ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.235 by root, Thu Apr 16 07:50:39 2009 UTC vs.
Revision 1.337 by root, Sun Oct 31 20:20:20 2010 UTC

…		…
26	puts ("stdin ready");	26	puts ("stdin ready");
27	// for one-shot events, one must manually stop the watcher	27	// for one-shot events, one must manually stop the watcher
28	// with its corresponding stop function.	28	// with its corresponding stop function.
29	ev_io_stop (EV_A_ w);	29	ev_io_stop (EV_A_ w);
30		30
31	// this causes all nested ev_loop's to stop iterating	31	// this causes all nested ev_run's to stop iterating
32	ev_unloop (EV_A_ EVUNLOOP_ALL);	32	ev_break (EV_A_ EVBREAK_ALL);
33	}	33	}
34		34
35	// another callback, this time for a time-out	35	// another callback, this time for a time-out
36	static void	36	static void
37	timeout_cb (EV_P_ ev_timer *w, int revents)	37	timeout_cb (EV_P_ ev_timer *w, int revents)
38	{	38	{
39	puts ("timeout");	39	puts ("timeout");
40	// this causes the innermost ev_loop to stop iterating	40	// this causes the innermost ev_run to stop iterating
41	ev_unloop (EV_A_ EVUNLOOP_ONE);	41	ev_break (EV_A_ EVBREAK_ONE);
42	}	42	}
43		43
44	int	44	int
45	main (void)	45	main (void)
46	{	46	{
47	// use the default event loop unless you have special needs	47	// use the default event loop unless you have special needs
48	struct ev_loop *loop = ev_default_loop (0);	48	struct ev_loop *loop = EV_DEFAULT;
49		49
50	// initialise an io watcher, then start it	50	// initialise an io watcher, then start it
51	// this one will watch for stdin to become readable	51	// this one will watch for stdin to become readable
52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
53	ev_io_start (loop, &stdin_watcher);	53	ev_io_start (loop, &stdin_watcher);
…		…
56	// simple non-repeating 5.5 second timeout	56	// simple non-repeating 5.5 second timeout
57	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	57	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
58	ev_timer_start (loop, &timeout_watcher);	58	ev_timer_start (loop, &timeout_watcher);
59		59
60	// now wait for events to arrive	60	// now wait for events to arrive
61	ev_loop (loop, 0);	61	ev_run (loop, 0);
62		62
63	// unloop was called, so exit	63	// unloop was called, so exit
64	return 0;	64	return 0;
65	}	65	}
66		66
67	=head1 DESCRIPTION	67	=head1 ABOUT THIS DOCUMENT
		68
		69	This document documents the libev software package.
68		70
69	The newest version of this document is also available as an html-formatted	71	The newest version of this document is also available as an html-formatted
70	web page you might find easier to navigate when reading it for the first	72	web page you might find easier to navigate when reading it for the first
71	time: L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.	73	time: L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.
		74
		75	While this document tries to be as complete as possible in documenting
		76	libev, its usage and the rationale behind its design, it is not a tutorial
		77	on event-based programming, nor will it introduce event-based programming
		78	with libev.
		79
		80	Familiarity with event based programming techniques in general is assumed
		81	throughout this document.
		82
		83	=head1 WHAT TO READ WHEN IN A HURRY
		84
		85	This manual tries to be very detailed, but unfortunately, this also makes
		86	it very long. If you just want to know the basics of libev, I suggest
		87	reading L<ANATOMY OF A WATCHER>, then the L<EXAMPLE PROGRAM> above and
		88	look up the missing functions in L<GLOBAL FUNCTIONS> and the C<ev_io> and
		89	C<ev_timer> sections in L<WATCHER TYPES>.
		90
		91	=head1 ABOUT LIBEV
72		92
73	Libev is an event loop: you register interest in certain events (such as a	93	Libev is an event loop: you register interest in certain events (such as a
74	file descriptor being readable or a timeout occurring), and it will manage	94	file descriptor being readable or a timeout occurring), and it will manage
75	these event sources and provide your program with events.	95	these event sources and provide your program with events.
76		96
…		…
86	=head2 FEATURES	106	=head2 FEATURES
87		107
88	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	108	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
89	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	109	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
90	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	110	for file descriptor events (C<ev_io>), the Linux C<inotify> interface
91	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers	111	(for C<ev_stat>), Linux eventfd/signalfd (for faster and cleaner
92	with customised rescheduling (C<ev_periodic>), synchronous signals	112	inter-thread wakeup (C<ev_async>)/signal handling (C<ev_signal>)) relative
93	(C<ev_signal>), process status change events (C<ev_child>), and event	113	timers (C<ev_timer>), absolute timers with customised rescheduling
94	watchers dealing with the event loop mechanism itself (C<ev_idle>,	114	(C<ev_periodic>), synchronous signals (C<ev_signal>), process status
95	C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as	115	change events (C<ev_child>), and event watchers dealing with the event
96	file watchers (C<ev_stat>) and even limited support for fork events	116	loop mechanism itself (C<ev_idle>, C<ev_embed>, C<ev_prepare> and
97	(C<ev_fork>).	117	C<ev_check> watchers) as well as file watchers (C<ev_stat>) and even
		118	limited support for fork events (C<ev_fork>).
98		119
99	It also is quite fast (see this	120	It also is quite fast (see this
100	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent	121	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
101	for example).	122	for example).
102		123
…		…
105	Libev is very configurable. In this manual the default (and most common)	126	Libev is very configurable. In this manual the default (and most common)
106	configuration will be described, which supports multiple event loops. For	127	configuration will be described, which supports multiple event loops. For
107	more info about various configuration options please have a look at	128	more info about various configuration options please have a look at
108	B<EMBED> section in this manual. If libev was configured without support	129	B<EMBED> section in this manual. If libev was configured without support
109	for multiple event loops, then all functions taking an initial argument of	130	for multiple event loops, then all functions taking an initial argument of
110	name C<loop> (which is always of type C<ev_loop *>) will not have	131	name C<loop> (which is always of type C<struct ev_loop *>) will not have
111	this argument.	132	this argument.
112		133
113	=head2 TIME REPRESENTATION	134	=head2 TIME REPRESENTATION
114		135
115	Libev represents time as a single floating point number, representing the	136	Libev represents time as a single floating point number, representing
116	(fractional) number of seconds since the (POSIX) epoch (somewhere near	137	the (fractional) number of seconds since the (POSIX) epoch (in practice
117	the beginning of 1970, details are complicated, don't ask). This type is	138	somewhere near the beginning of 1970, details are complicated, don't
118	called C<ev_tstamp>, which is what you should use too. It usually aliases	139	ask). This type is called C<ev_tstamp>, which is what you should use
119	to the C<double> type in C, and when you need to do any calculations on	140	too. It usually aliases to the C<double> type in C. When you need to do
120	it, you should treat it as some floating point value. Unlike the name	141	any calculations on it, you should treat it as some floating point value.
		142
121	component C<stamp> might indicate, it is also used for time differences	143	Unlike the name component C<stamp> might indicate, it is also used for
122	throughout libev.	144	time differences (e.g. delays) throughout libev.
123		145
124	=head1 ERROR HANDLING	146	=head1 ERROR HANDLING
125		147
126	Libev knows three classes of errors: operating system errors, usage errors	148	Libev knows three classes of errors: operating system errors, usage errors
127	and internal errors (bugs).	149	and internal errors (bugs).
…		…
151		173
152	=item ev_tstamp ev_time ()	174	=item ev_tstamp ev_time ()
153		175
154	Returns the current time as libev would use it. Please note that the	176	Returns the current time as libev would use it. Please note that the
155	C<ev_now> function is usually faster and also often returns the timestamp	177	C<ev_now> function is usually faster and also often returns the timestamp
156	you actually want to know.	178	you actually want to know. Also interesting is the combination of
		179	C<ev_update_now> and C<ev_now>.
157		180
158	=item ev_sleep (ev_tstamp interval)	181	=item ev_sleep (ev_tstamp interval)
159		182
160	Sleep for the given interval: The current thread will be blocked until	183	Sleep for the given interval: The current thread will be blocked until
161	either it is interrupted or the given time interval has passed. Basically	184	either it is interrupted or the given time interval has passed. Basically
…		…
178	as this indicates an incompatible change. Minor versions are usually	201	as this indicates an incompatible change. Minor versions are usually
179	compatible to older versions, so a larger minor version alone is usually	202	compatible to older versions, so a larger minor version alone is usually
180	not a problem.	203	not a problem.
181		204
182	Example: Make sure we haven't accidentally been linked against the wrong	205	Example: Make sure we haven't accidentally been linked against the wrong
183	version.	206	version (note, however, that this will not detect other ABI mismatches,
		207	such as LFS or reentrancy).
184		208
185	assert (("libev version mismatch",	209	assert (("libev version mismatch",
186	ev_version_major () == EV_VERSION_MAJOR	210	ev_version_major () == EV_VERSION_MAJOR
187	&& ev_version_minor () >= EV_VERSION_MINOR));	211	&& ev_version_minor () >= EV_VERSION_MINOR));
188		212
…		…
199	assert (("sorry, no epoll, no sex",	223	assert (("sorry, no epoll, no sex",
200	ev_supported_backends () & EVBACKEND_EPOLL));	224	ev_supported_backends () & EVBACKEND_EPOLL));
201		225
202	=item unsigned int ev_recommended_backends ()	226	=item unsigned int ev_recommended_backends ()
203		227
204	Return the set of all backends compiled into this binary of libev and also	228	Return the set of all backends compiled into this binary of libev and
205	recommended for this platform. This set is often smaller than the one	229	also recommended for this platform, meaning it will work for most file
		230	descriptor types. This set is often smaller than the one returned by
206	returned by C<ev_supported_backends>, as for example kqueue is broken on	231	C<ev_supported_backends>, as for example kqueue is broken on most BSDs
207	most BSDs and will not be auto-detected unless you explicitly request it	232	and will not be auto-detected unless you explicitly request it (assuming
208	(assuming you know what you are doing). This is the set of backends that	233	you know what you are doing). This is the set of backends that libev will
209	libev will probe for if you specify no backends explicitly.	234	probe for if you specify no backends explicitly.
210		235
211	=item unsigned int ev_embeddable_backends ()	236	=item unsigned int ev_embeddable_backends ()
212		237
213	Returns the set of backends that are embeddable in other event loops. This	238	Returns the set of backends that are embeddable in other event loops. This
214	is the theoretical, all-platform, value. To find which backends	239	value is platform-specific but can include backends not available on the
215	might be supported on the current system, you would need to look at	240	current system. To find which embeddable backends might be supported on
216	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for	241	the current system, you would need to look at C<ev_embeddable_backends ()
217	recommended ones.	242	& ev_supported_backends ()>, likewise for recommended ones.
218		243
219	See the description of C<ev_embed> watchers for more info.	244	See the description of C<ev_embed> watchers for more info.
220		245
221	=item ev_set_allocator (void *(*cb)(void *ptr, long size)) [NOT REENTRANT]	246	=item ev_set_allocator (void *(*cb)(void *ptr, long size)) [NOT REENTRANT]
222		247
…		…
276	...	301	...
277	ev_set_syserr_cb (fatal_error);	302	ev_set_syserr_cb (fatal_error);
278		303
279	=back	304	=back
280		305
281	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	306	=head1 FUNCTIONS CONTROLLING EVENT LOOPS
282		307
283	An event loop is described by a C<struct ev_loop *> (the C<struct>	308	An event loop is described by a C<struct ev_loop *> (the C<struct> is
284	is I<not> optional in this case, as there is also an C<ev_loop>	309	I<not> optional in this case unless libev 3 compatibility is disabled, as
285	I<function>).	310	libev 3 had an C<ev_loop> function colliding with the struct name).
286		311
287	The library knows two types of such loops, the I<default> loop, which	312	The library knows two types of such loops, the I<default> loop, which
288	supports signals and child events, and dynamically created loops which do	313	supports child process events, and dynamically created event loops which
289	not.	314	do not.
290		315
291	=over 4	316	=over 4
292		317
293	=item struct ev_loop *ev_default_loop (unsigned int flags)	318	=item struct ev_loop *ev_default_loop (unsigned int flags)
294		319
295	This will initialise the default event loop if it hasn't been initialised	320	This returns the "default" event loop object, which is what you should
296	yet and return it. If the default loop could not be initialised, returns	321	normally use when you just need "the event loop". Event loop objects and
297	false. If it already was initialised it simply returns it (and ignores the	322	the C<flags> parameter are described in more detail in the entry for
298	flags. If that is troubling you, check C<ev_backend ()> afterwards).	323	C<ev_loop_new>.
		324
		325	If the default loop is already initialised then this function simply
		326	returns it (and ignores the flags. If that is troubling you, check
		327	C<ev_backend ()> afterwards). Otherwise it will create it with the given
		328	flags, which should almost always be C<0>, unless the caller is also the
		329	one calling C<ev_run> or otherwise qualifies as "the main program".
299		330
300	If you don't know what event loop to use, use the one returned from this	331	If you don't know what event loop to use, use the one returned from this
301	function.	332	function (or via the C<EV_DEFAULT> macro).
302		333
303	Note that this function is I<not> thread-safe, so if you want to use it	334	Note that this function is I<not> thread-safe, so if you want to use it
304	from multiple threads, you have to lock (note also that this is unlikely,	335	from multiple threads, you have to employ some kind of mutex (note also
305	as loops cannot be shared easily between threads anyway).	336	that this case is unlikely, as loops cannot be shared easily between
		337	threads anyway).
306		338
307	The default loop is the only loop that can handle C<ev_signal> and	339	The default loop is the only loop that can handle C<ev_child> watchers,
308	C<ev_child> watchers, and to do this, it always registers a handler	340	and to do this, it always registers a handler for C<SIGCHLD>. If this is
309	for C<SIGCHLD>. If this is a problem for your application you can either	341	a problem for your application you can either create a dynamic loop with
310	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you	342	C<ev_loop_new> which doesn't do that, or you can simply overwrite the
311	can simply overwrite the C<SIGCHLD> signal handler I<after> calling	343	C<SIGCHLD> signal handler I<after> calling C<ev_default_init>.
312	C<ev_default_init>.	344
		345	Example: This is the most typical usage.
		346
		347	if (!ev_default_loop (0))
		348	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		349
		350	Example: Restrict libev to the select and poll backends, and do not allow
		351	environment settings to be taken into account:
		352
		353	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
		354
		355	=item struct ev_loop *ev_loop_new (unsigned int flags)
		356
		357	This will create and initialise a new event loop object. If the loop
		358	could not be initialised, returns false.
		359
		360	Note that this function I<is> thread-safe, and one common way to use
		361	libev with threads is indeed to create one loop per thread, and using the
		362	default loop in the "main" or "initial" thread.
313		363
314	The flags argument can be used to specify special behaviour or specific	364	The flags argument can be used to specify special behaviour or specific
315	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	365	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
316		366
317	The following flags are supported:	367	The following flags are supported:
…		…
332	useful to try out specific backends to test their performance, or to work	382	useful to try out specific backends to test their performance, or to work
333	around bugs.	383	around bugs.
334		384
335	=item C<EVFLAG_FORKCHECK>	385	=item C<EVFLAG_FORKCHECK>
336		386
337	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after	387	Instead of calling C<ev_loop_fork> manually after a fork, you can also
338	a fork, you can also make libev check for a fork in each iteration by	388	make libev check for a fork in each iteration by enabling this flag.
339	enabling this flag.
340		389
341	This works by calling C<getpid ()> on every iteration of the loop,	390	This works by calling C<getpid ()> on every iteration of the loop,
342	and thus this might slow down your event loop if you do a lot of loop	391	and thus this might slow down your event loop if you do a lot of loop
343	iterations and little real work, but is usually not noticeable (on my	392	iterations and little real work, but is usually not noticeable (on my
344	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence	393	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence
…		…
350	flag.	399	flag.
351		400
352	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>	401	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>
353	environment variable.	402	environment variable.
354		403
		404	=item C<EVFLAG_NOINOTIFY>
		405
		406	When this flag is specified, then libev will not attempt to use the
		407	I<inotify> API for it's C<ev_stat> watchers. Apart from debugging and
		408	testing, this flag can be useful to conserve inotify file descriptors, as
		409	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.
		410
		411	=item C<EVFLAG_SIGNALFD>
		412
		413	When this flag is specified, then libev will attempt to use the
		414	I<signalfd> API for it's C<ev_signal> (and C<ev_child>) watchers. This API
		415	delivers signals synchronously, which makes it both faster and might make
		416	it possible to get the queued signal data. It can also simplify signal
		417	handling with threads, as long as you properly block signals in your
		418	threads that are not interested in handling them.
		419
		420	Signalfd will not be used by default as this changes your signal mask, and
		421	there are a lot of shoddy libraries and programs (glib's threadpool for
		422	example) that can't properly initialise their signal masks.
		423
355	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	424	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
356		425
357	This is your standard select(2) backend. Not I<completely> standard, as	426	This is your standard select(2) backend. Not I<completely> standard, as
358	libev tries to roll its own fd_set with no limits on the number of fds,	427	libev tries to roll its own fd_set with no limits on the number of fds,
359	but if that fails, expect a fairly low limit on the number of fds when	428	but if that fails, expect a fairly low limit on the number of fds when
…		…
383	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and	452	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and
384	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.	453	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.
385		454
386	=item C<EVBACKEND_EPOLL> (value 4, Linux)	455	=item C<EVBACKEND_EPOLL> (value 4, Linux)
387		456
		457	Use the linux-specific epoll(7) interface (for both pre- and post-2.6.9
		458	kernels).
		459
388	For few fds, this backend is a bit little slower than poll and select,	460	For few fds, this backend is a bit little slower than poll and select,
389	but it scales phenomenally better. While poll and select usually scale	461	but it scales phenomenally better. While poll and select usually scale
390	like O(total_fds) where n is the total number of fds (or the highest fd),	462	like O(total_fds) where n is the total number of fds (or the highest fd),
391	epoll scales either O(1) or O(active_fds).	463	epoll scales either O(1) or O(active_fds).
392		464
393	The epoll mechanism deserves honorable mention as the most misdesigned	465	The epoll mechanism deserves honorable mention as the most misdesigned
394	of the more advanced event mechanisms: mere annoyances include silently	466	of the more advanced event mechanisms: mere annoyances include silently
395	dropping file descriptors, requiring a system call per change per file	467	dropping file descriptors, requiring a system call per change per file
396	descriptor (and unnecessary guessing of parameters), problems with dup and	468	descriptor (and unnecessary guessing of parameters), problems with dup,
		469	returning before the timeout value requiring additional iterations and so
397	so on. The biggest issue is fork races, however - if a program forks then	470	on. The biggest issue is fork races, however - if a program forks then
398	I<both> parent and child process have to recreate the epoll set, which can	471	I<both> parent and child process have to recreate the epoll set, which can
399	take considerable time (one syscall per file descriptor) and is of course	472	take considerable time (one syscall per file descriptor) and is of course
400	hard to detect.	473	hard to detect.
401		474
402	Epoll is also notoriously buggy - embedding epoll fds I<should> work, but	475	Epoll is also notoriously buggy - embedding epoll fds I<should> work, but
403	of course I<doesn't>, and epoll just loves to report events for totally	476	of course I<doesn't>, and epoll just loves to report events for totally
404	I<different> file descriptors (even already closed ones, so one cannot	477	I<different> file descriptors (even already closed ones, so one cannot
405	even remove them from the set) than registered in the set (especially	478	even remove them from the set) than registered in the set (especially
406	on SMP systems). Libev tries to counter these spurious notifications by	479	on SMP systems). Libev tries to counter these spurious notifications by
407	employing an additional generation counter and comparing that against the	480	employing an additional generation counter and comparing that against the
408	events to filter out spurious ones, recreating the set when required.	481	events to filter out spurious ones, recreating the set when required. Last
		482	not least, it also refuses to work with some file descriptors which work
		483	perfectly fine with C<select> (files, many character devices...).
409		484
410	While stopping, setting and starting an I/O watcher in the same iteration	485	While stopping, setting and starting an I/O watcher in the same iteration
411	will result in some caching, there is still a system call per such	486	will result in some caching, there is still a system call per such
412	incident (because the same I<file descriptor> could point to a different	487	incident (because the same I<file descriptor> could point to a different
413	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed	488	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed
…		…
506		581
507	It is definitely not recommended to use this flag.	582	It is definitely not recommended to use this flag.
508		583
509	=back	584	=back
510		585
511	If one or more of these are or'ed into the flags value, then only these	586	If one or more of the backend flags are or'ed into the flags value,
512	backends will be tried (in the reverse order as listed here). If none are	587	then only these backends will be tried (in the reverse order as listed
513	specified, all backends in C<ev_recommended_backends ()> will be tried.	588	here). If none are specified, all backends in C<ev_recommended_backends
514		589	()> will be tried.
515	Example: This is the most typical usage.
516
517	if (!ev_default_loop (0))
518	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
519
520	Example: Restrict libev to the select and poll backends, and do not allow
521	environment settings to be taken into account:
522
523	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
524
525	Example: Use whatever libev has to offer, but make sure that kqueue is
526	used if available (warning, breaks stuff, best use only with your own
527	private event loop and only if you know the OS supports your types of
528	fds):
529
530	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
531
532	=item struct ev_loop *ev_loop_new (unsigned int flags)
533
534	Similar to C<ev_default_loop>, but always creates a new event loop that is
535	always distinct from the default loop. Unlike the default loop, it cannot
536	handle signal and child watchers, and attempts to do so will be greeted by
537	undefined behaviour (or a failed assertion if assertions are enabled).
538
539	Note that this function I<is> thread-safe, and the recommended way to use
540	libev with threads is indeed to create one loop per thread, and using the
541	default loop in the "main" or "initial" thread.
542		590
543	Example: Try to create a event loop that uses epoll and nothing else.	591	Example: Try to create a event loop that uses epoll and nothing else.
544		592
545	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	593	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
546	if (!epoller)	594	if (!epoller)
547	fatal ("no epoll found here, maybe it hides under your chair");	595	fatal ("no epoll found here, maybe it hides under your chair");
548		596
		597	Example: Use whatever libev has to offer, but make sure that kqueue is
		598	used if available.
		599
		600	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_KQUEUE);
		601
549	=item ev_default_destroy ()	602	=item ev_loop_destroy (loop)
550		603
551	Destroys the default loop again (frees all memory and kernel state	604	Destroys an event loop object (frees all memory and kernel state
552	etc.). None of the active event watchers will be stopped in the normal	605	etc.). None of the active event watchers will be stopped in the normal
553	sense, so e.g. C<ev_is_active> might still return true. It is your	606	sense, so e.g. C<ev_is_active> might still return true. It is your
554	responsibility to either stop all watchers cleanly yourself I<before>	607	responsibility to either stop all watchers cleanly yourself I<before>
555	calling this function, or cope with the fact afterwards (which is usually	608	calling this function, or cope with the fact afterwards (which is usually
556	the easiest thing, you can just ignore the watchers and/or C<free ()> them	609	the easiest thing, you can just ignore the watchers and/or C<free ()> them
…		…
558		611
559	Note that certain global state, such as signal state (and installed signal	612	Note that certain global state, such as signal state (and installed signal
560	handlers), will not be freed by this function, and related watchers (such	613	handlers), will not be freed by this function, and related watchers (such
561	as signal and child watchers) would need to be stopped manually.	614	as signal and child watchers) would need to be stopped manually.
562		615
563	In general it is not advisable to call this function except in the	616	This function is normally used on loop objects allocated by
564	rare occasion where you really need to free e.g. the signal handling	617	C<ev_loop_new>, but it can also be used on the default loop returned by
		618	C<ev_default_loop>, in which case it is not thread-safe.
		619
		620	Note that it is not advisable to call this function on the default loop
		621	except in the rare occasion where you really need to free it's resources.
565	pipe fds. If you need dynamically allocated loops it is better to use	622	If you need dynamically allocated loops it is better to use C<ev_loop_new>
566	C<ev_loop_new> and C<ev_loop_destroy>).	623	and C<ev_loop_destroy>.
567		624
568	=item ev_loop_destroy (loop)	625	=item ev_loop_fork (loop)
569		626
570	Like C<ev_default_destroy>, but destroys an event loop created by an
571	earlier call to C<ev_loop_new>.
572
573	=item ev_default_fork ()
574
575	This function sets a flag that causes subsequent C<ev_loop> iterations	627	This function sets a flag that causes subsequent C<ev_run> iterations to
576	to reinitialise the kernel state for backends that have one. Despite the	628	reinitialise the kernel state for backends that have one. Despite the
577	name, you can call it anytime, but it makes most sense after forking, in	629	name, you can call it anytime, but it makes most sense after forking, in
578	the child process (or both child and parent, but that again makes little	630	the child process. You I<must> call it (or use C<EVFLAG_FORKCHECK>) in the
579	sense). You I<must> call it in the child before using any of the libev	631	child before resuming or calling C<ev_run>.
580	functions, and it will only take effect at the next C<ev_loop> iteration.	632
		633	Again, you I<have> to call it on I<any> loop that you want to re-use after
		634	a fork, I<even if you do not plan to use the loop in the parent>. This is
		635	because some kernel interfaces *cough* I<kqueue> *cough* do funny things
		636	during fork.
581		637
582	On the other hand, you only need to call this function in the child	638	On the other hand, you only need to call this function in the child
583	process if and only if you want to use the event library in the child. If	639	process if and only if you want to use the event loop in the child. If
584	you just fork+exec, you don't have to call it at all.	640	you just fork+exec or create a new loop in the child, you don't have to
		641	call it at all (in fact, C<epoll> is so badly broken that it makes a
		642	difference, but libev will usually detect this case on its own and do a
		643	costly reset of the backend).
585		644
586	The function itself is quite fast and it's usually not a problem to call	645	The function itself is quite fast and it's usually not a problem to call
587	it just in case after a fork. To make this easy, the function will fit in	646	it just in case after a fork.
588	quite nicely into a call to C<pthread_atfork>:
589		647
		648	Example: Automate calling C<ev_loop_fork> on the default loop when
		649	using pthreads.
		650
		651	static void
		652	post_fork_child (void)
		653	{
		654	ev_loop_fork (EV_DEFAULT);
		655	}
		656
		657	...
590	pthread_atfork (0, 0, ev_default_fork);	658	pthread_atfork (0, 0, post_fork_child);
591
592	=item ev_loop_fork (loop)
593
594	Like C<ev_default_fork>, but acts on an event loop created by
595	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
596	after fork that you want to re-use in the child, and how you do this is
597	entirely your own problem.
598		659
599	=item int ev_is_default_loop (loop)	660	=item int ev_is_default_loop (loop)
600		661
601	Returns true when the given loop is, in fact, the default loop, and false	662	Returns true when the given loop is, in fact, the default loop, and false
602	otherwise.	663	otherwise.
603		664
604	=item unsigned int ev_loop_count (loop)	665	=item unsigned int ev_iteration (loop)
605		666
606	Returns the count of loop iterations for the loop, which is identical to	667	Returns the current iteration count for the event loop, which is identical
607	the number of times libev did poll for new events. It starts at C<0> and	668	to the number of times libev did poll for new events. It starts at C<0>
608	happily wraps around with enough iterations.	669	and happily wraps around with enough iterations.
609		670
610	This value can sometimes be useful as a generation counter of sorts (it	671	This value can sometimes be useful as a generation counter of sorts (it
611	"ticks" the number of loop iterations), as it roughly corresponds with	672	"ticks" the number of loop iterations), as it roughly corresponds with
612	C<ev_prepare> and C<ev_check> calls.	673	C<ev_prepare> and C<ev_check> calls - and is incremented between the
		674	prepare and check phases.
		675
		676	=item unsigned int ev_depth (loop)
		677
		678	Returns the number of times C<ev_run> was entered minus the number of
		679	times C<ev_run> was exited, in other words, the recursion depth.
		680
		681	Outside C<ev_run>, this number is zero. In a callback, this number is
		682	C<1>, unless C<ev_run> was invoked recursively (or from another thread),
		683	in which case it is higher.
		684
		685	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread
		686	etc.), doesn't count as "exit" - consider this as a hint to avoid such
		687	ungentleman-like behaviour unless it's really convenient.
613		688
614	=item unsigned int ev_backend (loop)	689	=item unsigned int ev_backend (loop)
615		690
616	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	691	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
617	use.	692	use.
…		…
626		701
627	=item ev_now_update (loop)	702	=item ev_now_update (loop)
628		703
629	Establishes the current time by querying the kernel, updating the time	704	Establishes the current time by querying the kernel, updating the time
630	returned by C<ev_now ()> in the progress. This is a costly operation and	705	returned by C<ev_now ()> in the progress. This is a costly operation and
631	is usually done automatically within C<ev_loop ()>.	706	is usually done automatically within C<ev_run ()>.
632		707
633	This function is rarely useful, but when some event callback runs for a	708	This function is rarely useful, but when some event callback runs for a
634	very long time without entering the event loop, updating libev's idea of	709	very long time without entering the event loop, updating libev's idea of
635	the current time is a good idea.	710	the current time is a good idea.
636		711
637	See also "The special problem of time updates" in the C<ev_timer> section.	712	See also L<The special problem of time updates> in the C<ev_timer> section.
638		713
639	=item ev_suspend (loop)	714	=item ev_suspend (loop)
640		715
641	=item ev_resume (loop)	716	=item ev_resume (loop)
642		717
643	These two functions suspend and resume a loop, for use when the loop is	718	These two functions suspend and resume an event loop, for use when the
644	not used for a while and timeouts should not be processed.	719	loop is not used for a while and timeouts should not be processed.
645		720
646	A typical use case would be an interactive program such as a game: When	721	A typical use case would be an interactive program such as a game: When
647	the user presses C<^Z> to suspend the game and resumes it an hour later it	722	the user presses C<^Z> to suspend the game and resumes it an hour later it
648	would be best to handle timeouts as if no time had actually passed while	723	would be best to handle timeouts as if no time had actually passed while
649	the program was suspended. This can be achieved by calling C<ev_suspend>	724	the program was suspended. This can be achieved by calling C<ev_suspend>
…		…
651	C<ev_resume> directly afterwards to resume timer processing.	726	C<ev_resume> directly afterwards to resume timer processing.
652		727
653	Effectively, all C<ev_timer> watchers will be delayed by the time spend	728	Effectively, all C<ev_timer> watchers will be delayed by the time spend
654	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers	729	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers
655	will be rescheduled (that is, they will lose any events that would have	730	will be rescheduled (that is, they will lose any events that would have
656	occured while suspended).	731	occurred while suspended).
657		732
658	After calling C<ev_suspend> you B<must not> call I<any> function on the	733	After calling C<ev_suspend> you B<must not> call I<any> function on the
659	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>	734	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>
660	without a previous call to C<ev_suspend>.	735	without a previous call to C<ev_suspend>.
661		736
662	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the	737	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the
663	event loop time (see C<ev_now_update>).	738	event loop time (see C<ev_now_update>).
664		739
665	=item ev_loop (loop, int flags)	740	=item ev_run (loop, int flags)
666		741
667	Finally, this is it, the event handler. This function usually is called	742	Finally, this is it, the event handler. This function usually is called
668	after you initialised all your watchers and you want to start handling	743	after you have initialised all your watchers and you want to start
669	events.	744	handling events. It will ask the operating system for any new events, call
		745	the watcher callbacks, an then repeat the whole process indefinitely: This
		746	is why event loops are called I<loops>.
670		747
671	If the flags argument is specified as C<0>, it will not return until	748	If the flags argument is specified as C<0>, it will keep handling events
672	either no event watchers are active anymore or C<ev_unloop> was called.	749	until either no event watchers are active anymore or C<ev_break> was
		750	called.
673		751
674	Please note that an explicit C<ev_unloop> is usually better than	752	Please note that an explicit C<ev_break> is usually better than
675	relying on all watchers to be stopped when deciding when a program has	753	relying on all watchers to be stopped when deciding when a program has
676	finished (especially in interactive programs), but having a program	754	finished (especially in interactive programs), but having a program
677	that automatically loops as long as it has to and no longer by virtue	755	that automatically loops as long as it has to and no longer by virtue
678	of relying on its watchers stopping correctly, that is truly a thing of	756	of relying on its watchers stopping correctly, that is truly a thing of
679	beauty.	757	beauty.
680		758
681	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle	759	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle
682	those events and any already outstanding ones, but will not block your	760	those events and any already outstanding ones, but will not wait and
683	process in case there are no events and will return after one iteration of	761	block your process in case there are no events and will return after one
684	the loop.	762	iteration of the loop. This is sometimes useful to poll and handle new
		763	events while doing lengthy calculations, to keep the program responsive.
685		764
686	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if	765	A flags value of C<EVRUN_ONCE> will look for new events (waiting if
687	necessary) and will handle those and any already outstanding ones. It	766	necessary) and will handle those and any already outstanding ones. It
688	will block your process until at least one new event arrives (which could	767	will block your process until at least one new event arrives (which could
689	be an event internal to libev itself, so there is no guarantee that a	768	be an event internal to libev itself, so there is no guarantee that a
690	user-registered callback will be called), and will return after one	769	user-registered callback will be called), and will return after one
691	iteration of the loop.	770	iteration of the loop.
692		771
693	This is useful if you are waiting for some external event in conjunction	772	This is useful if you are waiting for some external event in conjunction
694	with something not expressible using other libev watchers (i.e. "roll your	773	with something not expressible using other libev watchers (i.e. "roll your
695	own C<ev_loop>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is	774	own C<ev_run>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is
696	usually a better approach for this kind of thing.	775	usually a better approach for this kind of thing.
697		776
698	Here are the gory details of what C<ev_loop> does:	777	Here are the gory details of what C<ev_run> does:
699		778
		779	- Increment loop depth.
		780	- Reset the ev_break status.
700	- Before the first iteration, call any pending watchers.	781	- Before the first iteration, call any pending watchers.
		782	LOOP:
701	* If EVFLAG_FORKCHECK was used, check for a fork.	783	- If EVFLAG_FORKCHECK was used, check for a fork.
702	- If a fork was detected (by any means), queue and call all fork watchers.	784	- If a fork was detected (by any means), queue and call all fork watchers.
703	- Queue and call all prepare watchers.	785	- Queue and call all prepare watchers.
		786	- If ev_break was called, goto FINISH.
704	- If we have been forked, detach and recreate the kernel state	787	- If we have been forked, detach and recreate the kernel state
705	as to not disturb the other process.	788	as to not disturb the other process.
706	- Update the kernel state with all outstanding changes.	789	- Update the kernel state with all outstanding changes.
707	- Update the "event loop time" (ev_now ()).	790	- Update the "event loop time" (ev_now ()).
708	- Calculate for how long to sleep or block, if at all	791	- Calculate for how long to sleep or block, if at all
709	(active idle watchers, EVLOOP_NONBLOCK or not having	792	(active idle watchers, EVRUN_NOWAIT or not having
710	any active watchers at all will result in not sleeping).	793	any active watchers at all will result in not sleeping).
711	- Sleep if the I/O and timer collect interval say so.	794	- Sleep if the I/O and timer collect interval say so.
		795	- Increment loop iteration counter.
712	- Block the process, waiting for any events.	796	- Block the process, waiting for any events.
713	- Queue all outstanding I/O (fd) events.	797	- Queue all outstanding I/O (fd) events.
714	- Update the "event loop time" (ev_now ()), and do time jump adjustments.	798	- Update the "event loop time" (ev_now ()), and do time jump adjustments.
715	- Queue all expired timers.	799	- Queue all expired timers.
716	- Queue all expired periodics.	800	- Queue all expired periodics.
717	- Unless any events are pending now, queue all idle watchers.	801	- Queue all idle watchers with priority higher than that of pending events.
718	- Queue all check watchers.	802	- Queue all check watchers.
719	- Call all queued watchers in reverse order (i.e. check watchers first).	803	- Call all queued watchers in reverse order (i.e. check watchers first).
720	Signals and child watchers are implemented as I/O watchers, and will	804	Signals and child watchers are implemented as I/O watchers, and will
721	be handled here by queueing them when their watcher gets executed.	805	be handled here by queueing them when their watcher gets executed.
722	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	806	- If ev_break has been called, or EVRUN_ONCE or EVRUN_NOWAIT
723	were used, or there are no active watchers, return, otherwise	807	were used, or there are no active watchers, goto FINISH, otherwise
724	continue with step *.	808	continue with step LOOP.
		809	FINISH:
		810	- Reset the ev_break status iff it was EVBREAK_ONE.
		811	- Decrement the loop depth.
		812	- Return.
725		813
726	Example: Queue some jobs and then loop until no events are outstanding	814	Example: Queue some jobs and then loop until no events are outstanding
727	anymore.	815	anymore.
728		816
729	... queue jobs here, make sure they register event watchers as long	817	... queue jobs here, make sure they register event watchers as long
730	... as they still have work to do (even an idle watcher will do..)	818	... as they still have work to do (even an idle watcher will do..)
731	ev_loop (my_loop, 0);	819	ev_run (my_loop, 0);
732	... jobs done or somebody called unloop. yeah!	820	... jobs done or somebody called unloop. yeah!
733		821
734	=item ev_unloop (loop, how)	822	=item ev_break (loop, how)
735		823
736	Can be used to make a call to C<ev_loop> return early (but only after it	824	Can be used to make a call to C<ev_run> return early (but only after it
737	has processed all outstanding events). The C<how> argument must be either	825	has processed all outstanding events). The C<how> argument must be either
738	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	826	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or
739	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	827	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.
740		828
741	This "unloop state" will be cleared when entering C<ev_loop> again.	829	This "break state" will be cleared when entering C<ev_run> again.
742		830
743	It is safe to call C<ev_unloop> from otuside any C<ev_loop> calls.	831	It is safe to call C<ev_break> from outside any C<ev_run> calls, too.
744		832
745	=item ev_ref (loop)	833	=item ev_ref (loop)
746		834
747	=item ev_unref (loop)	835	=item ev_unref (loop)
748		836
749	Ref/unref can be used to add or remove a reference count on the event	837	Ref/unref can be used to add or remove a reference count on the event
750	loop: Every watcher keeps one reference, and as long as the reference	838	loop: Every watcher keeps one reference, and as long as the reference
751	count is nonzero, C<ev_loop> will not return on its own.	839	count is nonzero, C<ev_run> will not return on its own.
752		840
753	If you have a watcher you never unregister that should not keep C<ev_loop>	841	This is useful when you have a watcher that you never intend to
754	from returning, call ev_unref() after starting, and ev_ref() before	842	unregister, but that nevertheless should not keep C<ev_run> from
		843	returning. In such a case, call C<ev_unref> after starting, and C<ev_ref>
755	stopping it.	844	before stopping it.
756		845
757	As an example, libev itself uses this for its internal signal pipe: It	846	As an example, libev itself uses this for its internal signal pipe: It
758	is not visible to the libev user and should not keep C<ev_loop> from	847	is not visible to the libev user and should not keep C<ev_run> from
759	exiting if no event watchers registered by it are active. It is also an	848	exiting if no event watchers registered by it are active. It is also an
760	excellent way to do this for generic recurring timers or from within	849	excellent way to do this for generic recurring timers or from within
761	third-party libraries. Just remember to I<unref after start> and I<ref	850	third-party libraries. Just remember to I<unref after start> and I<ref
762	before stop> (but only if the watcher wasn't active before, or was active	851	before stop> (but only if the watcher wasn't active before, or was active
763	before, respectively. Note also that libev might stop watchers itself	852	before, respectively. Note also that libev might stop watchers itself
764	(e.g. non-repeating timers) in which case you have to C<ev_ref>	853	(e.g. non-repeating timers) in which case you have to C<ev_ref>
765	in the callback).	854	in the callback).
766		855
767	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	856	Example: Create a signal watcher, but keep it from keeping C<ev_run>
768	running when nothing else is active.	857	running when nothing else is active.
769		858
770	ev_signal exitsig;	859	ev_signal exitsig;
771	ev_signal_init (&exitsig, sig_cb, SIGINT);	860	ev_signal_init (&exitsig, sig_cb, SIGINT);
772	ev_signal_start (loop, &exitsig);	861	ev_signal_start (loop, &exitsig);
…		…
799		888
800	By setting a higher I<io collect interval> you allow libev to spend more	889	By setting a higher I<io collect interval> you allow libev to spend more
801	time collecting I/O events, so you can handle more events per iteration,	890	time collecting I/O events, so you can handle more events per iteration,
802	at the cost of increasing latency. Timeouts (both C<ev_periodic> and	891	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
803	C<ev_timer>) will be not affected. Setting this to a non-null value will	892	C<ev_timer>) will be not affected. Setting this to a non-null value will
804	introduce an additional C<ev_sleep ()> call into most loop iterations.	893	introduce an additional C<ev_sleep ()> call into most loop iterations. The
		894	sleep time ensures that libev will not poll for I/O events more often then
		895	once per this interval, on average.
805		896
806	Likewise, by setting a higher I<timeout collect interval> you allow libev	897	Likewise, by setting a higher I<timeout collect interval> you allow libev
807	to spend more time collecting timeouts, at the expense of increased	898	to spend more time collecting timeouts, at the expense of increased
808	latency/jitter/inexactness (the watcher callback will be called	899	latency/jitter/inexactness (the watcher callback will be called
809	later). C<ev_io> watchers will not be affected. Setting this to a non-null	900	later). C<ev_io> watchers will not be affected. Setting this to a non-null
…		…
811		902
812	Many (busy) programs can usually benefit by setting the I/O collect	903	Many (busy) programs can usually benefit by setting the I/O collect
813	interval to a value near C<0.1> or so, which is often enough for	904	interval to a value near C<0.1> or so, which is often enough for
814	interactive servers (of course not for games), likewise for timeouts. It	905	interactive servers (of course not for games), likewise for timeouts. It
815	usually doesn't make much sense to set it to a lower value than C<0.01>,	906	usually doesn't make much sense to set it to a lower value than C<0.01>,
816	as this approaches the timing granularity of most systems.	907	as this approaches the timing granularity of most systems. Note that if
		908	you do transactions with the outside world and you can't increase the
		909	parallelity, then this setting will limit your transaction rate (if you
		910	need to poll once per transaction and the I/O collect interval is 0.01,
		911	then you can't do more than 100 transactions per second).
817		912
818	Setting the I<timeout collect interval> can improve the opportunity for	913	Setting the I<timeout collect interval> can improve the opportunity for
819	saving power, as the program will "bundle" timer callback invocations that	914	saving power, as the program will "bundle" timer callback invocations that
820	are "near" in time together, by delaying some, thus reducing the number of	915	are "near" in time together, by delaying some, thus reducing the number of
821	times the process sleeps and wakes up again. Another useful technique to	916	times the process sleeps and wakes up again. Another useful technique to
822	reduce iterations/wake-ups is to use C<ev_periodic> watchers and make sure	917	reduce iterations/wake-ups is to use C<ev_periodic> watchers and make sure
823	they fire on, say, one-second boundaries only.	918	they fire on, say, one-second boundaries only.
824		919
		920	Example: we only need 0.1s timeout granularity, and we wish not to poll
		921	more often than 100 times per second:
		922
		923	ev_set_timeout_collect_interval (EV_DEFAULT_UC_ 0.1);
		924	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);
		925
		926	=item ev_invoke_pending (loop)
		927
		928	This call will simply invoke all pending watchers while resetting their
		929	pending state. Normally, C<ev_run> does this automatically when required,
		930	but when overriding the invoke callback this call comes handy. This
		931	function can be invoked from a watcher - this can be useful for example
		932	when you want to do some lengthy calculation and want to pass further
		933	event handling to another thread (you still have to make sure only one
		934	thread executes within C<ev_invoke_pending> or C<ev_run> of course).
		935
		936	=item int ev_pending_count (loop)
		937
		938	Returns the number of pending watchers - zero indicates that no watchers
		939	are pending.
		940
		941	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))
		942
		943	This overrides the invoke pending functionality of the loop: Instead of
		944	invoking all pending watchers when there are any, C<ev_run> will call
		945	this callback instead. This is useful, for example, when you want to
		946	invoke the actual watchers inside another context (another thread etc.).
		947
		948	If you want to reset the callback, use C<ev_invoke_pending> as new
		949	callback.
		950
		951	=item ev_set_loop_release_cb (loop, void (*release)(EV_P), void (*acquire)(EV_P))
		952
		953	Sometimes you want to share the same loop between multiple threads. This
		954	can be done relatively simply by putting mutex_lock/unlock calls around
		955	each call to a libev function.
		956
		957	However, C<ev_run> can run an indefinite time, so it is not feasible
		958	to wait for it to return. One way around this is to wake up the event
		959	loop via C<ev_break> and C<av_async_send>, another way is to set these
		960	I<release> and I<acquire> callbacks on the loop.
		961
		962	When set, then C<release> will be called just before the thread is
		963	suspended waiting for new events, and C<acquire> is called just
		964	afterwards.
		965
		966	Ideally, C<release> will just call your mutex_unlock function, and
		967	C<acquire> will just call the mutex_lock function again.
		968
		969	While event loop modifications are allowed between invocations of
		970	C<release> and C<acquire> (that's their only purpose after all), no
		971	modifications done will affect the event loop, i.e. adding watchers will
		972	have no effect on the set of file descriptors being watched, or the time
		973	waited. Use an C<ev_async> watcher to wake up C<ev_run> when you want it
		974	to take note of any changes you made.
		975
		976	In theory, threads executing C<ev_run> will be async-cancel safe between
		977	invocations of C<release> and C<acquire>.
		978
		979	See also the locking example in the C<THREADS> section later in this
		980	document.
		981
		982	=item ev_set_userdata (loop, void *data)
		983
		984	=item ev_userdata (loop)
		985
		986	Set and retrieve a single C<void *> associated with a loop. When
		987	C<ev_set_userdata> has never been called, then C<ev_userdata> returns
		988	C<0.>
		989
		990	These two functions can be used to associate arbitrary data with a loop,
		991	and are intended solely for the C<invoke_pending_cb>, C<release> and
		992	C<acquire> callbacks described above, but of course can be (ab-)used for
		993	any other purpose as well.
		994
825	=item ev_loop_verify (loop)	995	=item ev_verify (loop)
826		996
827	This function only does something when C<EV_VERIFY> support has been	997	This function only does something when C<EV_VERIFY> support has been
828	compiled in, which is the default for non-minimal builds. It tries to go	998	compiled in, which is the default for non-minimal builds. It tries to go
829	through all internal structures and checks them for validity. If anything	999	through all internal structures and checks them for validity. If anything
830	is found to be inconsistent, it will print an error message to standard	1000	is found to be inconsistent, it will print an error message to standard
…		…
841		1011
842	In the following description, uppercase C<TYPE> in names stands for the	1012	In the following description, uppercase C<TYPE> in names stands for the
843	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer	1013	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer
844	watchers and C<ev_io_start> for I/O watchers.	1014	watchers and C<ev_io_start> for I/O watchers.
845		1015
846	A watcher is a structure that you create and register to record your	1016	A watcher is an opaque structure that you allocate and register to record
847	interest in some event. For instance, if you want to wait for STDIN to	1017	your interest in some event. To make a concrete example, imagine you want
848	become readable, you would create an C<ev_io> watcher for that:	1018	to wait for STDIN to become readable, you would create an C<ev_io> watcher
		1019	for that:
849		1020
850	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)	1021	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)
851	{	1022	{
852	ev_io_stop (w);	1023	ev_io_stop (w);
853	ev_unloop (loop, EVUNLOOP_ALL);	1024	ev_break (loop, EVBREAK_ALL);
854	}	1025	}
855		1026
856	struct ev_loop *loop = ev_default_loop (0);	1027	struct ev_loop *loop = ev_default_loop (0);
857		1028
858	ev_io stdin_watcher;	1029	ev_io stdin_watcher;
859		1030
860	ev_init (&stdin_watcher, my_cb);	1031	ev_init (&stdin_watcher, my_cb);
861	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);	1032	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
862	ev_io_start (loop, &stdin_watcher);	1033	ev_io_start (loop, &stdin_watcher);
863		1034
864	ev_loop (loop, 0);	1035	ev_run (loop, 0);
865		1036
866	As you can see, you are responsible for allocating the memory for your	1037	As you can see, you are responsible for allocating the memory for your
867	watcher structures (and it is I<usually> a bad idea to do this on the	1038	watcher structures (and it is I<usually> a bad idea to do this on the
868	stack).	1039	stack).
869		1040
870	Each watcher has an associated watcher structure (called C<struct ev_TYPE>	1041	Each watcher has an associated watcher structure (called C<struct ev_TYPE>
871	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).	1042	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).
872		1043
873	Each watcher structure must be initialised by a call to C<ev_init	1044	Each watcher structure must be initialised by a call to C<ev_init (watcher
874	(watcher *, callback)>, which expects a callback to be provided. This	1045	*, callback)>, which expects a callback to be provided. This callback is
875	callback gets invoked each time the event occurs (or, in the case of I/O	1046	invoked each time the event occurs (or, in the case of I/O watchers, each
876	watchers, each time the event loop detects that the file descriptor given	1047	time the event loop detects that the file descriptor given is readable
877	is readable and/or writable).	1048	and/or writable).
878		1049
879	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>	1050	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>
880	macro to configure it, with arguments specific to the watcher type. There	1051	macro to configure it, with arguments specific to the watcher type. There
881	is also a macro to combine initialisation and setting in one call: C<<	1052	is also a macro to combine initialisation and setting in one call: C<<
882	ev_TYPE_init (watcher *, callback, ...) >>.	1053	ev_TYPE_init (watcher *, callback, ...) >>.
…		…
905	=item C<EV_WRITE>	1076	=item C<EV_WRITE>
906		1077
907	The file descriptor in the C<ev_io> watcher has become readable and/or	1078	The file descriptor in the C<ev_io> watcher has become readable and/or
908	writable.	1079	writable.
909		1080
910	=item C<EV_TIMEOUT>	1081	=item C<EV_TIMER>
911		1082
912	The C<ev_timer> watcher has timed out.	1083	The C<ev_timer> watcher has timed out.
913		1084
914	=item C<EV_PERIODIC>	1085	=item C<EV_PERIODIC>
915		1086
…		…
933		1104
934	=item C<EV_PREPARE>	1105	=item C<EV_PREPARE>
935		1106
936	=item C<EV_CHECK>	1107	=item C<EV_CHECK>
937		1108
938	All C<ev_prepare> watchers are invoked just I<before> C<ev_loop> starts	1109	All C<ev_prepare> watchers are invoked just I<before> C<ev_run> starts
939	to gather new events, and all C<ev_check> watchers are invoked just after	1110	to gather new events, and all C<ev_check> watchers are invoked just after
940	C<ev_loop> has gathered them, but before it invokes any callbacks for any	1111	C<ev_run> has gathered them, but before it invokes any callbacks for any
941	received events. Callbacks of both watcher types can start and stop as	1112	received events. Callbacks of both watcher types can start and stop as
942	many watchers as they want, and all of them will be taken into account	1113	many watchers as they want, and all of them will be taken into account
943	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	1114	(for example, a C<ev_prepare> watcher might start an idle watcher to keep
944	C<ev_loop> from blocking).	1115	C<ev_run> from blocking).
945		1116
946	=item C<EV_EMBED>	1117	=item C<EV_EMBED>
947		1118
948	The embedded event loop specified in the C<ev_embed> watcher needs attention.	1119	The embedded event loop specified in the C<ev_embed> watcher needs attention.
949		1120
950	=item C<EV_FORK>	1121	=item C<EV_FORK>
951		1122
952	The event loop has been resumed in the child process after fork (see	1123	The event loop has been resumed in the child process after fork (see
953	C<ev_fork>).	1124	C<ev_fork>).
		1125
		1126	=item C<EV_CLEANUP>
		1127
		1128	The event loop is about to be destroyed (see C<ev_cleanup>).
954		1129
955	=item C<EV_ASYNC>	1130	=item C<EV_ASYNC>
956		1131
957	The given async watcher has been asynchronously notified (see C<ev_async>).	1132	The given async watcher has been asynchronously notified (see C<ev_async>).
958		1133
…		…
1005		1180
1006	ev_io w;	1181	ev_io w;
1007	ev_init (&w, my_cb);	1182	ev_init (&w, my_cb);
1008	ev_io_set (&w, STDIN_FILENO, EV_READ);	1183	ev_io_set (&w, STDIN_FILENO, EV_READ);
1009		1184
1010	=item C<ev_TYPE_set> (ev_TYPE *, [args])	1185	=item C<ev_TYPE_set> (ev_TYPE *watcher, [args])
1011		1186
1012	This macro initialises the type-specific parts of a watcher. You need to	1187	This macro initialises the type-specific parts of a watcher. You need to
1013	call C<ev_init> at least once before you call this macro, but you can	1188	call C<ev_init> at least once before you call this macro, but you can
1014	call C<ev_TYPE_set> any number of times. You must not, however, call this	1189	call C<ev_TYPE_set> any number of times. You must not, however, call this
1015	macro on a watcher that is active (it can be pending, however, which is a	1190	macro on a watcher that is active (it can be pending, however, which is a
…		…
1028		1203
1029	Example: Initialise and set an C<ev_io> watcher in one step.	1204	Example: Initialise and set an C<ev_io> watcher in one step.
1030		1205
1031	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);	1206	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);
1032		1207
1033	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)	1208	=item C<ev_TYPE_start> (loop, ev_TYPE *watcher)
1034		1209
1035	Starts (activates) the given watcher. Only active watchers will receive	1210	Starts (activates) the given watcher. Only active watchers will receive
1036	events. If the watcher is already active nothing will happen.	1211	events. If the watcher is already active nothing will happen.
1037		1212
1038	Example: Start the C<ev_io> watcher that is being abused as example in this	1213	Example: Start the C<ev_io> watcher that is being abused as example in this
1039	whole section.	1214	whole section.
1040		1215
1041	ev_io_start (EV_DEFAULT_UC, &w);	1216	ev_io_start (EV_DEFAULT_UC, &w);
1042		1217
1043	=item C<ev_TYPE_stop> (loop *, ev_TYPE *watcher)	1218	=item C<ev_TYPE_stop> (loop, ev_TYPE *watcher)
1044		1219
1045	Stops the given watcher if active, and clears the pending status (whether	1220	Stops the given watcher if active, and clears the pending status (whether
1046	the watcher was active or not).	1221	the watcher was active or not).
1047		1222
1048	It is possible that stopped watchers are pending - for example,	1223	It is possible that stopped watchers are pending - for example,
…		…
1073	=item ev_cb_set (ev_TYPE *watcher, callback)	1248	=item ev_cb_set (ev_TYPE *watcher, callback)
1074		1249
1075	Change the callback. You can change the callback at virtually any time	1250	Change the callback. You can change the callback at virtually any time
1076	(modulo threads).	1251	(modulo threads).
1077		1252
1078	=item ev_set_priority (ev_TYPE *watcher, priority)	1253	=item ev_set_priority (ev_TYPE *watcher, int priority)
1079		1254
1080	=item int ev_priority (ev_TYPE *watcher)	1255	=item int ev_priority (ev_TYPE *watcher)
1081		1256
1082	Set and query the priority of the watcher. The priority is a small	1257	Set and query the priority of the watcher. The priority is a small
1083	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>	1258	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
…		…
1115	watcher isn't pending it does nothing and returns C<0>.	1290	watcher isn't pending it does nothing and returns C<0>.
1116		1291
1117	Sometimes it can be useful to "poll" a watcher instead of waiting for its	1292	Sometimes it can be useful to "poll" a watcher instead of waiting for its
1118	callback to be invoked, which can be accomplished with this function.	1293	callback to be invoked, which can be accomplished with this function.
1119		1294
		1295	=item ev_feed_event (loop, ev_TYPE *watcher, int revents)
		1296
		1297	Feeds the given event set into the event loop, as if the specified event
		1298	had happened for the specified watcher (which must be a pointer to an
		1299	initialised but not necessarily started event watcher). Obviously you must
		1300	not free the watcher as long as it has pending events.
		1301
		1302	Stopping the watcher, letting libev invoke it, or calling
		1303	C<ev_clear_pending> will clear the pending event, even if the watcher was
		1304	not started in the first place.
		1305
		1306	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
		1307	functions that do not need a watcher.
		1308
1120	=back	1309	=back
1121
1122		1310
1123	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	1311	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
1124		1312
1125	Each watcher has, by default, a member C<void *data> that you can change	1313	Each watcher has, by default, a member C<void *data> that you can change
1126	and read at any time: libev will completely ignore it. This can be used	1314	and read at any time: libev will completely ignore it. This can be used
…		…
1172	#include <stddef.h>	1360	#include <stddef.h>
1173		1361
1174	static void	1362	static void
1175	t1_cb (EV_P_ ev_timer *w, int revents)	1363	t1_cb (EV_P_ ev_timer *w, int revents)
1176	{	1364	{
1177	struct my_biggy big = (struct my_biggy *	1365	struct my_biggy big = (struct my_biggy *)
1178	(((char *)w) - offsetof (struct my_biggy, t1));	1366	(((char *)w) - offsetof (struct my_biggy, t1));
1179	}	1367	}
1180		1368
1181	static void	1369	static void
1182	t2_cb (EV_P_ ev_timer *w, int revents)	1370	t2_cb (EV_P_ ev_timer *w, int revents)
1183	{	1371	{
1184	struct my_biggy big = (struct my_biggy *	1372	struct my_biggy big = (struct my_biggy *)
1185	(((char *)w) - offsetof (struct my_biggy, t2));	1373	(((char *)w) - offsetof (struct my_biggy, t2));
1186	}	1374	}
		1375
		1376	=head2 WATCHER STATES
		1377
		1378	There are various watcher states mentioned throughout this manual -
		1379	active, pending and so on. In this section these states and the rules to
		1380	transition between them will be described in more detail - and while these
		1381	rules might look complicated, they usually do "the right thing".
		1382
		1383	=over 4
		1384
		1385	=item initialiased
		1386
		1387	Before a watcher can be registered with the event looop it has to be
		1388	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
		1389	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
		1390
		1391	In this state it is simply some block of memory that is suitable for use
		1392	in an event loop. It can be moved around, freed, reused etc. at will.
		1393
		1394	=item started/running/active
		1395
		1396	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
		1397	property of the event loop, and is actively waiting for events. While in
		1398	this state it cannot be accessed (except in a few documented ways), moved,
		1399	freed or anything else - the only legal thing is to keep a pointer to it,
		1400	and call libev functions on it that are documented to work on active watchers.
		1401
		1402	=item pending
		1403
		1404	If a watcher is active and libev determines that an event it is interested
		1405	in has occurred (such as a timer expiring), it will become pending. It will
		1406	stay in this pending state until either it is stopped or its callback is
		1407	about to be invoked, so it is not normally pending inside the watcher
		1408	callback.
		1409
		1410	The watcher might or might not be active while it is pending (for example,
		1411	an expired non-repeating timer can be pending but no longer active). If it
		1412	is stopped, it can be freely accessed (e.g. by calling C<ev_TYPE_set>),
		1413	but it is still property of the event loop at this time, so cannot be
		1414	moved, freed or reused. And if it is active the rules described in the
		1415	previous item still apply.
		1416
		1417	It is also possible to feed an event on a watcher that is not active (e.g.
		1418	via C<ev_feed_event>), in which case it becomes pending without being
		1419	active.
		1420
		1421	=item stopped
		1422
		1423	A watcher can be stopped implicitly by libev (in which case it might still
		1424	be pending), or explicitly by calling its C<ev_TYPE_stop> function. The
		1425	latter will clear any pending state the watcher might be in, regardless
		1426	of whether it was active or not, so stopping a watcher explicitly before
		1427	freeing it is often a good idea.
		1428
		1429	While stopped (and not pending) the watcher is essentially in the
		1430	initialised state, that is it can be reused, moved, modified in any way
		1431	you wish.
		1432
		1433	=back
1187		1434
1188	=head2 WATCHER PRIORITY MODELS	1435	=head2 WATCHER PRIORITY MODELS
1189		1436
1190	Many event loops support I<watcher priorities>, which are usually small	1437	Many event loops support I<watcher priorities>, which are usually small
1191	integers that influence the ordering of event callback invocation	1438	integers that influence the ordering of event callback invocation
…		…
1234		1481
1235	For example, to emulate how many other event libraries handle priorities,	1482	For example, to emulate how many other event libraries handle priorities,
1236	you can associate an C<ev_idle> watcher to each such watcher, and in	1483	you can associate an C<ev_idle> watcher to each such watcher, and in
1237	the normal watcher callback, you just start the idle watcher. The real	1484	the normal watcher callback, you just start the idle watcher. The real
1238	processing is done in the idle watcher callback. This causes libev to	1485	processing is done in the idle watcher callback. This causes libev to
1239	continously poll and process kernel event data for the watcher, but when	1486	continuously poll and process kernel event data for the watcher, but when
1240	the lock-out case is known to be rare (which in turn is rare :), this is	1487	the lock-out case is known to be rare (which in turn is rare :), this is
1241	workable.	1488	workable.
1242		1489
1243	Usually, however, the lock-out model implemented that way will perform	1490	Usually, however, the lock-out model implemented that way will perform
1244	miserably under the type of load it was designed to handle. In that case,	1491	miserably under the type of load it was designed to handle. In that case,
…		…
1258	{	1505	{
1259	// stop the I/O watcher, we received the event, but	1506	// stop the I/O watcher, we received the event, but
1260	// are not yet ready to handle it.	1507	// are not yet ready to handle it.
1261	ev_io_stop (EV_A_ w);	1508	ev_io_stop (EV_A_ w);
1262		1509
1263	// start the idle watcher to ahndle the actual event.	1510	// start the idle watcher to handle the actual event.
1264	// it will not be executed as long as other watchers	1511	// it will not be executed as long as other watchers
1265	// with the default priority are receiving events.	1512	// with the default priority are receiving events.
1266	ev_idle_start (EV_A_ &idle);	1513	ev_idle_start (EV_A_ &idle);
1267	}	1514	}
1268		1515
1269	static void	1516	static void
1270	idle-cb (EV_P_ ev_idle *w, int revents)	1517	idle_cb (EV_P_ ev_idle *w, int revents)
1271	{	1518	{
1272	// actual processing	1519	// actual processing
1273	read (STDIN_FILENO, ...);	1520	read (STDIN_FILENO, ...);
1274		1521
1275	// have to start the I/O watcher again, as	1522	// have to start the I/O watcher again, as
…		…
1320	descriptors to non-blocking mode is also usually a good idea (but not	1567	descriptors to non-blocking mode is also usually a good idea (but not
1321	required if you know what you are doing).	1568	required if you know what you are doing).
1322		1569
1323	If you cannot use non-blocking mode, then force the use of a	1570	If you cannot use non-blocking mode, then force the use of a
1324	known-to-be-good backend (at the time of this writing, this includes only	1571	known-to-be-good backend (at the time of this writing, this includes only
1325	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>).	1572	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>). The same applies to file
		1573	descriptors for which non-blocking operation makes no sense (such as
		1574	files) - libev doesn't guarantee any specific behaviour in that case.
1326		1575
1327	Another thing you have to watch out for is that it is quite easy to	1576	Another thing you have to watch out for is that it is quite easy to
1328	receive "spurious" readiness notifications, that is your callback might	1577	receive "spurious" readiness notifications, that is your callback might
1329	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1578	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
1330	because there is no data. Not only are some backends known to create a	1579	because there is no data. Not only are some backends known to create a
…		…
1395		1644
1396	So when you encounter spurious, unexplained daemon exits, make sure you	1645	So when you encounter spurious, unexplained daemon exits, make sure you
1397	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon	1646	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
1398	somewhere, as that would have given you a big clue).	1647	somewhere, as that would have given you a big clue).
1399		1648
		1649	=head3 The special problem of accept()ing when you can't
		1650
		1651	Many implementations of the POSIX C<accept> function (for example,
		1652	found in post-2004 Linux) have the peculiar behaviour of not removing a
		1653	connection from the pending queue in all error cases.
		1654
		1655	For example, larger servers often run out of file descriptors (because
		1656	of resource limits), causing C<accept> to fail with C<ENFILE> but not
		1657	rejecting the connection, leading to libev signalling readiness on
		1658	the next iteration again (the connection still exists after all), and
		1659	typically causing the program to loop at 100% CPU usage.
		1660
		1661	Unfortunately, the set of errors that cause this issue differs between
		1662	operating systems, there is usually little the app can do to remedy the
		1663	situation, and no known thread-safe method of removing the connection to
		1664	cope with overload is known (to me).
		1665
		1666	One of the easiest ways to handle this situation is to just ignore it
		1667	- when the program encounters an overload, it will just loop until the
		1668	situation is over. While this is a form of busy waiting, no OS offers an
		1669	event-based way to handle this situation, so it's the best one can do.
		1670
		1671	A better way to handle the situation is to log any errors other than
		1672	C<EAGAIN> and C<EWOULDBLOCK>, making sure not to flood the log with such
		1673	messages, and continue as usual, which at least gives the user an idea of
		1674	what could be wrong ("raise the ulimit!"). For extra points one could stop
		1675	the C<ev_io> watcher on the listening fd "for a while", which reduces CPU
		1676	usage.
		1677
		1678	If your program is single-threaded, then you could also keep a dummy file
		1679	descriptor for overload situations (e.g. by opening F</dev/null>), and
		1680	when you run into C<ENFILE> or C<EMFILE>, close it, run C<accept>,
		1681	close that fd, and create a new dummy fd. This will gracefully refuse
		1682	clients under typical overload conditions.
		1683
		1684	The last way to handle it is to simply log the error and C<exit>, as
		1685	is often done with C<malloc> failures, but this results in an easy
		1686	opportunity for a DoS attack.
1400		1687
1401	=head3 Watcher-Specific Functions	1688	=head3 Watcher-Specific Functions
1402		1689
1403	=over 4	1690	=over 4
1404		1691
…		…
1436	...	1723	...
1437	struct ev_loop *loop = ev_default_init (0);	1724	struct ev_loop *loop = ev_default_init (0);
1438	ev_io stdin_readable;	1725	ev_io stdin_readable;
1439	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);	1726	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
1440	ev_io_start (loop, &stdin_readable);	1727	ev_io_start (loop, &stdin_readable);
1441	ev_loop (loop, 0);	1728	ev_run (loop, 0);
1442		1729
1443		1730
1444	=head2 C<ev_timer> - relative and optionally repeating timeouts	1731	=head2 C<ev_timer> - relative and optionally repeating timeouts
1445		1732
1446	Timer watchers are simple relative timers that generate an event after a	1733	Timer watchers are simple relative timers that generate an event after a
…		…
1451	year, it will still time out after (roughly) one hour. "Roughly" because	1738	year, it will still time out after (roughly) one hour. "Roughly" because
1452	detecting time jumps is hard, and some inaccuracies are unavoidable (the	1739	detecting time jumps is hard, and some inaccuracies are unavoidable (the
1453	monotonic clock option helps a lot here).	1740	monotonic clock option helps a lot here).
1454		1741
1455	The callback is guaranteed to be invoked only I<after> its timeout has	1742	The callback is guaranteed to be invoked only I<after> its timeout has
1456	passed. If multiple timers become ready during the same loop iteration	1743	passed (not I<at>, so on systems with very low-resolution clocks this
1457	then the ones with earlier time-out values are invoked before ones with	1744	might introduce a small delay). If multiple timers become ready during the
1458	later time-out values (but this is no longer true when a callback calls	1745	same loop iteration then the ones with earlier time-out values are invoked
1459	C<ev_loop> recursively).	1746	before ones of the same priority with later time-out values (but this is
		1747	no longer true when a callback calls C<ev_run> recursively).
1460		1748
1461	=head3 Be smart about timeouts	1749	=head3 Be smart about timeouts
1462		1750
1463	Many real-world problems involve some kind of timeout, usually for error	1751	Many real-world problems involve some kind of timeout, usually for error
1464	recovery. A typical example is an HTTP request - if the other side hangs,	1752	recovery. A typical example is an HTTP request - if the other side hangs,
…		…
1508	C<after> argument to C<ev_timer_set>, and only ever use the C<repeat>	1796	C<after> argument to C<ev_timer_set>, and only ever use the C<repeat>
1509	member and C<ev_timer_again>.	1797	member and C<ev_timer_again>.
1510		1798
1511	At start:	1799	At start:
1512		1800
1513	ev_timer_init (timer, callback);	1801	ev_init (timer, callback);
1514	timer->repeat = 60.;	1802	timer->repeat = 60.;
1515	ev_timer_again (loop, timer);	1803	ev_timer_again (loop, timer);
1516		1804
1517	Each time there is some activity:	1805	Each time there is some activity:
1518		1806
…		…
1550	ev_tstamp timeout = last_activity + 60.;	1838	ev_tstamp timeout = last_activity + 60.;
1551		1839
1552	// if last_activity + 60. is older than now, we did time out	1840	// if last_activity + 60. is older than now, we did time out
1553	if (timeout < now)	1841	if (timeout < now)
1554	{	1842	{
1555	// timeout occured, take action	1843	// timeout occurred, take action
1556	}	1844	}
1557	else	1845	else
1558	{	1846	{
1559	// callback was invoked, but there was some activity, re-arm	1847	// callback was invoked, but there was some activity, re-arm
1560	// the watcher to fire in last_activity + 60, which is	1848	// the watcher to fire in last_activity + 60, which is
…		…
1580		1868
1581	To start the timer, simply initialise the watcher and set C<last_activity>	1869	To start the timer, simply initialise the watcher and set C<last_activity>
1582	to the current time (meaning we just have some activity :), then call the	1870	to the current time (meaning we just have some activity :), then call the
1583	callback, which will "do the right thing" and start the timer:	1871	callback, which will "do the right thing" and start the timer:
1584		1872
1585	ev_timer_init (timer, callback);	1873	ev_init (timer, callback);
1586	last_activity = ev_now (loop);	1874	last_activity = ev_now (loop);
1587	callback (loop, timer, EV_TIMEOUT);	1875	callback (loop, timer, EV_TIMER);
1588		1876
1589	And when there is some activity, simply store the current time in	1877	And when there is some activity, simply store the current time in
1590	C<last_activity>, no libev calls at all:	1878	C<last_activity>, no libev calls at all:
1591		1879
1592	last_actiivty = ev_now (loop);	1880	last_activity = ev_now (loop);
1593		1881
1594	This technique is slightly more complex, but in most cases where the	1882	This technique is slightly more complex, but in most cases where the
1595	time-out is unlikely to be triggered, much more efficient.	1883	time-out is unlikely to be triggered, much more efficient.
1596		1884
1597	Changing the timeout is trivial as well (if it isn't hard-coded in the	1885	Changing the timeout is trivial as well (if it isn't hard-coded in the
…		…
1635		1923
1636	=head3 The special problem of time updates	1924	=head3 The special problem of time updates
1637		1925
1638	Establishing the current time is a costly operation (it usually takes at	1926	Establishing the current time is a costly operation (it usually takes at
1639	least two system calls): EV therefore updates its idea of the current	1927	least two system calls): EV therefore updates its idea of the current
1640	time only before and after C<ev_loop> collects new events, which causes a	1928	time only before and after C<ev_run> collects new events, which causes a
1641	growing difference between C<ev_now ()> and C<ev_time ()> when handling	1929	growing difference between C<ev_now ()> and C<ev_time ()> when handling
1642	lots of events in one iteration.	1930	lots of events in one iteration.
1643		1931
1644	The relative timeouts are calculated relative to the C<ev_now ()>	1932	The relative timeouts are calculated relative to the C<ev_now ()>
1645	time. This is usually the right thing as this timestamp refers to the time	1933	time. This is usually the right thing as this timestamp refers to the time
…		…
1651		1939
1652	If the event loop is suspended for a long time, you can also force an	1940	If the event loop is suspended for a long time, you can also force an
1653	update of the time returned by C<ev_now ()> by calling C<ev_now_update	1941	update of the time returned by C<ev_now ()> by calling C<ev_now_update
1654	()>.	1942	()>.
1655		1943
		1944	=head3 The special problems of suspended animation
		1945
		1946	When you leave the server world it is quite customary to hit machines that
		1947	can suspend/hibernate - what happens to the clocks during such a suspend?
		1948
		1949	Some quick tests made with a Linux 2.6.28 indicate that a suspend freezes
		1950	all processes, while the clocks (C<times>, C<CLOCK_MONOTONIC>) continue
		1951	to run until the system is suspended, but they will not advance while the
		1952	system is suspended. That means, on resume, it will be as if the program
		1953	was frozen for a few seconds, but the suspend time will not be counted
		1954	towards C<ev_timer> when a monotonic clock source is used. The real time
		1955	clock advanced as expected, but if it is used as sole clocksource, then a
		1956	long suspend would be detected as a time jump by libev, and timers would
		1957	be adjusted accordingly.
		1958
		1959	I would not be surprised to see different behaviour in different between
		1960	operating systems, OS versions or even different hardware.
		1961
		1962	The other form of suspend (job control, or sending a SIGSTOP) will see a
		1963	time jump in the monotonic clocks and the realtime clock. If the program
		1964	is suspended for a very long time, and monotonic clock sources are in use,
		1965	then you can expect C<ev_timer>s to expire as the full suspension time
		1966	will be counted towards the timers. When no monotonic clock source is in
		1967	use, then libev will again assume a timejump and adjust accordingly.
		1968
		1969	It might be beneficial for this latter case to call C<ev_suspend>
		1970	and C<ev_resume> in code that handles C<SIGTSTP>, to at least get
		1971	deterministic behaviour in this case (you can do nothing against
		1972	C<SIGSTOP>).
		1973
1656	=head3 Watcher-Specific Functions and Data Members	1974	=head3 Watcher-Specific Functions and Data Members
1657		1975
1658	=over 4	1976	=over 4
1659		1977
1660	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	1978	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
…		…
1686	C<repeat> value), or reset the running timer to the C<repeat> value.	2004	C<repeat> value), or reset the running timer to the C<repeat> value.
1687		2005
1688	This sounds a bit complicated, see L<Be smart about timeouts>, above, for a	2006	This sounds a bit complicated, see L<Be smart about timeouts>, above, for a
1689	usage example.	2007	usage example.
1690		2008
		2009	=item ev_tstamp ev_timer_remaining (loop, ev_timer *)
		2010
		2011	Returns the remaining time until a timer fires. If the timer is active,
		2012	then this time is relative to the current event loop time, otherwise it's
		2013	the timeout value currently configured.
		2014
		2015	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns
		2016	C<5>. When the timer is started and one second passes, C<ev_timer_remaining>
		2017	will return C<4>. When the timer expires and is restarted, it will return
		2018	roughly C<7> (likely slightly less as callback invocation takes some time,
		2019	too), and so on.
		2020
1691	=item ev_tstamp repeat [read-write]	2021	=item ev_tstamp repeat [read-write]
1692		2022
1693	The current C<repeat> value. Will be used each time the watcher times out	2023	The current C<repeat> value. Will be used each time the watcher times out
1694	or C<ev_timer_again> is called, and determines the next timeout (if any),	2024	or C<ev_timer_again> is called, and determines the next timeout (if any),
1695	which is also when any modifications are taken into account.	2025	which is also when any modifications are taken into account.
…		…
1720	}	2050	}
1721		2051
1722	ev_timer mytimer;	2052	ev_timer mytimer;
1723	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */	2053	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
1724	ev_timer_again (&mytimer); /* start timer */	2054	ev_timer_again (&mytimer); /* start timer */
1725	ev_loop (loop, 0);	2055	ev_run (loop, 0);
1726		2056
1727	// and in some piece of code that gets executed on any "activity":	2057	// and in some piece of code that gets executed on any "activity":
1728	// reset the timeout to start ticking again at 10 seconds	2058	// reset the timeout to start ticking again at 10 seconds
1729	ev_timer_again (&mytimer);	2059	ev_timer_again (&mytimer);
1730		2060
…		…
1756		2086
1757	As with timers, the callback is guaranteed to be invoked only when the	2087	As with timers, the callback is guaranteed to be invoked only when the
1758	point in time where it is supposed to trigger has passed. If multiple	2088	point in time where it is supposed to trigger has passed. If multiple
1759	timers become ready during the same loop iteration then the ones with	2089	timers become ready during the same loop iteration then the ones with
1760	earlier time-out values are invoked before ones with later time-out values	2090	earlier time-out values are invoked before ones with later time-out values
1761	(but this is no longer true when a callback calls C<ev_loop> recursively).	2091	(but this is no longer true when a callback calls C<ev_run> recursively).
1762		2092
1763	=head3 Watcher-Specific Functions and Data Members	2093	=head3 Watcher-Specific Functions and Data Members
1764		2094
1765	=over 4	2095	=over 4
1766		2096
…		…
1894	Example: Call a callback every hour, or, more precisely, whenever the	2224	Example: Call a callback every hour, or, more precisely, whenever the
1895	system time is divisible by 3600. The callback invocation times have	2225	system time is divisible by 3600. The callback invocation times have
1896	potentially a lot of jitter, but good long-term stability.	2226	potentially a lot of jitter, but good long-term stability.
1897		2227
1898	static void	2228	static void
1899	clock_cb (struct ev_loop *loop, ev_io *w, int revents)	2229	clock_cb (struct ev_loop *loop, ev_periodic *w, int revents)
1900	{	2230	{
1901	... its now a full hour (UTC, or TAI or whatever your clock follows)	2231	... its now a full hour (UTC, or TAI or whatever your clock follows)
1902	}	2232	}
1903		2233
1904	ev_periodic hourly_tick;	2234	ev_periodic hourly_tick;
…		…
1930	Signal watchers will trigger an event when the process receives a specific	2260	Signal watchers will trigger an event when the process receives a specific
1931	signal one or more times. Even though signals are very asynchronous, libev	2261	signal one or more times. Even though signals are very asynchronous, libev
1932	will try it's best to deliver signals synchronously, i.e. as part of the	2262	will try it's best to deliver signals synchronously, i.e. as part of the
1933	normal event processing, like any other event.	2263	normal event processing, like any other event.
1934		2264
1935	If you want signals asynchronously, just use C<sigaction> as you would	2265	If you want signals to be delivered truly asynchronously, just use
1936	do without libev and forget about sharing the signal. You can even use	2266	C<sigaction> as you would do without libev and forget about sharing
1937	C<ev_async> from a signal handler to synchronously wake up an event loop.	2267	the signal. You can even use C<ev_async> from a signal handler to
		2268	synchronously wake up an event loop.
1938		2269
1939	You can configure as many watchers as you like per signal. Only when the	2270	You can configure as many watchers as you like for the same signal, but
		2271	only within the same loop, i.e. you can watch for C<SIGINT> in your
		2272	default loop and for C<SIGIO> in another loop, but you cannot watch for
		2273	C<SIGINT> in both the default loop and another loop at the same time. At
		2274	the moment, C<SIGCHLD> is permanently tied to the default loop.
		2275
1940	first watcher gets started will libev actually register a signal handler	2276	When the first watcher gets started will libev actually register something
1941	with the kernel (thus it coexists with your own signal handlers as long as	2277	with the kernel (thus it coexists with your own signal handlers as long as
1942	you don't register any with libev for the same signal). Similarly, when	2278	you don't register any with libev for the same signal).
1943	the last signal watcher for a signal is stopped, libev will reset the
1944	signal handler to SIG_DFL (regardless of what it was set to before).
1945		2279
1946	If possible and supported, libev will install its handlers with	2280	If possible and supported, libev will install its handlers with
1947	C<SA_RESTART> behaviour enabled, so system calls should not be unduly	2281	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should
1948	interrupted. If you have a problem with system calls getting interrupted by	2282	not be unduly interrupted. If you have a problem with system calls getting
1949	signals you can block all signals in an C<ev_check> watcher and unblock	2283	interrupted by signals you can block all signals in an C<ev_check> watcher
1950	them in an C<ev_prepare> watcher.	2284	and unblock them in an C<ev_prepare> watcher.
		2285
		2286	=head3 The special problem of inheritance over fork/execve/pthread_create
		2287
		2288	Both the signal mask (C<sigprocmask>) and the signal disposition
		2289	(C<sigaction>) are unspecified after starting a signal watcher (and after
		2290	stopping it again), that is, libev might or might not block the signal,
		2291	and might or might not set or restore the installed signal handler.
		2292
		2293	While this does not matter for the signal disposition (libev never
		2294	sets signals to C<SIG_IGN>, so handlers will be reset to C<SIG_DFL> on
		2295	C<execve>), this matters for the signal mask: many programs do not expect
		2296	certain signals to be blocked.
		2297
		2298	This means that before calling C<exec> (from the child) you should reset
		2299	the signal mask to whatever "default" you expect (all clear is a good
		2300	choice usually).
		2301
		2302	The simplest way to ensure that the signal mask is reset in the child is
		2303	to install a fork handler with C<pthread_atfork> that resets it. That will
		2304	catch fork calls done by libraries (such as the libc) as well.
		2305
		2306	In current versions of libev, the signal will not be blocked indefinitely
		2307	unless you use the C<signalfd> API (C<EV_SIGNALFD>). While this reduces
		2308	the window of opportunity for problems, it will not go away, as libev
		2309	I<has> to modify the signal mask, at least temporarily.
		2310
		2311	So I can't stress this enough: I<If you do not reset your signal mask when
		2312	you expect it to be empty, you have a race condition in your code>. This
		2313	is not a libev-specific thing, this is true for most event libraries.
1951		2314
1952	=head3 Watcher-Specific Functions and Data Members	2315	=head3 Watcher-Specific Functions and Data Members
1953		2316
1954	=over 4	2317	=over 4
1955		2318
…		…
1971	Example: Try to exit cleanly on SIGINT.	2334	Example: Try to exit cleanly on SIGINT.
1972		2335
1973	static void	2336	static void
1974	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)	2337	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)
1975	{	2338	{
1976	ev_unloop (loop, EVUNLOOP_ALL);	2339	ev_break (loop, EVBREAK_ALL);
1977	}	2340	}
1978		2341
1979	ev_signal signal_watcher;	2342	ev_signal signal_watcher;
1980	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	2343	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
1981	ev_signal_start (loop, &signal_watcher);	2344	ev_signal_start (loop, &signal_watcher);
…		…
1987	some child status changes (most typically when a child of yours dies or	2350	some child status changes (most typically when a child of yours dies or
1988	exits). It is permissible to install a child watcher I<after> the child	2351	exits). It is permissible to install a child watcher I<after> the child
1989	has been forked (which implies it might have already exited), as long	2352	has been forked (which implies it might have already exited), as long
1990	as the event loop isn't entered (or is continued from a watcher), i.e.,	2353	as the event loop isn't entered (or is continued from a watcher), i.e.,
1991	forking and then immediately registering a watcher for the child is fine,	2354	forking and then immediately registering a watcher for the child is fine,
1992	but forking and registering a watcher a few event loop iterations later is	2355	but forking and registering a watcher a few event loop iterations later or
1993	not.	2356	in the next callback invocation is not.
1994		2357
1995	Only the default event loop is capable of handling signals, and therefore	2358	Only the default event loop is capable of handling signals, and therefore
1996	you can only register child watchers in the default event loop.	2359	you can only register child watchers in the default event loop.
1997		2360
		2361	Due to some design glitches inside libev, child watchers will always be
		2362	handled at maximum priority (their priority is set to C<EV_MAXPRI> by
		2363	libev)
		2364
1998	=head3 Process Interaction	2365	=head3 Process Interaction
1999		2366
2000	Libev grabs C<SIGCHLD> as soon as the default event loop is	2367	Libev grabs C<SIGCHLD> as soon as the default event loop is
2001	initialised. This is necessary to guarantee proper behaviour even if	2368	initialised. This is necessary to guarantee proper behaviour even if the
2002	the first child watcher is started after the child exits. The occurrence	2369	first child watcher is started after the child exits. The occurrence
2003	of C<SIGCHLD> is recorded asynchronously, but child reaping is done	2370	of C<SIGCHLD> is recorded asynchronously, but child reaping is done
2004	synchronously as part of the event loop processing. Libev always reaps all	2371	synchronously as part of the event loop processing. Libev always reaps all
2005	children, even ones not watched.	2372	children, even ones not watched.
2006		2373
2007	=head3 Overriding the Built-In Processing	2374	=head3 Overriding the Built-In Processing
…		…
2017	=head3 Stopping the Child Watcher	2384	=head3 Stopping the Child Watcher
2018		2385
2019	Currently, the child watcher never gets stopped, even when the	2386	Currently, the child watcher never gets stopped, even when the
2020	child terminates, so normally one needs to stop the watcher in the	2387	child terminates, so normally one needs to stop the watcher in the
2021	callback. Future versions of libev might stop the watcher automatically	2388	callback. Future versions of libev might stop the watcher automatically
2022	when a child exit is detected.	2389	when a child exit is detected (calling C<ev_child_stop> twice is not a
		2390	problem).
2023		2391
2024	=head3 Watcher-Specific Functions and Data Members	2392	=head3 Watcher-Specific Functions and Data Members
2025		2393
2026	=over 4	2394	=over 4
2027		2395
…		…
2353	// no longer anything immediate to do.	2721	// no longer anything immediate to do.
2354	}	2722	}
2355		2723
2356	ev_idle *idle_watcher = malloc (sizeof (ev_idle));	2724	ev_idle *idle_watcher = malloc (sizeof (ev_idle));
2357	ev_idle_init (idle_watcher, idle_cb);	2725	ev_idle_init (idle_watcher, idle_cb);
2358	ev_idle_start (loop, idle_cb);	2726	ev_idle_start (loop, idle_watcher);
2359		2727
2360		2728
2361	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!	2729	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!
2362		2730
2363	Prepare and check watchers are usually (but not always) used in pairs:	2731	Prepare and check watchers are usually (but not always) used in pairs:
2364	prepare watchers get invoked before the process blocks and check watchers	2732	prepare watchers get invoked before the process blocks and check watchers
2365	afterwards.	2733	afterwards.
2366		2734
2367	You I<must not> call C<ev_loop> or similar functions that enter	2735	You I<must not> call C<ev_run> or similar functions that enter
2368	the current event loop from either C<ev_prepare> or C<ev_check>	2736	the current event loop from either C<ev_prepare> or C<ev_check>
2369	watchers. Other loops than the current one are fine, however. The	2737	watchers. Other loops than the current one are fine, however. The
2370	rationale behind this is that you do not need to check for recursion in	2738	rationale behind this is that you do not need to check for recursion in
2371	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,	2739	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,
2372	C<ev_check> so if you have one watcher of each kind they will always be	2740	C<ev_check> so if you have one watcher of each kind they will always be
…		…
2456	struct pollfd fds [nfd];	2824	struct pollfd fds [nfd];
2457	// actual code will need to loop here and realloc etc.	2825	// actual code will need to loop here and realloc etc.
2458	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));	2826	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
2459		2827
2460	/* the callback is illegal, but won't be called as we stop during check */	2828	/* the callback is illegal, but won't be called as we stop during check */
2461	ev_timer_init (&tw, 0, timeout * 1e-3);	2829	ev_timer_init (&tw, 0, timeout * 1e-3, 0.);
2462	ev_timer_start (loop, &tw);	2830	ev_timer_start (loop, &tw);
2463		2831
2464	// create one ev_io per pollfd	2832	// create one ev_io per pollfd
2465	for (int i = 0; i < nfd; ++i)	2833	for (int i = 0; i < nfd; ++i)
2466	{	2834	{
…		…
2540		2908
2541	if (timeout >= 0)	2909	if (timeout >= 0)
2542	// create/start timer	2910	// create/start timer
2543		2911
2544	// poll	2912	// poll
2545	ev_loop (EV_A_ 0);	2913	ev_run (EV_A_ 0);
2546		2914
2547	// stop timer again	2915	// stop timer again
2548	if (timeout >= 0)	2916	if (timeout >= 0)
2549	ev_timer_stop (EV_A_ &to);	2917	ev_timer_stop (EV_A_ &to);
2550		2918
…		…
2628	if you do not want that, you need to temporarily stop the embed watcher).	2996	if you do not want that, you need to temporarily stop the embed watcher).
2629		2997
2630	=item ev_embed_sweep (loop, ev_embed *)	2998	=item ev_embed_sweep (loop, ev_embed *)
2631		2999
2632	Make a single, non-blocking sweep over the embedded loop. This works	3000	Make a single, non-blocking sweep over the embedded loop. This works
2633	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	3001	similarly to C<ev_run (embedded_loop, EVRUN_NOWAIT)>, but in the most
2634	appropriate way for embedded loops.	3002	appropriate way for embedded loops.
2635		3003
2636	=item struct ev_loop *other [read-only]	3004	=item struct ev_loop *other [read-only]
2637		3005
2638	The embedded event loop.	3006	The embedded event loop.
…		…
2696	event loop blocks next and before C<ev_check> watchers are being called,	3064	event loop blocks next and before C<ev_check> watchers are being called,
2697	and only in the child after the fork. If whoever good citizen calling	3065	and only in the child after the fork. If whoever good citizen calling
2698	C<ev_default_fork> cheats and calls it in the wrong process, the fork	3066	C<ev_default_fork> cheats and calls it in the wrong process, the fork
2699	handlers will be invoked, too, of course.	3067	handlers will be invoked, too, of course.
2700		3068
		3069	=head3 The special problem of life after fork - how is it possible?
		3070
		3071	Most uses of C<fork()> consist of forking, then some simple calls to set
		3072	up/change the process environment, followed by a call to C<exec()>. This
		3073	sequence should be handled by libev without any problems.
		3074
		3075	This changes when the application actually wants to do event handling
		3076	in the child, or both parent in child, in effect "continuing" after the
		3077	fork.
		3078
		3079	The default mode of operation (for libev, with application help to detect
		3080	forks) is to duplicate all the state in the child, as would be expected
		3081	when I<either> the parent I<or> the child process continues.
		3082
		3083	When both processes want to continue using libev, then this is usually the
		3084	wrong result. In that case, usually one process (typically the parent) is
		3085	supposed to continue with all watchers in place as before, while the other
		3086	process typically wants to start fresh, i.e. without any active watchers.
		3087
		3088	The cleanest and most efficient way to achieve that with libev is to
		3089	simply create a new event loop, which of course will be "empty", and
		3090	use that for new watchers. This has the advantage of not touching more
		3091	memory than necessary, and thus avoiding the copy-on-write, and the
		3092	disadvantage of having to use multiple event loops (which do not support
		3093	signal watchers).
		3094
		3095	When this is not possible, or you want to use the default loop for
		3096	other reasons, then in the process that wants to start "fresh", call
		3097	C<ev_loop_destroy (EV_DEFAULT)> followed by C<ev_default_loop (...)>.
		3098	Destroying the default loop will "orphan" (not stop) all registered
		3099	watchers, so you have to be careful not to execute code that modifies
		3100	those watchers. Note also that in that case, you have to re-register any
		3101	signal watchers.
		3102
2701	=head3 Watcher-Specific Functions and Data Members	3103	=head3 Watcher-Specific Functions and Data Members
2702		3104
2703	=over 4	3105	=over 4
2704		3106
2705	=item ev_fork_init (ev_signal *, callback)	3107	=item ev_fork_init (ev_fork *, callback)
2706		3108
2707	Initialises and configures the fork watcher - it has no parameters of any	3109	Initialises and configures the fork watcher - it has no parameters of any
2708	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	3110	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
2709	believe me.	3111	really.
2710		3112
2711	=back	3113	=back
2712		3114
2713		3115
		3116	=head2 C<ev_cleanup> - even the best things end
		3117
		3118	Cleanup watchers are called just before the event loop is being destroyed
		3119	by a call to C<ev_loop_destroy>.
		3120
		3121	While there is no guarantee that the event loop gets destroyed, cleanup
		3122	watchers provide a convenient method to install cleanup hooks for your
		3123	program, worker threads and so on - you just to make sure to destroy the
		3124	loop when you want them to be invoked.
		3125
		3126	Cleanup watchers are invoked in the same way as any other watcher. Unlike
		3127	all other watchers, they do not keep a reference to the event loop (which
		3128	makes a lot of sense if you think about it). Like all other watchers, you
		3129	can call libev functions in the callback, except C<ev_cleanup_start>.
		3130
		3131	=head3 Watcher-Specific Functions and Data Members
		3132
		3133	=over 4
		3134
		3135	=item ev_cleanup_init (ev_cleanup *, callback)
		3136
		3137	Initialises and configures the cleanup watcher - it has no parameters of
		3138	any kind. There is a C<ev_cleanup_set> macro, but using it is utterly
		3139	pointless, I assure you.
		3140
		3141	=back
		3142
		3143	Example: Register an atexit handler to destroy the default loop, so any
		3144	cleanup functions are called.
		3145
		3146	static void
		3147	program_exits (void)
		3148	{
		3149	ev_loop_destroy (EV_DEFAULT_UC);
		3150	}
		3151
		3152	...
		3153	atexit (program_exits);
		3154
		3155
2714	=head2 C<ev_async> - how to wake up another event loop	3156	=head2 C<ev_async> - how to wake up an event loop
2715		3157
2716	In general, you cannot use an C<ev_loop> from multiple threads or other	3158	In general, you cannot use an C<ev_run> from multiple threads or other
2717	asynchronous sources such as signal handlers (as opposed to multiple event	3159	asynchronous sources such as signal handlers (as opposed to multiple event
2718	loops - those are of course safe to use in different threads).	3160	loops - those are of course safe to use in different threads).
2719		3161
2720	Sometimes, however, you need to wake up another event loop you do not	3162	Sometimes, however, you need to wake up an event loop you do not control,
2721	control, for example because it belongs to another thread. This is what	3163	for example because it belongs to another thread. This is what C<ev_async>
2722	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you	3164	watchers do: as long as the C<ev_async> watcher is active, you can signal
2723	can signal it by calling C<ev_async_send>, which is thread- and signal	3165	it by calling C<ev_async_send>, which is thread- and signal safe.
2724	safe.
2725		3166
2726	This functionality is very similar to C<ev_signal> watchers, as signals,	3167	This functionality is very similar to C<ev_signal> watchers, as signals,
2727	too, are asynchronous in nature, and signals, too, will be compressed	3168	too, are asynchronous in nature, and signals, too, will be compressed
2728	(i.e. the number of callback invocations may be less than the number of	3169	(i.e. the number of callback invocations may be less than the number of
2729	C<ev_async_sent> calls).	3170	C<ev_async_sent> calls).
…		…
2734	=head3 Queueing	3175	=head3 Queueing
2735		3176
2736	C<ev_async> does not support queueing of data in any way. The reason	3177	C<ev_async> does not support queueing of data in any way. The reason
2737	is that the author does not know of a simple (or any) algorithm for a	3178	is that the author does not know of a simple (or any) algorithm for a
2738	multiple-writer-single-reader queue that works in all cases and doesn't	3179	multiple-writer-single-reader queue that works in all cases and doesn't
2739	need elaborate support such as pthreads.	3180	need elaborate support such as pthreads or unportable memory access
		3181	semantics.
2740		3182
2741	That means that if you want to queue data, you have to provide your own	3183	That means that if you want to queue data, you have to provide your own
2742	queue. But at least I can tell you how to implement locking around your	3184	queue. But at least I can tell you how to implement locking around your
2743	queue:	3185	queue:
2744		3186
…		…
2883		3325
2884	If C<timeout> is less than 0, then no timeout watcher will be	3326	If C<timeout> is less than 0, then no timeout watcher will be
2885	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and	3327	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
2886	repeat = 0) will be started. C<0> is a valid timeout.	3328	repeat = 0) will be started. C<0> is a valid timeout.
2887		3329
2888	The callback has the type C<void (*cb)(int revents, void *arg)> and gets	3330	The callback has the type C<void (*cb)(int revents, void *arg)> and is
2889	passed an C<revents> set like normal event callbacks (a combination of	3331	passed an C<revents> set like normal event callbacks (a combination of
2890	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>	3332	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMER>) and the C<arg>
2891	value passed to C<ev_once>. Note that it is possible to receive I<both>	3333	value passed to C<ev_once>. Note that it is possible to receive I<both>
2892	a timeout and an io event at the same time - you probably should give io	3334	a timeout and an io event at the same time - you probably should give io
2893	events precedence.	3335	events precedence.
2894		3336
2895	Example: wait up to ten seconds for data to appear on STDIN_FILENO.	3337	Example: wait up to ten seconds for data to appear on STDIN_FILENO.
2896		3338
2897	static void stdin_ready (int revents, void *arg)	3339	static void stdin_ready (int revents, void *arg)
2898	{	3340	{
2899	if (revents & EV_READ)	3341	if (revents & EV_READ)
2900	/* stdin might have data for us, joy! */;	3342	/* stdin might have data for us, joy! */;
2901	else if (revents & EV_TIMEOUT)	3343	else if (revents & EV_TIMER)
2902	/* doh, nothing entered */;	3344	/* doh, nothing entered */;
2903	}	3345	}
2904		3346
2905	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	3347	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
2906		3348
2907	=item ev_feed_event (struct ev_loop *, watcher *, int revents)
2908
2909	Feeds the given event set into the event loop, as if the specified event
2910	had happened for the specified watcher (which must be a pointer to an
2911	initialised but not necessarily started event watcher).
2912
2913	=item ev_feed_fd_event (struct ev_loop *, int fd, int revents)	3349	=item ev_feed_fd_event (loop, int fd, int revents)
2914		3350
2915	Feed an event on the given fd, as if a file descriptor backend detected	3351	Feed an event on the given fd, as if a file descriptor backend detected
2916	the given events it.	3352	the given events it.
2917		3353
2918	=item ev_feed_signal_event (struct ev_loop *loop, int signum)	3354	=item ev_feed_signal_event (loop, int signum)
2919		3355
2920	Feed an event as if the given signal occurred (C<loop> must be the default	3356	Feed an event as if the given signal occurred (C<loop> must be the default
2921	loop!).	3357	loop!).
2922		3358
2923	=back	3359	=back
…		…
3003		3439
3004	=over 4	3440	=over 4
3005		3441
3006	=item ev::TYPE::TYPE ()	3442	=item ev::TYPE::TYPE ()
3007		3443
3008	=item ev::TYPE::TYPE (struct ev_loop *)	3444	=item ev::TYPE::TYPE (loop)
3009		3445
3010	=item ev::TYPE::~TYPE	3446	=item ev::TYPE::~TYPE
3011		3447
3012	The constructor (optionally) takes an event loop to associate the watcher	3448	The constructor (optionally) takes an event loop to associate the watcher
3013	with. If it is omitted, it will use C<EV_DEFAULT>.	3449	with. If it is omitted, it will use C<EV_DEFAULT>.
…		…
3046	myclass obj;	3482	myclass obj;
3047	ev::io iow;	3483	ev::io iow;
3048	iow.set <myclass, &myclass::io_cb> (&obj);	3484	iow.set <myclass, &myclass::io_cb> (&obj);
3049		3485
3050	=item w->set (object *)	3486	=item w->set (object *)
3051
3052	This is an B<experimental> feature that might go away in a future version.
3053		3487
3054	This is a variation of a method callback - leaving out the method to call	3488	This is a variation of a method callback - leaving out the method to call
3055	will default the method to C<operator ()>, which makes it possible to use	3489	will default the method to C<operator ()>, which makes it possible to use
3056	functor objects without having to manually specify the C<operator ()> all	3490	functor objects without having to manually specify the C<operator ()> all
3057	the time. Incidentally, you can then also leave out the template argument	3491	the time. Incidentally, you can then also leave out the template argument
…		…
3090	Example: Use a plain function as callback.	3524	Example: Use a plain function as callback.
3091		3525
3092	static void io_cb (ev::io &w, int revents) { }	3526	static void io_cb (ev::io &w, int revents) { }
3093	iow.set <io_cb> ();	3527	iow.set <io_cb> ();
3094		3528
3095	=item w->set (struct ev_loop *)	3529	=item w->set (loop)
3096		3530
3097	Associates a different C<struct ev_loop> with this watcher. You can only	3531	Associates a different C<struct ev_loop> with this watcher. You can only
3098	do this when the watcher is inactive (and not pending either).	3532	do this when the watcher is inactive (and not pending either).
3099		3533
3100	=item w->set ([arguments])	3534	=item w->set ([arguments])
3101		3535
3102	Basically the same as C<ev_TYPE_set>, with the same arguments. Must be	3536	Basically the same as C<ev_TYPE_set>, with the same arguments. Either this
3103	called at least once. Unlike the C counterpart, an active watcher gets	3537	method or a suitable start method must be called at least once. Unlike the
3104	automatically stopped and restarted when reconfiguring it with this	3538	C counterpart, an active watcher gets automatically stopped and restarted
3105	method.	3539	when reconfiguring it with this method.
3106		3540
3107	=item w->start ()	3541	=item w->start ()
3108		3542
3109	Starts the watcher. Note that there is no C<loop> argument, as the	3543	Starts the watcher. Note that there is no C<loop> argument, as the
3110	constructor already stores the event loop.	3544	constructor already stores the event loop.
3111		3545
		3546	=item w->start ([arguments])
		3547
		3548	Instead of calling C<set> and C<start> methods separately, it is often
		3549	convenient to wrap them in one call. Uses the same type of arguments as
		3550	the configure C<set> method of the watcher.
		3551
3112	=item w->stop ()	3552	=item w->stop ()
3113		3553
3114	Stops the watcher if it is active. Again, no C<loop> argument.	3554	Stops the watcher if it is active. Again, no C<loop> argument.
3115		3555
3116	=item w->again () (C<ev::timer>, C<ev::periodic> only)	3556	=item w->again () (C<ev::timer>, C<ev::periodic> only)
…		…
3128		3568
3129	=back	3569	=back
3130		3570
3131	=back	3571	=back
3132		3572
3133	Example: Define a class with an IO and idle watcher, start one of them in	3573	Example: Define a class with two I/O and idle watchers, start the I/O
3134	the constructor.	3574	watchers in the constructor.
3135		3575
3136	class myclass	3576	class myclass
3137	{	3577	{
3138	ev::io io ; void io_cb (ev::io &w, int revents);	3578	ev::io io ; void io_cb (ev::io &w, int revents);
		3579	ev::io2 io2 ; void io2_cb (ev::io &w, int revents);
3139	ev::idle idle; void idle_cb (ev::idle &w, int revents);	3580	ev::idle idle; void idle_cb (ev::idle &w, int revents);
3140		3581
3141	myclass (int fd)	3582	myclass (int fd)
3142	{	3583	{
3143	io .set <myclass, &myclass::io_cb > (this);	3584	io .set <myclass, &myclass::io_cb > (this);
		3585	io2 .set <myclass, &myclass::io2_cb > (this);
3144	idle.set <myclass, &myclass::idle_cb> (this);	3586	idle.set <myclass, &myclass::idle_cb> (this);
3145		3587
3146	io.start (fd, ev::READ);	3588	io.set (fd, ev::WRITE); // configure the watcher
		3589	io.start (); // start it whenever convenient
		3590
		3591	io2.start (fd, ev::READ); // set + start in one call
3147	}	3592	}
3148	};	3593	};
3149		3594
3150		3595
3151	=head1 OTHER LANGUAGE BINDINGS	3596	=head1 OTHER LANGUAGE BINDINGS
…		…
3197	=item Ocaml	3642	=item Ocaml
3198		3643
3199	Erkki Seppala has written Ocaml bindings for libev, to be found at	3644	Erkki Seppala has written Ocaml bindings for libev, to be found at
3200	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.	3645	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.
3201		3646
		3647	=item Lua
		3648
		3649	Brian Maher has written a partial interface to libev for lua (at the
		3650	time of this writing, only C<ev_io> and C<ev_timer>), to be found at
		3651	L<http://github.com/brimworks/lua-ev>.
		3652
3202	=back	3653	=back
3203		3654
3204		3655
3205	=head1 MACRO MAGIC	3656	=head1 MACRO MAGIC
3206		3657
…		…
3219	loop argument"). The C<EV_A> form is used when this is the sole argument,	3670	loop argument"). The C<EV_A> form is used when this is the sole argument,
3220	C<EV_A_> is used when other arguments are following. Example:	3671	C<EV_A_> is used when other arguments are following. Example:
3221		3672
3222	ev_unref (EV_A);	3673	ev_unref (EV_A);
3223	ev_timer_add (EV_A_ watcher);	3674	ev_timer_add (EV_A_ watcher);
3224	ev_loop (EV_A_ 0);	3675	ev_run (EV_A_ 0);
3225		3676
3226	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,	3677	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
3227	which is often provided by the following macro.	3678	which is often provided by the following macro.
3228		3679
3229	=item C<EV_P>, C<EV_P_>	3680	=item C<EV_P>, C<EV_P_>
…		…
3269	}	3720	}
3270		3721
3271	ev_check check;	3722	ev_check check;
3272	ev_check_init (&check, check_cb);	3723	ev_check_init (&check, check_cb);
3273	ev_check_start (EV_DEFAULT_ &check);	3724	ev_check_start (EV_DEFAULT_ &check);
3274	ev_loop (EV_DEFAULT_ 0);	3725	ev_run (EV_DEFAULT_ 0);
3275		3726
3276	=head1 EMBEDDING	3727	=head1 EMBEDDING
3277		3728
3278	Libev can (and often is) directly embedded into host	3729	Libev can (and often is) directly embedded into host
3279	applications. Examples of applications that embed it include the Deliantra	3730	applications. Examples of applications that embed it include the Deliantra
…		…
3359	libev.m4	3810	libev.m4
3360		3811
3361	=head2 PREPROCESSOR SYMBOLS/MACROS	3812	=head2 PREPROCESSOR SYMBOLS/MACROS
3362		3813
3363	Libev can be configured via a variety of preprocessor symbols you have to	3814	Libev can be configured via a variety of preprocessor symbols you have to
3364	define before including any of its files. The default in the absence of	3815	define before including (or compiling) any of its files. The default in
3365	autoconf is documented for every option.	3816	the absence of autoconf is documented for every option.
		3817
		3818	Symbols marked with "(h)" do not change the ABI, and can have different
		3819	values when compiling libev vs. including F<ev.h>, so it is permissible
		3820	to redefine them before including F<ev.h> without breaking compatibility
		3821	to a compiled library. All other symbols change the ABI, which means all
		3822	users of libev and the libev code itself must be compiled with compatible
		3823	settings.
3366		3824
3367	=over 4	3825	=over 4
3368		3826
		3827	=item EV_COMPAT3 (h)
		3828
		3829	Backwards compatibility is a major concern for libev. This is why this
		3830	release of libev comes with wrappers for the functions and symbols that
		3831	have been renamed between libev version 3 and 4.
		3832
		3833	You can disable these wrappers (to test compatibility with future
		3834	versions) by defining C<EV_COMPAT3> to C<0> when compiling your
		3835	sources. This has the additional advantage that you can drop the C<struct>
		3836	from C<struct ev_loop> declarations, as libev will provide an C<ev_loop>
		3837	typedef in that case.
		3838
		3839	In some future version, the default for C<EV_COMPAT3> will become C<0>,
		3840	and in some even more future version the compatibility code will be
		3841	removed completely.
		3842
3369	=item EV_STANDALONE	3843	=item EV_STANDALONE (h)
3370		3844
3371	Must always be C<1> if you do not use autoconf configuration, which	3845	Must always be C<1> if you do not use autoconf configuration, which
3372	keeps libev from including F<config.h>, and it also defines dummy	3846	keeps libev from including F<config.h>, and it also defines dummy
3373	implementations for some libevent functions (such as logging, which is not	3847	implementations for some libevent functions (such as logging, which is not
3374	supported). It will also not define any of the structs usually found in	3848	supported). It will also not define any of the structs usually found in
3375	F<event.h> that are not directly supported by the libev core alone.	3849	F<event.h> that are not directly supported by the libev core alone.
3376		3850
3377	In stanbdalone mode, libev will still try to automatically deduce the	3851	In standalone mode, libev will still try to automatically deduce the
3378	configuration, but has to be more conservative.	3852	configuration, but has to be more conservative.
3379		3853
3380	=item EV_USE_MONOTONIC	3854	=item EV_USE_MONOTONIC
3381		3855
3382	If defined to be C<1>, libev will try to detect the availability of the	3856	If defined to be C<1>, libev will try to detect the availability of the
…		…
3447	be used is the winsock select). This means that it will call	3921	be used is the winsock select). This means that it will call
3448	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	3922	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
3449	it is assumed that all these functions actually work on fds, even	3923	it is assumed that all these functions actually work on fds, even
3450	on win32. Should not be defined on non-win32 platforms.	3924	on win32. Should not be defined on non-win32 platforms.
3451		3925
3452	=item EV_FD_TO_WIN32_HANDLE	3926	=item EV_FD_TO_WIN32_HANDLE(fd)
3453		3927
3454	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map	3928	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
3455	file descriptors to socket handles. When not defining this symbol (the	3929	file descriptors to socket handles. When not defining this symbol (the
3456	default), then libev will call C<_get_osfhandle>, which is usually	3930	default), then libev will call C<_get_osfhandle>, which is usually
3457	correct. In some cases, programs use their own file descriptor management,	3931	correct. In some cases, programs use their own file descriptor management,
3458	in which case they can provide this function to map fds to socket handles.	3932	in which case they can provide this function to map fds to socket handles.
		3933
		3934	=item EV_WIN32_HANDLE_TO_FD(handle)
		3935
		3936	If C<EV_SELECT_IS_WINSOCKET> then libev maps handles to file descriptors
		3937	using the standard C<_open_osfhandle> function. For programs implementing
		3938	their own fd to handle mapping, overwriting this function makes it easier
		3939	to do so. This can be done by defining this macro to an appropriate value.
		3940
		3941	=item EV_WIN32_CLOSE_FD(fd)
		3942
		3943	If programs implement their own fd to handle mapping on win32, then this
		3944	macro can be used to override the C<close> function, useful to unregister
		3945	file descriptors again. Note that the replacement function has to close
		3946	the underlying OS handle.
3459		3947
3460	=item EV_USE_POLL	3948	=item EV_USE_POLL
3461		3949
3462	If defined to be C<1>, libev will compile in support for the C<poll>(2)	3950	If defined to be C<1>, libev will compile in support for the C<poll>(2)
3463	backend. Otherwise it will be enabled on non-win32 platforms. It	3951	backend. Otherwise it will be enabled on non-win32 platforms. It
…		…
3510	as well as for signal and thread safety in C<ev_async> watchers.	3998	as well as for signal and thread safety in C<ev_async> watchers.
3511		3999
3512	In the absence of this define, libev will use C<sig_atomic_t volatile>	4000	In the absence of this define, libev will use C<sig_atomic_t volatile>
3513	(from F<signal.h>), which is usually good enough on most platforms.	4001	(from F<signal.h>), which is usually good enough on most platforms.
3514		4002
3515	=item EV_H	4003	=item EV_H (h)
3516		4004
3517	The name of the F<ev.h> header file used to include it. The default if	4005	The name of the F<ev.h> header file used to include it. The default if
3518	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be	4006	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
3519	used to virtually rename the F<ev.h> header file in case of conflicts.	4007	used to virtually rename the F<ev.h> header file in case of conflicts.
3520		4008
3521	=item EV_CONFIG_H	4009	=item EV_CONFIG_H (h)
3522		4010
3523	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	4011	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
3524	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	4012	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
3525	C<EV_H>, above.	4013	C<EV_H>, above.
3526		4014
3527	=item EV_EVENT_H	4015	=item EV_EVENT_H (h)
3528		4016
3529	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	4017	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
3530	of how the F<event.h> header can be found, the default is C<"event.h">.	4018	of how the F<event.h> header can be found, the default is C<"event.h">.
3531		4019
3532	=item EV_PROTOTYPES	4020	=item EV_PROTOTYPES (h)
3533		4021
3534	If defined to be C<0>, then F<ev.h> will not define any function	4022	If defined to be C<0>, then F<ev.h> will not define any function
3535	prototypes, but still define all the structs and other symbols. This is	4023	prototypes, but still define all the structs and other symbols. This is
3536	occasionally useful if you want to provide your own wrapper functions	4024	occasionally useful if you want to provide your own wrapper functions
3537	around libev functions.	4025	around libev functions.
…		…
3559	fine.	4047	fine.
3560		4048
3561	If your embedding application does not need any priorities, defining these	4049	If your embedding application does not need any priorities, defining these
3562	both to C<0> will save some memory and CPU.	4050	both to C<0> will save some memory and CPU.
3563		4051
3564	=item EV_PERIODIC_ENABLE	4052	=item EV_PERIODIC_ENABLE, EV_IDLE_ENABLE, EV_EMBED_ENABLE, EV_STAT_ENABLE,
		4053	EV_PREPARE_ENABLE, EV_CHECK_ENABLE, EV_FORK_ENABLE, EV_SIGNAL_ENABLE,
		4054	EV_ASYNC_ENABLE, EV_CHILD_ENABLE.
3565		4055
3566	If undefined or defined to be C<1>, then periodic timers are supported. If	4056	If undefined or defined to be C<1> (and the platform supports it), then
3567	defined to be C<0>, then they are not. Disabling them saves a few kB of	4057	the respective watcher type is supported. If defined to be C<0>, then it
3568	code.	4058	is not. Disabling watcher types mainly saves code size.
3569		4059
3570	=item EV_IDLE_ENABLE	4060	=item EV_FEATURES
3571
3572	If undefined or defined to be C<1>, then idle watchers are supported. If
3573	defined to be C<0>, then they are not. Disabling them saves a few kB of
3574	code.
3575
3576	=item EV_EMBED_ENABLE
3577
3578	If undefined or defined to be C<1>, then embed watchers are supported. If
3579	defined to be C<0>, then they are not. Embed watchers rely on most other
3580	watcher types, which therefore must not be disabled.
3581
3582	=item EV_STAT_ENABLE
3583
3584	If undefined or defined to be C<1>, then stat watchers are supported. If
3585	defined to be C<0>, then they are not.
3586
3587	=item EV_FORK_ENABLE
3588
3589	If undefined or defined to be C<1>, then fork watchers are supported. If
3590	defined to be C<0>, then they are not.
3591
3592	=item EV_ASYNC_ENABLE
3593
3594	If undefined or defined to be C<1>, then async watchers are supported. If
3595	defined to be C<0>, then they are not.
3596
3597	=item EV_MINIMAL
3598		4061
3599	If you need to shave off some kilobytes of code at the expense of some	4062	If you need to shave off some kilobytes of code at the expense of some
3600	speed, define this symbol to C<1>. Currently this is used to override some	4063	speed (but with the full API), you can define this symbol to request
3601	inlining decisions, saves roughly 30% code size on amd64. It also selects a	4064	certain subsets of functionality. The default is to enable all features
3602	much smaller 2-heap for timer management over the default 4-heap.	4065	that can be enabled on the platform.
		4066
		4067	A typical way to use this symbol is to define it to C<0> (or to a bitset
		4068	with some broad features you want) and then selectively re-enable
		4069	additional parts you want, for example if you want everything minimal,
		4070	but multiple event loop support, async and child watchers and the poll
		4071	backend, use this:
		4072
		4073	#define EV_FEATURES 0
		4074	#define EV_MULTIPLICITY 1
		4075	#define EV_USE_POLL 1
		4076	#define EV_CHILD_ENABLE 1
		4077	#define EV_ASYNC_ENABLE 1
		4078
		4079	The actual value is a bitset, it can be a combination of the following
		4080	values:
		4081
		4082	=over 4
		4083
		4084	=item C<1> - faster/larger code
		4085
		4086	Use larger code to speed up some operations.
		4087
		4088	Currently this is used to override some inlining decisions (enlarging the
		4089	code size by roughly 30% on amd64).
		4090
		4091	When optimising for size, use of compiler flags such as C<-Os> with
		4092	gcc is recommended, as well as C<-DNDEBUG>, as libev contains a number of
		4093	assertions.
		4094
		4095	=item C<2> - faster/larger data structures
		4096
		4097	Replaces the small 2-heap for timer management by a faster 4-heap, larger
		4098	hash table sizes and so on. This will usually further increase code size
		4099	and can additionally have an effect on the size of data structures at
		4100	runtime.
		4101
		4102	=item C<4> - full API configuration
		4103
		4104	This enables priorities (sets C<EV_MAXPRI>=2 and C<EV_MINPRI>=-2), and
		4105	enables multiplicity (C<EV_MULTIPLICITY>=1).
		4106
		4107	=item C<8> - full API
		4108
		4109	This enables a lot of the "lesser used" API functions. See C<ev.h> for
		4110	details on which parts of the API are still available without this
		4111	feature, and do not complain if this subset changes over time.
		4112
		4113	=item C<16> - enable all optional watcher types
		4114
		4115	Enables all optional watcher types. If you want to selectively enable
		4116	only some watcher types other than I/O and timers (e.g. prepare,
		4117	embed, async, child...) you can enable them manually by defining
		4118	C<EV_watchertype_ENABLE> to C<1> instead.
		4119
		4120	=item C<32> - enable all backends
		4121
		4122	This enables all backends - without this feature, you need to enable at
		4123	least one backend manually (C<EV_USE_SELECT> is a good choice).
		4124
		4125	=item C<64> - enable OS-specific "helper" APIs
		4126
		4127	Enable inotify, eventfd, signalfd and similar OS-specific helper APIs by
		4128	default.
		4129
		4130	=back
		4131
		4132	Compiling with C<gcc -Os -DEV_STANDALONE -DEV_USE_EPOLL=1 -DEV_FEATURES=0>
		4133	reduces the compiled size of libev from 24.7Kb code/2.8Kb data to 6.5Kb
		4134	code/0.3Kb data on my GNU/Linux amd64 system, while still giving you I/O
		4135	watchers, timers and monotonic clock support.
		4136
		4137	With an intelligent-enough linker (gcc+binutils are intelligent enough
		4138	when you use C<-Wl,--gc-sections -ffunction-sections>) functions unused by
		4139	your program might be left out as well - a binary starting a timer and an
		4140	I/O watcher then might come out at only 5Kb.
		4141
		4142	=item EV_AVOID_STDIO
		4143
		4144	If this is set to C<1> at compiletime, then libev will avoid using stdio
		4145	functions (printf, scanf, perror etc.). This will increase the code size
		4146	somewhat, but if your program doesn't otherwise depend on stdio and your
		4147	libc allows it, this avoids linking in the stdio library which is quite
		4148	big.
		4149
		4150	Note that error messages might become less precise when this option is
		4151	enabled.
		4152
		4153	=item EV_NSIG
		4154
		4155	The highest supported signal number, +1 (or, the number of
		4156	signals): Normally, libev tries to deduce the maximum number of signals
		4157	automatically, but sometimes this fails, in which case it can be
		4158	specified. Also, using a lower number than detected (C<32> should be
		4159	good for about any system in existence) can save some memory, as libev
		4160	statically allocates some 12-24 bytes per signal number.
3603		4161
3604	=item EV_PID_HASHSIZE	4162	=item EV_PID_HASHSIZE
3605		4163
3606	C<ev_child> watchers use a small hash table to distribute workload by	4164	C<ev_child> watchers use a small hash table to distribute workload by
3607	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	4165	pid. The default size is C<16> (or C<1> with C<EV_FEATURES> disabled),
3608	than enough. If you need to manage thousands of children you might want to	4166	usually more than enough. If you need to manage thousands of children you
3609	increase this value (I<must> be a power of two).	4167	might want to increase this value (I<must> be a power of two).
3610		4168
3611	=item EV_INOTIFY_HASHSIZE	4169	=item EV_INOTIFY_HASHSIZE
3612		4170
3613	C<ev_stat> watchers use a small hash table to distribute workload by	4171	C<ev_stat> watchers use a small hash table to distribute workload by
3614	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	4172	inotify watch id. The default size is C<16> (or C<1> with C<EV_FEATURES>
3615	usually more than enough. If you need to manage thousands of C<ev_stat>	4173	disabled), usually more than enough. If you need to manage thousands of
3616	watchers you might want to increase this value (I<must> be a power of	4174	C<ev_stat> watchers you might want to increase this value (I<must> be a
3617	two).	4175	power of two).
3618		4176
3619	=item EV_USE_4HEAP	4177	=item EV_USE_4HEAP
3620		4178
3621	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4179	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3622	timer and periodics heaps, libev uses a 4-heap when this symbol is defined	4180	timer and periodics heaps, libev uses a 4-heap when this symbol is defined
3623	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably	4181	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably
3624	faster performance with many (thousands) of watchers.	4182	faster performance with many (thousands) of watchers.
3625		4183
3626	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4184	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3627	(disabled).	4185	will be C<0>.
3628		4186
3629	=item EV_HEAP_CACHE_AT	4187	=item EV_HEAP_CACHE_AT
3630		4188
3631	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4189	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3632	timer and periodics heaps, libev can cache the timestamp (I<at>) within	4190	timer and periodics heaps, libev can cache the timestamp (I<at>) within
3633	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),	4191	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
3634	which uses 8-12 bytes more per watcher and a few hundred bytes more code,	4192	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
3635	but avoids random read accesses on heap changes. This improves performance	4193	but avoids random read accesses on heap changes. This improves performance
3636	noticeably with many (hundreds) of watchers.	4194	noticeably with many (hundreds) of watchers.
3637		4195
3638	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4196	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3639	(disabled).	4197	will be C<0>.
3640		4198
3641	=item EV_VERIFY	4199	=item EV_VERIFY
3642		4200
3643	Controls how much internal verification (see C<ev_loop_verify ()>) will	4201	Controls how much internal verification (see C<ev_verify ()>) will
3644	be done: If set to C<0>, no internal verification code will be compiled	4202	be done: If set to C<0>, no internal verification code will be compiled
3645	in. If set to C<1>, then verification code will be compiled in, but not	4203	in. If set to C<1>, then verification code will be compiled in, but not
3646	called. If set to C<2>, then the internal verification code will be	4204	called. If set to C<2>, then the internal verification code will be
3647	called once per loop, which can slow down libev. If set to C<3>, then the	4205	called once per loop, which can slow down libev. If set to C<3>, then the
3648	verification code will be called very frequently, which will slow down	4206	verification code will be called very frequently, which will slow down
3649	libev considerably.	4207	libev considerably.
3650		4208
3651	The default is C<1>, unless C<EV_MINIMAL> is set, in which case it will be	4209	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3652	C<0>.	4210	will be C<0>.
3653		4211
3654	=item EV_COMMON	4212	=item EV_COMMON
3655		4213
3656	By default, all watchers have a C<void *data> member. By redefining	4214	By default, all watchers have a C<void *data> member. By redefining
3657	this macro to a something else you can include more and other types of	4215	this macro to something else you can include more and other types of
3658	members. You have to define it each time you include one of the files,	4216	members. You have to define it each time you include one of the files,
3659	though, and it must be identical each time.	4217	though, and it must be identical each time.
3660		4218
3661	For example, the perl EV module uses something like this:	4219	For example, the perl EV module uses something like this:
3662		4220
…		…
3715	file.	4273	file.
3716		4274
3717	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	4275	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
3718	that everybody includes and which overrides some configure choices:	4276	that everybody includes and which overrides some configure choices:
3719		4277
3720	#define EV_MINIMAL 1	4278	#define EV_FEATURES 8
3721	#define EV_USE_POLL 0	4279	#define EV_USE_SELECT 1
3722	#define EV_MULTIPLICITY 0
3723	#define EV_PERIODIC_ENABLE 0	4280	#define EV_PREPARE_ENABLE 1
		4281	#define EV_IDLE_ENABLE 1
3724	#define EV_STAT_ENABLE 0	4282	#define EV_SIGNAL_ENABLE 1
3725	#define EV_FORK_ENABLE 0	4283	#define EV_CHILD_ENABLE 1
		4284	#define EV_USE_STDEXCEPT 0
3726	#define EV_CONFIG_H <config.h>	4285	#define EV_CONFIG_H <config.h>
3727	#define EV_MINPRI 0
3728	#define EV_MAXPRI 0
3729		4286
3730	#include "ev++.h"	4287	#include "ev++.h"
3731		4288
3732	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	4289	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
3733		4290
…		…
3793	default loop and triggering an C<ev_async> watcher from the default loop	4350	default loop and triggering an C<ev_async> watcher from the default loop
3794	watcher callback into the event loop interested in the signal.	4351	watcher callback into the event loop interested in the signal.
3795		4352
3796	=back	4353	=back
3797		4354
		4355	=head4 THREAD LOCKING EXAMPLE
		4356
		4357	Here is a fictitious example of how to run an event loop in a different
		4358	thread than where callbacks are being invoked and watchers are
		4359	created/added/removed.
		4360
		4361	For a real-world example, see the C<EV::Loop::Async> perl module,
		4362	which uses exactly this technique (which is suited for many high-level
		4363	languages).
		4364
		4365	The example uses a pthread mutex to protect the loop data, a condition
		4366	variable to wait for callback invocations, an async watcher to notify the
		4367	event loop thread and an unspecified mechanism to wake up the main thread.
		4368
		4369	First, you need to associate some data with the event loop:
		4370
		4371	typedef struct {
		4372	mutex_t lock; /* global loop lock */
		4373	ev_async async_w;
		4374	thread_t tid;
		4375	cond_t invoke_cv;
		4376	} userdata;
		4377
		4378	void prepare_loop (EV_P)
		4379	{
		4380	// for simplicity, we use a static userdata struct.
		4381	static userdata u;
		4382
		4383	ev_async_init (&u->async_w, async_cb);
		4384	ev_async_start (EV_A_ &u->async_w);
		4385
		4386	pthread_mutex_init (&u->lock, 0);
		4387	pthread_cond_init (&u->invoke_cv, 0);
		4388
		4389	// now associate this with the loop
		4390	ev_set_userdata (EV_A_ u);
		4391	ev_set_invoke_pending_cb (EV_A_ l_invoke);
		4392	ev_set_loop_release_cb (EV_A_ l_release, l_acquire);
		4393
		4394	// then create the thread running ev_loop
		4395	pthread_create (&u->tid, 0, l_run, EV_A);
		4396	}
		4397
		4398	The callback for the C<ev_async> watcher does nothing: the watcher is used
		4399	solely to wake up the event loop so it takes notice of any new watchers
		4400	that might have been added:
		4401
		4402	static void
		4403	async_cb (EV_P_ ev_async *w, int revents)
		4404	{
		4405	// just used for the side effects
		4406	}
		4407
		4408	The C<l_release> and C<l_acquire> callbacks simply unlock/lock the mutex
		4409	protecting the loop data, respectively.
		4410
		4411	static void
		4412	l_release (EV_P)
		4413	{
		4414	userdata *u = ev_userdata (EV_A);
		4415	pthread_mutex_unlock (&u->lock);
		4416	}
		4417
		4418	static void
		4419	l_acquire (EV_P)
		4420	{
		4421	userdata *u = ev_userdata (EV_A);
		4422	pthread_mutex_lock (&u->lock);
		4423	}
		4424
		4425	The event loop thread first acquires the mutex, and then jumps straight
		4426	into C<ev_run>:
		4427
		4428	void *
		4429	l_run (void *thr_arg)
		4430	{
		4431	struct ev_loop *loop = (struct ev_loop *)thr_arg;
		4432
		4433	l_acquire (EV_A);
		4434	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
		4435	ev_run (EV_A_ 0);
		4436	l_release (EV_A);
		4437
		4438	return 0;
		4439	}
		4440
		4441	Instead of invoking all pending watchers, the C<l_invoke> callback will
		4442	signal the main thread via some unspecified mechanism (signals? pipe
		4443	writes? C<Async::Interrupt>?) and then waits until all pending watchers
		4444	have been called (in a while loop because a) spurious wakeups are possible
		4445	and b) skipping inter-thread-communication when there are no pending
		4446	watchers is very beneficial):
		4447
		4448	static void
		4449	l_invoke (EV_P)
		4450	{
		4451	userdata *u = ev_userdata (EV_A);
		4452
		4453	while (ev_pending_count (EV_A))
		4454	{
		4455	wake_up_other_thread_in_some_magic_or_not_so_magic_way ();
		4456	pthread_cond_wait (&u->invoke_cv, &u->lock);
		4457	}
		4458	}
		4459
		4460	Now, whenever the main thread gets told to invoke pending watchers, it
		4461	will grab the lock, call C<ev_invoke_pending> and then signal the loop
		4462	thread to continue:
		4463
		4464	static void
		4465	real_invoke_pending (EV_P)
		4466	{
		4467	userdata *u = ev_userdata (EV_A);
		4468
		4469	pthread_mutex_lock (&u->lock);
		4470	ev_invoke_pending (EV_A);
		4471	pthread_cond_signal (&u->invoke_cv);
		4472	pthread_mutex_unlock (&u->lock);
		4473	}
		4474
		4475	Whenever you want to start/stop a watcher or do other modifications to an
		4476	event loop, you will now have to lock:
		4477
		4478	ev_timer timeout_watcher;
		4479	userdata *u = ev_userdata (EV_A);
		4480
		4481	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
		4482
		4483	pthread_mutex_lock (&u->lock);
		4484	ev_timer_start (EV_A_ &timeout_watcher);
		4485	ev_async_send (EV_A_ &u->async_w);
		4486	pthread_mutex_unlock (&u->lock);
		4487
		4488	Note that sending the C<ev_async> watcher is required because otherwise
		4489	an event loop currently blocking in the kernel will have no knowledge
		4490	about the newly added timer. By waking up the loop it will pick up any new
		4491	watchers in the next event loop iteration.
		4492
3798	=head3 COROUTINES	4493	=head3 COROUTINES
3799		4494
3800	Libev is very accommodating to coroutines ("cooperative threads"):	4495	Libev is very accommodating to coroutines ("cooperative threads"):
3801	libev fully supports nesting calls to its functions from different	4496	libev fully supports nesting calls to its functions from different
3802	coroutines (e.g. you can call C<ev_loop> on the same loop from two	4497	coroutines (e.g. you can call C<ev_run> on the same loop from two
3803	different coroutines, and switch freely between both coroutines running the	4498	different coroutines, and switch freely between both coroutines running
3804	loop, as long as you don't confuse yourself). The only exception is that	4499	the loop, as long as you don't confuse yourself). The only exception is
3805	you must not do this from C<ev_periodic> reschedule callbacks.	4500	that you must not do this from C<ev_periodic> reschedule callbacks.
3806		4501
3807	Care has been taken to ensure that libev does not keep local state inside	4502	Care has been taken to ensure that libev does not keep local state inside
3808	C<ev_loop>, and other calls do not usually allow for coroutine switches as	4503	C<ev_run>, and other calls do not usually allow for coroutine switches as
3809	they do not call any callbacks.	4504	they do not call any callbacks.
3810		4505
3811	=head2 COMPILER WARNINGS	4506	=head2 COMPILER WARNINGS
3812		4507
3813	Depending on your compiler and compiler settings, you might get no or a	4508	Depending on your compiler and compiler settings, you might get no or a
…		…
3824	maintainable.	4519	maintainable.
3825		4520
3826	And of course, some compiler warnings are just plain stupid, or simply	4521	And of course, some compiler warnings are just plain stupid, or simply
3827	wrong (because they don't actually warn about the condition their message	4522	wrong (because they don't actually warn about the condition their message
3828	seems to warn about). For example, certain older gcc versions had some	4523	seems to warn about). For example, certain older gcc versions had some
3829	warnings that resulted an extreme number of false positives. These have	4524	warnings that resulted in an extreme number of false positives. These have
3830	been fixed, but some people still insist on making code warn-free with	4525	been fixed, but some people still insist on making code warn-free with
3831	such buggy versions.	4526	such buggy versions.
3832		4527
3833	While libev is written to generate as few warnings as possible,	4528	While libev is written to generate as few warnings as possible,
3834	"warn-free" code is not a goal, and it is recommended not to build libev	4529	"warn-free" code is not a goal, and it is recommended not to build libev
…		…
3870	I suggest using suppression lists.	4565	I suggest using suppression lists.
3871		4566
3872		4567
3873	=head1 PORTABILITY NOTES	4568	=head1 PORTABILITY NOTES
3874		4569
		4570	=head2 GNU/LINUX 32 BIT LIMITATIONS
		4571
		4572	GNU/Linux is the only common platform that supports 64 bit file/large file
		4573	interfaces but I<disables> them by default.
		4574
		4575	That means that libev compiled in the default environment doesn't support
		4576	files larger than 2GiB or so, which mainly affects C<ev_stat> watchers.
		4577
		4578	Unfortunately, many programs try to work around this GNU/Linux issue
		4579	by enabling the large file API, which makes them incompatible with the
		4580	standard libev compiled for their system.
		4581
		4582	Likewise, libev cannot enable the large file API itself as this would
		4583	suddenly make it incompatible to the default compile time environment,
		4584	i.e. all programs not using special compile switches.
		4585
		4586	=head2 OS/X AND DARWIN BUGS
		4587
		4588	The whole thing is a bug if you ask me - basically any system interface
		4589	you touch is broken, whether it is locales, poll, kqueue or even the
		4590	OpenGL drivers.
		4591
		4592	=head3 C<kqueue> is buggy
		4593
		4594	The kqueue syscall is broken in all known versions - most versions support
		4595	only sockets, many support pipes.
		4596
		4597	Libev tries to work around this by not using C<kqueue> by default on this
		4598	rotten platform, but of course you can still ask for it when creating a
		4599	loop - embedding a socket-only kqueue loop into a select-based one is
		4600	probably going to work well.
		4601
		4602	=head3 C<poll> is buggy
		4603
		4604	Instead of fixing C<kqueue>, Apple replaced their (working) C<poll>
		4605	implementation by something calling C<kqueue> internally around the 10.5.6
		4606	release, so now C<kqueue> I<and> C<poll> are broken.
		4607
		4608	Libev tries to work around this by not using C<poll> by default on
		4609	this rotten platform, but of course you can still ask for it when creating
		4610	a loop.
		4611
		4612	=head3 C<select> is buggy
		4613
		4614	All that's left is C<select>, and of course Apple found a way to fuck this
		4615	one up as well: On OS/X, C<select> actively limits the number of file
		4616	descriptors you can pass in to 1024 - your program suddenly crashes when
		4617	you use more.
		4618
		4619	There is an undocumented "workaround" for this - defining
		4620	C<_DARWIN_UNLIMITED_SELECT>, which libev tries to use, so select I<should>
		4621	work on OS/X.
		4622
		4623	=head2 SOLARIS PROBLEMS AND WORKAROUNDS
		4624
		4625	=head3 C<errno> reentrancy
		4626
		4627	The default compile environment on Solaris is unfortunately so
		4628	thread-unsafe that you can't even use components/libraries compiled
		4629	without C<-D_REENTRANT> in a threaded program, which, of course, isn't
		4630	defined by default. A valid, if stupid, implementation choice.
		4631
		4632	If you want to use libev in threaded environments you have to make sure
		4633	it's compiled with C<_REENTRANT> defined.
		4634
		4635	=head3 Event port backend
		4636
		4637	The scalable event interface for Solaris is called "event
		4638	ports". Unfortunately, this mechanism is very buggy in all major
		4639	releases. If you run into high CPU usage, your program freezes or you get
		4640	a large number of spurious wakeups, make sure you have all the relevant
		4641	and latest kernel patches applied. No, I don't know which ones, but there
		4642	are multiple ones to apply, and afterwards, event ports actually work
		4643	great.
		4644
		4645	If you can't get it to work, you can try running the program by setting
		4646	the environment variable C<LIBEV_FLAGS=3> to only allow C<poll> and
		4647	C<select> backends.
		4648
		4649	=head2 AIX POLL BUG
		4650
		4651	AIX unfortunately has a broken C<poll.h> header. Libev works around
		4652	this by trying to avoid the poll backend altogether (i.e. it's not even
		4653	compiled in), which normally isn't a big problem as C<select> works fine
		4654	with large bitsets on AIX, and AIX is dead anyway.
		4655
3875	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS	4656	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
		4657
		4658	=head3 General issues
3876		4659
3877	Win32 doesn't support any of the standards (e.g. POSIX) that libev	4660	Win32 doesn't support any of the standards (e.g. POSIX) that libev
3878	requires, and its I/O model is fundamentally incompatible with the POSIX	4661	requires, and its I/O model is fundamentally incompatible with the POSIX
3879	model. Libev still offers limited functionality on this platform in	4662	model. Libev still offers limited functionality on this platform in
3880	the form of the C<EVBACKEND_SELECT> backend, and only supports socket	4663	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
3881	descriptors. This only applies when using Win32 natively, not when using	4664	descriptors. This only applies when using Win32 natively, not when using
3882	e.g. cygwin.	4665	e.g. cygwin. Actually, it only applies to the microsofts own compilers,
		4666	as every compielr comes with a slightly differently broken/incompatible
		4667	environment.
3883		4668
3884	Lifting these limitations would basically require the full	4669	Lifting these limitations would basically require the full
3885	re-implementation of the I/O system. If you are into these kinds of	4670	re-implementation of the I/O system. If you are into this kind of thing,
3886	things, then note that glib does exactly that for you in a very portable	4671	then note that glib does exactly that for you in a very portable way (note
3887	way (note also that glib is the slowest event library known to man).	4672	also that glib is the slowest event library known to man).
3888		4673
3889	There is no supported compilation method available on windows except	4674	There is no supported compilation method available on windows except
3890	embedding it into other applications.	4675	embedding it into other applications.
		4676
		4677	Sensible signal handling is officially unsupported by Microsoft - libev
		4678	tries its best, but under most conditions, signals will simply not work.
3891		4679
3892	Not a libev limitation but worth mentioning: windows apparently doesn't	4680	Not a libev limitation but worth mentioning: windows apparently doesn't
3893	accept large writes: instead of resulting in a partial write, windows will	4681	accept large writes: instead of resulting in a partial write, windows will
3894	either accept everything or return C<ENOBUFS> if the buffer is too large,	4682	either accept everything or return C<ENOBUFS> if the buffer is too large,
3895	so make sure you only write small amounts into your sockets (less than a	4683	so make sure you only write small amounts into your sockets (less than a
…		…
3900	the abysmal performance of winsockets, using a large number of sockets	4688	the abysmal performance of winsockets, using a large number of sockets
3901	is not recommended (and not reasonable). If your program needs to use	4689	is not recommended (and not reasonable). If your program needs to use
3902	more than a hundred or so sockets, then likely it needs to use a totally	4690	more than a hundred or so sockets, then likely it needs to use a totally
3903	different implementation for windows, as libev offers the POSIX readiness	4691	different implementation for windows, as libev offers the POSIX readiness
3904	notification model, which cannot be implemented efficiently on windows	4692	notification model, which cannot be implemented efficiently on windows
3905	(Microsoft monopoly games).	4693	(due to Microsoft monopoly games).
3906		4694
3907	A typical way to use libev under windows is to embed it (see the embedding	4695	A typical way to use libev under windows is to embed it (see the embedding
3908	section for details) and use the following F<evwrap.h> header file instead	4696	section for details) and use the following F<evwrap.h> header file instead
3909	of F<ev.h>:	4697	of F<ev.h>:
3910		4698
…		…
3917	you do I<not> compile the F<ev.c> or any other embedded source files!):	4705	you do I<not> compile the F<ev.c> or any other embedded source files!):
3918		4706
3919	#include "evwrap.h"	4707	#include "evwrap.h"
3920	#include "ev.c"	4708	#include "ev.c"
3921		4709
3922	=over 4
3923
3924	=item The winsocket select function	4710	=head3 The winsocket C<select> function
3925		4711
3926	The winsocket C<select> function doesn't follow POSIX in that it	4712	The winsocket C<select> function doesn't follow POSIX in that it
3927	requires socket I<handles> and not socket I<file descriptors> (it is	4713	requires socket I<handles> and not socket I<file descriptors> (it is
3928	also extremely buggy). This makes select very inefficient, and also	4714	also extremely buggy). This makes select very inefficient, and also
3929	requires a mapping from file descriptors to socket handles (the Microsoft	4715	requires a mapping from file descriptors to socket handles (the Microsoft
…		…
3938	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */	4724	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
3939		4725
3940	Note that winsockets handling of fd sets is O(n), so you can easily get a	4726	Note that winsockets handling of fd sets is O(n), so you can easily get a
3941	complexity in the O(n²) range when using win32.	4727	complexity in the O(n²) range when using win32.
3942		4728
3943	=item Limited number of file descriptors	4729	=head3 Limited number of file descriptors
3944		4730
3945	Windows has numerous arbitrary (and low) limits on things.	4731	Windows has numerous arbitrary (and low) limits on things.
3946		4732
3947	Early versions of winsocket's select only supported waiting for a maximum	4733	Early versions of winsocket's select only supported waiting for a maximum
3948	of C<64> handles (probably owning to the fact that all windows kernels	4734	of C<64> handles (probably owning to the fact that all windows kernels
3949	can only wait for C<64> things at the same time internally; Microsoft	4735	can only wait for C<64> things at the same time internally; Microsoft
3950	recommends spawning a chain of threads and wait for 63 handles and the	4736	recommends spawning a chain of threads and wait for 63 handles and the
3951	previous thread in each. Great).	4737	previous thread in each. Sounds great!).
3952		4738
3953	Newer versions support more handles, but you need to define C<FD_SETSIZE>	4739	Newer versions support more handles, but you need to define C<FD_SETSIZE>
3954	to some high number (e.g. C<2048>) before compiling the winsocket select	4740	to some high number (e.g. C<2048>) before compiling the winsocket select
3955	call (which might be in libev or elsewhere, for example, perl does its own	4741	call (which might be in libev or elsewhere, for example, perl and many
3956	select emulation on windows).	4742	other interpreters do their own select emulation on windows).
3957		4743
3958	Another limit is the number of file descriptors in the Microsoft runtime	4744	Another limit is the number of file descriptors in the Microsoft runtime
3959	libraries, which by default is C<64> (there must be a hidden I<64> fetish	4745	libraries, which by default is C<64> (there must be a hidden I<64>
3960	or something like this inside Microsoft). You can increase this by calling	4746	fetish or something like this inside Microsoft). You can increase this
3961	C<_setmaxstdio>, which can increase this limit to C<2048> (another	4747	by calling C<_setmaxstdio>, which can increase this limit to C<2048>
3962	arbitrary limit), but is broken in many versions of the Microsoft runtime	4748	(another arbitrary limit), but is broken in many versions of the Microsoft
3963	libraries.
3964
3965	This might get you to about C<512> or C<2048> sockets (depending on	4749	runtime libraries. This might get you to about C<512> or C<2048> sockets
3966	windows version and/or the phase of the moon). To get more, you need to	4750	(depending on windows version and/or the phase of the moon). To get more,
3967	wrap all I/O functions and provide your own fd management, but the cost of	4751	you need to wrap all I/O functions and provide your own fd management, but
3968	calling select (O(n²)) will likely make this unworkable.	4752	the cost of calling select (O(n²)) will likely make this unworkable.
3969
3970	=back
3971		4753
3972	=head2 PORTABILITY REQUIREMENTS	4754	=head2 PORTABILITY REQUIREMENTS
3973		4755
3974	In addition to a working ISO-C implementation and of course the	4756	In addition to a working ISO-C implementation and of course the
3975	backend-specific APIs, libev relies on a few additional extensions:	4757	backend-specific APIs, libev relies on a few additional extensions:
…		…
3982	Libev assumes not only that all watcher pointers have the same internal	4764	Libev assumes not only that all watcher pointers have the same internal
3983	structure (guaranteed by POSIX but not by ISO C for example), but it also	4765	structure (guaranteed by POSIX but not by ISO C for example), but it also
3984	assumes that the same (machine) code can be used to call any watcher	4766	assumes that the same (machine) code can be used to call any watcher
3985	callback: The watcher callbacks have different type signatures, but libev	4767	callback: The watcher callbacks have different type signatures, but libev
3986	calls them using an C<ev_watcher *> internally.	4768	calls them using an C<ev_watcher *> internally.
		4769
		4770	=item pointer accesses must be thread-atomic
		4771
		4772	Accessing a pointer value must be atomic, it must both be readable and
		4773	writable in one piece - this is the case on all current architectures.
3987		4774
3988	=item C<sig_atomic_t volatile> must be thread-atomic as well	4775	=item C<sig_atomic_t volatile> must be thread-atomic as well
3989		4776
3990	The type C<sig_atomic_t volatile> (or whatever is defined as	4777	The type C<sig_atomic_t volatile> (or whatever is defined as
3991	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different	4778	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different
…		…
4014	watchers.	4801	watchers.
4015		4802
4016	=item C<double> must hold a time value in seconds with enough accuracy	4803	=item C<double> must hold a time value in seconds with enough accuracy
4017		4804
4018	The type C<double> is used to represent timestamps. It is required to	4805	The type C<double> is used to represent timestamps. It is required to
4019	have at least 51 bits of mantissa (and 9 bits of exponent), which is good	4806	have at least 51 bits of mantissa (and 9 bits of exponent), which is
4020	enough for at least into the year 4000. This requirement is fulfilled by	4807	good enough for at least into the year 4000 with millisecond accuracy
		4808	(the design goal for libev). This requirement is overfulfilled by
4021	implementations implementing IEEE 754 (basically all existing ones).	4809	implementations using IEEE 754, which is basically all existing ones. With
		4810	IEEE 754 doubles, you get microsecond accuracy until at least 2200.
4022		4811
4023	=back	4812	=back
4024		4813
4025	If you know of other additional requirements drop me a note.	4814	If you know of other additional requirements drop me a note.
4026		4815
…		…
4094	involves iterating over all running async watchers or all signal numbers.	4883	involves iterating over all running async watchers or all signal numbers.
4095		4884
4096	=back	4885	=back
4097		4886
4098		4887
		4888	=head1 PORTING FROM LIBEV 3.X TO 4.X
		4889
		4890	The major version 4 introduced some incompatible changes to the API.
		4891
		4892	At the moment, the C<ev.h> header file provides compatibility definitions
		4893	for all changes, so most programs should still compile. The compatibility
		4894	layer might be removed in later versions of libev, so better update to the
		4895	new API early than late.
		4896
		4897	=over 4
		4898
		4899	=item C<EV_COMPAT3> backwards compatibility mechanism
		4900
		4901	The backward compatibility mechanism can be controlled by
		4902	C<EV_COMPAT3>. See L<PREPROCESSOR SYMBOLS/MACROS> in the L<EMBEDDING>
		4903	section.
		4904
		4905	=item C<ev_default_destroy> and C<ev_default_fork> have been removed
		4906
		4907	These calls can be replaced easily by their C<ev_loop_xxx> counterparts:
		4908
		4909	ev_loop_destroy (EV_DEFAULT_UC);
		4910	ev_loop_fork (EV_DEFAULT);
		4911
		4912	=item function/symbol renames
		4913
		4914	A number of functions and symbols have been renamed:
		4915
		4916	ev_loop => ev_run
		4917	EVLOOP_NONBLOCK => EVRUN_NOWAIT
		4918	EVLOOP_ONESHOT => EVRUN_ONCE
		4919
		4920	ev_unloop => ev_break
		4921	EVUNLOOP_CANCEL => EVBREAK_CANCEL
		4922	EVUNLOOP_ONE => EVBREAK_ONE
		4923	EVUNLOOP_ALL => EVBREAK_ALL
		4924
		4925	EV_TIMEOUT => EV_TIMER
		4926
		4927	ev_loop_count => ev_iteration
		4928	ev_loop_depth => ev_depth
		4929	ev_loop_verify => ev_verify
		4930
		4931	Most functions working on C<struct ev_loop> objects don't have an
		4932	C<ev_loop_> prefix, so it was removed; C<ev_loop>, C<ev_unloop> and
		4933	associated constants have been renamed to not collide with the C<struct
		4934	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme
		4935	as all other watcher types. Note that C<ev_loop_fork> is still called
		4936	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>
		4937	typedef.
		4938
		4939	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>
		4940
		4941	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different
		4942	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile
		4943	and work, but the library code will of course be larger.
		4944
		4945	=back
		4946
		4947
4099	=head1 GLOSSARY	4948	=head1 GLOSSARY
4100		4949
4101	=over 4	4950	=over 4
4102		4951
4103	=item active	4952	=item active
4104		4953
4105	A watcher is active as long as it has been started (has been attached to	4954	A watcher is active as long as it has been started and not yet stopped.
4106	an event loop) but not yet stopped (disassociated from the event loop).	4955	See L<WATCHER STATES> for details.
4107		4956
4108	=item application	4957	=item application
4109		4958
4110	In this document, an application is whatever is using libev.	4959	In this document, an application is whatever is using libev.
		4960
		4961	=item backend
		4962
		4963	The part of the code dealing with the operating system interfaces.
4111		4964
4112	=item callback	4965	=item callback
4113		4966
4114	The address of a function that is called when some event has been	4967	The address of a function that is called when some event has been
4115	detected. Callbacks are being passed the event loop, the watcher that	4968	detected. Callbacks are being passed the event loop, the watcher that
4116	received the event, and the actual event bitset.	4969	received the event, and the actual event bitset.
4117		4970
4118	=item callback invocation	4971	=item callback/watcher invocation
4119		4972
4120	The act of calling the callback associated with a watcher.	4973	The act of calling the callback associated with a watcher.
4121		4974
4122	=item event	4975	=item event
4123		4976
4124	A change of state of some external event, such as data now being available	4977	A change of state of some external event, such as data now being available
4125	for reading on a file descriptor, time having passed or simply not having	4978	for reading on a file descriptor, time having passed or simply not having
4126	any other events happening anymore.	4979	any other events happening anymore.
4127		4980
4128	In libev, events are represented as single bits (such as C<EV_READ> or	4981	In libev, events are represented as single bits (such as C<EV_READ> or
4129	C<EV_TIMEOUT>).	4982	C<EV_TIMER>).
4130		4983
4131	=item event library	4984	=item event library
4132		4985
4133	A software package implementing an event model and loop.	4986	A software package implementing an event model and loop.
4134		4987
…		…
4142	The model used to describe how an event loop handles and processes	4995	The model used to describe how an event loop handles and processes
4143	watchers and events.	4996	watchers and events.
4144		4997
4145	=item pending	4998	=item pending
4146		4999
4147	A watcher is pending as soon as the corresponding event has been detected,	5000	A watcher is pending as soon as the corresponding event has been
4148	and stops being pending as soon as the watcher will be invoked or its	5001	detected. See L<WATCHER STATES> for details.
4149	pending status is explicitly cleared by the application.
4150
4151	A watcher can be pending, but not active. Stopping a watcher also clears
4152	its pending status.
4153		5002
4154	=item real time	5003	=item real time
4155		5004
4156	The physical time that is observed. It is apparently strictly monotonic :)	5005	The physical time that is observed. It is apparently strictly monotonic :)
4157		5006
…		…
4164	=item watcher	5013	=item watcher
4165		5014
4166	A data structure that describes interest in certain events. Watchers need	5015	A data structure that describes interest in certain events. Watchers need
4167	to be started (attached to an event loop) before they can receive events.	5016	to be started (attached to an event loop) before they can receive events.
4168		5017
4169	=item watcher invocation
4170
4171	The act of calling the callback associated with a watcher.
4172
4173	=back	5018	=back
4174		5019
4175	=head1 AUTHOR	5020	=head1 AUTHOR
4176		5021
4177	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael Magnusson.	5022	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael
		5023	Magnusson and Emanuele Giaquinta.
4178		5024

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines