ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.263 by root, Mon Jul 27 01:10:17 2009 UTC vs.
Revision 1.327 by root, Sun Oct 24 20:05:43 2010 UTC

…		…
26	puts ("stdin ready");	26	puts ("stdin ready");
27	// for one-shot events, one must manually stop the watcher	27	// for one-shot events, one must manually stop the watcher
28	// with its corresponding stop function.	28	// with its corresponding stop function.
29	ev_io_stop (EV_A_ w);	29	ev_io_stop (EV_A_ w);
30		30
31	// this causes all nested ev_loop's to stop iterating	31	// this causes all nested ev_run's to stop iterating
32	ev_unloop (EV_A_ EVUNLOOP_ALL);	32	ev_break (EV_A_ EVBREAK_ALL);
33	}	33	}
34		34
35	// another callback, this time for a time-out	35	// another callback, this time for a time-out
36	static void	36	static void
37	timeout_cb (EV_P_ ev_timer *w, int revents)	37	timeout_cb (EV_P_ ev_timer *w, int revents)
38	{	38	{
39	puts ("timeout");	39	puts ("timeout");
40	// this causes the innermost ev_loop to stop iterating	40	// this causes the innermost ev_run to stop iterating
41	ev_unloop (EV_A_ EVUNLOOP_ONE);	41	ev_break (EV_A_ EVBREAK_ONE);
42	}	42	}
43		43
44	int	44	int
45	main (void)	45	main (void)
46	{	46	{
47	// use the default event loop unless you have special needs	47	// use the default event loop unless you have special needs
48	struct ev_loop *loop = ev_default_loop (0);	48	struct ev_loop *loop = EV_DEFAULT;
49		49
50	// initialise an io watcher, then start it	50	// initialise an io watcher, then start it
51	// this one will watch for stdin to become readable	51	// this one will watch for stdin to become readable
52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
53	ev_io_start (loop, &stdin_watcher);	53	ev_io_start (loop, &stdin_watcher);
…		…
56	// simple non-repeating 5.5 second timeout	56	// simple non-repeating 5.5 second timeout
57	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	57	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
58	ev_timer_start (loop, &timeout_watcher);	58	ev_timer_start (loop, &timeout_watcher);
59		59
60	// now wait for events to arrive	60	// now wait for events to arrive
61	ev_loop (loop, 0);	61	ev_run (loop, 0);
62		62
63	// unloop was called, so exit	63	// unloop was called, so exit
64	return 0;	64	return 0;
65	}	65	}
66		66
…		…
75	While this document tries to be as complete as possible in documenting	75	While this document tries to be as complete as possible in documenting
76	libev, its usage and the rationale behind its design, it is not a tutorial	76	libev, its usage and the rationale behind its design, it is not a tutorial
77	on event-based programming, nor will it introduce event-based programming	77	on event-based programming, nor will it introduce event-based programming
78	with libev.	78	with libev.
79		79
80	Familarity with event based programming techniques in general is assumed	80	Familiarity with event based programming techniques in general is assumed
81	throughout this document.	81	throughout this document.
82		82
83	=head1 ABOUT LIBEV	83	=head1 ABOUT LIBEV
84		84
85	Libev is an event loop: you register interest in certain events (such as a	85	Libev is an event loop: you register interest in certain events (such as a
…		…
118	Libev is very configurable. In this manual the default (and most common)	118	Libev is very configurable. In this manual the default (and most common)
119	configuration will be described, which supports multiple event loops. For	119	configuration will be described, which supports multiple event loops. For
120	more info about various configuration options please have a look at	120	more info about various configuration options please have a look at
121	B<EMBED> section in this manual. If libev was configured without support	121	B<EMBED> section in this manual. If libev was configured without support
122	for multiple event loops, then all functions taking an initial argument of	122	for multiple event loops, then all functions taking an initial argument of
123	name C<loop> (which is always of type C<ev_loop *>) will not have	123	name C<loop> (which is always of type C<struct ev_loop *>) will not have
124	this argument.	124	this argument.
125		125
126	=head2 TIME REPRESENTATION	126	=head2 TIME REPRESENTATION
127		127
128	Libev represents time as a single floating point number, representing	128	Libev represents time as a single floating point number, representing
129	the (fractional) number of seconds since the (POSIX) epoch (somewhere	129	the (fractional) number of seconds since the (POSIX) epoch (in practice
130	near the beginning of 1970, details are complicated, don't ask). This	130	somewhere near the beginning of 1970, details are complicated, don't
131	type is called C<ev_tstamp>, which is what you should use too. It usually	131	ask). This type is called C<ev_tstamp>, which is what you should use
132	aliases to the C<double> type in C. When you need to do any calculations	132	too. It usually aliases to the C<double> type in C. When you need to do
133	on it, you should treat it as some floating point value. Unlike the name	133	any calculations on it, you should treat it as some floating point value.
		134
134	component C<stamp> might indicate, it is also used for time differences	135	Unlike the name component C<stamp> might indicate, it is also used for
135	throughout libev.	136	time differences (e.g. delays) throughout libev.
136		137
137	=head1 ERROR HANDLING	138	=head1 ERROR HANDLING
138		139
139	Libev knows three classes of errors: operating system errors, usage errors	140	Libev knows three classes of errors: operating system errors, usage errors
140	and internal errors (bugs).	141	and internal errors (bugs).
…		…
164		165
165	=item ev_tstamp ev_time ()	166	=item ev_tstamp ev_time ()
166		167
167	Returns the current time as libev would use it. Please note that the	168	Returns the current time as libev would use it. Please note that the
168	C<ev_now> function is usually faster and also often returns the timestamp	169	C<ev_now> function is usually faster and also often returns the timestamp
169	you actually want to know.	170	you actually want to know. Also interesting is the combination of
		171	C<ev_update_now> and C<ev_now>.
170		172
171	=item ev_sleep (ev_tstamp interval)	173	=item ev_sleep (ev_tstamp interval)
172		174
173	Sleep for the given interval: The current thread will be blocked until	175	Sleep for the given interval: The current thread will be blocked until
174	either it is interrupted or the given time interval has passed. Basically	176	either it is interrupted or the given time interval has passed. Basically
…		…
191	as this indicates an incompatible change. Minor versions are usually	193	as this indicates an incompatible change. Minor versions are usually
192	compatible to older versions, so a larger minor version alone is usually	194	compatible to older versions, so a larger minor version alone is usually
193	not a problem.	195	not a problem.
194		196
195	Example: Make sure we haven't accidentally been linked against the wrong	197	Example: Make sure we haven't accidentally been linked against the wrong
196	version.	198	version (note, however, that this will not detect other ABI mismatches,
		199	such as LFS or reentrancy).
197		200
198	assert (("libev version mismatch",	201	assert (("libev version mismatch",
199	ev_version_major () == EV_VERSION_MAJOR	202	ev_version_major () == EV_VERSION_MAJOR
200	&& ev_version_minor () >= EV_VERSION_MINOR));	203	&& ev_version_minor () >= EV_VERSION_MINOR));
201		204
…		…
212	assert (("sorry, no epoll, no sex",	215	assert (("sorry, no epoll, no sex",
213	ev_supported_backends () & EVBACKEND_EPOLL));	216	ev_supported_backends () & EVBACKEND_EPOLL));
214		217
215	=item unsigned int ev_recommended_backends ()	218	=item unsigned int ev_recommended_backends ()
216		219
217	Return the set of all backends compiled into this binary of libev and also	220	Return the set of all backends compiled into this binary of libev and
218	recommended for this platform. This set is often smaller than the one	221	also recommended for this platform, meaning it will work for most file
		222	descriptor types. This set is often smaller than the one returned by
219	returned by C<ev_supported_backends>, as for example kqueue is broken on	223	C<ev_supported_backends>, as for example kqueue is broken on most BSDs
220	most BSDs and will not be auto-detected unless you explicitly request it	224	and will not be auto-detected unless you explicitly request it (assuming
221	(assuming you know what you are doing). This is the set of backends that	225	you know what you are doing). This is the set of backends that libev will
222	libev will probe for if you specify no backends explicitly.	226	probe for if you specify no backends explicitly.
223		227
224	=item unsigned int ev_embeddable_backends ()	228	=item unsigned int ev_embeddable_backends ()
225		229
226	Returns the set of backends that are embeddable in other event loops. This	230	Returns the set of backends that are embeddable in other event loops. This
227	is the theoretical, all-platform, value. To find which backends	231	value is platform-specific but can include backends not available on the
228	might be supported on the current system, you would need to look at	232	current system. To find which embeddable backends might be supported on
229	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for	233	the current system, you would need to look at C<ev_embeddable_backends ()
230	recommended ones.	234	& ev_supported_backends ()>, likewise for recommended ones.
231		235
232	See the description of C<ev_embed> watchers for more info.	236	See the description of C<ev_embed> watchers for more info.
233		237
234	=item ev_set_allocator (void *(*cb)(void *ptr, long size)) [NOT REENTRANT]	238	=item ev_set_allocator (void *(*cb)(void *ptr, long size)) [NOT REENTRANT]
235		239
…		…
289	...	293	...
290	ev_set_syserr_cb (fatal_error);	294	ev_set_syserr_cb (fatal_error);
291		295
292	=back	296	=back
293		297
294	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	298	=head1 FUNCTIONS CONTROLLING EVENT LOOPS
295		299
296	An event loop is described by a C<struct ev_loop *> (the C<struct>	300	An event loop is described by a C<struct ev_loop *> (the C<struct> is
297	is I<not> optional in this case, as there is also an C<ev_loop>	301	I<not> optional in this case unless libev 3 compatibility is disabled, as
298	I<function>).	302	libev 3 had an C<ev_loop> function colliding with the struct name).
299		303
300	The library knows two types of such loops, the I<default> loop, which	304	The library knows two types of such loops, the I<default> loop, which
301	supports signals and child events, and dynamically created loops which do	305	supports signals and child events, and dynamically created event loops
302	not.	306	which do not.
303		307
304	=over 4	308	=over 4
305		309
306	=item struct ev_loop *ev_default_loop (unsigned int flags)	310	=item struct ev_loop *ev_default_loop (unsigned int flags)
307		311
308	This will initialise the default event loop if it hasn't been initialised	312	This returns the "default" event loop object, which is what you should
309	yet and return it. If the default loop could not be initialised, returns	313	normally use when you just need "the event loop". Event loop objects and
310	false. If it already was initialised it simply returns it (and ignores the	314	the C<flags> parameter are described in more detail in the entry for
311	flags. If that is troubling you, check C<ev_backend ()> afterwards).	315	C<ev_loop_new>.
		316
		317	If the default loop is already initialised then this function simply
		318	returns it (and ignores the flags. If that is troubling you, check
		319	C<ev_backend ()> afterwards). Otherwise it will create it with the given
		320	flags, which should almost always be C<0>, unless the caller is also the
		321	one calling C<ev_run> or otherwise qualifies as "the main program".
312		322
313	If you don't know what event loop to use, use the one returned from this	323	If you don't know what event loop to use, use the one returned from this
314	function.	324	function (or via the C<EV_DEFAULT> macro).
315		325
316	Note that this function is I<not> thread-safe, so if you want to use it	326	Note that this function is I<not> thread-safe, so if you want to use it
317	from multiple threads, you have to lock (note also that this is unlikely,	327	from multiple threads, you have to employ some kind of mutex (note also
318	as loops cannot be shared easily between threads anyway).	328	that this case is unlikely, as loops cannot be shared easily between
		329	threads anyway).
319		330
320	The default loop is the only loop that can handle C<ev_signal> and	331	The default loop is the only loop that can handle C<ev_child> watchers,
321	C<ev_child> watchers, and to do this, it always registers a handler	332	and to do this, it always registers a handler for C<SIGCHLD>. If this is
322	for C<SIGCHLD>. If this is a problem for your application you can either	333	a problem for your application you can either create a dynamic loop with
323	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you	334	C<ev_loop_new> which doesn't do that, or you can simply overwrite the
324	can simply overwrite the C<SIGCHLD> signal handler I<after> calling	335	C<SIGCHLD> signal handler I<after> calling C<ev_default_init>.
325	C<ev_default_init>.	336
		337	Example: This is the most typical usage.
		338
		339	if (!ev_default_loop (0))
		340	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		341
		342	Example: Restrict libev to the select and poll backends, and do not allow
		343	environment settings to be taken into account:
		344
		345	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
		346
		347	=item struct ev_loop *ev_loop_new (unsigned int flags)
		348
		349	This will create and initialise a new event loop object. If the loop
		350	could not be initialised, returns false.
		351
		352	Note that this function I<is> thread-safe, and one common way to use
		353	libev with threads is indeed to create one loop per thread, and using the
		354	default loop in the "main" or "initial" thread.
326		355
327	The flags argument can be used to specify special behaviour or specific	356	The flags argument can be used to specify special behaviour or specific
328	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	357	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
329		358
330	The following flags are supported:	359	The following flags are supported:
…		…
345	useful to try out specific backends to test their performance, or to work	374	useful to try out specific backends to test their performance, or to work
346	around bugs.	375	around bugs.
347		376
348	=item C<EVFLAG_FORKCHECK>	377	=item C<EVFLAG_FORKCHECK>
349		378
350	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after	379	Instead of calling C<ev_loop_fork> manually after a fork, you can also
351	a fork, you can also make libev check for a fork in each iteration by	380	make libev check for a fork in each iteration by enabling this flag.
352	enabling this flag.
353		381
354	This works by calling C<getpid ()> on every iteration of the loop,	382	This works by calling C<getpid ()> on every iteration of the loop,
355	and thus this might slow down your event loop if you do a lot of loop	383	and thus this might slow down your event loop if you do a lot of loop
356	iterations and little real work, but is usually not noticeable (on my	384	iterations and little real work, but is usually not noticeable (on my
357	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence	385	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence
…		…
370	When this flag is specified, then libev will not attempt to use the	398	When this flag is specified, then libev will not attempt to use the
371	I<inotify> API for it's C<ev_stat> watchers. Apart from debugging and	399	I<inotify> API for it's C<ev_stat> watchers. Apart from debugging and
372	testing, this flag can be useful to conserve inotify file descriptors, as	400	testing, this flag can be useful to conserve inotify file descriptors, as
373	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.	401	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.
374		402
375	=item C<EVFLAG_NOSIGNALFD>	403	=item C<EVFLAG_SIGNALFD>
376		404
377	When this flag is specified, then libev will not attempt to use the	405	When this flag is specified, then libev will attempt to use the
378	I<signalfd> API for it's C<ev_signal> (and C<ev_child>) watchers. This is	406	I<signalfd> API for it's C<ev_signal> (and C<ev_child>) watchers. This API
379	probably only useful to work around any bugs in libev. Consequently, this	407	delivers signals synchronously, which makes it both faster and might make
380	flag might go away once the signalfd functionality is considered stable,	408	it possible to get the queued signal data. It can also simplify signal
381	so it's useful mostly in environment variables and not in program code.	409	handling with threads, as long as you properly block signals in your
		410	threads that are not interested in handling them.
		411
		412	Signalfd will not be used by default as this changes your signal mask, and
		413	there are a lot of shoddy libraries and programs (glib's threadpool for
		414	example) that can't properly initialise their signal masks.
382		415
383	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	416	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
384		417
385	This is your standard select(2) backend. Not I<completely> standard, as	418	This is your standard select(2) backend. Not I<completely> standard, as
386	libev tries to roll its own fd_set with no limits on the number of fds,	419	libev tries to roll its own fd_set with no limits on the number of fds,
…		…
410		443
411	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and	444	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and
412	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.	445	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.
413		446
414	=item C<EVBACKEND_EPOLL> (value 4, Linux)	447	=item C<EVBACKEND_EPOLL> (value 4, Linux)
		448
		449	Use the linux-specific epoll(7) interface (for both pre- and post-2.6.9
		450	kernels).
415		451
416	For few fds, this backend is a bit little slower than poll and select,	452	For few fds, this backend is a bit little slower than poll and select,
417	but it scales phenomenally better. While poll and select usually scale	453	but it scales phenomenally better. While poll and select usually scale
418	like O(total_fds) where n is the total number of fds (or the highest fd),	454	like O(total_fds) where n is the total number of fds (or the highest fd),
419	epoll scales either O(1) or O(active_fds).	455	epoll scales either O(1) or O(active_fds).
…		…
431	of course I<doesn't>, and epoll just loves to report events for totally	467	of course I<doesn't>, and epoll just loves to report events for totally
432	I<different> file descriptors (even already closed ones, so one cannot	468	I<different> file descriptors (even already closed ones, so one cannot
433	even remove them from the set) than registered in the set (especially	469	even remove them from the set) than registered in the set (especially
434	on SMP systems). Libev tries to counter these spurious notifications by	470	on SMP systems). Libev tries to counter these spurious notifications by
435	employing an additional generation counter and comparing that against the	471	employing an additional generation counter and comparing that against the
436	events to filter out spurious ones, recreating the set when required.	472	events to filter out spurious ones, recreating the set when required. Last
		473	not least, it also refuses to work with some file descriptors which work
		474	perfectly fine with C<select> (files, many character devices...).
437		475
438	While stopping, setting and starting an I/O watcher in the same iteration	476	While stopping, setting and starting an I/O watcher in the same iteration
439	will result in some caching, there is still a system call per such	477	will result in some caching, there is still a system call per such
440	incident (because the same I<file descriptor> could point to a different	478	incident (because the same I<file descriptor> could point to a different
441	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed	479	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed
…		…
539	If one or more of the backend flags are or'ed into the flags value,	577	If one or more of the backend flags are or'ed into the flags value,
540	then only these backends will be tried (in the reverse order as listed	578	then only these backends will be tried (in the reverse order as listed
541	here). If none are specified, all backends in C<ev_recommended_backends	579	here). If none are specified, all backends in C<ev_recommended_backends
542	()> will be tried.	580	()> will be tried.
543		581
544	Example: This is the most typical usage.
545
546	if (!ev_default_loop (0))
547	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
548
549	Example: Restrict libev to the select and poll backends, and do not allow
550	environment settings to be taken into account:
551
552	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
553
554	Example: Use whatever libev has to offer, but make sure that kqueue is
555	used if available (warning, breaks stuff, best use only with your own
556	private event loop and only if you know the OS supports your types of
557	fds):
558
559	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
560
561	=item struct ev_loop *ev_loop_new (unsigned int flags)
562
563	Similar to C<ev_default_loop>, but always creates a new event loop that is
564	always distinct from the default loop. Unlike the default loop, it cannot
565	handle signal and child watchers, and attempts to do so will be greeted by
566	undefined behaviour (or a failed assertion if assertions are enabled).
567
568	Note that this function I<is> thread-safe, and the recommended way to use
569	libev with threads is indeed to create one loop per thread, and using the
570	default loop in the "main" or "initial" thread.
571
572	Example: Try to create a event loop that uses epoll and nothing else.	582	Example: Try to create a event loop that uses epoll and nothing else.
573		583
574	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	584	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
575	if (!epoller)	585	if (!epoller)
576	fatal ("no epoll found here, maybe it hides under your chair");	586	fatal ("no epoll found here, maybe it hides under your chair");
577		587
		588	Example: Use whatever libev has to offer, but make sure that kqueue is
		589	used if available.
		590
		591	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_KQUEUE);
		592
578	=item ev_default_destroy ()	593	=item ev_loop_destroy (loop)
579		594
580	Destroys the default loop again (frees all memory and kernel state	595	Destroys an event loop object (frees all memory and kernel state
581	etc.). None of the active event watchers will be stopped in the normal	596	etc.). None of the active event watchers will be stopped in the normal
582	sense, so e.g. C<ev_is_active> might still return true. It is your	597	sense, so e.g. C<ev_is_active> might still return true. It is your
583	responsibility to either stop all watchers cleanly yourself I<before>	598	responsibility to either stop all watchers cleanly yourself I<before>
584	calling this function, or cope with the fact afterwards (which is usually	599	calling this function, or cope with the fact afterwards (which is usually
585	the easiest thing, you can just ignore the watchers and/or C<free ()> them	600	the easiest thing, you can just ignore the watchers and/or C<free ()> them
…		…
587		602
588	Note that certain global state, such as signal state (and installed signal	603	Note that certain global state, such as signal state (and installed signal
589	handlers), will not be freed by this function, and related watchers (such	604	handlers), will not be freed by this function, and related watchers (such
590	as signal and child watchers) would need to be stopped manually.	605	as signal and child watchers) would need to be stopped manually.
591		606
592	In general it is not advisable to call this function except in the	607	This function is normally used on loop objects allocated by
593	rare occasion where you really need to free e.g. the signal handling	608	C<ev_loop_new>, but it can also be used on the default loop returned by
		609	C<ev_default_loop>, in which case it is not thread-safe.
		610
		611	Note that it is not advisable to call this function on the default loop
		612	except in the rare occasion where you really need to free it's resources.
594	pipe fds. If you need dynamically allocated loops it is better to use	613	If you need dynamically allocated loops it is better to use C<ev_loop_new>
595	C<ev_loop_new> and C<ev_loop_destroy>).	614	and C<ev_loop_destroy>.
596		615
597	=item ev_loop_destroy (loop)	616	=item ev_loop_fork (loop)
598		617
599	Like C<ev_default_destroy>, but destroys an event loop created by an
600	earlier call to C<ev_loop_new>.
601
602	=item ev_default_fork ()
603
604	This function sets a flag that causes subsequent C<ev_loop> iterations	618	This function sets a flag that causes subsequent C<ev_run> iterations to
605	to reinitialise the kernel state for backends that have one. Despite the	619	reinitialise the kernel state for backends that have one. Despite the
606	name, you can call it anytime, but it makes most sense after forking, in	620	name, you can call it anytime, but it makes most sense after forking, in
607	the child process (or both child and parent, but that again makes little	621	the child process. You I<must> call it (or use C<EVFLAG_FORKCHECK>) in the
608	sense). You I<must> call it in the child before using any of the libev	622	child before resuming or calling C<ev_run>.
609	functions, and it will only take effect at the next C<ev_loop> iteration.	623
		624	Again, you I<have> to call it on I<any> loop that you want to re-use after
		625	a fork, I<even if you do not plan to use the loop in the parent>. This is
		626	because some kernel interfaces *cough* I<kqueue> *cough* do funny things
		627	during fork.
610		628
611	On the other hand, you only need to call this function in the child	629	On the other hand, you only need to call this function in the child
612	process if and only if you want to use the event library in the child. If	630	process if and only if you want to use the event loop in the child. If
613	you just fork+exec, you don't have to call it at all.	631	you just fork+exec or create a new loop in the child, you don't have to
		632	call it at all (in fact, C<epoll> is so badly broken that it makes a
		633	difference, but libev will usually detect this case on its own and do a
		634	costly reset of the backend).
614		635
615	The function itself is quite fast and it's usually not a problem to call	636	The function itself is quite fast and it's usually not a problem to call
616	it just in case after a fork. To make this easy, the function will fit in	637	it just in case after a fork.
617	quite nicely into a call to C<pthread_atfork>:
618		638
		639	Example: Automate calling C<ev_loop_fork> on the default loop when
		640	using pthreads.
		641
		642	static void
		643	post_fork_child (void)
		644	{
		645	ev_loop_fork (EV_DEFAULT);
		646	}
		647
		648	...
619	pthread_atfork (0, 0, ev_default_fork);	649	pthread_atfork (0, 0, post_fork_child);
620
621	=item ev_loop_fork (loop)
622
623	Like C<ev_default_fork>, but acts on an event loop created by
624	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
625	after fork that you want to re-use in the child, and how you do this is
626	entirely your own problem.
627		650
628	=item int ev_is_default_loop (loop)	651	=item int ev_is_default_loop (loop)
629		652
630	Returns true when the given loop is, in fact, the default loop, and false	653	Returns true when the given loop is, in fact, the default loop, and false
631	otherwise.	654	otherwise.
632		655
633	=item unsigned int ev_loop_count (loop)	656	=item unsigned int ev_iteration (loop)
634		657
635	Returns the count of loop iterations for the loop, which is identical to	658	Returns the current iteration count for the event loop, which is identical
636	the number of times libev did poll for new events. It starts at C<0> and	659	to the number of times libev did poll for new events. It starts at C<0>
637	happily wraps around with enough iterations.	660	and happily wraps around with enough iterations.
638		661
639	This value can sometimes be useful as a generation counter of sorts (it	662	This value can sometimes be useful as a generation counter of sorts (it
640	"ticks" the number of loop iterations), as it roughly corresponds with	663	"ticks" the number of loop iterations), as it roughly corresponds with
641	C<ev_prepare> and C<ev_check> calls.	664	C<ev_prepare> and C<ev_check> calls - and is incremented between the
		665	prepare and check phases.
642		666
643	=item unsigned int ev_loop_depth (loop)	667	=item unsigned int ev_depth (loop)
644		668
645	Returns the number of times C<ev_loop> was entered minus the number of	669	Returns the number of times C<ev_run> was entered minus the number of
646	times C<ev_loop> was exited, in other words, the recursion depth.	670	times C<ev_run> was exited, in other words, the recursion depth.
647		671
648	Outside C<ev_loop>, this number is zero. In a callback, this number is	672	Outside C<ev_run>, this number is zero. In a callback, this number is
649	C<1>, unless C<ev_loop> was invoked recursively (or from another thread),	673	C<1>, unless C<ev_run> was invoked recursively (or from another thread),
650	in which case it is higher.	674	in which case it is higher.
651		675
652	Leaving C<ev_loop> abnormally (setjmp/longjmp, cancelling the thread	676	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread
653	etc.), doesn't count as exit.	677	etc.), doesn't count as "exit" - consider this as a hint to avoid such
		678	ungentleman-like behaviour unless it's really convenient.
654		679
655	=item unsigned int ev_backend (loop)	680	=item unsigned int ev_backend (loop)
656		681
657	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	682	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
658	use.	683	use.
…		…
667		692
668	=item ev_now_update (loop)	693	=item ev_now_update (loop)
669		694
670	Establishes the current time by querying the kernel, updating the time	695	Establishes the current time by querying the kernel, updating the time
671	returned by C<ev_now ()> in the progress. This is a costly operation and	696	returned by C<ev_now ()> in the progress. This is a costly operation and
672	is usually done automatically within C<ev_loop ()>.	697	is usually done automatically within C<ev_run ()>.
673		698
674	This function is rarely useful, but when some event callback runs for a	699	This function is rarely useful, but when some event callback runs for a
675	very long time without entering the event loop, updating libev's idea of	700	very long time without entering the event loop, updating libev's idea of
676	the current time is a good idea.	701	the current time is a good idea.
677		702
…		…
679		704
680	=item ev_suspend (loop)	705	=item ev_suspend (loop)
681		706
682	=item ev_resume (loop)	707	=item ev_resume (loop)
683		708
684	These two functions suspend and resume a loop, for use when the loop is	709	These two functions suspend and resume an event loop, for use when the
685	not used for a while and timeouts should not be processed.	710	loop is not used for a while and timeouts should not be processed.
686		711
687	A typical use case would be an interactive program such as a game: When	712	A typical use case would be an interactive program such as a game: When
688	the user presses C<^Z> to suspend the game and resumes it an hour later it	713	the user presses C<^Z> to suspend the game and resumes it an hour later it
689	would be best to handle timeouts as if no time had actually passed while	714	would be best to handle timeouts as if no time had actually passed while
690	the program was suspended. This can be achieved by calling C<ev_suspend>	715	the program was suspended. This can be achieved by calling C<ev_suspend>
…		…
692	C<ev_resume> directly afterwards to resume timer processing.	717	C<ev_resume> directly afterwards to resume timer processing.
693		718
694	Effectively, all C<ev_timer> watchers will be delayed by the time spend	719	Effectively, all C<ev_timer> watchers will be delayed by the time spend
695	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers	720	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers
696	will be rescheduled (that is, they will lose any events that would have	721	will be rescheduled (that is, they will lose any events that would have
697	occured while suspended).	722	occurred while suspended).
698		723
699	After calling C<ev_suspend> you B<must not> call I<any> function on the	724	After calling C<ev_suspend> you B<must not> call I<any> function on the
700	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>	725	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>
701	without a previous call to C<ev_suspend>.	726	without a previous call to C<ev_suspend>.
702		727
703	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the	728	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the
704	event loop time (see C<ev_now_update>).	729	event loop time (see C<ev_now_update>).
705		730
706	=item ev_loop (loop, int flags)	731	=item ev_run (loop, int flags)
707		732
708	Finally, this is it, the event handler. This function usually is called	733	Finally, this is it, the event handler. This function usually is called
709	after you initialised all your watchers and you want to start handling	734	after you have initialised all your watchers and you want to start
710	events.	735	handling events. It will ask the operating system for any new events, call
		736	the watcher callbacks, an then repeat the whole process indefinitely: This
		737	is why event loops are called I<loops>.
711		738
712	If the flags argument is specified as C<0>, it will not return until	739	If the flags argument is specified as C<0>, it will keep handling events
713	either no event watchers are active anymore or C<ev_unloop> was called.	740	until either no event watchers are active anymore or C<ev_break> was
		741	called.
714		742
715	Please note that an explicit C<ev_unloop> is usually better than	743	Please note that an explicit C<ev_break> is usually better than
716	relying on all watchers to be stopped when deciding when a program has	744	relying on all watchers to be stopped when deciding when a program has
717	finished (especially in interactive programs), but having a program	745	finished (especially in interactive programs), but having a program
718	that automatically loops as long as it has to and no longer by virtue	746	that automatically loops as long as it has to and no longer by virtue
719	of relying on its watchers stopping correctly, that is truly a thing of	747	of relying on its watchers stopping correctly, that is truly a thing of
720	beauty.	748	beauty.
721		749
722	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle	750	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle
723	those events and any already outstanding ones, but will not block your	751	those events and any already outstanding ones, but will not wait and
724	process in case there are no events and will return after one iteration of	752	block your process in case there are no events and will return after one
725	the loop.	753	iteration of the loop. This is sometimes useful to poll and handle new
		754	events while doing lengthy calculations, to keep the program responsive.
726		755
727	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if	756	A flags value of C<EVRUN_ONCE> will look for new events (waiting if
728	necessary) and will handle those and any already outstanding ones. It	757	necessary) and will handle those and any already outstanding ones. It
729	will block your process until at least one new event arrives (which could	758	will block your process until at least one new event arrives (which could
730	be an event internal to libev itself, so there is no guarantee that a	759	be an event internal to libev itself, so there is no guarantee that a
731	user-registered callback will be called), and will return after one	760	user-registered callback will be called), and will return after one
732	iteration of the loop.	761	iteration of the loop.
733		762
734	This is useful if you are waiting for some external event in conjunction	763	This is useful if you are waiting for some external event in conjunction
735	with something not expressible using other libev watchers (i.e. "roll your	764	with something not expressible using other libev watchers (i.e. "roll your
736	own C<ev_loop>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is	765	own C<ev_run>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is
737	usually a better approach for this kind of thing.	766	usually a better approach for this kind of thing.
738		767
739	Here are the gory details of what C<ev_loop> does:	768	Here are the gory details of what C<ev_run> does:
740		769
		770	- Increment loop depth.
		771	- Reset the ev_break status.
741	- Before the first iteration, call any pending watchers.	772	- Before the first iteration, call any pending watchers.
		773	LOOP:
742	* If EVFLAG_FORKCHECK was used, check for a fork.	774	- If EVFLAG_FORKCHECK was used, check for a fork.
743	- If a fork was detected (by any means), queue and call all fork watchers.	775	- If a fork was detected (by any means), queue and call all fork watchers.
744	- Queue and call all prepare watchers.	776	- Queue and call all prepare watchers.
		777	- If ev_break was called, goto FINISH.
745	- If we have been forked, detach and recreate the kernel state	778	- If we have been forked, detach and recreate the kernel state
746	as to not disturb the other process.	779	as to not disturb the other process.
747	- Update the kernel state with all outstanding changes.	780	- Update the kernel state with all outstanding changes.
748	- Update the "event loop time" (ev_now ()).	781	- Update the "event loop time" (ev_now ()).
749	- Calculate for how long to sleep or block, if at all	782	- Calculate for how long to sleep or block, if at all
750	(active idle watchers, EVLOOP_NONBLOCK or not having	783	(active idle watchers, EVRUN_NOWAIT or not having
751	any active watchers at all will result in not sleeping).	784	any active watchers at all will result in not sleeping).
752	- Sleep if the I/O and timer collect interval say so.	785	- Sleep if the I/O and timer collect interval say so.
		786	- Increment loop iteration counter.
753	- Block the process, waiting for any events.	787	- Block the process, waiting for any events.
754	- Queue all outstanding I/O (fd) events.	788	- Queue all outstanding I/O (fd) events.
755	- Update the "event loop time" (ev_now ()), and do time jump adjustments.	789	- Update the "event loop time" (ev_now ()), and do time jump adjustments.
756	- Queue all expired timers.	790	- Queue all expired timers.
757	- Queue all expired periodics.	791	- Queue all expired periodics.
758	- Unless any events are pending now, queue all idle watchers.	792	- Queue all idle watchers with priority higher than that of pending events.
759	- Queue all check watchers.	793	- Queue all check watchers.
760	- Call all queued watchers in reverse order (i.e. check watchers first).	794	- Call all queued watchers in reverse order (i.e. check watchers first).
761	Signals and child watchers are implemented as I/O watchers, and will	795	Signals and child watchers are implemented as I/O watchers, and will
762	be handled here by queueing them when their watcher gets executed.	796	be handled here by queueing them when their watcher gets executed.
763	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	797	- If ev_break has been called, or EVRUN_ONCE or EVRUN_NOWAIT
764	were used, or there are no active watchers, return, otherwise	798	were used, or there are no active watchers, goto FINISH, otherwise
765	continue with step *.	799	continue with step LOOP.
		800	FINISH:
		801	- Reset the ev_break status iff it was EVBREAK_ONE.
		802	- Decrement the loop depth.
		803	- Return.
766		804
767	Example: Queue some jobs and then loop until no events are outstanding	805	Example: Queue some jobs and then loop until no events are outstanding
768	anymore.	806	anymore.
769		807
770	... queue jobs here, make sure they register event watchers as long	808	... queue jobs here, make sure they register event watchers as long
771	... as they still have work to do (even an idle watcher will do..)	809	... as they still have work to do (even an idle watcher will do..)
772	ev_loop (my_loop, 0);	810	ev_run (my_loop, 0);
773	... jobs done or somebody called unloop. yeah!	811	... jobs done or somebody called unloop. yeah!
774		812
775	=item ev_unloop (loop, how)	813	=item ev_break (loop, how)
776		814
777	Can be used to make a call to C<ev_loop> return early (but only after it	815	Can be used to make a call to C<ev_run> return early (but only after it
778	has processed all outstanding events). The C<how> argument must be either	816	has processed all outstanding events). The C<how> argument must be either
779	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	817	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or
780	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	818	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.
781		819
782	This "unloop state" will be cleared when entering C<ev_loop> again.	820	This "unloop state" will be cleared when entering C<ev_run> again.
783		821
784	It is safe to call C<ev_unloop> from otuside any C<ev_loop> calls.	822	It is safe to call C<ev_break> from outside any C<ev_run> calls. ##TODO##
785		823
786	=item ev_ref (loop)	824	=item ev_ref (loop)
787		825
788	=item ev_unref (loop)	826	=item ev_unref (loop)
789		827
790	Ref/unref can be used to add or remove a reference count on the event	828	Ref/unref can be used to add or remove a reference count on the event
791	loop: Every watcher keeps one reference, and as long as the reference	829	loop: Every watcher keeps one reference, and as long as the reference
792	count is nonzero, C<ev_loop> will not return on its own.	830	count is nonzero, C<ev_run> will not return on its own.
793		831
794	If you have a watcher you never unregister that should not keep C<ev_loop>	832	This is useful when you have a watcher that you never intend to
795	from returning, call ev_unref() after starting, and ev_ref() before	833	unregister, but that nevertheless should not keep C<ev_run> from
		834	returning. In such a case, call C<ev_unref> after starting, and C<ev_ref>
796	stopping it.	835	before stopping it.
797		836
798	As an example, libev itself uses this for its internal signal pipe: It	837	As an example, libev itself uses this for its internal signal pipe: It
799	is not visible to the libev user and should not keep C<ev_loop> from	838	is not visible to the libev user and should not keep C<ev_run> from
800	exiting if no event watchers registered by it are active. It is also an	839	exiting if no event watchers registered by it are active. It is also an
801	excellent way to do this for generic recurring timers or from within	840	excellent way to do this for generic recurring timers or from within
802	third-party libraries. Just remember to I<unref after start> and I<ref	841	third-party libraries. Just remember to I<unref after start> and I<ref
803	before stop> (but only if the watcher wasn't active before, or was active	842	before stop> (but only if the watcher wasn't active before, or was active
804	before, respectively. Note also that libev might stop watchers itself	843	before, respectively. Note also that libev might stop watchers itself
805	(e.g. non-repeating timers) in which case you have to C<ev_ref>	844	(e.g. non-repeating timers) in which case you have to C<ev_ref>
806	in the callback).	845	in the callback).
807		846
808	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	847	Example: Create a signal watcher, but keep it from keeping C<ev_run>
809	running when nothing else is active.	848	running when nothing else is active.
810		849
811	ev_signal exitsig;	850	ev_signal exitsig;
812	ev_signal_init (&exitsig, sig_cb, SIGINT);	851	ev_signal_init (&exitsig, sig_cb, SIGINT);
813	ev_signal_start (loop, &exitsig);	852	ev_signal_start (loop, &exitsig);
…		…
858	usually doesn't make much sense to set it to a lower value than C<0.01>,	897	usually doesn't make much sense to set it to a lower value than C<0.01>,
859	as this approaches the timing granularity of most systems. Note that if	898	as this approaches the timing granularity of most systems. Note that if
860	you do transactions with the outside world and you can't increase the	899	you do transactions with the outside world and you can't increase the
861	parallelity, then this setting will limit your transaction rate (if you	900	parallelity, then this setting will limit your transaction rate (if you
862	need to poll once per transaction and the I/O collect interval is 0.01,	901	need to poll once per transaction and the I/O collect interval is 0.01,
863	then you can't do more than 100 transations per second).	902	then you can't do more than 100 transactions per second).
864		903
865	Setting the I<timeout collect interval> can improve the opportunity for	904	Setting the I<timeout collect interval> can improve the opportunity for
866	saving power, as the program will "bundle" timer callback invocations that	905	saving power, as the program will "bundle" timer callback invocations that
867	are "near" in time together, by delaying some, thus reducing the number of	906	are "near" in time together, by delaying some, thus reducing the number of
868	times the process sleeps and wakes up again. Another useful technique to	907	times the process sleeps and wakes up again. Another useful technique to
…		…
876	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);	915	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);
877		916
878	=item ev_invoke_pending (loop)	917	=item ev_invoke_pending (loop)
879		918
880	This call will simply invoke all pending watchers while resetting their	919	This call will simply invoke all pending watchers while resetting their
881	pending state. Normally, C<ev_loop> does this automatically when required,	920	pending state. Normally, C<ev_run> does this automatically when required,
882	but when overriding the invoke callback this call comes handy.	921	but when overriding the invoke callback this call comes handy. This
		922	function can be invoked from a watcher - this can be useful for example
		923	when you want to do some lengthy calculation and want to pass further
		924	event handling to another thread (you still have to make sure only one
		925	thread executes within C<ev_invoke_pending> or C<ev_run> of course).
883		926
884	=item int ev_pending_count (loop)	927	=item int ev_pending_count (loop)
885		928
886	Returns the number of pending watchers - zero indicates that no watchers	929	Returns the number of pending watchers - zero indicates that no watchers
887	are pending.	930	are pending.
888		931
889	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))	932	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))
890		933
891	This overrides the invoke pending functionality of the loop: Instead of	934	This overrides the invoke pending functionality of the loop: Instead of
892	invoking all pending watchers when there are any, C<ev_loop> will call	935	invoking all pending watchers when there are any, C<ev_run> will call
893	this callback instead. This is useful, for example, when you want to	936	this callback instead. This is useful, for example, when you want to
894	invoke the actual watchers inside another context (another thread etc.).	937	invoke the actual watchers inside another context (another thread etc.).
895		938
896	If you want to reset the callback, use C<ev_invoke_pending> as new	939	If you want to reset the callback, use C<ev_invoke_pending> as new
897	callback.	940	callback.
…		…
900		943
901	Sometimes you want to share the same loop between multiple threads. This	944	Sometimes you want to share the same loop between multiple threads. This
902	can be done relatively simply by putting mutex_lock/unlock calls around	945	can be done relatively simply by putting mutex_lock/unlock calls around
903	each call to a libev function.	946	each call to a libev function.
904		947
905	However, C<ev_loop> can run an indefinite time, so it is not feasible to	948	However, C<ev_run> can run an indefinite time, so it is not feasible
906	wait for it to return. One way around this is to wake up the loop via	949	to wait for it to return. One way around this is to wake up the event
907	C<ev_unloop> and C<av_async_send>, another way is to set these I<release>	950	loop via C<ev_break> and C<av_async_send>, another way is to set these
908	and I<acquire> callbacks on the loop.	951	I<release> and I<acquire> callbacks on the loop.
909		952
910	When set, then C<release> will be called just before the thread is	953	When set, then C<release> will be called just before the thread is
911	suspended waiting for new events, and C<acquire> is called just	954	suspended waiting for new events, and C<acquire> is called just
912	afterwards.	955	afterwards.
913		956
…		…
916		959
917	While event loop modifications are allowed between invocations of	960	While event loop modifications are allowed between invocations of
918	C<release> and C<acquire> (that's their only purpose after all), no	961	C<release> and C<acquire> (that's their only purpose after all), no
919	modifications done will affect the event loop, i.e. adding watchers will	962	modifications done will affect the event loop, i.e. adding watchers will
920	have no effect on the set of file descriptors being watched, or the time	963	have no effect on the set of file descriptors being watched, or the time
921	waited. USe an C<ev_async> watcher to wake up C<ev_loop> when you want it	964	waited. Use an C<ev_async> watcher to wake up C<ev_run> when you want it
922	to take note of any changes you made.	965	to take note of any changes you made.
923		966
924	In theory, threads executing C<ev_loop> will be async-cancel safe between	967	In theory, threads executing C<ev_run> will be async-cancel safe between
925	invocations of C<release> and C<acquire>.	968	invocations of C<release> and C<acquire>.
926		969
927	See also the locking example in the C<THREADS> section later in this	970	See also the locking example in the C<THREADS> section later in this
928	document.	971	document.
929		972
…		…
938	These two functions can be used to associate arbitrary data with a loop,	981	These two functions can be used to associate arbitrary data with a loop,
939	and are intended solely for the C<invoke_pending_cb>, C<release> and	982	and are intended solely for the C<invoke_pending_cb>, C<release> and
940	C<acquire> callbacks described above, but of course can be (ab-)used for	983	C<acquire> callbacks described above, but of course can be (ab-)used for
941	any other purpose as well.	984	any other purpose as well.
942		985
943	=item ev_loop_verify (loop)	986	=item ev_verify (loop)
944		987
945	This function only does something when C<EV_VERIFY> support has been	988	This function only does something when C<EV_VERIFY> support has been
946	compiled in, which is the default for non-minimal builds. It tries to go	989	compiled in, which is the default for non-minimal builds. It tries to go
947	through all internal structures and checks them for validity. If anything	990	through all internal structures and checks them for validity. If anything
948	is found to be inconsistent, it will print an error message to standard	991	is found to be inconsistent, it will print an error message to standard
…		…
959		1002
960	In the following description, uppercase C<TYPE> in names stands for the	1003	In the following description, uppercase C<TYPE> in names stands for the
961	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer	1004	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer
962	watchers and C<ev_io_start> for I/O watchers.	1005	watchers and C<ev_io_start> for I/O watchers.
963		1006
964	A watcher is a structure that you create and register to record your	1007	A watcher is an opaque structure that you allocate and register to record
965	interest in some event. For instance, if you want to wait for STDIN to	1008	your interest in some event. To make a concrete example, imagine you want
966	become readable, you would create an C<ev_io> watcher for that:	1009	to wait for STDIN to become readable, you would create an C<ev_io> watcher
		1010	for that:
967		1011
968	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)	1012	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)
969	{	1013	{
970	ev_io_stop (w);	1014	ev_io_stop (w);
971	ev_unloop (loop, EVUNLOOP_ALL);	1015	ev_break (loop, EVBREAK_ALL);
972	}	1016	}
973		1017
974	struct ev_loop *loop = ev_default_loop (0);	1018	struct ev_loop *loop = ev_default_loop (0);
975		1019
976	ev_io stdin_watcher;	1020	ev_io stdin_watcher;
977		1021
978	ev_init (&stdin_watcher, my_cb);	1022	ev_init (&stdin_watcher, my_cb);
979	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);	1023	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
980	ev_io_start (loop, &stdin_watcher);	1024	ev_io_start (loop, &stdin_watcher);
981		1025
982	ev_loop (loop, 0);	1026	ev_run (loop, 0);
983		1027
984	As you can see, you are responsible for allocating the memory for your	1028	As you can see, you are responsible for allocating the memory for your
985	watcher structures (and it is I<usually> a bad idea to do this on the	1029	watcher structures (and it is I<usually> a bad idea to do this on the
986	stack).	1030	stack).
987		1031
988	Each watcher has an associated watcher structure (called C<struct ev_TYPE>	1032	Each watcher has an associated watcher structure (called C<struct ev_TYPE>
989	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).	1033	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).
990		1034
991	Each watcher structure must be initialised by a call to C<ev_init	1035	Each watcher structure must be initialised by a call to C<ev_init (watcher
992	(watcher *, callback)>, which expects a callback to be provided. This	1036	*, callback)>, which expects a callback to be provided. This callback is
993	callback gets invoked each time the event occurs (or, in the case of I/O	1037	invoked each time the event occurs (or, in the case of I/O watchers, each
994	watchers, each time the event loop detects that the file descriptor given	1038	time the event loop detects that the file descriptor given is readable
995	is readable and/or writable).	1039	and/or writable).
996		1040
997	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>	1041	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>
998	macro to configure it, with arguments specific to the watcher type. There	1042	macro to configure it, with arguments specific to the watcher type. There
999	is also a macro to combine initialisation and setting in one call: C<<	1043	is also a macro to combine initialisation and setting in one call: C<<
1000	ev_TYPE_init (watcher *, callback, ...) >>.	1044	ev_TYPE_init (watcher *, callback, ...) >>.
…		…
1023	=item C<EV_WRITE>	1067	=item C<EV_WRITE>
1024		1068
1025	The file descriptor in the C<ev_io> watcher has become readable and/or	1069	The file descriptor in the C<ev_io> watcher has become readable and/or
1026	writable.	1070	writable.
1027		1071
1028	=item C<EV_TIMEOUT>	1072	=item C<EV_TIMER>
1029		1073
1030	The C<ev_timer> watcher has timed out.	1074	The C<ev_timer> watcher has timed out.
1031		1075
1032	=item C<EV_PERIODIC>	1076	=item C<EV_PERIODIC>
1033		1077
…		…
1051		1095
1052	=item C<EV_PREPARE>	1096	=item C<EV_PREPARE>
1053		1097
1054	=item C<EV_CHECK>	1098	=item C<EV_CHECK>
1055		1099
1056	All C<ev_prepare> watchers are invoked just I<before> C<ev_loop> starts	1100	All C<ev_prepare> watchers are invoked just I<before> C<ev_run> starts
1057	to gather new events, and all C<ev_check> watchers are invoked just after	1101	to gather new events, and all C<ev_check> watchers are invoked just after
1058	C<ev_loop> has gathered them, but before it invokes any callbacks for any	1102	C<ev_run> has gathered them, but before it invokes any callbacks for any
1059	received events. Callbacks of both watcher types can start and stop as	1103	received events. Callbacks of both watcher types can start and stop as
1060	many watchers as they want, and all of them will be taken into account	1104	many watchers as they want, and all of them will be taken into account
1061	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	1105	(for example, a C<ev_prepare> watcher might start an idle watcher to keep
1062	C<ev_loop> from blocking).	1106	C<ev_run> from blocking).
1063		1107
1064	=item C<EV_EMBED>	1108	=item C<EV_EMBED>
1065		1109
1066	The embedded event loop specified in the C<ev_embed> watcher needs attention.	1110	The embedded event loop specified in the C<ev_embed> watcher needs attention.
1067		1111
1068	=item C<EV_FORK>	1112	=item C<EV_FORK>
1069		1113
1070	The event loop has been resumed in the child process after fork (see	1114	The event loop has been resumed in the child process after fork (see
1071	C<ev_fork>).	1115	C<ev_fork>).
		1116
		1117	=item C<EV_CLEANUP>
		1118
		1119	The event loop is abotu to be destroyed (see C<ev_cleanup>).
1072		1120
1073	=item C<EV_ASYNC>	1121	=item C<EV_ASYNC>
1074		1122
1075	The given async watcher has been asynchronously notified (see C<ev_async>).	1123	The given async watcher has been asynchronously notified (see C<ev_async>).
1076		1124
…		…
1098	programs, though, as the fd could already be closed and reused for another	1146	programs, though, as the fd could already be closed and reused for another
1099	thing, so beware.	1147	thing, so beware.
1100		1148
1101	=back	1149	=back
1102		1150
		1151	=head2 WATCHER STATES
		1152
		1153	There are various watcher states mentioned throughout this manual -
		1154	active, pending and so on. In this section these states and the rules to
		1155	transition between them will be described in more detail - and while these
		1156	rules might look complicated, they usually do "the right thing".
		1157
		1158	=over 4
		1159
		1160	=item initialiased
		1161
		1162	Before a watcher can be registered with the event looop it has to be
		1163	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
		1164	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
		1165
		1166	In this state it is simply some block of memory that is suitable for use
		1167	in an event loop. It can be moved around, freed, reused etc. at will.
		1168
		1169	=item started/running/active
		1170
		1171	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
		1172	property of the event loop, and is actively waiting for events. While in
		1173	this state it cannot be accessed (except in a few documented ways), moved,
		1174	freed or anything else - the only legal thing is to keep a pointer to it,
		1175	and call libev functions on it that are documented to work on active watchers.
		1176
		1177	=item pending
		1178
		1179	If a watcher is active and libev determines that an event it is interested
		1180	in has occurred (such as a timer expiring), it will become pending. It will
		1181	stay in this pending state until either it is stopped or its callback is
		1182	about to be invoked, so it is not normally pending inside the watcher
		1183	callback.
		1184
		1185	The watcher might or might not be active while it is pending (for example,
		1186	an expired non-repeating timer can be pending but no longer active). If it
		1187	is stopped, it can be freely accessed (e.g. by calling C<ev_TYPE_set>),
		1188	but it is still property of the event loop at this time, so cannot be
		1189	moved, freed or reused. And if it is active the rules described in the
		1190	previous item still apply.
		1191
		1192	It is also possible to feed an event on a watcher that is not active (e.g.
		1193	via C<ev_feed_event>), in which case it becomes pending without being
		1194	active.
		1195
		1196	=item stopped
		1197
		1198	A watcher can be stopped implicitly by libev (in which case it might still
		1199	be pending), or explicitly by calling its C<ev_TYPE_stop> function. The
		1200	latter will clear any pending state the watcher might be in, regardless
		1201	of whether it was active or not, so stopping a watcher explicitly before
		1202	freeing it is often a good idea.
		1203
		1204	While stopped (and not pending) the watcher is essentially in the
		1205	initialised state, that is it can be reused, moved, modified in any way
		1206	you wish.
		1207
		1208	=back
		1209
1103	=head2 GENERIC WATCHER FUNCTIONS	1210	=head2 GENERIC WATCHER FUNCTIONS
1104		1211
1105	=over 4	1212	=over 4
1106		1213
1107	=item C<ev_init> (ev_TYPE *watcher, callback)	1214	=item C<ev_init> (ev_TYPE *watcher, callback)
…		…
1123		1230
1124	ev_io w;	1231	ev_io w;
1125	ev_init (&w, my_cb);	1232	ev_init (&w, my_cb);
1126	ev_io_set (&w, STDIN_FILENO, EV_READ);	1233	ev_io_set (&w, STDIN_FILENO, EV_READ);
1127		1234
1128	=item C<ev_TYPE_set> (ev_TYPE *, [args])	1235	=item C<ev_TYPE_set> (ev_TYPE *watcher, [args])
1129		1236
1130	This macro initialises the type-specific parts of a watcher. You need to	1237	This macro initialises the type-specific parts of a watcher. You need to
1131	call C<ev_init> at least once before you call this macro, but you can	1238	call C<ev_init> at least once before you call this macro, but you can
1132	call C<ev_TYPE_set> any number of times. You must not, however, call this	1239	call C<ev_TYPE_set> any number of times. You must not, however, call this
1133	macro on a watcher that is active (it can be pending, however, which is a	1240	macro on a watcher that is active (it can be pending, however, which is a
…		…
1146		1253
1147	Example: Initialise and set an C<ev_io> watcher in one step.	1254	Example: Initialise and set an C<ev_io> watcher in one step.
1148		1255
1149	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);	1256	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);
1150		1257
1151	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)	1258	=item C<ev_TYPE_start> (loop, ev_TYPE *watcher)
1152		1259
1153	Starts (activates) the given watcher. Only active watchers will receive	1260	Starts (activates) the given watcher. Only active watchers will receive
1154	events. If the watcher is already active nothing will happen.	1261	events. If the watcher is already active nothing will happen.
1155		1262
1156	Example: Start the C<ev_io> watcher that is being abused as example in this	1263	Example: Start the C<ev_io> watcher that is being abused as example in this
1157	whole section.	1264	whole section.
1158		1265
1159	ev_io_start (EV_DEFAULT_UC, &w);	1266	ev_io_start (EV_DEFAULT_UC, &w);
1160		1267
1161	=item C<ev_TYPE_stop> (loop *, ev_TYPE *watcher)	1268	=item C<ev_TYPE_stop> (loop, ev_TYPE *watcher)
1162		1269
1163	Stops the given watcher if active, and clears the pending status (whether	1270	Stops the given watcher if active, and clears the pending status (whether
1164	the watcher was active or not).	1271	the watcher was active or not).
1165		1272
1166	It is possible that stopped watchers are pending - for example,	1273	It is possible that stopped watchers are pending - for example,
…		…
1191	=item ev_cb_set (ev_TYPE *watcher, callback)	1298	=item ev_cb_set (ev_TYPE *watcher, callback)
1192		1299
1193	Change the callback. You can change the callback at virtually any time	1300	Change the callback. You can change the callback at virtually any time
1194	(modulo threads).	1301	(modulo threads).
1195		1302
1196	=item ev_set_priority (ev_TYPE *watcher, priority)	1303	=item ev_set_priority (ev_TYPE *watcher, int priority)
1197		1304
1198	=item int ev_priority (ev_TYPE *watcher)	1305	=item int ev_priority (ev_TYPE *watcher)
1199		1306
1200	Set and query the priority of the watcher. The priority is a small	1307	Set and query the priority of the watcher. The priority is a small
1201	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>	1308	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
…		…
1232	returns its C<revents> bitset (as if its callback was invoked). If the	1339	returns its C<revents> bitset (as if its callback was invoked). If the
1233	watcher isn't pending it does nothing and returns C<0>.	1340	watcher isn't pending it does nothing and returns C<0>.
1234		1341
1235	Sometimes it can be useful to "poll" a watcher instead of waiting for its	1342	Sometimes it can be useful to "poll" a watcher instead of waiting for its
1236	callback to be invoked, which can be accomplished with this function.	1343	callback to be invoked, which can be accomplished with this function.
		1344
		1345	=item ev_feed_event (loop, ev_TYPE *watcher, int revents)
		1346
		1347	Feeds the given event set into the event loop, as if the specified event
		1348	had happened for the specified watcher (which must be a pointer to an
		1349	initialised but not necessarily started event watcher). Obviously you must
		1350	not free the watcher as long as it has pending events.
		1351
		1352	Stopping the watcher, letting libev invoke it, or calling
		1353	C<ev_clear_pending> will clear the pending event, even if the watcher was
		1354	not started in the first place.
		1355
		1356	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
		1357	functions that do not need a watcher.
1237		1358
1238	=back	1359	=back
1239		1360
1240		1361
1241	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	1362	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
…		…
1352		1473
1353	For example, to emulate how many other event libraries handle priorities,	1474	For example, to emulate how many other event libraries handle priorities,
1354	you can associate an C<ev_idle> watcher to each such watcher, and in	1475	you can associate an C<ev_idle> watcher to each such watcher, and in
1355	the normal watcher callback, you just start the idle watcher. The real	1476	the normal watcher callback, you just start the idle watcher. The real
1356	processing is done in the idle watcher callback. This causes libev to	1477	processing is done in the idle watcher callback. This causes libev to
1357	continously poll and process kernel event data for the watcher, but when	1478	continuously poll and process kernel event data for the watcher, but when
1358	the lock-out case is known to be rare (which in turn is rare :), this is	1479	the lock-out case is known to be rare (which in turn is rare :), this is
1359	workable.	1480	workable.
1360		1481
1361	Usually, however, the lock-out model implemented that way will perform	1482	Usually, however, the lock-out model implemented that way will perform
1362	miserably under the type of load it was designed to handle. In that case,	1483	miserably under the type of load it was designed to handle. In that case,
…		…
1376	{	1497	{
1377	// stop the I/O watcher, we received the event, but	1498	// stop the I/O watcher, we received the event, but
1378	// are not yet ready to handle it.	1499	// are not yet ready to handle it.
1379	ev_io_stop (EV_A_ w);	1500	ev_io_stop (EV_A_ w);
1380		1501
1381	// start the idle watcher to ahndle the actual event.	1502	// start the idle watcher to handle the actual event.
1382	// it will not be executed as long as other watchers	1503	// it will not be executed as long as other watchers
1383	// with the default priority are receiving events.	1504	// with the default priority are receiving events.
1384	ev_idle_start (EV_A_ &idle);	1505	ev_idle_start (EV_A_ &idle);
1385	}	1506	}
1386		1507
…		…
1440		1561
1441	If you cannot use non-blocking mode, then force the use of a	1562	If you cannot use non-blocking mode, then force the use of a
1442	known-to-be-good backend (at the time of this writing, this includes only	1563	known-to-be-good backend (at the time of this writing, this includes only
1443	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>). The same applies to file	1564	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>). The same applies to file
1444	descriptors for which non-blocking operation makes no sense (such as	1565	descriptors for which non-blocking operation makes no sense (such as
1445	files) - libev doesn't guarentee any specific behaviour in that case.	1566	files) - libev doesn't guarantee any specific behaviour in that case.
1446		1567
1447	Another thing you have to watch out for is that it is quite easy to	1568	Another thing you have to watch out for is that it is quite easy to
1448	receive "spurious" readiness notifications, that is your callback might	1569	receive "spurious" readiness notifications, that is your callback might
1449	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1570	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
1450	because there is no data. Not only are some backends known to create a	1571	because there is no data. Not only are some backends known to create a
…		…
1515		1636
1516	So when you encounter spurious, unexplained daemon exits, make sure you	1637	So when you encounter spurious, unexplained daemon exits, make sure you
1517	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon	1638	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
1518	somewhere, as that would have given you a big clue).	1639	somewhere, as that would have given you a big clue).
1519		1640
		1641	=head3 The special problem of accept()ing when you can't
		1642
		1643	Many implementations of the POSIX C<accept> function (for example,
		1644	found in post-2004 Linux) have the peculiar behaviour of not removing a
		1645	connection from the pending queue in all error cases.
		1646
		1647	For example, larger servers often run out of file descriptors (because
		1648	of resource limits), causing C<accept> to fail with C<ENFILE> but not
		1649	rejecting the connection, leading to libev signalling readiness on
		1650	the next iteration again (the connection still exists after all), and
		1651	typically causing the program to loop at 100% CPU usage.
		1652
		1653	Unfortunately, the set of errors that cause this issue differs between
		1654	operating systems, there is usually little the app can do to remedy the
		1655	situation, and no known thread-safe method of removing the connection to
		1656	cope with overload is known (to me).
		1657
		1658	One of the easiest ways to handle this situation is to just ignore it
		1659	- when the program encounters an overload, it will just loop until the
		1660	situation is over. While this is a form of busy waiting, no OS offers an
		1661	event-based way to handle this situation, so it's the best one can do.
		1662
		1663	A better way to handle the situation is to log any errors other than
		1664	C<EAGAIN> and C<EWOULDBLOCK>, making sure not to flood the log with such
		1665	messages, and continue as usual, which at least gives the user an idea of
		1666	what could be wrong ("raise the ulimit!"). For extra points one could stop
		1667	the C<ev_io> watcher on the listening fd "for a while", which reduces CPU
		1668	usage.
		1669
		1670	If your program is single-threaded, then you could also keep a dummy file
		1671	descriptor for overload situations (e.g. by opening F</dev/null>), and
		1672	when you run into C<ENFILE> or C<EMFILE>, close it, run C<accept>,
		1673	close that fd, and create a new dummy fd. This will gracefully refuse
		1674	clients under typical overload conditions.
		1675
		1676	The last way to handle it is to simply log the error and C<exit>, as
		1677	is often done with C<malloc> failures, but this results in an easy
		1678	opportunity for a DoS attack.
1520		1679
1521	=head3 Watcher-Specific Functions	1680	=head3 Watcher-Specific Functions
1522		1681
1523	=over 4	1682	=over 4
1524		1683
…		…
1556	...	1715	...
1557	struct ev_loop *loop = ev_default_init (0);	1716	struct ev_loop *loop = ev_default_init (0);
1558	ev_io stdin_readable;	1717	ev_io stdin_readable;
1559	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);	1718	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
1560	ev_io_start (loop, &stdin_readable);	1719	ev_io_start (loop, &stdin_readable);
1561	ev_loop (loop, 0);	1720	ev_run (loop, 0);
1562		1721
1563		1722
1564	=head2 C<ev_timer> - relative and optionally repeating timeouts	1723	=head2 C<ev_timer> - relative and optionally repeating timeouts
1565		1724
1566	Timer watchers are simple relative timers that generate an event after a	1725	Timer watchers are simple relative timers that generate an event after a
…		…
1575	The callback is guaranteed to be invoked only I<after> its timeout has	1734	The callback is guaranteed to be invoked only I<after> its timeout has
1576	passed (not I<at>, so on systems with very low-resolution clocks this	1735	passed (not I<at>, so on systems with very low-resolution clocks this
1577	might introduce a small delay). If multiple timers become ready during the	1736	might introduce a small delay). If multiple timers become ready during the
1578	same loop iteration then the ones with earlier time-out values are invoked	1737	same loop iteration then the ones with earlier time-out values are invoked
1579	before ones of the same priority with later time-out values (but this is	1738	before ones of the same priority with later time-out values (but this is
1580	no longer true when a callback calls C<ev_loop> recursively).	1739	no longer true when a callback calls C<ev_run> recursively).
1581		1740
1582	=head3 Be smart about timeouts	1741	=head3 Be smart about timeouts
1583		1742
1584	Many real-world problems involve some kind of timeout, usually for error	1743	Many real-world problems involve some kind of timeout, usually for error
1585	recovery. A typical example is an HTTP request - if the other side hangs,	1744	recovery. A typical example is an HTTP request - if the other side hangs,
…		…
1671	ev_tstamp timeout = last_activity + 60.;	1830	ev_tstamp timeout = last_activity + 60.;
1672		1831
1673	// if last_activity + 60. is older than now, we did time out	1832	// if last_activity + 60. is older than now, we did time out
1674	if (timeout < now)	1833	if (timeout < now)
1675	{	1834	{
1676	// timeout occured, take action	1835	// timeout occurred, take action
1677	}	1836	}
1678	else	1837	else
1679	{	1838	{
1680	// callback was invoked, but there was some activity, re-arm	1839	// callback was invoked, but there was some activity, re-arm
1681	// the watcher to fire in last_activity + 60, which is	1840	// the watcher to fire in last_activity + 60, which is
…		…
1703	to the current time (meaning we just have some activity :), then call the	1862	to the current time (meaning we just have some activity :), then call the
1704	callback, which will "do the right thing" and start the timer:	1863	callback, which will "do the right thing" and start the timer:
1705		1864
1706	ev_init (timer, callback);	1865	ev_init (timer, callback);
1707	last_activity = ev_now (loop);	1866	last_activity = ev_now (loop);
1708	callback (loop, timer, EV_TIMEOUT);	1867	callback (loop, timer, EV_TIMER);
1709		1868
1710	And when there is some activity, simply store the current time in	1869	And when there is some activity, simply store the current time in
1711	C<last_activity>, no libev calls at all:	1870	C<last_activity>, no libev calls at all:
1712		1871
1713	last_actiivty = ev_now (loop);	1872	last_activity = ev_now (loop);
1714		1873
1715	This technique is slightly more complex, but in most cases where the	1874	This technique is slightly more complex, but in most cases where the
1716	time-out is unlikely to be triggered, much more efficient.	1875	time-out is unlikely to be triggered, much more efficient.
1717		1876
1718	Changing the timeout is trivial as well (if it isn't hard-coded in the	1877	Changing the timeout is trivial as well (if it isn't hard-coded in the
…		…
1756		1915
1757	=head3 The special problem of time updates	1916	=head3 The special problem of time updates
1758		1917
1759	Establishing the current time is a costly operation (it usually takes at	1918	Establishing the current time is a costly operation (it usually takes at
1760	least two system calls): EV therefore updates its idea of the current	1919	least two system calls): EV therefore updates its idea of the current
1761	time only before and after C<ev_loop> collects new events, which causes a	1920	time only before and after C<ev_run> collects new events, which causes a
1762	growing difference between C<ev_now ()> and C<ev_time ()> when handling	1921	growing difference between C<ev_now ()> and C<ev_time ()> when handling
1763	lots of events in one iteration.	1922	lots of events in one iteration.
1764		1923
1765	The relative timeouts are calculated relative to the C<ev_now ()>	1924	The relative timeouts are calculated relative to the C<ev_now ()>
1766	time. This is usually the right thing as this timestamp refers to the time	1925	time. This is usually the right thing as this timestamp refers to the time
…		…
1837	C<repeat> value), or reset the running timer to the C<repeat> value.	1996	C<repeat> value), or reset the running timer to the C<repeat> value.
1838		1997
1839	This sounds a bit complicated, see L<Be smart about timeouts>, above, for a	1998	This sounds a bit complicated, see L<Be smart about timeouts>, above, for a
1840	usage example.	1999	usage example.
1841		2000
1842	=item ev_timer_remaining (loop, ev_timer *)	2001	=item ev_tstamp ev_timer_remaining (loop, ev_timer *)
1843		2002
1844	Returns the remaining time until a timer fires. If the timer is active,	2003	Returns the remaining time until a timer fires. If the timer is active,
1845	then this time is relative to the current event loop time, otherwise it's	2004	then this time is relative to the current event loop time, otherwise it's
1846	the timeout value currently configured.	2005	the timeout value currently configured.
1847		2006
1848	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns	2007	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns
1849	C<5>. When the timer is started and one second passes, C<ev_timer_remain>	2008	C<5>. When the timer is started and one second passes, C<ev_timer_remaining>
1850	will return C<4>. When the timer expires and is restarted, it will return	2009	will return C<4>. When the timer expires and is restarted, it will return
1851	roughly C<7> (likely slightly less as callback invocation takes some time,	2010	roughly C<7> (likely slightly less as callback invocation takes some time,
1852	too), and so on.	2011	too), and so on.
1853		2012
1854	=item ev_tstamp repeat [read-write]	2013	=item ev_tstamp repeat [read-write]
…		…
1883	}	2042	}
1884		2043
1885	ev_timer mytimer;	2044	ev_timer mytimer;
1886	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */	2045	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
1887	ev_timer_again (&mytimer); /* start timer */	2046	ev_timer_again (&mytimer); /* start timer */
1888	ev_loop (loop, 0);	2047	ev_run (loop, 0);
1889		2048
1890	// and in some piece of code that gets executed on any "activity":	2049	// and in some piece of code that gets executed on any "activity":
1891	// reset the timeout to start ticking again at 10 seconds	2050	// reset the timeout to start ticking again at 10 seconds
1892	ev_timer_again (&mytimer);	2051	ev_timer_again (&mytimer);
1893		2052
…		…
1919		2078
1920	As with timers, the callback is guaranteed to be invoked only when the	2079	As with timers, the callback is guaranteed to be invoked only when the
1921	point in time where it is supposed to trigger has passed. If multiple	2080	point in time where it is supposed to trigger has passed. If multiple
1922	timers become ready during the same loop iteration then the ones with	2081	timers become ready during the same loop iteration then the ones with
1923	earlier time-out values are invoked before ones with later time-out values	2082	earlier time-out values are invoked before ones with later time-out values
1924	(but this is no longer true when a callback calls C<ev_loop> recursively).	2083	(but this is no longer true when a callback calls C<ev_run> recursively).
1925		2084
1926	=head3 Watcher-Specific Functions and Data Members	2085	=head3 Watcher-Specific Functions and Data Members
1927		2086
1928	=over 4	2087	=over 4
1929		2088
…		…
2057	Example: Call a callback every hour, or, more precisely, whenever the	2216	Example: Call a callback every hour, or, more precisely, whenever the
2058	system time is divisible by 3600. The callback invocation times have	2217	system time is divisible by 3600. The callback invocation times have
2059	potentially a lot of jitter, but good long-term stability.	2218	potentially a lot of jitter, but good long-term stability.
2060		2219
2061	static void	2220	static void
2062	clock_cb (struct ev_loop *loop, ev_io *w, int revents)	2221	clock_cb (struct ev_loop *loop, ev_periodic *w, int revents)
2063	{	2222	{
2064	... its now a full hour (UTC, or TAI or whatever your clock follows)	2223	... its now a full hour (UTC, or TAI or whatever your clock follows)
2065	}	2224	}
2066		2225
2067	ev_periodic hourly_tick;	2226	ev_periodic hourly_tick;
…		…
2108		2267
2109	When the first watcher gets started will libev actually register something	2268	When the first watcher gets started will libev actually register something
2110	with the kernel (thus it coexists with your own signal handlers as long as	2269	with the kernel (thus it coexists with your own signal handlers as long as
2111	you don't register any with libev for the same signal).	2270	you don't register any with libev for the same signal).
2112		2271
2113	Both the signal mask state (C<sigprocmask>) and the signal handler state
2114	(C<sigaction>) are unspecified after starting a signal watcher (and after
2115	sotpping it again), that is, libev might or might not block the signal,
2116	and might or might not set or restore the installed signal handler.
2117
2118	If possible and supported, libev will install its handlers with	2272	If possible and supported, libev will install its handlers with
2119	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should	2273	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should
2120	not be unduly interrupted. If you have a problem with system calls getting	2274	not be unduly interrupted. If you have a problem with system calls getting
2121	interrupted by signals you can block all signals in an C<ev_check> watcher	2275	interrupted by signals you can block all signals in an C<ev_check> watcher
2122	and unblock them in an C<ev_prepare> watcher.	2276	and unblock them in an C<ev_prepare> watcher.
2123		2277
		2278	=head3 The special problem of inheritance over fork/execve/pthread_create
		2279
		2280	Both the signal mask (C<sigprocmask>) and the signal disposition
		2281	(C<sigaction>) are unspecified after starting a signal watcher (and after
		2282	stopping it again), that is, libev might or might not block the signal,
		2283	and might or might not set or restore the installed signal handler.
		2284
		2285	While this does not matter for the signal disposition (libev never
		2286	sets signals to C<SIG_IGN>, so handlers will be reset to C<SIG_DFL> on
		2287	C<execve>), this matters for the signal mask: many programs do not expect
		2288	certain signals to be blocked.
		2289
		2290	This means that before calling C<exec> (from the child) you should reset
		2291	the signal mask to whatever "default" you expect (all clear is a good
		2292	choice usually).
		2293
		2294	The simplest way to ensure that the signal mask is reset in the child is
		2295	to install a fork handler with C<pthread_atfork> that resets it. That will
		2296	catch fork calls done by libraries (such as the libc) as well.
		2297
		2298	In current versions of libev, the signal will not be blocked indefinitely
		2299	unless you use the C<signalfd> API (C<EV_SIGNALFD>). While this reduces
		2300	the window of opportunity for problems, it will not go away, as libev
		2301	I<has> to modify the signal mask, at least temporarily.
		2302
		2303	So I can't stress this enough: I<If you do not reset your signal mask when
		2304	you expect it to be empty, you have a race condition in your code>. This
		2305	is not a libev-specific thing, this is true for most event libraries.
		2306
2124	=head3 Watcher-Specific Functions and Data Members	2307	=head3 Watcher-Specific Functions and Data Members
2125		2308
2126	=over 4	2309	=over 4
2127		2310
2128	=item ev_signal_init (ev_signal *, callback, int signum)	2311	=item ev_signal_init (ev_signal *, callback, int signum)
…		…
2143	Example: Try to exit cleanly on SIGINT.	2326	Example: Try to exit cleanly on SIGINT.
2144		2327
2145	static void	2328	static void
2146	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)	2329	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)
2147	{	2330	{
2148	ev_unloop (loop, EVUNLOOP_ALL);	2331	ev_break (loop, EVBREAK_ALL);
2149	}	2332	}
2150		2333
2151	ev_signal signal_watcher;	2334	ev_signal signal_watcher;
2152	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	2335	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
2153	ev_signal_start (loop, &signal_watcher);	2336	ev_signal_start (loop, &signal_watcher);
…		…
2539		2722
2540	Prepare and check watchers are usually (but not always) used in pairs:	2723	Prepare and check watchers are usually (but not always) used in pairs:
2541	prepare watchers get invoked before the process blocks and check watchers	2724	prepare watchers get invoked before the process blocks and check watchers
2542	afterwards.	2725	afterwards.
2543		2726
2544	You I<must not> call C<ev_loop> or similar functions that enter	2727	You I<must not> call C<ev_run> or similar functions that enter
2545	the current event loop from either C<ev_prepare> or C<ev_check>	2728	the current event loop from either C<ev_prepare> or C<ev_check>
2546	watchers. Other loops than the current one are fine, however. The	2729	watchers. Other loops than the current one are fine, however. The
2547	rationale behind this is that you do not need to check for recursion in	2730	rationale behind this is that you do not need to check for recursion in
2548	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,	2731	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,
2549	C<ev_check> so if you have one watcher of each kind they will always be	2732	C<ev_check> so if you have one watcher of each kind they will always be
…		…
2717		2900
2718	if (timeout >= 0)	2901	if (timeout >= 0)
2719	// create/start timer	2902	// create/start timer
2720		2903
2721	// poll	2904	// poll
2722	ev_loop (EV_A_ 0);	2905	ev_run (EV_A_ 0);
2723		2906
2724	// stop timer again	2907	// stop timer again
2725	if (timeout >= 0)	2908	if (timeout >= 0)
2726	ev_timer_stop (EV_A_ &to);	2909	ev_timer_stop (EV_A_ &to);
2727		2910
…		…
2805	if you do not want that, you need to temporarily stop the embed watcher).	2988	if you do not want that, you need to temporarily stop the embed watcher).
2806		2989
2807	=item ev_embed_sweep (loop, ev_embed *)	2990	=item ev_embed_sweep (loop, ev_embed *)
2808		2991
2809	Make a single, non-blocking sweep over the embedded loop. This works	2992	Make a single, non-blocking sweep over the embedded loop. This works
2810	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	2993	similarly to C<ev_run (embedded_loop, EVRUN_NOWAIT)>, but in the most
2811	appropriate way for embedded loops.	2994	appropriate way for embedded loops.
2812		2995
2813	=item struct ev_loop *other [read-only]	2996	=item struct ev_loop *other [read-only]
2814		2997
2815	The embedded event loop.	2998	The embedded event loop.
…		…
2875	C<ev_default_fork> cheats and calls it in the wrong process, the fork	3058	C<ev_default_fork> cheats and calls it in the wrong process, the fork
2876	handlers will be invoked, too, of course.	3059	handlers will be invoked, too, of course.
2877		3060
2878	=head3 The special problem of life after fork - how is it possible?	3061	=head3 The special problem of life after fork - how is it possible?
2879		3062
2880	Most uses of C<fork()> consist of forking, then some simple calls to ste	3063	Most uses of C<fork()> consist of forking, then some simple calls to set
2881	up/change the process environment, followed by a call to C<exec()>. This	3064	up/change the process environment, followed by a call to C<exec()>. This
2882	sequence should be handled by libev without any problems.	3065	sequence should be handled by libev without any problems.
2883		3066
2884	This changes when the application actually wants to do event handling	3067	This changes when the application actually wants to do event handling
2885	in the child, or both parent in child, in effect "continuing" after the	3068	in the child, or both parent in child, in effect "continuing" after the
…		…
2901	disadvantage of having to use multiple event loops (which do not support	3084	disadvantage of having to use multiple event loops (which do not support
2902	signal watchers).	3085	signal watchers).
2903		3086
2904	When this is not possible, or you want to use the default loop for	3087	When this is not possible, or you want to use the default loop for
2905	other reasons, then in the process that wants to start "fresh", call	3088	other reasons, then in the process that wants to start "fresh", call
2906	C<ev_default_destroy ()> followed by C<ev_default_loop (...)>. Destroying	3089	C<ev_loop_destroy (EV_DEFAULT)> followed by C<ev_default_loop (...)>.
2907	the default loop will "orphan" (not stop) all registered watchers, so you	3090	Destroying the default loop will "orphan" (not stop) all registered
2908	have to be careful not to execute code that modifies those watchers. Note	3091	watchers, so you have to be careful not to execute code that modifies
2909	also that in that case, you have to re-register any signal watchers.	3092	those watchers. Note also that in that case, you have to re-register any
		3093	signal watchers.
2910		3094
2911	=head3 Watcher-Specific Functions and Data Members	3095	=head3 Watcher-Specific Functions and Data Members
2912		3096
2913	=over 4	3097	=over 4
2914		3098
2915	=item ev_fork_init (ev_signal *, callback)	3099	=item ev_fork_init (ev_fork *, callback)
2916		3100
2917	Initialises and configures the fork watcher - it has no parameters of any	3101	Initialises and configures the fork watcher - it has no parameters of any
2918	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	3102	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
2919	believe me.	3103	believe me.
2920		3104
2921	=back	3105	=back
2922		3106
2923		3107
		3108	=head2 C<ev_cleanup> - even the best things end
		3109
		3110	Cleanup watchers are called just before the event loop they are registered
		3111	with is being destroyed.
		3112
		3113	While there is no guarantee that the event loop gets destroyed, cleanup
		3114	watchers provide a convenient method to install cleanup hooks for your
		3115	program, worker threads and so on - you just to make sure to destroy the
		3116	loop when you want them to be invoked.
		3117
		3118	Cleanup watchers are invoked in the same way as any other watcher. Unlike
		3119	all other watchers, they do not keep a reference to the event loop (which
		3120	makes a lot of sense if you think about it). Like all other watchers, you
		3121	can call libev functions in the callback, except C<ev_cleanup_start>.
		3122
		3123	=head3 Watcher-Specific Functions and Data Members
		3124
		3125	=over 4
		3126
		3127	=item ev_cleanup_init (ev_cleanup *, callback)
		3128
		3129	Initialises and configures the cleanup watcher - it has no parameters of
		3130	any kind. There is a C<ev_cleanup_set> macro, but using it is utterly
		3131	pointless, believe me.
		3132
		3133	=back
		3134
		3135	Example: Register an atexit handler to destroy the default loop, so any
		3136	cleanup functions are called.
		3137
		3138	static void
		3139	program_exits (void)
		3140	{
		3141	ev_loop_destroy (EV_DEFAULT_UC);
		3142	}
		3143
		3144	...
		3145	atexit (program_exits);
		3146
		3147
2924	=head2 C<ev_async> - how to wake up another event loop	3148	=head2 C<ev_async> - how to wake up an event loop
2925		3149
2926	In general, you cannot use an C<ev_loop> from multiple threads or other	3150	In general, you cannot use an C<ev_run> from multiple threads or other
2927	asynchronous sources such as signal handlers (as opposed to multiple event	3151	asynchronous sources such as signal handlers (as opposed to multiple event
2928	loops - those are of course safe to use in different threads).	3152	loops - those are of course safe to use in different threads).
2929		3153
2930	Sometimes, however, you need to wake up another event loop you do not	3154	Sometimes, however, you need to wake up an event loop you do not control,
2931	control, for example because it belongs to another thread. This is what	3155	for example because it belongs to another thread. This is what C<ev_async>
2932	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you	3156	watchers do: as long as the C<ev_async> watcher is active, you can signal
2933	can signal it by calling C<ev_async_send>, which is thread- and signal	3157	it by calling C<ev_async_send>, which is thread- and signal safe.
2934	safe.
2935		3158
2936	This functionality is very similar to C<ev_signal> watchers, as signals,	3159	This functionality is very similar to C<ev_signal> watchers, as signals,
2937	too, are asynchronous in nature, and signals, too, will be compressed	3160	too, are asynchronous in nature, and signals, too, will be compressed
2938	(i.e. the number of callback invocations may be less than the number of	3161	(i.e. the number of callback invocations may be less than the number of
2939	C<ev_async_sent> calls).	3162	C<ev_async_sent> calls).
…		…
2944	=head3 Queueing	3167	=head3 Queueing
2945		3168
2946	C<ev_async> does not support queueing of data in any way. The reason	3169	C<ev_async> does not support queueing of data in any way. The reason
2947	is that the author does not know of a simple (or any) algorithm for a	3170	is that the author does not know of a simple (or any) algorithm for a
2948	multiple-writer-single-reader queue that works in all cases and doesn't	3171	multiple-writer-single-reader queue that works in all cases and doesn't
2949	need elaborate support such as pthreads.	3172	need elaborate support such as pthreads or unportable memory access
		3173	semantics.
2950		3174
2951	That means that if you want to queue data, you have to provide your own	3175	That means that if you want to queue data, you have to provide your own
2952	queue. But at least I can tell you how to implement locking around your	3176	queue. But at least I can tell you how to implement locking around your
2953	queue:	3177	queue:
2954		3178
…		…
3093		3317
3094	If C<timeout> is less than 0, then no timeout watcher will be	3318	If C<timeout> is less than 0, then no timeout watcher will be
3095	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and	3319	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
3096	repeat = 0) will be started. C<0> is a valid timeout.	3320	repeat = 0) will be started. C<0> is a valid timeout.
3097		3321
3098	The callback has the type C<void (*cb)(int revents, void *arg)> and gets	3322	The callback has the type C<void (*cb)(int revents, void *arg)> and is
3099	passed an C<revents> set like normal event callbacks (a combination of	3323	passed an C<revents> set like normal event callbacks (a combination of
3100	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>	3324	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMER>) and the C<arg>
3101	value passed to C<ev_once>. Note that it is possible to receive I<both>	3325	value passed to C<ev_once>. Note that it is possible to receive I<both>
3102	a timeout and an io event at the same time - you probably should give io	3326	a timeout and an io event at the same time - you probably should give io
3103	events precedence.	3327	events precedence.
3104		3328
3105	Example: wait up to ten seconds for data to appear on STDIN_FILENO.	3329	Example: wait up to ten seconds for data to appear on STDIN_FILENO.
3106		3330
3107	static void stdin_ready (int revents, void *arg)	3331	static void stdin_ready (int revents, void *arg)
3108	{	3332	{
3109	if (revents & EV_READ)	3333	if (revents & EV_READ)
3110	/* stdin might have data for us, joy! */;	3334	/* stdin might have data for us, joy! */;
3111	else if (revents & EV_TIMEOUT)	3335	else if (revents & EV_TIMER)
3112	/* doh, nothing entered */;	3336	/* doh, nothing entered */;
3113	}	3337	}
3114		3338
3115	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	3339	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
3116		3340
3117	=item ev_feed_event (struct ev_loop *, watcher *, int revents)
3118
3119	Feeds the given event set into the event loop, as if the specified event
3120	had happened for the specified watcher (which must be a pointer to an
3121	initialised but not necessarily started event watcher).
3122
3123	=item ev_feed_fd_event (struct ev_loop *, int fd, int revents)	3341	=item ev_feed_fd_event (loop, int fd, int revents)
3124		3342
3125	Feed an event on the given fd, as if a file descriptor backend detected	3343	Feed an event on the given fd, as if a file descriptor backend detected
3126	the given events it.	3344	the given events it.
3127		3345
3128	=item ev_feed_signal_event (struct ev_loop *loop, int signum)	3346	=item ev_feed_signal_event (loop, int signum)
3129		3347
3130	Feed an event as if the given signal occurred (C<loop> must be the default	3348	Feed an event as if the given signal occurred (C<loop> must be the default
3131	loop!).	3349	loop!).
3132		3350
3133	=back	3351	=back
…		…
3213		3431
3214	=over 4	3432	=over 4
3215		3433
3216	=item ev::TYPE::TYPE ()	3434	=item ev::TYPE::TYPE ()
3217		3435
3218	=item ev::TYPE::TYPE (struct ev_loop *)	3436	=item ev::TYPE::TYPE (loop)
3219		3437
3220	=item ev::TYPE::~TYPE	3438	=item ev::TYPE::~TYPE
3221		3439
3222	The constructor (optionally) takes an event loop to associate the watcher	3440	The constructor (optionally) takes an event loop to associate the watcher
3223	with. If it is omitted, it will use C<EV_DEFAULT>.	3441	with. If it is omitted, it will use C<EV_DEFAULT>.
…		…
3256	myclass obj;	3474	myclass obj;
3257	ev::io iow;	3475	ev::io iow;
3258	iow.set <myclass, &myclass::io_cb> (&obj);	3476	iow.set <myclass, &myclass::io_cb> (&obj);
3259		3477
3260	=item w->set (object *)	3478	=item w->set (object *)
3261
3262	This is an B<experimental> feature that might go away in a future version.
3263		3479
3264	This is a variation of a method callback - leaving out the method to call	3480	This is a variation of a method callback - leaving out the method to call
3265	will default the method to C<operator ()>, which makes it possible to use	3481	will default the method to C<operator ()>, which makes it possible to use
3266	functor objects without having to manually specify the C<operator ()> all	3482	functor objects without having to manually specify the C<operator ()> all
3267	the time. Incidentally, you can then also leave out the template argument	3483	the time. Incidentally, you can then also leave out the template argument
…		…
3300	Example: Use a plain function as callback.	3516	Example: Use a plain function as callback.
3301		3517
3302	static void io_cb (ev::io &w, int revents) { }	3518	static void io_cb (ev::io &w, int revents) { }
3303	iow.set <io_cb> ();	3519	iow.set <io_cb> ();
3304		3520
3305	=item w->set (struct ev_loop *)	3521	=item w->set (loop)
3306		3522
3307	Associates a different C<struct ev_loop> with this watcher. You can only	3523	Associates a different C<struct ev_loop> with this watcher. You can only
3308	do this when the watcher is inactive (and not pending either).	3524	do this when the watcher is inactive (and not pending either).
3309		3525
3310	=item w->set ([arguments])	3526	=item w->set ([arguments])
3311		3527
3312	Basically the same as C<ev_TYPE_set>, with the same arguments. Must be	3528	Basically the same as C<ev_TYPE_set>, with the same arguments. Either this
3313	called at least once. Unlike the C counterpart, an active watcher gets	3529	method or a suitable start method must be called at least once. Unlike the
3314	automatically stopped and restarted when reconfiguring it with this	3530	C counterpart, an active watcher gets automatically stopped and restarted
3315	method.	3531	when reconfiguring it with this method.
3316		3532
3317	=item w->start ()	3533	=item w->start ()
3318		3534
3319	Starts the watcher. Note that there is no C<loop> argument, as the	3535	Starts the watcher. Note that there is no C<loop> argument, as the
3320	constructor already stores the event loop.	3536	constructor already stores the event loop.
3321		3537
		3538	=item w->start ([arguments])
		3539
		3540	Instead of calling C<set> and C<start> methods separately, it is often
		3541	convenient to wrap them in one call. Uses the same type of arguments as
		3542	the configure C<set> method of the watcher.
		3543
3322	=item w->stop ()	3544	=item w->stop ()
3323		3545
3324	Stops the watcher if it is active. Again, no C<loop> argument.	3546	Stops the watcher if it is active. Again, no C<loop> argument.
3325		3547
3326	=item w->again () (C<ev::timer>, C<ev::periodic> only)	3548	=item w->again () (C<ev::timer>, C<ev::periodic> only)
…		…
3338		3560
3339	=back	3561	=back
3340		3562
3341	=back	3563	=back
3342		3564
3343	Example: Define a class with an IO and idle watcher, start one of them in	3565	Example: Define a class with two I/O and idle watchers, start the I/O
3344	the constructor.	3566	watchers in the constructor.
3345		3567
3346	class myclass	3568	class myclass
3347	{	3569	{
3348	ev::io io ; void io_cb (ev::io &w, int revents);	3570	ev::io io ; void io_cb (ev::io &w, int revents);
		3571	ev::io2 io2 ; void io2_cb (ev::io &w, int revents);
3349	ev::idle idle; void idle_cb (ev::idle &w, int revents);	3572	ev::idle idle; void idle_cb (ev::idle &w, int revents);
3350		3573
3351	myclass (int fd)	3574	myclass (int fd)
3352	{	3575	{
3353	io .set <myclass, &myclass::io_cb > (this);	3576	io .set <myclass, &myclass::io_cb > (this);
		3577	io2 .set <myclass, &myclass::io2_cb > (this);
3354	idle.set <myclass, &myclass::idle_cb> (this);	3578	idle.set <myclass, &myclass::idle_cb> (this);
3355		3579
3356	io.start (fd, ev::READ);	3580	io.set (fd, ev::WRITE); // configure the watcher
		3581	io.start (); // start it whenever convenient
		3582
		3583	io2.start (fd, ev::READ); // set + start in one call
3357	}	3584	}
3358	};	3585	};
3359		3586
3360		3587
3361	=head1 OTHER LANGUAGE BINDINGS	3588	=head1 OTHER LANGUAGE BINDINGS
…		…
3409	Erkki Seppala has written Ocaml bindings for libev, to be found at	3636	Erkki Seppala has written Ocaml bindings for libev, to be found at
3410	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.	3637	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.
3411		3638
3412	=item Lua	3639	=item Lua
3413		3640
3414	Brian Maher has written a partial interface to libev	3641	Brian Maher has written a partial interface to libev for lua (at the
3415	for lua (only C<ev_io> and C<ev_timer>), to be found at	3642	time of this writing, only C<ev_io> and C<ev_timer>), to be found at
3416	L<http://github.com/brimworks/lua-ev>.	3643	L<http://github.com/brimworks/lua-ev>.
3417		3644
3418	=back	3645	=back
3419		3646
3420		3647
…		…
3435	loop argument"). The C<EV_A> form is used when this is the sole argument,	3662	loop argument"). The C<EV_A> form is used when this is the sole argument,
3436	C<EV_A_> is used when other arguments are following. Example:	3663	C<EV_A_> is used when other arguments are following. Example:
3437		3664
3438	ev_unref (EV_A);	3665	ev_unref (EV_A);
3439	ev_timer_add (EV_A_ watcher);	3666	ev_timer_add (EV_A_ watcher);
3440	ev_loop (EV_A_ 0);	3667	ev_run (EV_A_ 0);
3441		3668
3442	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,	3669	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
3443	which is often provided by the following macro.	3670	which is often provided by the following macro.
3444		3671
3445	=item C<EV_P>, C<EV_P_>	3672	=item C<EV_P>, C<EV_P_>
…		…
3485	}	3712	}
3486		3713
3487	ev_check check;	3714	ev_check check;
3488	ev_check_init (&check, check_cb);	3715	ev_check_init (&check, check_cb);
3489	ev_check_start (EV_DEFAULT_ &check);	3716	ev_check_start (EV_DEFAULT_ &check);
3490	ev_loop (EV_DEFAULT_ 0);	3717	ev_run (EV_DEFAULT_ 0);
3491		3718
3492	=head1 EMBEDDING	3719	=head1 EMBEDDING
3493		3720
3494	Libev can (and often is) directly embedded into host	3721	Libev can (and often is) directly embedded into host
3495	applications. Examples of applications that embed it include the Deliantra	3722	applications. Examples of applications that embed it include the Deliantra
…		…
3575	libev.m4	3802	libev.m4
3576		3803
3577	=head2 PREPROCESSOR SYMBOLS/MACROS	3804	=head2 PREPROCESSOR SYMBOLS/MACROS
3578		3805
3579	Libev can be configured via a variety of preprocessor symbols you have to	3806	Libev can be configured via a variety of preprocessor symbols you have to
3580	define before including any of its files. The default in the absence of	3807	define before including (or compiling) any of its files. The default in
3581	autoconf is documented for every option.	3808	the absence of autoconf is documented for every option.
		3809
		3810	Symbols marked with "(h)" do not change the ABI, and can have different
		3811	values when compiling libev vs. including F<ev.h>, so it is permissible
		3812	to redefine them before including F<ev.h> without breaking compatibility
		3813	to a compiled library. All other symbols change the ABI, which means all
		3814	users of libev and the libev code itself must be compiled with compatible
		3815	settings.
3582		3816
3583	=over 4	3817	=over 4
3584		3818
		3819	=item EV_COMPAT3 (h)
		3820
		3821	Backwards compatibility is a major concern for libev. This is why this
		3822	release of libev comes with wrappers for the functions and symbols that
		3823	have been renamed between libev version 3 and 4.
		3824
		3825	You can disable these wrappers (to test compatibility with future
		3826	versions) by defining C<EV_COMPAT3> to C<0> when compiling your
		3827	sources. This has the additional advantage that you can drop the C<struct>
		3828	from C<struct ev_loop> declarations, as libev will provide an C<ev_loop>
		3829	typedef in that case.
		3830
		3831	In some future version, the default for C<EV_COMPAT3> will become C<0>,
		3832	and in some even more future version the compatibility code will be
		3833	removed completely.
		3834
3585	=item EV_STANDALONE	3835	=item EV_STANDALONE (h)
3586		3836
3587	Must always be C<1> if you do not use autoconf configuration, which	3837	Must always be C<1> if you do not use autoconf configuration, which
3588	keeps libev from including F<config.h>, and it also defines dummy	3838	keeps libev from including F<config.h>, and it also defines dummy
3589	implementations for some libevent functions (such as logging, which is not	3839	implementations for some libevent functions (such as logging, which is not
3590	supported). It will also not define any of the structs usually found in	3840	supported). It will also not define any of the structs usually found in
…		…
3663	be used is the winsock select). This means that it will call	3913	be used is the winsock select). This means that it will call
3664	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	3914	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
3665	it is assumed that all these functions actually work on fds, even	3915	it is assumed that all these functions actually work on fds, even
3666	on win32. Should not be defined on non-win32 platforms.	3916	on win32. Should not be defined on non-win32 platforms.
3667		3917
3668	=item EV_FD_TO_WIN32_HANDLE	3918	=item EV_FD_TO_WIN32_HANDLE(fd)
3669		3919
3670	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map	3920	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
3671	file descriptors to socket handles. When not defining this symbol (the	3921	file descriptors to socket handles. When not defining this symbol (the
3672	default), then libev will call C<_get_osfhandle>, which is usually	3922	default), then libev will call C<_get_osfhandle>, which is usually
3673	correct. In some cases, programs use their own file descriptor management,	3923	correct. In some cases, programs use their own file descriptor management,
3674	in which case they can provide this function to map fds to socket handles.	3924	in which case they can provide this function to map fds to socket handles.
		3925
		3926	=item EV_WIN32_HANDLE_TO_FD(handle)
		3927
		3928	If C<EV_SELECT_IS_WINSOCKET> then libev maps handles to file descriptors
		3929	using the standard C<_open_osfhandle> function. For programs implementing
		3930	their own fd to handle mapping, overwriting this function makes it easier
		3931	to do so. This can be done by defining this macro to an appropriate value.
		3932
		3933	=item EV_WIN32_CLOSE_FD(fd)
		3934
		3935	If programs implement their own fd to handle mapping on win32, then this
		3936	macro can be used to override the C<close> function, useful to unregister
		3937	file descriptors again. Note that the replacement function has to close
		3938	the underlying OS handle.
3675		3939
3676	=item EV_USE_POLL	3940	=item EV_USE_POLL
3677		3941
3678	If defined to be C<1>, libev will compile in support for the C<poll>(2)	3942	If defined to be C<1>, libev will compile in support for the C<poll>(2)
3679	backend. Otherwise it will be enabled on non-win32 platforms. It	3943	backend. Otherwise it will be enabled on non-win32 platforms. It
…		…
3726	as well as for signal and thread safety in C<ev_async> watchers.	3990	as well as for signal and thread safety in C<ev_async> watchers.
3727		3991
3728	In the absence of this define, libev will use C<sig_atomic_t volatile>	3992	In the absence of this define, libev will use C<sig_atomic_t volatile>
3729	(from F<signal.h>), which is usually good enough on most platforms.	3993	(from F<signal.h>), which is usually good enough on most platforms.
3730		3994
3731	=item EV_H	3995	=item EV_H (h)
3732		3996
3733	The name of the F<ev.h> header file used to include it. The default if	3997	The name of the F<ev.h> header file used to include it. The default if
3734	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be	3998	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
3735	used to virtually rename the F<ev.h> header file in case of conflicts.	3999	used to virtually rename the F<ev.h> header file in case of conflicts.
3736		4000
3737	=item EV_CONFIG_H	4001	=item EV_CONFIG_H (h)
3738		4002
3739	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	4003	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
3740	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	4004	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
3741	C<EV_H>, above.	4005	C<EV_H>, above.
3742		4006
3743	=item EV_EVENT_H	4007	=item EV_EVENT_H (h)
3744		4008
3745	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	4009	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
3746	of how the F<event.h> header can be found, the default is C<"event.h">.	4010	of how the F<event.h> header can be found, the default is C<"event.h">.
3747		4011
3748	=item EV_PROTOTYPES	4012	=item EV_PROTOTYPES (h)
3749		4013
3750	If defined to be C<0>, then F<ev.h> will not define any function	4014	If defined to be C<0>, then F<ev.h> will not define any function
3751	prototypes, but still define all the structs and other symbols. This is	4015	prototypes, but still define all the structs and other symbols. This is
3752	occasionally useful if you want to provide your own wrapper functions	4016	occasionally useful if you want to provide your own wrapper functions
3753	around libev functions.	4017	around libev functions.
…		…
3775	fine.	4039	fine.
3776		4040
3777	If your embedding application does not need any priorities, defining these	4041	If your embedding application does not need any priorities, defining these
3778	both to C<0> will save some memory and CPU.	4042	both to C<0> will save some memory and CPU.
3779		4043
3780	=item EV_PERIODIC_ENABLE	4044	=item EV_PERIODIC_ENABLE, EV_IDLE_ENABLE, EV_EMBED_ENABLE, EV_STAT_ENABLE,
		4045	EV_PREPARE_ENABLE, EV_CHECK_ENABLE, EV_FORK_ENABLE, EV_SIGNAL_ENABLE,
		4046	EV_ASYNC_ENABLE, EV_CHILD_ENABLE.
3781		4047
3782	If undefined or defined to be C<1>, then periodic timers are supported. If	4048	If undefined or defined to be C<1> (and the platform supports it), then
3783	defined to be C<0>, then they are not. Disabling them saves a few kB of	4049	the respective watcher type is supported. If defined to be C<0>, then it
3784	code.	4050	is not. Disabling watcher types mainly saves code size.
3785		4051
3786	=item EV_IDLE_ENABLE	4052	=item EV_FEATURES
3787
3788	If undefined or defined to be C<1>, then idle watchers are supported. If
3789	defined to be C<0>, then they are not. Disabling them saves a few kB of
3790	code.
3791
3792	=item EV_EMBED_ENABLE
3793
3794	If undefined or defined to be C<1>, then embed watchers are supported. If
3795	defined to be C<0>, then they are not. Embed watchers rely on most other
3796	watcher types, which therefore must not be disabled.
3797
3798	=item EV_STAT_ENABLE
3799
3800	If undefined or defined to be C<1>, then stat watchers are supported. If
3801	defined to be C<0>, then they are not.
3802
3803	=item EV_FORK_ENABLE
3804
3805	If undefined or defined to be C<1>, then fork watchers are supported. If
3806	defined to be C<0>, then they are not.
3807
3808	=item EV_ASYNC_ENABLE
3809
3810	If undefined or defined to be C<1>, then async watchers are supported. If
3811	defined to be C<0>, then they are not.
3812
3813	=item EV_MINIMAL
3814		4053
3815	If you need to shave off some kilobytes of code at the expense of some	4054	If you need to shave off some kilobytes of code at the expense of some
3816	speed (but with the full API), define this symbol to C<1>. Currently this	4055	speed (but with the full API), you can define this symbol to request
3817	is used to override some inlining decisions, saves roughly 30% code size	4056	certain subsets of functionality. The default is to enable all features
3818	on amd64. It also selects a much smaller 2-heap for timer management over	4057	that can be enabled on the platform.
3819	the default 4-heap.
3820		4058
3821	You can save even more by disabling watcher types you do not need	4059	A typical way to use this symbol is to define it to C<0> (or to a bitset
3822	and setting C<EV_MAXPRI> == C<EV_MINPRI>. Also, disabling C<assert>	4060	with some broad features you want) and then selectively re-enable
3823	(C<-DNDEBUG>) will usually reduce code size a lot.	4061	additional parts you want, for example if you want everything minimal,
		4062	but multiple event loop support, async and child watchers and the poll
		4063	backend, use this:
3824		4064
3825	Defining C<EV_MINIMAL> to C<2> will additionally reduce the core API to	4065	#define EV_FEATURES 0
3826	provide a bare-bones event library. See C<ev.h> for details on what parts	4066	#define EV_MULTIPLICITY 1
3827	of the API are still available, and do not complain if this subset changes	4067	#define EV_USE_POLL 1
3828	over time.	4068	#define EV_CHILD_ENABLE 1
		4069	#define EV_ASYNC_ENABLE 1
		4070
		4071	The actual value is a bitset, it can be a combination of the following
		4072	values:
		4073
		4074	=over 4
		4075
		4076	=item C<1> - faster/larger code
		4077
		4078	Use larger code to speed up some operations.
		4079
		4080	Currently this is used to override some inlining decisions (enlarging the
		4081	code size by roughly 30% on amd64).
		4082
		4083	When optimising for size, use of compiler flags such as C<-Os> with
		4084	gcc is recommended, as well as C<-DNDEBUG>, as libev contains a number of
		4085	assertions.
		4086
		4087	=item C<2> - faster/larger data structures
		4088
		4089	Replaces the small 2-heap for timer management by a faster 4-heap, larger
		4090	hash table sizes and so on. This will usually further increase code size
		4091	and can additionally have an effect on the size of data structures at
		4092	runtime.
		4093
		4094	=item C<4> - full API configuration
		4095
		4096	This enables priorities (sets C<EV_MAXPRI>=2 and C<EV_MINPRI>=-2), and
		4097	enables multiplicity (C<EV_MULTIPLICITY>=1).
		4098
		4099	=item C<8> - full API
		4100
		4101	This enables a lot of the "lesser used" API functions. See C<ev.h> for
		4102	details on which parts of the API are still available without this
		4103	feature, and do not complain if this subset changes over time.
		4104
		4105	=item C<16> - enable all optional watcher types
		4106
		4107	Enables all optional watcher types. If you want to selectively enable
		4108	only some watcher types other than I/O and timers (e.g. prepare,
		4109	embed, async, child...) you can enable them manually by defining
		4110	C<EV_watchertype_ENABLE> to C<1> instead.
		4111
		4112	=item C<32> - enable all backends
		4113
		4114	This enables all backends - without this feature, you need to enable at
		4115	least one backend manually (C<EV_USE_SELECT> is a good choice).
		4116
		4117	=item C<64> - enable OS-specific "helper" APIs
		4118
		4119	Enable inotify, eventfd, signalfd and similar OS-specific helper APIs by
		4120	default.
		4121
		4122	=back
		4123
		4124	Compiling with C<gcc -Os -DEV_STANDALONE -DEV_USE_EPOLL=1 -DEV_FEATURES=0>
		4125	reduces the compiled size of libev from 24.7Kb code/2.8Kb data to 6.5Kb
		4126	code/0.3Kb data on my GNU/Linux amd64 system, while still giving you I/O
		4127	watchers, timers and monotonic clock support.
		4128
		4129	With an intelligent-enough linker (gcc+binutils are intelligent enough
		4130	when you use C<-Wl,--gc-sections -ffunction-sections>) functions unused by
		4131	your program might be left out as well - a binary starting a timer and an
		4132	I/O watcher then might come out at only 5Kb.
		4133
		4134	=item EV_AVOID_STDIO
		4135
		4136	If this is set to C<1> at compiletime, then libev will avoid using stdio
		4137	functions (printf, scanf, perror etc.). This will increase the code size
		4138	somewhat, but if your program doesn't otherwise depend on stdio and your
		4139	libc allows it, this avoids linking in the stdio library which is quite
		4140	big.
		4141
		4142	Note that error messages might become less precise when this option is
		4143	enabled.
3829		4144
3830	=item EV_NSIG	4145	=item EV_NSIG
3831		4146
3832	The highest supported signal number, +1 (or, the number of	4147	The highest supported signal number, +1 (or, the number of
3833	signals): Normally, libev tries to deduce the maximum number of signals	4148	signals): Normally, libev tries to deduce the maximum number of signals
3834	automatically, but sometimes this fails, in which case it can be	4149	automatically, but sometimes this fails, in which case it can be
3835	specified. Also, using a lower number than detected (C<32> should be	4150	specified. Also, using a lower number than detected (C<32> should be
3836	good for about any system in existance) can save some memory, as libev	4151	good for about any system in existence) can save some memory, as libev
3837	statically allocates some 12-24 bytes per signal number.	4152	statically allocates some 12-24 bytes per signal number.
3838		4153
3839	=item EV_PID_HASHSIZE	4154	=item EV_PID_HASHSIZE
3840		4155
3841	C<ev_child> watchers use a small hash table to distribute workload by	4156	C<ev_child> watchers use a small hash table to distribute workload by
3842	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	4157	pid. The default size is C<16> (or C<1> with C<EV_FEATURES> disabled),
3843	than enough. If you need to manage thousands of children you might want to	4158	usually more than enough. If you need to manage thousands of children you
3844	increase this value (I<must> be a power of two).	4159	might want to increase this value (I<must> be a power of two).
3845		4160
3846	=item EV_INOTIFY_HASHSIZE	4161	=item EV_INOTIFY_HASHSIZE
3847		4162
3848	C<ev_stat> watchers use a small hash table to distribute workload by	4163	C<ev_stat> watchers use a small hash table to distribute workload by
3849	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	4164	inotify watch id. The default size is C<16> (or C<1> with C<EV_FEATURES>
3850	usually more than enough. If you need to manage thousands of C<ev_stat>	4165	disabled), usually more than enough. If you need to manage thousands of
3851	watchers you might want to increase this value (I<must> be a power of	4166	C<ev_stat> watchers you might want to increase this value (I<must> be a
3852	two).	4167	power of two).
3853		4168
3854	=item EV_USE_4HEAP	4169	=item EV_USE_4HEAP
3855		4170
3856	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4171	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3857	timer and periodics heaps, libev uses a 4-heap when this symbol is defined	4172	timer and periodics heaps, libev uses a 4-heap when this symbol is defined
3858	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably	4173	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably
3859	faster performance with many (thousands) of watchers.	4174	faster performance with many (thousands) of watchers.
3860		4175
3861	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4176	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3862	(disabled).	4177	will be C<0>.
3863		4178
3864	=item EV_HEAP_CACHE_AT	4179	=item EV_HEAP_CACHE_AT
3865		4180
3866	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4181	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3867	timer and periodics heaps, libev can cache the timestamp (I<at>) within	4182	timer and periodics heaps, libev can cache the timestamp (I<at>) within
3868	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),	4183	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
3869	which uses 8-12 bytes more per watcher and a few hundred bytes more code,	4184	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
3870	but avoids random read accesses on heap changes. This improves performance	4185	but avoids random read accesses on heap changes. This improves performance
3871	noticeably with many (hundreds) of watchers.	4186	noticeably with many (hundreds) of watchers.
3872		4187
3873	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4188	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3874	(disabled).	4189	will be C<0>.
3875		4190
3876	=item EV_VERIFY	4191	=item EV_VERIFY
3877		4192
3878	Controls how much internal verification (see C<ev_loop_verify ()>) will	4193	Controls how much internal verification (see C<ev_verify ()>) will
3879	be done: If set to C<0>, no internal verification code will be compiled	4194	be done: If set to C<0>, no internal verification code will be compiled
3880	in. If set to C<1>, then verification code will be compiled in, but not	4195	in. If set to C<1>, then verification code will be compiled in, but not
3881	called. If set to C<2>, then the internal verification code will be	4196	called. If set to C<2>, then the internal verification code will be
3882	called once per loop, which can slow down libev. If set to C<3>, then the	4197	called once per loop, which can slow down libev. If set to C<3>, then the
3883	verification code will be called very frequently, which will slow down	4198	verification code will be called very frequently, which will slow down
3884	libev considerably.	4199	libev considerably.
3885		4200
3886	The default is C<1>, unless C<EV_MINIMAL> is set, in which case it will be	4201	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3887	C<0>.	4202	will be C<0>.
3888		4203
3889	=item EV_COMMON	4204	=item EV_COMMON
3890		4205
3891	By default, all watchers have a C<void *data> member. By redefining	4206	By default, all watchers have a C<void *data> member. By redefining
3892	this macro to a something else you can include more and other types of	4207	this macro to something else you can include more and other types of
3893	members. You have to define it each time you include one of the files,	4208	members. You have to define it each time you include one of the files,
3894	though, and it must be identical each time.	4209	though, and it must be identical each time.
3895		4210
3896	For example, the perl EV module uses something like this:	4211	For example, the perl EV module uses something like this:
3897		4212
…		…
3950	file.	4265	file.
3951		4266
3952	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	4267	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
3953	that everybody includes and which overrides some configure choices:	4268	that everybody includes and which overrides some configure choices:
3954		4269
3955	#define EV_MINIMAL 1	4270	#define EV_FEATURES 8
3956	#define EV_USE_POLL 0	4271	#define EV_USE_SELECT 1
3957	#define EV_MULTIPLICITY 0
3958	#define EV_PERIODIC_ENABLE 0	4272	#define EV_PREPARE_ENABLE 1
		4273	#define EV_IDLE_ENABLE 1
3959	#define EV_STAT_ENABLE 0	4274	#define EV_SIGNAL_ENABLE 1
3960	#define EV_FORK_ENABLE 0	4275	#define EV_CHILD_ENABLE 1
		4276	#define EV_USE_STDEXCEPT 0
3961	#define EV_CONFIG_H <config.h>	4277	#define EV_CONFIG_H <config.h>
3962	#define EV_MINPRI 0
3963	#define EV_MAXPRI 0
3964		4278
3965	#include "ev++.h"	4279	#include "ev++.h"
3966		4280
3967	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	4281	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
3968		4282
…		…
4099	userdata *u = ev_userdata (EV_A);	4413	userdata *u = ev_userdata (EV_A);
4100	pthread_mutex_lock (&u->lock);	4414	pthread_mutex_lock (&u->lock);
4101	}	4415	}
4102		4416
4103	The event loop thread first acquires the mutex, and then jumps straight	4417	The event loop thread first acquires the mutex, and then jumps straight
4104	into C<ev_loop>:	4418	into C<ev_run>:
4105		4419
4106	void *	4420	void *
4107	l_run (void *thr_arg)	4421	l_run (void *thr_arg)
4108	{	4422	{
4109	struct ev_loop *loop = (struct ev_loop *)thr_arg;	4423	struct ev_loop *loop = (struct ev_loop *)thr_arg;
4110		4424
4111	l_acquire (EV_A);	4425	l_acquire (EV_A);
4112	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);	4426	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
4113	ev_loop (EV_A_ 0);	4427	ev_run (EV_A_ 0);
4114	l_release (EV_A);	4428	l_release (EV_A);
4115		4429
4116	return 0;	4430	return 0;
4117	}	4431	}
4118		4432
…		…
4170		4484
4171	=head3 COROUTINES	4485	=head3 COROUTINES
4172		4486
4173	Libev is very accommodating to coroutines ("cooperative threads"):	4487	Libev is very accommodating to coroutines ("cooperative threads"):
4174	libev fully supports nesting calls to its functions from different	4488	libev fully supports nesting calls to its functions from different
4175	coroutines (e.g. you can call C<ev_loop> on the same loop from two	4489	coroutines (e.g. you can call C<ev_run> on the same loop from two
4176	different coroutines, and switch freely between both coroutines running	4490	different coroutines, and switch freely between both coroutines running
4177	the loop, as long as you don't confuse yourself). The only exception is	4491	the loop, as long as you don't confuse yourself). The only exception is
4178	that you must not do this from C<ev_periodic> reschedule callbacks.	4492	that you must not do this from C<ev_periodic> reschedule callbacks.
4179		4493
4180	Care has been taken to ensure that libev does not keep local state inside	4494	Care has been taken to ensure that libev does not keep local state inside
4181	C<ev_loop>, and other calls do not usually allow for coroutine switches as	4495	C<ev_run>, and other calls do not usually allow for coroutine switches as
4182	they do not call any callbacks.	4496	they do not call any callbacks.
4183		4497
4184	=head2 COMPILER WARNINGS	4498	=head2 COMPILER WARNINGS
4185		4499
4186	Depending on your compiler and compiler settings, you might get no or a	4500	Depending on your compiler and compiler settings, you might get no or a
…		…
4197	maintainable.	4511	maintainable.
4198		4512
4199	And of course, some compiler warnings are just plain stupid, or simply	4513	And of course, some compiler warnings are just plain stupid, or simply
4200	wrong (because they don't actually warn about the condition their message	4514	wrong (because they don't actually warn about the condition their message
4201	seems to warn about). For example, certain older gcc versions had some	4515	seems to warn about). For example, certain older gcc versions had some
4202	warnings that resulted an extreme number of false positives. These have	4516	warnings that resulted in an extreme number of false positives. These have
4203	been fixed, but some people still insist on making code warn-free with	4517	been fixed, but some people still insist on making code warn-free with
4204	such buggy versions.	4518	such buggy versions.
4205		4519
4206	While libev is written to generate as few warnings as possible,	4520	While libev is written to generate as few warnings as possible,
4207	"warn-free" code is not a goal, and it is recommended not to build libev	4521	"warn-free" code is not a goal, and it is recommended not to build libev
…		…
4243	I suggest using suppression lists.	4557	I suggest using suppression lists.
4244		4558
4245		4559
4246	=head1 PORTABILITY NOTES	4560	=head1 PORTABILITY NOTES
4247		4561
		4562	=head2 GNU/LINUX 32 BIT LIMITATIONS
		4563
		4564	GNU/Linux is the only common platform that supports 64 bit file/large file
		4565	interfaces but I<disables> them by default.
		4566
		4567	That means that libev compiled in the default environment doesn't support
		4568	files larger than 2GiB or so, which mainly affects C<ev_stat> watchers.
		4569
		4570	Unfortunately, many programs try to work around this GNU/Linux issue
		4571	by enabling the large file API, which makes them incompatible with the
		4572	standard libev compiled for their system.
		4573
		4574	Likewise, libev cannot enable the large file API itself as this would
		4575	suddenly make it incompatible to the default compile time environment,
		4576	i.e. all programs not using special compile switches.
		4577
		4578	=head2 OS/X AND DARWIN BUGS
		4579
		4580	The whole thing is a bug if you ask me - basically any system interface
		4581	you touch is broken, whether it is locales, poll, kqueue or even the
		4582	OpenGL drivers.
		4583
		4584	=head3 C<kqueue> is buggy
		4585
		4586	The kqueue syscall is broken in all known versions - most versions support
		4587	only sockets, many support pipes.
		4588
		4589	Libev tries to work around this by not using C<kqueue> by default on this
		4590	rotten platform, but of course you can still ask for it when creating a
		4591	loop - embedding a socket-only kqueue loop into a select-based one is
		4592	probably going to work well.
		4593
		4594	=head3 C<poll> is buggy
		4595
		4596	Instead of fixing C<kqueue>, Apple replaced their (working) C<poll>
		4597	implementation by something calling C<kqueue> internally around the 10.5.6
		4598	release, so now C<kqueue> I<and> C<poll> are broken.
		4599
		4600	Libev tries to work around this by not using C<poll> by default on
		4601	this rotten platform, but of course you can still ask for it when creating
		4602	a loop.
		4603
		4604	=head3 C<select> is buggy
		4605
		4606	All that's left is C<select>, and of course Apple found a way to fuck this
		4607	one up as well: On OS/X, C<select> actively limits the number of file
		4608	descriptors you can pass in to 1024 - your program suddenly crashes when
		4609	you use more.
		4610
		4611	There is an undocumented "workaround" for this - defining
		4612	C<_DARWIN_UNLIMITED_SELECT>, which libev tries to use, so select I<should>
		4613	work on OS/X.
		4614
		4615	=head2 SOLARIS PROBLEMS AND WORKAROUNDS
		4616
		4617	=head3 C<errno> reentrancy
		4618
		4619	The default compile environment on Solaris is unfortunately so
		4620	thread-unsafe that you can't even use components/libraries compiled
		4621	without C<-D_REENTRANT> in a threaded program, which, of course, isn't
		4622	defined by default. A valid, if stupid, implementation choice.
		4623
		4624	If you want to use libev in threaded environments you have to make sure
		4625	it's compiled with C<_REENTRANT> defined.
		4626
		4627	=head3 Event port backend
		4628
		4629	The scalable event interface for Solaris is called "event
		4630	ports". Unfortunately, this mechanism is very buggy in all major
		4631	releases. If you run into high CPU usage, your program freezes or you get
		4632	a large number of spurious wakeups, make sure you have all the relevant
		4633	and latest kernel patches applied. No, I don't know which ones, but there
		4634	are multiple ones to apply, and afterwards, event ports actually work
		4635	great.
		4636
		4637	If you can't get it to work, you can try running the program by setting
		4638	the environment variable C<LIBEV_FLAGS=3> to only allow C<poll> and
		4639	C<select> backends.
		4640
		4641	=head2 AIX POLL BUG
		4642
		4643	AIX unfortunately has a broken C<poll.h> header. Libev works around
		4644	this by trying to avoid the poll backend altogether (i.e. it's not even
		4645	compiled in), which normally isn't a big problem as C<select> works fine
		4646	with large bitsets on AIX, and AIX is dead anyway.
		4647
4248	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS	4648	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
		4649
		4650	=head3 General issues
4249		4651
4250	Win32 doesn't support any of the standards (e.g. POSIX) that libev	4652	Win32 doesn't support any of the standards (e.g. POSIX) that libev
4251	requires, and its I/O model is fundamentally incompatible with the POSIX	4653	requires, and its I/O model is fundamentally incompatible with the POSIX
4252	model. Libev still offers limited functionality on this platform in	4654	model. Libev still offers limited functionality on this platform in
4253	the form of the C<EVBACKEND_SELECT> backend, and only supports socket	4655	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
4254	descriptors. This only applies when using Win32 natively, not when using	4656	descriptors. This only applies when using Win32 natively, not when using
4255	e.g. cygwin.	4657	e.g. cygwin. Actually, it only applies to the microsofts own compilers,
		4658	as every compielr comes with a slightly differently broken/incompatible
		4659	environment.
4256		4660
4257	Lifting these limitations would basically require the full	4661	Lifting these limitations would basically require the full
4258	re-implementation of the I/O system. If you are into these kinds of	4662	re-implementation of the I/O system. If you are into this kind of thing,
4259	things, then note that glib does exactly that for you in a very portable	4663	then note that glib does exactly that for you in a very portable way (note
4260	way (note also that glib is the slowest event library known to man).	4664	also that glib is the slowest event library known to man).
4261		4665
4262	There is no supported compilation method available on windows except	4666	There is no supported compilation method available on windows except
4263	embedding it into other applications.	4667	embedding it into other applications.
4264		4668
4265	Sensible signal handling is officially unsupported by Microsoft - libev	4669	Sensible signal handling is officially unsupported by Microsoft - libev
…		…
4293	you do I<not> compile the F<ev.c> or any other embedded source files!):	4697	you do I<not> compile the F<ev.c> or any other embedded source files!):
4294		4698
4295	#include "evwrap.h"	4699	#include "evwrap.h"
4296	#include "ev.c"	4700	#include "ev.c"
4297		4701
4298	=over 4
4299
4300	=item The winsocket select function	4702	=head3 The winsocket C<select> function
4301		4703
4302	The winsocket C<select> function doesn't follow POSIX in that it	4704	The winsocket C<select> function doesn't follow POSIX in that it
4303	requires socket I<handles> and not socket I<file descriptors> (it is	4705	requires socket I<handles> and not socket I<file descriptors> (it is
4304	also extremely buggy). This makes select very inefficient, and also	4706	also extremely buggy). This makes select very inefficient, and also
4305	requires a mapping from file descriptors to socket handles (the Microsoft	4707	requires a mapping from file descriptors to socket handles (the Microsoft
…		…
4314	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */	4716	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
4315		4717
4316	Note that winsockets handling of fd sets is O(n), so you can easily get a	4718	Note that winsockets handling of fd sets is O(n), so you can easily get a
4317	complexity in the O(n²) range when using win32.	4719	complexity in the O(n²) range when using win32.
4318		4720
4319	=item Limited number of file descriptors	4721	=head3 Limited number of file descriptors
4320		4722
4321	Windows has numerous arbitrary (and low) limits on things.	4723	Windows has numerous arbitrary (and low) limits on things.
4322		4724
4323	Early versions of winsocket's select only supported waiting for a maximum	4725	Early versions of winsocket's select only supported waiting for a maximum
4324	of C<64> handles (probably owning to the fact that all windows kernels	4726	of C<64> handles (probably owning to the fact that all windows kernels
…		…
4339	runtime libraries. This might get you to about C<512> or C<2048> sockets	4741	runtime libraries. This might get you to about C<512> or C<2048> sockets
4340	(depending on windows version and/or the phase of the moon). To get more,	4742	(depending on windows version and/or the phase of the moon). To get more,
4341	you need to wrap all I/O functions and provide your own fd management, but	4743	you need to wrap all I/O functions and provide your own fd management, but
4342	the cost of calling select (O(n²)) will likely make this unworkable.	4744	the cost of calling select (O(n²)) will likely make this unworkable.
4343		4745
4344	=back
4345
4346	=head2 PORTABILITY REQUIREMENTS	4746	=head2 PORTABILITY REQUIREMENTS
4347		4747
4348	In addition to a working ISO-C implementation and of course the	4748	In addition to a working ISO-C implementation and of course the
4349	backend-specific APIs, libev relies on a few additional extensions:	4749	backend-specific APIs, libev relies on a few additional extensions:
4350		4750
…		…
4388	watchers.	4788	watchers.
4389		4789
4390	=item C<double> must hold a time value in seconds with enough accuracy	4790	=item C<double> must hold a time value in seconds with enough accuracy
4391		4791
4392	The type C<double> is used to represent timestamps. It is required to	4792	The type C<double> is used to represent timestamps. It is required to
4393	have at least 51 bits of mantissa (and 9 bits of exponent), which is good	4793	have at least 51 bits of mantissa (and 9 bits of exponent), which is
4394	enough for at least into the year 4000. This requirement is fulfilled by	4794	good enough for at least into the year 4000 with millisecond accuracy
		4795	(the design goal for libev). This requirement is overfulfilled by
4395	implementations implementing IEEE 754, which is basically all existing	4796	implementations using IEEE 754, which is basically all existing ones. With
4396	ones. With IEEE 754 doubles, you get microsecond accuracy until at least	4797	IEEE 754 doubles, you get microsecond accuracy until at least 2200.
4397	2200.
4398		4798
4399	=back	4799	=back
4400		4800
4401	If you know of other additional requirements drop me a note.	4801	If you know of other additional requirements drop me a note.
4402		4802
…		…
4470	involves iterating over all running async watchers or all signal numbers.	4870	involves iterating over all running async watchers or all signal numbers.
4471		4871
4472	=back	4872	=back
4473		4873
4474		4874
		4875	=head1 PORTING FROM LIBEV 3.X TO 4.X
		4876
		4877	The major version 4 introduced some minor incompatible changes to the API.
		4878
		4879	At the moment, the C<ev.h> header file tries to implement superficial
		4880	compatibility, so most programs should still compile. Those might be
		4881	removed in later versions of libev, so better update early than late.
		4882
		4883	=over 4
		4884
		4885	=item C<ev_default_destroy> and C<ev_default_fork> have been removed
		4886
		4887	These calls can be replaced easily by their C<ev_loop_xxx> counterparts:
		4888
		4889	ev_loop_destroy (EV_DEFAULT_UC);
		4890	ev_loop_fork (EV_DEFAULT);
		4891
		4892	=item function/symbol renames
		4893
		4894	A number of functions and symbols have been renamed:
		4895
		4896	ev_loop => ev_run
		4897	EVLOOP_NONBLOCK => EVRUN_NOWAIT
		4898	EVLOOP_ONESHOT => EVRUN_ONCE
		4899
		4900	ev_unloop => ev_break
		4901	EVUNLOOP_CANCEL => EVBREAK_CANCEL
		4902	EVUNLOOP_ONE => EVBREAK_ONE
		4903	EVUNLOOP_ALL => EVBREAK_ALL
		4904
		4905	EV_TIMEOUT => EV_TIMER
		4906
		4907	ev_loop_count => ev_iteration
		4908	ev_loop_depth => ev_depth
		4909	ev_loop_verify => ev_verify
		4910
		4911	Most functions working on C<struct ev_loop> objects don't have an
		4912	C<ev_loop_> prefix, so it was removed; C<ev_loop>, C<ev_unloop> and
		4913	associated constants have been renamed to not collide with the C<struct
		4914	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme
		4915	as all other watcher types. Note that C<ev_loop_fork> is still called
		4916	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>
		4917	typedef.
		4918
		4919	=item C<EV_COMPAT3> backwards compatibility mechanism
		4920
		4921	The backward compatibility mechanism can be controlled by
		4922	C<EV_COMPAT3>. See L<PREPROCESSOR SYMBOLS/MACROS> in the L<EMBEDDING>
		4923	section.
		4924
		4925	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>
		4926
		4927	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different
		4928	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile
		4929	and work, but the library code will of course be larger.
		4930
		4931	=back
		4932
		4933
4475	=head1 GLOSSARY	4934	=head1 GLOSSARY
4476		4935
4477	=over 4	4936	=over 4
4478		4937
4479	=item active	4938	=item active
4480		4939
4481	A watcher is active as long as it has been started (has been attached to	4940	A watcher is active as long as it has been started and not yet stopped.
4482	an event loop) but not yet stopped (disassociated from the event loop).	4941	See L<WATCHER STATES> for details.
4483		4942
4484	=item application	4943	=item application
4485		4944
4486	In this document, an application is whatever is using libev.	4945	In this document, an application is whatever is using libev.
		4946
		4947	=item backend
		4948
		4949	The part of the code dealing with the operating system interfaces.
4487		4950
4488	=item callback	4951	=item callback
4489		4952
4490	The address of a function that is called when some event has been	4953	The address of a function that is called when some event has been
4491	detected. Callbacks are being passed the event loop, the watcher that	4954	detected. Callbacks are being passed the event loop, the watcher that
4492	received the event, and the actual event bitset.	4955	received the event, and the actual event bitset.
4493		4956
4494	=item callback invocation	4957	=item callback/watcher invocation
4495		4958
4496	The act of calling the callback associated with a watcher.	4959	The act of calling the callback associated with a watcher.
4497		4960
4498	=item event	4961	=item event
4499		4962
4500	A change of state of some external event, such as data now being available	4963	A change of state of some external event, such as data now being available
4501	for reading on a file descriptor, time having passed or simply not having	4964	for reading on a file descriptor, time having passed or simply not having
4502	any other events happening anymore.	4965	any other events happening anymore.
4503		4966
4504	In libev, events are represented as single bits (such as C<EV_READ> or	4967	In libev, events are represented as single bits (such as C<EV_READ> or
4505	C<EV_TIMEOUT>).	4968	C<EV_TIMER>).
4506		4969
4507	=item event library	4970	=item event library
4508		4971
4509	A software package implementing an event model and loop.	4972	A software package implementing an event model and loop.
4510		4973
…		…
4518	The model used to describe how an event loop handles and processes	4981	The model used to describe how an event loop handles and processes
4519	watchers and events.	4982	watchers and events.
4520		4983
4521	=item pending	4984	=item pending
4522		4985
4523	A watcher is pending as soon as the corresponding event has been detected,	4986	A watcher is pending as soon as the corresponding event has been
4524	and stops being pending as soon as the watcher will be invoked or its	4987	detected. See L<WATCHER STATES> for details.
4525	pending status is explicitly cleared by the application.
4526
4527	A watcher can be pending, but not active. Stopping a watcher also clears
4528	its pending status.
4529		4988
4530	=item real time	4989	=item real time
4531		4990
4532	The physical time that is observed. It is apparently strictly monotonic :)	4991	The physical time that is observed. It is apparently strictly monotonic :)
4533		4992
…		…
4540	=item watcher	4999	=item watcher
4541		5000
4542	A data structure that describes interest in certain events. Watchers need	5001	A data structure that describes interest in certain events. Watchers need
4543	to be started (attached to an event loop) before they can receive events.	5002	to be started (attached to an event loop) before they can receive events.
4544		5003
4545	=item watcher invocation
4546
4547	The act of calling the callback associated with a watcher.
4548
4549	=back	5004	=back
4550		5005
4551	=head1 AUTHOR	5006	=head1 AUTHOR
4552		5007
4553	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael Magnusson.	5008	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael Magnusson.

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines