[ViewVC] Diff of: cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.321 by sf-exg, Fri Oct 22 10:50:24 2010 UTC vs.
Revision 1.349 by root, Mon Jan 10 01:58:55 2011 UTC

…		…
43		43
44	int	44	int
45	main (void)	45	main (void)
46	{	46	{
47	// use the default event loop unless you have special needs	47	// use the default event loop unless you have special needs
48	struct ev_loop *loop = ev_default_loop (0);	48	struct ev_loop *loop = EV_DEFAULT;
49		49
50	// initialise an io watcher, then start it	50	// initialise an io watcher, then start it
51	// this one will watch for stdin to become readable	51	// this one will watch for stdin to become readable
52	ev_io_init (&stdin_watcher, stdin_cb, /STDIN_FILENO/ 0, EV_READ);	52	ev_io_init (&stdin_watcher, stdin_cb, /STDIN_FILENO/ 0, EV_READ);
53	ev_io_start (loop, &stdin_watcher);	53	ev_io_start (loop, &stdin_watcher);
…		…
77	on event-based programming, nor will it introduce event-based programming	77	on event-based programming, nor will it introduce event-based programming
78	with libev.	78	with libev.
79		79
80	Familiarity with event based programming techniques in general is assumed	80	Familiarity with event based programming techniques in general is assumed
81	throughout this document.	81	throughout this document.
		82
		83	=head1 WHAT TO READ WHEN IN A HURRY
		84
		85	This manual tries to be very detailed, but unfortunately, this also makes
		86	it very long. If you just want to know the basics of libev, I suggest
		87	reading L<ANATOMY OF A WATCHER>, then the L<EXAMPLE PROGRAM> above and
		88	look up the missing functions in L<GLOBAL FUNCTIONS> and the C<ev_io> and
		89	C<ev_timer> sections in L<WATCHER TYPES>.
82		90
83	=head1 ABOUT LIBEV	91	=head1 ABOUT LIBEV
84		92
85	Libev is an event loop: you register interest in certain events (such as a	93	Libev is an event loop: you register interest in certain events (such as a
86	file descriptor being readable or a timeout occurring), and it will manage	94	file descriptor being readable or a timeout occurring), and it will manage
…		…
233	the current system, you would need to look at C<ev_embeddable_backends ()	241	the current system, you would need to look at C<ev_embeddable_backends ()
234	& ev_supported_backends ()>, likewise for recommended ones.	242	& ev_supported_backends ()>, likewise for recommended ones.
235		243
236	See the description of C<ev_embed> watchers for more info.	244	See the description of C<ev_embed> watchers for more info.
237		245
238	=item ev_set_allocator (void (cb)(void *ptr, long size)) [NOT REENTRANT]	246	=item ev_set_allocator (void (cb)(void *ptr, long size))
239		247
240	Sets the allocation function to use (the prototype is similar - the	248	Sets the allocation function to use (the prototype is similar - the
241	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is	249	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
242	used to allocate and free memory (no surprises here). If it returns zero	250	used to allocate and free memory (no surprises here). If it returns zero
243	when memory needs to be allocated (C<size != 0>), the library might abort	251	when memory needs to be allocated (C<size != 0>), the library might abort
…		…
269	}	277	}
270		278
271	...	279	...
272	ev_set_allocator (persistent_realloc);	280	ev_set_allocator (persistent_realloc);
273		281
274	=item ev_set_syserr_cb (void (cb)(const char msg)); [NOT REENTRANT]	282	=item ev_set_syserr_cb (void (cb)(const char msg))
275		283
276	Set the callback function to call on a retryable system call error (such	284	Set the callback function to call on a retryable system call error (such
277	as failed select, poll, epoll_wait). The message is a printable string	285	as failed select, poll, epoll_wait). The message is a printable string
278	indicating the system call or subsystem causing the problem. If this	286	indicating the system call or subsystem causing the problem. If this
279	callback is set, then libev will expect it to remedy the situation, no	287	callback is set, then libev will expect it to remedy the situation, no
…		…
291	}	299	}
292		300
293	...	301	...
294	ev_set_syserr_cb (fatal_error);	302	ev_set_syserr_cb (fatal_error);
295		303
		304	=item ev_feed_signal (int signum)
		305
		306	This function can be used to "simulate" a signal receive. It is completely
		307	safe to call this function at any time, from any context, including signal
		308	handlers or random threads.
		309
		310	It's main use is to customise signal handling in your process, especially
		311	in the presence of threads. For example, you could block signals
		312	by default in all threads (and specifying C<EVFLAG_NOSIGMASK> when
		313	creating any loops), and in one thread, use C<sigwait> or any other
		314	mechanism to wait for signals, then "deliver" them to libev by calling
		315	C<ev_feed_signal>.
		316
296	=back	317	=back
297		318
298	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	319	=head1 FUNCTIONS CONTROLLING EVENT LOOPS
299		320
300	An event loop is described by a C<struct ev_loop *> (the C<struct> is	321	An event loop is described by a C<struct ev_loop *> (the C<struct> is
301	I<not> optional in this case unless libev 3 compatibility is disabled, as	322	I<not> optional in this case unless libev 3 compatibility is disabled, as
302	libev 3 had an C<ev_loop> function colliding with the struct name).	323	libev 3 had an C<ev_loop> function colliding with the struct name).
303		324
304	The library knows two types of such loops, the I<default> loop, which	325	The library knows two types of such loops, the I<default> loop, which
305	supports signals and child events, and dynamically created event loops	326	supports child process events, and dynamically created event loops which
306	which do not.	327	do not.
307		328
308	=over 4	329	=over 4
309		330
310	=item struct ev_loop *ev_default_loop (unsigned int flags)	331	=item struct ev_loop *ev_default_loop (unsigned int flags)
311		332
312	This will initialise the default event loop if it hasn't been initialised	333	This returns the "default" event loop object, which is what you should
313	yet and return it. If the default loop could not be initialised, returns	334	normally use when you just need "the event loop". Event loop objects and
314	false. If it already was initialised it simply returns it (and ignores the	335	the C<flags> parameter are described in more detail in the entry for
315	flags. If that is troubling you, check C<ev_backend ()> afterwards).	336	C<ev_loop_new>.
		337
		338	If the default loop is already initialised then this function simply
		339	returns it (and ignores the flags. If that is troubling you, check
		340	C<ev_backend ()> afterwards). Otherwise it will create it with the given
		341	flags, which should almost always be C<0>, unless the caller is also the
		342	one calling C<ev_run> or otherwise qualifies as "the main program".
316		343
317	If you don't know what event loop to use, use the one returned from this	344	If you don't know what event loop to use, use the one returned from this
318	function.	345	function (or via the C<EV_DEFAULT> macro).
319		346
320	Note that this function is I<not> thread-safe, so if you want to use it	347	Note that this function is I<not> thread-safe, so if you want to use it
321	from multiple threads, you have to lock (note also that this is unlikely,	348	from multiple threads, you have to employ some kind of mutex (note also
322	as loops cannot be shared easily between threads anyway).	349	that this case is unlikely, as loops cannot be shared easily between
		350	threads anyway).
323		351
324	The default loop is the only loop that can handle C<ev_signal> and	352	The default loop is the only loop that can handle C<ev_child> watchers,
325	C<ev_child> watchers, and to do this, it always registers a handler	353	and to do this, it always registers a handler for C<SIGCHLD>. If this is
326	for C<SIGCHLD>. If this is a problem for your application you can either	354	a problem for your application you can either create a dynamic loop with
327	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you	355	C<ev_loop_new> which doesn't do that, or you can simply overwrite the
328	can simply overwrite the C<SIGCHLD> signal handler I<after> calling	356	C<SIGCHLD> signal handler I<after> calling C<ev_default_init>.
329	C<ev_default_init>.	357
		358	Example: This is the most typical usage.
		359
		360	if (!ev_default_loop (0))
		361	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		362
		363	Example: Restrict libev to the select and poll backends, and do not allow
		364	environment settings to be taken into account:
		365
		366	ev_default_loop (EVBACKEND_POLL \| EVBACKEND_SELECT \| EVFLAG_NOENV);
		367
		368	=item struct ev_loop *ev_loop_new (unsigned int flags)
		369
		370	This will create and initialise a new event loop object. If the loop
		371	could not be initialised, returns false.
		372
		373	This function is thread-safe, and one common way to use libev with
		374	threads is indeed to create one loop per thread, and using the default
		375	loop in the "main" or "initial" thread.
330		376
331	The flags argument can be used to specify special behaviour or specific	377	The flags argument can be used to specify special behaviour or specific
332	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	378	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
333		379
334	The following flags are supported:	380	The following flags are supported:
…		…
369	environment variable.	415	environment variable.
370		416
371	=item C<EVFLAG_NOINOTIFY>	417	=item C<EVFLAG_NOINOTIFY>
372		418
373	When this flag is specified, then libev will not attempt to use the	419	When this flag is specified, then libev will not attempt to use the
374	I<inotify> API for it's C<ev_stat> watchers. Apart from debugging and	420	I<inotify> API for its C<ev_stat> watchers. Apart from debugging and
375	testing, this flag can be useful to conserve inotify file descriptors, as	421	testing, this flag can be useful to conserve inotify file descriptors, as
376	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.	422	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.
377		423
378	=item C<EVFLAG_SIGNALFD>	424	=item C<EVFLAG_SIGNALFD>
379		425
380	When this flag is specified, then libev will attempt to use the	426	When this flag is specified, then libev will attempt to use the
381	I<signalfd> API for it's C<ev_signal> (and C<ev_child>) watchers. This API	427	I<signalfd> API for its C<ev_signal> (and C<ev_child>) watchers. This API
382	delivers signals synchronously, which makes it both faster and might make	428	delivers signals synchronously, which makes it both faster and might make
383	it possible to get the queued signal data. It can also simplify signal	429	it possible to get the queued signal data. It can also simplify signal
384	handling with threads, as long as you properly block signals in your	430	handling with threads, as long as you properly block signals in your
385	threads that are not interested in handling them.	431	threads that are not interested in handling them.
386		432
387	Signalfd will not be used by default as this changes your signal mask, and	433	Signalfd will not be used by default as this changes your signal mask, and
388	there are a lot of shoddy libraries and programs (glib's threadpool for	434	there are a lot of shoddy libraries and programs (glib's threadpool for
389	example) that can't properly initialise their signal masks.	435	example) that can't properly initialise their signal masks.
		436
		437	=item C<EVFLAG_NOSIGMASK>
		438
		439	When this flag is specified, then libev will avoid to modify the signal
		440	mask. Specifically, this means you ahve to make sure signals are unblocked
		441	when you want to receive them.
		442
		443	This behaviour is useful when you want to do your own signal handling, or
		444	want to handle signals only in specific threads and want to avoid libev
		445	unblocking the signals.
		446
		447	This flag's behaviour will become the default in future versions of libev.
390		448
391	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	449	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
392		450
393	This is your standard select(2) backend. Not I<completely> standard, as	451	This is your standard select(2) backend. Not I<completely> standard, as
394	libev tries to roll its own fd_set with no limits on the number of fds,	452	libev tries to roll its own fd_set with no limits on the number of fds,
…		…
430	epoll scales either O(1) or O(active_fds).	488	epoll scales either O(1) or O(active_fds).
431		489
432	The epoll mechanism deserves honorable mention as the most misdesigned	490	The epoll mechanism deserves honorable mention as the most misdesigned
433	of the more advanced event mechanisms: mere annoyances include silently	491	of the more advanced event mechanisms: mere annoyances include silently
434	dropping file descriptors, requiring a system call per change per file	492	dropping file descriptors, requiring a system call per change per file
435	descriptor (and unnecessary guessing of parameters), problems with dup and	493	descriptor (and unnecessary guessing of parameters), problems with dup,
		494	returning before the timeout value, resulting in additional iterations
		495	(and only giving 5ms accuracy while select on the same platform gives
436	so on. The biggest issue is fork races, however - if a program forks then	496	0.1ms) and so on. The biggest issue is fork races, however - if a program
437	I<both> parent and child process have to recreate the epoll set, which can	497	forks then I<both> parent and child process have to recreate the epoll
438	take considerable time (one syscall per file descriptor) and is of course	498	set, which can take considerable time (one syscall per file descriptor)
439	hard to detect.	499	and is of course hard to detect.
440		500
441	Epoll is also notoriously buggy - embedding epoll fds I<should> work, but	501	Epoll is also notoriously buggy - embedding epoll fds I<should> work, but
442	of course I<doesn't>, and epoll just loves to report events for totally	502	of course I<doesn't>, and epoll just loves to report events for totally
443	I<different> file descriptors (even already closed ones, so one cannot	503	I<different> file descriptors (even already closed ones, so one cannot
444	even remove them from the set) than registered in the set (especially	504	even remove them from the set) than registered in the set (especially
…		…
446	employing an additional generation counter and comparing that against the	506	employing an additional generation counter and comparing that against the
447	events to filter out spurious ones, recreating the set when required. Last	507	events to filter out spurious ones, recreating the set when required. Last
448	not least, it also refuses to work with some file descriptors which work	508	not least, it also refuses to work with some file descriptors which work
449	perfectly fine with C<select> (files, many character devices...).	509	perfectly fine with C<select> (files, many character devices...).
450		510
		511	Epoll is truly the train wreck analog among event poll mechanisms.
		512
451	While stopping, setting and starting an I/O watcher in the same iteration	513	While stopping, setting and starting an I/O watcher in the same iteration
452	will result in some caching, there is still a system call per such	514	will result in some caching, there is still a system call per such
453	incident (because the same I<file descriptor> could point to a different	515	incident (because the same I<file descriptor> could point to a different
454	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed	516	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed
455	file descriptors might not work very well if you register events for both	517	file descriptors might not work very well if you register events for both
…		…
543		605
544	Try all backends (even potentially broken ones that wouldn't be tried	606	Try all backends (even potentially broken ones that wouldn't be tried
545	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	607	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
546	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	608	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
547		609
548	It is definitely not recommended to use this flag.	610	It is definitely not recommended to use this flag, use whatever
		611	C<ev_recommended_backends ()> returns, or simply do not specify a backend
		612	at all.
		613
		614	=item C<EVBACKEND_MASK>
		615
		616	Not a backend at all, but a mask to select all backend bits from a
		617	C<flags> value, in case you want to mask out any backends from a flags
		618	value (e.g. when modifying the C<LIBEV_FLAGS> environment variable).
549		619
550	=back	620	=back
551		621
552	If one or more of the backend flags are or'ed into the flags value,	622	If one or more of the backend flags are or'ed into the flags value,
553	then only these backends will be tried (in the reverse order as listed	623	then only these backends will be tried (in the reverse order as listed
554	here). If none are specified, all backends in C<ev_recommended_backends	624	here). If none are specified, all backends in C<ev_recommended_backends
555	()> will be tried.	625	()> will be tried.
556		626
557	Example: This is the most typical usage.
558
559	if (!ev_default_loop (0))
560	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
561
562	Example: Restrict libev to the select and poll backends, and do not allow
563	environment settings to be taken into account:
564
565	ev_default_loop (EVBACKEND_POLL \| EVBACKEND_SELECT \| EVFLAG_NOENV);
566
567	Example: Use whatever libev has to offer, but make sure that kqueue is
568	used if available (warning, breaks stuff, best use only with your own
569	private event loop and only if you know the OS supports your types of
570	fds):
571
572	ev_default_loop (ev_recommended_backends () \| EVBACKEND_KQUEUE);
573
574	=item struct ev_loop *ev_loop_new (unsigned int flags)
575
576	Similar to C<ev_default_loop>, but always creates a new event loop that is
577	always distinct from the default loop.
578
579	Note that this function I<is> thread-safe, and one common way to use
580	libev with threads is indeed to create one loop per thread, and using the
581	default loop in the "main" or "initial" thread.
582
583	Example: Try to create a event loop that uses epoll and nothing else.	627	Example: Try to create a event loop that uses epoll and nothing else.
584		628
585	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL \| EVFLAG_NOENV);	629	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL \| EVFLAG_NOENV);
586	if (!epoller)	630	if (!epoller)
587	fatal ("no epoll found here, maybe it hides under your chair");	631	fatal ("no epoll found here, maybe it hides under your chair");
588		632
		633	Example: Use whatever libev has to offer, but make sure that kqueue is
		634	used if available.
		635
		636	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () \| EVBACKEND_KQUEUE);
		637
589	=item ev_default_destroy ()	638	=item ev_loop_destroy (loop)
590		639
591	Destroys the default loop (frees all memory and kernel state etc.). None	640	Destroys an event loop object (frees all memory and kernel state
592	of the active event watchers will be stopped in the normal sense, so	641	etc.). None of the active event watchers will be stopped in the normal
593	e.g. C<ev_is_active> might still return true. It is your responsibility to	642	sense, so e.g. C<ev_is_active> might still return true. It is your
594	either stop all watchers cleanly yourself I<before> calling this function,	643	responsibility to either stop all watchers cleanly yourself I<before>
595	or cope with the fact afterwards (which is usually the easiest thing, you	644	calling this function, or cope with the fact afterwards (which is usually
596	can just ignore the watchers and/or C<free ()> them for example).	645	the easiest thing, you can just ignore the watchers and/or C<free ()> them
		646	for example).
597		647
598	Note that certain global state, such as signal state (and installed signal	648	Note that certain global state, such as signal state (and installed signal
599	handlers), will not be freed by this function, and related watchers (such	649	handlers), will not be freed by this function, and related watchers (such
600	as signal and child watchers) would need to be stopped manually.	650	as signal and child watchers) would need to be stopped manually.
601		651
602	In general it is not advisable to call this function except in the	652	This function is normally used on loop objects allocated by
603	rare occasion where you really need to free e.g. the signal handling	653	C<ev_loop_new>, but it can also be used on the default loop returned by
		654	C<ev_default_loop>, in which case it is not thread-safe.
		655
		656	Note that it is not advisable to call this function on the default loop
		657	except in the rare occasion where you really need to free its resources.
604	pipe fds. If you need dynamically allocated loops it is better to use	658	If you need dynamically allocated loops it is better to use C<ev_loop_new>
605	C<ev_loop_new> and C<ev_loop_destroy>.	659	and C<ev_loop_destroy>.
606		660
607	=item ev_loop_destroy (loop)	661	=item ev_loop_fork (loop)
608		662
609	Like C<ev_default_destroy>, but destroys an event loop created by an
610	earlier call to C<ev_loop_new>.
611
612	=item ev_default_fork ()
613
614	This function sets a flag that causes subsequent C<ev_run> iterations	663	This function sets a flag that causes subsequent C<ev_run> iterations to
615	to reinitialise the kernel state for backends that have one. Despite the	664	reinitialise the kernel state for backends that have one. Despite the
616	name, you can call it anytime, but it makes most sense after forking, in	665	name, you can call it anytime, but it makes most sense after forking, in
617	the child process (or both child and parent, but that again makes little	666	the child process. You I<must> call it (or use C<EVFLAG_FORKCHECK>) in the
618	sense). You I<must> call it in the child before using any of the libev	667	child before resuming or calling C<ev_run>.
619	functions, and it will only take effect at the next C<ev_run> iteration.
620		668
621	Again, you I<have> to call it on I<any> loop that you want to re-use after	669	Again, you I<have> to call it on I<any> loop that you want to re-use after
622	a fork, I<even if you do not plan to use the loop in the parent>. This is	670	a fork, I<even if you do not plan to use the loop in the parent>. This is
623	because some kernel interfaces cough I<kqueue> cough do funny things	671	because some kernel interfaces cough I<kqueue> cough do funny things
624	during fork.	672	during fork.
…		…
629	call it at all (in fact, C<epoll> is so badly broken that it makes a	677	call it at all (in fact, C<epoll> is so badly broken that it makes a
630	difference, but libev will usually detect this case on its own and do a	678	difference, but libev will usually detect this case on its own and do a
631	costly reset of the backend).	679	costly reset of the backend).
632		680
633	The function itself is quite fast and it's usually not a problem to call	681	The function itself is quite fast and it's usually not a problem to call
634	it just in case after a fork. To make this easy, the function will fit in	682	it just in case after a fork.
635	quite nicely into a call to C<pthread_atfork>:
636		683
		684	Example: Automate calling C<ev_loop_fork> on the default loop when
		685	using pthreads.
		686
		687	static void
		688	post_fork_child (void)
		689	{
		690	ev_loop_fork (EV_DEFAULT);
		691	}
		692
		693	...
637	pthread_atfork (0, 0, ev_default_fork);	694	pthread_atfork (0, 0, post_fork_child);
638
639	=item ev_loop_fork (loop)
640
641	Like C<ev_default_fork>, but acts on an event loop created by
642	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
643	after fork that you want to re-use in the child, and how you keep track of
644	them is entirely your own problem.
645		695
646	=item int ev_is_default_loop (loop)	696	=item int ev_is_default_loop (loop)
647		697
648	Returns true when the given loop is, in fact, the default loop, and false	698	Returns true when the given loop is, in fact, the default loop, and false
649	otherwise.	699	otherwise.
…		…
660	prepare and check phases.	710	prepare and check phases.
661		711
662	=item unsigned int ev_depth (loop)	712	=item unsigned int ev_depth (loop)
663		713
664	Returns the number of times C<ev_run> was entered minus the number of	714	Returns the number of times C<ev_run> was entered minus the number of
665	times C<ev_run> was exited, in other words, the recursion depth.	715	times C<ev_run> was exited normally, in other words, the recursion depth.
666		716
667	Outside C<ev_run>, this number is zero. In a callback, this number is	717	Outside C<ev_run>, this number is zero. In a callback, this number is
668	C<1>, unless C<ev_run> was invoked recursively (or from another thread),	718	C<1>, unless C<ev_run> was invoked recursively (or from another thread),
669	in which case it is higher.	719	in which case it is higher.
670		720
671	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread	721	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread,
672	etc.), doesn't count as "exit" - consider this as a hint to avoid such	722	throwing an exception etc.), doesn't count as "exit" - consider this
673	ungentleman-like behaviour unless it's really convenient.	723	as a hint to avoid such ungentleman-like behaviour unless it's really
		724	convenient, in which case it is fully supported.
674		725
675	=item unsigned int ev_backend (loop)	726	=item unsigned int ev_backend (loop)
676		727
677	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	728	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
678	use.	729	use.
…		…
739	relying on all watchers to be stopped when deciding when a program has	790	relying on all watchers to be stopped when deciding when a program has
740	finished (especially in interactive programs), but having a program	791	finished (especially in interactive programs), but having a program
741	that automatically loops as long as it has to and no longer by virtue	792	that automatically loops as long as it has to and no longer by virtue
742	of relying on its watchers stopping correctly, that is truly a thing of	793	of relying on its watchers stopping correctly, that is truly a thing of
743	beauty.	794	beauty.
		795
		796	This function is also I<mostly> exception-safe - you can break out of
		797	a C<ev_run> call by calling C<longjmp> in a callback, throwing a C++
		798	exception and so on. This does not decrement the C<ev_depth> value, nor
		799	will it clear any outstanding C<EVBREAK_ONE> breaks.
744		800
745	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle	801	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle
746	those events and any already outstanding ones, but will not wait and	802	those events and any already outstanding ones, but will not wait and
747	block your process in case there are no events and will return after one	803	block your process in case there are no events and will return after one
748	iteration of the loop. This is sometimes useful to poll and handle new	804	iteration of the loop. This is sometimes useful to poll and handle new
…		…
810	Can be used to make a call to C<ev_run> return early (but only after it	866	Can be used to make a call to C<ev_run> return early (but only after it
811	has processed all outstanding events). The C<how> argument must be either	867	has processed all outstanding events). The C<how> argument must be either
812	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or	868	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or
813	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.	869	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.
814		870
815	This "unloop state" will be cleared when entering C<ev_run> again.	871	This "break state" will be cleared on the next call to C<ev_run>.
816		872
817	It is safe to call C<ev_break> from outside any C<ev_run> calls. ##TODO##	873	It is safe to call C<ev_break> from outside any C<ev_run> calls, too, in
		874	which case it will have no effect.
818		875
819	=item ev_ref (loop)	876	=item ev_ref (loop)
820		877
821	=item ev_unref (loop)	878	=item ev_unref (loop)
822		879
…		…
843	running when nothing else is active.	900	running when nothing else is active.
844		901
845	ev_signal exitsig;	902	ev_signal exitsig;
846	ev_signal_init (&exitsig, sig_cb, SIGINT);	903	ev_signal_init (&exitsig, sig_cb, SIGINT);
847	ev_signal_start (loop, &exitsig);	904	ev_signal_start (loop, &exitsig);
848	evf_unref (loop);	905	ev_unref (loop);
849		906
850	Example: For some weird reason, unregister the above signal handler again.	907	Example: For some weird reason, unregister the above signal handler again.
