ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.249 by root, Wed Jul 8 04:29:31 2009 UTC vs.
Revision 1.454 by root, Tue Jun 25 05:17:50 2019 UTC

		1	=encoding utf-8
		2
1	=head1 NAME	3	=head1 NAME
2		4
3	libev - a high performance full-featured event loop written in C	5	libev - a high performance full-featured event loop written in C
4		6
5	=head1 SYNOPSIS	7	=head1 SYNOPSIS
…		…
26	puts ("stdin ready");	28	puts ("stdin ready");
27	// for one-shot events, one must manually stop the watcher	29	// for one-shot events, one must manually stop the watcher
28	// with its corresponding stop function.	30	// with its corresponding stop function.
29	ev_io_stop (EV_A_ w);	31	ev_io_stop (EV_A_ w);
30		32
31	// this causes all nested ev_loop's to stop iterating	33	// this causes all nested ev_run's to stop iterating
32	ev_unloop (EV_A_ EVUNLOOP_ALL);	34	ev_break (EV_A_ EVBREAK_ALL);
33	}	35	}
34		36
35	// another callback, this time for a time-out	37	// another callback, this time for a time-out
36	static void	38	static void
37	timeout_cb (EV_P_ ev_timer *w, int revents)	39	timeout_cb (EV_P_ ev_timer *w, int revents)
38	{	40	{
39	puts ("timeout");	41	puts ("timeout");
40	// this causes the innermost ev_loop to stop iterating	42	// this causes the innermost ev_run to stop iterating
41	ev_unloop (EV_A_ EVUNLOOP_ONE);	43	ev_break (EV_A_ EVBREAK_ONE);
42	}	44	}
43		45
44	int	46	int
45	main (void)	47	main (void)
46	{	48	{
47	// use the default event loop unless you have special needs	49	// use the default event loop unless you have special needs
48	struct ev_loop *loop = ev_default_loop (0);	50	struct ev_loop *loop = EV_DEFAULT;
49		51
50	// initialise an io watcher, then start it	52	// initialise an io watcher, then start it
51	// this one will watch for stdin to become readable	53	// this one will watch for stdin to become readable
52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	54	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
53	ev_io_start (loop, &stdin_watcher);	55	ev_io_start (loop, &stdin_watcher);
…		…
56	// simple non-repeating 5.5 second timeout	58	// simple non-repeating 5.5 second timeout
57	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	59	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
58	ev_timer_start (loop, &timeout_watcher);	60	ev_timer_start (loop, &timeout_watcher);
59		61
60	// now wait for events to arrive	62	// now wait for events to arrive
61	ev_loop (loop, 0);	63	ev_run (loop, 0);
62		64
63	// unloop was called, so exit	65	// break was called, so exit
64	return 0;	66	return 0;
65	}	67	}
66		68
67	=head1 ABOUT THIS DOCUMENT	69	=head1 ABOUT THIS DOCUMENT
68		70
…		…
75	While this document tries to be as complete as possible in documenting	77	While this document tries to be as complete as possible in documenting
76	libev, its usage and the rationale behind its design, it is not a tutorial	78	libev, its usage and the rationale behind its design, it is not a tutorial
77	on event-based programming, nor will it introduce event-based programming	79	on event-based programming, nor will it introduce event-based programming
78	with libev.	80	with libev.
79		81
80	Familarity with event based programming techniques in general is assumed	82	Familiarity with event based programming techniques in general is assumed
81	throughout this document.	83	throughout this document.
		84
		85	=head1 WHAT TO READ WHEN IN A HURRY
		86
		87	This manual tries to be very detailed, but unfortunately, this also makes
		88	it very long. If you just want to know the basics of libev, I suggest
		89	reading L</ANATOMY OF A WATCHER>, then the L</EXAMPLE PROGRAM> above and
		90	look up the missing functions in L</GLOBAL FUNCTIONS> and the C<ev_io> and
		91	C<ev_timer> sections in L</WATCHER TYPES>.
82		92
83	=head1 ABOUT LIBEV	93	=head1 ABOUT LIBEV
84		94
85	Libev is an event loop: you register interest in certain events (such as a	95	Libev is an event loop: you register interest in certain events (such as a
86	file descriptor being readable or a timeout occurring), and it will manage	96	file descriptor being readable or a timeout occurring), and it will manage
…		…
95	details of the event, and then hand it over to libev by I<starting> the	105	details of the event, and then hand it over to libev by I<starting> the
96	watcher.	106	watcher.
97		107
98	=head2 FEATURES	108	=head2 FEATURES
99		109
100	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	110	Libev supports C<select>, C<poll>, the Linux-specific aio and C<epoll>
101	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	111	interfaces, the BSD-specific C<kqueue> and the Solaris-specific event port
102	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	112	mechanisms for file descriptor events (C<ev_io>), the Linux C<inotify>
103	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers	113	interface (for C<ev_stat>), Linux eventfd/signalfd (for faster and cleaner
104	with customised rescheduling (C<ev_periodic>), synchronous signals	114	inter-thread wakeup (C<ev_async>)/signal handling (C<ev_signal>)) relative
105	(C<ev_signal>), process status change events (C<ev_child>), and event	115	timers (C<ev_timer>), absolute timers with customised rescheduling
106	watchers dealing with the event loop mechanism itself (C<ev_idle>,	116	(C<ev_periodic>), synchronous signals (C<ev_signal>), process status
107	C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as	117	change events (C<ev_child>), and event watchers dealing with the event
108	file watchers (C<ev_stat>) and even limited support for fork events	118	loop mechanism itself (C<ev_idle>, C<ev_embed>, C<ev_prepare> and
109	(C<ev_fork>).	119	C<ev_check> watchers) as well as file watchers (C<ev_stat>) and even
		120	limited support for fork events (C<ev_fork>).
110		121
111	It also is quite fast (see this	122	It also is quite fast (see this
112	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent	123	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
113	for example).	124	for example).
114		125
…		…
117	Libev is very configurable. In this manual the default (and most common)	128	Libev is very configurable. In this manual the default (and most common)
118	configuration will be described, which supports multiple event loops. For	129	configuration will be described, which supports multiple event loops. For
119	more info about various configuration options please have a look at	130	more info about various configuration options please have a look at
120	B<EMBED> section in this manual. If libev was configured without support	131	B<EMBED> section in this manual. If libev was configured without support
121	for multiple event loops, then all functions taking an initial argument of	132	for multiple event loops, then all functions taking an initial argument of
122	name C<loop> (which is always of type C<ev_loop *>) will not have	133	name C<loop> (which is always of type C<struct ev_loop *>) will not have
123	this argument.	134	this argument.
124		135
125	=head2 TIME REPRESENTATION	136	=head2 TIME REPRESENTATION
126		137
127	Libev represents time as a single floating point number, representing	138	Libev represents time as a single floating point number, representing
128	the (fractional) number of seconds since the (POSIX) epoch (somewhere	139	the (fractional) number of seconds since the (POSIX) epoch (in practice
129	near the beginning of 1970, details are complicated, don't ask). This	140	somewhere near the beginning of 1970, details are complicated, don't
130	type is called C<ev_tstamp>, which is what you should use too. It usually	141	ask). This type is called C<ev_tstamp>, which is what you should use
131	aliases to the C<double> type in C. When you need to do any calculations	142	too. It usually aliases to the C<double> type in C. When you need to do
132	on it, you should treat it as some floating point value. Unlike the name	143	any calculations on it, you should treat it as some floating point value.
		144
133	component C<stamp> might indicate, it is also used for time differences	145	Unlike the name component C<stamp> might indicate, it is also used for
134	throughout libev.	146	time differences (e.g. delays) throughout libev.
135		147
136	=head1 ERROR HANDLING	148	=head1 ERROR HANDLING
137		149
138	Libev knows three classes of errors: operating system errors, usage errors	150	Libev knows three classes of errors: operating system errors, usage errors
139	and internal errors (bugs).	151	and internal errors (bugs).
…		…
163		175
164	=item ev_tstamp ev_time ()	176	=item ev_tstamp ev_time ()
165		177
166	Returns the current time as libev would use it. Please note that the	178	Returns the current time as libev would use it. Please note that the
167	C<ev_now> function is usually faster and also often returns the timestamp	179	C<ev_now> function is usually faster and also often returns the timestamp
168	you actually want to know.	180	you actually want to know. Also interesting is the combination of
		181	C<ev_now_update> and C<ev_now>.
169		182
170	=item ev_sleep (ev_tstamp interval)	183	=item ev_sleep (ev_tstamp interval)
171		184
172	Sleep for the given interval: The current thread will be blocked until	185	Sleep for the given interval: The current thread will be blocked
173	either it is interrupted or the given time interval has passed. Basically	186	until either it is interrupted or the given time interval has
		187	passed (approximately - it might return a bit earlier even if not
		188	interrupted). Returns immediately if C<< interval <= 0 >>.
		189
174	this is a sub-second-resolution C<sleep ()>.	190	Basically this is a sub-second-resolution C<sleep ()>.
		191
		192	The range of the C<interval> is limited - libev only guarantees to work
		193	with sleep times of up to one day (C<< interval <= 86400 >>).
175		194
176	=item int ev_version_major ()	195	=item int ev_version_major ()
177		196
178	=item int ev_version_minor ()	197	=item int ev_version_minor ()
179		198
…		…
190	as this indicates an incompatible change. Minor versions are usually	209	as this indicates an incompatible change. Minor versions are usually
191	compatible to older versions, so a larger minor version alone is usually	210	compatible to older versions, so a larger minor version alone is usually
192	not a problem.	211	not a problem.
193		212
194	Example: Make sure we haven't accidentally been linked against the wrong	213	Example: Make sure we haven't accidentally been linked against the wrong
195	version.	214	version (note, however, that this will not detect other ABI mismatches,
		215	such as LFS or reentrancy).
196		216
197	assert (("libev version mismatch",	217	assert (("libev version mismatch",
198	ev_version_major () == EV_VERSION_MAJOR	218	ev_version_major () == EV_VERSION_MAJOR
199	&& ev_version_minor () >= EV_VERSION_MINOR));	219	&& ev_version_minor () >= EV_VERSION_MINOR));
200		220
…		…
211	assert (("sorry, no epoll, no sex",	231	assert (("sorry, no epoll, no sex",
212	ev_supported_backends () & EVBACKEND_EPOLL));	232	ev_supported_backends () & EVBACKEND_EPOLL));
213		233
214	=item unsigned int ev_recommended_backends ()	234	=item unsigned int ev_recommended_backends ()
215		235
216	Return the set of all backends compiled into this binary of libev and also	236	Return the set of all backends compiled into this binary of libev and
217	recommended for this platform. This set is often smaller than the one	237	also recommended for this platform, meaning it will work for most file
		238	descriptor types. This set is often smaller than the one returned by
218	returned by C<ev_supported_backends>, as for example kqueue is broken on	239	C<ev_supported_backends>, as for example kqueue is broken on most BSDs
219	most BSDs and will not be auto-detected unless you explicitly request it	240	and will not be auto-detected unless you explicitly request it (assuming
220	(assuming you know what you are doing). This is the set of backends that	241	you know what you are doing). This is the set of backends that libev will
221	libev will probe for if you specify no backends explicitly.	242	probe for if you specify no backends explicitly.
222		243
223	=item unsigned int ev_embeddable_backends ()	244	=item unsigned int ev_embeddable_backends ()
224		245
225	Returns the set of backends that are embeddable in other event loops. This	246	Returns the set of backends that are embeddable in other event loops. This
226	is the theoretical, all-platform, value. To find which backends	247	value is platform-specific but can include backends not available on the
227	might be supported on the current system, you would need to look at	248	current system. To find which embeddable backends might be supported on
228	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for	249	the current system, you would need to look at C<ev_embeddable_backends ()
229	recommended ones.	250	& ev_supported_backends ()>, likewise for recommended ones.
230		251
231	See the description of C<ev_embed> watchers for more info.	252	See the description of C<ev_embed> watchers for more info.
232		253
233	=item ev_set_allocator (void *(*cb)(void *ptr, long size)) [NOT REENTRANT]	254	=item ev_set_allocator (void *(*cb)(void *ptr, long size) throw ())
234		255
235	Sets the allocation function to use (the prototype is similar - the	256	Sets the allocation function to use (the prototype is similar - the
236	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is	257	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
237	used to allocate and free memory (no surprises here). If it returns zero	258	used to allocate and free memory (no surprises here). If it returns zero
238	when memory needs to be allocated (C<size != 0>), the library might abort	259	when memory needs to be allocated (C<size != 0>), the library might abort
…		…
244		265
245	You could override this function in high-availability programs to, say,	266	You could override this function in high-availability programs to, say,
246	free some memory if it cannot allocate memory, to use a special allocator,	267	free some memory if it cannot allocate memory, to use a special allocator,
247	or even to sleep a while and retry until some memory is available.	268	or even to sleep a while and retry until some memory is available.
248		269
		270	Example: The following is the C<realloc> function that libev itself uses
		271	which should work with C<realloc> and C<free> functions of all kinds and
		272	is probably a good basis for your own implementation.
		273
		274	static void *
		275	ev_realloc_emul (void *ptr, long size) EV_NOEXCEPT
		276	{
		277	if (size)
		278	return realloc (ptr, size);
		279
		280	free (ptr);
		281	return 0;
		282	}
		283
249	Example: Replace the libev allocator with one that waits a bit and then	284	Example: Replace the libev allocator with one that waits a bit and then
250	retries (example requires a standards-compliant C<realloc>).	285	retries.
251		286
252	static void *	287	static void *
253	persistent_realloc (void *ptr, size_t size)	288	persistent_realloc (void *ptr, size_t size)
254	{	289	{
		290	if (!size)
		291	{
		292	free (ptr);
		293	return 0;
		294	}
		295
255	for (;;)	296	for (;;)
256	{	297	{
257	void *newptr = realloc (ptr, size);	298	void *newptr = realloc (ptr, size);
258		299
259	if (newptr)	300	if (newptr)
…		…
264	}	305	}
265		306
266	...	307	...
267	ev_set_allocator (persistent_realloc);	308	ev_set_allocator (persistent_realloc);
268		309
269	=item ev_set_syserr_cb (void (*cb)(const char *msg)); [NOT REENTRANT]	310	=item ev_set_syserr_cb (void (*cb)(const char *msg) throw ())
270		311
271	Set the callback function to call on a retryable system call error (such	312	Set the callback function to call on a retryable system call error (such
272	as failed select, poll, epoll_wait). The message is a printable string	313	as failed select, poll, epoll_wait). The message is a printable string
273	indicating the system call or subsystem causing the problem. If this	314	indicating the system call or subsystem causing the problem. If this
274	callback is set, then libev will expect it to remedy the situation, no	315	callback is set, then libev will expect it to remedy the situation, no
…		…
286	}	327	}
287		328
288	...	329	...
289	ev_set_syserr_cb (fatal_error);	330	ev_set_syserr_cb (fatal_error);
290		331
		332	=item ev_feed_signal (int signum)
		333
		334	This function can be used to "simulate" a signal receive. It is completely
		335	safe to call this function at any time, from any context, including signal
		336	handlers or random threads.
		337
		338	Its main use is to customise signal handling in your process, especially
		339	in the presence of threads. For example, you could block signals
		340	by default in all threads (and specifying C<EVFLAG_NOSIGMASK> when
		341	creating any loops), and in one thread, use C<sigwait> or any other
		342	mechanism to wait for signals, then "deliver" them to libev by calling
		343	C<ev_feed_signal>.
		344
291	=back	345	=back
292		346
293	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	347	=head1 FUNCTIONS CONTROLLING EVENT LOOPS
294		348
295	An event loop is described by a C<struct ev_loop *> (the C<struct>	349	An event loop is described by a C<struct ev_loop *> (the C<struct> is
296	is I<not> optional in this case, as there is also an C<ev_loop>	350	I<not> optional in this case unless libev 3 compatibility is disabled, as
297	I<function>).	351	libev 3 had an C<ev_loop> function colliding with the struct name).
298		352
299	The library knows two types of such loops, the I<default> loop, which	353	The library knows two types of such loops, the I<default> loop, which
300	supports signals and child events, and dynamically created loops which do	354	supports child process events, and dynamically created event loops which
301	not.	355	do not.
302		356
303	=over 4	357	=over 4
304		358
305	=item struct ev_loop *ev_default_loop (unsigned int flags)	359	=item struct ev_loop *ev_default_loop (unsigned int flags)
306		360
307	This will initialise the default event loop if it hasn't been initialised	361	This returns the "default" event loop object, which is what you should
308	yet and return it. If the default loop could not be initialised, returns	362	normally use when you just need "the event loop". Event loop objects and
309	false. If it already was initialised it simply returns it (and ignores the	363	the C<flags> parameter are described in more detail in the entry for
310	flags. If that is troubling you, check C<ev_backend ()> afterwards).	364	C<ev_loop_new>.
		365
		366	If the default loop is already initialised then this function simply
		367	returns it (and ignores the flags. If that is troubling you, check
		368	C<ev_backend ()> afterwards). Otherwise it will create it with the given
		369	flags, which should almost always be C<0>, unless the caller is also the
		370	one calling C<ev_run> or otherwise qualifies as "the main program".
311		371
312	If you don't know what event loop to use, use the one returned from this	372	If you don't know what event loop to use, use the one returned from this
313	function.	373	function (or via the C<EV_DEFAULT> macro).
314		374
315	Note that this function is I<not> thread-safe, so if you want to use it	375	Note that this function is I<not> thread-safe, so if you want to use it
316	from multiple threads, you have to lock (note also that this is unlikely,	376	from multiple threads, you have to employ some kind of mutex (note also
317	as loops cannot be shared easily between threads anyway).	377	that this case is unlikely, as loops cannot be shared easily between
		378	threads anyway).
318		379
319	The default loop is the only loop that can handle C<ev_signal> and	380	The default loop is the only loop that can handle C<ev_child> watchers,
320	C<ev_child> watchers, and to do this, it always registers a handler	381	and to do this, it always registers a handler for C<SIGCHLD>. If this is
321	for C<SIGCHLD>. If this is a problem for your application you can either	382	a problem for your application you can either create a dynamic loop with
322	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you	383	C<ev_loop_new> which doesn't do that, or you can simply overwrite the
323	can simply overwrite the C<SIGCHLD> signal handler I<after> calling	384	C<SIGCHLD> signal handler I<after> calling C<ev_default_init>.
324	C<ev_default_init>.	385
		386	Example: This is the most typical usage.
		387
		388	if (!ev_default_loop (0))
		389	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		390
		391	Example: Restrict libev to the select and poll backends, and do not allow
		392	environment settings to be taken into account:
		393
		394	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
		395
		396	=item struct ev_loop *ev_loop_new (unsigned int flags)
		397
		398	This will create and initialise a new event loop object. If the loop
		399	could not be initialised, returns false.
		400
		401	This function is thread-safe, and one common way to use libev with
		402	threads is indeed to create one loop per thread, and using the default
		403	loop in the "main" or "initial" thread.
325		404
326	The flags argument can be used to specify special behaviour or specific	405	The flags argument can be used to specify special behaviour or specific
327	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	406	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
328		407
329	The following flags are supported:	408	The following flags are supported:
…		…
339		418
340	If this flag bit is or'ed into the flag value (or the program runs setuid	419	If this flag bit is or'ed into the flag value (or the program runs setuid
341	or setgid) then libev will I<not> look at the environment variable	420	or setgid) then libev will I<not> look at the environment variable
342	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will	421	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will
343	override the flags completely if it is found in the environment. This is	422	override the flags completely if it is found in the environment. This is
344	useful to try out specific backends to test their performance, or to work	423	useful to try out specific backends to test their performance, to work
345	around bugs.	424	around bugs, or to make libev threadsafe (accessing environment variables
		425	cannot be done in a threadsafe way, but usually it works if no other
		426	thread modifies them).
346		427
347	=item C<EVFLAG_FORKCHECK>	428	=item C<EVFLAG_FORKCHECK>
348		429
349	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after	430	Instead of calling C<ev_loop_fork> manually after a fork, you can also
350	a fork, you can also make libev check for a fork in each iteration by	431	make libev check for a fork in each iteration by enabling this flag.
351	enabling this flag.
352		432
353	This works by calling C<getpid ()> on every iteration of the loop,	433	This works by calling C<getpid ()> on every iteration of the loop,
354	and thus this might slow down your event loop if you do a lot of loop	434	and thus this might slow down your event loop if you do a lot of loop
355	iterations and little real work, but is usually not noticeable (on my	435	iterations and little real work, but is usually not noticeable (on my
356	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence	436	GNU/Linux system for example, C<getpid> is actually a simple 5-insn
357	without a system call and thus I<very> fast, but my GNU/Linux system also has	437	sequence without a system call and thus I<very> fast, but my GNU/Linux
358	C<pthread_atfork> which is even faster).	438	system also has C<pthread_atfork> which is even faster). (Update: glibc
		439	versions 2.25 apparently removed the C<getpid> optimisation again).
359		440
360	The big advantage of this flag is that you can forget about fork (and	441	The big advantage of this flag is that you can forget about fork (and
361	forget about forgetting to tell libev about forking) when you use this	442	forget about forgetting to tell libev about forking, although you still
362	flag.	443	have to ignore C<SIGPIPE>) when you use this flag.
363		444
364	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>	445	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>
365	environment variable.	446	environment variable.
		447
		448	=item C<EVFLAG_NOINOTIFY>
		449
		450	When this flag is specified, then libev will not attempt to use the
		451	I<inotify> API for its C<ev_stat> watchers. Apart from debugging and
		452	testing, this flag can be useful to conserve inotify file descriptors, as
		453	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.
		454
		455	=item C<EVFLAG_SIGNALFD>
		456
		457	When this flag is specified, then libev will attempt to use the
		458	I<signalfd> API for its C<ev_signal> (and C<ev_child>) watchers. This API
		459	delivers signals synchronously, which makes it both faster and might make
		460	it possible to get the queued signal data. It can also simplify signal
		461	handling with threads, as long as you properly block signals in your
		462	threads that are not interested in handling them.
		463
		464	Signalfd will not be used by default as this changes your signal mask, and
		465	there are a lot of shoddy libraries and programs (glib's threadpool for
		466	example) that can't properly initialise their signal masks.
		467
		468	=item C<EVFLAG_NOSIGMASK>
		469
		470	When this flag is specified, then libev will avoid to modify the signal
		471	mask. Specifically, this means you have to make sure signals are unblocked
		472	when you want to receive them.
		473
		474	This behaviour is useful when you want to do your own signal handling, or
		475	want to handle signals only in specific threads and want to avoid libev
		476	unblocking the signals.
		477
		478	It's also required by POSIX in a threaded program, as libev calls
		479	C<sigprocmask>, whose behaviour is officially unspecified.
		480
		481	This flag's behaviour will become the default in future versions of libev.
366		482
367	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	483	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
368		484
369	This is your standard select(2) backend. Not I<completely> standard, as	485	This is your standard select(2) backend. Not I<completely> standard, as
370	libev tries to roll its own fd_set with no limits on the number of fds,	486	libev tries to roll its own fd_set with no limits on the number of fds,
…		…
395	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and	511	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and
396	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.	512	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.
397		513
398	=item C<EVBACKEND_EPOLL> (value 4, Linux)	514	=item C<EVBACKEND_EPOLL> (value 4, Linux)
399		515
		516	Use the Linux-specific epoll(7) interface (for both pre- and post-2.6.9
		517	kernels).
		518
400	For few fds, this backend is a bit little slower than poll and select,	519	For few fds, this backend is a bit little slower than poll and select, but
401	but it scales phenomenally better. While poll and select usually scale	520	it scales phenomenally better. While poll and select usually scale like
402	like O(total_fds) where n is the total number of fds (or the highest fd),	521	O(total_fds) where total_fds is the total number of fds (or the highest
403	epoll scales either O(1) or O(active_fds).	522	fd), epoll scales either O(1) or O(active_fds).
404		523
405	The epoll mechanism deserves honorable mention as the most misdesigned	524	The epoll mechanism deserves honorable mention as the most misdesigned
406	of the more advanced event mechanisms: mere annoyances include silently	525	of the more advanced event mechanisms: mere annoyances include silently
407	dropping file descriptors, requiring a system call per change per file	526	dropping file descriptors, requiring a system call per change per file
408	descriptor (and unnecessary guessing of parameters), problems with dup and	527	descriptor (and unnecessary guessing of parameters), problems with dup,
		528	returning before the timeout value, resulting in additional iterations
		529	(and only giving 5ms accuracy while select on the same platform gives
409	so on. The biggest issue is fork races, however - if a program forks then	530	0.1ms) and so on. The biggest issue is fork races, however - if a program
410	I<both> parent and child process have to recreate the epoll set, which can	531	forks then I<both> parent and child process have to recreate the epoll
411	take considerable time (one syscall per file descriptor) and is of course	532	set, which can take considerable time (one syscall per file descriptor)
412	hard to detect.	533	and is of course hard to detect.
413		534
414	Epoll is also notoriously buggy - embedding epoll fds I<should> work, but	535	Epoll is also notoriously buggy - embedding epoll fds I<should> work,
415	of course I<doesn't>, and epoll just loves to report events for totally	536	but of course I<doesn't>, and epoll just loves to report events for
416	I<different> file descriptors (even already closed ones, so one cannot	537	totally I<different> file descriptors (even already closed ones, so
417	even remove them from the set) than registered in the set (especially	538	one cannot even remove them from the set) than registered in the set
418	on SMP systems). Libev tries to counter these spurious notifications by	539	(especially on SMP systems). Libev tries to counter these spurious
419	employing an additional generation counter and comparing that against the	540	notifications by employing an additional generation counter and comparing
420	events to filter out spurious ones, recreating the set when required.	541	that against the events to filter out spurious ones, recreating the set
		542	when required. Epoll also erroneously rounds down timeouts, but gives you
		543	no way to know when and by how much, so sometimes you have to busy-wait
		544	because epoll returns immediately despite a nonzero timeout. And last
		545	not least, it also refuses to work with some file descriptors which work
		546	perfectly fine with C<select> (files, many character devices...).
		547
		548	Epoll is truly the train wreck among event poll mechanisms, a frankenpoll,
		549	cobbled together in a hurry, no thought to design or interaction with
		550	others. Oh, the pain, will it ever stop...
421		551
422	While stopping, setting and starting an I/O watcher in the same iteration	552	While stopping, setting and starting an I/O watcher in the same iteration
423	will result in some caching, there is still a system call per such	553	will result in some caching, there is still a system call per such
424	incident (because the same I<file descriptor> could point to a different	554	incident (because the same I<file descriptor> could point to a different
425	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed	555	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed
…		…
437	All this means that, in practice, C<EVBACKEND_SELECT> can be as fast or	567	All this means that, in practice, C<EVBACKEND_SELECT> can be as fast or
438	faster than epoll for maybe up to a hundred file descriptors, depending on	568	faster than epoll for maybe up to a hundred file descriptors, depending on
439	the usage. So sad.	569	the usage. So sad.
440		570
441	While nominally embeddable in other event loops, this feature is broken in	571	While nominally embeddable in other event loops, this feature is broken in
442	all kernel versions tested so far.	572	a lot of kernel revisions, but probably(!) works in current versions.
443		573
444	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as	574	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
445	C<EVBACKEND_POLL>.	575	C<EVBACKEND_POLL>.
446		576
		577	=item C<EVBACKEND_LINUXAIO> (value 64, Linux)
		578
		579	Use the Linux-specific Linux AIO (I<not> C<< aio(7) >> but C<<
		580	io_submit(2) >>) event interface available in post-4.18 kernels (but libev
		581	only tries to use it in 4.19+).
		582
		583	This is another Linux train wreck of an event interface.
		584
		585	If this backend works for you (as of this writing, it was very
		586	experimental), it is the best event interface available on Linux and might
		587	be well worth enabling it - if it isn't available in your kernel this will
		588	be detected and this backend will be skipped.
		589
		590	This backend can batch oneshot requests and supports a user-space ring
		591	buffer to receive events. It also doesn't suffer from most of the design
		592	problems of epoll (such as not being able to remove event sources from
		593	the epoll set), and generally sounds too good to be true. Because, this
		594	being the Linux kernel, of course it suffers from a whole new set of
		595	limitations, forcing you to fall back to epoll, inheriting all its design
		596	issues.
		597
		598	For one, it is not easily embeddable (but probably could be done using
		599	an event fd at some extra overhead). It also is subject to a system wide
		600	limit that can be configured in F</proc/sys/fs/aio-max-nr>. If no AIO
		601	requests are left, this backend will be skipped during initialisation, and
		602	will switch to epoll when the loop is active.
		603
		604	Most problematic in practice, however, is that not all file descriptors
		605	work with it. For example, in Linux 5.1, TCP sockets, pipes, event fds,
		606	files, F</dev/null> and many others are supported, but ttys do not work
		607	properly (a known bug that the kernel developers don't care about, see
		608	L<https://lore.kernel.org/patchwork/patch/1047453/>), so this is not
		609	(yet?) a generic event polling interface.
		610
		611	Overall, it seems the Linux developers just don't want it to have a
		612	generic event handling mechanism other than C<select> or C<poll>.
		613
		614	To work around all these problem, the current version of libev uses its
		615	epoll backend as a fallback for file descriptor types that do not work. Or
		616	falls back completely to epoll if the kernel acts up.
		617
		618	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
		619	C<EVBACKEND_POLL>.
		620
447	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	621	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
448		622
449	Kqueue deserves special mention, as at the time of this writing, it	623	Kqueue deserves special mention, as at the time this backend was
450	was broken on all BSDs except NetBSD (usually it doesn't work reliably	624	implemented, it was broken on all BSDs except NetBSD (usually it doesn't
451	with anything but sockets and pipes, except on Darwin, where of course	625	work reliably with anything but sockets and pipes, except on Darwin,
452	it's completely useless). Unlike epoll, however, whose brokenness	626	where of course it's completely useless). Unlike epoll, however, whose
453	is by design, these kqueue bugs can (and eventually will) be fixed	627	brokenness is by design, these kqueue bugs can be (and mostly have been)
454	without API changes to existing programs. For this reason it's not being	628	fixed without API changes to existing programs. For this reason it's not
455	"auto-detected" unless you explicitly specify it in the flags (i.e. using	629	being "auto-detected" on all platforms unless you explicitly specify it
456	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)	630	in the flags (i.e. using C<EVBACKEND_KQUEUE>) or libev was compiled on a
457	system like NetBSD.	631	known-to-be-good (-enough) system like NetBSD.
458		632
459	You still can embed kqueue into a normal poll or select backend and use it	633	You still can embed kqueue into a normal poll or select backend and use it
460	only for sockets (after having made sure that sockets work with kqueue on	634	only for sockets (after having made sure that sockets work with kqueue on
461	the target platform). See C<ev_embed> watchers for more info.	635	the target platform). See C<ev_embed> watchers for more info.
462		636
463	It scales in the same way as the epoll backend, but the interface to the	637	It scales in the same way as the epoll backend, but the interface to the
464	kernel is more efficient (which says nothing about its actual speed, of	638	kernel is more efficient (which says nothing about its actual speed, of
465	course). While stopping, setting and starting an I/O watcher does never	639	course). While stopping, setting and starting an I/O watcher does never
466	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to	640	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to
467	two event changes per incident. Support for C<fork ()> is very bad (but	641	two event changes per incident. Support for C<fork ()> is very bad (you
468	sane, unlike epoll) and it drops fds silently in similarly hard-to-detect	642	might have to leak fds on fork, but it's more sane than epoll) and it
469	cases	643	drops fds silently in similarly hard-to-detect cases.
470		644
471	This backend usually performs well under most conditions.	645	This backend usually performs well under most conditions.
472		646
473	While nominally embeddable in other event loops, this doesn't work	647	While nominally embeddable in other event loops, this doesn't work
474	everywhere, so you might need to test for this. And since it is broken	648	everywhere, so you might need to test for this. And since it is broken
…		…
491	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	665	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
492		666
493	This uses the Solaris 10 event port mechanism. As with everything on Solaris,	667	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
494	it's really slow, but it still scales very well (O(active_fds)).	668	it's really slow, but it still scales very well (O(active_fds)).
495		669
496	Please note that Solaris event ports can deliver a lot of spurious
497	notifications, so you need to use non-blocking I/O or other means to avoid
498	blocking when no data (or space) is available.
499
500	While this backend scales well, it requires one system call per active	670	While this backend scales well, it requires one system call per active
501	file descriptor per loop iteration. For small and medium numbers of file	671	file descriptor per loop iteration. For small and medium numbers of file
502	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend	672	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
503	might perform better.	673	might perform better.
504		674
505	On the positive side, with the exception of the spurious readiness	675	On the positive side, this backend actually performed fully to
506	notifications, this backend actually performed fully to specification
507	in all tests and is fully embeddable, which is a rare feat among the	676	specification in all tests and is fully embeddable, which is a rare feat
508	OS-specific backends (I vastly prefer correctness over speed hacks).	677	among the OS-specific backends (I vastly prefer correctness over speed
		678	hacks).
		679
		680	On the negative side, the interface is I<bizarre> - so bizarre that
		681	even sun itself gets it wrong in their code examples: The event polling
		682	function sometimes returns events to the caller even though an error
		683	occurred, but with no indication whether it has done so or not (yes, it's
		684	even documented that way) - deadly for edge-triggered interfaces where you
		685	absolutely have to know whether an event occurred or not because you have
		686	to re-arm the watcher.
		687
		688	Fortunately libev seems to be able to work around these idiocies.
509		689
510	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as	690	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
511	C<EVBACKEND_POLL>.	691	C<EVBACKEND_POLL>.
512		692
513	=item C<EVBACKEND_ALL>	693	=item C<EVBACKEND_ALL>
514		694
515	Try all backends (even potentially broken ones that wouldn't be tried	695	Try all backends (even potentially broken ones that wouldn't be tried
516	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	696	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
517	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	697	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
518		698
519	It is definitely not recommended to use this flag.	699	It is definitely not recommended to use this flag, use whatever
		700	C<ev_recommended_backends ()> returns, or simply do not specify a backend
		701	at all.
		702
		703	=item C<EVBACKEND_MASK>
		704
		705	Not a backend at all, but a mask to select all backend bits from a
		706	C<flags> value, in case you want to mask out any backends from a flags
		707	value (e.g. when modifying the C<LIBEV_FLAGS> environment variable).
520		708
521	=back	709	=back
522		710
523	If one or more of these are or'ed into the flags value, then only these	711	If one or more of the backend flags are or'ed into the flags value,
524	backends will be tried (in the reverse order as listed here). If none are	712	then only these backends will be tried (in the reverse order as listed
525	specified, all backends in C<ev_recommended_backends ()> will be tried.	713	here). If none are specified, all backends in C<ev_recommended_backends
526		714	()> will be tried.
527	Example: This is the most typical usage.
528
529	if (!ev_default_loop (0))
530	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
531
532	Example: Restrict libev to the select and poll backends, and do not allow
533	environment settings to be taken into account:
534
535	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
536
537	Example: Use whatever libev has to offer, but make sure that kqueue is
538	used if available (warning, breaks stuff, best use only with your own
539	private event loop and only if you know the OS supports your types of
540	fds):
541
542	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
543
544	=item struct ev_loop *ev_loop_new (unsigned int flags)
545
546	Similar to C<ev_default_loop>, but always creates a new event loop that is
547	always distinct from the default loop. Unlike the default loop, it cannot
548	handle signal and child watchers, and attempts to do so will be greeted by
549	undefined behaviour (or a failed assertion if assertions are enabled).
550
551	Note that this function I<is> thread-safe, and the recommended way to use
552	libev with threads is indeed to create one loop per thread, and using the
553	default loop in the "main" or "initial" thread.
554		715
555	Example: Try to create a event loop that uses epoll and nothing else.	716	Example: Try to create a event loop that uses epoll and nothing else.
556		717
557	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	718	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
558	if (!epoller)	719	if (!epoller)
559	fatal ("no epoll found here, maybe it hides under your chair");	720	fatal ("no epoll found here, maybe it hides under your chair");
560		721
		722	Example: Use whatever libev has to offer, but make sure that kqueue is
		723	used if available.
		724
		725	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_KQUEUE);
		726
		727	Example: Similarly, on linux, you mgiht want to take advantage of the
		728	linux aio backend if possible, but fall back to something else if that
		729	isn't available.
		730
		731	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_LINUXAIO);
		732
561	=item ev_default_destroy ()	733	=item ev_loop_destroy (loop)
562		734
563	Destroys the default loop again (frees all memory and kernel state	735	Destroys an event loop object (frees all memory and kernel state
564	etc.). None of the active event watchers will be stopped in the normal	736	etc.). None of the active event watchers will be stopped in the normal
565	sense, so e.g. C<ev_is_active> might still return true. It is your	737	sense, so e.g. C<ev_is_active> might still return true. It is your
566	responsibility to either stop all watchers cleanly yourself I<before>	738	responsibility to either stop all watchers cleanly yourself I<before>
567	calling this function, or cope with the fact afterwards (which is usually	739	calling this function, or cope with the fact afterwards (which is usually
568	the easiest thing, you can just ignore the watchers and/or C<free ()> them	740	the easiest thing, you can just ignore the watchers and/or C<free ()> them
…		…
570		742
571	Note that certain global state, such as signal state (and installed signal	743	Note that certain global state, such as signal state (and installed signal
572	handlers), will not be freed by this function, and related watchers (such	744	handlers), will not be freed by this function, and related watchers (such
573	as signal and child watchers) would need to be stopped manually.	745	as signal and child watchers) would need to be stopped manually.
574		746
575	In general it is not advisable to call this function except in the	747	This function is normally used on loop objects allocated by
576	rare occasion where you really need to free e.g. the signal handling	748	C<ev_loop_new>, but it can also be used on the default loop returned by
		749	C<ev_default_loop>, in which case it is not thread-safe.
		750
		751	Note that it is not advisable to call this function on the default loop
		752	except in the rare occasion where you really need to free its resources.
577	pipe fds. If you need dynamically allocated loops it is better to use	753	If you need dynamically allocated loops it is better to use C<ev_loop_new>
578	C<ev_loop_new> and C<ev_loop_destroy>).	754	and C<ev_loop_destroy>.
579		755
580	=item ev_loop_destroy (loop)	756	=item ev_loop_fork (loop)
581		757
582	Like C<ev_default_destroy>, but destroys an event loop created by an
583	earlier call to C<ev_loop_new>.
584
585	=item ev_default_fork ()
586
587	This function sets a flag that causes subsequent C<ev_loop> iterations	758	This function sets a flag that causes subsequent C<ev_run> iterations
588	to reinitialise the kernel state for backends that have one. Despite the	759	to reinitialise the kernel state for backends that have one. Despite
589	name, you can call it anytime, but it makes most sense after forking, in	760	the name, you can call it anytime you are allowed to start or stop
590	the child process (or both child and parent, but that again makes little	761	watchers (except inside an C<ev_prepare> callback), but it makes most
591	sense). You I<must> call it in the child before using any of the libev	762	sense after forking, in the child process. You I<must> call it (or use
592	functions, and it will only take effect at the next C<ev_loop> iteration.	763	C<EVFLAG_FORKCHECK>) in the child before resuming or calling C<ev_run>.
		764
		765	In addition, if you want to reuse a loop (via this function or
		766	C<EVFLAG_FORKCHECK>), you I<also> have to ignore C<SIGPIPE>.
		767
		768	Again, you I<have> to call it on I<any> loop that you want to re-use after
		769	a fork, I<even if you do not plan to use the loop in the parent>. This is
		770	because some kernel interfaces *cough* I<kqueue> *cough* do funny things
		771	during fork.
593		772
594	On the other hand, you only need to call this function in the child	773	On the other hand, you only need to call this function in the child
595	process if and only if you want to use the event library in the child. If	774	process if and only if you want to use the event loop in the child. If
596	you just fork+exec, you don't have to call it at all.	775	you just fork+exec or create a new loop in the child, you don't have to
		776	call it at all (in fact, C<epoll> is so badly broken that it makes a
		777	difference, but libev will usually detect this case on its own and do a
		778	costly reset of the backend).
597		779
598	The function itself is quite fast and it's usually not a problem to call	780	The function itself is quite fast and it's usually not a problem to call
599	it just in case after a fork. To make this easy, the function will fit in	781	it just in case after a fork.
600	quite nicely into a call to C<pthread_atfork>:
601		782
		783	Example: Automate calling C<ev_loop_fork> on the default loop when
		784	using pthreads.
		785
		786	static void
		787	post_fork_child (void)
		788	{
		789	ev_loop_fork (EV_DEFAULT);
		790	}
		791
		792	...
602	pthread_atfork (0, 0, ev_default_fork);	793	pthread_atfork (0, 0, post_fork_child);
603
604	=item ev_loop_fork (loop)
605
606	Like C<ev_default_fork>, but acts on an event loop created by
607	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
608	after fork that you want to re-use in the child, and how you do this is
609	entirely your own problem.
610		794
611	=item int ev_is_default_loop (loop)	795	=item int ev_is_default_loop (loop)
612		796
613	Returns true when the given loop is, in fact, the default loop, and false	797	Returns true when the given loop is, in fact, the default loop, and false
614	otherwise.	798	otherwise.
615		799
616	=item unsigned int ev_loop_count (loop)	800	=item unsigned int ev_iteration (loop)
617		801
618	Returns the count of loop iterations for the loop, which is identical to	802	Returns the current iteration count for the event loop, which is identical
619	the number of times libev did poll for new events. It starts at C<0> and	803	to the number of times libev did poll for new events. It starts at C<0>
620	happily wraps around with enough iterations.	804	and happily wraps around with enough iterations.
621		805
622	This value can sometimes be useful as a generation counter of sorts (it	806	This value can sometimes be useful as a generation counter of sorts (it
623	"ticks" the number of loop iterations), as it roughly corresponds with	807	"ticks" the number of loop iterations), as it roughly corresponds with
624	C<ev_prepare> and C<ev_check> calls.	808	C<ev_prepare> and C<ev_check> calls - and is incremented between the
		809	prepare and check phases.
625		810
626	=item unsigned int ev_loop_depth (loop)	811	=item unsigned int ev_depth (loop)
627		812
628	Returns the number of times C<ev_loop> was entered minus the number of	813	Returns the number of times C<ev_run> was entered minus the number of
629	times C<ev_loop> was exited, in other words, the recursion depth.	814	times C<ev_run> was exited normally, in other words, the recursion depth.
630		815
631	Outside C<ev_loop>, this number is zero. In a callback, this number is	816	Outside C<ev_run>, this number is zero. In a callback, this number is
632	C<1>, unless C<ev_loop> was invoked recursively (or from another thread),	817	C<1>, unless C<ev_run> was invoked recursively (or from another thread),
633	in which case it is higher.	818	in which case it is higher.
634		819
635	Leaving C<ev_loop> abnormally (setjmp/longjmp, cancelling the thread	820	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread,
636	etc.), doesn't count as exit.	821	throwing an exception etc.), doesn't count as "exit" - consider this
		822	as a hint to avoid such ungentleman-like behaviour unless it's really
		823	convenient, in which case it is fully supported.
637		824
638	=item unsigned int ev_backend (loop)	825	=item unsigned int ev_backend (loop)
639		826
640	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	827	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
641	use.	828	use.
…		…
650		837
651	=item ev_now_update (loop)	838	=item ev_now_update (loop)
652		839
653	Establishes the current time by querying the kernel, updating the time	840	Establishes the current time by querying the kernel, updating the time
654	returned by C<ev_now ()> in the progress. This is a costly operation and	841	returned by C<ev_now ()> in the progress. This is a costly operation and
655	is usually done automatically within C<ev_loop ()>.	842	is usually done automatically within C<ev_run ()>.
656		843
657	This function is rarely useful, but when some event callback runs for a	844	This function is rarely useful, but when some event callback runs for a
658	very long time without entering the event loop, updating libev's idea of	845	very long time without entering the event loop, updating libev's idea of
659	the current time is a good idea.	846	the current time is a good idea.
660		847
661	See also L<The special problem of time updates> in the C<ev_timer> section.	848	See also L</The special problem of time updates> in the C<ev_timer> section.
662		849
663	=item ev_suspend (loop)	850	=item ev_suspend (loop)
664		851
665	=item ev_resume (loop)	852	=item ev_resume (loop)
666		853
667	These two functions suspend and resume a loop, for use when the loop is	854	These two functions suspend and resume an event loop, for use when the
668	not used for a while and timeouts should not be processed.	855	loop is not used for a while and timeouts should not be processed.
669		856
670	A typical use case would be an interactive program such as a game: When	857	A typical use case would be an interactive program such as a game: When
671	the user presses C<^Z> to suspend the game and resumes it an hour later it	858	the user presses C<^Z> to suspend the game and resumes it an hour later it
672	would be best to handle timeouts as if no time had actually passed while	859	would be best to handle timeouts as if no time had actually passed while
673	the program was suspended. This can be achieved by calling C<ev_suspend>	860	the program was suspended. This can be achieved by calling C<ev_suspend>
…		…
675	C<ev_resume> directly afterwards to resume timer processing.	862	C<ev_resume> directly afterwards to resume timer processing.
676		863
677	Effectively, all C<ev_timer> watchers will be delayed by the time spend	864	Effectively, all C<ev_timer> watchers will be delayed by the time spend
678	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers	865	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers
679	will be rescheduled (that is, they will lose any events that would have	866	will be rescheduled (that is, they will lose any events that would have
680	occured while suspended).	867	occurred while suspended).
681		868
682	After calling C<ev_suspend> you B<must not> call I<any> function on the	869	After calling C<ev_suspend> you B<must not> call I<any> function on the
683	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>	870	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>
684	without a previous call to C<ev_suspend>.	871	without a previous call to C<ev_suspend>.
685		872
686	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the	873	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the
687	event loop time (see C<ev_now_update>).	874	event loop time (see C<ev_now_update>).
688		875
689	=item ev_loop (loop, int flags)	876	=item bool ev_run (loop, int flags)
690		877
691	Finally, this is it, the event handler. This function usually is called	878	Finally, this is it, the event handler. This function usually is called
692	after you initialised all your watchers and you want to start handling	879	after you have initialised all your watchers and you want to start
693	events.	880	handling events. It will ask the operating system for any new events, call
		881	the watcher callbacks, and then repeat the whole process indefinitely: This
		882	is why event loops are called I<loops>.
694		883
695	If the flags argument is specified as C<0>, it will not return until	884	If the flags argument is specified as C<0>, it will keep handling events
696	either no event watchers are active anymore or C<ev_unloop> was called.	885	until either no event watchers are active anymore or C<ev_break> was
		886	called.
697		887
		888	The return value is false if there are no more active watchers (which
		889	usually means "all jobs done" or "deadlock"), and true in all other cases
		890	(which usually means " you should call C<ev_run> again").
		891
698	Please note that an explicit C<ev_unloop> is usually better than	892	Please note that an explicit C<ev_break> is usually better than
699	relying on all watchers to be stopped when deciding when a program has	893	relying on all watchers to be stopped when deciding when a program has
700	finished (especially in interactive programs), but having a program	894	finished (especially in interactive programs), but having a program
701	that automatically loops as long as it has to and no longer by virtue	895	that automatically loops as long as it has to and no longer by virtue
702	of relying on its watchers stopping correctly, that is truly a thing of	896	of relying on its watchers stopping correctly, that is truly a thing of
703	beauty.	897	beauty.
704		898
		899	This function is I<mostly> exception-safe - you can break out of a
		900	C<ev_run> call by calling C<longjmp> in a callback, throwing a C++
		901	exception and so on. This does not decrement the C<ev_depth> value, nor
		902	will it clear any outstanding C<EVBREAK_ONE> breaks.
		903
705	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle	904	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle
706	those events and any already outstanding ones, but will not block your	905	those events and any already outstanding ones, but will not wait and
707	process in case there are no events and will return after one iteration of	906	block your process in case there are no events and will return after one
708	the loop.	907	iteration of the loop. This is sometimes useful to poll and handle new
		908	events while doing lengthy calculations, to keep the program responsive.
709		909
710	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if	910	A flags value of C<EVRUN_ONCE> will look for new events (waiting if
711	necessary) and will handle those and any already outstanding ones. It	911	necessary) and will handle those and any already outstanding ones. It
712	will block your process until at least one new event arrives (which could	912	will block your process until at least one new event arrives (which could
713	be an event internal to libev itself, so there is no guarantee that a	913	be an event internal to libev itself, so there is no guarantee that a
714	user-registered callback will be called), and will return after one	914	user-registered callback will be called), and will return after one
715	iteration of the loop.	915	iteration of the loop.
716		916
717	This is useful if you are waiting for some external event in conjunction	917	This is useful if you are waiting for some external event in conjunction
718	with something not expressible using other libev watchers (i.e. "roll your	918	with something not expressible using other libev watchers (i.e. "roll your
719	own C<ev_loop>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is	919	own C<ev_run>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is
720	usually a better approach for this kind of thing.	920	usually a better approach for this kind of thing.
721		921
722	Here are the gory details of what C<ev_loop> does:	922	Here are the gory details of what C<ev_run> does (this is for your
		923	understanding, not a guarantee that things will work exactly like this in
		924	future versions):
723		925
		926	- Increment loop depth.
		927	- Reset the ev_break status.
724	- Before the first iteration, call any pending watchers.	928	- Before the first iteration, call any pending watchers.
		929	LOOP:
725	* If EVFLAG_FORKCHECK was used, check for a fork.	930	- If EVFLAG_FORKCHECK was used, check for a fork.
726	- If a fork was detected (by any means), queue and call all fork watchers.	931	- If a fork was detected (by any means), queue and call all fork watchers.
727	- Queue and call all prepare watchers.	932	- Queue and call all prepare watchers.
		933	- If ev_break was called, goto FINISH.
728	- If we have been forked, detach and recreate the kernel state	934	- If we have been forked, detach and recreate the kernel state
729	as to not disturb the other process.	935	as to not disturb the other process.
730	- Update the kernel state with all outstanding changes.	936	- Update the kernel state with all outstanding changes.
731	- Update the "event loop time" (ev_now ()).	937	- Update the "event loop time" (ev_now ()).
732	- Calculate for how long to sleep or block, if at all	938	- Calculate for how long to sleep or block, if at all
733	(active idle watchers, EVLOOP_NONBLOCK or not having	939	(active idle watchers, EVRUN_NOWAIT or not having
734	any active watchers at all will result in not sleeping).	940	any active watchers at all will result in not sleeping).
735	- Sleep if the I/O and timer collect interval say so.	941	- Sleep if the I/O and timer collect interval say so.
		942	- Increment loop iteration counter.
736	- Block the process, waiting for any events.	943	- Block the process, waiting for any events.
737	- Queue all outstanding I/O (fd) events.	944	- Queue all outstanding I/O (fd) events.
738	- Update the "event loop time" (ev_now ()), and do time jump adjustments.	945	- Update the "event loop time" (ev_now ()), and do time jump adjustments.
739	- Queue all expired timers.	946	- Queue all expired timers.
740	- Queue all expired periodics.	947	- Queue all expired periodics.
741	- Unless any events are pending now, queue all idle watchers.	948	- Queue all idle watchers with priority higher than that of pending events.
742	- Queue all check watchers.	949	- Queue all check watchers.
743	- Call all queued watchers in reverse order (i.e. check watchers first).	950	- Call all queued watchers in reverse order (i.e. check watchers first).
744	Signals and child watchers are implemented as I/O watchers, and will	951	Signals and child watchers are implemented as I/O watchers, and will
745	be handled here by queueing them when their watcher gets executed.	952	be handled here by queueing them when their watcher gets executed.
746	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	953	- If ev_break has been called, or EVRUN_ONCE or EVRUN_NOWAIT
747	were used, or there are no active watchers, return, otherwise	954	were used, or there are no active watchers, goto FINISH, otherwise
748	continue with step *.	955	continue with step LOOP.
		956	FINISH:
		957	- Reset the ev_break status iff it was EVBREAK_ONE.
		958	- Decrement the loop depth.
		959	- Return.
749		960
750	Example: Queue some jobs and then loop until no events are outstanding	961	Example: Queue some jobs and then loop until no events are outstanding
751	anymore.	962	anymore.
752		963
753	... queue jobs here, make sure they register event watchers as long	964	... queue jobs here, make sure they register event watchers as long
754	... as they still have work to do (even an idle watcher will do..)	965	... as they still have work to do (even an idle watcher will do..)
755	ev_loop (my_loop, 0);	966	ev_run (my_loop, 0);
756	... jobs done or somebody called unloop. yeah!	967	... jobs done or somebody called break. yeah!
757		968
758	=item ev_unloop (loop, how)	969	=item ev_break (loop, how)
759		970
760	Can be used to make a call to C<ev_loop> return early (but only after it	971	Can be used to make a call to C<ev_run> return early (but only after it
761	has processed all outstanding events). The C<how> argument must be either	972	has processed all outstanding events). The C<how> argument must be either
762	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	973	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or
763	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	974	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.
764		975
765	This "unloop state" will be cleared when entering C<ev_loop> again.	976	This "break state" will be cleared on the next call to C<ev_run>.
766		977
767	It is safe to call C<ev_unloop> from otuside any C<ev_loop> calls.	978	It is safe to call C<ev_break> from outside any C<ev_run> calls, too, in
		979	which case it will have no effect.
768		980
769	=item ev_ref (loop)	981	=item ev_ref (loop)
770		982
771	=item ev_unref (loop)	983	=item ev_unref (loop)
772		984
773	Ref/unref can be used to add or remove a reference count on the event	985	Ref/unref can be used to add or remove a reference count on the event
774	loop: Every watcher keeps one reference, and as long as the reference	986	loop: Every watcher keeps one reference, and as long as the reference
775	count is nonzero, C<ev_loop> will not return on its own.	987	count is nonzero, C<ev_run> will not return on its own.
776		988
777	If you have a watcher you never unregister that should not keep C<ev_loop>	989	This is useful when you have a watcher that you never intend to
778	from returning, call ev_unref() after starting, and ev_ref() before	990	unregister, but that nevertheless should not keep C<ev_run> from
		991	returning. In such a case, call C<ev_unref> after starting, and C<ev_ref>
779	stopping it.	992	before stopping it.
780		993
781	As an example, libev itself uses this for its internal signal pipe: It	994	As an example, libev itself uses this for its internal signal pipe: It
782	is not visible to the libev user and should not keep C<ev_loop> from	995	is not visible to the libev user and should not keep C<ev_run> from
783	exiting if no event watchers registered by it are active. It is also an	996	exiting if no event watchers registered by it are active. It is also an
784	excellent way to do this for generic recurring timers or from within	997	excellent way to do this for generic recurring timers or from within
785	third-party libraries. Just remember to I<unref after start> and I<ref	998	third-party libraries. Just remember to I<unref after start> and I<ref
786	before stop> (but only if the watcher wasn't active before, or was active	999	before stop> (but only if the watcher wasn't active before, or was active
787	before, respectively. Note also that libev might stop watchers itself	1000	before, respectively. Note also that libev might stop watchers itself
788	(e.g. non-repeating timers) in which case you have to C<ev_ref>	1001	(e.g. non-repeating timers) in which case you have to C<ev_ref>
789	in the callback).	1002	in the callback).
790		1003
791	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	1004	Example: Create a signal watcher, but keep it from keeping C<ev_run>
792	running when nothing else is active.	1005	running when nothing else is active.
793		1006
794	ev_signal exitsig;	1007	ev_signal exitsig;
795	ev_signal_init (&exitsig, sig_cb, SIGINT);	1008	ev_signal_init (&exitsig, sig_cb, SIGINT);
796	ev_signal_start (loop, &exitsig);	1009	ev_signal_start (loop, &exitsig);
797	evf_unref (loop);	1010	ev_unref (loop);
798		1011
799	Example: For some weird reason, unregister the above signal handler again.	1012	Example: For some weird reason, unregister the above signal handler again.
800		1013
801	ev_ref (loop);	1014	ev_ref (loop);
802	ev_signal_stop (loop, &exitsig);	1015	ev_signal_stop (loop, &exitsig);
…		…
822	overhead for the actual polling but can deliver many events at once.	1035	overhead for the actual polling but can deliver many events at once.
823		1036
824	By setting a higher I<io collect interval> you allow libev to spend more	1037	By setting a higher I<io collect interval> you allow libev to spend more
825	time collecting I/O events, so you can handle more events per iteration,	1038	time collecting I/O events, so you can handle more events per iteration,
826	at the cost of increasing latency. Timeouts (both C<ev_periodic> and	1039	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
827	C<ev_timer>) will be not affected. Setting this to a non-null value will	1040	C<ev_timer>) will not be affected. Setting this to a non-null value will
828	introduce an additional C<ev_sleep ()> call into most loop iterations. The	1041	introduce an additional C<ev_sleep ()> call into most loop iterations. The
829	sleep time ensures that libev will not poll for I/O events more often then	1042	sleep time ensures that libev will not poll for I/O events more often then
830	once per this interval, on average.	1043	once per this interval, on average (as long as the host time resolution is
		1044	good enough).
831		1045
832	Likewise, by setting a higher I<timeout collect interval> you allow libev	1046	Likewise, by setting a higher I<timeout collect interval> you allow libev
833	to spend more time collecting timeouts, at the expense of increased	1047	to spend more time collecting timeouts, at the expense of increased
834	latency/jitter/inexactness (the watcher callback will be called	1048	latency/jitter/inexactness (the watcher callback will be called
835	later). C<ev_io> watchers will not be affected. Setting this to a non-null	1049	later). C<ev_io> watchers will not be affected. Setting this to a non-null
…		…
841	usually doesn't make much sense to set it to a lower value than C<0.01>,	1055	usually doesn't make much sense to set it to a lower value than C<0.01>,
842	as this approaches the timing granularity of most systems. Note that if	1056	as this approaches the timing granularity of most systems. Note that if
843	you do transactions with the outside world and you can't increase the	1057	you do transactions with the outside world and you can't increase the
844	parallelity, then this setting will limit your transaction rate (if you	1058	parallelity, then this setting will limit your transaction rate (if you
845	need to poll once per transaction and the I/O collect interval is 0.01,	1059	need to poll once per transaction and the I/O collect interval is 0.01,
846	then you can't do more than 100 transations per second).	1060	then you can't do more than 100 transactions per second).
847		1061
848	Setting the I<timeout collect interval> can improve the opportunity for	1062	Setting the I<timeout collect interval> can improve the opportunity for
849	saving power, as the program will "bundle" timer callback invocations that	1063	saving power, as the program will "bundle" timer callback invocations that
850	are "near" in time together, by delaying some, thus reducing the number of	1064	are "near" in time together, by delaying some, thus reducing the number of
851	times the process sleeps and wakes up again. Another useful technique to	1065	times the process sleeps and wakes up again. Another useful technique to
…		…
856	more often than 100 times per second:	1070	more often than 100 times per second:
857		1071
858	ev_set_timeout_collect_interval (EV_DEFAULT_UC_ 0.1);	1072	ev_set_timeout_collect_interval (EV_DEFAULT_UC_ 0.1);
859	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);	1073	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);
860		1074
		1075	=item ev_invoke_pending (loop)
		1076
		1077	This call will simply invoke all pending watchers while resetting their
		1078	pending state. Normally, C<ev_run> does this automatically when required,
		1079	but when overriding the invoke callback this call comes handy. This
		1080	function can be invoked from a watcher - this can be useful for example
		1081	when you want to do some lengthy calculation and want to pass further
		1082	event handling to another thread (you still have to make sure only one
		1083	thread executes within C<ev_invoke_pending> or C<ev_run> of course).
		1084
		1085	=item int ev_pending_count (loop)
		1086
		1087	Returns the number of pending watchers - zero indicates that no watchers
		1088	are pending.
		1089
		1090	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))
		1091
		1092	This overrides the invoke pending functionality of the loop: Instead of
		1093	invoking all pending watchers when there are any, C<ev_run> will call
		1094	this callback instead. This is useful, for example, when you want to
		1095	invoke the actual watchers inside another context (another thread etc.).
		1096
		1097	If you want to reset the callback, use C<ev_invoke_pending> as new
		1098	callback.
		1099
		1100	=item ev_set_loop_release_cb (loop, void (*release)(EV_P) throw (), void (*acquire)(EV_P) throw ())
		1101
		1102	Sometimes you want to share the same loop between multiple threads. This
		1103	can be done relatively simply by putting mutex_lock/unlock calls around
		1104	each call to a libev function.
		1105
		1106	However, C<ev_run> can run an indefinite time, so it is not feasible
		1107	to wait for it to return. One way around this is to wake up the event
		1108	loop via C<ev_break> and C<ev_async_send>, another way is to set these
		1109	I<release> and I<acquire> callbacks on the loop.
		1110
		1111	When set, then C<release> will be called just before the thread is
		1112	suspended waiting for new events, and C<acquire> is called just
		1113	afterwards.
		1114
		1115	Ideally, C<release> will just call your mutex_unlock function, and
		1116	C<acquire> will just call the mutex_lock function again.
		1117
		1118	While event loop modifications are allowed between invocations of
		1119	C<release> and C<acquire> (that's their only purpose after all), no
		1120	modifications done will affect the event loop, i.e. adding watchers will
		1121	have no effect on the set of file descriptors being watched, or the time
		1122	waited. Use an C<ev_async> watcher to wake up C<ev_run> when you want it
		1123	to take note of any changes you made.
		1124
		1125	In theory, threads executing C<ev_run> will be async-cancel safe between
		1126	invocations of C<release> and C<acquire>.
		1127
		1128	See also the locking example in the C<THREADS> section later in this
		1129	document.
		1130
		1131	=item ev_set_userdata (loop, void *data)
		1132
		1133	=item void *ev_userdata (loop)
		1134
		1135	Set and retrieve a single C<void *> associated with a loop. When
		1136	C<ev_set_userdata> has never been called, then C<ev_userdata> returns
		1137	C<0>.
		1138
		1139	These two functions can be used to associate arbitrary data with a loop,
		1140	and are intended solely for the C<invoke_pending_cb>, C<release> and
		1141	C<acquire> callbacks described above, but of course can be (ab-)used for
		1142	any other purpose as well.
		1143
861	=item ev_loop_verify (loop)	1144	=item ev_verify (loop)
862		1145
863	This function only does something when C<EV_VERIFY> support has been	1146	This function only does something when C<EV_VERIFY> support has been
864	compiled in, which is the default for non-minimal builds. It tries to go	1147	compiled in, which is the default for non-minimal builds. It tries to go
865	through all internal structures and checks them for validity. If anything	1148	through all internal structures and checks them for validity. If anything
866	is found to be inconsistent, it will print an error message to standard	1149	is found to be inconsistent, it will print an error message to standard
…		…
877		1160
878	In the following description, uppercase C<TYPE> in names stands for the	1161	In the following description, uppercase C<TYPE> in names stands for the
879	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer	1162	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer
880	watchers and C<ev_io_start> for I/O watchers.	1163	watchers and C<ev_io_start> for I/O watchers.
881		1164
882	A watcher is a structure that you create and register to record your	1165	A watcher is an opaque structure that you allocate and register to record
883	interest in some event. For instance, if you want to wait for STDIN to	1166	your interest in some event. To make a concrete example, imagine you want
884	become readable, you would create an C<ev_io> watcher for that:	1167	to wait for STDIN to become readable, you would create an C<ev_io> watcher
		1168	for that:
885		1169
886	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)	1170	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)
887	{	1171	{
888	ev_io_stop (w);	1172	ev_io_stop (w);
889	ev_unloop (loop, EVUNLOOP_ALL);	1173	ev_break (loop, EVBREAK_ALL);
890	}	1174	}
891		1175
892	struct ev_loop *loop = ev_default_loop (0);	1176	struct ev_loop *loop = ev_default_loop (0);
893		1177
894	ev_io stdin_watcher;	1178	ev_io stdin_watcher;
895		1179
896	ev_init (&stdin_watcher, my_cb);	1180	ev_init (&stdin_watcher, my_cb);
897	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);	1181	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
898	ev_io_start (loop, &stdin_watcher);	1182	ev_io_start (loop, &stdin_watcher);
899		1183
900	ev_loop (loop, 0);	1184	ev_run (loop, 0);
901		1185
902	As you can see, you are responsible for allocating the memory for your	1186	As you can see, you are responsible for allocating the memory for your
903	watcher structures (and it is I<usually> a bad idea to do this on the	1187	watcher structures (and it is I<usually> a bad idea to do this on the
904	stack).	1188	stack).
905		1189
906	Each watcher has an associated watcher structure (called C<struct ev_TYPE>	1190	Each watcher has an associated watcher structure (called C<struct ev_TYPE>
907	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).	1191	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).
908		1192
909	Each watcher structure must be initialised by a call to C<ev_init	1193	Each watcher structure must be initialised by a call to C<ev_init (watcher
910	(watcher *, callback)>, which expects a callback to be provided. This	1194	*, callback)>, which expects a callback to be provided. This callback is
911	callback gets invoked each time the event occurs (or, in the case of I/O	1195	invoked each time the event occurs (or, in the case of I/O watchers, each
912	watchers, each time the event loop detects that the file descriptor given	1196	time the event loop detects that the file descriptor given is readable
913	is readable and/or writable).	1197	and/or writable).
914		1198
915	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>	1199	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>
916	macro to configure it, with arguments specific to the watcher type. There	1200	macro to configure it, with arguments specific to the watcher type. There
917	is also a macro to combine initialisation and setting in one call: C<<	1201	is also a macro to combine initialisation and setting in one call: C<<
918	ev_TYPE_init (watcher *, callback, ...) >>.	1202	ev_TYPE_init (watcher *, callback, ...) >>.
…		…
941	=item C<EV_WRITE>	1225	=item C<EV_WRITE>
942		1226
943	The file descriptor in the C<ev_io> watcher has become readable and/or	1227	The file descriptor in the C<ev_io> watcher has become readable and/or
944	writable.	1228	writable.
945		1229
946	=item C<EV_TIMEOUT>	1230	=item C<EV_TIMER>
947		1231
948	The C<ev_timer> watcher has timed out.	1232	The C<ev_timer> watcher has timed out.
949		1233
950	=item C<EV_PERIODIC>	1234	=item C<EV_PERIODIC>
951		1235
…		…
969		1253
970	=item C<EV_PREPARE>	1254	=item C<EV_PREPARE>
971		1255
972	=item C<EV_CHECK>	1256	=item C<EV_CHECK>
973		1257
974	All C<ev_prepare> watchers are invoked just I<before> C<ev_loop> starts	1258	All C<ev_prepare> watchers are invoked just I<before> C<ev_run> starts to
975	to gather new events, and all C<ev_check> watchers are invoked just after	1259	gather new events, and all C<ev_check> watchers are queued (not invoked)
976	C<ev_loop> has gathered them, but before it invokes any callbacks for any	1260	just after C<ev_run> has gathered them, but before it queues any callbacks
		1261	for any received events. That means C<ev_prepare> watchers are the last
		1262	watchers invoked before the event loop sleeps or polls for new events, and
		1263	C<ev_check> watchers will be invoked before any other watchers of the same
		1264	or lower priority within an event loop iteration.
		1265
977	received events. Callbacks of both watcher types can start and stop as	1266	Callbacks of both watcher types can start and stop as many watchers as
978	many watchers as they want, and all of them will be taken into account	1267	they want, and all of them will be taken into account (for example, a
979	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	1268	C<ev_prepare> watcher might start an idle watcher to keep C<ev_run> from
980	C<ev_loop> from blocking).	1269	blocking).
981		1270
982	=item C<EV_EMBED>	1271	=item C<EV_EMBED>
983		1272
984	The embedded event loop specified in the C<ev_embed> watcher needs attention.	1273	The embedded event loop specified in the C<ev_embed> watcher needs attention.
985		1274
986	=item C<EV_FORK>	1275	=item C<EV_FORK>
987		1276
988	The event loop has been resumed in the child process after fork (see	1277	The event loop has been resumed in the child process after fork (see
989	C<ev_fork>).	1278	C<ev_fork>).
		1279
		1280	=item C<EV_CLEANUP>
		1281
		1282	The event loop is about to be destroyed (see C<ev_cleanup>).
990		1283
991	=item C<EV_ASYNC>	1284	=item C<EV_ASYNC>
992		1285
993	The given async watcher has been asynchronously notified (see C<ev_async>).	1286	The given async watcher has been asynchronously notified (see C<ev_async>).
994		1287
…		…
1041		1334
1042	ev_io w;	1335	ev_io w;
1043	ev_init (&w, my_cb);	1336	ev_init (&w, my_cb);
1044	ev_io_set (&w, STDIN_FILENO, EV_READ);	1337	ev_io_set (&w, STDIN_FILENO, EV_READ);
1045		1338
1046	=item C<ev_TYPE_set> (ev_TYPE *, [args])	1339	=item C<ev_TYPE_set> (ev_TYPE *watcher, [args])
1047		1340
1048	This macro initialises the type-specific parts of a watcher. You need to	1341	This macro initialises the type-specific parts of a watcher. You need to
1049	call C<ev_init> at least once before you call this macro, but you can	1342	call C<ev_init> at least once before you call this macro, but you can
1050	call C<ev_TYPE_set> any number of times. You must not, however, call this	1343	call C<ev_TYPE_set> any number of times. You must not, however, call this
1051	macro on a watcher that is active (it can be pending, however, which is a	1344	macro on a watcher that is active (it can be pending, however, which is a
…		…
1064		1357
1065	Example: Initialise and set an C<ev_io> watcher in one step.	1358	Example: Initialise and set an C<ev_io> watcher in one step.
1066		1359
1067	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);	1360	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);
1068		1361
1069	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)	1362	=item C<ev_TYPE_start> (loop, ev_TYPE *watcher)
1070		1363
1071	Starts (activates) the given watcher. Only active watchers will receive	1364	Starts (activates) the given watcher. Only active watchers will receive
1072	events. If the watcher is already active nothing will happen.	1365	events. If the watcher is already active nothing will happen.
1073		1366
1074	Example: Start the C<ev_io> watcher that is being abused as example in this	1367	Example: Start the C<ev_io> watcher that is being abused as example in this
1075	whole section.	1368	whole section.
1076		1369
1077	ev_io_start (EV_DEFAULT_UC, &w);	1370	ev_io_start (EV_DEFAULT_UC, &w);
1078		1371
1079	=item C<ev_TYPE_stop> (loop *, ev_TYPE *watcher)	1372	=item C<ev_TYPE_stop> (loop, ev_TYPE *watcher)
1080		1373
1081	Stops the given watcher if active, and clears the pending status (whether	1374	Stops the given watcher if active, and clears the pending status (whether
1082	the watcher was active or not).	1375	the watcher was active or not).
1083		1376
1084	It is possible that stopped watchers are pending - for example,	1377	It is possible that stopped watchers are pending - for example,
…		…
1104		1397
1105	=item callback ev_cb (ev_TYPE *watcher)	1398	=item callback ev_cb (ev_TYPE *watcher)
1106		1399
1107	Returns the callback currently set on the watcher.	1400	Returns the callback currently set on the watcher.
1108		1401
1109	=item ev_cb_set (ev_TYPE *watcher, callback)	1402	=item ev_set_cb (ev_TYPE *watcher, callback)
1110		1403
1111	Change the callback. You can change the callback at virtually any time	1404	Change the callback. You can change the callback at virtually any time
1112	(modulo threads).	1405	(modulo threads).
1113		1406
1114	=item ev_set_priority (ev_TYPE *watcher, priority)	1407	=item ev_set_priority (ev_TYPE *watcher, int priority)
1115		1408
1116	=item int ev_priority (ev_TYPE *watcher)	1409	=item int ev_priority (ev_TYPE *watcher)
1117		1410
1118	Set and query the priority of the watcher. The priority is a small	1411	Set and query the priority of the watcher. The priority is a small
1119	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>	1412	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
…		…
1132	or might not have been clamped to the valid range.	1425	or might not have been clamped to the valid range.
1133		1426
1134	The default priority used by watchers when no priority has been set is	1427	The default priority used by watchers when no priority has been set is
1135	always C<0>, which is supposed to not be too high and not be too low :).	1428	always C<0>, which is supposed to not be too high and not be too low :).
1136		1429
1137	See L<WATCHER PRIORITY MODELS>, below, for a more thorough treatment of	1430	See L</WATCHER PRIORITY MODELS>, below, for a more thorough treatment of
1138	priorities.	1431	priorities.
1139		1432
1140	=item ev_invoke (loop, ev_TYPE *watcher, int revents)	1433	=item ev_invoke (loop, ev_TYPE *watcher, int revents)
1141		1434
1142	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither	1435	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
…		…
1151	watcher isn't pending it does nothing and returns C<0>.	1444	watcher isn't pending it does nothing and returns C<0>.
1152		1445
1153	Sometimes it can be useful to "poll" a watcher instead of waiting for its	1446	Sometimes it can be useful to "poll" a watcher instead of waiting for its
1154	callback to be invoked, which can be accomplished with this function.	1447	callback to be invoked, which can be accomplished with this function.
1155		1448
		1449	=item ev_feed_event (loop, ev_TYPE *watcher, int revents)
		1450
		1451	Feeds the given event set into the event loop, as if the specified event
		1452	had happened for the specified watcher (which must be a pointer to an
		1453	initialised but not necessarily started event watcher). Obviously you must
		1454	not free the watcher as long as it has pending events.
		1455
		1456	Stopping the watcher, letting libev invoke it, or calling
		1457	C<ev_clear_pending> will clear the pending event, even if the watcher was
		1458	not started in the first place.
		1459
		1460	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
		1461	functions that do not need a watcher.
		1462
1156	=back	1463	=back
1157		1464
		1465	See also the L</ASSOCIATING CUSTOM DATA WITH A WATCHER> and L</BUILDING YOUR
		1466	OWN COMPOSITE WATCHERS> idioms.
1158		1467
1159	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	1468	=head2 WATCHER STATES
1160		1469
1161	Each watcher has, by default, a member C<void *data> that you can change	1470	There are various watcher states mentioned throughout this manual -
1162	and read at any time: libev will completely ignore it. This can be used	1471	active, pending and so on. In this section these states and the rules to
1163	to associate arbitrary data with your watcher. If you need more data and	1472	transition between them will be described in more detail - and while these
1164	don't want to allocate memory and store a pointer to it in that data	1473	rules might look complicated, they usually do "the right thing".
1165	member, you can also "subclass" the watcher type and provide your own
1166	data:
1167		1474
1168	struct my_io	1475	=over 4
1169	{
1170	ev_io io;
1171	int otherfd;
1172	void *somedata;
1173	struct whatever *mostinteresting;
1174	};
1175		1476
1176	...	1477	=item initialised
1177	struct my_io w;
1178	ev_io_init (&w.io, my_cb, fd, EV_READ);
1179		1478
1180	And since your callback will be called with a pointer to the watcher, you	1479	Before a watcher can be registered with the event loop it has to be
1181	can cast it back to your own type:	1480	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
		1481	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
1182		1482
1183	static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)	1483	In this state it is simply some block of memory that is suitable for
1184	{	1484	use in an event loop. It can be moved around, freed, reused etc. at
1185	struct my_io *w = (struct my_io *)w_;	1485	will - as long as you either keep the memory contents intact, or call
1186	...	1486	C<ev_TYPE_init> again.
1187	}
1188		1487
1189	More interesting and less C-conformant ways of casting your callback type	1488	=item started/running/active
1190	instead have been omitted.
1191		1489
1192	Another common scenario is to use some data structure with multiple	1490	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
1193	embedded watchers:	1491	property of the event loop, and is actively waiting for events. While in
		1492	this state it cannot be accessed (except in a few documented ways), moved,
		1493	freed or anything else - the only legal thing is to keep a pointer to it,
		1494	and call libev functions on it that are documented to work on active watchers.
1194		1495
1195	struct my_biggy	1496	=item pending
1196	{
1197	int some_data;
1198	ev_timer t1;
1199	ev_timer t2;
1200	}
1201		1497
1202	In this case getting the pointer to C<my_biggy> is a bit more	1498	If a watcher is active and libev determines that an event it is interested
1203	complicated: Either you store the address of your C<my_biggy> struct	1499	in has occurred (such as a timer expiring), it will become pending. It will
1204	in the C<data> member of the watcher (for woozies), or you need to use	1500	stay in this pending state until either it is stopped or its callback is
1205	some pointer arithmetic using C<offsetof> inside your watchers (for real	1501	about to be invoked, so it is not normally pending inside the watcher
1206	programmers):	1502	callback.
1207		1503
1208	#include <stddef.h>	1504	The watcher might or might not be active while it is pending (for example,
		1505	an expired non-repeating timer can be pending but no longer active). If it
		1506	is stopped, it can be freely accessed (e.g. by calling C<ev_TYPE_set>),
		1507	but it is still property of the event loop at this time, so cannot be
		1508	moved, freed or reused. And if it is active the rules described in the
		1509	previous item still apply.
1209		1510
1210	static void	1511	It is also possible to feed an event on a watcher that is not active (e.g.
1211	t1_cb (EV_P_ ev_timer *w, int revents)	1512	via C<ev_feed_event>), in which case it becomes pending without being
1212	{	1513	active.
1213	struct my_biggy big = (struct my_biggy *)
1214	(((char *)w) - offsetof (struct my_biggy, t1));
1215	}
1216		1514
1217	static void	1515	=item stopped
1218	t2_cb (EV_P_ ev_timer *w, int revents)	1516
1219	{	1517	A watcher can be stopped implicitly by libev (in which case it might still
1220	struct my_biggy big = (struct my_biggy *)	1518	be pending), or explicitly by calling its C<ev_TYPE_stop> function. The
1221	(((char *)w) - offsetof (struct my_biggy, t2));	1519	latter will clear any pending state the watcher might be in, regardless
1222	}	1520	of whether it was active or not, so stopping a watcher explicitly before
		1521	freeing it is often a good idea.
		1522
		1523	While stopped (and not pending) the watcher is essentially in the
		1524	initialised state, that is, it can be reused, moved, modified in any way
		1525	you wish (but when you trash the memory block, you need to C<ev_TYPE_init>
		1526	it again).
		1527
		1528	=back
1223		1529
1224	=head2 WATCHER PRIORITY MODELS	1530	=head2 WATCHER PRIORITY MODELS
1225		1531
1226	Many event loops support I<watcher priorities>, which are usually small	1532	Many event loops support I<watcher priorities>, which are usually small
1227	integers that influence the ordering of event callback invocation	1533	integers that influence the ordering of event callback invocation
…		…
1270		1576
1271	For example, to emulate how many other event libraries handle priorities,	1577	For example, to emulate how many other event libraries handle priorities,
1272	you can associate an C<ev_idle> watcher to each such watcher, and in	1578	you can associate an C<ev_idle> watcher to each such watcher, and in
1273	the normal watcher callback, you just start the idle watcher. The real	1579	the normal watcher callback, you just start the idle watcher. The real
1274	processing is done in the idle watcher callback. This causes libev to	1580	processing is done in the idle watcher callback. This causes libev to
1275	continously poll and process kernel event data for the watcher, but when	1581	continuously poll and process kernel event data for the watcher, but when
1276	the lock-out case is known to be rare (which in turn is rare :), this is	1582	the lock-out case is known to be rare (which in turn is rare :), this is
1277	workable.	1583	workable.
1278		1584
1279	Usually, however, the lock-out model implemented that way will perform	1585	Usually, however, the lock-out model implemented that way will perform
1280	miserably under the type of load it was designed to handle. In that case,	1586	miserably under the type of load it was designed to handle. In that case,
…		…
1294	{	1600	{
1295	// stop the I/O watcher, we received the event, but	1601	// stop the I/O watcher, we received the event, but
1296	// are not yet ready to handle it.	1602	// are not yet ready to handle it.
1297	ev_io_stop (EV_A_ w);	1603	ev_io_stop (EV_A_ w);
1298		1604
1299	// start the idle watcher to ahndle the actual event.	1605	// start the idle watcher to handle the actual event.
1300	// it will not be executed as long as other watchers	1606	// it will not be executed as long as other watchers
1301	// with the default priority are receiving events.	1607	// with the default priority are receiving events.
1302	ev_idle_start (EV_A_ &idle);	1608	ev_idle_start (EV_A_ &idle);
1303	}	1609	}
1304		1610
…		…
1354	In general you can register as many read and/or write event watchers per	1660	In general you can register as many read and/or write event watchers per
1355	fd as you want (as long as you don't confuse yourself). Setting all file	1661	fd as you want (as long as you don't confuse yourself). Setting all file
1356	descriptors to non-blocking mode is also usually a good idea (but not	1662	descriptors to non-blocking mode is also usually a good idea (but not
1357	required if you know what you are doing).	1663	required if you know what you are doing).
1358		1664
1359	If you cannot use non-blocking mode, then force the use of a
1360	known-to-be-good backend (at the time of this writing, this includes only
1361	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>). The same applies to file
1362	descriptors for which non-blocking operation makes no sense (such as
1363	files) - libev doesn't guarentee any specific behaviour in that case.
1364
1365	Another thing you have to watch out for is that it is quite easy to	1665	Another thing you have to watch out for is that it is quite easy to
1366	receive "spurious" readiness notifications, that is your callback might	1666	receive "spurious" readiness notifications, that is, your callback might
1367	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1667	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
1368	because there is no data. Not only are some backends known to create a	1668	because there is no data. It is very easy to get into this situation even
1369	lot of those (for example Solaris ports), it is very easy to get into	1669	with a relatively standard program structure. Thus it is best to always
1370	this situation even with a relatively standard program structure. Thus	1670	use non-blocking I/O: An extra C<read>(2) returning C<EAGAIN> is far
1371	it is best to always use non-blocking I/O: An extra C<read>(2) returning
1372	C<EAGAIN> is far preferable to a program hanging until some data arrives.	1671	preferable to a program hanging until some data arrives.
1373		1672
1374	If you cannot run the fd in non-blocking mode (for example you should	1673	If you cannot run the fd in non-blocking mode (for example you should
1375	not play around with an Xlib connection), then you have to separately	1674	not play around with an Xlib connection), then you have to separately
1376	re-test whether a file descriptor is really ready with a known-to-be good	1675	re-test whether a file descriptor is really ready with a known-to-be good
1377	interface such as poll (fortunately in our Xlib example, Xlib already	1676	interface such as poll (fortunately in the case of Xlib, it already does
1378	does this on its own, so its quite safe to use). Some people additionally	1677	this on its own, so its quite safe to use). Some people additionally
1379	use C<SIGALRM> and an interval timer, just to be sure you won't block	1678	use C<SIGALRM> and an interval timer, just to be sure you won't block
1380	indefinitely.	1679	indefinitely.
1381		1680
1382	But really, best use non-blocking mode.	1681	But really, best use non-blocking mode.
1383		1682
1384	=head3 The special problem of disappearing file descriptors	1683	=head3 The special problem of disappearing file descriptors
1385		1684
1386	Some backends (e.g. kqueue, epoll) need to be told about closing a file	1685	Some backends (e.g. kqueue, epoll, linuxaio) need to be told about closing
1387	descriptor (either due to calling C<close> explicitly or any other means,	1686	a file descriptor (either due to calling C<close> explicitly or any other
1388	such as C<dup2>). The reason is that you register interest in some file	1687	means, such as C<dup2>). The reason is that you register interest in some
1389	descriptor, but when it goes away, the operating system will silently drop	1688	file descriptor, but when it goes away, the operating system will silently
1390	this interest. If another file descriptor with the same number then is	1689	drop this interest. If another file descriptor with the same number then
1391	registered with libev, there is no efficient way to see that this is, in	1690	is registered with libev, there is no efficient way to see that this is,
1392	fact, a different file descriptor.	1691	in fact, a different file descriptor.
1393		1692
1394	To avoid having to explicitly tell libev about such cases, libev follows	1693	To avoid having to explicitly tell libev about such cases, libev follows
1395	the following policy: Each time C<ev_io_set> is being called, libev	1694	the following policy: Each time C<ev_io_set> is being called, libev
1396	will assume that this is potentially a new file descriptor, otherwise	1695	will assume that this is potentially a new file descriptor, otherwise
1397	it is assumed that the file descriptor stays the same. That means that	1696	it is assumed that the file descriptor stays the same. That means that
…		…
1411		1710
1412	There is no workaround possible except not registering events	1711	There is no workaround possible except not registering events
1413	for potentially C<dup ()>'ed file descriptors, or to resort to	1712	for potentially C<dup ()>'ed file descriptors, or to resort to
1414	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.	1713	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1415		1714
		1715	=head3 The special problem of files
		1716
		1717	Many people try to use C<select> (or libev) on file descriptors
		1718	representing files, and expect it to become ready when their program
		1719	doesn't block on disk accesses (which can take a long time on their own).
		1720
		1721	However, this cannot ever work in the "expected" way - you get a readiness
		1722	notification as soon as the kernel knows whether and how much data is
		1723	there, and in the case of open files, that's always the case, so you
		1724	always get a readiness notification instantly, and your read (or possibly
		1725	write) will still block on the disk I/O.
		1726
		1727	Another way to view it is that in the case of sockets, pipes, character
		1728	devices and so on, there is another party (the sender) that delivers data
		1729	on its own, but in the case of files, there is no such thing: the disk
		1730	will not send data on its own, simply because it doesn't know what you
		1731	wish to read - you would first have to request some data.
		1732
		1733	Since files are typically not-so-well supported by advanced notification
		1734	mechanism, libev tries hard to emulate POSIX behaviour with respect
		1735	to files, even though you should not use it. The reason for this is
		1736	convenience: sometimes you want to watch STDIN or STDOUT, which is
		1737	usually a tty, often a pipe, but also sometimes files or special devices
		1738	(for example, C<epoll> on Linux works with F</dev/random> but not with
		1739	F</dev/urandom>), and even though the file might better be served with
		1740	asynchronous I/O instead of with non-blocking I/O, it is still useful when
		1741	it "just works" instead of freezing.
		1742
		1743	So avoid file descriptors pointing to files when you know it (e.g. use
		1744	libeio), but use them when it is convenient, e.g. for STDIN/STDOUT, or
		1745	when you rarely read from a file instead of from a socket, and want to
		1746	reuse the same code path.
		1747
1416	=head3 The special problem of fork	1748	=head3 The special problem of fork
1417		1749
1418	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit	1750	Some backends (epoll, kqueue, probably linuxaio) do not support C<fork ()>
1419	useless behaviour. Libev fully supports fork, but needs to be told about	1751	at all or exhibit useless behaviour. Libev fully supports fork, but needs
1420	it in the child.	1752	to be told about it in the child if you want to continue to use it in the
		1753	child.
1421		1754
1422	To support fork in your programs, you either have to call	1755	To support fork in your child processes, you have to call C<ev_loop_fork
1423	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,	1756	()> after a fork in the child, enable C<EVFLAG_FORKCHECK>, or resort to
1424	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or	1757	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1425	C<EVBACKEND_POLL>.
1426		1758
1427	=head3 The special problem of SIGPIPE	1759	=head3 The special problem of SIGPIPE
1428		1760
1429	While not really specific to libev, it is easy to forget about C<SIGPIPE>:	1761	While not really specific to libev, it is easy to forget about C<SIGPIPE>:
1430	when writing to a pipe whose other end has been closed, your program gets	1762	when writing to a pipe whose other end has been closed, your program gets
…		…
1433		1765
1434	So when you encounter spurious, unexplained daemon exits, make sure you	1766	So when you encounter spurious, unexplained daemon exits, make sure you
1435	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon	1767	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
1436	somewhere, as that would have given you a big clue).	1768	somewhere, as that would have given you a big clue).
1437		1769
		1770	=head3 The special problem of accept()ing when you can't
		1771
		1772	Many implementations of the POSIX C<accept> function (for example,
		1773	found in post-2004 Linux) have the peculiar behaviour of not removing a
		1774	connection from the pending queue in all error cases.
		1775
		1776	For example, larger servers often run out of file descriptors (because
		1777	of resource limits), causing C<accept> to fail with C<ENFILE> but not
		1778	rejecting the connection, leading to libev signalling readiness on
		1779	the next iteration again (the connection still exists after all), and
		1780	typically causing the program to loop at 100% CPU usage.
		1781
		1782	Unfortunately, the set of errors that cause this issue differs between
		1783	operating systems, there is usually little the app can do to remedy the
		1784	situation, and no known thread-safe method of removing the connection to
		1785	cope with overload is known (to me).
		1786
		1787	One of the easiest ways to handle this situation is to just ignore it
		1788	- when the program encounters an overload, it will just loop until the
		1789	situation is over. While this is a form of busy waiting, no OS offers an
		1790	event-based way to handle this situation, so it's the best one can do.
		1791
		1792	A better way to handle the situation is to log any errors other than
		1793	C<EAGAIN> and C<EWOULDBLOCK>, making sure not to flood the log with such
		1794	messages, and continue as usual, which at least gives the user an idea of
		1795	what could be wrong ("raise the ulimit!"). For extra points one could stop
		1796	the C<ev_io> watcher on the listening fd "for a while", which reduces CPU
		1797	usage.
		1798
		1799	If your program is single-threaded, then you could also keep a dummy file
		1800	descriptor for overload situations (e.g. by opening F</dev/null>), and
		1801	when you run into C<ENFILE> or C<EMFILE>, close it, run C<accept>,
		1802	close that fd, and create a new dummy fd. This will gracefully refuse
		1803	clients under typical overload conditions.
		1804
		1805	The last way to handle it is to simply log the error and C<exit>, as
		1806	is often done with C<malloc> failures, but this results in an easy
		1807	opportunity for a DoS attack.
1438		1808
1439	=head3 Watcher-Specific Functions	1809	=head3 Watcher-Specific Functions
1440		1810
1441	=over 4	1811	=over 4
1442		1812
…		…
1474	...	1844	...
1475	struct ev_loop *loop = ev_default_init (0);	1845	struct ev_loop *loop = ev_default_init (0);
1476	ev_io stdin_readable;	1846	ev_io stdin_readable;
1477	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);	1847	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
1478	ev_io_start (loop, &stdin_readable);	1848	ev_io_start (loop, &stdin_readable);
1479	ev_loop (loop, 0);	1849	ev_run (loop, 0);
1480		1850
1481		1851
1482	=head2 C<ev_timer> - relative and optionally repeating timeouts	1852	=head2 C<ev_timer> - relative and optionally repeating timeouts
1483		1853
1484	Timer watchers are simple relative timers that generate an event after a	1854	Timer watchers are simple relative timers that generate an event after a
…		…
1490	detecting time jumps is hard, and some inaccuracies are unavoidable (the	1860	detecting time jumps is hard, and some inaccuracies are unavoidable (the
1491	monotonic clock option helps a lot here).	1861	monotonic clock option helps a lot here).
1492		1862
1493	The callback is guaranteed to be invoked only I<after> its timeout has	1863	The callback is guaranteed to be invoked only I<after> its timeout has
1494	passed (not I<at>, so on systems with very low-resolution clocks this	1864	passed (not I<at>, so on systems with very low-resolution clocks this
1495	might introduce a small delay). If multiple timers become ready during the	1865	might introduce a small delay, see "the special problem of being too
		1866	early", below). If multiple timers become ready during the same loop
1496	same loop iteration then the ones with earlier time-out values are invoked	1867	iteration then the ones with earlier time-out values are invoked before
1497	before ones of the same priority with later time-out values (but this is	1868	ones of the same priority with later time-out values (but this is no
1498	no longer true when a callback calls C<ev_loop> recursively).	1869	longer true when a callback calls C<ev_run> recursively).
1499		1870
1500	=head3 Be smart about timeouts	1871	=head3 Be smart about timeouts
1501		1872
1502	Many real-world problems involve some kind of timeout, usually for error	1873	Many real-world problems involve some kind of timeout, usually for error
1503	recovery. A typical example is an HTTP request - if the other side hangs,	1874	recovery. A typical example is an HTTP request - if the other side hangs,
…		…
1578		1949
1579	In this case, it would be more efficient to leave the C<ev_timer> alone,	1950	In this case, it would be more efficient to leave the C<ev_timer> alone,
1580	but remember the time of last activity, and check for a real timeout only	1951	but remember the time of last activity, and check for a real timeout only
1581	within the callback:	1952	within the callback:
1582		1953
		1954	ev_tstamp timeout = 60.;
1583	ev_tstamp last_activity; // time of last activity	1955	ev_tstamp last_activity; // time of last activity
		1956	ev_timer timer;
1584		1957
1585	static void	1958	static void
1586	callback (EV_P_ ev_timer *w, int revents)	1959	callback (EV_P_ ev_timer *w, int revents)
1587	{	1960	{
1588	ev_tstamp now = ev_now (EV_A);	1961	// calculate when the timeout would happen
1589	ev_tstamp timeout = last_activity + 60.;	1962	ev_tstamp after = last_activity - ev_now (EV_A) + timeout;
1590		1963
1591	// if last_activity + 60. is older than now, we did time out	1964	// if negative, it means we the timeout already occurred
1592	if (timeout < now)	1965	if (after < 0.)
1593	{	1966	{
1594	// timeout occured, take action	1967	// timeout occurred, take action
1595	}	1968	}
1596	else	1969	else
1597	{	1970	{
1598	// callback was invoked, but there was some activity, re-arm	1971	// callback was invoked, but there was some recent
1599	// the watcher to fire in last_activity + 60, which is	1972	// activity. simply restart the timer to time out
1600	// guaranteed to be in the future, so "again" is positive:	1973	// after "after" seconds, which is the earliest time
1601	w->repeat = timeout - now;	1974	// the timeout can occur.
		1975	ev_timer_set (w, after, 0.);
1602	ev_timer_again (EV_A_ w);	1976	ev_timer_start (EV_A_ w);
1603	}	1977	}
1604	}	1978	}
1605		1979
1606	To summarise the callback: first calculate the real timeout (defined	1980	To summarise the callback: first calculate in how many seconds the
1607	as "60 seconds after the last activity"), then check if that time has	1981	timeout will occur (by calculating the absolute time when it would occur,
1608	been reached, which means something I<did>, in fact, time out. Otherwise	1982	C<last_activity + timeout>, and subtracting the current time, C<ev_now
1609	the callback was invoked too early (C<timeout> is in the future), so	1983	(EV_A)> from that).
1610	re-schedule the timer to fire at that future time, to see if maybe we have
1611	a timeout then.
1612		1984
1613	Note how C<ev_timer_again> is used, taking advantage of the	1985	If this value is negative, then we are already past the timeout, i.e. we
1614	C<ev_timer_again> optimisation when the timer is already running.	1986	timed out, and need to do whatever is needed in this case.
		1987
		1988	Otherwise, we now the earliest time at which the timeout would trigger,
		1989	and simply start the timer with this timeout value.
		1990
		1991	In other words, each time the callback is invoked it will check whether
		1992	the timeout occurred. If not, it will simply reschedule itself to check
		1993	again at the earliest time it could time out. Rinse. Repeat.
1615		1994
1616	This scheme causes more callback invocations (about one every 60 seconds	1995	This scheme causes more callback invocations (about one every 60 seconds
1617	minus half the average time between activity), but virtually no calls to	1996	minus half the average time between activity), but virtually no calls to
1618	libev to change the timeout.	1997	libev to change the timeout.
1619		1998
1620	To start the timer, simply initialise the watcher and set C<last_activity>	1999	To start the machinery, simply initialise the watcher and set
1621	to the current time (meaning we just have some activity :), then call the	2000	C<last_activity> to the current time (meaning there was some activity just
1622	callback, which will "do the right thing" and start the timer:	2001	now), then call the callback, which will "do the right thing" and start
		2002	the timer:
1623		2003
		2004	last_activity = ev_now (EV_A);
1624	ev_init (timer, callback);	2005	ev_init (&timer, callback);
1625	last_activity = ev_now (loop);	2006	callback (EV_A_ &timer, 0);
1626	callback (loop, timer, EV_TIMEOUT);
1627		2007
1628	And when there is some activity, simply store the current time in	2008	When there is some activity, simply store the current time in
1629	C<last_activity>, no libev calls at all:	2009	C<last_activity>, no libev calls at all:
1630		2010
		2011	if (activity detected)
1631	last_actiivty = ev_now (loop);	2012	last_activity = ev_now (EV_A);
		2013
		2014	When your timeout value changes, then the timeout can be changed by simply
		2015	providing a new value, stopping the timer and calling the callback, which
		2016	will again do the right thing (for example, time out immediately :).
		2017
		2018	timeout = new_value;
		2019	ev_timer_stop (EV_A_ &timer);
		2020	callback (EV_A_ &timer, 0);
1632		2021
1633	This technique is slightly more complex, but in most cases where the	2022	This technique is slightly more complex, but in most cases where the
1634	time-out is unlikely to be triggered, much more efficient.	2023	time-out is unlikely to be triggered, much more efficient.
1635
1636	Changing the timeout is trivial as well (if it isn't hard-coded in the
1637	callback :) - just change the timeout and invoke the callback, which will
1638	fix things for you.
1639		2024
1640	=item 4. Wee, just use a double-linked list for your timeouts.	2025	=item 4. Wee, just use a double-linked list for your timeouts.
1641		2026
1642	If there is not one request, but many thousands (millions...), all	2027	If there is not one request, but many thousands (millions...), all
1643	employing some kind of timeout with the same timeout value, then one can	2028	employing some kind of timeout with the same timeout value, then one can
…		…
1670	Method #1 is almost always a bad idea, and buys you nothing. Method #4 is	2055	Method #1 is almost always a bad idea, and buys you nothing. Method #4 is
1671	rather complicated, but extremely efficient, something that really pays	2056	rather complicated, but extremely efficient, something that really pays
1672	off after the first million or so of active timers, i.e. it's usually	2057	off after the first million or so of active timers, i.e. it's usually
1673	overkill :)	2058	overkill :)
1674		2059
		2060	=head3 The special problem of being too early
		2061
		2062	If you ask a timer to call your callback after three seconds, then
		2063	you expect it to be invoked after three seconds - but of course, this
		2064	cannot be guaranteed to infinite precision. Less obviously, it cannot be
		2065	guaranteed to any precision by libev - imagine somebody suspending the
		2066	process with a STOP signal for a few hours for example.
		2067
		2068	So, libev tries to invoke your callback as soon as possible I<after> the
		2069	delay has occurred, but cannot guarantee this.
		2070
		2071	A less obvious failure mode is calling your callback too early: many event
		2072	loops compare timestamps with a "elapsed delay >= requested delay", but
		2073	this can cause your callback to be invoked much earlier than you would
		2074	expect.
		2075
		2076	To see why, imagine a system with a clock that only offers full second
		2077	resolution (think windows if you can't come up with a broken enough OS
		2078	yourself). If you schedule a one-second timer at the time 500.9, then the
		2079	event loop will schedule your timeout to elapse at a system time of 500
		2080	(500.9 truncated to the resolution) + 1, or 501.
		2081
		2082	If an event library looks at the timeout 0.1s later, it will see "501 >=
		2083	501" and invoke the callback 0.1s after it was started, even though a
		2084	one-second delay was requested - this is being "too early", despite best
		2085	intentions.
		2086
		2087	This is the reason why libev will never invoke the callback if the elapsed
		2088	delay equals the requested delay, but only when the elapsed delay is
		2089	larger than the requested delay. In the example above, libev would only invoke
		2090	the callback at system time 502, or 1.1s after the timer was started.
		2091
		2092	So, while libev cannot guarantee that your callback will be invoked
		2093	exactly when requested, it I<can> and I<does> guarantee that the requested
		2094	delay has actually elapsed, or in other words, it always errs on the "too
		2095	late" side of things.
		2096
1675	=head3 The special problem of time updates	2097	=head3 The special problem of time updates
1676		2098
1677	Establishing the current time is a costly operation (it usually takes at	2099	Establishing the current time is a costly operation (it usually takes
1678	least two system calls): EV therefore updates its idea of the current	2100	at least one system call): EV therefore updates its idea of the current
1679	time only before and after C<ev_loop> collects new events, which causes a	2101	time only before and after C<ev_run> collects new events, which causes a
1680	growing difference between C<ev_now ()> and C<ev_time ()> when handling	2102	growing difference between C<ev_now ()> and C<ev_time ()> when handling
1681	lots of events in one iteration.	2103	lots of events in one iteration.
1682		2104
1683	The relative timeouts are calculated relative to the C<ev_now ()>	2105	The relative timeouts are calculated relative to the C<ev_now ()>
1684	time. This is usually the right thing as this timestamp refers to the time	2106	time. This is usually the right thing as this timestamp refers to the time
1685	of the event triggering whatever timeout you are modifying/starting. If	2107	of the event triggering whatever timeout you are modifying/starting. If
1686	you suspect event processing to be delayed and you I<need> to base the	2108	you suspect event processing to be delayed and you I<need> to base the
1687	timeout on the current time, use something like this to adjust for this:	2109	timeout on the current time, use something like the following to adjust
		2110	for it:
1688		2111
1689	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);	2112	ev_timer_set (&timer, after + (ev_time () - ev_now ()), 0.);
1690		2113
1691	If the event loop is suspended for a long time, you can also force an	2114	If the event loop is suspended for a long time, you can also force an
1692	update of the time returned by C<ev_now ()> by calling C<ev_now_update	2115	update of the time returned by C<ev_now ()> by calling C<ev_now_update
1693	()>.	2116	()>, although that will push the event time of all outstanding events
		2117	further into the future.
		2118
		2119	=head3 The special problem of unsynchronised clocks
		2120
		2121	Modern systems have a variety of clocks - libev itself uses the normal
		2122	"wall clock" clock and, if available, the monotonic clock (to avoid time
		2123	jumps).
		2124
		2125	Neither of these clocks is synchronised with each other or any other clock
		2126	on the system, so C<ev_time ()> might return a considerably different time
		2127	than C<gettimeofday ()> or C<time ()>. On a GNU/Linux system, for example,
		2128	a call to C<gettimeofday> might return a second count that is one higher
		2129	than a directly following call to C<time>.
		2130
		2131	The moral of this is to only compare libev-related timestamps with
		2132	C<ev_time ()> and C<ev_now ()>, at least if you want better precision than
		2133	a second or so.
		2134
		2135	One more problem arises due to this lack of synchronisation: if libev uses
		2136	the system monotonic clock and you compare timestamps from C<ev_time>
		2137	or C<ev_now> from when you started your timer and when your callback is
		2138	invoked, you will find that sometimes the callback is a bit "early".
		2139
		2140	This is because C<ev_timer>s work in real time, not wall clock time, so
		2141	libev makes sure your callback is not invoked before the delay happened,
		2142	I<measured according to the real time>, not the system clock.
		2143
		2144	If your timeouts are based on a physical timescale (e.g. "time out this
		2145	connection after 100 seconds") then this shouldn't bother you as it is
		2146	exactly the right behaviour.
		2147
		2148	If you want to compare wall clock/system timestamps to your timers, then
		2149	you need to use C<ev_periodic>s, as these are based on the wall clock
		2150	time, where your comparisons will always generate correct results.
		2151
		2152	=head3 The special problems of suspended animation
		2153
		2154	When you leave the server world it is quite customary to hit machines that
		2155	can suspend/hibernate - what happens to the clocks during such a suspend?
		2156
		2157	Some quick tests made with a Linux 2.6.28 indicate that a suspend freezes
		2158	all processes, while the clocks (C<times>, C<CLOCK_MONOTONIC>) continue
		2159	to run until the system is suspended, but they will not advance while the
		2160	system is suspended. That means, on resume, it will be as if the program
		2161	was frozen for a few seconds, but the suspend time will not be counted
		2162	towards C<ev_timer> when a monotonic clock source is used. The real time
		2163	clock advanced as expected, but if it is used as sole clocksource, then a
		2164	long suspend would be detected as a time jump by libev, and timers would
		2165	be adjusted accordingly.
		2166
		2167	I would not be surprised to see different behaviour in different between
		2168	operating systems, OS versions or even different hardware.
		2169
		2170	The other form of suspend (job control, or sending a SIGSTOP) will see a
		2171	time jump in the monotonic clocks and the realtime clock. If the program
		2172	is suspended for a very long time, and monotonic clock sources are in use,
		2173	then you can expect C<ev_timer>s to expire as the full suspension time
		2174	will be counted towards the timers. When no monotonic clock source is in
		2175	use, then libev will again assume a timejump and adjust accordingly.
		2176
		2177	It might be beneficial for this latter case to call C<ev_suspend>
		2178	and C<ev_resume> in code that handles C<SIGTSTP>, to at least get
		2179	deterministic behaviour in this case (you can do nothing against
		2180	C<SIGSTOP>).
1694		2181
1695	=head3 Watcher-Specific Functions and Data Members	2182	=head3 Watcher-Specific Functions and Data Members
1696		2183
1697	=over 4	2184	=over 4
1698		2185
1699	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	2186	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
1700		2187
1701	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)	2188	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)
1702		2189
1703	Configure the timer to trigger after C<after> seconds. If C<repeat>	2190	Configure the timer to trigger after C<after> seconds (fractional and
1704	is C<0.>, then it will automatically be stopped once the timeout is	2191	negative values are supported). If C<repeat> is C<0.>, then it will
1705	reached. If it is positive, then the timer will automatically be	2192	automatically be stopped once the timeout is reached. If it is positive,
1706	configured to trigger again C<repeat> seconds later, again, and again,	2193	then the timer will automatically be configured to trigger again C<repeat>
1707	until stopped manually.	2194	seconds later, again, and again, until stopped manually.
1708		2195
1709	The timer itself will do a best-effort at avoiding drift, that is, if	2196	The timer itself will do a best-effort at avoiding drift, that is, if
1710	you configure a timer to trigger every 10 seconds, then it will normally	2197	you configure a timer to trigger every 10 seconds, then it will normally
1711	trigger at exactly 10 second intervals. If, however, your program cannot	2198	trigger at exactly 10 second intervals. If, however, your program cannot
1712	keep up with the timer (because it takes longer than those 10 seconds to	2199	keep up with the timer (because it takes longer than those 10 seconds to
1713	do stuff) the timer will not fire more than once per event loop iteration.	2200	do stuff) the timer will not fire more than once per event loop iteration.
1714		2201
1715	=item ev_timer_again (loop, ev_timer *)	2202	=item ev_timer_again (loop, ev_timer *)
1716		2203
1717	This will act as if the timer timed out and restart it again if it is	2204	This will act as if the timer timed out, and restarts it again if it is
1718	repeating. The exact semantics are:	2205	repeating. It basically works like calling C<ev_timer_stop>, updating the
		2206	timeout to the C<repeat> value and calling C<ev_timer_start>.
1719		2207
		2208	The exact semantics are as in the following rules, all of which will be
		2209	applied to the watcher:
		2210
		2211	=over 4
		2212
1720	If the timer is pending, its pending status is cleared.	2213	=item If the timer is pending, the pending status is always cleared.
1721		2214
1722	If the timer is started but non-repeating, stop it (as if it timed out).	2215	=item If the timer is started but non-repeating, stop it (as if it timed
		2216	out, without invoking it).
1723		2217
1724	If the timer is repeating, either start it if necessary (with the	2218	=item If the timer is repeating, make the C<repeat> value the new timeout
1725	C<repeat> value), or reset the running timer to the C<repeat> value.	2219	and start the timer, if necessary.
1726		2220
		2221	=back
		2222
1727	This sounds a bit complicated, see L<Be smart about timeouts>, above, for a	2223	This sounds a bit complicated, see L</Be smart about timeouts>, above, for a
1728	usage example.	2224	usage example.
		2225
		2226	=item ev_tstamp ev_timer_remaining (loop, ev_timer *)
		2227
		2228	Returns the remaining time until a timer fires. If the timer is active,
		2229	then this time is relative to the current event loop time, otherwise it's
		2230	the timeout value currently configured.
		2231
		2232	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns
		2233	C<5>. When the timer is started and one second passes, C<ev_timer_remaining>
		2234	will return C<4>. When the timer expires and is restarted, it will return
		2235	roughly C<7> (likely slightly less as callback invocation takes some time,
		2236	too), and so on.
1729		2237
1730	=item ev_tstamp repeat [read-write]	2238	=item ev_tstamp repeat [read-write]
1731		2239
1732	The current C<repeat> value. Will be used each time the watcher times out	2240	The current C<repeat> value. Will be used each time the watcher times out
1733	or C<ev_timer_again> is called, and determines the next timeout (if any),	2241	or C<ev_timer_again> is called, and determines the next timeout (if any),
…		…
1759	}	2267	}
1760		2268
1761	ev_timer mytimer;	2269	ev_timer mytimer;
1762	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */	2270	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
1763	ev_timer_again (&mytimer); /* start timer */	2271	ev_timer_again (&mytimer); /* start timer */
1764	ev_loop (loop, 0);	2272	ev_run (loop, 0);
1765		2273
1766	// and in some piece of code that gets executed on any "activity":	2274	// and in some piece of code that gets executed on any "activity":
1767	// reset the timeout to start ticking again at 10 seconds	2275	// reset the timeout to start ticking again at 10 seconds
1768	ev_timer_again (&mytimer);	2276	ev_timer_again (&mytimer);
1769		2277
…		…
1773	Periodic watchers are also timers of a kind, but they are very versatile	2281	Periodic watchers are also timers of a kind, but they are very versatile
1774	(and unfortunately a bit complex).	2282	(and unfortunately a bit complex).
1775		2283
1776	Unlike C<ev_timer>, periodic watchers are not based on real time (or	2284	Unlike C<ev_timer>, periodic watchers are not based on real time (or
1777	relative time, the physical time that passes) but on wall clock time	2285	relative time, the physical time that passes) but on wall clock time
1778	(absolute time, the thing you can read on your calender or clock). The	2286	(absolute time, the thing you can read on your calendar or clock). The
1779	difference is that wall clock time can run faster or slower than real	2287	difference is that wall clock time can run faster or slower than real
1780	time, and time jumps are not uncommon (e.g. when you adjust your	2288	time, and time jumps are not uncommon (e.g. when you adjust your
1781	wrist-watch).	2289	wrist-watch).
1782		2290
1783	You can tell a periodic watcher to trigger after some specific point	2291	You can tell a periodic watcher to trigger after some specific point
…		…
1788	C<ev_timer>, which would still trigger roughly 10 seconds after starting	2296	C<ev_timer>, which would still trigger roughly 10 seconds after starting
1789	it, as it uses a relative timeout).	2297	it, as it uses a relative timeout).
1790		2298
1791	C<ev_periodic> watchers can also be used to implement vastly more complex	2299	C<ev_periodic> watchers can also be used to implement vastly more complex
1792	timers, such as triggering an event on each "midnight, local time", or	2300	timers, such as triggering an event on each "midnight, local time", or
1793	other complicated rules. This cannot be done with C<ev_timer> watchers, as	2301	other complicated rules. This cannot easily be done with C<ev_timer>
1794	those cannot react to time jumps.	2302	watchers, as those cannot react to time jumps.
1795		2303
1796	As with timers, the callback is guaranteed to be invoked only when the	2304	As with timers, the callback is guaranteed to be invoked only when the
1797	point in time where it is supposed to trigger has passed. If multiple	2305	point in time where it is supposed to trigger has passed. If multiple
1798	timers become ready during the same loop iteration then the ones with	2306	timers become ready during the same loop iteration then the ones with
1799	earlier time-out values are invoked before ones with later time-out values	2307	earlier time-out values are invoked before ones with later time-out values
1800	(but this is no longer true when a callback calls C<ev_loop> recursively).	2308	(but this is no longer true when a callback calls C<ev_run> recursively).
1801		2309
1802	=head3 Watcher-Specific Functions and Data Members	2310	=head3 Watcher-Specific Functions and Data Members
1803		2311
1804	=over 4	2312	=over 4
1805		2313
…		…
1840		2348
1841	Another way to think about it (for the mathematically inclined) is that	2349	Another way to think about it (for the mathematically inclined) is that
1842	C<ev_periodic> will try to run the callback in this mode at the next possible	2350	C<ev_periodic> will try to run the callback in this mode at the next possible
1843	time where C<time = offset (mod interval)>, regardless of any time jumps.	2351	time where C<time = offset (mod interval)>, regardless of any time jumps.
1844		2352
1845	For numerical stability it is preferable that the C<offset> value is near	2353	The C<interval> I<MUST> be positive, and for numerical stability, the
1846	C<ev_now ()> (the current time), but there is no range requirement for	2354	interval value should be higher than C<1/8192> (which is around 100
1847	this value, and in fact is often specified as zero.	2355	microseconds) and C<offset> should be higher than C<0> and should have
		2356	at most a similar magnitude as the current time (say, within a factor of
		2357	ten). Typical values for offset are, in fact, C<0> or something between
		2358	C<0> and C<interval>, which is also the recommended range.
1848		2359
1849	Note also that there is an upper limit to how often a timer can fire (CPU	2360	Note also that there is an upper limit to how often a timer can fire (CPU
1850	speed for example), so if C<interval> is very small then timing stability	2361	speed for example), so if C<interval> is very small then timing stability
1851	will of course deteriorate. Libev itself tries to be exact to be about one	2362	will of course deteriorate. Libev itself tries to be exact to be about one
1852	millisecond (if the OS supports it and the machine is fast enough).	2363	millisecond (if the OS supports it and the machine is fast enough).
…		…
1882		2393
1883	NOTE: I<< This callback must always return a time that is higher than or	2394	NOTE: I<< This callback must always return a time that is higher than or
1884	equal to the passed C<now> value >>.	2395	equal to the passed C<now> value >>.
1885		2396
1886	This can be used to create very complex timers, such as a timer that	2397	This can be used to create very complex timers, such as a timer that
1887	triggers on "next midnight, local time". To do this, you would calculate the	2398	triggers on "next midnight, local time". To do this, you would calculate
1888	next midnight after C<now> and return the timestamp value for this. How	2399	the next midnight after C<now> and return the timestamp value for
1889	you do this is, again, up to you (but it is not trivial, which is the main	2400	this. Here is a (completely untested, no error checking) example on how to
1890	reason I omitted it as an example).	2401	do this:
		2402
		2403	#include <time.h>
		2404
		2405	static ev_tstamp
		2406	my_rescheduler (ev_periodic *w, ev_tstamp now)
		2407	{
		2408	time_t tnow = (time_t)now;
		2409	struct tm tm;
		2410	localtime_r (&tnow, &tm);
		2411
		2412	tm.tm_sec = tm.tm_min = tm.tm_hour = 0; // midnight current day
		2413	++tm.tm_mday; // midnight next day
		2414
		2415	return mktime (&tm);
		2416	}
		2417
		2418	Note: this code might run into trouble on days that have more then two
		2419	midnights (beginning and end).
1891		2420
1892	=back	2421	=back
1893		2422
1894	=item ev_periodic_again (loop, ev_periodic *)	2423	=item ev_periodic_again (loop, ev_periodic *)
1895		2424
…		…
1933	Example: Call a callback every hour, or, more precisely, whenever the	2462	Example: Call a callback every hour, or, more precisely, whenever the
1934	system time is divisible by 3600. The callback invocation times have	2463	system time is divisible by 3600. The callback invocation times have
1935	potentially a lot of jitter, but good long-term stability.	2464	potentially a lot of jitter, but good long-term stability.
1936		2465
1937	static void	2466	static void
1938	clock_cb (struct ev_loop *loop, ev_io *w, int revents)	2467	clock_cb (struct ev_loop *loop, ev_periodic *w, int revents)
1939	{	2468	{
1940	... its now a full hour (UTC, or TAI or whatever your clock follows)	2469	... its now a full hour (UTC, or TAI or whatever your clock follows)
1941	}	2470	}
1942		2471
1943	ev_periodic hourly_tick;	2472	ev_periodic hourly_tick;
…		…
1960		2489
1961	ev_periodic hourly_tick;	2490	ev_periodic hourly_tick;
1962	ev_periodic_init (&hourly_tick, clock_cb,	2491	ev_periodic_init (&hourly_tick, clock_cb,
1963	fmod (ev_now (loop), 3600.), 3600., 0);	2492	fmod (ev_now (loop), 3600.), 3600., 0);
1964	ev_periodic_start (loop, &hourly_tick);	2493	ev_periodic_start (loop, &hourly_tick);
1965		2494
1966		2495
1967	=head2 C<ev_signal> - signal me when a signal gets signalled!	2496	=head2 C<ev_signal> - signal me when a signal gets signalled!
1968		2497
1969	Signal watchers will trigger an event when the process receives a specific	2498	Signal watchers will trigger an event when the process receives a specific
1970	signal one or more times. Even though signals are very asynchronous, libev	2499	signal one or more times. Even though signals are very asynchronous, libev
1971	will try it's best to deliver signals synchronously, i.e. as part of the	2500	will try its best to deliver signals synchronously, i.e. as part of the
1972	normal event processing, like any other event.	2501	normal event processing, like any other event.
1973		2502
1974	If you want signals asynchronously, just use C<sigaction> as you would	2503	If you want signals to be delivered truly asynchronously, just use
1975	do without libev and forget about sharing the signal. You can even use	2504	C<sigaction> as you would do without libev and forget about sharing
1976	C<ev_async> from a signal handler to synchronously wake up an event loop.	2505	the signal. You can even use C<ev_async> from a signal handler to
		2506	synchronously wake up an event loop.
1977		2507
1978	You can configure as many watchers as you like per signal. Only when the	2508	You can configure as many watchers as you like for the same signal, but
1979	first watcher gets started will libev actually register a signal handler	2509	only within the same loop, i.e. you can watch for C<SIGINT> in your
1980	with the kernel (thus it coexists with your own signal handlers as long as	2510	default loop and for C<SIGIO> in another loop, but you cannot watch for
1981	you don't register any with libev for the same signal). Similarly, when	2511	C<SIGINT> in both the default loop and another loop at the same time. At
1982	the last signal watcher for a signal is stopped, libev will reset the	2512	the moment, C<SIGCHLD> is permanently tied to the default loop.
1983	signal handler to SIG_DFL (regardless of what it was set to before).	2513
		2514	Only after the first watcher for a signal is started will libev actually
		2515	register something with the kernel. It thus coexists with your own signal
		2516	handlers as long as you don't register any with libev for the same signal.
1984		2517
1985	If possible and supported, libev will install its handlers with	2518	If possible and supported, libev will install its handlers with
1986	C<SA_RESTART> behaviour enabled, so system calls should not be unduly	2519	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should
1987	interrupted. If you have a problem with system calls getting interrupted by	2520	not be unduly interrupted. If you have a problem with system calls getting
1988	signals you can block all signals in an C<ev_check> watcher and unblock	2521	interrupted by signals you can block all signals in an C<ev_check> watcher
1989	them in an C<ev_prepare> watcher.	2522	and unblock them in an C<ev_prepare> watcher.
		2523
		2524	=head3 The special problem of inheritance over fork/execve/pthread_create
		2525
		2526	Both the signal mask (C<sigprocmask>) and the signal disposition
		2527	(C<sigaction>) are unspecified after starting a signal watcher (and after
		2528	stopping it again), that is, libev might or might not block the signal,
		2529	and might or might not set or restore the installed signal handler (but
		2530	see C<EVFLAG_NOSIGMASK>).
		2531
		2532	While this does not matter for the signal disposition (libev never
		2533	sets signals to C<SIG_IGN>, so handlers will be reset to C<SIG_DFL> on
		2534	C<execve>), this matters for the signal mask: many programs do not expect
		2535	certain signals to be blocked.
		2536
		2537	This means that before calling C<exec> (from the child) you should reset
		2538	the signal mask to whatever "default" you expect (all clear is a good
		2539	choice usually).
		2540
		2541	The simplest way to ensure that the signal mask is reset in the child is
		2542	to install a fork handler with C<pthread_atfork> that resets it. That will
		2543	catch fork calls done by libraries (such as the libc) as well.
		2544
		2545	In current versions of libev, the signal will not be blocked indefinitely
		2546	unless you use the C<signalfd> API (C<EV_SIGNALFD>). While this reduces
		2547	the window of opportunity for problems, it will not go away, as libev
		2548	I<has> to modify the signal mask, at least temporarily.
		2549
		2550	So I can't stress this enough: I<If you do not reset your signal mask when
		2551	you expect it to be empty, you have a race condition in your code>. This
		2552	is not a libev-specific thing, this is true for most event libraries.
		2553
		2554	=head3 The special problem of threads signal handling
		2555
		2556	POSIX threads has problematic signal handling semantics, specifically,
		2557	a lot of functionality (sigfd, sigwait etc.) only really works if all
		2558	threads in a process block signals, which is hard to achieve.
		2559
		2560	When you want to use sigwait (or mix libev signal handling with your own
		2561	for the same signals), you can tackle this problem by globally blocking
		2562	all signals before creating any threads (or creating them with a fully set
		2563	sigprocmask) and also specifying the C<EVFLAG_NOSIGMASK> when creating
		2564	loops. Then designate one thread as "signal receiver thread" which handles
		2565	these signals. You can pass on any signals that libev might be interested
		2566	in by calling C<ev_feed_signal>.
1990		2567
1991	=head3 Watcher-Specific Functions and Data Members	2568	=head3 Watcher-Specific Functions and Data Members
1992		2569
1993	=over 4	2570	=over 4
1994		2571
…		…
2010	Example: Try to exit cleanly on SIGINT.	2587	Example: Try to exit cleanly on SIGINT.
2011		2588
2012	static void	2589	static void
2013	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)	2590	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)
2014	{	2591	{
2015	ev_unloop (loop, EVUNLOOP_ALL);	2592	ev_break (loop, EVBREAK_ALL);
2016	}	2593	}
2017		2594
2018	ev_signal signal_watcher;	2595	ev_signal signal_watcher;
2019	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	2596	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
2020	ev_signal_start (loop, &signal_watcher);	2597	ev_signal_start (loop, &signal_watcher);
…		…
2039	libev)	2616	libev)
2040		2617
2041	=head3 Process Interaction	2618	=head3 Process Interaction
2042		2619
2043	Libev grabs C<SIGCHLD> as soon as the default event loop is	2620	Libev grabs C<SIGCHLD> as soon as the default event loop is
2044	initialised. This is necessary to guarantee proper behaviour even if	2621	initialised. This is necessary to guarantee proper behaviour even if the
2045	the first child watcher is started after the child exits. The occurrence	2622	first child watcher is started after the child exits. The occurrence
2046	of C<SIGCHLD> is recorded asynchronously, but child reaping is done	2623	of C<SIGCHLD> is recorded asynchronously, but child reaping is done
2047	synchronously as part of the event loop processing. Libev always reaps all	2624	synchronously as part of the event loop processing. Libev always reaps all
2048	children, even ones not watched.	2625	children, even ones not watched.
2049		2626
2050	=head3 Overriding the Built-In Processing	2627	=head3 Overriding the Built-In Processing
…		…
2060	=head3 Stopping the Child Watcher	2637	=head3 Stopping the Child Watcher
2061		2638
2062	Currently, the child watcher never gets stopped, even when the	2639	Currently, the child watcher never gets stopped, even when the
2063	child terminates, so normally one needs to stop the watcher in the	2640	child terminates, so normally one needs to stop the watcher in the
2064	callback. Future versions of libev might stop the watcher automatically	2641	callback. Future versions of libev might stop the watcher automatically
2065	when a child exit is detected.	2642	when a child exit is detected (calling C<ev_child_stop> twice is not a
		2643	problem).
2066		2644
2067	=head3 Watcher-Specific Functions and Data Members	2645	=head3 Watcher-Specific Functions and Data Members
2068		2646
2069	=over 4	2647	=over 4
2070		2648
…		…
2128		2706
2129	=head2 C<ev_stat> - did the file attributes just change?	2707	=head2 C<ev_stat> - did the file attributes just change?
2130		2708
2131	This watches a file system path for attribute changes. That is, it calls	2709	This watches a file system path for attribute changes. That is, it calls
2132	C<stat> on that path in regular intervals (or when the OS says it changed)	2710	C<stat> on that path in regular intervals (or when the OS says it changed)
2133	and sees if it changed compared to the last time, invoking the callback if	2711	and sees if it changed compared to the last time, invoking the callback
2134	it did.	2712	if it did. Starting the watcher C<stat>'s the file, so only changes that
		2713	happen after the watcher has been started will be reported.
2135		2714
2136	The path does not need to exist: changing from "path exists" to "path does	2715	The path does not need to exist: changing from "path exists" to "path does
2137	not exist" is a status change like any other. The condition "path does not	2716	not exist" is a status change like any other. The condition "path does not
2138	exist" (or more correctly "path cannot be stat'ed") is signified by the	2717	exist" (or more correctly "path cannot be stat'ed") is signified by the
2139	C<st_nlink> field being zero (which is otherwise always forced to be at	2718	C<st_nlink> field being zero (which is otherwise always forced to be at
…		…
2369	Apart from keeping your process non-blocking (which is a useful	2948	Apart from keeping your process non-blocking (which is a useful
2370	effect on its own sometimes), idle watchers are a good place to do	2949	effect on its own sometimes), idle watchers are a good place to do
2371	"pseudo-background processing", or delay processing stuff to after the	2950	"pseudo-background processing", or delay processing stuff to after the
2372	event loop has handled all outstanding events.	2951	event loop has handled all outstanding events.
2373		2952
		2953	=head3 Abusing an C<ev_idle> watcher for its side-effect
		2954
		2955	As long as there is at least one active idle watcher, libev will never
		2956	sleep unnecessarily. Or in other words, it will loop as fast as possible.
		2957	For this to work, the idle watcher doesn't need to be invoked at all - the
		2958	lowest priority will do.
		2959
		2960	This mode of operation can be useful together with an C<ev_check> watcher,
		2961	to do something on each event loop iteration - for example to balance load
		2962	between different connections.
		2963
		2964	See L</Abusing an ev_check watcher for its side-effect> for a longer
		2965	example.
		2966
2374	=head3 Watcher-Specific Functions and Data Members	2967	=head3 Watcher-Specific Functions and Data Members
2375		2968
2376	=over 4	2969	=over 4
2377		2970
2378	=item ev_idle_init (ev_idle *, callback)	2971	=item ev_idle_init (ev_idle *, callback)
…		…
2389	callback, free it. Also, use no error checking, as usual.	2982	callback, free it. Also, use no error checking, as usual.
2390		2983
2391	static void	2984	static void
2392	idle_cb (struct ev_loop *loop, ev_idle *w, int revents)	2985	idle_cb (struct ev_loop *loop, ev_idle *w, int revents)
2393	{	2986	{
		2987	// stop the watcher
		2988	ev_idle_stop (loop, w);
		2989
		2990	// now we can free it
2394	free (w);	2991	free (w);
		2992
2395	// now do something you wanted to do when the program has	2993	// now do something you wanted to do when the program has
2396	// no longer anything immediate to do.	2994	// no longer anything immediate to do.
2397	}	2995	}
2398		2996
2399	ev_idle *idle_watcher = malloc (sizeof (ev_idle));	2997	ev_idle *idle_watcher = malloc (sizeof (ev_idle));
…		…
2401	ev_idle_start (loop, idle_watcher);	2999	ev_idle_start (loop, idle_watcher);
2402		3000
2403		3001
2404	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!	3002	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!
2405		3003
2406	Prepare and check watchers are usually (but not always) used in pairs:	3004	Prepare and check watchers are often (but not always) used in pairs:
2407	prepare watchers get invoked before the process blocks and check watchers	3005	prepare watchers get invoked before the process blocks and check watchers
2408	afterwards.	3006	afterwards.
2409		3007
2410	You I<must not> call C<ev_loop> or similar functions that enter	3008	You I<must not> call C<ev_run> (or similar functions that enter the
2411	the current event loop from either C<ev_prepare> or C<ev_check>	3009	current event loop) or C<ev_loop_fork> from either C<ev_prepare> or
2412	watchers. Other loops than the current one are fine, however. The	3010	C<ev_check> watchers. Other loops than the current one are fine,
2413	rationale behind this is that you do not need to check for recursion in	3011	however. The rationale behind this is that you do not need to check
2414	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,	3012	for recursion in those watchers, i.e. the sequence will always be
2415	C<ev_check> so if you have one watcher of each kind they will always be	3013	C<ev_prepare>, blocking, C<ev_check> so if you have one watcher of each
2416	called in pairs bracketing the blocking call.	3014	kind they will always be called in pairs bracketing the blocking call.
2417		3015
2418	Their main purpose is to integrate other event mechanisms into libev and	3016	Their main purpose is to integrate other event mechanisms into libev and
2419	their use is somewhat advanced. They could be used, for example, to track	3017	their use is somewhat advanced. They could be used, for example, to track
2420	variable changes, implement your own watchers, integrate net-snmp or a	3018	variable changes, implement your own watchers, integrate net-snmp or a
2421	coroutine library and lots more. They are also occasionally useful if	3019	coroutine library and lots more. They are also occasionally useful if
…		…
2439	with priority higher than or equal to the event loop and one coroutine	3037	with priority higher than or equal to the event loop and one coroutine
2440	of lower priority, but only once, using idle watchers to keep the event	3038	of lower priority, but only once, using idle watchers to keep the event
2441	loop from blocking if lower-priority coroutines are active, thus mapping	3039	loop from blocking if lower-priority coroutines are active, thus mapping
2442	low-priority coroutines to idle/background tasks).	3040	low-priority coroutines to idle/background tasks).
2443		3041
2444	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)	3042	When used for this purpose, it is recommended to give C<ev_check> watchers
2445	priority, to ensure that they are being run before any other watchers	3043	highest (C<EV_MAXPRI>) priority, to ensure that they are being run before
2446	after the poll (this doesn't matter for C<ev_prepare> watchers).	3044	any other watchers after the poll (this doesn't matter for C<ev_prepare>
		3045	watchers).
2447		3046
2448	Also, C<ev_check> watchers (and C<ev_prepare> watchers, too) should not	3047	Also, C<ev_check> watchers (and C<ev_prepare> watchers, too) should not
2449	activate ("feed") events into libev. While libev fully supports this, they	3048	activate ("feed") events into libev. While libev fully supports this, they
2450	might get executed before other C<ev_check> watchers did their job. As	3049	might get executed before other C<ev_check> watchers did their job. As
2451	C<ev_check> watchers are often used to embed other (non-libev) event	3050	C<ev_check> watchers are often used to embed other (non-libev) event
2452	loops those other event loops might be in an unusable state until their	3051	loops those other event loops might be in an unusable state until their
2453	C<ev_check> watcher ran (always remind yourself to coexist peacefully with	3052	C<ev_check> watcher ran (always remind yourself to coexist peacefully with
2454	others).	3053	others).
		3054
		3055	=head3 Abusing an C<ev_check> watcher for its side-effect
		3056
		3057	C<ev_check> (and less often also C<ev_prepare>) watchers can also be
		3058	useful because they are called once per event loop iteration. For
		3059	example, if you want to handle a large number of connections fairly, you
		3060	normally only do a bit of work for each active connection, and if there
		3061	is more work to do, you wait for the next event loop iteration, so other
		3062	connections have a chance of making progress.
		3063
		3064	Using an C<ev_check> watcher is almost enough: it will be called on the
		3065	next event loop iteration. However, that isn't as soon as possible -
		3066	without external events, your C<ev_check> watcher will not be invoked.
		3067
		3068	This is where C<ev_idle> watchers come in handy - all you need is a
		3069	single global idle watcher that is active as long as you have one active
		3070	C<ev_check> watcher. The C<ev_idle> watcher makes sure the event loop
		3071	will not sleep, and the C<ev_check> watcher makes sure a callback gets
		3072	invoked. Neither watcher alone can do that.
2455		3073
2456	=head3 Watcher-Specific Functions and Data Members	3074	=head3 Watcher-Specific Functions and Data Members
2457		3075
2458	=over 4	3076	=over 4
2459		3077
…		…
2583		3201
2584	if (timeout >= 0)	3202	if (timeout >= 0)
2585	// create/start timer	3203	// create/start timer
2586		3204
2587	// poll	3205	// poll
2588	ev_loop (EV_A_ 0);	3206	ev_run (EV_A_ 0);
2589		3207
2590	// stop timer again	3208	// stop timer again
2591	if (timeout >= 0)	3209	if (timeout >= 0)
2592	ev_timer_stop (EV_A_ &to);	3210	ev_timer_stop (EV_A_ &to);
2593		3211
…		…
2660		3278
2661	=over 4	3279	=over 4
2662		3280
2663	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)	3281	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
2664		3282
2665	=item ev_embed_set (ev_embed *, callback, struct ev_loop *embedded_loop)	3283	=item ev_embed_set (ev_embed *, struct ev_loop *embedded_loop)
2666		3284
2667	Configures the watcher to embed the given loop, which must be	3285	Configures the watcher to embed the given loop, which must be
2668	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be	3286	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
2669	invoked automatically, otherwise it is the responsibility of the callback	3287	invoked automatically, otherwise it is the responsibility of the callback
2670	to invoke it (it will continue to be called until the sweep has been done,	3288	to invoke it (it will continue to be called until the sweep has been done,
2671	if you do not want that, you need to temporarily stop the embed watcher).	3289	if you do not want that, you need to temporarily stop the embed watcher).
2672		3290
2673	=item ev_embed_sweep (loop, ev_embed *)	3291	=item ev_embed_sweep (loop, ev_embed *)
2674		3292
2675	Make a single, non-blocking sweep over the embedded loop. This works	3293	Make a single, non-blocking sweep over the embedded loop. This works
2676	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	3294	similarly to C<ev_run (embedded_loop, EVRUN_NOWAIT)>, but in the most
2677	appropriate way for embedded loops.	3295	appropriate way for embedded loops.
2678		3296
2679	=item struct ev_loop *other [read-only]	3297	=item struct ev_loop *other [read-only]
2680		3298
2681	The embedded event loop.	3299	The embedded event loop.
…		…
2691	used).	3309	used).
2692		3310
2693	struct ev_loop *loop_hi = ev_default_init (0);	3311	struct ev_loop *loop_hi = ev_default_init (0);
2694	struct ev_loop *loop_lo = 0;	3312	struct ev_loop *loop_lo = 0;
2695	ev_embed embed;	3313	ev_embed embed;
2696		3314
2697	// see if there is a chance of getting one that works	3315	// see if there is a chance of getting one that works
2698	// (remember that a flags value of 0 means autodetection)	3316	// (remember that a flags value of 0 means autodetection)
2699	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()	3317	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()
2700	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())	3318	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())
2701	: 0;	3319	: 0;
…		…
2715	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).	3333	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
2716		3334
2717	struct ev_loop *loop = ev_default_init (0);	3335	struct ev_loop *loop = ev_default_init (0);
2718	struct ev_loop *loop_socket = 0;	3336	struct ev_loop *loop_socket = 0;
2719	ev_embed embed;	3337	ev_embed embed;
2720		3338
2721	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)	3339	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
2722	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))	3340	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
2723	{	3341	{
2724	ev_embed_init (&embed, 0, loop_socket);	3342	ev_embed_init (&embed, 0, loop_socket);
2725	ev_embed_start (loop, &embed);	3343	ev_embed_start (loop, &embed);
…		…
2733		3351
2734	=head2 C<ev_fork> - the audacity to resume the event loop after a fork	3352	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
2735		3353
2736	Fork watchers are called when a C<fork ()> was detected (usually because	3354	Fork watchers are called when a C<fork ()> was detected (usually because
2737	whoever is a good citizen cared to tell libev about it by calling	3355	whoever is a good citizen cared to tell libev about it by calling
2738	C<ev_default_fork> or C<ev_loop_fork>). The invocation is done before the	3356	C<ev_loop_fork>). The invocation is done before the event loop blocks next
2739	event loop blocks next and before C<ev_check> watchers are being called,	3357	and before C<ev_check> watchers are being called, and only in the child
2740	and only in the child after the fork. If whoever good citizen calling	3358	after the fork. If whoever good citizen calling C<ev_default_fork> cheats
2741	C<ev_default_fork> cheats and calls it in the wrong process, the fork	3359	and calls it in the wrong process, the fork handlers will be invoked, too,
2742	handlers will be invoked, too, of course.	3360	of course.
2743		3361
2744	=head3 The special problem of life after fork - how is it possible?	3362	=head3 The special problem of life after fork - how is it possible?
2745		3363
2746	Most uses of C<fork()> consist of forking, then some simple calls to ste	3364	Most uses of C<fork ()> consist of forking, then some simple calls to set
2747	up/change the process environment, followed by a call to C<exec()>. This	3365	up/change the process environment, followed by a call to C<exec()>. This
2748	sequence should be handled by libev without any problems.	3366	sequence should be handled by libev without any problems.
2749		3367
2750	This changes when the application actually wants to do event handling	3368	This changes when the application actually wants to do event handling
2751	in the child, or both parent in child, in effect "continuing" after the	3369	in the child, or both parent in child, in effect "continuing" after the
…		…
2767	disadvantage of having to use multiple event loops (which do not support	3385	disadvantage of having to use multiple event loops (which do not support
2768	signal watchers).	3386	signal watchers).
2769		3387
2770	When this is not possible, or you want to use the default loop for	3388	When this is not possible, or you want to use the default loop for
2771	other reasons, then in the process that wants to start "fresh", call	3389	other reasons, then in the process that wants to start "fresh", call
2772	C<ev_default_destroy ()> followed by C<ev_default_loop (...)>. Destroying	3390	C<ev_loop_destroy (EV_DEFAULT)> followed by C<ev_default_loop (...)>.
2773	the default loop will "orphan" (not stop) all registered watchers, so you	3391	Destroying the default loop will "orphan" (not stop) all registered
2774	have to be careful not to execute code that modifies those watchers. Note	3392	watchers, so you have to be careful not to execute code that modifies
2775	also that in that case, you have to re-register any signal watchers.	3393	those watchers. Note also that in that case, you have to re-register any
		3394	signal watchers.
2776		3395
2777	=head3 Watcher-Specific Functions and Data Members	3396	=head3 Watcher-Specific Functions and Data Members
2778		3397
2779	=over 4	3398	=over 4
2780		3399
2781	=item ev_fork_init (ev_signal *, callback)	3400	=item ev_fork_init (ev_fork *, callback)
2782		3401
2783	Initialises and configures the fork watcher - it has no parameters of any	3402	Initialises and configures the fork watcher - it has no parameters of any
2784	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	3403	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
2785	believe me.	3404	really.
2786		3405
2787	=back	3406	=back
2788		3407
2789		3408
		3409	=head2 C<ev_cleanup> - even the best things end
		3410
		3411	Cleanup watchers are called just before the event loop is being destroyed
		3412	by a call to C<ev_loop_destroy>.
		3413
		3414	While there is no guarantee that the event loop gets destroyed, cleanup
		3415	watchers provide a convenient method to install cleanup hooks for your
		3416	program, worker threads and so on - you just to make sure to destroy the
		3417	loop when you want them to be invoked.
		3418
		3419	Cleanup watchers are invoked in the same way as any other watcher. Unlike
		3420	all other watchers, they do not keep a reference to the event loop (which
		3421	makes a lot of sense if you think about it). Like all other watchers, you
		3422	can call libev functions in the callback, except C<ev_cleanup_start>.
		3423
		3424	=head3 Watcher-Specific Functions and Data Members
		3425
		3426	=over 4
		3427
		3428	=item ev_cleanup_init (ev_cleanup *, callback)
		3429
		3430	Initialises and configures the cleanup watcher - it has no parameters of
		3431	any kind. There is a C<ev_cleanup_set> macro, but using it is utterly
		3432	pointless, I assure you.
		3433
		3434	=back
		3435
		3436	Example: Register an atexit handler to destroy the default loop, so any
		3437	cleanup functions are called.
		3438
		3439	static void
		3440	program_exits (void)
		3441	{
		3442	ev_loop_destroy (EV_DEFAULT_UC);
		3443	}
		3444
		3445	...
		3446	atexit (program_exits);
		3447
		3448
2790	=head2 C<ev_async> - how to wake up another event loop	3449	=head2 C<ev_async> - how to wake up an event loop
2791		3450
2792	In general, you cannot use an C<ev_loop> from multiple threads or other	3451	In general, you cannot use an C<ev_loop> from multiple threads or other
2793	asynchronous sources such as signal handlers (as opposed to multiple event	3452	asynchronous sources such as signal handlers (as opposed to multiple event
2794	loops - those are of course safe to use in different threads).	3453	loops - those are of course safe to use in different threads).
2795		3454
2796	Sometimes, however, you need to wake up another event loop you do not	3455	Sometimes, however, you need to wake up an event loop you do not control,
2797	control, for example because it belongs to another thread. This is what	3456	for example because it belongs to another thread. This is what C<ev_async>
2798	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you	3457	watchers do: as long as the C<ev_async> watcher is active, you can signal
2799	can signal it by calling C<ev_async_send>, which is thread- and signal	3458	it by calling C<ev_async_send>, which is thread- and signal safe.
2800	safe.
2801		3459
2802	This functionality is very similar to C<ev_signal> watchers, as signals,	3460	This functionality is very similar to C<ev_signal> watchers, as signals,
2803	too, are asynchronous in nature, and signals, too, will be compressed	3461	too, are asynchronous in nature, and signals, too, will be compressed
2804	(i.e. the number of callback invocations may be less than the number of	3462	(i.e. the number of callback invocations may be less than the number of
2805	C<ev_async_sent> calls).	3463	C<ev_async_send> calls). In fact, you could use signal watchers as a kind
2806		3464	of "global async watchers" by using a watcher on an otherwise unused
2807	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not	3465	signal, and C<ev_feed_signal> to signal this watcher from another thread,
2808	just the default loop.	3466	even without knowing which loop owns the signal.
2809		3467
2810	=head3 Queueing	3468	=head3 Queueing
2811		3469
2812	C<ev_async> does not support queueing of data in any way. The reason	3470	C<ev_async> does not support queueing of data in any way. The reason
2813	is that the author does not know of a simple (or any) algorithm for a	3471	is that the author does not know of a simple (or any) algorithm for a
2814	multiple-writer-single-reader queue that works in all cases and doesn't	3472	multiple-writer-single-reader queue that works in all cases and doesn't
2815	need elaborate support such as pthreads.	3473	need elaborate support such as pthreads or unportable memory access
		3474	semantics.
2816		3475
2817	That means that if you want to queue data, you have to provide your own	3476	That means that if you want to queue data, you have to provide your own
2818	queue. But at least I can tell you how to implement locking around your	3477	queue. But at least I can tell you how to implement locking around your
2819	queue:	3478	queue:
2820		3479
…		…
2904	trust me.	3563	trust me.
2905		3564
2906	=item ev_async_send (loop, ev_async *)	3565	=item ev_async_send (loop, ev_async *)
2907		3566
2908	Sends/signals/activates the given C<ev_async> watcher, that is, feeds	3567	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
2909	an C<EV_ASYNC> event on the watcher into the event loop. Unlike	3568	an C<EV_ASYNC> event on the watcher into the event loop, and instantly
		3569	returns.
		3570
2910	C<ev_feed_event>, this call is safe to do from other threads, signal or	3571	Unlike C<ev_feed_event>, this call is safe to do from other threads,
2911	similar contexts (see the discussion of C<EV_ATOMIC_T> in the embedding	3572	signal or similar contexts (see the discussion of C<EV_ATOMIC_T> in the
2912	section below on what exactly this means).	3573	embedding section below on what exactly this means).
2913		3574
2914	Note that, as with other watchers in libev, multiple events might get	3575	Note that, as with other watchers in libev, multiple events might get
2915	compressed into a single callback invocation (another way to look at this	3576	compressed into a single callback invocation (another way to look at
2916	is that C<ev_async> watchers are level-triggered, set on C<ev_async_send>,	3577	this is that C<ev_async> watchers are level-triggered: they are set on
2917	reset when the event loop detects that).	3578	C<ev_async_send>, reset when the event loop detects that).
2918		3579
2919	This call incurs the overhead of a system call only once per event loop	3580	This call incurs the overhead of at most one extra system call per event
2920	iteration, so while the overhead might be noticeable, it doesn't apply to	3581	loop iteration, if the event loop is blocked, and no syscall at all if
2921	repeated calls to C<ev_async_send> for the same event loop.	3582	the event loop (or your program) is processing events. That means that
		3583	repeated calls are basically free (there is no need to avoid calls for
		3584	performance reasons) and that the overhead becomes smaller (typically
		3585	zero) under load.
2922		3586
2923	=item bool = ev_async_pending (ev_async *)	3587	=item bool = ev_async_pending (ev_async *)
2924		3588
2925	Returns a non-zero value when C<ev_async_send> has been called on the	3589	Returns a non-zero value when C<ev_async_send> has been called on the
2926	watcher but the event has not yet been processed (or even noted) by the	3590	watcher but the event has not yet been processed (or even noted) by the
…		…
2943		3607
2944	There are some other functions of possible interest. Described. Here. Now.	3608	There are some other functions of possible interest. Described. Here. Now.
2945		3609
2946	=over 4	3610	=over 4
2947		3611
2948	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback)	3612	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback, arg)
2949		3613
2950	This function combines a simple timer and an I/O watcher, calls your	3614	This function combines a simple timer and an I/O watcher, calls your
2951	callback on whichever event happens first and automatically stops both	3615	callback on whichever event happens first and automatically stops both
2952	watchers. This is useful if you want to wait for a single event on an fd	3616	watchers. This is useful if you want to wait for a single event on an fd
2953	or timeout without having to allocate/configure/start/stop/free one or	3617	or timeout without having to allocate/configure/start/stop/free one or
…		…
2959		3623
2960	If C<timeout> is less than 0, then no timeout watcher will be	3624	If C<timeout> is less than 0, then no timeout watcher will be
2961	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and	3625	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
2962	repeat = 0) will be started. C<0> is a valid timeout.	3626	repeat = 0) will be started. C<0> is a valid timeout.
2963		3627
2964	The callback has the type C<void (*cb)(int revents, void *arg)> and gets	3628	The callback has the type C<void (*cb)(int revents, void *arg)> and is
2965	passed an C<revents> set like normal event callbacks (a combination of	3629	passed an C<revents> set like normal event callbacks (a combination of
2966	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>	3630	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMER>) and the C<arg>
2967	value passed to C<ev_once>. Note that it is possible to receive I<both>	3631	value passed to C<ev_once>. Note that it is possible to receive I<both>
2968	a timeout and an io event at the same time - you probably should give io	3632	a timeout and an io event at the same time - you probably should give io
2969	events precedence.	3633	events precedence.
2970		3634
2971	Example: wait up to ten seconds for data to appear on STDIN_FILENO.	3635	Example: wait up to ten seconds for data to appear on STDIN_FILENO.
2972		3636
2973	static void stdin_ready (int revents, void *arg)	3637	static void stdin_ready (int revents, void *arg)
2974	{	3638	{
2975	if (revents & EV_READ)	3639	if (revents & EV_READ)
2976	/* stdin might have data for us, joy! */;	3640	/* stdin might have data for us, joy! */;
2977	else if (revents & EV_TIMEOUT)	3641	else if (revents & EV_TIMER)
2978	/* doh, nothing entered */;	3642	/* doh, nothing entered */;
2979	}	3643	}
2980		3644
2981	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	3645	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
2982		3646
2983	=item ev_feed_event (struct ev_loop *, watcher *, int revents)
2984
2985	Feeds the given event set into the event loop, as if the specified event
2986	had happened for the specified watcher (which must be a pointer to an
2987	initialised but not necessarily started event watcher).
2988
2989	=item ev_feed_fd_event (struct ev_loop *, int fd, int revents)	3647	=item ev_feed_fd_event (loop, int fd, int revents)
2990		3648
2991	Feed an event on the given fd, as if a file descriptor backend detected	3649	Feed an event on the given fd, as if a file descriptor backend detected
2992	the given events it.	3650	the given events.
2993		3651
2994	=item ev_feed_signal_event (struct ev_loop *loop, int signum)	3652	=item ev_feed_signal_event (loop, int signum)
2995		3653
2996	Feed an event as if the given signal occurred (C<loop> must be the default	3654	Feed an event as if the given signal occurred. See also C<ev_feed_signal>,
2997	loop!).	3655	which is async-safe.
2998		3656
2999	=back	3657	=back
		3658
		3659
		3660	=head1 COMMON OR USEFUL IDIOMS (OR BOTH)
		3661
		3662	This section explains some common idioms that are not immediately
		3663	obvious. Note that examples are sprinkled over the whole manual, and this
		3664	section only contains stuff that wouldn't fit anywhere else.
		3665
		3666	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
		3667
		3668	Each watcher has, by default, a C<void *data> member that you can read
		3669	or modify at any time: libev will completely ignore it. This can be used
		3670	to associate arbitrary data with your watcher. If you need more data and
		3671	don't want to allocate memory separately and store a pointer to it in that
		3672	data member, you can also "subclass" the watcher type and provide your own
		3673	data:
		3674
		3675	struct my_io
		3676	{
		3677	ev_io io;
		3678	int otherfd;
		3679	void *somedata;
		3680	struct whatever *mostinteresting;
		3681	};
		3682
		3683	...
		3684	struct my_io w;
		3685	ev_io_init (&w.io, my_cb, fd, EV_READ);
		3686
		3687	And since your callback will be called with a pointer to the watcher, you
		3688	can cast it back to your own type:
		3689
		3690	static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)
		3691	{
		3692	struct my_io *w = (struct my_io *)w_;
		3693	...
		3694	}
		3695
		3696	More interesting and less C-conformant ways of casting your callback
		3697	function type instead have been omitted.
		3698
		3699	=head2 BUILDING YOUR OWN COMPOSITE WATCHERS
		3700
		3701	Another common scenario is to use some data structure with multiple
		3702	embedded watchers, in effect creating your own watcher that combines
		3703	multiple libev event sources into one "super-watcher":
		3704
		3705	struct my_biggy
		3706	{
		3707	int some_data;
		3708	ev_timer t1;
		3709	ev_timer t2;
		3710	}
		3711
		3712	In this case getting the pointer to C<my_biggy> is a bit more
		3713	complicated: Either you store the address of your C<my_biggy> struct in
		3714	the C<data> member of the watcher (for woozies or C++ coders), or you need
		3715	to use some pointer arithmetic using C<offsetof> inside your watchers (for
		3716	real programmers):
		3717
		3718	#include <stddef.h>
		3719
		3720	static void
		3721	t1_cb (EV_P_ ev_timer *w, int revents)
		3722	{
		3723	struct my_biggy big = (struct my_biggy *)
		3724	(((char *)w) - offsetof (struct my_biggy, t1));
		3725	}
		3726
		3727	static void
		3728	t2_cb (EV_P_ ev_timer *w, int revents)
		3729	{
		3730	struct my_biggy big = (struct my_biggy *)
		3731	(((char *)w) - offsetof (struct my_biggy, t2));
		3732	}
		3733
		3734	=head2 AVOIDING FINISHING BEFORE RETURNING
		3735
		3736	Often you have structures like this in event-based programs:
		3737
		3738	callback ()
		3739	{
		3740	free (request);
		3741	}
		3742
		3743	request = start_new_request (..., callback);
		3744
		3745	The intent is to start some "lengthy" operation. The C<request> could be
		3746	used to cancel the operation, or do other things with it.
		3747
		3748	It's not uncommon to have code paths in C<start_new_request> that
		3749	immediately invoke the callback, for example, to report errors. Or you add
		3750	some caching layer that finds that it can skip the lengthy aspects of the
		3751	operation and simply invoke the callback with the result.
		3752
		3753	The problem here is that this will happen I<before> C<start_new_request>
		3754	has returned, so C<request> is not set.
		3755
		3756	Even if you pass the request by some safer means to the callback, you
		3757	might want to do something to the request after starting it, such as
		3758	canceling it, which probably isn't working so well when the callback has
		3759	already been invoked.
		3760
		3761	A common way around all these issues is to make sure that
		3762	C<start_new_request> I<always> returns before the callback is invoked. If
		3763	C<start_new_request> immediately knows the result, it can artificially
		3764	delay invoking the callback by using a C<prepare> or C<idle> watcher for
		3765	example, or more sneakily, by reusing an existing (stopped) watcher and
		3766	pushing it into the pending queue:
		3767
		3768	ev_set_cb (watcher, callback);
		3769	ev_feed_event (EV_A_ watcher, 0);
		3770
		3771	This way, C<start_new_request> can safely return before the callback is
		3772	invoked, while not delaying callback invocation too much.
		3773
		3774	=head2 MODEL/NESTED EVENT LOOP INVOCATIONS AND EXIT CONDITIONS
		3775
		3776	Often (especially in GUI toolkits) there are places where you have
		3777	I<modal> interaction, which is most easily implemented by recursively
		3778	invoking C<ev_run>.
		3779
		3780	This brings the problem of exiting - a callback might want to finish the
		3781	main C<ev_run> call, but not the nested one (e.g. user clicked "Quit", but
		3782	a modal "Are you sure?" dialog is still waiting), or just the nested one
		3783	and not the main one (e.g. user clocked "Ok" in a modal dialog), or some
		3784	other combination: In these cases, a simple C<ev_break> will not work.
		3785
		3786	The solution is to maintain "break this loop" variable for each C<ev_run>
		3787	invocation, and use a loop around C<ev_run> until the condition is
		3788	triggered, using C<EVRUN_ONCE>:
		3789
		3790	// main loop
		3791	int exit_main_loop = 0;
		3792
		3793	while (!exit_main_loop)
		3794	ev_run (EV_DEFAULT_ EVRUN_ONCE);
		3795
		3796	// in a modal watcher
		3797	int exit_nested_loop = 0;
		3798
		3799	while (!exit_nested_loop)
		3800	ev_run (EV_A_ EVRUN_ONCE);
		3801
		3802	To exit from any of these loops, just set the corresponding exit variable:
		3803
		3804	// exit modal loop
		3805	exit_nested_loop = 1;
		3806
		3807	// exit main program, after modal loop is finished
		3808	exit_main_loop = 1;
		3809
		3810	// exit both
		3811	exit_main_loop = exit_nested_loop = 1;
		3812
		3813	=head2 THREAD LOCKING EXAMPLE
		3814
		3815	Here is a fictitious example of how to run an event loop in a different
		3816	thread from where callbacks are being invoked and watchers are
		3817	created/added/removed.
		3818
		3819	For a real-world example, see the C<EV::Loop::Async> perl module,
		3820	which uses exactly this technique (which is suited for many high-level
		3821	languages).
		3822
		3823	The example uses a pthread mutex to protect the loop data, a condition
		3824	variable to wait for callback invocations, an async watcher to notify the
		3825	event loop thread and an unspecified mechanism to wake up the main thread.
		3826
		3827	First, you need to associate some data with the event loop:
		3828
		3829	typedef struct {
		3830	mutex_t lock; /* global loop lock */
		3831	ev_async async_w;
		3832	thread_t tid;
		3833	cond_t invoke_cv;
		3834	} userdata;
		3835
		3836	void prepare_loop (EV_P)
		3837	{
		3838	// for simplicity, we use a static userdata struct.
		3839	static userdata u;
		3840
		3841	ev_async_init (&u->async_w, async_cb);
		3842	ev_async_start (EV_A_ &u->async_w);
		3843
		3844	pthread_mutex_init (&u->lock, 0);
		3845	pthread_cond_init (&u->invoke_cv, 0);
		3846
		3847	// now associate this with the loop
		3848	ev_set_userdata (EV_A_ u);
		3849	ev_set_invoke_pending_cb (EV_A_ l_invoke);
		3850	ev_set_loop_release_cb (EV_A_ l_release, l_acquire);
		3851
		3852	// then create the thread running ev_run
		3853	pthread_create (&u->tid, 0, l_run, EV_A);
		3854	}
		3855
		3856	The callback for the C<ev_async> watcher does nothing: the watcher is used
		3857	solely to wake up the event loop so it takes notice of any new watchers
		3858	that might have been added:
		3859
		3860	static void
		3861	async_cb (EV_P_ ev_async *w, int revents)
		3862	{
		3863	// just used for the side effects
		3864	}
		3865
		3866	The C<l_release> and C<l_acquire> callbacks simply unlock/lock the mutex
		3867	protecting the loop data, respectively.
		3868
		3869	static void
		3870	l_release (EV_P)
		3871	{
		3872	userdata *u = ev_userdata (EV_A);
		3873	pthread_mutex_unlock (&u->lock);
		3874	}
		3875
		3876	static void
		3877	l_acquire (EV_P)
		3878	{
		3879	userdata *u = ev_userdata (EV_A);
		3880	pthread_mutex_lock (&u->lock);
		3881	}
		3882
		3883	The event loop thread first acquires the mutex, and then jumps straight
		3884	into C<ev_run>:
		3885
		3886	void *
		3887	l_run (void *thr_arg)
		3888	{
		3889	struct ev_loop *loop = (struct ev_loop *)thr_arg;
		3890
		3891	l_acquire (EV_A);
		3892	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
		3893	ev_run (EV_A_ 0);
		3894	l_release (EV_A);
		3895
		3896	return 0;
		3897	}
		3898
		3899	Instead of invoking all pending watchers, the C<l_invoke> callback will
		3900	signal the main thread via some unspecified mechanism (signals? pipe
		3901	writes? C<Async::Interrupt>?) and then waits until all pending watchers
		3902	have been called (in a while loop because a) spurious wakeups are possible
		3903	and b) skipping inter-thread-communication when there are no pending
		3904	watchers is very beneficial):
		3905
		3906	static void
		3907	l_invoke (EV_P)
		3908	{
		3909	userdata *u = ev_userdata (EV_A);
		3910
		3911	while (ev_pending_count (EV_A))
		3912	{
		3913	wake_up_other_thread_in_some_magic_or_not_so_magic_way ();
		3914	pthread_cond_wait (&u->invoke_cv, &u->lock);
		3915	}
		3916	}
		3917
		3918	Now, whenever the main thread gets told to invoke pending watchers, it
		3919	will grab the lock, call C<ev_invoke_pending> and then signal the loop
		3920	thread to continue:
		3921
		3922	static void
		3923	real_invoke_pending (EV_P)
		3924	{
		3925	userdata *u = ev_userdata (EV_A);
		3926
		3927	pthread_mutex_lock (&u->lock);
		3928	ev_invoke_pending (EV_A);
		3929	pthread_cond_signal (&u->invoke_cv);
		3930	pthread_mutex_unlock (&u->lock);
		3931	}
		3932
		3933	Whenever you want to start/stop a watcher or do other modifications to an
		3934	event loop, you will now have to lock:
		3935
		3936	ev_timer timeout_watcher;
		3937	userdata *u = ev_userdata (EV_A);
		3938
		3939	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
		3940
		3941	pthread_mutex_lock (&u->lock);
		3942	ev_timer_start (EV_A_ &timeout_watcher);
		3943	ev_async_send (EV_A_ &u->async_w);
		3944	pthread_mutex_unlock (&u->lock);
		3945
		3946	Note that sending the C<ev_async> watcher is required because otherwise
		3947	an event loop currently blocking in the kernel will have no knowledge
		3948	about the newly added timer. By waking up the loop it will pick up any new
		3949	watchers in the next event loop iteration.
		3950
		3951	=head2 THREADS, COROUTINES, CONTINUATIONS, QUEUES... INSTEAD OF CALLBACKS
		3952
		3953	While the overhead of a callback that e.g. schedules a thread is small, it
		3954	is still an overhead. If you embed libev, and your main usage is with some
		3955	kind of threads or coroutines, you might want to customise libev so that
		3956	doesn't need callbacks anymore.
		3957
		3958	Imagine you have coroutines that you can switch to using a function
		3959	C<switch_to (coro)>, that libev runs in a coroutine called C<libev_coro>
		3960	and that due to some magic, the currently active coroutine is stored in a
		3961	global called C<current_coro>. Then you can build your own "wait for libev
		3962	event" primitive by changing C<EV_CB_DECLARE> and C<EV_CB_INVOKE> (note
		3963	the differing C<;> conventions):
		3964
		3965	#define EV_CB_DECLARE(type) struct my_coro *cb;
		3966	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)
		3967
		3968	That means instead of having a C callback function, you store the
		3969	coroutine to switch to in each watcher, and instead of having libev call
		3970	your callback, you instead have it switch to that coroutine.
		3971
		3972	A coroutine might now wait for an event with a function called
		3973	C<wait_for_event>. (the watcher needs to be started, as always, but it doesn't
		3974	matter when, or whether the watcher is active or not when this function is
		3975	called):
		3976
		3977	void
		3978	wait_for_event (ev_watcher *w)
		3979	{
		3980	ev_set_cb (w, current_coro);
		3981	switch_to (libev_coro);
		3982	}
		3983
		3984	That basically suspends the coroutine inside C<wait_for_event> and
		3985	continues the libev coroutine, which, when appropriate, switches back to
		3986	this or any other coroutine.
		3987
		3988	You can do similar tricks if you have, say, threads with an event queue -
		3989	instead of storing a coroutine, you store the queue object and instead of
		3990	switching to a coroutine, you push the watcher onto the queue and notify
		3991	any waiters.
		3992
		3993	To embed libev, see L</EMBEDDING>, but in short, it's easiest to create two
		3994	files, F<my_ev.h> and F<my_ev.c> that include the respective libev files:
		3995
		3996	// my_ev.h
		3997	#define EV_CB_DECLARE(type) struct my_coro *cb;
		3998	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)
		3999	#include "../libev/ev.h"
		4000
		4001	// my_ev.c
		4002	#define EV_H "my_ev.h"
		4003	#include "../libev/ev.c"
		4004
		4005	And then use F<my_ev.h> when you would normally use F<ev.h>, and compile
		4006	F<my_ev.c> into your project. When properly specifying include paths, you
		4007	can even use F<ev.h> as header file name directly.
3000		4008
3001		4009
3002	=head1 LIBEVENT EMULATION	4010	=head1 LIBEVENT EMULATION
3003		4011
3004	Libev offers a compatibility emulation layer for libevent. It cannot	4012	Libev offers a compatibility emulation layer for libevent. It cannot
3005	emulate the internals of libevent, so here are some usage hints:	4013	emulate the internals of libevent, so here are some usage hints:
3006		4014
3007	=over 4	4015	=over 4
		4016
		4017	=item * Only the libevent-1.4.1-beta API is being emulated.
		4018
		4019	This was the newest libevent version available when libev was implemented,
		4020	and is still mostly unchanged in 2010.
3008		4021
3009	=item * Use it by including <event.h>, as usual.	4022	=item * Use it by including <event.h>, as usual.
3010		4023
3011	=item * The following members are fully supported: ev_base, ev_callback,	4024	=item * The following members are fully supported: ev_base, ev_callback,
3012	ev_arg, ev_fd, ev_res, ev_events.	4025	ev_arg, ev_fd, ev_res, ev_events.
…		…
3018	=item * Priorities are not currently supported. Initialising priorities	4031	=item * Priorities are not currently supported. Initialising priorities
3019	will fail and all watchers will have the same priority, even though there	4032	will fail and all watchers will have the same priority, even though there
3020	is an ev_pri field.	4033	is an ev_pri field.
3021		4034
3022	=item * In libevent, the last base created gets the signals, in libev, the	4035	=item * In libevent, the last base created gets the signals, in libev, the
3023	first base created (== the default loop) gets the signals.	4036	base that registered the signal gets the signals.
3024		4037
3025	=item * Other members are not supported.	4038	=item * Other members are not supported.
3026		4039
3027	=item * The libev emulation is I<not> ABI compatible to libevent, you need	4040	=item * The libev emulation is I<not> ABI compatible to libevent, you need
3028	to use the libev header file and library.	4041	to use the libev header file and library.
3029		4042
3030	=back	4043	=back
3031		4044
3032	=head1 C++ SUPPORT	4045	=head1 C++ SUPPORT
		4046
		4047	=head2 C API
		4048
		4049	The normal C API should work fine when used from C++: both ev.h and the
		4050	libev sources can be compiled as C++. Therefore, code that uses the C API
		4051	will work fine.
		4052
		4053	Proper exception specifications might have to be added to callbacks passed
		4054	to libev: exceptions may be thrown only from watcher callbacks, all other
		4055	callbacks (allocator, syserr, loop acquire/release and periodic reschedule
		4056	callbacks) must not throw exceptions, and might need a C<noexcept>
		4057	specification. If you have code that needs to be compiled as both C and
		4058	C++ you can use the C<EV_NOEXCEPT> macro for this:
		4059
		4060	static void
		4061	fatal_error (const char *msg) EV_NOEXCEPT
		4062	{
		4063	perror (msg);
		4064	abort ();
		4065	}
		4066
		4067	...
		4068	ev_set_syserr_cb (fatal_error);
		4069
		4070	The only API functions that can currently throw exceptions are C<ev_run>,
		4071	C<ev_invoke>, C<ev_invoke_pending> and C<ev_loop_destroy> (the latter
		4072	because it runs cleanup watchers).
		4073
		4074	Throwing exceptions in watcher callbacks is only supported if libev itself
		4075	is compiled with a C++ compiler or your C and C++ environments allow
		4076	throwing exceptions through C libraries (most do).
		4077
		4078	=head2 C++ API
3033		4079
3034	Libev comes with some simplistic wrapper classes for C++ that mainly allow	4080	Libev comes with some simplistic wrapper classes for C++ that mainly allow
3035	you to use some convenience methods to start/stop watchers and also change	4081	you to use some convenience methods to start/stop watchers and also change
3036	the callback model to a model using method callbacks on objects.	4082	the callback model to a model using method callbacks on objects.
3037		4083
3038	To use it,	4084	To use it,
3039		4085
3040	#include <ev++.h>	4086	#include <ev++.h>
3041		4087
3042	This automatically includes F<ev.h> and puts all of its definitions (many	4088	This automatically includes F<ev.h> and puts all of its definitions (many
3043	of them macros) into the global namespace. All C++ specific things are	4089	of them macros) into the global namespace. All C++ specific things are
3044	put into the C<ev> namespace. It should support all the same embedding	4090	put into the C<ev> namespace. It should support all the same embedding
…		…
3047	Care has been taken to keep the overhead low. The only data member the C++	4093	Care has been taken to keep the overhead low. The only data member the C++
3048	classes add (compared to plain C-style watchers) is the event loop pointer	4094	classes add (compared to plain C-style watchers) is the event loop pointer
3049	that the watcher is associated with (or no additional members at all if	4095	that the watcher is associated with (or no additional members at all if
3050	you disable C<EV_MULTIPLICITY> when embedding libev).	4096	you disable C<EV_MULTIPLICITY> when embedding libev).
3051		4097
3052	Currently, functions, and static and non-static member functions can be	4098	Currently, functions, static and non-static member functions and classes
3053	used as callbacks. Other types should be easy to add as long as they only	4099	with C<operator ()> can be used as callbacks. Other types should be easy
3054	need one additional pointer for context. If you need support for other	4100	to add as long as they only need one additional pointer for context. If
3055	types of functors please contact the author (preferably after implementing	4101	you need support for other types of functors please contact the author
3056	it).	4102	(preferably after implementing it).
		4103
		4104	For all this to work, your C++ compiler either has to use the same calling
		4105	conventions as your C compiler (for static member functions), or you have
		4106	to embed libev and compile libev itself as C++.
3057		4107
3058	Here is a list of things available in the C<ev> namespace:	4108	Here is a list of things available in the C<ev> namespace:
3059		4109
3060	=over 4	4110	=over 4
3061		4111
…		…
3071	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.	4121	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.
3072		4122
3073	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of	4123	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of
3074	the same name in the C<ev> namespace, with the exception of C<ev_signal>	4124	the same name in the C<ev> namespace, with the exception of C<ev_signal>
3075	which is called C<ev::sig> to avoid clashes with the C<signal> macro	4125	which is called C<ev::sig> to avoid clashes with the C<signal> macro
3076	defines by many implementations.	4126	defined by many implementations.
3077		4127
3078	All of those classes have these methods:	4128	All of those classes have these methods:
3079		4129
3080	=over 4	4130	=over 4
3081		4131
3082	=item ev::TYPE::TYPE ()	4132	=item ev::TYPE::TYPE ()
3083		4133
3084	=item ev::TYPE::TYPE (struct ev_loop *)	4134	=item ev::TYPE::TYPE (loop)
3085		4135
3086	=item ev::TYPE::~TYPE	4136	=item ev::TYPE::~TYPE
3087		4137
3088	The constructor (optionally) takes an event loop to associate the watcher	4138	The constructor (optionally) takes an event loop to associate the watcher
3089	with. If it is omitted, it will use C<EV_DEFAULT>.	4139	with. If it is omitted, it will use C<EV_DEFAULT>.
…		…
3122	myclass obj;	4172	myclass obj;
3123	ev::io iow;	4173	ev::io iow;
3124	iow.set <myclass, &myclass::io_cb> (&obj);	4174	iow.set <myclass, &myclass::io_cb> (&obj);
3125		4175
3126	=item w->set (object *)	4176	=item w->set (object *)
3127
3128	This is an B<experimental> feature that might go away in a future version.
3129		4177
3130	This is a variation of a method callback - leaving out the method to call	4178	This is a variation of a method callback - leaving out the method to call
3131	will default the method to C<operator ()>, which makes it possible to use	4179	will default the method to C<operator ()>, which makes it possible to use
3132	functor objects without having to manually specify the C<operator ()> all	4180	functor objects without having to manually specify the C<operator ()> all
3133	the time. Incidentally, you can then also leave out the template argument	4181	the time. Incidentally, you can then also leave out the template argument
…		…
3145	void operator() (ev::io &w, int revents)	4193	void operator() (ev::io &w, int revents)
3146	{	4194	{
3147	...	4195	...
3148	}	4196	}
3149	}	4197	}
3150		4198
3151	myfunctor f;	4199	myfunctor f;
3152		4200
3153	ev::io w;	4201	ev::io w;
3154	w.set (&f);	4202	w.set (&f);
3155		4203
…		…
3166	Example: Use a plain function as callback.	4214	Example: Use a plain function as callback.
3167		4215
3168	static void io_cb (ev::io &w, int revents) { }	4216	static void io_cb (ev::io &w, int revents) { }
3169	iow.set <io_cb> ();	4217	iow.set <io_cb> ();
3170		4218
3171	=item w->set (struct ev_loop *)	4219	=item w->set (loop)
3172		4220
3173	Associates a different C<struct ev_loop> with this watcher. You can only	4221	Associates a different C<struct ev_loop> with this watcher. You can only
3174	do this when the watcher is inactive (and not pending either).	4222	do this when the watcher is inactive (and not pending either).
3175		4223
3176	=item w->set ([arguments])	4224	=item w->set ([arguments])
3177		4225
3178	Basically the same as C<ev_TYPE_set>, with the same arguments. Must be	4226	Basically the same as C<ev_TYPE_set> (except for C<ev::embed> watchers>),
		4227	with the same arguments. Either this method or a suitable start method
3179	called at least once. Unlike the C counterpart, an active watcher gets	4228	must be called at least once. Unlike the C counterpart, an active watcher
3180	automatically stopped and restarted when reconfiguring it with this	4229	gets automatically stopped and restarted when reconfiguring it with this
3181	method.	4230	method.
		4231
		4232	For C<ev::embed> watchers this method is called C<set_embed>, to avoid
		4233	clashing with the C<set (loop)> method.
3182		4234
3183	=item w->start ()	4235	=item w->start ()
3184		4236
3185	Starts the watcher. Note that there is no C<loop> argument, as the	4237	Starts the watcher. Note that there is no C<loop> argument, as the
3186	constructor already stores the event loop.	4238	constructor already stores the event loop.
3187		4239
		4240	=item w->start ([arguments])
		4241
		4242	Instead of calling C<set> and C<start> methods separately, it is often
		4243	convenient to wrap them in one call. Uses the same type of arguments as
		4244	the configure C<set> method of the watcher.
		4245
3188	=item w->stop ()	4246	=item w->stop ()
3189		4247
3190	Stops the watcher if it is active. Again, no C<loop> argument.	4248	Stops the watcher if it is active. Again, no C<loop> argument.
3191		4249
3192	=item w->again () (C<ev::timer>, C<ev::periodic> only)	4250	=item w->again () (C<ev::timer>, C<ev::periodic> only)
…		…
3204		4262
3205	=back	4263	=back
3206		4264
3207	=back	4265	=back
3208		4266
3209	Example: Define a class with an IO and idle watcher, start one of them in	4267	Example: Define a class with two I/O and idle watchers, start the I/O
3210	the constructor.	4268	watchers in the constructor.
3211		4269
3212	class myclass	4270	class myclass
3213	{	4271	{
3214	ev::io io ; void io_cb (ev::io &w, int revents);	4272	ev::io io ; void io_cb (ev::io &w, int revents);
		4273	ev::io io2 ; void io2_cb (ev::io &w, int revents);
3215	ev::idle idle; void idle_cb (ev::idle &w, int revents);	4274	ev::idle idle; void idle_cb (ev::idle &w, int revents);
3216		4275
3217	myclass (int fd)	4276	myclass (int fd)
3218	{	4277	{
3219	io .set <myclass, &myclass::io_cb > (this);	4278	io .set <myclass, &myclass::io_cb > (this);
		4279	io2 .set <myclass, &myclass::io2_cb > (this);
3220	idle.set <myclass, &myclass::idle_cb> (this);	4280	idle.set <myclass, &myclass::idle_cb> (this);
3221		4281
3222	io.start (fd, ev::READ);	4282	io.set (fd, ev::WRITE); // configure the watcher
		4283	io.start (); // start it whenever convenient
		4284
		4285	io2.start (fd, ev::READ); // set + start in one call
3223	}	4286	}
3224	};	4287	};
3225		4288
3226		4289
3227	=head1 OTHER LANGUAGE BINDINGS	4290	=head1 OTHER LANGUAGE BINDINGS
…		…
3266	L<http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hlibev>.	4329	L<http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hlibev>.
3267		4330
3268	=item D	4331	=item D
3269		4332
3270	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to	4333	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
3271	be found at L<http://proj.llucax.com.ar/wiki/evd>.	4334	be found at L<http://www.llucax.com.ar/proj/ev.d/index.html>.
3272		4335
3273	=item Ocaml	4336	=item Ocaml
3274		4337
3275	Erkki Seppala has written Ocaml bindings for libev, to be found at	4338	Erkki Seppala has written Ocaml bindings for libev, to be found at
3276	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.	4339	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.
		4340
		4341	=item Lua
		4342
		4343	Brian Maher has written a partial interface to libev for lua (at the
		4344	time of this writing, only C<ev_io> and C<ev_timer>), to be found at
		4345	L<http://github.com/brimworks/lua-ev>.
		4346
		4347	=item Javascript
		4348
		4349	Node.js (L<http://nodejs.org>) uses libev as the underlying event library.
		4350
		4351	=item Others
		4352
		4353	There are others, and I stopped counting.
3277		4354
3278	=back	4355	=back
3279		4356
3280		4357
3281	=head1 MACRO MAGIC	4358	=head1 MACRO MAGIC
…		…
3295	loop argument"). The C<EV_A> form is used when this is the sole argument,	4372	loop argument"). The C<EV_A> form is used when this is the sole argument,
3296	C<EV_A_> is used when other arguments are following. Example:	4373	C<EV_A_> is used when other arguments are following. Example:
3297		4374
3298	ev_unref (EV_A);	4375	ev_unref (EV_A);
3299	ev_timer_add (EV_A_ watcher);	4376	ev_timer_add (EV_A_ watcher);
3300	ev_loop (EV_A_ 0);	4377	ev_run (EV_A_ 0);
3301		4378
3302	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,	4379	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
3303	which is often provided by the following macro.	4380	which is often provided by the following macro.
3304		4381
3305	=item C<EV_P>, C<EV_P_>	4382	=item C<EV_P>, C<EV_P_>
…		…
3318	suitable for use with C<EV_A>.	4395	suitable for use with C<EV_A>.
3319		4396
3320	=item C<EV_DEFAULT>, C<EV_DEFAULT_>	4397	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
3321		4398
3322	Similar to the other two macros, this gives you the value of the default	4399	Similar to the other two macros, this gives you the value of the default
3323	loop, if multiple loops are supported ("ev loop default").	4400	loop, if multiple loops are supported ("ev loop default"). The default loop
		4401	will be initialised if it isn't already initialised.
		4402
		4403	For non-multiplicity builds, these macros do nothing, so you always have
		4404	to initialise the loop somewhere.
3324		4405
3325	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>	4406	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
3326		4407
3327	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the	4408	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
3328	default loop has been initialised (C<UC> == unchecked). Their behaviour	4409	default loop has been initialised (C<UC> == unchecked). Their behaviour
…		…
3345	}	4426	}
3346		4427
3347	ev_check check;	4428	ev_check check;
3348	ev_check_init (&check, check_cb);	4429	ev_check_init (&check, check_cb);
3349	ev_check_start (EV_DEFAULT_ &check);	4430	ev_check_start (EV_DEFAULT_ &check);
3350	ev_loop (EV_DEFAULT_ 0);	4431	ev_run (EV_DEFAULT_ 0);
3351		4432
3352	=head1 EMBEDDING	4433	=head1 EMBEDDING
3353		4434
3354	Libev can (and often is) directly embedded into host	4435	Libev can (and often is) directly embedded into host
3355	applications. Examples of applications that embed it include the Deliantra	4436	applications. Examples of applications that embed it include the Deliantra
…		…
3395	ev_vars.h	4476	ev_vars.h
3396	ev_wrap.h	4477	ev_wrap.h
3397		4478
3398	ev_win32.c required on win32 platforms only	4479	ev_win32.c required on win32 platforms only
3399		4480
3400	ev_select.c only when select backend is enabled (which is enabled by default)	4481	ev_select.c only when select backend is enabled
3401	ev_poll.c only when poll backend is enabled (disabled by default)	4482	ev_poll.c only when poll backend is enabled
3402	ev_epoll.c only when the epoll backend is enabled (disabled by default)	4483	ev_epoll.c only when the epoll backend is enabled
		4484	ev_linuxaio.c only when the linux aio backend is enabled
3403	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)	4485	ev_kqueue.c only when the kqueue backend is enabled
3404	ev_port.c only when the solaris port backend is enabled (disabled by default)	4486	ev_port.c only when the solaris port backend is enabled
3405		4487
3406	F<ev.c> includes the backend files directly when enabled, so you only need	4488	F<ev.c> includes the backend files directly when enabled, so you only need
3407	to compile this single file.	4489	to compile this single file.
3408		4490
3409	=head3 LIBEVENT COMPATIBILITY API	4491	=head3 LIBEVENT COMPATIBILITY API
…		…
3435	libev.m4	4517	libev.m4
3436		4518
3437	=head2 PREPROCESSOR SYMBOLS/MACROS	4519	=head2 PREPROCESSOR SYMBOLS/MACROS
3438		4520
3439	Libev can be configured via a variety of preprocessor symbols you have to	4521	Libev can be configured via a variety of preprocessor symbols you have to
3440	define before including any of its files. The default in the absence of	4522	define before including (or compiling) any of its files. The default in
3441	autoconf is documented for every option.	4523	the absence of autoconf is documented for every option.
		4524
		4525	Symbols marked with "(h)" do not change the ABI, and can have different
		4526	values when compiling libev vs. including F<ev.h>, so it is permissible
		4527	to redefine them before including F<ev.h> without breaking compatibility
		4528	to a compiled library. All other symbols change the ABI, which means all
		4529	users of libev and the libev code itself must be compiled with compatible
		4530	settings.
3442		4531
3443	=over 4	4532	=over 4
3444		4533
		4534	=item EV_COMPAT3 (h)
		4535
		4536	Backwards compatibility is a major concern for libev. This is why this
		4537	release of libev comes with wrappers for the functions and symbols that
		4538	have been renamed between libev version 3 and 4.
		4539
		4540	You can disable these wrappers (to test compatibility with future
		4541	versions) by defining C<EV_COMPAT3> to C<0> when compiling your
		4542	sources. This has the additional advantage that you can drop the C<struct>
		4543	from C<struct ev_loop> declarations, as libev will provide an C<ev_loop>
		4544	typedef in that case.
		4545
		4546	In some future version, the default for C<EV_COMPAT3> will become C<0>,
		4547	and in some even more future version the compatibility code will be
		4548	removed completely.
		4549
3445	=item EV_STANDALONE	4550	=item EV_STANDALONE (h)
3446		4551
3447	Must always be C<1> if you do not use autoconf configuration, which	4552	Must always be C<1> if you do not use autoconf configuration, which
3448	keeps libev from including F<config.h>, and it also defines dummy	4553	keeps libev from including F<config.h>, and it also defines dummy
3449	implementations for some libevent functions (such as logging, which is not	4554	implementations for some libevent functions (such as logging, which is not
3450	supported). It will also not define any of the structs usually found in	4555	supported). It will also not define any of the structs usually found in
3451	F<event.h> that are not directly supported by the libev core alone.	4556	F<event.h> that are not directly supported by the libev core alone.
3452		4557
3453	In stanbdalone mode, libev will still try to automatically deduce the	4558	In standalone mode, libev will still try to automatically deduce the
3454	configuration, but has to be more conservative.	4559	configuration, but has to be more conservative.
		4560
		4561	=item EV_USE_FLOOR
		4562
		4563	If defined to be C<1>, libev will use the C<floor ()> function for its
		4564	periodic reschedule calculations, otherwise libev will fall back on a
		4565	portable (slower) implementation. If you enable this, you usually have to
		4566	link against libm or something equivalent. Enabling this when the C<floor>
		4567	function is not available will fail, so the safe default is to not enable
		4568	this.
3455		4569
3456	=item EV_USE_MONOTONIC	4570	=item EV_USE_MONOTONIC
3457		4571
3458	If defined to be C<1>, libev will try to detect the availability of the	4572	If defined to be C<1>, libev will try to detect the availability of the
3459	monotonic clock option at both compile time and runtime. Otherwise no	4573	monotonic clock option at both compile time and runtime. Otherwise no
…		…
3523	be used is the winsock select). This means that it will call	4637	be used is the winsock select). This means that it will call
3524	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	4638	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
3525	it is assumed that all these functions actually work on fds, even	4639	it is assumed that all these functions actually work on fds, even
3526	on win32. Should not be defined on non-win32 platforms.	4640	on win32. Should not be defined on non-win32 platforms.
3527		4641
3528	=item EV_FD_TO_WIN32_HANDLE	4642	=item EV_FD_TO_WIN32_HANDLE(fd)
3529		4643
3530	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map	4644	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
3531	file descriptors to socket handles. When not defining this symbol (the	4645	file descriptors to socket handles. When not defining this symbol (the
3532	default), then libev will call C<_get_osfhandle>, which is usually	4646	default), then libev will call C<_get_osfhandle>, which is usually
3533	correct. In some cases, programs use their own file descriptor management,	4647	correct. In some cases, programs use their own file descriptor management,
3534	in which case they can provide this function to map fds to socket handles.	4648	in which case they can provide this function to map fds to socket handles.
3535		4649
		4650	=item EV_WIN32_HANDLE_TO_FD(handle)
		4651
		4652	If C<EV_SELECT_IS_WINSOCKET> then libev maps handles to file descriptors
		4653	using the standard C<_open_osfhandle> function. For programs implementing
		4654	their own fd to handle mapping, overwriting this function makes it easier
		4655	to do so. This can be done by defining this macro to an appropriate value.
		4656
		4657	=item EV_WIN32_CLOSE_FD(fd)
		4658
		4659	If programs implement their own fd to handle mapping on win32, then this
		4660	macro can be used to override the C<close> function, useful to unregister
		4661	file descriptors again. Note that the replacement function has to close
		4662	the underlying OS handle.
		4663
		4664	=item EV_USE_WSASOCKET
		4665
		4666	If defined to be C<1>, libev will use C<WSASocket> to create its internal
		4667	communication socket, which works better in some environments. Otherwise,
		4668	the normal C<socket> function will be used, which works better in other
		4669	environments.
		4670
3536	=item EV_USE_POLL	4671	=item EV_USE_POLL
3537		4672
3538	If defined to be C<1>, libev will compile in support for the C<poll>(2)	4673	If defined to be C<1>, libev will compile in support for the C<poll>(2)
3539	backend. Otherwise it will be enabled on non-win32 platforms. It	4674	backend. Otherwise it will be enabled on non-win32 platforms. It
3540	takes precedence over select.	4675	takes precedence over select.
…		…
3544	If defined to be C<1>, libev will compile in support for the Linux	4679	If defined to be C<1>, libev will compile in support for the Linux
3545	C<epoll>(7) backend. Its availability will be detected at runtime,	4680	C<epoll>(7) backend. Its availability will be detected at runtime,
3546	otherwise another method will be used as fallback. This is the preferred	4681	otherwise another method will be used as fallback. This is the preferred
3547	backend for GNU/Linux systems. If undefined, it will be enabled if the	4682	backend for GNU/Linux systems. If undefined, it will be enabled if the
3548	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.	4683	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
		4684
		4685	=item EV_USE_LINUXAIO
		4686
		4687	If defined to be C<1>, libev will compile in support for the Linux
		4688	aio backend. Due to it's currenbt limitations it has to be requested
		4689	explicitly. If undefined, it will be enabled on linux, otherwise
		4690	disabled.
3549		4691
3550	=item EV_USE_KQUEUE	4692	=item EV_USE_KQUEUE
3551		4693
3552	If defined to be C<1>, libev will compile in support for the BSD style	4694	If defined to be C<1>, libev will compile in support for the BSD style
3553	C<kqueue>(2) backend. Its actual availability will be detected at runtime,	4695	C<kqueue>(2) backend. Its actual availability will be detected at runtime,
…		…
3575	If defined to be C<1>, libev will compile in support for the Linux inotify	4717	If defined to be C<1>, libev will compile in support for the Linux inotify
3576	interface to speed up C<ev_stat> watchers. Its actual availability will	4718	interface to speed up C<ev_stat> watchers. Its actual availability will
3577	be detected at runtime. If undefined, it will be enabled if the headers	4719	be detected at runtime. If undefined, it will be enabled if the headers
3578	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.	4720	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
3579		4721
		4722	=item EV_NO_SMP
		4723
		4724	If defined to be C<1>, libev will assume that memory is always coherent
		4725	between threads, that is, threads can be used, but threads never run on
		4726	different cpus (or different cpu cores). This reduces dependencies
		4727	and makes libev faster.
		4728
		4729	=item EV_NO_THREADS
		4730
		4731	If defined to be C<1>, libev will assume that it will never be called from
		4732	different threads (that includes signal handlers), which is a stronger
		4733	assumption than C<EV_NO_SMP>, above. This reduces dependencies and makes
		4734	libev faster.
		4735
3580	=item EV_ATOMIC_T	4736	=item EV_ATOMIC_T
3581		4737
3582	Libev requires an integer type (suitable for storing C<0> or C<1>) whose	4738	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
3583	access is atomic with respect to other threads or signal contexts. No such	4739	access is atomic with respect to other threads or signal contexts. No
3584	type is easily found in the C language, so you can provide your own type	4740	such type is easily found in the C language, so you can provide your own
3585	that you know is safe for your purposes. It is used both for signal handler "locking"	4741	type that you know is safe for your purposes. It is used both for signal
3586	as well as for signal and thread safety in C<ev_async> watchers.	4742	handler "locking" as well as for signal and thread safety in C<ev_async>
		4743	watchers.
3587		4744
3588	In the absence of this define, libev will use C<sig_atomic_t volatile>	4745	In the absence of this define, libev will use C<sig_atomic_t volatile>
3589	(from F<signal.h>), which is usually good enough on most platforms.	4746	(from F<signal.h>), which is usually good enough on most platforms.
3590		4747
3591	=item EV_H	4748	=item EV_H (h)
3592		4749
3593	The name of the F<ev.h> header file used to include it. The default if	4750	The name of the F<ev.h> header file used to include it. The default if
3594	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be	4751	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
3595	used to virtually rename the F<ev.h> header file in case of conflicts.	4752	used to virtually rename the F<ev.h> header file in case of conflicts.
3596		4753
3597	=item EV_CONFIG_H	4754	=item EV_CONFIG_H (h)
3598		4755
3599	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	4756	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
3600	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	4757	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
3601	C<EV_H>, above.	4758	C<EV_H>, above.
3602		4759
3603	=item EV_EVENT_H	4760	=item EV_EVENT_H (h)
3604		4761
3605	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	4762	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
3606	of how the F<event.h> header can be found, the default is C<"event.h">.	4763	of how the F<event.h> header can be found, the default is C<"event.h">.
3607		4764
3608	=item EV_PROTOTYPES	4765	=item EV_PROTOTYPES (h)
3609		4766
3610	If defined to be C<0>, then F<ev.h> will not define any function	4767	If defined to be C<0>, then F<ev.h> will not define any function
3611	prototypes, but still define all the structs and other symbols. This is	4768	prototypes, but still define all the structs and other symbols. This is
3612	occasionally useful if you want to provide your own wrapper functions	4769	occasionally useful if you want to provide your own wrapper functions
3613	around libev functions.	4770	around libev functions.
…		…
3618	will have the C<struct ev_loop *> as first argument, and you can create	4775	will have the C<struct ev_loop *> as first argument, and you can create
3619	additional independent event loops. Otherwise there will be no support	4776	additional independent event loops. Otherwise there will be no support
3620	for multiple event loops and there is no first event loop pointer	4777	for multiple event loops and there is no first event loop pointer
3621	argument. Instead, all functions act on the single default loop.	4778	argument. Instead, all functions act on the single default loop.
3622		4779
		4780	Note that C<EV_DEFAULT> and C<EV_DEFAULT_> will no longer provide a
		4781	default loop when multiplicity is switched off - you always have to
		4782	initialise the loop manually in this case.
		4783
3623	=item EV_MINPRI	4784	=item EV_MINPRI
3624		4785
3625	=item EV_MAXPRI	4786	=item EV_MAXPRI
3626		4787
3627	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to	4788	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to
…		…
3635	fine.	4796	fine.
3636		4797
3637	If your embedding application does not need any priorities, defining these	4798	If your embedding application does not need any priorities, defining these
3638	both to C<0> will save some memory and CPU.	4799	both to C<0> will save some memory and CPU.
3639		4800
3640	=item EV_PERIODIC_ENABLE	4801	=item EV_PERIODIC_ENABLE, EV_IDLE_ENABLE, EV_EMBED_ENABLE, EV_STAT_ENABLE,
		4802	EV_PREPARE_ENABLE, EV_CHECK_ENABLE, EV_FORK_ENABLE, EV_SIGNAL_ENABLE,
		4803	EV_ASYNC_ENABLE, EV_CHILD_ENABLE.
3641		4804
3642	If undefined or defined to be C<1>, then periodic timers are supported. If	4805	If undefined or defined to be C<1> (and the platform supports it), then
3643	defined to be C<0>, then they are not. Disabling them saves a few kB of	4806	the respective watcher type is supported. If defined to be C<0>, then it
3644	code.	4807	is not. Disabling watcher types mainly saves code size.
3645		4808
3646	=item EV_IDLE_ENABLE	4809	=item EV_FEATURES
3647
3648	If undefined or defined to be C<1>, then idle watchers are supported. If
3649	defined to be C<0>, then they are not. Disabling them saves a few kB of
3650	code.
3651
3652	=item EV_EMBED_ENABLE
3653
3654	If undefined or defined to be C<1>, then embed watchers are supported. If
3655	defined to be C<0>, then they are not. Embed watchers rely on most other
3656	watcher types, which therefore must not be disabled.
3657
3658	=item EV_STAT_ENABLE
3659
3660	If undefined or defined to be C<1>, then stat watchers are supported. If
3661	defined to be C<0>, then they are not.
3662
3663	=item EV_FORK_ENABLE
3664
3665	If undefined or defined to be C<1>, then fork watchers are supported. If
3666	defined to be C<0>, then they are not.
3667
3668	=item EV_ASYNC_ENABLE
3669
3670	If undefined or defined to be C<1>, then async watchers are supported. If
3671	defined to be C<0>, then they are not.
3672
3673	=item EV_MINIMAL
3674		4810
3675	If you need to shave off some kilobytes of code at the expense of some	4811	If you need to shave off some kilobytes of code at the expense of some
3676	speed, define this symbol to C<1>. Currently this is used to override some	4812	speed (but with the full API), you can define this symbol to request
3677	inlining decisions, saves roughly 30% code size on amd64. It also selects a	4813	certain subsets of functionality. The default is to enable all features
3678	much smaller 2-heap for timer management over the default 4-heap.	4814	that can be enabled on the platform.
		4815
		4816	A typical way to use this symbol is to define it to C<0> (or to a bitset
		4817	with some broad features you want) and then selectively re-enable
		4818	additional parts you want, for example if you want everything minimal,
		4819	but multiple event loop support, async and child watchers and the poll
		4820	backend, use this:
		4821
		4822	#define EV_FEATURES 0
		4823	#define EV_MULTIPLICITY 1
		4824	#define EV_USE_POLL 1
		4825	#define EV_CHILD_ENABLE 1
		4826	#define EV_ASYNC_ENABLE 1
		4827
		4828	The actual value is a bitset, it can be a combination of the following
		4829	values (by default, all of these are enabled):
		4830
		4831	=over 4
		4832
		4833	=item C<1> - faster/larger code
		4834
		4835	Use larger code to speed up some operations.
		4836
		4837	Currently this is used to override some inlining decisions (enlarging the
		4838	code size by roughly 30% on amd64).
		4839
		4840	When optimising for size, use of compiler flags such as C<-Os> with
		4841	gcc is recommended, as well as C<-DNDEBUG>, as libev contains a number of
		4842	assertions.
		4843
		4844	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4845	(e.g. gcc with C<-Os>).
		4846
		4847	=item C<2> - faster/larger data structures
		4848
		4849	Replaces the small 2-heap for timer management by a faster 4-heap, larger
		4850	hash table sizes and so on. This will usually further increase code size
		4851	and can additionally have an effect on the size of data structures at
		4852	runtime.
		4853
		4854	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4855	(e.g. gcc with C<-Os>).
		4856
		4857	=item C<4> - full API configuration
		4858
		4859	This enables priorities (sets C<EV_MAXPRI>=2 and C<EV_MINPRI>=-2), and
		4860	enables multiplicity (C<EV_MULTIPLICITY>=1).
		4861
		4862	=item C<8> - full API
		4863
		4864	This enables a lot of the "lesser used" API functions. See C<ev.h> for
		4865	details on which parts of the API are still available without this
		4866	feature, and do not complain if this subset changes over time.
		4867
		4868	=item C<16> - enable all optional watcher types
		4869
		4870	Enables all optional watcher types. If you want to selectively enable
		4871	only some watcher types other than I/O and timers (e.g. prepare,
		4872	embed, async, child...) you can enable them manually by defining
		4873	C<EV_watchertype_ENABLE> to C<1> instead.
		4874
		4875	=item C<32> - enable all backends
		4876
		4877	This enables all backends - without this feature, you need to enable at
		4878	least one backend manually (C<EV_USE_SELECT> is a good choice).
		4879
		4880	=item C<64> - enable OS-specific "helper" APIs
		4881
		4882	Enable inotify, eventfd, signalfd and similar OS-specific helper APIs by
		4883	default.
		4884
		4885	=back
		4886
		4887	Compiling with C<gcc -Os -DEV_STANDALONE -DEV_USE_EPOLL=1 -DEV_FEATURES=0>
		4888	reduces the compiled size of libev from 24.7Kb code/2.8Kb data to 6.5Kb
		4889	code/0.3Kb data on my GNU/Linux amd64 system, while still giving you I/O
		4890	watchers, timers and monotonic clock support.
		4891
		4892	With an intelligent-enough linker (gcc+binutils are intelligent enough
		4893	when you use C<-Wl,--gc-sections -ffunction-sections>) functions unused by
		4894	your program might be left out as well - a binary starting a timer and an
		4895	I/O watcher then might come out at only 5Kb.
		4896
		4897	=item EV_API_STATIC
		4898
		4899	If this symbol is defined (by default it is not), then all identifiers
		4900	will have static linkage. This means that libev will not export any
		4901	identifiers, and you cannot link against libev anymore. This can be useful
		4902	when you embed libev, only want to use libev functions in a single file,
		4903	and do not want its identifiers to be visible.
		4904
		4905	To use this, define C<EV_API_STATIC> and include F<ev.c> in the file that
		4906	wants to use libev.
		4907
		4908	This option only works when libev is compiled with a C compiler, as C++
		4909	doesn't support the required declaration syntax.
		4910
		4911	=item EV_AVOID_STDIO
		4912
		4913	If this is set to C<1> at compiletime, then libev will avoid using stdio
		4914	functions (printf, scanf, perror etc.). This will increase the code size
		4915	somewhat, but if your program doesn't otherwise depend on stdio and your
		4916	libc allows it, this avoids linking in the stdio library which is quite
		4917	big.
		4918
		4919	Note that error messages might become less precise when this option is
		4920	enabled.
		4921
		4922	=item EV_NSIG
		4923
		4924	The highest supported signal number, +1 (or, the number of
		4925	signals): Normally, libev tries to deduce the maximum number of signals
		4926	automatically, but sometimes this fails, in which case it can be
		4927	specified. Also, using a lower number than detected (C<32> should be
		4928	good for about any system in existence) can save some memory, as libev
		4929	statically allocates some 12-24 bytes per signal number.
3679		4930
3680	=item EV_PID_HASHSIZE	4931	=item EV_PID_HASHSIZE
3681		4932
3682	C<ev_child> watchers use a small hash table to distribute workload by	4933	C<ev_child> watchers use a small hash table to distribute workload by
3683	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	4934	pid. The default size is C<16> (or C<1> with C<EV_FEATURES> disabled),
3684	than enough. If you need to manage thousands of children you might want to	4935	usually more than enough. If you need to manage thousands of children you
3685	increase this value (I<must> be a power of two).	4936	might want to increase this value (I<must> be a power of two).
3686		4937
3687	=item EV_INOTIFY_HASHSIZE	4938	=item EV_INOTIFY_HASHSIZE
3688		4939
3689	C<ev_stat> watchers use a small hash table to distribute workload by	4940	C<ev_stat> watchers use a small hash table to distribute workload by
3690	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	4941	inotify watch id. The default size is C<16> (or C<1> with C<EV_FEATURES>
3691	usually more than enough. If you need to manage thousands of C<ev_stat>	4942	disabled), usually more than enough. If you need to manage thousands of
3692	watchers you might want to increase this value (I<must> be a power of	4943	C<ev_stat> watchers you might want to increase this value (I<must> be a
3693	two).	4944	power of two).
3694		4945
3695	=item EV_USE_4HEAP	4946	=item EV_USE_4HEAP
3696		4947
3697	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4948	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3698	timer and periodics heaps, libev uses a 4-heap when this symbol is defined	4949	timer and periodics heaps, libev uses a 4-heap when this symbol is defined
3699	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably	4950	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably
3700	faster performance with many (thousands) of watchers.	4951	faster performance with many (thousands) of watchers.
3701		4952
3702	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4953	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3703	(disabled).	4954	will be C<0>.
3704		4955
3705	=item EV_HEAP_CACHE_AT	4956	=item EV_HEAP_CACHE_AT
3706		4957
3707	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4958	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3708	timer and periodics heaps, libev can cache the timestamp (I<at>) within	4959	timer and periodics heaps, libev can cache the timestamp (I<at>) within
3709	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),	4960	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
3710	which uses 8-12 bytes more per watcher and a few hundred bytes more code,	4961	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
3711	but avoids random read accesses on heap changes. This improves performance	4962	but avoids random read accesses on heap changes. This improves performance
3712	noticeably with many (hundreds) of watchers.	4963	noticeably with many (hundreds) of watchers.
3713		4964
3714	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4965	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3715	(disabled).	4966	will be C<0>.
3716		4967
3717	=item EV_VERIFY	4968	=item EV_VERIFY
3718		4969
3719	Controls how much internal verification (see C<ev_loop_verify ()>) will	4970	Controls how much internal verification (see C<ev_verify ()>) will
3720	be done: If set to C<0>, no internal verification code will be compiled	4971	be done: If set to C<0>, no internal verification code will be compiled
3721	in. If set to C<1>, then verification code will be compiled in, but not	4972	in. If set to C<1>, then verification code will be compiled in, but not
3722	called. If set to C<2>, then the internal verification code will be	4973	called. If set to C<2>, then the internal verification code will be
3723	called once per loop, which can slow down libev. If set to C<3>, then the	4974	called once per loop, which can slow down libev. If set to C<3>, then the
3724	verification code will be called very frequently, which will slow down	4975	verification code will be called very frequently, which will slow down
3725	libev considerably.	4976	libev considerably.
3726		4977
3727	The default is C<1>, unless C<EV_MINIMAL> is set, in which case it will be	4978	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3728	C<0>.	4979	will be C<0>.
3729		4980
3730	=item EV_COMMON	4981	=item EV_COMMON
3731		4982
3732	By default, all watchers have a C<void *data> member. By redefining	4983	By default, all watchers have a C<void *data> member. By redefining
3733	this macro to a something else you can include more and other types of	4984	this macro to something else you can include more and other types of
3734	members. You have to define it each time you include one of the files,	4985	members. You have to define it each time you include one of the files,
3735	though, and it must be identical each time.	4986	though, and it must be identical each time.
3736		4987
3737	For example, the perl EV module uses something like this:	4988	For example, the perl EV module uses something like this:
3738		4989
…		…
3791	file.	5042	file.
3792		5043
3793	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	5044	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
3794	that everybody includes and which overrides some configure choices:	5045	that everybody includes and which overrides some configure choices:
3795		5046
3796	#define EV_MINIMAL 1	5047	#define EV_FEATURES 8
3797	#define EV_USE_POLL 0	5048	#define EV_USE_SELECT 1
3798	#define EV_MULTIPLICITY 0
3799	#define EV_PERIODIC_ENABLE 0	5049	#define EV_PREPARE_ENABLE 1
		5050	#define EV_IDLE_ENABLE 1
3800	#define EV_STAT_ENABLE 0	5051	#define EV_SIGNAL_ENABLE 1
3801	#define EV_FORK_ENABLE 0	5052	#define EV_CHILD_ENABLE 1
		5053	#define EV_USE_STDEXCEPT 0
3802	#define EV_CONFIG_H <config.h>	5054	#define EV_CONFIG_H <config.h>
3803	#define EV_MINPRI 0
3804	#define EV_MAXPRI 0
3805		5055
3806	#include "ev++.h"	5056	#include "ev++.h"
3807		5057
3808	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	5058	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
3809		5059
3810	#include "ev_cpp.h"	5060	#include "ev_cpp.h"
3811	#include "ev.c"	5061	#include "ev.c"
3812		5062
3813	=head1 INTERACTION WITH OTHER PROGRAMS OR LIBRARIES	5063	=head1 INTERACTION WITH OTHER PROGRAMS, LIBRARIES OR THE ENVIRONMENT
3814		5064
3815	=head2 THREADS AND COROUTINES	5065	=head2 THREADS AND COROUTINES
3816		5066
3817	=head3 THREADS	5067	=head3 THREADS
3818		5068
…		…
3869	default loop and triggering an C<ev_async> watcher from the default loop	5119	default loop and triggering an C<ev_async> watcher from the default loop
3870	watcher callback into the event loop interested in the signal.	5120	watcher callback into the event loop interested in the signal.
3871		5121
3872	=back	5122	=back
3873		5123
		5124	See also L</THREAD LOCKING EXAMPLE>.
		5125
3874	=head3 COROUTINES	5126	=head3 COROUTINES
3875		5127
3876	Libev is very accommodating to coroutines ("cooperative threads"):	5128	Libev is very accommodating to coroutines ("cooperative threads"):
3877	libev fully supports nesting calls to its functions from different	5129	libev fully supports nesting calls to its functions from different
3878	coroutines (e.g. you can call C<ev_loop> on the same loop from two	5130	coroutines (e.g. you can call C<ev_run> on the same loop from two
3879	different coroutines, and switch freely between both coroutines running the	5131	different coroutines, and switch freely between both coroutines running
3880	loop, as long as you don't confuse yourself). The only exception is that	5132	the loop, as long as you don't confuse yourself). The only exception is
3881	you must not do this from C<ev_periodic> reschedule callbacks.	5133	that you must not do this from C<ev_periodic> reschedule callbacks.
3882		5134
3883	Care has been taken to ensure that libev does not keep local state inside	5135	Care has been taken to ensure that libev does not keep local state inside
3884	C<ev_loop>, and other calls do not usually allow for coroutine switches as	5136	C<ev_run>, and other calls do not usually allow for coroutine switches as
3885	they do not call any callbacks.	5137	they do not call any callbacks.
3886		5138
3887	=head2 COMPILER WARNINGS	5139	=head2 COMPILER WARNINGS
3888		5140
3889	Depending on your compiler and compiler settings, you might get no or a	5141	Depending on your compiler and compiler settings, you might get no or a
…		…
3900	maintainable.	5152	maintainable.
3901		5153
3902	And of course, some compiler warnings are just plain stupid, or simply	5154	And of course, some compiler warnings are just plain stupid, or simply
3903	wrong (because they don't actually warn about the condition their message	5155	wrong (because they don't actually warn about the condition their message
3904	seems to warn about). For example, certain older gcc versions had some	5156	seems to warn about). For example, certain older gcc versions had some
3905	warnings that resulted an extreme number of false positives. These have	5157	warnings that resulted in an extreme number of false positives. These have
3906	been fixed, but some people still insist on making code warn-free with	5158	been fixed, but some people still insist on making code warn-free with
3907	such buggy versions.	5159	such buggy versions.
3908		5160
3909	While libev is written to generate as few warnings as possible,	5161	While libev is written to generate as few warnings as possible,
3910	"warn-free" code is not a goal, and it is recommended not to build libev	5162	"warn-free" code is not a goal, and it is recommended not to build libev
…		…
3946	I suggest using suppression lists.	5198	I suggest using suppression lists.
3947		5199
3948		5200
3949	=head1 PORTABILITY NOTES	5201	=head1 PORTABILITY NOTES
3950		5202
		5203	=head2 GNU/LINUX 32 BIT LIMITATIONS
		5204
		5205	GNU/Linux is the only common platform that supports 64 bit file/large file
		5206	interfaces but I<disables> them by default.
		5207
		5208	That means that libev compiled in the default environment doesn't support
		5209	files larger than 2GiB or so, which mainly affects C<ev_stat> watchers.
		5210
		5211	Unfortunately, many programs try to work around this GNU/Linux issue
		5212	by enabling the large file API, which makes them incompatible with the
		5213	standard libev compiled for their system.
		5214
		5215	Likewise, libev cannot enable the large file API itself as this would
		5216	suddenly make it incompatible to the default compile time environment,
		5217	i.e. all programs not using special compile switches.
		5218
		5219	=head2 OS/X AND DARWIN BUGS
		5220
		5221	The whole thing is a bug if you ask me - basically any system interface
		5222	you touch is broken, whether it is locales, poll, kqueue or even the
		5223	OpenGL drivers.
		5224
		5225	=head3 C<kqueue> is buggy
		5226
		5227	The kqueue syscall is broken in all known versions - most versions support
		5228	only sockets, many support pipes.
		5229
		5230	Libev tries to work around this by not using C<kqueue> by default on this
		5231	rotten platform, but of course you can still ask for it when creating a
		5232	loop - embedding a socket-only kqueue loop into a select-based one is
		5233	probably going to work well.
		5234
		5235	=head3 C<poll> is buggy
		5236
		5237	Instead of fixing C<kqueue>, Apple replaced their (working) C<poll>
		5238	implementation by something calling C<kqueue> internally around the 10.5.6
		5239	release, so now C<kqueue> I<and> C<poll> are broken.
		5240
		5241	Libev tries to work around this by not using C<poll> by default on
		5242	this rotten platform, but of course you can still ask for it when creating
		5243	a loop.
		5244
		5245	=head3 C<select> is buggy
		5246
		5247	All that's left is C<select>, and of course Apple found a way to fuck this
		5248	one up as well: On OS/X, C<select> actively limits the number of file
		5249	descriptors you can pass in to 1024 - your program suddenly crashes when
		5250	you use more.
		5251
		5252	There is an undocumented "workaround" for this - defining
		5253	C<_DARWIN_UNLIMITED_SELECT>, which libev tries to use, so select I<should>
		5254	work on OS/X.
		5255
		5256	=head2 SOLARIS PROBLEMS AND WORKAROUNDS
		5257
		5258	=head3 C<errno> reentrancy
		5259
		5260	The default compile environment on Solaris is unfortunately so
		5261	thread-unsafe that you can't even use components/libraries compiled
		5262	without C<-D_REENTRANT> in a threaded program, which, of course, isn't
		5263	defined by default. A valid, if stupid, implementation choice.
		5264
		5265	If you want to use libev in threaded environments you have to make sure
		5266	it's compiled with C<_REENTRANT> defined.
		5267
		5268	=head3 Event port backend
		5269
		5270	The scalable event interface for Solaris is called "event
		5271	ports". Unfortunately, this mechanism is very buggy in all major
		5272	releases. If you run into high CPU usage, your program freezes or you get
		5273	a large number of spurious wakeups, make sure you have all the relevant
		5274	and latest kernel patches applied. No, I don't know which ones, but there
		5275	are multiple ones to apply, and afterwards, event ports actually work
		5276	great.
		5277
		5278	If you can't get it to work, you can try running the program by setting
		5279	the environment variable C<LIBEV_FLAGS=3> to only allow C<poll> and
		5280	C<select> backends.
		5281
		5282	=head2 AIX POLL BUG
		5283
		5284	AIX unfortunately has a broken C<poll.h> header. Libev works around
		5285	this by trying to avoid the poll backend altogether (i.e. it's not even
		5286	compiled in), which normally isn't a big problem as C<select> works fine
		5287	with large bitsets on AIX, and AIX is dead anyway.
		5288
3951	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS	5289	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
		5290
		5291	=head3 General issues
3952		5292
3953	Win32 doesn't support any of the standards (e.g. POSIX) that libev	5293	Win32 doesn't support any of the standards (e.g. POSIX) that libev
3954	requires, and its I/O model is fundamentally incompatible with the POSIX	5294	requires, and its I/O model is fundamentally incompatible with the POSIX
3955	model. Libev still offers limited functionality on this platform in	5295	model. Libev still offers limited functionality on this platform in
3956	the form of the C<EVBACKEND_SELECT> backend, and only supports socket	5296	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
3957	descriptors. This only applies when using Win32 natively, not when using	5297	descriptors. This only applies when using Win32 natively, not when using
3958	e.g. cygwin.	5298	e.g. cygwin. Actually, it only applies to the microsofts own compilers,
		5299	as every compiler comes with a slightly differently broken/incompatible
		5300	environment.
3959		5301
3960	Lifting these limitations would basically require the full	5302	Lifting these limitations would basically require the full
3961	re-implementation of the I/O system. If you are into these kinds of	5303	re-implementation of the I/O system. If you are into this kind of thing,
3962	things, then note that glib does exactly that for you in a very portable	5304	then note that glib does exactly that for you in a very portable way (note
3963	way (note also that glib is the slowest event library known to man).	5305	also that glib is the slowest event library known to man).
3964		5306
3965	There is no supported compilation method available on windows except	5307	There is no supported compilation method available on windows except
3966	embedding it into other applications.	5308	embedding it into other applications.
3967		5309
3968	Sensible signal handling is officially unsupported by Microsoft - libev	5310	Sensible signal handling is officially unsupported by Microsoft - libev
…		…
3996	you do I<not> compile the F<ev.c> or any other embedded source files!):	5338	you do I<not> compile the F<ev.c> or any other embedded source files!):
3997		5339
3998	#include "evwrap.h"	5340	#include "evwrap.h"
3999	#include "ev.c"	5341	#include "ev.c"
4000		5342
4001	=over 4
4002
4003	=item The winsocket select function	5343	=head3 The winsocket C<select> function
4004		5344
4005	The winsocket C<select> function doesn't follow POSIX in that it	5345	The winsocket C<select> function doesn't follow POSIX in that it
4006	requires socket I<handles> and not socket I<file descriptors> (it is	5346	requires socket I<handles> and not socket I<file descriptors> (it is
4007	also extremely buggy). This makes select very inefficient, and also	5347	also extremely buggy). This makes select very inefficient, and also
4008	requires a mapping from file descriptors to socket handles (the Microsoft	5348	requires a mapping from file descriptors to socket handles (the Microsoft
…		…
4017	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */	5357	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
4018		5358
4019	Note that winsockets handling of fd sets is O(n), so you can easily get a	5359	Note that winsockets handling of fd sets is O(n), so you can easily get a
4020	complexity in the O(n²) range when using win32.	5360	complexity in the O(n²) range when using win32.
4021		5361
4022	=item Limited number of file descriptors	5362	=head3 Limited number of file descriptors
4023		5363
4024	Windows has numerous arbitrary (and low) limits on things.	5364	Windows has numerous arbitrary (and low) limits on things.
4025		5365
4026	Early versions of winsocket's select only supported waiting for a maximum	5366	Early versions of winsocket's select only supported waiting for a maximum
4027	of C<64> handles (probably owning to the fact that all windows kernels	5367	of C<64> handles (probably owning to the fact that all windows kernels
…		…
4042	runtime libraries. This might get you to about C<512> or C<2048> sockets	5382	runtime libraries. This might get you to about C<512> or C<2048> sockets
4043	(depending on windows version and/or the phase of the moon). To get more,	5383	(depending on windows version and/or the phase of the moon). To get more,
4044	you need to wrap all I/O functions and provide your own fd management, but	5384	you need to wrap all I/O functions and provide your own fd management, but
4045	the cost of calling select (O(n²)) will likely make this unworkable.	5385	the cost of calling select (O(n²)) will likely make this unworkable.
4046		5386
4047	=back
4048
4049	=head2 PORTABILITY REQUIREMENTS	5387	=head2 PORTABILITY REQUIREMENTS
4050		5388
4051	In addition to a working ISO-C implementation and of course the	5389	In addition to a working ISO-C implementation and of course the
4052	backend-specific APIs, libev relies on a few additional extensions:	5390	backend-specific APIs, libev relies on a few additional extensions:
4053		5391
…		…
4059	Libev assumes not only that all watcher pointers have the same internal	5397	Libev assumes not only that all watcher pointers have the same internal
4060	structure (guaranteed by POSIX but not by ISO C for example), but it also	5398	structure (guaranteed by POSIX but not by ISO C for example), but it also
4061	assumes that the same (machine) code can be used to call any watcher	5399	assumes that the same (machine) code can be used to call any watcher
4062	callback: The watcher callbacks have different type signatures, but libev	5400	callback: The watcher callbacks have different type signatures, but libev
4063	calls them using an C<ev_watcher *> internally.	5401	calls them using an C<ev_watcher *> internally.
		5402
		5403	=item null pointers and integer zero are represented by 0 bytes
		5404
		5405	Libev uses C<memset> to initialise structs and arrays to C<0> bytes, and
		5406	relies on this setting pointers and integers to null.
		5407
		5408	=item pointer accesses must be thread-atomic
		5409
		5410	Accessing a pointer value must be atomic, it must both be readable and
		5411	writable in one piece - this is the case on all current architectures.
4064		5412
4065	=item C<sig_atomic_t volatile> must be thread-atomic as well	5413	=item C<sig_atomic_t volatile> must be thread-atomic as well
4066		5414
4067	The type C<sig_atomic_t volatile> (or whatever is defined as	5415	The type C<sig_atomic_t volatile> (or whatever is defined as
4068	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different	5416	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different
…		…
4077	thread" or will block signals process-wide, both behaviours would	5425	thread" or will block signals process-wide, both behaviours would
4078	be compatible with libev. Interaction between C<sigprocmask> and	5426	be compatible with libev. Interaction between C<sigprocmask> and
4079	C<pthread_sigmask> could complicate things, however.	5427	C<pthread_sigmask> could complicate things, however.
4080		5428
4081	The most portable way to handle signals is to block signals in all threads	5429	The most portable way to handle signals is to block signals in all threads
4082	except the initial one, and run the default loop in the initial thread as	5430	except the initial one, and run the signal handling loop in the initial
4083	well.	5431	thread as well.
4084		5432
4085	=item C<long> must be large enough for common memory allocation sizes	5433	=item C<long> must be large enough for common memory allocation sizes
4086		5434
4087	To improve portability and simplify its API, libev uses C<long> internally	5435	To improve portability and simplify its API, libev uses C<long> internally
4088	instead of C<size_t> when allocating its data structures. On non-POSIX	5436	instead of C<size_t> when allocating its data structures. On non-POSIX
…		…
4091	watchers.	5439	watchers.
4092		5440
4093	=item C<double> must hold a time value in seconds with enough accuracy	5441	=item C<double> must hold a time value in seconds with enough accuracy
4094		5442
4095	The type C<double> is used to represent timestamps. It is required to	5443	The type C<double> is used to represent timestamps. It is required to
4096	have at least 51 bits of mantissa (and 9 bits of exponent), which is good	5444	have at least 51 bits of mantissa (and 9 bits of exponent), which is
4097	enough for at least into the year 4000. This requirement is fulfilled by	5445	good enough for at least into the year 4000 with millisecond accuracy
		5446	(the design goal for libev). This requirement is overfulfilled by
4098	implementations implementing IEEE 754, which is basically all existing	5447	implementations using IEEE 754, which is basically all existing ones.
		5448
4099	ones. With IEEE 754 doubles, you get microsecond accuracy until at least	5449	With IEEE 754 doubles, you get microsecond accuracy until at least the
4100	2200.	5450	year 2255 (and millisecond accuracy till the year 287396 - by then, libev
		5451	is either obsolete or somebody patched it to use C<long double> or
		5452	something like that, just kidding).
4101		5453
4102	=back	5454	=back
4103		5455
4104	If you know of other additional requirements drop me a note.	5456	If you know of other additional requirements drop me a note.
4105		5457
…		…
4167	=item Processing ev_async_send: O(number_of_async_watchers)	5519	=item Processing ev_async_send: O(number_of_async_watchers)
4168		5520
4169	=item Processing signals: O(max_signal_number)	5521	=item Processing signals: O(max_signal_number)
4170		5522
4171	Sending involves a system call I<iff> there were no other C<ev_async_send>	5523	Sending involves a system call I<iff> there were no other C<ev_async_send>
4172	calls in the current loop iteration. Checking for async and signal events	5524	calls in the current loop iteration and the loop is currently
		5525	blocked. Checking for async and signal events involves iterating over all
4173	involves iterating over all running async watchers or all signal numbers.	5526	running async watchers or all signal numbers.
4174		5527
4175	=back	5528	=back
4176		5529
4177		5530
		5531	=head1 PORTING FROM LIBEV 3.X TO 4.X
		5532
		5533	The major version 4 introduced some incompatible changes to the API.
		5534
		5535	At the moment, the C<ev.h> header file provides compatibility definitions
		5536	for all changes, so most programs should still compile. The compatibility
		5537	layer might be removed in later versions of libev, so better update to the
		5538	new API early than late.
		5539
		5540	=over 4
		5541
		5542	=item C<EV_COMPAT3> backwards compatibility mechanism
		5543
		5544	The backward compatibility mechanism can be controlled by
		5545	C<EV_COMPAT3>. See L</"PREPROCESSOR SYMBOLS/MACROS"> in the L</EMBEDDING>
		5546	section.
		5547
		5548	=item C<ev_default_destroy> and C<ev_default_fork> have been removed
		5549
		5550	These calls can be replaced easily by their C<ev_loop_xxx> counterparts:
		5551
		5552	ev_loop_destroy (EV_DEFAULT_UC);
		5553	ev_loop_fork (EV_DEFAULT);
		5554
		5555	=item function/symbol renames
		5556
		5557	A number of functions and symbols have been renamed:
		5558
		5559	ev_loop => ev_run
		5560	EVLOOP_NONBLOCK => EVRUN_NOWAIT
		5561	EVLOOP_ONESHOT => EVRUN_ONCE
		5562
		5563	ev_unloop => ev_break
		5564	EVUNLOOP_CANCEL => EVBREAK_CANCEL
		5565	EVUNLOOP_ONE => EVBREAK_ONE
		5566	EVUNLOOP_ALL => EVBREAK_ALL
		5567
		5568	EV_TIMEOUT => EV_TIMER
		5569
		5570	ev_loop_count => ev_iteration
		5571	ev_loop_depth => ev_depth
		5572	ev_loop_verify => ev_verify
		5573
		5574	Most functions working on C<struct ev_loop> objects don't have an
		5575	C<ev_loop_> prefix, so it was removed; C<ev_loop>, C<ev_unloop> and
		5576	associated constants have been renamed to not collide with the C<struct
		5577	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme
		5578	as all other watcher types. Note that C<ev_loop_fork> is still called
		5579	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>
		5580	typedef.
		5581
		5582	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>
		5583
		5584	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different
		5585	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile
		5586	and work, but the library code will of course be larger.
		5587
		5588	=back
		5589
		5590
4178	=head1 GLOSSARY	5591	=head1 GLOSSARY
4179		5592
4180	=over 4	5593	=over 4
4181		5594
4182	=item active	5595	=item active
4183		5596
4184	A watcher is active as long as it has been started (has been attached to	5597	A watcher is active as long as it has been started and not yet stopped.
4185	an event loop) but not yet stopped (disassociated from the event loop).	5598	See L</WATCHER STATES> for details.
4186		5599
4187	=item application	5600	=item application
4188		5601
4189	In this document, an application is whatever is using libev.	5602	In this document, an application is whatever is using libev.
		5603
		5604	=item backend
		5605
		5606	The part of the code dealing with the operating system interfaces.
4190		5607
4191	=item callback	5608	=item callback
4192		5609
4193	The address of a function that is called when some event has been	5610	The address of a function that is called when some event has been
4194	detected. Callbacks are being passed the event loop, the watcher that	5611	detected. Callbacks are being passed the event loop, the watcher that
4195	received the event, and the actual event bitset.	5612	received the event, and the actual event bitset.
4196		5613
4197	=item callback invocation	5614	=item callback/watcher invocation
4198		5615
4199	The act of calling the callback associated with a watcher.	5616	The act of calling the callback associated with a watcher.
4200		5617
4201	=item event	5618	=item event
4202		5619
4203	A change of state of some external event, such as data now being available	5620	A change of state of some external event, such as data now being available
4204	for reading on a file descriptor, time having passed or simply not having	5621	for reading on a file descriptor, time having passed or simply not having
4205	any other events happening anymore.	5622	any other events happening anymore.
4206		5623
4207	In libev, events are represented as single bits (such as C<EV_READ> or	5624	In libev, events are represented as single bits (such as C<EV_READ> or
4208	C<EV_TIMEOUT>).	5625	C<EV_TIMER>).
4209		5626
4210	=item event library	5627	=item event library
4211		5628
4212	A software package implementing an event model and loop.	5629	A software package implementing an event model and loop.
4213		5630
…		…
4221	The model used to describe how an event loop handles and processes	5638	The model used to describe how an event loop handles and processes
4222	watchers and events.	5639	watchers and events.
4223		5640
4224	=item pending	5641	=item pending
4225		5642
4226	A watcher is pending as soon as the corresponding event has been detected,	5643	A watcher is pending as soon as the corresponding event has been
4227	and stops being pending as soon as the watcher will be invoked or its	5644	detected. See L</WATCHER STATES> for details.
4228	pending status is explicitly cleared by the application.
4229
4230	A watcher can be pending, but not active. Stopping a watcher also clears
4231	its pending status.
4232		5645
4233	=item real time	5646	=item real time
4234		5647
4235	The physical time that is observed. It is apparently strictly monotonic :)	5648	The physical time that is observed. It is apparently strictly monotonic :)
4236		5649
4237	=item wall-clock time	5650	=item wall-clock time
4238		5651
4239	The time and date as shown on clocks. Unlike real time, it can actually	5652	The time and date as shown on clocks. Unlike real time, it can actually
4240	be wrong and jump forwards and backwards, e.g. when the you adjust your	5653	be wrong and jump forwards and backwards, e.g. when you adjust your
4241	clock.	5654	clock.
4242		5655
4243	=item watcher	5656	=item watcher
4244		5657
4245	A data structure that describes interest in certain events. Watchers need	5658	A data structure that describes interest in certain events. Watchers need
4246	to be started (attached to an event loop) before they can receive events.	5659	to be started (attached to an event loop) before they can receive events.
4247		5660
4248	=item watcher invocation
4249
4250	The act of calling the callback associated with a watcher.
4251
4252	=back	5661	=back
4253		5662
4254	=head1 AUTHOR	5663	=head1 AUTHOR
4255		5664
4256	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael Magnusson.	5665	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael
		5666	Magnusson and Emanuele Giaquinta, and minor corrections by many others.
4257		5667

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines