ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.319 by root, Fri Oct 22 10:09:12 2010 UTC vs.
Revision 1.455 by root, Wed Jun 26 00:01:46 2019 UTC

		1	=encoding utf-8
		2
1	=head1 NAME	3	=head1 NAME
2		4
3	libev - a high performance full-featured event loop written in C	5	libev - a high performance full-featured event loop written in C
4		6
5	=head1 SYNOPSIS	7	=head1 SYNOPSIS
…		…
43		45
44	int	46	int
45	main (void)	47	main (void)
46	{	48	{
47	// use the default event loop unless you have special needs	49	// use the default event loop unless you have special needs
48	struct ev_loop *loop = ev_default_loop (0);	50	struct ev_loop *loop = EV_DEFAULT;
49		51
50	// initialise an io watcher, then start it	52	// initialise an io watcher, then start it
51	// this one will watch for stdin to become readable	53	// this one will watch for stdin to become readable
52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	54	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
53	ev_io_start (loop, &stdin_watcher);	55	ev_io_start (loop, &stdin_watcher);
…		…
58	ev_timer_start (loop, &timeout_watcher);	60	ev_timer_start (loop, &timeout_watcher);
59		61
60	// now wait for events to arrive	62	// now wait for events to arrive
61	ev_run (loop, 0);	63	ev_run (loop, 0);
62		64
63	// unloop was called, so exit	65	// break was called, so exit
64	return 0;	66	return 0;
65	}	67	}
66		68
67	=head1 ABOUT THIS DOCUMENT	69	=head1 ABOUT THIS DOCUMENT
68		70
…		…
78	with libev.	80	with libev.
79		81
80	Familiarity with event based programming techniques in general is assumed	82	Familiarity with event based programming techniques in general is assumed
81	throughout this document.	83	throughout this document.
82		84
		85	=head1 WHAT TO READ WHEN IN A HURRY
		86
		87	This manual tries to be very detailed, but unfortunately, this also makes
		88	it very long. If you just want to know the basics of libev, I suggest
		89	reading L</ANATOMY OF A WATCHER>, then the L</EXAMPLE PROGRAM> above and
		90	look up the missing functions in L</GLOBAL FUNCTIONS> and the C<ev_io> and
		91	C<ev_timer> sections in L</WATCHER TYPES>.
		92
83	=head1 ABOUT LIBEV	93	=head1 ABOUT LIBEV
84		94
85	Libev is an event loop: you register interest in certain events (such as a	95	Libev is an event loop: you register interest in certain events (such as a
86	file descriptor being readable or a timeout occurring), and it will manage	96	file descriptor being readable or a timeout occurring), and it will manage
87	these event sources and provide your program with events.	97	these event sources and provide your program with events.
…		…
95	details of the event, and then hand it over to libev by I<starting> the	105	details of the event, and then hand it over to libev by I<starting> the
96	watcher.	106	watcher.
97		107
98	=head2 FEATURES	108	=head2 FEATURES
99		109
100	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	110	Libev supports C<select>, C<poll>, the Linux-specific aio and C<epoll>
101	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	111	interfaces, the BSD-specific C<kqueue> and the Solaris-specific event port
102	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	112	mechanisms for file descriptor events (C<ev_io>), the Linux C<inotify>
103	(for C<ev_stat>), Linux eventfd/signalfd (for faster and cleaner	113	interface (for C<ev_stat>), Linux eventfd/signalfd (for faster and cleaner
104	inter-thread wakeup (C<ev_async>)/signal handling (C<ev_signal>)) relative	114	inter-thread wakeup (C<ev_async>)/signal handling (C<ev_signal>)) relative
105	timers (C<ev_timer>), absolute timers with customised rescheduling	115	timers (C<ev_timer>), absolute timers with customised rescheduling
106	(C<ev_periodic>), synchronous signals (C<ev_signal>), process status	116	(C<ev_periodic>), synchronous signals (C<ev_signal>), process status
107	change events (C<ev_child>), and event watchers dealing with the event	117	change events (C<ev_child>), and event watchers dealing with the event
108	loop mechanism itself (C<ev_idle>, C<ev_embed>, C<ev_prepare> and	118	loop mechanism itself (C<ev_idle>, C<ev_embed>, C<ev_prepare> and
…		…
149	When libev detects a usage error such as a negative timer interval, then	159	When libev detects a usage error such as a negative timer interval, then
150	it will print a diagnostic message and abort (via the C<assert> mechanism,	160	it will print a diagnostic message and abort (via the C<assert> mechanism,
151	so C<NDEBUG> will disable this checking): these are programming errors in	161	so C<NDEBUG> will disable this checking): these are programming errors in
152	the libev caller and need to be fixed there.	162	the libev caller and need to be fixed there.
153		163
		164	Via the C<EV_FREQUENT> macro you can compile in and/or enable extensive
		165	consistency checking code inside libev that can be used to check for
		166	internal inconsistencies, suually caused by application bugs.
		167
154	Libev also has a few internal error-checking C<assert>ions, and also has	168	Libev also has a few internal error-checking C<assert>ions. These do not
155	extensive consistency checking code. These do not trigger under normal
156	circumstances, as they indicate either a bug in libev or worse.	169	trigger under normal circumstances, as they indicate either a bug in libev
		170	or worse.
157		171
158		172
159	=head1 GLOBAL FUNCTIONS	173	=head1 GLOBAL FUNCTIONS
160		174
161	These functions can be called anytime, even before initialising the	175	These functions can be called anytime, even before initialising the
…		…
165		179
166	=item ev_tstamp ev_time ()	180	=item ev_tstamp ev_time ()
167		181
168	Returns the current time as libev would use it. Please note that the	182	Returns the current time as libev would use it. Please note that the
169	C<ev_now> function is usually faster and also often returns the timestamp	183	C<ev_now> function is usually faster and also often returns the timestamp
170	you actually want to know. Also interetsing is the combination of	184	you actually want to know. Also interesting is the combination of
171	C<ev_update_now> and C<ev_now>.	185	C<ev_now_update> and C<ev_now>.
172		186
173	=item ev_sleep (ev_tstamp interval)	187	=item ev_sleep (ev_tstamp interval)
174		188
175	Sleep for the given interval: The current thread will be blocked until	189	Sleep for the given interval: The current thread will be blocked
176	either it is interrupted or the given time interval has passed. Basically	190	until either it is interrupted or the given time interval has
		191	passed (approximately - it might return a bit earlier even if not
		192	interrupted). Returns immediately if C<< interval <= 0 >>.
		193
177	this is a sub-second-resolution C<sleep ()>.	194	Basically this is a sub-second-resolution C<sleep ()>.
		195
		196	The range of the C<interval> is limited - libev only guarantees to work
		197	with sleep times of up to one day (C<< interval <= 86400 >>).
178		198
179	=item int ev_version_major ()	199	=item int ev_version_major ()
180		200
181	=item int ev_version_minor ()	201	=item int ev_version_minor ()
182		202
…		…
193	as this indicates an incompatible change. Minor versions are usually	213	as this indicates an incompatible change. Minor versions are usually
194	compatible to older versions, so a larger minor version alone is usually	214	compatible to older versions, so a larger minor version alone is usually
195	not a problem.	215	not a problem.
196		216
197	Example: Make sure we haven't accidentally been linked against the wrong	217	Example: Make sure we haven't accidentally been linked against the wrong
198	version (note, however, that this will not detect ABI mismatches :).	218	version (note, however, that this will not detect other ABI mismatches,
		219	such as LFS or reentrancy).
199		220
200	assert (("libev version mismatch",	221	assert (("libev version mismatch",
201	ev_version_major () == EV_VERSION_MAJOR	222	ev_version_major () == EV_VERSION_MAJOR
202	&& ev_version_minor () >= EV_VERSION_MINOR));	223	&& ev_version_minor () >= EV_VERSION_MINOR));
203		224
…		…
232	the current system, you would need to look at C<ev_embeddable_backends ()	253	the current system, you would need to look at C<ev_embeddable_backends ()
233	& ev_supported_backends ()>, likewise for recommended ones.	254	& ev_supported_backends ()>, likewise for recommended ones.
234		255
235	See the description of C<ev_embed> watchers for more info.	256	See the description of C<ev_embed> watchers for more info.
236		257
237	=item ev_set_allocator (void *(*cb)(void *ptr, long size)) [NOT REENTRANT]	258	=item ev_set_allocator (void *(*cb)(void *ptr, long size) throw ())
238		259
239	Sets the allocation function to use (the prototype is similar - the	260	Sets the allocation function to use (the prototype is similar - the
240	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is	261	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
241	used to allocate and free memory (no surprises here). If it returns zero	262	used to allocate and free memory (no surprises here). If it returns zero
242	when memory needs to be allocated (C<size != 0>), the library might abort	263	when memory needs to be allocated (C<size != 0>), the library might abort
…		…
248		269
249	You could override this function in high-availability programs to, say,	270	You could override this function in high-availability programs to, say,
250	free some memory if it cannot allocate memory, to use a special allocator,	271	free some memory if it cannot allocate memory, to use a special allocator,
251	or even to sleep a while and retry until some memory is available.	272	or even to sleep a while and retry until some memory is available.
252		273
		274	Example: The following is the C<realloc> function that libev itself uses
		275	which should work with C<realloc> and C<free> functions of all kinds and
		276	is probably a good basis for your own implementation.
		277
		278	static void *
		279	ev_realloc_emul (void *ptr, long size) EV_NOEXCEPT
		280	{
		281	if (size)
		282	return realloc (ptr, size);
		283
		284	free (ptr);
		285	return 0;
		286	}
		287
253	Example: Replace the libev allocator with one that waits a bit and then	288	Example: Replace the libev allocator with one that waits a bit and then
254	retries (example requires a standards-compliant C<realloc>).	289	retries.
255		290
256	static void *	291	static void *
257	persistent_realloc (void *ptr, size_t size)	292	persistent_realloc (void *ptr, size_t size)
258	{	293	{
		294	if (!size)
		295	{
		296	free (ptr);
		297	return 0;
		298	}
		299
259	for (;;)	300	for (;;)
260	{	301	{
261	void *newptr = realloc (ptr, size);	302	void *newptr = realloc (ptr, size);
262		303
263	if (newptr)	304	if (newptr)
…		…
268	}	309	}
269		310
270	...	311	...
271	ev_set_allocator (persistent_realloc);	312	ev_set_allocator (persistent_realloc);
272		313
273	=item ev_set_syserr_cb (void (*cb)(const char *msg)); [NOT REENTRANT]	314	=item ev_set_syserr_cb (void (*cb)(const char *msg) throw ())
274		315
275	Set the callback function to call on a retryable system call error (such	316	Set the callback function to call on a retryable system call error (such
276	as failed select, poll, epoll_wait). The message is a printable string	317	as failed select, poll, epoll_wait). The message is a printable string
277	indicating the system call or subsystem causing the problem. If this	318	indicating the system call or subsystem causing the problem. If this
278	callback is set, then libev will expect it to remedy the situation, no	319	callback is set, then libev will expect it to remedy the situation, no
…		…
290	}	331	}
291		332
292	...	333	...
293	ev_set_syserr_cb (fatal_error);	334	ev_set_syserr_cb (fatal_error);
294		335
		336	=item ev_feed_signal (int signum)
		337
		338	This function can be used to "simulate" a signal receive. It is completely
		339	safe to call this function at any time, from any context, including signal
		340	handlers or random threads.
		341
		342	Its main use is to customise signal handling in your process, especially
		343	in the presence of threads. For example, you could block signals
		344	by default in all threads (and specifying C<EVFLAG_NOSIGMASK> when
		345	creating any loops), and in one thread, use C<sigwait> or any other
		346	mechanism to wait for signals, then "deliver" them to libev by calling
		347	C<ev_feed_signal>.
		348
295	=back	349	=back
296		350
297	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	351	=head1 FUNCTIONS CONTROLLING EVENT LOOPS
298		352
299	An event loop is described by a C<struct ev_loop *> (the C<struct> is	353	An event loop is described by a C<struct ev_loop *> (the C<struct> is
300	I<not> optional in this case unless libev 3 compatibility is disabled, as	354	I<not> optional in this case unless libev 3 compatibility is disabled, as
301	libev 3 had an C<ev_loop> function colliding with the struct name).	355	libev 3 had an C<ev_loop> function colliding with the struct name).
302		356
303	The library knows two types of such loops, the I<default> loop, which	357	The library knows two types of such loops, the I<default> loop, which
304	supports signals and child events, and dynamically created event loops	358	supports child process events, and dynamically created event loops which
305	which do not.	359	do not.
306		360
307	=over 4	361	=over 4
308		362
309	=item struct ev_loop *ev_default_loop (unsigned int flags)	363	=item struct ev_loop *ev_default_loop (unsigned int flags)
310		364
311	This will initialise the default event loop if it hasn't been initialised	365	This returns the "default" event loop object, which is what you should
312	yet and return it. If the default loop could not be initialised, returns	366	normally use when you just need "the event loop". Event loop objects and
313	false. If it already was initialised it simply returns it (and ignores the	367	the C<flags> parameter are described in more detail in the entry for
314	flags. If that is troubling you, check C<ev_backend ()> afterwards).	368	C<ev_loop_new>.
		369
		370	If the default loop is already initialised then this function simply
		371	returns it (and ignores the flags. If that is troubling you, check
		372	C<ev_backend ()> afterwards). Otherwise it will create it with the given
		373	flags, which should almost always be C<0>, unless the caller is also the
		374	one calling C<ev_run> or otherwise qualifies as "the main program".
315		375
316	If you don't know what event loop to use, use the one returned from this	376	If you don't know what event loop to use, use the one returned from this
317	function.	377	function (or via the C<EV_DEFAULT> macro).
318		378
319	Note that this function is I<not> thread-safe, so if you want to use it	379	Note that this function is I<not> thread-safe, so if you want to use it
320	from multiple threads, you have to lock (note also that this is unlikely,	380	from multiple threads, you have to employ some kind of mutex (note also
321	as loops cannot be shared easily between threads anyway).	381	that this case is unlikely, as loops cannot be shared easily between
		382	threads anyway).
322		383
323	The default loop is the only loop that can handle C<ev_signal> and	384	The default loop is the only loop that can handle C<ev_child> watchers,
324	C<ev_child> watchers, and to do this, it always registers a handler	385	and to do this, it always registers a handler for C<SIGCHLD>. If this is
325	for C<SIGCHLD>. If this is a problem for your application you can either	386	a problem for your application you can either create a dynamic loop with
326	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you	387	C<ev_loop_new> which doesn't do that, or you can simply overwrite the
327	can simply overwrite the C<SIGCHLD> signal handler I<after> calling	388	C<SIGCHLD> signal handler I<after> calling C<ev_default_init>.
328	C<ev_default_init>.	389
		390	Example: This is the most typical usage.
		391
		392	if (!ev_default_loop (0))
		393	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		394
		395	Example: Restrict libev to the select and poll backends, and do not allow
		396	environment settings to be taken into account:
		397
		398	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
		399
		400	=item struct ev_loop *ev_loop_new (unsigned int flags)
		401
		402	This will create and initialise a new event loop object. If the loop
		403	could not be initialised, returns false.
		404
		405	This function is thread-safe, and one common way to use libev with
		406	threads is indeed to create one loop per thread, and using the default
		407	loop in the "main" or "initial" thread.
329		408
330	The flags argument can be used to specify special behaviour or specific	409	The flags argument can be used to specify special behaviour or specific
331	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	410	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
332		411
333	The following flags are supported:	412	The following flags are supported:
…		…
343		422
344	If this flag bit is or'ed into the flag value (or the program runs setuid	423	If this flag bit is or'ed into the flag value (or the program runs setuid
345	or setgid) then libev will I<not> look at the environment variable	424	or setgid) then libev will I<not> look at the environment variable
346	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will	425	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will
347	override the flags completely if it is found in the environment. This is	426	override the flags completely if it is found in the environment. This is
348	useful to try out specific backends to test their performance, or to work	427	useful to try out specific backends to test their performance, to work
349	around bugs.	428	around bugs, or to make libev threadsafe (accessing environment variables
		429	cannot be done in a threadsafe way, but usually it works if no other
		430	thread modifies them).
350		431
351	=item C<EVFLAG_FORKCHECK>	432	=item C<EVFLAG_FORKCHECK>
352		433
353	Instead of calling C<ev_loop_fork> manually after a fork, you can also	434	Instead of calling C<ev_loop_fork> manually after a fork, you can also
354	make libev check for a fork in each iteration by enabling this flag.	435	make libev check for a fork in each iteration by enabling this flag.
355		436
356	This works by calling C<getpid ()> on every iteration of the loop,	437	This works by calling C<getpid ()> on every iteration of the loop,
357	and thus this might slow down your event loop if you do a lot of loop	438	and thus this might slow down your event loop if you do a lot of loop
358	iterations and little real work, but is usually not noticeable (on my	439	iterations and little real work, but is usually not noticeable (on my
359	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence	440	GNU/Linux system for example, C<getpid> is actually a simple 5-insn
360	without a system call and thus I<very> fast, but my GNU/Linux system also has	441	sequence without a system call and thus I<very> fast, but my GNU/Linux
361	C<pthread_atfork> which is even faster).	442	system also has C<pthread_atfork> which is even faster). (Update: glibc
		443	versions 2.25 apparently removed the C<getpid> optimisation again).
362		444
363	The big advantage of this flag is that you can forget about fork (and	445	The big advantage of this flag is that you can forget about fork (and
364	forget about forgetting to tell libev about forking) when you use this	446	forget about forgetting to tell libev about forking, although you still
365	flag.	447	have to ignore C<SIGPIPE>) when you use this flag.
366		448
367	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>	449	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>
368	environment variable.	450	environment variable.
369		451
370	=item C<EVFLAG_NOINOTIFY>	452	=item C<EVFLAG_NOINOTIFY>
371		453
372	When this flag is specified, then libev will not attempt to use the	454	When this flag is specified, then libev will not attempt to use the
373	I<inotify> API for it's C<ev_stat> watchers. Apart from debugging and	455	I<inotify> API for its C<ev_stat> watchers. Apart from debugging and
374	testing, this flag can be useful to conserve inotify file descriptors, as	456	testing, this flag can be useful to conserve inotify file descriptors, as
375	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.	457	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.
376		458
377	=item C<EVFLAG_SIGNALFD>	459	=item C<EVFLAG_SIGNALFD>
378		460
379	When this flag is specified, then libev will attempt to use the	461	When this flag is specified, then libev will attempt to use the
380	I<signalfd> API for it's C<ev_signal> (and C<ev_child>) watchers. This API	462	I<signalfd> API for its C<ev_signal> (and C<ev_child>) watchers. This API
381	delivers signals synchronously, which makes it both faster and might make	463	delivers signals synchronously, which makes it both faster and might make
382	it possible to get the queued signal data. It can also simplify signal	464	it possible to get the queued signal data. It can also simplify signal
383	handling with threads, as long as you properly block signals in your	465	handling with threads, as long as you properly block signals in your
384	threads that are not interested in handling them.	466	threads that are not interested in handling them.
385		467
386	Signalfd will not be used by default as this changes your signal mask, and	468	Signalfd will not be used by default as this changes your signal mask, and
387	there are a lot of shoddy libraries and programs (glib's threadpool for	469	there are a lot of shoddy libraries and programs (glib's threadpool for
388	example) that can't properly initialise their signal masks.	470	example) that can't properly initialise their signal masks.
		471
		472	=item C<EVFLAG_NOSIGMASK>
		473
		474	When this flag is specified, then libev will avoid to modify the signal
		475	mask. Specifically, this means you have to make sure signals are unblocked
		476	when you want to receive them.
		477
		478	This behaviour is useful when you want to do your own signal handling, or
		479	want to handle signals only in specific threads and want to avoid libev
		480	unblocking the signals.
		481
		482	It's also required by POSIX in a threaded program, as libev calls
		483	C<sigprocmask>, whose behaviour is officially unspecified.
		484
		485	This flag's behaviour will become the default in future versions of libev.
389		486
390	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	487	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
391		488
392	This is your standard select(2) backend. Not I<completely> standard, as	489	This is your standard select(2) backend. Not I<completely> standard, as
393	libev tries to roll its own fd_set with no limits on the number of fds,	490	libev tries to roll its own fd_set with no limits on the number of fds,
…		…
418	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and	515	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and
419	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.	516	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.
420		517
421	=item C<EVBACKEND_EPOLL> (value 4, Linux)	518	=item C<EVBACKEND_EPOLL> (value 4, Linux)
422		519
423	Use the linux-specific epoll(7) interface (for both pre- and post-2.6.9	520	Use the Linux-specific epoll(7) interface (for both pre- and post-2.6.9
424	kernels).	521	kernels).
425		522
426	For few fds, this backend is a bit little slower than poll and select,	523	For few fds, this backend is a bit little slower than poll and select, but
427	but it scales phenomenally better. While poll and select usually scale	524	it scales phenomenally better. While poll and select usually scale like
428	like O(total_fds) where n is the total number of fds (or the highest fd),	525	O(total_fds) where total_fds is the total number of fds (or the highest
429	epoll scales either O(1) or O(active_fds).	526	fd), epoll scales either O(1) or O(active_fds).
430		527
431	The epoll mechanism deserves honorable mention as the most misdesigned	528	The epoll mechanism deserves honorable mention as the most misdesigned
432	of the more advanced event mechanisms: mere annoyances include silently	529	of the more advanced event mechanisms: mere annoyances include silently
433	dropping file descriptors, requiring a system call per change per file	530	dropping file descriptors, requiring a system call per change per file
434	descriptor (and unnecessary guessing of parameters), problems with dup and	531	descriptor (and unnecessary guessing of parameters), problems with dup,
		532	returning before the timeout value, resulting in additional iterations
		533	(and only giving 5ms accuracy while select on the same platform gives
435	so on. The biggest issue is fork races, however - if a program forks then	534	0.1ms) and so on. The biggest issue is fork races, however - if a program
436	I<both> parent and child process have to recreate the epoll set, which can	535	forks then I<both> parent and child process have to recreate the epoll
437	take considerable time (one syscall per file descriptor) and is of course	536	set, which can take considerable time (one syscall per file descriptor)
438	hard to detect.	537	and is of course hard to detect.
439		538
440	Epoll is also notoriously buggy - embedding epoll fds I<should> work, but	539	Epoll is also notoriously buggy - embedding epoll fds I<should> work,
441	of course I<doesn't>, and epoll just loves to report events for totally	540	but of course I<doesn't>, and epoll just loves to report events for
442	I<different> file descriptors (even already closed ones, so one cannot	541	totally I<different> file descriptors (even already closed ones, so
443	even remove them from the set) than registered in the set (especially	542	one cannot even remove them from the set) than registered in the set
444	on SMP systems). Libev tries to counter these spurious notifications by	543	(especially on SMP systems). Libev tries to counter these spurious
445	employing an additional generation counter and comparing that against the	544	notifications by employing an additional generation counter and comparing
446	events to filter out spurious ones, recreating the set when required. Last	545	that against the events to filter out spurious ones, recreating the set
		546	when required. Epoll also erroneously rounds down timeouts, but gives you
		547	no way to know when and by how much, so sometimes you have to busy-wait
		548	because epoll returns immediately despite a nonzero timeout. And last
447	not least, it also refuses to work with some file descriptors which work	549	not least, it also refuses to work with some file descriptors which work
448	perfectly fine with C<select> (files, many character devices...).	550	perfectly fine with C<select> (files, many character devices...).
		551
		552	Epoll is truly the train wreck among event poll mechanisms, a frankenpoll,
		553	cobbled together in a hurry, no thought to design or interaction with
		554	others. Oh, the pain, will it ever stop...
449		555
450	While stopping, setting and starting an I/O watcher in the same iteration	556	While stopping, setting and starting an I/O watcher in the same iteration
451	will result in some caching, there is still a system call per such	557	will result in some caching, there is still a system call per such
452	incident (because the same I<file descriptor> could point to a different	558	incident (because the same I<file descriptor> could point to a different
453	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed	559	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed
…		…
465	All this means that, in practice, C<EVBACKEND_SELECT> can be as fast or	571	All this means that, in practice, C<EVBACKEND_SELECT> can be as fast or
466	faster than epoll for maybe up to a hundred file descriptors, depending on	572	faster than epoll for maybe up to a hundred file descriptors, depending on
467	the usage. So sad.	573	the usage. So sad.
468		574
469	While nominally embeddable in other event loops, this feature is broken in	575	While nominally embeddable in other event loops, this feature is broken in
470	all kernel versions tested so far.	576	a lot of kernel revisions, but probably(!) works in current versions.
471		577
472	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as	578	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
473	C<EVBACKEND_POLL>.	579	C<EVBACKEND_POLL>.
474		580
		581	=item C<EVBACKEND_LINUXAIO> (value 64, Linux)
		582
		583	Use the Linux-specific Linux AIO (I<not> C<< aio(7) >> but C<<
		584	io_submit(2) >>) event interface available in post-4.18 kernels (but libev
		585	only tries to use it in 4.19+).
		586
		587	This is another Linux train wreck of an event interface.
		588
		589	If this backend works for you (as of this writing, it was very
		590	experimental), it is the best event interface available on Linux and might
		591	be well worth enabling it - if it isn't available in your kernel this will
		592	be detected and this backend will be skipped.
		593
		594	This backend can batch oneshot requests and supports a user-space ring
		595	buffer to receive events. It also doesn't suffer from most of the design
		596	problems of epoll (such as not being able to remove event sources from
		597	the epoll set), and generally sounds too good to be true. Because, this
		598	being the Linux kernel, of course it suffers from a whole new set of
		599	limitations, forcing you to fall back to epoll, inheriting all its design
		600	issues.
		601
		602	For one, it is not easily embeddable (but probably could be done using
		603	an event fd at some extra overhead). It also is subject to a system wide
		604	limit that can be configured in F</proc/sys/fs/aio-max-nr>. If no AIO
		605	requests are left, this backend will be skipped during initialisation, and
		606	will switch to epoll when the loop is active.
		607
		608	Most problematic in practice, however, is that not all file descriptors
		609	work with it. For example, in Linux 5.1, TCP sockets, pipes, event fds,
		610	files, F</dev/null> and many others are supported, but ttys do not work
		611	properly (a known bug that the kernel developers don't care about, see
		612	L<https://lore.kernel.org/patchwork/patch/1047453/>), so this is not
		613	(yet?) a generic event polling interface.
		614
		615	Overall, it seems the Linux developers just don't want it to have a
		616	generic event handling mechanism other than C<select> or C<poll>.
		617
		618	To work around all these problem, the current version of libev uses its
		619	epoll backend as a fallback for file descriptor types that do not work. Or
		620	falls back completely to epoll if the kernel acts up.
		621
		622	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
		623	C<EVBACKEND_POLL>.
		624
475	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	625	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
476		626
477	Kqueue deserves special mention, as at the time of this writing, it	627	Kqueue deserves special mention, as at the time this backend was
478	was broken on all BSDs except NetBSD (usually it doesn't work reliably	628	implemented, it was broken on all BSDs except NetBSD (usually it doesn't
479	with anything but sockets and pipes, except on Darwin, where of course	629	work reliably with anything but sockets and pipes, except on Darwin,
480	it's completely useless). Unlike epoll, however, whose brokenness	630	where of course it's completely useless). Unlike epoll, however, whose
481	is by design, these kqueue bugs can (and eventually will) be fixed	631	brokenness is by design, these kqueue bugs can be (and mostly have been)
482	without API changes to existing programs. For this reason it's not being	632	fixed without API changes to existing programs. For this reason it's not
483	"auto-detected" unless you explicitly specify it in the flags (i.e. using	633	being "auto-detected" on all platforms unless you explicitly specify it
484	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)	634	in the flags (i.e. using C<EVBACKEND_KQUEUE>) or libev was compiled on a
485	system like NetBSD.	635	known-to-be-good (-enough) system like NetBSD.
486		636
487	You still can embed kqueue into a normal poll or select backend and use it	637	You still can embed kqueue into a normal poll or select backend and use it
488	only for sockets (after having made sure that sockets work with kqueue on	638	only for sockets (after having made sure that sockets work with kqueue on
489	the target platform). See C<ev_embed> watchers for more info.	639	the target platform). See C<ev_embed> watchers for more info.
490		640
491	It scales in the same way as the epoll backend, but the interface to the	641	It scales in the same way as the epoll backend, but the interface to the
492	kernel is more efficient (which says nothing about its actual speed, of	642	kernel is more efficient (which says nothing about its actual speed, of
493	course). While stopping, setting and starting an I/O watcher does never	643	course). While stopping, setting and starting an I/O watcher does never
494	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to	644	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to
495	two event changes per incident. Support for C<fork ()> is very bad (but	645	two event changes per incident. Support for C<fork ()> is very bad (you
496	sane, unlike epoll) and it drops fds silently in similarly hard-to-detect	646	might have to leak fds on fork, but it's more sane than epoll) and it
497	cases	647	drops fds silently in similarly hard-to-detect cases.
498		648
499	This backend usually performs well under most conditions.	649	This backend usually performs well under most conditions.
500		650
501	While nominally embeddable in other event loops, this doesn't work	651	While nominally embeddable in other event loops, this doesn't work
502	everywhere, so you might need to test for this. And since it is broken	652	everywhere, so you might need to test for this. And since it is broken
…		…
519	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	669	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
520		670
521	This uses the Solaris 10 event port mechanism. As with everything on Solaris,	671	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
522	it's really slow, but it still scales very well (O(active_fds)).	672	it's really slow, but it still scales very well (O(active_fds)).
523		673
524	Please note that Solaris event ports can deliver a lot of spurious
525	notifications, so you need to use non-blocking I/O or other means to avoid
526	blocking when no data (or space) is available.
527
528	While this backend scales well, it requires one system call per active	674	While this backend scales well, it requires one system call per active
529	file descriptor per loop iteration. For small and medium numbers of file	675	file descriptor per loop iteration. For small and medium numbers of file
530	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend	676	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
531	might perform better.	677	might perform better.
532		678
533	On the positive side, with the exception of the spurious readiness	679	On the positive side, this backend actually performed fully to
534	notifications, this backend actually performed fully to specification
535	in all tests and is fully embeddable, which is a rare feat among the	680	specification in all tests and is fully embeddable, which is a rare feat
536	OS-specific backends (I vastly prefer correctness over speed hacks).	681	among the OS-specific backends (I vastly prefer correctness over speed
		682	hacks).
		683
		684	On the negative side, the interface is I<bizarre> - so bizarre that
		685	even sun itself gets it wrong in their code examples: The event polling
		686	function sometimes returns events to the caller even though an error
		687	occurred, but with no indication whether it has done so or not (yes, it's
		688	even documented that way) - deadly for edge-triggered interfaces where you
		689	absolutely have to know whether an event occurred or not because you have
		690	to re-arm the watcher.
		691
		692	Fortunately libev seems to be able to work around these idiocies.
537		693
538	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as	694	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
539	C<EVBACKEND_POLL>.	695	C<EVBACKEND_POLL>.
540		696
541	=item C<EVBACKEND_ALL>	697	=item C<EVBACKEND_ALL>
542		698
543	Try all backends (even potentially broken ones that wouldn't be tried	699	Try all backends (even potentially broken ones that wouldn't be tried
544	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	700	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
545	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	701	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
546		702
547	It is definitely not recommended to use this flag.	703	It is definitely not recommended to use this flag, use whatever
		704	C<ev_recommended_backends ()> returns, or simply do not specify a backend
		705	at all.
		706
		707	=item C<EVBACKEND_MASK>
		708
		709	Not a backend at all, but a mask to select all backend bits from a
		710	C<flags> value, in case you want to mask out any backends from a flags
		711	value (e.g. when modifying the C<LIBEV_FLAGS> environment variable).
548		712
549	=back	713	=back
550		714
551	If one or more of the backend flags are or'ed into the flags value,	715	If one or more of the backend flags are or'ed into the flags value,
552	then only these backends will be tried (in the reverse order as listed	716	then only these backends will be tried (in the reverse order as listed
553	here). If none are specified, all backends in C<ev_recommended_backends	717	here). If none are specified, all backends in C<ev_recommended_backends
554	()> will be tried.	718	()> will be tried.
555		719
556	Example: This is the most typical usage.
557
558	if (!ev_default_loop (0))
559	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
560
561	Example: Restrict libev to the select and poll backends, and do not allow
562	environment settings to be taken into account:
563
564	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
565
566	Example: Use whatever libev has to offer, but make sure that kqueue is
567	used if available (warning, breaks stuff, best use only with your own
568	private event loop and only if you know the OS supports your types of
569	fds):
570
571	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
572
573	=item struct ev_loop *ev_loop_new (unsigned int flags)
574
575	Similar to C<ev_default_loop>, but always creates a new event loop that is
576	always distinct from the default loop.
577
578	Note that this function I<is> thread-safe, and one common way to use
579	libev with threads is indeed to create one loop per thread, and using the
580	default loop in the "main" or "initial" thread.
581
582	Example: Try to create a event loop that uses epoll and nothing else.	720	Example: Try to create a event loop that uses epoll and nothing else.
583		721
584	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	722	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
585	if (!epoller)	723	if (!epoller)
586	fatal ("no epoll found here, maybe it hides under your chair");	724	fatal ("no epoll found here, maybe it hides under your chair");
587		725
		726	Example: Use whatever libev has to offer, but make sure that kqueue is
		727	used if available.
		728
		729	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_KQUEUE);
		730
		731	Example: Similarly, on linux, you mgiht want to take advantage of the
		732	linux aio backend if possible, but fall back to something else if that
		733	isn't available.
		734
		735	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_LINUXAIO);
		736
588	=item ev_default_destroy ()	737	=item ev_loop_destroy (loop)
589		738
590	Destroys the default loop (frees all memory and kernel state etc.). None	739	Destroys an event loop object (frees all memory and kernel state
591	of the active event watchers will be stopped in the normal sense, so	740	etc.). None of the active event watchers will be stopped in the normal
592	e.g. C<ev_is_active> might still return true. It is your responsibility to	741	sense, so e.g. C<ev_is_active> might still return true. It is your
593	either stop all watchers cleanly yourself I<before> calling this function,	742	responsibility to either stop all watchers cleanly yourself I<before>
594	or cope with the fact afterwards (which is usually the easiest thing, you	743	calling this function, or cope with the fact afterwards (which is usually
595	can just ignore the watchers and/or C<free ()> them for example).	744	the easiest thing, you can just ignore the watchers and/or C<free ()> them
		745	for example).
596		746
597	Note that certain global state, such as signal state (and installed signal	747	Note that certain global state, such as signal state (and installed signal
598	handlers), will not be freed by this function, and related watchers (such	748	handlers), will not be freed by this function, and related watchers (such
599	as signal and child watchers) would need to be stopped manually.	749	as signal and child watchers) would need to be stopped manually.
600		750
601	In general it is not advisable to call this function except in the	751	This function is normally used on loop objects allocated by
602	rare occasion where you really need to free e.g. the signal handling	752	C<ev_loop_new>, but it can also be used on the default loop returned by
		753	C<ev_default_loop>, in which case it is not thread-safe.
		754
		755	Note that it is not advisable to call this function on the default loop
		756	except in the rare occasion where you really need to free its resources.
603	pipe fds. If you need dynamically allocated loops it is better to use	757	If you need dynamically allocated loops it is better to use C<ev_loop_new>
604	C<ev_loop_new> and C<ev_loop_destroy>.	758	and C<ev_loop_destroy>.
605		759
606	=item ev_loop_destroy (loop)	760	=item ev_loop_fork (loop)
607
608	Like C<ev_default_destroy>, but destroys an event loop created by an
609	earlier call to C<ev_loop_new>.
610
611	=item ev_default_fork ()
612		761
613	This function sets a flag that causes subsequent C<ev_run> iterations	762	This function sets a flag that causes subsequent C<ev_run> iterations
614	to reinitialise the kernel state for backends that have one. Despite the	763	to reinitialise the kernel state for backends that have one. Despite
615	name, you can call it anytime, but it makes most sense after forking, in	764	the name, you can call it anytime you are allowed to start or stop
616	the child process (or both child and parent, but that again makes little	765	watchers (except inside an C<ev_prepare> callback), but it makes most
617	sense). You I<must> call it in the child before using any of the libev	766	sense after forking, in the child process. You I<must> call it (or use
618	functions, and it will only take effect at the next C<ev_run> iteration.	767	C<EVFLAG_FORKCHECK>) in the child before resuming or calling C<ev_run>.
619		768
		769	In addition, if you want to reuse a loop (via this function or
		770	C<EVFLAG_FORKCHECK>), you I<also> have to ignore C<SIGPIPE>.
		771
620	Again, you I<have> to call it on I<any> loop that you want to re-use after	772	Again, you I<have> to call it on I<any> loop that you want to re-use after
621	a fork, I<even if you do not plan to use the loop in the parent>. This is	773	a fork, I<even if you do not plan to use the loop in the parent>. This is
622	because some kernel interfaces *cough* I<kqueue> *cough* do funny things	774	because some kernel interfaces *cough* I<kqueue> *cough* do funny things
623	during fork.	775	during fork.
624		776
625	On the other hand, you only need to call this function in the child	777	On the other hand, you only need to call this function in the child
…		…
628	call it at all (in fact, C<epoll> is so badly broken that it makes a	780	call it at all (in fact, C<epoll> is so badly broken that it makes a
629	difference, but libev will usually detect this case on its own and do a	781	difference, but libev will usually detect this case on its own and do a
630	costly reset of the backend).	782	costly reset of the backend).
631		783
632	The function itself is quite fast and it's usually not a problem to call	784	The function itself is quite fast and it's usually not a problem to call
633	it just in case after a fork. To make this easy, the function will fit in	785	it just in case after a fork.
634	quite nicely into a call to C<pthread_atfork>:
635		786
		787	Example: Automate calling C<ev_loop_fork> on the default loop when
		788	using pthreads.
		789
		790	static void
		791	post_fork_child (void)
		792	{
		793	ev_loop_fork (EV_DEFAULT);
		794	}
		795
		796	...
636	pthread_atfork (0, 0, ev_default_fork);	797	pthread_atfork (0, 0, post_fork_child);
637
638	=item ev_loop_fork (loop)
639
640	Like C<ev_default_fork>, but acts on an event loop created by
641	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
642	after fork that you want to re-use in the child, and how you keep track of
643	them is entirely your own problem.
644		798
645	=item int ev_is_default_loop (loop)	799	=item int ev_is_default_loop (loop)
646		800
647	Returns true when the given loop is, in fact, the default loop, and false	801	Returns true when the given loop is, in fact, the default loop, and false
648	otherwise.	802	otherwise.
…		…
659	prepare and check phases.	813	prepare and check phases.
660		814
661	=item unsigned int ev_depth (loop)	815	=item unsigned int ev_depth (loop)
662		816
663	Returns the number of times C<ev_run> was entered minus the number of	817	Returns the number of times C<ev_run> was entered minus the number of
664	times C<ev_run> was exited, in other words, the recursion depth.	818	times C<ev_run> was exited normally, in other words, the recursion depth.
665		819
666	Outside C<ev_run>, this number is zero. In a callback, this number is	820	Outside C<ev_run>, this number is zero. In a callback, this number is
667	C<1>, unless C<ev_run> was invoked recursively (or from another thread),	821	C<1>, unless C<ev_run> was invoked recursively (or from another thread),
668	in which case it is higher.	822	in which case it is higher.
669		823
670	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread	824	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread,
671	etc.), doesn't count as "exit" - consider this as a hint to avoid such	825	throwing an exception etc.), doesn't count as "exit" - consider this
672	ungentleman-like behaviour unless it's really convenient.	826	as a hint to avoid such ungentleman-like behaviour unless it's really
		827	convenient, in which case it is fully supported.
673		828
674	=item unsigned int ev_backend (loop)	829	=item unsigned int ev_backend (loop)
675		830
676	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	831	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
677	use.	832	use.
…		…
692		847
693	This function is rarely useful, but when some event callback runs for a	848	This function is rarely useful, but when some event callback runs for a
694	very long time without entering the event loop, updating libev's idea of	849	very long time without entering the event loop, updating libev's idea of
695	the current time is a good idea.	850	the current time is a good idea.
696		851
697	See also L<The special problem of time updates> in the C<ev_timer> section.	852	See also L</The special problem of time updates> in the C<ev_timer> section.
698		853
699	=item ev_suspend (loop)	854	=item ev_suspend (loop)
700		855
701	=item ev_resume (loop)	856	=item ev_resume (loop)
702		857
…		…
720	without a previous call to C<ev_suspend>.	875	without a previous call to C<ev_suspend>.
721		876
722	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the	877	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the
723	event loop time (see C<ev_now_update>).	878	event loop time (see C<ev_now_update>).
724		879
725	=item ev_run (loop, int flags)	880	=item bool ev_run (loop, int flags)
726		881
727	Finally, this is it, the event handler. This function usually is called	882	Finally, this is it, the event handler. This function usually is called
728	after you have initialised all your watchers and you want to start	883	after you have initialised all your watchers and you want to start
729	handling events. It will ask the operating system for any new events, call	884	handling events. It will ask the operating system for any new events, call
730	the watcher callbacks, an then repeat the whole process indefinitely: This	885	the watcher callbacks, and then repeat the whole process indefinitely: This
731	is why event loops are called I<loops>.	886	is why event loops are called I<loops>.
732		887
733	If the flags argument is specified as C<0>, it will keep handling events	888	If the flags argument is specified as C<0>, it will keep handling events
734	until either no event watchers are active anymore or C<ev_break> was	889	until either no event watchers are active anymore or C<ev_break> was
735	called.	890	called.
		891
		892	The return value is false if there are no more active watchers (which
		893	usually means "all jobs done" or "deadlock"), and true in all other cases
		894	(which usually means " you should call C<ev_run> again").
736		895
737	Please note that an explicit C<ev_break> is usually better than	896	Please note that an explicit C<ev_break> is usually better than
738	relying on all watchers to be stopped when deciding when a program has	897	relying on all watchers to be stopped when deciding when a program has
739	finished (especially in interactive programs), but having a program	898	finished (especially in interactive programs), but having a program
740	that automatically loops as long as it has to and no longer by virtue	899	that automatically loops as long as it has to and no longer by virtue
741	of relying on its watchers stopping correctly, that is truly a thing of	900	of relying on its watchers stopping correctly, that is truly a thing of
742	beauty.	901	beauty.
743		902
		903	This function is I<mostly> exception-safe - you can break out of a
		904	C<ev_run> call by calling C<longjmp> in a callback, throwing a C++
		905	exception and so on. This does not decrement the C<ev_depth> value, nor
		906	will it clear any outstanding C<EVBREAK_ONE> breaks.
		907
744	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle	908	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle
745	those events and any already outstanding ones, but will not wait and	909	those events and any already outstanding ones, but will not wait and
746	block your process in case there are no events and will return after one	910	block your process in case there are no events and will return after one
747	iteration of the loop. This is sometimes useful to poll and handle new	911	iteration of the loop. This is sometimes useful to poll and handle new
748	events while doing lengthy calculations, to keep the program responsive.	912	events while doing lengthy calculations, to keep the program responsive.
…		…
757	This is useful if you are waiting for some external event in conjunction	921	This is useful if you are waiting for some external event in conjunction
758	with something not expressible using other libev watchers (i.e. "roll your	922	with something not expressible using other libev watchers (i.e. "roll your
759	own C<ev_run>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is	923	own C<ev_run>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is
760	usually a better approach for this kind of thing.	924	usually a better approach for this kind of thing.
761		925
762	Here are the gory details of what C<ev_run> does:	926	Here are the gory details of what C<ev_run> does (this is for your
		927	understanding, not a guarantee that things will work exactly like this in
		928	future versions):
763		929
764	- Increment loop depth.	930	- Increment loop depth.
765	- Reset the ev_break status.	931	- Reset the ev_break status.
766	- Before the first iteration, call any pending watchers.	932	- Before the first iteration, call any pending watchers.
767	LOOP:	933	LOOP:
…		…
800	anymore.	966	anymore.
801		967
802	... queue jobs here, make sure they register event watchers as long	968	... queue jobs here, make sure they register event watchers as long
803	... as they still have work to do (even an idle watcher will do..)	969	... as they still have work to do (even an idle watcher will do..)
804	ev_run (my_loop, 0);	970	ev_run (my_loop, 0);
805	... jobs done or somebody called unloop. yeah!	971	... jobs done or somebody called break. yeah!
806		972
807	=item ev_break (loop, how)	973	=item ev_break (loop, how)
808		974
809	Can be used to make a call to C<ev_run> return early (but only after it	975	Can be used to make a call to C<ev_run> return early (but only after it
810	has processed all outstanding events). The C<how> argument must be either	976	has processed all outstanding events). The C<how> argument must be either
811	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or	977	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or
812	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.	978	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.
813		979
814	This "unloop state" will be cleared when entering C<ev_run> again.	980	This "break state" will be cleared on the next call to C<ev_run>.
815		981
816	It is safe to call C<ev_break> from outside any C<ev_run> calls. ##TODO##	982	It is safe to call C<ev_break> from outside any C<ev_run> calls, too, in
		983	which case it will have no effect.
817		984
818	=item ev_ref (loop)	985	=item ev_ref (loop)
819		986
820	=item ev_unref (loop)	987	=item ev_unref (loop)
821		988
…		…
842	running when nothing else is active.	1009	running when nothing else is active.
843		1010
844	ev_signal exitsig;	1011	ev_signal exitsig;
845	ev_signal_init (&exitsig, sig_cb, SIGINT);	1012	ev_signal_init (&exitsig, sig_cb, SIGINT);
846	ev_signal_start (loop, &exitsig);	1013	ev_signal_start (loop, &exitsig);
847	evf_unref (loop);	1014	ev_unref (loop);
848		1015
849	Example: For some weird reason, unregister the above signal handler again.	1016	Example: For some weird reason, unregister the above signal handler again.
850		1017
851	ev_ref (loop);	1018	ev_ref (loop);
852	ev_signal_stop (loop, &exitsig);	1019	ev_signal_stop (loop, &exitsig);
…		…
872	overhead for the actual polling but can deliver many events at once.	1039	overhead for the actual polling but can deliver many events at once.
873		1040
874	By setting a higher I<io collect interval> you allow libev to spend more	1041	By setting a higher I<io collect interval> you allow libev to spend more
875	time collecting I/O events, so you can handle more events per iteration,	1042	time collecting I/O events, so you can handle more events per iteration,
876	at the cost of increasing latency. Timeouts (both C<ev_periodic> and	1043	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
877	C<ev_timer>) will be not affected. Setting this to a non-null value will	1044	C<ev_timer>) will not be affected. Setting this to a non-null value will
878	introduce an additional C<ev_sleep ()> call into most loop iterations. The	1045	introduce an additional C<ev_sleep ()> call into most loop iterations. The
879	sleep time ensures that libev will not poll for I/O events more often then	1046	sleep time ensures that libev will not poll for I/O events more often then
880	once per this interval, on average.	1047	once per this interval, on average (as long as the host time resolution is
		1048	good enough).
881		1049
882	Likewise, by setting a higher I<timeout collect interval> you allow libev	1050	Likewise, by setting a higher I<timeout collect interval> you allow libev
883	to spend more time collecting timeouts, at the expense of increased	1051	to spend more time collecting timeouts, at the expense of increased
884	latency/jitter/inexactness (the watcher callback will be called	1052	latency/jitter/inexactness (the watcher callback will be called
885	later). C<ev_io> watchers will not be affected. Setting this to a non-null	1053	later). C<ev_io> watchers will not be affected. Setting this to a non-null
…		…
931	invoke the actual watchers inside another context (another thread etc.).	1099	invoke the actual watchers inside another context (another thread etc.).
932		1100
933	If you want to reset the callback, use C<ev_invoke_pending> as new	1101	If you want to reset the callback, use C<ev_invoke_pending> as new
934	callback.	1102	callback.
935		1103
936	=item ev_set_loop_release_cb (loop, void (*release)(EV_P), void (*acquire)(EV_P))	1104	=item ev_set_loop_release_cb (loop, void (*release)(EV_P) throw (), void (*acquire)(EV_P) throw ())
937		1105
938	Sometimes you want to share the same loop between multiple threads. This	1106	Sometimes you want to share the same loop between multiple threads. This
939	can be done relatively simply by putting mutex_lock/unlock calls around	1107	can be done relatively simply by putting mutex_lock/unlock calls around
940	each call to a libev function.	1108	each call to a libev function.
941		1109
942	However, C<ev_run> can run an indefinite time, so it is not feasible	1110	However, C<ev_run> can run an indefinite time, so it is not feasible
943	to wait for it to return. One way around this is to wake up the event	1111	to wait for it to return. One way around this is to wake up the event
944	loop via C<ev_break> and C<av_async_send>, another way is to set these	1112	loop via C<ev_break> and C<ev_async_send>, another way is to set these
945	I<release> and I<acquire> callbacks on the loop.	1113	I<release> and I<acquire> callbacks on the loop.
946		1114
947	When set, then C<release> will be called just before the thread is	1115	When set, then C<release> will be called just before the thread is
948	suspended waiting for new events, and C<acquire> is called just	1116	suspended waiting for new events, and C<acquire> is called just
949	afterwards.	1117	afterwards.
…		…
964	See also the locking example in the C<THREADS> section later in this	1132	See also the locking example in the C<THREADS> section later in this
965	document.	1133	document.
966		1134
967	=item ev_set_userdata (loop, void *data)	1135	=item ev_set_userdata (loop, void *data)
968		1136
969	=item ev_userdata (loop)	1137	=item void *ev_userdata (loop)
970		1138
971	Set and retrieve a single C<void *> associated with a loop. When	1139	Set and retrieve a single C<void *> associated with a loop. When
972	C<ev_set_userdata> has never been called, then C<ev_userdata> returns	1140	C<ev_set_userdata> has never been called, then C<ev_userdata> returns
973	C<0.>	1141	C<0>.
974		1142
975	These two functions can be used to associate arbitrary data with a loop,	1143	These two functions can be used to associate arbitrary data with a loop,
976	and are intended solely for the C<invoke_pending_cb>, C<release> and	1144	and are intended solely for the C<invoke_pending_cb>, C<release> and
977	C<acquire> callbacks described above, but of course can be (ab-)used for	1145	C<acquire> callbacks described above, but of course can be (ab-)used for
978	any other purpose as well.	1146	any other purpose as well.
…		…
1089		1257
1090	=item C<EV_PREPARE>	1258	=item C<EV_PREPARE>
1091		1259
1092	=item C<EV_CHECK>	1260	=item C<EV_CHECK>
1093		1261
1094	All C<ev_prepare> watchers are invoked just I<before> C<ev_run> starts	1262	All C<ev_prepare> watchers are invoked just I<before> C<ev_run> starts to
1095	to gather new events, and all C<ev_check> watchers are invoked just after	1263	gather new events, and all C<ev_check> watchers are queued (not invoked)
1096	C<ev_run> has gathered them, but before it invokes any callbacks for any	1264	just after C<ev_run> has gathered them, but before it queues any callbacks
		1265	for any received events. That means C<ev_prepare> watchers are the last
		1266	watchers invoked before the event loop sleeps or polls for new events, and
		1267	C<ev_check> watchers will be invoked before any other watchers of the same
		1268	or lower priority within an event loop iteration.
		1269
1097	received events. Callbacks of both watcher types can start and stop as	1270	Callbacks of both watcher types can start and stop as many watchers as
1098	many watchers as they want, and all of them will be taken into account	1271	they want, and all of them will be taken into account (for example, a
1099	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	1272	C<ev_prepare> watcher might start an idle watcher to keep C<ev_run> from
1100	C<ev_run> from blocking).	1273	blocking).
1101		1274
1102	=item C<EV_EMBED>	1275	=item C<EV_EMBED>
1103		1276
1104	The embedded event loop specified in the C<ev_embed> watcher needs attention.	1277	The embedded event loop specified in the C<ev_embed> watcher needs attention.
1105		1278
1106	=item C<EV_FORK>	1279	=item C<EV_FORK>
1107		1280
1108	The event loop has been resumed in the child process after fork (see	1281	The event loop has been resumed in the child process after fork (see
1109	C<ev_fork>).	1282	C<ev_fork>).
		1283
		1284	=item C<EV_CLEANUP>
		1285
		1286	The event loop is about to be destroyed (see C<ev_cleanup>).
1110		1287
1111	=item C<EV_ASYNC>	1288	=item C<EV_ASYNC>
1112		1289
1113	The given async watcher has been asynchronously notified (see C<ev_async>).	1290	The given async watcher has been asynchronously notified (see C<ev_async>).
1114		1291
…		…
1136	programs, though, as the fd could already be closed and reused for another	1313	programs, though, as the fd could already be closed and reused for another
1137	thing, so beware.	1314	thing, so beware.
1138		1315
1139	=back	1316	=back
1140		1317
		1318	=head2 GENERIC WATCHER FUNCTIONS
		1319
		1320	=over 4
		1321
		1322	=item C<ev_init> (ev_TYPE *watcher, callback)
		1323
		1324	This macro initialises the generic portion of a watcher. The contents
		1325	of the watcher object can be arbitrary (so C<malloc> will do). Only
		1326	the generic parts of the watcher are initialised, you I<need> to call
		1327	the type-specific C<ev_TYPE_set> macro afterwards to initialise the
		1328	type-specific parts. For each type there is also a C<ev_TYPE_init> macro
		1329	which rolls both calls into one.
		1330
		1331	You can reinitialise a watcher at any time as long as it has been stopped
		1332	(or never started) and there are no pending events outstanding.
		1333
		1334	The callback is always of type C<void (*)(struct ev_loop *loop, ev_TYPE *watcher,
		1335	int revents)>.
		1336
		1337	Example: Initialise an C<ev_io> watcher in two steps.
		1338
		1339	ev_io w;
		1340	ev_init (&w, my_cb);
		1341	ev_io_set (&w, STDIN_FILENO, EV_READ);
		1342
		1343	=item C<ev_TYPE_set> (ev_TYPE *watcher, [args])
		1344
		1345	This macro initialises the type-specific parts of a watcher. You need to
		1346	call C<ev_init> at least once before you call this macro, but you can
		1347	call C<ev_TYPE_set> any number of times. You must not, however, call this
		1348	macro on a watcher that is active (it can be pending, however, which is a
		1349	difference to the C<ev_init> macro).
		1350
		1351	Although some watcher types do not have type-specific arguments
		1352	(e.g. C<ev_prepare>) you still need to call its C<set> macro.
		1353
		1354	See C<ev_init>, above, for an example.
		1355
		1356	=item C<ev_TYPE_init> (ev_TYPE *watcher, callback, [args])
		1357
		1358	This convenience macro rolls both C<ev_init> and C<ev_TYPE_set> macro
		1359	calls into a single call. This is the most convenient method to initialise
		1360	a watcher. The same limitations apply, of course.
		1361
		1362	Example: Initialise and set an C<ev_io> watcher in one step.
		1363
		1364	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);
		1365
		1366	=item C<ev_TYPE_start> (loop, ev_TYPE *watcher)
		1367
		1368	Starts (activates) the given watcher. Only active watchers will receive
		1369	events. If the watcher is already active nothing will happen.
		1370
		1371	Example: Start the C<ev_io> watcher that is being abused as example in this
		1372	whole section.
		1373
		1374	ev_io_start (EV_DEFAULT_UC, &w);
		1375
		1376	=item C<ev_TYPE_stop> (loop, ev_TYPE *watcher)
		1377
		1378	Stops the given watcher if active, and clears the pending status (whether
		1379	the watcher was active or not).
		1380
		1381	It is possible that stopped watchers are pending - for example,
		1382	non-repeating timers are being stopped when they become pending - but
		1383	calling C<ev_TYPE_stop> ensures that the watcher is neither active nor
		1384	pending. If you want to free or reuse the memory used by the watcher it is
		1385	therefore a good idea to always call its C<ev_TYPE_stop> function.
		1386
		1387	=item bool ev_is_active (ev_TYPE *watcher)
		1388
		1389	Returns a true value iff the watcher is active (i.e. it has been started
		1390	and not yet been stopped). As long as a watcher is active you must not modify
		1391	it.
		1392
		1393	=item bool ev_is_pending (ev_TYPE *watcher)
		1394
		1395	Returns a true value iff the watcher is pending, (i.e. it has outstanding
		1396	events but its callback has not yet been invoked). As long as a watcher
		1397	is pending (but not active) you must not call an init function on it (but
		1398	C<ev_TYPE_set> is safe), you must not change its priority, and you must
		1399	make sure the watcher is available to libev (e.g. you cannot C<free ()>
		1400	it).
		1401
		1402	=item callback ev_cb (ev_TYPE *watcher)
		1403
		1404	Returns the callback currently set on the watcher.
		1405
		1406	=item ev_set_cb (ev_TYPE *watcher, callback)
		1407
		1408	Change the callback. You can change the callback at virtually any time
		1409	(modulo threads).
		1410
		1411	=item ev_set_priority (ev_TYPE *watcher, int priority)
		1412
		1413	=item int ev_priority (ev_TYPE *watcher)
		1414
		1415	Set and query the priority of the watcher. The priority is a small
		1416	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
		1417	(default: C<-2>). Pending watchers with higher priority will be invoked
		1418	before watchers with lower priority, but priority will not keep watchers
		1419	from being executed (except for C<ev_idle> watchers).
		1420
		1421	If you need to suppress invocation when higher priority events are pending
		1422	you need to look at C<ev_idle> watchers, which provide this functionality.
		1423
		1424	You I<must not> change the priority of a watcher as long as it is active or
		1425	pending.
		1426
		1427	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is
		1428	fine, as long as you do not mind that the priority value you query might
		1429	or might not have been clamped to the valid range.
		1430
		1431	The default priority used by watchers when no priority has been set is
		1432	always C<0>, which is supposed to not be too high and not be too low :).
		1433
		1434	See L</WATCHER PRIORITY MODELS>, below, for a more thorough treatment of
		1435	priorities.
		1436
		1437	=item ev_invoke (loop, ev_TYPE *watcher, int revents)
		1438
		1439	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
		1440	C<loop> nor C<revents> need to be valid as long as the watcher callback
		1441	can deal with that fact, as both are simply passed through to the
		1442	callback.
		1443
		1444	=item int ev_clear_pending (loop, ev_TYPE *watcher)
		1445
		1446	If the watcher is pending, this function clears its pending status and
		1447	returns its C<revents> bitset (as if its callback was invoked). If the
		1448	watcher isn't pending it does nothing and returns C<0>.
		1449
		1450	Sometimes it can be useful to "poll" a watcher instead of waiting for its
		1451	callback to be invoked, which can be accomplished with this function.
		1452
		1453	=item ev_feed_event (loop, ev_TYPE *watcher, int revents)
		1454
		1455	Feeds the given event set into the event loop, as if the specified event
		1456	had happened for the specified watcher (which must be a pointer to an
		1457	initialised but not necessarily started event watcher). Obviously you must
		1458	not free the watcher as long as it has pending events.
		1459
		1460	Stopping the watcher, letting libev invoke it, or calling
		1461	C<ev_clear_pending> will clear the pending event, even if the watcher was
		1462	not started in the first place.
		1463
		1464	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
		1465	functions that do not need a watcher.
		1466
		1467	=back
		1468
		1469	See also the L</ASSOCIATING CUSTOM DATA WITH A WATCHER> and L</BUILDING YOUR
		1470	OWN COMPOSITE WATCHERS> idioms.
		1471
1141	=head2 WATCHER STATES	1472	=head2 WATCHER STATES
1142		1473
1143	There are various watcher states mentioned throughout this manual -	1474	There are various watcher states mentioned throughout this manual -
1144	active, pending and so on. In this section these states and the rules to	1475	active, pending and so on. In this section these states and the rules to
1145	transition between them will be described in more detail - and while these	1476	transition between them will be described in more detail - and while these
1146	rules might look complicated, they usually do "the right thing".	1477	rules might look complicated, they usually do "the right thing".
1147		1478
1148	=over 4	1479	=over 4
1149		1480
1150	=item initialiased	1481	=item initialised
1151		1482
1152	Before a watcher can be registered with the event looop it has to be	1483	Before a watcher can be registered with the event loop it has to be
1153	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to	1484	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
1154	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.	1485	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
1155		1486
1156	In this state it is simply some block of memory that is suitable for use	1487	In this state it is simply some block of memory that is suitable for
1157	in an event loop. It can be moved around, freed, reused etc. at will.	1488	use in an event loop. It can be moved around, freed, reused etc. at
		1489	will - as long as you either keep the memory contents intact, or call
		1490	C<ev_TYPE_init> again.
1158		1491
1159	=item started/running/active	1492	=item started/running/active
1160		1493
1161	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes	1494	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
1162	property of the event loop, and is actively waiting for events. While in	1495	property of the event loop, and is actively waiting for events. While in
…		…
1190	latter will clear any pending state the watcher might be in, regardless	1523	latter will clear any pending state the watcher might be in, regardless
1191	of whether it was active or not, so stopping a watcher explicitly before	1524	of whether it was active or not, so stopping a watcher explicitly before
1192	freeing it is often a good idea.	1525	freeing it is often a good idea.
1193		1526
1194	While stopped (and not pending) the watcher is essentially in the	1527	While stopped (and not pending) the watcher is essentially in the
1195	initialised state, that is it can be reused, moved, modified in any way	1528	initialised state, that is, it can be reused, moved, modified in any way
1196	you wish.	1529	you wish (but when you trash the memory block, you need to C<ev_TYPE_init>
		1530	it again).
1197		1531
1198	=back	1532	=back
1199
1200	=head2 GENERIC WATCHER FUNCTIONS
1201
1202	=over 4
1203
1204	=item C<ev_init> (ev_TYPE *watcher, callback)
1205
1206	This macro initialises the generic portion of a watcher. The contents
1207	of the watcher object can be arbitrary (so C<malloc> will do). Only
1208	the generic parts of the watcher are initialised, you I<need> to call
1209	the type-specific C<ev_TYPE_set> macro afterwards to initialise the
1210	type-specific parts. For each type there is also a C<ev_TYPE_init> macro
1211	which rolls both calls into one.
1212
1213	You can reinitialise a watcher at any time as long as it has been stopped
1214	(or never started) and there are no pending events outstanding.
1215
1216	The callback is always of type C<void (*)(struct ev_loop *loop, ev_TYPE *watcher,
1217	int revents)>.
1218
1219	Example: Initialise an C<ev_io> watcher in two steps.
1220
1221	ev_io w;
1222	ev_init (&w, my_cb);
1223	ev_io_set (&w, STDIN_FILENO, EV_READ);
1224
1225	=item C<ev_TYPE_set> (ev_TYPE *watcher, [args])
1226
1227	This macro initialises the type-specific parts of a watcher. You need to
1228	call C<ev_init> at least once before you call this macro, but you can
1229	call C<ev_TYPE_set> any number of times. You must not, however, call this
1230	macro on a watcher that is active (it can be pending, however, which is a
1231	difference to the C<ev_init> macro).
1232
1233	Although some watcher types do not have type-specific arguments
1234	(e.g. C<ev_prepare>) you still need to call its C<set> macro.
1235
1236	See C<ev_init>, above, for an example.
1237
1238	=item C<ev_TYPE_init> (ev_TYPE *watcher, callback, [args])
1239
1240	This convenience macro rolls both C<ev_init> and C<ev_TYPE_set> macro
1241	calls into a single call. This is the most convenient method to initialise
1242	a watcher. The same limitations apply, of course.
1243
1244	Example: Initialise and set an C<ev_io> watcher in one step.
1245
1246	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);
1247
1248	=item C<ev_TYPE_start> (loop, ev_TYPE *watcher)
1249
1250	Starts (activates) the given watcher. Only active watchers will receive
1251	events. If the watcher is already active nothing will happen.
1252
1253	Example: Start the C<ev_io> watcher that is being abused as example in this
1254	whole section.
1255
1256	ev_io_start (EV_DEFAULT_UC, &w);
1257
1258	=item C<ev_TYPE_stop> (loop, ev_TYPE *watcher)
1259
1260	Stops the given watcher if active, and clears the pending status (whether
1261	the watcher was active or not).
1262
1263	It is possible that stopped watchers are pending - for example,
1264	non-repeating timers are being stopped when they become pending - but
1265	calling C<ev_TYPE_stop> ensures that the watcher is neither active nor
1266	pending. If you want to free or reuse the memory used by the watcher it is
1267	therefore a good idea to always call its C<ev_TYPE_stop> function.
1268
1269	=item bool ev_is_active (ev_TYPE *watcher)
1270
1271	Returns a true value iff the watcher is active (i.e. it has been started
1272	and not yet been stopped). As long as a watcher is active you must not modify
1273	it.
1274
1275	=item bool ev_is_pending (ev_TYPE *watcher)
1276
1277	Returns a true value iff the watcher is pending, (i.e. it has outstanding
1278	events but its callback has not yet been invoked). As long as a watcher
1279	is pending (but not active) you must not call an init function on it (but
1280	C<ev_TYPE_set> is safe), you must not change its priority, and you must
1281	make sure the watcher is available to libev (e.g. you cannot C<free ()>
1282	it).
1283
1284	=item callback ev_cb (ev_TYPE *watcher)
1285
1286	Returns the callback currently set on the watcher.
1287
1288	=item ev_cb_set (ev_TYPE *watcher, callback)
1289
1290	Change the callback. You can change the callback at virtually any time
1291	(modulo threads).
1292
1293	=item ev_set_priority (ev_TYPE *watcher, int priority)
1294
1295	=item int ev_priority (ev_TYPE *watcher)
1296
1297	Set and query the priority of the watcher. The priority is a small
1298	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
1299	(default: C<-2>). Pending watchers with higher priority will be invoked
1300	before watchers with lower priority, but priority will not keep watchers
1301	from being executed (except for C<ev_idle> watchers).
1302
1303	If you need to suppress invocation when higher priority events are pending
1304	you need to look at C<ev_idle> watchers, which provide this functionality.
1305
1306	You I<must not> change the priority of a watcher as long as it is active or
1307	pending.
1308
1309	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is
1310	fine, as long as you do not mind that the priority value you query might
1311	or might not have been clamped to the valid range.
1312
1313	The default priority used by watchers when no priority has been set is
1314	always C<0>, which is supposed to not be too high and not be too low :).
1315
1316	See L<WATCHER PRIORITY MODELS>, below, for a more thorough treatment of
1317	priorities.
1318
1319	=item ev_invoke (loop, ev_TYPE *watcher, int revents)
1320
1321	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
1322	C<loop> nor C<revents> need to be valid as long as the watcher callback
1323	can deal with that fact, as both are simply passed through to the
1324	callback.
1325
1326	=item int ev_clear_pending (loop, ev_TYPE *watcher)
1327
1328	If the watcher is pending, this function clears its pending status and
1329	returns its C<revents> bitset (as if its callback was invoked). If the
1330	watcher isn't pending it does nothing and returns C<0>.
1331
1332	Sometimes it can be useful to "poll" a watcher instead of waiting for its
1333	callback to be invoked, which can be accomplished with this function.
1334
1335	=item ev_feed_event (loop, ev_TYPE *watcher, int revents)
1336
1337	Feeds the given event set into the event loop, as if the specified event
1338	had happened for the specified watcher (which must be a pointer to an
1339	initialised but not necessarily started event watcher). Obviously you must
1340	not free the watcher as long as it has pending events.
1341
1342	Stopping the watcher, letting libev invoke it, or calling
1343	C<ev_clear_pending> will clear the pending event, even if the watcher was
1344	not started in the first place.
1345
1346	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
1347	functions that do not need a watcher.
1348
1349	=back
1350
1351
1352	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
1353
1354	Each watcher has, by default, a member C<void *data> that you can change
1355	and read at any time: libev will completely ignore it. This can be used
1356	to associate arbitrary data with your watcher. If you need more data and
1357	don't want to allocate memory and store a pointer to it in that data
1358	member, you can also "subclass" the watcher type and provide your own
1359	data:
1360
1361	struct my_io
1362	{
1363	ev_io io;
1364	int otherfd;
1365	void *somedata;
1366	struct whatever *mostinteresting;
1367	};
1368
1369	...
1370	struct my_io w;
1371	ev_io_init (&w.io, my_cb, fd, EV_READ);
1372
1373	And since your callback will be called with a pointer to the watcher, you
1374	can cast it back to your own type:
1375
1376	static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)
1377	{
1378	struct my_io *w = (struct my_io *)w_;
1379	...
1380	}
1381
1382	More interesting and less C-conformant ways of casting your callback type
1383	instead have been omitted.
1384
1385	Another common scenario is to use some data structure with multiple
1386	embedded watchers:
1387
1388	struct my_biggy
1389	{
1390	int some_data;
1391	ev_timer t1;
1392	ev_timer t2;
1393	}
1394
1395	In this case getting the pointer to C<my_biggy> is a bit more
1396	complicated: Either you store the address of your C<my_biggy> struct
1397	in the C<data> member of the watcher (for woozies), or you need to use
1398	some pointer arithmetic using C<offsetof> inside your watchers (for real
1399	programmers):
1400
1401	#include <stddef.h>
1402
1403	static void
1404	t1_cb (EV_P_ ev_timer *w, int revents)
1405	{
1406	struct my_biggy big = (struct my_biggy *)
1407	(((char *)w) - offsetof (struct my_biggy, t1));
1408	}
1409
1410	static void
1411	t2_cb (EV_P_ ev_timer *w, int revents)
1412	{
1413	struct my_biggy big = (struct my_biggy *)
1414	(((char *)w) - offsetof (struct my_biggy, t2));
1415	}
1416		1533
1417	=head2 WATCHER PRIORITY MODELS	1534	=head2 WATCHER PRIORITY MODELS
1418		1535
1419	Many event loops support I<watcher priorities>, which are usually small	1536	Many event loops support I<watcher priorities>, which are usually small
1420	integers that influence the ordering of event callback invocation	1537	integers that influence the ordering of event callback invocation
…		…
1547	In general you can register as many read and/or write event watchers per	1664	In general you can register as many read and/or write event watchers per
1548	fd as you want (as long as you don't confuse yourself). Setting all file	1665	fd as you want (as long as you don't confuse yourself). Setting all file
1549	descriptors to non-blocking mode is also usually a good idea (but not	1666	descriptors to non-blocking mode is also usually a good idea (but not
1550	required if you know what you are doing).	1667	required if you know what you are doing).
1551		1668
1552	If you cannot use non-blocking mode, then force the use of a
1553	known-to-be-good backend (at the time of this writing, this includes only
1554	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>). The same applies to file
1555	descriptors for which non-blocking operation makes no sense (such as
1556	files) - libev doesn't guarantee any specific behaviour in that case.
1557
1558	Another thing you have to watch out for is that it is quite easy to	1669	Another thing you have to watch out for is that it is quite easy to
1559	receive "spurious" readiness notifications, that is your callback might	1670	receive "spurious" readiness notifications, that is, your callback might
1560	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1671	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
1561	because there is no data. Not only are some backends known to create a	1672	because there is no data. It is very easy to get into this situation even
1562	lot of those (for example Solaris ports), it is very easy to get into	1673	with a relatively standard program structure. Thus it is best to always
1563	this situation even with a relatively standard program structure. Thus	1674	use non-blocking I/O: An extra C<read>(2) returning C<EAGAIN> is far
1564	it is best to always use non-blocking I/O: An extra C<read>(2) returning
1565	C<EAGAIN> is far preferable to a program hanging until some data arrives.	1675	preferable to a program hanging until some data arrives.
1566		1676
1567	If you cannot run the fd in non-blocking mode (for example you should	1677	If you cannot run the fd in non-blocking mode (for example you should
1568	not play around with an Xlib connection), then you have to separately	1678	not play around with an Xlib connection), then you have to separately
1569	re-test whether a file descriptor is really ready with a known-to-be good	1679	re-test whether a file descriptor is really ready with a known-to-be good
1570	interface such as poll (fortunately in our Xlib example, Xlib already	1680	interface such as poll (fortunately in the case of Xlib, it already does
1571	does this on its own, so its quite safe to use). Some people additionally	1681	this on its own, so its quite safe to use). Some people additionally
1572	use C<SIGALRM> and an interval timer, just to be sure you won't block	1682	use C<SIGALRM> and an interval timer, just to be sure you won't block
1573	indefinitely.	1683	indefinitely.
1574		1684
1575	But really, best use non-blocking mode.	1685	But really, best use non-blocking mode.
1576		1686
1577	=head3 The special problem of disappearing file descriptors	1687	=head3 The special problem of disappearing file descriptors
1578		1688
1579	Some backends (e.g. kqueue, epoll) need to be told about closing a file	1689	Some backends (e.g. kqueue, epoll, linuxaio) need to be told about closing
1580	descriptor (either due to calling C<close> explicitly or any other means,	1690	a file descriptor (either due to calling C<close> explicitly or any other
1581	such as C<dup2>). The reason is that you register interest in some file	1691	means, such as C<dup2>). The reason is that you register interest in some
1582	descriptor, but when it goes away, the operating system will silently drop	1692	file descriptor, but when it goes away, the operating system will silently
1583	this interest. If another file descriptor with the same number then is	1693	drop this interest. If another file descriptor with the same number then
1584	registered with libev, there is no efficient way to see that this is, in	1694	is registered with libev, there is no efficient way to see that this is,
1585	fact, a different file descriptor.	1695	in fact, a different file descriptor.
1586		1696
1587	To avoid having to explicitly tell libev about such cases, libev follows	1697	To avoid having to explicitly tell libev about such cases, libev follows
1588	the following policy: Each time C<ev_io_set> is being called, libev	1698	the following policy: Each time C<ev_io_set> is being called, libev
1589	will assume that this is potentially a new file descriptor, otherwise	1699	will assume that this is potentially a new file descriptor, otherwise
1590	it is assumed that the file descriptor stays the same. That means that	1700	it is assumed that the file descriptor stays the same. That means that
…		…
1604		1714
1605	There is no workaround possible except not registering events	1715	There is no workaround possible except not registering events
1606	for potentially C<dup ()>'ed file descriptors, or to resort to	1716	for potentially C<dup ()>'ed file descriptors, or to resort to
1607	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.	1717	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1608		1718
		1719	=head3 The special problem of files
		1720
		1721	Many people try to use C<select> (or libev) on file descriptors
		1722	representing files, and expect it to become ready when their program
		1723	doesn't block on disk accesses (which can take a long time on their own).
		1724
		1725	However, this cannot ever work in the "expected" way - you get a readiness
		1726	notification as soon as the kernel knows whether and how much data is
		1727	there, and in the case of open files, that's always the case, so you
		1728	always get a readiness notification instantly, and your read (or possibly
		1729	write) will still block on the disk I/O.
		1730
		1731	Another way to view it is that in the case of sockets, pipes, character
		1732	devices and so on, there is another party (the sender) that delivers data
		1733	on its own, but in the case of files, there is no such thing: the disk
		1734	will not send data on its own, simply because it doesn't know what you
		1735	wish to read - you would first have to request some data.
		1736
		1737	Since files are typically not-so-well supported by advanced notification
		1738	mechanism, libev tries hard to emulate POSIX behaviour with respect
		1739	to files, even though you should not use it. The reason for this is
		1740	convenience: sometimes you want to watch STDIN or STDOUT, which is
		1741	usually a tty, often a pipe, but also sometimes files or special devices
		1742	(for example, C<epoll> on Linux works with F</dev/random> but not with
		1743	F</dev/urandom>), and even though the file might better be served with
		1744	asynchronous I/O instead of with non-blocking I/O, it is still useful when
		1745	it "just works" instead of freezing.
		1746
		1747	So avoid file descriptors pointing to files when you know it (e.g. use
		1748	libeio), but use them when it is convenient, e.g. for STDIN/STDOUT, or
		1749	when you rarely read from a file instead of from a socket, and want to
		1750	reuse the same code path.
		1751
1609	=head3 The special problem of fork	1752	=head3 The special problem of fork
1610		1753
1611	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit	1754	Some backends (epoll, kqueue, probably linuxaio) do not support C<fork ()>
1612	useless behaviour. Libev fully supports fork, but needs to be told about	1755	at all or exhibit useless behaviour. Libev fully supports fork, but needs
1613	it in the child.	1756	to be told about it in the child if you want to continue to use it in the
		1757	child.
1614		1758
1615	To support fork in your programs, you either have to call	1759	To support fork in your child processes, you have to call C<ev_loop_fork
1616	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,	1760	()> after a fork in the child, enable C<EVFLAG_FORKCHECK>, or resort to
1617	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or	1761	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1618	C<EVBACKEND_POLL>.
1619		1762
1620	=head3 The special problem of SIGPIPE	1763	=head3 The special problem of SIGPIPE
1621		1764
1622	While not really specific to libev, it is easy to forget about C<SIGPIPE>:	1765	While not really specific to libev, it is easy to forget about C<SIGPIPE>:
1623	when writing to a pipe whose other end has been closed, your program gets	1766	when writing to a pipe whose other end has been closed, your program gets
…		…
1721	detecting time jumps is hard, and some inaccuracies are unavoidable (the	1864	detecting time jumps is hard, and some inaccuracies are unavoidable (the
1722	monotonic clock option helps a lot here).	1865	monotonic clock option helps a lot here).
1723		1866
1724	The callback is guaranteed to be invoked only I<after> its timeout has	1867	The callback is guaranteed to be invoked only I<after> its timeout has
1725	passed (not I<at>, so on systems with very low-resolution clocks this	1868	passed (not I<at>, so on systems with very low-resolution clocks this
1726	might introduce a small delay). If multiple timers become ready during the	1869	might introduce a small delay, see "the special problem of being too
		1870	early", below). If multiple timers become ready during the same loop
1727	same loop iteration then the ones with earlier time-out values are invoked	1871	iteration then the ones with earlier time-out values are invoked before
1728	before ones of the same priority with later time-out values (but this is	1872	ones of the same priority with later time-out values (but this is no
1729	no longer true when a callback calls C<ev_run> recursively).	1873	longer true when a callback calls C<ev_run> recursively).
1730		1874
1731	=head3 Be smart about timeouts	1875	=head3 Be smart about timeouts
1732		1876
1733	Many real-world problems involve some kind of timeout, usually for error	1877	Many real-world problems involve some kind of timeout, usually for error
1734	recovery. A typical example is an HTTP request - if the other side hangs,	1878	recovery. A typical example is an HTTP request - if the other side hangs,
…		…
1809		1953
1810	In this case, it would be more efficient to leave the C<ev_timer> alone,	1954	In this case, it would be more efficient to leave the C<ev_timer> alone,
1811	but remember the time of last activity, and check for a real timeout only	1955	but remember the time of last activity, and check for a real timeout only
1812	within the callback:	1956	within the callback:
1813		1957
		1958	ev_tstamp timeout = 60.;
1814	ev_tstamp last_activity; // time of last activity	1959	ev_tstamp last_activity; // time of last activity
		1960	ev_timer timer;
1815		1961
1816	static void	1962	static void
1817	callback (EV_P_ ev_timer *w, int revents)	1963	callback (EV_P_ ev_timer *w, int revents)
1818	{	1964	{
1819	ev_tstamp now = ev_now (EV_A);	1965	// calculate when the timeout would happen
1820	ev_tstamp timeout = last_activity + 60.;	1966	ev_tstamp after = last_activity - ev_now (EV_A) + timeout;
1821		1967
1822	// if last_activity + 60. is older than now, we did time out	1968	// if negative, it means we the timeout already occurred
1823	if (timeout < now)	1969	if (after < 0.)
1824	{	1970	{
1825	// timeout occurred, take action	1971	// timeout occurred, take action
1826	}	1972	}
1827	else	1973	else
1828	{	1974	{
1829	// callback was invoked, but there was some activity, re-arm	1975	// callback was invoked, but there was some recent
1830	// the watcher to fire in last_activity + 60, which is	1976	// activity. simply restart the timer to time out
1831	// guaranteed to be in the future, so "again" is positive:	1977	// after "after" seconds, which is the earliest time
1832	w->repeat = timeout - now;	1978	// the timeout can occur.
		1979	ev_timer_set (w, after, 0.);
1833	ev_timer_again (EV_A_ w);	1980	ev_timer_start (EV_A_ w);
1834	}	1981	}
1835	}	1982	}
1836		1983
1837	To summarise the callback: first calculate the real timeout (defined	1984	To summarise the callback: first calculate in how many seconds the
1838	as "60 seconds after the last activity"), then check if that time has	1985	timeout will occur (by calculating the absolute time when it would occur,
1839	been reached, which means something I<did>, in fact, time out. Otherwise	1986	C<last_activity + timeout>, and subtracting the current time, C<ev_now
1840	the callback was invoked too early (C<timeout> is in the future), so	1987	(EV_A)> from that).
1841	re-schedule the timer to fire at that future time, to see if maybe we have
1842	a timeout then.
1843		1988
1844	Note how C<ev_timer_again> is used, taking advantage of the	1989	If this value is negative, then we are already past the timeout, i.e. we
1845	C<ev_timer_again> optimisation when the timer is already running.	1990	timed out, and need to do whatever is needed in this case.
		1991
		1992	Otherwise, we now the earliest time at which the timeout would trigger,
		1993	and simply start the timer with this timeout value.
		1994
		1995	In other words, each time the callback is invoked it will check whether
		1996	the timeout occurred. If not, it will simply reschedule itself to check
		1997	again at the earliest time it could time out. Rinse. Repeat.
1846		1998
1847	This scheme causes more callback invocations (about one every 60 seconds	1999	This scheme causes more callback invocations (about one every 60 seconds
1848	minus half the average time between activity), but virtually no calls to	2000	minus half the average time between activity), but virtually no calls to
1849	libev to change the timeout.	2001	libev to change the timeout.
1850		2002
1851	To start the timer, simply initialise the watcher and set C<last_activity>	2003	To start the machinery, simply initialise the watcher and set
1852	to the current time (meaning we just have some activity :), then call the	2004	C<last_activity> to the current time (meaning there was some activity just
1853	callback, which will "do the right thing" and start the timer:	2005	now), then call the callback, which will "do the right thing" and start
		2006	the timer:
1854		2007
		2008	last_activity = ev_now (EV_A);
1855	ev_init (timer, callback);	2009	ev_init (&timer, callback);
1856	last_activity = ev_now (loop);	2010	callback (EV_A_ &timer, 0);
1857	callback (loop, timer, EV_TIMER);
1858		2011
1859	And when there is some activity, simply store the current time in	2012	When there is some activity, simply store the current time in
1860	C<last_activity>, no libev calls at all:	2013	C<last_activity>, no libev calls at all:
1861		2014
		2015	if (activity detected)
1862	last_activity = ev_now (loop);	2016	last_activity = ev_now (EV_A);
		2017
		2018	When your timeout value changes, then the timeout can be changed by simply
		2019	providing a new value, stopping the timer and calling the callback, which
		2020	will again do the right thing (for example, time out immediately :).
		2021
		2022	timeout = new_value;
		2023	ev_timer_stop (EV_A_ &timer);
		2024	callback (EV_A_ &timer, 0);
1863		2025
1864	This technique is slightly more complex, but in most cases where the	2026	This technique is slightly more complex, but in most cases where the
1865	time-out is unlikely to be triggered, much more efficient.	2027	time-out is unlikely to be triggered, much more efficient.
1866
1867	Changing the timeout is trivial as well (if it isn't hard-coded in the
1868	callback :) - just change the timeout and invoke the callback, which will
1869	fix things for you.
1870		2028
1871	=item 4. Wee, just use a double-linked list for your timeouts.	2029	=item 4. Wee, just use a double-linked list for your timeouts.
1872		2030
1873	If there is not one request, but many thousands (millions...), all	2031	If there is not one request, but many thousands (millions...), all
1874	employing some kind of timeout with the same timeout value, then one can	2032	employing some kind of timeout with the same timeout value, then one can
…		…
1901	Method #1 is almost always a bad idea, and buys you nothing. Method #4 is	2059	Method #1 is almost always a bad idea, and buys you nothing. Method #4 is
1902	rather complicated, but extremely efficient, something that really pays	2060	rather complicated, but extremely efficient, something that really pays
1903	off after the first million or so of active timers, i.e. it's usually	2061	off after the first million or so of active timers, i.e. it's usually
1904	overkill :)	2062	overkill :)
1905		2063
		2064	=head3 The special problem of being too early
		2065
		2066	If you ask a timer to call your callback after three seconds, then
		2067	you expect it to be invoked after three seconds - but of course, this
		2068	cannot be guaranteed to infinite precision. Less obviously, it cannot be
		2069	guaranteed to any precision by libev - imagine somebody suspending the
		2070	process with a STOP signal for a few hours for example.
		2071
		2072	So, libev tries to invoke your callback as soon as possible I<after> the
		2073	delay has occurred, but cannot guarantee this.
		2074
		2075	A less obvious failure mode is calling your callback too early: many event
		2076	loops compare timestamps with a "elapsed delay >= requested delay", but
		2077	this can cause your callback to be invoked much earlier than you would
		2078	expect.
		2079
		2080	To see why, imagine a system with a clock that only offers full second
		2081	resolution (think windows if you can't come up with a broken enough OS
		2082	yourself). If you schedule a one-second timer at the time 500.9, then the
		2083	event loop will schedule your timeout to elapse at a system time of 500
		2084	(500.9 truncated to the resolution) + 1, or 501.
		2085
		2086	If an event library looks at the timeout 0.1s later, it will see "501 >=
		2087	501" and invoke the callback 0.1s after it was started, even though a
		2088	one-second delay was requested - this is being "too early", despite best
		2089	intentions.
		2090
		2091	This is the reason why libev will never invoke the callback if the elapsed
		2092	delay equals the requested delay, but only when the elapsed delay is
		2093	larger than the requested delay. In the example above, libev would only invoke
		2094	the callback at system time 502, or 1.1s after the timer was started.
		2095
		2096	So, while libev cannot guarantee that your callback will be invoked
		2097	exactly when requested, it I<can> and I<does> guarantee that the requested
		2098	delay has actually elapsed, or in other words, it always errs on the "too
		2099	late" side of things.
		2100
1906	=head3 The special problem of time updates	2101	=head3 The special problem of time updates
1907		2102
1908	Establishing the current time is a costly operation (it usually takes at	2103	Establishing the current time is a costly operation (it usually takes
1909	least two system calls): EV therefore updates its idea of the current	2104	at least one system call): EV therefore updates its idea of the current
1910	time only before and after C<ev_run> collects new events, which causes a	2105	time only before and after C<ev_run> collects new events, which causes a
1911	growing difference between C<ev_now ()> and C<ev_time ()> when handling	2106	growing difference between C<ev_now ()> and C<ev_time ()> when handling
1912	lots of events in one iteration.	2107	lots of events in one iteration.
1913		2108
1914	The relative timeouts are calculated relative to the C<ev_now ()>	2109	The relative timeouts are calculated relative to the C<ev_now ()>
1915	time. This is usually the right thing as this timestamp refers to the time	2110	time. This is usually the right thing as this timestamp refers to the time
1916	of the event triggering whatever timeout you are modifying/starting. If	2111	of the event triggering whatever timeout you are modifying/starting. If
1917	you suspect event processing to be delayed and you I<need> to base the	2112	you suspect event processing to be delayed and you I<need> to base the
1918	timeout on the current time, use something like this to adjust for this:	2113	timeout on the current time, use something like the following to adjust
		2114	for it:
1919		2115
1920	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);	2116	ev_timer_set (&timer, after + (ev_time () - ev_now ()), 0.);
1921		2117
1922	If the event loop is suspended for a long time, you can also force an	2118	If the event loop is suspended for a long time, you can also force an
1923	update of the time returned by C<ev_now ()> by calling C<ev_now_update	2119	update of the time returned by C<ev_now ()> by calling C<ev_now_update
1924	()>.	2120	()>, although that will push the event time of all outstanding events
		2121	further into the future.
		2122
		2123	=head3 The special problem of unsynchronised clocks
		2124
		2125	Modern systems have a variety of clocks - libev itself uses the normal
		2126	"wall clock" clock and, if available, the monotonic clock (to avoid time
		2127	jumps).
		2128
		2129	Neither of these clocks is synchronised with each other or any other clock
		2130	on the system, so C<ev_time ()> might return a considerably different time
		2131	than C<gettimeofday ()> or C<time ()>. On a GNU/Linux system, for example,
		2132	a call to C<gettimeofday> might return a second count that is one higher
		2133	than a directly following call to C<time>.
		2134
		2135	The moral of this is to only compare libev-related timestamps with
		2136	C<ev_time ()> and C<ev_now ()>, at least if you want better precision than
		2137	a second or so.
		2138
		2139	One more problem arises due to this lack of synchronisation: if libev uses
		2140	the system monotonic clock and you compare timestamps from C<ev_time>
		2141	or C<ev_now> from when you started your timer and when your callback is
		2142	invoked, you will find that sometimes the callback is a bit "early".
		2143
		2144	This is because C<ev_timer>s work in real time, not wall clock time, so
		2145	libev makes sure your callback is not invoked before the delay happened,
		2146	I<measured according to the real time>, not the system clock.
		2147
		2148	If your timeouts are based on a physical timescale (e.g. "time out this
		2149	connection after 100 seconds") then this shouldn't bother you as it is
		2150	exactly the right behaviour.
		2151
		2152	If you want to compare wall clock/system timestamps to your timers, then
		2153	you need to use C<ev_periodic>s, as these are based on the wall clock
		2154	time, where your comparisons will always generate correct results.
1925		2155
1926	=head3 The special problems of suspended animation	2156	=head3 The special problems of suspended animation
1927		2157
1928	When you leave the server world it is quite customary to hit machines that	2158	When you leave the server world it is quite customary to hit machines that
1929	can suspend/hibernate - what happens to the clocks during such a suspend?	2159	can suspend/hibernate - what happens to the clocks during such a suspend?
…		…
1959		2189
1960	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	2190	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
1961		2191
1962	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)	2192	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)
1963		2193
1964	Configure the timer to trigger after C<after> seconds. If C<repeat>	2194	Configure the timer to trigger after C<after> seconds (fractional and
1965	is C<0.>, then it will automatically be stopped once the timeout is	2195	negative values are supported). If C<repeat> is C<0.>, then it will
1966	reached. If it is positive, then the timer will automatically be	2196	automatically be stopped once the timeout is reached. If it is positive,
1967	configured to trigger again C<repeat> seconds later, again, and again,	2197	then the timer will automatically be configured to trigger again C<repeat>
1968	until stopped manually.	2198	seconds later, again, and again, until stopped manually.
1969		2199
1970	The timer itself will do a best-effort at avoiding drift, that is, if	2200	The timer itself will do a best-effort at avoiding drift, that is, if
1971	you configure a timer to trigger every 10 seconds, then it will normally	2201	you configure a timer to trigger every 10 seconds, then it will normally
1972	trigger at exactly 10 second intervals. If, however, your program cannot	2202	trigger at exactly 10 second intervals. If, however, your program cannot
1973	keep up with the timer (because it takes longer than those 10 seconds to	2203	keep up with the timer (because it takes longer than those 10 seconds to
1974	do stuff) the timer will not fire more than once per event loop iteration.	2204	do stuff) the timer will not fire more than once per event loop iteration.
1975		2205
1976	=item ev_timer_again (loop, ev_timer *)	2206	=item ev_timer_again (loop, ev_timer *)
1977		2207
1978	This will act as if the timer timed out and restart it again if it is	2208	This will act as if the timer timed out, and restarts it again if it is
1979	repeating. The exact semantics are:	2209	repeating. It basically works like calling C<ev_timer_stop>, updating the
		2210	timeout to the C<repeat> value and calling C<ev_timer_start>.
1980		2211
		2212	The exact semantics are as in the following rules, all of which will be
		2213	applied to the watcher:
		2214
		2215	=over 4
		2216
1981	If the timer is pending, its pending status is cleared.	2217	=item If the timer is pending, the pending status is always cleared.
1982		2218
1983	If the timer is started but non-repeating, stop it (as if it timed out).	2219	=item If the timer is started but non-repeating, stop it (as if it timed
		2220	out, without invoking it).
1984		2221
1985	If the timer is repeating, either start it if necessary (with the	2222	=item If the timer is repeating, make the C<repeat> value the new timeout
1986	C<repeat> value), or reset the running timer to the C<repeat> value.	2223	and start the timer, if necessary.
1987		2224
		2225	=back
		2226
1988	This sounds a bit complicated, see L<Be smart about timeouts>, above, for a	2227	This sounds a bit complicated, see L</Be smart about timeouts>, above, for a
1989	usage example.	2228	usage example.
1990		2229
1991	=item ev_tstamp ev_timer_remaining (loop, ev_timer *)	2230	=item ev_tstamp ev_timer_remaining (loop, ev_timer *)
1992		2231
1993	Returns the remaining time until a timer fires. If the timer is active,	2232	Returns the remaining time until a timer fires. If the timer is active,
…		…
2046	Periodic watchers are also timers of a kind, but they are very versatile	2285	Periodic watchers are also timers of a kind, but they are very versatile
2047	(and unfortunately a bit complex).	2286	(and unfortunately a bit complex).
2048		2287
2049	Unlike C<ev_timer>, periodic watchers are not based on real time (or	2288	Unlike C<ev_timer>, periodic watchers are not based on real time (or
2050	relative time, the physical time that passes) but on wall clock time	2289	relative time, the physical time that passes) but on wall clock time
2051	(absolute time, the thing you can read on your calender or clock). The	2290	(absolute time, the thing you can read on your calendar or clock). The
2052	difference is that wall clock time can run faster or slower than real	2291	difference is that wall clock time can run faster or slower than real
2053	time, and time jumps are not uncommon (e.g. when you adjust your	2292	time, and time jumps are not uncommon (e.g. when you adjust your
2054	wrist-watch).	2293	wrist-watch).
2055		2294
2056	You can tell a periodic watcher to trigger after some specific point	2295	You can tell a periodic watcher to trigger after some specific point
…		…
2061	C<ev_timer>, which would still trigger roughly 10 seconds after starting	2300	C<ev_timer>, which would still trigger roughly 10 seconds after starting
2062	it, as it uses a relative timeout).	2301	it, as it uses a relative timeout).
2063		2302
2064	C<ev_periodic> watchers can also be used to implement vastly more complex	2303	C<ev_periodic> watchers can also be used to implement vastly more complex
2065	timers, such as triggering an event on each "midnight, local time", or	2304	timers, such as triggering an event on each "midnight, local time", or
2066	other complicated rules. This cannot be done with C<ev_timer> watchers, as	2305	other complicated rules. This cannot easily be done with C<ev_timer>
2067	those cannot react to time jumps.	2306	watchers, as those cannot react to time jumps.
2068		2307
2069	As with timers, the callback is guaranteed to be invoked only when the	2308	As with timers, the callback is guaranteed to be invoked only when the
2070	point in time where it is supposed to trigger has passed. If multiple	2309	point in time where it is supposed to trigger has passed. If multiple
2071	timers become ready during the same loop iteration then the ones with	2310	timers become ready during the same loop iteration then the ones with
2072	earlier time-out values are invoked before ones with later time-out values	2311	earlier time-out values are invoked before ones with later time-out values
…		…
2113		2352
2114	Another way to think about it (for the mathematically inclined) is that	2353	Another way to think about it (for the mathematically inclined) is that
2115	C<ev_periodic> will try to run the callback in this mode at the next possible	2354	C<ev_periodic> will try to run the callback in this mode at the next possible
2116	time where C<time = offset (mod interval)>, regardless of any time jumps.	2355	time where C<time = offset (mod interval)>, regardless of any time jumps.
2117		2356
2118	For numerical stability it is preferable that the C<offset> value is near	2357	The C<interval> I<MUST> be positive, and for numerical stability, the
2119	C<ev_now ()> (the current time), but there is no range requirement for	2358	interval value should be higher than C<1/8192> (which is around 100
2120	this value, and in fact is often specified as zero.	2359	microseconds) and C<offset> should be higher than C<0> and should have
		2360	at most a similar magnitude as the current time (say, within a factor of
		2361	ten). Typical values for offset are, in fact, C<0> or something between
		2362	C<0> and C<interval>, which is also the recommended range.
2121		2363
2122	Note also that there is an upper limit to how often a timer can fire (CPU	2364	Note also that there is an upper limit to how often a timer can fire (CPU
2123	speed for example), so if C<interval> is very small then timing stability	2365	speed for example), so if C<interval> is very small then timing stability
2124	will of course deteriorate. Libev itself tries to be exact to be about one	2366	will of course deteriorate. Libev itself tries to be exact to be about one
2125	millisecond (if the OS supports it and the machine is fast enough).	2367	millisecond (if the OS supports it and the machine is fast enough).
…		…
2155		2397
2156	NOTE: I<< This callback must always return a time that is higher than or	2398	NOTE: I<< This callback must always return a time that is higher than or
2157	equal to the passed C<now> value >>.	2399	equal to the passed C<now> value >>.
2158		2400
2159	This can be used to create very complex timers, such as a timer that	2401	This can be used to create very complex timers, such as a timer that
2160	triggers on "next midnight, local time". To do this, you would calculate the	2402	triggers on "next midnight, local time". To do this, you would calculate
2161	next midnight after C<now> and return the timestamp value for this. How	2403	the next midnight after C<now> and return the timestamp value for
2162	you do this is, again, up to you (but it is not trivial, which is the main	2404	this. Here is a (completely untested, no error checking) example on how to
2163	reason I omitted it as an example).	2405	do this:
		2406
		2407	#include <time.h>
		2408
		2409	static ev_tstamp
		2410	my_rescheduler (ev_periodic *w, ev_tstamp now)
		2411	{
		2412	time_t tnow = (time_t)now;
		2413	struct tm tm;
		2414	localtime_r (&tnow, &tm);
		2415
		2416	tm.tm_sec = tm.tm_min = tm.tm_hour = 0; // midnight current day
		2417	++tm.tm_mday; // midnight next day
		2418
		2419	return mktime (&tm);
		2420	}
		2421
		2422	Note: this code might run into trouble on days that have more then two
		2423	midnights (beginning and end).
2164		2424
2165	=back	2425	=back
2166		2426
2167	=item ev_periodic_again (loop, ev_periodic *)	2427	=item ev_periodic_again (loop, ev_periodic *)
2168		2428
…		…
2233		2493
2234	ev_periodic hourly_tick;	2494	ev_periodic hourly_tick;
2235	ev_periodic_init (&hourly_tick, clock_cb,	2495	ev_periodic_init (&hourly_tick, clock_cb,
2236	fmod (ev_now (loop), 3600.), 3600., 0);	2496	fmod (ev_now (loop), 3600.), 3600., 0);
2237	ev_periodic_start (loop, &hourly_tick);	2497	ev_periodic_start (loop, &hourly_tick);
2238		2498
2239		2499
2240	=head2 C<ev_signal> - signal me when a signal gets signalled!	2500	=head2 C<ev_signal> - signal me when a signal gets signalled!
2241		2501
2242	Signal watchers will trigger an event when the process receives a specific	2502	Signal watchers will trigger an event when the process receives a specific
2243	signal one or more times. Even though signals are very asynchronous, libev	2503	signal one or more times. Even though signals are very asynchronous, libev
2244	will try it's best to deliver signals synchronously, i.e. as part of the	2504	will try its best to deliver signals synchronously, i.e. as part of the
2245	normal event processing, like any other event.	2505	normal event processing, like any other event.
2246		2506
2247	If you want signals to be delivered truly asynchronously, just use	2507	If you want signals to be delivered truly asynchronously, just use
2248	C<sigaction> as you would do without libev and forget about sharing	2508	C<sigaction> as you would do without libev and forget about sharing
2249	the signal. You can even use C<ev_async> from a signal handler to	2509	the signal. You can even use C<ev_async> from a signal handler to
…		…
2253	only within the same loop, i.e. you can watch for C<SIGINT> in your	2513	only within the same loop, i.e. you can watch for C<SIGINT> in your
2254	default loop and for C<SIGIO> in another loop, but you cannot watch for	2514	default loop and for C<SIGIO> in another loop, but you cannot watch for
2255	C<SIGINT> in both the default loop and another loop at the same time. At	2515	C<SIGINT> in both the default loop and another loop at the same time. At
2256	the moment, C<SIGCHLD> is permanently tied to the default loop.	2516	the moment, C<SIGCHLD> is permanently tied to the default loop.
2257		2517
2258	When the first watcher gets started will libev actually register something	2518	Only after the first watcher for a signal is started will libev actually
2259	with the kernel (thus it coexists with your own signal handlers as long as	2519	register something with the kernel. It thus coexists with your own signal
2260	you don't register any with libev for the same signal).	2520	handlers as long as you don't register any with libev for the same signal.
2261		2521
2262	If possible and supported, libev will install its handlers with	2522	If possible and supported, libev will install its handlers with
2263	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should	2523	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should
2264	not be unduly interrupted. If you have a problem with system calls getting	2524	not be unduly interrupted. If you have a problem with system calls getting
2265	interrupted by signals you can block all signals in an C<ev_check> watcher	2525	interrupted by signals you can block all signals in an C<ev_check> watcher
…		…
2268	=head3 The special problem of inheritance over fork/execve/pthread_create	2528	=head3 The special problem of inheritance over fork/execve/pthread_create
2269		2529
2270	Both the signal mask (C<sigprocmask>) and the signal disposition	2530	Both the signal mask (C<sigprocmask>) and the signal disposition
2271	(C<sigaction>) are unspecified after starting a signal watcher (and after	2531	(C<sigaction>) are unspecified after starting a signal watcher (and after
2272	stopping it again), that is, libev might or might not block the signal,	2532	stopping it again), that is, libev might or might not block the signal,
2273	and might or might not set or restore the installed signal handler.	2533	and might or might not set or restore the installed signal handler (but
		2534	see C<EVFLAG_NOSIGMASK>).
2274		2535
2275	While this does not matter for the signal disposition (libev never	2536	While this does not matter for the signal disposition (libev never
2276	sets signals to C<SIG_IGN>, so handlers will be reset to C<SIG_DFL> on	2537	sets signals to C<SIG_IGN>, so handlers will be reset to C<SIG_DFL> on
2277	C<execve>), this matters for the signal mask: many programs do not expect	2538	C<execve>), this matters for the signal mask: many programs do not expect
2278	certain signals to be blocked.	2539	certain signals to be blocked.
…		…
2291	I<has> to modify the signal mask, at least temporarily.	2552	I<has> to modify the signal mask, at least temporarily.
2292		2553
2293	So I can't stress this enough: I<If you do not reset your signal mask when	2554	So I can't stress this enough: I<If you do not reset your signal mask when
2294	you expect it to be empty, you have a race condition in your code>. This	2555	you expect it to be empty, you have a race condition in your code>. This
2295	is not a libev-specific thing, this is true for most event libraries.	2556	is not a libev-specific thing, this is true for most event libraries.
		2557
		2558	=head3 The special problem of threads signal handling
		2559
		2560	POSIX threads has problematic signal handling semantics, specifically,
		2561	a lot of functionality (sigfd, sigwait etc.) only really works if all
		2562	threads in a process block signals, which is hard to achieve.
		2563
		2564	When you want to use sigwait (or mix libev signal handling with your own
		2565	for the same signals), you can tackle this problem by globally blocking
		2566	all signals before creating any threads (or creating them with a fully set
		2567	sigprocmask) and also specifying the C<EVFLAG_NOSIGMASK> when creating
		2568	loops. Then designate one thread as "signal receiver thread" which handles
		2569	these signals. You can pass on any signals that libev might be interested
		2570	in by calling C<ev_feed_signal>.
2296		2571
2297	=head3 Watcher-Specific Functions and Data Members	2572	=head3 Watcher-Specific Functions and Data Members
2298		2573
2299	=over 4	2574	=over 4
2300		2575
…		…
2435		2710
2436	=head2 C<ev_stat> - did the file attributes just change?	2711	=head2 C<ev_stat> - did the file attributes just change?
2437		2712
2438	This watches a file system path for attribute changes. That is, it calls	2713	This watches a file system path for attribute changes. That is, it calls
2439	C<stat> on that path in regular intervals (or when the OS says it changed)	2714	C<stat> on that path in regular intervals (or when the OS says it changed)
2440	and sees if it changed compared to the last time, invoking the callback if	2715	and sees if it changed compared to the last time, invoking the callback
2441	it did.	2716	if it did. Starting the watcher C<stat>'s the file, so only changes that
		2717	happen after the watcher has been started will be reported.
2442		2718
2443	The path does not need to exist: changing from "path exists" to "path does	2719	The path does not need to exist: changing from "path exists" to "path does
2444	not exist" is a status change like any other. The condition "path does not	2720	not exist" is a status change like any other. The condition "path does not
2445	exist" (or more correctly "path cannot be stat'ed") is signified by the	2721	exist" (or more correctly "path cannot be stat'ed") is signified by the
2446	C<st_nlink> field being zero (which is otherwise always forced to be at	2722	C<st_nlink> field being zero (which is otherwise always forced to be at
…		…
2676	Apart from keeping your process non-blocking (which is a useful	2952	Apart from keeping your process non-blocking (which is a useful
2677	effect on its own sometimes), idle watchers are a good place to do	2953	effect on its own sometimes), idle watchers are a good place to do
2678	"pseudo-background processing", or delay processing stuff to after the	2954	"pseudo-background processing", or delay processing stuff to after the
2679	event loop has handled all outstanding events.	2955	event loop has handled all outstanding events.
2680		2956
		2957	=head3 Abusing an C<ev_idle> watcher for its side-effect
		2958
		2959	As long as there is at least one active idle watcher, libev will never
		2960	sleep unnecessarily. Or in other words, it will loop as fast as possible.
		2961	For this to work, the idle watcher doesn't need to be invoked at all - the
		2962	lowest priority will do.
		2963
		2964	This mode of operation can be useful together with an C<ev_check> watcher,
		2965	to do something on each event loop iteration - for example to balance load
		2966	between different connections.
		2967
		2968	See L</Abusing an ev_check watcher for its side-effect> for a longer
		2969	example.
		2970
2681	=head3 Watcher-Specific Functions and Data Members	2971	=head3 Watcher-Specific Functions and Data Members
2682		2972
2683	=over 4	2973	=over 4
2684		2974
2685	=item ev_idle_init (ev_idle *, callback)	2975	=item ev_idle_init (ev_idle *, callback)
…		…
2696	callback, free it. Also, use no error checking, as usual.	2986	callback, free it. Also, use no error checking, as usual.
2697		2987
2698	static void	2988	static void
2699	idle_cb (struct ev_loop *loop, ev_idle *w, int revents)	2989	idle_cb (struct ev_loop *loop, ev_idle *w, int revents)
2700	{	2990	{
		2991	// stop the watcher
		2992	ev_idle_stop (loop, w);
		2993
		2994	// now we can free it
2701	free (w);	2995	free (w);
		2996
2702	// now do something you wanted to do when the program has	2997	// now do something you wanted to do when the program has
2703	// no longer anything immediate to do.	2998	// no longer anything immediate to do.
2704	}	2999	}
2705		3000
2706	ev_idle *idle_watcher = malloc (sizeof (ev_idle));	3001	ev_idle *idle_watcher = malloc (sizeof (ev_idle));
…		…
2708	ev_idle_start (loop, idle_watcher);	3003	ev_idle_start (loop, idle_watcher);
2709		3004
2710		3005
2711	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!	3006	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!
2712		3007
2713	Prepare and check watchers are usually (but not always) used in pairs:	3008	Prepare and check watchers are often (but not always) used in pairs:
2714	prepare watchers get invoked before the process blocks and check watchers	3009	prepare watchers get invoked before the process blocks and check watchers
2715	afterwards.	3010	afterwards.
2716		3011
2717	You I<must not> call C<ev_run> or similar functions that enter	3012	You I<must not> call C<ev_run> (or similar functions that enter the
2718	the current event loop from either C<ev_prepare> or C<ev_check>	3013	current event loop) or C<ev_loop_fork> from either C<ev_prepare> or
2719	watchers. Other loops than the current one are fine, however. The	3014	C<ev_check> watchers. Other loops than the current one are fine,
2720	rationale behind this is that you do not need to check for recursion in	3015	however. The rationale behind this is that you do not need to check
2721	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,	3016	for recursion in those watchers, i.e. the sequence will always be
2722	C<ev_check> so if you have one watcher of each kind they will always be	3017	C<ev_prepare>, blocking, C<ev_check> so if you have one watcher of each
2723	called in pairs bracketing the blocking call.	3018	kind they will always be called in pairs bracketing the blocking call.
2724		3019
2725	Their main purpose is to integrate other event mechanisms into libev and	3020	Their main purpose is to integrate other event mechanisms into libev and
2726	their use is somewhat advanced. They could be used, for example, to track	3021	their use is somewhat advanced. They could be used, for example, to track
2727	variable changes, implement your own watchers, integrate net-snmp or a	3022	variable changes, implement your own watchers, integrate net-snmp or a
2728	coroutine library and lots more. They are also occasionally useful if	3023	coroutine library and lots more. They are also occasionally useful if
…		…
2746	with priority higher than or equal to the event loop and one coroutine	3041	with priority higher than or equal to the event loop and one coroutine
2747	of lower priority, but only once, using idle watchers to keep the event	3042	of lower priority, but only once, using idle watchers to keep the event
2748	loop from blocking if lower-priority coroutines are active, thus mapping	3043	loop from blocking if lower-priority coroutines are active, thus mapping
2749	low-priority coroutines to idle/background tasks).	3044	low-priority coroutines to idle/background tasks).
2750		3045
2751	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)	3046	When used for this purpose, it is recommended to give C<ev_check> watchers
2752	priority, to ensure that they are being run before any other watchers	3047	highest (C<EV_MAXPRI>) priority, to ensure that they are being run before
2753	after the poll (this doesn't matter for C<ev_prepare> watchers).	3048	any other watchers after the poll (this doesn't matter for C<ev_prepare>
		3049	watchers).
2754		3050
2755	Also, C<ev_check> watchers (and C<ev_prepare> watchers, too) should not	3051	Also, C<ev_check> watchers (and C<ev_prepare> watchers, too) should not
2756	activate ("feed") events into libev. While libev fully supports this, they	3052	activate ("feed") events into libev. While libev fully supports this, they
2757	might get executed before other C<ev_check> watchers did their job. As	3053	might get executed before other C<ev_check> watchers did their job. As
2758	C<ev_check> watchers are often used to embed other (non-libev) event	3054	C<ev_check> watchers are often used to embed other (non-libev) event
2759	loops those other event loops might be in an unusable state until their	3055	loops those other event loops might be in an unusable state until their
2760	C<ev_check> watcher ran (always remind yourself to coexist peacefully with	3056	C<ev_check> watcher ran (always remind yourself to coexist peacefully with
2761	others).	3057	others).
		3058
		3059	=head3 Abusing an C<ev_check> watcher for its side-effect
		3060
		3061	C<ev_check> (and less often also C<ev_prepare>) watchers can also be
		3062	useful because they are called once per event loop iteration. For
		3063	example, if you want to handle a large number of connections fairly, you
		3064	normally only do a bit of work for each active connection, and if there
		3065	is more work to do, you wait for the next event loop iteration, so other
		3066	connections have a chance of making progress.
		3067
		3068	Using an C<ev_check> watcher is almost enough: it will be called on the
		3069	next event loop iteration. However, that isn't as soon as possible -
		3070	without external events, your C<ev_check> watcher will not be invoked.
		3071
		3072	This is where C<ev_idle> watchers come in handy - all you need is a
		3073	single global idle watcher that is active as long as you have one active
		3074	C<ev_check> watcher. The C<ev_idle> watcher makes sure the event loop
		3075	will not sleep, and the C<ev_check> watcher makes sure a callback gets
		3076	invoked. Neither watcher alone can do that.
2762		3077
2763	=head3 Watcher-Specific Functions and Data Members	3078	=head3 Watcher-Specific Functions and Data Members
2764		3079
2765	=over 4	3080	=over 4
2766		3081
…		…
2967		3282
2968	=over 4	3283	=over 4
2969		3284
2970	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)	3285	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
2971		3286
2972	=item ev_embed_set (ev_embed *, callback, struct ev_loop *embedded_loop)	3287	=item ev_embed_set (ev_embed *, struct ev_loop *embedded_loop)
2973		3288
2974	Configures the watcher to embed the given loop, which must be	3289	Configures the watcher to embed the given loop, which must be
2975	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be	3290	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
2976	invoked automatically, otherwise it is the responsibility of the callback	3291	invoked automatically, otherwise it is the responsibility of the callback
2977	to invoke it (it will continue to be called until the sweep has been done,	3292	to invoke it (it will continue to be called until the sweep has been done,
…		…
2998	used).	3313	used).
2999		3314
3000	struct ev_loop *loop_hi = ev_default_init (0);	3315	struct ev_loop *loop_hi = ev_default_init (0);
3001	struct ev_loop *loop_lo = 0;	3316	struct ev_loop *loop_lo = 0;
3002	ev_embed embed;	3317	ev_embed embed;
3003		3318
3004	// see if there is a chance of getting one that works	3319	// see if there is a chance of getting one that works
3005	// (remember that a flags value of 0 means autodetection)	3320	// (remember that a flags value of 0 means autodetection)
3006	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()	3321	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()
3007	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())	3322	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())
3008	: 0;	3323	: 0;
…		…
3022	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).	3337	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
3023		3338
3024	struct ev_loop *loop = ev_default_init (0);	3339	struct ev_loop *loop = ev_default_init (0);
3025	struct ev_loop *loop_socket = 0;	3340	struct ev_loop *loop_socket = 0;
3026	ev_embed embed;	3341	ev_embed embed;
3027		3342
3028	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)	3343	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
3029	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))	3344	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
3030	{	3345	{
3031	ev_embed_init (&embed, 0, loop_socket);	3346	ev_embed_init (&embed, 0, loop_socket);
3032	ev_embed_start (loop, &embed);	3347	ev_embed_start (loop, &embed);
…		…
3040		3355
3041	=head2 C<ev_fork> - the audacity to resume the event loop after a fork	3356	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
3042		3357
3043	Fork watchers are called when a C<fork ()> was detected (usually because	3358	Fork watchers are called when a C<fork ()> was detected (usually because
3044	whoever is a good citizen cared to tell libev about it by calling	3359	whoever is a good citizen cared to tell libev about it by calling
3045	C<ev_default_fork> or C<ev_loop_fork>). The invocation is done before the	3360	C<ev_loop_fork>). The invocation is done before the event loop blocks next
3046	event loop blocks next and before C<ev_check> watchers are being called,	3361	and before C<ev_check> watchers are being called, and only in the child
3047	and only in the child after the fork. If whoever good citizen calling	3362	after the fork. If whoever good citizen calling C<ev_default_fork> cheats
3048	C<ev_default_fork> cheats and calls it in the wrong process, the fork	3363	and calls it in the wrong process, the fork handlers will be invoked, too,
3049	handlers will be invoked, too, of course.	3364	of course.
3050		3365
3051	=head3 The special problem of life after fork - how is it possible?	3366	=head3 The special problem of life after fork - how is it possible?
3052		3367
3053	Most uses of C<fork()> consist of forking, then some simple calls to set	3368	Most uses of C<fork ()> consist of forking, then some simple calls to set
3054	up/change the process environment, followed by a call to C<exec()>. This	3369	up/change the process environment, followed by a call to C<exec()>. This
3055	sequence should be handled by libev without any problems.	3370	sequence should be handled by libev without any problems.
3056		3371
3057	This changes when the application actually wants to do event handling	3372	This changes when the application actually wants to do event handling
3058	in the child, or both parent in child, in effect "continuing" after the	3373	in the child, or both parent in child, in effect "continuing" after the
…		…
3074	disadvantage of having to use multiple event loops (which do not support	3389	disadvantage of having to use multiple event loops (which do not support
3075	signal watchers).	3390	signal watchers).
3076		3391
3077	When this is not possible, or you want to use the default loop for	3392	When this is not possible, or you want to use the default loop for
3078	other reasons, then in the process that wants to start "fresh", call	3393	other reasons, then in the process that wants to start "fresh", call
3079	C<ev_default_destroy ()> followed by C<ev_default_loop (...)>. Destroying	3394	C<ev_loop_destroy (EV_DEFAULT)> followed by C<ev_default_loop (...)>.
3080	the default loop will "orphan" (not stop) all registered watchers, so you	3395	Destroying the default loop will "orphan" (not stop) all registered
3081	have to be careful not to execute code that modifies those watchers. Note	3396	watchers, so you have to be careful not to execute code that modifies
3082	also that in that case, you have to re-register any signal watchers.	3397	those watchers. Note also that in that case, you have to re-register any
		3398	signal watchers.
3083		3399
3084	=head3 Watcher-Specific Functions and Data Members	3400	=head3 Watcher-Specific Functions and Data Members
3085		3401
3086	=over 4	3402	=over 4
3087		3403
3088	=item ev_fork_init (ev_signal *, callback)	3404	=item ev_fork_init (ev_fork *, callback)
3089		3405
3090	Initialises and configures the fork watcher - it has no parameters of any	3406	Initialises and configures the fork watcher - it has no parameters of any
3091	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	3407	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
3092	believe me.	3408	really.
3093		3409
3094	=back	3410	=back
3095		3411
3096		3412
		3413	=head2 C<ev_cleanup> - even the best things end
		3414
		3415	Cleanup watchers are called just before the event loop is being destroyed
		3416	by a call to C<ev_loop_destroy>.
		3417
		3418	While there is no guarantee that the event loop gets destroyed, cleanup
		3419	watchers provide a convenient method to install cleanup hooks for your
		3420	program, worker threads and so on - you just to make sure to destroy the
		3421	loop when you want them to be invoked.
		3422
		3423	Cleanup watchers are invoked in the same way as any other watcher. Unlike
		3424	all other watchers, they do not keep a reference to the event loop (which
		3425	makes a lot of sense if you think about it). Like all other watchers, you
		3426	can call libev functions in the callback, except C<ev_cleanup_start>.
		3427
		3428	=head3 Watcher-Specific Functions and Data Members
		3429
		3430	=over 4
		3431
		3432	=item ev_cleanup_init (ev_cleanup *, callback)
		3433
		3434	Initialises and configures the cleanup watcher - it has no parameters of
		3435	any kind. There is a C<ev_cleanup_set> macro, but using it is utterly
		3436	pointless, I assure you.
		3437
		3438	=back
		3439
		3440	Example: Register an atexit handler to destroy the default loop, so any
		3441	cleanup functions are called.
		3442
		3443	static void
		3444	program_exits (void)
		3445	{
		3446	ev_loop_destroy (EV_DEFAULT_UC);
		3447	}
		3448
		3449	...
		3450	atexit (program_exits);
		3451
		3452
3097	=head2 C<ev_async> - how to wake up an event loop	3453	=head2 C<ev_async> - how to wake up an event loop
3098		3454
3099	In general, you cannot use an C<ev_run> from multiple threads or other	3455	In general, you cannot use an C<ev_loop> from multiple threads or other
3100	asynchronous sources such as signal handlers (as opposed to multiple event	3456	asynchronous sources such as signal handlers (as opposed to multiple event
3101	loops - those are of course safe to use in different threads).	3457	loops - those are of course safe to use in different threads).
3102		3458
3103	Sometimes, however, you need to wake up an event loop you do not control,	3459	Sometimes, however, you need to wake up an event loop you do not control,
3104	for example because it belongs to another thread. This is what C<ev_async>	3460	for example because it belongs to another thread. This is what C<ev_async>
…		…
3106	it by calling C<ev_async_send>, which is thread- and signal safe.	3462	it by calling C<ev_async_send>, which is thread- and signal safe.
3107		3463
3108	This functionality is very similar to C<ev_signal> watchers, as signals,	3464	This functionality is very similar to C<ev_signal> watchers, as signals,
3109	too, are asynchronous in nature, and signals, too, will be compressed	3465	too, are asynchronous in nature, and signals, too, will be compressed
3110	(i.e. the number of callback invocations may be less than the number of	3466	(i.e. the number of callback invocations may be less than the number of
3111	C<ev_async_sent> calls).	3467	C<ev_async_send> calls). In fact, you could use signal watchers as a kind
3112		3468	of "global async watchers" by using a watcher on an otherwise unused
3113	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not	3469	signal, and C<ev_feed_signal> to signal this watcher from another thread,
3114	just the default loop.	3470	even without knowing which loop owns the signal.
3115		3471
3116	=head3 Queueing	3472	=head3 Queueing
3117		3473
3118	C<ev_async> does not support queueing of data in any way. The reason	3474	C<ev_async> does not support queueing of data in any way. The reason
3119	is that the author does not know of a simple (or any) algorithm for a	3475	is that the author does not know of a simple (or any) algorithm for a
…		…
3211	trust me.	3567	trust me.
3212		3568
3213	=item ev_async_send (loop, ev_async *)	3569	=item ev_async_send (loop, ev_async *)
3214		3570
3215	Sends/signals/activates the given C<ev_async> watcher, that is, feeds	3571	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
3216	an C<EV_ASYNC> event on the watcher into the event loop. Unlike	3572	an C<EV_ASYNC> event on the watcher into the event loop, and instantly
		3573	returns.
		3574
3217	C<ev_feed_event>, this call is safe to do from other threads, signal or	3575	Unlike C<ev_feed_event>, this call is safe to do from other threads,
3218	similar contexts (see the discussion of C<EV_ATOMIC_T> in the embedding	3576	signal or similar contexts (see the discussion of C<EV_ATOMIC_T> in the
3219	section below on what exactly this means).	3577	embedding section below on what exactly this means).
3220		3578
3221	Note that, as with other watchers in libev, multiple events might get	3579	Note that, as with other watchers in libev, multiple events might get
3222	compressed into a single callback invocation (another way to look at this	3580	compressed into a single callback invocation (another way to look at
3223	is that C<ev_async> watchers are level-triggered, set on C<ev_async_send>,	3581	this is that C<ev_async> watchers are level-triggered: they are set on
3224	reset when the event loop detects that).	3582	C<ev_async_send>, reset when the event loop detects that).
3225		3583
3226	This call incurs the overhead of a system call only once per event loop	3584	This call incurs the overhead of at most one extra system call per event
3227	iteration, so while the overhead might be noticeable, it doesn't apply to	3585	loop iteration, if the event loop is blocked, and no syscall at all if
3228	repeated calls to C<ev_async_send> for the same event loop.	3586	the event loop (or your program) is processing events. That means that
		3587	repeated calls are basically free (there is no need to avoid calls for
		3588	performance reasons) and that the overhead becomes smaller (typically
		3589	zero) under load.
3229		3590
3230	=item bool = ev_async_pending (ev_async *)	3591	=item bool = ev_async_pending (ev_async *)
3231		3592
3232	Returns a non-zero value when C<ev_async_send> has been called on the	3593	Returns a non-zero value when C<ev_async_send> has been called on the
3233	watcher but the event has not yet been processed (or even noted) by the	3594	watcher but the event has not yet been processed (or even noted) by the
…		…
3250		3611
3251	There are some other functions of possible interest. Described. Here. Now.	3612	There are some other functions of possible interest. Described. Here. Now.
3252		3613
3253	=over 4	3614	=over 4
3254		3615
3255	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback)	3616	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback, arg)
3256		3617
3257	This function combines a simple timer and an I/O watcher, calls your	3618	This function combines a simple timer and an I/O watcher, calls your
3258	callback on whichever event happens first and automatically stops both	3619	callback on whichever event happens first and automatically stops both
3259	watchers. This is useful if you want to wait for a single event on an fd	3620	watchers. This is useful if you want to wait for a single event on an fd
3260	or timeout without having to allocate/configure/start/stop/free one or	3621	or timeout without having to allocate/configure/start/stop/free one or
…		…
3288	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	3649	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
3289		3650
3290	=item ev_feed_fd_event (loop, int fd, int revents)	3651	=item ev_feed_fd_event (loop, int fd, int revents)
3291		3652
3292	Feed an event on the given fd, as if a file descriptor backend detected	3653	Feed an event on the given fd, as if a file descriptor backend detected
3293	the given events it.	3654	the given events.
3294		3655
3295	=item ev_feed_signal_event (loop, int signum)	3656	=item ev_feed_signal_event (loop, int signum)
3296		3657
3297	Feed an event as if the given signal occurred (C<loop> must be the default	3658	Feed an event as if the given signal occurred. See also C<ev_feed_signal>,
3298	loop!).	3659	which is async-safe.
3299		3660
3300	=back	3661	=back
		3662
		3663
		3664	=head1 COMMON OR USEFUL IDIOMS (OR BOTH)
		3665
		3666	This section explains some common idioms that are not immediately
		3667	obvious. Note that examples are sprinkled over the whole manual, and this
		3668	section only contains stuff that wouldn't fit anywhere else.
		3669
		3670	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
		3671
		3672	Each watcher has, by default, a C<void *data> member that you can read
		3673	or modify at any time: libev will completely ignore it. This can be used
		3674	to associate arbitrary data with your watcher. If you need more data and
		3675	don't want to allocate memory separately and store a pointer to it in that
		3676	data member, you can also "subclass" the watcher type and provide your own
		3677	data:
		3678
		3679	struct my_io
		3680	{
		3681	ev_io io;
		3682	int otherfd;
		3683	void *somedata;
		3684	struct whatever *mostinteresting;
		3685	};
		3686
		3687	...
		3688	struct my_io w;
		3689	ev_io_init (&w.io, my_cb, fd, EV_READ);
		3690
		3691	And since your callback will be called with a pointer to the watcher, you
		3692	can cast it back to your own type:
		3693
		3694	static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)
		3695	{
		3696	struct my_io *w = (struct my_io *)w_;
		3697	...
		3698	}
		3699
		3700	More interesting and less C-conformant ways of casting your callback
		3701	function type instead have been omitted.
		3702
		3703	=head2 BUILDING YOUR OWN COMPOSITE WATCHERS
		3704
		3705	Another common scenario is to use some data structure with multiple
		3706	embedded watchers, in effect creating your own watcher that combines
		3707	multiple libev event sources into one "super-watcher":
		3708
		3709	struct my_biggy
		3710	{
		3711	int some_data;
		3712	ev_timer t1;
		3713	ev_timer t2;
		3714	}
		3715
		3716	In this case getting the pointer to C<my_biggy> is a bit more
		3717	complicated: Either you store the address of your C<my_biggy> struct in
		3718	the C<data> member of the watcher (for woozies or C++ coders), or you need
		3719	to use some pointer arithmetic using C<offsetof> inside your watchers (for
		3720	real programmers):
		3721
		3722	#include <stddef.h>
		3723
		3724	static void
		3725	t1_cb (EV_P_ ev_timer *w, int revents)
		3726	{
		3727	struct my_biggy big = (struct my_biggy *)
		3728	(((char *)w) - offsetof (struct my_biggy, t1));
		3729	}
		3730
		3731	static void
		3732	t2_cb (EV_P_ ev_timer *w, int revents)
		3733	{
		3734	struct my_biggy big = (struct my_biggy *)
		3735	(((char *)w) - offsetof (struct my_biggy, t2));
		3736	}
		3737
		3738	=head2 AVOIDING FINISHING BEFORE RETURNING
		3739
		3740	Often you have structures like this in event-based programs:
		3741
		3742	callback ()
		3743	{
		3744	free (request);
		3745	}
		3746
		3747	request = start_new_request (..., callback);
		3748
		3749	The intent is to start some "lengthy" operation. The C<request> could be
		3750	used to cancel the operation, or do other things with it.
		3751
		3752	It's not uncommon to have code paths in C<start_new_request> that
		3753	immediately invoke the callback, for example, to report errors. Or you add
		3754	some caching layer that finds that it can skip the lengthy aspects of the
		3755	operation and simply invoke the callback with the result.
		3756
		3757	The problem here is that this will happen I<before> C<start_new_request>
		3758	has returned, so C<request> is not set.
		3759
		3760	Even if you pass the request by some safer means to the callback, you
		3761	might want to do something to the request after starting it, such as
		3762	canceling it, which probably isn't working so well when the callback has
		3763	already been invoked.
		3764
		3765	A common way around all these issues is to make sure that
		3766	C<start_new_request> I<always> returns before the callback is invoked. If
		3767	C<start_new_request> immediately knows the result, it can artificially
		3768	delay invoking the callback by using a C<prepare> or C<idle> watcher for
		3769	example, or more sneakily, by reusing an existing (stopped) watcher and
		3770	pushing it into the pending queue:
		3771
		3772	ev_set_cb (watcher, callback);
		3773	ev_feed_event (EV_A_ watcher, 0);
		3774
		3775	This way, C<start_new_request> can safely return before the callback is
		3776	invoked, while not delaying callback invocation too much.
		3777
		3778	=head2 MODEL/NESTED EVENT LOOP INVOCATIONS AND EXIT CONDITIONS
		3779
		3780	Often (especially in GUI toolkits) there are places where you have
		3781	I<modal> interaction, which is most easily implemented by recursively
		3782	invoking C<ev_run>.
		3783
		3784	This brings the problem of exiting - a callback might want to finish the
		3785	main C<ev_run> call, but not the nested one (e.g. user clicked "Quit", but
		3786	a modal "Are you sure?" dialog is still waiting), or just the nested one
		3787	and not the main one (e.g. user clocked "Ok" in a modal dialog), or some
		3788	other combination: In these cases, a simple C<ev_break> will not work.
		3789
		3790	The solution is to maintain "break this loop" variable for each C<ev_run>
		3791	invocation, and use a loop around C<ev_run> until the condition is
		3792	triggered, using C<EVRUN_ONCE>:
		3793
		3794	// main loop
		3795	int exit_main_loop = 0;
		3796
		3797	while (!exit_main_loop)
		3798	ev_run (EV_DEFAULT_ EVRUN_ONCE);
		3799
		3800	// in a modal watcher
		3801	int exit_nested_loop = 0;
		3802
		3803	while (!exit_nested_loop)
		3804	ev_run (EV_A_ EVRUN_ONCE);
		3805
		3806	To exit from any of these loops, just set the corresponding exit variable:
		3807
		3808	// exit modal loop
		3809	exit_nested_loop = 1;
		3810
		3811	// exit main program, after modal loop is finished
		3812	exit_main_loop = 1;
		3813
		3814	// exit both
		3815	exit_main_loop = exit_nested_loop = 1;
		3816
		3817	=head2 THREAD LOCKING EXAMPLE
		3818
		3819	Here is a fictitious example of how to run an event loop in a different
		3820	thread from where callbacks are being invoked and watchers are
		3821	created/added/removed.
		3822
		3823	For a real-world example, see the C<EV::Loop::Async> perl module,
		3824	which uses exactly this technique (which is suited for many high-level
		3825	languages).
		3826
		3827	The example uses a pthread mutex to protect the loop data, a condition
		3828	variable to wait for callback invocations, an async watcher to notify the
		3829	event loop thread and an unspecified mechanism to wake up the main thread.
		3830
		3831	First, you need to associate some data with the event loop:
		3832
		3833	typedef struct {
		3834	mutex_t lock; /* global loop lock */
		3835	ev_async async_w;
		3836	thread_t tid;
		3837	cond_t invoke_cv;
		3838	} userdata;
		3839
		3840	void prepare_loop (EV_P)
		3841	{
		3842	// for simplicity, we use a static userdata struct.
		3843	static userdata u;
		3844
		3845	ev_async_init (&u->async_w, async_cb);
		3846	ev_async_start (EV_A_ &u->async_w);
		3847
		3848	pthread_mutex_init (&u->lock, 0);
		3849	pthread_cond_init (&u->invoke_cv, 0);
		3850
		3851	// now associate this with the loop
		3852	ev_set_userdata (EV_A_ u);
		3853	ev_set_invoke_pending_cb (EV_A_ l_invoke);
		3854	ev_set_loop_release_cb (EV_A_ l_release, l_acquire);
		3855
		3856	// then create the thread running ev_run
		3857	pthread_create (&u->tid, 0, l_run, EV_A);
		3858	}
		3859
		3860	The callback for the C<ev_async> watcher does nothing: the watcher is used
		3861	solely to wake up the event loop so it takes notice of any new watchers
		3862	that might have been added:
		3863
		3864	static void
		3865	async_cb (EV_P_ ev_async *w, int revents)
		3866	{
		3867	// just used for the side effects
		3868	}
		3869
		3870	The C<l_release> and C<l_acquire> callbacks simply unlock/lock the mutex
		3871	protecting the loop data, respectively.
		3872
		3873	static void
		3874	l_release (EV_P)
		3875	{
		3876	userdata *u = ev_userdata (EV_A);
		3877	pthread_mutex_unlock (&u->lock);
		3878	}
		3879
		3880	static void
		3881	l_acquire (EV_P)
		3882	{
		3883	userdata *u = ev_userdata (EV_A);
		3884	pthread_mutex_lock (&u->lock);
		3885	}
		3886
		3887	The event loop thread first acquires the mutex, and then jumps straight
		3888	into C<ev_run>:
		3889
		3890	void *
		3891	l_run (void *thr_arg)
		3892	{
		3893	struct ev_loop *loop = (struct ev_loop *)thr_arg;
		3894
		3895	l_acquire (EV_A);
		3896	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
		3897	ev_run (EV_A_ 0);
		3898	l_release (EV_A);
		3899
		3900	return 0;
		3901	}
		3902
		3903	Instead of invoking all pending watchers, the C<l_invoke> callback will
		3904	signal the main thread via some unspecified mechanism (signals? pipe
		3905	writes? C<Async::Interrupt>?) and then waits until all pending watchers
		3906	have been called (in a while loop because a) spurious wakeups are possible
		3907	and b) skipping inter-thread-communication when there are no pending
		3908	watchers is very beneficial):
		3909
		3910	static void
		3911	l_invoke (EV_P)
		3912	{
		3913	userdata *u = ev_userdata (EV_A);
		3914
		3915	while (ev_pending_count (EV_A))
		3916	{
		3917	wake_up_other_thread_in_some_magic_or_not_so_magic_way ();
		3918	pthread_cond_wait (&u->invoke_cv, &u->lock);
		3919	}
		3920	}
		3921
		3922	Now, whenever the main thread gets told to invoke pending watchers, it
		3923	will grab the lock, call C<ev_invoke_pending> and then signal the loop
		3924	thread to continue:
		3925
		3926	static void
		3927	real_invoke_pending (EV_P)
		3928	{
		3929	userdata *u = ev_userdata (EV_A);
		3930
		3931	pthread_mutex_lock (&u->lock);
		3932	ev_invoke_pending (EV_A);
		3933	pthread_cond_signal (&u->invoke_cv);
		3934	pthread_mutex_unlock (&u->lock);
		3935	}
		3936
		3937	Whenever you want to start/stop a watcher or do other modifications to an
		3938	event loop, you will now have to lock:
		3939
		3940	ev_timer timeout_watcher;
		3941	userdata *u = ev_userdata (EV_A);
		3942
		3943	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
		3944
		3945	pthread_mutex_lock (&u->lock);
		3946	ev_timer_start (EV_A_ &timeout_watcher);
		3947	ev_async_send (EV_A_ &u->async_w);
		3948	pthread_mutex_unlock (&u->lock);
		3949
		3950	Note that sending the C<ev_async> watcher is required because otherwise
		3951	an event loop currently blocking in the kernel will have no knowledge
		3952	about the newly added timer. By waking up the loop it will pick up any new
		3953	watchers in the next event loop iteration.
		3954
		3955	=head2 THREADS, COROUTINES, CONTINUATIONS, QUEUES... INSTEAD OF CALLBACKS
		3956
		3957	While the overhead of a callback that e.g. schedules a thread is small, it
		3958	is still an overhead. If you embed libev, and your main usage is with some
		3959	kind of threads or coroutines, you might want to customise libev so that
		3960	doesn't need callbacks anymore.
		3961
		3962	Imagine you have coroutines that you can switch to using a function
		3963	C<switch_to (coro)>, that libev runs in a coroutine called C<libev_coro>
		3964	and that due to some magic, the currently active coroutine is stored in a
		3965	global called C<current_coro>. Then you can build your own "wait for libev
		3966	event" primitive by changing C<EV_CB_DECLARE> and C<EV_CB_INVOKE> (note
		3967	the differing C<;> conventions):
		3968
		3969	#define EV_CB_DECLARE(type) struct my_coro *cb;
		3970	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)
		3971
		3972	That means instead of having a C callback function, you store the
		3973	coroutine to switch to in each watcher, and instead of having libev call
		3974	your callback, you instead have it switch to that coroutine.
		3975
		3976	A coroutine might now wait for an event with a function called
		3977	C<wait_for_event>. (the watcher needs to be started, as always, but it doesn't
		3978	matter when, or whether the watcher is active or not when this function is
		3979	called):
		3980
		3981	void
		3982	wait_for_event (ev_watcher *w)
		3983	{
		3984	ev_set_cb (w, current_coro);
		3985	switch_to (libev_coro);
		3986	}
		3987
		3988	That basically suspends the coroutine inside C<wait_for_event> and
		3989	continues the libev coroutine, which, when appropriate, switches back to
		3990	this or any other coroutine.
		3991
		3992	You can do similar tricks if you have, say, threads with an event queue -
		3993	instead of storing a coroutine, you store the queue object and instead of
		3994	switching to a coroutine, you push the watcher onto the queue and notify
		3995	any waiters.
		3996
		3997	To embed libev, see L</EMBEDDING>, but in short, it's easiest to create two
		3998	files, F<my_ev.h> and F<my_ev.c> that include the respective libev files:
		3999
		4000	// my_ev.h
		4001	#define EV_CB_DECLARE(type) struct my_coro *cb;
		4002	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)
		4003	#include "../libev/ev.h"
		4004
		4005	// my_ev.c
		4006	#define EV_H "my_ev.h"
		4007	#include "../libev/ev.c"
		4008
		4009	And then use F<my_ev.h> when you would normally use F<ev.h>, and compile
		4010	F<my_ev.c> into your project. When properly specifying include paths, you
		4011	can even use F<ev.h> as header file name directly.
3301		4012
3302		4013
3303	=head1 LIBEVENT EMULATION	4014	=head1 LIBEVENT EMULATION
3304		4015
3305	Libev offers a compatibility emulation layer for libevent. It cannot	4016	Libev offers a compatibility emulation layer for libevent. It cannot
3306	emulate the internals of libevent, so here are some usage hints:	4017	emulate the internals of libevent, so here are some usage hints:
3307		4018
3308	=over 4	4019	=over 4
		4020
		4021	=item * Only the libevent-1.4.1-beta API is being emulated.
		4022
		4023	This was the newest libevent version available when libev was implemented,
		4024	and is still mostly unchanged in 2010.
3309		4025
3310	=item * Use it by including <event.h>, as usual.	4026	=item * Use it by including <event.h>, as usual.
3311		4027
3312	=item * The following members are fully supported: ev_base, ev_callback,	4028	=item * The following members are fully supported: ev_base, ev_callback,
3313	ev_arg, ev_fd, ev_res, ev_events.	4029	ev_arg, ev_fd, ev_res, ev_events.
…		…
3319	=item * Priorities are not currently supported. Initialising priorities	4035	=item * Priorities are not currently supported. Initialising priorities
3320	will fail and all watchers will have the same priority, even though there	4036	will fail and all watchers will have the same priority, even though there
3321	is an ev_pri field.	4037	is an ev_pri field.
3322		4038
3323	=item * In libevent, the last base created gets the signals, in libev, the	4039	=item * In libevent, the last base created gets the signals, in libev, the
3324	first base created (== the default loop) gets the signals.	4040	base that registered the signal gets the signals.
3325		4041
3326	=item * Other members are not supported.	4042	=item * Other members are not supported.
3327		4043
3328	=item * The libev emulation is I<not> ABI compatible to libevent, you need	4044	=item * The libev emulation is I<not> ABI compatible to libevent, you need
3329	to use the libev header file and library.	4045	to use the libev header file and library.
3330		4046
3331	=back	4047	=back
3332		4048
3333	=head1 C++ SUPPORT	4049	=head1 C++ SUPPORT
		4050
		4051	=head2 C API
		4052
		4053	The normal C API should work fine when used from C++: both ev.h and the
		4054	libev sources can be compiled as C++. Therefore, code that uses the C API
		4055	will work fine.
		4056
		4057	Proper exception specifications might have to be added to callbacks passed
		4058	to libev: exceptions may be thrown only from watcher callbacks, all other
		4059	callbacks (allocator, syserr, loop acquire/release and periodic reschedule
		4060	callbacks) must not throw exceptions, and might need a C<noexcept>
		4061	specification. If you have code that needs to be compiled as both C and
		4062	C++ you can use the C<EV_NOEXCEPT> macro for this:
		4063
		4064	static void
		4065	fatal_error (const char *msg) EV_NOEXCEPT
		4066	{
		4067	perror (msg);
		4068	abort ();
		4069	}
		4070
		4071	...
		4072	ev_set_syserr_cb (fatal_error);
		4073
		4074	The only API functions that can currently throw exceptions are C<ev_run>,
		4075	C<ev_invoke>, C<ev_invoke_pending> and C<ev_loop_destroy> (the latter
		4076	because it runs cleanup watchers).
		4077
		4078	Throwing exceptions in watcher callbacks is only supported if libev itself
		4079	is compiled with a C++ compiler or your C and C++ environments allow
		4080	throwing exceptions through C libraries (most do).
		4081
		4082	=head2 C++ API
3334		4083
3335	Libev comes with some simplistic wrapper classes for C++ that mainly allow	4084	Libev comes with some simplistic wrapper classes for C++ that mainly allow
3336	you to use some convenience methods to start/stop watchers and also change	4085	you to use some convenience methods to start/stop watchers and also change
3337	the callback model to a model using method callbacks on objects.	4086	the callback model to a model using method callbacks on objects.
3338		4087
3339	To use it,	4088	To use it,
3340		4089
3341	#include <ev++.h>	4090	#include <ev++.h>
3342		4091
3343	This automatically includes F<ev.h> and puts all of its definitions (many	4092	This automatically includes F<ev.h> and puts all of its definitions (many
3344	of them macros) into the global namespace. All C++ specific things are	4093	of them macros) into the global namespace. All C++ specific things are
3345	put into the C<ev> namespace. It should support all the same embedding	4094	put into the C<ev> namespace. It should support all the same embedding
…		…
3348	Care has been taken to keep the overhead low. The only data member the C++	4097	Care has been taken to keep the overhead low. The only data member the C++
3349	classes add (compared to plain C-style watchers) is the event loop pointer	4098	classes add (compared to plain C-style watchers) is the event loop pointer
3350	that the watcher is associated with (or no additional members at all if	4099	that the watcher is associated with (or no additional members at all if
3351	you disable C<EV_MULTIPLICITY> when embedding libev).	4100	you disable C<EV_MULTIPLICITY> when embedding libev).
3352		4101
3353	Currently, functions, and static and non-static member functions can be	4102	Currently, functions, static and non-static member functions and classes
3354	used as callbacks. Other types should be easy to add as long as they only	4103	with C<operator ()> can be used as callbacks. Other types should be easy
3355	need one additional pointer for context. If you need support for other	4104	to add as long as they only need one additional pointer for context. If
3356	types of functors please contact the author (preferably after implementing	4105	you need support for other types of functors please contact the author
3357	it).	4106	(preferably after implementing it).
		4107
		4108	For all this to work, your C++ compiler either has to use the same calling
		4109	conventions as your C compiler (for static member functions), or you have
		4110	to embed libev and compile libev itself as C++.
3358		4111
3359	Here is a list of things available in the C<ev> namespace:	4112	Here is a list of things available in the C<ev> namespace:
3360		4113
3361	=over 4	4114	=over 4
3362		4115
…		…
3372	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.	4125	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.
3373		4126
3374	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of	4127	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of
3375	the same name in the C<ev> namespace, with the exception of C<ev_signal>	4128	the same name in the C<ev> namespace, with the exception of C<ev_signal>
3376	which is called C<ev::sig> to avoid clashes with the C<signal> macro	4129	which is called C<ev::sig> to avoid clashes with the C<signal> macro
3377	defines by many implementations.	4130	defined by many implementations.
3378		4131
3379	All of those classes have these methods:	4132	All of those classes have these methods:
3380		4133
3381	=over 4	4134	=over 4
3382		4135
…		…
3444	void operator() (ev::io &w, int revents)	4197	void operator() (ev::io &w, int revents)
3445	{	4198	{
3446	...	4199	...
3447	}	4200	}
3448	}	4201	}
3449		4202
3450	myfunctor f;	4203	myfunctor f;
3451		4204
3452	ev::io w;	4205	ev::io w;
3453	w.set (&f);	4206	w.set (&f);
3454		4207
…		…
3472	Associates a different C<struct ev_loop> with this watcher. You can only	4225	Associates a different C<struct ev_loop> with this watcher. You can only
3473	do this when the watcher is inactive (and not pending either).	4226	do this when the watcher is inactive (and not pending either).
3474		4227
3475	=item w->set ([arguments])	4228	=item w->set ([arguments])
3476		4229
3477	Basically the same as C<ev_TYPE_set>, with the same arguments. Either this	4230	Basically the same as C<ev_TYPE_set> (except for C<ev::embed> watchers>),
3478	method or a suitable start method must be called at least once. Unlike the	4231	with the same arguments. Either this method or a suitable start method
3479	C counterpart, an active watcher gets automatically stopped and restarted	4232	must be called at least once. Unlike the C counterpart, an active watcher
3480	when reconfiguring it with this method.	4233	gets automatically stopped and restarted when reconfiguring it with this
		4234	method.
		4235
		4236	For C<ev::embed> watchers this method is called C<set_embed>, to avoid
		4237	clashing with the C<set (loop)> method.
3481		4238
3482	=item w->start ()	4239	=item w->start ()
3483		4240
3484	Starts the watcher. Note that there is no C<loop> argument, as the	4241	Starts the watcher. Note that there is no C<loop> argument, as the
3485	constructor already stores the event loop.	4242	constructor already stores the event loop.
…		…
3515	watchers in the constructor.	4272	watchers in the constructor.
3516		4273
3517	class myclass	4274	class myclass
3518	{	4275	{
3519	ev::io io ; void io_cb (ev::io &w, int revents);	4276	ev::io io ; void io_cb (ev::io &w, int revents);
3520	ev::io2 io2 ; void io2_cb (ev::io &w, int revents);	4277	ev::io io2 ; void io2_cb (ev::io &w, int revents);
3521	ev::idle idle; void idle_cb (ev::idle &w, int revents);	4278	ev::idle idle; void idle_cb (ev::idle &w, int revents);
3522		4279
3523	myclass (int fd)	4280	myclass (int fd)
3524	{	4281	{
3525	io .set <myclass, &myclass::io_cb > (this);	4282	io .set <myclass, &myclass::io_cb > (this);
…		…
3576	L<http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hlibev>.	4333	L<http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hlibev>.
3577		4334
3578	=item D	4335	=item D
3579		4336
3580	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to	4337	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
3581	be found at L<http://proj.llucax.com.ar/wiki/evd>.	4338	be found at L<http://www.llucax.com.ar/proj/ev.d/index.html>.
3582		4339
3583	=item Ocaml	4340	=item Ocaml
3584		4341
3585	Erkki Seppala has written Ocaml bindings for libev, to be found at	4342	Erkki Seppala has written Ocaml bindings for libev, to be found at
3586	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.	4343	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.
…		…
3589		4346
3590	Brian Maher has written a partial interface to libev for lua (at the	4347	Brian Maher has written a partial interface to libev for lua (at the
3591	time of this writing, only C<ev_io> and C<ev_timer>), to be found at	4348	time of this writing, only C<ev_io> and C<ev_timer>), to be found at
3592	L<http://github.com/brimworks/lua-ev>.	4349	L<http://github.com/brimworks/lua-ev>.
3593		4350
		4351	=item Javascript
		4352
		4353	Node.js (L<http://nodejs.org>) uses libev as the underlying event library.
		4354
		4355	=item Others
		4356
		4357	There are others, and I stopped counting.
		4358
3594	=back	4359	=back
3595		4360
3596		4361
3597	=head1 MACRO MAGIC	4362	=head1 MACRO MAGIC
3598		4363
…		…
3634	suitable for use with C<EV_A>.	4399	suitable for use with C<EV_A>.
3635		4400
3636	=item C<EV_DEFAULT>, C<EV_DEFAULT_>	4401	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
3637		4402
3638	Similar to the other two macros, this gives you the value of the default	4403	Similar to the other two macros, this gives you the value of the default
3639	loop, if multiple loops are supported ("ev loop default").	4404	loop, if multiple loops are supported ("ev loop default"). The default loop
		4405	will be initialised if it isn't already initialised.
		4406
		4407	For non-multiplicity builds, these macros do nothing, so you always have
		4408	to initialise the loop somewhere.
3640		4409
3641	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>	4410	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
3642		4411
3643	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the	4412	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
3644	default loop has been initialised (C<UC> == unchecked). Their behaviour	4413	default loop has been initialised (C<UC> == unchecked). Their behaviour
…		…
3711	ev_vars.h	4480	ev_vars.h
3712	ev_wrap.h	4481	ev_wrap.h
3713		4482
3714	ev_win32.c required on win32 platforms only	4483	ev_win32.c required on win32 platforms only
3715		4484
3716	ev_select.c only when select backend is enabled (which is enabled by default)	4485	ev_select.c only when select backend is enabled
3717	ev_poll.c only when poll backend is enabled (disabled by default)	4486	ev_poll.c only when poll backend is enabled
3718	ev_epoll.c only when the epoll backend is enabled (disabled by default)	4487	ev_epoll.c only when the epoll backend is enabled
		4488	ev_linuxaio.c only when the linux aio backend is enabled
3719	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)	4489	ev_kqueue.c only when the kqueue backend is enabled
3720	ev_port.c only when the solaris port backend is enabled (disabled by default)	4490	ev_port.c only when the solaris port backend is enabled
3721		4491
3722	F<ev.c> includes the backend files directly when enabled, so you only need	4492	F<ev.c> includes the backend files directly when enabled, so you only need
3723	to compile this single file.	4493	to compile this single file.
3724		4494
3725	=head3 LIBEVENT COMPATIBILITY API	4495	=head3 LIBEVENT COMPATIBILITY API
…		…
3789	supported). It will also not define any of the structs usually found in	4559	supported). It will also not define any of the structs usually found in
3790	F<event.h> that are not directly supported by the libev core alone.	4560	F<event.h> that are not directly supported by the libev core alone.
3791		4561
3792	In standalone mode, libev will still try to automatically deduce the	4562	In standalone mode, libev will still try to automatically deduce the
3793	configuration, but has to be more conservative.	4563	configuration, but has to be more conservative.
		4564
		4565	=item EV_USE_FLOOR
		4566
		4567	If defined to be C<1>, libev will use the C<floor ()> function for its
		4568	periodic reschedule calculations, otherwise libev will fall back on a
		4569	portable (slower) implementation. If you enable this, you usually have to
		4570	link against libm or something equivalent. Enabling this when the C<floor>
		4571	function is not available will fail, so the safe default is to not enable
		4572	this.
3794		4573
3795	=item EV_USE_MONOTONIC	4574	=item EV_USE_MONOTONIC
3796		4575
3797	If defined to be C<1>, libev will try to detect the availability of the	4576	If defined to be C<1>, libev will try to detect the availability of the
3798	monotonic clock option at both compile time and runtime. Otherwise no	4577	monotonic clock option at both compile time and runtime. Otherwise no
…		…
3884	If programs implement their own fd to handle mapping on win32, then this	4663	If programs implement their own fd to handle mapping on win32, then this
3885	macro can be used to override the C<close> function, useful to unregister	4664	macro can be used to override the C<close> function, useful to unregister
3886	file descriptors again. Note that the replacement function has to close	4665	file descriptors again. Note that the replacement function has to close
3887	the underlying OS handle.	4666	the underlying OS handle.
3888		4667
		4668	=item EV_USE_WSASOCKET
		4669
		4670	If defined to be C<1>, libev will use C<WSASocket> to create its internal
		4671	communication socket, which works better in some environments. Otherwise,
		4672	the normal C<socket> function will be used, which works better in other
		4673	environments.
		4674
3889	=item EV_USE_POLL	4675	=item EV_USE_POLL
3890		4676
3891	If defined to be C<1>, libev will compile in support for the C<poll>(2)	4677	If defined to be C<1>, libev will compile in support for the C<poll>(2)
3892	backend. Otherwise it will be enabled on non-win32 platforms. It	4678	backend. Otherwise it will be enabled on non-win32 platforms. It
3893	takes precedence over select.	4679	takes precedence over select.
…		…
3897	If defined to be C<1>, libev will compile in support for the Linux	4683	If defined to be C<1>, libev will compile in support for the Linux
3898	C<epoll>(7) backend. Its availability will be detected at runtime,	4684	C<epoll>(7) backend. Its availability will be detected at runtime,
3899	otherwise another method will be used as fallback. This is the preferred	4685	otherwise another method will be used as fallback. This is the preferred
3900	backend for GNU/Linux systems. If undefined, it will be enabled if the	4686	backend for GNU/Linux systems. If undefined, it will be enabled if the
3901	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.	4687	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
		4688
		4689	=item EV_USE_LINUXAIO
		4690
		4691	If defined to be C<1>, libev will compile in support for the Linux
		4692	aio backend. Due to it's currenbt limitations it has to be requested
		4693	explicitly. If undefined, it will be enabled on linux, otherwise
		4694	disabled.
3902		4695
3903	=item EV_USE_KQUEUE	4696	=item EV_USE_KQUEUE
3904		4697
3905	If defined to be C<1>, libev will compile in support for the BSD style	4698	If defined to be C<1>, libev will compile in support for the BSD style
3906	C<kqueue>(2) backend. Its actual availability will be detected at runtime,	4699	C<kqueue>(2) backend. Its actual availability will be detected at runtime,
…		…
3928	If defined to be C<1>, libev will compile in support for the Linux inotify	4721	If defined to be C<1>, libev will compile in support for the Linux inotify
3929	interface to speed up C<ev_stat> watchers. Its actual availability will	4722	interface to speed up C<ev_stat> watchers. Its actual availability will
3930	be detected at runtime. If undefined, it will be enabled if the headers	4723	be detected at runtime. If undefined, it will be enabled if the headers
3931	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.	4724	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
3932		4725
		4726	=item EV_NO_SMP
		4727
		4728	If defined to be C<1>, libev will assume that memory is always coherent
		4729	between threads, that is, threads can be used, but threads never run on
		4730	different cpus (or different cpu cores). This reduces dependencies
		4731	and makes libev faster.
		4732
		4733	=item EV_NO_THREADS
		4734
		4735	If defined to be C<1>, libev will assume that it will never be called from
		4736	different threads (that includes signal handlers), which is a stronger
		4737	assumption than C<EV_NO_SMP>, above. This reduces dependencies and makes
		4738	libev faster.
		4739
3933	=item EV_ATOMIC_T	4740	=item EV_ATOMIC_T
3934		4741
3935	Libev requires an integer type (suitable for storing C<0> or C<1>) whose	4742	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
3936	access is atomic with respect to other threads or signal contexts. No such	4743	access is atomic with respect to other threads or signal contexts. No
3937	type is easily found in the C language, so you can provide your own type	4744	such type is easily found in the C language, so you can provide your own
3938	that you know is safe for your purposes. It is used both for signal handler "locking"	4745	type that you know is safe for your purposes. It is used both for signal
3939	as well as for signal and thread safety in C<ev_async> watchers.	4746	handler "locking" as well as for signal and thread safety in C<ev_async>
		4747	watchers.
3940		4748
3941	In the absence of this define, libev will use C<sig_atomic_t volatile>	4749	In the absence of this define, libev will use C<sig_atomic_t volatile>
3942	(from F<signal.h>), which is usually good enough on most platforms.	4750	(from F<signal.h>), which is usually good enough on most platforms.
3943		4751
3944	=item EV_H (h)	4752	=item EV_H (h)
…		…
3971	will have the C<struct ev_loop *> as first argument, and you can create	4779	will have the C<struct ev_loop *> as first argument, and you can create
3972	additional independent event loops. Otherwise there will be no support	4780	additional independent event loops. Otherwise there will be no support
3973	for multiple event loops and there is no first event loop pointer	4781	for multiple event loops and there is no first event loop pointer
3974	argument. Instead, all functions act on the single default loop.	4782	argument. Instead, all functions act on the single default loop.
3975		4783
		4784	Note that C<EV_DEFAULT> and C<EV_DEFAULT_> will no longer provide a
		4785	default loop when multiplicity is switched off - you always have to
		4786	initialise the loop manually in this case.
		4787
3976	=item EV_MINPRI	4788	=item EV_MINPRI
3977		4789
3978	=item EV_MAXPRI	4790	=item EV_MAXPRI
3979		4791
3980	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to	4792	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to
…		…
4016	#define EV_USE_POLL 1	4828	#define EV_USE_POLL 1
4017	#define EV_CHILD_ENABLE 1	4829	#define EV_CHILD_ENABLE 1
4018	#define EV_ASYNC_ENABLE 1	4830	#define EV_ASYNC_ENABLE 1
4019		4831
4020	The actual value is a bitset, it can be a combination of the following	4832	The actual value is a bitset, it can be a combination of the following
4021	values:	4833	values (by default, all of these are enabled):
4022		4834
4023	=over 4	4835	=over 4
4024		4836
4025	=item C<1> - faster/larger code	4837	=item C<1> - faster/larger code
4026		4838
…		…
4030	code size by roughly 30% on amd64).	4842	code size by roughly 30% on amd64).
4031		4843
4032	When optimising for size, use of compiler flags such as C<-Os> with	4844	When optimising for size, use of compiler flags such as C<-Os> with
4033	gcc is recommended, as well as C<-DNDEBUG>, as libev contains a number of	4845	gcc is recommended, as well as C<-DNDEBUG>, as libev contains a number of
4034	assertions.	4846	assertions.
		4847
		4848	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4849	(e.g. gcc with C<-Os>).
4035		4850
4036	=item C<2> - faster/larger data structures	4851	=item C<2> - faster/larger data structures
4037		4852
4038	Replaces the small 2-heap for timer management by a faster 4-heap, larger	4853	Replaces the small 2-heap for timer management by a faster 4-heap, larger
4039	hash table sizes and so on. This will usually further increase code size	4854	hash table sizes and so on. This will usually further increase code size
4040	and can additionally have an effect on the size of data structures at	4855	and can additionally have an effect on the size of data structures at
4041	runtime.	4856	runtime.
4042		4857
		4858	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4859	(e.g. gcc with C<-Os>).
		4860
4043	=item C<4> - full API configuration	4861	=item C<4> - full API configuration
4044		4862
4045	This enables priorities (sets C<EV_MAXPRI>=2 and C<EV_MINPRI>=-2), and	4863	This enables priorities (sets C<EV_MAXPRI>=2 and C<EV_MINPRI>=-2), and
4046	enables multiplicity (C<EV_MULTIPLICITY>=1).	4864	enables multiplicity (C<EV_MULTIPLICITY>=1).
4047		4865
…		…
4077		4895
4078	With an intelligent-enough linker (gcc+binutils are intelligent enough	4896	With an intelligent-enough linker (gcc+binutils are intelligent enough
4079	when you use C<-Wl,--gc-sections -ffunction-sections>) functions unused by	4897	when you use C<-Wl,--gc-sections -ffunction-sections>) functions unused by
4080	your program might be left out as well - a binary starting a timer and an	4898	your program might be left out as well - a binary starting a timer and an
4081	I/O watcher then might come out at only 5Kb.	4899	I/O watcher then might come out at only 5Kb.
		4900
		4901	=item EV_API_STATIC
		4902
		4903	If this symbol is defined (by default it is not), then all identifiers
		4904	will have static linkage. This means that libev will not export any
		4905	identifiers, and you cannot link against libev anymore. This can be useful
		4906	when you embed libev, only want to use libev functions in a single file,
		4907	and do not want its identifiers to be visible.
		4908
		4909	To use this, define C<EV_API_STATIC> and include F<ev.c> in the file that
		4910	wants to use libev.
		4911
		4912	This option only works when libev is compiled with a C compiler, as C++
		4913	doesn't support the required declaration syntax.
4082		4914
4083	=item EV_AVOID_STDIO	4915	=item EV_AVOID_STDIO
4084		4916
4085	If this is set to C<1> at compiletime, then libev will avoid using stdio	4917	If this is set to C<1> at compiletime, then libev will avoid using stdio
4086	functions (printf, scanf, perror etc.). This will increase the code size	4918	functions (printf, scanf, perror etc.). This will increase the code size
…		…
4144	in. If set to C<1>, then verification code will be compiled in, but not	4976	in. If set to C<1>, then verification code will be compiled in, but not
4145	called. If set to C<2>, then the internal verification code will be	4977	called. If set to C<2>, then the internal verification code will be
4146	called once per loop, which can slow down libev. If set to C<3>, then the	4978	called once per loop, which can slow down libev. If set to C<3>, then the
4147	verification code will be called very frequently, which will slow down	4979	verification code will be called very frequently, which will slow down
4148	libev considerably.	4980	libev considerably.
		4981
		4982	Verification errors are reported via C's C<assert> mechanism, so if you
		4983	disable that (e.g. by defining C<NDEBUG>) then no errors will be reported.
4149		4984
4150	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it	4985	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
4151	will be C<0>.	4986	will be C<0>.
4152		4987
4153	=item EV_COMMON	4988	=item EV_COMMON
…		…
4230	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	5065	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
4231		5066
4232	#include "ev_cpp.h"	5067	#include "ev_cpp.h"
4233	#include "ev.c"	5068	#include "ev.c"
4234		5069
4235	=head1 INTERACTION WITH OTHER PROGRAMS OR LIBRARIES	5070	=head1 INTERACTION WITH OTHER PROGRAMS, LIBRARIES OR THE ENVIRONMENT
4236		5071
4237	=head2 THREADS AND COROUTINES	5072	=head2 THREADS AND COROUTINES
4238		5073
4239	=head3 THREADS	5074	=head3 THREADS
4240		5075
…		…
4291	default loop and triggering an C<ev_async> watcher from the default loop	5126	default loop and triggering an C<ev_async> watcher from the default loop
4292	watcher callback into the event loop interested in the signal.	5127	watcher callback into the event loop interested in the signal.
4293		5128
4294	=back	5129	=back
4295		5130
4296	=head4 THREAD LOCKING EXAMPLE	5131	See also L</THREAD LOCKING EXAMPLE>.
4297
4298	Here is a fictitious example of how to run an event loop in a different
4299	thread than where callbacks are being invoked and watchers are
4300	created/added/removed.
4301
4302	For a real-world example, see the C<EV::Loop::Async> perl module,
4303	which uses exactly this technique (which is suited for many high-level
4304	languages).
4305
4306	The example uses a pthread mutex to protect the loop data, a condition
4307	variable to wait for callback invocations, an async watcher to notify the
4308	event loop thread and an unspecified mechanism to wake up the main thread.
4309
4310	First, you need to associate some data with the event loop:
4311
4312	typedef struct {
4313	mutex_t lock; /* global loop lock */
4314	ev_async async_w;
4315	thread_t tid;
4316	cond_t invoke_cv;
4317	} userdata;
4318
4319	void prepare_loop (EV_P)
4320	{
4321	// for simplicity, we use a static userdata struct.
4322	static userdata u;
4323
4324	ev_async_init (&u->async_w, async_cb);
4325	ev_async_start (EV_A_ &u->async_w);
4326
4327	pthread_mutex_init (&u->lock, 0);
4328	pthread_cond_init (&u->invoke_cv, 0);
4329
4330	// now associate this with the loop
4331	ev_set_userdata (EV_A_ u);
4332	ev_set_invoke_pending_cb (EV_A_ l_invoke);
4333	ev_set_loop_release_cb (EV_A_ l_release, l_acquire);
4334
4335	// then create the thread running ev_loop
4336	pthread_create (&u->tid, 0, l_run, EV_A);
4337	}
4338
4339	The callback for the C<ev_async> watcher does nothing: the watcher is used
4340	solely to wake up the event loop so it takes notice of any new watchers
4341	that might have been added:
4342
4343	static void
4344	async_cb (EV_P_ ev_async *w, int revents)
4345	{
4346	// just used for the side effects
4347	}
4348
4349	The C<l_release> and C<l_acquire> callbacks simply unlock/lock the mutex
4350	protecting the loop data, respectively.
4351
4352	static void
4353	l_release (EV_P)
4354	{
4355	userdata *u = ev_userdata (EV_A);
4356	pthread_mutex_unlock (&u->lock);
4357	}
4358
4359	static void
4360	l_acquire (EV_P)
4361	{
4362	userdata *u = ev_userdata (EV_A);
4363	pthread_mutex_lock (&u->lock);
4364	}
4365
4366	The event loop thread first acquires the mutex, and then jumps straight
4367	into C<ev_run>:
4368
4369	void *
4370	l_run (void *thr_arg)
4371	{
4372	struct ev_loop *loop = (struct ev_loop *)thr_arg;
4373
4374	l_acquire (EV_A);
4375	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
4376	ev_run (EV_A_ 0);
4377	l_release (EV_A);
4378
4379	return 0;
4380	}
4381
4382	Instead of invoking all pending watchers, the C<l_invoke> callback will
4383	signal the main thread via some unspecified mechanism (signals? pipe
4384	writes? C<Async::Interrupt>?) and then waits until all pending watchers
4385	have been called (in a while loop because a) spurious wakeups are possible
4386	and b) skipping inter-thread-communication when there are no pending
4387	watchers is very beneficial):
4388
4389	static void
4390	l_invoke (EV_P)
4391	{
4392	userdata *u = ev_userdata (EV_A);
4393
4394	while (ev_pending_count (EV_A))
4395	{
4396	wake_up_other_thread_in_some_magic_or_not_so_magic_way ();
4397	pthread_cond_wait (&u->invoke_cv, &u->lock);
4398	}
4399	}
4400
4401	Now, whenever the main thread gets told to invoke pending watchers, it
4402	will grab the lock, call C<ev_invoke_pending> and then signal the loop
4403	thread to continue:
4404
4405	static void
4406	real_invoke_pending (EV_P)
4407	{
4408	userdata *u = ev_userdata (EV_A);
4409
4410	pthread_mutex_lock (&u->lock);
4411	ev_invoke_pending (EV_A);
4412	pthread_cond_signal (&u->invoke_cv);
4413	pthread_mutex_unlock (&u->lock);
4414	}
4415
4416	Whenever you want to start/stop a watcher or do other modifications to an
4417	event loop, you will now have to lock:
4418
4419	ev_timer timeout_watcher;
4420	userdata *u = ev_userdata (EV_A);
4421
4422	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
4423
4424	pthread_mutex_lock (&u->lock);
4425	ev_timer_start (EV_A_ &timeout_watcher);
4426	ev_async_send (EV_A_ &u->async_w);
4427	pthread_mutex_unlock (&u->lock);
4428
4429	Note that sending the C<ev_async> watcher is required because otherwise
4430	an event loop currently blocking in the kernel will have no knowledge
4431	about the newly added timer. By waking up the loop it will pick up any new
4432	watchers in the next event loop iteration.
4433		5132
4434	=head3 COROUTINES	5133	=head3 COROUTINES
4435		5134
4436	Libev is very accommodating to coroutines ("cooperative threads"):	5135	Libev is very accommodating to coroutines ("cooperative threads"):
4437	libev fully supports nesting calls to its functions from different	5136	libev fully supports nesting calls to its functions from different
…		…
4602	requires, and its I/O model is fundamentally incompatible with the POSIX	5301	requires, and its I/O model is fundamentally incompatible with the POSIX
4603	model. Libev still offers limited functionality on this platform in	5302	model. Libev still offers limited functionality on this platform in
4604	the form of the C<EVBACKEND_SELECT> backend, and only supports socket	5303	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
4605	descriptors. This only applies when using Win32 natively, not when using	5304	descriptors. This only applies when using Win32 natively, not when using
4606	e.g. cygwin. Actually, it only applies to the microsofts own compilers,	5305	e.g. cygwin. Actually, it only applies to the microsofts own compilers,
4607	as every compielr comes with a slightly differently broken/incompatible	5306	as every compiler comes with a slightly differently broken/incompatible
4608	environment.	5307	environment.
4609		5308
4610	Lifting these limitations would basically require the full	5309	Lifting these limitations would basically require the full
4611	re-implementation of the I/O system. If you are into this kind of thing,	5310	re-implementation of the I/O system. If you are into this kind of thing,
4612	then note that glib does exactly that for you in a very portable way (note	5311	then note that glib does exactly that for you in a very portable way (note
…		…
4706	structure (guaranteed by POSIX but not by ISO C for example), but it also	5405	structure (guaranteed by POSIX but not by ISO C for example), but it also
4707	assumes that the same (machine) code can be used to call any watcher	5406	assumes that the same (machine) code can be used to call any watcher
4708	callback: The watcher callbacks have different type signatures, but libev	5407	callback: The watcher callbacks have different type signatures, but libev
4709	calls them using an C<ev_watcher *> internally.	5408	calls them using an C<ev_watcher *> internally.
4710		5409
		5410	=item null pointers and integer zero are represented by 0 bytes
		5411
		5412	Libev uses C<memset> to initialise structs and arrays to C<0> bytes, and
		5413	relies on this setting pointers and integers to null.
		5414
		5415	=item pointer accesses must be thread-atomic
		5416
		5417	Accessing a pointer value must be atomic, it must both be readable and
		5418	writable in one piece - this is the case on all current architectures.
		5419
4711	=item C<sig_atomic_t volatile> must be thread-atomic as well	5420	=item C<sig_atomic_t volatile> must be thread-atomic as well
4712		5421
4713	The type C<sig_atomic_t volatile> (or whatever is defined as	5422	The type C<sig_atomic_t volatile> (or whatever is defined as
4714	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different	5423	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different
4715	threads. This is not part of the specification for C<sig_atomic_t>, but is	5424	threads. This is not part of the specification for C<sig_atomic_t>, but is
…		…
4723	thread" or will block signals process-wide, both behaviours would	5432	thread" or will block signals process-wide, both behaviours would
4724	be compatible with libev. Interaction between C<sigprocmask> and	5433	be compatible with libev. Interaction between C<sigprocmask> and
4725	C<pthread_sigmask> could complicate things, however.	5434	C<pthread_sigmask> could complicate things, however.
4726		5435
4727	The most portable way to handle signals is to block signals in all threads	5436	The most portable way to handle signals is to block signals in all threads
4728	except the initial one, and run the default loop in the initial thread as	5437	except the initial one, and run the signal handling loop in the initial
4729	well.	5438	thread as well.
4730		5439
4731	=item C<long> must be large enough for common memory allocation sizes	5440	=item C<long> must be large enough for common memory allocation sizes
4732		5441
4733	To improve portability and simplify its API, libev uses C<long> internally	5442	To improve portability and simplify its API, libev uses C<long> internally
4734	instead of C<size_t> when allocating its data structures. On non-POSIX	5443	instead of C<size_t> when allocating its data structures. On non-POSIX
…		…
4740		5449
4741	The type C<double> is used to represent timestamps. It is required to	5450	The type C<double> is used to represent timestamps. It is required to
4742	have at least 51 bits of mantissa (and 9 bits of exponent), which is	5451	have at least 51 bits of mantissa (and 9 bits of exponent), which is
4743	good enough for at least into the year 4000 with millisecond accuracy	5452	good enough for at least into the year 4000 with millisecond accuracy
4744	(the design goal for libev). This requirement is overfulfilled by	5453	(the design goal for libev). This requirement is overfulfilled by
4745	implementations using IEEE 754, which is basically all existing ones. With	5454	implementations using IEEE 754, which is basically all existing ones.
		5455
4746	IEEE 754 doubles, you get microsecond accuracy until at least 2200.	5456	With IEEE 754 doubles, you get microsecond accuracy until at least the
		5457	year 2255 (and millisecond accuracy till the year 287396 - by then, libev
		5458	is either obsolete or somebody patched it to use C<long double> or
		5459	something like that, just kidding).
4747		5460
4748	=back	5461	=back
4749		5462
4750	If you know of other additional requirements drop me a note.	5463	If you know of other additional requirements drop me a note.
4751		5464
…		…
4813	=item Processing ev_async_send: O(number_of_async_watchers)	5526	=item Processing ev_async_send: O(number_of_async_watchers)
4814		5527
4815	=item Processing signals: O(max_signal_number)	5528	=item Processing signals: O(max_signal_number)
4816		5529
4817	Sending involves a system call I<iff> there were no other C<ev_async_send>	5530	Sending involves a system call I<iff> there were no other C<ev_async_send>
4818	calls in the current loop iteration. Checking for async and signal events	5531	calls in the current loop iteration and the loop is currently
		5532	blocked. Checking for async and signal events involves iterating over all
4819	involves iterating over all running async watchers or all signal numbers.	5533	running async watchers or all signal numbers.
4820		5534
4821	=back	5535	=back
4822		5536
4823		5537
4824	=head1 PORTING FROM LIBEV 3.X TO 4.X	5538	=head1 PORTING FROM LIBEV 3.X TO 4.X
4825		5539
4826	The major version 4 introduced some minor incompatible changes to the API.	5540	The major version 4 introduced some incompatible changes to the API.
4827		5541
4828	At the moment, the C<ev.h> header file tries to implement superficial	5542	At the moment, the C<ev.h> header file provides compatibility definitions
4829	compatibility, so most programs should still compile. Those might be	5543	for all changes, so most programs should still compile. The compatibility
4830	removed in later versions of libev, so better update early than late.	5544	layer might be removed in later versions of libev, so better update to the
		5545	new API early than late.
4831		5546
4832	=over 4	5547	=over 4
		5548
		5549	=item C<EV_COMPAT3> backwards compatibility mechanism
		5550
		5551	The backward compatibility mechanism can be controlled by
		5552	C<EV_COMPAT3>. See L</"PREPROCESSOR SYMBOLS/MACROS"> in the L</EMBEDDING>
		5553	section.
		5554
		5555	=item C<ev_default_destroy> and C<ev_default_fork> have been removed
		5556
		5557	These calls can be replaced easily by their C<ev_loop_xxx> counterparts:
		5558
		5559	ev_loop_destroy (EV_DEFAULT_UC);
		5560	ev_loop_fork (EV_DEFAULT);
4833		5561
4834	=item function/symbol renames	5562	=item function/symbol renames
4835		5563
4836	A number of functions and symbols have been renamed:	5564	A number of functions and symbols have been renamed:
4837		5565
…		…
4856	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme	5584	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme
4857	as all other watcher types. Note that C<ev_loop_fork> is still called	5585	as all other watcher types. Note that C<ev_loop_fork> is still called
4858	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>	5586	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>
4859	typedef.	5587	typedef.
4860		5588
4861	=item C<EV_COMPAT3> backwards compatibility mechanism
4862
4863	The backward compatibility mechanism can be controlled by
4864	C<EV_COMPAT3>. See L<PREPROCESSOR SYMBOLS/MACROS> in the L<EMBEDDING>
4865	section.
4866
4867	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>	5589	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>
4868		5590
4869	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different	5591	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different
4870	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile	5592	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile
4871	and work, but the library code will of course be larger.	5593	and work, but the library code will of course be larger.
…		…
4878	=over 4	5600	=over 4
4879		5601
4880	=item active	5602	=item active
4881		5603
4882	A watcher is active as long as it has been started and not yet stopped.	5604	A watcher is active as long as it has been started and not yet stopped.
4883	See L<WATCHER STATES> for details.	5605	See L</WATCHER STATES> for details.
4884		5606
4885	=item application	5607	=item application
4886		5608
4887	In this document, an application is whatever is using libev.	5609	In this document, an application is whatever is using libev.
4888		5610
…		…
4924	watchers and events.	5646	watchers and events.
4925		5647
4926	=item pending	5648	=item pending
4927		5649
4928	A watcher is pending as soon as the corresponding event has been	5650	A watcher is pending as soon as the corresponding event has been
4929	detected. See L<WATCHER STATES> for details.	5651	detected. See L</WATCHER STATES> for details.
4930		5652
4931	=item real time	5653	=item real time
4932		5654
4933	The physical time that is observed. It is apparently strictly monotonic :)	5655	The physical time that is observed. It is apparently strictly monotonic :)
4934		5656
4935	=item wall-clock time	5657	=item wall-clock time
4936		5658
4937	The time and date as shown on clocks. Unlike real time, it can actually	5659	The time and date as shown on clocks. Unlike real time, it can actually
4938	be wrong and jump forwards and backwards, e.g. when the you adjust your	5660	be wrong and jump forwards and backwards, e.g. when you adjust your
4939	clock.	5661	clock.
4940		5662
4941	=item watcher	5663	=item watcher
4942		5664
4943	A data structure that describes interest in certain events. Watchers need	5665	A data structure that describes interest in certain events. Watchers need
…		…
4945		5667
4946	=back	5668	=back
4947		5669
4948	=head1 AUTHOR	5670	=head1 AUTHOR
4949		5671
4950	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael Magnusson.	5672	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael
		5673	Magnusson and Emanuele Giaquinta, and minor corrections by many others.
4951		5674

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines