ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.238 by root, Sat Apr 18 12:10:41 2009 UTC vs.
Revision 1.327 by root, Sun Oct 24 20:05:43 2010 UTC

…		…
26	puts ("stdin ready");	26	puts ("stdin ready");
27	// for one-shot events, one must manually stop the watcher	27	// for one-shot events, one must manually stop the watcher
28	// with its corresponding stop function.	28	// with its corresponding stop function.
29	ev_io_stop (EV_A_ w);	29	ev_io_stop (EV_A_ w);
30		30
31	// this causes all nested ev_loop's to stop iterating	31	// this causes all nested ev_run's to stop iterating
32	ev_unloop (EV_A_ EVUNLOOP_ALL);	32	ev_break (EV_A_ EVBREAK_ALL);
33	}	33	}
34		34
35	// another callback, this time for a time-out	35	// another callback, this time for a time-out
36	static void	36	static void
37	timeout_cb (EV_P_ ev_timer *w, int revents)	37	timeout_cb (EV_P_ ev_timer *w, int revents)
38	{	38	{
39	puts ("timeout");	39	puts ("timeout");
40	// this causes the innermost ev_loop to stop iterating	40	// this causes the innermost ev_run to stop iterating
41	ev_unloop (EV_A_ EVUNLOOP_ONE);	41	ev_break (EV_A_ EVBREAK_ONE);
42	}	42	}
43		43
44	int	44	int
45	main (void)	45	main (void)
46	{	46	{
47	// use the default event loop unless you have special needs	47	// use the default event loop unless you have special needs
48	struct ev_loop *loop = ev_default_loop (0);	48	struct ev_loop *loop = EV_DEFAULT;
49		49
50	// initialise an io watcher, then start it	50	// initialise an io watcher, then start it
51	// this one will watch for stdin to become readable	51	// this one will watch for stdin to become readable
52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
53	ev_io_start (loop, &stdin_watcher);	53	ev_io_start (loop, &stdin_watcher);
…		…
56	// simple non-repeating 5.5 second timeout	56	// simple non-repeating 5.5 second timeout
57	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	57	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
58	ev_timer_start (loop, &timeout_watcher);	58	ev_timer_start (loop, &timeout_watcher);
59		59
60	// now wait for events to arrive	60	// now wait for events to arrive
61	ev_loop (loop, 0);	61	ev_run (loop, 0);
62		62
63	// unloop was called, so exit	63	// unloop was called, so exit
64	return 0;	64	return 0;
65	}	65	}
66		66
…		…
75	While this document tries to be as complete as possible in documenting	75	While this document tries to be as complete as possible in documenting
76	libev, its usage and the rationale behind its design, it is not a tutorial	76	libev, its usage and the rationale behind its design, it is not a tutorial
77	on event-based programming, nor will it introduce event-based programming	77	on event-based programming, nor will it introduce event-based programming
78	with libev.	78	with libev.
79		79
80	Familarity with event based programming techniques in general is assumed	80	Familiarity with event based programming techniques in general is assumed
81	throughout this document.	81	throughout this document.
82		82
83	=head1 ABOUT LIBEV	83	=head1 ABOUT LIBEV
84		84
85	Libev is an event loop: you register interest in certain events (such as a	85	Libev is an event loop: you register interest in certain events (such as a
…		…
98	=head2 FEATURES	98	=head2 FEATURES
99		99
100	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	100	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
101	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	101	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
102	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	102	for file descriptor events (C<ev_io>), the Linux C<inotify> interface
103	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers	103	(for C<ev_stat>), Linux eventfd/signalfd (for faster and cleaner
104	with customised rescheduling (C<ev_periodic>), synchronous signals	104	inter-thread wakeup (C<ev_async>)/signal handling (C<ev_signal>)) relative
105	(C<ev_signal>), process status change events (C<ev_child>), and event	105	timers (C<ev_timer>), absolute timers with customised rescheduling
106	watchers dealing with the event loop mechanism itself (C<ev_idle>,	106	(C<ev_periodic>), synchronous signals (C<ev_signal>), process status
107	C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as	107	change events (C<ev_child>), and event watchers dealing with the event
108	file watchers (C<ev_stat>) and even limited support for fork events	108	loop mechanism itself (C<ev_idle>, C<ev_embed>, C<ev_prepare> and
109	(C<ev_fork>).	109	C<ev_check> watchers) as well as file watchers (C<ev_stat>) and even
		110	limited support for fork events (C<ev_fork>).
110		111
111	It also is quite fast (see this	112	It also is quite fast (see this
112	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent	113	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
113	for example).	114	for example).
114		115
…		…
117	Libev is very configurable. In this manual the default (and most common)	118	Libev is very configurable. In this manual the default (and most common)
118	configuration will be described, which supports multiple event loops. For	119	configuration will be described, which supports multiple event loops. For
119	more info about various configuration options please have a look at	120	more info about various configuration options please have a look at
120	B<EMBED> section in this manual. If libev was configured without support	121	B<EMBED> section in this manual. If libev was configured without support
121	for multiple event loops, then all functions taking an initial argument of	122	for multiple event loops, then all functions taking an initial argument of
122	name C<loop> (which is always of type C<ev_loop *>) will not have	123	name C<loop> (which is always of type C<struct ev_loop *>) will not have
123	this argument.	124	this argument.
124		125
125	=head2 TIME REPRESENTATION	126	=head2 TIME REPRESENTATION
126		127
127	Libev represents time as a single floating point number, representing	128	Libev represents time as a single floating point number, representing
128	the (fractional) number of seconds since the (POSIX) epoch (somewhere	129	the (fractional) number of seconds since the (POSIX) epoch (in practice
129	near the beginning of 1970, details are complicated, don't ask). This	130	somewhere near the beginning of 1970, details are complicated, don't
130	type is called C<ev_tstamp>, which is what you should use too. It usually	131	ask). This type is called C<ev_tstamp>, which is what you should use
131	aliases to the C<double> type in C. When you need to do any calculations	132	too. It usually aliases to the C<double> type in C. When you need to do
132	on it, you should treat it as some floating point value. Unlike the name	133	any calculations on it, you should treat it as some floating point value.
		134
133	component C<stamp> might indicate, it is also used for time differences	135	Unlike the name component C<stamp> might indicate, it is also used for
134	throughout libev.	136	time differences (e.g. delays) throughout libev.
135		137
136	=head1 ERROR HANDLING	138	=head1 ERROR HANDLING
137		139
138	Libev knows three classes of errors: operating system errors, usage errors	140	Libev knows three classes of errors: operating system errors, usage errors
139	and internal errors (bugs).	141	and internal errors (bugs).
…		…
163		165
164	=item ev_tstamp ev_time ()	166	=item ev_tstamp ev_time ()
165		167
166	Returns the current time as libev would use it. Please note that the	168	Returns the current time as libev would use it. Please note that the
167	C<ev_now> function is usually faster and also often returns the timestamp	169	C<ev_now> function is usually faster and also often returns the timestamp
168	you actually want to know.	170	you actually want to know. Also interesting is the combination of
		171	C<ev_update_now> and C<ev_now>.
169		172
170	=item ev_sleep (ev_tstamp interval)	173	=item ev_sleep (ev_tstamp interval)
171		174
172	Sleep for the given interval: The current thread will be blocked until	175	Sleep for the given interval: The current thread will be blocked until
173	either it is interrupted or the given time interval has passed. Basically	176	either it is interrupted or the given time interval has passed. Basically
…		…
190	as this indicates an incompatible change. Minor versions are usually	193	as this indicates an incompatible change. Minor versions are usually
191	compatible to older versions, so a larger minor version alone is usually	194	compatible to older versions, so a larger minor version alone is usually
192	not a problem.	195	not a problem.
193		196
194	Example: Make sure we haven't accidentally been linked against the wrong	197	Example: Make sure we haven't accidentally been linked against the wrong
195	version.	198	version (note, however, that this will not detect other ABI mismatches,
		199	such as LFS or reentrancy).
196		200
197	assert (("libev version mismatch",	201	assert (("libev version mismatch",
198	ev_version_major () == EV_VERSION_MAJOR	202	ev_version_major () == EV_VERSION_MAJOR
199	&& ev_version_minor () >= EV_VERSION_MINOR));	203	&& ev_version_minor () >= EV_VERSION_MINOR));
200		204
…		…
211	assert (("sorry, no epoll, no sex",	215	assert (("sorry, no epoll, no sex",
212	ev_supported_backends () & EVBACKEND_EPOLL));	216	ev_supported_backends () & EVBACKEND_EPOLL));
213		217
214	=item unsigned int ev_recommended_backends ()	218	=item unsigned int ev_recommended_backends ()
215		219
216	Return the set of all backends compiled into this binary of libev and also	220	Return the set of all backends compiled into this binary of libev and
217	recommended for this platform. This set is often smaller than the one	221	also recommended for this platform, meaning it will work for most file
		222	descriptor types. This set is often smaller than the one returned by
218	returned by C<ev_supported_backends>, as for example kqueue is broken on	223	C<ev_supported_backends>, as for example kqueue is broken on most BSDs
219	most BSDs and will not be auto-detected unless you explicitly request it	224	and will not be auto-detected unless you explicitly request it (assuming
220	(assuming you know what you are doing). This is the set of backends that	225	you know what you are doing). This is the set of backends that libev will
221	libev will probe for if you specify no backends explicitly.	226	probe for if you specify no backends explicitly.
222		227
223	=item unsigned int ev_embeddable_backends ()	228	=item unsigned int ev_embeddable_backends ()
224		229
225	Returns the set of backends that are embeddable in other event loops. This	230	Returns the set of backends that are embeddable in other event loops. This
226	is the theoretical, all-platform, value. To find which backends	231	value is platform-specific but can include backends not available on the
227	might be supported on the current system, you would need to look at	232	current system. To find which embeddable backends might be supported on
228	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for	233	the current system, you would need to look at C<ev_embeddable_backends ()
229	recommended ones.	234	& ev_supported_backends ()>, likewise for recommended ones.
230		235
231	See the description of C<ev_embed> watchers for more info.	236	See the description of C<ev_embed> watchers for more info.
232		237
233	=item ev_set_allocator (void *(*cb)(void *ptr, long size)) [NOT REENTRANT]	238	=item ev_set_allocator (void *(*cb)(void *ptr, long size)) [NOT REENTRANT]
234		239
…		…
288	...	293	...
289	ev_set_syserr_cb (fatal_error);	294	ev_set_syserr_cb (fatal_error);
290		295
291	=back	296	=back
292		297
293	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	298	=head1 FUNCTIONS CONTROLLING EVENT LOOPS
294		299
295	An event loop is described by a C<struct ev_loop *> (the C<struct>	300	An event loop is described by a C<struct ev_loop *> (the C<struct> is
296	is I<not> optional in this case, as there is also an C<ev_loop>	301	I<not> optional in this case unless libev 3 compatibility is disabled, as
297	I<function>).	302	libev 3 had an C<ev_loop> function colliding with the struct name).
298		303
299	The library knows two types of such loops, the I<default> loop, which	304	The library knows two types of such loops, the I<default> loop, which
300	supports signals and child events, and dynamically created loops which do	305	supports signals and child events, and dynamically created event loops
301	not.	306	which do not.
302		307
303	=over 4	308	=over 4
304		309
305	=item struct ev_loop *ev_default_loop (unsigned int flags)	310	=item struct ev_loop *ev_default_loop (unsigned int flags)
306		311
307	This will initialise the default event loop if it hasn't been initialised	312	This returns the "default" event loop object, which is what you should
308	yet and return it. If the default loop could not be initialised, returns	313	normally use when you just need "the event loop". Event loop objects and
309	false. If it already was initialised it simply returns it (and ignores the	314	the C<flags> parameter are described in more detail in the entry for
310	flags. If that is troubling you, check C<ev_backend ()> afterwards).	315	C<ev_loop_new>.
		316
		317	If the default loop is already initialised then this function simply
		318	returns it (and ignores the flags. If that is troubling you, check
		319	C<ev_backend ()> afterwards). Otherwise it will create it with the given
		320	flags, which should almost always be C<0>, unless the caller is also the
		321	one calling C<ev_run> or otherwise qualifies as "the main program".
311		322
312	If you don't know what event loop to use, use the one returned from this	323	If you don't know what event loop to use, use the one returned from this
313	function.	324	function (or via the C<EV_DEFAULT> macro).
314		325
315	Note that this function is I<not> thread-safe, so if you want to use it	326	Note that this function is I<not> thread-safe, so if you want to use it
316	from multiple threads, you have to lock (note also that this is unlikely,	327	from multiple threads, you have to employ some kind of mutex (note also
317	as loops cannot be shared easily between threads anyway).	328	that this case is unlikely, as loops cannot be shared easily between
		329	threads anyway).
318		330
319	The default loop is the only loop that can handle C<ev_signal> and	331	The default loop is the only loop that can handle C<ev_child> watchers,
320	C<ev_child> watchers, and to do this, it always registers a handler	332	and to do this, it always registers a handler for C<SIGCHLD>. If this is
321	for C<SIGCHLD>. If this is a problem for your application you can either	333	a problem for your application you can either create a dynamic loop with
322	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you	334	C<ev_loop_new> which doesn't do that, or you can simply overwrite the
323	can simply overwrite the C<SIGCHLD> signal handler I<after> calling	335	C<SIGCHLD> signal handler I<after> calling C<ev_default_init>.
324	C<ev_default_init>.	336
		337	Example: This is the most typical usage.
		338
		339	if (!ev_default_loop (0))
		340	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		341
		342	Example: Restrict libev to the select and poll backends, and do not allow
		343	environment settings to be taken into account:
		344
		345	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
		346
		347	=item struct ev_loop *ev_loop_new (unsigned int flags)
		348
		349	This will create and initialise a new event loop object. If the loop
		350	could not be initialised, returns false.
		351
		352	Note that this function I<is> thread-safe, and one common way to use
		353	libev with threads is indeed to create one loop per thread, and using the
		354	default loop in the "main" or "initial" thread.
325		355
326	The flags argument can be used to specify special behaviour or specific	356	The flags argument can be used to specify special behaviour or specific
327	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	357	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
328		358
329	The following flags are supported:	359	The following flags are supported:
…		…
344	useful to try out specific backends to test their performance, or to work	374	useful to try out specific backends to test their performance, or to work
345	around bugs.	375	around bugs.
346		376
347	=item C<EVFLAG_FORKCHECK>	377	=item C<EVFLAG_FORKCHECK>
348		378
349	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after	379	Instead of calling C<ev_loop_fork> manually after a fork, you can also
350	a fork, you can also make libev check for a fork in each iteration by	380	make libev check for a fork in each iteration by enabling this flag.
351	enabling this flag.
352		381
353	This works by calling C<getpid ()> on every iteration of the loop,	382	This works by calling C<getpid ()> on every iteration of the loop,
354	and thus this might slow down your event loop if you do a lot of loop	383	and thus this might slow down your event loop if you do a lot of loop
355	iterations and little real work, but is usually not noticeable (on my	384	iterations and little real work, but is usually not noticeable (on my
356	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence	385	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence
…		…
362	flag.	391	flag.
363		392
364	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>	393	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>
365	environment variable.	394	environment variable.
366		395
		396	=item C<EVFLAG_NOINOTIFY>
		397
		398	When this flag is specified, then libev will not attempt to use the
		399	I<inotify> API for it's C<ev_stat> watchers. Apart from debugging and
		400	testing, this flag can be useful to conserve inotify file descriptors, as
		401	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.
		402
		403	=item C<EVFLAG_SIGNALFD>
		404
		405	When this flag is specified, then libev will attempt to use the
		406	I<signalfd> API for it's C<ev_signal> (and C<ev_child>) watchers. This API
		407	delivers signals synchronously, which makes it both faster and might make
		408	it possible to get the queued signal data. It can also simplify signal
		409	handling with threads, as long as you properly block signals in your
		410	threads that are not interested in handling them.
		411
		412	Signalfd will not be used by default as this changes your signal mask, and
		413	there are a lot of shoddy libraries and programs (glib's threadpool for
		414	example) that can't properly initialise their signal masks.
		415
367	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	416	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
368		417
369	This is your standard select(2) backend. Not I<completely> standard, as	418	This is your standard select(2) backend. Not I<completely> standard, as
370	libev tries to roll its own fd_set with no limits on the number of fds,	419	libev tries to roll its own fd_set with no limits on the number of fds,
371	but if that fails, expect a fairly low limit on the number of fds when	420	but if that fails, expect a fairly low limit on the number of fds when
…		…
394		443
395	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and	444	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and
396	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.	445	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.
397		446
398	=item C<EVBACKEND_EPOLL> (value 4, Linux)	447	=item C<EVBACKEND_EPOLL> (value 4, Linux)
		448
		449	Use the linux-specific epoll(7) interface (for both pre- and post-2.6.9
		450	kernels).
399		451
400	For few fds, this backend is a bit little slower than poll and select,	452	For few fds, this backend is a bit little slower than poll and select,
401	but it scales phenomenally better. While poll and select usually scale	453	but it scales phenomenally better. While poll and select usually scale
402	like O(total_fds) where n is the total number of fds (or the highest fd),	454	like O(total_fds) where n is the total number of fds (or the highest fd),
403	epoll scales either O(1) or O(active_fds).	455	epoll scales either O(1) or O(active_fds).
…		…
415	of course I<doesn't>, and epoll just loves to report events for totally	467	of course I<doesn't>, and epoll just loves to report events for totally
416	I<different> file descriptors (even already closed ones, so one cannot	468	I<different> file descriptors (even already closed ones, so one cannot
417	even remove them from the set) than registered in the set (especially	469	even remove them from the set) than registered in the set (especially
418	on SMP systems). Libev tries to counter these spurious notifications by	470	on SMP systems). Libev tries to counter these spurious notifications by
419	employing an additional generation counter and comparing that against the	471	employing an additional generation counter and comparing that against the
420	events to filter out spurious ones, recreating the set when required.	472	events to filter out spurious ones, recreating the set when required. Last
		473	not least, it also refuses to work with some file descriptors which work
		474	perfectly fine with C<select> (files, many character devices...).
421		475
422	While stopping, setting and starting an I/O watcher in the same iteration	476	While stopping, setting and starting an I/O watcher in the same iteration
423	will result in some caching, there is still a system call per such	477	will result in some caching, there is still a system call per such
424	incident (because the same I<file descriptor> could point to a different	478	incident (because the same I<file descriptor> could point to a different
425	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed	479	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed
…		…
518		572
519	It is definitely not recommended to use this flag.	573	It is definitely not recommended to use this flag.
520		574
521	=back	575	=back
522		576
523	If one or more of these are or'ed into the flags value, then only these	577	If one or more of the backend flags are or'ed into the flags value,
524	backends will be tried (in the reverse order as listed here). If none are	578	then only these backends will be tried (in the reverse order as listed
525	specified, all backends in C<ev_recommended_backends ()> will be tried.	579	here). If none are specified, all backends in C<ev_recommended_backends
526		580	()> will be tried.
527	Example: This is the most typical usage.
528
529	if (!ev_default_loop (0))
530	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
531
532	Example: Restrict libev to the select and poll backends, and do not allow
533	environment settings to be taken into account:
534
535	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
536
537	Example: Use whatever libev has to offer, but make sure that kqueue is
538	used if available (warning, breaks stuff, best use only with your own
539	private event loop and only if you know the OS supports your types of
540	fds):
541
542	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
543
544	=item struct ev_loop *ev_loop_new (unsigned int flags)
545
546	Similar to C<ev_default_loop>, but always creates a new event loop that is
547	always distinct from the default loop. Unlike the default loop, it cannot
548	handle signal and child watchers, and attempts to do so will be greeted by
549	undefined behaviour (or a failed assertion if assertions are enabled).
550
551	Note that this function I<is> thread-safe, and the recommended way to use
552	libev with threads is indeed to create one loop per thread, and using the
553	default loop in the "main" or "initial" thread.
554		581
555	Example: Try to create a event loop that uses epoll and nothing else.	582	Example: Try to create a event loop that uses epoll and nothing else.
556		583
557	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	584	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
558	if (!epoller)	585	if (!epoller)
559	fatal ("no epoll found here, maybe it hides under your chair");	586	fatal ("no epoll found here, maybe it hides under your chair");
560		587
		588	Example: Use whatever libev has to offer, but make sure that kqueue is
		589	used if available.
		590
		591	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_KQUEUE);
		592
561	=item ev_default_destroy ()	593	=item ev_loop_destroy (loop)
562		594
563	Destroys the default loop again (frees all memory and kernel state	595	Destroys an event loop object (frees all memory and kernel state
564	etc.). None of the active event watchers will be stopped in the normal	596	etc.). None of the active event watchers will be stopped in the normal
565	sense, so e.g. C<ev_is_active> might still return true. It is your	597	sense, so e.g. C<ev_is_active> might still return true. It is your
566	responsibility to either stop all watchers cleanly yourself I<before>	598	responsibility to either stop all watchers cleanly yourself I<before>
567	calling this function, or cope with the fact afterwards (which is usually	599	calling this function, or cope with the fact afterwards (which is usually
568	the easiest thing, you can just ignore the watchers and/or C<free ()> them	600	the easiest thing, you can just ignore the watchers and/or C<free ()> them
…		…
570		602
571	Note that certain global state, such as signal state (and installed signal	603	Note that certain global state, such as signal state (and installed signal
572	handlers), will not be freed by this function, and related watchers (such	604	handlers), will not be freed by this function, and related watchers (such
573	as signal and child watchers) would need to be stopped manually.	605	as signal and child watchers) would need to be stopped manually.
574		606
575	In general it is not advisable to call this function except in the	607	This function is normally used on loop objects allocated by
576	rare occasion where you really need to free e.g. the signal handling	608	C<ev_loop_new>, but it can also be used on the default loop returned by
		609	C<ev_default_loop>, in which case it is not thread-safe.
		610
		611	Note that it is not advisable to call this function on the default loop
		612	except in the rare occasion where you really need to free it's resources.
577	pipe fds. If you need dynamically allocated loops it is better to use	613	If you need dynamically allocated loops it is better to use C<ev_loop_new>
578	C<ev_loop_new> and C<ev_loop_destroy>).	614	and C<ev_loop_destroy>.
579		615
580	=item ev_loop_destroy (loop)	616	=item ev_loop_fork (loop)
581		617
582	Like C<ev_default_destroy>, but destroys an event loop created by an
583	earlier call to C<ev_loop_new>.
584
585	=item ev_default_fork ()
586
587	This function sets a flag that causes subsequent C<ev_loop> iterations	618	This function sets a flag that causes subsequent C<ev_run> iterations to
588	to reinitialise the kernel state for backends that have one. Despite the	619	reinitialise the kernel state for backends that have one. Despite the
589	name, you can call it anytime, but it makes most sense after forking, in	620	name, you can call it anytime, but it makes most sense after forking, in
590	the child process (or both child and parent, but that again makes little	621	the child process. You I<must> call it (or use C<EVFLAG_FORKCHECK>) in the
591	sense). You I<must> call it in the child before using any of the libev	622	child before resuming or calling C<ev_run>.
592	functions, and it will only take effect at the next C<ev_loop> iteration.	623
		624	Again, you I<have> to call it on I<any> loop that you want to re-use after
		625	a fork, I<even if you do not plan to use the loop in the parent>. This is
		626	because some kernel interfaces *cough* I<kqueue> *cough* do funny things
		627	during fork.
593		628
594	On the other hand, you only need to call this function in the child	629	On the other hand, you only need to call this function in the child
595	process if and only if you want to use the event library in the child. If	630	process if and only if you want to use the event loop in the child. If
596	you just fork+exec, you don't have to call it at all.	631	you just fork+exec or create a new loop in the child, you don't have to
		632	call it at all (in fact, C<epoll> is so badly broken that it makes a
		633	difference, but libev will usually detect this case on its own and do a
		634	costly reset of the backend).
597		635
598	The function itself is quite fast and it's usually not a problem to call	636	The function itself is quite fast and it's usually not a problem to call
599	it just in case after a fork. To make this easy, the function will fit in	637	it just in case after a fork.
600	quite nicely into a call to C<pthread_atfork>:
601		638
		639	Example: Automate calling C<ev_loop_fork> on the default loop when
		640	using pthreads.
		641
		642	static void
		643	post_fork_child (void)
		644	{
		645	ev_loop_fork (EV_DEFAULT);
		646	}
		647
		648	...
602	pthread_atfork (0, 0, ev_default_fork);	649	pthread_atfork (0, 0, post_fork_child);
603
604	=item ev_loop_fork (loop)
605
606	Like C<ev_default_fork>, but acts on an event loop created by
607	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
608	after fork that you want to re-use in the child, and how you do this is
609	entirely your own problem.
610		650
611	=item int ev_is_default_loop (loop)	651	=item int ev_is_default_loop (loop)
612		652
613	Returns true when the given loop is, in fact, the default loop, and false	653	Returns true when the given loop is, in fact, the default loop, and false
614	otherwise.	654	otherwise.
615		655
616	=item unsigned int ev_loop_count (loop)	656	=item unsigned int ev_iteration (loop)
617		657
618	Returns the count of loop iterations for the loop, which is identical to	658	Returns the current iteration count for the event loop, which is identical
619	the number of times libev did poll for new events. It starts at C<0> and	659	to the number of times libev did poll for new events. It starts at C<0>
620	happily wraps around with enough iterations.	660	and happily wraps around with enough iterations.
621		661
622	This value can sometimes be useful as a generation counter of sorts (it	662	This value can sometimes be useful as a generation counter of sorts (it
623	"ticks" the number of loop iterations), as it roughly corresponds with	663	"ticks" the number of loop iterations), as it roughly corresponds with
624	C<ev_prepare> and C<ev_check> calls.	664	C<ev_prepare> and C<ev_check> calls - and is incremented between the
		665	prepare and check phases.
		666
		667	=item unsigned int ev_depth (loop)
		668
		669	Returns the number of times C<ev_run> was entered minus the number of
		670	times C<ev_run> was exited, in other words, the recursion depth.
		671
		672	Outside C<ev_run>, this number is zero. In a callback, this number is
		673	C<1>, unless C<ev_run> was invoked recursively (or from another thread),
		674	in which case it is higher.
		675
		676	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread
		677	etc.), doesn't count as "exit" - consider this as a hint to avoid such
		678	ungentleman-like behaviour unless it's really convenient.
625		679
626	=item unsigned int ev_backend (loop)	680	=item unsigned int ev_backend (loop)
627		681
628	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	682	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
629	use.	683	use.
…		…
638		692
639	=item ev_now_update (loop)	693	=item ev_now_update (loop)
640		694
641	Establishes the current time by querying the kernel, updating the time	695	Establishes the current time by querying the kernel, updating the time
642	returned by C<ev_now ()> in the progress. This is a costly operation and	696	returned by C<ev_now ()> in the progress. This is a costly operation and
643	is usually done automatically within C<ev_loop ()>.	697	is usually done automatically within C<ev_run ()>.
644		698
645	This function is rarely useful, but when some event callback runs for a	699	This function is rarely useful, but when some event callback runs for a
646	very long time without entering the event loop, updating libev's idea of	700	very long time without entering the event loop, updating libev's idea of
647	the current time is a good idea.	701	the current time is a good idea.
648		702
…		…
650		704
651	=item ev_suspend (loop)	705	=item ev_suspend (loop)
652		706
653	=item ev_resume (loop)	707	=item ev_resume (loop)
654		708
655	These two functions suspend and resume a loop, for use when the loop is	709	These two functions suspend and resume an event loop, for use when the
656	not used for a while and timeouts should not be processed.	710	loop is not used for a while and timeouts should not be processed.
657		711
658	A typical use case would be an interactive program such as a game: When	712	A typical use case would be an interactive program such as a game: When
659	the user presses C<^Z> to suspend the game and resumes it an hour later it	713	the user presses C<^Z> to suspend the game and resumes it an hour later it
660	would be best to handle timeouts as if no time had actually passed while	714	would be best to handle timeouts as if no time had actually passed while
661	the program was suspended. This can be achieved by calling C<ev_suspend>	715	the program was suspended. This can be achieved by calling C<ev_suspend>
…		…
663	C<ev_resume> directly afterwards to resume timer processing.	717	C<ev_resume> directly afterwards to resume timer processing.
664		718
665	Effectively, all C<ev_timer> watchers will be delayed by the time spend	719	Effectively, all C<ev_timer> watchers will be delayed by the time spend
666	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers	720	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers
667	will be rescheduled (that is, they will lose any events that would have	721	will be rescheduled (that is, they will lose any events that would have
668	occured while suspended).	722	occurred while suspended).
669		723
670	After calling C<ev_suspend> you B<must not> call I<any> function on the	724	After calling C<ev_suspend> you B<must not> call I<any> function on the
671	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>	725	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>
672	without a previous call to C<ev_suspend>.	726	without a previous call to C<ev_suspend>.
673		727
674	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the	728	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the
675	event loop time (see C<ev_now_update>).	729	event loop time (see C<ev_now_update>).
676		730
677	=item ev_loop (loop, int flags)	731	=item ev_run (loop, int flags)
678		732
679	Finally, this is it, the event handler. This function usually is called	733	Finally, this is it, the event handler. This function usually is called
680	after you initialised all your watchers and you want to start handling	734	after you have initialised all your watchers and you want to start
681	events.	735	handling events. It will ask the operating system for any new events, call
		736	the watcher callbacks, an then repeat the whole process indefinitely: This
		737	is why event loops are called I<loops>.
682		738
683	If the flags argument is specified as C<0>, it will not return until	739	If the flags argument is specified as C<0>, it will keep handling events
684	either no event watchers are active anymore or C<ev_unloop> was called.	740	until either no event watchers are active anymore or C<ev_break> was
		741	called.
685		742
686	Please note that an explicit C<ev_unloop> is usually better than	743	Please note that an explicit C<ev_break> is usually better than
687	relying on all watchers to be stopped when deciding when a program has	744	relying on all watchers to be stopped when deciding when a program has
688	finished (especially in interactive programs), but having a program	745	finished (especially in interactive programs), but having a program
689	that automatically loops as long as it has to and no longer by virtue	746	that automatically loops as long as it has to and no longer by virtue
690	of relying on its watchers stopping correctly, that is truly a thing of	747	of relying on its watchers stopping correctly, that is truly a thing of
691	beauty.	748	beauty.
692		749
693	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle	750	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle
694	those events and any already outstanding ones, but will not block your	751	those events and any already outstanding ones, but will not wait and
695	process in case there are no events and will return after one iteration of	752	block your process in case there are no events and will return after one
696	the loop.	753	iteration of the loop. This is sometimes useful to poll and handle new
		754	events while doing lengthy calculations, to keep the program responsive.
697		755
698	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if	756	A flags value of C<EVRUN_ONCE> will look for new events (waiting if
699	necessary) and will handle those and any already outstanding ones. It	757	necessary) and will handle those and any already outstanding ones. It
700	will block your process until at least one new event arrives (which could	758	will block your process until at least one new event arrives (which could
701	be an event internal to libev itself, so there is no guarantee that a	759	be an event internal to libev itself, so there is no guarantee that a
702	user-registered callback will be called), and will return after one	760	user-registered callback will be called), and will return after one
703	iteration of the loop.	761	iteration of the loop.
704		762
705	This is useful if you are waiting for some external event in conjunction	763	This is useful if you are waiting for some external event in conjunction
706	with something not expressible using other libev watchers (i.e. "roll your	764	with something not expressible using other libev watchers (i.e. "roll your
707	own C<ev_loop>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is	765	own C<ev_run>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is
708	usually a better approach for this kind of thing.	766	usually a better approach for this kind of thing.
709		767
710	Here are the gory details of what C<ev_loop> does:	768	Here are the gory details of what C<ev_run> does:
711		769
		770	- Increment loop depth.
		771	- Reset the ev_break status.
712	- Before the first iteration, call any pending watchers.	772	- Before the first iteration, call any pending watchers.
		773	LOOP:
713	* If EVFLAG_FORKCHECK was used, check for a fork.	774	- If EVFLAG_FORKCHECK was used, check for a fork.
714	- If a fork was detected (by any means), queue and call all fork watchers.	775	- If a fork was detected (by any means), queue and call all fork watchers.
715	- Queue and call all prepare watchers.	776	- Queue and call all prepare watchers.
		777	- If ev_break was called, goto FINISH.
716	- If we have been forked, detach and recreate the kernel state	778	- If we have been forked, detach and recreate the kernel state
717	as to not disturb the other process.	779	as to not disturb the other process.
718	- Update the kernel state with all outstanding changes.	780	- Update the kernel state with all outstanding changes.
719	- Update the "event loop time" (ev_now ()).	781	- Update the "event loop time" (ev_now ()).
720	- Calculate for how long to sleep or block, if at all	782	- Calculate for how long to sleep or block, if at all
721	(active idle watchers, EVLOOP_NONBLOCK or not having	783	(active idle watchers, EVRUN_NOWAIT or not having
722	any active watchers at all will result in not sleeping).	784	any active watchers at all will result in not sleeping).
723	- Sleep if the I/O and timer collect interval say so.	785	- Sleep if the I/O and timer collect interval say so.
		786	- Increment loop iteration counter.
724	- Block the process, waiting for any events.	787	- Block the process, waiting for any events.
725	- Queue all outstanding I/O (fd) events.	788	- Queue all outstanding I/O (fd) events.
726	- Update the "event loop time" (ev_now ()), and do time jump adjustments.	789	- Update the "event loop time" (ev_now ()), and do time jump adjustments.
727	- Queue all expired timers.	790	- Queue all expired timers.
728	- Queue all expired periodics.	791	- Queue all expired periodics.
729	- Unless any events are pending now, queue all idle watchers.	792	- Queue all idle watchers with priority higher than that of pending events.
730	- Queue all check watchers.	793	- Queue all check watchers.
731	- Call all queued watchers in reverse order (i.e. check watchers first).	794	- Call all queued watchers in reverse order (i.e. check watchers first).
732	Signals and child watchers are implemented as I/O watchers, and will	795	Signals and child watchers are implemented as I/O watchers, and will
733	be handled here by queueing them when their watcher gets executed.	796	be handled here by queueing them when their watcher gets executed.
734	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	797	- If ev_break has been called, or EVRUN_ONCE or EVRUN_NOWAIT
735	were used, or there are no active watchers, return, otherwise	798	were used, or there are no active watchers, goto FINISH, otherwise
736	continue with step *.	799	continue with step LOOP.
		800	FINISH:
		801	- Reset the ev_break status iff it was EVBREAK_ONE.
		802	- Decrement the loop depth.
		803	- Return.
737		804
738	Example: Queue some jobs and then loop until no events are outstanding	805	Example: Queue some jobs and then loop until no events are outstanding
739	anymore.	806	anymore.
740		807
741	... queue jobs here, make sure they register event watchers as long	808	... queue jobs here, make sure they register event watchers as long
742	... as they still have work to do (even an idle watcher will do..)	809	... as they still have work to do (even an idle watcher will do..)
743	ev_loop (my_loop, 0);	810	ev_run (my_loop, 0);
744	... jobs done or somebody called unloop. yeah!	811	... jobs done or somebody called unloop. yeah!
745		812
746	=item ev_unloop (loop, how)	813	=item ev_break (loop, how)
747		814
748	Can be used to make a call to C<ev_loop> return early (but only after it	815	Can be used to make a call to C<ev_run> return early (but only after it
749	has processed all outstanding events). The C<how> argument must be either	816	has processed all outstanding events). The C<how> argument must be either
750	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	817	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or
751	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	818	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.
752		819
753	This "unloop state" will be cleared when entering C<ev_loop> again.	820	This "unloop state" will be cleared when entering C<ev_run> again.
754		821
755	It is safe to call C<ev_unloop> from otuside any C<ev_loop> calls.	822	It is safe to call C<ev_break> from outside any C<ev_run> calls. ##TODO##
756		823
757	=item ev_ref (loop)	824	=item ev_ref (loop)
758		825
759	=item ev_unref (loop)	826	=item ev_unref (loop)
760		827
761	Ref/unref can be used to add or remove a reference count on the event	828	Ref/unref can be used to add or remove a reference count on the event
762	loop: Every watcher keeps one reference, and as long as the reference	829	loop: Every watcher keeps one reference, and as long as the reference
763	count is nonzero, C<ev_loop> will not return on its own.	830	count is nonzero, C<ev_run> will not return on its own.
764		831
765	If you have a watcher you never unregister that should not keep C<ev_loop>	832	This is useful when you have a watcher that you never intend to
766	from returning, call ev_unref() after starting, and ev_ref() before	833	unregister, but that nevertheless should not keep C<ev_run> from
		834	returning. In such a case, call C<ev_unref> after starting, and C<ev_ref>
767	stopping it.	835	before stopping it.
768		836
769	As an example, libev itself uses this for its internal signal pipe: It	837	As an example, libev itself uses this for its internal signal pipe: It
770	is not visible to the libev user and should not keep C<ev_loop> from	838	is not visible to the libev user and should not keep C<ev_run> from
771	exiting if no event watchers registered by it are active. It is also an	839	exiting if no event watchers registered by it are active. It is also an
772	excellent way to do this for generic recurring timers or from within	840	excellent way to do this for generic recurring timers or from within
773	third-party libraries. Just remember to I<unref after start> and I<ref	841	third-party libraries. Just remember to I<unref after start> and I<ref
774	before stop> (but only if the watcher wasn't active before, or was active	842	before stop> (but only if the watcher wasn't active before, or was active
775	before, respectively. Note also that libev might stop watchers itself	843	before, respectively. Note also that libev might stop watchers itself
776	(e.g. non-repeating timers) in which case you have to C<ev_ref>	844	(e.g. non-repeating timers) in which case you have to C<ev_ref>
777	in the callback).	845	in the callback).
778		846
779	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	847	Example: Create a signal watcher, but keep it from keeping C<ev_run>
780	running when nothing else is active.	848	running when nothing else is active.
781		849
782	ev_signal exitsig;	850	ev_signal exitsig;
783	ev_signal_init (&exitsig, sig_cb, SIGINT);	851	ev_signal_init (&exitsig, sig_cb, SIGINT);
784	ev_signal_start (loop, &exitsig);	852	ev_signal_start (loop, &exitsig);
…		…
811		879
812	By setting a higher I<io collect interval> you allow libev to spend more	880	By setting a higher I<io collect interval> you allow libev to spend more
813	time collecting I/O events, so you can handle more events per iteration,	881	time collecting I/O events, so you can handle more events per iteration,
814	at the cost of increasing latency. Timeouts (both C<ev_periodic> and	882	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
815	C<ev_timer>) will be not affected. Setting this to a non-null value will	883	C<ev_timer>) will be not affected. Setting this to a non-null value will
816	introduce an additional C<ev_sleep ()> call into most loop iterations.	884	introduce an additional C<ev_sleep ()> call into most loop iterations. The
		885	sleep time ensures that libev will not poll for I/O events more often then
		886	once per this interval, on average.
817		887
818	Likewise, by setting a higher I<timeout collect interval> you allow libev	888	Likewise, by setting a higher I<timeout collect interval> you allow libev
819	to spend more time collecting timeouts, at the expense of increased	889	to spend more time collecting timeouts, at the expense of increased
820	latency/jitter/inexactness (the watcher callback will be called	890	latency/jitter/inexactness (the watcher callback will be called
821	later). C<ev_io> watchers will not be affected. Setting this to a non-null	891	later). C<ev_io> watchers will not be affected. Setting this to a non-null
…		…
823		893
824	Many (busy) programs can usually benefit by setting the I/O collect	894	Many (busy) programs can usually benefit by setting the I/O collect
825	interval to a value near C<0.1> or so, which is often enough for	895	interval to a value near C<0.1> or so, which is often enough for
826	interactive servers (of course not for games), likewise for timeouts. It	896	interactive servers (of course not for games), likewise for timeouts. It
827	usually doesn't make much sense to set it to a lower value than C<0.01>,	897	usually doesn't make much sense to set it to a lower value than C<0.01>,
828	as this approaches the timing granularity of most systems.	898	as this approaches the timing granularity of most systems. Note that if
		899	you do transactions with the outside world and you can't increase the
		900	parallelity, then this setting will limit your transaction rate (if you
		901	need to poll once per transaction and the I/O collect interval is 0.01,
		902	then you can't do more than 100 transactions per second).
829		903
830	Setting the I<timeout collect interval> can improve the opportunity for	904	Setting the I<timeout collect interval> can improve the opportunity for
831	saving power, as the program will "bundle" timer callback invocations that	905	saving power, as the program will "bundle" timer callback invocations that
832	are "near" in time together, by delaying some, thus reducing the number of	906	are "near" in time together, by delaying some, thus reducing the number of
833	times the process sleeps and wakes up again. Another useful technique to	907	times the process sleeps and wakes up again. Another useful technique to
834	reduce iterations/wake-ups is to use C<ev_periodic> watchers and make sure	908	reduce iterations/wake-ups is to use C<ev_periodic> watchers and make sure
835	they fire on, say, one-second boundaries only.	909	they fire on, say, one-second boundaries only.
836		910
		911	Example: we only need 0.1s timeout granularity, and we wish not to poll
		912	more often than 100 times per second:
		913
		914	ev_set_timeout_collect_interval (EV_DEFAULT_UC_ 0.1);
		915	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);
		916
		917	=item ev_invoke_pending (loop)
		918
		919	This call will simply invoke all pending watchers while resetting their
		920	pending state. Normally, C<ev_run> does this automatically when required,
		921	but when overriding the invoke callback this call comes handy. This
		922	function can be invoked from a watcher - this can be useful for example
		923	when you want to do some lengthy calculation and want to pass further
		924	event handling to another thread (you still have to make sure only one
		925	thread executes within C<ev_invoke_pending> or C<ev_run> of course).
		926
		927	=item int ev_pending_count (loop)
		928
		929	Returns the number of pending watchers - zero indicates that no watchers
		930	are pending.
		931
		932	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))
		933
		934	This overrides the invoke pending functionality of the loop: Instead of
		935	invoking all pending watchers when there are any, C<ev_run> will call
		936	this callback instead. This is useful, for example, when you want to
		937	invoke the actual watchers inside another context (another thread etc.).
		938
		939	If you want to reset the callback, use C<ev_invoke_pending> as new
		940	callback.
		941
		942	=item ev_set_loop_release_cb (loop, void (*release)(EV_P), void (*acquire)(EV_P))
		943
		944	Sometimes you want to share the same loop between multiple threads. This
		945	can be done relatively simply by putting mutex_lock/unlock calls around
		946	each call to a libev function.
		947
		948	However, C<ev_run> can run an indefinite time, so it is not feasible
		949	to wait for it to return. One way around this is to wake up the event
		950	loop via C<ev_break> and C<av_async_send>, another way is to set these
		951	I<release> and I<acquire> callbacks on the loop.
		952
		953	When set, then C<release> will be called just before the thread is
		954	suspended waiting for new events, and C<acquire> is called just
		955	afterwards.
		956
		957	Ideally, C<release> will just call your mutex_unlock function, and
		958	C<acquire> will just call the mutex_lock function again.
		959
		960	While event loop modifications are allowed between invocations of
		961	C<release> and C<acquire> (that's their only purpose after all), no
		962	modifications done will affect the event loop, i.e. adding watchers will
		963	have no effect on the set of file descriptors being watched, or the time
		964	waited. Use an C<ev_async> watcher to wake up C<ev_run> when you want it
		965	to take note of any changes you made.
		966
		967	In theory, threads executing C<ev_run> will be async-cancel safe between
		968	invocations of C<release> and C<acquire>.
		969
		970	See also the locking example in the C<THREADS> section later in this
		971	document.
		972
		973	=item ev_set_userdata (loop, void *data)
		974
		975	=item ev_userdata (loop)
		976
		977	Set and retrieve a single C<void *> associated with a loop. When
		978	C<ev_set_userdata> has never been called, then C<ev_userdata> returns
		979	C<0.>
		980
		981	These two functions can be used to associate arbitrary data with a loop,
		982	and are intended solely for the C<invoke_pending_cb>, C<release> and
		983	C<acquire> callbacks described above, but of course can be (ab-)used for
		984	any other purpose as well.
		985
837	=item ev_loop_verify (loop)	986	=item ev_verify (loop)
838		987
839	This function only does something when C<EV_VERIFY> support has been	988	This function only does something when C<EV_VERIFY> support has been
840	compiled in, which is the default for non-minimal builds. It tries to go	989	compiled in, which is the default for non-minimal builds. It tries to go
841	through all internal structures and checks them for validity. If anything	990	through all internal structures and checks them for validity. If anything
842	is found to be inconsistent, it will print an error message to standard	991	is found to be inconsistent, it will print an error message to standard
…		…
853		1002
854	In the following description, uppercase C<TYPE> in names stands for the	1003	In the following description, uppercase C<TYPE> in names stands for the
855	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer	1004	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer
856	watchers and C<ev_io_start> for I/O watchers.	1005	watchers and C<ev_io_start> for I/O watchers.
857		1006
858	A watcher is a structure that you create and register to record your	1007	A watcher is an opaque structure that you allocate and register to record
859	interest in some event. For instance, if you want to wait for STDIN to	1008	your interest in some event. To make a concrete example, imagine you want
860	become readable, you would create an C<ev_io> watcher for that:	1009	to wait for STDIN to become readable, you would create an C<ev_io> watcher
		1010	for that:
861		1011
862	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)	1012	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)
863	{	1013	{
864	ev_io_stop (w);	1014	ev_io_stop (w);
865	ev_unloop (loop, EVUNLOOP_ALL);	1015	ev_break (loop, EVBREAK_ALL);
866	}	1016	}
867		1017
868	struct ev_loop *loop = ev_default_loop (0);	1018	struct ev_loop *loop = ev_default_loop (0);
869		1019
870	ev_io stdin_watcher;	1020	ev_io stdin_watcher;
871		1021
872	ev_init (&stdin_watcher, my_cb);	1022	ev_init (&stdin_watcher, my_cb);
873	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);	1023	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
874	ev_io_start (loop, &stdin_watcher);	1024	ev_io_start (loop, &stdin_watcher);
875		1025
876	ev_loop (loop, 0);	1026	ev_run (loop, 0);
877		1027
878	As you can see, you are responsible for allocating the memory for your	1028	As you can see, you are responsible for allocating the memory for your
879	watcher structures (and it is I<usually> a bad idea to do this on the	1029	watcher structures (and it is I<usually> a bad idea to do this on the
880	stack).	1030	stack).
881		1031
882	Each watcher has an associated watcher structure (called C<struct ev_TYPE>	1032	Each watcher has an associated watcher structure (called C<struct ev_TYPE>
883	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).	1033	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).
884		1034
885	Each watcher structure must be initialised by a call to C<ev_init	1035	Each watcher structure must be initialised by a call to C<ev_init (watcher
886	(watcher *, callback)>, which expects a callback to be provided. This	1036	*, callback)>, which expects a callback to be provided. This callback is
887	callback gets invoked each time the event occurs (or, in the case of I/O	1037	invoked each time the event occurs (or, in the case of I/O watchers, each
888	watchers, each time the event loop detects that the file descriptor given	1038	time the event loop detects that the file descriptor given is readable
889	is readable and/or writable).	1039	and/or writable).
890		1040
891	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>	1041	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>
892	macro to configure it, with arguments specific to the watcher type. There	1042	macro to configure it, with arguments specific to the watcher type. There
893	is also a macro to combine initialisation and setting in one call: C<<	1043	is also a macro to combine initialisation and setting in one call: C<<
894	ev_TYPE_init (watcher *, callback, ...) >>.	1044	ev_TYPE_init (watcher *, callback, ...) >>.
…		…
917	=item C<EV_WRITE>	1067	=item C<EV_WRITE>
918		1068
919	The file descriptor in the C<ev_io> watcher has become readable and/or	1069	The file descriptor in the C<ev_io> watcher has become readable and/or
920	writable.	1070	writable.
921		1071
922	=item C<EV_TIMEOUT>	1072	=item C<EV_TIMER>
923		1073
924	The C<ev_timer> watcher has timed out.	1074	The C<ev_timer> watcher has timed out.
925		1075
926	=item C<EV_PERIODIC>	1076	=item C<EV_PERIODIC>
927		1077
…		…
945		1095
946	=item C<EV_PREPARE>	1096	=item C<EV_PREPARE>
947		1097
948	=item C<EV_CHECK>	1098	=item C<EV_CHECK>
949		1099
950	All C<ev_prepare> watchers are invoked just I<before> C<ev_loop> starts	1100	All C<ev_prepare> watchers are invoked just I<before> C<ev_run> starts
951	to gather new events, and all C<ev_check> watchers are invoked just after	1101	to gather new events, and all C<ev_check> watchers are invoked just after
952	C<ev_loop> has gathered them, but before it invokes any callbacks for any	1102	C<ev_run> has gathered them, but before it invokes any callbacks for any
953	received events. Callbacks of both watcher types can start and stop as	1103	received events. Callbacks of both watcher types can start and stop as
954	many watchers as they want, and all of them will be taken into account	1104	many watchers as they want, and all of them will be taken into account
955	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	1105	(for example, a C<ev_prepare> watcher might start an idle watcher to keep
956	C<ev_loop> from blocking).	1106	C<ev_run> from blocking).
957		1107
958	=item C<EV_EMBED>	1108	=item C<EV_EMBED>
959		1109
960	The embedded event loop specified in the C<ev_embed> watcher needs attention.	1110	The embedded event loop specified in the C<ev_embed> watcher needs attention.
961		1111
962	=item C<EV_FORK>	1112	=item C<EV_FORK>
963		1113
964	The event loop has been resumed in the child process after fork (see	1114	The event loop has been resumed in the child process after fork (see
965	C<ev_fork>).	1115	C<ev_fork>).
		1116
		1117	=item C<EV_CLEANUP>
		1118
		1119	The event loop is abotu to be destroyed (see C<ev_cleanup>).
966		1120
967	=item C<EV_ASYNC>	1121	=item C<EV_ASYNC>
968		1122
969	The given async watcher has been asynchronously notified (see C<ev_async>).	1123	The given async watcher has been asynchronously notified (see C<ev_async>).
970		1124
…		…
992	programs, though, as the fd could already be closed and reused for another	1146	programs, though, as the fd could already be closed and reused for another
993	thing, so beware.	1147	thing, so beware.
994		1148
995	=back	1149	=back
996		1150
		1151	=head2 WATCHER STATES
		1152
		1153	There are various watcher states mentioned throughout this manual -
		1154	active, pending and so on. In this section these states and the rules to
		1155	transition between them will be described in more detail - and while these
		1156	rules might look complicated, they usually do "the right thing".
		1157
		1158	=over 4
		1159
		1160	=item initialiased
		1161
		1162	Before a watcher can be registered with the event looop it has to be
		1163	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
		1164	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
		1165
		1166	In this state it is simply some block of memory that is suitable for use
		1167	in an event loop. It can be moved around, freed, reused etc. at will.
		1168
		1169	=item started/running/active
		1170
		1171	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
		1172	property of the event loop, and is actively waiting for events. While in
		1173	this state it cannot be accessed (except in a few documented ways), moved,
		1174	freed or anything else - the only legal thing is to keep a pointer to it,
		1175	and call libev functions on it that are documented to work on active watchers.
		1176
		1177	=item pending
		1178
		1179	If a watcher is active and libev determines that an event it is interested
		1180	in has occurred (such as a timer expiring), it will become pending. It will
		1181	stay in this pending state until either it is stopped or its callback is
		1182	about to be invoked, so it is not normally pending inside the watcher
		1183	callback.
		1184
		1185	The watcher might or might not be active while it is pending (for example,
		1186	an expired non-repeating timer can be pending but no longer active). If it
		1187	is stopped, it can be freely accessed (e.g. by calling C<ev_TYPE_set>),
		1188	but it is still property of the event loop at this time, so cannot be
		1189	moved, freed or reused. And if it is active the rules described in the
		1190	previous item still apply.
		1191
		1192	It is also possible to feed an event on a watcher that is not active (e.g.
		1193	via C<ev_feed_event>), in which case it becomes pending without being
		1194	active.
		1195
		1196	=item stopped
		1197
		1198	A watcher can be stopped implicitly by libev (in which case it might still
		1199	be pending), or explicitly by calling its C<ev_TYPE_stop> function. The
		1200	latter will clear any pending state the watcher might be in, regardless
		1201	of whether it was active or not, so stopping a watcher explicitly before
		1202	freeing it is often a good idea.
		1203
		1204	While stopped (and not pending) the watcher is essentially in the
		1205	initialised state, that is it can be reused, moved, modified in any way
		1206	you wish.
		1207
		1208	=back
		1209
997	=head2 GENERIC WATCHER FUNCTIONS	1210	=head2 GENERIC WATCHER FUNCTIONS
998		1211
999	=over 4	1212	=over 4
1000		1213
1001	=item C<ev_init> (ev_TYPE *watcher, callback)	1214	=item C<ev_init> (ev_TYPE *watcher, callback)
…		…
1017		1230
1018	ev_io w;	1231	ev_io w;
1019	ev_init (&w, my_cb);	1232	ev_init (&w, my_cb);
1020	ev_io_set (&w, STDIN_FILENO, EV_READ);	1233	ev_io_set (&w, STDIN_FILENO, EV_READ);
1021		1234
1022	=item C<ev_TYPE_set> (ev_TYPE *, [args])	1235	=item C<ev_TYPE_set> (ev_TYPE *watcher, [args])
1023		1236
1024	This macro initialises the type-specific parts of a watcher. You need to	1237	This macro initialises the type-specific parts of a watcher. You need to
1025	call C<ev_init> at least once before you call this macro, but you can	1238	call C<ev_init> at least once before you call this macro, but you can
1026	call C<ev_TYPE_set> any number of times. You must not, however, call this	1239	call C<ev_TYPE_set> any number of times. You must not, however, call this
1027	macro on a watcher that is active (it can be pending, however, which is a	1240	macro on a watcher that is active (it can be pending, however, which is a
…		…
1040		1253
1041	Example: Initialise and set an C<ev_io> watcher in one step.	1254	Example: Initialise and set an C<ev_io> watcher in one step.
1042		1255
1043	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);	1256	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);
1044		1257
1045	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)	1258	=item C<ev_TYPE_start> (loop, ev_TYPE *watcher)
1046		1259
1047	Starts (activates) the given watcher. Only active watchers will receive	1260	Starts (activates) the given watcher. Only active watchers will receive
1048	events. If the watcher is already active nothing will happen.	1261	events. If the watcher is already active nothing will happen.
1049		1262
1050	Example: Start the C<ev_io> watcher that is being abused as example in this	1263	Example: Start the C<ev_io> watcher that is being abused as example in this
1051	whole section.	1264	whole section.
1052		1265
1053	ev_io_start (EV_DEFAULT_UC, &w);	1266	ev_io_start (EV_DEFAULT_UC, &w);
1054		1267
1055	=item C<ev_TYPE_stop> (loop *, ev_TYPE *watcher)	1268	=item C<ev_TYPE_stop> (loop, ev_TYPE *watcher)
1056		1269
1057	Stops the given watcher if active, and clears the pending status (whether	1270	Stops the given watcher if active, and clears the pending status (whether
1058	the watcher was active or not).	1271	the watcher was active or not).
1059		1272
1060	It is possible that stopped watchers are pending - for example,	1273	It is possible that stopped watchers are pending - for example,
…		…
1085	=item ev_cb_set (ev_TYPE *watcher, callback)	1298	=item ev_cb_set (ev_TYPE *watcher, callback)
1086		1299
1087	Change the callback. You can change the callback at virtually any time	1300	Change the callback. You can change the callback at virtually any time
1088	(modulo threads).	1301	(modulo threads).
1089		1302
1090	=item ev_set_priority (ev_TYPE *watcher, priority)	1303	=item ev_set_priority (ev_TYPE *watcher, int priority)
1091		1304
1092	=item int ev_priority (ev_TYPE *watcher)	1305	=item int ev_priority (ev_TYPE *watcher)
1093		1306
1094	Set and query the priority of the watcher. The priority is a small	1307	Set and query the priority of the watcher. The priority is a small
1095	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>	1308	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
…		…
1126	returns its C<revents> bitset (as if its callback was invoked). If the	1339	returns its C<revents> bitset (as if its callback was invoked). If the
1127	watcher isn't pending it does nothing and returns C<0>.	1340	watcher isn't pending it does nothing and returns C<0>.
1128		1341
1129	Sometimes it can be useful to "poll" a watcher instead of waiting for its	1342	Sometimes it can be useful to "poll" a watcher instead of waiting for its
1130	callback to be invoked, which can be accomplished with this function.	1343	callback to be invoked, which can be accomplished with this function.
		1344
		1345	=item ev_feed_event (loop, ev_TYPE *watcher, int revents)
		1346
		1347	Feeds the given event set into the event loop, as if the specified event
		1348	had happened for the specified watcher (which must be a pointer to an
		1349	initialised but not necessarily started event watcher). Obviously you must
		1350	not free the watcher as long as it has pending events.
		1351
		1352	Stopping the watcher, letting libev invoke it, or calling
		1353	C<ev_clear_pending> will clear the pending event, even if the watcher was
		1354	not started in the first place.
		1355
		1356	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
		1357	functions that do not need a watcher.
1131		1358
1132	=back	1359	=back
1133		1360
1134		1361
1135	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	1362	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
…		…
1184	#include <stddef.h>	1411	#include <stddef.h>
1185		1412
1186	static void	1413	static void
1187	t1_cb (EV_P_ ev_timer *w, int revents)	1414	t1_cb (EV_P_ ev_timer *w, int revents)
1188	{	1415	{
1189	struct my_biggy big = (struct my_biggy *	1416	struct my_biggy big = (struct my_biggy *)
1190	(((char *)w) - offsetof (struct my_biggy, t1));	1417	(((char *)w) - offsetof (struct my_biggy, t1));
1191	}	1418	}
1192		1419
1193	static void	1420	static void
1194	t2_cb (EV_P_ ev_timer *w, int revents)	1421	t2_cb (EV_P_ ev_timer *w, int revents)
1195	{	1422	{
1196	struct my_biggy big = (struct my_biggy *	1423	struct my_biggy big = (struct my_biggy *)
1197	(((char *)w) - offsetof (struct my_biggy, t2));	1424	(((char *)w) - offsetof (struct my_biggy, t2));
1198	}	1425	}
1199		1426
1200	=head2 WATCHER PRIORITY MODELS	1427	=head2 WATCHER PRIORITY MODELS
1201		1428
…		…
1246		1473
1247	For example, to emulate how many other event libraries handle priorities,	1474	For example, to emulate how many other event libraries handle priorities,
1248	you can associate an C<ev_idle> watcher to each such watcher, and in	1475	you can associate an C<ev_idle> watcher to each such watcher, and in
1249	the normal watcher callback, you just start the idle watcher. The real	1476	the normal watcher callback, you just start the idle watcher. The real
1250	processing is done in the idle watcher callback. This causes libev to	1477	processing is done in the idle watcher callback. This causes libev to
1251	continously poll and process kernel event data for the watcher, but when	1478	continuously poll and process kernel event data for the watcher, but when
1252	the lock-out case is known to be rare (which in turn is rare :), this is	1479	the lock-out case is known to be rare (which in turn is rare :), this is
1253	workable.	1480	workable.
1254		1481
1255	Usually, however, the lock-out model implemented that way will perform	1482	Usually, however, the lock-out model implemented that way will perform
1256	miserably under the type of load it was designed to handle. In that case,	1483	miserably under the type of load it was designed to handle. In that case,
…		…
1270	{	1497	{
1271	// stop the I/O watcher, we received the event, but	1498	// stop the I/O watcher, we received the event, but
1272	// are not yet ready to handle it.	1499	// are not yet ready to handle it.
1273	ev_io_stop (EV_A_ w);	1500	ev_io_stop (EV_A_ w);
1274		1501
1275	// start the idle watcher to ahndle the actual event.	1502	// start the idle watcher to handle the actual event.
1276	// it will not be executed as long as other watchers	1503	// it will not be executed as long as other watchers
1277	// with the default priority are receiving events.	1504	// with the default priority are receiving events.
1278	ev_idle_start (EV_A_ &idle);	1505	ev_idle_start (EV_A_ &idle);
1279	}	1506	}
1280		1507
1281	static void	1508	static void
1282	idle-cb (EV_P_ ev_idle *w, int revents)	1509	idle_cb (EV_P_ ev_idle *w, int revents)
1283	{	1510	{
1284	// actual processing	1511	// actual processing
1285	read (STDIN_FILENO, ...);	1512	read (STDIN_FILENO, ...);
1286		1513
1287	// have to start the I/O watcher again, as	1514	// have to start the I/O watcher again, as
…		…
1332	descriptors to non-blocking mode is also usually a good idea (but not	1559	descriptors to non-blocking mode is also usually a good idea (but not
1333	required if you know what you are doing).	1560	required if you know what you are doing).
1334		1561
1335	If you cannot use non-blocking mode, then force the use of a	1562	If you cannot use non-blocking mode, then force the use of a
1336	known-to-be-good backend (at the time of this writing, this includes only	1563	known-to-be-good backend (at the time of this writing, this includes only
1337	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>).	1564	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>). The same applies to file
		1565	descriptors for which non-blocking operation makes no sense (such as
		1566	files) - libev doesn't guarantee any specific behaviour in that case.
1338		1567
1339	Another thing you have to watch out for is that it is quite easy to	1568	Another thing you have to watch out for is that it is quite easy to
1340	receive "spurious" readiness notifications, that is your callback might	1569	receive "spurious" readiness notifications, that is your callback might
1341	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1570	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
1342	because there is no data. Not only are some backends known to create a	1571	because there is no data. Not only are some backends known to create a
…		…
1407		1636
1408	So when you encounter spurious, unexplained daemon exits, make sure you	1637	So when you encounter spurious, unexplained daemon exits, make sure you
1409	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon	1638	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
1410	somewhere, as that would have given you a big clue).	1639	somewhere, as that would have given you a big clue).
1411		1640
		1641	=head3 The special problem of accept()ing when you can't
		1642
		1643	Many implementations of the POSIX C<accept> function (for example,
		1644	found in post-2004 Linux) have the peculiar behaviour of not removing a
		1645	connection from the pending queue in all error cases.
		1646
		1647	For example, larger servers often run out of file descriptors (because
		1648	of resource limits), causing C<accept> to fail with C<ENFILE> but not
		1649	rejecting the connection, leading to libev signalling readiness on
		1650	the next iteration again (the connection still exists after all), and
		1651	typically causing the program to loop at 100% CPU usage.
		1652
		1653	Unfortunately, the set of errors that cause this issue differs between
		1654	operating systems, there is usually little the app can do to remedy the
		1655	situation, and no known thread-safe method of removing the connection to
		1656	cope with overload is known (to me).
		1657
		1658	One of the easiest ways to handle this situation is to just ignore it
		1659	- when the program encounters an overload, it will just loop until the
		1660	situation is over. While this is a form of busy waiting, no OS offers an
		1661	event-based way to handle this situation, so it's the best one can do.
		1662
		1663	A better way to handle the situation is to log any errors other than
		1664	C<EAGAIN> and C<EWOULDBLOCK>, making sure not to flood the log with such
		1665	messages, and continue as usual, which at least gives the user an idea of
		1666	what could be wrong ("raise the ulimit!"). For extra points one could stop
		1667	the C<ev_io> watcher on the listening fd "for a while", which reduces CPU
		1668	usage.
		1669
		1670	If your program is single-threaded, then you could also keep a dummy file
		1671	descriptor for overload situations (e.g. by opening F</dev/null>), and
		1672	when you run into C<ENFILE> or C<EMFILE>, close it, run C<accept>,
		1673	close that fd, and create a new dummy fd. This will gracefully refuse
		1674	clients under typical overload conditions.
		1675
		1676	The last way to handle it is to simply log the error and C<exit>, as
		1677	is often done with C<malloc> failures, but this results in an easy
		1678	opportunity for a DoS attack.
1412		1679
1413	=head3 Watcher-Specific Functions	1680	=head3 Watcher-Specific Functions
1414		1681
1415	=over 4	1682	=over 4
1416		1683
…		…
1448	...	1715	...
1449	struct ev_loop *loop = ev_default_init (0);	1716	struct ev_loop *loop = ev_default_init (0);
1450	ev_io stdin_readable;	1717	ev_io stdin_readable;
1451	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);	1718	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
1452	ev_io_start (loop, &stdin_readable);	1719	ev_io_start (loop, &stdin_readable);
1453	ev_loop (loop, 0);	1720	ev_run (loop, 0);
1454		1721
1455		1722
1456	=head2 C<ev_timer> - relative and optionally repeating timeouts	1723	=head2 C<ev_timer> - relative and optionally repeating timeouts
1457		1724
1458	Timer watchers are simple relative timers that generate an event after a	1725	Timer watchers are simple relative timers that generate an event after a
…		…
1463	year, it will still time out after (roughly) one hour. "Roughly" because	1730	year, it will still time out after (roughly) one hour. "Roughly" because
1464	detecting time jumps is hard, and some inaccuracies are unavoidable (the	1731	detecting time jumps is hard, and some inaccuracies are unavoidable (the
1465	monotonic clock option helps a lot here).	1732	monotonic clock option helps a lot here).
1466		1733
1467	The callback is guaranteed to be invoked only I<after> its timeout has	1734	The callback is guaranteed to be invoked only I<after> its timeout has
1468	passed. If multiple timers become ready during the same loop iteration	1735	passed (not I<at>, so on systems with very low-resolution clocks this
1469	then the ones with earlier time-out values are invoked before ones with	1736	might introduce a small delay). If multiple timers become ready during the
1470	later time-out values (but this is no longer true when a callback calls	1737	same loop iteration then the ones with earlier time-out values are invoked
1471	C<ev_loop> recursively).	1738	before ones of the same priority with later time-out values (but this is
		1739	no longer true when a callback calls C<ev_run> recursively).
1472		1740
1473	=head3 Be smart about timeouts	1741	=head3 Be smart about timeouts
1474		1742
1475	Many real-world problems involve some kind of timeout, usually for error	1743	Many real-world problems involve some kind of timeout, usually for error
1476	recovery. A typical example is an HTTP request - if the other side hangs,	1744	recovery. A typical example is an HTTP request - if the other side hangs,
…		…
1520	C<after> argument to C<ev_timer_set>, and only ever use the C<repeat>	1788	C<after> argument to C<ev_timer_set>, and only ever use the C<repeat>
1521	member and C<ev_timer_again>.	1789	member and C<ev_timer_again>.
1522		1790
1523	At start:	1791	At start:
1524		1792
1525	ev_timer_init (timer, callback);	1793	ev_init (timer, callback);
1526	timer->repeat = 60.;	1794	timer->repeat = 60.;
1527	ev_timer_again (loop, timer);	1795	ev_timer_again (loop, timer);
1528		1796
1529	Each time there is some activity:	1797	Each time there is some activity:
1530		1798
…		…
1562	ev_tstamp timeout = last_activity + 60.;	1830	ev_tstamp timeout = last_activity + 60.;
1563		1831
1564	// if last_activity + 60. is older than now, we did time out	1832	// if last_activity + 60. is older than now, we did time out
1565	if (timeout < now)	1833	if (timeout < now)
1566	{	1834	{
1567	// timeout occured, take action	1835	// timeout occurred, take action
1568	}	1836	}
1569	else	1837	else
1570	{	1838	{
1571	// callback was invoked, but there was some activity, re-arm	1839	// callback was invoked, but there was some activity, re-arm
1572	// the watcher to fire in last_activity + 60, which is	1840	// the watcher to fire in last_activity + 60, which is
…		…
1592		1860
1593	To start the timer, simply initialise the watcher and set C<last_activity>	1861	To start the timer, simply initialise the watcher and set C<last_activity>
1594	to the current time (meaning we just have some activity :), then call the	1862	to the current time (meaning we just have some activity :), then call the
1595	callback, which will "do the right thing" and start the timer:	1863	callback, which will "do the right thing" and start the timer:
1596		1864
1597	ev_timer_init (timer, callback);	1865	ev_init (timer, callback);
1598	last_activity = ev_now (loop);	1866	last_activity = ev_now (loop);
1599	callback (loop, timer, EV_TIMEOUT);	1867	callback (loop, timer, EV_TIMER);
1600		1868
1601	And when there is some activity, simply store the current time in	1869	And when there is some activity, simply store the current time in
1602	C<last_activity>, no libev calls at all:	1870	C<last_activity>, no libev calls at all:
1603		1871
1604	last_actiivty = ev_now (loop);	1872	last_activity = ev_now (loop);
1605		1873
1606	This technique is slightly more complex, but in most cases where the	1874	This technique is slightly more complex, but in most cases where the
1607	time-out is unlikely to be triggered, much more efficient.	1875	time-out is unlikely to be triggered, much more efficient.
1608		1876
1609	Changing the timeout is trivial as well (if it isn't hard-coded in the	1877	Changing the timeout is trivial as well (if it isn't hard-coded in the
…		…
1647		1915
1648	=head3 The special problem of time updates	1916	=head3 The special problem of time updates
1649		1917
1650	Establishing the current time is a costly operation (it usually takes at	1918	Establishing the current time is a costly operation (it usually takes at
1651	least two system calls): EV therefore updates its idea of the current	1919	least two system calls): EV therefore updates its idea of the current
1652	time only before and after C<ev_loop> collects new events, which causes a	1920	time only before and after C<ev_run> collects new events, which causes a
1653	growing difference between C<ev_now ()> and C<ev_time ()> when handling	1921	growing difference between C<ev_now ()> and C<ev_time ()> when handling
1654	lots of events in one iteration.	1922	lots of events in one iteration.
1655		1923
1656	The relative timeouts are calculated relative to the C<ev_now ()>	1924	The relative timeouts are calculated relative to the C<ev_now ()>
1657	time. This is usually the right thing as this timestamp refers to the time	1925	time. This is usually the right thing as this timestamp refers to the time
…		…
1663		1931
1664	If the event loop is suspended for a long time, you can also force an	1932	If the event loop is suspended for a long time, you can also force an
1665	update of the time returned by C<ev_now ()> by calling C<ev_now_update	1933	update of the time returned by C<ev_now ()> by calling C<ev_now_update
1666	()>.	1934	()>.
1667		1935
		1936	=head3 The special problems of suspended animation
		1937
		1938	When you leave the server world it is quite customary to hit machines that
		1939	can suspend/hibernate - what happens to the clocks during such a suspend?
		1940
		1941	Some quick tests made with a Linux 2.6.28 indicate that a suspend freezes
		1942	all processes, while the clocks (C<times>, C<CLOCK_MONOTONIC>) continue
		1943	to run until the system is suspended, but they will not advance while the
		1944	system is suspended. That means, on resume, it will be as if the program
		1945	was frozen for a few seconds, but the suspend time will not be counted
		1946	towards C<ev_timer> when a monotonic clock source is used. The real time
		1947	clock advanced as expected, but if it is used as sole clocksource, then a
		1948	long suspend would be detected as a time jump by libev, and timers would
		1949	be adjusted accordingly.
		1950
		1951	I would not be surprised to see different behaviour in different between
		1952	operating systems, OS versions or even different hardware.
		1953
		1954	The other form of suspend (job control, or sending a SIGSTOP) will see a
		1955	time jump in the monotonic clocks and the realtime clock. If the program
		1956	is suspended for a very long time, and monotonic clock sources are in use,
		1957	then you can expect C<ev_timer>s to expire as the full suspension time
		1958	will be counted towards the timers. When no monotonic clock source is in
		1959	use, then libev will again assume a timejump and adjust accordingly.
		1960
		1961	It might be beneficial for this latter case to call C<ev_suspend>
		1962	and C<ev_resume> in code that handles C<SIGTSTP>, to at least get
		1963	deterministic behaviour in this case (you can do nothing against
		1964	C<SIGSTOP>).
		1965
1668	=head3 Watcher-Specific Functions and Data Members	1966	=head3 Watcher-Specific Functions and Data Members
1669		1967
1670	=over 4	1968	=over 4
1671		1969
1672	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	1970	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
…		…
1698	C<repeat> value), or reset the running timer to the C<repeat> value.	1996	C<repeat> value), or reset the running timer to the C<repeat> value.
1699		1997
1700	This sounds a bit complicated, see L<Be smart about timeouts>, above, for a	1998	This sounds a bit complicated, see L<Be smart about timeouts>, above, for a
1701	usage example.	1999	usage example.
1702		2000
		2001	=item ev_tstamp ev_timer_remaining (loop, ev_timer *)
		2002
		2003	Returns the remaining time until a timer fires. If the timer is active,
		2004	then this time is relative to the current event loop time, otherwise it's
		2005	the timeout value currently configured.
		2006
		2007	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns
		2008	C<5>. When the timer is started and one second passes, C<ev_timer_remaining>
		2009	will return C<4>. When the timer expires and is restarted, it will return
		2010	roughly C<7> (likely slightly less as callback invocation takes some time,
		2011	too), and so on.
		2012
1703	=item ev_tstamp repeat [read-write]	2013	=item ev_tstamp repeat [read-write]
1704		2014
1705	The current C<repeat> value. Will be used each time the watcher times out	2015	The current C<repeat> value. Will be used each time the watcher times out
1706	or C<ev_timer_again> is called, and determines the next timeout (if any),	2016	or C<ev_timer_again> is called, and determines the next timeout (if any),
1707	which is also when any modifications are taken into account.	2017	which is also when any modifications are taken into account.
…		…
1732	}	2042	}
1733		2043
1734	ev_timer mytimer;	2044	ev_timer mytimer;
1735	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */	2045	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
1736	ev_timer_again (&mytimer); /* start timer */	2046	ev_timer_again (&mytimer); /* start timer */
1737	ev_loop (loop, 0);	2047	ev_run (loop, 0);
1738		2048
1739	// and in some piece of code that gets executed on any "activity":	2049	// and in some piece of code that gets executed on any "activity":
1740	// reset the timeout to start ticking again at 10 seconds	2050	// reset the timeout to start ticking again at 10 seconds
1741	ev_timer_again (&mytimer);	2051	ev_timer_again (&mytimer);
1742		2052
…		…
1768		2078
1769	As with timers, the callback is guaranteed to be invoked only when the	2079	As with timers, the callback is guaranteed to be invoked only when the
1770	point in time where it is supposed to trigger has passed. If multiple	2080	point in time where it is supposed to trigger has passed. If multiple
1771	timers become ready during the same loop iteration then the ones with	2081	timers become ready during the same loop iteration then the ones with
1772	earlier time-out values are invoked before ones with later time-out values	2082	earlier time-out values are invoked before ones with later time-out values
1773	(but this is no longer true when a callback calls C<ev_loop> recursively).	2083	(but this is no longer true when a callback calls C<ev_run> recursively).
1774		2084
1775	=head3 Watcher-Specific Functions and Data Members	2085	=head3 Watcher-Specific Functions and Data Members
1776		2086
1777	=over 4	2087	=over 4
1778		2088
…		…
1906	Example: Call a callback every hour, or, more precisely, whenever the	2216	Example: Call a callback every hour, or, more precisely, whenever the
1907	system time is divisible by 3600. The callback invocation times have	2217	system time is divisible by 3600. The callback invocation times have
1908	potentially a lot of jitter, but good long-term stability.	2218	potentially a lot of jitter, but good long-term stability.
1909		2219
1910	static void	2220	static void
1911	clock_cb (struct ev_loop *loop, ev_io *w, int revents)	2221	clock_cb (struct ev_loop *loop, ev_periodic *w, int revents)
1912	{	2222	{
1913	... its now a full hour (UTC, or TAI or whatever your clock follows)	2223	... its now a full hour (UTC, or TAI or whatever your clock follows)
1914	}	2224	}
1915		2225
1916	ev_periodic hourly_tick;	2226	ev_periodic hourly_tick;
…		…
1942	Signal watchers will trigger an event when the process receives a specific	2252	Signal watchers will trigger an event when the process receives a specific
1943	signal one or more times. Even though signals are very asynchronous, libev	2253	signal one or more times. Even though signals are very asynchronous, libev
1944	will try it's best to deliver signals synchronously, i.e. as part of the	2254	will try it's best to deliver signals synchronously, i.e. as part of the
1945	normal event processing, like any other event.	2255	normal event processing, like any other event.
1946		2256
1947	If you want signals asynchronously, just use C<sigaction> as you would	2257	If you want signals to be delivered truly asynchronously, just use
1948	do without libev and forget about sharing the signal. You can even use	2258	C<sigaction> as you would do without libev and forget about sharing
1949	C<ev_async> from a signal handler to synchronously wake up an event loop.	2259	the signal. You can even use C<ev_async> from a signal handler to
		2260	synchronously wake up an event loop.
1950		2261
1951	You can configure as many watchers as you like per signal. Only when the	2262	You can configure as many watchers as you like for the same signal, but
		2263	only within the same loop, i.e. you can watch for C<SIGINT> in your
		2264	default loop and for C<SIGIO> in another loop, but you cannot watch for
		2265	C<SIGINT> in both the default loop and another loop at the same time. At
		2266	the moment, C<SIGCHLD> is permanently tied to the default loop.
		2267
1952	first watcher gets started will libev actually register a signal handler	2268	When the first watcher gets started will libev actually register something
1953	with the kernel (thus it coexists with your own signal handlers as long as	2269	with the kernel (thus it coexists with your own signal handlers as long as
1954	you don't register any with libev for the same signal). Similarly, when	2270	you don't register any with libev for the same signal).
1955	the last signal watcher for a signal is stopped, libev will reset the
1956	signal handler to SIG_DFL (regardless of what it was set to before).
1957		2271
1958	If possible and supported, libev will install its handlers with	2272	If possible and supported, libev will install its handlers with
1959	C<SA_RESTART> behaviour enabled, so system calls should not be unduly	2273	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should
1960	interrupted. If you have a problem with system calls getting interrupted by	2274	not be unduly interrupted. If you have a problem with system calls getting
1961	signals you can block all signals in an C<ev_check> watcher and unblock	2275	interrupted by signals you can block all signals in an C<ev_check> watcher
1962	them in an C<ev_prepare> watcher.	2276	and unblock them in an C<ev_prepare> watcher.
		2277
		2278	=head3 The special problem of inheritance over fork/execve/pthread_create
		2279
		2280	Both the signal mask (C<sigprocmask>) and the signal disposition
		2281	(C<sigaction>) are unspecified after starting a signal watcher (and after
		2282	stopping it again), that is, libev might or might not block the signal,
		2283	and might or might not set or restore the installed signal handler.
		2284
		2285	While this does not matter for the signal disposition (libev never
		2286	sets signals to C<SIG_IGN>, so handlers will be reset to C<SIG_DFL> on
		2287	C<execve>), this matters for the signal mask: many programs do not expect
		2288	certain signals to be blocked.
		2289
		2290	This means that before calling C<exec> (from the child) you should reset
		2291	the signal mask to whatever "default" you expect (all clear is a good
		2292	choice usually).
		2293
		2294	The simplest way to ensure that the signal mask is reset in the child is
		2295	to install a fork handler with C<pthread_atfork> that resets it. That will
		2296	catch fork calls done by libraries (such as the libc) as well.
		2297
		2298	In current versions of libev, the signal will not be blocked indefinitely
		2299	unless you use the C<signalfd> API (C<EV_SIGNALFD>). While this reduces
		2300	the window of opportunity for problems, it will not go away, as libev
		2301	I<has> to modify the signal mask, at least temporarily.
		2302
		2303	So I can't stress this enough: I<If you do not reset your signal mask when
		2304	you expect it to be empty, you have a race condition in your code>. This
		2305	is not a libev-specific thing, this is true for most event libraries.
1963		2306
1964	=head3 Watcher-Specific Functions and Data Members	2307	=head3 Watcher-Specific Functions and Data Members
1965		2308
1966	=over 4	2309	=over 4
1967		2310
…		…
1983	Example: Try to exit cleanly on SIGINT.	2326	Example: Try to exit cleanly on SIGINT.
1984		2327
1985	static void	2328	static void
1986	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)	2329	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)
1987	{	2330	{
1988	ev_unloop (loop, EVUNLOOP_ALL);	2331	ev_break (loop, EVBREAK_ALL);
1989	}	2332	}
1990		2333
1991	ev_signal signal_watcher;	2334	ev_signal signal_watcher;
1992	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	2335	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
1993	ev_signal_start (loop, &signal_watcher);	2336	ev_signal_start (loop, &signal_watcher);
…		…
1999	some child status changes (most typically when a child of yours dies or	2342	some child status changes (most typically when a child of yours dies or
2000	exits). It is permissible to install a child watcher I<after> the child	2343	exits). It is permissible to install a child watcher I<after> the child
2001	has been forked (which implies it might have already exited), as long	2344	has been forked (which implies it might have already exited), as long
2002	as the event loop isn't entered (or is continued from a watcher), i.e.,	2345	as the event loop isn't entered (or is continued from a watcher), i.e.,
2003	forking and then immediately registering a watcher for the child is fine,	2346	forking and then immediately registering a watcher for the child is fine,
2004	but forking and registering a watcher a few event loop iterations later is	2347	but forking and registering a watcher a few event loop iterations later or
2005	not.	2348	in the next callback invocation is not.
2006		2349
2007	Only the default event loop is capable of handling signals, and therefore	2350	Only the default event loop is capable of handling signals, and therefore
2008	you can only register child watchers in the default event loop.	2351	you can only register child watchers in the default event loop.
2009		2352
		2353	Due to some design glitches inside libev, child watchers will always be
		2354	handled at maximum priority (their priority is set to C<EV_MAXPRI> by
		2355	libev)
		2356
2010	=head3 Process Interaction	2357	=head3 Process Interaction
2011		2358
2012	Libev grabs C<SIGCHLD> as soon as the default event loop is	2359	Libev grabs C<SIGCHLD> as soon as the default event loop is
2013	initialised. This is necessary to guarantee proper behaviour even if	2360	initialised. This is necessary to guarantee proper behaviour even if the
2014	the first child watcher is started after the child exits. The occurrence	2361	first child watcher is started after the child exits. The occurrence
2015	of C<SIGCHLD> is recorded asynchronously, but child reaping is done	2362	of C<SIGCHLD> is recorded asynchronously, but child reaping is done
2016	synchronously as part of the event loop processing. Libev always reaps all	2363	synchronously as part of the event loop processing. Libev always reaps all
2017	children, even ones not watched.	2364	children, even ones not watched.
2018		2365
2019	=head3 Overriding the Built-In Processing	2366	=head3 Overriding the Built-In Processing
…		…
2029	=head3 Stopping the Child Watcher	2376	=head3 Stopping the Child Watcher
2030		2377
2031	Currently, the child watcher never gets stopped, even when the	2378	Currently, the child watcher never gets stopped, even when the
2032	child terminates, so normally one needs to stop the watcher in the	2379	child terminates, so normally one needs to stop the watcher in the
2033	callback. Future versions of libev might stop the watcher automatically	2380	callback. Future versions of libev might stop the watcher automatically
2034	when a child exit is detected.	2381	when a child exit is detected (calling C<ev_child_stop> twice is not a
		2382	problem).
2035		2383
2036	=head3 Watcher-Specific Functions and Data Members	2384	=head3 Watcher-Specific Functions and Data Members
2037		2385
2038	=over 4	2386	=over 4
2039		2387
…		…
2365	// no longer anything immediate to do.	2713	// no longer anything immediate to do.
2366	}	2714	}
2367		2715
2368	ev_idle *idle_watcher = malloc (sizeof (ev_idle));	2716	ev_idle *idle_watcher = malloc (sizeof (ev_idle));
2369	ev_idle_init (idle_watcher, idle_cb);	2717	ev_idle_init (idle_watcher, idle_cb);
2370	ev_idle_start (loop, idle_cb);	2718	ev_idle_start (loop, idle_watcher);
2371		2719
2372		2720
2373	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!	2721	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!
2374		2722
2375	Prepare and check watchers are usually (but not always) used in pairs:	2723	Prepare and check watchers are usually (but not always) used in pairs:
2376	prepare watchers get invoked before the process blocks and check watchers	2724	prepare watchers get invoked before the process blocks and check watchers
2377	afterwards.	2725	afterwards.
2378		2726
2379	You I<must not> call C<ev_loop> or similar functions that enter	2727	You I<must not> call C<ev_run> or similar functions that enter
2380	the current event loop from either C<ev_prepare> or C<ev_check>	2728	the current event loop from either C<ev_prepare> or C<ev_check>
2381	watchers. Other loops than the current one are fine, however. The	2729	watchers. Other loops than the current one are fine, however. The
2382	rationale behind this is that you do not need to check for recursion in	2730	rationale behind this is that you do not need to check for recursion in
2383	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,	2731	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,
2384	C<ev_check> so if you have one watcher of each kind they will always be	2732	C<ev_check> so if you have one watcher of each kind they will always be
…		…
2468	struct pollfd fds [nfd];	2816	struct pollfd fds [nfd];
2469	// actual code will need to loop here and realloc etc.	2817	// actual code will need to loop here and realloc etc.
2470	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));	2818	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
2471		2819
2472	/* the callback is illegal, but won't be called as we stop during check */	2820	/* the callback is illegal, but won't be called as we stop during check */
2473	ev_timer_init (&tw, 0, timeout * 1e-3);	2821	ev_timer_init (&tw, 0, timeout * 1e-3, 0.);
2474	ev_timer_start (loop, &tw);	2822	ev_timer_start (loop, &tw);
2475		2823
2476	// create one ev_io per pollfd	2824	// create one ev_io per pollfd
2477	for (int i = 0; i < nfd; ++i)	2825	for (int i = 0; i < nfd; ++i)
2478	{	2826	{
…		…
2552		2900
2553	if (timeout >= 0)	2901	if (timeout >= 0)
2554	// create/start timer	2902	// create/start timer
2555		2903
2556	// poll	2904	// poll
2557	ev_loop (EV_A_ 0);	2905	ev_run (EV_A_ 0);
2558		2906
2559	// stop timer again	2907	// stop timer again
2560	if (timeout >= 0)	2908	if (timeout >= 0)
2561	ev_timer_stop (EV_A_ &to);	2909	ev_timer_stop (EV_A_ &to);
2562		2910
…		…
2640	if you do not want that, you need to temporarily stop the embed watcher).	2988	if you do not want that, you need to temporarily stop the embed watcher).
2641		2989
2642	=item ev_embed_sweep (loop, ev_embed *)	2990	=item ev_embed_sweep (loop, ev_embed *)
2643		2991
2644	Make a single, non-blocking sweep over the embedded loop. This works	2992	Make a single, non-blocking sweep over the embedded loop. This works
2645	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	2993	similarly to C<ev_run (embedded_loop, EVRUN_NOWAIT)>, but in the most
2646	appropriate way for embedded loops.	2994	appropriate way for embedded loops.
2647		2995
2648	=item struct ev_loop *other [read-only]	2996	=item struct ev_loop *other [read-only]
2649		2997
2650	The embedded event loop.	2998	The embedded event loop.
…		…
2710	C<ev_default_fork> cheats and calls it in the wrong process, the fork	3058	C<ev_default_fork> cheats and calls it in the wrong process, the fork
2711	handlers will be invoked, too, of course.	3059	handlers will be invoked, too, of course.
2712		3060
2713	=head3 The special problem of life after fork - how is it possible?	3061	=head3 The special problem of life after fork - how is it possible?
2714		3062
2715	Most uses of C<fork()> consist of forking, then some simple calls to ste	3063	Most uses of C<fork()> consist of forking, then some simple calls to set
2716	up/change the process environment, followed by a call to C<exec()>. This	3064	up/change the process environment, followed by a call to C<exec()>. This
2717	sequence should be handled by libev without any problems.	3065	sequence should be handled by libev without any problems.
2718		3066
2719	This changes when the application actually wants to do event handling	3067	This changes when the application actually wants to do event handling
2720	in the child, or both parent in child, in effect "continuing" after the	3068	in the child, or both parent in child, in effect "continuing" after the
…		…
2736	disadvantage of having to use multiple event loops (which do not support	3084	disadvantage of having to use multiple event loops (which do not support
2737	signal watchers).	3085	signal watchers).
2738		3086
2739	When this is not possible, or you want to use the default loop for	3087	When this is not possible, or you want to use the default loop for
2740	other reasons, then in the process that wants to start "fresh", call	3088	other reasons, then in the process that wants to start "fresh", call
2741	C<ev_default_destroy ()> followed by C<ev_default_loop (...)>. Destroying	3089	C<ev_loop_destroy (EV_DEFAULT)> followed by C<ev_default_loop (...)>.
2742	the default loop will "orphan" (not stop) all registered watchers, so you	3090	Destroying the default loop will "orphan" (not stop) all registered
2743	have to be careful not to execute code that modifies those watchers. Note	3091	watchers, so you have to be careful not to execute code that modifies
2744	also that in that case, you have to re-register any signal watchers.	3092	those watchers. Note also that in that case, you have to re-register any
		3093	signal watchers.
2745		3094
2746	=head3 Watcher-Specific Functions and Data Members	3095	=head3 Watcher-Specific Functions and Data Members
2747		3096
2748	=over 4	3097	=over 4
2749		3098
2750	=item ev_fork_init (ev_signal *, callback)	3099	=item ev_fork_init (ev_fork *, callback)
2751		3100
2752	Initialises and configures the fork watcher - it has no parameters of any	3101	Initialises and configures the fork watcher - it has no parameters of any
2753	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	3102	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
2754	believe me.	3103	believe me.
2755		3104
2756	=back	3105	=back
2757		3106
2758		3107
		3108	=head2 C<ev_cleanup> - even the best things end
		3109
		3110	Cleanup watchers are called just before the event loop they are registered
		3111	with is being destroyed.
		3112
		3113	While there is no guarantee that the event loop gets destroyed, cleanup
		3114	watchers provide a convenient method to install cleanup hooks for your
		3115	program, worker threads and so on - you just to make sure to destroy the
		3116	loop when you want them to be invoked.
		3117
		3118	Cleanup watchers are invoked in the same way as any other watcher. Unlike
		3119	all other watchers, they do not keep a reference to the event loop (which
		3120	makes a lot of sense if you think about it). Like all other watchers, you
		3121	can call libev functions in the callback, except C<ev_cleanup_start>.
		3122
		3123	=head3 Watcher-Specific Functions and Data Members
		3124
		3125	=over 4
		3126
		3127	=item ev_cleanup_init (ev_cleanup *, callback)
		3128
		3129	Initialises and configures the cleanup watcher - it has no parameters of
		3130	any kind. There is a C<ev_cleanup_set> macro, but using it is utterly
		3131	pointless, believe me.
		3132
		3133	=back
		3134
		3135	Example: Register an atexit handler to destroy the default loop, so any
		3136	cleanup functions are called.
		3137
		3138	static void
		3139	program_exits (void)
		3140	{
		3141	ev_loop_destroy (EV_DEFAULT_UC);
		3142	}
		3143
		3144	...
		3145	atexit (program_exits);
		3146
		3147
2759	=head2 C<ev_async> - how to wake up another event loop	3148	=head2 C<ev_async> - how to wake up an event loop
2760		3149
2761	In general, you cannot use an C<ev_loop> from multiple threads or other	3150	In general, you cannot use an C<ev_run> from multiple threads or other
2762	asynchronous sources such as signal handlers (as opposed to multiple event	3151	asynchronous sources such as signal handlers (as opposed to multiple event
2763	loops - those are of course safe to use in different threads).	3152	loops - those are of course safe to use in different threads).
2764		3153
2765	Sometimes, however, you need to wake up another event loop you do not	3154	Sometimes, however, you need to wake up an event loop you do not control,
2766	control, for example because it belongs to another thread. This is what	3155	for example because it belongs to another thread. This is what C<ev_async>
2767	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you	3156	watchers do: as long as the C<ev_async> watcher is active, you can signal
2768	can signal it by calling C<ev_async_send>, which is thread- and signal	3157	it by calling C<ev_async_send>, which is thread- and signal safe.
2769	safe.
2770		3158
2771	This functionality is very similar to C<ev_signal> watchers, as signals,	3159	This functionality is very similar to C<ev_signal> watchers, as signals,
2772	too, are asynchronous in nature, and signals, too, will be compressed	3160	too, are asynchronous in nature, and signals, too, will be compressed
2773	(i.e. the number of callback invocations may be less than the number of	3161	(i.e. the number of callback invocations may be less than the number of
2774	C<ev_async_sent> calls).	3162	C<ev_async_sent> calls).
…		…
2779	=head3 Queueing	3167	=head3 Queueing
2780		3168
2781	C<ev_async> does not support queueing of data in any way. The reason	3169	C<ev_async> does not support queueing of data in any way. The reason
2782	is that the author does not know of a simple (or any) algorithm for a	3170	is that the author does not know of a simple (or any) algorithm for a
2783	multiple-writer-single-reader queue that works in all cases and doesn't	3171	multiple-writer-single-reader queue that works in all cases and doesn't
2784	need elaborate support such as pthreads.	3172	need elaborate support such as pthreads or unportable memory access
		3173	semantics.
2785		3174
2786	That means that if you want to queue data, you have to provide your own	3175	That means that if you want to queue data, you have to provide your own
2787	queue. But at least I can tell you how to implement locking around your	3176	queue. But at least I can tell you how to implement locking around your
2788	queue:	3177	queue:
2789		3178
…		…
2928		3317
2929	If C<timeout> is less than 0, then no timeout watcher will be	3318	If C<timeout> is less than 0, then no timeout watcher will be
2930	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and	3319	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
2931	repeat = 0) will be started. C<0> is a valid timeout.	3320	repeat = 0) will be started. C<0> is a valid timeout.
2932		3321
2933	The callback has the type C<void (*cb)(int revents, void *arg)> and gets	3322	The callback has the type C<void (*cb)(int revents, void *arg)> and is
2934	passed an C<revents> set like normal event callbacks (a combination of	3323	passed an C<revents> set like normal event callbacks (a combination of
2935	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>	3324	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMER>) and the C<arg>
2936	value passed to C<ev_once>. Note that it is possible to receive I<both>	3325	value passed to C<ev_once>. Note that it is possible to receive I<both>
2937	a timeout and an io event at the same time - you probably should give io	3326	a timeout and an io event at the same time - you probably should give io
2938	events precedence.	3327	events precedence.
2939		3328
2940	Example: wait up to ten seconds for data to appear on STDIN_FILENO.	3329	Example: wait up to ten seconds for data to appear on STDIN_FILENO.
2941		3330
2942	static void stdin_ready (int revents, void *arg)	3331	static void stdin_ready (int revents, void *arg)
2943	{	3332	{
2944	if (revents & EV_READ)	3333	if (revents & EV_READ)
2945	/* stdin might have data for us, joy! */;	3334	/* stdin might have data for us, joy! */;
2946	else if (revents & EV_TIMEOUT)	3335	else if (revents & EV_TIMER)
2947	/* doh, nothing entered */;	3336	/* doh, nothing entered */;
2948	}	3337	}
2949		3338
2950	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	3339	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
2951		3340
2952	=item ev_feed_event (struct ev_loop *, watcher *, int revents)
2953
2954	Feeds the given event set into the event loop, as if the specified event
2955	had happened for the specified watcher (which must be a pointer to an
2956	initialised but not necessarily started event watcher).
2957
2958	=item ev_feed_fd_event (struct ev_loop *, int fd, int revents)	3341	=item ev_feed_fd_event (loop, int fd, int revents)
2959		3342
2960	Feed an event on the given fd, as if a file descriptor backend detected	3343	Feed an event on the given fd, as if a file descriptor backend detected
2961	the given events it.	3344	the given events it.
2962		3345
2963	=item ev_feed_signal_event (struct ev_loop *loop, int signum)	3346	=item ev_feed_signal_event (loop, int signum)
2964		3347
2965	Feed an event as if the given signal occurred (C<loop> must be the default	3348	Feed an event as if the given signal occurred (C<loop> must be the default
2966	loop!).	3349	loop!).
2967		3350
2968	=back	3351	=back
…		…
3048		3431
3049	=over 4	3432	=over 4
3050		3433
3051	=item ev::TYPE::TYPE ()	3434	=item ev::TYPE::TYPE ()
3052		3435
3053	=item ev::TYPE::TYPE (struct ev_loop *)	3436	=item ev::TYPE::TYPE (loop)
3054		3437
3055	=item ev::TYPE::~TYPE	3438	=item ev::TYPE::~TYPE
3056		3439
3057	The constructor (optionally) takes an event loop to associate the watcher	3440	The constructor (optionally) takes an event loop to associate the watcher
3058	with. If it is omitted, it will use C<EV_DEFAULT>.	3441	with. If it is omitted, it will use C<EV_DEFAULT>.
…		…
3091	myclass obj;	3474	myclass obj;
3092	ev::io iow;	3475	ev::io iow;
3093	iow.set <myclass, &myclass::io_cb> (&obj);	3476	iow.set <myclass, &myclass::io_cb> (&obj);
3094		3477
3095	=item w->set (object *)	3478	=item w->set (object *)
3096
3097	This is an B<experimental> feature that might go away in a future version.
3098		3479
3099	This is a variation of a method callback - leaving out the method to call	3480	This is a variation of a method callback - leaving out the method to call
3100	will default the method to C<operator ()>, which makes it possible to use	3481	will default the method to C<operator ()>, which makes it possible to use
3101	functor objects without having to manually specify the C<operator ()> all	3482	functor objects without having to manually specify the C<operator ()> all
3102	the time. Incidentally, you can then also leave out the template argument	3483	the time. Incidentally, you can then also leave out the template argument
…		…
3135	Example: Use a plain function as callback.	3516	Example: Use a plain function as callback.
3136		3517
3137	static void io_cb (ev::io &w, int revents) { }	3518	static void io_cb (ev::io &w, int revents) { }
3138	iow.set <io_cb> ();	3519	iow.set <io_cb> ();
3139		3520
3140	=item w->set (struct ev_loop *)	3521	=item w->set (loop)
3141		3522
3142	Associates a different C<struct ev_loop> with this watcher. You can only	3523	Associates a different C<struct ev_loop> with this watcher. You can only
3143	do this when the watcher is inactive (and not pending either).	3524	do this when the watcher is inactive (and not pending either).
3144		3525
3145	=item w->set ([arguments])	3526	=item w->set ([arguments])
3146		3527
3147	Basically the same as C<ev_TYPE_set>, with the same arguments. Must be	3528	Basically the same as C<ev_TYPE_set>, with the same arguments. Either this
3148	called at least once. Unlike the C counterpart, an active watcher gets	3529	method or a suitable start method must be called at least once. Unlike the
3149	automatically stopped and restarted when reconfiguring it with this	3530	C counterpart, an active watcher gets automatically stopped and restarted
3150	method.	3531	when reconfiguring it with this method.
3151		3532
3152	=item w->start ()	3533	=item w->start ()
3153		3534
3154	Starts the watcher. Note that there is no C<loop> argument, as the	3535	Starts the watcher. Note that there is no C<loop> argument, as the
3155	constructor already stores the event loop.	3536	constructor already stores the event loop.
3156		3537
		3538	=item w->start ([arguments])
		3539
		3540	Instead of calling C<set> and C<start> methods separately, it is often
		3541	convenient to wrap them in one call. Uses the same type of arguments as
		3542	the configure C<set> method of the watcher.
		3543
3157	=item w->stop ()	3544	=item w->stop ()
3158		3545
3159	Stops the watcher if it is active. Again, no C<loop> argument.	3546	Stops the watcher if it is active. Again, no C<loop> argument.
3160		3547
3161	=item w->again () (C<ev::timer>, C<ev::periodic> only)	3548	=item w->again () (C<ev::timer>, C<ev::periodic> only)
…		…
3173		3560
3174	=back	3561	=back
3175		3562
3176	=back	3563	=back
3177		3564
3178	Example: Define a class with an IO and idle watcher, start one of them in	3565	Example: Define a class with two I/O and idle watchers, start the I/O
3179	the constructor.	3566	watchers in the constructor.
3180		3567
3181	class myclass	3568	class myclass
3182	{	3569	{
3183	ev::io io ; void io_cb (ev::io &w, int revents);	3570	ev::io io ; void io_cb (ev::io &w, int revents);
		3571	ev::io2 io2 ; void io2_cb (ev::io &w, int revents);
3184	ev::idle idle; void idle_cb (ev::idle &w, int revents);	3572	ev::idle idle; void idle_cb (ev::idle &w, int revents);
3185		3573
3186	myclass (int fd)	3574	myclass (int fd)
3187	{	3575	{
3188	io .set <myclass, &myclass::io_cb > (this);	3576	io .set <myclass, &myclass::io_cb > (this);
		3577	io2 .set <myclass, &myclass::io2_cb > (this);
3189	idle.set <myclass, &myclass::idle_cb> (this);	3578	idle.set <myclass, &myclass::idle_cb> (this);
3190		3579
3191	io.start (fd, ev::READ);	3580	io.set (fd, ev::WRITE); // configure the watcher
		3581	io.start (); // start it whenever convenient
		3582
		3583	io2.start (fd, ev::READ); // set + start in one call
3192	}	3584	}
3193	};	3585	};
3194		3586
3195		3587
3196	=head1 OTHER LANGUAGE BINDINGS	3588	=head1 OTHER LANGUAGE BINDINGS
…		…
3242	=item Ocaml	3634	=item Ocaml
3243		3635
3244	Erkki Seppala has written Ocaml bindings for libev, to be found at	3636	Erkki Seppala has written Ocaml bindings for libev, to be found at
3245	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.	3637	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.
3246		3638
		3639	=item Lua
		3640
		3641	Brian Maher has written a partial interface to libev for lua (at the
		3642	time of this writing, only C<ev_io> and C<ev_timer>), to be found at
		3643	L<http://github.com/brimworks/lua-ev>.
		3644
3247	=back	3645	=back
3248		3646
3249		3647
3250	=head1 MACRO MAGIC	3648	=head1 MACRO MAGIC
3251		3649
…		…
3264	loop argument"). The C<EV_A> form is used when this is the sole argument,	3662	loop argument"). The C<EV_A> form is used when this is the sole argument,
3265	C<EV_A_> is used when other arguments are following. Example:	3663	C<EV_A_> is used when other arguments are following. Example:
3266		3664
3267	ev_unref (EV_A);	3665	ev_unref (EV_A);
3268	ev_timer_add (EV_A_ watcher);	3666	ev_timer_add (EV_A_ watcher);
3269	ev_loop (EV_A_ 0);	3667	ev_run (EV_A_ 0);
3270		3668
3271	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,	3669	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
3272	which is often provided by the following macro.	3670	which is often provided by the following macro.
3273		3671
3274	=item C<EV_P>, C<EV_P_>	3672	=item C<EV_P>, C<EV_P_>
…		…
3314	}	3712	}
3315		3713
3316	ev_check check;	3714	ev_check check;
3317	ev_check_init (&check, check_cb);	3715	ev_check_init (&check, check_cb);
3318	ev_check_start (EV_DEFAULT_ &check);	3716	ev_check_start (EV_DEFAULT_ &check);
3319	ev_loop (EV_DEFAULT_ 0);	3717	ev_run (EV_DEFAULT_ 0);
3320		3718
3321	=head1 EMBEDDING	3719	=head1 EMBEDDING
3322		3720
3323	Libev can (and often is) directly embedded into host	3721	Libev can (and often is) directly embedded into host
3324	applications. Examples of applications that embed it include the Deliantra	3722	applications. Examples of applications that embed it include the Deliantra
…		…
3404	libev.m4	3802	libev.m4
3405		3803
3406	=head2 PREPROCESSOR SYMBOLS/MACROS	3804	=head2 PREPROCESSOR SYMBOLS/MACROS
3407		3805
3408	Libev can be configured via a variety of preprocessor symbols you have to	3806	Libev can be configured via a variety of preprocessor symbols you have to
3409	define before including any of its files. The default in the absence of	3807	define before including (or compiling) any of its files. The default in
3410	autoconf is documented for every option.	3808	the absence of autoconf is documented for every option.
		3809
		3810	Symbols marked with "(h)" do not change the ABI, and can have different
		3811	values when compiling libev vs. including F<ev.h>, so it is permissible
		3812	to redefine them before including F<ev.h> without breaking compatibility
		3813	to a compiled library. All other symbols change the ABI, which means all
		3814	users of libev and the libev code itself must be compiled with compatible
		3815	settings.
3411		3816
3412	=over 4	3817	=over 4
3413		3818
		3819	=item EV_COMPAT3 (h)
		3820
		3821	Backwards compatibility is a major concern for libev. This is why this
		3822	release of libev comes with wrappers for the functions and symbols that
		3823	have been renamed between libev version 3 and 4.
		3824
		3825	You can disable these wrappers (to test compatibility with future
		3826	versions) by defining C<EV_COMPAT3> to C<0> when compiling your
		3827	sources. This has the additional advantage that you can drop the C<struct>
		3828	from C<struct ev_loop> declarations, as libev will provide an C<ev_loop>
		3829	typedef in that case.
		3830
		3831	In some future version, the default for C<EV_COMPAT3> will become C<0>,
		3832	and in some even more future version the compatibility code will be
		3833	removed completely.
		3834
3414	=item EV_STANDALONE	3835	=item EV_STANDALONE (h)
3415		3836
3416	Must always be C<1> if you do not use autoconf configuration, which	3837	Must always be C<1> if you do not use autoconf configuration, which
3417	keeps libev from including F<config.h>, and it also defines dummy	3838	keeps libev from including F<config.h>, and it also defines dummy
3418	implementations for some libevent functions (such as logging, which is not	3839	implementations for some libevent functions (such as logging, which is not
3419	supported). It will also not define any of the structs usually found in	3840	supported). It will also not define any of the structs usually found in
3420	F<event.h> that are not directly supported by the libev core alone.	3841	F<event.h> that are not directly supported by the libev core alone.
3421		3842
3422	In stanbdalone mode, libev will still try to automatically deduce the	3843	In standalone mode, libev will still try to automatically deduce the
3423	configuration, but has to be more conservative.	3844	configuration, but has to be more conservative.
3424		3845
3425	=item EV_USE_MONOTONIC	3846	=item EV_USE_MONOTONIC
3426		3847
3427	If defined to be C<1>, libev will try to detect the availability of the	3848	If defined to be C<1>, libev will try to detect the availability of the
…		…
3492	be used is the winsock select). This means that it will call	3913	be used is the winsock select). This means that it will call
3493	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	3914	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
3494	it is assumed that all these functions actually work on fds, even	3915	it is assumed that all these functions actually work on fds, even
3495	on win32. Should not be defined on non-win32 platforms.	3916	on win32. Should not be defined on non-win32 platforms.
3496		3917
3497	=item EV_FD_TO_WIN32_HANDLE	3918	=item EV_FD_TO_WIN32_HANDLE(fd)
3498		3919
3499	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map	3920	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
3500	file descriptors to socket handles. When not defining this symbol (the	3921	file descriptors to socket handles. When not defining this symbol (the
3501	default), then libev will call C<_get_osfhandle>, which is usually	3922	default), then libev will call C<_get_osfhandle>, which is usually
3502	correct. In some cases, programs use their own file descriptor management,	3923	correct. In some cases, programs use their own file descriptor management,
3503	in which case they can provide this function to map fds to socket handles.	3924	in which case they can provide this function to map fds to socket handles.
		3925
		3926	=item EV_WIN32_HANDLE_TO_FD(handle)
		3927
		3928	If C<EV_SELECT_IS_WINSOCKET> then libev maps handles to file descriptors
		3929	using the standard C<_open_osfhandle> function. For programs implementing
		3930	their own fd to handle mapping, overwriting this function makes it easier
		3931	to do so. This can be done by defining this macro to an appropriate value.
		3932
		3933	=item EV_WIN32_CLOSE_FD(fd)
		3934
		3935	If programs implement their own fd to handle mapping on win32, then this
		3936	macro can be used to override the C<close> function, useful to unregister
		3937	file descriptors again. Note that the replacement function has to close
		3938	the underlying OS handle.
3504		3939
3505	=item EV_USE_POLL	3940	=item EV_USE_POLL
3506		3941
3507	If defined to be C<1>, libev will compile in support for the C<poll>(2)	3942	If defined to be C<1>, libev will compile in support for the C<poll>(2)
3508	backend. Otherwise it will be enabled on non-win32 platforms. It	3943	backend. Otherwise it will be enabled on non-win32 platforms. It
…		…
3555	as well as for signal and thread safety in C<ev_async> watchers.	3990	as well as for signal and thread safety in C<ev_async> watchers.
3556		3991
3557	In the absence of this define, libev will use C<sig_atomic_t volatile>	3992	In the absence of this define, libev will use C<sig_atomic_t volatile>
3558	(from F<signal.h>), which is usually good enough on most platforms.	3993	(from F<signal.h>), which is usually good enough on most platforms.
3559		3994
3560	=item EV_H	3995	=item EV_H (h)
3561		3996
3562	The name of the F<ev.h> header file used to include it. The default if	3997	The name of the F<ev.h> header file used to include it. The default if
3563	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be	3998	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
3564	used to virtually rename the F<ev.h> header file in case of conflicts.	3999	used to virtually rename the F<ev.h> header file in case of conflicts.
3565		4000
3566	=item EV_CONFIG_H	4001	=item EV_CONFIG_H (h)
3567		4002
3568	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	4003	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
3569	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	4004	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
3570	C<EV_H>, above.	4005	C<EV_H>, above.
3571		4006
3572	=item EV_EVENT_H	4007	=item EV_EVENT_H (h)
3573		4008
3574	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	4009	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
3575	of how the F<event.h> header can be found, the default is C<"event.h">.	4010	of how the F<event.h> header can be found, the default is C<"event.h">.
3576		4011
3577	=item EV_PROTOTYPES	4012	=item EV_PROTOTYPES (h)
3578		4013
3579	If defined to be C<0>, then F<ev.h> will not define any function	4014	If defined to be C<0>, then F<ev.h> will not define any function
3580	prototypes, but still define all the structs and other symbols. This is	4015	prototypes, but still define all the structs and other symbols. This is
3581	occasionally useful if you want to provide your own wrapper functions	4016	occasionally useful if you want to provide your own wrapper functions
3582	around libev functions.	4017	around libev functions.
…		…
3604	fine.	4039	fine.
3605		4040
3606	If your embedding application does not need any priorities, defining these	4041	If your embedding application does not need any priorities, defining these
3607	both to C<0> will save some memory and CPU.	4042	both to C<0> will save some memory and CPU.
3608		4043
3609	=item EV_PERIODIC_ENABLE	4044	=item EV_PERIODIC_ENABLE, EV_IDLE_ENABLE, EV_EMBED_ENABLE, EV_STAT_ENABLE,
		4045	EV_PREPARE_ENABLE, EV_CHECK_ENABLE, EV_FORK_ENABLE, EV_SIGNAL_ENABLE,
		4046	EV_ASYNC_ENABLE, EV_CHILD_ENABLE.
3610		4047
3611	If undefined or defined to be C<1>, then periodic timers are supported. If	4048	If undefined or defined to be C<1> (and the platform supports it), then
3612	defined to be C<0>, then they are not. Disabling them saves a few kB of	4049	the respective watcher type is supported. If defined to be C<0>, then it
3613	code.	4050	is not. Disabling watcher types mainly saves code size.
3614		4051
3615	=item EV_IDLE_ENABLE	4052	=item EV_FEATURES
3616
3617	If undefined or defined to be C<1>, then idle watchers are supported. If
3618	defined to be C<0>, then they are not. Disabling them saves a few kB of
3619	code.
3620
3621	=item EV_EMBED_ENABLE
3622
3623	If undefined or defined to be C<1>, then embed watchers are supported. If
3624	defined to be C<0>, then they are not. Embed watchers rely on most other
3625	watcher types, which therefore must not be disabled.
3626
3627	=item EV_STAT_ENABLE
3628
3629	If undefined or defined to be C<1>, then stat watchers are supported. If
3630	defined to be C<0>, then they are not.
3631
3632	=item EV_FORK_ENABLE
3633
3634	If undefined or defined to be C<1>, then fork watchers are supported. If
3635	defined to be C<0>, then they are not.
3636
3637	=item EV_ASYNC_ENABLE
3638
3639	If undefined or defined to be C<1>, then async watchers are supported. If
3640	defined to be C<0>, then they are not.
3641
3642	=item EV_MINIMAL
3643		4053
3644	If you need to shave off some kilobytes of code at the expense of some	4054	If you need to shave off some kilobytes of code at the expense of some
3645	speed, define this symbol to C<1>. Currently this is used to override some	4055	speed (but with the full API), you can define this symbol to request
3646	inlining decisions, saves roughly 30% code size on amd64. It also selects a	4056	certain subsets of functionality. The default is to enable all features
3647	much smaller 2-heap for timer management over the default 4-heap.	4057	that can be enabled on the platform.
		4058
		4059	A typical way to use this symbol is to define it to C<0> (or to a bitset
		4060	with some broad features you want) and then selectively re-enable
		4061	additional parts you want, for example if you want everything minimal,
		4062	but multiple event loop support, async and child watchers and the poll
		4063	backend, use this:
		4064
		4065	#define EV_FEATURES 0
		4066	#define EV_MULTIPLICITY 1
		4067	#define EV_USE_POLL 1
		4068	#define EV_CHILD_ENABLE 1
		4069	#define EV_ASYNC_ENABLE 1
		4070
		4071	The actual value is a bitset, it can be a combination of the following
		4072	values:
		4073
		4074	=over 4
		4075
		4076	=item C<1> - faster/larger code
		4077
		4078	Use larger code to speed up some operations.
		4079
		4080	Currently this is used to override some inlining decisions (enlarging the
		4081	code size by roughly 30% on amd64).
		4082
		4083	When optimising for size, use of compiler flags such as C<-Os> with
		4084	gcc is recommended, as well as C<-DNDEBUG>, as libev contains a number of
		4085	assertions.
		4086
		4087	=item C<2> - faster/larger data structures
		4088
		4089	Replaces the small 2-heap for timer management by a faster 4-heap, larger
		4090	hash table sizes and so on. This will usually further increase code size
		4091	and can additionally have an effect on the size of data structures at
		4092	runtime.
		4093
		4094	=item C<4> - full API configuration
		4095
		4096	This enables priorities (sets C<EV_MAXPRI>=2 and C<EV_MINPRI>=-2), and
		4097	enables multiplicity (C<EV_MULTIPLICITY>=1).
		4098
		4099	=item C<8> - full API
		4100
		4101	This enables a lot of the "lesser used" API functions. See C<ev.h> for
		4102	details on which parts of the API are still available without this
		4103	feature, and do not complain if this subset changes over time.
		4104
		4105	=item C<16> - enable all optional watcher types
		4106
		4107	Enables all optional watcher types. If you want to selectively enable
		4108	only some watcher types other than I/O and timers (e.g. prepare,
		4109	embed, async, child...) you can enable them manually by defining
		4110	C<EV_watchertype_ENABLE> to C<1> instead.
		4111
		4112	=item C<32> - enable all backends
		4113
		4114	This enables all backends - without this feature, you need to enable at
		4115	least one backend manually (C<EV_USE_SELECT> is a good choice).
		4116
		4117	=item C<64> - enable OS-specific "helper" APIs
		4118
		4119	Enable inotify, eventfd, signalfd and similar OS-specific helper APIs by
		4120	default.
		4121
		4122	=back
		4123
		4124	Compiling with C<gcc -Os -DEV_STANDALONE -DEV_USE_EPOLL=1 -DEV_FEATURES=0>
		4125	reduces the compiled size of libev from 24.7Kb code/2.8Kb data to 6.5Kb
		4126	code/0.3Kb data on my GNU/Linux amd64 system, while still giving you I/O
		4127	watchers, timers and monotonic clock support.
		4128
		4129	With an intelligent-enough linker (gcc+binutils are intelligent enough
		4130	when you use C<-Wl,--gc-sections -ffunction-sections>) functions unused by
		4131	your program might be left out as well - a binary starting a timer and an
		4132	I/O watcher then might come out at only 5Kb.
		4133
		4134	=item EV_AVOID_STDIO
		4135
		4136	If this is set to C<1> at compiletime, then libev will avoid using stdio
		4137	functions (printf, scanf, perror etc.). This will increase the code size
		4138	somewhat, but if your program doesn't otherwise depend on stdio and your
		4139	libc allows it, this avoids linking in the stdio library which is quite
		4140	big.
		4141
		4142	Note that error messages might become less precise when this option is
		4143	enabled.
		4144
		4145	=item EV_NSIG
		4146
		4147	The highest supported signal number, +1 (or, the number of
		4148	signals): Normally, libev tries to deduce the maximum number of signals
		4149	automatically, but sometimes this fails, in which case it can be
		4150	specified. Also, using a lower number than detected (C<32> should be
		4151	good for about any system in existence) can save some memory, as libev
		4152	statically allocates some 12-24 bytes per signal number.
3648		4153
3649	=item EV_PID_HASHSIZE	4154	=item EV_PID_HASHSIZE
3650		4155
3651	C<ev_child> watchers use a small hash table to distribute workload by	4156	C<ev_child> watchers use a small hash table to distribute workload by
3652	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	4157	pid. The default size is C<16> (or C<1> with C<EV_FEATURES> disabled),
3653	than enough. If you need to manage thousands of children you might want to	4158	usually more than enough. If you need to manage thousands of children you
3654	increase this value (I<must> be a power of two).	4159	might want to increase this value (I<must> be a power of two).
3655		4160
3656	=item EV_INOTIFY_HASHSIZE	4161	=item EV_INOTIFY_HASHSIZE
3657		4162
3658	C<ev_stat> watchers use a small hash table to distribute workload by	4163	C<ev_stat> watchers use a small hash table to distribute workload by
3659	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	4164	inotify watch id. The default size is C<16> (or C<1> with C<EV_FEATURES>
3660	usually more than enough. If you need to manage thousands of C<ev_stat>	4165	disabled), usually more than enough. If you need to manage thousands of
3661	watchers you might want to increase this value (I<must> be a power of	4166	C<ev_stat> watchers you might want to increase this value (I<must> be a
3662	two).	4167	power of two).
3663		4168
3664	=item EV_USE_4HEAP	4169	=item EV_USE_4HEAP
3665		4170
3666	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4171	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3667	timer and periodics heaps, libev uses a 4-heap when this symbol is defined	4172	timer and periodics heaps, libev uses a 4-heap when this symbol is defined
3668	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably	4173	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably
3669	faster performance with many (thousands) of watchers.	4174	faster performance with many (thousands) of watchers.
3670		4175
3671	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4176	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3672	(disabled).	4177	will be C<0>.
3673		4178
3674	=item EV_HEAP_CACHE_AT	4179	=item EV_HEAP_CACHE_AT
3675		4180
3676	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4181	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3677	timer and periodics heaps, libev can cache the timestamp (I<at>) within	4182	timer and periodics heaps, libev can cache the timestamp (I<at>) within
3678	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),	4183	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
3679	which uses 8-12 bytes more per watcher and a few hundred bytes more code,	4184	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
3680	but avoids random read accesses on heap changes. This improves performance	4185	but avoids random read accesses on heap changes. This improves performance
3681	noticeably with many (hundreds) of watchers.	4186	noticeably with many (hundreds) of watchers.
3682		4187
3683	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4188	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3684	(disabled).	4189	will be C<0>.
3685		4190
3686	=item EV_VERIFY	4191	=item EV_VERIFY
3687		4192
3688	Controls how much internal verification (see C<ev_loop_verify ()>) will	4193	Controls how much internal verification (see C<ev_verify ()>) will
3689	be done: If set to C<0>, no internal verification code will be compiled	4194	be done: If set to C<0>, no internal verification code will be compiled
3690	in. If set to C<1>, then verification code will be compiled in, but not	4195	in. If set to C<1>, then verification code will be compiled in, but not
3691	called. If set to C<2>, then the internal verification code will be	4196	called. If set to C<2>, then the internal verification code will be
3692	called once per loop, which can slow down libev. If set to C<3>, then the	4197	called once per loop, which can slow down libev. If set to C<3>, then the
3693	verification code will be called very frequently, which will slow down	4198	verification code will be called very frequently, which will slow down
3694	libev considerably.	4199	libev considerably.
3695		4200
3696	The default is C<1>, unless C<EV_MINIMAL> is set, in which case it will be	4201	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3697	C<0>.	4202	will be C<0>.
3698		4203
3699	=item EV_COMMON	4204	=item EV_COMMON
3700		4205
3701	By default, all watchers have a C<void *data> member. By redefining	4206	By default, all watchers have a C<void *data> member. By redefining
3702	this macro to a something else you can include more and other types of	4207	this macro to something else you can include more and other types of
3703	members. You have to define it each time you include one of the files,	4208	members. You have to define it each time you include one of the files,
3704	though, and it must be identical each time.	4209	though, and it must be identical each time.
3705		4210
3706	For example, the perl EV module uses something like this:	4211	For example, the perl EV module uses something like this:
3707		4212
…		…
3760	file.	4265	file.
3761		4266
3762	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	4267	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
3763	that everybody includes and which overrides some configure choices:	4268	that everybody includes and which overrides some configure choices:
3764		4269
3765	#define EV_MINIMAL 1	4270	#define EV_FEATURES 8
3766	#define EV_USE_POLL 0	4271	#define EV_USE_SELECT 1
3767	#define EV_MULTIPLICITY 0
3768	#define EV_PERIODIC_ENABLE 0	4272	#define EV_PREPARE_ENABLE 1
		4273	#define EV_IDLE_ENABLE 1
3769	#define EV_STAT_ENABLE 0	4274	#define EV_SIGNAL_ENABLE 1
3770	#define EV_FORK_ENABLE 0	4275	#define EV_CHILD_ENABLE 1
		4276	#define EV_USE_STDEXCEPT 0
3771	#define EV_CONFIG_H <config.h>	4277	#define EV_CONFIG_H <config.h>
3772	#define EV_MINPRI 0
3773	#define EV_MAXPRI 0
3774		4278
3775	#include "ev++.h"	4279	#include "ev++.h"
3776		4280
3777	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	4281	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
3778		4282
…		…
3838	default loop and triggering an C<ev_async> watcher from the default loop	4342	default loop and triggering an C<ev_async> watcher from the default loop
3839	watcher callback into the event loop interested in the signal.	4343	watcher callback into the event loop interested in the signal.
3840		4344
3841	=back	4345	=back
3842		4346
		4347	=head4 THREAD LOCKING EXAMPLE
		4348
		4349	Here is a fictitious example of how to run an event loop in a different
		4350	thread than where callbacks are being invoked and watchers are
		4351	created/added/removed.
		4352
		4353	For a real-world example, see the C<EV::Loop::Async> perl module,
		4354	which uses exactly this technique (which is suited for many high-level
		4355	languages).
		4356
		4357	The example uses a pthread mutex to protect the loop data, a condition
		4358	variable to wait for callback invocations, an async watcher to notify the
		4359	event loop thread and an unspecified mechanism to wake up the main thread.
		4360
		4361	First, you need to associate some data with the event loop:
		4362
		4363	typedef struct {
		4364	mutex_t lock; /* global loop lock */
		4365	ev_async async_w;
		4366	thread_t tid;
		4367	cond_t invoke_cv;
		4368	} userdata;
		4369
		4370	void prepare_loop (EV_P)
		4371	{
		4372	// for simplicity, we use a static userdata struct.
		4373	static userdata u;
		4374
		4375	ev_async_init (&u->async_w, async_cb);
		4376	ev_async_start (EV_A_ &u->async_w);
		4377
		4378	pthread_mutex_init (&u->lock, 0);
		4379	pthread_cond_init (&u->invoke_cv, 0);
		4380
		4381	// now associate this with the loop
		4382	ev_set_userdata (EV_A_ u);
		4383	ev_set_invoke_pending_cb (EV_A_ l_invoke);
		4384	ev_set_loop_release_cb (EV_A_ l_release, l_acquire);
		4385
		4386	// then create the thread running ev_loop
		4387	pthread_create (&u->tid, 0, l_run, EV_A);
		4388	}
		4389
		4390	The callback for the C<ev_async> watcher does nothing: the watcher is used
		4391	solely to wake up the event loop so it takes notice of any new watchers
		4392	that might have been added:
		4393
		4394	static void
		4395	async_cb (EV_P_ ev_async *w, int revents)
		4396	{
		4397	// just used for the side effects
		4398	}
		4399
		4400	The C<l_release> and C<l_acquire> callbacks simply unlock/lock the mutex
		4401	protecting the loop data, respectively.
		4402
		4403	static void
		4404	l_release (EV_P)
		4405	{
		4406	userdata *u = ev_userdata (EV_A);
		4407	pthread_mutex_unlock (&u->lock);
		4408	}
		4409
		4410	static void
		4411	l_acquire (EV_P)
		4412	{
		4413	userdata *u = ev_userdata (EV_A);
		4414	pthread_mutex_lock (&u->lock);
		4415	}
		4416
		4417	The event loop thread first acquires the mutex, and then jumps straight
		4418	into C<ev_run>:
		4419
		4420	void *
		4421	l_run (void *thr_arg)
		4422	{
		4423	struct ev_loop *loop = (struct ev_loop *)thr_arg;
		4424
		4425	l_acquire (EV_A);
		4426	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
		4427	ev_run (EV_A_ 0);
		4428	l_release (EV_A);
		4429
		4430	return 0;
		4431	}
		4432
		4433	Instead of invoking all pending watchers, the C<l_invoke> callback will
		4434	signal the main thread via some unspecified mechanism (signals? pipe
		4435	writes? C<Async::Interrupt>?) and then waits until all pending watchers
		4436	have been called (in a while loop because a) spurious wakeups are possible
		4437	and b) skipping inter-thread-communication when there are no pending
		4438	watchers is very beneficial):
		4439
		4440	static void
		4441	l_invoke (EV_P)
		4442	{
		4443	userdata *u = ev_userdata (EV_A);
		4444
		4445	while (ev_pending_count (EV_A))
		4446	{
		4447	wake_up_other_thread_in_some_magic_or_not_so_magic_way ();
		4448	pthread_cond_wait (&u->invoke_cv, &u->lock);
		4449	}
		4450	}
		4451
		4452	Now, whenever the main thread gets told to invoke pending watchers, it
		4453	will grab the lock, call C<ev_invoke_pending> and then signal the loop
		4454	thread to continue:
		4455
		4456	static void
		4457	real_invoke_pending (EV_P)
		4458	{
		4459	userdata *u = ev_userdata (EV_A);
		4460
		4461	pthread_mutex_lock (&u->lock);
		4462	ev_invoke_pending (EV_A);
		4463	pthread_cond_signal (&u->invoke_cv);
		4464	pthread_mutex_unlock (&u->lock);
		4465	}
		4466
		4467	Whenever you want to start/stop a watcher or do other modifications to an
		4468	event loop, you will now have to lock:
		4469
		4470	ev_timer timeout_watcher;
		4471	userdata *u = ev_userdata (EV_A);
		4472
		4473	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
		4474
		4475	pthread_mutex_lock (&u->lock);
		4476	ev_timer_start (EV_A_ &timeout_watcher);
		4477	ev_async_send (EV_A_ &u->async_w);
		4478	pthread_mutex_unlock (&u->lock);
		4479
		4480	Note that sending the C<ev_async> watcher is required because otherwise
		4481	an event loop currently blocking in the kernel will have no knowledge
		4482	about the newly added timer. By waking up the loop it will pick up any new
		4483	watchers in the next event loop iteration.
		4484
3843	=head3 COROUTINES	4485	=head3 COROUTINES
3844		4486
3845	Libev is very accommodating to coroutines ("cooperative threads"):	4487	Libev is very accommodating to coroutines ("cooperative threads"):
3846	libev fully supports nesting calls to its functions from different	4488	libev fully supports nesting calls to its functions from different
3847	coroutines (e.g. you can call C<ev_loop> on the same loop from two	4489	coroutines (e.g. you can call C<ev_run> on the same loop from two
3848	different coroutines, and switch freely between both coroutines running the	4490	different coroutines, and switch freely between both coroutines running
3849	loop, as long as you don't confuse yourself). The only exception is that	4491	the loop, as long as you don't confuse yourself). The only exception is
3850	you must not do this from C<ev_periodic> reschedule callbacks.	4492	that you must not do this from C<ev_periodic> reschedule callbacks.
3851		4493
3852	Care has been taken to ensure that libev does not keep local state inside	4494	Care has been taken to ensure that libev does not keep local state inside
3853	C<ev_loop>, and other calls do not usually allow for coroutine switches as	4495	C<ev_run>, and other calls do not usually allow for coroutine switches as
3854	they do not call any callbacks.	4496	they do not call any callbacks.
3855		4497
3856	=head2 COMPILER WARNINGS	4498	=head2 COMPILER WARNINGS
3857		4499
3858	Depending on your compiler and compiler settings, you might get no or a	4500	Depending on your compiler and compiler settings, you might get no or a
…		…
3869	maintainable.	4511	maintainable.
3870		4512
3871	And of course, some compiler warnings are just plain stupid, or simply	4513	And of course, some compiler warnings are just plain stupid, or simply
3872	wrong (because they don't actually warn about the condition their message	4514	wrong (because they don't actually warn about the condition their message
3873	seems to warn about). For example, certain older gcc versions had some	4515	seems to warn about). For example, certain older gcc versions had some
3874	warnings that resulted an extreme number of false positives. These have	4516	warnings that resulted in an extreme number of false positives. These have
3875	been fixed, but some people still insist on making code warn-free with	4517	been fixed, but some people still insist on making code warn-free with
3876	such buggy versions.	4518	such buggy versions.
3877		4519
3878	While libev is written to generate as few warnings as possible,	4520	While libev is written to generate as few warnings as possible,
3879	"warn-free" code is not a goal, and it is recommended not to build libev	4521	"warn-free" code is not a goal, and it is recommended not to build libev
…		…
3915	I suggest using suppression lists.	4557	I suggest using suppression lists.
3916		4558
3917		4559
3918	=head1 PORTABILITY NOTES	4560	=head1 PORTABILITY NOTES
3919		4561
		4562	=head2 GNU/LINUX 32 BIT LIMITATIONS
		4563
		4564	GNU/Linux is the only common platform that supports 64 bit file/large file
		4565	interfaces but I<disables> them by default.
		4566
		4567	That means that libev compiled in the default environment doesn't support
		4568	files larger than 2GiB or so, which mainly affects C<ev_stat> watchers.
		4569
		4570	Unfortunately, many programs try to work around this GNU/Linux issue
		4571	by enabling the large file API, which makes them incompatible with the
		4572	standard libev compiled for their system.
		4573
		4574	Likewise, libev cannot enable the large file API itself as this would
		4575	suddenly make it incompatible to the default compile time environment,
		4576	i.e. all programs not using special compile switches.
		4577
		4578	=head2 OS/X AND DARWIN BUGS
		4579
		4580	The whole thing is a bug if you ask me - basically any system interface
		4581	you touch is broken, whether it is locales, poll, kqueue or even the
		4582	OpenGL drivers.
		4583
		4584	=head3 C<kqueue> is buggy
		4585
		4586	The kqueue syscall is broken in all known versions - most versions support
		4587	only sockets, many support pipes.
		4588
		4589	Libev tries to work around this by not using C<kqueue> by default on this
		4590	rotten platform, but of course you can still ask for it when creating a
		4591	loop - embedding a socket-only kqueue loop into a select-based one is
		4592	probably going to work well.
		4593
		4594	=head3 C<poll> is buggy
		4595
		4596	Instead of fixing C<kqueue>, Apple replaced their (working) C<poll>
		4597	implementation by something calling C<kqueue> internally around the 10.5.6
		4598	release, so now C<kqueue> I<and> C<poll> are broken.
		4599
		4600	Libev tries to work around this by not using C<poll> by default on
		4601	this rotten platform, but of course you can still ask for it when creating
		4602	a loop.
		4603
		4604	=head3 C<select> is buggy
		4605
		4606	All that's left is C<select>, and of course Apple found a way to fuck this
		4607	one up as well: On OS/X, C<select> actively limits the number of file
		4608	descriptors you can pass in to 1024 - your program suddenly crashes when
		4609	you use more.
		4610
		4611	There is an undocumented "workaround" for this - defining
		4612	C<_DARWIN_UNLIMITED_SELECT>, which libev tries to use, so select I<should>
		4613	work on OS/X.
		4614
		4615	=head2 SOLARIS PROBLEMS AND WORKAROUNDS
		4616
		4617	=head3 C<errno> reentrancy
		4618
		4619	The default compile environment on Solaris is unfortunately so
		4620	thread-unsafe that you can't even use components/libraries compiled
		4621	without C<-D_REENTRANT> in a threaded program, which, of course, isn't
		4622	defined by default. A valid, if stupid, implementation choice.
		4623
		4624	If you want to use libev in threaded environments you have to make sure
		4625	it's compiled with C<_REENTRANT> defined.
		4626
		4627	=head3 Event port backend
		4628
		4629	The scalable event interface for Solaris is called "event
		4630	ports". Unfortunately, this mechanism is very buggy in all major
		4631	releases. If you run into high CPU usage, your program freezes or you get
		4632	a large number of spurious wakeups, make sure you have all the relevant
		4633	and latest kernel patches applied. No, I don't know which ones, but there
		4634	are multiple ones to apply, and afterwards, event ports actually work
		4635	great.
		4636
		4637	If you can't get it to work, you can try running the program by setting
		4638	the environment variable C<LIBEV_FLAGS=3> to only allow C<poll> and
		4639	C<select> backends.
		4640
		4641	=head2 AIX POLL BUG
		4642
		4643	AIX unfortunately has a broken C<poll.h> header. Libev works around
		4644	this by trying to avoid the poll backend altogether (i.e. it's not even
		4645	compiled in), which normally isn't a big problem as C<select> works fine
		4646	with large bitsets on AIX, and AIX is dead anyway.
		4647
3920	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS	4648	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
		4649
		4650	=head3 General issues
3921		4651
3922	Win32 doesn't support any of the standards (e.g. POSIX) that libev	4652	Win32 doesn't support any of the standards (e.g. POSIX) that libev
3923	requires, and its I/O model is fundamentally incompatible with the POSIX	4653	requires, and its I/O model is fundamentally incompatible with the POSIX
3924	model. Libev still offers limited functionality on this platform in	4654	model. Libev still offers limited functionality on this platform in
3925	the form of the C<EVBACKEND_SELECT> backend, and only supports socket	4655	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
3926	descriptors. This only applies when using Win32 natively, not when using	4656	descriptors. This only applies when using Win32 natively, not when using
3927	e.g. cygwin.	4657	e.g. cygwin. Actually, it only applies to the microsofts own compilers,
		4658	as every compielr comes with a slightly differently broken/incompatible
		4659	environment.
3928		4660
3929	Lifting these limitations would basically require the full	4661	Lifting these limitations would basically require the full
3930	re-implementation of the I/O system. If you are into these kinds of	4662	re-implementation of the I/O system. If you are into this kind of thing,
3931	things, then note that glib does exactly that for you in a very portable	4663	then note that glib does exactly that for you in a very portable way (note
3932	way (note also that glib is the slowest event library known to man).	4664	also that glib is the slowest event library known to man).
3933		4665
3934	There is no supported compilation method available on windows except	4666	There is no supported compilation method available on windows except
3935	embedding it into other applications.	4667	embedding it into other applications.
		4668
		4669	Sensible signal handling is officially unsupported by Microsoft - libev
		4670	tries its best, but under most conditions, signals will simply not work.
3936		4671
3937	Not a libev limitation but worth mentioning: windows apparently doesn't	4672	Not a libev limitation but worth mentioning: windows apparently doesn't
3938	accept large writes: instead of resulting in a partial write, windows will	4673	accept large writes: instead of resulting in a partial write, windows will
3939	either accept everything or return C<ENOBUFS> if the buffer is too large,	4674	either accept everything or return C<ENOBUFS> if the buffer is too large,
3940	so make sure you only write small amounts into your sockets (less than a	4675	so make sure you only write small amounts into your sockets (less than a
…		…
3945	the abysmal performance of winsockets, using a large number of sockets	4680	the abysmal performance of winsockets, using a large number of sockets
3946	is not recommended (and not reasonable). If your program needs to use	4681	is not recommended (and not reasonable). If your program needs to use
3947	more than a hundred or so sockets, then likely it needs to use a totally	4682	more than a hundred or so sockets, then likely it needs to use a totally
3948	different implementation for windows, as libev offers the POSIX readiness	4683	different implementation for windows, as libev offers the POSIX readiness
3949	notification model, which cannot be implemented efficiently on windows	4684	notification model, which cannot be implemented efficiently on windows
3950	(Microsoft monopoly games).	4685	(due to Microsoft monopoly games).
3951		4686
3952	A typical way to use libev under windows is to embed it (see the embedding	4687	A typical way to use libev under windows is to embed it (see the embedding
3953	section for details) and use the following F<evwrap.h> header file instead	4688	section for details) and use the following F<evwrap.h> header file instead
3954	of F<ev.h>:	4689	of F<ev.h>:
3955		4690
…		…
3962	you do I<not> compile the F<ev.c> or any other embedded source files!):	4697	you do I<not> compile the F<ev.c> or any other embedded source files!):
3963		4698
3964	#include "evwrap.h"	4699	#include "evwrap.h"
3965	#include "ev.c"	4700	#include "ev.c"
3966		4701
3967	=over 4
3968
3969	=item The winsocket select function	4702	=head3 The winsocket C<select> function
3970		4703
3971	The winsocket C<select> function doesn't follow POSIX in that it	4704	The winsocket C<select> function doesn't follow POSIX in that it
3972	requires socket I<handles> and not socket I<file descriptors> (it is	4705	requires socket I<handles> and not socket I<file descriptors> (it is
3973	also extremely buggy). This makes select very inefficient, and also	4706	also extremely buggy). This makes select very inefficient, and also
3974	requires a mapping from file descriptors to socket handles (the Microsoft	4707	requires a mapping from file descriptors to socket handles (the Microsoft
…		…
3983	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */	4716	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
3984		4717
3985	Note that winsockets handling of fd sets is O(n), so you can easily get a	4718	Note that winsockets handling of fd sets is O(n), so you can easily get a
3986	complexity in the O(n²) range when using win32.	4719	complexity in the O(n²) range when using win32.
3987		4720
3988	=item Limited number of file descriptors	4721	=head3 Limited number of file descriptors
3989		4722
3990	Windows has numerous arbitrary (and low) limits on things.	4723	Windows has numerous arbitrary (and low) limits on things.
3991		4724
3992	Early versions of winsocket's select only supported waiting for a maximum	4725	Early versions of winsocket's select only supported waiting for a maximum
3993	of C<64> handles (probably owning to the fact that all windows kernels	4726	of C<64> handles (probably owning to the fact that all windows kernels
3994	can only wait for C<64> things at the same time internally; Microsoft	4727	can only wait for C<64> things at the same time internally; Microsoft
3995	recommends spawning a chain of threads and wait for 63 handles and the	4728	recommends spawning a chain of threads and wait for 63 handles and the
3996	previous thread in each. Great).	4729	previous thread in each. Sounds great!).
3997		4730
3998	Newer versions support more handles, but you need to define C<FD_SETSIZE>	4731	Newer versions support more handles, but you need to define C<FD_SETSIZE>
3999	to some high number (e.g. C<2048>) before compiling the winsocket select	4732	to some high number (e.g. C<2048>) before compiling the winsocket select
4000	call (which might be in libev or elsewhere, for example, perl does its own	4733	call (which might be in libev or elsewhere, for example, perl and many
4001	select emulation on windows).	4734	other interpreters do their own select emulation on windows).
4002		4735
4003	Another limit is the number of file descriptors in the Microsoft runtime	4736	Another limit is the number of file descriptors in the Microsoft runtime
4004	libraries, which by default is C<64> (there must be a hidden I<64> fetish	4737	libraries, which by default is C<64> (there must be a hidden I<64>
4005	or something like this inside Microsoft). You can increase this by calling	4738	fetish or something like this inside Microsoft). You can increase this
4006	C<_setmaxstdio>, which can increase this limit to C<2048> (another	4739	by calling C<_setmaxstdio>, which can increase this limit to C<2048>
4007	arbitrary limit), but is broken in many versions of the Microsoft runtime	4740	(another arbitrary limit), but is broken in many versions of the Microsoft
4008	libraries.
4009
4010	This might get you to about C<512> or C<2048> sockets (depending on	4741	runtime libraries. This might get you to about C<512> or C<2048> sockets
4011	windows version and/or the phase of the moon). To get more, you need to	4742	(depending on windows version and/or the phase of the moon). To get more,
4012	wrap all I/O functions and provide your own fd management, but the cost of	4743	you need to wrap all I/O functions and provide your own fd management, but
4013	calling select (O(n²)) will likely make this unworkable.	4744	the cost of calling select (O(n²)) will likely make this unworkable.
4014
4015	=back
4016		4745
4017	=head2 PORTABILITY REQUIREMENTS	4746	=head2 PORTABILITY REQUIREMENTS
4018		4747
4019	In addition to a working ISO-C implementation and of course the	4748	In addition to a working ISO-C implementation and of course the
4020	backend-specific APIs, libev relies on a few additional extensions:	4749	backend-specific APIs, libev relies on a few additional extensions:
…		…
4059	watchers.	4788	watchers.
4060		4789
4061	=item C<double> must hold a time value in seconds with enough accuracy	4790	=item C<double> must hold a time value in seconds with enough accuracy
4062		4791
4063	The type C<double> is used to represent timestamps. It is required to	4792	The type C<double> is used to represent timestamps. It is required to
4064	have at least 51 bits of mantissa (and 9 bits of exponent), which is good	4793	have at least 51 bits of mantissa (and 9 bits of exponent), which is
4065	enough for at least into the year 4000. This requirement is fulfilled by	4794	good enough for at least into the year 4000 with millisecond accuracy
		4795	(the design goal for libev). This requirement is overfulfilled by
4066	implementations implementing IEEE 754 (basically all existing ones).	4796	implementations using IEEE 754, which is basically all existing ones. With
		4797	IEEE 754 doubles, you get microsecond accuracy until at least 2200.
4067		4798
4068	=back	4799	=back
4069		4800
4070	If you know of other additional requirements drop me a note.	4801	If you know of other additional requirements drop me a note.
4071		4802
…		…
4139	involves iterating over all running async watchers or all signal numbers.	4870	involves iterating over all running async watchers or all signal numbers.
4140		4871
4141	=back	4872	=back
4142		4873
4143		4874
		4875	=head1 PORTING FROM LIBEV 3.X TO 4.X
		4876
		4877	The major version 4 introduced some minor incompatible changes to the API.
		4878
		4879	At the moment, the C<ev.h> header file tries to implement superficial
		4880	compatibility, so most programs should still compile. Those might be
		4881	removed in later versions of libev, so better update early than late.
		4882
		4883	=over 4
		4884
		4885	=item C<ev_default_destroy> and C<ev_default_fork> have been removed
		4886
		4887	These calls can be replaced easily by their C<ev_loop_xxx> counterparts:
		4888
		4889	ev_loop_destroy (EV_DEFAULT_UC);
		4890	ev_loop_fork (EV_DEFAULT);
		4891
		4892	=item function/symbol renames
		4893
		4894	A number of functions and symbols have been renamed:
		4895
		4896	ev_loop => ev_run
		4897	EVLOOP_NONBLOCK => EVRUN_NOWAIT
		4898	EVLOOP_ONESHOT => EVRUN_ONCE
		4899
		4900	ev_unloop => ev_break
		4901	EVUNLOOP_CANCEL => EVBREAK_CANCEL
		4902	EVUNLOOP_ONE => EVBREAK_ONE
		4903	EVUNLOOP_ALL => EVBREAK_ALL
		4904
		4905	EV_TIMEOUT => EV_TIMER
		4906
		4907	ev_loop_count => ev_iteration
		4908	ev_loop_depth => ev_depth
		4909	ev_loop_verify => ev_verify
		4910
		4911	Most functions working on C<struct ev_loop> objects don't have an
		4912	C<ev_loop_> prefix, so it was removed; C<ev_loop>, C<ev_unloop> and
		4913	associated constants have been renamed to not collide with the C<struct
		4914	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme
		4915	as all other watcher types. Note that C<ev_loop_fork> is still called
		4916	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>
		4917	typedef.
		4918
		4919	=item C<EV_COMPAT3> backwards compatibility mechanism
		4920
		4921	The backward compatibility mechanism can be controlled by
		4922	C<EV_COMPAT3>. See L<PREPROCESSOR SYMBOLS/MACROS> in the L<EMBEDDING>
		4923	section.
		4924
		4925	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>
		4926
		4927	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different
		4928	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile
		4929	and work, but the library code will of course be larger.
		4930
		4931	=back
		4932
		4933
4144	=head1 GLOSSARY	4934	=head1 GLOSSARY
4145		4935
4146	=over 4	4936	=over 4
4147		4937
4148	=item active	4938	=item active
4149		4939
4150	A watcher is active as long as it has been started (has been attached to	4940	A watcher is active as long as it has been started and not yet stopped.
4151	an event loop) but not yet stopped (disassociated from the event loop).	4941	See L<WATCHER STATES> for details.
4152		4942
4153	=item application	4943	=item application
4154		4944
4155	In this document, an application is whatever is using libev.	4945	In this document, an application is whatever is using libev.
		4946
		4947	=item backend
		4948
		4949	The part of the code dealing with the operating system interfaces.
4156		4950
4157	=item callback	4951	=item callback
4158		4952
4159	The address of a function that is called when some event has been	4953	The address of a function that is called when some event has been
4160	detected. Callbacks are being passed the event loop, the watcher that	4954	detected. Callbacks are being passed the event loop, the watcher that
4161	received the event, and the actual event bitset.	4955	received the event, and the actual event bitset.
4162		4956
4163	=item callback invocation	4957	=item callback/watcher invocation
4164		4958
4165	The act of calling the callback associated with a watcher.	4959	The act of calling the callback associated with a watcher.
4166		4960
4167	=item event	4961	=item event
4168		4962
4169	A change of state of some external event, such as data now being available	4963	A change of state of some external event, such as data now being available
4170	for reading on a file descriptor, time having passed or simply not having	4964	for reading on a file descriptor, time having passed or simply not having
4171	any other events happening anymore.	4965	any other events happening anymore.
4172		4966
4173	In libev, events are represented as single bits (such as C<EV_READ> or	4967	In libev, events are represented as single bits (such as C<EV_READ> or
4174	C<EV_TIMEOUT>).	4968	C<EV_TIMER>).
4175		4969
4176	=item event library	4970	=item event library
4177		4971
4178	A software package implementing an event model and loop.	4972	A software package implementing an event model and loop.
4179		4973
…		…
4187	The model used to describe how an event loop handles and processes	4981	The model used to describe how an event loop handles and processes
4188	watchers and events.	4982	watchers and events.
4189		4983
4190	=item pending	4984	=item pending
4191		4985
4192	A watcher is pending as soon as the corresponding event has been detected,	4986	A watcher is pending as soon as the corresponding event has been
4193	and stops being pending as soon as the watcher will be invoked or its	4987	detected. See L<WATCHER STATES> for details.
4194	pending status is explicitly cleared by the application.
4195
4196	A watcher can be pending, but not active. Stopping a watcher also clears
4197	its pending status.
4198		4988
4199	=item real time	4989	=item real time
4200		4990
4201	The physical time that is observed. It is apparently strictly monotonic :)	4991	The physical time that is observed. It is apparently strictly monotonic :)
4202		4992
…		…
4209	=item watcher	4999	=item watcher
4210		5000
4211	A data structure that describes interest in certain events. Watchers need	5001	A data structure that describes interest in certain events. Watchers need
4212	to be started (attached to an event loop) before they can receive events.	5002	to be started (attached to an event loop) before they can receive events.
4213		5003
4214	=item watcher invocation
4215
4216	The act of calling the callback associated with a watcher.
4217
4218	=back	5004	=back
4219		5005
4220	=head1 AUTHOR	5006	=head1 AUTHOR
4221		5007
4222	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael Magnusson.	5008	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael Magnusson.

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines