ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.223 by root, Sun Dec 14 21:58:08 2008 UTC vs.
Revision 1.399 by root, Mon Apr 2 23:14:41 2012 UTC

…		…
26	puts ("stdin ready");	26	puts ("stdin ready");
27	// for one-shot events, one must manually stop the watcher	27	// for one-shot events, one must manually stop the watcher
28	// with its corresponding stop function.	28	// with its corresponding stop function.
29	ev_io_stop (EV_A_ w);	29	ev_io_stop (EV_A_ w);
30		30
31	// this causes all nested ev_loop's to stop iterating	31	// this causes all nested ev_run's to stop iterating
32	ev_unloop (EV_A_ EVUNLOOP_ALL);	32	ev_break (EV_A_ EVBREAK_ALL);
33	}	33	}
34		34
35	// another callback, this time for a time-out	35	// another callback, this time for a time-out
36	static void	36	static void
37	timeout_cb (EV_P_ ev_timer *w, int revents)	37	timeout_cb (EV_P_ ev_timer *w, int revents)
38	{	38	{
39	puts ("timeout");	39	puts ("timeout");
40	// this causes the innermost ev_loop to stop iterating	40	// this causes the innermost ev_run to stop iterating
41	ev_unloop (EV_A_ EVUNLOOP_ONE);	41	ev_break (EV_A_ EVBREAK_ONE);
42	}	42	}
43		43
44	int	44	int
45	main (void)	45	main (void)
46	{	46	{
47	// use the default event loop unless you have special needs	47	// use the default event loop unless you have special needs
48	struct ev_loop *loop = ev_default_loop (0);	48	struct ev_loop *loop = EV_DEFAULT;
49		49
50	// initialise an io watcher, then start it	50	// initialise an io watcher, then start it
51	// this one will watch for stdin to become readable	51	// this one will watch for stdin to become readable
52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
53	ev_io_start (loop, &stdin_watcher);	53	ev_io_start (loop, &stdin_watcher);
…		…
56	// simple non-repeating 5.5 second timeout	56	// simple non-repeating 5.5 second timeout
57	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	57	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
58	ev_timer_start (loop, &timeout_watcher);	58	ev_timer_start (loop, &timeout_watcher);
59		59
60	// now wait for events to arrive	60	// now wait for events to arrive
61	ev_loop (loop, 0);	61	ev_run (loop, 0);
62		62
63	// unloop was called, so exit	63	// break was called, so exit
64	return 0;	64	return 0;
65	}	65	}
66		66
67	=head1 DESCRIPTION	67	=head1 ABOUT THIS DOCUMENT
		68
		69	This document documents the libev software package.
68		70
69	The newest version of this document is also available as an html-formatted	71	The newest version of this document is also available as an html-formatted
70	web page you might find easier to navigate when reading it for the first	72	web page you might find easier to navigate when reading it for the first
71	time: L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.	73	time: L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.
		74
		75	While this document tries to be as complete as possible in documenting
		76	libev, its usage and the rationale behind its design, it is not a tutorial
		77	on event-based programming, nor will it introduce event-based programming
		78	with libev.
		79
		80	Familiarity with event based programming techniques in general is assumed
		81	throughout this document.
		82
		83	=head1 WHAT TO READ WHEN IN A HURRY
		84
		85	This manual tries to be very detailed, but unfortunately, this also makes
		86	it very long. If you just want to know the basics of libev, I suggest
		87	reading L<ANATOMY OF A WATCHER>, then the L<EXAMPLE PROGRAM> above and
		88	look up the missing functions in L<GLOBAL FUNCTIONS> and the C<ev_io> and
		89	C<ev_timer> sections in L<WATCHER TYPES>.
		90
		91	=head1 ABOUT LIBEV
72		92
73	Libev is an event loop: you register interest in certain events (such as a	93	Libev is an event loop: you register interest in certain events (such as a
74	file descriptor being readable or a timeout occurring), and it will manage	94	file descriptor being readable or a timeout occurring), and it will manage
75	these event sources and provide your program with events.	95	these event sources and provide your program with events.
76		96
…		…
86	=head2 FEATURES	106	=head2 FEATURES
87		107
88	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	108	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
89	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	109	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
90	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	110	for file descriptor events (C<ev_io>), the Linux C<inotify> interface
91	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers	111	(for C<ev_stat>), Linux eventfd/signalfd (for faster and cleaner
92	with customised rescheduling (C<ev_periodic>), synchronous signals	112	inter-thread wakeup (C<ev_async>)/signal handling (C<ev_signal>)) relative
93	(C<ev_signal>), process status change events (C<ev_child>), and event	113	timers (C<ev_timer>), absolute timers with customised rescheduling
94	watchers dealing with the event loop mechanism itself (C<ev_idle>,	114	(C<ev_periodic>), synchronous signals (C<ev_signal>), process status
95	C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as	115	change events (C<ev_child>), and event watchers dealing with the event
96	file watchers (C<ev_stat>) and even limited support for fork events	116	loop mechanism itself (C<ev_idle>, C<ev_embed>, C<ev_prepare> and
97	(C<ev_fork>).	117	C<ev_check> watchers) as well as file watchers (C<ev_stat>) and even
		118	limited support for fork events (C<ev_fork>).
98		119
99	It also is quite fast (see this	120	It also is quite fast (see this
100	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent	121	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
101	for example).	122	for example).
102		123
…		…
105	Libev is very configurable. In this manual the default (and most common)	126	Libev is very configurable. In this manual the default (and most common)
106	configuration will be described, which supports multiple event loops. For	127	configuration will be described, which supports multiple event loops. For
107	more info about various configuration options please have a look at	128	more info about various configuration options please have a look at
108	B<EMBED> section in this manual. If libev was configured without support	129	B<EMBED> section in this manual. If libev was configured without support
109	for multiple event loops, then all functions taking an initial argument of	130	for multiple event loops, then all functions taking an initial argument of
110	name C<loop> (which is always of type C<ev_loop *>) will not have	131	name C<loop> (which is always of type C<struct ev_loop *>) will not have
111	this argument.	132	this argument.
112		133
113	=head2 TIME REPRESENTATION	134	=head2 TIME REPRESENTATION
114		135
115	Libev represents time as a single floating point number, representing the	136	Libev represents time as a single floating point number, representing
116	(fractional) number of seconds since the (POSIX) epoch (somewhere near	137	the (fractional) number of seconds since the (POSIX) epoch (in practice
117	the beginning of 1970, details are complicated, don't ask). This type is	138	somewhere near the beginning of 1970, details are complicated, don't
118	called C<ev_tstamp>, which is what you should use too. It usually aliases	139	ask). This type is called C<ev_tstamp>, which is what you should use
119	to the C<double> type in C, and when you need to do any calculations on	140	too. It usually aliases to the C<double> type in C. When you need to do
120	it, you should treat it as some floating point value. Unlike the name	141	any calculations on it, you should treat it as some floating point value.
		142
121	component C<stamp> might indicate, it is also used for time differences	143	Unlike the name component C<stamp> might indicate, it is also used for
122	throughout libev.	144	time differences (e.g. delays) throughout libev.
123		145
124	=head1 ERROR HANDLING	146	=head1 ERROR HANDLING
125		147
126	Libev knows three classes of errors: operating system errors, usage errors	148	Libev knows three classes of errors: operating system errors, usage errors
127	and internal errors (bugs).	149	and internal errors (bugs).
…		…
151		173
152	=item ev_tstamp ev_time ()	174	=item ev_tstamp ev_time ()
153		175
154	Returns the current time as libev would use it. Please note that the	176	Returns the current time as libev would use it. Please note that the
155	C<ev_now> function is usually faster and also often returns the timestamp	177	C<ev_now> function is usually faster and also often returns the timestamp
156	you actually want to know.	178	you actually want to know. Also interesting is the combination of
		179	C<ev_now_update> and C<ev_now>.
157		180
158	=item ev_sleep (ev_tstamp interval)	181	=item ev_sleep (ev_tstamp interval)
159		182
160	Sleep for the given interval: The current thread will be blocked until	183	Sleep for the given interval: The current thread will be blocked
161	either it is interrupted or the given time interval has passed. Basically	184	until either it is interrupted or the given time interval has
		185	passed (approximately - it might return a bit earlier even if not
		186	interrupted). Returns immediately if C<< interval <= 0 >>.
		187
162	this is a sub-second-resolution C<sleep ()>.	188	Basically this is a sub-second-resolution C<sleep ()>.
		189
		190	The range of the C<interval> is limited - libev only guarantees to work
		191	with sleep times of up to one day (C<< interval <= 86400 >>).
163		192
164	=item int ev_version_major ()	193	=item int ev_version_major ()
165		194
166	=item int ev_version_minor ()	195	=item int ev_version_minor ()
167		196
…		…
178	as this indicates an incompatible change. Minor versions are usually	207	as this indicates an incompatible change. Minor versions are usually
179	compatible to older versions, so a larger minor version alone is usually	208	compatible to older versions, so a larger minor version alone is usually
180	not a problem.	209	not a problem.
181		210
182	Example: Make sure we haven't accidentally been linked against the wrong	211	Example: Make sure we haven't accidentally been linked against the wrong
183	version.	212	version (note, however, that this will not detect other ABI mismatches,
		213	such as LFS or reentrancy).
184		214
185	assert (("libev version mismatch",	215	assert (("libev version mismatch",
186	ev_version_major () == EV_VERSION_MAJOR	216	ev_version_major () == EV_VERSION_MAJOR
187	&& ev_version_minor () >= EV_VERSION_MINOR));	217	&& ev_version_minor () >= EV_VERSION_MINOR));
188		218
…		…
199	assert (("sorry, no epoll, no sex",	229	assert (("sorry, no epoll, no sex",
200	ev_supported_backends () & EVBACKEND_EPOLL));	230	ev_supported_backends () & EVBACKEND_EPOLL));
201		231
202	=item unsigned int ev_recommended_backends ()	232	=item unsigned int ev_recommended_backends ()
203		233
204	Return the set of all backends compiled into this binary of libev and also	234	Return the set of all backends compiled into this binary of libev and
205	recommended for this platform. This set is often smaller than the one	235	also recommended for this platform, meaning it will work for most file
		236	descriptor types. This set is often smaller than the one returned by
206	returned by C<ev_supported_backends>, as for example kqueue is broken on	237	C<ev_supported_backends>, as for example kqueue is broken on most BSDs
207	most BSDs and will not be auto-detected unless you explicitly request it	238	and will not be auto-detected unless you explicitly request it (assuming
208	(assuming you know what you are doing). This is the set of backends that	239	you know what you are doing). This is the set of backends that libev will
209	libev will probe for if you specify no backends explicitly.	240	probe for if you specify no backends explicitly.
210		241
211	=item unsigned int ev_embeddable_backends ()	242	=item unsigned int ev_embeddable_backends ()
212		243
213	Returns the set of backends that are embeddable in other event loops. This	244	Returns the set of backends that are embeddable in other event loops. This
214	is the theoretical, all-platform, value. To find which backends	245	value is platform-specific but can include backends not available on the
215	might be supported on the current system, you would need to look at	246	current system. To find which embeddable backends might be supported on
216	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for	247	the current system, you would need to look at C<ev_embeddable_backends ()
217	recommended ones.	248	& ev_supported_backends ()>, likewise for recommended ones.
218		249
219	See the description of C<ev_embed> watchers for more info.	250	See the description of C<ev_embed> watchers for more info.
220		251
221	=item ev_set_allocator (void *(*cb)(void *ptr, long size)) [NOT REENTRANT]	252	=item ev_set_allocator (void *(*cb)(void *ptr, long size))
222		253
223	Sets the allocation function to use (the prototype is similar - the	254	Sets the allocation function to use (the prototype is similar - the
224	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is	255	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
225	used to allocate and free memory (no surprises here). If it returns zero	256	used to allocate and free memory (no surprises here). If it returns zero
226	when memory needs to be allocated (C<size != 0>), the library might abort	257	when memory needs to be allocated (C<size != 0>), the library might abort
…		…
252	}	283	}
253		284
254	...	285	...
255	ev_set_allocator (persistent_realloc);	286	ev_set_allocator (persistent_realloc);
256		287
257	=item ev_set_syserr_cb (void (*cb)(const char *msg)); [NOT REENTRANT]	288	=item ev_set_syserr_cb (void (*cb)(const char *msg))
258		289
259	Set the callback function to call on a retryable system call error (such	290	Set the callback function to call on a retryable system call error (such
260	as failed select, poll, epoll_wait). The message is a printable string	291	as failed select, poll, epoll_wait). The message is a printable string
261	indicating the system call or subsystem causing the problem. If this	292	indicating the system call or subsystem causing the problem. If this
262	callback is set, then libev will expect it to remedy the situation, no	293	callback is set, then libev will expect it to remedy the situation, no
…		…
274	}	305	}
275		306
276	...	307	...
277	ev_set_syserr_cb (fatal_error);	308	ev_set_syserr_cb (fatal_error);
278		309
		310	=item ev_feed_signal (int signum)
		311
		312	This function can be used to "simulate" a signal receive. It is completely
		313	safe to call this function at any time, from any context, including signal
		314	handlers or random threads.
		315
		316	Its main use is to customise signal handling in your process, especially
		317	in the presence of threads. For example, you could block signals
		318	by default in all threads (and specifying C<EVFLAG_NOSIGMASK> when
		319	creating any loops), and in one thread, use C<sigwait> or any other
		320	mechanism to wait for signals, then "deliver" them to libev by calling
		321	C<ev_feed_signal>.
		322
279	=back	323	=back
280		324
281	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	325	=head1 FUNCTIONS CONTROLLING EVENT LOOPS
282		326
283	An event loop is described by a C<struct ev_loop *> (the C<struct>	327	An event loop is described by a C<struct ev_loop *> (the C<struct> is
284	is I<not> optional in this case, as there is also an C<ev_loop>	328	I<not> optional in this case unless libev 3 compatibility is disabled, as
285	I<function>).	329	libev 3 had an C<ev_loop> function colliding with the struct name).
286		330
287	The library knows two types of such loops, the I<default> loop, which	331	The library knows two types of such loops, the I<default> loop, which
288	supports signals and child events, and dynamically created loops which do	332	supports child process events, and dynamically created event loops which
289	not.	333	do not.
290		334
291	=over 4	335	=over 4
292		336
293	=item struct ev_loop *ev_default_loop (unsigned int flags)	337	=item struct ev_loop *ev_default_loop (unsigned int flags)
294		338
295	This will initialise the default event loop if it hasn't been initialised	339	This returns the "default" event loop object, which is what you should
296	yet and return it. If the default loop could not be initialised, returns	340	normally use when you just need "the event loop". Event loop objects and
297	false. If it already was initialised it simply returns it (and ignores the	341	the C<flags> parameter are described in more detail in the entry for
298	flags. If that is troubling you, check C<ev_backend ()> afterwards).	342	C<ev_loop_new>.
		343
		344	If the default loop is already initialised then this function simply
		345	returns it (and ignores the flags. If that is troubling you, check
		346	C<ev_backend ()> afterwards). Otherwise it will create it with the given
		347	flags, which should almost always be C<0>, unless the caller is also the
		348	one calling C<ev_run> or otherwise qualifies as "the main program".
299		349
300	If you don't know what event loop to use, use the one returned from this	350	If you don't know what event loop to use, use the one returned from this
301	function.	351	function (or via the C<EV_DEFAULT> macro).
302		352
303	Note that this function is I<not> thread-safe, so if you want to use it	353	Note that this function is I<not> thread-safe, so if you want to use it
304	from multiple threads, you have to lock (note also that this is unlikely,	354	from multiple threads, you have to employ some kind of mutex (note also
305	as loops cannot be shared easily between threads anyway).	355	that this case is unlikely, as loops cannot be shared easily between
		356	threads anyway).
306		357
307	The default loop is the only loop that can handle C<ev_signal> and	358	The default loop is the only loop that can handle C<ev_child> watchers,
308	C<ev_child> watchers, and to do this, it always registers a handler	359	and to do this, it always registers a handler for C<SIGCHLD>. If this is
309	for C<SIGCHLD>. If this is a problem for your application you can either	360	a problem for your application you can either create a dynamic loop with
310	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you	361	C<ev_loop_new> which doesn't do that, or you can simply overwrite the
311	can simply overwrite the C<SIGCHLD> signal handler I<after> calling	362	C<SIGCHLD> signal handler I<after> calling C<ev_default_init>.
312	C<ev_default_init>.	363
		364	Example: This is the most typical usage.
		365
		366	if (!ev_default_loop (0))
		367	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		368
		369	Example: Restrict libev to the select and poll backends, and do not allow
		370	environment settings to be taken into account:
		371
		372	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
		373
		374	=item struct ev_loop *ev_loop_new (unsigned int flags)
		375
		376	This will create and initialise a new event loop object. If the loop
		377	could not be initialised, returns false.
		378
		379	This function is thread-safe, and one common way to use libev with
		380	threads is indeed to create one loop per thread, and using the default
		381	loop in the "main" or "initial" thread.
313		382
314	The flags argument can be used to specify special behaviour or specific	383	The flags argument can be used to specify special behaviour or specific
315	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	384	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
316		385
317	The following flags are supported:	386	The following flags are supported:
…		…
332	useful to try out specific backends to test their performance, or to work	401	useful to try out specific backends to test their performance, or to work
333	around bugs.	402	around bugs.
334		403
335	=item C<EVFLAG_FORKCHECK>	404	=item C<EVFLAG_FORKCHECK>
336		405
337	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after	406	Instead of calling C<ev_loop_fork> manually after a fork, you can also
338	a fork, you can also make libev check for a fork in each iteration by	407	make libev check for a fork in each iteration by enabling this flag.
339	enabling this flag.
340		408
341	This works by calling C<getpid ()> on every iteration of the loop,	409	This works by calling C<getpid ()> on every iteration of the loop,
342	and thus this might slow down your event loop if you do a lot of loop	410	and thus this might slow down your event loop if you do a lot of loop
343	iterations and little real work, but is usually not noticeable (on my	411	iterations and little real work, but is usually not noticeable (on my
344	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence	412	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence
…		…
350	flag.	418	flag.
351		419
352	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>	420	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>
353	environment variable.	421	environment variable.
354		422
		423	=item C<EVFLAG_NOINOTIFY>
		424
		425	When this flag is specified, then libev will not attempt to use the
		426	I<inotify> API for its C<ev_stat> watchers. Apart from debugging and
		427	testing, this flag can be useful to conserve inotify file descriptors, as
		428	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.
		429
		430	=item C<EVFLAG_SIGNALFD>
		431
		432	When this flag is specified, then libev will attempt to use the
		433	I<signalfd> API for its C<ev_signal> (and C<ev_child>) watchers. This API
		434	delivers signals synchronously, which makes it both faster and might make
		435	it possible to get the queued signal data. It can also simplify signal
		436	handling with threads, as long as you properly block signals in your
		437	threads that are not interested in handling them.
		438
		439	Signalfd will not be used by default as this changes your signal mask, and
		440	there are a lot of shoddy libraries and programs (glib's threadpool for
		441	example) that can't properly initialise their signal masks.
		442
		443	=item C<EVFLAG_NOSIGMASK>
		444
		445	When this flag is specified, then libev will avoid to modify the signal
		446	mask. Specifically, this means you have to make sure signals are unblocked
		447	when you want to receive them.
		448
		449	This behaviour is useful when you want to do your own signal handling, or
		450	want to handle signals only in specific threads and want to avoid libev
		451	unblocking the signals.
		452
		453	It's also required by POSIX in a threaded program, as libev calls
		454	C<sigprocmask>, whose behaviour is officially unspecified.
		455
		456	This flag's behaviour will become the default in future versions of libev.
		457
355	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	458	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
356		459
357	This is your standard select(2) backend. Not I<completely> standard, as	460	This is your standard select(2) backend. Not I<completely> standard, as
358	libev tries to roll its own fd_set with no limits on the number of fds,	461	libev tries to roll its own fd_set with no limits on the number of fds,
359	but if that fails, expect a fairly low limit on the number of fds when	462	but if that fails, expect a fairly low limit on the number of fds when
…		…
383	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and	486	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and
384	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.	487	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.
385		488
386	=item C<EVBACKEND_EPOLL> (value 4, Linux)	489	=item C<EVBACKEND_EPOLL> (value 4, Linux)
387		490
		491	Use the linux-specific epoll(7) interface (for both pre- and post-2.6.9
		492	kernels).
		493
388	For few fds, this backend is a bit little slower than poll and select,	494	For few fds, this backend is a bit little slower than poll and select, but
389	but it scales phenomenally better. While poll and select usually scale	495	it scales phenomenally better. While poll and select usually scale like
390	like O(total_fds) where n is the total number of fds (or the highest fd),	496	O(total_fds) where total_fds is the total number of fds (or the highest
391	epoll scales either O(1) or O(active_fds).	497	fd), epoll scales either O(1) or O(active_fds).
392		498
393	The epoll mechanism deserves honorable mention as the most misdesigned	499	The epoll mechanism deserves honorable mention as the most misdesigned
394	of the more advanced event mechanisms: mere annoyances include silently	500	of the more advanced event mechanisms: mere annoyances include silently
395	dropping file descriptors, requiring a system call per change per file	501	dropping file descriptors, requiring a system call per change per file
396	descriptor (and unnecessary guessing of parameters), problems with dup and	502	descriptor (and unnecessary guessing of parameters), problems with dup,
		503	returning before the timeout value, resulting in additional iterations
		504	(and only giving 5ms accuracy while select on the same platform gives
397	so on. The biggest issue is fork races, however - if a program forks then	505	0.1ms) and so on. The biggest issue is fork races, however - if a program
398	I<both> parent and child process have to recreate the epoll set, which can	506	forks then I<both> parent and child process have to recreate the epoll
399	take considerable time (one syscall per file descriptor) and is of course	507	set, which can take considerable time (one syscall per file descriptor)
400	hard to detect.	508	and is of course hard to detect.
401		509
402	Epoll is also notoriously buggy - embedding epoll fds I<should> work, but	510	Epoll is also notoriously buggy - embedding epoll fds I<should> work,
403	of course I<doesn't>, and epoll just loves to report events for totally	511	but of course I<doesn't>, and epoll just loves to report events for
404	I<different> file descriptors (even already closed ones, so one cannot	512	totally I<different> file descriptors (even already closed ones, so
405	even remove them from the set) than registered in the set (especially	513	one cannot even remove them from the set) than registered in the set
406	on SMP systems). Libev tries to counter these spurious notifications by	514	(especially on SMP systems). Libev tries to counter these spurious
407	employing an additional generation counter and comparing that against the	515	notifications by employing an additional generation counter and comparing
408	events to filter out spurious ones, recreating the set when required.	516	that against the events to filter out spurious ones, recreating the set
		517	when required. Epoll also erroneously rounds down timeouts, but gives you
		518	no way to know when and by how much, so sometimes you have to busy-wait
		519	because epoll returns immediately despite a nonzero timeout. And last
		520	not least, it also refuses to work with some file descriptors which work
		521	perfectly fine with C<select> (files, many character devices...).
		522
		523	Epoll is truly the train wreck among event poll mechanisms, a frankenpoll,
		524	cobbled together in a hurry, no thought to design or interaction with
		525	others. Oh, the pain, will it ever stop...
409		526
410	While stopping, setting and starting an I/O watcher in the same iteration	527	While stopping, setting and starting an I/O watcher in the same iteration
411	will result in some caching, there is still a system call per such	528	will result in some caching, there is still a system call per such
412	incident (because the same I<file descriptor> could point to a different	529	incident (because the same I<file descriptor> could point to a different
413	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed	530	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed
…		…
450		567
451	It scales in the same way as the epoll backend, but the interface to the	568	It scales in the same way as the epoll backend, but the interface to the
452	kernel is more efficient (which says nothing about its actual speed, of	569	kernel is more efficient (which says nothing about its actual speed, of
453	course). While stopping, setting and starting an I/O watcher does never	570	course). While stopping, setting and starting an I/O watcher does never
454	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to	571	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to
455	two event changes per incident. Support for C<fork ()> is very bad (but	572	two event changes per incident. Support for C<fork ()> is very bad (you
456	sane, unlike epoll) and it drops fds silently in similarly hard-to-detect	573	might have to leak fd's on fork, but it's more sane than epoll) and it
457	cases	574	drops fds silently in similarly hard-to-detect cases
458		575
459	This backend usually performs well under most conditions.	576	This backend usually performs well under most conditions.
460		577
461	While nominally embeddable in other event loops, this doesn't work	578	While nominally embeddable in other event loops, this doesn't work
462	everywhere, so you might need to test for this. And since it is broken	579	everywhere, so you might need to test for this. And since it is broken
…		…
479	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	596	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
480		597
481	This uses the Solaris 10 event port mechanism. As with everything on Solaris,	598	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
482	it's really slow, but it still scales very well (O(active_fds)).	599	it's really slow, but it still scales very well (O(active_fds)).
483		600
484	Please note that Solaris event ports can deliver a lot of spurious
485	notifications, so you need to use non-blocking I/O or other means to avoid
486	blocking when no data (or space) is available.
487
488	While this backend scales well, it requires one system call per active	601	While this backend scales well, it requires one system call per active
489	file descriptor per loop iteration. For small and medium numbers of file	602	file descriptor per loop iteration. For small and medium numbers of file
490	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend	603	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
491	might perform better.	604	might perform better.
492		605
493	On the positive side, with the exception of the spurious readiness	606	On the positive side, this backend actually performed fully to
494	notifications, this backend actually performed fully to specification
495	in all tests and is fully embeddable, which is a rare feat among the	607	specification in all tests and is fully embeddable, which is a rare feat
496	OS-specific backends (I vastly prefer correctness over speed hacks).	608	among the OS-specific backends (I vastly prefer correctness over speed
		609	hacks).
		610
		611	On the negative side, the interface is I<bizarre> - so bizarre that
		612	even sun itself gets it wrong in their code examples: The event polling
		613	function sometimes returns events to the caller even though an error
		614	occurred, but with no indication whether it has done so or not (yes, it's
		615	even documented that way) - deadly for edge-triggered interfaces where you
		616	absolutely have to know whether an event occurred or not because you have
		617	to re-arm the watcher.
		618
		619	Fortunately libev seems to be able to work around these idiocies.
497		620
498	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as	621	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
499	C<EVBACKEND_POLL>.	622	C<EVBACKEND_POLL>.
500		623
501	=item C<EVBACKEND_ALL>	624	=item C<EVBACKEND_ALL>
502		625
503	Try all backends (even potentially broken ones that wouldn't be tried	626	Try all backends (even potentially broken ones that wouldn't be tried
504	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	627	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
505	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	628	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
506		629
507	It is definitely not recommended to use this flag.	630	It is definitely not recommended to use this flag, use whatever
		631	C<ev_recommended_backends ()> returns, or simply do not specify a backend
		632	at all.
		633
		634	=item C<EVBACKEND_MASK>
		635
		636	Not a backend at all, but a mask to select all backend bits from a
		637	C<flags> value, in case you want to mask out any backends from a flags
		638	value (e.g. when modifying the C<LIBEV_FLAGS> environment variable).
508		639
509	=back	640	=back
510		641
511	If one or more of these are or'ed into the flags value, then only these	642	If one or more of the backend flags are or'ed into the flags value,
512	backends will be tried (in the reverse order as listed here). If none are	643	then only these backends will be tried (in the reverse order as listed
513	specified, all backends in C<ev_recommended_backends ()> will be tried.	644	here). If none are specified, all backends in C<ev_recommended_backends
514		645	()> will be tried.
515	Example: This is the most typical usage.
516
517	if (!ev_default_loop (0))
518	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
519
520	Example: Restrict libev to the select and poll backends, and do not allow
521	environment settings to be taken into account:
522
523	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
524
525	Example: Use whatever libev has to offer, but make sure that kqueue is
526	used if available (warning, breaks stuff, best use only with your own
527	private event loop and only if you know the OS supports your types of
528	fds):
529
530	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
531
532	=item struct ev_loop *ev_loop_new (unsigned int flags)
533
534	Similar to C<ev_default_loop>, but always creates a new event loop that is
535	always distinct from the default loop. Unlike the default loop, it cannot
536	handle signal and child watchers, and attempts to do so will be greeted by
537	undefined behaviour (or a failed assertion if assertions are enabled).
538
539	Note that this function I<is> thread-safe, and the recommended way to use
540	libev with threads is indeed to create one loop per thread, and using the
541	default loop in the "main" or "initial" thread.
542		646
543	Example: Try to create a event loop that uses epoll and nothing else.	647	Example: Try to create a event loop that uses epoll and nothing else.
544		648
545	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	649	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
546	if (!epoller)	650	if (!epoller)
547	fatal ("no epoll found here, maybe it hides under your chair");	651	fatal ("no epoll found here, maybe it hides under your chair");
548		652
		653	Example: Use whatever libev has to offer, but make sure that kqueue is
		654	used if available.
		655
		656	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_KQUEUE);
		657
549	=item ev_default_destroy ()	658	=item ev_loop_destroy (loop)
550		659
551	Destroys the default loop again (frees all memory and kernel state	660	Destroys an event loop object (frees all memory and kernel state
552	etc.). None of the active event watchers will be stopped in the normal	661	etc.). None of the active event watchers will be stopped in the normal
553	sense, so e.g. C<ev_is_active> might still return true. It is your	662	sense, so e.g. C<ev_is_active> might still return true. It is your
554	responsibility to either stop all watchers cleanly yourself I<before>	663	responsibility to either stop all watchers cleanly yourself I<before>
555	calling this function, or cope with the fact afterwards (which is usually	664	calling this function, or cope with the fact afterwards (which is usually
556	the easiest thing, you can just ignore the watchers and/or C<free ()> them	665	the easiest thing, you can just ignore the watchers and/or C<free ()> them
…		…
558		667
559	Note that certain global state, such as signal state (and installed signal	668	Note that certain global state, such as signal state (and installed signal
560	handlers), will not be freed by this function, and related watchers (such	669	handlers), will not be freed by this function, and related watchers (such
561	as signal and child watchers) would need to be stopped manually.	670	as signal and child watchers) would need to be stopped manually.
562		671
563	In general it is not advisable to call this function except in the	672	This function is normally used on loop objects allocated by
564	rare occasion where you really need to free e.g. the signal handling	673	C<ev_loop_new>, but it can also be used on the default loop returned by
		674	C<ev_default_loop>, in which case it is not thread-safe.
		675
		676	Note that it is not advisable to call this function on the default loop
		677	except in the rare occasion where you really need to free its resources.
565	pipe fds. If you need dynamically allocated loops it is better to use	678	If you need dynamically allocated loops it is better to use C<ev_loop_new>
566	C<ev_loop_new> and C<ev_loop_destroy>).	679	and C<ev_loop_destroy>.
567		680
568	=item ev_loop_destroy (loop)	681	=item ev_loop_fork (loop)
569		682
570	Like C<ev_default_destroy>, but destroys an event loop created by an
571	earlier call to C<ev_loop_new>.
572
573	=item ev_default_fork ()
574
575	This function sets a flag that causes subsequent C<ev_loop> iterations	683	This function sets a flag that causes subsequent C<ev_run> iterations to
576	to reinitialise the kernel state for backends that have one. Despite the	684	reinitialise the kernel state for backends that have one. Despite the
577	name, you can call it anytime, but it makes most sense after forking, in	685	name, you can call it anytime, but it makes most sense after forking, in
578	the child process (or both child and parent, but that again makes little	686	the child process. You I<must> call it (or use C<EVFLAG_FORKCHECK>) in the
579	sense). You I<must> call it in the child before using any of the libev	687	child before resuming or calling C<ev_run>.
580	functions, and it will only take effect at the next C<ev_loop> iteration.	688
		689	Again, you I<have> to call it on I<any> loop that you want to re-use after
		690	a fork, I<even if you do not plan to use the loop in the parent>. This is
		691	because some kernel interfaces *cough* I<kqueue> *cough* do funny things
		692	during fork.
581		693
582	On the other hand, you only need to call this function in the child	694	On the other hand, you only need to call this function in the child
583	process if and only if you want to use the event library in the child. If	695	process if and only if you want to use the event loop in the child. If
584	you just fork+exec, you don't have to call it at all.	696	you just fork+exec or create a new loop in the child, you don't have to
		697	call it at all (in fact, C<epoll> is so badly broken that it makes a
		698	difference, but libev will usually detect this case on its own and do a
		699	costly reset of the backend).
585		700
586	The function itself is quite fast and it's usually not a problem to call	701	The function itself is quite fast and it's usually not a problem to call
587	it just in case after a fork. To make this easy, the function will fit in	702	it just in case after a fork.
588	quite nicely into a call to C<pthread_atfork>:
589		703
		704	Example: Automate calling C<ev_loop_fork> on the default loop when
		705	using pthreads.
		706
		707	static void
		708	post_fork_child (void)
		709	{
		710	ev_loop_fork (EV_DEFAULT);
		711	}
		712
		713	...
590	pthread_atfork (0, 0, ev_default_fork);	714	pthread_atfork (0, 0, post_fork_child);
591
592	=item ev_loop_fork (loop)
593
594	Like C<ev_default_fork>, but acts on an event loop created by
595	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
596	after fork that you want to re-use in the child, and how you do this is
597	entirely your own problem.
598		715
599	=item int ev_is_default_loop (loop)	716	=item int ev_is_default_loop (loop)
600		717
601	Returns true when the given loop is, in fact, the default loop, and false	718	Returns true when the given loop is, in fact, the default loop, and false
602	otherwise.	719	otherwise.
603		720
604	=item unsigned int ev_loop_count (loop)	721	=item unsigned int ev_iteration (loop)
605		722
606	Returns the count of loop iterations for the loop, which is identical to	723	Returns the current iteration count for the event loop, which is identical
607	the number of times libev did poll for new events. It starts at C<0> and	724	to the number of times libev did poll for new events. It starts at C<0>
608	happily wraps around with enough iterations.	725	and happily wraps around with enough iterations.
609		726
610	This value can sometimes be useful as a generation counter of sorts (it	727	This value can sometimes be useful as a generation counter of sorts (it
611	"ticks" the number of loop iterations), as it roughly corresponds with	728	"ticks" the number of loop iterations), as it roughly corresponds with
612	C<ev_prepare> and C<ev_check> calls.	729	C<ev_prepare> and C<ev_check> calls - and is incremented between the
		730	prepare and check phases.
		731
		732	=item unsigned int ev_depth (loop)
		733
		734	Returns the number of times C<ev_run> was entered minus the number of
		735	times C<ev_run> was exited normally, in other words, the recursion depth.
		736
		737	Outside C<ev_run>, this number is zero. In a callback, this number is
		738	C<1>, unless C<ev_run> was invoked recursively (or from another thread),
		739	in which case it is higher.
		740
		741	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread,
		742	throwing an exception etc.), doesn't count as "exit" - consider this
		743	as a hint to avoid such ungentleman-like behaviour unless it's really
		744	convenient, in which case it is fully supported.
613		745
614	=item unsigned int ev_backend (loop)	746	=item unsigned int ev_backend (loop)
615		747
616	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	748	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
617	use.	749	use.
…		…
626		758
627	=item ev_now_update (loop)	759	=item ev_now_update (loop)
628		760
629	Establishes the current time by querying the kernel, updating the time	761	Establishes the current time by querying the kernel, updating the time
630	returned by C<ev_now ()> in the progress. This is a costly operation and	762	returned by C<ev_now ()> in the progress. This is a costly operation and
631	is usually done automatically within C<ev_loop ()>.	763	is usually done automatically within C<ev_run ()>.
632		764
633	This function is rarely useful, but when some event callback runs for a	765	This function is rarely useful, but when some event callback runs for a
634	very long time without entering the event loop, updating libev's idea of	766	very long time without entering the event loop, updating libev's idea of
635	the current time is a good idea.	767	the current time is a good idea.
636		768
637	See also "The special problem of time updates" in the C<ev_timer> section.	769	See also L<The special problem of time updates> in the C<ev_timer> section.
638		770
		771	=item ev_suspend (loop)
		772
		773	=item ev_resume (loop)
		774
		775	These two functions suspend and resume an event loop, for use when the
		776	loop is not used for a while and timeouts should not be processed.
		777
		778	A typical use case would be an interactive program such as a game: When
		779	the user presses C<^Z> to suspend the game and resumes it an hour later it
		780	would be best to handle timeouts as if no time had actually passed while
		781	the program was suspended. This can be achieved by calling C<ev_suspend>
		782	in your C<SIGTSTP> handler, sending yourself a C<SIGSTOP> and calling
		783	C<ev_resume> directly afterwards to resume timer processing.
		784
		785	Effectively, all C<ev_timer> watchers will be delayed by the time spend
		786	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers
		787	will be rescheduled (that is, they will lose any events that would have
		788	occurred while suspended).
		789
		790	After calling C<ev_suspend> you B<must not> call I<any> function on the
		791	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>
		792	without a previous call to C<ev_suspend>.
		793
		794	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the
		795	event loop time (see C<ev_now_update>).
		796
639	=item ev_loop (loop, int flags)	797	=item bool ev_run (loop, int flags)
640		798
641	Finally, this is it, the event handler. This function usually is called	799	Finally, this is it, the event handler. This function usually is called
642	after you initialised all your watchers and you want to start handling	800	after you have initialised all your watchers and you want to start
643	events.	801	handling events. It will ask the operating system for any new events, call
		802	the watcher callbacks, and then repeat the whole process indefinitely: This
		803	is why event loops are called I<loops>.
644		804
645	If the flags argument is specified as C<0>, it will not return until	805	If the flags argument is specified as C<0>, it will keep handling events
646	either no event watchers are active anymore or C<ev_unloop> was called.	806	until either no event watchers are active anymore or C<ev_break> was
		807	called.
647		808
		809	The return value is false if there are no more active watchers (which
		810	usually means "all jobs done" or "deadlock"), and true in all other cases
		811	(which usually means " you should call C<ev_run> again").
		812
648	Please note that an explicit C<ev_unloop> is usually better than	813	Please note that an explicit C<ev_break> is usually better than
649	relying on all watchers to be stopped when deciding when a program has	814	relying on all watchers to be stopped when deciding when a program has
650	finished (especially in interactive programs), but having a program	815	finished (especially in interactive programs), but having a program
651	that automatically loops as long as it has to and no longer by virtue	816	that automatically loops as long as it has to and no longer by virtue
652	of relying on its watchers stopping correctly, that is truly a thing of	817	of relying on its watchers stopping correctly, that is truly a thing of
653	beauty.	818	beauty.
654		819
		820	This function is I<mostly> exception-safe - you can break out of a
		821	C<ev_run> call by calling C<longjmp> in a callback, throwing a C++
		822	exception and so on. This does not decrement the C<ev_depth> value, nor
		823	will it clear any outstanding C<EVBREAK_ONE> breaks.
		824
655	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle	825	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle
656	those events and any already outstanding ones, but will not block your	826	those events and any already outstanding ones, but will not wait and
657	process in case there are no events and will return after one iteration of	827	block your process in case there are no events and will return after one
658	the loop.	828	iteration of the loop. This is sometimes useful to poll and handle new
		829	events while doing lengthy calculations, to keep the program responsive.
659		830
660	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if	831	A flags value of C<EVRUN_ONCE> will look for new events (waiting if
661	necessary) and will handle those and any already outstanding ones. It	832	necessary) and will handle those and any already outstanding ones. It
662	will block your process until at least one new event arrives (which could	833	will block your process until at least one new event arrives (which could
663	be an event internal to libev itself, so there is no guarantee that a	834	be an event internal to libev itself, so there is no guarantee that a
664	user-registered callback will be called), and will return after one	835	user-registered callback will be called), and will return after one
665	iteration of the loop.	836	iteration of the loop.
666		837
667	This is useful if you are waiting for some external event in conjunction	838	This is useful if you are waiting for some external event in conjunction
668	with something not expressible using other libev watchers (i.e. "roll your	839	with something not expressible using other libev watchers (i.e. "roll your
669	own C<ev_loop>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is	840	own C<ev_run>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is
670	usually a better approach for this kind of thing.	841	usually a better approach for this kind of thing.
671		842
672	Here are the gory details of what C<ev_loop> does:	843	Here are the gory details of what C<ev_run> does (this is for your
		844	understanding, not a guarantee that things will work exactly like this in
		845	future versions):
673		846
		847	- Increment loop depth.
		848	- Reset the ev_break status.
674	- Before the first iteration, call any pending watchers.	849	- Before the first iteration, call any pending watchers.
		850	LOOP:
675	* If EVFLAG_FORKCHECK was used, check for a fork.	851	- If EVFLAG_FORKCHECK was used, check for a fork.
676	- If a fork was detected (by any means), queue and call all fork watchers.	852	- If a fork was detected (by any means), queue and call all fork watchers.
677	- Queue and call all prepare watchers.	853	- Queue and call all prepare watchers.
		854	- If ev_break was called, goto FINISH.
678	- If we have been forked, detach and recreate the kernel state	855	- If we have been forked, detach and recreate the kernel state
679	as to not disturb the other process.	856	as to not disturb the other process.
680	- Update the kernel state with all outstanding changes.	857	- Update the kernel state with all outstanding changes.
681	- Update the "event loop time" (ev_now ()).	858	- Update the "event loop time" (ev_now ()).
682	- Calculate for how long to sleep or block, if at all	859	- Calculate for how long to sleep or block, if at all
683	(active idle watchers, EVLOOP_NONBLOCK or not having	860	(active idle watchers, EVRUN_NOWAIT or not having
684	any active watchers at all will result in not sleeping).	861	any active watchers at all will result in not sleeping).
685	- Sleep if the I/O and timer collect interval say so.	862	- Sleep if the I/O and timer collect interval say so.
		863	- Increment loop iteration counter.
686	- Block the process, waiting for any events.	864	- Block the process, waiting for any events.
687	- Queue all outstanding I/O (fd) events.	865	- Queue all outstanding I/O (fd) events.
688	- Update the "event loop time" (ev_now ()), and do time jump adjustments.	866	- Update the "event loop time" (ev_now ()), and do time jump adjustments.
689	- Queue all expired timers.	867	- Queue all expired timers.
690	- Queue all expired periodics.	868	- Queue all expired periodics.
691	- Unless any events are pending now, queue all idle watchers.	869	- Queue all idle watchers with priority higher than that of pending events.
692	- Queue all check watchers.	870	- Queue all check watchers.
693	- Call all queued watchers in reverse order (i.e. check watchers first).	871	- Call all queued watchers in reverse order (i.e. check watchers first).
694	Signals and child watchers are implemented as I/O watchers, and will	872	Signals and child watchers are implemented as I/O watchers, and will
695	be handled here by queueing them when their watcher gets executed.	873	be handled here by queueing them when their watcher gets executed.
696	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	874	- If ev_break has been called, or EVRUN_ONCE or EVRUN_NOWAIT
697	were used, or there are no active watchers, return, otherwise	875	were used, or there are no active watchers, goto FINISH, otherwise
698	continue with step *.	876	continue with step LOOP.
		877	FINISH:
		878	- Reset the ev_break status iff it was EVBREAK_ONE.
		879	- Decrement the loop depth.
		880	- Return.
699		881
700	Example: Queue some jobs and then loop until no events are outstanding	882	Example: Queue some jobs and then loop until no events are outstanding
701	anymore.	883	anymore.
702		884
703	... queue jobs here, make sure they register event watchers as long	885	... queue jobs here, make sure they register event watchers as long
704	... as they still have work to do (even an idle watcher will do..)	886	... as they still have work to do (even an idle watcher will do..)
705	ev_loop (my_loop, 0);	887	ev_run (my_loop, 0);
706	... jobs done or somebody called unloop. yeah!	888	... jobs done or somebody called break. yeah!
707		889
708	=item ev_unloop (loop, how)	890	=item ev_break (loop, how)
709		891
710	Can be used to make a call to C<ev_loop> return early (but only after it	892	Can be used to make a call to C<ev_run> return early (but only after it
711	has processed all outstanding events). The C<how> argument must be either	893	has processed all outstanding events). The C<how> argument must be either
712	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	894	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or
713	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	895	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.
714		896
715	This "unloop state" will be cleared when entering C<ev_loop> again.	897	This "break state" will be cleared on the next call to C<ev_run>.
716		898
717	It is safe to call C<ev_unloop> from otuside any C<ev_loop> calls.	899	It is safe to call C<ev_break> from outside any C<ev_run> calls, too, in
		900	which case it will have no effect.
718		901
719	=item ev_ref (loop)	902	=item ev_ref (loop)
720		903
721	=item ev_unref (loop)	904	=item ev_unref (loop)
722		905
723	Ref/unref can be used to add or remove a reference count on the event	906	Ref/unref can be used to add or remove a reference count on the event
724	loop: Every watcher keeps one reference, and as long as the reference	907	loop: Every watcher keeps one reference, and as long as the reference
725	count is nonzero, C<ev_loop> will not return on its own.	908	count is nonzero, C<ev_run> will not return on its own.
726		909
727	If you have a watcher you never unregister that should not keep C<ev_loop>	910	This is useful when you have a watcher that you never intend to
728	from returning, call ev_unref() after starting, and ev_ref() before	911	unregister, but that nevertheless should not keep C<ev_run> from
		912	returning. In such a case, call C<ev_unref> after starting, and C<ev_ref>
729	stopping it.	913	before stopping it.
730		914
731	As an example, libev itself uses this for its internal signal pipe: It is	915	As an example, libev itself uses this for its internal signal pipe: It
732	not visible to the libev user and should not keep C<ev_loop> from exiting	916	is not visible to the libev user and should not keep C<ev_run> from
733	if no event watchers registered by it are active. It is also an excellent	917	exiting if no event watchers registered by it are active. It is also an
734	way to do this for generic recurring timers or from within third-party	918	excellent way to do this for generic recurring timers or from within
735	libraries. Just remember to I<unref after start> and I<ref before stop>	919	third-party libraries. Just remember to I<unref after start> and I<ref
736	(but only if the watcher wasn't active before, or was active before,	920	before stop> (but only if the watcher wasn't active before, or was active
737	respectively).	921	before, respectively. Note also that libev might stop watchers itself
		922	(e.g. non-repeating timers) in which case you have to C<ev_ref>
		923	in the callback).
738		924
739	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	925	Example: Create a signal watcher, but keep it from keeping C<ev_run>
740	running when nothing else is active.	926	running when nothing else is active.
741		927
742	ev_signal exitsig;	928	ev_signal exitsig;
743	ev_signal_init (&exitsig, sig_cb, SIGINT);	929	ev_signal_init (&exitsig, sig_cb, SIGINT);
744	ev_signal_start (loop, &exitsig);	930	ev_signal_start (loop, &exitsig);
745	evf_unref (loop);	931	ev_unref (loop);
746		932
747	Example: For some weird reason, unregister the above signal handler again.	933	Example: For some weird reason, unregister the above signal handler again.
748		934
749	ev_ref (loop);	935	ev_ref (loop);
750	ev_signal_stop (loop, &exitsig);	936	ev_signal_stop (loop, &exitsig);
…		…
770	overhead for the actual polling but can deliver many events at once.	956	overhead for the actual polling but can deliver many events at once.
771		957
772	By setting a higher I<io collect interval> you allow libev to spend more	958	By setting a higher I<io collect interval> you allow libev to spend more
773	time collecting I/O events, so you can handle more events per iteration,	959	time collecting I/O events, so you can handle more events per iteration,
774	at the cost of increasing latency. Timeouts (both C<ev_periodic> and	960	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
775	C<ev_timer>) will be not affected. Setting this to a non-null value will	961	C<ev_timer>) will not be affected. Setting this to a non-null value will
776	introduce an additional C<ev_sleep ()> call into most loop iterations.	962	introduce an additional C<ev_sleep ()> call into most loop iterations. The
		963	sleep time ensures that libev will not poll for I/O events more often then
		964	once per this interval, on average (as long as the host time resolution is
		965	good enough).
777		966
778	Likewise, by setting a higher I<timeout collect interval> you allow libev	967	Likewise, by setting a higher I<timeout collect interval> you allow libev
779	to spend more time collecting timeouts, at the expense of increased	968	to spend more time collecting timeouts, at the expense of increased
780	latency/jitter/inexactness (the watcher callback will be called	969	latency/jitter/inexactness (the watcher callback will be called
781	later). C<ev_io> watchers will not be affected. Setting this to a non-null	970	later). C<ev_io> watchers will not be affected. Setting this to a non-null
…		…
783		972
784	Many (busy) programs can usually benefit by setting the I/O collect	973	Many (busy) programs can usually benefit by setting the I/O collect
785	interval to a value near C<0.1> or so, which is often enough for	974	interval to a value near C<0.1> or so, which is often enough for
786	interactive servers (of course not for games), likewise for timeouts. It	975	interactive servers (of course not for games), likewise for timeouts. It
787	usually doesn't make much sense to set it to a lower value than C<0.01>,	976	usually doesn't make much sense to set it to a lower value than C<0.01>,
788	as this approaches the timing granularity of most systems.	977	as this approaches the timing granularity of most systems. Note that if
		978	you do transactions with the outside world and you can't increase the
		979	parallelity, then this setting will limit your transaction rate (if you
		980	need to poll once per transaction and the I/O collect interval is 0.01,
		981	then you can't do more than 100 transactions per second).
789		982
790	Setting the I<timeout collect interval> can improve the opportunity for	983	Setting the I<timeout collect interval> can improve the opportunity for
791	saving power, as the program will "bundle" timer callback invocations that	984	saving power, as the program will "bundle" timer callback invocations that
792	are "near" in time together, by delaying some, thus reducing the number of	985	are "near" in time together, by delaying some, thus reducing the number of
793	times the process sleeps and wakes up again. Another useful technique to	986	times the process sleeps and wakes up again. Another useful technique to
794	reduce iterations/wake-ups is to use C<ev_periodic> watchers and make sure	987	reduce iterations/wake-ups is to use C<ev_periodic> watchers and make sure
795	they fire on, say, one-second boundaries only.	988	they fire on, say, one-second boundaries only.
796		989
		990	Example: we only need 0.1s timeout granularity, and we wish not to poll
		991	more often than 100 times per second:
		992
		993	ev_set_timeout_collect_interval (EV_DEFAULT_UC_ 0.1);
		994	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);
		995
		996	=item ev_invoke_pending (loop)
		997
		998	This call will simply invoke all pending watchers while resetting their
		999	pending state. Normally, C<ev_run> does this automatically when required,
		1000	but when overriding the invoke callback this call comes handy. This
		1001	function can be invoked from a watcher - this can be useful for example
		1002	when you want to do some lengthy calculation and want to pass further
		1003	event handling to another thread (you still have to make sure only one
		1004	thread executes within C<ev_invoke_pending> or C<ev_run> of course).
		1005
		1006	=item int ev_pending_count (loop)
		1007
		1008	Returns the number of pending watchers - zero indicates that no watchers
		1009	are pending.
		1010
		1011	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))
		1012
		1013	This overrides the invoke pending functionality of the loop: Instead of
		1014	invoking all pending watchers when there are any, C<ev_run> will call
		1015	this callback instead. This is useful, for example, when you want to
		1016	invoke the actual watchers inside another context (another thread etc.).
		1017
		1018	If you want to reset the callback, use C<ev_invoke_pending> as new
		1019	callback.
		1020
		1021	=item ev_set_loop_release_cb (loop, void (*release)(EV_P), void (*acquire)(EV_P))
		1022
		1023	Sometimes you want to share the same loop between multiple threads. This
		1024	can be done relatively simply by putting mutex_lock/unlock calls around
		1025	each call to a libev function.
		1026
		1027	However, C<ev_run> can run an indefinite time, so it is not feasible
		1028	to wait for it to return. One way around this is to wake up the event
		1029	loop via C<ev_break> and C<ev_async_send>, another way is to set these
		1030	I<release> and I<acquire> callbacks on the loop.
		1031
		1032	When set, then C<release> will be called just before the thread is
		1033	suspended waiting for new events, and C<acquire> is called just
		1034	afterwards.
		1035
		1036	Ideally, C<release> will just call your mutex_unlock function, and
		1037	C<acquire> will just call the mutex_lock function again.
		1038
		1039	While event loop modifications are allowed between invocations of
		1040	C<release> and C<acquire> (that's their only purpose after all), no
		1041	modifications done will affect the event loop, i.e. adding watchers will
		1042	have no effect on the set of file descriptors being watched, or the time
		1043	waited. Use an C<ev_async> watcher to wake up C<ev_run> when you want it
		1044	to take note of any changes you made.
		1045
		1046	In theory, threads executing C<ev_run> will be async-cancel safe between
		1047	invocations of C<release> and C<acquire>.
		1048
		1049	See also the locking example in the C<THREADS> section later in this
		1050	document.
		1051
		1052	=item ev_set_userdata (loop, void *data)
		1053
		1054	=item void *ev_userdata (loop)
		1055
		1056	Set and retrieve a single C<void *> associated with a loop. When
		1057	C<ev_set_userdata> has never been called, then C<ev_userdata> returns
		1058	C<0>.
		1059
		1060	These two functions can be used to associate arbitrary data with a loop,
		1061	and are intended solely for the C<invoke_pending_cb>, C<release> and
		1062	C<acquire> callbacks described above, but of course can be (ab-)used for
		1063	any other purpose as well.
		1064
797	=item ev_loop_verify (loop)	1065	=item ev_verify (loop)
798		1066
799	This function only does something when C<EV_VERIFY> support has been	1067	This function only does something when C<EV_VERIFY> support has been
800	compiled in, which is the default for non-minimal builds. It tries to go	1068	compiled in, which is the default for non-minimal builds. It tries to go
801	through all internal structures and checks them for validity. If anything	1069	through all internal structures and checks them for validity. If anything
802	is found to be inconsistent, it will print an error message to standard	1070	is found to be inconsistent, it will print an error message to standard
…		…
813		1081
814	In the following description, uppercase C<TYPE> in names stands for the	1082	In the following description, uppercase C<TYPE> in names stands for the
815	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer	1083	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer
816	watchers and C<ev_io_start> for I/O watchers.	1084	watchers and C<ev_io_start> for I/O watchers.
817		1085
818	A watcher is a structure that you create and register to record your	1086	A watcher is an opaque structure that you allocate and register to record
819	interest in some event. For instance, if you want to wait for STDIN to	1087	your interest in some event. To make a concrete example, imagine you want
820	become readable, you would create an C<ev_io> watcher for that:	1088	to wait for STDIN to become readable, you would create an C<ev_io> watcher
		1089	for that:
821		1090
822	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)	1091	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)
823	{	1092	{
824	ev_io_stop (w);	1093	ev_io_stop (w);
825	ev_unloop (loop, EVUNLOOP_ALL);	1094	ev_break (loop, EVBREAK_ALL);
826	}	1095	}
827		1096
828	struct ev_loop *loop = ev_default_loop (0);	1097	struct ev_loop *loop = ev_default_loop (0);
829		1098
830	ev_io stdin_watcher;	1099	ev_io stdin_watcher;
831		1100
832	ev_init (&stdin_watcher, my_cb);	1101	ev_init (&stdin_watcher, my_cb);
833	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);	1102	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
834	ev_io_start (loop, &stdin_watcher);	1103	ev_io_start (loop, &stdin_watcher);
835		1104
836	ev_loop (loop, 0);	1105	ev_run (loop, 0);
837		1106
838	As you can see, you are responsible for allocating the memory for your	1107	As you can see, you are responsible for allocating the memory for your
839	watcher structures (and it is I<usually> a bad idea to do this on the	1108	watcher structures (and it is I<usually> a bad idea to do this on the
840	stack).	1109	stack).
841		1110
842	Each watcher has an associated watcher structure (called C<struct ev_TYPE>	1111	Each watcher has an associated watcher structure (called C<struct ev_TYPE>
843	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).	1112	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).
844		1113
845	Each watcher structure must be initialised by a call to C<ev_init	1114	Each watcher structure must be initialised by a call to C<ev_init (watcher
846	(watcher *, callback)>, which expects a callback to be provided. This	1115	*, callback)>, which expects a callback to be provided. This callback is
847	callback gets invoked each time the event occurs (or, in the case of I/O	1116	invoked each time the event occurs (or, in the case of I/O watchers, each
848	watchers, each time the event loop detects that the file descriptor given	1117	time the event loop detects that the file descriptor given is readable
849	is readable and/or writable).	1118	and/or writable).
850		1119
851	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>	1120	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>
852	macro to configure it, with arguments specific to the watcher type. There	1121	macro to configure it, with arguments specific to the watcher type. There
853	is also a macro to combine initialisation and setting in one call: C<<	1122	is also a macro to combine initialisation and setting in one call: C<<
854	ev_TYPE_init (watcher *, callback, ...) >>.	1123	ev_TYPE_init (watcher *, callback, ...) >>.
…		…
877	=item C<EV_WRITE>	1146	=item C<EV_WRITE>
878		1147
879	The file descriptor in the C<ev_io> watcher has become readable and/or	1148	The file descriptor in the C<ev_io> watcher has become readable and/or
880	writable.	1149	writable.
881		1150
882	=item C<EV_TIMEOUT>	1151	=item C<EV_TIMER>
883		1152
884	The C<ev_timer> watcher has timed out.	1153	The C<ev_timer> watcher has timed out.
885		1154
886	=item C<EV_PERIODIC>	1155	=item C<EV_PERIODIC>
887		1156
…		…
905		1174
906	=item C<EV_PREPARE>	1175	=item C<EV_PREPARE>
907		1176
908	=item C<EV_CHECK>	1177	=item C<EV_CHECK>
909		1178
910	All C<ev_prepare> watchers are invoked just I<before> C<ev_loop> starts	1179	All C<ev_prepare> watchers are invoked just I<before> C<ev_run> starts
911	to gather new events, and all C<ev_check> watchers are invoked just after	1180	to gather new events, and all C<ev_check> watchers are invoked just after
912	C<ev_loop> has gathered them, but before it invokes any callbacks for any	1181	C<ev_run> has gathered them, but before it invokes any callbacks for any
913	received events. Callbacks of both watcher types can start and stop as	1182	received events. Callbacks of both watcher types can start and stop as
914	many watchers as they want, and all of them will be taken into account	1183	many watchers as they want, and all of them will be taken into account
915	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	1184	(for example, a C<ev_prepare> watcher might start an idle watcher to keep
916	C<ev_loop> from blocking).	1185	C<ev_run> from blocking).
917		1186
918	=item C<EV_EMBED>	1187	=item C<EV_EMBED>
919		1188
920	The embedded event loop specified in the C<ev_embed> watcher needs attention.	1189	The embedded event loop specified in the C<ev_embed> watcher needs attention.
921		1190
922	=item C<EV_FORK>	1191	=item C<EV_FORK>
923		1192
924	The event loop has been resumed in the child process after fork (see	1193	The event loop has been resumed in the child process after fork (see
925	C<ev_fork>).	1194	C<ev_fork>).
926		1195
		1196	=item C<EV_CLEANUP>
		1197
		1198	The event loop is about to be destroyed (see C<ev_cleanup>).
		1199
927	=item C<EV_ASYNC>	1200	=item C<EV_ASYNC>
928		1201
929	The given async watcher has been asynchronously notified (see C<ev_async>).	1202	The given async watcher has been asynchronously notified (see C<ev_async>).
		1203
		1204	=item C<EV_CUSTOM>
		1205
		1206	Not ever sent (or otherwise used) by libev itself, but can be freely used
		1207	by libev users to signal watchers (e.g. via C<ev_feed_event>).
930		1208
931	=item C<EV_ERROR>	1209	=item C<EV_ERROR>
932		1210
933	An unspecified error has occurred, the watcher has been stopped. This might	1211	An unspecified error has occurred, the watcher has been stopped. This might
934	happen because the watcher could not be properly started because libev	1212	happen because the watcher could not be properly started because libev
…		…
972		1250
973	ev_io w;	1251	ev_io w;
974	ev_init (&w, my_cb);	1252	ev_init (&w, my_cb);
975	ev_io_set (&w, STDIN_FILENO, EV_READ);	1253	ev_io_set (&w, STDIN_FILENO, EV_READ);
976		1254
977	=item C<ev_TYPE_set> (ev_TYPE *, [args])	1255	=item C<ev_TYPE_set> (ev_TYPE *watcher, [args])
978		1256
979	This macro initialises the type-specific parts of a watcher. You need to	1257	This macro initialises the type-specific parts of a watcher. You need to
980	call C<ev_init> at least once before you call this macro, but you can	1258	call C<ev_init> at least once before you call this macro, but you can
981	call C<ev_TYPE_set> any number of times. You must not, however, call this	1259	call C<ev_TYPE_set> any number of times. You must not, however, call this
982	macro on a watcher that is active (it can be pending, however, which is a	1260	macro on a watcher that is active (it can be pending, however, which is a
…		…
995		1273
996	Example: Initialise and set an C<ev_io> watcher in one step.	1274	Example: Initialise and set an C<ev_io> watcher in one step.
997		1275
998	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);	1276	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);
999		1277
1000	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)	1278	=item C<ev_TYPE_start> (loop, ev_TYPE *watcher)
1001		1279
1002	Starts (activates) the given watcher. Only active watchers will receive	1280	Starts (activates) the given watcher. Only active watchers will receive
1003	events. If the watcher is already active nothing will happen.	1281	events. If the watcher is already active nothing will happen.
1004		1282
1005	Example: Start the C<ev_io> watcher that is being abused as example in this	1283	Example: Start the C<ev_io> watcher that is being abused as example in this
1006	whole section.	1284	whole section.
1007		1285
1008	ev_io_start (EV_DEFAULT_UC, &w);	1286	ev_io_start (EV_DEFAULT_UC, &w);
1009		1287
1010	=item C<ev_TYPE_stop> (loop *, ev_TYPE *watcher)	1288	=item C<ev_TYPE_stop> (loop, ev_TYPE *watcher)
1011		1289
1012	Stops the given watcher if active, and clears the pending status (whether	1290	Stops the given watcher if active, and clears the pending status (whether
1013	the watcher was active or not).	1291	the watcher was active or not).
1014		1292
1015	It is possible that stopped watchers are pending - for example,	1293	It is possible that stopped watchers are pending - for example,
…		…
1040	=item ev_cb_set (ev_TYPE *watcher, callback)	1318	=item ev_cb_set (ev_TYPE *watcher, callback)
1041		1319
1042	Change the callback. You can change the callback at virtually any time	1320	Change the callback. You can change the callback at virtually any time
1043	(modulo threads).	1321	(modulo threads).
1044		1322
1045	=item ev_set_priority (ev_TYPE *watcher, priority)	1323	=item ev_set_priority (ev_TYPE *watcher, int priority)
1046		1324
1047	=item int ev_priority (ev_TYPE *watcher)	1325	=item int ev_priority (ev_TYPE *watcher)
1048		1326
1049	Set and query the priority of the watcher. The priority is a small	1327	Set and query the priority of the watcher. The priority is a small
1050	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>	1328	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
1051	(default: C<-2>). Pending watchers with higher priority will be invoked	1329	(default: C<-2>). Pending watchers with higher priority will be invoked
1052	before watchers with lower priority, but priority will not keep watchers	1330	before watchers with lower priority, but priority will not keep watchers
1053	from being executed (except for C<ev_idle> watchers).	1331	from being executed (except for C<ev_idle> watchers).
1054		1332
1055	This means that priorities are I<only> used for ordering callback
1056	invocation after new events have been received. This is useful, for
1057	example, to reduce latency after idling, or more often, to bind two
1058	watchers on the same event and make sure one is called first.
1059
1060	If you need to suppress invocation when higher priority events are pending	1333	If you need to suppress invocation when higher priority events are pending
1061	you need to look at C<ev_idle> watchers, which provide this functionality.	1334	you need to look at C<ev_idle> watchers, which provide this functionality.
1062		1335
1063	You I<must not> change the priority of a watcher as long as it is active or	1336	You I<must not> change the priority of a watcher as long as it is active or
1064	pending.	1337	pending.
1065
1066	The default priority used by watchers when no priority has been set is
1067	always C<0>, which is supposed to not be too high and not be too low :).
1068		1338
1069	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is	1339	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is
1070	fine, as long as you do not mind that the priority value you query might	1340	fine, as long as you do not mind that the priority value you query might
1071	or might not have been clamped to the valid range.	1341	or might not have been clamped to the valid range.
		1342
		1343	The default priority used by watchers when no priority has been set is
		1344	always C<0>, which is supposed to not be too high and not be too low :).
		1345
		1346	See L<WATCHER PRIORITY MODELS>, below, for a more thorough treatment of
		1347	priorities.
1072		1348
1073	=item ev_invoke (loop, ev_TYPE *watcher, int revents)	1349	=item ev_invoke (loop, ev_TYPE *watcher, int revents)
1074		1350
1075	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither	1351	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
1076	C<loop> nor C<revents> need to be valid as long as the watcher callback	1352	C<loop> nor C<revents> need to be valid as long as the watcher callback
…		…
1084	watcher isn't pending it does nothing and returns C<0>.	1360	watcher isn't pending it does nothing and returns C<0>.
1085		1361
1086	Sometimes it can be useful to "poll" a watcher instead of waiting for its	1362	Sometimes it can be useful to "poll" a watcher instead of waiting for its
1087	callback to be invoked, which can be accomplished with this function.	1363	callback to be invoked, which can be accomplished with this function.
1088		1364
		1365	=item ev_feed_event (loop, ev_TYPE *watcher, int revents)
		1366
		1367	Feeds the given event set into the event loop, as if the specified event
		1368	had happened for the specified watcher (which must be a pointer to an
		1369	initialised but not necessarily started event watcher). Obviously you must
		1370	not free the watcher as long as it has pending events.
		1371
		1372	Stopping the watcher, letting libev invoke it, or calling
		1373	C<ev_clear_pending> will clear the pending event, even if the watcher was
		1374	not started in the first place.
		1375
		1376	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
		1377	functions that do not need a watcher.
		1378
1089	=back	1379	=back
1090		1380
		1381	See also the L<ASSOCIATING CUSTOM DATA WITH A WATCHER> and L<BUILDING YOUR
		1382	OWN COMPOSITE WATCHERS> idioms.
1091		1383
1092	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	1384	=head2 WATCHER STATES
1093		1385
1094	Each watcher has, by default, a member C<void *data> that you can change	1386	There are various watcher states mentioned throughout this manual -
1095	and read at any time: libev will completely ignore it. This can be used	1387	active, pending and so on. In this section these states and the rules to
1096	to associate arbitrary data with your watcher. If you need more data and	1388	transition between them will be described in more detail - and while these
1097	don't want to allocate memory and store a pointer to it in that data	1389	rules might look complicated, they usually do "the right thing".
1098	member, you can also "subclass" the watcher type and provide your own
1099	data:
1100		1390
1101	struct my_io	1391	=over 4
		1392
		1393	=item initialiased
		1394
		1395	Before a watcher can be registered with the event loop it has to be
		1396	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
		1397	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
		1398
		1399	In this state it is simply some block of memory that is suitable for
		1400	use in an event loop. It can be moved around, freed, reused etc. at
		1401	will - as long as you either keep the memory contents intact, or call
		1402	C<ev_TYPE_init> again.
		1403
		1404	=item started/running/active
		1405
		1406	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
		1407	property of the event loop, and is actively waiting for events. While in
		1408	this state it cannot be accessed (except in a few documented ways), moved,
		1409	freed or anything else - the only legal thing is to keep a pointer to it,
		1410	and call libev functions on it that are documented to work on active watchers.
		1411
		1412	=item pending
		1413
		1414	If a watcher is active and libev determines that an event it is interested
		1415	in has occurred (such as a timer expiring), it will become pending. It will
		1416	stay in this pending state until either it is stopped or its callback is
		1417	about to be invoked, so it is not normally pending inside the watcher
		1418	callback.
		1419
		1420	The watcher might or might not be active while it is pending (for example,
		1421	an expired non-repeating timer can be pending but no longer active). If it
		1422	is stopped, it can be freely accessed (e.g. by calling C<ev_TYPE_set>),
		1423	but it is still property of the event loop at this time, so cannot be
		1424	moved, freed or reused. And if it is active the rules described in the
		1425	previous item still apply.
		1426
		1427	It is also possible to feed an event on a watcher that is not active (e.g.
		1428	via C<ev_feed_event>), in which case it becomes pending without being
		1429	active.
		1430
		1431	=item stopped
		1432
		1433	A watcher can be stopped implicitly by libev (in which case it might still
		1434	be pending), or explicitly by calling its C<ev_TYPE_stop> function. The
		1435	latter will clear any pending state the watcher might be in, regardless
		1436	of whether it was active or not, so stopping a watcher explicitly before
		1437	freeing it is often a good idea.
		1438
		1439	While stopped (and not pending) the watcher is essentially in the
		1440	initialised state, that is, it can be reused, moved, modified in any way
		1441	you wish (but when you trash the memory block, you need to C<ev_TYPE_init>
		1442	it again).
		1443
		1444	=back
		1445
		1446	=head2 WATCHER PRIORITY MODELS
		1447
		1448	Many event loops support I<watcher priorities>, which are usually small
		1449	integers that influence the ordering of event callback invocation
		1450	between watchers in some way, all else being equal.
		1451
		1452	In libev, Watcher priorities can be set using C<ev_set_priority>. See its
		1453	description for the more technical details such as the actual priority
		1454	range.
		1455
		1456	There are two common ways how these these priorities are being interpreted
		1457	by event loops:
		1458
		1459	In the more common lock-out model, higher priorities "lock out" invocation
		1460	of lower priority watchers, which means as long as higher priority
		1461	watchers receive events, lower priority watchers are not being invoked.
		1462
		1463	The less common only-for-ordering model uses priorities solely to order
		1464	callback invocation within a single event loop iteration: Higher priority
		1465	watchers are invoked before lower priority ones, but they all get invoked
		1466	before polling for new events.
		1467
		1468	Libev uses the second (only-for-ordering) model for all its watchers
		1469	except for idle watchers (which use the lock-out model).
		1470
		1471	The rationale behind this is that implementing the lock-out model for
		1472	watchers is not well supported by most kernel interfaces, and most event
		1473	libraries will just poll for the same events again and again as long as
		1474	their callbacks have not been executed, which is very inefficient in the
		1475	common case of one high-priority watcher locking out a mass of lower
		1476	priority ones.
		1477
		1478	Static (ordering) priorities are most useful when you have two or more
		1479	watchers handling the same resource: a typical usage example is having an
		1480	C<ev_io> watcher to receive data, and an associated C<ev_timer> to handle
		1481	timeouts. Under load, data might be received while the program handles
		1482	other jobs, but since timers normally get invoked first, the timeout
		1483	handler will be executed before checking for data. In that case, giving
		1484	the timer a lower priority than the I/O watcher ensures that I/O will be
		1485	handled first even under adverse conditions (which is usually, but not
		1486	always, what you want).
		1487
		1488	Since idle watchers use the "lock-out" model, meaning that idle watchers
		1489	will only be executed when no same or higher priority watchers have
		1490	received events, they can be used to implement the "lock-out" model when
		1491	required.
		1492
		1493	For example, to emulate how many other event libraries handle priorities,
		1494	you can associate an C<ev_idle> watcher to each such watcher, and in
		1495	the normal watcher callback, you just start the idle watcher. The real
		1496	processing is done in the idle watcher callback. This causes libev to
		1497	continuously poll and process kernel event data for the watcher, but when
		1498	the lock-out case is known to be rare (which in turn is rare :), this is
		1499	workable.
		1500
		1501	Usually, however, the lock-out model implemented that way will perform
		1502	miserably under the type of load it was designed to handle. In that case,
		1503	it might be preferable to stop the real watcher before starting the
		1504	idle watcher, so the kernel will not have to process the event in case
		1505	the actual processing will be delayed for considerable time.
		1506
		1507	Here is an example of an I/O watcher that should run at a strictly lower
		1508	priority than the default, and which should only process data when no
		1509	other events are pending:
		1510
		1511	ev_idle idle; // actual processing watcher
		1512	ev_io io; // actual event watcher
		1513
		1514	static void
		1515	io_cb (EV_P_ ev_io *w, int revents)
1102	{	1516	{
1103	ev_io io;	1517	// stop the I/O watcher, we received the event, but
1104	int otherfd;	1518	// are not yet ready to handle it.
1105	void *somedata;	1519	ev_io_stop (EV_A_ w);
1106	struct whatever *mostinteresting;	1520
		1521	// start the idle watcher to handle the actual event.
		1522	// it will not be executed as long as other watchers
		1523	// with the default priority are receiving events.
		1524	ev_idle_start (EV_A_ &idle);
1107	};	1525	}
1108		1526
1109	...	1527	static void
1110	struct my_io w;	1528	idle_cb (EV_P_ ev_idle *w, int revents)
1111	ev_io_init (&w.io, my_cb, fd, EV_READ);
1112
1113	And since your callback will be called with a pointer to the watcher, you
1114	can cast it back to your own type:
1115
1116	static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)
1117	{	1529	{
1118	struct my_io *w = (struct my_io *)w_;	1530	// actual processing
1119	...	1531	read (STDIN_FILENO, ...);
		1532
		1533	// have to start the I/O watcher again, as
		1534	// we have handled the event
		1535	ev_io_start (EV_P_ &io);
1120	}	1536	}
1121		1537
1122	More interesting and less C-conformant ways of casting your callback type	1538	// initialisation
1123	instead have been omitted.	1539	ev_idle_init (&idle, idle_cb);
		1540	ev_io_init (&io, io_cb, STDIN_FILENO, EV_READ);
		1541	ev_io_start (EV_DEFAULT_ &io);
1124		1542
1125	Another common scenario is to use some data structure with multiple	1543	In the "real" world, it might also be beneficial to start a timer, so that
1126	embedded watchers:	1544	low-priority connections can not be locked out forever under load. This
1127		1545	enables your program to keep a lower latency for important connections
1128	struct my_biggy	1546	during short periods of high load, while not completely locking out less
1129	{	1547	important ones.
1130	int some_data;
1131	ev_timer t1;
1132	ev_timer t2;
1133	}
1134
1135	In this case getting the pointer to C<my_biggy> is a bit more
1136	complicated: Either you store the address of your C<my_biggy> struct
1137	in the C<data> member of the watcher (for woozies), or you need to use
1138	some pointer arithmetic using C<offsetof> inside your watchers (for real
1139	programmers):
1140
1141	#include <stddef.h>
1142
1143	static void
1144	t1_cb (EV_P_ ev_timer *w, int revents)
1145	{
1146	struct my_biggy big = (struct my_biggy *
1147	(((char *)w) - offsetof (struct my_biggy, t1));
1148	}
1149
1150	static void
1151	t2_cb (EV_P_ ev_timer *w, int revents)
1152	{
1153	struct my_biggy big = (struct my_biggy *
1154	(((char *)w) - offsetof (struct my_biggy, t2));
1155	}
1156		1548
1157		1549
1158	=head1 WATCHER TYPES	1550	=head1 WATCHER TYPES
1159		1551
1160	This section describes each watcher in detail, but will not repeat	1552	This section describes each watcher in detail, but will not repeat
…		…
1184	In general you can register as many read and/or write event watchers per	1576	In general you can register as many read and/or write event watchers per
1185	fd as you want (as long as you don't confuse yourself). Setting all file	1577	fd as you want (as long as you don't confuse yourself). Setting all file
1186	descriptors to non-blocking mode is also usually a good idea (but not	1578	descriptors to non-blocking mode is also usually a good idea (but not
1187	required if you know what you are doing).	1579	required if you know what you are doing).
1188		1580
1189	If you cannot use non-blocking mode, then force the use of a
1190	known-to-be-good backend (at the time of this writing, this includes only
1191	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>).
1192
1193	Another thing you have to watch out for is that it is quite easy to	1581	Another thing you have to watch out for is that it is quite easy to
1194	receive "spurious" readiness notifications, that is your callback might	1582	receive "spurious" readiness notifications, that is, your callback might
1195	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1583	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
1196	because there is no data. Not only are some backends known to create a	1584	because there is no data. It is very easy to get into this situation even
1197	lot of those (for example Solaris ports), it is very easy to get into	1585	with a relatively standard program structure. Thus it is best to always
1198	this situation even with a relatively standard program structure. Thus	1586	use non-blocking I/O: An extra C<read>(2) returning C<EAGAIN> is far
1199	it is best to always use non-blocking I/O: An extra C<read>(2) returning
1200	C<EAGAIN> is far preferable to a program hanging until some data arrives.	1587	preferable to a program hanging until some data arrives.
1201		1588
1202	If you cannot run the fd in non-blocking mode (for example you should	1589	If you cannot run the fd in non-blocking mode (for example you should
1203	not play around with an Xlib connection), then you have to separately	1590	not play around with an Xlib connection), then you have to separately
1204	re-test whether a file descriptor is really ready with a known-to-be good	1591	re-test whether a file descriptor is really ready with a known-to-be good
1205	interface such as poll (fortunately in our Xlib example, Xlib already	1592	interface such as poll (fortunately in the case of Xlib, it already does
1206	does this on its own, so its quite safe to use). Some people additionally	1593	this on its own, so its quite safe to use). Some people additionally
1207	use C<SIGALRM> and an interval timer, just to be sure you won't block	1594	use C<SIGALRM> and an interval timer, just to be sure you won't block
1208	indefinitely.	1595	indefinitely.
1209		1596
1210	But really, best use non-blocking mode.	1597	But really, best use non-blocking mode.
1211		1598
…		…
1239		1626
1240	There is no workaround possible except not registering events	1627	There is no workaround possible except not registering events
1241	for potentially C<dup ()>'ed file descriptors, or to resort to	1628	for potentially C<dup ()>'ed file descriptors, or to resort to
1242	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.	1629	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1243		1630
		1631	=head3 The special problem of files
		1632
		1633	Many people try to use C<select> (or libev) on file descriptors
		1634	representing files, and expect it to become ready when their program
		1635	doesn't block on disk accesses (which can take a long time on their own).
		1636
		1637	However, this cannot ever work in the "expected" way - you get a readiness
		1638	notification as soon as the kernel knows whether and how much data is
		1639	there, and in the case of open files, that's always the case, so you
		1640	always get a readiness notification instantly, and your read (or possibly
		1641	write) will still block on the disk I/O.
		1642
		1643	Another way to view it is that in the case of sockets, pipes, character
		1644	devices and so on, there is another party (the sender) that delivers data
		1645	on its own, but in the case of files, there is no such thing: the disk
		1646	will not send data on its own, simply because it doesn't know what you
		1647	wish to read - you would first have to request some data.
		1648
		1649	Since files are typically not-so-well supported by advanced notification
		1650	mechanism, libev tries hard to emulate POSIX behaviour with respect
		1651	to files, even though you should not use it. The reason for this is
		1652	convenience: sometimes you want to watch STDIN or STDOUT, which is
		1653	usually a tty, often a pipe, but also sometimes files or special devices
		1654	(for example, C<epoll> on Linux works with F</dev/random> but not with
		1655	F</dev/urandom>), and even though the file might better be served with
		1656	asynchronous I/O instead of with non-blocking I/O, it is still useful when
		1657	it "just works" instead of freezing.
		1658
		1659	So avoid file descriptors pointing to files when you know it (e.g. use
		1660	libeio), but use them when it is convenient, e.g. for STDIN/STDOUT, or
		1661	when you rarely read from a file instead of from a socket, and want to
		1662	reuse the same code path.
		1663
1244	=head3 The special problem of fork	1664	=head3 The special problem of fork
1245		1665
1246	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit	1666	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit
1247	useless behaviour. Libev fully supports fork, but needs to be told about	1667	useless behaviour. Libev fully supports fork, but needs to be told about
1248	it in the child.	1668	it in the child if you want to continue to use it in the child.
1249		1669
1250	To support fork in your programs, you either have to call	1670	To support fork in your child processes, you have to call C<ev_loop_fork
1251	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,	1671	()> after a fork in the child, enable C<EVFLAG_FORKCHECK>, or resort to
1252	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or	1672	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1253	C<EVBACKEND_POLL>.
1254		1673
1255	=head3 The special problem of SIGPIPE	1674	=head3 The special problem of SIGPIPE
1256		1675
1257	While not really specific to libev, it is easy to forget about C<SIGPIPE>:	1676	While not really specific to libev, it is easy to forget about C<SIGPIPE>:
1258	when writing to a pipe whose other end has been closed, your program gets	1677	when writing to a pipe whose other end has been closed, your program gets
…		…
1261		1680
1262	So when you encounter spurious, unexplained daemon exits, make sure you	1681	So when you encounter spurious, unexplained daemon exits, make sure you
1263	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon	1682	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
1264	somewhere, as that would have given you a big clue).	1683	somewhere, as that would have given you a big clue).
1265		1684
		1685	=head3 The special problem of accept()ing when you can't
		1686
		1687	Many implementations of the POSIX C<accept> function (for example,
		1688	found in post-2004 Linux) have the peculiar behaviour of not removing a
		1689	connection from the pending queue in all error cases.
		1690
		1691	For example, larger servers often run out of file descriptors (because
		1692	of resource limits), causing C<accept> to fail with C<ENFILE> but not
		1693	rejecting the connection, leading to libev signalling readiness on
		1694	the next iteration again (the connection still exists after all), and
		1695	typically causing the program to loop at 100% CPU usage.
		1696
		1697	Unfortunately, the set of errors that cause this issue differs between
		1698	operating systems, there is usually little the app can do to remedy the
		1699	situation, and no known thread-safe method of removing the connection to
		1700	cope with overload is known (to me).
		1701
		1702	One of the easiest ways to handle this situation is to just ignore it
		1703	- when the program encounters an overload, it will just loop until the
		1704	situation is over. While this is a form of busy waiting, no OS offers an
		1705	event-based way to handle this situation, so it's the best one can do.
		1706
		1707	A better way to handle the situation is to log any errors other than
		1708	C<EAGAIN> and C<EWOULDBLOCK>, making sure not to flood the log with such
		1709	messages, and continue as usual, which at least gives the user an idea of
		1710	what could be wrong ("raise the ulimit!"). For extra points one could stop
		1711	the C<ev_io> watcher on the listening fd "for a while", which reduces CPU
		1712	usage.
		1713
		1714	If your program is single-threaded, then you could also keep a dummy file
		1715	descriptor for overload situations (e.g. by opening F</dev/null>), and
		1716	when you run into C<ENFILE> or C<EMFILE>, close it, run C<accept>,
		1717	close that fd, and create a new dummy fd. This will gracefully refuse
		1718	clients under typical overload conditions.
		1719
		1720	The last way to handle it is to simply log the error and C<exit>, as
		1721	is often done with C<malloc> failures, but this results in an easy
		1722	opportunity for a DoS attack.
1266		1723
1267	=head3 Watcher-Specific Functions	1724	=head3 Watcher-Specific Functions
1268		1725
1269	=over 4	1726	=over 4
1270		1727
…		…
1302	...	1759	...
1303	struct ev_loop *loop = ev_default_init (0);	1760	struct ev_loop *loop = ev_default_init (0);
1304	ev_io stdin_readable;	1761	ev_io stdin_readable;
1305	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);	1762	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
1306	ev_io_start (loop, &stdin_readable);	1763	ev_io_start (loop, &stdin_readable);
1307	ev_loop (loop, 0);	1764	ev_run (loop, 0);
1308		1765
1309		1766
1310	=head2 C<ev_timer> - relative and optionally repeating timeouts	1767	=head2 C<ev_timer> - relative and optionally repeating timeouts
1311		1768
1312	Timer watchers are simple relative timers that generate an event after a	1769	Timer watchers are simple relative timers that generate an event after a
…		…
1317	year, it will still time out after (roughly) one hour. "Roughly" because	1774	year, it will still time out after (roughly) one hour. "Roughly" because
1318	detecting time jumps is hard, and some inaccuracies are unavoidable (the	1775	detecting time jumps is hard, and some inaccuracies are unavoidable (the
1319	monotonic clock option helps a lot here).	1776	monotonic clock option helps a lot here).
1320		1777
1321	The callback is guaranteed to be invoked only I<after> its timeout has	1778	The callback is guaranteed to be invoked only I<after> its timeout has
1322	passed, but if multiple timers become ready during the same loop iteration	1779	passed (not I<at>, so on systems with very low-resolution clocks this
1323	then order of execution is undefined.	1780	might introduce a small delay, see "the special problem of being too
		1781	early", below). If multiple timers become ready during the same loop
		1782	iteration then the ones with earlier time-out values are invoked before
		1783	ones of the same priority with later time-out values (but this is no
		1784	longer true when a callback calls C<ev_run> recursively).
1324		1785
1325	=head3 Be smart about timeouts	1786	=head3 Be smart about timeouts
1326		1787
1327	Many real-world problems involve some kind of timeout, usually for error	1788	Many real-world problems involve some kind of timeout, usually for error
1328	recovery. A typical example is an HTTP request - if the other side hangs,	1789	recovery. A typical example is an HTTP request - if the other side hangs,
…		…
1372	C<after> argument to C<ev_timer_set>, and only ever use the C<repeat>	1833	C<after> argument to C<ev_timer_set>, and only ever use the C<repeat>
1373	member and C<ev_timer_again>.	1834	member and C<ev_timer_again>.
1374		1835
1375	At start:	1836	At start:
1376		1837
1377	ev_timer_init (timer, callback);	1838	ev_init (timer, callback);
1378	timer->repeat = 60.;	1839	timer->repeat = 60.;
1379	ev_timer_again (loop, timer);	1840	ev_timer_again (loop, timer);
1380		1841
1381	Each time there is some activity:	1842	Each time there is some activity:
1382		1843
…		…
1403		1864
1404	In this case, it would be more efficient to leave the C<ev_timer> alone,	1865	In this case, it would be more efficient to leave the C<ev_timer> alone,
1405	but remember the time of last activity, and check for a real timeout only	1866	but remember the time of last activity, and check for a real timeout only
1406	within the callback:	1867	within the callback:
1407		1868
		1869	ev_tstamp timeout = 60.;
1408	ev_tstamp last_activity; // time of last activity	1870	ev_tstamp last_activity; // time of last activity
		1871	ev_timer timer;
1409		1872
1410	static void	1873	static void
1411	callback (EV_P_ ev_timer *w, int revents)	1874	callback (EV_P_ ev_timer *w, int revents)
1412	{	1875	{
1413	ev_tstamp now = ev_now (EV_A);	1876	// calculate when the timeout would happen
1414	ev_tstamp timeout = last_activity + 60.;	1877	ev_tstamp after = last_activity - ev_now (EV_A) + timeout;
1415		1878
1416	// if last_activity + 60. is older than now, we did time out	1879	// if negative, it means we the timeout already occured
1417	if (timeout < now)	1880	if (after < 0.)
1418	{	1881	{
1419	// timeout occured, take action	1882	// timeout occurred, take action
1420	}	1883	}
1421	else	1884	else
1422	{	1885	{
1423	// callback was invoked, but there was some activity, re-arm	1886	// callback was invoked, but there was some recent
1424	// the watcher to fire in last_activity + 60, which is	1887	// activity. simply restart the timer to time out
1425	// guaranteed to be in the future, so "again" is positive:	1888	// after "after" seconds, which is the earliest time
1426	w->repeat = timeout - now;	1889	// the timeout can occur.
		1890	ev_timer_set (w, after, 0.);
1427	ev_timer_again (EV_A_ w);	1891	ev_timer_start (EV_A_ w);
1428	}	1892	}
1429	}	1893	}
1430		1894
1431	To summarise the callback: first calculate the real timeout (defined	1895	To summarise the callback: first calculate in how many seconds the
1432	as "60 seconds after the last activity"), then check if that time has	1896	timeout will occur (by calculating the absolute time when it would occur,
1433	been reached, which means something I<did>, in fact, time out. Otherwise	1897	C<last_activity + timeout>, and subtracting the current time, C<ev_now
1434	the callback was invoked too early (C<timeout> is in the future), so	1898	(EV_A)> from that).
1435	re-schedule the timer to fire at that future time, to see if maybe we have
1436	a timeout then.
1437		1899
1438	Note how C<ev_timer_again> is used, taking advantage of the	1900	If this value is negative, then we are already past the timeout, i.e. we
1439	C<ev_timer_again> optimisation when the timer is already running.	1901	timed out, and need to do whatever is needed in this case.
		1902
		1903	Otherwise, we now the earliest time at which the timeout would trigger,
		1904	and simply start the timer with this timeout value.
		1905
		1906	In other words, each time the callback is invoked it will check whether
		1907	the timeout cocured. If not, it will simply reschedule itself to check
		1908	again at the earliest time it could time out. Rinse. Repeat.
1440		1909
1441	This scheme causes more callback invocations (about one every 60 seconds	1910	This scheme causes more callback invocations (about one every 60 seconds
1442	minus half the average time between activity), but virtually no calls to	1911	minus half the average time between activity), but virtually no calls to
1443	libev to change the timeout.	1912	libev to change the timeout.
1444		1913
1445	To start the timer, simply initialise the watcher and set C<last_activity>	1914	To start the machinery, simply initialise the watcher and set
1446	to the current time (meaning we just have some activity :), then call the	1915	C<last_activity> to the current time (meaning there was some activity just
1447	callback, which will "do the right thing" and start the timer:	1916	now), then call the callback, which will "do the right thing" and start
		1917	the timer:
1448		1918
		1919	last_activity = ev_now (EV_A);
1449	ev_timer_init (timer, callback);	1920	ev_init (&timer, callback);
1450	last_activity = ev_now (loop);	1921	callback (EV_A_ &timer, 0);
1451	callback (loop, timer, EV_TIMEOUT);
1452		1922
1453	And when there is some activity, simply store the current time in	1923	When there is some activity, simply store the current time in
1454	C<last_activity>, no libev calls at all:	1924	C<last_activity>, no libev calls at all:
1455		1925
		1926	if (activity detected)
1456	last_actiivty = ev_now (loop);	1927	last_activity = ev_now (EV_A);
		1928
		1929	When your timeout value changes, then the timeout can be changed by simply
		1930	providing a new value, stopping the timer and calling the callback, which
		1931	will agaion do the right thing (for example, time out immediately :).
		1932
		1933	timeout = new_value;
		1934	ev_timer_stop (EV_A_ &timer);
		1935	callback (EV_A_ &timer, 0);
1457		1936
1458	This technique is slightly more complex, but in most cases where the	1937	This technique is slightly more complex, but in most cases where the
1459	time-out is unlikely to be triggered, much more efficient.	1938	time-out is unlikely to be triggered, much more efficient.
1460
1461	Changing the timeout is trivial as well (if it isn't hard-coded in the
1462	callback :) - just change the timeout and invoke the callback, which will
1463	fix things for you.
1464		1939
1465	=item 4. Wee, just use a double-linked list for your timeouts.	1940	=item 4. Wee, just use a double-linked list for your timeouts.
1466		1941
1467	If there is not one request, but many thousands (millions...), all	1942	If there is not one request, but many thousands (millions...), all
1468	employing some kind of timeout with the same timeout value, then one can	1943	employing some kind of timeout with the same timeout value, then one can
…		…
1495	Method #1 is almost always a bad idea, and buys you nothing. Method #4 is	1970	Method #1 is almost always a bad idea, and buys you nothing. Method #4 is
1496	rather complicated, but extremely efficient, something that really pays	1971	rather complicated, but extremely efficient, something that really pays
1497	off after the first million or so of active timers, i.e. it's usually	1972	off after the first million or so of active timers, i.e. it's usually
1498	overkill :)	1973	overkill :)
1499		1974
		1975	=head3 The special problem of being too early
		1976
		1977	If you ask a timer to call your callback after three seconds, then
		1978	you expect it to be invoked after three seconds - but of course, this
		1979	cannot be guaranteed to infinite precision. Less obviously, it cannot be
		1980	guaranteed to any precision by libev - imagine somebody suspending the
		1981	process with a STOP signal for a few hours for example.
		1982
		1983	So, libev tries to invoke your callback as soon as possible I<after> the
		1984	delay has occurred, but cannot guarantee this.
		1985
		1986	A less obvious failure mode is calling your callback too early: many event
		1987	loops compare timestamps with a "elapsed delay >= requested delay", but
		1988	this can cause your callback to be invoked much earlier than you would
		1989	expect.
		1990
		1991	To see why, imagine a system with a clock that only offers full second
		1992	resolution (think windows if you can't come up with a broken enough OS
		1993	yourself). If you schedule a one-second timer at the time 500.9, then the
		1994	event loop will schedule your timeout to elapse at a system time of 500
		1995	(500.9 truncated to the resolution) + 1, or 501.
		1996
		1997	If an event library looks at the timeout 0.1s later, it will see "501 >=
		1998	501" and invoke the callback 0.1s after it was started, even though a
		1999	one-second delay was requested - this is being "too early", despite best
		2000	intentions.
		2001
		2002	This is the reason why libev will never invoke the callback if the elapsed
		2003	delay equals the requested delay, but only when the elapsed delay is
		2004	larger than the requested delay. In the example above, libev would only invoke
		2005	the callback at system time 502, or 1.1s after the timer was started.
		2006
		2007	So, while libev cannot guarantee that your callback will be invoked
		2008	exactly when requested, it I<can> and I<does> guarantee that the requested
		2009	delay has actually elapsed, or in other words, it always errs on the "too
		2010	late" side of things.
		2011
1500	=head3 The special problem of time updates	2012	=head3 The special problem of time updates
1501		2013
1502	Establishing the current time is a costly operation (it usually takes at	2014	Establishing the current time is a costly operation (it usually takes
1503	least two system calls): EV therefore updates its idea of the current	2015	at least one system call): EV therefore updates its idea of the current
1504	time only before and after C<ev_loop> collects new events, which causes a	2016	time only before and after C<ev_run> collects new events, which causes a
1505	growing difference between C<ev_now ()> and C<ev_time ()> when handling	2017	growing difference between C<ev_now ()> and C<ev_time ()> when handling
1506	lots of events in one iteration.	2018	lots of events in one iteration.
1507		2019
1508	The relative timeouts are calculated relative to the C<ev_now ()>	2020	The relative timeouts are calculated relative to the C<ev_now ()>
1509	time. This is usually the right thing as this timestamp refers to the time	2021	time. This is usually the right thing as this timestamp refers to the time
…		…
1515		2027
1516	If the event loop is suspended for a long time, you can also force an	2028	If the event loop is suspended for a long time, you can also force an
1517	update of the time returned by C<ev_now ()> by calling C<ev_now_update	2029	update of the time returned by C<ev_now ()> by calling C<ev_now_update
1518	()>.	2030	()>.
1519		2031
		2032	=head3 The special problem of unsynchronised clocks
		2033
		2034	Modern systems have a variety of clocks - libev itself uses the normal
		2035	"wall clock" clock and, if available, the monotonic clock (to avoid time
		2036	jumps).
		2037
		2038	Neither of these clocks is synchronised with each other or any other clock
		2039	on the system, so C<ev_time ()> might return a considerably different time
		2040	than C<gettimeofday ()> or C<time ()>. On a GNU/Linux system, for example,
		2041	a call to C<gettimeofday> might return a second count that is one higher
		2042	than a directly following call to C<time>.
		2043
		2044	The moral of this is to only compare libev-related timestamps with
		2045	C<ev_time ()> and C<ev_now ()>, at least if you want better precision than
		2046	a second or so.
		2047
		2048	One more problem arises due to this lack of synchronisation: if libev uses
		2049	the system monotonic clock and you compare timestamps from C<ev_time>
		2050	or C<ev_now> from when you started your timer and when your callback is
		2051	invoked, you will find that sometimes the callback is a bit "early".
		2052
		2053	This is because C<ev_timer>s work in real time, not wall clock time, so
		2054	libev makes sure your callback is not invoked before the delay happened,
		2055	I<measured according to the real time>, not the system clock.
		2056
		2057	If your timeouts are based on a physical timescale (e.g. "time out this
		2058	connection after 100 seconds") then this shouldn't bother you as it is
		2059	exactly the right behaviour.
		2060
		2061	If you want to compare wall clock/system timestamps to your timers, then
		2062	you need to use C<ev_periodic>s, as these are based on the wall clock
		2063	time, where your comparisons will always generate correct results.
		2064
		2065	=head3 The special problems of suspended animation
		2066
		2067	When you leave the server world it is quite customary to hit machines that
		2068	can suspend/hibernate - what happens to the clocks during such a suspend?
		2069
		2070	Some quick tests made with a Linux 2.6.28 indicate that a suspend freezes
		2071	all processes, while the clocks (C<times>, C<CLOCK_MONOTONIC>) continue
		2072	to run until the system is suspended, but they will not advance while the
		2073	system is suspended. That means, on resume, it will be as if the program
		2074	was frozen for a few seconds, but the suspend time will not be counted
		2075	towards C<ev_timer> when a monotonic clock source is used. The real time
		2076	clock advanced as expected, but if it is used as sole clocksource, then a
		2077	long suspend would be detected as a time jump by libev, and timers would
		2078	be adjusted accordingly.
		2079
		2080	I would not be surprised to see different behaviour in different between
		2081	operating systems, OS versions or even different hardware.
		2082
		2083	The other form of suspend (job control, or sending a SIGSTOP) will see a
		2084	time jump in the monotonic clocks and the realtime clock. If the program
		2085	is suspended for a very long time, and monotonic clock sources are in use,
		2086	then you can expect C<ev_timer>s to expire as the full suspension time
		2087	will be counted towards the timers. When no monotonic clock source is in
		2088	use, then libev will again assume a timejump and adjust accordingly.
		2089
		2090	It might be beneficial for this latter case to call C<ev_suspend>
		2091	and C<ev_resume> in code that handles C<SIGTSTP>, to at least get
		2092	deterministic behaviour in this case (you can do nothing against
		2093	C<SIGSTOP>).
		2094
1520	=head3 Watcher-Specific Functions and Data Members	2095	=head3 Watcher-Specific Functions and Data Members
1521		2096
1522	=over 4	2097	=over 4
1523		2098
1524	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	2099	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
…		…
1537	keep up with the timer (because it takes longer than those 10 seconds to	2112	keep up with the timer (because it takes longer than those 10 seconds to
1538	do stuff) the timer will not fire more than once per event loop iteration.	2113	do stuff) the timer will not fire more than once per event loop iteration.
1539		2114
1540	=item ev_timer_again (loop, ev_timer *)	2115	=item ev_timer_again (loop, ev_timer *)
1541		2116
1542	This will act as if the timer timed out and restart it again if it is	2117	This will act as if the timer timed out, and restarts it again if it is
1543	repeating. The exact semantics are:	2118	repeating. It basically works like calling C<ev_timer_stop>, updating the
		2119	timeout to the C<repeat> value and calling C<ev_timer_start>.
1544		2120
		2121	The exact semantics are as in the following rules, all of which will be
		2122	applied to the watcher:
		2123
		2124	=over 4
		2125
1545	If the timer is pending, its pending status is cleared.	2126	=item If the timer is pending, the pending status is always cleared.
1546		2127
1547	If the timer is started but non-repeating, stop it (as if it timed out).	2128	=item If the timer is started but non-repeating, stop it (as if it timed
		2129	out, without invoking it).
1548		2130
1549	If the timer is repeating, either start it if necessary (with the	2131	=item If the timer is repeating, make the C<repeat> value the new timeout
1550	C<repeat> value), or reset the running timer to the C<repeat> value.	2132	and start the timer, if necessary.
1551		2133
		2134	=back
		2135
1552	This sounds a bit complicated, see "Be smart about timeouts", above, for a	2136	This sounds a bit complicated, see L<Be smart about timeouts>, above, for a
1553	usage example.	2137	usage example.
		2138
		2139	=item ev_tstamp ev_timer_remaining (loop, ev_timer *)
		2140
		2141	Returns the remaining time until a timer fires. If the timer is active,
		2142	then this time is relative to the current event loop time, otherwise it's
		2143	the timeout value currently configured.
		2144
		2145	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns
		2146	C<5>. When the timer is started and one second passes, C<ev_timer_remaining>
		2147	will return C<4>. When the timer expires and is restarted, it will return
		2148	roughly C<7> (likely slightly less as callback invocation takes some time,
		2149	too), and so on.
1554		2150
1555	=item ev_tstamp repeat [read-write]	2151	=item ev_tstamp repeat [read-write]
1556		2152
1557	The current C<repeat> value. Will be used each time the watcher times out	2153	The current C<repeat> value. Will be used each time the watcher times out
1558	or C<ev_timer_again> is called, and determines the next timeout (if any),	2154	or C<ev_timer_again> is called, and determines the next timeout (if any),
…		…
1584	}	2180	}
1585		2181
1586	ev_timer mytimer;	2182	ev_timer mytimer;
1587	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */	2183	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
1588	ev_timer_again (&mytimer); /* start timer */	2184	ev_timer_again (&mytimer); /* start timer */
1589	ev_loop (loop, 0);	2185	ev_run (loop, 0);
1590		2186
1591	// and in some piece of code that gets executed on any "activity":	2187	// and in some piece of code that gets executed on any "activity":
1592	// reset the timeout to start ticking again at 10 seconds	2188	// reset the timeout to start ticking again at 10 seconds
1593	ev_timer_again (&mytimer);	2189	ev_timer_again (&mytimer);
1594		2190
…		…
1596	=head2 C<ev_periodic> - to cron or not to cron?	2192	=head2 C<ev_periodic> - to cron or not to cron?
1597		2193
1598	Periodic watchers are also timers of a kind, but they are very versatile	2194	Periodic watchers are also timers of a kind, but they are very versatile
1599	(and unfortunately a bit complex).	2195	(and unfortunately a bit complex).
1600		2196
1601	Unlike C<ev_timer>'s, they are not based on real time (or relative time)	2197	Unlike C<ev_timer>, periodic watchers are not based on real time (or
1602	but on wall clock time (absolute time). You can tell a periodic watcher	2198	relative time, the physical time that passes) but on wall clock time
1603	to trigger after some specific point in time. For example, if you tell a	2199	(absolute time, the thing you can read on your calender or clock). The
1604	periodic watcher to trigger in 10 seconds (by specifying e.g. C<ev_now ()	2200	difference is that wall clock time can run faster or slower than real
1605	+ 10.>, that is, an absolute time not a delay) and then reset your system	2201	time, and time jumps are not uncommon (e.g. when you adjust your
1606	clock to January of the previous year, then it will take more than year	2202	wrist-watch).
1607	to trigger the event (unlike an C<ev_timer>, which would still trigger
1608	roughly 10 seconds later as it uses a relative timeout).
1609		2203
		2204	You can tell a periodic watcher to trigger after some specific point
		2205	in time: for example, if you tell a periodic watcher to trigger "in 10
		2206	seconds" (by specifying e.g. C<ev_now () + 10.>, that is, an absolute time
		2207	not a delay) and then reset your system clock to January of the previous
		2208	year, then it will take a year or more to trigger the event (unlike an
		2209	C<ev_timer>, which would still trigger roughly 10 seconds after starting
		2210	it, as it uses a relative timeout).
		2211
1610	C<ev_periodic>s can also be used to implement vastly more complex timers,	2212	C<ev_periodic> watchers can also be used to implement vastly more complex
1611	such as triggering an event on each "midnight, local time", or other	2213	timers, such as triggering an event on each "midnight, local time", or
1612	complicated rules.	2214	other complicated rules. This cannot be done with C<ev_timer> watchers, as
		2215	those cannot react to time jumps.
1613		2216
1614	As with timers, the callback is guaranteed to be invoked only when the	2217	As with timers, the callback is guaranteed to be invoked only when the
1615	time (C<at>) has passed, but if multiple periodic timers become ready	2218	point in time where it is supposed to trigger has passed. If multiple
1616	during the same loop iteration, then order of execution is undefined.	2219	timers become ready during the same loop iteration then the ones with
		2220	earlier time-out values are invoked before ones with later time-out values
		2221	(but this is no longer true when a callback calls C<ev_run> recursively).
1617		2222
1618	=head3 Watcher-Specific Functions and Data Members	2223	=head3 Watcher-Specific Functions and Data Members
1619		2224
1620	=over 4	2225	=over 4
1621		2226
1622	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)	2227	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp offset, ev_tstamp interval, reschedule_cb)
1623		2228
1624	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)	2229	=item ev_periodic_set (ev_periodic *, ev_tstamp offset, ev_tstamp interval, reschedule_cb)
1625		2230
1626	Lots of arguments, lets sort it out... There are basically three modes of	2231	Lots of arguments, let's sort it out... There are basically three modes of
1627	operation, and we will explain them from simplest to most complex:	2232	operation, and we will explain them from simplest to most complex:
1628		2233
1629	=over 4	2234	=over 4
1630		2235
1631	=item * absolute timer (at = time, interval = reschedule_cb = 0)	2236	=item * absolute timer (offset = absolute time, interval = 0, reschedule_cb = 0)
1632		2237
1633	In this configuration the watcher triggers an event after the wall clock	2238	In this configuration the watcher triggers an event after the wall clock
1634	time C<at> has passed. It will not repeat and will not adjust when a time	2239	time C<offset> has passed. It will not repeat and will not adjust when a
1635	jump occurs, that is, if it is to be run at January 1st 2011 then it will	2240	time jump occurs, that is, if it is to be run at January 1st 2011 then it
1636	only run when the system clock reaches or surpasses this time.	2241	will be stopped and invoked when the system clock reaches or surpasses
		2242	this point in time.
1637		2243
1638	=item * repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)	2244	=item * repeating interval timer (offset = offset within interval, interval > 0, reschedule_cb = 0)
1639		2245
1640	In this mode the watcher will always be scheduled to time out at the next	2246	In this mode the watcher will always be scheduled to time out at the next
1641	C<at + N * interval> time (for some integer N, which can also be negative)	2247	C<offset + N * interval> time (for some integer N, which can also be
1642	and then repeat, regardless of any time jumps.	2248	negative) and then repeat, regardless of any time jumps. The C<offset>
		2249	argument is merely an offset into the C<interval> periods.
1643		2250
1644	This can be used to create timers that do not drift with respect to the	2251	This can be used to create timers that do not drift with respect to the
1645	system clock, for example, here is a C<ev_periodic> that triggers each	2252	system clock, for example, here is an C<ev_periodic> that triggers each
1646	hour, on the hour:	2253	hour, on the hour (with respect to UTC):
1647		2254
1648	ev_periodic_set (&periodic, 0., 3600., 0);	2255	ev_periodic_set (&periodic, 0., 3600., 0);
1649		2256
1650	This doesn't mean there will always be 3600 seconds in between triggers,	2257	This doesn't mean there will always be 3600 seconds in between triggers,
1651	but only that the callback will be called when the system time shows a	2258	but only that the callback will be called when the system time shows a
1652	full hour (UTC), or more correctly, when the system time is evenly divisible	2259	full hour (UTC), or more correctly, when the system time is evenly divisible
1653	by 3600.	2260	by 3600.
1654		2261
1655	Another way to think about it (for the mathematically inclined) is that	2262	Another way to think about it (for the mathematically inclined) is that
1656	C<ev_periodic> will try to run the callback in this mode at the next possible	2263	C<ev_periodic> will try to run the callback in this mode at the next possible
1657	time where C<time = at (mod interval)>, regardless of any time jumps.	2264	time where C<time = offset (mod interval)>, regardless of any time jumps.
1658		2265
1659	For numerical stability it is preferable that the C<at> value is near	2266	The C<interval> I<MUST> be positive, and for numerical stability, the
1660	C<ev_now ()> (the current time), but there is no range requirement for	2267	interval value should be higher than C<1/8192> (which is around 100
1661	this value, and in fact is often specified as zero.	2268	microseconds) and C<offset> should be higher than C<0> and should have
		2269	at most a similar magnitude as the current time (say, within a factor of
		2270	ten). Typical values for offset are, in fact, C<0> or something between
		2271	C<0> and C<interval>, which is also the recommended range.
1662		2272
1663	Note also that there is an upper limit to how often a timer can fire (CPU	2273	Note also that there is an upper limit to how often a timer can fire (CPU
1664	speed for example), so if C<interval> is very small then timing stability	2274	speed for example), so if C<interval> is very small then timing stability
1665	will of course deteriorate. Libev itself tries to be exact to be about one	2275	will of course deteriorate. Libev itself tries to be exact to be about one
1666	millisecond (if the OS supports it and the machine is fast enough).	2276	millisecond (if the OS supports it and the machine is fast enough).
1667		2277
1668	=item * manual reschedule mode (at and interval ignored, reschedule_cb = callback)	2278	=item * manual reschedule mode (offset ignored, interval ignored, reschedule_cb = callback)
1669		2279
1670	In this mode the values for C<interval> and C<at> are both being	2280	In this mode the values for C<interval> and C<offset> are both being
1671	ignored. Instead, each time the periodic watcher gets scheduled, the	2281	ignored. Instead, each time the periodic watcher gets scheduled, the
1672	reschedule callback will be called with the watcher as first, and the	2282	reschedule callback will be called with the watcher as first, and the
1673	current time as second argument.	2283	current time as second argument.
1674		2284
1675	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,	2285	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher, ever,
1676	ever, or make ANY event loop modifications whatsoever>.	2286	or make ANY other event loop modifications whatsoever, unless explicitly
		2287	allowed by documentation here>.
1677		2288
1678	If you need to stop it, return C<now + 1e30> (or so, fudge fudge) and stop	2289	If you need to stop it, return C<now + 1e30> (or so, fudge fudge) and stop
1679	it afterwards (e.g. by starting an C<ev_prepare> watcher, which is the	2290	it afterwards (e.g. by starting an C<ev_prepare> watcher, which is the
1680	only event loop modification you are allowed to do).	2291	only event loop modification you are allowed to do).
1681		2292
…		…
1711	a different time than the last time it was called (e.g. in a crond like	2322	a different time than the last time it was called (e.g. in a crond like
1712	program when the crontabs have changed).	2323	program when the crontabs have changed).
1713		2324
1714	=item ev_tstamp ev_periodic_at (ev_periodic *)	2325	=item ev_tstamp ev_periodic_at (ev_periodic *)
1715		2326
1716	When active, returns the absolute time that the watcher is supposed to	2327	When active, returns the absolute time that the watcher is supposed
1717	trigger next.	2328	to trigger next. This is not the same as the C<offset> argument to
		2329	C<ev_periodic_set>, but indeed works even in interval and manual
		2330	rescheduling modes.
1718		2331
1719	=item ev_tstamp offset [read-write]	2332	=item ev_tstamp offset [read-write]
1720		2333
1721	When repeating, this contains the offset value, otherwise this is the	2334	When repeating, this contains the offset value, otherwise this is the
1722	absolute point in time (the C<at> value passed to C<ev_periodic_set>).	2335	absolute point in time (the C<offset> value passed to C<ev_periodic_set>,
		2336	although libev might modify this value for better numerical stability).
1723		2337
1724	Can be modified any time, but changes only take effect when the periodic	2338	Can be modified any time, but changes only take effect when the periodic
1725	timer fires or C<ev_periodic_again> is being called.	2339	timer fires or C<ev_periodic_again> is being called.
1726		2340
1727	=item ev_tstamp interval [read-write]	2341	=item ev_tstamp interval [read-write]
…		…
1743	Example: Call a callback every hour, or, more precisely, whenever the	2357	Example: Call a callback every hour, or, more precisely, whenever the
1744	system time is divisible by 3600. The callback invocation times have	2358	system time is divisible by 3600. The callback invocation times have
1745	potentially a lot of jitter, but good long-term stability.	2359	potentially a lot of jitter, but good long-term stability.
1746		2360
1747	static void	2361	static void
1748	clock_cb (struct ev_loop *loop, ev_io *w, int revents)	2362	clock_cb (struct ev_loop *loop, ev_periodic *w, int revents)
1749	{	2363	{
1750	... its now a full hour (UTC, or TAI or whatever your clock follows)	2364	... its now a full hour (UTC, or TAI or whatever your clock follows)
1751	}	2365	}
1752		2366
1753	ev_periodic hourly_tick;	2367	ev_periodic hourly_tick;
…		…
1776		2390
1777	=head2 C<ev_signal> - signal me when a signal gets signalled!	2391	=head2 C<ev_signal> - signal me when a signal gets signalled!
1778		2392
1779	Signal watchers will trigger an event when the process receives a specific	2393	Signal watchers will trigger an event when the process receives a specific
1780	signal one or more times. Even though signals are very asynchronous, libev	2394	signal one or more times. Even though signals are very asynchronous, libev
1781	will try it's best to deliver signals synchronously, i.e. as part of the	2395	will try its best to deliver signals synchronously, i.e. as part of the
1782	normal event processing, like any other event.	2396	normal event processing, like any other event.
1783		2397
1784	If you want signals asynchronously, just use C<sigaction> as you would	2398	If you want signals to be delivered truly asynchronously, just use
1785	do without libev and forget about sharing the signal. You can even use	2399	C<sigaction> as you would do without libev and forget about sharing
1786	C<ev_async> from a signal handler to synchronously wake up an event loop.	2400	the signal. You can even use C<ev_async> from a signal handler to
		2401	synchronously wake up an event loop.
1787		2402
1788	You can configure as many watchers as you like per signal. Only when the	2403	You can configure as many watchers as you like for the same signal, but
		2404	only within the same loop, i.e. you can watch for C<SIGINT> in your
		2405	default loop and for C<SIGIO> in another loop, but you cannot watch for
		2406	C<SIGINT> in both the default loop and another loop at the same time. At
		2407	the moment, C<SIGCHLD> is permanently tied to the default loop.
		2408
1789	first watcher gets started will libev actually register a signal handler	2409	When the first watcher gets started will libev actually register something
1790	with the kernel (thus it coexists with your own signal handlers as long as	2410	with the kernel (thus it coexists with your own signal handlers as long as
1791	you don't register any with libev for the same signal). Similarly, when	2411	you don't register any with libev for the same signal).
1792	the last signal watcher for a signal is stopped, libev will reset the
1793	signal handler to SIG_DFL (regardless of what it was set to before).
1794		2412
1795	If possible and supported, libev will install its handlers with	2413	If possible and supported, libev will install its handlers with
1796	C<SA_RESTART> behaviour enabled, so system calls should not be unduly	2414	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should
1797	interrupted. If you have a problem with system calls getting interrupted by	2415	not be unduly interrupted. If you have a problem with system calls getting
1798	signals you can block all signals in an C<ev_check> watcher and unblock	2416	interrupted by signals you can block all signals in an C<ev_check> watcher
1799	them in an C<ev_prepare> watcher.	2417	and unblock them in an C<ev_prepare> watcher.
		2418
		2419	=head3 The special problem of inheritance over fork/execve/pthread_create
		2420
		2421	Both the signal mask (C<sigprocmask>) and the signal disposition
		2422	(C<sigaction>) are unspecified after starting a signal watcher (and after
		2423	stopping it again), that is, libev might or might not block the signal,
		2424	and might or might not set or restore the installed signal handler (but
		2425	see C<EVFLAG_NOSIGMASK>).
		2426
		2427	While this does not matter for the signal disposition (libev never
		2428	sets signals to C<SIG_IGN>, so handlers will be reset to C<SIG_DFL> on
		2429	C<execve>), this matters for the signal mask: many programs do not expect
		2430	certain signals to be blocked.
		2431
		2432	This means that before calling C<exec> (from the child) you should reset
		2433	the signal mask to whatever "default" you expect (all clear is a good
		2434	choice usually).
		2435
		2436	The simplest way to ensure that the signal mask is reset in the child is
		2437	to install a fork handler with C<pthread_atfork> that resets it. That will
		2438	catch fork calls done by libraries (such as the libc) as well.
		2439
		2440	In current versions of libev, the signal will not be blocked indefinitely
		2441	unless you use the C<signalfd> API (C<EV_SIGNALFD>). While this reduces
		2442	the window of opportunity for problems, it will not go away, as libev
		2443	I<has> to modify the signal mask, at least temporarily.
		2444
		2445	So I can't stress this enough: I<If you do not reset your signal mask when
		2446	you expect it to be empty, you have a race condition in your code>. This
		2447	is not a libev-specific thing, this is true for most event libraries.
		2448
		2449	=head3 The special problem of threads signal handling
		2450
		2451	POSIX threads has problematic signal handling semantics, specifically,
		2452	a lot of functionality (sigfd, sigwait etc.) only really works if all
		2453	threads in a process block signals, which is hard to achieve.
		2454
		2455	When you want to use sigwait (or mix libev signal handling with your own
		2456	for the same signals), you can tackle this problem by globally blocking
		2457	all signals before creating any threads (or creating them with a fully set
		2458	sigprocmask) and also specifying the C<EVFLAG_NOSIGMASK> when creating
		2459	loops. Then designate one thread as "signal receiver thread" which handles
		2460	these signals. You can pass on any signals that libev might be interested
		2461	in by calling C<ev_feed_signal>.
1800		2462
1801	=head3 Watcher-Specific Functions and Data Members	2463	=head3 Watcher-Specific Functions and Data Members
1802		2464
1803	=over 4	2465	=over 4
1804		2466
…		…
1820	Example: Try to exit cleanly on SIGINT.	2482	Example: Try to exit cleanly on SIGINT.
1821		2483
1822	static void	2484	static void
1823	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)	2485	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)
1824	{	2486	{
1825	ev_unloop (loop, EVUNLOOP_ALL);	2487	ev_break (loop, EVBREAK_ALL);
1826	}	2488	}
1827		2489
1828	ev_signal signal_watcher;	2490	ev_signal signal_watcher;
1829	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	2491	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
1830	ev_signal_start (loop, &signal_watcher);	2492	ev_signal_start (loop, &signal_watcher);
…		…
1836	some child status changes (most typically when a child of yours dies or	2498	some child status changes (most typically when a child of yours dies or
1837	exits). It is permissible to install a child watcher I<after> the child	2499	exits). It is permissible to install a child watcher I<after> the child
1838	has been forked (which implies it might have already exited), as long	2500	has been forked (which implies it might have already exited), as long
1839	as the event loop isn't entered (or is continued from a watcher), i.e.,	2501	as the event loop isn't entered (or is continued from a watcher), i.e.,
1840	forking and then immediately registering a watcher for the child is fine,	2502	forking and then immediately registering a watcher for the child is fine,
1841	but forking and registering a watcher a few event loop iterations later is	2503	but forking and registering a watcher a few event loop iterations later or
1842	not.	2504	in the next callback invocation is not.
1843		2505
1844	Only the default event loop is capable of handling signals, and therefore	2506	Only the default event loop is capable of handling signals, and therefore
1845	you can only register child watchers in the default event loop.	2507	you can only register child watchers in the default event loop.
1846		2508
		2509	Due to some design glitches inside libev, child watchers will always be
		2510	handled at maximum priority (their priority is set to C<EV_MAXPRI> by
		2511	libev)
		2512
1847	=head3 Process Interaction	2513	=head3 Process Interaction
1848		2514
1849	Libev grabs C<SIGCHLD> as soon as the default event loop is	2515	Libev grabs C<SIGCHLD> as soon as the default event loop is
1850	initialised. This is necessary to guarantee proper behaviour even if	2516	initialised. This is necessary to guarantee proper behaviour even if the
1851	the first child watcher is started after the child exits. The occurrence	2517	first child watcher is started after the child exits. The occurrence
1852	of C<SIGCHLD> is recorded asynchronously, but child reaping is done	2518	of C<SIGCHLD> is recorded asynchronously, but child reaping is done
1853	synchronously as part of the event loop processing. Libev always reaps all	2519	synchronously as part of the event loop processing. Libev always reaps all
1854	children, even ones not watched.	2520	children, even ones not watched.
1855		2521
1856	=head3 Overriding the Built-In Processing	2522	=head3 Overriding the Built-In Processing
…		…
1866	=head3 Stopping the Child Watcher	2532	=head3 Stopping the Child Watcher
1867		2533
1868	Currently, the child watcher never gets stopped, even when the	2534	Currently, the child watcher never gets stopped, even when the
1869	child terminates, so normally one needs to stop the watcher in the	2535	child terminates, so normally one needs to stop the watcher in the
1870	callback. Future versions of libev might stop the watcher automatically	2536	callback. Future versions of libev might stop the watcher automatically
1871	when a child exit is detected.	2537	when a child exit is detected (calling C<ev_child_stop> twice is not a
		2538	problem).
1872		2539
1873	=head3 Watcher-Specific Functions and Data Members	2540	=head3 Watcher-Specific Functions and Data Members
1874		2541
1875	=over 4	2542	=over 4
1876		2543
…		…
2179		2846
2180	=head3 Watcher-Specific Functions and Data Members	2847	=head3 Watcher-Specific Functions and Data Members
2181		2848
2182	=over 4	2849	=over 4
2183		2850
2184	=item ev_idle_init (ev_signal *, callback)	2851	=item ev_idle_init (ev_idle *, callback)
2185		2852
2186	Initialises and configures the idle watcher - it has no parameters of any	2853	Initialises and configures the idle watcher - it has no parameters of any
2187	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,	2854	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,
2188	believe me.	2855	believe me.
2189		2856
…		…
2202	// no longer anything immediate to do.	2869	// no longer anything immediate to do.
2203	}	2870	}
2204		2871
2205	ev_idle *idle_watcher = malloc (sizeof (ev_idle));	2872	ev_idle *idle_watcher = malloc (sizeof (ev_idle));
2206	ev_idle_init (idle_watcher, idle_cb);	2873	ev_idle_init (idle_watcher, idle_cb);
2207	ev_idle_start (loop, idle_cb);	2874	ev_idle_start (loop, idle_watcher);
2208		2875
2209		2876
2210	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!	2877	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!
2211		2878
2212	Prepare and check watchers are usually (but not always) used in pairs:	2879	Prepare and check watchers are usually (but not always) used in pairs:
2213	prepare watchers get invoked before the process blocks and check watchers	2880	prepare watchers get invoked before the process blocks and check watchers
2214	afterwards.	2881	afterwards.
2215		2882
2216	You I<must not> call C<ev_loop> or similar functions that enter	2883	You I<must not> call C<ev_run> or similar functions that enter
2217	the current event loop from either C<ev_prepare> or C<ev_check>	2884	the current event loop from either C<ev_prepare> or C<ev_check>
2218	watchers. Other loops than the current one are fine, however. The	2885	watchers. Other loops than the current one are fine, however. The
2219	rationale behind this is that you do not need to check for recursion in	2886	rationale behind this is that you do not need to check for recursion in
2220	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,	2887	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,
2221	C<ev_check> so if you have one watcher of each kind they will always be	2888	C<ev_check> so if you have one watcher of each kind they will always be
…		…
2305	struct pollfd fds [nfd];	2972	struct pollfd fds [nfd];
2306	// actual code will need to loop here and realloc etc.	2973	// actual code will need to loop here and realloc etc.
2307	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));	2974	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
2308		2975
2309	/* the callback is illegal, but won't be called as we stop during check */	2976	/* the callback is illegal, but won't be called as we stop during check */
2310	ev_timer_init (&tw, 0, timeout * 1e-3);	2977	ev_timer_init (&tw, 0, timeout * 1e-3, 0.);
2311	ev_timer_start (loop, &tw);	2978	ev_timer_start (loop, &tw);
2312		2979
2313	// create one ev_io per pollfd	2980	// create one ev_io per pollfd
2314	for (int i = 0; i < nfd; ++i)	2981	for (int i = 0; i < nfd; ++i)
2315	{	2982	{
…		…
2389		3056
2390	if (timeout >= 0)	3057	if (timeout >= 0)
2391	// create/start timer	3058	// create/start timer
2392		3059
2393	// poll	3060	// poll
2394	ev_loop (EV_A_ 0);	3061	ev_run (EV_A_ 0);
2395		3062
2396	// stop timer again	3063	// stop timer again
2397	if (timeout >= 0)	3064	if (timeout >= 0)
2398	ev_timer_stop (EV_A_ &to);	3065	ev_timer_stop (EV_A_ &to);
2399		3066
…		…
2477	if you do not want that, you need to temporarily stop the embed watcher).	3144	if you do not want that, you need to temporarily stop the embed watcher).
2478		3145
2479	=item ev_embed_sweep (loop, ev_embed *)	3146	=item ev_embed_sweep (loop, ev_embed *)
2480		3147
2481	Make a single, non-blocking sweep over the embedded loop. This works	3148	Make a single, non-blocking sweep over the embedded loop. This works
2482	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	3149	similarly to C<ev_run (embedded_loop, EVRUN_NOWAIT)>, but in the most
2483	appropriate way for embedded loops.	3150	appropriate way for embedded loops.
2484		3151
2485	=item struct ev_loop *other [read-only]	3152	=item struct ev_loop *other [read-only]
2486		3153
2487	The embedded event loop.	3154	The embedded event loop.
…		…
2545	event loop blocks next and before C<ev_check> watchers are being called,	3212	event loop blocks next and before C<ev_check> watchers are being called,
2546	and only in the child after the fork. If whoever good citizen calling	3213	and only in the child after the fork. If whoever good citizen calling
2547	C<ev_default_fork> cheats and calls it in the wrong process, the fork	3214	C<ev_default_fork> cheats and calls it in the wrong process, the fork
2548	handlers will be invoked, too, of course.	3215	handlers will be invoked, too, of course.
2549		3216
		3217	=head3 The special problem of life after fork - how is it possible?
		3218
		3219	Most uses of C<fork()> consist of forking, then some simple calls to set
		3220	up/change the process environment, followed by a call to C<exec()>. This
		3221	sequence should be handled by libev without any problems.
		3222
		3223	This changes when the application actually wants to do event handling
		3224	in the child, or both parent in child, in effect "continuing" after the
		3225	fork.
		3226
		3227	The default mode of operation (for libev, with application help to detect
		3228	forks) is to duplicate all the state in the child, as would be expected
		3229	when I<either> the parent I<or> the child process continues.
		3230
		3231	When both processes want to continue using libev, then this is usually the
		3232	wrong result. In that case, usually one process (typically the parent) is
		3233	supposed to continue with all watchers in place as before, while the other
		3234	process typically wants to start fresh, i.e. without any active watchers.
		3235
		3236	The cleanest and most efficient way to achieve that with libev is to
		3237	simply create a new event loop, which of course will be "empty", and
		3238	use that for new watchers. This has the advantage of not touching more
		3239	memory than necessary, and thus avoiding the copy-on-write, and the
		3240	disadvantage of having to use multiple event loops (which do not support
		3241	signal watchers).
		3242
		3243	When this is not possible, or you want to use the default loop for
		3244	other reasons, then in the process that wants to start "fresh", call
		3245	C<ev_loop_destroy (EV_DEFAULT)> followed by C<ev_default_loop (...)>.
		3246	Destroying the default loop will "orphan" (not stop) all registered
		3247	watchers, so you have to be careful not to execute code that modifies
		3248	those watchers. Note also that in that case, you have to re-register any
		3249	signal watchers.
		3250
2550	=head3 Watcher-Specific Functions and Data Members	3251	=head3 Watcher-Specific Functions and Data Members
2551		3252
2552	=over 4	3253	=over 4
2553		3254
2554	=item ev_fork_init (ev_signal *, callback)	3255	=item ev_fork_init (ev_fork *, callback)
2555		3256
2556	Initialises and configures the fork watcher - it has no parameters of any	3257	Initialises and configures the fork watcher - it has no parameters of any
2557	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	3258	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
2558	believe me.	3259	really.
2559		3260
2560	=back	3261	=back
2561		3262
2562		3263
		3264	=head2 C<ev_cleanup> - even the best things end
		3265
		3266	Cleanup watchers are called just before the event loop is being destroyed
		3267	by a call to C<ev_loop_destroy>.
		3268
		3269	While there is no guarantee that the event loop gets destroyed, cleanup
		3270	watchers provide a convenient method to install cleanup hooks for your
		3271	program, worker threads and so on - you just to make sure to destroy the
		3272	loop when you want them to be invoked.
		3273
		3274	Cleanup watchers are invoked in the same way as any other watcher. Unlike
		3275	all other watchers, they do not keep a reference to the event loop (which
		3276	makes a lot of sense if you think about it). Like all other watchers, you
		3277	can call libev functions in the callback, except C<ev_cleanup_start>.
		3278
		3279	=head3 Watcher-Specific Functions and Data Members
		3280
		3281	=over 4
		3282
		3283	=item ev_cleanup_init (ev_cleanup *, callback)
		3284
		3285	Initialises and configures the cleanup watcher - it has no parameters of
		3286	any kind. There is a C<ev_cleanup_set> macro, but using it is utterly
		3287	pointless, I assure you.
		3288
		3289	=back
		3290
		3291	Example: Register an atexit handler to destroy the default loop, so any
		3292	cleanup functions are called.
		3293
		3294	static void
		3295	program_exits (void)
		3296	{
		3297	ev_loop_destroy (EV_DEFAULT_UC);
		3298	}
		3299
		3300	...
		3301	atexit (program_exits);
		3302
		3303
2563	=head2 C<ev_async> - how to wake up another event loop	3304	=head2 C<ev_async> - how to wake up an event loop
2564		3305
2565	In general, you cannot use an C<ev_loop> from multiple threads or other	3306	In general, you cannot use an C<ev_loop> from multiple threads or other
2566	asynchronous sources such as signal handlers (as opposed to multiple event	3307	asynchronous sources such as signal handlers (as opposed to multiple event
2567	loops - those are of course safe to use in different threads).	3308	loops - those are of course safe to use in different threads).
2568		3309
2569	Sometimes, however, you need to wake up another event loop you do not	3310	Sometimes, however, you need to wake up an event loop you do not control,
2570	control, for example because it belongs to another thread. This is what	3311	for example because it belongs to another thread. This is what C<ev_async>
2571	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you	3312	watchers do: as long as the C<ev_async> watcher is active, you can signal
2572	can signal it by calling C<ev_async_send>, which is thread- and signal	3313	it by calling C<ev_async_send>, which is thread- and signal safe.
2573	safe.
2574		3314
2575	This functionality is very similar to C<ev_signal> watchers, as signals,	3315	This functionality is very similar to C<ev_signal> watchers, as signals,
2576	too, are asynchronous in nature, and signals, too, will be compressed	3316	too, are asynchronous in nature, and signals, too, will be compressed
2577	(i.e. the number of callback invocations may be less than the number of	3317	(i.e. the number of callback invocations may be less than the number of
2578	C<ev_async_sent> calls).	3318	C<ev_async_sent> calls). In fact, you could use signal watchers as a kind
2579		3319	of "global async watchers" by using a watcher on an otherwise unused
2580	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not	3320	signal, and C<ev_feed_signal> to signal this watcher from another thread,
2581	just the default loop.	3321	even without knowing which loop owns the signal.
2582		3322
2583	=head3 Queueing	3323	=head3 Queueing
2584		3324
2585	C<ev_async> does not support queueing of data in any way. The reason	3325	C<ev_async> does not support queueing of data in any way. The reason
2586	is that the author does not know of a simple (or any) algorithm for a	3326	is that the author does not know of a simple (or any) algorithm for a
2587	multiple-writer-single-reader queue that works in all cases and doesn't	3327	multiple-writer-single-reader queue that works in all cases and doesn't
2588	need elaborate support such as pthreads.	3328	need elaborate support such as pthreads or unportable memory access
		3329	semantics.
2589		3330
2590	That means that if you want to queue data, you have to provide your own	3331	That means that if you want to queue data, you have to provide your own
2591	queue. But at least I can tell you how to implement locking around your	3332	queue. But at least I can tell you how to implement locking around your
2592	queue:	3333	queue:
2593		3334
…		…
2677	trust me.	3418	trust me.
2678		3419
2679	=item ev_async_send (loop, ev_async *)	3420	=item ev_async_send (loop, ev_async *)
2680		3421
2681	Sends/signals/activates the given C<ev_async> watcher, that is, feeds	3422	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
2682	an C<EV_ASYNC> event on the watcher into the event loop. Unlike	3423	an C<EV_ASYNC> event on the watcher into the event loop, and instantly
		3424	returns.
		3425
2683	C<ev_feed_event>, this call is safe to do from other threads, signal or	3426	Unlike C<ev_feed_event>, this call is safe to do from other threads,
2684	similar contexts (see the discussion of C<EV_ATOMIC_T> in the embedding	3427	signal or similar contexts (see the discussion of C<EV_ATOMIC_T> in the
2685	section below on what exactly this means).	3428	embedding section below on what exactly this means).
2686		3429
2687	This call incurs the overhead of a system call only once per loop iteration,	3430	Note that, as with other watchers in libev, multiple events might get
2688	so while the overhead might be noticeable, it doesn't apply to repeated	3431	compressed into a single callback invocation (another way to look at
2689	calls to C<ev_async_send>.	3432	this is that C<ev_async> watchers are level-triggered: they are set on
		3433	C<ev_async_send>, reset when the event loop detects that).
		3434
		3435	This call incurs the overhead of at most one extra system call per event
		3436	loop iteration, if the event loop is blocked, and no syscall at all if
		3437	the event loop (or your program) is processing events. That means that
		3438	repeated calls are basically free (there is no need to avoid calls for
		3439	performance reasons) and that the overhead becomes smaller (typically
		3440	zero) under load.
2690		3441
2691	=item bool = ev_async_pending (ev_async *)	3442	=item bool = ev_async_pending (ev_async *)
2692		3443
2693	Returns a non-zero value when C<ev_async_send> has been called on the	3444	Returns a non-zero value when C<ev_async_send> has been called on the
2694	watcher but the event has not yet been processed (or even noted) by the	3445	watcher but the event has not yet been processed (or even noted) by the
…		…
2697	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When	3448	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When
2698	the loop iterates next and checks for the watcher to have become active,	3449	the loop iterates next and checks for the watcher to have become active,
2699	it will reset the flag again. C<ev_async_pending> can be used to very	3450	it will reset the flag again. C<ev_async_pending> can be used to very
2700	quickly check whether invoking the loop might be a good idea.	3451	quickly check whether invoking the loop might be a good idea.
2701		3452
2702	Not that this does I<not> check whether the watcher itself is pending, only	3453	Not that this does I<not> check whether the watcher itself is pending,
2703	whether it has been requested to make this watcher pending.	3454	only whether it has been requested to make this watcher pending: there
		3455	is a time window between the event loop checking and resetting the async
		3456	notification, and the callback being invoked.
2704		3457
2705	=back	3458	=back
2706		3459
2707		3460
2708	=head1 OTHER FUNCTIONS	3461	=head1 OTHER FUNCTIONS
…		…
2725		3478
2726	If C<timeout> is less than 0, then no timeout watcher will be	3479	If C<timeout> is less than 0, then no timeout watcher will be
2727	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and	3480	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
2728	repeat = 0) will be started. C<0> is a valid timeout.	3481	repeat = 0) will be started. C<0> is a valid timeout.
2729		3482
2730	The callback has the type C<void (*cb)(int revents, void *arg)> and gets	3483	The callback has the type C<void (*cb)(int revents, void *arg)> and is
2731	passed an C<revents> set like normal event callbacks (a combination of	3484	passed an C<revents> set like normal event callbacks (a combination of
2732	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>	3485	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMER>) and the C<arg>
2733	value passed to C<ev_once>. Note that it is possible to receive I<both>	3486	value passed to C<ev_once>. Note that it is possible to receive I<both>
2734	a timeout and an io event at the same time - you probably should give io	3487	a timeout and an io event at the same time - you probably should give io
2735	events precedence.	3488	events precedence.
2736		3489
2737	Example: wait up to ten seconds for data to appear on STDIN_FILENO.	3490	Example: wait up to ten seconds for data to appear on STDIN_FILENO.
2738		3491
2739	static void stdin_ready (int revents, void *arg)	3492	static void stdin_ready (int revents, void *arg)
2740	{	3493	{
2741	if (revents & EV_READ)	3494	if (revents & EV_READ)
2742	/* stdin might have data for us, joy! */;	3495	/* stdin might have data for us, joy! */;
2743	else if (revents & EV_TIMEOUT)	3496	else if (revents & EV_TIMER)
2744	/* doh, nothing entered */;	3497	/* doh, nothing entered */;
2745	}	3498	}
2746		3499
2747	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	3500	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
2748		3501
2749	=item ev_feed_event (struct ev_loop *, watcher *, int revents)
2750
2751	Feeds the given event set into the event loop, as if the specified event
2752	had happened for the specified watcher (which must be a pointer to an
2753	initialised but not necessarily started event watcher).
2754
2755	=item ev_feed_fd_event (struct ev_loop *, int fd, int revents)	3502	=item ev_feed_fd_event (loop, int fd, int revents)
2756		3503
2757	Feed an event on the given fd, as if a file descriptor backend detected	3504	Feed an event on the given fd, as if a file descriptor backend detected
2758	the given events it.	3505	the given events.
2759		3506
2760	=item ev_feed_signal_event (struct ev_loop *loop, int signum)	3507	=item ev_feed_signal_event (loop, int signum)
2761		3508
2762	Feed an event as if the given signal occurred (C<loop> must be the default	3509	Feed an event as if the given signal occurred. See also C<ev_feed_signal>,
2763	loop!).	3510	which is async-safe.
2764		3511
2765	=back	3512	=back
		3513
		3514
		3515	=head1 COMMON OR USEFUL IDIOMS (OR BOTH)
		3516
		3517	This section explains some common idioms that are not immediately
		3518	obvious. Note that examples are sprinkled over the whole manual, and this
		3519	section only contains stuff that wouldn't fit anywhere else.
		3520
		3521	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
		3522
		3523	Each watcher has, by default, a C<void *data> member that you can read
		3524	or modify at any time: libev will completely ignore it. This can be used
		3525	to associate arbitrary data with your watcher. If you need more data and
		3526	don't want to allocate memory separately and store a pointer to it in that
		3527	data member, you can also "subclass" the watcher type and provide your own
		3528	data:
		3529
		3530	struct my_io
		3531	{
		3532	ev_io io;
		3533	int otherfd;
		3534	void *somedata;
		3535	struct whatever *mostinteresting;
		3536	};
		3537
		3538	...
		3539	struct my_io w;
		3540	ev_io_init (&w.io, my_cb, fd, EV_READ);
		3541
		3542	And since your callback will be called with a pointer to the watcher, you
		3543	can cast it back to your own type:
		3544
		3545	static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)
		3546	{
		3547	struct my_io *w = (struct my_io *)w_;
		3548	...
		3549	}
		3550
		3551	More interesting and less C-conformant ways of casting your callback
		3552	function type instead have been omitted.
		3553
		3554	=head2 BUILDING YOUR OWN COMPOSITE WATCHERS
		3555
		3556	Another common scenario is to use some data structure with multiple
		3557	embedded watchers, in effect creating your own watcher that combines
		3558	multiple libev event sources into one "super-watcher":
		3559
		3560	struct my_biggy
		3561	{
		3562	int some_data;
		3563	ev_timer t1;
		3564	ev_timer t2;
		3565	}
		3566
		3567	In this case getting the pointer to C<my_biggy> is a bit more
		3568	complicated: Either you store the address of your C<my_biggy> struct in
		3569	the C<data> member of the watcher (for woozies or C++ coders), or you need
		3570	to use some pointer arithmetic using C<offsetof> inside your watchers (for
		3571	real programmers):
		3572
		3573	#include <stddef.h>
		3574
		3575	static void
		3576	t1_cb (EV_P_ ev_timer *w, int revents)
		3577	{
		3578	struct my_biggy big = (struct my_biggy *)
		3579	(((char *)w) - offsetof (struct my_biggy, t1));
		3580	}
		3581
		3582	static void
		3583	t2_cb (EV_P_ ev_timer *w, int revents)
		3584	{
		3585	struct my_biggy big = (struct my_biggy *)
		3586	(((char *)w) - offsetof (struct my_biggy, t2));
		3587	}
		3588
		3589	=head2 AVOIDING FINISHING BEFORE RETURNING
		3590
		3591	Often you have structures like this in event-based programs:
		3592
		3593	callback ()
		3594	{
		3595	free (request);
		3596	}
		3597
		3598	request = start_new_request (..., callback);
		3599
		3600	The intent is to start some "lengthy" operation. The C<request> could be
		3601	used to cancel the operation, or do other things with it.
		3602
		3603	It's not uncommon to have code paths in C<start_new_request> that
		3604	immediately invoke the callback, for example, to report errors. Or you add
		3605	some caching layer that finds that it can skip the lengthy aspects of the
		3606	operation and simply invoke the callback with the result.
		3607
		3608	The problem here is that this will happen I<before> C<start_new_request>
		3609	has returned, so C<request> is not set.
		3610
		3611	Even if you pass the request by some safer means to the callback, you
		3612	might want to do something to the request after starting it, such as
		3613	canceling it, which probably isn't working so well when the callback has
		3614	already been invoked.
		3615
		3616	A common way around all these issues is to make sure that
		3617	C<start_new_request> I<always> returns before the callback is invoked. If
		3618	C<start_new_request> immediately knows the result, it can artificially
		3619	delay invoking the callback by e.g. using a C<prepare> or C<idle> watcher
		3620	for example, or more sneakily, by reusing an existing (stopped) watcher
		3621	and pushing it into the pending queue:
		3622
		3623	ev_set_cb (watcher, callback);
		3624	ev_feed_event (EV_A_ watcher, 0);
		3625
		3626	This way, C<start_new_request> can safely return before the callback is
		3627	invoked, while not delaying callback invocation too much.
		3628
		3629	=head2 MODEL/NESTED EVENT LOOP INVOCATIONS AND EXIT CONDITIONS
		3630
		3631	Often (especially in GUI toolkits) there are places where you have
		3632	I<modal> interaction, which is most easily implemented by recursively
		3633	invoking C<ev_run>.
		3634
		3635	This brings the problem of exiting - a callback might want to finish the
		3636	main C<ev_run> call, but not the nested one (e.g. user clicked "Quit", but
		3637	a modal "Are you sure?" dialog is still waiting), or just the nested one
		3638	and not the main one (e.g. user clocked "Ok" in a modal dialog), or some
		3639	other combination: In these cases, C<ev_break> will not work alone.
		3640
		3641	The solution is to maintain "break this loop" variable for each C<ev_run>
		3642	invocation, and use a loop around C<ev_run> until the condition is
		3643	triggered, using C<EVRUN_ONCE>:
		3644
		3645	// main loop
		3646	int exit_main_loop = 0;
		3647
		3648	while (!exit_main_loop)
		3649	ev_run (EV_DEFAULT_ EVRUN_ONCE);
		3650
		3651	// in a modal watcher
		3652	int exit_nested_loop = 0;
		3653
		3654	while (!exit_nested_loop)
		3655	ev_run (EV_A_ EVRUN_ONCE);
		3656
		3657	To exit from any of these loops, just set the corresponding exit variable:
		3658
		3659	// exit modal loop
		3660	exit_nested_loop = 1;
		3661
		3662	// exit main program, after modal loop is finished
		3663	exit_main_loop = 1;
		3664
		3665	// exit both
		3666	exit_main_loop = exit_nested_loop = 1;
		3667
		3668	=head2 THREAD LOCKING EXAMPLE
		3669
		3670	Here is a fictitious example of how to run an event loop in a different
		3671	thread from where callbacks are being invoked and watchers are
		3672	created/added/removed.
		3673
		3674	For a real-world example, see the C<EV::Loop::Async> perl module,
		3675	which uses exactly this technique (which is suited for many high-level
		3676	languages).
		3677
		3678	The example uses a pthread mutex to protect the loop data, a condition
		3679	variable to wait for callback invocations, an async watcher to notify the
		3680	event loop thread and an unspecified mechanism to wake up the main thread.
		3681
		3682	First, you need to associate some data with the event loop:
		3683
		3684	typedef struct {
		3685	mutex_t lock; /* global loop lock */
		3686	ev_async async_w;
		3687	thread_t tid;
		3688	cond_t invoke_cv;
		3689	} userdata;
		3690
		3691	void prepare_loop (EV_P)
		3692	{
		3693	// for simplicity, we use a static userdata struct.
		3694	static userdata u;
		3695
		3696	ev_async_init (&u->async_w, async_cb);
		3697	ev_async_start (EV_A_ &u->async_w);
		3698
		3699	pthread_mutex_init (&u->lock, 0);
		3700	pthread_cond_init (&u->invoke_cv, 0);
		3701
		3702	// now associate this with the loop
		3703	ev_set_userdata (EV_A_ u);
		3704	ev_set_invoke_pending_cb (EV_A_ l_invoke);
		3705	ev_set_loop_release_cb (EV_A_ l_release, l_acquire);
		3706
		3707	// then create the thread running ev_run
		3708	pthread_create (&u->tid, 0, l_run, EV_A);
		3709	}
		3710
		3711	The callback for the C<ev_async> watcher does nothing: the watcher is used
		3712	solely to wake up the event loop so it takes notice of any new watchers
		3713	that might have been added:
		3714
		3715	static void
		3716	async_cb (EV_P_ ev_async *w, int revents)
		3717	{
		3718	// just used for the side effects
		3719	}
		3720
		3721	The C<l_release> and C<l_acquire> callbacks simply unlock/lock the mutex
		3722	protecting the loop data, respectively.
		3723
		3724	static void
		3725	l_release (EV_P)
		3726	{
		3727	userdata *u = ev_userdata (EV_A);
		3728	pthread_mutex_unlock (&u->lock);
		3729	}
		3730
		3731	static void
		3732	l_acquire (EV_P)
		3733	{
		3734	userdata *u = ev_userdata (EV_A);
		3735	pthread_mutex_lock (&u->lock);
		3736	}
		3737
		3738	The event loop thread first acquires the mutex, and then jumps straight
		3739	into C<ev_run>:
		3740
		3741	void *
		3742	l_run (void *thr_arg)
		3743	{
		3744	struct ev_loop *loop = (struct ev_loop *)thr_arg;
		3745
		3746	l_acquire (EV_A);
		3747	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
		3748	ev_run (EV_A_ 0);
		3749	l_release (EV_A);
		3750
		3751	return 0;
		3752	}
		3753
		3754	Instead of invoking all pending watchers, the C<l_invoke> callback will
		3755	signal the main thread via some unspecified mechanism (signals? pipe
		3756	writes? C<Async::Interrupt>?) and then waits until all pending watchers
		3757	have been called (in a while loop because a) spurious wakeups are possible
		3758	and b) skipping inter-thread-communication when there are no pending
		3759	watchers is very beneficial):
		3760
		3761	static void
		3762	l_invoke (EV_P)
		3763	{
		3764	userdata *u = ev_userdata (EV_A);
		3765
		3766	while (ev_pending_count (EV_A))
		3767	{
		3768	wake_up_other_thread_in_some_magic_or_not_so_magic_way ();
		3769	pthread_cond_wait (&u->invoke_cv, &u->lock);
		3770	}
		3771	}
		3772
		3773	Now, whenever the main thread gets told to invoke pending watchers, it
		3774	will grab the lock, call C<ev_invoke_pending> and then signal the loop
		3775	thread to continue:
		3776
		3777	static void
		3778	real_invoke_pending (EV_P)
		3779	{
		3780	userdata *u = ev_userdata (EV_A);
		3781
		3782	pthread_mutex_lock (&u->lock);
		3783	ev_invoke_pending (EV_A);
		3784	pthread_cond_signal (&u->invoke_cv);
		3785	pthread_mutex_unlock (&u->lock);
		3786	}
		3787
		3788	Whenever you want to start/stop a watcher or do other modifications to an
		3789	event loop, you will now have to lock:
		3790
		3791	ev_timer timeout_watcher;
		3792	userdata *u = ev_userdata (EV_A);
		3793
		3794	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
		3795
		3796	pthread_mutex_lock (&u->lock);
		3797	ev_timer_start (EV_A_ &timeout_watcher);
		3798	ev_async_send (EV_A_ &u->async_w);
		3799	pthread_mutex_unlock (&u->lock);
		3800
		3801	Note that sending the C<ev_async> watcher is required because otherwise
		3802	an event loop currently blocking in the kernel will have no knowledge
		3803	about the newly added timer. By waking up the loop it will pick up any new
		3804	watchers in the next event loop iteration.
		3805
		3806	=head2 THREADS, COROUTINES, CONTINUATIONS, QUEUES... INSTEAD OF CALLBACKS
		3807
		3808	While the overhead of a callback that e.g. schedules a thread is small, it
		3809	is still an overhead. If you embed libev, and your main usage is with some
		3810	kind of threads or coroutines, you might want to customise libev so that
		3811	doesn't need callbacks anymore.
		3812
		3813	Imagine you have coroutines that you can switch to using a function
		3814	C<switch_to (coro)>, that libev runs in a coroutine called C<libev_coro>
		3815	and that due to some magic, the currently active coroutine is stored in a
		3816	global called C<current_coro>. Then you can build your own "wait for libev
		3817	event" primitive by changing C<EV_CB_DECLARE> and C<EV_CB_INVOKE> (note
		3818	the differing C<;> conventions):
		3819
		3820	#define EV_CB_DECLARE(type) struct my_coro *cb;
		3821	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)
		3822
		3823	That means instead of having a C callback function, you store the
		3824	coroutine to switch to in each watcher, and instead of having libev call
		3825	your callback, you instead have it switch to that coroutine.
		3826
		3827	A coroutine might now wait for an event with a function called
		3828	C<wait_for_event>. (the watcher needs to be started, as always, but it doesn't
		3829	matter when, or whether the watcher is active or not when this function is
		3830	called):
		3831
		3832	void
		3833	wait_for_event (ev_watcher *w)
		3834	{
		3835	ev_cb_set (w) = current_coro;
		3836	switch_to (libev_coro);
		3837	}
		3838
		3839	That basically suspends the coroutine inside C<wait_for_event> and
		3840	continues the libev coroutine, which, when appropriate, switches back to
		3841	this or any other coroutine.
		3842
		3843	You can do similar tricks if you have, say, threads with an event queue -
		3844	instead of storing a coroutine, you store the queue object and instead of
		3845	switching to a coroutine, you push the watcher onto the queue and notify
		3846	any waiters.
		3847
		3848	To embed libev, see L<EMBEDDING>, but in short, it's easiest to create two
		3849	files, F<my_ev.h> and F<my_ev.c> that include the respective libev files:
		3850
		3851	// my_ev.h
		3852	#define EV_CB_DECLARE(type) struct my_coro *cb;
		3853	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb);
		3854	#include "../libev/ev.h"
		3855
		3856	// my_ev.c
		3857	#define EV_H "my_ev.h"
		3858	#include "../libev/ev.c"
		3859
		3860	And then use F<my_ev.h> when you would normally use F<ev.h>, and compile
		3861	F<my_ev.c> into your project. When properly specifying include paths, you
		3862	can even use F<ev.h> as header file name directly.
2766		3863
2767		3864
2768	=head1 LIBEVENT EMULATION	3865	=head1 LIBEVENT EMULATION
2769		3866
2770	Libev offers a compatibility emulation layer for libevent. It cannot	3867	Libev offers a compatibility emulation layer for libevent. It cannot
2771	emulate the internals of libevent, so here are some usage hints:	3868	emulate the internals of libevent, so here are some usage hints:
2772		3869
2773	=over 4	3870	=over 4
		3871
		3872	=item * Only the libevent-1.4.1-beta API is being emulated.
		3873
		3874	This was the newest libevent version available when libev was implemented,
		3875	and is still mostly unchanged in 2010.
2774		3876
2775	=item * Use it by including <event.h>, as usual.	3877	=item * Use it by including <event.h>, as usual.
2776		3878
2777	=item * The following members are fully supported: ev_base, ev_callback,	3879	=item * The following members are fully supported: ev_base, ev_callback,
2778	ev_arg, ev_fd, ev_res, ev_events.	3880	ev_arg, ev_fd, ev_res, ev_events.
…		…
2784	=item * Priorities are not currently supported. Initialising priorities	3886	=item * Priorities are not currently supported. Initialising priorities
2785	will fail and all watchers will have the same priority, even though there	3887	will fail and all watchers will have the same priority, even though there
2786	is an ev_pri field.	3888	is an ev_pri field.
2787		3889
2788	=item * In libevent, the last base created gets the signals, in libev, the	3890	=item * In libevent, the last base created gets the signals, in libev, the
2789	first base created (== the default loop) gets the signals.	3891	base that registered the signal gets the signals.
2790		3892
2791	=item * Other members are not supported.	3893	=item * Other members are not supported.
2792		3894
2793	=item * The libev emulation is I<not> ABI compatible to libevent, you need	3895	=item * The libev emulation is I<not> ABI compatible to libevent, you need
2794	to use the libev header file and library.	3896	to use the libev header file and library.
…		…
2813	Care has been taken to keep the overhead low. The only data member the C++	3915	Care has been taken to keep the overhead low. The only data member the C++
2814	classes add (compared to plain C-style watchers) is the event loop pointer	3916	classes add (compared to plain C-style watchers) is the event loop pointer
2815	that the watcher is associated with (or no additional members at all if	3917	that the watcher is associated with (or no additional members at all if
2816	you disable C<EV_MULTIPLICITY> when embedding libev).	3918	you disable C<EV_MULTIPLICITY> when embedding libev).
2817		3919
2818	Currently, functions, and static and non-static member functions can be	3920	Currently, functions, static and non-static member functions and classes
2819	used as callbacks. Other types should be easy to add as long as they only	3921	with C<operator ()> can be used as callbacks. Other types should be easy
2820	need one additional pointer for context. If you need support for other	3922	to add as long as they only need one additional pointer for context. If
2821	types of functors please contact the author (preferably after implementing	3923	you need support for other types of functors please contact the author
2822	it).	3924	(preferably after implementing it).
		3925
		3926	For all this to work, your C++ compiler either has to use the same calling
		3927	conventions as your C compiler (for static member functions), or you have
		3928	to embed libev and compile libev itself as C++.
2823		3929
2824	Here is a list of things available in the C<ev> namespace:	3930	Here is a list of things available in the C<ev> namespace:
2825		3931
2826	=over 4	3932	=over 4
2827		3933
…		…
2837	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.	3943	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.
2838		3944
2839	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of	3945	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of
2840	the same name in the C<ev> namespace, with the exception of C<ev_signal>	3946	the same name in the C<ev> namespace, with the exception of C<ev_signal>
2841	which is called C<ev::sig> to avoid clashes with the C<signal> macro	3947	which is called C<ev::sig> to avoid clashes with the C<signal> macro
2842	defines by many implementations.	3948	defined by many implementations.
2843		3949
2844	All of those classes have these methods:	3950	All of those classes have these methods:
2845		3951
2846	=over 4	3952	=over 4
2847		3953
2848	=item ev::TYPE::TYPE ()	3954	=item ev::TYPE::TYPE ()
2849		3955
2850	=item ev::TYPE::TYPE (struct ev_loop *)	3956	=item ev::TYPE::TYPE (loop)
2851		3957
2852	=item ev::TYPE::~TYPE	3958	=item ev::TYPE::~TYPE
2853		3959
2854	The constructor (optionally) takes an event loop to associate the watcher	3960	The constructor (optionally) takes an event loop to associate the watcher
2855	with. If it is omitted, it will use C<EV_DEFAULT>.	3961	with. If it is omitted, it will use C<EV_DEFAULT>.
…		…
2888	myclass obj;	3994	myclass obj;
2889	ev::io iow;	3995	ev::io iow;
2890	iow.set <myclass, &myclass::io_cb> (&obj);	3996	iow.set <myclass, &myclass::io_cb> (&obj);
2891		3997
2892	=item w->set (object *)	3998	=item w->set (object *)
2893
2894	This is an B<experimental> feature that might go away in a future version.
2895		3999
2896	This is a variation of a method callback - leaving out the method to call	4000	This is a variation of a method callback - leaving out the method to call
2897	will default the method to C<operator ()>, which makes it possible to use	4001	will default the method to C<operator ()>, which makes it possible to use
2898	functor objects without having to manually specify the C<operator ()> all	4002	functor objects without having to manually specify the C<operator ()> all
2899	the time. Incidentally, you can then also leave out the template argument	4003	the time. Incidentally, you can then also leave out the template argument
…		…
2932	Example: Use a plain function as callback.	4036	Example: Use a plain function as callback.
2933		4037
2934	static void io_cb (ev::io &w, int revents) { }	4038	static void io_cb (ev::io &w, int revents) { }
2935	iow.set <io_cb> ();	4039	iow.set <io_cb> ();
2936		4040
2937	=item w->set (struct ev_loop *)	4041	=item w->set (loop)
2938		4042
2939	Associates a different C<struct ev_loop> with this watcher. You can only	4043	Associates a different C<struct ev_loop> with this watcher. You can only
2940	do this when the watcher is inactive (and not pending either).	4044	do this when the watcher is inactive (and not pending either).
2941		4045
2942	=item w->set ([arguments])	4046	=item w->set ([arguments])
2943		4047
2944	Basically the same as C<ev_TYPE_set>, with the same arguments. Must be	4048	Basically the same as C<ev_TYPE_set>, with the same arguments. Either this
2945	called at least once. Unlike the C counterpart, an active watcher gets	4049	method or a suitable start method must be called at least once. Unlike the
2946	automatically stopped and restarted when reconfiguring it with this	4050	C counterpart, an active watcher gets automatically stopped and restarted
2947	method.	4051	when reconfiguring it with this method.
2948		4052
2949	=item w->start ()	4053	=item w->start ()
2950		4054
2951	Starts the watcher. Note that there is no C<loop> argument, as the	4055	Starts the watcher. Note that there is no C<loop> argument, as the
2952	constructor already stores the event loop.	4056	constructor already stores the event loop.
2953		4057
		4058	=item w->start ([arguments])
		4059
		4060	Instead of calling C<set> and C<start> methods separately, it is often
		4061	convenient to wrap them in one call. Uses the same type of arguments as
		4062	the configure C<set> method of the watcher.
		4063
2954	=item w->stop ()	4064	=item w->stop ()
2955		4065
2956	Stops the watcher if it is active. Again, no C<loop> argument.	4066	Stops the watcher if it is active. Again, no C<loop> argument.
2957		4067
2958	=item w->again () (C<ev::timer>, C<ev::periodic> only)	4068	=item w->again () (C<ev::timer>, C<ev::periodic> only)
…		…
2970		4080
2971	=back	4081	=back
2972		4082
2973	=back	4083	=back
2974		4084
2975	Example: Define a class with an IO and idle watcher, start one of them in	4085	Example: Define a class with two I/O and idle watchers, start the I/O
2976	the constructor.	4086	watchers in the constructor.
2977		4087
2978	class myclass	4088	class myclass
2979	{	4089	{
2980	ev::io io ; void io_cb (ev::io &w, int revents);	4090	ev::io io ; void io_cb (ev::io &w, int revents);
		4091	ev::io io2 ; void io2_cb (ev::io &w, int revents);
2981	ev::idle idle; void idle_cb (ev::idle &w, int revents);	4092	ev::idle idle; void idle_cb (ev::idle &w, int revents);
2982		4093
2983	myclass (int fd)	4094	myclass (int fd)
2984	{	4095	{
2985	io .set <myclass, &myclass::io_cb > (this);	4096	io .set <myclass, &myclass::io_cb > (this);
		4097	io2 .set <myclass, &myclass::io2_cb > (this);
2986	idle.set <myclass, &myclass::idle_cb> (this);	4098	idle.set <myclass, &myclass::idle_cb> (this);
2987		4099
2988	io.start (fd, ev::READ);	4100	io.set (fd, ev::WRITE); // configure the watcher
		4101	io.start (); // start it whenever convenient
		4102
		4103	io2.start (fd, ev::READ); // set + start in one call
2989	}	4104	}
2990	};	4105	};
2991		4106
2992		4107
2993	=head1 OTHER LANGUAGE BINDINGS	4108	=head1 OTHER LANGUAGE BINDINGS
…		…
3012	L<http://software.schmorp.de/pkg/EV>.	4127	L<http://software.schmorp.de/pkg/EV>.
3013		4128
3014	=item Python	4129	=item Python
3015		4130
3016	Python bindings can be found at L<http://code.google.com/p/pyev/>. It	4131	Python bindings can be found at L<http://code.google.com/p/pyev/>. It
3017	seems to be quite complete and well-documented. Note, however, that the	4132	seems to be quite complete and well-documented.
3018	patch they require for libev is outright dangerous as it breaks the ABI
3019	for everybody else, and therefore, should never be applied in an installed
3020	libev (if python requires an incompatible ABI then it needs to embed
3021	libev).
3022		4133
3023	=item Ruby	4134	=item Ruby
3024		4135
3025	Tony Arcieri has written a ruby extension that offers access to a subset	4136	Tony Arcieri has written a ruby extension that offers access to a subset
3026	of the libev API and adds file handle abstractions, asynchronous DNS and	4137	of the libev API and adds file handle abstractions, asynchronous DNS and
…		…
3028	L<http://rev.rubyforge.org/>.	4139	L<http://rev.rubyforge.org/>.
3029		4140
3030	Roger Pack reports that using the link order C<-lws2_32 -lmsvcrt-ruby-190>	4141	Roger Pack reports that using the link order C<-lws2_32 -lmsvcrt-ruby-190>
3031	makes rev work even on mingw.	4142	makes rev work even on mingw.
3032		4143
		4144	=item Haskell
		4145
		4146	A haskell binding to libev is available at
		4147	L<http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hlibev>.
		4148
3033	=item D	4149	=item D
3034		4150
3035	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to	4151	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
3036	be found at L<http://proj.llucax.com.ar/wiki/evd>.	4152	be found at L<http://www.llucax.com.ar/proj/ev.d/index.html>.
3037		4153
3038	=item Ocaml	4154	=item Ocaml
3039		4155
3040	Erkki Seppala has written Ocaml bindings for libev, to be found at	4156	Erkki Seppala has written Ocaml bindings for libev, to be found at
3041	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.	4157	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.
		4158
		4159	=item Lua
		4160
		4161	Brian Maher has written a partial interface to libev for lua (at the
		4162	time of this writing, only C<ev_io> and C<ev_timer>), to be found at
		4163	L<http://github.com/brimworks/lua-ev>.
3042		4164
3043	=back	4165	=back
3044		4166
3045		4167
3046	=head1 MACRO MAGIC	4168	=head1 MACRO MAGIC
…		…
3060	loop argument"). The C<EV_A> form is used when this is the sole argument,	4182	loop argument"). The C<EV_A> form is used when this is the sole argument,
3061	C<EV_A_> is used when other arguments are following. Example:	4183	C<EV_A_> is used when other arguments are following. Example:
3062		4184
3063	ev_unref (EV_A);	4185	ev_unref (EV_A);
3064	ev_timer_add (EV_A_ watcher);	4186	ev_timer_add (EV_A_ watcher);
3065	ev_loop (EV_A_ 0);	4187	ev_run (EV_A_ 0);
3066		4188
3067	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,	4189	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
3068	which is often provided by the following macro.	4190	which is often provided by the following macro.
3069		4191
3070	=item C<EV_P>, C<EV_P_>	4192	=item C<EV_P>, C<EV_P_>
…		…
3083	suitable for use with C<EV_A>.	4205	suitable for use with C<EV_A>.
3084		4206
3085	=item C<EV_DEFAULT>, C<EV_DEFAULT_>	4207	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
3086		4208
3087	Similar to the other two macros, this gives you the value of the default	4209	Similar to the other two macros, this gives you the value of the default
3088	loop, if multiple loops are supported ("ev loop default").	4210	loop, if multiple loops are supported ("ev loop default"). The default loop
		4211	will be initialised if it isn't already initialised.
		4212
		4213	For non-multiplicity builds, these macros do nothing, so you always have
		4214	to initialise the loop somewhere.
3089		4215
3090	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>	4216	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
3091		4217
3092	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the	4218	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
3093	default loop has been initialised (C<UC> == unchecked). Their behaviour	4219	default loop has been initialised (C<UC> == unchecked). Their behaviour
…		…
3110	}	4236	}
3111		4237
3112	ev_check check;	4238	ev_check check;
3113	ev_check_init (&check, check_cb);	4239	ev_check_init (&check, check_cb);
3114	ev_check_start (EV_DEFAULT_ &check);	4240	ev_check_start (EV_DEFAULT_ &check);
3115	ev_loop (EV_DEFAULT_ 0);	4241	ev_run (EV_DEFAULT_ 0);
3116		4242
3117	=head1 EMBEDDING	4243	=head1 EMBEDDING
3118		4244
3119	Libev can (and often is) directly embedded into host	4245	Libev can (and often is) directly embedded into host
3120	applications. Examples of applications that embed it include the Deliantra	4246	applications. Examples of applications that embed it include the Deliantra
…		…
3200	libev.m4	4326	libev.m4
3201		4327
3202	=head2 PREPROCESSOR SYMBOLS/MACROS	4328	=head2 PREPROCESSOR SYMBOLS/MACROS
3203		4329
3204	Libev can be configured via a variety of preprocessor symbols you have to	4330	Libev can be configured via a variety of preprocessor symbols you have to
3205	define before including any of its files. The default in the absence of	4331	define before including (or compiling) any of its files. The default in
3206	autoconf is documented for every option.	4332	the absence of autoconf is documented for every option.
		4333
		4334	Symbols marked with "(h)" do not change the ABI, and can have different
		4335	values when compiling libev vs. including F<ev.h>, so it is permissible
		4336	to redefine them before including F<ev.h> without breaking compatibility
		4337	to a compiled library. All other symbols change the ABI, which means all
		4338	users of libev and the libev code itself must be compiled with compatible
		4339	settings.
3207		4340
3208	=over 4	4341	=over 4
3209		4342
		4343	=item EV_COMPAT3 (h)
		4344
		4345	Backwards compatibility is a major concern for libev. This is why this
		4346	release of libev comes with wrappers for the functions and symbols that
		4347	have been renamed between libev version 3 and 4.
		4348
		4349	You can disable these wrappers (to test compatibility with future
		4350	versions) by defining C<EV_COMPAT3> to C<0> when compiling your
		4351	sources. This has the additional advantage that you can drop the C<struct>
		4352	from C<struct ev_loop> declarations, as libev will provide an C<ev_loop>
		4353	typedef in that case.
		4354
		4355	In some future version, the default for C<EV_COMPAT3> will become C<0>,
		4356	and in some even more future version the compatibility code will be
		4357	removed completely.
		4358
3210	=item EV_STANDALONE	4359	=item EV_STANDALONE (h)
3211		4360
3212	Must always be C<1> if you do not use autoconf configuration, which	4361	Must always be C<1> if you do not use autoconf configuration, which
3213	keeps libev from including F<config.h>, and it also defines dummy	4362	keeps libev from including F<config.h>, and it also defines dummy
3214	implementations for some libevent functions (such as logging, which is not	4363	implementations for some libevent functions (such as logging, which is not
3215	supported). It will also not define any of the structs usually found in	4364	supported). It will also not define any of the structs usually found in
3216	F<event.h> that are not directly supported by the libev core alone.	4365	F<event.h> that are not directly supported by the libev core alone.
3217		4366
3218	In stanbdalone mode, libev will still try to automatically deduce the	4367	In standalone mode, libev will still try to automatically deduce the
3219	configuration, but has to be more conservative.	4368	configuration, but has to be more conservative.
		4369
		4370	=item EV_USE_FLOOR
		4371
		4372	If defined to be C<1>, libev will use the C<floor ()> function for its
		4373	periodic reschedule calculations, otherwise libev will fall back on a
		4374	portable (slower) implementation. If you enable this, you usually have to
		4375	link against libm or something equivalent. Enabling this when the C<floor>
		4376	function is not available will fail, so the safe default is to not enable
		4377	this.
3220		4378
3221	=item EV_USE_MONOTONIC	4379	=item EV_USE_MONOTONIC
3222		4380
3223	If defined to be C<1>, libev will try to detect the availability of the	4381	If defined to be C<1>, libev will try to detect the availability of the
3224	monotonic clock option at both compile time and runtime. Otherwise no	4382	monotonic clock option at both compile time and runtime. Otherwise no
…		…
3229	function is hiding in (often F<-lrt>). See also C<EV_USE_CLOCK_SYSCALL>.	4387	function is hiding in (often F<-lrt>). See also C<EV_USE_CLOCK_SYSCALL>.
3230		4388
3231	=item EV_USE_REALTIME	4389	=item EV_USE_REALTIME
3232		4390
3233	If defined to be C<1>, libev will try to detect the availability of the	4391	If defined to be C<1>, libev will try to detect the availability of the
3234	real-time clock option at compile time (and assume its availability at	4392	real-time clock option at compile time (and assume its availability
3235	runtime if successful). Otherwise no use of the real-time clock option will	4393	at runtime if successful). Otherwise no use of the real-time clock
3236	be attempted. This effectively replaces C<gettimeofday> by C<clock_get	4394	option will be attempted. This effectively replaces C<gettimeofday>
3237	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See the	4395	by C<clock_get (CLOCK_REALTIME, ...)> and will not normally affect
3238	note about libraries in the description of C<EV_USE_MONOTONIC>, though.	4396	correctness. See the note about libraries in the description of
		4397	C<EV_USE_MONOTONIC>, though. Defaults to the opposite value of
		4398	C<EV_USE_CLOCK_SYSCALL>.
3239		4399
3240	=item EV_USE_CLOCK_SYSCALL	4400	=item EV_USE_CLOCK_SYSCALL
3241		4401
3242	If defined to be C<1>, libev will try to use a direct syscall instead	4402	If defined to be C<1>, libev will try to use a direct syscall instead
3243	of calling the system-provided C<clock_gettime> function. This option	4403	of calling the system-provided C<clock_gettime> function. This option
…		…
3286	be used is the winsock select). This means that it will call	4446	be used is the winsock select). This means that it will call
3287	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	4447	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
3288	it is assumed that all these functions actually work on fds, even	4448	it is assumed that all these functions actually work on fds, even
3289	on win32. Should not be defined on non-win32 platforms.	4449	on win32. Should not be defined on non-win32 platforms.
3290		4450
3291	=item EV_FD_TO_WIN32_HANDLE	4451	=item EV_FD_TO_WIN32_HANDLE(fd)
3292		4452
3293	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map	4453	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
3294	file descriptors to socket handles. When not defining this symbol (the	4454	file descriptors to socket handles. When not defining this symbol (the
3295	default), then libev will call C<_get_osfhandle>, which is usually	4455	default), then libev will call C<_get_osfhandle>, which is usually
3296	correct. In some cases, programs use their own file descriptor management,	4456	correct. In some cases, programs use their own file descriptor management,
3297	in which case they can provide this function to map fds to socket handles.	4457	in which case they can provide this function to map fds to socket handles.
		4458
		4459	=item EV_WIN32_HANDLE_TO_FD(handle)
		4460
		4461	If C<EV_SELECT_IS_WINSOCKET> then libev maps handles to file descriptors
		4462	using the standard C<_open_osfhandle> function. For programs implementing
		4463	their own fd to handle mapping, overwriting this function makes it easier
		4464	to do so. This can be done by defining this macro to an appropriate value.
		4465
		4466	=item EV_WIN32_CLOSE_FD(fd)
		4467
		4468	If programs implement their own fd to handle mapping on win32, then this
		4469	macro can be used to override the C<close> function, useful to unregister
		4470	file descriptors again. Note that the replacement function has to close
		4471	the underlying OS handle.
3298		4472
3299	=item EV_USE_POLL	4473	=item EV_USE_POLL
3300		4474
3301	If defined to be C<1>, libev will compile in support for the C<poll>(2)	4475	If defined to be C<1>, libev will compile in support for the C<poll>(2)
3302	backend. Otherwise it will be enabled on non-win32 platforms. It	4476	backend. Otherwise it will be enabled on non-win32 platforms. It
…		…
3338	If defined to be C<1>, libev will compile in support for the Linux inotify	4512	If defined to be C<1>, libev will compile in support for the Linux inotify
3339	interface to speed up C<ev_stat> watchers. Its actual availability will	4513	interface to speed up C<ev_stat> watchers. Its actual availability will
3340	be detected at runtime. If undefined, it will be enabled if the headers	4514	be detected at runtime. If undefined, it will be enabled if the headers
3341	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.	4515	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
3342		4516
		4517	=item EV_NO_SMP
		4518
		4519	If defined to be C<1>, libev will assume that memory is always coherent
		4520	between threads, that is, threads can be used, but threads never run on
		4521	different cpus (or different cpu cores). This reduces dependencies
		4522	and makes libev faster.
		4523
		4524	=item EV_NO_THREADS
		4525
		4526	If defined to be C<1>, libev will assume that it will never be called
		4527	from different threads, which is a stronger assumption than C<EV_NO_SMP>,
		4528	above. This reduces dependencies and makes libev faster.
		4529
3343	=item EV_ATOMIC_T	4530	=item EV_ATOMIC_T
3344		4531
3345	Libev requires an integer type (suitable for storing C<0> or C<1>) whose	4532	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
3346	access is atomic with respect to other threads or signal contexts. No such	4533	access is atomic and serialised with respect to other threads or signal
3347	type is easily found in the C language, so you can provide your own type	4534	contexts. No such type is easily found in the C language, so you can
3348	that you know is safe for your purposes. It is used both for signal handler "locking"	4535	provide your own type that you know is safe for your purposes. It is used
3349	as well as for signal and thread safety in C<ev_async> watchers.	4536	both for signal handler "locking" as well as for signal and thread safety
		4537	in C<ev_async> watchers.
3350		4538
3351	In the absence of this define, libev will use C<sig_atomic_t volatile>	4539	In the absence of this define, libev will use C<sig_atomic_t volatile>
3352	(from F<signal.h>), which is usually good enough on most platforms.	4540	(from F<signal.h>), which is usually good enough on most platforms,
		4541	although strictly speaking using a type that also implies a memory fence
		4542	is required.
3353		4543
3354	=item EV_H	4544	=item EV_H (h)
3355		4545
3356	The name of the F<ev.h> header file used to include it. The default if	4546	The name of the F<ev.h> header file used to include it. The default if
3357	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be	4547	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
3358	used to virtually rename the F<ev.h> header file in case of conflicts.	4548	used to virtually rename the F<ev.h> header file in case of conflicts.
3359		4549
3360	=item EV_CONFIG_H	4550	=item EV_CONFIG_H (h)
3361		4551
3362	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	4552	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
3363	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	4553	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
3364	C<EV_H>, above.	4554	C<EV_H>, above.
3365		4555
3366	=item EV_EVENT_H	4556	=item EV_EVENT_H (h)
3367		4557
3368	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	4558	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
3369	of how the F<event.h> header can be found, the default is C<"event.h">.	4559	of how the F<event.h> header can be found, the default is C<"event.h">.
3370		4560
3371	=item EV_PROTOTYPES	4561	=item EV_PROTOTYPES (h)
3372		4562
3373	If defined to be C<0>, then F<ev.h> will not define any function	4563	If defined to be C<0>, then F<ev.h> will not define any function
3374	prototypes, but still define all the structs and other symbols. This is	4564	prototypes, but still define all the structs and other symbols. This is
3375	occasionally useful if you want to provide your own wrapper functions	4565	occasionally useful if you want to provide your own wrapper functions
3376	around libev functions.	4566	around libev functions.
…		…
3381	will have the C<struct ev_loop *> as first argument, and you can create	4571	will have the C<struct ev_loop *> as first argument, and you can create
3382	additional independent event loops. Otherwise there will be no support	4572	additional independent event loops. Otherwise there will be no support
3383	for multiple event loops and there is no first event loop pointer	4573	for multiple event loops and there is no first event loop pointer
3384	argument. Instead, all functions act on the single default loop.	4574	argument. Instead, all functions act on the single default loop.
3385		4575
		4576	Note that C<EV_DEFAULT> and C<EV_DEFAULT_> will no longer provide a
		4577	default loop when multiplicity is switched off - you always have to
		4578	initialise the loop manually in this case.
		4579
3386	=item EV_MINPRI	4580	=item EV_MINPRI
3387		4581
3388	=item EV_MAXPRI	4582	=item EV_MAXPRI
3389		4583
3390	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to	4584	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to
…		…
3398	fine.	4592	fine.
3399		4593
3400	If your embedding application does not need any priorities, defining these	4594	If your embedding application does not need any priorities, defining these
3401	both to C<0> will save some memory and CPU.	4595	both to C<0> will save some memory and CPU.
3402		4596
3403	=item EV_PERIODIC_ENABLE	4597	=item EV_PERIODIC_ENABLE, EV_IDLE_ENABLE, EV_EMBED_ENABLE, EV_STAT_ENABLE,
		4598	EV_PREPARE_ENABLE, EV_CHECK_ENABLE, EV_FORK_ENABLE, EV_SIGNAL_ENABLE,
		4599	EV_ASYNC_ENABLE, EV_CHILD_ENABLE.
3404		4600
3405	If undefined or defined to be C<1>, then periodic timers are supported. If	4601	If undefined or defined to be C<1> (and the platform supports it), then
3406	defined to be C<0>, then they are not. Disabling them saves a few kB of	4602	the respective watcher type is supported. If defined to be C<0>, then it
3407	code.	4603	is not. Disabling watcher types mainly saves code size.
3408		4604
3409	=item EV_IDLE_ENABLE	4605	=item EV_FEATURES
3410
3411	If undefined or defined to be C<1>, then idle watchers are supported. If
3412	defined to be C<0>, then they are not. Disabling them saves a few kB of
3413	code.
3414
3415	=item EV_EMBED_ENABLE
3416
3417	If undefined or defined to be C<1>, then embed watchers are supported. If
3418	defined to be C<0>, then they are not. Embed watchers rely on most other
3419	watcher types, which therefore must not be disabled.
3420
3421	=item EV_STAT_ENABLE
3422
3423	If undefined or defined to be C<1>, then stat watchers are supported. If
3424	defined to be C<0>, then they are not.
3425
3426	=item EV_FORK_ENABLE
3427
3428	If undefined or defined to be C<1>, then fork watchers are supported. If
3429	defined to be C<0>, then they are not.
3430
3431	=item EV_ASYNC_ENABLE
3432
3433	If undefined or defined to be C<1>, then async watchers are supported. If
3434	defined to be C<0>, then they are not.
3435
3436	=item EV_MINIMAL
3437		4606
3438	If you need to shave off some kilobytes of code at the expense of some	4607	If you need to shave off some kilobytes of code at the expense of some
3439	speed, define this symbol to C<1>. Currently this is used to override some	4608	speed (but with the full API), you can define this symbol to request
3440	inlining decisions, saves roughly 30% code size on amd64. It also selects a	4609	certain subsets of functionality. The default is to enable all features
3441	much smaller 2-heap for timer management over the default 4-heap.	4610	that can be enabled on the platform.
		4611
		4612	A typical way to use this symbol is to define it to C<0> (or to a bitset
		4613	with some broad features you want) and then selectively re-enable
		4614	additional parts you want, for example if you want everything minimal,
		4615	but multiple event loop support, async and child watchers and the poll
		4616	backend, use this:
		4617
		4618	#define EV_FEATURES 0
		4619	#define EV_MULTIPLICITY 1
		4620	#define EV_USE_POLL 1
		4621	#define EV_CHILD_ENABLE 1
		4622	#define EV_ASYNC_ENABLE 1
		4623
		4624	The actual value is a bitset, it can be a combination of the following
		4625	values:
		4626
		4627	=over 4
		4628
		4629	=item C<1> - faster/larger code
		4630
		4631	Use larger code to speed up some operations.
		4632
		4633	Currently this is used to override some inlining decisions (enlarging the
		4634	code size by roughly 30% on amd64).
		4635
		4636	When optimising for size, use of compiler flags such as C<-Os> with
		4637	gcc is recommended, as well as C<-DNDEBUG>, as libev contains a number of
		4638	assertions.
		4639
		4640	=item C<2> - faster/larger data structures
		4641
		4642	Replaces the small 2-heap for timer management by a faster 4-heap, larger
		4643	hash table sizes and so on. This will usually further increase code size
		4644	and can additionally have an effect on the size of data structures at
		4645	runtime.
		4646
		4647	=item C<4> - full API configuration
		4648
		4649	This enables priorities (sets C<EV_MAXPRI>=2 and C<EV_MINPRI>=-2), and
		4650	enables multiplicity (C<EV_MULTIPLICITY>=1).
		4651
		4652	=item C<8> - full API
		4653
		4654	This enables a lot of the "lesser used" API functions. See C<ev.h> for
		4655	details on which parts of the API are still available without this
		4656	feature, and do not complain if this subset changes over time.
		4657
		4658	=item C<16> - enable all optional watcher types
		4659
		4660	Enables all optional watcher types. If you want to selectively enable
		4661	only some watcher types other than I/O and timers (e.g. prepare,
		4662	embed, async, child...) you can enable them manually by defining
		4663	C<EV_watchertype_ENABLE> to C<1> instead.
		4664
		4665	=item C<32> - enable all backends
		4666
		4667	This enables all backends - without this feature, you need to enable at
		4668	least one backend manually (C<EV_USE_SELECT> is a good choice).
		4669
		4670	=item C<64> - enable OS-specific "helper" APIs
		4671
		4672	Enable inotify, eventfd, signalfd and similar OS-specific helper APIs by
		4673	default.
		4674
		4675	=back
		4676
		4677	Compiling with C<gcc -Os -DEV_STANDALONE -DEV_USE_EPOLL=1 -DEV_FEATURES=0>
		4678	reduces the compiled size of libev from 24.7Kb code/2.8Kb data to 6.5Kb
		4679	code/0.3Kb data on my GNU/Linux amd64 system, while still giving you I/O
		4680	watchers, timers and monotonic clock support.
		4681
		4682	With an intelligent-enough linker (gcc+binutils are intelligent enough
		4683	when you use C<-Wl,--gc-sections -ffunction-sections>) functions unused by
		4684	your program might be left out as well - a binary starting a timer and an
		4685	I/O watcher then might come out at only 5Kb.
		4686
		4687	=item EV_API_STATIC
		4688
		4689	If this symbol is defined (by default it is not), then all identifiers
		4690	will have static linkage. This means that libev will not export any
		4691	identifiers, and you cannot link against libev anymore. This can be useful
		4692	when you embed libev, only want to use libev functions in a single file,
		4693	and do not want its identifiers to be visible.
		4694
		4695	To use this, define C<EV_API_STATIC> and include F<ev.c> in the file that
		4696	wants to use libev.
		4697
		4698	This option only works when libev is compiled with a C compiler, as C++
		4699	doesn't support the required declaration syntax.
		4700
		4701	=item EV_AVOID_STDIO
		4702
		4703	If this is set to C<1> at compiletime, then libev will avoid using stdio
		4704	functions (printf, scanf, perror etc.). This will increase the code size
		4705	somewhat, but if your program doesn't otherwise depend on stdio and your
		4706	libc allows it, this avoids linking in the stdio library which is quite
		4707	big.
		4708
		4709	Note that error messages might become less precise when this option is
		4710	enabled.
		4711
		4712	=item EV_NSIG
		4713
		4714	The highest supported signal number, +1 (or, the number of
		4715	signals): Normally, libev tries to deduce the maximum number of signals
		4716	automatically, but sometimes this fails, in which case it can be
		4717	specified. Also, using a lower number than detected (C<32> should be
		4718	good for about any system in existence) can save some memory, as libev
		4719	statically allocates some 12-24 bytes per signal number.
3442		4720
3443	=item EV_PID_HASHSIZE	4721	=item EV_PID_HASHSIZE
3444		4722
3445	C<ev_child> watchers use a small hash table to distribute workload by	4723	C<ev_child> watchers use a small hash table to distribute workload by
3446	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	4724	pid. The default size is C<16> (or C<1> with C<EV_FEATURES> disabled),
3447	than enough. If you need to manage thousands of children you might want to	4725	usually more than enough. If you need to manage thousands of children you
3448	increase this value (I<must> be a power of two).	4726	might want to increase this value (I<must> be a power of two).
3449		4727
3450	=item EV_INOTIFY_HASHSIZE	4728	=item EV_INOTIFY_HASHSIZE
3451		4729
3452	C<ev_stat> watchers use a small hash table to distribute workload by	4730	C<ev_stat> watchers use a small hash table to distribute workload by
3453	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	4731	inotify watch id. The default size is C<16> (or C<1> with C<EV_FEATURES>
3454	usually more than enough. If you need to manage thousands of C<ev_stat>	4732	disabled), usually more than enough. If you need to manage thousands of
3455	watchers you might want to increase this value (I<must> be a power of	4733	C<ev_stat> watchers you might want to increase this value (I<must> be a
3456	two).	4734	power of two).
3457		4735
3458	=item EV_USE_4HEAP	4736	=item EV_USE_4HEAP
3459		4737
3460	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4738	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3461	timer and periodics heaps, libev uses a 4-heap when this symbol is defined	4739	timer and periodics heaps, libev uses a 4-heap when this symbol is defined
3462	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably	4740	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably
3463	faster performance with many (thousands) of watchers.	4741	faster performance with many (thousands) of watchers.
3464		4742
3465	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4743	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3466	(disabled).	4744	will be C<0>.
3467		4745
3468	=item EV_HEAP_CACHE_AT	4746	=item EV_HEAP_CACHE_AT
3469		4747
3470	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4748	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3471	timer and periodics heaps, libev can cache the timestamp (I<at>) within	4749	timer and periodics heaps, libev can cache the timestamp (I<at>) within
3472	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),	4750	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
3473	which uses 8-12 bytes more per watcher and a few hundred bytes more code,	4751	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
3474	but avoids random read accesses on heap changes. This improves performance	4752	but avoids random read accesses on heap changes. This improves performance
3475	noticeably with many (hundreds) of watchers.	4753	noticeably with many (hundreds) of watchers.
3476		4754
3477	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4755	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3478	(disabled).	4756	will be C<0>.
3479		4757
3480	=item EV_VERIFY	4758	=item EV_VERIFY
3481		4759
3482	Controls how much internal verification (see C<ev_loop_verify ()>) will	4760	Controls how much internal verification (see C<ev_verify ()>) will
3483	be done: If set to C<0>, no internal verification code will be compiled	4761	be done: If set to C<0>, no internal verification code will be compiled
3484	in. If set to C<1>, then verification code will be compiled in, but not	4762	in. If set to C<1>, then verification code will be compiled in, but not
3485	called. If set to C<2>, then the internal verification code will be	4763	called. If set to C<2>, then the internal verification code will be
3486	called once per loop, which can slow down libev. If set to C<3>, then the	4764	called once per loop, which can slow down libev. If set to C<3>, then the
3487	verification code will be called very frequently, which will slow down	4765	verification code will be called very frequently, which will slow down
3488	libev considerably.	4766	libev considerably.
3489		4767
3490	The default is C<1>, unless C<EV_MINIMAL> is set, in which case it will be	4768	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3491	C<0>.	4769	will be C<0>.
3492		4770
3493	=item EV_COMMON	4771	=item EV_COMMON
3494		4772
3495	By default, all watchers have a C<void *data> member. By redefining	4773	By default, all watchers have a C<void *data> member. By redefining
3496	this macro to a something else you can include more and other types of	4774	this macro to something else you can include more and other types of
3497	members. You have to define it each time you include one of the files,	4775	members. You have to define it each time you include one of the files,
3498	though, and it must be identical each time.	4776	though, and it must be identical each time.
3499		4777
3500	For example, the perl EV module uses something like this:	4778	For example, the perl EV module uses something like this:
3501		4779
…		…
3554	file.	4832	file.
3555		4833
3556	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	4834	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
3557	that everybody includes and which overrides some configure choices:	4835	that everybody includes and which overrides some configure choices:
3558		4836
3559	#define EV_MINIMAL 1	4837	#define EV_FEATURES 8
3560	#define EV_USE_POLL 0	4838	#define EV_USE_SELECT 1
3561	#define EV_MULTIPLICITY 0
3562	#define EV_PERIODIC_ENABLE 0	4839	#define EV_PREPARE_ENABLE 1
		4840	#define EV_IDLE_ENABLE 1
3563	#define EV_STAT_ENABLE 0	4841	#define EV_SIGNAL_ENABLE 1
3564	#define EV_FORK_ENABLE 0	4842	#define EV_CHILD_ENABLE 1
		4843	#define EV_USE_STDEXCEPT 0
3565	#define EV_CONFIG_H <config.h>	4844	#define EV_CONFIG_H <config.h>
3566	#define EV_MINPRI 0
3567	#define EV_MAXPRI 0
3568		4845
3569	#include "ev++.h"	4846	#include "ev++.h"
3570		4847
3571	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	4848	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
3572		4849
3573	#include "ev_cpp.h"	4850	#include "ev_cpp.h"
3574	#include "ev.c"	4851	#include "ev.c"
3575		4852
3576	=head1 INTERACTION WITH OTHER PROGRAMS OR LIBRARIES	4853	=head1 INTERACTION WITH OTHER PROGRAMS, LIBRARIES OR THE ENVIRONMENT
3577		4854
3578	=head2 THREADS AND COROUTINES	4855	=head2 THREADS AND COROUTINES
3579		4856
3580	=head3 THREADS	4857	=head3 THREADS
3581		4858
…		…
3632	default loop and triggering an C<ev_async> watcher from the default loop	4909	default loop and triggering an C<ev_async> watcher from the default loop
3633	watcher callback into the event loop interested in the signal.	4910	watcher callback into the event loop interested in the signal.
3634		4911
3635	=back	4912	=back
3636		4913
		4914	See also L<THREAD LOCKING EXAMPLE>.
		4915
3637	=head3 COROUTINES	4916	=head3 COROUTINES
3638		4917
3639	Libev is very accommodating to coroutines ("cooperative threads"):	4918	Libev is very accommodating to coroutines ("cooperative threads"):
3640	libev fully supports nesting calls to its functions from different	4919	libev fully supports nesting calls to its functions from different
3641	coroutines (e.g. you can call C<ev_loop> on the same loop from two	4920	coroutines (e.g. you can call C<ev_run> on the same loop from two
3642	different coroutines, and switch freely between both coroutines running the	4921	different coroutines, and switch freely between both coroutines running
3643	loop, as long as you don't confuse yourself). The only exception is that	4922	the loop, as long as you don't confuse yourself). The only exception is
3644	you must not do this from C<ev_periodic> reschedule callbacks.	4923	that you must not do this from C<ev_periodic> reschedule callbacks.
3645		4924
3646	Care has been taken to ensure that libev does not keep local state inside	4925	Care has been taken to ensure that libev does not keep local state inside
3647	C<ev_loop>, and other calls do not usually allow for coroutine switches as	4926	C<ev_run>, and other calls do not usually allow for coroutine switches as
3648	they do not call any callbacks.	4927	they do not call any callbacks.
3649		4928
3650	=head2 COMPILER WARNINGS	4929	=head2 COMPILER WARNINGS
3651		4930
3652	Depending on your compiler and compiler settings, you might get no or a	4931	Depending on your compiler and compiler settings, you might get no or a
…		…
3663	maintainable.	4942	maintainable.
3664		4943
3665	And of course, some compiler warnings are just plain stupid, or simply	4944	And of course, some compiler warnings are just plain stupid, or simply
3666	wrong (because they don't actually warn about the condition their message	4945	wrong (because they don't actually warn about the condition their message
3667	seems to warn about). For example, certain older gcc versions had some	4946	seems to warn about). For example, certain older gcc versions had some
3668	warnings that resulted an extreme number of false positives. These have	4947	warnings that resulted in an extreme number of false positives. These have
3669	been fixed, but some people still insist on making code warn-free with	4948	been fixed, but some people still insist on making code warn-free with
3670	such buggy versions.	4949	such buggy versions.
3671		4950
3672	While libev is written to generate as few warnings as possible,	4951	While libev is written to generate as few warnings as possible,
3673	"warn-free" code is not a goal, and it is recommended not to build libev	4952	"warn-free" code is not a goal, and it is recommended not to build libev
…		…
3709	I suggest using suppression lists.	4988	I suggest using suppression lists.
3710		4989
3711		4990
3712	=head1 PORTABILITY NOTES	4991	=head1 PORTABILITY NOTES
3713		4992
		4993	=head2 GNU/LINUX 32 BIT LIMITATIONS
		4994
		4995	GNU/Linux is the only common platform that supports 64 bit file/large file
		4996	interfaces but I<disables> them by default.
		4997
		4998	That means that libev compiled in the default environment doesn't support
		4999	files larger than 2GiB or so, which mainly affects C<ev_stat> watchers.
		5000
		5001	Unfortunately, many programs try to work around this GNU/Linux issue
		5002	by enabling the large file API, which makes them incompatible with the
		5003	standard libev compiled for their system.
		5004
		5005	Likewise, libev cannot enable the large file API itself as this would
		5006	suddenly make it incompatible to the default compile time environment,
		5007	i.e. all programs not using special compile switches.
		5008
		5009	=head2 OS/X AND DARWIN BUGS
		5010
		5011	The whole thing is a bug if you ask me - basically any system interface
		5012	you touch is broken, whether it is locales, poll, kqueue or even the
		5013	OpenGL drivers.
		5014
		5015	=head3 C<kqueue> is buggy
		5016
		5017	The kqueue syscall is broken in all known versions - most versions support
		5018	only sockets, many support pipes.
		5019
		5020	Libev tries to work around this by not using C<kqueue> by default on this
		5021	rotten platform, but of course you can still ask for it when creating a
		5022	loop - embedding a socket-only kqueue loop into a select-based one is
		5023	probably going to work well.
		5024
		5025	=head3 C<poll> is buggy
		5026
		5027	Instead of fixing C<kqueue>, Apple replaced their (working) C<poll>
		5028	implementation by something calling C<kqueue> internally around the 10.5.6
		5029	release, so now C<kqueue> I<and> C<poll> are broken.
		5030
		5031	Libev tries to work around this by not using C<poll> by default on
		5032	this rotten platform, but of course you can still ask for it when creating
		5033	a loop.
		5034
		5035	=head3 C<select> is buggy
		5036
		5037	All that's left is C<select>, and of course Apple found a way to fuck this
		5038	one up as well: On OS/X, C<select> actively limits the number of file
		5039	descriptors you can pass in to 1024 - your program suddenly crashes when
		5040	you use more.
		5041
		5042	There is an undocumented "workaround" for this - defining
		5043	C<_DARWIN_UNLIMITED_SELECT>, which libev tries to use, so select I<should>
		5044	work on OS/X.
		5045
		5046	=head2 SOLARIS PROBLEMS AND WORKAROUNDS
		5047
		5048	=head3 C<errno> reentrancy
		5049
		5050	The default compile environment on Solaris is unfortunately so
		5051	thread-unsafe that you can't even use components/libraries compiled
		5052	without C<-D_REENTRANT> in a threaded program, which, of course, isn't
		5053	defined by default. A valid, if stupid, implementation choice.
		5054
		5055	If you want to use libev in threaded environments you have to make sure
		5056	it's compiled with C<_REENTRANT> defined.
		5057
		5058	=head3 Event port backend
		5059
		5060	The scalable event interface for Solaris is called "event
		5061	ports". Unfortunately, this mechanism is very buggy in all major
		5062	releases. If you run into high CPU usage, your program freezes or you get
		5063	a large number of spurious wakeups, make sure you have all the relevant
		5064	and latest kernel patches applied. No, I don't know which ones, but there
		5065	are multiple ones to apply, and afterwards, event ports actually work
		5066	great.
		5067
		5068	If you can't get it to work, you can try running the program by setting
		5069	the environment variable C<LIBEV_FLAGS=3> to only allow C<poll> and
		5070	C<select> backends.
		5071
		5072	=head2 AIX POLL BUG
		5073
		5074	AIX unfortunately has a broken C<poll.h> header. Libev works around
		5075	this by trying to avoid the poll backend altogether (i.e. it's not even
		5076	compiled in), which normally isn't a big problem as C<select> works fine
		5077	with large bitsets on AIX, and AIX is dead anyway.
		5078
3714	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS	5079	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
		5080
		5081	=head3 General issues
3715		5082
3716	Win32 doesn't support any of the standards (e.g. POSIX) that libev	5083	Win32 doesn't support any of the standards (e.g. POSIX) that libev
3717	requires, and its I/O model is fundamentally incompatible with the POSIX	5084	requires, and its I/O model is fundamentally incompatible with the POSIX
3718	model. Libev still offers limited functionality on this platform in	5085	model. Libev still offers limited functionality on this platform in
3719	the form of the C<EVBACKEND_SELECT> backend, and only supports socket	5086	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
3720	descriptors. This only applies when using Win32 natively, not when using	5087	descriptors. This only applies when using Win32 natively, not when using
3721	e.g. cygwin.	5088	e.g. cygwin. Actually, it only applies to the microsofts own compilers,
		5089	as every compiler comes with a slightly differently broken/incompatible
		5090	environment.
3722		5091
3723	Lifting these limitations would basically require the full	5092	Lifting these limitations would basically require the full
3724	re-implementation of the I/O system. If you are into these kinds of	5093	re-implementation of the I/O system. If you are into this kind of thing,
3725	things, then note that glib does exactly that for you in a very portable	5094	then note that glib does exactly that for you in a very portable way (note
3726	way (note also that glib is the slowest event library known to man).	5095	also that glib is the slowest event library known to man).
3727		5096
3728	There is no supported compilation method available on windows except	5097	There is no supported compilation method available on windows except
3729	embedding it into other applications.	5098	embedding it into other applications.
		5099
		5100	Sensible signal handling is officially unsupported by Microsoft - libev
		5101	tries its best, but under most conditions, signals will simply not work.
3730		5102
3731	Not a libev limitation but worth mentioning: windows apparently doesn't	5103	Not a libev limitation but worth mentioning: windows apparently doesn't
3732	accept large writes: instead of resulting in a partial write, windows will	5104	accept large writes: instead of resulting in a partial write, windows will
3733	either accept everything or return C<ENOBUFS> if the buffer is too large,	5105	either accept everything or return C<ENOBUFS> if the buffer is too large,
3734	so make sure you only write small amounts into your sockets (less than a	5106	so make sure you only write small amounts into your sockets (less than a
…		…
3739	the abysmal performance of winsockets, using a large number of sockets	5111	the abysmal performance of winsockets, using a large number of sockets
3740	is not recommended (and not reasonable). If your program needs to use	5112	is not recommended (and not reasonable). If your program needs to use
3741	more than a hundred or so sockets, then likely it needs to use a totally	5113	more than a hundred or so sockets, then likely it needs to use a totally
3742	different implementation for windows, as libev offers the POSIX readiness	5114	different implementation for windows, as libev offers the POSIX readiness
3743	notification model, which cannot be implemented efficiently on windows	5115	notification model, which cannot be implemented efficiently on windows
3744	(Microsoft monopoly games).	5116	(due to Microsoft monopoly games).
3745		5117
3746	A typical way to use libev under windows is to embed it (see the embedding	5118	A typical way to use libev under windows is to embed it (see the embedding
3747	section for details) and use the following F<evwrap.h> header file instead	5119	section for details) and use the following F<evwrap.h> header file instead
3748	of F<ev.h>:	5120	of F<ev.h>:
3749		5121
…		…
3756	you do I<not> compile the F<ev.c> or any other embedded source files!):	5128	you do I<not> compile the F<ev.c> or any other embedded source files!):
3757		5129
3758	#include "evwrap.h"	5130	#include "evwrap.h"
3759	#include "ev.c"	5131	#include "ev.c"
3760		5132
3761	=over 4
3762
3763	=item The winsocket select function	5133	=head3 The winsocket C<select> function
3764		5134
3765	The winsocket C<select> function doesn't follow POSIX in that it	5135	The winsocket C<select> function doesn't follow POSIX in that it
3766	requires socket I<handles> and not socket I<file descriptors> (it is	5136	requires socket I<handles> and not socket I<file descriptors> (it is
3767	also extremely buggy). This makes select very inefficient, and also	5137	also extremely buggy). This makes select very inefficient, and also
3768	requires a mapping from file descriptors to socket handles (the Microsoft	5138	requires a mapping from file descriptors to socket handles (the Microsoft
…		…
3777	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */	5147	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
3778		5148
3779	Note that winsockets handling of fd sets is O(n), so you can easily get a	5149	Note that winsockets handling of fd sets is O(n), so you can easily get a
3780	complexity in the O(n²) range when using win32.	5150	complexity in the O(n²) range when using win32.
3781		5151
3782	=item Limited number of file descriptors	5152	=head3 Limited number of file descriptors
3783		5153
3784	Windows has numerous arbitrary (and low) limits on things.	5154	Windows has numerous arbitrary (and low) limits on things.
3785		5155
3786	Early versions of winsocket's select only supported waiting for a maximum	5156	Early versions of winsocket's select only supported waiting for a maximum
3787	of C<64> handles (probably owning to the fact that all windows kernels	5157	of C<64> handles (probably owning to the fact that all windows kernels
3788	can only wait for C<64> things at the same time internally; Microsoft	5158	can only wait for C<64> things at the same time internally; Microsoft
3789	recommends spawning a chain of threads and wait for 63 handles and the	5159	recommends spawning a chain of threads and wait for 63 handles and the
3790	previous thread in each. Great).	5160	previous thread in each. Sounds great!).
3791		5161
3792	Newer versions support more handles, but you need to define C<FD_SETSIZE>	5162	Newer versions support more handles, but you need to define C<FD_SETSIZE>
3793	to some high number (e.g. C<2048>) before compiling the winsocket select	5163	to some high number (e.g. C<2048>) before compiling the winsocket select
3794	call (which might be in libev or elsewhere, for example, perl does its own	5164	call (which might be in libev or elsewhere, for example, perl and many
3795	select emulation on windows).	5165	other interpreters do their own select emulation on windows).
3796		5166
3797	Another limit is the number of file descriptors in the Microsoft runtime	5167	Another limit is the number of file descriptors in the Microsoft runtime
3798	libraries, which by default is C<64> (there must be a hidden I<64> fetish	5168	libraries, which by default is C<64> (there must be a hidden I<64>
3799	or something like this inside Microsoft). You can increase this by calling	5169	fetish or something like this inside Microsoft). You can increase this
3800	C<_setmaxstdio>, which can increase this limit to C<2048> (another	5170	by calling C<_setmaxstdio>, which can increase this limit to C<2048>
3801	arbitrary limit), but is broken in many versions of the Microsoft runtime	5171	(another arbitrary limit), but is broken in many versions of the Microsoft
3802	libraries.
3803
3804	This might get you to about C<512> or C<2048> sockets (depending on	5172	runtime libraries. This might get you to about C<512> or C<2048> sockets
3805	windows version and/or the phase of the moon). To get more, you need to	5173	(depending on windows version and/or the phase of the moon). To get more,
3806	wrap all I/O functions and provide your own fd management, but the cost of	5174	you need to wrap all I/O functions and provide your own fd management, but
3807	calling select (O(n²)) will likely make this unworkable.	5175	the cost of calling select (O(n²)) will likely make this unworkable.
3808
3809	=back
3810		5176
3811	=head2 PORTABILITY REQUIREMENTS	5177	=head2 PORTABILITY REQUIREMENTS
3812		5178
3813	In addition to a working ISO-C implementation and of course the	5179	In addition to a working ISO-C implementation and of course the
3814	backend-specific APIs, libev relies on a few additional extensions:	5180	backend-specific APIs, libev relies on a few additional extensions:
…		…
3821	Libev assumes not only that all watcher pointers have the same internal	5187	Libev assumes not only that all watcher pointers have the same internal
3822	structure (guaranteed by POSIX but not by ISO C for example), but it also	5188	structure (guaranteed by POSIX but not by ISO C for example), but it also
3823	assumes that the same (machine) code can be used to call any watcher	5189	assumes that the same (machine) code can be used to call any watcher
3824	callback: The watcher callbacks have different type signatures, but libev	5190	callback: The watcher callbacks have different type signatures, but libev
3825	calls them using an C<ev_watcher *> internally.	5191	calls them using an C<ev_watcher *> internally.
		5192
		5193	=item pointer accesses must be thread-atomic
		5194
		5195	Accessing a pointer value must be atomic, it must both be readable and
		5196	writable in one piece - this is the case on all current architectures.
3826		5197
3827	=item C<sig_atomic_t volatile> must be thread-atomic as well	5198	=item C<sig_atomic_t volatile> must be thread-atomic as well
3828		5199
3829	The type C<sig_atomic_t volatile> (or whatever is defined as	5200	The type C<sig_atomic_t volatile> (or whatever is defined as
3830	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different	5201	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different
…		…
3853	watchers.	5224	watchers.
3854		5225
3855	=item C<double> must hold a time value in seconds with enough accuracy	5226	=item C<double> must hold a time value in seconds with enough accuracy
3856		5227
3857	The type C<double> is used to represent timestamps. It is required to	5228	The type C<double> is used to represent timestamps. It is required to
3858	have at least 51 bits of mantissa (and 9 bits of exponent), which is good	5229	have at least 51 bits of mantissa (and 9 bits of exponent), which is
3859	enough for at least into the year 4000. This requirement is fulfilled by	5230	good enough for at least into the year 4000 with millisecond accuracy
		5231	(the design goal for libev). This requirement is overfulfilled by
3860	implementations implementing IEEE 754 (basically all existing ones).	5232	implementations using IEEE 754, which is basically all existing ones.
		5233
		5234	With IEEE 754 doubles, you get microsecond accuracy until at least the
		5235	year 2255 (and millisecond accuracy till the year 287396 - by then, libev
		5236	is either obsolete or somebody patched it to use C<long double> or
		5237	something like that, just kidding).
3861		5238
3862	=back	5239	=back
3863		5240
3864	If you know of other additional requirements drop me a note.	5241	If you know of other additional requirements drop me a note.
3865		5242
…		…
3927	=item Processing ev_async_send: O(number_of_async_watchers)	5304	=item Processing ev_async_send: O(number_of_async_watchers)
3928		5305
3929	=item Processing signals: O(max_signal_number)	5306	=item Processing signals: O(max_signal_number)
3930		5307
3931	Sending involves a system call I<iff> there were no other C<ev_async_send>	5308	Sending involves a system call I<iff> there were no other C<ev_async_send>
3932	calls in the current loop iteration. Checking for async and signal events	5309	calls in the current loop iteration and the loop is currently
		5310	blocked. Checking for async and signal events involves iterating over all
3933	involves iterating over all running async watchers or all signal numbers.	5311	running async watchers or all signal numbers.
3934		5312
3935	=back	5313	=back
3936		5314
3937		5315
		5316	=head1 PORTING FROM LIBEV 3.X TO 4.X
		5317
		5318	The major version 4 introduced some incompatible changes to the API.
		5319
		5320	At the moment, the C<ev.h> header file provides compatibility definitions
		5321	for all changes, so most programs should still compile. The compatibility
		5322	layer might be removed in later versions of libev, so better update to the
		5323	new API early than late.
		5324
		5325	=over 4
		5326
		5327	=item C<EV_COMPAT3> backwards compatibility mechanism
		5328
		5329	The backward compatibility mechanism can be controlled by
		5330	C<EV_COMPAT3>. See L<PREPROCESSOR SYMBOLS/MACROS> in the L<EMBEDDING>
		5331	section.
		5332
		5333	=item C<ev_default_destroy> and C<ev_default_fork> have been removed
		5334
		5335	These calls can be replaced easily by their C<ev_loop_xxx> counterparts:
		5336
		5337	ev_loop_destroy (EV_DEFAULT_UC);
		5338	ev_loop_fork (EV_DEFAULT);
		5339
		5340	=item function/symbol renames
		5341
		5342	A number of functions and symbols have been renamed:
		5343
		5344	ev_loop => ev_run
		5345	EVLOOP_NONBLOCK => EVRUN_NOWAIT
		5346	EVLOOP_ONESHOT => EVRUN_ONCE
		5347
		5348	ev_unloop => ev_break
		5349	EVUNLOOP_CANCEL => EVBREAK_CANCEL
		5350	EVUNLOOP_ONE => EVBREAK_ONE
		5351	EVUNLOOP_ALL => EVBREAK_ALL
		5352
		5353	EV_TIMEOUT => EV_TIMER
		5354
		5355	ev_loop_count => ev_iteration
		5356	ev_loop_depth => ev_depth
		5357	ev_loop_verify => ev_verify
		5358
		5359	Most functions working on C<struct ev_loop> objects don't have an
		5360	C<ev_loop_> prefix, so it was removed; C<ev_loop>, C<ev_unloop> and
		5361	associated constants have been renamed to not collide with the C<struct
		5362	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme
		5363	as all other watcher types. Note that C<ev_loop_fork> is still called
		5364	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>
		5365	typedef.
		5366
		5367	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>
		5368
		5369	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different
		5370	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile
		5371	and work, but the library code will of course be larger.
		5372
		5373	=back
		5374
		5375
		5376	=head1 GLOSSARY
		5377
		5378	=over 4
		5379
		5380	=item active
		5381
		5382	A watcher is active as long as it has been started and not yet stopped.
		5383	See L<WATCHER STATES> for details.
		5384
		5385	=item application
		5386
		5387	In this document, an application is whatever is using libev.
		5388
		5389	=item backend
		5390
		5391	The part of the code dealing with the operating system interfaces.
		5392
		5393	=item callback
		5394
		5395	The address of a function that is called when some event has been
		5396	detected. Callbacks are being passed the event loop, the watcher that
		5397	received the event, and the actual event bitset.
		5398
		5399	=item callback/watcher invocation
		5400
		5401	The act of calling the callback associated with a watcher.
		5402
		5403	=item event
		5404
		5405	A change of state of some external event, such as data now being available
		5406	for reading on a file descriptor, time having passed or simply not having
		5407	any other events happening anymore.
		5408
		5409	In libev, events are represented as single bits (such as C<EV_READ> or
		5410	C<EV_TIMER>).
		5411
		5412	=item event library
		5413
		5414	A software package implementing an event model and loop.
		5415
		5416	=item event loop
		5417
		5418	An entity that handles and processes external events and converts them
		5419	into callback invocations.
		5420
		5421	=item event model
		5422
		5423	The model used to describe how an event loop handles and processes
		5424	watchers and events.
		5425
		5426	=item pending
		5427
		5428	A watcher is pending as soon as the corresponding event has been
		5429	detected. See L<WATCHER STATES> for details.
		5430
		5431	=item real time
		5432
		5433	The physical time that is observed. It is apparently strictly monotonic :)
		5434
		5435	=item wall-clock time
		5436
		5437	The time and date as shown on clocks. Unlike real time, it can actually
		5438	be wrong and jump forwards and backwards, e.g. when you adjust your
		5439	clock.
		5440
		5441	=item watcher
		5442
		5443	A data structure that describes interest in certain events. Watchers need
		5444	to be started (attached to an event loop) before they can receive events.
		5445
		5446	=back
		5447
3938	=head1 AUTHOR	5448	=head1 AUTHOR
3939		5449
3940	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael Magnusson.	5450	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael
		5451	Magnusson and Emanuele Giaquinta, and minor corrections by many others.
3941		5452

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines