[ViewVC] Diff of: cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.47 by root, Mon Nov 26 19:49:36 2007 UTC vs.
Revision 1.83 by root, Wed Dec 12 17:55:31 2007 UTC

…		…
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	#include <ev.h>	7	#include <ev.h>
8		8
		9	=head1 EXAMPLE PROGRAM
		10
		11	#include <ev.h>
		12
		13	ev_io stdin_watcher;
		14	ev_timer timeout_watcher;
		15
		16	/* called when data readable on stdin */
		17	static void
		18	stdin_cb (EV_P_ struct ev_io *w, int revents)
		19	{
		20	/* puts ("stdin ready"); */
		21	ev_io_stop (EV_A_ w); /* just a syntax example */
		22	ev_unloop (EV_A_ EVUNLOOP_ALL); /* leave all loop calls */
		23	}
		24
		25	static void
		26	timeout_cb (EV_P_ struct ev_timer *w, int revents)
		27	{
		28	/* puts ("timeout"); */
		29	ev_unloop (EV_A_ EVUNLOOP_ONE); /* leave one loop call */
		30	}
		31
		32	int
		33	main (void)
		34	{
		35	struct ev_loop *loop = ev_default_loop (0);
		36
		37	/* initialise an io watcher, then start it */
		38	ev_io_init (&stdin_watcher, stdin_cb, /STDIN_FILENO/ 0, EV_READ);
		39	ev_io_start (loop, &stdin_watcher);
		40
		41	/* simple non-repeating 5.5 second timeout */
		42	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
		43	ev_timer_start (loop, &timeout_watcher);
		44
		45	/* loop till timeout or data ready */
		46	ev_loop (loop, 0);
		47
		48	return 0;
		49	}
		50
9	=head1 DESCRIPTION	51	=head1 DESCRIPTION
		52
		53	The newest version of this document is also available as a html-formatted
		54	web page you might find easier to navigate when reading it for the first
		55	time: L<http://cvs.schmorp.de/libev/ev.html>.
10		56
11	Libev is an event loop: you register interest in certain events (such as a	57	Libev is an event loop: you register interest in certain events (such as a
12	file descriptor being readable or a timeout occuring), and it will manage	58	file descriptor being readable or a timeout occuring), and it will manage
13	these event sources and provide your program with events.	59	these event sources and provide your program with events.
14		60
…		…
21	details of the event, and then hand it over to libev by I<starting> the	67	details of the event, and then hand it over to libev by I<starting> the
22	watcher.	68	watcher.
23		69
24	=head1 FEATURES	70	=head1 FEATURES
25		71
26	Libev supports select, poll, the linux-specific epoll and the bsd-specific	72	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
27	kqueue mechanisms for file descriptor events, relative timers, absolute	73	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
28	timers with customised rescheduling, signal events, process status change	74	for file descriptor events (C<ev_io>), the Linux C<inotify> interface
29	events (related to SIGCHLD), and event watchers dealing with the event	75	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers
30	loop mechanism itself (idle, prepare and check watchers). It also is quite	76	with customised rescheduling (C<ev_periodic>), synchronous signals
		77	(C<ev_signal>), process status change events (C<ev_child>), and event
		78	watchers dealing with the event loop mechanism itself (C<ev_idle>,
		79	C<ev_embed>, C<ev_prepare> and C<ev_check> watchers) as well as
		80	file watchers (C<ev_stat>) and even limited support for fork events
		81	(C<ev_fork>).
		82
		83	It also is quite fast (see this
31	fast (see this L<benchmark\|http://libev.schmorp.de/bench.html> comparing	84	L<benchmark\|http://libev.schmorp.de/bench.html> comparing it to libevent
32	it to libevent for example).	85	for example).
33		86
34	=head1 CONVENTIONS	87	=head1 CONVENTIONS
35		88
36	Libev is very configurable. In this manual the default configuration	89	Libev is very configurable. In this manual the default configuration will
37	will be described, which supports multiple event loops. For more info	90	be described, which supports multiple event loops. For more info about
38	about various configuration options please have a look at the file	91	various configuration options please have a look at B<EMBED> section in
39	F<README.embed> in the libev distribution. If libev was configured without	92	this manual. If libev was configured without support for multiple event
40	support for multiple event loops, then all functions taking an initial	93	loops, then all functions taking an initial argument of name C<loop>
41	argument of name C<loop> (which is always of type C<struct ev_loop *>)	94	(which is always of type C<struct ev_loop *>) will not have this argument.
42	will not have this argument.
43		95
44	=head1 TIME REPRESENTATION	96	=head1 TIME REPRESENTATION
45		97
46	Libev represents time as a single floating point number, representing the	98	Libev represents time as a single floating point number, representing the
47	(fractional) number of seconds since the (POSIX) epoch (somewhere near	99	(fractional) number of seconds since the (POSIX) epoch (somewhere near
48	the beginning of 1970, details are complicated, don't ask). This type is	100	the beginning of 1970, details are complicated, don't ask). This type is
49	called C<ev_tstamp>, which is what you should use too. It usually aliases	101	called C<ev_tstamp>, which is what you should use too. It usually aliases
50	to the C<double> type in C, and when you need to do any calculations on	102	to the C<double> type in C, and when you need to do any calculations on
51	it, you should treat it as such.	103	it, you should treat it as such.
52		104
53
54	=head1 GLOBAL FUNCTIONS	105	=head1 GLOBAL FUNCTIONS
55		106
56	These functions can be called anytime, even before initialising the	107	These functions can be called anytime, even before initialising the
57	library in any way.	108	library in any way.
58		109
…		…
66		117
67	=item int ev_version_major ()	118	=item int ev_version_major ()
68		119
69	=item int ev_version_minor ()	120	=item int ev_version_minor ()
70		121
71	You can find out the major and minor version numbers of the library	122	You can find out the major and minor ABI version numbers of the library
72	you linked against by calling the functions C<ev_version_major> and	123	you linked against by calling the functions C<ev_version_major> and
73	C<ev_version_minor>. If you want, you can compare against the global	124	C<ev_version_minor>. If you want, you can compare against the global
74	symbols C<EV_VERSION_MAJOR> and C<EV_VERSION_MINOR>, which specify the	125	symbols C<EV_VERSION_MAJOR> and C<EV_VERSION_MINOR>, which specify the
75	version of the library your program was compiled against.	126	version of the library your program was compiled against.
76		127
		128	These version numbers refer to the ABI version of the library, not the
		129	release version.
		130
77	Usually, it's a good idea to terminate if the major versions mismatch,	131	Usually, it's a good idea to terminate if the major versions mismatch,
78	as this indicates an incompatible change. Minor versions are usually	132	as this indicates an incompatible change. Minor versions are usually
79	compatible to older versions, so a larger minor version alone is usually	133	compatible to older versions, so a larger minor version alone is usually
80	not a problem.	134	not a problem.
81		135
82	Example: make sure we haven't accidentally been linked against the wrong	136	Example: Make sure we haven't accidentally been linked against the wrong
83	version:	137	version.
84		138
85	assert (("libev version mismatch",	139	assert (("libev version mismatch",
86	ev_version_major () == EV_VERSION_MAJOR	140	ev_version_major () == EV_VERSION_MAJOR
87	&& ev_version_minor () >= EV_VERSION_MINOR));	141	&& ev_version_minor () >= EV_VERSION_MINOR));
88		142
…		…
118		172
119	See the description of C<ev_embed> watchers for more info.	173	See the description of C<ev_embed> watchers for more info.
120		174
121	=item ev_set_allocator (void (cb)(void *ptr, long size))	175	=item ev_set_allocator (void (cb)(void *ptr, long size))
122		176
123	Sets the allocation function to use (the prototype is similar to the	177	Sets the allocation function to use (the prototype is similar - the
124	realloc C function, the semantics are identical). It is used to allocate	178	semantics is identical - to the realloc C function). It is used to
125	and free memory (no surprises here). If it returns zero when memory	179	allocate and free memory (no surprises here). If it returns zero when
126	needs to be allocated, the library might abort or take some potentially	180	memory needs to be allocated, the library might abort or take some
127	destructive action. The default is your system realloc function.	181	potentially destructive action. The default is your system realloc
		182	function.
128		183
129	You could override this function in high-availability programs to, say,	184	You could override this function in high-availability programs to, say,
130	free some memory if it cannot allocate memory, to use a special allocator,	185	free some memory if it cannot allocate memory, to use a special allocator,
131	or even to sleep a while and retry until some memory is available.	186	or even to sleep a while and retry until some memory is available.
132		187
133	Example: replace the libev allocator with one that waits a bit and then	188	Example: Replace the libev allocator with one that waits a bit and then
134	retries: better than mine).	189	retries).
135		190
136	static void *	191	static void *
137	persistent_realloc (void *ptr, long size)	192	persistent_realloc (void *ptr, size_t size)
138	{	193	{
139	for (;;)	194	for (;;)
140	{	195	{
141	void *newptr = realloc (ptr, size);	196	void *newptr = realloc (ptr, size);
142		197
…		…
158	callback is set, then libev will expect it to remedy the sitution, no	213	callback is set, then libev will expect it to remedy the sitution, no
159	matter what, when it returns. That is, libev will generally retry the	214	matter what, when it returns. That is, libev will generally retry the
160	requested operation, or, if the condition doesn't go away, do bad stuff	215	requested operation, or, if the condition doesn't go away, do bad stuff
161	(such as abort).	216	(such as abort).
162		217
163	Example: do the same thing as libev does internally:	218	Example: This is basically the same thing that libev does internally, too.
164		219
165	static void	220	static void
166	fatal_error (const char *msg)	221	fatal_error (const char *msg)
167	{	222	{
168	perror (msg);	223	perror (msg);
…		…
218	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will	273	C<LIBEV_FLAGS>. Otherwise (the default), this environment variable will
219	override the flags completely if it is found in the environment. This is	274	override the flags completely if it is found in the environment. This is
220	useful to try out specific backends to test their performance, or to work	275	useful to try out specific backends to test their performance, or to work
221	around bugs.	276	around bugs.
222		277
		278	=item C<EVFLAG_FORKCHECK>
		279
		280	Instead of calling C<ev_default_fork> or C<ev_loop_fork> manually after
		281	a fork, you can also make libev check for a fork in each iteration by
		282	enabling this flag.
		283
		284	This works by calling C<getpid ()> on every iteration of the loop,
		285	and thus this might slow down your event loop if you do a lot of loop
		286	iterations and little real work, but is usually not noticeable (on my
		287	Linux system for example, C<getpid> is actually a simple 5-insn sequence
		288	without a syscall and thus I<very> fast, but my Linux system also has
		289	C<pthread_atfork> which is even faster).
		290
		291	The big advantage of this flag is that you can forget about fork (and
		292	forget about forgetting to tell libev about forking) when you use this
		293	flag.
		294
		295	This flag setting cannot be overriden or specified in the C<LIBEV_FLAGS>
		296	environment variable.
		297
223	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	298	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
224		299
225	This is your standard select(2) backend. Not I<completely> standard, as	300	This is your standard select(2) backend. Not I<completely> standard, as
226	libev tries to roll its own fd_set with no limits on the number of fds,	301	libev tries to roll its own fd_set with no limits on the number of fds,
227	but if that fails, expect a fairly low limit on the number of fds when	302	but if that fails, expect a fairly low limit on the number of fds when
…		…
314	Similar to C<ev_default_loop>, but always creates a new event loop that is	389	Similar to C<ev_default_loop>, but always creates a new event loop that is
315	always distinct from the default loop. Unlike the default loop, it cannot	390	always distinct from the default loop. Unlike the default loop, it cannot
316	handle signal and child watchers, and attempts to do so will be greeted by	391	handle signal and child watchers, and attempts to do so will be greeted by
317	undefined behaviour (or a failed assertion if assertions are enabled).	392	undefined behaviour (or a failed assertion if assertions are enabled).
318		393
319	Example: try to create a event loop that uses epoll and nothing else.	394	Example: Try to create a event loop that uses epoll and nothing else.
320		395
321	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL \| EVFLAG_NOENV);	396	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL \| EVFLAG_NOENV);
322	if (!epoller)	397	if (!epoller)
323	fatal ("no epoll found here, maybe it hides under your chair");	398	fatal ("no epoll found here, maybe it hides under your chair");
324		399
…		…
362		437
363	Like C<ev_default_fork>, but acts on an event loop created by	438	Like C<ev_default_fork>, but acts on an event loop created by
364	C<ev_loop_new>. Yes, you have to call this on every allocated event loop	439	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
365	after fork, and how you do this is entirely your own problem.	440	after fork, and how you do this is entirely your own problem.
366		441
		442	=item unsigned int ev_loop_count (loop)
		443
		444	Returns the count of loop iterations for the loop, which is identical to
		445	the number of times libev did poll for new events. It starts at C<0> and
		446	happily wraps around with enough iterations.
		447
		448	This value can sometimes be useful as a generation counter of sorts (it
		449	"ticks" the number of loop iterations), as it roughly corresponds with
		450	C<ev_prepare> and C<ev_check> calls.
		451
367	=item unsigned int ev_backend (loop)	452	=item unsigned int ev_backend (loop)
368		453
369	Returns one of the C<EVBACKEND_*> flags indicating the event backend in	454	Returns one of the C<EVBACKEND_*> flags indicating the event backend in
370	use.	455	use.
371		456
…		…
404	libev watchers. However, a pair of C<ev_prepare>/C<ev_check> watchers is	489	libev watchers. However, a pair of C<ev_prepare>/C<ev_check> watchers is
405	usually a better approach for this kind of thing.	490	usually a better approach for this kind of thing.
406		491
407	Here are the gory details of what C<ev_loop> does:	492	Here are the gory details of what C<ev_loop> does:
408		493
		494	- Before the first iteration, call any pending watchers.
409	* If there are no active watchers (reference count is zero), return.	495	* If there are no active watchers (reference count is zero), return.
410	- Queue prepare watchers and then call all outstanding watchers.	496	- Queue all prepare watchers and then call all outstanding watchers.
411	- If we have been forked, recreate the kernel state.	497	- If we have been forked, recreate the kernel state.
412	- Update the kernel state with all outstanding changes.	498	- Update the kernel state with all outstanding changes.
413	- Update the "event loop time".	499	- Update the "event loop time".
414	- Calculate for how long to block.	500	- Calculate for how long to block.
415	- Block the process, waiting for any events.	501	- Block the process, waiting for any events.
…		…
423	Signals and child watchers are implemented as I/O watchers, and will	509	Signals and child watchers are implemented as I/O watchers, and will
424	be handled here by queueing them when their watcher gets executed.	510	be handled here by queueing them when their watcher gets executed.
425	- If ev_unloop has been called or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	511	- If ev_unloop has been called or EVLOOP_ONESHOT or EVLOOP_NONBLOCK
426	were used, return, otherwise continue with step *.	512	were used, return, otherwise continue with step *.
427		513
428	Example: queue some jobs and then loop until no events are outsanding	514	Example: Queue some jobs and then loop until no events are outsanding
429	anymore.	515	anymore.
430		516
431	... queue jobs here, make sure they register event watchers as long	517	... queue jobs here, make sure they register event watchers as long
432	... as they still have work to do (even an idle watcher will do..)	518	... as they still have work to do (even an idle watcher will do..)
433	ev_loop (my_loop, 0);	519	ev_loop (my_loop, 0);
…		…
453	visible to the libev user and should not keep C<ev_loop> from exiting if	539	visible to the libev user and should not keep C<ev_loop> from exiting if
454	no event watchers registered by it are active. It is also an excellent	540	no event watchers registered by it are active. It is also an excellent
455	way to do this for generic recurring timers or from within third-party	541	way to do this for generic recurring timers or from within third-party
456	libraries. Just remember to I<unref after start> and I<ref before stop>.	542	libraries. Just remember to I<unref after start> and I<ref before stop>.
457		543
458	Example: create a signal watcher, but keep it from keeping C<ev_loop>	544	Example: Create a signal watcher, but keep it from keeping C<ev_loop>
459	running when nothing else is active.	545	running when nothing else is active.
460		546
461	struct dv_signal exitsig;	547	struct ev_signal exitsig;
462	ev_signal_init (&exitsig, sig_cb, SIGINT);	548	ev_signal_init (&exitsig, sig_cb, SIGINT);
463	ev_signal_start (myloop, &exitsig);	549	ev_signal_start (loop, &exitsig);
464	evf_unref (myloop);	550	evf_unref (loop);
465		551
466	Example: for some weird reason, unregister the above signal handler again.	552	Example: For some weird reason, unregister the above signal handler again.
467		553
468	ev_ref (myloop);	554	ev_ref (loop);
469	ev_signal_stop (myloop, &exitsig);	555	ev_signal_stop (loop, &exitsig);
470		556
471	=back	557	=back
472		558
473		559
474	=head1 ANATOMY OF A WATCHER	560	=head1 ANATOMY OF A WATCHER
…		…
544	The signal specified in the C<ev_signal> watcher has been received by a thread.	630	The signal specified in the C<ev_signal> watcher has been received by a thread.
545		631
546	=item C<EV_CHILD>	632	=item C<EV_CHILD>
547		633
548	The pid specified in the C<ev_child> watcher has received a status change.	634	The pid specified in the C<ev_child> watcher has received a status change.
		635
		636	=item C<EV_STAT>
		637
		638	The path specified in the C<ev_stat> watcher changed its attributes somehow.
549		639
550	=item C<EV_IDLE>	640	=item C<EV_IDLE>
551		641
552	The C<ev_idle> watcher has determined that you have nothing better to do.	642	The C<ev_idle> watcher has determined that you have nothing better to do.
553		643
…		…
561	received events. Callbacks of both watcher types can start and stop as	651	received events. Callbacks of both watcher types can start and stop as
562	many watchers as they want, and all of them will be taken into account	652	many watchers as they want, and all of them will be taken into account
563	(for example, a C<ev_prepare> watcher might start an idle watcher to keep	653	(for example, a C<ev_prepare> watcher might start an idle watcher to keep
564	C<ev_loop> from blocking).	654	C<ev_loop> from blocking).
565		655
		656	=item C<EV_EMBED>
		657
		658	The embedded event loop specified in the C<ev_embed> watcher needs attention.
		659
		660	=item C<EV_FORK>
		661
		662	The event loop has been resumed in the child process after fork (see
		663	C<ev_fork>).
		664
566	=item C<EV_ERROR>	665	=item C<EV_ERROR>
567		666
568	An unspecified error has occured, the watcher has been stopped. This might	667	An unspecified error has occured, the watcher has been stopped. This might
569	happen because the watcher could not be properly started because libev	668	happen because the watcher could not be properly started because libev
570	ran out of memory, a file descriptor was found to be closed or any other	669	ran out of memory, a file descriptor was found to be closed or any other
…		…
641	=item bool ev_is_pending (ev_TYPE *watcher)	740	=item bool ev_is_pending (ev_TYPE *watcher)
642		741
643	Returns a true value iff the watcher is pending, (i.e. it has outstanding	742	Returns a true value iff the watcher is pending, (i.e. it has outstanding
644	events but its callback has not yet been invoked). As long as a watcher	743	events but its callback has not yet been invoked). As long as a watcher
645	is pending (but not active) you must not call an init function on it (but	744	is pending (but not active) you must not call an init function on it (but
646	C<ev_TYPE_set> is safe) and you must make sure the watcher is available to	745	C<ev_TYPE_set> is safe), you must not change its priority, and you must
647	libev (e.g. you cnanot C<free ()> it).	746	make sure the watcher is available to libev (e.g. you cannot C<free ()>
		747	it).
648		748
649	=item callback = ev_cb (ev_TYPE *watcher)	749	=item callback ev_cb (ev_TYPE *watcher)
650		750
651	Returns the callback currently set on the watcher.	751	Returns the callback currently set on the watcher.
652		752
653	=item ev_cb_set (ev_TYPE *watcher, callback)	753	=item ev_cb_set (ev_TYPE *watcher, callback)
654		754
655	Change the callback. You can change the callback at virtually any time	755	Change the callback. You can change the callback at virtually any time
656	(modulo threads).	756	(modulo threads).
		757
		758	=item ev_set_priority (ev_TYPE *watcher, priority)
		759
		760	=item int ev_priority (ev_TYPE *watcher)
		761
		762	Set and query the priority of the watcher. The priority is a small
		763	integer between C<EV_MAXPRI> (default: C<2>) and C<EV_MINPRI>
		764	(default: C<-2>). Pending watchers with higher priority will be invoked
		765	before watchers with lower priority, but priority will not keep watchers
		766	from being executed (except for C<ev_idle> watchers).
		767
		768	This means that priorities are I<only> used for ordering callback
		769	invocation after new events have been received. This is useful, for
		770	example, to reduce latency after idling, or more often, to bind two
		771	watchers on the same event and make sure one is called first.
		772
		773	If you need to suppress invocation when higher priority events are pending
		774	you need to look at C<ev_idle> watchers, which provide this functionality.
		775
		776	You I<must not> change the priority of a watcher as long as it is active or
		777	pending.
		778
		779	The default priority used by watchers when no priority has been set is
		780	always C<0>, which is supposed to not be too high and not be too low :).
		781
		782	Setting a priority outside the range of C<EV_MINPRI> to C<EV_MAXPRI> is
		783	fine, as long as you do not mind that the priority value you query might
		784	or might not have been adjusted to be within valid range.
		785
		786	=item ev_invoke (loop, ev_TYPE *watcher, int revents)
		787
		788	Invoke the C<watcher> with the given C<loop> and C<revents>. Neither
		789	C<loop> nor C<revents> need to be valid as long as the watcher callback
		790	can deal with that fact.
		791
		792	=item int ev_clear_pending (loop, ev_TYPE *watcher)
		793
		794	If the watcher is pending, this function returns clears its pending status
		795	and returns its C<revents> bitset (as if its callback was invoked). If the
		796	watcher isn't pending it does nothing and returns C<0>.
657		797
658	=back	798	=back
659		799
660		800
661	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER	801	=head2 ASSOCIATING CUSTOM DATA WITH A WATCHER
…		…
682	{	822	{
683	struct my_io w = (struct my_io )w_;	823	struct my_io w = (struct my_io )w_;
684	...	824	...
685	}	825	}
686		826
687	More interesting and less C-conformant ways of catsing your callback type	827	More interesting and less C-conformant ways of casting your callback type
688	have been omitted....	828	instead have been omitted.
		829
		830	Another common scenario is having some data structure with multiple
		831	watchers:
		832
		833	struct my_biggy
		834	{
		835	int some_data;
		836	ev_timer t1;
		837	ev_timer t2;
		838	}
		839
		840	In this case getting the pointer to C<my_biggy> is a bit more complicated,
		841	you need to use C<offsetof>:
		842
		843	#include <stddef.h>
		844
		845	static void
		846	t1_cb (EV_P_ struct ev_timer *w, int revents)
		847	{
		848	struct my_biggy big = (struct my_biggy *
		849	(((char *)w) - offsetof (struct my_biggy, t1));
		850	}
		851
		852	static void
		853	t2_cb (EV_P_ struct ev_timer *w, int revents)
		854	{
		855	struct my_biggy big = (struct my_biggy *
		856	(((char *)w) - offsetof (struct my_biggy, t2));
		857	}
689		858
690		859
691	=head1 WATCHER TYPES	860	=head1 WATCHER TYPES
692		861
693	This section describes each watcher in detail, but will not repeat	862	This section describes each watcher in detail, but will not repeat
694	information given in the last section.	863	information given in the last section. Any initialisation/set macros,
		864	functions and members specific to the watcher type are explained.
		865
		866	Members are additionally marked with either I<[read-only]>, meaning that,
		867	while the watcher is active, you can look at the member and expect some
		868	sensible content, but you must not modify it (you can modify it while the
		869	watcher is stopped to your hearts content), or I<[read-write]>, which
		870	means you can expect it to have some sensible content while the watcher
		871	is active, but you can also modify it. Modifying it may not do something
		872	sensible or take immediate effect (or do anything at all), but libev will
		873	not crash or malfunction in any way.
695		874
696		875
697	=head2 C<ev_io> - is this file descriptor readable or writable?	876	=head2 C<ev_io> - is this file descriptor readable or writable?
698		877
699	I/O watchers check whether a file descriptor is readable or writable	878	I/O watchers check whether a file descriptor is readable or writable
…		…
728	it is best to always use non-blocking I/O: An extra C<read>(2) returning	907	it is best to always use non-blocking I/O: An extra C<read>(2) returning
729	C<EAGAIN> is far preferable to a program hanging until some data arrives.	908	C<EAGAIN> is far preferable to a program hanging until some data arrives.
730		909
731	If you cannot run the fd in non-blocking mode (for example you should not	910	If you cannot run the fd in non-blocking mode (for example you should not
732	play around with an Xlib connection), then you have to seperately re-test	911	play around with an Xlib connection), then you have to seperately re-test
733	wether a file descriptor is really ready with a known-to-be good interface	912	whether a file descriptor is really ready with a known-to-be good interface
734	such as poll (fortunately in our Xlib example, Xlib already does this on	913	such as poll (fortunately in our Xlib example, Xlib already does this on
735	its own, so its quite safe to use).	914	its own, so its quite safe to use).
		915
		916	=head3 The special problem of disappearing file descriptors
		917
		918	Some backends (e.g kqueue, epoll) need to be told about closing a file
		919	descriptor (either by calling C<close> explicitly or by any other means,
		920	such as C<dup>). The reason is that you register interest in some file
		921	descriptor, but when it goes away, the operating system will silently drop
		922	this interest. If another file descriptor with the same number then is
		923	registered with libev, there is no efficient way to see that this is, in
		924	fact, a different file descriptor.
		925
		926	To avoid having to explicitly tell libev about such cases, libev follows
		927	the following policy: Each time C<ev_io_set> is being called, libev
		928	will assume that this is potentially a new file descriptor, otherwise
		929	it is assumed that the file descriptor stays the same. That means that
		930	you I<have> to call C<ev_io_set> (or C<ev_io_init>) when you change the
		931	descriptor even if the file descriptor number itself did not change.
		932
		933	This is how one would do it normally anyway, the important point is that
		934	the libev application should not optimise around libev but should leave
		935	optimisations to libev.
		936
		937
		938	=head3 Watcher-Specific Functions
736		939
737	=over 4	940	=over 4
738		941
739	=item ev_io_init (ev_io *, callback, int fd, int events)	942	=item ev_io_init (ev_io *, callback, int fd, int events)
740		943
…		…
742		945
743	Configures an C<ev_io> watcher. The C<fd> is the file descriptor to	946	Configures an C<ev_io> watcher. The C<fd> is the file descriptor to
744	rceeive events for and events is either C<EV_READ>, C<EV_WRITE> or	947	rceeive events for and events is either C<EV_READ>, C<EV_WRITE> or
745	C<EV_READ \| EV_WRITE> to receive the given events.	948	C<EV_READ \| EV_WRITE> to receive the given events.
746		949
		950	=item int fd [read-only]
		951
		952	The file descriptor being watched.
		953
		954	=item int events [read-only]
		955
		956	The events being watched.
		957
747	=back	958	=back
748		959
749	Example: call C<stdin_readable_cb> when STDIN_FILENO has become, well	960	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well
750	readable, but only once. Since it is likely line-buffered, you could	961	readable, but only once. Since it is likely line-buffered, you could
751	attempt to read a whole line in the callback:	962	attempt to read a whole line in the callback.
752		963
753	static void	964	static void
754	stdin_readable_cb (struct ev_loop loop, struct ev_io w, int revents)	965	stdin_readable_cb (struct ev_loop loop, struct ev_io w, int revents)
755	{	966	{
756	ev_io_stop (loop, w);	967	ev_io_stop (loop, w);
…		…
786		997
787	The callback is guarenteed to be invoked only when its timeout has passed,	998	The callback is guarenteed to be invoked only when its timeout has passed,
788	but if multiple timers become ready during the same loop iteration then	999	but if multiple timers become ready during the same loop iteration then
789	order of execution is undefined.	1000	order of execution is undefined.
790		1001
		1002	=head3 Watcher-Specific Functions and Data Members
		1003
791	=over 4	1004	=over 4
792		1005
793	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)	1006	=item ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
794		1007
795	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)	1008	=item ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)
…		…
808	=item ev_timer_again (loop)	1021	=item ev_timer_again (loop)
809		1022
810	This will act as if the timer timed out and restart it again if it is	1023	This will act as if the timer timed out and restart it again if it is
811	repeating. The exact semantics are:	1024	repeating. The exact semantics are:
812		1025
		1026	If the timer is pending, its pending status is cleared.
		1027
813	If the timer is started but nonrepeating, stop it.	1028	If the timer is started but nonrepeating, stop it (as if it timed out).
814		1029
815	If the timer is repeating, either start it if necessary (with the repeat	1030	If the timer is repeating, either start it if necessary (with the
816	value), or reset the running timer to the repeat value.	1031	C<repeat> value), or reset the running timer to the C<repeat> value.
817		1032
818	This sounds a bit complicated, but here is a useful and typical	1033	This sounds a bit complicated, but here is a useful and typical
819	example: Imagine you have a tcp connection and you want a so-called idle	1034	example: Imagine you have a tcp connection and you want a so-called idle
820	timeout, that is, you want to be called when there have been, say, 60	1035	timeout, that is, you want to be called when there have been, say, 60
821	seconds of inactivity on the socket. The easiest way to do this is to	1036	seconds of inactivity on the socket. The easiest way to do this is to
822	configure an C<ev_timer> with after=repeat=60 and calling ev_timer_again each	1037	configure an C<ev_timer> with a C<repeat> value of C<60> and then call
823	time you successfully read or write some data. If you go into an idle	1038	C<ev_timer_again> each time you successfully read or write some data. If
824	state where you do not expect data to travel on the socket, you can stop	1039	you go into an idle state where you do not expect data to travel on the
825	the timer, and again will automatically restart it if need be.	1040	socket, you can C<ev_timer_stop> the timer, and C<ev_timer_again> will
		1041	automatically restart it if need be.
		1042
		1043	That means you can ignore the C<after> value and C<ev_timer_start>
		1044	altogether and only ever use the C<repeat> value and C<ev_timer_again>:
		1045
		1046	ev_timer_init (timer, callback, 0., 5.);
		1047	ev_timer_again (loop, timer);
		1048	...
		1049	timer->again = 17.;
		1050	ev_timer_again (loop, timer);
		1051	...
		1052	timer->again = 10.;
		1053	ev_timer_again (loop, timer);
		1054
		1055	This is more slightly efficient then stopping/starting the timer each time
		1056	you want to modify its timeout value.
		1057
		1058	=item ev_tstamp repeat [read-write]
		1059
		1060	The current C<repeat> value. Will be used each time the watcher times out
		1061	or C<ev_timer_again> is called and determines the next timeout (if any),
		1062	which is also when any modifications are taken into account.
826		1063
827	=back	1064	=back
828		1065
829	Example: create a timer that fires after 60 seconds.	1066	Example: Create a timer that fires after 60 seconds.
830		1067
831	static void	1068	static void
832	one_minute_cb (struct ev_loop loop, struct ev_timer w, int revents)	1069	one_minute_cb (struct ev_loop loop, struct ev_timer w, int revents)
833	{	1070	{
834	.. one minute over, w is actually stopped right here	1071	.. one minute over, w is actually stopped right here
…		…
836		1073
837	struct ev_timer mytimer;	1074	struct ev_timer mytimer;
838	ev_timer_init (&mytimer, one_minute_cb, 60., 0.);	1075	ev_timer_init (&mytimer, one_minute_cb, 60., 0.);
839	ev_timer_start (loop, &mytimer);	1076	ev_timer_start (loop, &mytimer);
840		1077
841	Example: create a timeout timer that times out after 10 seconds of	1078	Example: Create a timeout timer that times out after 10 seconds of
842	inactivity.	1079	inactivity.
843		1080
844	static void	1081	static void
845	timeout_cb (struct ev_loop loop, struct ev_timer w, int revents)	1082	timeout_cb (struct ev_loop loop, struct ev_timer w, int revents)
846	{	1083	{
…		…
866	but on wallclock time (absolute time). You can tell a periodic watcher	1103	but on wallclock time (absolute time). You can tell a periodic watcher
867	to trigger "at" some specific point in time. For example, if you tell a	1104	to trigger "at" some specific point in time. For example, if you tell a
868	periodic watcher to trigger in 10 seconds (by specifiying e.g. C<ev_now ()	1105	periodic watcher to trigger in 10 seconds (by specifiying e.g. C<ev_now ()
869	+ 10.>) and then reset your system clock to the last year, then it will	1106	+ 10.>) and then reset your system clock to the last year, then it will
870	take a year to trigger the event (unlike an C<ev_timer>, which would trigger	1107	take a year to trigger the event (unlike an C<ev_timer>, which would trigger
871	roughly 10 seconds later and of course not if you reset your system time	1108	roughly 10 seconds later).
872	again).
873		1109
874	They can also be used to implement vastly more complex timers, such as	1110	They can also be used to implement vastly more complex timers, such as
875	triggering an event on eahc midnight, local time.	1111	triggering an event on each midnight, local time or other, complicated,
		1112	rules.
876		1113
877	As with timers, the callback is guarenteed to be invoked only when the	1114	As with timers, the callback is guarenteed to be invoked only when the
878	time (C<at>) has been passed, but if multiple periodic timers become ready	1115	time (C<at>) has been passed, but if multiple periodic timers become ready
879	during the same loop iteration then order of execution is undefined.	1116	during the same loop iteration then order of execution is undefined.
880		1117
		1118	=head3 Watcher-Specific Functions and Data Members
		1119
881	=over 4	1120	=over 4
882		1121
883	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)	1122	=item ev_periodic_init (ev_periodic *, callback, ev_tstamp at, ev_tstamp interval, reschedule_cb)
884		1123
885	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)	1124	=item ev_periodic_set (ev_periodic *, ev_tstamp after, ev_tstamp repeat, reschedule_cb)
…		…
887	Lots of arguments, lets sort it out... There are basically three modes of	1126	Lots of arguments, lets sort it out... There are basically three modes of
888	operation, and we will explain them from simplest to complex:	1127	operation, and we will explain them from simplest to complex:
889		1128
890	=over 4	1129	=over 4
891		1130
892	=item * absolute timer (interval = reschedule_cb = 0)	1131	=item * absolute timer (at = time, interval = reschedule_cb = 0)
893		1132
894	In this configuration the watcher triggers an event at the wallclock time	1133	In this configuration the watcher triggers an event at the wallclock time
895	C<at> and doesn't repeat. It will not adjust when a time jump occurs,	1134	C<at> and doesn't repeat. It will not adjust when a time jump occurs,
896	that is, if it is to be run at January 1st 2011 then it will run when the	1135	that is, if it is to be run at January 1st 2011 then it will run when the
897	system time reaches or surpasses this time.	1136	system time reaches or surpasses this time.
898		1137
899	=item * non-repeating interval timer (interval > 0, reschedule_cb = 0)	1138	=item * non-repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)
900		1139
901	In this mode the watcher will always be scheduled to time out at the next	1140	In this mode the watcher will always be scheduled to time out at the next
902	C<at + N * interval> time (for some integer N) and then repeat, regardless	1141	C<at + N * interval> time (for some integer N, which can also be negative)
903	of any time jumps.	1142	and then repeat, regardless of any time jumps.
904		1143
905	This can be used to create timers that do not drift with respect to system	1144	This can be used to create timers that do not drift with respect to system
906	time:	1145	time:
907		1146
908	ev_periodic_set (&periodic, 0., 3600., 0);	1147	ev_periodic_set (&periodic, 0., 3600., 0);
…		…
914		1153
915	Another way to think about it (for the mathematically inclined) is that	1154	Another way to think about it (for the mathematically inclined) is that
916	C<ev_periodic> will try to run the callback in this mode at the next possible	1155	C<ev_periodic> will try to run the callback in this mode at the next possible
917	time where C<time = at (mod interval)>, regardless of any time jumps.	1156	time where C<time = at (mod interval)>, regardless of any time jumps.
918		1157
		1158	For numerical stability it is preferable that the C<at> value is near
		1159	C<ev_now ()> (the current time), but there is no range requirement for
		1160	this value.
		1161
919	=item * manual reschedule mode (reschedule_cb = callback)	1162	=item * manual reschedule mode (at and interval ignored, reschedule_cb = callback)
920		1163
921	In this mode the values for C<interval> and C<at> are both being	1164	In this mode the values for C<interval> and C<at> are both being
922	ignored. Instead, each time the periodic watcher gets scheduled, the	1165	ignored. Instead, each time the periodic watcher gets scheduled, the
923	reschedule callback will be called with the watcher as first, and the	1166	reschedule callback will be called with the watcher as first, and the
924	current time as second argument.	1167	current time as second argument.
925		1168
926	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,	1169	NOTE: I<This callback MUST NOT stop or destroy any periodic watcher,
927	ever, or make any event loop modifications>. If you need to stop it,	1170	ever, or make any event loop modifications>. If you need to stop it,
928	return C<now + 1e30> (or so, fudge fudge) and stop it afterwards (e.g. by	1171	return C<now + 1e30> (or so, fudge fudge) and stop it afterwards (e.g. by
929	starting a prepare watcher).	1172	starting an C<ev_prepare> watcher, which is legal).
930		1173
931	Its prototype is C<ev_tstamp (reschedule_cb)(struct ev_periodic w,	1174	Its prototype is C<ev_tstamp (reschedule_cb)(struct ev_periodic w,
932	ev_tstamp now)>, e.g.:	1175	ev_tstamp now)>, e.g.:
933		1176
934	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)	1177	static ev_tstamp my_rescheduler (struct ev_periodic *w, ev_tstamp now)
…		…
957	Simply stops and restarts the periodic watcher again. This is only useful	1200	Simply stops and restarts the periodic watcher again. This is only useful
958	when you changed some parameters or the reschedule callback would return	1201	when you changed some parameters or the reschedule callback would return
959	a different time than the last time it was called (e.g. in a crond like	1202	a different time than the last time it was called (e.g. in a crond like
960	program when the crontabs have changed).	1203	program when the crontabs have changed).
961		1204
		1205	=item ev_tstamp offset [read-write]
		1206
		1207	When repeating, this contains the offset value, otherwise this is the
		1208	absolute point in time (the C<at> value passed to C<ev_periodic_set>).
		1209
		1210	Can be modified any time, but changes only take effect when the periodic
		1211	timer fires or C<ev_periodic_again> is being called.
		1212
		1213	=item ev_tstamp interval [read-write]
		1214
		1215	The current interval value. Can be modified any time, but changes only
		1216	take effect when the periodic timer fires or C<ev_periodic_again> is being
		1217	called.
		1218
		1219	=item ev_tstamp (reschedule_cb)(struct ev_periodic w, ev_tstamp now) [read-write]
		1220
		1221	The current reschedule callback, or C<0>, if this functionality is
		1222	switched off. Can be changed any time, but changes only take effect when
		1223	the periodic timer fires or C<ev_periodic_again> is being called.
		1224
962	=back	1225	=back
963		1226
964	Example: call a callback every hour, or, more precisely, whenever the	1227	Example: Call a callback every hour, or, more precisely, whenever the
965	system clock is divisible by 3600. The callback invocation times have	1228	system clock is divisible by 3600. The callback invocation times have
966	potentially a lot of jittering, but good long-term stability.	1229	potentially a lot of jittering, but good long-term stability.
967		1230
968	static void	1231	static void
969	clock_cb (struct ev_loop loop, struct ev_io w, int revents)	1232	clock_cb (struct ev_loop loop, struct ev_io w, int revents)
…		…
973		1236
974	struct ev_periodic hourly_tick;	1237	struct ev_periodic hourly_tick;
975	ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);	1238	ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);
976	ev_periodic_start (loop, &hourly_tick);	1239	ev_periodic_start (loop, &hourly_tick);
977		1240
978	Example: the same as above, but use a reschedule callback to do it:	1241	Example: The same as above, but use a reschedule callback to do it:
979		1242
980	#include <math.h>	1243	#include <math.h>
981		1244
982	static ev_tstamp	1245	static ev_tstamp
983	my_scheduler_cb (struct ev_periodic *w, ev_tstamp now)	1246	my_scheduler_cb (struct ev_periodic *w, ev_tstamp now)
…		…
985	return fmod (now, 3600.) + 3600.;	1248	return fmod (now, 3600.) + 3600.;
986	}	1249	}
987		1250
988	ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);	1251	ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);
989		1252
990	Example: call a callback every hour, starting now:	1253	Example: Call a callback every hour, starting now:
991		1254
992	struct ev_periodic hourly_tick;	1255	struct ev_periodic hourly_tick;
993	ev_periodic_init (&hourly_tick, clock_cb,	1256	ev_periodic_init (&hourly_tick, clock_cb,
994	fmod (ev_now (loop), 3600.), 3600., 0);	1257	fmod (ev_now (loop), 3600.), 3600., 0);
995	ev_periodic_start (loop, &hourly_tick);	1258	ev_periodic_start (loop, &hourly_tick);
…		…
1007	with the kernel (thus it coexists with your own signal handlers as long	1270	with the kernel (thus it coexists with your own signal handlers as long
1008	as you don't register any with libev). Similarly, when the last signal	1271	as you don't register any with libev). Similarly, when the last signal
1009	watcher for a signal is stopped libev will reset the signal handler to	1272	watcher for a signal is stopped libev will reset the signal handler to
1010	SIG_DFL (regardless of what it was set to before).	1273	SIG_DFL (regardless of what it was set to before).
1011		1274
		1275	=head3 Watcher-Specific Functions and Data Members
		1276
1012	=over 4	1277	=over 4
1013		1278
1014	=item ev_signal_init (ev_signal *, callback, int signum)	1279	=item ev_signal_init (ev_signal *, callback, int signum)
1015		1280
1016	=item ev_signal_set (ev_signal *, int signum)	1281	=item ev_signal_set (ev_signal *, int signum)
1017		1282
1018	Configures the watcher to trigger on the given signal number (usually one	1283	Configures the watcher to trigger on the given signal number (usually one
1019	of the C<SIGxxx> constants).	1284	of the C<SIGxxx> constants).
1020		1285
		1286	=item int signum [read-only]
		1287
		1288	The signal the watcher watches out for.
		1289
1021	=back	1290	=back
1022		1291
1023		1292
1024	=head2 C<ev_child> - watch out for process status changes	1293	=head2 C<ev_child> - watch out for process status changes
1025		1294
1026	Child watchers trigger when your process receives a SIGCHLD in response to	1295	Child watchers trigger when your process receives a SIGCHLD in response to
1027	some child status changes (most typically when a child of yours dies).	1296	some child status changes (most typically when a child of yours dies).
		1297
		1298	=head3 Watcher-Specific Functions and Data Members
1028		1299
1029	=over 4	1300	=over 4
1030		1301
1031	=item ev_child_init (ev_child *, callback, int pid)	1302	=item ev_child_init (ev_child *, callback, int pid)
1032		1303
…		…
1037	at the C<rstatus> member of the C<ev_child> watcher structure to see	1308	at the C<rstatus> member of the C<ev_child> watcher structure to see
1038	the status word (use the macros from C<sys/wait.h> and see your systems	1309	the status word (use the macros from C<sys/wait.h> and see your systems
1039	C<waitpid> documentation). The C<rpid> member contains the pid of the	1310	C<waitpid> documentation). The C<rpid> member contains the pid of the
1040	process causing the status change.	1311	process causing the status change.
1041		1312
		1313	=item int pid [read-only]
		1314
		1315	The process id this watcher watches out for, or C<0>, meaning any process id.
		1316
		1317	=item int rpid [read-write]
		1318
		1319	The process id that detected a status change.
		1320
		1321	=item int rstatus [read-write]
		1322
		1323	The process exit/trace status caused by C<rpid> (see your systems
		1324	C<waitpid> and C<sys/wait.h> documentation for details).
		1325
1042	=back	1326	=back
1043		1327
1044	Example: try to exit cleanly on SIGINT and SIGTERM.	1328	Example: Try to exit cleanly on SIGINT and SIGTERM.
1045		1329
1046	static void	1330	static void
1047	sigint_cb (struct ev_loop loop, struct ev_signal w, int revents)	1331	sigint_cb (struct ev_loop loop, struct ev_signal w, int revents)
1048	{	1332	{
1049	ev_unloop (loop, EVUNLOOP_ALL);	1333	ev_unloop (loop, EVUNLOOP_ALL);
…		…
1052	struct ev_signal signal_watcher;	1336	struct ev_signal signal_watcher;
1053	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	1337	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
1054	ev_signal_start (loop, &sigint_cb);	1338	ev_signal_start (loop, &sigint_cb);
1055		1339
1056		1340
		1341	=head2 C<ev_stat> - did the file attributes just change?
		1342
		1343	This watches a filesystem path for attribute changes. That is, it calls
		1344	C<stat> regularly (or when the OS says it changed) and sees if it changed
		1345	compared to the last time, invoking the callback if it did.
		1346
		1347	The path does not need to exist: changing from "path exists" to "path does
		1348	not exist" is a status change like any other. The condition "path does
		1349	not exist" is signified by the C<st_nlink> field being zero (which is
		1350	otherwise always forced to be at least one) and all the other fields of
		1351	the stat buffer having unspecified contents.
		1352
		1353	The path I<should> be absolute and I<must not> end in a slash. If it is
		1354	relative and your working directory changes, the behaviour is undefined.
		1355
		1356	Since there is no standard to do this, the portable implementation simply
		1357	calls C<stat (2)> regularly on the path to see if it changed somehow. You
		1358	can specify a recommended polling interval for this case. If you specify
		1359	a polling interval of C<0> (highly recommended!) then a I<suitable,
		1360	unspecified default> value will be used (which you can expect to be around
		1361	five seconds, although this might change dynamically). Libev will also
		1362	impose a minimum interval which is currently around C<0.1>, but thats
		1363	usually overkill.
		1364
		1365	This watcher type is not meant for massive numbers of stat watchers,
		1366	as even with OS-supported change notifications, this can be
		1367	resource-intensive.
		1368
		1369	At the time of this writing, only the Linux inotify interface is
		1370	implemented (implementing kqueue support is left as an exercise for the
		1371	reader). Inotify will be used to give hints only and should not change the
		1372	semantics of C<ev_stat> watchers, which means that libev sometimes needs
		1373	to fall back to regular polling again even with inotify, but changes are
		1374	usually detected immediately, and if the file exists there will be no
		1375	polling.
		1376
		1377	=head3 Watcher-Specific Functions and Data Members
		1378
		1379	=over 4
		1380
		1381	=item ev_stat_init (ev_stat , callback, const char path, ev_tstamp interval)
		1382
		1383	=item ev_stat_set (ev_stat , const char path, ev_tstamp interval)
		1384
		1385	Configures the watcher to wait for status changes of the given
		1386	C<path>. The C<interval> is a hint on how quickly a change is expected to
		1387	be detected and should normally be specified as C<0> to let libev choose
		1388	a suitable value. The memory pointed to by C<path> must point to the same
		1389	path for as long as the watcher is active.
		1390
		1391	The callback will be receive C<EV_STAT> when a change was detected,
		1392	relative to the attributes at the time the watcher was started (or the
		1393	last change was detected).
		1394
		1395	=item ev_stat_stat (ev_stat *)
		1396
		1397	Updates the stat buffer immediately with new values. If you change the
		1398	watched path in your callback, you could call this fucntion to avoid
		1399	detecting this change (while introducing a race condition). Can also be
		1400	useful simply to find out the new values.
		1401
		1402	=item ev_statdata attr [read-only]
		1403
		1404	The most-recently detected attributes of the file. Although the type is of
		1405	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types
		1406	suitable for your system. If the C<st_nlink> member is C<0>, then there
		1407	was some error while C<stat>ing the file.
		1408
		1409	=item ev_statdata prev [read-only]
		1410
		1411	The previous attributes of the file. The callback gets invoked whenever
		1412	C<prev> != C<attr>.
		1413
		1414	=item ev_tstamp interval [read-only]
		1415
		1416	The specified interval.
		1417
		1418	=item const char *path [read-only]
		1419
		1420	The filesystem path that is being watched.
		1421
		1422	=back
		1423
		1424	Example: Watch C</etc/passwd> for attribute changes.
		1425
		1426	static void
		1427	passwd_cb (struct ev_loop loop, ev_stat w, int revents)
		1428	{
		1429	/* /etc/passwd changed in some way */
		1430	if (w->attr.st_nlink)
		1431	{
		1432	printf ("passwd current size %ld\n", (long)w->attr.st_size);
		1433	printf ("passwd current atime %ld\n", (long)w->attr.st_mtime);
		1434	printf ("passwd current mtime %ld\n", (long)w->attr.st_mtime);
		1435	}
		1436	else
		1437	/* you shalt not abuse printf for puts */
		1438	puts ("wow, /etc/passwd is not there, expect problems. "
		1439	"if this is windows, they already arrived\n");
		1440	}
		1441
		1442	...
		1443	ev_stat passwd;
		1444
		1445	ev_stat_init (&passwd, passwd_cb, "/etc/passwd");
		1446	ev_stat_start (loop, &passwd);
		1447
		1448
1057	=head2 C<ev_idle> - when you've got nothing better to do...	1449	=head2 C<ev_idle> - when you've got nothing better to do...
1058		1450
1059	Idle watchers trigger events when there are no other events are pending	1451	Idle watchers trigger events when no other events of the same or higher
1060	(prepare, check and other idle watchers do not count). That is, as long	1452	priority are pending (prepare, check and other idle watchers do not
1061	as your process is busy handling sockets or timeouts (or even signals,	1453	count).
1062	imagine) it will not be triggered. But when your process is idle all idle	1454
1063	watchers are being called again and again, once per event loop iteration -	1455	That is, as long as your process is busy handling sockets or timeouts
		1456	(or even signals, imagine) of the same or higher priority it will not be
		1457	triggered. But when your process is idle (or only lower-priority watchers
		1458	are pending), the idle watchers are being called once per event loop
1064	until stopped, that is, or your process receives more events and becomes	1459	iteration - until stopped, that is, or your process receives more events
1065	busy.	1460	and becomes busy again with higher priority stuff.
1066		1461
1067	The most noteworthy effect is that as long as any idle watchers are	1462	The most noteworthy effect is that as long as any idle watchers are
1068	active, the process will not block when waiting for new events.	1463	active, the process will not block when waiting for new events.
1069		1464
1070	Apart from keeping your process non-blocking (which is a useful	1465	Apart from keeping your process non-blocking (which is a useful
1071	effect on its own sometimes), idle watchers are a good place to do	1466	effect on its own sometimes), idle watchers are a good place to do
1072	"pseudo-background processing", or delay processing stuff to after the	1467	"pseudo-background processing", or delay processing stuff to after the
1073	event loop has handled all outstanding events.	1468	event loop has handled all outstanding events.
1074		1469
		1470	=head3 Watcher-Specific Functions and Data Members
		1471
1075	=over 4	1472	=over 4
1076		1473
1077	=item ev_idle_init (ev_signal *, callback)	1474	=item ev_idle_init (ev_signal *, callback)
1078		1475
1079	Initialises and configures the idle watcher - it has no parameters of any	1476	Initialises and configures the idle watcher - it has no parameters of any
1080	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,	1477	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,
1081	believe me.	1478	believe me.
1082		1479
1083	=back	1480	=back
1084		1481
1085	Example: dynamically allocate an C<ev_idle>, start it, and in the	1482	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the
1086	callback, free it. Alos, use no error checking, as usual.	1483	callback, free it. Also, use no error checking, as usual.
1087		1484
1088	static void	1485	static void
1089	idle_cb (struct ev_loop loop, struct ev_idle w, int revents)	1486	idle_cb (struct ev_loop loop, struct ev_idle w, int revents)
1090	{	1487	{
1091	free (w);	1488	free (w);
…		…
1136	with priority higher than or equal to the event loop and one coroutine	1533	with priority higher than or equal to the event loop and one coroutine
1137	of lower priority, but only once, using idle watchers to keep the event	1534	of lower priority, but only once, using idle watchers to keep the event
1138	loop from blocking if lower-priority coroutines are active, thus mapping	1535	loop from blocking if lower-priority coroutines are active, thus mapping
1139	low-priority coroutines to idle/background tasks).	1536	low-priority coroutines to idle/background tasks).
1140		1537
		1538	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)
		1539	priority, to ensure that they are being run before any other watchers
		1540	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,
		1541	too) should not activate ("feed") events into libev. While libev fully
		1542	supports this, they will be called before other C<ev_check> watchers did
		1543	their job. As C<ev_check> watchers are often used to embed other event
		1544	loops those other event loops might be in an unusable state until their
		1545	C<ev_check> watcher ran (always remind yourself to coexist peacefully with
		1546	others).
		1547
		1548	=head3 Watcher-Specific Functions and Data Members
		1549
1141	=over 4	1550	=over 4
1142		1551
1143	=item ev_prepare_init (ev_prepare *, callback)	1552	=item ev_prepare_init (ev_prepare *, callback)
1144		1553
1145	=item ev_check_init (ev_check *, callback)	1554	=item ev_check_init (ev_check *, callback)
…		…
1148	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>	1557	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>
1149	macros, but using them is utterly, utterly and completely pointless.	1558	macros, but using them is utterly, utterly and completely pointless.
1150		1559
1151	=back	1560	=back
1152		1561
1153	Example: To include a library such as adns, you would add IO watchers	1562	There are a number of principal ways to embed other event loops or modules
1154	and a timeout watcher in a prepare handler, as required by libadns, and	1563	into libev. Here are some ideas on how to include libadns into libev
		1564	(there is a Perl module named C<EV::ADNS> that does this, which you could
		1565	use for an actually working example. Another Perl module named C<EV::Glib>
		1566	embeds a Glib main context into libev, and finally, C<Glib::EV> embeds EV
		1567	into the Glib event loop).
		1568
		1569	Method 1: Add IO watchers and a timeout watcher in a prepare handler,
1155	in a check watcher, destroy them and call into libadns. What follows is	1570	and in a check watcher, destroy them and call into libadns. What follows
1156	pseudo-code only of course:	1571	is pseudo-code only of course. This requires you to either use a low
		1572	priority for the check watcher or use C<ev_clear_pending> explicitly, as
		1573	the callbacks for the IO/timeout watchers might not have been called yet.
1157		1574
1158	static ev_io iow [nfd];	1575	static ev_io iow [nfd];
1159	static ev_timer tw;	1576	static ev_timer tw;
1160		1577
1161	static void	1578	static void
1162	io_cb (ev_loop loop, ev_io w, int revents)	1579	io_cb (ev_loop loop, ev_io w, int revents)
1163	{	1580	{
1164	// set the relevant poll flags
1165	// could also call adns_processreadable etc. here
1166	struct pollfd fd = (struct pollfd )w->data;
1167	if (revents & EV_READ ) fd->revents \|= fd->events & POLLIN;
1168	if (revents & EV_WRITE) fd->revents \|= fd->events & POLLOUT;
1169	}	1581	}
1170		1582
1171	// create io watchers for each fd and a timer before blocking	1583	// create io watchers for each fd and a timer before blocking
1172	static void	1584	static void
1173	adns_prepare_cb (ev_loop loop, ev_prepare w, int revents)	1585	adns_prepare_cb (ev_loop loop, ev_prepare w, int revents)
1174	{	1586	{
1175	int timeout = 3600000;truct pollfd fds [nfd];	1587	int timeout = 3600000;
		1588	struct pollfd fds [nfd];
1176	// actual code will need to loop here and realloc etc.	1589	// actual code will need to loop here and realloc etc.
1177	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));	1590	adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));
1178		1591
1179	/* the callback is illegal, but won't be called as we stop during check */	1592	/* the callback is illegal, but won't be called as we stop during check */
1180	ev_timer_init (&tw, 0, timeout * 1e-3);	1593	ev_timer_init (&tw, 0, timeout * 1e-3);
1181	ev_timer_start (loop, &tw);	1594	ev_timer_start (loop, &tw);
1182		1595
1183	// create on ev_io per pollfd	1596	// create one ev_io per pollfd
1184	for (int i = 0; i < nfd; ++i)	1597	for (int i = 0; i < nfd; ++i)
1185	{	1598	{
1186	ev_io_init (iow + i, io_cb, fds [i].fd,	1599	ev_io_init (iow + i, io_cb, fds [i].fd,
1187	((fds [i].events & POLLIN ? EV_READ : 0)	1600	((fds [i].events & POLLIN ? EV_READ : 0)
1188	\| (fds [i].events & POLLOUT ? EV_WRITE : 0)));	1601	\| (fds [i].events & POLLOUT ? EV_WRITE : 0)));
1189		1602
1190	fds [i].revents = 0;	1603	fds [i].revents = 0;
1191	iow [i].data = fds + i;
1192	ev_io_start (loop, iow + i);	1604	ev_io_start (loop, iow + i);
1193	}	1605	}
1194	}	1606	}
1195		1607
1196	// stop all watchers after blocking	1608	// stop all watchers after blocking
…		…
1198	adns_check_cb (ev_loop loop, ev_check w, int revents)	1610	adns_check_cb (ev_loop loop, ev_check w, int revents)
1199	{	1611	{
1200	ev_timer_stop (loop, &tw);	1612	ev_timer_stop (loop, &tw);
1201		1613
1202	for (int i = 0; i < nfd; ++i)	1614	for (int i = 0; i < nfd; ++i)
		1615	{
		1616	// set the relevant poll flags
		1617	// could also call adns_processreadable etc. here
		1618	struct pollfd *fd = fds + i;
		1619	int revents = ev_clear_pending (iow + i);
		1620	if (revents & EV_READ ) fd->revents \|= fd->events & POLLIN;
		1621	if (revents & EV_WRITE) fd->revents \|= fd->events & POLLOUT;
		1622
		1623	// now stop the watcher
1203	ev_io_stop (loop, iow + i);	1624	ev_io_stop (loop, iow + i);
		1625	}
1204		1626
1205	adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));	1627	adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));
		1628	}
		1629
		1630	Method 2: This would be just like method 1, but you run C<adns_afterpoll>
		1631	in the prepare watcher and would dispose of the check watcher.
		1632
		1633	Method 3: If the module to be embedded supports explicit event
		1634	notification (adns does), you can also make use of the actual watcher
		1635	callbacks, and only destroy/create the watchers in the prepare watcher.
		1636
		1637	static void
		1638	timer_cb (EV_P_ ev_timer *w, int revents)
		1639	{
		1640	adns_state ads = (adns_state)w->data;
		1641	update_now (EV_A);
		1642
		1643	adns_processtimeouts (ads, &tv_now);
		1644	}
		1645
		1646	static void
		1647	io_cb (EV_P_ ev_io *w, int revents)
		1648	{
		1649	adns_state ads = (adns_state)w->data;
		1650	update_now (EV_A);
		1651
		1652	if (revents & EV_READ ) adns_processreadable (ads, w->fd, &tv_now);
		1653	if (revents & EV_WRITE) adns_processwriteable (ads, w->fd, &tv_now);
		1654	}
		1655
		1656	// do not ever call adns_afterpoll
		1657
		1658	Method 4: Do not use a prepare or check watcher because the module you
		1659	want to embed is too inflexible to support it. Instead, youc na override
		1660	their poll function. The drawback with this solution is that the main
		1661	loop is now no longer controllable by EV. The C<Glib::EV> module does
		1662	this.
		1663
		1664	static gint
		1665	event_poll_func (GPollFD *fds, guint nfds, gint timeout)
		1666	{
		1667	int got_events = 0;
		1668
		1669	for (n = 0; n < nfds; ++n)
		1670	// create/start io watcher that sets the relevant bits in fds[n] and increment got_events
		1671
		1672	if (timeout >= 0)
		1673	// create/start timer
		1674
		1675	// poll
		1676	ev_loop (EV_A_ 0);
		1677
		1678	// stop timer again
		1679	if (timeout >= 0)
		1680	ev_timer_stop (EV_A_ &to);
		1681
		1682	// stop io watchers again - their callbacks should have set
		1683	for (n = 0; n < nfds; ++n)
		1684	ev_io_stop (EV_A_ iow [n]);
		1685
		1686	return got_events;
1206	}	1687	}
1207		1688
1208		1689
1209	=head2 C<ev_embed> - when one backend isn't enough...	1690	=head2 C<ev_embed> - when one backend isn't enough...
1210		1691
…		…
1274	ev_embed_start (loop_hi, &embed);	1755	ev_embed_start (loop_hi, &embed);
1275	}	1756	}
1276	else	1757	else
1277	loop_lo = loop_hi;	1758	loop_lo = loop_hi;
1278		1759
		1760	=head3 Watcher-Specific Functions and Data Members
		1761
1279	=over 4	1762	=over 4
1280		1763
1281	=item ev_embed_init (ev_embed , callback, struct ev_loop embedded_loop)	1764	=item ev_embed_init (ev_embed , callback, struct ev_loop embedded_loop)
1282		1765
1283	=item ev_embed_set (ev_embed , callback, struct ev_loop embedded_loop)	1766	=item ev_embed_set (ev_embed , callback, struct ev_loop embedded_loop)
…		…
1292		1775
1293	Make a single, non-blocking sweep over the embedded loop. This works	1776	Make a single, non-blocking sweep over the embedded loop. This works
1294	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most	1777	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
1295	apropriate way for embedded loops.	1778	apropriate way for embedded loops.
1296		1779
		1780	=item struct ev_loop *loop [read-only]
		1781
		1782	The embedded event loop.
		1783
		1784	=back
		1785
		1786
		1787	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
		1788
		1789	Fork watchers are called when a C<fork ()> was detected (usually because
		1790	whoever is a good citizen cared to tell libev about it by calling
		1791	C<ev_default_fork> or C<ev_loop_fork>). The invocation is done before the
		1792	event loop blocks next and before C<ev_check> watchers are being called,
		1793	and only in the child after the fork. If whoever good citizen calling
		1794	C<ev_default_fork> cheats and calls it in the wrong process, the fork
		1795	handlers will be invoked, too, of course.
		1796
		1797	=head3 Watcher-Specific Functions and Data Members
		1798
		1799	=over 4
		1800
		1801	=item ev_fork_init (ev_signal *, callback)
		1802
		1803	Initialises and configures the fork watcher - it has no parameters of any
		1804	kind. There is a C<ev_fork_set> macro, but using it is utterly pointless,
		1805	believe me.
		1806
1297	=back	1807	=back
1298		1808
1299		1809
1300	=head1 OTHER FUNCTIONS	1810	=head1 OTHER FUNCTIONS
1301		1811
…		…
1389		1899
1390	To use it,	1900	To use it,
1391		1901
1392	#include <ev++.h>	1902	#include <ev++.h>
1393		1903
1394	(it is not installed by default). This automatically includes F<ev.h>	1904	This automatically includes F<ev.h> and puts all of its definitions (many
1395	and puts all of its definitions (many of them macros) into the global	1905	of them macros) into the global namespace. All C++ specific things are
1396	namespace. All C++ specific things are put into the C<ev> namespace.	1906	put into the C<ev> namespace. It should support all the same embedding
		1907	options as F<ev.h>, most notably C<EV_MULTIPLICITY>.
1397		1908
1398	It should support all the same embedding options as F<ev.h>, most notably	1909	Care has been taken to keep the overhead low. The only data member the C++
1399	C<EV_MULTIPLICITY>.	1910	classes add (compared to plain C-style watchers) is the event loop pointer
		1911	that the watcher is associated with (or no additional members at all if
		1912	you disable C<EV_MULTIPLICITY> when embedding libev).
		1913
		1914	Currently, functions, and static and non-static member functions can be
		1915	used as callbacks. Other types should be easy to add as long as they only
		1916	need one additional pointer for context. If you need support for other
		1917	types of functors please contact the author (preferably after implementing
		1918	it).
1400		1919
1401	Here is a list of things available in the C<ev> namespace:	1920	Here is a list of things available in the C<ev> namespace:
1402		1921
1403	=over 4	1922	=over 4
1404		1923
…		…
1420		1939
1421	All of those classes have these methods:	1940	All of those classes have these methods:
1422		1941
1423	=over 4	1942	=over 4
1424		1943
1425	=item ev::TYPE::TYPE (object , object::method )	1944	=item ev::TYPE::TYPE ()
1426		1945
1427	=item ev::TYPE::TYPE (object , object::method , struct ev_loop *)	1946	=item ev::TYPE::TYPE (struct ev_loop *)
1428		1947
1429	=item ev::TYPE::~TYPE	1948	=item ev::TYPE::~TYPE
1430		1949
1431	The constructor takes a pointer to an object and a method pointer to	1950	The constructor (optionally) takes an event loop to associate the watcher
1432	the event handler callback to call in this class. The constructor calls	1951	with. If it is omitted, it will use C<EV_DEFAULT>.
1433	C<ev_init> for you, which means you have to call the C<set> method	1952
1434	before starting it. If you do not specify a loop then the constructor	1953	The constructor calls C<ev_init> for you, which means you have to call the
1435	automatically associates the default loop with this watcher.	1954	C<set> method before starting it.
		1955
		1956	It will not set a callback, however: You have to call the templated C<set>
		1957	method to set a callback before you can start the watcher.
		1958
		1959	(The reason why you have to use a method is a limitation in C++ which does
		1960	not allow explicit template arguments for constructors).
1436		1961
1437	The destructor automatically stops the watcher if it is active.	1962	The destructor automatically stops the watcher if it is active.
		1963
		1964	=item w->set<class, &class::method> (object *)
		1965
		1966	This method sets the callback method to call. The method has to have a
		1967	signature of C<void (*)(ev_TYPE &, int)>, it receives the watcher as
		1968	first argument and the C<revents> as second. The object must be given as
		1969	parameter and is stored in the C<data> member of the watcher.
		1970
		1971	This method synthesizes efficient thunking code to call your method from
		1972	the C callback that libev requires. If your compiler can inline your
		1973	callback (i.e. it is visible to it at the place of the C<set> call and
		1974	your compiler is good :), then the method will be fully inlined into the
		1975	thunking function, making it as fast as a direct C callback.
		1976
		1977	Example: simple class declaration and watcher initialisation
		1978
		1979	struct myclass
		1980	{
		1981	void io_cb (ev::io &w, int revents) { }
		1982	}
		1983
		1984	myclass obj;
		1985	ev::io iow;
		1986	iow.set <myclass, &myclass::io_cb> (&obj);
		1987
		1988	=item w->set<function> (void *data = 0)
		1989
		1990	Also sets a callback, but uses a static method or plain function as
		1991	callback. The optional C<data> argument will be stored in the watcher's
		1992	C<data> member and is free for you to use.
		1993
		1994	The prototype of the C<function> must be C<void (*)(ev::TYPE &w, int)>.
		1995
		1996	See the method-C<set> above for more details.
		1997
		1998	Example:
		1999
		2000	static void io_cb (ev::io &w, int revents) { }
		2001	iow.set <io_cb> ();
1438		2002
1439	=item w->set (struct ev_loop *)	2003	=item w->set (struct ev_loop *)
1440		2004
1441	Associates a different C<struct ev_loop> with this watcher. You can only	2005	Associates a different C<struct ev_loop> with this watcher. You can only
1442	do this when the watcher is inactive (and not pending either).	2006	do this when the watcher is inactive (and not pending either).
1443		2007
1444	=item w->set ([args])	2008	=item w->set ([args])
1445		2009
1446	Basically the same as C<ev_TYPE_set>, with the same args. Must be	2010	Basically the same as C<ev_TYPE_set>, with the same args. Must be
1447	called at least once. Unlike the C counterpart, an active watcher gets	2011	called at least once. Unlike the C counterpart, an active watcher gets
1448	automatically stopped and restarted.	2012	automatically stopped and restarted when reconfiguring it with this
		2013	method.
1449		2014
1450	=item w->start ()	2015	=item w->start ()
1451		2016
1452	Starts the watcher. Note that there is no C<loop> argument as the	2017	Starts the watcher. Note that there is no C<loop> argument, as the
1453	constructor already takes the loop.	2018	constructor already stores the event loop.
1454		2019
1455	=item w->stop ()	2020	=item w->stop ()
1456		2021
1457	Stops the watcher if it is active. Again, no C<loop> argument.	2022	Stops the watcher if it is active. Again, no C<loop> argument.
1458		2023
…		…
1463		2028
1464	=item w->sweep () C<ev::embed> only	2029	=item w->sweep () C<ev::embed> only
1465		2030
1466	Invokes C<ev_embed_sweep>.	2031	Invokes C<ev_embed_sweep>.
1467		2032
		2033	=item w->update () C<ev::stat> only
		2034
		2035	Invokes C<ev_stat_stat>.
		2036
1468	=back	2037	=back
1469		2038
1470	=back	2039	=back
1471		2040
1472	Example: Define a class with an IO and idle watcher, start one of them in	2041	Example: Define a class with an IO and idle watcher, start one of them in
…		…
1479		2048
1480	myclass ();	2049	myclass ();
1481	}	2050	}
1482		2051
1483	myclass::myclass (int fd)	2052	myclass::myclass (int fd)
1484	: io (this, &myclass::io_cb),
1485	idle (this, &myclass::idle_cb)
1486	{	2053	{
		2054	io .set <myclass, &myclass::io_cb > (this);
		2055	idle.set <myclass, &myclass::idle_cb> (this);
		2056
1487	io.start (fd, ev::READ);	2057	io.start (fd, ev::READ);
1488	}	2058	}
		2059
		2060
		2061	=head1 MACRO MAGIC
		2062
		2063	Libev can be compiled with a variety of options, the most fundemantal is
		2064	C<EV_MULTIPLICITY>. This option determines whether (most) functions and
		2065	callbacks have an initial C<struct ev_loop *> argument.
		2066
		2067	To make it easier to write programs that cope with either variant, the
		2068	following macros are defined:
		2069
		2070	=over 4
		2071
		2072	=item C<EV_A>, C<EV_A_>
		2073
		2074	This provides the loop I<argument> for functions, if one is required ("ev
		2075	loop argument"). The C<EV_A> form is used when this is the sole argument,
		2076	C<EV_A_> is used when other arguments are following. Example:
		2077
		2078	ev_unref (EV_A);
		2079	ev_timer_add (EV_A_ watcher);
		2080	ev_loop (EV_A_ 0);
		2081
		2082	It assumes the variable C<loop> of type C<struct ev_loop *> is in scope,
		2083	which is often provided by the following macro.
		2084
		2085	=item C<EV_P>, C<EV_P_>
		2086
		2087	This provides the loop I<parameter> for functions, if one is required ("ev
		2088	loop parameter"). The C<EV_P> form is used when this is the sole parameter,
		2089	C<EV_P_> is used when other parameters are following. Example:
		2090
		2091	// this is how ev_unref is being declared
		2092	static void ev_unref (EV_P);
		2093
		2094	// this is how you can declare your typical callback
		2095	static void cb (EV_P_ ev_timer *w, int revents)
		2096
		2097	It declares a parameter C<loop> of type C<struct ev_loop *>, quite
		2098	suitable for use with C<EV_A>.
		2099
		2100	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
		2101
		2102	Similar to the other two macros, this gives you the value of the default
		2103	loop, if multiple loops are supported ("ev loop default").
		2104
		2105	=back
		2106
		2107	Example: Declare and initialise a check watcher, utilising the above
		2108	macros so it will work regardless of whether multiple loops are supported
		2109	or not.
		2110
		2111	static void
		2112	check_cb (EV_P_ ev_timer *w, int revents)
		2113	{
		2114	ev_check_stop (EV_A_ w);
		2115	}
		2116
		2117	ev_check check;
		2118	ev_check_init (&check, check_cb);
		2119	ev_check_start (EV_DEFAULT_ &check);
		2120	ev_loop (EV_DEFAULT_ 0);
1489		2121
1490	=head1 EMBEDDING	2122	=head1 EMBEDDING
1491		2123
1492	Libev can (and often is) directly embedded into host	2124	Libev can (and often is) directly embedded into host
1493	applications. Examples of applications that embed it include the Deliantra	2125	applications. Examples of applications that embed it include the Deliantra
…		…
1533	ev_vars.h	2165	ev_vars.h
1534	ev_wrap.h	2166	ev_wrap.h
1535		2167
1536	ev_win32.c required on win32 platforms only	2168	ev_win32.c required on win32 platforms only
1537		2169
1538	ev_select.c only when select backend is enabled (which is by default)	2170	ev_select.c only when select backend is enabled (which is enabled by default)
1539	ev_poll.c only when poll backend is enabled (disabled by default)	2171	ev_poll.c only when poll backend is enabled (disabled by default)
1540	ev_epoll.c only when the epoll backend is enabled (disabled by default)	2172	ev_epoll.c only when the epoll backend is enabled (disabled by default)
1541	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)	2173	ev_kqueue.c only when the kqueue backend is enabled (disabled by default)
1542	ev_port.c only when the solaris port backend is enabled (disabled by default)	2174	ev_port.c only when the solaris port backend is enabled (disabled by default)
1543		2175
…		…
1668		2300
1669	=item EV_USE_DEVPOLL	2301	=item EV_USE_DEVPOLL
1670		2302
1671	reserved for future expansion, works like the USE symbols above.	2303	reserved for future expansion, works like the USE symbols above.
1672		2304
		2305	=item EV_USE_INOTIFY
		2306
		2307	If defined to be C<1>, libev will compile in support for the Linux inotify
		2308	interface to speed up C<ev_stat> watchers. Its actual availability will
		2309	be detected at runtime.
		2310
1673	=item EV_H	2311	=item EV_H
1674		2312
1675	The name of the F<ev.h> header file used to include it. The default if	2313	The name of the F<ev.h> header file used to include it. The default if
1676	undefined is C<< <ev.h> >> in F<event.h> and C<"ev.h"> in F<ev.c>. This	2314	undefined is C<< <ev.h> >> in F<event.h> and C<"ev.h"> in F<ev.c>. This
1677	can be used to virtually rename the F<ev.h> header file in case of conflicts.	2315	can be used to virtually rename the F<ev.h> header file in case of conflicts.
…		…
1700	will have the C<struct ev_loop *> as first argument, and you can create	2338	will have the C<struct ev_loop *> as first argument, and you can create
1701	additional independent event loops. Otherwise there will be no support	2339	additional independent event loops. Otherwise there will be no support
1702	for multiple event loops and there is no first event loop pointer	2340	for multiple event loops and there is no first event loop pointer
1703	argument. Instead, all functions act on the single default loop.	2341	argument. Instead, all functions act on the single default loop.
1704		2342
		2343	=item EV_MINPRI
		2344
		2345	=item EV_MAXPRI
		2346
		2347	The range of allowed priorities. C<EV_MINPRI> must be smaller or equal to
		2348	C<EV_MAXPRI>, but otherwise there are no non-obvious limitations. You can
		2349	provide for more priorities by overriding those symbols (usually defined
		2350	to be C<-2> and C<2>, respectively).
		2351
		2352	When doing priority-based operations, libev usually has to linearly search
		2353	all the priorities, so having many of them (hundreds) uses a lot of space
		2354	and time, so using the defaults of five priorities (-2 .. +2) is usually
		2355	fine.
		2356
		2357	If your embedding app does not need any priorities, defining these both to
		2358	C<0> will save some memory and cpu.
		2359
1705	=item EV_PERIODIC_ENABLE	2360	=item EV_PERIODIC_ENABLE
1706		2361
1707	If undefined or defined to be C<1>, then periodic timers are supported. If	2362	If undefined or defined to be C<1>, then periodic timers are supported. If
1708	defined to be C<0>, then they are not. Disabling them saves a few kB of	2363	defined to be C<0>, then they are not. Disabling them saves a few kB of
1709	code.	2364	code.
1710		2365
		2366	=item EV_IDLE_ENABLE
		2367
		2368	If undefined or defined to be C<1>, then idle watchers are supported. If
		2369	defined to be C<0>, then they are not. Disabling them saves a few kB of
		2370	code.
		2371
1711	=item EV_EMBED_ENABLE	2372	=item EV_EMBED_ENABLE
1712		2373
1713	If undefined or defined to be C<1>, then embed watchers are supported. If	2374	If undefined or defined to be C<1>, then embed watchers are supported. If
1714	defined to be C<0>, then they are not.	2375	defined to be C<0>, then they are not.
1715		2376
1716	=item EV_STAT_ENABLE	2377	=item EV_STAT_ENABLE
1717		2378
1718	If undefined or defined to be C<1>, then stat watchers are supported. If	2379	If undefined or defined to be C<1>, then stat watchers are supported. If
		2380	defined to be C<0>, then they are not.
		2381
		2382	=item EV_FORK_ENABLE
		2383
		2384	If undefined or defined to be C<1>, then fork watchers are supported. If
1719	defined to be C<0>, then they are not.	2385	defined to be C<0>, then they are not.
1720		2386
1721	=item EV_MINIMAL	2387	=item EV_MINIMAL
1722		2388
1723	If you need to shave off some kilobytes of code at the expense of some	2389	If you need to shave off some kilobytes of code at the expense of some
1724	speed, define this symbol to C<1>. Currently only used for gcc to override	2390	speed, define this symbol to C<1>. Currently only used for gcc to override
1725	some inlining decisions, saves roughly 30% codesize of amd64.	2391	some inlining decisions, saves roughly 30% codesize of amd64.
		2392
		2393	=item EV_PID_HASHSIZE
		2394
		2395	C<ev_child> watchers use a small hash table to distribute workload by
		2396	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more
		2397	than enough. If you need to manage thousands of children you might want to
		2398	increase this value (I<must> be a power of two).
		2399
		2400	=item EV_INOTIFY_HASHSIZE
		2401
		2402	C<ev_staz> watchers use a small hash table to distribute workload by
		2403	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),
		2404	usually more than enough. If you need to manage thousands of C<ev_stat>
		2405	watchers you might want to increase this value (I<must> be a power of
		2406	two).
1726		2407
1727	=item EV_COMMON	2408	=item EV_COMMON
1728		2409
1729	By default, all watchers have a C<void *data> member. By redefining	2410	By default, all watchers have a C<void *data> member. By redefining
1730	this macro to a something else you can include more and other types of	2411	this macro to a something else you can include more and other types of
…		…
1759	interface) and F<EV.xs> (implementation) files. Only the F<EV.xs> file	2440	interface) and F<EV.xs> (implementation) files. Only the F<EV.xs> file
1760	will be compiled. It is pretty complex because it provides its own header	2441	will be compiled. It is pretty complex because it provides its own header
1761	file.	2442	file.
1762		2443
1763	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file	2444	The usage in rxvt-unicode is simpler. It has a F<ev_cpp.h> header file
1764	that everybody includes and which overrides some autoconf choices:	2445	that everybody includes and which overrides some configure choices:
1765		2446
		2447	#define EV_MINIMAL 1
1766	#define EV_USE_POLL 0	2448	#define EV_USE_POLL 0
1767	#define EV_MULTIPLICITY 0	2449	#define EV_MULTIPLICITY 0
1768	#define EV_PERIODICS 0	2450	#define EV_PERIODIC_ENABLE 0
		2451	#define EV_STAT_ENABLE 0
		2452	#define EV_FORK_ENABLE 0
1769	#define EV_CONFIG_H <config.h>	2453	#define EV_CONFIG_H <config.h>
		2454	#define EV_MINPRI 0
		2455	#define EV_MAXPRI 0
1770		2456
1771	#include "ev++.h"	2457	#include "ev++.h"
1772		2458
1773	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:	2459	And a F<ev_cpp.C> implementation file that contains libev proper and is compiled:
1774		2460
…		…
1780		2466
1781	In this section the complexities of (many of) the algorithms used inside	2467	In this section the complexities of (many of) the algorithms used inside
1782	libev will be explained. For complexity discussions about backends see the	2468	libev will be explained. For complexity discussions about backends see the
1783	documentation for C<ev_default_init>.	2469	documentation for C<ev_default_init>.
1784		2470
		2471	All of the following are about amortised time: If an array needs to be
		2472	extended, libev needs to realloc and move the whole array, but this
		2473	happens asymptotically never with higher number of elements, so O(1) might
		2474	mean it might do a lengthy realloc operation in rare cases, but on average
		2475	it is much faster and asymptotically approaches constant time.
		2476
1785	=over 4	2477	=over 4
1786		2478
1787	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)	2479	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)
1788		2480
		2481	This means that, when you have a watcher that triggers in one hour and
		2482	there are 100 watchers that would trigger before that then inserting will
		2483	have to skip those 100 watchers.
		2484
1789	=item Changing timer/periodic watchers (by autorepeat, again): O(log skipped_other_timers)	2485	=item Changing timer/periodic watchers (by autorepeat, again): O(log skipped_other_timers)
1790		2486
		2487	That means that for changing a timer costs less than removing/adding them
		2488	as only the relative motion in the event queue has to be paid for.
		2489
1791	=item Starting io/check/prepare/idle/signal/child watchers: O(1)	2490	=item Starting io/check/prepare/idle/signal/child watchers: O(1)
1792		2491
		2492	These just add the watcher into an array or at the head of a list.
1793	=item Stopping check/prepare/idle watchers: O(1)	2493	=item Stopping check/prepare/idle watchers: O(1)
1794		2494
1795	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % 16))	2495	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
		2496
		2497	These watchers are stored in lists then need to be walked to find the
		2498	correct watcher to remove. The lists are usually short (you don't usually
		2499	have many watchers waiting for the same fd or signal).
1796		2500
1797	=item Finding the next timer per loop iteration: O(1)	2501	=item Finding the next timer per loop iteration: O(1)
1798		2502
1799	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)	2503	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
1800		2504
		2505	A change means an I/O watcher gets started or stopped, which requires
		2506	libev to recalculate its status (and possibly tell the kernel).
		2507
1801	=item Activating one watcher: O(1)	2508	=item Activating one watcher: O(1)
1802		2509
		2510	=item Priority handling: O(number_of_priorities)
		2511
		2512	Priorities are implemented by allocating some space for each
		2513	priority. When doing priority-based operations, libev usually has to
		2514	linearly search all the priorities.
		2515
1803	=back	2516	=back
1804		2517
1805		2518
1806	=head1 AUTHOR	2519	=head1 AUTHOR
1807		2520

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing libev/ev.pod (file contents): Revision 1.47 by root, Mon Nov 26 19:49:36 2007 UTC vs. Revision 1.83 by root, Wed Dec 12 17:55:31 2007 UTC

Diff Legend

Comparing libev/ev.pod (file contents):
Revision 1.47 by root, Mon Nov 26 19:49:36 2007 UTC vs.
Revision 1.83 by root, Wed Dec 12 17:55:31 2007 UTC