ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.260 by root, Sun Jul 19 21:18:03 2009 UTC vs.
Revision 1.349 by root, Mon Jan 10 01:58:55 2011 UTC

…		…
26	puts ("stdin ready");	26	puts ("stdin ready");
27	// for one-shot events, one must manually stop the watcher	27	// for one-shot events, one must manually stop the watcher
28	// with its corresponding stop function.	28	// with its corresponding stop function.
29	ev_io_stop (EV_A_ w);	29	ev_io_stop (EV_A_ w);
30		30
31	// this causes all nested ev_loop's to stop iterating	31	// this causes all nested ev_run's to stop iterating
32	ev_unloop (EV_A_ EVUNLOOP_ALL);	32	ev_break (EV_A_ EVBREAK_ALL);
33	}	33	}
34		34
35	// another callback, this time for a time-out	35	// another callback, this time for a time-out
36	static void	36	static void
37	timeout_cb (EV_P_ ev_timer *w, int revents)	37	timeout_cb (EV_P_ ev_timer *w, int revents)
38	{	38	{
39	puts ("timeout");	39	puts ("timeout");
40	// this causes the innermost ev_loop to stop iterating	40	// this causes the innermost ev_run to stop iterating
41	ev_unloop (EV_A_ EVUNLOOP_ONE);	41	ev_break (EV_A_ EVBREAK_ONE);
42	}	42	}
43		43
44	int	44	int
45	main (void)	45	main (void)
46	{	46	{
47	// use the default event loop unless you have special needs	47	// use the default event loop unless you have special needs
48	struct ev_loop *loop = ev_default_loop (0);	48	struct ev_loop *loop = EV_DEFAULT;
49		49
50	// initialise an io watcher, then start it	50	// initialise an io watcher, then start it
51	// this one will watch for stdin to become readable	51	// this one will watch for stdin to become readable
52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
53	ev_io_start (loop, &stdin_watcher);	53	ev_io_start (loop, &stdin_watcher);
…		…
56	// simple non-repeating 5.5 second timeout	56	// simple non-repeating 5.5 second timeout
57	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	57	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
58	ev_timer_start (loop, &timeout_watcher);	58	ev_timer_start (loop, &timeout_watcher);
59		59
60	// now wait for events to arrive	60	// now wait for events to arrive
61	ev_loop (loop, 0);	61	ev_run (loop, 0);
62		62
63	// unloop was called, so exit	63	// unloop was called, so exit
64	return 0;	64	return 0;
65	}	65	}
66		66
…		…
75	While this document tries to be as complete as possible in documenting	75	While this document tries to be as complete as possible in documenting
76	libev, its usage and the rationale behind its design, it is not a tutorial	76	libev, its usage and the rationale behind its design, it is not a tutorial
77	on event-based programming, nor will it introduce event-based programming	77	on event-based programming, nor will it introduce event-based programming
78	with libev.	78	with libev.
79		79
80	Familarity with event based programming techniques in general is assumed	80	Familiarity with event based programming techniques in general is assumed
81	throughout this document.	81	throughout this document.
		82
		83	=head1 WHAT TO READ WHEN IN A HURRY
		84
		85	This manual tries to be very detailed, but unfortunately, this also makes
		86	it very long. If you just want to know the basics of libev, I suggest
		87	reading L<ANATOMY OF A WATCHER>, then the L<EXAMPLE PROGRAM> above and
		88	look up the missing functions in L<GLOBAL FUNCTIONS> and the C<ev_io> and
		89	C<ev_timer> sections in L<WATCHER TYPES>.
82		90
83	=head1 ABOUT LIBEV	91	=head1 ABOUT LIBEV
84		92
85	Libev is an event loop: you register interest in certain events (such as a	93	Libev is an event loop: you register interest in certain events (such as a
86	file descriptor being readable or a timeout occurring), and it will manage	94	file descriptor being readable or a timeout occurring), and it will manage
…		…
98	=head2 FEATURES	106	=head2 FEATURES
99		107
100	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	108	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
101	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	109	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
102	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	110	for file descriptor events (C<ev_io>), the Linux C<inotify> interface
103	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers	111	(for C<ev_stat>), Linux eventfd/signalfd (for faster and cleaner
104	with customised rescheduling (C<ev_periodic>), synchronous signals	112	inter-thread wakeup (C<ev_async>)/signal handling (C<ev_signal>)) relative
105	(C<ev_signal>), process status change events (C<ev_child>), and event	113	timers (C<ev_timer>), absolute timers with customised rescheduling
106	watchers dealing with the event loop mechanism itself (C<ev_idle>,	114	(C<ev_periodic>), synchronous signals (C<ev_signal>), process status
107	C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as	115	change events (C<ev_child>), and event watchers dealing with the event
108	file watchers (C<ev_stat>) and even limited support for fork events	116	loop mechanism itself (C<ev_idle>, C<ev_embed>, C<ev_prepare> and
109	(C<ev_fork>).	117	C<ev_check> watchers) as well as file watchers (C<ev_stat>) and even
		118	limited support for fork events (C<ev_fork>).
110		119
111	It also is quite fast (see this	120	It also is quite fast (see this
112	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent	121	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
113	for example).	122	for example).
114		123
…		…
117	Libev is very configurable. In this manual the default (and most common)	126	Libev is very configurable. In this manual the default (and most common)
118	configuration will be described, which supports multiple event loops. For	127	configuration will be described, which supports multiple event loops. For
119	more info about various configuration options please have a look at	128	more info about various configuration options please have a look at
120	B<EMBED> section in this manual. If libev was configured without support	129	B<EMBED> section in this manual. If libev was configured without support
121	for multiple event loops, then all functions taking an initial argument of	130	for multiple event loops, then all functions taking an initial argument of
122	name C<loop> (which is always of type C<ev_loop *>) will not have	131	name C<loop> (which is always of type C<struct ev_loop *>) will not have
123	this argument.	132	this argument.
124		133
125	=head2 TIME REPRESENTATION	134	=head2 TIME REPRESENTATION
126		135
127	Libev represents time as a single floating point number, representing	136	Libev represents time as a single floating point number, representing
128	the (fractional) number of seconds since the (POSIX) epoch (somewhere	137	the (fractional) number of seconds since the (POSIX) epoch (in practice
129	near the beginning of 1970, details are complicated, don't ask). This	138	somewhere near the beginning of 1970, details are complicated, don't
130	type is called C<ev_tstamp>, which is what you should use too. It usually	139	ask). This type is called C<ev_tstamp>, which is what you should use
131	aliases to the C<double> type in C. When you need to do any calculations	140	too. It usually aliases to the C<double> type in C. When you need to do
132	on it, you should treat it as some floating point value. Unlike the name	141	any calculations on it, you should treat it as some floating point value.
		142
133	component C<stamp> might indicate, it is also used for time differences	143	Unlike the name component C<stamp> might indicate, it is also used for
134	throughout libev.	144	time differences (e.g. delays) throughout libev.
135		145
136	=head1 ERROR HANDLING	146	=head1 ERROR HANDLING
137		147
138	Libev knows three classes of errors: operating system errors, usage errors	148	Libev knows three classes of errors: operating system errors, usage errors
139	and internal errors (bugs).	149	and internal errors (bugs).
…		…
163		173
164	=item ev_tstamp ev_time ()	174	=item ev_tstamp ev_time ()
165		175
166	Returns the current time as libev would use it. Please note that the	176	Returns the current time as libev would use it. Please note that the
167	C<ev_now> function is usually faster and also often returns the timestamp	177	C<ev_now> function is usually faster and also often returns the timestamp
168	you actually want to know.	178	you actually want to know. Also interesting is the combination of
		179	C<ev_update_now> and C<ev_now>.
169		180
170	=item ev_sleep (ev_tstamp interval)	181	=item ev_sleep (ev_tstamp interval)
171		182
172	Sleep for the given interval: The current thread will be blocked until	183	Sleep for the given interval: The current thread will be blocked until
173	either it is interrupted or the given time interval has passed. Basically	184	either it is interrupted or the given time interval has passed. Basically
…		…
190	as this indicates an incompatible change. Minor versions are usually	201	as this indicates an incompatible change. Minor versions are usually
191	compatible to older versions, so a larger minor version alone is usually	202	compatible to older versions, so a larger minor version alone is usually
192	not a problem.	203	not a problem.
193		204
194	Example: Make sure we haven't accidentally been linked against the wrong	205	Example: Make sure we haven't accidentally been linked against the wrong
195	version.	206	version (note, however, that this will not detect other ABI mismatches,
		207	such as LFS or reentrancy).
196		208
197	assert (("libev version mismatch",	209	assert (("libev version mismatch",
198	ev_version_major () == EV_VERSION_MAJOR	210	ev_version_major () == EV_VERSION_MAJOR
199	&& ev_version_minor () >= EV_VERSION_MINOR));	211	&& ev_version_minor () >= EV_VERSION_MINOR));
200		212
…		…
211	assert (("sorry, no epoll, no sex",	223	assert (("sorry, no epoll, no sex",
212	ev_supported_backends () & EVBACKEND_EPOLL));	224	ev_supported_backends () & EVBACKEND_EPOLL));
213		225
214	=item unsigned int ev_recommended_backends ()	226	=item unsigned int ev_recommended_backends ()
215		227
216	Return the set of all backends compiled into this binary of libev and also	228	Return the set of all backends compiled into this binary of libev and
217	recommended for this platform. This set is often smaller than the one	229	also recommended for this platform, meaning it will work for most file
		230	descriptor types. This set is often smaller than the one returned by
218	returned by C<ev_supported_backends>, as for example kqueue is broken on	231	C<ev_supported_backends>, as for example kqueue is broken on most BSDs
219	most BSDs and will not be auto-detected unless you explicitly request it	232	and will not be auto-detected unless you explicitly request it (assuming
220	(assuming you know what you are doing). This is the set of backends that	233	you know what you are doing). This is the set of backends that libev will
221	libev will probe for if you specify no backends explicitly.	234	probe for if you specify no backends explicitly.
222		235
223	=item unsigned int ev_embeddable_backends ()	236	=item unsigned int ev_embeddable_backends ()
224		237
225	Returns the set of backends that are embeddable in other event loops. This	238	Returns the set of backends that are embeddable in other event loops. This
226	is the theoretical, all-platform, value. To find which backends	239	value is platform-specific but can include backends not available on the
227	might be supported on the current system, you would need to look at	240	current system. To find which embeddable backends might be supported on
228	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for	241	the current system, you would need to look at C<ev_embeddable_backends ()
229	recommended ones.	242	& ev_supported_backends ()>, likewise for recommended ones.
230		243
231	See the description of C<ev_embed> watchers for more info.	244	See the description of C<ev_embed> watchers for more info.
232		245
233	=item ev_set_allocator (void *(*cb)(void *ptr, long size)) [NOT REENTRANT]	246	=item ev_set_allocator (void *(*cb)(void *ptr, long size))
234		247
235	Sets the allocation function to use (the prototype is similar - the	248	Sets the allocation function to use (the prototype is similar - the
236	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is	249	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
237	used to allocate and free memory (no surprises here). If it returns zero	250	used to allocate and free memory (no surprises here). If it returns zero
238	when memory needs to be allocated (C<size != 0>), the library might abort	251	when memory needs to be allocated (C<size != 0>), the library might abort
…		…
264	}	277	}
265		278
266	...	279	...
267	ev_set_allocator (persistent_realloc);	280	ev_set_allocator (persistent_realloc);
268		281
269	=item ev_set_syserr_cb (void (*cb)(const char *msg)); [NOT REENTRANT]	282	=item ev_set_syserr_cb (void (*cb)(const char *msg))
270		283
271	Set the callback function to call on a retryable system call error (such	284	Set the callback function to call on a retryable system call error (such
272	as failed select, poll, epoll_wait). The message is a printable string	285	as failed select, poll, epoll_wait). The message is a printable string
273	indicating the system call or subsystem causing the problem. If this	286	indicating the system call or subsystem causing the problem. If this
274	callback is set, then libev will expect it to remedy the situation, no	287	callback is set, then libev will expect it to remedy the situation, no
…		…
286	}	299	}
287		300
288	...	301	...
289	ev_set_syserr_cb (fatal_error);	302	ev_set_syserr_cb (fatal_error);
290		303
		304	=item ev_feed_signal (int signum)
		305
		306	This function can be used to "simulate" a signal receive. It is completely
		307	safe to call this function at any time, from any context, including signal
		308	handlers or random threads.
		309
		310	It's main use is to customise signal handling in your process, especially
		311	in the presence of threads. For example, you could block signals
		312	by default in all threads (and specifying C<EVFLAG_NOSIGMASK> when
		313	creating any loops), and in one thread, use C<sigwait> or any other
		314	mechanism to wait for signals, then "deliver" them to libev by calling
		315	C<ev_feed_signal>.
		316
291	=back	317	=back
292		318
293	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	319	=head1 FUNCTIONS CONTROLLING EVENT LOOPS
294		320
295	An event loop is described by a C<struct ev_loop *> (the C<struct>	321	An event loop is described by a C<struct ev_loop *> (the C<struct> is
296	is I<not> optional in this case, as there is also an C<ev_loop>	322	I<not> optional in this case unless libev 3 compatibility is disabled, as
297	I<function>).	323	libev 3 had an C<ev_loop> function colliding with the struct name).
298		324
299	The library knows two types of such loops, the I<default> loop, which	325	The library knows two types of such loops, the I<default> loop, which
300	supports signals and child events, and dynamically created loops which do	326	supports child process events, and dynamically created event loops which
301	not.	327	do not.
302		328
303	=over 4	329	=over 4
304		330
305	=item struct ev_loop *ev_default_loop (unsigned int flags)	331	=item struct ev_loop *ev_default_loop (unsigned int flags)
306		332
307	This will initialise the default event loop if it hasn't been initialised	333	This returns the "default" event loop object, which is what you should
308	yet and return it. If the default loop could not be initialised, returns	334	normally use when you just need "the event loop". Event loop objects and
309	false. If it already was initialised it simply returns it (and ignores the	335	the C<flags> parameter are described in more detail in the entry for
310	flags. If that is troubling you, check C<ev_backend ()> afterwards).	336	C<ev_loop_new>.
		337
		338	If the default loop is already initialised then this function simply
		339	returns it (and ignores the flags. If that is troubling you, check
		340	C<ev_backend ()> afterwards). Otherwise it will create it with the given
		341	flags, which should almost always be C<0>, unless the caller is also the
		342	one calling C<ev_run> or otherwise qualifies as "the main program".
311		343
312	If you don't know what event loop to use, use the one returned from this	344	If you don't know what event loop to use, use the one returned from this
313	function.	345	function (or via the C<EV_DEFAULT> macro).
314		346
315	Note that this function is I<not> thread-safe, so if you want to use it	347	Note that this function is I<not> thread-safe, so if you want to use it
316	from multiple threads, you have to lock (note also that this is unlikely,	348	from multiple threads, you have to employ some kind of mutex (note also
317	as loops cannot be shared easily between threads anyway).	349	that this case is unlikely, as loops cannot be shared easily between
		350	threads anyway).
318		351
319	The default loop is the only loop that can handle C<ev_signal> and	352	The default loop is the only loop that can handle C<ev_child> watchers,
320	C<ev_child> watchers, and to do this, it always registers a handler	353	and to do this, it always registers a handler for C<SIGCHLD>. If this is
321	for C<SIGCHLD>. If this is a problem for your application you can either	354	a problem for your application you can either create a dynamic loop with
322	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you	355	C<ev_loop_new> which doesn't do that, or you can simply overwrite the
323	can simply overwrite the C<SIGCHLD> signal handler I<after> calling	356	C<SIGCHLD> signal handler I<after> calling C<ev_default_init>.
324	C<ev_default_init>.	357
		358	Example: This is the most typical usage.
		359
		360	if (!ev_default_loop (0))
		361	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		362
		363	Example: Restrict libev to the select and poll backends, and do not allow
		364	environment settings to be taken into account:
		365
		366	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
		367
		368	=item struct ev_loop *ev_loop_new (unsigned int flags)
		369
		370	This will create and initialise a new event loop object. If the loop
		371	could not be initialised, returns false.
		372
		373	This function is thread-safe, and one common way to use libev with
		374	threads is indeed to create one loop per thread, and using the default
		375	loop in the "main" or "initial" thread.
325		376
326	The flags argument can be used to specify special behaviour or specific	377	The flags argument can be used to specify special behaviour or specific
327	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	378	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
328		379
329	The following flags are supported:	380	The following flags are supported:
…		…
344	useful to try out specific backends to test their performance, or to work	395	useful to try out specific backends to test their performance, or to work
345	around bugs.	396	around bugs.
346		397
347	=item C<EVFLAG_FORKCHECK>	398	=item C<EVFLAG_FORKCHECK>
348		399
349	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after	400	Instead of calling C<ev_loop_fork> manually after a fork, you can also
350	a fork, you can also make libev check for a fork in each iteration by	401	make libev check for a fork in each iteration by enabling this flag.
351	enabling this flag.
352		402
353	This works by calling C<getpid ()> on every iteration of the loop,	403	This works by calling C<getpid ()> on every iteration of the loop,
354	and thus this might slow down your event loop if you do a lot of loop	404	and thus this might slow down your event loop if you do a lot of loop
355	iterations and little real work, but is usually not noticeable (on my	405	iterations and little real work, but is usually not noticeable (on my
356	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence	406	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence
…		…
365	environment variable.	415	environment variable.
366		416
367	=item C<EVFLAG_NOINOTIFY>	417	=item C<EVFLAG_NOINOTIFY>
368		418
369	When this flag is specified, then libev will not attempt to use the	419	When this flag is specified, then libev will not attempt to use the
370	I<inotify> API for it's C<ev_stat> watchers. Apart from debugging and	420	I<inotify> API for its C<ev_stat> watchers. Apart from debugging and
371	testing, this flag can be useful to conserve inotify file descriptors, as	421	testing, this flag can be useful to conserve inotify file descriptors, as
372	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.	422	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.
373		423
374	=item C<EVFLAG_NOSIGNALFD>	424	=item C<EVFLAG_SIGNALFD>
375		425
376	When this flag is specified, then libev will not attempt to use the	426	When this flag is specified, then libev will attempt to use the
377	I<signalfd> API for it's C<ev_signal> (and C<ev_child>) watchers. This is	427	I<signalfd> API for its C<ev_signal> (and C<ev_child>) watchers. This API
378	probably only useful to work around any bugs in libev. Consequently, this	428	delivers signals synchronously, which makes it both faster and might make
379	flag might go away once the signalfd functionality is considered stable,	429	it possible to get the queued signal data. It can also simplify signal
380	so it's useful mostly in environment variables and not in program code.	430	handling with threads, as long as you properly block signals in your
		431	threads that are not interested in handling them.
		432
		433	Signalfd will not be used by default as this changes your signal mask, and
		434	there are a lot of shoddy libraries and programs (glib's threadpool for
		435	example) that can't properly initialise their signal masks.
		436
		437	=item C<EVFLAG_NOSIGMASK>
		438
		439	When this flag is specified, then libev will avoid to modify the signal
		440	mask. Specifically, this means you ahve to make sure signals are unblocked
		441	when you want to receive them.
		442
		443	This behaviour is useful when you want to do your own signal handling, or
		444	want to handle signals only in specific threads and want to avoid libev
		445	unblocking the signals.
		446
		447	This flag's behaviour will become the default in future versions of libev.
381		448
382	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	449	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
383		450
384	This is your standard select(2) backend. Not I<completely> standard, as	451	This is your standard select(2) backend. Not I<completely> standard, as
385	libev tries to roll its own fd_set with no limits on the number of fds,	452	libev tries to roll its own fd_set with no limits on the number of fds,
…		…
410	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and	477	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and
411	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.	478	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.
412		479
413	=item C<EVBACKEND_EPOLL> (value 4, Linux)	480	=item C<EVBACKEND_EPOLL> (value 4, Linux)
414		481
		482	Use the linux-specific epoll(7) interface (for both pre- and post-2.6.9
		483	kernels).
		484
415	For few fds, this backend is a bit little slower than poll and select,	485	For few fds, this backend is a bit little slower than poll and select,
416	but it scales phenomenally better. While poll and select usually scale	486	but it scales phenomenally better. While poll and select usually scale
417	like O(total_fds) where n is the total number of fds (or the highest fd),	487	like O(total_fds) where n is the total number of fds (or the highest fd),
418	epoll scales either O(1) or O(active_fds).	488	epoll scales either O(1) or O(active_fds).
419		489
420	The epoll mechanism deserves honorable mention as the most misdesigned	490	The epoll mechanism deserves honorable mention as the most misdesigned
421	of the more advanced event mechanisms: mere annoyances include silently	491	of the more advanced event mechanisms: mere annoyances include silently
422	dropping file descriptors, requiring a system call per change per file	492	dropping file descriptors, requiring a system call per change per file
423	descriptor (and unnecessary guessing of parameters), problems with dup and	493	descriptor (and unnecessary guessing of parameters), problems with dup,
		494	returning before the timeout value, resulting in additional iterations
		495	(and only giving 5ms accuracy while select on the same platform gives
424	so on. The biggest issue is fork races, however - if a program forks then	496	0.1ms) and so on. The biggest issue is fork races, however - if a program
425	I<both> parent and child process have to recreate the epoll set, which can	497	forks then I<both> parent and child process have to recreate the epoll
426	take considerable time (one syscall per file descriptor) and is of course	498	set, which can take considerable time (one syscall per file descriptor)
427	hard to detect.	499	and is of course hard to detect.
428		500
429	Epoll is also notoriously buggy - embedding epoll fds I<should> work, but	501	Epoll is also notoriously buggy - embedding epoll fds I<should> work, but
430	of course I<doesn't>, and epoll just loves to report events for totally	502	of course I<doesn't>, and epoll just loves to report events for totally
431	I<different> file descriptors (even already closed ones, so one cannot	503	I<different> file descriptors (even already closed ones, so one cannot
432	even remove them from the set) than registered in the set (especially	504	even remove them from the set) than registered in the set (especially
433	on SMP systems). Libev tries to counter these spurious notifications by	505	on SMP systems). Libev tries to counter these spurious notifications by
434	employing an additional generation counter and comparing that against the	506	employing an additional generation counter and comparing that against the
435	events to filter out spurious ones, recreating the set when required.	507	events to filter out spurious ones, recreating the set when required. Last
		508	not least, it also refuses to work with some file descriptors which work
		509	perfectly fine with C<select> (files, many character devices...).
		510
		511	Epoll is truly the train wreck analog among event poll mechanisms.
436		512
437	While stopping, setting and starting an I/O watcher in the same iteration	513	While stopping, setting and starting an I/O watcher in the same iteration
438	will result in some caching, there is still a system call per such	514	will result in some caching, there is still a system call per such
439	incident (because the same I<file descriptor> could point to a different	515	incident (because the same I<file descriptor> could point to a different
440	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed	516	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed
…		…
529		605
530	Try all backends (even potentially broken ones that wouldn't be tried	606	Try all backends (even potentially broken ones that wouldn't be tried
531	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	607	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
532	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	608	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
533		609
534	It is definitely not recommended to use this flag.	610	It is definitely not recommended to use this flag, use whatever
		611	C<ev_recommended_backends ()> returns, or simply do not specify a backend
		612	at all.
		613
		614	=item C<EVBACKEND_MASK>
		615
		616	Not a backend at all, but a mask to select all backend bits from a
		617	C<flags> value, in case you want to mask out any backends from a flags
		618	value (e.g. when modifying the C<LIBEV_FLAGS> environment variable).
535		619
536	=back	620	=back
537		621
538	If one or more of the backend flags are or'ed into the flags value,	622	If one or more of the backend flags are or'ed into the flags value,
539	then only these backends will be tried (in the reverse order as listed	623	then only these backends will be tried (in the reverse order as listed
540	here). If none are specified, all backends in C<ev_recommended_backends	624	here). If none are specified, all backends in C<ev_recommended_backends
541	()> will be tried.	625	()> will be tried.
542		626
543	Example: This is the most typical usage.
544
545	if (!ev_default_loop (0))
546	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
547
548	Example: Restrict libev to the select and poll backends, and do not allow
549	environment settings to be taken into account:
550
551	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
552
553	Example: Use whatever libev has to offer, but make sure that kqueue is
554	used if available (warning, breaks stuff, best use only with your own
555	private event loop and only if you know the OS supports your types of
556	fds):
557
558	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
559
560	=item struct ev_loop *ev_loop_new (unsigned int flags)
561
562	Similar to C<ev_default_loop>, but always creates a new event loop that is
563	always distinct from the default loop. Unlike the default loop, it cannot
564	handle signal and child watchers, and attempts to do so will be greeted by
565	undefined behaviour (or a failed assertion if assertions are enabled).
566
567	Note that this function I<is> thread-safe, and the recommended way to use
568	libev with threads is indeed to create one loop per thread, and using the
569	default loop in the "main" or "initial" thread.
570
571	Example: Try to create a event loop that uses epoll and nothing else.	627	Example: Try to create a event loop that uses epoll and nothing else.
572		628
573	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	629	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
574	if (!epoller)	630	if (!epoller)
575	fatal ("no epoll found here, maybe it hides under your chair");	631	fatal ("no epoll found here, maybe it hides under your chair");
576		632
		633	Example: Use whatever libev has to offer, but make sure that kqueue is
		634	used if available.
		635
		636	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_KQUEUE);
		637
577	=item ev_default_destroy ()	638	=item ev_loop_destroy (loop)
578		639
579	Destroys the default loop again (frees all memory and kernel state	640	Destroys an event loop object (frees all memory and kernel state
580	etc.). None of the active event watchers will be stopped in the normal	641	etc.). None of the active event watchers will be stopped in the normal
581	sense, so e.g. C<ev_is_active> might still return true. It is your	642	sense, so e.g. C<ev_is_active> might still return true. It is your
582	responsibility to either stop all watchers cleanly yourself I<before>	643	responsibility to either stop all watchers cleanly yourself I<before>
583	calling this function, or cope with the fact afterwards (which is usually	644	calling this function, or cope with the fact afterwards (which is usually
584	the easiest thing, you can just ignore the watchers and/or C<free ()> them	645	the easiest thing, you can just ignore the watchers and/or C<free ()> them
…		…
586		647
587	Note that certain global state, such as signal state (and installed signal	648	Note that certain global state, such as signal state (and installed signal
588	handlers), will not be freed by this function, and related watchers (such	649	handlers), will not be freed by this function, and related watchers (such
589	as signal and child watchers) would need to be stopped manually.	650	as signal and child watchers) would need to be stopped manually.
590		651
591	In general it is not advisable to call this function except in the	652	This function is normally used on loop objects allocated by
592	rare occasion where you really need to free e.g. the signal handling	653	C<ev_loop_new>, but it can also be used on the default loop returned by
		654	C<ev_default_loop>, in which case it is not thread-safe.
		655
		656	Note that it is not advisable to call this function on the default loop
		657	except in the rare occasion where you really need to free its resources.
593	pipe fds. If you need dynamically allocated loops it is better to use	658	If you need dynamically allocated loops it is better to use C<ev_loop_new>
594	C<ev_loop_new> and C<ev_loop_destroy>).	659	and C<ev_loop_destroy>.
595		660
596	=item ev_loop_destroy (loop)	661	=item ev_loop_fork (loop)
597		662
598	Like C<ev_default_destroy>, but destroys an event loop created by an
599	earlier call to C<ev_loop_new>.
600
601	=item ev_default_fork ()
602
603	This function sets a flag that causes subsequent C<ev_loop> iterations	663	This function sets a flag that causes subsequent C<ev_run> iterations to
604	to reinitialise the kernel state for backends that have one. Despite the	664	reinitialise the kernel state for backends that have one. Despite the
605	name, you can call it anytime, but it makes most sense after forking, in	665	name, you can call it anytime, but it makes most sense after forking, in
606	the child process (or both child and parent, but that again makes little	666	the child process. You I<must> call it (or use C<EVFLAG_FORKCHECK>) in the
607	sense). You I<must> call it in the child before using any of the libev	667	child before resuming or calling C<ev_run>.
608	functions, and it will only take effect at the next C<ev_loop> iteration.	668
		669	Again, you I<have> to call it on I<any> loop that you want to re-use after
		670	a fork, I<even if you do not plan to use the loop in the parent>. This is
		671	because some kernel interfaces *cough* I<kqueue> *cough* do funny things
		672	during fork.
609		673
610	On the other hand, you only need to call this function in the child	674	On the other hand, you only need to call this function in the child
611	process if and only if you want to use the event library in the child. If	675	process if and only if you want to use the event loop in the child. If
612	you just fork+exec, you don't have to call it at all.	676	you just fork+exec or create a new loop in the child, you don't have to
		677	call it at all (in fact, C<epoll> is so badly broken that it makes a
		678	difference, but libev will usually detect this case on its own and do a
		679	costly reset of the backend).
613		680
614	The function itself is quite fast and it's usually not a problem to call	681	The function itself is quite fast and it's usually not a problem to call
615	it just in case after a fork. To make this easy, the function will fit in	682	it just in case after a fork.
616	quite nicely into a call to C<pthread_atfork>:
617		683
		684	Example: Automate calling C<ev_loop_fork> on the default loop when
		685	using pthreads.
		686
		687	static void
		688	post_fork_child (void)
		689	{
		690	ev_loop_fork (EV_DEFAULT);
		691	}
		692
		693	...
618	pthread_atfork (0, 0, ev_default_fork);	694	pthread_atfork (0, 0, post_fork_child);
619
620	=item ev_loop_fork (loop)
621
622	Like C<ev_default_fork>, but acts on an event loop created by
623	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
624	after fork that you want to re-use in the child, and how you do this is
625	entirely your own problem.
626		695
627	=item int ev_is_default_loop (loop)	696	=item int ev_is_default_loop (loop)
628		697
629	Returns true when the given loop is, in fact, the default loop, and false	698	Returns true when the given loop is, in fact, the default loop, and false
630	otherwise.	699	otherwise.
631		700
632	=item unsigned int ev_loop_count (loop)	701	=item unsigned int ev_iteration (loop)
633		702
634	Returns the count of loop iterations for the loop, which is identical to	703	Returns the current iteration count for the event loop, which is identical
635	the number of times libev did poll for new events. It starts at C<0> and	704	to the number of times libev did poll for new events. It starts at C<0>
636	happily wraps around with enough iterations.	705	and happily wraps around with enough iterations.
637		706
638	This value can sometimes be useful as a generation counter of sorts (it	707	This value can sometimes be useful as a generation counter of sorts (it
639	"ticks" the number of loop iterations), as it roughly corresponds with	708	"ticks" the number of loop iterations), as it roughly corresponds with
640	C<ev_prepare> and C<ev_check> calls.	709	C<ev_prepare> and C<ev_check> calls - and is incremented between the
		710	prepare and check phases.
641		711
642	=item unsigned int ev_loop_depth (loop)	712	=item unsigned int ev_depth (loop)
643		713
644	Returns the number of times C<ev_loop> was entered minus the number of	714	Returns the number of times C<ev_run> was entered minus the number of
645	times C<ev_loop> was exited, in other words, the recursion depth.	715	times C<ev_run> was exited normally, in other words, the recursion depth.
646		716
647	Outside C<ev_loop>, this number is zero. In a callback, this number is	717	Outside C<ev_run>, this number is zero. In a callback, this number is
648	C<1>, unless C<ev_loop> was invoked recursively (or from another thread),	718	C<1>, unless C<ev_run> was invoked recursively (or from another thread),
649	in which case it is higher.	719	in which case it is higher.
650		720
651	Leaving C<ev_loop> abnormally (setjmp/longjmp, cancelling the thread	721	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread,
652	etc.), doesn't count as exit.	722	throwing an exception etc.), doesn't count as "exit" - consider this
		723	as a hint to avoid such ungentleman-like behaviour unless it's really
		724	convenient, in which case it is fully supported.
653		725
654	=item unsigned int ev_backend (loop)	726	=item unsigned int ev_backend (loop)
655		727
656	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	728	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
657	use.	729	use.
…		…
666		738
667	=item ev_now_update (loop)	739	=item ev_now_update (loop)
668		740
669	Establishes the current time by querying the kernel, updating the time	741	Establishes the current time by querying the kernel, updating the time
670	returned by C<ev_now ()> in the progress. This is a costly operation and	742	returned by C<ev_now ()> in the progress. This is a costly operation and
671	is usually done automatically within C<ev_loop ()>.	743	is usually done automatically within C<ev_run ()>.
672		744
673	This function is rarely useful, but when some event callback runs for a	745	This function is rarely useful, but when some event callback runs for a
674	very long time without entering the event loop, updating libev's idea of	746	very long time without entering the event loop, updating libev's idea of
675	the current time is a good idea.	747	the current time is a good idea.
676		748
…		…
678		750
679	=item ev_suspend (loop)	751	=item ev_suspend (loop)
680		752
681	=item ev_resume (loop)	753	=item ev_resume (loop)
682		754
683	These two functions suspend and resume a loop, for use when the loop is	755	These two functions suspend and resume an event loop, for use when the
684	not used for a while and timeouts should not be processed.	756	loop is not used for a while and timeouts should not be processed.
685		757
686	A typical use case would be an interactive program such as a game: When	758	A typical use case would be an interactive program such as a game: When
687	the user presses C<^Z> to suspend the game and resumes it an hour later it	759	the user presses C<^Z> to suspend the game and resumes it an hour later it
688	would be best to handle timeouts as if no time had actually passed while	760	would be best to handle timeouts as if no time had actually passed while
689	the program was suspended. This can be achieved by calling C<ev_suspend>	761	the program was suspended. This can be achieved by calling C<ev_suspend>
…		…
691	C<ev_resume> directly afterwards to resume timer processing.	763	C<ev_resume> directly afterwards to resume timer processing.
692		764
693	Effectively, all C<ev_timer> watchers will be delayed by the time spend	765	Effectively, all C<ev_timer> watchers will be delayed by the time spend
694	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers	766	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers
695	will be rescheduled (that is, they will lose any events that would have	767	will be rescheduled (that is, they will lose any events that would have
696	occured while suspended).	768	occurred while suspended).
697		769
698	After calling C<ev_suspend> you B<must not> call I<any> function on the	770	After calling C<ev_suspend> you B<must not> call I<any> function on the
699	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>	771	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>
700	without a previous call to C<ev_suspend>.	772	without a previous call to C<ev_suspend>.
701		773
702	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the	774	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the
703	event loop time (see C<ev_now_update>).	775	event loop time (see C<ev_now_update>).
704		776
705	=item ev_loop (loop, int flags)	777	=item ev_run (loop, int flags)
706		778
707	Finally, this is it, the event handler. This function usually is called	779	Finally, this is it, the event handler. This function usually is called
708	after you initialised all your watchers and you want to start handling	780	after you have initialised all your watchers and you want to start
709	events.	781	handling events. It will ask the operating system for any new events, call
		782	the watcher callbacks, an then repeat the whole process indefinitely: This
		783	is why event loops are called I<loops>.
710		784
711	If the flags argument is specified as C<0>, it will not return until	785	If the flags argument is specified as C<0>, it will keep handling events
712	either no event watchers are active anymore or C<ev_unloop> was called.	786	until either no event watchers are active anymore or C<ev_break> was
		787	called.
713		788
714	Please note that an explicit C<ev_unloop> is usually better than	789	Please note that an explicit C<ev_break> is usually better than
715	relying on all watchers to be stopped when deciding when a program has	790	relying on all watchers to be stopped when deciding when a program has
716	finished (especially in interactive programs), but having a program	791	finished (especially in interactive programs), but having a program
717	that automatically loops as long as it has to and no longer by virtue	792	that automatically loops as long as it has to and no longer by virtue
718	of relying on its watchers stopping correctly, that is truly a thing of	793	of relying on its watchers stopping correctly, that is truly a thing of
719	beauty.	794	beauty.
720		795
		796	This function is also I<mostly> exception-safe - you can break out of
		797	a C<ev_run> call by calling C<longjmp> in a callback, throwing a C++
		798	exception and so on. This does not decrement the C<ev_depth> value, nor
		799	will it clear any outstanding C<EVBREAK_ONE> breaks.
		800
721	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle	801	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle
722	those events and any already outstanding ones, but will not block your	802	those events and any already outstanding ones, but will not wait and
723	process in case there are no events and will return after one iteration of	803	block your process in case there are no events and will return after one
724	the loop.	804	iteration of the loop. This is sometimes useful to poll and handle new
		805	events while doing lengthy calculations, to keep the program responsive.
725		806
726	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if	807	A flags value of C<EVRUN_ONCE> will look for new events (waiting if
727	necessary) and will handle those and any already outstanding ones. It	808	necessary) and will handle those and any already outstanding ones. It
728	will block your process until at least one new event arrives (which could	809	will block your process until at least one new event arrives (which could
729	be an event internal to libev itself, so there is no guarantee that a	810	be an event internal to libev itself, so there is no guarantee that a
730	user-registered callback will be called), and will return after one	811	user-registered callback will be called), and will return after one
731	iteration of the loop.	812	iteration of the loop.
732		813
733	This is useful if you are waiting for some external event in conjunction	814	This is useful if you are waiting for some external event in conjunction
734	with something not expressible using other libev watchers (i.e. "roll your	815	with something not expressible using other libev watchers (i.e. "roll your
735	own C<ev_loop>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is	816	own C<ev_run>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is
736	usually a better approach for this kind of thing.	817	usually a better approach for this kind of thing.
737		818
738	Here are the gory details of what C<ev_loop> does:	819	Here are the gory details of what C<ev_run> does:
739		820
		821	- Increment loop depth.
		822	- Reset the ev_break status.
740	- Before the first iteration, call any pending watchers.	823	- Before the first iteration, call any pending watchers.
		824	LOOP:
741	* If EVFLAG_FORKCHECK was used, check for a fork.	825	- If EVFLAG_FORKCHECK was used, check for a fork.
742	- If a fork was detected (by any means), queue and call all fork watchers.	826	- If a fork was detected (by any means), queue and call all fork watchers.
743	- Queue and call all prepare watchers.	827	- Queue and call all prepare watchers.
		828	- If ev_break was called, goto FINISH.
744	- If we have been forked, detach and recreate the kernel state	829	- If we have been forked, detach and recreate the kernel state
745	as to not disturb the other process.	830	as to not disturb the other process.
746	- Update the kernel state with all outstanding changes.	831	- Update the kernel state with all outstanding changes.
747	- Update the "event loop time" (ev_now ()).	832	- Update the "event loop time" (ev_now ()).
748	- Calculate for how long to sleep or block, if at all	833	- Calculate for how long to sleep or block, if at all
749	(active idle watchers, EVLOOP_NONBLOCK or not having	834	(active idle watchers, EVRUN_NOWAIT or not having
750	any active watchers at all will result in not sleeping).	835	any active watchers at all will result in not sleeping).
751	- Sleep if the I/O and timer collect interval say so.	836	- Sleep if the I/O and timer collect interval say so.
		837	- Increment loop iteration counter.
752	- Block the process, waiting for any events.	838	- Block the process, waiting for any events.
753	- Queue all outstanding I/O (fd) events.	839	- Queue all outstanding I/O (fd) events.
754	- Update the "event loop time" (ev_now ()), and do time jump adjustments.	840	- Update the "event loop time" (ev_now ()), and do time jump adjustments.
755	- Queue all expired timers.	841	- Queue all expired timers.
756	- Queue all expired periodics.	842	- Queue all expired periodics.
757	- Unless any events are pending now, queue all idle watchers.	843	- Queue all idle watchers with priority higher than that of pending events.
758	- Queue all check watchers.	844	- Queue all check watchers.
759	- Call all queued watchers in reverse order (i.e. check watchers first).	845	- Call all queued watchers in reverse order (i.e. check watchers first).
760	Signals and child watchers are implemented as I/O watchers, and will	846	Signals and child watchers are implemented as I/O watchers, and will
761	be handled here by queueing them when their watcher gets executed.	847	be handled here by queueing them when their watcher gets executed.
762	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	848	- If ev_break has been called, or EVRUN_ONCE or EVRUN_NOWAIT
763	were used, or there are no active watchers, return, otherwise	849	were used, or there are no active watchers, goto FINISH, otherwise
764	continue with step *.	850	continue with step LOOP.
		851	FINISH:
		852	- Reset the ev_break status iff it was EVBREAK_ONE.
		853	- Decrement the loop depth.
		854	- Return.
765		855
766	Example: Queue some jobs and then loop until no events are outstanding	856	Example: Queue some jobs and then loop until no events are outstanding
767	anymore.	857	anymore.
768		858
769	... queue jobs here, make sure they register event watchers as long	859	... queue jobs here, make sure they register event watchers as long
770	... as they still have work to do (even an idle watcher will do..)	860	... as they still have work to do (even an idle watcher will do..)
771	ev_loop (my_loop, 0);	861	ev_run (my_loop, 0);
772	... jobs done or somebody called unloop. yeah!	862	... jobs done or somebody called unloop. yeah!
773		863
774	=item ev_unloop (loop, how)	864	=item ev_break (loop, how)
775		865
776	Can be used to make a call to C<ev_loop> return early (but only after it	866	Can be used to make a call to C<ev_run> return early (but only after it
777	has processed all outstanding events). The C<how> argument must be either	867	has processed all outstanding events). The C<how> argument must be either
778	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	868	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or
779	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	869	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.
780		870
781	This "unloop state" will be cleared when entering C<ev_loop> again.	871	This "break state" will be cleared on the next call to C<ev_run>.
782		872
783	It is safe to call C<ev_unloop> from otuside any C<ev_loop> calls.	873	It is safe to call C<ev_break> from outside any C<ev_run> calls, too, in
		874	which case it will have no effect.
784		875
785	=item ev_ref (loop)	876	=item ev_ref (loop)
786		877
787	=item ev_unref (loop)	878	=item ev_unref (loop)
788		879
789	Ref/unref can be used to add or remove a reference count on the event	880	Ref/unref can be used to add or remove a reference count on the event
790	loop: Every watcher keeps one reference, and as long as the reference	881	loop: Every watcher keeps one reference, and as long as the reference
791	count is nonzero, C<ev_loop> will not return on its own.	882	count is nonzero, C<ev_run> will not return on its own.
792		883
793	If you have a watcher you never unregister that should not keep C<ev_loop>	884	This is useful when you have a watcher that you never intend to
794	from returning, call ev_unref() after starting, and ev_ref() before	885	unregister, but that nevertheless should not keep C<ev_run> from
		886	returning. In such a case, call C<ev_unref> after starting, and C<ev_ref>
795	stopping it.	887	before stopping it.
796		888
797	As an example, libev itself uses this for its internal signal pipe: It	889	As an example, libev itself uses this for its internal signal pipe: It
798	is not visible to the libev user and should not keep C<ev_loop> from	890	is not visible to the libev user and should not keep C<ev_run> from
799	exiting if no event watchers registered by it are active. It is also an	891	exiting if no event watchers registered by it are active. It is also an
800	excellent way to do this for generic recurring timers or from within	892	excellent way to do this for generic recurring timers or from within
801	third-party libraries. Just remember to I<unref after start> and I<ref	893	third-party libraries. Just remember to I<unref after start> and I<ref
802	before stop> (but only if the watcher wasn't active before, or was active	894	before stop> (but only if the watcher wasn't active before, or was active
803	before, respectively. Note also that libev might stop watchers itself	895	before, respectively. Note also that libev might stop watchers itself
804	(e.g. non-repeating timers) in which case you have to C<ev_ref>	896	(e.g. non-repeating timers) in which case you have to C<ev_ref>
805	in the callback).	897	in the callback).
806		898
807	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	899	Example: Create a signal watcher, but keep it from keeping C<ev_run>
808	running when nothing else is active.	900	running when nothing else is active.
809		901
810	ev_signal exitsig;	902	ev_signal exitsig;
811	ev_signal_init (&exitsig, sig_cb, SIGINT);	903	ev_signal_init (&exitsig, sig_cb, SIGINT);
812	ev_signal_start (loop, &exitsig);	904	ev_signal_start (loop, &exitsig);
813	evf_unref (loop);	905	ev_unref (loop);
814		906
815	Example: For some weird reason, unregister the above signal handler again.	907	Example: For some weird reason, unregister the above signal handler again.
816		908
817	ev_ref (loop);	909	ev_ref (loop);
818	ev_signal_stop (loop, &exitsig);	910	ev_signal_stop (loop, &exitsig);
…		…
857	usually doesn't make much sense to set it to a lower value than C<0.01>,	949	usually doesn't make much sense to set it to a lower value than C<0.01>,
858	as this approaches the timing granularity of most systems. Note that if	950	as this approaches the timing granularity of most systems. Note that if
859	you do transactions with the outside world and you can't increase the	951	you do transactions with the outside world and you can't increase the
860	parallelity, then this setting will limit your transaction rate (if you	952	parallelity, then this setting will limit your transaction rate (if you
861	need to poll once per transaction and the I/O collect interval is 0.01,	953	need to poll once per transaction and the I/O collect interval is 0.01,
862	then you can't do more than 100 transations per second).	954	then you can't do more than 100 transactions per second).
863		955
864	Setting the I<timeout collect interval> can improve the opportunity for	956	Setting the I<timeout collect interval> can improve the opportunity for
865	saving power, as the program will "bundle" timer callback invocations that	957	saving power, as the program will "bundle" timer callback invocations that
866	are "near" in time together, by delaying some, thus reducing the number of	958	are "near" in time together, by delaying some, thus reducing the number of
867	times the process sleeps and wakes up again. Another useful technique to	959	times the process sleeps and wakes up again. Another useful technique to
…		…
875	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);	967	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);
876		968
877	=item ev_invoke_pending (loop)	969	=item ev_invoke_pending (loop)
878		970
879	This call will simply invoke all pending watchers while resetting their	971	This call will simply invoke all pending watchers while resetting their
880	pending state. Normally, C<ev_loop> does this automatically when required,	972	pending state. Normally, C<ev_run> does this automatically when required,
881	but when overriding the invoke callback this call comes handy.	973	but when overriding the invoke callback this call comes handy. This
		974	function can be invoked from a watcher - this can be useful for example
		975	when you want to do some lengthy calculation and want to pass further
		976	event handling to another thread (you still have to make sure only one
		977	thread executes within C<ev_invoke_pending> or C<ev_run> of course).
882		978
883	=item int ev_pending_count (loop)	979	=item int ev_pending_count (loop)
884		980
885	Returns the number of pending watchers - zero indicates that no watchers	981	Returns the number of pending watchers - zero indicates that no watchers
886	are pending.	982	are pending.
887		983
888	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))	984	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))
889		985
890	This overrides the invoke pending functionality of the loop: Instead of	986	This overrides the invoke pending functionality of the loop: Instead of
891	invoking all pending watchers when there are any, C<ev_loop> will call	987	invoking all pending watchers when there are any, C<ev_run> will call
892	this callback instead. This is useful, for example, when you want to	988	this callback instead. This is useful, for example, when you want to
893	invoke the actual watchers inside another context (another thread etc.).	989	invoke the actual watchers inside another context (another thread etc.).
894		990
895	If you want to reset the callback, use C<ev_invoke_pending> as new	991	If you want to reset the callback, use C<ev_invoke_pending> as new
896	callback.	992	callback.
…		…
899		995
900	Sometimes you want to share the same loop between multiple threads. This	996	Sometimes you want to share the same loop between multiple threads. This
901	can be done relatively simply by putting mutex_lock/unlock calls around	997	can be done relatively simply by putting mutex_lock/unlock calls around
902	each call to a libev function.	998	each call to a libev function.
903		999
904	However, C<ev_loop> can run an indefinite time, so it is not feasible to	1000	However, C<ev_run> can run an indefinite time, so it is not feasible
905	wait for it to return. One way around this is to wake up the loop via	1001	to wait for it to return. One way around this is to wake up the event
906	C<ev_unloop> and C<av_async_send>, another way is to set these I<release>	1002	loop via C<ev_break> and C<av_async_send>, another way is to set these
907	and I<acquire> callbacks on the loop.	1003	I<release> and I<acquire> callbacks on the loop.
908		1004
909	When set, then C<release> will be called just before the thread is	1005	When set, then C<release> will be called just before the thread is
910	suspended waiting for new events, and C<acquire> is called just	1006	suspended waiting for new events, and C<acquire> is called just
911	afterwards.	1007	afterwards.
912		1008
…		…
915		1011
916	While event loop modifications are allowed between invocations of	1012	While event loop modifications are allowed between invocations of
917	C<release> and C<acquire> (that's their only purpose after all), no	1013	C<release> and C<acquire> (that's their only purpose after all), no
918	modifications done will affect the event loop, i.e. adding watchers will	1014	modifications done will affect the event loop, i.e. adding watchers will
919	have no effect on the set of file descriptors being watched, or the time	1015	have no effect on the set of file descriptors being watched, or the time
920	waited. USe an C<ev_async> watcher to wake up C<ev_loop> when you want it	1016	waited. Use an C<ev_async> watcher to wake up C<ev_run> when you want it
921	to take note of any changes you made.	1017	to take note of any changes you made.
922		1018
923	In theory, threads executing C<ev_loop> will be async-cancel safe between	1019	In theory, threads executing C<ev_run> will be async-cancel safe between
924	invocations of C<release> and C<acquire>.	1020	invocations of C<release> and C<acquire>.
925		1021
926	See also the locking example in the C<THREADS> section later in this	1022	See also the locking example in the C<THREADS> section later in this
927	document.	1023	document.
928		1024
929	=item ev_set_userdata (loop, void *data)	1025	=item ev_set_userdata (loop, void *data)
930		1026
931	=item ev_userdata (loop)	1027	=item void *ev_userdata (loop)
932		1028
933	Set and retrieve a single C<void *> associated with a loop. When	1029	Set and retrieve a single C<void *> associated with a loop. When
934	C<ev_set_userdata> has never been called, then C<ev_userdata> returns	1030	C<ev_set_userdata> has never been called, then C<ev_userdata> returns
935	C<0.>	1031	C<0>.
936		1032
937	These two functions can be used to associate arbitrary data with a loop,	1033	These two functions can be used to associate arbitrary data with a loop,
938	and are intended solely for the C<invoke_pending_cb>, C<release> and	1034	and are intended solely for the C<invoke_pending_cb>, C<release> and
939	C<acquire> callbacks described above, but of course can be (ab-)used for	1035	C<acquire> callbacks described above, but of course can be (ab-)used for
940	any other purpose as well.	1036	any other purpose as well.
941		1037
942	=item ev_loop_verify (loop)	1038	=item ev_verify (loop)
943		1039
944	This function only does something when C<EV_VERIFY> support has been	1040	This function only does something when C<EV_VERIFY> support has been
945	compiled in, which is the default for non-minimal builds. It tries to go	1041	compiled in, which is the default for non-minimal builds. It tries to go
946	through all internal structures and checks them for validity. If anything	1042	through all internal structures and checks them for validity. If anything
947	is found to be inconsistent, it will print an error message to standard	1043	is found to be inconsistent, it will print an error message to standard
…		…
958		1054
959	In the following description, uppercase C<TYPE> in names stands for the	1055	In the following description, uppercase C<TYPE> in names stands for the
960	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer	1056	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer
961	watchers and C<ev_io_start> for I/O watchers.	1057	watchers and C<ev_io_start> for I/O watchers.
962		1058
963	A watcher is a structure that you create and register to record your	1059	A watcher is an opaque structure that you allocate and register to record
964	interest in some event. For instance, if you want to wait for STDIN to	1060	your interest in some event. To make a concrete example, imagine you want
965	become readable, you would create an C<ev_io> watcher for that:	1061	to wait for STDIN to become readable, you would create an C<ev_io> watcher
		1062	for that:
966		1063
967	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)	1064	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)
968	{	1065	{
969	ev_io_stop (w);	1066	ev_io_stop (w);
970	ev_unloop (loop, EVUNLOOP_ALL);	1067	ev_break (loop, EVBREAK_ALL);
971	}	1068	}
972		1069
973	struct ev_loop *loop = ev_default_loop (0);	1070	struct ev_loop *loop = ev_default_loop (0);
974		1071
975	ev_io stdin_watcher;	1072	ev_io stdin_watcher;
976		1073
977	ev_init (&stdin_watcher, my_cb);	1074	ev_init (&stdin_watcher, my_cb);
978	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);	1075	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
979	ev_io_start (loop, &stdin_watcher);	1076	ev_io_start (loop, &stdin_watcher);
980		1077
981	ev_loop (loop, 0);	1078	ev_run (loop, 0);
982		1079
983	As you can see, you are responsible for allocating the memory for your	1080	As you can see, you are responsible for allocating the memory for your
984	watcher structures (and it is I<usually> a bad idea to do this on the	1081	watcher structures (and it is I<usually> a bad idea to do this on the
985	stack).	1082	stack).
986		1083
987	Each watcher has an associated watcher structure (called C<struct ev_TYPE>	1084	Each watcher has an associated watcher structure (called C<struct ev_TYPE>
988	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).	1085	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).
989		1086
990	Each watcher structure must be initialised by a call to C<ev_init	1087	Each watcher structure must be initialised by a call to C<ev_init (watcher
991	(watcher *, callback)>, which expects a callback to be provided. This	1088	*, callback)>, which expects a callback to be provided. This callback is
992	callback gets invoked each time the event occurs (or, in the case of I/O	1089	invoked each time the event occurs (or, in the case of I/O watchers, each
993	watchers, each time the event loop detects that the file descriptor given	1090	time the event loop detects that the file descriptor given is readable
994	is readable and/or writable).	1091	and/or writable).
995		1092
996	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>	1093	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>
997	macro to configure it, with arguments specific to the watcher type. There	1094	macro to configure it, with arguments specific to the watcher type. There
998	is also a macro to combine initialisation and setting in one call: C<<	1095	is also a macro to combine initialisation and setting in one call: C<<
999	ev_TYPE_init (watcher *, callback, ...) >>.	1096	ev_TYPE_init (watcher *, callback, ...) >>.
…		…
1022	=item C<EV_WRITE>	1119	=item C<EV_WRITE>
1023		1120
1024	The file descriptor in the C<ev_io> watcher has become readable and/or	1121	The file descriptor in the C<ev_io> watcher has become readable and/or
1025	writable.	1122	writable.
1026		1123
1027	=item C<EV_TIMEOUT>	1124	=item C<EV_TIMER>
1028		1125
1029	The C<ev_timer> watcher has timed out.	1126	The C<ev_timer> watcher has timed out.
1030		1127
1031	=item C<EV_PERIODIC>	1128	=item C<EV_PERIODIC>
1032		1129
…		…
1050		1147
1051	=item C<EV_PREPARE>	1148	=item C<EV_PREPARE>
1052		1149
1053	=item C<EV_CHECK>	1150	=item C<EV_CHECK>
1054		1151
1055	All C<ev_prepare> watchers are invoked just I<before> C<ev_loop> starts	1152	All C<ev_prepare> watchers are invoked just I<before> C<ev_run> starts
1056	to gather new events, and all C<ev_check> watchers are invoked just after	1153	to gather new events, and all C<ev_check> watchers are invoked just after
1057	C<ev_loop> has gathered them, but before it invokes any callbacks for any	1154	C<ev_run> has gathered them, but before it invokes any callbacks for any
1058	received events. Callbacks of both watcher types can start and stop as	1155	received events. Callbacks of both watcher types can start and stop as
1059	many watchers as they want, and all of them will be taken into account	1156	many watchers as they want, and all of them will be taken into account
1060	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	1157	(for example, a C<ev_prepare> watcher might start an idle watcher to keep
1061	C<ev_loop> from blocking).	1158	C<ev_run> from blocking).
1062		1159
1063	=item C<EV_EMBED>	1160	=item C<EV_EMBED>
1064		1161
1065	The embedded event loop specified in the C<ev_embed> watcher needs attention.	1162	The embedded event loop specified in the C<ev_embed> watcher needs attention.
1066		1163
1067	=item C<EV_FORK>	1164	=item C<EV_FORK>
1068		1165
1069	The event loop has been resumed in the child process after fork (see	1166	The event loop has been resumed in the child process after fork (see
1070	C<ev_fork>).	1167	C<ev_fork>).
		1168
		1169	=item C<EV_CLEANUP>
		1170
		1171	The event loop is about to be destroyed (see C<ev_cleanup>).
1071		1172
1072	=item C<EV_ASYNC>	1173	=item C<EV_ASYNC>
1073		1174
1074	The given async watcher has been asynchronously notified (see C<ev_async>).	1175	The given async watcher has been asynchronously notified (see C<ev_async>).
1075		1176
…		…
1122		1223
1123	ev_io w;	1224	ev_io w;
1124	ev_init (&w, my_cb);	1225	ev_init (&w, my_cb);
1125	ev_io_set (&w, STDIN_FILENO, EV_READ);	1226	ev_io_set (&w, STDIN_FILENO, EV_READ);
1126		1227
1127	=item C<ev_TYPE_set> (ev_TYPE *, [args])	1228	=item C<ev_TYPE_set> (ev_TYPE *watcher, [args])
1128		1229
1129	This macro initialises the type-specific parts of a watcher. You need to	1230	This macro initialises the type-specific parts of a watcher. You need to
1130	call C<ev_init> at least once before you call this macro, but you can	1231	call C<ev_init> at least once before you call this macro, but you can
1131	call C<ev_TYPE_set> any number of times. You must not, however, call this	1232	call C<ev_TYPE_set> any number of times. You must not, however, call this
1132	macro on a watcher that is active (it can be pending, however, which is a	1233	macro on a watcher that is active (it can be pending, however, which is a
…		…
1145		1246
1146	Example: Initialise and set an C<ev_io> watcher in one step.	1247	Example: Initialise and set an C<ev_io> watcher in one step.
1147		1248
1148	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);	1249	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);
1149		1250
1150	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)	1251	=item C<ev_TYPE_start> (loop, ev_TYPE *watcher)
1151		1252
1152	Starts (activates) the given watcher. Only active watchers will receive	1253	Starts (activates) the given watcher. Only active watchers will receive
1153	events. If the watcher is already active nothing will happen.	1254	events. If the watcher is already active nothing will happen.
1154		1255
1155	Example: Start the C<ev_io> watcher that is being abused as example in this	1256	Example: Start the C<ev_io> watcher that is being abused as example in this
1156	whole section.	1257	whole section.
1157		1258
1158	ev_io_start (EV_DEFAULT_UC, &w);	1259	ev_io_start (EV_DEFAULT_UC, &w);
1159		1260
1160	=item C<ev_TYPE_stop> (loop *, ev_TYPE *watcher)	1261	=item C<ev_TYPE_stop> (loop, ev_TYPE *watcher)
1161		1262
1162	Stops the given watcher if active, and clears the pending status (whether	1263	Stops the given watcher if active, and clears the pending status (whether
1163	the watcher was active or not).	1264	the watcher was active or not).
1164		1265
1165	It is possible that stopped watchers are pending - for example,	1266	It is possible that stopped watchers are pending - for example,
…		…
1190	=item ev_cb_set (ev_TYPE *watcher, callback)	1291	=item ev_cb_set (ev_TYPE *watcher, callback)
1191		1292
1192	Change the callback. You can change the callback at virtually any time	1293	Change the callback. You can change the callback at virtually any time
1193	(modulo threads).	1294	(modulo threads).
1194		1295
1195	=item ev_set_priority (ev_TYPE *watcher, priority)	1296	=item ev_set_priority (ev_TYPE *watcher, int priority)
1196		1297
1197	=item int ev_priority (ev_TYPE *watcher)	1298	=item int ev_priority (ev_TYPE *watcher)
1198		1299
1199	Set and query the priority of the watcher. The priority is a small	1300	Set and query the priority of the watcher. The priority is a small
1200	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>	1301	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
…		…
1232	watcher isn't pending it does nothing and returns C<0>.	1333	watcher isn't pending it does nothing and returns C<0>.
1233		1334
1234	Sometimes it can be useful to "poll" a watcher instead of waiting for its	1335	Sometimes it can be useful to "poll" a watcher instead of waiting for its
1235	callback to be invoked, which can be accomplished with this function.	1336	callback to be invoked, which can be accomplished with this function.
1236		1337
		1338	=item ev_feed_event (loop, ev_TYPE *watcher, int revents)
		1339
		1340	Feeds the given event set into the event loop, as if the specified event
		1341	had happened for the specified watcher (which must be a pointer to an
		1342	initialised but not necessarily started event watcher). Obviously you must
		1343	not free the watcher as long as it has pending events.
		1344
		1345	Stopping the watcher, letting libev invoke it, or calling
		1346	C<ev_clear_pending> will clear the pending event, even if the watcher was
		1347	not started in the first place.
		1348
		1349	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
		1350	functions that do not need a watcher.
		1351
1237	=back	1352	=back
1238
1239		1353
1240	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	1354	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
1241		1355
1242	Each watcher has, by default, a member C<void *data> that you can change	1356	Each watcher has, by default, a member C<void *data> that you can change
1243	and read at any time: libev will completely ignore it. This can be used	1357	and read at any time: libev will completely ignore it. This can be used
…		…
1299	t2_cb (EV_P_ ev_timer *w, int revents)	1413	t2_cb (EV_P_ ev_timer *w, int revents)
1300	{	1414	{
1301	struct my_biggy big = (struct my_biggy *)	1415	struct my_biggy big = (struct my_biggy *)
1302	(((char *)w) - offsetof (struct my_biggy, t2));	1416	(((char *)w) - offsetof (struct my_biggy, t2));
1303	}	1417	}
		1418
		1419	=head2 WATCHER STATES
		1420
		1421	There are various watcher states mentioned throughout this manual -
		1422	active, pending and so on. In this section these states and the rules to
		1423	transition between them will be described in more detail - and while these
		1424	rules might look complicated, they usually do "the right thing".
		1425
		1426	=over 4
		1427
		1428	=item initialiased
		1429
		1430	Before a watcher can be registered with the event looop it has to be
		1431	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
		1432	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
		1433
		1434	In this state it is simply some block of memory that is suitable for use
		1435	in an event loop. It can be moved around, freed, reused etc. at will.
		1436
		1437	=item started/running/active
		1438
		1439	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
		1440	property of the event loop, and is actively waiting for events. While in
		1441	this state it cannot be accessed (except in a few documented ways), moved,
		1442	freed or anything else - the only legal thing is to keep a pointer to it,
		1443	and call libev functions on it that are documented to work on active watchers.
		1444
		1445	=item pending
		1446
		1447	If a watcher is active and libev determines that an event it is interested
		1448	in has occurred (such as a timer expiring), it will become pending. It will
		1449	stay in this pending state until either it is stopped or its callback is
		1450	about to be invoked, so it is not normally pending inside the watcher
		1451	callback.
		1452
		1453	The watcher might or might not be active while it is pending (for example,
		1454	an expired non-repeating timer can be pending but no longer active). If it
		1455	is stopped, it can be freely accessed (e.g. by calling C<ev_TYPE_set>),
		1456	but it is still property of the event loop at this time, so cannot be
		1457	moved, freed or reused. And if it is active the rules described in the
		1458	previous item still apply.
		1459
		1460	It is also possible to feed an event on a watcher that is not active (e.g.
		1461	via C<ev_feed_event>), in which case it becomes pending without being
		1462	active.
		1463
		1464	=item stopped
		1465
		1466	A watcher can be stopped implicitly by libev (in which case it might still
		1467	be pending), or explicitly by calling its C<ev_TYPE_stop> function. The
		1468	latter will clear any pending state the watcher might be in, regardless
		1469	of whether it was active or not, so stopping a watcher explicitly before
		1470	freeing it is often a good idea.
		1471
		1472	While stopped (and not pending) the watcher is essentially in the
		1473	initialised state, that is it can be reused, moved, modified in any way
		1474	you wish.
		1475
		1476	=back
1304		1477
1305	=head2 WATCHER PRIORITY MODELS	1478	=head2 WATCHER PRIORITY MODELS
1306		1479
1307	Many event loops support I<watcher priorities>, which are usually small	1480	Many event loops support I<watcher priorities>, which are usually small
1308	integers that influence the ordering of event callback invocation	1481	integers that influence the ordering of event callback invocation
…		…
1351		1524
1352	For example, to emulate how many other event libraries handle priorities,	1525	For example, to emulate how many other event libraries handle priorities,
1353	you can associate an C<ev_idle> watcher to each such watcher, and in	1526	you can associate an C<ev_idle> watcher to each such watcher, and in
1354	the normal watcher callback, you just start the idle watcher. The real	1527	the normal watcher callback, you just start the idle watcher. The real
1355	processing is done in the idle watcher callback. This causes libev to	1528	processing is done in the idle watcher callback. This causes libev to
1356	continously poll and process kernel event data for the watcher, but when	1529	continuously poll and process kernel event data for the watcher, but when
1357	the lock-out case is known to be rare (which in turn is rare :), this is	1530	the lock-out case is known to be rare (which in turn is rare :), this is
1358	workable.	1531	workable.
1359		1532
1360	Usually, however, the lock-out model implemented that way will perform	1533	Usually, however, the lock-out model implemented that way will perform
1361	miserably under the type of load it was designed to handle. In that case,	1534	miserably under the type of load it was designed to handle. In that case,
…		…
1375	{	1548	{
1376	// stop the I/O watcher, we received the event, but	1549	// stop the I/O watcher, we received the event, but
1377	// are not yet ready to handle it.	1550	// are not yet ready to handle it.
1378	ev_io_stop (EV_A_ w);	1551	ev_io_stop (EV_A_ w);
1379		1552
1380	// start the idle watcher to ahndle the actual event.	1553	// start the idle watcher to handle the actual event.
1381	// it will not be executed as long as other watchers	1554	// it will not be executed as long as other watchers
1382	// with the default priority are receiving events.	1555	// with the default priority are receiving events.
1383	ev_idle_start (EV_A_ &idle);	1556	ev_idle_start (EV_A_ &idle);
1384	}	1557	}
1385		1558
…		…
1439		1612
1440	If you cannot use non-blocking mode, then force the use of a	1613	If you cannot use non-blocking mode, then force the use of a
1441	known-to-be-good backend (at the time of this writing, this includes only	1614	known-to-be-good backend (at the time of this writing, this includes only
1442	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>). The same applies to file	1615	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>). The same applies to file
1443	descriptors for which non-blocking operation makes no sense (such as	1616	descriptors for which non-blocking operation makes no sense (such as
1444	files) - libev doesn't guarentee any specific behaviour in that case.	1617	files) - libev doesn't guarantee any specific behaviour in that case.
1445		1618
1446	Another thing you have to watch out for is that it is quite easy to	1619	Another thing you have to watch out for is that it is quite easy to
1447	receive "spurious" readiness notifications, that is your callback might	1620	receive "spurious" readiness notifications, that is your callback might
1448	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1621	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
1449	because there is no data. Not only are some backends known to create a	1622	because there is no data. Not only are some backends known to create a
…		…
1514		1687
1515	So when you encounter spurious, unexplained daemon exits, make sure you	1688	So when you encounter spurious, unexplained daemon exits, make sure you
1516	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon	1689	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
1517	somewhere, as that would have given you a big clue).	1690	somewhere, as that would have given you a big clue).
1518		1691
		1692	=head3 The special problem of accept()ing when you can't
		1693
		1694	Many implementations of the POSIX C<accept> function (for example,
		1695	found in post-2004 Linux) have the peculiar behaviour of not removing a
		1696	connection from the pending queue in all error cases.
		1697
		1698	For example, larger servers often run out of file descriptors (because
		1699	of resource limits), causing C<accept> to fail with C<ENFILE> but not
		1700	rejecting the connection, leading to libev signalling readiness on
		1701	the next iteration again (the connection still exists after all), and
		1702	typically causing the program to loop at 100% CPU usage.
		1703
		1704	Unfortunately, the set of errors that cause this issue differs between
		1705	operating systems, there is usually little the app can do to remedy the
		1706	situation, and no known thread-safe method of removing the connection to
		1707	cope with overload is known (to me).
		1708
		1709	One of the easiest ways to handle this situation is to just ignore it
		1710	- when the program encounters an overload, it will just loop until the
		1711	situation is over. While this is a form of busy waiting, no OS offers an
		1712	event-based way to handle this situation, so it's the best one can do.
		1713
		1714	A better way to handle the situation is to log any errors other than
		1715	C<EAGAIN> and C<EWOULDBLOCK>, making sure not to flood the log with such
		1716	messages, and continue as usual, which at least gives the user an idea of
		1717	what could be wrong ("raise the ulimit!"). For extra points one could stop
		1718	the C<ev_io> watcher on the listening fd "for a while", which reduces CPU
		1719	usage.
		1720
		1721	If your program is single-threaded, then you could also keep a dummy file
		1722	descriptor for overload situations (e.g. by opening F</dev/null>), and
		1723	when you run into C<ENFILE> or C<EMFILE>, close it, run C<accept>,
		1724	close that fd, and create a new dummy fd. This will gracefully refuse
		1725	clients under typical overload conditions.
		1726
		1727	The last way to handle it is to simply log the error and C<exit>, as
		1728	is often done with C<malloc> failures, but this results in an easy
		1729	opportunity for a DoS attack.
1519		1730
1520	=head3 Watcher-Specific Functions	1731	=head3 Watcher-Specific Functions
1521		1732
1522	=over 4	1733	=over 4
1523		1734
…		…
1555	...	1766	...
1556	struct ev_loop *loop = ev_default_init (0);	1767	struct ev_loop *loop = ev_default_init (0);
1557	ev_io stdin_readable;	1768	ev_io stdin_readable;
1558	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);	1769	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
1559	ev_io_start (loop, &stdin_readable);	1770	ev_io_start (loop, &stdin_readable);
1560	ev_loop (loop, 0);	1771	ev_run (loop, 0);
1561		1772
1562		1773
1563	=head2 C<ev_timer> - relative and optionally repeating timeouts	1774	=head2 C<ev_timer> - relative and optionally repeating timeouts
1564		1775
1565	Timer watchers are simple relative timers that generate an event after a	1776	Timer watchers are simple relative timers that generate an event after a
…		…
1574	The callback is guaranteed to be invoked only I<after> its timeout has	1785	The callback is guaranteed to be invoked only I<after> its timeout has
1575	passed (not I<at>, so on systems with very low-resolution clocks this	1786	passed (not I<at>, so on systems with very low-resolution clocks this
1576	might introduce a small delay). If multiple timers become ready during the	1787	might introduce a small delay). If multiple timers become ready during the
1577	same loop iteration then the ones with earlier time-out values are invoked	1788	same loop iteration then the ones with earlier time-out values are invoked
1578	before ones of the same priority with later time-out values (but this is	1789	before ones of the same priority with later time-out values (but this is
1579	no longer true when a callback calls C<ev_loop> recursively).	1790	no longer true when a callback calls C<ev_run> recursively).
1580		1791
1581	=head3 Be smart about timeouts	1792	=head3 Be smart about timeouts
1582		1793
1583	Many real-world problems involve some kind of timeout, usually for error	1794	Many real-world problems involve some kind of timeout, usually for error
1584	recovery. A typical example is an HTTP request - if the other side hangs,	1795	recovery. A typical example is an HTTP request - if the other side hangs,
…		…
1670	ev_tstamp timeout = last_activity + 60.;	1881	ev_tstamp timeout = last_activity + 60.;
1671		1882
1672	// if last_activity + 60. is older than now, we did time out	1883	// if last_activity + 60. is older than now, we did time out
1673	if (timeout < now)	1884	if (timeout < now)
1674	{	1885	{
1675	// timeout occured, take action	1886	// timeout occurred, take action
1676	}	1887	}
1677	else	1888	else
1678	{	1889	{
1679	// callback was invoked, but there was some activity, re-arm	1890	// callback was invoked, but there was some activity, re-arm
1680	// the watcher to fire in last_activity + 60, which is	1891	// the watcher to fire in last_activity + 60, which is
…		…
1702	to the current time (meaning we just have some activity :), then call the	1913	to the current time (meaning we just have some activity :), then call the
1703	callback, which will "do the right thing" and start the timer:	1914	callback, which will "do the right thing" and start the timer:
1704		1915
1705	ev_init (timer, callback);	1916	ev_init (timer, callback);
1706	last_activity = ev_now (loop);	1917	last_activity = ev_now (loop);
1707	callback (loop, timer, EV_TIMEOUT);	1918	callback (loop, timer, EV_TIMER);
1708		1919
1709	And when there is some activity, simply store the current time in	1920	And when there is some activity, simply store the current time in
1710	C<last_activity>, no libev calls at all:	1921	C<last_activity>, no libev calls at all:
1711		1922
1712	last_actiivty = ev_now (loop);	1923	last_activity = ev_now (loop);
1713		1924
1714	This technique is slightly more complex, but in most cases where the	1925	This technique is slightly more complex, but in most cases where the
1715	time-out is unlikely to be triggered, much more efficient.	1926	time-out is unlikely to be triggered, much more efficient.
1716		1927
1717	Changing the timeout is trivial as well (if it isn't hard-coded in the	1928	Changing the timeout is trivial as well (if it isn't hard-coded in the
…		…
1755		1966
1756	=head3 The special problem of time updates	1967	=head3 The special problem of time updates
1757		1968
1758	Establishing the current time is a costly operation (it usually takes at	1969	Establishing the current time is a costly operation (it usually takes at
1759	least two system calls): EV therefore updates its idea of the current	1970	least two system calls): EV therefore updates its idea of the current
1760	time only before and after C<ev_loop> collects new events, which causes a	1971	time only before and after C<ev_run> collects new events, which causes a
1761	growing difference between C<ev_now ()> and C<ev_time ()> when handling	1972	growing difference between C<ev_now ()> and C<ev_time ()> when handling
1762	lots of events in one iteration.	1973	lots of events in one iteration.
1763		1974
1764	The relative timeouts are calculated relative to the C<ev_now ()>	1975	The relative timeouts are calculated relative to the C<ev_now ()>
1765	time. This is usually the right thing as this timestamp refers to the time	1976	time. This is usually the right thing as this timestamp refers to the time
…		…
1836	C<repeat> value), or reset the running timer to the C<repeat> value.	2047	C<repeat> value), or reset the running timer to the C<repeat> value.
1837		2048
1838	This sounds a bit complicated, see L<Be smart about timeouts>, above, for a	2049	This sounds a bit complicated, see L<Be smart about timeouts>, above, for a
1839	usage example.	2050	usage example.
1840		2051
1841	=item ev_timer_remaining (loop, ev_timer *)	2052	=item ev_tstamp ev_timer_remaining (loop, ev_timer *)
1842		2053
1843	Returns the remaining time until a timer fires. If the timer is active,	2054	Returns the remaining time until a timer fires. If the timer is active,
1844	then this time is relative to the current event loop time, otherwise it's	2055	then this time is relative to the current event loop time, otherwise it's
1845	the timeout value currently configured.	2056	the timeout value currently configured.
1846		2057
1847	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns	2058	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns
1848	C<5>. When the timer is started and one second passes, C<ev_timer_remain>	2059	C<5>. When the timer is started and one second passes, C<ev_timer_remaining>
1849	will return C<4>. When the timer expires and is restarted, it will return	2060	will return C<4>. When the timer expires and is restarted, it will return
1850	roughly C<7> (likely slightly less as callback invocation takes some time,	2061	roughly C<7> (likely slightly less as callback invocation takes some time,
1851	too), and so on.	2062	too), and so on.
1852		2063
1853	=item ev_tstamp repeat [read-write]	2064	=item ev_tstamp repeat [read-write]
…		…
1882	}	2093	}
1883		2094
1884	ev_timer mytimer;	2095	ev_timer mytimer;
1885	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */	2096	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
1886	ev_timer_again (&mytimer); /* start timer */	2097	ev_timer_again (&mytimer); /* start timer */
1887	ev_loop (loop, 0);	2098	ev_run (loop, 0);
1888		2099
1889	// and in some piece of code that gets executed on any "activity":	2100	// and in some piece of code that gets executed on any "activity":
1890	// reset the timeout to start ticking again at 10 seconds	2101	// reset the timeout to start ticking again at 10 seconds
1891	ev_timer_again (&mytimer);	2102	ev_timer_again (&mytimer);
1892		2103
…		…
1918		2129
1919	As with timers, the callback is guaranteed to be invoked only when the	2130	As with timers, the callback is guaranteed to be invoked only when the
1920	point in time where it is supposed to trigger has passed. If multiple	2131	point in time where it is supposed to trigger has passed. If multiple
1921	timers become ready during the same loop iteration then the ones with	2132	timers become ready during the same loop iteration then the ones with
1922	earlier time-out values are invoked before ones with later time-out values	2133	earlier time-out values are invoked before ones with later time-out values
1923	(but this is no longer true when a callback calls C<ev_loop> recursively).	2134	(but this is no longer true when a callback calls C<ev_run> recursively).
1924		2135
1925	=head3 Watcher-Specific Functions and Data Members	2136	=head3 Watcher-Specific Functions and Data Members
1926		2137
1927	=over 4	2138	=over 4
1928		2139
…		…
2056	Example: Call a callback every hour, or, more precisely, whenever the	2267	Example: Call a callback every hour, or, more precisely, whenever the
2057	system time is divisible by 3600. The callback invocation times have	2268	system time is divisible by 3600. The callback invocation times have
2058	potentially a lot of jitter, but good long-term stability.	2269	potentially a lot of jitter, but good long-term stability.
2059		2270
2060	static void	2271	static void
2061	clock_cb (struct ev_loop *loop, ev_io *w, int revents)	2272	clock_cb (struct ev_loop *loop, ev_periodic *w, int revents)
2062	{	2273	{
2063	... its now a full hour (UTC, or TAI or whatever your clock follows)	2274	... its now a full hour (UTC, or TAI or whatever your clock follows)
2064	}	2275	}
2065		2276
2066	ev_periodic hourly_tick;	2277	ev_periodic hourly_tick;
…		…
2089		2300
2090	=head2 C<ev_signal> - signal me when a signal gets signalled!	2301	=head2 C<ev_signal> - signal me when a signal gets signalled!
2091		2302
2092	Signal watchers will trigger an event when the process receives a specific	2303	Signal watchers will trigger an event when the process receives a specific
2093	signal one or more times. Even though signals are very asynchronous, libev	2304	signal one or more times. Even though signals are very asynchronous, libev
2094	will try it's best to deliver signals synchronously, i.e. as part of the	2305	will try its best to deliver signals synchronously, i.e. as part of the
2095	normal event processing, like any other event.	2306	normal event processing, like any other event.
2096		2307
2097	If you want signals to be delivered truly asynchronously, just use	2308	If you want signals to be delivered truly asynchronously, just use
2098	C<sigaction> as you would do without libev and forget about sharing	2309	C<sigaction> as you would do without libev and forget about sharing
2099	the signal. You can even use C<ev_async> from a signal handler to	2310	the signal. You can even use C<ev_async> from a signal handler to
…		…
2107		2318
2108	When the first watcher gets started will libev actually register something	2319	When the first watcher gets started will libev actually register something
2109	with the kernel (thus it coexists with your own signal handlers as long as	2320	with the kernel (thus it coexists with your own signal handlers as long as
2110	you don't register any with libev for the same signal).	2321	you don't register any with libev for the same signal).
2111		2322
2112	Both the signal mask state (C<sigprocmask>) and the signal handler state
2113	(C<sigaction>) are unspecified after starting a signal watcher (and after
2114	sotpping it again), that is, libev might or might not block the signal,
2115	and might or might not set or restore the installed signal handler.
2116
2117	If possible and supported, libev will install its handlers with	2323	If possible and supported, libev will install its handlers with
2118	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should	2324	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should
2119	not be unduly interrupted. If you have a problem with system calls getting	2325	not be unduly interrupted. If you have a problem with system calls getting
2120	interrupted by signals you can block all signals in an C<ev_check> watcher	2326	interrupted by signals you can block all signals in an C<ev_check> watcher
2121	and unblock them in an C<ev_prepare> watcher.	2327	and unblock them in an C<ev_prepare> watcher.
2122		2328
		2329	=head3 The special problem of inheritance over fork/execve/pthread_create
		2330
		2331	Both the signal mask (C<sigprocmask>) and the signal disposition
		2332	(C<sigaction>) are unspecified after starting a signal watcher (and after
		2333	stopping it again), that is, libev might or might not block the signal,
		2334	and might or might not set or restore the installed signal handler.
		2335
		2336	While this does not matter for the signal disposition (libev never
		2337	sets signals to C<SIG_IGN>, so handlers will be reset to C<SIG_DFL> on
		2338	C<execve>), this matters for the signal mask: many programs do not expect
		2339	certain signals to be blocked.
		2340
		2341	This means that before calling C<exec> (from the child) you should reset
		2342	the signal mask to whatever "default" you expect (all clear is a good
		2343	choice usually).
		2344
		2345	The simplest way to ensure that the signal mask is reset in the child is
		2346	to install a fork handler with C<pthread_atfork> that resets it. That will
		2347	catch fork calls done by libraries (such as the libc) as well.
		2348
		2349	In current versions of libev, the signal will not be blocked indefinitely
		2350	unless you use the C<signalfd> API (C<EV_SIGNALFD>). While this reduces
		2351	the window of opportunity for problems, it will not go away, as libev
		2352	I<has> to modify the signal mask, at least temporarily.
		2353
		2354	So I can't stress this enough: I<If you do not reset your signal mask when
		2355	you expect it to be empty, you have a race condition in your code>. This
		2356	is not a libev-specific thing, this is true for most event libraries.
		2357
		2358	=head3 The special problem of threads signal handling
		2359
		2360	POSIX threads has problematic signal handling semantics, specifically,
		2361	a lot of functionality (sigfd, sigwait etc.) only really works if all
		2362	threads in a process block signals, which is hard to achieve.
		2363
		2364	When you want to use sigwait (or mix libev signal handling with your own
		2365	for the same signals), you can tackle this problem by globally blocking
		2366	all signals before creating any threads (or creating them with a fully set
		2367	sigprocmask) and also specifying the C<EVFLAG_NOSIGMASK> when creating
		2368	loops. Then designate one thread as "signal receiver thread" which handles
		2369	these signals. You can pass on any signals that libev might be interested
		2370	in by calling C<ev_feed_signal>.
		2371
2123	=head3 Watcher-Specific Functions and Data Members	2372	=head3 Watcher-Specific Functions and Data Members
2124		2373
2125	=over 4	2374	=over 4
2126		2375
2127	=item ev_signal_init (ev_signal *, callback, int signum)	2376	=item ev_signal_init (ev_signal *, callback, int signum)
…		…
2142	Example: Try to exit cleanly on SIGINT.	2391	Example: Try to exit cleanly on SIGINT.
2143		2392
2144	static void	2393	static void
2145	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)	2394	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)
2146	{	2395	{
2147	ev_unloop (loop, EVUNLOOP_ALL);	2396	ev_break (loop, EVBREAK_ALL);
2148	}	2397	}
2149		2398
2150	ev_signal signal_watcher;	2399	ev_signal signal_watcher;
2151	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	2400	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
2152	ev_signal_start (loop, &signal_watcher);	2401	ev_signal_start (loop, &signal_watcher);
…		…
2538		2787
2539	Prepare and check watchers are usually (but not always) used in pairs:	2788	Prepare and check watchers are usually (but not always) used in pairs:
2540	prepare watchers get invoked before the process blocks and check watchers	2789	prepare watchers get invoked before the process blocks and check watchers
2541	afterwards.	2790	afterwards.
2542		2791
2543	You I<must not> call C<ev_loop> or similar functions that enter	2792	You I<must not> call C<ev_run> or similar functions that enter
2544	the current event loop from either C<ev_prepare> or C<ev_check>	2793	the current event loop from either C<ev_prepare> or C<ev_check>
2545	watchers. Other loops than the current one are fine, however. The	2794	watchers. Other loops than the current one are fine, however. The
2546	rationale behind this is that you do not need to check for recursion in	2795	rationale behind this is that you do not need to check for recursion in
2547	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,	2796	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,
2548	C<ev_check> so if you have one watcher of each kind they will always be	2797	C<ev_check> so if you have one watcher of each kind they will always be
…		…
2716		2965
2717	if (timeout >= 0)	2966	if (timeout >= 0)
2718	// create/start timer	2967	// create/start timer
2719		2968
2720	// poll	2969	// poll
2721	ev_loop (EV_A_ 0);	2970	ev_run (EV_A_ 0);
2722		2971
2723	// stop timer again	2972	// stop timer again
2724	if (timeout >= 0)	2973	if (timeout >= 0)
2725	ev_timer_stop (EV_A_ &to);	2974	ev_timer_stop (EV_A_ &to);
2726		2975
…		…
2804	if you do not want that, you need to temporarily stop the embed watcher).	3053	if you do not want that, you need to temporarily stop the embed watcher).
2805		3054
2806	=item ev_embed_sweep (loop, ev_embed *)	3055	=item ev_embed_sweep (loop, ev_embed *)
2807		3056
2808	Make a single, non-blocking sweep over the embedded loop. This works	3057	Make a single, non-blocking sweep over the embedded loop. This works
2809	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	3058	similarly to C<ev_run (embedded_loop, EVRUN_NOWAIT)>, but in the most
2810	appropriate way for embedded loops.	3059	appropriate way for embedded loops.
2811		3060
2812	=item struct ev_loop *other [read-only]	3061	=item struct ev_loop *other [read-only]
2813		3062
2814	The embedded event loop.	3063	The embedded event loop.
…		…
2874	C<ev_default_fork> cheats and calls it in the wrong process, the fork	3123	C<ev_default_fork> cheats and calls it in the wrong process, the fork
2875	handlers will be invoked, too, of course.	3124	handlers will be invoked, too, of course.
2876		3125
2877	=head3 The special problem of life after fork - how is it possible?	3126	=head3 The special problem of life after fork - how is it possible?
2878		3127
2879	Most uses of C<fork()> consist of forking, then some simple calls to ste	3128	Most uses of C<fork()> consist of forking, then some simple calls to set
2880	up/change the process environment, followed by a call to C<exec()>. This	3129	up/change the process environment, followed by a call to C<exec()>. This
2881	sequence should be handled by libev without any problems.	3130	sequence should be handled by libev without any problems.
2882		3131
2883	This changes when the application actually wants to do event handling	3132	This changes when the application actually wants to do event handling
2884	in the child, or both parent in child, in effect "continuing" after the	3133	in the child, or both parent in child, in effect "continuing" after the
…		…
2900	disadvantage of having to use multiple event loops (which do not support	3149	disadvantage of having to use multiple event loops (which do not support
2901	signal watchers).	3150	signal watchers).
2902		3151
2903	When this is not possible, or you want to use the default loop for	3152	When this is not possible, or you want to use the default loop for
2904	other reasons, then in the process that wants to start "fresh", call	3153	other reasons, then in the process that wants to start "fresh", call
2905	C<ev_default_destroy ()> followed by C<ev_default_loop (...)>. Destroying	3154	C<ev_loop_destroy (EV_DEFAULT)> followed by C<ev_default_loop (...)>.
2906	the default loop will "orphan" (not stop) all registered watchers, so you	3155	Destroying the default loop will "orphan" (not stop) all registered
2907	have to be careful not to execute code that modifies those watchers. Note	3156	watchers, so you have to be careful not to execute code that modifies
2908	also that in that case, you have to re-register any signal watchers.	3157	those watchers. Note also that in that case, you have to re-register any
		3158	signal watchers.
2909		3159
2910	=head3 Watcher-Specific Functions and Data Members	3160	=head3 Watcher-Specific Functions and Data Members
2911		3161
2912	=over 4	3162	=over 4
2913		3163
2914	=item ev_fork_init (ev_signal *, callback)	3164	=item ev_fork_init (ev_fork *, callback)
2915		3165
2916	Initialises and configures the fork watcher - it has no parameters of any	3166	Initialises and configures the fork watcher - it has no parameters of any
2917	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	3167	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
2918	believe me.	3168	really.
2919		3169
2920	=back	3170	=back
2921		3171
2922		3172
		3173	=head2 C<ev_cleanup> - even the best things end
		3174
		3175	Cleanup watchers are called just before the event loop is being destroyed
		3176	by a call to C<ev_loop_destroy>.
		3177
		3178	While there is no guarantee that the event loop gets destroyed, cleanup
		3179	watchers provide a convenient method to install cleanup hooks for your
		3180	program, worker threads and so on - you just to make sure to destroy the
		3181	loop when you want them to be invoked.
		3182
		3183	Cleanup watchers are invoked in the same way as any other watcher. Unlike
		3184	all other watchers, they do not keep a reference to the event loop (which
		3185	makes a lot of sense if you think about it). Like all other watchers, you
		3186	can call libev functions in the callback, except C<ev_cleanup_start>.
		3187
		3188	=head3 Watcher-Specific Functions and Data Members
		3189
		3190	=over 4
		3191
		3192	=item ev_cleanup_init (ev_cleanup *, callback)
		3193
		3194	Initialises and configures the cleanup watcher - it has no parameters of
		3195	any kind. There is a C<ev_cleanup_set> macro, but using it is utterly
		3196	pointless, I assure you.
		3197
		3198	=back
		3199
		3200	Example: Register an atexit handler to destroy the default loop, so any
		3201	cleanup functions are called.
		3202
		3203	static void
		3204	program_exits (void)
		3205	{
		3206	ev_loop_destroy (EV_DEFAULT_UC);
		3207	}
		3208
		3209	...
		3210	atexit (program_exits);
		3211
		3212
2923	=head2 C<ev_async> - how to wake up another event loop	3213	=head2 C<ev_async> - how to wake up an event loop
2924		3214
2925	In general, you cannot use an C<ev_loop> from multiple threads or other	3215	In general, you cannot use an C<ev_run> from multiple threads or other
2926	asynchronous sources such as signal handlers (as opposed to multiple event	3216	asynchronous sources such as signal handlers (as opposed to multiple event
2927	loops - those are of course safe to use in different threads).	3217	loops - those are of course safe to use in different threads).
2928		3218
2929	Sometimes, however, you need to wake up another event loop you do not	3219	Sometimes, however, you need to wake up an event loop you do not control,
2930	control, for example because it belongs to another thread. This is what	3220	for example because it belongs to another thread. This is what C<ev_async>
2931	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you	3221	watchers do: as long as the C<ev_async> watcher is active, you can signal
2932	can signal it by calling C<ev_async_send>, which is thread- and signal	3222	it by calling C<ev_async_send>, which is thread- and signal safe.
2933	safe.
2934		3223
2935	This functionality is very similar to C<ev_signal> watchers, as signals,	3224	This functionality is very similar to C<ev_signal> watchers, as signals,
2936	too, are asynchronous in nature, and signals, too, will be compressed	3225	too, are asynchronous in nature, and signals, too, will be compressed
2937	(i.e. the number of callback invocations may be less than the number of	3226	(i.e. the number of callback invocations may be less than the number of
2938	C<ev_async_sent> calls).	3227	C<ev_async_sent> calls). In fact, you could use signal watchers as a kind
		3228	of "global async watchers" by using a watcher on an otherwise unused
		3229	signal, and C<ev_feed_signal> to signal this watcher from another thread,
		3230	even without knowing which loop owns the signal.
2939		3231
2940	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not	3232	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not
2941	just the default loop.	3233	just the default loop.
2942		3234
2943	=head3 Queueing	3235	=head3 Queueing
2944		3236
2945	C<ev_async> does not support queueing of data in any way. The reason	3237	C<ev_async> does not support queueing of data in any way. The reason
2946	is that the author does not know of a simple (or any) algorithm for a	3238	is that the author does not know of a simple (or any) algorithm for a
2947	multiple-writer-single-reader queue that works in all cases and doesn't	3239	multiple-writer-single-reader queue that works in all cases and doesn't
2948	need elaborate support such as pthreads.	3240	need elaborate support such as pthreads or unportable memory access
		3241	semantics.
2949		3242
2950	That means that if you want to queue data, you have to provide your own	3243	That means that if you want to queue data, you have to provide your own
2951	queue. But at least I can tell you how to implement locking around your	3244	queue. But at least I can tell you how to implement locking around your
2952	queue:	3245	queue:
2953		3246
…		…
3092		3385
3093	If C<timeout> is less than 0, then no timeout watcher will be	3386	If C<timeout> is less than 0, then no timeout watcher will be
3094	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and	3387	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
3095	repeat = 0) will be started. C<0> is a valid timeout.	3388	repeat = 0) will be started. C<0> is a valid timeout.
3096		3389
3097	The callback has the type C<void (*cb)(int revents, void *arg)> and gets	3390	The callback has the type C<void (*cb)(int revents, void *arg)> and is
3098	passed an C<revents> set like normal event callbacks (a combination of	3391	passed an C<revents> set like normal event callbacks (a combination of
3099	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>	3392	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMER>) and the C<arg>
3100	value passed to C<ev_once>. Note that it is possible to receive I<both>	3393	value passed to C<ev_once>. Note that it is possible to receive I<both>
3101	a timeout and an io event at the same time - you probably should give io	3394	a timeout and an io event at the same time - you probably should give io
3102	events precedence.	3395	events precedence.
3103		3396
3104	Example: wait up to ten seconds for data to appear on STDIN_FILENO.	3397	Example: wait up to ten seconds for data to appear on STDIN_FILENO.
3105		3398
3106	static void stdin_ready (int revents, void *arg)	3399	static void stdin_ready (int revents, void *arg)
3107	{	3400	{
3108	if (revents & EV_READ)	3401	if (revents & EV_READ)
3109	/* stdin might have data for us, joy! */;	3402	/* stdin might have data for us, joy! */;
3110	else if (revents & EV_TIMEOUT)	3403	else if (revents & EV_TIMER)
3111	/* doh, nothing entered */;	3404	/* doh, nothing entered */;
3112	}	3405	}
3113		3406
3114	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	3407	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
3115		3408
3116	=item ev_feed_event (struct ev_loop *, watcher *, int revents)
3117
3118	Feeds the given event set into the event loop, as if the specified event
3119	had happened for the specified watcher (which must be a pointer to an
3120	initialised but not necessarily started event watcher).
3121
3122	=item ev_feed_fd_event (struct ev_loop *, int fd, int revents)	3409	=item ev_feed_fd_event (loop, int fd, int revents)
3123		3410
3124	Feed an event on the given fd, as if a file descriptor backend detected	3411	Feed an event on the given fd, as if a file descriptor backend detected
3125	the given events it.	3412	the given events it.
3126		3413
3127	=item ev_feed_signal_event (struct ev_loop *loop, int signum)	3414	=item ev_feed_signal_event (loop, int signum)
3128		3415
3129	Feed an event as if the given signal occurred (C<loop> must be the default	3416	Feed an event as if the given signal occurred. See also C<ev_feed_signal>,
3130	loop!).	3417	which is async-safe.
		3418
		3419	=back
		3420
		3421
		3422	=head1 COMMON OR USEFUL IDIOMS (OR BOTH)
		3423
		3424	This section explains some common idioms that are not immediately
		3425	obvious. Note that examples are sprinkled over the whole manual, and this
		3426	section only contains stuff that wouldn't fit anywhere else.
		3427
		3428	=over 4
		3429
		3430	=item Model/nested event loop invocations and exit conditions.
		3431
		3432	Often (especially in GUI toolkits) there are places where you have
		3433	I<modal> interaction, which is most easily implemented by recursively
		3434	invoking C<ev_run>.
		3435
		3436	This brings the problem of exiting - a callback might want to finish the
		3437	main C<ev_run> call, but not the nested one (e.g. user clicked "Quit", but
		3438	a modal "Are you sure?" dialog is still waiting), or just the nested one
		3439	and not the main one (e.g. user clocked "Ok" in a modal dialog), or some
		3440	other combination: In these cases, C<ev_break> will not work alone.
		3441
		3442	The solution is to maintain "break this loop" variable for each C<ev_run>
		3443	invocation, and use a loop around C<ev_run> until the condition is
		3444	triggered, using C<EVRUN_ONCE>:
		3445
		3446	// main loop
		3447	int exit_main_loop = 0;
		3448
		3449	while (!exit_main_loop)
		3450	ev_run (EV_DEFAULT_ EVRUN_ONCE);
		3451
		3452	// in a model watcher
		3453	int exit_nested_loop = 0;
		3454
		3455	while (!exit_nested_loop)
		3456	ev_run (EV_A_ EVRUN_ONCE);
		3457
		3458	To exit from any of these loops, just set the corresponding exit variable:
		3459
		3460	// exit modal loop
		3461	exit_nested_loop = 1;
		3462
		3463	// exit main program, after modal loop is finished
		3464	exit_main_loop = 1;
		3465
		3466	// exit both
		3467	exit_main_loop = exit_nested_loop = 1;
3131		3468
3132	=back	3469	=back
3133		3470
3134		3471
3135	=head1 LIBEVENT EMULATION	3472	=head1 LIBEVENT EMULATION
3136		3473
3137	Libev offers a compatibility emulation layer for libevent. It cannot	3474	Libev offers a compatibility emulation layer for libevent. It cannot
3138	emulate the internals of libevent, so here are some usage hints:	3475	emulate the internals of libevent, so here are some usage hints:
3139		3476
3140	=over 4	3477	=over 4
		3478
		3479	=item * Only the libevent-1.4.1-beta API is being emulated.
		3480
		3481	This was the newest libevent version available when libev was implemented,
		3482	and is still mostly unchanged in 2010.
3141		3483
3142	=item * Use it by including <event.h>, as usual.	3484	=item * Use it by including <event.h>, as usual.
3143		3485
3144	=item * The following members are fully supported: ev_base, ev_callback,	3486	=item * The following members are fully supported: ev_base, ev_callback,
3145	ev_arg, ev_fd, ev_res, ev_events.	3487	ev_arg, ev_fd, ev_res, ev_events.
…		…
3151	=item * Priorities are not currently supported. Initialising priorities	3493	=item * Priorities are not currently supported. Initialising priorities
3152	will fail and all watchers will have the same priority, even though there	3494	will fail and all watchers will have the same priority, even though there
3153	is an ev_pri field.	3495	is an ev_pri field.
3154		3496
3155	=item * In libevent, the last base created gets the signals, in libev, the	3497	=item * In libevent, the last base created gets the signals, in libev, the
3156	first base created (== the default loop) gets the signals.	3498	base that registered the signal gets the signals.
3157		3499
3158	=item * Other members are not supported.	3500	=item * Other members are not supported.
3159		3501
3160	=item * The libev emulation is I<not> ABI compatible to libevent, you need	3502	=item * The libev emulation is I<not> ABI compatible to libevent, you need
3161	to use the libev header file and library.	3503	to use the libev header file and library.
…		…
3180	Care has been taken to keep the overhead low. The only data member the C++	3522	Care has been taken to keep the overhead low. The only data member the C++
3181	classes add (compared to plain C-style watchers) is the event loop pointer	3523	classes add (compared to plain C-style watchers) is the event loop pointer
3182	that the watcher is associated with (or no additional members at all if	3524	that the watcher is associated with (or no additional members at all if
3183	you disable C<EV_MULTIPLICITY> when embedding libev).	3525	you disable C<EV_MULTIPLICITY> when embedding libev).
3184		3526
3185	Currently, functions, and static and non-static member functions can be	3527	Currently, functions, static and non-static member functions and classes
3186	used as callbacks. Other types should be easy to add as long as they only	3528	with C<operator ()> can be used as callbacks. Other types should be easy
3187	need one additional pointer for context. If you need support for other	3529	to add as long as they only need one additional pointer for context. If
3188	types of functors please contact the author (preferably after implementing	3530	you need support for other types of functors please contact the author
3189	it).	3531	(preferably after implementing it).
3190		3532
3191	Here is a list of things available in the C<ev> namespace:	3533	Here is a list of things available in the C<ev> namespace:
3192		3534
3193	=over 4	3535	=over 4
3194		3536
…		…
3212		3554
3213	=over 4	3555	=over 4
3214		3556
3215	=item ev::TYPE::TYPE ()	3557	=item ev::TYPE::TYPE ()
3216		3558
3217	=item ev::TYPE::TYPE (struct ev_loop *)	3559	=item ev::TYPE::TYPE (loop)
3218		3560
3219	=item ev::TYPE::~TYPE	3561	=item ev::TYPE::~TYPE
3220		3562
3221	The constructor (optionally) takes an event loop to associate the watcher	3563	The constructor (optionally) takes an event loop to associate the watcher
3222	with. If it is omitted, it will use C<EV_DEFAULT>.	3564	with. If it is omitted, it will use C<EV_DEFAULT>.
…		…
3255	myclass obj;	3597	myclass obj;
3256	ev::io iow;	3598	ev::io iow;
3257	iow.set <myclass, &myclass::io_cb> (&obj);	3599	iow.set <myclass, &myclass::io_cb> (&obj);
3258		3600
3259	=item w->set (object *)	3601	=item w->set (object *)
3260
3261	This is an B<experimental> feature that might go away in a future version.
3262		3602
3263	This is a variation of a method callback - leaving out the method to call	3603	This is a variation of a method callback - leaving out the method to call
3264	will default the method to C<operator ()>, which makes it possible to use	3604	will default the method to C<operator ()>, which makes it possible to use
3265	functor objects without having to manually specify the C<operator ()> all	3605	functor objects without having to manually specify the C<operator ()> all
3266	the time. Incidentally, you can then also leave out the template argument	3606	the time. Incidentally, you can then also leave out the template argument
…		…
3299	Example: Use a plain function as callback.	3639	Example: Use a plain function as callback.
3300		3640
3301	static void io_cb (ev::io &w, int revents) { }	3641	static void io_cb (ev::io &w, int revents) { }
3302	iow.set <io_cb> ();	3642	iow.set <io_cb> ();
3303		3643
3304	=item w->set (struct ev_loop *)	3644	=item w->set (loop)
3305		3645
3306	Associates a different C<struct ev_loop> with this watcher. You can only	3646	Associates a different C<struct ev_loop> with this watcher. You can only
3307	do this when the watcher is inactive (and not pending either).	3647	do this when the watcher is inactive (and not pending either).
3308		3648
3309	=item w->set ([arguments])	3649	=item w->set ([arguments])
3310		3650
3311	Basically the same as C<ev_TYPE_set>, with the same arguments. Must be	3651	Basically the same as C<ev_TYPE_set>, with the same arguments. Either this
3312	called at least once. Unlike the C counterpart, an active watcher gets	3652	method or a suitable start method must be called at least once. Unlike the
3313	automatically stopped and restarted when reconfiguring it with this	3653	C counterpart, an active watcher gets automatically stopped and restarted
3314	method.	3654	when reconfiguring it with this method.
3315		3655
3316	=item w->start ()	3656	=item w->start ()
3317		3657
3318	Starts the watcher. Note that there is no C<loop> argument, as the	3658	Starts the watcher. Note that there is no C<loop> argument, as the
3319	constructor already stores the event loop.	3659	constructor already stores the event loop.
3320		3660
		3661	=item w->start ([arguments])
		3662
		3663	Instead of calling C<set> and C<start> methods separately, it is often
		3664	convenient to wrap them in one call. Uses the same type of arguments as
		3665	the configure C<set> method of the watcher.
		3666
3321	=item w->stop ()	3667	=item w->stop ()
3322		3668
3323	Stops the watcher if it is active. Again, no C<loop> argument.	3669	Stops the watcher if it is active. Again, no C<loop> argument.
3324		3670
3325	=item w->again () (C<ev::timer>, C<ev::periodic> only)	3671	=item w->again () (C<ev::timer>, C<ev::periodic> only)
…		…
3337		3683
3338	=back	3684	=back
3339		3685
3340	=back	3686	=back
3341		3687
3342	Example: Define a class with an IO and idle watcher, start one of them in	3688	Example: Define a class with two I/O and idle watchers, start the I/O
3343	the constructor.	3689	watchers in the constructor.
3344		3690
3345	class myclass	3691	class myclass
3346	{	3692	{
3347	ev::io io ; void io_cb (ev::io &w, int revents);	3693	ev::io io ; void io_cb (ev::io &w, int revents);
		3694	ev::io2 io2 ; void io2_cb (ev::io &w, int revents);
3348	ev::idle idle; void idle_cb (ev::idle &w, int revents);	3695	ev::idle idle; void idle_cb (ev::idle &w, int revents);
3349		3696
3350	myclass (int fd)	3697	myclass (int fd)
3351	{	3698	{
3352	io .set <myclass, &myclass::io_cb > (this);	3699	io .set <myclass, &myclass::io_cb > (this);
		3700	io2 .set <myclass, &myclass::io2_cb > (this);
3353	idle.set <myclass, &myclass::idle_cb> (this);	3701	idle.set <myclass, &myclass::idle_cb> (this);
3354		3702
3355	io.start (fd, ev::READ);	3703	io.set (fd, ev::WRITE); // configure the watcher
		3704	io.start (); // start it whenever convenient
		3705
		3706	io2.start (fd, ev::READ); // set + start in one call
3356	}	3707	}
3357	};	3708	};
3358		3709
3359		3710
3360	=head1 OTHER LANGUAGE BINDINGS	3711	=head1 OTHER LANGUAGE BINDINGS
…		…
3406	=item Ocaml	3757	=item Ocaml
3407		3758
3408	Erkki Seppala has written Ocaml bindings for libev, to be found at	3759	Erkki Seppala has written Ocaml bindings for libev, to be found at
3409	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.	3760	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.
3410		3761
		3762	=item Lua
		3763
		3764	Brian Maher has written a partial interface to libev for lua (at the
		3765	time of this writing, only C<ev_io> and C<ev_timer>), to be found at
		3766	L<http://github.com/brimworks/lua-ev>.
		3767
3411	=back	3768	=back
3412		3769
3413		3770
3414	=head1 MACRO MAGIC	3771	=head1 MACRO MAGIC
3415		3772
…		…
3428	loop argument"). The C<EV_A> form is used when this is the sole argument,	3785	loop argument"). The C<EV_A> form is used when this is the sole argument,
3429	C<EV_A_> is used when other arguments are following. Example:	3786	C<EV_A_> is used when other arguments are following. Example:
3430		3787
3431	ev_unref (EV_A);	3788	ev_unref (EV_A);
3432	ev_timer_add (EV_A_ watcher);	3789	ev_timer_add (EV_A_ watcher);
3433	ev_loop (EV_A_ 0);	3790	ev_run (EV_A_ 0);
3434		3791
3435	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,	3792	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
3436	which is often provided by the following macro.	3793	which is often provided by the following macro.
3437		3794
3438	=item C<EV_P>, C<EV_P_>	3795	=item C<EV_P>, C<EV_P_>
…		…
3478	}	3835	}
3479		3836
3480	ev_check check;	3837	ev_check check;
3481	ev_check_init (&check, check_cb);	3838	ev_check_init (&check, check_cb);
3482	ev_check_start (EV_DEFAULT_ &check);	3839	ev_check_start (EV_DEFAULT_ &check);
3483	ev_loop (EV_DEFAULT_ 0);	3840	ev_run (EV_DEFAULT_ 0);
3484		3841
3485	=head1 EMBEDDING	3842	=head1 EMBEDDING
3486		3843
3487	Libev can (and often is) directly embedded into host	3844	Libev can (and often is) directly embedded into host
3488	applications. Examples of applications that embed it include the Deliantra	3845	applications. Examples of applications that embed it include the Deliantra
…		…
3568	libev.m4	3925	libev.m4
3569		3926
3570	=head2 PREPROCESSOR SYMBOLS/MACROS	3927	=head2 PREPROCESSOR SYMBOLS/MACROS
3571		3928
3572	Libev can be configured via a variety of preprocessor symbols you have to	3929	Libev can be configured via a variety of preprocessor symbols you have to
3573	define before including any of its files. The default in the absence of	3930	define before including (or compiling) any of its files. The default in
3574	autoconf is documented for every option.	3931	the absence of autoconf is documented for every option.
		3932
		3933	Symbols marked with "(h)" do not change the ABI, and can have different
		3934	values when compiling libev vs. including F<ev.h>, so it is permissible
		3935	to redefine them before including F<ev.h> without breaking compatibility
		3936	to a compiled library. All other symbols change the ABI, which means all
		3937	users of libev and the libev code itself must be compiled with compatible
		3938	settings.
3575		3939
3576	=over 4	3940	=over 4
3577		3941
		3942	=item EV_COMPAT3 (h)
		3943
		3944	Backwards compatibility is a major concern for libev. This is why this
		3945	release of libev comes with wrappers for the functions and symbols that
		3946	have been renamed between libev version 3 and 4.
		3947
		3948	You can disable these wrappers (to test compatibility with future
		3949	versions) by defining C<EV_COMPAT3> to C<0> when compiling your
		3950	sources. This has the additional advantage that you can drop the C<struct>
		3951	from C<struct ev_loop> declarations, as libev will provide an C<ev_loop>
		3952	typedef in that case.
		3953
		3954	In some future version, the default for C<EV_COMPAT3> will become C<0>,
		3955	and in some even more future version the compatibility code will be
		3956	removed completely.
		3957
3578	=item EV_STANDALONE	3958	=item EV_STANDALONE (h)
3579		3959
3580	Must always be C<1> if you do not use autoconf configuration, which	3960	Must always be C<1> if you do not use autoconf configuration, which
3581	keeps libev from including F<config.h>, and it also defines dummy	3961	keeps libev from including F<config.h>, and it also defines dummy
3582	implementations for some libevent functions (such as logging, which is not	3962	implementations for some libevent functions (such as logging, which is not
3583	supported). It will also not define any of the structs usually found in	3963	supported). It will also not define any of the structs usually found in
3584	F<event.h> that are not directly supported by the libev core alone.	3964	F<event.h> that are not directly supported by the libev core alone.
3585		3965
3586	In stanbdalone mode, libev will still try to automatically deduce the	3966	In standalone mode, libev will still try to automatically deduce the
3587	configuration, but has to be more conservative.	3967	configuration, but has to be more conservative.
3588		3968
3589	=item EV_USE_MONOTONIC	3969	=item EV_USE_MONOTONIC
3590		3970
3591	If defined to be C<1>, libev will try to detect the availability of the	3971	If defined to be C<1>, libev will try to detect the availability of the
…		…
3656	be used is the winsock select). This means that it will call	4036	be used is the winsock select). This means that it will call
3657	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	4037	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
3658	it is assumed that all these functions actually work on fds, even	4038	it is assumed that all these functions actually work on fds, even
3659	on win32. Should not be defined on non-win32 platforms.	4039	on win32. Should not be defined on non-win32 platforms.
3660		4040
3661	=item EV_FD_TO_WIN32_HANDLE	4041	=item EV_FD_TO_WIN32_HANDLE(fd)
3662		4042
3663	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map	4043	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
3664	file descriptors to socket handles. When not defining this symbol (the	4044	file descriptors to socket handles. When not defining this symbol (the
3665	default), then libev will call C<_get_osfhandle>, which is usually	4045	default), then libev will call C<_get_osfhandle>, which is usually
3666	correct. In some cases, programs use their own file descriptor management,	4046	correct. In some cases, programs use their own file descriptor management,
3667	in which case they can provide this function to map fds to socket handles.	4047	in which case they can provide this function to map fds to socket handles.
		4048
		4049	=item EV_WIN32_HANDLE_TO_FD(handle)
		4050
		4051	If C<EV_SELECT_IS_WINSOCKET> then libev maps handles to file descriptors
		4052	using the standard C<_open_osfhandle> function. For programs implementing
		4053	their own fd to handle mapping, overwriting this function makes it easier
		4054	to do so. This can be done by defining this macro to an appropriate value.
		4055
		4056	=item EV_WIN32_CLOSE_FD(fd)
		4057
		4058	If programs implement their own fd to handle mapping on win32, then this
		4059	macro can be used to override the C<close> function, useful to unregister
		4060	file descriptors again. Note that the replacement function has to close
		4061	the underlying OS handle.
3668		4062
3669	=item EV_USE_POLL	4063	=item EV_USE_POLL
3670		4064
3671	If defined to be C<1>, libev will compile in support for the C<poll>(2)	4065	If defined to be C<1>, libev will compile in support for the C<poll>(2)
3672	backend. Otherwise it will be enabled on non-win32 platforms. It	4066	backend. Otherwise it will be enabled on non-win32 platforms. It
…		…
3719	as well as for signal and thread safety in C<ev_async> watchers.	4113	as well as for signal and thread safety in C<ev_async> watchers.
3720		4114
3721	In the absence of this define, libev will use C<sig_atomic_t volatile>	4115	In the absence of this define, libev will use C<sig_atomic_t volatile>
3722	(from F<signal.h>), which is usually good enough on most platforms.	4116	(from F<signal.h>), which is usually good enough on most platforms.
3723		4117
3724	=item EV_H	4118	=item EV_H (h)
3725		4119
3726	The name of the F<ev.h> header file used to include it. The default if	4120	The name of the F<ev.h> header file used to include it. The default if
3727	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be	4121	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
3728	used to virtually rename the F<ev.h> header file in case of conflicts.	4122	used to virtually rename the F<ev.h> header file in case of conflicts.
3729		4123
3730	=item EV_CONFIG_H	4124	=item EV_CONFIG_H (h)
3731		4125
3732	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	4126	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
3733	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	4127	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
3734	C<EV_H>, above.	4128	C<EV_H>, above.
3735		4129
3736	=item EV_EVENT_H	4130	=item EV_EVENT_H (h)
3737		4131
3738	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	4132	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
3739	of how the F<event.h> header can be found, the default is C<"event.h">.	4133	of how the F<event.h> header can be found, the default is C<"event.h">.
3740		4134
3741	=item EV_PROTOTYPES	4135	=item EV_PROTOTYPES (h)
3742		4136
3743	If defined to be C<0>, then F<ev.h> will not define any function	4137	If defined to be C<0>, then F<ev.h> will not define any function
3744	prototypes, but still define all the structs and other symbols. This is	4138	prototypes, but still define all the structs and other symbols. This is
3745	occasionally useful if you want to provide your own wrapper functions	4139	occasionally useful if you want to provide your own wrapper functions
3746	around libev functions.	4140	around libev functions.
…		…
3768	fine.	4162	fine.
3769		4163
3770	If your embedding application does not need any priorities, defining these	4164	If your embedding application does not need any priorities, defining these
3771	both to C<0> will save some memory and CPU.	4165	both to C<0> will save some memory and CPU.
3772		4166
3773	=item EV_PERIODIC_ENABLE	4167	=item EV_PERIODIC_ENABLE, EV_IDLE_ENABLE, EV_EMBED_ENABLE, EV_STAT_ENABLE,
		4168	EV_PREPARE_ENABLE, EV_CHECK_ENABLE, EV_FORK_ENABLE, EV_SIGNAL_ENABLE,
		4169	EV_ASYNC_ENABLE, EV_CHILD_ENABLE.
3774		4170
3775	If undefined or defined to be C<1>, then periodic timers are supported. If	4171	If undefined or defined to be C<1> (and the platform supports it), then
3776	defined to be C<0>, then they are not. Disabling them saves a few kB of	4172	the respective watcher type is supported. If defined to be C<0>, then it
3777	code.	4173	is not. Disabling watcher types mainly saves code size.
3778		4174
3779	=item EV_IDLE_ENABLE	4175	=item EV_FEATURES
3780
3781	If undefined or defined to be C<1>, then idle watchers are supported. If
3782	defined to be C<0>, then they are not. Disabling them saves a few kB of
3783	code.
3784
3785	=item EV_EMBED_ENABLE
3786
3787	If undefined or defined to be C<1>, then embed watchers are supported. If
3788	defined to be C<0>, then they are not. Embed watchers rely on most other
3789	watcher types, which therefore must not be disabled.
3790
3791	=item EV_STAT_ENABLE
3792
3793	If undefined or defined to be C<1>, then stat watchers are supported. If
3794	defined to be C<0>, then they are not.
3795
3796	=item EV_FORK_ENABLE
3797
3798	If undefined or defined to be C<1>, then fork watchers are supported. If
3799	defined to be C<0>, then they are not.
3800
3801	=item EV_ASYNC_ENABLE
3802
3803	If undefined or defined to be C<1>, then async watchers are supported. If
3804	defined to be C<0>, then they are not.
3805
3806	=item EV_MINIMAL
3807		4176
3808	If you need to shave off some kilobytes of code at the expense of some	4177	If you need to shave off some kilobytes of code at the expense of some
3809	speed (but with the full API), define this symbol to C<1>. Currently this	4178	speed (but with the full API), you can define this symbol to request
3810	is used to override some inlining decisions, saves roughly 30% code size	4179	certain subsets of functionality. The default is to enable all features
3811	on amd64. It also selects a much smaller 2-heap for timer management over	4180	that can be enabled on the platform.
3812	the default 4-heap.
3813		4181
3814	You can save even more by disabling watcher types you do not need	4182	A typical way to use this symbol is to define it to C<0> (or to a bitset
3815	and setting C<EV_MAXPRI> == C<EV_MINPRI>. Also, disabling C<assert>	4183	with some broad features you want) and then selectively re-enable
3816	(C<-DNDEBUG>) will usually reduce code size a lot.	4184	additional parts you want, for example if you want everything minimal,
		4185	but multiple event loop support, async and child watchers and the poll
		4186	backend, use this:
3817		4187
3818	Defining C<EV_MINIMAL> to C<2> will additionally reduce the core API to	4188	#define EV_FEATURES 0
3819	provide a bare-bones event library. See C<ev.h> for details on what parts	4189	#define EV_MULTIPLICITY 1
3820	of the API are still available, and do not complain if this subset changes	4190	#define EV_USE_POLL 1
3821	over time.	4191	#define EV_CHILD_ENABLE 1
		4192	#define EV_ASYNC_ENABLE 1
		4193
		4194	The actual value is a bitset, it can be a combination of the following
		4195	values:
		4196
		4197	=over 4
		4198
		4199	=item C<1> - faster/larger code
		4200
		4201	Use larger code to speed up some operations.
		4202
		4203	Currently this is used to override some inlining decisions (enlarging the
		4204	code size by roughly 30% on amd64).
		4205
		4206	When optimising for size, use of compiler flags such as C<-Os> with
		4207	gcc is recommended, as well as C<-DNDEBUG>, as libev contains a number of
		4208	assertions.
		4209
		4210	=item C<2> - faster/larger data structures
		4211
		4212	Replaces the small 2-heap for timer management by a faster 4-heap, larger
		4213	hash table sizes and so on. This will usually further increase code size
		4214	and can additionally have an effect on the size of data structures at
		4215	runtime.
		4216
		4217	=item C<4> - full API configuration
		4218
		4219	This enables priorities (sets C<EV_MAXPRI>=2 and C<EV_MINPRI>=-2), and
		4220	enables multiplicity (C<EV_MULTIPLICITY>=1).
		4221
		4222	=item C<8> - full API
		4223
		4224	This enables a lot of the "lesser used" API functions. See C<ev.h> for
		4225	details on which parts of the API are still available without this
		4226	feature, and do not complain if this subset changes over time.
		4227
		4228	=item C<16> - enable all optional watcher types
		4229
		4230	Enables all optional watcher types. If you want to selectively enable
		4231	only some watcher types other than I/O and timers (e.g. prepare,
		4232	embed, async, child...) you can enable them manually by defining
		4233	C<EV_watchertype_ENABLE> to C<1> instead.
		4234
		4235	=item C<32> - enable all backends
		4236
		4237	This enables all backends - without this feature, you need to enable at
		4238	least one backend manually (C<EV_USE_SELECT> is a good choice).
		4239
		4240	=item C<64> - enable OS-specific "helper" APIs
		4241
		4242	Enable inotify, eventfd, signalfd and similar OS-specific helper APIs by
		4243	default.
		4244
		4245	=back
		4246
		4247	Compiling with C<gcc -Os -DEV_STANDALONE -DEV_USE_EPOLL=1 -DEV_FEATURES=0>
		4248	reduces the compiled size of libev from 24.7Kb code/2.8Kb data to 6.5Kb
		4249	code/0.3Kb data on my GNU/Linux amd64 system, while still giving you I/O
		4250	watchers, timers and monotonic clock support.
		4251
		4252	With an intelligent-enough linker (gcc+binutils are intelligent enough
		4253	when you use C<-Wl,--gc-sections -ffunction-sections>) functions unused by
		4254	your program might be left out as well - a binary starting a timer and an
		4255	I/O watcher then might come out at only 5Kb.
		4256
		4257	=item EV_AVOID_STDIO
		4258
		4259	If this is set to C<1> at compiletime, then libev will avoid using stdio
		4260	functions (printf, scanf, perror etc.). This will increase the code size
		4261	somewhat, but if your program doesn't otherwise depend on stdio and your
		4262	libc allows it, this avoids linking in the stdio library which is quite
		4263	big.
		4264
		4265	Note that error messages might become less precise when this option is
		4266	enabled.
3822		4267
3823	=item EV_NSIG	4268	=item EV_NSIG
3824		4269
3825	The highest supported signal number, +1 (or, the number of	4270	The highest supported signal number, +1 (or, the number of
3826	signals): Normally, libev tries to deduce the maximum number of signals	4271	signals): Normally, libev tries to deduce the maximum number of signals
3827	automatically, but sometimes this fails, in which case it can be	4272	automatically, but sometimes this fails, in which case it can be
3828	specified. Also, using a lower number than detected (C<32> should be	4273	specified. Also, using a lower number than detected (C<32> should be
3829	good for about any system in existance) can save some memory, as libev	4274	good for about any system in existence) can save some memory, as libev
3830	statically allocates some 12-24 bytes per signal number.	4275	statically allocates some 12-24 bytes per signal number.
3831		4276
3832	=item EV_PID_HASHSIZE	4277	=item EV_PID_HASHSIZE
3833		4278
3834	C<ev_child> watchers use a small hash table to distribute workload by	4279	C<ev_child> watchers use a small hash table to distribute workload by
3835	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	4280	pid. The default size is C<16> (or C<1> with C<EV_FEATURES> disabled),
3836	than enough. If you need to manage thousands of children you might want to	4281	usually more than enough. If you need to manage thousands of children you
3837	increase this value (I<must> be a power of two).	4282	might want to increase this value (I<must> be a power of two).
3838		4283
3839	=item EV_INOTIFY_HASHSIZE	4284	=item EV_INOTIFY_HASHSIZE
3840		4285
3841	C<ev_stat> watchers use a small hash table to distribute workload by	4286	C<ev_stat> watchers use a small hash table to distribute workload by
3842	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	4287	inotify watch id. The default size is C<16> (or C<1> with C<EV_FEATURES>
3843	usually more than enough. If you need to manage thousands of C<ev_stat>	4288	disabled), usually more than enough. If you need to manage thousands of
3844	watchers you might want to increase this value (I<must> be a power of	4289	C<ev_stat> watchers you might want to increase this value (I<must> be a
3845	two).	4290	power of two).
3846		4291
3847	=item EV_USE_4HEAP	4292	=item EV_USE_4HEAP
3848		4293
3849	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4294	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3850	timer and periodics heaps, libev uses a 4-heap when this symbol is defined	4295	timer and periodics heaps, libev uses a 4-heap when this symbol is defined
3851	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably	4296	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably
3852	faster performance with many (thousands) of watchers.	4297	faster performance with many (thousands) of watchers.
3853		4298
3854	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4299	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3855	(disabled).	4300	will be C<0>.
3856		4301
3857	=item EV_HEAP_CACHE_AT	4302	=item EV_HEAP_CACHE_AT
3858		4303
3859	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4304	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3860	timer and periodics heaps, libev can cache the timestamp (I<at>) within	4305	timer and periodics heaps, libev can cache the timestamp (I<at>) within
3861	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),	4306	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
3862	which uses 8-12 bytes more per watcher and a few hundred bytes more code,	4307	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
3863	but avoids random read accesses on heap changes. This improves performance	4308	but avoids random read accesses on heap changes. This improves performance
3864	noticeably with many (hundreds) of watchers.	4309	noticeably with many (hundreds) of watchers.
3865		4310
3866	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4311	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3867	(disabled).	4312	will be C<0>.
3868		4313
3869	=item EV_VERIFY	4314	=item EV_VERIFY
3870		4315
3871	Controls how much internal verification (see C<ev_loop_verify ()>) will	4316	Controls how much internal verification (see C<ev_verify ()>) will
3872	be done: If set to C<0>, no internal verification code will be compiled	4317	be done: If set to C<0>, no internal verification code will be compiled
3873	in. If set to C<1>, then verification code will be compiled in, but not	4318	in. If set to C<1>, then verification code will be compiled in, but not
3874	called. If set to C<2>, then the internal verification code will be	4319	called. If set to C<2>, then the internal verification code will be
3875	called once per loop, which can slow down libev. If set to C<3>, then the	4320	called once per loop, which can slow down libev. If set to C<3>, then the
3876	verification code will be called very frequently, which will slow down	4321	verification code will be called very frequently, which will slow down
3877	libev considerably.	4322	libev considerably.
3878		4323
3879	The default is C<1>, unless C<EV_MINIMAL> is set, in which case it will be	4324	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3880	C<0>.	4325	will be C<0>.
3881		4326
3882	=item EV_COMMON	4327	=item EV_COMMON
3883		4328
3884	By default, all watchers have a C<void *data> member. By redefining	4329	By default, all watchers have a C<void *data> member. By redefining
3885	this macro to a something else you can include more and other types of	4330	this macro to something else you can include more and other types of
3886	members. You have to define it each time you include one of the files,	4331	members. You have to define it each time you include one of the files,
3887	though, and it must be identical each time.	4332	though, and it must be identical each time.
3888		4333
3889	For example, the perl EV module uses something like this:	4334	For example, the perl EV module uses something like this:
3890		4335
…		…
3943	file.	4388	file.
3944		4389
3945	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	4390	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
3946	that everybody includes and which overrides some configure choices:	4391	that everybody includes and which overrides some configure choices:
3947		4392
3948	#define EV_MINIMAL 1	4393	#define EV_FEATURES 8
3949	#define EV_USE_POLL 0	4394	#define EV_USE_SELECT 1
3950	#define EV_MULTIPLICITY 0
3951	#define EV_PERIODIC_ENABLE 0	4395	#define EV_PREPARE_ENABLE 1
		4396	#define EV_IDLE_ENABLE 1
3952	#define EV_STAT_ENABLE 0	4397	#define EV_SIGNAL_ENABLE 1
3953	#define EV_FORK_ENABLE 0	4398	#define EV_CHILD_ENABLE 1
		4399	#define EV_USE_STDEXCEPT 0
3954	#define EV_CONFIG_H <config.h>	4400	#define EV_CONFIG_H <config.h>
3955	#define EV_MINPRI 0
3956	#define EV_MAXPRI 0
3957		4401
3958	#include "ev++.h"	4402	#include "ev++.h"
3959		4403
3960	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	4404	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
3961		4405
…		…
4092	userdata *u = ev_userdata (EV_A);	4536	userdata *u = ev_userdata (EV_A);
4093	pthread_mutex_lock (&u->lock);	4537	pthread_mutex_lock (&u->lock);
4094	}	4538	}
4095		4539
4096	The event loop thread first acquires the mutex, and then jumps straight	4540	The event loop thread first acquires the mutex, and then jumps straight
4097	into C<ev_loop>:	4541	into C<ev_run>:
4098		4542
4099	void *	4543	void *
4100	l_run (void *thr_arg)	4544	l_run (void *thr_arg)
4101	{	4545	{
4102	struct ev_loop *loop = (struct ev_loop *)thr_arg;	4546	struct ev_loop *loop = (struct ev_loop *)thr_arg;
4103		4547
4104	l_acquire (EV_A);	4548	l_acquire (EV_A);
4105	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);	4549	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
4106	ev_loop (EV_A_ 0);	4550	ev_run (EV_A_ 0);
4107	l_release (EV_A);	4551	l_release (EV_A);
4108		4552
4109	return 0;	4553	return 0;
4110	}	4554	}
4111		4555
…		…
4163		4607
4164	=head3 COROUTINES	4608	=head3 COROUTINES
4165		4609
4166	Libev is very accommodating to coroutines ("cooperative threads"):	4610	Libev is very accommodating to coroutines ("cooperative threads"):
4167	libev fully supports nesting calls to its functions from different	4611	libev fully supports nesting calls to its functions from different
4168	coroutines (e.g. you can call C<ev_loop> on the same loop from two	4612	coroutines (e.g. you can call C<ev_run> on the same loop from two
4169	different coroutines, and switch freely between both coroutines running	4613	different coroutines, and switch freely between both coroutines running
4170	the loop, as long as you don't confuse yourself). The only exception is	4614	the loop, as long as you don't confuse yourself). The only exception is
4171	that you must not do this from C<ev_periodic> reschedule callbacks.	4615	that you must not do this from C<ev_periodic> reschedule callbacks.
4172		4616
4173	Care has been taken to ensure that libev does not keep local state inside	4617	Care has been taken to ensure that libev does not keep local state inside
4174	C<ev_loop>, and other calls do not usually allow for coroutine switches as	4618	C<ev_run>, and other calls do not usually allow for coroutine switches as
4175	they do not call any callbacks.	4619	they do not call any callbacks.
4176		4620
4177	=head2 COMPILER WARNINGS	4621	=head2 COMPILER WARNINGS
4178		4622
4179	Depending on your compiler and compiler settings, you might get no or a	4623	Depending on your compiler and compiler settings, you might get no or a
…		…
4190	maintainable.	4634	maintainable.
4191		4635
4192	And of course, some compiler warnings are just plain stupid, or simply	4636	And of course, some compiler warnings are just plain stupid, or simply
4193	wrong (because they don't actually warn about the condition their message	4637	wrong (because they don't actually warn about the condition their message
4194	seems to warn about). For example, certain older gcc versions had some	4638	seems to warn about). For example, certain older gcc versions had some
4195	warnings that resulted an extreme number of false positives. These have	4639	warnings that resulted in an extreme number of false positives. These have
4196	been fixed, but some people still insist on making code warn-free with	4640	been fixed, but some people still insist on making code warn-free with
4197	such buggy versions.	4641	such buggy versions.
4198		4642
4199	While libev is written to generate as few warnings as possible,	4643	While libev is written to generate as few warnings as possible,
4200	"warn-free" code is not a goal, and it is recommended not to build libev	4644	"warn-free" code is not a goal, and it is recommended not to build libev
…		…
4236	I suggest using suppression lists.	4680	I suggest using suppression lists.
4237		4681
4238		4682
4239	=head1 PORTABILITY NOTES	4683	=head1 PORTABILITY NOTES
4240		4684
		4685	=head2 GNU/LINUX 32 BIT LIMITATIONS
		4686
		4687	GNU/Linux is the only common platform that supports 64 bit file/large file
		4688	interfaces but I<disables> them by default.
		4689
		4690	That means that libev compiled in the default environment doesn't support
		4691	files larger than 2GiB or so, which mainly affects C<ev_stat> watchers.
		4692
		4693	Unfortunately, many programs try to work around this GNU/Linux issue
		4694	by enabling the large file API, which makes them incompatible with the
		4695	standard libev compiled for their system.
		4696
		4697	Likewise, libev cannot enable the large file API itself as this would
		4698	suddenly make it incompatible to the default compile time environment,
		4699	i.e. all programs not using special compile switches.
		4700
		4701	=head2 OS/X AND DARWIN BUGS
		4702
		4703	The whole thing is a bug if you ask me - basically any system interface
		4704	you touch is broken, whether it is locales, poll, kqueue or even the
		4705	OpenGL drivers.
		4706
		4707	=head3 C<kqueue> is buggy
		4708
		4709	The kqueue syscall is broken in all known versions - most versions support
		4710	only sockets, many support pipes.
		4711
		4712	Libev tries to work around this by not using C<kqueue> by default on this
		4713	rotten platform, but of course you can still ask for it when creating a
		4714	loop - embedding a socket-only kqueue loop into a select-based one is
		4715	probably going to work well.
		4716
		4717	=head3 C<poll> is buggy
		4718
		4719	Instead of fixing C<kqueue>, Apple replaced their (working) C<poll>
		4720	implementation by something calling C<kqueue> internally around the 10.5.6
		4721	release, so now C<kqueue> I<and> C<poll> are broken.
		4722
		4723	Libev tries to work around this by not using C<poll> by default on
		4724	this rotten platform, but of course you can still ask for it when creating
		4725	a loop.
		4726
		4727	=head3 C<select> is buggy
		4728
		4729	All that's left is C<select>, and of course Apple found a way to fuck this
		4730	one up as well: On OS/X, C<select> actively limits the number of file
		4731	descriptors you can pass in to 1024 - your program suddenly crashes when
		4732	you use more.
		4733
		4734	There is an undocumented "workaround" for this - defining
		4735	C<_DARWIN_UNLIMITED_SELECT>, which libev tries to use, so select I<should>
		4736	work on OS/X.
		4737
		4738	=head2 SOLARIS PROBLEMS AND WORKAROUNDS
		4739
		4740	=head3 C<errno> reentrancy
		4741
		4742	The default compile environment on Solaris is unfortunately so
		4743	thread-unsafe that you can't even use components/libraries compiled
		4744	without C<-D_REENTRANT> in a threaded program, which, of course, isn't
		4745	defined by default. A valid, if stupid, implementation choice.
		4746
		4747	If you want to use libev in threaded environments you have to make sure
		4748	it's compiled with C<_REENTRANT> defined.
		4749
		4750	=head3 Event port backend
		4751
		4752	The scalable event interface for Solaris is called "event
		4753	ports". Unfortunately, this mechanism is very buggy in all major
		4754	releases. If you run into high CPU usage, your program freezes or you get
		4755	a large number of spurious wakeups, make sure you have all the relevant
		4756	and latest kernel patches applied. No, I don't know which ones, but there
		4757	are multiple ones to apply, and afterwards, event ports actually work
		4758	great.
		4759
		4760	If you can't get it to work, you can try running the program by setting
		4761	the environment variable C<LIBEV_FLAGS=3> to only allow C<poll> and
		4762	C<select> backends.
		4763
		4764	=head2 AIX POLL BUG
		4765
		4766	AIX unfortunately has a broken C<poll.h> header. Libev works around
		4767	this by trying to avoid the poll backend altogether (i.e. it's not even
		4768	compiled in), which normally isn't a big problem as C<select> works fine
		4769	with large bitsets on AIX, and AIX is dead anyway.
		4770
4241	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS	4771	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
		4772
		4773	=head3 General issues
4242		4774
4243	Win32 doesn't support any of the standards (e.g. POSIX) that libev	4775	Win32 doesn't support any of the standards (e.g. POSIX) that libev
4244	requires, and its I/O model is fundamentally incompatible with the POSIX	4776	requires, and its I/O model is fundamentally incompatible with the POSIX
4245	model. Libev still offers limited functionality on this platform in	4777	model. Libev still offers limited functionality on this platform in
4246	the form of the C<EVBACKEND_SELECT> backend, and only supports socket	4778	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
4247	descriptors. This only applies when using Win32 natively, not when using	4779	descriptors. This only applies when using Win32 natively, not when using
4248	e.g. cygwin.	4780	e.g. cygwin. Actually, it only applies to the microsofts own compilers,
		4781	as every compielr comes with a slightly differently broken/incompatible
		4782	environment.
4249		4783
4250	Lifting these limitations would basically require the full	4784	Lifting these limitations would basically require the full
4251	re-implementation of the I/O system. If you are into these kinds of	4785	re-implementation of the I/O system. If you are into this kind of thing,
4252	things, then note that glib does exactly that for you in a very portable	4786	then note that glib does exactly that for you in a very portable way (note
4253	way (note also that glib is the slowest event library known to man).	4787	also that glib is the slowest event library known to man).
4254		4788
4255	There is no supported compilation method available on windows except	4789	There is no supported compilation method available on windows except
4256	embedding it into other applications.	4790	embedding it into other applications.
4257		4791
4258	Sensible signal handling is officially unsupported by Microsoft - libev	4792	Sensible signal handling is officially unsupported by Microsoft - libev
…		…
4286	you do I<not> compile the F<ev.c> or any other embedded source files!):	4820	you do I<not> compile the F<ev.c> or any other embedded source files!):
4287		4821
4288	#include "evwrap.h"	4822	#include "evwrap.h"
4289	#include "ev.c"	4823	#include "ev.c"
4290		4824
4291	=over 4
4292
4293	=item The winsocket select function	4825	=head3 The winsocket C<select> function
4294		4826
4295	The winsocket C<select> function doesn't follow POSIX in that it	4827	The winsocket C<select> function doesn't follow POSIX in that it
4296	requires socket I<handles> and not socket I<file descriptors> (it is	4828	requires socket I<handles> and not socket I<file descriptors> (it is
4297	also extremely buggy). This makes select very inefficient, and also	4829	also extremely buggy). This makes select very inefficient, and also
4298	requires a mapping from file descriptors to socket handles (the Microsoft	4830	requires a mapping from file descriptors to socket handles (the Microsoft
…		…
4307	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */	4839	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
4308		4840
4309	Note that winsockets handling of fd sets is O(n), so you can easily get a	4841	Note that winsockets handling of fd sets is O(n), so you can easily get a
4310	complexity in the O(n²) range when using win32.	4842	complexity in the O(n²) range when using win32.
4311		4843
4312	=item Limited number of file descriptors	4844	=head3 Limited number of file descriptors
4313		4845
4314	Windows has numerous arbitrary (and low) limits on things.	4846	Windows has numerous arbitrary (and low) limits on things.
4315		4847
4316	Early versions of winsocket's select only supported waiting for a maximum	4848	Early versions of winsocket's select only supported waiting for a maximum
4317	of C<64> handles (probably owning to the fact that all windows kernels	4849	of C<64> handles (probably owning to the fact that all windows kernels
…		…
4332	runtime libraries. This might get you to about C<512> or C<2048> sockets	4864	runtime libraries. This might get you to about C<512> or C<2048> sockets
4333	(depending on windows version and/or the phase of the moon). To get more,	4865	(depending on windows version and/or the phase of the moon). To get more,
4334	you need to wrap all I/O functions and provide your own fd management, but	4866	you need to wrap all I/O functions and provide your own fd management, but
4335	the cost of calling select (O(n²)) will likely make this unworkable.	4867	the cost of calling select (O(n²)) will likely make this unworkable.
4336		4868
4337	=back
4338
4339	=head2 PORTABILITY REQUIREMENTS	4869	=head2 PORTABILITY REQUIREMENTS
4340		4870
4341	In addition to a working ISO-C implementation and of course the	4871	In addition to a working ISO-C implementation and of course the
4342	backend-specific APIs, libev relies on a few additional extensions:	4872	backend-specific APIs, libev relies on a few additional extensions:
4343		4873
…		…
4349	Libev assumes not only that all watcher pointers have the same internal	4879	Libev assumes not only that all watcher pointers have the same internal
4350	structure (guaranteed by POSIX but not by ISO C for example), but it also	4880	structure (guaranteed by POSIX but not by ISO C for example), but it also
4351	assumes that the same (machine) code can be used to call any watcher	4881	assumes that the same (machine) code can be used to call any watcher
4352	callback: The watcher callbacks have different type signatures, but libev	4882	callback: The watcher callbacks have different type signatures, but libev
4353	calls them using an C<ev_watcher *> internally.	4883	calls them using an C<ev_watcher *> internally.
		4884
		4885	=item pointer accesses must be thread-atomic
		4886
		4887	Accessing a pointer value must be atomic, it must both be readable and
		4888	writable in one piece - this is the case on all current architectures.
4354		4889
4355	=item C<sig_atomic_t volatile> must be thread-atomic as well	4890	=item C<sig_atomic_t volatile> must be thread-atomic as well
4356		4891
4357	The type C<sig_atomic_t volatile> (or whatever is defined as	4892	The type C<sig_atomic_t volatile> (or whatever is defined as
4358	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different	4893	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different
…		…
4381	watchers.	4916	watchers.
4382		4917
4383	=item C<double> must hold a time value in seconds with enough accuracy	4918	=item C<double> must hold a time value in seconds with enough accuracy
4384		4919
4385	The type C<double> is used to represent timestamps. It is required to	4920	The type C<double> is used to represent timestamps. It is required to
4386	have at least 51 bits of mantissa (and 9 bits of exponent), which is good	4921	have at least 51 bits of mantissa (and 9 bits of exponent), which is
4387	enough for at least into the year 4000. This requirement is fulfilled by	4922	good enough for at least into the year 4000 with millisecond accuracy
		4923	(the design goal for libev). This requirement is overfulfilled by
4388	implementations implementing IEEE 754, which is basically all existing	4924	implementations using IEEE 754, which is basically all existing ones. With
4389	ones. With IEEE 754 doubles, you get microsecond accuracy until at least	4925	IEEE 754 doubles, you get microsecond accuracy until at least 2200.
4390	2200.
4391		4926
4392	=back	4927	=back
4393		4928
4394	If you know of other additional requirements drop me a note.	4929	If you know of other additional requirements drop me a note.
4395		4930
…		…
4463	involves iterating over all running async watchers or all signal numbers.	4998	involves iterating over all running async watchers or all signal numbers.
4464		4999
4465	=back	5000	=back
4466		5001
4467		5002
		5003	=head1 PORTING FROM LIBEV 3.X TO 4.X
		5004
		5005	The major version 4 introduced some incompatible changes to the API.
		5006
		5007	At the moment, the C<ev.h> header file provides compatibility definitions
		5008	for all changes, so most programs should still compile. The compatibility
		5009	layer might be removed in later versions of libev, so better update to the
		5010	new API early than late.
		5011
		5012	=over 4
		5013
		5014	=item C<EV_COMPAT3> backwards compatibility mechanism
		5015
		5016	The backward compatibility mechanism can be controlled by
		5017	C<EV_COMPAT3>. See L<PREPROCESSOR SYMBOLS/MACROS> in the L<EMBEDDING>
		5018	section.
		5019
		5020	=item C<ev_default_destroy> and C<ev_default_fork> have been removed
		5021
		5022	These calls can be replaced easily by their C<ev_loop_xxx> counterparts:
		5023
		5024	ev_loop_destroy (EV_DEFAULT_UC);
		5025	ev_loop_fork (EV_DEFAULT);
		5026
		5027	=item function/symbol renames
		5028
		5029	A number of functions and symbols have been renamed:
		5030
		5031	ev_loop => ev_run
		5032	EVLOOP_NONBLOCK => EVRUN_NOWAIT
		5033	EVLOOP_ONESHOT => EVRUN_ONCE
		5034
		5035	ev_unloop => ev_break
		5036	EVUNLOOP_CANCEL => EVBREAK_CANCEL
		5037	EVUNLOOP_ONE => EVBREAK_ONE
		5038	EVUNLOOP_ALL => EVBREAK_ALL
		5039
		5040	EV_TIMEOUT => EV_TIMER
		5041
		5042	ev_loop_count => ev_iteration
		5043	ev_loop_depth => ev_depth
		5044	ev_loop_verify => ev_verify
		5045
		5046	Most functions working on C<struct ev_loop> objects don't have an
		5047	C<ev_loop_> prefix, so it was removed; C<ev_loop>, C<ev_unloop> and
		5048	associated constants have been renamed to not collide with the C<struct
		5049	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme
		5050	as all other watcher types. Note that C<ev_loop_fork> is still called
		5051	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>
		5052	typedef.
		5053
		5054	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>
		5055
		5056	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different
		5057	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile
		5058	and work, but the library code will of course be larger.
		5059
		5060	=back
		5061
		5062
4468	=head1 GLOSSARY	5063	=head1 GLOSSARY
4469		5064
4470	=over 4	5065	=over 4
4471		5066
4472	=item active	5067	=item active
4473		5068
4474	A watcher is active as long as it has been started (has been attached to	5069	A watcher is active as long as it has been started and not yet stopped.
4475	an event loop) but not yet stopped (disassociated from the event loop).	5070	See L<WATCHER STATES> for details.
4476		5071
4477	=item application	5072	=item application
4478		5073
4479	In this document, an application is whatever is using libev.	5074	In this document, an application is whatever is using libev.
		5075
		5076	=item backend
		5077
		5078	The part of the code dealing with the operating system interfaces.
4480		5079
4481	=item callback	5080	=item callback
4482		5081
4483	The address of a function that is called when some event has been	5082	The address of a function that is called when some event has been
4484	detected. Callbacks are being passed the event loop, the watcher that	5083	detected. Callbacks are being passed the event loop, the watcher that
4485	received the event, and the actual event bitset.	5084	received the event, and the actual event bitset.
4486		5085
4487	=item callback invocation	5086	=item callback/watcher invocation
4488		5087
4489	The act of calling the callback associated with a watcher.	5088	The act of calling the callback associated with a watcher.
4490		5089
4491	=item event	5090	=item event
4492		5091
4493	A change of state of some external event, such as data now being available	5092	A change of state of some external event, such as data now being available
4494	for reading on a file descriptor, time having passed or simply not having	5093	for reading on a file descriptor, time having passed or simply not having
4495	any other events happening anymore.	5094	any other events happening anymore.
4496		5095
4497	In libev, events are represented as single bits (such as C<EV_READ> or	5096	In libev, events are represented as single bits (such as C<EV_READ> or
4498	C<EV_TIMEOUT>).	5097	C<EV_TIMER>).
4499		5098
4500	=item event library	5099	=item event library
4501		5100
4502	A software package implementing an event model and loop.	5101	A software package implementing an event model and loop.
4503		5102
…		…
4511	The model used to describe how an event loop handles and processes	5110	The model used to describe how an event loop handles and processes
4512	watchers and events.	5111	watchers and events.
4513		5112
4514	=item pending	5113	=item pending
4515		5114
4516	A watcher is pending as soon as the corresponding event has been detected,	5115	A watcher is pending as soon as the corresponding event has been
4517	and stops being pending as soon as the watcher will be invoked or its	5116	detected. See L<WATCHER STATES> for details.
4518	pending status is explicitly cleared by the application.
4519
4520	A watcher can be pending, but not active. Stopping a watcher also clears
4521	its pending status.
4522		5117
4523	=item real time	5118	=item real time
4524		5119
4525	The physical time that is observed. It is apparently strictly monotonic :)	5120	The physical time that is observed. It is apparently strictly monotonic :)
4526		5121
…		…
4533	=item watcher	5128	=item watcher
4534		5129
4535	A data structure that describes interest in certain events. Watchers need	5130	A data structure that describes interest in certain events. Watchers need
4536	to be started (attached to an event loop) before they can receive events.	5131	to be started (attached to an event loop) before they can receive events.
4537		5132
4538	=item watcher invocation
4539
4540	The act of calling the callback associated with a watcher.
4541
4542	=back	5133	=back
4543		5134
4544	=head1 AUTHOR	5135	=head1 AUTHOR
4545		5136
4546	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael Magnusson.	5137	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael
		5138	Magnusson and Emanuele Giaquinta.
4547		5139

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines