ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.202 by root, Fri Oct 24 08:30:01 2008 UTC vs.
Revision 1.454 by root, Tue Jun 25 05:17:50 2019 UTC

		1	=encoding utf-8
		2
1	=head1 NAME	3	=head1 NAME
2		4
3	libev - a high performance full-featured event loop written in C	5	libev - a high performance full-featured event loop written in C
4		6
5	=head1 SYNOPSIS	7	=head1 SYNOPSIS
…		…
8		10
9	=head2 EXAMPLE PROGRAM	11	=head2 EXAMPLE PROGRAM
10		12
11	// a single header file is required	13	// a single header file is required
12	#include <ev.h>	14	#include <ev.h>
		15
		16	#include <stdio.h> // for puts
13		17
14	// every watcher type has its own typedef'd struct	18	// every watcher type has its own typedef'd struct
15	// with the name ev_TYPE	19	// with the name ev_TYPE
16	ev_io stdin_watcher;	20	ev_io stdin_watcher;
17	ev_timer timeout_watcher;	21	ev_timer timeout_watcher;
…		…
24	puts ("stdin ready");	28	puts ("stdin ready");
25	// for one-shot events, one must manually stop the watcher	29	// for one-shot events, one must manually stop the watcher
26	// with its corresponding stop function.	30	// with its corresponding stop function.
27	ev_io_stop (EV_A_ w);	31	ev_io_stop (EV_A_ w);
28		32
29	// this causes all nested ev_loop's to stop iterating	33	// this causes all nested ev_run's to stop iterating
30	ev_unloop (EV_A_ EVUNLOOP_ALL);	34	ev_break (EV_A_ EVBREAK_ALL);
31	}	35	}
32		36
33	// another callback, this time for a time-out	37	// another callback, this time for a time-out
34	static void	38	static void
35	timeout_cb (EV_P_ ev_timer *w, int revents)	39	timeout_cb (EV_P_ ev_timer *w, int revents)
36	{	40	{
37	puts ("timeout");	41	puts ("timeout");
38	// this causes the innermost ev_loop to stop iterating	42	// this causes the innermost ev_run to stop iterating
39	ev_unloop (EV_A_ EVUNLOOP_ONE);	43	ev_break (EV_A_ EVBREAK_ONE);
40	}	44	}
41		45
42	int	46	int
43	main (void)	47	main (void)
44	{	48	{
45	// use the default event loop unless you have special needs	49	// use the default event loop unless you have special needs
46	ev_loop *loop = ev_default_loop (0);	50	struct ev_loop *loop = EV_DEFAULT;
47		51
48	// initialise an io watcher, then start it	52	// initialise an io watcher, then start it
49	// this one will watch for stdin to become readable	53	// this one will watch for stdin to become readable
50	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	54	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
51	ev_io_start (loop, &stdin_watcher);	55	ev_io_start (loop, &stdin_watcher);
…		…
54	// simple non-repeating 5.5 second timeout	58	// simple non-repeating 5.5 second timeout
55	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	59	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
56	ev_timer_start (loop, &timeout_watcher);	60	ev_timer_start (loop, &timeout_watcher);
57		61
58	// now wait for events to arrive	62	// now wait for events to arrive
59	ev_loop (loop, 0);	63	ev_run (loop, 0);
60		64
61	// unloop was called, so exit	65	// break was called, so exit
62	return 0;	66	return 0;
63	}	67	}
64		68
65	=head1 DESCRIPTION	69	=head1 ABOUT THIS DOCUMENT
		70
		71	This document documents the libev software package.
66		72
67	The newest version of this document is also available as an html-formatted	73	The newest version of this document is also available as an html-formatted
68	web page you might find easier to navigate when reading it for the first	74	web page you might find easier to navigate when reading it for the first
69	time: L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.	75	time: L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.
		76
		77	While this document tries to be as complete as possible in documenting
		78	libev, its usage and the rationale behind its design, it is not a tutorial
		79	on event-based programming, nor will it introduce event-based programming
		80	with libev.
		81
		82	Familiarity with event based programming techniques in general is assumed
		83	throughout this document.
		84
		85	=head1 WHAT TO READ WHEN IN A HURRY
		86
		87	This manual tries to be very detailed, but unfortunately, this also makes
		88	it very long. If you just want to know the basics of libev, I suggest
		89	reading L</ANATOMY OF A WATCHER>, then the L</EXAMPLE PROGRAM> above and
		90	look up the missing functions in L</GLOBAL FUNCTIONS> and the C<ev_io> and
		91	C<ev_timer> sections in L</WATCHER TYPES>.
		92
		93	=head1 ABOUT LIBEV
70		94
71	Libev is an event loop: you register interest in certain events (such as a	95	Libev is an event loop: you register interest in certain events (such as a
72	file descriptor being readable or a timeout occurring), and it will manage	96	file descriptor being readable or a timeout occurring), and it will manage
73	these event sources and provide your program with events.	97	these event sources and provide your program with events.
74		98
…		…
81	details of the event, and then hand it over to libev by I<starting> the	105	details of the event, and then hand it over to libev by I<starting> the
82	watcher.	106	watcher.
83		107
84	=head2 FEATURES	108	=head2 FEATURES
85		109
86	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	110	Libev supports C<select>, C<poll>, the Linux-specific aio and C<epoll>
87	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	111	interfaces, the BSD-specific C<kqueue> and the Solaris-specific event port
88	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	112	mechanisms for file descriptor events (C<ev_io>), the Linux C<inotify>
89	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers	113	interface (for C<ev_stat>), Linux eventfd/signalfd (for faster and cleaner
90	with customised rescheduling (C<ev_periodic>), synchronous signals	114	inter-thread wakeup (C<ev_async>)/signal handling (C<ev_signal>)) relative
91	(C<ev_signal>), process status change events (C<ev_child>), and event	115	timers (C<ev_timer>), absolute timers with customised rescheduling
92	watchers dealing with the event loop mechanism itself (C<ev_idle>,	116	(C<ev_periodic>), synchronous signals (C<ev_signal>), process status
93	C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as	117	change events (C<ev_child>), and event watchers dealing with the event
94	file watchers (C<ev_stat>) and even limited support for fork events	118	loop mechanism itself (C<ev_idle>, C<ev_embed>, C<ev_prepare> and
95	(C<ev_fork>).	119	C<ev_check> watchers) as well as file watchers (C<ev_stat>) and even
		120	limited support for fork events (C<ev_fork>).
96		121
97	It also is quite fast (see this	122	It also is quite fast (see this
98	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent	123	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
99	for example).	124	for example).
100		125
…		…
103	Libev is very configurable. In this manual the default (and most common)	128	Libev is very configurable. In this manual the default (and most common)
104	configuration will be described, which supports multiple event loops. For	129	configuration will be described, which supports multiple event loops. For
105	more info about various configuration options please have a look at	130	more info about various configuration options please have a look at
106	B<EMBED> section in this manual. If libev was configured without support	131	B<EMBED> section in this manual. If libev was configured without support
107	for multiple event loops, then all functions taking an initial argument of	132	for multiple event loops, then all functions taking an initial argument of
108	name C<loop> (which is always of type C<ev_loop *>) will not have	133	name C<loop> (which is always of type C<struct ev_loop *>) will not have
109	this argument.	134	this argument.
110		135
111	=head2 TIME REPRESENTATION	136	=head2 TIME REPRESENTATION
112		137
113	Libev represents time as a single floating point number, representing the	138	Libev represents time as a single floating point number, representing
114	(fractional) number of seconds since the (POSIX) epoch (somewhere near	139	the (fractional) number of seconds since the (POSIX) epoch (in practice
115	the beginning of 1970, details are complicated, don't ask). This type is	140	somewhere near the beginning of 1970, details are complicated, don't
116	called C<ev_tstamp>, which is what you should use too. It usually aliases	141	ask). This type is called C<ev_tstamp>, which is what you should use
117	to the C<double> type in C, and when you need to do any calculations on	142	too. It usually aliases to the C<double> type in C. When you need to do
118	it, you should treat it as some floating point value. Unlike the name	143	any calculations on it, you should treat it as some floating point value.
		144
119	component C<stamp> might indicate, it is also used for time differences	145	Unlike the name component C<stamp> might indicate, it is also used for
120	throughout libev.	146	time differences (e.g. delays) throughout libev.
121		147
122	=head1 ERROR HANDLING	148	=head1 ERROR HANDLING
123		149
124	Libev knows three classes of errors: operating system errors, usage errors	150	Libev knows three classes of errors: operating system errors, usage errors
125	and internal errors (bugs).	151	and internal errors (bugs).
…		…
149		175
150	=item ev_tstamp ev_time ()	176	=item ev_tstamp ev_time ()
151		177
152	Returns the current time as libev would use it. Please note that the	178	Returns the current time as libev would use it. Please note that the
153	C<ev_now> function is usually faster and also often returns the timestamp	179	C<ev_now> function is usually faster and also often returns the timestamp
154	you actually want to know.	180	you actually want to know. Also interesting is the combination of
		181	C<ev_now_update> and C<ev_now>.
155		182
156	=item ev_sleep (ev_tstamp interval)	183	=item ev_sleep (ev_tstamp interval)
157		184
158	Sleep for the given interval: The current thread will be blocked until	185	Sleep for the given interval: The current thread will be blocked
159	either it is interrupted or the given time interval has passed. Basically	186	until either it is interrupted or the given time interval has
		187	passed (approximately - it might return a bit earlier even if not
		188	interrupted). Returns immediately if C<< interval <= 0 >>.
		189
160	this is a sub-second-resolution C<sleep ()>.	190	Basically this is a sub-second-resolution C<sleep ()>.
		191
		192	The range of the C<interval> is limited - libev only guarantees to work
		193	with sleep times of up to one day (C<< interval <= 86400 >>).
161		194
162	=item int ev_version_major ()	195	=item int ev_version_major ()
163		196
164	=item int ev_version_minor ()	197	=item int ev_version_minor ()
165		198
…		…
176	as this indicates an incompatible change. Minor versions are usually	209	as this indicates an incompatible change. Minor versions are usually
177	compatible to older versions, so a larger minor version alone is usually	210	compatible to older versions, so a larger minor version alone is usually
178	not a problem.	211	not a problem.
179		212
180	Example: Make sure we haven't accidentally been linked against the wrong	213	Example: Make sure we haven't accidentally been linked against the wrong
181	version.	214	version (note, however, that this will not detect other ABI mismatches,
		215	such as LFS or reentrancy).
182		216
183	assert (("libev version mismatch",	217	assert (("libev version mismatch",
184	ev_version_major () == EV_VERSION_MAJOR	218	ev_version_major () == EV_VERSION_MAJOR
185	&& ev_version_minor () >= EV_VERSION_MINOR));	219	&& ev_version_minor () >= EV_VERSION_MINOR));
186		220
…		…
197	assert (("sorry, no epoll, no sex",	231	assert (("sorry, no epoll, no sex",
198	ev_supported_backends () & EVBACKEND_EPOLL));	232	ev_supported_backends () & EVBACKEND_EPOLL));
199		233
200	=item unsigned int ev_recommended_backends ()	234	=item unsigned int ev_recommended_backends ()
201		235
202	Return the set of all backends compiled into this binary of libev and also	236	Return the set of all backends compiled into this binary of libev and
203	recommended for this platform. This set is often smaller than the one	237	also recommended for this platform, meaning it will work for most file
		238	descriptor types. This set is often smaller than the one returned by
204	returned by C<ev_supported_backends>, as for example kqueue is broken on	239	C<ev_supported_backends>, as for example kqueue is broken on most BSDs
205	most BSDs and will not be auto-detected unless you explicitly request it	240	and will not be auto-detected unless you explicitly request it (assuming
206	(assuming you know what you are doing). This is the set of backends that	241	you know what you are doing). This is the set of backends that libev will
207	libev will probe for if you specify no backends explicitly.	242	probe for if you specify no backends explicitly.
208		243
209	=item unsigned int ev_embeddable_backends ()	244	=item unsigned int ev_embeddable_backends ()
210		245
211	Returns the set of backends that are embeddable in other event loops. This	246	Returns the set of backends that are embeddable in other event loops. This
212	is the theoretical, all-platform, value. To find which backends	247	value is platform-specific but can include backends not available on the
213	might be supported on the current system, you would need to look at	248	current system. To find which embeddable backends might be supported on
214	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for	249	the current system, you would need to look at C<ev_embeddable_backends ()
215	recommended ones.	250	& ev_supported_backends ()>, likewise for recommended ones.
216		251
217	See the description of C<ev_embed> watchers for more info.	252	See the description of C<ev_embed> watchers for more info.
218		253
219	=item ev_set_allocator (void *(*cb)(void *ptr, long size)) [NOT REENTRANT]	254	=item ev_set_allocator (void *(*cb)(void *ptr, long size) throw ())
220		255
221	Sets the allocation function to use (the prototype is similar - the	256	Sets the allocation function to use (the prototype is similar - the
222	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is	257	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
223	used to allocate and free memory (no surprises here). If it returns zero	258	used to allocate and free memory (no surprises here). If it returns zero
224	when memory needs to be allocated (C<size != 0>), the library might abort	259	when memory needs to be allocated (C<size != 0>), the library might abort
…		…
230		265
231	You could override this function in high-availability programs to, say,	266	You could override this function in high-availability programs to, say,
232	free some memory if it cannot allocate memory, to use a special allocator,	267	free some memory if it cannot allocate memory, to use a special allocator,
233	or even to sleep a while and retry until some memory is available.	268	or even to sleep a while and retry until some memory is available.
234		269
		270	Example: The following is the C<realloc> function that libev itself uses
		271	which should work with C<realloc> and C<free> functions of all kinds and
		272	is probably a good basis for your own implementation.
		273
		274	static void *
		275	ev_realloc_emul (void *ptr, long size) EV_NOEXCEPT
		276	{
		277	if (size)
		278	return realloc (ptr, size);
		279
		280	free (ptr);
		281	return 0;
		282	}
		283
235	Example: Replace the libev allocator with one that waits a bit and then	284	Example: Replace the libev allocator with one that waits a bit and then
236	retries (example requires a standards-compliant C<realloc>).	285	retries.
237		286
238	static void *	287	static void *
239	persistent_realloc (void *ptr, size_t size)	288	persistent_realloc (void *ptr, size_t size)
240	{	289	{
		290	if (!size)
		291	{
		292	free (ptr);
		293	return 0;
		294	}
		295
241	for (;;)	296	for (;;)
242	{	297	{
243	void *newptr = realloc (ptr, size);	298	void *newptr = realloc (ptr, size);
244		299
245	if (newptr)	300	if (newptr)
…		…
250	}	305	}
251		306
252	...	307	...
253	ev_set_allocator (persistent_realloc);	308	ev_set_allocator (persistent_realloc);
254		309
255	=item ev_set_syserr_cb (void (*cb)(const char *msg)); [NOT REENTRANT]	310	=item ev_set_syserr_cb (void (*cb)(const char *msg) throw ())
256		311
257	Set the callback function to call on a retryable system call error (such	312	Set the callback function to call on a retryable system call error (such
258	as failed select, poll, epoll_wait). The message is a printable string	313	as failed select, poll, epoll_wait). The message is a printable string
259	indicating the system call or subsystem causing the problem. If this	314	indicating the system call or subsystem causing the problem. If this
260	callback is set, then libev will expect it to remedy the situation, no	315	callback is set, then libev will expect it to remedy the situation, no
…		…
272	}	327	}
273		328
274	...	329	...
275	ev_set_syserr_cb (fatal_error);	330	ev_set_syserr_cb (fatal_error);
276		331
		332	=item ev_feed_signal (int signum)
		333
		334	This function can be used to "simulate" a signal receive. It is completely
		335	safe to call this function at any time, from any context, including signal
		336	handlers or random threads.
		337
		338	Its main use is to customise signal handling in your process, especially
		339	in the presence of threads. For example, you could block signals
		340	by default in all threads (and specifying C<EVFLAG_NOSIGMASK> when
		341	creating any loops), and in one thread, use C<sigwait> or any other
		342	mechanism to wait for signals, then "deliver" them to libev by calling
		343	C<ev_feed_signal>.
		344
277	=back	345	=back
278		346
279	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	347	=head1 FUNCTIONS CONTROLLING EVENT LOOPS
280		348
281	An event loop is described by a C<struct ev_loop *> (the C<struct>	349	An event loop is described by a C<struct ev_loop *> (the C<struct> is
282	is I<not> optional in this case, as there is also an C<ev_loop>	350	I<not> optional in this case unless libev 3 compatibility is disabled, as
283	I<function>).	351	libev 3 had an C<ev_loop> function colliding with the struct name).
284		352
285	The library knows two types of such loops, the I<default> loop, which	353	The library knows two types of such loops, the I<default> loop, which
286	supports signals and child events, and dynamically created loops which do	354	supports child process events, and dynamically created event loops which
287	not.	355	do not.
288		356
289	=over 4	357	=over 4
290		358
291	=item struct ev_loop *ev_default_loop (unsigned int flags)	359	=item struct ev_loop *ev_default_loop (unsigned int flags)
292		360
293	This will initialise the default event loop if it hasn't been initialised	361	This returns the "default" event loop object, which is what you should
294	yet and return it. If the default loop could not be initialised, returns	362	normally use when you just need "the event loop". Event loop objects and
295	false. If it already was initialised it simply returns it (and ignores the	363	the C<flags> parameter are described in more detail in the entry for
296	flags. If that is troubling you, check C<ev_backend ()> afterwards).	364	C<ev_loop_new>.
		365
		366	If the default loop is already initialised then this function simply
		367	returns it (and ignores the flags. If that is troubling you, check
		368	C<ev_backend ()> afterwards). Otherwise it will create it with the given
		369	flags, which should almost always be C<0>, unless the caller is also the
		370	one calling C<ev_run> or otherwise qualifies as "the main program".
297		371
298	If you don't know what event loop to use, use the one returned from this	372	If you don't know what event loop to use, use the one returned from this
299	function.	373	function (or via the C<EV_DEFAULT> macro).
300		374
301	Note that this function is I<not> thread-safe, so if you want to use it	375	Note that this function is I<not> thread-safe, so if you want to use it
302	from multiple threads, you have to lock (note also that this is unlikely,	376	from multiple threads, you have to employ some kind of mutex (note also
303	as loops cannot bes hared easily between threads anyway).	377	that this case is unlikely, as loops cannot be shared easily between
		378	threads anyway).
304		379
305	The default loop is the only loop that can handle C<ev_signal> and	380	The default loop is the only loop that can handle C<ev_child> watchers,
306	C<ev_child> watchers, and to do this, it always registers a handler	381	and to do this, it always registers a handler for C<SIGCHLD>. If this is
307	for C<SIGCHLD>. If this is a problem for your application you can either	382	a problem for your application you can either create a dynamic loop with
308	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you	383	C<ev_loop_new> which doesn't do that, or you can simply overwrite the
309	can simply overwrite the C<SIGCHLD> signal handler I<after> calling	384	C<SIGCHLD> signal handler I<after> calling C<ev_default_init>.
310	C<ev_default_init>.	385
		386	Example: This is the most typical usage.
		387
		388	if (!ev_default_loop (0))
		389	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		390
		391	Example: Restrict libev to the select and poll backends, and do not allow
		392	environment settings to be taken into account:
		393
		394	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
		395
		396	=item struct ev_loop *ev_loop_new (unsigned int flags)
		397
		398	This will create and initialise a new event loop object. If the loop
		399	could not be initialised, returns false.
		400
		401	This function is thread-safe, and one common way to use libev with
		402	threads is indeed to create one loop per thread, and using the default
		403	loop in the "main" or "initial" thread.
311		404
312	The flags argument can be used to specify special behaviour or specific	405	The flags argument can be used to specify special behaviour or specific
313	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	406	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
314		407
315	The following flags are supported:	408	The following flags are supported:
…		…
325		418
326	If this flag bit is or'ed into the flag value (or the program runs setuid	419	If this flag bit is or'ed into the flag value (or the program runs setuid
327	or setgid) then libev will I<not> look at the environment variable	420	or setgid) then libev will I<not> look at the environment variable
328	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will	421	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will
329	override the flags completely if it is found in the environment. This is	422	override the flags completely if it is found in the environment. This is
330	useful to try out specific backends to test their performance, or to work	423	useful to try out specific backends to test their performance, to work
331	around bugs.	424	around bugs, or to make libev threadsafe (accessing environment variables
		425	cannot be done in a threadsafe way, but usually it works if no other
		426	thread modifies them).
332		427
333	=item C<EVFLAG_FORKCHECK>	428	=item C<EVFLAG_FORKCHECK>
334		429
335	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after	430	Instead of calling C<ev_loop_fork> manually after a fork, you can also
336	a fork, you can also make libev check for a fork in each iteration by	431	make libev check for a fork in each iteration by enabling this flag.
337	enabling this flag.
338		432
339	This works by calling C<getpid ()> on every iteration of the loop,	433	This works by calling C<getpid ()> on every iteration of the loop,
340	and thus this might slow down your event loop if you do a lot of loop	434	and thus this might slow down your event loop if you do a lot of loop
341	iterations and little real work, but is usually not noticeable (on my	435	iterations and little real work, but is usually not noticeable (on my
342	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence	436	GNU/Linux system for example, C<getpid> is actually a simple 5-insn
343	without a system call and thus I<very> fast, but my GNU/Linux system also has	437	sequence without a system call and thus I<very> fast, but my GNU/Linux
344	C<pthread_atfork> which is even faster).	438	system also has C<pthread_atfork> which is even faster). (Update: glibc
		439	versions 2.25 apparently removed the C<getpid> optimisation again).
345		440
346	The big advantage of this flag is that you can forget about fork (and	441	The big advantage of this flag is that you can forget about fork (and
347	forget about forgetting to tell libev about forking) when you use this	442	forget about forgetting to tell libev about forking, although you still
348	flag.	443	have to ignore C<SIGPIPE>) when you use this flag.
349		444
350	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>	445	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>
351	environment variable.	446	environment variable.
		447
		448	=item C<EVFLAG_NOINOTIFY>
		449
		450	When this flag is specified, then libev will not attempt to use the
		451	I<inotify> API for its C<ev_stat> watchers. Apart from debugging and
		452	testing, this flag can be useful to conserve inotify file descriptors, as
		453	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.
		454
		455	=item C<EVFLAG_SIGNALFD>
		456
		457	When this flag is specified, then libev will attempt to use the
		458	I<signalfd> API for its C<ev_signal> (and C<ev_child>) watchers. This API
		459	delivers signals synchronously, which makes it both faster and might make
		460	it possible to get the queued signal data. It can also simplify signal
		461	handling with threads, as long as you properly block signals in your
		462	threads that are not interested in handling them.
		463
		464	Signalfd will not be used by default as this changes your signal mask, and
		465	there are a lot of shoddy libraries and programs (glib's threadpool for
		466	example) that can't properly initialise their signal masks.
		467
		468	=item C<EVFLAG_NOSIGMASK>
		469
		470	When this flag is specified, then libev will avoid to modify the signal
		471	mask. Specifically, this means you have to make sure signals are unblocked
		472	when you want to receive them.
		473
		474	This behaviour is useful when you want to do your own signal handling, or
		475	want to handle signals only in specific threads and want to avoid libev
		476	unblocking the signals.
		477
		478	It's also required by POSIX in a threaded program, as libev calls
		479	C<sigprocmask>, whose behaviour is officially unspecified.
		480
		481	This flag's behaviour will become the default in future versions of libev.
352		482
353	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	483	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
354		484
355	This is your standard select(2) backend. Not I<completely> standard, as	485	This is your standard select(2) backend. Not I<completely> standard, as
356	libev tries to roll its own fd_set with no limits on the number of fds,	486	libev tries to roll its own fd_set with no limits on the number of fds,
…		…
381	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and	511	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and
382	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.	512	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.
383		513
384	=item C<EVBACKEND_EPOLL> (value 4, Linux)	514	=item C<EVBACKEND_EPOLL> (value 4, Linux)
385		515
		516	Use the Linux-specific epoll(7) interface (for both pre- and post-2.6.9
		517	kernels).
		518
386	For few fds, this backend is a bit little slower than poll and select,	519	For few fds, this backend is a bit little slower than poll and select, but
387	but it scales phenomenally better. While poll and select usually scale	520	it scales phenomenally better. While poll and select usually scale like
388	like O(total_fds) where n is the total number of fds (or the highest fd),	521	O(total_fds) where total_fds is the total number of fds (or the highest
389	epoll scales either O(1) or O(active_fds). The epoll design has a number	522	fd), epoll scales either O(1) or O(active_fds).
390	of shortcomings, such as silently dropping events in some hard-to-detect	523
391	cases and requiring a system call per fd change, no fork support and bad	524	The epoll mechanism deserves honorable mention as the most misdesigned
392	support for dup.	525	of the more advanced event mechanisms: mere annoyances include silently
		526	dropping file descriptors, requiring a system call per change per file
		527	descriptor (and unnecessary guessing of parameters), problems with dup,
		528	returning before the timeout value, resulting in additional iterations
		529	(and only giving 5ms accuracy while select on the same platform gives
		530	0.1ms) and so on. The biggest issue is fork races, however - if a program
		531	forks then I<both> parent and child process have to recreate the epoll
		532	set, which can take considerable time (one syscall per file descriptor)
		533	and is of course hard to detect.
		534
		535	Epoll is also notoriously buggy - embedding epoll fds I<should> work,
		536	but of course I<doesn't>, and epoll just loves to report events for
		537	totally I<different> file descriptors (even already closed ones, so
		538	one cannot even remove them from the set) than registered in the set
		539	(especially on SMP systems). Libev tries to counter these spurious
		540	notifications by employing an additional generation counter and comparing
		541	that against the events to filter out spurious ones, recreating the set
		542	when required. Epoll also erroneously rounds down timeouts, but gives you
		543	no way to know when and by how much, so sometimes you have to busy-wait
		544	because epoll returns immediately despite a nonzero timeout. And last
		545	not least, it also refuses to work with some file descriptors which work
		546	perfectly fine with C<select> (files, many character devices...).
		547
		548	Epoll is truly the train wreck among event poll mechanisms, a frankenpoll,
		549	cobbled together in a hurry, no thought to design or interaction with
		550	others. Oh, the pain, will it ever stop...
393		551
394	While stopping, setting and starting an I/O watcher in the same iteration	552	While stopping, setting and starting an I/O watcher in the same iteration
395	will result in some caching, there is still a system call per such incident	553	will result in some caching, there is still a system call per such
396	(because the fd could point to a different file description now), so its	554	incident (because the same I<file descriptor> could point to a different
397	best to avoid that. Also, C<dup ()>'ed file descriptors might not work	555	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed
398	very well if you register events for both fds.	556	file descriptors might not work very well if you register events for both
399		557	file descriptors.
400	Please note that epoll sometimes generates spurious notifications, so you
401	need to use non-blocking I/O or other means to avoid blocking when no data
402	(or space) is available.
403		558
404	Best performance from this backend is achieved by not unregistering all	559	Best performance from this backend is achieved by not unregistering all
405	watchers for a file descriptor until it has been closed, if possible,	560	watchers for a file descriptor until it has been closed, if possible,
406	i.e. keep at least one watcher active per fd at all times. Stopping and	561	i.e. keep at least one watcher active per fd at all times. Stopping and
407	starting a watcher (without re-setting it) also usually doesn't cause	562	starting a watcher (without re-setting it) also usually doesn't cause
408	extra overhead.	563	extra overhead. A fork can both result in spurious notifications as well
		564	as in libev having to destroy and recreate the epoll object, which can
		565	take considerable time and thus should be avoided.
		566
		567	All this means that, in practice, C<EVBACKEND_SELECT> can be as fast or
		568	faster than epoll for maybe up to a hundred file descriptors, depending on
		569	the usage. So sad.
409		570
410	While nominally embeddable in other event loops, this feature is broken in	571	While nominally embeddable in other event loops, this feature is broken in
411	all kernel versions tested so far.	572	a lot of kernel revisions, but probably(!) works in current versions.
412		573
413	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as	574	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
414	C<EVBACKEND_POLL>.	575	C<EVBACKEND_POLL>.
415		576
		577	=item C<EVBACKEND_LINUXAIO> (value 64, Linux)
		578
		579	Use the Linux-specific Linux AIO (I<not> C<< aio(7) >> but C<<
		580	io_submit(2) >>) event interface available in post-4.18 kernels (but libev
		581	only tries to use it in 4.19+).
		582
		583	This is another Linux train wreck of an event interface.
		584
		585	If this backend works for you (as of this writing, it was very
		586	experimental), it is the best event interface available on Linux and might
		587	be well worth enabling it - if it isn't available in your kernel this will
		588	be detected and this backend will be skipped.
		589
		590	This backend can batch oneshot requests and supports a user-space ring
		591	buffer to receive events. It also doesn't suffer from most of the design
		592	problems of epoll (such as not being able to remove event sources from
		593	the epoll set), and generally sounds too good to be true. Because, this
		594	being the Linux kernel, of course it suffers from a whole new set of
		595	limitations, forcing you to fall back to epoll, inheriting all its design
		596	issues.
		597
		598	For one, it is not easily embeddable (but probably could be done using
		599	an event fd at some extra overhead). It also is subject to a system wide
		600	limit that can be configured in F</proc/sys/fs/aio-max-nr>. If no AIO
		601	requests are left, this backend will be skipped during initialisation, and
		602	will switch to epoll when the loop is active.
		603
		604	Most problematic in practice, however, is that not all file descriptors
		605	work with it. For example, in Linux 5.1, TCP sockets, pipes, event fds,
		606	files, F</dev/null> and many others are supported, but ttys do not work
		607	properly (a known bug that the kernel developers don't care about, see
		608	L<https://lore.kernel.org/patchwork/patch/1047453/>), so this is not
		609	(yet?) a generic event polling interface.
		610
		611	Overall, it seems the Linux developers just don't want it to have a
		612	generic event handling mechanism other than C<select> or C<poll>.
		613
		614	To work around all these problem, the current version of libev uses its
		615	epoll backend as a fallback for file descriptor types that do not work. Or
		616	falls back completely to epoll if the kernel acts up.
		617
		618	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
		619	C<EVBACKEND_POLL>.
		620
416	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	621	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
417		622
418	Kqueue deserves special mention, as at the time of this writing, it was	623	Kqueue deserves special mention, as at the time this backend was
419	broken on all BSDs except NetBSD (usually it doesn't work reliably with	624	implemented, it was broken on all BSDs except NetBSD (usually it doesn't
420	anything but sockets and pipes, except on Darwin, where of course it's	625	work reliably with anything but sockets and pipes, except on Darwin,
421	completely useless). For this reason it's not being "auto-detected" unless	626	where of course it's completely useless). Unlike epoll, however, whose
422	you explicitly specify it in the flags (i.e. using C<EVBACKEND_KQUEUE>) or	627	brokenness is by design, these kqueue bugs can be (and mostly have been)
		628	fixed without API changes to existing programs. For this reason it's not
		629	being "auto-detected" on all platforms unless you explicitly specify it
		630	in the flags (i.e. using C<EVBACKEND_KQUEUE>) or libev was compiled on a
423	libev was compiled on a known-to-be-good (-enough) system like NetBSD.	631	known-to-be-good (-enough) system like NetBSD.
424		632
425	You still can embed kqueue into a normal poll or select backend and use it	633	You still can embed kqueue into a normal poll or select backend and use it
426	only for sockets (after having made sure that sockets work with kqueue on	634	only for sockets (after having made sure that sockets work with kqueue on
427	the target platform). See C<ev_embed> watchers for more info.	635	the target platform). See C<ev_embed> watchers for more info.
428		636
429	It scales in the same way as the epoll backend, but the interface to the	637	It scales in the same way as the epoll backend, but the interface to the
430	kernel is more efficient (which says nothing about its actual speed, of	638	kernel is more efficient (which says nothing about its actual speed, of
431	course). While stopping, setting and starting an I/O watcher does never	639	course). While stopping, setting and starting an I/O watcher does never
432	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to	640	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to
433	two event changes per incident. Support for C<fork ()> is very bad and it	641	two event changes per incident. Support for C<fork ()> is very bad (you
		642	might have to leak fds on fork, but it's more sane than epoll) and it
434	drops fds silently in similarly hard-to-detect cases.	643	drops fds silently in similarly hard-to-detect cases.
435		644
436	This backend usually performs well under most conditions.	645	This backend usually performs well under most conditions.
437		646
438	While nominally embeddable in other event loops, this doesn't work	647	While nominally embeddable in other event loops, this doesn't work
439	everywhere, so you might need to test for this. And since it is broken	648	everywhere, so you might need to test for this. And since it is broken
440	almost everywhere, you should only use it when you have a lot of sockets	649	almost everywhere, you should only use it when you have a lot of sockets
441	(for which it usually works), by embedding it into another event loop	650	(for which it usually works), by embedding it into another event loop
442	(e.g. C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>) and, did I mention it,	651	(e.g. C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> (but C<poll> is of course
443	using it only for sockets.	652	also broken on OS X)) and, did I mention it, using it only for sockets.
444		653
445	This backend maps C<EV_READ> into an C<EVFILT_READ> kevent with	654	This backend maps C<EV_READ> into an C<EVFILT_READ> kevent with
446	C<NOTE_EOF>, and C<EV_WRITE> into an C<EVFILT_WRITE> kevent with	655	C<NOTE_EOF>, and C<EV_WRITE> into an C<EVFILT_WRITE> kevent with
447	C<NOTE_EOF>.	656	C<NOTE_EOF>.
448		657
…		…
456	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	665	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
457		666
458	This uses the Solaris 10 event port mechanism. As with everything on Solaris,	667	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
459	it's really slow, but it still scales very well (O(active_fds)).	668	it's really slow, but it still scales very well (O(active_fds)).
460		669
461	Please note that Solaris event ports can deliver a lot of spurious
462	notifications, so you need to use non-blocking I/O or other means to avoid
463	blocking when no data (or space) is available.
464
465	While this backend scales well, it requires one system call per active	670	While this backend scales well, it requires one system call per active
466	file descriptor per loop iteration. For small and medium numbers of file	671	file descriptor per loop iteration. For small and medium numbers of file
467	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend	672	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
468	might perform better.	673	might perform better.
469		674
470	On the positive side, with the exception of the spurious readiness	675	On the positive side, this backend actually performed fully to
471	notifications, this backend actually performed fully to specification
472	in all tests and is fully embeddable, which is a rare feat among the	676	specification in all tests and is fully embeddable, which is a rare feat
473	OS-specific backends.	677	among the OS-specific backends (I vastly prefer correctness over speed
		678	hacks).
		679
		680	On the negative side, the interface is I<bizarre> - so bizarre that
		681	even sun itself gets it wrong in their code examples: The event polling
		682	function sometimes returns events to the caller even though an error
		683	occurred, but with no indication whether it has done so or not (yes, it's
		684	even documented that way) - deadly for edge-triggered interfaces where you
		685	absolutely have to know whether an event occurred or not because you have
		686	to re-arm the watcher.
		687
		688	Fortunately libev seems to be able to work around these idiocies.
474		689
475	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as	690	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
476	C<EVBACKEND_POLL>.	691	C<EVBACKEND_POLL>.
477		692
478	=item C<EVBACKEND_ALL>	693	=item C<EVBACKEND_ALL>
479		694
480	Try all backends (even potentially broken ones that wouldn't be tried	695	Try all backends (even potentially broken ones that wouldn't be tried
481	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	696	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
482	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	697	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
483		698
484	It is definitely not recommended to use this flag.	699	It is definitely not recommended to use this flag, use whatever
		700	C<ev_recommended_backends ()> returns, or simply do not specify a backend
		701	at all.
		702
		703	=item C<EVBACKEND_MASK>
		704
		705	Not a backend at all, but a mask to select all backend bits from a
		706	C<flags> value, in case you want to mask out any backends from a flags
		707	value (e.g. when modifying the C<LIBEV_FLAGS> environment variable).
485		708
486	=back	709	=back
487		710
488	If one or more of these are or'ed into the flags value, then only these	711	If one or more of the backend flags are or'ed into the flags value,
489	backends will be tried (in the reverse order as listed here). If none are	712	then only these backends will be tried (in the reverse order as listed
490	specified, all backends in C<ev_recommended_backends ()> will be tried.	713	here). If none are specified, all backends in C<ev_recommended_backends
491		714	()> will be tried.
492	Example: This is the most typical usage.
493
494	if (!ev_default_loop (0))
495	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
496
497	Example: Restrict libev to the select and poll backends, and do not allow
498	environment settings to be taken into account:
499
500	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
501
502	Example: Use whatever libev has to offer, but make sure that kqueue is
503	used if available (warning, breaks stuff, best use only with your own
504	private event loop and only if you know the OS supports your types of
505	fds):
506
507	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
508
509	=item struct ev_loop *ev_loop_new (unsigned int flags)
510
511	Similar to C<ev_default_loop>, but always creates a new event loop that is
512	always distinct from the default loop. Unlike the default loop, it cannot
513	handle signal and child watchers, and attempts to do so will be greeted by
514	undefined behaviour (or a failed assertion if assertions are enabled).
515
516	Note that this function I<is> thread-safe, and the recommended way to use
517	libev with threads is indeed to create one loop per thread, and using the
518	default loop in the "main" or "initial" thread.
519		715
520	Example: Try to create a event loop that uses epoll and nothing else.	716	Example: Try to create a event loop that uses epoll and nothing else.
521		717
522	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	718	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
523	if (!epoller)	719	if (!epoller)
524	fatal ("no epoll found here, maybe it hides under your chair");	720	fatal ("no epoll found here, maybe it hides under your chair");
525		721
		722	Example: Use whatever libev has to offer, but make sure that kqueue is
		723	used if available.
		724
		725	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_KQUEUE);
		726
		727	Example: Similarly, on linux, you mgiht want to take advantage of the
		728	linux aio backend if possible, but fall back to something else if that
		729	isn't available.
		730
		731	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_LINUXAIO);
		732
526	=item ev_default_destroy ()	733	=item ev_loop_destroy (loop)
527		734
528	Destroys the default loop again (frees all memory and kernel state	735	Destroys an event loop object (frees all memory and kernel state
529	etc.). None of the active event watchers will be stopped in the normal	736	etc.). None of the active event watchers will be stopped in the normal
530	sense, so e.g. C<ev_is_active> might still return true. It is your	737	sense, so e.g. C<ev_is_active> might still return true. It is your
531	responsibility to either stop all watchers cleanly yourself I<before>	738	responsibility to either stop all watchers cleanly yourself I<before>
532	calling this function, or cope with the fact afterwards (which is usually	739	calling this function, or cope with the fact afterwards (which is usually
533	the easiest thing, you can just ignore the watchers and/or C<free ()> them	740	the easiest thing, you can just ignore the watchers and/or C<free ()> them
534	for example).	741	for example).
535		742
536	Note that certain global state, such as signal state, will not be freed by	743	Note that certain global state, such as signal state (and installed signal
537	this function, and related watchers (such as signal and child watchers)	744	handlers), will not be freed by this function, and related watchers (such
538	would need to be stopped manually.	745	as signal and child watchers) would need to be stopped manually.
539		746
540	In general it is not advisable to call this function except in the	747	This function is normally used on loop objects allocated by
541	rare occasion where you really need to free e.g. the signal handling	748	C<ev_loop_new>, but it can also be used on the default loop returned by
		749	C<ev_default_loop>, in which case it is not thread-safe.
		750
		751	Note that it is not advisable to call this function on the default loop
		752	except in the rare occasion where you really need to free its resources.
542	pipe fds. If you need dynamically allocated loops it is better to use	753	If you need dynamically allocated loops it is better to use C<ev_loop_new>
543	C<ev_loop_new> and C<ev_loop_destroy>).	754	and C<ev_loop_destroy>.
544		755
545	=item ev_loop_destroy (loop)	756	=item ev_loop_fork (loop)
546		757
547	Like C<ev_default_destroy>, but destroys an event loop created by an
548	earlier call to C<ev_loop_new>.
549
550	=item ev_default_fork ()
551
552	This function sets a flag that causes subsequent C<ev_loop> iterations	758	This function sets a flag that causes subsequent C<ev_run> iterations
553	to reinitialise the kernel state for backends that have one. Despite the	759	to reinitialise the kernel state for backends that have one. Despite
554	name, you can call it anytime, but it makes most sense after forking, in	760	the name, you can call it anytime you are allowed to start or stop
555	the child process (or both child and parent, but that again makes little	761	watchers (except inside an C<ev_prepare> callback), but it makes most
556	sense). You I<must> call it in the child before using any of the libev	762	sense after forking, in the child process. You I<must> call it (or use
557	functions, and it will only take effect at the next C<ev_loop> iteration.	763	C<EVFLAG_FORKCHECK>) in the child before resuming or calling C<ev_run>.
		764
		765	In addition, if you want to reuse a loop (via this function or
		766	C<EVFLAG_FORKCHECK>), you I<also> have to ignore C<SIGPIPE>.
		767
		768	Again, you I<have> to call it on I<any> loop that you want to re-use after
		769	a fork, I<even if you do not plan to use the loop in the parent>. This is
		770	because some kernel interfaces *cough* I<kqueue> *cough* do funny things
		771	during fork.
558		772
559	On the other hand, you only need to call this function in the child	773	On the other hand, you only need to call this function in the child
560	process if and only if you want to use the event library in the child. If	774	process if and only if you want to use the event loop in the child. If
561	you just fork+exec, you don't have to call it at all.	775	you just fork+exec or create a new loop in the child, you don't have to
		776	call it at all (in fact, C<epoll> is so badly broken that it makes a
		777	difference, but libev will usually detect this case on its own and do a
		778	costly reset of the backend).
562		779
563	The function itself is quite fast and it's usually not a problem to call	780	The function itself is quite fast and it's usually not a problem to call
564	it just in case after a fork. To make this easy, the function will fit in	781	it just in case after a fork.
565	quite nicely into a call to C<pthread_atfork>:
566		782
		783	Example: Automate calling C<ev_loop_fork> on the default loop when
		784	using pthreads.
		785
		786	static void
		787	post_fork_child (void)
		788	{
		789	ev_loop_fork (EV_DEFAULT);
		790	}
		791
		792	...
567	pthread_atfork (0, 0, ev_default_fork);	793	pthread_atfork (0, 0, post_fork_child);
568
569	=item ev_loop_fork (loop)
570
571	Like C<ev_default_fork>, but acts on an event loop created by
572	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
573	after fork that you want to re-use in the child, and how you do this is
574	entirely your own problem.
575		794
576	=item int ev_is_default_loop (loop)	795	=item int ev_is_default_loop (loop)
577		796
578	Returns true when the given loop is, in fact, the default loop, and false	797	Returns true when the given loop is, in fact, the default loop, and false
579	otherwise.	798	otherwise.
580		799
581	=item unsigned int ev_loop_count (loop)	800	=item unsigned int ev_iteration (loop)
582		801
583	Returns the count of loop iterations for the loop, which is identical to	802	Returns the current iteration count for the event loop, which is identical
584	the number of times libev did poll for new events. It starts at C<0> and	803	to the number of times libev did poll for new events. It starts at C<0>
585	happily wraps around with enough iterations.	804	and happily wraps around with enough iterations.
586		805
587	This value can sometimes be useful as a generation counter of sorts (it	806	This value can sometimes be useful as a generation counter of sorts (it
588	"ticks" the number of loop iterations), as it roughly corresponds with	807	"ticks" the number of loop iterations), as it roughly corresponds with
589	C<ev_prepare> and C<ev_check> calls.	808	C<ev_prepare> and C<ev_check> calls - and is incremented between the
		809	prepare and check phases.
		810
		811	=item unsigned int ev_depth (loop)
		812
		813	Returns the number of times C<ev_run> was entered minus the number of
		814	times C<ev_run> was exited normally, in other words, the recursion depth.
		815
		816	Outside C<ev_run>, this number is zero. In a callback, this number is
		817	C<1>, unless C<ev_run> was invoked recursively (or from another thread),
		818	in which case it is higher.
		819
		820	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread,
		821	throwing an exception etc.), doesn't count as "exit" - consider this
		822	as a hint to avoid such ungentleman-like behaviour unless it's really
		823	convenient, in which case it is fully supported.
590		824
591	=item unsigned int ev_backend (loop)	825	=item unsigned int ev_backend (loop)
592		826
593	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	827	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
594	use.	828	use.
…		…
603		837
604	=item ev_now_update (loop)	838	=item ev_now_update (loop)
605		839
606	Establishes the current time by querying the kernel, updating the time	840	Establishes the current time by querying the kernel, updating the time
607	returned by C<ev_now ()> in the progress. This is a costly operation and	841	returned by C<ev_now ()> in the progress. This is a costly operation and
608	is usually done automatically within C<ev_loop ()>.	842	is usually done automatically within C<ev_run ()>.
609		843
610	This function is rarely useful, but when some event callback runs for a	844	This function is rarely useful, but when some event callback runs for a
611	very long time without entering the event loop, updating libev's idea of	845	very long time without entering the event loop, updating libev's idea of
612	the current time is a good idea.	846	the current time is a good idea.
613		847
614	See also "The special problem of time updates" in the C<ev_timer> section.	848	See also L</The special problem of time updates> in the C<ev_timer> section.
615		849
		850	=item ev_suspend (loop)
		851
		852	=item ev_resume (loop)
		853
		854	These two functions suspend and resume an event loop, for use when the
		855	loop is not used for a while and timeouts should not be processed.
		856
		857	A typical use case would be an interactive program such as a game: When
		858	the user presses C<^Z> to suspend the game and resumes it an hour later it
		859	would be best to handle timeouts as if no time had actually passed while
		860	the program was suspended. This can be achieved by calling C<ev_suspend>
		861	in your C<SIGTSTP> handler, sending yourself a C<SIGSTOP> and calling
		862	C<ev_resume> directly afterwards to resume timer processing.
		863
		864	Effectively, all C<ev_timer> watchers will be delayed by the time spend
		865	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers
		866	will be rescheduled (that is, they will lose any events that would have
		867	occurred while suspended).
		868
		869	After calling C<ev_suspend> you B<must not> call I<any> function on the
		870	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>
		871	without a previous call to C<ev_suspend>.
		872
		873	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the
		874	event loop time (see C<ev_now_update>).
		875
616	=item ev_loop (loop, int flags)	876	=item bool ev_run (loop, int flags)
617		877
618	Finally, this is it, the event handler. This function usually is called	878	Finally, this is it, the event handler. This function usually is called
619	after you initialised all your watchers and you want to start handling	879	after you have initialised all your watchers and you want to start
620	events.	880	handling events. It will ask the operating system for any new events, call
		881	the watcher callbacks, and then repeat the whole process indefinitely: This
		882	is why event loops are called I<loops>.
621		883
622	If the flags argument is specified as C<0>, it will not return until	884	If the flags argument is specified as C<0>, it will keep handling events
623	either no event watchers are active anymore or C<ev_unloop> was called.	885	until either no event watchers are active anymore or C<ev_break> was
		886	called.
624		887
		888	The return value is false if there are no more active watchers (which
		889	usually means "all jobs done" or "deadlock"), and true in all other cases
		890	(which usually means " you should call C<ev_run> again").
		891
625	Please note that an explicit C<ev_unloop> is usually better than	892	Please note that an explicit C<ev_break> is usually better than
626	relying on all watchers to be stopped when deciding when a program has	893	relying on all watchers to be stopped when deciding when a program has
627	finished (especially in interactive programs), but having a program	894	finished (especially in interactive programs), but having a program
628	that automatically loops as long as it has to and no longer by virtue	895	that automatically loops as long as it has to and no longer by virtue
629	of relying on its watchers stopping correctly, that is truly a thing of	896	of relying on its watchers stopping correctly, that is truly a thing of
630	beauty.	897	beauty.
631		898
		899	This function is I<mostly> exception-safe - you can break out of a
		900	C<ev_run> call by calling C<longjmp> in a callback, throwing a C++
		901	exception and so on. This does not decrement the C<ev_depth> value, nor
		902	will it clear any outstanding C<EVBREAK_ONE> breaks.
		903
632	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle	904	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle
633	those events and any already outstanding ones, but will not block your	905	those events and any already outstanding ones, but will not wait and
634	process in case there are no events and will return after one iteration of	906	block your process in case there are no events and will return after one
635	the loop.	907	iteration of the loop. This is sometimes useful to poll and handle new
		908	events while doing lengthy calculations, to keep the program responsive.
636		909
637	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if	910	A flags value of C<EVRUN_ONCE> will look for new events (waiting if
638	necessary) and will handle those and any already outstanding ones. It	911	necessary) and will handle those and any already outstanding ones. It
639	will block your process until at least one new event arrives (which could	912	will block your process until at least one new event arrives (which could
640	be an event internal to libev itself, so there is no guarentee that a	913	be an event internal to libev itself, so there is no guarantee that a
641	user-registered callback will be called), and will return after one	914	user-registered callback will be called), and will return after one
642	iteration of the loop.	915	iteration of the loop.
643		916
644	This is useful if you are waiting for some external event in conjunction	917	This is useful if you are waiting for some external event in conjunction
645	with something not expressible using other libev watchers (i.e. "roll your	918	with something not expressible using other libev watchers (i.e. "roll your
646	own C<ev_loop>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is	919	own C<ev_run>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is
647	usually a better approach for this kind of thing.	920	usually a better approach for this kind of thing.
648		921
649	Here are the gory details of what C<ev_loop> does:	922	Here are the gory details of what C<ev_run> does (this is for your
		923	understanding, not a guarantee that things will work exactly like this in
		924	future versions):
650		925
		926	- Increment loop depth.
		927	- Reset the ev_break status.
651	- Before the first iteration, call any pending watchers.	928	- Before the first iteration, call any pending watchers.
		929	LOOP:
652	* If EVFLAG_FORKCHECK was used, check for a fork.	930	- If EVFLAG_FORKCHECK was used, check for a fork.
653	- If a fork was detected (by any means), queue and call all fork watchers.	931	- If a fork was detected (by any means), queue and call all fork watchers.
654	- Queue and call all prepare watchers.	932	- Queue and call all prepare watchers.
		933	- If ev_break was called, goto FINISH.
655	- If we have been forked, detach and recreate the kernel state	934	- If we have been forked, detach and recreate the kernel state
656	as to not disturb the other process.	935	as to not disturb the other process.
657	- Update the kernel state with all outstanding changes.	936	- Update the kernel state with all outstanding changes.
658	- Update the "event loop time" (ev_now ()).	937	- Update the "event loop time" (ev_now ()).
659	- Calculate for how long to sleep or block, if at all	938	- Calculate for how long to sleep or block, if at all
660	(active idle watchers, EVLOOP_NONBLOCK or not having	939	(active idle watchers, EVRUN_NOWAIT or not having
661	any active watchers at all will result in not sleeping).	940	any active watchers at all will result in not sleeping).
662	- Sleep if the I/O and timer collect interval say so.	941	- Sleep if the I/O and timer collect interval say so.
		942	- Increment loop iteration counter.
663	- Block the process, waiting for any events.	943	- Block the process, waiting for any events.
664	- Queue all outstanding I/O (fd) events.	944	- Queue all outstanding I/O (fd) events.
665	- Update the "event loop time" (ev_now ()), and do time jump adjustments.	945	- Update the "event loop time" (ev_now ()), and do time jump adjustments.
666	- Queue all expired timers.	946	- Queue all expired timers.
667	- Queue all expired periodics.	947	- Queue all expired periodics.
668	- Unless any events are pending now, queue all idle watchers.	948	- Queue all idle watchers with priority higher than that of pending events.
669	- Queue all check watchers.	949	- Queue all check watchers.
670	- Call all queued watchers in reverse order (i.e. check watchers first).	950	- Call all queued watchers in reverse order (i.e. check watchers first).
671	Signals and child watchers are implemented as I/O watchers, and will	951	Signals and child watchers are implemented as I/O watchers, and will
672	be handled here by queueing them when their watcher gets executed.	952	be handled here by queueing them when their watcher gets executed.
673	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	953	- If ev_break has been called, or EVRUN_ONCE or EVRUN_NOWAIT
674	were used, or there are no active watchers, return, otherwise	954	were used, or there are no active watchers, goto FINISH, otherwise
675	continue with step *.	955	continue with step LOOP.
		956	FINISH:
		957	- Reset the ev_break status iff it was EVBREAK_ONE.
		958	- Decrement the loop depth.
		959	- Return.
676		960
677	Example: Queue some jobs and then loop until no events are outstanding	961	Example: Queue some jobs and then loop until no events are outstanding
678	anymore.	962	anymore.
679		963
680	... queue jobs here, make sure they register event watchers as long	964	... queue jobs here, make sure they register event watchers as long
681	... as they still have work to do (even an idle watcher will do..)	965	... as they still have work to do (even an idle watcher will do..)
682	ev_loop (my_loop, 0);	966	ev_run (my_loop, 0);
683	... jobs done or somebody called unloop. yeah!	967	... jobs done or somebody called break. yeah!
684		968
685	=item ev_unloop (loop, how)	969	=item ev_break (loop, how)
686		970
687	Can be used to make a call to C<ev_loop> return early (but only after it	971	Can be used to make a call to C<ev_run> return early (but only after it
688	has processed all outstanding events). The C<how> argument must be either	972	has processed all outstanding events). The C<how> argument must be either
689	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	973	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or
690	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	974	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.
691		975
692	This "unloop state" will be cleared when entering C<ev_loop> again.	976	This "break state" will be cleared on the next call to C<ev_run>.
693		977
694	It is safe to call C<ev_unloop> from otuside any C<ev_loop> calls.	978	It is safe to call C<ev_break> from outside any C<ev_run> calls, too, in
		979	which case it will have no effect.
695		980
696	=item ev_ref (loop)	981	=item ev_ref (loop)
697		982
698	=item ev_unref (loop)	983	=item ev_unref (loop)
699		984
700	Ref/unref can be used to add or remove a reference count on the event	985	Ref/unref can be used to add or remove a reference count on the event
701	loop: Every watcher keeps one reference, and as long as the reference	986	loop: Every watcher keeps one reference, and as long as the reference
702	count is nonzero, C<ev_loop> will not return on its own.	987	count is nonzero, C<ev_run> will not return on its own.
703		988
704	If you have a watcher you never unregister that should not keep C<ev_loop>	989	This is useful when you have a watcher that you never intend to
705	from returning, call ev_unref() after starting, and ev_ref() before	990	unregister, but that nevertheless should not keep C<ev_run> from
		991	returning. In such a case, call C<ev_unref> after starting, and C<ev_ref>
706	stopping it.	992	before stopping it.
707		993
708	As an example, libev itself uses this for its internal signal pipe: It is	994	As an example, libev itself uses this for its internal signal pipe: It
709	not visible to the libev user and should not keep C<ev_loop> from exiting	995	is not visible to the libev user and should not keep C<ev_run> from
710	if no event watchers registered by it are active. It is also an excellent	996	exiting if no event watchers registered by it are active. It is also an
711	way to do this for generic recurring timers or from within third-party	997	excellent way to do this for generic recurring timers or from within
712	libraries. Just remember to I<unref after start> and I<ref before stop>	998	third-party libraries. Just remember to I<unref after start> and I<ref
713	(but only if the watcher wasn't active before, or was active before,	999	before stop> (but only if the watcher wasn't active before, or was active
714	respectively).	1000	before, respectively. Note also that libev might stop watchers itself
		1001	(e.g. non-repeating timers) in which case you have to C<ev_ref>
		1002	in the callback).
715		1003
716	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	1004	Example: Create a signal watcher, but keep it from keeping C<ev_run>
717	running when nothing else is active.	1005	running when nothing else is active.
718		1006
719	ev_signal exitsig;	1007	ev_signal exitsig;
720	ev_signal_init (&exitsig, sig_cb, SIGINT);	1008	ev_signal_init (&exitsig, sig_cb, SIGINT);
721	ev_signal_start (loop, &exitsig);	1009	ev_signal_start (loop, &exitsig);
722	evf_unref (loop);	1010	ev_unref (loop);
723		1011
724	Example: For some weird reason, unregister the above signal handler again.	1012	Example: For some weird reason, unregister the above signal handler again.
725		1013
726	ev_ref (loop);	1014	ev_ref (loop);
727	ev_signal_stop (loop, &exitsig);	1015	ev_signal_stop (loop, &exitsig);
…		…
747	overhead for the actual polling but can deliver many events at once.	1035	overhead for the actual polling but can deliver many events at once.
748		1036
749	By setting a higher I<io collect interval> you allow libev to spend more	1037	By setting a higher I<io collect interval> you allow libev to spend more
750	time collecting I/O events, so you can handle more events per iteration,	1038	time collecting I/O events, so you can handle more events per iteration,
751	at the cost of increasing latency. Timeouts (both C<ev_periodic> and	1039	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
752	C<ev_timer>) will be not affected. Setting this to a non-null value will	1040	C<ev_timer>) will not be affected. Setting this to a non-null value will
753	introduce an additional C<ev_sleep ()> call into most loop iterations.	1041	introduce an additional C<ev_sleep ()> call into most loop iterations. The
		1042	sleep time ensures that libev will not poll for I/O events more often then
		1043	once per this interval, on average (as long as the host time resolution is
		1044	good enough).
754		1045
755	Likewise, by setting a higher I<timeout collect interval> you allow libev	1046	Likewise, by setting a higher I<timeout collect interval> you allow libev
756	to spend more time collecting timeouts, at the expense of increased	1047	to spend more time collecting timeouts, at the expense of increased
757	latency/jitter/inexactness (the watcher callback will be called	1048	latency/jitter/inexactness (the watcher callback will be called
758	later). C<ev_io> watchers will not be affected. Setting this to a non-null	1049	later). C<ev_io> watchers will not be affected. Setting this to a non-null
…		…
760		1051
761	Many (busy) programs can usually benefit by setting the I/O collect	1052	Many (busy) programs can usually benefit by setting the I/O collect
762	interval to a value near C<0.1> or so, which is often enough for	1053	interval to a value near C<0.1> or so, which is often enough for
763	interactive servers (of course not for games), likewise for timeouts. It	1054	interactive servers (of course not for games), likewise for timeouts. It
764	usually doesn't make much sense to set it to a lower value than C<0.01>,	1055	usually doesn't make much sense to set it to a lower value than C<0.01>,
765	as this approaches the timing granularity of most systems.	1056	as this approaches the timing granularity of most systems. Note that if
		1057	you do transactions with the outside world and you can't increase the
		1058	parallelity, then this setting will limit your transaction rate (if you
		1059	need to poll once per transaction and the I/O collect interval is 0.01,
		1060	then you can't do more than 100 transactions per second).
766		1061
767	Setting the I<timeout collect interval> can improve the opportunity for	1062	Setting the I<timeout collect interval> can improve the opportunity for
768	saving power, as the program will "bundle" timer callback invocations that	1063	saving power, as the program will "bundle" timer callback invocations that
769	are "near" in time together, by delaying some, thus reducing the number of	1064	are "near" in time together, by delaying some, thus reducing the number of
770	times the process sleeps and wakes up again. Another useful technique to	1065	times the process sleeps and wakes up again. Another useful technique to
771	reduce iterations/wake-ups is to use C<ev_periodic> watchers and make sure	1066	reduce iterations/wake-ups is to use C<ev_periodic> watchers and make sure
772	they fire on, say, one-second boundaries only.	1067	they fire on, say, one-second boundaries only.
773		1068
		1069	Example: we only need 0.1s timeout granularity, and we wish not to poll
		1070	more often than 100 times per second:
		1071
		1072	ev_set_timeout_collect_interval (EV_DEFAULT_UC_ 0.1);
		1073	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);
		1074
		1075	=item ev_invoke_pending (loop)
		1076
		1077	This call will simply invoke all pending watchers while resetting their
		1078	pending state. Normally, C<ev_run> does this automatically when required,
		1079	but when overriding the invoke callback this call comes handy. This
		1080	function can be invoked from a watcher - this can be useful for example
		1081	when you want to do some lengthy calculation and want to pass further
		1082	event handling to another thread (you still have to make sure only one
		1083	thread executes within C<ev_invoke_pending> or C<ev_run> of course).
		1084
		1085	=item int ev_pending_count (loop)
		1086
		1087	Returns the number of pending watchers - zero indicates that no watchers
		1088	are pending.
		1089
		1090	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))
		1091
		1092	This overrides the invoke pending functionality of the loop: Instead of
		1093	invoking all pending watchers when there are any, C<ev_run> will call
		1094	this callback instead. This is useful, for example, when you want to
		1095	invoke the actual watchers inside another context (another thread etc.).
		1096
		1097	If you want to reset the callback, use C<ev_invoke_pending> as new
		1098	callback.
		1099
		1100	=item ev_set_loop_release_cb (loop, void (*release)(EV_P) throw (), void (*acquire)(EV_P) throw ())
		1101
		1102	Sometimes you want to share the same loop between multiple threads. This
		1103	can be done relatively simply by putting mutex_lock/unlock calls around
		1104	each call to a libev function.
		1105
		1106	However, C<ev_run> can run an indefinite time, so it is not feasible
		1107	to wait for it to return. One way around this is to wake up the event
		1108	loop via C<ev_break> and C<ev_async_send>, another way is to set these
		1109	I<release> and I<acquire> callbacks on the loop.
		1110
		1111	When set, then C<release> will be called just before the thread is
		1112	suspended waiting for new events, and C<acquire> is called just
		1113	afterwards.
		1114
		1115	Ideally, C<release> will just call your mutex_unlock function, and
		1116	C<acquire> will just call the mutex_lock function again.
		1117
		1118	While event loop modifications are allowed between invocations of
		1119	C<release> and C<acquire> (that's their only purpose after all), no
		1120	modifications done will affect the event loop, i.e. adding watchers will
		1121	have no effect on the set of file descriptors being watched, or the time
		1122	waited. Use an C<ev_async> watcher to wake up C<ev_run> when you want it
		1123	to take note of any changes you made.
		1124
		1125	In theory, threads executing C<ev_run> will be async-cancel safe between
		1126	invocations of C<release> and C<acquire>.
		1127
		1128	See also the locking example in the C<THREADS> section later in this
		1129	document.
		1130
		1131	=item ev_set_userdata (loop, void *data)
		1132
		1133	=item void *ev_userdata (loop)
		1134
		1135	Set and retrieve a single C<void *> associated with a loop. When
		1136	C<ev_set_userdata> has never been called, then C<ev_userdata> returns
		1137	C<0>.
		1138
		1139	These two functions can be used to associate arbitrary data with a loop,
		1140	and are intended solely for the C<invoke_pending_cb>, C<release> and
		1141	C<acquire> callbacks described above, but of course can be (ab-)used for
		1142	any other purpose as well.
		1143
774	=item ev_loop_verify (loop)	1144	=item ev_verify (loop)
775		1145
776	This function only does something when C<EV_VERIFY> support has been	1146	This function only does something when C<EV_VERIFY> support has been
777	compiled in, which is the default for non-minimal builds. It tries to go	1147	compiled in, which is the default for non-minimal builds. It tries to go
778	through all internal structures and checks them for validity. If anything	1148	through all internal structures and checks them for validity. If anything
779	is found to be inconsistent, it will print an error message to standard	1149	is found to be inconsistent, it will print an error message to standard
…		…
790		1160
791	In the following description, uppercase C<TYPE> in names stands for the	1161	In the following description, uppercase C<TYPE> in names stands for the
792	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer	1162	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer
793	watchers and C<ev_io_start> for I/O watchers.	1163	watchers and C<ev_io_start> for I/O watchers.
794		1164
795	A watcher is a structure that you create and register to record your	1165	A watcher is an opaque structure that you allocate and register to record
796	interest in some event. For instance, if you want to wait for STDIN to	1166	your interest in some event. To make a concrete example, imagine you want
797	become readable, you would create an C<ev_io> watcher for that:	1167	to wait for STDIN to become readable, you would create an C<ev_io> watcher
		1168	for that:
798		1169
799	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)	1170	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)
800	{	1171	{
801	ev_io_stop (w);	1172	ev_io_stop (w);
802	ev_unloop (loop, EVUNLOOP_ALL);	1173	ev_break (loop, EVBREAK_ALL);
803	}	1174	}
804		1175
805	struct ev_loop *loop = ev_default_loop (0);	1176	struct ev_loop *loop = ev_default_loop (0);
806		1177
807	ev_io stdin_watcher;	1178	ev_io stdin_watcher;
808		1179
809	ev_init (&stdin_watcher, my_cb);	1180	ev_init (&stdin_watcher, my_cb);
810	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);	1181	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
811	ev_io_start (loop, &stdin_watcher);	1182	ev_io_start (loop, &stdin_watcher);
812		1183
813	ev_loop (loop, 0);	1184	ev_run (loop, 0);
814		1185
815	As you can see, you are responsible for allocating the memory for your	1186	As you can see, you are responsible for allocating the memory for your
816	watcher structures (and it is I<usually> a bad idea to do this on the	1187	watcher structures (and it is I<usually> a bad idea to do this on the
817	stack).	1188	stack).
818		1189
819	Each watcher has an associated watcher structure (called C<struct ev_TYPE>	1190	Each watcher has an associated watcher structure (called C<struct ev_TYPE>
820	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).	1191	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).
821		1192
822	Each watcher structure must be initialised by a call to C<ev_init	1193	Each watcher structure must be initialised by a call to C<ev_init (watcher
823	(watcher *, callback)>, which expects a callback to be provided. This	1194	*, callback)>, which expects a callback to be provided. This callback is
824	callback gets invoked each time the event occurs (or, in the case of I/O	1195	invoked each time the event occurs (or, in the case of I/O watchers, each
825	watchers, each time the event loop detects that the file descriptor given	1196	time the event loop detects that the file descriptor given is readable
826	is readable and/or writable).	1197	and/or writable).
827		1198
828	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>	1199	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>
829	macro to configure it, with arguments specific to the watcher type. There	1200	macro to configure it, with arguments specific to the watcher type. There
830	is also a macro to combine initialisation and setting in one call: C<<	1201	is also a macro to combine initialisation and setting in one call: C<<
831	ev_TYPE_init (watcher *, callback, ...) >>.	1202	ev_TYPE_init (watcher *, callback, ...) >>.
…		…
854	=item C<EV_WRITE>	1225	=item C<EV_WRITE>
855		1226
856	The file descriptor in the C<ev_io> watcher has become readable and/or	1227	The file descriptor in the C<ev_io> watcher has become readable and/or
857	writable.	1228	writable.
858		1229
859	=item C<EV_TIMEOUT>	1230	=item C<EV_TIMER>
860		1231
861	The C<ev_timer> watcher has timed out.	1232	The C<ev_timer> watcher has timed out.
862		1233
863	=item C<EV_PERIODIC>	1234	=item C<EV_PERIODIC>
864		1235
…		…
882		1253
883	=item C<EV_PREPARE>	1254	=item C<EV_PREPARE>
884		1255
885	=item C<EV_CHECK>	1256	=item C<EV_CHECK>
886		1257
887	All C<ev_prepare> watchers are invoked just I<before> C<ev_loop> starts	1258	All C<ev_prepare> watchers are invoked just I<before> C<ev_run> starts to
888	to gather new events, and all C<ev_check> watchers are invoked just after	1259	gather new events, and all C<ev_check> watchers are queued (not invoked)
889	C<ev_loop> has gathered them, but before it invokes any callbacks for any	1260	just after C<ev_run> has gathered them, but before it queues any callbacks
		1261	for any received events. That means C<ev_prepare> watchers are the last
		1262	watchers invoked before the event loop sleeps or polls for new events, and
		1263	C<ev_check> watchers will be invoked before any other watchers of the same
		1264	or lower priority within an event loop iteration.
		1265
890	received events. Callbacks of both watcher types can start and stop as	1266	Callbacks of both watcher types can start and stop as many watchers as
891	many watchers as they want, and all of them will be taken into account	1267	they want, and all of them will be taken into account (for example, a
892	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	1268	C<ev_prepare> watcher might start an idle watcher to keep C<ev_run> from
893	C<ev_loop> from blocking).	1269	blocking).
894		1270
895	=item C<EV_EMBED>	1271	=item C<EV_EMBED>
896		1272
897	The embedded event loop specified in the C<ev_embed> watcher needs attention.	1273	The embedded event loop specified in the C<ev_embed> watcher needs attention.
898		1274
899	=item C<EV_FORK>	1275	=item C<EV_FORK>
900		1276
901	The event loop has been resumed in the child process after fork (see	1277	The event loop has been resumed in the child process after fork (see
902	C<ev_fork>).	1278	C<ev_fork>).
903		1279
		1280	=item C<EV_CLEANUP>
		1281
		1282	The event loop is about to be destroyed (see C<ev_cleanup>).
		1283
904	=item C<EV_ASYNC>	1284	=item C<EV_ASYNC>
905		1285
906	The given async watcher has been asynchronously notified (see C<ev_async>).	1286	The given async watcher has been asynchronously notified (see C<ev_async>).
		1287
		1288	=item C<EV_CUSTOM>
		1289
		1290	Not ever sent (or otherwise used) by libev itself, but can be freely used
		1291	by libev users to signal watchers (e.g. via C<ev_feed_event>).
907		1292
908	=item C<EV_ERROR>	1293	=item C<EV_ERROR>
909		1294
910	An unspecified error has occurred, the watcher has been stopped. This might	1295	An unspecified error has occurred, the watcher has been stopped. This might
911	happen because the watcher could not be properly started because libev	1296	happen because the watcher could not be properly started because libev
…		…
949		1334
950	ev_io w;	1335	ev_io w;
951	ev_init (&w, my_cb);	1336	ev_init (&w, my_cb);
952	ev_io_set (&w, STDIN_FILENO, EV_READ);	1337	ev_io_set (&w, STDIN_FILENO, EV_READ);
953		1338
954	=item C<ev_TYPE_set> (ev_TYPE *, [args])	1339	=item C<ev_TYPE_set> (ev_TYPE *watcher, [args])
955		1340
956	This macro initialises the type-specific parts of a watcher. You need to	1341	This macro initialises the type-specific parts of a watcher. You need to
957	call C<ev_init> at least once before you call this macro, but you can	1342	call C<ev_init> at least once before you call this macro, but you can
958	call C<ev_TYPE_set> any number of times. You must not, however, call this	1343	call C<ev_TYPE_set> any number of times. You must not, however, call this
959	macro on a watcher that is active (it can be pending, however, which is a	1344	macro on a watcher that is active (it can be pending, however, which is a
…		…
972		1357
973	Example: Initialise and set an C<ev_io> watcher in one step.	1358	Example: Initialise and set an C<ev_io> watcher in one step.
974		1359
975	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);	1360	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);
976		1361
977	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)	1362	=item C<ev_TYPE_start> (loop, ev_TYPE *watcher)
978		1363
979	Starts (activates) the given watcher. Only active watchers will receive	1364	Starts (activates) the given watcher. Only active watchers will receive
980	events. If the watcher is already active nothing will happen.	1365	events. If the watcher is already active nothing will happen.
981		1366
982	Example: Start the C<ev_io> watcher that is being abused as example in this	1367	Example: Start the C<ev_io> watcher that is being abused as example in this
983	whole section.	1368	whole section.
984		1369
985	ev_io_start (EV_DEFAULT_UC, &w);	1370	ev_io_start (EV_DEFAULT_UC, &w);
986		1371
987	=item C<ev_TYPE_stop> (loop *, ev_TYPE *watcher)	1372	=item C<ev_TYPE_stop> (loop, ev_TYPE *watcher)
988		1373
989	Stops the given watcher if active, and clears the pending status (whether	1374	Stops the given watcher if active, and clears the pending status (whether
990	the watcher was active or not).	1375	the watcher was active or not).
991		1376
992	It is possible that stopped watchers are pending - for example,	1377	It is possible that stopped watchers are pending - for example,
…		…
1012		1397
1013	=item callback ev_cb (ev_TYPE *watcher)	1398	=item callback ev_cb (ev_TYPE *watcher)
1014		1399
1015	Returns the callback currently set on the watcher.	1400	Returns the callback currently set on the watcher.
1016		1401
1017	=item ev_cb_set (ev_TYPE *watcher, callback)	1402	=item ev_set_cb (ev_TYPE *watcher, callback)
1018		1403
1019	Change the callback. You can change the callback at virtually any time	1404	Change the callback. You can change the callback at virtually any time
1020	(modulo threads).	1405	(modulo threads).
1021		1406
1022	=item ev_set_priority (ev_TYPE *watcher, priority)	1407	=item ev_set_priority (ev_TYPE *watcher, int priority)
1023		1408
1024	=item int ev_priority (ev_TYPE *watcher)	1409	=item int ev_priority (ev_TYPE *watcher)
1025		1410
1026	Set and query the priority of the watcher. The priority is a small	1411	Set and query the priority of the watcher. The priority is a small
1027	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>	1412	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
1028	(default: C<-2>). Pending watchers with higher priority will be invoked	1413	(default: C<-2>). Pending watchers with higher priority will be invoked
1029	before watchers with lower priority, but priority will not keep watchers	1414	before watchers with lower priority, but priority will not keep watchers
1030	from being executed (except for C<ev_idle> watchers).	1415	from being executed (except for C<ev_idle> watchers).
1031		1416
1032	This means that priorities are I<only> used for ordering callback
1033	invocation after new events have been received. This is useful, for
1034	example, to reduce latency after idling, or more often, to bind two
1035	watchers on the same event and make sure one is called first.
1036
1037	If you need to suppress invocation when higher priority events are pending	1417	If you need to suppress invocation when higher priority events are pending
1038	you need to look at C<ev_idle> watchers, which provide this functionality.	1418	you need to look at C<ev_idle> watchers, which provide this functionality.
1039		1419
1040	You I<must not> change the priority of a watcher as long as it is active or	1420	You I<must not> change the priority of a watcher as long as it is active or
1041	pending.	1421	pending.
1042
1043	The default priority used by watchers when no priority has been set is
1044	always C<0>, which is supposed to not be too high and not be too low :).
1045		1422
1046	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is	1423	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is
1047	fine, as long as you do not mind that the priority value you query might	1424	fine, as long as you do not mind that the priority value you query might
1048	or might not have been clamped to the valid range.	1425	or might not have been clamped to the valid range.
		1426
		1427	The default priority used by watchers when no priority has been set is
		1428	always C<0>, which is supposed to not be too high and not be too low :).
		1429
		1430	See L</WATCHER PRIORITY MODELS>, below, for a more thorough treatment of
		1431	priorities.
1049		1432
1050	=item ev_invoke (loop, ev_TYPE *watcher, int revents)	1433	=item ev_invoke (loop, ev_TYPE *watcher, int revents)
1051		1434
1052	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither	1435	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
1053	C<loop> nor C<revents> need to be valid as long as the watcher callback	1436	C<loop> nor C<revents> need to be valid as long as the watcher callback
…		…
1061	watcher isn't pending it does nothing and returns C<0>.	1444	watcher isn't pending it does nothing and returns C<0>.
1062		1445
1063	Sometimes it can be useful to "poll" a watcher instead of waiting for its	1446	Sometimes it can be useful to "poll" a watcher instead of waiting for its
1064	callback to be invoked, which can be accomplished with this function.	1447	callback to be invoked, which can be accomplished with this function.
1065		1448
		1449	=item ev_feed_event (loop, ev_TYPE *watcher, int revents)
		1450
		1451	Feeds the given event set into the event loop, as if the specified event
		1452	had happened for the specified watcher (which must be a pointer to an
		1453	initialised but not necessarily started event watcher). Obviously you must
		1454	not free the watcher as long as it has pending events.
		1455
		1456	Stopping the watcher, letting libev invoke it, or calling
		1457	C<ev_clear_pending> will clear the pending event, even if the watcher was
		1458	not started in the first place.
		1459
		1460	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
		1461	functions that do not need a watcher.
		1462
1066	=back	1463	=back
1067		1464
		1465	See also the L</ASSOCIATING CUSTOM DATA WITH A WATCHER> and L</BUILDING YOUR
		1466	OWN COMPOSITE WATCHERS> idioms.
1068		1467
1069	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	1468	=head2 WATCHER STATES
1070		1469
1071	Each watcher has, by default, a member C<void *data> that you can change	1470	There are various watcher states mentioned throughout this manual -
1072	and read at any time: libev will completely ignore it. This can be used	1471	active, pending and so on. In this section these states and the rules to
1073	to associate arbitrary data with your watcher. If you need more data and	1472	transition between them will be described in more detail - and while these
1074	don't want to allocate memory and store a pointer to it in that data	1473	rules might look complicated, they usually do "the right thing".
1075	member, you can also "subclass" the watcher type and provide your own
1076	data:
1077		1474
1078	struct my_io	1475	=over 4
		1476
		1477	=item initialised
		1478
		1479	Before a watcher can be registered with the event loop it has to be
		1480	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
		1481	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
		1482
		1483	In this state it is simply some block of memory that is suitable for
		1484	use in an event loop. It can be moved around, freed, reused etc. at
		1485	will - as long as you either keep the memory contents intact, or call
		1486	C<ev_TYPE_init> again.
		1487
		1488	=item started/running/active
		1489
		1490	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
		1491	property of the event loop, and is actively waiting for events. While in
		1492	this state it cannot be accessed (except in a few documented ways), moved,
		1493	freed or anything else - the only legal thing is to keep a pointer to it,
		1494	and call libev functions on it that are documented to work on active watchers.
		1495
		1496	=item pending
		1497
		1498	If a watcher is active and libev determines that an event it is interested
		1499	in has occurred (such as a timer expiring), it will become pending. It will
		1500	stay in this pending state until either it is stopped or its callback is
		1501	about to be invoked, so it is not normally pending inside the watcher
		1502	callback.
		1503
		1504	The watcher might or might not be active while it is pending (for example,
		1505	an expired non-repeating timer can be pending but no longer active). If it
		1506	is stopped, it can be freely accessed (e.g. by calling C<ev_TYPE_set>),
		1507	but it is still property of the event loop at this time, so cannot be
		1508	moved, freed or reused. And if it is active the rules described in the
		1509	previous item still apply.
		1510
		1511	It is also possible to feed an event on a watcher that is not active (e.g.
		1512	via C<ev_feed_event>), in which case it becomes pending without being
		1513	active.
		1514
		1515	=item stopped
		1516
		1517	A watcher can be stopped implicitly by libev (in which case it might still
		1518	be pending), or explicitly by calling its C<ev_TYPE_stop> function. The
		1519	latter will clear any pending state the watcher might be in, regardless
		1520	of whether it was active or not, so stopping a watcher explicitly before
		1521	freeing it is often a good idea.
		1522
		1523	While stopped (and not pending) the watcher is essentially in the
		1524	initialised state, that is, it can be reused, moved, modified in any way
		1525	you wish (but when you trash the memory block, you need to C<ev_TYPE_init>
		1526	it again).
		1527
		1528	=back
		1529
		1530	=head2 WATCHER PRIORITY MODELS
		1531
		1532	Many event loops support I<watcher priorities>, which are usually small
		1533	integers that influence the ordering of event callback invocation
		1534	between watchers in some way, all else being equal.
		1535
		1536	In libev, Watcher priorities can be set using C<ev_set_priority>. See its
		1537	description for the more technical details such as the actual priority
		1538	range.
		1539
		1540	There are two common ways how these these priorities are being interpreted
		1541	by event loops:
		1542
		1543	In the more common lock-out model, higher priorities "lock out" invocation
		1544	of lower priority watchers, which means as long as higher priority
		1545	watchers receive events, lower priority watchers are not being invoked.
		1546
		1547	The less common only-for-ordering model uses priorities solely to order
		1548	callback invocation within a single event loop iteration: Higher priority
		1549	watchers are invoked before lower priority ones, but they all get invoked
		1550	before polling for new events.
		1551
		1552	Libev uses the second (only-for-ordering) model for all its watchers
		1553	except for idle watchers (which use the lock-out model).
		1554
		1555	The rationale behind this is that implementing the lock-out model for
		1556	watchers is not well supported by most kernel interfaces, and most event
		1557	libraries will just poll for the same events again and again as long as
		1558	their callbacks have not been executed, which is very inefficient in the
		1559	common case of one high-priority watcher locking out a mass of lower
		1560	priority ones.
		1561
		1562	Static (ordering) priorities are most useful when you have two or more
		1563	watchers handling the same resource: a typical usage example is having an
		1564	C<ev_io> watcher to receive data, and an associated C<ev_timer> to handle
		1565	timeouts. Under load, data might be received while the program handles
		1566	other jobs, but since timers normally get invoked first, the timeout
		1567	handler will be executed before checking for data. In that case, giving
		1568	the timer a lower priority than the I/O watcher ensures that I/O will be
		1569	handled first even under adverse conditions (which is usually, but not
		1570	always, what you want).
		1571
		1572	Since idle watchers use the "lock-out" model, meaning that idle watchers
		1573	will only be executed when no same or higher priority watchers have
		1574	received events, they can be used to implement the "lock-out" model when
		1575	required.
		1576
		1577	For example, to emulate how many other event libraries handle priorities,
		1578	you can associate an C<ev_idle> watcher to each such watcher, and in
		1579	the normal watcher callback, you just start the idle watcher. The real
		1580	processing is done in the idle watcher callback. This causes libev to
		1581	continuously poll and process kernel event data for the watcher, but when
		1582	the lock-out case is known to be rare (which in turn is rare :), this is
		1583	workable.
		1584
		1585	Usually, however, the lock-out model implemented that way will perform
		1586	miserably under the type of load it was designed to handle. In that case,
		1587	it might be preferable to stop the real watcher before starting the
		1588	idle watcher, so the kernel will not have to process the event in case
		1589	the actual processing will be delayed for considerable time.
		1590
		1591	Here is an example of an I/O watcher that should run at a strictly lower
		1592	priority than the default, and which should only process data when no
		1593	other events are pending:
		1594
		1595	ev_idle idle; // actual processing watcher
		1596	ev_io io; // actual event watcher
		1597
		1598	static void
		1599	io_cb (EV_P_ ev_io *w, int revents)
1079	{	1600	{
1080	ev_io io;	1601	// stop the I/O watcher, we received the event, but
1081	int otherfd;	1602	// are not yet ready to handle it.
1082	void *somedata;	1603	ev_io_stop (EV_A_ w);
1083	struct whatever *mostinteresting;	1604
		1605	// start the idle watcher to handle the actual event.
		1606	// it will not be executed as long as other watchers
		1607	// with the default priority are receiving events.
		1608	ev_idle_start (EV_A_ &idle);
1084	};	1609	}
1085		1610
1086	...	1611	static void
1087	struct my_io w;	1612	idle_cb (EV_P_ ev_idle *w, int revents)
1088	ev_io_init (&w.io, my_cb, fd, EV_READ);
1089
1090	And since your callback will be called with a pointer to the watcher, you
1091	can cast it back to your own type:
1092
1093	static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)
1094	{	1613	{
1095	struct my_io *w = (struct my_io *)w_;	1614	// actual processing
1096	...	1615	read (STDIN_FILENO, ...);
		1616
		1617	// have to start the I/O watcher again, as
		1618	// we have handled the event
		1619	ev_io_start (EV_P_ &io);
1097	}	1620	}
1098		1621
1099	More interesting and less C-conformant ways of casting your callback type	1622	// initialisation
1100	instead have been omitted.	1623	ev_idle_init (&idle, idle_cb);
		1624	ev_io_init (&io, io_cb, STDIN_FILENO, EV_READ);
		1625	ev_io_start (EV_DEFAULT_ &io);
1101		1626
1102	Another common scenario is to use some data structure with multiple	1627	In the "real" world, it might also be beneficial to start a timer, so that
1103	embedded watchers:	1628	low-priority connections can not be locked out forever under load. This
1104		1629	enables your program to keep a lower latency for important connections
1105	struct my_biggy	1630	during short periods of high load, while not completely locking out less
1106	{	1631	important ones.
1107	int some_data;
1108	ev_timer t1;
1109	ev_timer t2;
1110	}
1111
1112	In this case getting the pointer to C<my_biggy> is a bit more
1113	complicated: Either you store the address of your C<my_biggy> struct
1114	in the C<data> member of the watcher (for woozies), or you need to use
1115	some pointer arithmetic using C<offsetof> inside your watchers (for real
1116	programmers):
1117
1118	#include <stddef.h>
1119
1120	static void
1121	t1_cb (EV_P_ ev_timer *w, int revents)
1122	{
1123	struct my_biggy big = (struct my_biggy *
1124	(((char *)w) - offsetof (struct my_biggy, t1));
1125	}
1126
1127	static void
1128	t2_cb (EV_P_ ev_timer *w, int revents)
1129	{
1130	struct my_biggy big = (struct my_biggy *
1131	(((char *)w) - offsetof (struct my_biggy, t2));
1132	}
1133		1632
1134		1633
1135	=head1 WATCHER TYPES	1634	=head1 WATCHER TYPES
1136		1635
1137	This section describes each watcher in detail, but will not repeat	1636	This section describes each watcher in detail, but will not repeat
…		…
1161	In general you can register as many read and/or write event watchers per	1660	In general you can register as many read and/or write event watchers per
1162	fd as you want (as long as you don't confuse yourself). Setting all file	1661	fd as you want (as long as you don't confuse yourself). Setting all file
1163	descriptors to non-blocking mode is also usually a good idea (but not	1662	descriptors to non-blocking mode is also usually a good idea (but not
1164	required if you know what you are doing).	1663	required if you know what you are doing).
1165		1664
1166	If you cannot use non-blocking mode, then force the use of a
1167	known-to-be-good backend (at the time of this writing, this includes only
1168	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>).
1169
1170	Another thing you have to watch out for is that it is quite easy to	1665	Another thing you have to watch out for is that it is quite easy to
1171	receive "spurious" readiness notifications, that is your callback might	1666	receive "spurious" readiness notifications, that is, your callback might
1172	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1667	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
1173	because there is no data. Not only are some backends known to create a	1668	because there is no data. It is very easy to get into this situation even
1174	lot of those (for example Solaris ports), it is very easy to get into	1669	with a relatively standard program structure. Thus it is best to always
1175	this situation even with a relatively standard program structure. Thus	1670	use non-blocking I/O: An extra C<read>(2) returning C<EAGAIN> is far
1176	it is best to always use non-blocking I/O: An extra C<read>(2) returning
1177	C<EAGAIN> is far preferable to a program hanging until some data arrives.	1671	preferable to a program hanging until some data arrives.
1178		1672
1179	If you cannot run the fd in non-blocking mode (for example you should	1673	If you cannot run the fd in non-blocking mode (for example you should
1180	not play around with an Xlib connection), then you have to separately	1674	not play around with an Xlib connection), then you have to separately
1181	re-test whether a file descriptor is really ready with a known-to-be good	1675	re-test whether a file descriptor is really ready with a known-to-be good
1182	interface such as poll (fortunately in our Xlib example, Xlib already	1676	interface such as poll (fortunately in the case of Xlib, it already does
1183	does this on its own, so its quite safe to use). Some people additionally	1677	this on its own, so its quite safe to use). Some people additionally
1184	use C<SIGALRM> and an interval timer, just to be sure you won't block	1678	use C<SIGALRM> and an interval timer, just to be sure you won't block
1185	indefinitely.	1679	indefinitely.
1186		1680
1187	But really, best use non-blocking mode.	1681	But really, best use non-blocking mode.
1188		1682
1189	=head3 The special problem of disappearing file descriptors	1683	=head3 The special problem of disappearing file descriptors
1190		1684
1191	Some backends (e.g. kqueue, epoll) need to be told about closing a file	1685	Some backends (e.g. kqueue, epoll, linuxaio) need to be told about closing
1192	descriptor (either due to calling C<close> explicitly or any other means,	1686	a file descriptor (either due to calling C<close> explicitly or any other
1193	such as C<dup2>). The reason is that you register interest in some file	1687	means, such as C<dup2>). The reason is that you register interest in some
1194	descriptor, but when it goes away, the operating system will silently drop	1688	file descriptor, but when it goes away, the operating system will silently
1195	this interest. If another file descriptor with the same number then is	1689	drop this interest. If another file descriptor with the same number then
1196	registered with libev, there is no efficient way to see that this is, in	1690	is registered with libev, there is no efficient way to see that this is,
1197	fact, a different file descriptor.	1691	in fact, a different file descriptor.
1198		1692
1199	To avoid having to explicitly tell libev about such cases, libev follows	1693	To avoid having to explicitly tell libev about such cases, libev follows
1200	the following policy: Each time C<ev_io_set> is being called, libev	1694	the following policy: Each time C<ev_io_set> is being called, libev
1201	will assume that this is potentially a new file descriptor, otherwise	1695	will assume that this is potentially a new file descriptor, otherwise
1202	it is assumed that the file descriptor stays the same. That means that	1696	it is assumed that the file descriptor stays the same. That means that
…		…
1216		1710
1217	There is no workaround possible except not registering events	1711	There is no workaround possible except not registering events
1218	for potentially C<dup ()>'ed file descriptors, or to resort to	1712	for potentially C<dup ()>'ed file descriptors, or to resort to
1219	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.	1713	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1220		1714
		1715	=head3 The special problem of files
		1716
		1717	Many people try to use C<select> (or libev) on file descriptors
		1718	representing files, and expect it to become ready when their program
		1719	doesn't block on disk accesses (which can take a long time on their own).
		1720
		1721	However, this cannot ever work in the "expected" way - you get a readiness
		1722	notification as soon as the kernel knows whether and how much data is
		1723	there, and in the case of open files, that's always the case, so you
		1724	always get a readiness notification instantly, and your read (or possibly
		1725	write) will still block on the disk I/O.
		1726
		1727	Another way to view it is that in the case of sockets, pipes, character
		1728	devices and so on, there is another party (the sender) that delivers data
		1729	on its own, but in the case of files, there is no such thing: the disk
		1730	will not send data on its own, simply because it doesn't know what you
		1731	wish to read - you would first have to request some data.
		1732
		1733	Since files are typically not-so-well supported by advanced notification
		1734	mechanism, libev tries hard to emulate POSIX behaviour with respect
		1735	to files, even though you should not use it. The reason for this is
		1736	convenience: sometimes you want to watch STDIN or STDOUT, which is
		1737	usually a tty, often a pipe, but also sometimes files or special devices
		1738	(for example, C<epoll> on Linux works with F</dev/random> but not with
		1739	F</dev/urandom>), and even though the file might better be served with
		1740	asynchronous I/O instead of with non-blocking I/O, it is still useful when
		1741	it "just works" instead of freezing.
		1742
		1743	So avoid file descriptors pointing to files when you know it (e.g. use
		1744	libeio), but use them when it is convenient, e.g. for STDIN/STDOUT, or
		1745	when you rarely read from a file instead of from a socket, and want to
		1746	reuse the same code path.
		1747
1221	=head3 The special problem of fork	1748	=head3 The special problem of fork
1222		1749
1223	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit	1750	Some backends (epoll, kqueue, probably linuxaio) do not support C<fork ()>
1224	useless behaviour. Libev fully supports fork, but needs to be told about	1751	at all or exhibit useless behaviour. Libev fully supports fork, but needs
1225	it in the child.	1752	to be told about it in the child if you want to continue to use it in the
		1753	child.
1226		1754
1227	To support fork in your programs, you either have to call	1755	To support fork in your child processes, you have to call C<ev_loop_fork
1228	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,	1756	()> after a fork in the child, enable C<EVFLAG_FORKCHECK>, or resort to
1229	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or	1757	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1230	C<EVBACKEND_POLL>.
1231		1758
1232	=head3 The special problem of SIGPIPE	1759	=head3 The special problem of SIGPIPE
1233		1760
1234	While not really specific to libev, it is easy to forget about C<SIGPIPE>:	1761	While not really specific to libev, it is easy to forget about C<SIGPIPE>:
1235	when writing to a pipe whose other end has been closed, your program gets	1762	when writing to a pipe whose other end has been closed, your program gets
…		…
1238		1765
1239	So when you encounter spurious, unexplained daemon exits, make sure you	1766	So when you encounter spurious, unexplained daemon exits, make sure you
1240	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon	1767	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
1241	somewhere, as that would have given you a big clue).	1768	somewhere, as that would have given you a big clue).
1242		1769
		1770	=head3 The special problem of accept()ing when you can't
		1771
		1772	Many implementations of the POSIX C<accept> function (for example,
		1773	found in post-2004 Linux) have the peculiar behaviour of not removing a
		1774	connection from the pending queue in all error cases.
		1775
		1776	For example, larger servers often run out of file descriptors (because
		1777	of resource limits), causing C<accept> to fail with C<ENFILE> but not
		1778	rejecting the connection, leading to libev signalling readiness on
		1779	the next iteration again (the connection still exists after all), and
		1780	typically causing the program to loop at 100% CPU usage.
		1781
		1782	Unfortunately, the set of errors that cause this issue differs between
		1783	operating systems, there is usually little the app can do to remedy the
		1784	situation, and no known thread-safe method of removing the connection to
		1785	cope with overload is known (to me).
		1786
		1787	One of the easiest ways to handle this situation is to just ignore it
		1788	- when the program encounters an overload, it will just loop until the
		1789	situation is over. While this is a form of busy waiting, no OS offers an
		1790	event-based way to handle this situation, so it's the best one can do.
		1791
		1792	A better way to handle the situation is to log any errors other than
		1793	C<EAGAIN> and C<EWOULDBLOCK>, making sure not to flood the log with such
		1794	messages, and continue as usual, which at least gives the user an idea of
		1795	what could be wrong ("raise the ulimit!"). For extra points one could stop
		1796	the C<ev_io> watcher on the listening fd "for a while", which reduces CPU
		1797	usage.
		1798
		1799	If your program is single-threaded, then you could also keep a dummy file
		1800	descriptor for overload situations (e.g. by opening F</dev/null>), and
		1801	when you run into C<ENFILE> or C<EMFILE>, close it, run C<accept>,
		1802	close that fd, and create a new dummy fd. This will gracefully refuse
		1803	clients under typical overload conditions.
		1804
		1805	The last way to handle it is to simply log the error and C<exit>, as
		1806	is often done with C<malloc> failures, but this results in an easy
		1807	opportunity for a DoS attack.
1243		1808
1244	=head3 Watcher-Specific Functions	1809	=head3 Watcher-Specific Functions
1245		1810
1246	=over 4	1811	=over 4
1247		1812
…		…
1279	...	1844	...
1280	struct ev_loop *loop = ev_default_init (0);	1845	struct ev_loop *loop = ev_default_init (0);
1281	ev_io stdin_readable;	1846	ev_io stdin_readable;
1282	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);	1847	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
1283	ev_io_start (loop, &stdin_readable);	1848	ev_io_start (loop, &stdin_readable);
1284	ev_loop (loop, 0);	1849	ev_run (loop, 0);
1285		1850
1286		1851
1287	=head2 C<ev_timer> - relative and optionally repeating timeouts	1852	=head2 C<ev_timer> - relative and optionally repeating timeouts
1288		1853
1289	Timer watchers are simple relative timers that generate an event after a	1854	Timer watchers are simple relative timers that generate an event after a
…		…
1294	year, it will still time out after (roughly) one hour. "Roughly" because	1859	year, it will still time out after (roughly) one hour. "Roughly" because
1295	detecting time jumps is hard, and some inaccuracies are unavoidable (the	1860	detecting time jumps is hard, and some inaccuracies are unavoidable (the
1296	monotonic clock option helps a lot here).	1861	monotonic clock option helps a lot here).
1297		1862
1298	The callback is guaranteed to be invoked only I<after> its timeout has	1863	The callback is guaranteed to be invoked only I<after> its timeout has
1299	passed, but if multiple timers become ready during the same loop iteration	1864	passed (not I<at>, so on systems with very low-resolution clocks this
1300	then order of execution is undefined.	1865	might introduce a small delay, see "the special problem of being too
		1866	early", below). If multiple timers become ready during the same loop
		1867	iteration then the ones with earlier time-out values are invoked before
		1868	ones of the same priority with later time-out values (but this is no
		1869	longer true when a callback calls C<ev_run> recursively).
1301		1870
1302	=head3 Be smart about timeouts	1871	=head3 Be smart about timeouts
1303		1872
1304	Many real-world problems involve some kind of timeout, usually for error	1873	Many real-world problems involve some kind of timeout, usually for error
1305	recovery. A typical example is an HTTP request - if the other side hangs,	1874	recovery. A typical example is an HTTP request - if the other side hangs,
…		…
1349	C<after> argument to C<ev_timer_set>, and only ever use the C<repeat>	1918	C<after> argument to C<ev_timer_set>, and only ever use the C<repeat>
1350	member and C<ev_timer_again>.	1919	member and C<ev_timer_again>.
1351		1920
1352	At start:	1921	At start:
1353		1922
1354	ev_timer_init (timer, callback);	1923	ev_init (timer, callback);
1355	timer->repeat = 60.;	1924	timer->repeat = 60.;
1356	ev_timer_again (loop, timer);	1925	ev_timer_again (loop, timer);
1357		1926
1358	Each time there is some activity:	1927	Each time there is some activity:
1359		1928
…		…
1380		1949
1381	In this case, it would be more efficient to leave the C<ev_timer> alone,	1950	In this case, it would be more efficient to leave the C<ev_timer> alone,
1382	but remember the time of last activity, and check for a real timeout only	1951	but remember the time of last activity, and check for a real timeout only
1383	within the callback:	1952	within the callback:
1384		1953
		1954	ev_tstamp timeout = 60.;
1385	ev_tstamp last_activity; // time of last activity	1955	ev_tstamp last_activity; // time of last activity
		1956	ev_timer timer;
1386		1957
1387	static void	1958	static void
1388	callback (EV_P_ ev_timer *w, int revents)	1959	callback (EV_P_ ev_timer *w, int revents)
1389	{	1960	{
1390	ev_tstamp now = ev_now (EV_A);	1961	// calculate when the timeout would happen
1391	ev_tstamp timeout = last_activity + 60.;	1962	ev_tstamp after = last_activity - ev_now (EV_A) + timeout;
1392		1963
1393	// if last_activity + 60. is older than now, we did time out	1964	// if negative, it means we the timeout already occurred
1394	if (timeout < now)	1965	if (after < 0.)
1395	{	1966	{
1396	// timeout occured, take action	1967	// timeout occurred, take action
1397	}	1968	}
1398	else	1969	else
1399	{	1970	{
1400	// callback was invoked, but there was some activity, re-arm	1971	// callback was invoked, but there was some recent
1401	// the watcher to fire in last_activity + 60, which is	1972	// activity. simply restart the timer to time out
1402	// guaranteed to be in the future, so "again" is positive:	1973	// after "after" seconds, which is the earliest time
1403	w->again = timeout - now;	1974	// the timeout can occur.
		1975	ev_timer_set (w, after, 0.);
1404	ev_timer_again (EV_A_ w);	1976	ev_timer_start (EV_A_ w);
1405	}	1977	}
1406	}	1978	}
1407		1979
1408	To summarise the callback: first calculate the real timeout (defined	1980	To summarise the callback: first calculate in how many seconds the
1409	as "60 seconds after the last activity"), then check if that time has	1981	timeout will occur (by calculating the absolute time when it would occur,
1410	been reached, which means something I<did>, in fact, time out. Otherwise	1982	C<last_activity + timeout>, and subtracting the current time, C<ev_now
1411	the callback was invoked too early (C<timeout> is in the future), so	1983	(EV_A)> from that).
1412	re-schedule the timer to fire at that future time, to see if maybe we have
1413	a timeout then.
1414		1984
1415	Note how C<ev_timer_again> is used, taking advantage of the	1985	If this value is negative, then we are already past the timeout, i.e. we
1416	C<ev_timer_again> optimisation when the timer is already running.	1986	timed out, and need to do whatever is needed in this case.
		1987
		1988	Otherwise, we now the earliest time at which the timeout would trigger,
		1989	and simply start the timer with this timeout value.
		1990
		1991	In other words, each time the callback is invoked it will check whether
		1992	the timeout occurred. If not, it will simply reschedule itself to check
		1993	again at the earliest time it could time out. Rinse. Repeat.
1417		1994
1418	This scheme causes more callback invocations (about one every 60 seconds	1995	This scheme causes more callback invocations (about one every 60 seconds
1419	minus half the average time between activity), but virtually no calls to	1996	minus half the average time between activity), but virtually no calls to
1420	libev to change the timeout.	1997	libev to change the timeout.
1421		1998
1422	To start the timer, simply initialise the watcher and set C<last_activity>	1999	To start the machinery, simply initialise the watcher and set
1423	to the current time (meaning we just have some activity :), then call the	2000	C<last_activity> to the current time (meaning there was some activity just
1424	callback, which will "do the right thing" and start the timer:	2001	now), then call the callback, which will "do the right thing" and start
		2002	the timer:
1425		2003
		2004	last_activity = ev_now (EV_A);
1426	ev_timer_init (timer, callback);	2005	ev_init (&timer, callback);
1427	last_activity = ev_now (loop);	2006	callback (EV_A_ &timer, 0);
1428	callback (loop, timer, EV_TIMEOUT);
1429		2007
1430	And when there is some activity, simply store the current time in	2008	When there is some activity, simply store the current time in
1431	C<last_activity>, no libev calls at all:	2009	C<last_activity>, no libev calls at all:
1432		2010
		2011	if (activity detected)
1433	last_actiivty = ev_now (loop);	2012	last_activity = ev_now (EV_A);
		2013
		2014	When your timeout value changes, then the timeout can be changed by simply
		2015	providing a new value, stopping the timer and calling the callback, which
		2016	will again do the right thing (for example, time out immediately :).
		2017
		2018	timeout = new_value;
		2019	ev_timer_stop (EV_A_ &timer);
		2020	callback (EV_A_ &timer, 0);
1434		2021
1435	This technique is slightly more complex, but in most cases where the	2022	This technique is slightly more complex, but in most cases where the
1436	time-out is unlikely to be triggered, much more efficient.	2023	time-out is unlikely to be triggered, much more efficient.
1437
1438	Changing the timeout is trivial as well (if it isn't hard-coded in the
1439	callback :) - just change the timeout and invoke the callback, which will
1440	fix things for you.
1441		2024
1442	=item 4. Wee, just use a double-linked list for your timeouts.	2025	=item 4. Wee, just use a double-linked list for your timeouts.
1443		2026
1444	If there is not one request, but many thousands (millions...), all	2027	If there is not one request, but many thousands (millions...), all
1445	employing some kind of timeout with the same timeout value, then one can	2028	employing some kind of timeout with the same timeout value, then one can
…		…
1472	Method #1 is almost always a bad idea, and buys you nothing. Method #4 is	2055	Method #1 is almost always a bad idea, and buys you nothing. Method #4 is
1473	rather complicated, but extremely efficient, something that really pays	2056	rather complicated, but extremely efficient, something that really pays
1474	off after the first million or so of active timers, i.e. it's usually	2057	off after the first million or so of active timers, i.e. it's usually
1475	overkill :)	2058	overkill :)
1476		2059
		2060	=head3 The special problem of being too early
		2061
		2062	If you ask a timer to call your callback after three seconds, then
		2063	you expect it to be invoked after three seconds - but of course, this
		2064	cannot be guaranteed to infinite precision. Less obviously, it cannot be
		2065	guaranteed to any precision by libev - imagine somebody suspending the
		2066	process with a STOP signal for a few hours for example.
		2067
		2068	So, libev tries to invoke your callback as soon as possible I<after> the
		2069	delay has occurred, but cannot guarantee this.
		2070
		2071	A less obvious failure mode is calling your callback too early: many event
		2072	loops compare timestamps with a "elapsed delay >= requested delay", but
		2073	this can cause your callback to be invoked much earlier than you would
		2074	expect.
		2075
		2076	To see why, imagine a system with a clock that only offers full second
		2077	resolution (think windows if you can't come up with a broken enough OS
		2078	yourself). If you schedule a one-second timer at the time 500.9, then the
		2079	event loop will schedule your timeout to elapse at a system time of 500
		2080	(500.9 truncated to the resolution) + 1, or 501.
		2081
		2082	If an event library looks at the timeout 0.1s later, it will see "501 >=
		2083	501" and invoke the callback 0.1s after it was started, even though a
		2084	one-second delay was requested - this is being "too early", despite best
		2085	intentions.
		2086
		2087	This is the reason why libev will never invoke the callback if the elapsed
		2088	delay equals the requested delay, but only when the elapsed delay is
		2089	larger than the requested delay. In the example above, libev would only invoke
		2090	the callback at system time 502, or 1.1s after the timer was started.
		2091
		2092	So, while libev cannot guarantee that your callback will be invoked
		2093	exactly when requested, it I<can> and I<does> guarantee that the requested
		2094	delay has actually elapsed, or in other words, it always errs on the "too
		2095	late" side of things.
		2096
1477	=head3 The special problem of time updates	2097	=head3 The special problem of time updates
1478		2098
1479	Establishing the current time is a costly operation (it usually takes at	2099	Establishing the current time is a costly operation (it usually takes
1480	least two system calls): EV therefore updates its idea of the current	2100	at least one system call): EV therefore updates its idea of the current
1481	time only before and after C<ev_loop> collects new events, which causes a	2101	time only before and after C<ev_run> collects new events, which causes a
1482	growing difference between C<ev_now ()> and C<ev_time ()> when handling	2102	growing difference between C<ev_now ()> and C<ev_time ()> when handling
1483	lots of events in one iteration.	2103	lots of events in one iteration.
1484		2104
1485	The relative timeouts are calculated relative to the C<ev_now ()>	2105	The relative timeouts are calculated relative to the C<ev_now ()>
1486	time. This is usually the right thing as this timestamp refers to the time	2106	time. This is usually the right thing as this timestamp refers to the time
1487	of the event triggering whatever timeout you are modifying/starting. If	2107	of the event triggering whatever timeout you are modifying/starting. If
1488	you suspect event processing to be delayed and you I<need> to base the	2108	you suspect event processing to be delayed and you I<need> to base the
1489	timeout on the current time, use something like this to adjust for this:	2109	timeout on the current time, use something like the following to adjust
		2110	for it:
1490		2111
1491	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);	2112	ev_timer_set (&timer, after + (ev_time () - ev_now ()), 0.);
1492		2113
1493	If the event loop is suspended for a long time, you can also force an	2114	If the event loop is suspended for a long time, you can also force an
1494	update of the time returned by C<ev_now ()> by calling C<ev_now_update	2115	update of the time returned by C<ev_now ()> by calling C<ev_now_update
1495	()>.	2116	()>, although that will push the event time of all outstanding events
		2117	further into the future.
		2118
		2119	=head3 The special problem of unsynchronised clocks
		2120
		2121	Modern systems have a variety of clocks - libev itself uses the normal
		2122	"wall clock" clock and, if available, the monotonic clock (to avoid time
		2123	jumps).
		2124
		2125	Neither of these clocks is synchronised with each other or any other clock
		2126	on the system, so C<ev_time ()> might return a considerably different time
		2127	than C<gettimeofday ()> or C<time ()>. On a GNU/Linux system, for example,
		2128	a call to C<gettimeofday> might return a second count that is one higher
		2129	than a directly following call to C<time>.
		2130
		2131	The moral of this is to only compare libev-related timestamps with
		2132	C<ev_time ()> and C<ev_now ()>, at least if you want better precision than
		2133	a second or so.
		2134
		2135	One more problem arises due to this lack of synchronisation: if libev uses
		2136	the system monotonic clock and you compare timestamps from C<ev_time>
		2137	or C<ev_now> from when you started your timer and when your callback is
		2138	invoked, you will find that sometimes the callback is a bit "early".
		2139
		2140	This is because C<ev_timer>s work in real time, not wall clock time, so
		2141	libev makes sure your callback is not invoked before the delay happened,
		2142	I<measured according to the real time>, not the system clock.
		2143
		2144	If your timeouts are based on a physical timescale (e.g. "time out this
		2145	connection after 100 seconds") then this shouldn't bother you as it is
		2146	exactly the right behaviour.
		2147
		2148	If you want to compare wall clock/system timestamps to your timers, then
		2149	you need to use C<ev_periodic>s, as these are based on the wall clock
		2150	time, where your comparisons will always generate correct results.
		2151
		2152	=head3 The special problems of suspended animation
		2153
		2154	When you leave the server world it is quite customary to hit machines that
		2155	can suspend/hibernate - what happens to the clocks during such a suspend?
		2156
		2157	Some quick tests made with a Linux 2.6.28 indicate that a suspend freezes
		2158	all processes, while the clocks (C<times>, C<CLOCK_MONOTONIC>) continue
		2159	to run until the system is suspended, but they will not advance while the
		2160	system is suspended. That means, on resume, it will be as if the program
		2161	was frozen for a few seconds, but the suspend time will not be counted
		2162	towards C<ev_timer> when a monotonic clock source is used. The real time
		2163	clock advanced as expected, but if it is used as sole clocksource, then a
		2164	long suspend would be detected as a time jump by libev, and timers would
		2165	be adjusted accordingly.
		2166
		2167	I would not be surprised to see different behaviour in different between
		2168	operating systems, OS versions or even different hardware.
		2169
		2170	The other form of suspend (job control, or sending a SIGSTOP) will see a
		2171	time jump in the monotonic clocks and the realtime clock. If the program
		2172	is suspended for a very long time, and monotonic clock sources are in use,
		2173	then you can expect C<ev_timer>s to expire as the full suspension time
		2174	will be counted towards the timers. When no monotonic clock source is in
		2175	use, then libev will again assume a timejump and adjust accordingly.
		2176
		2177	It might be beneficial for this latter case to call C<ev_suspend>
		2178	and C<ev_resume> in code that handles C<SIGTSTP>, to at least get
		2179	deterministic behaviour in this case (you can do nothing against
		2180	C<SIGSTOP>).
1496		2181
1497	=head3 Watcher-Specific Functions and Data Members	2182	=head3 Watcher-Specific Functions and Data Members
1498		2183
1499	=over 4	2184	=over 4
1500		2185
1501	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	2186	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
1502		2187
1503	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)	2188	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)
1504		2189
1505	Configure the timer to trigger after C<after> seconds. If C<repeat>	2190	Configure the timer to trigger after C<after> seconds (fractional and
1506	is C<0.>, then it will automatically be stopped once the timeout is	2191	negative values are supported). If C<repeat> is C<0.>, then it will
1507	reached. If it is positive, then the timer will automatically be	2192	automatically be stopped once the timeout is reached. If it is positive,
1508	configured to trigger again C<repeat> seconds later, again, and again,	2193	then the timer will automatically be configured to trigger again C<repeat>
1509	until stopped manually.	2194	seconds later, again, and again, until stopped manually.
1510		2195
1511	The timer itself will do a best-effort at avoiding drift, that is, if	2196	The timer itself will do a best-effort at avoiding drift, that is, if
1512	you configure a timer to trigger every 10 seconds, then it will normally	2197	you configure a timer to trigger every 10 seconds, then it will normally
1513	trigger at exactly 10 second intervals. If, however, your program cannot	2198	trigger at exactly 10 second intervals. If, however, your program cannot
1514	keep up with the timer (because it takes longer than those 10 seconds to	2199	keep up with the timer (because it takes longer than those 10 seconds to
1515	do stuff) the timer will not fire more than once per event loop iteration.	2200	do stuff) the timer will not fire more than once per event loop iteration.
1516		2201
1517	=item ev_timer_again (loop, ev_timer *)	2202	=item ev_timer_again (loop, ev_timer *)
1518		2203
1519	This will act as if the timer timed out and restart it again if it is	2204	This will act as if the timer timed out, and restarts it again if it is
1520	repeating. The exact semantics are:	2205	repeating. It basically works like calling C<ev_timer_stop>, updating the
		2206	timeout to the C<repeat> value and calling C<ev_timer_start>.
1521		2207
		2208	The exact semantics are as in the following rules, all of which will be
		2209	applied to the watcher:
		2210
		2211	=over 4
		2212
1522	If the timer is pending, its pending status is cleared.	2213	=item If the timer is pending, the pending status is always cleared.
1523		2214
1524	If the timer is started but non-repeating, stop it (as if it timed out).	2215	=item If the timer is started but non-repeating, stop it (as if it timed
		2216	out, without invoking it).
1525		2217
1526	If the timer is repeating, either start it if necessary (with the	2218	=item If the timer is repeating, make the C<repeat> value the new timeout
1527	C<repeat> value), or reset the running timer to the C<repeat> value.	2219	and start the timer, if necessary.
1528		2220
		2221	=back
		2222
1529	This sounds a bit complicated, see "Be smart about timeouts", above, for a	2223	This sounds a bit complicated, see L</Be smart about timeouts>, above, for a
1530	usage example.	2224	usage example.
		2225
		2226	=item ev_tstamp ev_timer_remaining (loop, ev_timer *)
		2227
		2228	Returns the remaining time until a timer fires. If the timer is active,
		2229	then this time is relative to the current event loop time, otherwise it's
		2230	the timeout value currently configured.
		2231
		2232	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns
		2233	C<5>. When the timer is started and one second passes, C<ev_timer_remaining>
		2234	will return C<4>. When the timer expires and is restarted, it will return
		2235	roughly C<7> (likely slightly less as callback invocation takes some time,
		2236	too), and so on.
1531		2237
1532	=item ev_tstamp repeat [read-write]	2238	=item ev_tstamp repeat [read-write]
1533		2239
1534	The current C<repeat> value. Will be used each time the watcher times out	2240	The current C<repeat> value. Will be used each time the watcher times out
1535	or C<ev_timer_again> is called, and determines the next timeout (if any),	2241	or C<ev_timer_again> is called, and determines the next timeout (if any),
…		…
1561	}	2267	}
1562		2268
1563	ev_timer mytimer;	2269	ev_timer mytimer;
1564	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */	2270	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
1565	ev_timer_again (&mytimer); /* start timer */	2271	ev_timer_again (&mytimer); /* start timer */
1566	ev_loop (loop, 0);	2272	ev_run (loop, 0);
1567		2273
1568	// and in some piece of code that gets executed on any "activity":	2274	// and in some piece of code that gets executed on any "activity":
1569	// reset the timeout to start ticking again at 10 seconds	2275	// reset the timeout to start ticking again at 10 seconds
1570	ev_timer_again (&mytimer);	2276	ev_timer_again (&mytimer);
1571		2277
…		…
1573	=head2 C<ev_periodic> - to cron or not to cron?	2279	=head2 C<ev_periodic> - to cron or not to cron?
1574		2280
1575	Periodic watchers are also timers of a kind, but they are very versatile	2281	Periodic watchers are also timers of a kind, but they are very versatile
1576	(and unfortunately a bit complex).	2282	(and unfortunately a bit complex).
1577		2283
1578	Unlike C<ev_timer>'s, they are not based on real time (or relative time)	2284	Unlike C<ev_timer>, periodic watchers are not based on real time (or
1579	but on wall clock time (absolute time). You can tell a periodic watcher	2285	relative time, the physical time that passes) but on wall clock time
1580	to trigger after some specific point in time. For example, if you tell a	2286	(absolute time, the thing you can read on your calendar or clock). The
1581	periodic watcher to trigger in 10 seconds (by specifying e.g. C<ev_now ()	2287	difference is that wall clock time can run faster or slower than real
1582	+ 10.>, that is, an absolute time not a delay) and then reset your system	2288	time, and time jumps are not uncommon (e.g. when you adjust your
1583	clock to January of the previous year, then it will take more than year	2289	wrist-watch).
1584	to trigger the event (unlike an C<ev_timer>, which would still trigger
1585	roughly 10 seconds later as it uses a relative timeout).
1586		2290
		2291	You can tell a periodic watcher to trigger after some specific point
		2292	in time: for example, if you tell a periodic watcher to trigger "in 10
		2293	seconds" (by specifying e.g. C<ev_now () + 10.>, that is, an absolute time
		2294	not a delay) and then reset your system clock to January of the previous
		2295	year, then it will take a year or more to trigger the event (unlike an
		2296	C<ev_timer>, which would still trigger roughly 10 seconds after starting
		2297	it, as it uses a relative timeout).
		2298
1587	C<ev_periodic>s can also be used to implement vastly more complex timers,	2299	C<ev_periodic> watchers can also be used to implement vastly more complex
1588	such as triggering an event on each "midnight, local time", or other	2300	timers, such as triggering an event on each "midnight, local time", or
1589	complicated rules.	2301	other complicated rules. This cannot easily be done with C<ev_timer>
		2302	watchers, as those cannot react to time jumps.
1590		2303
1591	As with timers, the callback is guaranteed to be invoked only when the	2304	As with timers, the callback is guaranteed to be invoked only when the
1592	time (C<at>) has passed, but if multiple periodic timers become ready	2305	point in time where it is supposed to trigger has passed. If multiple
1593	during the same loop iteration, then order of execution is undefined.	2306	timers become ready during the same loop iteration then the ones with
		2307	earlier time-out values are invoked before ones with later time-out values
		2308	(but this is no longer true when a callback calls C<ev_run> recursively).
1594		2309
1595	=head3 Watcher-Specific Functions and Data Members	2310	=head3 Watcher-Specific Functions and Data Members
1596		2311
1597	=over 4	2312	=over 4
1598		2313
1599	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)	2314	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp offset, ev_tstamp interval, reschedule_cb)
1600		2315
1601	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)	2316	=item ev_periodic_set (ev_periodic *, ev_tstamp offset, ev_tstamp interval, reschedule_cb)
1602		2317
1603	Lots of arguments, lets sort it out... There are basically three modes of	2318	Lots of arguments, let's sort it out... There are basically three modes of
1604	operation, and we will explain them from simplest to most complex:	2319	operation, and we will explain them from simplest to most complex:
1605		2320
1606	=over 4	2321	=over 4
1607		2322
1608	=item * absolute timer (at = time, interval = reschedule_cb = 0)	2323	=item * absolute timer (offset = absolute time, interval = 0, reschedule_cb = 0)
1609		2324
1610	In this configuration the watcher triggers an event after the wall clock	2325	In this configuration the watcher triggers an event after the wall clock
1611	time C<at> has passed. It will not repeat and will not adjust when a time	2326	time C<offset> has passed. It will not repeat and will not adjust when a
1612	jump occurs, that is, if it is to be run at January 1st 2011 then it will	2327	time jump occurs, that is, if it is to be run at January 1st 2011 then it
1613	only run when the system clock reaches or surpasses this time.	2328	will be stopped and invoked when the system clock reaches or surpasses
		2329	this point in time.
1614		2330
1615	=item * repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)	2331	=item * repeating interval timer (offset = offset within interval, interval > 0, reschedule_cb = 0)
1616		2332
1617	In this mode the watcher will always be scheduled to time out at the next	2333	In this mode the watcher will always be scheduled to time out at the next
1618	C<at + N * interval> time (for some integer N, which can also be negative)	2334	C<offset + N * interval> time (for some integer N, which can also be
1619	and then repeat, regardless of any time jumps.	2335	negative) and then repeat, regardless of any time jumps. The C<offset>
		2336	argument is merely an offset into the C<interval> periods.
1620		2337
1621	This can be used to create timers that do not drift with respect to the	2338	This can be used to create timers that do not drift with respect to the
1622	system clock, for example, here is a C<ev_periodic> that triggers each	2339	system clock, for example, here is an C<ev_periodic> that triggers each
1623	hour, on the hour:	2340	hour, on the hour (with respect to UTC):
1624		2341
1625	ev_periodic_set (&periodic, 0., 3600., 0);	2342	ev_periodic_set (&periodic, 0., 3600., 0);
1626		2343
1627	This doesn't mean there will always be 3600 seconds in between triggers,	2344	This doesn't mean there will always be 3600 seconds in between triggers,
1628	but only that the callback will be called when the system time shows a	2345	but only that the callback will be called when the system time shows a
1629	full hour (UTC), or more correctly, when the system time is evenly divisible	2346	full hour (UTC), or more correctly, when the system time is evenly divisible
1630	by 3600.	2347	by 3600.
1631		2348
1632	Another way to think about it (for the mathematically inclined) is that	2349	Another way to think about it (for the mathematically inclined) is that
1633	C<ev_periodic> will try to run the callback in this mode at the next possible	2350	C<ev_periodic> will try to run the callback in this mode at the next possible
1634	time where C<time = at (mod interval)>, regardless of any time jumps.	2351	time where C<time = offset (mod interval)>, regardless of any time jumps.
1635		2352
1636	For numerical stability it is preferable that the C<at> value is near	2353	The C<interval> I<MUST> be positive, and for numerical stability, the
1637	C<ev_now ()> (the current time), but there is no range requirement for	2354	interval value should be higher than C<1/8192> (which is around 100
1638	this value, and in fact is often specified as zero.	2355	microseconds) and C<offset> should be higher than C<0> and should have
		2356	at most a similar magnitude as the current time (say, within a factor of
		2357	ten). Typical values for offset are, in fact, C<0> or something between
		2358	C<0> and C<interval>, which is also the recommended range.
1639		2359
1640	Note also that there is an upper limit to how often a timer can fire (CPU	2360	Note also that there is an upper limit to how often a timer can fire (CPU
1641	speed for example), so if C<interval> is very small then timing stability	2361	speed for example), so if C<interval> is very small then timing stability
1642	will of course deteriorate. Libev itself tries to be exact to be about one	2362	will of course deteriorate. Libev itself tries to be exact to be about one
1643	millisecond (if the OS supports it and the machine is fast enough).	2363	millisecond (if the OS supports it and the machine is fast enough).
1644		2364
1645	=item * manual reschedule mode (at and interval ignored, reschedule_cb = callback)	2365	=item * manual reschedule mode (offset ignored, interval ignored, reschedule_cb = callback)
1646		2366
1647	In this mode the values for C<interval> and C<at> are both being	2367	In this mode the values for C<interval> and C<offset> are both being
1648	ignored. Instead, each time the periodic watcher gets scheduled, the	2368	ignored. Instead, each time the periodic watcher gets scheduled, the
1649	reschedule callback will be called with the watcher as first, and the	2369	reschedule callback will be called with the watcher as first, and the
1650	current time as second argument.	2370	current time as second argument.
1651		2371
1652	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,	2372	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher, ever,
1653	ever, or make ANY event loop modifications whatsoever>.	2373	or make ANY other event loop modifications whatsoever, unless explicitly
		2374	allowed by documentation here>.
1654		2375
1655	If you need to stop it, return C<now + 1e30> (or so, fudge fudge) and stop	2376	If you need to stop it, return C<now + 1e30> (or so, fudge fudge) and stop
1656	it afterwards (e.g. by starting an C<ev_prepare> watcher, which is the	2377	it afterwards (e.g. by starting an C<ev_prepare> watcher, which is the
1657	only event loop modification you are allowed to do).	2378	only event loop modification you are allowed to do).
1658		2379
…		…
1672		2393
1673	NOTE: I<< This callback must always return a time that is higher than or	2394	NOTE: I<< This callback must always return a time that is higher than or
1674	equal to the passed C<now> value >>.	2395	equal to the passed C<now> value >>.
1675		2396
1676	This can be used to create very complex timers, such as a timer that	2397	This can be used to create very complex timers, such as a timer that
1677	triggers on "next midnight, local time". To do this, you would calculate the	2398	triggers on "next midnight, local time". To do this, you would calculate
1678	next midnight after C<now> and return the timestamp value for this. How	2399	the next midnight after C<now> and return the timestamp value for
1679	you do this is, again, up to you (but it is not trivial, which is the main	2400	this. Here is a (completely untested, no error checking) example on how to
1680	reason I omitted it as an example).	2401	do this:
		2402
		2403	#include <time.h>
		2404
		2405	static ev_tstamp
		2406	my_rescheduler (ev_periodic *w, ev_tstamp now)
		2407	{
		2408	time_t tnow = (time_t)now;
		2409	struct tm tm;
		2410	localtime_r (&tnow, &tm);
		2411
		2412	tm.tm_sec = tm.tm_min = tm.tm_hour = 0; // midnight current day
		2413	++tm.tm_mday; // midnight next day
		2414
		2415	return mktime (&tm);
		2416	}
		2417
		2418	Note: this code might run into trouble on days that have more then two
		2419	midnights (beginning and end).
1681		2420
1682	=back	2421	=back
1683		2422
1684	=item ev_periodic_again (loop, ev_periodic *)	2423	=item ev_periodic_again (loop, ev_periodic *)
1685		2424
…		…
1688	a different time than the last time it was called (e.g. in a crond like	2427	a different time than the last time it was called (e.g. in a crond like
1689	program when the crontabs have changed).	2428	program when the crontabs have changed).
1690		2429
1691	=item ev_tstamp ev_periodic_at (ev_periodic *)	2430	=item ev_tstamp ev_periodic_at (ev_periodic *)
1692		2431
1693	When active, returns the absolute time that the watcher is supposed to	2432	When active, returns the absolute time that the watcher is supposed
1694	trigger next.	2433	to trigger next. This is not the same as the C<offset> argument to
		2434	C<ev_periodic_set>, but indeed works even in interval and manual
		2435	rescheduling modes.
1695		2436
1696	=item ev_tstamp offset [read-write]	2437	=item ev_tstamp offset [read-write]
1697		2438
1698	When repeating, this contains the offset value, otherwise this is the	2439	When repeating, this contains the offset value, otherwise this is the
1699	absolute point in time (the C<at> value passed to C<ev_periodic_set>).	2440	absolute point in time (the C<offset> value passed to C<ev_periodic_set>,
		2441	although libev might modify this value for better numerical stability).
1700		2442
1701	Can be modified any time, but changes only take effect when the periodic	2443	Can be modified any time, but changes only take effect when the periodic
1702	timer fires or C<ev_periodic_again> is being called.	2444	timer fires or C<ev_periodic_again> is being called.
1703		2445
1704	=item ev_tstamp interval [read-write]	2446	=item ev_tstamp interval [read-write]
…		…
1720	Example: Call a callback every hour, or, more precisely, whenever the	2462	Example: Call a callback every hour, or, more precisely, whenever the
1721	system time is divisible by 3600. The callback invocation times have	2463	system time is divisible by 3600. The callback invocation times have
1722	potentially a lot of jitter, but good long-term stability.	2464	potentially a lot of jitter, but good long-term stability.
1723		2465
1724	static void	2466	static void
1725	clock_cb (struct ev_loop *loop, ev_io *w, int revents)	2467	clock_cb (struct ev_loop *loop, ev_periodic *w, int revents)
1726	{	2468	{
1727	... its now a full hour (UTC, or TAI or whatever your clock follows)	2469	... its now a full hour (UTC, or TAI or whatever your clock follows)
1728	}	2470	}
1729		2471
1730	ev_periodic hourly_tick;	2472	ev_periodic hourly_tick;
…		…
1747		2489
1748	ev_periodic hourly_tick;	2490	ev_periodic hourly_tick;
1749	ev_periodic_init (&hourly_tick, clock_cb,	2491	ev_periodic_init (&hourly_tick, clock_cb,
1750	fmod (ev_now (loop), 3600.), 3600., 0);	2492	fmod (ev_now (loop), 3600.), 3600., 0);
1751	ev_periodic_start (loop, &hourly_tick);	2493	ev_periodic_start (loop, &hourly_tick);
1752		2494
1753		2495
1754	=head2 C<ev_signal> - signal me when a signal gets signalled!	2496	=head2 C<ev_signal> - signal me when a signal gets signalled!
1755		2497
1756	Signal watchers will trigger an event when the process receives a specific	2498	Signal watchers will trigger an event when the process receives a specific
1757	signal one or more times. Even though signals are very asynchronous, libev	2499	signal one or more times. Even though signals are very asynchronous, libev
1758	will try it's best to deliver signals synchronously, i.e. as part of the	2500	will try its best to deliver signals synchronously, i.e. as part of the
1759	normal event processing, like any other event.	2501	normal event processing, like any other event.
1760		2502
1761	If you want signals asynchronously, just use C<sigaction> as you would	2503	If you want signals to be delivered truly asynchronously, just use
1762	do without libev and forget about sharing the signal. You can even use	2504	C<sigaction> as you would do without libev and forget about sharing
1763	C<ev_async> from a signal handler to synchronously wake up an event loop.	2505	the signal. You can even use C<ev_async> from a signal handler to
		2506	synchronously wake up an event loop.
1764		2507
1765	You can configure as many watchers as you like per signal. Only when the	2508	You can configure as many watchers as you like for the same signal, but
1766	first watcher gets started will libev actually register a signal handler	2509	only within the same loop, i.e. you can watch for C<SIGINT> in your
1767	with the kernel (thus it coexists with your own signal handlers as long as	2510	default loop and for C<SIGIO> in another loop, but you cannot watch for
1768	you don't register any with libev for the same signal). Similarly, when	2511	C<SIGINT> in both the default loop and another loop at the same time. At
1769	the last signal watcher for a signal is stopped, libev will reset the	2512	the moment, C<SIGCHLD> is permanently tied to the default loop.
1770	signal handler to SIG_DFL (regardless of what it was set to before).	2513
		2514	Only after the first watcher for a signal is started will libev actually
		2515	register something with the kernel. It thus coexists with your own signal
		2516	handlers as long as you don't register any with libev for the same signal.
1771		2517
1772	If possible and supported, libev will install its handlers with	2518	If possible and supported, libev will install its handlers with
1773	C<SA_RESTART> behaviour enabled, so system calls should not be unduly	2519	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should
1774	interrupted. If you have a problem with system calls getting interrupted by	2520	not be unduly interrupted. If you have a problem with system calls getting
1775	signals you can block all signals in an C<ev_check> watcher and unblock	2521	interrupted by signals you can block all signals in an C<ev_check> watcher
1776	them in an C<ev_prepare> watcher.	2522	and unblock them in an C<ev_prepare> watcher.
		2523
		2524	=head3 The special problem of inheritance over fork/execve/pthread_create
		2525
		2526	Both the signal mask (C<sigprocmask>) and the signal disposition
		2527	(C<sigaction>) are unspecified after starting a signal watcher (and after
		2528	stopping it again), that is, libev might or might not block the signal,
		2529	and might or might not set or restore the installed signal handler (but
		2530	see C<EVFLAG_NOSIGMASK>).
		2531
		2532	While this does not matter for the signal disposition (libev never
		2533	sets signals to C<SIG_IGN>, so handlers will be reset to C<SIG_DFL> on
		2534	C<execve>), this matters for the signal mask: many programs do not expect
		2535	certain signals to be blocked.
		2536
		2537	This means that before calling C<exec> (from the child) you should reset
		2538	the signal mask to whatever "default" you expect (all clear is a good
		2539	choice usually).
		2540
		2541	The simplest way to ensure that the signal mask is reset in the child is
		2542	to install a fork handler with C<pthread_atfork> that resets it. That will
		2543	catch fork calls done by libraries (such as the libc) as well.
		2544
		2545	In current versions of libev, the signal will not be blocked indefinitely
		2546	unless you use the C<signalfd> API (C<EV_SIGNALFD>). While this reduces
		2547	the window of opportunity for problems, it will not go away, as libev
		2548	I<has> to modify the signal mask, at least temporarily.
		2549
		2550	So I can't stress this enough: I<If you do not reset your signal mask when
		2551	you expect it to be empty, you have a race condition in your code>. This
		2552	is not a libev-specific thing, this is true for most event libraries.
		2553
		2554	=head3 The special problem of threads signal handling
		2555
		2556	POSIX threads has problematic signal handling semantics, specifically,
		2557	a lot of functionality (sigfd, sigwait etc.) only really works if all
		2558	threads in a process block signals, which is hard to achieve.
		2559
		2560	When you want to use sigwait (or mix libev signal handling with your own
		2561	for the same signals), you can tackle this problem by globally blocking
		2562	all signals before creating any threads (or creating them with a fully set
		2563	sigprocmask) and also specifying the C<EVFLAG_NOSIGMASK> when creating
		2564	loops. Then designate one thread as "signal receiver thread" which handles
		2565	these signals. You can pass on any signals that libev might be interested
		2566	in by calling C<ev_feed_signal>.
1777		2567
1778	=head3 Watcher-Specific Functions and Data Members	2568	=head3 Watcher-Specific Functions and Data Members
1779		2569
1780	=over 4	2570	=over 4
1781		2571
…		…
1797	Example: Try to exit cleanly on SIGINT.	2587	Example: Try to exit cleanly on SIGINT.
1798		2588
1799	static void	2589	static void
1800	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)	2590	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)
1801	{	2591	{
1802	ev_unloop (loop, EVUNLOOP_ALL);	2592	ev_break (loop, EVBREAK_ALL);
1803	}	2593	}
1804		2594
1805	ev_signal signal_watcher;	2595	ev_signal signal_watcher;
1806	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	2596	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
1807	ev_signal_start (loop, &signal_watcher);	2597	ev_signal_start (loop, &signal_watcher);
…		…
1813	some child status changes (most typically when a child of yours dies or	2603	some child status changes (most typically when a child of yours dies or
1814	exits). It is permissible to install a child watcher I<after> the child	2604	exits). It is permissible to install a child watcher I<after> the child
1815	has been forked (which implies it might have already exited), as long	2605	has been forked (which implies it might have already exited), as long
1816	as the event loop isn't entered (or is continued from a watcher), i.e.,	2606	as the event loop isn't entered (or is continued from a watcher), i.e.,
1817	forking and then immediately registering a watcher for the child is fine,	2607	forking and then immediately registering a watcher for the child is fine,
1818	but forking and registering a watcher a few event loop iterations later is	2608	but forking and registering a watcher a few event loop iterations later or
1819	not.	2609	in the next callback invocation is not.
1820		2610
1821	Only the default event loop is capable of handling signals, and therefore	2611	Only the default event loop is capable of handling signals, and therefore
1822	you can only register child watchers in the default event loop.	2612	you can only register child watchers in the default event loop.
1823		2613
		2614	Due to some design glitches inside libev, child watchers will always be
		2615	handled at maximum priority (their priority is set to C<EV_MAXPRI> by
		2616	libev)
		2617
1824	=head3 Process Interaction	2618	=head3 Process Interaction
1825		2619
1826	Libev grabs C<SIGCHLD> as soon as the default event loop is	2620	Libev grabs C<SIGCHLD> as soon as the default event loop is
1827	initialised. This is necessary to guarantee proper behaviour even if	2621	initialised. This is necessary to guarantee proper behaviour even if the
1828	the first child watcher is started after the child exits. The occurrence	2622	first child watcher is started after the child exits. The occurrence
1829	of C<SIGCHLD> is recorded asynchronously, but child reaping is done	2623	of C<SIGCHLD> is recorded asynchronously, but child reaping is done
1830	synchronously as part of the event loop processing. Libev always reaps all	2624	synchronously as part of the event loop processing. Libev always reaps all
1831	children, even ones not watched.	2625	children, even ones not watched.
1832		2626
1833	=head3 Overriding the Built-In Processing	2627	=head3 Overriding the Built-In Processing
…		…
1843	=head3 Stopping the Child Watcher	2637	=head3 Stopping the Child Watcher
1844		2638
1845	Currently, the child watcher never gets stopped, even when the	2639	Currently, the child watcher never gets stopped, even when the
1846	child terminates, so normally one needs to stop the watcher in the	2640	child terminates, so normally one needs to stop the watcher in the
1847	callback. Future versions of libev might stop the watcher automatically	2641	callback. Future versions of libev might stop the watcher automatically
1848	when a child exit is detected.	2642	when a child exit is detected (calling C<ev_child_stop> twice is not a
		2643	problem).
1849		2644
1850	=head3 Watcher-Specific Functions and Data Members	2645	=head3 Watcher-Specific Functions and Data Members
1851		2646
1852	=over 4	2647	=over 4
1853		2648
…		…
1910		2705
1911		2706
1912	=head2 C<ev_stat> - did the file attributes just change?	2707	=head2 C<ev_stat> - did the file attributes just change?
1913		2708
1914	This watches a file system path for attribute changes. That is, it calls	2709	This watches a file system path for attribute changes. That is, it calls
1915	C<stat> regularly (or when the OS says it changed) and sees if it changed	2710	C<stat> on that path in regular intervals (or when the OS says it changed)
1916	compared to the last time, invoking the callback if it did.	2711	and sees if it changed compared to the last time, invoking the callback
		2712	if it did. Starting the watcher C<stat>'s the file, so only changes that
		2713	happen after the watcher has been started will be reported.
1917		2714
1918	The path does not need to exist: changing from "path exists" to "path does	2715	The path does not need to exist: changing from "path exists" to "path does
1919	not exist" is a status change like any other. The condition "path does	2716	not exist" is a status change like any other. The condition "path does not
1920	not exist" is signified by the C<st_nlink> field being zero (which is	2717	exist" (or more correctly "path cannot be stat'ed") is signified by the
1921	otherwise always forced to be at least one) and all the other fields of	2718	C<st_nlink> field being zero (which is otherwise always forced to be at
1922	the stat buffer having unspecified contents.	2719	least one) and all the other fields of the stat buffer having unspecified
		2720	contents.
1923		2721
1924	The path I<should> be absolute and I<must not> end in a slash. If it is	2722	The path I<must not> end in a slash or contain special components such as
		2723	C<.> or C<..>. The path I<should> be absolute: If it is relative and
1925	relative and your working directory changes, the behaviour is undefined.	2724	your working directory changes, then the behaviour is undefined.
1926		2725
1927	Since there is no standard kernel interface to do this, the portable	2726	Since there is no portable change notification interface available, the
1928	implementation simply calls C<stat (2)> regularly on the path to see if	2727	portable implementation simply calls C<stat(2)> regularly on the path
1929	it changed somehow. You can specify a recommended polling interval for	2728	to see if it changed somehow. You can specify a recommended polling
1930	this case. If you specify a polling interval of C<0> (highly recommended!)	2729	interval for this case. If you specify a polling interval of C<0> (highly
1931	then a I<suitable, unspecified default> value will be used (which	2730	recommended!) then a I<suitable, unspecified default> value will be used
1932	you can expect to be around five seconds, although this might change	2731	(which you can expect to be around five seconds, although this might
1933	dynamically). Libev will also impose a minimum interval which is currently	2732	change dynamically). Libev will also impose a minimum interval which is
1934	around C<0.1>, but thats usually overkill.	2733	currently around C<0.1>, but that's usually overkill.
1935		2734
1936	This watcher type is not meant for massive numbers of stat watchers,	2735	This watcher type is not meant for massive numbers of stat watchers,
1937	as even with OS-supported change notifications, this can be	2736	as even with OS-supported change notifications, this can be
1938	resource-intensive.	2737	resource-intensive.
1939		2738
1940	At the time of this writing, the only OS-specific interface implemented	2739	At the time of this writing, the only OS-specific interface implemented
1941	is the Linux inotify interface (implementing kqueue support is left as	2740	is the Linux inotify interface (implementing kqueue support is left as an
1942	an exercise for the reader. Note, however, that the author sees no way	2741	exercise for the reader. Note, however, that the author sees no way of
1943	of implementing C<ev_stat> semantics with kqueue).	2742	implementing C<ev_stat> semantics with kqueue, except as a hint).
1944		2743
1945	=head3 ABI Issues (Largefile Support)	2744	=head3 ABI Issues (Largefile Support)
1946		2745
1947	Libev by default (unless the user overrides this) uses the default	2746	Libev by default (unless the user overrides this) uses the default
1948	compilation environment, which means that on systems with large file	2747	compilation environment, which means that on systems with large file
1949	support disabled by default, you get the 32 bit version of the stat	2748	support disabled by default, you get the 32 bit version of the stat
1950	structure. When using the library from programs that change the ABI to	2749	structure. When using the library from programs that change the ABI to
1951	use 64 bit file offsets the programs will fail. In that case you have to	2750	use 64 bit file offsets the programs will fail. In that case you have to
1952	compile libev with the same flags to get binary compatibility. This is	2751	compile libev with the same flags to get binary compatibility. This is
1953	obviously the case with any flags that change the ABI, but the problem is	2752	obviously the case with any flags that change the ABI, but the problem is
1954	most noticeably disabled with ev_stat and large file support.	2753	most noticeably displayed with ev_stat and large file support.
1955		2754
1956	The solution for this is to lobby your distribution maker to make large	2755	The solution for this is to lobby your distribution maker to make large
1957	file interfaces available by default (as e.g. FreeBSD does) and not	2756	file interfaces available by default (as e.g. FreeBSD does) and not
1958	optional. Libev cannot simply switch on large file support because it has	2757	optional. Libev cannot simply switch on large file support because it has
1959	to exchange stat structures with application programs compiled using the	2758	to exchange stat structures with application programs compiled using the
1960	default compilation environment.	2759	default compilation environment.
1961		2760
1962	=head3 Inotify and Kqueue	2761	=head3 Inotify and Kqueue
1963		2762
1964	When C<inotify (7)> support has been compiled into libev (generally	2763	When C<inotify (7)> support has been compiled into libev and present at
1965	only available with Linux 2.6.25 or above due to bugs in earlier	2764	runtime, it will be used to speed up change detection where possible. The
1966	implementations) and present at runtime, it will be used to speed up	2765	inotify descriptor will be created lazily when the first C<ev_stat>
1967	change detection where possible. The inotify descriptor will be created	2766	watcher is being started.
1968	lazily when the first C<ev_stat> watcher is being started.
1969		2767
1970	Inotify presence does not change the semantics of C<ev_stat> watchers	2768	Inotify presence does not change the semantics of C<ev_stat> watchers
1971	except that changes might be detected earlier, and in some cases, to avoid	2769	except that changes might be detected earlier, and in some cases, to avoid
1972	making regular C<stat> calls. Even in the presence of inotify support	2770	making regular C<stat> calls. Even in the presence of inotify support
1973	there are many cases where libev has to resort to regular C<stat> polling,	2771	there are many cases where libev has to resort to regular C<stat> polling,
1974	but as long as the path exists, libev usually gets away without polling.	2772	but as long as kernel 2.6.25 or newer is used (2.6.24 and older have too
		2773	many bugs), the path exists (i.e. stat succeeds), and the path resides on
		2774	a local filesystem (libev currently assumes only ext2/3, jfs, reiserfs and
		2775	xfs are fully working) libev usually gets away without polling.
1975		2776
1976	There is no support for kqueue, as apparently it cannot be used to	2777	There is no support for kqueue, as apparently it cannot be used to
1977	implement this functionality, due to the requirement of having a file	2778	implement this functionality, due to the requirement of having a file
1978	descriptor open on the object at all times, and detecting renames, unlinks	2779	descriptor open on the object at all times, and detecting renames, unlinks
1979	etc. is difficult.	2780	etc. is difficult.
1980		2781
		2782	=head3 C<stat ()> is a synchronous operation
		2783
		2784	Libev doesn't normally do any kind of I/O itself, and so is not blocking
		2785	the process. The exception are C<ev_stat> watchers - those call C<stat
		2786	()>, which is a synchronous operation.
		2787
		2788	For local paths, this usually doesn't matter: unless the system is very
		2789	busy or the intervals between stat's are large, a stat call will be fast,
		2790	as the path data is usually in memory already (except when starting the
		2791	watcher).
		2792
		2793	For networked file systems, calling C<stat ()> can block an indefinite
		2794	time due to network issues, and even under good conditions, a stat call
		2795	often takes multiple milliseconds.
		2796
		2797	Therefore, it is best to avoid using C<ev_stat> watchers on networked
		2798	paths, although this is fully supported by libev.
		2799
1981	=head3 The special problem of stat time resolution	2800	=head3 The special problem of stat time resolution
1982		2801
1983	The C<stat ()> system call only supports full-second resolution portably, and	2802	The C<stat ()> system call only supports full-second resolution portably,
1984	even on systems where the resolution is higher, most file systems still	2803	and even on systems where the resolution is higher, most file systems
1985	only support whole seconds.	2804	still only support whole seconds.
1986		2805
1987	That means that, if the time is the only thing that changes, you can	2806	That means that, if the time is the only thing that changes, you can
1988	easily miss updates: on the first update, C<ev_stat> detects a change and	2807	easily miss updates: on the first update, C<ev_stat> detects a change and
1989	calls your callback, which does something. When there is another update	2808	calls your callback, which does something. When there is another update
1990	within the same second, C<ev_stat> will be unable to detect unless the	2809	within the same second, C<ev_stat> will be unable to detect unless the
…		…
2129	Apart from keeping your process non-blocking (which is a useful	2948	Apart from keeping your process non-blocking (which is a useful
2130	effect on its own sometimes), idle watchers are a good place to do	2949	effect on its own sometimes), idle watchers are a good place to do
2131	"pseudo-background processing", or delay processing stuff to after the	2950	"pseudo-background processing", or delay processing stuff to after the
2132	event loop has handled all outstanding events.	2951	event loop has handled all outstanding events.
2133		2952
		2953	=head3 Abusing an C<ev_idle> watcher for its side-effect
		2954
		2955	As long as there is at least one active idle watcher, libev will never
		2956	sleep unnecessarily. Or in other words, it will loop as fast as possible.
		2957	For this to work, the idle watcher doesn't need to be invoked at all - the
		2958	lowest priority will do.
		2959
		2960	This mode of operation can be useful together with an C<ev_check> watcher,
		2961	to do something on each event loop iteration - for example to balance load
		2962	between different connections.
		2963
		2964	See L</Abusing an ev_check watcher for its side-effect> for a longer
		2965	example.
		2966
2134	=head3 Watcher-Specific Functions and Data Members	2967	=head3 Watcher-Specific Functions and Data Members
2135		2968
2136	=over 4	2969	=over 4
2137		2970
2138	=item ev_idle_init (ev_signal *, callback)	2971	=item ev_idle_init (ev_idle *, callback)
2139		2972
2140	Initialises and configures the idle watcher - it has no parameters of any	2973	Initialises and configures the idle watcher - it has no parameters of any
2141	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,	2974	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,
2142	believe me.	2975	believe me.
2143		2976
…		…
2149	callback, free it. Also, use no error checking, as usual.	2982	callback, free it. Also, use no error checking, as usual.
2150		2983
2151	static void	2984	static void
2152	idle_cb (struct ev_loop *loop, ev_idle *w, int revents)	2985	idle_cb (struct ev_loop *loop, ev_idle *w, int revents)
2153	{	2986	{
		2987	// stop the watcher
		2988	ev_idle_stop (loop, w);
		2989
		2990	// now we can free it
2154	free (w);	2991	free (w);
		2992
2155	// now do something you wanted to do when the program has	2993	// now do something you wanted to do when the program has
2156	// no longer anything immediate to do.	2994	// no longer anything immediate to do.
2157	}	2995	}
2158		2996
2159	ev_idle *idle_watcher = malloc (sizeof (ev_idle));	2997	ev_idle *idle_watcher = malloc (sizeof (ev_idle));
2160	ev_idle_init (idle_watcher, idle_cb);	2998	ev_idle_init (idle_watcher, idle_cb);
2161	ev_idle_start (loop, idle_cb);	2999	ev_idle_start (loop, idle_watcher);
2162		3000
2163		3001
2164	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!	3002	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!
2165		3003
2166	Prepare and check watchers are usually (but not always) used in pairs:	3004	Prepare and check watchers are often (but not always) used in pairs:
2167	prepare watchers get invoked before the process blocks and check watchers	3005	prepare watchers get invoked before the process blocks and check watchers
2168	afterwards.	3006	afterwards.
2169		3007
2170	You I<must not> call C<ev_loop> or similar functions that enter	3008	You I<must not> call C<ev_run> (or similar functions that enter the
2171	the current event loop from either C<ev_prepare> or C<ev_check>	3009	current event loop) or C<ev_loop_fork> from either C<ev_prepare> or
2172	watchers. Other loops than the current one are fine, however. The	3010	C<ev_check> watchers. Other loops than the current one are fine,
2173	rationale behind this is that you do not need to check for recursion in	3011	however. The rationale behind this is that you do not need to check
2174	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,	3012	for recursion in those watchers, i.e. the sequence will always be
2175	C<ev_check> so if you have one watcher of each kind they will always be	3013	C<ev_prepare>, blocking, C<ev_check> so if you have one watcher of each
2176	called in pairs bracketing the blocking call.	3014	kind they will always be called in pairs bracketing the blocking call.
2177		3015
2178	Their main purpose is to integrate other event mechanisms into libev and	3016	Their main purpose is to integrate other event mechanisms into libev and
2179	their use is somewhat advanced. They could be used, for example, to track	3017	their use is somewhat advanced. They could be used, for example, to track
2180	variable changes, implement your own watchers, integrate net-snmp or a	3018	variable changes, implement your own watchers, integrate net-snmp or a
2181	coroutine library and lots more. They are also occasionally useful if	3019	coroutine library and lots more. They are also occasionally useful if
…		…
2199	with priority higher than or equal to the event loop and one coroutine	3037	with priority higher than or equal to the event loop and one coroutine
2200	of lower priority, but only once, using idle watchers to keep the event	3038	of lower priority, but only once, using idle watchers to keep the event
2201	loop from blocking if lower-priority coroutines are active, thus mapping	3039	loop from blocking if lower-priority coroutines are active, thus mapping
2202	low-priority coroutines to idle/background tasks).	3040	low-priority coroutines to idle/background tasks).
2203		3041
2204	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)	3042	When used for this purpose, it is recommended to give C<ev_check> watchers
2205	priority, to ensure that they are being run before any other watchers	3043	highest (C<EV_MAXPRI>) priority, to ensure that they are being run before
2206	after the poll (this doesn't matter for C<ev_prepare> watchers).	3044	any other watchers after the poll (this doesn't matter for C<ev_prepare>
		3045	watchers).
2207		3046
2208	Also, C<ev_check> watchers (and C<ev_prepare> watchers, too) should not	3047	Also, C<ev_check> watchers (and C<ev_prepare> watchers, too) should not
2209	activate ("feed") events into libev. While libev fully supports this, they	3048	activate ("feed") events into libev. While libev fully supports this, they
2210	might get executed before other C<ev_check> watchers did their job. As	3049	might get executed before other C<ev_check> watchers did their job. As
2211	C<ev_check> watchers are often used to embed other (non-libev) event	3050	C<ev_check> watchers are often used to embed other (non-libev) event
2212	loops those other event loops might be in an unusable state until their	3051	loops those other event loops might be in an unusable state until their
2213	C<ev_check> watcher ran (always remind yourself to coexist peacefully with	3052	C<ev_check> watcher ran (always remind yourself to coexist peacefully with
2214	others).	3053	others).
		3054
		3055	=head3 Abusing an C<ev_check> watcher for its side-effect
		3056
		3057	C<ev_check> (and less often also C<ev_prepare>) watchers can also be
		3058	useful because they are called once per event loop iteration. For
		3059	example, if you want to handle a large number of connections fairly, you
		3060	normally only do a bit of work for each active connection, and if there
		3061	is more work to do, you wait for the next event loop iteration, so other
		3062	connections have a chance of making progress.
		3063
		3064	Using an C<ev_check> watcher is almost enough: it will be called on the
		3065	next event loop iteration. However, that isn't as soon as possible -
		3066	without external events, your C<ev_check> watcher will not be invoked.
		3067
		3068	This is where C<ev_idle> watchers come in handy - all you need is a
		3069	single global idle watcher that is active as long as you have one active
		3070	C<ev_check> watcher. The C<ev_idle> watcher makes sure the event loop
		3071	will not sleep, and the C<ev_check> watcher makes sure a callback gets
		3072	invoked. Neither watcher alone can do that.
2215		3073
2216	=head3 Watcher-Specific Functions and Data Members	3074	=head3 Watcher-Specific Functions and Data Members
2217		3075
2218	=over 4	3076	=over 4
2219		3077
…		…
2259	struct pollfd fds [nfd];	3117	struct pollfd fds [nfd];
2260	// actual code will need to loop here and realloc etc.	3118	// actual code will need to loop here and realloc etc.
2261	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));	3119	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
2262		3120
2263	/* the callback is illegal, but won't be called as we stop during check */	3121	/* the callback is illegal, but won't be called as we stop during check */
2264	ev_timer_init (&tw, 0, timeout * 1e-3);	3122	ev_timer_init (&tw, 0, timeout * 1e-3, 0.);
2265	ev_timer_start (loop, &tw);	3123	ev_timer_start (loop, &tw);
2266		3124
2267	// create one ev_io per pollfd	3125	// create one ev_io per pollfd
2268	for (int i = 0; i < nfd; ++i)	3126	for (int i = 0; i < nfd; ++i)
2269	{	3127	{
…		…
2343		3201
2344	if (timeout >= 0)	3202	if (timeout >= 0)
2345	// create/start timer	3203	// create/start timer
2346		3204
2347	// poll	3205	// poll
2348	ev_loop (EV_A_ 0);	3206	ev_run (EV_A_ 0);
2349		3207
2350	// stop timer again	3208	// stop timer again
2351	if (timeout >= 0)	3209	if (timeout >= 0)
2352	ev_timer_stop (EV_A_ &to);	3210	ev_timer_stop (EV_A_ &to);
2353		3211
…		…
2382	some fds have to be watched and handled very quickly (with low latency),	3240	some fds have to be watched and handled very quickly (with low latency),
2383	and even priorities and idle watchers might have too much overhead. In	3241	and even priorities and idle watchers might have too much overhead. In
2384	this case you would put all the high priority stuff in one loop and all	3242	this case you would put all the high priority stuff in one loop and all
2385	the rest in a second one, and embed the second one in the first.	3243	the rest in a second one, and embed the second one in the first.
2386		3244
2387	As long as the watcher is active, the callback will be invoked every time	3245	As long as the watcher is active, the callback will be invoked every
2388	there might be events pending in the embedded loop. The callback must then	3246	time there might be events pending in the embedded loop. The callback
2389	call C<ev_embed_sweep (mainloop, watcher)> to make a single sweep and invoke	3247	must then call C<ev_embed_sweep (mainloop, watcher)> to make a single
2390	their callbacks (you could also start an idle watcher to give the embedded	3248	sweep and invoke their callbacks (the callback doesn't need to invoke the
2391	loop strictly lower priority for example). You can also set the callback	3249	C<ev_embed_sweep> function directly, it could also start an idle watcher
2392	to C<0>, in which case the embed watcher will automatically execute the	3250	to give the embedded loop strictly lower priority for example).
2393	embedded loop sweep.
2394		3251
2395	As long as the watcher is started it will automatically handle events. The	3252	You can also set the callback to C<0>, in which case the embed watcher
2396	callback will be invoked whenever some events have been handled. You can	3253	will automatically execute the embedded loop sweep whenever necessary.
2397	set the callback to C<0> to avoid having to specify one if you are not
2398	interested in that.
2399		3254
2400	Also, there have not currently been made special provisions for forking:	3255	Fork detection will be handled transparently while the C<ev_embed> watcher
2401	when you fork, you not only have to call C<ev_loop_fork> on both loops,	3256	is active, i.e., the embedded loop will automatically be forked when the
2402	but you will also have to stop and restart any C<ev_embed> watchers	3257	embedding loop forks. In other cases, the user is responsible for calling
2403	yourself - but you can use a fork watcher to handle this automatically,	3258	C<ev_loop_fork> on the embedded loop.
2404	and future versions of libev might do just that.
2405		3259
2406	Unfortunately, not all backends are embeddable: only the ones returned by	3260	Unfortunately, not all backends are embeddable: only the ones returned by
2407	C<ev_embeddable_backends> are, which, unfortunately, does not include any	3261	C<ev_embeddable_backends> are, which, unfortunately, does not include any
2408	portable one.	3262	portable one.
2409		3263
…		…
2424		3278
2425	=over 4	3279	=over 4
2426		3280
2427	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)	3281	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
2428		3282
2429	=item ev_embed_set (ev_embed *, callback, struct ev_loop *embedded_loop)	3283	=item ev_embed_set (ev_embed *, struct ev_loop *embedded_loop)
2430		3284
2431	Configures the watcher to embed the given loop, which must be	3285	Configures the watcher to embed the given loop, which must be
2432	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be	3286	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
2433	invoked automatically, otherwise it is the responsibility of the callback	3287	invoked automatically, otherwise it is the responsibility of the callback
2434	to invoke it (it will continue to be called until the sweep has been done,	3288	to invoke it (it will continue to be called until the sweep has been done,
2435	if you do not want that, you need to temporarily stop the embed watcher).	3289	if you do not want that, you need to temporarily stop the embed watcher).
2436		3290
2437	=item ev_embed_sweep (loop, ev_embed *)	3291	=item ev_embed_sweep (loop, ev_embed *)
2438		3292
2439	Make a single, non-blocking sweep over the embedded loop. This works	3293	Make a single, non-blocking sweep over the embedded loop. This works
2440	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	3294	similarly to C<ev_run (embedded_loop, EVRUN_NOWAIT)>, but in the most
2441	appropriate way for embedded loops.	3295	appropriate way for embedded loops.
2442		3296
2443	=item struct ev_loop *other [read-only]	3297	=item struct ev_loop *other [read-only]
2444		3298
2445	The embedded event loop.	3299	The embedded event loop.
…		…
2455	used).	3309	used).
2456		3310
2457	struct ev_loop *loop_hi = ev_default_init (0);	3311	struct ev_loop *loop_hi = ev_default_init (0);
2458	struct ev_loop *loop_lo = 0;	3312	struct ev_loop *loop_lo = 0;
2459	ev_embed embed;	3313	ev_embed embed;
2460		3314
2461	// see if there is a chance of getting one that works	3315	// see if there is a chance of getting one that works
2462	// (remember that a flags value of 0 means autodetection)	3316	// (remember that a flags value of 0 means autodetection)
2463	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()	3317	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()
2464	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())	3318	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())
2465	: 0;	3319	: 0;
…		…
2479	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).	3333	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
2480		3334
2481	struct ev_loop *loop = ev_default_init (0);	3335	struct ev_loop *loop = ev_default_init (0);
2482	struct ev_loop *loop_socket = 0;	3336	struct ev_loop *loop_socket = 0;
2483	ev_embed embed;	3337	ev_embed embed;
2484		3338
2485	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)	3339	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
2486	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))	3340	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
2487	{	3341	{
2488	ev_embed_init (&embed, 0, loop_socket);	3342	ev_embed_init (&embed, 0, loop_socket);
2489	ev_embed_start (loop, &embed);	3343	ev_embed_start (loop, &embed);
…		…
2497		3351
2498	=head2 C<ev_fork> - the audacity to resume the event loop after a fork	3352	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
2499		3353
2500	Fork watchers are called when a C<fork ()> was detected (usually because	3354	Fork watchers are called when a C<fork ()> was detected (usually because
2501	whoever is a good citizen cared to tell libev about it by calling	3355	whoever is a good citizen cared to tell libev about it by calling
2502	C<ev_default_fork> or C<ev_loop_fork>). The invocation is done before the	3356	C<ev_loop_fork>). The invocation is done before the event loop blocks next
2503	event loop blocks next and before C<ev_check> watchers are being called,	3357	and before C<ev_check> watchers are being called, and only in the child
2504	and only in the child after the fork. If whoever good citizen calling	3358	after the fork. If whoever good citizen calling C<ev_default_fork> cheats
2505	C<ev_default_fork> cheats and calls it in the wrong process, the fork	3359	and calls it in the wrong process, the fork handlers will be invoked, too,
2506	handlers will be invoked, too, of course.	3360	of course.
		3361
		3362	=head3 The special problem of life after fork - how is it possible?
		3363
		3364	Most uses of C<fork ()> consist of forking, then some simple calls to set
		3365	up/change the process environment, followed by a call to C<exec()>. This
		3366	sequence should be handled by libev without any problems.
		3367
		3368	This changes when the application actually wants to do event handling
		3369	in the child, or both parent in child, in effect "continuing" after the
		3370	fork.
		3371
		3372	The default mode of operation (for libev, with application help to detect
		3373	forks) is to duplicate all the state in the child, as would be expected
		3374	when I<either> the parent I<or> the child process continues.
		3375
		3376	When both processes want to continue using libev, then this is usually the
		3377	wrong result. In that case, usually one process (typically the parent) is
		3378	supposed to continue with all watchers in place as before, while the other
		3379	process typically wants to start fresh, i.e. without any active watchers.
		3380
		3381	The cleanest and most efficient way to achieve that with libev is to
		3382	simply create a new event loop, which of course will be "empty", and
		3383	use that for new watchers. This has the advantage of not touching more
		3384	memory than necessary, and thus avoiding the copy-on-write, and the
		3385	disadvantage of having to use multiple event loops (which do not support
		3386	signal watchers).
		3387
		3388	When this is not possible, or you want to use the default loop for
		3389	other reasons, then in the process that wants to start "fresh", call
		3390	C<ev_loop_destroy (EV_DEFAULT)> followed by C<ev_default_loop (...)>.
		3391	Destroying the default loop will "orphan" (not stop) all registered
		3392	watchers, so you have to be careful not to execute code that modifies
		3393	those watchers. Note also that in that case, you have to re-register any
		3394	signal watchers.
2507		3395
2508	=head3 Watcher-Specific Functions and Data Members	3396	=head3 Watcher-Specific Functions and Data Members
2509		3397
2510	=over 4	3398	=over 4
2511		3399
2512	=item ev_fork_init (ev_signal *, callback)	3400	=item ev_fork_init (ev_fork *, callback)
2513		3401
2514	Initialises and configures the fork watcher - it has no parameters of any	3402	Initialises and configures the fork watcher - it has no parameters of any
2515	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	3403	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
2516	believe me.	3404	really.
2517		3405
2518	=back	3406	=back
2519		3407
2520		3408
		3409	=head2 C<ev_cleanup> - even the best things end
		3410
		3411	Cleanup watchers are called just before the event loop is being destroyed
		3412	by a call to C<ev_loop_destroy>.
		3413
		3414	While there is no guarantee that the event loop gets destroyed, cleanup
		3415	watchers provide a convenient method to install cleanup hooks for your
		3416	program, worker threads and so on - you just to make sure to destroy the
		3417	loop when you want them to be invoked.
		3418
		3419	Cleanup watchers are invoked in the same way as any other watcher. Unlike
		3420	all other watchers, they do not keep a reference to the event loop (which
		3421	makes a lot of sense if you think about it). Like all other watchers, you
		3422	can call libev functions in the callback, except C<ev_cleanup_start>.
		3423
		3424	=head3 Watcher-Specific Functions and Data Members
		3425
		3426	=over 4
		3427
		3428	=item ev_cleanup_init (ev_cleanup *, callback)
		3429
		3430	Initialises and configures the cleanup watcher - it has no parameters of
		3431	any kind. There is a C<ev_cleanup_set> macro, but using it is utterly
		3432	pointless, I assure you.
		3433
		3434	=back
		3435
		3436	Example: Register an atexit handler to destroy the default loop, so any
		3437	cleanup functions are called.
		3438
		3439	static void
		3440	program_exits (void)
		3441	{
		3442	ev_loop_destroy (EV_DEFAULT_UC);
		3443	}
		3444
		3445	...
		3446	atexit (program_exits);
		3447
		3448
2521	=head2 C<ev_async> - how to wake up another event loop	3449	=head2 C<ev_async> - how to wake up an event loop
2522		3450
2523	In general, you cannot use an C<ev_loop> from multiple threads or other	3451	In general, you cannot use an C<ev_loop> from multiple threads or other
2524	asynchronous sources such as signal handlers (as opposed to multiple event	3452	asynchronous sources such as signal handlers (as opposed to multiple event
2525	loops - those are of course safe to use in different threads).	3453	loops - those are of course safe to use in different threads).
2526		3454
2527	Sometimes, however, you need to wake up another event loop you do not	3455	Sometimes, however, you need to wake up an event loop you do not control,
2528	control, for example because it belongs to another thread. This is what	3456	for example because it belongs to another thread. This is what C<ev_async>
2529	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you	3457	watchers do: as long as the C<ev_async> watcher is active, you can signal
2530	can signal it by calling C<ev_async_send>, which is thread- and signal	3458	it by calling C<ev_async_send>, which is thread- and signal safe.
2531	safe.
2532		3459
2533	This functionality is very similar to C<ev_signal> watchers, as signals,	3460	This functionality is very similar to C<ev_signal> watchers, as signals,
2534	too, are asynchronous in nature, and signals, too, will be compressed	3461	too, are asynchronous in nature, and signals, too, will be compressed
2535	(i.e. the number of callback invocations may be less than the number of	3462	(i.e. the number of callback invocations may be less than the number of
2536	C<ev_async_sent> calls).	3463	C<ev_async_send> calls). In fact, you could use signal watchers as a kind
2537		3464	of "global async watchers" by using a watcher on an otherwise unused
2538	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not	3465	signal, and C<ev_feed_signal> to signal this watcher from another thread,
2539	just the default loop.	3466	even without knowing which loop owns the signal.
2540		3467
2541	=head3 Queueing	3468	=head3 Queueing
2542		3469
2543	C<ev_async> does not support queueing of data in any way. The reason	3470	C<ev_async> does not support queueing of data in any way. The reason
2544	is that the author does not know of a simple (or any) algorithm for a	3471	is that the author does not know of a simple (or any) algorithm for a
2545	multiple-writer-single-reader queue that works in all cases and doesn't	3472	multiple-writer-single-reader queue that works in all cases and doesn't
2546	need elaborate support such as pthreads.	3473	need elaborate support such as pthreads or unportable memory access
		3474	semantics.
2547		3475
2548	That means that if you want to queue data, you have to provide your own	3476	That means that if you want to queue data, you have to provide your own
2549	queue. But at least I can tell you how to implement locking around your	3477	queue. But at least I can tell you how to implement locking around your
2550	queue:	3478	queue:
2551		3479
…		…
2629	=over 4	3557	=over 4
2630		3558
2631	=item ev_async_init (ev_async *, callback)	3559	=item ev_async_init (ev_async *, callback)
2632		3560
2633	Initialises and configures the async watcher - it has no parameters of any	3561	Initialises and configures the async watcher - it has no parameters of any
2634	kind. There is a C<ev_asynd_set> macro, but using it is utterly pointless,	3562	kind. There is a C<ev_async_set> macro, but using it is utterly pointless,
2635	trust me.	3563	trust me.
2636		3564
2637	=item ev_async_send (loop, ev_async *)	3565	=item ev_async_send (loop, ev_async *)
2638		3566
2639	Sends/signals/activates the given C<ev_async> watcher, that is, feeds	3567	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
2640	an C<EV_ASYNC> event on the watcher into the event loop. Unlike	3568	an C<EV_ASYNC> event on the watcher into the event loop, and instantly
		3569	returns.
		3570
2641	C<ev_feed_event>, this call is safe to do from other threads, signal or	3571	Unlike C<ev_feed_event>, this call is safe to do from other threads,
2642	similar contexts (see the discussion of C<EV_ATOMIC_T> in the embedding	3572	signal or similar contexts (see the discussion of C<EV_ATOMIC_T> in the
2643	section below on what exactly this means).	3573	embedding section below on what exactly this means).
2644		3574
2645	This call incurs the overhead of a system call only once per loop iteration,	3575	Note that, as with other watchers in libev, multiple events might get
2646	so while the overhead might be noticeable, it doesn't apply to repeated	3576	compressed into a single callback invocation (another way to look at
2647	calls to C<ev_async_send>.	3577	this is that C<ev_async> watchers are level-triggered: they are set on
		3578	C<ev_async_send>, reset when the event loop detects that).
		3579
		3580	This call incurs the overhead of at most one extra system call per event
		3581	loop iteration, if the event loop is blocked, and no syscall at all if
		3582	the event loop (or your program) is processing events. That means that
		3583	repeated calls are basically free (there is no need to avoid calls for
		3584	performance reasons) and that the overhead becomes smaller (typically
		3585	zero) under load.
2648		3586
2649	=item bool = ev_async_pending (ev_async *)	3587	=item bool = ev_async_pending (ev_async *)
2650		3588
2651	Returns a non-zero value when C<ev_async_send> has been called on the	3589	Returns a non-zero value when C<ev_async_send> has been called on the
2652	watcher but the event has not yet been processed (or even noted) by the	3590	watcher but the event has not yet been processed (or even noted) by the
…		…
2655	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When	3593	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When
2656	the loop iterates next and checks for the watcher to have become active,	3594	the loop iterates next and checks for the watcher to have become active,
2657	it will reset the flag again. C<ev_async_pending> can be used to very	3595	it will reset the flag again. C<ev_async_pending> can be used to very
2658	quickly check whether invoking the loop might be a good idea.	3596	quickly check whether invoking the loop might be a good idea.
2659		3597
2660	Not that this does I<not> check whether the watcher itself is pending, only	3598	Not that this does I<not> check whether the watcher itself is pending,
2661	whether it has been requested to make this watcher pending.	3599	only whether it has been requested to make this watcher pending: there
		3600	is a time window between the event loop checking and resetting the async
		3601	notification, and the callback being invoked.
2662		3602
2663	=back	3603	=back
2664		3604
2665		3605
2666	=head1 OTHER FUNCTIONS	3606	=head1 OTHER FUNCTIONS
2667		3607
2668	There are some other functions of possible interest. Described. Here. Now.	3608	There are some other functions of possible interest. Described. Here. Now.
2669		3609
2670	=over 4	3610	=over 4
2671		3611
2672	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback)	3612	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback, arg)
2673		3613
2674	This function combines a simple timer and an I/O watcher, calls your	3614	This function combines a simple timer and an I/O watcher, calls your
2675	callback on whichever event happens first and automatically stops both	3615	callback on whichever event happens first and automatically stops both
2676	watchers. This is useful if you want to wait for a single event on an fd	3616	watchers. This is useful if you want to wait for a single event on an fd
2677	or timeout without having to allocate/configure/start/stop/free one or	3617	or timeout without having to allocate/configure/start/stop/free one or
…		…
2683		3623
2684	If C<timeout> is less than 0, then no timeout watcher will be	3624	If C<timeout> is less than 0, then no timeout watcher will be
2685	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and	3625	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
2686	repeat = 0) will be started. C<0> is a valid timeout.	3626	repeat = 0) will be started. C<0> is a valid timeout.
2687		3627
2688	The callback has the type C<void (*cb)(int revents, void *arg)> and gets	3628	The callback has the type C<void (*cb)(int revents, void *arg)> and is
2689	passed an C<revents> set like normal event callbacks (a combination of	3629	passed an C<revents> set like normal event callbacks (a combination of
2690	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>	3630	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMER>) and the C<arg>
2691	value passed to C<ev_once>. Note that it is possible to receive I<both>	3631	value passed to C<ev_once>. Note that it is possible to receive I<both>
2692	a timeout and an io event at the same time - you probably should give io	3632	a timeout and an io event at the same time - you probably should give io
2693	events precedence.	3633	events precedence.
2694		3634
2695	Example: wait up to ten seconds for data to appear on STDIN_FILENO.	3635	Example: wait up to ten seconds for data to appear on STDIN_FILENO.
2696		3636
2697	static void stdin_ready (int revents, void *arg)	3637	static void stdin_ready (int revents, void *arg)
2698	{	3638	{
2699	if (revents & EV_READ)	3639	if (revents & EV_READ)
2700	/* stdin might have data for us, joy! */;	3640	/* stdin might have data for us, joy! */;
2701	else if (revents & EV_TIMEOUT)	3641	else if (revents & EV_TIMER)
2702	/* doh, nothing entered */;	3642	/* doh, nothing entered */;
2703	}	3643	}
2704		3644
2705	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	3645	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
2706		3646
2707	=item ev_feed_event (struct ev_loop *, watcher *, int revents)
2708
2709	Feeds the given event set into the event loop, as if the specified event
2710	had happened for the specified watcher (which must be a pointer to an
2711	initialised but not necessarily started event watcher).
2712
2713	=item ev_feed_fd_event (struct ev_loop *, int fd, int revents)	3647	=item ev_feed_fd_event (loop, int fd, int revents)
2714		3648
2715	Feed an event on the given fd, as if a file descriptor backend detected	3649	Feed an event on the given fd, as if a file descriptor backend detected
2716	the given events it.	3650	the given events.
2717		3651
2718	=item ev_feed_signal_event (struct ev_loop *loop, int signum)	3652	=item ev_feed_signal_event (loop, int signum)
2719		3653
2720	Feed an event as if the given signal occurred (C<loop> must be the default	3654	Feed an event as if the given signal occurred. See also C<ev_feed_signal>,
2721	loop!).	3655	which is async-safe.
2722		3656
2723	=back	3657	=back
		3658
		3659
		3660	=head1 COMMON OR USEFUL IDIOMS (OR BOTH)
		3661
		3662	This section explains some common idioms that are not immediately
		3663	obvious. Note that examples are sprinkled over the whole manual, and this
		3664	section only contains stuff that wouldn't fit anywhere else.
		3665
		3666	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
		3667
		3668	Each watcher has, by default, a C<void *data> member that you can read
		3669	or modify at any time: libev will completely ignore it. This can be used
		3670	to associate arbitrary data with your watcher. If you need more data and
		3671	don't want to allocate memory separately and store a pointer to it in that
		3672	data member, you can also "subclass" the watcher type and provide your own
		3673	data:
		3674
		3675	struct my_io
		3676	{
		3677	ev_io io;
		3678	int otherfd;
		3679	void *somedata;
		3680	struct whatever *mostinteresting;
		3681	};
		3682
		3683	...
		3684	struct my_io w;
		3685	ev_io_init (&w.io, my_cb, fd, EV_READ);
		3686
		3687	And since your callback will be called with a pointer to the watcher, you
		3688	can cast it back to your own type:
		3689
		3690	static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)
		3691	{
		3692	struct my_io *w = (struct my_io *)w_;
		3693	...
		3694	}
		3695
		3696	More interesting and less C-conformant ways of casting your callback
		3697	function type instead have been omitted.
		3698
		3699	=head2 BUILDING YOUR OWN COMPOSITE WATCHERS
		3700
		3701	Another common scenario is to use some data structure with multiple
		3702	embedded watchers, in effect creating your own watcher that combines
		3703	multiple libev event sources into one "super-watcher":
		3704
		3705	struct my_biggy
		3706	{
		3707	int some_data;
		3708	ev_timer t1;
		3709	ev_timer t2;
		3710	}
		3711
		3712	In this case getting the pointer to C<my_biggy> is a bit more
		3713	complicated: Either you store the address of your C<my_biggy> struct in
		3714	the C<data> member of the watcher (for woozies or C++ coders), or you need
		3715	to use some pointer arithmetic using C<offsetof> inside your watchers (for
		3716	real programmers):
		3717
		3718	#include <stddef.h>
		3719
		3720	static void
		3721	t1_cb (EV_P_ ev_timer *w, int revents)
		3722	{
		3723	struct my_biggy big = (struct my_biggy *)
		3724	(((char *)w) - offsetof (struct my_biggy, t1));
		3725	}
		3726
		3727	static void
		3728	t2_cb (EV_P_ ev_timer *w, int revents)
		3729	{
		3730	struct my_biggy big = (struct my_biggy *)
		3731	(((char *)w) - offsetof (struct my_biggy, t2));
		3732	}
		3733
		3734	=head2 AVOIDING FINISHING BEFORE RETURNING
		3735
		3736	Often you have structures like this in event-based programs:
		3737
		3738	callback ()
		3739	{
		3740	free (request);
		3741	}
		3742
		3743	request = start_new_request (..., callback);
		3744
		3745	The intent is to start some "lengthy" operation. The C<request> could be
		3746	used to cancel the operation, or do other things with it.
		3747
		3748	It's not uncommon to have code paths in C<start_new_request> that
		3749	immediately invoke the callback, for example, to report errors. Or you add
		3750	some caching layer that finds that it can skip the lengthy aspects of the
		3751	operation and simply invoke the callback with the result.
		3752
		3753	The problem here is that this will happen I<before> C<start_new_request>
		3754	has returned, so C<request> is not set.
		3755
		3756	Even if you pass the request by some safer means to the callback, you
		3757	might want to do something to the request after starting it, such as
		3758	canceling it, which probably isn't working so well when the callback has
		3759	already been invoked.
		3760
		3761	A common way around all these issues is to make sure that
		3762	C<start_new_request> I<always> returns before the callback is invoked. If
		3763	C<start_new_request> immediately knows the result, it can artificially
		3764	delay invoking the callback by using a C<prepare> or C<idle> watcher for
		3765	example, or more sneakily, by reusing an existing (stopped) watcher and
		3766	pushing it into the pending queue:
		3767
		3768	ev_set_cb (watcher, callback);
		3769	ev_feed_event (EV_A_ watcher, 0);
		3770
		3771	This way, C<start_new_request> can safely return before the callback is
		3772	invoked, while not delaying callback invocation too much.
		3773
		3774	=head2 MODEL/NESTED EVENT LOOP INVOCATIONS AND EXIT CONDITIONS
		3775
		3776	Often (especially in GUI toolkits) there are places where you have
		3777	I<modal> interaction, which is most easily implemented by recursively
		3778	invoking C<ev_run>.
		3779
		3780	This brings the problem of exiting - a callback might want to finish the
		3781	main C<ev_run> call, but not the nested one (e.g. user clicked "Quit", but
		3782	a modal "Are you sure?" dialog is still waiting), or just the nested one
		3783	and not the main one (e.g. user clocked "Ok" in a modal dialog), or some
		3784	other combination: In these cases, a simple C<ev_break> will not work.
		3785
		3786	The solution is to maintain "break this loop" variable for each C<ev_run>
		3787	invocation, and use a loop around C<ev_run> until the condition is
		3788	triggered, using C<EVRUN_ONCE>:
		3789
		3790	// main loop
		3791	int exit_main_loop = 0;
		3792
		3793	while (!exit_main_loop)
		3794	ev_run (EV_DEFAULT_ EVRUN_ONCE);
		3795
		3796	// in a modal watcher
		3797	int exit_nested_loop = 0;
		3798
		3799	while (!exit_nested_loop)
		3800	ev_run (EV_A_ EVRUN_ONCE);
		3801
		3802	To exit from any of these loops, just set the corresponding exit variable:
		3803
		3804	// exit modal loop
		3805	exit_nested_loop = 1;
		3806
		3807	// exit main program, after modal loop is finished
		3808	exit_main_loop = 1;
		3809
		3810	// exit both
		3811	exit_main_loop = exit_nested_loop = 1;
		3812
		3813	=head2 THREAD LOCKING EXAMPLE
		3814
		3815	Here is a fictitious example of how to run an event loop in a different
		3816	thread from where callbacks are being invoked and watchers are
		3817	created/added/removed.
		3818
		3819	For a real-world example, see the C<EV::Loop::Async> perl module,
		3820	which uses exactly this technique (which is suited for many high-level
		3821	languages).
		3822
		3823	The example uses a pthread mutex to protect the loop data, a condition
		3824	variable to wait for callback invocations, an async watcher to notify the
		3825	event loop thread and an unspecified mechanism to wake up the main thread.
		3826
		3827	First, you need to associate some data with the event loop:
		3828
		3829	typedef struct {
		3830	mutex_t lock; /* global loop lock */
		3831	ev_async async_w;
		3832	thread_t tid;
		3833	cond_t invoke_cv;
		3834	} userdata;
		3835
		3836	void prepare_loop (EV_P)
		3837	{
		3838	// for simplicity, we use a static userdata struct.
		3839	static userdata u;
		3840
		3841	ev_async_init (&u->async_w, async_cb);
		3842	ev_async_start (EV_A_ &u->async_w);
		3843
		3844	pthread_mutex_init (&u->lock, 0);
		3845	pthread_cond_init (&u->invoke_cv, 0);
		3846
		3847	// now associate this with the loop
		3848	ev_set_userdata (EV_A_ u);
		3849	ev_set_invoke_pending_cb (EV_A_ l_invoke);
		3850	ev_set_loop_release_cb (EV_A_ l_release, l_acquire);
		3851
		3852	// then create the thread running ev_run
		3853	pthread_create (&u->tid, 0, l_run, EV_A);
		3854	}
		3855
		3856	The callback for the C<ev_async> watcher does nothing: the watcher is used
		3857	solely to wake up the event loop so it takes notice of any new watchers
		3858	that might have been added:
		3859
		3860	static void
		3861	async_cb (EV_P_ ev_async *w, int revents)
		3862	{
		3863	// just used for the side effects
		3864	}
		3865
		3866	The C<l_release> and C<l_acquire> callbacks simply unlock/lock the mutex
		3867	protecting the loop data, respectively.
		3868
		3869	static void
		3870	l_release (EV_P)
		3871	{
		3872	userdata *u = ev_userdata (EV_A);
		3873	pthread_mutex_unlock (&u->lock);
		3874	}
		3875
		3876	static void
		3877	l_acquire (EV_P)
		3878	{
		3879	userdata *u = ev_userdata (EV_A);
		3880	pthread_mutex_lock (&u->lock);
		3881	}
		3882
		3883	The event loop thread first acquires the mutex, and then jumps straight
		3884	into C<ev_run>:
		3885
		3886	void *
		3887	l_run (void *thr_arg)
		3888	{
		3889	struct ev_loop *loop = (struct ev_loop *)thr_arg;
		3890
		3891	l_acquire (EV_A);
		3892	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
		3893	ev_run (EV_A_ 0);
		3894	l_release (EV_A);
		3895
		3896	return 0;
		3897	}
		3898
		3899	Instead of invoking all pending watchers, the C<l_invoke> callback will
		3900	signal the main thread via some unspecified mechanism (signals? pipe
		3901	writes? C<Async::Interrupt>?) and then waits until all pending watchers
		3902	have been called (in a while loop because a) spurious wakeups are possible
		3903	and b) skipping inter-thread-communication when there are no pending
		3904	watchers is very beneficial):
		3905
		3906	static void
		3907	l_invoke (EV_P)
		3908	{
		3909	userdata *u = ev_userdata (EV_A);
		3910
		3911	while (ev_pending_count (EV_A))
		3912	{
		3913	wake_up_other_thread_in_some_magic_or_not_so_magic_way ();
		3914	pthread_cond_wait (&u->invoke_cv, &u->lock);
		3915	}
		3916	}
		3917
		3918	Now, whenever the main thread gets told to invoke pending watchers, it
		3919	will grab the lock, call C<ev_invoke_pending> and then signal the loop
		3920	thread to continue:
		3921
		3922	static void
		3923	real_invoke_pending (EV_P)
		3924	{
		3925	userdata *u = ev_userdata (EV_A);
		3926
		3927	pthread_mutex_lock (&u->lock);
		3928	ev_invoke_pending (EV_A);
		3929	pthread_cond_signal (&u->invoke_cv);
		3930	pthread_mutex_unlock (&u->lock);
		3931	}
		3932
		3933	Whenever you want to start/stop a watcher or do other modifications to an
		3934	event loop, you will now have to lock:
		3935
		3936	ev_timer timeout_watcher;
		3937	userdata *u = ev_userdata (EV_A);
		3938
		3939	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
		3940
		3941	pthread_mutex_lock (&u->lock);
		3942	ev_timer_start (EV_A_ &timeout_watcher);
		3943	ev_async_send (EV_A_ &u->async_w);
		3944	pthread_mutex_unlock (&u->lock);
		3945
		3946	Note that sending the C<ev_async> watcher is required because otherwise
		3947	an event loop currently blocking in the kernel will have no knowledge
		3948	about the newly added timer. By waking up the loop it will pick up any new
		3949	watchers in the next event loop iteration.
		3950
		3951	=head2 THREADS, COROUTINES, CONTINUATIONS, QUEUES... INSTEAD OF CALLBACKS
		3952
		3953	While the overhead of a callback that e.g. schedules a thread is small, it
		3954	is still an overhead. If you embed libev, and your main usage is with some
		3955	kind of threads or coroutines, you might want to customise libev so that
		3956	doesn't need callbacks anymore.
		3957
		3958	Imagine you have coroutines that you can switch to using a function
		3959	C<switch_to (coro)>, that libev runs in a coroutine called C<libev_coro>
		3960	and that due to some magic, the currently active coroutine is stored in a
		3961	global called C<current_coro>. Then you can build your own "wait for libev
		3962	event" primitive by changing C<EV_CB_DECLARE> and C<EV_CB_INVOKE> (note
		3963	the differing C<;> conventions):
		3964
		3965	#define EV_CB_DECLARE(type) struct my_coro *cb;
		3966	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)
		3967
		3968	That means instead of having a C callback function, you store the
		3969	coroutine to switch to in each watcher, and instead of having libev call
		3970	your callback, you instead have it switch to that coroutine.
		3971
		3972	A coroutine might now wait for an event with a function called
		3973	C<wait_for_event>. (the watcher needs to be started, as always, but it doesn't
		3974	matter when, or whether the watcher is active or not when this function is
		3975	called):
		3976
		3977	void
		3978	wait_for_event (ev_watcher *w)
		3979	{
		3980	ev_set_cb (w, current_coro);
		3981	switch_to (libev_coro);
		3982	}
		3983
		3984	That basically suspends the coroutine inside C<wait_for_event> and
		3985	continues the libev coroutine, which, when appropriate, switches back to
		3986	this or any other coroutine.
		3987
		3988	You can do similar tricks if you have, say, threads with an event queue -
		3989	instead of storing a coroutine, you store the queue object and instead of
		3990	switching to a coroutine, you push the watcher onto the queue and notify
		3991	any waiters.
		3992
		3993	To embed libev, see L</EMBEDDING>, but in short, it's easiest to create two
		3994	files, F<my_ev.h> and F<my_ev.c> that include the respective libev files:
		3995
		3996	// my_ev.h
		3997	#define EV_CB_DECLARE(type) struct my_coro *cb;
		3998	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)
		3999	#include "../libev/ev.h"
		4000
		4001	// my_ev.c
		4002	#define EV_H "my_ev.h"
		4003	#include "../libev/ev.c"
		4004
		4005	And then use F<my_ev.h> when you would normally use F<ev.h>, and compile
		4006	F<my_ev.c> into your project. When properly specifying include paths, you
		4007	can even use F<ev.h> as header file name directly.
2724		4008
2725		4009
2726	=head1 LIBEVENT EMULATION	4010	=head1 LIBEVENT EMULATION
2727		4011
2728	Libev offers a compatibility emulation layer for libevent. It cannot	4012	Libev offers a compatibility emulation layer for libevent. It cannot
2729	emulate the internals of libevent, so here are some usage hints:	4013	emulate the internals of libevent, so here are some usage hints:
2730		4014
2731	=over 4	4015	=over 4
		4016
		4017	=item * Only the libevent-1.4.1-beta API is being emulated.
		4018
		4019	This was the newest libevent version available when libev was implemented,
		4020	and is still mostly unchanged in 2010.
2732		4021
2733	=item * Use it by including <event.h>, as usual.	4022	=item * Use it by including <event.h>, as usual.
2734		4023
2735	=item * The following members are fully supported: ev_base, ev_callback,	4024	=item * The following members are fully supported: ev_base, ev_callback,
2736	ev_arg, ev_fd, ev_res, ev_events.	4025	ev_arg, ev_fd, ev_res, ev_events.
…		…
2742	=item * Priorities are not currently supported. Initialising priorities	4031	=item * Priorities are not currently supported. Initialising priorities
2743	will fail and all watchers will have the same priority, even though there	4032	will fail and all watchers will have the same priority, even though there
2744	is an ev_pri field.	4033	is an ev_pri field.
2745		4034
2746	=item * In libevent, the last base created gets the signals, in libev, the	4035	=item * In libevent, the last base created gets the signals, in libev, the
2747	first base created (== the default loop) gets the signals.	4036	base that registered the signal gets the signals.
2748		4037
2749	=item * Other members are not supported.	4038	=item * Other members are not supported.
2750		4039
2751	=item * The libev emulation is I<not> ABI compatible to libevent, you need	4040	=item * The libev emulation is I<not> ABI compatible to libevent, you need
2752	to use the libev header file and library.	4041	to use the libev header file and library.
2753		4042
2754	=back	4043	=back
2755		4044
2756	=head1 C++ SUPPORT	4045	=head1 C++ SUPPORT
		4046
		4047	=head2 C API
		4048
		4049	The normal C API should work fine when used from C++: both ev.h and the
		4050	libev sources can be compiled as C++. Therefore, code that uses the C API
		4051	will work fine.
		4052
		4053	Proper exception specifications might have to be added to callbacks passed
		4054	to libev: exceptions may be thrown only from watcher callbacks, all other
		4055	callbacks (allocator, syserr, loop acquire/release and periodic reschedule
		4056	callbacks) must not throw exceptions, and might need a C<noexcept>
		4057	specification. If you have code that needs to be compiled as both C and
		4058	C++ you can use the C<EV_NOEXCEPT> macro for this:
		4059
		4060	static void
		4061	fatal_error (const char *msg) EV_NOEXCEPT
		4062	{
		4063	perror (msg);
		4064	abort ();
		4065	}
		4066
		4067	...
		4068	ev_set_syserr_cb (fatal_error);
		4069
		4070	The only API functions that can currently throw exceptions are C<ev_run>,
		4071	C<ev_invoke>, C<ev_invoke_pending> and C<ev_loop_destroy> (the latter
		4072	because it runs cleanup watchers).
		4073
		4074	Throwing exceptions in watcher callbacks is only supported if libev itself
		4075	is compiled with a C++ compiler or your C and C++ environments allow
		4076	throwing exceptions through C libraries (most do).
		4077
		4078	=head2 C++ API
2757		4079
2758	Libev comes with some simplistic wrapper classes for C++ that mainly allow	4080	Libev comes with some simplistic wrapper classes for C++ that mainly allow
2759	you to use some convenience methods to start/stop watchers and also change	4081	you to use some convenience methods to start/stop watchers and also change
2760	the callback model to a model using method callbacks on objects.	4082	the callback model to a model using method callbacks on objects.
2761		4083
2762	To use it,	4084	To use it,
2763		4085
2764	#include <ev++.h>	4086	#include <ev++.h>
2765		4087
2766	This automatically includes F<ev.h> and puts all of its definitions (many	4088	This automatically includes F<ev.h> and puts all of its definitions (many
2767	of them macros) into the global namespace. All C++ specific things are	4089	of them macros) into the global namespace. All C++ specific things are
2768	put into the C<ev> namespace. It should support all the same embedding	4090	put into the C<ev> namespace. It should support all the same embedding
…		…
2771	Care has been taken to keep the overhead low. The only data member the C++	4093	Care has been taken to keep the overhead low. The only data member the C++
2772	classes add (compared to plain C-style watchers) is the event loop pointer	4094	classes add (compared to plain C-style watchers) is the event loop pointer
2773	that the watcher is associated with (or no additional members at all if	4095	that the watcher is associated with (or no additional members at all if
2774	you disable C<EV_MULTIPLICITY> when embedding libev).	4096	you disable C<EV_MULTIPLICITY> when embedding libev).
2775		4097
2776	Currently, functions, and static and non-static member functions can be	4098	Currently, functions, static and non-static member functions and classes
2777	used as callbacks. Other types should be easy to add as long as they only	4099	with C<operator ()> can be used as callbacks. Other types should be easy
2778	need one additional pointer for context. If you need support for other	4100	to add as long as they only need one additional pointer for context. If
2779	types of functors please contact the author (preferably after implementing	4101	you need support for other types of functors please contact the author
2780	it).	4102	(preferably after implementing it).
		4103
		4104	For all this to work, your C++ compiler either has to use the same calling
		4105	conventions as your C compiler (for static member functions), or you have
		4106	to embed libev and compile libev itself as C++.
2781		4107
2782	Here is a list of things available in the C<ev> namespace:	4108	Here is a list of things available in the C<ev> namespace:
2783		4109
2784	=over 4	4110	=over 4
2785		4111
…		…
2795	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.	4121	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.
2796		4122
2797	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of	4123	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of
2798	the same name in the C<ev> namespace, with the exception of C<ev_signal>	4124	the same name in the C<ev> namespace, with the exception of C<ev_signal>
2799	which is called C<ev::sig> to avoid clashes with the C<signal> macro	4125	which is called C<ev::sig> to avoid clashes with the C<signal> macro
2800	defines by many implementations.	4126	defined by many implementations.
2801		4127
2802	All of those classes have these methods:	4128	All of those classes have these methods:
2803		4129
2804	=over 4	4130	=over 4
2805		4131
2806	=item ev::TYPE::TYPE ()	4132	=item ev::TYPE::TYPE ()
2807		4133
2808	=item ev::TYPE::TYPE (struct ev_loop *)	4134	=item ev::TYPE::TYPE (loop)
2809		4135
2810	=item ev::TYPE::~TYPE	4136	=item ev::TYPE::~TYPE
2811		4137
2812	The constructor (optionally) takes an event loop to associate the watcher	4138	The constructor (optionally) takes an event loop to associate the watcher
2813	with. If it is omitted, it will use C<EV_DEFAULT>.	4139	with. If it is omitted, it will use C<EV_DEFAULT>.
…		…
2845		4171
2846	myclass obj;	4172	myclass obj;
2847	ev::io iow;	4173	ev::io iow;
2848	iow.set <myclass, &myclass::io_cb> (&obj);	4174	iow.set <myclass, &myclass::io_cb> (&obj);
2849		4175
		4176	=item w->set (object *)
		4177
		4178	This is a variation of a method callback - leaving out the method to call
		4179	will default the method to C<operator ()>, which makes it possible to use
		4180	functor objects without having to manually specify the C<operator ()> all
		4181	the time. Incidentally, you can then also leave out the template argument
		4182	list.
		4183
		4184	The C<operator ()> method prototype must be C<void operator ()(watcher &w,
		4185	int revents)>.
		4186
		4187	See the method-C<set> above for more details.
		4188
		4189	Example: use a functor object as callback.
		4190
		4191	struct myfunctor
		4192	{
		4193	void operator() (ev::io &w, int revents)
		4194	{
		4195	...
		4196	}
		4197	}
		4198
		4199	myfunctor f;
		4200
		4201	ev::io w;
		4202	w.set (&f);
		4203
2850	=item w->set<function> (void *data = 0)	4204	=item w->set<function> (void *data = 0)
2851		4205
2852	Also sets a callback, but uses a static method or plain function as	4206	Also sets a callback, but uses a static method or plain function as
2853	callback. The optional C<data> argument will be stored in the watcher's	4207	callback. The optional C<data> argument will be stored in the watcher's
2854	C<data> member and is free for you to use.	4208	C<data> member and is free for you to use.
…		…
2860	Example: Use a plain function as callback.	4214	Example: Use a plain function as callback.
2861		4215
2862	static void io_cb (ev::io &w, int revents) { }	4216	static void io_cb (ev::io &w, int revents) { }
2863	iow.set <io_cb> ();	4217	iow.set <io_cb> ();
2864		4218
2865	=item w->set (struct ev_loop *)	4219	=item w->set (loop)
2866		4220
2867	Associates a different C<struct ev_loop> with this watcher. You can only	4221	Associates a different C<struct ev_loop> with this watcher. You can only
2868	do this when the watcher is inactive (and not pending either).	4222	do this when the watcher is inactive (and not pending either).
2869		4223
2870	=item w->set ([arguments])	4224	=item w->set ([arguments])
2871		4225
2872	Basically the same as C<ev_TYPE_set>, with the same arguments. Must be	4226	Basically the same as C<ev_TYPE_set> (except for C<ev::embed> watchers>),
		4227	with the same arguments. Either this method or a suitable start method
2873	called at least once. Unlike the C counterpart, an active watcher gets	4228	must be called at least once. Unlike the C counterpart, an active watcher
2874	automatically stopped and restarted when reconfiguring it with this	4229	gets automatically stopped and restarted when reconfiguring it with this
2875	method.	4230	method.
		4231
		4232	For C<ev::embed> watchers this method is called C<set_embed>, to avoid
		4233	clashing with the C<set (loop)> method.
2876		4234
2877	=item w->start ()	4235	=item w->start ()
2878		4236
2879	Starts the watcher. Note that there is no C<loop> argument, as the	4237	Starts the watcher. Note that there is no C<loop> argument, as the
2880	constructor already stores the event loop.	4238	constructor already stores the event loop.
2881		4239
		4240	=item w->start ([arguments])
		4241
		4242	Instead of calling C<set> and C<start> methods separately, it is often
		4243	convenient to wrap them in one call. Uses the same type of arguments as
		4244	the configure C<set> method of the watcher.
		4245
2882	=item w->stop ()	4246	=item w->stop ()
2883		4247
2884	Stops the watcher if it is active. Again, no C<loop> argument.	4248	Stops the watcher if it is active. Again, no C<loop> argument.
2885		4249
2886	=item w->again () (C<ev::timer>, C<ev::periodic> only)	4250	=item w->again () (C<ev::timer>, C<ev::periodic> only)
…		…
2898		4262
2899	=back	4263	=back
2900		4264
2901	=back	4265	=back
2902		4266
2903	Example: Define a class with an IO and idle watcher, start one of them in	4267	Example: Define a class with two I/O and idle watchers, start the I/O
2904	the constructor.	4268	watchers in the constructor.
2905		4269
2906	class myclass	4270	class myclass
2907	{	4271	{
2908	ev::io io ; void io_cb (ev::io &w, int revents);	4272	ev::io io ; void io_cb (ev::io &w, int revents);
		4273	ev::io io2 ; void io2_cb (ev::io &w, int revents);
2909	ev::idle idle; void idle_cb (ev::idle &w, int revents);	4274	ev::idle idle; void idle_cb (ev::idle &w, int revents);
2910		4275
2911	myclass (int fd)	4276	myclass (int fd)
2912	{	4277	{
2913	io .set <myclass, &myclass::io_cb > (this);	4278	io .set <myclass, &myclass::io_cb > (this);
		4279	io2 .set <myclass, &myclass::io2_cb > (this);
2914	idle.set <myclass, &myclass::idle_cb> (this);	4280	idle.set <myclass, &myclass::idle_cb> (this);
2915		4281
2916	io.start (fd, ev::READ);	4282	io.set (fd, ev::WRITE); // configure the watcher
		4283	io.start (); // start it whenever convenient
		4284
		4285	io2.start (fd, ev::READ); // set + start in one call
2917	}	4286	}
2918	};	4287	};
2919		4288
2920		4289
2921	=head1 OTHER LANGUAGE BINDINGS	4290	=head1 OTHER LANGUAGE BINDINGS
…		…
2940	L<http://software.schmorp.de/pkg/EV>.	4309	L<http://software.schmorp.de/pkg/EV>.
2941		4310
2942	=item Python	4311	=item Python
2943		4312
2944	Python bindings can be found at L<http://code.google.com/p/pyev/>. It	4313	Python bindings can be found at L<http://code.google.com/p/pyev/>. It
2945	seems to be quite complete and well-documented. Note, however, that the	4314	seems to be quite complete and well-documented.
2946	patch they require for libev is outright dangerous as it breaks the ABI
2947	for everybody else, and therefore, should never be applied in an installed
2948	libev (if python requires an incompatible ABI then it needs to embed
2949	libev).
2950		4315
2951	=item Ruby	4316	=item Ruby
2952		4317
2953	Tony Arcieri has written a ruby extension that offers access to a subset	4318	Tony Arcieri has written a ruby extension that offers access to a subset
2954	of the libev API and adds file handle abstractions, asynchronous DNS and	4319	of the libev API and adds file handle abstractions, asynchronous DNS and
2955	more on top of it. It can be found via gem servers. Its homepage is at	4320	more on top of it. It can be found via gem servers. Its homepage is at
2956	L<http://rev.rubyforge.org/>.	4321	L<http://rev.rubyforge.org/>.
2957		4322
		4323	Roger Pack reports that using the link order C<-lws2_32 -lmsvcrt-ruby-190>
		4324	makes rev work even on mingw.
		4325
		4326	=item Haskell
		4327
		4328	A haskell binding to libev is available at
		4329	L<http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hlibev>.
		4330
2958	=item D	4331	=item D
2959		4332
2960	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to	4333	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
2961	be found at L<http://proj.llucax.com.ar/wiki/evd>.	4334	be found at L<http://www.llucax.com.ar/proj/ev.d/index.html>.
2962		4335
2963	=item Ocaml	4336	=item Ocaml
2964		4337
2965	Erkki Seppala has written Ocaml bindings for libev, to be found at	4338	Erkki Seppala has written Ocaml bindings for libev, to be found at
2966	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.	4339	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.
		4340
		4341	=item Lua
		4342
		4343	Brian Maher has written a partial interface to libev for lua (at the
		4344	time of this writing, only C<ev_io> and C<ev_timer>), to be found at
		4345	L<http://github.com/brimworks/lua-ev>.
		4346
		4347	=item Javascript
		4348
		4349	Node.js (L<http://nodejs.org>) uses libev as the underlying event library.
		4350
		4351	=item Others
		4352
		4353	There are others, and I stopped counting.
2967		4354
2968	=back	4355	=back
2969		4356
2970		4357
2971	=head1 MACRO MAGIC	4358	=head1 MACRO MAGIC
…		…
2985	loop argument"). The C<EV_A> form is used when this is the sole argument,	4372	loop argument"). The C<EV_A> form is used when this is the sole argument,
2986	C<EV_A_> is used when other arguments are following. Example:	4373	C<EV_A_> is used when other arguments are following. Example:
2987		4374
2988	ev_unref (EV_A);	4375	ev_unref (EV_A);
2989	ev_timer_add (EV_A_ watcher);	4376	ev_timer_add (EV_A_ watcher);
2990	ev_loop (EV_A_ 0);	4377	ev_run (EV_A_ 0);
2991		4378
2992	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,	4379	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
2993	which is often provided by the following macro.	4380	which is often provided by the following macro.
2994		4381
2995	=item C<EV_P>, C<EV_P_>	4382	=item C<EV_P>, C<EV_P_>
…		…
3008	suitable for use with C<EV_A>.	4395	suitable for use with C<EV_A>.
3009		4396
3010	=item C<EV_DEFAULT>, C<EV_DEFAULT_>	4397	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
3011		4398
3012	Similar to the other two macros, this gives you the value of the default	4399	Similar to the other two macros, this gives you the value of the default
3013	loop, if multiple loops are supported ("ev loop default").	4400	loop, if multiple loops are supported ("ev loop default"). The default loop
		4401	will be initialised if it isn't already initialised.
		4402
		4403	For non-multiplicity builds, these macros do nothing, so you always have
		4404	to initialise the loop somewhere.
3014		4405
3015	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>	4406	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
3016		4407
3017	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the	4408	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
3018	default loop has been initialised (C<UC> == unchecked). Their behaviour	4409	default loop has been initialised (C<UC> == unchecked). Their behaviour
…		…
3035	}	4426	}
3036		4427
3037	ev_check check;	4428	ev_check check;
3038	ev_check_init (&check, check_cb);	4429	ev_check_init (&check, check_cb);
3039	ev_check_start (EV_DEFAULT_ &check);	4430	ev_check_start (EV_DEFAULT_ &check);
3040	ev_loop (EV_DEFAULT_ 0);	4431	ev_run (EV_DEFAULT_ 0);
3041		4432
3042	=head1 EMBEDDING	4433	=head1 EMBEDDING
3043		4434
3044	Libev can (and often is) directly embedded into host	4435	Libev can (and often is) directly embedded into host
3045	applications. Examples of applications that embed it include the Deliantra	4436	applications. Examples of applications that embed it include the Deliantra
…		…
3072		4463
3073	#define EV_STANDALONE 1	4464	#define EV_STANDALONE 1
3074	#include "ev.h"	4465	#include "ev.h"
3075		4466
3076	Both header files and implementation files can be compiled with a C++	4467	Both header files and implementation files can be compiled with a C++
3077	compiler (at least, thats a stated goal, and breakage will be treated	4468	compiler (at least, that's a stated goal, and breakage will be treated
3078	as a bug).	4469	as a bug).
3079		4470
3080	You need the following files in your source tree, or in a directory	4471	You need the following files in your source tree, or in a directory
3081	in your include path (e.g. in libev/ when using -Ilibev):	4472	in your include path (e.g. in libev/ when using -Ilibev):
3082		4473
…		…
3085	ev_vars.h	4476	ev_vars.h
3086	ev_wrap.h	4477	ev_wrap.h
3087		4478
3088	ev_win32.c required on win32 platforms only	4479	ev_win32.c required on win32 platforms only
3089		4480
3090	ev_select.c only when select backend is enabled (which is enabled by default)	4481	ev_select.c only when select backend is enabled
3091	ev_poll.c only when poll backend is enabled (disabled by default)	4482	ev_poll.c only when poll backend is enabled
3092	ev_epoll.c only when the epoll backend is enabled (disabled by default)	4483	ev_epoll.c only when the epoll backend is enabled
		4484	ev_linuxaio.c only when the linux aio backend is enabled
3093	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)	4485	ev_kqueue.c only when the kqueue backend is enabled
3094	ev_port.c only when the solaris port backend is enabled (disabled by default)	4486	ev_port.c only when the solaris port backend is enabled
3095		4487
3096	F<ev.c> includes the backend files directly when enabled, so you only need	4488	F<ev.c> includes the backend files directly when enabled, so you only need
3097	to compile this single file.	4489	to compile this single file.
3098		4490
3099	=head3 LIBEVENT COMPATIBILITY API	4491	=head3 LIBEVENT COMPATIBILITY API
…		…
3125	libev.m4	4517	libev.m4
3126		4518
3127	=head2 PREPROCESSOR SYMBOLS/MACROS	4519	=head2 PREPROCESSOR SYMBOLS/MACROS
3128		4520
3129	Libev can be configured via a variety of preprocessor symbols you have to	4521	Libev can be configured via a variety of preprocessor symbols you have to
3130	define before including any of its files. The default in the absence of	4522	define before including (or compiling) any of its files. The default in
3131	autoconf is documented for every option.	4523	the absence of autoconf is documented for every option.
		4524
		4525	Symbols marked with "(h)" do not change the ABI, and can have different
		4526	values when compiling libev vs. including F<ev.h>, so it is permissible
		4527	to redefine them before including F<ev.h> without breaking compatibility
		4528	to a compiled library. All other symbols change the ABI, which means all
		4529	users of libev and the libev code itself must be compiled with compatible
		4530	settings.
3132		4531
3133	=over 4	4532	=over 4
3134		4533
		4534	=item EV_COMPAT3 (h)
		4535
		4536	Backwards compatibility is a major concern for libev. This is why this
		4537	release of libev comes with wrappers for the functions and symbols that
		4538	have been renamed between libev version 3 and 4.
		4539
		4540	You can disable these wrappers (to test compatibility with future
		4541	versions) by defining C<EV_COMPAT3> to C<0> when compiling your
		4542	sources. This has the additional advantage that you can drop the C<struct>
		4543	from C<struct ev_loop> declarations, as libev will provide an C<ev_loop>
		4544	typedef in that case.
		4545
		4546	In some future version, the default for C<EV_COMPAT3> will become C<0>,
		4547	and in some even more future version the compatibility code will be
		4548	removed completely.
		4549
3135	=item EV_STANDALONE	4550	=item EV_STANDALONE (h)
3136		4551
3137	Must always be C<1> if you do not use autoconf configuration, which	4552	Must always be C<1> if you do not use autoconf configuration, which
3138	keeps libev from including F<config.h>, and it also defines dummy	4553	keeps libev from including F<config.h>, and it also defines dummy
3139	implementations for some libevent functions (such as logging, which is not	4554	implementations for some libevent functions (such as logging, which is not
3140	supported). It will also not define any of the structs usually found in	4555	supported). It will also not define any of the structs usually found in
3141	F<event.h> that are not directly supported by the libev core alone.	4556	F<event.h> that are not directly supported by the libev core alone.
3142		4557
		4558	In standalone mode, libev will still try to automatically deduce the
		4559	configuration, but has to be more conservative.
		4560
		4561	=item EV_USE_FLOOR
		4562
		4563	If defined to be C<1>, libev will use the C<floor ()> function for its
		4564	periodic reschedule calculations, otherwise libev will fall back on a
		4565	portable (slower) implementation. If you enable this, you usually have to
		4566	link against libm or something equivalent. Enabling this when the C<floor>
		4567	function is not available will fail, so the safe default is to not enable
		4568	this.
		4569
3143	=item EV_USE_MONOTONIC	4570	=item EV_USE_MONOTONIC
3144		4571
3145	If defined to be C<1>, libev will try to detect the availability of the	4572	If defined to be C<1>, libev will try to detect the availability of the
3146	monotonic clock option at both compile time and runtime. Otherwise no use	4573	monotonic clock option at both compile time and runtime. Otherwise no
3147	of the monotonic clock option will be attempted. If you enable this, you	4574	use of the monotonic clock option will be attempted. If you enable this,
3148	usually have to link against librt or something similar. Enabling it when	4575	you usually have to link against librt or something similar. Enabling it
3149	the functionality isn't available is safe, though, although you have	4576	when the functionality isn't available is safe, though, although you have
3150	to make sure you link against any libraries where the C<clock_gettime>	4577	to make sure you link against any libraries where the C<clock_gettime>
3151	function is hiding in (often F<-lrt>).	4578	function is hiding in (often F<-lrt>). See also C<EV_USE_CLOCK_SYSCALL>.
3152		4579
3153	=item EV_USE_REALTIME	4580	=item EV_USE_REALTIME
3154		4581
3155	If defined to be C<1>, libev will try to detect the availability of the	4582	If defined to be C<1>, libev will try to detect the availability of the
3156	real-time clock option at compile time (and assume its availability at	4583	real-time clock option at compile time (and assume its availability
3157	runtime if successful). Otherwise no use of the real-time clock option will	4584	at runtime if successful). Otherwise no use of the real-time clock
3158	be attempted. This effectively replaces C<gettimeofday> by C<clock_get	4585	option will be attempted. This effectively replaces C<gettimeofday>
3159	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See the	4586	by C<clock_get (CLOCK_REALTIME, ...)> and will not normally affect
3160	note about libraries in the description of C<EV_USE_MONOTONIC>, though.	4587	correctness. See the note about libraries in the description of
		4588	C<EV_USE_MONOTONIC>, though. Defaults to the opposite value of
		4589	C<EV_USE_CLOCK_SYSCALL>.
		4590
		4591	=item EV_USE_CLOCK_SYSCALL
		4592
		4593	If defined to be C<1>, libev will try to use a direct syscall instead
		4594	of calling the system-provided C<clock_gettime> function. This option
		4595	exists because on GNU/Linux, C<clock_gettime> is in C<librt>, but C<librt>
		4596	unconditionally pulls in C<libpthread>, slowing down single-threaded
		4597	programs needlessly. Using a direct syscall is slightly slower (in
		4598	theory), because no optimised vdso implementation can be used, but avoids
		4599	the pthread dependency. Defaults to C<1> on GNU/Linux with glibc 2.x or
		4600	higher, as it simplifies linking (no need for C<-lrt>).
3161		4601
3162	=item EV_USE_NANOSLEEP	4602	=item EV_USE_NANOSLEEP
3163		4603
3164	If defined to be C<1>, libev will assume that C<nanosleep ()> is available	4604	If defined to be C<1>, libev will assume that C<nanosleep ()> is available
3165	and will use it for delays. Otherwise it will use C<select ()>.	4605	and will use it for delays. Otherwise it will use C<select ()>.
…		…
3181		4621
3182	=item EV_SELECT_USE_FD_SET	4622	=item EV_SELECT_USE_FD_SET
3183		4623
3184	If defined to C<1>, then the select backend will use the system C<fd_set>	4624	If defined to C<1>, then the select backend will use the system C<fd_set>
3185	structure. This is useful if libev doesn't compile due to a missing	4625	structure. This is useful if libev doesn't compile due to a missing
3186	C<NFDBITS> or C<fd_mask> definition or it mis-guesses the bitset layout on	4626	C<NFDBITS> or C<fd_mask> definition or it mis-guesses the bitset layout
3187	exotic systems. This usually limits the range of file descriptors to some	4627	on exotic systems. This usually limits the range of file descriptors to
3188	low limit such as 1024 or might have other limitations (winsocket only	4628	some low limit such as 1024 or might have other limitations (winsocket
3189	allows 64 sockets). The C<FD_SETSIZE> macro, set before compilation, might	4629	only allows 64 sockets). The C<FD_SETSIZE> macro, set before compilation,
3190	influence the size of the C<fd_set> used.	4630	configures the maximum size of the C<fd_set>.
3191		4631
3192	=item EV_SELECT_IS_WINSOCKET	4632	=item EV_SELECT_IS_WINSOCKET
3193		4633
3194	When defined to C<1>, the select backend will assume that	4634	When defined to C<1>, the select backend will assume that
3195	select/socket/connect etc. don't understand file descriptors but	4635	select/socket/connect etc. don't understand file descriptors but
…		…
3197	be used is the winsock select). This means that it will call	4637	be used is the winsock select). This means that it will call
3198	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	4638	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
3199	it is assumed that all these functions actually work on fds, even	4639	it is assumed that all these functions actually work on fds, even
3200	on win32. Should not be defined on non-win32 platforms.	4640	on win32. Should not be defined on non-win32 platforms.
3201		4641
3202	=item EV_FD_TO_WIN32_HANDLE	4642	=item EV_FD_TO_WIN32_HANDLE(fd)
3203		4643
3204	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map	4644	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
3205	file descriptors to socket handles. When not defining this symbol (the	4645	file descriptors to socket handles. When not defining this symbol (the
3206	default), then libev will call C<_get_osfhandle>, which is usually	4646	default), then libev will call C<_get_osfhandle>, which is usually
3207	correct. In some cases, programs use their own file descriptor management,	4647	correct. In some cases, programs use their own file descriptor management,
3208	in which case they can provide this function to map fds to socket handles.	4648	in which case they can provide this function to map fds to socket handles.
3209		4649
		4650	=item EV_WIN32_HANDLE_TO_FD(handle)
		4651
		4652	If C<EV_SELECT_IS_WINSOCKET> then libev maps handles to file descriptors
		4653	using the standard C<_open_osfhandle> function. For programs implementing
		4654	their own fd to handle mapping, overwriting this function makes it easier
		4655	to do so. This can be done by defining this macro to an appropriate value.
		4656
		4657	=item EV_WIN32_CLOSE_FD(fd)
		4658
		4659	If programs implement their own fd to handle mapping on win32, then this
		4660	macro can be used to override the C<close> function, useful to unregister
		4661	file descriptors again. Note that the replacement function has to close
		4662	the underlying OS handle.
		4663
		4664	=item EV_USE_WSASOCKET
		4665
		4666	If defined to be C<1>, libev will use C<WSASocket> to create its internal
		4667	communication socket, which works better in some environments. Otherwise,
		4668	the normal C<socket> function will be used, which works better in other
		4669	environments.
		4670
3210	=item EV_USE_POLL	4671	=item EV_USE_POLL
3211		4672
3212	If defined to be C<1>, libev will compile in support for the C<poll>(2)	4673	If defined to be C<1>, libev will compile in support for the C<poll>(2)
3213	backend. Otherwise it will be enabled on non-win32 platforms. It	4674	backend. Otherwise it will be enabled on non-win32 platforms. It
3214	takes precedence over select.	4675	takes precedence over select.
…		…
3218	If defined to be C<1>, libev will compile in support for the Linux	4679	If defined to be C<1>, libev will compile in support for the Linux
3219	C<epoll>(7) backend. Its availability will be detected at runtime,	4680	C<epoll>(7) backend. Its availability will be detected at runtime,
3220	otherwise another method will be used as fallback. This is the preferred	4681	otherwise another method will be used as fallback. This is the preferred
3221	backend for GNU/Linux systems. If undefined, it will be enabled if the	4682	backend for GNU/Linux systems. If undefined, it will be enabled if the
3222	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.	4683	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
		4684
		4685	=item EV_USE_LINUXAIO
		4686
		4687	If defined to be C<1>, libev will compile in support for the Linux
		4688	aio backend. Due to it's currenbt limitations it has to be requested
		4689	explicitly. If undefined, it will be enabled on linux, otherwise
		4690	disabled.
3223		4691
3224	=item EV_USE_KQUEUE	4692	=item EV_USE_KQUEUE
3225		4693
3226	If defined to be C<1>, libev will compile in support for the BSD style	4694	If defined to be C<1>, libev will compile in support for the BSD style
3227	C<kqueue>(2) backend. Its actual availability will be detected at runtime,	4695	C<kqueue>(2) backend. Its actual availability will be detected at runtime,
…		…
3249	If defined to be C<1>, libev will compile in support for the Linux inotify	4717	If defined to be C<1>, libev will compile in support for the Linux inotify
3250	interface to speed up C<ev_stat> watchers. Its actual availability will	4718	interface to speed up C<ev_stat> watchers. Its actual availability will
3251	be detected at runtime. If undefined, it will be enabled if the headers	4719	be detected at runtime. If undefined, it will be enabled if the headers
3252	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.	4720	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
3253		4721
		4722	=item EV_NO_SMP
		4723
		4724	If defined to be C<1>, libev will assume that memory is always coherent
		4725	between threads, that is, threads can be used, but threads never run on
		4726	different cpus (or different cpu cores). This reduces dependencies
		4727	and makes libev faster.
		4728
		4729	=item EV_NO_THREADS
		4730
		4731	If defined to be C<1>, libev will assume that it will never be called from
		4732	different threads (that includes signal handlers), which is a stronger
		4733	assumption than C<EV_NO_SMP>, above. This reduces dependencies and makes
		4734	libev faster.
		4735
3254	=item EV_ATOMIC_T	4736	=item EV_ATOMIC_T
3255		4737
3256	Libev requires an integer type (suitable for storing C<0> or C<1>) whose	4738	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
3257	access is atomic with respect to other threads or signal contexts. No such	4739	access is atomic with respect to other threads or signal contexts. No
3258	type is easily found in the C language, so you can provide your own type	4740	such type is easily found in the C language, so you can provide your own
3259	that you know is safe for your purposes. It is used both for signal handler "locking"	4741	type that you know is safe for your purposes. It is used both for signal
3260	as well as for signal and thread safety in C<ev_async> watchers.	4742	handler "locking" as well as for signal and thread safety in C<ev_async>
		4743	watchers.
3261		4744
3262	In the absence of this define, libev will use C<sig_atomic_t volatile>	4745	In the absence of this define, libev will use C<sig_atomic_t volatile>
3263	(from F<signal.h>), which is usually good enough on most platforms.	4746	(from F<signal.h>), which is usually good enough on most platforms.
3264		4747
3265	=item EV_H	4748	=item EV_H (h)
3266		4749
3267	The name of the F<ev.h> header file used to include it. The default if	4750	The name of the F<ev.h> header file used to include it. The default if
3268	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be	4751	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
3269	used to virtually rename the F<ev.h> header file in case of conflicts.	4752	used to virtually rename the F<ev.h> header file in case of conflicts.
3270		4753
3271	=item EV_CONFIG_H	4754	=item EV_CONFIG_H (h)
3272		4755
3273	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	4756	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
3274	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	4757	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
3275	C<EV_H>, above.	4758	C<EV_H>, above.
3276		4759
3277	=item EV_EVENT_H	4760	=item EV_EVENT_H (h)
3278		4761
3279	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	4762	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
3280	of how the F<event.h> header can be found, the default is C<"event.h">.	4763	of how the F<event.h> header can be found, the default is C<"event.h">.
3281		4764
3282	=item EV_PROTOTYPES	4765	=item EV_PROTOTYPES (h)
3283		4766
3284	If defined to be C<0>, then F<ev.h> will not define any function	4767	If defined to be C<0>, then F<ev.h> will not define any function
3285	prototypes, but still define all the structs and other symbols. This is	4768	prototypes, but still define all the structs and other symbols. This is
3286	occasionally useful if you want to provide your own wrapper functions	4769	occasionally useful if you want to provide your own wrapper functions
3287	around libev functions.	4770	around libev functions.
…		…
3292	will have the C<struct ev_loop *> as first argument, and you can create	4775	will have the C<struct ev_loop *> as first argument, and you can create
3293	additional independent event loops. Otherwise there will be no support	4776	additional independent event loops. Otherwise there will be no support
3294	for multiple event loops and there is no first event loop pointer	4777	for multiple event loops and there is no first event loop pointer
3295	argument. Instead, all functions act on the single default loop.	4778	argument. Instead, all functions act on the single default loop.
3296		4779
		4780	Note that C<EV_DEFAULT> and C<EV_DEFAULT_> will no longer provide a
		4781	default loop when multiplicity is switched off - you always have to
		4782	initialise the loop manually in this case.
		4783
3297	=item EV_MINPRI	4784	=item EV_MINPRI
3298		4785
3299	=item EV_MAXPRI	4786	=item EV_MAXPRI
3300		4787
3301	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to	4788	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to
…		…
3309	fine.	4796	fine.
3310		4797
3311	If your embedding application does not need any priorities, defining these	4798	If your embedding application does not need any priorities, defining these
3312	both to C<0> will save some memory and CPU.	4799	both to C<0> will save some memory and CPU.
3313		4800
3314	=item EV_PERIODIC_ENABLE	4801	=item EV_PERIODIC_ENABLE, EV_IDLE_ENABLE, EV_EMBED_ENABLE, EV_STAT_ENABLE,
		4802	EV_PREPARE_ENABLE, EV_CHECK_ENABLE, EV_FORK_ENABLE, EV_SIGNAL_ENABLE,
		4803	EV_ASYNC_ENABLE, EV_CHILD_ENABLE.
3315		4804
3316	If undefined or defined to be C<1>, then periodic timers are supported. If	4805	If undefined or defined to be C<1> (and the platform supports it), then
3317	defined to be C<0>, then they are not. Disabling them saves a few kB of	4806	the respective watcher type is supported. If defined to be C<0>, then it
3318	code.	4807	is not. Disabling watcher types mainly saves code size.
3319		4808
3320	=item EV_IDLE_ENABLE	4809	=item EV_FEATURES
3321
3322	If undefined or defined to be C<1>, then idle watchers are supported. If
3323	defined to be C<0>, then they are not. Disabling them saves a few kB of
3324	code.
3325
3326	=item EV_EMBED_ENABLE
3327
3328	If undefined or defined to be C<1>, then embed watchers are supported. If
3329	defined to be C<0>, then they are not. Embed watchers rely on most other
3330	watcher types, which therefore must not be disabled.
3331
3332	=item EV_STAT_ENABLE
3333
3334	If undefined or defined to be C<1>, then stat watchers are supported. If
3335	defined to be C<0>, then they are not.
3336
3337	=item EV_FORK_ENABLE
3338
3339	If undefined or defined to be C<1>, then fork watchers are supported. If
3340	defined to be C<0>, then they are not.
3341
3342	=item EV_ASYNC_ENABLE
3343
3344	If undefined or defined to be C<1>, then async watchers are supported. If
3345	defined to be C<0>, then they are not.
3346
3347	=item EV_MINIMAL
3348		4810
3349	If you need to shave off some kilobytes of code at the expense of some	4811	If you need to shave off some kilobytes of code at the expense of some
3350	speed, define this symbol to C<1>. Currently this is used to override some	4812	speed (but with the full API), you can define this symbol to request
3351	inlining decisions, saves roughly 30% code size on amd64. It also selects a	4813	certain subsets of functionality. The default is to enable all features
3352	much smaller 2-heap for timer management over the default 4-heap.	4814	that can be enabled on the platform.
		4815
		4816	A typical way to use this symbol is to define it to C<0> (or to a bitset
		4817	with some broad features you want) and then selectively re-enable
		4818	additional parts you want, for example if you want everything minimal,
		4819	but multiple event loop support, async and child watchers and the poll
		4820	backend, use this:
		4821
		4822	#define EV_FEATURES 0
		4823	#define EV_MULTIPLICITY 1
		4824	#define EV_USE_POLL 1
		4825	#define EV_CHILD_ENABLE 1
		4826	#define EV_ASYNC_ENABLE 1
		4827
		4828	The actual value is a bitset, it can be a combination of the following
		4829	values (by default, all of these are enabled):
		4830
		4831	=over 4
		4832
		4833	=item C<1> - faster/larger code
		4834
		4835	Use larger code to speed up some operations.
		4836
		4837	Currently this is used to override some inlining decisions (enlarging the
		4838	code size by roughly 30% on amd64).
		4839
		4840	When optimising for size, use of compiler flags such as C<-Os> with
		4841	gcc is recommended, as well as C<-DNDEBUG>, as libev contains a number of
		4842	assertions.
		4843
		4844	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4845	(e.g. gcc with C<-Os>).
		4846
		4847	=item C<2> - faster/larger data structures
		4848
		4849	Replaces the small 2-heap for timer management by a faster 4-heap, larger
		4850	hash table sizes and so on. This will usually further increase code size
		4851	and can additionally have an effect on the size of data structures at
		4852	runtime.
		4853
		4854	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4855	(e.g. gcc with C<-Os>).
		4856
		4857	=item C<4> - full API configuration
		4858
		4859	This enables priorities (sets C<EV_MAXPRI>=2 and C<EV_MINPRI>=-2), and
		4860	enables multiplicity (C<EV_MULTIPLICITY>=1).
		4861
		4862	=item C<8> - full API
		4863
		4864	This enables a lot of the "lesser used" API functions. See C<ev.h> for
		4865	details on which parts of the API are still available without this
		4866	feature, and do not complain if this subset changes over time.
		4867
		4868	=item C<16> - enable all optional watcher types
		4869
		4870	Enables all optional watcher types. If you want to selectively enable
		4871	only some watcher types other than I/O and timers (e.g. prepare,
		4872	embed, async, child...) you can enable them manually by defining
		4873	C<EV_watchertype_ENABLE> to C<1> instead.
		4874
		4875	=item C<32> - enable all backends
		4876
		4877	This enables all backends - without this feature, you need to enable at
		4878	least one backend manually (C<EV_USE_SELECT> is a good choice).
		4879
		4880	=item C<64> - enable OS-specific "helper" APIs
		4881
		4882	Enable inotify, eventfd, signalfd and similar OS-specific helper APIs by
		4883	default.
		4884
		4885	=back
		4886
		4887	Compiling with C<gcc -Os -DEV_STANDALONE -DEV_USE_EPOLL=1 -DEV_FEATURES=0>
		4888	reduces the compiled size of libev from 24.7Kb code/2.8Kb data to 6.5Kb
		4889	code/0.3Kb data on my GNU/Linux amd64 system, while still giving you I/O
		4890	watchers, timers and monotonic clock support.
		4891
		4892	With an intelligent-enough linker (gcc+binutils are intelligent enough
		4893	when you use C<-Wl,--gc-sections -ffunction-sections>) functions unused by
		4894	your program might be left out as well - a binary starting a timer and an
		4895	I/O watcher then might come out at only 5Kb.
		4896
		4897	=item EV_API_STATIC
		4898
		4899	If this symbol is defined (by default it is not), then all identifiers
		4900	will have static linkage. This means that libev will not export any
		4901	identifiers, and you cannot link against libev anymore. This can be useful
		4902	when you embed libev, only want to use libev functions in a single file,
		4903	and do not want its identifiers to be visible.
		4904
		4905	To use this, define C<EV_API_STATIC> and include F<ev.c> in the file that
		4906	wants to use libev.
		4907
		4908	This option only works when libev is compiled with a C compiler, as C++
		4909	doesn't support the required declaration syntax.
		4910
		4911	=item EV_AVOID_STDIO
		4912
		4913	If this is set to C<1> at compiletime, then libev will avoid using stdio
		4914	functions (printf, scanf, perror etc.). This will increase the code size
		4915	somewhat, but if your program doesn't otherwise depend on stdio and your
		4916	libc allows it, this avoids linking in the stdio library which is quite
		4917	big.
		4918
		4919	Note that error messages might become less precise when this option is
		4920	enabled.
		4921
		4922	=item EV_NSIG
		4923
		4924	The highest supported signal number, +1 (or, the number of
		4925	signals): Normally, libev tries to deduce the maximum number of signals
		4926	automatically, but sometimes this fails, in which case it can be
		4927	specified. Also, using a lower number than detected (C<32> should be
		4928	good for about any system in existence) can save some memory, as libev
		4929	statically allocates some 12-24 bytes per signal number.
3353		4930
3354	=item EV_PID_HASHSIZE	4931	=item EV_PID_HASHSIZE
3355		4932
3356	C<ev_child> watchers use a small hash table to distribute workload by	4933	C<ev_child> watchers use a small hash table to distribute workload by
3357	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	4934	pid. The default size is C<16> (or C<1> with C<EV_FEATURES> disabled),
3358	than enough. If you need to manage thousands of children you might want to	4935	usually more than enough. If you need to manage thousands of children you
3359	increase this value (I<must> be a power of two).	4936	might want to increase this value (I<must> be a power of two).
3360		4937
3361	=item EV_INOTIFY_HASHSIZE	4938	=item EV_INOTIFY_HASHSIZE
3362		4939
3363	C<ev_stat> watchers use a small hash table to distribute workload by	4940	C<ev_stat> watchers use a small hash table to distribute workload by
3364	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	4941	inotify watch id. The default size is C<16> (or C<1> with C<EV_FEATURES>
3365	usually more than enough. If you need to manage thousands of C<ev_stat>	4942	disabled), usually more than enough. If you need to manage thousands of
3366	watchers you might want to increase this value (I<must> be a power of	4943	C<ev_stat> watchers you might want to increase this value (I<must> be a
3367	two).	4944	power of two).
3368		4945
3369	=item EV_USE_4HEAP	4946	=item EV_USE_4HEAP
3370		4947
3371	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4948	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3372	timer and periodics heaps, libev uses a 4-heap when this symbol is defined	4949	timer and periodics heaps, libev uses a 4-heap when this symbol is defined
3373	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably	4950	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably
3374	faster performance with many (thousands) of watchers.	4951	faster performance with many (thousands) of watchers.
3375		4952
3376	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4953	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3377	(disabled).	4954	will be C<0>.
3378		4955
3379	=item EV_HEAP_CACHE_AT	4956	=item EV_HEAP_CACHE_AT
3380		4957
3381	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4958	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3382	timer and periodics heaps, libev can cache the timestamp (I<at>) within	4959	timer and periodics heaps, libev can cache the timestamp (I<at>) within
3383	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),	4960	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
3384	which uses 8-12 bytes more per watcher and a few hundred bytes more code,	4961	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
3385	but avoids random read accesses on heap changes. This improves performance	4962	but avoids random read accesses on heap changes. This improves performance
3386	noticeably with many (hundreds) of watchers.	4963	noticeably with many (hundreds) of watchers.
3387		4964
3388	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4965	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3389	(disabled).	4966	will be C<0>.
3390		4967
3391	=item EV_VERIFY	4968	=item EV_VERIFY
3392		4969
3393	Controls how much internal verification (see C<ev_loop_verify ()>) will	4970	Controls how much internal verification (see C<ev_verify ()>) will
3394	be done: If set to C<0>, no internal verification code will be compiled	4971	be done: If set to C<0>, no internal verification code will be compiled
3395	in. If set to C<1>, then verification code will be compiled in, but not	4972	in. If set to C<1>, then verification code will be compiled in, but not
3396	called. If set to C<2>, then the internal verification code will be	4973	called. If set to C<2>, then the internal verification code will be
3397	called once per loop, which can slow down libev. If set to C<3>, then the	4974	called once per loop, which can slow down libev. If set to C<3>, then the
3398	verification code will be called very frequently, which will slow down	4975	verification code will be called very frequently, which will slow down
3399	libev considerably.	4976	libev considerably.
3400		4977
3401	The default is C<1>, unless C<EV_MINIMAL> is set, in which case it will be	4978	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3402	C<0>.	4979	will be C<0>.
3403		4980
3404	=item EV_COMMON	4981	=item EV_COMMON
3405		4982
3406	By default, all watchers have a C<void *data> member. By redefining	4983	By default, all watchers have a C<void *data> member. By redefining
3407	this macro to a something else you can include more and other types of	4984	this macro to something else you can include more and other types of
3408	members. You have to define it each time you include one of the files,	4985	members. You have to define it each time you include one of the files,
3409	though, and it must be identical each time.	4986	though, and it must be identical each time.
3410		4987
3411	For example, the perl EV module uses something like this:	4988	For example, the perl EV module uses something like this:
3412		4989
…		…
3465	file.	5042	file.
3466		5043
3467	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	5044	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
3468	that everybody includes and which overrides some configure choices:	5045	that everybody includes and which overrides some configure choices:
3469		5046
3470	#define EV_MINIMAL 1	5047	#define EV_FEATURES 8
3471	#define EV_USE_POLL 0	5048	#define EV_USE_SELECT 1
3472	#define EV_MULTIPLICITY 0
3473	#define EV_PERIODIC_ENABLE 0	5049	#define EV_PREPARE_ENABLE 1
		5050	#define EV_IDLE_ENABLE 1
3474	#define EV_STAT_ENABLE 0	5051	#define EV_SIGNAL_ENABLE 1
3475	#define EV_FORK_ENABLE 0	5052	#define EV_CHILD_ENABLE 1
		5053	#define EV_USE_STDEXCEPT 0
3476	#define EV_CONFIG_H <config.h>	5054	#define EV_CONFIG_H <config.h>
3477	#define EV_MINPRI 0
3478	#define EV_MAXPRI 0
3479		5055
3480	#include "ev++.h"	5056	#include "ev++.h"
3481		5057
3482	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	5058	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
3483		5059
3484	#include "ev_cpp.h"	5060	#include "ev_cpp.h"
3485	#include "ev.c"	5061	#include "ev.c"
3486		5062
3487	=head1 INTERACTION WITH OTHER PROGRAMS OR LIBRARIES	5063	=head1 INTERACTION WITH OTHER PROGRAMS, LIBRARIES OR THE ENVIRONMENT
3488		5064
3489	=head2 THREADS AND COROUTINES	5065	=head2 THREADS AND COROUTINES
3490		5066
3491	=head3 THREADS	5067	=head3 THREADS
3492		5068
…		…
3543	default loop and triggering an C<ev_async> watcher from the default loop	5119	default loop and triggering an C<ev_async> watcher from the default loop
3544	watcher callback into the event loop interested in the signal.	5120	watcher callback into the event loop interested in the signal.
3545		5121
3546	=back	5122	=back
3547		5123
		5124	See also L</THREAD LOCKING EXAMPLE>.
		5125
3548	=head3 COROUTINES	5126	=head3 COROUTINES
3549		5127
3550	Libev is very accommodating to coroutines ("cooperative threads"):	5128	Libev is very accommodating to coroutines ("cooperative threads"):
3551	libev fully supports nesting calls to its functions from different	5129	libev fully supports nesting calls to its functions from different
3552	coroutines (e.g. you can call C<ev_loop> on the same loop from two	5130	coroutines (e.g. you can call C<ev_run> on the same loop from two
3553	different coroutines, and switch freely between both coroutines running the	5131	different coroutines, and switch freely between both coroutines running
3554	loop, as long as you don't confuse yourself). The only exception is that	5132	the loop, as long as you don't confuse yourself). The only exception is
3555	you must not do this from C<ev_periodic> reschedule callbacks.	5133	that you must not do this from C<ev_periodic> reschedule callbacks.
3556		5134
3557	Care has been taken to ensure that libev does not keep local state inside	5135	Care has been taken to ensure that libev does not keep local state inside
3558	C<ev_loop>, and other calls do not usually allow for coroutine switches as	5136	C<ev_run>, and other calls do not usually allow for coroutine switches as
3559	they do not clal any callbacks.	5137	they do not call any callbacks.
3560		5138
3561	=head2 COMPILER WARNINGS	5139	=head2 COMPILER WARNINGS
3562		5140
3563	Depending on your compiler and compiler settings, you might get no or a	5141	Depending on your compiler and compiler settings, you might get no or a
3564	lot of warnings when compiling libev code. Some people are apparently	5142	lot of warnings when compiling libev code. Some people are apparently
…		…
3574	maintainable.	5152	maintainable.
3575		5153
3576	And of course, some compiler warnings are just plain stupid, or simply	5154	And of course, some compiler warnings are just plain stupid, or simply
3577	wrong (because they don't actually warn about the condition their message	5155	wrong (because they don't actually warn about the condition their message
3578	seems to warn about). For example, certain older gcc versions had some	5156	seems to warn about). For example, certain older gcc versions had some
3579	warnings that resulted an extreme number of false positives. These have	5157	warnings that resulted in an extreme number of false positives. These have
3580	been fixed, but some people still insist on making code warn-free with	5158	been fixed, but some people still insist on making code warn-free with
3581	such buggy versions.	5159	such buggy versions.
3582		5160
3583	While libev is written to generate as few warnings as possible,	5161	While libev is written to generate as few warnings as possible,
3584	"warn-free" code is not a goal, and it is recommended not to build libev	5162	"warn-free" code is not a goal, and it is recommended not to build libev
…		…
3598	==2274== definitely lost: 0 bytes in 0 blocks.	5176	==2274== definitely lost: 0 bytes in 0 blocks.
3599	==2274== possibly lost: 0 bytes in 0 blocks.	5177	==2274== possibly lost: 0 bytes in 0 blocks.
3600	==2274== still reachable: 256 bytes in 1 blocks.	5178	==2274== still reachable: 256 bytes in 1 blocks.
3601		5179
3602	Then there is no memory leak, just as memory accounted to global variables	5180	Then there is no memory leak, just as memory accounted to global variables
3603	is not a memleak - the memory is still being refernced, and didn't leak.	5181	is not a memleak - the memory is still being referenced, and didn't leak.
3604		5182
3605	Similarly, under some circumstances, valgrind might report kernel bugs	5183	Similarly, under some circumstances, valgrind might report kernel bugs
3606	as if it were a bug in libev (e.g. in realloc or in the poll backend,	5184	as if it were a bug in libev (e.g. in realloc or in the poll backend,
3607	although an acceptable workaround has been found here), or it might be	5185	although an acceptable workaround has been found here), or it might be
3608	confused.	5186	confused.
…		…
3620	I suggest using suppression lists.	5198	I suggest using suppression lists.
3621		5199
3622		5200
3623	=head1 PORTABILITY NOTES	5201	=head1 PORTABILITY NOTES
3624		5202
		5203	=head2 GNU/LINUX 32 BIT LIMITATIONS
		5204
		5205	GNU/Linux is the only common platform that supports 64 bit file/large file
		5206	interfaces but I<disables> them by default.
		5207
		5208	That means that libev compiled in the default environment doesn't support
		5209	files larger than 2GiB or so, which mainly affects C<ev_stat> watchers.
		5210
		5211	Unfortunately, many programs try to work around this GNU/Linux issue
		5212	by enabling the large file API, which makes them incompatible with the
		5213	standard libev compiled for their system.
		5214
		5215	Likewise, libev cannot enable the large file API itself as this would
		5216	suddenly make it incompatible to the default compile time environment,
		5217	i.e. all programs not using special compile switches.
		5218
		5219	=head2 OS/X AND DARWIN BUGS
		5220
		5221	The whole thing is a bug if you ask me - basically any system interface
		5222	you touch is broken, whether it is locales, poll, kqueue or even the
		5223	OpenGL drivers.
		5224
		5225	=head3 C<kqueue> is buggy
		5226
		5227	The kqueue syscall is broken in all known versions - most versions support
		5228	only sockets, many support pipes.
		5229
		5230	Libev tries to work around this by not using C<kqueue> by default on this
		5231	rotten platform, but of course you can still ask for it when creating a
		5232	loop - embedding a socket-only kqueue loop into a select-based one is
		5233	probably going to work well.
		5234
		5235	=head3 C<poll> is buggy
		5236
		5237	Instead of fixing C<kqueue>, Apple replaced their (working) C<poll>
		5238	implementation by something calling C<kqueue> internally around the 10.5.6
		5239	release, so now C<kqueue> I<and> C<poll> are broken.
		5240
		5241	Libev tries to work around this by not using C<poll> by default on
		5242	this rotten platform, but of course you can still ask for it when creating
		5243	a loop.
		5244
		5245	=head3 C<select> is buggy
		5246
		5247	All that's left is C<select>, and of course Apple found a way to fuck this
		5248	one up as well: On OS/X, C<select> actively limits the number of file
		5249	descriptors you can pass in to 1024 - your program suddenly crashes when
		5250	you use more.
		5251
		5252	There is an undocumented "workaround" for this - defining
		5253	C<_DARWIN_UNLIMITED_SELECT>, which libev tries to use, so select I<should>
		5254	work on OS/X.
		5255
		5256	=head2 SOLARIS PROBLEMS AND WORKAROUNDS
		5257
		5258	=head3 C<errno> reentrancy
		5259
		5260	The default compile environment on Solaris is unfortunately so
		5261	thread-unsafe that you can't even use components/libraries compiled
		5262	without C<-D_REENTRANT> in a threaded program, which, of course, isn't
		5263	defined by default. A valid, if stupid, implementation choice.
		5264
		5265	If you want to use libev in threaded environments you have to make sure
		5266	it's compiled with C<_REENTRANT> defined.
		5267
		5268	=head3 Event port backend
		5269
		5270	The scalable event interface for Solaris is called "event
		5271	ports". Unfortunately, this mechanism is very buggy in all major
		5272	releases. If you run into high CPU usage, your program freezes or you get
		5273	a large number of spurious wakeups, make sure you have all the relevant
		5274	and latest kernel patches applied. No, I don't know which ones, but there
		5275	are multiple ones to apply, and afterwards, event ports actually work
		5276	great.
		5277
		5278	If you can't get it to work, you can try running the program by setting
		5279	the environment variable C<LIBEV_FLAGS=3> to only allow C<poll> and
		5280	C<select> backends.
		5281
		5282	=head2 AIX POLL BUG
		5283
		5284	AIX unfortunately has a broken C<poll.h> header. Libev works around
		5285	this by trying to avoid the poll backend altogether (i.e. it's not even
		5286	compiled in), which normally isn't a big problem as C<select> works fine
		5287	with large bitsets on AIX, and AIX is dead anyway.
		5288
3625	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS	5289	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
		5290
		5291	=head3 General issues
3626		5292
3627	Win32 doesn't support any of the standards (e.g. POSIX) that libev	5293	Win32 doesn't support any of the standards (e.g. POSIX) that libev
3628	requires, and its I/O model is fundamentally incompatible with the POSIX	5294	requires, and its I/O model is fundamentally incompatible with the POSIX
3629	model. Libev still offers limited functionality on this platform in	5295	model. Libev still offers limited functionality on this platform in
3630	the form of the C<EVBACKEND_SELECT> backend, and only supports socket	5296	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
3631	descriptors. This only applies when using Win32 natively, not when using	5297	descriptors. This only applies when using Win32 natively, not when using
3632	e.g. cygwin.	5298	e.g. cygwin. Actually, it only applies to the microsofts own compilers,
		5299	as every compiler comes with a slightly differently broken/incompatible
		5300	environment.
3633		5301
3634	Lifting these limitations would basically require the full	5302	Lifting these limitations would basically require the full
3635	re-implementation of the I/O system. If you are into these kinds of	5303	re-implementation of the I/O system. If you are into this kind of thing,
3636	things, then note that glib does exactly that for you in a very portable	5304	then note that glib does exactly that for you in a very portable way (note
3637	way (note also that glib is the slowest event library known to man).	5305	also that glib is the slowest event library known to man).
3638		5306
3639	There is no supported compilation method available on windows except	5307	There is no supported compilation method available on windows except
3640	embedding it into other applications.	5308	embedding it into other applications.
		5309
		5310	Sensible signal handling is officially unsupported by Microsoft - libev
		5311	tries its best, but under most conditions, signals will simply not work.
3641		5312
3642	Not a libev limitation but worth mentioning: windows apparently doesn't	5313	Not a libev limitation but worth mentioning: windows apparently doesn't
3643	accept large writes: instead of resulting in a partial write, windows will	5314	accept large writes: instead of resulting in a partial write, windows will
3644	either accept everything or return C<ENOBUFS> if the buffer is too large,	5315	either accept everything or return C<ENOBUFS> if the buffer is too large,
3645	so make sure you only write small amounts into your sockets (less than a	5316	so make sure you only write small amounts into your sockets (less than a
…		…
3650	the abysmal performance of winsockets, using a large number of sockets	5321	the abysmal performance of winsockets, using a large number of sockets
3651	is not recommended (and not reasonable). If your program needs to use	5322	is not recommended (and not reasonable). If your program needs to use
3652	more than a hundred or so sockets, then likely it needs to use a totally	5323	more than a hundred or so sockets, then likely it needs to use a totally
3653	different implementation for windows, as libev offers the POSIX readiness	5324	different implementation for windows, as libev offers the POSIX readiness
3654	notification model, which cannot be implemented efficiently on windows	5325	notification model, which cannot be implemented efficiently on windows
3655	(Microsoft monopoly games).	5326	(due to Microsoft monopoly games).
3656		5327
3657	A typical way to use libev under windows is to embed it (see the embedding	5328	A typical way to use libev under windows is to embed it (see the embedding
3658	section for details) and use the following F<evwrap.h> header file instead	5329	section for details) and use the following F<evwrap.h> header file instead
3659	of F<ev.h>:	5330	of F<ev.h>:
3660		5331
…		…
3667	you do I<not> compile the F<ev.c> or any other embedded source files!):	5338	you do I<not> compile the F<ev.c> or any other embedded source files!):
3668		5339
3669	#include "evwrap.h"	5340	#include "evwrap.h"
3670	#include "ev.c"	5341	#include "ev.c"
3671		5342
3672	=over 4
3673
3674	=item The winsocket select function	5343	=head3 The winsocket C<select> function
3675		5344
3676	The winsocket C<select> function doesn't follow POSIX in that it	5345	The winsocket C<select> function doesn't follow POSIX in that it
3677	requires socket I<handles> and not socket I<file descriptors> (it is	5346	requires socket I<handles> and not socket I<file descriptors> (it is
3678	also extremely buggy). This makes select very inefficient, and also	5347	also extremely buggy). This makes select very inefficient, and also
3679	requires a mapping from file descriptors to socket handles (the Microsoft	5348	requires a mapping from file descriptors to socket handles (the Microsoft
…		…
3688	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */	5357	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
3689		5358
3690	Note that winsockets handling of fd sets is O(n), so you can easily get a	5359	Note that winsockets handling of fd sets is O(n), so you can easily get a
3691	complexity in the O(n²) range when using win32.	5360	complexity in the O(n²) range when using win32.
3692		5361
3693	=item Limited number of file descriptors	5362	=head3 Limited number of file descriptors
3694		5363
3695	Windows has numerous arbitrary (and low) limits on things.	5364	Windows has numerous arbitrary (and low) limits on things.
3696		5365
3697	Early versions of winsocket's select only supported waiting for a maximum	5366	Early versions of winsocket's select only supported waiting for a maximum
3698	of C<64> handles (probably owning to the fact that all windows kernels	5367	of C<64> handles (probably owning to the fact that all windows kernels
3699	can only wait for C<64> things at the same time internally; Microsoft	5368	can only wait for C<64> things at the same time internally; Microsoft
3700	recommends spawning a chain of threads and wait for 63 handles and the	5369	recommends spawning a chain of threads and wait for 63 handles and the
3701	previous thread in each. Great).	5370	previous thread in each. Sounds great!).
3702		5371
3703	Newer versions support more handles, but you need to define C<FD_SETSIZE>	5372	Newer versions support more handles, but you need to define C<FD_SETSIZE>
3704	to some high number (e.g. C<2048>) before compiling the winsocket select	5373	to some high number (e.g. C<2048>) before compiling the winsocket select
3705	call (which might be in libev or elsewhere, for example, perl does its own	5374	call (which might be in libev or elsewhere, for example, perl and many
3706	select emulation on windows).	5375	other interpreters do their own select emulation on windows).
3707		5376
3708	Another limit is the number of file descriptors in the Microsoft runtime	5377	Another limit is the number of file descriptors in the Microsoft runtime
3709	libraries, which by default is C<64> (there must be a hidden I<64> fetish	5378	libraries, which by default is C<64> (there must be a hidden I<64>
3710	or something like this inside Microsoft). You can increase this by calling	5379	fetish or something like this inside Microsoft). You can increase this
3711	C<_setmaxstdio>, which can increase this limit to C<2048> (another	5380	by calling C<_setmaxstdio>, which can increase this limit to C<2048>
3712	arbitrary limit), but is broken in many versions of the Microsoft runtime	5381	(another arbitrary limit), but is broken in many versions of the Microsoft
3713	libraries.
3714
3715	This might get you to about C<512> or C<2048> sockets (depending on	5382	runtime libraries. This might get you to about C<512> or C<2048> sockets
3716	windows version and/or the phase of the moon). To get more, you need to	5383	(depending on windows version and/or the phase of the moon). To get more,
3717	wrap all I/O functions and provide your own fd management, but the cost of	5384	you need to wrap all I/O functions and provide your own fd management, but
3718	calling select (O(n²)) will likely make this unworkable.	5385	the cost of calling select (O(n²)) will likely make this unworkable.
3719
3720	=back
3721		5386
3722	=head2 PORTABILITY REQUIREMENTS	5387	=head2 PORTABILITY REQUIREMENTS
3723		5388
3724	In addition to a working ISO-C implementation and of course the	5389	In addition to a working ISO-C implementation and of course the
3725	backend-specific APIs, libev relies on a few additional extensions:	5390	backend-specific APIs, libev relies on a few additional extensions:
…		…
3732	Libev assumes not only that all watcher pointers have the same internal	5397	Libev assumes not only that all watcher pointers have the same internal
3733	structure (guaranteed by POSIX but not by ISO C for example), but it also	5398	structure (guaranteed by POSIX but not by ISO C for example), but it also
3734	assumes that the same (machine) code can be used to call any watcher	5399	assumes that the same (machine) code can be used to call any watcher
3735	callback: The watcher callbacks have different type signatures, but libev	5400	callback: The watcher callbacks have different type signatures, but libev
3736	calls them using an C<ev_watcher *> internally.	5401	calls them using an C<ev_watcher *> internally.
		5402
		5403	=item null pointers and integer zero are represented by 0 bytes
		5404
		5405	Libev uses C<memset> to initialise structs and arrays to C<0> bytes, and
		5406	relies on this setting pointers and integers to null.
		5407
		5408	=item pointer accesses must be thread-atomic
		5409
		5410	Accessing a pointer value must be atomic, it must both be readable and
		5411	writable in one piece - this is the case on all current architectures.
3737		5412
3738	=item C<sig_atomic_t volatile> must be thread-atomic as well	5413	=item C<sig_atomic_t volatile> must be thread-atomic as well
3739		5414
3740	The type C<sig_atomic_t volatile> (or whatever is defined as	5415	The type C<sig_atomic_t volatile> (or whatever is defined as
3741	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different	5416	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different
…		…
3750	thread" or will block signals process-wide, both behaviours would	5425	thread" or will block signals process-wide, both behaviours would
3751	be compatible with libev. Interaction between C<sigprocmask> and	5426	be compatible with libev. Interaction between C<sigprocmask> and
3752	C<pthread_sigmask> could complicate things, however.	5427	C<pthread_sigmask> could complicate things, however.
3753		5428
3754	The most portable way to handle signals is to block signals in all threads	5429	The most portable way to handle signals is to block signals in all threads
3755	except the initial one, and run the default loop in the initial thread as	5430	except the initial one, and run the signal handling loop in the initial
3756	well.	5431	thread as well.
3757		5432
3758	=item C<long> must be large enough for common memory allocation sizes	5433	=item C<long> must be large enough for common memory allocation sizes
3759		5434
3760	To improve portability and simplify its API, libev uses C<long> internally	5435	To improve portability and simplify its API, libev uses C<long> internally
3761	instead of C<size_t> when allocating its data structures. On non-POSIX	5436	instead of C<size_t> when allocating its data structures. On non-POSIX
…		…
3764	watchers.	5439	watchers.
3765		5440
3766	=item C<double> must hold a time value in seconds with enough accuracy	5441	=item C<double> must hold a time value in seconds with enough accuracy
3767		5442
3768	The type C<double> is used to represent timestamps. It is required to	5443	The type C<double> is used to represent timestamps. It is required to
3769	have at least 51 bits of mantissa (and 9 bits of exponent), which is good	5444	have at least 51 bits of mantissa (and 9 bits of exponent), which is
3770	enough for at least into the year 4000. This requirement is fulfilled by	5445	good enough for at least into the year 4000 with millisecond accuracy
		5446	(the design goal for libev). This requirement is overfulfilled by
3771	implementations implementing IEEE 754 (basically all existing ones).	5447	implementations using IEEE 754, which is basically all existing ones.
		5448
		5449	With IEEE 754 doubles, you get microsecond accuracy until at least the
		5450	year 2255 (and millisecond accuracy till the year 287396 - by then, libev
		5451	is either obsolete or somebody patched it to use C<long double> or
		5452	something like that, just kidding).
3772		5453
3773	=back	5454	=back
3774		5455
3775	If you know of other additional requirements drop me a note.	5456	If you know of other additional requirements drop me a note.
3776		5457
…		…
3838	=item Processing ev_async_send: O(number_of_async_watchers)	5519	=item Processing ev_async_send: O(number_of_async_watchers)
3839		5520
3840	=item Processing signals: O(max_signal_number)	5521	=item Processing signals: O(max_signal_number)
3841		5522
3842	Sending involves a system call I<iff> there were no other C<ev_async_send>	5523	Sending involves a system call I<iff> there were no other C<ev_async_send>
3843	calls in the current loop iteration. Checking for async and signal events	5524	calls in the current loop iteration and the loop is currently
		5525	blocked. Checking for async and signal events involves iterating over all
3844	involves iterating over all running async watchers or all signal numbers.	5526	running async watchers or all signal numbers.
3845		5527
3846	=back	5528	=back
3847		5529
3848		5530
		5531	=head1 PORTING FROM LIBEV 3.X TO 4.X
		5532
		5533	The major version 4 introduced some incompatible changes to the API.
		5534
		5535	At the moment, the C<ev.h> header file provides compatibility definitions
		5536	for all changes, so most programs should still compile. The compatibility
		5537	layer might be removed in later versions of libev, so better update to the
		5538	new API early than late.
		5539
		5540	=over 4
		5541
		5542	=item C<EV_COMPAT3> backwards compatibility mechanism
		5543
		5544	The backward compatibility mechanism can be controlled by
		5545	C<EV_COMPAT3>. See L</"PREPROCESSOR SYMBOLS/MACROS"> in the L</EMBEDDING>
		5546	section.
		5547
		5548	=item C<ev_default_destroy> and C<ev_default_fork> have been removed
		5549
		5550	These calls can be replaced easily by their C<ev_loop_xxx> counterparts:
		5551
		5552	ev_loop_destroy (EV_DEFAULT_UC);
		5553	ev_loop_fork (EV_DEFAULT);
		5554
		5555	=item function/symbol renames
		5556
		5557	A number of functions and symbols have been renamed:
		5558
		5559	ev_loop => ev_run
		5560	EVLOOP_NONBLOCK => EVRUN_NOWAIT
		5561	EVLOOP_ONESHOT => EVRUN_ONCE
		5562
		5563	ev_unloop => ev_break
		5564	EVUNLOOP_CANCEL => EVBREAK_CANCEL
		5565	EVUNLOOP_ONE => EVBREAK_ONE
		5566	EVUNLOOP_ALL => EVBREAK_ALL
		5567
		5568	EV_TIMEOUT => EV_TIMER
		5569
		5570	ev_loop_count => ev_iteration
		5571	ev_loop_depth => ev_depth
		5572	ev_loop_verify => ev_verify
		5573
		5574	Most functions working on C<struct ev_loop> objects don't have an
		5575	C<ev_loop_> prefix, so it was removed; C<ev_loop>, C<ev_unloop> and
		5576	associated constants have been renamed to not collide with the C<struct
		5577	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme
		5578	as all other watcher types. Note that C<ev_loop_fork> is still called
		5579	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>
		5580	typedef.
		5581
		5582	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>
		5583
		5584	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different
		5585	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile
		5586	and work, but the library code will of course be larger.
		5587
		5588	=back
		5589
		5590
		5591	=head1 GLOSSARY
		5592
		5593	=over 4
		5594
		5595	=item active
		5596
		5597	A watcher is active as long as it has been started and not yet stopped.
		5598	See L</WATCHER STATES> for details.
		5599
		5600	=item application
		5601
		5602	In this document, an application is whatever is using libev.
		5603
		5604	=item backend
		5605
		5606	The part of the code dealing with the operating system interfaces.
		5607
		5608	=item callback
		5609
		5610	The address of a function that is called when some event has been
		5611	detected. Callbacks are being passed the event loop, the watcher that
		5612	received the event, and the actual event bitset.
		5613
		5614	=item callback/watcher invocation
		5615
		5616	The act of calling the callback associated with a watcher.
		5617
		5618	=item event
		5619
		5620	A change of state of some external event, such as data now being available
		5621	for reading on a file descriptor, time having passed or simply not having
		5622	any other events happening anymore.
		5623
		5624	In libev, events are represented as single bits (such as C<EV_READ> or
		5625	C<EV_TIMER>).
		5626
		5627	=item event library
		5628
		5629	A software package implementing an event model and loop.
		5630
		5631	=item event loop
		5632
		5633	An entity that handles and processes external events and converts them
		5634	into callback invocations.
		5635
		5636	=item event model
		5637
		5638	The model used to describe how an event loop handles and processes
		5639	watchers and events.
		5640
		5641	=item pending
		5642
		5643	A watcher is pending as soon as the corresponding event has been
		5644	detected. See L</WATCHER STATES> for details.
		5645
		5646	=item real time
		5647
		5648	The physical time that is observed. It is apparently strictly monotonic :)
		5649
		5650	=item wall-clock time
		5651
		5652	The time and date as shown on clocks. Unlike real time, it can actually
		5653	be wrong and jump forwards and backwards, e.g. when you adjust your
		5654	clock.
		5655
		5656	=item watcher
		5657
		5658	A data structure that describes interest in certain events. Watchers need
		5659	to be started (attached to an event loop) before they can receive events.
		5660
		5661	=back
		5662
3849	=head1 AUTHOR	5663	=head1 AUTHOR
3850		5664
3851	Marc Lehmann <libev@schmorp.de>.	5665	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael
		5666	Magnusson and Emanuele Giaquinta, and minor corrections by many others.
3852		5667

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines