[ViewVC] Diff of: cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.55 by root, Tue Nov 27 20:38:07 2007 UTC vs.
Revision 1.64 by root, Sat Dec 1 15:32:53 2007 UTC

 details of the event, and then hand it over to libev by I<starting> the
 watcher.
 =head1 FEATURES
-Libev supports C<select>, C<poll>, the linux-specific C<epoll>, the
+Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
-bsd-specific C<kqueue> and the solaris-specific event port mechanisms
+BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
-for file descriptor events (C<ev_io>), relative timers (C<ev_timer>),
+for file descriptor events (C<ev_io>), the Linux C<inotify> interface
+(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers
-absolute timers with customised rescheduling (C<ev_periodic>), synchronous
+with customised rescheduling (C<ev_periodic>), synchronous signals
-signals (C<ev_signal>), process status change events (C<ev_child>), and
+(C<ev_signal>), process status change events (C<ev_child>), and event
-event watchers dealing with the event loop mechanism itself (C<ev_idle>,
+watchers dealing with the event loop mechanism itself (C<ev_idle>,
 C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as
 file watchers (C<ev_stat>) and even limited support for fork events
 (C<ev_fork>).
 It also is quite fast (see this
 C<ev_embeddable_backends () & ev_supported_backends ()>, likewise for
 recommended ones.
 See the description of C<ev_embed> watchers for more info.
-=item ev_set_allocator (void *(*cb)(void *ptr, size_t size))
+=item ev_set_allocator (void *(*cb)(void *ptr, long size))
-Sets the allocation function to use (the prototype and semantics are
+Sets the allocation function to use (the prototype is similar - the
-identical to the realloc C function). It is used to allocate and free
+semantics is identical - to the realloc C function). It is used to
-memory (no surprises here). If it returns zero when memory needs to be
+allocate and free memory (no surprises here). If it returns zero when
-allocated, the library might abort or take some potentially destructive
+memory needs to be allocated, the library might abort or take some
-action. The default is your system realloc function.
+potentially destructive action. The default is your system realloc
+function.
 You could override this function in high-availability programs to, say,
 free some memory if it cannot allocate memory, to use a special allocator,
 or even to sleep a while and retry until some memory is available.
 or setgid) then libev will I<not> look at the environment variable
 C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will
 override the flags completely if it is found in the environment. This is
 useful to try out specific backends to test their performance, or to work
 around bugs.
+=item C<EVFLAG_FORKCHECK>
+Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after
+a fork, you can also make libev check for a fork in each iteration by
+enabling this flag.
+This works by calling C<getpid ()> on every iteration of the loop,
+and thus this might slow down your event loop if you do a lot of loop
+iterations and little real work, but is usually not noticable (on my
+Linux system for example, C<getpid> is actually a simple 5-insn sequence
+without a syscall and thus I<very> fast, but my Linux system also has
+C<pthread_atfork> which is even faster).
+The big advantage of this flag is that you can forget about fork (and
+forget about forgetting to tell libev about forking) when you use this
+flag.
+This flag setting cannot be overriden or specified in the C<LIBEV_FLAGS>
+environment variable.
 =item C<EVBACKEND_SELECT>  (value 1, portable select backend)
 This is your standard select(2) backend. Not I<completely> standard, as
 libev tries to roll its own fd_set with no limits on the number of fds,
 =item ev_timer_again (loop)
 This will act as if the timer timed out and restart it again if it is
 repeating. The exact semantics are:
+If the timer is pending, its pending status is cleared.
-If the timer is started but nonrepeating, stop it.
+If the timer is started but nonrepeating, stop it (as if it timed out).
-If the timer is repeating, either start it if necessary (with the repeat
+If the timer is repeating, either start it if necessary (with the
-value), or reset the running timer to the repeat value.
+C<repeat> value), or reset the running timer to the C<repeat> value.
 This sounds a bit complicated, but here is a useful and typical
-example: Imagine you have a tcp connection and you want a so-called
+example: Imagine you have a tcp connection and you want a so-called idle
-idle timeout, that is, you want to be called when there have been,
+timeout, that is, you want to be called when there have been, say, 60
-say, 60 seconds of inactivity on the socket. The easiest way to do
+seconds of inactivity on the socket. The easiest way to do this is to
-this is to configure an C<ev_timer> with C<after>=C<repeat>=C<60> and calling
+configure an C<ev_timer> with a C<repeat> value of C<60> and then call
 C<ev_timer_again> each time you successfully read or write some data. If
 you go into an idle state where you do not expect data to travel on the
-socket, you can stop the timer, and again will automatically restart it if
+socket, you can C<ev_timer_stop> the timer, and C<ev_timer_again> will
-need be.
+automatically restart it if need be.
-You can also ignore the C<after> value and C<ev_timer_start> altogether
+That means you can ignore the C<after> value and C<ev_timer_start>
-and only ever use the C<repeat> value:
+altogether and only ever use the C<repeat> value and C<ev_timer_again>:
    ev_timer_init (timer, callback, 0., 5.);
    ev_timer_again (loop, timer);
    ...
    timer->again = 17.;
    ev_timer_again (loop, timer);
    ...
    timer->again = 10.;
    ev_timer_again (loop, timer);
-This is more efficient then stopping/starting the timer eahc time you want
+This is more slightly efficient then stopping/starting the timer each time
-to modify its timeout value.
+you want to modify its timeout value.
 =item ev_tstamp repeat [read-write]
 The current C<repeat> value. Will be used each time the watcher times out
 or C<ev_timer_again> is called and determines the next timeout (if any),
 not exist" is a status change like any other. The condition "path does
 not exist" is signified by the C<st_nlink> field being zero (which is
 otherwise always forced to be at least one) and all the other fields of
 the stat buffer having unspecified contents.
+The path I<should> be absolute and I<must not> end in a slash. If it is
+relative and your working directory changes, the behaviour is undefined.
 Since there is no standard to do this, the portable implementation simply
-calls C<stat (2)> regulalry on the path to see if it changed somehow. You
+calls C<stat (2)> regularly on the path to see if it changed somehow. You
 can specify a recommended polling interval for this case. If you specify
 a polling interval of C<0> (highly recommended!) then a I<suitable,
 unspecified default> value will be used (which you can expect to be around
 five seconds, although this might change dynamically). Libev will also
 impose a minimum interval which is currently around C<0.1>, but thats
 This watcher type is not meant for massive numbers of stat watchers,
 as even with OS-supported change notifications, this can be
 resource-intensive.
-At the time of this writing, no specific OS backends are implemented, but
+At the time of this writing, only the Linux inotify interface is
-if demand increases, at least a kqueue and inotify backend will be added.
+implemented (implementing kqueue support is left as an exercise for the
+reader). Inotify will be used to give hints only and should not change the
+semantics of C<ev_stat> watchers, which means that libev sometimes needs
+to fall back to regular polling again even with inotify, but changes are
+usually detected immediately, and if the file exists there will be no
+polling.
 =over 4
 =item ev_stat_init (ev_stat *, callback, const char *path, ev_tstamp interval)
   // create io watchers for each fd and a timer before blocking
   static void
   adns_prepare_cb (ev_loop *loop, ev_prepare *w, int revents)
   {
-    int timeout = 3600000;truct pollfd fds [nfd];
+    int timeout = 3600000;
+    struct pollfd fds [nfd];
     // actual code will need to loop here and realloc etc.
     adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
     /* the callback is illegal, but won't be called as we stop during check */
     ev_timer_init (&tw, 0, timeout * 1e-3);
 Similar to the other two macros, this gives you the value of the default
 loop, if multiple loops are supported ("ev loop default").
 =back
-Example: Declare and initialise a check watcher, working regardless of
+Example: Declare and initialise a check watcher, utilising the above
-wether multiple loops are supported or not.
+macros so it will work regardless of wether multiple loops are supported
+or not.
   static void
   check_cb (EV_P_ ev_timer *w, int revents)
   {
     ev_check_stop (EV_A_ w);
   ev_check check;
   ev_check_init (&check, check_cb);
   ev_check_start (EV_DEFAULT_ &check);
   ev_loop (EV_DEFAULT_ 0);
 =head1 EMBEDDING
 Libev can (and often is) directly embedded into host
 applications. Examples of applications that embed it include the Deliantra
   ev_vars.h
   ev_wrap.h
   ev_win32.c      required on win32 platforms only
-  ev_select.c     only when select backend is enabled (which is by default)
+  ev_select.c     only when select backend is enabled (which is enabled by default)
   ev_poll.c       only when poll backend is enabled (disabled by default)
   ev_epoll.c      only when the epoll backend is enabled (disabled by default)
   ev_kqueue.c     only when the kqueue backend is enabled (disabled by default)
   ev_port.c       only when the solaris port backend is enabled (disabled by default)
 =item EV_USE_DEVPOLL
 reserved for future expansion, works like the USE symbols above.
+=item EV_USE_INOTIFY
+If defined to be C<1>, libev will compile in support for the Linux inotify
+interface to speed up C<ev_stat> watchers. Its actual availability will
+be detected at runtime.
 =item EV_H
 The name of the F<ev.h> header file used to include it. The default if
 undefined is C<< <ev.h> >> in F<event.h> and C<"ev.h"> in F<ev.c>. This
 can be used to virtually rename the F<ev.h> header file in case of conflicts.
 =item EV_PID_HASHSIZE
 C<ev_child> watchers use a small hash table to distribute workload by
 pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more
 than enough. If you need to manage thousands of children you might want to
-increase this value.
+increase this value (I<must> be a power of two).
+=item EV_INOTIFY_HASHSIZE
+C<ev_staz> watchers use a small hash table to distribute workload by
+inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),
+usually more than enough. If you need to manage thousands of C<ev_stat>
+watchers you might want to increase this value (I<must> be a power of
+two).
 =item EV_COMMON
 By default, all watchers have a C<void *data> member. By redefining
 this macro to a something else you can include more and other types of
 interface) and F<EV.xs> (implementation) files. Only the F<EV.xs> file
 will be compiled. It is pretty complex because it provides its own header
 file.
 The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
-that everybody includes and which overrides some autoconf choices:
+that everybody includes and which overrides some configure choices:
+  #define EV_MINIMAL 1
   #define EV_USE_POLL 0
   #define EV_MULTIPLICITY 0
-  #define EV_PERIODICS 0
+  #define EV_PERIODIC_ENABLE 0
+  #define EV_STAT_ENABLE 0
+  #define EV_FORK_ENABLE 0
   #define EV_CONFIG_H <config.h>
+  #define EV_MINPRI 0
+  #define EV_MAXPRI 0
   #include "ev++.h"
 And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
 =item Starting io/check/prepare/idle/signal/child watchers: O(1)
 =item Stopping check/prepare/idle watchers: O(1)
-=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % 16))
+=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
 =item Finding the next timer per loop iteration: O(1)
 =item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing libev/ev.pod (file contents): Revision 1.55 by root, Tue Nov 27 20:38:07 2007 UTC vs. Revision 1.64 by root, Sat Dec 1 15:32:53 2007 UTC

Diff Legend

Comparing libev/ev.pod (file contents):
Revision 1.55 by root, Tue Nov 27 20:38:07 2007 UTC vs.
Revision 1.64 by root, Sat Dec 1 15:32:53 2007 UTC