851		908
852	ev_ref (loop);	909	ev_ref (loop);
853	ev_signal_stop (loop, &exitsig);	910	ev_signal_stop (loop, &exitsig);
…		…
965	See also the locking example in the C<THREADS> section later in this	1022	See also the locking example in the C<THREADS> section later in this
966	document.	1023	document.
967		1024
968	=item ev_set_userdata (loop, void *data)	1025	=item ev_set_userdata (loop, void *data)
969		1026
970	=item ev_userdata (loop)	1027	=item void *ev_userdata (loop)
971		1028
972	Set and retrieve a single C<void *> associated with a loop. When	1029	Set and retrieve a single C<void *> associated with a loop. When
973	C<ev_set_userdata> has never been called, then C<ev_userdata> returns	1030	C<ev_set_userdata> has never been called, then C<ev_userdata> returns
974	C<0.>	1031	C<0>.
975		1032
976	These two functions can be used to associate arbitrary data with a loop,	1033	These two functions can be used to associate arbitrary data with a loop,
977	and are intended solely for the C<invoke_pending_cb>, C<release> and	1034	and are intended solely for the C<invoke_pending_cb>, C<release> and
978	C<acquire> callbacks described above, but of course can be (ab-)used for	1035	C<acquire> callbacks described above, but of course can be (ab-)used for
979	any other purpose as well.	1036	any other purpose as well.
…		…
1107	=item C<EV_FORK>	1164	=item C<EV_FORK>
1108		1165
1109	The event loop has been resumed in the child process after fork (see	1166	The event loop has been resumed in the child process after fork (see
1110	C<ev_fork>).	1167	C<ev_fork>).
1111		1168
		1169	=item C<EV_CLEANUP>
		1170
		1171	The event loop is about to be destroyed (see C<ev_cleanup>).
		1172
1112	=item C<EV_ASYNC>	1173	=item C<EV_ASYNC>
1113		1174
1114	The given async watcher has been asynchronously notified (see C<ev_async>).	1175	The given async watcher has been asynchronously notified (see C<ev_async>).
1115		1176
1116	=item C<EV_CUSTOM>	1177	=item C<EV_CUSTOM>
…		…
1137	programs, though, as the fd could already be closed and reused for another	1198	programs, though, as the fd could already be closed and reused for another
1138	thing, so beware.	1199	thing, so beware.
1139		1200
1140	=back	1201	=back
1141		1202
1142	=head2 WATCHER STATES
1143
1144	There are various watcher states mentioned throughout this manual -
1145	active, pending and so on. In this section these states and the rules to
1146	transition between them will be described in more detail - and while these
1147	rules might look complicated, they usually do "the right thing".
1148
1149	=over 4
1150
1151	=item initialiased
1152
1153	Before a watcher can be registered with the event looop it has to be
1154	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
1155	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
1156
1157	In this state it is simply some block of memory that is suitable for use
1158	in an event loop. It can be moved around, freed, reused etc. at will.
1159
1160	=item started/running/active
1161
1162	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
1163	property of the event loop, and is actively waiting for events. While in
1164	this state it cannot be accessed (except in a few documented ways), moved,
1165	freed or anything else - the only legal thing is to keep a pointer to it,
1166	and call libev functions on it that are documented to work on active watchers.
1167
1168	=item pending
1169
1170	If a watcher is active and libev determines that an event it is interested
1171	in has occurred (such as a timer expiring), it will become pending. It will
1172	stay in this pending state until either it is stopped or its callback is
1173	about to be invoked, so it is not normally pending inside the watcher
1174	callback.
1175
1176	The watcher might or might not be active while it is pending (for example,
1177	an expired non-repeating timer can be pending but no longer active). If it
1178	is stopped, it can be freely accessed (e.g. by calling C<ev_TYPE_set>),
1179	but it is still property of the event loop at this time, so cannot be
1180	moved, freed or reused. And if it is active the rules described in the
1181	previous item still apply.
1182
1183	It is also possible to feed an event on a watcher that is not active (e.g.
1184	via C<ev_feed_event>), in which case it becomes pending without being
1185	active.
1186
1187	=item stopped
1188
1189	A watcher can be stopped implicitly by libev (in which case it might still
1190	be pending), or explicitly by calling its C<ev_TYPE_stop> function. The
1191	latter will clear any pending state the watcher might be in, regardless
1192	of whether it was active or not, so stopping a watcher explicitly before
1193	freeing it is often a good idea.
1194
1195	While stopped (and not pending) the watcher is essentially in the
1196	initialised state, that is it can be reused, moved, modified in any way
1197	you wish.
1198
1199	=back
1200
1201	=head2 GENERIC WATCHER FUNCTIONS	1203	=head2 GENERIC WATCHER FUNCTIONS
1202		1204
1203	=over 4	1205	=over 4
1204		1206
1205	=item C<ev_init> (ev_TYPE *watcher, callback)	1207	=item C<ev_init> (ev_TYPE *watcher, callback)
…		…
1346		1348
1347	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related	1349	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
1348	functions that do not need a watcher.	1350	functions that do not need a watcher.
1349		1351
1350	=back	1352	=back
1351
1352		1353
1353	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	1354	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
1354		1355
1355	Each watcher has, by default, a member C<void *data> that you can change	1356	Each watcher has, by default, a member C<void *data> that you can change
1356	and read at any time: libev will completely ignore it. This can be used	1357	and read at any time: libev will completely ignore it. This can be used
…		…
1412	t2_cb (EV_P_ ev_timer *w, int revents)	1413	t2_cb (EV_P_ ev_timer *w, int revents)
1413	{	1414	{
1414	struct my_biggy big = (struct my_biggy *)	1415	struct my_biggy big = (struct my_biggy *)
1415	(((char *)w) - offsetof (struct my_biggy, t2));	1416	(((char *)w) - offsetof (struct my_biggy, t2));
1416	}	1417	}
		1418
		1419	=head2 WATCHER STATES
		1420
		1421	There are various watcher states mentioned throughout this manual -
		1422	active, pending and so on. In this section these states and the rules to
		1423	transition between them will be described in more detail - and while these
		1424	rules might look complicated, they usually do "the right thing".
		1425
		1426	=over 4
		1427
		1428	=item initialiased
		1429
		1430	Before a watcher can be registered with the event looop it has to be
		1431	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
		1432	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
		1433
		1434	In this state it is simply some block of memory that is suitable for use
		1435	in an event loop. It can be moved around, freed, reused etc. at will.
		1436
		1437	=item started/running/active
		1438
		1439	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
		1440	property of the event loop, and is actively waiting for events. While in
		1441	this state it cannot be accessed (except in a few documented ways), moved,
		1442	freed or anything else - the only legal thing is to keep a pointer to it,
		1443	and call libev functions on it that are documented to work on active watchers.
		1444
		1445	=item pending
		1446
		1447	If a watcher is active and libev determines that an event it is interested
		1448	in has occurred (such as a timer expiring), it will become pending. It will
		1449	stay in this pending state until either it is stopped or its callback is
		1450	about to be invoked, so it is not normally pending inside the watcher
		1451	callback.
		1452
		1453	The watcher might or might not be active while it is pending (for example,
		1454	an expired non-repeating timer can be pending but no longer active). If it
		1455	is stopped, it can be freely accessed (e.g. by calling C<ev_TYPE_set>),
		1456	but it is still property of the event loop at this time, so cannot be
		1457	moved, freed or reused. And if it is active the rules described in the
		1458	previous item still apply.
		1459
		1460	It is also possible to feed an event on a watcher that is not active (e.g.
		1461	via C<ev_feed_event>), in which case it becomes pending without being
		1462	active.
		1463
		1464	=item stopped
		1465
		1466	A watcher can be stopped implicitly by libev (in which case it might still
		1467	be pending), or explicitly by calling its C<ev_TYPE_stop> function. The
		1468	latter will clear any pending state the watcher might be in, regardless
		1469	of whether it was active or not, so stopping a watcher explicitly before
		1470	freeing it is often a good idea.
		1471
		1472	While stopped (and not pending) the watcher is essentially in the
		1473	initialised state, that is it can be reused, moved, modified in any way
		1474	you wish.
		1475
		1476	=back
1417		1477
1418	=head2 WATCHER PRIORITY MODELS	1478	=head2 WATCHER PRIORITY MODELS
1419		1479
1420	Many event loops support I<watcher priorities>, which are usually small	1480	Many event loops support I<watcher priorities>, which are usually small
1421	integers that influence the ordering of event callback invocation	1481	integers that influence the ordering of event callback invocation
…		…
2240		2300
2241	=head2 C<ev_signal> - signal me when a signal gets signalled!	2301	=head2 C<ev_signal> - signal me when a signal gets signalled!
2242		2302
2243	Signal watchers will trigger an event when the process receives a specific	2303	Signal watchers will trigger an event when the process receives a specific
2244	signal one or more times. Even though signals are very asynchronous, libev	2304	signal one or more times. Even though signals are very asynchronous, libev
2245	will try it's best to deliver signals synchronously, i.e. as part of the	2305	will try its best to deliver signals synchronously, i.e. as part of the
2246	normal event processing, like any other event.	2306	normal event processing, like any other event.
2247		2307
2248	If you want signals to be delivered truly asynchronously, just use	2308	If you want signals to be delivered truly asynchronously, just use
2249	C<sigaction> as you would do without libev and forget about sharing	2309	C<sigaction> as you would do without libev and forget about sharing
2250	the signal. You can even use C<ev_async> from a signal handler to	2310	the signal. You can even use C<ev_async> from a signal handler to
…		…
2292	I<has> to modify the signal mask, at least temporarily.	2352	I<has> to modify the signal mask, at least temporarily.
2293		2353
2294	So I can't stress this enough: I<If you do not reset your signal mask when	2354	So I can't stress this enough: I<If you do not reset your signal mask when
2295	you expect it to be empty, you have a race condition in your code>. This	2355	you expect it to be empty, you have a race condition in your code>. This
2296	is not a libev-specific thing, this is true for most event libraries.	2356	is not a libev-specific thing, this is true for most event libraries.
		2357
		2358	=head3 The special problem of threads signal handling
		2359
		2360	POSIX threads has problematic signal handling semantics, specifically,
		2361	a lot of functionality (sigfd, sigwait etc.) only really works if all
		2362	threads in a process block signals, which is hard to achieve.
		2363
		2364	When you want to use sigwait (or mix libev signal handling with your own
		2365	for the same signals), you can tackle this problem by globally blocking
		2366	all signals before creating any threads (or creating them with a fully set
		2367	sigprocmask) and also specifying the C<EVFLAG_NOSIGMASK> when creating
		2368	loops. Then designate one thread as "signal receiver thread" which handles
		2369	these signals. You can pass on any signals that libev might be interested
		2370	in by calling C<ev_feed_signal>.
2297		2371
2298	=head3 Watcher-Specific Functions and Data Members	2372	=head3 Watcher-Specific Functions and Data Members
2299		2373
2300	=over 4	2374	=over 4
2301		2375
…		…
3075	disadvantage of having to use multiple event loops (which do not support	3149	disadvantage of having to use multiple event loops (which do not support
3076	signal watchers).	3150	signal watchers).
3077		3151
3078	When this is not possible, or you want to use the default loop for	3152	When this is not possible, or you want to use the default loop for
3079	other reasons, then in the process that wants to start "fresh", call	3153	other reasons, then in the process that wants to start "fresh", call
3080	C<ev_default_destroy ()> followed by C<ev_default_loop (...)>. Destroying	3154	C<ev_loop_destroy (EV_DEFAULT)> followed by C<ev_default_loop (...)>.
3081	the default loop will "orphan" (not stop) all registered watchers, so you	3155	Destroying the default loop will "orphan" (not stop) all registered
3082	have to be careful not to execute code that modifies those watchers. Note	3156	watchers, so you have to be careful not to execute code that modifies
3083	also that in that case, you have to re-register any signal watchers.	3157	those watchers. Note also that in that case, you have to re-register any
		3158	signal watchers.
3084		3159
3085	=head3 Watcher-Specific Functions and Data Members	3160	=head3 Watcher-Specific Functions and Data Members
3086		3161
3087	=over 4	3162	=over 4
3088		3163
3089	=item ev_fork_init (ev_signal *, callback)	3164	=item ev_fork_init (ev_fork *, callback)
3090		3165
3091	Initialises and configures the fork watcher - it has no parameters of any	3166	Initialises and configures the fork watcher - it has no parameters of any
3092	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	3167	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
3093	believe me.	3168	really.
3094		3169
3095	=back	3170	=back
		3171
		3172
		3173	=head2 C<ev_cleanup> - even the best things end
		3174
		3175	Cleanup watchers are called just before the event loop is being destroyed
		3176	by a call to C<ev_loop_destroy>.
		3177
		3178	While there is no guarantee that the event loop gets destroyed, cleanup
		3179	watchers provide a convenient method to install cleanup hooks for your
		3180	program, worker threads and so on - you just to make sure to destroy the
		3181	loop when you want them to be invoked.
		3182
		3183	Cleanup watchers are invoked in the same way as any other watcher. Unlike
		3184	all other watchers, they do not keep a reference to the event loop (which
		3185	makes a lot of sense if you think about it). Like all other watchers, you
		3186	can call libev functions in the callback, except C<ev_cleanup_start>.
		3187
		3188	=head3 Watcher-Specific Functions and Data Members
		3189
		3190	=over 4
		3191
		3192	=item ev_cleanup_init (ev_cleanup *, callback)
		3193
		3194	Initialises and configures the cleanup watcher - it has no parameters of
		3195	any kind. There is a C<ev_cleanup_set> macro, but using it is utterly
		3196	pointless, I assure you.
		3197
		3198	=back
		3199
		3200	Example: Register an atexit handler to destroy the default loop, so any
		3201	cleanup functions are called.
		3202
		3203	static void
		3204	program_exits (void)
		3205	{
		3206	ev_loop_destroy (EV_DEFAULT_UC);
		3207	}
		3208
		3209	...
		3210	atexit (program_exits);
3096		3211
3097		3212
3098	=head2 C<ev_async> - how to wake up an event loop	3213	=head2 C<ev_async> - how to wake up an event loop
3099		3214
3100	In general, you cannot use an C<ev_run> from multiple threads or other	3215	In general, you cannot use an C<ev_run> from multiple threads or other
…		…
3107	it by calling C<ev_async_send>, which is thread- and signal safe.	3222	it by calling C<ev_async_send>, which is thread- and signal safe.
3108		3223
3109	This functionality is very similar to C<ev_signal> watchers, as signals,	3224	This functionality is very similar to C<ev_signal> watchers, as signals,
3110	too, are asynchronous in nature, and signals, too, will be compressed	3225	too, are asynchronous in nature, and signals, too, will be compressed
3111	(i.e. the number of callback invocations may be less than the number of	3226	(i.e. the number of callback invocations may be less than the number of
3112	C<ev_async_sent> calls).	3227	C<ev_async_sent> calls). In fact, you could use signal watchers as a kind
		3228	of "global async watchers" by using a watcher on an otherwise unused
		3229	signal, and C<ev_feed_signal> to signal this watcher from another thread,
		3230	even without knowing which loop owns the signal.
3113		3231
3114	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not	3232	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not
3115	just the default loop.	3233	just the default loop.
3116		3234
3117	=head3 Queueing	3235	=head3 Queueing
…		…
3293	Feed an event on the given fd, as if a file descriptor backend detected	3411	Feed an event on the given fd, as if a file descriptor backend detected
3294	the given events it.	3412	the given events it.
3295		3413
3296	=item ev_feed_signal_event (loop, int signum)	3414	=item ev_feed_signal_event (loop, int signum)
3297		3415
3298	Feed an event as if the given signal occurred (C<loop> must be the default	3416	Feed an event as if the given signal occurred. See also C<ev_feed_signal>,
3299	loop!).	3417	which is async-safe.
		3418
		3419	=back
		3420
		3421
		3422	=head1 COMMON OR USEFUL IDIOMS (OR BOTH)
		3423
		3424	This section explains some common idioms that are not immediately
		3425	obvious. Note that examples are sprinkled over the whole manual, and this
		3426	section only contains stuff that wouldn't fit anywhere else.
		3427
		3428	=over 4
		3429
		3430	=item Model/nested event loop invocations and exit conditions.
		3431
		3432	Often (especially in GUI toolkits) there are places where you have
		3433	I<modal> interaction, which is most easily implemented by recursively
		3434	invoking C<ev_run>.
		3435
		3436	This brings the problem of exiting - a callback might want to finish the
		3437	main C<ev_run> call, but not the nested one (e.g. user clicked "Quit", but
		3438	a modal "Are you sure?" dialog is still waiting), or just the nested one
		3439	and not the main one (e.g. user clocked "Ok" in a modal dialog), or some
		3440	other combination: In these cases, C<ev_break> will not work alone.
		3441
		3442	The solution is to maintain "break this loop" variable for each C<ev_run>
		3443	invocation, and use a loop around C<ev_run> until the condition is
		3444	triggered, using C<EVRUN_ONCE>:
		3445
		3446	// main loop
		3447	int exit_main_loop = 0;
		3448
		3449	while (!exit_main_loop)
		3450	ev_run (EV_DEFAULT_ EVRUN_ONCE);
		3451
		3452	// in a model watcher
		3453	int exit_nested_loop = 0;
		3454
		3455	while (!exit_nested_loop)
		3456	ev_run (EV_A_ EVRUN_ONCE);
		3457
		3458	To exit from any of these loops, just set the corresponding exit variable:
		3459
		3460	// exit modal loop
		3461	exit_nested_loop = 1;
		3462
		3463	// exit main program, after modal loop is finished
		3464	exit_main_loop = 1;
		3465
		3466	// exit both
		3467	exit_main_loop = exit_nested_loop = 1;
3300		3468
3301	=back	3469	=back
3302		3470
3303		3471
3304	=head1 LIBEVENT EMULATION	3472	=head1 LIBEVENT EMULATION
3305		3473
3306	Libev offers a compatibility emulation layer for libevent. It cannot	3474	Libev offers a compatibility emulation layer for libevent. It cannot
3307	emulate the internals of libevent, so here are some usage hints:	3475	emulate the internals of libevent, so here are some usage hints:
3308		3476
3309	=over 4	3477	=over 4
		3478
		3479	=item * Only the libevent-1.4.1-beta API is being emulated.
		3480
		3481	This was the newest libevent version available when libev was implemented,
		3482	and is still mostly unchanged in 2010.
3310		3483
3311	=item * Use it by including <event.h>, as usual.	3484	=item * Use it by including <event.h>, as usual.
3312		3485
3313	=item * The following members are fully supported: ev_base, ev_callback,	3486	=item * The following members are fully supported: ev_base, ev_callback,
3314	ev_arg, ev_fd, ev_res, ev_events.	3487	ev_arg, ev_fd, ev_res, ev_events.
…		…
3320	=item * Priorities are not currently supported. Initialising priorities	3493	=item * Priorities are not currently supported. Initialising priorities
3321	will fail and all watchers will have the same priority, even though there	3494	will fail and all watchers will have the same priority, even though there
3322	is an ev_pri field.	3495	is an ev_pri field.
3323		3496
3324	=item * In libevent, the last base created gets the signals, in libev, the	3497	=item * In libevent, the last base created gets the signals, in libev, the
3325	first base created (== the default loop) gets the signals.	3498	base that registered the signal gets the signals.
3326		3499
3327	=item * Other members are not supported.	3500	=item * Other members are not supported.
3328		3501
3329	=item * The libev emulation is I<not> ABI compatible to libevent, you need	3502	=item * The libev emulation is I<not> ABI compatible to libevent, you need
3330	to use the libev header file and library.	3503	to use the libev header file and library.
…		…
3349	Care has been taken to keep the overhead low. The only data member the C++	3522	Care has been taken to keep the overhead low. The only data member the C++
3350	classes add (compared to plain C-style watchers) is the event loop pointer	3523	classes add (compared to plain C-style watchers) is the event loop pointer
3351	that the watcher is associated with (or no additional members at all if	3524	that the watcher is associated with (or no additional members at all if
3352	you disable C<EV_MULTIPLICITY> when embedding libev).	3525	you disable C<EV_MULTIPLICITY> when embedding libev).
3353		3526
3354	Currently, functions, and static and non-static member functions can be	3527	Currently, functions, static and non-static member functions and classes
3355	used as callbacks. Other types should be easy to add as long as they only	3528	with C<operator ()> can be used as callbacks. Other types should be easy
3356	need one additional pointer for context. If you need support for other	3529	to add as long as they only need one additional pointer for context. If
3357	types of functors please contact the author (preferably after implementing	3530	you need support for other types of functors please contact the author
3358	it).	3531	(preferably after implementing it).
3359		3532
3360	Here is a list of things available in the C<ev> namespace:	3533	Here is a list of things available in the C<ev> namespace:
3361		3534
3362	=over 4	3535	=over 4
3363		3536
…		…
4707	structure (guaranteed by POSIX but not by ISO C for example), but it also	4880	structure (guaranteed by POSIX but not by ISO C for example), but it also
4708	assumes that the same (machine) code can be used to call any watcher	4881	assumes that the same (machine) code can be used to call any watcher
4709	callback: The watcher callbacks have different type signatures, but libev	4882	callback: The watcher callbacks have different type signatures, but libev
4710	calls them using an C<ev_watcher *> internally.	4883	calls them using an C<ev_watcher *> internally.
4711		4884
		4885	=item pointer accesses must be thread-atomic
		4886
		4887	Accessing a pointer value must be atomic, it must both be readable and
		4888	writable in one piece - this is the case on all current architectures.
		4889
4712	=item C<sig_atomic_t volatile> must be thread-atomic as well	4890	=item C<sig_atomic_t volatile> must be thread-atomic as well
4713		4891
4714	The type C<sig_atomic_t volatile> (or whatever is defined as	4892	The type C<sig_atomic_t volatile> (or whatever is defined as
4715	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different	4893	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different
4716	threads. This is not part of the specification for C<sig_atomic_t>, but is	4894	threads. This is not part of the specification for C<sig_atomic_t>, but is
…		…
4822	=back	5000	=back
4823		5001
4824		5002
4825	=head1 PORTING FROM LIBEV 3.X TO 4.X	5003	=head1 PORTING FROM LIBEV 3.X TO 4.X
4826		5004
4827	The major version 4 introduced some minor incompatible changes to the API.	5005	The major version 4 introduced some incompatible changes to the API.
4828		5006
4829	At the moment, the C<ev.h> header file tries to implement superficial	5007	At the moment, the C<ev.h> header file provides compatibility definitions
4830	compatibility, so most programs should still compile. Those might be	5008	for all changes, so most programs should still compile. The compatibility
4831	removed in later versions of libev, so better update early than late.	5009	layer might be removed in later versions of libev, so better update to the
		5010	new API early than late.
4832		5011
4833	=over 4	5012	=over 4
		5013
		5014	=item C<EV_COMPAT3> backwards compatibility mechanism
		5015
		5016	The backward compatibility mechanism can be controlled by
		5017	C<EV_COMPAT3>. See L<PREPROCESSOR SYMBOLS/MACROS> in the L<EMBEDDING>
		5018	section.
		5019
		5020	=item C<ev_default_destroy> and C<ev_default_fork> have been removed
		5021
		5022	These calls can be replaced easily by their C<ev_loop_xxx> counterparts:
		5023
		5024	ev_loop_destroy (EV_DEFAULT_UC);
		5025	ev_loop_fork (EV_DEFAULT);
4834		5026
4835	=item function/symbol renames	5027	=item function/symbol renames
4836		5028
4837	A number of functions and symbols have been renamed:	5029	A number of functions and symbols have been renamed:
4838		5030
…		…
4857	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme	5049	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme
4858	as all other watcher types. Note that C<ev_loop_fork> is still called	5050	as all other watcher types. Note that C<ev_loop_fork> is still called
4859	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>	5051	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>
4860	typedef.	5052	typedef.
4861		5053
4862	=item C<EV_COMPAT3> backwards compatibility mechanism
4863
4864	The backward compatibility mechanism can be controlled by
4865	C<EV_COMPAT3>. See L<PREPROCESSOR SYMBOLS/MACROS> in the L<EMBEDDING>
4866	section.
4867
4868	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>	5054	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>
4869		5055
4870	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different	5056	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different
4871	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile	5057	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile
4872	and work, but the library code will of course be larger.	5058	and work, but the library code will of course be larger.
…		…
4946		5132
4947	=back	5133	=back
4948		5134
4949	=head1 AUTHOR	5135	=head1 AUTHOR
4950		5136
4951	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael Magnusson.	5137	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael
		5138	Magnusson and Emanuele Giaquinta.
4952		5139

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing libev/ev.pod (file contents): Revision 1.321 by sf-exg, Fri Oct 22 10:50:24 2010 UTC vs. Revision 1.349 by root, Mon Jan 10 01:58:55 2011 UTC

Diff Legend

Comparing libev/ev.pod (file contents):
Revision 1.321 by sf-exg, Fri Oct 22 10:50:24 2010 UTC vs.
Revision 1.349 by root, Mon Jan 10 01:58:55 2011 UTC