ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.264 by root, Wed Aug 19 23:44:51 2009 UTC vs.
Revision 1.458 by root, Fri Dec 20 20:51:46 2019 UTC

		1	=encoding utf-8
		2
1	=head1 NAME	3	=head1 NAME
2		4
3	libev - a high performance full-featured event loop written in C	5	libev - a high performance full-featured event loop written in C
4		6
5	=head1 SYNOPSIS	7	=head1 SYNOPSIS
…		…
26	puts ("stdin ready");	28	puts ("stdin ready");
27	// for one-shot events, one must manually stop the watcher	29	// for one-shot events, one must manually stop the watcher
28	// with its corresponding stop function.	30	// with its corresponding stop function.
29	ev_io_stop (EV_A_ w);	31	ev_io_stop (EV_A_ w);
30		32
31	// this causes all nested ev_loop's to stop iterating	33	// this causes all nested ev_run's to stop iterating
32	ev_unloop (EV_A_ EVUNLOOP_ALL);	34	ev_break (EV_A_ EVBREAK_ALL);
33	}	35	}
34		36
35	// another callback, this time for a time-out	37	// another callback, this time for a time-out
36	static void	38	static void
37	timeout_cb (EV_P_ ev_timer *w, int revents)	39	timeout_cb (EV_P_ ev_timer *w, int revents)
38	{	40	{
39	puts ("timeout");	41	puts ("timeout");
40	// this causes the innermost ev_loop to stop iterating	42	// this causes the innermost ev_run to stop iterating
41	ev_unloop (EV_A_ EVUNLOOP_ONE);	43	ev_break (EV_A_ EVBREAK_ONE);
42	}	44	}
43		45
44	int	46	int
45	main (void)	47	main (void)
46	{	48	{
47	// use the default event loop unless you have special needs	49	// use the default event loop unless you have special needs
48	struct ev_loop *loop = ev_default_loop (0);	50	struct ev_loop *loop = EV_DEFAULT;
49		51
50	// initialise an io watcher, then start it	52	// initialise an io watcher, then start it
51	// this one will watch for stdin to become readable	53	// this one will watch for stdin to become readable
52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	54	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
53	ev_io_start (loop, &stdin_watcher);	55	ev_io_start (loop, &stdin_watcher);
…		…
56	// simple non-repeating 5.5 second timeout	58	// simple non-repeating 5.5 second timeout
57	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	59	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
58	ev_timer_start (loop, &timeout_watcher);	60	ev_timer_start (loop, &timeout_watcher);
59		61
60	// now wait for events to arrive	62	// now wait for events to arrive
61	ev_loop (loop, 0);	63	ev_run (loop, 0);
62		64
63	// unloop was called, so exit	65	// break was called, so exit
64	return 0;	66	return 0;
65	}	67	}
66		68
67	=head1 ABOUT THIS DOCUMENT	69	=head1 ABOUT THIS DOCUMENT
68		70
…		…
75	While this document tries to be as complete as possible in documenting	77	While this document tries to be as complete as possible in documenting
76	libev, its usage and the rationale behind its design, it is not a tutorial	78	libev, its usage and the rationale behind its design, it is not a tutorial
77	on event-based programming, nor will it introduce event-based programming	79	on event-based programming, nor will it introduce event-based programming
78	with libev.	80	with libev.
79		81
80	Familarity with event based programming techniques in general is assumed	82	Familiarity with event based programming techniques in general is assumed
81	throughout this document.	83	throughout this document.
		84
		85	=head1 WHAT TO READ WHEN IN A HURRY
		86
		87	This manual tries to be very detailed, but unfortunately, this also makes
		88	it very long. If you just want to know the basics of libev, I suggest
		89	reading L</ANATOMY OF A WATCHER>, then the L</EXAMPLE PROGRAM> above and
		90	look up the missing functions in L</GLOBAL FUNCTIONS> and the C<ev_io> and
		91	C<ev_timer> sections in L</WATCHER TYPES>.
82		92
83	=head1 ABOUT LIBEV	93	=head1 ABOUT LIBEV
84		94
85	Libev is an event loop: you register interest in certain events (such as a	95	Libev is an event loop: you register interest in certain events (such as a
86	file descriptor being readable or a timeout occurring), and it will manage	96	file descriptor being readable or a timeout occurring), and it will manage
…		…
95	details of the event, and then hand it over to libev by I<starting> the	105	details of the event, and then hand it over to libev by I<starting> the
96	watcher.	106	watcher.
97		107
98	=head2 FEATURES	108	=head2 FEATURES
99		109
100	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	110	Libev supports C<select>, C<poll>, the Linux-specific aio and C<epoll>
101	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	111	interfaces, the BSD-specific C<kqueue> and the Solaris-specific event port
102	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	112	mechanisms for file descriptor events (C<ev_io>), the Linux C<inotify>
103	(for C<ev_stat>), Linux eventfd/signalfd (for faster and cleaner	113	interface (for C<ev_stat>), Linux eventfd/signalfd (for faster and cleaner
104	inter-thread wakeup (C<ev_async>)/signal handling (C<ev_signal>)) relative	114	inter-thread wakeup (C<ev_async>)/signal handling (C<ev_signal>)) relative
105	timers (C<ev_timer>), absolute timers with customised rescheduling	115	timers (C<ev_timer>), absolute timers with customised rescheduling
106	(C<ev_periodic>), synchronous signals (C<ev_signal>), process status	116	(C<ev_periodic>), synchronous signals (C<ev_signal>), process status
107	change events (C<ev_child>), and event watchers dealing with the event	117	change events (C<ev_child>), and event watchers dealing with the event
108	loop mechanism itself (C<ev_idle>, C<ev_embed>, C<ev_prepare> and	118	loop mechanism itself (C<ev_idle>, C<ev_embed>, C<ev_prepare> and
…		…
118	Libev is very configurable. In this manual the default (and most common)	128	Libev is very configurable. In this manual the default (and most common)
119	configuration will be described, which supports multiple event loops. For	129	configuration will be described, which supports multiple event loops. For
120	more info about various configuration options please have a look at	130	more info about various configuration options please have a look at
121	B<EMBED> section in this manual. If libev was configured without support	131	B<EMBED> section in this manual. If libev was configured without support
122	for multiple event loops, then all functions taking an initial argument of	132	for multiple event loops, then all functions taking an initial argument of
123	name C<loop> (which is always of type C<ev_loop *>) will not have	133	name C<loop> (which is always of type C<struct ev_loop *>) will not have
124	this argument.	134	this argument.
125		135
126	=head2 TIME REPRESENTATION	136	=head2 TIME REPRESENTATION
127		137
128	Libev represents time as a single floating point number, representing	138	Libev represents time as a single floating point number, representing
129	the (fractional) number of seconds since the (POSIX) epoch (somewhere	139	the (fractional) number of seconds since the (POSIX) epoch (in practice
130	near the beginning of 1970, details are complicated, don't ask). This	140	somewhere near the beginning of 1970, details are complicated, don't
131	type is called C<ev_tstamp>, which is what you should use too. It usually	141	ask). This type is called C<ev_tstamp>, which is what you should use
132	aliases to the C<double> type in C. When you need to do any calculations	142	too. It usually aliases to the C<double> type in C. When you need to do
133	on it, you should treat it as some floating point value. Unlike the name	143	any calculations on it, you should treat it as some floating point value.
		144
134	component C<stamp> might indicate, it is also used for time differences	145	Unlike the name component C<stamp> might indicate, it is also used for
135	throughout libev.	146	time differences (e.g. delays) throughout libev.
136		147
137	=head1 ERROR HANDLING	148	=head1 ERROR HANDLING
138		149
139	Libev knows three classes of errors: operating system errors, usage errors	150	Libev knows three classes of errors: operating system errors, usage errors
140	and internal errors (bugs).	151	and internal errors (bugs).
…		…
148	When libev detects a usage error such as a negative timer interval, then	159	When libev detects a usage error such as a negative timer interval, then
149	it will print a diagnostic message and abort (via the C<assert> mechanism,	160	it will print a diagnostic message and abort (via the C<assert> mechanism,
150	so C<NDEBUG> will disable this checking): these are programming errors in	161	so C<NDEBUG> will disable this checking): these are programming errors in
151	the libev caller and need to be fixed there.	162	the libev caller and need to be fixed there.
152		163
		164	Via the C<EV_FREQUENT> macro you can compile in and/or enable extensive
		165	consistency checking code inside libev that can be used to check for
		166	internal inconsistencies, suually caused by application bugs.
		167
153	Libev also has a few internal error-checking C<assert>ions, and also has	168	Libev also has a few internal error-checking C<assert>ions. These do not
154	extensive consistency checking code. These do not trigger under normal
155	circumstances, as they indicate either a bug in libev or worse.	169	trigger under normal circumstances, as they indicate either a bug in libev
		170	or worse.
156		171
157		172
158	=head1 GLOBAL FUNCTIONS	173	=head1 GLOBAL FUNCTIONS
159		174
160	These functions can be called anytime, even before initialising the	175	These functions can be called anytime, even before initialising the
…		…
164		179
165	=item ev_tstamp ev_time ()	180	=item ev_tstamp ev_time ()
166		181
167	Returns the current time as libev would use it. Please note that the	182	Returns the current time as libev would use it. Please note that the
168	C<ev_now> function is usually faster and also often returns the timestamp	183	C<ev_now> function is usually faster and also often returns the timestamp
169	you actually want to know.	184	you actually want to know. Also interesting is the combination of
		185	C<ev_now_update> and C<ev_now>.
170		186
171	=item ev_sleep (ev_tstamp interval)	187	=item ev_sleep (ev_tstamp interval)
172		188
173	Sleep for the given interval: The current thread will be blocked until	189	Sleep for the given interval: The current thread will be blocked
174	either it is interrupted or the given time interval has passed. Basically	190	until either it is interrupted or the given time interval has
		191	passed (approximately - it might return a bit earlier even if not
		192	interrupted). Returns immediately if C<< interval <= 0 >>.
		193
175	this is a sub-second-resolution C<sleep ()>.	194	Basically this is a sub-second-resolution C<sleep ()>.
		195
		196	The range of the C<interval> is limited - libev only guarantees to work
		197	with sleep times of up to one day (C<< interval <= 86400 >>).
176		198
177	=item int ev_version_major ()	199	=item int ev_version_major ()
178		200
179	=item int ev_version_minor ()	201	=item int ev_version_minor ()
180		202
…		…
191	as this indicates an incompatible change. Minor versions are usually	213	as this indicates an incompatible change. Minor versions are usually
192	compatible to older versions, so a larger minor version alone is usually	214	compatible to older versions, so a larger minor version alone is usually
193	not a problem.	215	not a problem.
194		216
195	Example: Make sure we haven't accidentally been linked against the wrong	217	Example: Make sure we haven't accidentally been linked against the wrong
196	version.	218	version (note, however, that this will not detect other ABI mismatches,
		219	such as LFS or reentrancy).
197		220
198	assert (("libev version mismatch",	221	assert (("libev version mismatch",
199	ev_version_major () == EV_VERSION_MAJOR	222	ev_version_major () == EV_VERSION_MAJOR
200	&& ev_version_minor () >= EV_VERSION_MINOR));	223	&& ev_version_minor () >= EV_VERSION_MINOR));
201		224
…		…
212	assert (("sorry, no epoll, no sex",	235	assert (("sorry, no epoll, no sex",
213	ev_supported_backends () & EVBACKEND_EPOLL));	236	ev_supported_backends () & EVBACKEND_EPOLL));
214		237
215	=item unsigned int ev_recommended_backends ()	238	=item unsigned int ev_recommended_backends ()
216		239
217	Return the set of all backends compiled into this binary of libev and also	240	Return the set of all backends compiled into this binary of libev and
218	recommended for this platform. This set is often smaller than the one	241	also recommended for this platform, meaning it will work for most file
		242	descriptor types. This set is often smaller than the one returned by
219	returned by C<ev_supported_backends>, as for example kqueue is broken on	243	C<ev_supported_backends>, as for example kqueue is broken on most BSDs
220	most BSDs and will not be auto-detected unless you explicitly request it	244	and will not be auto-detected unless you explicitly request it (assuming
221	(assuming you know what you are doing). This is the set of backends that	245	you know what you are doing). This is the set of backends that libev will
222	libev will probe for if you specify no backends explicitly.	246	probe for if you specify no backends explicitly.
223		247
224	=item unsigned int ev_embeddable_backends ()	248	=item unsigned int ev_embeddable_backends ()
225		249
226	Returns the set of backends that are embeddable in other event loops. This	250	Returns the set of backends that are embeddable in other event loops. This
227	is the theoretical, all-platform, value. To find which backends	251	value is platform-specific but can include backends not available on the
228	might be supported on the current system, you would need to look at	252	current system. To find which embeddable backends might be supported on
229	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for	253	the current system, you would need to look at C<ev_embeddable_backends ()
230	recommended ones.	254	& ev_supported_backends ()>, likewise for recommended ones.
231		255
232	See the description of C<ev_embed> watchers for more info.	256	See the description of C<ev_embed> watchers for more info.
233		257
234	=item ev_set_allocator (void *(*cb)(void *ptr, long size)) [NOT REENTRANT]	258	=item ev_set_allocator (void *(*cb)(void *ptr, long size) throw ())
235		259
236	Sets the allocation function to use (the prototype is similar - the	260	Sets the allocation function to use (the prototype is similar - the
237	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is	261	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
238	used to allocate and free memory (no surprises here). If it returns zero	262	used to allocate and free memory (no surprises here). If it returns zero
239	when memory needs to be allocated (C<size != 0>), the library might abort	263	when memory needs to be allocated (C<size != 0>), the library might abort
…		…
245		269
246	You could override this function in high-availability programs to, say,	270	You could override this function in high-availability programs to, say,
247	free some memory if it cannot allocate memory, to use a special allocator,	271	free some memory if it cannot allocate memory, to use a special allocator,
248	or even to sleep a while and retry until some memory is available.	272	or even to sleep a while and retry until some memory is available.
249		273
		274	Example: The following is the C<realloc> function that libev itself uses
		275	which should work with C<realloc> and C<free> functions of all kinds and
		276	is probably a good basis for your own implementation.
		277
		278	static void *
		279	ev_realloc_emul (void *ptr, long size) EV_NOEXCEPT
		280	{
		281	if (size)
		282	return realloc (ptr, size);
		283
		284	free (ptr);
		285	return 0;
		286	}
		287
250	Example: Replace the libev allocator with one that waits a bit and then	288	Example: Replace the libev allocator with one that waits a bit and then
251	retries (example requires a standards-compliant C<realloc>).	289	retries.
252		290
253	static void *	291	static void *
254	persistent_realloc (void *ptr, size_t size)	292	persistent_realloc (void *ptr, size_t size)
255	{	293	{
		294	if (!size)
		295	{
		296	free (ptr);
		297	return 0;
		298	}
		299
256	for (;;)	300	for (;;)
257	{	301	{
258	void *newptr = realloc (ptr, size);	302	void *newptr = realloc (ptr, size);
259		303
260	if (newptr)	304	if (newptr)
…		…
265	}	309	}
266		310
267	...	311	...
268	ev_set_allocator (persistent_realloc);	312	ev_set_allocator (persistent_realloc);
269		313
270	=item ev_set_syserr_cb (void (*cb)(const char *msg)); [NOT REENTRANT]	314	=item ev_set_syserr_cb (void (*cb)(const char *msg) throw ())
271		315
272	Set the callback function to call on a retryable system call error (such	316	Set the callback function to call on a retryable system call error (such
273	as failed select, poll, epoll_wait). The message is a printable string	317	as failed select, poll, epoll_wait). The message is a printable string
274	indicating the system call or subsystem causing the problem. If this	318	indicating the system call or subsystem causing the problem. If this
275	callback is set, then libev will expect it to remedy the situation, no	319	callback is set, then libev will expect it to remedy the situation, no
…		…
287	}	331	}
288		332
289	...	333	...
290	ev_set_syserr_cb (fatal_error);	334	ev_set_syserr_cb (fatal_error);
291		335
		336	=item ev_feed_signal (int signum)
		337
		338	This function can be used to "simulate" a signal receive. It is completely
		339	safe to call this function at any time, from any context, including signal
		340	handlers or random threads.
		341
		342	Its main use is to customise signal handling in your process, especially
		343	in the presence of threads. For example, you could block signals
		344	by default in all threads (and specifying C<EVFLAG_NOSIGMASK> when
		345	creating any loops), and in one thread, use C<sigwait> or any other
		346	mechanism to wait for signals, then "deliver" them to libev by calling
		347	C<ev_feed_signal>.
		348
292	=back	349	=back
293		350
294	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	351	=head1 FUNCTIONS CONTROLLING EVENT LOOPS
295		352
296	An event loop is described by a C<struct ev_loop *> (the C<struct>	353	An event loop is described by a C<struct ev_loop *> (the C<struct> is
297	is I<not> optional in this case, as there is also an C<ev_loop>	354	I<not> optional in this case unless libev 3 compatibility is disabled, as
298	I<function>).	355	libev 3 had an C<ev_loop> function colliding with the struct name).
299		356
300	The library knows two types of such loops, the I<default> loop, which	357	The library knows two types of such loops, the I<default> loop, which
301	supports signals and child events, and dynamically created loops which do	358	supports child process events, and dynamically created event loops which
302	not.	359	do not.
303		360
304	=over 4	361	=over 4
305		362
306	=item struct ev_loop *ev_default_loop (unsigned int flags)	363	=item struct ev_loop *ev_default_loop (unsigned int flags)
307		364
308	This will initialise the default event loop if it hasn't been initialised	365	This returns the "default" event loop object, which is what you should
309	yet and return it. If the default loop could not be initialised, returns	366	normally use when you just need "the event loop". Event loop objects and
310	false. If it already was initialised it simply returns it (and ignores the	367	the C<flags> parameter are described in more detail in the entry for
311	flags. If that is troubling you, check C<ev_backend ()> afterwards).	368	C<ev_loop_new>.
		369
		370	If the default loop is already initialised then this function simply
		371	returns it (and ignores the flags. If that is troubling you, check
		372	C<ev_backend ()> afterwards). Otherwise it will create it with the given
		373	flags, which should almost always be C<0>, unless the caller is also the
		374	one calling C<ev_run> or otherwise qualifies as "the main program".
312		375
313	If you don't know what event loop to use, use the one returned from this	376	If you don't know what event loop to use, use the one returned from this
314	function.	377	function (or via the C<EV_DEFAULT> macro).
315		378
316	Note that this function is I<not> thread-safe, so if you want to use it	379	Note that this function is I<not> thread-safe, so if you want to use it
317	from multiple threads, you have to lock (note also that this is unlikely,	380	from multiple threads, you have to employ some kind of mutex (note also
318	as loops cannot be shared easily between threads anyway).	381	that this case is unlikely, as loops cannot be shared easily between
		382	threads anyway).
319		383
320	The default loop is the only loop that can handle C<ev_signal> and	384	The default loop is the only loop that can handle C<ev_child> watchers,
321	C<ev_child> watchers, and to do this, it always registers a handler	385	and to do this, it always registers a handler for C<SIGCHLD>. If this is
322	for C<SIGCHLD>. If this is a problem for your application you can either	386	a problem for your application you can either create a dynamic loop with
323	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you	387	C<ev_loop_new> which doesn't do that, or you can simply overwrite the
324	can simply overwrite the C<SIGCHLD> signal handler I<after> calling	388	C<SIGCHLD> signal handler I<after> calling C<ev_default_init>.
325	C<ev_default_init>.	389
		390	Example: This is the most typical usage.
		391
		392	if (!ev_default_loop (0))
		393	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		394
		395	Example: Restrict libev to the select and poll backends, and do not allow
		396	environment settings to be taken into account:
		397
		398	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
		399
		400	=item struct ev_loop *ev_loop_new (unsigned int flags)
		401
		402	This will create and initialise a new event loop object. If the loop
		403	could not be initialised, returns false.
		404
		405	This function is thread-safe, and one common way to use libev with
		406	threads is indeed to create one loop per thread, and using the default
		407	loop in the "main" or "initial" thread.
326		408
327	The flags argument can be used to specify special behaviour or specific	409	The flags argument can be used to specify special behaviour or specific
328	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	410	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
329		411
330	The following flags are supported:	412	The following flags are supported:
…		…
340		422
341	If this flag bit is or'ed into the flag value (or the program runs setuid	423	If this flag bit is or'ed into the flag value (or the program runs setuid
342	or setgid) then libev will I<not> look at the environment variable	424	or setgid) then libev will I<not> look at the environment variable
343	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will	425	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will
344	override the flags completely if it is found in the environment. This is	426	override the flags completely if it is found in the environment. This is
345	useful to try out specific backends to test their performance, or to work	427	useful to try out specific backends to test their performance, to work
346	around bugs.	428	around bugs, or to make libev threadsafe (accessing environment variables
		429	cannot be done in a threadsafe way, but usually it works if no other
		430	thread modifies them).
347		431
348	=item C<EVFLAG_FORKCHECK>	432	=item C<EVFLAG_FORKCHECK>
349		433
350	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after	434	Instead of calling C<ev_loop_fork> manually after a fork, you can also
351	a fork, you can also make libev check for a fork in each iteration by	435	make libev check for a fork in each iteration by enabling this flag.
352	enabling this flag.
353		436
354	This works by calling C<getpid ()> on every iteration of the loop,	437	This works by calling C<getpid ()> on every iteration of the loop,
355	and thus this might slow down your event loop if you do a lot of loop	438	and thus this might slow down your event loop if you do a lot of loop
356	iterations and little real work, but is usually not noticeable (on my	439	iterations and little real work, but is usually not noticeable (on my
357	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence	440	GNU/Linux system for example, C<getpid> is actually a simple 5-insn
358	without a system call and thus I<very> fast, but my GNU/Linux system also has	441	sequence without a system call and thus I<very> fast, but my GNU/Linux
359	C<pthread_atfork> which is even faster).	442	system also has C<pthread_atfork> which is even faster). (Update: glibc
		443	versions 2.25 apparently removed the C<getpid> optimisation again).
360		444
361	The big advantage of this flag is that you can forget about fork (and	445	The big advantage of this flag is that you can forget about fork (and
362	forget about forgetting to tell libev about forking) when you use this	446	forget about forgetting to tell libev about forking, although you still
363	flag.	447	have to ignore C<SIGPIPE>) when you use this flag.
364		448
365	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>	449	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>
366	environment variable.	450	environment variable.
367		451
368	=item C<EVFLAG_NOINOTIFY>	452	=item C<EVFLAG_NOINOTIFY>
369		453
370	When this flag is specified, then libev will not attempt to use the	454	When this flag is specified, then libev will not attempt to use the
371	I<inotify> API for it's C<ev_stat> watchers. Apart from debugging and	455	I<inotify> API for its C<ev_stat> watchers. Apart from debugging and
372	testing, this flag can be useful to conserve inotify file descriptors, as	456	testing, this flag can be useful to conserve inotify file descriptors, as
373	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.	457	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.
374		458
375	=item C<EVFLAG_NOSIGNALFD>	459	=item C<EVFLAG_SIGNALFD>
376		460
377	When this flag is specified, then libev will not attempt to use the	461	When this flag is specified, then libev will attempt to use the
378	I<signalfd> API for it's C<ev_signal> (and C<ev_child>) watchers. This is	462	I<signalfd> API for its C<ev_signal> (and C<ev_child>) watchers. This API
379	probably only useful to work around any bugs in libev. Consequently, this	463	delivers signals synchronously, which makes it both faster and might make
380	flag might go away once the signalfd functionality is considered stable,	464	it possible to get the queued signal data. It can also simplify signal
381	so it's useful mostly in environment variables and not in program code.	465	handling with threads, as long as you properly block signals in your
		466	threads that are not interested in handling them.
		467
		468	Signalfd will not be used by default as this changes your signal mask, and
		469	there are a lot of shoddy libraries and programs (glib's threadpool for
		470	example) that can't properly initialise their signal masks.
		471
		472	=item C<EVFLAG_NOSIGMASK>
		473
		474	When this flag is specified, then libev will avoid to modify the signal
		475	mask. Specifically, this means you have to make sure signals are unblocked
		476	when you want to receive them.
		477
		478	This behaviour is useful when you want to do your own signal handling, or
		479	want to handle signals only in specific threads and want to avoid libev
		480	unblocking the signals.
		481
		482	It's also required by POSIX in a threaded program, as libev calls
		483	C<sigprocmask>, whose behaviour is officially unspecified.
		484
		485	=item C<EVFLAG_NOTIMERFD>
		486
		487	When this flag is specified, the libev will avoid using a C<timerfd> to
		488	detect time jumps. It will still be able to detect time jumps, but takes
		489	longer and has a lower accuracy in doing so, but saves a file descriptor
		490	per loop.
		491
		492	The current implementation only tries to use a C<timerfd> when the first
		493	C<ev_periodic> watcher is started and falls back on other methods if it
		494	cannot be created, but this behaviour might change in the future.
382		495
383	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	496	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
384		497
385	This is your standard select(2) backend. Not I<completely> standard, as	498	This is your standard select(2) backend. Not I<completely> standard, as
386	libev tries to roll its own fd_set with no limits on the number of fds,	499	libev tries to roll its own fd_set with no limits on the number of fds,
…		…
411	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and	524	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and
412	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.	525	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.
413		526
414	=item C<EVBACKEND_EPOLL> (value 4, Linux)	527	=item C<EVBACKEND_EPOLL> (value 4, Linux)
415		528
		529	Use the Linux-specific epoll(7) interface (for both pre- and post-2.6.9
		530	kernels).
		531
416	For few fds, this backend is a bit little slower than poll and select,	532	For few fds, this backend is a bit little slower than poll and select, but
417	but it scales phenomenally better. While poll and select usually scale	533	it scales phenomenally better. While poll and select usually scale like
418	like O(total_fds) where n is the total number of fds (or the highest fd),	534	O(total_fds) where total_fds is the total number of fds (or the highest
419	epoll scales either O(1) or O(active_fds).	535	fd), epoll scales either O(1) or O(active_fds).
420		536
421	The epoll mechanism deserves honorable mention as the most misdesigned	537	The epoll mechanism deserves honorable mention as the most misdesigned
422	of the more advanced event mechanisms: mere annoyances include silently	538	of the more advanced event mechanisms: mere annoyances include silently
423	dropping file descriptors, requiring a system call per change per file	539	dropping file descriptors, requiring a system call per change per file
424	descriptor (and unnecessary guessing of parameters), problems with dup and	540	descriptor (and unnecessary guessing of parameters), problems with dup,
		541	returning before the timeout value, resulting in additional iterations
		542	(and only giving 5ms accuracy while select on the same platform gives
425	so on. The biggest issue is fork races, however - if a program forks then	543	0.1ms) and so on. The biggest issue is fork races, however - if a program
426	I<both> parent and child process have to recreate the epoll set, which can	544	forks then I<both> parent and child process have to recreate the epoll
427	take considerable time (one syscall per file descriptor) and is of course	545	set, which can take considerable time (one syscall per file descriptor)
428	hard to detect.	546	and is of course hard to detect.
429		547
430	Epoll is also notoriously buggy - embedding epoll fds I<should> work, but	548	Epoll is also notoriously buggy - embedding epoll fds I<should> work,
431	of course I<doesn't>, and epoll just loves to report events for totally	549	but of course I<doesn't>, and epoll just loves to report events for
432	I<different> file descriptors (even already closed ones, so one cannot	550	totally I<different> file descriptors (even already closed ones, so
433	even remove them from the set) than registered in the set (especially	551	one cannot even remove them from the set) than registered in the set
434	on SMP systems). Libev tries to counter these spurious notifications by	552	(especially on SMP systems). Libev tries to counter these spurious
435	employing an additional generation counter and comparing that against the	553	notifications by employing an additional generation counter and comparing
436	events to filter out spurious ones, recreating the set when required.	554	that against the events to filter out spurious ones, recreating the set
		555	when required. Epoll also erroneously rounds down timeouts, but gives you
		556	no way to know when and by how much, so sometimes you have to busy-wait
		557	because epoll returns immediately despite a nonzero timeout. And last
		558	not least, it also refuses to work with some file descriptors which work
		559	perfectly fine with C<select> (files, many character devices...).
		560
		561	Epoll is truly the train wreck among event poll mechanisms, a frankenpoll,
		562	cobbled together in a hurry, no thought to design or interaction with
		563	others. Oh, the pain, will it ever stop...
437		564
438	While stopping, setting and starting an I/O watcher in the same iteration	565	While stopping, setting and starting an I/O watcher in the same iteration
439	will result in some caching, there is still a system call per such	566	will result in some caching, there is still a system call per such
440	incident (because the same I<file descriptor> could point to a different	567	incident (because the same I<file descriptor> could point to a different
441	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed	568	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed
…		…
453	All this means that, in practice, C<EVBACKEND_SELECT> can be as fast or	580	All this means that, in practice, C<EVBACKEND_SELECT> can be as fast or
454	faster than epoll for maybe up to a hundred file descriptors, depending on	581	faster than epoll for maybe up to a hundred file descriptors, depending on
455	the usage. So sad.	582	the usage. So sad.
456		583
457	While nominally embeddable in other event loops, this feature is broken in	584	While nominally embeddable in other event loops, this feature is broken in
458	all kernel versions tested so far.	585	a lot of kernel revisions, but probably(!) works in current versions.
459		586
460	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as	587	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
461	C<EVBACKEND_POLL>.	588	C<EVBACKEND_POLL>.
462		589
		590	=item C<EVBACKEND_LINUXAIO> (value 64, Linux)
		591
		592	Use the Linux-specific Linux AIO (I<not> C<< aio(7) >> but C<<
		593	io_submit(2) >>) event interface available in post-4.18 kernels (but libev
		594	only tries to use it in 4.19+).
		595
		596	This is another Linux train wreck of an event interface.
		597
		598	If this backend works for you (as of this writing, it was very
		599	experimental), it is the best event interface available on Linux and might
		600	be well worth enabling it - if it isn't available in your kernel this will
		601	be detected and this backend will be skipped.
		602
		603	This backend can batch oneshot requests and supports a user-space ring
		604	buffer to receive events. It also doesn't suffer from most of the design
		605	problems of epoll (such as not being able to remove event sources from
		606	the epoll set), and generally sounds too good to be true. Because, this
		607	being the Linux kernel, of course it suffers from a whole new set of
		608	limitations, forcing you to fall back to epoll, inheriting all its design
		609	issues.
		610
		611	For one, it is not easily embeddable (but probably could be done using
		612	an event fd at some extra overhead). It also is subject to a system wide
		613	limit that can be configured in F</proc/sys/fs/aio-max-nr>. If no AIO
		614	requests are left, this backend will be skipped during initialisation, and
		615	will switch to epoll when the loop is active.
		616
		617	Most problematic in practice, however, is that not all file descriptors
		618	work with it. For example, in Linux 5.1, TCP sockets, pipes, event fds,
		619	files, F</dev/null> and many others are supported, but ttys do not work
		620	properly (a known bug that the kernel developers don't care about, see
		621	L<https://lore.kernel.org/patchwork/patch/1047453/>), so this is not
		622	(yet?) a generic event polling interface.
		623
		624	Overall, it seems the Linux developers just don't want it to have a
		625	generic event handling mechanism other than C<select> or C<poll>.
		626
		627	To work around all these problem, the current version of libev uses its
		628	epoll backend as a fallback for file descriptor types that do not work. Or
		629	falls back completely to epoll if the kernel acts up.
		630
		631	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
		632	C<EVBACKEND_POLL>.
		633
463	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	634	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
464		635
465	Kqueue deserves special mention, as at the time of this writing, it	636	Kqueue deserves special mention, as at the time this backend was
466	was broken on all BSDs except NetBSD (usually it doesn't work reliably	637	implemented, it was broken on all BSDs except NetBSD (usually it doesn't
467	with anything but sockets and pipes, except on Darwin, where of course	638	work reliably with anything but sockets and pipes, except on Darwin,
468	it's completely useless). Unlike epoll, however, whose brokenness	639	where of course it's completely useless). Unlike epoll, however, whose
469	is by design, these kqueue bugs can (and eventually will) be fixed	640	brokenness is by design, these kqueue bugs can be (and mostly have been)
470	without API changes to existing programs. For this reason it's not being	641	fixed without API changes to existing programs. For this reason it's not
471	"auto-detected" unless you explicitly specify it in the flags (i.e. using	642	being "auto-detected" on all platforms unless you explicitly specify it
472	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)	643	in the flags (i.e. using C<EVBACKEND_KQUEUE>) or libev was compiled on a
473	system like NetBSD.	644	known-to-be-good (-enough) system like NetBSD.
474		645
475	You still can embed kqueue into a normal poll or select backend and use it	646	You still can embed kqueue into a normal poll or select backend and use it
476	only for sockets (after having made sure that sockets work with kqueue on	647	only for sockets (after having made sure that sockets work with kqueue on
477	the target platform). See C<ev_embed> watchers for more info.	648	the target platform). See C<ev_embed> watchers for more info.
478		649
479	It scales in the same way as the epoll backend, but the interface to the	650	It scales in the same way as the epoll backend, but the interface to the
480	kernel is more efficient (which says nothing about its actual speed, of	651	kernel is more efficient (which says nothing about its actual speed, of
481	course). While stopping, setting and starting an I/O watcher does never	652	course). While stopping, setting and starting an I/O watcher does never
482	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to	653	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to
483	two event changes per incident. Support for C<fork ()> is very bad (but	654	two event changes per incident. Support for C<fork ()> is very bad (you
484	sane, unlike epoll) and it drops fds silently in similarly hard-to-detect	655	might have to leak fds on fork, but it's more sane than epoll) and it
485	cases	656	drops fds silently in similarly hard-to-detect cases.
486		657
487	This backend usually performs well under most conditions.	658	This backend usually performs well under most conditions.
488		659
489	While nominally embeddable in other event loops, this doesn't work	660	While nominally embeddable in other event loops, this doesn't work
490	everywhere, so you might need to test for this. And since it is broken	661	everywhere, so you might need to test for this. And since it is broken
…		…
507	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	678	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
508		679
509	This uses the Solaris 10 event port mechanism. As with everything on Solaris,	680	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
510	it's really slow, but it still scales very well (O(active_fds)).	681	it's really slow, but it still scales very well (O(active_fds)).
511		682
512	Please note that Solaris event ports can deliver a lot of spurious
513	notifications, so you need to use non-blocking I/O or other means to avoid
514	blocking when no data (or space) is available.
515
516	While this backend scales well, it requires one system call per active	683	While this backend scales well, it requires one system call per active
517	file descriptor per loop iteration. For small and medium numbers of file	684	file descriptor per loop iteration. For small and medium numbers of file
518	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend	685	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
519	might perform better.	686	might perform better.
520		687
521	On the positive side, with the exception of the spurious readiness	688	On the positive side, this backend actually performed fully to
522	notifications, this backend actually performed fully to specification
523	in all tests and is fully embeddable, which is a rare feat among the	689	specification in all tests and is fully embeddable, which is a rare feat
524	OS-specific backends (I vastly prefer correctness over speed hacks).	690	among the OS-specific backends (I vastly prefer correctness over speed
		691	hacks).
		692
		693	On the negative side, the interface is I<bizarre> - so bizarre that
		694	even sun itself gets it wrong in their code examples: The event polling
		695	function sometimes returns events to the caller even though an error
		696	occurred, but with no indication whether it has done so or not (yes, it's
		697	even documented that way) - deadly for edge-triggered interfaces where you
		698	absolutely have to know whether an event occurred or not because you have
		699	to re-arm the watcher.
		700
		701	Fortunately libev seems to be able to work around these idiocies.
525		702
526	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as	703	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
527	C<EVBACKEND_POLL>.	704	C<EVBACKEND_POLL>.
528		705
529	=item C<EVBACKEND_ALL>	706	=item C<EVBACKEND_ALL>
530		707
531	Try all backends (even potentially broken ones that wouldn't be tried	708	Try all backends (even potentially broken ones that wouldn't be tried
532	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	709	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
533	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	710	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
534		711
535	It is definitely not recommended to use this flag.	712	It is definitely not recommended to use this flag, use whatever
		713	C<ev_recommended_backends ()> returns, or simply do not specify a backend
		714	at all.
		715
		716	=item C<EVBACKEND_MASK>
		717
		718	Not a backend at all, but a mask to select all backend bits from a
		719	C<flags> value, in case you want to mask out any backends from a flags
		720	value (e.g. when modifying the C<LIBEV_FLAGS> environment variable).
536		721
537	=back	722	=back
538		723
539	If one or more of the backend flags are or'ed into the flags value,	724	If one or more of the backend flags are or'ed into the flags value,
540	then only these backends will be tried (in the reverse order as listed	725	then only these backends will be tried (in the reverse order as listed
541	here). If none are specified, all backends in C<ev_recommended_backends	726	here). If none are specified, all backends in C<ev_recommended_backends
542	()> will be tried.	727	()> will be tried.
543		728
544	Example: This is the most typical usage.
545
546	if (!ev_default_loop (0))
547	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
548
549	Example: Restrict libev to the select and poll backends, and do not allow
550	environment settings to be taken into account:
551
552	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
553
554	Example: Use whatever libev has to offer, but make sure that kqueue is
555	used if available (warning, breaks stuff, best use only with your own
556	private event loop and only if you know the OS supports your types of
557	fds):
558
559	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
560
561	=item struct ev_loop *ev_loop_new (unsigned int flags)
562
563	Similar to C<ev_default_loop>, but always creates a new event loop that is
564	always distinct from the default loop. Unlike the default loop, it cannot
565	handle signal and child watchers, and attempts to do so will be greeted by
566	undefined behaviour (or a failed assertion if assertions are enabled).
567
568	Note that this function I<is> thread-safe, and the recommended way to use
569	libev with threads is indeed to create one loop per thread, and using the
570	default loop in the "main" or "initial" thread.
571
572	Example: Try to create a event loop that uses epoll and nothing else.	729	Example: Try to create a event loop that uses epoll and nothing else.
573		730
574	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	731	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
575	if (!epoller)	732	if (!epoller)
576	fatal ("no epoll found here, maybe it hides under your chair");	733	fatal ("no epoll found here, maybe it hides under your chair");
577		734
		735	Example: Use whatever libev has to offer, but make sure that kqueue is
		736	used if available.
		737
		738	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_KQUEUE);
		739
		740	Example: Similarly, on linux, you mgiht want to take advantage of the
		741	linux aio backend if possible, but fall back to something else if that
		742	isn't available.
		743
		744	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_LINUXAIO);
		745
578	=item ev_default_destroy ()	746	=item ev_loop_destroy (loop)
579		747
580	Destroys the default loop again (frees all memory and kernel state	748	Destroys an event loop object (frees all memory and kernel state
581	etc.). None of the active event watchers will be stopped in the normal	749	etc.). None of the active event watchers will be stopped in the normal
582	sense, so e.g. C<ev_is_active> might still return true. It is your	750	sense, so e.g. C<ev_is_active> might still return true. It is your
583	responsibility to either stop all watchers cleanly yourself I<before>	751	responsibility to either stop all watchers cleanly yourself I<before>
584	calling this function, or cope with the fact afterwards (which is usually	752	calling this function, or cope with the fact afterwards (which is usually
585	the easiest thing, you can just ignore the watchers and/or C<free ()> them	753	the easiest thing, you can just ignore the watchers and/or C<free ()> them
…		…
587		755
588	Note that certain global state, such as signal state (and installed signal	756	Note that certain global state, such as signal state (and installed signal
589	handlers), will not be freed by this function, and related watchers (such	757	handlers), will not be freed by this function, and related watchers (such
590	as signal and child watchers) would need to be stopped manually.	758	as signal and child watchers) would need to be stopped manually.
591		759
592	In general it is not advisable to call this function except in the	760	This function is normally used on loop objects allocated by
593	rare occasion where you really need to free e.g. the signal handling	761	C<ev_loop_new>, but it can also be used on the default loop returned by
		762	C<ev_default_loop>, in which case it is not thread-safe.
		763
		764	Note that it is not advisable to call this function on the default loop
		765	except in the rare occasion where you really need to free its resources.
594	pipe fds. If you need dynamically allocated loops it is better to use	766	If you need dynamically allocated loops it is better to use C<ev_loop_new>
595	C<ev_loop_new> and C<ev_loop_destroy>).	767	and C<ev_loop_destroy>.
596		768
597	=item ev_loop_destroy (loop)	769	=item ev_loop_fork (loop)
598		770
599	Like C<ev_default_destroy>, but destroys an event loop created by an
600	earlier call to C<ev_loop_new>.
601
602	=item ev_default_fork ()
603
604	This function sets a flag that causes subsequent C<ev_loop> iterations	771	This function sets a flag that causes subsequent C<ev_run> iterations
605	to reinitialise the kernel state for backends that have one. Despite the	772	to reinitialise the kernel state for backends that have one. Despite
606	name, you can call it anytime, but it makes most sense after forking, in	773	the name, you can call it anytime you are allowed to start or stop
607	the child process (or both child and parent, but that again makes little	774	watchers (except inside an C<ev_prepare> callback), but it makes most
608	sense). You I<must> call it in the child before using any of the libev	775	sense after forking, in the child process. You I<must> call it (or use
609	functions, and it will only take effect at the next C<ev_loop> iteration.	776	C<EVFLAG_FORKCHECK>) in the child before resuming or calling C<ev_run>.
		777
		778	In addition, if you want to reuse a loop (via this function or
		779	C<EVFLAG_FORKCHECK>), you I<also> have to ignore C<SIGPIPE>.
		780
		781	Again, you I<have> to call it on I<any> loop that you want to re-use after
		782	a fork, I<even if you do not plan to use the loop in the parent>. This is
		783	because some kernel interfaces *cough* I<kqueue> *cough* do funny things
		784	during fork.
610		785
611	On the other hand, you only need to call this function in the child	786	On the other hand, you only need to call this function in the child
612	process if and only if you want to use the event library in the child. If	787	process if and only if you want to use the event loop in the child. If
613	you just fork+exec, you don't have to call it at all.	788	you just fork+exec or create a new loop in the child, you don't have to
		789	call it at all (in fact, C<epoll> is so badly broken that it makes a
		790	difference, but libev will usually detect this case on its own and do a
		791	costly reset of the backend).
614		792
615	The function itself is quite fast and it's usually not a problem to call	793	The function itself is quite fast and it's usually not a problem to call
616	it just in case after a fork. To make this easy, the function will fit in	794	it just in case after a fork.
617	quite nicely into a call to C<pthread_atfork>:
618		795
		796	Example: Automate calling C<ev_loop_fork> on the default loop when
		797	using pthreads.
		798
		799	static void
		800	post_fork_child (void)
		801	{
		802	ev_loop_fork (EV_DEFAULT);
		803	}
		804
		805	...
619	pthread_atfork (0, 0, ev_default_fork);	806	pthread_atfork (0, 0, post_fork_child);
620
621	=item ev_loop_fork (loop)
622
623	Like C<ev_default_fork>, but acts on an event loop created by
624	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
625	after fork that you want to re-use in the child, and how you do this is
626	entirely your own problem.
627		807
628	=item int ev_is_default_loop (loop)	808	=item int ev_is_default_loop (loop)
629		809
630	Returns true when the given loop is, in fact, the default loop, and false	810	Returns true when the given loop is, in fact, the default loop, and false
631	otherwise.	811	otherwise.
632		812
633	=item unsigned int ev_loop_count (loop)	813	=item unsigned int ev_iteration (loop)
634		814
635	Returns the count of loop iterations for the loop, which is identical to	815	Returns the current iteration count for the event loop, which is identical
636	the number of times libev did poll for new events. It starts at C<0> and	816	to the number of times libev did poll for new events. It starts at C<0>
637	happily wraps around with enough iterations.	817	and happily wraps around with enough iterations.
638		818
639	This value can sometimes be useful as a generation counter of sorts (it	819	This value can sometimes be useful as a generation counter of sorts (it
640	"ticks" the number of loop iterations), as it roughly corresponds with	820	"ticks" the number of loop iterations), as it roughly corresponds with
641	C<ev_prepare> and C<ev_check> calls.	821	C<ev_prepare> and C<ev_check> calls - and is incremented between the
		822	prepare and check phases.
642		823
643	=item unsigned int ev_loop_depth (loop)	824	=item unsigned int ev_depth (loop)
644		825
645	Returns the number of times C<ev_loop> was entered minus the number of	826	Returns the number of times C<ev_run> was entered minus the number of
646	times C<ev_loop> was exited, in other words, the recursion depth.	827	times C<ev_run> was exited normally, in other words, the recursion depth.
647		828
648	Outside C<ev_loop>, this number is zero. In a callback, this number is	829	Outside C<ev_run>, this number is zero. In a callback, this number is
649	C<1>, unless C<ev_loop> was invoked recursively (or from another thread),	830	C<1>, unless C<ev_run> was invoked recursively (or from another thread),
650	in which case it is higher.	831	in which case it is higher.
651		832
652	Leaving C<ev_loop> abnormally (setjmp/longjmp, cancelling the thread	833	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread,
653	etc.), doesn't count as exit.	834	throwing an exception etc.), doesn't count as "exit" - consider this
		835	as a hint to avoid such ungentleman-like behaviour unless it's really
		836	convenient, in which case it is fully supported.
654		837
655	=item unsigned int ev_backend (loop)	838	=item unsigned int ev_backend (loop)
656		839
657	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	840	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
658	use.	841	use.
…		…
667		850
668	=item ev_now_update (loop)	851	=item ev_now_update (loop)
669		852
670	Establishes the current time by querying the kernel, updating the time	853	Establishes the current time by querying the kernel, updating the time
671	returned by C<ev_now ()> in the progress. This is a costly operation and	854	returned by C<ev_now ()> in the progress. This is a costly operation and
672	is usually done automatically within C<ev_loop ()>.	855	is usually done automatically within C<ev_run ()>.
673		856
674	This function is rarely useful, but when some event callback runs for a	857	This function is rarely useful, but when some event callback runs for a
675	very long time without entering the event loop, updating libev's idea of	858	very long time without entering the event loop, updating libev's idea of
676	the current time is a good idea.	859	the current time is a good idea.
677		860
678	See also L<The special problem of time updates> in the C<ev_timer> section.	861	See also L</The special problem of time updates> in the C<ev_timer> section.
679		862
680	=item ev_suspend (loop)	863	=item ev_suspend (loop)
681		864
682	=item ev_resume (loop)	865	=item ev_resume (loop)
683		866
684	These two functions suspend and resume a loop, for use when the loop is	867	These two functions suspend and resume an event loop, for use when the
685	not used for a while and timeouts should not be processed.	868	loop is not used for a while and timeouts should not be processed.
686		869
687	A typical use case would be an interactive program such as a game: When	870	A typical use case would be an interactive program such as a game: When
688	the user presses C<^Z> to suspend the game and resumes it an hour later it	871	the user presses C<^Z> to suspend the game and resumes it an hour later it
689	would be best to handle timeouts as if no time had actually passed while	872	would be best to handle timeouts as if no time had actually passed while
690	the program was suspended. This can be achieved by calling C<ev_suspend>	873	the program was suspended. This can be achieved by calling C<ev_suspend>
…		…
692	C<ev_resume> directly afterwards to resume timer processing.	875	C<ev_resume> directly afterwards to resume timer processing.
693		876
694	Effectively, all C<ev_timer> watchers will be delayed by the time spend	877	Effectively, all C<ev_timer> watchers will be delayed by the time spend
695	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers	878	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers
696	will be rescheduled (that is, they will lose any events that would have	879	will be rescheduled (that is, they will lose any events that would have
697	occured while suspended).	880	occurred while suspended).
698		881
699	After calling C<ev_suspend> you B<must not> call I<any> function on the	882	After calling C<ev_suspend> you B<must not> call I<any> function on the
700	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>	883	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>
701	without a previous call to C<ev_suspend>.	884	without a previous call to C<ev_suspend>.
702		885
703	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the	886	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the
704	event loop time (see C<ev_now_update>).	887	event loop time (see C<ev_now_update>).
705		888
706	=item ev_loop (loop, int flags)	889	=item bool ev_run (loop, int flags)
707		890
708	Finally, this is it, the event handler. This function usually is called	891	Finally, this is it, the event handler. This function usually is called
709	after you initialised all your watchers and you want to start handling	892	after you have initialised all your watchers and you want to start
710	events.	893	handling events. It will ask the operating system for any new events, call
		894	the watcher callbacks, and then repeat the whole process indefinitely: This
		895	is why event loops are called I<loops>.
711		896
712	If the flags argument is specified as C<0>, it will not return until	897	If the flags argument is specified as C<0>, it will keep handling events
713	either no event watchers are active anymore or C<ev_unloop> was called.	898	until either no event watchers are active anymore or C<ev_break> was
		899	called.
714		900
		901	The return value is false if there are no more active watchers (which
		902	usually means "all jobs done" or "deadlock"), and true in all other cases
		903	(which usually means " you should call C<ev_run> again").
		904
715	Please note that an explicit C<ev_unloop> is usually better than	905	Please note that an explicit C<ev_break> is usually better than
716	relying on all watchers to be stopped when deciding when a program has	906	relying on all watchers to be stopped when deciding when a program has
717	finished (especially in interactive programs), but having a program	907	finished (especially in interactive programs), but having a program
718	that automatically loops as long as it has to and no longer by virtue	908	that automatically loops as long as it has to and no longer by virtue
719	of relying on its watchers stopping correctly, that is truly a thing of	909	of relying on its watchers stopping correctly, that is truly a thing of
720	beauty.	910	beauty.
721		911
		912	This function is I<mostly> exception-safe - you can break out of a
		913	C<ev_run> call by calling C<longjmp> in a callback, throwing a C++
		914	exception and so on. This does not decrement the C<ev_depth> value, nor
		915	will it clear any outstanding C<EVBREAK_ONE> breaks.
		916
722	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle	917	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle
723	those events and any already outstanding ones, but will not block your	918	those events and any already outstanding ones, but will not wait and
724	process in case there are no events and will return after one iteration of	919	block your process in case there are no events and will return after one
725	the loop.	920	iteration of the loop. This is sometimes useful to poll and handle new
		921	events while doing lengthy calculations, to keep the program responsive.
726		922
727	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if	923	A flags value of C<EVRUN_ONCE> will look for new events (waiting if
728	necessary) and will handle those and any already outstanding ones. It	924	necessary) and will handle those and any already outstanding ones. It
729	will block your process until at least one new event arrives (which could	925	will block your process until at least one new event arrives (which could
730	be an event internal to libev itself, so there is no guarantee that a	926	be an event internal to libev itself, so there is no guarantee that a
731	user-registered callback will be called), and will return after one	927	user-registered callback will be called), and will return after one
732	iteration of the loop.	928	iteration of the loop.
733		929
734	This is useful if you are waiting for some external event in conjunction	930	This is useful if you are waiting for some external event in conjunction
735	with something not expressible using other libev watchers (i.e. "roll your	931	with something not expressible using other libev watchers (i.e. "roll your
736	own C<ev_loop>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is	932	own C<ev_run>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is
737	usually a better approach for this kind of thing.	933	usually a better approach for this kind of thing.
738		934
739	Here are the gory details of what C<ev_loop> does:	935	Here are the gory details of what C<ev_run> does (this is for your
		936	understanding, not a guarantee that things will work exactly like this in
		937	future versions):
740		938
		939	- Increment loop depth.
		940	- Reset the ev_break status.
741	- Before the first iteration, call any pending watchers.	941	- Before the first iteration, call any pending watchers.
		942	LOOP:
742	* If EVFLAG_FORKCHECK was used, check for a fork.	943	- If EVFLAG_FORKCHECK was used, check for a fork.
743	- If a fork was detected (by any means), queue and call all fork watchers.	944	- If a fork was detected (by any means), queue and call all fork watchers.
744	- Queue and call all prepare watchers.	945	- Queue and call all prepare watchers.
		946	- If ev_break was called, goto FINISH.
745	- If we have been forked, detach and recreate the kernel state	947	- If we have been forked, detach and recreate the kernel state
746	as to not disturb the other process.	948	as to not disturb the other process.
747	- Update the kernel state with all outstanding changes.	949	- Update the kernel state with all outstanding changes.
748	- Update the "event loop time" (ev_now ()).	950	- Update the "event loop time" (ev_now ()).
749	- Calculate for how long to sleep or block, if at all	951	- Calculate for how long to sleep or block, if at all
750	(active idle watchers, EVLOOP_NONBLOCK or not having	952	(active idle watchers, EVRUN_NOWAIT or not having
751	any active watchers at all will result in not sleeping).	953	any active watchers at all will result in not sleeping).
752	- Sleep if the I/O and timer collect interval say so.	954	- Sleep if the I/O and timer collect interval say so.
		955	- Increment loop iteration counter.
753	- Block the process, waiting for any events.	956	- Block the process, waiting for any events.
754	- Queue all outstanding I/O (fd) events.	957	- Queue all outstanding I/O (fd) events.
755	- Update the "event loop time" (ev_now ()), and do time jump adjustments.	958	- Update the "event loop time" (ev_now ()), and do time jump adjustments.
756	- Queue all expired timers.	959	- Queue all expired timers.
757	- Queue all expired periodics.	960	- Queue all expired periodics.
758	- Unless any events are pending now, queue all idle watchers.	961	- Queue all idle watchers with priority higher than that of pending events.
759	- Queue all check watchers.	962	- Queue all check watchers.
760	- Call all queued watchers in reverse order (i.e. check watchers first).	963	- Call all queued watchers in reverse order (i.e. check watchers first).
761	Signals and child watchers are implemented as I/O watchers, and will	964	Signals and child watchers are implemented as I/O watchers, and will
762	be handled here by queueing them when their watcher gets executed.	965	be handled here by queueing them when their watcher gets executed.
763	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	966	- If ev_break has been called, or EVRUN_ONCE or EVRUN_NOWAIT
764	were used, or there are no active watchers, return, otherwise	967	were used, or there are no active watchers, goto FINISH, otherwise
765	continue with step *.	968	continue with step LOOP.
		969	FINISH:
		970	- Reset the ev_break status iff it was EVBREAK_ONE.
		971	- Decrement the loop depth.
		972	- Return.
766		973
767	Example: Queue some jobs and then loop until no events are outstanding	974	Example: Queue some jobs and then loop until no events are outstanding
768	anymore.	975	anymore.
769		976
770	... queue jobs here, make sure they register event watchers as long	977	... queue jobs here, make sure they register event watchers as long
771	... as they still have work to do (even an idle watcher will do..)	978	... as they still have work to do (even an idle watcher will do..)
772	ev_loop (my_loop, 0);	979	ev_run (my_loop, 0);
773	... jobs done or somebody called unloop. yeah!	980	... jobs done or somebody called break. yeah!
774		981
775	=item ev_unloop (loop, how)	982	=item ev_break (loop, how)
776		983
777	Can be used to make a call to C<ev_loop> return early (but only after it	984	Can be used to make a call to C<ev_run> return early (but only after it
778	has processed all outstanding events). The C<how> argument must be either	985	has processed all outstanding events). The C<how> argument must be either
779	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	986	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or
780	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	987	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.
781		988
782	This "unloop state" will be cleared when entering C<ev_loop> again.	989	This "break state" will be cleared on the next call to C<ev_run>.
783		990
784	It is safe to call C<ev_unloop> from otuside any C<ev_loop> calls.	991	It is safe to call C<ev_break> from outside any C<ev_run> calls, too, in
		992	which case it will have no effect.
785		993
786	=item ev_ref (loop)	994	=item ev_ref (loop)
787		995
788	=item ev_unref (loop)	996	=item ev_unref (loop)
789		997
790	Ref/unref can be used to add or remove a reference count on the event	998	Ref/unref can be used to add or remove a reference count on the event
791	loop: Every watcher keeps one reference, and as long as the reference	999	loop: Every watcher keeps one reference, and as long as the reference
792	count is nonzero, C<ev_loop> will not return on its own.	1000	count is nonzero, C<ev_run> will not return on its own.
793		1001
794	If you have a watcher you never unregister that should not keep C<ev_loop>	1002	This is useful when you have a watcher that you never intend to
795	from returning, call ev_unref() after starting, and ev_ref() before	1003	unregister, but that nevertheless should not keep C<ev_run> from
		1004	returning. In such a case, call C<ev_unref> after starting, and C<ev_ref>
796	stopping it.	1005	before stopping it.
797		1006
798	As an example, libev itself uses this for its internal signal pipe: It	1007	As an example, libev itself uses this for its internal signal pipe: It
799	is not visible to the libev user and should not keep C<ev_loop> from	1008	is not visible to the libev user and should not keep C<ev_run> from
800	exiting if no event watchers registered by it are active. It is also an	1009	exiting if no event watchers registered by it are active. It is also an
801	excellent way to do this for generic recurring timers or from within	1010	excellent way to do this for generic recurring timers or from within
802	third-party libraries. Just remember to I<unref after start> and I<ref	1011	third-party libraries. Just remember to I<unref after start> and I<ref
803	before stop> (but only if the watcher wasn't active before, or was active	1012	before stop> (but only if the watcher wasn't active before, or was active
804	before, respectively. Note also that libev might stop watchers itself	1013	before, respectively. Note also that libev might stop watchers itself
805	(e.g. non-repeating timers) in which case you have to C<ev_ref>	1014	(e.g. non-repeating timers) in which case you have to C<ev_ref>
806	in the callback).	1015	in the callback).
807		1016
808	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	1017	Example: Create a signal watcher, but keep it from keeping C<ev_run>
809	running when nothing else is active.	1018	running when nothing else is active.
810		1019
811	ev_signal exitsig;	1020	ev_signal exitsig;
812	ev_signal_init (&exitsig, sig_cb, SIGINT);	1021	ev_signal_init (&exitsig, sig_cb, SIGINT);
813	ev_signal_start (loop, &exitsig);	1022	ev_signal_start (loop, &exitsig);
814	evf_unref (loop);	1023	ev_unref (loop);
815		1024
816	Example: For some weird reason, unregister the above signal handler again.	1025	Example: For some weird reason, unregister the above signal handler again.
817		1026
818	ev_ref (loop);	1027	ev_ref (loop);
819	ev_signal_stop (loop, &exitsig);	1028	ev_signal_stop (loop, &exitsig);
…		…
839	overhead for the actual polling but can deliver many events at once.	1048	overhead for the actual polling but can deliver many events at once.
840		1049
841	By setting a higher I<io collect interval> you allow libev to spend more	1050	By setting a higher I<io collect interval> you allow libev to spend more
842	time collecting I/O events, so you can handle more events per iteration,	1051	time collecting I/O events, so you can handle more events per iteration,
843	at the cost of increasing latency. Timeouts (both C<ev_periodic> and	1052	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
844	C<ev_timer>) will be not affected. Setting this to a non-null value will	1053	C<ev_timer>) will not be affected. Setting this to a non-null value will
845	introduce an additional C<ev_sleep ()> call into most loop iterations. The	1054	introduce an additional C<ev_sleep ()> call into most loop iterations. The
846	sleep time ensures that libev will not poll for I/O events more often then	1055	sleep time ensures that libev will not poll for I/O events more often then
847	once per this interval, on average.	1056	once per this interval, on average (as long as the host time resolution is
		1057	good enough).
848		1058
849	Likewise, by setting a higher I<timeout collect interval> you allow libev	1059	Likewise, by setting a higher I<timeout collect interval> you allow libev
850	to spend more time collecting timeouts, at the expense of increased	1060	to spend more time collecting timeouts, at the expense of increased
851	latency/jitter/inexactness (the watcher callback will be called	1061	latency/jitter/inexactness (the watcher callback will be called
852	later). C<ev_io> watchers will not be affected. Setting this to a non-null	1062	later). C<ev_io> watchers will not be affected. Setting this to a non-null
…		…
858	usually doesn't make much sense to set it to a lower value than C<0.01>,	1068	usually doesn't make much sense to set it to a lower value than C<0.01>,
859	as this approaches the timing granularity of most systems. Note that if	1069	as this approaches the timing granularity of most systems. Note that if
860	you do transactions with the outside world and you can't increase the	1070	you do transactions with the outside world and you can't increase the
861	parallelity, then this setting will limit your transaction rate (if you	1071	parallelity, then this setting will limit your transaction rate (if you
862	need to poll once per transaction and the I/O collect interval is 0.01,	1072	need to poll once per transaction and the I/O collect interval is 0.01,
863	then you can't do more than 100 transations per second).	1073	then you can't do more than 100 transactions per second).
864		1074
865	Setting the I<timeout collect interval> can improve the opportunity for	1075	Setting the I<timeout collect interval> can improve the opportunity for
866	saving power, as the program will "bundle" timer callback invocations that	1076	saving power, as the program will "bundle" timer callback invocations that
867	are "near" in time together, by delaying some, thus reducing the number of	1077	are "near" in time together, by delaying some, thus reducing the number of
868	times the process sleeps and wakes up again. Another useful technique to	1078	times the process sleeps and wakes up again. Another useful technique to
…		…
876	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);	1086	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);
877		1087
878	=item ev_invoke_pending (loop)	1088	=item ev_invoke_pending (loop)
879		1089
880	This call will simply invoke all pending watchers while resetting their	1090	This call will simply invoke all pending watchers while resetting their
881	pending state. Normally, C<ev_loop> does this automatically when required,	1091	pending state. Normally, C<ev_run> does this automatically when required,
882	but when overriding the invoke callback this call comes handy.	1092	but when overriding the invoke callback this call comes handy. This
		1093	function can be invoked from a watcher - this can be useful for example
		1094	when you want to do some lengthy calculation and want to pass further
		1095	event handling to another thread (you still have to make sure only one
		1096	thread executes within C<ev_invoke_pending> or C<ev_run> of course).
883		1097
884	=item int ev_pending_count (loop)	1098	=item int ev_pending_count (loop)
885		1099
886	Returns the number of pending watchers - zero indicates that no watchers	1100	Returns the number of pending watchers - zero indicates that no watchers
887	are pending.	1101	are pending.
888		1102
889	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))	1103	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))
890		1104
891	This overrides the invoke pending functionality of the loop: Instead of	1105	This overrides the invoke pending functionality of the loop: Instead of
892	invoking all pending watchers when there are any, C<ev_loop> will call	1106	invoking all pending watchers when there are any, C<ev_run> will call
893	this callback instead. This is useful, for example, when you want to	1107	this callback instead. This is useful, for example, when you want to
894	invoke the actual watchers inside another context (another thread etc.).	1108	invoke the actual watchers inside another context (another thread etc.).
895		1109
896	If you want to reset the callback, use C<ev_invoke_pending> as new	1110	If you want to reset the callback, use C<ev_invoke_pending> as new
897	callback.	1111	callback.
898		1112
899	=item ev_set_loop_release_cb (loop, void (*release)(EV_P), void (*acquire)(EV_P))	1113	=item ev_set_loop_release_cb (loop, void (*release)(EV_P) throw (), void (*acquire)(EV_P) throw ())
900		1114
901	Sometimes you want to share the same loop between multiple threads. This	1115	Sometimes you want to share the same loop between multiple threads. This
902	can be done relatively simply by putting mutex_lock/unlock calls around	1116	can be done relatively simply by putting mutex_lock/unlock calls around
903	each call to a libev function.	1117	each call to a libev function.
904		1118
905	However, C<ev_loop> can run an indefinite time, so it is not feasible to	1119	However, C<ev_run> can run an indefinite time, so it is not feasible
906	wait for it to return. One way around this is to wake up the loop via	1120	to wait for it to return. One way around this is to wake up the event
907	C<ev_unloop> and C<av_async_send>, another way is to set these I<release>	1121	loop via C<ev_break> and C<ev_async_send>, another way is to set these
908	and I<acquire> callbacks on the loop.	1122	I<release> and I<acquire> callbacks on the loop.
909		1123
910	When set, then C<release> will be called just before the thread is	1124	When set, then C<release> will be called just before the thread is
911	suspended waiting for new events, and C<acquire> is called just	1125	suspended waiting for new events, and C<acquire> is called just
912	afterwards.	1126	afterwards.
913		1127
…		…
916		1130
917	While event loop modifications are allowed between invocations of	1131	While event loop modifications are allowed between invocations of
918	C<release> and C<acquire> (that's their only purpose after all), no	1132	C<release> and C<acquire> (that's their only purpose after all), no
919	modifications done will affect the event loop, i.e. adding watchers will	1133	modifications done will affect the event loop, i.e. adding watchers will
920	have no effect on the set of file descriptors being watched, or the time	1134	have no effect on the set of file descriptors being watched, or the time
921	waited. USe an C<ev_async> watcher to wake up C<ev_loop> when you want it	1135	waited. Use an C<ev_async> watcher to wake up C<ev_run> when you want it
922	to take note of any changes you made.	1136	to take note of any changes you made.
923		1137
924	In theory, threads executing C<ev_loop> will be async-cancel safe between	1138	In theory, threads executing C<ev_run> will be async-cancel safe between
925	invocations of C<release> and C<acquire>.	1139	invocations of C<release> and C<acquire>.
926		1140
927	See also the locking example in the C<THREADS> section later in this	1141	See also the locking example in the C<THREADS> section later in this
928	document.	1142	document.
929		1143
930	=item ev_set_userdata (loop, void *data)	1144	=item ev_set_userdata (loop, void *data)
931		1145
932	=item ev_userdata (loop)	1146	=item void *ev_userdata (loop)
933		1147
934	Set and retrieve a single C<void *> associated with a loop. When	1148	Set and retrieve a single C<void *> associated with a loop. When
935	C<ev_set_userdata> has never been called, then C<ev_userdata> returns	1149	C<ev_set_userdata> has never been called, then C<ev_userdata> returns
936	C<0.>	1150	C<0>.
937		1151
938	These two functions can be used to associate arbitrary data with a loop,	1152	These two functions can be used to associate arbitrary data with a loop,
939	and are intended solely for the C<invoke_pending_cb>, C<release> and	1153	and are intended solely for the C<invoke_pending_cb>, C<release> and
940	C<acquire> callbacks described above, but of course can be (ab-)used for	1154	C<acquire> callbacks described above, but of course can be (ab-)used for
941	any other purpose as well.	1155	any other purpose as well.
942		1156
943	=item ev_loop_verify (loop)	1157	=item ev_verify (loop)
944		1158
945	This function only does something when C<EV_VERIFY> support has been	1159	This function only does something when C<EV_VERIFY> support has been
946	compiled in, which is the default for non-minimal builds. It tries to go	1160	compiled in, which is the default for non-minimal builds. It tries to go
947	through all internal structures and checks them for validity. If anything	1161	through all internal structures and checks them for validity. If anything
948	is found to be inconsistent, it will print an error message to standard	1162	is found to be inconsistent, it will print an error message to standard
…		…
959		1173
960	In the following description, uppercase C<TYPE> in names stands for the	1174	In the following description, uppercase C<TYPE> in names stands for the
961	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer	1175	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer
962	watchers and C<ev_io_start> for I/O watchers.	1176	watchers and C<ev_io_start> for I/O watchers.
963		1177
964	A watcher is a structure that you create and register to record your	1178	A watcher is an opaque structure that you allocate and register to record
965	interest in some event. For instance, if you want to wait for STDIN to	1179	your interest in some event. To make a concrete example, imagine you want
966	become readable, you would create an C<ev_io> watcher for that:	1180	to wait for STDIN to become readable, you would create an C<ev_io> watcher
		1181	for that:
967		1182
968	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)	1183	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)
969	{	1184	{
970	ev_io_stop (w);	1185	ev_io_stop (w);
971	ev_unloop (loop, EVUNLOOP_ALL);	1186	ev_break (loop, EVBREAK_ALL);
972	}	1187	}
973		1188
974	struct ev_loop *loop = ev_default_loop (0);	1189	struct ev_loop *loop = ev_default_loop (0);
975		1190
976	ev_io stdin_watcher;	1191	ev_io stdin_watcher;
977		1192
978	ev_init (&stdin_watcher, my_cb);	1193	ev_init (&stdin_watcher, my_cb);
979	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);	1194	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
980	ev_io_start (loop, &stdin_watcher);	1195	ev_io_start (loop, &stdin_watcher);
981		1196
982	ev_loop (loop, 0);	1197	ev_run (loop, 0);
983		1198
984	As you can see, you are responsible for allocating the memory for your	1199	As you can see, you are responsible for allocating the memory for your
985	watcher structures (and it is I<usually> a bad idea to do this on the	1200	watcher structures (and it is I<usually> a bad idea to do this on the
986	stack).	1201	stack).
987		1202
988	Each watcher has an associated watcher structure (called C<struct ev_TYPE>	1203	Each watcher has an associated watcher structure (called C<struct ev_TYPE>
989	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).	1204	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).
990		1205
991	Each watcher structure must be initialised by a call to C<ev_init	1206	Each watcher structure must be initialised by a call to C<ev_init (watcher
992	(watcher *, callback)>, which expects a callback to be provided. This	1207	*, callback)>, which expects a callback to be provided. This callback is
993	callback gets invoked each time the event occurs (or, in the case of I/O	1208	invoked each time the event occurs (or, in the case of I/O watchers, each
994	watchers, each time the event loop detects that the file descriptor given	1209	time the event loop detects that the file descriptor given is readable
995	is readable and/or writable).	1210	and/or writable).
996		1211
997	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>	1212	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>
998	macro to configure it, with arguments specific to the watcher type. There	1213	macro to configure it, with arguments specific to the watcher type. There
999	is also a macro to combine initialisation and setting in one call: C<<	1214	is also a macro to combine initialisation and setting in one call: C<<
1000	ev_TYPE_init (watcher *, callback, ...) >>.	1215	ev_TYPE_init (watcher *, callback, ...) >>.
…		…
1023	=item C<EV_WRITE>	1238	=item C<EV_WRITE>
1024		1239
1025	The file descriptor in the C<ev_io> watcher has become readable and/or	1240	The file descriptor in the C<ev_io> watcher has become readable and/or
1026	writable.	1241	writable.
1027		1242
1028	=item C<EV_TIMEOUT>	1243	=item C<EV_TIMER>
1029		1244
1030	The C<ev_timer> watcher has timed out.	1245	The C<ev_timer> watcher has timed out.
1031		1246
1032	=item C<EV_PERIODIC>	1247	=item C<EV_PERIODIC>
1033		1248
…		…
1051		1266
1052	=item C<EV_PREPARE>	1267	=item C<EV_PREPARE>
1053		1268
1054	=item C<EV_CHECK>	1269	=item C<EV_CHECK>
1055		1270
1056	All C<ev_prepare> watchers are invoked just I<before> C<ev_loop> starts	1271	All C<ev_prepare> watchers are invoked just I<before> C<ev_run> starts to
1057	to gather new events, and all C<ev_check> watchers are invoked just after	1272	gather new events, and all C<ev_check> watchers are queued (not invoked)
1058	C<ev_loop> has gathered them, but before it invokes any callbacks for any	1273	just after C<ev_run> has gathered them, but before it queues any callbacks
		1274	for any received events. That means C<ev_prepare> watchers are the last
		1275	watchers invoked before the event loop sleeps or polls for new events, and
		1276	C<ev_check> watchers will be invoked before any other watchers of the same
		1277	or lower priority within an event loop iteration.
		1278
1059	received events. Callbacks of both watcher types can start and stop as	1279	Callbacks of both watcher types can start and stop as many watchers as
1060	many watchers as they want, and all of them will be taken into account	1280	they want, and all of them will be taken into account (for example, a
1061	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	1281	C<ev_prepare> watcher might start an idle watcher to keep C<ev_run> from
1062	C<ev_loop> from blocking).	1282	blocking).
1063		1283
1064	=item C<EV_EMBED>	1284	=item C<EV_EMBED>
1065		1285
1066	The embedded event loop specified in the C<ev_embed> watcher needs attention.	1286	The embedded event loop specified in the C<ev_embed> watcher needs attention.
1067		1287
1068	=item C<EV_FORK>	1288	=item C<EV_FORK>
1069		1289
1070	The event loop has been resumed in the child process after fork (see	1290	The event loop has been resumed in the child process after fork (see
1071	C<ev_fork>).	1291	C<ev_fork>).
		1292
		1293	=item C<EV_CLEANUP>
		1294
		1295	The event loop is about to be destroyed (see C<ev_cleanup>).
1072		1296
1073	=item C<EV_ASYNC>	1297	=item C<EV_ASYNC>
1074		1298
1075	The given async watcher has been asynchronously notified (see C<ev_async>).	1299	The given async watcher has been asynchronously notified (see C<ev_async>).
1076		1300
…		…
1123		1347
1124	ev_io w;	1348	ev_io w;
1125	ev_init (&w, my_cb);	1349	ev_init (&w, my_cb);
1126	ev_io_set (&w, STDIN_FILENO, EV_READ);	1350	ev_io_set (&w, STDIN_FILENO, EV_READ);
1127		1351
1128	=item C<ev_TYPE_set> (ev_TYPE *, [args])	1352	=item C<ev_TYPE_set> (ev_TYPE *watcher, [args])
1129		1353
1130	This macro initialises the type-specific parts of a watcher. You need to	1354	This macro initialises the type-specific parts of a watcher. You need to
1131	call C<ev_init> at least once before you call this macro, but you can	1355	call C<ev_init> at least once before you call this macro, but you can
1132	call C<ev_TYPE_set> any number of times. You must not, however, call this	1356	call C<ev_TYPE_set> any number of times. You must not, however, call this
1133	macro on a watcher that is active (it can be pending, however, which is a	1357	macro on a watcher that is active (it can be pending, however, which is a
…		…
1146		1370
1147	Example: Initialise and set an C<ev_io> watcher in one step.	1371	Example: Initialise and set an C<ev_io> watcher in one step.
1148		1372
1149	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);	1373	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);
1150		1374
1151	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)	1375	=item C<ev_TYPE_start> (loop, ev_TYPE *watcher)
1152		1376
1153	Starts (activates) the given watcher. Only active watchers will receive	1377	Starts (activates) the given watcher. Only active watchers will receive
1154	events. If the watcher is already active nothing will happen.	1378	events. If the watcher is already active nothing will happen.
1155		1379
1156	Example: Start the C<ev_io> watcher that is being abused as example in this	1380	Example: Start the C<ev_io> watcher that is being abused as example in this
1157	whole section.	1381	whole section.
1158		1382
1159	ev_io_start (EV_DEFAULT_UC, &w);	1383	ev_io_start (EV_DEFAULT_UC, &w);
1160		1384
1161	=item C<ev_TYPE_stop> (loop *, ev_TYPE *watcher)	1385	=item C<ev_TYPE_stop> (loop, ev_TYPE *watcher)
1162		1386
1163	Stops the given watcher if active, and clears the pending status (whether	1387	Stops the given watcher if active, and clears the pending status (whether
1164	the watcher was active or not).	1388	the watcher was active or not).
1165		1389
1166	It is possible that stopped watchers are pending - for example,	1390	It is possible that stopped watchers are pending - for example,
…		…
1186		1410
1187	=item callback ev_cb (ev_TYPE *watcher)	1411	=item callback ev_cb (ev_TYPE *watcher)
1188		1412
1189	Returns the callback currently set on the watcher.	1413	Returns the callback currently set on the watcher.
1190		1414
1191	=item ev_cb_set (ev_TYPE *watcher, callback)	1415	=item ev_set_cb (ev_TYPE *watcher, callback)
1192		1416
1193	Change the callback. You can change the callback at virtually any time	1417	Change the callback. You can change the callback at virtually any time
1194	(modulo threads).	1418	(modulo threads).
1195		1419
1196	=item ev_set_priority (ev_TYPE *watcher, priority)	1420	=item ev_set_priority (ev_TYPE *watcher, int priority)
1197		1421
1198	=item int ev_priority (ev_TYPE *watcher)	1422	=item int ev_priority (ev_TYPE *watcher)
1199		1423
1200	Set and query the priority of the watcher. The priority is a small	1424	Set and query the priority of the watcher. The priority is a small
1201	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>	1425	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
…		…
1214	or might not have been clamped to the valid range.	1438	or might not have been clamped to the valid range.
1215		1439
1216	The default priority used by watchers when no priority has been set is	1440	The default priority used by watchers when no priority has been set is
1217	always C<0>, which is supposed to not be too high and not be too low :).	1441	always C<0>, which is supposed to not be too high and not be too low :).
1218		1442
1219	See L<WATCHER PRIORITY MODELS>, below, for a more thorough treatment of	1443	See L</WATCHER PRIORITY MODELS>, below, for a more thorough treatment of
1220	priorities.	1444	priorities.
1221		1445
1222	=item ev_invoke (loop, ev_TYPE *watcher, int revents)	1446	=item ev_invoke (loop, ev_TYPE *watcher, int revents)
1223		1447
1224	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither	1448	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
…		…
1233	watcher isn't pending it does nothing and returns C<0>.	1457	watcher isn't pending it does nothing and returns C<0>.
1234		1458
1235	Sometimes it can be useful to "poll" a watcher instead of waiting for its	1459	Sometimes it can be useful to "poll" a watcher instead of waiting for its
1236	callback to be invoked, which can be accomplished with this function.	1460	callback to be invoked, which can be accomplished with this function.
1237		1461
		1462	=item ev_feed_event (loop, ev_TYPE *watcher, int revents)
		1463
		1464	Feeds the given event set into the event loop, as if the specified event
		1465	had happened for the specified watcher (which must be a pointer to an
		1466	initialised but not necessarily started event watcher). Obviously you must
		1467	not free the watcher as long as it has pending events.
		1468
		1469	Stopping the watcher, letting libev invoke it, or calling
		1470	C<ev_clear_pending> will clear the pending event, even if the watcher was
		1471	not started in the first place.
		1472
		1473	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
		1474	functions that do not need a watcher.
		1475
1238	=back	1476	=back
1239		1477
		1478	See also the L</ASSOCIATING CUSTOM DATA WITH A WATCHER> and L</BUILDING YOUR
		1479	OWN COMPOSITE WATCHERS> idioms.
1240		1480
1241	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	1481	=head2 WATCHER STATES
1242		1482
1243	Each watcher has, by default, a member C<void *data> that you can change	1483	There are various watcher states mentioned throughout this manual -
1244	and read at any time: libev will completely ignore it. This can be used	1484	active, pending and so on. In this section these states and the rules to
1245	to associate arbitrary data with your watcher. If you need more data and	1485	transition between them will be described in more detail - and while these
1246	don't want to allocate memory and store a pointer to it in that data	1486	rules might look complicated, they usually do "the right thing".
1247	member, you can also "subclass" the watcher type and provide your own
1248	data:
1249		1487
1250	struct my_io	1488	=over 4
1251	{
1252	ev_io io;
1253	int otherfd;
1254	void *somedata;
1255	struct whatever *mostinteresting;
1256	};
1257		1489
1258	...	1490	=item initialised
1259	struct my_io w;
1260	ev_io_init (&w.io, my_cb, fd, EV_READ);
1261		1491
1262	And since your callback will be called with a pointer to the watcher, you	1492	Before a watcher can be registered with the event loop it has to be
1263	can cast it back to your own type:	1493	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
		1494	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
1264		1495
1265	static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)	1496	In this state it is simply some block of memory that is suitable for
1266	{	1497	use in an event loop. It can be moved around, freed, reused etc. at
1267	struct my_io *w = (struct my_io *)w_;	1498	will - as long as you either keep the memory contents intact, or call
1268	...	1499	C<ev_TYPE_init> again.
1269	}
1270		1500
1271	More interesting and less C-conformant ways of casting your callback type	1501	=item started/running/active
1272	instead have been omitted.
1273		1502
1274	Another common scenario is to use some data structure with multiple	1503	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
1275	embedded watchers:	1504	property of the event loop, and is actively waiting for events. While in
		1505	this state it cannot be accessed (except in a few documented ways), moved,
		1506	freed or anything else - the only legal thing is to keep a pointer to it,
		1507	and call libev functions on it that are documented to work on active watchers.
1276		1508
1277	struct my_biggy	1509	=item pending
1278	{
1279	int some_data;
1280	ev_timer t1;
1281	ev_timer t2;
1282	}
1283		1510
1284	In this case getting the pointer to C<my_biggy> is a bit more	1511	If a watcher is active and libev determines that an event it is interested
1285	complicated: Either you store the address of your C<my_biggy> struct	1512	in has occurred (such as a timer expiring), it will become pending. It will
1286	in the C<data> member of the watcher (for woozies), or you need to use	1513	stay in this pending state until either it is stopped or its callback is
1287	some pointer arithmetic using C<offsetof> inside your watchers (for real	1514	about to be invoked, so it is not normally pending inside the watcher
1288	programmers):	1515	callback.
1289		1516
1290	#include <stddef.h>	1517	The watcher might or might not be active while it is pending (for example,
		1518	an expired non-repeating timer can be pending but no longer active). If it
		1519	is stopped, it can be freely accessed (e.g. by calling C<ev_TYPE_set>),
		1520	but it is still property of the event loop at this time, so cannot be
		1521	moved, freed or reused. And if it is active the rules described in the
		1522	previous item still apply.
1291		1523
1292	static void	1524	It is also possible to feed an event on a watcher that is not active (e.g.
1293	t1_cb (EV_P_ ev_timer *w, int revents)	1525	via C<ev_feed_event>), in which case it becomes pending without being
1294	{	1526	active.
1295	struct my_biggy big = (struct my_biggy *)
1296	(((char *)w) - offsetof (struct my_biggy, t1));
1297	}
1298		1527
1299	static void	1528	=item stopped
1300	t2_cb (EV_P_ ev_timer *w, int revents)	1529
1301	{	1530	A watcher can be stopped implicitly by libev (in which case it might still
1302	struct my_biggy big = (struct my_biggy *)	1531	be pending), or explicitly by calling its C<ev_TYPE_stop> function. The
1303	(((char *)w) - offsetof (struct my_biggy, t2));	1532	latter will clear any pending state the watcher might be in, regardless
1304	}	1533	of whether it was active or not, so stopping a watcher explicitly before
		1534	freeing it is often a good idea.
		1535
		1536	While stopped (and not pending) the watcher is essentially in the
		1537	initialised state, that is, it can be reused, moved, modified in any way
		1538	you wish (but when you trash the memory block, you need to C<ev_TYPE_init>
		1539	it again).
		1540
		1541	=back
1305		1542
1306	=head2 WATCHER PRIORITY MODELS	1543	=head2 WATCHER PRIORITY MODELS
1307		1544
1308	Many event loops support I<watcher priorities>, which are usually small	1545	Many event loops support I<watcher priorities>, which are usually small
1309	integers that influence the ordering of event callback invocation	1546	integers that influence the ordering of event callback invocation
1310	between watchers in some way, all else being equal.	1547	between watchers in some way, all else being equal.
1311		1548
1312	In libev, Watcher priorities can be set using C<ev_set_priority>. See its	1549	In libev, watcher priorities can be set using C<ev_set_priority>. See its
1313	description for the more technical details such as the actual priority	1550	description for the more technical details such as the actual priority
1314	range.	1551	range.
1315		1552
1316	There are two common ways how these these priorities are being interpreted	1553	There are two common ways how these these priorities are being interpreted
1317	by event loops:	1554	by event loops:
…		…
1352		1589
1353	For example, to emulate how many other event libraries handle priorities,	1590	For example, to emulate how many other event libraries handle priorities,
1354	you can associate an C<ev_idle> watcher to each such watcher, and in	1591	you can associate an C<ev_idle> watcher to each such watcher, and in
1355	the normal watcher callback, you just start the idle watcher. The real	1592	the normal watcher callback, you just start the idle watcher. The real
1356	processing is done in the idle watcher callback. This causes libev to	1593	processing is done in the idle watcher callback. This causes libev to
1357	continously poll and process kernel event data for the watcher, but when	1594	continuously poll and process kernel event data for the watcher, but when
1358	the lock-out case is known to be rare (which in turn is rare :), this is	1595	the lock-out case is known to be rare (which in turn is rare :), this is
1359	workable.	1596	workable.
1360		1597
1361	Usually, however, the lock-out model implemented that way will perform	1598	Usually, however, the lock-out model implemented that way will perform
1362	miserably under the type of load it was designed to handle. In that case,	1599	miserably under the type of load it was designed to handle. In that case,
…		…
1376	{	1613	{
1377	// stop the I/O watcher, we received the event, but	1614	// stop the I/O watcher, we received the event, but
1378	// are not yet ready to handle it.	1615	// are not yet ready to handle it.
1379	ev_io_stop (EV_A_ w);	1616	ev_io_stop (EV_A_ w);
1380		1617
1381	// start the idle watcher to ahndle the actual event.	1618	// start the idle watcher to handle the actual event.
1382	// it will not be executed as long as other watchers	1619	// it will not be executed as long as other watchers
1383	// with the default priority are receiving events.	1620	// with the default priority are receiving events.
1384	ev_idle_start (EV_A_ &idle);	1621	ev_idle_start (EV_A_ &idle);
1385	}	1622	}
1386		1623
…		…
1436	In general you can register as many read and/or write event watchers per	1673	In general you can register as many read and/or write event watchers per
1437	fd as you want (as long as you don't confuse yourself). Setting all file	1674	fd as you want (as long as you don't confuse yourself). Setting all file
1438	descriptors to non-blocking mode is also usually a good idea (but not	1675	descriptors to non-blocking mode is also usually a good idea (but not
1439	required if you know what you are doing).	1676	required if you know what you are doing).
1440		1677
1441	If you cannot use non-blocking mode, then force the use of a
1442	known-to-be-good backend (at the time of this writing, this includes only
1443	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>). The same applies to file
1444	descriptors for which non-blocking operation makes no sense (such as
1445	files) - libev doesn't guarentee any specific behaviour in that case.
1446
1447	Another thing you have to watch out for is that it is quite easy to	1678	Another thing you have to watch out for is that it is quite easy to
1448	receive "spurious" readiness notifications, that is your callback might	1679	receive "spurious" readiness notifications, that is, your callback might
1449	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1680	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
1450	because there is no data. Not only are some backends known to create a	1681	because there is no data. It is very easy to get into this situation even
1451	lot of those (for example Solaris ports), it is very easy to get into	1682	with a relatively standard program structure. Thus it is best to always
1452	this situation even with a relatively standard program structure. Thus	1683	use non-blocking I/O: An extra C<read>(2) returning C<EAGAIN> is far
1453	it is best to always use non-blocking I/O: An extra C<read>(2) returning
1454	C<EAGAIN> is far preferable to a program hanging until some data arrives.	1684	preferable to a program hanging until some data arrives.
1455		1685
1456	If you cannot run the fd in non-blocking mode (for example you should	1686	If you cannot run the fd in non-blocking mode (for example you should
1457	not play around with an Xlib connection), then you have to separately	1687	not play around with an Xlib connection), then you have to separately
1458	re-test whether a file descriptor is really ready with a known-to-be good	1688	re-test whether a file descriptor is really ready with a known-to-be good
1459	interface such as poll (fortunately in our Xlib example, Xlib already	1689	interface such as poll (fortunately in the case of Xlib, it already does
1460	does this on its own, so its quite safe to use). Some people additionally	1690	this on its own, so its quite safe to use). Some people additionally
1461	use C<SIGALRM> and an interval timer, just to be sure you won't block	1691	use C<SIGALRM> and an interval timer, just to be sure you won't block
1462	indefinitely.	1692	indefinitely.
1463		1693
1464	But really, best use non-blocking mode.	1694	But really, best use non-blocking mode.
1465		1695
1466	=head3 The special problem of disappearing file descriptors	1696	=head3 The special problem of disappearing file descriptors
1467		1697
1468	Some backends (e.g. kqueue, epoll) need to be told about closing a file	1698	Some backends (e.g. kqueue, epoll, linuxaio) need to be told about closing
1469	descriptor (either due to calling C<close> explicitly or any other means,	1699	a file descriptor (either due to calling C<close> explicitly or any other
1470	such as C<dup2>). The reason is that you register interest in some file	1700	means, such as C<dup2>). The reason is that you register interest in some
1471	descriptor, but when it goes away, the operating system will silently drop	1701	file descriptor, but when it goes away, the operating system will silently
1472	this interest. If another file descriptor with the same number then is	1702	drop this interest. If another file descriptor with the same number then
1473	registered with libev, there is no efficient way to see that this is, in	1703	is registered with libev, there is no efficient way to see that this is,
1474	fact, a different file descriptor.	1704	in fact, a different file descriptor.
1475		1705
1476	To avoid having to explicitly tell libev about such cases, libev follows	1706	To avoid having to explicitly tell libev about such cases, libev follows
1477	the following policy: Each time C<ev_io_set> is being called, libev	1707	the following policy: Each time C<ev_io_set> is being called, libev
1478	will assume that this is potentially a new file descriptor, otherwise	1708	will assume that this is potentially a new file descriptor, otherwise
1479	it is assumed that the file descriptor stays the same. That means that	1709	it is assumed that the file descriptor stays the same. That means that
…		…
1493		1723
1494	There is no workaround possible except not registering events	1724	There is no workaround possible except not registering events
1495	for potentially C<dup ()>'ed file descriptors, or to resort to	1725	for potentially C<dup ()>'ed file descriptors, or to resort to
1496	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.	1726	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1497		1727
		1728	=head3 The special problem of files
		1729
		1730	Many people try to use C<select> (or libev) on file descriptors
		1731	representing files, and expect it to become ready when their program
		1732	doesn't block on disk accesses (which can take a long time on their own).
		1733
		1734	However, this cannot ever work in the "expected" way - you get a readiness
		1735	notification as soon as the kernel knows whether and how much data is
		1736	there, and in the case of open files, that's always the case, so you
		1737	always get a readiness notification instantly, and your read (or possibly
		1738	write) will still block on the disk I/O.
		1739
		1740	Another way to view it is that in the case of sockets, pipes, character
		1741	devices and so on, there is another party (the sender) that delivers data
		1742	on its own, but in the case of files, there is no such thing: the disk
		1743	will not send data on its own, simply because it doesn't know what you
		1744	wish to read - you would first have to request some data.
		1745
		1746	Since files are typically not-so-well supported by advanced notification
		1747	mechanism, libev tries hard to emulate POSIX behaviour with respect
		1748	to files, even though you should not use it. The reason for this is
		1749	convenience: sometimes you want to watch STDIN or STDOUT, which is
		1750	usually a tty, often a pipe, but also sometimes files or special devices
		1751	(for example, C<epoll> on Linux works with F</dev/random> but not with
		1752	F</dev/urandom>), and even though the file might better be served with
		1753	asynchronous I/O instead of with non-blocking I/O, it is still useful when
		1754	it "just works" instead of freezing.
		1755
		1756	So avoid file descriptors pointing to files when you know it (e.g. use
		1757	libeio), but use them when it is convenient, e.g. for STDIN/STDOUT, or
		1758	when you rarely read from a file instead of from a socket, and want to
		1759	reuse the same code path.
		1760
1498	=head3 The special problem of fork	1761	=head3 The special problem of fork
1499		1762
1500	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit	1763	Some backends (epoll, kqueue, linuxaio, iouring) do not support C<fork ()>
1501	useless behaviour. Libev fully supports fork, but needs to be told about	1764	at all or exhibit useless behaviour. Libev fully supports fork, but needs
1502	it in the child.	1765	to be told about it in the child if you want to continue to use it in the
		1766	child.
1503		1767
1504	To support fork in your programs, you either have to call	1768	To support fork in your child processes, you have to call C<ev_loop_fork
1505	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,	1769	()> after a fork in the child, enable C<EVFLAG_FORKCHECK>, or resort to
1506	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or	1770	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1507	C<EVBACKEND_POLL>.
1508		1771
1509	=head3 The special problem of SIGPIPE	1772	=head3 The special problem of SIGPIPE
1510		1773
1511	While not really specific to libev, it is easy to forget about C<SIGPIPE>:	1774	While not really specific to libev, it is easy to forget about C<SIGPIPE>:
1512	when writing to a pipe whose other end has been closed, your program gets	1775	when writing to a pipe whose other end has been closed, your program gets
…		…
1515		1778
1516	So when you encounter spurious, unexplained daemon exits, make sure you	1779	So when you encounter spurious, unexplained daemon exits, make sure you
1517	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon	1780	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
1518	somewhere, as that would have given you a big clue).	1781	somewhere, as that would have given you a big clue).
1519		1782
		1783	=head3 The special problem of accept()ing when you can't
		1784
		1785	Many implementations of the POSIX C<accept> function (for example,
		1786	found in post-2004 Linux) have the peculiar behaviour of not removing a
		1787	connection from the pending queue in all error cases.
		1788
		1789	For example, larger servers often run out of file descriptors (because
		1790	of resource limits), causing C<accept> to fail with C<ENFILE> but not
		1791	rejecting the connection, leading to libev signalling readiness on
		1792	the next iteration again (the connection still exists after all), and
		1793	typically causing the program to loop at 100% CPU usage.
		1794
		1795	Unfortunately, the set of errors that cause this issue differs between
		1796	operating systems, there is usually little the app can do to remedy the
		1797	situation, and no known thread-safe method of removing the connection to
		1798	cope with overload is known (to me).
		1799
		1800	One of the easiest ways to handle this situation is to just ignore it
		1801	- when the program encounters an overload, it will just loop until the
		1802	situation is over. While this is a form of busy waiting, no OS offers an
		1803	event-based way to handle this situation, so it's the best one can do.
		1804
		1805	A better way to handle the situation is to log any errors other than
		1806	C<EAGAIN> and C<EWOULDBLOCK>, making sure not to flood the log with such
		1807	messages, and continue as usual, which at least gives the user an idea of
		1808	what could be wrong ("raise the ulimit!"). For extra points one could stop
		1809	the C<ev_io> watcher on the listening fd "for a while", which reduces CPU
		1810	usage.
		1811
		1812	If your program is single-threaded, then you could also keep a dummy file
		1813	descriptor for overload situations (e.g. by opening F</dev/null>), and
		1814	when you run into C<ENFILE> or C<EMFILE>, close it, run C<accept>,
		1815	close that fd, and create a new dummy fd. This will gracefully refuse
		1816	clients under typical overload conditions.
		1817
		1818	The last way to handle it is to simply log the error and C<exit>, as
		1819	is often done with C<malloc> failures, but this results in an easy
		1820	opportunity for a DoS attack.
1520		1821
1521	=head3 Watcher-Specific Functions	1822	=head3 Watcher-Specific Functions
1522		1823
1523	=over 4	1824	=over 4
1524		1825
…		…
1556	...	1857	...
1557	struct ev_loop *loop = ev_default_init (0);	1858	struct ev_loop *loop = ev_default_init (0);
1558	ev_io stdin_readable;	1859	ev_io stdin_readable;
1559	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);	1860	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
1560	ev_io_start (loop, &stdin_readable);	1861	ev_io_start (loop, &stdin_readable);
1561	ev_loop (loop, 0);	1862	ev_run (loop, 0);
1562		1863
1563		1864
1564	=head2 C<ev_timer> - relative and optionally repeating timeouts	1865	=head2 C<ev_timer> - relative and optionally repeating timeouts
1565		1866
1566	Timer watchers are simple relative timers that generate an event after a	1867	Timer watchers are simple relative timers that generate an event after a
…		…
1572	detecting time jumps is hard, and some inaccuracies are unavoidable (the	1873	detecting time jumps is hard, and some inaccuracies are unavoidable (the
1573	monotonic clock option helps a lot here).	1874	monotonic clock option helps a lot here).
1574		1875
1575	The callback is guaranteed to be invoked only I<after> its timeout has	1876	The callback is guaranteed to be invoked only I<after> its timeout has
1576	passed (not I<at>, so on systems with very low-resolution clocks this	1877	passed (not I<at>, so on systems with very low-resolution clocks this
1577	might introduce a small delay). If multiple timers become ready during the	1878	might introduce a small delay, see "the special problem of being too
		1879	early", below). If multiple timers become ready during the same loop
1578	same loop iteration then the ones with earlier time-out values are invoked	1880	iteration then the ones with earlier time-out values are invoked before
1579	before ones of the same priority with later time-out values (but this is	1881	ones of the same priority with later time-out values (but this is no
1580	no longer true when a callback calls C<ev_loop> recursively).	1882	longer true when a callback calls C<ev_run> recursively).
1581		1883
1582	=head3 Be smart about timeouts	1884	=head3 Be smart about timeouts
1583		1885
1584	Many real-world problems involve some kind of timeout, usually for error	1886	Many real-world problems involve some kind of timeout, usually for error
1585	recovery. A typical example is an HTTP request - if the other side hangs,	1887	recovery. A typical example is an HTTP request - if the other side hangs,
…		…
1660		1962
1661	In this case, it would be more efficient to leave the C<ev_timer> alone,	1963	In this case, it would be more efficient to leave the C<ev_timer> alone,
1662	but remember the time of last activity, and check for a real timeout only	1964	but remember the time of last activity, and check for a real timeout only
1663	within the callback:	1965	within the callback:
1664		1966
		1967	ev_tstamp timeout = 60.;
1665	ev_tstamp last_activity; // time of last activity	1968	ev_tstamp last_activity; // time of last activity
		1969	ev_timer timer;
1666		1970
1667	static void	1971	static void
1668	callback (EV_P_ ev_timer *w, int revents)	1972	callback (EV_P_ ev_timer *w, int revents)
1669	{	1973	{
1670	ev_tstamp now = ev_now (EV_A);	1974	// calculate when the timeout would happen
1671	ev_tstamp timeout = last_activity + 60.;	1975	ev_tstamp after = last_activity - ev_now (EV_A) + timeout;
1672		1976
1673	// if last_activity + 60. is older than now, we did time out	1977	// if negative, it means we the timeout already occurred
1674	if (timeout < now)	1978	if (after < 0.)
1675	{	1979	{
1676	// timeout occured, take action	1980	// timeout occurred, take action
1677	}	1981	}
1678	else	1982	else
1679	{	1983	{
1680	// callback was invoked, but there was some activity, re-arm	1984	// callback was invoked, but there was some recent
1681	// the watcher to fire in last_activity + 60, which is	1985	// activity. simply restart the timer to time out
1682	// guaranteed to be in the future, so "again" is positive:	1986	// after "after" seconds, which is the earliest time
1683	w->repeat = timeout - now;	1987	// the timeout can occur.
		1988	ev_timer_set (w, after, 0.);
1684	ev_timer_again (EV_A_ w);	1989	ev_timer_start (EV_A_ w);
1685	}	1990	}
1686	}	1991	}
1687		1992
1688	To summarise the callback: first calculate the real timeout (defined	1993	To summarise the callback: first calculate in how many seconds the
1689	as "60 seconds after the last activity"), then check if that time has	1994	timeout will occur (by calculating the absolute time when it would occur,
1690	been reached, which means something I<did>, in fact, time out. Otherwise	1995	C<last_activity + timeout>, and subtracting the current time, C<ev_now
1691	the callback was invoked too early (C<timeout> is in the future), so	1996	(EV_A)> from that).
1692	re-schedule the timer to fire at that future time, to see if maybe we have
1693	a timeout then.
1694		1997
1695	Note how C<ev_timer_again> is used, taking advantage of the	1998	If this value is negative, then we are already past the timeout, i.e. we
1696	C<ev_timer_again> optimisation when the timer is already running.	1999	timed out, and need to do whatever is needed in this case.
		2000
		2001	Otherwise, we now the earliest time at which the timeout would trigger,
		2002	and simply start the timer with this timeout value.
		2003
		2004	In other words, each time the callback is invoked it will check whether
		2005	the timeout occurred. If not, it will simply reschedule itself to check
		2006	again at the earliest time it could time out. Rinse. Repeat.
1697		2007
1698	This scheme causes more callback invocations (about one every 60 seconds	2008	This scheme causes more callback invocations (about one every 60 seconds
1699	minus half the average time between activity), but virtually no calls to	2009	minus half the average time between activity), but virtually no calls to
1700	libev to change the timeout.	2010	libev to change the timeout.
1701		2011
1702	To start the timer, simply initialise the watcher and set C<last_activity>	2012	To start the machinery, simply initialise the watcher and set
1703	to the current time (meaning we just have some activity :), then call the	2013	C<last_activity> to the current time (meaning there was some activity just
1704	callback, which will "do the right thing" and start the timer:	2014	now), then call the callback, which will "do the right thing" and start
		2015	the timer:
1705		2016
		2017	last_activity = ev_now (EV_A);
1706	ev_init (timer, callback);	2018	ev_init (&timer, callback);
1707	last_activity = ev_now (loop);	2019	callback (EV_A_ &timer, 0);
1708	callback (loop, timer, EV_TIMEOUT);
1709		2020
1710	And when there is some activity, simply store the current time in	2021	When there is some activity, simply store the current time in
1711	C<last_activity>, no libev calls at all:	2022	C<last_activity>, no libev calls at all:
1712		2023
		2024	if (activity detected)
1713	last_actiivty = ev_now (loop);	2025	last_activity = ev_now (EV_A);
		2026
		2027	When your timeout value changes, then the timeout can be changed by simply
		2028	providing a new value, stopping the timer and calling the callback, which
		2029	will again do the right thing (for example, time out immediately :).
		2030
		2031	timeout = new_value;
		2032	ev_timer_stop (EV_A_ &timer);
		2033	callback (EV_A_ &timer, 0);
1714		2034
1715	This technique is slightly more complex, but in most cases where the	2035	This technique is slightly more complex, but in most cases where the
1716	time-out is unlikely to be triggered, much more efficient.	2036	time-out is unlikely to be triggered, much more efficient.
1717
1718	Changing the timeout is trivial as well (if it isn't hard-coded in the
1719	callback :) - just change the timeout and invoke the callback, which will
1720	fix things for you.
1721		2037
1722	=item 4. Wee, just use a double-linked list for your timeouts.	2038	=item 4. Wee, just use a double-linked list for your timeouts.
1723		2039
1724	If there is not one request, but many thousands (millions...), all	2040	If there is not one request, but many thousands (millions...), all
1725	employing some kind of timeout with the same timeout value, then one can	2041	employing some kind of timeout with the same timeout value, then one can
…		…
1752	Method #1 is almost always a bad idea, and buys you nothing. Method #4 is	2068	Method #1 is almost always a bad idea, and buys you nothing. Method #4 is
1753	rather complicated, but extremely efficient, something that really pays	2069	rather complicated, but extremely efficient, something that really pays
1754	off after the first million or so of active timers, i.e. it's usually	2070	off after the first million or so of active timers, i.e. it's usually
1755	overkill :)	2071	overkill :)
1756		2072
		2073	=head3 The special problem of being too early
		2074
		2075	If you ask a timer to call your callback after three seconds, then
		2076	you expect it to be invoked after three seconds - but of course, this
		2077	cannot be guaranteed to infinite precision. Less obviously, it cannot be
		2078	guaranteed to any precision by libev - imagine somebody suspending the
		2079	process with a STOP signal for a few hours for example.
		2080
		2081	So, libev tries to invoke your callback as soon as possible I<after> the
		2082	delay has occurred, but cannot guarantee this.
		2083
		2084	A less obvious failure mode is calling your callback too early: many event
		2085	loops compare timestamps with a "elapsed delay >= requested delay", but
		2086	this can cause your callback to be invoked much earlier than you would
		2087	expect.
		2088
		2089	To see why, imagine a system with a clock that only offers full second
		2090	resolution (think windows if you can't come up with a broken enough OS
		2091	yourself). If you schedule a one-second timer at the time 500.9, then the
		2092	event loop will schedule your timeout to elapse at a system time of 500
		2093	(500.9 truncated to the resolution) + 1, or 501.
		2094
		2095	If an event library looks at the timeout 0.1s later, it will see "501 >=
		2096	501" and invoke the callback 0.1s after it was started, even though a
		2097	one-second delay was requested - this is being "too early", despite best
		2098	intentions.
		2099
		2100	This is the reason why libev will never invoke the callback if the elapsed
		2101	delay equals the requested delay, but only when the elapsed delay is
		2102	larger than the requested delay. In the example above, libev would only invoke
		2103	the callback at system time 502, or 1.1s after the timer was started.
		2104
		2105	So, while libev cannot guarantee that your callback will be invoked
		2106	exactly when requested, it I<can> and I<does> guarantee that the requested
		2107	delay has actually elapsed, or in other words, it always errs on the "too
		2108	late" side of things.
		2109
1757	=head3 The special problem of time updates	2110	=head3 The special problem of time updates
1758		2111
1759	Establishing the current time is a costly operation (it usually takes at	2112	Establishing the current time is a costly operation (it usually takes
1760	least two system calls): EV therefore updates its idea of the current	2113	at least one system call): EV therefore updates its idea of the current
1761	time only before and after C<ev_loop> collects new events, which causes a	2114	time only before and after C<ev_run> collects new events, which causes a
1762	growing difference between C<ev_now ()> and C<ev_time ()> when handling	2115	growing difference between C<ev_now ()> and C<ev_time ()> when handling
1763	lots of events in one iteration.	2116	lots of events in one iteration.
1764		2117
1765	The relative timeouts are calculated relative to the C<ev_now ()>	2118	The relative timeouts are calculated relative to the C<ev_now ()>
1766	time. This is usually the right thing as this timestamp refers to the time	2119	time. This is usually the right thing as this timestamp refers to the time
1767	of the event triggering whatever timeout you are modifying/starting. If	2120	of the event triggering whatever timeout you are modifying/starting. If
1768	you suspect event processing to be delayed and you I<need> to base the	2121	you suspect event processing to be delayed and you I<need> to base the
1769	timeout on the current time, use something like this to adjust for this:	2122	timeout on the current time, use something like the following to adjust
		2123	for it:
1770		2124
1771	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);	2125	ev_timer_set (&timer, after + (ev_time () - ev_now ()), 0.);
1772		2126
1773	If the event loop is suspended for a long time, you can also force an	2127	If the event loop is suspended for a long time, you can also force an
1774	update of the time returned by C<ev_now ()> by calling C<ev_now_update	2128	update of the time returned by C<ev_now ()> by calling C<ev_now_update
1775	()>.	2129	()>, although that will push the event time of all outstanding events
		2130	further into the future.
		2131
		2132	=head3 The special problem of unsynchronised clocks
		2133
		2134	Modern systems have a variety of clocks - libev itself uses the normal
		2135	"wall clock" clock and, if available, the monotonic clock (to avoid time
		2136	jumps).
		2137
		2138	Neither of these clocks is synchronised with each other or any other clock
		2139	on the system, so C<ev_time ()> might return a considerably different time
		2140	than C<gettimeofday ()> or C<time ()>. On a GNU/Linux system, for example,
		2141	a call to C<gettimeofday> might return a second count that is one higher
		2142	than a directly following call to C<time>.
		2143
		2144	The moral of this is to only compare libev-related timestamps with
		2145	C<ev_time ()> and C<ev_now ()>, at least if you want better precision than
		2146	a second or so.
		2147
		2148	One more problem arises due to this lack of synchronisation: if libev uses
		2149	the system monotonic clock and you compare timestamps from C<ev_time>
		2150	or C<ev_now> from when you started your timer and when your callback is
		2151	invoked, you will find that sometimes the callback is a bit "early".
		2152
		2153	This is because C<ev_timer>s work in real time, not wall clock time, so
		2154	libev makes sure your callback is not invoked before the delay happened,
		2155	I<measured according to the real time>, not the system clock.
		2156
		2157	If your timeouts are based on a physical timescale (e.g. "time out this
		2158	connection after 100 seconds") then this shouldn't bother you as it is
		2159	exactly the right behaviour.
		2160
		2161	If you want to compare wall clock/system timestamps to your timers, then
		2162	you need to use C<ev_periodic>s, as these are based on the wall clock
		2163	time, where your comparisons will always generate correct results.
1776		2164
1777	=head3 The special problems of suspended animation	2165	=head3 The special problems of suspended animation
1778		2166
1779	When you leave the server world it is quite customary to hit machines that	2167	When you leave the server world it is quite customary to hit machines that
1780	can suspend/hibernate - what happens to the clocks during such a suspend?	2168	can suspend/hibernate - what happens to the clocks during such a suspend?
…		…
1810		2198
1811	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	2199	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
1812		2200
1813	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)	2201	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)
1814		2202
1815	Configure the timer to trigger after C<after> seconds. If C<repeat>	2203	Configure the timer to trigger after C<after> seconds (fractional and
1816	is C<0.>, then it will automatically be stopped once the timeout is	2204	negative values are supported). If C<repeat> is C<0.>, then it will
1817	reached. If it is positive, then the timer will automatically be	2205	automatically be stopped once the timeout is reached. If it is positive,
1818	configured to trigger again C<repeat> seconds later, again, and again,	2206	then the timer will automatically be configured to trigger again C<repeat>
1819	until stopped manually.	2207	seconds later, again, and again, until stopped manually.
1820		2208
1821	The timer itself will do a best-effort at avoiding drift, that is, if	2209	The timer itself will do a best-effort at avoiding drift, that is, if
1822	you configure a timer to trigger every 10 seconds, then it will normally	2210	you configure a timer to trigger every 10 seconds, then it will normally
1823	trigger at exactly 10 second intervals. If, however, your program cannot	2211	trigger at exactly 10 second intervals. If, however, your program cannot
1824	keep up with the timer (because it takes longer than those 10 seconds to	2212	keep up with the timer (because it takes longer than those 10 seconds to
1825	do stuff) the timer will not fire more than once per event loop iteration.	2213	do stuff) the timer will not fire more than once per event loop iteration.
1826		2214
1827	=item ev_timer_again (loop, ev_timer *)	2215	=item ev_timer_again (loop, ev_timer *)
1828		2216
1829	This will act as if the timer timed out and restart it again if it is	2217	This will act as if the timer timed out, and restarts it again if it is
1830	repeating. The exact semantics are:	2218	repeating. It basically works like calling C<ev_timer_stop>, updating the
		2219	timeout to the C<repeat> value and calling C<ev_timer_start>.
1831		2220
		2221	The exact semantics are as in the following rules, all of which will be
		2222	applied to the watcher:
		2223
		2224	=over 4
		2225
1832	If the timer is pending, its pending status is cleared.	2226	=item If the timer is pending, the pending status is always cleared.
1833		2227
1834	If the timer is started but non-repeating, stop it (as if it timed out).	2228	=item If the timer is started but non-repeating, stop it (as if it timed
		2229	out, without invoking it).
1835		2230
1836	If the timer is repeating, either start it if necessary (with the	2231	=item If the timer is repeating, make the C<repeat> value the new timeout
1837	C<repeat> value), or reset the running timer to the C<repeat> value.	2232	and start the timer, if necessary.
1838		2233
		2234	=back
		2235
1839	This sounds a bit complicated, see L<Be smart about timeouts>, above, for a	2236	This sounds a bit complicated, see L</Be smart about timeouts>, above, for a
1840	usage example.	2237	usage example.
1841		2238
1842	=item ev_timer_remaining (loop, ev_timer *)	2239	=item ev_tstamp ev_timer_remaining (loop, ev_timer *)
1843		2240
1844	Returns the remaining time until a timer fires. If the timer is active,	2241	Returns the remaining time until a timer fires. If the timer is active,
1845	then this time is relative to the current event loop time, otherwise it's	2242	then this time is relative to the current event loop time, otherwise it's
1846	the timeout value currently configured.	2243	the timeout value currently configured.
1847		2244
1848	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns	2245	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns
1849	C<5>. When the timer is started and one second passes, C<ev_timer_remain>	2246	C<5>. When the timer is started and one second passes, C<ev_timer_remaining>
1850	will return C<4>. When the timer expires and is restarted, it will return	2247	will return C<4>. When the timer expires and is restarted, it will return
1851	roughly C<7> (likely slightly less as callback invocation takes some time,	2248	roughly C<7> (likely slightly less as callback invocation takes some time,
1852	too), and so on.	2249	too), and so on.
1853		2250
1854	=item ev_tstamp repeat [read-write]	2251	=item ev_tstamp repeat [read-write]
…		…
1883	}	2280	}
1884		2281
1885	ev_timer mytimer;	2282	ev_timer mytimer;
1886	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */	2283	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
1887	ev_timer_again (&mytimer); /* start timer */	2284	ev_timer_again (&mytimer); /* start timer */
1888	ev_loop (loop, 0);	2285	ev_run (loop, 0);
1889		2286
1890	// and in some piece of code that gets executed on any "activity":	2287	// and in some piece of code that gets executed on any "activity":
1891	// reset the timeout to start ticking again at 10 seconds	2288	// reset the timeout to start ticking again at 10 seconds
1892	ev_timer_again (&mytimer);	2289	ev_timer_again (&mytimer);
1893		2290
…		…
1897	Periodic watchers are also timers of a kind, but they are very versatile	2294	Periodic watchers are also timers of a kind, but they are very versatile
1898	(and unfortunately a bit complex).	2295	(and unfortunately a bit complex).
1899		2296
1900	Unlike C<ev_timer>, periodic watchers are not based on real time (or	2297	Unlike C<ev_timer>, periodic watchers are not based on real time (or
1901	relative time, the physical time that passes) but on wall clock time	2298	relative time, the physical time that passes) but on wall clock time
1902	(absolute time, the thing you can read on your calender or clock). The	2299	(absolute time, the thing you can read on your calendar or clock). The
1903	difference is that wall clock time can run faster or slower than real	2300	difference is that wall clock time can run faster or slower than real
1904	time, and time jumps are not uncommon (e.g. when you adjust your	2301	time, and time jumps are not uncommon (e.g. when you adjust your
1905	wrist-watch).	2302	wrist-watch).
1906		2303
1907	You can tell a periodic watcher to trigger after some specific point	2304	You can tell a periodic watcher to trigger after some specific point
…		…
1912	C<ev_timer>, which would still trigger roughly 10 seconds after starting	2309	C<ev_timer>, which would still trigger roughly 10 seconds after starting
1913	it, as it uses a relative timeout).	2310	it, as it uses a relative timeout).
1914		2311
1915	C<ev_periodic> watchers can also be used to implement vastly more complex	2312	C<ev_periodic> watchers can also be used to implement vastly more complex
1916	timers, such as triggering an event on each "midnight, local time", or	2313	timers, such as triggering an event on each "midnight, local time", or
1917	other complicated rules. This cannot be done with C<ev_timer> watchers, as	2314	other complicated rules. This cannot easily be done with C<ev_timer>
1918	those cannot react to time jumps.	2315	watchers, as those cannot react to time jumps.
1919		2316
1920	As with timers, the callback is guaranteed to be invoked only when the	2317	As with timers, the callback is guaranteed to be invoked only when the
1921	point in time where it is supposed to trigger has passed. If multiple	2318	point in time where it is supposed to trigger has passed. If multiple
1922	timers become ready during the same loop iteration then the ones with	2319	timers become ready during the same loop iteration then the ones with
1923	earlier time-out values are invoked before ones with later time-out values	2320	earlier time-out values are invoked before ones with later time-out values
1924	(but this is no longer true when a callback calls C<ev_loop> recursively).	2321	(but this is no longer true when a callback calls C<ev_run> recursively).
1925		2322
1926	=head3 Watcher-Specific Functions and Data Members	2323	=head3 Watcher-Specific Functions and Data Members
1927		2324
1928	=over 4	2325	=over 4
1929		2326
…		…
1964		2361
1965	Another way to think about it (for the mathematically inclined) is that	2362	Another way to think about it (for the mathematically inclined) is that
1966	C<ev_periodic> will try to run the callback in this mode at the next possible	2363	C<ev_periodic> will try to run the callback in this mode at the next possible
1967	time where C<time = offset (mod interval)>, regardless of any time jumps.	2364	time where C<time = offset (mod interval)>, regardless of any time jumps.
1968		2365
1969	For numerical stability it is preferable that the C<offset> value is near	2366	The C<interval> I<MUST> be positive, and for numerical stability, the
1970	C<ev_now ()> (the current time), but there is no range requirement for	2367	interval value should be higher than C<1/8192> (which is around 100
1971	this value, and in fact is often specified as zero.	2368	microseconds) and C<offset> should be higher than C<0> and should have
		2369	at most a similar magnitude as the current time (say, within a factor of
		2370	ten). Typical values for offset are, in fact, C<0> or something between
		2371	C<0> and C<interval>, which is also the recommended range.
1972		2372
1973	Note also that there is an upper limit to how often a timer can fire (CPU	2373	Note also that there is an upper limit to how often a timer can fire (CPU
1974	speed for example), so if C<interval> is very small then timing stability	2374	speed for example), so if C<interval> is very small then timing stability
1975	will of course deteriorate. Libev itself tries to be exact to be about one	2375	will of course deteriorate. Libev itself tries to be exact to be about one
1976	millisecond (if the OS supports it and the machine is fast enough).	2376	millisecond (if the OS supports it and the machine is fast enough).
…		…
2006		2406
2007	NOTE: I<< This callback must always return a time that is higher than or	2407	NOTE: I<< This callback must always return a time that is higher than or
2008	equal to the passed C<now> value >>.	2408	equal to the passed C<now> value >>.
2009		2409
2010	This can be used to create very complex timers, such as a timer that	2410	This can be used to create very complex timers, such as a timer that
2011	triggers on "next midnight, local time". To do this, you would calculate the	2411	triggers on "next midnight, local time". To do this, you would calculate
2012	next midnight after C<now> and return the timestamp value for this. How	2412	the next midnight after C<now> and return the timestamp value for
2013	you do this is, again, up to you (but it is not trivial, which is the main	2413	this. Here is a (completely untested, no error checking) example on how to
2014	reason I omitted it as an example).	2414	do this:
		2415
		2416	#include <time.h>
		2417
		2418	static ev_tstamp
		2419	my_rescheduler (ev_periodic *w, ev_tstamp now)
		2420	{
		2421	time_t tnow = (time_t)now;
		2422	struct tm tm;
		2423	localtime_r (&tnow, &tm);
		2424
		2425	tm.tm_sec = tm.tm_min = tm.tm_hour = 0; // midnight current day
		2426	++tm.tm_mday; // midnight next day
		2427
		2428	return mktime (&tm);
		2429	}
		2430
		2431	Note: this code might run into trouble on days that have more then two
		2432	midnights (beginning and end).
2015		2433
2016	=back	2434	=back
2017		2435
2018	=item ev_periodic_again (loop, ev_periodic *)	2436	=item ev_periodic_again (loop, ev_periodic *)
2019		2437
…		…
2057	Example: Call a callback every hour, or, more precisely, whenever the	2475	Example: Call a callback every hour, or, more precisely, whenever the
2058	system time is divisible by 3600. The callback invocation times have	2476	system time is divisible by 3600. The callback invocation times have
2059	potentially a lot of jitter, but good long-term stability.	2477	potentially a lot of jitter, but good long-term stability.
2060		2478
2061	static void	2479	static void
2062	clock_cb (struct ev_loop *loop, ev_io *w, int revents)	2480	clock_cb (struct ev_loop *loop, ev_periodic *w, int revents)
2063	{	2481	{
2064	... its now a full hour (UTC, or TAI or whatever your clock follows)	2482	... its now a full hour (UTC, or TAI or whatever your clock follows)
2065	}	2483	}
2066		2484
2067	ev_periodic hourly_tick;	2485	ev_periodic hourly_tick;
…		…
2084		2502
2085	ev_periodic hourly_tick;	2503	ev_periodic hourly_tick;
2086	ev_periodic_init (&hourly_tick, clock_cb,	2504	ev_periodic_init (&hourly_tick, clock_cb,
2087	fmod (ev_now (loop), 3600.), 3600., 0);	2505	fmod (ev_now (loop), 3600.), 3600., 0);
2088	ev_periodic_start (loop, &hourly_tick);	2506	ev_periodic_start (loop, &hourly_tick);
2089		2507
2090		2508
2091	=head2 C<ev_signal> - signal me when a signal gets signalled!	2509	=head2 C<ev_signal> - signal me when a signal gets signalled!
2092		2510
2093	Signal watchers will trigger an event when the process receives a specific	2511	Signal watchers will trigger an event when the process receives a specific
2094	signal one or more times. Even though signals are very asynchronous, libev	2512	signal one or more times. Even though signals are very asynchronous, libev
2095	will try it's best to deliver signals synchronously, i.e. as part of the	2513	will try its best to deliver signals synchronously, i.e. as part of the
2096	normal event processing, like any other event.	2514	normal event processing, like any other event.
2097		2515
2098	If you want signals to be delivered truly asynchronously, just use	2516	If you want signals to be delivered truly asynchronously, just use
2099	C<sigaction> as you would do without libev and forget about sharing	2517	C<sigaction> as you would do without libev and forget about sharing
2100	the signal. You can even use C<ev_async> from a signal handler to	2518	the signal. You can even use C<ev_async> from a signal handler to
…		…
2104	only within the same loop, i.e. you can watch for C<SIGINT> in your	2522	only within the same loop, i.e. you can watch for C<SIGINT> in your
2105	default loop and for C<SIGIO> in another loop, but you cannot watch for	2523	default loop and for C<SIGIO> in another loop, but you cannot watch for
2106	C<SIGINT> in both the default loop and another loop at the same time. At	2524	C<SIGINT> in both the default loop and another loop at the same time. At
2107	the moment, C<SIGCHLD> is permanently tied to the default loop.	2525	the moment, C<SIGCHLD> is permanently tied to the default loop.
2108		2526
2109	When the first watcher gets started will libev actually register something	2527	Only after the first watcher for a signal is started will libev actually
2110	with the kernel (thus it coexists with your own signal handlers as long as	2528	register something with the kernel. It thus coexists with your own signal
2111	you don't register any with libev for the same signal).	2529	handlers as long as you don't register any with libev for the same signal.
2112
2113	Both the signal mask state (C<sigprocmask>) and the signal handler state
2114	(C<sigaction>) are unspecified after starting a signal watcher (and after
2115	sotpping it again), that is, libev might or might not block the signal,
2116	and might or might not set or restore the installed signal handler.
2117		2530
2118	If possible and supported, libev will install its handlers with	2531	If possible and supported, libev will install its handlers with
2119	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should	2532	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should
2120	not be unduly interrupted. If you have a problem with system calls getting	2533	not be unduly interrupted. If you have a problem with system calls getting
2121	interrupted by signals you can block all signals in an C<ev_check> watcher	2534	interrupted by signals you can block all signals in an C<ev_check> watcher
2122	and unblock them in an C<ev_prepare> watcher.	2535	and unblock them in an C<ev_prepare> watcher.
2123		2536
		2537	=head3 The special problem of inheritance over fork/execve/pthread_create
		2538
		2539	Both the signal mask (C<sigprocmask>) and the signal disposition
		2540	(C<sigaction>) are unspecified after starting a signal watcher (and after
		2541	stopping it again), that is, libev might or might not block the signal,
		2542	and might or might not set or restore the installed signal handler (but
		2543	see C<EVFLAG_NOSIGMASK>).
		2544
		2545	While this does not matter for the signal disposition (libev never
		2546	sets signals to C<SIG_IGN>, so handlers will be reset to C<SIG_DFL> on
		2547	C<execve>), this matters for the signal mask: many programs do not expect
		2548	certain signals to be blocked.
		2549
		2550	This means that before calling C<exec> (from the child) you should reset
		2551	the signal mask to whatever "default" you expect (all clear is a good
		2552	choice usually).
		2553
		2554	The simplest way to ensure that the signal mask is reset in the child is
		2555	to install a fork handler with C<pthread_atfork> that resets it. That will
		2556	catch fork calls done by libraries (such as the libc) as well.
		2557
		2558	In current versions of libev, the signal will not be blocked indefinitely
		2559	unless you use the C<signalfd> API (C<EV_SIGNALFD>). While this reduces
		2560	the window of opportunity for problems, it will not go away, as libev
		2561	I<has> to modify the signal mask, at least temporarily.
		2562
		2563	So I can't stress this enough: I<If you do not reset your signal mask when
		2564	you expect it to be empty, you have a race condition in your code>. This
		2565	is not a libev-specific thing, this is true for most event libraries.
		2566
		2567	=head3 The special problem of threads signal handling
		2568
		2569	POSIX threads has problematic signal handling semantics, specifically,
		2570	a lot of functionality (sigfd, sigwait etc.) only really works if all
		2571	threads in a process block signals, which is hard to achieve.
		2572
		2573	When you want to use sigwait (or mix libev signal handling with your own
		2574	for the same signals), you can tackle this problem by globally blocking
		2575	all signals before creating any threads (or creating them with a fully set
		2576	sigprocmask) and also specifying the C<EVFLAG_NOSIGMASK> when creating
		2577	loops. Then designate one thread as "signal receiver thread" which handles
		2578	these signals. You can pass on any signals that libev might be interested
		2579	in by calling C<ev_feed_signal>.
		2580
2124	=head3 Watcher-Specific Functions and Data Members	2581	=head3 Watcher-Specific Functions and Data Members
2125		2582
2126	=over 4	2583	=over 4
2127		2584
2128	=item ev_signal_init (ev_signal *, callback, int signum)	2585	=item ev_signal_init (ev_signal *, callback, int signum)
…		…
2143	Example: Try to exit cleanly on SIGINT.	2600	Example: Try to exit cleanly on SIGINT.
2144		2601
2145	static void	2602	static void
2146	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)	2603	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)
2147	{	2604	{
2148	ev_unloop (loop, EVUNLOOP_ALL);	2605	ev_break (loop, EVBREAK_ALL);
2149	}	2606	}
2150		2607
2151	ev_signal signal_watcher;	2608	ev_signal signal_watcher;
2152	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	2609	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
2153	ev_signal_start (loop, &signal_watcher);	2610	ev_signal_start (loop, &signal_watcher);
…		…
2262		2719
2263	=head2 C<ev_stat> - did the file attributes just change?	2720	=head2 C<ev_stat> - did the file attributes just change?
2264		2721
2265	This watches a file system path for attribute changes. That is, it calls	2722	This watches a file system path for attribute changes. That is, it calls
2266	C<stat> on that path in regular intervals (or when the OS says it changed)	2723	C<stat> on that path in regular intervals (or when the OS says it changed)
2267	and sees if it changed compared to the last time, invoking the callback if	2724	and sees if it changed compared to the last time, invoking the callback
2268	it did.	2725	if it did. Starting the watcher C<stat>'s the file, so only changes that
		2726	happen after the watcher has been started will be reported.
2269		2727
2270	The path does not need to exist: changing from "path exists" to "path does	2728	The path does not need to exist: changing from "path exists" to "path does
2271	not exist" is a status change like any other. The condition "path does not	2729	not exist" is a status change like any other. The condition "path does not
2272	exist" (or more correctly "path cannot be stat'ed") is signified by the	2730	exist" (or more correctly "path cannot be stat'ed") is signified by the
2273	C<st_nlink> field being zero (which is otherwise always forced to be at	2731	C<st_nlink> field being zero (which is otherwise always forced to be at
…		…
2503	Apart from keeping your process non-blocking (which is a useful	2961	Apart from keeping your process non-blocking (which is a useful
2504	effect on its own sometimes), idle watchers are a good place to do	2962	effect on its own sometimes), idle watchers are a good place to do
2505	"pseudo-background processing", or delay processing stuff to after the	2963	"pseudo-background processing", or delay processing stuff to after the
2506	event loop has handled all outstanding events.	2964	event loop has handled all outstanding events.
2507		2965
		2966	=head3 Abusing an C<ev_idle> watcher for its side-effect
		2967
		2968	As long as there is at least one active idle watcher, libev will never
		2969	sleep unnecessarily. Or in other words, it will loop as fast as possible.
		2970	For this to work, the idle watcher doesn't need to be invoked at all - the
		2971	lowest priority will do.
		2972
		2973	This mode of operation can be useful together with an C<ev_check> watcher,
		2974	to do something on each event loop iteration - for example to balance load
		2975	between different connections.
		2976
		2977	See L</Abusing an ev_check watcher for its side-effect> for a longer
		2978	example.
		2979
2508	=head3 Watcher-Specific Functions and Data Members	2980	=head3 Watcher-Specific Functions and Data Members
2509		2981
2510	=over 4	2982	=over 4
2511		2983
2512	=item ev_idle_init (ev_idle *, callback)	2984	=item ev_idle_init (ev_idle *, callback)
…		…
2523	callback, free it. Also, use no error checking, as usual.	2995	callback, free it. Also, use no error checking, as usual.
2524		2996
2525	static void	2997	static void
2526	idle_cb (struct ev_loop *loop, ev_idle *w, int revents)	2998	idle_cb (struct ev_loop *loop, ev_idle *w, int revents)
2527	{	2999	{
		3000	// stop the watcher
		3001	ev_idle_stop (loop, w);
		3002
		3003	// now we can free it
2528	free (w);	3004	free (w);
		3005
2529	// now do something you wanted to do when the program has	3006	// now do something you wanted to do when the program has
2530	// no longer anything immediate to do.	3007	// no longer anything immediate to do.
2531	}	3008	}
2532		3009
2533	ev_idle *idle_watcher = malloc (sizeof (ev_idle));	3010	ev_idle *idle_watcher = malloc (sizeof (ev_idle));
…		…
2535	ev_idle_start (loop, idle_watcher);	3012	ev_idle_start (loop, idle_watcher);
2536		3013
2537		3014
2538	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!	3015	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!
2539		3016
2540	Prepare and check watchers are usually (but not always) used in pairs:	3017	Prepare and check watchers are often (but not always) used in pairs:
2541	prepare watchers get invoked before the process blocks and check watchers	3018	prepare watchers get invoked before the process blocks and check watchers
2542	afterwards.	3019	afterwards.
2543		3020
2544	You I<must not> call C<ev_loop> or similar functions that enter	3021	You I<must not> call C<ev_run> (or similar functions that enter the
2545	the current event loop from either C<ev_prepare> or C<ev_check>	3022	current event loop) or C<ev_loop_fork> from either C<ev_prepare> or
2546	watchers. Other loops than the current one are fine, however. The	3023	C<ev_check> watchers. Other loops than the current one are fine,
2547	rationale behind this is that you do not need to check for recursion in	3024	however. The rationale behind this is that you do not need to check
2548	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,	3025	for recursion in those watchers, i.e. the sequence will always be
2549	C<ev_check> so if you have one watcher of each kind they will always be	3026	C<ev_prepare>, blocking, C<ev_check> so if you have one watcher of each
2550	called in pairs bracketing the blocking call.	3027	kind they will always be called in pairs bracketing the blocking call.
2551		3028
2552	Their main purpose is to integrate other event mechanisms into libev and	3029	Their main purpose is to integrate other event mechanisms into libev and
2553	their use is somewhat advanced. They could be used, for example, to track	3030	their use is somewhat advanced. They could be used, for example, to track
2554	variable changes, implement your own watchers, integrate net-snmp or a	3031	variable changes, implement your own watchers, integrate net-snmp or a
2555	coroutine library and lots more. They are also occasionally useful if	3032	coroutine library and lots more. They are also occasionally useful if
…		…
2573	with priority higher than or equal to the event loop and one coroutine	3050	with priority higher than or equal to the event loop and one coroutine
2574	of lower priority, but only once, using idle watchers to keep the event	3051	of lower priority, but only once, using idle watchers to keep the event
2575	loop from blocking if lower-priority coroutines are active, thus mapping	3052	loop from blocking if lower-priority coroutines are active, thus mapping
2576	low-priority coroutines to idle/background tasks).	3053	low-priority coroutines to idle/background tasks).
2577		3054
2578	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)	3055	When used for this purpose, it is recommended to give C<ev_check> watchers
2579	priority, to ensure that they are being run before any other watchers	3056	highest (C<EV_MAXPRI>) priority, to ensure that they are being run before
2580	after the poll (this doesn't matter for C<ev_prepare> watchers).	3057	any other watchers after the poll (this doesn't matter for C<ev_prepare>
		3058	watchers).
2581		3059
2582	Also, C<ev_check> watchers (and C<ev_prepare> watchers, too) should not	3060	Also, C<ev_check> watchers (and C<ev_prepare> watchers, too) should not
2583	activate ("feed") events into libev. While libev fully supports this, they	3061	activate ("feed") events into libev. While libev fully supports this, they
2584	might get executed before other C<ev_check> watchers did their job. As	3062	might get executed before other C<ev_check> watchers did their job. As
2585	C<ev_check> watchers are often used to embed other (non-libev) event	3063	C<ev_check> watchers are often used to embed other (non-libev) event
2586	loops those other event loops might be in an unusable state until their	3064	loops those other event loops might be in an unusable state until their
2587	C<ev_check> watcher ran (always remind yourself to coexist peacefully with	3065	C<ev_check> watcher ran (always remind yourself to coexist peacefully with
2588	others).	3066	others).
		3067
		3068	=head3 Abusing an C<ev_check> watcher for its side-effect
		3069
		3070	C<ev_check> (and less often also C<ev_prepare>) watchers can also be
		3071	useful because they are called once per event loop iteration. For
		3072	example, if you want to handle a large number of connections fairly, you
		3073	normally only do a bit of work for each active connection, and if there
		3074	is more work to do, you wait for the next event loop iteration, so other
		3075	connections have a chance of making progress.
		3076
		3077	Using an C<ev_check> watcher is almost enough: it will be called on the
		3078	next event loop iteration. However, that isn't as soon as possible -
		3079	without external events, your C<ev_check> watcher will not be invoked.
		3080
		3081	This is where C<ev_idle> watchers come in handy - all you need is a
		3082	single global idle watcher that is active as long as you have one active
		3083	C<ev_check> watcher. The C<ev_idle> watcher makes sure the event loop
		3084	will not sleep, and the C<ev_check> watcher makes sure a callback gets
		3085	invoked. Neither watcher alone can do that.
2589		3086
2590	=head3 Watcher-Specific Functions and Data Members	3087	=head3 Watcher-Specific Functions and Data Members
2591		3088
2592	=over 4	3089	=over 4
2593		3090
…		…
2717		3214
2718	if (timeout >= 0)	3215	if (timeout >= 0)
2719	// create/start timer	3216	// create/start timer
2720		3217
2721	// poll	3218	// poll
2722	ev_loop (EV_A_ 0);	3219	ev_run (EV_A_ 0);
2723		3220
2724	// stop timer again	3221	// stop timer again
2725	if (timeout >= 0)	3222	if (timeout >= 0)
2726	ev_timer_stop (EV_A_ &to);	3223	ev_timer_stop (EV_A_ &to);
2727		3224
…		…
2794		3291
2795	=over 4	3292	=over 4
2796		3293
2797	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)	3294	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
2798		3295
2799	=item ev_embed_set (ev_embed *, callback, struct ev_loop *embedded_loop)	3296	=item ev_embed_set (ev_embed *, struct ev_loop *embedded_loop)
2800		3297
2801	Configures the watcher to embed the given loop, which must be	3298	Configures the watcher to embed the given loop, which must be
2802	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be	3299	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
2803	invoked automatically, otherwise it is the responsibility of the callback	3300	invoked automatically, otherwise it is the responsibility of the callback
2804	to invoke it (it will continue to be called until the sweep has been done,	3301	to invoke it (it will continue to be called until the sweep has been done,
2805	if you do not want that, you need to temporarily stop the embed watcher).	3302	if you do not want that, you need to temporarily stop the embed watcher).
2806		3303
2807	=item ev_embed_sweep (loop, ev_embed *)	3304	=item ev_embed_sweep (loop, ev_embed *)
2808		3305
2809	Make a single, non-blocking sweep over the embedded loop. This works	3306	Make a single, non-blocking sweep over the embedded loop. This works
2810	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	3307	similarly to C<ev_run (embedded_loop, EVRUN_NOWAIT)>, but in the most
2811	appropriate way for embedded loops.	3308	appropriate way for embedded loops.
2812		3309
2813	=item struct ev_loop *other [read-only]	3310	=item struct ev_loop *other [read-only]
2814		3311
2815	The embedded event loop.	3312	The embedded event loop.
…		…
2825	used).	3322	used).
2826		3323
2827	struct ev_loop *loop_hi = ev_default_init (0);	3324	struct ev_loop *loop_hi = ev_default_init (0);
2828	struct ev_loop *loop_lo = 0;	3325	struct ev_loop *loop_lo = 0;
2829	ev_embed embed;	3326	ev_embed embed;
2830		3327
2831	// see if there is a chance of getting one that works	3328	// see if there is a chance of getting one that works
2832	// (remember that a flags value of 0 means autodetection)	3329	// (remember that a flags value of 0 means autodetection)
2833	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()	3330	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()
2834	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())	3331	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())
2835	: 0;	3332	: 0;
…		…
2849	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).	3346	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
2850		3347
2851	struct ev_loop *loop = ev_default_init (0);	3348	struct ev_loop *loop = ev_default_init (0);
2852	struct ev_loop *loop_socket = 0;	3349	struct ev_loop *loop_socket = 0;
2853	ev_embed embed;	3350	ev_embed embed;
2854		3351
2855	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)	3352	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
2856	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))	3353	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
2857	{	3354	{
2858	ev_embed_init (&embed, 0, loop_socket);	3355	ev_embed_init (&embed, 0, loop_socket);
2859	ev_embed_start (loop, &embed);	3356	ev_embed_start (loop, &embed);
…		…
2867		3364
2868	=head2 C<ev_fork> - the audacity to resume the event loop after a fork	3365	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
2869		3366
2870	Fork watchers are called when a C<fork ()> was detected (usually because	3367	Fork watchers are called when a C<fork ()> was detected (usually because
2871	whoever is a good citizen cared to tell libev about it by calling	3368	whoever is a good citizen cared to tell libev about it by calling
2872	C<ev_default_fork> or C<ev_loop_fork>). The invocation is done before the	3369	C<ev_loop_fork>). The invocation is done before the event loop blocks next
2873	event loop blocks next and before C<ev_check> watchers are being called,	3370	and before C<ev_check> watchers are being called, and only in the child
2874	and only in the child after the fork. If whoever good citizen calling	3371	after the fork. If whoever good citizen calling C<ev_default_fork> cheats
2875	C<ev_default_fork> cheats and calls it in the wrong process, the fork	3372	and calls it in the wrong process, the fork handlers will be invoked, too,
2876	handlers will be invoked, too, of course.	3373	of course.
2877		3374
2878	=head3 The special problem of life after fork - how is it possible?	3375	=head3 The special problem of life after fork - how is it possible?
2879		3376
2880	Most uses of C<fork()> consist of forking, then some simple calls to ste	3377	Most uses of C<fork ()> consist of forking, then some simple calls to set
2881	up/change the process environment, followed by a call to C<exec()>. This	3378	up/change the process environment, followed by a call to C<exec()>. This
2882	sequence should be handled by libev without any problems.	3379	sequence should be handled by libev without any problems.
2883		3380
2884	This changes when the application actually wants to do event handling	3381	This changes when the application actually wants to do event handling
2885	in the child, or both parent in child, in effect "continuing" after the	3382	in the child, or both parent in child, in effect "continuing" after the
…		…
2901	disadvantage of having to use multiple event loops (which do not support	3398	disadvantage of having to use multiple event loops (which do not support
2902	signal watchers).	3399	signal watchers).
2903		3400
2904	When this is not possible, or you want to use the default loop for	3401	When this is not possible, or you want to use the default loop for
2905	other reasons, then in the process that wants to start "fresh", call	3402	other reasons, then in the process that wants to start "fresh", call
2906	C<ev_default_destroy ()> followed by C<ev_default_loop (...)>. Destroying	3403	C<ev_loop_destroy (EV_DEFAULT)> followed by C<ev_default_loop (...)>.
2907	the default loop will "orphan" (not stop) all registered watchers, so you	3404	Destroying the default loop will "orphan" (not stop) all registered
2908	have to be careful not to execute code that modifies those watchers. Note	3405	watchers, so you have to be careful not to execute code that modifies
2909	also that in that case, you have to re-register any signal watchers.	3406	those watchers. Note also that in that case, you have to re-register any
		3407	signal watchers.
2910		3408
2911	=head3 Watcher-Specific Functions and Data Members	3409	=head3 Watcher-Specific Functions and Data Members
2912		3410
2913	=over 4	3411	=over 4
2914		3412
2915	=item ev_fork_init (ev_signal *, callback)	3413	=item ev_fork_init (ev_fork *, callback)
2916		3414
2917	Initialises and configures the fork watcher - it has no parameters of any	3415	Initialises and configures the fork watcher - it has no parameters of any
2918	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	3416	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
2919	believe me.	3417	really.
2920		3418
2921	=back	3419	=back
2922		3420
2923		3421
		3422	=head2 C<ev_cleanup> - even the best things end
		3423
		3424	Cleanup watchers are called just before the event loop is being destroyed
		3425	by a call to C<ev_loop_destroy>.
		3426
		3427	While there is no guarantee that the event loop gets destroyed, cleanup
		3428	watchers provide a convenient method to install cleanup hooks for your
		3429	program, worker threads and so on - you just to make sure to destroy the
		3430	loop when you want them to be invoked.
		3431
		3432	Cleanup watchers are invoked in the same way as any other watcher. Unlike
		3433	all other watchers, they do not keep a reference to the event loop (which
		3434	makes a lot of sense if you think about it). Like all other watchers, you
		3435	can call libev functions in the callback, except C<ev_cleanup_start>.
		3436
		3437	=head3 Watcher-Specific Functions and Data Members
		3438
		3439	=over 4
		3440
		3441	=item ev_cleanup_init (ev_cleanup *, callback)
		3442
		3443	Initialises and configures the cleanup watcher - it has no parameters of
		3444	any kind. There is a C<ev_cleanup_set> macro, but using it is utterly
		3445	pointless, I assure you.
		3446
		3447	=back
		3448
		3449	Example: Register an atexit handler to destroy the default loop, so any
		3450	cleanup functions are called.
		3451
		3452	static void
		3453	program_exits (void)
		3454	{
		3455	ev_loop_destroy (EV_DEFAULT_UC);
		3456	}
		3457
		3458	...
		3459	atexit (program_exits);
		3460
		3461
2924	=head2 C<ev_async> - how to wake up another event loop	3462	=head2 C<ev_async> - how to wake up an event loop
2925		3463
2926	In general, you cannot use an C<ev_loop> from multiple threads or other	3464	In general, you cannot use an C<ev_loop> from multiple threads or other
2927	asynchronous sources such as signal handlers (as opposed to multiple event	3465	asynchronous sources such as signal handlers (as opposed to multiple event
2928	loops - those are of course safe to use in different threads).	3466	loops - those are of course safe to use in different threads).
2929		3467
2930	Sometimes, however, you need to wake up another event loop you do not	3468	Sometimes, however, you need to wake up an event loop you do not control,
2931	control, for example because it belongs to another thread. This is what	3469	for example because it belongs to another thread. This is what C<ev_async>
2932	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you	3470	watchers do: as long as the C<ev_async> watcher is active, you can signal
2933	can signal it by calling C<ev_async_send>, which is thread- and signal	3471	it by calling C<ev_async_send>, which is thread- and signal safe.
2934	safe.
2935		3472
2936	This functionality is very similar to C<ev_signal> watchers, as signals,	3473	This functionality is very similar to C<ev_signal> watchers, as signals,
2937	too, are asynchronous in nature, and signals, too, will be compressed	3474	too, are asynchronous in nature, and signals, too, will be compressed
2938	(i.e. the number of callback invocations may be less than the number of	3475	(i.e. the number of callback invocations may be less than the number of
2939	C<ev_async_sent> calls).	3476	C<ev_async_send> calls). In fact, you could use signal watchers as a kind
2940		3477	of "global async watchers" by using a watcher on an otherwise unused
2941	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not	3478	signal, and C<ev_feed_signal> to signal this watcher from another thread,
2942	just the default loop.	3479	even without knowing which loop owns the signal.
2943		3480
2944	=head3 Queueing	3481	=head3 Queueing
2945		3482
2946	C<ev_async> does not support queueing of data in any way. The reason	3483	C<ev_async> does not support queueing of data in any way. The reason
2947	is that the author does not know of a simple (or any) algorithm for a	3484	is that the author does not know of a simple (or any) algorithm for a
2948	multiple-writer-single-reader queue that works in all cases and doesn't	3485	multiple-writer-single-reader queue that works in all cases and doesn't
2949	need elaborate support such as pthreads.	3486	need elaborate support such as pthreads or unportable memory access
		3487	semantics.
2950		3488
2951	That means that if you want to queue data, you have to provide your own	3489	That means that if you want to queue data, you have to provide your own
2952	queue. But at least I can tell you how to implement locking around your	3490	queue. But at least I can tell you how to implement locking around your
2953	queue:	3491	queue:
2954		3492
…		…
3038	trust me.	3576	trust me.
3039		3577
3040	=item ev_async_send (loop, ev_async *)	3578	=item ev_async_send (loop, ev_async *)
3041		3579
3042	Sends/signals/activates the given C<ev_async> watcher, that is, feeds	3580	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
3043	an C<EV_ASYNC> event on the watcher into the event loop. Unlike	3581	an C<EV_ASYNC> event on the watcher into the event loop, and instantly
		3582	returns.
		3583
3044	C<ev_feed_event>, this call is safe to do from other threads, signal or	3584	Unlike C<ev_feed_event>, this call is safe to do from other threads,
3045	similar contexts (see the discussion of C<EV_ATOMIC_T> in the embedding	3585	signal or similar contexts (see the discussion of C<EV_ATOMIC_T> in the
3046	section below on what exactly this means).	3586	embedding section below on what exactly this means).
3047		3587
3048	Note that, as with other watchers in libev, multiple events might get	3588	Note that, as with other watchers in libev, multiple events might get
3049	compressed into a single callback invocation (another way to look at this	3589	compressed into a single callback invocation (another way to look at
3050	is that C<ev_async> watchers are level-triggered, set on C<ev_async_send>,	3590	this is that C<ev_async> watchers are level-triggered: they are set on
3051	reset when the event loop detects that).	3591	C<ev_async_send>, reset when the event loop detects that).
3052		3592
3053	This call incurs the overhead of a system call only once per event loop	3593	This call incurs the overhead of at most one extra system call per event
3054	iteration, so while the overhead might be noticeable, it doesn't apply to	3594	loop iteration, if the event loop is blocked, and no syscall at all if
3055	repeated calls to C<ev_async_send> for the same event loop.	3595	the event loop (or your program) is processing events. That means that
		3596	repeated calls are basically free (there is no need to avoid calls for
		3597	performance reasons) and that the overhead becomes smaller (typically
		3598	zero) under load.
3056		3599
3057	=item bool = ev_async_pending (ev_async *)	3600	=item bool = ev_async_pending (ev_async *)
3058		3601
3059	Returns a non-zero value when C<ev_async_send> has been called on the	3602	Returns a non-zero value when C<ev_async_send> has been called on the
3060	watcher but the event has not yet been processed (or even noted) by the	3603	watcher but the event has not yet been processed (or even noted) by the
…		…
3077		3620
3078	There are some other functions of possible interest. Described. Here. Now.	3621	There are some other functions of possible interest. Described. Here. Now.
3079		3622
3080	=over 4	3623	=over 4
3081		3624
3082	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback)	3625	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback, arg)
3083		3626
3084	This function combines a simple timer and an I/O watcher, calls your	3627	This function combines a simple timer and an I/O watcher, calls your
3085	callback on whichever event happens first and automatically stops both	3628	callback on whichever event happens first and automatically stops both
3086	watchers. This is useful if you want to wait for a single event on an fd	3629	watchers. This is useful if you want to wait for a single event on an fd
3087	or timeout without having to allocate/configure/start/stop/free one or	3630	or timeout without having to allocate/configure/start/stop/free one or
…		…
3093		3636
3094	If C<timeout> is less than 0, then no timeout watcher will be	3637	If C<timeout> is less than 0, then no timeout watcher will be
3095	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and	3638	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
3096	repeat = 0) will be started. C<0> is a valid timeout.	3639	repeat = 0) will be started. C<0> is a valid timeout.
3097		3640
3098	The callback has the type C<void (*cb)(int revents, void *arg)> and gets	3641	The callback has the type C<void (*cb)(int revents, void *arg)> and is
3099	passed an C<revents> set like normal event callbacks (a combination of	3642	passed an C<revents> set like normal event callbacks (a combination of
3100	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>	3643	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMER>) and the C<arg>
3101	value passed to C<ev_once>. Note that it is possible to receive I<both>	3644	value passed to C<ev_once>. Note that it is possible to receive I<both>
3102	a timeout and an io event at the same time - you probably should give io	3645	a timeout and an io event at the same time - you probably should give io
3103	events precedence.	3646	events precedence.
3104		3647
3105	Example: wait up to ten seconds for data to appear on STDIN_FILENO.	3648	Example: wait up to ten seconds for data to appear on STDIN_FILENO.
3106		3649
3107	static void stdin_ready (int revents, void *arg)	3650	static void stdin_ready (int revents, void *arg)
3108	{	3651	{
3109	if (revents & EV_READ)	3652	if (revents & EV_READ)
3110	/* stdin might have data for us, joy! */;	3653	/* stdin might have data for us, joy! */;
3111	else if (revents & EV_TIMEOUT)	3654	else if (revents & EV_TIMER)
3112	/* doh, nothing entered */;	3655	/* doh, nothing entered */;
3113	}	3656	}
3114		3657
3115	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	3658	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
3116		3659
3117	=item ev_feed_event (struct ev_loop *, watcher *, int revents)
3118
3119	Feeds the given event set into the event loop, as if the specified event
3120	had happened for the specified watcher (which must be a pointer to an
3121	initialised but not necessarily started event watcher).
3122
3123	=item ev_feed_fd_event (struct ev_loop *, int fd, int revents)	3660	=item ev_feed_fd_event (loop, int fd, int revents)
3124		3661
3125	Feed an event on the given fd, as if a file descriptor backend detected	3662	Feed an event on the given fd, as if a file descriptor backend detected
3126	the given events it.	3663	the given events.
3127		3664
3128	=item ev_feed_signal_event (struct ev_loop *loop, int signum)	3665	=item ev_feed_signal_event (loop, int signum)
3129		3666
3130	Feed an event as if the given signal occurred (C<loop> must be the default	3667	Feed an event as if the given signal occurred. See also C<ev_feed_signal>,
3131	loop!).	3668	which is async-safe.
3132		3669
3133	=back	3670	=back
		3671
		3672
		3673	=head1 COMMON OR USEFUL IDIOMS (OR BOTH)
		3674
		3675	This section explains some common idioms that are not immediately
		3676	obvious. Note that examples are sprinkled over the whole manual, and this
		3677	section only contains stuff that wouldn't fit anywhere else.
		3678
		3679	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
		3680
		3681	Each watcher has, by default, a C<void *data> member that you can read
		3682	or modify at any time: libev will completely ignore it. This can be used
		3683	to associate arbitrary data with your watcher. If you need more data and
		3684	don't want to allocate memory separately and store a pointer to it in that
		3685	data member, you can also "subclass" the watcher type and provide your own
		3686	data:
		3687
		3688	struct my_io
		3689	{
		3690	ev_io io;
		3691	int otherfd;
		3692	void *somedata;
		3693	struct whatever *mostinteresting;
		3694	};
		3695
		3696	...
		3697	struct my_io w;
		3698	ev_io_init (&w.io, my_cb, fd, EV_READ);
		3699
		3700	And since your callback will be called with a pointer to the watcher, you
		3701	can cast it back to your own type:
		3702
		3703	static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)
		3704	{
		3705	struct my_io *w = (struct my_io *)w_;
		3706	...
		3707	}
		3708
		3709	More interesting and less C-conformant ways of casting your callback
		3710	function type instead have been omitted.
		3711
		3712	=head2 BUILDING YOUR OWN COMPOSITE WATCHERS
		3713
		3714	Another common scenario is to use some data structure with multiple
		3715	embedded watchers, in effect creating your own watcher that combines
		3716	multiple libev event sources into one "super-watcher":
		3717
		3718	struct my_biggy
		3719	{
		3720	int some_data;
		3721	ev_timer t1;
		3722	ev_timer t2;
		3723	}
		3724
		3725	In this case getting the pointer to C<my_biggy> is a bit more
		3726	complicated: Either you store the address of your C<my_biggy> struct in
		3727	the C<data> member of the watcher (for woozies or C++ coders), or you need
		3728	to use some pointer arithmetic using C<offsetof> inside your watchers (for
		3729	real programmers):
		3730
		3731	#include <stddef.h>
		3732
		3733	static void
		3734	t1_cb (EV_P_ ev_timer *w, int revents)
		3735	{
		3736	struct my_biggy big = (struct my_biggy *)
		3737	(((char *)w) - offsetof (struct my_biggy, t1));
		3738	}
		3739
		3740	static void
		3741	t2_cb (EV_P_ ev_timer *w, int revents)
		3742	{
		3743	struct my_biggy big = (struct my_biggy *)
		3744	(((char *)w) - offsetof (struct my_biggy, t2));
		3745	}
		3746
		3747	=head2 AVOIDING FINISHING BEFORE RETURNING
		3748
		3749	Often you have structures like this in event-based programs:
		3750
		3751	callback ()
		3752	{
		3753	free (request);
		3754	}
		3755
		3756	request = start_new_request (..., callback);
		3757
		3758	The intent is to start some "lengthy" operation. The C<request> could be
		3759	used to cancel the operation, or do other things with it.
		3760
		3761	It's not uncommon to have code paths in C<start_new_request> that
		3762	immediately invoke the callback, for example, to report errors. Or you add
		3763	some caching layer that finds that it can skip the lengthy aspects of the
		3764	operation and simply invoke the callback with the result.
		3765
		3766	The problem here is that this will happen I<before> C<start_new_request>
		3767	has returned, so C<request> is not set.
		3768
		3769	Even if you pass the request by some safer means to the callback, you
		3770	might want to do something to the request after starting it, such as
		3771	canceling it, which probably isn't working so well when the callback has
		3772	already been invoked.
		3773
		3774	A common way around all these issues is to make sure that
		3775	C<start_new_request> I<always> returns before the callback is invoked. If
		3776	C<start_new_request> immediately knows the result, it can artificially
		3777	delay invoking the callback by using a C<prepare> or C<idle> watcher for
		3778	example, or more sneakily, by reusing an existing (stopped) watcher and
		3779	pushing it into the pending queue:
		3780
		3781	ev_set_cb (watcher, callback);
		3782	ev_feed_event (EV_A_ watcher, 0);
		3783
		3784	This way, C<start_new_request> can safely return before the callback is
		3785	invoked, while not delaying callback invocation too much.
		3786
		3787	=head2 MODEL/NESTED EVENT LOOP INVOCATIONS AND EXIT CONDITIONS
		3788
		3789	Often (especially in GUI toolkits) there are places where you have
		3790	I<modal> interaction, which is most easily implemented by recursively
		3791	invoking C<ev_run>.
		3792
		3793	This brings the problem of exiting - a callback might want to finish the
		3794	main C<ev_run> call, but not the nested one (e.g. user clicked "Quit", but
		3795	a modal "Are you sure?" dialog is still waiting), or just the nested one
		3796	and not the main one (e.g. user clocked "Ok" in a modal dialog), or some
		3797	other combination: In these cases, a simple C<ev_break> will not work.
		3798
		3799	The solution is to maintain "break this loop" variable for each C<ev_run>
		3800	invocation, and use a loop around C<ev_run> until the condition is
		3801	triggered, using C<EVRUN_ONCE>:
		3802
		3803	// main loop
		3804	int exit_main_loop = 0;
		3805
		3806	while (!exit_main_loop)
		3807	ev_run (EV_DEFAULT_ EVRUN_ONCE);
		3808
		3809	// in a modal watcher
		3810	int exit_nested_loop = 0;
		3811
		3812	while (!exit_nested_loop)
		3813	ev_run (EV_A_ EVRUN_ONCE);
		3814
		3815	To exit from any of these loops, just set the corresponding exit variable:
		3816
		3817	// exit modal loop
		3818	exit_nested_loop = 1;
		3819
		3820	// exit main program, after modal loop is finished
		3821	exit_main_loop = 1;
		3822
		3823	// exit both
		3824	exit_main_loop = exit_nested_loop = 1;
		3825
		3826	=head2 THREAD LOCKING EXAMPLE
		3827
		3828	Here is a fictitious example of how to run an event loop in a different
		3829	thread from where callbacks are being invoked and watchers are
		3830	created/added/removed.
		3831
		3832	For a real-world example, see the C<EV::Loop::Async> perl module,
		3833	which uses exactly this technique (which is suited for many high-level
		3834	languages).
		3835
		3836	The example uses a pthread mutex to protect the loop data, a condition
		3837	variable to wait for callback invocations, an async watcher to notify the
		3838	event loop thread and an unspecified mechanism to wake up the main thread.
		3839
		3840	First, you need to associate some data with the event loop:
		3841
		3842	typedef struct {
		3843	mutex_t lock; /* global loop lock */
		3844	ev_async async_w;
		3845	thread_t tid;
		3846	cond_t invoke_cv;
		3847	} userdata;
		3848
		3849	void prepare_loop (EV_P)
		3850	{
		3851	// for simplicity, we use a static userdata struct.
		3852	static userdata u;
		3853
		3854	ev_async_init (&u->async_w, async_cb);
		3855	ev_async_start (EV_A_ &u->async_w);
		3856
		3857	pthread_mutex_init (&u->lock, 0);
		3858	pthread_cond_init (&u->invoke_cv, 0);
		3859
		3860	// now associate this with the loop
		3861	ev_set_userdata (EV_A_ u);
		3862	ev_set_invoke_pending_cb (EV_A_ l_invoke);
		3863	ev_set_loop_release_cb (EV_A_ l_release, l_acquire);
		3864
		3865	// then create the thread running ev_run
		3866	pthread_create (&u->tid, 0, l_run, EV_A);
		3867	}
		3868
		3869	The callback for the C<ev_async> watcher does nothing: the watcher is used
		3870	solely to wake up the event loop so it takes notice of any new watchers
		3871	that might have been added:
		3872
		3873	static void
		3874	async_cb (EV_P_ ev_async *w, int revents)
		3875	{
		3876	// just used for the side effects
		3877	}
		3878
		3879	The C<l_release> and C<l_acquire> callbacks simply unlock/lock the mutex
		3880	protecting the loop data, respectively.
		3881
		3882	static void
		3883	l_release (EV_P)
		3884	{
		3885	userdata *u = ev_userdata (EV_A);
		3886	pthread_mutex_unlock (&u->lock);
		3887	}
		3888
		3889	static void
		3890	l_acquire (EV_P)
		3891	{
		3892	userdata *u = ev_userdata (EV_A);
		3893	pthread_mutex_lock (&u->lock);
		3894	}
		3895
		3896	The event loop thread first acquires the mutex, and then jumps straight
		3897	into C<ev_run>:
		3898
		3899	void *
		3900	l_run (void *thr_arg)
		3901	{
		3902	struct ev_loop *loop = (struct ev_loop *)thr_arg;
		3903
		3904	l_acquire (EV_A);
		3905	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
		3906	ev_run (EV_A_ 0);
		3907	l_release (EV_A);
		3908
		3909	return 0;
		3910	}
		3911
		3912	Instead of invoking all pending watchers, the C<l_invoke> callback will
		3913	signal the main thread via some unspecified mechanism (signals? pipe
		3914	writes? C<Async::Interrupt>?) and then waits until all pending watchers
		3915	have been called (in a while loop because a) spurious wakeups are possible
		3916	and b) skipping inter-thread-communication when there are no pending
		3917	watchers is very beneficial):
		3918
		3919	static void
		3920	l_invoke (EV_P)
		3921	{
		3922	userdata *u = ev_userdata (EV_A);
		3923
		3924	while (ev_pending_count (EV_A))
		3925	{
		3926	wake_up_other_thread_in_some_magic_or_not_so_magic_way ();
		3927	pthread_cond_wait (&u->invoke_cv, &u->lock);
		3928	}
		3929	}
		3930
		3931	Now, whenever the main thread gets told to invoke pending watchers, it
		3932	will grab the lock, call C<ev_invoke_pending> and then signal the loop
		3933	thread to continue:
		3934
		3935	static void
		3936	real_invoke_pending (EV_P)
		3937	{
		3938	userdata *u = ev_userdata (EV_A);
		3939
		3940	pthread_mutex_lock (&u->lock);
		3941	ev_invoke_pending (EV_A);
		3942	pthread_cond_signal (&u->invoke_cv);
		3943	pthread_mutex_unlock (&u->lock);
		3944	}
		3945
		3946	Whenever you want to start/stop a watcher or do other modifications to an
		3947	event loop, you will now have to lock:
		3948
		3949	ev_timer timeout_watcher;
		3950	userdata *u = ev_userdata (EV_A);
		3951
		3952	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
		3953
		3954	pthread_mutex_lock (&u->lock);
		3955	ev_timer_start (EV_A_ &timeout_watcher);
		3956	ev_async_send (EV_A_ &u->async_w);
		3957	pthread_mutex_unlock (&u->lock);
		3958
		3959	Note that sending the C<ev_async> watcher is required because otherwise
		3960	an event loop currently blocking in the kernel will have no knowledge
		3961	about the newly added timer. By waking up the loop it will pick up any new
		3962	watchers in the next event loop iteration.
		3963
		3964	=head2 THREADS, COROUTINES, CONTINUATIONS, QUEUES... INSTEAD OF CALLBACKS
		3965
		3966	While the overhead of a callback that e.g. schedules a thread is small, it
		3967	is still an overhead. If you embed libev, and your main usage is with some
		3968	kind of threads or coroutines, you might want to customise libev so that
		3969	doesn't need callbacks anymore.
		3970
		3971	Imagine you have coroutines that you can switch to using a function
		3972	C<switch_to (coro)>, that libev runs in a coroutine called C<libev_coro>
		3973	and that due to some magic, the currently active coroutine is stored in a
		3974	global called C<current_coro>. Then you can build your own "wait for libev
		3975	event" primitive by changing C<EV_CB_DECLARE> and C<EV_CB_INVOKE> (note
		3976	the differing C<;> conventions):
		3977
		3978	#define EV_CB_DECLARE(type) struct my_coro *cb;
		3979	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)
		3980
		3981	That means instead of having a C callback function, you store the
		3982	coroutine to switch to in each watcher, and instead of having libev call
		3983	your callback, you instead have it switch to that coroutine.
		3984
		3985	A coroutine might now wait for an event with a function called
		3986	C<wait_for_event>. (the watcher needs to be started, as always, but it doesn't
		3987	matter when, or whether the watcher is active or not when this function is
		3988	called):
		3989
		3990	void
		3991	wait_for_event (ev_watcher *w)
		3992	{
		3993	ev_set_cb (w, current_coro);
		3994	switch_to (libev_coro);
		3995	}
		3996
		3997	That basically suspends the coroutine inside C<wait_for_event> and
		3998	continues the libev coroutine, which, when appropriate, switches back to
		3999	this or any other coroutine.
		4000
		4001	You can do similar tricks if you have, say, threads with an event queue -
		4002	instead of storing a coroutine, you store the queue object and instead of
		4003	switching to a coroutine, you push the watcher onto the queue and notify
		4004	any waiters.
		4005
		4006	To embed libev, see L</EMBEDDING>, but in short, it's easiest to create two
		4007	files, F<my_ev.h> and F<my_ev.c> that include the respective libev files:
		4008
		4009	// my_ev.h
		4010	#define EV_CB_DECLARE(type) struct my_coro *cb;
		4011	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)
		4012	#include "../libev/ev.h"
		4013
		4014	// my_ev.c
		4015	#define EV_H "my_ev.h"
		4016	#include "../libev/ev.c"
		4017
		4018	And then use F<my_ev.h> when you would normally use F<ev.h>, and compile
		4019	F<my_ev.c> into your project. When properly specifying include paths, you
		4020	can even use F<ev.h> as header file name directly.
3134		4021
3135		4022
3136	=head1 LIBEVENT EMULATION	4023	=head1 LIBEVENT EMULATION
3137		4024
3138	Libev offers a compatibility emulation layer for libevent. It cannot	4025	Libev offers a compatibility emulation layer for libevent. It cannot
3139	emulate the internals of libevent, so here are some usage hints:	4026	emulate the internals of libevent, so here are some usage hints:
3140		4027
3141	=over 4	4028	=over 4
		4029
		4030	=item * Only the libevent-1.4.1-beta API is being emulated.
		4031
		4032	This was the newest libevent version available when libev was implemented,
		4033	and is still mostly unchanged in 2010.
3142		4034
3143	=item * Use it by including <event.h>, as usual.	4035	=item * Use it by including <event.h>, as usual.
3144		4036
3145	=item * The following members are fully supported: ev_base, ev_callback,	4037	=item * The following members are fully supported: ev_base, ev_callback,
3146	ev_arg, ev_fd, ev_res, ev_events.	4038	ev_arg, ev_fd, ev_res, ev_events.
…		…
3152	=item * Priorities are not currently supported. Initialising priorities	4044	=item * Priorities are not currently supported. Initialising priorities
3153	will fail and all watchers will have the same priority, even though there	4045	will fail and all watchers will have the same priority, even though there
3154	is an ev_pri field.	4046	is an ev_pri field.
3155		4047
3156	=item * In libevent, the last base created gets the signals, in libev, the	4048	=item * In libevent, the last base created gets the signals, in libev, the
3157	first base created (== the default loop) gets the signals.	4049	base that registered the signal gets the signals.
3158		4050
3159	=item * Other members are not supported.	4051	=item * Other members are not supported.
3160		4052
3161	=item * The libev emulation is I<not> ABI compatible to libevent, you need	4053	=item * The libev emulation is I<not> ABI compatible to libevent, you need
3162	to use the libev header file and library.	4054	to use the libev header file and library.
3163		4055
3164	=back	4056	=back
3165		4057
3166	=head1 C++ SUPPORT	4058	=head1 C++ SUPPORT
		4059
		4060	=head2 C API
		4061
		4062	The normal C API should work fine when used from C++: both ev.h and the
		4063	libev sources can be compiled as C++. Therefore, code that uses the C API
		4064	will work fine.
		4065
		4066	Proper exception specifications might have to be added to callbacks passed
		4067	to libev: exceptions may be thrown only from watcher callbacks, all other
		4068	callbacks (allocator, syserr, loop acquire/release and periodic reschedule
		4069	callbacks) must not throw exceptions, and might need a C<noexcept>
		4070	specification. If you have code that needs to be compiled as both C and
		4071	C++ you can use the C<EV_NOEXCEPT> macro for this:
		4072
		4073	static void
		4074	fatal_error (const char *msg) EV_NOEXCEPT
		4075	{
		4076	perror (msg);
		4077	abort ();
		4078	}
		4079
		4080	...
		4081	ev_set_syserr_cb (fatal_error);
		4082
		4083	The only API functions that can currently throw exceptions are C<ev_run>,
		4084	C<ev_invoke>, C<ev_invoke_pending> and C<ev_loop_destroy> (the latter
		4085	because it runs cleanup watchers).
		4086
		4087	Throwing exceptions in watcher callbacks is only supported if libev itself
		4088	is compiled with a C++ compiler or your C and C++ environments allow
		4089	throwing exceptions through C libraries (most do).
		4090
		4091	=head2 C++ API
3167		4092
3168	Libev comes with some simplistic wrapper classes for C++ that mainly allow	4093	Libev comes with some simplistic wrapper classes for C++ that mainly allow
3169	you to use some convenience methods to start/stop watchers and also change	4094	you to use some convenience methods to start/stop watchers and also change
3170	the callback model to a model using method callbacks on objects.	4095	the callback model to a model using method callbacks on objects.
3171		4096
3172	To use it,	4097	To use it,
3173		4098
3174	#include <ev++.h>	4099	#include <ev++.h>
3175		4100
3176	This automatically includes F<ev.h> and puts all of its definitions (many	4101	This automatically includes F<ev.h> and puts all of its definitions (many
3177	of them macros) into the global namespace. All C++ specific things are	4102	of them macros) into the global namespace. All C++ specific things are
3178	put into the C<ev> namespace. It should support all the same embedding	4103	put into the C<ev> namespace. It should support all the same embedding
…		…
3181	Care has been taken to keep the overhead low. The only data member the C++	4106	Care has been taken to keep the overhead low. The only data member the C++
3182	classes add (compared to plain C-style watchers) is the event loop pointer	4107	classes add (compared to plain C-style watchers) is the event loop pointer
3183	that the watcher is associated with (or no additional members at all if	4108	that the watcher is associated with (or no additional members at all if
3184	you disable C<EV_MULTIPLICITY> when embedding libev).	4109	you disable C<EV_MULTIPLICITY> when embedding libev).
3185		4110
3186	Currently, functions, and static and non-static member functions can be	4111	Currently, functions, static and non-static member functions and classes
3187	used as callbacks. Other types should be easy to add as long as they only	4112	with C<operator ()> can be used as callbacks. Other types should be easy
3188	need one additional pointer for context. If you need support for other	4113	to add as long as they only need one additional pointer for context. If
3189	types of functors please contact the author (preferably after implementing	4114	you need support for other types of functors please contact the author
3190	it).	4115	(preferably after implementing it).
		4116
		4117	For all this to work, your C++ compiler either has to use the same calling
		4118	conventions as your C compiler (for static member functions), or you have
		4119	to embed libev and compile libev itself as C++.
3191		4120
3192	Here is a list of things available in the C<ev> namespace:	4121	Here is a list of things available in the C<ev> namespace:
3193		4122
3194	=over 4	4123	=over 4
3195		4124
…		…
3205	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.	4134	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.
3206		4135
3207	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of	4136	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of
3208	the same name in the C<ev> namespace, with the exception of C<ev_signal>	4137	the same name in the C<ev> namespace, with the exception of C<ev_signal>
3209	which is called C<ev::sig> to avoid clashes with the C<signal> macro	4138	which is called C<ev::sig> to avoid clashes with the C<signal> macro
3210	defines by many implementations.	4139	defined by many implementations.
3211		4140
3212	All of those classes have these methods:	4141	All of those classes have these methods:
3213		4142
3214	=over 4	4143	=over 4
3215		4144
3216	=item ev::TYPE::TYPE ()	4145	=item ev::TYPE::TYPE ()
3217		4146
3218	=item ev::TYPE::TYPE (struct ev_loop *)	4147	=item ev::TYPE::TYPE (loop)
3219		4148
3220	=item ev::TYPE::~TYPE	4149	=item ev::TYPE::~TYPE
3221		4150
3222	The constructor (optionally) takes an event loop to associate the watcher	4151	The constructor (optionally) takes an event loop to associate the watcher
3223	with. If it is omitted, it will use C<EV_DEFAULT>.	4152	with. If it is omitted, it will use C<EV_DEFAULT>.
…		…
3256	myclass obj;	4185	myclass obj;
3257	ev::io iow;	4186	ev::io iow;
3258	iow.set <myclass, &myclass::io_cb> (&obj);	4187	iow.set <myclass, &myclass::io_cb> (&obj);
3259		4188
3260	=item w->set (object *)	4189	=item w->set (object *)
3261
3262	This is an B<experimental> feature that might go away in a future version.
3263		4190
3264	This is a variation of a method callback - leaving out the method to call	4191	This is a variation of a method callback - leaving out the method to call
3265	will default the method to C<operator ()>, which makes it possible to use	4192	will default the method to C<operator ()>, which makes it possible to use
3266	functor objects without having to manually specify the C<operator ()> all	4193	functor objects without having to manually specify the C<operator ()> all
3267	the time. Incidentally, you can then also leave out the template argument	4194	the time. Incidentally, you can then also leave out the template argument
…		…
3279	void operator() (ev::io &w, int revents)	4206	void operator() (ev::io &w, int revents)
3280	{	4207	{
3281	...	4208	...
3282	}	4209	}
3283	}	4210	}
3284		4211
3285	myfunctor f;	4212	myfunctor f;
3286		4213
3287	ev::io w;	4214	ev::io w;
3288	w.set (&f);	4215	w.set (&f);
3289		4216
…		…
3300	Example: Use a plain function as callback.	4227	Example: Use a plain function as callback.
3301		4228
3302	static void io_cb (ev::io &w, int revents) { }	4229	static void io_cb (ev::io &w, int revents) { }
3303	iow.set <io_cb> ();	4230	iow.set <io_cb> ();
3304		4231
3305	=item w->set (struct ev_loop *)	4232	=item w->set (loop)
3306		4233
3307	Associates a different C<struct ev_loop> with this watcher. You can only	4234	Associates a different C<struct ev_loop> with this watcher. You can only
3308	do this when the watcher is inactive (and not pending either).	4235	do this when the watcher is inactive (and not pending either).
3309		4236
3310	=item w->set ([arguments])	4237	=item w->set ([arguments])
3311		4238
3312	Basically the same as C<ev_TYPE_set>, with the same arguments. Must be	4239	Basically the same as C<ev_TYPE_set> (except for C<ev::embed> watchers>),
		4240	with the same arguments. Either this method or a suitable start method
3313	called at least once. Unlike the C counterpart, an active watcher gets	4241	must be called at least once. Unlike the C counterpart, an active watcher
3314	automatically stopped and restarted when reconfiguring it with this	4242	gets automatically stopped and restarted when reconfiguring it with this
3315	method.	4243	method.
		4244
		4245	For C<ev::embed> watchers this method is called C<set_embed>, to avoid
		4246	clashing with the C<set (loop)> method.
3316		4247
3317	=item w->start ()	4248	=item w->start ()
3318		4249
3319	Starts the watcher. Note that there is no C<loop> argument, as the	4250	Starts the watcher. Note that there is no C<loop> argument, as the
3320	constructor already stores the event loop.	4251	constructor already stores the event loop.
3321		4252
		4253	=item w->start ([arguments])
		4254
		4255	Instead of calling C<set> and C<start> methods separately, it is often
		4256	convenient to wrap them in one call. Uses the same type of arguments as
		4257	the configure C<set> method of the watcher.
		4258
3322	=item w->stop ()	4259	=item w->stop ()
3323		4260
3324	Stops the watcher if it is active. Again, no C<loop> argument.	4261	Stops the watcher if it is active. Again, no C<loop> argument.
3325		4262
3326	=item w->again () (C<ev::timer>, C<ev::periodic> only)	4263	=item w->again () (C<ev::timer>, C<ev::periodic> only)
…		…
3338		4275
3339	=back	4276	=back
3340		4277
3341	=back	4278	=back
3342		4279
3343	Example: Define a class with an IO and idle watcher, start one of them in	4280	Example: Define a class with two I/O and idle watchers, start the I/O
3344	the constructor.	4281	watchers in the constructor.
3345		4282
3346	class myclass	4283	class myclass
3347	{	4284	{
3348	ev::io io ; void io_cb (ev::io &w, int revents);	4285	ev::io io ; void io_cb (ev::io &w, int revents);
		4286	ev::io io2 ; void io2_cb (ev::io &w, int revents);
3349	ev::idle idle; void idle_cb (ev::idle &w, int revents);	4287	ev::idle idle; void idle_cb (ev::idle &w, int revents);
3350		4288
3351	myclass (int fd)	4289	myclass (int fd)
3352	{	4290	{
3353	io .set <myclass, &myclass::io_cb > (this);	4291	io .set <myclass, &myclass::io_cb > (this);
		4292	io2 .set <myclass, &myclass::io2_cb > (this);
3354	idle.set <myclass, &myclass::idle_cb> (this);	4293	idle.set <myclass, &myclass::idle_cb> (this);
3355		4294
3356	io.start (fd, ev::READ);	4295	io.set (fd, ev::WRITE); // configure the watcher
		4296	io.start (); // start it whenever convenient
		4297
		4298	io2.start (fd, ev::READ); // set + start in one call
3357	}	4299	}
3358	};	4300	};
3359		4301
3360		4302
3361	=head1 OTHER LANGUAGE BINDINGS	4303	=head1 OTHER LANGUAGE BINDINGS
…		…
3400	L<http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hlibev>.	4342	L<http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hlibev>.
3401		4343
3402	=item D	4344	=item D
3403		4345
3404	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to	4346	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
3405	be found at L<http://proj.llucax.com.ar/wiki/evd>.	4347	be found at L<http://www.llucax.com.ar/proj/ev.d/index.html>.
3406		4348
3407	=item Ocaml	4349	=item Ocaml
3408		4350
3409	Erkki Seppala has written Ocaml bindings for libev, to be found at	4351	Erkki Seppala has written Ocaml bindings for libev, to be found at
3410	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.	4352	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.
3411		4353
3412	=item Lua	4354	=item Lua
3413		4355
3414	Brian Maher has written a partial interface to libev	4356	Brian Maher has written a partial interface to libev for lua (at the
3415	for lua (only C<ev_io> and C<ev_timer>), to be found at	4357	time of this writing, only C<ev_io> and C<ev_timer>), to be found at
3416	L<http://github.com/brimworks/lua-ev>.	4358	L<http://github.com/brimworks/lua-ev>.
		4359
		4360	=item Javascript
		4361
		4362	Node.js (L<http://nodejs.org>) uses libev as the underlying event library.
		4363
		4364	=item Others
		4365
		4366	There are others, and I stopped counting.
3417		4367
3418	=back	4368	=back
3419		4369
3420		4370
3421	=head1 MACRO MAGIC	4371	=head1 MACRO MAGIC
…		…
3435	loop argument"). The C<EV_A> form is used when this is the sole argument,	4385	loop argument"). The C<EV_A> form is used when this is the sole argument,
3436	C<EV_A_> is used when other arguments are following. Example:	4386	C<EV_A_> is used when other arguments are following. Example:
3437		4387
3438	ev_unref (EV_A);	4388	ev_unref (EV_A);
3439	ev_timer_add (EV_A_ watcher);	4389	ev_timer_add (EV_A_ watcher);
3440	ev_loop (EV_A_ 0);	4390	ev_run (EV_A_ 0);
3441		4391
3442	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,	4392	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
3443	which is often provided by the following macro.	4393	which is often provided by the following macro.
3444		4394
3445	=item C<EV_P>, C<EV_P_>	4395	=item C<EV_P>, C<EV_P_>
…		…
3458	suitable for use with C<EV_A>.	4408	suitable for use with C<EV_A>.
3459		4409
3460	=item C<EV_DEFAULT>, C<EV_DEFAULT_>	4410	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
3461		4411
3462	Similar to the other two macros, this gives you the value of the default	4412	Similar to the other two macros, this gives you the value of the default
3463	loop, if multiple loops are supported ("ev loop default").	4413	loop, if multiple loops are supported ("ev loop default"). The default loop
		4414	will be initialised if it isn't already initialised.
		4415
		4416	For non-multiplicity builds, these macros do nothing, so you always have
		4417	to initialise the loop somewhere.
3464		4418
3465	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>	4419	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
3466		4420
3467	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the	4421	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
3468	default loop has been initialised (C<UC> == unchecked). Their behaviour	4422	default loop has been initialised (C<UC> == unchecked). Their behaviour
…		…
3485	}	4439	}
3486		4440
3487	ev_check check;	4441	ev_check check;
3488	ev_check_init (&check, check_cb);	4442	ev_check_init (&check, check_cb);
3489	ev_check_start (EV_DEFAULT_ &check);	4443	ev_check_start (EV_DEFAULT_ &check);
3490	ev_loop (EV_DEFAULT_ 0);	4444	ev_run (EV_DEFAULT_ 0);
3491		4445
3492	=head1 EMBEDDING	4446	=head1 EMBEDDING
3493		4447
3494	Libev can (and often is) directly embedded into host	4448	Libev can (and often is) directly embedded into host
3495	applications. Examples of applications that embed it include the Deliantra	4449	applications. Examples of applications that embed it include the Deliantra
…		…
3535	ev_vars.h	4489	ev_vars.h
3536	ev_wrap.h	4490	ev_wrap.h
3537		4491
3538	ev_win32.c required on win32 platforms only	4492	ev_win32.c required on win32 platforms only
3539		4493
3540	ev_select.c only when select backend is enabled (which is enabled by default)	4494	ev_select.c only when select backend is enabled
3541	ev_poll.c only when poll backend is enabled (disabled by default)	4495	ev_poll.c only when poll backend is enabled
3542	ev_epoll.c only when the epoll backend is enabled (disabled by default)	4496	ev_epoll.c only when the epoll backend is enabled
		4497	ev_linuxaio.c only when the linux aio backend is enabled
		4498	ev_iouring.c only when the linux io_uring backend is enabled
3543	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)	4499	ev_kqueue.c only when the kqueue backend is enabled
3544	ev_port.c only when the solaris port backend is enabled (disabled by default)	4500	ev_port.c only when the solaris port backend is enabled
3545		4501
3546	F<ev.c> includes the backend files directly when enabled, so you only need	4502	F<ev.c> includes the backend files directly when enabled, so you only need
3547	to compile this single file.	4503	to compile this single file.
3548		4504
3549	=head3 LIBEVENT COMPATIBILITY API	4505	=head3 LIBEVENT COMPATIBILITY API
…		…
3575	libev.m4	4531	libev.m4
3576		4532
3577	=head2 PREPROCESSOR SYMBOLS/MACROS	4533	=head2 PREPROCESSOR SYMBOLS/MACROS
3578		4534
3579	Libev can be configured via a variety of preprocessor symbols you have to	4535	Libev can be configured via a variety of preprocessor symbols you have to
3580	define before including any of its files. The default in the absence of	4536	define before including (or compiling) any of its files. The default in
3581	autoconf is documented for every option.	4537	the absence of autoconf is documented for every option.
		4538
		4539	Symbols marked with "(h)" do not change the ABI, and can have different
		4540	values when compiling libev vs. including F<ev.h>, so it is permissible
		4541	to redefine them before including F<ev.h> without breaking compatibility
		4542	to a compiled library. All other symbols change the ABI, which means all
		4543	users of libev and the libev code itself must be compiled with compatible
		4544	settings.
3582		4545
3583	=over 4	4546	=over 4
3584		4547
		4548	=item EV_COMPAT3 (h)
		4549
		4550	Backwards compatibility is a major concern for libev. This is why this
		4551	release of libev comes with wrappers for the functions and symbols that
		4552	have been renamed between libev version 3 and 4.
		4553
		4554	You can disable these wrappers (to test compatibility with future
		4555	versions) by defining C<EV_COMPAT3> to C<0> when compiling your
		4556	sources. This has the additional advantage that you can drop the C<struct>
		4557	from C<struct ev_loop> declarations, as libev will provide an C<ev_loop>
		4558	typedef in that case.
		4559
		4560	In some future version, the default for C<EV_COMPAT3> will become C<0>,
		4561	and in some even more future version the compatibility code will be
		4562	removed completely.
		4563
3585	=item EV_STANDALONE	4564	=item EV_STANDALONE (h)
3586		4565
3587	Must always be C<1> if you do not use autoconf configuration, which	4566	Must always be C<1> if you do not use autoconf configuration, which
3588	keeps libev from including F<config.h>, and it also defines dummy	4567	keeps libev from including F<config.h>, and it also defines dummy
3589	implementations for some libevent functions (such as logging, which is not	4568	implementations for some libevent functions (such as logging, which is not
3590	supported). It will also not define any of the structs usually found in	4569	supported). It will also not define any of the structs usually found in
3591	F<event.h> that are not directly supported by the libev core alone.	4570	F<event.h> that are not directly supported by the libev core alone.
3592		4571
3593	In standalone mode, libev will still try to automatically deduce the	4572	In standalone mode, libev will still try to automatically deduce the
3594	configuration, but has to be more conservative.	4573	configuration, but has to be more conservative.
		4574
		4575	=item EV_USE_FLOOR
		4576
		4577	If defined to be C<1>, libev will use the C<floor ()> function for its
		4578	periodic reschedule calculations, otherwise libev will fall back on a
		4579	portable (slower) implementation. If you enable this, you usually have to
		4580	link against libm or something equivalent. Enabling this when the C<floor>
		4581	function is not available will fail, so the safe default is to not enable
		4582	this.
3595		4583
3596	=item EV_USE_MONOTONIC	4584	=item EV_USE_MONOTONIC
3597		4585
3598	If defined to be C<1>, libev will try to detect the availability of the	4586	If defined to be C<1>, libev will try to detect the availability of the
3599	monotonic clock option at both compile time and runtime. Otherwise no	4587	monotonic clock option at both compile time and runtime. Otherwise no
…		…
3636	available and will probe for kernel support at runtime. This will improve	4624	available and will probe for kernel support at runtime. This will improve
3637	C<ev_signal> and C<ev_async> performance and reduce resource consumption.	4625	C<ev_signal> and C<ev_async> performance and reduce resource consumption.
3638	If undefined, it will be enabled if the headers indicate GNU/Linux + Glibc	4626	If undefined, it will be enabled if the headers indicate GNU/Linux + Glibc
3639	2.7 or newer, otherwise disabled.	4627	2.7 or newer, otherwise disabled.
3640		4628
		4629	=item EV_USE_SIGNALFD
		4630
		4631	If defined to be C<1>, then libev will assume that C<signalfd ()> is
		4632	available and will probe for kernel support at runtime. This enables
		4633	the use of EVFLAG_SIGNALFD for faster and simpler signal handling. If
		4634	undefined, it will be enabled if the headers indicate GNU/Linux + Glibc
		4635	2.7 or newer, otherwise disabled.
		4636
		4637	=item EV_USE_TIMERFD
		4638
		4639	If defined to be C<1>, then libev will assume that C<timerfd ()> is
		4640	available and will probe for kernel support at runtime. This allows
		4641	libev to detect time jumps accurately. If undefined, it will be enabled
		4642	if the headers indicate GNU/Linux + Glibc 2.8 or newer and define
		4643	C<TFD_TIMER_CANCEL_ON_SET>, otherwise disabled.
		4644
		4645	=item EV_USE_EVENTFD
		4646
		4647	If defined to be C<1>, then libev will assume that C<eventfd ()> is
		4648	available and will probe for kernel support at runtime. This will improve
		4649	C<ev_signal> and C<ev_async> performance and reduce resource consumption.
		4650	If undefined, it will be enabled if the headers indicate GNU/Linux + Glibc
		4651	2.7 or newer, otherwise disabled.
		4652
3641	=item EV_USE_SELECT	4653	=item EV_USE_SELECT
3642		4654
3643	If undefined or defined to be C<1>, libev will compile in support for the	4655	If undefined or defined to be C<1>, libev will compile in support for the
3644	C<select>(2) backend. No attempt at auto-detection will be done: if no	4656	C<select>(2) backend. No attempt at auto-detection will be done: if no
3645	other method takes over, select will be it. Otherwise the select backend	4657	other method takes over, select will be it. Otherwise the select backend
…		…
3685	If programs implement their own fd to handle mapping on win32, then this	4697	If programs implement their own fd to handle mapping on win32, then this
3686	macro can be used to override the C<close> function, useful to unregister	4698	macro can be used to override the C<close> function, useful to unregister
3687	file descriptors again. Note that the replacement function has to close	4699	file descriptors again. Note that the replacement function has to close
3688	the underlying OS handle.	4700	the underlying OS handle.
3689		4701
		4702	=item EV_USE_WSASOCKET
		4703
		4704	If defined to be C<1>, libev will use C<WSASocket> to create its internal
		4705	communication socket, which works better in some environments. Otherwise,
		4706	the normal C<socket> function will be used, which works better in other
		4707	environments.
		4708
3690	=item EV_USE_POLL	4709	=item EV_USE_POLL
3691		4710
3692	If defined to be C<1>, libev will compile in support for the C<poll>(2)	4711	If defined to be C<1>, libev will compile in support for the C<poll>(2)
3693	backend. Otherwise it will be enabled on non-win32 platforms. It	4712	backend. Otherwise it will be enabled on non-win32 platforms. It
3694	takes precedence over select.	4713	takes precedence over select.
…		…
3698	If defined to be C<1>, libev will compile in support for the Linux	4717	If defined to be C<1>, libev will compile in support for the Linux
3699	C<epoll>(7) backend. Its availability will be detected at runtime,	4718	C<epoll>(7) backend. Its availability will be detected at runtime,
3700	otherwise another method will be used as fallback. This is the preferred	4719	otherwise another method will be used as fallback. This is the preferred
3701	backend for GNU/Linux systems. If undefined, it will be enabled if the	4720	backend for GNU/Linux systems. If undefined, it will be enabled if the
3702	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.	4721	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
		4722
		4723	=item EV_USE_LINUXAIO
		4724
		4725	If defined to be C<1>, libev will compile in support for the Linux aio
		4726	backend (C<EV_USE_EPOLL> must also be enabled). If undefined, it will be
		4727	enabled on linux, otherwise disabled.
		4728
		4729	=item EV_USE_IOURING
		4730
		4731	If defined to be C<1>, libev will compile in support for the Linux
		4732	io_uring backend (C<EV_USE_EPOLL> must also be enabled). Due to it's
		4733	current limitations it has to be requested explicitly. If undefined, it
		4734	will be enabled on linux, otherwise disabled.
3703		4735
3704	=item EV_USE_KQUEUE	4736	=item EV_USE_KQUEUE
3705		4737
3706	If defined to be C<1>, libev will compile in support for the BSD style	4738	If defined to be C<1>, libev will compile in support for the BSD style
3707	C<kqueue>(2) backend. Its actual availability will be detected at runtime,	4739	C<kqueue>(2) backend. Its actual availability will be detected at runtime,
…		…
3729	If defined to be C<1>, libev will compile in support for the Linux inotify	4761	If defined to be C<1>, libev will compile in support for the Linux inotify
3730	interface to speed up C<ev_stat> watchers. Its actual availability will	4762	interface to speed up C<ev_stat> watchers. Its actual availability will
3731	be detected at runtime. If undefined, it will be enabled if the headers	4763	be detected at runtime. If undefined, it will be enabled if the headers
3732	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.	4764	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
3733		4765
		4766	=item EV_NO_SMP
		4767
		4768	If defined to be C<1>, libev will assume that memory is always coherent
		4769	between threads, that is, threads can be used, but threads never run on
		4770	different cpus (or different cpu cores). This reduces dependencies
		4771	and makes libev faster.
		4772
		4773	=item EV_NO_THREADS
		4774
		4775	If defined to be C<1>, libev will assume that it will never be called from
		4776	different threads (that includes signal handlers), which is a stronger
		4777	assumption than C<EV_NO_SMP>, above. This reduces dependencies and makes
		4778	libev faster.
		4779
3734	=item EV_ATOMIC_T	4780	=item EV_ATOMIC_T
3735		4781
3736	Libev requires an integer type (suitable for storing C<0> or C<1>) whose	4782	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
3737	access is atomic with respect to other threads or signal contexts. No such	4783	access is atomic with respect to other threads or signal contexts. No
3738	type is easily found in the C language, so you can provide your own type	4784	such type is easily found in the C language, so you can provide your own
3739	that you know is safe for your purposes. It is used both for signal handler "locking"	4785	type that you know is safe for your purposes. It is used both for signal
3740	as well as for signal and thread safety in C<ev_async> watchers.	4786	handler "locking" as well as for signal and thread safety in C<ev_async>
		4787	watchers.
3741		4788
3742	In the absence of this define, libev will use C<sig_atomic_t volatile>	4789	In the absence of this define, libev will use C<sig_atomic_t volatile>
3743	(from F<signal.h>), which is usually good enough on most platforms.	4790	(from F<signal.h>), which is usually good enough on most platforms.
3744		4791
3745	=item EV_H	4792	=item EV_H (h)
3746		4793
3747	The name of the F<ev.h> header file used to include it. The default if	4794	The name of the F<ev.h> header file used to include it. The default if
3748	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be	4795	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
3749	used to virtually rename the F<ev.h> header file in case of conflicts.	4796	used to virtually rename the F<ev.h> header file in case of conflicts.
3750		4797
3751	=item EV_CONFIG_H	4798	=item EV_CONFIG_H (h)
3752		4799
3753	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	4800	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
3754	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	4801	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
3755	C<EV_H>, above.	4802	C<EV_H>, above.
3756		4803
3757	=item EV_EVENT_H	4804	=item EV_EVENT_H (h)
3758		4805
3759	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	4806	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
3760	of how the F<event.h> header can be found, the default is C<"event.h">.	4807	of how the F<event.h> header can be found, the default is C<"event.h">.
3761		4808
3762	=item EV_PROTOTYPES	4809	=item EV_PROTOTYPES (h)
3763		4810
3764	If defined to be C<0>, then F<ev.h> will not define any function	4811	If defined to be C<0>, then F<ev.h> will not define any function
3765	prototypes, but still define all the structs and other symbols. This is	4812	prototypes, but still define all the structs and other symbols. This is
3766	occasionally useful if you want to provide your own wrapper functions	4813	occasionally useful if you want to provide your own wrapper functions
3767	around libev functions.	4814	around libev functions.
…		…
3772	will have the C<struct ev_loop *> as first argument, and you can create	4819	will have the C<struct ev_loop *> as first argument, and you can create
3773	additional independent event loops. Otherwise there will be no support	4820	additional independent event loops. Otherwise there will be no support
3774	for multiple event loops and there is no first event loop pointer	4821	for multiple event loops and there is no first event loop pointer
3775	argument. Instead, all functions act on the single default loop.	4822	argument. Instead, all functions act on the single default loop.
3776		4823
		4824	Note that C<EV_DEFAULT> and C<EV_DEFAULT_> will no longer provide a
		4825	default loop when multiplicity is switched off - you always have to
		4826	initialise the loop manually in this case.
		4827
3777	=item EV_MINPRI	4828	=item EV_MINPRI
3778		4829
3779	=item EV_MAXPRI	4830	=item EV_MAXPRI
3780		4831
3781	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to	4832	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to
…		…
3789	fine.	4840	fine.
3790		4841
3791	If your embedding application does not need any priorities, defining these	4842	If your embedding application does not need any priorities, defining these
3792	both to C<0> will save some memory and CPU.	4843	both to C<0> will save some memory and CPU.
3793		4844
3794	=item EV_PERIODIC_ENABLE	4845	=item EV_PERIODIC_ENABLE, EV_IDLE_ENABLE, EV_EMBED_ENABLE, EV_STAT_ENABLE,
		4846	EV_PREPARE_ENABLE, EV_CHECK_ENABLE, EV_FORK_ENABLE, EV_SIGNAL_ENABLE,
		4847	EV_ASYNC_ENABLE, EV_CHILD_ENABLE.
3795		4848
3796	If undefined or defined to be C<1>, then periodic timers are supported. If	4849	If undefined or defined to be C<1> (and the platform supports it), then
3797	defined to be C<0>, then they are not. Disabling them saves a few kB of	4850	the respective watcher type is supported. If defined to be C<0>, then it
3798	code.	4851	is not. Disabling watcher types mainly saves code size.
3799		4852
3800	=item EV_IDLE_ENABLE	4853	=item EV_FEATURES
3801
3802	If undefined or defined to be C<1>, then idle watchers are supported. If
3803	defined to be C<0>, then they are not. Disabling them saves a few kB of
3804	code.
3805
3806	=item EV_EMBED_ENABLE
3807
3808	If undefined or defined to be C<1>, then embed watchers are supported. If
3809	defined to be C<0>, then they are not. Embed watchers rely on most other
3810	watcher types, which therefore must not be disabled.
3811
3812	=item EV_STAT_ENABLE
3813
3814	If undefined or defined to be C<1>, then stat watchers are supported. If
3815	defined to be C<0>, then they are not.
3816
3817	=item EV_FORK_ENABLE
3818
3819	If undefined or defined to be C<1>, then fork watchers are supported. If
3820	defined to be C<0>, then they are not.
3821
3822	=item EV_ASYNC_ENABLE
3823
3824	If undefined or defined to be C<1>, then async watchers are supported. If
3825	defined to be C<0>, then they are not.
3826
3827	=item EV_MINIMAL
3828		4854
3829	If you need to shave off some kilobytes of code at the expense of some	4855	If you need to shave off some kilobytes of code at the expense of some
3830	speed (but with the full API), define this symbol to C<1>. Currently this	4856	speed (but with the full API), you can define this symbol to request
3831	is used to override some inlining decisions, saves roughly 30% code size	4857	certain subsets of functionality. The default is to enable all features
3832	on amd64. It also selects a much smaller 2-heap for timer management over	4858	that can be enabled on the platform.
3833	the default 4-heap.
3834		4859
3835	You can save even more by disabling watcher types you do not need	4860	A typical way to use this symbol is to define it to C<0> (or to a bitset
3836	and setting C<EV_MAXPRI> == C<EV_MINPRI>. Also, disabling C<assert>	4861	with some broad features you want) and then selectively re-enable
3837	(C<-DNDEBUG>) will usually reduce code size a lot.	4862	additional parts you want, for example if you want everything minimal,
		4863	but multiple event loop support, async and child watchers and the poll
		4864	backend, use this:
3838		4865
3839	Defining C<EV_MINIMAL> to C<2> will additionally reduce the core API to	4866	#define EV_FEATURES 0
3840	provide a bare-bones event library. See C<ev.h> for details on what parts	4867	#define EV_MULTIPLICITY 1
3841	of the API are still available, and do not complain if this subset changes	4868	#define EV_USE_POLL 1
3842	over time.	4869	#define EV_CHILD_ENABLE 1
		4870	#define EV_ASYNC_ENABLE 1
		4871
		4872	The actual value is a bitset, it can be a combination of the following
		4873	values (by default, all of these are enabled):
		4874
		4875	=over 4
		4876
		4877	=item C<1> - faster/larger code
		4878
		4879	Use larger code to speed up some operations.
		4880
		4881	Currently this is used to override some inlining decisions (enlarging the
		4882	code size by roughly 30% on amd64).
		4883
		4884	When optimising for size, use of compiler flags such as C<-Os> with
		4885	gcc is recommended, as well as C<-DNDEBUG>, as libev contains a number of
		4886	assertions.
		4887
		4888	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4889	(e.g. gcc with C<-Os>).
		4890
		4891	=item C<2> - faster/larger data structures
		4892
		4893	Replaces the small 2-heap for timer management by a faster 4-heap, larger
		4894	hash table sizes and so on. This will usually further increase code size
		4895	and can additionally have an effect on the size of data structures at
		4896	runtime.
		4897
		4898	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4899	(e.g. gcc with C<-Os>).
		4900
		4901	=item C<4> - full API configuration
		4902
		4903	This enables priorities (sets C<EV_MAXPRI>=2 and C<EV_MINPRI>=-2), and
		4904	enables multiplicity (C<EV_MULTIPLICITY>=1).
		4905
		4906	=item C<8> - full API
		4907
		4908	This enables a lot of the "lesser used" API functions. See C<ev.h> for
		4909	details on which parts of the API are still available without this
		4910	feature, and do not complain if this subset changes over time.
		4911
		4912	=item C<16> - enable all optional watcher types
		4913
		4914	Enables all optional watcher types. If you want to selectively enable
		4915	only some watcher types other than I/O and timers (e.g. prepare,
		4916	embed, async, child...) you can enable them manually by defining
		4917	C<EV_watchertype_ENABLE> to C<1> instead.
		4918
		4919	=item C<32> - enable all backends
		4920
		4921	This enables all backends - without this feature, you need to enable at
		4922	least one backend manually (C<EV_USE_SELECT> is a good choice).
		4923
		4924	=item C<64> - enable OS-specific "helper" APIs
		4925
		4926	Enable inotify, eventfd, signalfd and similar OS-specific helper APIs by
		4927	default.
		4928
		4929	=back
		4930
		4931	Compiling with C<gcc -Os -DEV_STANDALONE -DEV_USE_EPOLL=1 -DEV_FEATURES=0>
		4932	reduces the compiled size of libev from 24.7Kb code/2.8Kb data to 6.5Kb
		4933	code/0.3Kb data on my GNU/Linux amd64 system, while still giving you I/O
		4934	watchers, timers and monotonic clock support.
		4935
		4936	With an intelligent-enough linker (gcc+binutils are intelligent enough
		4937	when you use C<-Wl,--gc-sections -ffunction-sections>) functions unused by
		4938	your program might be left out as well - a binary starting a timer and an
		4939	I/O watcher then might come out at only 5Kb.
		4940
		4941	=item EV_API_STATIC
		4942
		4943	If this symbol is defined (by default it is not), then all identifiers
		4944	will have static linkage. This means that libev will not export any
		4945	identifiers, and you cannot link against libev anymore. This can be useful
		4946	when you embed libev, only want to use libev functions in a single file,
		4947	and do not want its identifiers to be visible.
		4948
		4949	To use this, define C<EV_API_STATIC> and include F<ev.c> in the file that
		4950	wants to use libev.
		4951
		4952	This option only works when libev is compiled with a C compiler, as C++
		4953	doesn't support the required declaration syntax.
		4954
		4955	=item EV_AVOID_STDIO
		4956
		4957	If this is set to C<1> at compiletime, then libev will avoid using stdio
		4958	functions (printf, scanf, perror etc.). This will increase the code size
		4959	somewhat, but if your program doesn't otherwise depend on stdio and your
		4960	libc allows it, this avoids linking in the stdio library which is quite
		4961	big.
		4962
		4963	Note that error messages might become less precise when this option is
		4964	enabled.
3843		4965
3844	=item EV_NSIG	4966	=item EV_NSIG
3845		4967
3846	The highest supported signal number, +1 (or, the number of	4968	The highest supported signal number, +1 (or, the number of
3847	signals): Normally, libev tries to deduce the maximum number of signals	4969	signals): Normally, libev tries to deduce the maximum number of signals
3848	automatically, but sometimes this fails, in which case it can be	4970	automatically, but sometimes this fails, in which case it can be
3849	specified. Also, using a lower number than detected (C<32> should be	4971	specified. Also, using a lower number than detected (C<32> should be
3850	good for about any system in existance) can save some memory, as libev	4972	good for about any system in existence) can save some memory, as libev
3851	statically allocates some 12-24 bytes per signal number.	4973	statically allocates some 12-24 bytes per signal number.
3852		4974
3853	=item EV_PID_HASHSIZE	4975	=item EV_PID_HASHSIZE
3854		4976
3855	C<ev_child> watchers use a small hash table to distribute workload by	4977	C<ev_child> watchers use a small hash table to distribute workload by
3856	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	4978	pid. The default size is C<16> (or C<1> with C<EV_FEATURES> disabled),
3857	than enough. If you need to manage thousands of children you might want to	4979	usually more than enough. If you need to manage thousands of children you
3858	increase this value (I<must> be a power of two).	4980	might want to increase this value (I<must> be a power of two).
3859		4981
3860	=item EV_INOTIFY_HASHSIZE	4982	=item EV_INOTIFY_HASHSIZE
3861		4983
3862	C<ev_stat> watchers use a small hash table to distribute workload by	4984	C<ev_stat> watchers use a small hash table to distribute workload by
3863	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	4985	inotify watch id. The default size is C<16> (or C<1> with C<EV_FEATURES>
3864	usually more than enough. If you need to manage thousands of C<ev_stat>	4986	disabled), usually more than enough. If you need to manage thousands of
3865	watchers you might want to increase this value (I<must> be a power of	4987	C<ev_stat> watchers you might want to increase this value (I<must> be a
3866	two).	4988	power of two).
3867		4989
3868	=item EV_USE_4HEAP	4990	=item EV_USE_4HEAP
3869		4991
3870	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4992	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3871	timer and periodics heaps, libev uses a 4-heap when this symbol is defined	4993	timer and periodics heaps, libev uses a 4-heap when this symbol is defined
3872	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably	4994	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably
3873	faster performance with many (thousands) of watchers.	4995	faster performance with many (thousands) of watchers.
3874		4996
3875	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4997	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3876	(disabled).	4998	will be C<0>.
3877		4999
3878	=item EV_HEAP_CACHE_AT	5000	=item EV_HEAP_CACHE_AT
3879		5001
3880	Heaps are not very cache-efficient. To improve the cache-efficiency of the	5002	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3881	timer and periodics heaps, libev can cache the timestamp (I<at>) within	5003	timer and periodics heaps, libev can cache the timestamp (I<at>) within
3882	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),	5004	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
3883	which uses 8-12 bytes more per watcher and a few hundred bytes more code,	5005	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
3884	but avoids random read accesses on heap changes. This improves performance	5006	but avoids random read accesses on heap changes. This improves performance
3885	noticeably with many (hundreds) of watchers.	5007	noticeably with many (hundreds) of watchers.
3886		5008
3887	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	5009	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3888	(disabled).	5010	will be C<0>.
3889		5011
3890	=item EV_VERIFY	5012	=item EV_VERIFY
3891		5013
3892	Controls how much internal verification (see C<ev_loop_verify ()>) will	5014	Controls how much internal verification (see C<ev_verify ()>) will
3893	be done: If set to C<0>, no internal verification code will be compiled	5015	be done: If set to C<0>, no internal verification code will be compiled
3894	in. If set to C<1>, then verification code will be compiled in, but not	5016	in. If set to C<1>, then verification code will be compiled in, but not
3895	called. If set to C<2>, then the internal verification code will be	5017	called. If set to C<2>, then the internal verification code will be
3896	called once per loop, which can slow down libev. If set to C<3>, then the	5018	called once per loop, which can slow down libev. If set to C<3>, then the
3897	verification code will be called very frequently, which will slow down	5019	verification code will be called very frequently, which will slow down
3898	libev considerably.	5020	libev considerably.
3899		5021
		5022	Verification errors are reported via C's C<assert> mechanism, so if you
		5023	disable that (e.g. by defining C<NDEBUG>) then no errors will be reported.
		5024
3900	The default is C<1>, unless C<EV_MINIMAL> is set, in which case it will be	5025	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3901	C<0>.	5026	will be C<0>.
3902		5027
3903	=item EV_COMMON	5028	=item EV_COMMON
3904		5029
3905	By default, all watchers have a C<void *data> member. By redefining	5030	By default, all watchers have a C<void *data> member. By redefining
3906	this macro to a something else you can include more and other types of	5031	this macro to something else you can include more and other types of
3907	members. You have to define it each time you include one of the files,	5032	members. You have to define it each time you include one of the files,
3908	though, and it must be identical each time.	5033	though, and it must be identical each time.
3909		5034
3910	For example, the perl EV module uses something like this:	5035	For example, the perl EV module uses something like this:
3911		5036
…		…
3964	file.	5089	file.
3965		5090
3966	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	5091	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
3967	that everybody includes and which overrides some configure choices:	5092	that everybody includes and which overrides some configure choices:
3968		5093
3969	#define EV_MINIMAL 1	5094	#define EV_FEATURES 8
3970	#define EV_USE_POLL 0	5095	#define EV_USE_SELECT 1
3971	#define EV_MULTIPLICITY 0
3972	#define EV_PERIODIC_ENABLE 0	5096	#define EV_PREPARE_ENABLE 1
		5097	#define EV_IDLE_ENABLE 1
3973	#define EV_STAT_ENABLE 0	5098	#define EV_SIGNAL_ENABLE 1
3974	#define EV_FORK_ENABLE 0	5099	#define EV_CHILD_ENABLE 1
		5100	#define EV_USE_STDEXCEPT 0
3975	#define EV_CONFIG_H <config.h>	5101	#define EV_CONFIG_H <config.h>
3976	#define EV_MINPRI 0
3977	#define EV_MAXPRI 0
3978		5102
3979	#include "ev++.h"	5103	#include "ev++.h"
3980		5104
3981	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	5105	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
3982		5106
3983	#include "ev_cpp.h"	5107	#include "ev_cpp.h"
3984	#include "ev.c"	5108	#include "ev.c"
3985		5109
3986	=head1 INTERACTION WITH OTHER PROGRAMS OR LIBRARIES	5110	=head1 INTERACTION WITH OTHER PROGRAMS, LIBRARIES OR THE ENVIRONMENT
3987		5111
3988	=head2 THREADS AND COROUTINES	5112	=head2 THREADS AND COROUTINES
3989		5113
3990	=head3 THREADS	5114	=head3 THREADS
3991		5115
…		…
4042	default loop and triggering an C<ev_async> watcher from the default loop	5166	default loop and triggering an C<ev_async> watcher from the default loop
4043	watcher callback into the event loop interested in the signal.	5167	watcher callback into the event loop interested in the signal.
4044		5168
4045	=back	5169	=back
4046		5170
4047	=head4 THREAD LOCKING EXAMPLE	5171	See also L</THREAD LOCKING EXAMPLE>.
4048
4049	Here is a fictitious example of how to run an event loop in a different
4050	thread than where callbacks are being invoked and watchers are
4051	created/added/removed.
4052
4053	For a real-world example, see the C<EV::Loop::Async> perl module,
4054	which uses exactly this technique (which is suited for many high-level
4055	languages).
4056
4057	The example uses a pthread mutex to protect the loop data, a condition
4058	variable to wait for callback invocations, an async watcher to notify the
4059	event loop thread and an unspecified mechanism to wake up the main thread.
4060
4061	First, you need to associate some data with the event loop:
4062
4063	typedef struct {
4064	mutex_t lock; /* global loop lock */
4065	ev_async async_w;
4066	thread_t tid;
4067	cond_t invoke_cv;
4068	} userdata;
4069
4070	void prepare_loop (EV_P)
4071	{
4072	// for simplicity, we use a static userdata struct.
4073	static userdata u;
4074
4075	ev_async_init (&u->async_w, async_cb);
4076	ev_async_start (EV_A_ &u->async_w);
4077
4078	pthread_mutex_init (&u->lock, 0);
4079	pthread_cond_init (&u->invoke_cv, 0);
4080
4081	// now associate this with the loop
4082	ev_set_userdata (EV_A_ u);
4083	ev_set_invoke_pending_cb (EV_A_ l_invoke);
4084	ev_set_loop_release_cb (EV_A_ l_release, l_acquire);
4085
4086	// then create the thread running ev_loop
4087	pthread_create (&u->tid, 0, l_run, EV_A);
4088	}
4089
4090	The callback for the C<ev_async> watcher does nothing: the watcher is used
4091	solely to wake up the event loop so it takes notice of any new watchers
4092	that might have been added:
4093
4094	static void
4095	async_cb (EV_P_ ev_async *w, int revents)
4096	{
4097	// just used for the side effects
4098	}
4099
4100	The C<l_release> and C<l_acquire> callbacks simply unlock/lock the mutex
4101	protecting the loop data, respectively.
4102
4103	static void
4104	l_release (EV_P)
4105	{
4106	userdata *u = ev_userdata (EV_A);
4107	pthread_mutex_unlock (&u->lock);
4108	}
4109
4110	static void
4111	l_acquire (EV_P)
4112	{
4113	userdata *u = ev_userdata (EV_A);
4114	pthread_mutex_lock (&u->lock);
4115	}
4116
4117	The event loop thread first acquires the mutex, and then jumps straight
4118	into C<ev_loop>:
4119
4120	void *
4121	l_run (void *thr_arg)
4122	{
4123	struct ev_loop *loop = (struct ev_loop *)thr_arg;
4124
4125	l_acquire (EV_A);
4126	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
4127	ev_loop (EV_A_ 0);
4128	l_release (EV_A);
4129
4130	return 0;
4131	}
4132
4133	Instead of invoking all pending watchers, the C<l_invoke> callback will
4134	signal the main thread via some unspecified mechanism (signals? pipe
4135	writes? C<Async::Interrupt>?) and then waits until all pending watchers
4136	have been called (in a while loop because a) spurious wakeups are possible
4137	and b) skipping inter-thread-communication when there are no pending
4138	watchers is very beneficial):
4139
4140	static void
4141	l_invoke (EV_P)
4142	{
4143	userdata *u = ev_userdata (EV_A);
4144
4145	while (ev_pending_count (EV_A))
4146	{
4147	wake_up_other_thread_in_some_magic_or_not_so_magic_way ();
4148	pthread_cond_wait (&u->invoke_cv, &u->lock);
4149	}
4150	}
4151
4152	Now, whenever the main thread gets told to invoke pending watchers, it
4153	will grab the lock, call C<ev_invoke_pending> and then signal the loop
4154	thread to continue:
4155
4156	static void
4157	real_invoke_pending (EV_P)
4158	{
4159	userdata *u = ev_userdata (EV_A);
4160
4161	pthread_mutex_lock (&u->lock);
4162	ev_invoke_pending (EV_A);
4163	pthread_cond_signal (&u->invoke_cv);
4164	pthread_mutex_unlock (&u->lock);
4165	}
4166
4167	Whenever you want to start/stop a watcher or do other modifications to an
4168	event loop, you will now have to lock:
4169
4170	ev_timer timeout_watcher;
4171	userdata *u = ev_userdata (EV_A);
4172
4173	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
4174
4175	pthread_mutex_lock (&u->lock);
4176	ev_timer_start (EV_A_ &timeout_watcher);
4177	ev_async_send (EV_A_ &u->async_w);
4178	pthread_mutex_unlock (&u->lock);
4179
4180	Note that sending the C<ev_async> watcher is required because otherwise
4181	an event loop currently blocking in the kernel will have no knowledge
4182	about the newly added timer. By waking up the loop it will pick up any new
4183	watchers in the next event loop iteration.
4184		5172
4185	=head3 COROUTINES	5173	=head3 COROUTINES
4186		5174
4187	Libev is very accommodating to coroutines ("cooperative threads"):	5175	Libev is very accommodating to coroutines ("cooperative threads"):
4188	libev fully supports nesting calls to its functions from different	5176	libev fully supports nesting calls to its functions from different
4189	coroutines (e.g. you can call C<ev_loop> on the same loop from two	5177	coroutines (e.g. you can call C<ev_run> on the same loop from two
4190	different coroutines, and switch freely between both coroutines running	5178	different coroutines, and switch freely between both coroutines running
4191	the loop, as long as you don't confuse yourself). The only exception is	5179	the loop, as long as you don't confuse yourself). The only exception is
4192	that you must not do this from C<ev_periodic> reschedule callbacks.	5180	that you must not do this from C<ev_periodic> reschedule callbacks.
4193		5181
4194	Care has been taken to ensure that libev does not keep local state inside	5182	Care has been taken to ensure that libev does not keep local state inside
4195	C<ev_loop>, and other calls do not usually allow for coroutine switches as	5183	C<ev_run>, and other calls do not usually allow for coroutine switches as
4196	they do not call any callbacks.	5184	they do not call any callbacks.
4197		5185
4198	=head2 COMPILER WARNINGS	5186	=head2 COMPILER WARNINGS
4199		5187
4200	Depending on your compiler and compiler settings, you might get no or a	5188	Depending on your compiler and compiler settings, you might get no or a
…		…
4211	maintainable.	5199	maintainable.
4212		5200
4213	And of course, some compiler warnings are just plain stupid, or simply	5201	And of course, some compiler warnings are just plain stupid, or simply
4214	wrong (because they don't actually warn about the condition their message	5202	wrong (because they don't actually warn about the condition their message
4215	seems to warn about). For example, certain older gcc versions had some	5203	seems to warn about). For example, certain older gcc versions had some
4216	warnings that resulted an extreme number of false positives. These have	5204	warnings that resulted in an extreme number of false positives. These have
4217	been fixed, but some people still insist on making code warn-free with	5205	been fixed, but some people still insist on making code warn-free with
4218	such buggy versions.	5206	such buggy versions.
4219		5207
4220	While libev is written to generate as few warnings as possible,	5208	While libev is written to generate as few warnings as possible,
4221	"warn-free" code is not a goal, and it is recommended not to build libev	5209	"warn-free" code is not a goal, and it is recommended not to build libev
…		…
4257	I suggest using suppression lists.	5245	I suggest using suppression lists.
4258		5246
4259		5247
4260	=head1 PORTABILITY NOTES	5248	=head1 PORTABILITY NOTES
4261		5249
		5250	=head2 GNU/LINUX 32 BIT LIMITATIONS
		5251
		5252	GNU/Linux is the only common platform that supports 64 bit file/large file
		5253	interfaces but I<disables> them by default.
		5254
		5255	That means that libev compiled in the default environment doesn't support
		5256	files larger than 2GiB or so, which mainly affects C<ev_stat> watchers.
		5257
		5258	Unfortunately, many programs try to work around this GNU/Linux issue
		5259	by enabling the large file API, which makes them incompatible with the
		5260	standard libev compiled for their system.
		5261
		5262	Likewise, libev cannot enable the large file API itself as this would
		5263	suddenly make it incompatible to the default compile time environment,
		5264	i.e. all programs not using special compile switches.
		5265
		5266	=head2 OS/X AND DARWIN BUGS
		5267
		5268	The whole thing is a bug if you ask me - basically any system interface
		5269	you touch is broken, whether it is locales, poll, kqueue or even the
		5270	OpenGL drivers.
		5271
		5272	=head3 C<kqueue> is buggy
		5273
		5274	The kqueue syscall is broken in all known versions - most versions support
		5275	only sockets, many support pipes.
		5276
		5277	Libev tries to work around this by not using C<kqueue> by default on this
		5278	rotten platform, but of course you can still ask for it when creating a
		5279	loop - embedding a socket-only kqueue loop into a select-based one is
		5280	probably going to work well.
		5281
		5282	=head3 C<poll> is buggy
		5283
		5284	Instead of fixing C<kqueue>, Apple replaced their (working) C<poll>
		5285	implementation by something calling C<kqueue> internally around the 10.5.6
		5286	release, so now C<kqueue> I<and> C<poll> are broken.
		5287
		5288	Libev tries to work around this by not using C<poll> by default on
		5289	this rotten platform, but of course you can still ask for it when creating
		5290	a loop.
		5291
		5292	=head3 C<select> is buggy
		5293
		5294	All that's left is C<select>, and of course Apple found a way to fuck this
		5295	one up as well: On OS/X, C<select> actively limits the number of file
		5296	descriptors you can pass in to 1024 - your program suddenly crashes when
		5297	you use more.
		5298
		5299	There is an undocumented "workaround" for this - defining
		5300	C<_DARWIN_UNLIMITED_SELECT>, which libev tries to use, so select I<should>
		5301	work on OS/X.
		5302
		5303	=head2 SOLARIS PROBLEMS AND WORKAROUNDS
		5304
		5305	=head3 C<errno> reentrancy
		5306
		5307	The default compile environment on Solaris is unfortunately so
		5308	thread-unsafe that you can't even use components/libraries compiled
		5309	without C<-D_REENTRANT> in a threaded program, which, of course, isn't
		5310	defined by default. A valid, if stupid, implementation choice.
		5311
		5312	If you want to use libev in threaded environments you have to make sure
		5313	it's compiled with C<_REENTRANT> defined.
		5314
		5315	=head3 Event port backend
		5316
		5317	The scalable event interface for Solaris is called "event
		5318	ports". Unfortunately, this mechanism is very buggy in all major
		5319	releases. If you run into high CPU usage, your program freezes or you get
		5320	a large number of spurious wakeups, make sure you have all the relevant
		5321	and latest kernel patches applied. No, I don't know which ones, but there
		5322	are multiple ones to apply, and afterwards, event ports actually work
		5323	great.
		5324
		5325	If you can't get it to work, you can try running the program by setting
		5326	the environment variable C<LIBEV_FLAGS=3> to only allow C<poll> and
		5327	C<select> backends.
		5328
		5329	=head2 AIX POLL BUG
		5330
		5331	AIX unfortunately has a broken C<poll.h> header. Libev works around
		5332	this by trying to avoid the poll backend altogether (i.e. it's not even
		5333	compiled in), which normally isn't a big problem as C<select> works fine
		5334	with large bitsets on AIX, and AIX is dead anyway.
		5335
4262	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS	5336	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
		5337
		5338	=head3 General issues
4263		5339
4264	Win32 doesn't support any of the standards (e.g. POSIX) that libev	5340	Win32 doesn't support any of the standards (e.g. POSIX) that libev
4265	requires, and its I/O model is fundamentally incompatible with the POSIX	5341	requires, and its I/O model is fundamentally incompatible with the POSIX
4266	model. Libev still offers limited functionality on this platform in	5342	model. Libev still offers limited functionality on this platform in
4267	the form of the C<EVBACKEND_SELECT> backend, and only supports socket	5343	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
4268	descriptors. This only applies when using Win32 natively, not when using	5344	descriptors. This only applies when using Win32 natively, not when using
4269	e.g. cygwin.	5345	e.g. cygwin. Actually, it only applies to the microsofts own compilers,
		5346	as every compiler comes with a slightly differently broken/incompatible
		5347	environment.
4270		5348
4271	Lifting these limitations would basically require the full	5349	Lifting these limitations would basically require the full
4272	re-implementation of the I/O system. If you are into these kinds of	5350	re-implementation of the I/O system. If you are into this kind of thing,
4273	things, then note that glib does exactly that for you in a very portable	5351	then note that glib does exactly that for you in a very portable way (note
4274	way (note also that glib is the slowest event library known to man).	5352	also that glib is the slowest event library known to man).
4275		5353
4276	There is no supported compilation method available on windows except	5354	There is no supported compilation method available on windows except
4277	embedding it into other applications.	5355	embedding it into other applications.
4278		5356
4279	Sensible signal handling is officially unsupported by Microsoft - libev	5357	Sensible signal handling is officially unsupported by Microsoft - libev
…		…
4307	you do I<not> compile the F<ev.c> or any other embedded source files!):	5385	you do I<not> compile the F<ev.c> or any other embedded source files!):
4308		5386
4309	#include "evwrap.h"	5387	#include "evwrap.h"
4310	#include "ev.c"	5388	#include "ev.c"
4311		5389
4312	=over 4
4313
4314	=item The winsocket select function	5390	=head3 The winsocket C<select> function
4315		5391
4316	The winsocket C<select> function doesn't follow POSIX in that it	5392	The winsocket C<select> function doesn't follow POSIX in that it
4317	requires socket I<handles> and not socket I<file descriptors> (it is	5393	requires socket I<handles> and not socket I<file descriptors> (it is
4318	also extremely buggy). This makes select very inefficient, and also	5394	also extremely buggy). This makes select very inefficient, and also
4319	requires a mapping from file descriptors to socket handles (the Microsoft	5395	requires a mapping from file descriptors to socket handles (the Microsoft
…		…
4328	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */	5404	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
4329		5405
4330	Note that winsockets handling of fd sets is O(n), so you can easily get a	5406	Note that winsockets handling of fd sets is O(n), so you can easily get a
4331	complexity in the O(n²) range when using win32.	5407	complexity in the O(n²) range when using win32.
4332		5408
4333	=item Limited number of file descriptors	5409	=head3 Limited number of file descriptors
4334		5410
4335	Windows has numerous arbitrary (and low) limits on things.	5411	Windows has numerous arbitrary (and low) limits on things.
4336		5412
4337	Early versions of winsocket's select only supported waiting for a maximum	5413	Early versions of winsocket's select only supported waiting for a maximum
4338	of C<64> handles (probably owning to the fact that all windows kernels	5414	of C<64> handles (probably owning to the fact that all windows kernels
…		…
4353	runtime libraries. This might get you to about C<512> or C<2048> sockets	5429	runtime libraries. This might get you to about C<512> or C<2048> sockets
4354	(depending on windows version and/or the phase of the moon). To get more,	5430	(depending on windows version and/or the phase of the moon). To get more,
4355	you need to wrap all I/O functions and provide your own fd management, but	5431	you need to wrap all I/O functions and provide your own fd management, but
4356	the cost of calling select (O(n²)) will likely make this unworkable.	5432	the cost of calling select (O(n²)) will likely make this unworkable.
4357		5433
4358	=back
4359
4360	=head2 PORTABILITY REQUIREMENTS	5434	=head2 PORTABILITY REQUIREMENTS
4361		5435
4362	In addition to a working ISO-C implementation and of course the	5436	In addition to a working ISO-C implementation and of course the
4363	backend-specific APIs, libev relies on a few additional extensions:	5437	backend-specific APIs, libev relies on a few additional extensions:
4364		5438
…		…
4370	Libev assumes not only that all watcher pointers have the same internal	5444	Libev assumes not only that all watcher pointers have the same internal
4371	structure (guaranteed by POSIX but not by ISO C for example), but it also	5445	structure (guaranteed by POSIX but not by ISO C for example), but it also
4372	assumes that the same (machine) code can be used to call any watcher	5446	assumes that the same (machine) code can be used to call any watcher
4373	callback: The watcher callbacks have different type signatures, but libev	5447	callback: The watcher callbacks have different type signatures, but libev
4374	calls them using an C<ev_watcher *> internally.	5448	calls them using an C<ev_watcher *> internally.
		5449
		5450	=item null pointers and integer zero are represented by 0 bytes
		5451
		5452	Libev uses C<memset> to initialise structs and arrays to C<0> bytes, and
		5453	relies on this setting pointers and integers to null.
		5454
		5455	=item pointer accesses must be thread-atomic
		5456
		5457	Accessing a pointer value must be atomic, it must both be readable and
		5458	writable in one piece - this is the case on all current architectures.
4375		5459
4376	=item C<sig_atomic_t volatile> must be thread-atomic as well	5460	=item C<sig_atomic_t volatile> must be thread-atomic as well
4377		5461
4378	The type C<sig_atomic_t volatile> (or whatever is defined as	5462	The type C<sig_atomic_t volatile> (or whatever is defined as
4379	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different	5463	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different
…		…
4388	thread" or will block signals process-wide, both behaviours would	5472	thread" or will block signals process-wide, both behaviours would
4389	be compatible with libev. Interaction between C<sigprocmask> and	5473	be compatible with libev. Interaction between C<sigprocmask> and
4390	C<pthread_sigmask> could complicate things, however.	5474	C<pthread_sigmask> could complicate things, however.
4391		5475
4392	The most portable way to handle signals is to block signals in all threads	5476	The most portable way to handle signals is to block signals in all threads
4393	except the initial one, and run the default loop in the initial thread as	5477	except the initial one, and run the signal handling loop in the initial
4394	well.	5478	thread as well.
4395		5479
4396	=item C<long> must be large enough for common memory allocation sizes	5480	=item C<long> must be large enough for common memory allocation sizes
4397		5481
4398	To improve portability and simplify its API, libev uses C<long> internally	5482	To improve portability and simplify its API, libev uses C<long> internally
4399	instead of C<size_t> when allocating its data structures. On non-POSIX	5483	instead of C<size_t> when allocating its data structures. On non-POSIX
…		…
4402	watchers.	5486	watchers.
4403		5487
4404	=item C<double> must hold a time value in seconds with enough accuracy	5488	=item C<double> must hold a time value in seconds with enough accuracy
4405		5489
4406	The type C<double> is used to represent timestamps. It is required to	5490	The type C<double> is used to represent timestamps. It is required to
4407	have at least 51 bits of mantissa (and 9 bits of exponent), which is good	5491	have at least 51 bits of mantissa (and 9 bits of exponent), which is
4408	enough for at least into the year 4000. This requirement is fulfilled by	5492	good enough for at least into the year 4000 with millisecond accuracy
		5493	(the design goal for libev). This requirement is overfulfilled by
4409	implementations implementing IEEE 754, which is basically all existing	5494	implementations using IEEE 754, which is basically all existing ones.
		5495
4410	ones. With IEEE 754 doubles, you get microsecond accuracy until at least	5496	With IEEE 754 doubles, you get microsecond accuracy until at least the
4411	2200.	5497	year 2255 (and millisecond accuracy till the year 287396 - by then, libev
		5498	is either obsolete or somebody patched it to use C<long double> or
		5499	something like that, just kidding).
4412		5500
4413	=back	5501	=back
4414		5502
4415	If you know of other additional requirements drop me a note.	5503	If you know of other additional requirements drop me a note.
4416		5504
…		…
4478	=item Processing ev_async_send: O(number_of_async_watchers)	5566	=item Processing ev_async_send: O(number_of_async_watchers)
4479		5567
4480	=item Processing signals: O(max_signal_number)	5568	=item Processing signals: O(max_signal_number)
4481		5569
4482	Sending involves a system call I<iff> there were no other C<ev_async_send>	5570	Sending involves a system call I<iff> there were no other C<ev_async_send>
4483	calls in the current loop iteration. Checking for async and signal events	5571	calls in the current loop iteration and the loop is currently
		5572	blocked. Checking for async and signal events involves iterating over all
4484	involves iterating over all running async watchers or all signal numbers.	5573	running async watchers or all signal numbers.
4485		5574
4486	=back	5575	=back
4487		5576
4488		5577
		5578	=head1 PORTING FROM LIBEV 3.X TO 4.X
		5579
		5580	The major version 4 introduced some incompatible changes to the API.
		5581
		5582	At the moment, the C<ev.h> header file provides compatibility definitions
		5583	for all changes, so most programs should still compile. The compatibility
		5584	layer might be removed in later versions of libev, so better update to the
		5585	new API early than late.
		5586
		5587	=over 4
		5588
		5589	=item C<EV_COMPAT3> backwards compatibility mechanism
		5590
		5591	The backward compatibility mechanism can be controlled by
		5592	C<EV_COMPAT3>. See L</"PREPROCESSOR SYMBOLS/MACROS"> in the L</EMBEDDING>
		5593	section.
		5594
		5595	=item C<ev_default_destroy> and C<ev_default_fork> have been removed
		5596
		5597	These calls can be replaced easily by their C<ev_loop_xxx> counterparts:
		5598
		5599	ev_loop_destroy (EV_DEFAULT_UC);
		5600	ev_loop_fork (EV_DEFAULT);
		5601
		5602	=item function/symbol renames
		5603
		5604	A number of functions and symbols have been renamed:
		5605
		5606	ev_loop => ev_run
		5607	EVLOOP_NONBLOCK => EVRUN_NOWAIT
		5608	EVLOOP_ONESHOT => EVRUN_ONCE
		5609
		5610	ev_unloop => ev_break
		5611	EVUNLOOP_CANCEL => EVBREAK_CANCEL
		5612	EVUNLOOP_ONE => EVBREAK_ONE
		5613	EVUNLOOP_ALL => EVBREAK_ALL
		5614
		5615	EV_TIMEOUT => EV_TIMER
		5616
		5617	ev_loop_count => ev_iteration
		5618	ev_loop_depth => ev_depth
		5619	ev_loop_verify => ev_verify
		5620
		5621	Most functions working on C<struct ev_loop> objects don't have an
		5622	C<ev_loop_> prefix, so it was removed; C<ev_loop>, C<ev_unloop> and
		5623	associated constants have been renamed to not collide with the C<struct
		5624	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme
		5625	as all other watcher types. Note that C<ev_loop_fork> is still called
		5626	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>
		5627	typedef.
		5628
		5629	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>
		5630
		5631	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different
		5632	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile
		5633	and work, but the library code will of course be larger.
		5634
		5635	=back
		5636
		5637
4489	=head1 GLOSSARY	5638	=head1 GLOSSARY
4490		5639
4491	=over 4	5640	=over 4
4492		5641
4493	=item active	5642	=item active
4494		5643
4495	A watcher is active as long as it has been started (has been attached to	5644	A watcher is active as long as it has been started and not yet stopped.
4496	an event loop) but not yet stopped (disassociated from the event loop).	5645	See L</WATCHER STATES> for details.
4497		5646
4498	=item application	5647	=item application
4499		5648
4500	In this document, an application is whatever is using libev.	5649	In this document, an application is whatever is using libev.
		5650
		5651	=item backend
		5652
		5653	The part of the code dealing with the operating system interfaces.
4501		5654
4502	=item callback	5655	=item callback
4503		5656
4504	The address of a function that is called when some event has been	5657	The address of a function that is called when some event has been
4505	detected. Callbacks are being passed the event loop, the watcher that	5658	detected. Callbacks are being passed the event loop, the watcher that
4506	received the event, and the actual event bitset.	5659	received the event, and the actual event bitset.
4507		5660
4508	=item callback invocation	5661	=item callback/watcher invocation
4509		5662
4510	The act of calling the callback associated with a watcher.	5663	The act of calling the callback associated with a watcher.
4511		5664
4512	=item event	5665	=item event
4513		5666
4514	A change of state of some external event, such as data now being available	5667	A change of state of some external event, such as data now being available
4515	for reading on a file descriptor, time having passed or simply not having	5668	for reading on a file descriptor, time having passed or simply not having
4516	any other events happening anymore.	5669	any other events happening anymore.
4517		5670
4518	In libev, events are represented as single bits (such as C<EV_READ> or	5671	In libev, events are represented as single bits (such as C<EV_READ> or
4519	C<EV_TIMEOUT>).	5672	C<EV_TIMER>).
4520		5673
4521	=item event library	5674	=item event library
4522		5675
4523	A software package implementing an event model and loop.	5676	A software package implementing an event model and loop.
4524		5677
…		…
4532	The model used to describe how an event loop handles and processes	5685	The model used to describe how an event loop handles and processes
4533	watchers and events.	5686	watchers and events.
4534		5687
4535	=item pending	5688	=item pending
4536		5689
4537	A watcher is pending as soon as the corresponding event has been detected,	5690	A watcher is pending as soon as the corresponding event has been
4538	and stops being pending as soon as the watcher will be invoked or its	5691	detected. See L</WATCHER STATES> for details.
4539	pending status is explicitly cleared by the application.
4540
4541	A watcher can be pending, but not active. Stopping a watcher also clears
4542	its pending status.
4543		5692
4544	=item real time	5693	=item real time
4545		5694
4546	The physical time that is observed. It is apparently strictly monotonic :)	5695	The physical time that is observed. It is apparently strictly monotonic :)
4547		5696
4548	=item wall-clock time	5697	=item wall-clock time
4549		5698
4550	The time and date as shown on clocks. Unlike real time, it can actually	5699	The time and date as shown on clocks. Unlike real time, it can actually
4551	be wrong and jump forwards and backwards, e.g. when the you adjust your	5700	be wrong and jump forwards and backwards, e.g. when you adjust your
4552	clock.	5701	clock.
4553		5702
4554	=item watcher	5703	=item watcher
4555		5704
4556	A data structure that describes interest in certain events. Watchers need	5705	A data structure that describes interest in certain events. Watchers need
4557	to be started (attached to an event loop) before they can receive events.	5706	to be started (attached to an event loop) before they can receive events.
4558		5707
4559	=item watcher invocation
4560
4561	The act of calling the callback associated with a watcher.
4562
4563	=back	5708	=back
4564		5709
4565	=head1 AUTHOR	5710	=head1 AUTHOR
4566		5711
4567	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael Magnusson.	5712	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael
		5713	Magnusson and Emanuele Giaquinta, and minor corrections by many others.
4568		5714

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines