function.
		27	ev_io_stop (EV_A_ w);
		28
		29	// this causes all nested ev_loop's to stop iterating
		30	ev_unloop (EV_A_ EVUNLOOP_ALL);
23	}	31	}
24		32
		33	// another callback, this time for a time-out
25	static void	34	static void
26	timeout_cb (EV_P_ struct ev_timer *w, int revents)	35	timeout_cb (EV_P_ struct ev_timer *w, int revents)
27	{	36	{
28	/* puts ("timeout"); */	37	puts ("timeout");
29	ev_unloop (EV_A_ EVUNLOOP_ONE); /* leave one loop call */	38	// this causes the innermost ev_loop to stop iterating
		39	ev_unloop (EV_A_ EVUNLOOP_ONE);
30	}	40	}
31		41
32	int	42	int
33	main (void)	43	main (void)
34	{	44	{
		45	// use the default event loop unless you have special needs
35	struct ev_loop *loop = ev_default_loop (0);	46	struct ev_loop *loop = ev_default_loop (0);
36		47
37	/* initialise an io watcher, then start it */	48	// initialise an io watcher, then start it
		49	// this one will watch for stdin to become readable
38	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	50	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
39	ev_io_start (loop, &stdin_watcher);	51	ev_io_start (loop, &stdin_watcher);
40		52
		53	// initialise a timer watcher, then start it
41	/* simple non-repeating 5.5 second timeout */	54	// simple non-repeating 5.5 second timeout
42	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	55	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
43	ev_timer_start (loop, &timeout_watcher);	56	ev_timer_start (loop, &timeout_watcher);
44		57
45	/* loop till timeout or data ready */	58	// now wait for events to arrive
46	ev_loop (loop, 0);	59	ev_loop (loop, 0);
47		60
		61	// unloop was called, so exit
48	return 0;	62	return 0;
49	}	63	}
50		64
51	=head1 DESCRIPTION	65	=head1 DESCRIPTION
52		66
53	The newest version of this document is also available as a html-formatted	67	The newest version of this document is also available as an html-formatted
54	web page you might find easier to navigate when reading it for the first	68	web page you might find easier to navigate when reading it for the first
55	time: L<http://cvs.schmorp.de/libev/ev.html>.	69	time: L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.
56		70
57	Libev is an event loop: you register interest in certain events (such as a	71	Libev is an event loop: you register interest in certain events (such as a
58	file descriptor being readable or a timeout occurring), and it will manage	72	file descriptor being readable or a timeout occurring), and it will manage
59	these event sources and provide your program with events.	73	these event sources and provide your program with events.
60		74
…		…
84	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent	98	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
85	for example).	99	for example).
86		100
87	=head2 CONVENTIONS	101	=head2 CONVENTIONS
88		102
89	Libev is very configurable. In this manual the default configuration will	103	Libev is very configurable. In this manual the default (and most common)
90	be described, which supports multiple event loops. For more info about	104	configuration will be described, which supports multiple event loops. For
91	various configuration options please have a look at B<EMBED> section in	105	more info about various configuration options please have a look at
92	this manual. If libev was configured without support for multiple event	106	B<EMBED> section in this manual. If libev was configured without support
93	loops, then all functions taking an initial argument of name C<loop>	107	for multiple event loops, then all functions taking an initial argument of
94	(which is always of type C<struct ev_loop *>) will not have this argument.	108	name C<loop> (which is always of type C<struct ev_loop *>) will not have
		109	this argument.
95		110
96	=head2 TIME REPRESENTATION	111	=head2 TIME REPRESENTATION
97		112
98	Libev represents time as a single floating point number, representing the	113	Libev represents time as a single floating point number, representing the
99	(fractional) number of seconds since the (POSIX) epoch (somewhere near	114	(fractional) number of seconds since the (POSIX) epoch (somewhere near
100	the beginning of 1970, details are complicated, don't ask). This type is	115	the beginning of 1970, details are complicated, don't ask). This type is
101	called C<ev_tstamp>, which is what you should use too. It usually aliases	116	called C<ev_tstamp>, which is what you should use too. It usually aliases
102	to the C<double> type in C, and when you need to do any calculations on	117	to the C<double> type in C, and when you need to do any calculations on
103	it, you should treat it as some floatingpoint value. Unlike the name	118	it, you should treat it as some floating point value. Unlike the name
104	component C<stamp> might indicate, it is also used for time differences	119	component C<stamp> might indicate, it is also used for time differences
105	throughout libev.	120	throughout libev.
		121
		122	=head1 ERROR HANDLING
		123
		124	Libev knows three classes of errors: operating system errors, usage errors
		125	and internal errors (bugs).
		126
		127	When libev catches an operating system error it cannot handle (for example
		128	a system call indicating a condition libev cannot fix), it calls the callback
		129	set via C<ev_set_syserr_cb>, which is supposed to fix the problem or
		130	abort. The default is to print a diagnostic message and to call C<abort
		131	()>.
		132
		133	When libev detects a usage error such as a negative timer interval, then
		134	it will print a diagnostic message and abort (via the C<assert> mechanism,
		135	so C<NDEBUG> will disable this checking): these are programming errors in
		136	the libev caller and need to be fixed there.
		137
		138	Libev also has a few internal error-checking C<assert>ions, and also has
		139	extensive consistency checking code. These do not trigger under normal
		140	circumstances, as they indicate either a bug in libev or worse.
		141
106		142
107	=head1 GLOBAL FUNCTIONS	143	=head1 GLOBAL FUNCTIONS
108		144
109	These functions can be called anytime, even before initialising the	145	These functions can be called anytime, even before initialising the
110	library in any way.	146	library in any way.
…		…
119		155
120	=item ev_sleep (ev_tstamp interval)	156	=item ev_sleep (ev_tstamp interval)
121		157
122	Sleep for the given interval: The current thread will be blocked until	158	Sleep for the given interval: The current thread will be blocked until
123	either it is interrupted or the given time interval has passed. Basically	159	either it is interrupted or the given time interval has passed. Basically
124	this is a subsecond-resolution C<sleep ()>.	160	this is a sub-second-resolution C<sleep ()>.
125		161
126	=item int ev_version_major ()	162	=item int ev_version_major ()
127		163
128	=item int ev_version_minor ()	164	=item int ev_version_minor ()
129		165
…		…
142	not a problem.	178	not a problem.
143		179
144	Example: Make sure we haven't accidentally been linked against the wrong	180	Example: Make sure we haven't accidentally been linked against the wrong
145	version.	181	version.
146		182
147	assert (("libev version mismatch",	183	assert (("libev version mismatch",
148	ev_version_major () == EV_VERSION_MAJOR	184	ev_version_major () == EV_VERSION_MAJOR
149	&& ev_version_minor () >= EV_VERSION_MINOR));	185	&& ev_version_minor () >= EV_VERSION_MINOR));
150		186
151	=item unsigned int ev_supported_backends ()	187	=item unsigned int ev_supported_backends ()
152		188
153	Return the set of all backends (i.e. their corresponding C<EV_BACKEND_*>	189	Return the set of all backends (i.e. their corresponding C<EV_BACKEND_*>
154	value) compiled into this binary of libev (independent of their	190	value) compiled into this binary of libev (independent of their
…		…
156	a description of the set values.	192	a description of the set values.
157		193
158	Example: make sure we have the epoll method, because yeah this is cool and	194	Example: make sure we have the epoll method, because yeah this is cool and
159	a must have and can we have a torrent of it please!!!11	195	a must have and can we have a torrent of it please!!!11
160		196
161	assert (("sorry, no epoll, no sex",	197	assert (("sorry, no epoll, no sex",
162	ev_supported_backends () & EVBACKEND_EPOLL));	198	ev_supported_backends () & EVBACKEND_EPOLL));
163		199
164	=item unsigned int ev_recommended_backends ()	200	=item unsigned int ev_recommended_backends ()
165		201
166	Return the set of all backends compiled into this binary of libev and also	202	Return the set of all backends compiled into this binary of libev and also
167	recommended for this platform. This set is often smaller than the one	203	recommended for this platform. This set is often smaller than the one
168	returned by C<ev_supported_backends>, as for example kqueue is broken on	204	returned by C<ev_supported_backends>, as for example kqueue is broken on
169	most BSDs and will not be autodetected unless you explicitly request it	205	most BSDs and will not be auto-detected unless you explicitly request it
170	(assuming you know what you are doing). This is the set of backends that	206	(assuming you know what you are doing). This is the set of backends that
171	libev will probe for if you specify no backends explicitly.	207	libev will probe for if you specify no backends explicitly.
172		208
173	=item unsigned int ev_embeddable_backends ()	209	=item unsigned int ev_embeddable_backends ()
174		210
…		…
181	See the description of C<ev_embed> watchers for more info.	217	See the description of C<ev_embed> watchers for more info.
182		218
183	=item ev_set_allocator (void *(*cb)(void *ptr, long size))	219	=item ev_set_allocator (void *(*cb)(void *ptr, long size))
184		220
185	Sets the allocation function to use (the prototype is similar - the	221	Sets the allocation function to use (the prototype is similar - the
186	semantics is identical - to the realloc C function). It is used to	222	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
187	allocate and free memory (no surprises here). If it returns zero when	223	used to allocate and free memory (no surprises here). If it returns zero
188	memory needs to be allocated, the library might abort or take some	224	when memory needs to be allocated (C<size != 0>), the library might abort
189	potentially destructive action. The default is your system realloc	225	or take some potentially destructive action.
190	function.	226
		227	Since some systems (at least OpenBSD and Darwin) fail to implement
		228	correct C<realloc> semantics, libev will use a wrapper around the system
		229	C<realloc> and C<free> functions by default.
191		230
192	You could override this function in high-availability programs to, say,	231	You could override this function in high-availability programs to, say,
193	free some memory if it cannot allocate memory, to use a special allocator,	232	free some memory if it cannot allocate memory, to use a special allocator,
194	or even to sleep a while and retry until some memory is available.	233	or even to sleep a while and retry until some memory is available.
195		234
196	Example: Replace the libev allocator with one that waits a bit and then	235	Example: Replace the libev allocator with one that waits a bit and then
197	retries).	236	retries (example requires a standards-compliant C<realloc>).
198		237
199	static void *	238	static void *
200	persistent_realloc (void *ptr, size_t size)	239	persistent_realloc (void *ptr, size_t size)
201	{	240	{
202	for (;;)	241	for (;;)
…		…
213	...	252	...
214	ev_set_allocator (persistent_realloc);	253	ev_set_allocator (persistent_realloc);
215		254
216	=item ev_set_syserr_cb (void (*cb)(const char *msg));	255	=item ev_set_syserr_cb (void (*cb)(const char *msg));
217		256
218	Set the callback function to call on a retryable syscall error (such	257	Set the callback function to call on a retryable system call error (such
219	as failed select, poll, epoll_wait). The message is a printable string	258	as failed select, poll, epoll_wait). The message is a printable string
220	indicating the system call or subsystem causing the problem. If this	259	indicating the system call or subsystem causing the problem. If this
221	callback is set, then libev will expect it to remedy the sitution, no	260	callback is set, then libev will expect it to remedy the situation, no
222	matter what, when it returns. That is, libev will generally retry the	261	matter what, when it returns. That is, libev will generally retry the
223	requested operation, or, if the condition doesn't go away, do bad stuff	262	requested operation, or, if the condition doesn't go away, do bad stuff
224	(such as abort).	263	(such as abort).
225		264
226	Example: This is basically the same thing that libev does internally, too.	265	Example: This is basically the same thing that libev does internally, too.
…		…
240	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	279	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP
241		280
242	An event loop is described by a C<struct ev_loop *>. The library knows two	281	An event loop is described by a C<struct ev_loop *>. The library knows two
243	types of such loops, the I<default> loop, which supports signals and child	282	types of such loops, the I<default> loop, which supports signals and child
244	events, and dynamically created loops which do not.	283	events, and dynamically created loops which do not.
245
246	If you use threads, a common model is to run the default event loop
247	in your main thread (or in a separate thread) and for each thread you
248	create, you also create another event loop. Libev itself does no locking
249	whatsoever, so if you mix calls to the same event loop in different
250	threads, make sure you lock (this is usually a bad idea, though, even if
251	done correctly, because it's hideous and inefficient).
252		284
253	=over 4	285	=over 4
254		286
255	=item struct ev_loop *ev_default_loop (unsigned int flags)	287	=item struct ev_loop *ev_default_loop (unsigned int flags)
256		288
…		…
260	flags. If that is troubling you, check C<ev_backend ()> afterwards).	292	flags. If that is troubling you, check C<ev_backend ()> afterwards).
261		293
262	If you don't know what event loop to use, use the one returned from this	294	If you don't know what event loop to use, use the one returned from this
263	function.	295	function.
264		296
		297	Note that this function is I<not> thread-safe, so if you want to use it
		298	from multiple threads, you have to lock (note also that this is unlikely,
		299	as loops cannot bes hared easily between threads anyway).
		300
		301	The default loop is the only loop that can handle C<ev_signal> and
		302	C<ev_child> watchers, and to do this, it always registers a handler
		303	for C<SIGCHLD>. If this is a problem for your application you can either
		304	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you
		305	can simply overwrite the C<SIGCHLD> signal handler I<after> calling
		306	C<ev_default_init>.
		307
265	The flags argument can be used to specify special behaviour or specific	308	The flags argument can be used to specify special behaviour or specific
266	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	309	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
267		310
268	The following flags are supported:	311	The following flags are supported:
269		312
…		…
274	The default flags value. Use this if you have no clue (it's the right	317	The default flags value. Use this if you have no clue (it's the right
275	thing, believe me).	318	thing, believe me).
276		319
277	=item C<EVFLAG_NOENV>	320	=item C<EVFLAG_NOENV>
278		321
279	If this flag bit is ored into the flag value (or the program runs setuid	322	If this flag bit is or'ed into the flag value (or the program runs setuid
280	or setgid) then libev will I<not> look at the environment variable	323	or setgid) then libev will I<not> look at the environment variable
281	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will	324	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will
282	override the flags completely if it is found in the environment. This is	325	override the flags completely if it is found in the environment. This is
283	useful to try out specific backends to test their performance, or to work	326	useful to try out specific backends to test their performance, or to work
284	around bugs.	327	around bugs.
…		…
290	enabling this flag.	333	enabling this flag.
291		334
292	This works by calling C<getpid ()> on every iteration of the loop,	335	This works by calling C<getpid ()> on every iteration of the loop,
293	and thus this might slow down your event loop if you do a lot of loop	336	and thus this might slow down your event loop if you do a lot of loop
294	iterations and little real work, but is usually not noticeable (on my	337	iterations and little real work, but is usually not noticeable (on my
295	Linux system for example, C<getpid> is actually a simple 5-insn sequence	338	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence
296	without a syscall and thus I<very> fast, but my Linux system also has	339	without a system call and thus I<very> fast, but my GNU/Linux system also has
297	C<pthread_atfork> which is even faster).	340	C<pthread_atfork> which is even faster).
298		341
299	The big advantage of this flag is that you can forget about fork (and	342	The big advantage of this flag is that you can forget about fork (and
300	forget about forgetting to tell libev about forking) when you use this	343	forget about forgetting to tell libev about forking) when you use this
301	flag.	344	flag.
302		345
303	This flag setting cannot be overriden or specified in the C<LIBEV_FLAGS>	346	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>
304	environment variable.	347	environment variable.
305		348
306	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	349	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
307		350
308	This is your standard select(2) backend. Not I<completely> standard, as	351	This is your standard select(2) backend. Not I<completely> standard, as
…		…
310	but if that fails, expect a fairly low limit on the number of fds when	353	but if that fails, expect a fairly low limit on the number of fds when
311	using this backend. It doesn't scale too well (O(highest_fd)), but its	354	using this backend. It doesn't scale too well (O(highest_fd)), but its
312	usually the fastest backend for a low number of (low-numbered :) fds.	355	usually the fastest backend for a low number of (low-numbered :) fds.
313		356
314	To get good performance out of this backend you need a high amount of	357	To get good performance out of this backend you need a high amount of
315	parallelity (most of the file descriptors should be busy). If you are	358	parallelism (most of the file descriptors should be busy). If you are
316	writing a server, you should C<accept ()> in a loop to accept as many	359	writing a server, you should C<accept ()> in a loop to accept as many
317	connections as possible during one iteration. You might also want to have	360	connections as possible during one iteration. You might also want to have
318	a look at C<ev_set_io_collect_interval ()> to increase the amount of	361	a look at C<ev_set_io_collect_interval ()> to increase the amount of
319	readyness notifications you get per iteration.	362	readiness notifications you get per iteration.
320		363
321	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)	364	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)
322		365
323	And this is your standard poll(2) backend. It's more complicated	366	And this is your standard poll(2) backend. It's more complicated
324	than select, but handles sparse fds better and has no artificial	367	than select, but handles sparse fds better and has no artificial
…		…
332	For few fds, this backend is a bit little slower than poll and select,	375	For few fds, this backend is a bit little slower than poll and select,
333	but it scales phenomenally better. While poll and select usually scale	376	but it scales phenomenally better. While poll and select usually scale
334	like O(total_fds) where n is the total number of fds (or the highest fd),	377	like O(total_fds) where n is the total number of fds (or the highest fd),
335	epoll scales either O(1) or O(active_fds). The epoll design has a number	378	epoll scales either O(1) or O(active_fds). The epoll design has a number
336	of shortcomings, such as silently dropping events in some hard-to-detect	379	of shortcomings, such as silently dropping events in some hard-to-detect
337	cases and rewiring a syscall per fd change, no fork support and bad	380	cases and requiring a system call per fd change, no fork support and bad
338	support for dup.	381	support for dup.
339		382
340	While stopping, setting and starting an I/O watcher in the same iteration	383	While stopping, setting and starting an I/O watcher in the same iteration
341	will result in some caching, there is still a syscall per such incident	384	will result in some caching, there is still a system call per such incident
342	(because the fd could point to a different file description now), so its	385	(because the fd could point to a different file description now), so its
343	best to avoid that. Also, C<dup ()>'ed file descriptors might not work	386	best to avoid that. Also, C<dup ()>'ed file descriptors might not work
344	very well if you register events for both fds.	387	very well if you register events for both fds.
345		388
346	Please note that epoll sometimes generates spurious notifications, so you	389	Please note that epoll sometimes generates spurious notifications, so you
…		…
349		392
350	Best performance from this backend is achieved by not unregistering all	393	Best performance from this backend is achieved by not unregistering all
351	watchers for a file descriptor until it has been closed, if possible, i.e.	394	watchers for a file descriptor until it has been closed, if possible, i.e.
352	keep at least one watcher active per fd at all times.	395	keep at least one watcher active per fd at all times.
353		396
354	While nominally embeddeble in other event loops, this feature is broken in	397	While nominally embeddable in other event loops, this feature is broken in
355	all kernel versions tested so far.	398	all kernel versions tested so far.
356		399
357	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	400	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
358		401
359	Kqueue deserves special mention, as at the time of this writing, it	402	Kqueue deserves special mention, as at the time of this writing, it
360	was broken on all BSDs except NetBSD (usually it doesn't work reliably	403	was broken on all BSDs except NetBSD (usually it doesn't work reliably
361	with anything but sockets and pipes, except on Darwin, where of course	404	with anything but sockets and pipes, except on Darwin, where of course
362	it's completely useless). For this reason it's not being "autodetected"	405	it's completely useless). For this reason it's not being "auto-detected"
363	unless you explicitly specify it explicitly in the flags (i.e. using	406	unless you explicitly specify it explicitly in the flags (i.e. using
364	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)	407	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)
365	system like NetBSD.	408	system like NetBSD.
366		409
367	You still can embed kqueue into a normal poll or select backend and use it	410	You still can embed kqueue into a normal poll or select backend and use it
…		…
369	the target platform). See C<ev_embed> watchers for more info.	412	the target platform). See C<ev_embed> watchers for more info.
370		413
371	It scales in the same way as the epoll backend, but the interface to the	414	It scales in the same way as the epoll backend, but the interface to the
372	kernel is more efficient (which says nothing about its actual speed, of	415	kernel is more efficient (which says nothing about its actual speed, of
373	course). While stopping, setting and starting an I/O watcher does never	416	course). While stopping, setting and starting an I/O watcher does never
374	cause an extra syscall as with C<EVBACKEND_EPOLL>, it still adds up to	417	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to
375	two event changes per incident, support for C<fork ()> is very bad and it	418	two event changes per incident, support for C<fork ()> is very bad and it
376	drops fds silently in similarly hard-to-detect cases.	419	drops fds silently in similarly hard-to-detect cases.
377		420
378	This backend usually performs well under most conditions.	421	This backend usually performs well under most conditions.
379		422
…		…
394	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	437	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
395		438
396	This uses the Solaris 10 event port mechanism. As with everything on Solaris,	439	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
397	it's really slow, but it still scales very well (O(active_fds)).	440	it's really slow, but it still scales very well (O(active_fds)).
398		441
399	Please note that solaris event ports can deliver a lot of spurious	442	Please note that Solaris event ports can deliver a lot of spurious
400	notifications, so you need to use non-blocking I/O or other means to avoid	443	notifications, so you need to use non-blocking I/O or other means to avoid
401	blocking when no data (or space) is available.	444	blocking when no data (or space) is available.
402		445
403	While this backend scales well, it requires one system call per active	446	While this backend scales well, it requires one system call per active
404	file descriptor per loop iteration. For small and medium numbers of file	447	file descriptor per loop iteration. For small and medium numbers of file
405	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend	448	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
406	might perform better.	449	might perform better.
407		450
		451	On the positive side, ignoring the spurious readiness notifications, this
		452	backend actually performed to specification in all tests and is fully
		453	embeddable, which is a rare feat among the OS-specific backends.
		454
408	=item C<EVBACKEND_ALL>	455	=item C<EVBACKEND_ALL>
409		456
410	Try all backends (even potentially broken ones that wouldn't be tried	457	Try all backends (even potentially broken ones that wouldn't be tried
411	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	458	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
412	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	459	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
413		460
414	It is definitely not recommended to use this flag.	461	It is definitely not recommended to use this flag.
415		462
416	=back	463	=back
417		464
418	If one or more of these are ored into the flags value, then only these	465	If one or more of these are or'ed into the flags value, then only these
419	backends will be tried (in the reverse order as given here). If none are	466	backends will be tried (in the reverse order as listed here). If none are
420	specified, most compiled-in backend will be tried, usually in reverse	467	specified, all backends in C<ev_recommended_backends ()> will be tried.
421	order of their flag values :)
422		468
423	The most typical usage is like this:	469	The most typical usage is like this:
424		470
425	if (!ev_default_loop (0))	471	if (!ev_default_loop (0))
426	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");	472	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
427		473
428	Restrict libev to the select and poll backends, and do not allow	474	Restrict libev to the select and poll backends, and do not allow
429	environment settings to be taken into account:	475	environment settings to be taken into account:
430		476
431	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);	477	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
432		478
433	Use whatever libev has to offer, but make sure that kqueue is used if	479	Use whatever libev has to offer, but make sure that kqueue is used if
434	available (warning, breaks stuff, best use only with your own private	480	available (warning, breaks stuff, best use only with your own private
435	event loop and only if you know the OS supports your types of fds):	481	event loop and only if you know the OS supports your types of fds):
436		482
437	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);	483	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
438		484
439	=item struct ev_loop *ev_loop_new (unsigned int flags)	485	=item struct ev_loop *ev_loop_new (unsigned int flags)
440		486
441	Similar to C<ev_default_loop>, but always creates a new event loop that is	487	Similar to C<ev_default_loop>, but always creates a new event loop that is
442	always distinct from the default loop. Unlike the default loop, it cannot	488	always distinct from the default loop. Unlike the default loop, it cannot
443	handle signal and child watchers, and attempts to do so will be greeted by	489	handle signal and child watchers, and attempts to do so will be greeted by
444	undefined behaviour (or a failed assertion if assertions are enabled).	490	undefined behaviour (or a failed assertion if assertions are enabled).
445		491
		492	Note that this function I<is> thread-safe, and the recommended way to use
		493	libev with threads is indeed to create one loop per thread, and using the
		494	default loop in the "main" or "initial" thread.
		495
446	Example: Try to create a event loop that uses epoll and nothing else.	496	Example: Try to create a event loop that uses epoll and nothing else.
447		497
448	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	498	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
449	if (!epoller)	499	if (!epoller)
450	fatal ("no epoll found here, maybe it hides under your chair");	500	fatal ("no epoll found here, maybe it hides under your chair");
451		501
452	=item ev_default_destroy ()	502	=item ev_default_destroy ()
453		503
454	Destroys the default loop again (frees all memory and kernel state	504	Destroys the default loop again (frees all memory and kernel state
455	etc.). None of the active event watchers will be stopped in the normal	505	etc.). None of the active event watchers will be stopped in the normal
456	sense, so e.g. C<ev_is_active> might still return true. It is your	506	sense, so e.g. C<ev_is_active> might still return true. It is your
457	responsibility to either stop all watchers cleanly yoursef I<before>	507	responsibility to either stop all watchers cleanly yourself I<before>
458	calling this function, or cope with the fact afterwards (which is usually	508	calling this function, or cope with the fact afterwards (which is usually
459	the easiest thing, you can just ignore the watchers and/or C<free ()> them	509	the easiest thing, you can just ignore the watchers and/or C<free ()> them
460	for example).	510	for example).
461		511
462	Note that certain global state, such as signal state, will not be freed by	512	Note that certain global state, such as signal state, will not be freed by
…		…
473	Like C<ev_default_destroy>, but destroys an event loop created by an	523	Like C<ev_default_destroy>, but destroys an event loop created by an
474	earlier call to C<ev_loop_new>.	524	earlier call to C<ev_loop_new>.
475		525
476	=item ev_default_fork ()	526	=item ev_default_fork ()
477		527
		528	This function sets a flag that causes subsequent C<ev_loop> iterations
478	This function reinitialises the kernel state for backends that have	529	to reinitialise the kernel state for backends that have one. Despite the
479	one. Despite the name, you can call it anytime, but it makes most sense	530	name, you can call it anytime, but it makes most sense after forking, in
480	after forking, in either the parent or child process (or both, but that	531	the child process (or both child and parent, but that again makes little
481	again makes little sense).	532	sense). You I<must> call it in the child before using any of the libev
		533	functions, and it will only take effect at the next C<ev_loop> iteration.
482		534
483	You I<must> call this function in the child process after forking if and	535	On the other hand, you only need to call this function in the child
484	only if you want to use the event library in both processes. If you just	536	process if and only if you want to use the event library in the child. If
485	fork+exec, you don't have to call it.	537	you just fork+exec, you don't have to call it at all.
486		538
487	The function itself is quite fast and it's usually not a problem to call	539	The function itself is quite fast and it's usually not a problem to call
488	it just in case after a fork. To make this easy, the function will fit in	540	it just in case after a fork. To make this easy, the function will fit in
489	quite nicely into a call to C<pthread_atfork>:	541	quite nicely into a call to C<pthread_atfork>:
490		542
491	pthread_atfork (0, 0, ev_default_fork);	543	pthread_atfork (0, 0, ev_default_fork);
492		544
493	At the moment, C<EVBACKEND_SELECT> and C<EVBACKEND_POLL> are safe to use
494	without calling this function, so if you force one of those backends you
495	do not need to care.
496
497	=item ev_loop_fork (loop)	545	=item ev_loop_fork (loop)
498		546
499	Like C<ev_default_fork>, but acts on an event loop created by	547	Like C<ev_default_fork>, but acts on an event loop created by
500	C<ev_loop_new>. Yes, you have to call this on every allocated event loop	548	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
501	after fork, and how you do this is entirely your own problem.	549	after fork, and how you do this is entirely your own problem.
		550
		551	=item int ev_is_default_loop (loop)
		552
		553	Returns true when the given loop actually is the default loop, false otherwise.
502		554
503	=item unsigned int ev_loop_count (loop)	555	=item unsigned int ev_loop_count (loop)
504		556
505	Returns the count of loop iterations for the loop, which is identical to	557	Returns the count of loop iterations for the loop, which is identical to
506	the number of times libev did poll for new events. It starts at C<0> and	558	the number of times libev did poll for new events. It starts at C<0> and
…		…
541	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle	593	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle
542	those events and any outstanding ones, but will not block your process in	594	those events and any outstanding ones, but will not block your process in
543	case there are no events and will return after one iteration of the loop.	595	case there are no events and will return after one iteration of the loop.
544		596
545	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if	597	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if
546	neccessary) and will handle those and any outstanding ones. It will block	598	necessary) and will handle those and any outstanding ones. It will block
547	your process until at least one new event arrives, and will return after	599	your process until at least one new event arrives, and will return after
548	one iteration of the loop. This is useful if you are waiting for some	600	one iteration of the loop. This is useful if you are waiting for some
549	external event in conjunction with something not expressible using other	601	external event in conjunction with something not expressible using other
550	libev watchers. However, a pair of C<ev_prepare>/C<ev_check> watchers is	602	libev watchers. However, a pair of C<ev_prepare>/C<ev_check> watchers is
551	usually a better approach for this kind of thing.	603	usually a better approach for this kind of thing.
552		604
553	Here are the gory details of what C<ev_loop> does:	605	Here are the gory details of what C<ev_loop> does:
554		606
555	- Before the first iteration, call any pending watchers.	607	- Before the first iteration, call any pending watchers.
556	* If there are no active watchers (reference count is zero), return.	608	* If EVFLAG_FORKCHECK was used, check for a fork.
557	- Queue all prepare watchers and then call all outstanding watchers.	609	- If a fork was detected, queue and call all fork watchers.
		610	- Queue and call all prepare watchers.
558	- If we have been forked, recreate the kernel state.	611	- If we have been forked, recreate the kernel state.
559	- Update the kernel state with all outstanding changes.	612	- Update the kernel state with all outstanding changes.
560	- Update the "event loop time".	613	- Update the "event loop time".
561	- Calculate for how long to block.	614	- Calculate for how long to sleep or block, if at all
		615	(active idle watchers, EVLOOP_NONBLOCK or not having
		616	any active watchers at all will result in not sleeping).
		617	- Sleep if the I/O and timer collect interval say so.
562	- Block the process, waiting for any events.	618	- Block the process, waiting for any events.
563	- Queue all outstanding I/O (fd) events.	619	- Queue all outstanding I/O (fd) events.
564	- Update the "event loop time" and do time jump handling.	620	- Update the "event loop time" and do time jump handling.
565	- Queue all outstanding timers.	621	- Queue all outstanding timers.
566	- Queue all outstanding periodics.	622	- Queue all outstanding periodics.
567	- If no events are pending now, queue all idle watchers.	623	- If no events are pending now, queue all idle watchers.
568	- Queue all check watchers.	624	- Queue all check watchers.
569	- Call all queued watchers in reverse order (i.e. check watchers first).	625	- Call all queued watchers in reverse order (i.e. check watchers first).
570	Signals and child watchers are implemented as I/O watchers, and will	626	Signals and child watchers are implemented as I/O watchers, and will
571	be handled here by queueing them when their watcher gets executed.	627	be handled here by queueing them when their watcher gets executed.
572	- If ev_unloop has been called or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	628	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK
573	were used, return, otherwise continue with step *.	629	were used, or there are no active watchers, return, otherwise
		630	continue with step *.
574		631
575	Example: Queue some jobs and then loop until no events are outsanding	632	Example: Queue some jobs and then loop until no events are outstanding
576	anymore.	633	anymore.
577		634
578	... queue jobs here, make sure they register event watchers as long	635	... queue jobs here, make sure they register event watchers as long
579	... as they still have work to do (even an idle watcher will do..)	636	... as they still have work to do (even an idle watcher will do..)
580	ev_loop (my_loop, 0);	637	ev_loop (my_loop, 0);
…		…
584		641
585	Can be used to make a call to C<ev_loop> return early (but only after it	642	Can be used to make a call to C<ev_loop> return early (but only after it
586	has processed all outstanding events). The C<how> argument must be either	643	has processed all outstanding events). The C<how> argument must be either
587	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	644	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or
588	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	645	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.
		646
		647	This "unloop state" will be cleared when entering C<ev_loop> again.
589		648
590	=item ev_ref (loop)	649	=item ev_ref (loop)
591		650
592	=item ev_unref (loop)	651	=item ev_unref (loop)
593		652
…		…
598	returning, ev_unref() after starting, and ev_ref() before stopping it. For	657	returning, ev_unref() after starting, and ev_ref() before stopping it. For
599	example, libev itself uses this for its internal signal pipe: It is not	658	example, libev itself uses this for its internal signal pipe: It is not
600	visible to the libev user and should not keep C<ev_loop> from exiting if	659	visible to the libev user and should not keep C<ev_loop> from exiting if
601	no event watchers registered by it are active. It is also an excellent	660	no event watchers registered by it are active. It is also an excellent
602	way to do this for generic recurring timers or from within third-party	661	way to do this for generic recurring timers or from within third-party
603	libraries. Just remember to I<unref after start> and I<ref before stop>.	662	libraries. Just remember to I<unref after start> and I<ref before stop>
		663	(but only if the watcher wasn't active before, or was active before,
		664	respectively).
604		665
605	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	666	Example: Create a signal watcher, but keep it from keeping C<ev_loop>
606	running when nothing else is active.	667	running when nothing else is active.
607		668
608	struct ev_signal exitsig;	669	struct ev_signal exitsig;
609	ev_signal_init (&exitsig, sig_cb, SIGINT);	670	ev_signal_init (&exitsig, sig_cb, SIGINT);
610	ev_signal_start (loop, &exitsig);	671	ev_signal_start (loop, &exitsig);
611	evf_unref (loop);	672	evf_unref (loop);
612		673
613	Example: For some weird reason, unregister the above signal handler again.	674	Example: For some weird reason, unregister the above signal handler again.
614		675
615	ev_ref (loop);	676	ev_ref (loop);
616	ev_signal_stop (loop, &exitsig);	677	ev_signal_stop (loop, &exitsig);
617		678
618	=item ev_set_io_collect_interval (loop, ev_tstamp interval)	679	=item ev_set_io_collect_interval (loop, ev_tstamp interval)
619		680
620	=item ev_set_timeout_collect_interval (loop, ev_tstamp interval)	681	=item ev_set_timeout_collect_interval (loop, ev_tstamp interval)
621		682
…		…
643	to spend more time collecting timeouts, at the expense of increased	704	to spend more time collecting timeouts, at the expense of increased
644	latency (the watcher callback will be called later). C<ev_io> watchers	705	latency (the watcher callback will be called later). C<ev_io> watchers
645	will not be affected. Setting this to a non-null value will not introduce	706	will not be affected. Setting this to a non-null value will not introduce
646	any overhead in libev.	707	any overhead in libev.
647		708
648	Many (busy) programs can usually benefit by setting the io collect	709	Many (busy) programs can usually benefit by setting the I/O collect
649	interval to a value near C<0.1> or so, which is often enough for	710	interval to a value near C<0.1> or so, which is often enough for
650	interactive servers (of course not for games), likewise for timeouts. It	711	interactive servers (of course not for games), likewise for timeouts. It
651	usually doesn't make much sense to set it to a lower value than C<0.01>,	712	usually doesn't make much sense to set it to a lower value than C<0.01>,
652	as this approsaches the timing granularity of most systems.	713	as this approaches the timing granularity of most systems.
		714
		715	=item ev_loop_verify (loop)
		716
		717	This function only does something when C<EV_VERIFY> support has been
		718	compiled in. It tries to go through all internal structures and checks
		719	them for validity. If anything is found to be inconsistent, it will print
		720	an error message to standard error and call C<abort ()>.
		721
		722	This can be used to catch bugs inside libev itself: under normal
		723	circumstances, this function will never abort as of course libev keeps its
		724	data structures consistent.
653		725
654	=back	726	=back
655		727
656		728
657	=head1 ANATOMY OF A WATCHER	729	=head1 ANATOMY OF A WATCHER
658		730
659	A watcher is a structure that you create and register to record your	731	A watcher is a structure that you create and register to record your
660	interest in some event. For instance, if you want to wait for STDIN to	732	interest in some event. For instance, if you want to wait for STDIN to
661	become readable, you would create an C<ev_io> watcher for that:	733	become readable, you would create an C<ev_io> watcher for that:
662		734
663	static void my_cb (struct ev_loop *loop, struct ev_io *w, int revents)	735	static void my_cb (struct ev_loop *loop, struct ev_io *w, int revents)
664	{	736	{
665	ev_io_stop (w);	737	ev_io_stop (w);
666	ev_unloop (loop, EVUNLOOP_ALL);	738	ev_unloop (loop, EVUNLOOP_ALL);
667	}	739	}
668		740
669	struct ev_loop *loop = ev_default_loop (0);	741	struct ev_loop *loop = ev_default_loop (0);
670	struct ev_io stdin_watcher;	742	struct ev_io stdin_watcher;
671	ev_init (&stdin_watcher, my_cb);	743	ev_init (&stdin_watcher, my_cb);
672	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);	744	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
673	ev_io_start (loop, &stdin_watcher);	745	ev_io_start (loop, &stdin_watcher);
674	ev_loop (loop, 0);	746	ev_loop (loop, 0);
675		747
676	As you can see, you are responsible for allocating the memory for your	748	As you can see, you are responsible for allocating the memory for your
677	watcher structures (and it is usually a bad idea to do this on the stack,	749	watcher structures (and it is usually a bad idea to do this on the stack,
678	although this can sometimes be quite valid).	750	although this can sometimes be quite valid).
679		751
680	Each watcher structure must be initialised by a call to C<ev_init	752	Each watcher structure must be initialised by a call to C<ev_init
681	(watcher *, callback)>, which expects a callback to be provided. This	753	(watcher *, callback)>, which expects a callback to be provided. This
682	callback gets invoked each time the event occurs (or, in the case of io	754	callback gets invoked each time the event occurs (or, in the case of I/O
683	watchers, each time the event loop detects that the file descriptor given	755	watchers, each time the event loop detects that the file descriptor given
684	is readable and/or writable).	756	is readable and/or writable).
685		757
686	Each watcher type has its own C<< ev_<type>_set (watcher *, ...) >> macro	758	Each watcher type has its own C<< ev_<type>_set (watcher *, ...) >> macro
687	with arguments specific to this watcher type. There is also a macro	759	with arguments specific to this watcher type. There is also a macro
…		…
757	=item C<EV_FORK>	829	=item C<EV_FORK>
758		830
759	The event loop has been resumed in the child process after fork (see	831	The event loop has been resumed in the child process after fork (see
760	C<ev_fork>).	832	C<ev_fork>).
761		833
		834	=item C<EV_ASYNC>
		835
		836	The given async watcher has been asynchronously notified (see C<ev_async>).
		837
762	=item C<EV_ERROR>	838	=item C<EV_ERROR>
763		839
764	An unspecified error has occured, the watcher has been stopped. This might	840	An unspecified error has occurred, the watcher has been stopped. This might
765	happen because the watcher could not be properly started because libev	841	happen because the watcher could not be properly started because libev
766	ran out of memory, a file descriptor was found to be closed or any other	842	ran out of memory, a file descriptor was found to be closed or any other
767	problem. You best act on it by reporting the problem and somehow coping	843	problem. You best act on it by reporting the problem and somehow coping
768	with the watcher being stopped.	844	with the watcher being stopped.
769		845
770	Libev will usually signal a few "dummy" events together with an error,	846	Libev will usually signal a few "dummy" events together with an error,
771	for example it might indicate that a fd is readable or writable, and if	847	for example it might indicate that a fd is readable or writable, and if
772	your callbacks is well-written it can just attempt the operation and cope	848	your callbacks is well-written it can just attempt the operation and cope
773	with the error from read() or write(). This will not work in multithreaded	849	with the error from read() or write(). This will not work in multi-threaded
774	programs, though, so beware.	850	programs, though, so beware.
775		851
776	=back	852	=back
777		853
778	=head2 GENERIC WATCHER FUNCTIONS	854	=head2 GENERIC WATCHER FUNCTIONS
…		…
808	Although some watcher types do not have type-specific arguments	884	Although some watcher types do not have type-specific arguments
809	(e.g. C<ev_prepare>) you still need to call its C<set> macro.	885	(e.g. C<ev_prepare>) you still need to call its C<set> macro.
810		886
811	=item C<ev_TYPE_init> (ev_TYPE *watcher, callback, [args])	887	=item C<ev_TYPE_init> (ev_TYPE *watcher, callback, [args])
812		888
813	This convinience macro rolls both C<ev_init> and C<ev_TYPE_set> macro	889	This convenience macro rolls both C<ev_init> and C<ev_TYPE_set> macro
814	calls into a single call. This is the most convinient method to initialise	890	calls into a single call. This is the most convenient method to initialise
815	a watcher. The same limitations apply, of course.	891	a watcher. The same limitations apply, of course.
816		892
817	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)	893	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)
818		894
819	Starts (activates) the given watcher. Only active watchers will receive	895	Starts (activates) the given watcher. Only active watchers will receive
…		…
902	to associate arbitrary data with your watcher. If you need more data and	978	to associate arbitrary data with your watcher. If you need more data and
903	don't want to allocate memory and store a pointer to it in that data	979	don't want to allocate memory and store a pointer to it in that data
904	member, you can also "subclass" the watcher type and provide your own	980	member, you can also "subclass" the watcher type and provide your own
905	data:	981	data:
906		982
907	struct my_io	983	struct my_io
908	{	984	{
909	struct ev_io io;	985	struct ev_io io;
910	int otherfd;	986	int otherfd;
911	void *somedata;	987	void *somedata;
912	struct whatever *mostinteresting;	988	struct whatever *mostinteresting;
913	}	989	}
914		990
915	And since your callback will be called with a pointer to the watcher, you	991	And since your callback will be called with a pointer to the watcher, you
916	can cast it back to your own type:	992	can cast it back to your own type:
917		993
918	static void my_cb (struct ev_loop *loop, struct ev_io *w_, int revents)	994	static void my_cb (struct ev_loop *loop, struct ev_io *w_, int revents)
919	{	995	{
920	struct my_io *w = (struct my_io *)w_;	996	struct my_io *w = (struct my_io *)w_;
921	...	997	...
922	}	998	}
923		999
924	More interesting and less C-conformant ways of casting your callback type	1000	More interesting and less C-conformant ways of casting your callback type
925	instead have been omitted.	1001	instead have been omitted.
926		1002
927	Another common scenario is having some data structure with multiple	1003	Another common scenario is having some data structure with multiple
928	watchers:	1004	watchers:
929		1005
930	struct my_biggy	1006	struct my_biggy
931	{	1007	{
932	int some_data;	1008	int some_data;
933	ev_timer t1;	1009	ev_timer t1;
934	ev_timer t2;	1010	ev_timer t2;
935	}	1011	}
936		1012
937	In this case getting the pointer to C<my_biggy> is a bit more complicated,	1013	In this case getting the pointer to C<my_biggy> is a bit more complicated,
938	you need to use C<offsetof>:	1014	you need to use C<offsetof>:
939		1015
940	#include <stddef.h>	1016	#include <stddef.h>
941		1017
942	static void	1018	static void
943	t1_cb (EV_P_ struct ev_timer *w, int revents)	1019	t1_cb (EV_P_ struct ev_timer *w, int revents)
944	{	1020	{
945	struct my_biggy big = (struct my_biggy *	1021	struct my_biggy big = (struct my_biggy *
946	(((char *)w) - offsetof (struct my_biggy, t1));	1022	(((char *)w) - offsetof (struct my_biggy, t1));
947	}	1023	}
948		1024
949	static void	1025	static void
950	t2_cb (EV_P_ struct ev_timer *w, int revents)	1026	t2_cb (EV_P_ struct ev_timer *w, int revents)
951	{	1027	{
952	struct my_biggy big = (struct my_biggy *	1028	struct my_biggy big = (struct my_biggy *
953	(((char *)w) - offsetof (struct my_biggy, t2));	1029	(((char *)w) - offsetof (struct my_biggy, t2));
954	}	1030	}
955		1031
956		1032
957	=head1 WATCHER TYPES	1033	=head1 WATCHER TYPES
958		1034
959	This section describes each watcher in detail, but will not repeat	1035	This section describes each watcher in detail, but will not repeat
…		…
988	If you must do this, then force the use of a known-to-be-good backend	1064	If you must do this, then force the use of a known-to-be-good backend
989	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and	1065	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and
990	C<EVBACKEND_POLL>).	1066	C<EVBACKEND_POLL>).
991		1067
992	Another thing you have to watch out for is that it is quite easy to	1068	Another thing you have to watch out for is that it is quite easy to
993	receive "spurious" readyness notifications, that is your callback might	1069	receive "spurious" readiness notifications, that is your callback might
994	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1070	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
995	because there is no data. Not only are some backends known to create a	1071	because there is no data. Not only are some backends known to create a
996	lot of those (for example solaris ports), it is very easy to get into	1072	lot of those (for example Solaris ports), it is very easy to get into
997	this situation even with a relatively standard program structure. Thus	1073	this situation even with a relatively standard program structure. Thus
998	it is best to always use non-blocking I/O: An extra C<read>(2) returning	1074	it is best to always use non-blocking I/O: An extra C<read>(2) returning
999	C<EAGAIN> is far preferable to a program hanging until some data arrives.	1075	C<EAGAIN> is far preferable to a program hanging until some data arrives.
1000		1076
1001	If you cannot run the fd in non-blocking mode (for example you should not	1077	If you cannot run the fd in non-blocking mode (for example you should not
1002	play around with an Xlib connection), then you have to seperately re-test	1078	play around with an Xlib connection), then you have to separately re-test
1003	whether a file descriptor is really ready with a known-to-be good interface	1079	whether a file descriptor is really ready with a known-to-be good interface
1004	such as poll (fortunately in our Xlib example, Xlib already does this on	1080	such as poll (fortunately in our Xlib example, Xlib already does this on
1005	its own, so its quite safe to use).	1081	its own, so its quite safe to use).
1006		1082
1007	=head3 The special problem of disappearing file descriptors	1083	=head3 The special problem of disappearing file descriptors
…		…
1045	To support fork in your programs, you either have to call	1121	To support fork in your programs, you either have to call
1046	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,	1122	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,
1047	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or	1123	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or
1048	C<EVBACKEND_POLL>.	1124	C<EVBACKEND_POLL>.
1049		1125
		1126	=head3 The special problem of SIGPIPE
		1127
		1128	While not really specific to libev, it is easy to forget about SIGPIPE:
		1129	when reading from a pipe whose other end has been closed, your program
		1130	gets send a SIGPIPE, which, by default, aborts your program. For most
		1131	programs this is sensible behaviour, for daemons, this is usually
		1132	undesirable.
		1133
		1134	So when you encounter spurious, unexplained daemon exits, make sure you
		1135	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
		1136	somewhere, as that would have given you a big clue).
		1137
1050		1138
1051	=head3 Watcher-Specific Functions	1139	=head3 Watcher-Specific Functions
1052		1140
1053	=over 4	1141	=over 4
1054		1142
1055	=item ev_io_init (ev_io *, callback, int fd, int events)	1143	=item ev_io_init (ev_io *, callback, int fd, int events)
1056		1144
1057	=item ev_io_set (ev_io *, int fd, int events)	1145	=item ev_io_set (ev_io *, int fd, int events)
1058		1146
1059	Configures an C<ev_io> watcher. The C<fd> is the file descriptor to	1147	Configures an C<ev_io> watcher. The C<fd> is the file descriptor to
1060	rceeive events for and events is either C<EV_READ>, C<EV_WRITE> or	1148	receive events for and events is either C<EV_READ>, C<EV_WRITE> or
1061	C<EV_READ | EV_WRITE> to receive the given events.	1149	C<EV_READ | EV_WRITE> to receive the given events.
1062		1150
1063	=item int fd [read-only]	1151	=item int fd [read-only]
1064		1152
1065	The file descriptor being watched.	1153	The file descriptor being watched.
…		…
1074		1162
1075	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well	1163	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well
1076	readable, but only once. Since it is likely line-buffered, you could	1164	readable, but only once. Since it is likely line-buffered, you could
1077	attempt to read a whole line in the callback.	1165	attempt to read a whole line in the callback.
1078		1166
1079	static void	1167	static void
1080	stdin_readable_cb (struct ev_loop *loop, struct ev_io *w, int revents)	1168	stdin_readable_cb (struct ev_loop *loop, struct ev_io *w, int revents)
1081	{	1169	{
1082	ev_io_stop (loop, w);	1170	ev_io_stop (loop, w);
1083	.. read from stdin here (or from w->fd) and haqndle any I/O errors	1171	.. read from stdin here (or from w->fd) and haqndle any I/O errors
1084	}	1172	}
1085		1173
1086	...	1174	...
1087	struct ev_loop *loop = ev_default_init (0);	1175	struct ev_loop *loop = ev_default_init (0);
1088	struct ev_io stdin_readable;	1176	struct ev_io stdin_readable;
1089	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);	1177	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
1090	ev_io_start (loop, &stdin_readable);	1178	ev_io_start (loop, &stdin_readable);
1091	ev_loop (loop, 0);	1179	ev_loop (loop, 0);
1092		1180
1093		1181
1094	=head2 C<ev_timer> - relative and optionally repeating timeouts	1182	=head2 C<ev_timer> - relative and optionally repeating timeouts
1095		1183
1096	Timer watchers are simple relative timers that generate an event after a	1184	Timer watchers are simple relative timers that generate an event after a
1097	given time, and optionally repeating in regular intervals after that.	1185	given time, and optionally repeating in regular intervals after that.
1098		1186
1099	The timers are based on real time, that is, if you register an event that	1187	The timers are based on real time, that is, if you register an event that
1100	times out after an hour and you reset your system clock to last years	1188	times out after an hour and you reset your system clock to January last
1101	time, it will still time out after (roughly) and hour. "Roughly" because	1189	year, it will still time out after (roughly) and hour. "Roughly" because
1102	detecting time jumps is hard, and some inaccuracies are unavoidable (the	1190	detecting time jumps is hard, and some inaccuracies are unavoidable (the
1103	monotonic clock option helps a lot here).	1191	monotonic clock option helps a lot here).
1104		1192
1105	The relative timeouts are calculated relative to the C<ev_now ()>	1193	The relative timeouts are calculated relative to the C<ev_now ()>
1106	time. This is usually the right thing as this timestamp refers to the time	1194	time. This is usually the right thing as this timestamp refers to the time
…		…
1108	you suspect event processing to be delayed and you I<need> to base the timeout	1196	you suspect event processing to be delayed and you I<need> to base the timeout
1109	on the current time, use something like this to adjust for this:	1197	on the current time, use something like this to adjust for this:
1110		1198
1111	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);	1199	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);
1112		1200
1113	The callback is guarenteed to be invoked only when its timeout has passed,	1201	The callback is guaranteed to be invoked only after its timeout has passed,
1114	but if multiple timers become ready during the same loop iteration then	1202	but if multiple timers become ready during the same loop iteration then
1115	order of execution is undefined.	1203	order of execution is undefined.
1116		1204
1117	=head3 Watcher-Specific Functions and Data Members	1205	=head3 Watcher-Specific Functions and Data Members
1118		1206
…		…
1120		1208
1121	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	1209	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
1122		1210
1123	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)	1211	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)
1124		1212
1125	Configure the timer to trigger after C<after> seconds. If C<repeat> is	1213	Configure the timer to trigger after C<after> seconds. If C<repeat>
1126	C<0.>, then it will automatically be stopped. If it is positive, then the	1214	is C<0.>, then it will automatically be stopped once the timeout is
1127	timer will automatically be configured to trigger again C<repeat> seconds	1215	reached. If it is positive, then the timer will automatically be
1128	later, again, and again, until stopped manually.	1216	configured to trigger again C<repeat> seconds later, again, and again,
		1217	until stopped manually.
1129		1218
1130	The timer itself will do a best-effort at avoiding drift, that is, if you	1219	The timer itself will do a best-effort at avoiding drift, that is, if
1131	configure a timer to trigger every 10 seconds, then it will trigger at	1220	you configure a timer to trigger every 10 seconds, then it will normally
1132	exactly 10 second intervals. If, however, your program cannot keep up with	1221	trigger at exactly 10 second intervals. If, however, your program cannot
1133	the timer (because it takes longer than those 10 seconds to do stuff) the	1222	keep up with the timer (because it takes longer than those 10 seconds to
1134	timer will not fire more than once per event loop iteration.	1223	do stuff) the timer will not fire more than once per event loop iteration.
1135		1224
1136	=item ev_timer_again (loop)	1225	=item ev_timer_again (loop, ev_timer *)
1137		1226
1138	This will act as if the timer timed out and restart it again if it is	1227	This will act as if the timer timed out and restart it again if it is
1139	repeating. The exact semantics are:	1228	repeating. The exact semantics are:
1140		1229
1141	If the timer is pending, its pending status is cleared.	1230	If the timer is pending, its pending status is cleared.
1142		1231
1143	If the timer is started but nonrepeating, stop it (as if it timed out).	1232	If the timer is started but non-repeating, stop it (as if it timed out).
1144		1233
1145	If the timer is repeating, either start it if necessary (with the	1234	If the timer is repeating, either start it if necessary (with the
1146	C<repeat> value), or reset the running timer to the C<repeat> value.	1235	C<repeat> value), or reset the running timer to the C<repeat> value.
1147		1236
1148	This sounds a bit complicated, but here is a useful and typical	1237	This sounds a bit complicated, but here is a useful and typical
1149	example: Imagine you have a tcp connection and you want a so-called idle	1238	example: Imagine you have a TCP connection and you want a so-called idle
1150	timeout, that is, you want to be called when there have been, say, 60	1239	timeout, that is, you want to be called when there have been, say, 60
1151	seconds of inactivity on the socket. The easiest way to do this is to	1240	seconds of inactivity on the socket. The easiest way to do this is to
1152	configure an C<ev_timer> with a C<repeat> value of C<60> and then call	1241	configure an C<ev_timer> with a C<repeat> value of C<60> and then call
1153	C<ev_timer_again> each time you successfully read or write some data. If	1242	C<ev_timer_again> each time you successfully read or write some data. If
1154	you go into an idle state where you do not expect data to travel on the	1243	you go into an idle state where you do not expect data to travel on the
…		…
1180		1269
1181	=head3 Examples	1270	=head3 Examples
1182		1271
1183	Example: Create a timer that fires after 60 seconds.	1272	Example: Create a timer that fires after 60 seconds.
1184		1273
1185	static void	1274	static void
1186	one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)	1275	one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)
1187	{	1276	{
1188	.. one minute over, w is actually stopped right here	1277	.. one minute over, w is actually stopped right here
1189	}	1278	}
1190		1279
1191	struct ev_timer mytimer;	1280	struct ev_timer mytimer;
1192	ev_timer_init (&mytimer, one_minute_cb, 60., 0.);	1281	ev_timer_init (&mytimer, one_minute_cb, 60., 0.);
1193	ev_timer_start (loop, &mytimer);	1282	ev_timer_start (loop, &mytimer);
1194		1283
1195	Example: Create a timeout timer that times out after 10 seconds of	1284	Example: Create a timeout timer that times out after 10 seconds of
1196	inactivity.	1285	inactivity.
1197		1286
1198	static void	1287	static void
1199	timeout_cb (struct ev_loop *loop, struct ev_timer *w, int revents)	1288	timeout_cb (struct ev_loop *loop, struct ev_timer *w, int revents)
1200	{	1289	{
1201	.. ten seconds without any activity	1290	.. ten seconds without any activity
1202	}	1291	}
1203		1292
1204	struct ev_timer mytimer;	1293	struct ev_timer mytimer;
1205	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */	1294	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
1206	ev_timer_again (&mytimer); /* start timer */	1295	ev_timer_again (&mytimer); /* start timer */
1207	ev_loop (loop, 0);	1296	ev_loop (loop, 0);
1208		1297
1209	// and in some piece of code that gets executed on any "activity":	1298	// and in some piece of code that gets executed on any "activity":
1210	// reset the timeout to start ticking again at 10 seconds	1299	// reset the timeout to start ticking again at 10 seconds
1211	ev_timer_again (&mytimer);	1300	ev_timer_again (&mytimer);
1212		1301
1213		1302
1214	=head2 C<ev_periodic> - to cron or not to cron?	1303	=head2 C<ev_periodic> - to cron or not to cron?
1215		1304
1216	Periodic watchers are also timers of a kind, but they are very versatile	1305	Periodic watchers are also timers of a kind, but they are very versatile
1217	(and unfortunately a bit complex).	1306	(and unfortunately a bit complex).
1218		1307
1219	Unlike C<ev_timer>'s, they are not based on real time (or relative time)	1308	Unlike C<ev_timer>'s, they are not based on real time (or relative time)
1220	but on wallclock time (absolute time). You can tell a periodic watcher	1309	but on wall clock time (absolute time). You can tell a periodic watcher
1221	to trigger "at" some specific point in time. For example, if you tell a	1310	to trigger after some specific point in time. For example, if you tell a
1222	periodic watcher to trigger in 10 seconds (by specifiying e.g. C<ev_now ()	1311	periodic watcher to trigger in 10 seconds (by specifying e.g. C<ev_now ()
1223	+ 10.>) and then reset your system clock to the last year, then it will	1312	+ 10.>, that is, an absolute time not a delay) and then reset your system
		1313	clock to January of the previous year, then it will take more than year
1224	take a year to trigger the event (unlike an C<ev_timer>, which would trigger	1314	to trigger the event (unlike an C<ev_timer>, which would still trigger
1225	roughly 10 seconds later).	1315	roughly 10 seconds later as it uses a relative timeout).
1226		1316
1227	They can also be used to implement vastly more complex timers, such as	1317	C<ev_periodic>s can also be used to implement vastly more complex timers,
1228	triggering an event on each midnight, local time or other, complicated,	1318	such as triggering an event on each "midnight, local time", or other
1229	rules.	1319	complicated, rules.
1230		1320
1231	As with timers, the callback is guarenteed to be invoked only when the	1321	As with timers, the callback is guaranteed to be invoked only when the
1232	time (C<at>) has been passed, but if multiple periodic timers become ready	1322	time (C<at>) has passed, but if multiple periodic timers become ready
1233	during the same loop iteration then order of execution is undefined.	1323	during the same loop iteration then order of execution is undefined.
1234		1324
1235	=head3 Watcher-Specific Functions and Data Members	1325	=head3 Watcher-Specific Functions and Data Members
1236		1326
1237	=over 4	1327	=over 4
…		…
1245		1335
1246	=over 4	1336	=over 4
1247		1337
1248	=item * absolute timer (at = time, interval = reschedule_cb = 0)	1338	=item * absolute timer (at = time, interval = reschedule_cb = 0)
1249		1339
1250	In this configuration the watcher triggers an event at the wallclock time	1340	In this configuration the watcher triggers an event after the wall clock
1251	C<at> and doesn't repeat. It will not adjust when a time jump occurs,	1341	time C<at> has passed and doesn't repeat. It will not adjust when a time
1252	that is, if it is to be run at January 1st 2011 then it will run when the	1342	jump occurs, that is, if it is to be run at January 1st 2011 then it will
1253	system time reaches or surpasses this time.	1343	run when the system time reaches or surpasses this time.
1254		1344
1255	=item * non-repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)	1345	=item * repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)
1256		1346
1257	In this mode the watcher will always be scheduled to time out at the next	1347	In this mode the watcher will always be scheduled to time out at the next
1258	C<at + N * interval> time (for some integer N, which can also be negative)	1348	C<at + N * interval> time (for some integer N, which can also be negative)
1259	and then repeat, regardless of any time jumps.	1349	and then repeat, regardless of any time jumps.
1260		1350
1261	This can be used to create timers that do not drift with respect to system	1351	This can be used to create timers that do not drift with respect to system
1262	time:	1352	time, for example, here is a C<ev_periodic> that triggers each hour, on
		1353	the hour:
1263		1354
1264	ev_periodic_set (&periodic, 0., 3600., 0);	1355	ev_periodic_set (&periodic, 0., 3600., 0);
1265		1356
1266	This doesn't mean there will always be 3600 seconds in between triggers,	1357	This doesn't mean there will always be 3600 seconds in between triggers,
1267	but only that the the callback will be called when the system time shows a	1358	but only that the callback will be called when the system time shows a
1268	full hour (UTC), or more correctly, when the system time is evenly divisible	1359	full hour (UTC), or more correctly, when the system time is evenly divisible
1269	by 3600.	1360	by 3600.
1270		1361
1271	Another way to think about it (for the mathematically inclined) is that	1362	Another way to think about it (for the mathematically inclined) is that
1272	C<ev_periodic> will try to run the callback in this mode at the next possible	1363	C<ev_periodic> will try to run the callback in this mode at the next possible
1273	time where C<time = at (mod interval)>, regardless of any time jumps.	1364	time where C<time = at (mod interval)>, regardless of any time jumps.
1274		1365
1275	For numerical stability it is preferable that the C<at> value is near	1366	For numerical stability it is preferable that the C<at> value is near
1276	C<ev_now ()> (the current time), but there is no range requirement for	1367	C<ev_now ()> (the current time), but there is no range requirement for
1277	this value.	1368	this value, and in fact is often specified as zero.
		1369
		1370	Note also that there is an upper limit to how often a timer can fire (CPU
		1371	speed for example), so if C<interval> is very small then timing stability
		1372	will of course deteriorate. Libev itself tries to be exact to be about one
		1373	millisecond (if the OS supports it and the machine is fast enough).
1278		1374
1279	=item * manual reschedule mode (at and interval ignored, reschedule_cb = callback)	1375	=item * manual reschedule mode (at and interval ignored, reschedule_cb = callback)
1280		1376
1281	In this mode the values for C<interval> and C<at> are both being	1377	In this mode the values for C<interval> and C<at> are both being
1282	ignored. Instead, each time the periodic watcher gets scheduled, the	1378	ignored. Instead, each time the periodic watcher gets scheduled, the
1283	reschedule callback will be called with the watcher as first, and the	1379	reschedule callback will be called with the watcher as first, and the
1284	current time as second argument.	1380	current time as second argument.
1285		1381
1286	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,	1382	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,
1287	ever, or make any event loop modifications>. If you need to stop it,	1383	ever, or make ANY event loop modifications whatsoever>.
1288	return C<now + 1e30> (or so, fudge fudge) and stop it afterwards (e.g. by
1289	starting an C<ev_prepare> watcher, which is legal).
1290		1384
		1385	If you need to stop it, return C<now + 1e30> (or so, fudge fudge) and stop
		1386	it afterwards (e.g. by starting an C<ev_prepare> watcher, which is the
		1387	only event loop modification you are allowed to do).
		1388
1291	Its prototype is C<ev_tstamp (*reschedule_cb)(struct ev_periodic *w,	1389	The callback prototype is C<ev_tstamp (*reschedule_cb)(struct ev_periodic
1292	ev_tstamp now)>, e.g.:	1390	*w, ev_tstamp now)>, e.g.:
1293		1391
1294	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)	1392	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)
1295	{	1393	{
1296	return now + 60.;	1394	return now + 60.;
1297	}	1395	}
…		…
1299	It must return the next time to trigger, based on the passed time value	1397	It must return the next time to trigger, based on the passed time value
1300	(that is, the lowest time value larger than to the second argument). It	1398	(that is, the lowest time value larger than to the second argument). It
1301	will usually be called just before the callback will be triggered, but	1399	will usually be called just before the callback will be triggered, but
1302	might be called at other times, too.	1400	might be called at other times, too.
1303		1401
1304	NOTE: I<< This callback must always return a time that is later than the	1402	NOTE: I<< This callback must always return a time that is higher than or
1305	passed C<now> value >>. Not even C<now> itself will do, it I<must> be larger.	1403	equal to the passed C<now> value >>.
1306		1404
1307	This can be used to create very complex timers, such as a timer that	1405	This can be used to create very complex timers, such as a timer that
1308	triggers on each midnight, local time. To do this, you would calculate the	1406	triggers on "next midnight, local time". To do this, you would calculate the
1309	next midnight after C<now> and return the timestamp value for this. How	1407	next midnight after C<now> and return the timestamp value for this. How
1310	you do this is, again, up to you (but it is not trivial, which is the main	1408	you do this is, again, up to you (but it is not trivial, which is the main
1311	reason I omitted it as an example).	1409	reason I omitted it as an example).
1312		1410
1313	=back	1411	=back
…		…
1317	Simply stops and restarts the periodic watcher again. This is only useful	1415	Simply stops and restarts the periodic watcher again. This is only useful
1318	when you changed some parameters or the reschedule callback would return	1416	when you changed some parameters or the reschedule callback would return
1319	a different time than the last time it was called (e.g. in a crond like	1417	a different time than the last time it was called (e.g. in a crond like
1320	program when the crontabs have changed).	1418	program when the crontabs have changed).
1321		1419
		1420	=item ev_tstamp ev_periodic_at (ev_periodic *)
		1421
		1422	When active, returns the absolute time that the watcher is supposed to
		1423	trigger next.
		1424
1322	=item ev_tstamp offset [read-write]	1425	=item ev_tstamp offset [read-write]
1323		1426
1324	When repeating, this contains the offset value, otherwise this is the	1427	When repeating, this contains the offset value, otherwise this is the
1325	absolute point in time (the C<at> value passed to C<ev_periodic_set>).	1428	absolute point in time (the C<at> value passed to C<ev_periodic_set>).
1326		1429
…		…
1337		1440
1338	The current reschedule callback, or C<0>, if this functionality is	1441	The current reschedule callback, or C<0>, if this functionality is
1339	switched off. Can be changed any time, but changes only take effect when	1442	switched off. Can be changed any time, but changes only take effect when
1340	the periodic timer fires or C<ev_periodic_again> is being called.	1443	the periodic timer fires or C<ev_periodic_again> is being called.
1341		1444
1342	=item ev_tstamp at [read-only]
1343
1344	When active, contains the absolute time that the watcher is supposed to
1345	trigger next.
1346
1347	=back	1445	=back
1348		1446
1349	=head3 Examples	1447	=head3 Examples
1350		1448
1351	Example: Call a callback every hour, or, more precisely, whenever the	1449	Example: Call a callback every hour, or, more precisely, whenever the
1352	system clock is divisible by 3600. The callback invocation times have	1450	system clock is divisible by 3600. The callback invocation times have
1353	potentially a lot of jittering, but good long-term stability.	1451	potentially a lot of jitter, but good long-term stability.
1354		1452
1355	static void	1453	static void
1356	clock_cb (struct ev_loop *loop, struct ev_io *w, int revents)	1454	clock_cb (struct ev_loop *loop, struct ev_io *w, int revents)
1357	{	1455	{
1358	... its now a full hour (UTC, or TAI or whatever your clock follows)	1456	... its now a full hour (UTC, or TAI or whatever your clock follows)
1359	}	1457	}
1360		1458
1361	struct ev_periodic hourly_tick;	1459	struct ev_periodic hourly_tick;
1362	ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);	1460	ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);
1363	ev_periodic_start (loop, &hourly_tick);	1461	ev_periodic_start (loop, &hourly_tick);
1364		1462
1365	Example: The same as above, but use a reschedule callback to do it:	1463	Example: The same as above, but use a reschedule callback to do it:
1366		1464
1367	#include <math.h>	1465	#include <math.h>
1368		1466
1369	static ev_tstamp	1467	static ev_tstamp
1370	my_scheduler_cb (struct ev_periodic *w, ev_tstamp now)	1468	my_scheduler_cb (struct ev_periodic *w, ev_tstamp now)
1371	{	1469	{
1372	return fmod (now, 3600.) + 3600.;	1470	return fmod (now, 3600.) + 3600.;
1373	}	1471	}
1374		1472
1375	ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);	1473	ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);
1376		1474
1377	Example: Call a callback every hour, starting now:	1475	Example: Call a callback every hour, starting now:
1378		1476
1379	struct ev_periodic hourly_tick;	1477	struct ev_periodic hourly_tick;
1380	ev_periodic_init (&hourly_tick, clock_cb,	1478	ev_periodic_init (&hourly_tick, clock_cb,
1381	fmod (ev_now (loop), 3600.), 3600., 0);	1479	fmod (ev_now (loop), 3600.), 3600., 0);
1382	ev_periodic_start (loop, &hourly_tick);	1480	ev_periodic_start (loop, &hourly_tick);
1383		1481
1384		1482
1385	=head2 C<ev_signal> - signal me when a signal gets signalled!	1483	=head2 C<ev_signal> - signal me when a signal gets signalled!
1386		1484
1387	Signal watchers will trigger an event when the process receives a specific	1485	Signal watchers will trigger an event when the process receives a specific
…		…
1394	with the kernel (thus it coexists with your own signal handlers as long	1492	with the kernel (thus it coexists with your own signal handlers as long
1395	as you don't register any with libev). Similarly, when the last signal	1493	as you don't register any with libev). Similarly, when the last signal
1396	watcher for a signal is stopped libev will reset the signal handler to	1494	watcher for a signal is stopped libev will reset the signal handler to
1397	SIG_DFL (regardless of what it was set to before).	1495	SIG_DFL (regardless of what it was set to before).
1398		1496
		1497	If possible and supported, libev will install its handlers with
		1498	C<SA_RESTART> behaviour enabled, so system calls should not be unduly
		1499	interrupted. If you have a problem with system calls getting interrupted by
		1500	signals you can block all signals in an C<ev_check> watcher and unblock
		1501	them in an C<ev_prepare> watcher.
		1502
1399	=head3 Watcher-Specific Functions and Data Members	1503	=head3 Watcher-Specific Functions and Data Members
1400		1504
1401	=over 4	1505	=over 4
1402		1506
1403	=item ev_signal_init (ev_signal *, callback, int signum)	1507	=item ev_signal_init (ev_signal *, callback, int signum)
…		…
1411		1515
1412	The signal the watcher watches out for.	1516	The signal the watcher watches out for.
1413		1517
1414	=back	1518	=back
1415		1519
		1520	=head3 Examples
		1521
		1522	Example: Try to exit cleanly on SIGINT and SIGTERM.
		1523
		1524	static void
		1525	sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)
		1526	{
		1527	ev_unloop (loop, EVUNLOOP_ALL);
		1528	}
		1529
		1530	struct ev_signal signal_watcher;
		1531	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
		1532	ev_signal_start (loop, &sigint_cb);
		1533
1416		1534
1417	=head2 C<ev_child> - watch out for process status changes	1535	=head2 C<ev_child> - watch out for process status changes
1418		1536
1419	Child watchers trigger when your process receives a SIGCHLD in response to	1537	Child watchers trigger when your process receives a SIGCHLD in response to
1420	some child status changes (most typically when a child of yours dies).	1538	some child status changes (most typically when a child of yours dies). It
		1539	is permissible to install a child watcher I<after> the child has been
		1540	forked (which implies it might have already exited), as long as the event
		1541	loop isn't entered (or is continued from a watcher).
		1542
		1543	Only the default event loop is capable of handling signals, and therefore
		1544	you can only register child watchers in the default event loop.
		1545
		1546	=head3 Process Interaction
		1547
		1548	Libev grabs C<SIGCHLD> as soon as the default event loop is
		1549	initialised. This is necessary to guarantee proper behaviour even if
		1550	the first child watcher is started after the child exits. The occurrence
		1551	of C<SIGCHLD> is recorded asynchronously, but child reaping is done
		1552	synchronously as part of the event loop processing. Libev always reaps all
		1553	children, even ones not watched.
		1554
		1555	=head3 Overriding the Built-In Processing
		1556
		1557	Libev offers no special support for overriding the built-in child
		1558	processing, but if your application collides with libev's default child
		1559	handler, you can override it easily by installing your own handler for
		1560	C<SIGCHLD> after initialising the default loop, and making sure the
		1561	default loop never gets destroyed. You are encouraged, however, to use an
		1562	event-based approach to child reaping and thus use libev's support for
		1563	that, so other libev users can use C<ev_child> watchers freely.
1421		1564
1422	=head3 Watcher-Specific Functions and Data Members	1565	=head3 Watcher-Specific Functions and Data Members
1423		1566
1424	=over 4	1567	=over 4
1425		1568
1426	=item ev_child_init (ev_child *, callback, int pid)	1569	=item ev_child_init (ev_child *, callback, int pid, int trace)
1427		1570
1428	=item ev_child_set (ev_child *, int pid)	1571	=item ev_child_set (ev_child *, int pid, int trace)
1429		1572
1430	Configures the watcher to wait for status changes of process C<pid> (or	1573	Configures the watcher to wait for status changes of process C<pid> (or
1431	I<any> process if C<pid> is specified as C<0>). The callback can look	1574	I<any> process if C<pid> is specified as C<0>). The callback can look
1432	at the C<rstatus> member of the C<ev_child> watcher structure to see	1575	at the C<rstatus> member of the C<ev_child> watcher structure to see
1433	the status word (use the macros from C<sys/wait.h> and see your systems	1576	the status word (use the macros from C<sys/wait.h> and see your systems
1434	C<waitpid> documentation). The C<rpid> member contains the pid of the	1577	C<waitpid> documentation). The C<rpid> member contains the pid of the
1435	process causing the status change.	1578	process causing the status change. C<trace> must be either C<0> (only
		1579	activate the watcher when the process terminates) or C<1> (additionally
		1580	activate the watcher when the process is stopped or continued).
1436		1581
1437	=item int pid [read-only]	1582	=item int pid [read-only]
1438		1583
1439	The process id this watcher watches out for, or C<0>, meaning any process id.	1584	The process id this watcher watches out for, or C<0>, meaning any process id.
1440		1585
…		…
1449		1594
1450	=back	1595	=back
1451		1596
1452	=head3 Examples	1597	=head3 Examples
1453		1598
1454	Example: Try to exit cleanly on SIGINT and SIGTERM.	1599	Example: C<fork()> a new process and install a child handler to wait for
		1600	its completion.
1455		1601
		1602	ev_child cw;
		1603
1456	static void	1604	static void
1457	sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)	1605	child_cb (EV_P_ struct ev_child *w, int revents)
1458	{	1606	{
1459	ev_unloop (loop, EVUNLOOP_ALL);	1607	ev_child_stop (EV_A_ w);
		1608	printf ("process %d exited with status %x\n", w->rpid, w->rstatus);
1460	}	1609	}
1461		1610
1462	struct ev_signal signal_watcher;	1611	pid_t pid = fork ();
1463	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	1612
1464	ev_signal_start (loop, &sigint_cb);	1613	if (pid < 0)
		1614	// error
		1615	else if (pid == 0)
		1616	{
		1617	// the forked child executes here
		1618	exit (1);
		1619	}
		1620	else
		1621	{
		1622	ev_child_init (&cw, child_cb, pid, 0);
		1623	ev_child_start (EV_DEFAULT_ &cw);
		1624	}
1465		1625
1466		1626
1467	=head2 C<ev_stat> - did the file attributes just change?	1627	=head2 C<ev_stat> - did the file attributes just change?
1468		1628
1469	This watches a filesystem path for attribute changes. That is, it calls	1629	This watches a file system path for attribute changes. That is, it calls
1470	C<stat> regularly (or when the OS says it changed) and sees if it changed	1630	C<stat> regularly (or when the OS says it changed) and sees if it changed
1471	compared to the last time, invoking the callback if it did.	1631	compared to the last time, invoking the callback if it did.
1472		1632
1473	The path does not need to exist: changing from "path exists" to "path does	1633	The path does not need to exist: changing from "path exists" to "path does
1474	not exist" is a status change like any other. The condition "path does	1634	not exist" is a status change like any other. The condition "path does
…		…
1492	as even with OS-supported change notifications, this can be	1652	as even with OS-supported change notifications, this can be
1493	resource-intensive.	1653	resource-intensive.
1494		1654
1495	At the time of this writing, only the Linux inotify interface is	1655	At the time of this writing, only the Linux inotify interface is
1496	implemented (implementing kqueue support is left as an exercise for the	1656	implemented (implementing kqueue support is left as an exercise for the
		1657	reader, note, however, that the author sees no way of implementing ev_stat
1497	reader). Inotify will be used to give hints only and should not change the	1658	semantics with kqueue). Inotify will be used to give hints only and should
1498	semantics of C<ev_stat> watchers, which means that libev sometimes needs	1659	not change the semantics of C<ev_stat> watchers, which means that libev
1499	to fall back to regular polling again even with inotify, but changes are	1660	sometimes needs to fall back to regular polling again even with inotify,
1500	usually detected immediately, and if the file exists there will be no	1661	but changes are usually detected immediately, and if the file exists there
1501	polling.	1662	will be no polling.
		1663
		1664	=head3 ABI Issues (Largefile Support)
		1665
		1666	Libev by default (unless the user overrides this) uses the default
		1667	compilation environment, which means that on systems with large file
		1668	support disabled by default, you get the 32 bit version of the stat
		1669	structure. When using the library from programs that change the ABI to
		1670	use 64 bit file offsets the programs will fail. In that case you have to
		1671	compile libev with the same flags to get binary compatibility. This is
		1672	obviously the case with any flags that change the ABI, but the problem is
		1673	most noticeably disabled with ev_stat and large file support.
		1674
		1675	The solution for this is to lobby your distribution maker to make large
		1676	file interfaces available by default (as e.g. FreeBSD does) and not
		1677	optional. Libev cannot simply switch on large file support because it has
		1678	to exchange stat structures with application programs compiled using the
		1679	default compilation environment.
1502		1680
1503	=head3 Inotify	1681	=head3 Inotify
1504		1682
1505	When C<inotify (7)> support has been compiled into libev (generally only	1683	When C<inotify (7)> support has been compiled into libev (generally only
1506	available on Linux) and present at runtime, it will be used to speed up	1684	available on Linux) and present at runtime, it will be used to speed up
1507	change detection where possible. The inotify descriptor will be created lazily	1685	change detection where possible. The inotify descriptor will be created lazily
1508	when the first C<ev_stat> watcher is being started.	1686	when the first C<ev_stat> watcher is being started.
1509		1687
1510	Inotify presense does not change the semantics of C<ev_stat> watchers	1688	Inotify presence does not change the semantics of C<ev_stat> watchers
1511	except that changes might be detected earlier, and in some cases, to avoid	1689	except that changes might be detected earlier, and in some cases, to avoid
1512	making regular C<stat> calls. Even in the presense of inotify support	1690	making regular C<stat> calls. Even in the presence of inotify support
1513	there are many cases where libev has to resort to regular C<stat> polling.	1691	there are many cases where libev has to resort to regular C<stat> polling.
1514		1692
1515	(There is no support for kqueue, as apparently it cannot be used to	1693	(There is no support for kqueue, as apparently it cannot be used to
1516	implement this functionality, due to the requirement of having a file	1694	implement this functionality, due to the requirement of having a file
1517	descriptor open on the object at all times).	1695	descriptor open on the object at all times).
1518		1696
1519	=head3 The special problem of stat time resolution	1697	=head3 The special problem of stat time resolution
1520		1698
1521	The C<stat ()> syscall only supports full-second resolution portably, and	1699	The C<stat ()> system call only supports full-second resolution portably, and
1522	even on systems where the resolution is higher, many filesystems still	1700	even on systems where the resolution is higher, many file systems still
1523	only support whole seconds.	1701	only support whole seconds.
1524		1702
1525	That means that, if the time is the only thing that changes, you might	1703	That means that, if the time is the only thing that changes, you can
1526	miss updates: on the first update, C<ev_stat> detects a change and calls	1704	easily miss updates: on the first update, C<ev_stat> detects a change and
1527	your callback, which does something. When there is another update within	1705	calls your callback, which does something. When there is another update
1528	the same second, C<ev_stat> will be unable to detect it.	1706	within the same second, C<ev_stat> will be unable to detect it as the stat
		1707	data does not change.
1529		1708
1530	The solution to this is to delay acting on a change for a second (or till	1709	The solution to this is to delay acting on a change for slightly more
1531	the next second boundary), using a roughly one-second delay C<ev_timer>	1710	than a second (or till slightly after the next full second boundary), using
1532	(C<ev_timer_set (w, 0., 1.01); ev_timer_again (loop, w)>). The C<.01>	1711	a roughly one-second-delay C<ev_timer> (e.g. C<ev_timer_set (w, 0., 1.02);
1533	is added to work around small timing inconsistencies of some operating	1712	ev_timer_again (loop, w)>).
1534	systems.	1713
		1714	The C<.02> offset is added to work around small timing inconsistencies
		1715	of some operating systems (where the second counter of the current time
		1716	might be be delayed. One such system is the Linux kernel, where a call to
		1717	C<gettimeofday> might return a timestamp with a full second later than
		1718	a subsequent C<time> call - if the equivalent of C<time ()> is used to
		1719	update file times then there will be a small window where the kernel uses
		1720	the previous second to update file times but libev might already execute
		1721	the timer callback).
1535		1722
1536	=head3 Watcher-Specific Functions and Data Members	1723	=head3 Watcher-Specific Functions and Data Members
1537		1724
1538	=over 4	1725	=over 4
1539		1726
…		…
1545	C<path>. The C<interval> is a hint on how quickly a change is expected to	1732	C<path>. The C<interval> is a hint on how quickly a change is expected to
1546	be detected and should normally be specified as C<0> to let libev choose	1733	be detected and should normally be specified as C<0> to let libev choose
1547	a suitable value. The memory pointed to by C<path> must point to the same	1734	a suitable value. The memory pointed to by C<path> must point to the same
1548	path for as long as the watcher is active.	1735	path for as long as the watcher is active.
1549		1736
1550	The callback will be receive C<EV_STAT> when a change was detected,	1737	The callback will receive C<EV_STAT> when a change was detected, relative
1551	relative to the attributes at the time the watcher was started (or the	1738	to the attributes at the time the watcher was started (or the last change
1552	last change was detected).	1739	was detected).
1553		1740
1554	=item ev_stat_stat (ev_stat *)	1741	=item ev_stat_stat (loop, ev_stat *)
1555		1742
1556	Updates the stat buffer immediately with new values. If you change the	1743	Updates the stat buffer immediately with new values. If you change the
1557	watched path in your callback, you could call this fucntion to avoid	1744	watched path in your callback, you could call this function to avoid
1558	detecting this change (while introducing a race condition). Can also be	1745	detecting this change (while introducing a race condition if you are not
1559	useful simply to find out the new values.	1746	the only one changing the path). Can also be useful simply to find out the
		1747	new values.
1560		1748
1561	=item ev_statdata attr [read-only]	1749	=item ev_statdata attr [read-only]
1562		1750
1563	The most-recently detected attributes of the file. Although the type is of	1751	The most-recently detected attributes of the file. Although the type is
1564	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types	1752	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types
1565	suitable for your system. If the C<st_nlink> member is C<0>, then there	1753	suitable for your system, but you can only rely on the POSIX-standardised
		1754	members to be present. If the C<st_nlink> member is C<0>, then there was
1566	was some error while C<stat>ing the file.	1755	some error while C<stat>ing the file.
1567		1756
1568	=item ev_statdata prev [read-only]	1757	=item ev_statdata prev [read-only]
1569		1758
1570	The previous attributes of the file. The callback gets invoked whenever	1759	The previous attributes of the file. The callback gets invoked whenever
1571	C<prev> != C<attr>.	1760	C<prev> != C<attr>, or, more precisely, one or more of these members
		1761	differ: C<st_dev>, C<st_ino>, C<st_mode>, C<st_nlink>, C<st_uid>,
		1762	C<st_gid>, C<st_rdev>, C<st_size>, C<st_atime>, C<st_mtime>, C<st_ctime>.
1572		1763
1573	=item ev_tstamp interval [read-only]	1764	=item ev_tstamp interval [read-only]
1574		1765
1575	The specified interval.	1766	The specified interval.
1576		1767
1577	=item const char *path [read-only]	1768	=item const char *path [read-only]
1578		1769
1579	The filesystem path that is being watched.	1770	The file system path that is being watched.
1580		1771
1581	=back	1772	=back
1582		1773
1583	=head3 Examples	1774	=head3 Examples
1584		1775
1585	Example: Watch C</etc/passwd> for attribute changes.	1776	Example: Watch C</etc/passwd> for attribute changes.
1586		1777
1587	static void	1778	static void
1588	passwd_cb (struct ev_loop *loop, ev_stat *w, int revents)	1779	passwd_cb (struct ev_loop *loop, ev_stat *w, int revents)
1589	{	1780	{
1590	/* /etc/passwd changed in some way */	1781	/* /etc/passwd changed in some way */
1591	if (w->attr.st_nlink)	1782	if (w->attr.st_nlink)
1592	{	1783	{
1593	printf ("passwd current size %ld\n", (long)w->attr.st_size);	1784	printf ("passwd current size %ld\n", (long)w->attr.st_size);
1594	printf ("passwd current atime %ld\n", (long)w->attr.st_mtime);	1785	printf ("passwd current atime %ld\n", (long)w->attr.st_mtime);
1595	printf ("passwd current mtime %ld\n", (long)w->attr.st_mtime);	1786	printf ("passwd current mtime %ld\n", (long)w->attr.st_mtime);
1596	}	1787	}
1597	else	1788	else
1598	/* you shalt not abuse printf for puts */	1789	/* you shalt not abuse printf for puts */
1599	puts ("wow, /etc/passwd is not there, expect problems. "	1790	puts ("wow, /etc/passwd is not there, expect problems. "
1600	"if this is windows, they already arrived\n");	1791	"if this is windows, they already arrived\n");
1601	}	1792	}
1602		1793
1603	...	1794	...
1604	ev_stat passwd;	1795	ev_stat passwd;
1605		1796
1606	ev_stat_init (&passwd, passwd_cb, "/etc/passwd", 0.);	1797	ev_stat_init (&passwd, passwd_cb, "/etc/passwd", 0.);
1607	ev_stat_start (loop, &passwd);	1798	ev_stat_start (loop, &passwd);
1608		1799
1609	Example: Like above, but additionally use a one-second delay so we do not	1800	Example: Like above, but additionally use a one-second delay so we do not
1610	miss updates (however, frequent updates will delay processing, too, so	1801	miss updates (however, frequent updates will delay processing, too, so
1611	one might do the work both on C<ev_stat> callback invocation I<and> on	1802	one might do the work both on C<ev_stat> callback invocation I<and> on
1612	C<ev_timer> callback invocation).	1803	C<ev_timer> callback invocation).
1613		1804
1614	static ev_stat passwd;	1805	static ev_stat passwd;
1615	static ev_timer timer;	1806	static ev_timer timer;
1616		1807
1617	static void	1808	static void
1618	timer_cb (EV_P_ ev_timer *w, int revents)	1809	timer_cb (EV_P_ ev_timer *w, int revents)
1619	{	1810	{
1620	ev_timer_stop (EV_A_ w);	1811	ev_timer_stop (EV_A_ w);
1621		1812
1622	/* now it's one second after the most recent passwd change */	1813	/* now it's one second after the most recent passwd change */
1623	}	1814	}
1624		1815
1625	static void	1816	static void
1626	stat_cb (EV_P_ ev_stat *w, int revents)	1817	stat_cb (EV_P_ ev_stat *w, int revents)
1627	{	1818	{
1628	/* reset the one-second timer */	1819	/* reset the one-second timer */
1629	ev_timer_again (EV_A_ &timer);	1820	ev_timer_again (EV_A_ &timer);
1630	}	1821	}
1631		1822
1632	...	1823	...
1633	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);	1824	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);
1634	ev_stat_start (loop, &passwd);	1825	ev_stat_start (loop, &passwd);
1635	ev_timer_init (&timer, timer_cb, 0., 1.01);	1826	ev_timer_init (&timer, timer_cb, 0., 1.02);
1636		1827
1637		1828
1638	=head2 C<ev_idle> - when you've got nothing better to do...	1829	=head2 C<ev_idle> - when you've got nothing better to do...
1639		1830
1640	Idle watchers trigger events when no other events of the same or higher	1831	Idle watchers trigger events when no other events of the same or higher
…		…
1671	=head3 Examples	1862	=head3 Examples
1672		1863
1673	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the	1864	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the
1674	callback, free it. Also, use no error checking, as usual.	1865	callback, free it. Also, use no error checking, as usual.
1675		1866
1676	static void	1867	static void
1677	idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)	1868	idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)
1678	{	1869	{
1679	free (w);	1870	free (w);
1680	// now do something you wanted to do when the program has	1871	// now do something you wanted to do when the program has
1681	// no longer asnything immediate to do.	1872	// no longer anything immediate to do.
1682	}	1873	}
1683		1874
1684	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));	1875	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));
1685	ev_idle_init (idle_watcher, idle_cb);	1876	ev_idle_init (idle_watcher, idle_cb);
1686	ev_idle_start (loop, idle_cb);	1877	ev_idle_start (loop, idle_cb);
1687		1878
1688		1879
1689	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!	1880	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!
1690		1881
1691	Prepare and check watchers are usually (but not always) used in tandem:	1882	Prepare and check watchers are usually (but not always) used in tandem:
…		…
1710		1901
1711	This is done by examining in each prepare call which file descriptors need	1902	This is done by examining in each prepare call which file descriptors need
1712	to be watched by the other library, registering C<ev_io> watchers for	1903	to be watched by the other library, registering C<ev_io> watchers for
1713	them and starting an C<ev_timer> watcher for any timeouts (many libraries	1904	them and starting an C<ev_timer> watcher for any timeouts (many libraries
1714	provide just this functionality). Then, in the check watcher you check for	1905	provide just this functionality). Then, in the check watcher you check for
1715	any events that occured (by checking the pending status of all watchers	1906	any events that occurred (by checking the pending status of all watchers
1716	and stopping them) and call back into the library. The I/O and timer	1907	and stopping them) and call back into the library. The I/O and timer
1717	callbacks will never actually be called (but must be valid nevertheless,	1908	callbacks will never actually be called (but must be valid nevertheless,
1718	because you never know, you know?).	1909	because you never know, you know?).
1719		1910
1720	As another example, the Perl Coro module uses these hooks to integrate	1911	As another example, the Perl Coro module uses these hooks to integrate
…		…
1728		1919
1729	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)	1920	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)
1730	priority, to ensure that they are being run before any other watchers	1921	priority, to ensure that they are being run before any other watchers
1731	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,	1922	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,
1732	too) should not activate ("feed") events into libev. While libev fully	1923	too) should not activate ("feed") events into libev. While libev fully
1733	supports this, they will be called before other C<ev_check> watchers	1924	supports this, they might get executed before other C<ev_check> watchers
1734	did their job. As C<ev_check> watchers are often used to embed other	1925	did their job. As C<ev_check> watchers are often used to embed other
1735	(non-libev) event loops those other event loops might be in an unusable	1926	(non-libev) event loops those other event loops might be in an unusable
1736	state until their C<ev_check> watcher ran (always remind yourself to	1927	state until their C<ev_check> watcher ran (always remind yourself to
1737	coexist peacefully with others).	1928	coexist peacefully with others).
1738		1929
…		…
1753	=head3 Examples	1944	=head3 Examples
1754		1945
1755	There are a number of principal ways to embed other event loops or modules	1946	There are a number of principal ways to embed other event loops or modules
1756	into libev. Here are some ideas on how to include libadns into libev	1947	into libev. Here are some ideas on how to include libadns into libev
1757	(there is a Perl module named C<EV::ADNS> that does this, which you could	1948	(there is a Perl module named C<EV::ADNS> that does this, which you could
1758	use for an actually working example. Another Perl module named C<EV::Glib>	1949	use as a working example. Another Perl module named C<EV::Glib> embeds a
1759	embeds a Glib main context into libev, and finally, C<Glib::EV> embeds EV	1950	Glib main context into libev, and finally, C<Glib::EV> embeds EV into the
1760	into the Glib event loop).	1951	Glib event loop).
1761		1952
1762	Method 1: Add IO watchers and a timeout watcher in a prepare handler,	1953	Method 1: Add IO watchers and a timeout watcher in a prepare handler,
1763	and in a check watcher, destroy them and call into libadns. What follows	1954	and in a check watcher, destroy them and call into libadns. What follows
1764	is pseudo-code only of course. This requires you to either use a low	1955	is pseudo-code only of course. This requires you to either use a low
1765	priority for the check watcher or use C<ev_clear_pending> explicitly, as	1956	priority for the check watcher or use C<ev_clear_pending> explicitly, as
1766	the callbacks for the IO/timeout watchers might not have been called yet.	1957	the callbacks for the IO/timeout watchers might not have been called yet.
1767		1958
1768	static ev_io iow [nfd];	1959	static ev_io iow [nfd];
1769	static ev_timer tw;	1960	static ev_timer tw;
1770		1961
1771	static void	1962	static void
1772	io_cb (ev_loop *loop, ev_io *w, int revents)	1963	io_cb (ev_loop *loop, ev_io *w, int revents)
1773	{	1964	{
1774	}	1965	}
1775		1966
1776	// create io watchers for each fd and a timer before blocking	1967	// create io watchers for each fd and a timer before blocking
1777	static void	1968	static void
1778	adns_prepare_cb (ev_loop *loop, ev_prepare *w, int revents)	1969	adns_prepare_cb (ev_loop *loop, ev_prepare *w, int revents)
1779	{	1970	{
1780	int timeout = 3600000;	1971	int timeout = 3600000;
1781	struct pollfd fds [nfd];	1972	struct pollfd fds [nfd];
1782	// actual code will need to loop here and realloc etc.	1973	// actual code will need to loop here and realloc etc.
1783	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));	1974	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
1784		1975
1785	/* the callback is illegal, but won't be called as we stop during check */	1976	/* the callback is illegal, but won't be called as we stop during check */
1786	ev_timer_init (&tw, 0, timeout * 1e-3);	1977	ev_timer_init (&tw, 0, timeout * 1e-3);
1787	ev_timer_start (loop, &tw);	1978	ev_timer_start (loop, &tw);
1788		1979
1789	// create one ev_io per pollfd	1980	// create one ev_io per pollfd
1790	for (int i = 0; i < nfd; ++i)	1981	for (int i = 0; i < nfd; ++i)
1791	{	1982	{
1792	ev_io_init (iow + i, io_cb, fds [i].fd,	1983	ev_io_init (iow + i, io_cb, fds [i].fd,
1793	((fds [i].events & POLLIN ? EV_READ : 0)	1984	((fds [i].events & POLLIN ? EV_READ : 0)
1794	| (fds [i].events & POLLOUT ? EV_WRITE : 0)));	1985	| (fds [i].events & POLLOUT ? EV_WRITE : 0)));
1795		1986
1796	fds [i].revents = 0;	1987	fds [i].revents = 0;
1797	ev_io_start (loop, iow + i);	1988	ev_io_start (loop, iow + i);
1798	}	1989	}
1799	}	1990	}
1800		1991
1801	// stop all watchers after blocking	1992	// stop all watchers after blocking
1802	static void	1993	static void
1803	adns_check_cb (ev_loop *loop, ev_check *w, int revents)	1994	adns_check_cb (ev_loop *loop, ev_check *w, int revents)
1804	{	1995	{
1805	ev_timer_stop (loop, &tw);	1996	ev_timer_stop (loop, &tw);
1806		1997
1807	for (int i = 0; i < nfd; ++i)	1998	for (int i = 0; i < nfd; ++i)
1808	{	1999	{
1809	// set the relevant poll flags	2000	// set the relevant poll flags
1810	// could also call adns_processreadable etc. here	2001	// could also call adns_processreadable etc. here
1811	struct pollfd *fd = fds + i;	2002	struct pollfd *fd = fds + i;
1812	int revents = ev_clear_pending (iow + i);	2003	int revents = ev_clear_pending (iow + i);
1813	if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;	2004	if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;
1814	if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;	2005	if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;
1815		2006
1816	// now stop the watcher	2007	// now stop the watcher
1817	ev_io_stop (loop, iow + i);	2008	ev_io_stop (loop, iow + i);
1818	}	2009	}
1819		2010
1820	adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));	2011	adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));
1821	}	2012	}
1822		2013
1823	Method 2: This would be just like method 1, but you run C<adns_afterpoll>	2014	Method 2: This would be just like method 1, but you run C<adns_afterpoll>
1824	in the prepare watcher and would dispose of the check watcher.	2015	in the prepare watcher and would dispose of the check watcher.
1825		2016
1826	Method 3: If the module to be embedded supports explicit event	2017	Method 3: If the module to be embedded supports explicit event
1827	notification (adns does), you can also make use of the actual watcher	2018	notification (libadns does), you can also make use of the actual watcher
1828	callbacks, and only destroy/create the watchers in the prepare watcher.	2019	callbacks, and only destroy/create the watchers in the prepare watcher.
1829		2020
1830	static void	2021	static void
1831	timer_cb (EV_P_ ev_timer *w, int revents)	2022	timer_cb (EV_P_ ev_timer *w, int revents)
1832	{	2023	{
1833	adns_state ads = (adns_state)w->data;	2024	adns_state ads = (adns_state)w->data;
1834	update_now (EV_A);	2025	update_now (EV_A);
1835		2026
1836	adns_processtimeouts (ads, &tv_now);	2027	adns_processtimeouts (ads, &tv_now);
1837	}	2028	}
1838		2029
1839	static void	2030	static void
1840	io_cb (EV_P_ ev_io *w, int revents)	2031	io_cb (EV_P_ ev_io *w, int revents)
1841	{	2032	{
1842	adns_state ads = (adns_state)w->data;	2033	adns_state ads = (adns_state)w->data;
1843	update_now (EV_A);	2034	update_now (EV_A);
1844		2035
1845	if (revents & EV_READ ) adns_processreadable (ads, w->fd, &tv_now);	2036	if (revents & EV_READ ) adns_processreadable (ads, w->fd, &tv_now);
1846	if (revents & EV_WRITE) adns_processwriteable (ads, w->fd, &tv_now);	2037	if (revents & EV_WRITE) adns_processwriteable (ads, w->fd, &tv_now);
1847	}	2038	}
1848		2039
1849	// do not ever call adns_afterpoll	2040	// do not ever call adns_afterpoll
1850		2041
1851	Method 4: Do not use a prepare or check watcher because the module you	2042	Method 4: Do not use a prepare or check watcher because the module you
1852	want to embed is too inflexible to support it. Instead, youc na override	2043	want to embed is too inflexible to support it. Instead, you can override
1853	their poll function. The drawback with this solution is that the main	2044	their poll function. The drawback with this solution is that the main
1854	loop is now no longer controllable by EV. The C<Glib::EV> module does	2045	loop is now no longer controllable by EV. The C<Glib::EV> module does
1855	this.	2046	this.
1856		2047
1857	static gint	2048	static gint
1858	event_poll_func (GPollFD *fds, guint nfds, gint timeout)	2049	event_poll_func (GPollFD *fds, guint nfds, gint timeout)
1859	{	2050	{
1860	int got_events = 0;	2051	int got_events = 0;
1861		2052
1862	for (n = 0; n < nfds; ++n)	2053	for (n = 0; n < nfds; ++n)
1863	// create/start io watcher that sets the relevant bits in fds[n] and increment got_events	2054	// create/start io watcher that sets the relevant bits in fds[n] and increment got_events
1864		2055
1865	if (timeout >= 0)	2056	if (timeout >= 0)
1866	// create/start timer	2057	// create/start timer
1867		2058
1868	// poll	2059	// poll
1869	ev_loop (EV_A_ 0);	2060	ev_loop (EV_A_ 0);
1870		2061
1871	// stop timer again	2062	// stop timer again
1872	if (timeout >= 0)	2063	if (timeout >= 0)
1873	ev_timer_stop (EV_A_ &to);	2064	ev_timer_stop (EV_A_ &to);
1874		2065
1875	// stop io watchers again - their callbacks should have set	2066	// stop io watchers again - their callbacks should have set
1876	for (n = 0; n < nfds; ++n)	2067	for (n = 0; n < nfds; ++n)
1877	ev_io_stop (EV_A_ iow [n]);	2068	ev_io_stop (EV_A_ iow [n]);
1878		2069
1879	return got_events;	2070	return got_events;
1880	}	2071	}
1881		2072
1882		2073
1883	=head2 C<ev_embed> - when one backend isn't enough...	2074	=head2 C<ev_embed> - when one backend isn't enough...
1884		2075
1885	This is a rather advanced watcher type that lets you embed one event loop	2076	This is a rather advanced watcher type that lets you embed one event loop
…		…
1941		2132
1942	Configures the watcher to embed the given loop, which must be	2133	Configures the watcher to embed the given loop, which must be
1943	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be	2134	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
1944	invoked automatically, otherwise it is the responsibility of the callback	2135	invoked automatically, otherwise it is the responsibility of the callback
1945	to invoke it (it will continue to be called until the sweep has been done,	2136	to invoke it (it will continue to be called until the sweep has been done,
1946	if you do not want thta, you need to temporarily stop the embed watcher).	2137	if you do not want that, you need to temporarily stop the embed watcher).
1947		2138
1948	=item ev_embed_sweep (loop, ev_embed *)	2139	=item ev_embed_sweep (loop, ev_embed *)
1949		2140
1950	Make a single, non-blocking sweep over the embedded loop. This works	2141	Make a single, non-blocking sweep over the embedded loop. This works
1951	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	2142	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
1952	apropriate way for embedded loops.	2143	appropriate way for embedded loops.
1953		2144
1954	=item struct ev_loop *other [read-only]	2145	=item struct ev_loop *other [read-only]
1955		2146
1956	The embedded event loop.	2147	The embedded event loop.
1957		2148
…		…
1959		2150
1960	=head3 Examples	2151	=head3 Examples
1961		2152
1962	Example: Try to get an embeddable event loop and embed it into the default	2153	Example: Try to get an embeddable event loop and embed it into the default
1963	event loop. If that is not possible, use the default loop. The default	2154	event loop. If that is not possible, use the default loop. The default
1964	loop is stored in C<loop_hi>, while the mebeddable loop is stored in	2155	loop is stored in C<loop_hi>, while the embeddable loop is stored in
1965	C<loop_lo> (which is C<loop_hi> in the acse no embeddable loop can be	2156	C<loop_lo> (which is C<loop_hi> in the case no embeddable loop can be
1966	used).	2157	used).
1967		2158
1968	struct ev_loop *loop_hi = ev_default_init (0);	2159	struct ev_loop *loop_hi = ev_default_init (0);
1969	struct ev_loop *loop_lo = 0;	2160	struct ev_loop *loop_lo = 0;
1970	struct ev_embed embed;	2161	struct ev_embed embed;
1971		2162
1972	// see if there is a chance of getting one that works	2163	// see if there is a chance of getting one that works
1973	// (remember that a flags value of 0 means autodetection)	2164	// (remember that a flags value of 0 means autodetection)
1974	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()	2165	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()
1975	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())	2166	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())
1976	: 0;	2167	: 0;
1977		2168
1978	// if we got one, then embed it, otherwise default to loop_hi	2169	// if we got one, then embed it, otherwise default to loop_hi
1979	if (loop_lo)	2170	if (loop_lo)
1980	{	2171	{
1981	ev_embed_init (&embed, 0, loop_lo);	2172	ev_embed_init (&embed, 0, loop_lo);
1982	ev_embed_start (loop_hi, &embed);	2173	ev_embed_start (loop_hi, &embed);
1983	}	2174	}
1984	else	2175	else
1985	loop_lo = loop_hi;	2176	loop_lo = loop_hi;
1986		2177
1987	Example: Check if kqueue is available but not recommended and create	2178	Example: Check if kqueue is available but not recommended and create
1988	a kqueue backend for use with sockets (which usually work with any	2179	a kqueue backend for use with sockets (which usually work with any
1989	kqueue implementation). Store the kqueue/socket-only event loop in	2180	kqueue implementation). Store the kqueue/socket-only event loop in
1990	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).	2181	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
1991		2182
1992	struct ev_loop *loop = ev_default_init (0);	2183	struct ev_loop *loop = ev_default_init (0);
1993	struct ev_loop *loop_socket = 0;	2184	struct ev_loop *loop_socket = 0;
1994	struct ev_embed embed;	2185	struct ev_embed embed;
1995		2186
1996	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)	2187	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
1997	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))	2188	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
1998	{	2189	{
1999	ev_embed_init (&embed, 0, loop_socket);	2190	ev_embed_init (&embed, 0, loop_socket);
2000	ev_embed_start (loop, &embed);	2191	ev_embed_start (loop, &embed);
2001	}	2192	}
2002		2193
2003	if (!loop_socket)	2194	if (!loop_socket)
2004	loop_socket = loop;	2195	loop_socket = loop;
2005		2196
2006	// now use loop_socket for all sockets, and loop for everything else	2197	// now use loop_socket for all sockets, and loop for everything else
2007		2198
2008		2199
2009	=head2 C<ev_fork> - the audacity to resume the event loop after a fork	2200	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
2010		2201
2011	Fork watchers are called when a C<fork ()> was detected (usually because	2202	Fork watchers are called when a C<fork ()> was detected (usually because
…		…
2027	believe me.	2218	believe me.
2028		2219
2029	=back	2220	=back
2030		2221
2031		2222
		2223	=head2 C<ev_async> - how to wake up another event loop
		2224
		2225	In general, you cannot use an C<ev_loop> from multiple threads or other
		2226	asynchronous sources such as signal handlers (as opposed to multiple event
		2227	loops - those are of course safe to use in different threads).
		2228
		2229	Sometimes, however, you need to wake up another event loop you do not
		2230	control, for example because it belongs to another thread. This is what
		2231	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you
		2232	can signal it by calling C<ev_async_send>, which is thread- and signal
		2233	safe.
		2234
		2235	This functionality is very similar to C<ev_signal> watchers, as signals,
		2236	too, are asynchronous in nature, and signals, too, will be compressed
		2237	(i.e. the number of callback invocations may be less than the number of
		2238	C<ev_async_sent> calls).
		2239
		2240	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not
		2241	just the default loop.
		2242
		2243	=head3 Queueing
		2244
		2245	C<ev_async> does not support queueing of data in any way. The reason
		2246	is that the author does not know of a simple (or any) algorithm for a
		2247	multiple-writer-single-reader queue that works in all cases and doesn't
		2248	need elaborate support such as pthreads.
		2249
		2250	That means that if you want to queue data, you have to provide your own
		2251	queue. But at least I can tell you would implement locking around your
		2252	queue:
		2253
		2254	=over 4
		2255
		2256	=item queueing from a signal handler context
		2257
		2258	To implement race-free queueing, you simply add to the queue in the signal
		2259	handler but you block the signal handler in the watcher callback. Here is an example that does that for
		2260	some fictitious SIGUSR1 handler:
		2261
		2262	static ev_async mysig;
		2263
		2264	static void
		2265	sigusr1_handler (void)
		2266	{
		2267	sometype data;
		2268
		2269	// no locking etc.
		2270	queue_put (data);
		2271	ev_async_send (EV_DEFAULT_ &mysig);
		2272	}
		2273
		2274	static void
		2275	mysig_cb (EV_P_ ev_async *w, int revents)
		2276	{
		2277	sometype data;
		2278	sigset_t block, prev;
		2279
		2280	sigemptyset (&block);
		2281	sigaddset (&block, SIGUSR1);
		2282	sigprocmask (SIG_BLOCK, &block, &prev);
		2283
		2284	while (queue_get (&data))
		2285	process (data);
		2286
		2287	if (sigismember (&prev, SIGUSR1)
		2288	sigprocmask (SIG_UNBLOCK, &block, 0);
		2289	}
		2290
		2291	(Note: pthreads in theory requires you to use C<pthread_setmask>
		2292	instead of C<sigprocmask> when you use threads, but libev doesn't do it
		2293	either...).
		2294
		2295	=item queueing from a thread context
		2296
		2297	The strategy for threads is different, as you cannot (easily) block
		2298	threads but you can easily preempt them, so to queue safely you need to
		2299	employ a traditional mutex lock, such as in this pthread example:
		2300
		2301	static ev_async mysig;
		2302	static pthread_mutex_t mymutex = PTHREAD_MUTEX_INITIALIZER;
		2303
		2304	static void
		2305	otherthread (void)
		2306	{
		2307	// only need to lock the actual queueing operation
		2308	pthread_mutex_lock (&mymutex);
		2309	queue_put (data);
		2310	pthread_mutex_unlock (&mymutex);
		2311
		2312	ev_async_send (EV_DEFAULT_ &mysig);
		2313	}
		2314
		2315	static void
		2316	mysig_cb (EV_P_ ev_async *w, int revents)
		2317	{
		2318	pthread_mutex_lock (&mymutex);
		2319
		2320	while (queue_get (&data))
		2321	process (data);
		2322
		2323	pthread_mutex_unlock (&mymutex);
		2324	}
		2325
		2326	=back
		2327
		2328
		2329	=head3 Watcher-Specific Functions and Data Members
		2330
		2331	=over 4
		2332
		2333	=item ev_async_init (ev_async *, callback)
		2334
		2335	Initialises and configures the async watcher - it has no parameters of any
		2336	kind. There is a C<ev_asynd_set> macro, but using it is utterly pointless,
		2337	believe me.
		2338
		2339	=item ev_async_send (loop, ev_async *)
		2340
		2341	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
		2342	an C<EV_ASYNC> event on the watcher into the event loop. Unlike
		2343	C<ev_feed_event>, this call is safe to do in other threads, signal or
		2344	similar contexts (see the discussion of C<EV_ATOMIC_T> in the embedding
		2345	section below on what exactly this means).
		2346
		2347	This call incurs the overhead of a system call only once per loop iteration,
		2348	so while the overhead might be noticeable, it doesn't apply to repeated
		2349	calls to C<ev_async_send>.
		2350
		2351	=item bool = ev_async_pending (ev_async *)
		2352
		2353	Returns a non-zero value when C<ev_async_send> has been called on the
		2354	watcher but the event has not yet been processed (or even noted) by the
		2355	event loop.
		2356
		2357	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When
		2358	the loop iterates next and checks for the watcher to have become active,
		2359	it will reset the flag again. C<ev_async_pending> can be used to very
		2360	quickly check whether invoking the loop might be a good idea.
		2361
		2362	Not that this does I<not> check whether the watcher itself is pending, only
		2363	whether it has been requested to make this watcher pending.
		2364
		2365	=back
		2366
		2367
2032	=head1 OTHER FUNCTIONS	2368	=head1 OTHER FUNCTIONS
2033		2369
2034	There are some other functions of possible interest. Described. Here. Now.	2370	There are some other functions of possible interest. Described. Here. Now.
2035		2371
2036	=over 4	2372	=over 4
…		…
2043	or timeout without having to allocate/configure/start/stop/free one or	2379	or timeout without having to allocate/configure/start/stop/free one or
2044	more watchers yourself.	2380	more watchers yourself.
2045		2381
2046	If C<fd> is less than 0, then no I/O watcher will be started and events	2382	If C<fd> is less than 0, then no I/O watcher will be started and events
2047	is being ignored. Otherwise, an C<ev_io> watcher for the given C<fd> and	2383	is being ignored. Otherwise, an C<ev_io> watcher for the given C<fd> and
2048	C<events> set will be craeted and started.	2384	C<events> set will be created and started.
2049		2385
2050	If C<timeout> is less than 0, then no timeout watcher will be	2386	If C<timeout> is less than 0, then no timeout watcher will be
2051	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and	2387	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
2052	repeat = 0) will be started. While C<0> is a valid timeout, it is of	2388	repeat = 0) will be started. While C<0> is a valid timeout, it is of
2053	dubious value.	2389	dubious value.
…		…
2055	The callback has the type C<void (*cb)(int revents, void *arg)> and gets	2391	The callback has the type C<void (*cb)(int revents, void *arg)> and gets
2056	passed an C<revents> set like normal event callbacks (a combination of	2392	passed an C<revents> set like normal event callbacks (a combination of
2057	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>	2393	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>
2058	value passed to C<ev_once>:	2394	value passed to C<ev_once>:
2059		2395
2060	static void stdin_ready (int revents, void *arg)	2396	static void stdin_ready (int revents, void *arg)
2061	{	2397	{
2062	if (revents & EV_TIMEOUT)	2398	if (revents & EV_TIMEOUT)
2063	/* doh, nothing entered */;	2399	/* doh, nothing entered */;
2064	else if (revents & EV_READ)	2400	else if (revents & EV_READ)
2065	/* stdin might have data for us, joy! */;	2401	/* stdin might have data for us, joy! */;
2066	}	2402	}
2067		2403
2068	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	2404	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
2069		2405
2070	=item ev_feed_event (ev_loop *, watcher *, int revents)	2406	=item ev_feed_event (ev_loop *, watcher *, int revents)
2071		2407
2072	Feeds the given event set into the event loop, as if the specified event	2408	Feeds the given event set into the event loop, as if the specified event
2073	had happened for the specified watcher (which must be a pointer to an	2409	had happened for the specified watcher (which must be a pointer to an
…		…
2078	Feed an event on the given fd, as if a file descriptor backend detected	2414	Feed an event on the given fd, as if a file descriptor backend detected
2079	the given events it.	2415	the given events it.
2080		2416
2081	=item ev_feed_signal_event (ev_loop *loop, int signum)	2417	=item ev_feed_signal_event (ev_loop *loop, int signum)
2082		2418
2083	Feed an event as if the given signal occured (C<loop> must be the default	2419	Feed an event as if the given signal occurred (C<loop> must be the default
2084	loop!).	2420	loop!).
2085		2421
2086	=back	2422	=back
2087		2423
2088		2424
…		…
2104		2440
2105	=item * Priorities are not currently supported. Initialising priorities	2441	=item * Priorities are not currently supported. Initialising priorities
2106	will fail and all watchers will have the same priority, even though there	2442	will fail and all watchers will have the same priority, even though there
2107	is an ev_pri field.	2443	is an ev_pri field.
2108		2444
		2445	=item * In libevent, the last base created gets the signals, in libev, the
		2446	first base created (== the default loop) gets the signals.
		2447
2109	=item * Other members are not supported.	2448	=item * Other members are not supported.
2110		2449
2111	=item * The libev emulation is I<not> ABI compatible to libevent, you need	2450	=item * The libev emulation is I<not> ABI compatible to libevent, you need
2112	to use the libev header file and library.	2451	to use the libev header file and library.
2113		2452
2114	=back	2453	=back
2115		2454
2116	=head1 C++ SUPPORT	2455	=head1 C++ SUPPORT
2117		2456
2118	Libev comes with some simplistic wrapper classes for C++ that mainly allow	2457	Libev comes with some simplistic wrapper classes for C++ that mainly allow
2119	you to use some convinience methods to start/stop watchers and also change	2458	you to use some convenience methods to start/stop watchers and also change
2120	the callback model to a model using method callbacks on objects.	2459	the callback model to a model using method callbacks on objects.
2121		2460
2122	To use it,	2461	To use it,
2123		2462
2124	#include <ev++.h>	2463	#include <ev++.h>
2125		2464
2126	This automatically includes F<ev.h> and puts all of its definitions (many	2465	This automatically includes F<ev.h> and puts all of its definitions (many
2127	of them macros) into the global namespace. All C++ specific things are	2466	of them macros) into the global namespace. All C++ specific things are
2128	put into the C<ev> namespace. It should support all the same embedding	2467	put into the C<ev> namespace. It should support all the same embedding
2129	options as F<ev.h>, most notably C<EV_MULTIPLICITY>.	2468	options as F<ev.h>, most notably C<EV_MULTIPLICITY>.
…		…
2196	your compiler is good :), then the method will be fully inlined into the	2535	your compiler is good :), then the method will be fully inlined into the
2197	thunking function, making it as fast as a direct C callback.	2536	thunking function, making it as fast as a direct C callback.
2198		2537
2199	Example: simple class declaration and watcher initialisation	2538	Example: simple class declaration and watcher initialisation
2200		2539
2201	struct myclass	2540	struct myclass
2202	{	2541	{
2203	void io_cb (ev::io &w, int revents) { }	2542	void io_cb (ev::io &w, int revents) { }
2204	}	2543	}
2205		2544
2206	myclass obj;	2545	myclass obj;
2207	ev::io iow;	2546	ev::io iow;
2208	iow.set <myclass, &myclass::io_cb> (&obj);	2547	iow.set <myclass, &myclass::io_cb> (&obj);
2209		2548
2210	=item w->set<function> (void *data = 0)	2549	=item w->set<function> (void *data = 0)
2211		2550
2212	Also sets a callback, but uses a static method or plain function as	2551	Also sets a callback, but uses a static method or plain function as
2213	callback. The optional C<data> argument will be stored in the watcher's	2552	callback. The optional C<data> argument will be stored in the watcher's
…		…
2217		2556
2218	See the method-C<set> above for more details.	2557	See the method-C<set> above for more details.
2219		2558
2220	Example:	2559	Example:
2221		2560
2222	static void io_cb (ev::io &w, int revents) { }	2561	static void io_cb (ev::io &w, int revents) { }
2223	iow.set <io_cb> ();	2562	iow.set <io_cb> ();
2224		2563
2225	=item w->set (struct ev_loop *)	2564	=item w->set (struct ev_loop *)
2226		2565
2227	Associates a different C<struct ev_loop> with this watcher. You can only	2566	Associates a different C<struct ev_loop> with this watcher. You can only
2228	do this when the watcher is inactive (and not pending either).	2567	do this when the watcher is inactive (and not pending either).
2229		2568
2230	=item w->set ([args])	2569	=item w->set ([arguments])
2231		2570
2232	Basically the same as C<ev_TYPE_set>, with the same args. Must be	2571	Basically the same as C<ev_TYPE_set>, with the same arguments. Must be
2233	called at least once. Unlike the C counterpart, an active watcher gets	2572	called at least once. Unlike the C counterpart, an active watcher gets
2234	automatically stopped and restarted when reconfiguring it with this	2573	automatically stopped and restarted when reconfiguring it with this
2235	method.	2574	method.
2236		2575
2237	=item w->start ()	2576	=item w->start ()
…		…
2261	=back	2600	=back
2262		2601
2263	Example: Define a class with an IO and idle watcher, start one of them in	2602	Example: Define a class with an IO and idle watcher, start one of them in
2264	the constructor.	2603	the constructor.
2265		2604
2266	class myclass	2605	class myclass
2267	{	2606	{
2268	ev_io io; void io_cb (ev::io &w, int revents);	2607	ev::io io; void io_cb (ev::io &w, int revents);
2269	ev_idle idle void idle_cb (ev::idle &w, int revents);	2608	ev:idle idle void idle_cb (ev::idle &w, int revents);
2270		2609
2271	myclass ();	2610	myclass (int fd)
2272	}	2611	{
2273
2274	myclass::myclass (int fd)
2275	{
2276	io .set <myclass, &myclass::io_cb > (this);	2612	io .set <myclass, &myclass::io_cb > (this);
2277	idle.set <myclass, &myclass::idle_cb> (this);	2613	idle.set <myclass, &myclass::idle_cb> (this);
2278		2614
2279	io.start (fd, ev::READ);	2615	io.start (fd, ev::READ);
		2616	}
2280	}	2617	};
		2618
		2619
		2620	=head1 OTHER LANGUAGE BINDINGS
		2621
		2622	Libev does not offer other language bindings itself, but bindings for a
		2623	number of languages exist in the form of third-party packages. If you know
		2624	any interesting language binding in addition to the ones listed here, drop
		2625	me a note.
		2626
		2627	=over 4
		2628
		2629	=item Perl
		2630
		2631	The EV module implements the full libev API and is actually used to test
		2632	libev. EV is developed together with libev. Apart from the EV core module,
		2633	there are additional modules that implement libev-compatible interfaces
		2634	to C<libadns> (C<EV::ADNS>), C<Net::SNMP> (C<Net::SNMP::EV>) and the
		2635	C<libglib> event core (C<Glib::EV> and C<EV::Glib>).
		2636
		2637	It can be found and installed via CPAN, its homepage is at
		2638	L<http://software.schmorp.de/pkg/EV>.
		2639
		2640	=item Python
		2641
		2642	Python bindings can be found at L<http://code.google.com/p/pyev/>. It
		2643	seems to be quite complete and well-documented. Note, however, that the
		2644	patch they require for libev is outright dangerous as it breaks the ABI
		2645	for everybody else, and therefore, should never be applied in an installed
		2646	libev (if python requires an incompatible ABI then it needs to embed
		2647	libev).
		2648
		2649	=item Ruby
		2650
		2651	Tony Arcieri has written a ruby extension that offers access to a subset
		2652	of the libev API and adds file handle abstractions, asynchronous DNS and
		2653	more on top of it. It can be found via gem servers. Its homepage is at
		2654	L<http://rev.rubyforge.org/>.
		2655
		2656	=item D
		2657
		2658	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
		2659	be found at L<http://git.llucax.com.ar/?p=software/ev.d.git;a=summary>.
		2660
		2661	=back
2281		2662
2282		2663
2283	=head1 MACRO MAGIC	2664	=head1 MACRO MAGIC
2284		2665
2285	Libev can be compiled with a variety of options, the most fundamantal	2666	Libev can be compiled with a variety of options, the most fundamental
2286	of which is C<EV_MULTIPLICITY>. This option determines whether (most)	2667	of which is C<EV_MULTIPLICITY>. This option determines whether (most)
2287	functions and callbacks have an initial C<struct ev_loop *> argument.	2668	functions and callbacks have an initial C<struct ev_loop *> argument.
2288		2669
2289	To make it easier to write programs that cope with either variant, the	2670	To make it easier to write programs that cope with either variant, the
2290	following macros are defined:	2671	following macros are defined:
…		…
2295		2676
2296	This provides the loop I<argument> for functions, if one is required ("ev	2677	This provides the loop I<argument> for functions, if one is required ("ev
2297	loop argument"). The C<EV_A> form is used when this is the sole argument,	2678	loop argument"). The C<EV_A> form is used when this is the sole argument,
2298	C<EV_A_> is used when other arguments are following. Example:	2679	C<EV_A_> is used when other arguments are following. Example:
2299		2680
2300	ev_unref (EV_A);	2681	ev_unref (EV_A);
2301	ev_timer_add (EV_A_ watcher);	2682	ev_timer_add (EV_A_ watcher);
2302	ev_loop (EV_A_ 0);	2683	ev_loop (EV_A_ 0);
2303		2684
2304	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,	2685	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
2305	which is often provided by the following macro.	2686	which is often provided by the following macro.
2306		2687
2307	=item C<EV_P>, C<EV_P_>	2688	=item C<EV_P>, C<EV_P_>
2308		2689
2309	This provides the loop I<parameter> for functions, if one is required ("ev	2690	This provides the loop I<parameter> for functions, if one is required ("ev
2310	loop parameter"). The C<EV_P> form is used when this is the sole parameter,	2691	loop parameter"). The C<EV_P> form is used when this is the sole parameter,
2311	C<EV_P_> is used when other parameters are following. Example:	2692	C<EV_P_> is used when other parameters are following. Example:
2312		2693
2313	// this is how ev_unref is being declared	2694	// this is how ev_unref is being declared
2314	static void ev_unref (EV_P);	2695	static void ev_unref (EV_P);
2315		2696
2316	// this is how you can declare your typical callback	2697	// this is how you can declare your typical callback
2317	static void cb (EV_P_ ev_timer *w, int revents)	2698	static void cb (EV_P_ ev_timer *w, int revents)
2318		2699
2319	It declares a parameter C<loop> of type C<struct ev_loop *>, quite	2700	It declares a parameter C<loop> of type C<struct ev_loop *>, quite
2320	suitable for use with C<EV_A>.	2701	suitable for use with C<EV_A>.
2321		2702
2322	=item C<EV_DEFAULT>, C<EV_DEFAULT_>	2703	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
2323		2704
2324	Similar to the other two macros, this gives you the value of the default	2705	Similar to the other two macros, this gives you the value of the default
2325	loop, if multiple loops are supported ("ev loop default").	2706	loop, if multiple loops are supported ("ev loop default").
		2707
		2708	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
		2709
		2710	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
		2711	default loop has been initialised (C<UC> == unchecked). Their behaviour
		2712	is undefined when the default loop has not been initialised by a previous
		2713	execution of C<EV_DEFAULT>, C<EV_DEFAULT_> or C<ev_default_init (...)>.
		2714
		2715	It is often prudent to use C<EV_DEFAULT> when initialising the first
		2716	watcher in a function but use C<EV_DEFAULT_UC> afterwards.
2326		2717
2327	=back	2718	=back
2328		2719
2329	Example: Declare and initialise a check watcher, utilising the above	2720	Example: Declare and initialise a check watcher, utilising the above
2330	macros so it will work regardless of whether multiple loops are supported	2721	macros so it will work regardless of whether multiple loops are supported
2331	or not.	2722	or not.
2332		2723
2333	static void	2724	static void
2334	check_cb (EV_P_ ev_timer *w, int revents)	2725	check_cb (EV_P_ ev_timer *w, int revents)
2335	{	2726	{
2336	ev_check_stop (EV_A_ w);	2727	ev_check_stop (EV_A_ w);
2337	}	2728	}
2338		2729
2339	ev_check check;	2730	ev_check check;
2340	ev_check_init (&check, check_cb);	2731	ev_check_init (&check, check_cb);
2341	ev_check_start (EV_DEFAULT_ &check);	2732	ev_check_start (EV_DEFAULT_ &check);
2342	ev_loop (EV_DEFAULT_ 0);	2733	ev_loop (EV_DEFAULT_ 0);
2343		2734
2344	=head1 EMBEDDING	2735	=head1 EMBEDDING
2345		2736
2346	Libev can (and often is) directly embedded into host	2737	Libev can (and often is) directly embedded into host
2347	applications. Examples of applications that embed it include the Deliantra	2738	applications. Examples of applications that embed it include the Deliantra
…		…
2354	libev somewhere in your source tree).	2745	libev somewhere in your source tree).
2355		2746
2356	=head2 FILESETS	2747	=head2 FILESETS
2357		2748
2358	Depending on what features you need you need to include one or more sets of files	2749	Depending on what features you need you need to include one or more sets of files
2359	in your app.	2750	in your application.
2360		2751
2361	=head3 CORE EVENT LOOP	2752	=head3 CORE EVENT LOOP
2362		2753
2363	To include only the libev core (all the C<ev_*> functions), with manual	2754	To include only the libev core (all the C<ev_*> functions), with manual
2364	configuration (no autoconf):	2755	configuration (no autoconf):
2365		2756
2366	#define EV_STANDALONE 1	2757	#define EV_STANDALONE 1
2367	#include "ev.c"	2758	#include "ev.c"
2368		2759
2369	This will automatically include F<ev.h>, too, and should be done in a	2760	This will automatically include F<ev.h>, too, and should be done in a
2370	single C source file only to provide the function implementations. To use	2761	single C source file only to provide the function implementations. To use
2371	it, do the same for F<ev.h> in all files wishing to use this API (best	2762	it, do the same for F<ev.h> in all files wishing to use this API (best
2372	done by writing a wrapper around F<ev.h> that you can include instead and	2763	done by writing a wrapper around F<ev.h> that you can include instead and
2373	where you can put other configuration options):	2764	where you can put other configuration options):
2374		2765
2375	#define EV_STANDALONE 1	2766	#define EV_STANDALONE 1
2376	#include "ev.h"	2767	#include "ev.h"
2377		2768
2378	Both header files and implementation files can be compiled with a C++	2769	Both header files and implementation files can be compiled with a C++
2379	compiler (at least, thats a stated goal, and breakage will be treated	2770	compiler (at least, thats a stated goal, and breakage will be treated
2380	as a bug).	2771	as a bug).
2381		2772
2382	You need the following files in your source tree, or in a directory	2773	You need the following files in your source tree, or in a directory
2383	in your include path (e.g. in libev/ when using -Ilibev):	2774	in your include path (e.g. in libev/ when using -Ilibev):
2384		2775
2385	ev.h	2776	ev.h
2386	ev.c	2777	ev.c
2387	ev_vars.h	2778	ev_vars.h
2388	ev_wrap.h	2779	ev_wrap.h
2389		2780
2390	ev_win32.c required on win32 platforms only	2781	ev_win32.c required on win32 platforms only
2391		2782
2392	ev_select.c only when select backend is enabled (which is enabled by default)	2783	ev_select.c only when select backend is enabled (which is enabled by default)
2393	ev_poll.c only when poll backend is enabled (disabled by default)	2784	ev_poll.c only when poll backend is enabled (disabled by default)
2394	ev_epoll.c only when the epoll backend is enabled (disabled by default)	2785	ev_epoll.c only when the epoll backend is enabled (disabled by default)
2395	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)	2786	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)
2396	ev_port.c only when the solaris port backend is enabled (disabled by default)	2787	ev_port.c only when the solaris port backend is enabled (disabled by default)
2397		2788
2398	F<ev.c> includes the backend files directly when enabled, so you only need	2789	F<ev.c> includes the backend files directly when enabled, so you only need
2399	to compile this single file.	2790	to compile this single file.
2400		2791
2401	=head3 LIBEVENT COMPATIBILITY API	2792	=head3 LIBEVENT COMPATIBILITY API
2402		2793
2403	To include the libevent compatibility API, also include:	2794	To include the libevent compatibility API, also include:
2404		2795
2405	#include "event.c"	2796	#include "event.c"
2406		2797
2407	in the file including F<ev.c>, and:	2798	in the file including F<ev.c>, and:
2408		2799
2409	#include "event.h"	2800	#include "event.h"
2410		2801
2411	in the files that want to use the libevent API. This also includes F<ev.h>.	2802	in the files that want to use the libevent API. This also includes F<ev.h>.
2412		2803
2413	You need the following additional files for this:	2804	You need the following additional files for this:
2414		2805
2415	event.h	2806	event.h
2416	event.c	2807	event.c
2417		2808
2418	=head3 AUTOCONF SUPPORT	2809	=head3 AUTOCONF SUPPORT
2419		2810
2420	Instead of using C<EV_STANDALONE=1> and providing your config in	2811	Instead of using C<EV_STANDALONE=1> and providing your configuration in
2421	whatever way you want, you can also C<m4_include([libev.m4])> in your	2812	whatever way you want, you can also C<m4_include([libev.m4])> in your
2422	F<configure.ac> and leave C<EV_STANDALONE> undefined. F<ev.c> will then	2813	F<configure.ac> and leave C<EV_STANDALONE> undefined. F<ev.c> will then
2423	include F<config.h> and configure itself accordingly.	2814	include F<config.h> and configure itself accordingly.
2424		2815
2425	For this of course you need the m4 file:	2816	For this of course you need the m4 file:
2426		2817
2427	libev.m4	2818	libev.m4
2428		2819
2429	=head2 PREPROCESSOR SYMBOLS/MACROS	2820	=head2 PREPROCESSOR SYMBOLS/MACROS
2430		2821
2431	Libev can be configured via a variety of preprocessor symbols you have to define	2822	Libev can be configured via a variety of preprocessor symbols you have to
2432	before including any of its files. The default is not to build for multiplicity	2823	define before including any of its files. The default in the absence of
2433	and only include the select backend.	2824	autoconf is noted for every option.
2434		2825
2435	=over 4	2826	=over 4
2436		2827
2437	=item EV_STANDALONE	2828	=item EV_STANDALONE
2438		2829
…		…
2443	F<event.h> that are not directly supported by the libev core alone.	2834	F<event.h> that are not directly supported by the libev core alone.
2444		2835
2445	=item EV_USE_MONOTONIC	2836	=item EV_USE_MONOTONIC
2446		2837
2447	If defined to be C<1>, libev will try to detect the availability of the	2838	If defined to be C<1>, libev will try to detect the availability of the
2448	monotonic clock option at both compiletime and runtime. Otherwise no use	2839	monotonic clock option at both compile time and runtime. Otherwise no use
2449	of the monotonic clock option will be attempted. If you enable this, you	2840	of the monotonic clock option will be attempted. If you enable this, you
2450	usually have to link against librt or something similar. Enabling it when	2841	usually have to link against librt or something similar. Enabling it when
2451	the functionality isn't available is safe, though, although you have	2842	the functionality isn't available is safe, though, although you have
2452	to make sure you link against any libraries where the C<clock_gettime>	2843	to make sure you link against any libraries where the C<clock_gettime>
2453	function is hiding in (often F<-lrt>).	2844	function is hiding in (often F<-lrt>).
2454		2845
2455	=item EV_USE_REALTIME	2846	=item EV_USE_REALTIME
2456		2847
2457	If defined to be C<1>, libev will try to detect the availability of the	2848	If defined to be C<1>, libev will try to detect the availability of the
2458	realtime clock option at compiletime (and assume its availability at	2849	real-time clock option at compile time (and assume its availability at
2459	runtime if successful). Otherwise no use of the realtime clock option will	2850	runtime if successful). Otherwise no use of the real-time clock option will
2460	be attempted. This effectively replaces C<gettimeofday> by C<clock_get	2851	be attempted. This effectively replaces C<gettimeofday> by C<clock_get
2461	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See the	2852	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See the
2462	note about libraries in the description of C<EV_USE_MONOTONIC>, though.	2853	note about libraries in the description of C<EV_USE_MONOTONIC>, though.
2463		2854
2464	=item EV_USE_NANOSLEEP	2855	=item EV_USE_NANOSLEEP
2465		2856
2466	If defined to be C<1>, libev will assume that C<nanosleep ()> is available	2857	If defined to be C<1>, libev will assume that C<nanosleep ()> is available
2467	and will use it for delays. Otherwise it will use C<select ()>.	2858	and will use it for delays. Otherwise it will use C<select ()>.
2468		2859
		2860	=item EV_USE_EVENTFD
		2861
		2862	If defined to be C<1>, then libev will assume that C<eventfd ()> is
		2863	available and will probe for kernel support at runtime. This will improve
		2864	C<ev_signal> and C<ev_async> performance and reduce resource consumption.
		2865	If undefined, it will be enabled if the headers indicate GNU/Linux + Glibc
		2866	2.7 or newer, otherwise disabled.
		2867
2469	=item EV_USE_SELECT	2868	=item EV_USE_SELECT
2470		2869
2471	If undefined or defined to be C<1>, libev will compile in support for the	2870	If undefined or defined to be C<1>, libev will compile in support for the
2472	C<select>(2) backend. No attempt at autodetection will be done: if no	2871	C<select>(2) backend. No attempt at auto-detection will be done: if no
2473	other method takes over, select will be it. Otherwise the select backend	2872	other method takes over, select will be it. Otherwise the select backend
2474	will not be compiled in.	2873	will not be compiled in.
2475		2874
2476	=item EV_SELECT_USE_FD_SET	2875	=item EV_SELECT_USE_FD_SET
2477		2876
2478	If defined to C<1>, then the select backend will use the system C<fd_set>	2877	If defined to C<1>, then the select backend will use the system C<fd_set>
2479	structure. This is useful if libev doesn't compile due to a missing	2878	structure. This is useful if libev doesn't compile due to a missing
2480	C<NFDBITS> or C<fd_mask> definition or it misguesses the bitset layout on	2879	C<NFDBITS> or C<fd_mask> definition or it mis-guesses the bitset layout on
2481	exotic systems. This usually limits the range of file descriptors to some	2880	exotic systems. This usually limits the range of file descriptors to some
2482	low limit such as 1024 or might have other limitations (winsocket only	2881	low limit such as 1024 or might have other limitations (winsocket only
2483	allows 64 sockets). The C<FD_SETSIZE> macro, set before compilation, might	2882	allows 64 sockets). The C<FD_SETSIZE> macro, set before compilation, might
2484	influence the size of the C<fd_set> used.	2883	influence the size of the C<fd_set> used.
2485		2884
…		…
2491	be used is the winsock select). This means that it will call	2890	be used is the winsock select). This means that it will call
2492	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	2891	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
2493	it is assumed that all these functions actually work on fds, even	2892	it is assumed that all these functions actually work on fds, even
2494	on win32. Should not be defined on non-win32 platforms.	2893	on win32. Should not be defined on non-win32 platforms.
2495		2894
		2895	=item EV_FD_TO_WIN32_HANDLE
		2896
		2897	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
		2898	file descriptors to socket handles. When not defining this symbol (the
		2899	default), then libev will call C<_get_osfhandle>, which is usually
		2900	correct. In some cases, programs use their own file descriptor management,
		2901	in which case they can provide this function to map fds to socket handles.
		2902
2496	=item EV_USE_POLL	2903	=item EV_USE_POLL
2497		2904
2498	If defined to be C<1>, libev will compile in support for the C<poll>(2)	2905	If defined to be C<1>, libev will compile in support for the C<poll>(2)
2499	backend. Otherwise it will be enabled on non-win32 platforms. It	2906	backend. Otherwise it will be enabled on non-win32 platforms. It
2500	takes precedence over select.	2907	takes precedence over select.
2501		2908
2502	=item EV_USE_EPOLL	2909	=item EV_USE_EPOLL
2503		2910
2504	If defined to be C<1>, libev will compile in support for the Linux	2911	If defined to be C<1>, libev will compile in support for the Linux
2505	C<epoll>(7) backend. Its availability will be detected at runtime,	2912	C<epoll>(7) backend. Its availability will be detected at runtime,
2506	otherwise another method will be used as fallback. This is the	2913	otherwise another method will be used as fallback. This is the preferred
2507	preferred backend for GNU/Linux systems.	2914	backend for GNU/Linux systems. If undefined, it will be enabled if the
		2915	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
2508		2916
2509	=item EV_USE_KQUEUE	2917	=item EV_USE_KQUEUE
2510		2918
2511	If defined to be C<1>, libev will compile in support for the BSD style	2919	If defined to be C<1>, libev will compile in support for the BSD style
2512	C<kqueue>(2) backend. Its actual availability will be detected at runtime,	2920	C<kqueue>(2) backend. Its actual availability will be detected at runtime,
…		…
2525	otherwise another method will be used as fallback. This is the preferred	2933	otherwise another method will be used as fallback. This is the preferred
2526	backend for Solaris 10 systems.	2934	backend for Solaris 10 systems.
2527		2935
2528	=item EV_USE_DEVPOLL	2936	=item EV_USE_DEVPOLL
2529		2937
2530	reserved for future expansion, works like the USE symbols above.	2938	Reserved for future expansion, works like the USE symbols above.
2531		2939
2532	=item EV_USE_INOTIFY	2940	=item EV_USE_INOTIFY
2533		2941
2534	If defined to be C<1>, libev will compile in support for the Linux inotify	2942	If defined to be C<1>, libev will compile in support for the Linux inotify
2535	interface to speed up C<ev_stat> watchers. Its actual availability will	2943	interface to speed up C<ev_stat> watchers. Its actual availability will
2536	be detected at runtime.	2944	be detected at runtime. If undefined, it will be enabled if the headers
		2945	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
		2946
		2947	=item EV_ATOMIC_T
		2948
		2949	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
		2950	access is atomic with respect to other threads or signal contexts. No such
		2951	type is easily found in the C language, so you can provide your own type
		2952	that you know is safe for your purposes. It is used both for signal handler "locking"
		2953	as well as for signal and thread safety in C<ev_async> watchers.
		2954
		2955	In the absence of this define, libev will use C<sig_atomic_t volatile>
		2956	(from F<signal.h>), which is usually good enough on most platforms.
2537		2957
2538	=item EV_H	2958	=item EV_H
2539		2959
2540	The name of the F<ev.h> header file used to include it. The default if	2960	The name of the F<ev.h> header file used to include it. The default if
2541	undefined is C<"ev.h"> in F<event.h> and F<ev.c>. This can be used to	2961	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
2542	virtually rename the F<ev.h> header file in case of conflicts.	2962	used to virtually rename the F<ev.h> header file in case of conflicts.
2543		2963
2544	=item EV_CONFIG_H	2964	=item EV_CONFIG_H
2545		2965
2546	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	2966	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
2547	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	2967	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
2548	C<EV_H>, above.	2968	C<EV_H>, above.
2549		2969
2550	=item EV_EVENT_H	2970	=item EV_EVENT_H
2551		2971
2552	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	2972	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
2553	of how the F<event.h> header can be found, the dfeault is C<"event.h">.	2973	of how the F<event.h> header can be found, the default is C<"event.h">.
2554		2974
2555	=item EV_PROTOTYPES	2975	=item EV_PROTOTYPES
2556		2976
2557	If defined to be C<0>, then F<ev.h> will not define any function	2977	If defined to be C<0>, then F<ev.h> will not define any function
2558	prototypes, but still define all the structs and other symbols. This is	2978	prototypes, but still define all the structs and other symbols. This is
…		…
2579	When doing priority-based operations, libev usually has to linearly search	2999	When doing priority-based operations, libev usually has to linearly search
2580	all the priorities, so having many of them (hundreds) uses a lot of space	3000	all the priorities, so having many of them (hundreds) uses a lot of space
2581	and time, so using the defaults of five priorities (-2 .. +2) is usually	3001	and time, so using the defaults of five priorities (-2 .. +2) is usually
2582	fine.	3002	fine.
2583		3003
2584	If your embedding app does not need any priorities, defining these both to	3004	If your embedding application does not need any priorities, defining these both to
2585	C<0> will save some memory and cpu.	3005	C<0> will save some memory and CPU.
2586		3006
2587	=item EV_PERIODIC_ENABLE	3007	=item EV_PERIODIC_ENABLE
2588		3008
2589	If undefined or defined to be C<1>, then periodic timers are supported. If	3009	If undefined or defined to be C<1>, then periodic timers are supported. If
2590	defined to be C<0>, then they are not. Disabling them saves a few kB of	3010	defined to be C<0>, then they are not. Disabling them saves a few kB of
…		…
2609	=item EV_FORK_ENABLE	3029	=item EV_FORK_ENABLE
2610		3030
2611	If undefined or defined to be C<1>, then fork watchers are supported. If	3031	If undefined or defined to be C<1>, then fork watchers are supported. If
2612	defined to be C<0>, then they are not.	3032	defined to be C<0>, then they are not.
2613		3033
		3034	=item EV_ASYNC_ENABLE
		3035
		3036	If undefined or defined to be C<1>, then async watchers are supported. If
		3037	defined to be C<0>, then they are not.
		3038
2614	=item EV_MINIMAL	3039	=item EV_MINIMAL
2615		3040
2616	If you need to shave off some kilobytes of code at the expense of some	3041	If you need to shave off some kilobytes of code at the expense of some
2617	speed, define this symbol to C<1>. Currently only used for gcc to override	3042	speed, define this symbol to C<1>. Currently this is used to override some
2618	some inlining decisions, saves roughly 30% codesize of amd64.	3043	inlining decisions, saves roughly 30% code size on amd64. It also selects a
		3044	much smaller 2-heap for timer management over the default 4-heap.
2619		3045
2620	=item EV_PID_HASHSIZE	3046	=item EV_PID_HASHSIZE
2621		3047
2622	C<ev_child> watchers use a small hash table to distribute workload by	3048	C<ev_child> watchers use a small hash table to distribute workload by
2623	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	3049	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more
…		…
2630	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	3056	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),
2631	usually more than enough. If you need to manage thousands of C<ev_stat>	3057	usually more than enough. If you need to manage thousands of C<ev_stat>
2632	watchers you might want to increase this value (I<must> be a power of	3058	watchers you might want to increase this value (I<must> be a power of
2633	two).	3059	two).
2634		3060
		3061	=item EV_USE_4HEAP
		3062
		3063	Heaps are not very cache-efficient. To improve the cache-efficiency of the
		3064	timer and periodics heap, libev uses a 4-heap when this symbol is defined
		3065	to C<1>. The 4-heap uses more complicated (longer) code but has
		3066	noticeably faster performance with many (thousands) of watchers.
		3067
		3068	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>
		3069	(disabled).
		3070
		3071	=item EV_HEAP_CACHE_AT
		3072
		3073	Heaps are not very cache-efficient. To improve the cache-efficiency of the
		3074	timer and periodics heap, libev can cache the timestamp (I<at>) within
		3075	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
		3076	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
		3077	but avoids random read accesses on heap changes. This improves performance
		3078	noticeably with with many (hundreds) of watchers.
		3079
		3080	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>
		3081	(disabled).
		3082
		3083	=item EV_VERIFY
		3084
		3085	Controls how much internal verification (see C<ev_loop_verify ()>) will
		3086	be done: If set to C<0>, no internal verification code will be compiled
		3087	in. If set to C<1>, then verification code will be compiled in, but not
		3088	called. If set to C<2>, then the internal verification code will be
		3089	called once per loop, which can slow down libev. If set to C<3>, then the
		3090	verification code will be called very frequently, which will slow down
		3091	libev considerably.
		3092
		3093	The default is C<1>, unless C<EV_MINIMAL> is set, in which case it will be
		3094	C<0.>
		3095
2635	=item EV_COMMON	3096	=item EV_COMMON
2636		3097
2637	By default, all watchers have a C<void *data> member. By redefining	3098	By default, all watchers have a C<void *data> member. By redefining
2638	this macro to a something else you can include more and other types of	3099	this macro to a something else you can include more and other types of
2639	members. You have to define it each time you include one of the files,	3100	members. You have to define it each time you include one of the files,
2640	though, and it must be identical each time.	3101	though, and it must be identical each time.
2641		3102
2642	For example, the perl EV module uses something like this:	3103	For example, the perl EV module uses something like this:
2643		3104
2644	#define EV_COMMON \	3105	#define EV_COMMON \
2645	SV *self; /* contains this struct */ \	3106	SV *self; /* contains this struct */ \
2646	SV *cb_sv, *fh /* note no trailing ";" */	3107	SV *cb_sv, *fh /* note no trailing ";" */
2647		3108
2648	=item EV_CB_DECLARE (type)	3109	=item EV_CB_DECLARE (type)
2649		3110
2650	=item EV_CB_INVOKE (watcher, revents)	3111	=item EV_CB_INVOKE (watcher, revents)
2651		3112
…		…
2658	avoid the C<struct ev_loop *> as first argument in all cases, or to use	3119	avoid the C<struct ev_loop *> as first argument in all cases, or to use
2659	method calls instead of plain function calls in C++.	3120	method calls instead of plain function calls in C++.
2660		3121
2661	=head2 EXPORTED API SYMBOLS	3122	=head2 EXPORTED API SYMBOLS
2662		3123
2663	If you need to re-export the API (e.g. via a dll) and you need a list of	3124	If you need to re-export the API (e.g. via a DLL) and you need a list of
2664	exported symbols, you can use the provided F<Symbol.*> files which list	3125	exported symbols, you can use the provided F<Symbol.*> files which list
2665	all public symbols, one per line:	3126	all public symbols, one per line:
2666		3127
2667	Symbols.ev for libev proper	3128	Symbols.ev for libev proper
2668	Symbols.event for the libevent emulation	3129	Symbols.event for the libevent emulation
2669		3130
2670	This can also be used to rename all public symbols to avoid clashes with	3131	This can also be used to rename all public symbols to avoid clashes with
2671	multiple versions of libev linked together (which is obviously bad in	3132	multiple versions of libev linked together (which is obviously bad in
2672	itself, but sometimes it is inconvinient to avoid this).	3133	itself, but sometimes it is inconvenient to avoid this).
2673		3134
2674	A sed command like this will create wrapper C<#define>'s that you need to	3135	A sed command like this will create wrapper C<#define>'s that you need to
2675	include before including F<ev.h>:	3136	include before including F<ev.h>:
2676		3137
2677	<Symbols.ev sed -e "s/.*/#define & myprefix_&/" >wrap.h	3138	<Symbols.ev sed -e "s/.*/#define & myprefix_&/" >wrap.h
…		…
2694	file.	3155	file.
2695		3156
2696	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	3157	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
2697	that everybody includes and which overrides some configure choices:	3158	that everybody includes and which overrides some configure choices:
2698		3159
2699	#define EV_MINIMAL 1	3160	#define EV_MINIMAL 1
2700	#define EV_USE_POLL 0	3161	#define EV_USE_POLL 0
2701	#define EV_MULTIPLICITY 0	3162	#define EV_MULTIPLICITY 0
2702	#define EV_PERIODIC_ENABLE 0	3163	#define EV_PERIODIC_ENABLE 0
2703	#define EV_STAT_ENABLE 0	3164	#define EV_STAT_ENABLE 0
2704	#define EV_FORK_ENABLE 0	3165	#define EV_FORK_ENABLE 0
2705	#define EV_CONFIG_H <config.h>	3166	#define EV_CONFIG_H <config.h>
2706	#define EV_MINPRI 0	3167	#define EV_MINPRI 0
2707	#define EV_MAXPRI 0	3168	#define EV_MAXPRI 0
2708		3169
2709	#include "ev++.h"	3170	#include "ev++.h"
2710		3171
2711	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	3172	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
2712		3173
2713	#include "ev_cpp.h"	3174	#include "ev_cpp.h"
2714	#include "ev.c"	3175	#include "ev.c"
		3176
		3177
		3178	=head1 THREADS AND COROUTINES
		3179
		3180	=head2 THREADS
		3181
		3182	Libev itself is completely thread-safe, but it uses no locking. This
		3183	means that you can use as many loops as you want in parallel, as long as
		3184	only one thread ever calls into one libev function with the same loop
		3185	parameter.
		3186
		3187	Or put differently: calls with different loop parameters can be done in
		3188	parallel from multiple threads, calls with the same loop parameter must be
		3189	done serially (but can be done from different threads, as long as only one
		3190	thread ever is inside a call at any point in time, e.g. by using a mutex
		3191	per loop).
		3192
		3193	If you want to know which design (one loop, locking, or multiple loops
		3194	without or something else still) is best for your problem, then I cannot
		3195	help you. I can give some generic advice however:
		3196
		3197	=over 4
		3198
		3199	=item * most applications have a main thread: use the default libev loop
		3200	in that thread, or create a separate thread running only the default loop.
		3201
		3202	This helps integrating other libraries or software modules that use libev
		3203	themselves and don't care/know about threading.
		3204
		3205	=item * one loop per thread is usually a good model.
		3206
		3207	Doing this is almost never wrong, sometimes a better-performance model
		3208	exists, but it is always a good start.
		3209
		3210	=item * other models exist, such as the leader/follower pattern, where one
		3211	loop is handed through multiple threads in a kind of round-robin fashion.
		3212
		3213	Choosing a model is hard - look around, learn, know that usually you can do
		3214	better than you currently do :-)
		3215
		3216	=item * often you need to talk to some other thread which blocks in the
		3217	event loop - C<ev_async> watchers can be used to wake them up from other
		3218	threads safely (or from signal contexts...).
		3219
		3220	=back
		3221
		3222	=head2 COROUTINES
		3223
		3224	Libev is much more accommodating to coroutines ("cooperative threads"):
		3225	libev fully supports nesting calls to it's functions from different
		3226	coroutines (e.g. you can call C<ev_loop> on the same loop from two
		3227	different coroutines and switch freely between both coroutines running the
		3228	loop, as long as you don't confuse yourself). The only exception is that
		3229	you must not do this from C<ev_periodic> reschedule callbacks.
		3230
		3231	Care has been invested into making sure that libev does not keep local
		3232	state inside C<ev_loop>, and other calls do not usually allow coroutine
		3233	switches.
2715		3234
2716		3235
2717	=head1 COMPLEXITIES	3236	=head1 COMPLEXITIES
2718		3237
2719	In this section the complexities of (many of) the algorithms used inside	3238	In this section the complexities of (many of) the algorithms used inside
…		…
2737	=item Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)	3256	=item Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)
2738		3257
2739	That means that changing a timer costs less than removing/adding them	3258	That means that changing a timer costs less than removing/adding them
2740	as only the relative motion in the event queue has to be paid for.	3259	as only the relative motion in the event queue has to be paid for.
2741		3260
2742	=item Starting io/check/prepare/idle/signal/child watchers: O(1)	3261	=item Starting io/check/prepare/idle/signal/child/fork/async watchers: O(1)
2743		3262
2744	These just add the watcher into an array or at the head of a list.	3263	These just add the watcher into an array or at the head of a list.
2745		3264
2746	=item Stopping check/prepare/idle watchers: O(1)	3265	=item Stopping check/prepare/idle/fork/async watchers: O(1)
2747		3266
2748	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))	3267	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
2749		3268
2750	These watchers are stored in lists then need to be walked to find the	3269	These watchers are stored in lists then need to be walked to find the
2751	correct watcher to remove. The lists are usually short (you don't usually	3270	correct watcher to remove. The lists are usually short (you don't usually
2752	have many watchers waiting for the same fd or signal).	3271	have many watchers waiting for the same fd or signal).
2753		3272
2754	=item Finding the next timer in each loop iteration: O(1)	3273	=item Finding the next timer in each loop iteration: O(1)
2755		3274
2756	By virtue of using a binary heap, the next timer is always found at the	3275	By virtue of using a binary or 4-heap, the next timer is always found at a
2757	beginning of the storage array.	3276	fixed position in the storage array.
2758		3277
2759	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)	3278	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
2760		3279
2761	A change means an I/O watcher gets started or stopped, which requires	3280	A change means an I/O watcher gets started or stopped, which requires
2762	libev to recalculate its status (and possibly tell the kernel, depending	3281	libev to recalculate its status (and possibly tell the kernel, depending
2763	on backend and wether C<ev_io_set> was used).	3282	on backend and whether C<ev_io_set> was used).
2764		3283
2765	=item Activating one watcher (putting it into the pending state): O(1)	3284	=item Activating one watcher (putting it into the pending state): O(1)
2766		3285
2767	=item Priority handling: O(number_of_priorities)	3286	=item Priority handling: O(number_of_priorities)
2768		3287
2769	Priorities are implemented by allocating some space for each	3288	Priorities are implemented by allocating some space for each
2770	priority. When doing priority-based operations, libev usually has to	3289	priority. When doing priority-based operations, libev usually has to
2771	linearly search all the priorities, but starting/stopping and activating	3290	linearly search all the priorities, but starting/stopping and activating
2772	watchers becomes O(1) w.r.t. prioritiy handling.	3291	watchers becomes O(1) w.r.t. priority handling.
		3292
		3293	=item Sending an ev_async: O(1)
		3294
		3295	=item Processing ev_async_send: O(number_of_async_watchers)
		3296
		3297	=item Processing signals: O(max_signal_number)
		3298
		3299	Sending involves a system call I<iff> there were no other C<ev_async_send>
		3300	calls in the current loop iteration. Checking for async and signal events
		3301	involves iterating over all running async watchers or all signal numbers.
2773		3302
2774	=back	3303	=back
2775		3304
2776		3305
		3306	=head1 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
		3307
		3308	Win32 doesn't support any of the standards (e.g. POSIX) that libev
		3309	requires, and its I/O model is fundamentally incompatible with the POSIX
		3310	model. Libev still offers limited functionality on this platform in
		3311	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
		3312	descriptors. This only applies when using Win32 natively, not when using
		3313	e.g. cygwin.
		3314
		3315	Lifting these limitations would basically require the full
		3316	re-implementation of the I/O system. If you are into these kinds of
		3317	things, then note that glib does exactly that for you in a very portable
		3318	way (note also that glib is the slowest event library known to man).
		3319
		3320	There is no supported compilation method available on windows except
		3321	embedding it into other applications.
		3322
		3323	Not a libev limitation but worth mentioning: windows apparently doesn't
		3324	accept large writes: instead of resulting in a partial write, windows will
		3325	either accept everything or return C<ENOBUFS> if the buffer is too large,
		3326	so make sure you only write small amounts into your sockets (less than a
		3327	megabyte seems safe, but thsi apparently depends on the amount of memory
		3328	available).
		3329
		3330	Due to the many, low, and arbitrary limits on the win32 platform and
		3331	the abysmal performance of winsockets, using a large number of sockets
		3332	is not recommended (and not reasonable). If your program needs to use
		3333	more than a hundred or so sockets, then likely it needs to use a totally
		3334	different implementation for windows, as libev offers the POSIX readiness
		3335	notification model, which cannot be implemented efficiently on windows
		3336	(Microsoft monopoly games).
		3337
		3338	A typical way to use libev under windows is to embed it (see the embedding
		3339	section for details) and use the following F<evwrap.h> header file instead
		3340	of F<ev.h>:
		3341
		3342	#define EV_STANDALONE /* keeps ev from requiring config.h */
		3343	#define EV_SELECT_IS_WINSOCKET 1 /* configure libev for windows select */
		3344
		3345	#include "ev.h"
		3346
		3347	And compile the following F<evwrap.c> file into your project (make sure
		3348	you do I<not> compile the F<ev.c> or any other embedded soruce files!):
		3349
		3350	#include "evwrap.h"
		3351	#include "ev.c"
		3352
		3353	=over 4
		3354
		3355	=item The winsocket select function
		3356
		3357	The winsocket C<select> function doesn't follow POSIX in that it
		3358	requires socket I<handles> and not socket I<file descriptors> (it is
		3359	also extremely buggy). This makes select very inefficient, and also
		3360	requires a mapping from file descriptors to socket handles (the Microsoft
		3361	C runtime provides the function C<_open_osfhandle> for this). See the
		3362	discussion of the C<EV_SELECT_USE_FD_SET>, C<EV_SELECT_IS_WINSOCKET> and
		3363	C<EV_FD_TO_WIN32_HANDLE> preprocessor symbols for more info.
		3364
		3365	The configuration for a "naked" win32 using the Microsoft runtime
		3366	libraries and raw winsocket select is:
		3367
		3368	#define EV_USE_SELECT 1
		3369	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
		3370
		3371	Note that winsockets handling of fd sets is O(n), so you can easily get a
		3372	complexity in the O(n²) range when using win32.
		3373
		3374	=item Limited number of file descriptors
		3375
		3376	Windows has numerous arbitrary (and low) limits on things.
		3377
		3378	Early versions of winsocket's select only supported waiting for a maximum
		3379	of C<64> handles (probably owning to the fact that all windows kernels
		3380	can only wait for C<64> things at the same time internally; Microsoft
		3381	recommends spawning a chain of threads and wait for 63 handles and the
		3382	previous thread in each. Great).
		3383
		3384	Newer versions support more handles, but you need to define C<FD_SETSIZE>
		3385	to some high number (e.g. C<2048>) before compiling the winsocket select
		3386	call (which might be in libev or elsewhere, for example, perl does its own
		3387	select emulation on windows).
		3388
		3389	Another limit is the number of file descriptors in the Microsoft runtime
		3390	libraries, which by default is C<64> (there must be a hidden I<64> fetish
		3391	or something like this inside Microsoft). You can increase this by calling
		3392	C<_setmaxstdio>, which can increase this limit to C<2048> (another
		3393	arbitrary limit), but is broken in many versions of the Microsoft runtime
		3394	libraries.
		3395
		3396	This might get you to about C<512> or C<2048> sockets (depending on
		3397	windows version and/or the phase of the moon). To get more, you need to
		3398	wrap all I/O functions and provide your own fd management, but the cost of
		3399	calling select (O(n²)) will likely make this unworkable.
		3400
		3401	=back
		3402
		3403
		3404	=head1 PORTABILITY REQUIREMENTS
		3405
		3406	In addition to a working ISO-C implementation, libev relies on a few
		3407	additional extensions:
		3408
		3409	=over 4
		3410
		3411	=item C<void (*)(ev_watcher_type *, int revents)> must have compatible
		3412	calling conventions regardless of C<ev_watcher_type *>.
		3413
		3414	Libev assumes not only that all watcher pointers have the same internal
		3415	structure (guaranteed by POSIX but not by ISO C for example), but it also
		3416	assumes that the same (machine) code can be used to call any watcher
		3417	callback: The watcher callbacks have different type signatures, but libev
		3418	calls them using an C<ev_watcher *> internally.
		3419
		3420	=item C<sig_atomic_t volatile> must be thread-atomic as well
		3421
		3422	The type C<sig_atomic_t volatile> (or whatever is defined as
		3423	C<EV_ATOMIC_T>) must be atomic w.r.t. accesses from different
		3424	threads. This is not part of the specification for C<sig_atomic_t>, but is
		3425	believed to be sufficiently portable.
		3426
		3427	=item C<sigprocmask> must work in a threaded environment
		3428
		3429	Libev uses C<sigprocmask> to temporarily block signals. This is not
		3430	allowed in a threaded program (C<pthread_sigmask> has to be used). Typical
		3431	pthread implementations will either allow C<sigprocmask> in the "main
		3432	thread" or will block signals process-wide, both behaviours would
		3433	be compatible with libev. Interaction between C<sigprocmask> and
		3434	C<pthread_sigmask> could complicate things, however.
		3435
		3436	The most portable way to handle signals is to block signals in all threads
		3437	except the initial one, and run the default loop in the initial thread as
		3438	well.
		3439
		3440	=item C<long> must be large enough for common memory allocation sizes
		3441
		3442	To improve portability and simplify using libev, libev uses C<long>
		3443	internally instead of C<size_t> when allocating its data structures. On
		3444	non-POSIX systems (Microsoft...) this might be unexpectedly low, but
		3445	is still at least 31 bits everywhere, which is enough for hundreds of
		3446	millions of watchers.
		3447
		3448	=item C<double> must hold a time value in seconds with enough accuracy
		3449
		3450	The type C<double> is used to represent timestamps. It is required to
		3451	have at least 51 bits of mantissa (and 9 bits of exponent), which is good
		3452	enough for at least into the year 4000. This requirement is fulfilled by
		3453	implementations implementing IEEE 754 (basically all existing ones).
		3454
		3455	=back
		3456
		3457	If you know of other additional requirements drop me a note.
		3458
		3459
		3460	=head1 COMPILER WARNINGS
		3461
		3462	Depending on your compiler and compiler settings, you might get no or a
		3463	lot of warnings when compiling libev code. Some people are apparently
		3464	scared by this.
		3465
		3466	However, these are unavoidable for many reasons. For one, each compiler
		3467	has different warnings, and each user has different tastes regarding
		3468	warning options. "Warn-free" code therefore cannot be a goal except when
		3469	targeting a specific compiler and compiler-version.
		3470
		3471	Another reason is that some compiler warnings require elaborate
		3472	workarounds, or other changes to the code that make it less clear and less
		3473	maintainable.
		3474
		3475	And of course, some compiler warnings are just plain stupid, or simply
		3476	wrong (because they don't actually warn about the condition their message
		3477	seems to warn about).
		3478
		3479	While libev is written to generate as few warnings as possible,
		3480	"warn-free" code is not a goal, and it is recommended not to build libev
		3481	with any compiler warnings enabled unless you are prepared to cope with
		3482	them (e.g. by ignoring them). Remember that warnings are just that:
		3483	warnings, not errors, or proof of bugs.
		3484
		3485
		3486	=head1 VALGRIND
		3487
		3488	Valgrind has a special section here because it is a popular tool that is
		3489	highly useful, but valgrind reports are very hard to interpret.
		3490
		3491	If you think you found a bug (memory leak, uninitialised data access etc.)
		3492	in libev, then check twice: If valgrind reports something like:
		3493
		3494	==2274== definitely lost: 0 bytes in 0 blocks.
		3495	==2274== possibly lost: 0 bytes in 0 blocks.
		3496	==2274== still reachable: 256 bytes in 1 blocks.
		3497
		3498	Then there is no memory leak. Similarly, under some circumstances,
		3499	valgrind might report kernel bugs as if it were a bug in libev, or it
		3500	might be confused (it is a very good tool, but only a tool).
		3501
		3502	If you are unsure about something, feel free to contact the mailing list
		3503	with the full valgrind report and an explanation on why you think this is
		3504	a bug in libev. However, don't be annoyed when you get a brisk "this is
		3505	no bug" answer and take the chance of learning how to interpret valgrind
		3506	properly.
		3507
		3508	If you need, for some reason, empty reports from valgrind for your project
		3509	I suggest using suppression lists.
		3510
		3511
2777	=head1 AUTHOR	3512	=head1 AUTHOR
2778		3513
2779	Marc Lehmann <libev@schmorp.de>.	3514	Marc Lehmann <libev@schmorp.de>.
2780		3515

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines