[ViewVC] Diff of: cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.310 by root, Thu Oct 21 12:32:47 2010 UTC vs.
Revision 1.350 by sf-exg, Mon Jan 10 08:36:41 2011 UTC

…		…
43		43
44	int	44	int
45	main (void)	45	main (void)
46	{	46	{
47	// use the default event loop unless you have special needs	47	// use the default event loop unless you have special needs
48	struct ev_loop *loop = ev_default_loop (0);	48	struct ev_loop *loop = EV_DEFAULT;
49		49
50	// initialise an io watcher, then start it	50	// initialise an io watcher, then start it
51	// this one will watch for stdin to become readable	51	// this one will watch for stdin to become readable
52	ev_io_init (&stdin_watcher, stdin_cb, /STDIN_FILENO/ 0, EV_READ);	52	ev_io_init (&stdin_watcher, stdin_cb, /STDIN_FILENO/ 0, EV_READ);
53	ev_io_start (loop, &stdin_watcher);	53	ev_io_start (loop, &stdin_watcher);
…		…
77	on event-based programming, nor will it introduce event-based programming	77	on event-based programming, nor will it introduce event-based programming
78	with libev.	78	with libev.
79		79
80	Familiarity with event based programming techniques in general is assumed	80	Familiarity with event based programming techniques in general is assumed
81	throughout this document.	81	throughout this document.
		82
		83	=head1 WHAT TO READ WHEN IN A HURRY
		84
		85	This manual tries to be very detailed, but unfortunately, this also makes
		86	it very long. If you just want to know the basics of libev, I suggest
		87	reading L<ANATOMY OF A WATCHER>, then the L<EXAMPLE PROGRAM> above and
		88	look up the missing functions in L<GLOBAL FUNCTIONS> and the C<ev_io> and
		89	C<ev_timer> sections in L<WATCHER TYPES>.
82		90
83	=head1 ABOUT LIBEV	91	=head1 ABOUT LIBEV
84		92
85	Libev is an event loop: you register interest in certain events (such as a	93	Libev is an event loop: you register interest in certain events (such as a
86	file descriptor being readable or a timeout occurring), and it will manage	94	file descriptor being readable or a timeout occurring), and it will manage
…		…
124	this argument.	132	this argument.
125		133
126	=head2 TIME REPRESENTATION	134	=head2 TIME REPRESENTATION
127		135
128	Libev represents time as a single floating point number, representing	136	Libev represents time as a single floating point number, representing
129	the (fractional) number of seconds since the (POSIX) epoch (in practise	137	the (fractional) number of seconds since the (POSIX) epoch (in practice
130	somewhere near the beginning of 1970, details are complicated, don't	138	somewhere near the beginning of 1970, details are complicated, don't
131	ask). This type is called C<ev_tstamp>, which is what you should use	139	ask). This type is called C<ev_tstamp>, which is what you should use
132	too. It usually aliases to the C<double> type in C. When you need to do	140	too. It usually aliases to the C<double> type in C. When you need to do
133	any calculations on it, you should treat it as some floating point value.	141	any calculations on it, you should treat it as some floating point value.
134		142
…		…
165		173
166	=item ev_tstamp ev_time ()	174	=item ev_tstamp ev_time ()
167		175
168	Returns the current time as libev would use it. Please note that the	176	Returns the current time as libev would use it. Please note that the
169	C<ev_now> function is usually faster and also often returns the timestamp	177	C<ev_now> function is usually faster and also often returns the timestamp
170	you actually want to know.	178	you actually want to know. Also interesting is the combination of
		179	C<ev_update_now> and C<ev_now>.
171		180
172	=item ev_sleep (ev_tstamp interval)	181	=item ev_sleep (ev_tstamp interval)
173		182
174	Sleep for the given interval: The current thread will be blocked until	183	Sleep for the given interval: The current thread will be blocked until
175	either it is interrupted or the given time interval has passed. Basically	184	either it is interrupted or the given time interval has passed. Basically
…		…
192	as this indicates an incompatible change. Minor versions are usually	201	as this indicates an incompatible change. Minor versions are usually
193	compatible to older versions, so a larger minor version alone is usually	202	compatible to older versions, so a larger minor version alone is usually
194	not a problem.	203	not a problem.
195		204
196	Example: Make sure we haven't accidentally been linked against the wrong	205	Example: Make sure we haven't accidentally been linked against the wrong
197	version (note, however, that this will not detect ABI mismatches :).	206	version (note, however, that this will not detect other ABI mismatches,
		207	such as LFS or reentrancy).
198		208
199	assert (("libev version mismatch",	209	assert (("libev version mismatch",
200	ev_version_major () == EV_VERSION_MAJOR	210	ev_version_major () == EV_VERSION_MAJOR
201	&& ev_version_minor () >= EV_VERSION_MINOR));	211	&& ev_version_minor () >= EV_VERSION_MINOR));
202		212
…		…
213	assert (("sorry, no epoll, no sex",	223	assert (("sorry, no epoll, no sex",
214	ev_supported_backends () & EVBACKEND_EPOLL));	224	ev_supported_backends () & EVBACKEND_EPOLL));
215		225
216	=item unsigned int ev_recommended_backends ()	226	=item unsigned int ev_recommended_backends ()
217		227
218	Return the set of all backends compiled into this binary of libev and also	228	Return the set of all backends compiled into this binary of libev and
219	recommended for this platform. This set is often smaller than the one	229	also recommended for this platform, meaning it will work for most file
		230	descriptor types. This set is often smaller than the one returned by
220	returned by C<ev_supported_backends>, as for example kqueue is broken on	231	C<ev_supported_backends>, as for example kqueue is broken on most BSDs
221	most BSDs and will not be auto-detected unless you explicitly request it	232	and will not be auto-detected unless you explicitly request it (assuming
222	(assuming you know what you are doing). This is the set of backends that	233	you know what you are doing). This is the set of backends that libev will
223	libev will probe for if you specify no backends explicitly.	234	probe for if you specify no backends explicitly.
224		235
225	=item unsigned int ev_embeddable_backends ()	236	=item unsigned int ev_embeddable_backends ()
226		237
227	Returns the set of backends that are embeddable in other event loops. This	238	Returns the set of backends that are embeddable in other event loops. This
228	is the theoretical, all-platform, value. To find which backends	239	value is platform-specific but can include backends not available on the
229	might be supported on the current system, you would need to look at	240	current system. To find which embeddable backends might be supported on
230	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for	241	the current system, you would need to look at C<ev_embeddable_backends ()
231	recommended ones.	242	& ev_supported_backends ()>, likewise for recommended ones.
232		243
233	See the description of C<ev_embed> watchers for more info.	244	See the description of C<ev_embed> watchers for more info.
234		245
235	=item ev_set_allocator (void (cb)(void *ptr, long size)) [NOT REENTRANT]	246	=item ev_set_allocator (void (cb)(void *ptr, long size))
236		247
237	Sets the allocation function to use (the prototype is similar - the	248	Sets the allocation function to use (the prototype is similar - the
238	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is	249	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
239	used to allocate and free memory (no surprises here). If it returns zero	250	used to allocate and free memory (no surprises here). If it returns zero
240	when memory needs to be allocated (C<size != 0>), the library might abort	251	when memory needs to be allocated (C<size != 0>), the library might abort
…		…
266	}	277	}
267		278
268	...	279	...
269	ev_set_allocator (persistent_realloc);	280	ev_set_allocator (persistent_realloc);
270		281
271	=item ev_set_syserr_cb (void (cb)(const char msg)); [NOT REENTRANT]	282	=item ev_set_syserr_cb (void (cb)(const char msg))
272		283
273	Set the callback function to call on a retryable system call error (such	284	Set the callback function to call on a retryable system call error (such
274	as failed select, poll, epoll_wait). The message is a printable string	285	as failed select, poll, epoll_wait). The message is a printable string
275	indicating the system call or subsystem causing the problem. If this	286	indicating the system call or subsystem causing the problem. If this
276	callback is set, then libev will expect it to remedy the situation, no	287	callback is set, then libev will expect it to remedy the situation, no
…		…
288	}	299	}
289		300
290	...	301	...
291	ev_set_syserr_cb (fatal_error);	302	ev_set_syserr_cb (fatal_error);
292		303
		304	=item ev_feed_signal (int signum)
		305
		306	This function can be used to "simulate" a signal receive. It is completely
		307	safe to call this function at any time, from any context, including signal
		308	handlers or random threads.
		309
		310	Its main use is to customise signal handling in your process, especially
		311	in the presence of threads. For example, you could block signals
		312	by default in all threads (and specifying C<EVFLAG_NOSIGMASK> when
		313	creating any loops), and in one thread, use C<sigwait> or any other
		314	mechanism to wait for signals, then "deliver" them to libev by calling
		315	C<ev_feed_signal>.
		316
293	=back	317	=back
294		318
295	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	319	=head1 FUNCTIONS CONTROLLING EVENT LOOPS
296		320
297	An event loop is described by a C<struct ev_loop *> (the C<struct> is	321	An event loop is described by a C<struct ev_loop *> (the C<struct> is
298	I<not> optional in case unless libev 3 compatibility is disabled, as libev	322	I<not> optional in this case unless libev 3 compatibility is disabled, as
299	3 had an C<ev_loop> function colliding with the struct name).	323	libev 3 had an C<ev_loop> function colliding with the struct name).
300		324
301	The library knows two types of such loops, the I<default> loop, which	325	The library knows two types of such loops, the I<default> loop, which
302	supports signals and child events, and dynamically created event loops	326	supports child process events, and dynamically created event loops which
303	which do not.	327	do not.
304		328
305	=over 4	329	=over 4
306		330
307	=item struct ev_loop *ev_default_loop (unsigned int flags)	331	=item struct ev_loop *ev_default_loop (unsigned int flags)
308		332
309	This will initialise the default event loop if it hasn't been initialised	333	This returns the "default" event loop object, which is what you should
310	yet and return it. If the default loop could not be initialised, returns	334	normally use when you just need "the event loop". Event loop objects and
311	false. If it already was initialised it simply returns it (and ignores the	335	the C<flags> parameter are described in more detail in the entry for
312	flags. If that is troubling you, check C<ev_backend ()> afterwards).	336	C<ev_loop_new>.
		337
		338	If the default loop is already initialised then this function simply
		339	returns it (and ignores the flags. If that is troubling you, check
		340	C<ev_backend ()> afterwards). Otherwise it will create it with the given
		341	flags, which should almost always be C<0>, unless the caller is also the
		342	one calling C<ev_run> or otherwise qualifies as "the main program".
313		343
314	If you don't know what event loop to use, use the one returned from this	344	If you don't know what event loop to use, use the one returned from this
315	function.	345	function (or via the C<EV_DEFAULT> macro).
316		346
317	Note that this function is I<not> thread-safe, so if you want to use it	347	Note that this function is I<not> thread-safe, so if you want to use it
318	from multiple threads, you have to lock (note also that this is unlikely,	348	from multiple threads, you have to employ some kind of mutex (note also
319	as loops cannot be shared easily between threads anyway).	349	that this case is unlikely, as loops cannot be shared easily between
		350	threads anyway).
320		351
321	The default loop is the only loop that can handle C<ev_signal> and	352	The default loop is the only loop that can handle C<ev_child> watchers,
322	C<ev_child> watchers, and to do this, it always registers a handler	353	and to do this, it always registers a handler for C<SIGCHLD>. If this is
323	for C<SIGCHLD>. If this is a problem for your application you can either	354	a problem for your application you can either create a dynamic loop with
324	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you	355	C<ev_loop_new> which doesn't do that, or you can simply overwrite the
325	can simply overwrite the C<SIGCHLD> signal handler I<after> calling	356	C<SIGCHLD> signal handler I<after> calling C<ev_default_init>.
326	C<ev_default_init>.	357
		358	Example: This is the most typical usage.
		359
		360	if (!ev_default_loop (0))
		361	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		362
		363	Example: Restrict libev to the select and poll backends, and do not allow
		364	environment settings to be taken into account:
		365
		366	ev_default_loop (EVBACKEND_POLL \| EVBACKEND_SELECT \| EVFLAG_NOENV);
		367
		368	=item struct ev_loop *ev_loop_new (unsigned int flags)
		369
		370	This will create and initialise a new event loop object. If the loop
		371	could not be initialised, returns false.
		372
		373	This function is thread-safe, and one common way to use libev with
		374	threads is indeed to create one loop per thread, and using the default
		375	loop in the "main" or "initial" thread.
327		376
328	The flags argument can be used to specify special behaviour or specific	377	The flags argument can be used to specify special behaviour or specific
329	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	378	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
330		379
331	The following flags are supported:	380	The following flags are supported:
…		…
366	environment variable.	415	environment variable.
367		416
368	=item C<EVFLAG_NOINOTIFY>	417	=item C<EVFLAG_NOINOTIFY>
369		418
370	When this flag is specified, then libev will not attempt to use the	419	When this flag is specified, then libev will not attempt to use the
371	I<inotify> API for it's C<ev_stat> watchers. Apart from debugging and	420	I<inotify> API for its C<ev_stat> watchers. Apart from debugging and
372	testing, this flag can be useful to conserve inotify file descriptors, as	421	testing, this flag can be useful to conserve inotify file descriptors, as
373	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.	422	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.
374		423
375	=item C<EVFLAG_SIGNALFD>	424	=item C<EVFLAG_SIGNALFD>
376		425
377	When this flag is specified, then libev will attempt to use the	426	When this flag is specified, then libev will attempt to use the
378	I<signalfd> API for it's C<ev_signal> (and C<ev_child>) watchers. This API	427	I<signalfd> API for its C<ev_signal> (and C<ev_child>) watchers. This API
379	delivers signals synchronously, which makes it both faster and might make	428	delivers signals synchronously, which makes it both faster and might make
380	it possible to get the queued signal data. It can also simplify signal	429	it possible to get the queued signal data. It can also simplify signal
381	handling with threads, as long as you properly block signals in your	430	handling with threads, as long as you properly block signals in your
382	threads that are not interested in handling them.	431	threads that are not interested in handling them.
383		432
384	Signalfd will not be used by default as this changes your signal mask, and	433	Signalfd will not be used by default as this changes your signal mask, and
385	there are a lot of shoddy libraries and programs (glib's threadpool for	434	there are a lot of shoddy libraries and programs (glib's threadpool for
386	example) that can't properly initialise their signal masks.	435	example) that can't properly initialise their signal masks.
		436
		437	=item C<EVFLAG_NOSIGMASK>
		438
		439	When this flag is specified, then libev will avoid to modify the signal
		440	mask. Specifically, this means you ahve to make sure signals are unblocked
		441	when you want to receive them.
		442
		443	This behaviour is useful when you want to do your own signal handling, or
		444	want to handle signals only in specific threads and want to avoid libev
		445	unblocking the signals.
		446
		447	This flag's behaviour will become the default in future versions of libev.
387		448
388	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	449	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
389		450
390	This is your standard select(2) backend. Not I<completely> standard, as	451	This is your standard select(2) backend. Not I<completely> standard, as
391	libev tries to roll its own fd_set with no limits on the number of fds,	452	libev tries to roll its own fd_set with no limits on the number of fds,
…		…
427	epoll scales either O(1) or O(active_fds).	488	epoll scales either O(1) or O(active_fds).
428		489
429	The epoll mechanism deserves honorable mention as the most misdesigned	490	The epoll mechanism deserves honorable mention as the most misdesigned
430	of the more advanced event mechanisms: mere annoyances include silently	491	of the more advanced event mechanisms: mere annoyances include silently
431	dropping file descriptors, requiring a system call per change per file	492	dropping file descriptors, requiring a system call per change per file
432	descriptor (and unnecessary guessing of parameters), problems with dup and	493	descriptor (and unnecessary guessing of parameters), problems with dup,
		494	returning before the timeout value, resulting in additional iterations
		495	(and only giving 5ms accuracy while select on the same platform gives
433	so on. The biggest issue is fork races, however - if a program forks then	496	0.1ms) and so on. The biggest issue is fork races, however - if a program
434	I<both> parent and child process have to recreate the epoll set, which can	497	forks then I<both> parent and child process have to recreate the epoll
435	take considerable time (one syscall per file descriptor) and is of course	498	set, which can take considerable time (one syscall per file descriptor)
436	hard to detect.	499	and is of course hard to detect.
437		500
438	Epoll is also notoriously buggy - embedding epoll fds I<should> work, but	501	Epoll is also notoriously buggy - embedding epoll fds I<should> work, but
439	of course I<doesn't>, and epoll just loves to report events for totally	502	of course I<doesn't>, and epoll just loves to report events for totally
440	I<different> file descriptors (even already closed ones, so one cannot	503	I<different> file descriptors (even already closed ones, so one cannot
441	even remove them from the set) than registered in the set (especially	504	even remove them from the set) than registered in the set (especially
…		…
443	employing an additional generation counter and comparing that against the	506	employing an additional generation counter and comparing that against the
444	events to filter out spurious ones, recreating the set when required. Last	507	events to filter out spurious ones, recreating the set when required. Last
445	not least, it also refuses to work with some file descriptors which work	508	not least, it also refuses to work with some file descriptors which work
446	perfectly fine with C<select> (files, many character devices...).	509	perfectly fine with C<select> (files, many character devices...).
447		510
		511	Epoll is truly the train wreck analog among event poll mechanisms.
		512
448	While stopping, setting and starting an I/O watcher in the same iteration	513	While stopping, setting and starting an I/O watcher in the same iteration
449	will result in some caching, there is still a system call per such	514	will result in some caching, there is still a system call per such
450	incident (because the same I<file descriptor> could point to a different	515	incident (because the same I<file descriptor> could point to a different
451	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed	516	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed
452	file descriptors might not work very well if you register events for both	517	file descriptors might not work very well if you register events for both
…		…
540		605
541	Try all backends (even potentially broken ones that wouldn't be tried	606	Try all backends (even potentially broken ones that wouldn't be tried
542	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	607	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
543	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	608	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
544		609
545	It is definitely not recommended to use this flag.	610	It is definitely not recommended to use this flag, use whatever
		611	C<ev_recommended_backends ()> returns, or simply do not specify a backend
		612	at all.
		613
		614	=item C<EVBACKEND_MASK>
		615
		616	Not a backend at all, but a mask to select all backend bits from a
		617	C<flags> value, in case you want to mask out any backends from a flags
		618	value (e.g. when modifying the C<LIBEV_FLAGS> environment variable).
546		619
547	=back	620	=back
548		621
549	If one or more of the backend flags are or'ed into the flags value,	622	If one or more of the backend flags are or'ed into the flags value,
550	then only these backends will be tried (in the reverse order as listed	623	then only these backends will be tried (in the reverse order as listed
551	here). If none are specified, all backends in C<ev_recommended_backends	624	here). If none are specified, all backends in C<ev_recommended_backends
552	()> will be tried.	625	()> will be tried.
553		626
554	Example: This is the most typical usage.
555
556	if (!ev_default_loop (0))
557	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
558
559	Example: Restrict libev to the select and poll backends, and do not allow
560	environment settings to be taken into account:
561
562	ev_default_loop (EVBACKEND_POLL \| EVBACKEND_SELECT \| EVFLAG_NOENV);
563
564	Example: Use whatever libev has to offer, but make sure that kqueue is
565	used if available (warning, breaks stuff, best use only with your own
566	private event loop and only if you know the OS supports your types of
567	fds):
568
569	ev_default_loop (ev_recommended_backends () \| EVBACKEND_KQUEUE);
570
571	=item struct ev_loop *ev_loop_new (unsigned int flags)
572
573	Similar to C<ev_default_loop>, but always creates a new event loop that is
574	always distinct from the default loop.
575
576	Note that this function I<is> thread-safe, and one common way to use
577	libev with threads is indeed to create one loop per thread, and using the
578	default loop in the "main" or "initial" thread.
579
580	Example: Try to create a event loop that uses epoll and nothing else.	627	Example: Try to create a event loop that uses epoll and nothing else.
581		628
582	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL \| EVFLAG_NOENV);	629	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL \| EVFLAG_NOENV);
583	if (!epoller)	630	if (!epoller)
584	fatal ("no epoll found here, maybe it hides under your chair");	631	fatal ("no epoll found here, maybe it hides under your chair");
585		632
		633	Example: Use whatever libev has to offer, but make sure that kqueue is
		634	used if available.
		635
		636	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () \| EVBACKEND_KQUEUE);
		637
586	=item ev_default_destroy ()	638	=item ev_loop_destroy (loop)
587		639
588	Destroys the default loop (frees all memory and kernel state etc.). None	640	Destroys an event loop object (frees all memory and kernel state
589	of the active event watchers will be stopped in the normal sense, so	641	etc.). None of the active event watchers will be stopped in the normal
590	e.g. C<ev_is_active> might still return true. It is your responsibility to	642	sense, so e.g. C<ev_is_active> might still return true. It is your
591	either stop all watchers cleanly yourself I<before> calling this function,	643	responsibility to either stop all watchers cleanly yourself I<before>
592	or cope with the fact afterwards (which is usually the easiest thing, you	644	calling this function, or cope with the fact afterwards (which is usually
593	can just ignore the watchers and/or C<free ()> them for example).	645	the easiest thing, you can just ignore the watchers and/or C<free ()> them
		646	for example).
594		647
595	Note that certain global state, such as signal state (and installed signal	648	Note that certain global state, such as signal state (and installed signal
596	handlers), will not be freed by this function, and related watchers (such	649	handlers), will not be freed by this function, and related watchers (such
597	as signal and child watchers) would need to be stopped manually.	650	as signal and child watchers) would need to be stopped manually.
598		651
599	In general it is not advisable to call this function except in the	652	This function is normally used on loop objects allocated by
600	rare occasion where you really need to free e.g. the signal handling	653	C<ev_loop_new>, but it can also be used on the default loop returned by
		654	C<ev_default_loop>, in which case it is not thread-safe.
		655
		656	Note that it is not advisable to call this function on the default loop
		657	except in the rare occasion where you really need to free its resources.
601	pipe fds. If you need dynamically allocated loops it is better to use	658	If you need dynamically allocated loops it is better to use C<ev_loop_new>
602	C<ev_loop_new> and C<ev_loop_destroy>.	659	and C<ev_loop_destroy>.
603		660
604	=item ev_loop_destroy (loop)	661	=item ev_loop_fork (loop)
605		662
606	Like C<ev_default_destroy>, but destroys an event loop created by an
607	earlier call to C<ev_loop_new>.
608
609	=item ev_default_fork ()
610
611	This function sets a flag that causes subsequent C<ev_run> iterations	663	This function sets a flag that causes subsequent C<ev_run> iterations to
612	to reinitialise the kernel state for backends that have one. Despite the	664	reinitialise the kernel state for backends that have one. Despite the
613	name, you can call it anytime, but it makes most sense after forking, in	665	name, you can call it anytime, but it makes most sense after forking, in
614	the child process (or both child and parent, but that again makes little	666	the child process. You I<must> call it (or use C<EVFLAG_FORKCHECK>) in the
615	sense). You I<must> call it in the child before using any of the libev	667	child before resuming or calling C<ev_run>.
616	functions, and it will only take effect at the next C<ev_run> iteration.
617		668
618	Again, you I<have> to call it on I<any> loop that you want to re-use after	669	Again, you I<have> to call it on I<any> loop that you want to re-use after
619	a fork, I<even if you do not plan to use the loop in the parent>. This is	670	a fork, I<even if you do not plan to use the loop in the parent>. This is
620	because some kernel interfaces cough I<kqueue> cough do funny things	671	because some kernel interfaces cough I<kqueue> cough do funny things
621	during fork.	672	during fork.
…		…
626	call it at all (in fact, C<epoll> is so badly broken that it makes a	677	call it at all (in fact, C<epoll> is so badly broken that it makes a
627	difference, but libev will usually detect this case on its own and do a	678	difference, but libev will usually detect this case on its own and do a
628	costly reset of the backend).	679	costly reset of the backend).
629		680
630	The function itself is quite fast and it's usually not a problem to call	681	The function itself is quite fast and it's usually not a problem to call
631	it just in case after a fork. To make this easy, the function will fit in	682	it just in case after a fork.
632	quite nicely into a call to C<pthread_atfork>:
633		683
		684	Example: Automate calling C<ev_loop_fork> on the default loop when
		685	using pthreads.
		686
		687	static void
		688	post_fork_child (void)
		689	{
		690	ev_loop_fork (EV_DEFAULT);
		691	}
		692
		693	...
634	pthread_atfork (0, 0, ev_default_fork);	694	pthread_atfork (0, 0, post_fork_child);
635
636	=item ev_loop_fork (loop)
637
638	Like C<ev_default_fork>, but acts on an event loop created by
639	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
640	after fork that you want to re-use in the child, and how you keep track of
641	them is entirely your own problem.
642		695
643	=item int ev_is_default_loop (loop)	696	=item int ev_is_default_loop (loop)
644		697
645	Returns true when the given loop is, in fact, the default loop, and false	698	Returns true when the given loop is, in fact, the default loop, and false
646	otherwise.	699	otherwise.
…		…
657	prepare and check phases.	710	prepare and check phases.
658		711
659	=item unsigned int ev_depth (loop)	712	=item unsigned int ev_depth (loop)
660		713
661	Returns the number of times C<ev_run> was entered minus the number of	714	Returns the number of times C<ev_run> was entered minus the number of
662	times C<ev_run> was exited, in other words, the recursion depth.	715	times C<ev_run> was exited normally, in other words, the recursion depth.
663		716
664	Outside C<ev_run>, this number is zero. In a callback, this number is	717	Outside C<ev_run>, this number is zero. In a callback, this number is
665	C<1>, unless C<ev_run> was invoked recursively (or from another thread),	718	C<1>, unless C<ev_run> was invoked recursively (or from another thread),
666	in which case it is higher.	719	in which case it is higher.
667		720
668	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread	721	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread,
669	etc.), doesn't count as "exit" - consider this as a hint to avoid such	722	throwing an exception etc.), doesn't count as "exit" - consider this
670	ungentleman-like behaviour unless it's really convenient.	723	as a hint to avoid such ungentleman-like behaviour unless it's really
		724	convenient, in which case it is fully supported.
671		725
672	=item unsigned int ev_backend (loop)	726	=item unsigned int ev_backend (loop)
673		727
674	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	728	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
675	use.	729	use.
…		…
736	relying on all watchers to be stopped when deciding when a program has	790	relying on all watchers to be stopped when deciding when a program has
737	finished (especially in interactive programs), but having a program	791	finished (especially in interactive programs), but having a program
738	that automatically loops as long as it has to and no longer by virtue	792	that automatically loops as long as it has to and no longer by virtue
739	of relying on its watchers stopping correctly, that is truly a thing of	793	of relying on its watchers stopping correctly, that is truly a thing of
740	beauty.	794	beauty.
		795
		796	This function is also I<mostly> exception-safe - you can break out of
		797	a C<ev_run> call by calling C<longjmp> in a callback, throwing a C++
		798	exception and so on. This does not decrement the C<ev_depth> value, nor
		799	will it clear any outstanding C<EVBREAK_ONE> breaks.
741		800
742	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle	801	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle
743	those events and any already outstanding ones, but will not wait and	802	those events and any already outstanding ones, but will not wait and
744	block your process in case there are no events and will return after one	803	block your process in case there are no events and will return after one
745	iteration of the loop. This is sometimes useful to poll and handle new	804	iteration of the loop. This is sometimes useful to poll and handle new
…		…
807	Can be used to make a call to C<ev_run> return early (but only after it	866	Can be used to make a call to C<ev_run> return early (but only after it
808	has processed all outstanding events). The C<how> argument must be either	867	has processed all outstanding events). The C<how> argument must be either
809	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or	868	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or
810	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.	869	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.
811		870
812	This "unloop state" will be cleared when entering C<ev_run> again.	871	This "break state" will be cleared on the next call to C<ev_run>.
813		872
814	It is safe to call C<ev_break> from outside any C<ev_run> calls. ##TODO##	873	It is safe to call C<ev_break> from outside any C<ev_run> calls, too, in
		874	which case it will have no effect.
815		875
816	=item ev_ref (loop)	876	=item ev_ref (loop)
817		877
818	=item ev_unref (loop)	878	=item ev_unref (loop)
819		879
…		…
840	running when nothing else is active.	900	running when nothing else is active.
841		901
842	ev_signal exitsig;	902	ev_signal exitsig;
843	ev_signal_init (&exitsig, sig_cb, SIGINT);	903	ev_signal_init (&exitsig, sig_cb, SIGINT);
844	ev_signal_start (loop, &exitsig);	904	ev_signal_start (loop, &exitsig);
845	evf_unref (loop);	905	ev_unref (loop);
846		906
847	Example: For some weird reason, unregister the above signal handler again.	907	Example: For some weird reason, unregister the above signal handler again.
848		908
849	ev_ref (loop);	909	ev_ref (loop);
850	ev_signal_stop (loop, &exitsig);	910	ev_signal_stop (loop, &exitsig);
…		…
908		968
909	=item ev_invoke_pending (loop)	969	=item ev_invoke_pending (loop)
910		970
911	This call will simply invoke all pending watchers while resetting their	971	This call will simply invoke all pending watchers while resetting their
912	pending state. Normally, C<ev_run> does this automatically when required,	972	pending state. Normally, C<ev_run> does this automatically when required,
913	but when overriding the invoke callback this call comes handy.	973	but when overriding the invoke callback this call comes handy. This
		974	function can be invoked from a watcher - this can be useful for example
		975	when you want to do some lengthy calculation and want to pass further
		976	event handling to another thread (you still have to make sure only one
		977	thread executes within C<ev_invoke_pending> or C<ev_run> of course).
914		978
915	=item int ev_pending_count (loop)	979	=item int ev_pending_count (loop)
916		980
917	Returns the number of pending watchers - zero indicates that no watchers	981	Returns the number of pending watchers - zero indicates that no watchers
918	are pending.	982	are pending.
…		…
958	See also the locking example in the C<THREADS> section later in this	1022	See also the locking example in the C<THREADS> section later in this
959	document.	1023	document.
960		1024
961	=item ev_set_userdata (loop, void *data)	1025	=item ev_set_userdata (loop, void *data)
962		1026
963	=item ev_userdata (loop)	1027	=item void *ev_userdata (loop)
964		1028
965	Set and retrieve a single C<void *> associated with a loop. When	1029	Set and retrieve a single C<void *> associated with a loop. When
966	C<ev_set_userdata> has never been called, then C<ev_userdata> returns	1030	C<ev_set_userdata> has never been called, then C<ev_userdata> returns
967	C<0.>	1031	C<0>.
968		1032
969	These two functions can be used to associate arbitrary data with a loop,	1033	These two functions can be used to associate arbitrary data with a loop,
970	and are intended solely for the C<invoke_pending_cb>, C<release> and	1034	and are intended solely for the C<invoke_pending_cb>, C<release> and
971	C<acquire> callbacks described above, but of course can be (ab-)used for	1035	C<acquire> callbacks described above, but of course can be (ab-)used for
972	any other purpose as well.	1036	any other purpose as well.
…		…
990		1054
991	In the following description, uppercase C<TYPE> in names stands for the	1055	In the following description, uppercase C<TYPE> in names stands for the
992	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer	1056	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer
993	watchers and C<ev_io_start> for I/O watchers.	1057	watchers and C<ev_io_start> for I/O watchers.
994		1058
995	A watcher is a structure that you create and register to record your	1059	A watcher is an opaque structure that you allocate and register to record
996	interest in some event. For instance, if you want to wait for STDIN to	1060	your interest in some event. To make a concrete example, imagine you want
997	become readable, you would create an C<ev_io> watcher for that:	1061	to wait for STDIN to become readable, you would create an C<ev_io> watcher
		1062	for that:
998		1063
999	static void my_cb (struct ev_loop loop, ev_io w, int revents)	1064	static void my_cb (struct ev_loop loop, ev_io w, int revents)
1000	{	1065	{
1001	ev_io_stop (w);	1066	ev_io_stop (w);
1002	ev_break (loop, EVBREAK_ALL);	1067	ev_break (loop, EVBREAK_ALL);
…		…
1017	stack).	1082	stack).
1018		1083
1019	Each watcher has an associated watcher structure (called C<struct ev_TYPE>	1084	Each watcher has an associated watcher structure (called C<struct ev_TYPE>
1020	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).	1085	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).
1021		1086
1022	Each watcher structure must be initialised by a call to C<ev_init	1087	Each watcher structure must be initialised by a call to C<ev_init (watcher
1023	(watcher *, callback)>, which expects a callback to be provided. This	1088	*, callback)>, which expects a callback to be provided. This callback is
1024	callback gets invoked each time the event occurs (or, in the case of I/O	1089	invoked each time the event occurs (or, in the case of I/O watchers, each
1025	watchers, each time the event loop detects that the file descriptor given	1090	time the event loop detects that the file descriptor given is readable
1026	is readable and/or writable).	1091	and/or writable).
1027		1092
1028	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>	1093	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>
1029	macro to configure it, with arguments specific to the watcher type. There	1094	macro to configure it, with arguments specific to the watcher type. There
1030	is also a macro to combine initialisation and setting in one call: C<<	1095	is also a macro to combine initialisation and setting in one call: C<<
1031	ev_TYPE_init (watcher *, callback, ...) >>.	1096	ev_TYPE_init (watcher *, callback, ...) >>.
…		…
1099	=item C<EV_FORK>	1164	=item C<EV_FORK>
1100		1165
1101	The event loop has been resumed in the child process after fork (see	1166	The event loop has been resumed in the child process after fork (see
1102	C<ev_fork>).	1167	C<ev_fork>).
1103		1168
		1169	=item C<EV_CLEANUP>
		1170
		1171	The event loop is about to be destroyed (see C<ev_cleanup>).
		1172
1104	=item C<EV_ASYNC>	1173	=item C<EV_ASYNC>
1105		1174
1106	The given async watcher has been asynchronously notified (see C<ev_async>).	1175	The given async watcher has been asynchronously notified (see C<ev_async>).
1107		1176
1108	=item C<EV_CUSTOM>	1177	=item C<EV_CUSTOM>
…		…
1279		1348
1280	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related	1349	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
1281	functions that do not need a watcher.	1350	functions that do not need a watcher.
1282		1351
1283	=back	1352	=back
1284
1285		1353
1286	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	1354	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
1287		1355
1288	Each watcher has, by default, a member C<void *data> that you can change	1356	Each watcher has, by default, a member C<void *data> that you can change
1289	and read at any time: libev will completely ignore it. This can be used	1357	and read at any time: libev will completely ignore it. This can be used
…		…
1345	t2_cb (EV_P_ ev_timer *w, int revents)	1413	t2_cb (EV_P_ ev_timer *w, int revents)
1346	{	1414	{
1347	struct my_biggy big = (struct my_biggy *)	1415	struct my_biggy big = (struct my_biggy *)
1348	(((char *)w) - offsetof (struct my_biggy, t2));	1416	(((char *)w) - offsetof (struct my_biggy, t2));
1349	}	1417	}
		1418
		1419	=head2 WATCHER STATES
		1420
		1421	There are various watcher states mentioned throughout this manual -
		1422	active, pending and so on. In this section these states and the rules to
		1423	transition between them will be described in more detail - and while these
		1424	rules might look complicated, they usually do "the right thing".
		1425
		1426	=over 4
		1427
		1428	=item initialiased
		1429
		1430	Before a watcher can be registered with the event looop it has to be
		1431	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
		1432	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
		1433
		1434	In this state it is simply some block of memory that is suitable for use
		1435	in an event loop. It can be moved around, freed, reused etc. at will.
		1436
		1437	=item started/running/active
		1438
		1439	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
		1440	property of the event loop, and is actively waiting for events. While in
		1441	this state it cannot be accessed (except in a few documented ways), moved,
		1442	freed or anything else - the only legal thing is to keep a pointer to it,
		1443	and call libev functions on it that are documented to work on active watchers.
		1444
		1445	=item pending
		1446
		1447	If a watcher is active and libev determines that an event it is interested
		1448	in has occurred (such as a timer expiring), it will become pending. It will
		1449	stay in this pending state until either it is stopped or its callback is
		1450	about to be invoked, so it is not normally pending inside the watcher
		1451	callback.
		1452
		1453	The watcher might or might not be active while it is pending (for example,
		1454	an expired non-repeating timer can be pending but no longer active). If it
		1455	is stopped, it can be freely accessed (e.g. by calling C<ev_TYPE_set>),
		1456	but it is still property of the event loop at this time, so cannot be
		1457	moved, freed or reused. And if it is active the rules described in the
		1458	previous item still apply.
		1459
		1460	It is also possible to feed an event on a watcher that is not active (e.g.
		1461	via C<ev_feed_event>), in which case it becomes pending without being
		1462	active.
		1463
		1464	=item stopped
		1465
		1466	A watcher can be stopped implicitly by libev (in which case it might still
		1467	be pending), or explicitly by calling its C<ev_TYPE_stop> function. The
		1468	latter will clear any pending state the watcher might be in, regardless
		1469	of whether it was active or not, so stopping a watcher explicitly before
		1470	freeing it is often a good idea.
		1471
		1472	While stopped (and not pending) the watcher is essentially in the
		1473	initialised state, that is it can be reused, moved, modified in any way
		1474	you wish.
		1475
		1476	=back
1350		1477
1351	=head2 WATCHER PRIORITY MODELS	1478	=head2 WATCHER PRIORITY MODELS
1352		1479
1353	Many event loops support I<watcher priorities>, which are usually small	1480	Many event loops support I<watcher priorities>, which are usually small
1354	integers that influence the ordering of event callback invocation	1481	integers that influence the ordering of event callback invocation
…		…
2173		2300
2174	=head2 C<ev_signal> - signal me when a signal gets signalled!	2301	=head2 C<ev_signal> - signal me when a signal gets signalled!
2175		2302
2176	Signal watchers will trigger an event when the process receives a specific	2303	Signal watchers will trigger an event when the process receives a specific
2177	signal one or more times. Even though signals are very asynchronous, libev	2304	signal one or more times. Even though signals are very asynchronous, libev
2178	will try it's best to deliver signals synchronously, i.e. as part of the	2305	will try its best to deliver signals synchronously, i.e. as part of the
2179	normal event processing, like any other event.	2306	normal event processing, like any other event.
2180		2307
2181	If you want signals to be delivered truly asynchronously, just use	2308	If you want signals to be delivered truly asynchronously, just use
2182	C<sigaction> as you would do without libev and forget about sharing	2309	C<sigaction> as you would do without libev and forget about sharing
2183	the signal. You can even use C<ev_async> from a signal handler to	2310	the signal. You can even use C<ev_async> from a signal handler to
…		…
2225	I<has> to modify the signal mask, at least temporarily.	2352	I<has> to modify the signal mask, at least temporarily.
2226		2353
2227	So I can't stress this enough: I<If you do not reset your signal mask when	2354	So I can't stress this enough: I<If you do not reset your signal mask when
2228	you expect it to be empty, you have a race condition in your code>. This	2355	you expect it to be empty, you have a race condition in your code>. This
2229	is not a libev-specific thing, this is true for most event libraries.	2356	is not a libev-specific thing, this is true for most event libraries.
		2357
		2358	=head3 The special problem of threads signal handling
		2359
		2360	POSIX threads has problematic signal handling semantics, specifically,
		2361	a lot of functionality (sigfd, sigwait etc.) only really works if all
		2362	threads in a process block signals, which is hard to achieve.
		2363
		2364	When you want to use sigwait (or mix libev signal handling with your own
		2365	for the same signals), you can tackle this problem by globally blocking
		2366	all signals before creating any threads (or creating them with a fully set
		2367	sigprocmask) and also specifying the C<EVFLAG_NOSIGMASK> when creating
		2368	loops. Then designate one thread as "signal receiver thread" which handles
		2369	these signals. You can pass on any signals that libev might be interested
		2370	in by calling C<ev_feed_signal>.
2230		2371
2231	=head3 Watcher-Specific Functions and Data Members	2372	=head3 Watcher-Specific Functions and Data Members
2232		2373
2233	=over 4	2374	=over 4
2234		2375
…		…
3008	disadvantage of having to use multiple event loops (which do not support	3149	disadvantage of having to use multiple event loops (which do not support
3009	signal watchers).	3150	signal watchers).
3010		3151
3011	When this is not possible, or you want to use the default loop for	3152	When this is not possible, or you want to use the default loop for
3012	other reasons, then in the process that wants to start "fresh", call	3153	other reasons, then in the process that wants to start "fresh", call
3013	C<ev_default_destroy ()> followed by C<ev_default_loop (...)>. Destroying	3154	C<ev_loop_destroy (EV_DEFAULT)> followed by C<ev_default_loop (...)>.
3014	the default loop will "orphan" (not stop) all registered watchers, so you	3155	Destroying the default loop will "orphan" (not stop) all registered
3015	have to be careful not to execute code that modifies those watchers. Note	3156	watchers, so you have to be careful not to execute code that modifies
3016	also that in that case, you have to re-register any signal watchers.	3157	those watchers. Note also that in that case, you have to re-register any
		3158	signal watchers.
3017		3159
3018	=head3 Watcher-Specific Functions and Data Members	3160	=head3 Watcher-Specific Functions and Data Members
3019		3161
3020	=over 4	3162	=over 4
3021		3163
3022	=item ev_fork_init (ev_signal *, callback)	3164	=item ev_fork_init (ev_fork *, callback)
3023		3165
3024	Initialises and configures the fork watcher - it has no parameters of any	3166	Initialises and configures the fork watcher - it has no parameters of any
3025	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	3167	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
3026	believe me.	3168	really.
3027		3169
3028	=back	3170	=back
		3171
		3172
		3173	=head2 C<ev_cleanup> - even the best things end
		3174
		3175	Cleanup watchers are called just before the event loop is being destroyed
		3176	by a call to C<ev_loop_destroy>.
		3177
		3178	While there is no guarantee that the event loop gets destroyed, cleanup
		3179	watchers provide a convenient method to install cleanup hooks for your
		3180	program, worker threads and so on - you just to make sure to destroy the
		3181	loop when you want them to be invoked.
		3182
		3183	Cleanup watchers are invoked in the same way as any other watcher. Unlike
		3184	all other watchers, they do not keep a reference to the event loop (which
		3185	makes a lot of sense if you think about it). Like all other watchers, you
		3186	can call libev functions in the callback, except C<ev_cleanup_start>.
		3187
		3188	=head3 Watcher-Specific Functions and Data Members
		3189
		3190	=over 4
		3191
		3192	=item ev_cleanup_init (ev_cleanup *, callback)
		3193
		3194	Initialises and configures the cleanup watcher - it has no parameters of
		3195	any kind. There is a C<ev_cleanup_set> macro, but using it is utterly
		3196	pointless, I assure you.
		3197
		3198	=back
		3199
		3200	Example: Register an atexit handler to destroy the default loop, so any
		3201	cleanup functions are called.
		3202
		3203	static void
		3204	program_exits (void)
		3205	{
		3206	ev_loop_destroy (EV_DEFAULT_UC);
		3207	}
		3208
		3209	...
		3210	atexit (program_exits);
3029		3211
3030		3212
3031	=head2 C<ev_async> - how to wake up an event loop	3213	=head2 C<ev_async> - how to wake up an event loop
3032		3214
3033	In general, you cannot use an C<ev_run> from multiple threads or other	3215	In general, you cannot use an C<ev_run> from multiple threads or other
…		…
3040	it by calling C<ev_async_send>, which is thread- and signal safe.	3222	it by calling C<ev_async_send>, which is thread- and signal safe.
3041		3223
3042	This functionality is very similar to C<ev_signal> watchers, as signals,	3224	This functionality is very similar to C<ev_signal> watchers, as signals,
3043	too, are asynchronous in nature, and signals, too, will be compressed	3225	too, are asynchronous in nature, and signals, too, will be compressed
3044	(i.e. the number of callback invocations may be less than the number of	3226	(i.e. the number of callback invocations may be less than the number of
3045	C<ev_async_sent> calls).	3227	C<ev_async_sent> calls). In fact, you could use signal watchers as a kind
		3228	of "global async watchers" by using a watcher on an otherwise unused
		3229	signal, and C<ev_feed_signal> to signal this watcher from another thread,
		3230	even without knowing which loop owns the signal.
3046		3231
3047	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not	3232	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not
3048	just the default loop.	3233	just the default loop.
3049		3234
3050	=head3 Queueing	3235	=head3 Queueing
…		…
3226	Feed an event on the given fd, as if a file descriptor backend detected	3411	Feed an event on the given fd, as if a file descriptor backend detected
3227	the given events it.	3412	the given events it.
3228		3413
3229	=item ev_feed_signal_event (loop, int signum)	3414	=item ev_feed_signal_event (loop, int signum)
3230		3415
3231	Feed an event as if the given signal occurred (C<loop> must be the default	3416	Feed an event as if the given signal occurred. See also C<ev_feed_signal>,
3232	loop!).	3417	which is async-safe.
		3418
		3419	=back
		3420
		3421
		3422	=head1 COMMON OR USEFUL IDIOMS (OR BOTH)
		3423
		3424	This section explains some common idioms that are not immediately
		3425	obvious. Note that examples are sprinkled over the whole manual, and this
		3426	section only contains stuff that wouldn't fit anywhere else.
		3427
		3428	=over 4
		3429
		3430	=item Model/nested event loop invocations and exit conditions.
		3431
		3432	Often (especially in GUI toolkits) there are places where you have
		3433	I<modal> interaction, which is most easily implemented by recursively
		3434	invoking C<ev_run>.
		3435
		3436	This brings the problem of exiting - a callback might want to finish the
		3437	main C<ev_run> call, but not the nested one (e.g. user clicked "Quit", but
		3438	a modal "Are you sure?" dialog is still waiting), or just the nested one
		3439	and not the main one (e.g. user clocked "Ok" in a modal dialog), or some
		3440	other combination: In these cases, C<ev_break> will not work alone.
		3441
		3442	The solution is to maintain "break this loop" variable for each C<ev_run>
		3443	invocation, and use a loop around C<ev_run> until the condition is
		3444	triggered, using C<EVRUN_ONCE>:
		3445
		3446	// main loop
		3447	int exit_main_loop = 0;
		3448
		3449	while (!exit_main_loop)
		3450	ev_run (EV_DEFAULT_ EVRUN_ONCE);
		3451
		3452	// in a model watcher
		3453	int exit_nested_loop = 0;
		3454
		3455	while (!exit_nested_loop)
		3456	ev_run (EV_A_ EVRUN_ONCE);
		3457
		3458	To exit from any of these loops, just set the corresponding exit variable:
		3459
		3460	// exit modal loop
		3461	exit_nested_loop = 1;
		3462
		3463	// exit main program, after modal loop is finished
		3464	exit_main_loop = 1;
		3465
		3466	// exit both
		3467	exit_main_loop = exit_nested_loop = 1;
3233		3468
3234	=back	3469	=back
3235		3470
3236		3471
3237	=head1 LIBEVENT EMULATION	3472	=head1 LIBEVENT EMULATION
3238		3473
3239	Libev offers a compatibility emulation layer for libevent. It cannot	3474	Libev offers a compatibility emulation layer for libevent. It cannot
3240	emulate the internals of libevent, so here are some usage hints:	3475	emulate the internals of libevent, so here are some usage hints:
3241		3476
3242	=over 4	3477	=over 4
		3478
		3479	=item * Only the libevent-1.4.1-beta API is being emulated.
		3480
		3481	This was the newest libevent version available when libev was implemented,
		3482	and is still mostly unchanged in 2010.
3243		3483
3244	=item * Use it by including <event.h>, as usual.	3484	=item * Use it by including <event.h>, as usual.
3245		3485
3246	=item * The following members are fully supported: ev_base, ev_callback,	3486	=item * The following members are fully supported: ev_base, ev_callback,
3247	ev_arg, ev_fd, ev_res, ev_events.	3487	ev_arg, ev_fd, ev_res, ev_events.
…		…
3253	=item * Priorities are not currently supported. Initialising priorities	3493	=item * Priorities are not currently supported. Initialising priorities
3254	will fail and all watchers will have the same priority, even though there	3494	will fail and all watchers will have the same priority, even though there
3255	is an ev_pri field.	3495	is an ev_pri field.
3256		3496
3257	=item * In libevent, the last base created gets the signals, in libev, the	3497	=item * In libevent, the last base created gets the signals, in libev, the
3258	first base created (== the default loop) gets the signals.	3498	base that registered the signal gets the signals.
3259		3499
3260	=item * Other members are not supported.	3500	=item * Other members are not supported.
3261		3501
3262	=item * The libev emulation is I<not> ABI compatible to libevent, you need	3502	=item * The libev emulation is I<not> ABI compatible to libevent, you need
3263	to use the libev header file and library.	3503	to use the libev header file and library.
…		…
3282	Care has been taken to keep the overhead low. The only data member the C++	3522	Care has been taken to keep the overhead low. The only data member the C++
3283	classes add (compared to plain C-style watchers) is the event loop pointer	3523	classes add (compared to plain C-style watchers) is the event loop pointer
3284	that the watcher is associated with (or no additional members at all if	3524	that the watcher is associated with (or no additional members at all if
3285	you disable C<EV_MULTIPLICITY> when embedding libev).	3525	you disable C<EV_MULTIPLICITY> when embedding libev).
3286		3526
3287	Currently, functions, and static and non-static member functions can be	3527	Currently, functions, static and non-static member functions and classes
3288	used as callbacks. Other types should be easy to add as long as they only	3528	with C<operator ()> can be used as callbacks. Other types should be easy
3289	need one additional pointer for context. If you need support for other	3529	to add as long as they only need one additional pointer for context. If
3290	types of functors please contact the author (preferably after implementing	3530	you need support for other types of functors please contact the author
3291	it).	3531	(preferably after implementing it).
3292		3532
3293	Here is a list of things available in the C<ev> namespace:	3533	Here is a list of things available in the C<ev> namespace:
3294		3534
3295	=over 4	3535	=over 4
3296		3536
…		…
4467	=head3 C<kqueue> is buggy	4707	=head3 C<kqueue> is buggy
4468		4708
4469	The kqueue syscall is broken in all known versions - most versions support	4709	The kqueue syscall is broken in all known versions - most versions support
4470	only sockets, many support pipes.	4710	only sockets, many support pipes.
4471		4711
4472	Libev tries to work around this by not using C<kqueue> by default on	4712	Libev tries to work around this by not using C<kqueue> by default on this
4473	this rotten platform, but of course you can still ask for it when creating	4713	rotten platform, but of course you can still ask for it when creating a
4474	a loop.	4714	loop - embedding a socket-only kqueue loop into a select-based one is
		4715	probably going to work well.
4475		4716
4476	=head3 C<poll> is buggy	4717	=head3 C<poll> is buggy
4477		4718
4478	Instead of fixing C<kqueue>, Apple replaced their (working) C<poll>	4719	Instead of fixing C<kqueue>, Apple replaced their (working) C<poll>
4479	implementation by something calling C<kqueue> internally around the 10.5.6	4720	implementation by something calling C<kqueue> internally around the 10.5.6
…		…
4498		4739
4499	=head3 C<errno> reentrancy	4740	=head3 C<errno> reentrancy
4500		4741
4501	The default compile environment on Solaris is unfortunately so	4742	The default compile environment on Solaris is unfortunately so
4502	thread-unsafe that you can't even use components/libraries compiled	4743	thread-unsafe that you can't even use components/libraries compiled
4503	without C<-D_REENTRANT> (as long as they use C<errno>), which, of course,	4744	without C<-D_REENTRANT> in a threaded program, which, of course, isn't
4504	isn't defined by default.	4745	defined by default. A valid, if stupid, implementation choice.
4505		4746
4506	If you want to use libev in threaded environments you have to make sure	4747	If you want to use libev in threaded environments you have to make sure
4507	it's compiled with C<_REENTRANT> defined.	4748	it's compiled with C<_REENTRANT> defined.
4508		4749
4509	=head3 Event port backend	4750	=head3 Event port backend
4510		4751
4511	The scalable event interface for Solaris is called "event ports". Unfortunately,	4752	The scalable event interface for Solaris is called "event
4512	this mechanism is very buggy. If you run into high CPU usage, your program	4753	ports". Unfortunately, this mechanism is very buggy in all major
		4754	releases. If you run into high CPU usage, your program freezes or you get
4513	freezes or you get a large number of spurious wakeups, make sure you have	4755	a large number of spurious wakeups, make sure you have all the relevant
4514	all the relevant and latest kernel patches applied. No, I don't know which	4756	and latest kernel patches applied. No, I don't know which ones, but there
4515	ones, but there are multiple ones.	4757	are multiple ones to apply, and afterwards, event ports actually work
		4758	great.
4516		4759
4517	If you can't get it to work, you can try running the program by setting	4760	If you can't get it to work, you can try running the program by setting
4518	the environment variable C<LIBEV_FLAGS=3> to only allow C<poll> and	4761	the environment variable C<LIBEV_FLAGS=3> to only allow C<poll> and
4519	C<select> backends.	4762	C<select> backends.
4520		4763
4521	=head2 AIX POLL BUG	4764	=head2 AIX POLL BUG
4522		4765
4523	AIX unfortunately has a broken C<poll.h> header. Libev works around	4766	AIX unfortunately has a broken C<poll.h> header. Libev works around
4524	this by trying to avoid the poll backend altogether (i.e. it's not even	4767	this by trying to avoid the poll backend altogether (i.e. it's not even
4525	compiled in), which normally isn't a big problem as C<select> works fine	4768	compiled in), which normally isn't a big problem as C<select> works fine
4526	with large bitsets, and AIX is dead anyway.	4769	with large bitsets on AIX, and AIX is dead anyway.
4527		4770
4528	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS	4771	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
4529		4772
4530	=head3 General issues	4773	=head3 General issues
4531		4774
…		…
4637	structure (guaranteed by POSIX but not by ISO C for example), but it also	4880	structure (guaranteed by POSIX but not by ISO C for example), but it also
4638	assumes that the same (machine) code can be used to call any watcher	4881	assumes that the same (machine) code can be used to call any watcher
4639	callback: The watcher callbacks have different type signatures, but libev	4882	callback: The watcher callbacks have different type signatures, but libev
4640	calls them using an C<ev_watcher *> internally.	4883	calls them using an C<ev_watcher *> internally.
4641		4884
		4885	=item pointer accesses must be thread-atomic
		4886
		4887	Accessing a pointer value must be atomic, it must both be readable and
		4888	writable in one piece - this is the case on all current architectures.
		4889
4642	=item C<sig_atomic_t volatile> must be thread-atomic as well	4890	=item C<sig_atomic_t volatile> must be thread-atomic as well
4643		4891
4644	The type C<sig_atomic_t volatile> (or whatever is defined as	4892	The type C<sig_atomic_t volatile> (or whatever is defined as
4645	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different	4893	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different
4646	threads. This is not part of the specification for C<sig_atomic_t>, but is	4894	threads. This is not part of the specification for C<sig_atomic_t>, but is
…		…
4752	=back	5000	=back
4753		5001
4754		5002
4755	=head1 PORTING FROM LIBEV 3.X TO 4.X	5003	=head1 PORTING FROM LIBEV 3.X TO 4.X
4756		5004
4757	The major version 4 introduced some minor incompatible changes to the API.	5005	The major version 4 introduced some incompatible changes to the API.
4758		5006
4759	At the moment, the C<ev.h> header file tries to implement superficial	5007	At the moment, the C<ev.h> header file provides compatibility definitions
4760	compatibility, so most programs should still compile. Those might be	5008	for all changes, so most programs should still compile. The compatibility
4761	removed in later versions of libev, so better update early than late.	5009	layer might be removed in later versions of libev, so better update to the
		5010	new API early than late.
4762		5011
4763	=over 4	5012	=over 4
		5013
		5014	=item C<EV_COMPAT3> backwards compatibility mechanism
		5015
		5016	The backward compatibility mechanism can be controlled by
		5017	C<EV_COMPAT3>. See L<PREPROCESSOR SYMBOLS/MACROS> in the L<EMBEDDING>
		5018	section.
		5019
		5020	=item C<ev_default_destroy> and C<ev_default_fork> have been removed
		5021
		5022	These calls can be replaced easily by their C<ev_loop_xxx> counterparts:
		5023
		5024	ev_loop_destroy (EV_DEFAULT_UC);
		5025	ev_loop_fork (EV_DEFAULT);
4764		5026
4765	=item function/symbol renames	5027	=item function/symbol renames
4766		5028
4767	A number of functions and symbols have been renamed:	5029	A number of functions and symbols have been renamed:
4768		5030
…		…
4787	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme	5049	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme
4788	as all other watcher types. Note that C<ev_loop_fork> is still called	5050	as all other watcher types. Note that C<ev_loop_fork> is still called
4789	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>	5051	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>
4790	typedef.	5052	typedef.
4791		5053
4792	=item C<EV_COMPAT3> backwards compatibility mechanism
4793
4794	The backward compatibility mechanism can be controlled by
4795	C<EV_COMPAT3>. See L<PREPROCESSOR SYMBOLS/MACROS> in the L<EMBEDDING>
4796	section.
4797
4798	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>	5054	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>
4799		5055
4800	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different	5056	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different
4801	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile	5057	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile
4802	and work, but the library code will of course be larger.	5058	and work, but the library code will of course be larger.
…		…
4808		5064
4809	=over 4	5065	=over 4
4810		5066
4811	=item active	5067	=item active
4812		5068
4813	A watcher is active as long as it has been started (has been attached to	5069	A watcher is active as long as it has been started and not yet stopped.
4814	an event loop) but not yet stopped (disassociated from the event loop).	5070	See L<WATCHER STATES> for details.
4815		5071
4816	=item application	5072	=item application
4817		5073
4818	In this document, an application is whatever is using libev.	5074	In this document, an application is whatever is using libev.
		5075
		5076	=item backend
		5077
		5078	The part of the code dealing with the operating system interfaces.
4819		5079
4820	=item callback	5080	=item callback
4821		5081
4822	The address of a function that is called when some event has been	5082	The address of a function that is called when some event has been
4823	detected. Callbacks are being passed the event loop, the watcher that	5083	detected. Callbacks are being passed the event loop, the watcher that
4824	received the event, and the actual event bitset.	5084	received the event, and the actual event bitset.
4825		5085
4826	=item callback invocation	5086	=item callback/watcher invocation
4827		5087
4828	The act of calling the callback associated with a watcher.	5088	The act of calling the callback associated with a watcher.
4829		5089
4830	=item event	5090	=item event
4831		5091
…		…
4850	The model used to describe how an event loop handles and processes	5110	The model used to describe how an event loop handles and processes
4851	watchers and events.	5111	watchers and events.
4852		5112
4853	=item pending	5113	=item pending
4854		5114
4855	A watcher is pending as soon as the corresponding event has been detected,	5115	A watcher is pending as soon as the corresponding event has been
4856	and stops being pending as soon as the watcher will be invoked or its	5116	detected. See L<WATCHER STATES> for details.
4857	pending status is explicitly cleared by the application.
4858
4859	A watcher can be pending, but not active. Stopping a watcher also clears
4860	its pending status.
4861		5117
4862	=item real time	5118	=item real time
4863		5119
4864	The physical time that is observed. It is apparently strictly monotonic :)	5120	The physical time that is observed. It is apparently strictly monotonic :)
4865		5121
…		…
4872	=item watcher	5128	=item watcher
4873		5129
4874	A data structure that describes interest in certain events. Watchers need	5130	A data structure that describes interest in certain events. Watchers need
4875	to be started (attached to an event loop) before they can receive events.	5131	to be started (attached to an event loop) before they can receive events.
4876		5132
4877	=item watcher invocation
4878
4879	The act of calling the callback associated with a watcher.
4880
4881	=back	5133	=back
4882		5134
4883	=head1 AUTHOR	5135	=head1 AUTHOR
4884		5136
4885	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael Magnusson.	5137	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael
		5138	Magnusson and Emanuele Giaquinta.
4886		5139

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing libev/ev.pod (file contents): Revision 1.310 by root, Thu Oct 21 12:32:47 2010 UTC vs. Revision 1.350 by sf-exg, Mon Jan 10 08:36:41 2011 UTC

Diff Legend

Comparing libev/ev.pod (file contents):
Revision 1.310 by root, Thu Oct 21 12:32:47 2010 UTC vs.
Revision 1.350 by sf-exg, Mon Jan 10 08:36:41 2011 UTC