[ViewVC] Diff of: cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.72 by root, Fri Dec 7 20:19:16 2007 UTC vs.
Revision 1.111 by root, Tue Dec 25 18:01:20 2007 UTC

…		…
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	#include <ev.h>	7	#include <ev.h>
8		8
9	=head1 EXAMPLE PROGRAM	9	=head2 EXAMPLE PROGRAM
10		10
11	#include <ev.h>	11	#include <ev.h>
12		12
13	ev_io stdin_watcher;	13	ev_io stdin_watcher;
14	ev_timer timeout_watcher;	14	ev_timer timeout_watcher;
…		…
53	The newest version of this document is also available as a html-formatted	53	The newest version of this document is also available as a html-formatted
54	web page you might find easier to navigate when reading it for the first	54	web page you might find easier to navigate when reading it for the first
55	time: L<http://cvs.schmorp.de/libev/ev.html>.	55	time: L<http://cvs.schmorp.de/libev/ev.html>.
56		56
57	Libev is an event loop: you register interest in certain events (such as a	57	Libev is an event loop: you register interest in certain events (such as a
58	file descriptor being readable or a timeout occuring), and it will manage	58	file descriptor being readable or a timeout occurring), and it will manage
59	these event sources and provide your program with events.	59	these event sources and provide your program with events.
60		60
61	To do this, it must take more or less complete control over your process	61	To do this, it must take more or less complete control over your process
62	(or thread) by executing the I<event loop> handler, and will then	62	(or thread) by executing the I<event loop> handler, and will then
63	communicate events via a callback mechanism.	63	communicate events via a callback mechanism.
…		…
65	You register interest in certain events by registering so-called I<event	65	You register interest in certain events by registering so-called I<event
66	watchers>, which are relatively small C structures you initialise with the	66	watchers>, which are relatively small C structures you initialise with the
67	details of the event, and then hand it over to libev by I<starting> the	67	details of the event, and then hand it over to libev by I<starting> the
68	watcher.	68	watcher.
69		69
70	=head1 FEATURES	70	=head2 FEATURES
71		71
72	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	72	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
73	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	73	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
74	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	74	for file descriptor events (C<ev_io>), the Linux C<inotify> interface
75	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers	75	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers
…		…
82		82
83	It also is quite fast (see this	83	It also is quite fast (see this
84	L<benchmark\|http://libev.schmorp.de/bench.html> comparing it to libevent	84	L<benchmark\|http://libev.schmorp.de/bench.html> comparing it to libevent
85	for example).	85	for example).
86		86
87	=head1 CONVENTIONS	87	=head2 CONVENTIONS
88		88
89	Libev is very configurable. In this manual the default configuration will	89	Libev is very configurable. In this manual the default configuration will
90	be described, which supports multiple event loops. For more info about	90	be described, which supports multiple event loops. For more info about
91	various configuration options please have a look at B<EMBED> section in	91	various configuration options please have a look at B<EMBED> section in
92	this manual. If libev was configured without support for multiple event	92	this manual. If libev was configured without support for multiple event
93	loops, then all functions taking an initial argument of name C<loop>	93	loops, then all functions taking an initial argument of name C<loop>
94	(which is always of type C<struct ev_loop *>) will not have this argument.	94	(which is always of type C<struct ev_loop *>) will not have this argument.
95		95
96	=head1 TIME REPRESENTATION	96	=head2 TIME REPRESENTATION
97		97
98	Libev represents time as a single floating point number, representing the	98	Libev represents time as a single floating point number, representing the
99	(fractional) number of seconds since the (POSIX) epoch (somewhere near	99	(fractional) number of seconds since the (POSIX) epoch (somewhere near
100	the beginning of 1970, details are complicated, don't ask). This type is	100	the beginning of 1970, details are complicated, don't ask). This type is
101	called C<ev_tstamp>, which is what you should use too. It usually aliases	101	called C<ev_tstamp>, which is what you should use too. It usually aliases
102	to the C<double> type in C, and when you need to do any calculations on	102	to the C<double> type in C, and when you need to do any calculations on
103	it, you should treat it as such.	103	it, you should treat it as some floatingpoint value. Unlike the name
		104	component C<stamp> might indicate, it is also used for time differences
		105	throughout libev.
104		106
105	=head1 GLOBAL FUNCTIONS	107	=head1 GLOBAL FUNCTIONS
106		108
107	These functions can be called anytime, even before initialising the	109	These functions can be called anytime, even before initialising the
108	library in any way.	110	library in any way.
…		…
113		115
114	Returns the current time as libev would use it. Please note that the	116	Returns the current time as libev would use it. Please note that the
115	C<ev_now> function is usually faster and also often returns the timestamp	117	C<ev_now> function is usually faster and also often returns the timestamp
116	you actually want to know.	118	you actually want to know.
117		119
		120	=item ev_sleep (ev_tstamp interval)
		121
		122	Sleep for the given interval: The current thread will be blocked until
		123	either it is interrupted or the given time interval has passed. Basically
		124	this is a subsecond-resolution C<sleep ()>.
		125
118	=item int ev_version_major ()	126	=item int ev_version_major ()
119		127
120	=item int ev_version_minor ()	128	=item int ev_version_minor ()
121		129
122	You can find out the major and minor version numbers of the library	130	You can find out the major and minor ABI version numbers of the library
123	you linked against by calling the functions C<ev_version_major> and	131	you linked against by calling the functions C<ev_version_major> and
124	C<ev_version_minor>. If you want, you can compare against the global	132	C<ev_version_minor>. If you want, you can compare against the global
125	symbols C<EV_VERSION_MAJOR> and C<EV_VERSION_MINOR>, which specify the	133	symbols C<EV_VERSION_MAJOR> and C<EV_VERSION_MINOR>, which specify the
126	version of the library your program was compiled against.	134	version of the library your program was compiled against.
127		135
		136	These version numbers refer to the ABI version of the library, not the
		137	release version.
		138
128	Usually, it's a good idea to terminate if the major versions mismatch,	139	Usually, it's a good idea to terminate if the major versions mismatch,
129	as this indicates an incompatible change. Minor versions are usually	140	as this indicates an incompatible change. Minor versions are usually
130	compatible to older versions, so a larger minor version alone is usually	141	compatible to older versions, so a larger minor version alone is usually
131	not a problem.	142	not a problem.
132		143
133	Example: Make sure we haven't accidentally been linked against the wrong	144	Example: Make sure we haven't accidentally been linked against the wrong
134	version.	145	version.
…		…
295	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	306	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
296		307
297	This is your standard select(2) backend. Not I<completely> standard, as	308	This is your standard select(2) backend. Not I<completely> standard, as
298	libev tries to roll its own fd_set with no limits on the number of fds,	309	libev tries to roll its own fd_set with no limits on the number of fds,
299	but if that fails, expect a fairly low limit on the number of fds when	310	but if that fails, expect a fairly low limit on the number of fds when
300	using this backend. It doesn't scale too well (O(highest_fd)), but its usually	311	using this backend. It doesn't scale too well (O(highest_fd)), but its
301	the fastest backend for a low number of fds.	312	usually the fastest backend for a low number of (low-numbered :) fds.
		313
		314	To get good performance out of this backend you need a high amount of
		315	parallelity (most of the file descriptors should be busy). If you are
		316	writing a server, you should C<accept ()> in a loop to accept as many
		317	connections as possible during one iteration. You might also want to have
		318	a look at C<ev_set_io_collect_interval ()> to increase the amount of
		319	readyness notifications you get per iteration.
302		320
303	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)	321	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)
304		322
305	And this is your standard poll(2) backend. It's more complicated than	323	And this is your standard poll(2) backend. It's more complicated
306	select, but handles sparse fds better and has no artificial limit on the	324	than select, but handles sparse fds better and has no artificial
307	number of fds you can use (except it will slow down considerably with a	325	limit on the number of fds you can use (except it will slow down
308	lot of inactive fds). It scales similarly to select, i.e. O(total_fds).	326	considerably with a lot of inactive fds). It scales similarly to select,
		327	i.e. O(total_fds). See the entry for C<EVBACKEND_SELECT>, above, for
		328	performance tips.
309		329
310	=item C<EVBACKEND_EPOLL> (value 4, Linux)	330	=item C<EVBACKEND_EPOLL> (value 4, Linux)
311		331
312	For few fds, this backend is a bit little slower than poll and select,	332	For few fds, this backend is a bit little slower than poll and select,
313	but it scales phenomenally better. While poll and select usually scale like	333	but it scales phenomenally better. While poll and select usually scale
314	O(total_fds) where n is the total number of fds (or the highest fd), epoll scales	334	like O(total_fds) where n is the total number of fds (or the highest fd),
315	either O(1) or O(active_fds).	335	epoll scales either O(1) or O(active_fds). The epoll design has a number
		336	of shortcomings, such as silently dropping events in some hard-to-detect
		337	cases and rewiring a syscall per fd change, no fork support and bad
		338	support for dup.
316		339
317	While stopping and starting an I/O watcher in the same iteration will	340	While stopping, setting and starting an I/O watcher in the same iteration
318	result in some caching, there is still a syscall per such incident	341	will result in some caching, there is still a syscall per such incident
319	(because the fd could point to a different file description now), so its	342	(because the fd could point to a different file description now), so its
320	best to avoid that. Also, dup()ed file descriptors might not work very	343	best to avoid that. Also, C<dup ()>'ed file descriptors might not work
321	well if you register events for both fds.	344	very well if you register events for both fds.
322		345
323	Please note that epoll sometimes generates spurious notifications, so you	346	Please note that epoll sometimes generates spurious notifications, so you
324	need to use non-blocking I/O or other means to avoid blocking when no data	347	need to use non-blocking I/O or other means to avoid blocking when no data
325	(or space) is available.	348	(or space) is available.
326		349
		350	Best performance from this backend is achieved by not unregistering all
		351	watchers for a file descriptor until it has been closed, if possible, i.e.
		352	keep at least one watcher active per fd at all times.
		353
		354	While nominally embeddeble in other event loops, this feature is broken in
		355	all kernel versions tested so far.
		356
327	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	357	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
328		358
329	Kqueue deserves special mention, as at the time of this writing, it	359	Kqueue deserves special mention, as at the time of this writing, it
330	was broken on all BSDs except NetBSD (usually it doesn't work with	360	was broken on all BSDs except NetBSD (usually it doesn't work reliably
331	anything but sockets and pipes, except on Darwin, where of course its	361	with anything but sockets and pipes, except on Darwin, where of course
332	completely useless). For this reason its not being "autodetected"	362	it's completely useless). For this reason it's not being "autodetected"
333	unless you explicitly specify it explicitly in the flags (i.e. using	363	unless you explicitly specify it explicitly in the flags (i.e. using
334	C<EVBACKEND_KQUEUE>).	364	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)
		365	system like NetBSD.
		366
		367	You still can embed kqueue into a normal poll or select backend and use it
		368	only for sockets (after having made sure that sockets work with kqueue on
		369	the target platform). See C<ev_embed> watchers for more info.
335		370
336	It scales in the same way as the epoll backend, but the interface to the	371	It scales in the same way as the epoll backend, but the interface to the
337	kernel is more efficient (which says nothing about its actual speed, of	372	kernel is more efficient (which says nothing about its actual speed, of
338	course). While starting and stopping an I/O watcher does not cause an	373	course). While stopping, setting and starting an I/O watcher does never
339	extra syscall as with epoll, it still adds up to four event changes per	374	cause an extra syscall as with C<EVBACKEND_EPOLL>, it still adds up to
340	incident, so its best to avoid that.	375	two event changes per incident, support for C<fork ()> is very bad and it
		376	drops fds silently in similarly hard-to-detect cases.
		377
		378	This backend usually performs well under most conditions.
		379
		380	While nominally embeddable in other event loops, this doesn't work
		381	everywhere, so you might need to test for this. And since it is broken
		382	almost everywhere, you should only use it when you have a lot of sockets
		383	(for which it usually works), by embedding it into another event loop
		384	(e.g. C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>) and using it only for
		385	sockets.
341		386
342	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)	387	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)
343		388
344	This is not implemented yet (and might never be).	389	This is not implemented yet (and might never be, unless you send me an
		390	implementation). According to reports, C</dev/poll> only supports sockets
		391	and is not embeddable, which would limit the usefulness of this backend
		392	immensely.
345		393
346	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	394	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
347		395
348	This uses the Solaris 10 port mechanism. As with everything on Solaris,	396	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
349	it's really slow, but it still scales very well (O(active_fds)).	397	it's really slow, but it still scales very well (O(active_fds)).
350		398
351	Please note that solaris ports can result in a lot of spurious	399	Please note that solaris event ports can deliver a lot of spurious
352	notifications, so you need to use non-blocking I/O or other means to avoid	400	notifications, so you need to use non-blocking I/O or other means to avoid
353	blocking when no data (or space) is available.	401	blocking when no data (or space) is available.
		402
		403	While this backend scales well, it requires one system call per active
		404	file descriptor per loop iteration. For small and medium numbers of file
		405	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
		406	might perform better.
354		407
355	=item C<EVBACKEND_ALL>	408	=item C<EVBACKEND_ALL>
356		409
357	Try all backends (even potentially broken ones that wouldn't be tried	410	Try all backends (even potentially broken ones that wouldn't be tried
358	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	411	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
359	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	412	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
		413
		414	It is definitely not recommended to use this flag.
360		415
361	=back	416	=back
362		417
363	If one or more of these are ored into the flags value, then only these	418	If one or more of these are ored into the flags value, then only these
364	backends will be tried (in the reverse order as given here). If none are	419	backends will be tried (in the reverse order as given here). If none are
…		…
399	Destroys the default loop again (frees all memory and kernel state	454	Destroys the default loop again (frees all memory and kernel state
400	etc.). None of the active event watchers will be stopped in the normal	455	etc.). None of the active event watchers will be stopped in the normal
401	sense, so e.g. C<ev_is_active> might still return true. It is your	456	sense, so e.g. C<ev_is_active> might still return true. It is your
402	responsibility to either stop all watchers cleanly yoursef I<before>	457	responsibility to either stop all watchers cleanly yoursef I<before>
403	calling this function, or cope with the fact afterwards (which is usually	458	calling this function, or cope with the fact afterwards (which is usually
404	the easiest thing, youc na just ignore the watchers and/or C<free ()> them	459	the easiest thing, you can just ignore the watchers and/or C<free ()> them
405	for example).	460	for example).
		461
		462	Note that certain global state, such as signal state, will not be freed by
		463	this function, and related watchers (such as signal and child watchers)
		464	would need to be stopped manually.
		465
		466	In general it is not advisable to call this function except in the
		467	rare occasion where you really need to free e.g. the signal handling
		468	pipe fds. If you need dynamically allocated loops it is better to use
		469	C<ev_loop_new> and C<ev_loop_destroy>).
406		470
407	=item ev_loop_destroy (loop)	471	=item ev_loop_destroy (loop)
408		472
409	Like C<ev_default_destroy>, but destroys an event loop created by an	473	Like C<ev_default_destroy>, but destroys an event loop created by an
410	earlier call to C<ev_loop_new>.	474	earlier call to C<ev_loop_new>.
…		…
455		519
456	Returns the current "event loop time", which is the time the event loop	520	Returns the current "event loop time", which is the time the event loop
457	received events and started processing them. This timestamp does not	521	received events and started processing them. This timestamp does not
458	change as long as callbacks are being processed, and this is also the base	522	change as long as callbacks are being processed, and this is also the base
459	time used for relative timers. You can treat it as the timestamp of the	523	time used for relative timers. You can treat it as the timestamp of the
460	event occuring (or more correctly, libev finding out about it).	524	event occurring (or more correctly, libev finding out about it).
461		525
462	=item ev_loop (loop, int flags)	526	=item ev_loop (loop, int flags)
463		527
464	Finally, this is it, the event handler. This function usually is called	528	Finally, this is it, the event handler. This function usually is called
465	after you initialised all your watchers and you want to start handling	529	after you initialised all your watchers and you want to start handling
…		…
486	libev watchers. However, a pair of C<ev_prepare>/C<ev_check> watchers is	550	libev watchers. However, a pair of C<ev_prepare>/C<ev_check> watchers is
487	usually a better approach for this kind of thing.	551	usually a better approach for this kind of thing.
488		552
489	Here are the gory details of what C<ev_loop> does:	553	Here are the gory details of what C<ev_loop> does:
490		554
		555	- Before the first iteration, call any pending watchers.
491	* If there are no active watchers (reference count is zero), return.	556	* If there are no active watchers (reference count is zero), return.
492	- Queue prepare watchers and then call all outstanding watchers.	557	- Queue all prepare watchers and then call all outstanding watchers.
493	- If we have been forked, recreate the kernel state.	558	- If we have been forked, recreate the kernel state.
494	- Update the kernel state with all outstanding changes.	559	- Update the kernel state with all outstanding changes.
495	- Update the "event loop time".	560	- Update the "event loop time".
496	- Calculate for how long to block.	561	- Calculate for how long to block.
497	- Block the process, waiting for any events.	562	- Block the process, waiting for any events.
…		…
548	Example: For some weird reason, unregister the above signal handler again.	613	Example: For some weird reason, unregister the above signal handler again.
549		614
550	ev_ref (loop);	615	ev_ref (loop);
551	ev_signal_stop (loop, &exitsig);	616	ev_signal_stop (loop, &exitsig);
552		617
		618	=item ev_set_io_collect_interval (loop, ev_tstamp interval)
		619
		620	=item ev_set_timeout_collect_interval (loop, ev_tstamp interval)
		621
		622	These advanced functions influence the time that libev will spend waiting
		623	for events. Both are by default C<0>, meaning that libev will try to
		624	invoke timer/periodic callbacks and I/O callbacks with minimum latency.
		625
		626	Setting these to a higher value (the C<interval> I<must> be >= C<0>)
		627	allows libev to delay invocation of I/O and timer/periodic callbacks to
		628	increase efficiency of loop iterations.
		629
		630	The background is that sometimes your program runs just fast enough to
		631	handle one (or very few) event(s) per loop iteration. While this makes
		632	the program responsive, it also wastes a lot of CPU time to poll for new
		633	events, especially with backends like C<select ()> which have a high
		634	overhead for the actual polling but can deliver many events at once.
		635
		636	By setting a higher I<io collect interval> you allow libev to spend more
		637	time collecting I/O events, so you can handle more events per iteration,
		638	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
		639	C<ev_timer>) will be not affected. Setting this to a non-null value will
		640	introduce an additional C<ev_sleep ()> call into most loop iterations.
		641
		642	Likewise, by setting a higher I<timeout collect interval> you allow libev
		643	to spend more time collecting timeouts, at the expense of increased
		644	latency (the watcher callback will be called later). C<ev_io> watchers
		645	will not be affected. Setting this to a non-null value will not introduce
		646	any overhead in libev.
		647
		648	Many (busy) programs can usually benefit by setting the io collect
		649	interval to a value near C<0.1> or so, which is often enough for
		650	interactive servers (of course not for games), likewise for timeouts. It
		651	usually doesn't make much sense to set it to a lower value than C<0.01>,
		652	as this approsaches the timing granularity of most systems.
		653
553	=back	654	=back
554		655
555		656
556	=head1 ANATOMY OF A WATCHER	657	=head1 ANATOMY OF A WATCHER
557		658
…		…
736	=item bool ev_is_pending (ev_TYPE *watcher)	837	=item bool ev_is_pending (ev_TYPE *watcher)
737		838
738	Returns a true value iff the watcher is pending, (i.e. it has outstanding	839	Returns a true value iff the watcher is pending, (i.e. it has outstanding
739	events but its callback has not yet been invoked). As long as a watcher	840	events but its callback has not yet been invoked). As long as a watcher
740	is pending (but not active) you must not call an init function on it (but	841	is pending (but not active) you must not call an init function on it (but
741	C<ev_TYPE_set> is safe) and you must make sure the watcher is available to	842	C<ev_TYPE_set> is safe), you must not change its priority, and you must
742	libev (e.g. you cnanot C<free ()> it).	843	make sure the watcher is available to libev (e.g. you cannot C<free ()>
		844	it).
743		845
744	=item callback ev_cb (ev_TYPE *watcher)	846	=item callback ev_cb (ev_TYPE *watcher)
745		847
746	Returns the callback currently set on the watcher.	848	Returns the callback currently set on the watcher.
747		849
…		…
766	watchers on the same event and make sure one is called first.	868	watchers on the same event and make sure one is called first.
767		869
768	If you need to suppress invocation when higher priority events are pending	870	If you need to suppress invocation when higher priority events are pending
769	you need to look at C<ev_idle> watchers, which provide this functionality.	871	you need to look at C<ev_idle> watchers, which provide this functionality.
770		872
		873	You I<must not> change the priority of a watcher as long as it is active or
		874	pending.
		875
771	The default priority used by watchers when no priority has been set is	876	The default priority used by watchers when no priority has been set is
772	always C<0>, which is supposed to not be too high and not be too low :).	877	always C<0>, which is supposed to not be too high and not be too low :).
773		878
774	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is	879	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is
775	fine, as long as you do not mind that the priority value you query might	880	fine, as long as you do not mind that the priority value you query might
776	or might not have been adjusted to be within valid range.	881	or might not have been adjusted to be within valid range.
		882
		883	=item ev_invoke (loop, ev_TYPE *watcher, int revents)
		884
		885	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
		886	C<loop> nor C<revents> need to be valid as long as the watcher callback
		887	can deal with that fact.
		888
		889	=item int ev_clear_pending (loop, ev_TYPE *watcher)
		890
		891	If the watcher is pending, this function returns clears its pending status
		892	and returns its C<revents> bitset (as if its callback was invoked). If the
		893	watcher isn't pending it does nothing and returns C<0>.
777		894
778	=back	895	=back
779		896
780		897
781	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	898	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
…		…
866	In general you can register as many read and/or write event watchers per	983	In general you can register as many read and/or write event watchers per
867	fd as you want (as long as you don't confuse yourself). Setting all file	984	fd as you want (as long as you don't confuse yourself). Setting all file
868	descriptors to non-blocking mode is also usually a good idea (but not	985	descriptors to non-blocking mode is also usually a good idea (but not
869	required if you know what you are doing).	986	required if you know what you are doing).
870		987
871	You have to be careful with dup'ed file descriptors, though. Some backends
872	(the linux epoll backend is a notable example) cannot handle dup'ed file
873	descriptors correctly if you register interest in two or more fds pointing
874	to the same underlying file/socket/etc. description (that is, they share
875	the same underlying "file open").
876
877	If you must do this, then force the use of a known-to-be-good backend	988	If you must do this, then force the use of a known-to-be-good backend
878	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and	989	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and
879	C<EVBACKEND_POLL>).	990	C<EVBACKEND_POLL>).
880		991
881	Another thing you have to watch out for is that it is quite easy to	992	Another thing you have to watch out for is that it is quite easy to
…		…
891	play around with an Xlib connection), then you have to seperately re-test	1002	play around with an Xlib connection), then you have to seperately re-test
892	whether a file descriptor is really ready with a known-to-be good interface	1003	whether a file descriptor is really ready with a known-to-be good interface
893	such as poll (fortunately in our Xlib example, Xlib already does this on	1004	such as poll (fortunately in our Xlib example, Xlib already does this on
894	its own, so its quite safe to use).	1005	its own, so its quite safe to use).
895		1006
		1007	=head3 The special problem of disappearing file descriptors
		1008
		1009	Some backends (e.g. kqueue, epoll) need to be told about closing a file
		1010	descriptor (either by calling C<close> explicitly or by any other means,
		1011	such as C<dup>). The reason is that you register interest in some file
		1012	descriptor, but when it goes away, the operating system will silently drop
		1013	this interest. If another file descriptor with the same number then is
		1014	registered with libev, there is no efficient way to see that this is, in
		1015	fact, a different file descriptor.
		1016
		1017	To avoid having to explicitly tell libev about such cases, libev follows
		1018	the following policy: Each time C<ev_io_set> is being called, libev
		1019	will assume that this is potentially a new file descriptor, otherwise
		1020	it is assumed that the file descriptor stays the same. That means that
		1021	you I<have> to call C<ev_io_set> (or C<ev_io_init>) when you change the
		1022	descriptor even if the file descriptor number itself did not change.
		1023
		1024	This is how one would do it normally anyway, the important point is that
		1025	the libev application should not optimise around libev but should leave
		1026	optimisations to libev.
		1027
		1028	=head3 The special problem of dup'ed file descriptors
		1029
		1030	Some backends (e.g. epoll), cannot register events for file descriptors,
		1031	but only events for the underlying file descriptions. That means when you
		1032	have C<dup ()>'ed file descriptors or weirder constellations, and register
		1033	events for them, only one file descriptor might actually receive events.
		1034
		1035	There is no workaround possible except not registering events
		1036	for potentially C<dup ()>'ed file descriptors, or to resort to
		1037	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
		1038
		1039	=head3 The special problem of fork
		1040
		1041	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit
		1042	useless behaviour. Libev fully supports fork, but needs to be told about
		1043	it in the child.
		1044
		1045	To support fork in your programs, you either have to call
		1046	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,
		1047	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or
		1048	C<EVBACKEND_POLL>.
		1049
		1050
		1051	=head3 Watcher-Specific Functions
		1052
896	=over 4	1053	=over 4
897		1054
898	=item ev_io_init (ev_io *, callback, int fd, int events)	1055	=item ev_io_init (ev_io *, callback, int fd, int events)
899		1056
900	=item ev_io_set (ev_io *, int fd, int events)	1057	=item ev_io_set (ev_io *, int fd, int events)
…		…
910	=item int events [read-only]	1067	=item int events [read-only]
911		1068
912	The events being watched.	1069	The events being watched.
913		1070
914	=back	1071	=back
		1072
		1073	=head3 Examples
915		1074
916	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well	1075	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well
917	readable, but only once. Since it is likely line-buffered, you could	1076	readable, but only once. Since it is likely line-buffered, you could
918	attempt to read a whole line in the callback.	1077	attempt to read a whole line in the callback.
919		1078
…		…
952	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);	1111	ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);
953		1112
954	The callback is guarenteed to be invoked only when its timeout has passed,	1113	The callback is guarenteed to be invoked only when its timeout has passed,
955	but if multiple timers become ready during the same loop iteration then	1114	but if multiple timers become ready during the same loop iteration then
956	order of execution is undefined.	1115	order of execution is undefined.
		1116
		1117	=head3 Watcher-Specific Functions and Data Members
957		1118
958	=over 4	1119	=over 4
959		1120
960	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	1121	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
961		1122
…		…
1015	or C<ev_timer_again> is called and determines the next timeout (if any),	1176	or C<ev_timer_again> is called and determines the next timeout (if any),
1016	which is also when any modifications are taken into account.	1177	which is also when any modifications are taken into account.
1017		1178
1018	=back	1179	=back
1019		1180
		1181	=head3 Examples
		1182
1020	Example: Create a timer that fires after 60 seconds.	1183	Example: Create a timer that fires after 60 seconds.
1021		1184
1022	static void	1185	static void
1023	one_minute_cb (struct ev_loop loop, struct ev_timer w, int revents)	1186	one_minute_cb (struct ev_loop loop, struct ev_timer w, int revents)
1024	{	1187	{
…		…
1057	but on wallclock time (absolute time). You can tell a periodic watcher	1220	but on wallclock time (absolute time). You can tell a periodic watcher
1058	to trigger "at" some specific point in time. For example, if you tell a	1221	to trigger "at" some specific point in time. For example, if you tell a
1059	periodic watcher to trigger in 10 seconds (by specifiying e.g. C<ev_now ()	1222	periodic watcher to trigger in 10 seconds (by specifiying e.g. C<ev_now ()
1060	+ 10.>) and then reset your system clock to the last year, then it will	1223	+ 10.>) and then reset your system clock to the last year, then it will
1061	take a year to trigger the event (unlike an C<ev_timer>, which would trigger	1224	take a year to trigger the event (unlike an C<ev_timer>, which would trigger
1062	roughly 10 seconds later and of course not if you reset your system time	1225	roughly 10 seconds later).
1063	again).
1064		1226
1065	They can also be used to implement vastly more complex timers, such as	1227	They can also be used to implement vastly more complex timers, such as
1066	triggering an event on eahc midnight, local time.	1228	triggering an event on each midnight, local time or other, complicated,
		1229	rules.
1067		1230
1068	As with timers, the callback is guarenteed to be invoked only when the	1231	As with timers, the callback is guarenteed to be invoked only when the
1069	time (C<at>) has been passed, but if multiple periodic timers become ready	1232	time (C<at>) has been passed, but if multiple periodic timers become ready
1070	during the same loop iteration then order of execution is undefined.	1233	during the same loop iteration then order of execution is undefined.
1071		1234
		1235	=head3 Watcher-Specific Functions and Data Members
		1236
1072	=over 4	1237	=over 4
1073		1238
1074	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)	1239	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)
1075		1240
1076	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)	1241	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)
…		…
1078	Lots of arguments, lets sort it out... There are basically three modes of	1243	Lots of arguments, lets sort it out... There are basically three modes of
1079	operation, and we will explain them from simplest to complex:	1244	operation, and we will explain them from simplest to complex:
1080		1245
1081	=over 4	1246	=over 4
1082		1247
1083	=item * absolute timer (interval = reschedule_cb = 0)	1248	=item * absolute timer (at = time, interval = reschedule_cb = 0)
1084		1249
1085	In this configuration the watcher triggers an event at the wallclock time	1250	In this configuration the watcher triggers an event at the wallclock time
1086	C<at> and doesn't repeat. It will not adjust when a time jump occurs,	1251	C<at> and doesn't repeat. It will not adjust when a time jump occurs,
1087	that is, if it is to be run at January 1st 2011 then it will run when the	1252	that is, if it is to be run at January 1st 2011 then it will run when the
1088	system time reaches or surpasses this time.	1253	system time reaches or surpasses this time.
1089		1254
1090	=item * non-repeating interval timer (interval > 0, reschedule_cb = 0)	1255	=item * non-repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)
1091		1256
1092	In this mode the watcher will always be scheduled to time out at the next	1257	In this mode the watcher will always be scheduled to time out at the next
1093	C<at + N * interval> time (for some integer N) and then repeat, regardless	1258	C<at + N * interval> time (for some integer N, which can also be negative)
1094	of any time jumps.	1259	and then repeat, regardless of any time jumps.
1095		1260
1096	This can be used to create timers that do not drift with respect to system	1261	This can be used to create timers that do not drift with respect to system
1097	time:	1262	time:
1098		1263
1099	ev_periodic_set (&periodic, 0., 3600., 0);	1264	ev_periodic_set (&periodic, 0., 3600., 0);
…		…
1105		1270
1106	Another way to think about it (for the mathematically inclined) is that	1271	Another way to think about it (for the mathematically inclined) is that
1107	C<ev_periodic> will try to run the callback in this mode at the next possible	1272	C<ev_periodic> will try to run the callback in this mode at the next possible
1108	time where C<time = at (mod interval)>, regardless of any time jumps.	1273	time where C<time = at (mod interval)>, regardless of any time jumps.
1109		1274
		1275	For numerical stability it is preferable that the C<at> value is near
		1276	C<ev_now ()> (the current time), but there is no range requirement for
		1277	this value.
		1278
1110	=item * manual reschedule mode (reschedule_cb = callback)	1279	=item * manual reschedule mode (at and interval ignored, reschedule_cb = callback)
1111		1280
1112	In this mode the values for C<interval> and C<at> are both being	1281	In this mode the values for C<interval> and C<at> are both being
1113	ignored. Instead, each time the periodic watcher gets scheduled, the	1282	ignored. Instead, each time the periodic watcher gets scheduled, the
1114	reschedule callback will be called with the watcher as first, and the	1283	reschedule callback will be called with the watcher as first, and the
1115	current time as second argument.	1284	current time as second argument.
1116		1285
1117	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,	1286	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,
1118	ever, or make any event loop modifications>. If you need to stop it,	1287	ever, or make any event loop modifications>. If you need to stop it,
1119	return C<now + 1e30> (or so, fudge fudge) and stop it afterwards (e.g. by	1288	return C<now + 1e30> (or so, fudge fudge) and stop it afterwards (e.g. by
1120	starting a prepare watcher).	1289	starting an C<ev_prepare> watcher, which is legal).
1121		1290
1122	Its prototype is C<ev_tstamp (reschedule_cb)(struct ev_periodic w,	1291	Its prototype is C<ev_tstamp (reschedule_cb)(struct ev_periodic w,
1123	ev_tstamp now)>, e.g.:	1292	ev_tstamp now)>, e.g.:
1124		1293
1125	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)	1294	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)
…		…
1148	Simply stops and restarts the periodic watcher again. This is only useful	1317	Simply stops and restarts the periodic watcher again. This is only useful
1149	when you changed some parameters or the reschedule callback would return	1318	when you changed some parameters or the reschedule callback would return
1150	a different time than the last time it was called (e.g. in a crond like	1319	a different time than the last time it was called (e.g. in a crond like
1151	program when the crontabs have changed).	1320	program when the crontabs have changed).
1152		1321
		1322	=item ev_tstamp offset [read-write]
		1323
		1324	When repeating, this contains the offset value, otherwise this is the
		1325	absolute point in time (the C<at> value passed to C<ev_periodic_set>).
		1326
		1327	Can be modified any time, but changes only take effect when the periodic
		1328	timer fires or C<ev_periodic_again> is being called.
		1329
1153	=item ev_tstamp interval [read-write]	1330	=item ev_tstamp interval [read-write]
1154		1331
1155	The current interval value. Can be modified any time, but changes only	1332	The current interval value. Can be modified any time, but changes only
1156	take effect when the periodic timer fires or C<ev_periodic_again> is being	1333	take effect when the periodic timer fires or C<ev_periodic_again> is being
1157	called.	1334	called.
…		…
1160		1337
1161	The current reschedule callback, or C<0>, if this functionality is	1338	The current reschedule callback, or C<0>, if this functionality is
1162	switched off. Can be changed any time, but changes only take effect when	1339	switched off. Can be changed any time, but changes only take effect when
1163	the periodic timer fires or C<ev_periodic_again> is being called.	1340	the periodic timer fires or C<ev_periodic_again> is being called.
1164		1341
		1342	=item ev_tstamp at [read-only]
		1343
		1344	When active, contains the absolute time that the watcher is supposed to
		1345	trigger next.
		1346
1165	=back	1347	=back
		1348
		1349	=head3 Examples
1166		1350
1167	Example: Call a callback every hour, or, more precisely, whenever the	1351	Example: Call a callback every hour, or, more precisely, whenever the
1168	system clock is divisible by 3600. The callback invocation times have	1352	system clock is divisible by 3600. The callback invocation times have
1169	potentially a lot of jittering, but good long-term stability.	1353	potentially a lot of jittering, but good long-term stability.
1170		1354
…		…
1210	with the kernel (thus it coexists with your own signal handlers as long	1394	with the kernel (thus it coexists with your own signal handlers as long
1211	as you don't register any with libev). Similarly, when the last signal	1395	as you don't register any with libev). Similarly, when the last signal
1212	watcher for a signal is stopped libev will reset the signal handler to	1396	watcher for a signal is stopped libev will reset the signal handler to
1213	SIG_DFL (regardless of what it was set to before).	1397	SIG_DFL (regardless of what it was set to before).
1214		1398
		1399	=head3 Watcher-Specific Functions and Data Members
		1400
1215	=over 4	1401	=over 4
1216		1402
1217	=item ev_signal_init (ev_signal *, callback, int signum)	1403	=item ev_signal_init (ev_signal *, callback, int signum)
1218		1404
1219	=item ev_signal_set (ev_signal *, int signum)	1405	=item ev_signal_set (ev_signal *, int signum)
…		…
1230		1416
1231	=head2 C<ev_child> - watch out for process status changes	1417	=head2 C<ev_child> - watch out for process status changes
1232		1418
1233	Child watchers trigger when your process receives a SIGCHLD in response to	1419	Child watchers trigger when your process receives a SIGCHLD in response to
1234	some child status changes (most typically when a child of yours dies).	1420	some child status changes (most typically when a child of yours dies).
		1421
		1422	=head3 Watcher-Specific Functions and Data Members
1235		1423
1236	=over 4	1424	=over 4
1237		1425
1238	=item ev_child_init (ev_child *, callback, int pid)	1426	=item ev_child_init (ev_child *, callback, int pid)
1239		1427
…		…
1258		1446
1259	The process exit/trace status caused by C<rpid> (see your systems	1447	The process exit/trace status caused by C<rpid> (see your systems
1260	C<waitpid> and C<sys/wait.h> documentation for details).	1448	C<waitpid> and C<sys/wait.h> documentation for details).
1261		1449
1262	=back	1450	=back
		1451
		1452	=head3 Examples
1263		1453
1264	Example: Try to exit cleanly on SIGINT and SIGTERM.	1454	Example: Try to exit cleanly on SIGINT and SIGTERM.
1265		1455
1266	static void	1456	static void
1267	sigint_cb (struct ev_loop loop, struct ev_signal w, int revents)	1457	sigint_cb (struct ev_loop loop, struct ev_signal w, int revents)
…		…
1308	semantics of C<ev_stat> watchers, which means that libev sometimes needs	1498	semantics of C<ev_stat> watchers, which means that libev sometimes needs
1309	to fall back to regular polling again even with inotify, but changes are	1499	to fall back to regular polling again even with inotify, but changes are
1310	usually detected immediately, and if the file exists there will be no	1500	usually detected immediately, and if the file exists there will be no
1311	polling.	1501	polling.
1312		1502
		1503	=head3 Inotify
		1504
		1505	When C<inotify (7)> support has been compiled into libev (generally only
		1506	available on Linux) and present at runtime, it will be used to speed up
		1507	change detection where possible. The inotify descriptor will be created lazily
		1508	when the first C<ev_stat> watcher is being started.
		1509
		1510	Inotify presense does not change the semantics of C<ev_stat> watchers
		1511	except that changes might be detected earlier, and in some cases, to avoid
		1512	making regular C<stat> calls. Even in the presense of inotify support
		1513	there are many cases where libev has to resort to regular C<stat> polling.
		1514
		1515	(There is no support for kqueue, as apparently it cannot be used to
		1516	implement this functionality, due to the requirement of having a file
		1517	descriptor open on the object at all times).
		1518
		1519	=head3 The special problem of stat time resolution
		1520
		1521	The C<stat ()> syscall only supports full-second resolution portably, and
		1522	even on systems where the resolution is higher, many filesystems still
		1523	only support whole seconds.
		1524
		1525	That means that, if the time is the only thing that changes, you might
		1526	miss updates: on the first update, C<ev_stat> detects a change and calls
		1527	your callback, which does something. When there is another update within
		1528	the same second, C<ev_stat> will be unable to detect it.
		1529
		1530	The solution to this is to delay acting on a change for a second (or till
		1531	the next second boundary), using a roughly one-second delay C<ev_timer>
		1532	(C<ev_timer_set (w, 0., 1.01); ev_timer_again (loop, w)>). The C<.01>
		1533	is added to work around small timing inconsistencies of some operating
		1534	systems.
		1535
		1536	=head3 Watcher-Specific Functions and Data Members
		1537
1313	=over 4	1538	=over 4
1314		1539
1315	=item ev_stat_init (ev_stat , callback, const char path, ev_tstamp interval)	1540	=item ev_stat_init (ev_stat , callback, const char path, ev_tstamp interval)
1316		1541
1317	=item ev_stat_set (ev_stat , const char path, ev_tstamp interval)	1542	=item ev_stat_set (ev_stat , const char path, ev_tstamp interval)
…		…
1352	=item const char *path [read-only]	1577	=item const char *path [read-only]
1353		1578
1354	The filesystem path that is being watched.	1579	The filesystem path that is being watched.
1355		1580
1356	=back	1581	=back
		1582
		1583	=head3 Examples
1357		1584
1358	Example: Watch C</etc/passwd> for attribute changes.	1585	Example: Watch C</etc/passwd> for attribute changes.
1359		1586
1360	static void	1587	static void
1361	passwd_cb (struct ev_loop loop, ev_stat w, int revents)	1588	passwd_cb (struct ev_loop loop, ev_stat w, int revents)
…		…
1374	}	1601	}
1375		1602
1376	...	1603	...
1377	ev_stat passwd;	1604	ev_stat passwd;
1378		1605
1379	ev_stat_init (&passwd, passwd_cb, "/etc/passwd");	1606	ev_stat_init (&passwd, passwd_cb, "/etc/passwd", 0.);
1380	ev_stat_start (loop, &passwd);	1607	ev_stat_start (loop, &passwd);
		1608
		1609	Example: Like above, but additionally use a one-second delay so we do not
		1610	miss updates (however, frequent updates will delay processing, too, so
		1611	one might do the work both on C<ev_stat> callback invocation I<and> on
		1612	C<ev_timer> callback invocation).
		1613
		1614	static ev_stat passwd;
		1615	static ev_timer timer;
		1616
		1617	static void
		1618	timer_cb (EV_P_ ev_timer *w, int revents)
		1619	{
		1620	ev_timer_stop (EV_A_ w);
		1621
		1622	/* now it's one second after the most recent passwd change */
		1623	}
		1624
		1625	static void
		1626	stat_cb (EV_P_ ev_stat *w, int revents)
		1627	{
		1628	/* reset the one-second timer */
		1629	ev_timer_again (EV_A_ &timer);
		1630	}
		1631
		1632	...
		1633	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);
		1634	ev_stat_start (loop, &passwd);
		1635	ev_timer_init (&timer, timer_cb, 0., 1.01);
1381		1636
1382		1637
1383	=head2 C<ev_idle> - when you've got nothing better to do...	1638	=head2 C<ev_idle> - when you've got nothing better to do...
1384		1639
1385	Idle watchers trigger events when no other events of the same or higher	1640	Idle watchers trigger events when no other events of the same or higher
…		…
1399	Apart from keeping your process non-blocking (which is a useful	1654	Apart from keeping your process non-blocking (which is a useful
1400	effect on its own sometimes), idle watchers are a good place to do	1655	effect on its own sometimes), idle watchers are a good place to do
1401	"pseudo-background processing", or delay processing stuff to after the	1656	"pseudo-background processing", or delay processing stuff to after the
1402	event loop has handled all outstanding events.	1657	event loop has handled all outstanding events.
1403		1658
		1659	=head3 Watcher-Specific Functions and Data Members
		1660
1404	=over 4	1661	=over 4
1405		1662
1406	=item ev_idle_init (ev_signal *, callback)	1663	=item ev_idle_init (ev_signal *, callback)
1407		1664
1408	Initialises and configures the idle watcher - it has no parameters of any	1665	Initialises and configures the idle watcher - it has no parameters of any
1409	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,	1666	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,
1410	believe me.	1667	believe me.
1411		1668
1412	=back	1669	=back
		1670
		1671	=head3 Examples
1413		1672
1414	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the	1673	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the
1415	callback, free it. Also, use no error checking, as usual.	1674	callback, free it. Also, use no error checking, as usual.
1416		1675
1417	static void	1676	static void
…		…
1465	with priority higher than or equal to the event loop and one coroutine	1724	with priority higher than or equal to the event loop and one coroutine
1466	of lower priority, but only once, using idle watchers to keep the event	1725	of lower priority, but only once, using idle watchers to keep the event
1467	loop from blocking if lower-priority coroutines are active, thus mapping	1726	loop from blocking if lower-priority coroutines are active, thus mapping
1468	low-priority coroutines to idle/background tasks).	1727	low-priority coroutines to idle/background tasks).
1469		1728
		1729	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)
		1730	priority, to ensure that they are being run before any other watchers
		1731	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,
		1732	too) should not activate ("feed") events into libev. While libev fully
		1733	supports this, they will be called before other C<ev_check> watchers
		1734	did their job. As C<ev_check> watchers are often used to embed other
		1735	(non-libev) event loops those other event loops might be in an unusable
		1736	state until their C<ev_check> watcher ran (always remind yourself to
		1737	coexist peacefully with others).
		1738
		1739	=head3 Watcher-Specific Functions and Data Members
		1740
1470	=over 4	1741	=over 4
1471		1742
1472	=item ev_prepare_init (ev_prepare *, callback)	1743	=item ev_prepare_init (ev_prepare *, callback)
1473		1744
1474	=item ev_check_init (ev_check *, callback)	1745	=item ev_check_init (ev_check *, callback)
…		…
1477	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>	1748	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>
1478	macros, but using them is utterly, utterly and completely pointless.	1749	macros, but using them is utterly, utterly and completely pointless.
1479		1750
1480	=back	1751	=back
1481		1752
1482	Example: To include a library such as adns, you would add IO watchers	1753	=head3 Examples
1483	and a timeout watcher in a prepare handler, as required by libadns, and	1754
		1755	There are a number of principal ways to embed other event loops or modules
		1756	into libev. Here are some ideas on how to include libadns into libev
		1757	(there is a Perl module named C<EV::ADNS> that does this, which you could
		1758	use for an actually working example. Another Perl module named C<EV::Glib>
		1759	embeds a Glib main context into libev, and finally, C<Glib::EV> embeds EV
		1760	into the Glib event loop).
		1761
		1762	Method 1: Add IO watchers and a timeout watcher in a prepare handler,
1484	in a check watcher, destroy them and call into libadns. What follows is	1763	and in a check watcher, destroy them and call into libadns. What follows
1485	pseudo-code only of course:	1764	is pseudo-code only of course. This requires you to either use a low
		1765	priority for the check watcher or use C<ev_clear_pending> explicitly, as
		1766	the callbacks for the IO/timeout watchers might not have been called yet.
1486		1767
1487	static ev_io iow [nfd];	1768	static ev_io iow [nfd];
1488	static ev_timer tw;	1769	static ev_timer tw;
1489		1770
1490	static void	1771	static void
1491	io_cb (ev_loop loop, ev_io w, int revents)	1772	io_cb (ev_loop loop, ev_io w, int revents)
1492	{	1773	{
1493	// set the relevant poll flags
1494	// could also call adns_processreadable etc. here
1495	struct pollfd fd = (struct pollfd )w->data;
1496	if (revents & EV_READ ) fd->revents \|= fd->events & POLLIN;
1497	if (revents & EV_WRITE) fd->revents \|= fd->events & POLLOUT;
1498	}	1774	}
1499		1775
1500	// create io watchers for each fd and a timer before blocking	1776	// create io watchers for each fd and a timer before blocking
1501	static void	1777	static void
1502	adns_prepare_cb (ev_loop loop, ev_prepare w, int revents)	1778	adns_prepare_cb (ev_loop loop, ev_prepare w, int revents)
…		…
1508		1784
1509	/* the callback is illegal, but won't be called as we stop during check */	1785	/* the callback is illegal, but won't be called as we stop during check */
1510	ev_timer_init (&tw, 0, timeout * 1e-3);	1786	ev_timer_init (&tw, 0, timeout * 1e-3);
1511	ev_timer_start (loop, &tw);	1787	ev_timer_start (loop, &tw);
1512		1788
1513	// create on ev_io per pollfd	1789	// create one ev_io per pollfd
1514	for (int i = 0; i < nfd; ++i)	1790	for (int i = 0; i < nfd; ++i)
1515	{	1791	{
1516	ev_io_init (iow + i, io_cb, fds [i].fd,	1792	ev_io_init (iow + i, io_cb, fds [i].fd,
1517	((fds [i].events & POLLIN ? EV_READ : 0)	1793	((fds [i].events & POLLIN ? EV_READ : 0)
1518	\| (fds [i].events & POLLOUT ? EV_WRITE : 0)));	1794	\| (fds [i].events & POLLOUT ? EV_WRITE : 0)));
1519		1795
1520	fds [i].revents = 0;	1796	fds [i].revents = 0;
1521	iow [i].data = fds + i;
1522	ev_io_start (loop, iow + i);	1797	ev_io_start (loop, iow + i);
1523	}	1798	}
1524	}	1799	}
1525		1800
1526	// stop all watchers after blocking	1801	// stop all watchers after blocking
…		…
1528	adns_check_cb (ev_loop loop, ev_check w, int revents)	1803	adns_check_cb (ev_loop loop, ev_check w, int revents)
1529	{	1804	{
1530	ev_timer_stop (loop, &tw);	1805	ev_timer_stop (loop, &tw);
1531		1806
1532	for (int i = 0; i < nfd; ++i)	1807	for (int i = 0; i < nfd; ++i)
		1808	{
		1809	// set the relevant poll flags
		1810	// could also call adns_processreadable etc. here
		1811	struct pollfd *fd = fds + i;
		1812	int revents = ev_clear_pending (iow + i);
		1813	if (revents & EV_READ ) fd->revents \|= fd->events & POLLIN;
		1814	if (revents & EV_WRITE) fd->revents \|= fd->events & POLLOUT;
		1815
		1816	// now stop the watcher
1533	ev_io_stop (loop, iow + i);	1817	ev_io_stop (loop, iow + i);
		1818	}
1534		1819
1535	adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));	1820	adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));
		1821	}
		1822
		1823	Method 2: This would be just like method 1, but you run C<adns_afterpoll>
		1824	in the prepare watcher and would dispose of the check watcher.
		1825
		1826	Method 3: If the module to be embedded supports explicit event
		1827	notification (adns does), you can also make use of the actual watcher
		1828	callbacks, and only destroy/create the watchers in the prepare watcher.
		1829
		1830	static void
		1831	timer_cb (EV_P_ ev_timer *w, int revents)
		1832	{
		1833	adns_state ads = (adns_state)w->data;
		1834	update_now (EV_A);
		1835
		1836	adns_processtimeouts (ads, &tv_now);
		1837	}
		1838
		1839	static void
		1840	io_cb (EV_P_ ev_io *w, int revents)
		1841	{
		1842	adns_state ads = (adns_state)w->data;
		1843	update_now (EV_A);
		1844
		1845	if (revents & EV_READ ) adns_processreadable (ads, w->fd, &tv_now);
		1846	if (revents & EV_WRITE) adns_processwriteable (ads, w->fd, &tv_now);
		1847	}
		1848
		1849	// do not ever call adns_afterpoll
		1850
		1851	Method 4: Do not use a prepare or check watcher because the module you
		1852	want to embed is too inflexible to support it. Instead, youc na override
		1853	their poll function. The drawback with this solution is that the main
		1854	loop is now no longer controllable by EV. The C<Glib::EV> module does
		1855	this.
		1856
		1857	static gint
		1858	event_poll_func (GPollFD *fds, guint nfds, gint timeout)
		1859	{
		1860	int got_events = 0;
		1861
		1862	for (n = 0; n < nfds; ++n)
		1863	// create/start io watcher that sets the relevant bits in fds[n] and increment got_events
		1864
		1865	if (timeout >= 0)
		1866	// create/start timer
		1867
		1868	// poll
		1869	ev_loop (EV_A_ 0);
		1870
		1871	// stop timer again
		1872	if (timeout >= 0)
		1873	ev_timer_stop (EV_A_ &to);
		1874
		1875	// stop io watchers again - their callbacks should have set
		1876	for (n = 0; n < nfds; ++n)
		1877	ev_io_stop (EV_A_ iow [n]);
		1878
		1879	return got_events;
1536	}	1880	}
1537		1881
1538		1882
1539	=head2 C<ev_embed> - when one backend isn't enough...	1883	=head2 C<ev_embed> - when one backend isn't enough...
1540		1884
…		…
1583	portable one.	1927	portable one.
1584		1928
1585	So when you want to use this feature you will always have to be prepared	1929	So when you want to use this feature you will always have to be prepared
1586	that you cannot get an embeddable loop. The recommended way to get around	1930	that you cannot get an embeddable loop. The recommended way to get around
1587	this is to have a separate variables for your embeddable loop, try to	1931	this is to have a separate variables for your embeddable loop, try to
1588	create it, and if that fails, use the normal loop for everything:	1932	create it, and if that fails, use the normal loop for everything.
		1933
		1934	=head3 Watcher-Specific Functions and Data Members
		1935
		1936	=over 4
		1937
		1938	=item ev_embed_init (ev_embed , callback, struct ev_loop embedded_loop)
		1939
		1940	=item ev_embed_set (ev_embed , callback, struct ev_loop embedded_loop)
		1941
		1942	Configures the watcher to embed the given loop, which must be
		1943	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
		1944	invoked automatically, otherwise it is the responsibility of the callback
		1945	to invoke it (it will continue to be called until the sweep has been done,
		1946	if you do not want thta, you need to temporarily stop the embed watcher).
		1947
		1948	=item ev_embed_sweep (loop, ev_embed *)
		1949
		1950	Make a single, non-blocking sweep over the embedded loop. This works
		1951	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
		1952	apropriate way for embedded loops.
		1953
		1954	=item struct ev_loop *other [read-only]
		1955
		1956	The embedded event loop.
		1957
		1958	=back
		1959
		1960	=head3 Examples
		1961
		1962	Example: Try to get an embeddable event loop and embed it into the default
		1963	event loop. If that is not possible, use the default loop. The default
		1964	loop is stored in C<loop_hi>, while the mebeddable loop is stored in
		1965	C<loop_lo> (which is C<loop_hi> in the acse no embeddable loop can be
		1966	used).
1589		1967
1590	struct ev_loop *loop_hi = ev_default_init (0);	1968	struct ev_loop *loop_hi = ev_default_init (0);
1591	struct ev_loop *loop_lo = 0;	1969	struct ev_loop *loop_lo = 0;
1592	struct ev_embed embed;	1970	struct ev_embed embed;
1593		1971
…		…
1604	ev_embed_start (loop_hi, &embed);	1982	ev_embed_start (loop_hi, &embed);
1605	}	1983	}
1606	else	1984	else
1607	loop_lo = loop_hi;	1985	loop_lo = loop_hi;
1608		1986
1609	=over 4	1987	Example: Check if kqueue is available but not recommended and create
		1988	a kqueue backend for use with sockets (which usually work with any
		1989	kqueue implementation). Store the kqueue/socket-only event loop in
		1990	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
1610		1991
1611	=item ev_embed_init (ev_embed , callback, struct ev_loop embedded_loop)	1992	struct ev_loop *loop = ev_default_init (0);
		1993	struct ev_loop *loop_socket = 0;
		1994	struct ev_embed embed;
		1995
		1996	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
		1997	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
		1998	{
		1999	ev_embed_init (&embed, 0, loop_socket);
		2000	ev_embed_start (loop, &embed);
		2001	}
1612		2002
1613	=item ev_embed_set (ev_embed , callback, struct ev_loop embedded_loop)	2003	if (!loop_socket)
		2004	loop_socket = loop;
1614		2005
1615	Configures the watcher to embed the given loop, which must be	2006	// now use loop_socket for all sockets, and loop for everything else
1616	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
1617	invoked automatically, otherwise it is the responsibility of the callback
1618	to invoke it (it will continue to be called until the sweep has been done,
1619	if you do not want thta, you need to temporarily stop the embed watcher).
1620
1621	=item ev_embed_sweep (loop, ev_embed *)
1622
1623	Make a single, non-blocking sweep over the embedded loop. This works
1624	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
1625	apropriate way for embedded loops.
1626
1627	=item struct ev_loop *loop [read-only]
1628
1629	The embedded event loop.
1630
1631	=back
1632		2007
1633		2008
1634	=head2 C<ev_fork> - the audacity to resume the event loop after a fork	2009	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
1635		2010
1636	Fork watchers are called when a C<fork ()> was detected (usually because	2011	Fork watchers are called when a C<fork ()> was detected (usually because
…		…
1639	event loop blocks next and before C<ev_check> watchers are being called,	2014	event loop blocks next and before C<ev_check> watchers are being called,
1640	and only in the child after the fork. If whoever good citizen calling	2015	and only in the child after the fork. If whoever good citizen calling
1641	C<ev_default_fork> cheats and calls it in the wrong process, the fork	2016	C<ev_default_fork> cheats and calls it in the wrong process, the fork
1642	handlers will be invoked, too, of course.	2017	handlers will be invoked, too, of course.
1643		2018
		2019	=head3 Watcher-Specific Functions and Data Members
		2020
1644	=over 4	2021	=over 4
1645		2022
1646	=item ev_fork_init (ev_signal *, callback)	2023	=item ev_fork_init (ev_signal *, callback)
1647		2024
1648	Initialises and configures the fork watcher - it has no parameters of any	2025	Initialises and configures the fork watcher - it has no parameters of any
…		…
1828		2205
1829	myclass obj;	2206	myclass obj;
1830	ev::io iow;	2207	ev::io iow;
1831	iow.set <myclass, &myclass::io_cb> (&obj);	2208	iow.set <myclass, &myclass::io_cb> (&obj);
1832		2209
1833	=item w->set (void (function)(watcher &w, int), void data = 0)	2210	=item w->set<function> (void *data = 0)
1834		2211
1835	Also sets a callback, but uses a static method or plain function as	2212	Also sets a callback, but uses a static method or plain function as
1836	callback. The optional C<data> argument will be stored in the watcher's	2213	callback. The optional C<data> argument will be stored in the watcher's
1837	C<data> member and is free for you to use.	2214	C<data> member and is free for you to use.
1838		2215
		2216	The prototype of the C<function> must be C<void (*)(ev::TYPE &w, int)>.
		2217
1839	See the method-C<set> above for more details.	2218	See the method-C<set> above for more details.
		2219
		2220	Example:
		2221
		2222	static void io_cb (ev::io &w, int revents) { }
		2223	iow.set <io_cb> ();
1840		2224
1841	=item w->set (struct ev_loop *)	2225	=item w->set (struct ev_loop *)
1842		2226
1843	Associates a different C<struct ev_loop> with this watcher. You can only	2227	Associates a different C<struct ev_loop> with this watcher. You can only
1844	do this when the watcher is inactive (and not pending either).	2228	do this when the watcher is inactive (and not pending either).
…		…
1857		2241
1858	=item w->stop ()	2242	=item w->stop ()
1859		2243
1860	Stops the watcher if it is active. Again, no C<loop> argument.	2244	Stops the watcher if it is active. Again, no C<loop> argument.
1861		2245
1862	=item w->again () C<ev::timer>, C<ev::periodic> only	2246	=item w->again () (C<ev::timer>, C<ev::periodic> only)
1863		2247
1864	For C<ev::timer> and C<ev::periodic>, this invokes the corresponding	2248	For C<ev::timer> and C<ev::periodic>, this invokes the corresponding
1865	C<ev_TYPE_again> function.	2249	C<ev_TYPE_again> function.
1866		2250
1867	=item w->sweep () C<ev::embed> only	2251	=item w->sweep () (C<ev::embed> only)
1868		2252
1869	Invokes C<ev_embed_sweep>.	2253	Invokes C<ev_embed_sweep>.
1870		2254
1871	=item w->update () C<ev::stat> only	2255	=item w->update () (C<ev::stat> only)
1872		2256
1873	Invokes C<ev_stat_stat>.	2257	Invokes C<ev_stat_stat>.
1874		2258
1875	=back	2259	=back
1876		2260
…		…
1896	}	2280	}
1897		2281
1898		2282
1899	=head1 MACRO MAGIC	2283	=head1 MACRO MAGIC
1900		2284
1901	Libev can be compiled with a variety of options, the most fundemantal is	2285	Libev can be compiled with a variety of options, the most fundamantal
1902	C<EV_MULTIPLICITY>. This option determines whether (most) functions and	2286	of which is C<EV_MULTIPLICITY>. This option determines whether (most)
1903	callbacks have an initial C<struct ev_loop *> argument.	2287	functions and callbacks have an initial C<struct ev_loop *> argument.
1904		2288
1905	To make it easier to write programs that cope with either variant, the	2289	To make it easier to write programs that cope with either variant, the
1906	following macros are defined:	2290	following macros are defined:
1907		2291
1908	=over 4	2292	=over 4
…		…
1962	Libev can (and often is) directly embedded into host	2346	Libev can (and often is) directly embedded into host
1963	applications. Examples of applications that embed it include the Deliantra	2347	applications. Examples of applications that embed it include the Deliantra
1964	Game Server, the EV perl module, the GNU Virtual Private Ethernet (gvpe)	2348	Game Server, the EV perl module, the GNU Virtual Private Ethernet (gvpe)
1965	and rxvt-unicode.	2349	and rxvt-unicode.
1966		2350
1967	The goal is to enable you to just copy the neecssary files into your	2351	The goal is to enable you to just copy the necessary files into your
1968	source directory without having to change even a single line in them, so	2352	source directory without having to change even a single line in them, so
1969	you can easily upgrade by simply copying (or having a checked-out copy of	2353	you can easily upgrade by simply copying (or having a checked-out copy of
1970	libev somewhere in your source tree).	2354	libev somewhere in your source tree).
1971		2355
1972	=head2 FILESETS	2356	=head2 FILESETS
…		…
2062		2446
2063	If defined to be C<1>, libev will try to detect the availability of the	2447	If defined to be C<1>, libev will try to detect the availability of the
2064	monotonic clock option at both compiletime and runtime. Otherwise no use	2448	monotonic clock option at both compiletime and runtime. Otherwise no use
2065	of the monotonic clock option will be attempted. If you enable this, you	2449	of the monotonic clock option will be attempted. If you enable this, you
2066	usually have to link against librt or something similar. Enabling it when	2450	usually have to link against librt or something similar. Enabling it when
2067	the functionality isn't available is safe, though, althoguh you have	2451	the functionality isn't available is safe, though, although you have
2068	to make sure you link against any libraries where the C<clock_gettime>	2452	to make sure you link against any libraries where the C<clock_gettime>
2069	function is hiding in (often F<-lrt>).	2453	function is hiding in (often F<-lrt>).
2070		2454
2071	=item EV_USE_REALTIME	2455	=item EV_USE_REALTIME
2072		2456
2073	If defined to be C<1>, libev will try to detect the availability of the	2457	If defined to be C<1>, libev will try to detect the availability of the
2074	realtime clock option at compiletime (and assume its availability at	2458	realtime clock option at compiletime (and assume its availability at
2075	runtime if successful). Otherwise no use of the realtime clock option will	2459	runtime if successful). Otherwise no use of the realtime clock option will
2076	be attempted. This effectively replaces C<gettimeofday> by C<clock_get	2460	be attempted. This effectively replaces C<gettimeofday> by C<clock_get
2077	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See tzhe note about libraries	2461	(CLOCK_REALTIME, ...)> and will not normally affect correctness. See the
2078	in the description of C<EV_USE_MONOTONIC>, though.	2462	note about libraries in the description of C<EV_USE_MONOTONIC>, though.
		2463
		2464	=item EV_USE_NANOSLEEP
		2465
		2466	If defined to be C<1>, libev will assume that C<nanosleep ()> is available
		2467	and will use it for delays. Otherwise it will use C<select ()>.
2079		2468
2080	=item EV_USE_SELECT	2469	=item EV_USE_SELECT
2081		2470
2082	If undefined or defined to be C<1>, libev will compile in support for the	2471	If undefined or defined to be C<1>, libev will compile in support for the
2083	C<select>(2) backend. No attempt at autodetection will be done: if no	2472	C<select>(2) backend. No attempt at autodetection will be done: if no
…		…
2147	be detected at runtime.	2536	be detected at runtime.
2148		2537
2149	=item EV_H	2538	=item EV_H
2150		2539
2151	The name of the F<ev.h> header file used to include it. The default if	2540	The name of the F<ev.h> header file used to include it. The default if
2152	undefined is C<< <ev.h> >> in F<event.h> and C<"ev.h"> in F<ev.c>. This	2541	undefined is C<"ev.h"> in F<event.h> and F<ev.c>. This can be used to
2153	can be used to virtually rename the F<ev.h> header file in case of conflicts.	2542	virtually rename the F<ev.h> header file in case of conflicts.
2154		2543
2155	=item EV_CONFIG_H	2544	=item EV_CONFIG_H
2156		2545
2157	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	2546	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
2158	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	2547	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
2159	C<EV_H>, above.	2548	C<EV_H>, above.
2160		2549
2161	=item EV_EVENT_H	2550	=item EV_EVENT_H
2162		2551
2163	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	2552	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
2164	of how the F<event.h> header can be found.	2553	of how the F<event.h> header can be found, the dfeault is C<"event.h">.
2165		2554
2166	=item EV_PROTOTYPES	2555	=item EV_PROTOTYPES
2167		2556
2168	If defined to be C<0>, then F<ev.h> will not define any function	2557	If defined to be C<0>, then F<ev.h> will not define any function
2169	prototypes, but still define all the structs and other symbols. This is	2558	prototypes, but still define all the structs and other symbols. This is
…		…
2235	than enough. If you need to manage thousands of children you might want to	2624	than enough. If you need to manage thousands of children you might want to
2236	increase this value (I<must> be a power of two).	2625	increase this value (I<must> be a power of two).
2237		2626
2238	=item EV_INOTIFY_HASHSIZE	2627	=item EV_INOTIFY_HASHSIZE
2239		2628
2240	C<ev_staz> watchers use a small hash table to distribute workload by	2629	C<ev_stat> watchers use a small hash table to distribute workload by
2241	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	2630	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),
2242	usually more than enough. If you need to manage thousands of C<ev_stat>	2631	usually more than enough. If you need to manage thousands of C<ev_stat>
2243	watchers you might want to increase this value (I<must> be a power of	2632	watchers you might want to increase this value (I<must> be a power of
2244	two).	2633	two).
2245		2634
…		…
2262		2651
2263	=item ev_set_cb (ev, cb)	2652	=item ev_set_cb (ev, cb)
2264		2653
2265	Can be used to change the callback member declaration in each watcher,	2654	Can be used to change the callback member declaration in each watcher,
2266	and the way callbacks are invoked and set. Must expand to a struct member	2655	and the way callbacks are invoked and set. Must expand to a struct member
2267	definition and a statement, respectively. See the F<ev.v> header file for	2656	definition and a statement, respectively. See the F<ev.h> header file for
2268	their default definitions. One possible use for overriding these is to	2657	their default definitions. One possible use for overriding these is to
2269	avoid the C<struct ev_loop *> as first argument in all cases, or to use	2658	avoid the C<struct ev_loop *> as first argument in all cases, or to use
2270	method calls instead of plain function calls in C++.	2659	method calls instead of plain function calls in C++.
		2660
		2661	=head2 EXPORTED API SYMBOLS
		2662
		2663	If you need to re-export the API (e.g. via a dll) and you need a list of
		2664	exported symbols, you can use the provided F<Symbol.*> files which list
		2665	all public symbols, one per line:
		2666
		2667	Symbols.ev for libev proper
		2668	Symbols.event for the libevent emulation
		2669
		2670	This can also be used to rename all public symbols to avoid clashes with
		2671	multiple versions of libev linked together (which is obviously bad in
		2672	itself, but sometimes it is inconvinient to avoid this).
		2673
		2674	A sed command like this will create wrapper C<#define>'s that you need to
		2675	include before including F<ev.h>:
		2676
		2677	<Symbols.ev sed -e "s/.*/#define & myprefix_&/" >wrap.h
		2678
		2679	This would create a file F<wrap.h> which essentially looks like this:
		2680
		2681	#define ev_backend myprefix_ev_backend
		2682	#define ev_check_start myprefix_ev_check_start
		2683	#define ev_check_stop myprefix_ev_check_stop
		2684	...
2271		2685
2272	=head2 EXAMPLES	2686	=head2 EXAMPLES
2273		2687
2274	For a real-world example of a program the includes libev	2688	For a real-world example of a program the includes libev
2275	verbatim, you can have a look at the EV perl module	2689	verbatim, you can have a look at the EV perl module
…		…
2316		2730
2317	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)	2731	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)
2318		2732
2319	This means that, when you have a watcher that triggers in one hour and	2733	This means that, when you have a watcher that triggers in one hour and
2320	there are 100 watchers that would trigger before that then inserting will	2734	there are 100 watchers that would trigger before that then inserting will
2321	have to skip those 100 watchers.	2735	have to skip roughly seven (C<ld 100>) of these watchers.
2322		2736
2323	=item Changing timer/periodic watchers (by autorepeat, again): O(log skipped_other_timers)	2737	=item Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)
2324		2738
2325	That means that for changing a timer costs less than removing/adding them	2739	That means that changing a timer costs less than removing/adding them
2326	as only the relative motion in the event queue has to be paid for.	2740	as only the relative motion in the event queue has to be paid for.
2327		2741
2328	=item Starting io/check/prepare/idle/signal/child watchers: O(1)	2742	=item Starting io/check/prepare/idle/signal/child watchers: O(1)
2329		2743
2330	These just add the watcher into an array or at the head of a list.	2744	These just add the watcher into an array or at the head of a list.
		2745
2331	=item Stopping check/prepare/idle watchers: O(1)	2746	=item Stopping check/prepare/idle watchers: O(1)
2332		2747
2333	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))	2748	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
2334		2749
2335	These watchers are stored in lists then need to be walked to find the	2750	These watchers are stored in lists then need to be walked to find the
2336	correct watcher to remove. The lists are usually short (you don't usually	2751	correct watcher to remove. The lists are usually short (you don't usually
2337	have many watchers waiting for the same fd or signal).	2752	have many watchers waiting for the same fd or signal).
2338		2753
2339	=item Finding the next timer per loop iteration: O(1)	2754	=item Finding the next timer in each loop iteration: O(1)
		2755
		2756	By virtue of using a binary heap, the next timer is always found at the
		2757	beginning of the storage array.
2340		2758
2341	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)	2759	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
2342		2760
2343	A change means an I/O watcher gets started or stopped, which requires	2761	A change means an I/O watcher gets started or stopped, which requires
2344	libev to recalculate its status (and possibly tell the kernel).	2762	libev to recalculate its status (and possibly tell the kernel, depending
		2763	on backend and wether C<ev_io_set> was used).
2345		2764
2346	=item Activating one watcher: O(1)	2765	=item Activating one watcher (putting it into the pending state): O(1)
2347		2766
2348	=item Priority handling: O(number_of_priorities)	2767	=item Priority handling: O(number_of_priorities)
2349		2768
2350	Priorities are implemented by allocating some space for each	2769	Priorities are implemented by allocating some space for each
2351	priority. When doing priority-based operations, libev usually has to	2770	priority. When doing priority-based operations, libev usually has to
2352	linearly search all the priorities.	2771	linearly search all the priorities, but starting/stopping and activating
		2772	watchers becomes O(1) w.r.t. prioritiy handling.
2353		2773
2354	=back	2774	=back
2355		2775
2356		2776
2357	=head1 AUTHOR	2777	=head1 AUTHOR

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing libev/ev.pod (file contents): Revision 1.72 by root, Fri Dec 7 20:19:16 2007 UTC vs. Revision 1.111 by root, Tue Dec 25 18:01:20 2007 UTC

Diff Legend

Comparing libev/ev.pod (file contents):
Revision 1.72 by root, Fri Dec 7 20:19:16 2007 UTC vs.
Revision 1.111 by root, Tue Dec 25 18:01:20 2007 UTC