ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.273 by root, Tue Nov 24 14:46:59 2009 UTC vs.
Revision 1.459 by root, Wed Jan 22 01:50:42 2020 UTC

		1	=encoding utf-8
		2
1	=head1 NAME	3	=head1 NAME
2		4
3	libev - a high performance full-featured event loop written in C	5	libev - a high performance full-featured event loop written in C
4		6
5	=head1 SYNOPSIS	7	=head1 SYNOPSIS
…		…
26	puts ("stdin ready");	28	puts ("stdin ready");
27	// for one-shot events, one must manually stop the watcher	29	// for one-shot events, one must manually stop the watcher
28	// with its corresponding stop function.	30	// with its corresponding stop function.
29	ev_io_stop (EV_A_ w);	31	ev_io_stop (EV_A_ w);
30		32
31	// this causes all nested ev_loop's to stop iterating	33	// this causes all nested ev_run's to stop iterating
32	ev_unloop (EV_A_ EVUNLOOP_ALL);	34	ev_break (EV_A_ EVBREAK_ALL);
33	}	35	}
34		36
35	// another callback, this time for a time-out	37	// another callback, this time for a time-out
36	static void	38	static void
37	timeout_cb (EV_P_ ev_timer *w, int revents)	39	timeout_cb (EV_P_ ev_timer *w, int revents)
38	{	40	{
39	puts ("timeout");	41	puts ("timeout");
40	// this causes the innermost ev_loop to stop iterating	42	// this causes the innermost ev_run to stop iterating
41	ev_unloop (EV_A_ EVUNLOOP_ONE);	43	ev_break (EV_A_ EVBREAK_ONE);
42	}	44	}
43		45
44	int	46	int
45	main (void)	47	main (void)
46	{	48	{
47	// use the default event loop unless you have special needs	49	// use the default event loop unless you have special needs
48	struct ev_loop *loop = ev_default_loop (0);	50	struct ev_loop *loop = EV_DEFAULT;
49		51
50	// initialise an io watcher, then start it	52	// initialise an io watcher, then start it
51	// this one will watch for stdin to become readable	53	// this one will watch for stdin to become readable
52	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	54	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
53	ev_io_start (loop, &stdin_watcher);	55	ev_io_start (loop, &stdin_watcher);
…		…
56	// simple non-repeating 5.5 second timeout	58	// simple non-repeating 5.5 second timeout
57	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	59	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
58	ev_timer_start (loop, &timeout_watcher);	60	ev_timer_start (loop, &timeout_watcher);
59		61
60	// now wait for events to arrive	62	// now wait for events to arrive
61	ev_loop (loop, 0);	63	ev_run (loop, 0);
62		64
63	// unloop was called, so exit	65	// break was called, so exit
64	return 0;	66	return 0;
65	}	67	}
66		68
67	=head1 ABOUT THIS DOCUMENT	69	=head1 ABOUT THIS DOCUMENT
68		70
…		…
75	While this document tries to be as complete as possible in documenting	77	While this document tries to be as complete as possible in documenting
76	libev, its usage and the rationale behind its design, it is not a tutorial	78	libev, its usage and the rationale behind its design, it is not a tutorial
77	on event-based programming, nor will it introduce event-based programming	79	on event-based programming, nor will it introduce event-based programming
78	with libev.	80	with libev.
79		81
80	Familarity with event based programming techniques in general is assumed	82	Familiarity with event based programming techniques in general is assumed
81	throughout this document.	83	throughout this document.
		84
		85	=head1 WHAT TO READ WHEN IN A HURRY
		86
		87	This manual tries to be very detailed, but unfortunately, this also makes
		88	it very long. If you just want to know the basics of libev, I suggest
		89	reading L</ANATOMY OF A WATCHER>, then the L</EXAMPLE PROGRAM> above and
		90	look up the missing functions in L</GLOBAL FUNCTIONS> and the C<ev_io> and
		91	C<ev_timer> sections in L</WATCHER TYPES>.
82		92
83	=head1 ABOUT LIBEV	93	=head1 ABOUT LIBEV
84		94
85	Libev is an event loop: you register interest in certain events (such as a	95	Libev is an event loop: you register interest in certain events (such as a
86	file descriptor being readable or a timeout occurring), and it will manage	96	file descriptor being readable or a timeout occurring), and it will manage
…		…
95	details of the event, and then hand it over to libev by I<starting> the	105	details of the event, and then hand it over to libev by I<starting> the
96	watcher.	106	watcher.
97		107
98	=head2 FEATURES	108	=head2 FEATURES
99		109
100	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	110	Libev supports C<select>, C<poll>, the Linux-specific aio and C<epoll>
101	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	111	interfaces, the BSD-specific C<kqueue> and the Solaris-specific event port
102	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	112	mechanisms for file descriptor events (C<ev_io>), the Linux C<inotify>
103	(for C<ev_stat>), Linux eventfd/signalfd (for faster and cleaner	113	interface (for C<ev_stat>), Linux eventfd/signalfd (for faster and cleaner
104	inter-thread wakeup (C<ev_async>)/signal handling (C<ev_signal>)) relative	114	inter-thread wakeup (C<ev_async>)/signal handling (C<ev_signal>)) relative
105	timers (C<ev_timer>), absolute timers with customised rescheduling	115	timers (C<ev_timer>), absolute timers with customised rescheduling
106	(C<ev_periodic>), synchronous signals (C<ev_signal>), process status	116	(C<ev_periodic>), synchronous signals (C<ev_signal>), process status
107	change events (C<ev_child>), and event watchers dealing with the event	117	change events (C<ev_child>), and event watchers dealing with the event
108	loop mechanism itself (C<ev_idle>, C<ev_embed>, C<ev_prepare> and	118	loop mechanism itself (C<ev_idle>, C<ev_embed>, C<ev_prepare> and
…		…
118	Libev is very configurable. In this manual the default (and most common)	128	Libev is very configurable. In this manual the default (and most common)
119	configuration will be described, which supports multiple event loops. For	129	configuration will be described, which supports multiple event loops. For
120	more info about various configuration options please have a look at	130	more info about various configuration options please have a look at
121	B<EMBED> section in this manual. If libev was configured without support	131	B<EMBED> section in this manual. If libev was configured without support
122	for multiple event loops, then all functions taking an initial argument of	132	for multiple event loops, then all functions taking an initial argument of
123	name C<loop> (which is always of type C<ev_loop *>) will not have	133	name C<loop> (which is always of type C<struct ev_loop *>) will not have
124	this argument.	134	this argument.
125		135
126	=head2 TIME REPRESENTATION	136	=head2 TIME REPRESENTATION
127		137
128	Libev represents time as a single floating point number, representing	138	Libev represents time as a single floating point number, representing
129	the (fractional) number of seconds since the (POSIX) epoch (somewhere	139	the (fractional) number of seconds since the (POSIX) epoch (in practice
130	near the beginning of 1970, details are complicated, don't ask). This	140	somewhere near the beginning of 1970, details are complicated, don't
131	type is called C<ev_tstamp>, which is what you should use too. It usually	141	ask). This type is called C<ev_tstamp>, which is what you should use
132	aliases to the C<double> type in C. When you need to do any calculations	142	too. It usually aliases to the C<double> type in C. When you need to do
133	on it, you should treat it as some floating point value. Unlike the name	143	any calculations on it, you should treat it as some floating point value.
		144
134	component C<stamp> might indicate, it is also used for time differences	145	Unlike the name component C<stamp> might indicate, it is also used for
135	throughout libev.	146	time differences (e.g. delays) throughout libev.
136		147
137	=head1 ERROR HANDLING	148	=head1 ERROR HANDLING
138		149
139	Libev knows three classes of errors: operating system errors, usage errors	150	Libev knows three classes of errors: operating system errors, usage errors
140	and internal errors (bugs).	151	and internal errors (bugs).
…		…
148	When libev detects a usage error such as a negative timer interval, then	159	When libev detects a usage error such as a negative timer interval, then
149	it will print a diagnostic message and abort (via the C<assert> mechanism,	160	it will print a diagnostic message and abort (via the C<assert> mechanism,
150	so C<NDEBUG> will disable this checking): these are programming errors in	161	so C<NDEBUG> will disable this checking): these are programming errors in
151	the libev caller and need to be fixed there.	162	the libev caller and need to be fixed there.
152		163
		164	Via the C<EV_FREQUENT> macro you can compile in and/or enable extensive
		165	consistency checking code inside libev that can be used to check for
		166	internal inconsistencies, suually caused by application bugs.
		167
153	Libev also has a few internal error-checking C<assert>ions, and also has	168	Libev also has a few internal error-checking C<assert>ions. These do not
154	extensive consistency checking code. These do not trigger under normal
155	circumstances, as they indicate either a bug in libev or worse.	169	trigger under normal circumstances, as they indicate either a bug in libev
		170	or worse.
156		171
157		172
158	=head1 GLOBAL FUNCTIONS	173	=head1 GLOBAL FUNCTIONS
159		174
160	These functions can be called anytime, even before initialising the	175	These functions can be called anytime, even before initialising the
…		…
164		179
165	=item ev_tstamp ev_time ()	180	=item ev_tstamp ev_time ()
166		181
167	Returns the current time as libev would use it. Please note that the	182	Returns the current time as libev would use it. Please note that the
168	C<ev_now> function is usually faster and also often returns the timestamp	183	C<ev_now> function is usually faster and also often returns the timestamp
169	you actually want to know.	184	you actually want to know. Also interesting is the combination of
		185	C<ev_now_update> and C<ev_now>.
170		186
171	=item ev_sleep (ev_tstamp interval)	187	=item ev_sleep (ev_tstamp interval)
172		188
173	Sleep for the given interval: The current thread will be blocked until	189	Sleep for the given interval: The current thread will be blocked
174	either it is interrupted or the given time interval has passed. Basically	190	until either it is interrupted or the given time interval has
		191	passed (approximately - it might return a bit earlier even if not
		192	interrupted). Returns immediately if C<< interval <= 0 >>.
		193
175	this is a sub-second-resolution C<sleep ()>.	194	Basically this is a sub-second-resolution C<sleep ()>.
		195
		196	The range of the C<interval> is limited - libev only guarantees to work
		197	with sleep times of up to one day (C<< interval <= 86400 >>).
176		198
177	=item int ev_version_major ()	199	=item int ev_version_major ()
178		200
179	=item int ev_version_minor ()	201	=item int ev_version_minor ()
180		202
…		…
191	as this indicates an incompatible change. Minor versions are usually	213	as this indicates an incompatible change. Minor versions are usually
192	compatible to older versions, so a larger minor version alone is usually	214	compatible to older versions, so a larger minor version alone is usually
193	not a problem.	215	not a problem.
194		216
195	Example: Make sure we haven't accidentally been linked against the wrong	217	Example: Make sure we haven't accidentally been linked against the wrong
196	version.	218	version (note, however, that this will not detect other ABI mismatches,
		219	such as LFS or reentrancy).
197		220
198	assert (("libev version mismatch",	221	assert (("libev version mismatch",
199	ev_version_major () == EV_VERSION_MAJOR	222	ev_version_major () == EV_VERSION_MAJOR
200	&& ev_version_minor () >= EV_VERSION_MINOR));	223	&& ev_version_minor () >= EV_VERSION_MINOR));
201		224
…		…
212	assert (("sorry, no epoll, no sex",	235	assert (("sorry, no epoll, no sex",
213	ev_supported_backends () & EVBACKEND_EPOLL));	236	ev_supported_backends () & EVBACKEND_EPOLL));
214		237
215	=item unsigned int ev_recommended_backends ()	238	=item unsigned int ev_recommended_backends ()
216		239
217	Return the set of all backends compiled into this binary of libev and also	240	Return the set of all backends compiled into this binary of libev and
218	recommended for this platform. This set is often smaller than the one	241	also recommended for this platform, meaning it will work for most file
		242	descriptor types. This set is often smaller than the one returned by
219	returned by C<ev_supported_backends>, as for example kqueue is broken on	243	C<ev_supported_backends>, as for example kqueue is broken on most BSDs
220	most BSDs and will not be auto-detected unless you explicitly request it	244	and will not be auto-detected unless you explicitly request it (assuming
221	(assuming you know what you are doing). This is the set of backends that	245	you know what you are doing). This is the set of backends that libev will
222	libev will probe for if you specify no backends explicitly.	246	probe for if you specify no backends explicitly.
223		247
224	=item unsigned int ev_embeddable_backends ()	248	=item unsigned int ev_embeddable_backends ()
225		249
226	Returns the set of backends that are embeddable in other event loops. This	250	Returns the set of backends that are embeddable in other event loops. This
227	is the theoretical, all-platform, value. To find which backends	251	value is platform-specific but can include backends not available on the
228	might be supported on the current system, you would need to look at	252	current system. To find which embeddable backends might be supported on
229	C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for	253	the current system, you would need to look at C<ev_embeddable_backends ()
230	recommended ones.	254	& ev_supported_backends ()>, likewise for recommended ones.
231		255
232	See the description of C<ev_embed> watchers for more info.	256	See the description of C<ev_embed> watchers for more info.
233		257
234	=item ev_set_allocator (void *(*cb)(void *ptr, long size)) [NOT REENTRANT]	258	=item ev_set_allocator (void *(*cb)(void *ptr, long size) throw ())
235		259
236	Sets the allocation function to use (the prototype is similar - the	260	Sets the allocation function to use (the prototype is similar - the
237	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is	261	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
238	used to allocate and free memory (no surprises here). If it returns zero	262	used to allocate and free memory (no surprises here). If it returns zero
239	when memory needs to be allocated (C<size != 0>), the library might abort	263	when memory needs to be allocated (C<size != 0>), the library might abort
…		…
245		269
246	You could override this function in high-availability programs to, say,	270	You could override this function in high-availability programs to, say,
247	free some memory if it cannot allocate memory, to use a special allocator,	271	free some memory if it cannot allocate memory, to use a special allocator,
248	or even to sleep a while and retry until some memory is available.	272	or even to sleep a while and retry until some memory is available.
249		273
		274	Example: The following is the C<realloc> function that libev itself uses
		275	which should work with C<realloc> and C<free> functions of all kinds and
		276	is probably a good basis for your own implementation.
		277
		278	static void *
		279	ev_realloc_emul (void *ptr, long size) EV_NOEXCEPT
		280	{
		281	if (size)
		282	return realloc (ptr, size);
		283
		284	free (ptr);
		285	return 0;
		286	}
		287
250	Example: Replace the libev allocator with one that waits a bit and then	288	Example: Replace the libev allocator with one that waits a bit and then
251	retries (example requires a standards-compliant C<realloc>).	289	retries.
252		290
253	static void *	291	static void *
254	persistent_realloc (void *ptr, size_t size)	292	persistent_realloc (void *ptr, size_t size)
255	{	293	{
		294	if (!size)
		295	{
		296	free (ptr);
		297	return 0;
		298	}
		299
256	for (;;)	300	for (;;)
257	{	301	{
258	void *newptr = realloc (ptr, size);	302	void *newptr = realloc (ptr, size);
259		303
260	if (newptr)	304	if (newptr)
…		…
265	}	309	}
266		310
267	...	311	...
268	ev_set_allocator (persistent_realloc);	312	ev_set_allocator (persistent_realloc);
269		313
270	=item ev_set_syserr_cb (void (*cb)(const char *msg)); [NOT REENTRANT]	314	=item ev_set_syserr_cb (void (*cb)(const char *msg) throw ())
271		315
272	Set the callback function to call on a retryable system call error (such	316	Set the callback function to call on a retryable system call error (such
273	as failed select, poll, epoll_wait). The message is a printable string	317	as failed select, poll, epoll_wait). The message is a printable string
274	indicating the system call or subsystem causing the problem. If this	318	indicating the system call or subsystem causing the problem. If this
275	callback is set, then libev will expect it to remedy the situation, no	319	callback is set, then libev will expect it to remedy the situation, no
…		…
287	}	331	}
288		332
289	...	333	...
290	ev_set_syserr_cb (fatal_error);	334	ev_set_syserr_cb (fatal_error);
291		335
		336	=item ev_feed_signal (int signum)
		337
		338	This function can be used to "simulate" a signal receive. It is completely
		339	safe to call this function at any time, from any context, including signal
		340	handlers or random threads.
		341
		342	Its main use is to customise signal handling in your process, especially
		343	in the presence of threads. For example, you could block signals
		344	by default in all threads (and specifying C<EVFLAG_NOSIGMASK> when
		345	creating any loops), and in one thread, use C<sigwait> or any other
		346	mechanism to wait for signals, then "deliver" them to libev by calling
		347	C<ev_feed_signal>.
		348
292	=back	349	=back
293		350
294	=head1 FUNCTIONS CONTROLLING THE EVENT LOOP	351	=head1 FUNCTIONS CONTROLLING EVENT LOOPS
295		352
296	An event loop is described by a C<struct ev_loop *> (the C<struct>	353	An event loop is described by a C<struct ev_loop *> (the C<struct> is
297	is I<not> optional in this case, as there is also an C<ev_loop>	354	I<not> optional in this case unless libev 3 compatibility is disabled, as
298	I<function>).	355	libev 3 had an C<ev_loop> function colliding with the struct name).
299		356
300	The library knows two types of such loops, the I<default> loop, which	357	The library knows two types of such loops, the I<default> loop, which
301	supports signals and child events, and dynamically created loops which do	358	supports child process events, and dynamically created event loops which
302	not.	359	do not.
303		360
304	=over 4	361	=over 4
305		362
306	=item struct ev_loop *ev_default_loop (unsigned int flags)	363	=item struct ev_loop *ev_default_loop (unsigned int flags)
307		364
308	This will initialise the default event loop if it hasn't been initialised	365	This returns the "default" event loop object, which is what you should
309	yet and return it. If the default loop could not be initialised, returns	366	normally use when you just need "the event loop". Event loop objects and
310	false. If it already was initialised it simply returns it (and ignores the	367	the C<flags> parameter are described in more detail in the entry for
311	flags. If that is troubling you, check C<ev_backend ()> afterwards).	368	C<ev_loop_new>.
		369
		370	If the default loop is already initialised then this function simply
		371	returns it (and ignores the flags. If that is troubling you, check
		372	C<ev_backend ()> afterwards). Otherwise it will create it with the given
		373	flags, which should almost always be C<0>, unless the caller is also the
		374	one calling C<ev_run> or otherwise qualifies as "the main program".
312		375
313	If you don't know what event loop to use, use the one returned from this	376	If you don't know what event loop to use, use the one returned from this
314	function.	377	function (or via the C<EV_DEFAULT> macro).
315		378
316	Note that this function is I<not> thread-safe, so if you want to use it	379	Note that this function is I<not> thread-safe, so if you want to use it
317	from multiple threads, you have to lock (note also that this is unlikely,	380	from multiple threads, you have to employ some kind of mutex (note also
318	as loops cannot be shared easily between threads anyway).	381	that this case is unlikely, as loops cannot be shared easily between
		382	threads anyway).
319		383
320	The default loop is the only loop that can handle C<ev_signal> and	384	The default loop is the only loop that can handle C<ev_child> watchers,
321	C<ev_child> watchers, and to do this, it always registers a handler	385	and to do this, it always registers a handler for C<SIGCHLD>. If this is
322	for C<SIGCHLD>. If this is a problem for your application you can either	386	a problem for your application you can either create a dynamic loop with
323	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you	387	C<ev_loop_new> which doesn't do that, or you can simply overwrite the
324	can simply overwrite the C<SIGCHLD> signal handler I<after> calling	388	C<SIGCHLD> signal handler I<after> calling C<ev_default_init>.
325	C<ev_default_init>.	389
		390	Example: This is the most typical usage.
		391
		392	if (!ev_default_loop (0))
		393	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
		394
		395	Example: Restrict libev to the select and poll backends, and do not allow
		396	environment settings to be taken into account:
		397
		398	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
		399
		400	=item struct ev_loop *ev_loop_new (unsigned int flags)
		401
		402	This will create and initialise a new event loop object. If the loop
		403	could not be initialised, returns false.
		404
		405	This function is thread-safe, and one common way to use libev with
		406	threads is indeed to create one loop per thread, and using the default
		407	loop in the "main" or "initial" thread.
326		408
327	The flags argument can be used to specify special behaviour or specific	409	The flags argument can be used to specify special behaviour or specific
328	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	410	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
329		411
330	The following flags are supported:	412	The following flags are supported:
…		…
340		422
341	If this flag bit is or'ed into the flag value (or the program runs setuid	423	If this flag bit is or'ed into the flag value (or the program runs setuid
342	or setgid) then libev will I<not> look at the environment variable	424	or setgid) then libev will I<not> look at the environment variable
343	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will	425	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will
344	override the flags completely if it is found in the environment. This is	426	override the flags completely if it is found in the environment. This is
345	useful to try out specific backends to test their performance, or to work	427	useful to try out specific backends to test their performance, to work
346	around bugs.	428	around bugs, or to make libev threadsafe (accessing environment variables
		429	cannot be done in a threadsafe way, but usually it works if no other
		430	thread modifies them).
347		431
348	=item C<EVFLAG_FORKCHECK>	432	=item C<EVFLAG_FORKCHECK>
349		433
350	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after	434	Instead of calling C<ev_loop_fork> manually after a fork, you can also
351	a fork, you can also make libev check for a fork in each iteration by	435	make libev check for a fork in each iteration by enabling this flag.
352	enabling this flag.
353		436
354	This works by calling C<getpid ()> on every iteration of the loop,	437	This works by calling C<getpid ()> on every iteration of the loop,
355	and thus this might slow down your event loop if you do a lot of loop	438	and thus this might slow down your event loop if you do a lot of loop
356	iterations and little real work, but is usually not noticeable (on my	439	iterations and little real work, but is usually not noticeable (on my
357	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence	440	GNU/Linux system for example, C<getpid> is actually a simple 5-insn
358	without a system call and thus I<very> fast, but my GNU/Linux system also has	441	sequence without a system call and thus I<very> fast, but my GNU/Linux
359	C<pthread_atfork> which is even faster).	442	system also has C<pthread_atfork> which is even faster). (Update: glibc
		443	versions 2.25 apparently removed the C<getpid> optimisation again).
360		444
361	The big advantage of this flag is that you can forget about fork (and	445	The big advantage of this flag is that you can forget about fork (and
362	forget about forgetting to tell libev about forking) when you use this	446	forget about forgetting to tell libev about forking, although you still
363	flag.	447	have to ignore C<SIGPIPE>) when you use this flag.
364		448
365	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>	449	This flag setting cannot be overridden or specified in the C<LIBEV_FLAGS>
366	environment variable.	450	environment variable.
367		451
368	=item C<EVFLAG_NOINOTIFY>	452	=item C<EVFLAG_NOINOTIFY>
369		453
370	When this flag is specified, then libev will not attempt to use the	454	When this flag is specified, then libev will not attempt to use the
371	I<inotify> API for it's C<ev_stat> watchers. Apart from debugging and	455	I<inotify> API for its C<ev_stat> watchers. Apart from debugging and
372	testing, this flag can be useful to conserve inotify file descriptors, as	456	testing, this flag can be useful to conserve inotify file descriptors, as
373	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.	457	otherwise each loop using C<ev_stat> watchers consumes one inotify handle.
374		458
375	=item C<EVFLAG_NOSIGFD>	459	=item C<EVFLAG_SIGNALFD>
376		460
377	When this flag is specified, then libev will not attempt to use the	461	When this flag is specified, then libev will attempt to use the
378	I<signalfd> API for it's C<ev_signal> (and C<ev_child>) watchers. This is	462	I<signalfd> API for its C<ev_signal> (and C<ev_child>) watchers. This API
379	probably only useful to work around any bugs in libev. Consequently, this	463	delivers signals synchronously, which makes it both faster and might make
380	flag might go away once the signalfd functionality is considered stable,	464	it possible to get the queued signal data. It can also simplify signal
381	so it's useful mostly in environment variables and not in program code.	465	handling with threads, as long as you properly block signals in your
		466	threads that are not interested in handling them.
		467
		468	Signalfd will not be used by default as this changes your signal mask, and
		469	there are a lot of shoddy libraries and programs (glib's threadpool for
		470	example) that can't properly initialise their signal masks.
		471
		472	=item C<EVFLAG_NOSIGMASK>
		473
		474	When this flag is specified, then libev will avoid to modify the signal
		475	mask. Specifically, this means you have to make sure signals are unblocked
		476	when you want to receive them.
		477
		478	This behaviour is useful when you want to do your own signal handling, or
		479	want to handle signals only in specific threads and want to avoid libev
		480	unblocking the signals.
		481
		482	It's also required by POSIX in a threaded program, as libev calls
		483	C<sigprocmask>, whose behaviour is officially unspecified.
		484
		485	=item C<EVFLAG_NOTIMERFD>
		486
		487	When this flag is specified, the libev will avoid using a C<timerfd> to
		488	detect time jumps. It will still be able to detect time jumps, but takes
		489	longer and has a lower accuracy in doing so, but saves a file descriptor
		490	per loop.
		491
		492	The current implementation only tries to use a C<timerfd> when the first
		493	C<ev_periodic> watcher is started and falls back on other methods if it
		494	cannot be created, but this behaviour might change in the future.
382		495
383	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	496	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
384		497
385	This is your standard select(2) backend. Not I<completely> standard, as	498	This is your standard select(2) backend. Not I<completely> standard, as
386	libev tries to roll its own fd_set with no limits on the number of fds,	499	libev tries to roll its own fd_set with no limits on the number of fds,
…		…
411	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and	524	This backend maps C<EV_READ> to C<POLLIN | POLLERR | POLLHUP>, and
412	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.	525	C<EV_WRITE> to C<POLLOUT | POLLERR | POLLHUP>.
413		526
414	=item C<EVBACKEND_EPOLL> (value 4, Linux)	527	=item C<EVBACKEND_EPOLL> (value 4, Linux)
415		528
416	Use the linux-specific epoll(7) interface (for both pre- and post-2.6.9	529	Use the Linux-specific epoll(7) interface (for both pre- and post-2.6.9
417	kernels).	530	kernels).
418		531
419	For few fds, this backend is a bit little slower than poll and select,	532	For few fds, this backend is a bit little slower than poll and select, but
420	but it scales phenomenally better. While poll and select usually scale	533	it scales phenomenally better. While poll and select usually scale like
421	like O(total_fds) where n is the total number of fds (or the highest fd),	534	O(total_fds) where total_fds is the total number of fds (or the highest
422	epoll scales either O(1) or O(active_fds).	535	fd), epoll scales either O(1) or O(active_fds).
423		536
424	The epoll mechanism deserves honorable mention as the most misdesigned	537	The epoll mechanism deserves honorable mention as the most misdesigned
425	of the more advanced event mechanisms: mere annoyances include silently	538	of the more advanced event mechanisms: mere annoyances include silently
426	dropping file descriptors, requiring a system call per change per file	539	dropping file descriptors, requiring a system call per change per file
427	descriptor (and unnecessary guessing of parameters), problems with dup and	540	descriptor (and unnecessary guessing of parameters), problems with dup,
		541	returning before the timeout value, resulting in additional iterations
		542	(and only giving 5ms accuracy while select on the same platform gives
428	so on. The biggest issue is fork races, however - if a program forks then	543	0.1ms) and so on. The biggest issue is fork races, however - if a program
429	I<both> parent and child process have to recreate the epoll set, which can	544	forks then I<both> parent and child process have to recreate the epoll
430	take considerable time (one syscall per file descriptor) and is of course	545	set, which can take considerable time (one syscall per file descriptor)
431	hard to detect.	546	and is of course hard to detect.
432		547
433	Epoll is also notoriously buggy - embedding epoll fds I<should> work, but	548	Epoll is also notoriously buggy - embedding epoll fds I<should> work,
434	of course I<doesn't>, and epoll just loves to report events for totally	549	but of course I<doesn't>, and epoll just loves to report events for
435	I<different> file descriptors (even already closed ones, so one cannot	550	totally I<different> file descriptors (even already closed ones, so
436	even remove them from the set) than registered in the set (especially	551	one cannot even remove them from the set) than registered in the set
437	on SMP systems). Libev tries to counter these spurious notifications by	552	(especially on SMP systems). Libev tries to counter these spurious
438	employing an additional generation counter and comparing that against the	553	notifications by employing an additional generation counter and comparing
439	events to filter out spurious ones, recreating the set when required.	554	that against the events to filter out spurious ones, recreating the set
		555	when required. Epoll also erroneously rounds down timeouts, but gives you
		556	no way to know when and by how much, so sometimes you have to busy-wait
		557	because epoll returns immediately despite a nonzero timeout. And last
		558	not least, it also refuses to work with some file descriptors which work
		559	perfectly fine with C<select> (files, many character devices...).
		560
		561	Epoll is truly the train wreck among event poll mechanisms, a frankenpoll,
		562	cobbled together in a hurry, no thought to design or interaction with
		563	others. Oh, the pain, will it ever stop...
440		564
441	While stopping, setting and starting an I/O watcher in the same iteration	565	While stopping, setting and starting an I/O watcher in the same iteration
442	will result in some caching, there is still a system call per such	566	will result in some caching, there is still a system call per such
443	incident (because the same I<file descriptor> could point to a different	567	incident (because the same I<file descriptor> could point to a different
444	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed	568	I<file description> now), so its best to avoid that. Also, C<dup ()>'ed
…		…
456	All this means that, in practice, C<EVBACKEND_SELECT> can be as fast or	580	All this means that, in practice, C<EVBACKEND_SELECT> can be as fast or
457	faster than epoll for maybe up to a hundred file descriptors, depending on	581	faster than epoll for maybe up to a hundred file descriptors, depending on
458	the usage. So sad.	582	the usage. So sad.
459		583
460	While nominally embeddable in other event loops, this feature is broken in	584	While nominally embeddable in other event loops, this feature is broken in
461	all kernel versions tested so far.	585	a lot of kernel revisions, but probably(!) works in current versions.
462		586
463	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as	587	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
464	C<EVBACKEND_POLL>.	588	C<EVBACKEND_POLL>.
465		589
		590	=item C<EVBACKEND_LINUXAIO> (value 64, Linux)
		591
		592	Use the Linux-specific Linux AIO (I<not> C<< aio(7) >> but C<<
		593	io_submit(2) >>) event interface available in post-4.18 kernels (but libev
		594	only tries to use it in 4.19+).
		595
		596	This is another Linux train wreck of an event interface.
		597
		598	If this backend works for you (as of this writing, it was very
		599	experimental), it is the best event interface available on Linux and might
		600	be well worth enabling it - if it isn't available in your kernel this will
		601	be detected and this backend will be skipped.
		602
		603	This backend can batch oneshot requests and supports a user-space ring
		604	buffer to receive events. It also doesn't suffer from most of the design
		605	problems of epoll (such as not being able to remove event sources from
		606	the epoll set), and generally sounds too good to be true. Because, this
		607	being the Linux kernel, of course it suffers from a whole new set of
		608	limitations, forcing you to fall back to epoll, inheriting all its design
		609	issues.
		610
		611	For one, it is not easily embeddable (but probably could be done using
		612	an event fd at some extra overhead). It also is subject to a system wide
		613	limit that can be configured in F</proc/sys/fs/aio-max-nr>. If no AIO
		614	requests are left, this backend will be skipped during initialisation, and
		615	will switch to epoll when the loop is active.
		616
		617	Most problematic in practice, however, is that not all file descriptors
		618	work with it. For example, in Linux 5.1, TCP sockets, pipes, event fds,
		619	files, F</dev/null> and many others are supported, but ttys do not work
		620	properly (a known bug that the kernel developers don't care about, see
		621	L<https://lore.kernel.org/patchwork/patch/1047453/>), so this is not
		622	(yet?) a generic event polling interface.
		623
		624	Overall, it seems the Linux developers just don't want it to have a
		625	generic event handling mechanism other than C<select> or C<poll>.
		626
		627	To work around all these problem, the current version of libev uses its
		628	epoll backend as a fallback for file descriptor types that do not work. Or
		629	falls back completely to epoll if the kernel acts up.
		630
		631	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
		632	C<EVBACKEND_POLL>.
		633
466	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	634	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
467		635
468	Kqueue deserves special mention, as at the time of this writing, it	636	Kqueue deserves special mention, as at the time this backend was
469	was broken on all BSDs except NetBSD (usually it doesn't work reliably	637	implemented, it was broken on all BSDs except NetBSD (usually it doesn't
470	with anything but sockets and pipes, except on Darwin, where of course	638	work reliably with anything but sockets and pipes, except on Darwin,
471	it's completely useless). Unlike epoll, however, whose brokenness	639	where of course it's completely useless). Unlike epoll, however, whose
472	is by design, these kqueue bugs can (and eventually will) be fixed	640	brokenness is by design, these kqueue bugs can be (and mostly have been)
473	without API changes to existing programs. For this reason it's not being	641	fixed without API changes to existing programs. For this reason it's not
474	"auto-detected" unless you explicitly specify it in the flags (i.e. using	642	being "auto-detected" on all platforms unless you explicitly specify it
475	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)	643	in the flags (i.e. using C<EVBACKEND_KQUEUE>) or libev was compiled on a
476	system like NetBSD.	644	known-to-be-good (-enough) system like NetBSD.
477		645
478	You still can embed kqueue into a normal poll or select backend and use it	646	You still can embed kqueue into a normal poll or select backend and use it
479	only for sockets (after having made sure that sockets work with kqueue on	647	only for sockets (after having made sure that sockets work with kqueue on
480	the target platform). See C<ev_embed> watchers for more info.	648	the target platform). See C<ev_embed> watchers for more info.
481		649
482	It scales in the same way as the epoll backend, but the interface to the	650	It scales in the same way as the epoll backend, but the interface to the
483	kernel is more efficient (which says nothing about its actual speed, of	651	kernel is more efficient (which says nothing about its actual speed, of
484	course). While stopping, setting and starting an I/O watcher does never	652	course). While stopping, setting and starting an I/O watcher does never
485	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to	653	cause an extra system call as with C<EVBACKEND_EPOLL>, it still adds up to
486	two event changes per incident. Support for C<fork ()> is very bad (but	654	two event changes per incident. Support for C<fork ()> is very bad (you
487	sane, unlike epoll) and it drops fds silently in similarly hard-to-detect	655	might have to leak fds on fork, but it's more sane than epoll) and it
488	cases	656	drops fds silently in similarly hard-to-detect cases.
489		657
490	This backend usually performs well under most conditions.	658	This backend usually performs well under most conditions.
491		659
492	While nominally embeddable in other event loops, this doesn't work	660	While nominally embeddable in other event loops, this doesn't work
493	everywhere, so you might need to test for this. And since it is broken	661	everywhere, so you might need to test for this. And since it is broken
…		…
510	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	678	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
511		679
512	This uses the Solaris 10 event port mechanism. As with everything on Solaris,	680	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
513	it's really slow, but it still scales very well (O(active_fds)).	681	it's really slow, but it still scales very well (O(active_fds)).
514		682
515	Please note that Solaris event ports can deliver a lot of spurious
516	notifications, so you need to use non-blocking I/O or other means to avoid
517	blocking when no data (or space) is available.
518
519	While this backend scales well, it requires one system call per active	683	While this backend scales well, it requires one system call per active
520	file descriptor per loop iteration. For small and medium numbers of file	684	file descriptor per loop iteration. For small and medium numbers of file
521	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend	685	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
522	might perform better.	686	might perform better.
523		687
524	On the positive side, with the exception of the spurious readiness	688	On the positive side, this backend actually performed fully to
525	notifications, this backend actually performed fully to specification
526	in all tests and is fully embeddable, which is a rare feat among the	689	specification in all tests and is fully embeddable, which is a rare feat
527	OS-specific backends (I vastly prefer correctness over speed hacks).	690	among the OS-specific backends (I vastly prefer correctness over speed
		691	hacks).
		692
		693	On the negative side, the interface is I<bizarre> - so bizarre that
		694	even sun itself gets it wrong in their code examples: The event polling
		695	function sometimes returns events to the caller even though an error
		696	occurred, but with no indication whether it has done so or not (yes, it's
		697	even documented that way) - deadly for edge-triggered interfaces where you
		698	absolutely have to know whether an event occurred or not because you have
		699	to re-arm the watcher.
		700
		701	Fortunately libev seems to be able to work around these idiocies.
528		702
529	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as	703	This backend maps C<EV_READ> and C<EV_WRITE> in the same way as
530	C<EVBACKEND_POLL>.	704	C<EVBACKEND_POLL>.
531		705
532	=item C<EVBACKEND_ALL>	706	=item C<EVBACKEND_ALL>
533		707
534	Try all backends (even potentially broken ones that wouldn't be tried	708	Try all backends (even potentially broken ones that wouldn't be tried
535	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	709	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
536	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	710	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
537		711
538	It is definitely not recommended to use this flag.	712	It is definitely not recommended to use this flag, use whatever
		713	C<ev_recommended_backends ()> returns, or simply do not specify a backend
		714	at all.
		715
		716	=item C<EVBACKEND_MASK>
		717
		718	Not a backend at all, but a mask to select all backend bits from a
		719	C<flags> value, in case you want to mask out any backends from a flags
		720	value (e.g. when modifying the C<LIBEV_FLAGS> environment variable).
539		721
540	=back	722	=back
541		723
542	If one or more of the backend flags are or'ed into the flags value,	724	If one or more of the backend flags are or'ed into the flags value,
543	then only these backends will be tried (in the reverse order as listed	725	then only these backends will be tried (in the reverse order as listed
544	here). If none are specified, all backends in C<ev_recommended_backends	726	here). If none are specified, all backends in C<ev_recommended_backends
545	()> will be tried.	727	()> will be tried.
546		728
547	Example: This is the most typical usage.
548
549	if (!ev_default_loop (0))
550	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
551
552	Example: Restrict libev to the select and poll backends, and do not allow
553	environment settings to be taken into account:
554
555	ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);
556
557	Example: Use whatever libev has to offer, but make sure that kqueue is
558	used if available (warning, breaks stuff, best use only with your own
559	private event loop and only if you know the OS supports your types of
560	fds):
561
562	ev_default_loop (ev_recommended_backends () | EVBACKEND_KQUEUE);
563
564	=item struct ev_loop *ev_loop_new (unsigned int flags)
565
566	Similar to C<ev_default_loop>, but always creates a new event loop that is
567	always distinct from the default loop. Unlike the default loop, it cannot
568	handle signal and child watchers, and attempts to do so will be greeted by
569	undefined behaviour (or a failed assertion if assertions are enabled).
570
571	Note that this function I<is> thread-safe, and the recommended way to use
572	libev with threads is indeed to create one loop per thread, and using the
573	default loop in the "main" or "initial" thread.
574
575	Example: Try to create a event loop that uses epoll and nothing else.	729	Example: Try to create a event loop that uses epoll and nothing else.
576		730
577	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	731	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
578	if (!epoller)	732	if (!epoller)
579	fatal ("no epoll found here, maybe it hides under your chair");	733	fatal ("no epoll found here, maybe it hides under your chair");
580		734
		735	Example: Use whatever libev has to offer, but make sure that kqueue is
		736	used if available.
		737
		738	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_KQUEUE);
		739
		740	Example: Similarly, on linux, you mgiht want to take advantage of the
		741	linux aio backend if possible, but fall back to something else if that
		742	isn't available.
		743
		744	struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_LINUXAIO);
		745
581	=item ev_default_destroy ()	746	=item ev_loop_destroy (loop)
582		747
583	Destroys the default loop again (frees all memory and kernel state	748	Destroys an event loop object (frees all memory and kernel state
584	etc.). None of the active event watchers will be stopped in the normal	749	etc.). None of the active event watchers will be stopped in the normal
585	sense, so e.g. C<ev_is_active> might still return true. It is your	750	sense, so e.g. C<ev_is_active> might still return true. It is your
586	responsibility to either stop all watchers cleanly yourself I<before>	751	responsibility to either stop all watchers cleanly yourself I<before>
587	calling this function, or cope with the fact afterwards (which is usually	752	calling this function, or cope with the fact afterwards (which is usually
588	the easiest thing, you can just ignore the watchers and/or C<free ()> them	753	the easiest thing, you can just ignore the watchers and/or C<free ()> them
…		…
590		755
591	Note that certain global state, such as signal state (and installed signal	756	Note that certain global state, such as signal state (and installed signal
592	handlers), will not be freed by this function, and related watchers (such	757	handlers), will not be freed by this function, and related watchers (such
593	as signal and child watchers) would need to be stopped manually.	758	as signal and child watchers) would need to be stopped manually.
594		759
595	In general it is not advisable to call this function except in the	760	This function is normally used on loop objects allocated by
596	rare occasion where you really need to free e.g. the signal handling	761	C<ev_loop_new>, but it can also be used on the default loop returned by
		762	C<ev_default_loop>, in which case it is not thread-safe.
		763
		764	Note that it is not advisable to call this function on the default loop
		765	except in the rare occasion where you really need to free its resources.
597	pipe fds. If you need dynamically allocated loops it is better to use	766	If you need dynamically allocated loops it is better to use C<ev_loop_new>
598	C<ev_loop_new> and C<ev_loop_destroy>.	767	and C<ev_loop_destroy>.
599		768
600	=item ev_loop_destroy (loop)	769	=item ev_loop_fork (loop)
601		770
602	Like C<ev_default_destroy>, but destroys an event loop created by an
603	earlier call to C<ev_loop_new>.
604
605	=item ev_default_fork ()
606
607	This function sets a flag that causes subsequent C<ev_loop> iterations	771	This function sets a flag that causes subsequent C<ev_run> iterations
608	to reinitialise the kernel state for backends that have one. Despite the	772	to reinitialise the kernel state for backends that have one. Despite
609	name, you can call it anytime, but it makes most sense after forking, in	773	the name, you can call it anytime you are allowed to start or stop
610	the child process (or both child and parent, but that again makes little	774	watchers (except inside an C<ev_prepare> callback), but it makes most
611	sense). You I<must> call it in the child before using any of the libev	775	sense after forking, in the child process. You I<must> call it (or use
612	functions, and it will only take effect at the next C<ev_loop> iteration.	776	C<EVFLAG_FORKCHECK>) in the child before resuming or calling C<ev_run>.
		777
		778	In addition, if you want to reuse a loop (via this function or
		779	C<EVFLAG_FORKCHECK>), you I<also> have to ignore C<SIGPIPE>.
		780
		781	Again, you I<have> to call it on I<any> loop that you want to re-use after
		782	a fork, I<even if you do not plan to use the loop in the parent>. This is
		783	because some kernel interfaces *cough* I<kqueue> *cough* do funny things
		784	during fork.
613		785
614	On the other hand, you only need to call this function in the child	786	On the other hand, you only need to call this function in the child
615	process if and only if you want to use the event library in the child. If	787	process if and only if you want to use the event loop in the child. If
616	you just fork+exec, you don't have to call it at all.	788	you just fork+exec or create a new loop in the child, you don't have to
		789	call it at all (in fact, C<epoll> is so badly broken that it makes a
		790	difference, but libev will usually detect this case on its own and do a
		791	costly reset of the backend).
617		792
618	The function itself is quite fast and it's usually not a problem to call	793	The function itself is quite fast and it's usually not a problem to call
619	it just in case after a fork. To make this easy, the function will fit in	794	it just in case after a fork.
620	quite nicely into a call to C<pthread_atfork>:
621		795
		796	Example: Automate calling C<ev_loop_fork> on the default loop when
		797	using pthreads.
		798
		799	static void
		800	post_fork_child (void)
		801	{
		802	ev_loop_fork (EV_DEFAULT);
		803	}
		804
		805	...
622	pthread_atfork (0, 0, ev_default_fork);	806	pthread_atfork (0, 0, post_fork_child);
623
624	=item ev_loop_fork (loop)
625
626	Like C<ev_default_fork>, but acts on an event loop created by
627	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
628	after fork that you want to re-use in the child, and how you do this is
629	entirely your own problem.
630		807
631	=item int ev_is_default_loop (loop)	808	=item int ev_is_default_loop (loop)
632		809
633	Returns true when the given loop is, in fact, the default loop, and false	810	Returns true when the given loop is, in fact, the default loop, and false
634	otherwise.	811	otherwise.
635		812
636	=item unsigned int ev_loop_count (loop)	813	=item unsigned int ev_iteration (loop)
637		814
638	Returns the count of loop iterations for the loop, which is identical to	815	Returns the current iteration count for the event loop, which is identical
639	the number of times libev did poll for new events. It starts at C<0> and	816	to the number of times libev did poll for new events. It starts at C<0>
640	happily wraps around with enough iterations.	817	and happily wraps around with enough iterations.
641		818
642	This value can sometimes be useful as a generation counter of sorts (it	819	This value can sometimes be useful as a generation counter of sorts (it
643	"ticks" the number of loop iterations), as it roughly corresponds with	820	"ticks" the number of loop iterations), as it roughly corresponds with
644	C<ev_prepare> and C<ev_check> calls.	821	C<ev_prepare> and C<ev_check> calls - and is incremented between the
		822	prepare and check phases.
645		823
646	=item unsigned int ev_loop_depth (loop)	824	=item unsigned int ev_depth (loop)
647		825
648	Returns the number of times C<ev_loop> was entered minus the number of	826	Returns the number of times C<ev_run> was entered minus the number of
649	times C<ev_loop> was exited, in other words, the recursion depth.	827	times C<ev_run> was exited normally, in other words, the recursion depth.
650		828
651	Outside C<ev_loop>, this number is zero. In a callback, this number is	829	Outside C<ev_run>, this number is zero. In a callback, this number is
652	C<1>, unless C<ev_loop> was invoked recursively (or from another thread),	830	C<1>, unless C<ev_run> was invoked recursively (or from another thread),
653	in which case it is higher.	831	in which case it is higher.
654		832
655	Leaving C<ev_loop> abnormally (setjmp/longjmp, cancelling the thread	833	Leaving C<ev_run> abnormally (setjmp/longjmp, cancelling the thread,
656	etc.), doesn't count as exit.	834	throwing an exception etc.), doesn't count as "exit" - consider this
		835	as a hint to avoid such ungentleman-like behaviour unless it's really
		836	convenient, in which case it is fully supported.
657		837
658	=item unsigned int ev_backend (loop)	838	=item unsigned int ev_backend (loop)
659		839
660	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	840	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
661	use.	841	use.
…		…
670		850
671	=item ev_now_update (loop)	851	=item ev_now_update (loop)
672		852
673	Establishes the current time by querying the kernel, updating the time	853	Establishes the current time by querying the kernel, updating the time
674	returned by C<ev_now ()> in the progress. This is a costly operation and	854	returned by C<ev_now ()> in the progress. This is a costly operation and
675	is usually done automatically within C<ev_loop ()>.	855	is usually done automatically within C<ev_run ()>.
676		856
677	This function is rarely useful, but when some event callback runs for a	857	This function is rarely useful, but when some event callback runs for a
678	very long time without entering the event loop, updating libev's idea of	858	very long time without entering the event loop, updating libev's idea of
679	the current time is a good idea.	859	the current time is a good idea.
680		860
681	See also L<The special problem of time updates> in the C<ev_timer> section.	861	See also L</The special problem of time updates> in the C<ev_timer> section.
682		862
683	=item ev_suspend (loop)	863	=item ev_suspend (loop)
684		864
685	=item ev_resume (loop)	865	=item ev_resume (loop)
686		866
687	These two functions suspend and resume a loop, for use when the loop is	867	These two functions suspend and resume an event loop, for use when the
688	not used for a while and timeouts should not be processed.	868	loop is not used for a while and timeouts should not be processed.
689		869
690	A typical use case would be an interactive program such as a game: When	870	A typical use case would be an interactive program such as a game: When
691	the user presses C<^Z> to suspend the game and resumes it an hour later it	871	the user presses C<^Z> to suspend the game and resumes it an hour later it
692	would be best to handle timeouts as if no time had actually passed while	872	would be best to handle timeouts as if no time had actually passed while
693	the program was suspended. This can be achieved by calling C<ev_suspend>	873	the program was suspended. This can be achieved by calling C<ev_suspend>
…		…
695	C<ev_resume> directly afterwards to resume timer processing.	875	C<ev_resume> directly afterwards to resume timer processing.
696		876
697	Effectively, all C<ev_timer> watchers will be delayed by the time spend	877	Effectively, all C<ev_timer> watchers will be delayed by the time spend
698	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers	878	between C<ev_suspend> and C<ev_resume>, and all C<ev_periodic> watchers
699	will be rescheduled (that is, they will lose any events that would have	879	will be rescheduled (that is, they will lose any events that would have
700	occured while suspended).	880	occurred while suspended).
701		881
702	After calling C<ev_suspend> you B<must not> call I<any> function on the	882	After calling C<ev_suspend> you B<must not> call I<any> function on the
703	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>	883	given loop other than C<ev_resume>, and you B<must not> call C<ev_resume>
704	without a previous call to C<ev_suspend>.	884	without a previous call to C<ev_suspend>.
705		885
706	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the	886	Calling C<ev_suspend>/C<ev_resume> has the side effect of updating the
707	event loop time (see C<ev_now_update>).	887	event loop time (see C<ev_now_update>).
708		888
709	=item ev_loop (loop, int flags)	889	=item bool ev_run (loop, int flags)
710		890
711	Finally, this is it, the event handler. This function usually is called	891	Finally, this is it, the event handler. This function usually is called
712	after you have initialised all your watchers and you want to start	892	after you have initialised all your watchers and you want to start
713	handling events.	893	handling events. It will ask the operating system for any new events, call
		894	the watcher callbacks, and then repeat the whole process indefinitely: This
		895	is why event loops are called I<loops>.
714		896
715	If the flags argument is specified as C<0>, it will not return until	897	If the flags argument is specified as C<0>, it will keep handling events
716	either no event watchers are active anymore or C<ev_unloop> was called.	898	until either no event watchers are active anymore or C<ev_break> was
		899	called.
717		900
		901	The return value is false if there are no more active watchers (which
		902	usually means "all jobs done" or "deadlock"), and true in all other cases
		903	(which usually means " you should call C<ev_run> again").
		904
718	Please note that an explicit C<ev_unloop> is usually better than	905	Please note that an explicit C<ev_break> is usually better than
719	relying on all watchers to be stopped when deciding when a program has	906	relying on all watchers to be stopped when deciding when a program has
720	finished (especially in interactive programs), but having a program	907	finished (especially in interactive programs), but having a program
721	that automatically loops as long as it has to and no longer by virtue	908	that automatically loops as long as it has to and no longer by virtue
722	of relying on its watchers stopping correctly, that is truly a thing of	909	of relying on its watchers stopping correctly, that is truly a thing of
723	beauty.	910	beauty.
724		911
		912	This function is I<mostly> exception-safe - you can break out of a
		913	C<ev_run> call by calling C<longjmp> in a callback, throwing a C++
		914	exception and so on. This does not decrement the C<ev_depth> value, nor
		915	will it clear any outstanding C<EVBREAK_ONE> breaks.
		916
725	A flags value of C<EVLOOP_NONBLOCK> will look for new events, will handle	917	A flags value of C<EVRUN_NOWAIT> will look for new events, will handle
726	those events and any already outstanding ones, but will not block your	918	those events and any already outstanding ones, but will not wait and
727	process in case there are no events and will return after one iteration of	919	block your process in case there are no events and will return after one
728	the loop.	920	iteration of the loop. This is sometimes useful to poll and handle new
		921	events while doing lengthy calculations, to keep the program responsive.
729		922
730	A flags value of C<EVLOOP_ONESHOT> will look for new events (waiting if	923	A flags value of C<EVRUN_ONCE> will look for new events (waiting if
731	necessary) and will handle those and any already outstanding ones. It	924	necessary) and will handle those and any already outstanding ones. It
732	will block your process until at least one new event arrives (which could	925	will block your process until at least one new event arrives (which could
733	be an event internal to libev itself, so there is no guarantee that a	926	be an event internal to libev itself, so there is no guarantee that a
734	user-registered callback will be called), and will return after one	927	user-registered callback will be called), and will return after one
735	iteration of the loop.	928	iteration of the loop.
736		929
737	This is useful if you are waiting for some external event in conjunction	930	This is useful if you are waiting for some external event in conjunction
738	with something not expressible using other libev watchers (i.e. "roll your	931	with something not expressible using other libev watchers (i.e. "roll your
739	own C<ev_loop>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is	932	own C<ev_run>"). However, a pair of C<ev_prepare>/C<ev_check> watchers is
740	usually a better approach for this kind of thing.	933	usually a better approach for this kind of thing.
741		934
742	Here are the gory details of what C<ev_loop> does:	935	Here are the gory details of what C<ev_run> does (this is for your
		936	understanding, not a guarantee that things will work exactly like this in
		937	future versions):
743		938
		939	- Increment loop depth.
		940	- Reset the ev_break status.
744	- Before the first iteration, call any pending watchers.	941	- Before the first iteration, call any pending watchers.
		942	LOOP:
745	* If EVFLAG_FORKCHECK was used, check for a fork.	943	- If EVFLAG_FORKCHECK was used, check for a fork.
746	- If a fork was detected (by any means), queue and call all fork watchers.	944	- If a fork was detected (by any means), queue and call all fork watchers.
747	- Queue and call all prepare watchers.	945	- Queue and call all prepare watchers.
		946	- If ev_break was called, goto FINISH.
748	- If we have been forked, detach and recreate the kernel state	947	- If we have been forked, detach and recreate the kernel state
749	as to not disturb the other process.	948	as to not disturb the other process.
750	- Update the kernel state with all outstanding changes.	949	- Update the kernel state with all outstanding changes.
751	- Update the "event loop time" (ev_now ()).	950	- Update the "event loop time" (ev_now ()).
752	- Calculate for how long to sleep or block, if at all	951	- Calculate for how long to sleep or block, if at all
753	(active idle watchers, EVLOOP_NONBLOCK or not having	952	(active idle watchers, EVRUN_NOWAIT or not having
754	any active watchers at all will result in not sleeping).	953	any active watchers at all will result in not sleeping).
755	- Sleep if the I/O and timer collect interval say so.	954	- Sleep if the I/O and timer collect interval say so.
		955	- Increment loop iteration counter.
756	- Block the process, waiting for any events.	956	- Block the process, waiting for any events.
757	- Queue all outstanding I/O (fd) events.	957	- Queue all outstanding I/O (fd) events.
758	- Update the "event loop time" (ev_now ()), and do time jump adjustments.	958	- Update the "event loop time" (ev_now ()), and do time jump adjustments.
759	- Queue all expired timers.	959	- Queue all expired timers.
760	- Queue all expired periodics.	960	- Queue all expired periodics.
761	- Unless any events are pending now, queue all idle watchers.	961	- Queue all idle watchers with priority higher than that of pending events.
762	- Queue all check watchers.	962	- Queue all check watchers.
763	- Call all queued watchers in reverse order (i.e. check watchers first).	963	- Call all queued watchers in reverse order (i.e. check watchers first).
764	Signals and child watchers are implemented as I/O watchers, and will	964	Signals and child watchers are implemented as I/O watchers, and will
765	be handled here by queueing them when their watcher gets executed.	965	be handled here by queueing them when their watcher gets executed.
766	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	966	- If ev_break has been called, or EVRUN_ONCE or EVRUN_NOWAIT
767	were used, or there are no active watchers, return, otherwise	967	were used, or there are no active watchers, goto FINISH, otherwise
768	continue with step *.	968	continue with step LOOP.
		969	FINISH:
		970	- Reset the ev_break status iff it was EVBREAK_ONE.
		971	- Decrement the loop depth.
		972	- Return.
769		973
770	Example: Queue some jobs and then loop until no events are outstanding	974	Example: Queue some jobs and then loop until no events are outstanding
771	anymore.	975	anymore.
772		976
773	... queue jobs here, make sure they register event watchers as long	977	... queue jobs here, make sure they register event watchers as long
774	... as they still have work to do (even an idle watcher will do..)	978	... as they still have work to do (even an idle watcher will do..)
775	ev_loop (my_loop, 0);	979	ev_run (my_loop, 0);
776	... jobs done or somebody called unloop. yeah!	980	... jobs done or somebody called break. yeah!
777		981
778	=item ev_unloop (loop, how)	982	=item ev_break (loop, how)
779		983
780	Can be used to make a call to C<ev_loop> return early (but only after it	984	Can be used to make a call to C<ev_run> return early (but only after it
781	has processed all outstanding events). The C<how> argument must be either	985	has processed all outstanding events). The C<how> argument must be either
782	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	986	C<EVBREAK_ONE>, which will make the innermost C<ev_run> call return, or
783	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	987	C<EVBREAK_ALL>, which will make all nested C<ev_run> calls return.
784		988
785	This "unloop state" will be cleared when entering C<ev_loop> again.	989	This "break state" will be cleared on the next call to C<ev_run>.
786		990
787	It is safe to call C<ev_unloop> from otuside any C<ev_loop> calls.	991	It is safe to call C<ev_break> from outside any C<ev_run> calls, too, in
		992	which case it will have no effect.
788		993
789	=item ev_ref (loop)	994	=item ev_ref (loop)
790		995
791	=item ev_unref (loop)	996	=item ev_unref (loop)
792		997
793	Ref/unref can be used to add or remove a reference count on the event	998	Ref/unref can be used to add or remove a reference count on the event
794	loop: Every watcher keeps one reference, and as long as the reference	999	loop: Every watcher keeps one reference, and as long as the reference
795	count is nonzero, C<ev_loop> will not return on its own.	1000	count is nonzero, C<ev_run> will not return on its own.
796		1001
797	If you have a watcher you never unregister that should not keep C<ev_loop>	1002	This is useful when you have a watcher that you never intend to
798	from returning, call ev_unref() after starting, and ev_ref() before	1003	unregister, but that nevertheless should not keep C<ev_run> from
		1004	returning. In such a case, call C<ev_unref> after starting, and C<ev_ref>
799	stopping it.	1005	before stopping it.
800		1006
801	As an example, libev itself uses this for its internal signal pipe: It	1007	As an example, libev itself uses this for its internal signal pipe: It
802	is not visible to the libev user and should not keep C<ev_loop> from	1008	is not visible to the libev user and should not keep C<ev_run> from
803	exiting if no event watchers registered by it are active. It is also an	1009	exiting if no event watchers registered by it are active. It is also an
804	excellent way to do this for generic recurring timers or from within	1010	excellent way to do this for generic recurring timers or from within
805	third-party libraries. Just remember to I<unref after start> and I<ref	1011	third-party libraries. Just remember to I<unref after start> and I<ref
806	before stop> (but only if the watcher wasn't active before, or was active	1012	before stop> (but only if the watcher wasn't active before, or was active
807	before, respectively. Note also that libev might stop watchers itself	1013	before, respectively. Note also that libev might stop watchers itself
808	(e.g. non-repeating timers) in which case you have to C<ev_ref>	1014	(e.g. non-repeating timers) in which case you have to C<ev_ref>
809	in the callback).	1015	in the callback).
810		1016
811	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	1017	Example: Create a signal watcher, but keep it from keeping C<ev_run>
812	running when nothing else is active.	1018	running when nothing else is active.
813		1019
814	ev_signal exitsig;	1020	ev_signal exitsig;
815	ev_signal_init (&exitsig, sig_cb, SIGINT);	1021	ev_signal_init (&exitsig, sig_cb, SIGINT);
816	ev_signal_start (loop, &exitsig);	1022	ev_signal_start (loop, &exitsig);
817	evf_unref (loop);	1023	ev_unref (loop);
818		1024
819	Example: For some weird reason, unregister the above signal handler again.	1025	Example: For some weird reason, unregister the above signal handler again.
820		1026
821	ev_ref (loop);	1027	ev_ref (loop);
822	ev_signal_stop (loop, &exitsig);	1028	ev_signal_stop (loop, &exitsig);
…		…
842	overhead for the actual polling but can deliver many events at once.	1048	overhead for the actual polling but can deliver many events at once.
843		1049
844	By setting a higher I<io collect interval> you allow libev to spend more	1050	By setting a higher I<io collect interval> you allow libev to spend more
845	time collecting I/O events, so you can handle more events per iteration,	1051	time collecting I/O events, so you can handle more events per iteration,
846	at the cost of increasing latency. Timeouts (both C<ev_periodic> and	1052	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
847	C<ev_timer>) will be not affected. Setting this to a non-null value will	1053	C<ev_timer>) will not be affected. Setting this to a non-null value will
848	introduce an additional C<ev_sleep ()> call into most loop iterations. The	1054	introduce an additional C<ev_sleep ()> call into most loop iterations. The
849	sleep time ensures that libev will not poll for I/O events more often then	1055	sleep time ensures that libev will not poll for I/O events more often then
850	once per this interval, on average.	1056	once per this interval, on average (as long as the host time resolution is
		1057	good enough).
851		1058
852	Likewise, by setting a higher I<timeout collect interval> you allow libev	1059	Likewise, by setting a higher I<timeout collect interval> you allow libev
853	to spend more time collecting timeouts, at the expense of increased	1060	to spend more time collecting timeouts, at the expense of increased
854	latency/jitter/inexactness (the watcher callback will be called	1061	latency/jitter/inexactness (the watcher callback will be called
855	later). C<ev_io> watchers will not be affected. Setting this to a non-null	1062	later). C<ev_io> watchers will not be affected. Setting this to a non-null
…		…
861	usually doesn't make much sense to set it to a lower value than C<0.01>,	1068	usually doesn't make much sense to set it to a lower value than C<0.01>,
862	as this approaches the timing granularity of most systems. Note that if	1069	as this approaches the timing granularity of most systems. Note that if
863	you do transactions with the outside world and you can't increase the	1070	you do transactions with the outside world and you can't increase the
864	parallelity, then this setting will limit your transaction rate (if you	1071	parallelity, then this setting will limit your transaction rate (if you
865	need to poll once per transaction and the I/O collect interval is 0.01,	1072	need to poll once per transaction and the I/O collect interval is 0.01,
866	then you can't do more than 100 transations per second).	1073	then you can't do more than 100 transactions per second).
867		1074
868	Setting the I<timeout collect interval> can improve the opportunity for	1075	Setting the I<timeout collect interval> can improve the opportunity for
869	saving power, as the program will "bundle" timer callback invocations that	1076	saving power, as the program will "bundle" timer callback invocations that
870	are "near" in time together, by delaying some, thus reducing the number of	1077	are "near" in time together, by delaying some, thus reducing the number of
871	times the process sleeps and wakes up again. Another useful technique to	1078	times the process sleeps and wakes up again. Another useful technique to
…		…
879	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);	1086	ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);
880		1087
881	=item ev_invoke_pending (loop)	1088	=item ev_invoke_pending (loop)
882		1089
883	This call will simply invoke all pending watchers while resetting their	1090	This call will simply invoke all pending watchers while resetting their
884	pending state. Normally, C<ev_loop> does this automatically when required,	1091	pending state. Normally, C<ev_run> does this automatically when required,
885	but when overriding the invoke callback this call comes handy.	1092	but when overriding the invoke callback this call comes handy. This
		1093	function can be invoked from a watcher - this can be useful for example
		1094	when you want to do some lengthy calculation and want to pass further
		1095	event handling to another thread (you still have to make sure only one
		1096	thread executes within C<ev_invoke_pending> or C<ev_run> of course).
886		1097
887	=item int ev_pending_count (loop)	1098	=item int ev_pending_count (loop)
888		1099
889	Returns the number of pending watchers - zero indicates that no watchers	1100	Returns the number of pending watchers - zero indicates that no watchers
890	are pending.	1101	are pending.
891		1102
892	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))	1103	=item ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))
893		1104
894	This overrides the invoke pending functionality of the loop: Instead of	1105	This overrides the invoke pending functionality of the loop: Instead of
895	invoking all pending watchers when there are any, C<ev_loop> will call	1106	invoking all pending watchers when there are any, C<ev_run> will call
896	this callback instead. This is useful, for example, when you want to	1107	this callback instead. This is useful, for example, when you want to
897	invoke the actual watchers inside another context (another thread etc.).	1108	invoke the actual watchers inside another context (another thread etc.).
898		1109
899	If you want to reset the callback, use C<ev_invoke_pending> as new	1110	If you want to reset the callback, use C<ev_invoke_pending> as new
900	callback.	1111	callback.
901		1112
902	=item ev_set_loop_release_cb (loop, void (*release)(EV_P), void (*acquire)(EV_P))	1113	=item ev_set_loop_release_cb (loop, void (*release)(EV_P) throw (), void (*acquire)(EV_P) throw ())
903		1114
904	Sometimes you want to share the same loop between multiple threads. This	1115	Sometimes you want to share the same loop between multiple threads. This
905	can be done relatively simply by putting mutex_lock/unlock calls around	1116	can be done relatively simply by putting mutex_lock/unlock calls around
906	each call to a libev function.	1117	each call to a libev function.
907		1118
908	However, C<ev_loop> can run an indefinite time, so it is not feasible to	1119	However, C<ev_run> can run an indefinite time, so it is not feasible
909	wait for it to return. One way around this is to wake up the loop via	1120	to wait for it to return. One way around this is to wake up the event
910	C<ev_unloop> and C<av_async_send>, another way is to set these I<release>	1121	loop via C<ev_break> and C<ev_async_send>, another way is to set these
911	and I<acquire> callbacks on the loop.	1122	I<release> and I<acquire> callbacks on the loop.
912		1123
913	When set, then C<release> will be called just before the thread is	1124	When set, then C<release> will be called just before the thread is
914	suspended waiting for new events, and C<acquire> is called just	1125	suspended waiting for new events, and C<acquire> is called just
915	afterwards.	1126	afterwards.
916		1127
…		…
919		1130
920	While event loop modifications are allowed between invocations of	1131	While event loop modifications are allowed between invocations of
921	C<release> and C<acquire> (that's their only purpose after all), no	1132	C<release> and C<acquire> (that's their only purpose after all), no
922	modifications done will affect the event loop, i.e. adding watchers will	1133	modifications done will affect the event loop, i.e. adding watchers will
923	have no effect on the set of file descriptors being watched, or the time	1134	have no effect on the set of file descriptors being watched, or the time
924	waited. USe an C<ev_async> watcher to wake up C<ev_loop> when you want it	1135	waited. Use an C<ev_async> watcher to wake up C<ev_run> when you want it
925	to take note of any changes you made.	1136	to take note of any changes you made.
926		1137
927	In theory, threads executing C<ev_loop> will be async-cancel safe between	1138	In theory, threads executing C<ev_run> will be async-cancel safe between
928	invocations of C<release> and C<acquire>.	1139	invocations of C<release> and C<acquire>.
929		1140
930	See also the locking example in the C<THREADS> section later in this	1141	See also the locking example in the C<THREADS> section later in this
931	document.	1142	document.
932		1143
933	=item ev_set_userdata (loop, void *data)	1144	=item ev_set_userdata (loop, void *data)
934		1145
935	=item ev_userdata (loop)	1146	=item void *ev_userdata (loop)
936		1147
937	Set and retrieve a single C<void *> associated with a loop. When	1148	Set and retrieve a single C<void *> associated with a loop. When
938	C<ev_set_userdata> has never been called, then C<ev_userdata> returns	1149	C<ev_set_userdata> has never been called, then C<ev_userdata> returns
939	C<0.>	1150	C<0>.
940		1151
941	These two functions can be used to associate arbitrary data with a loop,	1152	These two functions can be used to associate arbitrary data with a loop,
942	and are intended solely for the C<invoke_pending_cb>, C<release> and	1153	and are intended solely for the C<invoke_pending_cb>, C<release> and
943	C<acquire> callbacks described above, but of course can be (ab-)used for	1154	C<acquire> callbacks described above, but of course can be (ab-)used for
944	any other purpose as well.	1155	any other purpose as well.
945		1156
946	=item ev_loop_verify (loop)	1157	=item ev_verify (loop)
947		1158
948	This function only does something when C<EV_VERIFY> support has been	1159	This function only does something when C<EV_VERIFY> support has been
949	compiled in, which is the default for non-minimal builds. It tries to go	1160	compiled in, which is the default for non-minimal builds. It tries to go
950	through all internal structures and checks them for validity. If anything	1161	through all internal structures and checks them for validity. If anything
951	is found to be inconsistent, it will print an error message to standard	1162	is found to be inconsistent, it will print an error message to standard
…		…
962		1173
963	In the following description, uppercase C<TYPE> in names stands for the	1174	In the following description, uppercase C<TYPE> in names stands for the
964	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer	1175	watcher type, e.g. C<ev_TYPE_start> can mean C<ev_timer_start> for timer
965	watchers and C<ev_io_start> for I/O watchers.	1176	watchers and C<ev_io_start> for I/O watchers.
966		1177
967	A watcher is a structure that you create and register to record your	1178	A watcher is an opaque structure that you allocate and register to record
968	interest in some event. For instance, if you want to wait for STDIN to	1179	your interest in some event. To make a concrete example, imagine you want
969	become readable, you would create an C<ev_io> watcher for that:	1180	to wait for STDIN to become readable, you would create an C<ev_io> watcher
		1181	for that:
970		1182
971	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)	1183	static void my_cb (struct ev_loop *loop, ev_io *w, int revents)
972	{	1184	{
973	ev_io_stop (w);	1185	ev_io_stop (w);
974	ev_unloop (loop, EVUNLOOP_ALL);	1186	ev_break (loop, EVBREAK_ALL);
975	}	1187	}
976		1188
977	struct ev_loop *loop = ev_default_loop (0);	1189	struct ev_loop *loop = ev_default_loop (0);
978		1190
979	ev_io stdin_watcher;	1191	ev_io stdin_watcher;
980		1192
981	ev_init (&stdin_watcher, my_cb);	1193	ev_init (&stdin_watcher, my_cb);
982	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);	1194	ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
983	ev_io_start (loop, &stdin_watcher);	1195	ev_io_start (loop, &stdin_watcher);
984		1196
985	ev_loop (loop, 0);	1197	ev_run (loop, 0);
986		1198
987	As you can see, you are responsible for allocating the memory for your	1199	As you can see, you are responsible for allocating the memory for your
988	watcher structures (and it is I<usually> a bad idea to do this on the	1200	watcher structures (and it is I<usually> a bad idea to do this on the
989	stack).	1201	stack).
990		1202
991	Each watcher has an associated watcher structure (called C<struct ev_TYPE>	1203	Each watcher has an associated watcher structure (called C<struct ev_TYPE>
992	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).	1204	or simply C<ev_TYPE>, as typedefs are provided for all watcher structs).
993		1205
994	Each watcher structure must be initialised by a call to C<ev_init	1206	Each watcher structure must be initialised by a call to C<ev_init (watcher
995	(watcher *, callback)>, which expects a callback to be provided. This	1207	*, callback)>, which expects a callback to be provided. This callback is
996	callback gets invoked each time the event occurs (or, in the case of I/O	1208	invoked each time the event occurs (or, in the case of I/O watchers, each
997	watchers, each time the event loop detects that the file descriptor given	1209	time the event loop detects that the file descriptor given is readable
998	is readable and/or writable).	1210	and/or writable).
999		1211
1000	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>	1212	Each watcher type further has its own C<< ev_TYPE_set (watcher *, ...) >>
1001	macro to configure it, with arguments specific to the watcher type. There	1213	macro to configure it, with arguments specific to the watcher type. There
1002	is also a macro to combine initialisation and setting in one call: C<<	1214	is also a macro to combine initialisation and setting in one call: C<<
1003	ev_TYPE_init (watcher *, callback, ...) >>.	1215	ev_TYPE_init (watcher *, callback, ...) >>.
…		…
1026	=item C<EV_WRITE>	1238	=item C<EV_WRITE>
1027		1239
1028	The file descriptor in the C<ev_io> watcher has become readable and/or	1240	The file descriptor in the C<ev_io> watcher has become readable and/or
1029	writable.	1241	writable.
1030		1242
1031	=item C<EV_TIMEOUT>	1243	=item C<EV_TIMER>
1032		1244
1033	The C<ev_timer> watcher has timed out.	1245	The C<ev_timer> watcher has timed out.
1034		1246
1035	=item C<EV_PERIODIC>	1247	=item C<EV_PERIODIC>
1036		1248
…		…
1054		1266
1055	=item C<EV_PREPARE>	1267	=item C<EV_PREPARE>
1056		1268
1057	=item C<EV_CHECK>	1269	=item C<EV_CHECK>
1058		1270
1059	All C<ev_prepare> watchers are invoked just I<before> C<ev_loop> starts	1271	All C<ev_prepare> watchers are invoked just I<before> C<ev_run> starts to
1060	to gather new events, and all C<ev_check> watchers are invoked just after	1272	gather new events, and all C<ev_check> watchers are queued (not invoked)
1061	C<ev_loop> has gathered them, but before it invokes any callbacks for any	1273	just after C<ev_run> has gathered them, but before it queues any callbacks
		1274	for any received events. That means C<ev_prepare> watchers are the last
		1275	watchers invoked before the event loop sleeps or polls for new events, and
		1276	C<ev_check> watchers will be invoked before any other watchers of the same
		1277	or lower priority within an event loop iteration.
		1278
1062	received events. Callbacks of both watcher types can start and stop as	1279	Callbacks of both watcher types can start and stop as many watchers as
1063	many watchers as they want, and all of them will be taken into account	1280	they want, and all of them will be taken into account (for example, a
1064	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	1281	C<ev_prepare> watcher might start an idle watcher to keep C<ev_run> from
1065	C<ev_loop> from blocking).	1282	blocking).
1066		1283
1067	=item C<EV_EMBED>	1284	=item C<EV_EMBED>
1068		1285
1069	The embedded event loop specified in the C<ev_embed> watcher needs attention.	1286	The embedded event loop specified in the C<ev_embed> watcher needs attention.
1070		1287
1071	=item C<EV_FORK>	1288	=item C<EV_FORK>
1072		1289
1073	The event loop has been resumed in the child process after fork (see	1290	The event loop has been resumed in the child process after fork (see
1074	C<ev_fork>).	1291	C<ev_fork>).
		1292
		1293	=item C<EV_CLEANUP>
		1294
		1295	The event loop is about to be destroyed (see C<ev_cleanup>).
1075		1296
1076	=item C<EV_ASYNC>	1297	=item C<EV_ASYNC>
1077		1298
1078	The given async watcher has been asynchronously notified (see C<ev_async>).	1299	The given async watcher has been asynchronously notified (see C<ev_async>).
1079		1300
…		…
1126		1347
1127	ev_io w;	1348	ev_io w;
1128	ev_init (&w, my_cb);	1349	ev_init (&w, my_cb);
1129	ev_io_set (&w, STDIN_FILENO, EV_READ);	1350	ev_io_set (&w, STDIN_FILENO, EV_READ);
1130		1351
1131	=item C<ev_TYPE_set> (ev_TYPE *, [args])	1352	=item C<ev_TYPE_set> (ev_TYPE *watcher, [args])
1132		1353
1133	This macro initialises the type-specific parts of a watcher. You need to	1354	This macro initialises the type-specific parts of a watcher. You need to
1134	call C<ev_init> at least once before you call this macro, but you can	1355	call C<ev_init> at least once before you call this macro, but you can
1135	call C<ev_TYPE_set> any number of times. You must not, however, call this	1356	call C<ev_TYPE_set> any number of times. You must not, however, call this
1136	macro on a watcher that is active (it can be pending, however, which is a	1357	macro on a watcher that is active (it can be pending, however, which is a
…		…
1149		1370
1150	Example: Initialise and set an C<ev_io> watcher in one step.	1371	Example: Initialise and set an C<ev_io> watcher in one step.
1151		1372
1152	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);	1373	ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);
1153		1374
1154	=item C<ev_TYPE_start> (loop *, ev_TYPE *watcher)	1375	=item C<ev_TYPE_start> (loop, ev_TYPE *watcher)
1155		1376
1156	Starts (activates) the given watcher. Only active watchers will receive	1377	Starts (activates) the given watcher. Only active watchers will receive
1157	events. If the watcher is already active nothing will happen.	1378	events. If the watcher is already active nothing will happen.
1158		1379
1159	Example: Start the C<ev_io> watcher that is being abused as example in this	1380	Example: Start the C<ev_io> watcher that is being abused as example in this
1160	whole section.	1381	whole section.
1161		1382
1162	ev_io_start (EV_DEFAULT_UC, &w);	1383	ev_io_start (EV_DEFAULT_UC, &w);
1163		1384
1164	=item C<ev_TYPE_stop> (loop *, ev_TYPE *watcher)	1385	=item C<ev_TYPE_stop> (loop, ev_TYPE *watcher)
1165		1386
1166	Stops the given watcher if active, and clears the pending status (whether	1387	Stops the given watcher if active, and clears the pending status (whether
1167	the watcher was active or not).	1388	the watcher was active or not).
1168		1389
1169	It is possible that stopped watchers are pending - for example,	1390	It is possible that stopped watchers are pending - for example,
…		…
1189		1410
1190	=item callback ev_cb (ev_TYPE *watcher)	1411	=item callback ev_cb (ev_TYPE *watcher)
1191		1412
1192	Returns the callback currently set on the watcher.	1413	Returns the callback currently set on the watcher.
1193		1414
1194	=item ev_cb_set (ev_TYPE *watcher, callback)	1415	=item ev_set_cb (ev_TYPE *watcher, callback)
1195		1416
1196	Change the callback. You can change the callback at virtually any time	1417	Change the callback. You can change the callback at virtually any time
1197	(modulo threads).	1418	(modulo threads).
1198		1419
1199	=item ev_set_priority (ev_TYPE *watcher, priority)	1420	=item ev_set_priority (ev_TYPE *watcher, int priority)
1200		1421
1201	=item int ev_priority (ev_TYPE *watcher)	1422	=item int ev_priority (ev_TYPE *watcher)
1202		1423
1203	Set and query the priority of the watcher. The priority is a small	1424	Set and query the priority of the watcher. The priority is a small
1204	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>	1425	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
…		…
1217	or might not have been clamped to the valid range.	1438	or might not have been clamped to the valid range.
1218		1439
1219	The default priority used by watchers when no priority has been set is	1440	The default priority used by watchers when no priority has been set is
1220	always C<0>, which is supposed to not be too high and not be too low :).	1441	always C<0>, which is supposed to not be too high and not be too low :).
1221		1442
1222	See L<WATCHER PRIORITY MODELS>, below, for a more thorough treatment of	1443	See L</WATCHER PRIORITY MODELS>, below, for a more thorough treatment of
1223	priorities.	1444	priorities.
1224		1445
1225	=item ev_invoke (loop, ev_TYPE *watcher, int revents)	1446	=item ev_invoke (loop, ev_TYPE *watcher, int revents)
1226		1447
1227	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither	1448	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
…		…
1236	watcher isn't pending it does nothing and returns C<0>.	1457	watcher isn't pending it does nothing and returns C<0>.
1237		1458
1238	Sometimes it can be useful to "poll" a watcher instead of waiting for its	1459	Sometimes it can be useful to "poll" a watcher instead of waiting for its
1239	callback to be invoked, which can be accomplished with this function.	1460	callback to be invoked, which can be accomplished with this function.
1240		1461
1241	=item ev_feed_event (struct ev_loop *, watcher *, int revents)	1462	=item ev_feed_event (loop, ev_TYPE *watcher, int revents)
1242		1463
1243	Feeds the given event set into the event loop, as if the specified event	1464	Feeds the given event set into the event loop, as if the specified event
1244	had happened for the specified watcher (which must be a pointer to an	1465	had happened for the specified watcher (which must be a pointer to an
1245	initialised but not necessarily started event watcher). Obviously you must	1466	initialised but not necessarily started event watcher). Obviously you must
1246	not free the watcher as long as it has pending events.	1467	not free the watcher as long as it has pending events.
…		…
1252	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related	1473	See also C<ev_feed_fd_event> and C<ev_feed_signal_event> for related
1253	functions that do not need a watcher.	1474	functions that do not need a watcher.
1254		1475
1255	=back	1476	=back
1256		1477
		1478	See also the L</ASSOCIATING CUSTOM DATA WITH A WATCHER> and L</BUILDING YOUR
		1479	OWN COMPOSITE WATCHERS> idioms.
1257		1480
1258	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	1481	=head2 WATCHER STATES
1259		1482
1260	Each watcher has, by default, a member C<void *data> that you can change	1483	There are various watcher states mentioned throughout this manual -
1261	and read at any time: libev will completely ignore it. This can be used	1484	active, pending and so on. In this section these states and the rules to
1262	to associate arbitrary data with your watcher. If you need more data and	1485	transition between them will be described in more detail - and while these
1263	don't want to allocate memory and store a pointer to it in that data	1486	rules might look complicated, they usually do "the right thing".
1264	member, you can also "subclass" the watcher type and provide your own
1265	data:
1266		1487
1267	struct my_io	1488	=over 4
1268	{
1269	ev_io io;
1270	int otherfd;
1271	void *somedata;
1272	struct whatever *mostinteresting;
1273	};
1274		1489
1275	...	1490	=item initialised
1276	struct my_io w;
1277	ev_io_init (&w.io, my_cb, fd, EV_READ);
1278		1491
1279	And since your callback will be called with a pointer to the watcher, you	1492	Before a watcher can be registered with the event loop it has to be
1280	can cast it back to your own type:	1493	initialised. This can be done with a call to C<ev_TYPE_init>, or calls to
		1494	C<ev_init> followed by the watcher-specific C<ev_TYPE_set> function.
1281		1495
1282	static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)	1496	In this state it is simply some block of memory that is suitable for
1283	{	1497	use in an event loop. It can be moved around, freed, reused etc. at
1284	struct my_io *w = (struct my_io *)w_;	1498	will - as long as you either keep the memory contents intact, or call
1285	...	1499	C<ev_TYPE_init> again.
1286	}
1287		1500
1288	More interesting and less C-conformant ways of casting your callback type	1501	=item started/running/active
1289	instead have been omitted.
1290		1502
1291	Another common scenario is to use some data structure with multiple	1503	Once a watcher has been started with a call to C<ev_TYPE_start> it becomes
1292	embedded watchers:	1504	property of the event loop, and is actively waiting for events. While in
		1505	this state it cannot be accessed (except in a few documented ways), moved,
		1506	freed or anything else - the only legal thing is to keep a pointer to it,
		1507	and call libev functions on it that are documented to work on active watchers.
1293		1508
1294	struct my_biggy	1509	=item pending
1295	{
1296	int some_data;
1297	ev_timer t1;
1298	ev_timer t2;
1299	}
1300		1510
1301	In this case getting the pointer to C<my_biggy> is a bit more	1511	If a watcher is active and libev determines that an event it is interested
1302	complicated: Either you store the address of your C<my_biggy> struct	1512	in has occurred (such as a timer expiring), it will become pending. It will
1303	in the C<data> member of the watcher (for woozies), or you need to use	1513	stay in this pending state until either it is stopped or its callback is
1304	some pointer arithmetic using C<offsetof> inside your watchers (for real	1514	about to be invoked, so it is not normally pending inside the watcher
1305	programmers):	1515	callback.
1306		1516
1307	#include <stddef.h>	1517	The watcher might or might not be active while it is pending (for example,
		1518	an expired non-repeating timer can be pending but no longer active). If it
		1519	is stopped, it can be freely accessed (e.g. by calling C<ev_TYPE_set>),
		1520	but it is still property of the event loop at this time, so cannot be
		1521	moved, freed or reused. And if it is active the rules described in the
		1522	previous item still apply.
1308		1523
1309	static void	1524	It is also possible to feed an event on a watcher that is not active (e.g.
1310	t1_cb (EV_P_ ev_timer *w, int revents)	1525	via C<ev_feed_event>), in which case it becomes pending without being
1311	{	1526	active.
1312	struct my_biggy big = (struct my_biggy *)
1313	(((char *)w) - offsetof (struct my_biggy, t1));
1314	}
1315		1527
1316	static void	1528	=item stopped
1317	t2_cb (EV_P_ ev_timer *w, int revents)	1529
1318	{	1530	A watcher can be stopped implicitly by libev (in which case it might still
1319	struct my_biggy big = (struct my_biggy *)	1531	be pending), or explicitly by calling its C<ev_TYPE_stop> function. The
1320	(((char *)w) - offsetof (struct my_biggy, t2));	1532	latter will clear any pending state the watcher might be in, regardless
1321	}	1533	of whether it was active or not, so stopping a watcher explicitly before
		1534	freeing it is often a good idea.
		1535
		1536	While stopped (and not pending) the watcher is essentially in the
		1537	initialised state, that is, it can be reused, moved, modified in any way
		1538	you wish (but when you trash the memory block, you need to C<ev_TYPE_init>
		1539	it again).
		1540
		1541	=back
1322		1542
1323	=head2 WATCHER PRIORITY MODELS	1543	=head2 WATCHER PRIORITY MODELS
1324		1544
1325	Many event loops support I<watcher priorities>, which are usually small	1545	Many event loops support I<watcher priorities>, which are usually small
1326	integers that influence the ordering of event callback invocation	1546	integers that influence the ordering of event callback invocation
1327	between watchers in some way, all else being equal.	1547	between watchers in some way, all else being equal.
1328		1548
1329	In libev, Watcher priorities can be set using C<ev_set_priority>. See its	1549	In libev, watcher priorities can be set using C<ev_set_priority>. See its
1330	description for the more technical details such as the actual priority	1550	description for the more technical details such as the actual priority
1331	range.	1551	range.
1332		1552
1333	There are two common ways how these these priorities are being interpreted	1553	There are two common ways how these these priorities are being interpreted
1334	by event loops:	1554	by event loops:
…		…
1369		1589
1370	For example, to emulate how many other event libraries handle priorities,	1590	For example, to emulate how many other event libraries handle priorities,
1371	you can associate an C<ev_idle> watcher to each such watcher, and in	1591	you can associate an C<ev_idle> watcher to each such watcher, and in
1372	the normal watcher callback, you just start the idle watcher. The real	1592	the normal watcher callback, you just start the idle watcher. The real
1373	processing is done in the idle watcher callback. This causes libev to	1593	processing is done in the idle watcher callback. This causes libev to
1374	continously poll and process kernel event data for the watcher, but when	1594	continuously poll and process kernel event data for the watcher, but when
1375	the lock-out case is known to be rare (which in turn is rare :), this is	1595	the lock-out case is known to be rare (which in turn is rare :), this is
1376	workable.	1596	workable.
1377		1597
1378	Usually, however, the lock-out model implemented that way will perform	1598	Usually, however, the lock-out model implemented that way will perform
1379	miserably under the type of load it was designed to handle. In that case,	1599	miserably under the type of load it was designed to handle. In that case,
…		…
1393	{	1613	{
1394	// stop the I/O watcher, we received the event, but	1614	// stop the I/O watcher, we received the event, but
1395	// are not yet ready to handle it.	1615	// are not yet ready to handle it.
1396	ev_io_stop (EV_A_ w);	1616	ev_io_stop (EV_A_ w);
1397		1617
1398	// start the idle watcher to ahndle the actual event.	1618	// start the idle watcher to handle the actual event.
1399	// it will not be executed as long as other watchers	1619	// it will not be executed as long as other watchers
1400	// with the default priority are receiving events.	1620	// with the default priority are receiving events.
1401	ev_idle_start (EV_A_ &idle);	1621	ev_idle_start (EV_A_ &idle);
1402	}	1622	}
1403		1623
…		…
1428		1648
1429	This section describes each watcher in detail, but will not repeat	1649	This section describes each watcher in detail, but will not repeat
1430	information given in the last section. Any initialisation/set macros,	1650	information given in the last section. Any initialisation/set macros,
1431	functions and members specific to the watcher type are explained.	1651	functions and members specific to the watcher type are explained.
1432		1652
1433	Members are additionally marked with either I<[read-only]>, meaning that,	1653	Most members are additionally marked with either I<[read-only]>, meaning
1434	while the watcher is active, you can look at the member and expect some	1654	that, while the watcher is active, you can look at the member and expect
1435	sensible content, but you must not modify it (you can modify it while the	1655	some sensible content, but you must not modify it (you can modify it while
1436	watcher is stopped to your hearts content), or I<[read-write]>, which	1656	the watcher is stopped to your hearts content), or I<[read-write]>, which
1437	means you can expect it to have some sensible content while the watcher	1657	means you can expect it to have some sensible content while the watcher
1438	is active, but you can also modify it. Modifying it may not do something	1658	is active, but you can also modify it. Modifying it may not do something
1439	sensible or take immediate effect (or do anything at all), but libev will	1659	sensible or take immediate effect (or do anything at all), but libev will
1440	not crash or malfunction in any way.	1660	not crash or malfunction in any way.
1441		1661
		1662	In any case, the documentation for each member will explain what the
		1663	effects are, and if there are any additional access restrictions.
1442		1664
1443	=head2 C<ev_io> - is this file descriptor readable or writable?	1665	=head2 C<ev_io> - is this file descriptor readable or writable?
1444		1666
1445	I/O watchers check whether a file descriptor is readable or writable	1667	I/O watchers check whether a file descriptor is readable or writable
1446	in each iteration of the event loop, or, more precisely, when reading	1668	in each iteration of the event loop, or, more precisely, when reading
…		…
1453	In general you can register as many read and/or write event watchers per	1675	In general you can register as many read and/or write event watchers per
1454	fd as you want (as long as you don't confuse yourself). Setting all file	1676	fd as you want (as long as you don't confuse yourself). Setting all file
1455	descriptors to non-blocking mode is also usually a good idea (but not	1677	descriptors to non-blocking mode is also usually a good idea (but not
1456	required if you know what you are doing).	1678	required if you know what you are doing).
1457		1679
1458	If you cannot use non-blocking mode, then force the use of a
1459	known-to-be-good backend (at the time of this writing, this includes only
1460	C<EVBACKEND_SELECT> and C<EVBACKEND_POLL>). The same applies to file
1461	descriptors for which non-blocking operation makes no sense (such as
1462	files) - libev doesn't guarentee any specific behaviour in that case.
1463
1464	Another thing you have to watch out for is that it is quite easy to	1680	Another thing you have to watch out for is that it is quite easy to
1465	receive "spurious" readiness notifications, that is your callback might	1681	receive "spurious" readiness notifications, that is, your callback might
1466	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1682	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
1467	because there is no data. Not only are some backends known to create a	1683	because there is no data. It is very easy to get into this situation even
1468	lot of those (for example Solaris ports), it is very easy to get into	1684	with a relatively standard program structure. Thus it is best to always
1469	this situation even with a relatively standard program structure. Thus	1685	use non-blocking I/O: An extra C<read>(2) returning C<EAGAIN> is far
1470	it is best to always use non-blocking I/O: An extra C<read>(2) returning
1471	C<EAGAIN> is far preferable to a program hanging until some data arrives.	1686	preferable to a program hanging until some data arrives.
1472		1687
1473	If you cannot run the fd in non-blocking mode (for example you should	1688	If you cannot run the fd in non-blocking mode (for example you should
1474	not play around with an Xlib connection), then you have to separately	1689	not play around with an Xlib connection), then you have to separately
1475	re-test whether a file descriptor is really ready with a known-to-be good	1690	re-test whether a file descriptor is really ready with a known-to-be good
1476	interface such as poll (fortunately in our Xlib example, Xlib already	1691	interface such as poll (fortunately in the case of Xlib, it already does
1477	does this on its own, so its quite safe to use). Some people additionally	1692	this on its own, so its quite safe to use). Some people additionally
1478	use C<SIGALRM> and an interval timer, just to be sure you won't block	1693	use C<SIGALRM> and an interval timer, just to be sure you won't block
1479	indefinitely.	1694	indefinitely.
1480		1695
1481	But really, best use non-blocking mode.	1696	But really, best use non-blocking mode.
1482		1697
1483	=head3 The special problem of disappearing file descriptors	1698	=head3 The special problem of disappearing file descriptors
1484		1699
1485	Some backends (e.g. kqueue, epoll) need to be told about closing a file	1700	Some backends (e.g. kqueue, epoll, linuxaio) need to be told about closing
1486	descriptor (either due to calling C<close> explicitly or any other means,	1701	a file descriptor (either due to calling C<close> explicitly or any other
1487	such as C<dup2>). The reason is that you register interest in some file	1702	means, such as C<dup2>). The reason is that you register interest in some
1488	descriptor, but when it goes away, the operating system will silently drop	1703	file descriptor, but when it goes away, the operating system will silently
1489	this interest. If another file descriptor with the same number then is	1704	drop this interest. If another file descriptor with the same number then
1490	registered with libev, there is no efficient way to see that this is, in	1705	is registered with libev, there is no efficient way to see that this is,
1491	fact, a different file descriptor.	1706	in fact, a different file descriptor.
1492		1707
1493	To avoid having to explicitly tell libev about such cases, libev follows	1708	To avoid having to explicitly tell libev about such cases, libev follows
1494	the following policy: Each time C<ev_io_set> is being called, libev	1709	the following policy: Each time C<ev_io_set> is being called, libev
1495	will assume that this is potentially a new file descriptor, otherwise	1710	will assume that this is potentially a new file descriptor, otherwise
1496	it is assumed that the file descriptor stays the same. That means that	1711	it is assumed that the file descriptor stays the same. That means that
…		…
1510		1725
1511	There is no workaround possible except not registering events	1726	There is no workaround possible except not registering events
1512	for potentially C<dup ()>'ed file descriptors, or to resort to	1727	for potentially C<dup ()>'ed file descriptors, or to resort to
1513	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.	1728	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1514		1729
		1730	=head3 The special problem of files
		1731
		1732	Many people try to use C<select> (or libev) on file descriptors
		1733	representing files, and expect it to become ready when their program
		1734	doesn't block on disk accesses (which can take a long time on their own).
		1735
		1736	However, this cannot ever work in the "expected" way - you get a readiness
		1737	notification as soon as the kernel knows whether and how much data is
		1738	there, and in the case of open files, that's always the case, so you
		1739	always get a readiness notification instantly, and your read (or possibly
		1740	write) will still block on the disk I/O.
		1741
		1742	Another way to view it is that in the case of sockets, pipes, character
		1743	devices and so on, there is another party (the sender) that delivers data
		1744	on its own, but in the case of files, there is no such thing: the disk
		1745	will not send data on its own, simply because it doesn't know what you
		1746	wish to read - you would first have to request some data.
		1747
		1748	Since files are typically not-so-well supported by advanced notification
		1749	mechanism, libev tries hard to emulate POSIX behaviour with respect
		1750	to files, even though you should not use it. The reason for this is
		1751	convenience: sometimes you want to watch STDIN or STDOUT, which is
		1752	usually a tty, often a pipe, but also sometimes files or special devices
		1753	(for example, C<epoll> on Linux works with F</dev/random> but not with
		1754	F</dev/urandom>), and even though the file might better be served with
		1755	asynchronous I/O instead of with non-blocking I/O, it is still useful when
		1756	it "just works" instead of freezing.
		1757
		1758	So avoid file descriptors pointing to files when you know it (e.g. use
		1759	libeio), but use them when it is convenient, e.g. for STDIN/STDOUT, or
		1760	when you rarely read from a file instead of from a socket, and want to
		1761	reuse the same code path.
		1762
1515	=head3 The special problem of fork	1763	=head3 The special problem of fork
1516		1764
1517	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit	1765	Some backends (epoll, kqueue, linuxaio, iouring) do not support C<fork ()>
1518	useless behaviour. Libev fully supports fork, but needs to be told about	1766	at all or exhibit useless behaviour. Libev fully supports fork, but needs
1519	it in the child.	1767	to be told about it in the child if you want to continue to use it in the
		1768	child.
1520		1769
1521	To support fork in your programs, you either have to call	1770	To support fork in your child processes, you have to call C<ev_loop_fork
1522	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,	1771	()> after a fork in the child, enable C<EVFLAG_FORKCHECK>, or resort to
1523	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or	1772	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1524	C<EVBACKEND_POLL>.
1525		1773
1526	=head3 The special problem of SIGPIPE	1774	=head3 The special problem of SIGPIPE
1527		1775
1528	While not really specific to libev, it is easy to forget about C<SIGPIPE>:	1776	While not really specific to libev, it is easy to forget about C<SIGPIPE>:
1529	when writing to a pipe whose other end has been closed, your program gets	1777	when writing to a pipe whose other end has been closed, your program gets
…		…
1532		1780
1533	So when you encounter spurious, unexplained daemon exits, make sure you	1781	So when you encounter spurious, unexplained daemon exits, make sure you
1534	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon	1782	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
1535	somewhere, as that would have given you a big clue).	1783	somewhere, as that would have given you a big clue).
1536		1784
		1785	=head3 The special problem of accept()ing when you can't
		1786
		1787	Many implementations of the POSIX C<accept> function (for example,
		1788	found in post-2004 Linux) have the peculiar behaviour of not removing a
		1789	connection from the pending queue in all error cases.
		1790
		1791	For example, larger servers often run out of file descriptors (because
		1792	of resource limits), causing C<accept> to fail with C<ENFILE> but not
		1793	rejecting the connection, leading to libev signalling readiness on
		1794	the next iteration again (the connection still exists after all), and
		1795	typically causing the program to loop at 100% CPU usage.
		1796
		1797	Unfortunately, the set of errors that cause this issue differs between
		1798	operating systems, there is usually little the app can do to remedy the
		1799	situation, and no known thread-safe method of removing the connection to
		1800	cope with overload is known (to me).
		1801
		1802	One of the easiest ways to handle this situation is to just ignore it
		1803	- when the program encounters an overload, it will just loop until the
		1804	situation is over. While this is a form of busy waiting, no OS offers an
		1805	event-based way to handle this situation, so it's the best one can do.
		1806
		1807	A better way to handle the situation is to log any errors other than
		1808	C<EAGAIN> and C<EWOULDBLOCK>, making sure not to flood the log with such
		1809	messages, and continue as usual, which at least gives the user an idea of
		1810	what could be wrong ("raise the ulimit!"). For extra points one could stop
		1811	the C<ev_io> watcher on the listening fd "for a while", which reduces CPU
		1812	usage.
		1813
		1814	If your program is single-threaded, then you could also keep a dummy file
		1815	descriptor for overload situations (e.g. by opening F</dev/null>), and
		1816	when you run into C<ENFILE> or C<EMFILE>, close it, run C<accept>,
		1817	close that fd, and create a new dummy fd. This will gracefully refuse
		1818	clients under typical overload conditions.
		1819
		1820	The last way to handle it is to simply log the error and C<exit>, as
		1821	is often done with C<malloc> failures, but this results in an easy
		1822	opportunity for a DoS attack.
1537		1823
1538	=head3 Watcher-Specific Functions	1824	=head3 Watcher-Specific Functions
1539		1825
1540	=over 4	1826	=over 4
1541		1827
…		…
1545		1831
1546	Configures an C<ev_io> watcher. The C<fd> is the file descriptor to	1832	Configures an C<ev_io> watcher. The C<fd> is the file descriptor to
1547	receive events for and C<events> is either C<EV_READ>, C<EV_WRITE> or	1833	receive events for and C<events> is either C<EV_READ>, C<EV_WRITE> or
1548	C<EV_READ | EV_WRITE>, to express the desire to receive the given events.	1834	C<EV_READ | EV_WRITE>, to express the desire to receive the given events.
1549		1835
1550	=item int fd [read-only]	1836	=item ev_io_modify (ev_io *, int events)
1551		1837
1552	The file descriptor being watched.	1838	Similar to C<ev_io_set>, but only changes the event mask. Using this might
		1839	be faster with some backends, as libev can assume that the C<fd> still
		1840	refers to the same underlying file description, something it cannot do
		1841	when using C<ev_io_set>.
1553		1842
		1843	=item int fd [no-modify]
		1844
		1845	The file descriptor being watched. While it can be read at any time, you
		1846	must not modify this member even when the watcher is stopped - always use
		1847	C<ev_io_set> for that.
		1848
1554	=item int events [read-only]	1849	=item int events [no-modify]
1555		1850
1556	The events being watched.	1851	The set of events being watched, among other flags. This field is a
		1852	bit set - to test for C<EV_READ>, use C<< w->events & EV_READ >>, and
		1853	similarly for C<EV_WRITE>.
		1854
		1855	As with C<fd>, you must not modify this member even when the watcher is
		1856	stopped, always use C<ev_io_set> or C<ev_io_modify> for that.
1557		1857
1558	=back	1858	=back
1559		1859
1560	=head3 Examples	1860	=head3 Examples
1561		1861
…		…
1573	...	1873	...
1574	struct ev_loop *loop = ev_default_init (0);	1874	struct ev_loop *loop = ev_default_init (0);
1575	ev_io stdin_readable;	1875	ev_io stdin_readable;
1576	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);	1876	ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
1577	ev_io_start (loop, &stdin_readable);	1877	ev_io_start (loop, &stdin_readable);
1578	ev_loop (loop, 0);	1878	ev_run (loop, 0);
1579		1879
1580		1880
1581	=head2 C<ev_timer> - relative and optionally repeating timeouts	1881	=head2 C<ev_timer> - relative and optionally repeating timeouts
1582		1882
1583	Timer watchers are simple relative timers that generate an event after a	1883	Timer watchers are simple relative timers that generate an event after a
…		…
1589	detecting time jumps is hard, and some inaccuracies are unavoidable (the	1889	detecting time jumps is hard, and some inaccuracies are unavoidable (the
1590	monotonic clock option helps a lot here).	1890	monotonic clock option helps a lot here).
1591		1891
1592	The callback is guaranteed to be invoked only I<after> its timeout has	1892	The callback is guaranteed to be invoked only I<after> its timeout has
1593	passed (not I<at>, so on systems with very low-resolution clocks this	1893	passed (not I<at>, so on systems with very low-resolution clocks this
1594	might introduce a small delay). If multiple timers become ready during the	1894	might introduce a small delay, see "the special problem of being too
		1895	early", below). If multiple timers become ready during the same loop
1595	same loop iteration then the ones with earlier time-out values are invoked	1896	iteration then the ones with earlier time-out values are invoked before
1596	before ones of the same priority with later time-out values (but this is	1897	ones of the same priority with later time-out values (but this is no
1597	no longer true when a callback calls C<ev_loop> recursively).	1898	longer true when a callback calls C<ev_run> recursively).
1598		1899
1599	=head3 Be smart about timeouts	1900	=head3 Be smart about timeouts
1600		1901
1601	Many real-world problems involve some kind of timeout, usually for error	1902	Many real-world problems involve some kind of timeout, usually for error
1602	recovery. A typical example is an HTTP request - if the other side hangs,	1903	recovery. A typical example is an HTTP request - if the other side hangs,
…		…
1677		1978
1678	In this case, it would be more efficient to leave the C<ev_timer> alone,	1979	In this case, it would be more efficient to leave the C<ev_timer> alone,
1679	but remember the time of last activity, and check for a real timeout only	1980	but remember the time of last activity, and check for a real timeout only
1680	within the callback:	1981	within the callback:
1681		1982
		1983	ev_tstamp timeout = 60.;
1682	ev_tstamp last_activity; // time of last activity	1984	ev_tstamp last_activity; // time of last activity
		1985	ev_timer timer;
1683		1986
1684	static void	1987	static void
1685	callback (EV_P_ ev_timer *w, int revents)	1988	callback (EV_P_ ev_timer *w, int revents)
1686	{	1989	{
1687	ev_tstamp now = ev_now (EV_A);	1990	// calculate when the timeout would happen
1688	ev_tstamp timeout = last_activity + 60.;	1991	ev_tstamp after = last_activity - ev_now (EV_A) + timeout;
1689		1992
1690	// if last_activity + 60. is older than now, we did time out	1993	// if negative, it means we the timeout already occurred
1691	if (timeout < now)	1994	if (after < 0.)
1692	{	1995	{
1693	// timeout occured, take action	1996	// timeout occurred, take action
1694	}	1997	}
1695	else	1998	else
1696	{	1999	{
1697	// callback was invoked, but there was some activity, re-arm	2000	// callback was invoked, but there was some recent
1698	// the watcher to fire in last_activity + 60, which is	2001	// activity. simply restart the timer to time out
1699	// guaranteed to be in the future, so "again" is positive:	2002	// after "after" seconds, which is the earliest time
1700	w->repeat = timeout - now;	2003	// the timeout can occur.
		2004	ev_timer_set (w, after, 0.);
1701	ev_timer_again (EV_A_ w);	2005	ev_timer_start (EV_A_ w);
1702	}	2006	}
1703	}	2007	}
1704		2008
1705	To summarise the callback: first calculate the real timeout (defined	2009	To summarise the callback: first calculate in how many seconds the
1706	as "60 seconds after the last activity"), then check if that time has	2010	timeout will occur (by calculating the absolute time when it would occur,
1707	been reached, which means something I<did>, in fact, time out. Otherwise	2011	C<last_activity + timeout>, and subtracting the current time, C<ev_now
1708	the callback was invoked too early (C<timeout> is in the future), so	2012	(EV_A)> from that).
1709	re-schedule the timer to fire at that future time, to see if maybe we have
1710	a timeout then.
1711		2013
1712	Note how C<ev_timer_again> is used, taking advantage of the	2014	If this value is negative, then we are already past the timeout, i.e. we
1713	C<ev_timer_again> optimisation when the timer is already running.	2015	timed out, and need to do whatever is needed in this case.
		2016
		2017	Otherwise, we now the earliest time at which the timeout would trigger,
		2018	and simply start the timer with this timeout value.
		2019
		2020	In other words, each time the callback is invoked it will check whether
		2021	the timeout occurred. If not, it will simply reschedule itself to check
		2022	again at the earliest time it could time out. Rinse. Repeat.
1714		2023
1715	This scheme causes more callback invocations (about one every 60 seconds	2024	This scheme causes more callback invocations (about one every 60 seconds
1716	minus half the average time between activity), but virtually no calls to	2025	minus half the average time between activity), but virtually no calls to
1717	libev to change the timeout.	2026	libev to change the timeout.
1718		2027
1719	To start the timer, simply initialise the watcher and set C<last_activity>	2028	To start the machinery, simply initialise the watcher and set
1720	to the current time (meaning we just have some activity :), then call the	2029	C<last_activity> to the current time (meaning there was some activity just
1721	callback, which will "do the right thing" and start the timer:	2030	now), then call the callback, which will "do the right thing" and start
		2031	the timer:
1722		2032
		2033	last_activity = ev_now (EV_A);
1723	ev_init (timer, callback);	2034	ev_init (&timer, callback);
1724	last_activity = ev_now (loop);	2035	callback (EV_A_ &timer, 0);
1725	callback (loop, timer, EV_TIMEOUT);
1726		2036
1727	And when there is some activity, simply store the current time in	2037	When there is some activity, simply store the current time in
1728	C<last_activity>, no libev calls at all:	2038	C<last_activity>, no libev calls at all:
1729		2039
		2040	if (activity detected)
1730	last_actiivty = ev_now (loop);	2041	last_activity = ev_now (EV_A);
		2042
		2043	When your timeout value changes, then the timeout can be changed by simply
		2044	providing a new value, stopping the timer and calling the callback, which
		2045	will again do the right thing (for example, time out immediately :).
		2046
		2047	timeout = new_value;
		2048	ev_timer_stop (EV_A_ &timer);
		2049	callback (EV_A_ &timer, 0);
1731		2050
1732	This technique is slightly more complex, but in most cases where the	2051	This technique is slightly more complex, but in most cases where the
1733	time-out is unlikely to be triggered, much more efficient.	2052	time-out is unlikely to be triggered, much more efficient.
1734
1735	Changing the timeout is trivial as well (if it isn't hard-coded in the
1736	callback :) - just change the timeout and invoke the callback, which will
1737	fix things for you.
1738		2053
1739	=item 4. Wee, just use a double-linked list for your timeouts.	2054	=item 4. Wee, just use a double-linked list for your timeouts.
1740		2055
1741	If there is not one request, but many thousands (millions...), all	2056	If there is not one request, but many thousands (millions...), all
1742	employing some kind of timeout with the same timeout value, then one can	2057	employing some kind of timeout with the same timeout value, then one can
…		…
1769	Method #1 is almost always a bad idea, and buys you nothing. Method #4 is	2084	Method #1 is almost always a bad idea, and buys you nothing. Method #4 is
1770	rather complicated, but extremely efficient, something that really pays	2085	rather complicated, but extremely efficient, something that really pays
1771	off after the first million or so of active timers, i.e. it's usually	2086	off after the first million or so of active timers, i.e. it's usually
1772	overkill :)	2087	overkill :)
1773		2088
		2089	=head3 The special problem of being too early
		2090
		2091	If you ask a timer to call your callback after three seconds, then
		2092	you expect it to be invoked after three seconds - but of course, this
		2093	cannot be guaranteed to infinite precision. Less obviously, it cannot be
		2094	guaranteed to any precision by libev - imagine somebody suspending the
		2095	process with a STOP signal for a few hours for example.
		2096
		2097	So, libev tries to invoke your callback as soon as possible I<after> the
		2098	delay has occurred, but cannot guarantee this.
		2099
		2100	A less obvious failure mode is calling your callback too early: many event
		2101	loops compare timestamps with a "elapsed delay >= requested delay", but
		2102	this can cause your callback to be invoked much earlier than you would
		2103	expect.
		2104
		2105	To see why, imagine a system with a clock that only offers full second
		2106	resolution (think windows if you can't come up with a broken enough OS
		2107	yourself). If you schedule a one-second timer at the time 500.9, then the
		2108	event loop will schedule your timeout to elapse at a system time of 500
		2109	(500.9 truncated to the resolution) + 1, or 501.
		2110
		2111	If an event library looks at the timeout 0.1s later, it will see "501 >=
		2112	501" and invoke the callback 0.1s after it was started, even though a
		2113	one-second delay was requested - this is being "too early", despite best
		2114	intentions.
		2115
		2116	This is the reason why libev will never invoke the callback if the elapsed
		2117	delay equals the requested delay, but only when the elapsed delay is
		2118	larger than the requested delay. In the example above, libev would only invoke
		2119	the callback at system time 502, or 1.1s after the timer was started.
		2120
		2121	So, while libev cannot guarantee that your callback will be invoked
		2122	exactly when requested, it I<can> and I<does> guarantee that the requested
		2123	delay has actually elapsed, or in other words, it always errs on the "too
		2124	late" side of things.
		2125
1774	=head3 The special problem of time updates	2126	=head3 The special problem of time updates
1775		2127
1776	Establishing the current time is a costly operation (it usually takes at	2128	Establishing the current time is a costly operation (it usually takes
1777	least two system calls): EV therefore updates its idea of the current	2129	at least one system call): EV therefore updates its idea of the current
1778	time only before and after C<ev_loop> collects new events, which causes a	2130	time only before and after C<ev_run> collects new events, which causes a
1779	growing difference between C<ev_now ()> and C<ev_time ()> when handling	2131	growing difference between C<ev_now ()> and C<ev_time ()> when handling
1780	lots of events in one iteration.	2132	lots of events in one iteration.
1781		2133
1782	The relative timeouts are calculated relative to the C<ev_now ()>	2134	The relative timeouts are calculated relative to the C<ev_now ()>
1783	time. This is usually the right thing as this timestamp refers to the time	2135	time. This is usually the right thing as this timestamp refers to the time
1784	of the event triggering whatever timeout you are modifying/starting. If	2136	of the event triggering whatever timeout you are modifying/starting. If
1785	you suspect event processing to be delayed and you I<need> to base the	2137	you suspect event processing to be delayed and you I<need> to base the
1786	timeout on the current time, use something like this to adjust for this:	2138	timeout on the current time, use something like the following to adjust
		2139	for it:
1787		2140
1788	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);	2141	ev_timer_set (&timer, after + (ev_time () - ev_now ()), 0.);
1789		2142
1790	If the event loop is suspended for a long time, you can also force an	2143	If the event loop is suspended for a long time, you can also force an
1791	update of the time returned by C<ev_now ()> by calling C<ev_now_update	2144	update of the time returned by C<ev_now ()> by calling C<ev_now_update
1792	()>.	2145	()>, although that will push the event time of all outstanding events
		2146	further into the future.
		2147
		2148	=head3 The special problem of unsynchronised clocks
		2149
		2150	Modern systems have a variety of clocks - libev itself uses the normal
		2151	"wall clock" clock and, if available, the monotonic clock (to avoid time
		2152	jumps).
		2153
		2154	Neither of these clocks is synchronised with each other or any other clock
		2155	on the system, so C<ev_time ()> might return a considerably different time
		2156	than C<gettimeofday ()> or C<time ()>. On a GNU/Linux system, for example,
		2157	a call to C<gettimeofday> might return a second count that is one higher
		2158	than a directly following call to C<time>.
		2159
		2160	The moral of this is to only compare libev-related timestamps with
		2161	C<ev_time ()> and C<ev_now ()>, at least if you want better precision than
		2162	a second or so.
		2163
		2164	One more problem arises due to this lack of synchronisation: if libev uses
		2165	the system monotonic clock and you compare timestamps from C<ev_time>
		2166	or C<ev_now> from when you started your timer and when your callback is
		2167	invoked, you will find that sometimes the callback is a bit "early".
		2168
		2169	This is because C<ev_timer>s work in real time, not wall clock time, so
		2170	libev makes sure your callback is not invoked before the delay happened,
		2171	I<measured according to the real time>, not the system clock.
		2172
		2173	If your timeouts are based on a physical timescale (e.g. "time out this
		2174	connection after 100 seconds") then this shouldn't bother you as it is
		2175	exactly the right behaviour.
		2176
		2177	If you want to compare wall clock/system timestamps to your timers, then
		2178	you need to use C<ev_periodic>s, as these are based on the wall clock
		2179	time, where your comparisons will always generate correct results.
1793		2180
1794	=head3 The special problems of suspended animation	2181	=head3 The special problems of suspended animation
1795		2182
1796	When you leave the server world it is quite customary to hit machines that	2183	When you leave the server world it is quite customary to hit machines that
1797	can suspend/hibernate - what happens to the clocks during such a suspend?	2184	can suspend/hibernate - what happens to the clocks during such a suspend?
…		…
1827		2214
1828	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	2215	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
1829		2216
1830	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)	2217	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)
1831		2218
1832	Configure the timer to trigger after C<after> seconds. If C<repeat>	2219	Configure the timer to trigger after C<after> seconds (fractional and
1833	is C<0.>, then it will automatically be stopped once the timeout is	2220	negative values are supported). If C<repeat> is C<0.>, then it will
1834	reached. If it is positive, then the timer will automatically be	2221	automatically be stopped once the timeout is reached. If it is positive,
1835	configured to trigger again C<repeat> seconds later, again, and again,	2222	then the timer will automatically be configured to trigger again C<repeat>
1836	until stopped manually.	2223	seconds later, again, and again, until stopped manually.
1837		2224
1838	The timer itself will do a best-effort at avoiding drift, that is, if	2225	The timer itself will do a best-effort at avoiding drift, that is, if
1839	you configure a timer to trigger every 10 seconds, then it will normally	2226	you configure a timer to trigger every 10 seconds, then it will normally
1840	trigger at exactly 10 second intervals. If, however, your program cannot	2227	trigger at exactly 10 second intervals. If, however, your program cannot
1841	keep up with the timer (because it takes longer than those 10 seconds to	2228	keep up with the timer (because it takes longer than those 10 seconds to
1842	do stuff) the timer will not fire more than once per event loop iteration.	2229	do stuff) the timer will not fire more than once per event loop iteration.
1843		2230
1844	=item ev_timer_again (loop, ev_timer *)	2231	=item ev_timer_again (loop, ev_timer *)
1845		2232
1846	This will act as if the timer timed out and restart it again if it is	2233	This will act as if the timer timed out, and restarts it again if it is
1847	repeating. The exact semantics are:	2234	repeating. It basically works like calling C<ev_timer_stop>, updating the
		2235	timeout to the C<repeat> value and calling C<ev_timer_start>.
1848		2236
		2237	The exact semantics are as in the following rules, all of which will be
		2238	applied to the watcher:
		2239
		2240	=over 4
		2241
1849	If the timer is pending, its pending status is cleared.	2242	=item If the timer is pending, the pending status is always cleared.
1850		2243
1851	If the timer is started but non-repeating, stop it (as if it timed out).	2244	=item If the timer is started but non-repeating, stop it (as if it timed
		2245	out, without invoking it).
1852		2246
1853	If the timer is repeating, either start it if necessary (with the	2247	=item If the timer is repeating, make the C<repeat> value the new timeout
1854	C<repeat> value), or reset the running timer to the C<repeat> value.	2248	and start the timer, if necessary.
1855		2249
		2250	=back
		2251
1856	This sounds a bit complicated, see L<Be smart about timeouts>, above, for a	2252	This sounds a bit complicated, see L</Be smart about timeouts>, above, for a
1857	usage example.	2253	usage example.
1858		2254
1859	=item ev_timer_remaining (loop, ev_timer *)	2255	=item ev_tstamp ev_timer_remaining (loop, ev_timer *)
1860		2256
1861	Returns the remaining time until a timer fires. If the timer is active,	2257	Returns the remaining time until a timer fires. If the timer is active,
1862	then this time is relative to the current event loop time, otherwise it's	2258	then this time is relative to the current event loop time, otherwise it's
1863	the timeout value currently configured.	2259	the timeout value currently configured.
1864		2260
1865	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns	2261	That is, after an C<ev_timer_set (w, 5, 7)>, C<ev_timer_remaining> returns
1866	C<5>. When the timer is started and one second passes, C<ev_timer_remain>	2262	C<5>. When the timer is started and one second passes, C<ev_timer_remaining>
1867	will return C<4>. When the timer expires and is restarted, it will return	2263	will return C<4>. When the timer expires and is restarted, it will return
1868	roughly C<7> (likely slightly less as callback invocation takes some time,	2264	roughly C<7> (likely slightly less as callback invocation takes some time,
1869	too), and so on.	2265	too), and so on.
1870		2266
1871	=item ev_tstamp repeat [read-write]	2267	=item ev_tstamp repeat [read-write]
…		…
1900	}	2296	}
1901		2297
1902	ev_timer mytimer;	2298	ev_timer mytimer;
1903	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */	2299	ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
1904	ev_timer_again (&mytimer); /* start timer */	2300	ev_timer_again (&mytimer); /* start timer */
1905	ev_loop (loop, 0);	2301	ev_run (loop, 0);
1906		2302
1907	// and in some piece of code that gets executed on any "activity":	2303	// and in some piece of code that gets executed on any "activity":
1908	// reset the timeout to start ticking again at 10 seconds	2304	// reset the timeout to start ticking again at 10 seconds
1909	ev_timer_again (&mytimer);	2305	ev_timer_again (&mytimer);
1910		2306
…		…
1914	Periodic watchers are also timers of a kind, but they are very versatile	2310	Periodic watchers are also timers of a kind, but they are very versatile
1915	(and unfortunately a bit complex).	2311	(and unfortunately a bit complex).
1916		2312
1917	Unlike C<ev_timer>, periodic watchers are not based on real time (or	2313	Unlike C<ev_timer>, periodic watchers are not based on real time (or
1918	relative time, the physical time that passes) but on wall clock time	2314	relative time, the physical time that passes) but on wall clock time
1919	(absolute time, the thing you can read on your calender or clock). The	2315	(absolute time, the thing you can read on your calendar or clock). The
1920	difference is that wall clock time can run faster or slower than real	2316	difference is that wall clock time can run faster or slower than real
1921	time, and time jumps are not uncommon (e.g. when you adjust your	2317	time, and time jumps are not uncommon (e.g. when you adjust your
1922	wrist-watch).	2318	wrist-watch).
1923		2319
1924	You can tell a periodic watcher to trigger after some specific point	2320	You can tell a periodic watcher to trigger after some specific point
…		…
1929	C<ev_timer>, which would still trigger roughly 10 seconds after starting	2325	C<ev_timer>, which would still trigger roughly 10 seconds after starting
1930	it, as it uses a relative timeout).	2326	it, as it uses a relative timeout).
1931		2327
1932	C<ev_periodic> watchers can also be used to implement vastly more complex	2328	C<ev_periodic> watchers can also be used to implement vastly more complex
1933	timers, such as triggering an event on each "midnight, local time", or	2329	timers, such as triggering an event on each "midnight, local time", or
1934	other complicated rules. This cannot be done with C<ev_timer> watchers, as	2330	other complicated rules. This cannot easily be done with C<ev_timer>
1935	those cannot react to time jumps.	2331	watchers, as those cannot react to time jumps.
1936		2332
1937	As with timers, the callback is guaranteed to be invoked only when the	2333	As with timers, the callback is guaranteed to be invoked only when the
1938	point in time where it is supposed to trigger has passed. If multiple	2334	point in time where it is supposed to trigger has passed. If multiple
1939	timers become ready during the same loop iteration then the ones with	2335	timers become ready during the same loop iteration then the ones with
1940	earlier time-out values are invoked before ones with later time-out values	2336	earlier time-out values are invoked before ones with later time-out values
1941	(but this is no longer true when a callback calls C<ev_loop> recursively).	2337	(but this is no longer true when a callback calls C<ev_run> recursively).
1942		2338
1943	=head3 Watcher-Specific Functions and Data Members	2339	=head3 Watcher-Specific Functions and Data Members
1944		2340
1945	=over 4	2341	=over 4
1946		2342
…		…
1981		2377
1982	Another way to think about it (for the mathematically inclined) is that	2378	Another way to think about it (for the mathematically inclined) is that
1983	C<ev_periodic> will try to run the callback in this mode at the next possible	2379	C<ev_periodic> will try to run the callback in this mode at the next possible
1984	time where C<time = offset (mod interval)>, regardless of any time jumps.	2380	time where C<time = offset (mod interval)>, regardless of any time jumps.
1985		2381
1986	For numerical stability it is preferable that the C<offset> value is near	2382	The C<interval> I<MUST> be positive, and for numerical stability, the
1987	C<ev_now ()> (the current time), but there is no range requirement for	2383	interval value should be higher than C<1/8192> (which is around 100
1988	this value, and in fact is often specified as zero.	2384	microseconds) and C<offset> should be higher than C<0> and should have
		2385	at most a similar magnitude as the current time (say, within a factor of
		2386	ten). Typical values for offset are, in fact, C<0> or something between
		2387	C<0> and C<interval>, which is also the recommended range.
1989		2388
1990	Note also that there is an upper limit to how often a timer can fire (CPU	2389	Note also that there is an upper limit to how often a timer can fire (CPU
1991	speed for example), so if C<interval> is very small then timing stability	2390	speed for example), so if C<interval> is very small then timing stability
1992	will of course deteriorate. Libev itself tries to be exact to be about one	2391	will of course deteriorate. Libev itself tries to be exact to be about one
1993	millisecond (if the OS supports it and the machine is fast enough).	2392	millisecond (if the OS supports it and the machine is fast enough).
…		…
2023		2422
2024	NOTE: I<< This callback must always return a time that is higher than or	2423	NOTE: I<< This callback must always return a time that is higher than or
2025	equal to the passed C<now> value >>.	2424	equal to the passed C<now> value >>.
2026		2425
2027	This can be used to create very complex timers, such as a timer that	2426	This can be used to create very complex timers, such as a timer that
2028	triggers on "next midnight, local time". To do this, you would calculate the	2427	triggers on "next midnight, local time". To do this, you would calculate
2029	next midnight after C<now> and return the timestamp value for this. How	2428	the next midnight after C<now> and return the timestamp value for
2030	you do this is, again, up to you (but it is not trivial, which is the main	2429	this. Here is a (completely untested, no error checking) example on how to
2031	reason I omitted it as an example).	2430	do this:
		2431
		2432	#include <time.h>
		2433
		2434	static ev_tstamp
		2435	my_rescheduler (ev_periodic *w, ev_tstamp now)
		2436	{
		2437	time_t tnow = (time_t)now;
		2438	struct tm tm;
		2439	localtime_r (&tnow, &tm);
		2440
		2441	tm.tm_sec = tm.tm_min = tm.tm_hour = 0; // midnight current day
		2442	++tm.tm_mday; // midnight next day
		2443
		2444	return mktime (&tm);
		2445	}
		2446
		2447	Note: this code might run into trouble on days that have more then two
		2448	midnights (beginning and end).
2032		2449
2033	=back	2450	=back
2034		2451
2035	=item ev_periodic_again (loop, ev_periodic *)	2452	=item ev_periodic_again (loop, ev_periodic *)
2036		2453
…		…
2074	Example: Call a callback every hour, or, more precisely, whenever the	2491	Example: Call a callback every hour, or, more precisely, whenever the
2075	system time is divisible by 3600. The callback invocation times have	2492	system time is divisible by 3600. The callback invocation times have
2076	potentially a lot of jitter, but good long-term stability.	2493	potentially a lot of jitter, but good long-term stability.
2077		2494
2078	static void	2495	static void
2079	clock_cb (struct ev_loop *loop, ev_io *w, int revents)	2496	clock_cb (struct ev_loop *loop, ev_periodic *w, int revents)
2080	{	2497	{
2081	... its now a full hour (UTC, or TAI or whatever your clock follows)	2498	... its now a full hour (UTC, or TAI or whatever your clock follows)
2082	}	2499	}
2083		2500
2084	ev_periodic hourly_tick;	2501	ev_periodic hourly_tick;
…		…
2101		2518
2102	ev_periodic hourly_tick;	2519	ev_periodic hourly_tick;
2103	ev_periodic_init (&hourly_tick, clock_cb,	2520	ev_periodic_init (&hourly_tick, clock_cb,
2104	fmod (ev_now (loop), 3600.), 3600., 0);	2521	fmod (ev_now (loop), 3600.), 3600., 0);
2105	ev_periodic_start (loop, &hourly_tick);	2522	ev_periodic_start (loop, &hourly_tick);
2106		2523
2107		2524
2108	=head2 C<ev_signal> - signal me when a signal gets signalled!	2525	=head2 C<ev_signal> - signal me when a signal gets signalled!
2109		2526
2110	Signal watchers will trigger an event when the process receives a specific	2527	Signal watchers will trigger an event when the process receives a specific
2111	signal one or more times. Even though signals are very asynchronous, libev	2528	signal one or more times. Even though signals are very asynchronous, libev
2112	will try it's best to deliver signals synchronously, i.e. as part of the	2529	will try its best to deliver signals synchronously, i.e. as part of the
2113	normal event processing, like any other event.	2530	normal event processing, like any other event.
2114		2531
2115	If you want signals to be delivered truly asynchronously, just use	2532	If you want signals to be delivered truly asynchronously, just use
2116	C<sigaction> as you would do without libev and forget about sharing	2533	C<sigaction> as you would do without libev and forget about sharing
2117	the signal. You can even use C<ev_async> from a signal handler to	2534	the signal. You can even use C<ev_async> from a signal handler to
…		…
2121	only within the same loop, i.e. you can watch for C<SIGINT> in your	2538	only within the same loop, i.e. you can watch for C<SIGINT> in your
2122	default loop and for C<SIGIO> in another loop, but you cannot watch for	2539	default loop and for C<SIGIO> in another loop, but you cannot watch for
2123	C<SIGINT> in both the default loop and another loop at the same time. At	2540	C<SIGINT> in both the default loop and another loop at the same time. At
2124	the moment, C<SIGCHLD> is permanently tied to the default loop.	2541	the moment, C<SIGCHLD> is permanently tied to the default loop.
2125		2542
2126	When the first watcher gets started will libev actually register something	2543	Only after the first watcher for a signal is started will libev actually
2127	with the kernel (thus it coexists with your own signal handlers as long as	2544	register something with the kernel. It thus coexists with your own signal
2128	you don't register any with libev for the same signal).	2545	handlers as long as you don't register any with libev for the same signal.
2129		2546
2130	If possible and supported, libev will install its handlers with	2547	If possible and supported, libev will install its handlers with
2131	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should	2548	C<SA_RESTART> (or equivalent) behaviour enabled, so system calls should
2132	not be unduly interrupted. If you have a problem with system calls getting	2549	not be unduly interrupted. If you have a problem with system calls getting
2133	interrupted by signals you can block all signals in an C<ev_check> watcher	2550	interrupted by signals you can block all signals in an C<ev_check> watcher
2134	and unblock them in an C<ev_prepare> watcher.	2551	and unblock them in an C<ev_prepare> watcher.
2135		2552
2136	=head3 The special problem of inheritance over execve	2553	=head3 The special problem of inheritance over fork/execve/pthread_create
2137		2554
2138	Both the signal mask (C<sigprocmask>) and the signal disposition	2555	Both the signal mask (C<sigprocmask>) and the signal disposition
2139	(C<sigaction>) are unspecified after starting a signal watcher (and after	2556	(C<sigaction>) are unspecified after starting a signal watcher (and after
2140	stopping it again), that is, libev might or might not block the signal,	2557	stopping it again), that is, libev might or might not block the signal,
2141	and might or might not set or restore the installed signal handler.	2558	and might or might not set or restore the installed signal handler (but
		2559	see C<EVFLAG_NOSIGMASK>).
2142		2560
2143	While this does not matter for the signal disposition (libev never	2561	While this does not matter for the signal disposition (libev never
2144	sets signals to C<SIG_IGN>, so handlers will be reset to C<SIG_DFL> on	2562	sets signals to C<SIG_IGN>, so handlers will be reset to C<SIG_DFL> on
2145	C<execve>), this matters for the signal mask: many programs do not expect	2563	C<execve>), this matters for the signal mask: many programs do not expect
2146	certain signals to be blocked.	2564	certain signals to be blocked.
…		…
2151		2569
2152	The simplest way to ensure that the signal mask is reset in the child is	2570	The simplest way to ensure that the signal mask is reset in the child is
2153	to install a fork handler with C<pthread_atfork> that resets it. That will	2571	to install a fork handler with C<pthread_atfork> that resets it. That will
2154	catch fork calls done by libraries (such as the libc) as well.	2572	catch fork calls done by libraries (such as the libc) as well.
2155		2573
2156	In current versions of libev, you can also ensure that the signal mask is	2574	In current versions of libev, the signal will not be blocked indefinitely
2157	not blocking any signals (except temporarily, so thread users watch out)	2575	unless you use the C<signalfd> API (C<EV_SIGNALFD>). While this reduces
2158	by specifying the C<EVFLAG_NOSIGFD> when creating the event loop. This	2576	the window of opportunity for problems, it will not go away, as libev
2159	is not guaranteed for future versions, however.	2577	I<has> to modify the signal mask, at least temporarily.
		2578
		2579	So I can't stress this enough: I<If you do not reset your signal mask when
		2580	you expect it to be empty, you have a race condition in your code>. This
		2581	is not a libev-specific thing, this is true for most event libraries.
		2582
		2583	=head3 The special problem of threads signal handling
		2584
		2585	POSIX threads has problematic signal handling semantics, specifically,
		2586	a lot of functionality (sigfd, sigwait etc.) only really works if all
		2587	threads in a process block signals, which is hard to achieve.
		2588
		2589	When you want to use sigwait (or mix libev signal handling with your own
		2590	for the same signals), you can tackle this problem by globally blocking
		2591	all signals before creating any threads (or creating them with a fully set
		2592	sigprocmask) and also specifying the C<EVFLAG_NOSIGMASK> when creating
		2593	loops. Then designate one thread as "signal receiver thread" which handles
		2594	these signals. You can pass on any signals that libev might be interested
		2595	in by calling C<ev_feed_signal>.
2160		2596
2161	=head3 Watcher-Specific Functions and Data Members	2597	=head3 Watcher-Specific Functions and Data Members
2162		2598
2163	=over 4	2599	=over 4
2164		2600
…		…
2180	Example: Try to exit cleanly on SIGINT.	2616	Example: Try to exit cleanly on SIGINT.
2181		2617
2182	static void	2618	static void
2183	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)	2619	sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)
2184	{	2620	{
2185	ev_unloop (loop, EVUNLOOP_ALL);	2621	ev_break (loop, EVBREAK_ALL);
2186	}	2622	}
2187		2623
2188	ev_signal signal_watcher;	2624	ev_signal signal_watcher;
2189	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	2625	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
2190	ev_signal_start (loop, &signal_watcher);	2626	ev_signal_start (loop, &signal_watcher);
…		…
2299		2735
2300	=head2 C<ev_stat> - did the file attributes just change?	2736	=head2 C<ev_stat> - did the file attributes just change?
2301		2737
2302	This watches a file system path for attribute changes. That is, it calls	2738	This watches a file system path for attribute changes. That is, it calls
2303	C<stat> on that path in regular intervals (or when the OS says it changed)	2739	C<stat> on that path in regular intervals (or when the OS says it changed)
2304	and sees if it changed compared to the last time, invoking the callback if	2740	and sees if it changed compared to the last time, invoking the callback
2305	it did.	2741	if it did. Starting the watcher C<stat>'s the file, so only changes that
		2742	happen after the watcher has been started will be reported.
2306		2743
2307	The path does not need to exist: changing from "path exists" to "path does	2744	The path does not need to exist: changing from "path exists" to "path does
2308	not exist" is a status change like any other. The condition "path does not	2745	not exist" is a status change like any other. The condition "path does not
2309	exist" (or more correctly "path cannot be stat'ed") is signified by the	2746	exist" (or more correctly "path cannot be stat'ed") is signified by the
2310	C<st_nlink> field being zero (which is otherwise always forced to be at	2747	C<st_nlink> field being zero (which is otherwise always forced to be at
…		…
2540	Apart from keeping your process non-blocking (which is a useful	2977	Apart from keeping your process non-blocking (which is a useful
2541	effect on its own sometimes), idle watchers are a good place to do	2978	effect on its own sometimes), idle watchers are a good place to do
2542	"pseudo-background processing", or delay processing stuff to after the	2979	"pseudo-background processing", or delay processing stuff to after the
2543	event loop has handled all outstanding events.	2980	event loop has handled all outstanding events.
2544		2981
		2982	=head3 Abusing an C<ev_idle> watcher for its side-effect
		2983
		2984	As long as there is at least one active idle watcher, libev will never
		2985	sleep unnecessarily. Or in other words, it will loop as fast as possible.
		2986	For this to work, the idle watcher doesn't need to be invoked at all - the
		2987	lowest priority will do.
		2988
		2989	This mode of operation can be useful together with an C<ev_check> watcher,
		2990	to do something on each event loop iteration - for example to balance load
		2991	between different connections.
		2992
		2993	See L</Abusing an ev_check watcher for its side-effect> for a longer
		2994	example.
		2995
2545	=head3 Watcher-Specific Functions and Data Members	2996	=head3 Watcher-Specific Functions and Data Members
2546		2997
2547	=over 4	2998	=over 4
2548		2999
2549	=item ev_idle_init (ev_idle *, callback)	3000	=item ev_idle_init (ev_idle *, callback)
…		…
2560	callback, free it. Also, use no error checking, as usual.	3011	callback, free it. Also, use no error checking, as usual.
2561		3012
2562	static void	3013	static void
2563	idle_cb (struct ev_loop *loop, ev_idle *w, int revents)	3014	idle_cb (struct ev_loop *loop, ev_idle *w, int revents)
2564	{	3015	{
		3016	// stop the watcher
		3017	ev_idle_stop (loop, w);
		3018
		3019	// now we can free it
2565	free (w);	3020	free (w);
		3021
2566	// now do something you wanted to do when the program has	3022	// now do something you wanted to do when the program has
2567	// no longer anything immediate to do.	3023	// no longer anything immediate to do.
2568	}	3024	}
2569		3025
2570	ev_idle *idle_watcher = malloc (sizeof (ev_idle));	3026	ev_idle *idle_watcher = malloc (sizeof (ev_idle));
…		…
2572	ev_idle_start (loop, idle_watcher);	3028	ev_idle_start (loop, idle_watcher);
2573		3029
2574		3030
2575	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!	3031	=head2 C<ev_prepare> and C<ev_check> - customise your event loop!
2576		3032
2577	Prepare and check watchers are usually (but not always) used in pairs:	3033	Prepare and check watchers are often (but not always) used in pairs:
2578	prepare watchers get invoked before the process blocks and check watchers	3034	prepare watchers get invoked before the process blocks and check watchers
2579	afterwards.	3035	afterwards.
2580		3036
2581	You I<must not> call C<ev_loop> or similar functions that enter	3037	You I<must not> call C<ev_run> (or similar functions that enter the
2582	the current event loop from either C<ev_prepare> or C<ev_check>	3038	current event loop) or C<ev_loop_fork> from either C<ev_prepare> or
2583	watchers. Other loops than the current one are fine, however. The	3039	C<ev_check> watchers. Other loops than the current one are fine,
2584	rationale behind this is that you do not need to check for recursion in	3040	however. The rationale behind this is that you do not need to check
2585	those watchers, i.e. the sequence will always be C<ev_prepare>, blocking,	3041	for recursion in those watchers, i.e. the sequence will always be
2586	C<ev_check> so if you have one watcher of each kind they will always be	3042	C<ev_prepare>, blocking, C<ev_check> so if you have one watcher of each
2587	called in pairs bracketing the blocking call.	3043	kind they will always be called in pairs bracketing the blocking call.
2588		3044
2589	Their main purpose is to integrate other event mechanisms into libev and	3045	Their main purpose is to integrate other event mechanisms into libev and
2590	their use is somewhat advanced. They could be used, for example, to track	3046	their use is somewhat advanced. They could be used, for example, to track
2591	variable changes, implement your own watchers, integrate net-snmp or a	3047	variable changes, implement your own watchers, integrate net-snmp or a
2592	coroutine library and lots more. They are also occasionally useful if	3048	coroutine library and lots more. They are also occasionally useful if
…		…
2610	with priority higher than or equal to the event loop and one coroutine	3066	with priority higher than or equal to the event loop and one coroutine
2611	of lower priority, but only once, using idle watchers to keep the event	3067	of lower priority, but only once, using idle watchers to keep the event
2612	loop from blocking if lower-priority coroutines are active, thus mapping	3068	loop from blocking if lower-priority coroutines are active, thus mapping
2613	low-priority coroutines to idle/background tasks).	3069	low-priority coroutines to idle/background tasks).
2614		3070
2615	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)	3071	When used for this purpose, it is recommended to give C<ev_check> watchers
2616	priority, to ensure that they are being run before any other watchers	3072	highest (C<EV_MAXPRI>) priority, to ensure that they are being run before
2617	after the poll (this doesn't matter for C<ev_prepare> watchers).	3073	any other watchers after the poll (this doesn't matter for C<ev_prepare>
		3074	watchers).
2618		3075
2619	Also, C<ev_check> watchers (and C<ev_prepare> watchers, too) should not	3076	Also, C<ev_check> watchers (and C<ev_prepare> watchers, too) should not
2620	activate ("feed") events into libev. While libev fully supports this, they	3077	activate ("feed") events into libev. While libev fully supports this, they
2621	might get executed before other C<ev_check> watchers did their job. As	3078	might get executed before other C<ev_check> watchers did their job. As
2622	C<ev_check> watchers are often used to embed other (non-libev) event	3079	C<ev_check> watchers are often used to embed other (non-libev) event
2623	loops those other event loops might be in an unusable state until their	3080	loops those other event loops might be in an unusable state until their
2624	C<ev_check> watcher ran (always remind yourself to coexist peacefully with	3081	C<ev_check> watcher ran (always remind yourself to coexist peacefully with
2625	others).	3082	others).
		3083
		3084	=head3 Abusing an C<ev_check> watcher for its side-effect
		3085
		3086	C<ev_check> (and less often also C<ev_prepare>) watchers can also be
		3087	useful because they are called once per event loop iteration. For
		3088	example, if you want to handle a large number of connections fairly, you
		3089	normally only do a bit of work for each active connection, and if there
		3090	is more work to do, you wait for the next event loop iteration, so other
		3091	connections have a chance of making progress.
		3092
		3093	Using an C<ev_check> watcher is almost enough: it will be called on the
		3094	next event loop iteration. However, that isn't as soon as possible -
		3095	without external events, your C<ev_check> watcher will not be invoked.
		3096
		3097	This is where C<ev_idle> watchers come in handy - all you need is a
		3098	single global idle watcher that is active as long as you have one active
		3099	C<ev_check> watcher. The C<ev_idle> watcher makes sure the event loop
		3100	will not sleep, and the C<ev_check> watcher makes sure a callback gets
		3101	invoked. Neither watcher alone can do that.
2626		3102
2627	=head3 Watcher-Specific Functions and Data Members	3103	=head3 Watcher-Specific Functions and Data Members
2628		3104
2629	=over 4	3105	=over 4
2630		3106
…		…
2754		3230
2755	if (timeout >= 0)	3231	if (timeout >= 0)
2756	// create/start timer	3232	// create/start timer
2757		3233
2758	// poll	3234	// poll
2759	ev_loop (EV_A_ 0);	3235	ev_run (EV_A_ 0);
2760		3236
2761	// stop timer again	3237	// stop timer again
2762	if (timeout >= 0)	3238	if (timeout >= 0)
2763	ev_timer_stop (EV_A_ &to);	3239	ev_timer_stop (EV_A_ &to);
2764		3240
…		…
2831		3307
2832	=over 4	3308	=over 4
2833		3309
2834	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)	3310	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
2835		3311
2836	=item ev_embed_set (ev_embed *, callback, struct ev_loop *embedded_loop)	3312	=item ev_embed_set (ev_embed *, struct ev_loop *embedded_loop)
2837		3313
2838	Configures the watcher to embed the given loop, which must be	3314	Configures the watcher to embed the given loop, which must be
2839	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be	3315	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
2840	invoked automatically, otherwise it is the responsibility of the callback	3316	invoked automatically, otherwise it is the responsibility of the callback
2841	to invoke it (it will continue to be called until the sweep has been done,	3317	to invoke it (it will continue to be called until the sweep has been done,
2842	if you do not want that, you need to temporarily stop the embed watcher).	3318	if you do not want that, you need to temporarily stop the embed watcher).
2843		3319
2844	=item ev_embed_sweep (loop, ev_embed *)	3320	=item ev_embed_sweep (loop, ev_embed *)
2845		3321
2846	Make a single, non-blocking sweep over the embedded loop. This works	3322	Make a single, non-blocking sweep over the embedded loop. This works
2847	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	3323	similarly to C<ev_run (embedded_loop, EVRUN_NOWAIT)>, but in the most
2848	appropriate way for embedded loops.	3324	appropriate way for embedded loops.
2849		3325
2850	=item struct ev_loop *other [read-only]	3326	=item struct ev_loop *other [read-only]
2851		3327
2852	The embedded event loop.	3328	The embedded event loop.
…		…
2862	used).	3338	used).
2863		3339
2864	struct ev_loop *loop_hi = ev_default_init (0);	3340	struct ev_loop *loop_hi = ev_default_init (0);
2865	struct ev_loop *loop_lo = 0;	3341	struct ev_loop *loop_lo = 0;
2866	ev_embed embed;	3342	ev_embed embed;
2867		3343
2868	// see if there is a chance of getting one that works	3344	// see if there is a chance of getting one that works
2869	// (remember that a flags value of 0 means autodetection)	3345	// (remember that a flags value of 0 means autodetection)
2870	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()	3346	loop_lo = ev_embeddable_backends () & ev_recommended_backends ()
2871	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())	3347	? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())
2872	: 0;	3348	: 0;
…		…
2886	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).	3362	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
2887		3363
2888	struct ev_loop *loop = ev_default_init (0);	3364	struct ev_loop *loop = ev_default_init (0);
2889	struct ev_loop *loop_socket = 0;	3365	struct ev_loop *loop_socket = 0;
2890	ev_embed embed;	3366	ev_embed embed;
2891		3367
2892	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)	3368	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
2893	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))	3369	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
2894	{	3370	{
2895	ev_embed_init (&embed, 0, loop_socket);	3371	ev_embed_init (&embed, 0, loop_socket);
2896	ev_embed_start (loop, &embed);	3372	ev_embed_start (loop, &embed);
…		…
2904		3380
2905	=head2 C<ev_fork> - the audacity to resume the event loop after a fork	3381	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
2906		3382
2907	Fork watchers are called when a C<fork ()> was detected (usually because	3383	Fork watchers are called when a C<fork ()> was detected (usually because
2908	whoever is a good citizen cared to tell libev about it by calling	3384	whoever is a good citizen cared to tell libev about it by calling
2909	C<ev_default_fork> or C<ev_loop_fork>). The invocation is done before the	3385	C<ev_loop_fork>). The invocation is done before the event loop blocks next
2910	event loop blocks next and before C<ev_check> watchers are being called,	3386	and before C<ev_check> watchers are being called, and only in the child
2911	and only in the child after the fork. If whoever good citizen calling	3387	after the fork. If whoever good citizen calling C<ev_default_fork> cheats
2912	C<ev_default_fork> cheats and calls it in the wrong process, the fork	3388	and calls it in the wrong process, the fork handlers will be invoked, too,
2913	handlers will be invoked, too, of course.	3389	of course.
2914		3390
2915	=head3 The special problem of life after fork - how is it possible?	3391	=head3 The special problem of life after fork - how is it possible?
2916		3392
2917	Most uses of C<fork()> consist of forking, then some simple calls to ste	3393	Most uses of C<fork ()> consist of forking, then some simple calls to set
2918	up/change the process environment, followed by a call to C<exec()>. This	3394	up/change the process environment, followed by a call to C<exec()>. This
2919	sequence should be handled by libev without any problems.	3395	sequence should be handled by libev without any problems.
2920		3396
2921	This changes when the application actually wants to do event handling	3397	This changes when the application actually wants to do event handling
2922	in the child, or both parent in child, in effect "continuing" after the	3398	in the child, or both parent in child, in effect "continuing" after the
…		…
2938	disadvantage of having to use multiple event loops (which do not support	3414	disadvantage of having to use multiple event loops (which do not support
2939	signal watchers).	3415	signal watchers).
2940		3416
2941	When this is not possible, or you want to use the default loop for	3417	When this is not possible, or you want to use the default loop for
2942	other reasons, then in the process that wants to start "fresh", call	3418	other reasons, then in the process that wants to start "fresh", call
2943	C<ev_default_destroy ()> followed by C<ev_default_loop (...)>. Destroying	3419	C<ev_loop_destroy (EV_DEFAULT)> followed by C<ev_default_loop (...)>.
2944	the default loop will "orphan" (not stop) all registered watchers, so you	3420	Destroying the default loop will "orphan" (not stop) all registered
2945	have to be careful not to execute code that modifies those watchers. Note	3421	watchers, so you have to be careful not to execute code that modifies
2946	also that in that case, you have to re-register any signal watchers.	3422	those watchers. Note also that in that case, you have to re-register any
		3423	signal watchers.
2947		3424
2948	=head3 Watcher-Specific Functions and Data Members	3425	=head3 Watcher-Specific Functions and Data Members
2949		3426
2950	=over 4	3427	=over 4
2951		3428
2952	=item ev_fork_init (ev_signal *, callback)	3429	=item ev_fork_init (ev_fork *, callback)
2953		3430
2954	Initialises and configures the fork watcher - it has no parameters of any	3431	Initialises and configures the fork watcher - it has no parameters of any
2955	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,	3432	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
2956	believe me.	3433	really.
2957		3434
2958	=back	3435	=back
2959		3436
2960		3437
		3438	=head2 C<ev_cleanup> - even the best things end
		3439
		3440	Cleanup watchers are called just before the event loop is being destroyed
		3441	by a call to C<ev_loop_destroy>.
		3442
		3443	While there is no guarantee that the event loop gets destroyed, cleanup
		3444	watchers provide a convenient method to install cleanup hooks for your
		3445	program, worker threads and so on - you just to make sure to destroy the
		3446	loop when you want them to be invoked.
		3447
		3448	Cleanup watchers are invoked in the same way as any other watcher. Unlike
		3449	all other watchers, they do not keep a reference to the event loop (which
		3450	makes a lot of sense if you think about it). Like all other watchers, you
		3451	can call libev functions in the callback, except C<ev_cleanup_start>.
		3452
		3453	=head3 Watcher-Specific Functions and Data Members
		3454
		3455	=over 4
		3456
		3457	=item ev_cleanup_init (ev_cleanup *, callback)
		3458
		3459	Initialises and configures the cleanup watcher - it has no parameters of
		3460	any kind. There is a C<ev_cleanup_set> macro, but using it is utterly
		3461	pointless, I assure you.
		3462
		3463	=back
		3464
		3465	Example: Register an atexit handler to destroy the default loop, so any
		3466	cleanup functions are called.
		3467
		3468	static void
		3469	program_exits (void)
		3470	{
		3471	ev_loop_destroy (EV_DEFAULT_UC);
		3472	}
		3473
		3474	...
		3475	atexit (program_exits);
		3476
		3477
2961	=head2 C<ev_async> - how to wake up another event loop	3478	=head2 C<ev_async> - how to wake up an event loop
2962		3479
2963	In general, you cannot use an C<ev_loop> from multiple threads or other	3480	In general, you cannot use an C<ev_loop> from multiple threads or other
2964	asynchronous sources such as signal handlers (as opposed to multiple event	3481	asynchronous sources such as signal handlers (as opposed to multiple event
2965	loops - those are of course safe to use in different threads).	3482	loops - those are of course safe to use in different threads).
2966		3483
2967	Sometimes, however, you need to wake up another event loop you do not	3484	Sometimes, however, you need to wake up an event loop you do not control,
2968	control, for example because it belongs to another thread. This is what	3485	for example because it belongs to another thread. This is what C<ev_async>
2969	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you	3486	watchers do: as long as the C<ev_async> watcher is active, you can signal
2970	can signal it by calling C<ev_async_send>, which is thread- and signal	3487	it by calling C<ev_async_send>, which is thread- and signal safe.
2971	safe.
2972		3488
2973	This functionality is very similar to C<ev_signal> watchers, as signals,	3489	This functionality is very similar to C<ev_signal> watchers, as signals,
2974	too, are asynchronous in nature, and signals, too, will be compressed	3490	too, are asynchronous in nature, and signals, too, will be compressed
2975	(i.e. the number of callback invocations may be less than the number of	3491	(i.e. the number of callback invocations may be less than the number of
2976	C<ev_async_sent> calls).	3492	C<ev_async_send> calls). In fact, you could use signal watchers as a kind
2977		3493	of "global async watchers" by using a watcher on an otherwise unused
2978	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not	3494	signal, and C<ev_feed_signal> to signal this watcher from another thread,
2979	just the default loop.	3495	even without knowing which loop owns the signal.
2980		3496
2981	=head3 Queueing	3497	=head3 Queueing
2982		3498
2983	C<ev_async> does not support queueing of data in any way. The reason	3499	C<ev_async> does not support queueing of data in any way. The reason
2984	is that the author does not know of a simple (or any) algorithm for a	3500	is that the author does not know of a simple (or any) algorithm for a
2985	multiple-writer-single-reader queue that works in all cases and doesn't	3501	multiple-writer-single-reader queue that works in all cases and doesn't
2986	need elaborate support such as pthreads.	3502	need elaborate support such as pthreads or unportable memory access
		3503	semantics.
2987		3504
2988	That means that if you want to queue data, you have to provide your own	3505	That means that if you want to queue data, you have to provide your own
2989	queue. But at least I can tell you how to implement locking around your	3506	queue. But at least I can tell you how to implement locking around your
2990	queue:	3507	queue:
2991		3508
…		…
3075	trust me.	3592	trust me.
3076		3593
3077	=item ev_async_send (loop, ev_async *)	3594	=item ev_async_send (loop, ev_async *)
3078		3595
3079	Sends/signals/activates the given C<ev_async> watcher, that is, feeds	3596	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
3080	an C<EV_ASYNC> event on the watcher into the event loop. Unlike	3597	an C<EV_ASYNC> event on the watcher into the event loop, and instantly
		3598	returns.
		3599
3081	C<ev_feed_event>, this call is safe to do from other threads, signal or	3600	Unlike C<ev_feed_event>, this call is safe to do from other threads,
3082	similar contexts (see the discussion of C<EV_ATOMIC_T> in the embedding	3601	signal or similar contexts (see the discussion of C<EV_ATOMIC_T> in the
3083	section below on what exactly this means).	3602	embedding section below on what exactly this means).
3084		3603
3085	Note that, as with other watchers in libev, multiple events might get	3604	Note that, as with other watchers in libev, multiple events might get
3086	compressed into a single callback invocation (another way to look at this	3605	compressed into a single callback invocation (another way to look at
3087	is that C<ev_async> watchers are level-triggered, set on C<ev_async_send>,	3606	this is that C<ev_async> watchers are level-triggered: they are set on
3088	reset when the event loop detects that).	3607	C<ev_async_send>, reset when the event loop detects that).
3089		3608
3090	This call incurs the overhead of a system call only once per event loop	3609	This call incurs the overhead of at most one extra system call per event
3091	iteration, so while the overhead might be noticeable, it doesn't apply to	3610	loop iteration, if the event loop is blocked, and no syscall at all if
3092	repeated calls to C<ev_async_send> for the same event loop.	3611	the event loop (or your program) is processing events. That means that
		3612	repeated calls are basically free (there is no need to avoid calls for
		3613	performance reasons) and that the overhead becomes smaller (typically
		3614	zero) under load.
3093		3615
3094	=item bool = ev_async_pending (ev_async *)	3616	=item bool = ev_async_pending (ev_async *)
3095		3617
3096	Returns a non-zero value when C<ev_async_send> has been called on the	3618	Returns a non-zero value when C<ev_async_send> has been called on the
3097	watcher but the event has not yet been processed (or even noted) by the	3619	watcher but the event has not yet been processed (or even noted) by the
…		…
3114		3636
3115	There are some other functions of possible interest. Described. Here. Now.	3637	There are some other functions of possible interest. Described. Here. Now.
3116		3638
3117	=over 4	3639	=over 4
3118		3640
3119	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback)	3641	=item ev_once (loop, int fd, int events, ev_tstamp timeout, callback, arg)
3120		3642
3121	This function combines a simple timer and an I/O watcher, calls your	3643	This function combines a simple timer and an I/O watcher, calls your
3122	callback on whichever event happens first and automatically stops both	3644	callback on whichever event happens first and automatically stops both
3123	watchers. This is useful if you want to wait for a single event on an fd	3645	watchers. This is useful if you want to wait for a single event on an fd
3124	or timeout without having to allocate/configure/start/stop/free one or	3646	or timeout without having to allocate/configure/start/stop/free one or
…		…
3130		3652
3131	If C<timeout> is less than 0, then no timeout watcher will be	3653	If C<timeout> is less than 0, then no timeout watcher will be
3132	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and	3654	started. Otherwise an C<ev_timer> watcher with after = C<timeout> (and
3133	repeat = 0) will be started. C<0> is a valid timeout.	3655	repeat = 0) will be started. C<0> is a valid timeout.
3134		3656
3135	The callback has the type C<void (*cb)(int revents, void *arg)> and gets	3657	The callback has the type C<void (*cb)(int revents, void *arg)> and is
3136	passed an C<revents> set like normal event callbacks (a combination of	3658	passed an C<revents> set like normal event callbacks (a combination of
3137	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMEOUT>) and the C<arg>	3659	C<EV_ERROR>, C<EV_READ>, C<EV_WRITE> or C<EV_TIMER>) and the C<arg>
3138	value passed to C<ev_once>. Note that it is possible to receive I<both>	3660	value passed to C<ev_once>. Note that it is possible to receive I<both>
3139	a timeout and an io event at the same time - you probably should give io	3661	a timeout and an io event at the same time - you probably should give io
3140	events precedence.	3662	events precedence.
3141		3663
3142	Example: wait up to ten seconds for data to appear on STDIN_FILENO.	3664	Example: wait up to ten seconds for data to appear on STDIN_FILENO.
3143		3665
3144	static void stdin_ready (int revents, void *arg)	3666	static void stdin_ready (int revents, void *arg)
3145	{	3667	{
3146	if (revents & EV_READ)	3668	if (revents & EV_READ)
3147	/* stdin might have data for us, joy! */;	3669	/* stdin might have data for us, joy! */;
3148	else if (revents & EV_TIMEOUT)	3670	else if (revents & EV_TIMER)
3149	/* doh, nothing entered */;	3671	/* doh, nothing entered */;
3150	}	3672	}
3151		3673
3152	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);	3674	ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);
3153		3675
3154	=item ev_feed_fd_event (struct ev_loop *, int fd, int revents)	3676	=item ev_feed_fd_event (loop, int fd, int revents)
3155		3677
3156	Feed an event on the given fd, as if a file descriptor backend detected	3678	Feed an event on the given fd, as if a file descriptor backend detected
3157	the given events it.	3679	the given events.
3158		3680
3159	=item ev_feed_signal_event (struct ev_loop *loop, int signum)	3681	=item ev_feed_signal_event (loop, int signum)
3160		3682
3161	Feed an event as if the given signal occurred (C<loop> must be the default	3683	Feed an event as if the given signal occurred. See also C<ev_feed_signal>,
3162	loop!).	3684	which is async-safe.
3163		3685
3164	=back	3686	=back
		3687
		3688
		3689	=head1 COMMON OR USEFUL IDIOMS (OR BOTH)
		3690
		3691	This section explains some common idioms that are not immediately
		3692	obvious. Note that examples are sprinkled over the whole manual, and this
		3693	section only contains stuff that wouldn't fit anywhere else.
		3694
		3695	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
		3696
		3697	Each watcher has, by default, a C<void *data> member that you can read
		3698	or modify at any time: libev will completely ignore it. This can be used
		3699	to associate arbitrary data with your watcher. If you need more data and
		3700	don't want to allocate memory separately and store a pointer to it in that
		3701	data member, you can also "subclass" the watcher type and provide your own
		3702	data:
		3703
		3704	struct my_io
		3705	{
		3706	ev_io io;
		3707	int otherfd;
		3708	void *somedata;
		3709	struct whatever *mostinteresting;
		3710	};
		3711
		3712	...
		3713	struct my_io w;
		3714	ev_io_init (&w.io, my_cb, fd, EV_READ);
		3715
		3716	And since your callback will be called with a pointer to the watcher, you
		3717	can cast it back to your own type:
		3718
		3719	static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)
		3720	{
		3721	struct my_io *w = (struct my_io *)w_;
		3722	...
		3723	}
		3724
		3725	More interesting and less C-conformant ways of casting your callback
		3726	function type instead have been omitted.
		3727
		3728	=head2 BUILDING YOUR OWN COMPOSITE WATCHERS
		3729
		3730	Another common scenario is to use some data structure with multiple
		3731	embedded watchers, in effect creating your own watcher that combines
		3732	multiple libev event sources into one "super-watcher":
		3733
		3734	struct my_biggy
		3735	{
		3736	int some_data;
		3737	ev_timer t1;
		3738	ev_timer t2;
		3739	}
		3740
		3741	In this case getting the pointer to C<my_biggy> is a bit more
		3742	complicated: Either you store the address of your C<my_biggy> struct in
		3743	the C<data> member of the watcher (for woozies or C++ coders), or you need
		3744	to use some pointer arithmetic using C<offsetof> inside your watchers (for
		3745	real programmers):
		3746
		3747	#include <stddef.h>
		3748
		3749	static void
		3750	t1_cb (EV_P_ ev_timer *w, int revents)
		3751	{
		3752	struct my_biggy big = (struct my_biggy *)
		3753	(((char *)w) - offsetof (struct my_biggy, t1));
		3754	}
		3755
		3756	static void
		3757	t2_cb (EV_P_ ev_timer *w, int revents)
		3758	{
		3759	struct my_biggy big = (struct my_biggy *)
		3760	(((char *)w) - offsetof (struct my_biggy, t2));
		3761	}
		3762
		3763	=head2 AVOIDING FINISHING BEFORE RETURNING
		3764
		3765	Often you have structures like this in event-based programs:
		3766
		3767	callback ()
		3768	{
		3769	free (request);
		3770	}
		3771
		3772	request = start_new_request (..., callback);
		3773
		3774	The intent is to start some "lengthy" operation. The C<request> could be
		3775	used to cancel the operation, or do other things with it.
		3776
		3777	It's not uncommon to have code paths in C<start_new_request> that
		3778	immediately invoke the callback, for example, to report errors. Or you add
		3779	some caching layer that finds that it can skip the lengthy aspects of the
		3780	operation and simply invoke the callback with the result.
		3781
		3782	The problem here is that this will happen I<before> C<start_new_request>
		3783	has returned, so C<request> is not set.
		3784
		3785	Even if you pass the request by some safer means to the callback, you
		3786	might want to do something to the request after starting it, such as
		3787	canceling it, which probably isn't working so well when the callback has
		3788	already been invoked.
		3789
		3790	A common way around all these issues is to make sure that
		3791	C<start_new_request> I<always> returns before the callback is invoked. If
		3792	C<start_new_request> immediately knows the result, it can artificially
		3793	delay invoking the callback by using a C<prepare> or C<idle> watcher for
		3794	example, or more sneakily, by reusing an existing (stopped) watcher and
		3795	pushing it into the pending queue:
		3796
		3797	ev_set_cb (watcher, callback);
		3798	ev_feed_event (EV_A_ watcher, 0);
		3799
		3800	This way, C<start_new_request> can safely return before the callback is
		3801	invoked, while not delaying callback invocation too much.
		3802
		3803	=head2 MODEL/NESTED EVENT LOOP INVOCATIONS AND EXIT CONDITIONS
		3804
		3805	Often (especially in GUI toolkits) there are places where you have
		3806	I<modal> interaction, which is most easily implemented by recursively
		3807	invoking C<ev_run>.
		3808
		3809	This brings the problem of exiting - a callback might want to finish the
		3810	main C<ev_run> call, but not the nested one (e.g. user clicked "Quit", but
		3811	a modal "Are you sure?" dialog is still waiting), or just the nested one
		3812	and not the main one (e.g. user clocked "Ok" in a modal dialog), or some
		3813	other combination: In these cases, a simple C<ev_break> will not work.
		3814
		3815	The solution is to maintain "break this loop" variable for each C<ev_run>
		3816	invocation, and use a loop around C<ev_run> until the condition is
		3817	triggered, using C<EVRUN_ONCE>:
		3818
		3819	// main loop
		3820	int exit_main_loop = 0;
		3821
		3822	while (!exit_main_loop)
		3823	ev_run (EV_DEFAULT_ EVRUN_ONCE);
		3824
		3825	// in a modal watcher
		3826	int exit_nested_loop = 0;
		3827
		3828	while (!exit_nested_loop)
		3829	ev_run (EV_A_ EVRUN_ONCE);
		3830
		3831	To exit from any of these loops, just set the corresponding exit variable:
		3832
		3833	// exit modal loop
		3834	exit_nested_loop = 1;
		3835
		3836	// exit main program, after modal loop is finished
		3837	exit_main_loop = 1;
		3838
		3839	// exit both
		3840	exit_main_loop = exit_nested_loop = 1;
		3841
		3842	=head2 THREAD LOCKING EXAMPLE
		3843
		3844	Here is a fictitious example of how to run an event loop in a different
		3845	thread from where callbacks are being invoked and watchers are
		3846	created/added/removed.
		3847
		3848	For a real-world example, see the C<EV::Loop::Async> perl module,
		3849	which uses exactly this technique (which is suited for many high-level
		3850	languages).
		3851
		3852	The example uses a pthread mutex to protect the loop data, a condition
		3853	variable to wait for callback invocations, an async watcher to notify the
		3854	event loop thread and an unspecified mechanism to wake up the main thread.
		3855
		3856	First, you need to associate some data with the event loop:
		3857
		3858	typedef struct {
		3859	mutex_t lock; /* global loop lock */
		3860	ev_async async_w;
		3861	thread_t tid;
		3862	cond_t invoke_cv;
		3863	} userdata;
		3864
		3865	void prepare_loop (EV_P)
		3866	{
		3867	// for simplicity, we use a static userdata struct.
		3868	static userdata u;
		3869
		3870	ev_async_init (&u->async_w, async_cb);
		3871	ev_async_start (EV_A_ &u->async_w);
		3872
		3873	pthread_mutex_init (&u->lock, 0);
		3874	pthread_cond_init (&u->invoke_cv, 0);
		3875
		3876	// now associate this with the loop
		3877	ev_set_userdata (EV_A_ u);
		3878	ev_set_invoke_pending_cb (EV_A_ l_invoke);
		3879	ev_set_loop_release_cb (EV_A_ l_release, l_acquire);
		3880
		3881	// then create the thread running ev_run
		3882	pthread_create (&u->tid, 0, l_run, EV_A);
		3883	}
		3884
		3885	The callback for the C<ev_async> watcher does nothing: the watcher is used
		3886	solely to wake up the event loop so it takes notice of any new watchers
		3887	that might have been added:
		3888
		3889	static void
		3890	async_cb (EV_P_ ev_async *w, int revents)
		3891	{
		3892	// just used for the side effects
		3893	}
		3894
		3895	The C<l_release> and C<l_acquire> callbacks simply unlock/lock the mutex
		3896	protecting the loop data, respectively.
		3897
		3898	static void
		3899	l_release (EV_P)
		3900	{
		3901	userdata *u = ev_userdata (EV_A);
		3902	pthread_mutex_unlock (&u->lock);
		3903	}
		3904
		3905	static void
		3906	l_acquire (EV_P)
		3907	{
		3908	userdata *u = ev_userdata (EV_A);
		3909	pthread_mutex_lock (&u->lock);
		3910	}
		3911
		3912	The event loop thread first acquires the mutex, and then jumps straight
		3913	into C<ev_run>:
		3914
		3915	void *
		3916	l_run (void *thr_arg)
		3917	{
		3918	struct ev_loop *loop = (struct ev_loop *)thr_arg;
		3919
		3920	l_acquire (EV_A);
		3921	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
		3922	ev_run (EV_A_ 0);
		3923	l_release (EV_A);
		3924
		3925	return 0;
		3926	}
		3927
		3928	Instead of invoking all pending watchers, the C<l_invoke> callback will
		3929	signal the main thread via some unspecified mechanism (signals? pipe
		3930	writes? C<Async::Interrupt>?) and then waits until all pending watchers
		3931	have been called (in a while loop because a) spurious wakeups are possible
		3932	and b) skipping inter-thread-communication when there are no pending
		3933	watchers is very beneficial):
		3934
		3935	static void
		3936	l_invoke (EV_P)
		3937	{
		3938	userdata *u = ev_userdata (EV_A);
		3939
		3940	while (ev_pending_count (EV_A))
		3941	{
		3942	wake_up_other_thread_in_some_magic_or_not_so_magic_way ();
		3943	pthread_cond_wait (&u->invoke_cv, &u->lock);
		3944	}
		3945	}
		3946
		3947	Now, whenever the main thread gets told to invoke pending watchers, it
		3948	will grab the lock, call C<ev_invoke_pending> and then signal the loop
		3949	thread to continue:
		3950
		3951	static void
		3952	real_invoke_pending (EV_P)
		3953	{
		3954	userdata *u = ev_userdata (EV_A);
		3955
		3956	pthread_mutex_lock (&u->lock);
		3957	ev_invoke_pending (EV_A);
		3958	pthread_cond_signal (&u->invoke_cv);
		3959	pthread_mutex_unlock (&u->lock);
		3960	}
		3961
		3962	Whenever you want to start/stop a watcher or do other modifications to an
		3963	event loop, you will now have to lock:
		3964
		3965	ev_timer timeout_watcher;
		3966	userdata *u = ev_userdata (EV_A);
		3967
		3968	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
		3969
		3970	pthread_mutex_lock (&u->lock);
		3971	ev_timer_start (EV_A_ &timeout_watcher);
		3972	ev_async_send (EV_A_ &u->async_w);
		3973	pthread_mutex_unlock (&u->lock);
		3974
		3975	Note that sending the C<ev_async> watcher is required because otherwise
		3976	an event loop currently blocking in the kernel will have no knowledge
		3977	about the newly added timer. By waking up the loop it will pick up any new
		3978	watchers in the next event loop iteration.
		3979
		3980	=head2 THREADS, COROUTINES, CONTINUATIONS, QUEUES... INSTEAD OF CALLBACKS
		3981
		3982	While the overhead of a callback that e.g. schedules a thread is small, it
		3983	is still an overhead. If you embed libev, and your main usage is with some
		3984	kind of threads or coroutines, you might want to customise libev so that
		3985	doesn't need callbacks anymore.
		3986
		3987	Imagine you have coroutines that you can switch to using a function
		3988	C<switch_to (coro)>, that libev runs in a coroutine called C<libev_coro>
		3989	and that due to some magic, the currently active coroutine is stored in a
		3990	global called C<current_coro>. Then you can build your own "wait for libev
		3991	event" primitive by changing C<EV_CB_DECLARE> and C<EV_CB_INVOKE> (note
		3992	the differing C<;> conventions):
		3993
		3994	#define EV_CB_DECLARE(type) struct my_coro *cb;
		3995	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)
		3996
		3997	That means instead of having a C callback function, you store the
		3998	coroutine to switch to in each watcher, and instead of having libev call
		3999	your callback, you instead have it switch to that coroutine.
		4000
		4001	A coroutine might now wait for an event with a function called
		4002	C<wait_for_event>. (the watcher needs to be started, as always, but it doesn't
		4003	matter when, or whether the watcher is active or not when this function is
		4004	called):
		4005
		4006	void
		4007	wait_for_event (ev_watcher *w)
		4008	{
		4009	ev_set_cb (w, current_coro);
		4010	switch_to (libev_coro);
		4011	}
		4012
		4013	That basically suspends the coroutine inside C<wait_for_event> and
		4014	continues the libev coroutine, which, when appropriate, switches back to
		4015	this or any other coroutine.
		4016
		4017	You can do similar tricks if you have, say, threads with an event queue -
		4018	instead of storing a coroutine, you store the queue object and instead of
		4019	switching to a coroutine, you push the watcher onto the queue and notify
		4020	any waiters.
		4021
		4022	To embed libev, see L</EMBEDDING>, but in short, it's easiest to create two
		4023	files, F<my_ev.h> and F<my_ev.c> that include the respective libev files:
		4024
		4025	// my_ev.h
		4026	#define EV_CB_DECLARE(type) struct my_coro *cb;
		4027	#define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)
		4028	#include "../libev/ev.h"
		4029
		4030	// my_ev.c
		4031	#define EV_H "my_ev.h"
		4032	#include "../libev/ev.c"
		4033
		4034	And then use F<my_ev.h> when you would normally use F<ev.h>, and compile
		4035	F<my_ev.c> into your project. When properly specifying include paths, you
		4036	can even use F<ev.h> as header file name directly.
3165		4037
3166		4038
3167	=head1 LIBEVENT EMULATION	4039	=head1 LIBEVENT EMULATION
3168		4040
3169	Libev offers a compatibility emulation layer for libevent. It cannot	4041	Libev offers a compatibility emulation layer for libevent. It cannot
3170	emulate the internals of libevent, so here are some usage hints:	4042	emulate the internals of libevent, so here are some usage hints:
3171		4043
3172	=over 4	4044	=over 4
		4045
		4046	=item * Only the libevent-1.4.1-beta API is being emulated.
		4047
		4048	This was the newest libevent version available when libev was implemented,
		4049	and is still mostly unchanged in 2010.
3173		4050
3174	=item * Use it by including <event.h>, as usual.	4051	=item * Use it by including <event.h>, as usual.
3175		4052
3176	=item * The following members are fully supported: ev_base, ev_callback,	4053	=item * The following members are fully supported: ev_base, ev_callback,
3177	ev_arg, ev_fd, ev_res, ev_events.	4054	ev_arg, ev_fd, ev_res, ev_events.
…		…
3183	=item * Priorities are not currently supported. Initialising priorities	4060	=item * Priorities are not currently supported. Initialising priorities
3184	will fail and all watchers will have the same priority, even though there	4061	will fail and all watchers will have the same priority, even though there
3185	is an ev_pri field.	4062	is an ev_pri field.
3186		4063
3187	=item * In libevent, the last base created gets the signals, in libev, the	4064	=item * In libevent, the last base created gets the signals, in libev, the
3188	first base created (== the default loop) gets the signals.	4065	base that registered the signal gets the signals.
3189		4066
3190	=item * Other members are not supported.	4067	=item * Other members are not supported.
3191		4068
3192	=item * The libev emulation is I<not> ABI compatible to libevent, you need	4069	=item * The libev emulation is I<not> ABI compatible to libevent, you need
3193	to use the libev header file and library.	4070	to use the libev header file and library.
3194		4071
3195	=back	4072	=back
3196		4073
3197	=head1 C++ SUPPORT	4074	=head1 C++ SUPPORT
		4075
		4076	=head2 C API
		4077
		4078	The normal C API should work fine when used from C++: both ev.h and the
		4079	libev sources can be compiled as C++. Therefore, code that uses the C API
		4080	will work fine.
		4081
		4082	Proper exception specifications might have to be added to callbacks passed
		4083	to libev: exceptions may be thrown only from watcher callbacks, all other
		4084	callbacks (allocator, syserr, loop acquire/release and periodic reschedule
		4085	callbacks) must not throw exceptions, and might need a C<noexcept>
		4086	specification. If you have code that needs to be compiled as both C and
		4087	C++ you can use the C<EV_NOEXCEPT> macro for this:
		4088
		4089	static void
		4090	fatal_error (const char *msg) EV_NOEXCEPT
		4091	{
		4092	perror (msg);
		4093	abort ();
		4094	}
		4095
		4096	...
		4097	ev_set_syserr_cb (fatal_error);
		4098
		4099	The only API functions that can currently throw exceptions are C<ev_run>,
		4100	C<ev_invoke>, C<ev_invoke_pending> and C<ev_loop_destroy> (the latter
		4101	because it runs cleanup watchers).
		4102
		4103	Throwing exceptions in watcher callbacks is only supported if libev itself
		4104	is compiled with a C++ compiler or your C and C++ environments allow
		4105	throwing exceptions through C libraries (most do).
		4106
		4107	=head2 C++ API
3198		4108
3199	Libev comes with some simplistic wrapper classes for C++ that mainly allow	4109	Libev comes with some simplistic wrapper classes for C++ that mainly allow
3200	you to use some convenience methods to start/stop watchers and also change	4110	you to use some convenience methods to start/stop watchers and also change
3201	the callback model to a model using method callbacks on objects.	4111	the callback model to a model using method callbacks on objects.
3202		4112
3203	To use it,	4113	To use it,
3204		4114
3205	#include <ev++.h>	4115	#include <ev++.h>
3206		4116
3207	This automatically includes F<ev.h> and puts all of its definitions (many	4117	This automatically includes F<ev.h> and puts all of its definitions (many
3208	of them macros) into the global namespace. All C++ specific things are	4118	of them macros) into the global namespace. All C++ specific things are
3209	put into the C<ev> namespace. It should support all the same embedding	4119	put into the C<ev> namespace. It should support all the same embedding
…		…
3212	Care has been taken to keep the overhead low. The only data member the C++	4122	Care has been taken to keep the overhead low. The only data member the C++
3213	classes add (compared to plain C-style watchers) is the event loop pointer	4123	classes add (compared to plain C-style watchers) is the event loop pointer
3214	that the watcher is associated with (or no additional members at all if	4124	that the watcher is associated with (or no additional members at all if
3215	you disable C<EV_MULTIPLICITY> when embedding libev).	4125	you disable C<EV_MULTIPLICITY> when embedding libev).
3216		4126
3217	Currently, functions, and static and non-static member functions can be	4127	Currently, functions, static and non-static member functions and classes
3218	used as callbacks. Other types should be easy to add as long as they only	4128	with C<operator ()> can be used as callbacks. Other types should be easy
3219	need one additional pointer for context. If you need support for other	4129	to add as long as they only need one additional pointer for context. If
3220	types of functors please contact the author (preferably after implementing	4130	you need support for other types of functors please contact the author
3221	it).	4131	(preferably after implementing it).
		4132
		4133	For all this to work, your C++ compiler either has to use the same calling
		4134	conventions as your C compiler (for static member functions), or you have
		4135	to embed libev and compile libev itself as C++.
3222		4136
3223	Here is a list of things available in the C<ev> namespace:	4137	Here is a list of things available in the C<ev> namespace:
3224		4138
3225	=over 4	4139	=over 4
3226		4140
…		…
3236	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.	4150	=item C<ev::io>, C<ev::timer>, C<ev::periodic>, C<ev::idle>, C<ev::sig> etc.
3237		4151
3238	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of	4152	For each C<ev_TYPE> watcher in F<ev.h> there is a corresponding class of
3239	the same name in the C<ev> namespace, with the exception of C<ev_signal>	4153	the same name in the C<ev> namespace, with the exception of C<ev_signal>
3240	which is called C<ev::sig> to avoid clashes with the C<signal> macro	4154	which is called C<ev::sig> to avoid clashes with the C<signal> macro
3241	defines by many implementations.	4155	defined by many implementations.
3242		4156
3243	All of those classes have these methods:	4157	All of those classes have these methods:
3244		4158
3245	=over 4	4159	=over 4
3246		4160
3247	=item ev::TYPE::TYPE ()	4161	=item ev::TYPE::TYPE ()
3248		4162
3249	=item ev::TYPE::TYPE (struct ev_loop *)	4163	=item ev::TYPE::TYPE (loop)
3250		4164
3251	=item ev::TYPE::~TYPE	4165	=item ev::TYPE::~TYPE
3252		4166
3253	The constructor (optionally) takes an event loop to associate the watcher	4167	The constructor (optionally) takes an event loop to associate the watcher
3254	with. If it is omitted, it will use C<EV_DEFAULT>.	4168	with. If it is omitted, it will use C<EV_DEFAULT>.
…		…
3287	myclass obj;	4201	myclass obj;
3288	ev::io iow;	4202	ev::io iow;
3289	iow.set <myclass, &myclass::io_cb> (&obj);	4203	iow.set <myclass, &myclass::io_cb> (&obj);
3290		4204
3291	=item w->set (object *)	4205	=item w->set (object *)
3292
3293	This is an B<experimental> feature that might go away in a future version.
3294		4206
3295	This is a variation of a method callback - leaving out the method to call	4207	This is a variation of a method callback - leaving out the method to call
3296	will default the method to C<operator ()>, which makes it possible to use	4208	will default the method to C<operator ()>, which makes it possible to use
3297	functor objects without having to manually specify the C<operator ()> all	4209	functor objects without having to manually specify the C<operator ()> all
3298	the time. Incidentally, you can then also leave out the template argument	4210	the time. Incidentally, you can then also leave out the template argument
…		…
3310	void operator() (ev::io &w, int revents)	4222	void operator() (ev::io &w, int revents)
3311	{	4223	{
3312	...	4224	...
3313	}	4225	}
3314	}	4226	}
3315		4227
3316	myfunctor f;	4228	myfunctor f;
3317		4229
3318	ev::io w;	4230	ev::io w;
3319	w.set (&f);	4231	w.set (&f);
3320		4232
…		…
3331	Example: Use a plain function as callback.	4243	Example: Use a plain function as callback.
3332		4244
3333	static void io_cb (ev::io &w, int revents) { }	4245	static void io_cb (ev::io &w, int revents) { }
3334	iow.set <io_cb> ();	4246	iow.set <io_cb> ();
3335		4247
3336	=item w->set (struct ev_loop *)	4248	=item w->set (loop)
3337		4249
3338	Associates a different C<struct ev_loop> with this watcher. You can only	4250	Associates a different C<struct ev_loop> with this watcher. You can only
3339	do this when the watcher is inactive (and not pending either).	4251	do this when the watcher is inactive (and not pending either).
3340		4252
3341	=item w->set ([arguments])	4253	=item w->set ([arguments])
3342		4254
3343	Basically the same as C<ev_TYPE_set>, with the same arguments. Must be	4255	Basically the same as C<ev_TYPE_set> (except for C<ev::embed> watchers>),
		4256	with the same arguments. Either this method or a suitable start method
3344	called at least once. Unlike the C counterpart, an active watcher gets	4257	must be called at least once. Unlike the C counterpart, an active watcher
3345	automatically stopped and restarted when reconfiguring it with this	4258	gets automatically stopped and restarted when reconfiguring it with this
3346	method.	4259	method.
		4260
		4261	For C<ev::embed> watchers this method is called C<set_embed>, to avoid
		4262	clashing with the C<set (loop)> method.
3347		4263
3348	=item w->start ()	4264	=item w->start ()
3349		4265
3350	Starts the watcher. Note that there is no C<loop> argument, as the	4266	Starts the watcher. Note that there is no C<loop> argument, as the
3351	constructor already stores the event loop.	4267	constructor already stores the event loop.
3352		4268
		4269	=item w->start ([arguments])
		4270
		4271	Instead of calling C<set> and C<start> methods separately, it is often
		4272	convenient to wrap them in one call. Uses the same type of arguments as
		4273	the configure C<set> method of the watcher.
		4274
3353	=item w->stop ()	4275	=item w->stop ()
3354		4276
3355	Stops the watcher if it is active. Again, no C<loop> argument.	4277	Stops the watcher if it is active. Again, no C<loop> argument.
3356		4278
3357	=item w->again () (C<ev::timer>, C<ev::periodic> only)	4279	=item w->again () (C<ev::timer>, C<ev::periodic> only)
…		…
3369		4291
3370	=back	4292	=back
3371		4293
3372	=back	4294	=back
3373		4295
3374	Example: Define a class with an IO and idle watcher, start one of them in	4296	Example: Define a class with two I/O and idle watchers, start the I/O
3375	the constructor.	4297	watchers in the constructor.
3376		4298
3377	class myclass	4299	class myclass
3378	{	4300	{
3379	ev::io io ; void io_cb (ev::io &w, int revents);	4301	ev::io io ; void io_cb (ev::io &w, int revents);
		4302	ev::io io2 ; void io2_cb (ev::io &w, int revents);
3380	ev::idle idle; void idle_cb (ev::idle &w, int revents);	4303	ev::idle idle; void idle_cb (ev::idle &w, int revents);
3381		4304
3382	myclass (int fd)	4305	myclass (int fd)
3383	{	4306	{
3384	io .set <myclass, &myclass::io_cb > (this);	4307	io .set <myclass, &myclass::io_cb > (this);
		4308	io2 .set <myclass, &myclass::io2_cb > (this);
3385	idle.set <myclass, &myclass::idle_cb> (this);	4309	idle.set <myclass, &myclass::idle_cb> (this);
3386		4310
3387	io.start (fd, ev::READ);	4311	io.set (fd, ev::WRITE); // configure the watcher
		4312	io.start (); // start it whenever convenient
		4313
		4314	io2.start (fd, ev::READ); // set + start in one call
3388	}	4315	}
3389	};	4316	};
3390		4317
3391		4318
3392	=head1 OTHER LANGUAGE BINDINGS	4319	=head1 OTHER LANGUAGE BINDINGS
…		…
3431	L<http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hlibev>.	4358	L<http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hlibev>.
3432		4359
3433	=item D	4360	=item D
3434		4361
3435	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to	4362	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
3436	be found at L<http://proj.llucax.com.ar/wiki/evd>.	4363	be found at L<http://www.llucax.com.ar/proj/ev.d/index.html>.
3437		4364
3438	=item Ocaml	4365	=item Ocaml
3439		4366
3440	Erkki Seppala has written Ocaml bindings for libev, to be found at	4367	Erkki Seppala has written Ocaml bindings for libev, to be found at
3441	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.	4368	L<http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.
3442		4369
3443	=item Lua	4370	=item Lua
3444		4371
3445	Brian Maher has written a partial interface to libev	4372	Brian Maher has written a partial interface to libev for lua (at the
3446	for lua (only C<ev_io> and C<ev_timer>), to be found at	4373	time of this writing, only C<ev_io> and C<ev_timer>), to be found at
3447	L<http://github.com/brimworks/lua-ev>.	4374	L<http://github.com/brimworks/lua-ev>.
		4375
		4376	=item Javascript
		4377
		4378	Node.js (L<http://nodejs.org>) uses libev as the underlying event library.
		4379
		4380	=item Others
		4381
		4382	There are others, and I stopped counting.
3448		4383
3449	=back	4384	=back
3450		4385
3451		4386
3452	=head1 MACRO MAGIC	4387	=head1 MACRO MAGIC
…		…
3466	loop argument"). The C<EV_A> form is used when this is the sole argument,	4401	loop argument"). The C<EV_A> form is used when this is the sole argument,
3467	C<EV_A_> is used when other arguments are following. Example:	4402	C<EV_A_> is used when other arguments are following. Example:
3468		4403
3469	ev_unref (EV_A);	4404	ev_unref (EV_A);
3470	ev_timer_add (EV_A_ watcher);	4405	ev_timer_add (EV_A_ watcher);
3471	ev_loop (EV_A_ 0);	4406	ev_run (EV_A_ 0);
3472		4407
3473	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,	4408	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
3474	which is often provided by the following macro.	4409	which is often provided by the following macro.
3475		4410
3476	=item C<EV_P>, C<EV_P_>	4411	=item C<EV_P>, C<EV_P_>
…		…
3489	suitable for use with C<EV_A>.	4424	suitable for use with C<EV_A>.
3490		4425
3491	=item C<EV_DEFAULT>, C<EV_DEFAULT_>	4426	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
3492		4427
3493	Similar to the other two macros, this gives you the value of the default	4428	Similar to the other two macros, this gives you the value of the default
3494	loop, if multiple loops are supported ("ev loop default").	4429	loop, if multiple loops are supported ("ev loop default"). The default loop
		4430	will be initialised if it isn't already initialised.
		4431
		4432	For non-multiplicity builds, these macros do nothing, so you always have
		4433	to initialise the loop somewhere.
3495		4434
3496	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>	4435	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
3497		4436
3498	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the	4437	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
3499	default loop has been initialised (C<UC> == unchecked). Their behaviour	4438	default loop has been initialised (C<UC> == unchecked). Their behaviour
…		…
3516	}	4455	}
3517		4456
3518	ev_check check;	4457	ev_check check;
3519	ev_check_init (&check, check_cb);	4458	ev_check_init (&check, check_cb);
3520	ev_check_start (EV_DEFAULT_ &check);	4459	ev_check_start (EV_DEFAULT_ &check);
3521	ev_loop (EV_DEFAULT_ 0);	4460	ev_run (EV_DEFAULT_ 0);
3522		4461
3523	=head1 EMBEDDING	4462	=head1 EMBEDDING
3524		4463
3525	Libev can (and often is) directly embedded into host	4464	Libev can (and often is) directly embedded into host
3526	applications. Examples of applications that embed it include the Deliantra	4465	applications. Examples of applications that embed it include the Deliantra
…		…
3566	ev_vars.h	4505	ev_vars.h
3567	ev_wrap.h	4506	ev_wrap.h
3568		4507
3569	ev_win32.c required on win32 platforms only	4508	ev_win32.c required on win32 platforms only
3570		4509
3571	ev_select.c only when select backend is enabled (which is enabled by default)	4510	ev_select.c only when select backend is enabled
3572	ev_poll.c only when poll backend is enabled (disabled by default)	4511	ev_poll.c only when poll backend is enabled
3573	ev_epoll.c only when the epoll backend is enabled (disabled by default)	4512	ev_epoll.c only when the epoll backend is enabled
		4513	ev_linuxaio.c only when the linux aio backend is enabled
		4514	ev_iouring.c only when the linux io_uring backend is enabled
3574	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)	4515	ev_kqueue.c only when the kqueue backend is enabled
3575	ev_port.c only when the solaris port backend is enabled (disabled by default)	4516	ev_port.c only when the solaris port backend is enabled
3576		4517
3577	F<ev.c> includes the backend files directly when enabled, so you only need	4518	F<ev.c> includes the backend files directly when enabled, so you only need
3578	to compile this single file.	4519	to compile this single file.
3579		4520
3580	=head3 LIBEVENT COMPATIBILITY API	4521	=head3 LIBEVENT COMPATIBILITY API
…		…
3606	libev.m4	4547	libev.m4
3607		4548
3608	=head2 PREPROCESSOR SYMBOLS/MACROS	4549	=head2 PREPROCESSOR SYMBOLS/MACROS
3609		4550
3610	Libev can be configured via a variety of preprocessor symbols you have to	4551	Libev can be configured via a variety of preprocessor symbols you have to
3611	define before including any of its files. The default in the absence of	4552	define before including (or compiling) any of its files. The default in
3612	autoconf is documented for every option.	4553	the absence of autoconf is documented for every option.
		4554
		4555	Symbols marked with "(h)" do not change the ABI, and can have different
		4556	values when compiling libev vs. including F<ev.h>, so it is permissible
		4557	to redefine them before including F<ev.h> without breaking compatibility
		4558	to a compiled library. All other symbols change the ABI, which means all
		4559	users of libev and the libev code itself must be compiled with compatible
		4560	settings.
3613		4561
3614	=over 4	4562	=over 4
3615		4563
		4564	=item EV_COMPAT3 (h)
		4565
		4566	Backwards compatibility is a major concern for libev. This is why this
		4567	release of libev comes with wrappers for the functions and symbols that
		4568	have been renamed between libev version 3 and 4.
		4569
		4570	You can disable these wrappers (to test compatibility with future
		4571	versions) by defining C<EV_COMPAT3> to C<0> when compiling your
		4572	sources. This has the additional advantage that you can drop the C<struct>
		4573	from C<struct ev_loop> declarations, as libev will provide an C<ev_loop>
		4574	typedef in that case.
		4575
		4576	In some future version, the default for C<EV_COMPAT3> will become C<0>,
		4577	and in some even more future version the compatibility code will be
		4578	removed completely.
		4579
3616	=item EV_STANDALONE	4580	=item EV_STANDALONE (h)
3617		4581
3618	Must always be C<1> if you do not use autoconf configuration, which	4582	Must always be C<1> if you do not use autoconf configuration, which
3619	keeps libev from including F<config.h>, and it also defines dummy	4583	keeps libev from including F<config.h>, and it also defines dummy
3620	implementations for some libevent functions (such as logging, which is not	4584	implementations for some libevent functions (such as logging, which is not
3621	supported). It will also not define any of the structs usually found in	4585	supported). It will also not define any of the structs usually found in
3622	F<event.h> that are not directly supported by the libev core alone.	4586	F<event.h> that are not directly supported by the libev core alone.
3623		4587
3624	In standalone mode, libev will still try to automatically deduce the	4588	In standalone mode, libev will still try to automatically deduce the
3625	configuration, but has to be more conservative.	4589	configuration, but has to be more conservative.
		4590
		4591	=item EV_USE_FLOOR
		4592
		4593	If defined to be C<1>, libev will use the C<floor ()> function for its
		4594	periodic reschedule calculations, otherwise libev will fall back on a
		4595	portable (slower) implementation. If you enable this, you usually have to
		4596	link against libm or something equivalent. Enabling this when the C<floor>
		4597	function is not available will fail, so the safe default is to not enable
		4598	this.
3626		4599
3627	=item EV_USE_MONOTONIC	4600	=item EV_USE_MONOTONIC
3628		4601
3629	If defined to be C<1>, libev will try to detect the availability of the	4602	If defined to be C<1>, libev will try to detect the availability of the
3630	monotonic clock option at both compile time and runtime. Otherwise no	4603	monotonic clock option at both compile time and runtime. Otherwise no
…		…
3667	available and will probe for kernel support at runtime. This will improve	4640	available and will probe for kernel support at runtime. This will improve
3668	C<ev_signal> and C<ev_async> performance and reduce resource consumption.	4641	C<ev_signal> and C<ev_async> performance and reduce resource consumption.
3669	If undefined, it will be enabled if the headers indicate GNU/Linux + Glibc	4642	If undefined, it will be enabled if the headers indicate GNU/Linux + Glibc
3670	2.7 or newer, otherwise disabled.	4643	2.7 or newer, otherwise disabled.
3671		4644
		4645	=item EV_USE_SIGNALFD
		4646
		4647	If defined to be C<1>, then libev will assume that C<signalfd ()> is
		4648	available and will probe for kernel support at runtime. This enables
		4649	the use of EVFLAG_SIGNALFD for faster and simpler signal handling. If
		4650	undefined, it will be enabled if the headers indicate GNU/Linux + Glibc
		4651	2.7 or newer, otherwise disabled.
		4652
		4653	=item EV_USE_TIMERFD
		4654
		4655	If defined to be C<1>, then libev will assume that C<timerfd ()> is
		4656	available and will probe for kernel support at runtime. This allows
		4657	libev to detect time jumps accurately. If undefined, it will be enabled
		4658	if the headers indicate GNU/Linux + Glibc 2.8 or newer and define
		4659	C<TFD_TIMER_CANCEL_ON_SET>, otherwise disabled.
		4660
		4661	=item EV_USE_EVENTFD
		4662
		4663	If defined to be C<1>, then libev will assume that C<eventfd ()> is
		4664	available and will probe for kernel support at runtime. This will improve
		4665	C<ev_signal> and C<ev_async> performance and reduce resource consumption.
		4666	If undefined, it will be enabled if the headers indicate GNU/Linux + Glibc
		4667	2.7 or newer, otherwise disabled.
		4668
3672	=item EV_USE_SELECT	4669	=item EV_USE_SELECT
3673		4670
3674	If undefined or defined to be C<1>, libev will compile in support for the	4671	If undefined or defined to be C<1>, libev will compile in support for the
3675	C<select>(2) backend. No attempt at auto-detection will be done: if no	4672	C<select>(2) backend. No attempt at auto-detection will be done: if no
3676	other method takes over, select will be it. Otherwise the select backend	4673	other method takes over, select will be it. Otherwise the select backend
…		…
3716	If programs implement their own fd to handle mapping on win32, then this	4713	If programs implement their own fd to handle mapping on win32, then this
3717	macro can be used to override the C<close> function, useful to unregister	4714	macro can be used to override the C<close> function, useful to unregister
3718	file descriptors again. Note that the replacement function has to close	4715	file descriptors again. Note that the replacement function has to close
3719	the underlying OS handle.	4716	the underlying OS handle.
3720		4717
		4718	=item EV_USE_WSASOCKET
		4719
		4720	If defined to be C<1>, libev will use C<WSASocket> to create its internal
		4721	communication socket, which works better in some environments. Otherwise,
		4722	the normal C<socket> function will be used, which works better in other
		4723	environments.
		4724
3721	=item EV_USE_POLL	4725	=item EV_USE_POLL
3722		4726
3723	If defined to be C<1>, libev will compile in support for the C<poll>(2)	4727	If defined to be C<1>, libev will compile in support for the C<poll>(2)
3724	backend. Otherwise it will be enabled on non-win32 platforms. It	4728	backend. Otherwise it will be enabled on non-win32 platforms. It
3725	takes precedence over select.	4729	takes precedence over select.
…		…
3729	If defined to be C<1>, libev will compile in support for the Linux	4733	If defined to be C<1>, libev will compile in support for the Linux
3730	C<epoll>(7) backend. Its availability will be detected at runtime,	4734	C<epoll>(7) backend. Its availability will be detected at runtime,
3731	otherwise another method will be used as fallback. This is the preferred	4735	otherwise another method will be used as fallback. This is the preferred
3732	backend for GNU/Linux systems. If undefined, it will be enabled if the	4736	backend for GNU/Linux systems. If undefined, it will be enabled if the
3733	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.	4737	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
		4738
		4739	=item EV_USE_LINUXAIO
		4740
		4741	If defined to be C<1>, libev will compile in support for the Linux aio
		4742	backend (C<EV_USE_EPOLL> must also be enabled). If undefined, it will be
		4743	enabled on linux, otherwise disabled.
		4744
		4745	=item EV_USE_IOURING
		4746
		4747	If defined to be C<1>, libev will compile in support for the Linux
		4748	io_uring backend (C<EV_USE_EPOLL> must also be enabled). Due to it's
		4749	current limitations it has to be requested explicitly. If undefined, it
		4750	will be enabled on linux, otherwise disabled.
3734		4751
3735	=item EV_USE_KQUEUE	4752	=item EV_USE_KQUEUE
3736		4753
3737	If defined to be C<1>, libev will compile in support for the BSD style	4754	If defined to be C<1>, libev will compile in support for the BSD style
3738	C<kqueue>(2) backend. Its actual availability will be detected at runtime,	4755	C<kqueue>(2) backend. Its actual availability will be detected at runtime,
…		…
3760	If defined to be C<1>, libev will compile in support for the Linux inotify	4777	If defined to be C<1>, libev will compile in support for the Linux inotify
3761	interface to speed up C<ev_stat> watchers. Its actual availability will	4778	interface to speed up C<ev_stat> watchers. Its actual availability will
3762	be detected at runtime. If undefined, it will be enabled if the headers	4779	be detected at runtime. If undefined, it will be enabled if the headers
3763	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.	4780	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
3764		4781
		4782	=item EV_NO_SMP
		4783
		4784	If defined to be C<1>, libev will assume that memory is always coherent
		4785	between threads, that is, threads can be used, but threads never run on
		4786	different cpus (or different cpu cores). This reduces dependencies
		4787	and makes libev faster.
		4788
		4789	=item EV_NO_THREADS
		4790
		4791	If defined to be C<1>, libev will assume that it will never be called from
		4792	different threads (that includes signal handlers), which is a stronger
		4793	assumption than C<EV_NO_SMP>, above. This reduces dependencies and makes
		4794	libev faster.
		4795
3765	=item EV_ATOMIC_T	4796	=item EV_ATOMIC_T
3766		4797
3767	Libev requires an integer type (suitable for storing C<0> or C<1>) whose	4798	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
3768	access is atomic with respect to other threads or signal contexts. No such	4799	access is atomic with respect to other threads or signal contexts. No
3769	type is easily found in the C language, so you can provide your own type	4800	such type is easily found in the C language, so you can provide your own
3770	that you know is safe for your purposes. It is used both for signal handler "locking"	4801	type that you know is safe for your purposes. It is used both for signal
3771	as well as for signal and thread safety in C<ev_async> watchers.	4802	handler "locking" as well as for signal and thread safety in C<ev_async>
		4803	watchers.
3772		4804
3773	In the absence of this define, libev will use C<sig_atomic_t volatile>	4805	In the absence of this define, libev will use C<sig_atomic_t volatile>
3774	(from F<signal.h>), which is usually good enough on most platforms.	4806	(from F<signal.h>), which is usually good enough on most platforms.
3775		4807
3776	=item EV_H	4808	=item EV_H (h)
3777		4809
3778	The name of the F<ev.h> header file used to include it. The default if	4810	The name of the F<ev.h> header file used to include it. The default if
3779	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be	4811	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
3780	used to virtually rename the F<ev.h> header file in case of conflicts.	4812	used to virtually rename the F<ev.h> header file in case of conflicts.
3781		4813
3782	=item EV_CONFIG_H	4814	=item EV_CONFIG_H (h)
3783		4815
3784	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	4816	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
3785	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	4817	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
3786	C<EV_H>, above.	4818	C<EV_H>, above.
3787		4819
3788	=item EV_EVENT_H	4820	=item EV_EVENT_H (h)
3789		4821
3790	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	4822	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
3791	of how the F<event.h> header can be found, the default is C<"event.h">.	4823	of how the F<event.h> header can be found, the default is C<"event.h">.
3792		4824
3793	=item EV_PROTOTYPES	4825	=item EV_PROTOTYPES (h)
3794		4826
3795	If defined to be C<0>, then F<ev.h> will not define any function	4827	If defined to be C<0>, then F<ev.h> will not define any function
3796	prototypes, but still define all the structs and other symbols. This is	4828	prototypes, but still define all the structs and other symbols. This is
3797	occasionally useful if you want to provide your own wrapper functions	4829	occasionally useful if you want to provide your own wrapper functions
3798	around libev functions.	4830	around libev functions.
…		…
3803	will have the C<struct ev_loop *> as first argument, and you can create	4835	will have the C<struct ev_loop *> as first argument, and you can create
3804	additional independent event loops. Otherwise there will be no support	4836	additional independent event loops. Otherwise there will be no support
3805	for multiple event loops and there is no first event loop pointer	4837	for multiple event loops and there is no first event loop pointer
3806	argument. Instead, all functions act on the single default loop.	4838	argument. Instead, all functions act on the single default loop.
3807		4839
		4840	Note that C<EV_DEFAULT> and C<EV_DEFAULT_> will no longer provide a
		4841	default loop when multiplicity is switched off - you always have to
		4842	initialise the loop manually in this case.
		4843
3808	=item EV_MINPRI	4844	=item EV_MINPRI
3809		4845
3810	=item EV_MAXPRI	4846	=item EV_MAXPRI
3811		4847
3812	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to	4848	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to
…		…
3820	fine.	4856	fine.
3821		4857
3822	If your embedding application does not need any priorities, defining these	4858	If your embedding application does not need any priorities, defining these
3823	both to C<0> will save some memory and CPU.	4859	both to C<0> will save some memory and CPU.
3824		4860
3825	=item EV_PERIODIC_ENABLE	4861	=item EV_PERIODIC_ENABLE, EV_IDLE_ENABLE, EV_EMBED_ENABLE, EV_STAT_ENABLE,
		4862	EV_PREPARE_ENABLE, EV_CHECK_ENABLE, EV_FORK_ENABLE, EV_SIGNAL_ENABLE,
		4863	EV_ASYNC_ENABLE, EV_CHILD_ENABLE.
3826		4864
3827	If undefined or defined to be C<1>, then periodic timers are supported. If	4865	If undefined or defined to be C<1> (and the platform supports it), then
3828	defined to be C<0>, then they are not. Disabling them saves a few kB of	4866	the respective watcher type is supported. If defined to be C<0>, then it
3829	code.	4867	is not. Disabling watcher types mainly saves code size.
3830		4868
3831	=item EV_IDLE_ENABLE	4869	=item EV_FEATURES
3832
3833	If undefined or defined to be C<1>, then idle watchers are supported. If
3834	defined to be C<0>, then they are not. Disabling them saves a few kB of
3835	code.
3836
3837	=item EV_EMBED_ENABLE
3838
3839	If undefined or defined to be C<1>, then embed watchers are supported. If
3840	defined to be C<0>, then they are not. Embed watchers rely on most other
3841	watcher types, which therefore must not be disabled.
3842
3843	=item EV_STAT_ENABLE
3844
3845	If undefined or defined to be C<1>, then stat watchers are supported. If
3846	defined to be C<0>, then they are not.
3847
3848	=item EV_FORK_ENABLE
3849
3850	If undefined or defined to be C<1>, then fork watchers are supported. If
3851	defined to be C<0>, then they are not.
3852
3853	=item EV_ASYNC_ENABLE
3854
3855	If undefined or defined to be C<1>, then async watchers are supported. If
3856	defined to be C<0>, then they are not.
3857
3858	=item EV_MINIMAL
3859		4870
3860	If you need to shave off some kilobytes of code at the expense of some	4871	If you need to shave off some kilobytes of code at the expense of some
3861	speed (but with the full API), define this symbol to C<1>. Currently this	4872	speed (but with the full API), you can define this symbol to request
3862	is used to override some inlining decisions, saves roughly 30% code size	4873	certain subsets of functionality. The default is to enable all features
3863	on amd64. It also selects a much smaller 2-heap for timer management over	4874	that can be enabled on the platform.
3864	the default 4-heap.
3865		4875
3866	You can save even more by disabling watcher types you do not need	4876	A typical way to use this symbol is to define it to C<0> (or to a bitset
3867	and setting C<EV_MAXPRI> == C<EV_MINPRI>. Also, disabling C<assert>	4877	with some broad features you want) and then selectively re-enable
3868	(C<-DNDEBUG>) will usually reduce code size a lot.	4878	additional parts you want, for example if you want everything minimal,
		4879	but multiple event loop support, async and child watchers and the poll
		4880	backend, use this:
3869		4881
3870	Defining C<EV_MINIMAL> to C<2> will additionally reduce the core API to	4882	#define EV_FEATURES 0
3871	provide a bare-bones event library. See C<ev.h> for details on what parts	4883	#define EV_MULTIPLICITY 1
3872	of the API are still available, and do not complain if this subset changes	4884	#define EV_USE_POLL 1
3873	over time.	4885	#define EV_CHILD_ENABLE 1
		4886	#define EV_ASYNC_ENABLE 1
		4887
		4888	The actual value is a bitset, it can be a combination of the following
		4889	values (by default, all of these are enabled):
		4890
		4891	=over 4
		4892
		4893	=item C<1> - faster/larger code
		4894
		4895	Use larger code to speed up some operations.
		4896
		4897	Currently this is used to override some inlining decisions (enlarging the
		4898	code size by roughly 30% on amd64).
		4899
		4900	When optimising for size, use of compiler flags such as C<-Os> with
		4901	gcc is recommended, as well as C<-DNDEBUG>, as libev contains a number of
		4902	assertions.
		4903
		4904	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4905	(e.g. gcc with C<-Os>).
		4906
		4907	=item C<2> - faster/larger data structures
		4908
		4909	Replaces the small 2-heap for timer management by a faster 4-heap, larger
		4910	hash table sizes and so on. This will usually further increase code size
		4911	and can additionally have an effect on the size of data structures at
		4912	runtime.
		4913
		4914	The default is off when C<__OPTIMIZE_SIZE__> is defined by your compiler
		4915	(e.g. gcc with C<-Os>).
		4916
		4917	=item C<4> - full API configuration
		4918
		4919	This enables priorities (sets C<EV_MAXPRI>=2 and C<EV_MINPRI>=-2), and
		4920	enables multiplicity (C<EV_MULTIPLICITY>=1).
		4921
		4922	=item C<8> - full API
		4923
		4924	This enables a lot of the "lesser used" API functions. See C<ev.h> for
		4925	details on which parts of the API are still available without this
		4926	feature, and do not complain if this subset changes over time.
		4927
		4928	=item C<16> - enable all optional watcher types
		4929
		4930	Enables all optional watcher types. If you want to selectively enable
		4931	only some watcher types other than I/O and timers (e.g. prepare,
		4932	embed, async, child...) you can enable them manually by defining
		4933	C<EV_watchertype_ENABLE> to C<1> instead.
		4934
		4935	=item C<32> - enable all backends
		4936
		4937	This enables all backends - without this feature, you need to enable at
		4938	least one backend manually (C<EV_USE_SELECT> is a good choice).
		4939
		4940	=item C<64> - enable OS-specific "helper" APIs
		4941
		4942	Enable inotify, eventfd, signalfd and similar OS-specific helper APIs by
		4943	default.
		4944
		4945	=back
		4946
		4947	Compiling with C<gcc -Os -DEV_STANDALONE -DEV_USE_EPOLL=1 -DEV_FEATURES=0>
		4948	reduces the compiled size of libev from 24.7Kb code/2.8Kb data to 6.5Kb
		4949	code/0.3Kb data on my GNU/Linux amd64 system, while still giving you I/O
		4950	watchers, timers and monotonic clock support.
		4951
		4952	With an intelligent-enough linker (gcc+binutils are intelligent enough
		4953	when you use C<-Wl,--gc-sections -ffunction-sections>) functions unused by
		4954	your program might be left out as well - a binary starting a timer and an
		4955	I/O watcher then might come out at only 5Kb.
		4956
		4957	=item EV_API_STATIC
		4958
		4959	If this symbol is defined (by default it is not), then all identifiers
		4960	will have static linkage. This means that libev will not export any
		4961	identifiers, and you cannot link against libev anymore. This can be useful
		4962	when you embed libev, only want to use libev functions in a single file,
		4963	and do not want its identifiers to be visible.
		4964
		4965	To use this, define C<EV_API_STATIC> and include F<ev.c> in the file that
		4966	wants to use libev.
		4967
		4968	This option only works when libev is compiled with a C compiler, as C++
		4969	doesn't support the required declaration syntax.
		4970
		4971	=item EV_AVOID_STDIO
		4972
		4973	If this is set to C<1> at compiletime, then libev will avoid using stdio
		4974	functions (printf, scanf, perror etc.). This will increase the code size
		4975	somewhat, but if your program doesn't otherwise depend on stdio and your
		4976	libc allows it, this avoids linking in the stdio library which is quite
		4977	big.
		4978
		4979	Note that error messages might become less precise when this option is
		4980	enabled.
3874		4981
3875	=item EV_NSIG	4982	=item EV_NSIG
3876		4983
3877	The highest supported signal number, +1 (or, the number of	4984	The highest supported signal number, +1 (or, the number of
3878	signals): Normally, libev tries to deduce the maximum number of signals	4985	signals): Normally, libev tries to deduce the maximum number of signals
3879	automatically, but sometimes this fails, in which case it can be	4986	automatically, but sometimes this fails, in which case it can be
3880	specified. Also, using a lower number than detected (C<32> should be	4987	specified. Also, using a lower number than detected (C<32> should be
3881	good for about any system in existance) can save some memory, as libev	4988	good for about any system in existence) can save some memory, as libev
3882	statically allocates some 12-24 bytes per signal number.	4989	statically allocates some 12-24 bytes per signal number.
3883		4990
3884	=item EV_PID_HASHSIZE	4991	=item EV_PID_HASHSIZE
3885		4992
3886	C<ev_child> watchers use a small hash table to distribute workload by	4993	C<ev_child> watchers use a small hash table to distribute workload by
3887	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	4994	pid. The default size is C<16> (or C<1> with C<EV_FEATURES> disabled),
3888	than enough. If you need to manage thousands of children you might want to	4995	usually more than enough. If you need to manage thousands of children you
3889	increase this value (I<must> be a power of two).	4996	might want to increase this value (I<must> be a power of two).
3890		4997
3891	=item EV_INOTIFY_HASHSIZE	4998	=item EV_INOTIFY_HASHSIZE
3892		4999
3893	C<ev_stat> watchers use a small hash table to distribute workload by	5000	C<ev_stat> watchers use a small hash table to distribute workload by
3894	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	5001	inotify watch id. The default size is C<16> (or C<1> with C<EV_FEATURES>
3895	usually more than enough. If you need to manage thousands of C<ev_stat>	5002	disabled), usually more than enough. If you need to manage thousands of
3896	watchers you might want to increase this value (I<must> be a power of	5003	C<ev_stat> watchers you might want to increase this value (I<must> be a
3897	two).	5004	power of two).
3898		5005
3899	=item EV_USE_4HEAP	5006	=item EV_USE_4HEAP
3900		5007
3901	Heaps are not very cache-efficient. To improve the cache-efficiency of the	5008	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3902	timer and periodics heaps, libev uses a 4-heap when this symbol is defined	5009	timer and periodics heaps, libev uses a 4-heap when this symbol is defined
3903	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably	5010	to C<1>. The 4-heap uses more complicated (longer) code but has noticeably
3904	faster performance with many (thousands) of watchers.	5011	faster performance with many (thousands) of watchers.
3905		5012
3906	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	5013	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3907	(disabled).	5014	will be C<0>.
3908		5015
3909	=item EV_HEAP_CACHE_AT	5016	=item EV_HEAP_CACHE_AT
3910		5017
3911	Heaps are not very cache-efficient. To improve the cache-efficiency of the	5018	Heaps are not very cache-efficient. To improve the cache-efficiency of the
3912	timer and periodics heaps, libev can cache the timestamp (I<at>) within	5019	timer and periodics heaps, libev can cache the timestamp (I<at>) within
3913	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),	5020	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
3914	which uses 8-12 bytes more per watcher and a few hundred bytes more code,	5021	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
3915	but avoids random read accesses on heap changes. This improves performance	5022	but avoids random read accesses on heap changes. This improves performance
3916	noticeably with many (hundreds) of watchers.	5023	noticeably with many (hundreds) of watchers.
3917		5024
3918	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>	5025	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3919	(disabled).	5026	will be C<0>.
3920		5027
3921	=item EV_VERIFY	5028	=item EV_VERIFY
3922		5029
3923	Controls how much internal verification (see C<ev_loop_verify ()>) will	5030	Controls how much internal verification (see C<ev_verify ()>) will
3924	be done: If set to C<0>, no internal verification code will be compiled	5031	be done: If set to C<0>, no internal verification code will be compiled
3925	in. If set to C<1>, then verification code will be compiled in, but not	5032	in. If set to C<1>, then verification code will be compiled in, but not
3926	called. If set to C<2>, then the internal verification code will be	5033	called. If set to C<2>, then the internal verification code will be
3927	called once per loop, which can slow down libev. If set to C<3>, then the	5034	called once per loop, which can slow down libev. If set to C<3>, then the
3928	verification code will be called very frequently, which will slow down	5035	verification code will be called very frequently, which will slow down
3929	libev considerably.	5036	libev considerably.
3930		5037
		5038	Verification errors are reported via C's C<assert> mechanism, so if you
		5039	disable that (e.g. by defining C<NDEBUG>) then no errors will be reported.
		5040
3931	The default is C<1>, unless C<EV_MINIMAL> is set, in which case it will be	5041	The default is C<1>, unless C<EV_FEATURES> overrides it, in which case it
3932	C<0>.	5042	will be C<0>.
3933		5043
3934	=item EV_COMMON	5044	=item EV_COMMON
3935		5045
3936	By default, all watchers have a C<void *data> member. By redefining	5046	By default, all watchers have a C<void *data> member. By redefining
3937	this macro to a something else you can include more and other types of	5047	this macro to something else you can include more and other types of
3938	members. You have to define it each time you include one of the files,	5048	members. You have to define it each time you include one of the files,
3939	though, and it must be identical each time.	5049	though, and it must be identical each time.
3940		5050
3941	For example, the perl EV module uses something like this:	5051	For example, the perl EV module uses something like this:
3942		5052
…		…
3995	file.	5105	file.
3996		5106
3997	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	5107	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
3998	that everybody includes and which overrides some configure choices:	5108	that everybody includes and which overrides some configure choices:
3999		5109
4000	#define EV_MINIMAL 1	5110	#define EV_FEATURES 8
4001	#define EV_USE_POLL 0	5111	#define EV_USE_SELECT 1
4002	#define EV_MULTIPLICITY 0
4003	#define EV_PERIODIC_ENABLE 0	5112	#define EV_PREPARE_ENABLE 1
		5113	#define EV_IDLE_ENABLE 1
4004	#define EV_STAT_ENABLE 0	5114	#define EV_SIGNAL_ENABLE 1
4005	#define EV_FORK_ENABLE 0	5115	#define EV_CHILD_ENABLE 1
		5116	#define EV_USE_STDEXCEPT 0
4006	#define EV_CONFIG_H <config.h>	5117	#define EV_CONFIG_H <config.h>
4007	#define EV_MINPRI 0
4008	#define EV_MAXPRI 0
4009		5118
4010	#include "ev++.h"	5119	#include "ev++.h"
4011		5120
4012	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	5121	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
4013		5122
4014	#include "ev_cpp.h"	5123	#include "ev_cpp.h"
4015	#include "ev.c"	5124	#include "ev.c"
4016		5125
4017	=head1 INTERACTION WITH OTHER PROGRAMS OR LIBRARIES	5126	=head1 INTERACTION WITH OTHER PROGRAMS, LIBRARIES OR THE ENVIRONMENT
4018		5127
4019	=head2 THREADS AND COROUTINES	5128	=head2 THREADS AND COROUTINES
4020		5129
4021	=head3 THREADS	5130	=head3 THREADS
4022		5131
…		…
4073	default loop and triggering an C<ev_async> watcher from the default loop	5182	default loop and triggering an C<ev_async> watcher from the default loop
4074	watcher callback into the event loop interested in the signal.	5183	watcher callback into the event loop interested in the signal.
4075		5184
4076	=back	5185	=back
4077		5186
4078	=head4 THREAD LOCKING EXAMPLE	5187	See also L</THREAD LOCKING EXAMPLE>.
4079
4080	Here is a fictitious example of how to run an event loop in a different
4081	thread than where callbacks are being invoked and watchers are
4082	created/added/removed.
4083
4084	For a real-world example, see the C<EV::Loop::Async> perl module,
4085	which uses exactly this technique (which is suited for many high-level
4086	languages).
4087
4088	The example uses a pthread mutex to protect the loop data, a condition
4089	variable to wait for callback invocations, an async watcher to notify the
4090	event loop thread and an unspecified mechanism to wake up the main thread.
4091
4092	First, you need to associate some data with the event loop:
4093
4094	typedef struct {
4095	mutex_t lock; /* global loop lock */
4096	ev_async async_w;
4097	thread_t tid;
4098	cond_t invoke_cv;
4099	} userdata;
4100
4101	void prepare_loop (EV_P)
4102	{
4103	// for simplicity, we use a static userdata struct.
4104	static userdata u;
4105
4106	ev_async_init (&u->async_w, async_cb);
4107	ev_async_start (EV_A_ &u->async_w);
4108
4109	pthread_mutex_init (&u->lock, 0);
4110	pthread_cond_init (&u->invoke_cv, 0);
4111
4112	// now associate this with the loop
4113	ev_set_userdata (EV_A_ u);
4114	ev_set_invoke_pending_cb (EV_A_ l_invoke);
4115	ev_set_loop_release_cb (EV_A_ l_release, l_acquire);
4116
4117	// then create the thread running ev_loop
4118	pthread_create (&u->tid, 0, l_run, EV_A);
4119	}
4120
4121	The callback for the C<ev_async> watcher does nothing: the watcher is used
4122	solely to wake up the event loop so it takes notice of any new watchers
4123	that might have been added:
4124
4125	static void
4126	async_cb (EV_P_ ev_async *w, int revents)
4127	{
4128	// just used for the side effects
4129	}
4130
4131	The C<l_release> and C<l_acquire> callbacks simply unlock/lock the mutex
4132	protecting the loop data, respectively.
4133
4134	static void
4135	l_release (EV_P)
4136	{
4137	userdata *u = ev_userdata (EV_A);
4138	pthread_mutex_unlock (&u->lock);
4139	}
4140
4141	static void
4142	l_acquire (EV_P)
4143	{
4144	userdata *u = ev_userdata (EV_A);
4145	pthread_mutex_lock (&u->lock);
4146	}
4147
4148	The event loop thread first acquires the mutex, and then jumps straight
4149	into C<ev_loop>:
4150
4151	void *
4152	l_run (void *thr_arg)
4153	{
4154	struct ev_loop *loop = (struct ev_loop *)thr_arg;
4155
4156	l_acquire (EV_A);
4157	pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
4158	ev_loop (EV_A_ 0);
4159	l_release (EV_A);
4160
4161	return 0;
4162	}
4163
4164	Instead of invoking all pending watchers, the C<l_invoke> callback will
4165	signal the main thread via some unspecified mechanism (signals? pipe
4166	writes? C<Async::Interrupt>?) and then waits until all pending watchers
4167	have been called (in a while loop because a) spurious wakeups are possible
4168	and b) skipping inter-thread-communication when there are no pending
4169	watchers is very beneficial):
4170
4171	static void
4172	l_invoke (EV_P)
4173	{
4174	userdata *u = ev_userdata (EV_A);
4175
4176	while (ev_pending_count (EV_A))
4177	{
4178	wake_up_other_thread_in_some_magic_or_not_so_magic_way ();
4179	pthread_cond_wait (&u->invoke_cv, &u->lock);
4180	}
4181	}
4182
4183	Now, whenever the main thread gets told to invoke pending watchers, it
4184	will grab the lock, call C<ev_invoke_pending> and then signal the loop
4185	thread to continue:
4186
4187	static void
4188	real_invoke_pending (EV_P)
4189	{
4190	userdata *u = ev_userdata (EV_A);
4191
4192	pthread_mutex_lock (&u->lock);
4193	ev_invoke_pending (EV_A);
4194	pthread_cond_signal (&u->invoke_cv);
4195	pthread_mutex_unlock (&u->lock);
4196	}
4197
4198	Whenever you want to start/stop a watcher or do other modifications to an
4199	event loop, you will now have to lock:
4200
4201	ev_timer timeout_watcher;
4202	userdata *u = ev_userdata (EV_A);
4203
4204	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
4205
4206	pthread_mutex_lock (&u->lock);
4207	ev_timer_start (EV_A_ &timeout_watcher);
4208	ev_async_send (EV_A_ &u->async_w);
4209	pthread_mutex_unlock (&u->lock);
4210
4211	Note that sending the C<ev_async> watcher is required because otherwise
4212	an event loop currently blocking in the kernel will have no knowledge
4213	about the newly added timer. By waking up the loop it will pick up any new
4214	watchers in the next event loop iteration.
4215		5188
4216	=head3 COROUTINES	5189	=head3 COROUTINES
4217		5190
4218	Libev is very accommodating to coroutines ("cooperative threads"):	5191	Libev is very accommodating to coroutines ("cooperative threads"):
4219	libev fully supports nesting calls to its functions from different	5192	libev fully supports nesting calls to its functions from different
4220	coroutines (e.g. you can call C<ev_loop> on the same loop from two	5193	coroutines (e.g. you can call C<ev_run> on the same loop from two
4221	different coroutines, and switch freely between both coroutines running	5194	different coroutines, and switch freely between both coroutines running
4222	the loop, as long as you don't confuse yourself). The only exception is	5195	the loop, as long as you don't confuse yourself). The only exception is
4223	that you must not do this from C<ev_periodic> reschedule callbacks.	5196	that you must not do this from C<ev_periodic> reschedule callbacks.
4224		5197
4225	Care has been taken to ensure that libev does not keep local state inside	5198	Care has been taken to ensure that libev does not keep local state inside
4226	C<ev_loop>, and other calls do not usually allow for coroutine switches as	5199	C<ev_run>, and other calls do not usually allow for coroutine switches as
4227	they do not call any callbacks.	5200	they do not call any callbacks.
4228		5201
4229	=head2 COMPILER WARNINGS	5202	=head2 COMPILER WARNINGS
4230		5203
4231	Depending on your compiler and compiler settings, you might get no or a	5204	Depending on your compiler and compiler settings, you might get no or a
…		…
4242	maintainable.	5215	maintainable.
4243		5216
4244	And of course, some compiler warnings are just plain stupid, or simply	5217	And of course, some compiler warnings are just plain stupid, or simply
4245	wrong (because they don't actually warn about the condition their message	5218	wrong (because they don't actually warn about the condition their message
4246	seems to warn about). For example, certain older gcc versions had some	5219	seems to warn about). For example, certain older gcc versions had some
4247	warnings that resulted an extreme number of false positives. These have	5220	warnings that resulted in an extreme number of false positives. These have
4248	been fixed, but some people still insist on making code warn-free with	5221	been fixed, but some people still insist on making code warn-free with
4249	such buggy versions.	5222	such buggy versions.
4250		5223
4251	While libev is written to generate as few warnings as possible,	5224	While libev is written to generate as few warnings as possible,
4252	"warn-free" code is not a goal, and it is recommended not to build libev	5225	"warn-free" code is not a goal, and it is recommended not to build libev
…		…
4288	I suggest using suppression lists.	5261	I suggest using suppression lists.
4289		5262
4290		5263
4291	=head1 PORTABILITY NOTES	5264	=head1 PORTABILITY NOTES
4292		5265
		5266	=head2 GNU/LINUX 32 BIT LIMITATIONS
		5267
		5268	GNU/Linux is the only common platform that supports 64 bit file/large file
		5269	interfaces but I<disables> them by default.
		5270
		5271	That means that libev compiled in the default environment doesn't support
		5272	files larger than 2GiB or so, which mainly affects C<ev_stat> watchers.
		5273
		5274	Unfortunately, many programs try to work around this GNU/Linux issue
		5275	by enabling the large file API, which makes them incompatible with the
		5276	standard libev compiled for their system.
		5277
		5278	Likewise, libev cannot enable the large file API itself as this would
		5279	suddenly make it incompatible to the default compile time environment,
		5280	i.e. all programs not using special compile switches.
		5281
		5282	=head2 OS/X AND DARWIN BUGS
		5283
		5284	The whole thing is a bug if you ask me - basically any system interface
		5285	you touch is broken, whether it is locales, poll, kqueue or even the
		5286	OpenGL drivers.
		5287
		5288	=head3 C<kqueue> is buggy
		5289
		5290	The kqueue syscall is broken in all known versions - most versions support
		5291	only sockets, many support pipes.
		5292
		5293	Libev tries to work around this by not using C<kqueue> by default on this
		5294	rotten platform, but of course you can still ask for it when creating a
		5295	loop - embedding a socket-only kqueue loop into a select-based one is
		5296	probably going to work well.
		5297
		5298	=head3 C<poll> is buggy
		5299
		5300	Instead of fixing C<kqueue>, Apple replaced their (working) C<poll>
		5301	implementation by something calling C<kqueue> internally around the 10.5.6
		5302	release, so now C<kqueue> I<and> C<poll> are broken.
		5303
		5304	Libev tries to work around this by not using C<poll> by default on
		5305	this rotten platform, but of course you can still ask for it when creating
		5306	a loop.
		5307
		5308	=head3 C<select> is buggy
		5309
		5310	All that's left is C<select>, and of course Apple found a way to fuck this
		5311	one up as well: On OS/X, C<select> actively limits the number of file
		5312	descriptors you can pass in to 1024 - your program suddenly crashes when
		5313	you use more.
		5314
		5315	There is an undocumented "workaround" for this - defining
		5316	C<_DARWIN_UNLIMITED_SELECT>, which libev tries to use, so select I<should>
		5317	work on OS/X.
		5318
		5319	=head2 SOLARIS PROBLEMS AND WORKAROUNDS
		5320
		5321	=head3 C<errno> reentrancy
		5322
		5323	The default compile environment on Solaris is unfortunately so
		5324	thread-unsafe that you can't even use components/libraries compiled
		5325	without C<-D_REENTRANT> in a threaded program, which, of course, isn't
		5326	defined by default. A valid, if stupid, implementation choice.
		5327
		5328	If you want to use libev in threaded environments you have to make sure
		5329	it's compiled with C<_REENTRANT> defined.
		5330
		5331	=head3 Event port backend
		5332
		5333	The scalable event interface for Solaris is called "event
		5334	ports". Unfortunately, this mechanism is very buggy in all major
		5335	releases. If you run into high CPU usage, your program freezes or you get
		5336	a large number of spurious wakeups, make sure you have all the relevant
		5337	and latest kernel patches applied. No, I don't know which ones, but there
		5338	are multiple ones to apply, and afterwards, event ports actually work
		5339	great.
		5340
		5341	If you can't get it to work, you can try running the program by setting
		5342	the environment variable C<LIBEV_FLAGS=3> to only allow C<poll> and
		5343	C<select> backends.
		5344
		5345	=head2 AIX POLL BUG
		5346
		5347	AIX unfortunately has a broken C<poll.h> header. Libev works around
		5348	this by trying to avoid the poll backend altogether (i.e. it's not even
		5349	compiled in), which normally isn't a big problem as C<select> works fine
		5350	with large bitsets on AIX, and AIX is dead anyway.
		5351
4293	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS	5352	=head2 WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
		5353
		5354	=head3 General issues
4294		5355
4295	Win32 doesn't support any of the standards (e.g. POSIX) that libev	5356	Win32 doesn't support any of the standards (e.g. POSIX) that libev
4296	requires, and its I/O model is fundamentally incompatible with the POSIX	5357	requires, and its I/O model is fundamentally incompatible with the POSIX
4297	model. Libev still offers limited functionality on this platform in	5358	model. Libev still offers limited functionality on this platform in
4298	the form of the C<EVBACKEND_SELECT> backend, and only supports socket	5359	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
4299	descriptors. This only applies when using Win32 natively, not when using	5360	descriptors. This only applies when using Win32 natively, not when using
4300	e.g. cygwin.	5361	e.g. cygwin. Actually, it only applies to the microsofts own compilers,
		5362	as every compiler comes with a slightly differently broken/incompatible
		5363	environment.
4301		5364
4302	Lifting these limitations would basically require the full	5365	Lifting these limitations would basically require the full
4303	re-implementation of the I/O system. If you are into these kinds of	5366	re-implementation of the I/O system. If you are into this kind of thing,
4304	things, then note that glib does exactly that for you in a very portable	5367	then note that glib does exactly that for you in a very portable way (note
4305	way (note also that glib is the slowest event library known to man).	5368	also that glib is the slowest event library known to man).
4306		5369
4307	There is no supported compilation method available on windows except	5370	There is no supported compilation method available on windows except
4308	embedding it into other applications.	5371	embedding it into other applications.
4309		5372
4310	Sensible signal handling is officially unsupported by Microsoft - libev	5373	Sensible signal handling is officially unsupported by Microsoft - libev
…		…
4338	you do I<not> compile the F<ev.c> or any other embedded source files!):	5401	you do I<not> compile the F<ev.c> or any other embedded source files!):
4339		5402
4340	#include "evwrap.h"	5403	#include "evwrap.h"
4341	#include "ev.c"	5404	#include "ev.c"
4342		5405
4343	=over 4
4344
4345	=item The winsocket select function	5406	=head3 The winsocket C<select> function
4346		5407
4347	The winsocket C<select> function doesn't follow POSIX in that it	5408	The winsocket C<select> function doesn't follow POSIX in that it
4348	requires socket I<handles> and not socket I<file descriptors> (it is	5409	requires socket I<handles> and not socket I<file descriptors> (it is
4349	also extremely buggy). This makes select very inefficient, and also	5410	also extremely buggy). This makes select very inefficient, and also
4350	requires a mapping from file descriptors to socket handles (the Microsoft	5411	requires a mapping from file descriptors to socket handles (the Microsoft
…		…
4359	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */	5420	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
4360		5421
4361	Note that winsockets handling of fd sets is O(n), so you can easily get a	5422	Note that winsockets handling of fd sets is O(n), so you can easily get a
4362	complexity in the O(n²) range when using win32.	5423	complexity in the O(n²) range when using win32.
4363		5424
4364	=item Limited number of file descriptors	5425	=head3 Limited number of file descriptors
4365		5426
4366	Windows has numerous arbitrary (and low) limits on things.	5427	Windows has numerous arbitrary (and low) limits on things.
4367		5428
4368	Early versions of winsocket's select only supported waiting for a maximum	5429	Early versions of winsocket's select only supported waiting for a maximum
4369	of C<64> handles (probably owning to the fact that all windows kernels	5430	of C<64> handles (probably owning to the fact that all windows kernels
…		…
4384	runtime libraries. This might get you to about C<512> or C<2048> sockets	5445	runtime libraries. This might get you to about C<512> or C<2048> sockets
4385	(depending on windows version and/or the phase of the moon). To get more,	5446	(depending on windows version and/or the phase of the moon). To get more,
4386	you need to wrap all I/O functions and provide your own fd management, but	5447	you need to wrap all I/O functions and provide your own fd management, but
4387	the cost of calling select (O(n²)) will likely make this unworkable.	5448	the cost of calling select (O(n²)) will likely make this unworkable.
4388		5449
4389	=back
4390
4391	=head2 PORTABILITY REQUIREMENTS	5450	=head2 PORTABILITY REQUIREMENTS
4392		5451
4393	In addition to a working ISO-C implementation and of course the	5452	In addition to a working ISO-C implementation and of course the
4394	backend-specific APIs, libev relies on a few additional extensions:	5453	backend-specific APIs, libev relies on a few additional extensions:
4395		5454
…		…
4401	Libev assumes not only that all watcher pointers have the same internal	5460	Libev assumes not only that all watcher pointers have the same internal
4402	structure (guaranteed by POSIX but not by ISO C for example), but it also	5461	structure (guaranteed by POSIX but not by ISO C for example), but it also
4403	assumes that the same (machine) code can be used to call any watcher	5462	assumes that the same (machine) code can be used to call any watcher
4404	callback: The watcher callbacks have different type signatures, but libev	5463	callback: The watcher callbacks have different type signatures, but libev
4405	calls them using an C<ev_watcher *> internally.	5464	calls them using an C<ev_watcher *> internally.
		5465
		5466	=item null pointers and integer zero are represented by 0 bytes
		5467
		5468	Libev uses C<memset> to initialise structs and arrays to C<0> bytes, and
		5469	relies on this setting pointers and integers to null.
		5470
		5471	=item pointer accesses must be thread-atomic
		5472
		5473	Accessing a pointer value must be atomic, it must both be readable and
		5474	writable in one piece - this is the case on all current architectures.
4406		5475
4407	=item C<sig_atomic_t volatile> must be thread-atomic as well	5476	=item C<sig_atomic_t volatile> must be thread-atomic as well
4408		5477
4409	The type C<sig_atomic_t volatile> (or whatever is defined as	5478	The type C<sig_atomic_t volatile> (or whatever is defined as
4410	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different	5479	C<EV_ATOMIC_T>) must be atomic with respect to accesses from different
…		…
4419	thread" or will block signals process-wide, both behaviours would	5488	thread" or will block signals process-wide, both behaviours would
4420	be compatible with libev. Interaction between C<sigprocmask> and	5489	be compatible with libev. Interaction between C<sigprocmask> and
4421	C<pthread_sigmask> could complicate things, however.	5490	C<pthread_sigmask> could complicate things, however.
4422		5491
4423	The most portable way to handle signals is to block signals in all threads	5492	The most portable way to handle signals is to block signals in all threads
4424	except the initial one, and run the default loop in the initial thread as	5493	except the initial one, and run the signal handling loop in the initial
4425	well.	5494	thread as well.
4426		5495
4427	=item C<long> must be large enough for common memory allocation sizes	5496	=item C<long> must be large enough for common memory allocation sizes
4428		5497
4429	To improve portability and simplify its API, libev uses C<long> internally	5498	To improve portability and simplify its API, libev uses C<long> internally
4430	instead of C<size_t> when allocating its data structures. On non-POSIX	5499	instead of C<size_t> when allocating its data structures. On non-POSIX
…		…
4433	watchers.	5502	watchers.
4434		5503
4435	=item C<double> must hold a time value in seconds with enough accuracy	5504	=item C<double> must hold a time value in seconds with enough accuracy
4436		5505
4437	The type C<double> is used to represent timestamps. It is required to	5506	The type C<double> is used to represent timestamps. It is required to
4438	have at least 51 bits of mantissa (and 9 bits of exponent), which is good	5507	have at least 51 bits of mantissa (and 9 bits of exponent), which is
4439	enough for at least into the year 4000. This requirement is fulfilled by	5508	good enough for at least into the year 4000 with millisecond accuracy
		5509	(the design goal for libev). This requirement is overfulfilled by
4440	implementations implementing IEEE 754, which is basically all existing	5510	implementations using IEEE 754, which is basically all existing ones.
		5511
4441	ones. With IEEE 754 doubles, you get microsecond accuracy until at least	5512	With IEEE 754 doubles, you get microsecond accuracy until at least the
4442	2200.	5513	year 2255 (and millisecond accuracy till the year 287396 - by then, libev
		5514	is either obsolete or somebody patched it to use C<long double> or
		5515	something like that, just kidding).
4443		5516
4444	=back	5517	=back
4445		5518
4446	If you know of other additional requirements drop me a note.	5519	If you know of other additional requirements drop me a note.
4447		5520
…		…
4509	=item Processing ev_async_send: O(number_of_async_watchers)	5582	=item Processing ev_async_send: O(number_of_async_watchers)
4510		5583
4511	=item Processing signals: O(max_signal_number)	5584	=item Processing signals: O(max_signal_number)
4512		5585
4513	Sending involves a system call I<iff> there were no other C<ev_async_send>	5586	Sending involves a system call I<iff> there were no other C<ev_async_send>
4514	calls in the current loop iteration. Checking for async and signal events	5587	calls in the current loop iteration and the loop is currently
		5588	blocked. Checking for async and signal events involves iterating over all
4515	involves iterating over all running async watchers or all signal numbers.	5589	running async watchers or all signal numbers.
4516		5590
4517	=back	5591	=back
4518		5592
4519		5593
		5594	=head1 PORTING FROM LIBEV 3.X TO 4.X
		5595
		5596	The major version 4 introduced some incompatible changes to the API.
		5597
		5598	At the moment, the C<ev.h> header file provides compatibility definitions
		5599	for all changes, so most programs should still compile. The compatibility
		5600	layer might be removed in later versions of libev, so better update to the
		5601	new API early than late.
		5602
		5603	=over 4
		5604
		5605	=item C<EV_COMPAT3> backwards compatibility mechanism
		5606
		5607	The backward compatibility mechanism can be controlled by
		5608	C<EV_COMPAT3>. See L</"PREPROCESSOR SYMBOLS/MACROS"> in the L</EMBEDDING>
		5609	section.
		5610
		5611	=item C<ev_default_destroy> and C<ev_default_fork> have been removed
		5612
		5613	These calls can be replaced easily by their C<ev_loop_xxx> counterparts:
		5614
		5615	ev_loop_destroy (EV_DEFAULT_UC);
		5616	ev_loop_fork (EV_DEFAULT);
		5617
		5618	=item function/symbol renames
		5619
		5620	A number of functions and symbols have been renamed:
		5621
		5622	ev_loop => ev_run
		5623	EVLOOP_NONBLOCK => EVRUN_NOWAIT
		5624	EVLOOP_ONESHOT => EVRUN_ONCE
		5625
		5626	ev_unloop => ev_break
		5627	EVUNLOOP_CANCEL => EVBREAK_CANCEL
		5628	EVUNLOOP_ONE => EVBREAK_ONE
		5629	EVUNLOOP_ALL => EVBREAK_ALL
		5630
		5631	EV_TIMEOUT => EV_TIMER
		5632
		5633	ev_loop_count => ev_iteration
		5634	ev_loop_depth => ev_depth
		5635	ev_loop_verify => ev_verify
		5636
		5637	Most functions working on C<struct ev_loop> objects don't have an
		5638	C<ev_loop_> prefix, so it was removed; C<ev_loop>, C<ev_unloop> and
		5639	associated constants have been renamed to not collide with the C<struct
		5640	ev_loop> anymore and C<EV_TIMER> now follows the same naming scheme
		5641	as all other watcher types. Note that C<ev_loop_fork> is still called
		5642	C<ev_loop_fork> because it would otherwise clash with the C<ev_fork>
		5643	typedef.
		5644
		5645	=item C<EV_MINIMAL> mechanism replaced by C<EV_FEATURES>
		5646
		5647	The preprocessor symbol C<EV_MINIMAL> has been replaced by a different
		5648	mechanism, C<EV_FEATURES>. Programs using C<EV_MINIMAL> usually compile
		5649	and work, but the library code will of course be larger.
		5650
		5651	=back
		5652
		5653
4520	=head1 GLOSSARY	5654	=head1 GLOSSARY
4521		5655
4522	=over 4	5656	=over 4
4523		5657
4524	=item active	5658	=item active
4525		5659
4526	A watcher is active as long as it has been started (has been attached to	5660	A watcher is active as long as it has been started and not yet stopped.
4527	an event loop) but not yet stopped (disassociated from the event loop).	5661	See L</WATCHER STATES> for details.
4528		5662
4529	=item application	5663	=item application
4530		5664
4531	In this document, an application is whatever is using libev.	5665	In this document, an application is whatever is using libev.
		5666
		5667	=item backend
		5668
		5669	The part of the code dealing with the operating system interfaces.
4532		5670
4533	=item callback	5671	=item callback
4534		5672
4535	The address of a function that is called when some event has been	5673	The address of a function that is called when some event has been
4536	detected. Callbacks are being passed the event loop, the watcher that	5674	detected. Callbacks are being passed the event loop, the watcher that
4537	received the event, and the actual event bitset.	5675	received the event, and the actual event bitset.
4538		5676
4539	=item callback invocation	5677	=item callback/watcher invocation
4540		5678
4541	The act of calling the callback associated with a watcher.	5679	The act of calling the callback associated with a watcher.
4542		5680
4543	=item event	5681	=item event
4544		5682
4545	A change of state of some external event, such as data now being available	5683	A change of state of some external event, such as data now being available
4546	for reading on a file descriptor, time having passed or simply not having	5684	for reading on a file descriptor, time having passed or simply not having
4547	any other events happening anymore.	5685	any other events happening anymore.
4548		5686
4549	In libev, events are represented as single bits (such as C<EV_READ> or	5687	In libev, events are represented as single bits (such as C<EV_READ> or
4550	C<EV_TIMEOUT>).	5688	C<EV_TIMER>).
4551		5689
4552	=item event library	5690	=item event library
4553		5691
4554	A software package implementing an event model and loop.	5692	A software package implementing an event model and loop.
4555		5693
…		…
4563	The model used to describe how an event loop handles and processes	5701	The model used to describe how an event loop handles and processes
4564	watchers and events.	5702	watchers and events.
4565		5703
4566	=item pending	5704	=item pending
4567		5705
4568	A watcher is pending as soon as the corresponding event has been detected,	5706	A watcher is pending as soon as the corresponding event has been
4569	and stops being pending as soon as the watcher will be invoked or its	5707	detected. See L</WATCHER STATES> for details.
4570	pending status is explicitly cleared by the application.
4571
4572	A watcher can be pending, but not active. Stopping a watcher also clears
4573	its pending status.
4574		5708
4575	=item real time	5709	=item real time
4576		5710
4577	The physical time that is observed. It is apparently strictly monotonic :)	5711	The physical time that is observed. It is apparently strictly monotonic :)
4578		5712
4579	=item wall-clock time	5713	=item wall-clock time
4580		5714
4581	The time and date as shown on clocks. Unlike real time, it can actually	5715	The time and date as shown on clocks. Unlike real time, it can actually
4582	be wrong and jump forwards and backwards, e.g. when the you adjust your	5716	be wrong and jump forwards and backwards, e.g. when you adjust your
4583	clock.	5717	clock.
4584		5718
4585	=item watcher	5719	=item watcher
4586		5720
4587	A data structure that describes interest in certain events. Watchers need	5721	A data structure that describes interest in certain events. Watchers need
4588	to be started (attached to an event loop) before they can receive events.	5722	to be started (attached to an event loop) before they can receive events.
4589		5723
4590	=item watcher invocation
4591
4592	The act of calling the callback associated with a watcher.
4593
4594	=back	5724	=back
4595		5725
4596	=head1 AUTHOR	5726	=head1 AUTHOR
4597		5727
4598	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael Magnusson.	5728	Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael
		5729	Magnusson and Emanuele Giaquinta, and minor corrections by many others.
4599		5730

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines