[ViewVC] Diff of: cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.12 by root, Mon Nov 12 08:35:18 2007 UTC vs.
Revision 1.27 by root, Wed Nov 14 05:02:07 2007 UTC

 F<README.embed> in the libev distribution. If libev was configured without
 support for multiple event loops, then all functions taking an initial
 argument of name C<loop> (which is always of type C<struct ev_loop *>)
 will not have this argument.
-=head1 TIME AND OTHER GLOBAL FUNCTIONS
+=head1 TIME REPRESENTATION
 Libev represents time as a single floating point number, representing the
 (fractional) number of seconds since the (POSIX) epoch (somewhere near
 the beginning of 1970, details are complicated, don't ask). This type is
 called C<ev_tstamp>, which is what you should use too. It usually aliases
 to the double type in C.
+=head1 GLOBAL FUNCTIONS
+These functions can be called anytime, even before initialising the
+library in any way.
 =over 4
 =item ev_tstamp ev_time ()
-Returns the current time as libev would use it.
+Returns the current time as libev would use it. Please note that the
+C<ev_now> function is usually faster and also often returns the timestamp
+you actually want to know.
 =item int ev_version_major ()
 =item int ev_version_minor ()
 An event loop is described by a C<struct ev_loop *>. The library knows two
 types of such loops, the I<default> loop, which supports signals and child
 events, and dynamically created loops which do not.
 If you use threads, a common model is to run the default event loop
-in your main thread (or in a separate thrad) and for each thread you
+in your main thread (or in a separate thread) and for each thread you
 create, you also create another event loop. Libev itself does no locking
 whatsoever, so if you mix calls to the same event loop in different
 threads, make sure you lock (this is usually a bad idea, though, even if
 done correctly, because it's hideous and inefficient).
 This flags value could be used to implement alternative looping
 constructs, but the C<prepare> and C<check> watchers provide a better and
 more generic mechanism.
+Here are the gory details of what ev_loop does:
+   1. If there are no active watchers (reference count is zero), return.
+   2. Queue and immediately call all prepare watchers.
+   3. If we have been forked, recreate the kernel state.
+   4. Update the kernel state with all outstanding changes.
+   5. Update the "event loop time".
+   6. Calculate for how long to block.
+   7. Block the process, waiting for events.
+   8. Update the "event loop time" and do time jump handling.
+   9. Queue all outstanding timers.
+  10. Queue all outstanding periodics.
+  11. If no events are pending now, queue all idle watchers.
+  12. Queue all check watchers.
+  13. Call all queued watchers in reverse order (i.e. check watchers first).
+  14. If ev_unloop has been called or EVLOOP_ONESHOT or EVLOOP_NONBLOCK
+      was used, return, otherwise continue with step #1.
 =item ev_unloop (loop, how)
 Can be used to make a call to C<ev_loop> return early (but only after it
 has processed all outstanding events). The C<how> argument must be either
-C<EVUNLOOP_ONCE>, which will make the innermost C<ev_loop> call return, or
+C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or
 C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.
 =item ev_ref (loop)
 =item ev_unref (loop)
 As long as your watcher is active (has been started but not stopped) you
 must not touch the values stored in it. Most specifically you must never
 reinitialise it or call its set method.
-You cna check whether an event is active by calling the C<ev_is_active
+You can check whether an event is active by calling the C<ev_is_active
 (watcher *)> macro. To see whether an event is outstanding (but the
-callback for it has not been called yet) you cna use the C<ev_is_pending
+callback for it has not been called yet) you can use the C<ev_is_pending
 (watcher *)> macro.
 Each and every callback receives the event loop pointer as first, the
 registered watcher structure as second, and a bitset of received events as
 third argument.
-The rceeived events usually include a single bit per event type received
+The received events usually include a single bit per event type received
 (you can receive multiple events at the same time). The possible bit masks
 are:
 =over 4
 =back
 =head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
 Each watcher has, by default, a member C<void *data> that you can change
-and read at any time, libev will completely ignore it. This cna be used
+and read at any time, libev will completely ignore it. This can be used
 to associate arbitrary data with your watcher. If you need more data and
 don't want to allocate memory and store a pointer to it in that data
 member, you can also "subclass" the watcher type and provide your own
 data:
 =head2 C<ev_io> - is this file descriptor readable or writable
 I/O watchers check whether a file descriptor is readable or writable
 in each iteration of the event loop (This behaviour is called
 level-triggering because you keep receiving events as long as the
-condition persists. Remember you cna stop the watcher if you don't want to
+condition persists. Remember you can stop the watcher if you don't want to
 act on the event and neither want to receive future events).
-In general you can register as many read and/or write event watchers oer
+In general you can register as many read and/or write event watchers per
 fd as you want (as long as you don't confuse yourself). Setting all file
 descriptors to non-blocking mode is also usually a good idea (but not
 required if you know what you are doing).
 You have to be careful with dup'ed file descriptors, though. Some backends
 (the linux epoll backend is a notable example) cannot handle dup'ed file
 descriptors correctly if you register interest in two or more fds pointing
-to the same file/socket etc. description.
+to the same underlying file/socket etc. description (that is, they share
+the same underlying "file open").
 If you must do this, then force the use of a known-to-be-good backend
 (at the time of this writing, this includes only EVMETHOD_SELECT and
 EVMETHOD_POLL).
 Timer watchers are simple relative timers that generate an event after a
 given time, and optionally repeating in regular intervals after that.
 The timers are based on real time, that is, if you register an event that
-times out after an hour and youreset your system clock to last years
+times out after an hour and you reset your system clock to last years
 time, it will still time out after (roughly) and hour. "Roughly" because
 detecting time jumps is hard, and soem inaccuracies are unavoidable (the
 monotonic clock option helps a lot here).
 The relative timeouts are calculated relative to the C<ev_now ()>
 time. This is usually the right thing as this timestamp refers to the time
 of the event triggering whatever timeout you are modifying/starting.  If
 you suspect event processing to be delayed and you *need* to base the timeout
-ion the current time, use something like this to adjust for this:
+on the current time, use something like this to adjust for this:
    ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);
 =over 4
 later, again, and again, until stopped manually.
 The timer itself will do a best-effort at avoiding drift, that is, if you
 configure a timer to trigger every 10 seconds, then it will trigger at
 exactly 10 second intervals. If, however, your program cannot keep up with
-the timer (ecause it takes longer than those 10 seconds to do stuff) the
+the timer (because it takes longer than those 10 seconds to do stuff) the
 timer will not fire more than once per event loop iteration.
 =item ev_timer_again (loop)
 This will act as if the timer timed out and restart it again if it is
 state where you do not expect data to travel on the socket, you can stop
 the timer, and again will automatically restart it if need be.
 =back
-=head2 C<ev_periodic> - to cron or not to cron it
+=head2 C<ev_periodic> - to cron or not to cron
 Periodic watchers are also timers of a kind, but they are very versatile
 (and unfortunately a bit complex).
 Unlike C<ev_timer>'s, they are not based on real time (or relative time)
 In this mode the values for C<interval> and C<at> are both being
 ignored. Instead, each time the periodic watcher gets scheduled, the
 reschedule callback will be called with the watcher as first, and the
 current time as second argument.
-NOTE: I<This callback MUST NOT stop or destroy the periodic or any other
+NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,
-periodic watcher, ever, or make any event loop modifications>. If you need
+ever, or make any event loop modifications>. If you need to stop it,
-to stop it, return C<now + 1e30> (or so, fudge fudge) and stop it afterwards.
+return C<now + 1e30> (or so, fudge fudge) and stop it afterwards (e.g. by
+starting a prepare watcher).
-Also, I<<this callback must always return a time that is later than the
-passed C<now> value >>. Not even C<now> itself will be ok.
-Its prototype is c<ev_tstamp (*reschedule_cb)(struct ev_periodic *w,
+Its prototype is C<ev_tstamp (*reschedule_cb)(struct ev_periodic *w,
 ev_tstamp now)>, e.g.:
    static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)
    {
      return now + 60.;
 It must return the next time to trigger, based on the passed time value
 (that is, the lowest time value larger than to the second argument). It
 will usually be called just before the callback will be triggered, but
 might be called at other times, too.
+NOTE: I<< This callback must always return a time that is later than the
+passed C<now> value >>. Not even C<now> itself will do, it I<must> be larger.
 This can be used to create very complex timers, such as a timer that
 triggers on each midnight, local time. To do this, you would calculate the
-next midnight after C<now> and return the timestamp value for this. How you do this
+next midnight after C<now> and return the timestamp value for this. How
-is, again, up to you (but it is not trivial).
+you do this is, again, up to you (but it is not trivial, which is the main
+reason I omitted it as an example).
 =back
 =item ev_periodic_again (loop, ev_periodic *)
 Signal watchers will trigger an event when the process receives a specific
 signal one or more times. Even though signals are very asynchronous, libev
 will try it's best to deliver signals synchronously, i.e. as part of the
 normal event processing, like any other event.
-You cna configure as many watchers as you like per signal. Only when the
+You can configure as many watchers as you like per signal. Only when the
 first watcher gets started will libev actually register a signal watcher
 with the kernel (thus it coexists with your own signal handlers as long
 as you don't register any with libev). Similarly, when the last signal
 watcher for a signal is stopped libev will reset the signal handler to
 SIG_DFL (regardless of what it was set to before).
 =item ev_child_set (ev_child *, int pid)
 Configures the watcher to wait for status changes of process C<pid> (or
 I<any> process if C<pid> is specified as C<0>). The callback can look
 at the C<rstatus> member of the C<ev_child> watcher structure to see
-the status word (use the macros from C<sys/wait.h>). The C<rpid> member
+the status word (use the macros from C<sys/wait.h> and see your systems
-contains the pid of the process causing the status change.
+C<waitpid> documentation). The C<rpid> member contains the pid of the
+process causing the status change.
 =back
 =head2 C<ev_idle> - when you've got nothing better to do
-Idle watchers trigger events when there are no other I/O or timer (or
+Idle watchers trigger events when there are no other events are pending
-periodic) events pending. That is, as long as your process is busy
+(prepare, check and other idle watchers do not count). That is, as long
-handling sockets or timeouts it will not be called. But when your process
+as your process is busy handling sockets or timeouts (or even signals,
-is idle all idle watchers are being called again and again - until
+imagine) it will not be triggered. But when your process is idle all idle
+watchers are being called again and again, once per event loop iteration -
-stopped, that is, or your process receives more events.
+until stopped, that is, or your process receives more events and becomes
+busy.
 The most noteworthy effect is that as long as any idle watchers are
 active, the process will not block when waiting for new events.
 Apart from keeping your process non-blocking (which is a useful
 kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,
 believe me.
 =back
-=head2 prepare and check - your hooks into the event loop
+=head2 C<ev_prepare> and C<ev_check> - customise your event loop
-Prepare and check watchers usually (but not always) are used in
+Prepare and check watchers are usually (but not always) used in tandem:
-tandom. Prepare watchers get invoked before the process blocks and check
+prepare watchers get invoked before the process blocks and check watchers
-watchers afterwards.
+afterwards.
 Their main purpose is to integrate other event mechanisms into libev. This
 could be used, for example, to track variable changes, implement your own
 watchers, integrate net-snmp or a coroutine library and lots more.
 This is done by examining in each prepare call which file descriptors need
-to be watched by the other library, registering C<ev_io> watchers for them
+to be watched by the other library, registering C<ev_io> watchers for
-and starting an C<ev_timer> watcher for any timeouts (many libraries provide
+them and starting an C<ev_timer> watcher for any timeouts (many libraries
-just this functionality). Then, in the check watcher you check for any
+provide just this functionality). Then, in the check watcher you check for
-events that occured (by making your callbacks set soem flags for example)
+any events that occured (by checking the pending status of all watchers
-and call back into the library.
+and stopping them) and call back into the library. The I/O and timer
+callbacks will never actually be called (but must be valid nevertheless,
+because you never know, you know?).
-As another example, the perl Coro module uses these hooks to integrate
+As another example, the Perl Coro module uses these hooks to integrate
 coroutines into libev programs, by yielding to other active coroutines
 during each prepare and only letting the process block if no coroutines
-are ready to run.
+are ready to run (it's actually more complicated: it only runs coroutines
+with priority higher than or equal to the event loop and one coroutine
+of lower priority, but only once, using idle watchers to keep the event
+loop from blocking if lower-priority coroutines are active, thus mapping
+low-priority coroutines to idle/background tasks).
 =over 4
 =item ev_prepare_init (ev_prepare *, callback)
 =item ev_check_init (ev_check *, callback)
 Initialises and configures the prepare or check watcher - they have no
 parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>
-macros, but using them is utterly, utterly pointless.
+macros, but using them is utterly, utterly and completely pointless.
 =back
 =head1 OTHER FUNCTIONS
-There are some other fucntions of possible interest. Described. Here. Now.
+There are some other functions of possible interest. Described. Here. Now.
 =over 4
 =item ev_once (loop, int fd, int events, ev_tstamp timeout, callback)
 This function combines a simple timer and an I/O watcher, calls your
 callback on whichever event happens first and automatically stop both
 watchers. This is useful if you want to wait for a single event on an fd
-or timeout without havign to allocate/configure/start/stop/free one or
+or timeout without having to allocate/configure/start/stop/free one or
 more watchers yourself.
-If C<fd> is less than 0, then no I/O watcher will be started and events is
+If C<fd> is less than 0, then no I/O watcher will be started and events
-ignored. Otherwise, an C<ev_io> watcher for the given C<fd> and C<events> set
+is being ignored. Otherwise, an C<ev_io> watcher for the given C<fd> and
-will be craeted and started.
+C<events> set will be craeted and started.
 If C<timeout> is less than 0, then no timeout watcher will be
-started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and repeat
+started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
-= 0) will be started.
+repeat = 0) will be started. While C<0> is a valid timeout, it is of
+dubious value.
-The callback has the type C<void (*cb)(int revents, void *arg)> and
+The callback has the type C<void (*cb)(int revents, void *arg)> and gets
-gets passed an events set (normally a combination of C<EV_ERROR>, C<EV_READ>,
+passed an C<revents> set like normal event callbacks (a combination of
-C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg> value passed to C<ev_once>:
+C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>
+value passed to C<ev_once>:
   static void stdin_ready (int revents, void *arg)
   {
     if (revents & EV_TIMEOUT)
-      /* doh, nothing entered */
+      /* doh, nothing entered */;
     else if (revents & EV_READ)
-      /* stdin might have data for us, joy! */
+      /* stdin might have data for us, joy! */;
   }
-  ev_once (STDIN_FILENO, EV_READm 10., stdin_ready, 0);
+  ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
 =item ev_feed_event (loop, watcher, int events)
 Feeds the given event set into the event loop, as if the specified event
-has happened for the specified watcher (which must be a pointer to an
+had happened for the specified watcher (which must be a pointer to an
-initialised but not necessarily active event watcher).
+initialised but not necessarily started event watcher).
 =item ev_feed_fd_event (loop, int fd, int revents)
-Feed an event on the given fd, as if a file descriptor backend detected it.
+Feed an event on the given fd, as if a file descriptor backend detected
+the given events it.
 =item ev_feed_signal_event (loop, int signum)
 Feed an event as if the given signal occured (loop must be the default loop!).
 =back
+=head1 LIBEVENT EMULATION
+Libev offers a compatibility emulation layer for libevent. It cannot
+emulate the internals of libevent, so here are some usage hints:
+=over 4
+=item * Use it by including <event.h>, as usual.
+=item * The following members are fully supported: ev_base, ev_callback,
+ev_arg, ev_fd, ev_res, ev_events.
+=item * Avoid using ev_flags and the EVLIST_*-macros, while it is
+maintained by libev, it does not work exactly the same way as in libevent (consider
+it a private API).
+=item * Priorities are not currently supported. Initialising priorities
+will fail and all watchers will have the same priority, even though there
+is an ev_pri field.
+=item * Other members are not supported.
+=item * The libev emulation is I<not> ABI compatible to libevent, you need
+to use the libev header file and library.
+=back
+=head1 C++ SUPPORT
+TBD.
 =head1 AUTHOR
 Marc Lehmann <libev@schmorp.de>.

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing libev/ev.pod (file contents): Revision 1.12 by root, Mon Nov 12 08:35:18 2007 UTC vs. Revision 1.27 by root, Wed Nov 14 05:02:07 2007 UTC

Diff Legend

Comparing libev/ev.pod (file contents):
Revision 1.12 by root, Mon Nov 12 08:35:18 2007 UTC vs.
Revision 1.27 by root, Wed Nov 14 05:02:07 2007 UTC