ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.41 by root, Sat Nov 24 10:19:14 2007 UTC vs.
Revision 1.183 by root, Tue Sep 23 08:37:38 2008 UTC

…		…
2		2
3	libev - a high performance full-featured event loop written in C	3	libev - a high performance full-featured event loop written in C
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	#include <ev.h>	7	#include <ev.h>
		8
		9	=head2 EXAMPLE PROGRAM
		10
		11	// a single header file is required
		12	#include <ev.h>
		13
		14	// every watcher type has its own typedef'd struct
		15	// with the name ev_<type>
		16	ev_io stdin_watcher;
		17	ev_timer timeout_watcher;
		18
		19	// all watcher callbacks have a similar signature
		20	// this callback is called when data is readable on stdin
		21	static void
		22	stdin_cb (EV_P_ struct ev_io *w, int revents)
		23	{
		24	puts ("stdin ready");
		25	// for one-shot events, one must manually stop the watcher
		26	// with its corresponding stop function.
		27	ev_io_stop (EV_A_ w);
		28
		29	// this causes all nested ev_loop's to stop iterating
		30	ev_unloop (EV_A_ EVUNLOOP_ALL);
		31	}
		32
		33	// another callback, this time for a time-out
		34	static void
		35	timeout_cb (EV_P_ struct ev_timer *w, int revents)
		36	{
		37	puts ("timeout");
		38	// this causes the innermost ev_loop to stop iterating
		39	ev_unloop (EV_A_ EVUNLOOP_ONE);
		40	}
		41
		42	int
		43	main (void)
		44	{
		45	// use the default event loop unless you have special needs
		46	struct ev_loop *loop = ev_default_loop (0);
		47
		48	// initialise an io watcher, then start it
		49	// this one will watch for stdin to become readable
		50	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
		51	ev_io_start (loop, &stdin_watcher);
		52
		53	// initialise a timer watcher, then start it
		54	// simple non-repeating 5.5 second timeout
		55	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
		56	ev_timer_start (loop, &timeout_watcher);
		57
		58	// now wait for events to arrive
		59	ev_loop (loop, 0);
		60
		61	// unloop was called, so exit
		62	return 0;
		63	}
8		64
9	=head1 DESCRIPTION	65	=head1 DESCRIPTION
10		66
		67	The newest version of this document is also available as an html-formatted
		68	web page you might find easier to navigate when reading it for the first
		69	time: L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.
		70
11	Libev is an event loop: you register interest in certain events (such as a	71	Libev is an event loop: you register interest in certain events (such as a
12	file descriptor being readable or a timeout occuring), and it will manage	72	file descriptor being readable or a timeout occurring), and it will manage
13	these event sources and provide your program with events.	73	these event sources and provide your program with events.
14		74
15	To do this, it must take more or less complete control over your process	75	To do this, it must take more or less complete control over your process
16	(or thread) by executing the I<event loop> handler, and will then	76	(or thread) by executing the I<event loop> handler, and will then
17	communicate events via a callback mechanism.	77	communicate events via a callback mechanism.
…		…
19	You register interest in certain events by registering so-called I<event	79	You register interest in certain events by registering so-called I<event
20	watchers>, which are relatively small C structures you initialise with the	80	watchers>, which are relatively small C structures you initialise with the
21	details of the event, and then hand it over to libev by I<starting> the	81	details of the event, and then hand it over to libev by I<starting> the
22	watcher.	82	watcher.
23		83
24	=head1 FEATURES	84	=head2 FEATURES
25		85
26	Libev supports select, poll, the linux-specific epoll and the bsd-specific	86	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
27	kqueue mechanisms for file descriptor events, relative timers, absolute	87	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
28	timers with customised rescheduling, signal events, process status change	88	for file descriptor events (C<ev_io>), the Linux C<inotify> interface
29	events (related to SIGCHLD), and event watchers dealing with the event	89	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers
30	loop mechanism itself (idle, prepare and check watchers). It also is quite	90	with customised rescheduling (C<ev_periodic>), synchronous signals
		91	(C<ev_signal>), process status change events (C<ev_child>), and event
		92	watchers dealing with the event loop mechanism itself (C<ev_idle>,
		93	C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as
		94	file watchers (C<ev_stat>) and even limited support for fork events
		95	(C<ev_fork>).
		96
		97	It also is quite fast (see this
31	fast (see this L<benchmark|http://libev.schmorp.de/bench.html> comparing	98	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
32	it to libevent for example).	99	for example).
33		100
34	=head1 CONVENTIONS	101	=head2 CONVENTIONS
35		102
36	Libev is very configurable. In this manual the default configuration	103	Libev is very configurable. In this manual the default (and most common)
37	will be described, which supports multiple event loops. For more info	104	configuration will be described, which supports multiple event loops. For
38	about various configuration options please have a look at the file	105	more info about various configuration options please have a look at
39	F<README.embed> in the libev distribution. If libev was configured without	106	B<EMBED> section in this manual. If libev was configured without support
40	support for multiple event loops, then all functions taking an initial	107	for multiple event loops, then all functions taking an initial argument of
41	argument of name C<loop> (which is always of type C<struct ev_loop *>)	108	name C<loop> (which is always of type C<struct ev_loop *>) will not have
42	will not have this argument.	109	this argument.
43		110
44	=head1 TIME REPRESENTATION	111	=head2 TIME REPRESENTATION
45		112
46	Libev represents time as a single floating point number, representing the	113	Libev represents time as a single floating point number, representing the
47	(fractional) number of seconds since the (POSIX) epoch (somewhere near	114	(fractional) number of seconds since the (POSIX) epoch (somewhere near
48	the beginning of 1970, details are complicated, don't ask). This type is	115	the beginning of 1970, details are complicated, don't ask). This type is
49	called C<ev_tstamp>, which is what you should use too. It usually aliases	116	called C<ev_tstamp>, which is what you should use too. It usually aliases
50	to the C<double> type in C, and when you need to do any calculations on	117	to the C<double> type in C, and when you need to do any calculations on
51	it, you should treat it as such.	118	it, you should treat it as some floating point value. Unlike the name
		119	component C<stamp> might indicate, it is also used for time differences
		120	throughout libev.
		121
		122	=head1 ERROR HANDLING
		123
		124	Libev knows three classes of errors: operating system errors, usage errors
		125	and internal errors (bugs).
		126
		127	When libev catches an operating system error it cannot handle (for example
		128	a system call indicating a condition libev cannot fix), it calls the callback
		129	set via C<ev_set_syserr_cb>, which is supposed to fix the problem or
		130	abort. The default is to print a diagnostic message and to call C<abort
		131	()>.
		132
		133	When libev detects a usage error such as a negative timer interval, then
		134	it will print a diagnostic message and abort (via the C<assert> mechanism,
		135	so C<NDEBUG> will disable this checking): these are programming errors in
		136	the libev caller and need to be fixed there.
		137
		138	Libev also has a few internal error-checking C<assert>ions, and also has
		139	extensive consistency checking code. These do not trigger under normal
		140	circumstances, as they indicate either a bug in libev or worse.
52		141
53		142
54	=head1 GLOBAL FUNCTIONS	143	=head1 GLOBAL FUNCTIONS
55		144
56	These functions can be called anytime, even before initialising the	145	These functions can be called anytime, even before initialising the
…		…
62		151
63	Returns the current time as libev would use it. Please note that the	152	Returns the current time as libev would use it. Please note that the
64	C<ev_now> function is usually faster and also often returns the timestamp	153	C<ev_now> function is usually faster and also often returns the timestamp
65	you actually want to know.	154	you actually want to know.
66		155
		156	=item ev_sleep (ev_tstamp interval)
		157
		158	Sleep for the given interval: The current thread will be blocked until
		159	either it is interrupted or the given time interval has passed. Basically
		160	this is a sub-second-resolution C<sleep ()>.
		161
67	=item int ev_version_major ()	162	=item int ev_version_major ()
68		163
69	=item int ev_version_minor ()	164	=item int ev_version_minor ()
70		165
71	You can find out the major and minor version numbers of the library	166	You can find out the major and minor ABI version numbers of the library
72	you linked against by calling the functions C<ev_version_major> and	167	you linked against by calling the functions C<ev_version_major> and
73	C<ev_version_minor>. If you want, you can compare against the global	168	C<ev_version_minor>. If you want, you can compare against the global
74	symbols C<EV_VERSION_MAJOR> and C<EV_VERSION_MINOR>, which specify the	169	symbols C<EV_VERSION_MAJOR> and C<EV_VERSION_MINOR>, which specify the
75	version of the library your program was compiled against.	170	version of the library your program was compiled against.
76		171
		172	These version numbers refer to the ABI version of the library, not the
		173	release version.
		174
77	Usually, it's a good idea to terminate if the major versions mismatch,	175	Usually, it's a good idea to terminate if the major versions mismatch,
78	as this indicates an incompatible change. Minor versions are usually	176	as this indicates an incompatible change. Minor versions are usually
79	compatible to older versions, so a larger minor version alone is usually	177	compatible to older versions, so a larger minor version alone is usually
80	not a problem.	178	not a problem.
81		179
82	Example: make sure we haven't accidentally been linked against the wrong	180	Example: Make sure we haven't accidentally been linked against the wrong
83	version:	181	version.
84		182
85	assert (("libev version mismatch",	183	assert (("libev version mismatch",
86	ev_version_major () == EV_VERSION_MAJOR	184	ev_version_major () == EV_VERSION_MAJOR
87	&& ev_version_minor () >= EV_VERSION_MINOR));	185	&& ev_version_minor () >= EV_VERSION_MINOR));
88		186
89	=item unsigned int ev_supported_backends ()	187	=item unsigned int ev_supported_backends ()
90		188
91	Return the set of all backends (i.e. their corresponding C<EV_BACKEND_*>	189	Return the set of all backends (i.e. their corresponding C<EV_BACKEND_*>
92	value) compiled into this binary of libev (independent of their	190	value) compiled into this binary of libev (independent of their
…		…
94	a description of the set values.	192	a description of the set values.
95		193
96	Example: make sure we have the epoll method, because yeah this is cool and	194	Example: make sure we have the epoll method, because yeah this is cool and
97	a must have and can we have a torrent of it please!!!11	195	a must have and can we have a torrent of it please!!!11
98		196
99	assert (("sorry, no epoll, no sex",	197	assert (("sorry, no epoll, no sex",
100	ev_supported_backends () & EVBACKEND_EPOLL));	198	ev_supported_backends () & EVBACKEND_EPOLL));
101		199
102	=item unsigned int ev_recommended_backends ()	200	=item unsigned int ev_recommended_backends ()
103		201
104	Return the set of all backends compiled into this binary of libev and also	202	Return the set of all backends compiled into this binary of libev and also
105	recommended for this platform. This set is often smaller than the one	203	recommended for this platform. This set is often smaller than the one
106	returned by C<ev_supported_backends>, as for example kqueue is broken on	204	returned by C<ev_supported_backends>, as for example kqueue is broken on
107	most BSDs and will not be autodetected unless you explicitly request it	205	most BSDs and will not be auto-detected unless you explicitly request it
108	(assuming you know what you are doing). This is the set of backends that	206	(assuming you know what you are doing). This is the set of backends that
109	libev will probe for if you specify no backends explicitly.	207	libev will probe for if you specify no backends explicitly.
110		208
111	=item unsigned int ev_embeddable_backends ()	209	=item unsigned int ev_embeddable_backends ()
112		210
…		…
118		216
119	See the description of C<ev_embed> watchers for more info.	217	See the description of C<ev_embed> watchers for more info.
120		218
121	=item ev_set_allocator (void *(*cb)(void *ptr, long size))	219	=item ev_set_allocator (void *(*cb)(void *ptr, long size))
122		220
123	Sets the allocation function to use (the prototype is similar to the	221	Sets the allocation function to use (the prototype is similar - the
124	realloc C function, the semantics are identical). It is used to allocate	222	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
125	and free memory (no surprises here). If it returns zero when memory	223	used to allocate and free memory (no surprises here). If it returns zero
126	needs to be allocated, the library might abort or take some potentially	224	when memory needs to be allocated (C<size != 0>), the library might abort
127	destructive action. The default is your system realloc function.	225	or take some potentially destructive action.
		226
		227	Since some systems (at least OpenBSD and Darwin) fail to implement
		228	correct C<realloc> semantics, libev will use a wrapper around the system
		229	C<realloc> and C<free> functions by default.
128		230
129	You could override this function in high-availability programs to, say,	231	You could override this function in high-availability programs to, say,
130	free some memory if it cannot allocate memory, to use a special allocator,	232	free some memory if it cannot allocate memory, to use a special allocator,
131	or even to sleep a while and retry until some memory is available.	233	or even to sleep a while and retry until some memory is available.
132		234
133	Example: replace the libev allocator with one that waits a bit and then	235	Example: Replace the libev allocator with one that waits a bit and then
134	retries: better than mine).	236	retries (example requires a standards-compliant C<realloc>).
135		237
136	static void *	238	static void *
137	persistent_realloc (void *ptr, long size)	239	persistent_realloc (void *ptr, size_t size)
138	{	240	{
139	for (;;)	241	for (;;)
140	{	242	{
141	void *newptr = realloc (ptr, size);	243	void *newptr = realloc (ptr, size);
142		244
…		…
150	...	252	...
151	ev_set_allocator (persistent_realloc);	253	ev_set_allocator (persistent_realloc);
152		254
153	=item ev_set_syserr_cb (void (*cb)(const char *msg));	255	=item ev_set_syserr_cb (void (*cb)(const char *msg));
154		256
155	Set the callback function to call on a retryable syscall error (such	257	Set the callback function to call on a retryable system call error (such
156	as failed select, poll, epoll_wait). The message is a printable string	258	as failed select, poll, epoll_wait). The message is a printable string
157	indicating the system call or subsystem causing the problem. If this	259	indicating the system call or subsystem causing the problem. If this
158	callback is set, then libev will expect it to remedy the sitution, no	260	callback is set, then libev will expect it to remedy the situation, no
159	matter what, when it returns. That is, libev will generally retry the	261	matter what, when it returns. That is, libev will generally retry the
160	requested operation, or, if the condition doesn't go away, do bad stuff	262	requested operation, or, if the condition doesn't go away, do bad stuff
161	(such as abort).	263	(such as abort).
162		264
163	Example: do the same thing as libev does internally:	265	Example: This is basically the same thing that libev does internally, too.
164		266
165	static void	267	static void
166	fatal_error (const char *msg)	268	fatal_error (const char *msg)
167	{	269	{
168	perror (msg);	270	perror (msg);
…		…
178		280
179	An event loop is described by a C<struct ev_loop *>. The library knows two	281	An event loop is described by a C<struct ev_loop *>. The library knows two
180	types of such loops, the I<default> loop, which supports signals and child	282	types of such loops, the I<default> loop, which supports signals and child
181	events, and dynamically created loops which do not.	283	events, and dynamically created loops which do not.
182		284
183	If you use threads, a common model is to run the default event loop
184	in your main thread (or in a separate thread) and for each thread you
185	create, you also create another event loop. Libev itself does no locking
186	whatsoever, so if you mix calls to the same event loop in different
187	threads, make sure you lock (this is usually a bad idea, though, even if
188	done correctly, because it's hideous and inefficient).
189
190	=over 4	285	=over 4
191		286
192	=item struct ev_loop *ev_default_loop (unsigned int flags)	287	=item struct ev_loop *ev_default_loop (unsigned int flags)
193		288
194	This will initialise the default event loop if it hasn't been initialised	289	This will initialise the default event loop if it hasn't been initialised
…		…
197	flags. If that is troubling you, check C<ev_backend ()> afterwards).	292	flags. If that is troubling you, check C<ev_backend ()> afterwards).
198		293
199	If you don't know what event loop to use, use the one returned from this	294	If you don't know what event loop to use, use the one returned from this
200	function.	295	function.
201		296
		297	Note that this function is I<not> thread-safe, so if you want to use it
		298	from multiple threads, you have to lock (note also that this is unlikely,
		299	as loops cannot bes hared easily between threads anyway).
		300
		301	The default loop is the only loop that can handle C<ev_signal> and
		302	C<ev_child> watchers, and to do this, it always registers a handler
		303	for C<SIGCHLD>. If this is a problem for your application you can either
		304	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you
		305	can simply overwrite the C<SIGCHLD> signal handler I<after> calling
		306	C<ev_default_init>.
		307
202	The flags argument can be used to specify special behaviour or specific	308	The flags argument can be used to specify special behaviour or specific
203	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	309	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
204		310
205	The following flags are supported:	311	The following flags are supported:
206		312
…		…
211	The default flags value. Use this if you have no clue (it's the right	317	The default flags value. Use this if you have no clue (it's the right
212	thing, believe me).	318	thing, believe me).
213		319
214	=item C<EVFLAG_NOENV>	320	=item C<EVFLAG_NOENV>
215		321
216	If this flag bit is ored into the flag value (or the program runs setuid	322	If this flag bit is or'ed into the flag value (or the program runs setuid
217	or setgid) then libev will I<not> look at the environment variable	323	or setgid) then libev will I<not> look at the environment variable
218	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will	324	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will
219	override the flags completely if it is found in the environment. This is	325	override the flags completely if it is found in the environment. This is
220	useful to try out specific backends to test their performance, or to work	326	useful to try out specific backends to test their performance, or to work
221	around bugs.	327	around bugs.
222		328
		329	=item C<EVFLAG_FORKCHECK>
		330
		331	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after
		332	a fork, you can also make libev check for a fork in each iteration by
		333	enabling this flag.
		334
		335	This works by calling C<getpid ()> on every iteration of the loop,
		336	and thus this might slow down your event loop if you do a lot of loop
		337	iterations and little real work, but is usually not noticeable (on my
		338	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence
		339	without a system call and thus I<very> fast, but my GNU/Linux system also has
		340	C<pthread_atfork> which is even faster).
		341
		342	The big advantage of this flag is that you can forget about fork (and
		343	forget about forgetting to tell libev about forking) when you use this
		344	flag.
		345
		346	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>
		347	environment variable.
		348
223	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	349	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
224		350
225	This is your standard select(2) backend. Not I<completely> standard, as	351	This is your standard select(2) backend. Not I<completely> standard, as
226	libev tries to roll its own fd_set with no limits on the number of fds,	352	libev tries to roll its own fd_set with no limits on the number of fds,
227	but if that fails, expect a fairly low limit on the number of fds when	353	but if that fails, expect a fairly low limit on the number of fds when
228	using this backend. It doesn't scale too well (O(highest_fd)), but its usually	354	using this backend. It doesn't scale too well (O(highest_fd)), but its
229	the fastest backend for a low number of fds.	355	usually the fastest backend for a low number of (low-numbered :) fds.
		356
		357	To get good performance out of this backend you need a high amount of
		358	parallelism (most of the file descriptors should be busy). If you are
		359	writing a server, you should C<accept ()> in a loop to accept as many
		360	connections as possible during one iteration. You might also want to have
		361	a look at C<ev_set_io_collect_interval ()> to increase the amount of
		362	readiness notifications you get per iteration.
		363
		364	This backend maps C<EV_READ> to the C<readfds> set and C<EV_WRITE> to the
		365	C<writefds> set (and to work around Microsoft Windows bugs, also onto the
		366	C<exceptfds> set on that platform).
230		367
231	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)	368	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)
232		369
233	And this is your standard poll(2) backend. It's more complicated than	370	And this is your standard poll(2) backend. It's more complicated
234	select, but handles sparse fds better and has no artificial limit on the	371	than select, but handles sparse fds better and has no artificial
235	number of fds you can use (except it will slow down considerably with a	372	limit on the number of fds you can use (except it will slow down
236	lot of inactive fds). It scales similarly to select, i.e. O(total_fds).	373	considerably with a lot of inactive fds). It scales similarly to select,
		374	i.e. O(total_fds). See the entry for C<EVBACKEND_SELECT>, above, for
		375	performance tips.
		376
		377	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and
		378	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.
237		379
238	=item C<EVBACKEND_EPOLL> (value 4, Linux)	380	=item C<EVBACKEND_EPOLL> (value 4, Linux)
239		381
240	For few fds, this backend is a bit little slower than poll and select,	382	For few fds, this backend is a bit little slower than poll and select,
241	but it scales phenomenally better. While poll and select usually scale like	383	but it scales phenomenally better. While poll and select usually scale
242	O(total_fds) where n is the total number of fds (or the highest fd), epoll scales	384	like O(total_fds) where n is the total number of fds (or the highest fd),
243	either O(1) or O(active_fds).	385	epoll scales either O(1) or O(active_fds). The epoll design has a number
		386	of shortcomings, such as silently dropping events in some hard-to-detect
		387	cases and requiring a system call per fd change, no fork support and bad
		388	support for dup.
244		389
245	While stopping and starting an I/O watcher in the same iteration will	390	While stopping, setting and starting an I/O watcher in the same iteration
246	result in some caching, there is still a syscall per such incident	391	will result in some caching, there is still a system call per such incident
247	(because the fd could point to a different file description now), so its	392	(because the fd could point to a different file description now), so its
248	best to avoid that. Also, dup()ed file descriptors might not work very	393	best to avoid that. Also, C<dup ()>'ed file descriptors might not work
249	well if you register events for both fds.	394	very well if you register events for both fds.
250		395
251	Please note that epoll sometimes generates spurious notifications, so you	396	Please note that epoll sometimes generates spurious notifications, so you
252	need to use non-blocking I/O or other means to avoid blocking when no data	397	need to use non-blocking I/O or other means to avoid blocking when no data
253	(or space) is available.	398	(or space) is available.
254		399
		400	Best performance from this backend is achieved by not unregistering all
		401	watchers for a file descriptor until it has been closed, if possible,
		402	i.e. keep at least one watcher active per fd at all times. Stopping and
		403	starting a watcher (without re-setting it) also usually doesn't cause
		404	extra overhead.
		405
		406	While nominally embeddable in other event loops, this feature is broken in
		407	all kernel versions tested so far.
		408
		409	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
		410	C<EVBACKEND_POLL>.
		411
255	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	412	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
256		413
257	Kqueue deserves special mention, as at the time of this writing, it	414	Kqueue deserves special mention, as at the time of this writing, it was
258	was broken on all BSDs except NetBSD (usually it doesn't work with	415	broken on all BSDs except NetBSD (usually it doesn't work reliably with
259	anything but sockets and pipes, except on Darwin, where of course its	416	anything but sockets and pipes, except on Darwin, where of course it's
260	completely useless). For this reason its not being "autodetected"	417	completely useless). For this reason it's not being "auto-detected" unless
261	unless you explicitly specify it explicitly in the flags (i.e. using	418	you explicitly specify it in the flags (i.e. using C<EVBACKEND_KQUEUE>) or
262	C<EVBACKEND_KQUEUE>).	419	libev was compiled on a known-to-be-good (-enough) system like NetBSD.
		420
		421	You still can embed kqueue into a normal poll or select backend and use it
		422	only for sockets (after having made sure that sockets work with kqueue on
		423	the target platform). See C<ev_embed> watchers for more info.
263		424
264	It scales in the same way as the epoll backend, but the interface to the	425	It scales in the same way as the epoll backend, but the interface to the
265	kernel is more efficient (which says nothing about its actual speed, of	426	kernel is more efficient (which says nothing about its actual speed, of
266	course). While starting and stopping an I/O watcher does not cause an	427	course). While stopping, setting and starting an I/O watcher does never
267	extra syscall as with epoll, it still adds up to four event changes per	428	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to
268	incident, so its best to avoid that.	429	two event changes per incident. Support for C<fork ()> is very bad and it
		430	drops fds silently in similarly hard-to-detect cases.
		431
		432	This backend usually performs well under most conditions.
		433
		434	While nominally embeddable in other event loops, this doesn't work
		435	everywhere, so you might need to test for this. And since it is broken
		436	almost everywhere, you should only use it when you have a lot of sockets
		437	(for which it usually works), by embedding it into another event loop
		438	(e.g. C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>) and, did I mention it,
		439	using it only for sockets.
		440
		441	This backend maps C<EV_READ> into an C<EVFILT_READ> kevent with
		442	C<NOTE_EOF>, and C<EV_WRITE> into an C<EVFILT_WRITE> kevent with
		443	C<NOTE_EOF>.
269		444
270	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)	445	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)
271		446
272	This is not implemented yet (and might never be).	447	This is not implemented yet (and might never be, unless you send me an
		448	implementation). According to reports, C</dev/poll> only supports sockets
		449	and is not embeddable, which would limit the usefulness of this backend
		450	immensely.
273		451
274	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	452	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
275		453
276	This uses the Solaris 10 port mechanism. As with everything on Solaris,	454	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
277	it's really slow, but it still scales very well (O(active_fds)).	455	it's really slow, but it still scales very well (O(active_fds)).
278		456
279	Please note that solaris ports can result in a lot of spurious	457	Please note that Solaris event ports can deliver a lot of spurious
280	notifications, so you need to use non-blocking I/O or other means to avoid	458	notifications, so you need to use non-blocking I/O or other means to avoid
281	blocking when no data (or space) is available.	459	blocking when no data (or space) is available.
		460
		461	While this backend scales well, it requires one system call per active
		462	file descriptor per loop iteration. For small and medium numbers of file
		463	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
		464	might perform better.
		465
		466	On the positive side, with the exception of the spurious readiness
		467	notifications, this backend actually performed fully to specification
		468	in all tests and is fully embeddable, which is a rare feat among the
		469	OS-specific backends.
		470
		471	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
		472	C<EVBACKEND_POLL>.
282		473
283	=item C<EVBACKEND_ALL>	474	=item C<EVBACKEND_ALL>
284		475
285	Try all backends (even potentially broken ones that wouldn't be tried	476	Try all backends (even potentially broken ones that wouldn't be tried
286	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	477	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
287	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	478	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
288		479
		480	It is definitely not recommended to use this flag.
		481
289	=back	482	=back
290		483
291	If one or more of these are ored into the flags value, then only these	484	If one or more of these are or'ed into the flags value, then only these
292	backends will be tried (in the reverse order as given here). If none are	485	backends will be tried (in the reverse order as listed here). If none are
293	specified, most compiled-in backend will be tried, usually in reverse	486	specified, all backends in C<ev_recommended_backends ()> will be tried.
294	order of their flag values :)
295		487
296	The most typical usage is like this:	488	Example: This is the most typical usage.
297		489
298	if (!ev_default_loop (0))	490	if (!ev_default_loop (0))
299	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");	491	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
300		492
301	Restrict libev to the select and poll backends, and do not allow	493	Example: Restrict libev to the select and poll backends, and do not allow
302	environment settings to be taken into account:	494	environment settings to be taken into account:
303		495
304	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);	496	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
305		497
306	Use whatever libev has to offer, but make sure that kqueue is used if	498	Example: Use whatever libev has to offer, but make sure that kqueue is
307	available (warning, breaks stuff, best use only with your own private	499	used if available (warning, breaks stuff, best use only with your own
308	event loop and only if you know the OS supports your types of fds):	500	private event loop and only if you know the OS supports your types of
		501	fds):
309		502
310	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);	503	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
311		504
312	=item struct ev_loop *ev_loop_new (unsigned int flags)	505	=item struct ev_loop *ev_loop_new (unsigned int flags)
313		506
314	Similar to C<ev_default_loop>, but always creates a new event loop that is	507	Similar to C<ev_default_loop>, but always creates a new event loop that is
315	always distinct from the default loop. Unlike the default loop, it cannot	508	always distinct from the default loop. Unlike the default loop, it cannot
316	handle signal and child watchers, and attempts to do so will be greeted by	509	handle signal and child watchers, and attempts to do so will be greeted by
317	undefined behaviour (or a failed assertion if assertions are enabled).	510	undefined behaviour (or a failed assertion if assertions are enabled).
318		511
		512	Note that this function I<is> thread-safe, and the recommended way to use
		513	libev with threads is indeed to create one loop per thread, and using the
		514	default loop in the "main" or "initial" thread.
		515
319	Example: try to create a event loop that uses epoll and nothing else.	516	Example: Try to create a event loop that uses epoll and nothing else.
320		517
321	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	518	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
322	if (!epoller)	519	if (!epoller)
323	fatal ("no epoll found here, maybe it hides under your chair");	520	fatal ("no epoll found here, maybe it hides under your chair");
324		521
325	=item ev_default_destroy ()	522	=item ev_default_destroy ()
326		523
327	Destroys the default loop again (frees all memory and kernel state	524	Destroys the default loop again (frees all memory and kernel state
328	etc.). None of the active event watchers will be stopped in the normal	525	etc.). None of the active event watchers will be stopped in the normal
329	sense, so e.g. C<ev_is_active> might still return true. It is your	526	sense, so e.g. C<ev_is_active> might still return true. It is your
330	responsibility to either stop all watchers cleanly yoursef I<before>	527	responsibility to either stop all watchers cleanly yourself I<before>
331	calling this function, or cope with the fact afterwards (which is usually	528	calling this function, or cope with the fact afterwards (which is usually
332	the easiest thing, youc na just ignore the watchers and/or C<free ()> them	529	the easiest thing, you can just ignore the watchers and/or C<free ()> them
333	for example).	530	for example).
		531
		532	Note that certain global state, such as signal state, will not be freed by
		533	this function, and related watchers (such as signal and child watchers)
		534	would need to be stopped manually.
		535
		536	In general it is not advisable to call this function except in the
		537	rare occasion where you really need to free e.g. the signal handling
		538	pipe fds. If you need dynamically allocated loops it is better to use
		539	C<ev_loop_new> and C<ev_loop_destroy>).
334		540
335	=item ev_loop_destroy (loop)	541	=item ev_loop_destroy (loop)
336		542
337	Like C<ev_default_destroy>, but destroys an event loop created by an	543	Like C<ev_default_destroy>, but destroys an event loop created by an
338	earlier call to C<ev_loop_new>.	544	earlier call to C<ev_loop_new>.
339		545
340	=item ev_default_fork ()	546	=item ev_default_fork ()
341		547
		548	This function sets a flag that causes subsequent C<ev_loop> iterations
342	This function reinitialises the kernel state for backends that have	549	to reinitialise the kernel state for backends that have one. Despite the
343	one. Despite the name, you can call it anytime, but it makes most sense	550	name, you can call it anytime, but it makes most sense after forking, in
344	after forking, in either the parent or child process (or both, but that	551	the child process (or both child and parent, but that again makes little
345	again makes little sense).	552	sense). You I<must> call it in the child before using any of the libev
		553	functions, and it will only take effect at the next C<ev_loop> iteration.
346		554
347	You I<must> call this function in the child process after forking if and	555	On the other hand, you only need to call this function in the child
348	only if you want to use the event library in both processes. If you just	556	process if and only if you want to use the event library in the child. If
349	fork+exec, you don't have to call it.	557	you just fork+exec, you don't have to call it at all.
350		558
351	The function itself is quite fast and it's usually not a problem to call	559	The function itself is quite fast and it's usually not a problem to call
352	it just in case after a fork. To make this easy, the function will fit in	560	it just in case after a fork. To make this easy, the function will fit in
353	quite nicely into a call to C<pthread_atfork>:	561	quite nicely into a call to C<pthread_atfork>:
354		562
355	pthread_atfork (0, 0, ev_default_fork);	563	pthread_atfork (0, 0, ev_default_fork);
356		564
357	At the moment, C<EVBACKEND_SELECT> and C<EVBACKEND_POLL> are safe to use
358	without calling this function, so if you force one of those backends you
359	do not need to care.
360
361	=item ev_loop_fork (loop)	565	=item ev_loop_fork (loop)
362		566
363	Like C<ev_default_fork>, but acts on an event loop created by	567	Like C<ev_default_fork>, but acts on an event loop created by
364	C<ev_loop_new>. Yes, you have to call this on every allocated event loop	568	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
365	after fork, and how you do this is entirely your own problem.	569	after fork that you want to re-use in the child, and how you do this is
		570	entirely your own problem.
		571
		572	=item int ev_is_default_loop (loop)
		573
		574	Returns true when the given loop is, in fact, the default loop, and false
		575	otherwise.
		576
		577	=item unsigned int ev_loop_count (loop)
		578
		579	Returns the count of loop iterations for the loop, which is identical to
		580	the number of times libev did poll for new events. It starts at C<0> and
		581	happily wraps around with enough iterations.
		582
		583	This value can sometimes be useful as a generation counter of sorts (it
		584	"ticks" the number of loop iterations), as it roughly corresponds with
		585	C<ev_prepare> and C<ev_check> calls.
366		586
367	=item unsigned int ev_backend (loop)	587	=item unsigned int ev_backend (loop)
368		588
369	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	589	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
370	use.	590	use.
…		…
373		593
374	Returns the current "event loop time", which is the time the event loop	594	Returns the current "event loop time", which is the time the event loop
375	received events and started processing them. This timestamp does not	595	received events and started processing them. This timestamp does not
376	change as long as callbacks are being processed, and this is also the base	596	change as long as callbacks are being processed, and this is also the base
377	time used for relative timers. You can treat it as the timestamp of the	597	time used for relative timers. You can treat it as the timestamp of the
378	event occuring (or more correctly, libev finding out about it).	598	event occurring (or more correctly, libev finding out about it).
		599
		600	=item ev_now_update (loop)
		601
		602	Establishes the current time by querying the kernel, updating the time
		603	returned by C<ev_now ()> in the progress. This is a costly operation and
		604	is usually done automatically within C<ev_loop ()>.
		605
		606	This function is rarely useful, but when some event callback runs for a
		607	very long time without entering the event loop, updating libev's idea of
		608	the current time is a good idea.
		609
		610	See also "The special problem of time updates" in the C<ev_timer> section.
379		611
380	=item ev_loop (loop, int flags)	612	=item ev_loop (loop, int flags)
381		613
382	Finally, this is it, the event handler. This function usually is called	614	Finally, this is it, the event handler. This function usually is called
383	after you initialised all your watchers and you want to start handling	615	after you initialised all your watchers and you want to start handling
…		…
386	If the flags argument is specified as C<0>, it will not return until	618	If the flags argument is specified as C<0>, it will not return until
387	either no event watchers are active anymore or C<ev_unloop> was called.	619	either no event watchers are active anymore or C<ev_unloop> was called.
388		620
389	Please note that an explicit C<ev_unloop> is usually better than	621	Please note that an explicit C<ev_unloop> is usually better than
390	relying on all watchers to be stopped when deciding when a program has	622	relying on all watchers to be stopped when deciding when a program has
391	finished (especially in interactive programs), but having a program that	623	finished (especially in interactive programs), but having a program
392	automatically loops as long as it has to and no longer by virtue of	624	that automatically loops as long as it has to and no longer by virtue
393	relying on its watchers stopping correctly is a thing of beauty.	625	of relying on its watchers stopping correctly, that is truly a thing of
		626	beauty.
394		627
395	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle	628	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle
396	those events and any outstanding ones, but will not block your process in	629	those events and any already outstanding ones, but will not block your
397	case there are no events and will return after one iteration of the loop.	630	process in case there are no events and will return after one iteration of
		631	the loop.
398		632
399	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if	633	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if
400	neccessary) and will handle those and any outstanding ones. It will block	634	necessary) and will handle those and any already outstanding ones. It
401	your process until at least one new event arrives, and will return after	635	will block your process until at least one new event arrives (which could
402	one iteration of the loop. This is useful if you are waiting for some	636	be an event internal to libev itself, so there is no guarentee that a
403	external event in conjunction with something not expressible using other	637	user-registered callback will be called), and will return after one
		638	iteration of the loop.
		639
		640	This is useful if you are waiting for some external event in conjunction
		641	with something not expressible using other libev watchers (i.e. "roll your
404	libev watchers. However, a pair of C<ev_prepare>/C<ev_check> watchers is	642	own C<ev_loop>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is
405	usually a better approach for this kind of thing.	643	usually a better approach for this kind of thing.
406		644
407	Here are the gory details of what C<ev_loop> does:	645	Here are the gory details of what C<ev_loop> does:
408		646
409	* If there are no active watchers (reference count is zero), return.	647	- Before the first iteration, call any pending watchers.
410	- Queue prepare watchers and then call all outstanding watchers.	648	* If EVFLAG_FORKCHECK was used, check for a fork.
		649	- If a fork was detected (by any means), queue and call all fork watchers.
		650	- Queue and call all prepare watchers.
411	- If we have been forked, recreate the kernel state.	651	- If we have been forked, detach and recreate the kernel state
		652	as to not disturb the other process.
412	- Update the kernel state with all outstanding changes.	653	- Update the kernel state with all outstanding changes.
413	- Update the "event loop time".	654	- Update the "event loop time" (ev_now ()).
414	- Calculate for how long to block.	655	- Calculate for how long to sleep or block, if at all
		656	(active idle watchers, EVLOOP_NONBLOCK or not having
		657	any active watchers at all will result in not sleeping).
		658	- Sleep if the I/O and timer collect interval say so.
415	- Block the process, waiting for any events.	659	- Block the process, waiting for any events.
416	- Queue all outstanding I/O (fd) events.	660	- Queue all outstanding I/O (fd) events.
417	- Update the "event loop time" and do time jump handling.	661	- Update the "event loop time" (ev_now ()), and do time jump adjustments.
418	- Queue all outstanding timers.	662	- Queue all expired timers.
419	- Queue all outstanding periodics.	663	- Queue all expired periodics.
420	- If no events are pending now, queue all idle watchers.	664	- Unless any events are pending now, queue all idle watchers.
421	- Queue all check watchers.	665	- Queue all check watchers.
422	- Call all queued watchers in reverse order (i.e. check watchers first).	666	- Call all queued watchers in reverse order (i.e. check watchers first).
423	Signals and child watchers are implemented as I/O watchers, and will	667	Signals and child watchers are implemented as I/O watchers, and will
424	be handled here by queueing them when their watcher gets executed.	668	be handled here by queueing them when their watcher gets executed.
425	- If ev_unloop has been called or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	669	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK
426	were used, return, otherwise continue with step *.	670	were used, or there are no active watchers, return, otherwise
		671	continue with step *.
427		672
428	Example: queue some jobs and then loop until no events are outsanding	673	Example: Queue some jobs and then loop until no events are outstanding
429	anymore.	674	anymore.
430		675
431	... queue jobs here, make sure they register event watchers as long	676	... queue jobs here, make sure they register event watchers as long
432	... as they still have work to do (even an idle watcher will do..)	677	... as they still have work to do (even an idle watcher will do..)
433	ev_loop (my_loop, 0);	678	ev_loop (my_loop, 0);
434	... jobs done. yeah!	679	... jobs done or somebody called unloop. yeah!
435		680
436	=item ev_unloop (loop, how)	681	=item ev_unloop (loop, how)
437		682
438	Can be used to make a call to C<ev_loop> return early (but only after it	683	Can be used to make a call to C<ev_loop> return early (but only after it
439	has processed all outstanding events). The C<how> argument must be either	684	has processed all outstanding events). The C<how> argument must be either
440	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	685	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or
441	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	686	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.
442		687
		688	This "unloop state" will be cleared when entering C<ev_loop> again.
		689
443	=item ev_ref (loop)	690	=item ev_ref (loop)
444		691
445	=item ev_unref (loop)	692	=item ev_unref (loop)
446		693
447	Ref/unref can be used to add or remove a reference count on the event	694	Ref/unref can be used to add or remove a reference count on the event
448	loop: Every watcher keeps one reference, and as long as the reference	695	loop: Every watcher keeps one reference, and as long as the reference
449	count is nonzero, C<ev_loop> will not return on its own. If you have	696	count is nonzero, C<ev_loop> will not return on its own.
		697
450	a watcher you never unregister that should not keep C<ev_loop> from	698	If you have a watcher you never unregister that should not keep C<ev_loop>
451	returning, ev_unref() after starting, and ev_ref() before stopping it. For	699	from returning, call ev_unref() after starting, and ev_ref() before
		700	stopping it.
		701
452	example, libev itself uses this for its internal signal pipe: It is not	702	As an example, libev itself uses this for its internal signal pipe: It is
453	visible to the libev user and should not keep C<ev_loop> from exiting if	703	not visible to the libev user and should not keep C<ev_loop> from exiting
454	no event watchers registered by it are active. It is also an excellent	704	if no event watchers registered by it are active. It is also an excellent
455	way to do this for generic recurring timers or from within third-party	705	way to do this for generic recurring timers or from within third-party
456	libraries. Just remember to I<unref after start> and I<ref before stop>.	706	libraries. Just remember to I<unref after start> and I<ref before stop>
		707	(but only if the watcher wasn't active before, or was active before,
		708	respectively).
457		709
458	Example: create a signal watcher, but keep it from keeping C<ev_loop>	710	Example: Create a signal watcher, but keep it from keeping C<ev_loop>
459	running when nothing else is active.	711	running when nothing else is active.
460		712
461	struct dv_signal exitsig;	713	struct ev_signal exitsig;
462	ev_signal_init (&exitsig, sig_cb, SIGINT);	714	ev_signal_init (&exitsig, sig_cb, SIGINT);
463	ev_signal_start (myloop, &exitsig);	715	ev_signal_start (loop, &exitsig);
464	evf_unref (myloop);	716	evf_unref (loop);
465		717
466	Example: for some weird reason, unregister the above signal handler again.	718	Example: For some weird reason, unregister the above signal handler again.
467		719
468	ev_ref (myloop);	720	ev_ref (loop);
469	ev_signal_stop (myloop, &exitsig);	721	ev_signal_stop (loop, &exitsig);
		722
		723	=item ev_set_io_collect_interval (loop, ev_tstamp interval)
		724
		725	=item ev_set_timeout_collect_interval (loop, ev_tstamp interval)
		726
		727	These advanced functions influence the time that libev will spend waiting
		728	for events. Both time intervals are by default C<0>, meaning that libev
		729	will try to invoke timer/periodic callbacks and I/O callbacks with minimum
		730	latency.
		731
		732	Setting these to a higher value (the C<interval> I<must> be >= C<0>)
		733	allows libev to delay invocation of I/O and timer/periodic callbacks
		734	to increase efficiency of loop iterations (or to increase power-saving
		735	opportunities).
		736
		737	The idea is that sometimes your program runs just fast enough to handle
		738	one (or very few) event(s) per loop iteration. While this makes the
		739	program responsive, it also wastes a lot of CPU time to poll for new
		740	events, especially with backends like C<select ()> which have a high
		741	overhead for the actual polling but can deliver many events at once.
		742
		743	By setting a higher I<io collect interval> you allow libev to spend more
		744	time collecting I/O events, so you can handle more events per iteration,
		745	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
		746	C<ev_timer>) will be not affected. Setting this to a non-null value will
		747	introduce an additional C<ev_sleep ()> call into most loop iterations.
		748
		749	Likewise, by setting a higher I<timeout collect interval> you allow libev
		750	to spend more time collecting timeouts, at the expense of increased
		751	latency/jitter/inexactness (the watcher callback will be called
		752	later). C<ev_io> watchers will not be affected. Setting this to a non-null
		753	value will not introduce any overhead in libev.
		754
		755	Many (busy) programs can usually benefit by setting the I/O collect
		756	interval to a value near C<0.1> or so, which is often enough for
		757	interactive servers (of course not for games), likewise for timeouts. It
		758	usually doesn't make much sense to set it to a lower value than C<0.01>,
		759	as this approaches the timing granularity of most systems.
		760
		761	Setting the I<timeout collect interval> can improve the opportunity for
		762	saving power, as the program will "bundle" timer callback invocations that
		763	are "near" in time together, by delaying some, thus reducing the number of
		764	times the process sleeps and wakes up again. Another useful technique to
		765	reduce iterations/wake-ups is to use C<ev_periodic> watchers and make sure
		766	they fire on, say, one-second boundaries only.
		767
		768	=item ev_loop_verify (loop)
		769
		770	This function only does something when C<EV_VERIFY> support has been
		771	compiled in. which is the default for non-minimal builds. It tries to go
		772	through all internal structures and checks them for validity. If anything
		773	is found to be inconsistent, it will print an error message to standard
		774	error and call C<abort ()>.
		775
		776	This can be used to catch bugs inside libev itself: under normal
		777	circumstances, this function will never abort as of course libev keeps its
		778	data structures consistent.
470		779
471	=back	780	=back
		781
472		782
473	=head1 ANATOMY OF A WATCHER	783	=head1 ANATOMY OF A WATCHER
474		784
475	A watcher is a structure that you create and register to record your	785	A watcher is a structure that you create and register to record your
476	interest in some event. For instance, if you want to wait for STDIN to	786	interest in some event. For instance, if you want to wait for STDIN to
477	become readable, you would create an C<ev_io> watcher for that:	787	become readable, you would create an C<ev_io> watcher for that:
478		788
479	static void my_cb (struct ev_loop *loop, struct ev_io *w, int revents)	789	static void my_cb (struct ev_loop *loop, struct ev_io *w, int revents)
480	{	790	{
481	ev_io_stop (w);	791	ev_io_stop (w);
482	ev_unloop (loop, EVUNLOOP_ALL);	792	ev_unloop (loop, EVUNLOOP_ALL);
483	}	793	}
484		794
485	struct ev_loop *loop = ev_default_loop (0);	795	struct ev_loop *loop = ev_default_loop (0);
486	struct ev_io stdin_watcher;	796	struct ev_io stdin_watcher;
487	ev_init (&stdin_watcher, my_cb);	797	ev_init (&stdin_watcher, my_cb);
488	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);	798	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
489	ev_io_start (loop, &stdin_watcher);	799	ev_io_start (loop, &stdin_watcher);
490	ev_loop (loop, 0);	800	ev_loop (loop, 0);
491		801
492	As you can see, you are responsible for allocating the memory for your	802	As you can see, you are responsible for allocating the memory for your
493	watcher structures (and it is usually a bad idea to do this on the stack,	803	watcher structures (and it is usually a bad idea to do this on the stack,
494	although this can sometimes be quite valid).	804	although this can sometimes be quite valid).
495		805
496	Each watcher structure must be initialised by a call to C<ev_init	806	Each watcher structure must be initialised by a call to C<ev_init
497	(watcher *, callback)>, which expects a callback to be provided. This	807	(watcher *, callback)>, which expects a callback to be provided. This
498	callback gets invoked each time the event occurs (or, in the case of io	808	callback gets invoked each time the event occurs (or, in the case of I/O
499	watchers, each time the event loop detects that the file descriptor given	809	watchers, each time the event loop detects that the file descriptor given
500	is readable and/or writable).	810	is readable and/or writable).
501		811
502	Each watcher type has its own C<< ev_<type>_set (watcher *, ...) >> macro	812	Each watcher type has its own C<< ev_<type>_set (watcher *, ...) >> macro
503	with arguments specific to this watcher type. There is also a macro	813	with arguments specific to this watcher type. There is also a macro
…		…
543	The signal specified in the C<ev_signal> watcher has been received by a thread.	853	The signal specified in the C<ev_signal> watcher has been received by a thread.
544		854
545	=item C<EV_CHILD>	855	=item C<EV_CHILD>
546		856
547	The pid specified in the C<ev_child> watcher has received a status change.	857	The pid specified in the C<ev_child> watcher has received a status change.
		858
		859	=item C<EV_STAT>
		860
		861	The path specified in the C<ev_stat> watcher changed its attributes somehow.
548		862
549	=item C<EV_IDLE>	863	=item C<EV_IDLE>
550		864
551	The C<ev_idle> watcher has determined that you have nothing better to do.	865	The C<ev_idle> watcher has determined that you have nothing better to do.
552		866
…		…
560	received events. Callbacks of both watcher types can start and stop as	874	received events. Callbacks of both watcher types can start and stop as
561	many watchers as they want, and all of them will be taken into account	875	many watchers as they want, and all of them will be taken into account
562	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	876	(for example, a C<ev_prepare> watcher might start an idle watcher to keep
563	C<ev_loop> from blocking).	877	C<ev_loop> from blocking).
564		878
		879	=item C<EV_EMBED>
		880
		881	The embedded event loop specified in the C<ev_embed> watcher needs attention.
		882
		883	=item C<EV_FORK>
		884
		885	The event loop has been resumed in the child process after fork (see
		886	C<ev_fork>).
		887
		888	=item C<EV_ASYNC>
		889
		890	The given async watcher has been asynchronously notified (see C<ev_async>).
		891
565	=item C<EV_ERROR>	892	=item C<EV_ERROR>
566		893
567	An unspecified error has occured, the watcher has been stopped. This might	894	An unspecified error has occurred, the watcher has been stopped. This might
568	happen because the watcher could not be properly started because libev	895	happen because the watcher could not be properly started because libev
569	ran out of memory, a file descriptor was found to be closed or any other	896	ran out of memory, a file descriptor was found to be closed or any other
570	problem. You best act on it by reporting the problem and somehow coping	897	problem. You best act on it by reporting the problem and somehow coping
571	with the watcher being stopped.	898	with the watcher being stopped.
572		899
573	Libev will usually signal a few "dummy" events together with an error,	900	Libev will usually signal a few "dummy" events together with an error, for
574	for example it might indicate that a fd is readable or writable, and if	901	example it might indicate that a fd is readable or writable, and if your
575	your callbacks is well-written it can just attempt the operation and cope	902	callbacks is well-written it can just attempt the operation and cope with
576	with the error from read() or write(). This will not work in multithreaded	903	the error from read() or write(). This will not work in multi-threaded
577	programs, though, so beware.	904	programs, though, as the fd could already be closed and reused for another
		905	thing, so beware.
578		906
579	=back	907	=back
580		908
581	=head2 SUMMARY OF GENERIC WATCHER FUNCTIONS	909	=head2 GENERIC WATCHER FUNCTIONS
582		910
583	In the following description, C<TYPE> stands for the watcher type,	911	In the following description, C<TYPE> stands for the watcher type,
584	e.g. C<timer> for C<ev_timer> watchers and C<io> for C<ev_io> watchers.	912	e.g. C<timer> for C<ev_timer> watchers and C<io> for C<ev_io> watchers.
585		913
586	=over 4	914	=over 4
…		…
595	which rolls both calls into one.	923	which rolls both calls into one.
596		924
597	You can reinitialise a watcher at any time as long as it has been stopped	925	You can reinitialise a watcher at any time as long as it has been stopped
598	(or never started) and there are no pending events outstanding.	926	(or never started) and there are no pending events outstanding.
599		927
600	The callbakc is always of type C<void (*)(ev_loop *loop, ev_TYPE *watcher,	928	The callback is always of type C<void (*)(ev_loop *loop, ev_TYPE *watcher,
601	int revents)>.	929	int revents)>.
		930
		931	Example: Initialise an C<ev_io> watcher in two steps.
		932
		933	ev_io w;
		934	ev_init (&w, my_cb);
		935	ev_io_set (&w, STDIN_FILENO, EV_READ);
602		936
603	=item C<ev_TYPE_set> (ev_TYPE *, [args])	937	=item C<ev_TYPE_set> (ev_TYPE *, [args])
604		938
605	This macro initialises the type-specific parts of a watcher. You need to	939	This macro initialises the type-specific parts of a watcher. You need to
606	call C<ev_init> at least once before you call this macro, but you can	940	call C<ev_init> at least once before you call this macro, but you can
…		…
609	difference to the C<ev_init> macro).	943	difference to the C<ev_init> macro).
610		944
611	Although some watcher types do not have type-specific arguments	945	Although some watcher types do not have type-specific arguments
612	(e.g. C<ev_prepare>) you still need to call its C<set> macro.	946	(e.g. C<ev_prepare>) you still need to call its C<set> macro.
613		947
		948	See C<ev_init>, above, for an example.
		949
614	=item C<ev_TYPE_init> (ev_TYPE *watcher, callback, [args])	950	=item C<ev_TYPE_init> (ev_TYPE *watcher, callback, [args])
615		951
616	This convinience macro rolls both C<ev_init> and C<ev_TYPE_set> macro	952	This convenience macro rolls both C<ev_init> and C<ev_TYPE_set> macro
617	calls into a single call. This is the most convinient method to initialise	953	calls into a single call. This is the most convenient method to initialise
618	a watcher. The same limitations apply, of course.	954	a watcher. The same limitations apply, of course.
		955
		956	Example: Initialise and set an C<ev_io> watcher in one step.
		957
		958	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);
619		959
620	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)	960	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)
621		961
622	Starts (activates) the given watcher. Only active watchers will receive	962	Starts (activates) the given watcher. Only active watchers will receive
623	events. If the watcher is already active nothing will happen.	963	events. If the watcher is already active nothing will happen.
		964
		965	Example: Start the C<ev_io> watcher that is being abused as example in this
		966	whole section.
		967
		968	ev_io_start (EV_DEFAULT_UC, &w);
624		969
625	=item C<ev_TYPE_stop> (loop *, ev_TYPE *watcher)	970	=item C<ev_TYPE_stop> (loop *, ev_TYPE *watcher)
626		971
627	Stops the given watcher again (if active) and clears the pending	972	Stops the given watcher again (if active) and clears the pending
628	status. It is possible that stopped watchers are pending (for example,	973	status. It is possible that stopped watchers are pending (for example,
…		…
640	=item bool ev_is_pending (ev_TYPE *watcher)	985	=item bool ev_is_pending (ev_TYPE *watcher)
641		986
642	Returns a true value iff the watcher is pending, (i.e. it has outstanding	987	Returns a true value iff the watcher is pending, (i.e. it has outstanding
643	events but its callback has not yet been invoked). As long as a watcher	988	events but its callback has not yet been invoked). As long as a watcher
644	is pending (but not active) you must not call an init function on it (but	989	is pending (but not active) you must not call an init function on it (but
645	C<ev_TYPE_set> is safe) and you must make sure the watcher is available to	990	C<ev_TYPE_set> is safe), you must not change its priority, and you must
646	libev (e.g. you cnanot C<free ()> it).	991	make sure the watcher is available to libev (e.g. you cannot C<free ()>
		992	it).
647		993
648	=item callback = ev_cb (ev_TYPE *watcher)	994	=item callback ev_cb (ev_TYPE *watcher)
649		995
650	Returns the callback currently set on the watcher.	996	Returns the callback currently set on the watcher.
651		997
652	=item ev_cb_set (ev_TYPE *watcher, callback)	998	=item ev_cb_set (ev_TYPE *watcher, callback)
653		999
654	Change the callback. You can change the callback at virtually any time	1000	Change the callback. You can change the callback at virtually any time
655	(modulo threads).	1001	(modulo threads).
656		1002
		1003	=item ev_set_priority (ev_TYPE *watcher, priority)
		1004
		1005	=item int ev_priority (ev_TYPE *watcher)
		1006
		1007	Set and query the priority of the watcher. The priority is a small
		1008	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
		1009	(default: C<-2>). Pending watchers with higher priority will be invoked
		1010	before watchers with lower priority, but priority will not keep watchers
		1011	from being executed (except for C<ev_idle> watchers).
		1012
		1013	This means that priorities are I<only> used for ordering callback
		1014	invocation after new events have been received. This is useful, for
		1015	example, to reduce latency after idling, or more often, to bind two
		1016	watchers on the same event and make sure one is called first.
		1017
		1018	If you need to suppress invocation when higher priority events are pending
		1019	you need to look at C<ev_idle> watchers, which provide this functionality.
		1020
		1021	You I<must not> change the priority of a watcher as long as it is active or
		1022	pending.
		1023
		1024	The default priority used by watchers when no priority has been set is
		1025	always C<0>, which is supposed to not be too high and not be too low :).
		1026
		1027	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is
		1028	fine, as long as you do not mind that the priority value you query might
		1029	or might not have been adjusted to be within valid range.
		1030
		1031	=item ev_invoke (loop, ev_TYPE *watcher, int revents)
		1032
		1033	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
		1034	C<loop> nor C<revents> need to be valid as long as the watcher callback
		1035	can deal with that fact, as both are simply passed through to the
		1036	callback.
		1037
		1038	=item int ev_clear_pending (loop, ev_TYPE *watcher)
		1039
		1040	If the watcher is pending, this function clears its pending status and
		1041	returns its C<revents> bitset (as if its callback was invoked). If the
		1042	watcher isn't pending it does nothing and returns C<0>.
		1043
		1044	Sometimes it can be useful to "poll" a watcher instead of waiting for its
		1045	callback to be invoked, which can be accomplished with this function.
		1046
657	=back	1047	=back
658		1048
659		1049
660	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	1050	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
661		1051
662	Each watcher has, by default, a member C<void *data> that you can change	1052	Each watcher has, by default, a member C<void *data> that you can change
663	and read at any time, libev will completely ignore it. This can be used	1053	and read at any time: libev will completely ignore it. This can be used
664	to associate arbitrary data with your watcher. If you need more data and	1054	to associate arbitrary data with your watcher. If you need more data and
665	don't want to allocate memory and store a pointer to it in that data	1055	don't want to allocate memory and store a pointer to it in that data
666	member, you can also "subclass" the watcher type and provide your own	1056	member, you can also "subclass" the watcher type and provide your own
667	data:	1057	data:
668		1058
669	struct my_io	1059	struct my_io
670	{	1060	{
671	struct ev_io io;	1061	struct ev_io io;
672	int otherfd;	1062	int otherfd;
673	void *somedata;	1063	void *somedata;
674	struct whatever *mostinteresting;	1064	struct whatever *mostinteresting;
675	}	1065	};
		1066
		1067	...
		1068	struct my_io w;
		1069	ev_io_init (&w.io, my_cb, fd, EV_READ);
676		1070
677	And since your callback will be called with a pointer to the watcher, you	1071	And since your callback will be called with a pointer to the watcher, you
678	can cast it back to your own type:	1072	can cast it back to your own type:
679		1073
680	static void my_cb (struct ev_loop *loop, struct ev_io *w_, int revents)	1074	static void my_cb (struct ev_loop *loop, struct ev_io *w_, int revents)
681	{	1075	{
682	struct my_io *w = (struct my_io *)w_;	1076	struct my_io *w = (struct my_io *)w_;
683	...	1077	...
684	}	1078	}
685		1079
686	More interesting and less C-conformant ways of catsing your callback type	1080	More interesting and less C-conformant ways of casting your callback type
687	have been omitted....	1081	instead have been omitted.
		1082
		1083	Another common scenario is to use some data structure with multiple
		1084	embedded watchers:
		1085
		1086	struct my_biggy
		1087	{
		1088	int some_data;
		1089	ev_timer t1;
		1090	ev_timer t2;
		1091	}
		1092
		1093	In this case getting the pointer to C<my_biggy> is a bit more
		1094	complicated: Either you store the address of your C<my_biggy> struct
		1095	in the C<data> member of the watcher (for woozies), or you need to use
		1096	some pointer arithmetic using C<offsetof> inside your watchers (for real
		1097	programmers):
		1098
		1099	#include <stddef.h>
		1100
		1101	static void
		1102	t1_cb (EV_P_ struct ev_timer *w, int revents)
		1103	{
		1104	struct my_biggy big = (struct my_biggy *
		1105	(((char *)w) - offsetof (struct my_biggy, t1));
		1106	}
		1107
		1108	static void
		1109	t2_cb (EV_P_ struct ev_timer *w, int revents)
		1110	{
		1111	struct my_biggy big = (struct my_biggy *
		1112	(((char *)w) - offsetof (struct my_biggy, t2));
		1113	}
688		1114
689		1115
690	=head1 WATCHER TYPES	1116	=head1 WATCHER TYPES
691		1117
692	This section describes each watcher in detail, but will not repeat	1118	This section describes each watcher in detail, but will not repeat
693	information given in the last section.	1119	information given in the last section. Any initialisation/set macros,
		1120	functions and members specific to the watcher type are explained.
694		1121
		1122	Members are additionally marked with either I<[read-only]>, meaning that,
		1123	while the watcher is active, you can look at the member and expect some
		1124	sensible content, but you must not modify it (you can modify it while the
		1125	watcher is stopped to your hearts content), or I<[read-write]>, which
		1126	means you can expect it to have some sensible content while the watcher
		1127	is active, but you can also modify it. Modifying it may not do something
		1128	sensible or take immediate effect (or do anything at all), but libev will
		1129	not crash or malfunction in any way.
695		1130
		1131
696	=head2 C<ev_io> - is this file descriptor readable or writable	1132	=head2 C<ev_io> - is this file descriptor readable or writable?
697		1133
698	I/O watchers check whether a file descriptor is readable or writable	1134	I/O watchers check whether a file descriptor is readable or writable
699	in each iteration of the event loop (This behaviour is called	1135	in each iteration of the event loop, or, more precisely, when reading
700	level-triggering because you keep receiving events as long as the	1136	would not block the process and writing would at least be able to write
701	condition persists. Remember you can stop the watcher if you don't want to	1137	some data. This behaviour is called level-triggering because you keep
702	act on the event and neither want to receive future events).	1138	receiving events as long as the condition persists. Remember you can stop
		1139	the watcher if you don't want to act on the event and neither want to
		1140	receive future events.
703		1141
704	In general you can register as many read and/or write event watchers per	1142	In general you can register as many read and/or write event watchers per
705	fd as you want (as long as you don't confuse yourself). Setting all file	1143	fd as you want (as long as you don't confuse yourself). Setting all file
706	descriptors to non-blocking mode is also usually a good idea (but not	1144	descriptors to non-blocking mode is also usually a good idea (but not
707	required if you know what you are doing).	1145	required if you know what you are doing).
708		1146
709	You have to be careful with dup'ed file descriptors, though. Some backends	1147	If you cannot use non-blocking mode, then force the use of a
710	(the linux epoll backend is a notable example) cannot handle dup'ed file	1148	known-to-be-good backend (at the time of this writing, this includes only
711	descriptors correctly if you register interest in two or more fds pointing	1149	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>).
712	to the same underlying file/socket etc. description (that is, they share
713	the same underlying "file open").
714		1150
715	If you must do this, then force the use of a known-to-be-good backend	1151	Another thing you have to watch out for is that it is quite easy to
716	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and	1152	receive "spurious" readiness notifications, that is your callback might
		1153	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
		1154	because there is no data. Not only are some backends known to create a
		1155	lot of those (for example Solaris ports), it is very easy to get into
		1156	this situation even with a relatively standard program structure. Thus
		1157	it is best to always use non-blocking I/O: An extra C<read>(2) returning
		1158	C<EAGAIN> is far preferable to a program hanging until some data arrives.
		1159
		1160	If you cannot run the fd in non-blocking mode (for example you should
		1161	not play around with an Xlib connection), then you have to separately
		1162	re-test whether a file descriptor is really ready with a known-to-be good
		1163	interface such as poll (fortunately in our Xlib example, Xlib already
		1164	does this on its own, so its quite safe to use). Some people additionally
		1165	use C<SIGALRM> and an interval timer, just to be sure you won't block
		1166	indefinitely.
		1167
		1168	But really, best use non-blocking mode.
		1169
		1170	=head3 The special problem of disappearing file descriptors
		1171
		1172	Some backends (e.g. kqueue, epoll) need to be told about closing a file
		1173	descriptor (either due to calling C<close> explicitly or any other means,
		1174	such as C<dup2>). The reason is that you register interest in some file
		1175	descriptor, but when it goes away, the operating system will silently drop
		1176	this interest. If another file descriptor with the same number then is
		1177	registered with libev, there is no efficient way to see that this is, in
		1178	fact, a different file descriptor.
		1179
		1180	To avoid having to explicitly tell libev about such cases, libev follows
		1181	the following policy: Each time C<ev_io_set> is being called, libev
		1182	will assume that this is potentially a new file descriptor, otherwise
		1183	it is assumed that the file descriptor stays the same. That means that
		1184	you I<have> to call C<ev_io_set> (or C<ev_io_init>) when you change the
		1185	descriptor even if the file descriptor number itself did not change.
		1186
		1187	This is how one would do it normally anyway, the important point is that
		1188	the libev application should not optimise around libev but should leave
		1189	optimisations to libev.
		1190
		1191	=head3 The special problem of dup'ed file descriptors
		1192
		1193	Some backends (e.g. epoll), cannot register events for file descriptors,
		1194	but only events for the underlying file descriptions. That means when you
		1195	have C<dup ()>'ed file descriptors or weirder constellations, and register
		1196	events for them, only one file descriptor might actually receive events.
		1197
		1198	There is no workaround possible except not registering events
		1199	for potentially C<dup ()>'ed file descriptors, or to resort to
		1200	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
		1201
		1202	=head3 The special problem of fork
		1203
		1204	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit
		1205	useless behaviour. Libev fully supports fork, but needs to be told about
		1206	it in the child.
		1207
		1208	To support fork in your programs, you either have to call
		1209	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,
		1210	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or
717	C<EVBACKEND_POLL>).	1211	C<EVBACKEND_POLL>.
		1212
		1213	=head3 The special problem of SIGPIPE
		1214
		1215	While not really specific to libev, it is easy to forget about C<SIGPIPE>:
		1216	when writing to a pipe whose other end has been closed, your program gets
		1217	sent a SIGPIPE, which, by default, aborts your program. For most programs
		1218	this is sensible behaviour, for daemons, this is usually undesirable.
		1219
		1220	So when you encounter spurious, unexplained daemon exits, make sure you
		1221	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
		1222	somewhere, as that would have given you a big clue).
		1223
		1224
		1225	=head3 Watcher-Specific Functions
718		1226
719	=over 4	1227	=over 4
720		1228
721	=item ev_io_init (ev_io *, callback, int fd, int events)	1229	=item ev_io_init (ev_io *, callback, int fd, int events)
722		1230
723	=item ev_io_set (ev_io *, int fd, int events)	1231	=item ev_io_set (ev_io *, int fd, int events)
724		1232
725	Configures an C<ev_io> watcher. The fd is the file descriptor to rceeive	1233	Configures an C<ev_io> watcher. The C<fd> is the file descriptor to
726	events for and events is either C<EV_READ>, C<EV_WRITE> or C<EV_READ |	1234	receive events for and C<events> is either C<EV_READ>, C<EV_WRITE> or
727	EV_WRITE> to receive the given events.	1235	C<EV_READ | EV_WRITE>, to express the desire to receive the given events.
728		1236
729	Please note that most of the more scalable backend mechanisms (for example	1237	=item int fd [read-only]
730	epoll and solaris ports) can result in spurious readyness notifications	1238
731	for file descriptors, so you practically need to use non-blocking I/O (and	1239	The file descriptor being watched.
732	treat callback invocation as hint only), or retest separately with a safe	1240
733	interface before doing I/O (XLib can do this), or force the use of either	1241	=item int events [read-only]
734	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>, which don't suffer from this	1242
735	problem. Also note that it is quite easy to have your callback invoked	1243	The events being watched.
736	when the readyness condition is no longer valid even when employing
737	typical ways of handling events, so its a good idea to use non-blocking
738	I/O unconditionally.
739		1244
740	=back	1245	=back
741		1246
		1247	=head3 Examples
		1248
742	Example: call C<stdin_readable_cb> when STDIN_FILENO has become, well	1249	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well
743	readable, but only once. Since it is likely line-buffered, you could	1250	readable, but only once. Since it is likely line-buffered, you could
744	attempt to read a whole line in the callback:	1251	attempt to read a whole line in the callback.
745		1252
746	static void	1253	static void
747	stdin_readable_cb (struct ev_loop *loop, struct ev_io *w, int revents)	1254	stdin_readable_cb (struct ev_loop *loop, struct ev_io *w, int revents)
748	{	1255	{
749	ev_io_stop (loop, w);	1256	ev_io_stop (loop, w);
750	.. read from stdin here (or from w->fd) and haqndle any I/O errors	1257	.. read from stdin here (or from w->fd) and handle any I/O errors
751	}	1258	}
752		1259
753	...	1260	...
754	struct ev_loop *loop = ev_default_init (0);	1261	struct ev_loop *loop = ev_default_init (0);
755	struct ev_io stdin_readable;	1262	struct ev_io stdin_readable;
756	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);	1263	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
757	ev_io_start (loop, &stdin_readable);	1264	ev_io_start (loop, &stdin_readable);
758	ev_loop (loop, 0);	1265	ev_loop (loop, 0);
759		1266
760		1267
761	=head2 C<ev_timer> - relative and optionally recurring timeouts	1268	=head2 C<ev_timer> - relative and optionally repeating timeouts
762		1269
763	Timer watchers are simple relative timers that generate an event after a	1270	Timer watchers are simple relative timers that generate an event after a
764	given time, and optionally repeating in regular intervals after that.	1271	given time, and optionally repeating in regular intervals after that.
765		1272
766	The timers are based on real time, that is, if you register an event that	1273	The timers are based on real time, that is, if you register an event that
767	times out after an hour and you reset your system clock to last years	1274	times out after an hour and you reset your system clock to January last
768	time, it will still time out after (roughly) and hour. "Roughly" because	1275	year, it will still time out after (roughly) one hour. "Roughly" because
769	detecting time jumps is hard, and some inaccuracies are unavoidable (the	1276	detecting time jumps is hard, and some inaccuracies are unavoidable (the
770	monotonic clock option helps a lot here).	1277	monotonic clock option helps a lot here).
		1278
		1279	The callback is guaranteed to be invoked only I<after> its timeout has
		1280	passed, but if multiple timers become ready during the same loop iteration
		1281	then order of execution is undefined.
		1282
		1283	=head3 The special problem of time updates
		1284
		1285	Establishing the current time is a costly operation (it usually takes at
		1286	least two system calls): EV therefore updates its idea of the current
		1287	time only before and after C<ev_loop> collects new events, which causes a
		1288	growing difference between C<ev_now ()> and C<ev_time ()> when handling
		1289	lots of events in one iteration.
771		1290
772	The relative timeouts are calculated relative to the C<ev_now ()>	1291	The relative timeouts are calculated relative to the C<ev_now ()>
773	time. This is usually the right thing as this timestamp refers to the time	1292	time. This is usually the right thing as this timestamp refers to the time
774	of the event triggering whatever timeout you are modifying/starting. If	1293	of the event triggering whatever timeout you are modifying/starting. If
775	you suspect event processing to be delayed and you I<need> to base the timeout	1294	you suspect event processing to be delayed and you I<need> to base the
776	on the current time, use something like this to adjust for this:	1295	timeout on the current time, use something like this to adjust for this:
777		1296
778	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);	1297	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);
779		1298
780	The callback is guarenteed to be invoked only when its timeout has passed,	1299	If the event loop is suspended for a long time, you can also force an
781	but if multiple timers become ready during the same loop iteration then	1300	update of the time returned by C<ev_now ()> by calling C<ev_now_update
782	order of execution is undefined.	1301	()>.
		1302
		1303	=head3 Watcher-Specific Functions and Data Members
783		1304
784	=over 4	1305	=over 4
785		1306
786	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	1307	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
787		1308
788	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)	1309	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)
789		1310
790	Configure the timer to trigger after C<after> seconds. If C<repeat> is	1311	Configure the timer to trigger after C<after> seconds. If C<repeat>
791	C<0.>, then it will automatically be stopped. If it is positive, then the	1312	is C<0.>, then it will automatically be stopped once the timeout is
792	timer will automatically be configured to trigger again C<repeat> seconds	1313	reached. If it is positive, then the timer will automatically be
793	later, again, and again, until stopped manually.	1314	configured to trigger again C<repeat> seconds later, again, and again,
		1315	until stopped manually.
794		1316
795	The timer itself will do a best-effort at avoiding drift, that is, if you	1317	The timer itself will do a best-effort at avoiding drift, that is, if
796	configure a timer to trigger every 10 seconds, then it will trigger at	1318	you configure a timer to trigger every 10 seconds, then it will normally
797	exactly 10 second intervals. If, however, your program cannot keep up with	1319	trigger at exactly 10 second intervals. If, however, your program cannot
798	the timer (because it takes longer than those 10 seconds to do stuff) the	1320	keep up with the timer (because it takes longer than those 10 seconds to
799	timer will not fire more than once per event loop iteration.	1321	do stuff) the timer will not fire more than once per event loop iteration.
800		1322
801	=item ev_timer_again (loop)	1323	=item ev_timer_again (loop, ev_timer *)
802		1324
803	This will act as if the timer timed out and restart it again if it is	1325	This will act as if the timer timed out and restart it again if it is
804	repeating. The exact semantics are:	1326	repeating. The exact semantics are:
805		1327
		1328	If the timer is pending, its pending status is cleared.
		1329
806	If the timer is started but nonrepeating, stop it.	1330	If the timer is started but non-repeating, stop it (as if it timed out).
807		1331
808	If the timer is repeating, either start it if necessary (with the repeat	1332	If the timer is repeating, either start it if necessary (with the
809	value), or reset the running timer to the repeat value.	1333	C<repeat> value), or reset the running timer to the C<repeat> value.
810		1334
811	This sounds a bit complicated, but here is a useful and typical	1335	This sounds a bit complicated, but here is a useful and typical
812	example: Imagine you have a tcp connection and you want a so-called idle	1336	example: Imagine you have a TCP connection and you want a so-called idle
813	timeout, that is, you want to be called when there have been, say, 60	1337	timeout, that is, you want to be called when there have been, say, 60
814	seconds of inactivity on the socket. The easiest way to do this is to	1338	seconds of inactivity on the socket. The easiest way to do this is to
815	configure an C<ev_timer> with after=repeat=60 and calling ev_timer_again each	1339	configure an C<ev_timer> with a C<repeat> value of C<60> and then call
816	time you successfully read or write some data. If you go into an idle	1340	C<ev_timer_again> each time you successfully read or write some data. If
817	state where you do not expect data to travel on the socket, you can stop	1341	you go into an idle state where you do not expect data to travel on the
818	the timer, and again will automatically restart it if need be.	1342	socket, you can C<ev_timer_stop> the timer, and C<ev_timer_again> will
		1343	automatically restart it if need be.
		1344
		1345	That means you can ignore the C<after> value and C<ev_timer_start>
		1346	altogether and only ever use the C<repeat> value and C<ev_timer_again>:
		1347
		1348	ev_timer_init (timer, callback, 0., 5.);
		1349	ev_timer_again (loop, timer);
		1350	...
		1351	timer->again = 17.;
		1352	ev_timer_again (loop, timer);
		1353	...
		1354	timer->again = 10.;
		1355	ev_timer_again (loop, timer);
		1356
		1357	This is more slightly efficient then stopping/starting the timer each time
		1358	you want to modify its timeout value.
		1359
		1360	Note, however, that it is often even more efficient to remember the
		1361	time of the last activity and let the timer time-out naturally. In the
		1362	callback, you then check whether the time-out is real, or, if there was
		1363	some activity, you reschedule the watcher to time-out in "last_activity +
		1364	timeout - ev_now ()" seconds.
		1365
		1366	=item ev_tstamp repeat [read-write]
		1367
		1368	The current C<repeat> value. Will be used each time the watcher times out
		1369	or C<ev_timer_again> is called, and determines the next timeout (if any),
		1370	which is also when any modifications are taken into account.
819		1371
820	=back	1372	=back
821		1373
		1374	=head3 Examples
		1375
822	Example: create a timer that fires after 60 seconds.	1376	Example: Create a timer that fires after 60 seconds.
823		1377
824	static void	1378	static void
825	one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)	1379	one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)
826	{	1380	{
827	.. one minute over, w is actually stopped right here	1381	.. one minute over, w is actually stopped right here
828	}	1382	}
829		1383
830	struct ev_timer mytimer;	1384	struct ev_timer mytimer;
831	ev_timer_init (&mytimer, one_minute_cb, 60., 0.);	1385	ev_timer_init (&mytimer, one_minute_cb, 60., 0.);
832	ev_timer_start (loop, &mytimer);	1386	ev_timer_start (loop, &mytimer);
833		1387
834	Example: create a timeout timer that times out after 10 seconds of	1388	Example: Create a timeout timer that times out after 10 seconds of
835	inactivity.	1389	inactivity.
836		1390
837	static void	1391	static void
838	timeout_cb (struct ev_loop *loop, struct ev_timer *w, int revents)	1392	timeout_cb (struct ev_loop *loop, struct ev_timer *w, int revents)
839	{	1393	{
840	.. ten seconds without any activity	1394	.. ten seconds without any activity
841	}	1395	}
842		1396
843	struct ev_timer mytimer;	1397	struct ev_timer mytimer;
844	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */	1398	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
845	ev_timer_again (&mytimer); /* start timer */	1399	ev_timer_again (&mytimer); /* start timer */
846	ev_loop (loop, 0);	1400	ev_loop (loop, 0);
847		1401
848	// and in some piece of code that gets executed on any "activity":	1402	// and in some piece of code that gets executed on any "activity":
849	// reset the timeout to start ticking again at 10 seconds	1403	// reset the timeout to start ticking again at 10 seconds
850	ev_timer_again (&mytimer);	1404	ev_timer_again (&mytimer);
851		1405
852		1406
853	=head2 C<ev_periodic> - to cron or not to cron	1407	=head2 C<ev_periodic> - to cron or not to cron?
854		1408
855	Periodic watchers are also timers of a kind, but they are very versatile	1409	Periodic watchers are also timers of a kind, but they are very versatile
856	(and unfortunately a bit complex).	1410	(and unfortunately a bit complex).
857		1411
858	Unlike C<ev_timer>'s, they are not based on real time (or relative time)	1412	Unlike C<ev_timer>'s, they are not based on real time (or relative time)
859	but on wallclock time (absolute time). You can tell a periodic watcher	1413	but on wall clock time (absolute time). You can tell a periodic watcher
860	to trigger "at" some specific point in time. For example, if you tell a	1414	to trigger after some specific point in time. For example, if you tell a
861	periodic watcher to trigger in 10 seconds (by specifiying e.g. C<ev_now ()	1415	periodic watcher to trigger in 10 seconds (by specifying e.g. C<ev_now ()
862	+ 10.>) and then reset your system clock to the last year, then it will	1416	+ 10.>, that is, an absolute time not a delay) and then reset your system
		1417	clock to January of the previous year, then it will take more than year
863	take a year to trigger the event (unlike an C<ev_timer>, which would trigger	1418	to trigger the event (unlike an C<ev_timer>, which would still trigger
864	roughly 10 seconds later and of course not if you reset your system time	1419	roughly 10 seconds later as it uses a relative timeout).
865	again).
866		1420
867	They can also be used to implement vastly more complex timers, such as	1421	C<ev_periodic>s can also be used to implement vastly more complex timers,
868	triggering an event on eahc midnight, local time.	1422	such as triggering an event on each "midnight, local time", or other
		1423	complicated rules.
869		1424
870	As with timers, the callback is guarenteed to be invoked only when the	1425	As with timers, the callback is guaranteed to be invoked only when the
871	time (C<at>) has been passed, but if multiple periodic timers become ready	1426	time (C<at>) has passed, but if multiple periodic timers become ready
872	during the same loop iteration then order of execution is undefined.	1427	during the same loop iteration, then order of execution is undefined.
		1428
		1429	=head3 Watcher-Specific Functions and Data Members
873		1430
874	=over 4	1431	=over 4
875		1432
876	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)	1433	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)
877		1434
878	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)	1435	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)
879		1436
880	Lots of arguments, lets sort it out... There are basically three modes of	1437	Lots of arguments, lets sort it out... There are basically three modes of
881	operation, and we will explain them from simplest to complex:	1438	operation, and we will explain them from simplest to most complex:
882		1439
883	=over 4	1440	=over 4
884		1441
885	=item * absolute timer (interval = reschedule_cb = 0)	1442	=item * absolute timer (at = time, interval = reschedule_cb = 0)
886		1443
887	In this configuration the watcher triggers an event at the wallclock time	1444	In this configuration the watcher triggers an event after the wall clock
888	C<at> and doesn't repeat. It will not adjust when a time jump occurs,	1445	time C<at> has passed. It will not repeat and will not adjust when a time
889	that is, if it is to be run at January 1st 2011 then it will run when the	1446	jump occurs, that is, if it is to be run at January 1st 2011 then it will
890	system time reaches or surpasses this time.	1447	only run when the system clock reaches or surpasses this time.
891		1448
892	=item * non-repeating interval timer (interval > 0, reschedule_cb = 0)	1449	=item * repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)
893		1450
894	In this mode the watcher will always be scheduled to time out at the next	1451	In this mode the watcher will always be scheduled to time out at the next
895	C<at + N * interval> time (for some integer N) and then repeat, regardless	1452	C<at + N * interval> time (for some integer N, which can also be negative)
896	of any time jumps.	1453	and then repeat, regardless of any time jumps.
897		1454
898	This can be used to create timers that do not drift with respect to system	1455	This can be used to create timers that do not drift with respect to the
899	time:	1456	system clock, for example, here is a C<ev_periodic> that triggers each
		1457	hour, on the hour:
900		1458
901	ev_periodic_set (&periodic, 0., 3600., 0);	1459	ev_periodic_set (&periodic, 0., 3600., 0);
902		1460
903	This doesn't mean there will always be 3600 seconds in between triggers,	1461	This doesn't mean there will always be 3600 seconds in between triggers,
904	but only that the the callback will be called when the system time shows a	1462	but only that the callback will be called when the system time shows a
905	full hour (UTC), or more correctly, when the system time is evenly divisible	1463	full hour (UTC), or more correctly, when the system time is evenly divisible
906	by 3600.	1464	by 3600.
907		1465
908	Another way to think about it (for the mathematically inclined) is that	1466	Another way to think about it (for the mathematically inclined) is that
909	C<ev_periodic> will try to run the callback in this mode at the next possible	1467	C<ev_periodic> will try to run the callback in this mode at the next possible
910	time where C<time = at (mod interval)>, regardless of any time jumps.	1468	time where C<time = at (mod interval)>, regardless of any time jumps.
911		1469
		1470	For numerical stability it is preferable that the C<at> value is near
		1471	C<ev_now ()> (the current time), but there is no range requirement for
		1472	this value, and in fact is often specified as zero.
		1473
		1474	Note also that there is an upper limit to how often a timer can fire (CPU
		1475	speed for example), so if C<interval> is very small then timing stability
		1476	will of course deteriorate. Libev itself tries to be exact to be about one
		1477	millisecond (if the OS supports it and the machine is fast enough).
		1478
912	=item * manual reschedule mode (reschedule_cb = callback)	1479	=item * manual reschedule mode (at and interval ignored, reschedule_cb = callback)
913		1480
914	In this mode the values for C<interval> and C<at> are both being	1481	In this mode the values for C<interval> and C<at> are both being
915	ignored. Instead, each time the periodic watcher gets scheduled, the	1482	ignored. Instead, each time the periodic watcher gets scheduled, the
916	reschedule callback will be called with the watcher as first, and the	1483	reschedule callback will be called with the watcher as first, and the
917	current time as second argument.	1484	current time as second argument.
918		1485
919	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,	1486	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,
920	ever, or make any event loop modifications>. If you need to stop it,	1487	ever, or make ANY event loop modifications whatsoever>.
921	return C<now + 1e30> (or so, fudge fudge) and stop it afterwards (e.g. by
922	starting a prepare watcher).
923		1488
		1489	If you need to stop it, return C<now + 1e30> (or so, fudge fudge) and stop
		1490	it afterwards (e.g. by starting an C<ev_prepare> watcher, which is the
		1491	only event loop modification you are allowed to do).
		1492
924	Its prototype is C<ev_tstamp (*reschedule_cb)(struct ev_periodic *w,	1493	The callback prototype is C<ev_tstamp (*reschedule_cb)(struct ev_periodic
925	ev_tstamp now)>, e.g.:	1494	*w, ev_tstamp now)>, e.g.:
926		1495
927	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)	1496	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)
928	{	1497	{
929	return now + 60.;	1498	return now + 60.;
930	}	1499	}
…		…
932	It must return the next time to trigger, based on the passed time value	1501	It must return the next time to trigger, based on the passed time value
933	(that is, the lowest time value larger than to the second argument). It	1502	(that is, the lowest time value larger than to the second argument). It
934	will usually be called just before the callback will be triggered, but	1503	will usually be called just before the callback will be triggered, but
935	might be called at other times, too.	1504	might be called at other times, too.
936		1505
937	NOTE: I<< This callback must always return a time that is later than the	1506	NOTE: I<< This callback must always return a time that is higher than or
938	passed C<now> value >>. Not even C<now> itself will do, it I<must> be larger.	1507	equal to the passed C<now> value >>.
939		1508
940	This can be used to create very complex timers, such as a timer that	1509	This can be used to create very complex timers, such as a timer that
941	triggers on each midnight, local time. To do this, you would calculate the	1510	triggers on "next midnight, local time". To do this, you would calculate the
942	next midnight after C<now> and return the timestamp value for this. How	1511	next midnight after C<now> and return the timestamp value for this. How
943	you do this is, again, up to you (but it is not trivial, which is the main	1512	you do this is, again, up to you (but it is not trivial, which is the main
944	reason I omitted it as an example).	1513	reason I omitted it as an example).
945		1514
946	=back	1515	=back
…		…
950	Simply stops and restarts the periodic watcher again. This is only useful	1519	Simply stops and restarts the periodic watcher again. This is only useful
951	when you changed some parameters or the reschedule callback would return	1520	when you changed some parameters or the reschedule callback would return
952	a different time than the last time it was called (e.g. in a crond like	1521	a different time than the last time it was called (e.g. in a crond like
953	program when the crontabs have changed).	1522	program when the crontabs have changed).
954		1523
		1524	=item ev_tstamp ev_periodic_at (ev_periodic *)
		1525
		1526	When active, returns the absolute time that the watcher is supposed to
		1527	trigger next.
		1528
		1529	=item ev_tstamp offset [read-write]
		1530
		1531	When repeating, this contains the offset value, otherwise this is the
		1532	absolute point in time (the C<at> value passed to C<ev_periodic_set>).
		1533
		1534	Can be modified any time, but changes only take effect when the periodic
		1535	timer fires or C<ev_periodic_again> is being called.
		1536
		1537	=item ev_tstamp interval [read-write]
		1538
		1539	The current interval value. Can be modified any time, but changes only
		1540	take effect when the periodic timer fires or C<ev_periodic_again> is being
		1541	called.
		1542
		1543	=item ev_tstamp (*reschedule_cb)(struct ev_periodic *w, ev_tstamp now) [read-write]
		1544
		1545	The current reschedule callback, or C<0>, if this functionality is
		1546	switched off. Can be changed any time, but changes only take effect when
		1547	the periodic timer fires or C<ev_periodic_again> is being called.
		1548
955	=back	1549	=back
956		1550
		1551	=head3 Examples
		1552
957	Example: call a callback every hour, or, more precisely, whenever the	1553	Example: Call a callback every hour, or, more precisely, whenever the
958	system clock is divisible by 3600. The callback invocation times have	1554	system time is divisible by 3600. The callback invocation times have
959	potentially a lot of jittering, but good long-term stability.	1555	potentially a lot of jitter, but good long-term stability.
960		1556
961	static void	1557	static void
962	clock_cb (struct ev_loop *loop, struct ev_io *w, int revents)	1558	clock_cb (struct ev_loop *loop, struct ev_io *w, int revents)
963	{	1559	{
964	... its now a full hour (UTC, or TAI or whatever your clock follows)	1560	... its now a full hour (UTC, or TAI or whatever your clock follows)
965	}	1561	}
966		1562
967	struct ev_periodic hourly_tick;	1563	struct ev_periodic hourly_tick;
968	ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);	1564	ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);
969	ev_periodic_start (loop, &hourly_tick);	1565	ev_periodic_start (loop, &hourly_tick);
970		1566
971	Example: the same as above, but use a reschedule callback to do it:	1567	Example: The same as above, but use a reschedule callback to do it:
972		1568
973	#include <math.h>	1569	#include <math.h>
974		1570
975	static ev_tstamp	1571	static ev_tstamp
976	my_scheduler_cb (struct ev_periodic *w, ev_tstamp now)	1572	my_scheduler_cb (struct ev_periodic *w, ev_tstamp now)
977	{	1573	{
978	return fmod (now, 3600.) + 3600.;	1574	return now + (3600. - fmod (now, 3600.));
979	}	1575	}
980		1576
981	ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);	1577	ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);
982		1578
983	Example: call a callback every hour, starting now:	1579	Example: Call a callback every hour, starting now:
984		1580
985	struct ev_periodic hourly_tick;	1581	struct ev_periodic hourly_tick;
986	ev_periodic_init (&hourly_tick, clock_cb,	1582	ev_periodic_init (&hourly_tick, clock_cb,
987	fmod (ev_now (loop), 3600.), 3600., 0);	1583	fmod (ev_now (loop), 3600.), 3600., 0);
988	ev_periodic_start (loop, &hourly_tick);	1584	ev_periodic_start (loop, &hourly_tick);
989		1585
990		1586
991	=head2 C<ev_signal> - signal me when a signal gets signalled	1587	=head2 C<ev_signal> - signal me when a signal gets signalled!
992		1588
993	Signal watchers will trigger an event when the process receives a specific	1589	Signal watchers will trigger an event when the process receives a specific
994	signal one or more times. Even though signals are very asynchronous, libev	1590	signal one or more times. Even though signals are very asynchronous, libev
995	will try it's best to deliver signals synchronously, i.e. as part of the	1591	will try it's best to deliver signals synchronously, i.e. as part of the
996	normal event processing, like any other event.	1592	normal event processing, like any other event.
997		1593
		1594	If you want signals asynchronously, just use C<sigaction> as you would
		1595	do without libev and forget about sharing the signal. You can even use
		1596	C<ev_async> from a signal handler to synchronously wake up an event loop.
		1597
998	You can configure as many watchers as you like per signal. Only when the	1598	You can configure as many watchers as you like per signal. Only when the
999	first watcher gets started will libev actually register a signal watcher	1599	first watcher gets started will libev actually register a signal handler
1000	with the kernel (thus it coexists with your own signal handlers as long	1600	with the kernel (thus it coexists with your own signal handlers as long as
1001	as you don't register any with libev). Similarly, when the last signal	1601	you don't register any with libev for the same signal). Similarly, when
1002	watcher for a signal is stopped libev will reset the signal handler to	1602	the last signal watcher for a signal is stopped, libev will reset the
1003	SIG_DFL (regardless of what it was set to before).	1603	signal handler to SIG_DFL (regardless of what it was set to before).
		1604
		1605	If possible and supported, libev will install its handlers with
		1606	C<SA_RESTART> behaviour enabled, so system calls should not be unduly
		1607	interrupted. If you have a problem with system calls getting interrupted by
		1608	signals you can block all signals in an C<ev_check> watcher and unblock
		1609	them in an C<ev_prepare> watcher.
		1610
		1611	=head3 Watcher-Specific Functions and Data Members
1004		1612
1005	=over 4	1613	=over 4
1006		1614
1007	=item ev_signal_init (ev_signal *, callback, int signum)	1615	=item ev_signal_init (ev_signal *, callback, int signum)
1008		1616
1009	=item ev_signal_set (ev_signal *, int signum)	1617	=item ev_signal_set (ev_signal *, int signum)
1010		1618
1011	Configures the watcher to trigger on the given signal number (usually one	1619	Configures the watcher to trigger on the given signal number (usually one
1012	of the C<SIGxxx> constants).	1620	of the C<SIGxxx> constants).
1013		1621
		1622	=item int signum [read-only]
		1623
		1624	The signal the watcher watches out for.
		1625
1014	=back	1626	=back
1015		1627
		1628	=head3 Examples
1016		1629
		1630	Example: Try to exit cleanly on SIGINT and SIGTERM.
		1631
		1632	static void
		1633	sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)
		1634	{
		1635	ev_unloop (loop, EVUNLOOP_ALL);
		1636	}
		1637
		1638	struct ev_signal signal_watcher;
		1639	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
		1640	ev_signal_start (loop, &sigint_cb);
		1641
		1642
1017	=head2 C<ev_child> - wait for pid status changes	1643	=head2 C<ev_child> - watch out for process status changes
1018		1644
1019	Child watchers trigger when your process receives a SIGCHLD in response to	1645	Child watchers trigger when your process receives a SIGCHLD in response to
1020	some child status changes (most typically when a child of yours dies).	1646	some child status changes (most typically when a child of yours dies or
		1647	exits). It is permissible to install a child watcher I<after> the child
		1648	has been forked (which implies it might have already exited), as long
		1649	as the event loop isn't entered (or is continued from a watcher), i.e.,
		1650	forking and then immediately registering a watcher for the child is fine,
		1651	but forking and registering a watcher a few event loop iterations later is
		1652	not.
		1653
		1654	Only the default event loop is capable of handling signals, and therefore
		1655	you can only register child watchers in the default event loop.
		1656
		1657	=head3 Process Interaction
		1658
		1659	Libev grabs C<SIGCHLD> as soon as the default event loop is
		1660	initialised. This is necessary to guarantee proper behaviour even if
		1661	the first child watcher is started after the child exits. The occurrence
		1662	of C<SIGCHLD> is recorded asynchronously, but child reaping is done
		1663	synchronously as part of the event loop processing. Libev always reaps all
		1664	children, even ones not watched.
		1665
		1666	=head3 Overriding the Built-In Processing
		1667
		1668	Libev offers no special support for overriding the built-in child
		1669	processing, but if your application collides with libev's default child
		1670	handler, you can override it easily by installing your own handler for
		1671	C<SIGCHLD> after initialising the default loop, and making sure the
		1672	default loop never gets destroyed. You are encouraged, however, to use an
		1673	event-based approach to child reaping and thus use libev's support for
		1674	that, so other libev users can use C<ev_child> watchers freely.
		1675
		1676	=head3 Stopping the Child Watcher
		1677
		1678	Currently, the child watcher never gets stopped, even when the
		1679	child terminates, so normally one needs to stop the watcher in the
		1680	callback. Future versions of libev might stop the watcher automatically
		1681	when a child exit is detected.
		1682
		1683	=head3 Watcher-Specific Functions and Data Members
1021		1684
1022	=over 4	1685	=over 4
1023		1686
1024	=item ev_child_init (ev_child *, callback, int pid)	1687	=item ev_child_init (ev_child *, callback, int pid, int trace)
1025		1688
1026	=item ev_child_set (ev_child *, int pid)	1689	=item ev_child_set (ev_child *, int pid, int trace)
1027		1690
1028	Configures the watcher to wait for status changes of process C<pid> (or	1691	Configures the watcher to wait for status changes of process C<pid> (or
1029	I<any> process if C<pid> is specified as C<0>). The callback can look	1692	I<any> process if C<pid> is specified as C<0>). The callback can look
1030	at the C<rstatus> member of the C<ev_child> watcher structure to see	1693	at the C<rstatus> member of the C<ev_child> watcher structure to see
1031	the status word (use the macros from C<sys/wait.h> and see your systems	1694	the status word (use the macros from C<sys/wait.h> and see your systems
1032	C<waitpid> documentation). The C<rpid> member contains the pid of the	1695	C<waitpid> documentation). The C<rpid> member contains the pid of the
1033	process causing the status change.	1696	process causing the status change. C<trace> must be either C<0> (only
		1697	activate the watcher when the process terminates) or C<1> (additionally
		1698	activate the watcher when the process is stopped or continued).
		1699
		1700	=item int pid [read-only]
		1701
		1702	The process id this watcher watches out for, or C<0>, meaning any process id.
		1703
		1704	=item int rpid [read-write]
		1705
		1706	The process id that detected a status change.
		1707
		1708	=item int rstatus [read-write]
		1709
		1710	The process exit/trace status caused by C<rpid> (see your systems
		1711	C<waitpid> and C<sys/wait.h> documentation for details).
1034		1712
1035	=back	1713	=back
1036		1714
1037	Example: try to exit cleanly on SIGINT and SIGTERM.	1715	=head3 Examples
1038		1716
		1717	Example: C<fork()> a new process and install a child handler to wait for
		1718	its completion.
		1719
		1720	ev_child cw;
		1721
1039	static void	1722	static void
1040	sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)	1723	child_cb (EV_P_ struct ev_child *w, int revents)
1041	{	1724	{
1042	ev_unloop (loop, EVUNLOOP_ALL);	1725	ev_child_stop (EV_A_ w);
		1726	printf ("process %d exited with status %x\n", w->rpid, w->rstatus);
1043	}	1727	}
1044		1728
1045	struct ev_signal signal_watcher;	1729	pid_t pid = fork ();
1046	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
1047	ev_signal_start (loop, &sigint_cb);
1048		1730
		1731	if (pid < 0)
		1732	// error
		1733	else if (pid == 0)
		1734	{
		1735	// the forked child executes here
		1736	exit (1);
		1737	}
		1738	else
		1739	{
		1740	ev_child_init (&cw, child_cb, pid, 0);
		1741	ev_child_start (EV_DEFAULT_ &cw);
		1742	}
1049		1743
		1744
		1745	=head2 C<ev_stat> - did the file attributes just change?
		1746
		1747	This watches a file system path for attribute changes. That is, it calls
		1748	C<stat> regularly (or when the OS says it changed) and sees if it changed
		1749	compared to the last time, invoking the callback if it did.
		1750
		1751	The path does not need to exist: changing from "path exists" to "path does
		1752	not exist" is a status change like any other. The condition "path does
		1753	not exist" is signified by the C<st_nlink> field being zero (which is
		1754	otherwise always forced to be at least one) and all the other fields of
		1755	the stat buffer having unspecified contents.
		1756
		1757	The path I<should> be absolute and I<must not> end in a slash. If it is
		1758	relative and your working directory changes, the behaviour is undefined.
		1759
		1760	Since there is no standard kernel interface to do this, the portable
		1761	implementation simply calls C<stat (2)> regularly on the path to see if
		1762	it changed somehow. You can specify a recommended polling interval for
		1763	this case. If you specify a polling interval of C<0> (highly recommended!)
		1764	then a I<suitable, unspecified default> value will be used (which
		1765	you can expect to be around five seconds, although this might change
		1766	dynamically). Libev will also impose a minimum interval which is currently
		1767	around C<0.1>, but thats usually overkill.
		1768
		1769	This watcher type is not meant for massive numbers of stat watchers,
		1770	as even with OS-supported change notifications, this can be
		1771	resource-intensive.
		1772
		1773	At the time of this writing, the only OS-specific interface implemented
		1774	is the Linux inotify interface (implementing kqueue support is left as
		1775	an exercise for the reader. Note, however, that the author sees no way
		1776	of implementing C<ev_stat> semantics with kqueue).
		1777
		1778	=head3 ABI Issues (Largefile Support)
		1779
		1780	Libev by default (unless the user overrides this) uses the default
		1781	compilation environment, which means that on systems with large file
		1782	support disabled by default, you get the 32 bit version of the stat
		1783	structure. When using the library from programs that change the ABI to
		1784	use 64 bit file offsets the programs will fail. In that case you have to
		1785	compile libev with the same flags to get binary compatibility. This is
		1786	obviously the case with any flags that change the ABI, but the problem is
		1787	most noticeably disabled with ev_stat and large file support.
		1788
		1789	The solution for this is to lobby your distribution maker to make large
		1790	file interfaces available by default (as e.g. FreeBSD does) and not
		1791	optional. Libev cannot simply switch on large file support because it has
		1792	to exchange stat structures with application programs compiled using the
		1793	default compilation environment.
		1794
		1795	=head3 Inotify and Kqueue
		1796
		1797	When C<inotify (7)> support has been compiled into libev (generally only
		1798	available with Linux) and present at runtime, it will be used to speed up
		1799	change detection where possible. The inotify descriptor will be created lazily
		1800	when the first C<ev_stat> watcher is being started.
		1801
		1802	Inotify presence does not change the semantics of C<ev_stat> watchers
		1803	except that changes might be detected earlier, and in some cases, to avoid
		1804	making regular C<stat> calls. Even in the presence of inotify support
		1805	there are many cases where libev has to resort to regular C<stat> polling,
		1806	but as long as the path exists, libev usually gets away without polling.
		1807
		1808	There is no support for kqueue, as apparently it cannot be used to
		1809	implement this functionality, due to the requirement of having a file
		1810	descriptor open on the object at all times, and detecting renames, unlinks
		1811	etc. is difficult.
		1812
		1813	=head3 The special problem of stat time resolution
		1814
		1815	The C<stat ()> system call only supports full-second resolution portably, and
		1816	even on systems where the resolution is higher, most file systems still
		1817	only support whole seconds.
		1818
		1819	That means that, if the time is the only thing that changes, you can
		1820	easily miss updates: on the first update, C<ev_stat> detects a change and
		1821	calls your callback, which does something. When there is another update
		1822	within the same second, C<ev_stat> will be unable to detect unless the
		1823	stat data does change in other ways (e.g. file size).
		1824
		1825	The solution to this is to delay acting on a change for slightly more
		1826	than a second (or till slightly after the next full second boundary), using
		1827	a roughly one-second-delay C<ev_timer> (e.g. C<ev_timer_set (w, 0., 1.02);
		1828	ev_timer_again (loop, w)>).
		1829
		1830	The C<.02> offset is added to work around small timing inconsistencies
		1831	of some operating systems (where the second counter of the current time
		1832	might be be delayed. One such system is the Linux kernel, where a call to
		1833	C<gettimeofday> might return a timestamp with a full second later than
		1834	a subsequent C<time> call - if the equivalent of C<time ()> is used to
		1835	update file times then there will be a small window where the kernel uses
		1836	the previous second to update file times but libev might already execute
		1837	the timer callback).
		1838
		1839	=head3 Watcher-Specific Functions and Data Members
		1840
		1841	=over 4
		1842
		1843	=item ev_stat_init (ev_stat *, callback, const char *path, ev_tstamp interval)
		1844
		1845	=item ev_stat_set (ev_stat *, const char *path, ev_tstamp interval)
		1846
		1847	Configures the watcher to wait for status changes of the given
		1848	C<path>. The C<interval> is a hint on how quickly a change is expected to
		1849	be detected and should normally be specified as C<0> to let libev choose
		1850	a suitable value. The memory pointed to by C<path> must point to the same
		1851	path for as long as the watcher is active.
		1852
		1853	The callback will receive an C<EV_STAT> event when a change was detected,
		1854	relative to the attributes at the time the watcher was started (or the
		1855	last change was detected).
		1856
		1857	=item ev_stat_stat (loop, ev_stat *)
		1858
		1859	Updates the stat buffer immediately with new values. If you change the
		1860	watched path in your callback, you could call this function to avoid
		1861	detecting this change (while introducing a race condition if you are not
		1862	the only one changing the path). Can also be useful simply to find out the
		1863	new values.
		1864
		1865	=item ev_statdata attr [read-only]
		1866
		1867	The most-recently detected attributes of the file. Although the type is
		1868	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types
		1869	suitable for your system, but you can only rely on the POSIX-standardised
		1870	members to be present. If the C<st_nlink> member is C<0>, then there was
		1871	some error while C<stat>ing the file.
		1872
		1873	=item ev_statdata prev [read-only]
		1874
		1875	The previous attributes of the file. The callback gets invoked whenever
		1876	C<prev> != C<attr>, or, more precisely, one or more of these members
		1877	differ: C<st_dev>, C<st_ino>, C<st_mode>, C<st_nlink>, C<st_uid>,
		1878	C<st_gid>, C<st_rdev>, C<st_size>, C<st_atime>, C<st_mtime>, C<st_ctime>.
		1879
		1880	=item ev_tstamp interval [read-only]
		1881
		1882	The specified interval.
		1883
		1884	=item const char *path [read-only]
		1885
		1886	The file system path that is being watched.
		1887
		1888	=back
		1889
		1890	=head3 Examples
		1891
		1892	Example: Watch C</etc/passwd> for attribute changes.
		1893
		1894	static void
		1895	passwd_cb (struct ev_loop *loop, ev_stat *w, int revents)
		1896	{
		1897	/* /etc/passwd changed in some way */
		1898	if (w->attr.st_nlink)
		1899	{
		1900	printf ("passwd current size %ld\n", (long)w->attr.st_size);
		1901	printf ("passwd current atime %ld\n", (long)w->attr.st_mtime);
		1902	printf ("passwd current mtime %ld\n", (long)w->attr.st_mtime);
		1903	}
		1904	else
		1905	/* you shalt not abuse printf for puts */
		1906	puts ("wow, /etc/passwd is not there, expect problems. "
		1907	"if this is windows, they already arrived\n");
		1908	}
		1909
		1910	...
		1911	ev_stat passwd;
		1912
		1913	ev_stat_init (&passwd, passwd_cb, "/etc/passwd", 0.);
		1914	ev_stat_start (loop, &passwd);
		1915
		1916	Example: Like above, but additionally use a one-second delay so we do not
		1917	miss updates (however, frequent updates will delay processing, too, so
		1918	one might do the work both on C<ev_stat> callback invocation I<and> on
		1919	C<ev_timer> callback invocation).
		1920
		1921	static ev_stat passwd;
		1922	static ev_timer timer;
		1923
		1924	static void
		1925	timer_cb (EV_P_ ev_timer *w, int revents)
		1926	{
		1927	ev_timer_stop (EV_A_ w);
		1928
		1929	/* now it's one second after the most recent passwd change */
		1930	}
		1931
		1932	static void
		1933	stat_cb (EV_P_ ev_stat *w, int revents)
		1934	{
		1935	/* reset the one-second timer */
		1936	ev_timer_again (EV_A_ &timer);
		1937	}
		1938
		1939	...
		1940	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);
		1941	ev_stat_start (loop, &passwd);
		1942	ev_timer_init (&timer, timer_cb, 0., 1.02);
		1943
		1944
1050	=head2 C<ev_idle> - when you've got nothing better to do	1945	=head2 C<ev_idle> - when you've got nothing better to do...
1051		1946
1052	Idle watchers trigger events when there are no other events are pending	1947	Idle watchers trigger events when no other events of the same or higher
1053	(prepare, check and other idle watchers do not count). That is, as long	1948	priority are pending (prepare, check and other idle watchers do not count
1054	as your process is busy handling sockets or timeouts (or even signals,	1949	as receiving "events").
1055	imagine) it will not be triggered. But when your process is idle all idle	1950
1056	watchers are being called again and again, once per event loop iteration -	1951	That is, as long as your process is busy handling sockets or timeouts
		1952	(or even signals, imagine) of the same or higher priority it will not be
		1953	triggered. But when your process is idle (or only lower-priority watchers
		1954	are pending), the idle watchers are being called once per event loop
1057	until stopped, that is, or your process receives more events and becomes	1955	iteration - until stopped, that is, or your process receives more events
1058	busy.	1956	and becomes busy again with higher priority stuff.
1059		1957
1060	The most noteworthy effect is that as long as any idle watchers are	1958	The most noteworthy effect is that as long as any idle watchers are
1061	active, the process will not block when waiting for new events.	1959	active, the process will not block when waiting for new events.
1062		1960
1063	Apart from keeping your process non-blocking (which is a useful	1961	Apart from keeping your process non-blocking (which is a useful
1064	effect on its own sometimes), idle watchers are a good place to do	1962	effect on its own sometimes), idle watchers are a good place to do
1065	"pseudo-background processing", or delay processing stuff to after the	1963	"pseudo-background processing", or delay processing stuff to after the
1066	event loop has handled all outstanding events.	1964	event loop has handled all outstanding events.
1067		1965
		1966	=head3 Watcher-Specific Functions and Data Members
		1967
1068	=over 4	1968	=over 4
1069		1969
1070	=item ev_idle_init (ev_signal *, callback)	1970	=item ev_idle_init (ev_signal *, callback)
1071		1971
1072	Initialises and configures the idle watcher - it has no parameters of any	1972	Initialises and configures the idle watcher - it has no parameters of any
1073	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,	1973	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,
1074	believe me.	1974	believe me.
1075		1975
1076	=back	1976	=back
1077		1977
		1978	=head3 Examples
		1979
1078	Example: dynamically allocate an C<ev_idle>, start it, and in the	1980	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the
1079	callback, free it. Alos, use no error checking, as usual.	1981	callback, free it. Also, use no error checking, as usual.
1080		1982
1081	static void	1983	static void
1082	idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)	1984	idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)
1083	{	1985	{
1084	free (w);	1986	free (w);
1085	// now do something you wanted to do when the program has	1987	// now do something you wanted to do when the program has
1086	// no longer asnything immediate to do.	1988	// no longer anything immediate to do.
1087	}	1989	}
1088		1990
1089	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));	1991	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));
1090	ev_idle_init (idle_watcher, idle_cb);	1992	ev_idle_init (idle_watcher, idle_cb);
1091	ev_idle_start (loop, idle_cb);	1993	ev_idle_start (loop, idle_cb);
1092		1994
1093		1995
1094	=head2 C<ev_prepare> and C<ev_check> - customise your event loop	1996	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!
1095		1997
1096	Prepare and check watchers are usually (but not always) used in tandem:	1998	Prepare and check watchers are usually (but not always) used in pairs:
1097	prepare watchers get invoked before the process blocks and check watchers	1999	prepare watchers get invoked before the process blocks and check watchers
1098	afterwards.	2000	afterwards.
1099		2001
		2002	You I<must not> call C<ev_loop> or similar functions that enter
		2003	the current event loop from either C<ev_prepare> or C<ev_check>
		2004	watchers. Other loops than the current one are fine, however. The
		2005	rationale behind this is that you do not need to check for recursion in
		2006	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,
		2007	C<ev_check> so if you have one watcher of each kind they will always be
		2008	called in pairs bracketing the blocking call.
		2009
1100	Their main purpose is to integrate other event mechanisms into libev and	2010	Their main purpose is to integrate other event mechanisms into libev and
1101	their use is somewhat advanced. This could be used, for example, to track	2011	their use is somewhat advanced. They could be used, for example, to track
1102	variable changes, implement your own watchers, integrate net-snmp or a	2012	variable changes, implement your own watchers, integrate net-snmp or a
1103	coroutine library and lots more.	2013	coroutine library and lots more. They are also occasionally useful if
		2014	you cache some data and want to flush it before blocking (for example,
		2015	in X programs you might want to do an C<XFlush ()> in an C<ev_prepare>
		2016	watcher).
1104		2017
1105	This is done by examining in each prepare call which file descriptors need	2018	This is done by examining in each prepare call which file descriptors
1106	to be watched by the other library, registering C<ev_io> watchers for	2019	need to be watched by the other library, registering C<ev_io> watchers
1107	them and starting an C<ev_timer> watcher for any timeouts (many libraries	2020	for them and starting an C<ev_timer> watcher for any timeouts (many
1108	provide just this functionality). Then, in the check watcher you check for	2021	libraries provide exactly this functionality). Then, in the check watcher,
1109	any events that occured (by checking the pending status of all watchers	2022	you check for any events that occurred (by checking the pending status
1110	and stopping them) and call back into the library. The I/O and timer	2023	of all watchers and stopping them) and call back into the library. The
1111	callbacks will never actually be called (but must be valid nevertheless,	2024	I/O and timer callbacks will never actually be called (but must be valid
1112	because you never know, you know?).	2025	nevertheless, because you never know, you know?).
1113		2026
1114	As another example, the Perl Coro module uses these hooks to integrate	2027	As another example, the Perl Coro module uses these hooks to integrate
1115	coroutines into libev programs, by yielding to other active coroutines	2028	coroutines into libev programs, by yielding to other active coroutines
1116	during each prepare and only letting the process block if no coroutines	2029	during each prepare and only letting the process block if no coroutines
1117	are ready to run (it's actually more complicated: it only runs coroutines	2030	are ready to run (it's actually more complicated: it only runs coroutines
1118	with priority higher than or equal to the event loop and one coroutine	2031	with priority higher than or equal to the event loop and one coroutine
1119	of lower priority, but only once, using idle watchers to keep the event	2032	of lower priority, but only once, using idle watchers to keep the event
1120	loop from blocking if lower-priority coroutines are active, thus mapping	2033	loop from blocking if lower-priority coroutines are active, thus mapping
1121	low-priority coroutines to idle/background tasks).	2034	low-priority coroutines to idle/background tasks).
1122		2035
		2036	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)
		2037	priority, to ensure that they are being run before any other watchers
		2038	after the poll (this doesn't matter for C<ev_prepare> watchers).
		2039
		2040	Also, C<ev_check> watchers (and C<ev_prepare> watchers, too) should not
		2041	activate ("feed") events into libev. While libev fully supports this, they
		2042	might get executed before other C<ev_check> watchers did their job. As
		2043	C<ev_check> watchers are often used to embed other (non-libev) event
		2044	loops those other event loops might be in an unusable state until their
		2045	C<ev_check> watcher ran (always remind yourself to coexist peacefully with
		2046	others).
		2047
		2048	=head3 Watcher-Specific Functions and Data Members
		2049
1123	=over 4	2050	=over 4
1124		2051
1125	=item ev_prepare_init (ev_prepare *, callback)	2052	=item ev_prepare_init (ev_prepare *, callback)
1126		2053
1127	=item ev_check_init (ev_check *, callback)	2054	=item ev_check_init (ev_check *, callback)
1128		2055
1129	Initialises and configures the prepare or check watcher - they have no	2056	Initialises and configures the prepare or check watcher - they have no
1130	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>	2057	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>
1131	macros, but using them is utterly, utterly and completely pointless.	2058	macros, but using them is utterly, utterly, utterly and completely
		2059	pointless.
1132		2060
1133	=back	2061	=back
1134		2062
1135	Example: *TODO*.	2063	=head3 Examples
1136		2064
		2065	There are a number of principal ways to embed other event loops or modules
		2066	into libev. Here are some ideas on how to include libadns into libev
		2067	(there is a Perl module named C<EV::ADNS> that does this, which you could
		2068	use as a working example. Another Perl module named C<EV::Glib> embeds a
		2069	Glib main context into libev, and finally, C<Glib::EV> embeds EV into the
		2070	Glib event loop).
1137		2071
		2072	Method 1: Add IO watchers and a timeout watcher in a prepare handler,
		2073	and in a check watcher, destroy them and call into libadns. What follows
		2074	is pseudo-code only of course. This requires you to either use a low
		2075	priority for the check watcher or use C<ev_clear_pending> explicitly, as
		2076	the callbacks for the IO/timeout watchers might not have been called yet.
		2077
		2078	static ev_io iow [nfd];
		2079	static ev_timer tw;
		2080
		2081	static void
		2082	io_cb (ev_loop *loop, ev_io *w, int revents)
		2083	{
		2084	}
		2085
		2086	// create io watchers for each fd and a timer before blocking
		2087	static void
		2088	adns_prepare_cb (ev_loop *loop, ev_prepare *w, int revents)
		2089	{
		2090	int timeout = 3600000;
		2091	struct pollfd fds [nfd];
		2092	// actual code will need to loop here and realloc etc.
		2093	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
		2094
		2095	/* the callback is illegal, but won't be called as we stop during check */
		2096	ev_timer_init (&tw, 0, timeout * 1e-3);
		2097	ev_timer_start (loop, &tw);
		2098
		2099	// create one ev_io per pollfd
		2100	for (int i = 0; i < nfd; ++i)
		2101	{
		2102	ev_io_init (iow + i, io_cb, fds [i].fd,
		2103	((fds [i].events & POLLIN ? EV_READ : 0)
		2104	| (fds [i].events & POLLOUT ? EV_WRITE : 0)));
		2105
		2106	fds [i].revents = 0;
		2107	ev_io_start (loop, iow + i);
		2108	}
		2109	}
		2110
		2111	// stop all watchers after blocking
		2112	static void
		2113	adns_check_cb (ev_loop *loop, ev_check *w, int revents)
		2114	{
		2115	ev_timer_stop (loop, &tw);
		2116
		2117	for (int i = 0; i < nfd; ++i)
		2118	{
		2119	// set the relevant poll flags
		2120	// could also call adns_processreadable etc. here
		2121	struct pollfd *fd = fds + i;
		2122	int revents = ev_clear_pending (iow + i);
		2123	if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;
		2124	if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;
		2125
		2126	// now stop the watcher
		2127	ev_io_stop (loop, iow + i);
		2128	}
		2129
		2130	adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));
		2131	}
		2132
		2133	Method 2: This would be just like method 1, but you run C<adns_afterpoll>
		2134	in the prepare watcher and would dispose of the check watcher.
		2135
		2136	Method 3: If the module to be embedded supports explicit event
		2137	notification (libadns does), you can also make use of the actual watcher
		2138	callbacks, and only destroy/create the watchers in the prepare watcher.
		2139
		2140	static void
		2141	timer_cb (EV_P_ ev_timer *w, int revents)
		2142	{
		2143	adns_state ads = (adns_state)w->data;
		2144	update_now (EV_A);
		2145
		2146	adns_processtimeouts (ads, &tv_now);
		2147	}
		2148
		2149	static void
		2150	io_cb (EV_P_ ev_io *w, int revents)
		2151	{
		2152	adns_state ads = (adns_state)w->data;
		2153	update_now (EV_A);
		2154
		2155	if (revents & EV_READ ) adns_processreadable (ads, w->fd, &tv_now);
		2156	if (revents & EV_WRITE) adns_processwriteable (ads, w->fd, &tv_now);
		2157	}
		2158
		2159	// do not ever call adns_afterpoll
		2160
		2161	Method 4: Do not use a prepare or check watcher because the module you
		2162	want to embed is not flexible enough to support it. Instead, you can
		2163	override their poll function. The drawback with this solution is that the
		2164	main loop is now no longer controllable by EV. The C<Glib::EV> module uses
		2165	this approach, effectively embedding EV as a client into the horrible
		2166	libglib event loop.
		2167
		2168	static gint
		2169	event_poll_func (GPollFD *fds, guint nfds, gint timeout)
		2170	{
		2171	int got_events = 0;
		2172
		2173	for (n = 0; n < nfds; ++n)
		2174	// create/start io watcher that sets the relevant bits in fds[n] and increment got_events
		2175
		2176	if (timeout >= 0)
		2177	// create/start timer
		2178
		2179	// poll
		2180	ev_loop (EV_A_ 0);
		2181
		2182	// stop timer again
		2183	if (timeout >= 0)
		2184	ev_timer_stop (EV_A_ &to);
		2185
		2186	// stop io watchers again - their callbacks should have set
		2187	for (n = 0; n < nfds; ++n)
		2188	ev_io_stop (EV_A_ iow [n]);
		2189
		2190	return got_events;
		2191	}
		2192
		2193
1138	=head2 C<ev_embed> - when one backend isn't enough	2194	=head2 C<ev_embed> - when one backend isn't enough...
1139		2195
1140	This is a rather advanced watcher type that lets you embed one event loop	2196	This is a rather advanced watcher type that lets you embed one event loop
1141	into another (currently only C<ev_io> events are supported in the embedded	2197	into another (currently only C<ev_io> events are supported in the embedded
1142	loop, other types of watchers might be handled in a delayed or incorrect	2198	loop, other types of watchers might be handled in a delayed or incorrect
1143	fashion and must not be used).	2199	fashion and must not be used).
…		…
1146	prioritise I/O.	2202	prioritise I/O.
1147		2203
1148	As an example for a bug workaround, the kqueue backend might only support	2204	As an example for a bug workaround, the kqueue backend might only support
1149	sockets on some platform, so it is unusable as generic backend, but you	2205	sockets on some platform, so it is unusable as generic backend, but you
1150	still want to make use of it because you have many sockets and it scales	2206	still want to make use of it because you have many sockets and it scales
1151	so nicely. In this case, you would create a kqueue-based loop and embed it	2207	so nicely. In this case, you would create a kqueue-based loop and embed
1152	into your default loop (which might use e.g. poll). Overall operation will	2208	it into your default loop (which might use e.g. poll). Overall operation
1153	be a bit slower because first libev has to poll and then call kevent, but	2209	will be a bit slower because first libev has to call C<poll> and then
1154	at least you can use both at what they are best.	2210	C<kevent>, but at least you can use both mechanisms for what they are
		2211	best: C<kqueue> for scalable sockets and C<poll> if you want it to work :)
1155		2212
1156	As for prioritising I/O: rarely you have the case where some fds have	2213	As for prioritising I/O: under rare circumstances you have the case where
1157	to be watched and handled very quickly (with low latency), and even	2214	some fds have to be watched and handled very quickly (with low latency),
1158	priorities and idle watchers might have too much overhead. In this case	2215	and even priorities and idle watchers might have too much overhead. In
1159	you would put all the high priority stuff in one loop and all the rest in	2216	this case you would put all the high priority stuff in one loop and all
1160	a second one, and embed the second one in the first.	2217	the rest in a second one, and embed the second one in the first.
1161		2218
1162	As long as the watcher is active, the callback will be invoked every time	2219	As long as the watcher is active, the callback will be invoked every time
1163	there might be events pending in the embedded loop. The callback must then	2220	there might be events pending in the embedded loop. The callback must then
1164	call C<ev_embed_sweep (mainloop, watcher)> to make a single sweep and invoke	2221	call C<ev_embed_sweep (mainloop, watcher)> to make a single sweep and invoke
1165	their callbacks (you could also start an idle watcher to give the embedded	2222	their callbacks (you could also start an idle watcher to give the embedded
…		…
1173	interested in that.	2230	interested in that.
1174		2231
1175	Also, there have not currently been made special provisions for forking:	2232	Also, there have not currently been made special provisions for forking:
1176	when you fork, you not only have to call C<ev_loop_fork> on both loops,	2233	when you fork, you not only have to call C<ev_loop_fork> on both loops,
1177	but you will also have to stop and restart any C<ev_embed> watchers	2234	but you will also have to stop and restart any C<ev_embed> watchers
1178	yourself.	2235	yourself - but you can use a fork watcher to handle this automatically,
		2236	and future versions of libev might do just that.
1179		2237
1180	Unfortunately, not all backends are embeddable, only the ones returned by	2238	Unfortunately, not all backends are embeddable, only the ones returned by
1181	C<ev_embeddable_backends> are, which, unfortunately, does not include any	2239	C<ev_embeddable_backends> are, which, unfortunately, does not include any
1182	portable one.	2240	portable one.
1183		2241
1184	So when you want to use this feature you will always have to be prepared	2242	So when you want to use this feature you will always have to be prepared
1185	that you cannot get an embeddable loop. The recommended way to get around	2243	that you cannot get an embeddable loop. The recommended way to get around
1186	this is to have a separate variables for your embeddable loop, try to	2244	this is to have a separate variables for your embeddable loop, try to
1187	create it, and if that fails, use the normal loop for everything:	2245	create it, and if that fails, use the normal loop for everything.
1188		2246
1189	struct ev_loop *loop_hi = ev_default_init (0);	2247	=head3 Watcher-Specific Functions and Data Members
1190	struct ev_loop *loop_lo = 0;
1191	struct ev_embed embed;
1192
1193	// see if there is a chance of getting one that works
1194	// (remember that a flags value of 0 means autodetection)
1195	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()
1196	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())
1197	: 0;
1198
1199	// if we got one, then embed it, otherwise default to loop_hi
1200	if (loop_lo)
1201	{
1202	ev_embed_init (&embed, 0, loop_lo);
1203	ev_embed_start (loop_hi, &embed);
1204	}
1205	else
1206	loop_lo = loop_hi;
1207		2248
1208	=over 4	2249	=over 4
1209		2250
1210	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)	2251	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
1211		2252
…		…
1213		2254
1214	Configures the watcher to embed the given loop, which must be	2255	Configures the watcher to embed the given loop, which must be
1215	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be	2256	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
1216	invoked automatically, otherwise it is the responsibility of the callback	2257	invoked automatically, otherwise it is the responsibility of the callback
1217	to invoke it (it will continue to be called until the sweep has been done,	2258	to invoke it (it will continue to be called until the sweep has been done,
1218	if you do not want thta, you need to temporarily stop the embed watcher).	2259	if you do not want that, you need to temporarily stop the embed watcher).
1219		2260
1220	=item ev_embed_sweep (loop, ev_embed *)	2261	=item ev_embed_sweep (loop, ev_embed *)
1221		2262
1222	Make a single, non-blocking sweep over the embedded loop. This works	2263	Make a single, non-blocking sweep over the embedded loop. This works
1223	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	2264	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
1224	apropriate way for embedded loops.	2265	appropriate way for embedded loops.
		2266
		2267	=item struct ev_loop *other [read-only]
		2268
		2269	The embedded event loop.
		2270
		2271	=back
		2272
		2273	=head3 Examples
		2274
		2275	Example: Try to get an embeddable event loop and embed it into the default
		2276	event loop. If that is not possible, use the default loop. The default
		2277	loop is stored in C<loop_hi>, while the embeddable loop is stored in
		2278	C<loop_lo> (which is C<loop_hi> in the case no embeddable loop can be
		2279	used).
		2280
		2281	struct ev_loop *loop_hi = ev_default_init (0);
		2282	struct ev_loop *loop_lo = 0;
		2283	struct ev_embed embed;
		2284
		2285	// see if there is a chance of getting one that works
		2286	// (remember that a flags value of 0 means autodetection)
		2287	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()
		2288	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())
		2289	: 0;
		2290
		2291	// if we got one, then embed it, otherwise default to loop_hi
		2292	if (loop_lo)
		2293	{
		2294	ev_embed_init (&embed, 0, loop_lo);
		2295	ev_embed_start (loop_hi, &embed);
		2296	}
		2297	else
		2298	loop_lo = loop_hi;
		2299
		2300	Example: Check if kqueue is available but not recommended and create
		2301	a kqueue backend for use with sockets (which usually work with any
		2302	kqueue implementation). Store the kqueue/socket-only event loop in
		2303	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
		2304
		2305	struct ev_loop *loop = ev_default_init (0);
		2306	struct ev_loop *loop_socket = 0;
		2307	struct ev_embed embed;
		2308
		2309	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
		2310	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
		2311	{
		2312	ev_embed_init (&embed, 0, loop_socket);
		2313	ev_embed_start (loop, &embed);
		2314	}
		2315
		2316	if (!loop_socket)
		2317	loop_socket = loop;
		2318
		2319	// now use loop_socket for all sockets, and loop for everything else
		2320
		2321
		2322	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
		2323
		2324	Fork watchers are called when a C<fork ()> was detected (usually because
		2325	whoever is a good citizen cared to tell libev about it by calling
		2326	C<ev_default_fork> or C<ev_loop_fork>). The invocation is done before the
		2327	event loop blocks next and before C<ev_check> watchers are being called,
		2328	and only in the child after the fork. If whoever good citizen calling
		2329	C<ev_default_fork> cheats and calls it in the wrong process, the fork
		2330	handlers will be invoked, too, of course.
		2331
		2332	=head3 Watcher-Specific Functions and Data Members
		2333
		2334	=over 4
		2335
		2336	=item ev_fork_init (ev_signal *, callback)
		2337
		2338	Initialises and configures the fork watcher - it has no parameters of any
		2339	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
		2340	believe me.
		2341
		2342	=back
		2343
		2344
		2345	=head2 C<ev_async> - how to wake up another event loop
		2346
		2347	In general, you cannot use an C<ev_loop> from multiple threads or other
		2348	asynchronous sources such as signal handlers (as opposed to multiple event
		2349	loops - those are of course safe to use in different threads).
		2350
		2351	Sometimes, however, you need to wake up another event loop you do not
		2352	control, for example because it belongs to another thread. This is what
		2353	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you
		2354	can signal it by calling C<ev_async_send>, which is thread- and signal
		2355	safe.
		2356
		2357	This functionality is very similar to C<ev_signal> watchers, as signals,
		2358	too, are asynchronous in nature, and signals, too, will be compressed
		2359	(i.e. the number of callback invocations may be less than the number of
		2360	C<ev_async_sent> calls).
		2361
		2362	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not
		2363	just the default loop.
		2364
		2365	=head3 Queueing
		2366
		2367	C<ev_async> does not support queueing of data in any way. The reason
		2368	is that the author does not know of a simple (or any) algorithm for a
		2369	multiple-writer-single-reader queue that works in all cases and doesn't
		2370	need elaborate support such as pthreads.
		2371
		2372	That means that if you want to queue data, you have to provide your own
		2373	queue. But at least I can tell you would implement locking around your
		2374	queue:
		2375
		2376	=over 4
		2377
		2378	=item queueing from a signal handler context
		2379
		2380	To implement race-free queueing, you simply add to the queue in the signal
		2381	handler but you block the signal handler in the watcher callback. Here is an example that does that for
		2382	some fictitious SIGUSR1 handler:
		2383
		2384	static ev_async mysig;
		2385
		2386	static void
		2387	sigusr1_handler (void)
		2388	{
		2389	sometype data;
		2390
		2391	// no locking etc.
		2392	queue_put (data);
		2393	ev_async_send (EV_DEFAULT_ &mysig);
		2394	}
		2395
		2396	static void
		2397	mysig_cb (EV_P_ ev_async *w, int revents)
		2398	{
		2399	sometype data;
		2400	sigset_t block, prev;
		2401
		2402	sigemptyset (&block);
		2403	sigaddset (&block, SIGUSR1);
		2404	sigprocmask (SIG_BLOCK, &block, &prev);
		2405
		2406	while (queue_get (&data))
		2407	process (data);
		2408
		2409	if (sigismember (&prev, SIGUSR1)
		2410	sigprocmask (SIG_UNBLOCK, &block, 0);
		2411	}
		2412
		2413	(Note: pthreads in theory requires you to use C<pthread_setmask>
		2414	instead of C<sigprocmask> when you use threads, but libev doesn't do it
		2415	either...).
		2416
		2417	=item queueing from a thread context
		2418
		2419	The strategy for threads is different, as you cannot (easily) block
		2420	threads but you can easily preempt them, so to queue safely you need to
		2421	employ a traditional mutex lock, such as in this pthread example:
		2422
		2423	static ev_async mysig;
		2424	static pthread_mutex_t mymutex = PTHREAD_MUTEX_INITIALIZER;
		2425
		2426	static void
		2427	otherthread (void)
		2428	{
		2429	// only need to lock the actual queueing operation
		2430	pthread_mutex_lock (&mymutex);
		2431	queue_put (data);
		2432	pthread_mutex_unlock (&mymutex);
		2433
		2434	ev_async_send (EV_DEFAULT_ &mysig);
		2435	}
		2436
		2437	static void
		2438	mysig_cb (EV_P_ ev_async *w, int revents)
		2439	{
		2440	pthread_mutex_lock (&mymutex);
		2441
		2442	while (queue_get (&data))
		2443	process (data);
		2444
		2445	pthread_mutex_unlock (&mymutex);
		2446	}
		2447
		2448	=back
		2449
		2450
		2451	=head3 Watcher-Specific Functions and Data Members
		2452
		2453	=over 4
		2454
		2455	=item ev_async_init (ev_async *, callback)
		2456
		2457	Initialises and configures the async watcher - it has no parameters of any
		2458	kind. There is a C<ev_asynd_set> macro, but using it is utterly pointless,
		2459	believe me.
		2460
		2461	=item ev_async_send (loop, ev_async *)
		2462
		2463	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
		2464	an C<EV_ASYNC> event on the watcher into the event loop. Unlike
		2465	C<ev_feed_event>, this call is safe to do in other threads, signal or
		2466	similar contexts (see the discussion of C<EV_ATOMIC_T> in the embedding
		2467	section below on what exactly this means).
		2468
		2469	This call incurs the overhead of a system call only once per loop iteration,
		2470	so while the overhead might be noticeable, it doesn't apply to repeated
		2471	calls to C<ev_async_send>.
		2472
		2473	=item bool = ev_async_pending (ev_async *)
		2474
		2475	Returns a non-zero value when C<ev_async_send> has been called on the
		2476	watcher but the event has not yet been processed (or even noted) by the
		2477	event loop.
		2478
		2479	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When
		2480	the loop iterates next and checks for the watcher to have become active,
		2481	it will reset the flag again. C<ev_async_pending> can be used to very
		2482	quickly check whether invoking the loop might be a good idea.
		2483
		2484	Not that this does I<not> check whether the watcher itself is pending, only
		2485	whether it has been requested to make this watcher pending.
1225		2486
1226	=back	2487	=back
1227		2488
1228		2489
1229	=head1 OTHER FUNCTIONS	2490	=head1 OTHER FUNCTIONS
…		…
1240	or timeout without having to allocate/configure/start/stop/free one or	2501	or timeout without having to allocate/configure/start/stop/free one or
1241	more watchers yourself.	2502	more watchers yourself.
1242		2503
1243	If C<fd> is less than 0, then no I/O watcher will be started and events	2504	If C<fd> is less than 0, then no I/O watcher will be started and events
1244	is being ignored. Otherwise, an C<ev_io> watcher for the given C<fd> and	2505	is being ignored. Otherwise, an C<ev_io> watcher for the given C<fd> and
1245	C<events> set will be craeted and started.	2506	C<events> set will be created and started.
1246		2507
1247	If C<timeout> is less than 0, then no timeout watcher will be	2508	If C<timeout> is less than 0, then no timeout watcher will be
1248	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and	2509	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
1249	repeat = 0) will be started. While C<0> is a valid timeout, it is of	2510	repeat = 0) will be started. While C<0> is a valid timeout, it is of
1250	dubious value.	2511	dubious value.
…		…
1252	The callback has the type C<void (*cb)(int revents, void *arg)> and gets	2513	The callback has the type C<void (*cb)(int revents, void *arg)> and gets
1253	passed an C<revents> set like normal event callbacks (a combination of	2514	passed an C<revents> set like normal event callbacks (a combination of
1254	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>	2515	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>
1255	value passed to C<ev_once>:	2516	value passed to C<ev_once>:
1256		2517
1257	static void stdin_ready (int revents, void *arg)	2518	static void stdin_ready (int revents, void *arg)
1258	{	2519	{
1259	if (revents & EV_TIMEOUT)	2520	if (revents & EV_TIMEOUT)
1260	/* doh, nothing entered */;	2521	/* doh, nothing entered */;
1261	else if (revents & EV_READ)	2522	else if (revents & EV_READ)
1262	/* stdin might have data for us, joy! */;	2523	/* stdin might have data for us, joy! */;
1263	}	2524	}
1264		2525
1265	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	2526	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
1266		2527
1267	=item ev_feed_event (ev_loop *, watcher *, int revents)	2528	=item ev_feed_event (ev_loop *, watcher *, int revents)
1268		2529
1269	Feeds the given event set into the event loop, as if the specified event	2530	Feeds the given event set into the event loop, as if the specified event
1270	had happened for the specified watcher (which must be a pointer to an	2531	had happened for the specified watcher (which must be a pointer to an
…		…
1275	Feed an event on the given fd, as if a file descriptor backend detected	2536	Feed an event on the given fd, as if a file descriptor backend detected
1276	the given events it.	2537	the given events it.
1277		2538
1278	=item ev_feed_signal_event (ev_loop *loop, int signum)	2539	=item ev_feed_signal_event (ev_loop *loop, int signum)
1279		2540
1280	Feed an event as if the given signal occured (C<loop> must be the default	2541	Feed an event as if the given signal occurred (C<loop> must be the default
1281	loop!).	2542	loop!).
1282		2543
1283	=back	2544	=back
1284		2545
1285		2546
…		…
1301		2562
1302	=item * Priorities are not currently supported. Initialising priorities	2563	=item * Priorities are not currently supported. Initialising priorities
1303	will fail and all watchers will have the same priority, even though there	2564	will fail and all watchers will have the same priority, even though there
1304	is an ev_pri field.	2565	is an ev_pri field.
1305		2566
		2567	=item * In libevent, the last base created gets the signals, in libev, the
		2568	first base created (== the default loop) gets the signals.
		2569
1306	=item * Other members are not supported.	2570	=item * Other members are not supported.
1307		2571
1308	=item * The libev emulation is I<not> ABI compatible to libevent, you need	2572	=item * The libev emulation is I<not> ABI compatible to libevent, you need
1309	to use the libev header file and library.	2573	to use the libev header file and library.
1310		2574
1311	=back	2575	=back
1312		2576
1313	=head1 C++ SUPPORT	2577	=head1 C++ SUPPORT
1314		2578
1315	Libev comes with some simplistic wrapper classes for C++ that mainly allow	2579	Libev comes with some simplistic wrapper classes for C++ that mainly allow
1316	you to use some convinience methods to start/stop watchers and also change	2580	you to use some convenience methods to start/stop watchers and also change
1317	the callback model to a model using method callbacks on objects.	2581	the callback model to a model using method callbacks on objects.
1318		2582
1319	To use it,	2583	To use it,
1320		2584
1321	#include <ev++.h>	2585	#include <ev++.h>
1322		2586
1323	(it is not installed by default). This automatically includes F<ev.h>	2587	This automatically includes F<ev.h> and puts all of its definitions (many
1324	and puts all of its definitions (many of them macros) into the global	2588	of them macros) into the global namespace. All C++ specific things are
1325	namespace. All C++ specific things are put into the C<ev> namespace.	2589	put into the C<ev> namespace. It should support all the same embedding
		2590	options as F<ev.h>, most notably C<EV_MULTIPLICITY>.
1326		2591
1327	It should support all the same embedding options as F<ev.h>, most notably	2592	Care has been taken to keep the overhead low. The only data member the C++
1328	C<EV_MULTIPLICITY>.	2593	classes add (compared to plain C-style watchers) is the event loop pointer
		2594	that the watcher is associated with (or no additional members at all if
		2595	you disable C<EV_MULTIPLICITY> when embedding libev).
		2596
		2597	Currently, functions, and static and non-static member functions can be
		2598	used as callbacks. Other types should be easy to add as long as they only
		2599	need one additional pointer for context. If you need support for other
		2600	types of functors please contact the author (preferably after implementing
		2601	it).
1329		2602
1330	Here is a list of things available in the C<ev> namespace:	2603	Here is a list of things available in the C<ev> namespace:
1331		2604
1332	=over 4	2605	=over 4
1333		2606
…		…
1349		2622
1350	All of those classes have these methods:	2623	All of those classes have these methods:
1351		2624
1352	=over 4	2625	=over 4
1353		2626
1354	=item ev::TYPE::TYPE (object *, object::method *)	2627	=item ev::TYPE::TYPE ()
1355		2628
1356	=item ev::TYPE::TYPE (object *, object::method *, struct ev_loop *)	2629	=item ev::TYPE::TYPE (struct ev_loop *)
1357		2630
1358	=item ev::TYPE::~TYPE	2631	=item ev::TYPE::~TYPE
1359		2632
1360	The constructor takes a pointer to an object and a method pointer to	2633	The constructor (optionally) takes an event loop to associate the watcher
1361	the event handler callback to call in this class. The constructor calls	2634	with. If it is omitted, it will use C<EV_DEFAULT>.
1362	C<ev_init> for you, which means you have to call the C<set> method	2635
1363	before starting it. If you do not specify a loop then the constructor	2636	The constructor calls C<ev_init> for you, which means you have to call the
1364	automatically associates the default loop with this watcher.	2637	C<set> method before starting it.
		2638
		2639	It will not set a callback, however: You have to call the templated C<set>
		2640	method to set a callback before you can start the watcher.
		2641
		2642	(The reason why you have to use a method is a limitation in C++ which does
		2643	not allow explicit template arguments for constructors).
1365		2644
1366	The destructor automatically stops the watcher if it is active.	2645	The destructor automatically stops the watcher if it is active.
		2646
		2647	=item w->set<class, &class::method> (object *)
		2648
		2649	This method sets the callback method to call. The method has to have a
		2650	signature of C<void (*)(ev_TYPE &, int)>, it receives the watcher as
		2651	first argument and the C<revents> as second. The object must be given as
		2652	parameter and is stored in the C<data> member of the watcher.
		2653
		2654	This method synthesizes efficient thunking code to call your method from
		2655	the C callback that libev requires. If your compiler can inline your
		2656	callback (i.e. it is visible to it at the place of the C<set> call and
		2657	your compiler is good :), then the method will be fully inlined into the
		2658	thunking function, making it as fast as a direct C callback.
		2659
		2660	Example: simple class declaration and watcher initialisation
		2661
		2662	struct myclass
		2663	{
		2664	void io_cb (ev::io &w, int revents) { }
		2665	}
		2666
		2667	myclass obj;
		2668	ev::io iow;
		2669	iow.set <myclass, &myclass::io_cb> (&obj);
		2670
		2671	=item w->set<function> (void *data = 0)
		2672
		2673	Also sets a callback, but uses a static method or plain function as
		2674	callback. The optional C<data> argument will be stored in the watcher's
		2675	C<data> member and is free for you to use.
		2676
		2677	The prototype of the C<function> must be C<void (*)(ev::TYPE &w, int)>.
		2678
		2679	See the method-C<set> above for more details.
		2680
		2681	Example:
		2682
		2683	static void io_cb (ev::io &w, int revents) { }
		2684	iow.set <io_cb> ();
1367		2685
1368	=item w->set (struct ev_loop *)	2686	=item w->set (struct ev_loop *)
1369		2687
1370	Associates a different C<struct ev_loop> with this watcher. You can only	2688	Associates a different C<struct ev_loop> with this watcher. You can only
1371	do this when the watcher is inactive (and not pending either).	2689	do this when the watcher is inactive (and not pending either).
1372		2690
1373	=item w->set ([args])	2691	=item w->set ([arguments])
1374		2692
1375	Basically the same as C<ev_TYPE_set>, with the same args. Must be	2693	Basically the same as C<ev_TYPE_set>, with the same arguments. Must be
1376	called at least once. Unlike the C counterpart, an active watcher gets	2694	called at least once. Unlike the C counterpart, an active watcher gets
1377	automatically stopped and restarted.	2695	automatically stopped and restarted when reconfiguring it with this
		2696	method.
1378		2697
1379	=item w->start ()	2698	=item w->start ()
1380		2699
1381	Starts the watcher. Note that there is no C<loop> argument as the	2700	Starts the watcher. Note that there is no C<loop> argument, as the
1382	constructor already takes the loop.	2701	constructor already stores the event loop.
1383		2702
1384	=item w->stop ()	2703	=item w->stop ()
1385		2704
1386	Stops the watcher if it is active. Again, no C<loop> argument.	2705	Stops the watcher if it is active. Again, no C<loop> argument.
1387		2706
1388	=item w->again () C<ev::timer>, C<ev::periodic> only	2707	=item w->again () (C<ev::timer>, C<ev::periodic> only)
1389		2708
1390	For C<ev::timer> and C<ev::periodic>, this invokes the corresponding	2709	For C<ev::timer> and C<ev::periodic>, this invokes the corresponding
1391	C<ev_TYPE_again> function.	2710	C<ev_TYPE_again> function.
1392		2711
1393	=item w->sweep () C<ev::embed> only	2712	=item w->sweep () (C<ev::embed> only)
1394		2713
1395	Invokes C<ev_embed_sweep>.	2714	Invokes C<ev_embed_sweep>.
		2715
		2716	=item w->update () (C<ev::stat> only)
		2717
		2718	Invokes C<ev_stat_stat>.
1396		2719
1397	=back	2720	=back
1398		2721
1399	=back	2722	=back
1400		2723
1401	Example: Define a class with an IO and idle watcher, start one of them in	2724	Example: Define a class with an IO and idle watcher, start one of them in
1402	the constructor.	2725	the constructor.
1403		2726
1404	class myclass	2727	class myclass
1405	{	2728	{
1406	ev_io io; void io_cb (ev::io &w, int revents);	2729	ev::io io; void io_cb (ev::io &w, int revents);
1407	ev_idle idle void idle_cb (ev::idle &w, int revents);	2730	ev:idle idle void idle_cb (ev::idle &w, int revents);
1408		2731
1409	myclass ();	2732	myclass (int fd)
1410	}	2733	{
		2734	io .set <myclass, &myclass::io_cb > (this);
		2735	idle.set <myclass, &myclass::idle_cb> (this);
1411		2736
1412	myclass::myclass (int fd)
1413	: io (this, &myclass::io_cb),
1414	idle (this, &myclass::idle_cb)
1415	{
1416	io.start (fd, ev::READ);	2737	io.start (fd, ev::READ);
		2738	}
		2739	};
		2740
		2741
		2742	=head1 OTHER LANGUAGE BINDINGS
		2743
		2744	Libev does not offer other language bindings itself, but bindings for a
		2745	number of languages exist in the form of third-party packages. If you know
		2746	any interesting language binding in addition to the ones listed here, drop
		2747	me a note.
		2748
		2749	=over 4
		2750
		2751	=item Perl
		2752
		2753	The EV module implements the full libev API and is actually used to test
		2754	libev. EV is developed together with libev. Apart from the EV core module,
		2755	there are additional modules that implement libev-compatible interfaces
		2756	to C<libadns> (C<EV::ADNS>), C<Net::SNMP> (C<Net::SNMP::EV>) and the
		2757	C<libglib> event core (C<Glib::EV> and C<EV::Glib>).
		2758
		2759	It can be found and installed via CPAN, its homepage is at
		2760	L<http://software.schmorp.de/pkg/EV>.
		2761
		2762	=item Python
		2763
		2764	Python bindings can be found at L<http://code.google.com/p/pyev/>. It
		2765	seems to be quite complete and well-documented. Note, however, that the
		2766	patch they require for libev is outright dangerous as it breaks the ABI
		2767	for everybody else, and therefore, should never be applied in an installed
		2768	libev (if python requires an incompatible ABI then it needs to embed
		2769	libev).
		2770
		2771	=item Ruby
		2772
		2773	Tony Arcieri has written a ruby extension that offers access to a subset
		2774	of the libev API and adds file handle abstractions, asynchronous DNS and
		2775	more on top of it. It can be found via gem servers. Its homepage is at
		2776	L<http://rev.rubyforge.org/>.
		2777
		2778	=item D
		2779
		2780	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
		2781	be found at L<http://proj.llucax.com.ar/wiki/evd>.
		2782
		2783	=back
		2784
		2785
		2786	=head1 MACRO MAGIC
		2787
		2788	Libev can be compiled with a variety of options, the most fundamental
		2789	of which is C<EV_MULTIPLICITY>. This option determines whether (most)
		2790	functions and callbacks have an initial C<struct ev_loop *> argument.
		2791
		2792	To make it easier to write programs that cope with either variant, the
		2793	following macros are defined:
		2794
		2795	=over 4
		2796
		2797	=item C<EV_A>, C<EV_A_>
		2798
		2799	This provides the loop I<argument> for functions, if one is required ("ev
		2800	loop argument"). The C<EV_A> form is used when this is the sole argument,
		2801	C<EV_A_> is used when other arguments are following. Example:
		2802
		2803	ev_unref (EV_A);
		2804	ev_timer_add (EV_A_ watcher);
		2805	ev_loop (EV_A_ 0);
		2806
		2807	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
		2808	which is often provided by the following macro.
		2809
		2810	=item C<EV_P>, C<EV_P_>
		2811
		2812	This provides the loop I<parameter> for functions, if one is required ("ev
		2813	loop parameter"). The C<EV_P> form is used when this is the sole parameter,
		2814	C<EV_P_> is used when other parameters are following. Example:
		2815
		2816	// this is how ev_unref is being declared
		2817	static void ev_unref (EV_P);
		2818
		2819	// this is how you can declare your typical callback
		2820	static void cb (EV_P_ ev_timer *w, int revents)
		2821
		2822	It declares a parameter C<loop> of type C<struct ev_loop *>, quite
		2823	suitable for use with C<EV_A>.
		2824
		2825	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
		2826
		2827	Similar to the other two macros, this gives you the value of the default
		2828	loop, if multiple loops are supported ("ev loop default").
		2829
		2830	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
		2831
		2832	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
		2833	default loop has been initialised (C<UC> == unchecked). Their behaviour
		2834	is undefined when the default loop has not been initialised by a previous
		2835	execution of C<EV_DEFAULT>, C<EV_DEFAULT_> or C<ev_default_init (...)>.
		2836
		2837	It is often prudent to use C<EV_DEFAULT> when initialising the first
		2838	watcher in a function but use C<EV_DEFAULT_UC> afterwards.
		2839
		2840	=back
		2841
		2842	Example: Declare and initialise a check watcher, utilising the above
		2843	macros so it will work regardless of whether multiple loops are supported
		2844	or not.
		2845
		2846	static void
		2847	check_cb (EV_P_ ev_timer *w, int revents)
		2848	{
		2849	ev_check_stop (EV_A_ w);
1417	}	2850	}
		2851
		2852	ev_check check;
		2853	ev_check_init (&check, check_cb);
		2854	ev_check_start (EV_DEFAULT_ &check);
		2855	ev_loop (EV_DEFAULT_ 0);
1418		2856
1419	=head1 EMBEDDING	2857	=head1 EMBEDDING
1420		2858
1421	Libev can (and often is) directly embedded into host	2859	Libev can (and often is) directly embedded into host
1422	applications. Examples of applications that embed it include the Deliantra	2860	applications. Examples of applications that embed it include the Deliantra
1423	Game Server, the EV perl module, the GNU Virtual Private Ethernet (gvpe)	2861	Game Server, the EV perl module, the GNU Virtual Private Ethernet (gvpe)
1424	and rxvt-unicode.	2862	and rxvt-unicode.
1425		2863
1426	The goal is to enable you to just copy the neecssary files into your	2864	The goal is to enable you to just copy the necessary files into your
1427	source directory without having to change even a single line in them, so	2865	source directory without having to change even a single line in them, so
1428	you can easily upgrade by simply copying (or having a checked-out copy of	2866	you can easily upgrade by simply copying (or having a checked-out copy of
1429	libev somewhere in your source tree).	2867	libev somewhere in your source tree).
1430		2868
1431	=head2 FILESETS	2869	=head2 FILESETS
1432		2870
1433	Depending on what features you need you need to include one or more sets of files	2871	Depending on what features you need you need to include one or more sets of files
1434	in your app.	2872	in your application.
1435		2873
1436	=head3 CORE EVENT LOOP	2874	=head3 CORE EVENT LOOP
1437		2875
1438	To include only the libev core (all the C<ev_*> functions), with manual	2876	To include only the libev core (all the C<ev_*> functions), with manual
1439	configuration (no autoconf):	2877	configuration (no autoconf):
1440		2878
1441	#define EV_STANDALONE 1	2879	#define EV_STANDALONE 1
1442	#include "ev.c"	2880	#include "ev.c"
1443		2881
1444	This will automatically include F<ev.h>, too, and should be done in a	2882	This will automatically include F<ev.h>, too, and should be done in a
1445	single C source file only to provide the function implementations. To use	2883	single C source file only to provide the function implementations. To use
1446	it, do the same for F<ev.h> in all files wishing to use this API (best	2884	it, do the same for F<ev.h> in all files wishing to use this API (best
1447	done by writing a wrapper around F<ev.h> that you can include instead and	2885	done by writing a wrapper around F<ev.h> that you can include instead and
1448	where you can put other configuration options):	2886	where you can put other configuration options):
1449		2887
1450	#define EV_STANDALONE 1	2888	#define EV_STANDALONE 1
1451	#include "ev.h"	2889	#include "ev.h"
1452		2890
1453	Both header files and implementation files can be compiled with a C++	2891	Both header files and implementation files can be compiled with a C++
1454	compiler (at least, thats a stated goal, and breakage will be treated	2892	compiler (at least, thats a stated goal, and breakage will be treated
1455	as a bug).	2893	as a bug).
1456		2894
1457	You need the following files in your source tree, or in a directory	2895	You need the following files in your source tree, or in a directory
1458	in your include path (e.g. in libev/ when using -Ilibev):	2896	in your include path (e.g. in libev/ when using -Ilibev):
1459		2897
1460	ev.h	2898	ev.h
1461	ev.c	2899	ev.c
1462	ev_vars.h	2900	ev_vars.h
1463	ev_wrap.h	2901	ev_wrap.h
1464		2902
1465	ev_win32.c required on win32 platforms only	2903	ev_win32.c required on win32 platforms only
1466		2904
1467	ev_select.c only when select backend is enabled (which is is by default)	2905	ev_select.c only when select backend is enabled (which is enabled by default)
1468	ev_poll.c only when poll backend is enabled (disabled by default)	2906	ev_poll.c only when poll backend is enabled (disabled by default)
1469	ev_epoll.c only when the epoll backend is enabled (disabled by default)	2907	ev_epoll.c only when the epoll backend is enabled (disabled by default)
1470	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)	2908	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)
1471	ev_port.c only when the solaris port backend is enabled (disabled by default)	2909	ev_port.c only when the solaris port backend is enabled (disabled by default)
1472		2910
1473	F<ev.c> includes the backend files directly when enabled, so you only need	2911	F<ev.c> includes the backend files directly when enabled, so you only need
1474	to compile a single file.	2912	to compile this single file.
1475		2913
1476	=head3 LIBEVENT COMPATIBILITY API	2914	=head3 LIBEVENT COMPATIBILITY API
1477		2915
1478	To include the libevent compatibility API, also include:	2916	To include the libevent compatibility API, also include:
1479		2917
1480	#include "event.c"	2918	#include "event.c"
1481		2919
1482	in the file including F<ev.c>, and:	2920	in the file including F<ev.c>, and:
1483		2921
1484	#include "event.h"	2922	#include "event.h"
1485		2923
1486	in the files that want to use the libevent API. This also includes F<ev.h>.	2924	in the files that want to use the libevent API. This also includes F<ev.h>.
1487		2925
1488	You need the following additional files for this:	2926	You need the following additional files for this:
1489		2927
1490	event.h	2928	event.h
1491	event.c	2929	event.c
1492		2930
1493	=head3 AUTOCONF SUPPORT	2931	=head3 AUTOCONF SUPPORT
1494		2932
1495	Instead of using C<EV_STANDALONE=1> and providing your config in	2933	Instead of using C<EV_STANDALONE=1> and providing your configuration in
1496	whatever way you want, you can also C<m4_include([libev.m4])> in your	2934	whatever way you want, you can also C<m4_include([libev.m4])> in your
1497	F<configure.ac> and leave C<EV_STANDALONE> off. F<ev.c> will then include	2935	F<configure.ac> and leave C<EV_STANDALONE> undefined. F<ev.c> will then
1498	F<config.h> and configure itself accordingly.	2936	include F<config.h> and configure itself accordingly.
1499		2937
1500	For this of course you need the m4 file:	2938	For this of course you need the m4 file:
1501		2939
1502	libev.m4	2940	libev.m4
1503		2941
1504	=head2 PREPROCESSOR SYMBOLS/MACROS	2942	=head2 PREPROCESSOR SYMBOLS/MACROS
1505		2943
1506	Libev can be configured via a variety of preprocessor symbols you have to define	2944	Libev can be configured via a variety of preprocessor symbols you have to
1507	before including any of its files. The default is not to build for multiplicity	2945	define before including any of its files. The default in the absence of
1508	and only include the select backend.	2946	autoconf is noted for every option.
1509		2947
1510	=over 4	2948	=over 4
1511		2949
1512	=item EV_STANDALONE	2950	=item EV_STANDALONE
1513		2951
…		…
1518	F<event.h> that are not directly supported by the libev core alone.	2956	F<event.h> that are not directly supported by the libev core alone.
1519		2957
1520	=item EV_USE_MONOTONIC	2958	=item EV_USE_MONOTONIC
1521		2959
1522	If defined to be C<1>, libev will try to detect the availability of the	2960	If defined to be C<1>, libev will try to detect the availability of the
1523	monotonic clock option at both compiletime and runtime. Otherwise no use	2961	monotonic clock option at both compile time and runtime. Otherwise no use
1524	of the monotonic clock option will be attempted. If you enable this, you	2962	of the monotonic clock option will be attempted. If you enable this, you
1525	usually have to link against librt or something similar. Enabling it when	2963	usually have to link against librt or something similar. Enabling it when
1526	the functionality isn't available is safe, though, althoguh you have	2964	the functionality isn't available is safe, though, although you have
1527	to make sure you link against any libraries where the C<clock_gettime>	2965	to make sure you link against any libraries where the C<clock_gettime>
1528	function is hiding in (often F<-lrt>).	2966	function is hiding in (often F<-lrt>).
1529		2967
1530	=item EV_USE_REALTIME	2968	=item EV_USE_REALTIME
1531		2969
1532	If defined to be C<1>, libev will try to detect the availability of the	2970	If defined to be C<1>, libev will try to detect the availability of the
1533	realtime clock option at compiletime (and assume its availability at	2971	real-time clock option at compile time (and assume its availability at
1534	runtime if successful). Otherwise no use of the realtime clock option will	2972	runtime if successful). Otherwise no use of the real-time clock option will
1535	be attempted. This effectively replaces C<gettimeofday> by C<clock_get	2973	be attempted. This effectively replaces C<gettimeofday> by C<clock_get
1536	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See tzhe note about libraries	2974	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See the
1537	in the description of C<EV_USE_MONOTONIC>, though.	2975	note about libraries in the description of C<EV_USE_MONOTONIC>, though.
		2976
		2977	=item EV_USE_NANOSLEEP
		2978
		2979	If defined to be C<1>, libev will assume that C<nanosleep ()> is available
		2980	and will use it for delays. Otherwise it will use C<select ()>.
		2981
		2982	=item EV_USE_EVENTFD
		2983
		2984	If defined to be C<1>, then libev will assume that C<eventfd ()> is
		2985	available and will probe for kernel support at runtime. This will improve
		2986	C<ev_signal> and C<ev_async> performance and reduce resource consumption.
		2987	If undefined, it will be enabled if the headers indicate GNU/Linux + Glibc
		2988	2.7 or newer, otherwise disabled.
1538		2989
1539	=item EV_USE_SELECT	2990	=item EV_USE_SELECT
1540		2991
1541	If undefined or defined to be C<1>, libev will compile in support for the	2992	If undefined or defined to be C<1>, libev will compile in support for the
1542	C<select>(2) backend. No attempt at autodetection will be done: if no	2993	C<select>(2) backend. No attempt at auto-detection will be done: if no
1543	other method takes over, select will be it. Otherwise the select backend	2994	other method takes over, select will be it. Otherwise the select backend
1544	will not be compiled in.	2995	will not be compiled in.
1545		2996
1546	=item EV_SELECT_USE_FD_SET	2997	=item EV_SELECT_USE_FD_SET
1547		2998
1548	If defined to C<1>, then the select backend will use the system C<fd_set>	2999	If defined to C<1>, then the select backend will use the system C<fd_set>
1549	structure. This is useful if libev doesn't compile due to a missing	3000	structure. This is useful if libev doesn't compile due to a missing
1550	C<NFDBITS> or C<fd_mask> definition or it misguesses the bitset layout on	3001	C<NFDBITS> or C<fd_mask> definition or it mis-guesses the bitset layout on
1551	exotic systems. This usually limits the range of file descriptors to some	3002	exotic systems. This usually limits the range of file descriptors to some
1552	low limit such as 1024 or might have other limitations (winsocket only	3003	low limit such as 1024 or might have other limitations (winsocket only
1553	allows 64 sockets). The C<FD_SETSIZE> macro, set before compilation, might	3004	allows 64 sockets). The C<FD_SETSIZE> macro, set before compilation, might
1554	influence the size of the C<fd_set> used.	3005	influence the size of the C<fd_set> used.
1555		3006
…		…
1561	be used is the winsock select). This means that it will call	3012	be used is the winsock select). This means that it will call
1562	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	3013	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
1563	it is assumed that all these functions actually work on fds, even	3014	it is assumed that all these functions actually work on fds, even
1564	on win32. Should not be defined on non-win32 platforms.	3015	on win32. Should not be defined on non-win32 platforms.
1565		3016
		3017	=item EV_FD_TO_WIN32_HANDLE
		3018
		3019	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
		3020	file descriptors to socket handles. When not defining this symbol (the
		3021	default), then libev will call C<_get_osfhandle>, which is usually
		3022	correct. In some cases, programs use their own file descriptor management,
		3023	in which case they can provide this function to map fds to socket handles.
		3024
1566	=item EV_USE_POLL	3025	=item EV_USE_POLL
1567		3026
1568	If defined to be C<1>, libev will compile in support for the C<poll>(2)	3027	If defined to be C<1>, libev will compile in support for the C<poll>(2)
1569	backend. Otherwise it will be enabled on non-win32 platforms. It	3028	backend. Otherwise it will be enabled on non-win32 platforms. It
1570	takes precedence over select.	3029	takes precedence over select.
1571		3030
1572	=item EV_USE_EPOLL	3031	=item EV_USE_EPOLL
1573		3032
1574	If defined to be C<1>, libev will compile in support for the Linux	3033	If defined to be C<1>, libev will compile in support for the Linux
1575	C<epoll>(7) backend. Its availability will be detected at runtime,	3034	C<epoll>(7) backend. Its availability will be detected at runtime,
1576	otherwise another method will be used as fallback. This is the	3035	otherwise another method will be used as fallback. This is the preferred
1577	preferred backend for GNU/Linux systems.	3036	backend for GNU/Linux systems. If undefined, it will be enabled if the
		3037	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
1578		3038
1579	=item EV_USE_KQUEUE	3039	=item EV_USE_KQUEUE
1580		3040
1581	If defined to be C<1>, libev will compile in support for the BSD style	3041	If defined to be C<1>, libev will compile in support for the BSD style
1582	C<kqueue>(2) backend. Its actual availability will be detected at runtime,	3042	C<kqueue>(2) backend. Its actual availability will be detected at runtime,
…		…
1595	otherwise another method will be used as fallback. This is the preferred	3055	otherwise another method will be used as fallback. This is the preferred
1596	backend for Solaris 10 systems.	3056	backend for Solaris 10 systems.
1597		3057
1598	=item EV_USE_DEVPOLL	3058	=item EV_USE_DEVPOLL
1599		3059
1600	reserved for future expansion, works like the USE symbols above.	3060	Reserved for future expansion, works like the USE symbols above.
		3061
		3062	=item EV_USE_INOTIFY
		3063
		3064	If defined to be C<1>, libev will compile in support for the Linux inotify
		3065	interface to speed up C<ev_stat> watchers. Its actual availability will
		3066	be detected at runtime. If undefined, it will be enabled if the headers
		3067	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
		3068
		3069	=item EV_ATOMIC_T
		3070
		3071	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
		3072	access is atomic with respect to other threads or signal contexts. No such
		3073	type is easily found in the C language, so you can provide your own type
		3074	that you know is safe for your purposes. It is used both for signal handler "locking"
		3075	as well as for signal and thread safety in C<ev_async> watchers.
		3076
		3077	In the absence of this define, libev will use C<sig_atomic_t volatile>
		3078	(from F<signal.h>), which is usually good enough on most platforms.
1601		3079
1602	=item EV_H	3080	=item EV_H
1603		3081
1604	The name of the F<ev.h> header file used to include it. The default if	3082	The name of the F<ev.h> header file used to include it. The default if
1605	undefined is C<< <ev.h> >> in F<event.h> and C<"ev.h"> in F<ev.c>. This	3083	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
1606	can be used to virtually rename the F<ev.h> header file in case of conflicts.	3084	used to virtually rename the F<ev.h> header file in case of conflicts.
1607		3085
1608	=item EV_CONFIG_H	3086	=item EV_CONFIG_H
1609		3087
1610	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	3088	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
1611	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	3089	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
1612	C<EV_H>, above.	3090	C<EV_H>, above.
1613		3091
1614	=item EV_EVENT_H	3092	=item EV_EVENT_H
1615		3093
1616	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	3094	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
1617	of how the F<event.h> header can be found.	3095	of how the F<event.h> header can be found, the default is C<"event.h">.
1618		3096
1619	=item EV_PROTOTYPES	3097	=item EV_PROTOTYPES
1620		3098
1621	If defined to be C<0>, then F<ev.h> will not define any function	3099	If defined to be C<0>, then F<ev.h> will not define any function
1622	prototypes, but still define all the structs and other symbols. This is	3100	prototypes, but still define all the structs and other symbols. This is
…		…
1629	will have the C<struct ev_loop *> as first argument, and you can create	3107	will have the C<struct ev_loop *> as first argument, and you can create
1630	additional independent event loops. Otherwise there will be no support	3108	additional independent event loops. Otherwise there will be no support
1631	for multiple event loops and there is no first event loop pointer	3109	for multiple event loops and there is no first event loop pointer
1632	argument. Instead, all functions act on the single default loop.	3110	argument. Instead, all functions act on the single default loop.
1633		3111
		3112	=item EV_MINPRI
		3113
		3114	=item EV_MAXPRI
		3115
		3116	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to
		3117	C<EV_MAXPRI>, but otherwise there are no non-obvious limitations. You can
		3118	provide for more priorities by overriding those symbols (usually defined
		3119	to be C<-2> and C<2>, respectively).
		3120
		3121	When doing priority-based operations, libev usually has to linearly search
		3122	all the priorities, so having many of them (hundreds) uses a lot of space
		3123	and time, so using the defaults of five priorities (-2 .. +2) is usually
		3124	fine.
		3125
		3126	If your embedding application does not need any priorities, defining these both to
		3127	C<0> will save some memory and CPU.
		3128
1634	=item EV_PERIODICS	3129	=item EV_PERIODIC_ENABLE
1635		3130
1636	If undefined or defined to be C<1>, then periodic timers are supported,	3131	If undefined or defined to be C<1>, then periodic timers are supported. If
1637	otherwise not. This saves a few kb of code.	3132	defined to be C<0>, then they are not. Disabling them saves a few kB of
		3133	code.
		3134
		3135	=item EV_IDLE_ENABLE
		3136
		3137	If undefined or defined to be C<1>, then idle watchers are supported. If
		3138	defined to be C<0>, then they are not. Disabling them saves a few kB of
		3139	code.
		3140
		3141	=item EV_EMBED_ENABLE
		3142
		3143	If undefined or defined to be C<1>, then embed watchers are supported. If
		3144	defined to be C<0>, then they are not.
		3145
		3146	=item EV_STAT_ENABLE
		3147
		3148	If undefined or defined to be C<1>, then stat watchers are supported. If
		3149	defined to be C<0>, then they are not.
		3150
		3151	=item EV_FORK_ENABLE
		3152
		3153	If undefined or defined to be C<1>, then fork watchers are supported. If
		3154	defined to be C<0>, then they are not.
		3155
		3156	=item EV_ASYNC_ENABLE
		3157
		3158	If undefined or defined to be C<1>, then async watchers are supported. If
		3159	defined to be C<0>, then they are not.
		3160
		3161	=item EV_MINIMAL
		3162
		3163	If you need to shave off some kilobytes of code at the expense of some
		3164	speed, define this symbol to C<1>. Currently this is used to override some
		3165	inlining decisions, saves roughly 30% code size on amd64. It also selects a
		3166	much smaller 2-heap for timer management over the default 4-heap.
		3167
		3168	=item EV_PID_HASHSIZE
		3169
		3170	C<ev_child> watchers use a small hash table to distribute workload by
		3171	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more
		3172	than enough. If you need to manage thousands of children you might want to
		3173	increase this value (I<must> be a power of two).
		3174
		3175	=item EV_INOTIFY_HASHSIZE
		3176
		3177	C<ev_stat> watchers use a small hash table to distribute workload by
		3178	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),
		3179	usually more than enough. If you need to manage thousands of C<ev_stat>
		3180	watchers you might want to increase this value (I<must> be a power of
		3181	two).
		3182
		3183	=item EV_USE_4HEAP
		3184
		3185	Heaps are not very cache-efficient. To improve the cache-efficiency of the
		3186	timer and periodics heap, libev uses a 4-heap when this symbol is defined
		3187	to C<1>. The 4-heap uses more complicated (longer) code but has
		3188	noticeably faster performance with many (thousands) of watchers.
		3189
		3190	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>
		3191	(disabled).
		3192
		3193	=item EV_HEAP_CACHE_AT
		3194
		3195	Heaps are not very cache-efficient. To improve the cache-efficiency of the
		3196	timer and periodics heap, libev can cache the timestamp (I<at>) within
		3197	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
		3198	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
		3199	but avoids random read accesses on heap changes. This improves performance
		3200	noticeably with with many (hundreds) of watchers.
		3201
		3202	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>
		3203	(disabled).
		3204
		3205	=item EV_VERIFY
		3206
		3207	Controls how much internal verification (see C<ev_loop_verify ()>) will
		3208	be done: If set to C<0>, no internal verification code will be compiled
		3209	in. If set to C<1>, then verification code will be compiled in, but not
		3210	called. If set to C<2>, then the internal verification code will be
		3211	called once per loop, which can slow down libev. If set to C<3>, then the
		3212	verification code will be called very frequently, which will slow down
		3213	libev considerably.
		3214
		3215	The default is C<1>, unless C<EV_MINIMAL> is set, in which case it will be
		3216	C<0.>
1638		3217
1639	=item EV_COMMON	3218	=item EV_COMMON
1640		3219
1641	By default, all watchers have a C<void *data> member. By redefining	3220	By default, all watchers have a C<void *data> member. By redefining
1642	this macro to a something else you can include more and other types of	3221	this macro to a something else you can include more and other types of
1643	members. You have to define it each time you include one of the files,	3222	members. You have to define it each time you include one of the files,
1644	though, and it must be identical each time.	3223	though, and it must be identical each time.
1645		3224
1646	For example, the perl EV module uses something like this:	3225	For example, the perl EV module uses something like this:
1647		3226
1648	#define EV_COMMON \	3227	#define EV_COMMON \
1649	SV *self; /* contains this struct */ \	3228	SV *self; /* contains this struct */ \
1650	SV *cb_sv, *fh /* note no trailing ";" */	3229	SV *cb_sv, *fh /* note no trailing ";" */
1651		3230
1652	=item EV_CB_DECLARE(type)	3231	=item EV_CB_DECLARE (type)
1653		3232
1654	=item EV_CB_INVOKE(watcher,revents)	3233	=item EV_CB_INVOKE (watcher, revents)
1655		3234
1656	=item ev_set_cb(ev,cb)	3235	=item ev_set_cb (ev, cb)
1657		3236
1658	Can be used to change the callback member declaration in each watcher,	3237	Can be used to change the callback member declaration in each watcher,
1659	and the way callbacks are invoked and set. Must expand to a struct member	3238	and the way callbacks are invoked and set. Must expand to a struct member
1660	definition and a statement, respectively. See the F<ev.v> header file for	3239	definition and a statement, respectively. See the F<ev.h> header file for
1661	their default definitions. One possible use for overriding these is to	3240	their default definitions. One possible use for overriding these is to
1662	avoid the ev_loop pointer as first argument in all cases, or to use method	3241	avoid the C<struct ev_loop *> as first argument in all cases, or to use
1663	calls instead of plain function calls in C++.	3242	method calls instead of plain function calls in C++.
		3243
		3244	=head2 EXPORTED API SYMBOLS
		3245
		3246	If you need to re-export the API (e.g. via a DLL) and you need a list of
		3247	exported symbols, you can use the provided F<Symbol.*> files which list
		3248	all public symbols, one per line:
		3249
		3250	Symbols.ev for libev proper
		3251	Symbols.event for the libevent emulation
		3252
		3253	This can also be used to rename all public symbols to avoid clashes with
		3254	multiple versions of libev linked together (which is obviously bad in
		3255	itself, but sometimes it is inconvenient to avoid this).
		3256
		3257	A sed command like this will create wrapper C<#define>'s that you need to
		3258	include before including F<ev.h>:
		3259
		3260	<Symbols.ev sed -e "s/.*/#define & myprefix_&/" >wrap.h
		3261
		3262	This would create a file F<wrap.h> which essentially looks like this:
		3263
		3264	#define ev_backend myprefix_ev_backend
		3265	#define ev_check_start myprefix_ev_check_start
		3266	#define ev_check_stop myprefix_ev_check_stop
		3267	...
1664		3268
1665	=head2 EXAMPLES	3269	=head2 EXAMPLES
1666		3270
1667	For a real-world example of a program the includes libev	3271	For a real-world example of a program the includes libev
1668	verbatim, you can have a look at the EV perl module	3272	verbatim, you can have a look at the EV perl module
…		…
1671	interface) and F<EV.xs> (implementation) files. Only the F<EV.xs> file	3275	interface) and F<EV.xs> (implementation) files. Only the F<EV.xs> file
1672	will be compiled. It is pretty complex because it provides its own header	3276	will be compiled. It is pretty complex because it provides its own header
1673	file.	3277	file.
1674		3278
1675	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	3279	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
1676	that everybody includes and which overrides some autoconf choices:	3280	that everybody includes and which overrides some configure choices:
1677		3281
		3282	#define EV_MINIMAL 1
1678	#define EV_USE_POLL 0	3283	#define EV_USE_POLL 0
1679	#define EV_MULTIPLICITY 0	3284	#define EV_MULTIPLICITY 0
1680	#define EV_PERIODICS 0	3285	#define EV_PERIODIC_ENABLE 0
		3286	#define EV_STAT_ENABLE 0
		3287	#define EV_FORK_ENABLE 0
1681	#define EV_CONFIG_H <config.h>	3288	#define EV_CONFIG_H <config.h>
		3289	#define EV_MINPRI 0
		3290	#define EV_MAXPRI 0
1682		3291
1683	#include "ev++.h"	3292	#include "ev++.h"
1684		3293
1685	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	3294	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
1686		3295
1687	#include "ev_cpp.h"	3296	#include "ev_cpp.h"
1688	#include "ev.c"	3297	#include "ev.c"
		3298
		3299
		3300	=head1 THREADS AND COROUTINES
		3301
		3302	=head2 THREADS
		3303
		3304	Libev itself is thread-safe (unless the opposite is specifically
		3305	documented for a function), but it uses no locking itself. This means that
		3306	you can use as many loops as you want in parallel, as long as only one
		3307	thread ever calls into one libev function with the same loop parameter:
		3308	libev guarentees that different event loops share no data structures that
		3309	need locking.
		3310
		3311	Or to put it differently: calls with different loop parameters can be done
		3312	concurrently from multiple threads, calls with the same loop parameter
		3313	must be done serially (but can be done from different threads, as long as
		3314	only one thread ever is inside a call at any point in time, e.g. by using
		3315	a mutex per loop).
		3316
		3317	Specifically to support threads (and signal handlers), libev implements
		3318	so-called C<ev_async> watchers, which allow some limited form of
		3319	concurrency on the same event loop.
		3320
		3321	If you want to know which design (one loop, locking, or multiple loops
		3322	without or something else still) is best for your problem, then I cannot
		3323	help you. I can give some generic advice however:
		3324
		3325	=over 4
		3326
		3327	=item * most applications have a main thread: use the default libev loop
		3328	in that thread, or create a separate thread running only the default loop.
		3329
		3330	This helps integrating other libraries or software modules that use libev
		3331	themselves and don't care/know about threading.
		3332
		3333	=item * one loop per thread is usually a good model.
		3334
		3335	Doing this is almost never wrong, sometimes a better-performance model
		3336	exists, but it is always a good start.
		3337
		3338	=item * other models exist, such as the leader/follower pattern, where one
		3339	loop is handed through multiple threads in a kind of round-robin fashion.
		3340
		3341	Choosing a model is hard - look around, learn, know that usually you can do
		3342	better than you currently do :-)
		3343
		3344	=item * often you need to talk to some other thread which blocks in the
		3345	event loop.
		3346
		3347	C<ev_async> watchers can be used to wake them up from other threads safely
		3348	(or from signal contexts...).
		3349
		3350	An example use would be to communicate signals or other events that only
		3351	work in the default loop by registering the signal watcher with the
		3352	default loop and triggering an C<ev_async> watcher from the default loop
		3353	watcher callback into the event loop interested in the signal.
		3354
		3355	=back
		3356
		3357	=head2 COROUTINES
		3358
		3359	Libev is much more accommodating to coroutines ("cooperative threads"):
		3360	libev fully supports nesting calls to it's functions from different
		3361	coroutines (e.g. you can call C<ev_loop> on the same loop from two
		3362	different coroutines and switch freely between both coroutines running the
		3363	loop, as long as you don't confuse yourself). The only exception is that
		3364	you must not do this from C<ev_periodic> reschedule callbacks.
		3365
		3366	Care has been taken to ensure that libev does not keep local state inside
		3367	C<ev_loop>, and other calls do not usually allow coroutine switches.
		3368
		3369
		3370	=head1 COMPLEXITIES
		3371
		3372	In this section the complexities of (many of) the algorithms used inside
		3373	libev will be explained. For complexity discussions about backends see the
		3374	documentation for C<ev_default_init>.
		3375
		3376	All of the following are about amortised time: If an array needs to be
		3377	extended, libev needs to realloc and move the whole array, but this
		3378	happens asymptotically never with higher number of elements, so O(1) might
		3379	mean it might do a lengthy realloc operation in rare cases, but on average
		3380	it is much faster and asymptotically approaches constant time.
		3381
		3382	=over 4
		3383
		3384	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)
		3385
		3386	This means that, when you have a watcher that triggers in one hour and
		3387	there are 100 watchers that would trigger before that then inserting will
		3388	have to skip roughly seven (C<ld 100>) of these watchers.
		3389
		3390	=item Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)
		3391
		3392	That means that changing a timer costs less than removing/adding them
		3393	as only the relative motion in the event queue has to be paid for.
		3394
		3395	=item Starting io/check/prepare/idle/signal/child/fork/async watchers: O(1)
		3396
		3397	These just add the watcher into an array or at the head of a list.
		3398
		3399	=item Stopping check/prepare/idle/fork/async watchers: O(1)
		3400
		3401	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
		3402
		3403	These watchers are stored in lists then need to be walked to find the
		3404	correct watcher to remove. The lists are usually short (you don't usually
		3405	have many watchers waiting for the same fd or signal).
		3406
		3407	=item Finding the next timer in each loop iteration: O(1)
		3408
		3409	By virtue of using a binary or 4-heap, the next timer is always found at a
		3410	fixed position in the storage array.
		3411
		3412	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
		3413
		3414	A change means an I/O watcher gets started or stopped, which requires
		3415	libev to recalculate its status (and possibly tell the kernel, depending
		3416	on backend and whether C<ev_io_set> was used).
		3417
		3418	=item Activating one watcher (putting it into the pending state): O(1)
		3419
		3420	=item Priority handling: O(number_of_priorities)
		3421
		3422	Priorities are implemented by allocating some space for each
		3423	priority. When doing priority-based operations, libev usually has to
		3424	linearly search all the priorities, but starting/stopping and activating
		3425	watchers becomes O(1) w.r.t. priority handling.
		3426
		3427	=item Sending an ev_async: O(1)
		3428
		3429	=item Processing ev_async_send: O(number_of_async_watchers)
		3430
		3431	=item Processing signals: O(max_signal_number)
		3432
		3433	Sending involves a system call I<iff> there were no other C<ev_async_send>
		3434	calls in the current loop iteration. Checking for async and signal events
		3435	involves iterating over all running async watchers or all signal numbers.
		3436
		3437	=back
		3438
		3439
		3440	=head1 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
		3441
		3442	Win32 doesn't support any of the standards (e.g. POSIX) that libev
		3443	requires, and its I/O model is fundamentally incompatible with the POSIX
		3444	model. Libev still offers limited functionality on this platform in
		3445	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
		3446	descriptors. This only applies when using Win32 natively, not when using
		3447	e.g. cygwin.
		3448
		3449	Lifting these limitations would basically require the full
		3450	re-implementation of the I/O system. If you are into these kinds of
		3451	things, then note that glib does exactly that for you in a very portable
		3452	way (note also that glib is the slowest event library known to man).
		3453
		3454	There is no supported compilation method available on windows except
		3455	embedding it into other applications.
		3456
		3457	Not a libev limitation but worth mentioning: windows apparently doesn't
		3458	accept large writes: instead of resulting in a partial write, windows will
		3459	either accept everything or return C<ENOBUFS> if the buffer is too large,
		3460	so make sure you only write small amounts into your sockets (less than a
		3461	megabyte seems safe, but thsi apparently depends on the amount of memory
		3462	available).
		3463
		3464	Due to the many, low, and arbitrary limits on the win32 platform and
		3465	the abysmal performance of winsockets, using a large number of sockets
		3466	is not recommended (and not reasonable). If your program needs to use
		3467	more than a hundred or so sockets, then likely it needs to use a totally
		3468	different implementation for windows, as libev offers the POSIX readiness
		3469	notification model, which cannot be implemented efficiently on windows
		3470	(Microsoft monopoly games).
		3471
		3472	A typical way to use libev under windows is to embed it (see the embedding
		3473	section for details) and use the following F<evwrap.h> header file instead
		3474	of F<ev.h>:
		3475
		3476	#define EV_STANDALONE /* keeps ev from requiring config.h */
		3477	#define EV_SELECT_IS_WINSOCKET 1 /* configure libev for windows select */
		3478
		3479	#include "ev.h"
		3480
		3481	And compile the following F<evwrap.c> file into your project (make sure
		3482	you do I<not> compile the F<ev.c> or any other embedded soruce files!):
		3483
		3484	#include "evwrap.h"
		3485	#include "ev.c"
		3486
		3487	=over 4
		3488
		3489	=item The winsocket select function
		3490
		3491	The winsocket C<select> function doesn't follow POSIX in that it
		3492	requires socket I<handles> and not socket I<file descriptors> (it is
		3493	also extremely buggy). This makes select very inefficient, and also
		3494	requires a mapping from file descriptors to socket handles (the Microsoft
		3495	C runtime provides the function C<_open_osfhandle> for this). See the
		3496	discussion of the C<EV_SELECT_USE_FD_SET>, C<EV_SELECT_IS_WINSOCKET> and
		3497	C<EV_FD_TO_WIN32_HANDLE> preprocessor symbols for more info.
		3498
		3499	The configuration for a "naked" win32 using the Microsoft runtime
		3500	libraries and raw winsocket select is:
		3501
		3502	#define EV_USE_SELECT 1
		3503	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
		3504
		3505	Note that winsockets handling of fd sets is O(n), so you can easily get a
		3506	complexity in the O(n²) range when using win32.
		3507
		3508	=item Limited number of file descriptors
		3509
		3510	Windows has numerous arbitrary (and low) limits on things.
		3511
		3512	Early versions of winsocket's select only supported waiting for a maximum
		3513	of C<64> handles (probably owning to the fact that all windows kernels
		3514	can only wait for C<64> things at the same time internally; Microsoft
		3515	recommends spawning a chain of threads and wait for 63 handles and the
		3516	previous thread in each. Great).
		3517
		3518	Newer versions support more handles, but you need to define C<FD_SETSIZE>
		3519	to some high number (e.g. C<2048>) before compiling the winsocket select
		3520	call (which might be in libev or elsewhere, for example, perl does its own
		3521	select emulation on windows).
		3522
		3523	Another limit is the number of file descriptors in the Microsoft runtime
		3524	libraries, which by default is C<64> (there must be a hidden I<64> fetish
		3525	or something like this inside Microsoft). You can increase this by calling
		3526	C<_setmaxstdio>, which can increase this limit to C<2048> (another
		3527	arbitrary limit), but is broken in many versions of the Microsoft runtime
		3528	libraries.
		3529
		3530	This might get you to about C<512> or C<2048> sockets (depending on
		3531	windows version and/or the phase of the moon). To get more, you need to
		3532	wrap all I/O functions and provide your own fd management, but the cost of
		3533	calling select (O(n²)) will likely make this unworkable.
		3534
		3535	=back
		3536
		3537
		3538	=head1 PORTABILITY REQUIREMENTS
		3539
		3540	In addition to a working ISO-C implementation, libev relies on a few
		3541	additional extensions:
		3542
		3543	=over 4
		3544
		3545	=item C<void (*)(ev_watcher_type *, int revents)> must have compatible
		3546	calling conventions regardless of C<ev_watcher_type *>.
		3547
		3548	Libev assumes not only that all watcher pointers have the same internal
		3549	structure (guaranteed by POSIX but not by ISO C for example), but it also
		3550	assumes that the same (machine) code can be used to call any watcher
		3551	callback: The watcher callbacks have different type signatures, but libev
		3552	calls them using an C<ev_watcher *> internally.
		3553
		3554	=item C<sig_atomic_t volatile> must be thread-atomic as well
		3555
		3556	The type C<sig_atomic_t volatile> (or whatever is defined as
		3557	C<EV_ATOMIC_T>) must be atomic w.r.t. accesses from different
		3558	threads. This is not part of the specification for C<sig_atomic_t>, but is
		3559	believed to be sufficiently portable.
		3560
		3561	=item C<sigprocmask> must work in a threaded environment
		3562
		3563	Libev uses C<sigprocmask> to temporarily block signals. This is not
		3564	allowed in a threaded program (C<pthread_sigmask> has to be used). Typical
		3565	pthread implementations will either allow C<sigprocmask> in the "main
		3566	thread" or will block signals process-wide, both behaviours would
		3567	be compatible with libev. Interaction between C<sigprocmask> and
		3568	C<pthread_sigmask> could complicate things, however.
		3569
		3570	The most portable way to handle signals is to block signals in all threads
		3571	except the initial one, and run the default loop in the initial thread as
		3572	well.
		3573
		3574	=item C<long> must be large enough for common memory allocation sizes
		3575
		3576	To improve portability and simplify using libev, libev uses C<long>
		3577	internally instead of C<size_t> when allocating its data structures. On
		3578	non-POSIX systems (Microsoft...) this might be unexpectedly low, but
		3579	is still at least 31 bits everywhere, which is enough for hundreds of
		3580	millions of watchers.
		3581
		3582	=item C<double> must hold a time value in seconds with enough accuracy
		3583
		3584	The type C<double> is used to represent timestamps. It is required to
		3585	have at least 51 bits of mantissa (and 9 bits of exponent), which is good
		3586	enough for at least into the year 4000. This requirement is fulfilled by
		3587	implementations implementing IEEE 754 (basically all existing ones).
		3588
		3589	=back
		3590
		3591	If you know of other additional requirements drop me a note.
		3592
		3593
		3594	=head1 COMPILER WARNINGS
		3595
		3596	Depending on your compiler and compiler settings, you might get no or a
		3597	lot of warnings when compiling libev code. Some people are apparently
		3598	scared by this.
		3599
		3600	However, these are unavoidable for many reasons. For one, each compiler
		3601	has different warnings, and each user has different tastes regarding
		3602	warning options. "Warn-free" code therefore cannot be a goal except when
		3603	targeting a specific compiler and compiler-version.
		3604
		3605	Another reason is that some compiler warnings require elaborate
		3606	workarounds, or other changes to the code that make it less clear and less
		3607	maintainable.
		3608
		3609	And of course, some compiler warnings are just plain stupid, or simply
		3610	wrong (because they don't actually warn about the condition their message
		3611	seems to warn about).
		3612
		3613	While libev is written to generate as few warnings as possible,
		3614	"warn-free" code is not a goal, and it is recommended not to build libev
		3615	with any compiler warnings enabled unless you are prepared to cope with
		3616	them (e.g. by ignoring them). Remember that warnings are just that:
		3617	warnings, not errors, or proof of bugs.
		3618
		3619
		3620	=head1 VALGRIND
		3621
		3622	Valgrind has a special section here because it is a popular tool that is
		3623	highly useful, but valgrind reports are very hard to interpret.
		3624
		3625	If you think you found a bug (memory leak, uninitialised data access etc.)
		3626	in libev, then check twice: If valgrind reports something like:
		3627
		3628	==2274== definitely lost: 0 bytes in 0 blocks.
		3629	==2274== possibly lost: 0 bytes in 0 blocks.
		3630	==2274== still reachable: 256 bytes in 1 blocks.
		3631
		3632	Then there is no memory leak. Similarly, under some circumstances,
		3633	valgrind might report kernel bugs as if it were a bug in libev, or it
		3634	might be confused (it is a very good tool, but only a tool).
		3635
		3636	If you are unsure about something, feel free to contact the mailing list
		3637	with the full valgrind report and an explanation on why you think this is
		3638	a bug in libev. However, don't be annoyed when you get a brisk "this is
		3639	no bug" answer and take the chance of learning how to interpret valgrind
		3640	properly.
		3641
		3642	If you need, for some reason, empty reports from valgrind for your project
		3643	I suggest using suppression lists.
		3644
1689		3645
1690	=head1 AUTHOR	3646	=head1 AUTHOR
1691		3647
1692	Marc Lehmann <libev@schmorp.de>.	3648	Marc Lehmann <libev@schmorp.de>.
1693		3649

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines