ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.191 by root, Tue Sep 30 19:45:23 2008 UTC vs.
Revision 1.426 by root, Sat Feb 23 23:06:40 2013 UTC

…		…
9	=head2 EXAMPLE PROGRAM	9	=head2 EXAMPLE PROGRAM
10		10
11	// a single header file is required	11	// a single header file is required
12	#include <ev.h>	12	#include <ev.h>
13		13
		14	#include <stdio.h> // for puts
		15
14	// every watcher type has its own typedef'd struct	16	// every watcher type has its own typedef'd struct
15	// with the name ev_<type>	17	// with the name ev_TYPE
16	ev_io stdin_watcher;	18	ev_io stdin_watcher;
17	ev_timer timeout_watcher;	19	ev_timer timeout_watcher;
18		20
19	// all watcher callbacks have a similar signature	21	// all watcher callbacks have a similar signature
20	// this callback is called when data is readable on stdin	22	// this callback is called when data is readable on stdin
21	static void	23	static void
22	stdin_cb (EV_P_ struct ev_io *w, int revents)	24	stdin_cb (EV_P_ ev_io *w, int revents)
23	{	25	{
24	puts ("stdin ready");	26	puts ("stdin ready");
25	// for one-shot events, one must manually stop the watcher	27	// for one-shot events, one must manually stop the watcher
26	// with its corresponding stop function.	28	// with its corresponding stop function.
27	ev_io_stop (EV_A_ w);	29	ev_io_stop (EV_A_ w);
28		30
29	// this causes all nested ev_loop's to stop iterating	31	// this causes all nested ev_run's to stop iterating
30	ev_unloop (EV_A_ EVUNLOOP_ALL);	32	ev_break (EV_A_ EVBREAK_ALL);
31	}	33	}
32		34
33	// another callback, this time for a time-out	35	// another callback, this time for a time-out
34	static void	36	static void
35	timeout_cb (EV_P_ struct ev_timer *w, int revents)	37	timeout_cb (EV_P_ ev_timer *w, int revents)
36	{	38	{
37	puts ("timeout");	39	puts ("timeout");
38	// this causes the innermost ev_loop to stop iterating	40	// this causes the innermost ev_run to stop iterating
39	ev_unloop (EV_A_ EVUNLOOP_ONE);	41	ev_break (EV_A_ EVBREAK_ONE);
40	}	42	}
41		43
42	int	44	int
43	main (void)	45	main (void)
44	{	46	{
45	// use the default event loop unless you have special needs	47	// use the default event loop unless you have special needs
46	struct ev_loop *loop = ev_default_loop (0);	48	struct ev_loop *loop = EV_DEFAULT;
47		49
48	// initialise an io watcher, then start it	50	// initialise an io watcher, then start it
49	// this one will watch for stdin to become readable	51	// this one will watch for stdin to become readable
50	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
51	ev_io_start (loop, &stdin_watcher);	53	ev_io_start (loop, &stdin_watcher);
…		…
54	// simple non-repeating 5.5 second timeout	56	// simple non-repeating 5.5 second timeout
55	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	57	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
56	ev_timer_start (loop, &timeout_watcher);	58	ev_timer_start (loop, &timeout_watcher);
57		59
58	// now wait for events to arrive	60	// now wait for events to arrive
59	ev_loop (loop, 0);	61	ev_run (loop, 0);
60		62
61	// unloop was called, so exit	63	// break was called, so exit
62	return 0;	64	return 0;
63	}	65	}
64		66
65	=head1 DESCRIPTION	67	=head1 ABOUT THIS DOCUMENT
		68
		69	This document documents the libev software package.
66		70
67	The newest version of this document is also available as an html-formatted	71	The newest version of this document is also available as an html-formatted
68	web page you might find easier to navigate when reading it for the first	72	web page you might find easier to navigate when reading it for the first
69	time: L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.	73	time: L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.
		74
		75	While this document tries to be as complete as possible in documenting
		76	libev, its usage and the rationale behind its design, it is not a tutorial
		77	on event-based programming, nor will it introduce event-based programming
		78	with libev.
		79
		80	Familiarity with event based programming techniques in general is assumed
		81	throughout this document.
		82
		83	=head1 WHAT TO READ WHEN IN A HURRY
		84
		85	This manual tries to be very detailed, but unfortunately, this also makes
		86	it very long. If you just want to know the basics of libev, I suggest
		87	reading L</ANATOMY OF A WATCHER>, then the L</EXAMPLE PROGRAM> above and
		88	look up the missing functions in L</GLOBAL FUNCTIONS> and the C<ev_io> and
		89	C<ev_timer> sections in L</WATCHER TYPES>.
		90
		91	=head1 ABOUT LIBEV
70		92
71	Libev is an event loop: you register interest in certain events (such as a	93	Libev is an event loop: you register interest in certain events (such as a
72	file descriptor being readable or a timeout occurring), and it will manage	94	file descriptor being readable or a timeout occurring), and it will manage
73	these event sources and provide your program with events.	95	these event sources and provide your program with events.
74		96
…		…
84	=head2 FEATURES	106	=head2 FEATURES
85		107
86	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	108	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
87	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	109	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
88	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	110	for file descriptor events (C<ev_io>), the Linux C<inotify> interface
89	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers	111	(for C<ev_stat>), Linux eventfd/signalfd (for faster and cleaner
90	with customised rescheduling (C<ev_periodic>), synchronous signals	112	inter-thread wakeup (C<ev_async>)/signal handling (C<ev_signal>)) relative
91	(C<ev_signal>), process status change events (C<ev_child>), and event	113	timers (C<ev_timer>), absolute timers with customised rescheduling
92	watchers dealing with the event loop mechanism itself (C<ev_idle>,	114	(C<ev_periodic>), synchronous signals (C<ev_signal>), process status
93	C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as	115	change events (C<ev_child>), and event watchers dealing with the event
94	file watchers (C<ev_stat>) and even limited support for fork events	116	loop mechanism itself (C<ev_idle>, C<ev_embed>, C<ev_prepare> and
95	(C<ev_fork>).	117	C<ev_check> watchers) as well as file watchers (C<ev_stat>) and even
		118	limited support for fork events (C<ev_fork>).
96		119
97	It also is quite fast (see this	120	It also is quite fast (see this
98	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent	121	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
99	for example).	122	for example).
100		123
…		…
108	name C<loop> (which is always of type C<struct ev_loop *>) will not have	131	name C<loop> (which is always of type C<struct ev_loop *>) will not have
109	this argument.	132	this argument.
110		133
111	=head2 TIME REPRESENTATION	134	=head2 TIME REPRESENTATION
112		135
113	Libev represents time as a single floating point number, representing the	136	Libev represents time as a single floating point number, representing
114	(fractional) number of seconds since the (POSIX) epoch (somewhere near	137	the (fractional) number of seconds since the (POSIX) epoch (in practice
115	the beginning of 1970, details are complicated, don't ask). This type is	138	somewhere near the beginning of 1970, details are complicated, don't
116	called C<ev_tstamp>, which is what you should use too. It usually aliases	139	ask). This type is called C<ev_tstamp>, which is what you should use
117	to the C<double> type in C, and when you need to do any calculations on	140	too. It usually aliases to the C<double> type in C. When you need to do
118	it, you should treat it as some floating point value. Unlike the name	141	any calculations on it, you should treat it as some floating point value.
		142
119	component C<stamp> might indicate, it is also used for time differences	143	Unlike the name component C<stamp> might indicate, it is also used for
120	throughout libev.	144	time differences (e.g. delays) throughout libev.
121		145
122	=head1 ERROR HANDLING	146	=head1 ERROR HANDLING
123		147
124	Libev knows three classes of errors: operating system errors, usage errors	148	Libev knows three classes of errors: operating system errors, usage errors
125	and internal errors (bugs).	149	and internal errors (bugs).
…		…
149		173
150	=item ev_tstamp ev_time ()	174	=item ev_tstamp ev_time ()
151		175
152	Returns the current time as libev would use it. Please note that the	176	Returns the current time as libev would use it. Please note that the
153	C<ev_now> function is usually faster and also often returns the timestamp	177	C<ev_now> function is usually faster and also often returns the timestamp
154	you actually want to know.	178	you actually want to know. Also interesting is the combination of
		179	C<ev_now_update> and C<ev_now>.
155		180
156	=item ev_sleep (ev_tstamp interval)	181	=item ev_sleep (ev_tstamp interval)
157		182
158	Sleep for the given interval: The current thread will be blocked until	183	Sleep for the given interval: The current thread will be blocked
159	either it is interrupted or the given time interval has passed. Basically	184	until either it is interrupted or the given time interval has
		185	passed (approximately - it might return a bit earlier even if not
		186	interrupted). Returns immediately if C<< interval <= 0 >>.
		187
160	this is a sub-second-resolution C<sleep ()>.	188	Basically this is a sub-second-resolution C<sleep ()>.
		189
		190	The range of the C<interval> is limited - libev only guarantees to work
		191	with sleep times of up to one day (C<< interval <= 86400 >>).
161		192
162	=item int ev_version_major ()	193	=item int ev_version_major ()
163		194
164	=item int ev_version_minor ()	195	=item int ev_version_minor ()
165		196
…		…
176	as this indicates an incompatible change. Minor versions are usually	207	as this indicates an incompatible change. Minor versions are usually
177	compatible to older versions, so a larger minor version alone is usually	208	compatible to older versions, so a larger minor version alone is usually
178	not a problem.	209	not a problem.
179		210
180	Example: Make sure we haven't accidentally been linked against the wrong	211	Example: Make sure we haven't accidentally been linked against the wrong
181	version.	212	version (note, however, that this will not detect other ABI mismatches,
		213	such as LFS or reentrancy).
182		214
183	assert (("libev version mismatch",	215	assert (("libev version mismatch",
184	ev_version_major () == EV_VERSION_MAJOR	216	ev_version_major () == EV_VERSION_MAJOR
185	&& ev_version_minor () >= EV_VERSION_MINOR));	217	&& ev_version_minor () >= EV_VERSION_MINOR));
186		218
…		…
197	assert (("sorry, no epoll, no sex",	229	assert (("sorry, no epoll, no sex",
198	ev_supported_backends () & EVBACKEND_EPOLL));	230	ev_supported_backends () & EVBACKEND_EPOLL));
199		231
200	=item unsigned int ev_recommended_backends ()	232	=item unsigned int ev_recommended_backends ()
201		233
202	Return the set of all backends compiled into this binary of libev and also	234	Return the set of all backends compiled into this binary of libev and
203	recommended for this platform. This set is often smaller than the one	235	also recommended for this platform, meaning it will work for most file
		236	descriptor types. This set is often smaller than the one returned by
204	returned by C<ev_supported_backends>, as for example kqueue is broken on	237	C<ev_supported_backends>, as for example kqueue is broken on most BSDs
205	most BSDs and will not be auto-detected unless you explicitly request it	238	and will not be auto-detected unless you explicitly request it (assuming
206	(assuming you know what you are doing). This is the set of backends that	239	you know what you are doing). This is the set of backends that libev will
207	libev will probe for if you specify no backends explicitly.	240	probe for if you specify no backends explicitly.
208		241
209	=item unsigned int ev_embeddable_backends ()	242	=item unsigned int ev_embeddable_backends ()
210		243
211	Returns the set of backends that are embeddable in other event loops. This	244	Returns the set of backends that are embeddable in other event loops. This
212	is the theoretical, all-platform, value. To find which backends	245	value is platform-specific but can include backends not available on the
213	might be supported on the current system, you would need to look at	246	current system. To find which embeddable backends might be supported on
214	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for	247	the current system, you would need to look at C<ev_embeddable_backends ()
215	recommended ones.	248	& ev_supported_backends ()>, likewise for recommended ones.
216		249
217	See the description of C<ev_embed> watchers for more info.	250	See the description of C<ev_embed> watchers for more info.
218		251
219	=item ev_set_allocator (void *(*cb)(void *ptr, long size)) [NOT REENTRANT]	252	=item ev_set_allocator (void *(*cb)(void *ptr, long size) throw ())
220		253
221	Sets the allocation function to use (the prototype is similar - the	254	Sets the allocation function to use (the prototype is similar - the
222	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is	255	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
223	used to allocate and free memory (no surprises here). If it returns zero	256	used to allocate and free memory (no surprises here). If it returns zero
224	when memory needs to be allocated (C<size != 0>), the library might abort	257	when memory needs to be allocated (C<size != 0>), the library might abort
…		…
250	}	283	}
251		284
252	...	285	...
253	ev_set_allocator (persistent_realloc);	286	ev_set_allocator (persistent_realloc);
254		287
255	=item ev_set_syserr_cb (void (*cb)(const char *msg)); [NOT REENTRANT]	288	=item ev_set_syserr_cb (void (*cb)(const char *msg) throw ())
256		289
257	Set the callback function to call on a retryable system call error (such	290	Set the callback function to call on a retryable system call error (such
258	as failed select, poll, epoll_wait). The message is a printable string	291	as failed select, poll, epoll_wait). The message is a printable string
259	indicating the system call or subsystem causing the problem. If this	292	indicating the system call or subsystem causing the problem. If this
260	callback is set, then libev will expect it to remedy the situation, no	293	callback is set, then libev will expect it to remedy the situation, no
…		…
272	}	305	}
273		306
274	...	307	...
275	ev_set_syserr_cb (fatal_error);	308	ev_set_syserr_cb (fatal_error);
276		309
		310	=item ev_feed_signal (int signum)
		311
		312	This function can be used to "simulate" a signal receive. It is completely
		313	safe to call this function at any time, from any context, including signal
		314	handlers or random threads.
		315
		316	Its main use is to customise signal handling in your process, especially
		317	in the presence of threads. For example, you could block signals
		318	by default in all threads (and specifying C<EVFLAG_NOSIGMASK> when
		319	creating any loops), and in one thread, use C<sigwait> or any other
		320	mechanism to wait for signals, then "deliver" them to libev by calling
		321	C<ev_feed_signal>.
		322
277	=back	323	=back
278		324
279	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	325	=head1 FUNCTIONS CONTROLLING EVENT LOOPS
280		326
281	An event loop is described by a C<struct ev_loop *>. The library knows two	327	An event loop is described by a C<struct ev_loop *> (the C<struct> is
282	types of such loops, the I<default> loop, which supports signals and child	328	I<not> optional in this case unless libev 3 compatibility is disabled, as
283	events, and dynamically created loops which do not.	329	libev 3 had an C<ev_loop> function colliding with the struct name).
		330
		331	The library knows two types of such loops, the I<default> loop, which
		332	supports child process events, and dynamically created event loops which
		333	do not.
284		334
285	=over 4	335	=over 4
286		336
287	=item struct ev_loop *ev_default_loop (unsigned int flags)	337	=item struct ev_loop *ev_default_loop (unsigned int flags)
288		338
289	This will initialise the default event loop if it hasn't been initialised	339	This returns the "default" event loop object, which is what you should
290	yet and return it. If the default loop could not be initialised, returns	340	normally use when you just need "the event loop". Event loop objects and
291	false. If it already was initialised it simply returns it (and ignores the	341	the C<flags> parameter are described in more detail in the entry for
292	flags. If that is troubling you, check C<ev_backend ()> afterwards).	342	C<ev_loop_new>.
		343
		344	If the default loop is already initialised then this function simply
		345	returns it (and ignores the flags. If that is troubling you, check
		346	C<ev_backend ()> afterwards). Otherwise it will create it with the given
		347	flags, which should almost always be C<0>, unless the caller is also the
		348	one calling C<ev_run> or otherwise qualifies as "the main program".
293		349
294	If you don't know what event loop to use, use the one returned from this	350	If you don't know what event loop to use, use the one returned from this
295	function.	351	function (or via the C<EV_DEFAULT> macro).
296		352
297	Note that this function is I<not> thread-safe, so if you want to use it	353	Note that this function is I<not> thread-safe, so if you want to use it
298	from multiple threads, you have to lock (note also that this is unlikely,	354	from multiple threads, you have to employ some kind of mutex (note also
299	as loops cannot bes hared easily between threads anyway).	355	that this case is unlikely, as loops cannot be shared easily between
		356	threads anyway).
300		357
301	The default loop is the only loop that can handle C<ev_signal> and	358	The default loop is the only loop that can handle C<ev_child> watchers,
302	C<ev_child> watchers, and to do this, it always registers a handler	359	and to do this, it always registers a handler for C<SIGCHLD>. If this is
303	for C<SIGCHLD>. If this is a problem for your application you can either	360	a problem for your application you can either create a dynamic loop with
304	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you	361	C<ev_loop_new> which doesn't do that, or you can simply overwrite the
305	can simply overwrite the C<SIGCHLD> signal handler I<after> calling	362	C<SIGCHLD> signal handler I<after> calling C<ev_default_init>.
306	C<ev_default_init>.	363
		364	Example: This is the most typical usage.
		365
		366	if (!ev_default_loop (0))
		367	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		368
		369	Example: Restrict libev to the select and poll backends, and do not allow
		370	environment settings to be taken into account:
		371
		372	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
		373
		374	=item struct ev_loop *ev_loop_new (unsigned int flags)
		375
		376	This will create and initialise a new event loop object. If the loop
		377	could not be initialised, returns false.
		378
		379	This function is thread-safe, and one common way to use libev with
		380	threads is indeed to create one loop per thread, and using the default
		381	loop in the "main" or "initial" thread.
307		382
308	The flags argument can be used to specify special behaviour or specific	383	The flags argument can be used to specify special behaviour or specific
309	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	384	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
310		385
311	The following flags are supported:	386	The following flags are supported:
…		…
326	useful to try out specific backends to test their performance, or to work	401	useful to try out specific backends to test their performance, or to work
327	around bugs.	402	around bugs.
328		403
329	=item C<EVFLAG_FORKCHECK>	404	=item C<EVFLAG_FORKCHECK>
330		405
331	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after	406	Instead of calling C<ev_loop_fork> manually after a fork, you can also
332	a fork, you can also make libev check for a fork in each iteration by	407	make libev check for a fork in each iteration by enabling this flag.
333	enabling this flag.
334		408
335	This works by calling C<getpid ()> on every iteration of the loop,	409	This works by calling C<getpid ()> on every iteration of the loop,
336	and thus this might slow down your event loop if you do a lot of loop	410	and thus this might slow down your event loop if you do a lot of loop
337	iterations and little real work, but is usually not noticeable (on my	411	iterations and little real work, but is usually not noticeable (on my
338	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence	412	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence
…		…
344	flag.	418	flag.
345		419
346	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>	420	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>
347	environment variable.	421	environment variable.
348		422
		423	=item C<EVFLAG_NOINOTIFY>
		424
		425	When this flag is specified, then libev will not attempt to use the
		426	I<inotify> API for its C<ev_stat> watchers. Apart from debugging and
		427	testing, this flag can be useful to conserve inotify file descriptors, as
		428	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.
		429
		430	=item C<EVFLAG_SIGNALFD>
		431
		432	When this flag is specified, then libev will attempt to use the
		433	I<signalfd> API for its C<ev_signal> (and C<ev_child>) watchers. This API
		434	delivers signals synchronously, which makes it both faster and might make
		435	it possible to get the queued signal data. It can also simplify signal
		436	handling with threads, as long as you properly block signals in your
		437	threads that are not interested in handling them.
		438
		439	Signalfd will not be used by default as this changes your signal mask, and
		440	there are a lot of shoddy libraries and programs (glib's threadpool for
		441	example) that can't properly initialise their signal masks.
		442
		443	=item C<EVFLAG_NOSIGMASK>
		444
		445	When this flag is specified, then libev will avoid to modify the signal
		446	mask. Specifically, this means you have to make sure signals are unblocked
		447	when you want to receive them.
		448
		449	This behaviour is useful when you want to do your own signal handling, or
		450	want to handle signals only in specific threads and want to avoid libev
		451	unblocking the signals.
		452
		453	It's also required by POSIX in a threaded program, as libev calls
		454	C<sigprocmask>, whose behaviour is officially unspecified.
		455
		456	This flag's behaviour will become the default in future versions of libev.
		457
349	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	458	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
350		459
351	This is your standard select(2) backend. Not I<completely> standard, as	460	This is your standard select(2) backend. Not I<completely> standard, as
352	libev tries to roll its own fd_set with no limits on the number of fds,	461	libev tries to roll its own fd_set with no limits on the number of fds,
353	but if that fails, expect a fairly low limit on the number of fds when	462	but if that fails, expect a fairly low limit on the number of fds when
…		…
377	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and	486	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and
378	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.	487	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.
379		488
380	=item C<EVBACKEND_EPOLL> (value 4, Linux)	489	=item C<EVBACKEND_EPOLL> (value 4, Linux)
381		490
		491	Use the linux-specific epoll(7) interface (for both pre- and post-2.6.9
		492	kernels).
		493
382	For few fds, this backend is a bit little slower than poll and select,	494	For few fds, this backend is a bit little slower than poll and select, but
383	but it scales phenomenally better. While poll and select usually scale	495	it scales phenomenally better. While poll and select usually scale like
384	like O(total_fds) where n is the total number of fds (or the highest fd),	496	O(total_fds) where total_fds is the total number of fds (or the highest
385	epoll scales either O(1) or O(active_fds). The epoll design has a number	497	fd), epoll scales either O(1) or O(active_fds).
386	of shortcomings, such as silently dropping events in some hard-to-detect	498
387	cases and requiring a system call per fd change, no fork support and bad	499	The epoll mechanism deserves honorable mention as the most misdesigned
388	support for dup.	500	of the more advanced event mechanisms: mere annoyances include silently
		501	dropping file descriptors, requiring a system call per change per file
		502	descriptor (and unnecessary guessing of parameters), problems with dup,
		503	returning before the timeout value, resulting in additional iterations
		504	(and only giving 5ms accuracy while select on the same platform gives
		505	0.1ms) and so on. The biggest issue is fork races, however - if a program
		506	forks then I<both> parent and child process have to recreate the epoll
		507	set, which can take considerable time (one syscall per file descriptor)
		508	and is of course hard to detect.
		509
		510	Epoll is also notoriously buggy - embedding epoll fds I<should> work,
		511	but of course I<doesn't>, and epoll just loves to report events for
		512	totally I<different> file descriptors (even already closed ones, so
		513	one cannot even remove them from the set) than registered in the set
		514	(especially on SMP systems). Libev tries to counter these spurious
		515	notifications by employing an additional generation counter and comparing
		516	that against the events to filter out spurious ones, recreating the set
		517	when required. Epoll also erroneously rounds down timeouts, but gives you
		518	no way to know when and by how much, so sometimes you have to busy-wait
		519	because epoll returns immediately despite a nonzero timeout. And last
		520	not least, it also refuses to work with some file descriptors which work
		521	perfectly fine with C<select> (files, many character devices...).
		522
		523	Epoll is truly the train wreck among event poll mechanisms, a frankenpoll,
		524	cobbled together in a hurry, no thought to design or interaction with
		525	others. Oh, the pain, will it ever stop...
389		526
390	While stopping, setting and starting an I/O watcher in the same iteration	527	While stopping, setting and starting an I/O watcher in the same iteration
391	will result in some caching, there is still a system call per such incident	528	will result in some caching, there is still a system call per such
392	(because the fd could point to a different file description now), so its	529	incident (because the same I<file descriptor> could point to a different
393	best to avoid that. Also, C<dup ()>'ed file descriptors might not work	530	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed
394	very well if you register events for both fds.	531	file descriptors might not work very well if you register events for both
395		532	file descriptors.
396	Please note that epoll sometimes generates spurious notifications, so you
397	need to use non-blocking I/O or other means to avoid blocking when no data
398	(or space) is available.
399		533
400	Best performance from this backend is achieved by not unregistering all	534	Best performance from this backend is achieved by not unregistering all
401	watchers for a file descriptor until it has been closed, if possible,	535	watchers for a file descriptor until it has been closed, if possible,
402	i.e. keep at least one watcher active per fd at all times. Stopping and	536	i.e. keep at least one watcher active per fd at all times. Stopping and
403	starting a watcher (without re-setting it) also usually doesn't cause	537	starting a watcher (without re-setting it) also usually doesn't cause
404	extra overhead.	538	extra overhead. A fork can both result in spurious notifications as well
		539	as in libev having to destroy and recreate the epoll object, which can
		540	take considerable time and thus should be avoided.
		541
		542	All this means that, in practice, C<EVBACKEND_SELECT> can be as fast or
		543	faster than epoll for maybe up to a hundred file descriptors, depending on
		544	the usage. So sad.
405		545
406	While nominally embeddable in other event loops, this feature is broken in	546	While nominally embeddable in other event loops, this feature is broken in
407	all kernel versions tested so far.	547	all kernel versions tested so far.
408		548
409	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as	549	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
410	C<EVBACKEND_POLL>.	550	C<EVBACKEND_POLL>.
411		551
412	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	552	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
413		553
414	Kqueue deserves special mention, as at the time of this writing, it was	554	Kqueue deserves special mention, as at the time of this writing, it
415	broken on all BSDs except NetBSD (usually it doesn't work reliably with	555	was broken on all BSDs except NetBSD (usually it doesn't work reliably
416	anything but sockets and pipes, except on Darwin, where of course it's	556	with anything but sockets and pipes, except on Darwin, where of course
417	completely useless). For this reason it's not being "auto-detected" unless	557	it's completely useless). Unlike epoll, however, whose brokenness
418	you explicitly specify it in the flags (i.e. using C<EVBACKEND_KQUEUE>) or	558	is by design, these kqueue bugs can (and eventually will) be fixed
419	libev was compiled on a known-to-be-good (-enough) system like NetBSD.	559	without API changes to existing programs. For this reason it's not being
		560	"auto-detected" unless you explicitly specify it in the flags (i.e. using
		561	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)
		562	system like NetBSD.
420		563
421	You still can embed kqueue into a normal poll or select backend and use it	564	You still can embed kqueue into a normal poll or select backend and use it
422	only for sockets (after having made sure that sockets work with kqueue on	565	only for sockets (after having made sure that sockets work with kqueue on
423	the target platform). See C<ev_embed> watchers for more info.	566	the target platform). See C<ev_embed> watchers for more info.
424		567
425	It scales in the same way as the epoll backend, but the interface to the	568	It scales in the same way as the epoll backend, but the interface to the
426	kernel is more efficient (which says nothing about its actual speed, of	569	kernel is more efficient (which says nothing about its actual speed, of
427	course). While stopping, setting and starting an I/O watcher does never	570	course). While stopping, setting and starting an I/O watcher does never
428	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to	571	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to
429	two event changes per incident. Support for C<fork ()> is very bad and it	572	two event changes per incident. Support for C<fork ()> is very bad (you
		573	might have to leak fd's on fork, but it's more sane than epoll) and it
430	drops fds silently in similarly hard-to-detect cases.	574	drops fds silently in similarly hard-to-detect cases.
431		575
432	This backend usually performs well under most conditions.	576	This backend usually performs well under most conditions.
433		577
434	While nominally embeddable in other event loops, this doesn't work	578	While nominally embeddable in other event loops, this doesn't work
435	everywhere, so you might need to test for this. And since it is broken	579	everywhere, so you might need to test for this. And since it is broken
436	almost everywhere, you should only use it when you have a lot of sockets	580	almost everywhere, you should only use it when you have a lot of sockets
437	(for which it usually works), by embedding it into another event loop	581	(for which it usually works), by embedding it into another event loop
438	(e.g. C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>) and, did I mention it,	582	(e.g. C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> (but C<poll> is of course
439	using it only for sockets.	583	also broken on OS X)) and, did I mention it, using it only for sockets.
440		584
441	This backend maps C<EV_READ> into an C<EVFILT_READ> kevent with	585	This backend maps C<EV_READ> into an C<EVFILT_READ> kevent with
442	C<NOTE_EOF>, and C<EV_WRITE> into an C<EVFILT_WRITE> kevent with	586	C<NOTE_EOF>, and C<EV_WRITE> into an C<EVFILT_WRITE> kevent with
443	C<NOTE_EOF>.	587	C<NOTE_EOF>.
444		588
…		…
452	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	596	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
453		597
454	This uses the Solaris 10 event port mechanism. As with everything on Solaris,	598	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
455	it's really slow, but it still scales very well (O(active_fds)).	599	it's really slow, but it still scales very well (O(active_fds)).
456		600
457	Please note that Solaris event ports can deliver a lot of spurious
458	notifications, so you need to use non-blocking I/O or other means to avoid
459	blocking when no data (or space) is available.
460
461	While this backend scales well, it requires one system call per active	601	While this backend scales well, it requires one system call per active
462	file descriptor per loop iteration. For small and medium numbers of file	602	file descriptor per loop iteration. For small and medium numbers of file
463	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend	603	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
464	might perform better.	604	might perform better.
465		605
466	On the positive side, with the exception of the spurious readiness	606	On the positive side, this backend actually performed fully to
467	notifications, this backend actually performed fully to specification
468	in all tests and is fully embeddable, which is a rare feat among the	607	specification in all tests and is fully embeddable, which is a rare feat
469	OS-specific backends.	608	among the OS-specific backends (I vastly prefer correctness over speed
		609	hacks).
		610
		611	On the negative side, the interface is I<bizarre> - so bizarre that
		612	even sun itself gets it wrong in their code examples: The event polling
		613	function sometimes returns events to the caller even though an error
		614	occurred, but with no indication whether it has done so or not (yes, it's
		615	even documented that way) - deadly for edge-triggered interfaces where you
		616	absolutely have to know whether an event occurred or not because you have
		617	to re-arm the watcher.
		618
		619	Fortunately libev seems to be able to work around these idiocies.
470		620
471	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as	621	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
472	C<EVBACKEND_POLL>.	622	C<EVBACKEND_POLL>.
473		623
474	=item C<EVBACKEND_ALL>	624	=item C<EVBACKEND_ALL>
475		625
476	Try all backends (even potentially broken ones that wouldn't be tried	626	Try all backends (even potentially broken ones that wouldn't be tried
477	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	627	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
478	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	628	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
479		629
480	It is definitely not recommended to use this flag.	630	It is definitely not recommended to use this flag, use whatever
		631	C<ev_recommended_backends ()> returns, or simply do not specify a backend
		632	at all.
		633
		634	=item C<EVBACKEND_MASK>
		635
		636	Not a backend at all, but a mask to select all backend bits from a
		637	C<flags> value, in case you want to mask out any backends from a flags
		638	value (e.g. when modifying the C<LIBEV_FLAGS> environment variable).
481		639
482	=back	640	=back
483		641
484	If one or more of these are or'ed into the flags value, then only these	642	If one or more of the backend flags are or'ed into the flags value,
485	backends will be tried (in the reverse order as listed here). If none are	643	then only these backends will be tried (in the reverse order as listed
486	specified, all backends in C<ev_recommended_backends ()> will be tried.	644	here). If none are specified, all backends in C<ev_recommended_backends
487		645	()> will be tried.
488	Example: This is the most typical usage.
489
490	if (!ev_default_loop (0))
491	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
492
493	Example: Restrict libev to the select and poll backends, and do not allow
494	environment settings to be taken into account:
495
496	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
497
498	Example: Use whatever libev has to offer, but make sure that kqueue is
499	used if available (warning, breaks stuff, best use only with your own
500	private event loop and only if you know the OS supports your types of
501	fds):
502
503	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
504
505	=item struct ev_loop *ev_loop_new (unsigned int flags)
506
507	Similar to C<ev_default_loop>, but always creates a new event loop that is
508	always distinct from the default loop. Unlike the default loop, it cannot
509	handle signal and child watchers, and attempts to do so will be greeted by
510	undefined behaviour (or a failed assertion if assertions are enabled).
511
512	Note that this function I<is> thread-safe, and the recommended way to use
513	libev with threads is indeed to create one loop per thread, and using the
514	default loop in the "main" or "initial" thread.
515		646
516	Example: Try to create a event loop that uses epoll and nothing else.	647	Example: Try to create a event loop that uses epoll and nothing else.
517		648
518	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	649	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
519	if (!epoller)	650	if (!epoller)
520	fatal ("no epoll found here, maybe it hides under your chair");	651	fatal ("no epoll found here, maybe it hides under your chair");
521		652
		653	Example: Use whatever libev has to offer, but make sure that kqueue is
		654	used if available.
		655
		656	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_KQUEUE);
		657
522	=item ev_default_destroy ()	658	=item ev_loop_destroy (loop)
523		659
524	Destroys the default loop again (frees all memory and kernel state	660	Destroys an event loop object (frees all memory and kernel state
525	etc.). None of the active event watchers will be stopped in the normal	661	etc.). None of the active event watchers will be stopped in the normal
526	sense, so e.g. C<ev_is_active> might still return true. It is your	662	sense, so e.g. C<ev_is_active> might still return true. It is your
527	responsibility to either stop all watchers cleanly yourself I<before>	663	responsibility to either stop all watchers cleanly yourself I<before>
528	calling this function, or cope with the fact afterwards (which is usually	664	calling this function, or cope with the fact afterwards (which is usually
529	the easiest thing, you can just ignore the watchers and/or C<free ()> them	665	the easiest thing, you can just ignore the watchers and/or C<free ()> them
530	for example).	666	for example).
531		667
532	Note that certain global state, such as signal state, will not be freed by	668	Note that certain global state, such as signal state (and installed signal
533	this function, and related watchers (such as signal and child watchers)	669	handlers), will not be freed by this function, and related watchers (such
534	would need to be stopped manually.	670	as signal and child watchers) would need to be stopped manually.
535		671
536	In general it is not advisable to call this function except in the	672	This function is normally used on loop objects allocated by
537	rare occasion where you really need to free e.g. the signal handling	673	C<ev_loop_new>, but it can also be used on the default loop returned by
		674	C<ev_default_loop>, in which case it is not thread-safe.
		675
		676	Note that it is not advisable to call this function on the default loop
		677	except in the rare occasion where you really need to free its resources.
538	pipe fds. If you need dynamically allocated loops it is better to use	678	If you need dynamically allocated loops it is better to use C<ev_loop_new>
539	C<ev_loop_new> and C<ev_loop_destroy>).	679	and C<ev_loop_destroy>.
540		680
541	=item ev_loop_destroy (loop)	681	=item ev_loop_fork (loop)
542		682
543	Like C<ev_default_destroy>, but destroys an event loop created by an
544	earlier call to C<ev_loop_new>.
545
546	=item ev_default_fork ()
547
548	This function sets a flag that causes subsequent C<ev_loop> iterations	683	This function sets a flag that causes subsequent C<ev_run> iterations to
549	to reinitialise the kernel state for backends that have one. Despite the	684	reinitialise the kernel state for backends that have one. Despite the
550	name, you can call it anytime, but it makes most sense after forking, in	685	name, you can call it anytime, but it makes most sense after forking, in
551	the child process (or both child and parent, but that again makes little	686	the child process. You I<must> call it (or use C<EVFLAG_FORKCHECK>) in the
552	sense). You I<must> call it in the child before using any of the libev	687	child before resuming or calling C<ev_run>.
553	functions, and it will only take effect at the next C<ev_loop> iteration.	688
		689	Again, you I<have> to call it on I<any> loop that you want to re-use after
		690	a fork, I<even if you do not plan to use the loop in the parent>. This is
		691	because some kernel interfaces *cough* I<kqueue> *cough* do funny things
		692	during fork.
554		693
555	On the other hand, you only need to call this function in the child	694	On the other hand, you only need to call this function in the child
556	process if and only if you want to use the event library in the child. If	695	process if and only if you want to use the event loop in the child. If
557	you just fork+exec, you don't have to call it at all.	696	you just fork+exec or create a new loop in the child, you don't have to
		697	call it at all (in fact, C<epoll> is so badly broken that it makes a
		698	difference, but libev will usually detect this case on its own and do a
		699	costly reset of the backend).
558		700
559	The function itself is quite fast and it's usually not a problem to call	701	The function itself is quite fast and it's usually not a problem to call
560	it just in case after a fork. To make this easy, the function will fit in	702	it just in case after a fork.
561	quite nicely into a call to C<pthread_atfork>:
562		703
		704	Example: Automate calling C<ev_loop_fork> on the default loop when
		705	using pthreads.
		706
		707	static void
		708	post_fork_child (void)
		709	{
		710	ev_loop_fork (EV_DEFAULT);
		711	}
		712
		713	...
563	pthread_atfork (0, 0, ev_default_fork);	714	pthread_atfork (0, 0, post_fork_child);
564
565	=item ev_loop_fork (loop)
566
567	Like C<ev_default_fork>, but acts on an event loop created by
568	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
569	after fork that you want to re-use in the child, and how you do this is
570	entirely your own problem.
571		715
572	=item int ev_is_default_loop (loop)	716	=item int ev_is_default_loop (loop)
573		717
574	Returns true when the given loop is, in fact, the default loop, and false	718	Returns true when the given loop is, in fact, the default loop, and false
575	otherwise.	719	otherwise.
576		720
577	=item unsigned int ev_loop_count (loop)	721	=item unsigned int ev_iteration (loop)
578		722
579	Returns the count of loop iterations for the loop, which is identical to	723	Returns the current iteration count for the event loop, which is identical
580	the number of times libev did poll for new events. It starts at C<0> and	724	to the number of times libev did poll for new events. It starts at C<0>
581	happily wraps around with enough iterations.	725	and happily wraps around with enough iterations.
582		726
583	This value can sometimes be useful as a generation counter of sorts (it	727	This value can sometimes be useful as a generation counter of sorts (it
584	"ticks" the number of loop iterations), as it roughly corresponds with	728	"ticks" the number of loop iterations), as it roughly corresponds with
585	C<ev_prepare> and C<ev_check> calls.	729	C<ev_prepare> and C<ev_check> calls - and is incremented between the
		730	prepare and check phases.
		731
		732	=item unsigned int ev_depth (loop)
		733
		734	Returns the number of times C<ev_run> was entered minus the number of
		735	times C<ev_run> was exited normally, in other words, the recursion depth.
		736
		737	Outside C<ev_run>, this number is zero. In a callback, this number is
		738	C<1>, unless C<ev_run> was invoked recursively (or from another thread),
		739	in which case it is higher.
		740
		741	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread,
		742	throwing an exception etc.), doesn't count as "exit" - consider this
		743	as a hint to avoid such ungentleman-like behaviour unless it's really
		744	convenient, in which case it is fully supported.
586		745
587	=item unsigned int ev_backend (loop)	746	=item unsigned int ev_backend (loop)
588		747
589	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	748	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
590	use.	749	use.
…		…
599		758
600	=item ev_now_update (loop)	759	=item ev_now_update (loop)
601		760
602	Establishes the current time by querying the kernel, updating the time	761	Establishes the current time by querying the kernel, updating the time
603	returned by C<ev_now ()> in the progress. This is a costly operation and	762	returned by C<ev_now ()> in the progress. This is a costly operation and
604	is usually done automatically within C<ev_loop ()>.	763	is usually done automatically within C<ev_run ()>.
605		764
606	This function is rarely useful, but when some event callback runs for a	765	This function is rarely useful, but when some event callback runs for a
607	very long time without entering the event loop, updating libev's idea of	766	very long time without entering the event loop, updating libev's idea of
608	the current time is a good idea.	767	the current time is a good idea.
609		768
610	See also "The special problem of time updates" in the C<ev_timer> section.	769	See also L</The special problem of time updates> in the C<ev_timer> section.
611		770
		771	=item ev_suspend (loop)
		772
		773	=item ev_resume (loop)
		774
		775	These two functions suspend and resume an event loop, for use when the
		776	loop is not used for a while and timeouts should not be processed.
		777
		778	A typical use case would be an interactive program such as a game: When
		779	the user presses C<^Z> to suspend the game and resumes it an hour later it
		780	would be best to handle timeouts as if no time had actually passed while
		781	the program was suspended. This can be achieved by calling C<ev_suspend>
		782	in your C<SIGTSTP> handler, sending yourself a C<SIGSTOP> and calling
		783	C<ev_resume> directly afterwards to resume timer processing.
		784
		785	Effectively, all C<ev_timer> watchers will be delayed by the time spend
		786	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers
		787	will be rescheduled (that is, they will lose any events that would have
		788	occurred while suspended).
		789
		790	After calling C<ev_suspend> you B<must not> call I<any> function on the
		791	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>
		792	without a previous call to C<ev_suspend>.
		793
		794	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the
		795	event loop time (see C<ev_now_update>).
		796
612	=item ev_loop (loop, int flags)	797	=item bool ev_run (loop, int flags)
613		798
614	Finally, this is it, the event handler. This function usually is called	799	Finally, this is it, the event handler. This function usually is called
615	after you initialised all your watchers and you want to start handling	800	after you have initialised all your watchers and you want to start
616	events.	801	handling events. It will ask the operating system for any new events, call
		802	the watcher callbacks, and then repeat the whole process indefinitely: This
		803	is why event loops are called I<loops>.
617		804
618	If the flags argument is specified as C<0>, it will not return until	805	If the flags argument is specified as C<0>, it will keep handling events
619	either no event watchers are active anymore or C<ev_unloop> was called.	806	until either no event watchers are active anymore or C<ev_break> was
		807	called.
620		808
		809	The return value is false if there are no more active watchers (which
		810	usually means "all jobs done" or "deadlock"), and true in all other cases
		811	(which usually means " you should call C<ev_run> again").
		812
621	Please note that an explicit C<ev_unloop> is usually better than	813	Please note that an explicit C<ev_break> is usually better than
622	relying on all watchers to be stopped when deciding when a program has	814	relying on all watchers to be stopped when deciding when a program has
623	finished (especially in interactive programs), but having a program	815	finished (especially in interactive programs), but having a program
624	that automatically loops as long as it has to and no longer by virtue	816	that automatically loops as long as it has to and no longer by virtue
625	of relying on its watchers stopping correctly, that is truly a thing of	817	of relying on its watchers stopping correctly, that is truly a thing of
626	beauty.	818	beauty.
627		819
		820	This function is I<mostly> exception-safe - you can break out of a
		821	C<ev_run> call by calling C<longjmp> in a callback, throwing a C++
		822	exception and so on. This does not decrement the C<ev_depth> value, nor
		823	will it clear any outstanding C<EVBREAK_ONE> breaks.
		824
628	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle	825	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle
629	those events and any already outstanding ones, but will not block your	826	those events and any already outstanding ones, but will not wait and
630	process in case there are no events and will return after one iteration of	827	block your process in case there are no events and will return after one
631	the loop.	828	iteration of the loop. This is sometimes useful to poll and handle new
		829	events while doing lengthy calculations, to keep the program responsive.
632		830
633	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if	831	A flags value of C<EVRUN_ONCE> will look for new events (waiting if
634	necessary) and will handle those and any already outstanding ones. It	832	necessary) and will handle those and any already outstanding ones. It
635	will block your process until at least one new event arrives (which could	833	will block your process until at least one new event arrives (which could
636	be an event internal to libev itself, so there is no guarentee that a	834	be an event internal to libev itself, so there is no guarantee that a
637	user-registered callback will be called), and will return after one	835	user-registered callback will be called), and will return after one
638	iteration of the loop.	836	iteration of the loop.
639		837
640	This is useful if you are waiting for some external event in conjunction	838	This is useful if you are waiting for some external event in conjunction
641	with something not expressible using other libev watchers (i.e. "roll your	839	with something not expressible using other libev watchers (i.e. "roll your
642	own C<ev_loop>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is	840	own C<ev_run>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is
643	usually a better approach for this kind of thing.	841	usually a better approach for this kind of thing.
644		842
645	Here are the gory details of what C<ev_loop> does:	843	Here are the gory details of what C<ev_run> does (this is for your
		844	understanding, not a guarantee that things will work exactly like this in
		845	future versions):
646		846
		847	- Increment loop depth.
		848	- Reset the ev_break status.
647	- Before the first iteration, call any pending watchers.	849	- Before the first iteration, call any pending watchers.
		850	LOOP:
648	* If EVFLAG_FORKCHECK was used, check for a fork.	851	- If EVFLAG_FORKCHECK was used, check for a fork.
649	- If a fork was detected (by any means), queue and call all fork watchers.	852	- If a fork was detected (by any means), queue and call all fork watchers.
650	- Queue and call all prepare watchers.	853	- Queue and call all prepare watchers.
		854	- If ev_break was called, goto FINISH.
651	- If we have been forked, detach and recreate the kernel state	855	- If we have been forked, detach and recreate the kernel state
652	as to not disturb the other process.	856	as to not disturb the other process.
653	- Update the kernel state with all outstanding changes.	857	- Update the kernel state with all outstanding changes.
654	- Update the "event loop time" (ev_now ()).	858	- Update the "event loop time" (ev_now ()).
655	- Calculate for how long to sleep or block, if at all	859	- Calculate for how long to sleep or block, if at all
656	(active idle watchers, EVLOOP_NONBLOCK or not having	860	(active idle watchers, EVRUN_NOWAIT or not having
657	any active watchers at all will result in not sleeping).	861	any active watchers at all will result in not sleeping).
658	- Sleep if the I/O and timer collect interval say so.	862	- Sleep if the I/O and timer collect interval say so.
		863	- Increment loop iteration counter.
659	- Block the process, waiting for any events.	864	- Block the process, waiting for any events.
660	- Queue all outstanding I/O (fd) events.	865	- Queue all outstanding I/O (fd) events.
661	- Update the "event loop time" (ev_now ()), and do time jump adjustments.	866	- Update the "event loop time" (ev_now ()), and do time jump adjustments.
662	- Queue all expired timers.	867	- Queue all expired timers.
663	- Queue all expired periodics.	868	- Queue all expired periodics.
664	- Unless any events are pending now, queue all idle watchers.	869	- Queue all idle watchers with priority higher than that of pending events.
665	- Queue all check watchers.	870	- Queue all check watchers.
666	- Call all queued watchers in reverse order (i.e. check watchers first).	871	- Call all queued watchers in reverse order (i.e. check watchers first).
667	Signals and child watchers are implemented as I/O watchers, and will	872	Signals and child watchers are implemented as I/O watchers, and will
668	be handled here by queueing them when their watcher gets executed.	873	be handled here by queueing them when their watcher gets executed.
669	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	874	- If ev_break has been called, or EVRUN_ONCE or EVRUN_NOWAIT
670	were used, or there are no active watchers, return, otherwise	875	were used, or there are no active watchers, goto FINISH, otherwise
671	continue with step *.	876	continue with step LOOP.
		877	FINISH:
		878	- Reset the ev_break status iff it was EVBREAK_ONE.
		879	- Decrement the loop depth.
		880	- Return.
672		881
673	Example: Queue some jobs and then loop until no events are outstanding	882	Example: Queue some jobs and then loop until no events are outstanding
674	anymore.	883	anymore.
675		884
676	... queue jobs here, make sure they register event watchers as long	885	... queue jobs here, make sure they register event watchers as long
677	... as they still have work to do (even an idle watcher will do..)	886	... as they still have work to do (even an idle watcher will do..)
678	ev_loop (my_loop, 0);	887	ev_run (my_loop, 0);
679	... jobs done or somebody called unloop. yeah!	888	... jobs done or somebody called break. yeah!
680		889
681	=item ev_unloop (loop, how)	890	=item ev_break (loop, how)
682		891
683	Can be used to make a call to C<ev_loop> return early (but only after it	892	Can be used to make a call to C<ev_run> return early (but only after it
684	has processed all outstanding events). The C<how> argument must be either	893	has processed all outstanding events). The C<how> argument must be either
685	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	894	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or
686	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	895	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.
687		896
688	This "unloop state" will be cleared when entering C<ev_loop> again.	897	This "break state" will be cleared on the next call to C<ev_run>.
		898
		899	It is safe to call C<ev_break> from outside any C<ev_run> calls, too, in
		900	which case it will have no effect.
689		901
690	=item ev_ref (loop)	902	=item ev_ref (loop)
691		903
692	=item ev_unref (loop)	904	=item ev_unref (loop)
693		905
694	Ref/unref can be used to add or remove a reference count on the event	906	Ref/unref can be used to add or remove a reference count on the event
695	loop: Every watcher keeps one reference, and as long as the reference	907	loop: Every watcher keeps one reference, and as long as the reference
696	count is nonzero, C<ev_loop> will not return on its own.	908	count is nonzero, C<ev_run> will not return on its own.
697		909
698	If you have a watcher you never unregister that should not keep C<ev_loop>	910	This is useful when you have a watcher that you never intend to
699	from returning, call ev_unref() after starting, and ev_ref() before	911	unregister, but that nevertheless should not keep C<ev_run> from
		912	returning. In such a case, call C<ev_unref> after starting, and C<ev_ref>
700	stopping it.	913	before stopping it.
701		914
702	As an example, libev itself uses this for its internal signal pipe: It is	915	As an example, libev itself uses this for its internal signal pipe: It
703	not visible to the libev user and should not keep C<ev_loop> from exiting	916	is not visible to the libev user and should not keep C<ev_run> from
704	if no event watchers registered by it are active. It is also an excellent	917	exiting if no event watchers registered by it are active. It is also an
705	way to do this for generic recurring timers or from within third-party	918	excellent way to do this for generic recurring timers or from within
706	libraries. Just remember to I<unref after start> and I<ref before stop>	919	third-party libraries. Just remember to I<unref after start> and I<ref
707	(but only if the watcher wasn't active before, or was active before,	920	before stop> (but only if the watcher wasn't active before, or was active
708	respectively).	921	before, respectively. Note also that libev might stop watchers itself
		922	(e.g. non-repeating timers) in which case you have to C<ev_ref>
		923	in the callback).
709		924
710	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	925	Example: Create a signal watcher, but keep it from keeping C<ev_run>
711	running when nothing else is active.	926	running when nothing else is active.
712		927
713	struct ev_signal exitsig;	928	ev_signal exitsig;
714	ev_signal_init (&exitsig, sig_cb, SIGINT);	929	ev_signal_init (&exitsig, sig_cb, SIGINT);
715	ev_signal_start (loop, &exitsig);	930	ev_signal_start (loop, &exitsig);
716	evf_unref (loop);	931	ev_unref (loop);
717		932
718	Example: For some weird reason, unregister the above signal handler again.	933	Example: For some weird reason, unregister the above signal handler again.
719		934
720	ev_ref (loop);	935	ev_ref (loop);
721	ev_signal_stop (loop, &exitsig);	936	ev_signal_stop (loop, &exitsig);
…		…
741	overhead for the actual polling but can deliver many events at once.	956	overhead for the actual polling but can deliver many events at once.
742		957
743	By setting a higher I<io collect interval> you allow libev to spend more	958	By setting a higher I<io collect interval> you allow libev to spend more
744	time collecting I/O events, so you can handle more events per iteration,	959	time collecting I/O events, so you can handle more events per iteration,
745	at the cost of increasing latency. Timeouts (both C<ev_periodic> and	960	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
746	C<ev_timer>) will be not affected. Setting this to a non-null value will	961	C<ev_timer>) will not be affected. Setting this to a non-null value will
747	introduce an additional C<ev_sleep ()> call into most loop iterations.	962	introduce an additional C<ev_sleep ()> call into most loop iterations. The
		963	sleep time ensures that libev will not poll for I/O events more often then
		964	once per this interval, on average (as long as the host time resolution is
		965	good enough).
748		966
749	Likewise, by setting a higher I<timeout collect interval> you allow libev	967	Likewise, by setting a higher I<timeout collect interval> you allow libev
750	to spend more time collecting timeouts, at the expense of increased	968	to spend more time collecting timeouts, at the expense of increased
751	latency/jitter/inexactness (the watcher callback will be called	969	latency/jitter/inexactness (the watcher callback will be called
752	later). C<ev_io> watchers will not be affected. Setting this to a non-null	970	later). C<ev_io> watchers will not be affected. Setting this to a non-null
…		…
754		972
755	Many (busy) programs can usually benefit by setting the I/O collect	973	Many (busy) programs can usually benefit by setting the I/O collect
756	interval to a value near C<0.1> or so, which is often enough for	974	interval to a value near C<0.1> or so, which is often enough for
757	interactive servers (of course not for games), likewise for timeouts. It	975	interactive servers (of course not for games), likewise for timeouts. It
758	usually doesn't make much sense to set it to a lower value than C<0.01>,	976	usually doesn't make much sense to set it to a lower value than C<0.01>,
759	as this approaches the timing granularity of most systems.	977	as this approaches the timing granularity of most systems. Note that if
		978	you do transactions with the outside world and you can't increase the
		979	parallelity, then this setting will limit your transaction rate (if you
		980	need to poll once per transaction and the I/O collect interval is 0.01,
		981	then you can't do more than 100 transactions per second).
760		982
761	Setting the I<timeout collect interval> can improve the opportunity for	983	Setting the I<timeout collect interval> can improve the opportunity for
762	saving power, as the program will "bundle" timer callback invocations that	984	saving power, as the program will "bundle" timer callback invocations that
763	are "near" in time together, by delaying some, thus reducing the number of	985	are "near" in time together, by delaying some, thus reducing the number of
764	times the process sleeps and wakes up again. Another useful technique to	986	times the process sleeps and wakes up again. Another useful technique to
765	reduce iterations/wake-ups is to use C<ev_periodic> watchers and make sure	987	reduce iterations/wake-ups is to use C<ev_periodic> watchers and make sure
766	they fire on, say, one-second boundaries only.	988	they fire on, say, one-second boundaries only.
767		989
		990	Example: we only need 0.1s timeout granularity, and we wish not to poll
		991	more often than 100 times per second:
		992
		993	ev_set_timeout_collect_interval (EV_DEFAULT_UC_ 0.1);
		994	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);
		995
		996	=item ev_invoke_pending (loop)
		997
		998	This call will simply invoke all pending watchers while resetting their
		999	pending state. Normally, C<ev_run> does this automatically when required,
		1000	but when overriding the invoke callback this call comes handy. This
		1001	function can be invoked from a watcher - this can be useful for example
		1002	when you want to do some lengthy calculation and want to pass further
		1003	event handling to another thread (you still have to make sure only one
		1004	thread executes within C<ev_invoke_pending> or C<ev_run> of course).
		1005
		1006	=item int ev_pending_count (loop)
		1007
		1008	Returns the number of pending watchers - zero indicates that no watchers
		1009	are pending.
		1010
		1011	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))
		1012
		1013	This overrides the invoke pending functionality of the loop: Instead of
		1014	invoking all pending watchers when there are any, C<ev_run> will call
		1015	this callback instead. This is useful, for example, when you want to
		1016	invoke the actual watchers inside another context (another thread etc.).
		1017
		1018	If you want to reset the callback, use C<ev_invoke_pending> as new
		1019	callback.
		1020
		1021	=item ev_set_loop_release_cb (loop, void (*release)(EV_P) throw (), void (*acquire)(EV_P) throw ())
		1022
		1023	Sometimes you want to share the same loop between multiple threads. This
		1024	can be done relatively simply by putting mutex_lock/unlock calls around
		1025	each call to a libev function.
		1026
		1027	However, C<ev_run> can run an indefinite time, so it is not feasible
		1028	to wait for it to return. One way around this is to wake up the event
		1029	loop via C<ev_break> and C<ev_async_send>, another way is to set these
		1030	I<release> and I<acquire> callbacks on the loop.
		1031
		1032	When set, then C<release> will be called just before the thread is
		1033	suspended waiting for new events, and C<acquire> is called just
		1034	afterwards.
		1035
		1036	Ideally, C<release> will just call your mutex_unlock function, and
		1037	C<acquire> will just call the mutex_lock function again.
		1038
		1039	While event loop modifications are allowed between invocations of
		1040	C<release> and C<acquire> (that's their only purpose after all), no
		1041	modifications done will affect the event loop, i.e. adding watchers will
		1042	have no effect on the set of file descriptors being watched, or the time
		1043	waited. Use an C<ev_async> watcher to wake up C<ev_run> when you want it
		1044	to take note of any changes you made.
		1045
		1046	In theory, threads executing C<ev_run> will be async-cancel safe between
		1047	invocations of C<release> and C<acquire>.
		1048
		1049	See also the locking example in the C<THREADS> section later in this
		1050	document.
		1051
		1052	=item ev_set_userdata (loop, void *data)
		1053
		1054	=item void *ev_userdata (loop)
		1055
		1056	Set and retrieve a single C<void *> associated with a loop. When
		1057	C<ev_set_userdata> has never been called, then C<ev_userdata> returns
		1058	C<0>.
		1059
		1060	These two functions can be used to associate arbitrary data with a loop,
		1061	and are intended solely for the C<invoke_pending_cb>, C<release> and
		1062	C<acquire> callbacks described above, but of course can be (ab-)used for
		1063	any other purpose as well.
		1064
768	=item ev_loop_verify (loop)	1065	=item ev_verify (loop)
769		1066
770	This function only does something when C<EV_VERIFY> support has been	1067	This function only does something when C<EV_VERIFY> support has been
771	compiled in. which is the default for non-minimal builds. It tries to go	1068	compiled in, which is the default for non-minimal builds. It tries to go
772	through all internal structures and checks them for validity. If anything	1069	through all internal structures and checks them for validity. If anything
773	is found to be inconsistent, it will print an error message to standard	1070	is found to be inconsistent, it will print an error message to standard
774	error and call C<abort ()>.	1071	error and call C<abort ()>.
775		1072
776	This can be used to catch bugs inside libev itself: under normal	1073	This can be used to catch bugs inside libev itself: under normal
…		…
780	=back	1077	=back
781		1078
782		1079
783	=head1 ANATOMY OF A WATCHER	1080	=head1 ANATOMY OF A WATCHER
784		1081
		1082	In the following description, uppercase C<TYPE> in names stands for the
		1083	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer
		1084	watchers and C<ev_io_start> for I/O watchers.
		1085
785	A watcher is a structure that you create and register to record your	1086	A watcher is an opaque structure that you allocate and register to record
786	interest in some event. For instance, if you want to wait for STDIN to	1087	your interest in some event. To make a concrete example, imagine you want
787	become readable, you would create an C<ev_io> watcher for that:	1088	to wait for STDIN to become readable, you would create an C<ev_io> watcher
		1089	for that:
788		1090
789	static void my_cb (struct ev_loop *loop, struct ev_io *w, int revents)	1091	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)
790	{	1092	{
791	ev_io_stop (w);	1093	ev_io_stop (w);
792	ev_unloop (loop, EVUNLOOP_ALL);	1094	ev_break (loop, EVBREAK_ALL);
793	}	1095	}
794		1096
795	struct ev_loop *loop = ev_default_loop (0);	1097	struct ev_loop *loop = ev_default_loop (0);
		1098
796	struct ev_io stdin_watcher;	1099	ev_io stdin_watcher;
		1100
797	ev_init (&stdin_watcher, my_cb);	1101	ev_init (&stdin_watcher, my_cb);
798	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);	1102	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
799	ev_io_start (loop, &stdin_watcher);	1103	ev_io_start (loop, &stdin_watcher);
		1104
800	ev_loop (loop, 0);	1105	ev_run (loop, 0);
801		1106
802	As you can see, you are responsible for allocating the memory for your	1107	As you can see, you are responsible for allocating the memory for your
803	watcher structures (and it is usually a bad idea to do this on the stack,	1108	watcher structures (and it is I<usually> a bad idea to do this on the
804	although this can sometimes be quite valid).	1109	stack).
805		1110
		1111	Each watcher has an associated watcher structure (called C<struct ev_TYPE>
		1112	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).
		1113
806	Each watcher structure must be initialised by a call to C<ev_init	1114	Each watcher structure must be initialised by a call to C<ev_init (watcher
807	(watcher *, callback)>, which expects a callback to be provided. This	1115	*, callback)>, which expects a callback to be provided. This callback is
808	callback gets invoked each time the event occurs (or, in the case of I/O	1116	invoked each time the event occurs (or, in the case of I/O watchers, each
809	watchers, each time the event loop detects that the file descriptor given	1117	time the event loop detects that the file descriptor given is readable
810	is readable and/or writable).	1118	and/or writable).
811		1119
812	Each watcher type has its own C<< ev_<type>_set (watcher *, ...) >> macro	1120	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>
813	with arguments specific to this watcher type. There is also a macro	1121	macro to configure it, with arguments specific to the watcher type. There
814	to combine initialisation and setting in one call: C<< ev_<type>_init	1122	is also a macro to combine initialisation and setting in one call: C<<
815	(watcher *, callback, ...) >>.	1123	ev_TYPE_init (watcher *, callback, ...) >>.
816		1124
817	To make the watcher actually watch out for events, you have to start it	1125	To make the watcher actually watch out for events, you have to start it
818	with a watcher-specific start function (C<< ev_<type>_start (loop, watcher	1126	with a watcher-specific start function (C<< ev_TYPE_start (loop, watcher
819	*) >>), and you can stop watching for events at any time by calling the	1127	*) >>), and you can stop watching for events at any time by calling the
820	corresponding stop function (C<< ev_<type>_stop (loop, watcher *) >>.	1128	corresponding stop function (C<< ev_TYPE_stop (loop, watcher *) >>.
821		1129
822	As long as your watcher is active (has been started but not stopped) you	1130	As long as your watcher is active (has been started but not stopped) you
823	must not touch the values stored in it. Most specifically you must never	1131	must not touch the values stored in it. Most specifically you must never
824	reinitialise it or call its C<set> macro.	1132	reinitialise it or call its C<ev_TYPE_set> macro.
825		1133
826	Each and every callback receives the event loop pointer as first, the	1134	Each and every callback receives the event loop pointer as first, the
827	registered watcher structure as second, and a bitset of received events as	1135	registered watcher structure as second, and a bitset of received events as
828	third argument.	1136	third argument.
829		1137
…		…
838	=item C<EV_WRITE>	1146	=item C<EV_WRITE>
839		1147
840	The file descriptor in the C<ev_io> watcher has become readable and/or	1148	The file descriptor in the C<ev_io> watcher has become readable and/or
841	writable.	1149	writable.
842		1150
843	=item C<EV_TIMEOUT>	1151	=item C<EV_TIMER>
844		1152
845	The C<ev_timer> watcher has timed out.	1153	The C<ev_timer> watcher has timed out.
846		1154
847	=item C<EV_PERIODIC>	1155	=item C<EV_PERIODIC>
848		1156
…		…
866		1174
867	=item C<EV_PREPARE>	1175	=item C<EV_PREPARE>
868		1176
869	=item C<EV_CHECK>	1177	=item C<EV_CHECK>
870		1178
871	All C<ev_prepare> watchers are invoked just I<before> C<ev_loop> starts	1179	All C<ev_prepare> watchers are invoked just I<before> C<ev_run> starts to
872	to gather new events, and all C<ev_check> watchers are invoked just after	1180	gather new events, and all C<ev_check> watchers are queued (not invoked)
873	C<ev_loop> has gathered them, but before it invokes any callbacks for any	1181	just after C<ev_run> has gathered them, but before it queues any callbacks
		1182	for any received events. That means C<ev_prepare> watchers are the last
		1183	watchers invoked before the event loop sleeps or polls for new events, and
		1184	C<ev_check> watchers will be invoked before any other watchers of the same
		1185	or lower priority within an event loop iteration.
		1186
874	received events. Callbacks of both watcher types can start and stop as	1187	Callbacks of both watcher types can start and stop as many watchers as
875	many watchers as they want, and all of them will be taken into account	1188	they want, and all of them will be taken into account (for example, a
876	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	1189	C<ev_prepare> watcher might start an idle watcher to keep C<ev_run> from
877	C<ev_loop> from blocking).	1190	blocking).
878		1191
879	=item C<EV_EMBED>	1192	=item C<EV_EMBED>
880		1193
881	The embedded event loop specified in the C<ev_embed> watcher needs attention.	1194	The embedded event loop specified in the C<ev_embed> watcher needs attention.
882		1195
883	=item C<EV_FORK>	1196	=item C<EV_FORK>
884		1197
885	The event loop has been resumed in the child process after fork (see	1198	The event loop has been resumed in the child process after fork (see
886	C<ev_fork>).	1199	C<ev_fork>).
887		1200
		1201	=item C<EV_CLEANUP>
		1202
		1203	The event loop is about to be destroyed (see C<ev_cleanup>).
		1204
888	=item C<EV_ASYNC>	1205	=item C<EV_ASYNC>
889		1206
890	The given async watcher has been asynchronously notified (see C<ev_async>).	1207	The given async watcher has been asynchronously notified (see C<ev_async>).
		1208
		1209	=item C<EV_CUSTOM>
		1210
		1211	Not ever sent (or otherwise used) by libev itself, but can be freely used
		1212	by libev users to signal watchers (e.g. via C<ev_feed_event>).
891		1213
892	=item C<EV_ERROR>	1214	=item C<EV_ERROR>
893		1215
894	An unspecified error has occurred, the watcher has been stopped. This might	1216	An unspecified error has occurred, the watcher has been stopped. This might
895	happen because the watcher could not be properly started because libev	1217	happen because the watcher could not be properly started because libev
896	ran out of memory, a file descriptor was found to be closed or any other	1218	ran out of memory, a file descriptor was found to be closed or any other
		1219	problem. Libev considers these application bugs.
		1220
897	problem. You best act on it by reporting the problem and somehow coping	1221	You best act on it by reporting the problem and somehow coping with the
898	with the watcher being stopped.	1222	watcher being stopped. Note that well-written programs should not receive
		1223	an error ever, so when your watcher receives it, this usually indicates a
		1224	bug in your program.
899		1225
900	Libev will usually signal a few "dummy" events together with an error, for	1226	Libev will usually signal a few "dummy" events together with an error, for
901	example it might indicate that a fd is readable or writable, and if your	1227	example it might indicate that a fd is readable or writable, and if your
902	callbacks is well-written it can just attempt the operation and cope with	1228	callbacks is well-written it can just attempt the operation and cope with
903	the error from read() or write(). This will not work in multi-threaded	1229	the error from read() or write(). This will not work in multi-threaded
…		…
906		1232
907	=back	1233	=back
908		1234
909	=head2 GENERIC WATCHER FUNCTIONS	1235	=head2 GENERIC WATCHER FUNCTIONS
910		1236
911	In the following description, C<TYPE> stands for the watcher type,
912	e.g. C<timer> for C<ev_timer> watchers and C<io> for C<ev_io> watchers.
913
914	=over 4	1237	=over 4
915		1238
916	=item C<ev_init> (ev_TYPE *watcher, callback)	1239	=item C<ev_init> (ev_TYPE *watcher, callback)
917		1240
918	This macro initialises the generic portion of a watcher. The contents	1241	This macro initialises the generic portion of a watcher. The contents
…		…
923	which rolls both calls into one.	1246	which rolls both calls into one.
924		1247
925	You can reinitialise a watcher at any time as long as it has been stopped	1248	You can reinitialise a watcher at any time as long as it has been stopped
926	(or never started) and there are no pending events outstanding.	1249	(or never started) and there are no pending events outstanding.
927		1250
928	The callback is always of type C<void (*)(ev_loop *loop, ev_TYPE *watcher,	1251	The callback is always of type C<void (*)(struct ev_loop *loop, ev_TYPE *watcher,
929	int revents)>.	1252	int revents)>.
930		1253
931	Example: Initialise an C<ev_io> watcher in two steps.	1254	Example: Initialise an C<ev_io> watcher in two steps.
932		1255
933	ev_io w;	1256	ev_io w;
934	ev_init (&w, my_cb);	1257	ev_init (&w, my_cb);
935	ev_io_set (&w, STDIN_FILENO, EV_READ);	1258	ev_io_set (&w, STDIN_FILENO, EV_READ);
936		1259
937	=item C<ev_TYPE_set> (ev_TYPE *, [args])	1260	=item C<ev_TYPE_set> (ev_TYPE *watcher, [args])
938		1261
939	This macro initialises the type-specific parts of a watcher. You need to	1262	This macro initialises the type-specific parts of a watcher. You need to
940	call C<ev_init> at least once before you call this macro, but you can	1263	call C<ev_init> at least once before you call this macro, but you can
941	call C<ev_TYPE_set> any number of times. You must not, however, call this	1264	call C<ev_TYPE_set> any number of times. You must not, however, call this
942	macro on a watcher that is active (it can be pending, however, which is a	1265	macro on a watcher that is active (it can be pending, however, which is a
…		…
955		1278
956	Example: Initialise and set an C<ev_io> watcher in one step.	1279	Example: Initialise and set an C<ev_io> watcher in one step.
957		1280
958	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);	1281	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);
959		1282
960	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)	1283	=item C<ev_TYPE_start> (loop, ev_TYPE *watcher)
961		1284
962	Starts (activates) the given watcher. Only active watchers will receive	1285	Starts (activates) the given watcher. Only active watchers will receive
963	events. If the watcher is already active nothing will happen.	1286	events. If the watcher is already active nothing will happen.
964		1287
965	Example: Start the C<ev_io> watcher that is being abused as example in this	1288	Example: Start the C<ev_io> watcher that is being abused as example in this
966	whole section.	1289	whole section.
967		1290
968	ev_io_start (EV_DEFAULT_UC, &w);	1291	ev_io_start (EV_DEFAULT_UC, &w);
969		1292
970	=item C<ev_TYPE_stop> (loop *, ev_TYPE *watcher)	1293	=item C<ev_TYPE_stop> (loop, ev_TYPE *watcher)
971		1294
972	Stops the given watcher again (if active) and clears the pending	1295	Stops the given watcher if active, and clears the pending status (whether
		1296	the watcher was active or not).
		1297
973	status. It is possible that stopped watchers are pending (for example,	1298	It is possible that stopped watchers are pending - for example,
974	non-repeating timers are being stopped when they become pending), but	1299	non-repeating timers are being stopped when they become pending - but
975	C<ev_TYPE_stop> ensures that the watcher is neither active nor pending. If	1300	calling C<ev_TYPE_stop> ensures that the watcher is neither active nor
976	you want to free or reuse the memory used by the watcher it is therefore a	1301	pending. If you want to free or reuse the memory used by the watcher it is
977	good idea to always call its C<ev_TYPE_stop> function.	1302	therefore a good idea to always call its C<ev_TYPE_stop> function.
978		1303
979	=item bool ev_is_active (ev_TYPE *watcher)	1304	=item bool ev_is_active (ev_TYPE *watcher)
980		1305
981	Returns a true value iff the watcher is active (i.e. it has been started	1306	Returns a true value iff the watcher is active (i.e. it has been started
982	and not yet been stopped). As long as a watcher is active you must not modify	1307	and not yet been stopped). As long as a watcher is active you must not modify
…		…
993		1318
994	=item callback ev_cb (ev_TYPE *watcher)	1319	=item callback ev_cb (ev_TYPE *watcher)
995		1320
996	Returns the callback currently set on the watcher.	1321	Returns the callback currently set on the watcher.
997		1322
998	=item ev_cb_set (ev_TYPE *watcher, callback)	1323	=item ev_set_cb (ev_TYPE *watcher, callback)
999		1324
1000	Change the callback. You can change the callback at virtually any time	1325	Change the callback. You can change the callback at virtually any time
1001	(modulo threads).	1326	(modulo threads).
1002		1327
1003	=item ev_set_priority (ev_TYPE *watcher, priority)	1328	=item ev_set_priority (ev_TYPE *watcher, int priority)
1004		1329
1005	=item int ev_priority (ev_TYPE *watcher)	1330	=item int ev_priority (ev_TYPE *watcher)
1006		1331
1007	Set and query the priority of the watcher. The priority is a small	1332	Set and query the priority of the watcher. The priority is a small
1008	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>	1333	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
1009	(default: C<-2>). Pending watchers with higher priority will be invoked	1334	(default: C<-2>). Pending watchers with higher priority will be invoked
1010	before watchers with lower priority, but priority will not keep watchers	1335	before watchers with lower priority, but priority will not keep watchers
1011	from being executed (except for C<ev_idle> watchers).	1336	from being executed (except for C<ev_idle> watchers).
1012		1337
1013	This means that priorities are I<only> used for ordering callback
1014	invocation after new events have been received. This is useful, for
1015	example, to reduce latency after idling, or more often, to bind two
1016	watchers on the same event and make sure one is called first.
1017
1018	If you need to suppress invocation when higher priority events are pending	1338	If you need to suppress invocation when higher priority events are pending
1019	you need to look at C<ev_idle> watchers, which provide this functionality.	1339	you need to look at C<ev_idle> watchers, which provide this functionality.
1020		1340
1021	You I<must not> change the priority of a watcher as long as it is active or	1341	You I<must not> change the priority of a watcher as long as it is active or
1022	pending.	1342	pending.
1023		1343
		1344	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is
		1345	fine, as long as you do not mind that the priority value you query might
		1346	or might not have been clamped to the valid range.
		1347
1024	The default priority used by watchers when no priority has been set is	1348	The default priority used by watchers when no priority has been set is
1025	always C<0>, which is supposed to not be too high and not be too low :).	1349	always C<0>, which is supposed to not be too high and not be too low :).
1026		1350
1027	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is	1351	See L</WATCHER PRIORITY MODELS>, below, for a more thorough treatment of
1028	fine, as long as you do not mind that the priority value you query might	1352	priorities.
1029	or might not have been adjusted to be within valid range.
1030		1353
1031	=item ev_invoke (loop, ev_TYPE *watcher, int revents)	1354	=item ev_invoke (loop, ev_TYPE *watcher, int revents)
1032		1355
1033	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither	1356	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
1034	C<loop> nor C<revents> need to be valid as long as the watcher callback	1357	C<loop> nor C<revents> need to be valid as long as the watcher callback
…		…
1042	watcher isn't pending it does nothing and returns C<0>.	1365	watcher isn't pending it does nothing and returns C<0>.
1043		1366
1044	Sometimes it can be useful to "poll" a watcher instead of waiting for its	1367	Sometimes it can be useful to "poll" a watcher instead of waiting for its
1045	callback to be invoked, which can be accomplished with this function.	1368	callback to be invoked, which can be accomplished with this function.
1046		1369
		1370	=item ev_feed_event (loop, ev_TYPE *watcher, int revents)
		1371
		1372	Feeds the given event set into the event loop, as if the specified event
		1373	had happened for the specified watcher (which must be a pointer to an
		1374	initialised but not necessarily started event watcher). Obviously you must
		1375	not free the watcher as long as it has pending events.
		1376
		1377	Stopping the watcher, letting libev invoke it, or calling
		1378	C<ev_clear_pending> will clear the pending event, even if the watcher was
		1379	not started in the first place.
		1380
		1381	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
		1382	functions that do not need a watcher.
		1383
1047	=back	1384	=back
1048		1385
		1386	See also the L</ASSOCIATING CUSTOM DATA WITH A WATCHER> and L</BUILDING YOUR
		1387	OWN COMPOSITE WATCHERS> idioms.
1049		1388
1050	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	1389	=head2 WATCHER STATES
1051		1390
1052	Each watcher has, by default, a member C<void *data> that you can change	1391	There are various watcher states mentioned throughout this manual -
1053	and read at any time: libev will completely ignore it. This can be used	1392	active, pending and so on. In this section these states and the rules to
1054	to associate arbitrary data with your watcher. If you need more data and	1393	transition between them will be described in more detail - and while these
1055	don't want to allocate memory and store a pointer to it in that data	1394	rules might look complicated, they usually do "the right thing".
1056	member, you can also "subclass" the watcher type and provide your own
1057	data:
1058		1395
1059	struct my_io	1396	=over 4
		1397
		1398	=item initialised
		1399
		1400	Before a watcher can be registered with the event loop it has to be
		1401	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
		1402	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
		1403
		1404	In this state it is simply some block of memory that is suitable for
		1405	use in an event loop. It can be moved around, freed, reused etc. at
		1406	will - as long as you either keep the memory contents intact, or call
		1407	C<ev_TYPE_init> again.
		1408
		1409	=item started/running/active
		1410
		1411	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
		1412	property of the event loop, and is actively waiting for events. While in
		1413	this state it cannot be accessed (except in a few documented ways), moved,
		1414	freed or anything else - the only legal thing is to keep a pointer to it,
		1415	and call libev functions on it that are documented to work on active watchers.
		1416
		1417	=item pending
		1418
		1419	If a watcher is active and libev determines that an event it is interested
		1420	in has occurred (such as a timer expiring), it will become pending. It will
		1421	stay in this pending state until either it is stopped or its callback is
		1422	about to be invoked, so it is not normally pending inside the watcher
		1423	callback.
		1424
		1425	The watcher might or might not be active while it is pending (for example,
		1426	an expired non-repeating timer can be pending but no longer active). If it
		1427	is stopped, it can be freely accessed (e.g. by calling C<ev_TYPE_set>),
		1428	but it is still property of the event loop at this time, so cannot be
		1429	moved, freed or reused. And if it is active the rules described in the
		1430	previous item still apply.
		1431
		1432	It is also possible to feed an event on a watcher that is not active (e.g.
		1433	via C<ev_feed_event>), in which case it becomes pending without being
		1434	active.
		1435
		1436	=item stopped
		1437
		1438	A watcher can be stopped implicitly by libev (in which case it might still
		1439	be pending), or explicitly by calling its C<ev_TYPE_stop> function. The
		1440	latter will clear any pending state the watcher might be in, regardless
		1441	of whether it was active or not, so stopping a watcher explicitly before
		1442	freeing it is often a good idea.
		1443
		1444	While stopped (and not pending) the watcher is essentially in the
		1445	initialised state, that is, it can be reused, moved, modified in any way
		1446	you wish (but when you trash the memory block, you need to C<ev_TYPE_init>
		1447	it again).
		1448
		1449	=back
		1450
		1451	=head2 WATCHER PRIORITY MODELS
		1452
		1453	Many event loops support I<watcher priorities>, which are usually small
		1454	integers that influence the ordering of event callback invocation
		1455	between watchers in some way, all else being equal.
		1456
		1457	In libev, Watcher priorities can be set using C<ev_set_priority>. See its
		1458	description for the more technical details such as the actual priority
		1459	range.
		1460
		1461	There are two common ways how these these priorities are being interpreted
		1462	by event loops:
		1463
		1464	In the more common lock-out model, higher priorities "lock out" invocation
		1465	of lower priority watchers, which means as long as higher priority
		1466	watchers receive events, lower priority watchers are not being invoked.
		1467
		1468	The less common only-for-ordering model uses priorities solely to order
		1469	callback invocation within a single event loop iteration: Higher priority
		1470	watchers are invoked before lower priority ones, but they all get invoked
		1471	before polling for new events.
		1472
		1473	Libev uses the second (only-for-ordering) model for all its watchers
		1474	except for idle watchers (which use the lock-out model).
		1475
		1476	The rationale behind this is that implementing the lock-out model for
		1477	watchers is not well supported by most kernel interfaces, and most event
		1478	libraries will just poll for the same events again and again as long as
		1479	their callbacks have not been executed, which is very inefficient in the
		1480	common case of one high-priority watcher locking out a mass of lower
		1481	priority ones.
		1482
		1483	Static (ordering) priorities are most useful when you have two or more
		1484	watchers handling the same resource: a typical usage example is having an
		1485	C<ev_io> watcher to receive data, and an associated C<ev_timer> to handle
		1486	timeouts. Under load, data might be received while the program handles
		1487	other jobs, but since timers normally get invoked first, the timeout
		1488	handler will be executed before checking for data. In that case, giving
		1489	the timer a lower priority than the I/O watcher ensures that I/O will be
		1490	handled first even under adverse conditions (which is usually, but not
		1491	always, what you want).
		1492
		1493	Since idle watchers use the "lock-out" model, meaning that idle watchers
		1494	will only be executed when no same or higher priority watchers have
		1495	received events, they can be used to implement the "lock-out" model when
		1496	required.
		1497
		1498	For example, to emulate how many other event libraries handle priorities,
		1499	you can associate an C<ev_idle> watcher to each such watcher, and in
		1500	the normal watcher callback, you just start the idle watcher. The real
		1501	processing is done in the idle watcher callback. This causes libev to
		1502	continuously poll and process kernel event data for the watcher, but when
		1503	the lock-out case is known to be rare (which in turn is rare :), this is
		1504	workable.
		1505
		1506	Usually, however, the lock-out model implemented that way will perform
		1507	miserably under the type of load it was designed to handle. In that case,
		1508	it might be preferable to stop the real watcher before starting the
		1509	idle watcher, so the kernel will not have to process the event in case
		1510	the actual processing will be delayed for considerable time.
		1511
		1512	Here is an example of an I/O watcher that should run at a strictly lower
		1513	priority than the default, and which should only process data when no
		1514	other events are pending:
		1515
		1516	ev_idle idle; // actual processing watcher
		1517	ev_io io; // actual event watcher
		1518
		1519	static void
		1520	io_cb (EV_P_ ev_io *w, int revents)
1060	{	1521	{
1061	struct ev_io io;	1522	// stop the I/O watcher, we received the event, but
1062	int otherfd;	1523	// are not yet ready to handle it.
1063	void *somedata;	1524	ev_io_stop (EV_A_ w);
1064	struct whatever *mostinteresting;	1525
		1526	// start the idle watcher to handle the actual event.
		1527	// it will not be executed as long as other watchers
		1528	// with the default priority are receiving events.
		1529	ev_idle_start (EV_A_ &idle);
1065	};	1530	}
1066		1531
1067	...	1532	static void
1068	struct my_io w;	1533	idle_cb (EV_P_ ev_idle *w, int revents)
1069	ev_io_init (&w.io, my_cb, fd, EV_READ);
1070
1071	And since your callback will be called with a pointer to the watcher, you
1072	can cast it back to your own type:
1073
1074	static void my_cb (struct ev_loop *loop, struct ev_io *w_, int revents)
1075	{	1534	{
1076	struct my_io *w = (struct my_io *)w_;	1535	// actual processing
1077	...	1536	read (STDIN_FILENO, ...);
		1537
		1538	// have to start the I/O watcher again, as
		1539	// we have handled the event
		1540	ev_io_start (EV_P_ &io);
1078	}	1541	}
1079		1542
1080	More interesting and less C-conformant ways of casting your callback type	1543	// initialisation
1081	instead have been omitted.	1544	ev_idle_init (&idle, idle_cb);
		1545	ev_io_init (&io, io_cb, STDIN_FILENO, EV_READ);
		1546	ev_io_start (EV_DEFAULT_ &io);
1082		1547
1083	Another common scenario is to use some data structure with multiple	1548	In the "real" world, it might also be beneficial to start a timer, so that
1084	embedded watchers:	1549	low-priority connections can not be locked out forever under load. This
1085		1550	enables your program to keep a lower latency for important connections
1086	struct my_biggy	1551	during short periods of high load, while not completely locking out less
1087	{	1552	important ones.
1088	int some_data;
1089	ev_timer t1;
1090	ev_timer t2;
1091	}
1092
1093	In this case getting the pointer to C<my_biggy> is a bit more
1094	complicated: Either you store the address of your C<my_biggy> struct
1095	in the C<data> member of the watcher (for woozies), or you need to use
1096	some pointer arithmetic using C<offsetof> inside your watchers (for real
1097	programmers):
1098
1099	#include <stddef.h>
1100
1101	static void
1102	t1_cb (EV_P_ struct ev_timer *w, int revents)
1103	{
1104	struct my_biggy big = (struct my_biggy *
1105	(((char *)w) - offsetof (struct my_biggy, t1));
1106	}
1107
1108	static void
1109	t2_cb (EV_P_ struct ev_timer *w, int revents)
1110	{
1111	struct my_biggy big = (struct my_biggy *
1112	(((char *)w) - offsetof (struct my_biggy, t2));
1113	}
1114		1553
1115		1554
1116	=head1 WATCHER TYPES	1555	=head1 WATCHER TYPES
1117		1556
1118	This section describes each watcher in detail, but will not repeat	1557	This section describes each watcher in detail, but will not repeat
…		…
1142	In general you can register as many read and/or write event watchers per	1581	In general you can register as many read and/or write event watchers per
1143	fd as you want (as long as you don't confuse yourself). Setting all file	1582	fd as you want (as long as you don't confuse yourself). Setting all file
1144	descriptors to non-blocking mode is also usually a good idea (but not	1583	descriptors to non-blocking mode is also usually a good idea (but not
1145	required if you know what you are doing).	1584	required if you know what you are doing).
1146		1585
1147	If you cannot use non-blocking mode, then force the use of a
1148	known-to-be-good backend (at the time of this writing, this includes only
1149	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>).
1150
1151	Another thing you have to watch out for is that it is quite easy to	1586	Another thing you have to watch out for is that it is quite easy to
1152	receive "spurious" readiness notifications, that is your callback might	1587	receive "spurious" readiness notifications, that is, your callback might
1153	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1588	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
1154	because there is no data. Not only are some backends known to create a	1589	because there is no data. It is very easy to get into this situation even
1155	lot of those (for example Solaris ports), it is very easy to get into	1590	with a relatively standard program structure. Thus it is best to always
1156	this situation even with a relatively standard program structure. Thus	1591	use non-blocking I/O: An extra C<read>(2) returning C<EAGAIN> is far
1157	it is best to always use non-blocking I/O: An extra C<read>(2) returning
1158	C<EAGAIN> is far preferable to a program hanging until some data arrives.	1592	preferable to a program hanging until some data arrives.
1159		1593
1160	If you cannot run the fd in non-blocking mode (for example you should	1594	If you cannot run the fd in non-blocking mode (for example you should
1161	not play around with an Xlib connection), then you have to separately	1595	not play around with an Xlib connection), then you have to separately
1162	re-test whether a file descriptor is really ready with a known-to-be good	1596	re-test whether a file descriptor is really ready with a known-to-be good
1163	interface such as poll (fortunately in our Xlib example, Xlib already	1597	interface such as poll (fortunately in the case of Xlib, it already does
1164	does this on its own, so its quite safe to use). Some people additionally	1598	this on its own, so its quite safe to use). Some people additionally
1165	use C<SIGALRM> and an interval timer, just to be sure you won't block	1599	use C<SIGALRM> and an interval timer, just to be sure you won't block
1166	indefinitely.	1600	indefinitely.
1167		1601
1168	But really, best use non-blocking mode.	1602	But really, best use non-blocking mode.
1169		1603
…		…
1197		1631
1198	There is no workaround possible except not registering events	1632	There is no workaround possible except not registering events
1199	for potentially C<dup ()>'ed file descriptors, or to resort to	1633	for potentially C<dup ()>'ed file descriptors, or to resort to
1200	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.	1634	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1201		1635
		1636	=head3 The special problem of files
		1637
		1638	Many people try to use C<select> (or libev) on file descriptors
		1639	representing files, and expect it to become ready when their program
		1640	doesn't block on disk accesses (which can take a long time on their own).
		1641
		1642	However, this cannot ever work in the "expected" way - you get a readiness
		1643	notification as soon as the kernel knows whether and how much data is
		1644	there, and in the case of open files, that's always the case, so you
		1645	always get a readiness notification instantly, and your read (or possibly
		1646	write) will still block on the disk I/O.
		1647
		1648	Another way to view it is that in the case of sockets, pipes, character
		1649	devices and so on, there is another party (the sender) that delivers data
		1650	on its own, but in the case of files, there is no such thing: the disk
		1651	will not send data on its own, simply because it doesn't know what you
		1652	wish to read - you would first have to request some data.
		1653
		1654	Since files are typically not-so-well supported by advanced notification
		1655	mechanism, libev tries hard to emulate POSIX behaviour with respect
		1656	to files, even though you should not use it. The reason for this is
		1657	convenience: sometimes you want to watch STDIN or STDOUT, which is
		1658	usually a tty, often a pipe, but also sometimes files or special devices
		1659	(for example, C<epoll> on Linux works with F</dev/random> but not with
		1660	F</dev/urandom>), and even though the file might better be served with
		1661	asynchronous I/O instead of with non-blocking I/O, it is still useful when
		1662	it "just works" instead of freezing.
		1663
		1664	So avoid file descriptors pointing to files when you know it (e.g. use
		1665	libeio), but use them when it is convenient, e.g. for STDIN/STDOUT, or
		1666	when you rarely read from a file instead of from a socket, and want to
		1667	reuse the same code path.
		1668
1202	=head3 The special problem of fork	1669	=head3 The special problem of fork
1203		1670
1204	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit	1671	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit
1205	useless behaviour. Libev fully supports fork, but needs to be told about	1672	useless behaviour. Libev fully supports fork, but needs to be told about
1206	it in the child.	1673	it in the child if you want to continue to use it in the child.
1207		1674
1208	To support fork in your programs, you either have to call	1675	To support fork in your child processes, you have to call C<ev_loop_fork
1209	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,	1676	()> after a fork in the child, enable C<EVFLAG_FORKCHECK>, or resort to
1210	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or	1677	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1211	C<EVBACKEND_POLL>.
1212		1678
1213	=head3 The special problem of SIGPIPE	1679	=head3 The special problem of SIGPIPE
1214		1680
1215	While not really specific to libev, it is easy to forget about C<SIGPIPE>:	1681	While not really specific to libev, it is easy to forget about C<SIGPIPE>:
1216	when writing to a pipe whose other end has been closed, your program gets	1682	when writing to a pipe whose other end has been closed, your program gets
…		…
1219		1685
1220	So when you encounter spurious, unexplained daemon exits, make sure you	1686	So when you encounter spurious, unexplained daemon exits, make sure you
1221	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon	1687	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
1222	somewhere, as that would have given you a big clue).	1688	somewhere, as that would have given you a big clue).
1223		1689
		1690	=head3 The special problem of accept()ing when you can't
		1691
		1692	Many implementations of the POSIX C<accept> function (for example,
		1693	found in post-2004 Linux) have the peculiar behaviour of not removing a
		1694	connection from the pending queue in all error cases.
		1695
		1696	For example, larger servers often run out of file descriptors (because
		1697	of resource limits), causing C<accept> to fail with C<ENFILE> but not
		1698	rejecting the connection, leading to libev signalling readiness on
		1699	the next iteration again (the connection still exists after all), and
		1700	typically causing the program to loop at 100% CPU usage.
		1701
		1702	Unfortunately, the set of errors that cause this issue differs between
		1703	operating systems, there is usually little the app can do to remedy the
		1704	situation, and no known thread-safe method of removing the connection to
		1705	cope with overload is known (to me).
		1706
		1707	One of the easiest ways to handle this situation is to just ignore it
		1708	- when the program encounters an overload, it will just loop until the
		1709	situation is over. While this is a form of busy waiting, no OS offers an
		1710	event-based way to handle this situation, so it's the best one can do.
		1711
		1712	A better way to handle the situation is to log any errors other than
		1713	C<EAGAIN> and C<EWOULDBLOCK>, making sure not to flood the log with such
		1714	messages, and continue as usual, which at least gives the user an idea of
		1715	what could be wrong ("raise the ulimit!"). For extra points one could stop
		1716	the C<ev_io> watcher on the listening fd "for a while", which reduces CPU
		1717	usage.
		1718
		1719	If your program is single-threaded, then you could also keep a dummy file
		1720	descriptor for overload situations (e.g. by opening F</dev/null>), and
		1721	when you run into C<ENFILE> or C<EMFILE>, close it, run C<accept>,
		1722	close that fd, and create a new dummy fd. This will gracefully refuse
		1723	clients under typical overload conditions.
		1724
		1725	The last way to handle it is to simply log the error and C<exit>, as
		1726	is often done with C<malloc> failures, but this results in an easy
		1727	opportunity for a DoS attack.
1224		1728
1225	=head3 Watcher-Specific Functions	1729	=head3 Watcher-Specific Functions
1226		1730
1227	=over 4	1731	=over 4
1228		1732
…		…
1249	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well	1753	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well
1250	readable, but only once. Since it is likely line-buffered, you could	1754	readable, but only once. Since it is likely line-buffered, you could
1251	attempt to read a whole line in the callback.	1755	attempt to read a whole line in the callback.
1252		1756
1253	static void	1757	static void
1254	stdin_readable_cb (struct ev_loop *loop, struct ev_io *w, int revents)	1758	stdin_readable_cb (struct ev_loop *loop, ev_io *w, int revents)
1255	{	1759	{
1256	ev_io_stop (loop, w);	1760	ev_io_stop (loop, w);
1257	.. read from stdin here (or from w->fd) and handle any I/O errors	1761	.. read from stdin here (or from w->fd) and handle any I/O errors
1258	}	1762	}
1259		1763
1260	...	1764	...
1261	struct ev_loop *loop = ev_default_init (0);	1765	struct ev_loop *loop = ev_default_init (0);
1262	struct ev_io stdin_readable;	1766	ev_io stdin_readable;
1263	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);	1767	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
1264	ev_io_start (loop, &stdin_readable);	1768	ev_io_start (loop, &stdin_readable);
1265	ev_loop (loop, 0);	1769	ev_run (loop, 0);
1266		1770
1267		1771
1268	=head2 C<ev_timer> - relative and optionally repeating timeouts	1772	=head2 C<ev_timer> - relative and optionally repeating timeouts
1269		1773
1270	Timer watchers are simple relative timers that generate an event after a	1774	Timer watchers are simple relative timers that generate an event after a
…		…
1275	year, it will still time out after (roughly) one hour. "Roughly" because	1779	year, it will still time out after (roughly) one hour. "Roughly" because
1276	detecting time jumps is hard, and some inaccuracies are unavoidable (the	1780	detecting time jumps is hard, and some inaccuracies are unavoidable (the
1277	monotonic clock option helps a lot here).	1781	monotonic clock option helps a lot here).
1278		1782
1279	The callback is guaranteed to be invoked only I<after> its timeout has	1783	The callback is guaranteed to be invoked only I<after> its timeout has
1280	passed, but if multiple timers become ready during the same loop iteration	1784	passed (not I<at>, so on systems with very low-resolution clocks this
1281	then order of execution is undefined.	1785	might introduce a small delay, see "the special problem of being too
		1786	early", below). If multiple timers become ready during the same loop
		1787	iteration then the ones with earlier time-out values are invoked before
		1788	ones of the same priority with later time-out values (but this is no
		1789	longer true when a callback calls C<ev_run> recursively).
		1790
		1791	=head3 Be smart about timeouts
		1792
		1793	Many real-world problems involve some kind of timeout, usually for error
		1794	recovery. A typical example is an HTTP request - if the other side hangs,
		1795	you want to raise some error after a while.
		1796
		1797	What follows are some ways to handle this problem, from obvious and
		1798	inefficient to smart and efficient.
		1799
		1800	In the following, a 60 second activity timeout is assumed - a timeout that
		1801	gets reset to 60 seconds each time there is activity (e.g. each time some
		1802	data or other life sign was received).
		1803
		1804	=over 4
		1805
		1806	=item 1. Use a timer and stop, reinitialise and start it on activity.
		1807
		1808	This is the most obvious, but not the most simple way: In the beginning,
		1809	start the watcher:
		1810
		1811	ev_timer_init (timer, callback, 60., 0.);
		1812	ev_timer_start (loop, timer);
		1813
		1814	Then, each time there is some activity, C<ev_timer_stop> it, initialise it
		1815	and start it again:
		1816
		1817	ev_timer_stop (loop, timer);
		1818	ev_timer_set (timer, 60., 0.);
		1819	ev_timer_start (loop, timer);
		1820
		1821	This is relatively simple to implement, but means that each time there is
		1822	some activity, libev will first have to remove the timer from its internal
		1823	data structure and then add it again. Libev tries to be fast, but it's
		1824	still not a constant-time operation.
		1825
		1826	=item 2. Use a timer and re-start it with C<ev_timer_again> inactivity.
		1827
		1828	This is the easiest way, and involves using C<ev_timer_again> instead of
		1829	C<ev_timer_start>.
		1830
		1831	To implement this, configure an C<ev_timer> with a C<repeat> value
		1832	of C<60> and then call C<ev_timer_again> at start and each time you
		1833	successfully read or write some data. If you go into an idle state where
		1834	you do not expect data to travel on the socket, you can C<ev_timer_stop>
		1835	the timer, and C<ev_timer_again> will automatically restart it if need be.
		1836
		1837	That means you can ignore both the C<ev_timer_start> function and the
		1838	C<after> argument to C<ev_timer_set>, and only ever use the C<repeat>
		1839	member and C<ev_timer_again>.
		1840
		1841	At start:
		1842
		1843	ev_init (timer, callback);
		1844	timer->repeat = 60.;
		1845	ev_timer_again (loop, timer);
		1846
		1847	Each time there is some activity:
		1848
		1849	ev_timer_again (loop, timer);
		1850
		1851	It is even possible to change the time-out on the fly, regardless of
		1852	whether the watcher is active or not:
		1853
		1854	timer->repeat = 30.;
		1855	ev_timer_again (loop, timer);
		1856
		1857	This is slightly more efficient then stopping/starting the timer each time
		1858	you want to modify its timeout value, as libev does not have to completely
		1859	remove and re-insert the timer from/into its internal data structure.
		1860
		1861	It is, however, even simpler than the "obvious" way to do it.
		1862
		1863	=item 3. Let the timer time out, but then re-arm it as required.
		1864
		1865	This method is more tricky, but usually most efficient: Most timeouts are
		1866	relatively long compared to the intervals between other activity - in
		1867	our example, within 60 seconds, there are usually many I/O events with
		1868	associated activity resets.
		1869
		1870	In this case, it would be more efficient to leave the C<ev_timer> alone,
		1871	but remember the time of last activity, and check for a real timeout only
		1872	within the callback:
		1873
		1874	ev_tstamp timeout = 60.;
		1875	ev_tstamp last_activity; // time of last activity
		1876	ev_timer timer;
		1877
		1878	static void
		1879	callback (EV_P_ ev_timer *w, int revents)
		1880	{
		1881	// calculate when the timeout would happen
		1882	ev_tstamp after = last_activity - ev_now (EV_A) + timeout;
		1883
		1884	// if negative, it means we the timeout already occurred
		1885	if (after < 0.)
		1886	{
		1887	// timeout occurred, take action
		1888	}
		1889	else
		1890	{
		1891	// callback was invoked, but there was some recent
		1892	// activity. simply restart the timer to time out
		1893	// after "after" seconds, which is the earliest time
		1894	// the timeout can occur.
		1895	ev_timer_set (w, after, 0.);
		1896	ev_timer_start (EV_A_ w);
		1897	}
		1898	}
		1899
		1900	To summarise the callback: first calculate in how many seconds the
		1901	timeout will occur (by calculating the absolute time when it would occur,
		1902	C<last_activity + timeout>, and subtracting the current time, C<ev_now
		1903	(EV_A)> from that).
		1904
		1905	If this value is negative, then we are already past the timeout, i.e. we
		1906	timed out, and need to do whatever is needed in this case.
		1907
		1908	Otherwise, we now the earliest time at which the timeout would trigger,
		1909	and simply start the timer with this timeout value.
		1910
		1911	In other words, each time the callback is invoked it will check whether
		1912	the timeout occurred. If not, it will simply reschedule itself to check
		1913	again at the earliest time it could time out. Rinse. Repeat.
		1914
		1915	This scheme causes more callback invocations (about one every 60 seconds
		1916	minus half the average time between activity), but virtually no calls to
		1917	libev to change the timeout.
		1918
		1919	To start the machinery, simply initialise the watcher and set
		1920	C<last_activity> to the current time (meaning there was some activity just
		1921	now), then call the callback, which will "do the right thing" and start
		1922	the timer:
		1923
		1924	last_activity = ev_now (EV_A);
		1925	ev_init (&timer, callback);
		1926	callback (EV_A_ &timer, 0);
		1927
		1928	When there is some activity, simply store the current time in
		1929	C<last_activity>, no libev calls at all:
		1930
		1931	if (activity detected)
		1932	last_activity = ev_now (EV_A);
		1933
		1934	When your timeout value changes, then the timeout can be changed by simply
		1935	providing a new value, stopping the timer and calling the callback, which
		1936	will again do the right thing (for example, time out immediately :).
		1937
		1938	timeout = new_value;
		1939	ev_timer_stop (EV_A_ &timer);
		1940	callback (EV_A_ &timer, 0);
		1941
		1942	This technique is slightly more complex, but in most cases where the
		1943	time-out is unlikely to be triggered, much more efficient.
		1944
		1945	=item 4. Wee, just use a double-linked list for your timeouts.
		1946
		1947	If there is not one request, but many thousands (millions...), all
		1948	employing some kind of timeout with the same timeout value, then one can
		1949	do even better:
		1950
		1951	When starting the timeout, calculate the timeout value and put the timeout
		1952	at the I<end> of the list.
		1953
		1954	Then use an C<ev_timer> to fire when the timeout at the I<beginning> of
		1955	the list is expected to fire (for example, using the technique #3).
		1956
		1957	When there is some activity, remove the timer from the list, recalculate
		1958	the timeout, append it to the end of the list again, and make sure to
		1959	update the C<ev_timer> if it was taken from the beginning of the list.
		1960
		1961	This way, one can manage an unlimited number of timeouts in O(1) time for
		1962	starting, stopping and updating the timers, at the expense of a major
		1963	complication, and having to use a constant timeout. The constant timeout
		1964	ensures that the list stays sorted.
		1965
		1966	=back
		1967
		1968	So which method the best?
		1969
		1970	Method #2 is a simple no-brain-required solution that is adequate in most
		1971	situations. Method #3 requires a bit more thinking, but handles many cases
		1972	better, and isn't very complicated either. In most case, choosing either
		1973	one is fine, with #3 being better in typical situations.
		1974
		1975	Method #1 is almost always a bad idea, and buys you nothing. Method #4 is
		1976	rather complicated, but extremely efficient, something that really pays
		1977	off after the first million or so of active timers, i.e. it's usually
		1978	overkill :)
		1979
		1980	=head3 The special problem of being too early
		1981
		1982	If you ask a timer to call your callback after three seconds, then
		1983	you expect it to be invoked after three seconds - but of course, this
		1984	cannot be guaranteed to infinite precision. Less obviously, it cannot be
		1985	guaranteed to any precision by libev - imagine somebody suspending the
		1986	process with a STOP signal for a few hours for example.
		1987
		1988	So, libev tries to invoke your callback as soon as possible I<after> the
		1989	delay has occurred, but cannot guarantee this.
		1990
		1991	A less obvious failure mode is calling your callback too early: many event
		1992	loops compare timestamps with a "elapsed delay >= requested delay", but
		1993	this can cause your callback to be invoked much earlier than you would
		1994	expect.
		1995
		1996	To see why, imagine a system with a clock that only offers full second
		1997	resolution (think windows if you can't come up with a broken enough OS
		1998	yourself). If you schedule a one-second timer at the time 500.9, then the
		1999	event loop will schedule your timeout to elapse at a system time of 500
		2000	(500.9 truncated to the resolution) + 1, or 501.
		2001
		2002	If an event library looks at the timeout 0.1s later, it will see "501 >=
		2003	501" and invoke the callback 0.1s after it was started, even though a
		2004	one-second delay was requested - this is being "too early", despite best
		2005	intentions.
		2006
		2007	This is the reason why libev will never invoke the callback if the elapsed
		2008	delay equals the requested delay, but only when the elapsed delay is
		2009	larger than the requested delay. In the example above, libev would only invoke
		2010	the callback at system time 502, or 1.1s after the timer was started.
		2011
		2012	So, while libev cannot guarantee that your callback will be invoked
		2013	exactly when requested, it I<can> and I<does> guarantee that the requested
		2014	delay has actually elapsed, or in other words, it always errs on the "too
		2015	late" side of things.
1282		2016
1283	=head3 The special problem of time updates	2017	=head3 The special problem of time updates
1284		2018
1285	Establishing the current time is a costly operation (it usually takes at	2019	Establishing the current time is a costly operation (it usually takes
1286	least two system calls): EV therefore updates its idea of the current	2020	at least one system call): EV therefore updates its idea of the current
1287	time only before and after C<ev_loop> collects new events, which causes a	2021	time only before and after C<ev_run> collects new events, which causes a
1288	growing difference between C<ev_now ()> and C<ev_time ()> when handling	2022	growing difference between C<ev_now ()> and C<ev_time ()> when handling
1289	lots of events in one iteration.	2023	lots of events in one iteration.
1290		2024
1291	The relative timeouts are calculated relative to the C<ev_now ()>	2025	The relative timeouts are calculated relative to the C<ev_now ()>
1292	time. This is usually the right thing as this timestamp refers to the time	2026	time. This is usually the right thing as this timestamp refers to the time
…		…
1298		2032
1299	If the event loop is suspended for a long time, you can also force an	2033	If the event loop is suspended for a long time, you can also force an
1300	update of the time returned by C<ev_now ()> by calling C<ev_now_update	2034	update of the time returned by C<ev_now ()> by calling C<ev_now_update
1301	()>.	2035	()>.
1302		2036
		2037	=head3 The special problem of unsynchronised clocks
		2038
		2039	Modern systems have a variety of clocks - libev itself uses the normal
		2040	"wall clock" clock and, if available, the monotonic clock (to avoid time
		2041	jumps).
		2042
		2043	Neither of these clocks is synchronised with each other or any other clock
		2044	on the system, so C<ev_time ()> might return a considerably different time
		2045	than C<gettimeofday ()> or C<time ()>. On a GNU/Linux system, for example,
		2046	a call to C<gettimeofday> might return a second count that is one higher
		2047	than a directly following call to C<time>.
		2048
		2049	The moral of this is to only compare libev-related timestamps with
		2050	C<ev_time ()> and C<ev_now ()>, at least if you want better precision than
		2051	a second or so.
		2052
		2053	One more problem arises due to this lack of synchronisation: if libev uses
		2054	the system monotonic clock and you compare timestamps from C<ev_time>
		2055	or C<ev_now> from when you started your timer and when your callback is
		2056	invoked, you will find that sometimes the callback is a bit "early".
		2057
		2058	This is because C<ev_timer>s work in real time, not wall clock time, so
		2059	libev makes sure your callback is not invoked before the delay happened,
		2060	I<measured according to the real time>, not the system clock.
		2061
		2062	If your timeouts are based on a physical timescale (e.g. "time out this
		2063	connection after 100 seconds") then this shouldn't bother you as it is
		2064	exactly the right behaviour.
		2065
		2066	If you want to compare wall clock/system timestamps to your timers, then
		2067	you need to use C<ev_periodic>s, as these are based on the wall clock
		2068	time, where your comparisons will always generate correct results.
		2069
		2070	=head3 The special problems of suspended animation
		2071
		2072	When you leave the server world it is quite customary to hit machines that
		2073	can suspend/hibernate - what happens to the clocks during such a suspend?
		2074
		2075	Some quick tests made with a Linux 2.6.28 indicate that a suspend freezes
		2076	all processes, while the clocks (C<times>, C<CLOCK_MONOTONIC>) continue
		2077	to run until the system is suspended, but they will not advance while the
		2078	system is suspended. That means, on resume, it will be as if the program
		2079	was frozen for a few seconds, but the suspend time will not be counted
		2080	towards C<ev_timer> when a monotonic clock source is used. The real time
		2081	clock advanced as expected, but if it is used as sole clocksource, then a
		2082	long suspend would be detected as a time jump by libev, and timers would
		2083	be adjusted accordingly.
		2084
		2085	I would not be surprised to see different behaviour in different between
		2086	operating systems, OS versions or even different hardware.
		2087
		2088	The other form of suspend (job control, or sending a SIGSTOP) will see a
		2089	time jump in the monotonic clocks and the realtime clock. If the program
		2090	is suspended for a very long time, and monotonic clock sources are in use,
		2091	then you can expect C<ev_timer>s to expire as the full suspension time
		2092	will be counted towards the timers. When no monotonic clock source is in
		2093	use, then libev will again assume a timejump and adjust accordingly.
		2094
		2095	It might be beneficial for this latter case to call C<ev_suspend>
		2096	and C<ev_resume> in code that handles C<SIGTSTP>, to at least get
		2097	deterministic behaviour in this case (you can do nothing against
		2098	C<SIGSTOP>).
		2099
1303	=head3 Watcher-Specific Functions and Data Members	2100	=head3 Watcher-Specific Functions and Data Members
1304		2101
1305	=over 4	2102	=over 4
1306		2103
1307	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	2104	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
…		…
1320	keep up with the timer (because it takes longer than those 10 seconds to	2117	keep up with the timer (because it takes longer than those 10 seconds to
1321	do stuff) the timer will not fire more than once per event loop iteration.	2118	do stuff) the timer will not fire more than once per event loop iteration.
1322		2119
1323	=item ev_timer_again (loop, ev_timer *)	2120	=item ev_timer_again (loop, ev_timer *)
1324		2121
1325	This will act as if the timer timed out and restart it again if it is	2122	This will act as if the timer timed out, and restarts it again if it is
1326	repeating. The exact semantics are:	2123	repeating. It basically works like calling C<ev_timer_stop>, updating the
		2124	timeout to the C<repeat> value and calling C<ev_timer_start>.
1327		2125
		2126	The exact semantics are as in the following rules, all of which will be
		2127	applied to the watcher:
		2128
		2129	=over 4
		2130
1328	If the timer is pending, its pending status is cleared.	2131	=item If the timer is pending, the pending status is always cleared.
1329		2132
1330	If the timer is started but non-repeating, stop it (as if it timed out).	2133	=item If the timer is started but non-repeating, stop it (as if it timed
		2134	out, without invoking it).
1331		2135
1332	If the timer is repeating, either start it if necessary (with the	2136	=item If the timer is repeating, make the C<repeat> value the new timeout
1333	C<repeat> value), or reset the running timer to the C<repeat> value.	2137	and start the timer, if necessary.
1334		2138
1335	This sounds a bit complicated, but here is a useful and typical	2139	=back
1336	example: Imagine you have a TCP connection and you want a so-called idle
1337	timeout, that is, you want to be called when there have been, say, 60
1338	seconds of inactivity on the socket. The easiest way to do this is to
1339	configure an C<ev_timer> with a C<repeat> value of C<60> and then call
1340	C<ev_timer_again> each time you successfully read or write some data. If
1341	you go into an idle state where you do not expect data to travel on the
1342	socket, you can C<ev_timer_stop> the timer, and C<ev_timer_again> will
1343	automatically restart it if need be.
1344		2140
1345	That means you can ignore the C<after> value and C<ev_timer_start>	2141	This sounds a bit complicated, see L</Be smart about timeouts>, above, for a
1346	altogether and only ever use the C<repeat> value and C<ev_timer_again>:	2142	usage example.
1347		2143
1348	ev_timer_init (timer, callback, 0., 5.);	2144	=item ev_tstamp ev_timer_remaining (loop, ev_timer *)
1349	ev_timer_again (loop, timer);
1350	...
1351	timer->again = 17.;
1352	ev_timer_again (loop, timer);
1353	...
1354	timer->again = 10.;
1355	ev_timer_again (loop, timer);
1356		2145
1357	This is more slightly efficient then stopping/starting the timer each time	2146	Returns the remaining time until a timer fires. If the timer is active,
1358	you want to modify its timeout value.	2147	then this time is relative to the current event loop time, otherwise it's
		2148	the timeout value currently configured.
1359		2149
1360	Note, however, that it is often even more efficient to remember the	2150	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns
1361	time of the last activity and let the timer time-out naturally. In the	2151	C<5>. When the timer is started and one second passes, C<ev_timer_remaining>
1362	callback, you then check whether the time-out is real, or, if there was	2152	will return C<4>. When the timer expires and is restarted, it will return
1363	some activity, you reschedule the watcher to time-out in "last_activity +	2153	roughly C<7> (likely slightly less as callback invocation takes some time,
1364	timeout - ev_now ()" seconds.	2154	too), and so on.
1365		2155
1366	=item ev_tstamp repeat [read-write]	2156	=item ev_tstamp repeat [read-write]
1367		2157
1368	The current C<repeat> value. Will be used each time the watcher times out	2158	The current C<repeat> value. Will be used each time the watcher times out
1369	or C<ev_timer_again> is called, and determines the next timeout (if any),	2159	or C<ev_timer_again> is called, and determines the next timeout (if any),
…		…
1374	=head3 Examples	2164	=head3 Examples
1375		2165
1376	Example: Create a timer that fires after 60 seconds.	2166	Example: Create a timer that fires after 60 seconds.
1377		2167
1378	static void	2168	static void
1379	one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)	2169	one_minute_cb (struct ev_loop *loop, ev_timer *w, int revents)
1380	{	2170	{
1381	.. one minute over, w is actually stopped right here	2171	.. one minute over, w is actually stopped right here
1382	}	2172	}
1383		2173
1384	struct ev_timer mytimer;	2174	ev_timer mytimer;
1385	ev_timer_init (&mytimer, one_minute_cb, 60., 0.);	2175	ev_timer_init (&mytimer, one_minute_cb, 60., 0.);
1386	ev_timer_start (loop, &mytimer);	2176	ev_timer_start (loop, &mytimer);
1387		2177
1388	Example: Create a timeout timer that times out after 10 seconds of	2178	Example: Create a timeout timer that times out after 10 seconds of
1389	inactivity.	2179	inactivity.
1390		2180
1391	static void	2181	static void
1392	timeout_cb (struct ev_loop *loop, struct ev_timer *w, int revents)	2182	timeout_cb (struct ev_loop *loop, ev_timer *w, int revents)
1393	{	2183	{
1394	.. ten seconds without any activity	2184	.. ten seconds without any activity
1395	}	2185	}
1396		2186
1397	struct ev_timer mytimer;	2187	ev_timer mytimer;
1398	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */	2188	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
1399	ev_timer_again (&mytimer); /* start timer */	2189	ev_timer_again (&mytimer); /* start timer */
1400	ev_loop (loop, 0);	2190	ev_run (loop, 0);
1401		2191
1402	// and in some piece of code that gets executed on any "activity":	2192	// and in some piece of code that gets executed on any "activity":
1403	// reset the timeout to start ticking again at 10 seconds	2193	// reset the timeout to start ticking again at 10 seconds
1404	ev_timer_again (&mytimer);	2194	ev_timer_again (&mytimer);
1405		2195
…		…
1407	=head2 C<ev_periodic> - to cron or not to cron?	2197	=head2 C<ev_periodic> - to cron or not to cron?
1408		2198
1409	Periodic watchers are also timers of a kind, but they are very versatile	2199	Periodic watchers are also timers of a kind, but they are very versatile
1410	(and unfortunately a bit complex).	2200	(and unfortunately a bit complex).
1411		2201
1412	Unlike C<ev_timer>'s, they are not based on real time (or relative time)	2202	Unlike C<ev_timer>, periodic watchers are not based on real time (or
1413	but on wall clock time (absolute time). You can tell a periodic watcher	2203	relative time, the physical time that passes) but on wall clock time
1414	to trigger after some specific point in time. For example, if you tell a	2204	(absolute time, the thing you can read on your calender or clock). The
1415	periodic watcher to trigger in 10 seconds (by specifying e.g. C<ev_now ()	2205	difference is that wall clock time can run faster or slower than real
1416	+ 10.>, that is, an absolute time not a delay) and then reset your system	2206	time, and time jumps are not uncommon (e.g. when you adjust your
1417	clock to January of the previous year, then it will take more than year	2207	wrist-watch).
1418	to trigger the event (unlike an C<ev_timer>, which would still trigger
1419	roughly 10 seconds later as it uses a relative timeout).
1420		2208
		2209	You can tell a periodic watcher to trigger after some specific point
		2210	in time: for example, if you tell a periodic watcher to trigger "in 10
		2211	seconds" (by specifying e.g. C<ev_now () + 10.>, that is, an absolute time
		2212	not a delay) and then reset your system clock to January of the previous
		2213	year, then it will take a year or more to trigger the event (unlike an
		2214	C<ev_timer>, which would still trigger roughly 10 seconds after starting
		2215	it, as it uses a relative timeout).
		2216
1421	C<ev_periodic>s can also be used to implement vastly more complex timers,	2217	C<ev_periodic> watchers can also be used to implement vastly more complex
1422	such as triggering an event on each "midnight, local time", or other	2218	timers, such as triggering an event on each "midnight, local time", or
1423	complicated rules.	2219	other complicated rules. This cannot be done with C<ev_timer> watchers, as
		2220	those cannot react to time jumps.
1424		2221
1425	As with timers, the callback is guaranteed to be invoked only when the	2222	As with timers, the callback is guaranteed to be invoked only when the
1426	time (C<at>) has passed, but if multiple periodic timers become ready	2223	point in time where it is supposed to trigger has passed. If multiple
1427	during the same loop iteration, then order of execution is undefined.	2224	timers become ready during the same loop iteration then the ones with
		2225	earlier time-out values are invoked before ones with later time-out values
		2226	(but this is no longer true when a callback calls C<ev_run> recursively).
1428		2227
1429	=head3 Watcher-Specific Functions and Data Members	2228	=head3 Watcher-Specific Functions and Data Members
1430		2229
1431	=over 4	2230	=over 4
1432		2231
1433	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)	2232	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp offset, ev_tstamp interval, reschedule_cb)
1434		2233
1435	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)	2234	=item ev_periodic_set (ev_periodic *, ev_tstamp offset, ev_tstamp interval, reschedule_cb)
1436		2235
1437	Lots of arguments, lets sort it out... There are basically three modes of	2236	Lots of arguments, let's sort it out... There are basically three modes of
1438	operation, and we will explain them from simplest to most complex:	2237	operation, and we will explain them from simplest to most complex:
1439		2238
1440	=over 4	2239	=over 4
1441		2240
1442	=item * absolute timer (at = time, interval = reschedule_cb = 0)	2241	=item * absolute timer (offset = absolute time, interval = 0, reschedule_cb = 0)
1443		2242
1444	In this configuration the watcher triggers an event after the wall clock	2243	In this configuration the watcher triggers an event after the wall clock
1445	time C<at> has passed. It will not repeat and will not adjust when a time	2244	time C<offset> has passed. It will not repeat and will not adjust when a
1446	jump occurs, that is, if it is to be run at January 1st 2011 then it will	2245	time jump occurs, that is, if it is to be run at January 1st 2011 then it
1447	only run when the system clock reaches or surpasses this time.	2246	will be stopped and invoked when the system clock reaches or surpasses
		2247	this point in time.
1448		2248
1449	=item * repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)	2249	=item * repeating interval timer (offset = offset within interval, interval > 0, reschedule_cb = 0)
1450		2250
1451	In this mode the watcher will always be scheduled to time out at the next	2251	In this mode the watcher will always be scheduled to time out at the next
1452	C<at + N * interval> time (for some integer N, which can also be negative)	2252	C<offset + N * interval> time (for some integer N, which can also be
1453	and then repeat, regardless of any time jumps.	2253	negative) and then repeat, regardless of any time jumps. The C<offset>
		2254	argument is merely an offset into the C<interval> periods.
1454		2255
1455	This can be used to create timers that do not drift with respect to the	2256	This can be used to create timers that do not drift with respect to the
1456	system clock, for example, here is a C<ev_periodic> that triggers each	2257	system clock, for example, here is an C<ev_periodic> that triggers each
1457	hour, on the hour:	2258	hour, on the hour (with respect to UTC):
1458		2259
1459	ev_periodic_set (&periodic, 0., 3600., 0);	2260	ev_periodic_set (&periodic, 0., 3600., 0);
1460		2261
1461	This doesn't mean there will always be 3600 seconds in between triggers,	2262	This doesn't mean there will always be 3600 seconds in between triggers,
1462	but only that the callback will be called when the system time shows a	2263	but only that the callback will be called when the system time shows a
1463	full hour (UTC), or more correctly, when the system time is evenly divisible	2264	full hour (UTC), or more correctly, when the system time is evenly divisible
1464	by 3600.	2265	by 3600.
1465		2266
1466	Another way to think about it (for the mathematically inclined) is that	2267	Another way to think about it (for the mathematically inclined) is that
1467	C<ev_periodic> will try to run the callback in this mode at the next possible	2268	C<ev_periodic> will try to run the callback in this mode at the next possible
1468	time where C<time = at (mod interval)>, regardless of any time jumps.	2269	time where C<time = offset (mod interval)>, regardless of any time jumps.
1469		2270
1470	For numerical stability it is preferable that the C<at> value is near	2271	The C<interval> I<MUST> be positive, and for numerical stability, the
1471	C<ev_now ()> (the current time), but there is no range requirement for	2272	interval value should be higher than C<1/8192> (which is around 100
1472	this value, and in fact is often specified as zero.	2273	microseconds) and C<offset> should be higher than C<0> and should have
		2274	at most a similar magnitude as the current time (say, within a factor of
		2275	ten). Typical values for offset are, in fact, C<0> or something between
		2276	C<0> and C<interval>, which is also the recommended range.
1473		2277
1474	Note also that there is an upper limit to how often a timer can fire (CPU	2278	Note also that there is an upper limit to how often a timer can fire (CPU
1475	speed for example), so if C<interval> is very small then timing stability	2279	speed for example), so if C<interval> is very small then timing stability
1476	will of course deteriorate. Libev itself tries to be exact to be about one	2280	will of course deteriorate. Libev itself tries to be exact to be about one
1477	millisecond (if the OS supports it and the machine is fast enough).	2281	millisecond (if the OS supports it and the machine is fast enough).
1478		2282
1479	=item * manual reschedule mode (at and interval ignored, reschedule_cb = callback)	2283	=item * manual reschedule mode (offset ignored, interval ignored, reschedule_cb = callback)
1480		2284
1481	In this mode the values for C<interval> and C<at> are both being	2285	In this mode the values for C<interval> and C<offset> are both being
1482	ignored. Instead, each time the periodic watcher gets scheduled, the	2286	ignored. Instead, each time the periodic watcher gets scheduled, the
1483	reschedule callback will be called with the watcher as first, and the	2287	reschedule callback will be called with the watcher as first, and the
1484	current time as second argument.	2288	current time as second argument.
1485		2289
1486	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,	2290	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher, ever,
1487	ever, or make ANY event loop modifications whatsoever>.	2291	or make ANY other event loop modifications whatsoever, unless explicitly
		2292	allowed by documentation here>.
1488		2293
1489	If you need to stop it, return C<now + 1e30> (or so, fudge fudge) and stop	2294	If you need to stop it, return C<now + 1e30> (or so, fudge fudge) and stop
1490	it afterwards (e.g. by starting an C<ev_prepare> watcher, which is the	2295	it afterwards (e.g. by starting an C<ev_prepare> watcher, which is the
1491	only event loop modification you are allowed to do).	2296	only event loop modification you are allowed to do).
1492		2297
1493	The callback prototype is C<ev_tstamp (*reschedule_cb)(struct ev_periodic	2298	The callback prototype is C<ev_tstamp (*reschedule_cb)(ev_periodic
1494	*w, ev_tstamp now)>, e.g.:	2299	*w, ev_tstamp now)>, e.g.:
1495		2300
		2301	static ev_tstamp
1496	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)	2302	my_rescheduler (ev_periodic *w, ev_tstamp now)
1497	{	2303	{
1498	return now + 60.;	2304	return now + 60.;
1499	}	2305	}
1500		2306
1501	It must return the next time to trigger, based on the passed time value	2307	It must return the next time to trigger, based on the passed time value
…		…
1521	a different time than the last time it was called (e.g. in a crond like	2327	a different time than the last time it was called (e.g. in a crond like
1522	program when the crontabs have changed).	2328	program when the crontabs have changed).
1523		2329
1524	=item ev_tstamp ev_periodic_at (ev_periodic *)	2330	=item ev_tstamp ev_periodic_at (ev_periodic *)
1525		2331
1526	When active, returns the absolute time that the watcher is supposed to	2332	When active, returns the absolute time that the watcher is supposed
1527	trigger next.	2333	to trigger next. This is not the same as the C<offset> argument to
		2334	C<ev_periodic_set>, but indeed works even in interval and manual
		2335	rescheduling modes.
1528		2336
1529	=item ev_tstamp offset [read-write]	2337	=item ev_tstamp offset [read-write]
1530		2338
1531	When repeating, this contains the offset value, otherwise this is the	2339	When repeating, this contains the offset value, otherwise this is the
1532	absolute point in time (the C<at> value passed to C<ev_periodic_set>).	2340	absolute point in time (the C<offset> value passed to C<ev_periodic_set>,
		2341	although libev might modify this value for better numerical stability).
1533		2342
1534	Can be modified any time, but changes only take effect when the periodic	2343	Can be modified any time, but changes only take effect when the periodic
1535	timer fires or C<ev_periodic_again> is being called.	2344	timer fires or C<ev_periodic_again> is being called.
1536		2345
1537	=item ev_tstamp interval [read-write]	2346	=item ev_tstamp interval [read-write]
1538		2347
1539	The current interval value. Can be modified any time, but changes only	2348	The current interval value. Can be modified any time, but changes only
1540	take effect when the periodic timer fires or C<ev_periodic_again> is being	2349	take effect when the periodic timer fires or C<ev_periodic_again> is being
1541	called.	2350	called.
1542		2351
1543	=item ev_tstamp (*reschedule_cb)(struct ev_periodic *w, ev_tstamp now) [read-write]	2352	=item ev_tstamp (*reschedule_cb)(ev_periodic *w, ev_tstamp now) [read-write]
1544		2353
1545	The current reschedule callback, or C<0>, if this functionality is	2354	The current reschedule callback, or C<0>, if this functionality is
1546	switched off. Can be changed any time, but changes only take effect when	2355	switched off. Can be changed any time, but changes only take effect when
1547	the periodic timer fires or C<ev_periodic_again> is being called.	2356	the periodic timer fires or C<ev_periodic_again> is being called.
1548		2357
…		…
1553	Example: Call a callback every hour, or, more precisely, whenever the	2362	Example: Call a callback every hour, or, more precisely, whenever the
1554	system time is divisible by 3600. The callback invocation times have	2363	system time is divisible by 3600. The callback invocation times have
1555	potentially a lot of jitter, but good long-term stability.	2364	potentially a lot of jitter, but good long-term stability.
1556		2365
1557	static void	2366	static void
1558	clock_cb (struct ev_loop *loop, struct ev_io *w, int revents)	2367	clock_cb (struct ev_loop *loop, ev_periodic *w, int revents)
1559	{	2368	{
1560	... its now a full hour (UTC, or TAI or whatever your clock follows)	2369	... its now a full hour (UTC, or TAI or whatever your clock follows)
1561	}	2370	}
1562		2371
1563	struct ev_periodic hourly_tick;	2372	ev_periodic hourly_tick;
1564	ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);	2373	ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);
1565	ev_periodic_start (loop, &hourly_tick);	2374	ev_periodic_start (loop, &hourly_tick);
1566		2375
1567	Example: The same as above, but use a reschedule callback to do it:	2376	Example: The same as above, but use a reschedule callback to do it:
1568		2377
1569	#include <math.h>	2378	#include <math.h>
1570		2379
1571	static ev_tstamp	2380	static ev_tstamp
1572	my_scheduler_cb (struct ev_periodic *w, ev_tstamp now)	2381	my_scheduler_cb (ev_periodic *w, ev_tstamp now)
1573	{	2382	{
1574	return now + (3600. - fmod (now, 3600.));	2383	return now + (3600. - fmod (now, 3600.));
1575	}	2384	}
1576		2385
1577	ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);	2386	ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);
1578		2387
1579	Example: Call a callback every hour, starting now:	2388	Example: Call a callback every hour, starting now:
1580		2389
1581	struct ev_periodic hourly_tick;	2390	ev_periodic hourly_tick;
1582	ev_periodic_init (&hourly_tick, clock_cb,	2391	ev_periodic_init (&hourly_tick, clock_cb,
1583	fmod (ev_now (loop), 3600.), 3600., 0);	2392	fmod (ev_now (loop), 3600.), 3600., 0);
1584	ev_periodic_start (loop, &hourly_tick);	2393	ev_periodic_start (loop, &hourly_tick);
1585		2394
1586		2395
1587	=head2 C<ev_signal> - signal me when a signal gets signalled!	2396	=head2 C<ev_signal> - signal me when a signal gets signalled!
1588		2397
1589	Signal watchers will trigger an event when the process receives a specific	2398	Signal watchers will trigger an event when the process receives a specific
1590	signal one or more times. Even though signals are very asynchronous, libev	2399	signal one or more times. Even though signals are very asynchronous, libev
1591	will try it's best to deliver signals synchronously, i.e. as part of the	2400	will try its best to deliver signals synchronously, i.e. as part of the
1592	normal event processing, like any other event.	2401	normal event processing, like any other event.
1593		2402
1594	If you want signals asynchronously, just use C<sigaction> as you would	2403	If you want signals to be delivered truly asynchronously, just use
1595	do without libev and forget about sharing the signal. You can even use	2404	C<sigaction> as you would do without libev and forget about sharing
1596	C<ev_async> from a signal handler to synchronously wake up an event loop.	2405	the signal. You can even use C<ev_async> from a signal handler to
		2406	synchronously wake up an event loop.
1597		2407
1598	You can configure as many watchers as you like per signal. Only when the	2408	You can configure as many watchers as you like for the same signal, but
		2409	only within the same loop, i.e. you can watch for C<SIGINT> in your
		2410	default loop and for C<SIGIO> in another loop, but you cannot watch for
		2411	C<SIGINT> in both the default loop and another loop at the same time. At
		2412	the moment, C<SIGCHLD> is permanently tied to the default loop.
		2413
1599	first watcher gets started will libev actually register a signal handler	2414	When the first watcher gets started will libev actually register something
1600	with the kernel (thus it coexists with your own signal handlers as long as	2415	with the kernel (thus it coexists with your own signal handlers as long as
1601	you don't register any with libev for the same signal). Similarly, when	2416	you don't register any with libev for the same signal).
1602	the last signal watcher for a signal is stopped, libev will reset the
1603	signal handler to SIG_DFL (regardless of what it was set to before).
1604		2417
1605	If possible and supported, libev will install its handlers with	2418	If possible and supported, libev will install its handlers with
1606	C<SA_RESTART> behaviour enabled, so system calls should not be unduly	2419	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should
1607	interrupted. If you have a problem with system calls getting interrupted by	2420	not be unduly interrupted. If you have a problem with system calls getting
1608	signals you can block all signals in an C<ev_check> watcher and unblock	2421	interrupted by signals you can block all signals in an C<ev_check> watcher
1609	them in an C<ev_prepare> watcher.	2422	and unblock them in an C<ev_prepare> watcher.
		2423
		2424	=head3 The special problem of inheritance over fork/execve/pthread_create
		2425
		2426	Both the signal mask (C<sigprocmask>) and the signal disposition
		2427	(C<sigaction>) are unspecified after starting a signal watcher (and after
		2428	stopping it again), that is, libev might or might not block the signal,
		2429	and might or might not set or restore the installed signal handler (but
		2430	see C<EVFLAG_NOSIGMASK>).
		2431
		2432	While this does not matter for the signal disposition (libev never
		2433	sets signals to C<SIG_IGN>, so handlers will be reset to C<SIG_DFL> on
		2434	C<execve>), this matters for the signal mask: many programs do not expect
		2435	certain signals to be blocked.
		2436
		2437	This means that before calling C<exec> (from the child) you should reset
		2438	the signal mask to whatever "default" you expect (all clear is a good
		2439	choice usually).
		2440
		2441	The simplest way to ensure that the signal mask is reset in the child is
		2442	to install a fork handler with C<pthread_atfork> that resets it. That will
		2443	catch fork calls done by libraries (such as the libc) as well.
		2444
		2445	In current versions of libev, the signal will not be blocked indefinitely
		2446	unless you use the C<signalfd> API (C<EV_SIGNALFD>). While this reduces
		2447	the window of opportunity for problems, it will not go away, as libev
		2448	I<has> to modify the signal mask, at least temporarily.
		2449
		2450	So I can't stress this enough: I<If you do not reset your signal mask when
		2451	you expect it to be empty, you have a race condition in your code>. This
		2452	is not a libev-specific thing, this is true for most event libraries.
		2453
		2454	=head3 The special problem of threads signal handling
		2455
		2456	POSIX threads has problematic signal handling semantics, specifically,
		2457	a lot of functionality (sigfd, sigwait etc.) only really works if all
		2458	threads in a process block signals, which is hard to achieve.
		2459
		2460	When you want to use sigwait (or mix libev signal handling with your own
		2461	for the same signals), you can tackle this problem by globally blocking
		2462	all signals before creating any threads (or creating them with a fully set
		2463	sigprocmask) and also specifying the C<EVFLAG_NOSIGMASK> when creating
		2464	loops. Then designate one thread as "signal receiver thread" which handles
		2465	these signals. You can pass on any signals that libev might be interested
		2466	in by calling C<ev_feed_signal>.
1610		2467
1611	=head3 Watcher-Specific Functions and Data Members	2468	=head3 Watcher-Specific Functions and Data Members
1612		2469
1613	=over 4	2470	=over 4
1614		2471
…		…
1628	=head3 Examples	2485	=head3 Examples
1629		2486
1630	Example: Try to exit cleanly on SIGINT.	2487	Example: Try to exit cleanly on SIGINT.
1631		2488
1632	static void	2489	static void
1633	sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)	2490	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)
1634	{	2491	{
1635	ev_unloop (loop, EVUNLOOP_ALL);	2492	ev_break (loop, EVBREAK_ALL);
1636	}	2493	}
1637		2494
1638	struct ev_signal signal_watcher;	2495	ev_signal signal_watcher;
1639	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	2496	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
1640	ev_signal_start (loop, &signal_watcher);	2497	ev_signal_start (loop, &signal_watcher);
1641		2498
1642		2499
1643	=head2 C<ev_child> - watch out for process status changes	2500	=head2 C<ev_child> - watch out for process status changes
…		…
1646	some child status changes (most typically when a child of yours dies or	2503	some child status changes (most typically when a child of yours dies or
1647	exits). It is permissible to install a child watcher I<after> the child	2504	exits). It is permissible to install a child watcher I<after> the child
1648	has been forked (which implies it might have already exited), as long	2505	has been forked (which implies it might have already exited), as long
1649	as the event loop isn't entered (or is continued from a watcher), i.e.,	2506	as the event loop isn't entered (or is continued from a watcher), i.e.,
1650	forking and then immediately registering a watcher for the child is fine,	2507	forking and then immediately registering a watcher for the child is fine,
1651	but forking and registering a watcher a few event loop iterations later is	2508	but forking and registering a watcher a few event loop iterations later or
1652	not.	2509	in the next callback invocation is not.
1653		2510
1654	Only the default event loop is capable of handling signals, and therefore	2511	Only the default event loop is capable of handling signals, and therefore
1655	you can only register child watchers in the default event loop.	2512	you can only register child watchers in the default event loop.
1656		2513
		2514	Due to some design glitches inside libev, child watchers will always be
		2515	handled at maximum priority (their priority is set to C<EV_MAXPRI> by
		2516	libev)
		2517
1657	=head3 Process Interaction	2518	=head3 Process Interaction
1658		2519
1659	Libev grabs C<SIGCHLD> as soon as the default event loop is	2520	Libev grabs C<SIGCHLD> as soon as the default event loop is
1660	initialised. This is necessary to guarantee proper behaviour even if	2521	initialised. This is necessary to guarantee proper behaviour even if the
1661	the first child watcher is started after the child exits. The occurrence	2522	first child watcher is started after the child exits. The occurrence
1662	of C<SIGCHLD> is recorded asynchronously, but child reaping is done	2523	of C<SIGCHLD> is recorded asynchronously, but child reaping is done
1663	synchronously as part of the event loop processing. Libev always reaps all	2524	synchronously as part of the event loop processing. Libev always reaps all
1664	children, even ones not watched.	2525	children, even ones not watched.
1665		2526
1666	=head3 Overriding the Built-In Processing	2527	=head3 Overriding the Built-In Processing
…		…
1676	=head3 Stopping the Child Watcher	2537	=head3 Stopping the Child Watcher
1677		2538
1678	Currently, the child watcher never gets stopped, even when the	2539	Currently, the child watcher never gets stopped, even when the
1679	child terminates, so normally one needs to stop the watcher in the	2540	child terminates, so normally one needs to stop the watcher in the
1680	callback. Future versions of libev might stop the watcher automatically	2541	callback. Future versions of libev might stop the watcher automatically
1681	when a child exit is detected.	2542	when a child exit is detected (calling C<ev_child_stop> twice is not a
		2543	problem).
1682		2544
1683	=head3 Watcher-Specific Functions and Data Members	2545	=head3 Watcher-Specific Functions and Data Members
1684		2546
1685	=over 4	2547	=over 4
1686		2548
…		…
1718	its completion.	2580	its completion.
1719		2581
1720	ev_child cw;	2582	ev_child cw;
1721		2583
1722	static void	2584	static void
1723	child_cb (EV_P_ struct ev_child *w, int revents)	2585	child_cb (EV_P_ ev_child *w, int revents)
1724	{	2586	{
1725	ev_child_stop (EV_A_ w);	2587	ev_child_stop (EV_A_ w);
1726	printf ("process %d exited with status %x\n", w->rpid, w->rstatus);	2588	printf ("process %d exited with status %x\n", w->rpid, w->rstatus);
1727	}	2589	}
1728		2590
…		…
1743		2605
1744		2606
1745	=head2 C<ev_stat> - did the file attributes just change?	2607	=head2 C<ev_stat> - did the file attributes just change?
1746		2608
1747	This watches a file system path for attribute changes. That is, it calls	2609	This watches a file system path for attribute changes. That is, it calls
1748	C<stat> regularly (or when the OS says it changed) and sees if it changed	2610	C<stat> on that path in regular intervals (or when the OS says it changed)
1749	compared to the last time, invoking the callback if it did.	2611	and sees if it changed compared to the last time, invoking the callback
		2612	if it did. Starting the watcher C<stat>'s the file, so only changes that
		2613	happen after the watcher has been started will be reported.
1750		2614
1751	The path does not need to exist: changing from "path exists" to "path does	2615	The path does not need to exist: changing from "path exists" to "path does
1752	not exist" is a status change like any other. The condition "path does	2616	not exist" is a status change like any other. The condition "path does not
1753	not exist" is signified by the C<st_nlink> field being zero (which is	2617	exist" (or more correctly "path cannot be stat'ed") is signified by the
1754	otherwise always forced to be at least one) and all the other fields of	2618	C<st_nlink> field being zero (which is otherwise always forced to be at
1755	the stat buffer having unspecified contents.	2619	least one) and all the other fields of the stat buffer having unspecified
		2620	contents.
1756		2621
1757	The path I<should> be absolute and I<must not> end in a slash. If it is	2622	The path I<must not> end in a slash or contain special components such as
		2623	C<.> or C<..>. The path I<should> be absolute: If it is relative and
1758	relative and your working directory changes, the behaviour is undefined.	2624	your working directory changes, then the behaviour is undefined.
1759		2625
1760	Since there is no standard kernel interface to do this, the portable	2626	Since there is no portable change notification interface available, the
1761	implementation simply calls C<stat (2)> regularly on the path to see if	2627	portable implementation simply calls C<stat(2)> regularly on the path
1762	it changed somehow. You can specify a recommended polling interval for	2628	to see if it changed somehow. You can specify a recommended polling
1763	this case. If you specify a polling interval of C<0> (highly recommended!)	2629	interval for this case. If you specify a polling interval of C<0> (highly
1764	then a I<suitable, unspecified default> value will be used (which	2630	recommended!) then a I<suitable, unspecified default> value will be used
1765	you can expect to be around five seconds, although this might change	2631	(which you can expect to be around five seconds, although this might
1766	dynamically). Libev will also impose a minimum interval which is currently	2632	change dynamically). Libev will also impose a minimum interval which is
1767	around C<0.1>, but thats usually overkill.	2633	currently around C<0.1>, but that's usually overkill.
1768		2634
1769	This watcher type is not meant for massive numbers of stat watchers,	2635	This watcher type is not meant for massive numbers of stat watchers,
1770	as even with OS-supported change notifications, this can be	2636	as even with OS-supported change notifications, this can be
1771	resource-intensive.	2637	resource-intensive.
1772		2638
1773	At the time of this writing, the only OS-specific interface implemented	2639	At the time of this writing, the only OS-specific interface implemented
1774	is the Linux inotify interface (implementing kqueue support is left as	2640	is the Linux inotify interface (implementing kqueue support is left as an
1775	an exercise for the reader. Note, however, that the author sees no way	2641	exercise for the reader. Note, however, that the author sees no way of
1776	of implementing C<ev_stat> semantics with kqueue).	2642	implementing C<ev_stat> semantics with kqueue, except as a hint).
1777		2643
1778	=head3 ABI Issues (Largefile Support)	2644	=head3 ABI Issues (Largefile Support)
1779		2645
1780	Libev by default (unless the user overrides this) uses the default	2646	Libev by default (unless the user overrides this) uses the default
1781	compilation environment, which means that on systems with large file	2647	compilation environment, which means that on systems with large file
1782	support disabled by default, you get the 32 bit version of the stat	2648	support disabled by default, you get the 32 bit version of the stat
1783	structure. When using the library from programs that change the ABI to	2649	structure. When using the library from programs that change the ABI to
1784	use 64 bit file offsets the programs will fail. In that case you have to	2650	use 64 bit file offsets the programs will fail. In that case you have to
1785	compile libev with the same flags to get binary compatibility. This is	2651	compile libev with the same flags to get binary compatibility. This is
1786	obviously the case with any flags that change the ABI, but the problem is	2652	obviously the case with any flags that change the ABI, but the problem is
1787	most noticeably disabled with ev_stat and large file support.	2653	most noticeably displayed with ev_stat and large file support.
1788		2654
1789	The solution for this is to lobby your distribution maker to make large	2655	The solution for this is to lobby your distribution maker to make large
1790	file interfaces available by default (as e.g. FreeBSD does) and not	2656	file interfaces available by default (as e.g. FreeBSD does) and not
1791	optional. Libev cannot simply switch on large file support because it has	2657	optional. Libev cannot simply switch on large file support because it has
1792	to exchange stat structures with application programs compiled using the	2658	to exchange stat structures with application programs compiled using the
1793	default compilation environment.	2659	default compilation environment.
1794		2660
1795	=head3 Inotify and Kqueue	2661	=head3 Inotify and Kqueue
1796		2662
1797	When C<inotify (7)> support has been compiled into libev (generally only	2663	When C<inotify (7)> support has been compiled into libev and present at
1798	available with Linux) and present at runtime, it will be used to speed up	2664	runtime, it will be used to speed up change detection where possible. The
1799	change detection where possible. The inotify descriptor will be created lazily	2665	inotify descriptor will be created lazily when the first C<ev_stat>
1800	when the first C<ev_stat> watcher is being started.	2666	watcher is being started.
1801		2667
1802	Inotify presence does not change the semantics of C<ev_stat> watchers	2668	Inotify presence does not change the semantics of C<ev_stat> watchers
1803	except that changes might be detected earlier, and in some cases, to avoid	2669	except that changes might be detected earlier, and in some cases, to avoid
1804	making regular C<stat> calls. Even in the presence of inotify support	2670	making regular C<stat> calls. Even in the presence of inotify support
1805	there are many cases where libev has to resort to regular C<stat> polling,	2671	there are many cases where libev has to resort to regular C<stat> polling,
1806	but as long as the path exists, libev usually gets away without polling.	2672	but as long as kernel 2.6.25 or newer is used (2.6.24 and older have too
		2673	many bugs), the path exists (i.e. stat succeeds), and the path resides on
		2674	a local filesystem (libev currently assumes only ext2/3, jfs, reiserfs and
		2675	xfs are fully working) libev usually gets away without polling.
1807		2676
1808	There is no support for kqueue, as apparently it cannot be used to	2677	There is no support for kqueue, as apparently it cannot be used to
1809	implement this functionality, due to the requirement of having a file	2678	implement this functionality, due to the requirement of having a file
1810	descriptor open on the object at all times, and detecting renames, unlinks	2679	descriptor open on the object at all times, and detecting renames, unlinks
1811	etc. is difficult.	2680	etc. is difficult.
1812		2681
		2682	=head3 C<stat ()> is a synchronous operation
		2683
		2684	Libev doesn't normally do any kind of I/O itself, and so is not blocking
		2685	the process. The exception are C<ev_stat> watchers - those call C<stat
		2686	()>, which is a synchronous operation.
		2687
		2688	For local paths, this usually doesn't matter: unless the system is very
		2689	busy or the intervals between stat's are large, a stat call will be fast,
		2690	as the path data is usually in memory already (except when starting the
		2691	watcher).
		2692
		2693	For networked file systems, calling C<stat ()> can block an indefinite
		2694	time due to network issues, and even under good conditions, a stat call
		2695	often takes multiple milliseconds.
		2696
		2697	Therefore, it is best to avoid using C<ev_stat> watchers on networked
		2698	paths, although this is fully supported by libev.
		2699
1813	=head3 The special problem of stat time resolution	2700	=head3 The special problem of stat time resolution
1814		2701
1815	The C<stat ()> system call only supports full-second resolution portably, and	2702	The C<stat ()> system call only supports full-second resolution portably,
1816	even on systems where the resolution is higher, most file systems still	2703	and even on systems where the resolution is higher, most file systems
1817	only support whole seconds.	2704	still only support whole seconds.
1818		2705
1819	That means that, if the time is the only thing that changes, you can	2706	That means that, if the time is the only thing that changes, you can
1820	easily miss updates: on the first update, C<ev_stat> detects a change and	2707	easily miss updates: on the first update, C<ev_stat> detects a change and
1821	calls your callback, which does something. When there is another update	2708	calls your callback, which does something. When there is another update
1822	within the same second, C<ev_stat> will be unable to detect unless the	2709	within the same second, C<ev_stat> will be unable to detect unless the
…		…
1961	Apart from keeping your process non-blocking (which is a useful	2848	Apart from keeping your process non-blocking (which is a useful
1962	effect on its own sometimes), idle watchers are a good place to do	2849	effect on its own sometimes), idle watchers are a good place to do
1963	"pseudo-background processing", or delay processing stuff to after the	2850	"pseudo-background processing", or delay processing stuff to after the
1964	event loop has handled all outstanding events.	2851	event loop has handled all outstanding events.
1965		2852
		2853	=head3 Abusing an C<ev_idle> watcher for its side-effect
		2854
		2855	As long as there is at least one active idle watcher, libev will never
		2856	sleep unnecessarily. Or in other words, it will loop as fast as possible.
		2857	For this to work, the idle watcher doesn't need to be invoked at all - the
		2858	lowest priority will do.
		2859
		2860	This mode of operation can be useful together with an C<ev_check> watcher,
		2861	to do something on each event loop iteration - for example to balance load
		2862	between different connections.
		2863
		2864	See L</Abusing an ev_check watcher for its side-effect> for a longer
		2865	example.
		2866
1966	=head3 Watcher-Specific Functions and Data Members	2867	=head3 Watcher-Specific Functions and Data Members
1967		2868
1968	=over 4	2869	=over 4
1969		2870
1970	=item ev_idle_init (ev_signal *, callback)	2871	=item ev_idle_init (ev_idle *, callback)
1971		2872
1972	Initialises and configures the idle watcher - it has no parameters of any	2873	Initialises and configures the idle watcher - it has no parameters of any
1973	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,	2874	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,
1974	believe me.	2875	believe me.
1975		2876
…		…
1979		2880
1980	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the	2881	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the
1981	callback, free it. Also, use no error checking, as usual.	2882	callback, free it. Also, use no error checking, as usual.
1982		2883
1983	static void	2884	static void
1984	idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)	2885	idle_cb (struct ev_loop *loop, ev_idle *w, int revents)
1985	{	2886	{
		2887	// stop the watcher
		2888	ev_idle_stop (loop, w);
		2889
		2890	// now we can free it
1986	free (w);	2891	free (w);
		2892
1987	// now do something you wanted to do when the program has	2893	// now do something you wanted to do when the program has
1988	// no longer anything immediate to do.	2894	// no longer anything immediate to do.
1989	}	2895	}
1990		2896
1991	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));	2897	ev_idle *idle_watcher = malloc (sizeof (ev_idle));
1992	ev_idle_init (idle_watcher, idle_cb);	2898	ev_idle_init (idle_watcher, idle_cb);
1993	ev_idle_start (loop, idle_cb);	2899	ev_idle_start (loop, idle_watcher);
1994		2900
1995		2901
1996	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!	2902	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!
1997		2903
1998	Prepare and check watchers are usually (but not always) used in pairs:	2904	Prepare and check watchers are often (but not always) used in pairs:
1999	prepare watchers get invoked before the process blocks and check watchers	2905	prepare watchers get invoked before the process blocks and check watchers
2000	afterwards.	2906	afterwards.
2001		2907
2002	You I<must not> call C<ev_loop> or similar functions that enter	2908	You I<must not> call C<ev_run> or similar functions that enter
2003	the current event loop from either C<ev_prepare> or C<ev_check>	2909	the current event loop from either C<ev_prepare> or C<ev_check>
2004	watchers. Other loops than the current one are fine, however. The	2910	watchers. Other loops than the current one are fine, however. The
2005	rationale behind this is that you do not need to check for recursion in	2911	rationale behind this is that you do not need to check for recursion in
2006	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,	2912	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,
2007	C<ev_check> so if you have one watcher of each kind they will always be	2913	C<ev_check> so if you have one watcher of each kind they will always be
…		…
2031	with priority higher than or equal to the event loop and one coroutine	2937	with priority higher than or equal to the event loop and one coroutine
2032	of lower priority, but only once, using idle watchers to keep the event	2938	of lower priority, but only once, using idle watchers to keep the event
2033	loop from blocking if lower-priority coroutines are active, thus mapping	2939	loop from blocking if lower-priority coroutines are active, thus mapping
2034	low-priority coroutines to idle/background tasks).	2940	low-priority coroutines to idle/background tasks).
2035		2941
2036	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)	2942	When used for this purpose, it is recommended to give C<ev_check> watchers
2037	priority, to ensure that they are being run before any other watchers	2943	highest (C<EV_MAXPRI>) priority, to ensure that they are being run before
2038	after the poll (this doesn't matter for C<ev_prepare> watchers).	2944	any other watchers after the poll (this doesn't matter for C<ev_prepare>
		2945	watchers).
2039		2946
2040	Also, C<ev_check> watchers (and C<ev_prepare> watchers, too) should not	2947	Also, C<ev_check> watchers (and C<ev_prepare> watchers, too) should not
2041	activate ("feed") events into libev. While libev fully supports this, they	2948	activate ("feed") events into libev. While libev fully supports this, they
2042	might get executed before other C<ev_check> watchers did their job. As	2949	might get executed before other C<ev_check> watchers did their job. As
2043	C<ev_check> watchers are often used to embed other (non-libev) event	2950	C<ev_check> watchers are often used to embed other (non-libev) event
2044	loops those other event loops might be in an unusable state until their	2951	loops those other event loops might be in an unusable state until their
2045	C<ev_check> watcher ran (always remind yourself to coexist peacefully with	2952	C<ev_check> watcher ran (always remind yourself to coexist peacefully with
2046	others).	2953	others).
2047		2954
		2955	=head3 Abusing an C<ev_check> watcher for its side-effect
		2956
		2957	C<ev_check> (and less often also C<ev_prepare>) watchers can also be
		2958	useful because they are called once per event loop iteration. For
		2959	example, if you want to handle a large number of connections fairly, you
		2960	normally only do a bit of work for each active connection, and if there
		2961	is more work to do, you wait for the next event loop iteration, so other
		2962	connections have a chance of making progress.
		2963
		2964	Using an C<ev_check> watcher is almost enough: it will be called on the
		2965	next event loop iteration. However, that isn't as soon as possible -
		2966	without external events, your C<ev_check> watcher will not be invoked.
		2967
		2968	This is where C<ev_idle> watchers come in handy - all you need is a
		2969	single global idle watcher that is active as long as you have one active
		2970	C<ev_check> watcher. The C<ev_idle> watcher makes sure the event loop
		2971	will not sleep, and the C<ev_check> watcher makes sure a callback gets
		2972	invoked. Neither watcher alone can do that.
		2973
2048	=head3 Watcher-Specific Functions and Data Members	2974	=head3 Watcher-Specific Functions and Data Members
2049		2975
2050	=over 4	2976	=over 4
2051		2977
2052	=item ev_prepare_init (ev_prepare *, callback)	2978	=item ev_prepare_init (ev_prepare *, callback)
…		…
2077		3003
2078	static ev_io iow [nfd];	3004	static ev_io iow [nfd];
2079	static ev_timer tw;	3005	static ev_timer tw;
2080		3006
2081	static void	3007	static void
2082	io_cb (ev_loop *loop, ev_io *w, int revents)	3008	io_cb (struct ev_loop *loop, ev_io *w, int revents)
2083	{	3009	{
2084	}	3010	}
2085		3011
2086	// create io watchers for each fd and a timer before blocking	3012	// create io watchers for each fd and a timer before blocking
2087	static void	3013	static void
2088	adns_prepare_cb (ev_loop *loop, ev_prepare *w, int revents)	3014	adns_prepare_cb (struct ev_loop *loop, ev_prepare *w, int revents)
2089	{	3015	{
2090	int timeout = 3600000;	3016	int timeout = 3600000;
2091	struct pollfd fds [nfd];	3017	struct pollfd fds [nfd];
2092	// actual code will need to loop here and realloc etc.	3018	// actual code will need to loop here and realloc etc.
2093	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));	3019	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
2094		3020
2095	/* the callback is illegal, but won't be called as we stop during check */	3021	/* the callback is illegal, but won't be called as we stop during check */
2096	ev_timer_init (&tw, 0, timeout * 1e-3);	3022	ev_timer_init (&tw, 0, timeout * 1e-3, 0.);
2097	ev_timer_start (loop, &tw);	3023	ev_timer_start (loop, &tw);
2098		3024
2099	// create one ev_io per pollfd	3025	// create one ev_io per pollfd
2100	for (int i = 0; i < nfd; ++i)	3026	for (int i = 0; i < nfd; ++i)
2101	{	3027	{
…		…
2108	}	3034	}
2109	}	3035	}
2110		3036
2111	// stop all watchers after blocking	3037	// stop all watchers after blocking
2112	static void	3038	static void
2113	adns_check_cb (ev_loop *loop, ev_check *w, int revents)	3039	adns_check_cb (struct ev_loop *loop, ev_check *w, int revents)
2114	{	3040	{
2115	ev_timer_stop (loop, &tw);	3041	ev_timer_stop (loop, &tw);
2116		3042
2117	for (int i = 0; i < nfd; ++i)	3043	for (int i = 0; i < nfd; ++i)
2118	{	3044	{
…		…
2175		3101
2176	if (timeout >= 0)	3102	if (timeout >= 0)
2177	// create/start timer	3103	// create/start timer
2178		3104
2179	// poll	3105	// poll
2180	ev_loop (EV_A_ 0);	3106	ev_run (EV_A_ 0);
2181		3107
2182	// stop timer again	3108	// stop timer again
2183	if (timeout >= 0)	3109	if (timeout >= 0)
2184	ev_timer_stop (EV_A_ &to);	3110	ev_timer_stop (EV_A_ &to);
2185		3111
…		…
2214	some fds have to be watched and handled very quickly (with low latency),	3140	some fds have to be watched and handled very quickly (with low latency),
2215	and even priorities and idle watchers might have too much overhead. In	3141	and even priorities and idle watchers might have too much overhead. In
2216	this case you would put all the high priority stuff in one loop and all	3142	this case you would put all the high priority stuff in one loop and all
2217	the rest in a second one, and embed the second one in the first.	3143	the rest in a second one, and embed the second one in the first.
2218		3144
2219	As long as the watcher is active, the callback will be invoked every time	3145	As long as the watcher is active, the callback will be invoked every
2220	there might be events pending in the embedded loop. The callback must then	3146	time there might be events pending in the embedded loop. The callback
2221	call C<ev_embed_sweep (mainloop, watcher)> to make a single sweep and invoke	3147	must then call C<ev_embed_sweep (mainloop, watcher)> to make a single
2222	their callbacks (you could also start an idle watcher to give the embedded	3148	sweep and invoke their callbacks (the callback doesn't need to invoke the
2223	loop strictly lower priority for example). You can also set the callback	3149	C<ev_embed_sweep> function directly, it could also start an idle watcher
2224	to C<0>, in which case the embed watcher will automatically execute the	3150	to give the embedded loop strictly lower priority for example).
2225	embedded loop sweep.
2226		3151
2227	As long as the watcher is started it will automatically handle events. The	3152	You can also set the callback to C<0>, in which case the embed watcher
2228	callback will be invoked whenever some events have been handled. You can	3153	will automatically execute the embedded loop sweep whenever necessary.
2229	set the callback to C<0> to avoid having to specify one if you are not
2230	interested in that.
2231		3154
2232	Also, there have not currently been made special provisions for forking:	3155	Fork detection will be handled transparently while the C<ev_embed> watcher
2233	when you fork, you not only have to call C<ev_loop_fork> on both loops,	3156	is active, i.e., the embedded loop will automatically be forked when the
2234	but you will also have to stop and restart any C<ev_embed> watchers	3157	embedding loop forks. In other cases, the user is responsible for calling
2235	yourself - but you can use a fork watcher to handle this automatically,	3158	C<ev_loop_fork> on the embedded loop.
2236	and future versions of libev might do just that.
2237		3159
2238	Unfortunately, not all backends are embeddable: only the ones returned by	3160	Unfortunately, not all backends are embeddable: only the ones returned by
2239	C<ev_embeddable_backends> are, which, unfortunately, does not include any	3161	C<ev_embeddable_backends> are, which, unfortunately, does not include any
2240	portable one.	3162	portable one.
2241		3163
…		…
2256		3178
2257	=over 4	3179	=over 4
2258		3180
2259	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)	3181	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
2260		3182
2261	=item ev_embed_set (ev_embed *, callback, struct ev_loop *embedded_loop)	3183	=item ev_embed_set (ev_embed *, struct ev_loop *embedded_loop)
2262		3184
2263	Configures the watcher to embed the given loop, which must be	3185	Configures the watcher to embed the given loop, which must be
2264	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be	3186	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
2265	invoked automatically, otherwise it is the responsibility of the callback	3187	invoked automatically, otherwise it is the responsibility of the callback
2266	to invoke it (it will continue to be called until the sweep has been done,	3188	to invoke it (it will continue to be called until the sweep has been done,
2267	if you do not want that, you need to temporarily stop the embed watcher).	3189	if you do not want that, you need to temporarily stop the embed watcher).
2268		3190
2269	=item ev_embed_sweep (loop, ev_embed *)	3191	=item ev_embed_sweep (loop, ev_embed *)
2270		3192
2271	Make a single, non-blocking sweep over the embedded loop. This works	3193	Make a single, non-blocking sweep over the embedded loop. This works
2272	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	3194	similarly to C<ev_run (embedded_loop, EVRUN_NOWAIT)>, but in the most
2273	appropriate way for embedded loops.	3195	appropriate way for embedded loops.
2274		3196
2275	=item struct ev_loop *other [read-only]	3197	=item struct ev_loop *other [read-only]
2276		3198
2277	The embedded event loop.	3199	The embedded event loop.
…		…
2286	C<loop_lo> (which is C<loop_hi> in the case no embeddable loop can be	3208	C<loop_lo> (which is C<loop_hi> in the case no embeddable loop can be
2287	used).	3209	used).
2288		3210
2289	struct ev_loop *loop_hi = ev_default_init (0);	3211	struct ev_loop *loop_hi = ev_default_init (0);
2290	struct ev_loop *loop_lo = 0;	3212	struct ev_loop *loop_lo = 0;
2291	struct ev_embed embed;	3213	ev_embed embed;
2292		3214
2293	// see if there is a chance of getting one that works	3215	// see if there is a chance of getting one that works
2294	// (remember that a flags value of 0 means autodetection)	3216	// (remember that a flags value of 0 means autodetection)
2295	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()	3217	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()
2296	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())	3218	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())
…		…
2310	kqueue implementation). Store the kqueue/socket-only event loop in	3232	kqueue implementation). Store the kqueue/socket-only event loop in
2311	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).	3233	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
2312		3234
2313	struct ev_loop *loop = ev_default_init (0);	3235	struct ev_loop *loop = ev_default_init (0);
2314	struct ev_loop *loop_socket = 0;	3236	struct ev_loop *loop_socket = 0;
2315	struct ev_embed embed;	3237	ev_embed embed;
2316		3238
2317	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)	3239	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
2318	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))	3240	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
2319	{	3241	{
2320	ev_embed_init (&embed, 0, loop_socket);	3242	ev_embed_init (&embed, 0, loop_socket);
…		…
2329		3251
2330	=head2 C<ev_fork> - the audacity to resume the event loop after a fork	3252	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
2331		3253
2332	Fork watchers are called when a C<fork ()> was detected (usually because	3254	Fork watchers are called when a C<fork ()> was detected (usually because
2333	whoever is a good citizen cared to tell libev about it by calling	3255	whoever is a good citizen cared to tell libev about it by calling
2334	C<ev_default_fork> or C<ev_loop_fork>). The invocation is done before the	3256	C<ev_loop_fork>). The invocation is done before the event loop blocks next
2335	event loop blocks next and before C<ev_check> watchers are being called,	3257	and before C<ev_check> watchers are being called, and only in the child
2336	and only in the child after the fork. If whoever good citizen calling	3258	after the fork. If whoever good citizen calling C<ev_default_fork> cheats
2337	C<ev_default_fork> cheats and calls it in the wrong process, the fork	3259	and calls it in the wrong process, the fork handlers will be invoked, too,
2338	handlers will be invoked, too, of course.	3260	of course.
		3261
		3262	=head3 The special problem of life after fork - how is it possible?
		3263
		3264	Most uses of C<fork()> consist of forking, then some simple calls to set
		3265	up/change the process environment, followed by a call to C<exec()>. This
		3266	sequence should be handled by libev without any problems.
		3267
		3268	This changes when the application actually wants to do event handling
		3269	in the child, or both parent in child, in effect "continuing" after the
		3270	fork.
		3271
		3272	The default mode of operation (for libev, with application help to detect
		3273	forks) is to duplicate all the state in the child, as would be expected
		3274	when I<either> the parent I<or> the child process continues.
		3275
		3276	When both processes want to continue using libev, then this is usually the
		3277	wrong result. In that case, usually one process (typically the parent) is
		3278	supposed to continue with all watchers in place as before, while the other
		3279	process typically wants to start fresh, i.e. without any active watchers.
		3280
		3281	The cleanest and most efficient way to achieve that with libev is to
		3282	simply create a new event loop, which of course will be "empty", and
		3283	use that for new watchers. This has the advantage of not touching more
		3284	memory than necessary, and thus avoiding the copy-on-write, and the
		3285	disadvantage of having to use multiple event loops (which do not support
		3286	signal watchers).
		3287
		3288	When this is not possible, or you want to use the default loop for
		3289	other reasons, then in the process that wants to start "fresh", call
		3290	C<ev_loop_destroy (EV_DEFAULT)> followed by C<ev_default_loop (...)>.
		3291	Destroying the default loop will "orphan" (not stop) all registered
		3292	watchers, so you have to be careful not to execute code that modifies
		3293	those watchers. Note also that in that case, you have to re-register any
		3294	signal watchers.
2339		3295
2340	=head3 Watcher-Specific Functions and Data Members	3296	=head3 Watcher-Specific Functions and Data Members
2341		3297
2342	=over 4	3298	=over 4
2343		3299
2344	=item ev_fork_init (ev_signal *, callback)	3300	=item ev_fork_init (ev_fork *, callback)
2345		3301
2346	Initialises and configures the fork watcher - it has no parameters of any	3302	Initialises and configures the fork watcher - it has no parameters of any
2347	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	3303	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
2348	believe me.	3304	really.
2349		3305
2350	=back	3306	=back
2351		3307
2352		3308
		3309	=head2 C<ev_cleanup> - even the best things end
		3310
		3311	Cleanup watchers are called just before the event loop is being destroyed
		3312	by a call to C<ev_loop_destroy>.
		3313
		3314	While there is no guarantee that the event loop gets destroyed, cleanup
		3315	watchers provide a convenient method to install cleanup hooks for your
		3316	program, worker threads and so on - you just to make sure to destroy the
		3317	loop when you want them to be invoked.
		3318
		3319	Cleanup watchers are invoked in the same way as any other watcher. Unlike
		3320	all other watchers, they do not keep a reference to the event loop (which
		3321	makes a lot of sense if you think about it). Like all other watchers, you
		3322	can call libev functions in the callback, except C<ev_cleanup_start>.
		3323
		3324	=head3 Watcher-Specific Functions and Data Members
		3325
		3326	=over 4
		3327
		3328	=item ev_cleanup_init (ev_cleanup *, callback)
		3329
		3330	Initialises and configures the cleanup watcher - it has no parameters of
		3331	any kind. There is a C<ev_cleanup_set> macro, but using it is utterly
		3332	pointless, I assure you.
		3333
		3334	=back
		3335
		3336	Example: Register an atexit handler to destroy the default loop, so any
		3337	cleanup functions are called.
		3338
		3339	static void
		3340	program_exits (void)
		3341	{
		3342	ev_loop_destroy (EV_DEFAULT_UC);
		3343	}
		3344
		3345	...
		3346	atexit (program_exits);
		3347
		3348
2353	=head2 C<ev_async> - how to wake up another event loop	3349	=head2 C<ev_async> - how to wake up an event loop
2354		3350
2355	In general, you cannot use an C<ev_loop> from multiple threads or other	3351	In general, you cannot use an C<ev_loop> from multiple threads or other
2356	asynchronous sources such as signal handlers (as opposed to multiple event	3352	asynchronous sources such as signal handlers (as opposed to multiple event
2357	loops - those are of course safe to use in different threads).	3353	loops - those are of course safe to use in different threads).
2358		3354
2359	Sometimes, however, you need to wake up another event loop you do not	3355	Sometimes, however, you need to wake up an event loop you do not control,
2360	control, for example because it belongs to another thread. This is what	3356	for example because it belongs to another thread. This is what C<ev_async>
2361	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you	3357	watchers do: as long as the C<ev_async> watcher is active, you can signal
2362	can signal it by calling C<ev_async_send>, which is thread- and signal	3358	it by calling C<ev_async_send>, which is thread- and signal safe.
2363	safe.
2364		3359
2365	This functionality is very similar to C<ev_signal> watchers, as signals,	3360	This functionality is very similar to C<ev_signal> watchers, as signals,
2366	too, are asynchronous in nature, and signals, too, will be compressed	3361	too, are asynchronous in nature, and signals, too, will be compressed
2367	(i.e. the number of callback invocations may be less than the number of	3362	(i.e. the number of callback invocations may be less than the number of
2368	C<ev_async_sent> calls).	3363	C<ev_async_send> calls). In fact, you could use signal watchers as a kind
2369		3364	of "global async watchers" by using a watcher on an otherwise unused
2370	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not	3365	signal, and C<ev_feed_signal> to signal this watcher from another thread,
2371	just the default loop.	3366	even without knowing which loop owns the signal.
2372		3367
2373	=head3 Queueing	3368	=head3 Queueing
2374		3369
2375	C<ev_async> does not support queueing of data in any way. The reason	3370	C<ev_async> does not support queueing of data in any way. The reason
2376	is that the author does not know of a simple (or any) algorithm for a	3371	is that the author does not know of a simple (or any) algorithm for a
2377	multiple-writer-single-reader queue that works in all cases and doesn't	3372	multiple-writer-single-reader queue that works in all cases and doesn't
2378	need elaborate support such as pthreads.	3373	need elaborate support such as pthreads or unportable memory access
		3374	semantics.
2379		3375
2380	That means that if you want to queue data, you have to provide your own	3376	That means that if you want to queue data, you have to provide your own
2381	queue. But at least I can tell you how to implement locking around your	3377	queue. But at least I can tell you how to implement locking around your
2382	queue:	3378	queue:
2383		3379
…		…
2461	=over 4	3457	=over 4
2462		3458
2463	=item ev_async_init (ev_async *, callback)	3459	=item ev_async_init (ev_async *, callback)
2464		3460
2465	Initialises and configures the async watcher - it has no parameters of any	3461	Initialises and configures the async watcher - it has no parameters of any
2466	kind. There is a C<ev_asynd_set> macro, but using it is utterly pointless,	3462	kind. There is a C<ev_async_set> macro, but using it is utterly pointless,
2467	trust me.	3463	trust me.
2468		3464
2469	=item ev_async_send (loop, ev_async *)	3465	=item ev_async_send (loop, ev_async *)
2470		3466
2471	Sends/signals/activates the given C<ev_async> watcher, that is, feeds	3467	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
2472	an C<EV_ASYNC> event on the watcher into the event loop. Unlike	3468	an C<EV_ASYNC> event on the watcher into the event loop, and instantly
		3469	returns.
		3470
2473	C<ev_feed_event>, this call is safe to do from other threads, signal or	3471	Unlike C<ev_feed_event>, this call is safe to do from other threads,
2474	similar contexts (see the discussion of C<EV_ATOMIC_T> in the embedding	3472	signal or similar contexts (see the discussion of C<EV_ATOMIC_T> in the
2475	section below on what exactly this means).	3473	embedding section below on what exactly this means).
2476		3474
2477	This call incurs the overhead of a system call only once per loop iteration,	3475	Note that, as with other watchers in libev, multiple events might get
2478	so while the overhead might be noticeable, it doesn't apply to repeated	3476	compressed into a single callback invocation (another way to look at
2479	calls to C<ev_async_send>.	3477	this is that C<ev_async> watchers are level-triggered: they are set on
		3478	C<ev_async_send>, reset when the event loop detects that).
		3479
		3480	This call incurs the overhead of at most one extra system call per event
		3481	loop iteration, if the event loop is blocked, and no syscall at all if
		3482	the event loop (or your program) is processing events. That means that
		3483	repeated calls are basically free (there is no need to avoid calls for
		3484	performance reasons) and that the overhead becomes smaller (typically
		3485	zero) under load.
2480		3486
2481	=item bool = ev_async_pending (ev_async *)	3487	=item bool = ev_async_pending (ev_async *)
2482		3488
2483	Returns a non-zero value when C<ev_async_send> has been called on the	3489	Returns a non-zero value when C<ev_async_send> has been called on the
2484	watcher but the event has not yet been processed (or even noted) by the	3490	watcher but the event has not yet been processed (or even noted) by the
…		…
2487	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When	3493	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When
2488	the loop iterates next and checks for the watcher to have become active,	3494	the loop iterates next and checks for the watcher to have become active,
2489	it will reset the flag again. C<ev_async_pending> can be used to very	3495	it will reset the flag again. C<ev_async_pending> can be used to very
2490	quickly check whether invoking the loop might be a good idea.	3496	quickly check whether invoking the loop might be a good idea.
2491		3497
2492	Not that this does I<not> check whether the watcher itself is pending, only	3498	Not that this does I<not> check whether the watcher itself is pending,
2493	whether it has been requested to make this watcher pending.	3499	only whether it has been requested to make this watcher pending: there
		3500	is a time window between the event loop checking and resetting the async
		3501	notification, and the callback being invoked.
2494		3502
2495	=back	3503	=back
2496		3504
2497		3505
2498	=head1 OTHER FUNCTIONS	3506	=head1 OTHER FUNCTIONS
…		…
2502	=over 4	3510	=over 4
2503		3511
2504	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback)	3512	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback)
2505		3513
2506	This function combines a simple timer and an I/O watcher, calls your	3514	This function combines a simple timer and an I/O watcher, calls your
2507	callback on whichever event happens first and automatically stop both	3515	callback on whichever event happens first and automatically stops both
2508	watchers. This is useful if you want to wait for a single event on an fd	3516	watchers. This is useful if you want to wait for a single event on an fd
2509	or timeout without having to allocate/configure/start/stop/free one or	3517	or timeout without having to allocate/configure/start/stop/free one or
2510	more watchers yourself.	3518	more watchers yourself.
2511		3519
2512	If C<fd> is less than 0, then no I/O watcher will be started and events	3520	If C<fd> is less than 0, then no I/O watcher will be started and the
2513	is being ignored. Otherwise, an C<ev_io> watcher for the given C<fd> and	3521	C<events> argument is being ignored. Otherwise, an C<ev_io> watcher for
2514	C<events> set will be created and started.	3522	the given C<fd> and C<events> set will be created and started.
2515		3523
2516	If C<timeout> is less than 0, then no timeout watcher will be	3524	If C<timeout> is less than 0, then no timeout watcher will be
2517	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and	3525	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
2518	repeat = 0) will be started. While C<0> is a valid timeout, it is of	3526	repeat = 0) will be started. C<0> is a valid timeout.
2519	dubious value.
2520		3527
2521	The callback has the type C<void (*cb)(int revents, void *arg)> and gets	3528	The callback has the type C<void (*cb)(int revents, void *arg)> and is
2522	passed an C<revents> set like normal event callbacks (a combination of	3529	passed an C<revents> set like normal event callbacks (a combination of
2523	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>	3530	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMER>) and the C<arg>
2524	value passed to C<ev_once>:	3531	value passed to C<ev_once>. Note that it is possible to receive I<both>
		3532	a timeout and an io event at the same time - you probably should give io
		3533	events precedence.
		3534
		3535	Example: wait up to ten seconds for data to appear on STDIN_FILENO.
2525		3536
2526	static void stdin_ready (int revents, void *arg)	3537	static void stdin_ready (int revents, void *arg)
2527	{	3538	{
		3539	if (revents & EV_READ)
		3540	/* stdin might have data for us, joy! */;
2528	if (revents & EV_TIMEOUT)	3541	else if (revents & EV_TIMER)
2529	/* doh, nothing entered */;	3542	/* doh, nothing entered */;
2530	else if (revents & EV_READ)
2531	/* stdin might have data for us, joy! */;
2532	}	3543	}
2533		3544
2534	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	3545	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
2535		3546
2536	=item ev_feed_event (ev_loop *, watcher *, int revents)
2537
2538	Feeds the given event set into the event loop, as if the specified event
2539	had happened for the specified watcher (which must be a pointer to an
2540	initialised but not necessarily started event watcher).
2541
2542	=item ev_feed_fd_event (ev_loop *, int fd, int revents)	3547	=item ev_feed_fd_event (loop, int fd, int revents)
2543		3548
2544	Feed an event on the given fd, as if a file descriptor backend detected	3549	Feed an event on the given fd, as if a file descriptor backend detected
2545	the given events it.	3550	the given events.
2546		3551
2547	=item ev_feed_signal_event (ev_loop *loop, int signum)	3552	=item ev_feed_signal_event (loop, int signum)
2548		3553
2549	Feed an event as if the given signal occurred (C<loop> must be the default	3554	Feed an event as if the given signal occurred. See also C<ev_feed_signal>,
2550	loop!).	3555	which is async-safe.
2551		3556
2552	=back	3557	=back
		3558
		3559
		3560	=head1 COMMON OR USEFUL IDIOMS (OR BOTH)
		3561
		3562	This section explains some common idioms that are not immediately
		3563	obvious. Note that examples are sprinkled over the whole manual, and this
		3564	section only contains stuff that wouldn't fit anywhere else.
		3565
		3566	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
		3567
		3568	Each watcher has, by default, a C<void *data> member that you can read
		3569	or modify at any time: libev will completely ignore it. This can be used
		3570	to associate arbitrary data with your watcher. If you need more data and
		3571	don't want to allocate memory separately and store a pointer to it in that
		3572	data member, you can also "subclass" the watcher type and provide your own
		3573	data:
		3574
		3575	struct my_io
		3576	{
		3577	ev_io io;
		3578	int otherfd;
		3579	void *somedata;
		3580	struct whatever *mostinteresting;
		3581	};
		3582
		3583	...
		3584	struct my_io w;
		3585	ev_io_init (&w.io, my_cb, fd, EV_READ);
		3586
		3587	And since your callback will be called with a pointer to the watcher, you
		3588	can cast it back to your own type:
		3589
		3590	static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)
		3591	{
		3592	struct my_io *w = (struct my_io *)w_;
		3593	...
		3594	}
		3595
		3596	More interesting and less C-conformant ways of casting your callback
		3597	function type instead have been omitted.
		3598
		3599	=head2 BUILDING YOUR OWN COMPOSITE WATCHERS
		3600
		3601	Another common scenario is to use some data structure with multiple
		3602	embedded watchers, in effect creating your own watcher that combines
		3603	multiple libev event sources into one "super-watcher":
		3604
		3605	struct my_biggy
		3606	{
		3607	int some_data;
		3608	ev_timer t1;
		3609	ev_timer t2;
		3610	}
		3611
		3612	In this case getting the pointer to C<my_biggy> is a bit more
		3613	complicated: Either you store the address of your C<my_biggy> struct in
		3614	the C<data> member of the watcher (for woozies or C++ coders), or you need
		3615	to use some pointer arithmetic using C<offsetof> inside your watchers (for
		3616	real programmers):
		3617
		3618	#include <stddef.h>
		3619
		3620	static void
		3621	t1_cb (EV_P_ ev_timer *w, int revents)
		3622	{
		3623	struct my_biggy big = (struct my_biggy *)
		3624	(((char *)w) - offsetof (struct my_biggy, t1));
		3625	}
		3626
		3627	static void
		3628	t2_cb (EV_P_ ev_timer *w, int revents)
		3629	{
		3630	struct my_biggy big = (struct my_biggy *)
		3631	(((char *)w) - offsetof (struct my_biggy, t2));
		3632	}
		3633
		3634	=head2 AVOIDING FINISHING BEFORE RETURNING
		3635
		3636	Often you have structures like this in event-based programs:
		3637
		3638	callback ()
		3639	{
		3640	free (request);
		3641	}
		3642
		3643	request = start_new_request (..., callback);
		3644
		3645	The intent is to start some "lengthy" operation. The C<request> could be
		3646	used to cancel the operation, or do other things with it.
		3647
		3648	It's not uncommon to have code paths in C<start_new_request> that
		3649	immediately invoke the callback, for example, to report errors. Or you add
		3650	some caching layer that finds that it can skip the lengthy aspects of the
		3651	operation and simply invoke the callback with the result.
		3652
		3653	The problem here is that this will happen I<before> C<start_new_request>
		3654	has returned, so C<request> is not set.
		3655
		3656	Even if you pass the request by some safer means to the callback, you
		3657	might want to do something to the request after starting it, such as
		3658	canceling it, which probably isn't working so well when the callback has
		3659	already been invoked.
		3660
		3661	A common way around all these issues is to make sure that
		3662	C<start_new_request> I<always> returns before the callback is invoked. If
		3663	C<start_new_request> immediately knows the result, it can artificially
		3664	delay invoking the callback by using a C<prepare> or C<idle> watcher for
		3665	example, or more sneakily, by reusing an existing (stopped) watcher and
		3666	pushing it into the pending queue:
		3667
		3668	ev_set_cb (watcher, callback);
		3669	ev_feed_event (EV_A_ watcher, 0);
		3670
		3671	This way, C<start_new_request> can safely return before the callback is
		3672	invoked, while not delaying callback invocation too much.
		3673
		3674	=head2 MODEL/NESTED EVENT LOOP INVOCATIONS AND EXIT CONDITIONS
		3675
		3676	Often (especially in GUI toolkits) there are places where you have
		3677	I<modal> interaction, which is most easily implemented by recursively
		3678	invoking C<ev_run>.
		3679
		3680	This brings the problem of exiting - a callback might want to finish the
		3681	main C<ev_run> call, but not the nested one (e.g. user clicked "Quit", but
		3682	a modal "Are you sure?" dialog is still waiting), or just the nested one
		3683	and not the main one (e.g. user clocked "Ok" in a modal dialog), or some
		3684	other combination: In these cases, a simple C<ev_break> will not work.
		3685
		3686	The solution is to maintain "break this loop" variable for each C<ev_run>
		3687	invocation, and use a loop around C<ev_run> until the condition is
		3688	triggered, using C<EVRUN_ONCE>:
		3689
		3690	// main loop
		3691	int exit_main_loop = 0;
		3692
		3693	while (!exit_main_loop)
		3694	ev_run (EV_DEFAULT_ EVRUN_ONCE);
		3695
		3696	// in a modal watcher
		3697	int exit_nested_loop = 0;
		3698
		3699	while (!exit_nested_loop)
		3700	ev_run (EV_A_ EVRUN_ONCE);
		3701
		3702	To exit from any of these loops, just set the corresponding exit variable:
		3703
		3704	// exit modal loop
		3705	exit_nested_loop = 1;
		3706
		3707	// exit main program, after modal loop is finished
		3708	exit_main_loop = 1;
		3709
		3710	// exit both
		3711	exit_main_loop = exit_nested_loop = 1;
		3712
		3713	=head2 THREAD LOCKING EXAMPLE
		3714
		3715	Here is a fictitious example of how to run an event loop in a different
		3716	thread from where callbacks are being invoked and watchers are
		3717	created/added/removed.
		3718
		3719	For a real-world example, see the C<EV::Loop::Async> perl module,
		3720	which uses exactly this technique (which is suited for many high-level
		3721	languages).
		3722
		3723	The example uses a pthread mutex to protect the loop data, a condition
		3724	variable to wait for callback invocations, an async watcher to notify the
		3725	event loop thread and an unspecified mechanism to wake up the main thread.
		3726
		3727	First, you need to associate some data with the event loop:
		3728
		3729	typedef struct {
		3730	mutex_t lock; /* global loop lock */
		3731	ev_async async_w;
		3732	thread_t tid;
		3733	cond_t invoke_cv;
		3734	} userdata;
		3735
		3736	void prepare_loop (EV_P)
		3737	{
		3738	// for simplicity, we use a static userdata struct.
		3739	static userdata u;
		3740
		3741	ev_async_init (&u->async_w, async_cb);
		3742	ev_async_start (EV_A_ &u->async_w);
		3743
		3744	pthread_mutex_init (&u->lock, 0);
		3745	pthread_cond_init (&u->invoke_cv, 0);
		3746
		3747	// now associate this with the loop
		3748	ev_set_userdata (EV_A_ u);
		3749	ev_set_invoke_pending_cb (EV_A_ l_invoke);
		3750	ev_set_loop_release_cb (EV_A_ l_release, l_acquire);
		3751
		3752	// then create the thread running ev_run
		3753	pthread_create (&u->tid, 0, l_run, EV_A);
		3754	}
		3755
		3756	The callback for the C<ev_async> watcher does nothing: the watcher is used
		3757	solely to wake up the event loop so it takes notice of any new watchers
		3758	that might have been added:
		3759
		3760	static void
		3761	async_cb (EV_P_ ev_async *w, int revents)
		3762	{
		3763	// just used for the side effects
		3764	}
		3765
		3766	The C<l_release> and C<l_acquire> callbacks simply unlock/lock the mutex
		3767	protecting the loop data, respectively.
		3768
		3769	static void
		3770	l_release (EV_P)
		3771	{
		3772	userdata *u = ev_userdata (EV_A);
		3773	pthread_mutex_unlock (&u->lock);
		3774	}
		3775
		3776	static void
		3777	l_acquire (EV_P)
		3778	{
		3779	userdata *u = ev_userdata (EV_A);
		3780	pthread_mutex_lock (&u->lock);
		3781	}
		3782
		3783	The event loop thread first acquires the mutex, and then jumps straight
		3784	into C<ev_run>:
		3785
		3786	void *
		3787	l_run (void *thr_arg)
		3788	{
		3789	struct ev_loop *loop = (struct ev_loop *)thr_arg;
		3790
		3791	l_acquire (EV_A);
		3792	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
		3793	ev_run (EV_A_ 0);
		3794	l_release (EV_A);
		3795
		3796	return 0;
		3797	}
		3798
		3799	Instead of invoking all pending watchers, the C<l_invoke> callback will
		3800	signal the main thread via some unspecified mechanism (signals? pipe
		3801	writes? C<Async::Interrupt>?) and then waits until all pending watchers
		3802	have been called (in a while loop because a) spurious wakeups are possible
		3803	and b) skipping inter-thread-communication when there are no pending
		3804	watchers is very beneficial):
		3805
		3806	static void
		3807	l_invoke (EV_P)
		3808	{
		3809	userdata *u = ev_userdata (EV_A);
		3810
		3811	while (ev_pending_count (EV_A))
		3812	{
		3813	wake_up_other_thread_in_some_magic_or_not_so_magic_way ();
		3814	pthread_cond_wait (&u->invoke_cv, &u->lock);
		3815	}
		3816	}
		3817
		3818	Now, whenever the main thread gets told to invoke pending watchers, it
		3819	will grab the lock, call C<ev_invoke_pending> and then signal the loop
		3820	thread to continue:
		3821
		3822	static void
		3823	real_invoke_pending (EV_P)
		3824	{
		3825	userdata *u = ev_userdata (EV_A);
		3826
		3827	pthread_mutex_lock (&u->lock);
		3828	ev_invoke_pending (EV_A);
		3829	pthread_cond_signal (&u->invoke_cv);
		3830	pthread_mutex_unlock (&u->lock);
		3831	}
		3832
		3833	Whenever you want to start/stop a watcher or do other modifications to an
		3834	event loop, you will now have to lock:
		3835
		3836	ev_timer timeout_watcher;
		3837	userdata *u = ev_userdata (EV_A);
		3838
		3839	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
		3840
		3841	pthread_mutex_lock (&u->lock);
		3842	ev_timer_start (EV_A_ &timeout_watcher);
		3843	ev_async_send (EV_A_ &u->async_w);
		3844	pthread_mutex_unlock (&u->lock);
		3845
		3846	Note that sending the C<ev_async> watcher is required because otherwise
		3847	an event loop currently blocking in the kernel will have no knowledge
		3848	about the newly added timer. By waking up the loop it will pick up any new
		3849	watchers in the next event loop iteration.
		3850
		3851	=head2 THREADS, COROUTINES, CONTINUATIONS, QUEUES... INSTEAD OF CALLBACKS
		3852
		3853	While the overhead of a callback that e.g. schedules a thread is small, it
		3854	is still an overhead. If you embed libev, and your main usage is with some
		3855	kind of threads or coroutines, you might want to customise libev so that
		3856	doesn't need callbacks anymore.
		3857
		3858	Imagine you have coroutines that you can switch to using a function
		3859	C<switch_to (coro)>, that libev runs in a coroutine called C<libev_coro>
		3860	and that due to some magic, the currently active coroutine is stored in a
		3861	global called C<current_coro>. Then you can build your own "wait for libev
		3862	event" primitive by changing C<EV_CB_DECLARE> and C<EV_CB_INVOKE> (note
		3863	the differing C<;> conventions):
		3864
		3865	#define EV_CB_DECLARE(type) struct my_coro *cb;
		3866	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)
		3867
		3868	That means instead of having a C callback function, you store the
		3869	coroutine to switch to in each watcher, and instead of having libev call
		3870	your callback, you instead have it switch to that coroutine.
		3871
		3872	A coroutine might now wait for an event with a function called
		3873	C<wait_for_event>. (the watcher needs to be started, as always, but it doesn't
		3874	matter when, or whether the watcher is active or not when this function is
		3875	called):
		3876
		3877	void
		3878	wait_for_event (ev_watcher *w)
		3879	{
		3880	ev_set_cb (w, current_coro);
		3881	switch_to (libev_coro);
		3882	}
		3883
		3884	That basically suspends the coroutine inside C<wait_for_event> and
		3885	continues the libev coroutine, which, when appropriate, switches back to
		3886	this or any other coroutine.
		3887
		3888	You can do similar tricks if you have, say, threads with an event queue -
		3889	instead of storing a coroutine, you store the queue object and instead of
		3890	switching to a coroutine, you push the watcher onto the queue and notify
		3891	any waiters.
		3892
		3893	To embed libev, see L</EMBEDDING>, but in short, it's easiest to create two
		3894	files, F<my_ev.h> and F<my_ev.c> that include the respective libev files:
		3895
		3896	// my_ev.h
		3897	#define EV_CB_DECLARE(type) struct my_coro *cb;
		3898	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb);
		3899	#include "../libev/ev.h"
		3900
		3901	// my_ev.c
		3902	#define EV_H "my_ev.h"
		3903	#include "../libev/ev.c"
		3904
		3905	And then use F<my_ev.h> when you would normally use F<ev.h>, and compile
		3906	F<my_ev.c> into your project. When properly specifying include paths, you
		3907	can even use F<ev.h> as header file name directly.
2553		3908
2554		3909
2555	=head1 LIBEVENT EMULATION	3910	=head1 LIBEVENT EMULATION
2556		3911
2557	Libev offers a compatibility emulation layer for libevent. It cannot	3912	Libev offers a compatibility emulation layer for libevent. It cannot
2558	emulate the internals of libevent, so here are some usage hints:	3913	emulate the internals of libevent, so here are some usage hints:
2559		3914
2560	=over 4	3915	=over 4
		3916
		3917	=item * Only the libevent-1.4.1-beta API is being emulated.
		3918
		3919	This was the newest libevent version available when libev was implemented,
		3920	and is still mostly unchanged in 2010.
2561		3921
2562	=item * Use it by including <event.h>, as usual.	3922	=item * Use it by including <event.h>, as usual.
2563		3923
2564	=item * The following members are fully supported: ev_base, ev_callback,	3924	=item * The following members are fully supported: ev_base, ev_callback,
2565	ev_arg, ev_fd, ev_res, ev_events.	3925	ev_arg, ev_fd, ev_res, ev_events.
…		…
2571	=item * Priorities are not currently supported. Initialising priorities	3931	=item * Priorities are not currently supported. Initialising priorities
2572	will fail and all watchers will have the same priority, even though there	3932	will fail and all watchers will have the same priority, even though there
2573	is an ev_pri field.	3933	is an ev_pri field.
2574		3934
2575	=item * In libevent, the last base created gets the signals, in libev, the	3935	=item * In libevent, the last base created gets the signals, in libev, the
2576	first base created (== the default loop) gets the signals.	3936	base that registered the signal gets the signals.
2577		3937
2578	=item * Other members are not supported.	3938	=item * Other members are not supported.
2579		3939
2580	=item * The libev emulation is I<not> ABI compatible to libevent, you need	3940	=item * The libev emulation is I<not> ABI compatible to libevent, you need
2581	to use the libev header file and library.	3941	to use the libev header file and library.
2582		3942
2583	=back	3943	=back
2584		3944
2585	=head1 C++ SUPPORT	3945	=head1 C++ SUPPORT
		3946
		3947	=head2 C API
		3948
		3949	The normal C API should work fine when used from C++: both ev.h and the
		3950	libev sources can be compiled as C++. Therefore, code that uses the C API
		3951	will work fine.
		3952
		3953	Proper exception specifications might have to be added to callbacks passed
		3954	to libev: exceptions may be thrown only from watcher callbacks, all
		3955	other callbacks (allocator, syserr, loop acquire/release and periodic
		3956	reschedule callbacks) must not throw exceptions, and might need a C<throw
		3957	()> specification. If you have code that needs to be compiled as both C
		3958	and C++ you can use the C<EV_THROW> macro for this:
		3959
		3960	static void
		3961	fatal_error (const char *msg) EV_THROW
		3962	{
		3963	perror (msg);
		3964	abort ();
		3965	}
		3966
		3967	...
		3968	ev_set_syserr_cb (fatal_error);
		3969
		3970	The only API functions that can currently throw exceptions are C<ev_run>,
		3971	C<ev_invoke>, C<ev_invoke_pending> and C<ev_loop_destroy> (the latter
		3972	because it runs cleanup watchers).
		3973
		3974	Throwing exceptions in watcher callbacks is only supported if libev itself
		3975	is compiled with a C++ compiler or your C and C++ environments allow
		3976	throwing exceptions through C libraries (most do).
		3977
		3978	=head2 C++ API
2586		3979
2587	Libev comes with some simplistic wrapper classes for C++ that mainly allow	3980	Libev comes with some simplistic wrapper classes for C++ that mainly allow
2588	you to use some convenience methods to start/stop watchers and also change	3981	you to use some convenience methods to start/stop watchers and also change
2589	the callback model to a model using method callbacks on objects.	3982	the callback model to a model using method callbacks on objects.
2590		3983
…		…
2600	Care has been taken to keep the overhead low. The only data member the C++	3993	Care has been taken to keep the overhead low. The only data member the C++
2601	classes add (compared to plain C-style watchers) is the event loop pointer	3994	classes add (compared to plain C-style watchers) is the event loop pointer
2602	that the watcher is associated with (or no additional members at all if	3995	that the watcher is associated with (or no additional members at all if
2603	you disable C<EV_MULTIPLICITY> when embedding libev).	3996	you disable C<EV_MULTIPLICITY> when embedding libev).
2604		3997
2605	Currently, functions, and static and non-static member functions can be	3998	Currently, functions, static and non-static member functions and classes
2606	used as callbacks. Other types should be easy to add as long as they only	3999	with C<operator ()> can be used as callbacks. Other types should be easy
2607	need one additional pointer for context. If you need support for other	4000	to add as long as they only need one additional pointer for context. If
2608	types of functors please contact the author (preferably after implementing	4001	you need support for other types of functors please contact the author
2609	it).	4002	(preferably after implementing it).
		4003
		4004	For all this to work, your C++ compiler either has to use the same calling
		4005	conventions as your C compiler (for static member functions), or you have
		4006	to embed libev and compile libev itself as C++.
2610		4007
2611	Here is a list of things available in the C<ev> namespace:	4008	Here is a list of things available in the C<ev> namespace:
2612		4009
2613	=over 4	4010	=over 4
2614		4011
…		…
2624	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.	4021	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.
2625		4022
2626	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of	4023	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of
2627	the same name in the C<ev> namespace, with the exception of C<ev_signal>	4024	the same name in the C<ev> namespace, with the exception of C<ev_signal>
2628	which is called C<ev::sig> to avoid clashes with the C<signal> macro	4025	which is called C<ev::sig> to avoid clashes with the C<signal> macro
2629	defines by many implementations.	4026	defined by many implementations.
2630		4027
2631	All of those classes have these methods:	4028	All of those classes have these methods:
2632		4029
2633	=over 4	4030	=over 4
2634		4031
2635	=item ev::TYPE::TYPE ()	4032	=item ev::TYPE::TYPE ()
2636		4033
2637	=item ev::TYPE::TYPE (struct ev_loop *)	4034	=item ev::TYPE::TYPE (loop)
2638		4035
2639	=item ev::TYPE::~TYPE	4036	=item ev::TYPE::~TYPE
2640		4037
2641	The constructor (optionally) takes an event loop to associate the watcher	4038	The constructor (optionally) takes an event loop to associate the watcher
2642	with. If it is omitted, it will use C<EV_DEFAULT>.	4039	with. If it is omitted, it will use C<EV_DEFAULT>.
…		…
2674		4071
2675	myclass obj;	4072	myclass obj;
2676	ev::io iow;	4073	ev::io iow;
2677	iow.set <myclass, &myclass::io_cb> (&obj);	4074	iow.set <myclass, &myclass::io_cb> (&obj);
2678		4075
		4076	=item w->set (object *)
		4077
		4078	This is a variation of a method callback - leaving out the method to call
		4079	will default the method to C<operator ()>, which makes it possible to use
		4080	functor objects without having to manually specify the C<operator ()> all
		4081	the time. Incidentally, you can then also leave out the template argument
		4082	list.
		4083
		4084	The C<operator ()> method prototype must be C<void operator ()(watcher &w,
		4085	int revents)>.
		4086
		4087	See the method-C<set> above for more details.
		4088
		4089	Example: use a functor object as callback.
		4090
		4091	struct myfunctor
		4092	{
		4093	void operator() (ev::io &w, int revents)
		4094	{
		4095	...
		4096	}
		4097	}
		4098
		4099	myfunctor f;
		4100
		4101	ev::io w;
		4102	w.set (&f);
		4103
2679	=item w->set<function> (void *data = 0)	4104	=item w->set<function> (void *data = 0)
2680		4105
2681	Also sets a callback, but uses a static method or plain function as	4106	Also sets a callback, but uses a static method or plain function as
2682	callback. The optional C<data> argument will be stored in the watcher's	4107	callback. The optional C<data> argument will be stored in the watcher's
2683	C<data> member and is free for you to use.	4108	C<data> member and is free for you to use.
…		…
2689	Example: Use a plain function as callback.	4114	Example: Use a plain function as callback.
2690		4115
2691	static void io_cb (ev::io &w, int revents) { }	4116	static void io_cb (ev::io &w, int revents) { }
2692	iow.set <io_cb> ();	4117	iow.set <io_cb> ();
2693		4118
2694	=item w->set (struct ev_loop *)	4119	=item w->set (loop)
2695		4120
2696	Associates a different C<struct ev_loop> with this watcher. You can only	4121	Associates a different C<struct ev_loop> with this watcher. You can only
2697	do this when the watcher is inactive (and not pending either).	4122	do this when the watcher is inactive (and not pending either).
2698		4123
2699	=item w->set ([arguments])	4124	=item w->set ([arguments])
2700		4125
2701	Basically the same as C<ev_TYPE_set>, with the same arguments. Must be	4126	Basically the same as C<ev_TYPE_set> (except for C<ev::embed> watchers>),
		4127	with the same arguments. Either this method or a suitable start method
2702	called at least once. Unlike the C counterpart, an active watcher gets	4128	must be called at least once. Unlike the C counterpart, an active watcher
2703	automatically stopped and restarted when reconfiguring it with this	4129	gets automatically stopped and restarted when reconfiguring it with this
2704	method.	4130	method.
		4131
		4132	For C<ev::embed> watchers this method is called C<set_embed>, to avoid
		4133	clashing with the C<set (loop)> method.
2705		4134
2706	=item w->start ()	4135	=item w->start ()
2707		4136
2708	Starts the watcher. Note that there is no C<loop> argument, as the	4137	Starts the watcher. Note that there is no C<loop> argument, as the
2709	constructor already stores the event loop.	4138	constructor already stores the event loop.
2710		4139
		4140	=item w->start ([arguments])
		4141
		4142	Instead of calling C<set> and C<start> methods separately, it is often
		4143	convenient to wrap them in one call. Uses the same type of arguments as
		4144	the configure C<set> method of the watcher.
		4145
2711	=item w->stop ()	4146	=item w->stop ()
2712		4147
2713	Stops the watcher if it is active. Again, no C<loop> argument.	4148	Stops the watcher if it is active. Again, no C<loop> argument.
2714		4149
2715	=item w->again () (C<ev::timer>, C<ev::periodic> only)	4150	=item w->again () (C<ev::timer>, C<ev::periodic> only)
…		…
2727		4162
2728	=back	4163	=back
2729		4164
2730	=back	4165	=back
2731		4166
2732	Example: Define a class with an IO and idle watcher, start one of them in	4167	Example: Define a class with two I/O and idle watchers, start the I/O
2733	the constructor.	4168	watchers in the constructor.
2734		4169
2735	class myclass	4170	class myclass
2736	{	4171	{
2737	ev::io io ; void io_cb (ev::io &w, int revents);	4172	ev::io io ; void io_cb (ev::io &w, int revents);
		4173	ev::io io2 ; void io2_cb (ev::io &w, int revents);
2738	ev::idle idle; void idle_cb (ev::idle &w, int revents);	4174	ev::idle idle; void idle_cb (ev::idle &w, int revents);
2739		4175
2740	myclass (int fd)	4176	myclass (int fd)
2741	{	4177	{
2742	io .set <myclass, &myclass::io_cb > (this);	4178	io .set <myclass, &myclass::io_cb > (this);
		4179	io2 .set <myclass, &myclass::io2_cb > (this);
2743	idle.set <myclass, &myclass::idle_cb> (this);	4180	idle.set <myclass, &myclass::idle_cb> (this);
2744		4181
2745	io.start (fd, ev::READ);	4182	io.set (fd, ev::WRITE); // configure the watcher
		4183	io.start (); // start it whenever convenient
		4184
		4185	io2.start (fd, ev::READ); // set + start in one call
2746	}	4186	}
2747	};	4187	};
2748		4188
2749		4189
2750	=head1 OTHER LANGUAGE BINDINGS	4190	=head1 OTHER LANGUAGE BINDINGS
…		…
2769	L<http://software.schmorp.de/pkg/EV>.	4209	L<http://software.schmorp.de/pkg/EV>.
2770		4210
2771	=item Python	4211	=item Python
2772		4212
2773	Python bindings can be found at L<http://code.google.com/p/pyev/>. It	4213	Python bindings can be found at L<http://code.google.com/p/pyev/>. It
2774	seems to be quite complete and well-documented. Note, however, that the	4214	seems to be quite complete and well-documented.
2775	patch they require for libev is outright dangerous as it breaks the ABI
2776	for everybody else, and therefore, should never be applied in an installed
2777	libev (if python requires an incompatible ABI then it needs to embed
2778	libev).
2779		4215
2780	=item Ruby	4216	=item Ruby
2781		4217
2782	Tony Arcieri has written a ruby extension that offers access to a subset	4218	Tony Arcieri has written a ruby extension that offers access to a subset
2783	of the libev API and adds file handle abstractions, asynchronous DNS and	4219	of the libev API and adds file handle abstractions, asynchronous DNS and
2784	more on top of it. It can be found via gem servers. Its homepage is at	4220	more on top of it. It can be found via gem servers. Its homepage is at
2785	L<http://rev.rubyforge.org/>.	4221	L<http://rev.rubyforge.org/>.
2786		4222
		4223	Roger Pack reports that using the link order C<-lws2_32 -lmsvcrt-ruby-190>
		4224	makes rev work even on mingw.
		4225
		4226	=item Haskell
		4227
		4228	A haskell binding to libev is available at
		4229	L<http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hlibev>.
		4230
2787	=item D	4231	=item D
2788		4232
2789	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to	4233	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
2790	be found at L<http://proj.llucax.com.ar/wiki/evd>.	4234	be found at L<http://www.llucax.com.ar/proj/ev.d/index.html>.
		4235
		4236	=item Ocaml
		4237
		4238	Erkki Seppala has written Ocaml bindings for libev, to be found at
		4239	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.
		4240
		4241	=item Lua
		4242
		4243	Brian Maher has written a partial interface to libev for lua (at the
		4244	time of this writing, only C<ev_io> and C<ev_timer>), to be found at
		4245	L<http://github.com/brimworks/lua-ev>.
		4246
		4247	=item Javascript
		4248
		4249	Node.js (L<http://nodejs.org>) uses libev as the underlying event library.
		4250
		4251	=item Others
		4252
		4253	There are others, and I stopped counting.
2791		4254
2792	=back	4255	=back
2793		4256
2794		4257
2795	=head1 MACRO MAGIC	4258	=head1 MACRO MAGIC
…		…
2809	loop argument"). The C<EV_A> form is used when this is the sole argument,	4272	loop argument"). The C<EV_A> form is used when this is the sole argument,
2810	C<EV_A_> is used when other arguments are following. Example:	4273	C<EV_A_> is used when other arguments are following. Example:
2811		4274
2812	ev_unref (EV_A);	4275	ev_unref (EV_A);
2813	ev_timer_add (EV_A_ watcher);	4276	ev_timer_add (EV_A_ watcher);
2814	ev_loop (EV_A_ 0);	4277	ev_run (EV_A_ 0);
2815		4278
2816	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,	4279	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
2817	which is often provided by the following macro.	4280	which is often provided by the following macro.
2818		4281
2819	=item C<EV_P>, C<EV_P_>	4282	=item C<EV_P>, C<EV_P_>
…		…
2832	suitable for use with C<EV_A>.	4295	suitable for use with C<EV_A>.
2833		4296
2834	=item C<EV_DEFAULT>, C<EV_DEFAULT_>	4297	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
2835		4298
2836	Similar to the other two macros, this gives you the value of the default	4299	Similar to the other two macros, this gives you the value of the default
2837	loop, if multiple loops are supported ("ev loop default").	4300	loop, if multiple loops are supported ("ev loop default"). The default loop
		4301	will be initialised if it isn't already initialised.
		4302
		4303	For non-multiplicity builds, these macros do nothing, so you always have
		4304	to initialise the loop somewhere.
2838		4305
2839	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>	4306	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
2840		4307
2841	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the	4308	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
2842	default loop has been initialised (C<UC> == unchecked). Their behaviour	4309	default loop has been initialised (C<UC> == unchecked). Their behaviour
…		…
2859	}	4326	}
2860		4327
2861	ev_check check;	4328	ev_check check;
2862	ev_check_init (&check, check_cb);	4329	ev_check_init (&check, check_cb);
2863	ev_check_start (EV_DEFAULT_ &check);	4330	ev_check_start (EV_DEFAULT_ &check);
2864	ev_loop (EV_DEFAULT_ 0);	4331	ev_run (EV_DEFAULT_ 0);
2865		4332
2866	=head1 EMBEDDING	4333	=head1 EMBEDDING
2867		4334
2868	Libev can (and often is) directly embedded into host	4335	Libev can (and often is) directly embedded into host
2869	applications. Examples of applications that embed it include the Deliantra	4336	applications. Examples of applications that embed it include the Deliantra
…		…
2896		4363
2897	#define EV_STANDALONE 1	4364	#define EV_STANDALONE 1
2898	#include "ev.h"	4365	#include "ev.h"
2899		4366
2900	Both header files and implementation files can be compiled with a C++	4367	Both header files and implementation files can be compiled with a C++
2901	compiler (at least, thats a stated goal, and breakage will be treated	4368	compiler (at least, that's a stated goal, and breakage will be treated
2902	as a bug).	4369	as a bug).
2903		4370
2904	You need the following files in your source tree, or in a directory	4371	You need the following files in your source tree, or in a directory
2905	in your include path (e.g. in libev/ when using -Ilibev):	4372	in your include path (e.g. in libev/ when using -Ilibev):
2906		4373
…		…
2949	libev.m4	4416	libev.m4
2950		4417
2951	=head2 PREPROCESSOR SYMBOLS/MACROS	4418	=head2 PREPROCESSOR SYMBOLS/MACROS
2952		4419
2953	Libev can be configured via a variety of preprocessor symbols you have to	4420	Libev can be configured via a variety of preprocessor symbols you have to
2954	define before including any of its files. The default in the absence of	4421	define before including (or compiling) any of its files. The default in
2955	autoconf is documented for every option.	4422	the absence of autoconf is documented for every option.
		4423
		4424	Symbols marked with "(h)" do not change the ABI, and can have different
		4425	values when compiling libev vs. including F<ev.h>, so it is permissible
		4426	to redefine them before including F<ev.h> without breaking compatibility
		4427	to a compiled library. All other symbols change the ABI, which means all
		4428	users of libev and the libev code itself must be compiled with compatible
		4429	settings.
2956		4430
2957	=over 4	4431	=over 4
2958		4432
		4433	=item EV_COMPAT3 (h)
		4434
		4435	Backwards compatibility is a major concern for libev. This is why this
		4436	release of libev comes with wrappers for the functions and symbols that
		4437	have been renamed between libev version 3 and 4.
		4438
		4439	You can disable these wrappers (to test compatibility with future
		4440	versions) by defining C<EV_COMPAT3> to C<0> when compiling your
		4441	sources. This has the additional advantage that you can drop the C<struct>
		4442	from C<struct ev_loop> declarations, as libev will provide an C<ev_loop>
		4443	typedef in that case.
		4444
		4445	In some future version, the default for C<EV_COMPAT3> will become C<0>,
		4446	and in some even more future version the compatibility code will be
		4447	removed completely.
		4448
2959	=item EV_STANDALONE	4449	=item EV_STANDALONE (h)
2960		4450
2961	Must always be C<1> if you do not use autoconf configuration, which	4451	Must always be C<1> if you do not use autoconf configuration, which
2962	keeps libev from including F<config.h>, and it also defines dummy	4452	keeps libev from including F<config.h>, and it also defines dummy
2963	implementations for some libevent functions (such as logging, which is not	4453	implementations for some libevent functions (such as logging, which is not
2964	supported). It will also not define any of the structs usually found in	4454	supported). It will also not define any of the structs usually found in
2965	F<event.h> that are not directly supported by the libev core alone.	4455	F<event.h> that are not directly supported by the libev core alone.
2966		4456
		4457	In standalone mode, libev will still try to automatically deduce the
		4458	configuration, but has to be more conservative.
		4459
		4460	=item EV_USE_FLOOR
		4461
		4462	If defined to be C<1>, libev will use the C<floor ()> function for its
		4463	periodic reschedule calculations, otherwise libev will fall back on a
		4464	portable (slower) implementation. If you enable this, you usually have to
		4465	link against libm or something equivalent. Enabling this when the C<floor>
		4466	function is not available will fail, so the safe default is to not enable
		4467	this.
		4468
2967	=item EV_USE_MONOTONIC	4469	=item EV_USE_MONOTONIC
2968		4470
2969	If defined to be C<1>, libev will try to detect the availability of the	4471	If defined to be C<1>, libev will try to detect the availability of the
2970	monotonic clock option at both compile time and runtime. Otherwise no use	4472	monotonic clock option at both compile time and runtime. Otherwise no
2971	of the monotonic clock option will be attempted. If you enable this, you	4473	use of the monotonic clock option will be attempted. If you enable this,
2972	usually have to link against librt or something similar. Enabling it when	4474	you usually have to link against librt or something similar. Enabling it
2973	the functionality isn't available is safe, though, although you have	4475	when the functionality isn't available is safe, though, although you have
2974	to make sure you link against any libraries where the C<clock_gettime>	4476	to make sure you link against any libraries where the C<clock_gettime>
2975	function is hiding in (often F<-lrt>).	4477	function is hiding in (often F<-lrt>). See also C<EV_USE_CLOCK_SYSCALL>.
2976		4478
2977	=item EV_USE_REALTIME	4479	=item EV_USE_REALTIME
2978		4480
2979	If defined to be C<1>, libev will try to detect the availability of the	4481	If defined to be C<1>, libev will try to detect the availability of the
2980	real-time clock option at compile time (and assume its availability at	4482	real-time clock option at compile time (and assume its availability
2981	runtime if successful). Otherwise no use of the real-time clock option will	4483	at runtime if successful). Otherwise no use of the real-time clock
2982	be attempted. This effectively replaces C<gettimeofday> by C<clock_get	4484	option will be attempted. This effectively replaces C<gettimeofday>
2983	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See the	4485	by C<clock_get (CLOCK_REALTIME, ...)> and will not normally affect
2984	note about libraries in the description of C<EV_USE_MONOTONIC>, though.	4486	correctness. See the note about libraries in the description of
		4487	C<EV_USE_MONOTONIC>, though. Defaults to the opposite value of
		4488	C<EV_USE_CLOCK_SYSCALL>.
		4489
		4490	=item EV_USE_CLOCK_SYSCALL
		4491
		4492	If defined to be C<1>, libev will try to use a direct syscall instead
		4493	of calling the system-provided C<clock_gettime> function. This option
		4494	exists because on GNU/Linux, C<clock_gettime> is in C<librt>, but C<librt>
		4495	unconditionally pulls in C<libpthread>, slowing down single-threaded
		4496	programs needlessly. Using a direct syscall is slightly slower (in
		4497	theory), because no optimised vdso implementation can be used, but avoids
		4498	the pthread dependency. Defaults to C<1> on GNU/Linux with glibc 2.x or
		4499	higher, as it simplifies linking (no need for C<-lrt>).
2985		4500
2986	=item EV_USE_NANOSLEEP	4501	=item EV_USE_NANOSLEEP
2987		4502
2988	If defined to be C<1>, libev will assume that C<nanosleep ()> is available	4503	If defined to be C<1>, libev will assume that C<nanosleep ()> is available
2989	and will use it for delays. Otherwise it will use C<select ()>.	4504	and will use it for delays. Otherwise it will use C<select ()>.
…		…
3005		4520
3006	=item EV_SELECT_USE_FD_SET	4521	=item EV_SELECT_USE_FD_SET
3007		4522
3008	If defined to C<1>, then the select backend will use the system C<fd_set>	4523	If defined to C<1>, then the select backend will use the system C<fd_set>
3009	structure. This is useful if libev doesn't compile due to a missing	4524	structure. This is useful if libev doesn't compile due to a missing
3010	C<NFDBITS> or C<fd_mask> definition or it mis-guesses the bitset layout on	4525	C<NFDBITS> or C<fd_mask> definition or it mis-guesses the bitset layout
3011	exotic systems. This usually limits the range of file descriptors to some	4526	on exotic systems. This usually limits the range of file descriptors to
3012	low limit such as 1024 or might have other limitations (winsocket only	4527	some low limit such as 1024 or might have other limitations (winsocket
3013	allows 64 sockets). The C<FD_SETSIZE> macro, set before compilation, might	4528	only allows 64 sockets). The C<FD_SETSIZE> macro, set before compilation,
3014	influence the size of the C<fd_set> used.	4529	configures the maximum size of the C<fd_set>.
3015		4530
3016	=item EV_SELECT_IS_WINSOCKET	4531	=item EV_SELECT_IS_WINSOCKET
3017		4532
3018	When defined to C<1>, the select backend will assume that	4533	When defined to C<1>, the select backend will assume that
3019	select/socket/connect etc. don't understand file descriptors but	4534	select/socket/connect etc. don't understand file descriptors but
…		…
3021	be used is the winsock select). This means that it will call	4536	be used is the winsock select). This means that it will call
3022	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	4537	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
3023	it is assumed that all these functions actually work on fds, even	4538	it is assumed that all these functions actually work on fds, even
3024	on win32. Should not be defined on non-win32 platforms.	4539	on win32. Should not be defined on non-win32 platforms.
3025		4540
3026	=item EV_FD_TO_WIN32_HANDLE	4541	=item EV_FD_TO_WIN32_HANDLE(fd)
3027		4542
3028	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map	4543	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
3029	file descriptors to socket handles. When not defining this symbol (the	4544	file descriptors to socket handles. When not defining this symbol (the
3030	default), then libev will call C<_get_osfhandle>, which is usually	4545	default), then libev will call C<_get_osfhandle>, which is usually
3031	correct. In some cases, programs use their own file descriptor management,	4546	correct. In some cases, programs use their own file descriptor management,
3032	in which case they can provide this function to map fds to socket handles.	4547	in which case they can provide this function to map fds to socket handles.
		4548
		4549	=item EV_WIN32_HANDLE_TO_FD(handle)
		4550
		4551	If C<EV_SELECT_IS_WINSOCKET> then libev maps handles to file descriptors
		4552	using the standard C<_open_osfhandle> function. For programs implementing
		4553	their own fd to handle mapping, overwriting this function makes it easier
		4554	to do so. This can be done by defining this macro to an appropriate value.
		4555
		4556	=item EV_WIN32_CLOSE_FD(fd)
		4557
		4558	If programs implement their own fd to handle mapping on win32, then this
		4559	macro can be used to override the C<close> function, useful to unregister
		4560	file descriptors again. Note that the replacement function has to close
		4561	the underlying OS handle.
		4562
		4563	=item EV_USE_WSASOCKET
		4564
		4565	If defined to be C<1>, libev will use C<WSASocket> to create its internal
		4566	communication socket, which works better in some environments. Otherwise,
		4567	the normal C<socket> function will be used, which works better in other
		4568	environments.
3033		4569
3034	=item EV_USE_POLL	4570	=item EV_USE_POLL
3035		4571
3036	If defined to be C<1>, libev will compile in support for the C<poll>(2)	4572	If defined to be C<1>, libev will compile in support for the C<poll>(2)
3037	backend. Otherwise it will be enabled on non-win32 platforms. It	4573	backend. Otherwise it will be enabled on non-win32 platforms. It
…		…
3073	If defined to be C<1>, libev will compile in support for the Linux inotify	4609	If defined to be C<1>, libev will compile in support for the Linux inotify
3074	interface to speed up C<ev_stat> watchers. Its actual availability will	4610	interface to speed up C<ev_stat> watchers. Its actual availability will
3075	be detected at runtime. If undefined, it will be enabled if the headers	4611	be detected at runtime. If undefined, it will be enabled if the headers
3076	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.	4612	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
3077		4613
		4614	=item EV_NO_SMP
		4615
		4616	If defined to be C<1>, libev will assume that memory is always coherent
		4617	between threads, that is, threads can be used, but threads never run on
		4618	different cpus (or different cpu cores). This reduces dependencies
		4619	and makes libev faster.
		4620
		4621	=item EV_NO_THREADS
		4622
		4623	If defined to be C<1>, libev will assume that it will never be called from
		4624	different threads (that includes signal handlers), which is a stronger
		4625	assumption than C<EV_NO_SMP>, above. This reduces dependencies and makes
		4626	libev faster.
		4627
3078	=item EV_ATOMIC_T	4628	=item EV_ATOMIC_T
3079		4629
3080	Libev requires an integer type (suitable for storing C<0> or C<1>) whose	4630	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
3081	access is atomic with respect to other threads or signal contexts. No such	4631	access is atomic with respect to other threads or signal contexts. No
3082	type is easily found in the C language, so you can provide your own type	4632	such type is easily found in the C language, so you can provide your own
3083	that you know is safe for your purposes. It is used both for signal handler "locking"	4633	type that you know is safe for your purposes. It is used both for signal
3084	as well as for signal and thread safety in C<ev_async> watchers.	4634	handler "locking" as well as for signal and thread safety in C<ev_async>
		4635	watchers.
3085		4636
3086	In the absence of this define, libev will use C<sig_atomic_t volatile>	4637	In the absence of this define, libev will use C<sig_atomic_t volatile>
3087	(from F<signal.h>), which is usually good enough on most platforms.	4638	(from F<signal.h>), which is usually good enough on most platforms.
3088		4639
3089	=item EV_H	4640	=item EV_H (h)
3090		4641
3091	The name of the F<ev.h> header file used to include it. The default if	4642	The name of the F<ev.h> header file used to include it. The default if
3092	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be	4643	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
3093	used to virtually rename the F<ev.h> header file in case of conflicts.	4644	used to virtually rename the F<ev.h> header file in case of conflicts.
3094		4645
3095	=item EV_CONFIG_H	4646	=item EV_CONFIG_H (h)
3096		4647
3097	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	4648	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
3098	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	4649	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
3099	C<EV_H>, above.	4650	C<EV_H>, above.
3100		4651
3101	=item EV_EVENT_H	4652	=item EV_EVENT_H (h)
3102		4653
3103	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	4654	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
3104	of how the F<event.h> header can be found, the default is C<"event.h">.	4655	of how the F<event.h> header can be found, the default is C<"event.h">.
3105		4656
3106	=item EV_PROTOTYPES	4657	=item EV_PROTOTYPES (h)
3107		4658
3108	If defined to be C<0>, then F<ev.h> will not define any function	4659	If defined to be C<0>, then F<ev.h> will not define any function
3109	prototypes, but still define all the structs and other symbols. This is	4660	prototypes, but still define all the structs and other symbols. This is
3110	occasionally useful if you want to provide your own wrapper functions	4661	occasionally useful if you want to provide your own wrapper functions
3111	around libev functions.	4662	around libev functions.
…		…
3116	will have the C<struct ev_loop *> as first argument, and you can create	4667	will have the C<struct ev_loop *> as first argument, and you can create
3117	additional independent event loops. Otherwise there will be no support	4668	additional independent event loops. Otherwise there will be no support
3118	for multiple event loops and there is no first event loop pointer	4669	for multiple event loops and there is no first event loop pointer
3119	argument. Instead, all functions act on the single default loop.	4670	argument. Instead, all functions act on the single default loop.
3120		4671
		4672	Note that C<EV_DEFAULT> and C<EV_DEFAULT_> will no longer provide a
		4673	default loop when multiplicity is switched off - you always have to
		4674	initialise the loop manually in this case.
		4675
3121	=item EV_MINPRI	4676	=item EV_MINPRI
3122		4677
3123	=item EV_MAXPRI	4678	=item EV_MAXPRI
3124		4679
3125	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to	4680	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to
…		…
3133	fine.	4688	fine.
3134		4689
3135	If your embedding application does not need any priorities, defining these	4690	If your embedding application does not need any priorities, defining these
3136	both to C<0> will save some memory and CPU.	4691	both to C<0> will save some memory and CPU.
3137		4692
3138	=item EV_PERIODIC_ENABLE	4693	=item EV_PERIODIC_ENABLE, EV_IDLE_ENABLE, EV_EMBED_ENABLE, EV_STAT_ENABLE,
		4694	EV_PREPARE_ENABLE, EV_CHECK_ENABLE, EV_FORK_ENABLE, EV_SIGNAL_ENABLE,
		4695	EV_ASYNC_ENABLE, EV_CHILD_ENABLE.
3139		4696
3140	If undefined or defined to be C<1>, then periodic timers are supported. If	4697	If undefined or defined to be C<1> (and the platform supports it), then
3141	defined to be C<0>, then they are not. Disabling them saves a few kB of	4698	the respective watcher type is supported. If defined to be C<0>, then it
3142	code.	4699	is not. Disabling watcher types mainly saves code size.
3143		4700
3144	=item EV_IDLE_ENABLE	4701	=item EV_FEATURES
3145
3146	If undefined or defined to be C<1>, then idle watchers are supported. If
3147	defined to be C<0>, then they are not. Disabling them saves a few kB of
3148	code.
3149
3150	=item EV_EMBED_ENABLE
3151
3152	If undefined or defined to be C<1>, then embed watchers are supported. If
3153	defined to be C<0>, then they are not. Embed watchers rely on most other
3154	watcher types, which therefore must not be disabled.
3155
3156	=item EV_STAT_ENABLE
3157
3158	If undefined or defined to be C<1>, then stat watchers are supported. If
3159	defined to be C<0>, then they are not.
3160
3161	=item EV_FORK_ENABLE
3162
3163	If undefined or defined to be C<1>, then fork watchers are supported. If
3164	defined to be C<0>, then they are not.
3165
3166	=item EV_ASYNC_ENABLE
3167
3168	If undefined or defined to be C<1>, then async watchers are supported. If
3169	defined to be C<0>, then they are not.
3170
3171	=item EV_MINIMAL
3172		4702
3173	If you need to shave off some kilobytes of code at the expense of some	4703	If you need to shave off some kilobytes of code at the expense of some
3174	speed, define this symbol to C<1>. Currently this is used to override some	4704	speed (but with the full API), you can define this symbol to request
3175	inlining decisions, saves roughly 30% code size on amd64. It also selects a	4705	certain subsets of functionality. The default is to enable all features
3176	much smaller 2-heap for timer management over the default 4-heap.	4706	that can be enabled on the platform.
		4707
		4708	A typical way to use this symbol is to define it to C<0> (or to a bitset
		4709	with some broad features you want) and then selectively re-enable
		4710	additional parts you want, for example if you want everything minimal,
		4711	but multiple event loop support, async and child watchers and the poll
		4712	backend, use this:
		4713
		4714	#define EV_FEATURES 0
		4715	#define EV_MULTIPLICITY 1
		4716	#define EV_USE_POLL 1
		4717	#define EV_CHILD_ENABLE 1
		4718	#define EV_ASYNC_ENABLE 1
		4719
		4720	The actual value is a bitset, it can be a combination of the following
		4721	values (by default, all of these are enabled):
		4722
		4723	=over 4
		4724
		4725	=item C<1> - faster/larger code
		4726
		4727	Use larger code to speed up some operations.
		4728
		4729	Currently this is used to override some inlining decisions (enlarging the
		4730	code size by roughly 30% on amd64).
		4731
		4732	When optimising for size, use of compiler flags such as C<-Os> with
		4733	gcc is recommended, as well as C<-DNDEBUG>, as libev contains a number of
		4734	assertions.
		4735
		4736	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4737	(e.g. gcc with C<-Os>).
		4738
		4739	=item C<2> - faster/larger data structures
		4740
		4741	Replaces the small 2-heap for timer management by a faster 4-heap, larger
		4742	hash table sizes and so on. This will usually further increase code size
		4743	and can additionally have an effect on the size of data structures at
		4744	runtime.
		4745
		4746	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4747	(e.g. gcc with C<-Os>).
		4748
		4749	=item C<4> - full API configuration
		4750
		4751	This enables priorities (sets C<EV_MAXPRI>=2 and C<EV_MINPRI>=-2), and
		4752	enables multiplicity (C<EV_MULTIPLICITY>=1).
		4753
		4754	=item C<8> - full API
		4755
		4756	This enables a lot of the "lesser used" API functions. See C<ev.h> for
		4757	details on which parts of the API are still available without this
		4758	feature, and do not complain if this subset changes over time.
		4759
		4760	=item C<16> - enable all optional watcher types
		4761
		4762	Enables all optional watcher types. If you want to selectively enable
		4763	only some watcher types other than I/O and timers (e.g. prepare,
		4764	embed, async, child...) you can enable them manually by defining
		4765	C<EV_watchertype_ENABLE> to C<1> instead.
		4766
		4767	=item C<32> - enable all backends
		4768
		4769	This enables all backends - without this feature, you need to enable at
		4770	least one backend manually (C<EV_USE_SELECT> is a good choice).
		4771
		4772	=item C<64> - enable OS-specific "helper" APIs
		4773
		4774	Enable inotify, eventfd, signalfd and similar OS-specific helper APIs by
		4775	default.
		4776
		4777	=back
		4778
		4779	Compiling with C<gcc -Os -DEV_STANDALONE -DEV_USE_EPOLL=1 -DEV_FEATURES=0>
		4780	reduces the compiled size of libev from 24.7Kb code/2.8Kb data to 6.5Kb
		4781	code/0.3Kb data on my GNU/Linux amd64 system, while still giving you I/O
		4782	watchers, timers and monotonic clock support.
		4783
		4784	With an intelligent-enough linker (gcc+binutils are intelligent enough
		4785	when you use C<-Wl,--gc-sections -ffunction-sections>) functions unused by
		4786	your program might be left out as well - a binary starting a timer and an
		4787	I/O watcher then might come out at only 5Kb.
		4788
		4789	=item EV_API_STATIC
		4790
		4791	If this symbol is defined (by default it is not), then all identifiers
		4792	will have static linkage. This means that libev will not export any
		4793	identifiers, and you cannot link against libev anymore. This can be useful
		4794	when you embed libev, only want to use libev functions in a single file,
		4795	and do not want its identifiers to be visible.
		4796
		4797	To use this, define C<EV_API_STATIC> and include F<ev.c> in the file that
		4798	wants to use libev.
		4799
		4800	This option only works when libev is compiled with a C compiler, as C++
		4801	doesn't support the required declaration syntax.
		4802
		4803	=item EV_AVOID_STDIO
		4804
		4805	If this is set to C<1> at compiletime, then libev will avoid using stdio
		4806	functions (printf, scanf, perror etc.). This will increase the code size
		4807	somewhat, but if your program doesn't otherwise depend on stdio and your
		4808	libc allows it, this avoids linking in the stdio library which is quite
		4809	big.
		4810
		4811	Note that error messages might become less precise when this option is
		4812	enabled.
		4813
		4814	=item EV_NSIG
		4815
		4816	The highest supported signal number, +1 (or, the number of
		4817	signals): Normally, libev tries to deduce the maximum number of signals
		4818	automatically, but sometimes this fails, in which case it can be
		4819	specified. Also, using a lower number than detected (C<32> should be
		4820	good for about any system in existence) can save some memory, as libev
		4821	statically allocates some 12-24 bytes per signal number.
3177		4822
3178	=item EV_PID_HASHSIZE	4823	=item EV_PID_HASHSIZE
3179		4824
3180	C<ev_child> watchers use a small hash table to distribute workload by	4825	C<ev_child> watchers use a small hash table to distribute workload by
3181	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	4826	pid. The default size is C<16> (or C<1> with C<EV_FEATURES> disabled),
3182	than enough. If you need to manage thousands of children you might want to	4827	usually more than enough. If you need to manage thousands of children you
3183	increase this value (I<must> be a power of two).	4828	might want to increase this value (I<must> be a power of two).
3184		4829
3185	=item EV_INOTIFY_HASHSIZE	4830	=item EV_INOTIFY_HASHSIZE
3186		4831
3187	C<ev_stat> watchers use a small hash table to distribute workload by	4832	C<ev_stat> watchers use a small hash table to distribute workload by
3188	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	4833	inotify watch id. The default size is C<16> (or C<1> with C<EV_FEATURES>
3189	usually more than enough. If you need to manage thousands of C<ev_stat>	4834	disabled), usually more than enough. If you need to manage thousands of
3190	watchers you might want to increase this value (I<must> be a power of	4835	C<ev_stat> watchers you might want to increase this value (I<must> be a
3191	two).	4836	power of two).
3192		4837
3193	=item EV_USE_4HEAP	4838	=item EV_USE_4HEAP
3194		4839
3195	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4840	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3196	timer and periodics heaps, libev uses a 4-heap when this symbol is defined	4841	timer and periodics heaps, libev uses a 4-heap when this symbol is defined
3197	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably	4842	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably
3198	faster performance with many (thousands) of watchers.	4843	faster performance with many (thousands) of watchers.
3199		4844
3200	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4845	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3201	(disabled).	4846	will be C<0>.
3202		4847
3203	=item EV_HEAP_CACHE_AT	4848	=item EV_HEAP_CACHE_AT
3204		4849
3205	Heaps are not very cache-efficient. To improve the cache-efficiency of the	4850	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3206	timer and periodics heaps, libev can cache the timestamp (I<at>) within	4851	timer and periodics heaps, libev can cache the timestamp (I<at>) within
3207	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),	4852	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
3208	which uses 8-12 bytes more per watcher and a few hundred bytes more code,	4853	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
3209	but avoids random read accesses on heap changes. This improves performance	4854	but avoids random read accesses on heap changes. This improves performance
3210	noticeably with many (hundreds) of watchers.	4855	noticeably with many (hundreds) of watchers.
3211		4856
3212	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	4857	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3213	(disabled).	4858	will be C<0>.
3214		4859
3215	=item EV_VERIFY	4860	=item EV_VERIFY
3216		4861
3217	Controls how much internal verification (see C<ev_loop_verify ()>) will	4862	Controls how much internal verification (see C<ev_verify ()>) will
3218	be done: If set to C<0>, no internal verification code will be compiled	4863	be done: If set to C<0>, no internal verification code will be compiled
3219	in. If set to C<1>, then verification code will be compiled in, but not	4864	in. If set to C<1>, then verification code will be compiled in, but not
3220	called. If set to C<2>, then the internal verification code will be	4865	called. If set to C<2>, then the internal verification code will be
3221	called once per loop, which can slow down libev. If set to C<3>, then the	4866	called once per loop, which can slow down libev. If set to C<3>, then the
3222	verification code will be called very frequently, which will slow down	4867	verification code will be called very frequently, which will slow down
3223	libev considerably.	4868	libev considerably.
3224		4869
3225	The default is C<1>, unless C<EV_MINIMAL> is set, in which case it will be	4870	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3226	C<0>.	4871	will be C<0>.
3227		4872
3228	=item EV_COMMON	4873	=item EV_COMMON
3229		4874
3230	By default, all watchers have a C<void *data> member. By redefining	4875	By default, all watchers have a C<void *data> member. By redefining
3231	this macro to a something else you can include more and other types of	4876	this macro to something else you can include more and other types of
3232	members. You have to define it each time you include one of the files,	4877	members. You have to define it each time you include one of the files,
3233	though, and it must be identical each time.	4878	though, and it must be identical each time.
3234		4879
3235	For example, the perl EV module uses something like this:	4880	For example, the perl EV module uses something like this:
3236		4881
…		…
3289	file.	4934	file.
3290		4935
3291	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	4936	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
3292	that everybody includes and which overrides some configure choices:	4937	that everybody includes and which overrides some configure choices:
3293		4938
3294	#define EV_MINIMAL 1	4939	#define EV_FEATURES 8
3295	#define EV_USE_POLL 0	4940	#define EV_USE_SELECT 1
3296	#define EV_MULTIPLICITY 0
3297	#define EV_PERIODIC_ENABLE 0	4941	#define EV_PREPARE_ENABLE 1
		4942	#define EV_IDLE_ENABLE 1
3298	#define EV_STAT_ENABLE 0	4943	#define EV_SIGNAL_ENABLE 1
3299	#define EV_FORK_ENABLE 0	4944	#define EV_CHILD_ENABLE 1
		4945	#define EV_USE_STDEXCEPT 0
3300	#define EV_CONFIG_H <config.h>	4946	#define EV_CONFIG_H <config.h>
3301	#define EV_MINPRI 0
3302	#define EV_MAXPRI 0
3303		4947
3304	#include "ev++.h"	4948	#include "ev++.h"
3305		4949
3306	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	4950	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
3307		4951
3308	#include "ev_cpp.h"	4952	#include "ev_cpp.h"
3309	#include "ev.c"	4953	#include "ev.c"
3310		4954
3311	=head1 INTERACTION WITH OTHER PROGRAMS OR LIBRARIES	4955	=head1 INTERACTION WITH OTHER PROGRAMS, LIBRARIES OR THE ENVIRONMENT
3312		4956
3313	=head2 THREADS AND COROUTINES	4957	=head2 THREADS AND COROUTINES
3314		4958
3315	=head3 THREADS	4959	=head3 THREADS
3316		4960
…		…
3367	default loop and triggering an C<ev_async> watcher from the default loop	5011	default loop and triggering an C<ev_async> watcher from the default loop
3368	watcher callback into the event loop interested in the signal.	5012	watcher callback into the event loop interested in the signal.
3369		5013
3370	=back	5014	=back
3371		5015
		5016	See also L</THREAD LOCKING EXAMPLE>.
		5017
3372	=head3 COROUTINES	5018	=head3 COROUTINES
3373		5019
3374	Libev is very accommodating to coroutines ("cooperative threads"):	5020	Libev is very accommodating to coroutines ("cooperative threads"):
3375	libev fully supports nesting calls to its functions from different	5021	libev fully supports nesting calls to its functions from different
3376	coroutines (e.g. you can call C<ev_loop> on the same loop from two	5022	coroutines (e.g. you can call C<ev_run> on the same loop from two
3377	different coroutines, and switch freely between both coroutines running the	5023	different coroutines, and switch freely between both coroutines running
3378	loop, as long as you don't confuse yourself). The only exception is that	5024	the loop, as long as you don't confuse yourself). The only exception is
3379	you must not do this from C<ev_periodic> reschedule callbacks.	5025	that you must not do this from C<ev_periodic> reschedule callbacks.
3380		5026
3381	Care has been taken to ensure that libev does not keep local state inside	5027	Care has been taken to ensure that libev does not keep local state inside
3382	C<ev_loop>, and other calls do not usually allow for coroutine switches as	5028	C<ev_run>, and other calls do not usually allow for coroutine switches as
3383	they do not clal any callbacks.	5029	they do not call any callbacks.
3384		5030
3385	=head2 COMPILER WARNINGS	5031	=head2 COMPILER WARNINGS
3386		5032
3387	Depending on your compiler and compiler settings, you might get no or a	5033	Depending on your compiler and compiler settings, you might get no or a
3388	lot of warnings when compiling libev code. Some people are apparently	5034	lot of warnings when compiling libev code. Some people are apparently
…		…
3398	maintainable.	5044	maintainable.
3399		5045
3400	And of course, some compiler warnings are just plain stupid, or simply	5046	And of course, some compiler warnings are just plain stupid, or simply
3401	wrong (because they don't actually warn about the condition their message	5047	wrong (because they don't actually warn about the condition their message
3402	seems to warn about). For example, certain older gcc versions had some	5048	seems to warn about). For example, certain older gcc versions had some
3403	warnings that resulted an extreme number of false positives. These have	5049	warnings that resulted in an extreme number of false positives. These have
3404	been fixed, but some people still insist on making code warn-free with	5050	been fixed, but some people still insist on making code warn-free with
3405	such buggy versions.	5051	such buggy versions.
3406		5052
3407	While libev is written to generate as few warnings as possible,	5053	While libev is written to generate as few warnings as possible,
3408	"warn-free" code is not a goal, and it is recommended not to build libev	5054	"warn-free" code is not a goal, and it is recommended not to build libev
…		…
3422	==2274== definitely lost: 0 bytes in 0 blocks.	5068	==2274== definitely lost: 0 bytes in 0 blocks.
3423	==2274== possibly lost: 0 bytes in 0 blocks.	5069	==2274== possibly lost: 0 bytes in 0 blocks.
3424	==2274== still reachable: 256 bytes in 1 blocks.	5070	==2274== still reachable: 256 bytes in 1 blocks.
3425		5071
3426	Then there is no memory leak, just as memory accounted to global variables	5072	Then there is no memory leak, just as memory accounted to global variables
3427	is not a memleak - the memory is still being refernced, and didn't leak.	5073	is not a memleak - the memory is still being referenced, and didn't leak.
3428		5074
3429	Similarly, under some circumstances, valgrind might report kernel bugs	5075	Similarly, under some circumstances, valgrind might report kernel bugs
3430	as if it were a bug in libev (e.g. in realloc or in the poll backend,	5076	as if it were a bug in libev (e.g. in realloc or in the poll backend,
3431	although an acceptable workaround has been found here), or it might be	5077	although an acceptable workaround has been found here), or it might be
3432	confused.	5078	confused.
…		…
3444	I suggest using suppression lists.	5090	I suggest using suppression lists.
3445		5091
3446		5092
3447	=head1 PORTABILITY NOTES	5093	=head1 PORTABILITY NOTES
3448		5094
		5095	=head2 GNU/LINUX 32 BIT LIMITATIONS
		5096
		5097	GNU/Linux is the only common platform that supports 64 bit file/large file
		5098	interfaces but I<disables> them by default.
		5099
		5100	That means that libev compiled in the default environment doesn't support
		5101	files larger than 2GiB or so, which mainly affects C<ev_stat> watchers.
		5102
		5103	Unfortunately, many programs try to work around this GNU/Linux issue
		5104	by enabling the large file API, which makes them incompatible with the
		5105	standard libev compiled for their system.
		5106
		5107	Likewise, libev cannot enable the large file API itself as this would
		5108	suddenly make it incompatible to the default compile time environment,
		5109	i.e. all programs not using special compile switches.
		5110
		5111	=head2 OS/X AND DARWIN BUGS
		5112
		5113	The whole thing is a bug if you ask me - basically any system interface
		5114	you touch is broken, whether it is locales, poll, kqueue or even the
		5115	OpenGL drivers.
		5116
		5117	=head3 C<kqueue> is buggy
		5118
		5119	The kqueue syscall is broken in all known versions - most versions support
		5120	only sockets, many support pipes.
		5121
		5122	Libev tries to work around this by not using C<kqueue> by default on this
		5123	rotten platform, but of course you can still ask for it when creating a
		5124	loop - embedding a socket-only kqueue loop into a select-based one is
		5125	probably going to work well.
		5126
		5127	=head3 C<poll> is buggy
		5128
		5129	Instead of fixing C<kqueue>, Apple replaced their (working) C<poll>
		5130	implementation by something calling C<kqueue> internally around the 10.5.6
		5131	release, so now C<kqueue> I<and> C<poll> are broken.
		5132
		5133	Libev tries to work around this by not using C<poll> by default on
		5134	this rotten platform, but of course you can still ask for it when creating
		5135	a loop.
		5136
		5137	=head3 C<select> is buggy
		5138
		5139	All that's left is C<select>, and of course Apple found a way to fuck this
		5140	one up as well: On OS/X, C<select> actively limits the number of file
		5141	descriptors you can pass in to 1024 - your program suddenly crashes when
		5142	you use more.
		5143
		5144	There is an undocumented "workaround" for this - defining
		5145	C<_DARWIN_UNLIMITED_SELECT>, which libev tries to use, so select I<should>
		5146	work on OS/X.
		5147
		5148	=head2 SOLARIS PROBLEMS AND WORKAROUNDS
		5149
		5150	=head3 C<errno> reentrancy
		5151
		5152	The default compile environment on Solaris is unfortunately so
		5153	thread-unsafe that you can't even use components/libraries compiled
		5154	without C<-D_REENTRANT> in a threaded program, which, of course, isn't
		5155	defined by default. A valid, if stupid, implementation choice.
		5156
		5157	If you want to use libev in threaded environments you have to make sure
		5158	it's compiled with C<_REENTRANT> defined.
		5159
		5160	=head3 Event port backend
		5161
		5162	The scalable event interface for Solaris is called "event
		5163	ports". Unfortunately, this mechanism is very buggy in all major
		5164	releases. If you run into high CPU usage, your program freezes or you get
		5165	a large number of spurious wakeups, make sure you have all the relevant
		5166	and latest kernel patches applied. No, I don't know which ones, but there
		5167	are multiple ones to apply, and afterwards, event ports actually work
		5168	great.
		5169
		5170	If you can't get it to work, you can try running the program by setting
		5171	the environment variable C<LIBEV_FLAGS=3> to only allow C<poll> and
		5172	C<select> backends.
		5173
		5174	=head2 AIX POLL BUG
		5175
		5176	AIX unfortunately has a broken C<poll.h> header. Libev works around
		5177	this by trying to avoid the poll backend altogether (i.e. it's not even
		5178	compiled in), which normally isn't a big problem as C<select> works fine
		5179	with large bitsets on AIX, and AIX is dead anyway.
		5180
3449	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS	5181	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
		5182
		5183	=head3 General issues
3450		5184
3451	Win32 doesn't support any of the standards (e.g. POSIX) that libev	5185	Win32 doesn't support any of the standards (e.g. POSIX) that libev
3452	requires, and its I/O model is fundamentally incompatible with the POSIX	5186	requires, and its I/O model is fundamentally incompatible with the POSIX
3453	model. Libev still offers limited functionality on this platform in	5187	model. Libev still offers limited functionality on this platform in
3454	the form of the C<EVBACKEND_SELECT> backend, and only supports socket	5188	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
3455	descriptors. This only applies when using Win32 natively, not when using	5189	descriptors. This only applies when using Win32 natively, not when using
3456	e.g. cygwin.	5190	e.g. cygwin. Actually, it only applies to the microsofts own compilers,
		5191	as every compiler comes with a slightly differently broken/incompatible
		5192	environment.
3457		5193
3458	Lifting these limitations would basically require the full	5194	Lifting these limitations would basically require the full
3459	re-implementation of the I/O system. If you are into these kinds of	5195	re-implementation of the I/O system. If you are into this kind of thing,
3460	things, then note that glib does exactly that for you in a very portable	5196	then note that glib does exactly that for you in a very portable way (note
3461	way (note also that glib is the slowest event library known to man).	5197	also that glib is the slowest event library known to man).
3462		5198
3463	There is no supported compilation method available on windows except	5199	There is no supported compilation method available on windows except
3464	embedding it into other applications.	5200	embedding it into other applications.
		5201
		5202	Sensible signal handling is officially unsupported by Microsoft - libev
		5203	tries its best, but under most conditions, signals will simply not work.
3465		5204
3466	Not a libev limitation but worth mentioning: windows apparently doesn't	5205	Not a libev limitation but worth mentioning: windows apparently doesn't
3467	accept large writes: instead of resulting in a partial write, windows will	5206	accept large writes: instead of resulting in a partial write, windows will
3468	either accept everything or return C<ENOBUFS> if the buffer is too large,	5207	either accept everything or return C<ENOBUFS> if the buffer is too large,
3469	so make sure you only write small amounts into your sockets (less than a	5208	so make sure you only write small amounts into your sockets (less than a
…		…
3474	the abysmal performance of winsockets, using a large number of sockets	5213	the abysmal performance of winsockets, using a large number of sockets
3475	is not recommended (and not reasonable). If your program needs to use	5214	is not recommended (and not reasonable). If your program needs to use
3476	more than a hundred or so sockets, then likely it needs to use a totally	5215	more than a hundred or so sockets, then likely it needs to use a totally
3477	different implementation for windows, as libev offers the POSIX readiness	5216	different implementation for windows, as libev offers the POSIX readiness
3478	notification model, which cannot be implemented efficiently on windows	5217	notification model, which cannot be implemented efficiently on windows
3479	(Microsoft monopoly games).	5218	(due to Microsoft monopoly games).
3480		5219
3481	A typical way to use libev under windows is to embed it (see the embedding	5220	A typical way to use libev under windows is to embed it (see the embedding
3482	section for details) and use the following F<evwrap.h> header file instead	5221	section for details) and use the following F<evwrap.h> header file instead
3483	of F<ev.h>:	5222	of F<ev.h>:
3484		5223
…		…
3491	you do I<not> compile the F<ev.c> or any other embedded source files!):	5230	you do I<not> compile the F<ev.c> or any other embedded source files!):
3492		5231
3493	#include "evwrap.h"	5232	#include "evwrap.h"
3494	#include "ev.c"	5233	#include "ev.c"
3495		5234
3496	=over 4
3497
3498	=item The winsocket select function	5235	=head3 The winsocket C<select> function
3499		5236
3500	The winsocket C<select> function doesn't follow POSIX in that it	5237	The winsocket C<select> function doesn't follow POSIX in that it
3501	requires socket I<handles> and not socket I<file descriptors> (it is	5238	requires socket I<handles> and not socket I<file descriptors> (it is
3502	also extremely buggy). This makes select very inefficient, and also	5239	also extremely buggy). This makes select very inefficient, and also
3503	requires a mapping from file descriptors to socket handles (the Microsoft	5240	requires a mapping from file descriptors to socket handles (the Microsoft
…		…
3512	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */	5249	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
3513		5250
3514	Note that winsockets handling of fd sets is O(n), so you can easily get a	5251	Note that winsockets handling of fd sets is O(n), so you can easily get a
3515	complexity in the O(n²) range when using win32.	5252	complexity in the O(n²) range when using win32.
3516		5253
3517	=item Limited number of file descriptors	5254	=head3 Limited number of file descriptors
3518		5255
3519	Windows has numerous arbitrary (and low) limits on things.	5256	Windows has numerous arbitrary (and low) limits on things.
3520		5257
3521	Early versions of winsocket's select only supported waiting for a maximum	5258	Early versions of winsocket's select only supported waiting for a maximum
3522	of C<64> handles (probably owning to the fact that all windows kernels	5259	of C<64> handles (probably owning to the fact that all windows kernels
3523	can only wait for C<64> things at the same time internally; Microsoft	5260	can only wait for C<64> things at the same time internally; Microsoft
3524	recommends spawning a chain of threads and wait for 63 handles and the	5261	recommends spawning a chain of threads and wait for 63 handles and the
3525	previous thread in each. Great).	5262	previous thread in each. Sounds great!).
3526		5263
3527	Newer versions support more handles, but you need to define C<FD_SETSIZE>	5264	Newer versions support more handles, but you need to define C<FD_SETSIZE>
3528	to some high number (e.g. C<2048>) before compiling the winsocket select	5265	to some high number (e.g. C<2048>) before compiling the winsocket select
3529	call (which might be in libev or elsewhere, for example, perl does its own	5266	call (which might be in libev or elsewhere, for example, perl and many
3530	select emulation on windows).	5267	other interpreters do their own select emulation on windows).
3531		5268
3532	Another limit is the number of file descriptors in the Microsoft runtime	5269	Another limit is the number of file descriptors in the Microsoft runtime
3533	libraries, which by default is C<64> (there must be a hidden I<64> fetish	5270	libraries, which by default is C<64> (there must be a hidden I<64>
3534	or something like this inside Microsoft). You can increase this by calling	5271	fetish or something like this inside Microsoft). You can increase this
3535	C<_setmaxstdio>, which can increase this limit to C<2048> (another	5272	by calling C<_setmaxstdio>, which can increase this limit to C<2048>
3536	arbitrary limit), but is broken in many versions of the Microsoft runtime	5273	(another arbitrary limit), but is broken in many versions of the Microsoft
3537	libraries.
3538
3539	This might get you to about C<512> or C<2048> sockets (depending on	5274	runtime libraries. This might get you to about C<512> or C<2048> sockets
3540	windows version and/or the phase of the moon). To get more, you need to	5275	(depending on windows version and/or the phase of the moon). To get more,
3541	wrap all I/O functions and provide your own fd management, but the cost of	5276	you need to wrap all I/O functions and provide your own fd management, but
3542	calling select (O(n²)) will likely make this unworkable.	5277	the cost of calling select (O(n²)) will likely make this unworkable.
3543
3544	=back
3545		5278
3546	=head2 PORTABILITY REQUIREMENTS	5279	=head2 PORTABILITY REQUIREMENTS
3547		5280
3548	In addition to a working ISO-C implementation and of course the	5281	In addition to a working ISO-C implementation and of course the
3549	backend-specific APIs, libev relies on a few additional extensions:	5282	backend-specific APIs, libev relies on a few additional extensions:
…		…
3556	Libev assumes not only that all watcher pointers have the same internal	5289	Libev assumes not only that all watcher pointers have the same internal
3557	structure (guaranteed by POSIX but not by ISO C for example), but it also	5290	structure (guaranteed by POSIX but not by ISO C for example), but it also
3558	assumes that the same (machine) code can be used to call any watcher	5291	assumes that the same (machine) code can be used to call any watcher
3559	callback: The watcher callbacks have different type signatures, but libev	5292	callback: The watcher callbacks have different type signatures, but libev
3560	calls them using an C<ev_watcher *> internally.	5293	calls them using an C<ev_watcher *> internally.
		5294
		5295	=item pointer accesses must be thread-atomic
		5296
		5297	Accessing a pointer value must be atomic, it must both be readable and
		5298	writable in one piece - this is the case on all current architectures.
3561		5299
3562	=item C<sig_atomic_t volatile> must be thread-atomic as well	5300	=item C<sig_atomic_t volatile> must be thread-atomic as well
3563		5301
3564	The type C<sig_atomic_t volatile> (or whatever is defined as	5302	The type C<sig_atomic_t volatile> (or whatever is defined as
3565	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different	5303	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different
…		…
3574	thread" or will block signals process-wide, both behaviours would	5312	thread" or will block signals process-wide, both behaviours would
3575	be compatible with libev. Interaction between C<sigprocmask> and	5313	be compatible with libev. Interaction between C<sigprocmask> and
3576	C<pthread_sigmask> could complicate things, however.	5314	C<pthread_sigmask> could complicate things, however.
3577		5315
3578	The most portable way to handle signals is to block signals in all threads	5316	The most portable way to handle signals is to block signals in all threads
3579	except the initial one, and run the default loop in the initial thread as	5317	except the initial one, and run the signal handling loop in the initial
3580	well.	5318	thread as well.
3581		5319
3582	=item C<long> must be large enough for common memory allocation sizes	5320	=item C<long> must be large enough for common memory allocation sizes
3583		5321
3584	To improve portability and simplify its API, libev uses C<long> internally	5322	To improve portability and simplify its API, libev uses C<long> internally
3585	instead of C<size_t> when allocating its data structures. On non-POSIX	5323	instead of C<size_t> when allocating its data structures. On non-POSIX
…		…
3588	watchers.	5326	watchers.
3589		5327
3590	=item C<double> must hold a time value in seconds with enough accuracy	5328	=item C<double> must hold a time value in seconds with enough accuracy
3591		5329
3592	The type C<double> is used to represent timestamps. It is required to	5330	The type C<double> is used to represent timestamps. It is required to
3593	have at least 51 bits of mantissa (and 9 bits of exponent), which is good	5331	have at least 51 bits of mantissa (and 9 bits of exponent), which is
3594	enough for at least into the year 4000. This requirement is fulfilled by	5332	good enough for at least into the year 4000 with millisecond accuracy
		5333	(the design goal for libev). This requirement is overfulfilled by
3595	implementations implementing IEEE 754 (basically all existing ones).	5334	implementations using IEEE 754, which is basically all existing ones.
		5335
		5336	With IEEE 754 doubles, you get microsecond accuracy until at least the
		5337	year 2255 (and millisecond accuracy till the year 287396 - by then, libev
		5338	is either obsolete or somebody patched it to use C<long double> or
		5339	something like that, just kidding).
3596		5340
3597	=back	5341	=back
3598		5342
3599	If you know of other additional requirements drop me a note.	5343	If you know of other additional requirements drop me a note.
3600		5344
…		…
3662	=item Processing ev_async_send: O(number_of_async_watchers)	5406	=item Processing ev_async_send: O(number_of_async_watchers)
3663		5407
3664	=item Processing signals: O(max_signal_number)	5408	=item Processing signals: O(max_signal_number)
3665		5409
3666	Sending involves a system call I<iff> there were no other C<ev_async_send>	5410	Sending involves a system call I<iff> there were no other C<ev_async_send>
3667	calls in the current loop iteration. Checking for async and signal events	5411	calls in the current loop iteration and the loop is currently
		5412	blocked. Checking for async and signal events involves iterating over all
3668	involves iterating over all running async watchers or all signal numbers.	5413	running async watchers or all signal numbers.
3669		5414
3670	=back	5415	=back
3671		5416
3672		5417
		5418	=head1 PORTING FROM LIBEV 3.X TO 4.X
		5419
		5420	The major version 4 introduced some incompatible changes to the API.
		5421
		5422	At the moment, the C<ev.h> header file provides compatibility definitions
		5423	for all changes, so most programs should still compile. The compatibility
		5424	layer might be removed in later versions of libev, so better update to the
		5425	new API early than late.
		5426
		5427	=over 4
		5428
		5429	=item C<EV_COMPAT3> backwards compatibility mechanism
		5430
		5431	The backward compatibility mechanism can be controlled by
		5432	C<EV_COMPAT3>. See L</PREPROCESSOR SYMBOLS/MACROS> in the L</EMBEDDING>
		5433	section.
		5434
		5435	=item C<ev_default_destroy> and C<ev_default_fork> have been removed
		5436
		5437	These calls can be replaced easily by their C<ev_loop_xxx> counterparts:
		5438
		5439	ev_loop_destroy (EV_DEFAULT_UC);
		5440	ev_loop_fork (EV_DEFAULT);
		5441
		5442	=item function/symbol renames
		5443
		5444	A number of functions and symbols have been renamed:
		5445
		5446	ev_loop => ev_run
		5447	EVLOOP_NONBLOCK => EVRUN_NOWAIT
		5448	EVLOOP_ONESHOT => EVRUN_ONCE
		5449
		5450	ev_unloop => ev_break
		5451	EVUNLOOP_CANCEL => EVBREAK_CANCEL
		5452	EVUNLOOP_ONE => EVBREAK_ONE
		5453	EVUNLOOP_ALL => EVBREAK_ALL
		5454
		5455	EV_TIMEOUT => EV_TIMER
		5456
		5457	ev_loop_count => ev_iteration
		5458	ev_loop_depth => ev_depth
		5459	ev_loop_verify => ev_verify
		5460
		5461	Most functions working on C<struct ev_loop> objects don't have an
		5462	C<ev_loop_> prefix, so it was removed; C<ev_loop>, C<ev_unloop> and
		5463	associated constants have been renamed to not collide with the C<struct
		5464	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme
		5465	as all other watcher types. Note that C<ev_loop_fork> is still called
		5466	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>
		5467	typedef.
		5468
		5469	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>
		5470
		5471	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different
		5472	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile
		5473	and work, but the library code will of course be larger.
		5474
		5475	=back
		5476
		5477
		5478	=head1 GLOSSARY
		5479
		5480	=over 4
		5481
		5482	=item active
		5483
		5484	A watcher is active as long as it has been started and not yet stopped.
		5485	See L</WATCHER STATES> for details.
		5486
		5487	=item application
		5488
		5489	In this document, an application is whatever is using libev.
		5490
		5491	=item backend
		5492
		5493	The part of the code dealing with the operating system interfaces.
		5494
		5495	=item callback
		5496
		5497	The address of a function that is called when some event has been
		5498	detected. Callbacks are being passed the event loop, the watcher that
		5499	received the event, and the actual event bitset.
		5500
		5501	=item callback/watcher invocation
		5502
		5503	The act of calling the callback associated with a watcher.
		5504
		5505	=item event
		5506
		5507	A change of state of some external event, such as data now being available
		5508	for reading on a file descriptor, time having passed or simply not having
		5509	any other events happening anymore.
		5510
		5511	In libev, events are represented as single bits (such as C<EV_READ> or
		5512	C<EV_TIMER>).
		5513
		5514	=item event library
		5515
		5516	A software package implementing an event model and loop.
		5517
		5518	=item event loop
		5519
		5520	An entity that handles and processes external events and converts them
		5521	into callback invocations.
		5522
		5523	=item event model
		5524
		5525	The model used to describe how an event loop handles and processes
		5526	watchers and events.
		5527
		5528	=item pending
		5529
		5530	A watcher is pending as soon as the corresponding event has been
		5531	detected. See L</WATCHER STATES> for details.
		5532
		5533	=item real time
		5534
		5535	The physical time that is observed. It is apparently strictly monotonic :)
		5536
		5537	=item wall-clock time
		5538
		5539	The time and date as shown on clocks. Unlike real time, it can actually
		5540	be wrong and jump forwards and backwards, e.g. when you adjust your
		5541	clock.
		5542
		5543	=item watcher
		5544
		5545	A data structure that describes interest in certain events. Watchers need
		5546	to be started (attached to an event loop) before they can receive events.
		5547
		5548	=back
		5549
3673	=head1 AUTHOR	5550	=head1 AUTHOR
3674		5551
3675	Marc Lehmann <libev@schmorp.de>.	5552	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael
		5553	Magnusson and Emanuele Giaquinta, and minor corrections by many others.
3676		5554

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines